diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/msm8996.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8996.dtsi | 643 |
1 files changed, 489 insertions, 154 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 91bc974aeb0a..c0a2baffa49d 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -6,6 +6,8 @@ #include <dt-bindings/clock/qcom,gcc-msm8996.h> #include <dt-bindings/clock/qcom,mmcc-msm8996.h> #include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/interconnect/qcom,msm8996.h> +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,apr.h> #include <dt-bindings/thermal/thermal.h> @@ -134,7 +136,7 @@ }; }; - cluster0_opp: opp_table0 { + cluster0_opp: opp-table-cluster0 { compatible = "operating-points-v2-kryo-cpu"; nvmem-cells = <&speedbin_efuse>; opp-shared; @@ -222,7 +224,7 @@ }; }; - cluster1_opp: opp_table1 { + cluster1_opp: opp-table-cluster1 { compatible = "operating-points-v2-kryo-cpu"; nvmem-cells = <&speedbin_efuse>; opp-shared; @@ -357,17 +359,11 @@ firmware { scm { - compatible = "qcom,scm-msm8996"; - qcom,dload-mode = <&tcsr 0x13000>; + compatible = "qcom,scm-msm8996", "qcom,scm"; + qcom,dload-mode = <&tcsr_2 0x13000>; }; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x1000>; - #hwlock-cells = <1>; - }; - memory@80000000 { device_type = "memory"; /* We expect the bootloader to fill in the reg */ @@ -384,60 +380,65 @@ #size-cells = <2>; ranges; - mba_region: mba@91500000 { - reg = <0x0 0x91500000 0x0 0x200000>; + hyp_mem: memory@85800000 { + reg = <0x0 0x85800000 0x0 0x600000>; no-map; }; - slpi_region: slpi@90b00000 { - reg = <0x0 0x90b00000 0x0 0xa00000>; + xbl_mem: memory@85e00000 { + reg = <0x0 0x85e00000 0x0 0x200000>; no-map; }; - venus_region: venus@90400000 { - reg = <0x0 0x90400000 0x0 0x700000>; + smem_mem: smem-mem@86000000 { + reg = <0x0 0x86000000 0x0 0x200000>; no-map; }; - adsp_region: adsp@8ea00000 { - reg = <0x0 0x8ea00000 0x0 0x1a00000>; + tz_mem: memory@86200000 { + reg = <0x0 0x86200000 0x0 0x2600000>; no-map; }; - mpss_region: mpss@88800000 { - reg = <0x0 0x88800000 0x0 0x6200000>; + rmtfs_mem: rmtfs { + compatible = "qcom,rmtfs-mem"; + + size = <0x0 0x200000>; + alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>; no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; }; - smem_mem: smem-mem@86000000 { - reg = <0x0 0x86000000 0x0 0x200000>; + mpss_mem: mpss@88800000 { + reg = <0x0 0x88800000 0x0 0x6200000>; no-map; }; - memory@85800000 { - reg = <0x0 0x85800000 0x0 0x800000>; + adsp_mem: adsp@8ea00000 { + reg = <0x0 0x8ea00000 0x0 0x1b00000>; no-map; }; - memory@86200000 { - reg = <0x0 0x86200000 0x0 0x2600000>; + slpi_mem: slpi@90500000 { + reg = <0x0 0x90500000 0x0 0xa00000>; no-map; }; - rmtfs@86700000 { - compatible = "qcom,rmtfs-mem"; - - size = <0x0 0x200000>; - alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>; + gpu_mem: gpu@90f00000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x90f00000 0x0 0x100000>; no-map; + }; - qcom,client-id = <1>; - qcom,vmid = <15>; + venus_mem: venus@91000000 { + reg = <0x0 0x91000000 0x0 0x500000>; + no-map; }; - zap_shader_region: gpu@8f200000 { - compatible = "shared-dma-pool"; - reg = <0x0 0x90b00000 0x0 0xa00000>; + mba_mem: mba@91500000 { + reg = <0x0 0x91500000 0x0 0x200000>; no-map; }; }; @@ -456,8 +457,10 @@ qcom,glink-channels = "rpm_requests"; rpmcc: qcom,rpmcc { - compatible = "qcom,rpmcc-msm8996"; + compatible = "qcom,rpmcc-msm8996", "qcom,rpmcc"; #clock-cells = <1>; + clocks = <&xo_board>; + clock-names = "xo"; }; rpmpd: power-controller { @@ -513,12 +516,12 @@ qcom,local-pid = <0>; qcom,remote-pid = <2>; - smp2p_adsp_out: master-kernel { + adsp_smp2p_out: master-kernel { qcom,entry-name = "master-kernel"; #qcom,smem-state-cells = <1>; }; - smp2p_adsp_in: slave-kernel { + adsp_smp2p_in: slave-kernel { qcom,entry-name = "slave-kernel"; interrupt-controller; @@ -526,7 +529,7 @@ }; }; - smp2p-modem { + smp2p-mpss { compatible = "qcom,smp2p"; qcom,smem = <435>, <428>; @@ -537,12 +540,12 @@ qcom,local-pid = <0>; qcom,remote-pid = <1>; - modem_smp2p_out: master-kernel { + mpss_smp2p_out: master-kernel { qcom,entry-name = "master-kernel"; #qcom,smem-state-cells = <1>; }; - modem_smp2p_in: slave-kernel { + mpss_smp2p_in: slave-kernel { qcom,entry-name = "slave-kernel"; interrupt-controller; @@ -561,16 +564,17 @@ qcom,local-pid = <0>; qcom,remote-pid = <3>; - smp2p_slpi_in: slave-kernel { + slpi_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + slpi_smp2p_in: slave-kernel { qcom,entry-name = "slave-kernel"; + interrupt-controller; #interrupt-cells = <2>; }; - - smp2p_slpi_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; - }; }; soc: soc { @@ -579,12 +583,12 @@ ranges = <0 0 0 0xffffffff>; compatible = "simple-bus"; - pcie_phy: phy@34000 { + pcie_phy: phy-wrapper@34000 { compatible = "qcom,msm8996-qmp-pcie-phy"; reg = <0x00034000 0x488>; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x0 0x00034000 0x4000>; clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>, @@ -595,46 +599,55 @@ <&gcc GCC_PCIE_PHY_COM_BCR>, <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>; reset-names = "phy", "common", "cfg"; + status = "disabled"; - pciephy_0: phy@35000 { - reg = <0x00035000 0x130>, - <0x00035200 0x200>, - <0x00035400 0x1dc>; - #phy-cells = <0>; + pciephy_0: phy@1000 { + reg = <0x1000 0x130>, + <0x1200 0x200>, + <0x1400 0x1dc>; - #clock-cells = <1>; - clock-output-names = "pcie_0_pipe_clk_src"; clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; clock-names = "pipe0"; resets = <&gcc GCC_PCIE_0_PHY_BCR>; reset-names = "lane0"; - }; - pciephy_1: phy@36000 { - reg = <0x00036000 0x130>, - <0x00036200 0x200>, - <0x00036400 0x1dc>; + #clock-cells = <0>; + clock-output-names = "pcie_0_pipe_clk_src"; + #phy-cells = <0>; + }; + + pciephy_1: phy@2000 { + reg = <0x2000 0x130>, + <0x2200 0x200>, + <0x2400 0x1dc>; - clock-output-names = "pcie_1_pipe_clk_src"; clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; clock-names = "pipe1"; resets = <&gcc GCC_PCIE_1_PHY_BCR>; reset-names = "lane1"; - }; - pciephy_2: phy@37000 { - reg = <0x00037000 0x130>, - <0x00037200 0x200>, - <0x00037400 0x1dc>; + #clock-cells = <0>; + clock-output-names = "pcie_1_pipe_clk_src"; + #phy-cells = <0>; + }; + + pciephy_2: phy@3000 { + reg = <0x3000 0x130>, + <0x3200 0x200>, + <0x3400 0x1dc>; - clock-output-names = "pcie_2_pipe_clk_src"; clocks = <&gcc GCC_PCIE_2_PIPE_CLK>; clock-names = "pipe2"; resets = <&gcc GCC_PCIE_2_PHY_BCR>; reset-names = "lane2"; + + #clock-cells = <0>; + clock-output-names = "pcie_2_pipe_clk_src"; + + #phy-cells = <0>; }; }; @@ -644,7 +657,7 @@ }; qfprom@74000 { - compatible = "qcom,qfprom"; + compatible = "qcom,msm8996-qfprom", "qcom,qfprom"; reg = <0x00074000 0x8ff>; #address-cells = <1>; #size-cells = <1>; @@ -679,8 +692,33 @@ #power-domain-cells = <1>; reg = <0x00300000 0x90000>; - clocks = <&rpmcc RPM_SMD_LN_BB_CLK>; - clock-names = "cxo2"; + clocks = <&rpmcc RPM_SMD_BB_CLK1>, + <&rpmcc