aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sc7280-idp.dtsi')
-rw-r--r--arch/arm64/boot/dts/qcom/sc7280-idp.dtsi518
1 files changed, 386 insertions, 132 deletions
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index d623d71d8bd4..cd432a2856a7 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -5,7 +5,6 @@
* Copyright (c) 2021, The Linux Foundation. All rights reserved.
*/
-#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
#include <dt-bindings/input/linux-event-codes.h>
#include "sc7280.dtsi"
@@ -13,7 +12,50 @@
#include "pm8350c.dtsi"
#include "pmk8350.dtsi"
+#include "sc7280-chrome-common.dtsi"
+
/ {
+ aliases {
+ bluetooth0 = &bluetooth;
+ serial1 = &uart7;
+ };
+
+ max98360a: audio-codec-0 {
+ compatible = "maxim,max98360a";
+ pinctrl-names = "default";
+ pinctrl-0 = <&amp_en>;
+ sdmode-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
+ #sound-dai-cells = <0>;
+ };
+
+ wcd9385: audio-codec-1 {
+ compatible = "qcom,wcd9385-codec";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&wcd_reset_n>;
+ pinctrl-1 = <&wcd_reset_n_sleep>;
+
+ reset-gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>;
+
+ qcom,rx-device = <&wcd_rx>;
+ qcom,tx-device = <&wcd_tx>;
+
+ vdd-rxtx-supply = <&vreg_l18b_1p8>;
+ vdd-io-supply = <&vreg_l18b_1p8>;
+ vdd-buck-supply = <&vreg_l17b_1p8>;
+ vdd-mic-bias-supply = <&vreg_bob>;
+
+ qcom,micbias1-microvolt = <1800000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <1800000>;
+ qcom,micbias4-microvolt = <1800000>;
+
+ qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000
+ 500000 500000 500000>;
+ qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+ qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+ #sound-dai-cells = <1>;
+ };
+
gpio-keys {
compatible = "gpio-keys";
label = "gpio-keys";
@@ -21,7 +63,7 @@
pinctrl-names = "default";
pinctrl-0 = <&key_vol_up_default>;
- volume-up {
+ key-volume-up {
label = "volume_up";
gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
@@ -43,56 +85,102 @@
pinctrl-names = "default";
pinctrl-0 = <&nvme_pwren>;
};
-};
-/*
- * Reserved memory changes
- *
- * Delete all unused memory nodes and define the peripheral memory regions
- * required by the board dts.
- *
- */
+ sound: sound {
+ compatible = "google,sc7280-herobrine";
+ model = "sc7280-wcd938x-max98360a-1mic";
-/delete-node/ &hyp_mem;
-/delete-node/ &xbl_mem;
-/delete-node/ &reserved_xbl_uefi_log;
-/delete-node/ &sec_apps_mem;
+ audio-routing =
+ "IN1_HPHL", "HPHL_OUT",
+ "IN2_HPHR", "HPHR_OUT",
+ "AMIC1", "MIC BIAS1",
+ "AMIC2", "MIC BIAS2",
+ "VA DMIC0", "MIC BIAS3",
+ "VA DMIC1", "MIC BIAS3",
+ "VA DMIC2", "MIC BIAS1",
+ "VA DMIC3", "MIC BIAS1",
+ "TX SWR_ADC0", "ADC1_OUTPUT",
+ "TX SWR_ADC1", "ADC2_OUTPUT",
+ "TX SWR_ADC2", "ADC3_OUTPUT",
+ "TX SWR_DMIC0", "DMIC1_OUTPUT",
+ "TX SWR_DMIC1", "DMIC2_OUTPUT",
+ "TX SWR_DMIC2", "DMIC3_OUTPUT",
+ "TX SWR_DMIC3", "DMIC4_OUTPUT",
+ "TX SWR_DMIC4", "DMIC5_OUTPUT",
+ "TX SWR_DMIC5", "DMIC6_OUTPUT",
+ "TX SWR_DMIC6", "DMIC7_OUTPUT",
+ "TX SWR_DMIC7", "DMIC8_OUTPUT";
-/* Increase the size from 2.5MB to 8MB */
-&rmtfs_mem {
- reg = <0x0 0x9c900000 0x0 0x800000>;
-};
+ qcom,msm-mbhc-hphl-swh = <1>;
+ qcom,msm-mbhc-gnd-swh = <1>;
-/ {
- reserved-memory {
- adsp_mem: memory@86700000 {
- reg = <0x0 0x86700000 0x0 0x2800000>;
- no-map;
- };
