diff options
Diffstat (limited to 'arch/arm64/kernel/fpsimd.c')
| -rw-r--r-- | arch/arm64/kernel/fpsimd.c | 1863 |
1 files changed, 1737 insertions, 126 deletions
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c index 5d547deb6996..23834d96d1e7 100644 --- a/arch/arm64/kernel/fpsimd.c +++ b/arch/arm64/kernel/fpsimd.c @@ -1,35 +1,49 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * FP/SIMD context switching and fault handling * * Copyright (C) 2012 ARM Ltd. * Author: Catalin Marinas <catalin.marinas@arm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ +#include <linux/bitmap.h> +#include <linux/bitops.h> #include <linux/bottom_half.h> +#include <linux/bug.h> +#include <linux/cache.h> +#include <linux/compat.h> +#include <linux/compiler.h> #include <linux/cpu.h> #include <linux/cpu_pm.h> +#include <linux/ctype.h> #include <linux/kernel.h> +#include <linux/linkage.h> +#include <linux/irqflags.h> #include <linux/init.h> #include <linux/percpu.h> +#include <linux/prctl.h> #include <linux/preempt.h> +#include <linux/ptrace.h> #include <linux/sched/signal.h> +#include <linux/sched/task_stack.h> #include <linux/signal.h> +#include <linux/slab.h> +#include <linux/stddef.h> +#include <linux/sysctl.h> +#include <linux/swab.h> +#include <asm/esr.h> +#include <asm/exception.h> #include <asm/fpsimd.h> +#include <asm/cpufeature.h> #include <asm/cputype.h> +#include <asm/neon.h> +#include <asm/processor.h> #include <asm/simd.h> +#include <asm/sigcontext.h> +#include <asm/sysreg.h> +#include <asm/traps.h> +#include <asm/virt.h> #define FPEXC_IOF (1 << 0) #define FPEXC_DZF (1 << 1) @@ -39,6 +53,8 @@ #define FPEXC_IDF (1 << 7) /* + * (Note: in this discussion, statements about FPSIMD apply equally to SVE.) + * * In order to reduce the number of times the FPSIMD state is needlessly saved * and restored, we need to keep track of two things: * (a) for each task, we need to remember which CPU was the last one to have @@ -47,7 +63,7 @@ * been loaded into its FPSIMD registers most recently, or whether it has * been used to perform kernel mode NEON in the meantime. * - * For (a), we add a 'cpu' field to struct fpsimd_state, which gets updated to + * For (a), we add a fpsimd_cpu field to thread_struct, which gets updated to * the id of the current CPU every time the state is loaded onto a CPU. For (b), * we add the per-cpu variable 'fpsimd_last_state' (below), which contains the * address of the userland FPSIMD state of the task that was loaded onto the CPU @@ -56,31 +72,36 @@ * With this in place, we no longer have to restore the next FPSIMD state right * when switching between tasks. Instead, we can defer this check to userland * resume, at which time we verify whether the CPU's fpsimd_last_state and the - * task's fpsimd_state.cpu are still mutually in sync. If this is the case, we + * task's fpsimd_cpu are still mutually in sync. If this is the case, we * can omit the FPSIMD restore. * * As an optimization, we use the thread_info flag TIF_FOREIGN_FPSTATE to * indicate whether or not the userland FPSIMD state of the current task is * present in the registers. The flag is set unless the FPSIMD registers of this * CPU currently contain the most recent userland FPSIMD state of the current - * task. + * task. If the task is behaving as a VMM, then this is will be managed by + * KVM which will clear it to indicate that the vcpu FPSIMD state is currently + * loaded on the CPU, allowing the state to be saved if a FPSIMD-aware + * softirq kicks in. Upon vcpu_put(), KVM will save the vcpu FP state and + * flag the register state as invalid. * * In order to allow softirq handlers to use FPSIMD, kernel_neon_begin() may * save the task's FPSIMD context back to task_struct from softirq context. * To prevent this from racing with the manipulation of the task's FPSIMD state * from task context and thereby corrupting the state, it is necessary to * protect any manipulation of a task's fpsimd_state or TIF_FOREIGN_FPSTATE - * flag with local_bh_disable() unless softirqs are already masked. + * flag with {, __}get_cpu_fpsimd_context(). This will still allow softirqs to + * run but prevent them to use FPSIMD. * * For a certain task, the sequence may look something like this: - * - the task gets scheduled in; if both the task's fpsimd_state.cpu field + * - the task gets scheduled in; if both the task's fpsimd_cpu field * contains the id of the current CPU, and the CPU's fpsimd_last_state per-cpu * variable points to the task's fpsimd_state, the TIF_FOREIGN_FPSTATE flag is * cleared, otherwise it is set; * * - the task returns to userland; if TIF_FOREIGN_FPSTATE is set, the task's * userland FPSIMD state is copied from memory to the registers, the task's - * fpsimd_state.cpu field is set to the id of the current CPU, the current + * fpsimd_cpu field is set to the id of the current CPU, the current * CPU's fpsimd_last_state pointer is set to this task's fpsimd_state and the * TIF_FOREIGN_FPSTATE flag is cleared; * @@ -97,12 +118,1357 @@ * returned from the 2nd syscall yet, TIF_FOREIGN_FPSTATE is still set so * whatever is in the FPSIMD registers is not saved to memory, but discarded. */ -static DEFINE_PER_CPU(struct fpsimd_state *, fpsimd_last_state); +struct fpsimd_last_state_struct { + struct user_fpsimd_state *st; + void *sve_state; + void *za_state; + u64 *svcr; + unsigned int sve_vl; + unsigned int sme_vl; +}; + +static DEFINE_PER_CPU(struct fpsimd_last_state_struct, fpsimd_last_state); + +__ro_after_init struct vl_info vl_info[ARM64_VEC_MAX] = { +#ifdef CONFIG_ARM64_SVE + [ARM64_VEC_SVE] = { + .type = ARM64_VEC_SVE, + .name = "SVE", + .min_vl = SVE_VL_MIN, + .max_vl = SVE_VL_MIN, + .max_virtualisable_vl = SVE_VL_MIN, + }, +#endif +#ifdef CONFIG_ARM64_SME + [ARM64_VEC_SME] = { + .type = ARM64_VEC_SME, + .name = "SME", + }, +#endif +}; + +static unsigned int vec_vl_inherit_flag(enum vec_type type) +{ + switch (type) { + case ARM64_VEC_SVE: + return TIF_SVE_VL_INHERIT; + case ARM64_VEC_SME: + return TIF_SME_VL_INHERIT; + default: + WARN_ON_ONCE(1); + return 0; + } +} + +struct vl_config { + int __default_vl; /* Default VL for tasks */ +}; + +static struct vl_config vl_config[ARM64_VEC_MAX]; + +static inline int get_default_vl(enum vec_type type) +{ + return READ_ONCE(vl_config[type].__default_vl); +} + +#ifdef CONFIG_ARM64_SVE + +static inline int get_sve_default_vl(void) +{ + return get_default_vl(ARM64_VEC_SVE); +} + +static inline void set_default_vl(enum vec_type type, int val) +{ + WRITE_ONCE(vl_config[type].