diff options
Diffstat (limited to 'arch/arm64/boot/dts/ti/k3-am642-evm.dts')
| -rw-r--r-- | arch/arm64/boot/dts/ti/k3-am642-evm.dts | 54 |
1 files changed, 50 insertions, 4 deletions
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts index 6726c4c7c28c..5cf913860f80 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts @@ -13,7 +13,7 @@ #include "k3-am642.dtsi" / { - compatible = "ti,am642-evm", "ti,am642"; + compatible = "ti,am642-evm", "ti,am642"; model = "Texas Instruments AM642 EVM"; chosen { @@ -184,6 +184,20 @@ }; }; }; + + transceiver1: can-phy0 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + standby-gpios = <&exp1 8 GPIO_ACTIVE_HIGH>; + }; + + transceiver2: can-phy1 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + standby-gpios = <&exp1 9 GPIO_ACTIVE_HIGH>; + }; }; &main_pmx0 { @@ -294,6 +308,20 @@ AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */ >; }; + + main_mcan0_pins_default: main-mcan0-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0254, PIN_INPUT, 0) /* (B17) MCAN0_RX */ + AM64X_IOPAD(0x0250, PIN_OUTPUT, 0) /* (A17) MCAN0_TX */ + >; + }; + + main_mcan1_pins_default: main-mcan1-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x025c, PIN_INPUT, 0) /* (D17) MCAN1_RX */ + AM64X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (C17) MCAN1_TX */ + >; + }; }; &main_uart0 { @@ -470,7 +498,7 @@ pinctrl-names = "default"; pinctrl-0 = <&ospi0_pins_default>; - flash@0{ + flash@0 { compatible = "jedec,spi-nor"; reg = <0x0>; spi-tx-bus-width = <8>; @@ -481,8 +509,6 @@ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <4>; - #address-cells = <1>; - #size-cells = <1>; }; }; @@ -638,3 +664,23 @@ &icssg1_mdio { status = "disabled"; }; + +&main_mcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan0_pins_default>; + phys = <&transceiver1>; +}; + +&main_mcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan1_pins_default>; + phys = <&transceiver2>; +}; + +&gpmc0 { + status = "disabled"; +}; + +&elm0 { + status = "disabled"; +}; |