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <0>;
- camera_mem: memory@8ad00000 {
- reg = <0x0 0x8ad00000 0x0 0x500000>;
- no-map;
+ dai-link@0 {
+ link-name = "MAX98360A";
+ reg = <0>;
+
+ cpu {
+ sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+ };
+
+ codec {
+ sound-dai = <&max98360a>;
+ };
};
- venus_mem: memory@8b200000 {
- reg = <0x0 0x8b200000 0x0 0x500000>;
- no-map;
+ dai-link@1 {
+ link-name = "DisplayPort";
+ reg = <1>;
+
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_DP_RX>;
+ };
+
+ codec {
+ sound-dai = <&mdss_dp>;
+ };
};
- mpss_mem: memory@8b800000 {
- reg = <0x0 0x8b800000 0x0 0xf600000>;
- no-map;
+ dai-link@2 {
+ link-name = "WCD9385 Playback";
+ reg = <2>;
+
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>;
+ };
+
+ codec {
+ sound-dai = <&wcd9385 0>, <&swr0 0>, <&lpass_rx_macro 0>;
+ };
};
- wpss_mem: memory@9ae00000 {
- reg = <0x0 0x9ae00000 0x0 0x1900000>;
- no-map;
+ dai-link@3 {
+ link-name = "WCD9385 Capture";
+ reg = <3>;
+
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>;
+ };
+
+ codec {
+ sound-dai = <&wcd9385 1>, <&swr1 0>, <&lpass_tx_macro 0>;
+ };
};
- mba_mem: memory@9c700000 {
- reg = <0x0 0x9c700000 0x0 0x200000>;
- no-map;
+ dai-link@4 {
+ link-name = "DMIC";
+ reg = <4>;
+
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>;
+ };
+
+ codec {
+ sound-dai = <&lpass_va_macro 0>;
+ };
};
};
};
@@ -279,14 +367,63 @@
};
};
+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
&ipa {
status = "okay";
modem-init;
};
+&lpass_cpu {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>;
+
+ dai-link@1 {
+ reg = <MI2S_SECONDARY>;
+ qcom,playback-sd-lines = <0>;
+ };
+
+ dai-link@5 {
+ reg = <LPASS_DP_RX>;
+ };
+
+ dai-link@6 {
+ reg = <LPASS_CDC_DMA_RX0>;
+ };
+
+ dai-link@19 {
+ reg = <LPASS_CDC_DMA_TX3>;
+ };
+
+ dai-link@25 {
+ reg = <LPASS_CDC_DMA_VA_TX0>;
+ };
+};
+
+&lpass_rx_macro {
+ status = "okay";
+};
+
+&lpass_tx_macro {
+ status = "okay";
+};
+
+&lpass_va_macro {
+ status = "okay";
+ vdd-micb-supply = <&vreg_bob>;
+};
+
&pcie1 {
status = "okay";
- perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>;
+ perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
vddpe-3v3-supply = <&nvme_3v3_regulator>;
@@ -302,7 +439,7 @@
};
&pmk8350_vadc {
- pmk8350_die_temp {
+ pmk8350-die-temp@3 {
reg = <PMK8350_ADC7_DIE_TEMP>;
label = "pmk8350_die_temp";
qcom,pre-scaling = <1 1>;
@@ -313,20 +450,6 @@
vcc-supply = <&vreg_l1c_1p8>;
};
-&qspi {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <37500000>;
- spi-tx-bus-width = <2>;
- spi-rx-bus-width = <2>;
- };
-};
-
&qupv3_id_0 {
status = "okay";
};
@@ -335,20 +458,9 @@
status = "okay";
};
-&remoteproc_mpss {
- status = "okay";
- compatible = "qcom,sc7280-mss-pil";
- iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
- memory-region = <&mba_mem &mpss_mem>;
-};
-
&sdhc_1 {
status = "okay";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc1_on>;
- pinctrl-1 = <&sdc1_off>;
-
non-removable;
no-sd;
no-sdio;
@@ -360,9 +472,8 @@
&sdhc_2 {
status = "okay";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_on>;
- pinctrl-1 = <&sdc2_off>;
+ pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>;
+ pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>;
vmmc-supply = <&vreg_l9c_2p9>;
vqmmc-supply = <&vreg_l6c_2p9>;
@@ -370,6 +481,28 @@
cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
};
+&swr0 {
+ status = "okay";
+
+ wcd_rx: codec@0,4 {
+ compatible = "sdw20217010d00";
+ reg = <0 4>;
+ #sound-dai-cells = <1>;
+ qcom,rx-port-mapping = <1 2 3 4 5>;
+ };
+};
+
+&swr1 {
+ status = "okay";
+
+ wcd_tx: codec@0,3 {
+ compatible = "sdw20217010d00";
+ reg = <0 3>;
+ #sound-dai-cells = <1>;
+ qcom,tx-port-mapping = <1 2 3 4>;
+ };
+};
+
&uart5 {
compatible = "qcom,geni-debug-uart";
status = "okay";
@@ -398,22 +531,6 @@
vdda-pll-supply = <&vreg_l1b_0p8>;
};
-&usb_2 {
- status = "okay";
-};
-
-&usb_2_dwc3 {
- dr_mode = "peripheral";
-};
-
-&usb_2_hsphy {
- status = "okay";
-
- vdda-pll-supply = <&vreg_l10c_0p8>;
- vdda33-supply = <&vreg_l2b_3p0>;
- vdda18-supply = <&vreg_l1c_1p8>;
-};
-
&uart7 {
status = "okay";
@@ -422,12 +539,109 @@
<&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default", "sleep";
pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>;
+
+ bluetooth: bluetooth {
+ compatible = "qcom,wcn6750-bt";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_en>, <&sw_ctrl>;
+ enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+ swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+ vddaon-supply = <&vreg_s7b_0p9>;
+ vddbtcxmx-supply = <&vreg_s7b_0p9>;
+ vddrfacmn-supply = <&vreg_s7b_0p9>;
+ vddrfa0p8-supply = <&vreg_s7b_0p9>;
+ vddrfa1p7-supply = <&vreg_s1b_1p8>;
+ vddrfa1p2-supply = <&vreg_s8b_1p2>;
+ vddrfa2p2-supply = <&vreg_s1c_2p2>;
+ vddasd-supply = <&vreg_l11c_2p8>;
+ max-speed = <3200000>;
+ };
};
/* PINCTRL - additions to nodes defined in sc7280.dtsi */
+&dp_hot_plug_det {
+ bias-disable;
+};
+
+&lpass_dmic01_clk {
+ drive-strength = <8>;
+ bias-disable;
+};
+
+&lpass_dmic01_clk_sleep {
+ drive-strength = <2>;
+};
+
+&lpass_dmic01_data {
+ bias-pull-down;
+};
+
+&lpass_dmic23_clk {
+ drive-strength = <8>;
+ bias-disable;
+};
+
+&lpass_dmic23_clk_sleep {
+ drive-strength = <2>;
+};
+
+&lpass_dmic23_data {
+ bias-pull-down;
+};
+
+&lpass_rx_swr_clk {
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-disable;
+};
+
+&lpass_rx_swr_clk_sleep {
+ bias-pull-down;
+};
+
+&lpass_rx_swr_data {
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-bus-hold;
+};
+
+&lpass_rx_swr_data_sleep {
+ bias-pull-down;
+};
+
+&lpass_tx_swr_clk {
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-disable;
+};
+
+&lpass_tx_swr_clk_sleep {
+ bias-pull-down;
+};
+
+&lpass_tx_swr_data {
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-bus-hold;
+};
+
+&mi2s1_data0 {
+ drive-strength = <6>;
+ bias-disable;
+};
+
+&mi2s1_sclk {
+ drive-strength = <6>;
+ bias-disable;
+};
+
+&mi2s1_ws {
+ drive-strength = <6>;
+};
+
&pm7325_gpios {
- key_vol_up_default: key-vol-up-default {
+ key_vol_up_default: key-vol-up-state {
pins = "gpio6";
function = "normal";
input-enable;
@@ -437,6 +651,11 @@
};
};
+&pcie1_clkreq_n {
+ bias-pull-up;
+ drive-strength = <2>;
+};
+
&qspi_cs0 {
bias-disable;
};
@@ -462,10 +681,13 @@
&qup_uart7_cts {
/*
- * Configure a pull-down on CTS to match the pull of
- * the Bluetooth module.
+ * Configure a bias-bus-hold on CTS to lower power
+ * usage when Bluetooth is turned off. Bus hold will
+ * maintain a low power state regardless of whether
+ * the Bluetooth module drives the pin in either
+ * direction or leaves the pin fully unpowered.