__default_vl, val); +} + +static inline void set_sve_default_vl(int val) +{ + set_default_vl(ARM64_VEC_SVE, val); +} + +static void __percpu *efi_sve_state; + +#else /* ! CONFIG_ARM64_SVE */ + +/* Dummy declaration for code that will be optimised out: */ +extern void __percpu *efi_sve_state; + +#endif /* ! CONFIG_ARM64_SVE */ + +#ifdef CONFIG_ARM64_SME + +static int get_sme_default_vl(void) +{ + return get_default_vl(ARM64_VEC_SME); +} + +static void set_sme_default_vl(int val) +{ + set_default_vl(ARM64_VEC_SME, val); +} + +static void sme_free(struct task_struct *); + +#else + +static inline void sme_free(struct task_struct *t) { } + +#endif + +DEFINE_PER_CPU(bool, fpsimd_context_busy); +EXPORT_PER_CPU_SYMBOL(fpsimd_context_busy); + +static void fpsimd_bind_task_to_cpu(void); + +static void __get_cpu_fpsimd_context(void) +{ + bool busy = __this_cpu_xchg(fpsimd_context_busy, true); + + WARN_ON(busy); +} + +/* + * Claim ownership of the CPU FPSIMD context for use by the calling context. + * + * The caller may freely manipulate the FPSIMD context metadata until + * put_cpu_fpsimd_context() is called. + * + * The double-underscore version must only be called if you know the task + * can't be preempted. + * + * On RT kernels local_bh_disable() is not sufficient because it only + * serializes soft interrupt related sections via a local lock, but stays + * preemptible. Disabling preemption is the right choice here as bottom + * half processing is always in thread context on RT kernels so it + * implicitly prevents bottom half processing as well. + */ +static void get_cpu_fpsimd_context(void) +{ + if (!IS_ENABLED(CONFIG_PREEMPT_RT)) + local_bh_disable(); + else + preempt_disable(); + __get_cpu_fpsimd_context(); +} + +static void __put_cpu_fpsimd_context(void) +{ + bool busy = __this_cpu_xchg(fpsimd_context_busy, false); + + WARN_ON(!busy); /* No matching get_cpu_fpsimd_context()? */ +} + +/* + * Release the CPU FPSIMD context. + * + * Must be called from a context in which get_cpu_fpsimd_context() was + * previously called, with no call to put_cpu_fpsimd_context() in the + * meantime. + */ +static void put_cpu_fpsimd_context(void) +{ + __put_cpu_fpsimd_context(); + if (!IS_ENABLED(CONFIG_PREEMPT_RT)) + local_bh_enable(); + else + preempt_enable(); +} + +static bool have_cpu_fpsimd_context(void) +{ + return !preemptible() && __this_cpu_read(fpsimd_context_busy); +} + +unsigned int task_get_vl(const struct task_struct *task, enum vec_type type) +{ + return task->thread.vl[type]; +} + +void task_set_vl(struct task_struct *task, enum vec_type type, + unsigned long vl) +{ + task->thread.vl[type] = vl; +} + +unsigned int task_get_vl_onexec(const struct task_struct *task, + enum vec_type type) +{ + return task->thread.vl_onexec[type]; +} + +void task_set_vl_onexec(struct task_struct *task, enum vec_type type, + unsigned long vl) +{ + task->thread.vl_onexec[type] = vl; +} + +/* + * TIF_SME controls whether a task can use SME without trapping while + * in userspace, when TIF_SME is set then we must have storage + * alocated in sve_state and za_state to store the contents of both ZA + * and the SVE registers for both streaming and non-streaming modes. + * + * If both SVCR.ZA and SVCR.SM are disabled then at any point we + * may disable TIF_SME and reenable traps. + */ + + +/* + * TIF_SVE controls whether a task can use SVE without trapping while + * in userspace, and also (together with TIF_SME) the way a task's + * FPSIMD/SVE state is stored in thread_struct. + * + * The kernel uses this flag to track whether a user task is actively + * using SVE, and therefore whether full SVE register state needs to + * be tracked. If not, the cheaper FPSIMD context handling code can + * be used instead of the more costly SVE equivalents. + * + * * TIF_SVE or SVCR.SM set: + * + * The task can execute SVE instructions while in userspace without + * trapping to the kernel. + * + * When stored, Z0-Z31 (incorporating Vn in bits[127:0] or the + * corresponding Zn), P0-P15 and FFR are encoded in + * task->thread.sve_state, formatted appropriately for vector + * length task->thread.sve_vl or, if SVCR.SM is set, + * task->thread.sme_vl. + * + * task->thread.sve_state must point to a valid buffer at least + * sve_state_size(task) bytes in size. + * + * During any syscall, the kernel may optionally clear TIF_SVE and + * discard the vector state except for the FPSIMD subset. + * + * * TIF_SVE clear: + * + * An attempt by the user task to execute an SVE instruction causes + * do_sve_acc() to be called, which does some preparation and then + * sets TIF_SVE. + * + * When stored, FPSIMD registers V0-V31 are encoded in + * task->thread.uw.fpsimd_state; bits [max : 128] for each of Z0-Z31 are + * logically zero but not stored anywhere; P0-P15 and FFR are not + * stored and have unspecified values from userspace's point of + * view. For hygiene purposes, the kernel zeroes them on next use, + * but userspace is discouraged from relying on this. + * + * task->thread.sve_state does not need to be non-NULL, valid or any + * particular size: it must not be dereferenced. + * + * * FPSR and FPCR are always stored in task->thread.uw.fpsimd_state + * irrespective of whether TIF_SVE is clear or set, since these are + * not vector length dependent. + */ + +/* + * Update current's FPSIMD/SVE registers from thread_struct. + * + * This function should be called only when the FPSIMD/SVE state in + * thread_struct is known to be up to date, when preparing to enter + * userspace. + */ +static void task_fpsimd_load(void) +{ + bool restore_sve_regs = false; + bool restore_ffr; + + WARN_ON(!system_supports_fpsimd()); + WARN_ON(!have_cpu_fpsimd_context()); + + /* Check if we should restore SVE first */ + if (IS_ENABLED(CONFIG_ARM64_SVE) && test_thread_flag(TIF_SVE)) { + sve_set_vq(sve_vq_from_vl(task_get_sve_vl(current)) - 1); + restore_sve_regs = true; + restore_ffr = true; + } + + /* Restore SME, override SVE register configuration if needed */ + if (system_supports_sme()) { + unsigned long sme_vl = task_get_sme_vl(current); + + /* Ensure VL is set up for restoring data */ + if (test_thread_flag(TIF_SME)) + sme_set_vq(sve_vq_from_vl(sme_vl) - 1); + + write_sysreg_s(current->thread.svcr, SYS_SVCR); + + if (thread_za_enabled(¤t->thread)) + za_load_state(current->thread.za_state); + + if (thread_sm_enabled(¤t->thread)) { + restore_sve_regs = true; + restore_ffr = system_supports_fa64(); + } + } + + if (restore_sve_regs) + sve_load_state(sve_pffr(¤t->thread), + ¤t->thread.uw.fpsimd_state.fpsr, + restore_ffr); + else + fpsimd_load_state(¤t->thread.uw.fpsimd_state); +} + +/* + * Ensure FPSIMD/SVE storage in memory for the loaded context is up to + * date with respect to the CPU registers. Note carefully that the + * current context is the context last bound to the CPU stored in + * last, if KVM is involved this may be the guest VM context rather + * than the host thread for the VM pointed to by current. This means + * that we must always reference the state storage via last rather + * than via current, other than the TIF_ flags which KVM will + * carefully maintain for us. + */ +static void fpsimd_save(void) +{ + struct fpsimd_last_state_struct const *last = + this_cpu_ptr(&fpsimd_last_state); + /* set by fpsimd_bind_task_to_cpu() or fpsimd_bind_state_to_cpu() */ + bool save_sve_regs = false; + bool save_ffr; + unsigned int vl; + + WARN_ON(!system_supports_fpsimd()); + WARN_ON(!have_cpu_fpsimd_context()); + + if (test_thread_flag(TIF_FOREIGN_FPSTATE)) + return; + + if (test_thread_flag(TIF_SVE)) { + save_sve_regs = true; + save_ffr = true; + vl = last->sve_vl; + } + + if (system_supports_sme()) { + u64 *svcr = last->svcr; + + *svcr = read_sysreg_s(SYS_SVCR); + + if (*svcr & SVCR_ZA_MASK) + za_save_state(last->za_state); + + /* If we are in streaming mode override regular SVE. */ + if (*svcr & SVCR_SM_MASK) { + save_sve_regs = true; + save_ffr = system_supports_fa64(); + vl = last->sme_vl; + } + } + + if (IS_ENABLED(CONFIG_ARM64_SVE) && save_sve_regs) { + /* Get the configured VL from RDVL, will account for SM */ + if (WARN_ON(sve_get_vl() != vl)) { + /* + * Can't save the user regs, so current would + * re-enter user with corrupt state. + * There's no way to recover, so kill it: + */ + force_signal_inject(SIGKILL, SI_KERNEL, 0, 0); + return; + } + + sve_save_state((char *)last->sve_state + + sve_ffr_offset(vl), + &last->st->fpsr, save_ffr); + } else { + fpsimd_save_state(last->st); + } +} + +/* + * All vector length selection from userspace comes through here. + * We're on a slow path, so some sanity-checks are included. + * If things go wrong there's a bug somewhere, but try to fall back to a + * safe choice. + */ +static unsigned int find_supported_vector_length(enum vec_type type, + unsigned int vl) +{ + struct vl_info *info = &vl_info[type]; + int bit; + int max_vl = info->max_vl; + + if (WARN_ON(!sve_vl_valid(vl))) + vl = info->min_vl; + + if (WARN_ON(!sve_vl_valid(max_vl))) + max_vl = info->min_vl; + + if (vl > max_vl) + vl = max_vl; + if (vl < info->min_vl) + vl = info->min_vl; + + bit = find_next_bit(info->vq_map, SVE_VQ_MAX, + __vq_to_bit(sve_vq_from_vl(vl))); + return sve_vl_from_vq(__bit_to_vq(bit)); +} + +#if defined(CONFIG_ARM64_SVE) && defined(CONFIG_SYSCTL) + +static int vec_proc_do_default_vl(struct ctl_table *table, int write, + void *buffer, size_t *lenp, loff_t *ppos) +{ + struct vl_info *info = table->extra1; + enum vec_type type = info->type; + int ret; + int vl = get_default_vl(type); + struct ctl_table tmp_table = { + .data = &vl, + .maxlen = sizeof(vl), + }; + + ret = proc_dointvec(&tmp_table, write, buffer, lenp, ppos); + if (ret || !write) + return ret; + + /* Writing -1 has the special meaning "set to max": */ + if (vl == -1) + vl = info->max_vl; + + if (!sve_vl_valid(vl)) + return -EINVAL; + + set_default_vl(type, find_supported_vector_length(type, vl)); + return 0; +} + +static struct ctl_table sve_default_vl_table[] = { + { + .procname = "sve_default_vector_length", + .mode = 0644, + .proc_handler = vec_proc_do_default_vl, + .extra1 = &vl_info[ARM64_VEC_SVE], + }, + { } +}; + +static int __init sve_sysctl_init(void) +{ + if (system_supports_sve()) + if (!register_sysctl("abi", sve_default_vl_table)) + return -EINVAL; + + return 0; +} + +#else /* ! (CONFIG_ARM64_SVE && CONFIG_SYSCTL) */ +static int __init sve_sysctl_init(void) { return 0; } +#endif /* ! (CONFIG_ARM64_SVE && CONFIG_SYSCTL) */ + +#if defined(CONFIG_ARM64_SME) && defined(CONFIG_SYSCTL) +static struct ctl_table sme_default_vl_table[] = { + { + .procname = "sme_default_vector_length", + .mode = 0644, + .proc_handler = vec_proc_do_default_vl, + .extra1 = &vl_info[ARM64_VEC_SME], + }, + { } +}; + +static int __init sme_sysctl_init(void) +{ + if (system_supports_sme()) + if (!register_sysctl("abi", sme_default_vl_table)) + return -EINVAL; + + return 0; +} + +#else /* ! (CONFIG_ARM64_SME && CONFIG_SYSCTL) */ +static int __init sme_sysctl_init(void) { return 0; } +#endif /* ! (CONFIG_ARM64_SME && CONFIG_SYSCTL) */ + +#define ZREG(sve_state, vq, n) ((char *)(sve_state) + \ + (SVE_SIG_ZREG_OFFSET(vq, n) - SVE_SIG_REGS_OFFSET)) + +#ifdef CONFIG_CPU_BIG_ENDIAN +static __uint128_t arm64_cpu_to_le128(__uint128_t x) +{ + u64 a = swab64(x); + u64 b = swab64(x >> 64); + + return ((__uint128_t)a << 64) | b; +} +#else +static __uint128_t arm64_cpu_to_le128(__uint128_t x) +{ + return x; +} +#endif + +#define arm64_le128_to_cpu(x) arm64_cpu_to_le128(x) + +static void __fpsimd_to_sve(void *sst, struct user_fpsimd_state const *fst, + unsigned int vq) +{ + unsigned int i; + __uint128_t *p; + + for (i = 0; i < SVE_NUM_ZREGS; ++i) { + p = (__uint128_t *)ZREG(sst, vq, i); + *p = arm64_cpu_to_le128(fst->vregs[i]); + } +} + +/* + * Transfer the FPSIMD state in task->thread.uw.fpsimd_state to + * task->thread.sve_state. + * + * Task can be a non-runnable task, or current. In the latter case, + * the caller must have ownership of the cpu FPSIMD context before calling + * this function. + * task->thread.sve_state must point to at least sve_state_size(task) + * bytes of allocated kernel memory. + * task->thread.uw.fpsimd_state must be up to date before calling this + * function. + */ +static void fpsimd_to_sve(struct task_struct *task) +{ + unsigned int vq; + void *sst = task->thread.sve_state; + struct user_fpsimd_state const *fst = &task->thread.uw.fpsimd_state; + + if (!system_supports_sve()) + return; + + vq = sve_vq_from_vl(thread_get_cur_vl(&task->thread)); + __fpsimd_to_sve(sst, fst, vq); +} + +/* + * Transfer the SVE state in task->thread.sve_state to + * task->thread.uw.fpsimd_state. + * + * Task can be a non-runnable task, or current. In the latter case, + * the caller must have ownership of the cpu FPSIMD context before calling + * this function. + * task->thread.sve_state must point to at least sve_state_size(task) + * bytes of allocated kernel memory. + * task->thread.sve_state must be up to date before calling this function. + */ +static void sve_to_fpsimd(struct task_struct *task) +{ + unsigned int vq, vl; + void const *sst = task->thread.sve_state; + struct user_fpsimd_state *fst = &task->thread.uw.fpsimd_state; + unsigned int i; + __uint128_t const *p; + + if (!system_supports_sve()) + return; + + vl = thread_get_cur_vl(&task->thread); + vq = sve_vq_from_vl(vl); + for (i = 0; i < SVE_NUM_ZREGS; ++i) { + p = (__uint128_t const *)ZREG(sst, vq, i); + fst->vregs[i] = arm64_le128_to_cpu(*p); + } +} + +#ifdef CONFIG_ARM64_SVE +/* + * Call __sve_free() directly only if you know task can't be scheduled + * or preempted. + */ +static void __sve_free(struct task_struct *task) +{ + kfree(task->thread.sve_state); + task->thread.sve_state = NULL; +} + +static void sve_free(struct task_struct *task) +{ + WARN_ON(test_tsk_thread_flag(task, TIF_SVE)); + + __sve_free(task); +} + +/* + * Return how many bytes of memory are required to store the full SVE + * state for task, given task's currently configured vector length. + */ +size_t sve_state_size(struct task_struct const *task) +{ + unsigned int vl = 0; + + if (system_supports_sve()) + vl = task_get_sve_vl(task); + if (system_supports_sme()) + vl = max(vl, task_get_sme_vl(task)); + + return SVE_SIG_REGS_SIZE(sve_vq_from_vl(vl)); +} + +/* + * Ensure that task->thread.sve_state is allocated and sufficiently large. + * + * This function should be used only in preparation for replacing + * task->thread.sve_state with new data. The memory is always zeroed + * here to prevent stale data from showing through: this is done in + * the interest of testability and predictability: except in the + * do_sve_acc() case, there is no ABI requirement to hide stale data + * written previously be task. + */ +void sve_alloc(struct task_struct *task, bool flush) +{ + if (task->thread.sve_state) { + if (flush) + memset(task->thread.sve_state, 0, + sve_state_size(task)); + return; + } + + /* This is a small allocation (maximum ~8KB) and Should Not Fail. */ + task->thread.sve_state = + kzalloc(sve_state_size(task), GFP_KERNEL); +} + + +/* + * Force the FPSIMD state shared with SVE to be updated in the SVE state + * even if the SVE state is the current active state. + * + * This should only be called by ptrace. task must be non-runnable. + * task->thread.sve_state