diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/pm660.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/pm660.dtsi | 194 |
1 files changed, 194 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi new file mode 100644 index 000000000000..e1622b16c08b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm660.dtsi @@ -0,0 +1,194 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + thermal-zones { + pm660 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&pm660_temp>; + + trips { + pm660_alert0: pm660-alert0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + pm660_crit: pm660-crit { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + + pmic@0 { + compatible = "qcom,pm660", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pon: pon@800 { + compatible = "qcom,pm8998-pon"; + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pon_pwrkey: pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + + status = "disabled"; + }; + + pon_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + + status = "disabled"; + }; + }; + + pm660_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm660_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm660_adc: adc@3100 { + compatible = "qcom,spmi-adc-rev2"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + ref_gnd: ref_gnd@0 { + reg = <ADC5_REF_GND>; + qcom,decimation = <1024>; + qcom,pre-scaling = <1 1>; + }; + + vref_1p25: vref_1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,decimation = <1024>; + qcom,pre-scaling = <1 1>; + }; + + die_temp: die_temp@6 { + reg = <ADC5_DIE_TEMP>; + qcom,decimation = <1024>; + qcom,pre-scaling = <1 1>; + }; + + xo_therm: xo_therm@4c { + reg = <ADC5_XO_THERM_100K_PU>; + qcom,pre-scaling = <1 1>; + qcom,decimation = <1024>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + }; + + msm_therm: msm_therm@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,pre-scaling = <1 1>; + qcom,decimation = <1024>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + }; + + emmc_therm: emmc_therm@4e { + reg = <ADC5_AMUX_THM2_100K_PU>; + qcom,pre-scaling = <1 1>; + qcom,decimation = <1024>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + }; + + pa_therm0: thermistor0@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,pre-scaling = <1 1>; + qcom,decimation = <1024>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + }; + + pa_therm1: thermistor1@50 { + reg = <ADC5_AMUX_THM4_100K_PU>; + qcom,pre-scaling = <1 1>; + qcom,decimation = <1024>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + }; + + quiet_therm: quiet_therm@51 { + reg = <ADC5_AMUX_THM5_100K_PU>; + qcom,pre-scaling = <1 1>; + qcom,decimation = <1024>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + }; + + vadc_vph_pwr: vph_pwr@83 { + reg = <ADC5_VPH_PWR>; + qcom,decimation = <1024>; + qcom,pre-scaling = <1 3>; + }; + + vcoin: vcoin@83 { + reg = <ADC5_VCOIN>; + qcom,decimation = <1024>; + qcom,pre-scaling = <1 3>; + }; + }; + + pm660_gpios: gpios@c000 { + compatible = "qcom,pm660-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm660_gpios 0 0 13>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@1 { + compatible = "qcom,pm660", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm660_spmi_regulators: regulators { + compatible = "qcom,pm660-regulators"; + }; + }; +}; |