diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 485 |
1 files changed, 485 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts new file mode 100644 index 000000000000..30c94fd4fe61 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -0,0 +1,485 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm7225.dtsi" +#include "pm6150l.dtsi" +#include "pm6350.dtsi" +#include "pm7250b.dtsi" + +/ { + model = "Fairphone 4"; + compatible = "fairphone,fp4", "qcom,sm7225"; + chassis-type = "handset"; + + /* required for bootloader to select correct board */ + qcom,msm-id = <434 0x10000>, <459 0x10000>; + qcom,board-id = <8 32>; + + aliases { + serial0 = &uart9; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "serial0:115200n8"; + + framebuffer0: framebuffer@a000000 { + compatible = "simple-framebuffer"; + reg = <0 0xa0000000 0 (2340 * 1080 * 4)>; + width = <1080>; + height = <2340>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin>; + + key-volume-up { + label = "volume_up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm6350_gpios 2 GPIO_ACTIVE_LOW>; + }; + }; + + reserved-memory { + /* + * The rmtfs memory region in downstream is 'dynamically allocated' + * but given the same address every time. Hard code it as this address is + * where the modem firmware expects it to be. + */ + memory@efe01000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xefe01000 0 0x600000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + }; + + thermal-zones { + chg-skin-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm7250b_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + conn-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm7250b_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + }; +}; + +&adsp { + status = "okay"; + firmware-name = "qcom/sm7225/fairphone4/adsp.mdt"; +}; + +&apps_rsc { + pm6350-rpmh-regulators { + compatible = "qcom,pm6350-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_s1a: smps1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_s2a: smps2 { + regulator-min-microvolt = <1503000>; + regulator-max-microvolt = <2048000>; + }; + + vreg_l2a: ldo2 { + regulator-min-microvolt = <1503000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3a: ldo3 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4a: ldo4 { + regulator-min-microvolt = <352000>; + regulator-max-microvolt = <801000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5a: ldo5 { + regulator-min-microvolt = <1503000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a: ldo6 { + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a: ldo7 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a: ldo8 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a: ldo9 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3401000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11a: ldo11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a: ldo12 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a: ldo13 { + regulator-min-microvolt = <570000>; + regulator-max-microvolt = <650000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a: ldo14 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a: ldo15 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1305000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a: ldo16 { + regulator-min-microvolt = <830000>; + regulator-max-microvolt = <921000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a: ldo18 { + regulator-min-microvolt = <788000>; + regulator-max-microvolt = <1049000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19a: ldo19 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1305000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a: ldo20 { + regulator-min-microvolt = <530000>; + regulator-max-microvolt = <801000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21a: ldo21 { + regulator-min-microvolt = <751000>; + regulator-max-microvolt = <825000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l22a: ldo22 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1305000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm6150l-rpmh-regulators { + compatible = "qcom,pm6150l-rpmh-regulators"; + qcom,pmic-id = "e"; + + vreg_s8e: smps8 { + regulator-min-microvolt = <313000>; + regulator-max-microvolt = <1395000>; + }; + + vreg_l1e: ldo1 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2e: ldo2 { + regulator-min-microvolt = <1170000>; + regulator-max-microvolt = <1305000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e: ldo3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1299000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4e: ldo4 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5e: ldo5 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6e: ldo6 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7e: ldo7 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8e: ldo8 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9e: ldo9 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10e: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3401000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11e: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3401000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <5492000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-bypass; + }; + }; +}; + +&cdsp { + status = "okay"; + firmware-name = "qcom/sm7225/fairphone4/cdsp.mdt"; +}; + +&i2c10 { + status = "okay"; + clock-frequency = <400000>; + + haptics@5a { + compatible = "awinic,aw8695"; + reg = <0x5a>; + interrupts-extended = <&tlmm 85 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 90 GPIO_ACTIVE_HIGH>; + + awinic,f0-preset = <2350>; + awinic,f0-coefficient = <260>; + awinic,f0-calibration-percent = <7>; + awinic,drive-level = <125>; + + awinic,f0-detection-play-time = <5>; + awinic,f0-detection-wait-time = <3>; + awinic,f0-detection-repeat = <2>; + awinic,f0-detection-trace = <15>; + + awinic,boost-debug = /bits/ 8 <0x30 0xeb 0xd4>; + awinic,tset = /bits/ 8 <0x12>; + awinic,r-spare = /bits/ 8 <0x68>; + + awinic,bemf-upper-threshold = <4104>; + awinic,bemf-lower-threshold = <1016>; + }; +}; + +&mpss { + status = "okay"; + firmware-name = "qcom/sm7225/fairphone4/modem.mdt"; +}; + +&pm6150l_wled { + status = "okay"; + + qcom,switching-freq = <800>; + qcom,current-limit-microamp = <20000>; + qcom,num-strings = <2>; +}; + +&pm6350_gpios { + gpio_keys_pin: gpio-keys-state { + pins = "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-pull-up; + input-enable; + power-source = <0>; + }; +}; + +&pm6350_resin { + status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; +}; + +&pm7250b_adc { + adc-chan@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "charger_skin_therm"; + }; + + adc-chan@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "conn_therm"; + }; +}; + +&pm7250b_adc_tm { + status = "okay"; + + charger-skin-therm@0 { + reg = <0>; + io-channels = <&pm7250b_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + conn-therm@1 { + reg = <1>; + io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <13 4>, <56 2>; +}; + +&uart9 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 156 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7e>; + vcc-max-microamp = <800000>; + vccq2-supply = <&vreg_l12a>; + vccq2-max-microamp = <800000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l18a>; + vdda-pll-supply = <&vreg_l22a>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + maximum-speed = "super-speed"; + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vreg_l18a>; + vdda-pll-supply = <&vreg_l2a>; + vdda-phy-dpdm-supply = <&vreg_l3a>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l22a>; + vdda-pll-supply = <&vreg_l16a>; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l4a>; + vdd-1.8-xo-supply = <&vreg_l7a>; + vdd-1.3-rfa-supply = <&vreg_l2e>; + vdd-3.3-ch0-supply = <&vreg_l10e>; + vdd-3.3-ch1-supply = <&vreg_l11e>; +}; |