diff options
Diffstat (limited to 'arch/arm64')
416 files changed, 22697 insertions, 6507 deletions
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index f39568b28ec1..5656e7aacd69 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -73,6 +73,8 @@ config ARM64 select ARCH_SUPPORTS_DEBUG_PAGEALLOC select ARCH_SUPPORTS_MEMORY_FAILURE select ARCH_SUPPORTS_SHADOW_CALL_STACK if CC_HAVE_SHADOW_CALL_STACK + select ARCH_SUPPORTS_LTO_CLANG if CPU_LITTLE_ENDIAN + select ARCH_SUPPORTS_LTO_CLANG_THIN select ARCH_SUPPORTS_ATOMIC_RMW select ARCH_SUPPORTS_INT128 if CC_HAS_INT128 && (GCC_VERSION >= 50000 || CC_IS_CLANG) select ARCH_SUPPORTS_NUMA_BALANCING @@ -138,6 +140,7 @@ config ARM64 select HAVE_ARCH_KASAN if !(ARM64_16K_PAGES && ARM64_VA_BITS_48) select HAVE_ARCH_KASAN_SW_TAGS if HAVE_ARCH_KASAN select HAVE_ARCH_KASAN_HW_TAGS if (HAVE_ARCH_KASAN && ARM64_MTE) + select HAVE_ARCH_KFENCE select HAVE_ARCH_KGDB select HAVE_ARCH_MMAP_RND_BITS select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT @@ -162,6 +165,8 @@ config ARM64 select HAVE_DYNAMIC_FTRACE select HAVE_DYNAMIC_FTRACE_WITH_REGS \ if $(cc-option,-fpatchable-function-entry=2) + select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY \ + if DYNAMIC_FTRACE_WITH_REGS select HAVE_EFFICIENT_UNALIGNED_ACCESS select HAVE_FAST_GUP select HAVE_FTRACE_MCOUNT_RECORD @@ -522,7 +527,7 @@ config ARM64_ERRATUM_1024718 help This option adds a workaround for ARM Cortex-A55 Erratum 1024718. - Affected Cortex-A55 cores (r0p0, r0p1, r1p0) could cause incorrect + Affected Cortex-A55 cores (all revisions) could cause incorrect update of the hardware dirty bit when the DBM/AP bits are updated without a break-before-make. The workaround is to disable the usage of hardware DBM locally on the affected cores. CPUs not affected by @@ -952,8 +957,9 @@ choice that is selected here. config CPU_BIG_ENDIAN - bool "Build big-endian kernel" - help + bool "Build big-endian kernel" + depends on !LD_IS_LLD || LLD_VERSION >= 130000 + help Say Y if you plan on running a kernel with a big-endian userspace. config CPU_LITTLE_ENDIAN @@ -993,6 +999,7 @@ config HOTPLUG_CPU # Common NUMA Features config NUMA bool "NUMA Memory Allocation and Scheduler Support" + select GENERIC_ARCH_NUMA select ACPI_NUMA if ACPI select OF_NUMA help @@ -1048,8 +1055,6 @@ config HW_PERF_EVENTS config SYS_SUPPORTS_HUGETLBFS def_bool y -config ARCH_WANT_HUGE_PMD_SHARE - config ARCH_HAS_CACHE_LINE_SIZE def_bool y @@ -1132,6 +1137,10 @@ config CRASH_DUMP For more details see Documentation/admin-guide/kdump/kdump.rst +config TRANS_TABLE + def_bool y + depends on HIBERNATION + config XEN_DOM0 def_bool y depends on XEN @@ -1146,8 +1155,8 @@ config XEN config FORCE_MAX_ZONEORDER int - default "14" if (ARM64_64K_PAGES && TRANSPARENT_HUGEPAGE) - default "12" if (ARM64_16K_PAGES && TRANSPARENT_HUGEPAGE) + default "14" if ARM64_64K_PAGES + default "12" if ARM64_16K_PAGES default "11" help The kernel memory allocator divides physically contiguous memory @@ -1213,7 +1222,6 @@ config ARM64_TAGGED_ADDR_ABI menuconfig COMPAT bool "Kernel support for 32-bit EL0" depends on ARM64_4K_PAGES || EXPERT - select COMPAT_BINFMT_ELF if BINFMT_ELF select HAVE_UID16 select OLD_SIGSUSPEND3 select COMPAT_OLD_SIGACTION @@ -1477,7 +1485,7 @@ config ARM64_PTR_AUTH depends on (CC_HAS_SIGN_RETURN_ADDRESS || CC_HAS_BRANCH_PROT_PAC_RET) && AS_HAS_PAC # Modern compilers insert a .note.gnu.property section note for PAC # which is only understood by binutils starting with version 2.33.1. - depends on LD_IS_LLD || LD_VERSION >= 233010000 || (CC_IS_GCC && GCC_VERSION < 90100) + depends on LD_IS_LLD || LD_VERSION >= 23301 || (CC_IS_GCC && GCC_VERSION < 90100) depends on !CC_IS_CLANG || AS_HAS_CFI_NEGATE_RA_STATE depends on (!FUNCTION_GRAPH_TRACER || DYNAMIC_FTRACE_WITH_REGS) help @@ -1845,12 +1853,6 @@ config CMDLINE_FROM_BOOTLOADER the boot loader doesn't provide any, the default kernel command string provided in CMDLINE will be used. -config CMDLINE_EXTEND - bool "Extend bootloader kernel arguments" - help - The command-line arguments provided by the boot loader will be - appended to the default kernel command string. - config CMDLINE_FORCE bool "Always use the default kernel command string" help diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 6eecdef538bd..cdfd5fed457f 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -13,10 +13,17 @@ config ARCH_AGILEX help This enables support for Intel's Agilex SoCFPGA Family. +config ARCH_N5X + bool "Intel's eASIC N5X SoCFPGA Family" + help + This enables support for Intel's eASIC N5X SoCFPGA Family. + config ARCH_SUNXI bool "Allwinner sunxi 64-bit SoC Family" select ARCH_HAS_RESET_CONTROLLER select GENERIC_IRQ_CHIP + select IRQ_DOMAIN_HIERARCHY + select IRQ_FASTEOI_HIERARCHY_HANDLERS select PINCTRL select RESET_CONTROLLER help @@ -39,6 +46,7 @@ config ARCH_BCM2835 select ARM_AMBA select ARM_GIC select ARM_TIMER_SP804 + select BRCMSTB_L2_IRQ help This enables support for the Broadcom BCM2837 and BCM2711 SoC. These SoCs are used in the Raspberry Pi 3 and 4 devices. @@ -317,12 +325,6 @@ config ARCH_XGENE help This enables support for AppliedMicro X-Gene SOC Family -config ARCH_ZX - bool "ZTE ZX SoC Family" - select PINCTRL - help - This enables support for ZTE ZX SoC Family - config ARCH_ZYNQMP bool "Xilinx ZynqMP Family" help diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index 90309208bb28..5b84aec31ed3 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -188,10 +188,12 @@ ifeq ($(KBUILD_EXTMOD),) # this hack. prepare: vdso_prepare vdso_prepare: prepare0 - $(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso include/generated/vdso-offsets.h - $(if $(CONFIG_COMPAT_VDSO),$(Q)$(MAKE) \ - $(build)=arch/arm64/kernel/vdso32 \ - include/generated/vdso32-offsets.h) + $(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso \ + include/generated/vdso-offsets.h arch/arm64/kernel/vdso/vdso.so +ifdef CONFIG_COMPAT_VDSO + $(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso32 \ + include/generated/vdso32-offsets.h arch/arm64/kernel/vdso32/vdso.so +endif endif define archhelp diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 9b1170658d60..f1173cd93594 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -29,4 +29,3 @@ subdir-y += synaptics subdir-y += ti subdir-y += toshiba subdir-y += xilinx -subdir-y += zte diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 211d1e9d4701..41ce680e5f8d 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -13,6 +13,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.0.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.1.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab-early-adopter.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a100-allwinner-perf1.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts index e5e840b9fbb4..f7fe9fa50cb3 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts @@ -36,18 +36,18 @@ leds { compatible = "gpio-leds"; - pwr-led { + led-0 { label = "bananapi-m64:red:pwr"; gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ default-state = "on"; }; - green { + led-1 { label = "bananapi-m64:green:user"; gpios = <&pio 4 14 GPIO_ACTIVE_HIGH>; /* PE14 */ }; - blue { + led-2 { label = "bananapi-m64:blue:user"; gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */ }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts index e58db8a6cab6..09b3c7fb82c0 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts @@ -35,7 +35,7 @@ leds { compatible = "gpio-leds"; - blue { + led { label = "nanopi-a64:blue:status"; gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts index 302e24be0a31..437ffe3628a5 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts @@ -1,10 +1,21 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) // Copyright (c) 2018 ARM Ltd. +#include <dt-bindings/leds/common.h> #include "sun50i-a64-sopine-baseboard.dts" / { model = "Pine64 LTS"; compatible = "pine64,pine64-lts", "allwinner,sun50i-r18", "allwinner,sun50i-a64"; + + leds { + compatible = "gpio-leds"; + + led { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + }; + }; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts index 896f34fd9fc3..7ae16541d14f 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts @@ -126,8 +126,6 @@ }; &ehci0 { - phys = <&usbphy 0>; - phy-names = "usb"; status = "okay"; }; @@ -169,6 +167,7 @@ pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>; vmmc-supply = <®_dcdc1>; vqmmc-supply = <®_eldo1>; + max-frequency = <200000000>; bus-width = <8>; non-removable; cap-mmc-hw-reset; @@ -177,8 +176,6 @@ }; &ohci0 { - phys = <&usbphy 0>; - phy-names = "usb"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts index 3d5a2ae9aa39..fb65319a3bd3 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts @@ -7,7 +7,7 @@ / { model = "Pine64 PinePhone Developer Batch (1.0)"; - compatible = "pine64,pinephone-1.0", "allwinner,sun50i-a64"; + compatible = "pine64,pinephone-1.0", "pine64,pinephone", "allwinner,sun50i-a64"; }; &sgm3140 { diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts index c9b9f6e9ee8c..5e59d3752178 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts @@ -7,7 +7,7 @@ / { model = "Pine64 PinePhone Braveheart (1.1)"; - compatible = "pine64,pinephone-1.1", "allwinner,sun50i-a64"; + compatible = "pine64,pinephone-1.1", "pine64,pinephone", "allwinner,sun50i-a64"; }; &backlight { diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts index acc0ab53b9c1..4e7e237cb46a 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts @@ -7,7 +7,7 @@ / { model = "Pine64 PinePhone (1.2)"; - compatible = "pine64,pinephone-1.2", "allwinner,sun50i-a64"; + compatible = "pine64,pinephone-1.2", "pine64,pinephone", "allwinner,sun50i-a64"; wifi_pwrseq: wifi-pwrseq { compatible = "mmc-pwrseq-simple"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi index 2dfe9bae8c67..9f69d489a81d 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi @@ -21,6 +21,7 @@ compatible = "pwm-backlight"; pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>; enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ + power-supply = <®_ps>; /* Backlight configuration differs per PinePhone revision. */ }; @@ -31,25 +32,33 @@ leds { compatible = "gpio-leds"; - blue { + led-0 { function = LED_FUNCTION_INDICATOR; color = <LED_COLOR_ID_BLUE>; gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */ }; - green { + led-1 { function = LED_FUNCTION_INDICATOR; color = <LED_COLOR_ID_GREEN>; gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */ }; - red { + led-2 { function = LED_FUNCTION_INDICATOR; color = <LED_COLOR_ID_RED>; gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */ }; }; + reg_ps: ps-regulator { + compatible = "regulator-fixed"; + regulator-name = "ps"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + reg_vbat_wifi: vbat-wifi { compatible = "regulator-fixed"; regulator-min-microvolt = <3300000>; @@ -174,8 +183,6 @@ reg = <0x48>; interrupt-parent = <&pio>; interrupts = <1 0 IRQ_TYPE_EDGE_FALLING>; /* PB0 */ - vdd-supply = <®_ldo_io0>; - leda-supply = <®_dldo1>; }; /* Accelerometer/gyroscope */ @@ -196,6 +203,7 @@ &lradc { vref-supply = <®_aldo3>; + wakeup-source; status = "okay"; button-200 { diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab-early-adopter.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab-early-adopter.dts new file mode 100644 index 000000000000..6265360ce623 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab-early-adopter.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2020 Icenowy Zheng <icenowy@aosc.io> + * + */ + +/dts-v1/; + +#include "sun50i-a64-pinetab.dts" + +/ { + model = "PineTab, Early Adopter's version"; + compatible = "pine64,pinetab-early-adopter", "allwinner,sun50i-a64"; +}; + +&dsi { + /delete-node/ panel@0; + + panel@0 { + compatible = "feixin,k101-im2byl02", "ilitek,ili9881c"; + reg = <0>; + power-supply = <®_dc1sw>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ + backlight = <&backlight>; + }; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts index 0494bfaf2ffa..422a8507f674 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts @@ -14,7 +14,7 @@ #include <dt-bindings/pwm/pwm.h> / { - model = "PineTab"; + model = "PineTab, Development Sample"; compatible = "pine64,pinetab", "allwinner,sun50i-a64"; aliases { diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts index d4069749d721..e22b94c83647 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts @@ -111,6 +111,7 @@ bus-width = <8>; non-removable; cap-mmc-hw-reset; + mmc-hs200-1_8v; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi index c48692b06e1f..3402cec87035 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi @@ -32,7 +32,6 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; - non-removable; disable-wp; bus-width = <4>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts index a1864a89fb89..f0a16f355e27 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts @@ -52,12 +52,12 @@ leds { compatible = "gpio-leds"; - capslock { + led-0 { label = "teres-i:green:capslock"; gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */ }; - numlock { + led-1 { label = "teres-i:green:numlock"; gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */ }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 51cc30e84e26..57786fc120c3 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -514,7 +514,7 @@ resets = <&ccu RST_BUS_MMC2>; reset-names = "ahb"; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; - max-frequency = <200000000>; + max-frequency = <150000000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -593,6 +593,8 @@ <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_BUS_OHCI0>, <&ccu RST_BUS_EHCI0>; + phys = <&usbphy 0>; + phy-names = "usb"; status = "disabled"; }; @@ -603,6 +605,8 @@ clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_BUS_OHCI0>; + phys = <&usbphy 0>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts index 9d93fe153689..4c3921ac236c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts @@ -25,13 +25,13 @@ leds { compatible = "gpio-leds"; - pwr { + led-0 { label = "nanopi:green:pwr"; gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - status { + led-1 { label = "nanopi:red:status"; gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts index b059e20813bd..02f8e72f0cad 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts @@ -22,13 +22,13 @@ leds { compatible = "gpio-leds"; - pwr { + led-0 { label = "nanopi:green:pwr"; gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - status { + led-1 { label = "nanopi:blue:status"; gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts index 8bf2db9dcbda..1010c1b22d2e 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts @@ -42,13 +42,13 @@ leds { compatible = "gpio-leds"; - pwr { + led-0 { label = "orangepi:green:pwr"; gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - status { + led-1 { label = "orangepi:red:status"; gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts index 33ab44072e6d..74e0444af19b 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts @@ -36,13 +36,13 @@ leds { compatible = "gpio-leds"; - pwr { + led-0 { label = "orangepi:green:pwr"; gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - status { + led-1 { label = "orangepi:red:status"; gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts index ef5ca6444220..d13980ed7a79 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts @@ -33,13 +33,13 @@ leds { compatible = "gpio-leds"; - pwr { + led-0 { label = "orangepi:green:pwr"; gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */ default-state = "on"; }; - status { + led-1 { label = "orangepi:red:status"; gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */ }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts index de19e68eb84e..22530ace12d5 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts @@ -33,13 +33,13 @@ leds { compatible = "gpio-leds"; - pwr { + led-0 { label = "orangepi:green:pwr"; gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - status { + led-1 { label = "orangepi:red:status"; gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi index 10489e508695..578a63dedf46 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi @@ -121,6 +121,19 @@ resets = <&ccu RST_BUS_CE>; }; + deinterlace: deinterlace@1e00000 { + compatible = "allwinner,sun8i-h3-deinterlace"; + reg = <0x01e00000 0x20000>; + clocks = <&ccu CLK_BUS_DEINTERLACE>, + <&ccu CLK_DEINTERLACE>, + <&ccu CLK_DRAM_DEINTERLACE>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_DEINTERLACE>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&mbus 9>; + interconnect-names = "dma-mem"; + }; + mali: gpu@1e80000 { compatible = "allwinner,sun50i-h5-mali", "arm,mali-450"; reg = <0x01e80000 0x30000>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts index 7c9dbde645b5..4f4755152fce 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts @@ -43,7 +43,7 @@ leds { compatible = "gpio-leds"; - power { + led { label = "beelink:white:power"; gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ default-state = "on"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi index 1a5eddc5a40f..8c6e8536b69f 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi @@ -8,7 +8,7 @@ nvmem-cells = <&cpu_speed_grade>; opp-shared; - opp@480000000 { + opp-480000000 { clock-latency-ns = <244144>; /* 8 32k periods */ opp-hz = /bits/ 64 <480000000>; @@ -17,7 +17,7 @@ opp-microvolt-speed2 = <820000 820000 1200000>; }; - opp@720000000 { + opp-720000000 { clock-latency-ns = <244144>; /* 8 32k periods */ opp-hz = /bits/ 64 <720000000>; @@ -26,7 +26,7 @@ opp-microvolt-speed2 = <820000 820000 1200000>; }; - opp@816000000 { + opp-816000000 { clock-latency-ns = <244144>; /* 8 32k periods */ opp-hz = /bits/ 64 <816000000>; @@ -35,7 +35,7 @@ opp-microvolt-speed2 = <820000 820000 1200000>; }; - opp@888000000 { + opp-888000000 { clock-latency-ns = <244144>; /* 8 32k periods */ opp-hz = /bits/ 64 <888000000>; @@ -44,7 +44,7 @@ opp-microvolt-speed2 = <820000 820000 1200000>; }; - opp@1080000000 { + opp-1080000000 { clock-latency-ns = <244144>; /* 8 32k periods */ opp-hz = /bits/ 64 <1080000000>; @@ -53,7 +53,7 @@ opp-microvolt-speed2 = <880000 880000 1200000>; }; - opp@1320000000 { + opp-1320000000 { clock-latency-ns = <244144>; /* 8 32k periods */ opp-hz = /bits/ 64 <1320000000>; @@ -62,7 +62,7 @@ opp-microvolt-speed2 = <940000 940000 1200000>; }; - opp@1488000000 { + opp-1488000000 { clock-latency-ns = <244144>; /* 8 32k periods */ opp-hz = /bits/ 64 <1488000000>; @@ -71,7 +71,7 @@ opp-microvolt-speed2 = <1000000 1000000 1200000>; }; - opp@1608000000 { + opp-1608000000 { clock-latency-ns = <244144>; /* 8 32k periods */ opp-hz = /bits/ 64 <1608000000>; @@ -80,7 +80,7 @@ opp-microvolt-speed2 = <1030000 1030000 1200000>; }; - opp@1704000000 { + opp-1704000000 { clock-latency-ns = <244144>; /* 8 32k periods */ opp-hz = /bits/ 64 <1704000000>; @@ -89,7 +89,7 @@ opp-microvolt-speed2 = <1060000 1060000 1200000>; }; - opp@1800000000 { + opp-1800000000 { clock-latency-ns = <244144>; /* 8 32k periods */ opp-hz = /bits/ 64 <1800000000>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts index 15c9dd8c4479..7e83f6146f8a 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts @@ -43,13 +43,13 @@ leds { compatible = "gpio-leds"; - power { + led-0 { label = "orangepi:red:power"; gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ default-state = "on"; }; - status { + led-1 { label = "orangepi:green:status"; gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi index ebc120a9232f..da0875bd38d4 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi @@ -42,13 +42,13 @@ leds { compatible = "gpio-leds"; - power { + led-0 { label = "orangepi:red:power"; gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ default-state = "on"; }; - status { + led-1 { label = "orangepi:green:status"; gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts index 7fea1e4e2d49..686f58e77004 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts @@ -34,3 +34,18 @@ non-removable; status = "okay"; }; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "realtek,rtl8723bs-bt"; + device-wake-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */ + host-wake-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */ + enable-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */ + max-speed = <1500000>; + }; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts index 961732c52aa0..b868ad17af8f 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts @@ -44,17 +44,17 @@ leds { compatible = "gpio-leds"; - heartbeat { + led-0 { label = "pine-h64:green:heartbeat"; gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ }; - link { + led-1 { label = "pine-h64:white:link"; gpios = <&r_pio 0 3 GPIO_ACTIVE_HIGH>; /* PL3 */ }; - status { + led-2 { label = "pine-h64:blue:status"; gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ }; @@ -142,6 +142,7 @@ vqmmc-supply = <®_bldo2>; non-removable; cap-mmc-hw-reset; + mmc-hs200-1_8v; bus-width = <8>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index 8a62a9fbe347..49e979794094 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -436,6 +436,7 @@ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; + max-frequency = <150000000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -452,6 +453,7 @@ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; + max-frequency = <150000000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -468,6 +470,7 @@ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; + max-frequency = <150000000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -680,6 +683,8 @@ <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_BUS_OHCI0>, <&ccu RST_BUS_EHCI0>; + phys = <&usb2phy 0>; + phy-names = "usb"; status = "disabled"; }; @@ -690,6 +695,8 @@ clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_BUS_OHCI0>; + phys = <&usb2phy 0>; + phy-names = "usb"; status = "disabled"; }; @@ -949,6 +956,11 @@ pins = "PL9"; function = "s_cir_rx"; }; + + r_rsb_pins: r-rsb-pins { + pins = "PL0", "PL1"; + function = "s_rsb"; + }; }; r_ir: ir@7040000 { @@ -979,6 +991,20 @@ #size-cells = <0>; }; + r_rsb: rsb@7083000 { + compatible = "allwinner,sun8i-a23-rsb"; + reg = <0x07083000 0x400>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu 13>; + clock-frequency = <3000000>; + resets = <&r_ccu 7>; + pinctrl-names = "default"; + pinctrl-0 = <&r_rsb_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + ths: thermal-sensor@5070400 { compatible = "allwinner,sun50i-h6-ths"; reg = <0x05070400 0x100>; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index 0f893984c256..d301ac0d406b 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -203,7 +203,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <24>; + ngpios = <24>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -223,7 +223,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <24>; + ngpios = <24>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index ced03946314f..78a569d7fa20 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gsking-x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb @@ -44,7 +45,8 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb -dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts index b00d0468c753..81269ccc2496 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts @@ -181,7 +181,7 @@ sound { compatible = "amlogic,axg-sound-card"; - model = "G12A-SEI510"; + model = "SEI510"; audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmin_a>, <&tdmin_b>; audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts index 463a72d6bb7c..579f3d02d613 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts @@ -150,7 +150,7 @@ sound { compatible = "amlogic,axg-sound-card"; - model = "G12A-X96-MAX"; + model = "X96-MAX"; audio-aux-devs = <&tdmout_b>; audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", "TDMOUT_B IN 1", "FRDDR_B OUT 1", diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts new file mode 100644 index 000000000000..211191f66344 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts @@ -0,0 +1,133 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-g12b-w400.dtsi" +#include <dt-bindings/leds/common.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + compatible = "azw,gsking-x", "amlogic,g12b"; + model = "Beelink GS-King X"; + + aliases { + rtc0 = &rtc; + rtc1 = &vrtc; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + power-button { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; + }; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "GSKING-X"; + audio-aux-devs = <&tdmout_a>; + audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 1", + "TDMOUT_A IN 1", "FRDDR_B OUT 1", + "TDMOUT_A IN 2", "FRDDR_C OUT 1", + "TDM_A Playback", "TDMOUT_A OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_a>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; + }; + }; + + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; + pinctrl-names = "default"; + + rtc: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + wakeup-source; + }; +}; + +&tdmif_a { + status = "okay"; +}; + +&tdmout_a { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts index 0e5c500fb78f..0e331aa5a2d7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts @@ -44,7 +44,7 @@ sound { compatible = "amlogic,axg-sound-card"; - model = "G12B-GTKING-PRO"; + model = "GTKING-PRO"; audio-aux-devs = <&tdmout_b>; audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", "TDMOUT_B IN 1", "FRDDR_B OUT 1", diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts index 10b87eb97b14..a7db84a500bb 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts @@ -28,7 +28,7 @@ sound { compatible = "amlogic,axg-sound-card"; - model = "G12B-GTKING"; + model = "GTKING"; audio-aux-devs = <&tdmout_b>; audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", "TDMOUT_B IN 1", "FRDDR_B OUT 1", diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi index 39a09661c5f6..58ce569b2ace 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi @@ -13,6 +13,8 @@ aliases { serial0 = &uart_AO; ethernet0 = ðmac; + rtc0 = &rtc; + rtc1 = &vrtc; }; dioo2133: audio-amplifier-0 { @@ -211,7 +213,7 @@ sound { compatible = "amlogic,axg-sound-card"; - model = "G12B-ODROID-N2"; + model = "ODROID-N2"; audio-widgets = "Line", "Lineout"; audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>, <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>, @@ -478,6 +480,18 @@ linux,rc-map-name = "rc-odroid"; }; +&i2c3 { + status = "okay"; + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; + pinctrl-names = "default"; + + rtc: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + wakeup-source; + }; +}; + &pwm_ab { pinctrl-0 = <&pwm_a_e_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts index b57bb0befc69..0c7892600d56 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts @@ -23,7 +23,7 @@ sound { compatible = "amlogic,axg-sound-card"; - model = "G12B-UGOOS-AM6"; + model = "UGOOS-AM6"; audio-aux-devs = <&tdmout_b>; audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", "TDMOUT_B IN 1", "FRDDR_B OUT 1", diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi index c2480bab8d33..2d7032f41e4b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi @@ -186,7 +186,7 @@ sound { compatible = "amlogic,gx-sound-card"; - model = "GXL-LIBRETECH-S9XX-PC"; + model = "LIBRETECH-PC"; audio-aux-devs = <&dio2133>; audio-widgets = "Speaker", "7J4-14 LEFT", "Speaker", "7J4-11 RIGHT"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index 6b57e15aade3..dafc841f7c16 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -121,7 +121,7 @@ sound { compatible = "amlogic,gx-sound-card"; - model = "GX-P230-Q200"; + model = "P230-Q200"; audio-aux-devs = <&dio2133>; audio-widgets = "Line", "Lineout"; audio-routing = "AU2 INL", "ACODEC LOLP", diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts index 089e0636ba8a..7273eed5292c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts @@ -134,7 +134,7 @@ sound { compatible = "amlogic,gx-sound-card"; - model = "GXBB-NANOPI-K2"; + model = "NANOPI-K2"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index b5b11cb9f393..f887bfb445fd 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts @@ -143,7 +143,7 @@ sound { compatible = "amlogic,gx-sound-card"; - model = "GXBB-NEXBOX-A95X"; + model = "NEXBOX-A95X"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index c04ef57f7b3b..bfaf7f41a2d6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -176,7 +176,7 @@ sound { compatible = "amlogic,gx-sound-card"; - model = "GXBB-ODROID-C2"; + model = "ODROID-C2"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts index 0c1570153842..58733017eda8 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts @@ -15,7 +15,7 @@ sound { compatible = "amlogic,gx-sound-card"; - model = "GXBB-WETEK-HUB"; + model = "WETEK-HUB"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts index f2562c7de67c..6eae692792ec 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts @@ -50,7 +50,7 @@ sound { compatible = "amlogic,gx-sound-card"; - model = "GXBB-WETEK-PLAY2"; + model = "WETEK-PLAY2"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts index 9e43f4dca90d..2d769203f671 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts @@ -118,7 +118,7 @@ sound { compatible = "amlogic,gx-sound-card"; - model = "GXL-LIBRETECH-S805X-AC"; + model = "LIBRETECH-AC"; audio-widgets = "Speaker", "9J5-3 LEFT", "Speaker", "9J5-2 RIGHT"; audio-routing = "9J5-3 LEFT", "ACODEC LOLN", diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts index 6fe589cd2ba2..60feac0179c0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -42,10 +42,10 @@ }; }; - pwmleds { + led-controller { compatible = "pwm-leds"; - power { + led-1 { label = "vim:red:power"; pwms = <&pwm_AO_ab 1 7812500 0>; max-brightness = <255>; @@ -66,7 +66,7 @@ sound { compatible = "amlogic,gx-sound-card"; - model = "GXL-KHADAS-VIM1"; + model = "KHADAS-VIM"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts index 9a3c08e6e6cc..93d8f8aff70d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts @@ -159,7 +159,7 @@ sound { compatible = "amlogic,gx-sound-card"; - model = "GXL-LIBRETECH-S905X-CC-V2"; + model = "LIBRETECH-CC-V2"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index 5ae7bb6209cb..82bfabfbd39c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -135,7 +135,7 @@ sound { compatible = "amlogic,gx-sound-card"; - model = "GXL-LIBRETECH-S905X-CC"; + model = "LIBRETECH-CC"; audio-aux-devs = <&dio2133>; audio-widgets = "Line", "Lineout"; audio-routing = "AU2 INL", "ACODEC LOLN", diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts index bf9877d33427..18a4b7a6c5df 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts @@ -81,10 +81,10 @@ }; }; - pwmleds { + led-controller { compatible = "pwm-leds"; - power { + led-1 { label = "vim:red:power"; pwms = <&pwm_AO_ab 1 7812500 0>; max-brightness = <255>; @@ -148,7 +148,7 @@ sound { compatible = "amlogic,gx-sound-card"; - model = "GXM-KHADAS-VIM2"; + model = "KHADAS-VIM2"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi index 8f8656262ae7..877e3b989203 100644 --- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi @@ -170,7 +170,7 @@ sound { compatible = "amlogic,axg-sound-card"; - model = "G12B-KHADAS-VIM3"; + model = "KHADAS-VIM3"; audio-aux-devs = <&tdmout_a>; audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", "TDMOUT_A IN 1", "FRDDR_B OUT 0", @@ -283,12 +283,12 @@ }; ðmac { - pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-mode = "rgmii"; - phy-handle = <&external_phy>; - amlogic,tx-delay-ns = <2>; + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; }; &frddr_a { @@ -354,9 +354,9 @@ }; &pwm_ef { - status = "okay"; - pinctrl-0 = <&pwm_e_pins>; - pinctrl-names = "default"; + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; }; &saradc { @@ -450,7 +450,6 @@ }; }; - &tdmif_a { status = "okay"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts index 4b517ca72059..06de0b1ce726 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts @@ -89,13 +89,12 @@ status = "okay"; }; -&sd_emmc_a { - sd-uhs-sdr50; -}; - &usb { phys = <&usb2_phy0>, <&usb2_phy1>; phy-names = "usb2-phy0", "usb2-phy1"; }; */ +&sd_emmc_a { + sd-uhs-sdr50; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts index a712273c905a..b2a4e823c1d8 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts @@ -5,34 +5,12 @@ /dts-v1/; -#include "meson-sm1.dtsi" -#include <dt-bindings/gpio/meson-g12a-gpio.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/sound/meson-g12a-tohdmitx.h> +#include "meson-sm1-odroid.dtsi" / { compatible = "hardkernel,odroid-c4", "amlogic,sm1"; model = "Hardkernel ODROID-C4"; - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - leds { compatible = "gpio-leds"; @@ -45,96 +23,6 @@ }; }; - tflash_vdd: regulator-tflash_vdd { - compatible = "regulator-fixed"; - - regulator-name = "TFLASH_VDD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>; - enable-active-high; - regulator-always-on; - }; - - tf_io: gpio-regulator-tf_io { - compatible = "regulator-gpio"; - - regulator-name = "TF_IO"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio_ao GPIOAO_6 GPIO_ACTIVE_HIGH>; - gpios-states = <0>; - - states = <3300000 0>, - <1800000 1>; - }; - - flash_1v8: regulator-flash_1v8 { - compatible = "regulator-fixed"; - regulator-name = "FLASH_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - main_12v: regulator-main_12v { - compatible = "regulator-fixed"; - regulator-name = "12V"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - }; - - vcc_5v: regulator-vcc_5v { - compatible = "regulator-fixed"; - regulator-name = "5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - vin-supply = <&main_12v>; - }; - - vcc_1v8: regulator-vcc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - /* FIXME: actually controlled by VDDCPU_B_EN */ - }; - - vddcpu: regulator-vddcpu { - /* - * MP8756GD Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU"; - regulator-min-microvolt = <721000>; - regulator-max-microvolt = <1022000>; - - vin-supply = <&main_12v>; - - pwms = <&pwm_AO_cd 1 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - hub_5v: regulator-hub_5v { compatible = "regulator-fixed"; regulator-name = "HUB_5V"; @@ -147,215 +35,12 @@ enable-active-high; }; - usb_pwr_en: regulator-usb_pwr_en { - compatible = "regulator-fixed"; - regulator-name = "USB_PWR_EN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - - /* Connected to the microUSB port power enable */ - gpio = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vddao_1v8: regulator-vddao_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&main_12v>; - regulator-always-on; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - sound { - compatible = "amlogic,axg-sound-card"; - model = "SM1-ODROID-C4"; - audio-aux-devs = <&tdmout_b>; - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", - "TDMOUT_B IN 1", "FRDDR_B OUT 1", - "TDMOUT_B IN 2", "FRDDR_C OUT 1", - "TDM_B Playback", "TDMOUT_B OUT"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - /* 8ch hdmi interface */ - dai-link-3 { - sound-dai = <&tdmif_b>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; - }; - }; - - /* hdmi glue */ - dai-link-4 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - }; -}; - -&arb { - status = "okay"; -}; - -&clkc_audio { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU1_CLK>; - clock-latency = <50000>; -}; - -&cpu2 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU2_CLK>; - clock-latency = <50000>; -}; - -&cpu3 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU3_CLK>; - clock-latency = <50000>; -}; - -&ext_mdio { - external_phy: ethernet-phy@0 { - /* Realtek RTL8211F (0x001cc916) */ - reg = <0>; - max-speed = <1000>; - - interrupt-parent = <&gpio_intc>; - /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + model = "ODROID-C4"; }; }; -ðmac { - pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-mode = "rgmii"; - phy-handle = <&external_phy>; - amlogic,tx-delay-ns = <2>; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - &gpio { - gpio-line-names = - /* GPIOZ */ - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - /* GPIOH */ - "", "", "", "", "", - "PIN_36", /* GPIOH_5 */ - "PIN_26", /* GPIOH_6 */ - "PIN_32", /* GPIOH_7 */ - "", - /* BOOT */ - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - /* GPIOC */ - "", "", "", "", "", "", "", "", - /* GPIOA */ - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", - "PIN_27", /* GPIOA_14 */ - "PIN_28", /* GPIOA_15 */ - /* GPIOX */ - "PIN_16", /* GPIOX_0 */ - "PIN_18", /* GPIOX_1 */ - "PIN_22", /* GPIOX_2 */ - "PIN_11", /* GPIOX_3 */ - "PIN_13", /* GPIOX_4 */ - "PIN_7", /* GPIOX_5 */ - "PIN_33", /* GPIOX_6 */ - "PIN_15", /* GPIOX_7 */ - "PIN_19", /* GPIOX_8 */ - "PIN_21", /* GPIOX_9 */ - "PIN_24", /* GPIOX_10 */ - "PIN_23", /* GPIOX_11 */ - "PIN_8", /* GPIOX_12 */ - "PIN_10", /* GPIOX_13 */ - "PIN_29", /* GPIOX_14 */ - "PIN_31", /* GPIOX_15 */ - "PIN_12", /* GPIOX_16 */ - "PIN_3", /* GPIOX_17 */ - "PIN_5", /* GPIOX_18 */ - "PIN_35"; /* GPIOX_19 */ - /* * WARNING: The USB Hub on the Odroid-C4 needs a reset signal * to be turned high in order to be detected by the USB Controller @@ -370,120 +55,10 @@ }; }; -&gpio_ao { - gpio-line-names = - /* GPIOAO */ - "", "", "", "", - "PIN_47", /* GPIOAO_4 */ - "", "", - "PIN_45", /* GPIOAO_7 */ - "PIN_46", /* GPIOAO_8 */ - "PIN_44", /* GPIOAO_9 */ - "PIN_42", /* GPIOAO_10 */ - "", - /* GPIOE */ - "", "", ""; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; - pinctrl-names = "default"; - hdmi-supply = <&vcc_5v>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - &ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; linux,rc-map-name = "rc-odroid"; }; -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - status = "okay"; -}; - -&saradc { - status = "okay"; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <200000000>; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; - disable-wp; - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&tflash_vdd>; - vqmmc-supply = <&tf_io>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&flash_1v8>; -}; - -&tdmif_b { - status = "okay"; -}; - -&tdmout_b { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - vbus-supply = <&usb_pwr_en>; -}; - -&usb2_phy0 { - phy-supply = <&vcc_5v>; -}; - &usb2_phy1 { /* Enable the hub which is connected to this port */ phy-supply = <&hub_5v>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts new file mode 100644 index 000000000000..bf15700c4b15 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts @@ -0,0 +1,96 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Dongjin Kim <tobetter@gmail.com> + */ + +/dts-v1/; + +#include "meson-sm1-odroid.dtsi" + +/ { + compatible = "hardkernel,odroid-hc4", "amlogic,sm1"; + model = "Hardkernel ODROID-HC4"; + + aliases { + rtc0 = &rtc; + rtc1 = &vrtc; + }; + + fan0: pwm-fan { + compatible = "pwm-fan"; + #cooling-cells = <2>; + cooling-min-state = <0>; + cooling-max-state = <3>; + cooling-levels = <0 120 170 220>; + pwms = <&pwm_cd 1 40000 0>; + }; + + leds { + compatible = "gpio-leds"; + + led-blue { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + panic-indicator; + }; + + led-red { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_POWER; + gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + sound { + model = "ODROID-HC4"; + }; +}; + +&cpu_thermal { + cooling-maps { + map { + trip = <&cpu_passive>; + cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +&ir { + linux,rc-map-name = "rc-odroid"; +}; + +&i2c2 { + status = "okay"; + pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>; + pinctrl-names = "default"; + + rtc: rtc@51 { + status = "okay"; + compatible = "nxp,pcf8563"; + reg = <0x51>; + wakeup-source; + }; +}; + +&pcie { + status = "okay"; + reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>; +}; + +&pwm_cd { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm_d_x6_pins>; +}; + +&sd_emmc_c { + status = "disabled"; +}; + +&usb { + phys = <&usb2_phy0>, <&usb2_phy1>; + phy-names = "usb2-phy0", "usb2-phy1"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi new file mode 100644 index 000000000000..d14716b3d0f1 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi @@ -0,0 +1,442 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Dongjin Kim <tobetter@gmail.com> + */ + +#include "meson-sm1.dtsi" +#include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + tflash_vdd: regulator-tflash_vdd { + compatible = "regulator-fixed"; + + regulator-name = "TFLASH_VDD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>; + enable-active-high; + regulator-always-on; + }; + + tf_io: gpio-regulator-tf_io { + compatible = "regulator-gpio"; + + regulator-name = "TF_IO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio_ao GPIOAO_6 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + + states = <3300000 0>, + <1800000 1>; + }; + + flash_1v8: regulator-flash_1v8 { + compatible = "regulator-fixed"; + regulator-name = "FLASH_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + main_12v: regulator-main_12v { + compatible = "regulator-fixed"; + regulator-name = "12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&main_12v>; + }; + + vcc_1v8: regulator-vcc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + /* FIXME: actually controlled by VDDCPU_B_EN */ + }; + + vddcpu: regulator-vddcpu { + /* + * MP8756GD Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&main_12v>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + usb_pwr_en: regulator-usb_pwr_en { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR_EN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + /* Connected to the microUSB port power enable */ + gpio = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vddao_1v8: regulator-vddao_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&main_12v>; + regulator-always-on; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU1_CLK>; + clock-latency = <50000>; +}; + +&cpu2 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU2_CLK>; + clock-latency = <50000>; +}; + +&cpu3 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU3_CLK>; + clock-latency = <50000>; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&gpio { + gpio-line-names = + /* GPIOZ */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* GPIOH */ + "", "", "", "", "", + "PIN_36", /* GPIOH_5 */ + "PIN_26", /* GPIOH_6 */ + "PIN_32", /* GPIOH_7 */ + "", + /* BOOT */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* GPIOC */ + "", "", "", "", "", "", "", "", + /* GPIOA */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", + "PIN_27", /* GPIOA_14 */ + "PIN_28", /* GPIOA_15 */ + /* GPIOX */ + "PIN_16", /* GPIOX_0 */ + "PIN_18", /* GPIOX_1 */ + "PIN_22", /* GPIOX_2 */ + "PIN_11", /* GPIOX_3 */ + "PIN_13", /* GPIOX_4 */ + "PIN_7", /* GPIOX_5 */ + "PIN_33", /* GPIOX_6 */ + "PIN_15", /* GPIOX_7 */ + "PIN_19", /* GPIOX_8 */ + "PIN_21", /* GPIOX_9 */ + "PIN_24", /* GPIOX_10 */ + "PIN_23", /* GPIOX_11 */ + "PIN_8", /* GPIOX_12 */ + "PIN_10", /* GPIOX_13 */ + "PIN_29", /* GPIOX_14 */ + "PIN_31", /* GPIOX_15 */ + "PIN_12", /* GPIOX_16 */ + "PIN_3", /* GPIOX_17 */ + "PIN_5", /* GPIOX_18 */ + "PIN_35"; /* GPIOX_19 */ +}; + +&gpio_ao { + gpio-line-names = + /* GPIOAO */ + "", "", "", "", + "PIN_47", /* GPIOAO_4 */ + "", "", + "PIN_45", /* GPIOAO_7 */ + "PIN_46", /* GPIOAO_8 */ + "PIN_44", /* GPIOAO_9 */ + "PIN_42", /* GPIOAO_10 */ + "", + /* GPIOE */ + "", "", ""; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +&saradc { + status = "okay"; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <200000000>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&tflash_vdd>; + vqmmc-supply = <&tf_io>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&flash_1v8>; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + vbus-supply = <&usb_pwr_en>; +}; + +&usb2_phy0 { + phy-supply = <&vcc_5v>; +}; + diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts index 5ab139a34c01..2194a778973f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts @@ -101,20 +101,20 @@ }; }; - leds { + led-controller-1 { compatible = "gpio-leds"; - led-bluetooth { + led-1 { label = "sei610:blue:bt"; gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; default-state = "off"; }; }; - pwmleds { + led-controller-2 { compatible = "pwm-leds"; - power { + led-2 { label = "sei610:red:power"; pwms = <&pwm_AO_ab 0 30518 0>; max-brightness = <255>; @@ -220,7 +220,7 @@ sound { compatible = "amlogic,axg-sound-card"; - model = "SM1-SEI610"; + model = "SEI610"; audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmin_a>, <&tdmin_b>; audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile index ef26c23603ce..ebebc0cd421f 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile +++ b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile @@ -1,2 +1,3 @@ # SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts new file mode 100644 index 000000000000..ee3ed612274c --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +#include "bcm4906.dtsi" + +/ { + compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908"; + model = "Netgear R8000P"; + + memory@0 { + device_type = "memory"; + reg = <0x00 0x00 0x00 0x20000000>; + }; + + leds { + compatible = "gpio-leds"; + + wps { + function = LED_FUNCTION_WPS; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&nandcs { + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "cferom"; + reg = <0x0 0x100000>; + }; + + partition@100000 { + label = "firmware"; + reg = <0x100000 0x4400000>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi new file mode 100644 index 000000000000..66023d553524 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "bcm4908.dtsi" + +/ { + cpus { + /delete-node/ cpu@2; + + /delete-node/ cpu@3; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts index 13c6b86eef21..6e4ad66ff536 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts @@ -44,6 +44,57 @@ }; }; +&ports { + port@0 { + label = "lan2"; + }; + + port@1 { + label = "lan1"; + }; + + port@2 { + label = "lan6"; + }; + + port@3 { + label = "lan5"; + }; + + /* External BCM53134S switch */ + port@7 { + label = "sw"; + reg = <7>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; +}; + +&mdio { + /* lan8 */ + ethernet-phy@0 { + reg = <0>; + }; + + /* lan7 */ + ethernet-phy@1 { + reg = <1>; + }; + + /* lan4 */ + ethernet-phy@2 { + reg = <2>; + }; + + /* lan3 */ + ethernet-phy@3 { + reg = <3>; + }; +}; + &nandcs { nand-ecc-strength = <4>; nand-ecc-step-size = <512>; diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi index f873dc44ce9c..9354077f74cd 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi @@ -108,7 +108,7 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x00 0x00 0x80000000 0x10000>; + ranges = <0x00 0x00 0x80000000 0x281000>; usb@c300 { compatible = "generic-ehci"; @@ -130,6 +130,104 @@ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; + + ethernet-switch@80000 { + compatible = "simple-bus"; + #size-cells = <1>; + #address-cells = <1>; + ranges = <0 0x80000 0x50000>; + + ethernet-switch@0 { + compatible = "brcm,bcm4908-switch"; + reg = <0x0 0x40000>, + <0x40000 0x110>, + <0x40340 0x30>, + <0x40380 0x30>, + <0x40600 0x34>, + <0x40800 0x208>; + reg-names = "core", "reg", "intrl2_0", + "intrl2_1", "fcb", "acb"; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + brcm,num-gphy = <5>; + brcm,num-rgmii-ports = <2>; + + #address-cells = <1>; + #size-cells = <0>; + + ports: ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + phy-mode = "internal"; + phy-handle = <&phy8>; + }; + + port@1 { + reg = <1>; + phy-mode = "internal"; + phy-handle = <&phy9>; + }; + + port@2 { + reg = <2>; + phy-mode = "internal"; + phy-handle = <&phy10>; + }; + + port@3 { + reg = <3>; + phy-mode = "internal"; + phy-handle = <&phy11>; + }; + }; + }; + + mdio: mdio@405c0 { + compatible = "brcm,unimac-mdio"; + reg = <0x405c0 0x8>; + reg-names = "mdio"; + #size-cells = <0>; + #address-cells = <1>; + + phy8: ethernet-phy@8 { + reg = <8>; + }; + + phy9: ethernet-phy@9 { + reg = <9>; + }; + + phy10: ethernet-phy@a { + reg = <10>; + }; + + phy11: ethernet-phy@b { + reg = <11>; + }; + + phy12: ethernet-phy@c { + reg = <12>; + }; + }; + }; + + procmon: syscon@280000 { + compatible = "simple-bus"; + reg = <0x280000 0x1000>; + ranges; + + #address-cells = <1>; + #size-cells = <1>; + + power-controller@2800c0 { + compatible = "brcm,bcm4908-pmb"; + reg = <0x2800c0 0x40>; + #power-domain-cells = <1>; + }; + }; }; bus@ff800000 { @@ -164,7 +262,7 @@ nand@1800 { #address-cells = <1>; #size-cells = <0>; - compatible = "brcm,brcmnand-v7.1", "brcm,brcmnand"; + compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand"; reg = <0x1800 0x600>, <0x2000 0x10>; reg-names = "nand", "nand-int-base"; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; @@ -177,6 +275,21 @@ }; }; + misc@2600 { + compatible = "brcm,misc", "simple-mfd"; + reg = <0x2600 0xe4>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x2600 0xe4>; + + reset-controller@2644 { + compatible = "brcm,bcm4908-misc-pcie-reset"; + reg = <0x44 0x04>; + #reset-cells = <1>; + }; + }; + reboot { compatible = "syscon-reboot"; regmap = <&timer>; diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi index 43aa5e9c0020..8fe7325cfbb2 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi @@ -56,70 +56,6 @@ }; }; -&sata0 { - status = "okay"; -}; - -&sata_phy0{ - status = "okay"; -}; - -&sata1 { - status = "okay"; -}; - -&sata_phy1{ - status = "okay"; -}; - -&sata2 { - status = "okay"; -}; - -&sata_phy2{ - status = "okay"; -}; - -&sata3 { - status = "okay"; -}; - -&sata_phy3{ - status = "okay"; -}; - -&sata4 { - status = "okay"; -}; - -&sata_phy4{ - status = "okay"; -}; - -&sata5 { - status = "okay"; -}; - -&sata_phy5{ - status = "okay"; -}; - -&sata6 { - status = "okay"; -}; - -&sata_phy6{ - status = "okay"; -}; - -&sata7 { - status = "okay"; -}; - -&sata_phy7{ - status = "okay"; -}; - &pwm { status = "okay"; }; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi deleted file mode 100644 index 8c68e0c26f1b..000000000000 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi +++ /dev/null @@ -1,278 +0,0 @@ -/* - * BSD LICENSE - * - * Copyright(c) 2016-2017 Broadcom. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Broadcom nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - - sata { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x67d00000 0x00800000>; - - sata0: ahci@0 { - compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x00000000 0x1000>; - reg-names = "ahci"; - interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata0_port0: sata-port@0 { - reg = <0>; - phys = <&sata0_phy0>; - phy-names = "sata-phy"; - }; - }; - - sata_phy0: sata_phy@2100 { - compatible = "brcm,iproc-sr-sata-phy"; - reg = <0x00002100 0x1000>; - reg-names = "phy"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata0_phy0: sata-phy@0 { - reg = <0>; - #phy-cells = <0>; - }; - }; - - sata1: ahci@10000 { - compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x00010000 0x1000>; - reg-names = "ahci"; - interrupts = <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata1_port0: sata-port@0 { - reg = <0>; - phys = <&sata1_phy0>; - phy-names = "sata-phy"; - }; - }; - - sata_phy1: sata_phy@12100 { - compatible = "brcm,iproc-sr-sata-phy"; - reg = <0x00012100 0x1000>; - reg-names = "phy"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata1_phy0: sata-phy@0 { - reg = <0>; - #phy-cells = <0>; - }; - }; - - sata2: ahci@20000 { - compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x00020000 0x1000>; - reg-names = "ahci"; - interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata2_port0: sata-port@0 { - reg = <0>; - phys = <&sata2_phy0>; - phy-names = "sata-phy"; - }; - }; - - sata_phy2: sata_phy@22100 { - compatible = "brcm,iproc-sr-sata-phy"; - reg = <0x00022100 0x1000>; - reg-names = "phy"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata2_phy0: sata-phy@0 { - reg = <0>; - #phy-cells = <0>; - }; - }; - - sata3: ahci@30000 { - compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x00030000 0x1000>; - reg-names = "ahci"; - interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata3_port0: sata-port@0 { - reg = <0>; - phys = <&sata3_phy0>; - phy-names = "sata-phy"; - }; - }; - - sata_phy3: sata_phy@32100 { - compatible = "brcm,iproc-sr-sata-phy"; - reg = <0x00032100 0x1000>; - reg-names = "phy"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata3_phy0: sata-phy@0 { - reg = <0>; - #phy-cells = <0>; - }; - }; - - sata4: ahci@100000 { - compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x00100000 0x1000>; - reg-names = "ahci"; - interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata4_port0: sata-port@0 { - reg = <0>; - phys = <&sata4_phy0>; - phy-names = "sata-phy"; - }; - }; - - sata_phy4: sata_phy@102100 { - compatible = "brcm,iproc-sr-sata-phy"; - reg = <0x00102100 0x1000>; - reg-names = "phy"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata4_phy0: sata-phy@0 { - reg = <0>; - #phy-cells = <0>; - }; - }; - - sata5: ahci@110000 { - compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x00110000 0x1000>; - reg-names = "ahci"; - interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata5_port0: sata-port@0 { - reg = <0>; - phys = <&sata5_phy0>; - phy-names = "sata-phy"; - }; - }; - - sata_phy5: sata_phy@112100 { - compatible = "brcm,iproc-sr-sata-phy"; - reg = <0x00112100 0x1000>; - reg-names = "phy"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata5_phy0: sata-phy@0 { - reg = <0>; - #phy-cells = <0>; - }; - }; - - sata6: ahci@120000 { - compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x00120000 0x1000>; - reg-names = "ahci"; - interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata6_port0: sata-port@0 { - reg = <0>; - phys = <&sata6_phy0>; - phy-names = "sata-phy"; - }; - }; - - sata_phy6: sata_phy@122100 { - compatible = "brcm,iproc-sr-sata-phy"; - reg = <0x00122100 0x1000>; - reg-names = "phy"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata6_phy0: sata-phy@0 { - reg = <0>; - #phy-cells = <0>; - }; - }; - - sata7: ahci@130000 { - compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x00130000 0x1000>; - reg-names = "ahci"; - interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata7_port0: sata-port@0 { - reg = <0>; - phys = <&sata7_phy0>; - phy-names = "sata-phy"; - }; - }; - - sata_phy7: sata_phy@132100 { - compatible = "brcm,iproc-sr-sata-phy"; - reg = <0x00132100 0x1000>; - reg-names = "phy"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata7_phy0: sata-phy@0 { - reg = <0>; - #phy-cells = <0>; - }; - }; - }; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi index b425b12c3ed2..2ffb2c92182a 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -285,7 +285,6 @@ }; #include "stingray-fs4.dtsi" - #include "stingray-sata.dtsi" #include "stingray-pcie.dtsi" #include "stingray-usb.dtsi" @@ -309,12 +308,6 @@ #size-cells = <0>; }; - mdio@2 { /* SATA */ - reg = <0x2>; - #address-cells = <1>; - #size-cells = <0>; - }; - mdio@3 { /* USB */ reg = <0x3>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index 03486a8ffc67..413cac63a1cb 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -388,7 +388,7 @@ pmic@66 { compatible = "samsung,s2mps13-pmic"; interrupt-parent = <&gpa0>; - interrupts = <7 IRQ_TYPE_NONE>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; reg = <0x66>; samsung,s2mps11-wrstbi-ground; @@ -793,7 +793,7 @@ compatible = "samsung,s3fwrn5-i2c"; reg = <0x27>; interrupt-parent = <&gpa1>; - interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>; wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts index 695d4c140646..125c03f351d9 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts @@ -90,7 +90,7 @@ pmic@66 { compatible = "samsung,s2mps15-pmic"; reg = <0x66>; - interrupts = <2 IRQ_TYPE_NONE>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&gpa0>; pinctrl-names = "default"; pinctrl-0 = <&pmic_irq>; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 6f0777ee6cd6..6438db3822f8 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-kbox-a-230-ls.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var1.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var2.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var3-ads2.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var4.dtb @@ -33,16 +34,23 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r3.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r4.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-nitrogen.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-phanbell.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts index 67702667ed8a..2517528f684f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts @@ -7,6 +7,7 @@ */ /dts-v1/; +#include <dt-bindings/interrupt-controller/irq.h> #include "fsl-ls1012a.dtsi" / { @@ -57,6 +58,26 @@ }; }; +&dspi { + bus-num = <0>; + status = "okay"; + + serial@0 { + compatible = "nxp,sc16is740"; + reg = <0>; + spi-max-frequency = <4000000>; + clocks = <&sc16is7xx_clk>; + interrupt-parent = <&gpio1>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + sc16is7xx_clk: clock-sc16is7xx { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + }; +}; + &duart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts index 449475a97bf1..e22c5e77fecd 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts @@ -13,6 +13,11 @@ model = "LS1012A QDS Board"; compatible = "fsl,ls1012a-qds", "fsl,ls1012a"; + aliases { + mmc0 = &esdhc0; + mmc1 = &esdhc1; + }; + sys_mclk: clock-mclk { compatible = "fixed-clock"; #clock-cells = <0>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts index d45c17620b98..79f155dedb2d 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts @@ -7,11 +7,17 @@ */ /dts-v1/; +#include <dt-bindings/interrupt-controller/irq.h> #include "fsl-ls1012a.dtsi" / { model = "LS1012A RDB Board"; compatible = "fsl,ls1012a-rdb", "fsl,ls1012a"; + + aliases { + mmc0 = &esdhc0; + mmc1 = &esdhc1; + }; }; &duart0 { @@ -33,6 +39,50 @@ &i2c0 { status = "okay"; + + accelerometer@1e { + compatible = "nxp,fxos8700"; + reg = <0x1e>; + interrupt-parent = <&gpio26>; + interrupts = <13 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT1"; + }; + + gyroscope@20 { + compatible = "nxp,fxas21002c"; + reg = <0x20>; + }; + + gpio@24 { + compatible = "nxp,pcal9555a"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@25 { + compatible = "nxp,pcal9555a"; + reg = <0x25>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio26: gpio@26 { + compatible = "nxp,pcal9555a"; + reg = <0x26>; + interrupt-parent = <&gpio0>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + + current-sensor@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <2000>; + }; }; &qspi { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index 626b709d1fb9..7de6b376d792 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -7,6 +7,7 @@ * */ +#include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> @@ -34,7 +35,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; #cooling-cells = <2>; cpu-idle-states = <&CPU_PH20>; }; @@ -148,7 +149,10 @@ reg-names = "QuadSPI", "QuadSPI-memory"; interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; clock-names = "qspi_en", "qspi"; - clocks = <&clockgen 4 0>, <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; status = "disabled"; }; @@ -156,7 +160,8 @@ compatible = "fsl,ls1012a-esdhc", "fsl,esdhc"; reg = <0x0 0x1560000 0x0 0x10000>; interrupts = <0 62 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; big-endian; @@ -174,7 +179,8 @@ compatible = "fsl,ls1012a-esdhc", "fsl,esdhc"; reg = <0x0 0x1580000 0x0 0x10000>; interrupts = <0 65 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; big-endian; @@ -341,7 +347,8 @@ #size-cells = <0>; reg = <0x0 0x2180000 0x0 0x10000>; interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; }; @@ -351,7 +358,8 @@ #size-cells = <0>; reg = <0x0 0x2190000 0x0 0x10000>; interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; }; @@ -362,7 +370,8 @@ reg = <0x0 0x2100000 0x0 0x10000>; interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>; clock-names = "dspi"; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; spi-num-chipselects = <5>; big-endian; status = "disabled"; @@ -372,7 +381,8 @@ compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0500 0x0 0x100>; interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; status = "disabled"; }; @@ -380,7 +390,8 @@ compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0600 0x0 0x100>; interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; status = "disabled"; }; @@ -409,7 +420,7 @@ "fsl,imx21-wdt"; reg = <0x0 0x2ad0000 0x0 0x10000>; interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; big-endian; }; @@ -418,8 +429,14 @@ compatible = "fsl,vf610-sai"; reg = <0x0 0x2b50000 0x0 0x10000>; interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>, - <&clockgen 4 3>, <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 1 47>, @@ -432,8 +449,14 @@ compatible = "fsl,vf610-sai"; reg = <0x0 0x2b60000 0x0 0x10000>; interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>, - <&clockgen 4 3>, <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 1 45>, @@ -453,8 +476,10 @@ dma-channels = <32>; big-endian; clock-names = "dmamux0", "dmamux1"; - clocks = <&clockgen 4 3>, - <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; }; usb0: usb@2f00000 { @@ -473,7 +498,8 @@ <0x0 0x20140520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; dma-coherent; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts index d66d8b2c3d1a..6b575efd84a7 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts @@ -107,3 +107,7 @@ ethernet = <&enetc_port2>; status = "okay"; }; + +&sata { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts new file mode 100644 index 000000000000..6c309b97587d --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Device Tree file for the Kontron SMARC-sAL28 board. + * + * This is for the network variant 1 which has one ethernet port. It is + * different than the base variant, which also has one port, but here the + * port is connected via RGMII. This port is not TSN aware. + * None of the four SerDes lanes are used by the module, instead they are + * all led out to the carrier for customer use. + * + * Copyright (C) 2020 Michael Walle <michael@walle.cc> + * + */ + +/dts-v1/; +#include "fsl-ls1028a-kontron-sl28.dts" +#include <dt-bindings/net/qca-ar803x.h> + +/ { + model = "Kontron SMARC-sAL28 (4 Lanes)"; + compatible = "kontron,sl28-var1", "kontron,sl28", "fsl,ls1028a"; +}; + +&enetc_port0 { + status = "disabled"; + /* + * Delete both the phy-handle to the old phy0 label as well as + * the mdio node with the old phy node with the old phy0 label. + */ + /delete-property/ phy-handle; + /delete-node/ mdio; +}; + +&enetc_port1 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@4 { + reg = <0x4>; + eee-broken-1000t; + eee-broken-100tx; + qca,clk-out-frequency = <125000000>; + qca,clk-out-strength = <AR803X_STRENGTH_FULL>; + vddio-supply = <&vddh>; + + vddio: vddio-regulator { + regulator-name = "VDDIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddh: vddh-regulator { + regulator-name = "VDDH"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts index c45d7b40e374..ed4e69e87e30 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts @@ -8,6 +8,8 @@ */ /dts-v1/; + +#include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include "fsl-ls1028a-kontron-sl28.dts" / { @@ -120,7 +122,8 @@ mclk: clock-mclk@f130080 { compatible = "fsl,vf610-sai-clock"; reg = <0x0 0xf130080 0x0 0x80>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; #clock-cells = <0>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts index c0786b713791..fbcba9cb8503 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts @@ -109,6 +109,14 @@ }; }; +&can0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + &dspi0 { bus-num = <0>; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts index c1d1ba459307..41ae6e7675ba 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts @@ -85,6 +85,22 @@ }; }; +&can0 { + status = "okay"; + + can-transceiver { + max-bitrate = <5000000>; + }; +}; + +&can1 { + status = "okay"; + + can-transceiver { + max-bitrate = <5000000>; + }; +}; + &esdhc { sd-uhs-sdr104; sd-uhs-sdr50; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 6c8a61c2cc74..262fbad8f0ec 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -8,6 +8,7 @@ * */ +#include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> @@ -30,7 +31,7 @@ compatible = "arm,cortex-a72"; reg = <0x0>; enable-method = "psci"; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PW20>; #cooling-cells = <2>; @@ -41,7 +42,7 @@ compatible = "arm,cortex-a72"; reg = <0x1>; enable-method = "psci"; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PW20>; #cooling-cells = <2>; @@ -205,9 +206,20 @@ }; dcfg: syscon@1e00000 { - compatible = "fsl,ls1028a-dcfg", "syscon"; + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ls1028a-dcfg", "syscon", "simple-mfd"; reg = <0x0 0x1e00000 0x0 0x10000>; + ranges = <0x0 0x0 0x1e00000 0x10000>; little-endian; + + fspi_clk: clock-controller@900 { + compatible = "fsl,ls1028a-flexspi-clk"; + reg = <0x900 0x4>; + #clock-cells = <0>; + clocks = <&clockgen QORIQ_CLK_HWACCEL 0>; + clock-output-names = "fspi_clk"; + }; }; rst: syscon@1e60000 { @@ -235,7 +247,8 @@ #size-cells = <0>; reg = <0x0 0x2000000 0x0 0x10000>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; }; @@ -245,7 +258,8 @@ #size-cells = <0>; reg = <0x0 0x2010000 0x0 0x10000>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; }; @@ -255,7 +269,8 @@ #size-cells = <0>; reg = <0x0 0x2020000 0x0 0x10000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; }; @@ -265,7 +280,8 @@ #size-cells = <0>; reg = <0x0 0x2030000 0x0 0x10000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; }; @@ -275,7 +291,8 @@ #size-cells = <0>; reg = <0x0 0x2040000 0x0 0x10000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; }; @@ -285,7 +302,8 @@ #size-cells = <0>; reg = <0x0 0x2050000 0x0 0x10000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; }; @@ -295,7 +313,8 @@ #size-cells = <0>; reg = <0x0 0x2060000 0x0 0x10000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; }; @@ -305,7 +324,8 @@ #size-cells = <0>; reg = <0x0 0x2070000 0x0 0x10000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; }; @@ -317,7 +337,7 @@ <0x0 0x20000000 0x0 0x10000000>; reg-names = "fspi_base", "fspi_mmap"; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 2 0>, <&clockgen 2 0>; + clocks = <&fspi_clk>, <&fspi_clk>; clock-names = "fspi_en", "fspi"; status = "disabled"; }; @@ -329,7 +349,8 @@ reg = <0x0 0x2100000 0x0 0x10000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clock-names = "dspi"; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; dmas = <&edma0 0 62>, <&edma0 0 60>; dma-names = "tx", "rx"; spi-num-chipselects = <4>; @@ -344,7 +365,8 @@ reg = <0x0 0x2110000 0x0 0x10000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clock-names = "dspi"; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; dmas = <&edma0 0 58>, <&edma0 0 56>; dma-names = "tx", "rx"; spi-num-chipselects = <4>; @@ -359,7 +381,8 @@ reg = <0x0 0x2120000 0x0 0x10000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clock-names = "dspi"; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; dmas = <&edma0 0 54>, <&edma0 0 2>; dma-names = "tx", "rx"; spi-num-chipselects = <3>; @@ -372,7 +395,7 @@ reg = <0x0 0x2140000 0x0 0x10000>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <0>; /* fixed up by bootloader */ - clocks = <&clockgen 2 1>; + clocks = <&clockgen QORIQ_CLK_HWACCEL 1>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; little-endian; @@ -385,7 +408,7 @@ reg = <0x0 0x2150000 0x0 0x10000>; interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <0>; /* fixed up by bootloader */ - clocks = <&clockgen 2 1>; + clocks = <&clockgen QORIQ_CLK_HWACCEL 1>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; broken-cd; @@ -395,19 +418,25 @@ }; can0: can@2180000 { - compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan"; + compatible = "fsl,lx2160ar1-flexcan"; reg = <0x0 0x2180000 0x0 0x10000>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sysclk>, <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg", "per"; status = "disabled"; }; can1: can@2190000 { - compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan"; + compatible = "fsl,lx2160ar1-flexcan"; reg = <0x0 0x2190000 0x0 0x10000>; interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sysclk>, <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -416,7 +445,8 @@ compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0500 0x0 0x100>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; @@ -424,7 +454,8 @@ compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0600 0x0 0x100>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; @@ -433,7 +464,8 @@ compatible = "fsl,ls1028a-lpuart"; reg = <0x0 0x2260000 0x0 0x1000>; interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; dma-names = "rx","tx"; dmas = <&edma0 1 32>, @@ -445,7 +477,8 @@ compatible = "fsl,ls1028a-lpuart"; reg = <0x0 0x2270000 0x0 0x1000>; interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; dma-names = "rx","tx"; dmas = <&edma0 1 30>, @@ -457,7 +490,8 @@ compatible = "fsl,ls1028a-lpuart"; reg = <0x0 0x2280000 0x0 0x1000>; interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; dma-names = "rx","tx"; dmas = <&edma0 1 28>, @@ -469,7 +503,8 @@ compatible = "fsl,ls1028a-lpuart"; reg = <0x0 0x2290000 0x0 0x1000>; interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; dma-names = "rx","tx"; dmas = <&edma0 1 26>, @@ -481,7 +516,8 @@ compatible = "fsl,ls1028a-lpuart"; reg = <0x0 0x22a0000 0x0 0x1000>; interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; dma-names = "rx","tx"; dmas = <&edma0 1 24>, @@ -493,7 +529,8 @@ compatible = "fsl,ls1028a-lpuart"; reg = <0x0 0x22b0000 0x0 0x1000>; interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; dma-names = "rx","tx"; dmas = <&edma0 1 22>, @@ -512,8 +549,10 @@ interrupt-names = "edma-tx", "edma-err"; dma-channels = <32>; clock-names = "dmamux0", "dmamux1"; - clocks = <&clockgen 4 1>, - <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; }; gpio1: gpio@2300000 { @@ -575,7 +614,8 @@ <0x7 0x100520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; @@ -747,14 +787,20 @@ cluster1_core0_watchdog: watchdog@c000000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc000000 0x0 0x1000>; - clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster1_core1_watchdog: watchdog@c010000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc010000 0x0 0x1000>; - clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; clock-names = "wdog_clk", "apb_pclk"; }; @@ -763,8 +809,14 @@ compatible = "fsl,vf610-sai"; reg = <0x0 0xf100000 0x0 0x10000>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>, <&clockgen 4 1>, - <&clockgen 4 1>, <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 1 4>, @@ -778,8 +830,14 @@ compatible = "fsl,vf610-sai"; reg = <0x0 0xf110000 0x0 0x10000>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>, <&clockgen 4 1>, - <&clockgen 4 1>, <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 1 6>, @@ -793,8 +851,14 @@ compatible = "fsl,vf610-sai"; reg = <0x0 0xf120000 0x0 0x10000>; interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>, <&clockgen 4 1>, - <&clockgen 4 1>, <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 1 8>, @@ -808,8 +872,14 @@ compatible = "fsl,vf610-sai"; reg = <0x0 0xf130000 0x0 0x10000>; interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>, <&clockgen 4 1>, - <&clockgen 4 1>, <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 1 10>, @@ -823,8 +893,14 @@ compatible = "fsl,vf610-sai"; reg = <0x0 0xf140000 0x0 0x10000>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>, <&clockgen 4 1>, - <&clockgen 4 1>, <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 1 12>, @@ -838,8 +914,14 @@ compatible = "fsl,vf610-sai"; reg = <0x0 0xf150000 0x0 0x10000>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>, <&clockgen 4 1>, - <&clockgen 4 1>, <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 1 14>, @@ -960,7 +1042,7 @@ ethernet@0,4 { compatible = "fsl,enetc-ptp"; reg = <0x000400 0 0 0 0>; - clocks = <&clockgen 2 3>; + clocks = <&clockgen QORIQ_CLK_HWACCEL 3>; little-endian; fsl,extts-fifo; }; @@ -1055,8 +1137,10 @@ interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, <0 223 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "DE", "SE"; - clocks = <&dpclk>, <&clockgen 2 2>, <&clockgen 2 2>, - <&clockgen 2 2>; + clocks = <&dpclk>, + <&clockgen QORIQ_CLK_HWACCEL 2>, + <&clockgen QORIQ_CLK_HWACCEL 2>, + <&clockgen QORIQ_CLK_HWACCEL 2>; clock-names = "pxlclk", "mclk", "aclk", "pclk"; arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; arm,malidp-arqos-value = <0xd000d000>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index bbae4b353d3f..5a8a1dc4262d 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -8,6 +8,7 @@ * Mingkai Hu <Mingkai.hu@freescale.com> */ +#include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include <dt-bindings/thermal/thermal.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -44,7 +45,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; @@ -54,7 +55,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x1>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; @@ -64,7 +65,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x2>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; @@ -74,7 +75,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x3>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; @@ -311,6 +312,31 @@ compatible = "fsl,ls1043a-scfg", "syscon"; reg = <0x0 0x1570000 0x0 0x10000>; big-endian; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1570000 0x10000>; + + extirq: interrupt-controller@1ac { + compatible = "fsl,ls1043a-extirq"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1ac 4>; + interrupt-map = + <0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <6 0 &gic GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <7 0 &gic GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <8 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <9 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <10 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <11 0 &gic GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0xffffffff 0x0>; + }; }; crypto: crypto@1700000 { @@ -377,7 +403,10 @@ reg-names = "QuadSPI", "QuadSPI-memory"; interrupts = <0 99 0x4>; clock-names = "qspi_en", "qspi"; - clocks = <&clockgen 4 0>, <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; status = "disabled"; }; @@ -476,7 +505,8 @@ reg = <0x0 0x2100000 0x0 0x10000>; interrupts = <0 64 0x4>; clock-names = "dspi"; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; spi-num-chipselects = <5>; big-endian; status = "disabled"; @@ -489,7 +519,8 @@ reg = <0x0 0x2110000 0x0 0x10000>; interrupts = <0 65 0x4>; clock-names = "dspi"; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; spi-num-chipselects = <5>; big-endian; status = "disabled"; @@ -502,7 +533,8 @@ reg = <0x0 0x2180000 0x0 0x10000>; interrupts = <0 56 0x4>; clock-names = "i2c"; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; dmas = <&edma0 1 39>, <&edma0 1 38>; dma-names = "tx", "rx"; @@ -516,7 +548,8 @@ reg = <0x0 0x2190000 0x0 0x10000>; interrupts = <0 57 0x4>; clock-names = "i2c"; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; status = "disabled"; }; @@ -527,7 +560,8 @@ reg = <0x0 0x21a0000 0x0 0x10000>; interrupts = <0 58 0x4>; clock-names = "i2c"; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; status = "disabled"; }; @@ -538,7 +572,8 @@ reg = <0x0 0x21b0000 0x0 0x10000>; interrupts = <0 59 0x4>; clock-names = "i2c"; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; status = "disabled"; }; @@ -546,28 +581,32 @@ compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0500 0x0 0x100>; interrupts = <0 54 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; }; duart1: serial@21c0600 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0600 0x0 0x100>; interrupts = <0 54 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; }; duart2: serial@21d0500 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21d0500 0x0 0x100>; interrupts = <0 55 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; }; duart3: serial@21d0600 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21d0600 0x0 0x100>; interrupts = <0 55 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; }; gpio1: gpio@2300000 { @@ -679,7 +718,7 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2950000 0x0 0x1000>; interrupts = <0 48 0x4>; - clocks = <&clockgen 0 0>; + clocks = <&clockgen QORIQ_CLK_SYSCLK 0>; clock-names = "ipg"; status = "disabled"; }; @@ -688,7 +727,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2960000 0x0 0x1000>; interrupts = <0 49 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; status = "disabled"; }; @@ -697,7 +737,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2970000 0x0 0x1000>; interrupts = <0 50 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; status = "disabled"; }; @@ -706,7 +747,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2980000 0x0 0x1000>; interrupts = <0 51 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; status = "disabled"; }; @@ -715,7 +757,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2990000 0x0 0x1000>; interrupts = <0 52 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; status = "disabled"; }; @@ -724,7 +767,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x29a0000 0x0 0x1000>; interrupts = <0 53 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; status = "disabled"; }; @@ -733,7 +777,8 @@ compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt"; reg = <0x0 0x2ad0000 0x0 0x10000>; interrupts = <0 83 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; clock-names = "wdog"; big-endian; }; @@ -750,8 +795,10 @@ dma-channels = <32>; big-endian; clock-names = "dmamux0", "dmamux1"; - clocks = <&clockgen 4 0>, - <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; }; usb0: usb@2f00000 { @@ -793,7 +840,8 @@ <0x0 0x20140520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = <0 69 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; dma-coherent; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts index d53ccc56bb63..60acdf0b689e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts @@ -3,6 +3,7 @@ * Device Tree Include file for Freescale Layerscape-1046A family SoC. * * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2019-2020 NXP * * Mingkai Hu <mingkai.hu@nxp.com> */ @@ -74,6 +75,8 @@ rtc@51 { compatible = "nxp,pcf2129"; reg = <0x51>; + /* IRQ_RTC_B -> IRQ05, active low */ + interrupts-extended = <&extirq 5 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 565934cbfa28..1d6dfd189c7f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -8,6 +8,7 @@ * Mingkai Hu <mingkai.hu@nxp.com> */ +#include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> @@ -39,7 +40,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x0>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; @@ -49,7 +50,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x1>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; @@ -59,7 +60,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x2>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; @@ -69,7 +70,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x3>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; @@ -295,7 +296,10 @@ reg-names = "QuadSPI", "QuadSPI-memory"; interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; clock-names = "qspi_en", "qspi"; - clocks = <&clockgen 4 1>, <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; @@ -303,7 +307,7 @@ compatible = "fsl,ls1046a-esdhc", "fsl,esdhc"; reg = <0x0 0x1560000 0x0 0x10000>; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 2 1>; + clocks = <&clockgen QORIQ_CLK_HWACCEL 1>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; big-endian; @@ -314,6 +318,31 @@ compatible = "fsl,ls1046a-scfg", "syscon"; reg = <0x0 0x1570000 0x0 0x10000>; big-endian; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1570000 0x10000>; + + extirq: interrupt-controller@1ac { + compatible = "fsl,ls1046a-extirq", "fsl,ls1043a-extirq"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1ac 4>; + interrupt-map = + <0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <6 0 &gic GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <7 0 &gic GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <8 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <9 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <10 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <11 0 &gic GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0xffffffff 0x0>; + }; }; crypto: crypto@1700000 { @@ -454,7 +483,8 @@ reg = <0x0 0x2100000 0x0 0x10000>; interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; clock-names = "dspi"; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; spi-num-chipselects = <5>; big-endian; status = "disabled"; @@ -466,7 +496,8 @@ #size-cells = <0>; reg = <0x0 0x2180000 0x0 0x10000>; interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; dmas = <&edma0 1 39>, <&edma0 1 38>; dma-names = "tx", "rx"; @@ -479,7 +510,8 @@ #size-cells = <0>; reg = <0x0 0x2190000 0x0 0x10000>; interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; @@ -489,7 +521,8 @@ #size-cells = <0>; reg = <0x0 0x21a0000 0x0 0x10000>; interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; @@ -499,7 +532,8 @@ #size-cells = <0>; reg = <0x0 0x21b0000 0x0 0x10000>; interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; @@ -507,7 +541,8 @@ compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0500 0x0 0x100>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; @@ -515,7 +550,8 @@ compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0600 0x0 0x100>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; @@ -523,7 +559,8 @@ compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21d0500 0x0 0x100>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; @@ -531,7 +568,8 @@ compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21d0600 0x0 0x100>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; @@ -579,7 +617,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2950000 0x0 0x1000>; interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; status = "disabled"; }; @@ -588,7 +627,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2960000 0x0 0x1000>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; status = "disabled"; }; @@ -597,7 +637,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2970000 0x0 0x1000>; interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; status = "disabled"; }; @@ -606,7 +647,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2980000 0x0 0x1000>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; status = "disabled"; }; @@ -615,7 +657,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2990000 0x0 0x1000>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; status = "disabled"; }; @@ -624,7 +667,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x29a0000 0x0 0x1000>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; status = "disabled"; }; @@ -633,7 +677,8 @@ compatible = "fsl,imx21-wdt"; reg = <0x0 0x2ad0000 0x0 0x10000>; interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; big-endian; }; @@ -649,8 +694,10 @@ dma-channels = <32>; big-endian; clock-names = "dmamux0", "dmamux1"; - clocks = <&clockgen 4 1>, - <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; }; usb0: usb@2f00000 { @@ -689,7 +736,8 @@ <0x0 0x20140520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; }; msi1: msi-controller@1580000 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts index 528ec72d0b83..bf7b43ab1293 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts @@ -2,7 +2,7 @@ /* * Device Tree file for NXP LS1088A RDB Board. * - * Copyright 2017 NXP + * Copyright 2017-2020 NXP * * Harninder Rai <harninder.rai@nxp.com> * @@ -158,8 +158,8 @@ rtc@51 { compatible = "nxp,pcf2129"; reg = <0x51>; - /* IRQ10_B */ - interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; + /* IRQ_RTC_B -> IRQ0_B(CPLD) -> IRQ00(CPU), active low */ + interrupts-extended = <&extirq 0 IRQ_TYPE_LEVEL_LOW>; }; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 6403455ed039..8ffbc9fde041 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -7,6 +7,7 @@ * Harninder Rai <harninder.rai@nxp.com> * */ +#include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> @@ -30,7 +31,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; }; @@ -39,7 +40,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x1>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; }; @@ -48,7 +49,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x2>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; }; @@ -57,7 +58,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x3>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; }; @@ -66,7 +67,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x100>; - clocks = <&clockgen 1 1>; + clocks = <&clockgen QORIQ_CLK_CMUX 1>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; }; @@ -75,7 +76,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x101>; - clocks = <&clockgen 1 1>; + clocks = <&clockgen QORIQ_CLK_CMUX 1>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; }; @@ -84,7 +85,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x102>; - clocks = <&clockgen 1 1>; + clocks = <&clockgen QORIQ_CLK_CMUX 1>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; }; @@ -93,7 +94,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x103>; - clocks = <&clockgen 1 1>; + clocks = <&clockgen QORIQ_CLK_CMUX 1>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; }; @@ -220,6 +221,37 @@ little-endian; }; + isc: syscon@1f70000 { + compatible = "fsl,ls1088a-isc", "syscon"; + reg = <0x0 0x1f70000 0x0 0x10000>; + little-endian; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1f70000 0x10000>; + + extirq: interrupt-controller@14 { + compatible = "fsl,ls1088a-extirq"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0x14 4>; + interrupt-map = + <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0xffffffff 0x0>; + }; + }; + tmu: tmu@1f80000 { compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f80000 0x0 0x10000>; @@ -279,7 +311,8 @@ reg = <0x0 0x2100000 0x0 0x10000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clock-names = "dspi"; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; spi-num-chipselects = <6>; status = "disabled"; }; @@ -287,7 +320,8 @@ duart0: serial@21c0500 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21c0500 0x0 0x100>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -295,7 +329,8 @@ duart1: serial@21c0600 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21c0600 0x0 0x100>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -360,7 +395,8 @@ #size-cells = <0>; reg = <0x0 0x2000000 0x0 0x10000>; interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 7>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>; status = "disabled"; }; @@ -370,7 +406,8 @@ #size-cells = <0>; reg = <0x0 0x2010000 0x0 0x10000>; interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 7>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>; status = "disabled"; }; @@ -380,7 +417,8 @@ #size-cells = <0>; reg = <0x0 0x2020000 0x0 0x10000>; interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 7>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>; status = "disabled"; }; @@ -390,7 +428,8 @@ #size-cells = <0>; reg = <0x0 0x2030000 0x0 0x10000>; interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 7>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>; status = "disabled"; }; @@ -403,7 +442,10 @@ reg-names = "QuadSPI", "QuadSPI-memory"; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clock-names = "qspi_en", "qspi"; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; }; @@ -412,7 +454,7 @@ reg = <0x0 0x2140000 0x0 0x10000>; interrupts = <0 28 0x4>; /* Level high type */ clock-frequency = <0>; - clocks = <&clockgen 2 1>; + clocks = <&clockgen QORIQ_CLK_HWACCEL 1>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; little-endian; @@ -447,7 +489,8 @@ <0x7 0x100520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; dma-coherent; status = "disabled"; }; @@ -698,7 +741,8 @@ ptp-timer@8b95000 { compatible = "fsl,dpaa2-ptp"; reg = <0x0 0x8b95000 0x0 0x100>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; little-endian; fsl,extts-fifo; }; @@ -787,56 +831,80 @@ cluster1_core0_watchdog: wdt@c000000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc000000 0x0 0x1000>; - clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster1_core1_watchdog: wdt@c010000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc010000 0x0 0x1000>; - clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster1_core2_watchdog: wdt@c020000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc020000 0x0 0x1000>; - clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster1_core3_watchdog: wdt@c030000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc030000 0x0 0x1000>; - clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster2_core0_watchdog: wdt@c100000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc100000 0x0 0x1000>; - clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster2_core1_watchdog: wdt@c110000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc110000 0x0 0x1000>; - clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster2_core2_watchdog: wdt@c120000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc120000 0x0 0x1000>; - clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster2_core3_watchdog: wdt@c130000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc130000 0x0 0x1000>; - clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; clock-names = "wdog_clk", "apb_pclk"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi index f9c1d30cf4a7..76ab68d2de0b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi @@ -9,6 +9,7 @@ * */ +#include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include "fsl-ls208xa.dtsi" &cpu { @@ -16,7 +17,7 @@ device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x0>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster0_l2>; #cooling-cells = <2>; @@ -26,7 +27,7 @@ device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x1>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster0_l2>; #cooling-cells = <2>; @@ -36,7 +37,7 @@ device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x100>; - clocks = <&clockgen 1 1>; + clocks = <&clockgen QORIQ_CLK_CMUX 1>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster1_l2>; #cooling-cells = <2>; @@ -46,7 +47,7 @@ device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x101>; - clocks = <&clockgen 1 1>; + clocks = <&clockgen QORIQ_CLK_CMUX 1>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster1_l2>; #cooling-cells = <2>; @@ -56,7 +57,7 @@ device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x200>; - clocks = <&clockgen 1 2>; + clocks = <&clockgen QORIQ_CLK_CMUX 2>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster2_l2>; #cooling-cells = <2>; @@ -66,7 +67,7 @@ device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x201>; - clocks = <&clockgen 1 2>; + clocks = <&clockgen QORIQ_CLK_CMUX 2>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster2_l2>; #cooling-cells = <2>; @@ -76,7 +77,7 @@ device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x300>; - clocks = <&clockgen 1 3>; + clocks = <&clockgen QORIQ_CLK_CMUX 3>; next-level-cache = <&cluster3_l2>; cpu-idle-states = <&CPU_PW20>; #cooling-cells = <2>; @@ -86,7 +87,7 @@ device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x301>; - clocks = <&clockgen 1 3>; + clocks = <&clockgen QORIQ_CLK_CMUX 3>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster3_l2>; #cooling-cells = <2>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi index a5f668d786b8..da24dc127698 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi @@ -9,6 +9,7 @@ * */ +#include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include "fsl-ls208xa.dtsi" &cpu { @@ -16,7 +17,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x0>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster0_l2>; #cooling-cells = <2>; @@ -26,7 +27,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x1>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster0_l2>; #cooling-cells = <2>; @@ -36,7 +37,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x100>; - clocks = <&clockgen 1 1>; + clocks = <&clockgen QORIQ_CLK_CMUX 1>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster1_l2>; #cooling-cells = <2>; @@ -46,7 +47,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x101>; - clocks = <&clockgen 1 1>; + clocks = <&clockgen QORIQ_CLK_CMUX 1>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster1_l2>; #cooling-cells = <2>; @@ -56,7 +57,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x200>; - clocks = <&clockgen 1 2>; + clocks = <&clockgen QORIQ_CLK_CMUX 2>; next-level-cache = <&cluster2_l2>; cpu-idle-states = <&CPU_PW20>; #cooling-cells = <2>; @@ -66,7 +67,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x201>; - clocks = <&clockgen 1 2>; + clocks = <&clockgen QORIQ_CLK_CMUX 2>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster2_l2>; #cooling-cells = <2>; @@ -76,7 +77,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x300>; - clocks = <&clockgen 1 3>; + clocks = <&clockgen QORIQ_CLK_CMUX 3>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster3_l2>; #cooling-cells = <2>; @@ -86,7 +87,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x301>; - clocks = <&clockgen 1 3>; + clocks = <&clockgen QORIQ_CLK_CMUX 3>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster3_l2>; #cooling-cells = <2>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi index d0d670227ae2..4b71c4fcb35f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi @@ -3,7 +3,7 @@ * Device Tree file for Freescale LS2080A RDB Board. * * Copyright 2016 Freescale Semiconductor, Inc. - * Copyright 2017 NXP + * Copyright 2017-2020 NXP * * Abhimanyu Saini <abhimanyu.saini@nxp.com> * @@ -56,6 +56,8 @@ rtc@68 { compatible = "dallas,ds3232"; reg = <0x68>; + /* IRQ_RTC_B -> IRQ06, active low */ + interrupts-extended = <&extirq 6 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index c68901f8c6f0..135ac8210871 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -3,12 +3,13 @@ * Device Tree Include file for Freescale Layerscape-2080A family SoC. * * Copyright 2016 Freescale Semiconductor, Inc. - * Copyright 2017 NXP + * Copyright 2017-2020 NXP * * Abhimanyu Saini <abhimanyu.saini@nxp.com> * */ +#include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include <dt-bindings/thermal/thermal.