RPM_SMD_LN_BB_CLK>, + <&sleep_clk>, + <&pciephy_0>, + <&pciephy_1>, + <&pciephy_2>, + <&ssusb_phy_0>, + <0>, <0>, <0>; + clock-names = "cxo", + "cxo2", + "sleep_clk", + "pcie_0_pipe_clk_src", + "pcie_1_pipe_clk_src", + "pcie_2_pipe_clk_src", + "usb3_phy_pipe_clk_src", + "ufs_rx_symbol_0_clk_src", + "ufs_rx_symbol_1_clk_src", + "ufs_tx_symbol_0_clk_src"; + }; + + bimc: interconnect@408000 { + compatible = "qcom,msm8996-bimc"; + reg = <0x00408000 0x5a000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; }; tsens0: thermal-sensor@4a9000 { @@ -705,7 +743,7 @@ #thermal-sensor-cells = <1>; }; - cryptobam: dma@644000 { + cryptobam: dma-controller@644000 { compatible = "qcom,bam-v1.7.0"; reg = <0x00644000 0x24000>; interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; @@ -713,7 +751,7 @@ clock-names = "bam_clk"; #dma-cells = <1>; qcom,ee = <0>; - qcom,controlled-remotely = <1>; + qcom,controlled-remotely; }; crypto: crypto@67a000 { @@ -727,12 +765,86 @@ dma-names = "rx", "tx"; }; - tcsr_mutex_regs: syscon@740000 { - compatible = "syscon"; - reg = <0x00740000 0x40000>; + cnoc: interconnect@500000 { + compatible = "qcom,msm8996-cnoc"; + reg = <0x00500000 0x1000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_CNOC_CLK>, + <&rpmcc RPM_SMD_CNOC_A_CLK>; + }; + + snoc: interconnect@524000 { + compatible = "qcom,msm8996-snoc"; + reg = <0x00524000 0x1c000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + }; + + a0noc: interconnect@543000 { + compatible = "qcom,msm8996-a0noc"; + reg = <0x00543000 0x6000>; + #interconnect-cells = <1>; + clock-names = "aggre0_snoc_axi", + "aggre0_cnoc_ahb", + "aggre0_noc_mpu_cfg"; + clocks = <&gcc GCC_AGGRE0_SNOC_AXI_CLK>, + <&gcc GCC_AGGRE0_CNOC_AHB_CLK>, + <&gcc GCC_AGGRE0_NOC_MPU_CFG_AHB_CLK>; + power-domains = <&gcc AGGRE0_NOC_GDSC>; + }; + + a1noc: interconnect@562000 { + compatible = "qcom,msm8996-a1noc"; + reg = <0x00562000 0x5000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_AGGR1_NOC_CLK>, + <&rpmcc RPM_SMD_AGGR1_NOC_A_CLK>; + }; + + a2noc: interconnect@583000 { + compatible = "qcom,msm8996-a2noc"; + reg = <0x00583000 0x7000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>, + <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>; + }; + + mnoc: interconnect@5a4000 { + compatible = "qcom,msm8996-mnoc"; + reg = <0x005a4000 0x1c000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a", "iface"; + clocks = <&rpmcc RPM_SMD_MMAXI_CLK>, + <&rpmcc RPM_SMD_MMAXI_A_CLK>, + <&mmcc AHB_CLK_SRC>; + }; + + pnoc: interconnect@5c0000 { + compatible = "qcom,msm8996-pnoc"; + reg = <0x005c0000 0x3000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, + <&rpmcc RPM_SMD_PCNOC_A_CLK>; + }; + + tcsr_mutex: hwlock@740000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x00740000 0x20000>; + #hwlock-cells = <1>; }; - tcsr: syscon@7a0000 { + tcsr_1: syscon@760000 { + compatible = "qcom,tcsr-msm8996", "syscon"; + reg = <0x00760000 0x20000>; + }; + + tcsr_2: syscon@7a0000 { compatible = "qcom,tcsr-msm8996", "syscon"; reg = <0x007a0000 0x18000>; }; @@ -743,6 +855,22 @@ #reset-cells = <1>; #power-domain-cells = <1>; reg = <0x008c0000 0x40000>; + clocks = <&xo_board>, + <&gcc GCC_MMSS_NOC_CFG_AHB_CLK>, + <&gcc GPLL0>, + <&dsi0_phy 1>, + <&dsi0_phy 0>, + <0>, + <0>, + <0>; + clock-names = "xo", + "gcc_mmss_noc_cfg_ahb_clk", + "gpll0", + "dsi0pll", + "dsi0pllbyte", + "dsi1pll", + "dsi1pllbyte", + "hdmipll"; assigned-clocks = <&mmcc MMPLL9_PLL>, <&mmcc MMPLL1_PLL>, <&mmcc MMPLL3_PLL>, @@ -771,8 +899,9 @@ interrupt-controller; #interrupt-cells = <1>; - clocks = <&mmcc MDSS_AHB_CLK>; - clock-names = "iface"; + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_MDP_CLK>; + clock-names = "iface", "core"; #address-cells = <1>; #size-cells = <1>; @@ -786,7 +915,7 @@ reg-names = "mdp_phys"; interrupt-parent = <&mdss>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0>; clocks = <&mmcc MDSS_AHB_CLK>, <&mmcc MDSS_AXI_CLK>, @@ -806,6 +935,11 @@ assigned-clock-rates = <300000000>, <19200000>; + interconnects = <&mnoc MASTER_MDP_PORT0 &bimc SLAVE_EBI_CH0>, + <&mnoc MASTER_MDP_PORT1 &bimc SLAVE_EBI_CH0>, + <&mnoc MASTER_ROTATOR &bimc SLAVE_EBI_CH0>; + interconnect-names = "mdp0-mem", "mdp1-mem", "rotator-mem"; + ports { #address-cells = <1>; #size-cells = <0>; @@ -823,6 +957,13 @@ remote-endpoint = <&dsi0_in>; }; }; + + port@2 { + reg = <2>; + mdp5_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; }; }; @@ -832,7 +973,7 @@ reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <4>; clocks = <&mmcc MDSS_MDP_CLK>, <&mmcc MDSS_BYTE0_CLK>, @@ -848,6 +989,8 @@ "core_mmss", "pixel", "core"; + assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; phys = <&dsi0_phy>; phy-names = "dsi"; @@ -887,7 +1030,75 @@ #clock-cells = <1>; #phy-cells = <0>; - clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>; + clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_BB_CLK1>; + clock-names = "iface", "ref"; + status = "disabled"; + }; + + dsi1: dsi@996000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x00996000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_BYTE1_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MMSS_MISC_AHB_CLK>, + <&mmcc MDSS_PCLK1_CLK>, + <&mmcc MDSS_ESC1_CLK>; + clock-names = "mdp_core", + "byte", + "iface", + "bus", + "core_mmss", + "pixel", + "core"; + assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&mdp5_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: dsi-phy@996400 { + compatible = "qcom,dsi-phy-14nm"; + reg = <0x00996400 0x100>, + <0x00996500 0x300>, + <0x00996800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_BB_CLK1>; clock-names = "iface", "ref"; status = "disabled"; }; @@ -902,7 +1113,7 @@ "hdcp_physical"; interrupt-parent = <&mdss>; - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <8>; clocks = <&mmcc MDSS_MDP_CLK>, <&mmcc MDSS_AHB_CLK>, @@ -917,7 +1128,6 @@ "extp"; phys = <&hdmi_phy>; - phy-names = "hdmi_phy"; #sound-dai-cells = <1>; status = "disabled"; @@ -952,9 +1162,13 @@ "hdmi_phy"; clocks = <&mmcc MDSS_AHB_CLK>, - <&gcc GCC_HDMI_CLKREF_CLK>; + <&gcc GCC_HDMI_CLKREF_CLK>, + <&xo_board>; clock-names = "iface", - "ref"; + "ref", + "xo"; + + #clock-cells = <0>; status = "disabled"; }; @@ -980,6 +1194,9 @@ "mem", "mem_iface"; + interconnects = <&bimc MASTER_GRAPHICS_3D &bimc SLAVE_EBI_CH0>; + interconnect-names = "gfx-mem"; + power-domains = <&mmcc GPU_GX_GDSC>; iommus = <&adreno_smmu 0>; @@ -993,7 +1210,7 @@ #cooling-cells = <2>; gpu_opp_table: opp-table { - compatible ="operating-points-v2"; + compatible = "operating-points-v2"; /* * 624Mhz and 560Mhz are only available on speed @@ -1031,7 +1248,7 @@ }; zap-shader { - memory-region = <&zap_shader_region>; + memory-region = <&gpu_mem>; }; }; @@ -1247,14 +1464,14 @@ pins = "gpio47", "gpio48"; function = "blsp_i2c3"; drive-strength = <16>; - bias-disable = <0>; + bias-disable; }; blsp1_i2c3_sleep: blsp1-i2c2-sleep { pins = "gpio47", "gpio48"; function = "gpio"; drive-strength = <2>; - bias-disable = <0>; + bias-disable; }; blsp2_uart3_4pins_default: blsp2-uart2-4pins { @@ -1546,7 +1763,7 @@ reg = <0x00290000 0x10000>; }; - spmi_bus: qcom,spmi@400f000 { + spmi_bus: spmi@400f000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0400f000 0x1000>, <0x04400000 0x800000>, @@ -1572,7 +1789,7 @@ ranges; pcie0: pcie@600000 { - compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; + compatible = "qcom,pcie-msm8996"; status = "disabled"; power-domains = <&gcc PCIE0_GDSC>; bus-range = <0x00 0xff>; @@ -1615,7 +1832,7 @@ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, <&gcc GCC_PCIE_0_SLV_AXI_CLK>; - clock-names = "pipe", + clock-names = "pipe", "aux", "cfg", "bus_master", @@ -1624,12 +1841,12 @@ }; pcie1: pcie@608000 { - compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; + compatible = "qcom,pcie-msm8996"; power-domains = <&gcc PCIE1_GDSC>; bus-range = <0x00 0xff>; num-lanes = <1>; - status = "disabled"; + status = "disabled"; reg = <0x00608000 0x2000>, <0x0d000000 0xf1d>, @@ -1669,7 +1886,7 @@ <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, <&gcc GCC_PCIE_1_SLV_AXI_CLK>; - clock-names = "pipe", + clock-names = "pipe", "aux", "cfg", "bus_master", @@ -1677,7 +1894,7 @@ }; pcie2: pcie@610000 { - compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; + compatible = "qcom,pcie-msm8996"; power-domains = <&gcc PCIE2_GDSC>; bus-range = <0x00 0xff>; num-lanes = <1>; @@ -1719,7 +1936,7 @@ <&gcc GCC_PCIE_2_MSTR_AXI_CLK>, <&gcc GCC_PCIE_2_SLV_AXI_CLK>; - clock-names = "pipe", + clock-names = "pipe", "aux", "cfg", "bus_master", @@ -1728,7 +1945,8 @@ }; ufshc: ufshc@624000 { - compatible = "qcom,ufshc"; + compatible = "qcom,msm8996-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; reg = <0x00624000 0x2500>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; @@ -2004,6 +2222,9 @@ <&mmcc VIDEO_AXI_CLK>, <&mmcc VIDEO_MAXI_CLK>; clock-names = "core", "iface", "bus", "mbus"; + interconnects = <&mnoc MASTER_VIDEO_P0 &bimc SLAVE_EBI_CH0>, + <&bimc MASTER_AMPSS_M0 &mnoc SLAVE_VENUS_CFG>; + interconnect-names = "video-mem", "cpu-cfg"; iommus = <&venus_smmu 0x00>, <&venus_smmu 0x01>, <&venus_smmu 0x0a>, @@ -2024,7 +2245,7 @@ <&venus_smmu 0x2c>, <&venus_smmu 0x2d>, <&venus_smmu 0x31>; - memory-region = <&venus_region>; + memory-region = <&venus_mem>; status = "disabled"; video-decoder { @@ -2120,6 +2341,105 @@ clock-names = "iface", "bus"; }; + slpi_pil: remoteproc@1c00000 { + compatible = "qcom,msm8996-slpi-pil"; + reg = <0x01c00000 0x4000>; + + interrupts-extended = <&intc 0 390 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&xo_board>, + <&rpmcc RPM_SMD_AGGR2_NOC_CLK>; + clock-names = "xo", "aggre2"; + + memory-region = <&slpi_mem>; + + qcom,smem-states = <&slpi_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + power-domains = <&rpmpd MSM8996_VDDSSCX>; + power-domain-names = "ssc_cx"; + + status = "disabled"; + + smd-edge { + interrupts = <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>; + + label = "dsps"; + mboxes = <&apcs_glb 25>; + qcom,smd-edge = <3>; + qcom,remote-pid = <3>; + }; + }; + + mss_pil: remoteproc@2080000 { + compatible = "qcom,msm8996-mss-pil"; + reg = <0x2080000 0x100>, + <0x2180000 0x020>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = <&intc 0 448 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack", + "shutdown-ack"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&xo_board>, + <&gcc GCC_MSS_GPLL0_DIV_CLK>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>, + <&rpmcc