must point to at least sve_state_size(task) + * bytes of allocated kernel memory. + */ +void fpsimd_force_sync_to_sve(struct task_struct *task) +{ + fpsimd_to_sve(task); +} + +/* + * Ensure that task->thread.sve_state is up to date with respect to + * the user task, irrespective of when SVE is in use or not. + * + * This should only be called by ptrace. task must be non-runnable. + * task->thread.sve_state must point to at least sve_state_size(task) + * bytes of allocated kernel memory. + */ +void fpsimd_sync_to_sve(struct task_struct *task) +{ + if (!test_tsk_thread_flag(task, TIF_SVE) && + !thread_sm_enabled(&task->thread)) + fpsimd_to_sve(task); +} + +/* + * Ensure that task->thread.uw.fpsimd_state is up to date with respect to + * the user task, irrespective of whether SVE is in use or not. + * + * This should only be called by ptrace. task must be non-runnable. + * task->thread.sve_state must point to at least sve_state_size(task) + * bytes of allocated kernel memory. + */ +void sve_sync_to_fpsimd(struct task_struct *task) +{ + if (test_tsk_thread_flag(task, TIF_SVE) || + thread_sm_enabled(&task->thread)) + sve_to_fpsimd(task); +} + +/* + * Ensure that task->thread.sve_state is up to date with respect to + * the task->thread.uw.fpsimd_state. + * + * This should only be called by ptrace to merge new FPSIMD register + * values into a task for which SVE is currently active. + * task must be non-runnable. + * task->thread.sve_state must point to at least sve_state_size(task) + * bytes of allocated kernel memory. + * task->thread.uw.fpsimd_state must already have been initialised with + * the new FPSIMD register values to be merged in. + */ +void sve_sync_from_fpsimd_zeropad(struct task_struct *task) +{ + unsigned int vq; + void *sst = task->thread.sve_state; + struct user_fpsimd_state const *fst = &task->thread.uw.fpsimd_state; + + if (!test_tsk_thread_flag(task, TIF_SVE)) + return; + + vq = sve_vq_from_vl(thread_get_cur_vl(&task->thread)); + + memset(sst, 0, SVE_SIG_REGS_SIZE(vq)); + __fpsimd_to_sve(sst, fst, vq); +} + +int vec_set_vector_length(struct task_struct *task, enum vec_type type, + unsigned long vl, unsigned long flags) +{ + if (flags & ~(unsigned long)(PR_SVE_VL_INHERIT | + PR_SVE_SET_VL_ONEXEC)) + return -EINVAL; + + if (!sve_vl_valid(vl)) + return -EINVAL; + + /* + * Clamp to the maximum vector length that VL-agnostic code + * can work with. A flag may be assigned in the future to + * allow setting of larger vector lengths without confusing + * older software. + */ + if (vl > VL_ARCH_MAX) + vl = VL_ARCH_MAX; + + vl = find_supported_vector_length(type, vl); + + if (flags & (PR_SVE_VL_INHERIT | + PR_SVE_SET_VL_ONEXEC)) + task_set_vl_onexec(task, type, vl); + else + /* Reset VL to system default on next exec: */ + task_set_vl_onexec(task, type, 0); + + /* Only actually set the VL if not deferred: */ + if (flags & PR_SVE_SET_VL_ONEXEC) + goto out; + + if (vl == task_get_vl(task, type)) + goto out; + + /* + * To ensure the FPSIMD bits of the SVE vector registers are preserved, + * write any live register state back to task_struct, and convert to a + * regular FPSIMD thread. + */ + if (task == current) { + get_cpu_fpsimd_context(); + + fpsimd_save(); + } + + fpsimd_flush_task_state(task); + if (test_and_clear_tsk_thread_flag(task, TIF_SVE) || + thread_sm_enabled(&task->thread)) + sve_to_fpsimd(task); + + if (system_supports_sme() && type == ARM64_VEC_SME) { + task->thread.svcr &= ~(SVCR_SM_MASK | + SVCR_ZA_MASK); + clear_thread_flag(TIF_SME); + } + + if (task == current) + put_cpu_fpsimd_context(); + + /* + * Force reallocation of task SVE and SME state to the correct + * size on next use: + */ + sve_free(task); + if (system_supports_sme() && type == ARM64_VEC_SME) + sme_free(task); + + task_set_vl(task, type, vl); + +out: + update_tsk_thread_flag(task, vec_vl_inherit_flag(type), + flags & PR_SVE_VL_INHERIT); + + return 0; +} + +/* + * Encode the current vector length and flags for return. + * This is only required for prctl(): ptrace has separate fields. + * SVE and SME use the same bits for _ONEXEC and _INHERIT. + * + * flags are as for vec_set_vector_length(). + */ +static int vec_prctl_status(enum vec_type type, unsigned long flags) +{ + int ret; + + if (flags & PR_SVE_SET_VL_ONEXEC) + ret = task_get_vl_onexec(current, type); + else + ret = task_get_vl(current, type); + + if (test_thread_flag(vec_vl_inherit_flag(type))) + ret |= PR_SVE_VL_INHERIT; + + return ret; +} + +/* PR_SVE_SET_VL */ +int sve_set_current_vl(unsigned long arg) +{ + unsigned long vl, flags; + int ret; + + vl = arg & PR_SVE_VL_LEN_MASK; + flags = arg & ~vl; + + if (!system_supports_sve() || is_compat_task()) + return -EINVAL; + + ret = vec_set_vector_length(current, ARM64_VEC_SVE, vl, flags); + if (ret) + return ret; + + return vec_prctl_status(ARM64_VEC_SVE, flags); +} + +/* PR_SVE_GET_VL */ +int sve_get_current_vl(void) +{ + if (!system_supports_sve() || is_compat_task()) + return -EINVAL; + + return vec_prctl_status(ARM64_VEC_SVE, 0); +} + +#ifdef CONFIG_ARM64_SME +/* PR_SME_SET_VL */ +int sme_set_current_vl(unsigned long arg) +{ + unsigned long vl, flags; + int ret; + + vl = arg & PR_SME_VL_LEN_MASK; + flags = arg & ~vl; + + if (!system_supports_sme() || is_compat_task()) + return -EINVAL; + + ret = vec_set_vector_length(current, ARM64_VEC_SME, vl, flags); + if (ret) + return ret; + + return vec_prctl_status(ARM64_VEC_SME, flags); +} + +/* PR_SME_GET_VL */ +int sme_get_current_vl(void) +{ + if (!system_supports_sme() || is_compat_task()) + return -EINVAL; + + return vec_prctl_status(ARM64_VEC_SME, 0); +} +#endif /* CONFIG_ARM64_SME */ + +static void vec_probe_vqs(struct vl_info *info, + DECLARE_BITMAP(map, SVE_VQ_MAX)) +{ + unsigned int vq, vl; + + bitmap_zero(map, SVE_VQ_MAX); + + for (vq = SVE_VQ_MAX; vq >= SVE_VQ_MIN; --vq) { + write_vl(info->type, vq - 1); /* self-syncing */ + + switch (info->type) { + case ARM64_VEC_SVE: + vl = sve_get_vl(); + break; + case ARM64_VEC_SME: + vl = sme_get_vl(); + break; + default: + vl = 0; + break; + } + + /* Minimum VL identified? */ + if (sve_vq_from_vl(vl) > vq) + break; + + vq = sve_vq_from_vl(vl); /* skip intervening lengths */ + set_bit(__vq_to_bit(vq), map); + } +} + +/* + * Initialise the set of known supported VQs for the boot CPU. + * This is called during kernel boot, before secondary CPUs are brought up. + */ +void __init vec_init_vq_map(enum vec_type type) +{ + struct vl_info *info = &vl_info[type]; + vec_probe_vqs(info, info->vq_map); + bitmap_copy(info->vq_partial_map, info->vq_map, SVE_VQ_MAX); +} + +/* + * If we haven't committed to the set of supported VQs yet, filter out + * those not supported by the current CPU. + * This function is called during the bring-up of early secondary CPUs only. + */ +void vec_update_vq_map(enum vec_type type) +{ + struct vl_info *info = &vl_info[type]; + DECLARE_BITMAP(tmp_map, SVE_VQ_MAX); + + vec_probe_vqs(info, tmp_map); + bitmap_and(info->vq_map, info->vq_map, tmp_map, SVE_VQ_MAX); + bitmap_or(info->vq_partial_map, info->vq_partial_map, tmp_map, + SVE_VQ_MAX); +} + +/* + * Check whether the current CPU supports all VQs in the committed set. + * This function is called during the bring-up of late secondary CPUs only. + */ +int