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -277,6 +278,37 @@ little-endian; }; + isc: syscon@1f70000 { + compatible = "fsl,ls2080a-isc", "syscon"; + reg = <0x0 0x1f70000 0x0 0x10000>; + little-endian; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1f70000 0x10000>; + + extirq: interrupt-controller@14 { + compatible = "fsl,ls2080a-extirq", "fsl,ls1088a-extirq"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0x14 4>; + interrupt-map = + <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0xffffffff 0x0>; + }; + }; + tmu: tmu@1f80000 { compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f80000 0x0 0x10000>; @@ -325,84 +357,112 @@ serial0: serial@21c0500 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21c0500 0x0 0x100>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; interrupts = <0 32 0x4>; /* Level high type */ }; serial1: serial@21c0600 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21c0600 0x0 0x100>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; interrupts = <0 32 0x4>; /* Level high type */ }; serial2: serial@21d0500 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21d0500 0x0 0x100>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; interrupts = <0 33 0x4>; /* Level high type */ }; serial3: serial@21d0600 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21d0600 0x0 0x100>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; interrupts = <0 33 0x4>; /* Level high type */ }; cluster1_core0_watchdog: wdt@c000000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc000000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster1_core1_watchdog: wdt@c010000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc010000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster2_core0_watchdog: wdt@c100000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc100000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster2_core1_watchdog: wdt@c110000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc110000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster3_core0_watchdog: wdt@c200000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc200000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster3_core1_watchdog: wdt@c210000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc210000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster4_core0_watchdog: wdt@c300000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc300000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster4_core1_watchdog: wdt@c310000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc310000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; clock-names = "wdog_clk", "apb_pclk"; }; @@ -453,7 +513,8 @@ ptp-timer@8b95000 { compatible = "fsl,dpaa2-ptp"; reg = <0x0 0x8b95000 0x0 0x100>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; little-endian; fsl,extts-fifo; }; @@ -864,7 +925,8 @@ #size-cells = <0>; reg = <0x0 0x2100000 0x0 0x10000>; interrupts = <0 26 0x4>; /* Level high type */ - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; clock-names = "dspi"; spi-num-chipselects = <5>; bus-num = <0>; @@ -875,7 +937,8 @@ compatible = "fsl,ls2080a-esdhc", "fsl,esdhc"; reg = <0x0 0x2140000 0x0 0x10000>; interrupts = <0 28 0x4>; /* Level high type */ - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; little-endian; @@ -934,7 +997,8 @@ reg = <0x0 0x2000000 0x0 0x10000>; interrupts = <0 34 0x4>; /* Level high type */ clock-names = "i2c"; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; }; i2c1: i2c@2010000 { @@ -945,7 +1009,8 @@ reg = <0x0 0x2010000 0x0 0x10000>; interrupts = <0 34 0x4>; /* Level high type */ clock-names = "i2c"; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; }; i2c2: i2c@2020000 { @@ -956,7 +1021,8 @@ reg = <0x0 0x2020000 0x0 0x10000>; interrupts = <0 35 0x4>; /* Level high type */ clock-names = "i2c"; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; }; i2c3: i2c@2030000 { @@ -967,7 +1033,8 @@ reg = <0x0 0x2030000 0x0 0x10000>; interrupts = <0 35 0x4>; /* Level high type */ clock-names = "i2c"; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; }; ifc: ifc@2240000 { @@ -991,7 +1058,10 @@ <0x0 0x20000000 0x0 0x10000000>; reg-names = "QuadSPI", "QuadSPI-memory"; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; clock-names = "qspi_en", "qspi"; status = "disabled"; }; @@ -1089,7 +1159,8 @@ compatible = "fsl,ls2080a-ahci"; reg = <0x0 0x3200000 0x0 0x10000>; interrupts = <0 133 0x4>; /* Level high type */ - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; dma-coherent; }; @@ -1098,7 +1169,8 @@ compatible = "fsl,ls2080a-ahci"; reg = <0x0 0x3210000 0x0 0x10000>; interrupts = <0 136 0x4>; /* Level high type */ - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; dma-coherent; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi index d87d16460875..459dccad8326 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi @@ -40,6 +40,7 @@ rgmii_phy1: ethernet-phy@1 { reg = <1>; + qca,smarteee-tw-us-1g = <24>; }; }; @@ -134,8 +135,6 @@ rtc@51 { compatible = "nxp,pcf2129"; reg = <0x51>; - // IRQ10_B - interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi index f3741a32e868..2b63235ca627 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi @@ -8,6 +8,7 @@ /dts-v1/; #include "fsl-lx2160a-cex7.dtsi" +#include <dt-bindings/input/linux-event-codes.h> / { aliases { @@ -18,6 +19,17 @@ chosen { stdout-path = "serial0:115200n8"; }; + + gpio-keys { + compatible = "gpio-keys"; + + key { + label = "power"; + linux,can-disable; + linux,code = <KEY_POWER>; + gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; + }; + }; }; &emdio2 { diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts index 2d1fe6c3797f..d858d9c8b583 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts @@ -14,6 +14,8 @@ aliases { crypto = &crypto; + mmc0 = &esdhc0; + mmc1 = &esdhc1; serial0 = &uart0; }; @@ -31,6 +33,14 @@ }; }; +&can0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + &crypto { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts index 7723ad5efd37..5dbf27493e8b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts @@ -2,7 +2,7 @@ // // Device Tree file for LX2160ARDB // -// Copyright 2018 NXP +// Copyright 2018-2020 NXP /dts-v1/; @@ -14,6 +14,8 @@ aliases { crypto = &crypto; + mmc0 = &esdhc0; + mmc1 = &esdhc1; serial0 = &uart0; }; @@ -87,6 +89,22 @@ }; }; +&can0 { + status = "okay"; + + can-transceiver { + max-bitrate = <5000000>; + }; +}; + +&can1 { + status = "okay"; + + can-transceiver { + max-bitrate = <5000000>; + }; +}; + &esdhc0 { sd-uhs-sdr104; sd-uhs-sdr50; @@ -175,8 +193,8 @@ rtc@51 { compatible = "nxp,pcf2129"; reg = <0x51>; - // IRQ10_B - interrupts = <0 150 0x4>; + /* IRQ_RTC_B -> IRQ08, active low */ + interrupts-extended = <&extirq 8 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index 197397777c83..0551f6f4c313 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -4,6 +4,7 @@ // // Copyright 2018-2020 NXP +#include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> @@ -30,7 +31,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x0>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; @@ -47,7 +48,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x1>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; @@ -64,7 +65,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x100>; - clocks = <&clockgen 1 1>; + clocks = <&clockgen QORIQ_CLK_CMUX 1>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; @@ -81,7 +82,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x101>; - clocks = <&clockgen 1 1>; + clocks = <&clockgen QORIQ_CLK_CMUX 1>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; @@ -98,7 +99,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x200>; - clocks = <&clockgen 1 2>; + clocks = <&clockgen QORIQ_CLK_CMUX 2>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; @@ -115,7 +116,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x201>; - clocks = <&clockgen 1 2>; + clocks = <&clockgen QORIQ_CLK_CMUX 2>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; @@ -132,7 +133,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x300>; - clocks = <&clockgen 1 3>; + clocks = <&clockgen QORIQ_CLK_CMUX 3>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; @@ -149,7 +150,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x301>; - clocks = <&clockgen 1 3>; + clocks = <&clockgen QORIQ_CLK_CMUX 3>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; @@ -166,7 +167,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x400>; - clocks = <&clockgen 1 4>; + clocks = <&clockgen QORIQ_CLK_CMUX 4>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; @@ -183,7 +184,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x401>; - clocks = <&clockgen 1 4>; + clocks = <&clockgen QORIQ_CLK_CMUX 4>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; @@ -200,7 +201,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x500>; - clocks = <&clockgen 1 5>; + clocks = <&clockgen QORIQ_CLK_CMUX 5>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; @@ -217,7 +218,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x501>; - clocks = <&clockgen 1 5>; + clocks = <&clockgen QORIQ_CLK_CMUX 5>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; @@ -234,7 +235,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x600>; - clocks = <&clockgen 1 6>; + clocks = <&clockgen QORIQ_CLK_CMUX 6>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; @@ -251,7 +252,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x601>; - clocks = <&clockgen 1 6>; + clocks = <&clockgen QORIQ_CLK_CMUX 6>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; @@ -268,7 +269,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x700>; - clocks = <&clockgen 1 7>; + clocks = <&clockgen QORIQ_CLK_CMUX 7>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; @@ -285,7 +286,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x701>; - clocks = <&clockgen 1 7>; + clocks = <&clockgen QORIQ_CLK_CMUX 7>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; @@ -664,6 +665,37 @@ little-endian; }; + isc: syscon@1f70000 { + compatible = "fsl,lx2160a-isc", "syscon"; + reg = <0x0 0x1f70000 0x0 0x10000>; + little-endian; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1f70000 0x10000>; + + extirq: interrupt-controller@14 { + compatible = "fsl,lx2160a-extirq", "fsl,ls1088a-extirq"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0x14 4>; + interrupt-map = + <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0xffffffff 0x0>; + }; + }; + tmu: tmu@1f80000 { compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f80000 0x0 0x10000>; @@ -685,7 +717,8 @@ reg = <0x0 0x2000000 0x0 0x10000>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; scl-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>; status = "disabled"; }; @@ -697,7 +730,8 @@ reg = <0x0 0x2010000 0x0 0x10000>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; status = "disabled"; }; @@ -708,7 +742,8 @@ reg = <0x0 0x2020000 0x0 0x10000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; status = "disabled"; }; @@ -719,7 +754,8 @@ reg = <0x0 0x2030000 0x0 0x10000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; status = "disabled"; }; @@ -730,7 +766,8 @@ reg = <0x0 0x2040000 0x0 0x10000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; scl-gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; status = "disabled"; }; @@ -742,7 +779,8 @@ reg = <0x0 0x2050000 0x0 0x10000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; status = "disabled"; }; @@ -753,7 +791,8 @@ reg = <0x0 0x2060000 0x0 0x10000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; status = "disabled"; }; @@ -764,7 +803,8 @@ reg = <0x0 0x2070000 0x0 0x10000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; status = "disabled"; }; @@ -776,7 +816,10 @@ <0x0 0x20000000 0x0 0x10000000>; reg-names = "fspi_base", "fspi_mmap"; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; clock-names = "fspi_en", "fspi"; status = "disabled"; }; @@ -787,7 +830,8 @@ #size-cells = <0>; reg = <0x0 0x2100000 0x0 0x10000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 7>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>; clock-names = "dspi"; spi-num-chipselects = <5>; bus-num = <0>; @@ -800,7 +844,8 @@ #size-cells = <0>; reg = <0x0 0x2110000 0x0 0x10000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 7>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>; clock-names = "dspi"; spi-num-chipselects = <5>; bus-num = <1>; @@ -813,7 +858,8 @@ #size-cells = <0>; reg = <0x0 0x2120000 0x0 0x10000>; interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 7>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>; clock-names = "dspi"; spi-num-chipselects = <5>; bus-num = <2>; @@ -824,7 +870,8 @@ compatible = "fsl,esdhc"; reg = <0x0 0x2140000 0x0 0x10000>; interrupts = <0 28 0x4>; /* Level high type */ - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; dma-coherent; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; @@ -837,7 +884,8 @@ compatible = "fsl,esdhc"; reg = <0x0 0x2150000 0x0 0x10000>; interrupts = <0 63 0x4>; /* Level high type */ - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; dma-coherent; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; @@ -847,6 +895,30 @@ status = "disabled"; }; + can0: can@2180000 { + compatible = "fsl,lx2160ar1-flexcan"; + reg = <0x0 0x2180000 0x0 0x10000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>, + <&clockgen QORIQ_CLK_SYSCLK 0>; + clock-names = "ipg", "per"; + fsl,clk-source = <0>; + status = "disabled"; + }; + + can1: can@2190000 { + compatible = "fsl,lx2160ar1-flexcan"; + reg = <0x0 0x2190000 0x0 0x10000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>, + <&clockgen QORIQ_CLK_SYSCLK 0>; + clock-names = "ipg", "per"; + fsl,clk-source = <0>; + status = "disabled"; + }; + uart0: serial@21c0000 { compatible = "arm,sbsa-uart","arm,pl011"; reg = <0x0 0x21c0000 0x0 0x1000>; @@ -973,7 +1045,8 @@ <0x7 0x100520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; dma-coherent; status = "disabled"; }; @@ -984,7 +1057,8 @@ <0x7 0x100520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; dma-coherent; status = "disabled"; }; @@ -995,7 +1069,8 @@ <0x7 0x100520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; dma-coherent; status = "disabled"; }; @@ -1006,7 +1081,8 @@ <0x7 0x100520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; dma-coherent; status = "disabled"; }; @@ -1279,7 +1355,8 @@ ptp-timer@8b95000 { compatible = "fsl,dpaa2-ptp"; reg = <0x0 0x8b95000 0x0 0x100>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; little-endian; fsl,extts-fifo; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts index 91786848bd30..e1defee1ad27 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts @@ -14,6 +14,8 @@ aliases { crypto = &crypto; + mmc0 = &esdhc0; + mmc1 = &esdhc1; serial0 = &uart0; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi index d6b9dedd168f..6f5e63696ec0 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi @@ -102,7 +102,6 @@ compatible = "wlf,wm8962"; reg = <0x1a>; clocks = <&clk IMX8MM_CLK_SAI3_ROOT>; - clock-names = "xclk"; DCVDD-supply = <®_audio>; DBVDD-supply = <®_audio>; AVDD-supply = <®_audio>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi index d897913537ca..988f8ab679ad 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi @@ -256,8 +256,10 @@ &usdhc1 { #address-cells = <1>; #size-cells = <0>; - pinctrl-names = "default"; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; bus-width = <4>; non-removable; cap-power-off-card; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts new file mode 100644 index 000000000000..c0c384d76147 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts @@ -0,0 +1,393 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Boundary Devices i.MX8MMini Nitrogen8MM Rev2 board. + * Adrien Grassein <adrien.grassein@gmail.com.com> + */ +/dts-v1/; +#include "imx8mm.dtsi" + +/ { + model = "Boundary Devices i.MX8MMini Nitrogen8MM Rev2"; + compatible = "boundary,imx8mm-nitrogen8mm", "fsl,imx8mm"; +}; + +&A53_0 { + cpu-supply = <®_buck3>; +}; + +&A53_1 { + cpu-supply = <®_buck3>; +}; + +&A53_2 { + cpu-supply = <®_buck3>; +}; + +&A53_3 { + cpu-supply = <®_buck3>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <4>; + interrupts-extended = <&gpio3 16 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@8 { + compatible = "nxp,pf8121a"; + reg = <0x8>; + + regulators { + reg_ldo1: ldo1 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_ldo2: ldo2 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_ldo3: ldo3 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_ldo4: ldo4 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_buck1: buck1 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_buck2: buck2 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_buck3: buck3 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_buck4: buck4 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_buck5: buck5 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_buck6: buck6 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_buck7: buck7 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vsnvs: vsnvs { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + i2cmux@70 { + compatible = "nxp,pca9540"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c3 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@68 { + compatible = "microcrystal,rv4162"; + reg = <0x68>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3a_rv4162>; + interrupts-extended = <&gpio4 22 IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + }; + }; + }; +}; + +/* console */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + assigned-clocks = <&clk IMX8MM_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MM_CLK_24M>; + status = "okay"; +}; + +/* eMMC */ +&usdhc1 { + bus-width = <8>; + sdhci-caps-mask = <0x80000000 0x0>; + non-removable; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + status = "okay"; +}; + +/* sdcard */ +&usdhc2 { + bus-width = <4>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + vqmmc-supply = <®_ldo2>; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x159 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x09 + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x09 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + + pinctrl_i2c3a_rv4162: i2c3a-rv4162grp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x1c0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d0 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d0 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d0 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d0 + MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x141 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d4 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d4 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d4 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d4 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d6 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d6 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d6 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d6 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x03 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x140 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi new file mode 100644 index 000000000000..c769fadbd008 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi @@ -0,0 +1,495 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2020 Gateworks Corporation + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/net/ti-dp83867.h> + +/ { + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + user-pb { + label = "user_pb"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = <BTN_1>; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key_erased"; + linux,code = <BTN_2>; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = <BTN_3>; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <BTN_4>; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = <BTN_5>; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; +}; + +&A53_0 { + cpu-supply = <&buck3_reg>; +}; + +&A53_1 { + cpu-supply = <&buck3_reg>; +}; + +&A53_2 { + cpu-supply = <&buck3_reg>; +}; + +&A53_3 { + cpu-supply = <&buck3_reg>; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + pinctrl-0 = <&pinctrl_gsc>; + interrupt-parent = <&gpio2>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@6 { + gw,mode = <0>; + reg = <0x06>; + label = "temp"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@16 { + gw,mode = <4>; + reg = <0x16>; + label = "fan_tach"; + }; + + channel@82 { + gw,mode = <2>; + reg = <0x82>; + label = "vdd_vin"; + gw,voltage-divider-ohms = <22100 1000>; + }; + + channel@84 { + gw,mode = <2>; + reg = <0x84>; + label = "vdd_adc1"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@86 { + gw,mode = <2>; + reg = <0x86>; + label = "vdd_adc2"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@88 { + gw,mode = <2>; + reg = <0x88>; + label = "vdd_dram"; + }; + + channel@8c { + gw,mode = <2>; + reg = <0x8c>; + label = "vdd_1p2"; + }; + + channel@8e { + gw,mode = <2>; + reg = <0x8e>; + label = "vdd_1p0"; + }; + + channel@90 { + gw,mode = <2>; + reg = <0x90>; + label = "vdd_2p5"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@92 { + gw,mode = <2>; + reg = <0x92>; + label = "vdd_3p3"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@98 { + gw,mode = <2>; + reg = <0x98>; + label = "vdd_0p95"; + }; + + channel@9a { + gw,mode = <2>; + reg = <0x9a>; + label = "vdd_1p8"; + }; + + channel@a2 { + gw,mode = <2>; + reg = <0xa2>; + label = "vdd_gsc"; + gw,voltage-divider-ohms = <10000 10000>; + }; + }; + + fan-controller@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "gw,gsc-fan"; + reg = <0x0a>; + }; + }; + + gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + rtc@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; + + pmic@69 { + compatible = "mps,mp5416"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + reg = <0x69>; + + regulators { + buck1 { + regulator-name = "vdd_0p95"; + regulator-min-microvolt = <805000>; + regulator-max-microvolt = <1000000>; + regulator-max-microamp = <2500000>; + regulator-boot-on; + }; + + buck2 { + regulator-name = "vdd_soc"; + regulator-min-microvolt = <805000>; + regulator-max-microvolt = <900000>; + regulator-max-microamp = <1000000>; + regulator-boot-on; + }; + + buck3_reg: buck3 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <805000>; + regulator-max-microvolt = <1000000>; + regulator-max-microamp = <2200000>; + regulator-boot-on; + }; + + buck4 { + regulator-name = "vdd_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-max-microamp = <500000>; + regulator-boot-on; + }; + + ldo1 { + regulator-name = "nvcc_snvs_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-max-microamp = <300000>; + regulator-boot-on; + }; + + ldo2 { + regulator-name = "vdd_snvs_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + }; + + ldo3 { + regulator-name = "vdd_0p95"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + }; + + ldo4 { + regulator-name = "vdd_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + eeprom@52 { + compatible = "atmel,24c32"; + reg = <0x52>; + pagesize = <32>; + }; +}; + +/* console */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0 0x19 + >; + }; + + pinctrl_gsc: gscgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x159 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx-0x.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx-0x.dts new file mode 100644 index 000000000000..3f88c4ad5716 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx-0x.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2020 Gateworks Corporation + */ + +/dts-v1/; + +#include "imx8mm.dtsi" +#include "imx8mm-venice-gw700x.dtsi" +#include "imx8mm-venice-gw71xx.dtsi" + +/ { + model = "Gateworks Venice GW71xx-0x i.MX8MM Development Kit"; + compatible = "gw,imx8mm-gw71xx-0x", "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi new file mode 100644 index 000000000000..905b68a3daa5 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi @@ -0,0 +1,186 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2020 Gateworks Corporation + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + aliases { + usb0 = &usbotg1; + usb1 = &usbotg2; + }; + + led-controller { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led-0 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + pps { + compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb1_en>; + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +/* off-board header */ +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + accelerometer@19 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_accel>; + compatible = "st,lis2de12"; + reg = <0x19>; + st,drdy-int-pin = <1>; + interrupt-parent = <&gpio4>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "INT1"; + }; +}; + +/* off-board header */ +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +/* GPS */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* off-board header */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* PLUG_TEST */ + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x40000041 /* PCI_USBSEL */ + MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000041 /* PCIE_WDIS# */ + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x40000041 /* DIO0 */ + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x40000041 /* DIO1 */ + MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x40000041 /* DIO2 */ + MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x40000041 /* DIO2 */ + >; + }; + + pinctrl_accel: accelgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x159 + >; + }; + + pinctrl_gpio_leds: gpioledgrp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x19 + MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x19 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41 + >; + }; + + pinctrl_reg_usb1_en: regusb1grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x41 + MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x41 + >; + }; + + pinctrl_spi2: spi2grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6 + MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6 + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6 + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts new file mode 100644 index 000000000000..b1e7540f0281 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2020 Gateworks Corporation + */ + +/dts-v1/; + +#include "imx8mm.dtsi" +#include "imx8mm-venice-gw700x.dtsi" +#include "imx8mm-venice-gw72xx.dtsi" + +/ { + model = "Gateworks Venice GW72xx-0x i.MX8MM Development Kit"; + compatible = "gw,imx8mm-gw72xx-0x", "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; +}; + diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi new file mode 100644 index 000000000000..b7c91bdc21dd --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi @@ -0,0 +1,311 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2020 Gateworks Corporation + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + aliases { + usb0 = &usbotg1; + usb1 = &usbotg2; + }; + + led-controller { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led-0 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + pps { + compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb1_en>; + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usb_otg2_vbus: regulator-usb-otg2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb2_en>; + compatible = "regulator-fixed"; + regulator-name = "usb_otg2_vbus"; + gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +/* off-board header */ +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + accelerometer@19 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_accel>; + compatible = "st,lis2de12"; + reg = <0x19>; + st,drdy-int-pin = <1>; + interrupt-parent = <&gpio4>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "INT1"; + }; +}; + +/* off-board header */ +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +/* off-board header */ +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MM_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + +/* GPS */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* off-board header */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +/* RS232 */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + vbus-supply = <®_usb_otg2_vbus>; + status = "okay"; +}; + +/* microSD */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* PLUG_TEST */ + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x40000041 /* PCI_USBSEL */ + MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000041 /* PCIE_WDIS# */ + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x40000041 /* DIO0 */ + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x40000041 /* DIO1 */ + MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x40000104 /* RS485_TERM */ + MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x40000104 /* RS485 */ + MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x40000104 /* RS485_HALF */ + >; + }; + + pinctrl_accel: accelgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x159 + >; + }; + + pinctrl_gpio_leds: gpioledgrp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x19 + MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x19 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41 + >; + }; + + pinctrl_reg_usb1_en: regusb1grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x41 + MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x41 + >; + }; + + pinctrl_reg_usb2_en: regusb2grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x41 + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 + MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 + MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6 + MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 + MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6 + >; + }; + + pinctrl_spi2: spi2grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6 + MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6 + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6 + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140 + MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4 + MX8MM_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0x1d0 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x.dts new file mode 100644 index 000000000000..6905437ff281 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2020 Gateworks Corporation + */ + +/dts-v1/; + +#include "imx8mm.dtsi" +#include "imx8mm-venice-gw700x.dtsi" +#include "imx8mm-venice-gw73xx.dtsi" + +/ { + model = "Gateworks Venice GW73xx-0x i.MX8MM Development Kit"; + compatible = "gw,imx8mm-gw73xx-0x", "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi new file mode 100644 index 000000000000..d2ffd62a3bd4 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi @@ -0,0 +1,362 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2020 Gateworks Corporation + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + aliases { + usb0 = &usbotg1; + usb1 = &usbotg2; + }; + + led-controller { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led-0 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + pps { + compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb1_en>; + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usb_otg2_vbus: regulator-usb-otg2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb2_en>; + compatible = "regulator-fixed"; + regulator-name = "usb_otg2_vbus"; + gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_wifi_en: regulator-wifi-en { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_wl>; + compatible = "regulator-fixed"; + regulator-name = "wl"; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + startup-delay-us = <100>; + enable-active-high; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +/* off-board header */ +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + accelerometer@19 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_accel>; + compatible = "st,lis2de12"; + reg = <0x19>; + st,drdy-int-pin = <1>; + interrupt-parent = <&gpio4>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "INT1"; + }; +}; + +/* off-board header */ +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +/* off-board header */ +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MM_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + +/* GPS */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* bluetooth HCI */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>; + cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; + rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + shutdown-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + }; +}; + +/* RS232 */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + vbus-supply = <®_usb_otg2_vbus>; + status = "okay"; +}; + +/* SDIO WiFi */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_wifi_en>; + status = "okay"; +}; + +/* microSD */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* PLUG_TEST */ + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x40000041 /* PCI_USBSEL */ + MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000041 /* PCIE_WDIS# */ + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x40000041 /* DIO0 */ + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x40000041 /* DIO1 */ + MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x40000104 /* RS485_TERM */ + MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x40000104 /* RS485 */ + MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x40000104 /* RS485_HALF */ + >; + }; + + pinctrl_accel: accelgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x159 + >; + }; + + pinctrl_bten: btengrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 + >; + }; + + pinctrl_gpio_leds: gpioledgrp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x19 + MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x19 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41 + >; + }; + + pinctrl_reg_wl: regwlgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x41 + >; + }; + + pinctrl_reg_usb1_en: regusb1grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x41 + MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x41 + >; + }; + + pinctrl_reg_usb2_en: regusb2grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x41 + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 + MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 + MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6 + MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 + MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6 + >; + }; + + pinctrl_spi2: spi2grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6 + MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6 + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6 + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 + MX8MM_IOMUXC_ECSPI1_MISO_GPIO5_IO8 0x140 + MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x140 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140 + MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4 + MX8MM_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0x1d0 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index c824f2615fe8..6bf1d15ba16a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -257,10 +257,12 @@ }; soc@0 { - compatible = "simple-bus"; + compatible = "fsl,imx8mm-soc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x0 0x3e000000>; + nvmem-cells = <&imx8mm_uid>; + nvmem-cell-names = "soc_unique_id"; aips1: bus@30000000 { compatible = "fsl,aips-bus", "simple-bus"; @@ -518,9 +520,17 @@ #address-cells = <1>; #size-cells = <1>; + imx8mm_uid: unique-id@410 { + reg = <0x4 0x8>; + }; + cpu_speed_grade: speed-grade@10 { reg = <0x10 4>; }; + + fec_mac_address: mac-address@90 { + reg = <0x90 6>; + }; }; anatop: anatop@30360000 { @@ -909,13 +919,18 @@ assigned-clocks = <&clk IMX8MM_CLK_ENET_AXI>, <&clk IMX8MM_CLK_ENET_TIMER>, <&clk IMX8MM_CLK_ENET_REF>, - <&clk IMX8MM_CLK_ENET_TIMER>; + <&clk IMX8MM_CLK_ENET_PHY_REF>; assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>, <&clk IMX8MM_SYS_PLL2_100M>, - <&clk IMX8MM_SYS_PLL2_125M>; - assigned-clock-rates = <0>, <0>, <125000000>, <100000000>; + <&clk IMX8MM_SYS_PLL2_125M>, + <&clk IMX8MM_SYS_PLL2_50M>; + assigned-clock-rates = <0>, <100000000>, <125000000>, <0>; fsl,num-tx-queues = <3>; fsl,num-rx-queues = <3>; + nvmem-cells = <&fec_mac_address>; + nvmem-cell-names = "mac-address"; + nvmem_macaddr_swap; + fsl,stop-mode = <&gpr 0x10 3>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi new file mode 100644 index 000000000000..376ca8ff7213 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi @@ -0,0 +1,307 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2020 Compass Electronics Group, LLC + */ + +/ { + leds { + compatible = "gpio-leds"; + + led-0 { + label = "gen_led0"; + gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-1 { + label = "gen_led1"; + gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-2 { + label = "gen_led2"; + gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led3>; + label = "heartbeat"; + gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_audio: regulator-audio { + compatible = "regulator-fixed"; + regulator-name = "3v3_aud"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca6416_1 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + regulator-name = "vsd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg_vbus: regulator-usb { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb_otg>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + sound { + compatible = "fsl,imx-audio-wm8962"; + model = "wm8962-audio"; + audio-cpu = <&sai3>; + audio-codec = <&wm8962>; + audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "AMIC", "MICBIAS", + "IN3R", "AMIC"; + }; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_espi2>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "okay"; + + eeprom@0 { + compatible = "microchip,at25160bn", "atmel,at25"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpha; + spi-cpol; + pagesize = <32>; + size = <2048>; + address-width = <16>; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + pca6416_0: gpio@20 { + compatible = "nxp,pcal6416"; + reg = <0x20>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcal6414>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio4>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + }; + + pca6416_1: gpio@21 { + compatible = "nxp,pcal6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio4>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + }; + + wm8962: audio-codec@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&clk IMX8MN_CLK_SAI3_ROOT>; + clock-names = "xclk"; + DCVDD-supply = <®_audio>; + DBVDD-supply = <®_audio>; + AVDD-supply = <®_audio>; + CPVDD-supply = <®_audio>; + MICVDD-supply = <®_audio>; + PLLVDD-supply = <®_audio>; + SPKVDD1-supply = <®_audio>; + SPKVDD2-supply = <®_audio>; + gpio-cfg = < + 0x0000 /* 0:Default */ + 0x0000 /* 1:Default */ + 0x0000 /* 2:FN_DMICCLK */ + 0x0000 /* 3:Default */ + 0x0000 /* 4:FN_DMICCDAT */ + 0x0000 /* 5:Default */ + >; + }; +}; + +&easrc { + fsl,asrc-rate = <48000>; + status = "okay"; +}; + +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MN_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart2 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + assigned-clocks = <&clk IMX8MN_CLK_UART3>; + assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg_vbus>; + disable-over-current; + dr_mode="otg"; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&iomuxc { + pinctrl_espi2: espi2grp { + fsl,pins = < + MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82 + MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82 + MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82 + MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x41 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_led3: led3grp { + fsl,pins = < + MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x41 + >; + }; + + pinctrl_pcal6414: pcal6414-gpiogrp { + fsl,pins = < + MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x19 + >; + }; + + pinctrl_reg_usb_otg: reg-otggrp { + fsl,pins = < + MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29 0x19 + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 + MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 + MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6 + MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 + MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x40 + MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x40 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MN_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x41 + MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts new file mode 100644 index 000000000000..1392ce02587b --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2020 Compass Electronics Group, LLC + */ + +/dts-v1/; + +#include "imx8mn.dtsi" +#include "imx8mn-beacon-som.dtsi" +#include "imx8mn-beacon-baseboard.dtsi" + +/ { + model = "Beacon EmbeddedWorks i.MX8M Nano Development Kit"; + compatible = "beacon,imx8mn-beacon-kit", "fsl,imx8mn"; + + chosen { + stdout-path = &uart2; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi new file mode 100644 index 000000000000..de2cd0e3201c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi @@ -0,0 +1,466 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2020 Compass Electronics Group, LLC + */ + +/ { + aliases { + rtc0 = &rtc; + rtc1 = &snvs_rtc; + spi0 = &flexspi; + }; + + usdhc1_pwrseq: usdhc1_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1_gpio>; + reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; + clocks = <&osc_32k>; + clock-names = "ext_clock"; + post-power-on-delay-ms = <80>; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; +}; + +&A53_0 { + cpu-supply = <&buck2_reg>; +}; + +&A53_1 { + cpu-supply = <&buck2_reg>; +}; + +&A53_2 { + cpu-supply = <&buck2_reg>; +}; + +&A53_3 { + cpu-supply = <&buck2_reg>; +}; + +/* DDR controller is running LPDDR at 800MHz which requires 0.95V */ +&a53_opp_table { + opp-1200000000 { + opp-microvolt = <950000>; + }; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-800M { + opp-hz = /bits/ 64 <800000000>; + }; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + phy-supply = <&buck6_reg>; + phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; +}; + +&flexspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi>; + status = "okay"; + + flash@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <80000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@4b { + compatible = "rohm,bd71847"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + rohm,reset-snvs-powered; + + regulators { + buck1_reg: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + buck2_reg: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + + buck3_reg: BUCK3 { + // BUCK5 in datasheet + regulator-name = "buck3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + // BUCK6 in datasheet + regulator-name = "buck4"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5_reg: BUCK5 { + // BUCK7 in datasheet + regulator-name = "buck5"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6_reg: BUCK6 { + // BUCK8 in datasheet + regulator-name = "buck6"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + eeprom@50 { + compatible = "microchip,24c64", "atmel,24c64"; + pagesize = <32>; + read-only; /* Manufacturing EEPROM programmed at factory */ + reg = <0x50>; + }; + + rtc: rtc@51 { + compatible = "nxp,pcf85263"; + reg = <0x51>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + assigned-clocks = <&clk IMX8MN_CLK_UART1>; + assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>; + clocks = <&osc_32k>; + max-speed = <4000000>; + clock-names = "extclk"; + }; +}; + +&usdhc1 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <4>; + non-removable; + cap-power-off-card; + pm-ignore-notify; + keep-power-in-suspend; + mmc-pwrseq = <&usdhc1_pwrseq>; + status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan>; + interrupt-parent = <&gpio2>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + + pinctrl_flexspi: flexspigrp { + fsl,pins = < + MX8MN_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x1c2 + MX8MN_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 + MX8MN_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 + MX8MN_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 + MX8MN_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 + MX8MN_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 + >; + }; + + pinctrl_pmic: pmicirqgrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + MX8MN_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x140 + MX8MN_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x140 + MX8MN_IOMUXC_SD1_DATA4_GPIO2_IO6 0x19 + MX8MN_IOMUXC_SD1_DATA5_GPIO2_IO7 0x19 + MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8 0x19 + MX8MN_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x141 + >; + }; + + pinctrl_usdhc1_gpio: usdhc1gpiogrp { + fsl,pins = < + MX8MN_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x41 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 + MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x194 + MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 + MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4 + MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4 + MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4 + MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x196 + MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 + MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6 + MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6 + MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6 + MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; + + pinctrl_wlan: wlangrp { + fsl,pins = < + MX8MN_IOMUXC_SD1_DATA7_GPIO2_IO9 0x111 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi index 76d042a4cf09..a0dddba2e561 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi @@ -46,6 +46,40 @@ pinctrl-0 = <&pinctrl_ir>; linux,autosuspend-period = <125>; }; + + wm8524: audio-codec { + #sound-dai-cells = <0>; + compatible = "wlf,wm8524"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_wlf>; + wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MN_CLK_SAI3_ROOT>; + clock-names = "mclk"; + }; + + sound-wm8524 { + compatible = "fsl,imx-audio-wm8524"; + model = "wm8524-audio"; + audio-cpu = <&sai3>; + audio-codec = <&wm8524>; + audio-asrc = <&easrc>; + audio-routing = + "Line Out Jack", "LINEVOUTL", + "Line Out Jack", "LINEVOUTR"; + }; + + sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif1>; + spdif-out; + spdif-in; + }; +}; + +&easrc { + fsl,asrc-rate = <48000>; + status = "okay"; }; &fec1 { @@ -124,10 +158,29 @@ }; }; +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MN_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + &snvs_pwrkey { status = "okay"; }; +&spdif1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif1>; + assigned-clocks = <&clk IMX8MN_CLK_SPDIF1>; + assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + &uart2 { /* console */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; @@ -210,6 +263,12 @@ >; }; + pinctrl_gpio_wlf: gpiowlfgrp { + fsl,pins = < + MX8MN_IOMUXC_I2C4_SDA_GPIO5_IO21 