diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/pm8150b.dtsi')
-rw-r--r-- | arch/arm64/boot/dts/qcom/pm8150b.dtsi | 89 |
1 files changed, 72 insertions, 17 deletions
diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi index 322379d5c31f..cdded791d96e 100644 --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi @@ -8,6 +8,37 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> +/ { + thermal-zones { + pm8150b-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8150b_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + &spmi_bus { pmic@2 { compatible = "qcom,pm8150b", "qcom,spmi-pmic"; @@ -15,14 +46,29 @@ #address-cells = <1>; #size-cells = <0>; - power-on@800 { + pon@800 { compatible = "qcom,pm8916-pon"; reg = <0x0800>; status = "disabled"; }; - adc@3100 { + pm8150b_vbus: dcdc@1100 { + compatible = "qcom,pm8150b-vbus-reg"; + status = "disabled"; + reg = <0x1100>; + }; + + pm8150b_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pm8150b_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm8150b_adc: adc@3100 { compatible = "qcom,spmi-adc5"; reg = <0x3100>; #address-cells = <1>; @@ -30,8 +76,6 @@ #io-channel-cells = <1>; interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - ref-gnd@0 { reg = <ADC5_REF_GND>; qcom,pre-scaling = <1 1>; @@ -57,23 +101,24 @@ }; }; + pm8150b_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + pm8150b_gpios: gpio@c000 { - compatible = "qcom,pm8150b-gpio"; + compatible = "qcom,pm8150b-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8150b_gpios 0 0 12>; #gpio-cells = <2>; - interrupts = <0x2 0xc0 0x0 IRQ_TYPE_NONE>, - <0x2 0xc1 0x0 IRQ_TYPE_NONE>, - <0x2 0xc2 0x0 IRQ_TYPE_NONE>, - <0x2 0xc3 0x0 IRQ_TYPE_NONE>, - <0x2 0xc4 0x0 IRQ_TYPE_NONE>, - <0x2 0xc5 0x0 IRQ_TYPE_NONE>, - <0x2 0xc6 0x0 IRQ_TYPE_NONE>, - <0x2 0xc7 0x0 IRQ_TYPE_NONE>, - <0x2 0xc8 0x0 IRQ_TYPE_NONE>, - <0x2 0xc9 0x0 IRQ_TYPE_NONE>, - <0x2 0xca 0x0 IRQ_TYPE_NONE>, - <0x2 0xcb 0x0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; }; @@ -82,5 +127,15 @@ reg = <0x3 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + pm8150b_lpg: pwm { + compatible = "qcom,pm8150b-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; }; }; |