vec_verify_vq_map(enum vec_type type) +{ + struct vl_info *info = &vl_info[type]; + DECLARE_BITMAP(tmp_map, SVE_VQ_MAX); + unsigned long b; + + vec_probe_vqs(info, tmp_map); + + bitmap_complement(tmp_map, tmp_map, SVE_VQ_MAX); + if (bitmap_intersects(tmp_map, info->vq_map, SVE_VQ_MAX)) { + pr_warn("%s: cpu%d: Required vector length(s) missing\n", + info->name, smp_processor_id()); + return -EINVAL; + } + + if (!IS_ENABLED(CONFIG_KVM) || !is_hyp_mode_available()) + return 0; + + /* + * For KVM, it is necessary to ensure that this CPU doesn't + * support any vector length that guests may have probed as + * unsupported. + */ + + /* Recover the set of supported VQs: */ + bitmap_complement(tmp_map, tmp_map, SVE_VQ_MAX); + /* Find VQs supported that are not globally supported: */ + bitmap_andnot(tmp_map, tmp_map, info->vq_map, SVE_VQ_MAX); + + /* Find the lowest such VQ, if any: */ + b = find_last_bit(tmp_map, SVE_VQ_MAX); + if (b >= SVE_VQ_MAX) + return 0; /* no mismatches */ + + /* + * Mismatches above sve_max_virtualisable_vl are fine, since + * no guest is allowed to configure ZCR_EL2.LEN to exceed this: + */ + if (sve_vl_from_vq(__bit_to_vq(b)) <= info->max_virtualisable_vl) { + pr_warn("%s: cpu%d: Unsupported vector length(s) present\n", + info->name, smp_processor_id()); + return -EINVAL; + } + + return 0; +} + +static void __init sve_efi_setup(void) +{ + int max_vl = 0; + int i; + + if (!IS_ENABLED(CONFIG_EFI)) + return; + + for (i = 0; i < ARRAY_SIZE(vl_info); i++) + max_vl = max(vl_info[i].max_vl, max_vl); + + /* + * alloc_percpu() warns and prints a backtrace if this goes wrong. + * This is evidence of a crippled system and we are returning void, + * so no attempt is made to handle this situation here. + */ + if (!sve_vl_valid(max_vl)) + goto fail; + + efi_sve_state = __alloc_percpu( + SVE_SIG_REGS_SIZE(sve_vq_from_vl(max_vl)), SVE_VQ_BYTES); + if (!efi_sve_state) + goto fail; + + return; + +fail: + panic("Cannot allocate percpu memory for EFI SVE save/restore"); +} + +/* + * Enable SVE for EL1. + * Intended for use by the cpufeatures code during CPU boot. + */ +void sve_kernel_enable(const struct arm64_cpu_capabilities *__always_unused p) +{ + write_sysreg(read_sysreg(CPACR_EL1) | CPACR_EL1_ZEN_EL1EN, CPACR_EL1); + isb(); +} + +/* + * Read the pseudo-ZCR used by cpufeatures to identify the supported SVE + * vector length. + * + * Use only if SVE is present. + * This function clobbers the SVE vector length. + */ +u64 read_zcr_features(void) +{ + u64 zcr; + unsigned int vq_max; + + /* + * Set the maximum possible VL, and write zeroes to all other + * bits to see if they stick. + */ + sve_kernel_enable(NULL); + write_sysreg_s(ZCR_ELx_LEN_MASK, SYS_ZCR_EL1); + + zcr = read_sysreg_s(SYS_ZCR_EL1); + zcr &= ~(u64)ZCR_ELx_LEN_MASK; /* find sticky 1s outside LEN field */ + vq_max = sve_vq_from_vl(sve_get_vl()); + zcr |= vq_max - 1; /* set LEN field to maximum effective value */ + + return zcr; +} + +void __init sve_setup(void) +{ + struct vl_info *info = &vl_info[ARM64_VEC_SVE]; + u64 zcr; + DECLARE_BITMAP(tmp_map, SVE_VQ_MAX); + unsigned long b; + + if (!system_supports_sve()) + return; + + /* + * The SVE architecture mandates support for 128-bit vectors, + * so sve_vq_map must have at least SVE_VQ_MIN set. + * If something went wrong, at least try to patch it up: + */ + if (WARN_ON(!test_bit(__vq_to_bit(SVE_VQ_MIN), info->vq_map))) + set_bit(__vq_to_bit(SVE_VQ_MIN), info->vq_map); + + zcr = read_sanitised_ftr_reg(SYS_ZCR_EL1); + info->max_vl = sve_vl_from_vq((zcr & ZCR_ELx_LEN_MASK) + 1); + + /* + * Sanity-check that the max VL we determined through CPU features + * corresponds properly to sve_vq_map. If not, do our best: + */ + if (WARN_ON(info->max_vl != find_supported_vector_length(ARM64_VEC_SVE, + info->max_vl))) + info->max_vl = find_supported_vector_length(ARM64_VEC_SVE, + info->max_vl); + + /* + * For the default VL, pick the maximum supported value <= 64. + * VL == 64 is guaranteed not to grow the signal frame. + */ + set_sve_default_vl(find_supported_vector_length(ARM64_VEC_SVE, 64)); + + bitmap_andnot(tmp_map, info->vq_partial_map, info->vq_map, + SVE_VQ_MAX); + + b = find_last_bit(tmp_map, SVE_VQ_MAX); + if (b >= SVE_VQ_MAX) + /* No non-virtualisable VLs found */ + info->max_virtualisable_vl = SVE_VQ_MAX; + else if (WARN_ON(b == SVE_VQ_MAX - 1)) + /* No virtualisable VLs? This is architecturally forbidden. */ + info->max_virtualisable_vl = SVE_VQ_MIN; + else /* b + 1 < SVE_VQ_MAX */ + info->max_virtualisable_vl = sve_vl_from_vq(__bit_to_vq(b + 1)); + + if (info->max_virtualisable_vl > info->max_vl) + info->max_virtualisable_vl = info->max_vl; + + pr_info("%s: maximum available vector length %u bytes per vector\n", + info->name, info->max_vl); + pr_info("%s: default vector length %u bytes per vector\n", + info->name, get_sve_default_vl()); + + /* KVM decides whether to support mismatched systems. Just warn here: */ + if (sve_max_virtualisable_vl() < sve_max_vl()) + pr_warn("%s: unvirtualisable vector lengths present\n", + info->name); + + sve_efi_setup(); +} + +/* + * Called from the put_task_struct() path, which cannot get here + * unless dead_task is really dead and not schedulable. + */ +void fpsimd_release_task(struct task_struct *dead_task) +{ + __sve_free(dead_task); + sme_free(dead_task); +} + +#endif /* CONFIG_ARM64_SVE */ + +#ifdef CONFIG_ARM64_SME + +/* + * Ensure that task->thread.za_state is allocated and sufficiently large. + * + * This function should be used only in preparation for replacing + * task->thread.za_state with new data. The memory is always zeroed + * here to prevent stale data from showing through: this is done in + * the interest of testability and predictability, the architecture + * guarantees that when ZA is enabled it will be zeroed. + */ +void sme_alloc(struct task_struct *task) +{ + if (task->thread.za_state) { + memset(task->thread.za_state, 0, za_state_size(task)); + return; + } + + /* This could potentially be up to 64K. */ + task->thread.za_state = + kzalloc(za_state_size(task), GFP_KERNEL); +} + +static void sme_free(struct task_struct *task) +{ + kfree(task->thread.za_state); + task->thread.za_state = NULL; +} + +void sme_kernel_enable(const struct arm64_cpu_capabilities *__always_unused p) +{ + /* Set priority for all PEs to architecturally defined minimum */ + write_sysreg_s(read_sysreg_s(SYS_SMPRI_EL1) & ~SMPRI_EL1_PRIORITY_MASK, + SYS_SMPRI_EL1); + + /* Allow SME in kernel */ + write_sysreg(read_sysreg(CPACR_EL1) | CPACR_EL1_SMEN_EL1EN, CPACR_EL1); + isb(); + + /* Allow EL0 to access TPIDR2 */ + write_sysreg(read_sysreg(SCTLR_EL1) | SCTLR_ELx_ENTP2, SCTLR_EL1); + isb(); +} + +/* + * This must be called after sme_kernel_enable(), we rely on the + * feature table being sorted to ensure this. + */ +void fa64_kernel_enable(const struct arm64_cpu_capabilities *__always_unused p) +{ + /* Allow use of FA64 */ + write_sysreg_s(read_sysreg_s(SYS_SMCR_EL1) | SMCR_ELx_FA64_MASK, + SYS_SMCR_EL1); +} + +/* + * Read the pseudo-SMCR used by cpufeatures to identify the supported + * vector length. + * + * Use only if SME is present. + * This function clobbers the SME vector length. + */ +u64 read_smcr_features(void) +{ + u64 smcr; + unsigned int