0xd6 + >; + }; + pinctrl_ir: irgrp { fsl,pins = < MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x4f @@ -249,6 +308,22 @@ >; }; + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 + MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 + MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6 + MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 + >; + }; + + pinctrl_spdif1: spdif1grp { + fsl,pins = < + MX8MN_IOMUXC_SPDIF_TX_SPDIF1_OUT 0xd6 + MX8MN_IOMUXC_SPDIF_RX_SPDIF1_IN 0xd6 + >; + }; + pinctrl_typec1: typec1grp { fsl,pins = < MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11 0x159 diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index 2a79e89f821e..16ea50089567 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -241,10 +241,12 @@ }; soc@0 { - compatible = "simple-bus"; + compatible = "fsl,imx8mn-soc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x0 0x3e000000>; + nvmem-cells = <&imx8mn_uid>; + nvmem-cell-names = "soc_unique_id"; aips1: bus@30000000 { compatible = "fsl,aips-bus", "simple-bus"; @@ -531,9 +533,17 @@ #address-cells = <1>; #size-cells = <1>; + imx8mn_uid: unique-id@410 { + reg = <0x4 0x8>; + }; + cpu_speed_grade: speed-grade@10 { reg = <0x10 4>; }; + + fec_mac_address: mac-address@90 { + reg = <0x90 6>; + }; }; anatop: anatop@30360000 { @@ -581,7 +591,9 @@ <&clk IMX8MN_CLK_NOC>, <&clk IMX8MN_CLK_AUDIO_AHB>, <&clk IMX8MN_CLK_IPG_AUDIO_ROOT>, - <&clk IMX8MN_SYS_PLL3>; + <&clk IMX8MN_SYS_PLL3>, + <&clk IMX8MN_AUDIO_PLL1>, + <&clk IMX8MN_AUDIO_PLL2>; assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_800M>, <&clk IMX8MN_ARM_PLL_OUT>, <&clk IMX8MN_SYS_PLL3_OUT>, @@ -589,7 +601,9 @@ assigned-clock-rates = <0>, <0>, <0>, <400000000>, <400000000>, - <600000000>; + <600000000>, + <393216000>, + <361267200>; }; src: reset-controller@30390000 { @@ -875,6 +889,19 @@ status = "disabled"; }; + flexspi: spi@30bb0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,imx8mm-fspi"; + reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>; + reg-names = "fspi_base", "fspi_mmap"; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_QSPI_ROOT>, + <&clk IMX8MN_CLK_QSPI_ROOT>; + clock-names = "fspi", "fspi_en"; + status = "disabled"; + }; + sdma1: dma-controller@30bd0000 { compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma"; reg = <0x30bd0000 0x10000>; @@ -903,13 +930,18 @@ assigned-clocks = <&clk IMX8MN_CLK_ENET_AXI>, <&clk IMX8MN_CLK_ENET_TIMER>, <&clk IMX8MN_CLK_ENET_REF>, - <&clk IMX8MN_CLK_ENET_TIMER>; + <&clk IMX8MN_CLK_ENET_PHY_REF>; assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>, <&clk IMX8MN_SYS_PLL2_100M>, - <&clk IMX8MN_SYS_PLL2_125M>; - assigned-clock-rates = <0>, <0>, <125000000>, <100000000>; + <&clk IMX8MN_SYS_PLL2_125M>, + <&clk IMX8MN_SYS_PLL2_50M>; + assigned-clock-rates = <0>, <100000000>, <125000000>, <0>; fsl,num-tx-queues = <3>; fsl,num-rx-queues = <3>; + nvmem-cells = <&fec_mac_address>; + nvmem-cell-names = "mac-address"; + nvmem_macaddr_swap; + fsl,stop-mode = <&gpr 0x10 3>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index b10dce8767a4..7db4273cc88b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -127,6 +127,21 @@ status = "okay"; }; +&usb3_phy1 { + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; + +&usb_dwc3_1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_vbus>; + dr_mode = "host"; + status = "okay"; +}; + &usdhc2 { assigned-clocks = <&clk IMX8MP_CLK_USDHC2>; assigned-clock-rates = <400000000>; @@ -232,6 +247,12 @@ >; }; + pinctrl_usb1_vbus: usb1grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x19 + >; + }; + pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts new file mode 100644 index 000000000000..0e1a6d953389 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 PHYTEC Messtechnik GmbH + * Author: Teresa Remmet <t.remmet@phytec.de> + */ + +/dts-v1/; + +#include <dt-bindings/leds/leds-pca9532.h> +#include <dt-bindings/pwm/pwm.h> +#include "imx8mp-phycore-som.dtsi" + +/ { + model = "PHYTEC phyBOARD-Pollux i.MX8MP"; + compatible = "phytec,imx8mp-phyboard-pollux-rdk", + "phytec,imx8mp-phycore-som", "fsl,imx8mp"; + + chosen { + stdout-path = &uart2; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100>; + off-on-delay-us = <12000>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + leds@62 { + compatible = "nxp,pca9533"; + reg = <0x62>; + + led1 { + type = <PCA9532_TYPE_LED>; + }; + + led2 { + type = <PCA9532_TYPE_LED>; + }; + + led3 { + type = <PCA9532_TYPE_LED>; + }; + }; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +/* debug console */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +/* SD-Card */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_pins>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_pins>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_pins>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + bus-width = <4>; + status = "okay"; +}; + +&iomuxc { + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c3 + MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x1e3 + MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x1e3 + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49 + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49 + >; + }; + + pinctrl_usdhc2_pins: usdhc2-gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi new file mode 100644 index 000000000000..44a8c2337cee --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi @@ -0,0 +1,293 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 PHYTEC Messtechnik GmbH + * Author: Teresa Remmet <t.remmet@phytec.de> + */ + +#include <dt-bindings/net/ti-dp83867.h> +#include "imx8mp.dtsi" + +/ { + model = "PHYTEC phyCORE-i.MX8MP"; + compatible = "phytec,imx8mp-phycore-som", "fsl,imx8mp"; + + aliases { + rtc0 = &rv3028; + rtc1 = &snvs_rtc; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; +}; + +&A53_0 { + cpu-supply = <&buck2>; +}; + +&A53_1 { + cpu-supply = <&buck2>; +}; + +&A53_2 { + cpu-supply = <&buck2>; +}; + +&A53_3 { + cpu-supply = <&buck2>; +}; + +/* ethernet 1 */ +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy1>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + enet-phy-lane-no-swap; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pmic: pmic@25 { + reg = <0x25>; + compatible = "nxp,pca9450c"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio4>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + + regulators { + buck1: BUCK1 { + regulator-compatible = "BUCK1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck2: BUCK2 { + regulator-compatible = "BUCK2"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck4: BUCK4 { + regulator-compatible = "BUCK4"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: BUCK5 { + regulator-compatible = "BUCK5"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6: BUCK6 { + regulator-compatible = "BUCK6"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { + regulator-compatible = "LDO1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2: LDO2 { + regulator-compatible = "LDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3: LDO3 { + regulator-compatible = "LDO3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: LDO4 { + regulator-compatible = "LDO4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: LDO5 { + regulator-compatible = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + }; + + rv3028: rtc@52 { + compatible = "microcrystal,rv3028"; + reg = <0x52>; + trickle-resistor-ohms = <3000>; + }; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec: fecgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3 + MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3 + MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91 + MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91 + MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91 + MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91 + MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91 + MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f + MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f + MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f + MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f + MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f + MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x11 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3 + MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x1e3 + MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x1e3 + >; + }; + + pinctrl_pmic: pmicirqgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x141 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 23f5a5e37167..c7523fd4eae9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -218,10 +218,12 @@ }; soc@0 { - compatible = "simple-bus"; + compatible = "fsl,imx8mp-soc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x0 0x3e000000>; + nvmem-cells = <&imx8mp_uid>; + nvmem-cell-names = "soc_unique_id"; aips1: bus@30000000 { compatible = "fsl,aips-bus", "simple-bus"; @@ -328,9 +330,17 @@ #address-cells = <1>; #size-cells = <1>; + imx8mp_uid: unique-id@420 { + reg = <0x8 0x8>; + }; + cpu_speed_grade: speed-grade@10 { reg = <0x10 4>; }; + + eth_mac1: mac-address@90 { + reg = <0x90 6>; + }; }; anatop: anatop@30360000 { @@ -762,13 +772,18 @@ assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>, <&clk IMX8MP_CLK_ENET_TIMER>, <&clk IMX8MP_CLK_ENET_REF>, - <&clk IMX8MP_CLK_ENET_TIMER>; + <&clk IMX8MP_CLK_ENET_PHY_REF>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>, <&clk IMX8MP_SYS_PLL2_100M>, - <&clk IMX8MP_SYS_PLL2_125M>; - assigned-clock-rates = <0>, <0>, <125000000>, <100000000>; + <&clk IMX8MP_SYS_PLL2_125M>, + <&clk IMX8MP_SYS_PLL2_50M>; + assigned-clock-rates = <0>, <100000000>, <125000000>, <0>; fsl,num-tx-queues = <3>; fsl,num-rx-queues = <3>; + nvmem-cells = <ð_mac1>; + nvmem-cell-names = "mac-address"; + fsl,stop-mode = <&gpr 0x10 3>; + nvmem_macaddr_swap; status = "disabled"; }; }; @@ -788,5 +803,87 @@ reg = <0x3d800000 0x400000>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; }; + + usb3_phy0: usb-phy@381f0040 { + compatible = "fsl,imx8mp-usb-phy"; + reg = <0x381f0040 0x40>; + clocks = <&clk IMX8MP_CLK_USB_PHY_ROOT>; + clock-names = "phy"; + assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>; + assigned-clock-parents = <&clk IMX8MP_CLK_24M>; + #phy-cells = <0>; + status = "disabled"; + }; + + usb3_0: usb@32f10100 { + compatible = "fsl,imx8mp-dwc3"; + reg = <0x32f10100 0x8>; + clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, + <&clk IMX8MP_CLK_USB_ROOT>; + clock-names = "hsio", "suspend"; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + dma-ranges = <0x40000000 0x40000000 0xc0000000>; + ranges; + status = "disabled"; + + usb_dwc3_0: dwc3@38100000 { + compatible = "snps,dwc3"; + reg = <0x38100000 0x10000>; + clocks = <&clk IMX8MP_CLK_HSIO_AXI>, + <&clk IMX8MP_CLK_USB_CORE_REF>, + <&clk IMX8MP_CLK_USB_ROOT>; + clock-names = "bus_early", "ref", "suspend"; + assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>; + assigned-clock-rates = <500000000>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb3_phy0>, <&usb3_phy0>; + phy-names = "usb2-phy", "usb3-phy"; + snps,dis-u2-freeclk-exists-quirk; + }; + + }; + + usb3_phy1: usb-phy@382f0040 { + compatible = "fsl,imx8mp-usb-phy"; + reg = <0x382f0040 0x40>; + clocks = <&clk IMX8MP_CLK_USB_PHY_ROOT>; + clock-names = "phy"; + assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>; + assigned-clock-parents = <&clk IMX8MP_CLK_24M>; + #phy-cells = <0>; + }; + + usb3_1: usb@32f10108 { + compatible = "fsl,imx8mp-dwc3"; + reg = <0x32f10108 0x8>; + clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, + <&clk IMX8MP_CLK_USB_ROOT>; + clock-names = "hsio", "suspend"; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + dma-ranges = <0x40000000 0x40000000 0xc0000000>; + ranges; + status = "disabled"; + + usb_dwc3_1: dwc3@38200000 { + compatible = "snps,dwc3"; + reg = <0x38200000 0x10000>; + clocks = <&clk IMX8MP_CLK_HSIO_AXI>, + <&clk IMX8MP_CLK_USB_CORE_REF>, + <&clk IMX8MP_CLK_USB_ROOT>; + clock-names = "bus_early", "ref", "suspend"; + assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>; + assigned-clock-rates = <500000000>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb3_phy1>, <&usb3_phy1>; + phy-names = "usb2-phy", "usb3-phy"; + snps,dis-u2-freeclk-exists-quirk; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts index af139b283daf..dd217a0760e9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts @@ -244,11 +244,6 @@ cpu-supply = <&buck2_reg>; }; -&clk { - assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>; - assigned-clock-rates = <786432000>, <722534400>; -}; - &dphy { status = "okay"; }; @@ -298,6 +293,7 @@ regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; regulator-boot-on; + regulator-always-on; regulator-ramp-delay = <1250>; rohm,dvs-run-voltage = <900000>; rohm,dvs-idle-voltage = <850000>; @@ -319,6 +315,7 @@ regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; regulator-boot-on; + regulator-enable-ramp-delay = <200>; rohm,dvs-run-voltage = <900000>; }; @@ -334,6 +331,7 @@ regulator-min-microvolt = <700000>; regulator-max-microvolt = <1350000>; regulator-boot-on; + regulator-always-on; }; buck6_reg: BUCK6 { @@ -341,6 +339,7 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3300000>; regulator-boot-on; + regulator-always-on; }; buck7_reg: BUCK7 { @@ -348,6 +347,7 @@ regulator-min-microvolt = <1605000>; regulator-max-microvolt = <1995000>; regulator-boot-on; + regulator-always-on; }; buck8_reg: BUCK8 { @@ -355,6 +355,7 @@ regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; regulator-boot-on; + regulator-always-on; }; ldo1_reg: LDO1 { @@ -380,6 +381,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; + regulator-always-on; }; ldo4_reg: LDO4 { @@ -387,12 +389,14 @@ regulator-min-microvolt = <900000>; regulator-max-microvolt = <1800000>; regulator-boot-on; + regulator-always-on; }; ldo5_reg: LDO5 { regulator-name = "ldo5"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; ldo6_reg: LDO6 { @@ -400,6 +404,7 @@ regulator-min-microvolt = <900000>; regulator-max-microvolt = <1800000>; regulator-boot-on; + regulator-always-on; }; ldo7_reg: LDO7 { @@ -407,6 +412,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; + regulator-always-on; }; }; }; @@ -886,6 +892,10 @@ status = "okay"; }; +&snvs_rtc { + status = "disabled"; +}; + &sai2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai2>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts index 6704ea2c72a3..0d38327043f8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts @@ -10,6 +10,12 @@ compatible = "purism,librem5r3", "purism,librem5", "fsl,imx8mq"; }; +&a53_opp_table { + opp-1000000000 { + opp-microvolt = <1000000>; + }; +}; + &accel_gyro { mount-matrix = "1", "0", "0", "0", "1", "0", diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts new file mode 100644 index 000000000000..cbfb49aa2563 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2020 Purism SPC <kernel@puri.sm> + +/dts-v1/; + +#include "imx8mq-librem5.dtsi" + +/ { + model = "Purism Librem 5r4"; + compatible = "purism,librem5r4", "purism,librem5", "fsl,imx8mq"; +}; + +&accel_gyro { + mount-matrix = "1", "0", "0", + "0", "1", "0", + "0", "0", "-1"; +}; + +&bat { + maxim,rsns-microohm = <1667>; +}; + +&bq25895 { + ti,battery-regulation-voltage = <4200000>; /* uV */ + ti,charge-current = <1500000>; /* uA */ + ti,termination-current = <144000>; /* uA */ +}; + +&led_backlight { + led-max-microamp = <25000>; +}; + +&proximity { + proximity-near-level = <10>; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi index 64fc546b110f..06a4799b6aeb 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi @@ -82,6 +82,20 @@ enable-active-high; }; + reg_lcd_1v8: regulator-lcd-1v8 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dsien>; + regulator-name = "LCD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <®_vdd_1v8>; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + /* Otherwise i2c3 is not functional */ + regulator-always-on; + }; + reg_lcd_3v4: regulator-lcd-3v4 { compatible = "regulator-fixed"; regulator-name = "LCD_3V4"; @@ -99,6 +113,14 @@ regulator-max-microvolt = <3300000>; }; + reg_vdd_1v8: regulator-vdd-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&buck7_reg>; + }; + reg_vdd_3v3: regulator-vdd-3v3 { compatible = "regulator-fixed"; regulator-name = "VDD_3V3"; @@ -106,13 +128,6 @@ regulator-max-microvolt = <3300000>; }; - reg_vdd_1v8: regulator-vdd-1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - reg_vsys_3v4: regulator-vsys-3v4 { compatible = "regulator-fixed"; regulator-name = "VSYS_3V4"; @@ -275,7 +290,7 @@ pinctrl_charger_in: chargeringrp { fsl,pins = < /* CHRG_INT */ - MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x00 + MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x80 /* CHG_STATUS_B */ MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0 0x80 >; @@ -295,6 +310,17 @@ >; }; + pinctrl_dsirst: dsirstgrp { + fsl,pins = < + /* DSI_RST */ + MX8MQ_IOMUXC_ENET_RD3_GPIO1_IO29 0x83 + /* DSI_TE */ + MX8MQ_IOMUXC_ENET_RD2_GPIO1_IO28 0x83 + /* TP_RST */ + MX8MQ_IOMUXC_ENET_RX_CTL_GPIO1_IO24 0x83 + >; + }; + pinctrl_ecspi1: ecspigrp { fsl,pins = < MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x83 @@ -458,6 +484,13 @@ >; }; + pinctrl_touch: touchgrp { + fsl,pins = < + /* TP_INT */ + MX8MQ_IOMUXC_ENET_RD1_GPIO1_IO27 0x80 + >; + }; + pinctrl_typec: typecgrp { fsl,pins = < /* TYPEC_MUX_EN */ @@ -649,6 +682,7 @@ regulator-name = "buck1"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; + regulator-boot-on; regulator-ramp-delay = <1250>; rohm,dvs-run-voltage = <900000>; rohm,dvs-idle-voltage = <850000>; @@ -660,6 +694,7 @@ regulator-name = "buck2"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; + regulator-boot-on; regulator-ramp-delay = <1250>; rohm,dvs-run-voltage = <1000000>; rohm,dvs-idle-voltage = <900000>; @@ -670,8 +705,8 @@ regulator-name = "buck3"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; + regulator-boot-on; rohm,dvs-run-voltage = <900000>; - regulator-always-on; }; buck4_reg: BUCK4 { @@ -685,6 +720,7 @@ regulator-name = "buck5"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1350000>; + regulator-boot-on; regulator-always-on; }; @@ -692,6 +728,7 @@ regulator-name = "buck6"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3300000>; + regulator-boot-on; regulator-always-on; }; @@ -699,6 +736,7 @@ regulator-name = "buck7"; regulator-min-microvolt = <1605000>; regulator-max-microvolt = <1995000>; + regulator-boot-on; regulator-always-on; }; @@ -706,6 +744,7 @@ regulator-name = "buck8"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; + regulator-boot-on; regulator-always-on; }; @@ -713,6 +752,7 @@ regulator-name = "ldo1"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3300000>; + regulator-boot-on; /* leave on for snvs power button */ regulator-always-on; }; @@ -721,6 +761,7 @@ regulator-name = "ldo2"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; + regulator-boot-on; /* leave on for snvs power button */ regulator-always-on; }; @@ -729,6 +770,7 @@ regulator-name = "ldo3"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; + regulator-boot-on; regulator-always-on; }; @@ -736,6 +778,7 @@ regulator-name = "ldo4"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1800000>; + regulator-boot-on; regulator-always-on; }; @@ -752,6 +795,7 @@ regulator-name = "ldo6"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1800000>; + regulator-boot-on; regulator-always-on; }; @@ -760,6 +804,7 @@ regulator-name = "ldo7"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; + regulator-boot-on; regulator-always-on; }; }; @@ -796,12 +841,12 @@ compatible = "tps65132"; reg = <0x3e>; - outp { + reg_lcd_avdd: outp { regulator-name = "LCD_AVDD"; vin-supply = <®_lcd_3v4>; }; - outn { + reg_lcd_avee: outn { regulator-name = "LCD_AVEE"; vin-supply = <®_lcd_3v4>; }; @@ -879,10 +924,13 @@ touchscreen@38 { compatible = "edt,edt-ft5506"; reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch>; interrupt-parent = <&gpio1>; interrupts = <27 IRQ_TYPE_EDGE_FALLING>; touchscreen-size-x = <720>; touchscreen-size-y = <1440>; + vcc-supply = <®_lcd_1v8>; }; }; @@ -919,6 +967,45 @@ ti,use-vinmin-threshold = <1>; /* enable VINDPM */ ti,vinmin-threshold = <3900000>; /* uV */ monitored-battery = <&bat>; + power-supplies = <&typec_pd>; + }; +}; + +&lcdif { + status = "okay"; +}; + +&mipi_dsi { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + lcd_panel: panel@0 { + compatible = "mantix,mlaf057we51-x"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dsirst>; + avdd-supply = <®_lcd_avdd>; + avee-supply = <®_lcd_avee>; + vddi-supply = <®_lcd_1v8>; + backlight = <&backlight_dsi>; + reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + + port { + panel_in: endpoint { + remote-endpoint = <&mipi_dsi_out>; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + + mipi_dsi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; }; }; @@ -1072,6 +1159,8 @@ }; &usdhc1 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; + assigned-clock-rates = <400000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1_100mhz>; @@ -1084,6 +1173,8 @@ }; &usdhc2 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; + assigned-clock-rates = <200000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>; pinctrl-1 = <&pinctrl_usdhc2_100mhz>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts index bfad4b885905..631e01c1b9fd 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts @@ -10,6 +10,56 @@ / { model = "ZII Ultra RMB3 Board"; compatible = "zii,imx8mq-ultra-rmb3", "zii,imx8mq-ultra", "fsl,imx8mq"; + + sound1 { + compatible = "simple-audio-card"; + simple-audio-card,name = "front"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound1_codec>; + simple-audio-card,frame-master = <&sound1_codec>; + simple-audio-card,widgets = + "Headphone", "Headphone Jack Front"; + simple-audio-card,routing = + "Headphone Jack Front", "HPA1 HPLEFT", + "Headphone Jack Front", "HPA1 HPRIGHT", + "HPA1 LEFTIN", "HPL", + "HPA1 RIGHTIN", "HPR"; + simple-audio-card,aux-devs = <&hpa1>; + + sound1_cpu: simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + sound1_codec: simple-audio-card,codec { + sound-dai = <&codec1>; + clocks = <&cs2000>; + }; + }; + + sound2 { + compatible = "simple-audio-card"; + simple-audio-card,name = "periph"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound2_codec>; + simple-audio-card,frame-master = <&sound2_codec>; + simple-audio-card,widgets = + "Headphone", "Headphone Jack Back"; + simple-audio-card,routing = + "Headphone Jack Back", "HPA1 HPLEFT", + "Headphone Jack Back", "HPA1 HPRIGHT", + "HPA1 LEFTIN", "HPL", + "HPA1 RIGHTIN", "HPR"; + simple-audio-card,aux-devs = <&hpa2>; + + sound2_cpu: simple-audio-card,cpu { + sound-dai = <&sai3>; + }; + + sound2_codec: simple-audio-card,codec { + sound-dai = <&codec2>; + clocks = <&cs2000>; + }; + }; }; &ecspi1 { @@ -27,6 +77,27 @@ }; }; +&hpa2 { + sound-name-prefix = "HPA1"; +}; + +&i2c1 { + codec2: codec@18 { + compatible = "ti,tlv320dac3100"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_codec2>; + reg = <0x18>; + #sound-dai-cells = <0>; + HPVDD-supply = <®_3p3v>; + SPRVDD-supply = <®_3p3v>; + SPLVDD-supply = <®_3p3v>; + AVDD-supply = <®_3p3v>; + IOVDD-supply = <®_3p3v>; + DVDD-supply = <&vgen4_reg>; + reset-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; + }; +}; + &i2c2 { temp-sense@48 { compatible = "national,lm75"; @@ -56,6 +127,8 @@ touchscreen-inverted-x; touchscreen-swapped-x-y; syna,sensor-type = <1>; + syna,delta-x-threshold = <5>; + syna,delta-y-threshold = <10>; }; rmi4-f12@12 { @@ -79,11 +152,23 @@ }; }; +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + status = "okay"; +}; + &usbhub { swap-dx-lanes = <0>; }; &iomuxc { + pinctrl_codec2: dac2grp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x41 + >; + }; + pinctrl_ecspi1: ecspi1grp { fsl,pins = < MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19 @@ -92,4 +177,12 @@ MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 >; }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MQ_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 + MX8MQ_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 + MX8MQ_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 + >; + }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts index 173b9e9b2bbd..f6130167a1c7 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts @@ -10,6 +10,36 @@ / { model = "ZII Ultra Zest Board"; compatible = "zii,imx8mq-ultra-zest", "zii,imx8mq-ultra", "fsl,imx8mq"; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "front"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_codec>; + simple-audio-card,frame-master = <&sound_codec>; + simple-audio-card,widgets = + "Headphone", "Headphone Jack Front", + "Headphone", "Headphone Jack Back"; + simple-audio-card,routing = + "Headphone Jack Front", "HPA1 HPLEFT", + "Headphone Jack Front", "HPA1 HPRIGHT", + "Headphone Jack Back", "HPA2 HPLEFT", + "Headphone Jack Back", "HPA2 HPRIGHT", + "HPA1 LEFTIN", "HPL", + "HPA1 RIGHTIN", "HPR", + "HPA2 LEFTIN", "HPL", + "HPA2 RIGHTIN", "HPR"; + simple-audio-card,aux-devs = <&hpa1>, <&hpa2>; + + sound_cpu: simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + sound_codec: simple-audio-card,codec { + sound-dai = <&codec1>; + clocks = <&cs2000>; + }; + }; }; &i2c4 { diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi index fa7a041ffcfd..4dc8383478ee 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi @@ -77,6 +77,15 @@ regulator-always-on; }; + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + vin-supply = <®_3p3_main>; + regulator-name = "GEN_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + reg_usdhc2_vmmc: regulator-vsd-3v3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_usdhc2>; @@ -102,6 +111,18 @@ 900000 0x0>; regulator-always-on; }; + + cs2000_ref: cs2000-ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + cs2000_in_dummy: cs2000-in-dummy { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; }; &A53_0 { @@ -283,9 +304,19 @@ reg = <0x32>; interrupt-parent = <&gpio3>; interrupts = <17 IRQ_TYPE_EDGE_BOTH>, - <18 IRQ_TYPE_EDGE_BOTH>; + <18 IRQ_TYPE_EDGE_FALLING>; interrupt-names = "a_det", "alert"; }; + + hpa2: amp@60 { + compatible = "ti,tpa6130a2"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpa2>; + reg = <0x60>; + power-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>; + Vdd-supply = <®_5p0_main>; + sound-name-prefix = "HPA2"; + }; }; &i2c2 { @@ -378,11 +409,36 @@ }; }; + codec1: codec@18 { + compatible = "ti,tlv320dac3100"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_codec1>; + reg = <0x18>; + #sound-dai-cells = <0>; + HPVDD-supply = <®_3p3v>; + SPRVDD-supply = <®_3p3v>; + SPLVDD-supply = <®_3p3v>; + AVDD-supply = <®_3p3v>; + IOVDD-supply = <®_3p3v>; + DVDD-supply = <&vgen4_reg>; + reset-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>; + }; + eeprom@54 { compatible = "atmel,24c128"; reg = <0x54>; }; + hpa1: amp@60 { + compatible = "ti,tpa6130a2"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpa1>; + reg = <0x60>; + power-gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>; + Vdd-supply = <®_5p0_main>; + sound-name-prefix = "HPA1"; + }; + ds1341: rtc@68 { compatible = "dallas,ds1341"; reg = <0x68>; @@ -407,6 +463,16 @@ compatible = "zii,rave-wdt"; reg = <0x38>; }; + + cs2000: clkgen@4e { + compatible = "cirrus,cs2000-cp"; + reg = <0x4e>; + #clock-cells = <0>; + clock-names = "clk_in", "ref_clk"; + clocks = <&cs2000_in_dummy>, <&cs2000_ref>; + assigned-clocks = <&cs2000>; + assigned-clock-rates = <24000000>; + }; }; &i2c4 { @@ -416,6 +482,12 @@ status = "okay"; }; +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; @@ -468,6 +540,7 @@ &usb_dwc3_0 { dr_mode = "host"; + maximum-speed = "high-speed"; status = "okay"; }; @@ -478,6 +551,7 @@ &usb_dwc3_1 { dr_mode = "host"; + maximum-speed = "high-speed"; status = "okay"; }; @@ -551,6 +625,12 @@ >; }; + pinctrl_codec1: dac1grp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x41 + >; + }; + pinctrl_fec1: fec1grp { fsl,pins = < MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 @@ -583,29 +663,29 @@ pinctrl_i2c1: i2c1grp { fsl,pins = < - MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f - MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x40000022 + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x400000a2 >; }; pinctrl_i2c2: i2c2grp { fsl,pins = < - MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f - MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f + MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000022 + MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x400000a2 >; }; pinctrl_i2c3: i2c3grp { fsl,pins = < - MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f - MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x40000022 + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x400000a2 >; }; pinctrl_i2c4: i2c4grp { fsl,pins = < - MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x4000007f - MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x4000007f + MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x40000022 + MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x400000a2 >; }; @@ -642,12 +722,32 @@ >; }; + pinctrl_sai2: sai2grp { + fsl,pins = < + MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 + MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 + MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 + >; + }; + pinctrl_switch_irq: switchgrp { fsl,pins = < MX8MQ_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41 >; }; + pinctrl_tpa1: tpa6130-1grp { + fsl,pins = < + MX8MQ_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x41 + >; + }; + + pinctrl_tpa2: tpa6130-2grp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x41 + >; + }; + pinctrl_ts: tsgrp { fsl,pins = < MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x96 diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index a841a023e8e0..17c449e12c2e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -11,6 +11,7 @@ #include "dt-bindings/input/input.h" #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/interconnect/imx8mq.h> #include "imx8mq-pinfunc.h" / { @@ -286,11 +287,13 @@ }; soc@0 { - compatible = "simple-bus"; + compatible = "fsl,imx8mq-soc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x0 0x3e000000>; dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>; + nvmem-cells = <&imx8mq_uid>; + nvmem-cell-names = "soc_unique_id"; bus@30000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; @@ -522,6 +525,8 @@ <&clk IMX8MQ_VIDEO_PLL1>, <&clk IMX8MQ_VIDEO_PLL1_OUT>; assigned-clock-rates = <0>, <0>, <0>, <594000000>; + interconnects = <&noc IMX8MQ_ICM_LCDIF &noc IMX8MQ_ICS_DRAM>; + interconnect-names = "dram"; status = "disabled"; port@0 { @@ -555,9 +560,17 @@ #address-cells = <1>; #size-cells = <1>; + imx8mq_uid: soc-uid@410 { + reg = <0x4 0x8>; + }; + cpu_speed_grade: speed-grade@10 { reg = <0x10 4>; }; + + fec_mac_address: mac-address@90 { + reg = <0x90 6>; + }; }; anatop: syscon@30360000 { @@ -826,6 +839,8 @@ clocks = <&clk IMX8MQ_CLK_ECSPI1_ROOT>, <&clk IMX8MQ_CLK_ECSPI1_ROOT>; clock-names = "ipg", "per"; + dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -838,6 +853,8 @@ clocks = <&clk IMX8MQ_CLK_ECSPI2_ROOT>, <&clk IMX8MQ_CLK_ECSPI2_ROOT>; clock-names = "ipg", "per"; + dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -850,6 +867,8 @@ clocks = <&clk IMX8MQ_CLK_ECSPI3_ROOT>, <&clk IMX8MQ_CLK_ECSPI3_ROOT>; clock-names = "ipg", "per"; + dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -1016,9 +1035,14 @@ reg = <0x30a00300 0x100>; clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>; clock-names = "phy_ref"; - assigned-clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>; - assigned-clock-parents = <&clk IMX8MQ_VIDEO_PLL1_OUT>; - assigned-clock-rates = <24000000>; + assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>, + <&clk IMX8MQ_VIDEO_PLL1_BYPASS>, + <&clk IMX8MQ_CLK_DSI_PHY_REF>, + <&clk IMX8MQ_VIDEO_PLL1>; + assigned-clock-parents = <&clk IMX8MQ_CLK_25M>, + <&clk IMX8MQ_VIDEO_PLL1>, + <&clk IMX8MQ_VIDEO_PLL1_OUT>; + assigned-clock-rates = <0>, <0>, <24000000>, <594000000>; #phy-cells = <0>; power-domains = <&pgc_mipi>; status = "disabled"; @@ -1152,12 +1176,50 @@ <&clk IMX8MQ_CLK_ENET_PHY_REF>; clock-names = "ipg", "ahb", "ptp", "enet_clk_ref", "enet_out"; + assigned-clocks = <&clk IMX8MQ_CLK_ENET_AXI>, + <&clk IMX8MQ_CLK_ENET_TIMER>, + <&clk IMX8MQ_CLK_ENET_REF>, + <&clk IMX8MQ_CLK_ENET_PHY_REF>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>, + <&clk IMX8MQ_SYS2_PLL_100M>, + <&clk IMX8MQ_SYS2_PLL_125M>, + <&clk IMX8MQ_SYS2_PLL_50M>; + assigned-clock-rates = <0>, <100000000>, <125000000>, <0>; fsl,num-tx-queues = <3>; fsl,num-rx-queues = <3>; + nvmem-cells = <&fec_mac_address>; + nvmem-cell-names = "mac-address"; + nvmem_macaddr_swap; + fsl,stop-mode = <&iomuxc_gpr 0x10 3>; status = "disabled"; }; }; + noc: interconnect@32700000 { + compatible = "fsl,imx8mq-noc", "fsl,imx8m-noc"; + reg = <0x32700000 0x100000>; + clocks = <&clk IMX8MQ_CLK_NOC>; + fsl,ddrc = <&ddrc>; + #interconnect-cells = <1>; + operating-points-v2 = <&noc_opp_table>; + + noc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-133M { + opp-hz = /bits/ 64 <133333333>; + }; + + opp-400M { + opp-hz = /bits/ 64 <400000000>; + }; + + opp-800M { + opp-hz = /bits/ 64 <800000000>; + }; + }; + }; + bus@32c00000 { /* AIPS4 */ compatible = "fsl,aips-bus", "simple-bus"; reg = <0x32c00000 0x400000>; @@ -1315,6 +1377,7 @@ <0 0 0 3 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; fsl,max-link-speed = <2>; + linux,pci-domain = <0>; power-domains = <&pgc_pcie>; resets = <&src IMX8MQ_RESET_PCIEPHY>, <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>, @@ -1344,6 +1407,7 @@ <0 0 0 3 &gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 4 &gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; fsl,max-link-speed = <2>; + linux,pci-domain = <1>; power-domains = <&pgc_pcie>; resets = <&src IMX8MQ_RESET_PCIEPHY2>, <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>, diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi index 4338db14c5da..ae1c2abaaf36 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi @@ -6,6 +6,8 @@ * */ +#include <dt-bindings/clock/fsl,qoriq-clockgen.h> + fman0: fman@1a00000 { #address-cells = <1>; #size-cells = <1>; @@ -15,7 +17,7 @@ fman0: fman@1a00000 { reg = <0x0 0x1a00000 0x0 0xfe000>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 3 0>; + clocks = <&clockgen QORIQ_CLK_FMAN 0>; clock-names = "fmanclk"; fsl,qman-channel-range = <0x800 0x10>; ptimer-handle = <&ptp_timer0>; @@ -81,6 +83,6 @@ ptp_timer0: ptp-timer@1afe000 { compatible = "fsl,fman-ptp-timer"; reg = <0x0 0x1afe000 0x0 0x1000>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 3 0>; + clocks = <&clockgen QORIQ_CLK_FMAN 0>; fsl,extts-fifo; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index 49c19c6879f9..cab89dc6f596 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -1113,7 +1113,7 @@ thermal-zones { - cls0: cls0 { + cls0: cls0-thermal { polling-delay = <1000>; polling-delay-passive = <100>; sustainable-power = <4500>; @@ -1122,13 +1122,13 @@ thermal-sensors = <&tsensor 1>; trips { - threshold: trip-point@0 { + threshold: trip-point0 { temperature = <65000>; hysteresis = <1000>; type = "passive"; }; - target: trip-point@1 { + target: trip-point1 { temperature = <75000>; hysteresis = <1000>; type = "passive"; diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi index 85b0dfb35d6d..8830795c8efc 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi @@ -194,6 +194,12 @@ #clock-cells = <1>; }; + iomcu_rst: reset { + compatible = "hisilicon,hi3660-reset"; + hisi,rst-syscon = <&iomcu>; + #reset-cells = <2>; + }; + uart0: serial@fdf02000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0xfdf02000 0x0 0x1000>; @@ -708,5 +714,76 @@ card-detect-delay = <200>; status = "disabled"; }; + + /* I2C */ + i2c0: i2c@ffd71000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xffd71000 0x0 0x1000>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&iomcu HI3670_CLK_GATE_I2C0>; + resets = <&iomcu_rst 0x20 3>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>; + status = "disabled"; + }; + + i2c1: i2c@ffd72000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xffd72000 0x0 0x1000>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&iomcu HI3670_CLK_GATE_I2C1>; + resets = <&iomcu_rst 0x20 4>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>; + status = "disabled"; + }; + + i2c2: i2c@ffd73000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xffd73000 0x0 0x1000>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&iomcu HI3670_CLK_GATE_I2C2>; + resets = <&iomcu_rst 0x20 5>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>; + status = "disabled"; + }; + + i2c3: i2c@fdf0c000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xfdf0c000 0x0 0x1000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&crg_ctrl HI3670_CLK_GATE_I2C3>; + resets = <&crg_rst 0x78 7>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pmx_func &i2c3_cfg_func>; + status = "disabled"; + }; + + i2c4: i2c@fdf0d000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xfdf0d000 0x0 0x1000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&crg_ctrl HI3670_CLK_GATE_I2C4>; + resets = <&crg_rst 0x78 27>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pmx_func &i2c4_cfg_func>; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi index 81d09434c5c6..a83b9d4f172e 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi @@ -113,7 +113,7 @@ #size-cells = <1>; ranges = <0x0 0x8a20000 0x1000>; - usb2_phy1: usb2-phy@120 { + usb2_phy1: usb2_phy@120 { compatible = "hisilicon,hi3798cv200-usb2-phy"; reg = <0x120 0x4>; clocks = <&crg HISTB_USB2_PHY1_REF_CLK>; @@ -134,7 +134,7 @@ }; }; - usb2_phy2: usb2-phy@124 { + usb2_phy2: usb2_phy@124 { compatible = "hisilicon,hi3798cv200-usb2-phy"; reg = <0x124 0x4>; clocks = <&crg HISTB_USB2_PHY2_REF_CLK>; @@ -565,8 +565,8 @@ device_type = "pci"; bus-range = <0x00 0xff>; num-lanes = <1>; - ranges = <0x81000000 0x0 0x00000000 0x4f00000 0x0 0x100000 - 0x82000000 0x0 0x3000000 0x3000000 0x0 0x01f00000>; + ranges = <0x81000000 0x0 0x00000000 0x4f00000 0x0 0x100000>, + <0x82000000 0x0 0x3000000 0x3000000 0x0 0x01f00000>; interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index c6580c9f068e..d426c6c8722b 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -872,7 +872,7 @@ thermal-zones { - cls0: cls0 { + cls0: cls0-thermal { polling-delay = <1000>; polling-delay-passive = <100>; sustainable-power = <3326>; @@ -881,13 +881,13 @@ thermal-sensors = <&tsensor 2>; trips { - threshold: trip-point@0 { + threshold: trip-point0 { temperature = <65000>; hysteresis = <0>; type = "passive"; }; - target: trip-point@1 { + target: trip-point1 { temperature = <75000>; hysteresis = <0>; type = "passive"; @@ -1053,7 +1053,7 @@ "ppmmu3"; clocks = <&media_ctrl HI6220_G3D_CLK>, <&media_ctrl HI6220_G3D_PCLK>; - clock-names = "core", "bus"; + clock-names = "bus", "core"; assigned-clocks = <&media_ctrl HI6220_G3D_CLK>, <&media_ctrl HI6220_G3D_PCLK>; assigned-clock-rates = <500000000>, <144000000>; diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi index d456b0aa6f58..77bd8c3a8314 100644 --- a/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi @@ -61,6 +61,153 @@ 0x060 MUX_M1 /* UART6_TXD */ >; }; + + i2c3_pmx_func: i2c3_pmx_func { + pinctrl-single,pins = < + 0x010 MUX_M1 /* I2C3_SCL */ + 0x014 MUX_M1 /* I2C3_SDA */ + >; + }; + + i2c4_pmx_func: i2c4_pmx_func { + pinctrl-single,pins = < + 0x03c MUX_M1 /* I2C4_SCL */ + 0x040 MUX_M1 /* I2C4_SDA */ + >; + }; + + cam0_rst_pmx_func: cam0_rst_pmx_func { + pinctrl-single,pins = < + 0x714 MUX_M0 /* CAM0_RST */ + >; + }; + + cam1_rst_pmx_func: cam1_rst_pmx_func { + pinctrl-single,pins = < + 0x048 MUX_M0 /* CAM1_RST */ + >; + }; + + cam0_pwd_n_pmx_func: cam0_pwd_n_pmx_func { + pinctrl-single,pins = < + 0x098 MUX_M0 /* CAM0_PWD_N */ + >; + }; + + cam1_pwd_n_pmx_func: cam1_pwd_n_pmx_func { + pinctrl-single,pins = < + 0x044 MUX_M0 /* CAM1_PWD_N */ + >; + }; + + isp0_pmx_func: isp0_pmx_func { + pinctrl-single,pins = < + 0x018 MUX_M1 /* ISP_CLK0 */ + 0x024 MUX_M1 /* ISP_SCL0 */ + 0x028 MUX_M1 /* ISP_SDA0 */ + >; + }; + + isp1_pmx_func: isp1_pmx_func { + pinctrl-single,pins = < + 0x01c MUX_M1 /* ISP_CLK1 */ + 0x02c MUX_M1 /* ISP_SCL1 */ + 0x030 MUX_M1 /* ISP_SDA1 */ + >; + }; + }; + + pmx1: pinmux@fff11000 { + compatible = "pinctrl-single"; + reg = <0x0 0xfff11000 0x0 0x73c>; + #gpio-range-cells = <0x3>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <0x20>; + pinctrl-single,function-mask = <0x7>; + /* pin base, nr pins & gpio function */ + pinctrl-single,gpio-range = <&range 0 46 0>; + + pwr_key_pmx_func: pwr_key_pmx_func { + pinctrl-single,pins = < + 0x064 MUX_M0 /* GPIO_203 */ + >; + }; + + pd_pmx_func: pd_pmx_func{ + pinctrl-single,pins = < + 0x080 MUX_M0 /* GPIO_221 */ + >; + }; + + i2s2_pmx_func: i2s2_pmx_func { + pinctrl-single,pins = < + 0x050 MUX_M1 /* I2S2_DI */ + 0x054 MUX_M1 /* I2S2_DO */ + 0x058 MUX_M1 /* I2S2_XCLK */ + 0x05c MUX_M1 /* I2S2_XFS */ + >; + }; + + spi0_pmx_func: spi0_pmx_func { + pinctrl-single,pins = < + 0x094 MUX_M1 /* SPI0_CLK */ + 0x098 MUX_M1 /* SPI0_DI */ + 0x09c MUX_M1 /* SPI0_DO */ + 0x0a0 MUX_M1 /* SPI0_CS0_N */ + >; + }; + + spi2_pmx_func: spi2_pmx_func { + pinctrl-single,pins = < + 0x710 MUX_M1 /* SPI2_CLK */ + 0x714 MUX_M1 /* SPI2_DI */ + 0x718 MUX_M1 /* SPI2_DO */ + 0x71c MUX_M1 /* SPI2_CS0_N */ + >; + }; + + spi3_pmx_func: spi3_pmx_func { + pinctrl-single,pins = < + 0x72c MUX_M1 /* SPI3_CLK */ + 0x730 MUX_M1 /* SPI3_DI */ + 0x734 MUX_M1 /* SPI3_DO */ + 0x738 MUX_M1 /* SPI3_CS0_N */ + >; + }; + + i2c0_pmx_func: i2c0_pmx_func { + pinctrl-single,pins = < + 0x020 MUX_M1 /* I2C0_SCL */ + 0x024 MUX_M1 /* I2C0_SDA */ + >; + }; + + i2c1_pmx_func: i2c1_pmx_func { + pinctrl-single,pins = < + 0x028 MUX_M1 /* I2C1_SCL */ + 0x02c MUX_M1 /* I2C1_SDA */ + >; + }; + i2c2_pmx_func: i2c2_pmx_func { + pinctrl-single,pins = < + 0x030 MUX_M1 /* I2C2_SCL */ + 0x034 MUX_M1 /* I2C2_SDA */ + >; + }; + + pcie_clkreq_pmx_func: pcie_clkreq_pmx_func { + pinctrl-single,pins = < + 0x084 MUX_M1 /* PCIE0_CLKREQ_N */ + >; + }; + + gpio185_pmx_func: gpio185_pmx_func { + pinctrl-single,pins = <0x01C 0x1>; + }; + + gpio185_pmx_idle: gpio185_pmx_idle { + pinctrl-single,pins = <0x01C 0x0>; + }; }; pmx2: pinmux@e896c800 { @@ -184,6 +331,180 @@ DRIVE7_02MA DRIVE6_MASK >; }; + + i2c3_cfg_func: i2c3_cfg_func { + pinctrl-single,pins = < + 0x014 0x0 /* I2C3_SCL */ + 0x018 0x0 /* I2C3_SDA */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + i2c4_cfg_func: i2c4_cfg_func { + pinctrl-single,pins = < + 0x040 0x0 /* I2C4_SCL */ + 0x044 0x0 /* I2C4_SDA */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + cam0_rst_cfg_func: cam0_rst_cfg_func { + pinctrl-single,pins = < + 0x714 0x0 /* CAM0_RST */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + cam1_rst_cfg_func: cam1_rst_cfg_func { + pinctrl-single,pins = < + 0x04C 0x0 /* CAM1_RST */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + cam0_pwd_n_cfg_func: cam0_pwd_n_cfg_func { + pinctrl-single,pins = < + 0x09C 0x0 /* CAM0_PWD_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + cam1_pwd_n_cfg_func: cam1_pwd_n_cfg_func { + pinctrl-single,pins = < + 0x048 0x0 /* CAM1_PWD_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + isp0_cfg_func: isp0_cfg_func { + pinctrl-single,pins = < + 0x01C 0x0 /* ISP_CLK0 */ + 0x028 0x0 /* ISP_SCL0 */ + 0x02C 0x0 /* ISP_SDA0 */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + isp1_cfg_func: isp1_cfg_func { + pinctrl-single,pins = < + 0x020 0x0 /* ISP_CLK1 */ + 0x030 0x0 /* ISP_SCL1 */ + 0x034 0x0 /* ISP_SDA1 */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; }; pmx5: pinmux@fc182000 { @@ -338,22 +659,311 @@ }; }; - pmx1: pinmux@fff11000 { - compatible = "pinctrl-single"; - reg = <0x0 0xfff11000 0x0 0x73c>; - #gpio-range-cells = <0x3>; - #pinctrl-cells = <1>; - pinctrl-single,register-width = <0x20>; - pinctrl-single,function-mask = <0x7>; - /* pin base, nr pins & gpio function */ - pinctrl-single,gpio-range = <&range 0 46 0>; - }; - pmx16: pinmux@fff11800 { compatible = "pinconf-single"; reg = <0x0 0xfff11800 0x0 0x73c>; #pinctrl-cells = <1>; pinctrl-single,register-width = <0x20>; + + pwr_key_cfg_func: pwr_key_cfg_func { + pinctrl-single,pins = < + 0x090 0x0 /* GPIO_203 */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + usb_cfg_func: usb_cfg_func { + pinctrl-single,pins = < + 0x0AC 0x0 /* GPIO_221 */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + spi0_cfg_func: spi0_cfg_func { + pinctrl-single,pins = < + 0x0c8 0x0 /* SPI0_DI */ + 0x0cc 0x0 /* SPI0_DO */ + 0x0d0 0x0 /* SPI0_CS0_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_06MA DRIVE6_MASK + >; + }; + + spi2_cfg_func: spi2_cfg_func { + pinctrl-single,pins = < + 0x714 0x0 /* SPI2_DI */ + 0x718 0x0 /* SPI2_DO */ + 0x71c 0x0 /* SPI2_CS0_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_06MA DRIVE6_MASK + >; + }; + + spi3_cfg_func: spi3_cfg_func { + pinctrl-single,pins = < + 0x730 0x0 /* SPI3_DI */ + 0x734 0x0 /* SPI3_DO */ + 0x738 0x0 /* SPI3_CS0_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_06MA DRIVE6_MASK + >; + }; + + spi0_clk_cfg_func: spi0_clk_cfg_func { + pinctrl-single,pins = < + 0x0c4 0x0 /* SPI0_CLK */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_10MA DRIVE6_MASK + >; + }; + + spi2_clk_cfg_func: spi2_clk_cfg_func { + pinctrl-single,pins = < + 0x710 0x0 /* SPI2_CLK */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_10MA DRIVE6_MASK + >; + }; + + spi3_clk_cfg_func: spi3_clk_cfg_func { + pinctrl-single,pins = < + 0x72c 0x0 /* SPI3_CLK */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_10MA DRIVE6_MASK + >; + }; + + i2c0_cfg_func: i2c0_cfg_func { + pinctrl-single,pins = < + 0x04c 0x0 /* I2C0_SCL */ + 0x050 0x0 /* I2C0_SDA */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + i2c1_cfg_func: i2c1_cfg_func { + pinctrl-single,pins = < + 0x054 0x0 /* I2C1_SCL */ + 0x058 0x0 /* I2C1_SDA */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + i2c2_cfg_func: i2c2_cfg_func { + pinctrl-single,pins = < + 0x05c 0x0 /* I2C2_SCL */ + 0x060 0x0 /* I2C2_SDA */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + pcie_clkreq_cfg_func: pcie_clkreq_cfg_func { + pinctrl-single,pins = < + 0x0b0 0x0 + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_06MA DRIVE6_MASK + >; + }; + i2s2_cfg_func: i2s2_cfg_func { + pinctrl-single,pins = < + 0x07c 0x0 /* I2S2_DI */ + 0x080 0x0 /* I2S2_DO */ + 0x084 0x0 /* I2S2_XCLK */ + 0x088 0x0 /* I2S2_XFS */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + gpio185_cfg_func: gpio185_cfg_func { + pinctrl-single,pins = <0x048 0>; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x00 0x70>; + pinctrl-single,slew-rate = <0x0 0x80>; + }; + + gpio185_cfg_idle: gpio185_cfg_idle { + pinctrl-single,pins = <0x048 0>; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x00 0x70>; + pinctrl-single,slew-rate = <0x0 0x80>; + }; }; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi index 405acaa3e9dd..4aed8d440b3a 100644 --- a/arch/arm64/boot/dts/hisilicon/hip05.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi @@ -318,7 +318,7 @@ status = "disabled"; }; - lbc: localbus@80380000 { + lbc: local-bus@80380000 { compatible = "hisilicon,hisi-localbus", "simple-bus"; reg = <0x0 0x80380000 0x0 0x10000>; status = "disabled"; diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi b/arch/arm64/boot/dts/hisilicon/hip06.dtsi index 7980709e21ff..7deca5f763d5 100644 --- a/arch/arm64/boot/dts/hisilicon/hip06.