diff options
Diffstat (limited to 'arch/arm64/include/asm/arch_gicv3.h')
| -rw-r--r-- | arch/arm64/include/asm/arch_gicv3.h | 108 |
1 files changed, 79 insertions, 29 deletions
diff --git a/arch/arm64/include/asm/arch_gicv3.h b/arch/arm64/include/asm/arch_gicv3.h index b7e3f74822da..48d4473e8eee 100644 --- a/arch/arm64/include/asm/arch_gicv3.h +++ b/arch/arm64/include/asm/arch_gicv3.h @@ -1,19 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm64/include/asm/arch_gicv3.h * * Copyright (C) 2015 ARM Ltd. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef __ASM_ARCH_GICV3_H #define __ASM_ARCH_GICV3_H @@ -22,6 +11,7 @@ #ifndef __ASSEMBLY__ +#include <linux/irqchip/arm-gic-common.h> #include <linux/stringify.h> #include <asm/barrier.h> #include <asm/cacheflush.h> @@ -36,13 +26,7 @@ * sets the GP register's most significant bits to 0 with an explicit cast. */ -static inline void gic_write_eoir(u32 irq) -{ - write_sysreg_s(irq, SYS_ICC_EOIR1_EL1); - isb(); -} - -static inline void gic_write_dir(u32 irq) +static __always_inline void gic_write_dir(u32 irq) { write_sysreg_s(irq, SYS_ICC_DIR_EL1); isb(); @@ -63,22 +47,36 @@ static inline u64 gic_read_iar_common(void) * The gicv3 of ThunderX requires a modified version for reading the * IAR status to ensure data synchronization (access to icc_iar1_el1 * is not sync'ed before and after). + * + * Erratum 38545 + * + * When a IAR register read races with a GIC interrupt RELEASE event, + * GIC-CPU interface could wrongly return a valid INTID to the CPU + * for an interrupt that is already released(non activated) instead of 0x3ff. + * + * To workaround this, return a valid interrupt ID only if there is a change + * in the active priority list after the IAR read. + * + * Common function used for both the workarounds since, + * 1. On Thunderx 88xx 1.x both erratas are applicable. + * 2. Having extra nops doesn't add any side effects for Silicons where + * erratum 23154 is not applicable. */ static inline u64 gic_read_iar_cavium_thunderx(void) { - u64 irqstat; + u64 irqstat, apr; + apr = read_sysreg_s(SYS_ICC_AP1R0_EL1); nops(8); irqstat = read_sysreg_s(SYS_ICC_IAR1_EL1); nops(4); mb(); - return irqstat; -} + /* Max priority groups implemented is only 32 */ + if (likely(apr != read_sysreg_s(SYS_ICC_AP1R0_EL1))) + return irqstat; -static inline void gic_write_pmr(u32 val) -{ - write_sysreg_s(val, SYS_ICC_PMR_EL1); + return 0x3ff; } static inline void gic_write_ctlr(u32 val) @@ -87,6 +85,11 @@ static inline void gic_write_ctlr(u32 val) isb(); } +static inline u32 gic_read_ctlr(void) +{ + return read_sysreg_s(SYS_ICC_CTLR_EL1); +} + static inline void gic_write_grpen1(u32 val) { write_sysreg_s(val, SYS_ICC_IGRPEN1_EL1); @@ -114,12 +117,28 @@ static inline void gic_write_bpr1(u32 val) write_sysreg_s(val, SYS_ICC_BPR1_EL1); } +static inline u32 gic_read_pmr(void) +{ + return read_sysreg_s(SYS_ICC_PMR_EL1); +} + +static __always_inline void gic_write_pmr(u32 val) +{ + write_sysreg_s(val, SYS_ICC_PMR_EL1); +} + +static inline u32 gic_read_rpr(void) +{ + return read_sysreg_s(SYS_ICC_RPR_EL1); +} + #define gic_read_typer(c) readq_relaxed(c) #define gic_write_irouter(v, c) writeq_relaxed(v, c) #define gic_read_lpir(c) readq_relaxed(c) #define gic_write_lpir(v, c) writeq_relaxed(v, c) -#define gic_flush_dcache_to_poc(a,l) __flush_dcache_area((a), (l)) +#define gic_flush_dcache_to_poc(a,l) \ + dcache_clean_inval_poc((unsigned long)(a), (unsigned long)(a)+(l)) #define gits_read_baser(c) readq_relaxed(c) #define gits_write_baser(v, c) writeq_relaxed(v, c) @@ -135,10 +154,41 @@ static inline void gic_write_bpr1(u32 val) #define gicr_write_pendbaser(v, c) writeq_relaxed(v, c) #define gicr_read_pendbaser(c) readq_relaxed(c) -#define gits_write_vpropbaser(v, c) writeq_relaxed(v, c) +#define gicr_write_vpropbaser(v, c) writeq_relaxed(v, c) +#define gicr_read_vpropbaser(c) readq_relaxed(c) -#define gits_write_vpendbaser(v, c) writeq_relaxed(v, c) -#define gits_read_vpendbaser(c) readq_relaxed(c) +#define gicr_write_vpendbaser(v, c) writeq_relaxed(v, c) +#define gicr_read_vpendbaser(c) readq_relaxed(c) + +static inline bool gic_prio_masking_enabled(void) +{ + return system_uses_irq_prio_masking(); +} + +static inline void gic_pmr_mask_irqs(void) +{ + BUILD_BUG_ON(GICD_INT_DEF_PRI < (__GIC_PRIO_IRQOFF | + GIC_PRIO_PSR_I_SET)); + BUILD_BUG_ON(GICD_INT_DEF_PRI >= GIC_PRIO_IRQON); + /* + * Need to make sure IRQON allows IRQs when SCR_EL3.FIQ is cleared + * and non-secure PMR accesses are not subject to the shifts that + * are applied to IRQ priorities + */ + BUILD_BUG_ON((0x80 | (GICD_INT_DEF_PRI >> 1)) >= GIC_PRIO_IRQON); + /* + * Same situation as above, but now we make sure that we can mask + * regular interrupts. + */ + BUILD_BUG_ON((0x80 | (GICD_INT_DEF_PRI >> 1)) < (__GIC_PRIO_IRQOFF_NS | + GIC_PRIO_PSR_I_SET)); + gic_write_pmr(GIC_PRIO_IRQOFF); +} + +static inline void gic_arch_enable_irqs(void) +{ + asm volatile ("msr daifclr, #3" : : : "memory"); +} #endif /* __ASSEMBLY__ */ #endif /* __ASM_ARCH_GICV3_H */ |