RPM_SMD_PCNOC_CLK>, + <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "iface", "bus", "mem", "xo", "gpll0_mss", + "snoc_axi", "mnoc_axi", "pnoc", "qdss"; + + resets = <&gcc GCC_MSS_RESTART>; + reset-names = "mss_restart"; + + power-domains = <&rpmpd MSM8996_VDDCX>, + <&rpmpd MSM8996_VDDMX>; + power-domain-names = "cx", "mx"; + + qcom,smem-states = <&mpss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x4000>; + + status = "disabled"; + + mba { + memory-region = <&mba_mem>; + }; + + mpss { + memory-region = <&mpss_mem>; + }; + + smd-edge { + interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; + + label = "mpss"; + mboxes = <&apcs_glb 12>; + qcom,smd-edge = <0>; + qcom,remote-pid = <1>; + }; + }; + stm@3002000 { compatible = "arm,coresight-stm", "arm,primecell"; reg = <0x3002000 0x1000>, @@ -2593,7 +2913,7 @@ reg = <0x06400000 0x90000>; clock-names = "xo"; - clocks = <&xo_board>; + clocks = <&rpmcc RPM_SMD_BB_CLK1>; #clock-cells = <1>; }; @@ -2610,20 +2930,28 @@ interrupt-names = "hs_phy_irq", "ss_phy_irq"; clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>, - <&gcc GCC_USB30_MASTER_CLK>, - <&gcc GCC_AGGRE2_USB3_AXI_CLK>, - <&gcc GCC_USB30_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_SLEEP_CLK>, - <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>; + <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_AGGRE2_USB3_AXI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, <&gcc GCC_USB30_MASTER_CLK>; assigned-clock-rates = <19200000>, <120000000>; + interconnects = <&a2noc MASTER_USB3 &bimc SLAVE_EBI_CH0>, + <&bimc MASTER_AMPSS_M0 &snoc SLAVE_USB3>; + interconnect-names = "usb-ddr", "apps-usb"; + power-domains = <&gcc USB30_GDSC>; status = "disabled"; - usb3_dwc3: dwc3@6a00000 { + usb3_dwc3: usb@6a00000 { compatible = "snps,dwc3"; reg = <0x06a00000 0xcc00>; interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>; @@ -2657,7 +2985,7 @@ <0x07410600 0x1a8>; #phy-cells = <0>; - #clock-cells = <1>; + #clock-cells = <0>; clock-output-names = "usb3_phy_pipe_clk_src"; clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; clock-names = "pipe0"; @@ -2692,10 +3020,10 @@ status = "disabled"; }; - sdhc1: sdhci@7464900 { - compatible = "qcom,sdhci-msm-v4"; + sdhc1: mmc@7464900 { + compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07464900 0x11c>, <0x07464000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; @@ -2704,7 +3032,8 @@ clock-names = "iface", "core", "xo"; clocks = <&gcc GCC_SDCC1_AHB_CLK>, <&gcc GCC_SDCC1_APPS_CLK>, - <&xo_board>; + <&rpmcc RPM_SMD_BB_CLK1>; + resets = <&gcc GCC_SDCC1_BCR>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdc1_state_on>; @@ -2715,10 +3044,10 @@ status = "disabled"; }; - sdhc2: sdhci@74a4900 { - compatible = "qcom,sdhci-msm-v4"; + sdhc2: mmc@74a4900 { + compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"; reg = <0x074a4900 0x314>, <0x074a4000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; @@ -2727,7 +3056,8 @@ clock-names = "iface", "core", "xo"; clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, - <&xo_board>; + <&rpmcc RPM_SMD_BB_CLK1>; + resets = <&gcc GCC_SDCC2_BCR>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdc2_state_on>; @@ -2784,9 +3114,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x07577000 0x1000>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp1_i2c3_default>; pinctrl-1 = <&blsp1_i2c3_sleep>; @@ -2832,9 +3162,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x075b5000 