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi @@ -335,7 +335,6 @@ reg = <0x0 0xa0040000 0x0 0x20000>; #iommu-cells = <1>; dma-coherent; - smmu-cb-memtype = <0x0 0x1>; hisilicon,broken-prefetch-cmd; status = "disabled"; }; @@ -737,9 +736,8 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - ranges = <0x02000000 0 0xb2000000 0x0 0xb2000000 0 - 0x5ff0000 0x01000000 0 0 0 0xb7ff0000 - 0 0x10000>; + ranges = <0x02000000 0 0xb2000000 0x0 0xb2000000 0 0x5ff0000>, + <0x01000000 0 0 0 0xb7ff0000 0 0x10000>; #interrupt-cells = <1>; interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = <0x0 0 0 1 &mbigen_pcie0 650 4 diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi index 7832d9cdec21..2172d8071181 100644 --- a/arch/arm64/boot/dts/hisilicon/hip07.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi @@ -1166,7 +1166,6 @@ reg = <0x0 0xa0040000 0x0 0x20000>; #iommu-cells = <1>; dma-coherent; - smmu-cb-memtype = <0x0 0x1>; hisilicon,broken-prefetch-cmd; status = "disabled"; }; @@ -1181,7 +1180,6 @@ #iommu-cells = <1>; dma-coherent; hisilicon,broken-prefetch-cmd; - /* smmu-cb-memtype = <0x0 0x1>;*/ }; p0_smmu_alg_b: iommu@8d0040000 { compatible = "arm,smmu-v3"; @@ -1194,7 +1192,6 @@ #iommu-cells = <1>; dma-coherent; hisilicon,broken-prefetch-cmd; - /* smmu-cb-memtype = <0x0 0x1>;*/ }; p1_smmu_alg_a: iommu@400d0040000 { compatible = "arm,smmu-v3"; @@ -1207,7 +1204,6 @@ #iommu-cells = <1>; dma-coherent; hisilicon,broken-prefetch-cmd; - /* smmu-cb-memtype = <0x0 0x1>;*/ }; p1_smmu_alg_b: iommu@408d0040000 { compatible = "arm,smmu-v3"; @@ -1220,7 +1216,6 @@ #iommu-cells = <1>; dma-coherent; hisilicon,broken-prefetch-cmd; - /* smmu-cb-memtype = <0x0 0x1>;*/ }; soc { @@ -1708,8 +1703,8 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - ranges = <0x02000000 0 0xa8000000 0 0xa8000000 0 0x77f0000 - 0x01000000 0 0 0 0xaf7f0000 0 0x10000>; + ranges = <0x02000000 0 0xa8000000 0 0xa8000000 0 0x77f0000>, + <0x01000000 0 0 0 0xaf7f0000 0 0x10000>; #interrupt-cells = <1>; interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = <0x0 0 0 1 &mbigen_pcie2_a 671 4 diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile index 296eceec4276..3a052540605b 100644 --- a/arch/arm64/boot/dts/intel/Makefile +++ b/arch/arm64/boot/dts/intel/Makefile @@ -2,3 +2,4 @@ dtb-$(CONFIG_ARCH_AGILEX) += socfpga_agilex_socdk.dtb \ socfpga_agilex_socdk_nand.dtb dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb +dtb-$(CONFIG_ARCH_N5X) += socfpga_n5x_socdk.dtb diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi index e1c0fcba5c20..07c099b4ed5b 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi +++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi @@ -166,7 +166,7 @@ rx-fifo-depth = <16384>; snps,multicast-filter-bins = <256>; iommus = <&smmu 2>; - altr,sysmgr-syscon = <&sysmgr 0x48 8>; + altr,sysmgr-syscon = <&sysmgr 0x48 0>; clocks = <&clkmgr AGILEX_EMAC1_CLK>, <&clkmgr AGILEX_EMAC_PTP_CLK>; clock-names = "stmmaceth", "ptp_ref"; status = "disabled"; @@ -184,7 +184,7 @@ rx-fifo-depth = <16384>; snps,multicast-filter-bins = <256>; iommus = <&smmu 3>; - altr,sysmgr-syscon = <&sysmgr 0x4c 16>; + altr,sysmgr-syscon = <&sysmgr 0x4c 0>; clocks = <&clkmgr AGILEX_EMAC2_CLK>, <&clkmgr AGILEX_EMAC_PTP_CLK>; clock-names = "stmmaceth", "ptp_ref"; status = "disabled"; diff --git a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts new file mode 100644 index 000000000000..5f56e2697fee --- /dev/null +++ b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021, Intel Corporation + */ +#include "socfpga_agilex.dtsi" + +/ { + model = "eASIC N5X SoCDK"; + + aliases { + serial0 = &uart0; + ethernet0 = &gmac0; + ethernet1 = &gmac1; + ethernet2 = &gmac2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0 0 0>; + }; + + soc { + clocks { + osc1 { + clock-frequency = <25000000>; + }; + }; + }; +}; + +&clkmgr { + compatible = "intel,easic-n5x-clkmgr"; +}; + +&mmc { + status = "okay"; + cap-sd-highspeed; + broken-cd; + bus-width = <4>; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi index daffe136c523..5fc613d24151 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi @@ -67,8 +67,6 @@ /* J6 */ &sata { status = "okay"; - phys = <&comphy2 0>; - phy-names = "sata-phy"; }; /* U11 */ diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts index f5ec3b644769..d239ab70ed99 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -205,7 +205,7 @@ }; partition@20000 { - label = "u-boot"; + label = "a53-firmware"; reg = <0x20000 0x160000>; }; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index d5b6c0a1c54a..7a2df148c6a3 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -458,6 +458,8 @@ reg = <0xe0000 0x178>; interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; clocks = <&nb_periph_clk 1>; + phys = <&comphy2 0>; + phy-names = "sata-phy"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-ap807.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi index 623010f3ca89..d9bbbfa4b4eb 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap807.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi @@ -27,3 +27,8 @@ #clock-cells = <1>; }; }; + +&ap_sdhci0 { + compatible = "marvell,armada-ap807-sdhci"; +}; + diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi index 12e477f1aeb9..6614472100c2 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi @@ -281,6 +281,9 @@ gpio-controller; #gpio-cells = <2>; gpio-ranges = <&ap_pinctrl 0 0 20>; + marvell,pwm-offset = <0x10c0>; + #pwm-cells = <2>; + clocks = <&ap_clk 3>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi index 994a2fce449a..64179a372ecf 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi @@ -59,7 +59,7 @@ CP11X_LABEL(ethernet): ethernet@0 { compatible = "marvell,armada-7k-pp22"; - reg = <0x0 0x100000>, <0x129000 0xb000>; + reg = <0x0 0x100000>, <0x129000 0xb000>, <0x220000 0x800>; clocks = <&CP11X_LABEL(clk) 1 3>, <&CP11X_LABEL(clk) 1 9>, <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>; @@ -234,12 +234,17 @@ gpio-controller; #gpio-cells = <2>; gpio-ranges = <&CP11X_LABEL(pinctrl) 0 0 32>; + marvell,pwm-offset = <0x1f0>; + #pwm-cells = <2>; interrupt-controller; interrupts = <86 IRQ_TYPE_LEVEL_HIGH>, <85 IRQ_TYPE_LEVEL_HIGH>, <84 IRQ_TYPE_LEVEL_HIGH>, <83 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; + clock-names = "core", "axi"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; status = "disabled"; }; @@ -250,12 +255,17 @@ gpio-controller; #gpio-cells = <2>; gpio-ranges = <&CP11X_LABEL(pinctrl) 0 32 31>; + marvell,pwm-offset = <0x1f0>; + #pwm-cells = <2>; interrupt-controller; interrupts = <82 IRQ_TYPE_LEVEL_HIGH>, <81 IRQ_TYPE_LEVEL_HIGH>, <80 IRQ_TYPE_LEVEL_HIGH>, <79 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; + clock-names = "core", "axi"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dts b/arch/arm64/boot/dts/marvell/cn9130-db.dts index ce49a70d88a0..79020e6d2792 100644 --- a/arch/arm64/boot/dts/marvell/cn9130-db.dts +++ b/arch/arm64/boot/dts/marvell/cn9130-db.dts @@ -113,6 +113,8 @@ &ap_sdhci0 { pinctrl-names = "default"; bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; vqmmc-supply = <&ap0_reg_sd_vccq>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index 18f7b46c4095..deba27ab7657 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -13,6 +13,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt6779.dtsi b/arch/arm64/boot/dts/mediatek/mt6779.dtsi index 370f309d32de..9bdf5145966c 100644 --- a/arch/arm64/boot/dts/mediatek/mt6779.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt6779.dtsi @@ -189,6 +189,23 @@ #clock-cells = <1>; }; + pwrap: pwrap@1000d000 { + compatible = "mediatek,mt6779-pwrap"; + reg = <0 0x1000d000 0 0x1000>; + reg-names = "pwrap"; + interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_PMIC_AP>; + clock-names = "spi", "wrap"; + }; + + devapc: devapc@10207000 { + compatible = "mediatek,mt6779-devapc"; + reg = <0 0x10207000 0 0x1000>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg_ao CLK_INFRA_DEVICE_APC>; + clock-names = "devapc-infra-clock"; + }; + uart0: serial@11002000 { compatible = "mediatek,mt6779-uart", "mediatek,mt6577-uart"; diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi index 5b9ec032ce8d..7c6d871538a6 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -698,6 +698,8 @@ clocks = <&pericfg CLK_PERI_MSDC30_1_PD>, <&topckgen CLK_TOP_AXI_SEL>; clock-names = "source", "hclk"; + resets = <&pericfg MT7622_PERI_MSDC1_SW_RST>; + reset-names = "hrst"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts index cba2d8933e79..3249c959f76f 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts @@ -344,6 +344,12 @@ bias-disable; }; }; + + pwm_pins_1: pwm1 { + pins_pwm { + pinmux = <PINMUX_GPIO90__FUNC_PWM_A>; + }; + }; }; &spi0 { @@ -392,3 +398,9 @@ &uart0 { status = "okay"; }; + +&pwm1 { + status = "okay"; + pinctrl-0 = <&pwm_pins_1>; + pinctrl-names = "default"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts new file mode 100644 index 000000000000..fb5ee91b6fe0 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2019 Google LLC + * + * Device-tree for Krane sku0. + * + * SKU is a 8-bit value (0x00 == 0): + * - Bits 7..4: Panel ID: 0x0 (AUO) + * - Bits 3..0: SKU ID: 0x0 (default) + */ + +/dts-v1/; +#include "mt8183-kukui-krane.dtsi" + +/ { + model = "MediaTek krane sku0 board"; + compatible = "google,krane-sku0", "google,krane", "mediatek,mt8183"; +}; + +&panel { + status = "okay"; + compatible = "auo,kd101n80-45na"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts index 47113e275cb5..721d16f9c3b4 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts @@ -16,3 +16,8 @@ model = "MediaTek krane sku176 board"; compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183"; }; + +&panel { + status = "okay"; + compatible = "boe,tv101wum-nl6"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi index bf2ad1294dd3..ff56bcfa3370 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi @@ -249,6 +249,36 @@ proc-supply = <&mt6358_vproc11_reg>; }; +&dsi0 { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + panel: panel@0 { + /* compatible will be set in board dts */ + reg = <0>; + enable-gpios = <&pio 45 0>; + pinctrl-names = "default"; + pinctrl-0 = <&panel_pins_default>; + avdd-supply = <&ppvarn_lcd>; + avee-supply = <&ppvarp_lcd>; + pp1800-supply = <&pp1800_lcd>; + backlight = <&backlight_lcd0>; + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; + + ports { + port { + dsi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; @@ -290,6 +320,10 @@ clock-frequency = <100000>; }; +&mipi_tx0 { + status = "okay"; +}; + &mmc0 { status = "okay"; pinctrl-names = "default", "state_uhs"; @@ -547,6 +581,14 @@ }; }; + panel_pins_default: panel_pins_default { + panel_reset { + pinmux = <PINMUX_GPIO45__FUNC_GPIO45>; + output-low; + bias-pull-up; + }; + }; + pwm0_pin_default: pwm0_pin_default { pins1 { pinmux = <PINMUX_GPIO176__FUNC_GPIO176>; @@ -709,6 +751,10 @@ }; }; +&mfg { + domain-supply = <&mt6358_vgpu_reg>; +}; + &soc_data { status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 5b782a4769e7..80519a145f13 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -6,7 +6,7 @@ */ #include <dt-bindings/clock/mt8183-clk.h> -#include <dt-bindings/gce/mt8173-gce.h> +#include <dt-bindings/gce/mt8183-gce.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/memory/mt8183-larb-port.h> @@ -360,7 +360,7 @@ #size-cells = <0>; #power-domain-cells = <1>; - power-domain@MT8183_POWER_DOMAIN_MFG { + mfg: power-domain@MT8183_POWER_DOMAIN_MFG { reg = <MT8183_POWER_DOMAIN_MFG>; #address-cells = <1>; #size-cells = <0>; @@ -661,12 +661,27 @@ compatible = "mediatek,mt8183-disp-pwm"; reg = <0 0x1100e000 0 0x1000>; interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; #pwm-cells = <2>; clocks = <&topckgen CLK_TOP_MUX_DISP_PWM>, <&infracfg CLK_INFRA_DISP_PWM>; clock-names = "main", "mm"; }; + pwm1: pwm@11006000 { + compatible = "mediatek,mt8183-pwm"; + reg = <0 0x11006000 0 0x1000>; + #pwm-cells = <2>; + clocks = <&infracfg CLK_INFRA_PWM>, + <&infracfg CLK_INFRA_PWM_HCLK>, + <&infracfg CLK_INFRA_PWM1>, + <&infracfg CLK_INFRA_PWM2>, + <&infracfg CLK_INFRA_PWM3>, + <&infracfg CLK_INFRA_PWM4>; + clock-names = "top", "main", "pwm1", "pwm2", "pwm3", + "pwm4"; + }; + i2c3: i2c@1100f000 { compatible = "mediatek,mt8183-i2c"; reg = <0 0x1100f000 0 0x1000>, @@ -1011,7 +1026,7 @@ clocks = <&mmsys CLK_MM_DISP_RDMA0>; iommus = <&iommu M4U_PORT_DISP_RDMA0>; mediatek,larb = <&larb0>; - mediatek,rdma_fifo_size = <5120>; + mediatek,rdma-fifo-size = <5120>; mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>; }; @@ -1023,7 +1038,7 @@ clocks = <&mmsys CLK_MM_DISP_RDMA1>; iommus = <&iommu M4U_PORT_DISP_RDMA1>; mediatek,larb = <&larb0>; - mediatek,rdma_fifo_size = <2048>; + mediatek,rdma-fifo-size = <2048>; mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>; }; @@ -1055,8 +1070,7 @@ }; gamma0: gamma@14011000 { - compatible = "mediatek,mt8183-disp-gamma", - "mediatek,mt8173-disp-gamma"; + compatible = "mediatek,mt8183-disp-gamma"; reg = <0 0x14011000 0 0x1000>; interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_LOW>; power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi index e12e024de122..9757138a8bbd 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi @@ -39,6 +39,7 @@ reg = <0x000>; enable-method = "psci"; clock-frequency = <1701000000>; + cpu-idle-states = <&cpuoff_l &clusteroff_l>; next-level-cache = <&l2_0>; capacity-dmips-mhz = <530>; }; @@ -49,6 +50,7 @@ reg = <0x100>; enable-method = "psci"; clock-frequency = <1701000000>; + cpu-idle-states = <&cpuoff_l &clusteroff_l>; next-level-cache = <&l2_0>; capacity-dmips-mhz = <530>; }; @@ -59,6 +61,7 @@ reg = <0x200>; enable-method = "psci"; clock-frequency = <1701000000>; + cpu-idle-states = <&cpuoff_l &clusteroff_l>; next-level-cache = <&l2_0>; capacity-dmips-mhz = <530>; }; @@ -69,6 +72,7 @@ reg = <0x300>; enable-method = "psci"; clock-frequency = <1701000000>; + cpu-idle-states = <&cpuoff_l &clusteroff_l>; next-level-cache = <&l2_0>; capacity-dmips-mhz = <530>; }; @@ -79,6 +83,7 @@ reg = <0x400>; enable-method = "psci"; clock-frequency = <2171000000>; + cpu-idle-states = <&cpuoff_b &clusteroff_b>; next-level-cache = <&l2_1>; capacity-dmips-mhz = <1024>; }; @@ -89,6 +94,7 @@ reg = <0x500>; enable-method = "psci"; clock-frequency = <2171000000>; + cpu-idle-states = <&cpuoff_b &clusteroff_b>; next-level-cache = <&l2_1>; capacity-dmips-mhz = <1024>; }; @@ -99,6 +105,7 @@ reg = <0x600>; enable-method = "psci"; clock-frequency = <2171000000>; + cpu-idle-states = <&cpuoff_b &clusteroff_b>; next-level-cache = <&l2_1>; capacity-dmips-mhz = <1024>; }; @@ -109,6 +116,7 @@ reg = <0x700>; enable-method = "psci"; clock-frequency = <2171000000>; + cpu-idle-states = <&cpuoff_b &clusteroff_b>; next-level-cache = <&l2_1>; capacity-dmips-mhz = <1024>; }; @@ -158,6 +166,42 @@ l3_0: l3-cache { compatible = "cache"; }; + + idle-states { + entry-method = "arm,psci"; + cpuoff_l: cpuoff_l { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x00010001>; + local-timer-stop; + entry-latency-us = <55>; + exit-latency-us = <140>; + min-residency-us = <780>; + }; + cpuoff_b: cpuoff_b { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x00010001>; + local-timer-stop; + entry-latency-us = <35>; + exit-latency-us = <145>; + min-residency-us = <720>; + }; + clusteroff_l: clusteroff_l { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x01010002>; + local-timer-stop; + entry-latency-us = <60>; + exit-latency-us = <155>; + min-residency-us = <860>; + }; + clusteroff_b: clusteroff_b { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x01010002>; + local-timer-stop; + entry-latency-us = <40>; + exit-latency-us = <155>; + min-residency-us = <780>; + }; + }; }; pmu-a55 { @@ -379,6 +423,19 @@ status = "disabled"; }; + nor_flash: spi@11234000 { + compatible = "mediatek,mt8192-nor"; + reg = <0 0x11234000 0 0xe0>; + interrupts = <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, + <&clk26m>, + <&clk26m>; + clock-names = "spi", "sf", "axi"; + #address-cells = <1>; + #size-cells = <0>; + status = "disable"; + }; + i2c3: i2c3@11cb0000 { compatible = "mediatek,mt8192-i2c"; reg = <0 0x11cb0000 0 0x1000>, diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi index e6e4d9d60094..b80e95574bef 100644 --- a/arch/arm64/boot/dts/mediatek/mt8516.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi @@ -276,6 +276,27 @@ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + apdma: dma-controller@11000480 { + compatible = "mediatek,mt8516-uart-dma", + "mediatek,mt6577-uart-dma"; + reg = <0 0x11000480 0 0x80>, + <0 0x11000500 0 0x80>, + <0 0x11000580 0 0x80>, + <0 0x11000600 0 0x80>, + <0 0x11000980 0 0x80>, + <0 0x11000a00 0 0x80>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_LOW>; + dma-requests = <6>; + clocks = <&topckgen CLK_TOP_APDMA>; + clock-names = "apdma"; + #dma-cells = <1>; + }; + uart0: serial@11005000 { compatible = "mediatek,mt8516-uart", "mediatek,mt6577-uart"; @@ -284,6 +305,9 @@ clocks = <&topckgen CLK_TOP_UART0_SEL>, <&topckgen CLK_TOP_UART0>; clock-names = "baud", "bus"; + dmas = <&apdma 0 + &apdma 1>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -295,6 +319,9 @@ clocks = <&topckgen CLK_TOP_UART1_SEL>, <&topckgen CLK_TOP_UART1>; clock-names = "baud", "bus"; + dmas = <&apdma 2 + &apdma 3>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -306,6 +333,9 @@ clocks = <&topckgen CLK_TOP_UART2_SEL>, <&topckgen CLK_TOP_UART2>; clock-names = "baud", "bus"; + dmas = <&apdma 4 + &apdma 5>; + dma-names = "tx", "rx"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile index 9296d12d11e9..e13fb1070472 100644 --- a/arch/arm64/boot/dts/nvidia/Makefile +++ b/arch/arm64/boot/dts/nvidia/Makefile @@ -9,4 +9,5 @@ dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2894-0050-a08.dtb dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p2972-0000.dtb dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0000.dtb +dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0001.dtb dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-sim-vdk.dtb diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index 6fd2e0542c27..9f5f5e1fa82e 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -10,6 +10,725 @@ model = "NVIDIA Jetson TX2 Developer Kit"; compatible = "nvidia,p2771-0000", "nvidia,tegra186"; + aconnect { + status = "okay"; + + dma-controller@2930000 { + status = "okay"; + }; + + interrupt-controller@2a40000 { + status = "okay"; + }; + + ahub@2900800 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + xbar_admaif0_ep: endpoint { + remote-endpoint = <&admaif0_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + xbar_admaif1_ep: endpoint { + remote-endpoint = <&admaif1_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + xbar_admaif2_ep: endpoint { + remote-endpoint = <&admaif2_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + xbar_admaif3_ep: endpoint { + remote-endpoint = <&admaif3_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + xbar_admaif4_ep: endpoint { + remote-endpoint = <&admaif4_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + xbar_admaif5_ep: endpoint { + remote-endpoint = <&admaif5_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + xbar_admaif6_ep: endpoint { + remote-endpoint = <&admaif6_ep>; + }; + }; + + port@7 { + reg = <0x7>; + + xbar_admaif7_ep: endpoint { + remote-endpoint = <&admaif7_ep>; + }; + }; + + port@8 { + reg = <0x8>; + + xbar_admaif8_ep: endpoint { + remote-endpoint = <&admaif8_ep>; + }; + }; + + port@9 { + reg = <0x9>; + + xbar_admaif9_ep: endpoint { + remote-endpoint = <&admaif9_ep>; + }; + }; + + port@a { + reg = <0xa>; + + xbar_admaif10_ep: endpoint { + remote-endpoint = <&admaif10_ep>; + }; + }; + + port@b { + reg = <0xb>; + + xbar_admaif11_ep: endpoint { + remote-endpoint = <&admaif11_ep>; + }; + }; + + port@c { + reg = <0xc>; + + xbar_admaif12_ep: endpoint { + remote-endpoint = <&admaif12_ep>; + }; + }; + + port@d { + reg = <0xd>; + + xbar_admaif13_ep: endpoint { + remote-endpoint = <&admaif13_ep>; + }; + }; + + port@e { + reg = <0xe>; + + xbar_admaif14_ep: endpoint { + remote-endpoint = <&admaif14_ep>; + }; + }; + + port@f { + reg = <0xf>; + + xbar_admaif15_ep: endpoint { + remote-endpoint = <&admaif15_ep>; + }; + }; + + port@10 { + reg = <0x10>; + + xbar_admaif16_ep: endpoint { + remote-endpoint = <&admaif16_ep>; + }; + }; + + port@11 { + reg = <0x11>; + + xbar_admaif17_ep: endpoint { + remote-endpoint = <&admaif17_ep>; + }; + }; + + port@12 { + reg = <0x12>; + + xbar_admaif18_ep: endpoint { + remote-endpoint = <&admaif18_ep>; + }; + }; + + port@13 { + reg = <0x13>; + + xbar_admaif19_ep: endpoint { + remote-endpoint = <&admaif19_ep>; + }; + }; + + xbar_i2s1_port: port@14 { + reg = <0x14>; + + xbar_i2s1_ep: endpoint { + remote-endpoint = <&i2s1_cif_ep>; + }; + }; + + xbar_i2s2_port: port@15 { + reg = <0x15>; + + xbar_i2s2_ep: endpoint { + remote-endpoint = <&i2s2_cif_ep>; + }; + }; + + xbar_i2s3_port: port@16 { + reg = <0x16>; + + xbar_i2s3_ep: endpoint { + remote-endpoint = <&i2s3_cif_ep>; + }; + }; + + xbar_i2s4_port: port@17 { + reg = <0x17>; + + xbar_i2s4_ep: endpoint { + remote-endpoint = <&i2s4_cif_ep>; + }; + }; + + xbar_i2s5_port: port@18 { + reg = <0x18>; + + xbar_i2s5_ep: endpoint { + remote-endpoint = <&i2s5_cif_ep>; + }; + }; + + xbar_i2s6_port: port@19 { + reg = <0x19>; + + xbar_i2s6_ep: endpoint { + remote-endpoint = <&i2s6_cif_ep>; + }; + }; + + xbar_dmic1_port: port@1a { + reg = <0x1a>; + + xbar_dmic1_ep: endpoint { + remote-endpoint = <&dmic1_cif_ep>; + }; + }; + + xbar_dmic2_port: port@1b { + reg = <0x1b>; + + xbar_dmic2_ep: endpoint { + remote-endpoint = <&dmic2_cif_ep>; + }; + }; + + xbar_dmic3_port: port@1c { + reg = <0x1c>; + + xbar_dmic3_ep: endpoint { + remote-endpoint = <&dmic3_cif_ep>; + }; + }; + + xbar_dspk1_port: port@1e { + reg = <0x1e>; + + xbar_dspk1_ep: endpoint { + remote-endpoint = <&dspk1_cif_ep>; + }; + }; + + xbar_dspk2_port: port@1f { + reg = <0x1f>; + + xbar_dspk2_ep: endpoint { + remote-endpoint = <&dspk2_cif_ep>; + }; + }; + }; + + admaif@290f000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + admaif0_port: port@0 { + reg = <0x0>; + + admaif0_ep: endpoint { + remote-endpoint = <&xbar_admaif0_ep>; + }; + }; + + admaif1_port: port@1 { + reg = <0x1>; + + admaif1_ep: endpoint { + remote-endpoint = <&xbar_admaif1_ep>; + }; + }; + + admaif2_port: port@2 { + reg = <0x2>; + + admaif2_ep: endpoint { + remote-endpoint = <&xbar_admaif2_ep>; + }; + }; + + admaif3_port: port@3 { + reg = <0x3>; + + admaif3_ep: endpoint { + remote-endpoint = <&xbar_admaif3_ep>; + }; + }; + + admaif4_port: port@4 { + reg = <0x4>; + + admaif4_ep: endpoint { + remote-endpoint = <&xbar_admaif4_ep>; + }; + }; + + admaif5_port: port@5 { + reg = <0x5>; + + admaif5_ep: endpoint { + remote-endpoint = <&xbar_admaif5_ep>; + }; + }; + + admaif6_port: port@6 { + reg = <0x6>; + + admaif6_ep: endpoint { + remote-endpoint = <&xbar_admaif6_ep>; + }; + }; + + admaif7_port: port@7 { + reg = <0x7>; + + admaif7_ep: endpoint { + remote-endpoint = <&xbar_admaif7_ep>; + }; + }; + + admaif8_port: port@8 { + reg = <0x8>; + + admaif8_ep: endpoint { + remote-endpoint = <&xbar_admaif8_ep>; + }; + }; + + admaif9_port: port@9 { + reg = <0x9>; + + admaif9_ep: endpoint { + remote-endpoint = <&xbar_admaif9_ep>; + }; + }; + + admaif10_port: port@a { + reg = <0xa>; + + admaif10_ep: endpoint { + remote-endpoint = <&xbar_admaif10_ep>; + }; + }; + + admaif11_port: port@b { + reg = <0xb>; + + admaif11_ep: endpoint { + remote-endpoint = <&xbar_admaif11_ep>; + }; + }; + + admaif12_port: port@c { + reg = <0xc>; + + admaif12_ep: endpoint { + remote-endpoint = <&xbar_admaif12_ep>; + }; + }; + + admaif13_port: port@d { + reg = <0xd>; + + admaif13_ep: endpoint { + remote-endpoint = <&xbar_admaif13_ep>; + }; + }; + + admaif14_port: port@e { + reg = <0xe>; + + admaif14_ep: endpoint { + remote-endpoint = <&xbar_admaif14_ep>; + }; + }; + + admaif15_port: port@f { + reg = <0xf>; + + admaif15_ep: endpoint { + remote-endpoint = <&xbar_admaif15_ep>; + }; + }; + + admaif16_port: port@10 { + reg = <0x10>; + + admaif16_ep: endpoint { + remote-endpoint = <&xbar_admaif16_ep>; + }; + }; + + admaif17_port: port@11 { + reg = <0x11>; + + admaif17_ep: endpoint { + remote-endpoint = <&xbar_admaif17_ep>; + }; + }; + + admaif18_port: port@12 { + reg = <0x12>; + + admaif18_ep: endpoint { + remote-endpoint = <&xbar_admaif18_ep>; + }; + }; + + admaif19_port: port@13 { + reg = <0x13>; + + admaif19_ep: endpoint { + remote-endpoint = <&xbar_admaif19_ep>; + }; + }; + }; + }; + + i2s@2901000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s1_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s1_ep>; + }; + }; + + i2s1_port: port@1 { + reg = <1>; + + i2s1_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + i2s@2901100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s2_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s2_ep>; + }; + }; + + i2s2_port: port@1 { + reg = <1>; + + i2s2_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + i2s@2901200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s3_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s3_ep>; + }; + }; + + i2s3_port: port@1 { + reg = <1>; + + i2s3_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + i2s@2901300 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s4_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s4_ep>; + }; + }; + + i2s4_port: port@1 { + reg = <1>; + + i2s4_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + i2s@2901400 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s5_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s5_ep>; + }; + }; + + i2s5_port: port@1 { + reg = <1>; + + i2s5_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + i2s@2901500 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s6_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s6_ep>; + }; + }; + + i2s6_port: port@1 { + reg = <1>; + + i2s6_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + dmic@2904000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic1_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic1_ep>; + }; + }; + + dmic1_port: port@1 { + reg = <1>; + + dmic1_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + + dmic@2904100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic2_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic2_ep>; + }; + }; + + dmic2_port: port@1 { + reg = <1>; + + dmic2_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + + dmic@2904200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic3_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic3_ep>; + }; + }; + + dmic3_port: port@1 { + reg = <1>; + + dmic3_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + + dspk@2905000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dspk1_cif_ep: endpoint { + remote-endpoint = <&xbar_dspk1_ep>; + }; + }; + + dspk1_port: port@1 { + reg = <1>; + + dspk1_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + + dspk@2905100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dspk2_cif_ep: endpoint { + remote-endpoint = <&xbar_dspk2_ep>; + }; + }; + + dspk2_port: port@1 { + reg = <1>; + + dspk2_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + }; + }; + i2c@3160000 { power-monitor@42 { compatible = "ti,ina3221"; @@ -369,4 +1088,27 @@ vin-supply = <&vdd_5v0_sys>; }; + + sound { + compatible = "nvidia,tegra186-audio-graph-card"; + status = "okay"; + + dais = /* FE */ + <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>, + <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>, + <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>, + <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>, + <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>, + /* Router */ + <&xbar_i2s1_port>, <&xbar_i2s2_port>, <&xbar_i2s3_port>, + <&xbar_i2s4_port>, <&xbar_i2s5_port>, <&xbar_i2s6_port>, + <&xbar_dmic1_port>, <&xbar_dmic2_port>, <&xbar_dmic3_port>, + <&xbar_dspk1_port>, <&xbar_dspk2_port>, + /* I/O */ + <&i2s1_port>, <&i2s2_port>, <&i2s3_port>, <&i2s4_port>, + <&i2s5_port>, <&i2s6_port>, <&dmic1_port>, <&dmic2_port>, + <&dmic3_port>, <&dspk1_port>, <&dspk2_port>; + + label = "jetson-tx2-ape"; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 58c51965df47..02b26b39cedc 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -1678,6 +1678,28 @@ interrupt-affinity = <&ca57_0 &ca57_1 &ca57_2 &ca57_3>; }; + sound { + status = "disabled"; + + clocks = <&bpmp TEGRA186_CLK_PLLA>, + <&bpmp TEGRA186_CLK_PLL_A_OUT0>; + clock-names = "pll_a", "plla_out0"; + assigned-clocks = <&bpmp TEGRA186_CLK_PLLA>, + <&bpmp TEGRA186_CLK_PLL_A_OUT0>, + <&bpmp TEGRA186_CLK_AUD_MCLK>; + assigned-clock-parents = <0>, + <&bpmp TEGRA186_CLK_PLLA>, + <&bpmp TEGRA186_CLK_PLL_A_OUT0>; + /* + * PLLA supports dynamic ramp. Below initial rate is chosen + * for this to work and oscillate between base rates required + * for 8x and 11.025x sample rate streams. + */ + assigned-clock-rates = <258000000>; + + iommus = <&smmu TEGRA186_SID_APE>; + }; + thermal-zones { a57 { polling-delay = <0>; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi index d71b7a1140fe..7e7b0eb90c80 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi @@ -93,6 +93,10 @@ vclamp-usb-supply = <&vdd_1v8ao>; ports { + usb2-0 { + vbus-supply = <&vdd_5v0_sys>; + }; + usb2-1 { vbus-supply = <&vdd_5v0_sys>; }; @@ -105,6 +109,10 @@ vbus-supply = <&vdd_5v0_sys>; }; + usb3-2 { + vbus-supply = <&vdd_5v0_sys>; + }; + usb3-3 { vbus-supply = <&vdd_5v0_sys>; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts index 54d057beec59..2888efc42ba1 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts @@ -21,6 +21,513 @@ interrupt-controller@2a40000 { status = "okay"; }; + + ahub@2900800 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + xbar_admaif0_ep: endpoint { + remote-endpoint = <&admaif0_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + xbar_admaif1_ep: endpoint { + remote-endpoint = <&admaif1_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + xbar_admaif2_ep: endpoint { + remote-endpoint = <&admaif2_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + xbar_admaif3_ep: endpoint { + remote-endpoint = <&admaif3_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + xbar_admaif4_ep: endpoint { + remote-endpoint = <&admaif4_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + xbar_admaif5_ep: endpoint { + remote-endpoint = <&admaif5_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + xbar_admaif6_ep: endpoint { + remote-endpoint = <&admaif6_ep>; + }; + }; + + port@7 { + reg = <0x7>; + + xbar_admaif7_ep: endpoint { + remote-endpoint = <&admaif7_ep>; + }; + }; + + port@8 { + reg = <0x8>; + + xbar_admaif8_ep: endpoint { + remote-endpoint = <&admaif8_ep>; + }; + }; + + port@9 { + reg = <0x9>; + + xbar_admaif9_ep: endpoint { + remote-endpoint = <&admaif9_ep>; + }; + }; + + port@a { + reg = <0xa>; + + xbar_admaif10_ep: endpoint { + remote-endpoint = <&admaif10_ep>; + }; + }; + + port@b { + reg = <0xb>; + + xbar_admaif11_ep: endpoint { + remote-endpoint = <&admaif11_ep>; + }; + }; + + port@c { + reg = <0xc>; + + xbar_admaif12_ep: endpoint { + remote-endpoint = <&admaif12_ep>; + }; + }; + + port@d { + reg = <0xd>; + + xbar_admaif13_ep: endpoint { + remote-endpoint = <&admaif13_ep>; + }; + }; + + port@e { + reg = <0xe>; + + xbar_admaif14_ep: endpoint { + remote-endpoint = <&admaif14_ep>; + }; + }; + + port@f { + reg = <0xf>; + + xbar_admaif15_ep: endpoint { + remote-endpoint = <&admaif15_ep>; + }; + }; + + port@10 { + reg = <0x10>; + + xbar_admaif16_ep: endpoint { + remote-endpoint = <&admaif16_ep>; + }; + }; + + port@11 { + reg = <0x11>; + + xbar_admaif17_ep: endpoint { + remote-endpoint = <&admaif17_ep>; + }; + }; + + port@12 { + reg = <0x12>; + + xbar_admaif18_ep: endpoint { + remote-endpoint = <&admaif18_ep>; + }; + }; + + port@13 { + reg = <0x13>; + + xbar_admaif19_ep: endpoint { + remote-endpoint = <&admaif19_ep>; + }; + }; + + xbar_i2s1_port: port@14 { + reg = <0x14>; + + xbar_i2s1_ep: endpoint { + remote-endpoint = <&i2s1_cif_ep>; + }; + }; + + xbar_i2s2_port: port@15 { + reg = <0x15>; + + xbar_i2s2_ep: endpoint { + remote-endpoint = <&i2s2_cif_ep>; + }; + }; + + xbar_i2s4_port: port@17 { + reg = <0x17>; + + xbar_i2s4_ep: endpoint { + remote-endpoint = <&i2s4_cif_ep>; + }; + }; + + xbar_i2s6_port: port@19 { + reg = <0x19>; + + xbar_i2s6_ep: endpoint { + remote-endpoint = <&i2s6_cif_ep>; + }; + }; + + xbar_dmic3_port: port@1c { + reg = <0x1c>; + + xbar_dmic3_ep: endpoint { + remote-endpoint = <&dmic3_cif_ep>; + }; + }; + }; + + admaif@290f000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + admaif0_port: port@0 { + reg = <0x0>; + + admaif0_ep: endpoint { + remote-endpoint = <&xbar_admaif0_ep>; + }; + }; + + admaif1_port: port@1 { + reg = <0x1>; + + admaif1_ep: endpoint { + remote-endpoint = <&xbar_admaif1_ep>; + }; + }; + + admaif2_port: port@2 { + reg = <0x2>; + + admaif2_ep: endpoint { + remote-endpoint = <&xbar_admaif2_ep>; + }; + }; + + admaif3_port: port@3 { + reg = <0x3>; + + admaif3_ep: endpoint { + remote-endpoint = <&xbar_admaif3_ep>; + }; + }; + + admaif4_port: port@4 { + reg = <0x4>; + + admaif4_ep: endpoint { + remote-endpoint = <&xbar_admaif4_ep>; + }; + }; + + admaif5_port: port@5 { + reg = <0x5>; + + admaif5_ep: endpoint { + remote-endpoint = <&xbar_admaif5_ep>; + }; + }; + + admaif6_port: port@6 { + reg = <0x6>; + + admaif6_ep: endpoint { + remote-endpoint = <&xbar_admaif6_ep>; + }; + }; + + admaif7_port: port@7 { + reg = <0x7>; + + admaif7_ep: endpoint { + remote-endpoint = <&xbar_admaif7_ep>; + }; + }; + + admaif8_port: port@8 { + reg = <0x8>; + + admaif8_ep: endpoint { + remote-endpoint = <&xbar_admaif8_ep>; + }; + }; + + admaif9_port: port@9 { + reg = <0x9>; + + admaif9_ep: endpoint { + remote-endpoint = <&xbar_admaif9_ep>; + }; + }; + + admaif10_port: port@a { + reg = <0xa>; + + admaif10_ep: endpoint { + remote-endpoint = <&xbar_admaif10_ep>; + }; + }; + + admaif11_port: port@b { + reg = <0xb>; + + admaif11_ep: endpoint { + remote-endpoint = <&xbar_admaif11_ep>; + }; + }; + + admaif12_port: port@c { + reg = <0xc>; + + admaif12_ep: endpoint { + remote-endpoint = <&xbar_admaif12_ep>; + }; + }; + + admaif13_port: port@d { + reg = <0xd>; + + admaif13_ep: endpoint { + remote-endpoint = <&xbar_admaif13_ep>; + }; + }; + + admaif14_port: port@e { + reg = <0xe>; + + admaif14_ep: endpoint { + remote-endpoint = <&xbar_admaif14_ep>; + }; + }; + + admaif15_port: port@f { + reg = <0xf>; + + admaif15_ep: endpoint { + remote-endpoint = <&xbar_admaif15_ep>; + }; + }; + + admaif16_port: port@10 { + reg = <0x10>; + + admaif16_ep: endpoint { + remote-endpoint = <&xbar_admaif16_ep>; + }; + }; + + admaif17_port: port@11 { + reg = <0x11>; + + admaif17_ep: endpoint { + remote-endpoint = <&xbar_admaif17_ep>; + }; + }; + + admaif18_port: port@12 { + reg = <0x12>; + + admaif18_ep: endpoint { + remote-endpoint = <&xbar_admaif18_ep>; + }; + }; + + admaif19_port: port@13 { + reg = <0x13>; + + admaif19_ep: endpoint { + remote-endpoint = <&xbar_admaif19_ep>; + }; + }; + }; + }; + + i2s@2901000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s1_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s1_ep>; + }; + }; + + i2s1_port: port@1 { + reg = <1>; + + i2s1_dap_ep: endpoint { + dai-format = "i2s"; + remote-endpoint = <&rt5658_ep>; + }; + }; + }; + }; + + i2s@2901100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s2_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s2_ep>; + }; + }; + + i2s2_port: port@1 { + reg = <1>; + + i2s2_dap_ep: endpoint { + dai-format = "i2s"; + /* Place holder for external Codec */ + }; + }; + }; + }; + + i2s@2901300 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s4_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s4_ep>; + }; + }; + + i2s4_port: port@1 { + reg = <1>; + + i2s4_dap_ep: endpoint { + dai-format = "i2s"; + /* Place holder for external Codec */ + }; + }; + }; + }; + + i2s@2901500 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s6_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s6_ep>; + }; + }; + + i2s6_port: port@1 { + reg = <1>; + + i2s6_dap_ep: endpoint@0 { + dai-format = "i2s"; + /* Place holder for external Codec */ + }; + }; + }; + }; + + dmic@2904200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic3_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic3_ep>; + }; + }; + + dmic3_port: port@1 { + reg = <1>; + + dmic3_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + }; }; i2c@3160000 { @@ -57,6 +564,10 @@ pads { usb2 { lanes { + usb2-0 { + status = "okay"; + }; + usb2-1 { status = "okay"; }; @@ -73,6 +584,10 @@ status = "okay"; }; + usb3-2 { + status = "okay"; + }; + usb3-3 { status = "okay"; }; @@ -81,6 +596,11 @@ }; ports { + usb2-0 { + mode = "host"; + status = "okay"; + }; + usb2-1 { mode = "host"; status = "okay"; @@ -96,6 +616,11 @@ status = "okay"; }; + usb3-2 { + nvidia,usb2-companion = <0>; + status = "okay"; + }; + usb3-3 { nvidia,usb2-companion = <3>; maximum-speed = "super-speed"; @@ -107,11 +632,36 @@ usb@3610000 { status = "okay"; - phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>, + phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>, + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>, <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>, <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>, <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-3}>; - phy-names = "usb2-1", "usb2-3", "usb3-0", "usb3-3"; + phy-names = "usb2-0", "usb2-1", "usb2-3", "usb3-0", "usb3-2", "usb3-3"; + }; + + i2c@c250000 { + status = "okay"; + + rt5658: audio-codec@1a { + status = "okay"; + + compatible = "realtek,rt5658"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA194_MAIN_GPIO(S, 5) GPIO_ACTIVE_HIGH>; + realtek,jd-src = <2>; + sound-name-prefix = "CVB-RT"; + + port { + rt5658_ep: endpoint { + remote-endpoint = <&i2s1_dap_ep>; + mclk-fs = <256>; + clocks = <&bpmp TEGRA194_CLK_AUD_MCLK>; + }; + }; + }; }; pwm@c340000 { @@ -263,6 +813,47 @@ }; }; + sound { + compatible = "nvidia,tegra186-audio-graph-card"; + status = "okay"; + + dais = /* ADMAIF (FE) Ports */ + <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>, + <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>, + <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>, + <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>, + <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>, + /* XBAR Ports */ + <&xbar_i2s1_port>, <&xbar_i2s2_port>, <&xbar_i2s4_port>, + <&xbar_i2s6_port>, <&xbar_dmic3_port>, + /* BE I/O Ports */ + <&i2s1_port>, <&i2s2_port>, <&i2s4_port>, <&i2s6_port>, + <&dmic3_port>; + + label = "jetson-xavier-ape"; + + widgets = + "Microphone", "CVB-RT MIC Jack", + "Microphone", "CVB-RT MIC", + "Headphone", "CVB-RT HP Jack", + "Speaker", "CVB-RT SPK"; + + routing = + /* I2S1 <-> RT5658 */ + "CVB-RT AIF1 Playback", "I2S1 DAP-Playback", + "I2S1 DAP-Capture", "CVB-RT AIF1 Capture", + /* RT5658 Codec controls */ + "CVB-RT HP Jack", "CVB-RT HPO L Playback", + "CVB-RT HP Jack", "CVB-RT HPO R Playback", + "CVB-RT IN1P", "CVB-RT MIC Jack", + "CVB-RT IN2P", "CVB-RT MIC Jack", + "CVB-RT SPK", "CVB-RT SPO Playback", + "CVB-RT DMIC L1", "CVB-RT MIC", + "CVB-RT DMIC L2", "CVB-RT MIC", + "CVB-RT DMIC R1", "CVB-RT MIC", + "CVB-RT DMIC R2", "CVB-RT MIC"; + }; + thermal-zones { cpu { polling-delay = <0>; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts index 7f97b34216a0..1c3874b677c0 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts @@ -1,345 +1,10 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -#include <dt-bindings/input/linux-event-codes.h> -#include <dt-bindings/input/gpio-keys.h> - #include "tegra194-p3668-0000.dtsi" +#include "tegra194-p3509-0000.dtsi" / { - model = "NVIDIA Jetson Xavier NX Developer Kit"; + model = "NVIDIA Jetson Xavier NX Developer Kit (SD-card)"; compatible = "nvidia,p3509-0000+p3668-0000", "nvidia,tegra194"; - - bus@0 { - aconnect@2900000 { - status = "okay"; - - dma-controller@2930000 { - status = "okay"; - }; - - interrupt-controller@2a40000 { - status = "okay"; - }; - }; - - ddc: i2c@3190000 { - status = "okay"; - }; - - i2c@3160000 { - eeprom@57 { - compatible = "atmel,24c02"; - reg = <0x57>; - - label = "system"; - vcc-supply = <&vdd_1v8>; - address-width = <8>; - pagesize = <8>; - size = <256>; - read-only; - }; - }; - - hda@3510000 { - nvidia,model = "jetson-xavier-nx-hda"; - status = "okay"; - }; - - padctl@3520000 { - status = "okay"; - - pads { - usb2 { - lanes { - usb2-1 { - status = "okay"; - }; - - usb2-2 { - status = "okay"; - }; - }; - }; - - usb3 { - lanes { - usb3-2 { - status = "okay"; - }; - }; - }; - }; - - ports { - usb2-1 { - mode = "host"; - status = "okay"; - }; - - usb2-2 { - mode = "host"; - vbus-supply = <&vdd_5v0_sys>; - status = "okay"; - }; - - usb3-2 { - nvidia,usb2-companion = <1>; - vbus-supply = <&vdd_5v0_sys>; - status = "okay"; - }; - }; - }; - - usb@3610000 { - status = "okay"; - - phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>, - <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>, - <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>; - phy-names = "usb2-1", "usb2-2", "usb3-2"; - }; - - pwm@32d0000 { - status = "okay"; - }; - - host1x@13e00000 { - display-hub@15200000 { - status = "okay"; - }; - - dpaux@155c0000 { - status = "okay"; - }; - - dpaux@155d0000 { - status = "okay"; - }; - - /* DP0 */ - sor@15b00000 { - status = "okay"; - - avdd-io-hdmi-dp-supply = <&vdd_1v0>; - vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>; - - nvidia,dpaux = <&dpaux0>; - }; - - /* HDMI */ - sor@15b40000 { - status = "okay"; - - avdd-io-hdmi-dp-supply = <&vdd_1v0>; - vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>; - hdmi-supply = <&vdd_hdmi>; - - nvidia,ddc-i2c-bus = <&ddc>; - nvidia,hpd-gpio = <&gpio TEGRA194_MAIN_GPIO(M, 1) - GPIO_ACTIVE_LOW>; - }; - }; - }; - - pcie@14160000 { - status = "okay"; - - vddio-pex-ctl-supply = <&vdd_1v8ao>; - - phys = <&p2u_hsio_11>; - phy-names = "p2u-0"; - }; - - pcie@141a0000 { - status = "okay"; - - vddio-pex-ctl-supply = <&vdd_1v8ao>; - - phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, - <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, - <&p2u_nvhs_6>, <&p2u_nvhs_7>; - - phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", - "p2u-5", "p2u-6", "p2u-7"; - }; - - pcie_ep@141a0000 { - status = "disabled"; - - vddio-pex-ctl-supply = <&vdd_1v8ao>; - - reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>; - - nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5) - GPIO_ACTIVE_HIGH>; - - phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, - <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, - <&p2u_nvhs_6>, <&p2u_nvhs_7>; - - phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", - "p2u-5", "p2u-6", "p2u-7"; - }; - - fan: fan { - compatible = "pwm-fan"; - pwms = <&pwm6 0 45334>; - - cooling-levels = <0 64 128 255>; - #cooling-cells = <2>; - }; - - gpio-keys { - compatible = "gpio-keys"; - - force-recovery { - label = "Force Recovery"; - gpios = <&gpio TEGRA194_MAIN_GPIO(G, 0) - GPIO_ACTIVE_LOW>; - linux,input-type = <EV_KEY>; - linux,code = <KEY_SLEEP>; - debounce-interval = <10>; - }; - - power { - label = "Power"; - gpios = <&gpio_aon TEGRA194_AON_GPIO(EE, 4) - GPIO_ACTIVE_LOW>; - linux,input-type = <EV_KEY>; - linux,code = <KEY_POWER>; - debounce-interval = <10>; - wakeup-event-action = <EV_ACT_ASSERTED>; - wakeup-source; - }; - }; - - vdd_5v0_sys: regulator@100 { - compatible = "regulator-fixed"; - regulator-name = "VDD_5V_SYS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_3v3_sys: regulator@101 { - compatible = "regulator-fixed"; - regulator-name = "VDD_3V3_SYS"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_3v3_ao: regulator@102 { - compatible = "regulator-fixed"; - regulator-name = "VDD_3V3_AO"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_1v8: regulator@103 { - compatible = "regulator-fixed"; - regulator-name = "VDD_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_hdmi: regulator@104 { - compatible = "regulator-fixed"; - regulator-name = "VDD_5V0_HDMI_CON"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; - - thermal-zones { - cpu { - polling-delay = <0>; - polling-delay-passive = <500>; - status = "okay"; - - trips { - cpu_trip_critical: critical { - temperature = <96500>; - hysteresis = <0>; - type = "critical"; - }; - - cpu_trip_hot: hot { - temperature = <70000>; - hysteresis = <2000>; - type = "hot"; - }; - - cpu_trip_active: active { - temperature = <50000>; - hysteresis = <2000>; - type = "active"; - }; - - cpu_trip_passive: passive { - temperature = <30000>; - hysteresis = <2000>; - type = "passive"; - }; - }; - - cooling-maps { - cpu-critical { - cooling-device = <&fan 3 3>; - trip = <&cpu_trip_critical>; - }; - - cpu-hot { - cooling-device = <&fan 2 2>; - trip = <&cpu_trip_hot>; - }; - - cpu-active { - cooling-device = <&fan 1 1>; - trip = <&cpu_trip_active>; - }; - - cpu-passive { - cooling-device = <&fan 0 0>; - trip = <&cpu_trip_passive>; - }; - }; - }; - - gpu { - polling-delay = <0>; - polling-delay-passive = <500>; - status = "okay"; - - trips { - gpu_alert0: critical { - temperature = <99000>; - hysteresis = <0>; - type = "critical"; - }; - }; - }; - - aux { - polling-delay = <0>; - polling-delay-passive = <500>; - status = "okay"; - - trips { - aux_alert0: critical { - temperature = <90000>; - hysteresis = <0>; - type = "critical"; - }; - }; - }; - }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0001.dts b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0001.dts new file mode 100644 index 000000000000..238fd98e8e45 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0001.dts @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "tegra194-p3668-0001.dtsi" +#include "tegra194-p3509-0000.dtsi" + +/ { + model = "NVIDIA Jetson Xavier NX Developer Kit (eMMC)"; + compatible = "nvidia,p3509-0000+p3668-0001", "nvidia,tegra194"; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi new file mode 100644 index 000000000000..d1d77220154f --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi @@ -0,0 +1,351 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/input/gpio-keys.h> + +/ { + bus@0 { + aconnect@2900000 { + status = "okay"; + + dma-controller@2930000 { + status = "okay"; + }; + + interrupt-controller@2a40000 { + status = "okay"; + }; + }; + + ddc: i2c@3190000 { + status = "okay"; + }; + + i2c@3160000 { + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + + label = "system"; + vcc-supply = <&vdd_1v8>; + address-width = <8>; + pagesize = <8>; + size = <256>; + read-only; + }; + }; + + hda@3510000 { + nvidia,model = "jetson-xavier-nx-hda"; + status = "okay"; + }; + + padctl@3520000 { + status = "okay"; + + pads { + usb2 { + lanes { + usb2-1 { + status = "okay"; + }; + + usb2-2 { + status = "okay"; + }; + }; + }; + + usb3 { + lanes { + usb3-2 { + status = "okay"; + }; + }; + }; + }; + + ports { + usb2-1 { + mode = "host"; + status = "okay"; + }; + + usb2-2 { + mode = "host"; + vbus-supply = <&vdd_5v0_sys>; + status = "okay"; + }; + + usb3-2 { + nvidia,usb2-companion = <1>; + vbus-supply = <&vdd_5v0_sys>; + status = "okay"; + }; + }; + }; + + usb@3610000 { + status = "okay"; + + phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>, + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>; + phy-names = "usb2-1", "usb2-2", "usb3-2"; + }; + + spi@3270000 { + status = "okay"; + + flash@0 { + compatible = "spi-nor"; + reg = <0>; + spi-max-frequency = <102000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; + }; + + pwm@32d0000 { + status = "okay"; + }; + + host1x@13e00000 { + display-hub@15200000 { + status = "okay"; + }; + + dpaux@155c0000 { + status = "okay"; + }; + + dpaux@155d0000 { + status = "okay"; + }; + + /* DP0 */ + sor@15b00000 { + status = "okay"; + + avdd-io-hdmi-dp-supply = <&vdd_1v0>; + vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>; + + nvidia,dpaux = <&dpaux0>; + }; + + /* HDMI */ + sor@15b40000 { + status = "okay"; + + avdd-io-hdmi-dp-supply = <&vdd_1v0>; + vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>; + hdmi-supply = <&vdd_hdmi>; + + nvidia,ddc-i2c-bus = <&ddc>; + nvidia,hpd-gpio = <&gpio TEGRA194_MAIN_GPIO(M, 1) + GPIO_ACTIVE_LOW>; + }; + }; + }; + + pcie@14160000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + + phys = <&p2u_hsio_11>; + phy-names = "p2u-0"; + }; + + pcie@141a0000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; + + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + }; + + pcie_ep@141a0000 { + status = "disabled"; + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + + reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>; + + nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5) + GPIO_ACTIVE_HIGH>; + + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; + + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + }; + + fan: fan { + compatible = "pwm-fan"; + pwms = <&pwm6 0 45334>; + + cooling-levels = <0 64 128 255>; + #cooling-cells = <2>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + force-recovery { + label = "Force Recovery"; + gpios = <&gpio TEGRA194_MAIN_GPIO(G, 0) + GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_SLEEP>; + debounce-interval = <10>; + }; + + power { + label = "Power"; + gpios = <&gpio_aon TEGRA194_AON_GPIO(EE, 4) + GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_POWER>; + debounce-interval = <10>; + wakeup-event-action = <EV_ACT_ASSERTED>; + wakeup-source; + }; + }; + + vdd_5v0_sys: regulator@100 { + compatible = "regulator-fixed"; + regulator-name = "VDD_5V_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_3v3_sys: regulator@101 { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_SYS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_3v3_ao: regulator@102 { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_AO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8: regulator@103 { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_hdmi: regulator@104 { + compatible = "regulator-fixed"; + regulator-name = "VDD_5V0_HDMI_CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + thermal-zones { + cpu { + polling-delay = <0>; + polling-delay-passive = <500>; + status = "okay"; + + trips { + cpu_trip_critical: critical { + temperature = <96500>; + hysteresis = <0>; + type = "critical"; + }; + + cpu_trip_hot: hot { + temperature = <70000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu_trip_active: active { + temperature = <50000>; + hysteresis = <2000>; + type = "active"; + }; + + cpu_trip_passive: passive { + temperature = <30000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + cpu-critical { + cooling-device = <&fan 3 3>; + trip = <&cpu_trip_critical>; + }; + + cpu-hot { + cooling-device = <&fan 2 2>; + trip = <&cpu_trip_hot>; + }; + + cpu-active { + cooling-device = <&fan 1 1>; + trip = <&cpu_trip_active>; + }; + + cpu-passive { + cooling-device = <&fan 0 0>; + trip = <&cpu_trip_passive>; + }; + }; + }; + + gpu { + polling-delay = <0>; + polling-delay-passive = <500>; + status = "okay"; + + trips { + gpu_alert0: critical { + temperature = <99000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + aux { + polling-delay = <0>; + polling-delay-passive = <500>; + status = "okay"; + + trips { + aux_alert0: critical { + temperature = <90000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi index 0dc8304a2edd..7da3d48cb410 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi @@ -1,79 +1,11 @@ // SPDX-License-Identifier: GPL-2.0 -#include "tegra194.dtsi" - -#include <dt-bindings/mfd/max77620.h> +#include "tegra194-p3668.dtsi" / { - model = "NVIDIA Jetson Xavier NX"; + model = "NVIDIA Jetson Xavier NX (SD-card)"; compatible = "nvidia,p3668-0000", "nvidia,tegra194"; - aliases { - ethernet0 = "/bus@0/ethernet@2490000"; - i2c0 = "/bpmp/i2c"; - i2c1 = "/bus@0/i2c@3160000"; - i2c2 = "/bus@0/i2c@c240000"; - i2c3 = "/bus@0/i2c@3180000"; - i2c4 = "/bus@0/i2c@3190000"; - i2c5 = "/bus@0/i2c@31c0000"; - i2c6 = "/bus@0/i2c@c250000"; - i2c7 = "/bus@0/i2c@31e0000"; - mmc0 = "/bus@0/mmc@3460000"; - rtc0 = "/bpmp/i2c/pmic@3c"; - rtc1 = "/bus@0/rtc@c2a0000"; - serial0 = &tcu; - }; - - chosen { - bootargs = "console=ttyS0,115200n8"; - stdout-path = "serial0:115200n8"; - }; - bus@0 { - ethernet@2490000 { - status = "okay"; - - phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(R, 1) GPIO_ACTIVE_LOW>; - phy-handle = <&phy>; - phy-mode = "rgmii-id"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy: phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0x0>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA194_MAIN_GPIO(G, 4) IRQ_TYPE_LEVEL_LOW>; - #phy-cells = <0>; - }; - }; - }; - - memory-controller@2c00000 { - status = "okay"; - }; - - serial@3100000 { - status = "okay"; - }; - - i2c@3160000 { - status = "okay"; - - eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - - label = "module"; - vcc-supply = <&vdd_1v8ls>; - address-width = <8>; - pagesize = <8>; - size = <256>; - read-only; - }; - }; - /* SDMMC1 (SD/MMC) */ mmc@3400000 { status = "okay"; @@ -82,216 +14,6 @@ disable-wp; vmmc-supply = <&vdd_3v3_sd>; }; - - padctl@3520000 { - avdd-usb-supply = <&vdd_usb_3v3>; - vclamp-usb-supply = <&vdd_1v8ao>; - - ports { - usb2-1 { - vbus-supply = <&vdd_5v0_sys>; - }; - - usb2-3 { - vbus-supply = <&vdd_5v0_sys>; - }; - - usb3-0 { - vbus-supply = <&vdd_5v0_sys>; - }; - - usb3-3 { - vbus-supply = <&vdd_5v0_sys>; - }; - }; - }; - - rtc@c2a0000 { - status = "okay"; - }; - - pmc@c360000 { - nvidia,invert-interrupt; - }; - }; - - bpmp { - i2c { - status = "okay"; - - pmic: pmic@3c { - compatible = "maxim,max20024"; - reg = <0x3c>; - - interrupt-parent = <&pmc>; - interrupts = <24 IRQ_TYPE_LEVEL_LOW>; - #interrupt-cells = <2>; - interrupt-controller; - - #gpio-cells = <2>; - gpio-controller; - - pinctrl-names = "default"; - pinctrl-0 = <&max20024_default>; - - max20024_default: pinmux { - gpio0 { - pins = "gpio0"; - function = "gpio"; - }; - - gpio1 { - pins = "gpio1"; - function = "fps-out"; - maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>; - }; - - gpio2 { - pins = "gpio2"; - function = "fps-out"; - maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>; - }; - - gpio3 { - pins = "gpio3"; - function = "fps-out"; - maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>; - }; - - gpio4 { - pins = "gpio4"; - function = "32k-out1"; - drive-push-pull = <1>; - }; - - gpio6 { - pins = "gpio6"; - function = "gpio"; - drive-push-pull = <1>; - }; - - gpio7 { - pins = "gpio7"; - function = "gpio"; - drive-push-pull = <0>; - }; - }; - - fps { - fps0 { - maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; - maxim,shutdown-fps-time-period-us = <640>; - }; - - fps1 { - maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>; - maxim,shutdown-fps-time-period-us = <640>; - maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>; - }; - - fps2 { - maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; - maxim,shutdown-fps-time-period-us = <640>; - }; - }; - - regulators { - in-sd0-supply = <&vdd_5v0_sys>; - in-sd1-supply = <&vdd_5v0_sys>; - in-sd2-supply = <&vdd_5v0_sys>; - in-sd3-supply = <&vdd_5v0_sys>; - in-sd4-supply = <&vdd_5v0_sys>; - - in-ldo0-1-supply = <&vdd_5v0_sys>; - in-ldo2-supply = <&vdd_5v0_sys>; - in-ldo3-5-supply = <&vdd_5v0_sys>; - in-ldo4-6-supply = <&vdd_5v0_sys>; - in-ldo7-8-supply = <&vdd_1v8ls>; - - vdd_1v0: sd0 { - regulator-name = "VDDIO_SYS_1V0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_1v8hs: sd1 { - regulator-name = "VDDIO_SYS_1V8HS"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_1v8ls: sd2 { - regulator-name = "VDDIO_SYS_1V8LS"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_1v8ao: sd3 { - regulator-name = "VDDIO_AO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - sd4 { - regulator-name = "VDD_DDR_1V1"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo0 { - regulator-name = "VDD_RTC"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo2 { - regulator-name = "VDDIO_AO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo3 { - regulator-name = "VDD_EMMC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vdd_usb_3v3: ldo5 { - regulator-name = "VDD_USB_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo6 { - regulator-name = "VDD_SDIO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo7 { - regulator-name = "AVDD_CSI_1V2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - }; - }; - }; }; vdd_3v3_sd: regulator@0 { diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3668-0001.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0001.dtsi new file mode 100644 index 000000000000..b7808648cfe4 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0001.dtsi @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "tegra194-p3668.dtsi" + +/ { + model = "NVIDIA Jetson Xavier NX (eMMC)"; + compatible = "nvidia,p3668-0001", "nvidia,tegra194"; + + bus@0 { + /* SDMMC4 (eMMC) */ + mmc@3460000 { + status = "okay"; + bus-width = <8>; + non-removable; + + vqmmc-supply = <&vdd_1v8ls>; + vmmc-supply = <&vdd_emmc_3v3>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi new file mode 100644 index 000000000000..4f12721c332b --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi @@ -0,0 +1,284 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "tegra194.dtsi" + +#include <dt-bindings/mfd/max77620.h> + +/ { + aliases { + ethernet0 = "/bus@0/ethernet@2490000"; + i2c0 = "/bpmp/i2c"; + i2c1 = "/bus@0/i2c@3160000"; + i2c2 = "/bus@0/i2c@c240000"; + i2c3 = "/bus@0/i2c@3180000"; + i2c4 = "/bus@0/i2c@3190000"; + i2c5 = "/bus@0/i2c@31c0000"; + i2c6 = "/bus@0/i2c@c250000"; + i2c7 = "/bus@0/i2c@31e0000"; + mmc0 = "/bus@0/mmc@3460000"; + rtc0 = "/bpmp/i2c/pmic@3c"; + rtc1 = "/bus@0/rtc@c2a0000"; + serial0 = &tcu; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + stdout-path = "serial0:115200n8"; + }; + + bus@0 { + ethernet@2490000 { + status = "okay"; + + phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(R, 1) GPIO_ACTIVE_LOW>; + phy-handle = <&phy>; + phy-mode = "rgmii-id"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA194_MAIN_GPIO(G, 4) IRQ_TYPE_LEVEL_LOW>; + #phy-cells = <0>; + }; + }; + }; + + memory-controller@2c00000 { + status = "okay"; + }; + + serial@3100000 { + status = "okay"; + }; + + i2c@3160000 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + + label = "module"; + vcc-supply = <&vdd_1v8ls>; + address-width = <8>; + pagesize = <8>; + size = <256>; + read-only; + }; + }; + + padctl@3520000 { + avdd-usb-supply = <&vdd_usb_3v3>; + vclamp-usb-supply = <&vdd_1v8ao>; + + ports { + usb2-1 { + vbus-supply = <&vdd_5v0_sys>; + }; + + usb2-3 { + vbus-supply = <&vdd_5v0_sys>; + }; + + usb3-0 { + vbus-supply = <&vdd_5v0_sys>; + }; + + usb3-3 { + vbus-supply = <&vdd_5v0_sys>; + }; + }; + }; + + rtc@c2a0000 { + status = "okay"; + }; + + pmc@c360000 { + nvidia,invert-interrupt; + }; + }; + + bpmp { + i2c { + status = "okay"; + + pmic: pmic@3c { + compatible = "maxim,max20024"; + reg = <0x3c>; + + interrupt-parent = <&pmc>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + #interrupt-cells = <2>; + interrupt-controller; + + #gpio-cells = <2>; + gpio-controller; + + pinctrl-names = "default"; + pinctrl-0 = <&max20024_default>; + + max20024_default: pinmux { + gpio0 { + pins = "gpio0"; + function = "gpio"; + }; + + gpio1 { + pins = "gpio1"; + function = "fps-out"; + maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>; + }; + + gpio2 { + pins = "gpio2"; + function = "fps-out"; + maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>; + }; + + gpio3 { + pins = "gpio3"; + function = "fps-out"; + maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>; + }; + + gpio4 { + pins = "gpio4"; + function = "32k-out1"; + drive-push-pull = <1>; + }; + + gpio6 { + pins = "gpio6"; + function = "gpio"; + drive-push-pull = <1>; + }; + + gpio7 { + pins = "gpio7"; + function = "gpio"; + drive-push-pull = <0>; + }; + }; + + fps { + fps0 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + maxim,shutdown-fps-time-period-us = <640>; + }; + + fps1 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>; + maxim,shutdown-fps-time-period-us = <640>; + maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>; + }; + + fps2 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + maxim,shutdown-fps-time-period-us = <640>; + }; + }; + + regulators { + in-sd0-supply = <&vdd_5v0_sys>; + in-sd1-supply = <&vdd_5v0_sys>; + in-sd2-supply = <&vdd_5v0_sys>; + in-sd3-supply = <&vdd_5v0_sys>; + in-sd4-supply = <&vdd_5v0_sys>; + + in-ldo0-1-supply = <&vdd_5v0_sys>; + in-ldo2-supply = <&vdd_5v0_sys>; + in-ldo3-5-supply = <&vdd_5v0_sys>; + in-ldo4-6-supply = <&vdd_5v0_sys>; + in-ldo7-8-supply = <&vdd_1v8ls>; + + vdd_1v0: sd0 { + regulator-name = "VDDIO_SYS_1V0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8hs: sd1 { + regulator-name = "VDDIO_SYS_1V8HS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8ls: sd2 { + regulator-name = "VDDIO_SYS_1V8LS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8ao: sd3 { + regulator-name = "VDDIO_AO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + sd4 { + regulator-name = "VDD_DDR_1V1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo0 { + regulator-name = "VDD_RTC"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo2 { + regulator-name = "VDDIO_AO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_emmc_3v3: ldo3 { + regulator-name = "VDD_EMMC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vdd_usb_3v3: ldo5 { + regulator-name = "VDD_USB_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo6 { + regulator-name = "VDD_SDIO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo7 { + regulator-name = "AVDD_CSI_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index 25f36d6118f8..9449156fae39 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -609,6 +609,34 @@ status = "disabled"; }; + spi@3270000 { + compatible = "nvidia,tegra194-qspi"; + reg = <0x3270000 0x1000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp TEGRA194_CLK_QSPI0>, + <&bpmp TEGRA194_CLK_QSPI0_PM>; + clock-names = "qspi", "qspi_out"; + resets = <&bpmp TEGRA194_RESET_QSPI0>; + reset-names = "qspi"; + status = "disabled"; + }; + + spi@3300000 { + compatible = "nvidia,tegra194-qspi"; + reg = <0x3300000 0x1000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp TEGRA194_CLK_QSPI1>, + <&bpmp TEGRA194_CLK_QSPI1_PM>; + clock-names = "qspi", "qspi_out"; + resets = <&bpmp TEGRA194_RESET_QSPI1>; + reset-names = "qspi"; + status = "disabled"; + }; + pwm1: pwm@3280000 { compatible = "nvidia,tegra194-pwm", "nvidia,tegra186-pwm"; @@ -2323,6 +2351,26 @@ method = "smc"; }; + sound { + status = "disabled"; + + clocks = <&bpmp TEGRA194_CLK_PLLA>, + <&bpmp TEGRA194_CLK_PLLA_OUT0>; + clock-names = "pll_a", "plla_out0"; + assigned-clocks = <&bpmp TEGRA194_CLK_PLLA>, + <&bpmp TEGRA194_CLK_PLLA_OUT0>, + <&bpmp TEGRA194_CLK_AUD_MCLK>; + assigned-clock-parents = <0>, + <&bpmp TEGRA194_CLK_PLLA>, + <&bpmp TEGRA194_CLK_PLLA_OUT0>; + /* + * PLLA supports dynamic ramp. Below initial rate is chosen + * for this to work and oscillate between base rates required + * for 8x and 11.025x sample rate streams. + */ + assigned-clock-rates = <258000000>; + }; + tcu: tcu { compatible = "nvidia,tegra194-tcu"; mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_SM TEGRA_HSP_SM_RX(0)>, diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts index 69102dcea8b0..497635af7fab 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts @@ -126,5 +126,304 @@ interrupt-controller@702f9000 { status = "okay"; }; + + ahub@702d0800 { + status = "okay"; + + admaif@702d0000 { + status = "okay"; + }; + + i2s@702d1000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s1_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s1_ep>; + }; + }; + + i2s1_port: port@1 { + reg = <1>; + + i2s1_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + i2s@702d1100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s2_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s2_ep>; + }; + }; + + i2s2_port: port@1 { + reg = <1>; + + i2s2_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + i2s@702d1200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s3_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s3_ep>; + }; + }; + + i2s3_port: port@1 { + reg = <1>; + + i2s3_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + i2s@702d1300 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s4_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s4_ep>; + }; + }; + + i2s4_port: port@1 { + reg = <1>; + + i2s4_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + i2s@702d1400 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s5_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s5_ep>; + }; + }; + + i2s5_port: port@1 { + reg = <1>; + + i2s5_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + dmic@702d4000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic1_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic1_ep>; + }; + }; + + dmic1_port: port@1 { + reg = <1>; + + dmic1_dap_ep: endpoint { + /* Placeholder for external Codec */ + }; + }; + }; + }; + + dmic@702d4100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic2_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic2_ep>; + }; + }; + + dmic2_port: port@1 { + reg = <1>; + + dmic2_dap_ep: endpoint { + /* Placeholder for external Codec */ + }; + }; + }; + }; + + dmic@702d4200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic3_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic3_ep>; + }; + }; + + dmic3_port: port@1 { + reg = <1>; + + dmic3_dap_ep: endpoint { + /* Placeholder for external Codec */ + }; + }; + }; + }; + + ports { + xbar_i2s1_port: port@a { + reg = <0xa>; + + xbar_i2s1_ep: endpoint { + remote-endpoint = <&i2s1_cif_ep>; + }; + }; + + xbar_i2s2_port: port@b { + reg = <0xb>; + + xbar_i2s2_ep: endpoint { + remote-endpoint = <&i2s2_cif_ep>; + }; + }; + + xbar_i2s3_port: port@c { + reg = <0xc>; + + xbar_i2s3_ep: endpoint { + remote-endpoint = <&i2s3_cif_ep>; + }; + }; + + xbar_i2s4_port: port@d { + reg = <0xd>; + + xbar_i2s4_ep: endpoint { + remote-endpoint = <&i2s4_cif_ep>; + }; + }; + + xbar_i2s5_port: port@e { + reg = <0xe>; + + xbar_i2s5_ep: endpoint { + remote-endpoint = <&i2s5_cif_ep>; + }; + }; + + xbar_dmic1_port: port@f { + reg = <0xf>; + + xbar_dmic1_ep: endpoint { + remote-endpoint = <&dmic1_cif_ep>; + }; + }; + + xbar_dmic2_port: port@10 { + reg = <0x10>; + + xbar_dmic2_ep: endpoint { + remote-endpoint = <&dmic2_cif_ep>; + }; + }; + + xbar_dmic3_port: port@11 { + reg = <0x11>; + + xbar_dmic3_ep: endpoint { + remote-endpoint = <&dmic3_cif_ep>; + }; + }; + }; + }; + }; + + sound { + compatible = "nvidia,tegra210-audio-graph-card"; + status = "okay"; + + dais = /* FE */ + <&admaif1_port>, <&admaif2_port>, <&admaif3_port>, + <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, + <&admaif7_port>, <&admaif8_port>, <&admaif9_port>, + <&admaif10_port>, + /* Router */ + <&xbar_i2s1_port>, <&xbar_i2s2_port>, <&xbar_i2s3_port>, + <&xbar_i2s4_port>, <&xbar_i2s5_port>, <&xbar_dmic1_port>, + <&xbar_dmic2_port>, <&xbar_dmic3_port>, + /* I/O DAP Ports */ + <&i2s1_port>, <&i2s2_port>, <&i2s3_port>, <&i2s4_port>, + <&i2s5_port>, <&dmic1_port>, <&dmic2_port>, <&dmic3_port>; + + label = "jetson-tx1-ape"; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts index 6a877decffc1..14c128a5e248 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts @@ -636,6 +636,162 @@ interrupt-controller@702f9000 { status = "okay"; }; + + ahub@702d0800 { + status = "okay"; + + admaif@702d0000 { + status = "okay"; + }; + + i2s@702d1200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s3_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s3_ep>; + }; + }; + + i2s3_port: port@1 { + reg = <1>; + + i2s3_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + i2s@702d1300 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s4_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s4_ep>; + }; + }; + + i2s4_port: port@1 { + reg = <1>; + + i2s4_dap_ep: endpoint@0 { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + dmic@702d4000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic1_cif_ep: endpoint@0 { + remote-endpoint = <&xbar_dmic1_ep>; + }; + }; + + dmic1_port: port@1 { + reg = <1>; + + dmic1_dap_ep: endpoint@0 { + /* Placeholder for external Codec */ + }; + }; + }; + }; + + dmic@702d4100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic2_cif_ep: endpoint@0 { + remote-endpoint = <&xbar_dmic2_ep>; + }; + }; + + dmic2_port: port@1 { + reg = <1>; + + dmic2_dap_ep: endpoint@0 { + /* Placeholder for external Codec */ + }; + }; + }; + }; + + ports { + xbar_i2s3_port: port@c { + reg = <0xc>; + + xbar_i2s3_ep: endpoint { + remote-endpoint = <&i2s3_cif_ep>; + }; + }; + + xbar_i2s4_port: port@d { + reg = <0xd>; + + xbar_i2s4_ep: endpoint { + remote-endpoint = <&i2s4_cif_ep>; + }; + }; + + xbar_dmic1_port: port@f { + reg = <0xf>; + + xbar_dmic1_ep: endpoint { + remote-endpoint = <&dmic1_cif_ep>; + }; + }; + + xbar_dmic2_port: port@10 { + reg = <0x10>; + + xbar_dmic2_ep: endpoint { + remote-endpoint = <&dmic2_cif_ep>; + }; + }; + }; + }; + }; + + spi@70410000 { + status = "okay"; + + flash@0 { + compatible = "spi-nor"; + reg = <0>; + spi-max-frequency = <104000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; }; clk32k_in: clock@0 { @@ -870,4 +1026,23 @@ vin-supply = <&vdd_5v0_sys>; }; + + sound { + compatible = "nvidia,tegra210-audio-graph-card"; + status = "okay"; + + dais = /* FE */ + <&admaif1_port>, <&admaif2_port>, <&admaif3_port>, + <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, + <&admaif7_port>, <&admaif8_port>, <&admaif9_port>, + <&admaif10_port>, + /* Router */ + <&xbar_i2s3_port>, <&xbar_i2s4_port>, + <&xbar_dmic1_port>, <&xbar_dmic2_port>, + /* I/O DAP Ports */ + <&i2s3_port>, <&i2s4_port>, + <&dmic1_port>, <&dmic2_port>; + + label = "jetson-nano-ape"; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 4fbf8c15b0a1..26b3f98a211c 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -997,6 +997,7 @@ <&tegra_car 128>, /* hda2hdmi */ <&tegra_car 111>; /* hda2codec_2x */ reset-names = "hda", "hda2hdmi", "hda2codec_2x"; + power-domains = <&pd_sor>; status = "disabled"; }; @@ -1043,6 +1044,7 @@ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; resets = <&tegra_car 142>; reset-names = "padctl"; + nvidia,pmc = <&tegra_pmc>; status = "disabled"; @@ -1307,6 +1309,32 @@ status = "disabled"; }; + soctherm: thermal-sensor@700e2000 { + compatible = "nvidia,tegra210-soctherm"; + reg = <0x0 0x700e2000 0x0 0x600>, /* SOC_THERM reg_base */ + <0x0 0x60006000 0x0 0x400>; /* CAR reg_base */ + reg-names = "soctherm-reg", "car-reg"; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "thermal", "edp"; + clocks = <&tegra_car TEGRA210_CLK_TSENSOR>, + <&tegra_car TEGRA210_CLK_SOC_THERM>; + clock-names = "tsensor", "soctherm"; + resets = <&tegra_car 78>; + reset-names = "soctherm"; + #thermal-sensor-cells = <1>; + + throttle-cfgs { + throttle_heavy: heavy { + nvidia,priority = <100>; + nvidia,cpu-throt-percent = <85>; + nvidia,gpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>; + + #cooling-cells = <2>; + }; + }; + }; + mipi: mipi@700e3000 { compatible = "nvidia,tegra210-mipi"; reg = <0x0 0x700e3000 0x0 0x100>; @@ -1425,6 +1453,91 @@ "rx9", "tx9", "rx10", "tx10"; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + admaif1_port: port@0 { + reg = <0>; + + admaif1_ep: endpoint { + remote-endpoint = <&xbar_admaif1_ep>; + }; + }; + + admaif2_port: port@1 { + reg = <1>; + + admaif2_ep: endpoint { + remote-endpoint = <&xbar_admaif2_ep>; + }; + }; + + admaif3_port: port@2 { + reg = <2>; + + admaif3_ep: endpoint { + remote-endpoint = <&xbar_admaif3_ep>; + }; + }; + + admaif4_port: port@3 { + reg = <3>; + + admaif4_ep: endpoint { + remote-endpoint = <&xbar_admaif4_ep>; + }; + }; + + admaif5_port: port@4 { + reg = <4>; + + admaif5_ep: endpoint { + remote-endpoint = <&xbar_admaif5_ep>; + }; + }; + + admaif6_port: port@5 { + reg = <5>; + + admaif6_ep: endpoint { + remote-endpoint = <&xbar_admaif6_ep>; + }; + }; + + admaif7_port: port@6 { + reg = <6>; + + admaif7_ep: endpoint { + remote-endpoint = <&xbar_admaif7_ep>; + }; + }; + + admaif8_port: port@7 { + reg = <7>; + + admaif8_ep: endpoint { + remote-endpoint = <&xbar_admaif8_ep>; + }; + }; + + admaif9_port: port@8 { + reg = <8>; + + admaif9_ep: endpoint { + remote-endpoint = <&xbar_admaif9_ep>; + }; + }; + + admaif10_port: port@9 { + reg = <9>; + + admaif10_ep: endpoint { + remote-endpoint = <&xbar_admaif10_ep>; + }; + }; + }; }; tegra_i2s1: i2s@702d1000 { @@ -1527,6 +1640,89 @@ sound-name-prefix = "DMIC3"; status = "disabled"; }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + xbar_admaif1_ep: endpoint { + remote-endpoint = <&admaif1_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + xbar_admaif2_ep: endpoint { + remote-endpoint = <&admaif2_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + xbar_admaif3_ep: endpoint { + remote-endpoint = <&admaif3_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + xbar_admaif4_ep: endpoint { + remote-endpoint = <&admaif4_ep>; + }; + }; + + port@4 { + reg = <0x4>; + xbar_admaif5_ep: endpoint { + remote-endpoint = <&admaif5_ep>; + }; + }; + port@5 { + reg = <0x5>; + + xbar_admaif6_ep: endpoint { + remote-endpoint = <&admaif6_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + xbar_admaif7_ep: endpoint { + remote-endpoint = <&admaif7_ep>; + }; + }; + + port@7 { + reg = <0x7>; + + xbar_admaif8_ep: endpoint { + remote-endpoint = <&admaif8_ep>; + }; + }; + + port@8 { + reg = <0x8>; + + xbar_admaif9_ep: endpoint { + remote-endpoint = <&admaif9_ep>; + }; + }; + + port@9 { + reg = <0x9>; + + xbar_admaif10_ep: endpoint { + remote-endpoint = <&admaif10_ep>; + }; + }; + }; }; }; @@ -1536,8 +1732,9 @@ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car TEGRA210_CLK_QSPI>; - clock-names = "qspi"; + clocks = <&tegra_car TEGRA210_CLK_QSPI>, + <&tegra_car TEGRA210_CLK_QSPI_PM>; + clock-names = "qspi", "qspi_out"; resets = <&tegra_car 211>; reset-names = "qspi"; dmas = <&apbdma 5>, <&apbdma 5>; @@ -1692,44 +1889,18 @@ &{/cpus/cpu@2} &{/cpus/cpu@3}>; }; - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - interrupt-parent = <&gic>; - arm,no-tick-in-suspend; - }; - - soctherm: thermal-sensor@700e2000 { - compatible = "nvidia,tegra210-soctherm"; - reg = <0x0 0x700e2000 0x0 0x600>, /* SOC_THERM reg_base */ - <0x0 0x60006000 0x0 0x400>; /* CAR reg_base */ - reg-names = "soctherm-reg", "car-reg"; - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "thermal", "edp"; - clocks = <&tegra_car TEGRA210_CLK_TSENSOR>, - <&tegra_car TEGRA210_CLK_SOC_THERM>; - clock-names = "tsensor", "soctherm"; - resets = <&tegra_car 78>; - reset-names = "soctherm"; - #thermal-sensor-cells = <1>; + sound { + status = "disabled"; - throttle-cfgs { - throttle_heavy: heavy { - nvidia,priority = <100>; - nvidia,cpu-throt-percent = <85>; - nvidia,gpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_PLL_A>, + <&tegra_car TEGRA210_CLK_PLL_A_OUT0>; + clock-names = "pll_a", "plla_out0"; - #cooling-cells = <2>; - }; - }; + assigned-clocks = <&tegra_car TEGRA210_CLK_PLL_A>, + <&tegra_car TEGRA210_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA210_CLK_EXTERN1>; + assigned-clock-parents = <0>, <0>, <&tegra_car TEGRA210_CLK_PLL_A_OUT0>; + assigned-clock-rates = <368640000>, <49152000>, <12288000>; }; thermal-zones { @@ -1866,4 +2037,18 @@ }; }; }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-parent = <&gic>; + arm,no-tick-in-suspend; + }; }; diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 5113fac80b7a..549a7a2151d4 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -1,19 +1,27 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb +dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb -dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-talkman.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-octagon-talkman.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-xiaomi-libra.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb -dtb-$(CONFIG_ARCH_QCOM) += msm8994-msft-lumia-cityman.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8994-msft-lumia-octagon-cityman.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-ivy.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-karin.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-satsuki.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-sumire.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-suzuran.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb @@ -43,9 +51,12 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-enchilada.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-fajita.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 3a9538e1ec97..6aef0c2e4f0a 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -301,6 +301,10 @@ status = "okay"; }; +&mdss { + status = "okay"; +}; + &pm8916_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; diff --git a/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts b/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts new file mode 100644 index 000000000000..a8dffc8c64ea --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +/dts-v1/; + +/* As the names may imply, there is quite a bunch of duplication there. */ +#include "msm8994-sony-xperia-kitakami-karin.dts" + +/ { + model = "Sony Xperia Z4 Tablet (Wi-Fi)"; + compatible = "sony,karin_windy", "qcom,apq8094"; + + /* + * This model uses the APQ variant of MSM8994 (APQ8094). + * The v1/v2/v2.1 story (from kitakami.dtsi) also applies here. + */ + qcom,msm-id = <253 0x20000>, <253 0x20001>; +}; + +/delete-node/ &pm8994_l1; +/delete-node/ &pm8994_l19; diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts new file mode 100644 index 000000000000..540b1fa4b260 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts @@ -0,0 +1,291 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Alcatel OneTouch Idol 3 (4.7)"; + compatible = "alcatel,idol347", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&msmgpio 69 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_id_default>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp_i2c5 { + status = "okay"; + + magnetometer@c { + compatible = "asahi-kasei,ak09911"; + reg = <0x0c>; + vdd-supply = <&pm8916_l17>; + vid-supply = <&pm8916_l6>; + reset-gpios = <&msmgpio 8 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&mag_reset_default>; + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + }; + + accelerometer@f { + compatible = "kionix,kxtj21009"; + reg = <0x0f>; + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + interrupt-parent = <&msmgpio>; + interrupts = <31 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&accel_int_default>; + mount-matrix = "-1", "0", "0", + "0", "1", "0", + "0", "0", "-1"; + }; + + proximity@48 { + compatible = "sensortek,stk3310"; + reg = <0x48>; + interrupt-parent = <&msmgpio>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&proximity_int_default>; + }; + + gyroscope@68 { + compatible = "bosch,bmg160"; + reg = <0x68>; + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + interrupt-parent = <&msmgpio>; + interrupts = <97 IRQ_TYPE_EDGE_RISING>, + <98 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&gyro_int_default>; + }; +}; + +&pm8916_resin { + status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; +}; + +&pm8916_vib { + status = "okay"; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; +}; + +&usb { + status = "okay"; + extcon = <&usb_id>, <&usb_id>; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + accel_int_default: accel-int-default { + pins = "gpio31"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default { + pins = "gpio107"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + gyro_int_default: gyro-int-default { + pins = "gpio97", "gpio98"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + mag_reset_default: mag-reset-default { + pins = "gpio8"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + proximity_int_default: proximity-int-default { + pins = "gpio12"; + function = "gpio"; + + drive-strength = <6>; + bias-pull-up; + }; + + usb_id_default: usb-id-default { + pins = "gpio69"; + function = "gpio"; + + drive-strength = <8>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts new file mode 100644 index 000000000000..cee451e59385 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts @@ -0,0 +1,195 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Asus Zenfone 2 Laser"; + compatible = "asus,z00l", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + + volume-down { + label = "Volume Down"; + gpios = <&msmgpio 117 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <15>; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_id_default>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&usb { + status = "okay"; + extcon = <&usb_id>, <&usb_id>; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + gpio_keys_default: gpio-keys-default { + pins = "gpio107", "gpio117"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + usb_id_default: usb-id-default { + pins = "gpio110"; + function = "gpio"; + + drive-strength = <8>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts new file mode 100644 index 000000000000..27845189ac2b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts @@ -0,0 +1,267 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "BQ Aquaris X5 (Longcheer L8910)"; + compatible = "longcheer,l8910", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + gpios = <&msmgpio 17 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_WHITE>; + default-state = "off"; + function = LED_FUNCTION_KBD_BACKLIGHT; + + pinctrl-names = "default"; + pinctrl-0 = <&button_backlight_default>; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_id_default>; + }; +}; + +&blsp_i2c3 { + status = "okay"; + + magnetometer@d { + compatible = "asahi-kasei,ak09911"; + reg = <0x0d>; + + vdd-supply = <&pm8916_l17>; + vid-supply = <&pm8916_l6>; + + reset-gpios = <&msmgpio 111 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&mag_reset_default>; + }; + + imu@68 { + compatible = "bosch,bmi160"; + reg = <0x68>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&pm8916_resin { + status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; +}; + +&pm8916_vib { + status = "okay"; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; +}; + +&usb { + status = "okay"; + extcon = <&usb_id>, <&usb_id>; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + button_backlight_default: button-backlight-default { + pins = "gpio17"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default { + pins = "gpio107"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + mag_reset_default: mag-reset-default { + pins = "gpio111"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + usb_id_default: usb-id-default { + pins = "gpio110"; + function = "gpio"; + + drive-strength = <8>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi index 4dc437f13fa5..7dedb91b9930 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi @@ -220,6 +220,22 @@ bias-disable; }; + i2c3_default: i2c3-default { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + + drive-strength = <2>; + bias-disable; + }; + + i2c3_sleep: i2c3-sleep { + pins = "gpio10", "gpio11"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + i2c4_default: i2c4-default { pins = "gpio14", "gpio15"; function = "blsp_i2c4"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index f91269492d72..230ba3ce3277 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -106,6 +106,9 @@ interrupt-parent = <&msmgpio>; interrupts = <115 IRQ_TYPE_EDGE_RISING>; + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l5>; + pinctrl-names = "default"; pinctrl-0 = <&accel_int_default>; }; @@ -113,6 +116,9 @@ magnetometer@12 { compatible = "bosch,bmc150_magn"; reg = <0x12>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l5>; }; }; @@ -126,6 +132,10 @@ pinctrl-1 = <&mdss_sleep>; }; +&mdss { + status = "okay"; +}; + &pm8916_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts index e39c04d977c2..dd35c3344358 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts @@ -38,7 +38,7 @@ &pronto { iris { - compatible = "qcom,wcn3680"; + compatible = "qcom,wcn3660b"; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 402e891a84ab..5353da521974 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -56,7 +56,7 @@ no-map; }; - reserved@8668000 { + reserved@86680000 { reg = <0x0 0x86680000 0x0 0x80000>; no-map; }; @@ -69,7 +69,7 @@ qcom,client-id = <1>; }; - rfsa@867e00000 { + rfsa@867e0000 { reg = <0x0 0x867e0000 0x0 0x20000>; no-map; }; @@ -913,6 +913,7 @@ }; mdss: mdss@1a00000 { + status = "disabled"; compatible = "qcom,mdss"; reg = <0x01a00000 0x1000>, <0x01ac8000 0x3000>; @@ -1528,6 +1529,21 @@ status = "disabled"; }; + blsp_i2c3: i2c@78b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b7000 0x500>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c3_default>; + pinctrl-1 = <&i2c3_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + blsp_spi3: spi@78b7000 { compatible = "qcom,spi-qup-v2.2.1"; reg = <0x078b7000 0x500>; diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts index 5969b5cfdc85..23cdcc9f7c72 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts @@ -6,6 +6,8 @@ /dts-v1/; #include "msm8992.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" / { model = "LG Nexus 5X"; @@ -44,7 +46,7 @@ }; &rpm_requests { - pm8994-regulators { + pm8994_regulators: pm8994-regulators { compatible = "qcom,rpm-pm8994-regulators"; vdd_l1-supply = <&pm8994_s1>; @@ -53,15 +55,17 @@ vdd_l4_27_31-supply = <&pm8994_s3>; vdd_l5_7-supply = <&pm8994_s3>; vdd_l6_12_32-supply = <&pm8994_s5>; - vdd_l8_16_30-supply = <&vreg_vph_pwr>; - vdd_l9_10_18_22-supply = <&vreg_vph_pwr>; - vdd_l13_19_23_24-supply = <&vreg_vph_pwr>; + vdd_l8_16_30-supply = <&vph_pwr>; + vdd_l9_10_18_22-supply = <&vph_pwr>; + vdd_l13_19_23_24-supply = <&vph_pwr>; vdd_l14_15-supply = <&pm8994_s5>; - vdd_l17_29-supply = <&vreg_vph_pwr>; - vdd_l20_21-supply = <&vreg_vph_pwr>; + vdd_l17_29-supply = <&vph_pwr>; + vdd_l20_21-supply = <&vph_pwr>; vdd_l25-supply = <&pm8994_s5>; vdd_lvs1_2 = <&pm8994_s4>; + /* S1, S2, S6 and S12 are managed by RPMPD */ + pm8994_s1: s1 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <800000>; @@ -93,6 +97,8 @@ regulator-max-microvolt = <1000000>; }; + /* S8, S9, S10 and S11 - SPMI-managed VDD_APC */ + pm8994_l1: l1 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; @@ -113,18 +119,14 @@ regulator-max-microvolt = <1225000>; }; - pm8994_l5: l5 { - /* TODO */ - }; + /* L5 is inaccessible from RPM */ pm8994_l6: l6 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - pm8994_l7: l7 { - /* TODO */ - }; + /* L7 is inaccessible from RPM */ pm8994_l8: l8 { regulator-min-microvolt = <1800000>; @@ -266,9 +268,22 @@ */ }; }; + + pmi8994_regulators: pmi8994-regulators { + compatible = "qcom,rpm-pmi8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + pmi8994_s1: s1 {}; + + /* S2 & S3 - VDD_GFX */ + + pmi8994_bby: boost-bypass {}; + }; }; -&sdhc_1 { +&sdhc1 { status = "okay"; mmc-hs400-1_8v; diff --git a/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts new file mode 100644 index 000000000000..5322b9ce5839 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org> + * Copyright (c) 2020, Gustave Monce <gustave.monce@outlook.com> + */ + +/dts-v1/; + +#include "msm8992.dtsi" +#include "msm8994-msft-lumia-octagon.dtsi" + +/ { + model = "Microsoft Lumia 950"; + compatible = "microsoft,talkman", "qcom,msm8992"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts deleted file mode 100644 index c337a86a5c77..000000000000 --- a/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts +++ /dev/null @@ -1,67 +0,0 @@ -// SPDX-License-Identifier: BSD-3-Clause -/* - * Copyright (c) 2020, Konrad Dybcio - */ - -/dts-v1/; - -#include "msm8992.dtsi" -#include "pm8994.dtsi" -#include "pmi8994.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/gpio-keys.h> - -/ { - model = "Microsoft Lumia 950"; - compatible = "microsoft,talkman", "qcom,msm8992"; - - /* Most Lumia 950 users use GRUB to load their kernels, - * hence there is no need for msm-id and friends. - */ - - /* This enables graphical output via bootloader-enabled display. - * acpi=no is required due to WP platforms having ACPI support, but - * only for Windows-based OSes. - */ - chosen { - bootargs = "earlycon=efifb console=efifb acpi=no"; - - #address-cells = <2>; - #size-cells = <2>; - ranges; - }; -}; - -&blsp_i2c1 { - status = "okay"; - - rmi4-i2c-dev@4b { - compatible = "syna,rmi4-i2c"; - reg = <0x4b>; - #address-cells = <1>; - #size-cells = <0>; - - interrupt-parent = <&tlmm>; - interrupts = <77 IRQ_TYPE_EDGE_FALLING>; - - rmi4-f01@1 { - reg = <0x01>; - syna,nosleep-mode = <1>; - }; - - rmi4-f12@12 { - reg = <0x12>; - syna,sensor-type = <1>; - syna,clip-x-low = <0>; - syna,clip-x-high = <1440>; - syna,clip-y-low = <0>; - syna,clip-y-high = <2560>; - }; - }; -}; - -&sdhc_1 { - status = "okay"; - - mmc-hs200-1_8v; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts index 4f64ca3ea1ef..357d55496e75 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts @@ -70,21 +70,6 @@ pmsg-size = <0x20000>; }; - continuous_splash: framebuffer@3401000{ - reg = <0x0 0x3401000 0x0 0x2200000>; - no-map; - }; - - dfps_data_mem: dfps_data_mem@3400000 { - reg = <0x0 0x3400000 0x0 0x1000>; - no-map; - }; - - peripheral_region: peripheral_region@7400000 { - reg = <0x0 0x7400000 0x0 0x1c00000>; - no-map; - }; - modem_region: modem_region@9000000 { reg = <0x0 0x9000000 0x0 0x5a00000>; no-map; @@ -97,43 +82,49 @@ }; }; -&blsp_i2c2 { +&blsp1_i2c2 { status = "okay"; /* Atmel or Synaptics touchscreen */ }; -&blsp_i2c5 { +&blsp1_i2c5 { status = "okay"; - /* Silabs si4705 FM transmitter */ + /* ST lsm6db0 gyro/accelerometer */ }; -&blsp_i2c6 { +&blsp1_i2c6 { status = "okay"; - /* NCI NFC, + /* + * NXP NCI NFC, * TI USB320 Type-C controller, * Pericom 30216a USB (de)mux switch */ }; -&blsp_i2c7 { +&blsp2_i2c1 { status = "okay"; /* cm36686 proximity and ambient light sensor */ }; -&blsp_i2c13 { +&blsp2_i2c5 { status = "okay"; - /* ST lsm6db0 gyro/accelerometer */ + /* Silabs si4705 FM transmitter */ }; &blsp2_uart2 { status = "okay"; }; +&peripheral_region { + reg = <0x0 0x7400000 0x0 0x1c00000>; + no-map; +}; + &rpm_requests { pm8994-regulators { compatible = "qcom,rpm-pm8994-regulators"; @@ -144,24 +135,16 @@ vdd_l4_27_31-supply = <&pm8994_s3>; vdd_l5_7-supply = <&pm8994_s3>; vdd_l6_12_32-supply = <&pm8994_s5>; - vdd_l8_16_30-supply = <&vreg_vph_pwr>; - vdd_l9_10_18_22-supply = <&vreg_vph_pwr>; - vdd_l13_19_23_24-supply = <&vreg_vph_pwr>; + vdd_l8_16_30-supply = <&vph_pwr>; + vdd_l9_10_18_22-supply = <&vph_pwr>; + vdd_l13_19_23_24-supply = <&vph_pwr>; vdd_l14_15-supply = <&pm8994_s5>; - vdd_l17_29-supply = <&vreg_vph_pwr>; - vdd_l20_21-supply = <&vreg_vph_pwr>; + vdd_l17_29-supply = <&vph_pwr>; + vdd_l20_21-supply = <&vph_pwr>; vdd_l25-supply = <&pm8994_s5>; vdd_lvs1_2 = <&pm8994_s4>; - pm8994_s1: s1 { - /* unused */ - status = "disabled"; - }; - - pm8994_s2: s2 { - /* unused */ - status = "disabled"; - }; + /* S1, S2, S6 and S12 are managed by RPMPD */ pm8994_s3: s3 { regulator-min-microvolt = <1300000>; @@ -186,6 +169,8 @@ regulator-max-microvolt = <1000000>; }; + /* S8, S9, S10 and S11 - SPMI-managed VDD_APC */ + pm8994_l1: l1 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; @@ -206,20 +191,14 @@ regulator-max-microvolt = <1225000>; }; - pm8994_l5: l5 { - /* unused */ - status = "disabled"; - }; + /* L5 is inaccessible from RPM */ pm8994_l6: l6 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - pm8994_l7: l7 { - /* unused */ - status = "disabled"; - }; + /* L7 is inaccessible from RPM */ pm8994_l8: l8 { regulator-min-microvolt = <1800000>; @@ -352,10 +331,31 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + + pm8994_lvs1: lvs1 {}; + pm8994_lvs2: lvs2 {}; + }; + + pmi8994_regulators: pmi8994-regulators { + compatible = "qcom,rpm-pmi8994-regulators"; + vdd_s1-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + pmi8994_s1: s1 { + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + + /* S2 & S3 - VDD_GFX */ + + pmi8994_bby: boost-bypass { + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3600000>; + }; }; }; -&sdhc_1 { +&sdhc1 { status = "okay"; mmc-hs400-1_8v; diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi index 0c422af47917..58fe58cc7703 100644 --- a/arch/arm64/boot/dts/qcom/msm8992.