vq_max; + + sme_kernel_enable(NULL); + sme_smstart_sm(); + + /* + * Set the maximum possible VL. + */ + write_sysreg_s(read_sysreg_s(SYS_SMCR_EL1) | SMCR_ELx_LEN_MASK, + SYS_SMCR_EL1); + + smcr = read_sysreg_s(SYS_SMCR_EL1); + smcr &= ~(u64)SMCR_ELx_LEN_MASK; /* Only the LEN field */ + vq_max = sve_vq_from_vl(sve_get_vl()); + smcr |= vq_max - 1; /* set LEN field to maximum effective value */ + + sme_smstop_sm(); + + return smcr; +} + +void __init sme_setup(void) +{ + struct vl_info *info = &vl_info[ARM64_VEC_SME]; + u64 smcr; + int min_bit; + + if (!system_supports_sme()) + return; + + /* + * SME doesn't require any particular vector length be + * supported but it does require at least one. We should have + * disabled the feature entirely while bringing up CPUs but + * let's double check here. + */ + WARN_ON(bitmap_empty(info->vq_map, SVE_VQ_MAX)); + + min_bit = find_last_bit(info->vq_map, SVE_VQ_MAX); + info->min_vl = sve_vl_from_vq(__bit_to_vq(min_bit)); + + smcr = read_sanitised_ftr_reg(SYS_SMCR_EL1); + info->max_vl = sve_vl_from_vq((smcr & SMCR_ELx_LEN_MASK) + 1); + + /* + * Sanity-check that the max VL we determined through CPU features + * corresponds properly to sme_vq_map. If not, do our best: + */ + if (WARN_ON(info->max_vl != find_supported_vector_length(ARM64_VEC_SME, + info->max_vl))) + info->max_vl = find_supported_vector_length(ARM64_VEC_SME, + info->max_vl); + + WARN_ON(info->min_vl > info->max_vl); + + /* + * For the default VL, pick the maximum supported value <= 32 + * (256 bits) if there is one since this is guaranteed not to + * grow the signal frame when in streaming mode, otherwise the + * minimum available VL will be used. + */ + set_sme_default_vl(find_supported_vector_length(ARM64_VEC_SME, 32)); + + pr_info("SME: minimum available vector length %u bytes per vector\n", + info->min_vl); + pr_info("SME: maximum available vector length %u bytes per vector\n", + info->max_vl); + pr_info("SME: default vector length %u bytes per vector\n", + get_sme_default_vl()); +} + +#endif /* CONFIG_ARM64_SME */ + +static void sve_init_regs(void) +{ + /* + * Convert the FPSIMD state to SVE, zeroing all the state that + * is not shared with FPSIMD. If (as is likely) the current + * state is live in the registers then do this there and + * update our metadata for the current task including + * disabling the trap, otherwise update our in-memory copy. + * We are guaranteed to not be in streaming mode, we can only + * take a SVE trap when not in streaming mode and we can't be + * in streaming mode when taking a SME trap. + */ + if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) { + unsigned long vq_minus_one = + sve_vq_from_vl(task_get_sve_vl(current)) - 1; + sve_set_vq(vq_minus_one); + sve_flush_live(true, vq_minus_one); + fpsimd_bind_task_to_cpu(); + } else { + fpsimd_to_sve(current); + } +} + +/* + * Trapped SVE access + * + * Storage is allocated for the full SVE state, the current FPSIMD + * register contents are migrated across, and the access trap is + * disabled. + * + * TIF_SVE should be clear on entry: otherwise, fpsimd_restore_current_state() + * would have disabled the SVE access trap for userspace during + * ret_to_user, making an SVE access trap impossible in that case. + */ +void do_sve_acc(unsigned long esr, struct pt_regs *regs) +{ + /* Even if we chose not to use SVE, the hardware could still trap: */ + if (unlikely(!system_supports_sve()) || WARN_ON(is_compat_task())) { + force_signal_inject(SIGILL, ILL_ILLOPC, regs->pc, 0); + return; + } + + sve_alloc(current, true); + if (!current->thread.sve_state) { + force_sig(SIGKILL); + return; + } + + get_cpu_fpsimd_context(); + + if (test_and_set_thread_flag(TIF_SVE)) + WARN_ON(1); /* SVE access shouldn't have trapped */ + + /* + * Even if the task can have used streaming mode we can only + * generate SVE access traps in normal SVE mode and + * transitioning out of streaming mode may discard any + * streaming mode state. Always clear the high bits to avoid + * any potential errors tracking what is properly initialised. + */ + sve_init_regs(); + + put_cpu_fpsimd_context(); +} + +/* + * Trapped SME access + * + * Storage is allocated for the full SVE and SME state, the current + * FPSIMD register contents are migrated to SVE if SVE is not already + * active, and the access trap is disabled. + * + * TIF_SME should be clear on entry: otherwise, fpsimd_restore_current_state() + * would have disabled the SME access trap for userspace during + * ret_to_user, making an SVE access trap impossible in that case. + */ +void do_sme_acc(unsigned long esr, struct pt_regs *regs) +{ + /* Even if we chose not to use SME, the hardware could still trap: */ + if (unlikely(!system_supports_sme()) || WARN_ON(is_compat_task())) { + force_signal_inject(SIGILL, ILL_ILLOPC, regs->pc, 0); + return; + } + + /* + * If this not a trap due to SME being disabled then something + * is being used in the wrong mode, report as SIGILL. + */ + if (ESR_ELx_ISS(esr) != ESR_ELx_SME_ISS_SME_DISABLED) { + force_signal_inject(SIGILL, ILL_ILLOPC, regs->pc, 0); + return; + } + + sve_alloc(current, false); + sme_alloc(current); + if (!current->thread.sve_state || !current->thread.za_state) { + force_sig(SIGKILL); + return; + } + + get_cpu_fpsimd_context(); + + /* With TIF_SME userspace shouldn't generate any traps */ + if (test_and_set_thread_flag(TIF_SME)) + WARN_ON(1); + + if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) { + unsigned long vq_minus_one = + sve_vq_from_vl(task_get_sme_vl(current)) - 1; + sme_set_vq(vq_minus_one); + + fpsimd_bind_task_to_cpu(); + } + + put_cpu_fpsimd_context(); +} /* * Trapped FP/ASIMD access. */ -void do_fpsimd_acc(unsigned int esr, struct pt_regs *regs) +void do_fpsimd_acc(unsigned long esr, struct pt_regs *regs) { /* TODO: implement lazy context saving/restoring */ WARN_ON(1); @@ -111,74 +1477,128 @@ void do_fpsimd_acc(unsigned int esr, struct pt_regs *regs) /* * Raise a SIGFPE for the current process. */ -void do_fpsimd_exc(unsigned int esr, struct pt_regs *regs) +void do_fpsimd_exc(unsigned long esr, struct pt_regs *regs) { - siginfo_t info; - unsigned int si_code = 0; - - if (esr & FPEXC_IOF) - si_code = FPE_FLTINV; - else if (esr & FPEXC_DZF) - si_code = FPE_FLTDIV; - else if (esr & FPEXC_OFF) - si_code = FPE_FLTOVF; - else if (esr & FPEXC_UFF) - si_code = FPE_FLTUND; - else if (esr & FPEXC_IXF) - si_code = FPE_FLTRES; - - memset(&info, 0, sizeof(info)); - info.si_signo = SIGFPE; - info.si_code = si_code; - info.si_addr = (void __user *)instruction_pointer(regs); + unsigned int si_code = FPE_FLTUNK; + + if (esr & ESR_ELx_FP_EXC_TFV) { + if (esr & FPEXC_IOF) + si_code = FPE_FLTINV; + else if (esr & FPEXC_DZF) + si_code = FPE_FLTDIV; + else if (esr & FPEXC_OFF) + si_code = FPE_FLTOVF; + else if (esr & FPEXC_UFF) + si_code = FPE_FLTUND; + else if (esr & FPEXC_IXF) + si_code = FPE_FLTRES; + } - send_sig_info(SIGFPE, &info, current); + send_sig_fault(SIGFPE, si_code, + (void __user *)instruction_pointer(regs), + current); } void fpsimd_thread_switch(struct task_struct *next) { + bool wrong_task, wrong_cpu; + if (!system_supports_fpsimd()) return; + + __get_cpu_fpsimd_context(); + + /* Save unsaved fpsimd state, if any: */ + fpsimd_save(); + /* - * Save the current FPSIMD state to memory, but