*/
- bias-pull-down;
+ bias-bus-hold;
};
&qup_uart7_rts {
@@ -490,12 +712,59 @@
bias-pull-up;
};
+&sdc1_clk {
+ bias-disable;
+ drive-strength = <16>;
+};
+
+&sdc1_cmd {
+ bias-pull-up;
+ drive-strength = <10>;
+};
+
+&sdc1_data {
+ bias-pull-up;
+ drive-strength = <10>;
+};
+
+&sdc1_rclk {
+ bias-pull-down;
+};
+
+&sdc2_clk {
+ bias-disable;
+ drive-strength = <16>;
+};
+
+&sdc2_cmd {
+ bias-pull-up;
+ drive-strength = <10>;
+};
+
+&sdc2_data {
+ bias-pull-up;
+ drive-strength = <10>;
+};
+
&tlmm {
- nvme_pwren: nvme-pwren {
+ amp_en: amp-en {
+ pins = "gpio63";
+ bias-pull-down;
+ drive-strength = <2>;
+ };
+
+ bt_en: bt-en-pins {
+ pins = "gpio85";
+ function = "gpio";
+ output-low;
+ bias-disable;
+ };
+
+ nvme_pwren: nvme-pwren-pins {
function = "gpio";
};
- pcie1_reset_n: pcie1-reset-n {
+ pcie1_reset_n: pcie1-reset-n-pins {
pins = "gpio2";
function = "gpio";
@@ -504,7 +773,7 @@
bias-disable;
};
- pcie1_wake_n: pcie1-wake-n {
+ pcie1_wake_n: pcie1-wake-n-pins {
pins = "gpio3";
function = "gpio";
@@ -512,17 +781,20 @@
bias-pull-up;
};
- qup_uart7_sleep_cts: qup-uart7-sleep-cts {
+ qup_uart7_sleep_cts: qup-uart7-sleep-cts-pins {
pins = "gpio28";
function = "gpio";
/*
- * Configure a pull-down on CTS to match the pull of
- * the Bluetooth module.
+ * Configure a bias-bus-hold on CTS to lower power
+ * usage when Bluetooth is turned off. Bus hold will
+ * maintain a low power state regardless of whether
+ * the Bluetooth module drives the pin in either
+ * direction or leaves the pin fully unpowered.
*/
- bias-pull-down;
+ bias-bus-hold;
};
- qup_uart7_sleep_rts: qup-uart7-sleep-rts {
+ qup_uart7_sleep_rts: qup-uart7-sleep-rts-pins {
pins = "gpio29";
function = "gpio";
/*
@@ -534,7 +806,7 @@
bias-pull-down;
};
- qup_uart7_sleep_tx: qup-uart7-sleep-tx {
+ qup_uart7_sleep_tx: qup-uart7-sleep-tx-pins {
pins = "gpio30";
function = "gpio";
/*
@@ -544,7 +816,7 @@
bias-pull-up;
};
- qup_uart7_sleep_rx: qup-uart7-sleep-rx {
+ qup_uart7_sleep_rx: qup-uart7-sleep-rx-pins {
pins = "gpio31";
function = "gpio";
/*
@@ -554,47 +826,29 @@
*/
bias-pull-up;
};
-};
-&sdc1_on {
- clk {
- bias-disable;
- drive-strength = <16>;
- };
-
- cmd {
- bias-pull-up;
- drive-strength = <10>;
- };
-
- data {
+ sd_cd: sd-cd-pins {
+ pins = "gpio91";
+ function = "gpio";
bias-pull-up;
- drive-strength = <10>;
};
- rclk {
+ sw_ctrl: sw-ctrl-pins {
+ pins = "gpio86";
+ function = "gpio";
bias-pull-down;
};
-};
-
-&sdc2_on {
- clk {
- bias-disable;
- drive-strength = <16>;
- };
-
- cmd {
- bias-pull-up;
- drive-strength = <10>;
- };
- data {
- bias-pull-up;
- drive-strength = <10>;
+ wcd_reset_n: wcd-reset-n {
+ pins = "gpio83";
+ function = "gpio";
+ drive-strength = <8>;
};
- sd-cd {
- pins = "gpio91";
- bias-pull-up;
+ wcd_reset_n_sleep: wcd-reset-n-sleep {
+ pins = "gpio83";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
};
};
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.