0x1000>; interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp2_i2c1_default>; pinctrl-1 = <&blsp2_i2c1_sleep>; @@ -2849,9 +3179,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x075b6000 0x1000>; interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp2_i2c2_default>; pinctrl-1 = <&blsp2_i2c2_sleep>; @@ -2866,9 +3196,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x075b7000 0x1000>; interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp2_i2c3_default>; @@ -2884,9 +3214,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x75b9000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp2_i2c5_default>; dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; @@ -2900,9 +3230,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x75ba000 0x1000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp2_i2c6_default>; pinctrl-1 = <&blsp2_i2c6_sleep>; @@ -2942,6 +3272,11 @@ <&gcc GCC_USB20_MOCK_UTMI_CLK>, <&gcc GCC_USB20_SLEEP_CLK>, <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, <&gcc GCC_USB20_MASTER_CLK>; @@ -2951,7 +3286,7 @@ qcom,select-utmi-as-pipe-clk; status = "disabled"; - dwc3@7600000 { + usb2_dwc3: usb@7600000 { compatible = "snps,dwc3"; reg = <0x07600000 0xcc00>; interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>; @@ -2967,7 +3302,7 @@ compatible = "qcom,bam-v1.7.0"; qcom,controlled-remotely; reg = <0x09184000 0x32000>; - num-channels = <31>; + num-channels = <31>; interrupts = <0 164 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; qcom,ee = <1>; @@ -2979,7 +3314,7 @@ reg = <0x091c0000 0x2C000>; reg-names = "ctrl"; interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&slimbam 3>, <&slimbam 4>, + dmas = <&slimbam 3>, <&slimbam 4>, <&slimbam 5>, <&slimbam 6>; dma-names = "rx", "tx", "tx2", "rx2"; #address-cells = <1>; @@ -2991,7 +3326,7 @@ tasha_ifd: tas-ifd { compatible = "slim217,1a0"; - reg = <0 0>; + reg = <0 0>; }; wcd9335: codec@1{ @@ -2999,17 +3334,17 @@ pinctrl-names = "default"; compatible = "slim217,1a0"; - reg = <1 0>; + reg = <1 0>; interrupt-parent = <&tlmm>; interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, <53 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "intr1", "intr2"; + interrupt-names = "intr1", "intr2"; interrupt-controller; #interrupt-cells = <1>; - reset-gpios = <&tlmm 64 0>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; - slim-ifc-dev = <&tasha_ifd>; + slim-ifc-dev = <&tasha_ifd>; #sound-dai-cells = <1>; }; @@ -3021,19 +3356,19 @@ reg = <0x09300000 0x80000>; interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; - clocks = <&xo_board>; + clocks = <&rpmcc RPM_SMD_BB_CLK1>; clock-names = "xo"; - memory-region = <&adsp_region>; + memory-region = <&adsp_mem>; - qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-states = <&adsp_smp2p_out 0>; qcom,smem-state-names = "stop"; power-domains = <&rpmpd MSM8996_VDDCX>; @@ -3054,7 +3389,7 @@ power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>; compatible = "qcom,apr-v2"; qcom,smd-channels = "apr_audio_svc"; - qcom,apr-domain = <APR_DOMAIN_ADSP>; + qcom,domain = <APR_DOMAIN_ADSP>; #address-cells = <1>; #size-cells = <0>; @@ -3169,7 +3504,7 @@ }; saw3: syscon@9a10000 { - compatible = "syscon"; + compatible = "qcom,tcsr-msm8996", "syscon"; reg = <0x09a10000 0x1000>; }; @@ -3273,7 +3608,7 @@ }; }; - gpu-thermal-top { + gpu-top-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -3295,7 +3630,7 @@ }; }; - gpu-thermal-bottom { + gpu-bottom-thermal { polling-delay-passive = <250>; polling-delay = <1000>; |