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi @@ -2,738 +2,29 @@ /* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. */ -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/clock/qcom,gcc-msm8994.h> +#include "msm8994.dtsi" -/ { - interrupt-parent = <&intc>; +/* 8992 only features 2 A57 cores. */ +/delete-node/ &CPU6; +/delete-node/ &CPU7; +/delete-node/ &cpu6_map; +/delete-node/ &cpu7_map; - #address-cells = <2>; - #size-cells = <2>; - - chosen { }; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - CPU0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x0>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - L2_0: l2-cache { - compatible = "cache"; - cache-level = <2>; - }; - }; - - CPU1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x1>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - CPU2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x2>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - CPU3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x3>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - CPU4: cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x100>; - next-level-cache = <&L2_1>; - enable-method = "psci"; - L2_1: l2-cache { - compatible = "cache"; - cache-level = <2>; - }; - }; - - CPU5: cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x101>; - next-level-cache = <&L2_1>; - enable-method = "psci"; - }; - - cpu-map { - cluster0 { - core0 { - cpu = <&CPU0>; - }; - - core1 { - cpu = <&CPU1>; - }; - - core2 { - cpu = <&CPU2>; - }; - - core3 { - cpu = <&CPU3>; - }; - }; - - cluster1 { - core0 { - cpu = <&CPU4>; - }; - - core1 { - cpu = <&CPU5>; - }; - }; - }; - }; - - clocks { - xo_board: xo_board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <19200000>; - }; - - sleep_clk: sleep_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; - - firmware { - scm { - compatible = "qcom,scm-msm8994", "qcom,scm"; - }; - }; - - memory { - device_type = "memory"; - /* We expect the bootloader to fill in the reg */ - reg = <0 0 0 0>; - }; - - pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>; - }; - - psci { - compatible = "arm,psci-0.2"; - method = "hvc"; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - smem_region: smem@6a00000 { - reg = <0x0 0x6a00000 0x0 0x200000>; - no-map; - }; - }; - - sfpb_mutex: hwmutex { - compatible = "qcom,sfpb-mutex"; - syscon = <&sfpb_mutex_regs 0x0 0x100>; - #hwlock-cells = <1>; - }; - - smem { - compatible = "qcom,smem"; - memory-region = <&smem_region>; - qcom,rpm-msg-ram = <&rpm_msg_ram>; - hwlocks = <&sfpb_mutex 3>; - }; - - soc { - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0 0xffffffff>; - compatible = "simple-bus"; - - intc: interrupt-controller@f9000000 { - compatible = "qcom,msm-qgic2"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0xf9000000 0x1000>, - <0xf9002000 0x1000>; - }; - - apcs: mailbox@f900d000 { - compatible = "qcom,msm8994-apcs-kpss-global", "syscon"; - reg = <0xf900d000 0x2000>; - #mbox-cells = <1>; - }; - - timer@f9020000 { - #address-cells = <1>; - #size-cells = <1>; - ranges; - compatible = "arm,armv7-timer-mem"; - reg = <0xf9020000 0x1000>; - - frame@f9021000 { - frame-number = <0>; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xf9021000 0x1000>, - <0xf9022000 0x1000>; - }; - - frame@f9023000 { - frame-number = <1>; - interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xf9023000 0x1000>; - status = "disabled"; - }; - - frame@f9024000 { - frame-number = <2>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xf9024000 0x1000>; - status = "disabled"; - }; - - frame@f9025000 { - frame-number = <3>; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xf9025000 0x1000>; - status = "disabled"; - }; - - frame@f9026000 { - frame-number = <4>; - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xf9026000 0x1000>; - status = "disabled"; - }; - - frame@f9027000 { - frame-number = <5>; - interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xf9027000 0x1000>; - status = "disabled"; - }; - - frame@f9028000 { - frame-number = <6>; - interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xf9028000 0x1000>; - status = "disabled"; - }; - }; - - usb3: usb@f92f8800 { - compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; - reg = <0xf92f8800 0x400>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - clocks = <&gcc GCC_USB30_MASTER_CLK>, - <&gcc GCC_SYS_NOC_USB3_AXI_CLK>, - <&gcc GCC_USB30_SLEEP_CLK>, - <&gcc GCC_USB30_MOCK_UTMI_CLK>; - clock-names = "core", "iface", "sleep", "mock_utmi", "ref", "xo"; - - assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_MASTER_CLK>; - assigned-clock-rates = <19200000>, <120000000>; - - power-domains = <&gcc USB30_GDSC>; - qcom,select-utmi-as-pipe-clk; - - dwc3@f9200000 { - compatible = "snps,dwc3"; - reg = <0xf9200000 0xcc00>; - interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>; - snps,dis_u2_susphy_quirk; - snps,dis_enblslpm_quirk; - maximum-speed = "high-speed"; - dr_mode = "peripheral"; - }; - }; - - sdhc_1: sdhci@f9824900 { - compatible = "qcom,sdhci-msm-v4"; - reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>; - reg-names = "hc_mem", "core_mem"; - - interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hc_irq", "pwr_irq"; - - clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, - <&xo_board>; - clock-names = "core", "iface", "xo"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on - &sdc1_rclk_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off - &sdc1_rclk_off>; - - regulator-always-on; - bus-width = <8>; - non-removable; - - status = "disabled"; - }; - - sdhc_2: sdhci@f98a4900 { - compatible = "qcom,sdhci-msm-v4"; - reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; - reg-names = "hc_mem", "core_mem"; - - interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hc_irq", "pwr_irq"; - - clocks = <&gcc GCC_SDCC2_APPS_CLK>, - <&gcc GCC_SDCC2_AHB_CLK>, - <&xo_board>; - clock-names = "core", "iface", "xo"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; - - cd-gpios = <&tlmm 100 0>; - bus-width = <4>; - status = "disabled"; - }; - - blsp1_uart2: serial@f991e000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0xf991e000 0x1000>; - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>; - clock-names = "core", "iface"; - clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_uart2_default>; - pinctrl-1 = <&blsp1_uart2_sleep>; - status = "disabled"; - }; - - blsp_i2c1: i2c@f9923000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0xf9923000 0x500>; - interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; - clock-names = "iface", "core"; - clock-frequency = <400000>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c1_default>; - pinctrl-1 = <&i2c1_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp_i2c2: i2c@f9924000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0xf9924000 0x500>; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; - clock-names = "iface", "core"; - clock-frequency = <400000>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c2_default>; - pinctrl-1 = <&i2c2_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - /* Somebody was very creative with their numbering scheme downstream... */ - - blsp_i2c13: i2c@f9927000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0xf9927000 0x500>; - interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; - clock-names = "iface", "core"; - clock-frequency = <400000>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c13_default>; - pinctrl-1 = <&i2c13_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp_i2c6: i2c@f9928000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0xf9928000 0x500>; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; - clock-names = "iface", "core"; - clock-frequency = <400000>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c6_default>; - pinctrl-1 = <&i2c6_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp2_uart2: serial@f995e000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0xf995e000 0x1000>; - interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_LOW>; - clock-names = "core", "iface"; - clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, - <&gcc GCC_BLSP2_AHB_CLK>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart2_default>; - pinctrl-1 = <&blsp2_uart2_sleep>; - status = "disabled"; - }; - - blsp_i2c7: i2c@f9963000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0xf9963000 0x500>; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>; - clock-names = "iface", "core"; - clock-frequency = <400000>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c7_default>; - pinctrl-1 = <&i2c7_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp_i2c5: i2c@f9967000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0xf9967000 0x500>; - interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>; - clock-names = "iface", "core"; - clock-frequency = <100000>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c5_default>; - pinctrl-1 = <&i2c5_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - gcc: clock-controller@fc400000 { - compatible = "qcom,gcc-msm8994"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - reg = <0xfc400000 0x2000>; - }; - - rpm_msg_ram: memory@fc428000 { - compatible = "qcom,rpm-msg-ram"; - reg = <0xfc428000 0x4000>; - }; - - restart@fc4ab000 { - compatible = "qcom,pshold"; - reg = <0xfc4ab000 0x4>; - }; - - spmi_bus: spmi@fc4c0000 { - compatible = "qcom,spmi-pmic-arb"; - reg = <0xfc4cf000 0x1000>, - <0xfc4cb000 0x1000>, - <0xfc4ca000 0x1000>; - reg-names = "core", "intr", "cnfg"; - interrupt-names = "periph_irq"; - interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; - qcom,ee = <0>; - qcom,channel = <0>; - #address-cells = <2>; - #size-cells = <0>; - interrupt-controller; - #interrupt-cells = <4>; - }; - - sfpb_mutex_regs: syscon@fd484000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "syscon"; - reg = <0xfd484000 0x400>; - }; - - tlmm: pinctrl@fd510000 { - compatible = "qcom,msm8994-pinctrl"; - reg = <0xfd510000 0x4000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - gpio-ranges = <&tlmm 0 0 146>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - - blsp1_uart2_default: blsp1-uart2-default { - function = "blsp_uart2"; - pins = "gpio4", "gpio5"; - drive-strength = <16>; - bias-disable; - }; - - blsp1_uart2_sleep: blsp1-uart2-sleep { - function = "gpio"; - pins = "gpio4", "gpio5"; - drive-strength = <2>; - bias-pull-down; - }; - - blsp2_uart2_default: blsp2-uart2-default { - function = "blsp_uart8"; - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - drive-strength = <16>; - bias-disable; - }; - - blsp2_uart2_sleep: blsp2-uart2-sleep { - function = "gpio"; - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - drive-strength = <2>; - bias-pull-down; - }; - - sdc1_clk_on: clk-on { - pins = "sdc1_clk"; - bias-disable; - drive-strength = <6>; - }; - - sdc1_clk_off: clk-off { - pins = "sdc1_clk"; - bias-disable; - drive-strength = <2>; - }; - - sdc1_cmd_on: cmd-on { - pins = "sdc1_cmd"; - bias-pull-up; - drive-strength = <6>; - }; - - sdc1_cmd_off: cmd-off { - pins = "sdc1_cmd"; - bias-pull-up; - drive-strength = <2>; - }; - - sdc1_data_on: data-on { - pins = "sdc1_data"; - bias-pull-up; - drive-strength = <6>; - }; - - sdc1_data_off: data-off { - pins = "sdc1_data"; - bias-pull-up; - drive-strength = <2>; - }; - - sdc1_rclk_on: rclk-on { - pins = "sdc1_rclk"; - bias-pull-down; - }; - - sdc1_rclk_off: rclk-off { - pins = "sdc1_rclk"; - bias-pull-down; - }; - - i2c1_default: i2c1-default { - function = "blsp_i2c1"; - pins = "gpio2", "gpio3"; - drive-strength = <2>; - bias-disable; - }; - - i2c1_sleep: i2c1-sleep { - function = "gpio"; - pins = "gpio2", "gpio3"; - drive-strength = <2>; - bias-disable; - }; - - i2c2_default: i2c2-default { - function = "blsp_i2c2"; - pins = "gpio6", "gpio7"; - drive-strength = <2>; - bias-disable; - }; - - i2c2_sleep: i2c2-sleep { - function = "gpio"; - pins = "gpio6", "gpio7"; - drive-strength = <2>; - bias-disable; - }; - - i2c5_default: i2c5-default { - /* Don't be fooled! Nobody knows the reason why though... */ - function = "blsp_i2c11"; - pins = "gpio83", "gpio84"; - drive-strength = <2>; - bias-disable; - }; - - i2c5_sleep: i2c5-sleep { - function = "gpio"; - pins = "gpio83", "gpio84"; - drive-strength = <2>; - bias-disable; - }; - - i2c6_default: i2c6-default { - function = "blsp_i2c6"; - pins = "gpio28", "gpio27"; - drive-strength = <2>; - bias-disable; - }; - - i2c6_sleep: i2c6-sleep { - function = "gpio"; - pins = "gpio28", "gpio27"; - drive-strength = <2>; - bias-disable; - }; - - i2c7_default: i2c7-default { - function = "blsp_i2c7"; - pins = "gpio43", "gpio44"; - drive-strength = <2>; - bias-disable; - }; - - i2c7_sleep: i2c7-sleep { - function = "gpio"; - pins = "gpio43", "gpio44"; - drive-strength = <2>; - bias-disable; - }; - - i2c13_default: i2c13-default { - /* Not a typo either. */ - function = "blsp_i2c5"; - pins = "gpio23", "gpio24"; - drive-strength = <2>; - bias-disable; - }; - - i2c13_sleep: i2c13-sleep { - function = "gpio"; - pins = "gpio23", "gpio24"; - drive-strength = <2>; - bias-disable; - }; - - sdc2_clk_on: sdc2-clk-on { - pins = "sdc2_clk"; - bias-disable; - drive-strength = <16>; - }; - - sdc2_clk_off: sdc2-clk-off { - pins = "sdc2_clk"; - bias-disable; - drive-strength = <2>; - }; - - sdc2_cmd_on: sdc2-cmd-on { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <10>; - }; - - sdc2_cmd_off: sdc2-cmd-off { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <2>; - }; - - sdc2_data_on: sdc2-data-on { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <10>; - }; - - sdc2_data_off: sdc2-data-off { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <2>; - }; - }; - }; - - smd_rpm: smd { - compatible = "qcom,smd"; - rpm { - interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 0>; - qcom,smd-edge = <15>; - qcom,local-pid = <0>; - qcom,remote-pid = <6>; - - rpm_requests: rpm-requests { - compatible = "qcom,rpm-msm8994"; - qcom,smd-channels = "rpm_requests"; +&rpmcc { + compatible = "qcom,rpmcc-msm8992"; +}; - rpmcc: rpmcc { - compatible = "qcom,rpmcc-msm8992"; - #clock-cells = <1>; - }; - }; - }; - }; +&tcsr_mutex { + compatible = "qcom,sfpb-mutex"; +}; - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, +&timer { + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - }; - - vreg_vph_pwr: vreg-vph-pwr { - compatible = "regulator-fixed"; - status = "okay"; - regulator-name = "vph-pwr"; - - regulator-min-microvolt = <3600000>; - regulator-max-microvolt = <3600000>; - - regulator-always-on; - }; }; +&tlmm { + compatible = "qcom,msm8992-pinctrl"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-cityman.dts b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-cityman.dts deleted file mode 100644 index ed9034b96013..000000000000 --- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-cityman.dts +++ /dev/null @@ -1,73 +0,0 @@ -// SPDX-License-Identifier: BSD-3-Clause -/* - * Copyright (c) 2020, Konrad Dybcio - */ - -/dts-v1/; - -#include "msm8994.dtsi" -#include "pm8994.dtsi" -#include "pmi8994.dtsi" - -/ { - model = "Microsoft Lumia 950 XL"; - compatible = "microsoft,cityman", "qcom,msm8994"; - - /* - * Most Lumia 950XL users use GRUB to load their kernels, - * hence there is no need for msm-id and friends. - */ - - /* - * This enables graphical output via bootloader-enabled display. - * acpi=no is required due to WP platforms having ACPI support, but - * only for Windows-based OSes. - */ - chosen { - bootargs = "earlycon=efifb console=efifb acpi=no"; - - #address-cells = <2>; - #size-cells = <2>; - ranges; - }; -}; - -&blsp_i2c1 { - status = "okay"; - - rmi4-i2c-dev@4b { - compatible = "syna,rmi4-i2c"; - reg = <0x4b>; - #address-cells = <1>; - #size-cells = <0>; - - interrupt-parent = <&tlmm>; - interrupts = <77 IRQ_TYPE_EDGE_FALLING>; - - rmi4-f01@1 { - reg = <0x01>; - syna,nosleep-mode = <1>; - }; - - rmi4-f12@12 { - reg = <0x12>; - syna,sensor-type = <1>; - syna,clip-x-low = <0>; - syna,clip-x-high = <1440>; - syna,clip-y-low = <0>; - syna,clip-y-high = <2660>; - }; - }; -}; - -&blsp1_uart2 { - status = "okay"; -}; - -&blsp2_uart2 { - status = "okay"; -}; - -&sdhc1 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts new file mode 100644 index 000000000000..d0aaf5750c21 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org> + * Copyright (c) 2020, Gustave Monce <gustave.monce@outlook.com> + */ + +/dts-v1/; + +#include "msm8994.dtsi" +#include "msm8994-msft-lumia-octagon.dtsi" + +/ { + model = "Microsoft Lumia 950 XL"; + compatible = "microsoft,cityman", "qcom,msm8994"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi new file mode 100644 index 000000000000..3a3790a52a2c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi @@ -0,0 +1,909 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Common Board Device Tree for + * Microsoft Mobile MSM8994 Octagon Platforms + * + * Copyright (c) 2020, Konrad Dybcio + * Copyright (c) 2020, Gustave Monce <gustave.monce@outlook.com> + */ + +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/* + * Delete all generic (msm8994.dtsi) reserved + * memory mappings which are different in this device. + */ +/delete-node/ &adsp_mem; +/delete-node/ &audio_mem; +/delete-node/ &cont_splash_mem; +/delete-node/ &mba_mem; +/delete-node/ &mpss_mem; +/delete-node/ &peripheral_region; +/delete-node/ &rmtfs_mem; +/delete-node/ &smem_mem; + +/ { + /* + * Most Lumia 950/XL users use GRUB to load their kernels, + * hence there is no need for msm-id and friends. + */ + + /* + * This enables graphical output via bootloader-enabled display. + * acpi=no is required due to WP platforms having ACPI support, but + * only for Windows-based OSes. + */ + chosen { + bootargs = "earlycon=efifb console=efifb acpi=no"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + }; + + clocks { + compatible = "simple-bus"; + + divclk4: divclk4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + + clock-frequency = <32768>; + clock-output-names = "divclk4"; + + pinctrl-names = "default"; + pinctrl-0 = <&divclk4_pin_a>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + input-name = "gpio-keys"; + autorepeat; + + volupkey { + label = "Volume Up"; + gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; + debounce-interval = <15>; + }; + + camsnapkey { + label = "Camera Snapshot"; + gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA>; + wakeup-source; + debounce-interval = <15>; + }; + + camfocuskey { + label = "Camera Focus"; + gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; + debounce-interval = <15>; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&hall_front_default &hall_back_default>; + + label = "GPIO Hall Effect Sensor"; + + hall-front-sensor { + label = "Hall Effect Front Sensor"; + gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + }; + + hall-back-sensor { + label = "Hall Effect Back Sensor"; + gpios = <&tlmm 75 GPIO_ACTIVE_HIGH>; + linux,input-type = <EV_SW>; + linux,code = <SW_MACHINE_COVER>; + linux,can-disable; + }; + }; + + reserved-memory { + /* + * This device being a WP platform has a very different + * memory layout than other Android based devices. + * This memory layout is directly copied from the original + * device UEFI firmware, and adapted based on observations + * using JTAG for the Qualcomm Peripheral Image regions. + */ + + uefi_mem: memory@200000 { + reg = <0 0x200000 0 0x100000>; + no-map; + }; + + mppark_mem: memory@300000 { + reg = <0 0x300000 0 0x80000>; + no-map; + }; + + fbpt_mem: memory@380000 { + reg = <0 0x380000 0 0x1000>; + no-map; + }; + + dbg2_mem: memory@381000 { + reg = <0 0x381000 0 0x4000>; + no-map; + }; + + capsule_mem: memory@385000 { + reg = <0 0x385000 0 0x1000>; + no-map; + }; + + tpmctrl_mem: memory@386000 { + reg = <0 0x386000 0 0x3000>; + no-map; + }; + + uefiinfo_mem: memory@389000 { + reg = <0 0x389000 0 0x1000>; + no-map; + }; + + reset_mem: memory@389000 { + reg = <0 0x389000 0 0x1000>; + no-map; + }; + + resuncached_mem: memory@38e000 { + reg = <0 0x38e000 0 0x72000>; + no-map; + }; + + disp_mem: memory@400000 { + reg = <0 0x400000 0 0x800000>; + no-map; + }; + + uefistack_mem: memory@c00000 { + reg = <0 0xc00000 0 0x40000>; + no-map; + }; + + cpuvect_mem: memory@c40000 { + reg = <0 0xc40000 0 0x10000>; + no-map; + }; + + rescached_mem: memory@400000 { + reg = <0 0xc50000 0 0xb0000>; + no-map; + }; + + tzapps_mem: memory@6500000 { + reg = <0 0x6500000 0 0x500000>; + no-map; + }; + + smem_mem: memory@6a00000 { + reg = <0 0x6a00000 0 0x200000>; + no-map; + }; + + hyp_mem: memory@6c00000 { + reg = <0 0x6c00000 0 0x100000>; + no-map; + }; + + tz_mem: memory@6d00000 { + reg = <0 0x6d00000 0 0x160000>; + no-map; + }; + + rfsa_adsp_mem: memory@6e60000 { + reg = <0 0x6e60000 0 0x10000>; + no-map; + }; + + rfsa_mpss_mem: memory@6e70000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0x6e70000 0 0x10000>; + no-map; + + qcom,client-id = <1>; + }; + + /* + * Value obtained from the device original ACPI DSDT table + * MPSS_EFS / SBL + */ + mba_mem: memory@6e80000 { + reg = <0 0x6e80000 0 0x180000>; + no-map; + }; + + /* + * Peripheral Image loader region begin! + * The region reserved for pil is 0x7000000-0xef00000 + */ + + mpss_mem: memory@7000000 { + reg = <0 0x7000000 0 0x5a00000>; + no-map; + }; + + adsp_mem: memory@ca00000 { + reg = <0 0xca00000 0 0x1800000>; + no-map; + }; + + venus_mem: memory@e200000 { + reg = <0 0xe200000 0 0x500000>; + no-map; + }; + + pil_metadata_mem: memory@e700000 { + reg = <0 0xe700000 0 0x4000>; + no-map; + }; + + memory@e704000 { + reg = <0 0xe704000 0 0x7fc000>; + no-map; + }; + /* Peripheral Image loader region end */ + + cnss_mem: memory@ef00000 { + reg = <0 0xef00000 0 0x300000>; + no-map; + }; + }; +}; + +&blsp1_i2c1 { + status = "okay"; + + rmi4-i2c-dev@4b { + compatible = "syna,rmi4-i2c"; + reg = <0x4b>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&tlmm>; + interrupts = <77 IRQ_TYPE_EDGE_FALLING>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + syna,clip-x-low = <0>; + syna,clip-x-high = <1440>; + syna,clip-y-low = <0>; + syna,clip-y-high = <2560>; + }; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + /* + * This device uses the Texas Instruments TAS2553, however the TAS2552 driver + * seems to work here. In the future a proper driver might need to + * be written for this device. + */ + tas2553: tas2553@40 { + compatible = "ti,tas2552"; + reg = <0x40>; + + vbat-supply = <&vph_pwr>; + iovdd-supply = <&vreg_s4a_1p8>; + avdd-supply = <&vreg_s4a_1p8>; + + enable-gpio = <&pm8994_gpios 12 GPIO_ACTIVE_HIGH>; + }; +}; + +&blsp1_i2c5 { + status = "okay"; + + ak09912: magnetometer@c { + compatible = "asahi-kasei,ak09912"; + reg = <0xc>; + + interrupt-parent = <&tlmm>; + interrupts = <26 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&vreg_l18a_2p85>; + vid-supply = <&vreg_lvs2a_1p8>; + }; + + zpa2326: barometer@5c { + compatible = "murata,zpa2326"; + reg = <0x5c>; + + interrupt-parent = <&tlmm>; + interrupts = <74 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&vreg_lvs2a_1p8>; + }; + + mpu6050: accelerometer@68 { + compatible = "invensense,mpu6500"; + reg = <0x68>; + + interrupt-parent = <&tlmm>; + interrupts = <64 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&vreg_lvs2a_1p8>; + vddio-supply = <&vreg_lvs2a_1p8>; + }; +}; + +&blsp1_i2c6 { + status = "okay"; + + pn547: pn547@28 { + compatible = "nxp,pn544-i2c"; + + reg = <0x28>; + + interrupt-parent = <&tlmm>; + interrupts = <29 IRQ_TYPE_EDGE_RISING>; + + enable-gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_i2c1 { + status = "okay"; + + sideinteraction: ad7147_captouch@2c { + compatible = "ad,ad7147_captouch"; + reg = <0x2c>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&grip_default>; + pinctrl-1 = <&grip_sleep>; + + interrupts = <&tlmm 96 IRQ_TYPE_EDGE_FALLING>; + + button_num = <8>; + touchpad_num = <0>; + wheel_num = <0>; + slider_num = <0>; + + vcc-supply = <&vreg_l18a_2p85>; + }; + + /* + * The QPDS-T900/QPDS-T930 is a customized part built for Nokia + * by Avago. It is very similar to the Avago APDS-9930 with some + * minor differences. In the future a proper driver might need to + * be written for this device. For now this works fine. + */ + qpdst900: qpdst900@39 { + compatible = "avago,apds9930"; + reg = <0x39>; + + interrupt-parent = <&tlmm>; + interrupts = <40 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&blsp2_i2c5 { + status = "okay"; + + fm_radio: si4705@11 { + compatible = "silabs,si470x"; + reg = <0x11>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 93 GPIO_ACTIVE_HIGH>; + }; + + vreg_lpddr_1p1: fan53526a@6c { + compatible = "fcs,fan53526"; + reg = <0x6c>; + + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vph_pwr>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; /* Turning off DDR power doesn't sound good. */ + }; + + /* ANX7816 HDMI bridge (needs MDSS HDMI) */ +}; + +&blsp2_spi4 { + status = "okay"; + + /* + * This device is a Lattice UC120 USB-C PD PHY. + * It is actually a Lattice iCE40 FPGA pre-programmed by + * the device firmware with a specific bitstream + * enabling USB Type C PHY functionality. + * Communication is done via a proprietary protocol over SPI. + * + * TODO: Once a proper driver is available, replace this. + */ + uc120: ice5lp2k@0 { + compatible = "lattice,ice40-fpga-mgr"; + reg = <0>; + spi-max-frequency = <5000000>; + cdone-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pmi8994_gpios 4 GPIO_ACTIVE_LOW>; + }; +}; + +&blsp2_uart2 { + status = "okay"; + + qca6174_bt: bluetooth { + compatible = "qcom,qca6174-bt"; + + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; + clocks = <&divclk4>; + }; +}; + +&pm8994_gpios { + bt_en_gpios: bt_en_gpios { + pinconf { + pins = "gpio19"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + power-source = <PM8994_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + bias-pull-down; + }; + }; + + divclk4_pin_a: divclk4 { + pinconf { + pins = "gpio18"; + function = PMIC_GPIO_FUNC_FUNC2; + power-source = <PM8994_GPIO_S4>; + bias-disable; + }; + }; +}; + +&pm8994_pon { + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0 8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + linux,code = <KEY_POWER>; + }; + + volwnkey { + compatible = "qcom,pm8941-resin"; + interrupts = <0 8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + linux,code = <KEY_VOLUMEDOWN>; + }; +}; + +&pmi8994_gpios { + pinctrl-0 = <&hd3ss460_pol &hd3ss460_amsel &hd3ss460_en>; + pinctrl-names = "default"; + + /* + * This device uses a TI HD3SS460 Type-C MUX + * As this device has no driver currently, + * the configuration for USB Face Up is set-up here. + * + * TODO: remove once a driver is available + * TODO: add VBUS GPIO 5 + */ + hd3ss460_pol: pol_low { + pins = "gpio8"; + drive-strength = <3>; + bias-pull-down; + }; + + hd3ss460_amsel: amsel_high { + pins = "gpio9"; + drive-strength = <1>; + bias-pull-up; + }; + + hd3ss460_en: en_high { + pins = "gpio10"; + drive-strength = <1>; + bias-pull-up; + }; +}; + +&pmi8994_spmi_regulators { + vdd_gfx: s2@1700 { + reg = <0x1700 0x100>; + regulator-min-microvolt = <980000>; + regulator-max-microvolt = <980000>; + }; +}; + +&rpm_requests { + /* These values were taken from the original firmware ACPI tables */ + pm8994_regulators: pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_l1-supply = <&vreg_s1b_1p0>; + vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; + vdd_l3_l11-supply = <&vreg_s3a_1p3>; + vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; + vdd_l5_l7-supply = <&vreg_s5a_2p15>; + vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; + vdd_l8_l16_l30-supply = <&vph_pwr>; + vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>; + vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>; + vdd_l14_l15-supply = <&vreg_s5a_2p15>; + vdd_l17_l29-supply = <&vph_pwr_bbyp>; + vdd_l20_l21-supply = <&vph_pwr_bbyp>; + vdd_l25-supply = <&vreg_s5a_2p15>; + vdd_lvs1_2-supply = <&vreg_s4a_1p8>; + + /* S1, S2, S6 and S12 are managed by RPMPD */ + + vreg_s3a_1p3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-allow-set-load; + regulator-system-load = <300000>; + }; + + vreg_s4a_1p8: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-always-on; + regulator-system-load = <325000>; + }; + + vreg_s5a_2p15: s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-allow-set-load; + regulator-system-load = <325000>; + }; + + vreg_s7a_1p0: s7 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + /* + * S8 - SPMI-managed VDD_APC0 + * S9, S10 and S11 (the main one) - SPMI-managed VDD_APC1 + */ + + vreg_l1a_1p0: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l2a_1p25: l2 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-allow-set-load; + regulator-system-load = <4160>; + }; + + vreg_l3a_1p2: l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <80000>; + }; + + vreg_l4a_1p225: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + /* L5 is inaccessible from RPM */ + + vreg_l6a_1p8: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-system-load = <1000>; + }; + + /* L7 is inaccessible from RPM */ + + vreg_l8a_1p8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l11a_1p2: l11 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <35000>; + }; + + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <50000>; + }; + + vreg_l13a_2p95: l13 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <22000>; + }; + + vreg_l14a_1p8: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <52000>; + }; + + vreg_l15a_1p8: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l16a_2p7: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + vreg_l17a_2p7: l17 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <300000>; + }; + + vreg_l18a_2p85: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <600000>; + }; + + vreg_l19a_3p3: l19 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <500000>; + }; + + vreg_l20a_2p95: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + regulator-boot-on; + regulator-allow-set-load; + regulator-system-load = <570000>; + }; + + vreg_l21a_2p95: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <800000>; + }; + + vreg_l22a_3p0: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <150000>; + }; + + vreg_l23a_2p8: l23 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <80000>; + }; + + vreg_l24a_3p075: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3150000>; + regulator-allow-set-load; + regulator-system-load = <5800>; + }; + + vreg_l25a_1p1: l25 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <80000>; + }; + + vreg_l26a_1p0: l26 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l27a_1p05: l27 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <500000>; + }; + + vreg_l28a_1p0: l28 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <26000>; + }; + + vreg_l29a_2p8: l29 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <80000>; + }; + + vreg_l30a_1p8: l30 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <2500>; + }; + + vreg_l31a_1p2: l31 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <600000>; + }; + + vreg_l32a_1p8: l32 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs1a_1p8: lvs1 { }; + + vreg_lvs2a_1p8: lvs2 { }; + }; + + pmi8994_regulators: pmi8994-regulators { + compatible = "qcom,rpm-pmi8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + vreg_s1b_1p0: s1 { + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + + /* S2 & S3 - VDD_GFX */ + + vph_pwr_bbyp: boost-bypass { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; +}; + +&sdhc1 { + status = "okay"; + + /* + * This device is shipped with HS400 capabable eMMCs + * However various brands have been used in various product batches, + * including a Samsung eMMC (BGND3R) which features a quirk with HS400. + * Set the speed to HS200 as a safety measure. + */ + mmc-hs200-1_8v; +}; + +&sdhc2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + cd-gpios = <&pm8994_gpios 8 GPIO_ACTIVE_LOW>; +}; + +&tlmm { + grip_default: grip-default { + pins = "gpio39"; + function = "gpio"; + drive-strength = <6>; + bias-pull-down; + }; + + grip_sleep: grip-sleep { + pins = "gpio39"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + hall_front_default: hall-front-default { + pins = "gpio42"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + hall_back_default: hall-back-default { + pins = "gpio75"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts new file mode 100644 index 000000000000..b5e90c85aaf6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +/dts-v1/; + +#include "msm8994-sony-xperia-kitakami.dtsi" + +/ { + model = "Sony Xperia Z3+/Z4"; + compatible = "sony,ivy-row", "qcom,msm8994"; +}; + +&pm8994_l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; +}; + +&pm8994_l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; +}; + +/delete-node/ &pm8994_l19; +/delete-node/ &pm8994_l32; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts new file mode 100644 index 000000000000..a1d1a075941a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +/dts-v1/; + +#include "msm8994-sony-xperia-kitakami.dtsi" + +/ { + model = "Sony Xperia Z4 Tablet (LTE)"; + compatible = "sony,karin-row", "qcom,msm8994"; +}; + +&blsp2_i2c5 { + /* + * TI LP8557 backlight driver @ 2c + * AD AD7146 touch controller @ 2f + * sii8620 HDMI/MHL bridge @ 72 (kitakami-common) + */ +}; + +&pm8994_l3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; +}; + +&pm8994_l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; +}; + +&pm8994_l22 { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; +}; + +&pm8994_l25 { + regulator-min-microvolt = <1037500>; + regulator-max-microvolt = <1037500>; +}; + +/delete-node/ &pm8994_l32; +/* Z4 tablets use a different touchscreen. */ +/delete-node/ &touchscreen; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts new file mode 100644 index 000000000000..1385956a69f3 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +/dts-v1/; + +#include "msm8994-sony-xperia-kitakami.dtsi" + +/ { + model = "Sony Xperia Z5 Premium"; + compatible = "sony,satsuki-row", "qcom,msm8994"; +}; + +&pm8994_l14 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts index 5d6bbbf6c119..d3ba9867a369 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: BSD-3-Clause /* - * Copyright (c) 2020, Konrad Dybcio + * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org> */ /dts-v1/; @@ -11,3 +11,5 @@ model = "Sony Xperia Z5"; compatible = "sony,sumire-row", "qcom,msm8994"; }; + +/delete-node/ &pm8994_l19; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts new file mode 100644 index 000000000000..f129479bbf95 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +/dts-v1/; + +#include "msm8994-sony-xperia-kitakami.dtsi" + +/ { + model = "Sony Xperia Z5 Compact"; + compatible = "sony,suzuran-row", "qcom,msm8994"; +}; + +&pm8994_l14 { + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; +}; + +/delete-node/ &pm8994_l19; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi index 791f254ac3f8..48de66bf19c4 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: BSD-3-Clause /* - * Copyright (c) 2020, Konrad Dybcio + * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org> */ #include "msm8994.dtsi" @@ -11,8 +11,17 @@ / { /* required for bootloader to select correct board */ - qcom,msm-id = <0xcf 0x20001>; + + /* + * We support MSM8994 v2 (0x20000) and v2.1 (0x20001). + * The V1 chip (0x0 and 0x10000) is significantly different + * and requires driver-side changes (including CPR, be warned!!). + * Besides that, it's very rare. + */ + qcom,msm-id = <207 0x20000>, <207 0x20001>; + /* We only use pm8994+pmi8994. */ qcom,pmic-id = <0x10009 0x1000a 0x00 0x00>; + /* This property is shared across all kitakami devices. */ qcom,board-id = <8 0>; /* Kitakami firmware doesn't support PSCI */ @@ -63,53 +72,29 @@ }; reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - /* This is for getting crash logs using Android downstream kernels */ ramoops@1fe00000 { compatible = "ramoops"; - reg = <0x0 0x1fe00000 0x0 0x200000>; + reg = <0 0x1fe00000 0 0x200000>; console-size = <0x100000>; record-size = <0x10000>; ftrace-size = <0x10000>; pmsg-size = <0x80000>; }; - continuous_splash: framebuffer@3401000{ - reg = <0x0 0x3401000 0x0 0x2200000>; - no-map; - }; - - dfps_data_mem: dfps_data_mem@3400000 { - reg = <0x0 0x3400000 0x0 0x1000>; - no-map; - }; - - peripheral_region: peripheral_region@7400000 { - reg = <0x0 0x7400000 0x0 0x1c00000>; - no-map; - }; - - modem_region: modem_region@9000000 { - reg = <0x0 0x9000000 0x0 0x5a00000>; - no-map; - }; - - tzapp: modem_region@ea00000 { - reg = <0x0 0xea00000 0x0 0x1900000>; + fb_region: fb_region@40000000 { + reg = <0 0x40000000 0 0x1000000>; no-map; }; - fb_region: fb_region@40000000 { - reg = <0x00 0x40000000 0x00 0x1000000>; + tzapp: memory@c7800000 { + reg = <0 0xc7800000 0 0x1900000>; no-map; }; }; }; -&blsp_spi0 { +&blsp1_spi1 { status = "okay"; /* FPC fingerprint reader */ @@ -117,94 +102,330 @@ /* I2C1 is disabled on this board */ -&blsp_i2c2 { +&blsp1_i2c2 { status = "okay"; + clock-frequency = <355000>; - /* NXP NFC */ + /* NXP PN547 NFC */ }; -&blsp_i2c4 { +&blsp1_i2c4 { status = "okay"; + clock-frequency = <355000>; /* Empty but active */ }; -&blsp_i2c5 { +&blsp1_i2c6 { status = "okay"; + clock-frequency = <355000>; - /* SMB1357 charger and sii8620 HDMI/MHL bridge */ -}; + touchscreen: rmi4-i2c-dev@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + #address-cells = <1>; + #size-cells = <0>; -&blsp_i2c6 { - status = "okay"; + interrupt-parent = <&tlmm>; + interrupts = <42 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_active &ts_reset_active>; + + vdd-supply = <&pm8994_l22>; + vio-supply = <&pm8994_s4>; + + syna,reset-delay-ms = <220>; + syna,startup-delay-ms = <220>; - /* Synaptics touchscreen */ + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; + }; + }; }; &blsp1_uart2 { status = "okay"; }; +&blsp2_i2c5 { + status = "okay"; + clock-frequency = <355000>; + + /* sii8620 HDMI/MHL bridge */ +}; + &blsp2_uart2 { status = "okay"; }; +/* + * Kitakami bootloader only turns cont_splash on when it detects + * specific downstream MDSS/backlight nodes in the active DTB. + * One way to use that framebuffer is to load a secondary instance of + * LK with the downstream DTB appended and then, only from there, load + * mainline Linux. + */ +&cont_splash_mem { + reg = <0 0x3401000 0 0x2200000>; +}; + +&pmi8994_spmi_regulators { + /* + * Yeah, this one *is* managed by RPMPD, but also needs + * to be hacked up as a-o due to the GPU device only accepting a single + * power domain.. which still isn't enough and forces us to bind + * OXILI_CX and OXILI_GX together! + */ + vdd_gfx: s2@1700 { + reg = <0x1700 0x100>; + regulator-name = "VDD_GFX"; + regulator-min-microvolt = <980000>; + regulator-max-microvolt = <980000>; + + /* hack until we rig up the gpu consumer */ + regulator-always-on; + }; +}; + &rpm_requests { pm8994_regulators: pm8994-regulators { compatible = "qcom,rpm-pm8994-regulators"; - vdd_l1-supply = <&pm8994_s1>; - vdd_l2_26_28-supply = <&pm8994_s3>; - vdd_l3_11-supply = <&pm8994_s3>; - vdd_l4_27_31-supply = <&pm8994_s3>; - vdd_l5_7-supply = <&pm8994_s3>; - vdd_l6_12_32-supply = <&pm8994_s5>; - vdd_l8_16_30-supply = <&vreg_vph_pwr>; - vdd_l9_10_18_22-supply = <&vreg_vph_pwr>; - vdd_l13_19_23_24-supply = <&vreg_vph_pwr>; - vdd_l14_15-supply = <&pm8994_s5>; - vdd_l17_29-supply = <&vreg_vph_pwr>; - vdd_l20_21-supply = <&vreg_vph_pwr>; - vdd_l25-supply = <&pm8994_s5>; - vdd_lvs1_2 = <&pm8994_s4>; - - pm8994_s1: s1 {}; - pm8994_s2: s2 {}; - pm8994_s3: s3 {}; - pm8994_s4: s4 {}; - pm8994_s5: s5 {}; - pm8994_s6: s6 {}; - pm8994_s7: s7 {}; - - pm8994_l1: l1 {}; - pm8994_l2: l2 {}; - pm8994_l3: l3 {}; - pm8994_l4: l4 {}; - pm8994_l6: l6 {}; - pm8994_l8: l8 {}; - pm8994_l9: l9 {}; - pm8994_l10: l10 {}; - pm8994_l11: l11 {}; - pm8994_l12: l12 {}; - pm8994_l13: l13 {}; - pm8994_l14: l14 {}; - pm8994_l15: l15 {}; - pm8994_l16: l16 {}; - pm8994_l17: l17 {}; - pm8994_l18: l18 {}; - pm8994_l19: l19 {}; - pm8994_l20: l20 {}; - pm8994_l21: l21 {}; - pm8994_l22: l22 {}; - pm8994_l23: l23 {}; - pm8994_l24: l24 {}; - pm8994_l25: l25 {}; - pm8994_l26: l26 {}; - pm8994_l27: l27 {}; - pm8994_l28: l28 {}; - pm8994_l29: l29 {}; - pm8994_l30: l30 {}; - pm8994_l31: l31 {}; - pm8994_l32: l32 {}; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_l1-supply = <&pmi8994_s1>; + vdd_l2_l26_l28-supply = <&pm8994_s3>; + vdd_l3_l11-supply = <&pm8994_s3>; + vdd_l4_l27_l31-supply = <&pm8994_s3>; + vdd_l5_l7-supply = <&pm8994_s5>; + vdd_l6_l12_l32-supply = <&pm8994_s5>; + vdd_l8_l16_l30-supply = <&vph_pwr>; + vdd_l9_l10_l18_l22-supply = <&pmi8994_bby>; + vdd_l13_l19_l23_l24-supply = <&pmi8994_bby>; + vdd_l14_l15-supply = <&pm8994_s5>; + vdd_l17_l29-supply = <&pmi8994_bby>; + vdd_l20_l21-supply = <&pmi8994_bby>; + vdd_l25-supply = <&pm8994_s3>; + vdd_lvs1_lvs2-supply = <&pm8994_s4>; + + /* S1, S2, S6 and S12 are managed by RPMPD */ + + pm8994_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8994_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-always-on; + regulator-system-load = <325000>; + }; + + pm8994_s5: s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + pm8994_s7: s7 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + /* + * S8 - SPMI-managed VDD_APC0 + * S9, S10 and S11 (the main one) - SPMI-managed VDD_APC1 + */ + + pm8994_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l2: l2 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-allow-set-load; + regulator-system-load = <10000>; + }; + + pm8994_l3: l3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + pm8994_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + /* L5 is inaccessible from RPM */ + + pm8994_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + /* L7 is inaccessible from RPM */ + + pm8994_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l11: l11 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8994_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-system-load = <10000>; + }; + + pm8994_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8994_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-system-load = <10000>; + }; + + pm8994_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l17: l17 { + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + }; + + pm8994_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + pm8994_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8994_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + regulator-boot-on; + regulator-allow-set-load; + regulator-system-load = <570000>; + }; + + pm8994_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <800000>; + }; + + pm8994_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8994_l23: l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8994_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3150000>; + }; + + pm8994_l25: l25 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l26: l26 { + regulator-min-microvolt = <987500>; + regulator-max-microvolt = <987500>; + }; + + pm8994_l27: l27 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8994_l28: l28 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-allow-set-load; + regulator-system-load = <10000>; + }; + + pm8994_l29: l29 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l30: l30 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l31: l31 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + regulator-system-load = <10000>; + }; + + pm8994_l32: l32 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; pm8994_lvs1: lvs1 {}; pm8994_lvs2: lvs2 {}; @@ -213,22 +434,34 @@ pmi8994_regulators: pmi8994-regulators { compatible = "qcom,rpm-pmi8994-regulators"; - pmi8994_s1: s1 {}; - pmi8994_s2: s2 {}; - pmi8994_s3: s3 {}; - pmi8994_bby: boost-bypass {}; + vdd_s1-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + pmi8994_s1: s1 { + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + + /* S2 & S3 - VDD_GFX */ + + pmi8994_bby: boost-bypass { + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3600000>; + }; }; }; &sdhc1 { - /* There is an issue with the eMMC causing permanent + /* + * There is an issue with the eMMC causing permanent * damage to the card if a quirk isn't addressed. * Until it's fixed, disable the MMC so as not to brick * devices. */ status = "disabled"; - /* Downstream pushes 2.95V to the sdhci device, + /* + * Downstream pushes 2.95V to the sdhci device, * but upstream driver REALLY wants to make vmmc 1.8v * cause of the hs400-1_8v mode. MMC works fine without * that regulator, so let's not use it for now. @@ -238,3 +471,27 @@ * vqmmc-supply = <&pm8994_s4>; */ }; + +&sdhc2 { + status = "okay"; + + cd-gpios = <&tlmm 100 0>; + vmmc-supply = <&pm8994_l21>; + vqmmc-supply = <&pm8994_l13>; +}; + +&tlmm { + ts_int_active: ts-int-active { + pins = "gpio42"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + + ts_reset_active: ts-reset-active { + pins = "gpio109"; + drive-strength = <2>; + bias-disable; + output-low; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 6e083a2f690b..f49d442d2edf 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8994.h> +#include <dt-bindings/power/qcom-rpmpd.h> / { interrupt-parent = <&intc>; @@ -131,11 +132,11 @@ cpu = <&CPU5>; }; - core2 { + cpu6_map: core2 { cpu = <&CPU6>; }; - core3 { + cpu7_map: core3 { cpu = <&CPU7>; }; }; @@ -154,6 +155,12 @@ reg = <0 0 0 0>; }; + tcsr_mutex: hwlock { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_regs 0 0x80>; + #hwlock-cells = <1>; + }; + pmu { compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>; @@ -169,8 +176,51 @@ #size-cells = <2>; ranges; + dfps_data_mem: dfps_data_mem@3400000 { + reg = <0 0x03400000 0 0x1000>; + no-map; + }; + + cont_splash_mem: memory@3800000 { + reg = <0 0x03800000 0 0x2400000>; + no-map; + }; + smem_mem: smem_region@6a00000 { - reg = <0x0 0x6a00000 0x0 0x200000>; + reg = <0 0x06a00000 0 0x200000>; + no-map; + }; + + mpss_mem: memory@7000000 { + reg = <0 0x07000000 0 0x5a00000>; + no-map; + }; + + peripheral_region: memory@ca00000 { + reg = <0 0x0ca00000 0 0x1f00000>; + no-map; + }; + + rmtfs_mem: memory@c6400000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xc6400000 0 0x180000>; + no-map; + + qcom,client-id = <1>; + }; + + mba_mem: memory@c6700000 { + reg = <0 0xc6700000 0 0x100000>; + no-map; + }; + + audio_mem: memory@c7000000 { + reg = <0 0xc7000000 0 0x800000>; + no-map; + }; + + adsp_mem: memory@c9400000 { + reg = <0 0xc9400000 0 0x3f00000>; no-map; }; }; @@ -192,6 +242,35 @@ compatible = "qcom,rpmcc-msm8994"; #clock-cells = <1>; }; + + rpmpd: power-controller { + compatible = "qcom,msm8994-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = <1>; + }; + rpmpd_opp_svs_krait: opp2 { + opp-level = <2>; + }; + rpmpd_opp_svs_soc: opp3 { + opp-level = <3>; + }; + rpmpd_opp_nom: opp4 { + opp-level = <4>; + }; + rpmpd_opp_turbo: opp5 { + opp-level = <5>; + }; + rpmpd_opp_super_turbo: opp6 { + opp-level = <6>; + }; + }; + }; }; }; }; @@ -203,6 +282,55 @@ hwlocks = <&tcsr_mutex 3>; }; + smp2p-lpass { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc { #address-cells = <1>; @@ -385,7 +513,7 @@ status = "disabled"; }; - blsp_i2c1: i2c@f9923000 { + blsp1_i2c1: i2c@f9923000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9923000 0x500>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; @@ -393,6 +521,8 @@ <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; clock-names = "iface", "core"; clock-frequency = <400000>; + dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c1_default>; pinctrl-1 = <&i2c1_sleep>; @@ -401,7 +531,7 @@ status = "disabled"; }; - blsp_spi0: spi@f9923000 { + blsp1_spi1: spi@f9923000 { compatible = "qcom,spi-qup-v2.2.1"; reg = <0xf9923000 0x500>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; @@ -412,21 +542,21 @@ dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_spi0_default>; - pinctrl-1 = <&blsp1_spi0_sleep>; + pinctrl-0 = <&blsp1_spi1_default>; + pinctrl-1 = <&blsp1_spi1_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; - blsp_i2c2: i2c@f9924000 { + blsp1_i2c2: i2c@f9924000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9924000 0x500>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_AHB_CLK>, <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; clock-names = "iface", "core"; - clock-frequency = <355000>; + clock-frequency = <400000>; dmas = <&blsp1_dma 14>, <&blsp1_dma 15>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; @@ -439,14 +569,16 @@ /* I2C3 doesn't exist */ - blsp_i2c4: i2c@f9926000 { + blsp1_i2c4: i2c@f9926000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9926000 0x500>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_AHB_CLK>, <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; clock-names = "iface", "core"; - clock-frequency = <355000>; + clock-frequency = <400000>; + dmas = <&blsp1_dma 18>, <&blsp1_dma 19>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c4_default>; pinctrl-1 = <&i2c4_sleep>; @@ -455,31 +587,32 @@ status = "disabled"; }; - blsp2_dma: dma-controller@f9944000 { - compatible = "qcom,bam-v1.7.0"; - reg = <0xf9944000 0x19000>; - interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "bam_clk"; - #dma-cells = <1>; - qcom,ee = <0>; - qcom,controlled-remotely; - num-channels = <18>; - qcom,num-ees = <4>; + blsp1_i2c5: i2c@f9927000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9927000 0x500>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; + dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c5_default>; + pinctrl-1 = <&i2c5_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; - /* According to downstream kernels, i2c6 - * comes before i2c5 address-wise... - */ - - blsp_i2c6: i2c@f9928000 { + blsp1_i2c6: i2c@f9928000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9928000 