only if whatever is in - * the registers is in fact the most recent userland FPSIMD state of - * 'current'. + * Fix up TIF_FOREIGN_FPSTATE to correctly describe next's + * state. For kernel threads, FPSIMD registers are never loaded + * and wrong_task and wrong_cpu will always be true. */ - if (current->mm && !test_thread_flag(TIF_FOREIGN_FPSTATE)) - fpsimd_save_state(¤t->thread.fpsimd_state); + wrong_task = __this_cpu_read(fpsimd_last_state.st) != + &next->thread.uw.fpsimd_state; + wrong_cpu = next->thread.fpsimd_cpu != smp_processor_id(); - if (next->mm) { - /* - * If we are switching to a task whose most recent userland - * FPSIMD state is already in the registers of *this* cpu, - * we can skip loading the state from memory. Otherwise, set - * the TIF_FOREIGN_FPSTATE flag so the state will be loaded - * upon the next return to userland. - */ - struct fpsimd_state *st = &next->thread.fpsimd_state; + update_tsk_thread_flag(next, TIF_FOREIGN_FPSTATE, + wrong_task || wrong_cpu); - if (__this_cpu_read(fpsimd_last_state) == st - && st->cpu == smp_processor_id()) - clear_ti_thread_flag(task_thread_info(next), - TIF_FOREIGN_FPSTATE); - else - set_ti_thread_flag(task_thread_info(next), - TIF_FOREIGN_FPSTATE); - } + __put_cpu_fpsimd_context(); +} + +static void fpsimd_flush_thread_vl(enum vec_type type) +{ + int vl, supported_vl; + + /* + * Reset the task vector length as required. This is where we + * ensure that all user tasks have a valid vector length + * configured: no kernel task can become a user task without + * an exec and hence a call to this function. By the time the + * first call to this function is made, all early hardware + * probing is complete, so __sve_default_vl should be valid. + * If a bug causes this to go wrong, we make some noise and + * try to fudge thread.sve_vl to a safe value here. + */ + vl = task_get_vl_onexec(current, type); + if (!vl) + vl = get_default_vl(type); + + if (WARN_ON(!sve_vl_valid(vl))) + vl = vl_info[type].min_vl; + + supported_vl = find_supported_vector_length(type, vl); + if (WARN_ON(supported_vl != vl)) + vl = supported_vl; + + task_set_vl(current, type, vl); + + /* + * If the task is not set to inherit, ensure that the vector + * length will be reset by a subsequent exec: + */ + if (!test_thread_flag(vec_vl_inherit_flag(type))) + task_set_vl_onexec(current, type, 0); } void fpsimd_flush_thread(void) { + void *sve_state = NULL; + void *za_state = NULL; + if (!system_supports_fpsimd()) return; - local_bh_disable(); + get_cpu_fpsimd_context(); - memset(¤t->thread.fpsimd_state, 0, sizeof(struct fpsimd_state)); fpsimd_flush_task_state(current); - set_thread_flag(TIF_FOREIGN_FPSTATE); + memset(¤t->thread.uw.fpsimd_state, 0, + sizeof(current->thread.uw.fpsimd_state)); - local_bh_enable(); + if (system_supports_sve()) { + clear_thread_flag(TIF_SVE); + + /* Defer kfree() while in atomic context */ + sve_state = current->thread.sve_state; + current->thread.sve_state = NULL; + + fpsimd_flush_thread_vl(ARM64_VEC_SVE); + } + + if (system_supports_sme()) { + clear_thread_flag(TIF_SME); + + /* Defer kfree() while in atomic context */ + za_state = current->thread.za_state; + current->thread.za_state = NULL; + + fpsimd_flush_thread_vl(ARM64_VEC_SME); + current->thread.svcr = 0; + } + + put_cpu_fpsimd_context(); + kfree(sve_state); + kfree(za_state); } /* @@ -190,72 +1610,201 @@ void fpsimd_preserve_current_state(void) if (!system_supports_fpsimd()) return; - local_bh_disable(); + get_cpu_fpsimd_context(); + fpsimd_save(); + put_cpu_fpsimd_context(); +} - if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) - fpsimd_save_state(¤t->thread.fpsimd_state); +/* + * Like fpsimd_preserve_current_state(), but ensure that + * current->thread.uw.fpsimd_state is updated so that it can be copied to + * the signal frame. + */ +void fpsimd_signal_preserve_current_state(void) +{ + fpsimd_preserve_current_state(); + if (test_thread_flag(TIF_SVE)) + sve_to_fpsimd(current); +} + +/* + * Associate current's FPSIMD context with this cpu + * The caller must have ownership of the cpu FPSIMD context before calling + * this function. + */ +static void fpsimd_bind_task_to_cpu(void) +{ + struct fpsimd_last_state_struct *last = + this_cpu_ptr(&fpsimd_last_state); + + WARN_ON(!system_supports_fpsimd()); + last->st = ¤t->thread.uw.fpsimd_state; + last->sve_state = current->thread.sve_state; + last->za_state = current->thread.za_state; + last->sve_vl = task_get_sve_vl(current); + last->sme_vl = task_get_sme_vl(current); + last->svcr = ¤t->thread.svcr; + current->thread.fpsimd_cpu = smp_processor_id(); - local_bh_enable(); + /* + * Toggle SVE and SME trapping for userspace if needed, these + * are serialsied by ret_to_user(). + */ + if (system_supports_sme()) { + if (test_thread_flag(TIF_SME)) + sme_user_enable(); + else + sme_user_disable(); + } + + if (system_supports_sve()) { + if (test_thread_flag(TIF_SVE)) + sve_user_enable(); + else + sve_user_disable(); + } +} + +void fpsimd_bind_state_to_cpu(struct user_fpsimd_state *st, void *sve_state, + unsigned int sve_vl, void *za_state, + unsigned int sme_vl, u64 *svcr) +{ + struct fpsimd_last_state_struct *last = + this_cpu_ptr(&fpsimd_last_state); + + WARN_ON(!system_supports_fpsimd()); + WARN_ON(!in_softirq() && !irqs_disabled()); + + last->st = st; + last->svcr = svcr; + last->sve_state = sve_state; + last->za_state = za_state; + last->sve_vl = sve_vl; + last->sme_vl = sme_vl; } /* * Load the userland FPSIMD state of 'current' from memory, but only if the * FPSIMD state already held in the registers is /not/ the most recent FPSIMD - * state of 'current' + * state of 'current'. This is called when we are preparing to return to + * userspace to ensure that userspace sees a good register state. */ void fpsimd_restore_current_state(void) { - if (!system_supports_fpsimd()) + /* + * For the tasks that were created before we detected the absence of + * FP/SIMD, the TIF_FOREIGN_FPSTATE could be set via fpsimd_thread_switch(), + * e.g, init. This could be then inherited by the children processes. + * If we later detect that the system doesn't support FP/SIMD, + * we must clear the flag for all the tasks to indicate that the + * FPSTATE is clean (as we can't have one) to avoid looping for ever in + * do_notify_resume(). + */ + if (!system_supports_fpsimd()) { + clear_thread_flag(TIF_FOREIGN_FPSTATE); return; + } - local_bh_disable(); + get_cpu_fpsimd_context(); if (test_and_clear_thread_flag(TIF_FOREIGN_FPSTATE)) { - struct fpsimd_state *st = ¤t->thread.fpsimd_state; - - fpsimd_load_state(st); - __this_cpu_write(fpsimd_last_state, st); - st->cpu = smp_processor_id(); + task_fpsimd_load(); + fpsimd_bind_task_to_cpu(); } - local_bh_enable(); + put_cpu_fpsimd_context(); } /* * Load an updated userland FPSIMD state for 'current' from memory and set the * flag that indicates that the FPSIMD register contents are the most recent - * FPSIMD state of 'current' + * FPSIMD state of 'current'. This is used by the signal code to restore the + * register state when returning from a signal handler in FPSIMD only cases, + * any SVE context will be discarded. */ -void fpsimd_update_current_state(struct fpsimd_state *state) +void fpsimd_update_current_state(struct user_fpsimd_state const *state) { - if (!system_supports_fpsimd()) + if (WARN_ON(!system_supports_fpsimd())) return; - local_bh_disable(); + get_cpu_fpsimd_context(); - fpsimd_load_state(state); - if (test_and_clear_thread_flag(TIF_FOREIGN_FPSTATE)) { - struct fpsimd_state *st = ¤t->thread.fpsimd_state; + current->thread.uw.fpsimd_state = *state; + if (test_thread_flag(TIF_SVE)) + fpsimd_to_sve(current); - __this_cpu_write(fpsimd_last_state, st); - st->cpu = smp_processor_id(); - } + task_fpsimd_load(); + fpsimd_bind_task_to_cpu(); - local_bh_enable(); + clear_thread_flag(TIF_FOREIGN_FPSTATE); + + put_cpu_fpsimd_context(); } /* * Invalidate live CPU copies of task t's FPSIMD state + * + * This function may be called with preemption enabled. The barrier() + * ensures that the assignment to fpsimd_cpu is visible to any + * preemption/softirq that could race with set_tsk_thread_flag(), so + * that TIF_FOREIGN_FPSTATE cannot be spuriously re-cleared. + * + * The final barrier ensures that TIF_FOREIGN_FPSTATE is seen set by any + * subsequent code. */ void fpsimd_flush_task_state(struct task_struct *t) { - t->thread.fpsimd_state.cpu = NR_CPUS; + t->thread.fpsimd_cpu = NR_CPUS; + /* + * If we don't support fpsimd, bail out after we have + * reset the fpsimd_cpu for this task and clear the + * FPSTATE. + */ + if (!system_supports_fpsimd()) + return; + barrier(); + set_tsk_thread_flag(t, TIF_FOREIGN_FPSTATE); + + barrier(); } -#ifdef CONFIG_KERNEL_MODE_NEON +/* + * Invalidate any task's FPSIMD state that is present on this cpu. + * The FPSIMD context should be acquired with get_cpu_fpsimd_context() + * before calling this function. + */ +static void fpsimd_flush_cpu_state(void) +{ + WARN_ON(!system_supports_fpsimd()); + __this_cpu_write(fpsimd_last_state.st, NULL); -DEFINE_PER_CPU(bool, kernel_neon_busy); -EXPORT_PER_CPU_SYMBOL(kernel_neon_busy); + /* + * Leaving streaming mode enabled will cause issues for any kernel + * NEON and leaving streaming mode or ZA enabled may increase power + * consumption. + */ + if (system_supports_sme()) + sme_smstop(); + + set_thread_flag(TIF_FOREIGN_FPSTATE); +} + +/* + * Save the FPSIMD state to memory and invalidate cpu view. + * This function must be called with preemption disabled. + */ +void fpsimd_save_and_flush_cpu_state(void) +{ + if (!system_supports_fpsimd()) + return; + WARN_ON(preemptible()); + __get_cpu_fpsimd_context(); + fpsimd_save(); + fpsimd_flush_cpu_state(); + __put_cpu_fpsimd_context(); +} + +#ifdef CONFIG_KERNEL_MODE_NEON /* * Kernel-side NEON support functions @@ -281,20 +1830,13 @@ void kernel_neon_begin(void) BUG_ON(!may_use_simd()); - local_bh_disable(); - - __this_cpu_write(kernel_neon_busy, true); + get_cpu_fpsimd_context(); - /* Save unsaved task fpsimd state, if any: */ - if (current->mm && !test_and_set_thread_flag(TIF_FOREIGN_FPSTATE)) - fpsimd_save_state(¤t->thread.fpsimd_state); + /* Save unsaved fpsimd state, if any: */ + fpsimd_save(); /* Invalidate any task state remaining in the fpsimd regs: */ - __this_cpu_write(fpsimd_last_state, NULL); - - preempt_disable(); - - local_bh_enable(); + fpsimd_flush_cpu_state(); } EXPORT_SYMBOL(kernel_neon_begin); @@ -309,22 +1851,19 @@ EXPORT_SYMBOL(kernel_neon_begin); */ void kernel_neon_end(void) { - bool busy; - if (!system_supports_fpsimd()) return; - busy = __this_cpu_xchg(kernel_neon_busy, false); - WARN_ON(!busy); /* No matching kernel_neon_begin()? */ - - preempt_enable(); + put_cpu_fpsimd_context(); } EXPORT_SYMBOL(kernel_neon_end); #ifdef CONFIG_EFI -static DEFINE_PER_CPU(struct fpsimd_state, efi_fpsimd_state); +static DEFINE_PER_CPU(struct user_fpsimd_state, efi_fpsimd_state); static DEFINE_PER_CPU(bool, efi_fpsimd_state_used); +static DEFINE_PER_CPU(bool, efi_sve_state_used); +static DEFINE_PER_CPU(bool, efi_sm_state); /* * EFI runtime services support functions @@ -350,10 +1889,46 @@ void __efi_fpsimd_begin(void) WARN_ON(preemptible()); - if (may_use_simd()) + if (may_use_simd()) { kernel_neon_begin(); - else { - fpsimd_save_state(this_cpu_ptr(&efi_fpsimd_state)); + } else { + /* + * If !efi_sve_state, SVE can't be in use yet and doesn't need + * preserving: + */ + if (system_supports_sve() && likely(efi_sve_state)) { + char *sve_state = this_cpu_ptr(efi_sve_state); + bool ffr = true; + u64 svcr; + + __this_cpu_write(efi_sve_state_used, true); + + if (system_supports_sme()) { + svcr = read_sysreg_s(SYS_SVCR); + + __this_cpu_write(efi_sm_state, + svcr & SVCR_SM_MASK); + + /* + * Unless we have FA64 FFR does not + * exist in streaming mode. + */ + if (!system_supports_fa64()) + ffr = !(svcr & SVCR_SM_MASK); + } + + sve_save_state(sve_state + sve_ffr_offset(sve_max_vl()), + &this_cpu_ptr(&efi_fpsimd_state)->fpsr, + ffr); + + if (system_supports_sme()) + sysreg_clear_set_s(SYS_SVCR, + SVCR_SM_MASK, 0); + + } else { + fpsimd_save_state(this_cpu_ptr(&efi_fpsimd_state)); + } + __this_cpu_write(efi_fpsimd_state_used, true); } } @@ -366,10 +1941,43 @@ void __efi_fpsimd_end(void) if (!system_supports_fpsimd()) return; - if (__this_cpu_xchg(efi_fpsimd_state_used, false)) - fpsimd_load_state(this_cpu_ptr(&efi_fpsimd_state)); - else + if (!__this_cpu_xchg(efi_fpsimd_state_used, false)) { kernel_neon_end(); + } else { + if (system_supports_sve() && + likely(__this_cpu_read(efi_sve_state_used))) { + char const *sve_state = this_cpu_ptr(efi_sve_state); + bool ffr = true; + + /* + * Restore streaming mode; EFI calls are + * normal function calls so should not return in + * streaming mode. + */ + if (system_supports_sme()) { + if (__this_cpu_read(efi_sm_state)) { + sysreg_clear_set_s(SYS_SVCR, + 0, + SVCR_SM_MASK); + + /* + * Unless we have FA64 FFR does not + * exist in streaming mode. + */ + if (!system_supports_fa64()) + ffr = false; + } + } + + sve_load_state(sve_state + sve_ffr_offset(sve_max_vl()), + &this_cpu_ptr(&efi_fpsimd_state)->fpsr, + ffr); + + __this_cpu_write(efi_sve_state_used, false); + } else { + fpsimd_load_state(this_cpu_ptr(&efi_fpsimd_state)); + } + } } #endif /* CONFIG_EFI */ @@ -382,13 +1990,9 @@ static int fpsimd_cpu_pm_notifier(struct notifier_block *self, { switch (cmd) { case CPU_PM_ENTER: - if (current->mm && !test_thread_flag(TIF_FOREIGN_FPSTATE)) - fpsimd_save_state(¤t->thread.fpsimd_state); - this_cpu_write(fpsimd_last_state, NULL); + fpsimd_save_and_flush_cpu_state(); break; case CPU_PM_EXIT: - if (current->mm) - set_thread_flag(TIF_FOREIGN_FPSTATE); break; case CPU_PM_ENTER_FAILED: default: @@ -413,7 +2017,7 @@ static inline void fpsimd_pm_init(void) { } #ifdef CONFIG_HOTPLUG_CPU static int fpsimd_cpu_dead(unsigned int cpu) { - per_cpu(fpsimd_last_state, cpu) = NULL; + per_cpu(fpsimd_last_state.st, cpu) = NULL; return 0; } @@ -432,16 +2036,23 @@ static inline void fpsimd_hotplug_init(void) { } */ static int __init fpsimd_init(void) { - if (elf_hwcap & HWCAP_FP) { + if (cpu_have_named_feature(FP)) { fpsimd_pm_init(); fpsimd_hotplug_init(); } else { pr_notice("Floating-point is not implemented\n"); } - if (!(elf_hwcap & HWCAP_ASIMD)) + if (!cpu_have_named_feature(ASIMD)) pr_notice("Advanced SIMD is not implemented\n"); + + if (cpu_have_named_feature(SME) && !cpu_have_named_feature(SVE)) + pr_notice("SME is implemented but not SVE\n"); + + sve_sysctl_init(); + sme_sysctl_init(); + return 0; } core_initcall(fpsimd_init); |