diff options
Diffstat (limited to 'arch/arm64/boot/dts/ti/k3-am642-sk.dts')
| -rw-r--r-- | arch/arm64/boot/dts/ti/k3-am642-sk.dts | 167 |
1 files changed, 163 insertions, 4 deletions
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts index a9785bec12df..738d0cf6c40a 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts @@ -9,10 +9,11 @@ #include <dt-bindings/phy/phy.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/net/ti-dp83867.h> +#include <dt-bindings/leds/common.h> #include "k3-am642.dtsi" / { - compatible = "ti,am642-sk", "ti,am642"; + compatible = "ti,am642-sk", "ti,am642"; model = "Texas Instruments AM642 SK"; chosen { @@ -125,6 +126,99 @@ vin-supply = <&vcc_3v3_sys>; gpio = <&exp1 3 GPIO_ACTIVE_HIGH>; }; + + com8_ls_en: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "com8_ls_en"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + pinctrl-0 = <&main_com8_ls_en_pins_default>; + pinctrl-names = "default"; + gpio = <&main_gpio0 62 GPIO_ACTIVE_LOW>; + }; + + wlan_en: regulator-2 { + /* output of SN74AVC4T245RSVR */ + compatible = "regulator-fixed"; + regulator-name = "wlan_en"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + pinctrl-0 = <&main_wlan_en_pins_default>; + pinctrl-names = "default"; + vin-supply = <&com8_ls_en>; + gpio = <&main_gpio0 48 GPIO_ACTIVE_HIGH>; + }; + + led-controller { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + gpios = <&exp2 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-1 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + gpios = <&exp2 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-2 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <3>; + gpios = <&exp2 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-3 { + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <4>; + gpios = <&exp2 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-4 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <5>; + gpios = <&exp2 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-5 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <6>; + gpios = <&exp2 5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-6 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <7>; + gpios = <&exp2 6 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-7 { + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <8>; + linux,default-trigger = "heartbeat"; + gpios = <&exp2 7 GPIO_ACTIVE_HIGH>; + }; + }; }; &main_pmx0 { @@ -141,6 +235,15 @@ >; }; + main_uart0_pins_default: main-uart0-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */ + AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */ + AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */ + AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */ + >; + }; + main_usb0_pins_default: main-usb0-pins-default { pinctrl-single,pins = < AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ @@ -216,6 +319,23 @@ AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */ >; }; + main_wlan_en_pins_default: main-wlan-en-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x00c4, PIN_OUTPUT_PULLUP, 7) /* (V8) GPIO0_48 */ + >; + }; + + main_com8_ls_en_pins_default: main-com8-ls-en-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x00fc, PIN_OUTPUT, 7) /* (U7) PRG1_PRU0_GPO17.GPIO0_62 */ + >; + }; + + main_wlan_pins_default: main-wlan-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x00bc, PIN_INPUT, 7) /* (U8) GPIO0_46 */ + >; + }; }; &mcu_uart0 { @@ -226,6 +346,11 @@ status = "disabled"; }; +&main_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; +}; + &main_uart1 { /* main_uart1 is reserved for firmware usage */ status = "reserved"; @@ -274,6 +399,14 @@ "VPP_LDO_EN", "RPI_PS_3V3_En", "RPI_PS_5V0_En", "RPI_HAT_DETECT"; }; + + exp2: gpio@60 { + compatible = "ti,tpic2810"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "LED1","LED2","LED3","LED4","LED5","LED6","LED7","LED8"; + }; }; &main_i2c3 { @@ -293,6 +426,26 @@ status = "reserved"; }; +&sdhci0 { + vmmc-supply = <&wlan_en>; + bus-width = <4>; + non-removable; + cap-power-off-card; + keep-power-in-suspend; + ti,driver-strength-ohm = <50>; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; + pinctrl-0 = <&main_wlan_pins_default>; + pinctrl-names = "default"; + interrupt-parent = <&main_gpio0>; + interrupts = <46 IRQ_TYPE_EDGE_FALLING>; + }; +}; + &sdhci1 { /* SD/MMC */ vmmc-supply = <&vdd_mmc1>; @@ -369,7 +522,7 @@ pinctrl-names = "default"; pinctrl-0 = <&ospi0_pins_default>; - flash@0{ + flash@0 { compatible = "jedec,spi-nor"; reg = <0x0>; spi-tx-bus-width = <8>; @@ -380,8 +533,6 @@ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <4>; - #address-cells = <1>; - #size-cells = <1>; }; }; @@ -533,3 +684,11 @@ &main_mcan1 { status = "disabled"; }; + +&gpmc0 { + status = "disabled"; +}; + +&elm0 { + status = "disabled"; +}; |