0x500>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_AHB_CLK>, <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; clock-names = "iface", "core"; - clock-frequency = <355000>; + clock-frequency = <400000>; dmas = <&blsp1_dma 22>, <&blsp1_dma 23>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; @@ -490,10 +623,23 @@ status = "disabled"; }; + blsp2_dma: dma-controller@f9944000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0xf9944000 0x19000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <18>; + qcom,num-ees = <4>; + }; + blsp2_uart2: serial@f995e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf995e000 0x1000>; - interrupts = <GIC_SPI 146 IRQ_TYPE_EDGE_FALLING>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; @@ -505,7 +651,43 @@ status = "disabled"; }; - blsp_i2c5: i2c@f9967000 { + blsp2_i2c1: i2c@f9963000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9963000 0x500>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; + dmas = <&blsp2_dma 12>, <&blsp2_dma 13>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c7_default>; + pinctrl-1 = <&i2c7_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_spi4: spi@f9966000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0xf9966000 0x500>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_QUP4_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + spi-max-frequency = <19200000>; + dmas = <&blsp2_dma 18>, <&blsp2_dma 19>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_spi10_default>; + pinctrl-1 = <&blsp2_spi10_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_i2c5: i2c@f9967000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9967000 0x500>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; @@ -516,8 +698,8 @@ dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c5_default>; - pinctrl-1 = <&i2c5_sleep>; + pinctrl-0 = <&i2c11_default>; + pinctrl-1 = <&i2c11_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -588,16 +770,18 @@ blsp2_uart2_default: blsp2-uart2-default { function = "blsp_uart8"; - pins = "gpio45", "gpio46"; - drive-strength = <2>; + pins = "gpio45", "gpio46", + "gpio47", "gpio48"; + drive-strength = <16>; bias-disable; }; blsp2_uart2_sleep: blsp2-uart2-sleep { function = "gpio"; - pins = "gpio45", "gpio46"; + pins = "gpio45", "gpio46", + "gpio47", "gpio48"; drive-strength = <2>; - bias-pull-down; + bias-disable; }; i2c1_default: i2c1-default { @@ -671,7 +855,56 @@ bias-disable; }; - blsp1_spi0_default: blsp1-spi0-default { + i2c7_default: i2c7-default { + function = "blsp_i2c7"; + pins = "gpio44", "gpio43"; + drive-strength = <2>; + bias-disable; + }; + + i2c7_sleep: i2c7-sleep { + function = "gpio"; + pins = "gpio44", "gpio43"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_spi10_default: blsp2-spi10-default { + default { + function = "blsp_spi10"; + pins = "gpio53", "gpio54", "gpio55"; + drive-strength = <10>; + bias-pull-down; + }; + cs { + function = "gpio"; + pins = "gpio55"; + drive-strength = <2>; + bias-disable; + }; + }; + + blsp2_spi10_sleep: blsp2-spi10-sleep { + pins = "gpio53", "gpio54", "gpio55"; + drive-strength = <2>; + bias-disable; + }; + + i2c11_default: i2c11-default { + function = "blsp_i2c11"; + pins = "gpio83", "gpio84"; + drive-strength = <2>; + bias-disable; + }; + + i2c11_sleep: i2c11-sleep { + function = "gpio"; + pins = "gpio83", "gpio84"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_spi1_default: blsp1-spi1-default { default { function = "blsp_spi1"; pins = "gpio0", "gpio1", "gpio3"; @@ -686,7 +919,7 @@ }; }; - blsp1_spi0_sleep: blsp1-spi0-sleep { + blsp1_spi1_sleep: blsp1-spi1-sleep { pins = "gpio0", "gpio1", "gpio3"; drive-strength = <2>; bias-disable; @@ -776,13 +1009,7 @@ }; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x80>; - #hwlock-cells = <1>; - }; - - timer { + timer: timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 2 0xff08>, <GIC_PPI 3 0xff08>, @@ -790,9 +1017,9 @@ <GIC_PPI 1 0xff08>; }; - vreg_vph_pwr: vreg-vph-pwr { + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; - regulator-name = "vph-pwr"; + regulator-name = "vph_pwr"; regulator-min-microvolt = <3600000>; regulator-max-microvolt = <3600000>; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 7eef07e73e25..ce430ba9c118 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -750,6 +750,8 @@ ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>, <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>; + device_type = "pci"; + interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; @@ -802,6 +804,8 @@ ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>, <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>; + device_type = "pci"; + interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi index 00d84fb21798..b500f24d47bc 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi @@ -74,6 +74,14 @@ cpu-idle-states = <&BIG_CPU_SLEEP_1>; }; +&pcie0 { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + &pm8005_lsid1 { pm8005-regulators { compatible = "qcom,pm8005-regulators"; @@ -295,6 +303,14 @@ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; }; +&ufshc { + status = "okay"; +}; + +&ufsphy { + status = "okay"; +}; + &usb3 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi index cec42437b302..c1ef0c71d5f5 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi @@ -106,6 +106,14 @@ // status = "okay"; }; +&pcie0 { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + &pm8005_lsid1 { pm8005-regulators { compatible = "qcom,pm8005-regulators"; @@ -345,6 +353,7 @@ }; &ufshc { + status = "okay"; vcc-supply = <&vreg_l20a_2p95>; vccq-supply = <&vreg_l26a_1p2>; vccq2-supply = <&vreg_s4a_1p8>; @@ -354,6 +363,7 @@ }; &ufsphy { + status = "okay"; vdda-phy-supply = <&vreg_l1a_0p875>; vdda-pll-supply = <&vreg_l2a_1p2>; vddp-ref-clk-supply = <&vreg_l26a_1p2>; diff --git a/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi deleted file mode 100644 index 7c222cbf19d9..000000000000 --- a/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi +++ /dev/null @@ -1,108 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* Copyright (c) 2018, The Linux Foundation. All rights reserved. */ - -&tlmm { - sdc2_clk_on: sdc2_clk_on { - config { - pins = "sdc2_clk"; - bias-disable; /* NO pull */ - drive-strength = <16>; /* 16 mA */ - }; - }; - - sdc2_clk_off: sdc2_clk_off { - config { - pins = "sdc2_clk"; - bias-disable; /* NO pull */ - drive-strength = <2>; /* 2 mA */ - }; - }; - - sdc2_cmd_on: sdc2_cmd_on { - config { - pins = "sdc2_cmd"; - bias-pull-up; /* pull up */ - drive-strength = <10>; /* 10 mA */ - }; - }; - - sdc2_cmd_off: sdc2_cmd_off { - config { - pins = "sdc2_cmd"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 mA */ - }; - }; - - sdc2_data_on: sdc2_data_on { - config { - pins = "sdc2_data"; - bias-pull-up; /* pull up */ - drive-strength = <10>; /* 10 mA */ - }; - }; - - sdc2_data_off: sdc2_data_off { - config { - pins = "sdc2_data"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 mA */ - }; - }; - - sdc2_cd_on: sdc2_cd_on { - mux { - pins = "gpio95"; - function = "gpio"; - }; - - config { - pins = "gpio95"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 mA */ - }; - }; - - sdc2_cd_off: sdc2_cd_off { - mux { - pins = "gpio95"; - function = "gpio"; - }; - - config { - pins = "gpio95"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 mA */ - }; - }; - - blsp1_uart3_on: blsp1_uart3_on { - tx { - pins = "gpio45"; - function = "blsp_uart3_a"; - drive-strength = <2>; - bias-disable; - }; - - rx { - pins = "gpio46"; - function = "blsp_uart3_a"; - drive-strength = <2>; - bias-disable; - }; - - cts { - pins = "gpio47"; - function = "blsp_uart3_a"; - drive-strength = <2>; - bias-disable; - }; - - rfr { - pins = "gpio48"; - function = "blsp_uart3_a"; - drive-strength = <2>; - bias-disable; - }; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index ebdaaf1dfca4..1f2e93aa6553 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -133,6 +133,7 @@ compatible = "qcom,kryo280"; reg = <0x0 0x0>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; L2_0: l2-cache { @@ -152,6 +153,7 @@ compatible = "qcom,kryo280"; reg = <0x0 0x1>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; L1_I_1: l1-icache { @@ -167,6 +169,7 @@ compatible = "qcom,kryo280"; reg = <0x0 0x2>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; L1_I_2: l1-icache { @@ -182,6 +185,7 @@ compatible = "qcom,kryo280"; reg = <0x0 0x3>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; L1_I_3: l1-icache { @@ -197,6 +201,7 @@ compatible = "qcom,kryo280"; reg = <0x0 0x100>; enable-method = "psci"; + capacity-dmips-mhz = <1536>; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; L2_1: l2-cache { @@ -216,6 +221,7 @@ compatible = "qcom,kryo280"; reg = <0x0 0x101>; enable-method = "psci"; + capacity-dmips-mhz = <1536>; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; L1_I_101: l1-icache { @@ -231,6 +237,7 @@ compatible = "qcom,kryo280"; reg = <0x0 0x102>; enable-method = "psci"; + capacity-dmips-mhz = <1536>; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; L1_I_102: l1-icache { @@ -246,6 +253,7 @@ compatible = "qcom,kryo280"; reg = <0x0 0x103>; enable-method = "psci"; + capacity-dmips-mhz = <1536>; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; L1_I_103: l1-icache { @@ -379,43 +387,43 @@ compatible = "operating-points-v2"; rpmpd_opp_ret: opp1 { - opp-level = <16>; + opp-level = <RPM_SMD_LEVEL_RETENTION>; }; rpmpd_opp_ret_plus: opp2 { - opp-level = <32>; + opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>; }; rpmpd_opp_min_svs: opp3 { - opp-level = <48>; + opp-level = <RPM_SMD_LEVEL_MIN_SVS>; }; rpmpd_opp_low_svs: opp4 { - opp-level = <64>; + opp-level = <RPM_SMD_LEVEL_LOW_SVS>; }; rpmpd_opp_svs: opp5 { - opp-level = <128>; + opp-level = <RPM_SMD_LEVEL_SVS>; }; rpmpd_opp_svs_plus: opp6 { - opp-level = <192>; + opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; }; rpmpd_opp_nom: opp7 { - opp-level = <256>; + opp-level = <RPM_SMD_LEVEL_NOM>; }; rpmpd_opp_nom_plus: opp8 { - opp-level = <320>; + opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; }; rpmpd_opp_turbo: opp9 { - opp-level = <384>; + opp-level = <RPM_SMD_LEVEL_TURBO>; }; rpmpd_opp_turbo_plus: opp10 { - opp-level = <512>; + opp-level = <RPM_SMD_LEVEL_BINNING>; }; }; }; @@ -937,6 +945,7 @@ num-lanes = <1>; phys = <&pciephy>; phy-names = "pciephy"; + status = "disabled"; ranges = <0x01000000 0x0 0x1b200000 0x1b200000 0x0 0x100000>, <0x02000000 0x0 0x1b300000 0x1b300000 0x0 0xd00000>; @@ -962,11 +971,12 @@ perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; }; - phy@1c06000 { + pcie_phy: phy@1c06000 { compatible = "qcom,msm8998-qmp-pcie-phy"; reg = <0x01c06000 0x18c>; #address-cells = <1>; #size-cells = <1>; + status = "disabled"; ranges; clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, @@ -999,6 +1009,7 @@ phy-names = "ufsphy"; lanes-per-direction = <2>; power-domains = <&gcc UFS_GDSC>; + status = "disabled"; #reset-cells = <1>; clock-names = @@ -1038,6 +1049,7 @@ reg = <0x01da7000 0x18c>; #address-cells = <1>; #size-cells = <1>; + status = "disabled"; ranges; clock-names = @@ -1073,6 +1085,278 @@ #gpio-cells = <0x2>; interrupt-controller; #interrupt-cells = <0x2>; + + sdc2_clk_on: sdc2_clk_on { + config { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + }; + + sdc2_clk_off: sdc2_clk_off { + config { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + }; + + sdc2_cmd_on: sdc2_cmd_on { + config { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc2_cmd_off: sdc2_cmd_off { + config { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_data_on: sdc2_data_on { + config { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc2_data_off: sdc2_data_off { + config { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_cd_on: sdc2_cd_on { + mux { + pins = "gpio95"; + function = "gpio"; + }; + + config { + pins = "gpio95"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_cd_off: sdc2_cd_off { + mux { + pins = "gpio95"; + function = "gpio"; + }; + + config { + pins = "gpio95"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + blsp1_uart3_on: blsp1_uart3_on { + tx { + pins = "gpio45"; + function = "blsp_uart3_a"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio46"; + function = "blsp_uart3_a"; + drive-strength = <2>; + bias-disable; + }; + + cts { + pins = "gpio47"; + function = "blsp_uart3_a"; + drive-strength = <2>; + bias-disable; + }; + + rfr { + pins = "gpio48"; + function = "blsp_uart3_a"; + drive-strength = <2>; + bias-disable; + }; + }; + + blsp1_i2c1_default: blsp1-i2c1-default { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c1_sleep: blsp1-i2c1-sleep { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c2_default: blsp1-i2c2-default { + pins = "gpio32", "gpio33"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c2_sleep: blsp1-i2c2-sleep { + pins = "gpio32", "gpio33"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c3_default: blsp1-i2c3-default { + pins = "gpio47", "gpio48"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c3_sleep: blsp1-i2c3-sleep { + pins = "gpio47", "gpio48"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c4_default: blsp1-i2c4-default { + pins = "gpio10", "gpio11"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c4_sleep: blsp1-i2c4-sleep { + pins = "gpio10", "gpio11"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c5_default: blsp1-i2c5-default { + pins = "gpio87", "gpio88"; + function = "blsp_i2c5"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c5_sleep: blsp1-i2c5-sleep { + pins = "gpio87", "gpio88"; + function = "blsp_i2c5"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c6_default: blsp1-i2c6-default { + pins = "gpio43", "gpio44"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c6_sleep: blsp1-i2c6-sleep { + pins = "gpio43", "gpio44"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-pull-up; + }; + /* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */ + blsp2_i2c1_default: blsp2-i2c1-default { + pins = "gpio55", "gpio56"; + function = "blsp_i2c7"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c1_sleep: blsp2-i2c1-sleep { + pins = "gpio55", "gpio56"; + function = "blsp_i2c7"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp2_i2c2_default: blsp2-i2c2-default { + pins = "gpio6", "gpio7"; + function = "blsp_i2c8"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c2_sleep: blsp2-i2c2-sleep { + pins = "gpio6", "gpio7"; + function = "blsp_i2c8"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp2_i2c3_default: blsp2-i2c3-default { + pins = "gpio51", "gpio52"; + function = "blsp_i2c9"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c3_sleep: blsp2-i2c3-sleep { + pins = "gpio51", "gpio52"; + function = "blsp_i2c9"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp2_i2c4_default: blsp2-i2c4-default { + pins = "gpio67", "gpio68"; + function = "blsp_i2c10"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c4_sleep: blsp2-i2c4-sleep { + pins = "gpio67", "gpio68"; + function = "blsp_i2c10"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp2_i2c5_default: blsp2-i2c5-default { + pins = "gpio60", "gpio61"; + function = "blsp_i2c11"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c5_sleep: blsp2-i2c5-sleep { + pins = "gpio60", "gpio61"; + function = "blsp_i2c11"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp2_i2c6_default: blsp2-i2c6-default { + pins = "gpio83", "gpio84"; + function = "blsp_i2c12"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c6_sleep: blsp2-i2c6-sleep { + pins = "gpio83", "gpio84"; + function = "blsp_i2c12"; + drive-strength = <2>; + bias-pull-up; + }; }; remoteproc_mss: remoteproc@4080000 { @@ -1789,6 +2073,11 @@ clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp1_dma 6>, <&blsp1_dma 7>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c1_default>; + pinctrl-1 = <&blsp1_i2c1_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1804,6 +2093,11 @@ clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp1_dma 8>, <&blsp1_dma 9>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c2_default>; + pinctrl-1 = <&blsp1_i2c2_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1819,6 +2113,11 @@ clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp1_dma 10>, <&blsp1_dma 11>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c3_default>; + pinctrl-1 = <&blsp1_i2c3_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1834,6 +2133,11 @@ clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c4_default>; + pinctrl-1 = <&blsp1_i2c4_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1849,6 +2153,11 @@ clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp1_dma 14>, <&blsp1_dma 15>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c5_default>; + pinctrl-1 = <&blsp1_i2c5_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1864,6 +2173,11 @@ clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp1_dma 16>, <&blsp1_dma 17>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c6_default>; + pinctrl-1 = <&blsp1_i2c6_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1871,6 +2185,19 @@ #size-cells = <0>; }; + blsp2_dma: dma@c184000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x0c184000 0x25000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <18>; + qcom,num-ees = <4>; + }; + blsp2_uart1: serial@c1b0000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x0c1b0000 0x1000>; @@ -1881,7 +2208,7 @@ status = "disabled"; }; - blsp2_i2c0: i2c@c1b5000 { + blsp2_i2c1: i2c@c1b5000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x0c1b5000 0x600>; interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; @@ -1889,6 +2216,11 @@ clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp2_dma 6>, <&blsp2_dma 7>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c1_default>; + pinctrl-1 = <&blsp2_i2c1_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1896,7 +2228,7 @@ #size-cells = <0>; }; - blsp2_i2c1: i2c@c1b6000 { + blsp2_i2c2: i2c@c1b6000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x0c1b6000 0x600>; interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; @@ -1904,6 +2236,11 @@ clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp2_dma 8>, <&blsp2_dma 9>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c2_default>; + pinctrl-1 = <&blsp2_i2c2_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1911,7 +2248,7 @@ #size-cells = <0>; }; - blsp2_i2c2: i2c@c1b7000 { + blsp2_i2c3: i2c@c1b7000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x0c1b7000 0x600>; interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; @@ -1919,6 +2256,11 @@ clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp2_dma 10>, <&blsp2_dma 11>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c3_default>; + pinctrl-1 = <&blsp2_i2c3_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1926,7 +2268,7 @@ #size-cells = <0>; }; - blsp2_i2c3: i2c@c1b8000 { + blsp2_i2c4: i2c@c1b8000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x0c1b8000 0x600>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; @@ -1934,6 +2276,11 @@ clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp2_dma 12>, <&blsp2_dma 13>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c4_default>; + pinctrl-1 = <&blsp2_i2c4_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1941,7 +2288,7 @@ #size-cells = <0>; }; - blsp2_i2c4: i2c@c1b9000 { + blsp2_i2c5: i2c@c1b9000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x0c1b9000 0x600>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; @@ -1949,6 +2296,11 @@ clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp2_dma 14>, <&blsp2_dma 15>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c5_default>; + pinctrl-1 = <&blsp2_i2c5_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1956,7 +2308,7 @@ #size-cells = <0>; }; - blsp2_i2c5: i2c@c1ba000 { + blsp2_i2c6: i2c@c1ba000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x0c1ba000 0x600>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; @@ -1964,6 +2316,11 @@ clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp2_dma 16>, <&blsp2_dma 17>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c6_default>; + pinctrl-1 = <&blsp2_i2c6_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -2110,5 +2467,3 @@ }; }; }; - -#include "msm8998-pins.dtsi" diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi index a53eccf2b695..bdc76d504b78 100644 --- a/arch/arm64/boot/dts/qcom/pm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi @@ -11,7 +11,7 @@ / { thermal-zones { - pm8150 { + pm8150-thermal { polling-delay-passive = <100>; polling-delay = <0>; @@ -97,6 +97,16 @@ }; }; + pm8150_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + pm8150_rtc: rtc@6000 { compatible = "qcom,pm8941-rtc"; reg = <0x6000>; diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi index e112e8876db6..b21e56a46145 100644 --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi @@ -10,7 +10,7 @@ / { thermal-zones { - pm8150b { + pm8150b-thermal { polling-delay-passive = <100>; polling-delay = <0>; @@ -95,6 +95,16 @@ }; }; + pm8150b_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + pm8150b_gpios: gpio@c000 { compatible = "qcom,pm8150b-gpio"; reg = <0xc000>; diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi index 62139538b7d9..52f094a2b713 100644 --- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi @@ -10,7 +10,7 @@ / { thermal-zones { - pm8150l { + pm8150l-thermal { polling-delay-passive = <100>; polling-delay = <0>; @@ -89,6 +89,16 @@ }; }; + pm8150l_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + pm8150l_gpios: gpio@c000 { compatible = "qcom,pm8150l-gpio"; reg = <0xc000>; diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi index 5ffdf37d8e31..c3876c82c874 100644 --- a/arch/arm64/boot/dts/qcom/pm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi @@ -6,7 +6,7 @@ / { thermal-zones { - pm8994 { + pm8994-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -43,7 +43,7 @@ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; - pon@800 { + pm8994_pon: pon@800 { compatible = "qcom,pm8916-pon"; reg = <0x800>; diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi index 67283d60e2ac..6f5bb6b37ec2 100644 --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -9,7 +9,7 @@ / { thermal-zones { - pm8998 { + pm8998-thermal { polling-delay-passive = <250>; polling-delay = <1000>; diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi index d016b12967eb..d230c510d4b7 100644 --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi @@ -30,11 +30,15 @@ compatible = "qcom,pmi8998-lab-ibb"; ibb: ibb { - interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>; + interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>, + <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "sc-err", "ocp"; }; lab: lab { - interrupts = <0x3 0xde 0x0 IRQ_TYPE_EDGE_RISING>; + interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>, + <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "sc-err", "ocp"; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi index ff4005186895..172be177fc8f 100644 --- a/arch/arm64/boot/dts/qcom/pms405.dtsi +++ b/arch/arm64/boot/dts/qcom/pms405.dtsi @@ -8,7 +8,7 @@ / { thermal-zones { - pms405 { + pms405-thermal { polling-delay-passive = <250>; polling-delay = <1000>; diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index ce22d4fa383e..2f0528d01299 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -7,6 +7,8 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> #include "sm8250.dtsi" #include "pm8150.dtsi" #include "pm8150b.dtsi" @@ -40,6 +42,17 @@ regulator-always-on; }; + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <<9611_out>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -66,6 +79,98 @@ }; + lt9611_1v2: lt9611-vdd12-regulator { + compatible = "regulator-fixed"; + regulator-name = "LT9611_1V2"; + + vin-supply = <&vdc_3v3>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + lt9611_3v3: lt9611-3v3 { + compatible = "regulator-fixed"; + regulator-name = "LT9611_3V3"; + + vin-supply = <&vdc_3v3>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + thermal-zones { + conn-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150b_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + pm8150l-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150l_adc_tm 1>; + + trips { + active-config0 { + temperature = <50000>; + hysteresis = <4000>; + type = "passive"; + }; + }; + }; + + skin-msm-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150l_adc_tm 0>; + + trips { + active-config0 { + temperature = <50000>; + hysteresis = <4000>; + type = "passive"; + }; + }; + }; + + wifi-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150_adc_tm 1>; + + trips { + active-config0 { + temperature = <52000>; + hysteresis = <4000>; + type = "passive"; + }; + }; + }; + + xo-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150_adc_tm 0>; + + trips { + active-config0 { + temperature = <50000>; + hysteresis = <4000>; + type = "passive"; + }; + }; + }; + }; + vbat: vbat-regulator { compatible = "regulator-fixed"; regulator-name = "VBAT"; @@ -87,7 +192,7 @@ vdc_3v3: vdc-3v3-regulator { compatible = "regulator-fixed"; regulator-name = "VDC_3V3"; - vin-supply = <&dc12v>; + vin-supply = <&vreg_l11c_3p3>; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; @@ -120,9 +225,14 @@ }; }; +&adsp { + status = "okay"; + firmware-name = "qcom/sm8250/adsp.mbn"; +}; + &apps_rsc { pm8009-rpmh-regulators { - compatible = "qcom,pm8009-rpmh-regulators"; + compatible = "qcom,pm8009-1-rpmh-regulators"; qcom,pmic-id = "f"; vdd-s1-supply = <&vph_pwr>; @@ -131,6 +241,13 @@ vdd-l5-l6-supply = <&vreg_bob>; vdd-l7-supply = <&vreg_s4a_1p8>; + vreg_s2f_0p95: smps2 { + regulator-name = "vreg_s2f_0p95"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <952000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + vreg_l1f_1p1: ldo1 { regulator-name = "vreg_l1f_1p1"; regulator-min-microvolt = <1104000>; @@ -406,6 +523,42 @@ }; }; +&cdsp { + status = "okay"; + firmware-name = "qcom/sm8250/cdsp.mbn"; +}; + +&dsi0 { + status = "okay"; + vdda-supply = <&vreg_l9a_1p2>; + +#if 0 + qcom,dual-dsi-mode; + qcom,master-dsi; +#endif + + ports { + port@1 { + endpoint { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&dsi0_phy { + status = "okay"; + vdds-supply = <&vreg_l5a_0p88>; +}; + +&gpu { + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sm8250/a650_zap.mbn"; + }; +}; + /* LS-I2C0 */ &i2c4 { status = "okay"; @@ -413,6 +566,55 @@ &i2c5 { status = "okay"; + clock-frequency = <400000>; + + lt9611_codec: hdmi-bridge@2b { + compatible = "lontium,lt9611uxc"; + reg = <0x2b>; + #sound-dai-cells = <1>; + + interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&pm8150l_gpios 5 GPIO_ACTIVE_HIGH>; + + vdd-supply = <<9611_1v2>; + vcc-supply = <<9611_3v3>; + + pinctrl-names = "default"; + pinctrl-0 = <<9611_irq_pin <9611_rst_pin>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt9611_a: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + +#if 0 + port@1 { + reg = <1>; + + lt9611_b: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; +#endif + + port@2 { + reg = <2>; + + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + + }; + }; }; /* LS-I2C1 */ @@ -420,6 +622,88 @@ status = "okay"; }; +&mdss { + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + +&pm8150_adc { + xo-therm@4c { + reg = <ADC5_XO_THERM_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + wifi-therm@4e { + reg = <ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm8150_adc_tm { + status = "okay"; + + xo-therm@0 { + reg = <0>; + io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + wifi-therm@1 { + reg = <1>; + io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pcie0 { + status = "okay"; + perst-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; +}; + +&pcie0_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-pll-supply = <&vreg_l9a_1p2>; +}; + +&pcie1 { + status = "okay"; + perst-gpio = <&tlmm 82 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; +}; + +&pcie1_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-pll-supply = <&vreg_l9a_1p2>; +}; + +&pcie2 { + status = "okay"; + perst-gpio = <&tlmm 85 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_default_state>; +}; + +&pcie2_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-pll-supply = <&vreg_l9a_1p2>; +}; + &pm8150_gpios { gpio-reserved-ranges = <1 1>, <3 2>, <7 1>; gpio-line-names = @@ -435,6 +719,25 @@ "GPIO_10_P"; /* Green LED */ }; +&pm8150b_adc { + conn-therm@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm8150b_adc_tm { + status = "okay"; + + conn-therm@0 { + reg = <0>; + io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + &pm8150b_gpios { gpio-line-names = "NC", @@ -451,6 +754,38 @@ "NC"; }; +&pm8150l_adc { + skin-msm-therm@4e { + reg = <ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + pm8150l-therm@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm8150l_adc_tm { + status = "okay"; + + skin-msm-therm@0 { + reg = <0>; + io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + pm8150l-therm@1 { + reg = <1>; + io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + &pm8150l_gpios { gpio-line-names = "NC", @@ -465,6 +800,15 @@ "PM_GPIO-B", "NC", "PM3003A_MODE"; + + lt9611_rst_pin: lt9611-rst-pin { + pins = "gpio5"; + function = "normal"; + + output-high; + input-disable; + power-source = <0>; + }; }; &pm8150_rtc { @@ -483,6 +827,35 @@ status = "okay"; }; +&q6afedai { + qi2s@16 { + reg = <16>; + qcom,sd-lines = <0 1 2 3>; + }; +}; + +/* TERT I2S Uses 1 I2S SD Lines for audio on LT9611 HDMI Bridge */ +&q6afedai { + qi2s@20 { + reg = <20>; + qcom,sd-lines = <0>; + }; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + &sdhc_2 { status = "okay"; pinctrl-names = "default"; @@ -491,12 +864,91 @@ vqmmc-supply = <&vreg_l6c_2p96>; cd-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>; bus-width = <4>; - /* there seem to be issues with HS400-1.8V mode, so disable it */ - no-1-8-v; no-sdio; no-emmc; }; +&sound { + compatible = "qcom,qrb5165-rb5-sndcard"; + pinctrl-0 = <&tert_mi2s_active>; + pinctrl-names = "default"; + model = "Qualcomm-RB5-WSA8815-Speakers-DMIC0"; + audio-routing = + "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "VA DMIC0", "vdd-micb", + "VA DMIC1", "vdd-micb", + "MM_DL1", "MultiMedia1 Playback", + "MM_DL2", "MultiMedia2 Playback", + "MultiMedia3 Capture", "MM_UL3"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + hdmi-dai-link { + link-name = "HDMI Playback"; + cpu { + sound-dai = <&q6afedai TERTIARY_MI2S_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <<9611_codec 0>; + }; + }; + + dma-dai-link { + link-name = "WSA Playback"; + cpu { + sound-dai = <&q6afedai WSA_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + cpu { + sound-dai = <&q6afedai VA_CODEC_DMA_TX_0>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&vamacro 0>; + }; + }; +}; + /* CAN */ &spi0 { status = "okay"; @@ -512,6 +964,26 @@ }; }; +&swr0 { + left_spkr: wsa8810-left{ + compatible = "sdw10217211000"; + reg = <0 3>; + powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrLeft"; + #sound-dai-cells = <0>; + }; + + right_spkr: wsa8810-right{ + compatible = "sdw10217211000"; + reg = <0 4>; + powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrRight"; + #sound-dai-cells = <0>; + }; +}; + &tlmm { gpio-reserved-ranges = <40 4>; gpio-line-names = @@ -696,6 +1168,87 @@ "HST_WLAN_UART_TX", "HST_WLAN_UART_RX"; + lt9611_irq_pin: lt9611-irq { + pins = "gpio63"; + function = "gpio"; + bias-disable; + }; + + pcie0_default_state: pcie0-default { + clkreq { + pins = "gpio80"; + function = "pci_e0"; + bias-pull-up; + }; + + reset-n { + pins = "gpio79"; + function = "gpio"; + + drive-strength = <2>; + output-low; + bias-pull-down; + }; + + wake-n { + pins = "gpio81"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default { + clkreq { + pins = "gpio83"; + function = "pci_e1"; + bias-pull-up; + }; + + reset-n { + pins = "gpio82"; + function = "gpio"; + + drive-strength = <2>; + output-low; + bias-pull-down; + }; + + wake-n { + pins = "gpio84"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie2_default_state: pcie2-default { + clkreq { + pins = "gpio86"; + function = "pci_e2"; + bias-pull-up; + }; + + reset-n { + pins = "gpio85"; + function = "gpio"; + + drive-strength = <2>; + output-low; + bias-pull-down; + }; + + wake-n { + pins = "gpio87"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + }; + sdc2_default_state: sdc2-default { clk { pins = "sdc2_clk"; @@ -706,13 +1259,13 @@ cmd { pins = "sdc2_cmd"; bias-pull-up; - drive-strength = <16>; + drive-strength = <10>; }; data { pins = "sdc2_data"; bias-pull-up; - drive-strength = <16>; + drive-strength = <10>; }; }; @@ -792,3 +1345,10 @@ vdda-phy-supply = <&vreg_l9a_1p2>; vdda-pll-supply = <&vreg_l18a_0p92>; }; + +&vamacro { + pinctrl-0 = <&dmic01_active>; + pinctrl-names = "default"; + vdd-micb-supply = <&vreg_s4a_1p8>; + qcom,dmic-sample-rate = <600000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index 8ed7dd39f6e3..07c8b2c926c0 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -298,40 +298,6 @@ regulator-max-microvolt = <1128000>; }; - /* - * pp2040_s5a (smps5) and pp1056_s4a (smps4) are just - * inputs to other rails on AOP-managed PMICs on trogdor. - * The system is already configured to manage these rails - * automatically (enable when needed, adjust voltage for - * headroom) so we won't specify anything here. - * - * NOTE: though the rails have a voltage implied by their - * name, the automatic headroom calculation might not result - * in them being that voltage. ...and that's OK. - * Specifically the only point of these rails is to provide - * an input source for other rails and if we can satisify the - * needs of those other rails with a lower source voltage then - * we save power. - */ - - pp1200_l1a: ldo1 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp1000_l2a: ldo2 { - regulator-min-microvolt = <944000>; - regulator-max-microvolt = <1056000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp1000_l3a: ldo3 { - regulator-min-microvolt = <968000>; - regulator-max-microvolt = <1064000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - vdd_qlink_lv: vdd_qlink_lv_ck: vdd_qusb_hs0_core: @@ -350,24 +316,6 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; - pp2700_l5a: ldo5 { - regulator-min-microvolt = <2704000>; - regulator-max-microvolt = <2704000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - ebi0_cal: - ebi1_cal: - vddio_ck_ebi0: - vddio_ck_ebi1: - vddio_ebi0: - vddq: - pp600_l6a: ldo6 { - regulator-min-microvolt = <568000>; - regulator-max-microvolt = <648000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - vdd_cx_wlan: pp800_l9a: ldo9 { regulator-min-microvolt = <488000>; @@ -404,6 +352,11 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + /* + * On trogdor this needs to match l10a since we use it to + * give power to things like SPI flash which communicate back + * on lines powered by l10a. Thus we force to 1.8V. + */ pp1800_l13a: ldo13 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -424,12 +377,6 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; - pp2700_l16a: ldo16 { - regulator-min-microvolt = <2496000>; - regulator-max-microvolt = <3304000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - vdda_qusb_hs0_3p1: vdd_pdphy: pp3100_l17a: ldo17 { @@ -463,8 +410,8 @@ }; pp1800_l1c: ldo1 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1616000>; + regulator-max-microvolt = <1984000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; @@ -491,25 +438,10 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; - ld_pp1800_esim_l4c: - vddpx_5: - pp1800_l4c: ldo4 { - regulator-min-microvolt = <1648000>; - regulator-max-microvolt = <3304000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vddpx_6: - pp1800_l5c: ldo5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - vddpx_2: ppvar_l6c: ldo6 { regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3304000>; + regulator-max-microvolt = <2952000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; @@ -936,6 +868,13 @@ ap_spi_fp: &spi10 { /* PINCTRL - additions to nodes defined in sc7180.dtsi */ +&dp_hot_plug_det { + pinconf { + pins = "gpio117"; + bias-disable; + }; +}; + &qspi_cs0 { pinconf { pins = "gpio68"; diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 22b832fc62e3..1ea3344ab62c 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -682,6 +682,11 @@ reg = <0x25b 0x1>; bits = <1 3>; }; + + gpu_speed_bin: gpu_speed_bin@1d2 { + reg = <0x1d2 0x2>; + bits = <5 8>; + }; }; sdhc_1: sdhci@7c4000 { @@ -1434,8 +1439,6 @@ qcom,smem-state-names = "ipa-clock-enabled-valid", "ipa-clock-enabled"; - modem-remoteproc = <&remoteproc_mpss>; - status = "disabled"; }; @@ -1468,12 +1471,6 @@ pins = "gpio117"; function = "dp_hot"; }; - - pinconf { - pins = "gpio117"; - bias-disable; - input-enable; - }; }; qspi_clk: qspi-clk { @@ -2060,52 +2057,69 @@ #cooling-cells = <2>; + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "gfx-mem"; gpu_opp_table: opp-table { compatible = "operating-points-v2"; + opp-825000000 { + opp-hz = /bits/ 64 <825000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + opp-peak-kBps = <8532000>; + opp-supported-hw = <0x04>; + }; + opp-800000000 { opp-hz = /bits/ 64 <800000000>; opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; opp-peak-kBps = <8532000>; + opp-supported-hw = <0x07>; }; opp-650000000 { opp-hz = /bits/ 64 <650000000>; opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; opp-peak-kBps = <7216000>; + opp-supported-hw = <0x07>; }; opp-565000000 { opp-hz = /bits/ 64 <565000000>; opp-level = <RPMH_REGULATOR_LEVEL_NOM>; opp-peak-kBps = <5412000>; + opp-supported-hw = <0x07>; }; opp-430000000 { opp-hz = /bits/ 64 <430000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; opp-peak-kBps = <5412000>; + opp-supported-hw = <0x07>; }; opp-355000000 { opp-hz = /bits/ 64 <355000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS>; opp-peak-kBps = <3072000>; + opp-supported-hw = <0x07>; }; opp-267000000 { opp-hz = /bits/ 64 <267000000>; opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; opp-peak-kBps = <3072000>; + opp-supported-hw = <0x07>; }; opp-180000000 { opp-hz = /bits/ 64 <180000000>; opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; opp-peak-kBps = <1804000>; + opp-supported-hw = <0x07>; }; }; }; @@ -3355,6 +3369,7 @@ compatible = "qcom,apss-wdt-sc7180", "qcom,kpss-wdt"; reg = <0 0x17c10000 0 0x1000>; clocks = <&sleep_clk>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; }; timer@17c20000{ @@ -3596,7 +3611,7 @@ }; thermal-zones { - cpu0-thermal { + cpu0_thermal: cpu0-thermal { polling-delay-passive = <250>; polling-delay = <0>; @@ -3645,7 +3660,7 @@ }; }; - cpu1-thermal { + cpu1_thermal: cpu1-thermal { polling-delay-passive = <250>; polling-delay = <0>; @@ -3694,7 +3709,7 @@ }; }; - cpu2-thermal { + cpu2_thermal: cpu2-thermal { polling-delay-passive = <250>; polling-delay = <0>; @@ -3743,7 +3758,7 @@ }; }; - cpu3-thermal { + cpu3_thermal: cpu3-thermal { polling-delay-passive = <250>; polling-delay = <0>; @@ -3792,7 +3807,7 @@ }; }; - cpu4-thermal { + cpu4_thermal: cpu4-thermal { polling-delay-passive = <250>; polling-delay = <0>; @@ -3841,7 +3856,7 @@ }; }; - cpu5-thermal { + cpu5_thermal: cpu5-thermal { polling-delay-passive = <250>; polling-delay = <0>; @@ -3890,7 +3905,7 @@ }; }; - cpu6-thermal { + cpu6_thermal: cpu6-thermal { polling-delay-passive = <250>; polling-delay = <0>; @@ -3931,7 +3946,7 @@ }; }; - cpu7-thermal { + cpu7_thermal: cpu7-thermal { polling-delay-passive = <250>; polling-delay = <0>; @@ -3972,7 +3987,7 @@ }; }; - cpu8-thermal { + cpu8_thermal: cpu8-thermal { polling-delay-passive = <250>; polling-delay = <0>; @@ -4013,7 +4028,7 @@ }; }; - cpu9-thermal { + cpu9_thermal: cpu9-thermal { polling-delay-passive = <250>; polling-delay = <0>; diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index 37d5cc32f6b6..f91a928466c3 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -808,17 +808,19 @@ sdhc_1: sdhci@c0c4000 { compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5"; reg = <0x0c0c4000 0x1000>, - <0x0c0c5000 0x1000>; - reg-names = "hc", "cqhci"; + <0x0c0c5000 0x1000>, + <0x0c0c8000 0x8000>; + reg-names = "hc", "cqhci", "ice"; interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, - <&xo_board>; - clock-names = "core", "iface", "xo"; + <&gcc GCC_SDCC1_AHB_CLK>, + <&xo_board>, + <&gcc GCC_SDCC1_ICE_CORE_CLK>; + clock-names = "core", "iface", "xo", "ice"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index c0b93813ea9a..c4ac6f5dc008 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -1114,11 +1114,11 @@ reg = <0x10>; // CAM0_RST_N - reset-gpios = <&tlmm 9 0>; + reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&cam0_default>; gpios = <&tlmm 13 0>, - <&tlmm 9 0>; + <&tlmm 9 GPIO_ACTIVE_LOW>; clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; clock-names = "xvclk"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi new file mode 100644 index 000000000000..8f617f7b6d34 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -0,0 +1,623 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 OnePlus 6(T) (enchilada / fajita) common device tree source + * + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "sdm845.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/delete-node/ &rmtfs_mem; + +/ { + aliases { + hsuart0 = &uart6; + }; + + gpio-keys { + compatible = "gpio-keys"; + label = "Volume keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&volume_down_gpio &volume_up_gpio>; + + vol-down { + label = "Volume down"; + linux,code = <KEY_VOLUMEDOWN>; + gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + }; + + vol-up { + label = "Volume up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + }; + }; + + reserved-memory { + /* + * The rmtfs memory region in downstream is 'dynamically allocated' + * but given the same address every time. Hard code it as this address is + * where the modem firmware expects it to be. + */ + rmtfs_mem: memory@f5b01000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xf5b01000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + /* + * It seems like reserving the old rmtfs_mem region is also needed to prevent + * random crashes which are most likely modem related, more testing needed. + */ + removed_region: memory@88f00000 { + no-map; + reg = <0 0x88f00000 0 0x200000>; + }; + + ramoops: ramoops@ac300000 { + compatible = "ramoops"; + reg = <0 0xac300000 0 0x400000>; + record-size = <0x40000>; + console-size = <0x40000>; + ftrace-size = <0x40000>; + pmsg-size = <0x200000>; + devinfo-size = <0x1000>; + ecc-size = <16>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* + * Apparently RPMh does not provide support for PM8998 S4 because it + * is always-on; model it as a fixed regulator. + */ + vreg_s4a_1p8: pm8998-smps4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + /* + * The touchscreen regulator seems to be controlled somehow by a gpio. + * Model it as a fixed regulator and keep it on. Without schematics we + * don't know how this is actually wired up... + */ + ts_1p8_supply: ts-1p8-regulator { + compatible = "regulator-fixed"; + regulator-name = "ts_1p8_supply"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 88 0>; + enable-active-high; + regulator-boot-on; + }; +}; + +&adsp_pas { + status = "okay"; + firmware-name = "qcom/sdm845/oneplus6/adsp.mbn"; +}; + +&apps_rsc { + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_1p025>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l3-l11-supply = <&vreg_s7a_1p025>; + vdd-l4-l5-supply = <&vreg_s7a_1p025>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l9-supply = <&vreg_bob>; + vdd-l10-l23-l25-supply = <&vreg_bob>; + vdd-l13-l19-l21-supply = <&vreg_bob>; + vdd-l16-l28-supply = <&vreg_bob>; + vdd-l18-l22-supply = <&vreg_bob>; + vdd-l20-l24-supply = <&vreg_bob>; + vdd-l26-supply = <&vreg_s3a_1p35>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vdda_mipi_dsi0_pll: + vdda_qlink_lv: + vdda_ufs1_core: + vdda_usb1_ss_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_qusb_hs0_1p8: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p88: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_qusb_hs0_3p1: + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_mipi_dsi0_1p2: + vdda_ufs1_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l28a_3p0: ldo28 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pmi8998-rpmh-regulators { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-bypass; + }; + }; + + pm8005-rpmh-regulators { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s3c_0p6: smps3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + }; + }; +}; + +&cdsp_pas { + status = "okay"; + firmware-name = "qcom/sdm845/oneplus6/cdsp.mbn"; +}; + +&dsi0 { + status = "okay"; + vdda-supply = <&vdda_mipi_dsi0_1p2>; + + #address-cells = <1>; + #size-cells = <0>; + + /* + * Both devices use different panels but all other properties + * are common. Compatible line is declared in device dts. + */ + display_panel: panel@0 { + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + vddio-supply = <&vreg_l14a_1p88>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + status = "okay"; + vdds-supply = <&vdda_mipi_dsi0_pll>; +}; + +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_LPASS_Q6_AXI_CLK>, + <GCC_LPASS_SWAY_CLK>; +}; + +&gpu { + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sdm845/oneplus6/a630_zap.mbn"; + }; +}; + +&i2c12 { + status = "okay"; + clock-frequency = <400000>; + + synaptics-rmi4-i2c@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_default_pins>; + + vdd-supply = <&vreg_l28a_3p0>; + vio-supply = <&ts_1p8_supply>; + + syna,reset-delay-ms = <200>; + syna,startup-delay-ms = <200>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4_f12: rmi4-f12@12 { + reg = <0x12>; + touchscreen-x-mm = <68>; + touchscreen-y-mm = <144>; + syna,sensor-type = <1>; + syna,rezero-wait-ms = <200>; + }; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + +/* Modem/wifi*/ +&mss_pil { + status = "okay"; + firmware-name = "qcom/sdm845/oneplus6/mba.mbn", "qcom/sdm845/oneplus6/modem.mbn"; +}; + +&pm8998_gpio { + volume_down_gpio: pm8998_gpio5 { + pinconf { + pins = "gpio5"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = <0>; + }; + }; + + volume_up_gpio: pm8998_gpio6 { + pinconf { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = <0>; + }; + }; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qup_i2c12_default { + mux { + pins = "gpio49", "gpio50"; + function = "qup12"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_i2c10_default { + pinconf { + pins = "gpio55", "gpio56"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_uart9_default { + pinconf-tx { + pins = "gpio4"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-rx { + pins = "gpio5"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +/* + * Prevent garbage data on bluetooth UART lines + */ +&qup_uart6_default { + pinmux { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "qup6"; + }; + + cts { + pins = "gpio45"; + bias-pull-down; + }; + + rts-tx { + pins = "gpio46", "gpio47"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio48"; + bias-pull-up; + }; +}; + +&uart6 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + /* + * This path is relative to the qca/ + * subdir under lib/firmware. + */ + firmware-name = "oneplus6/crnv21.bin"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <600000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; +}; + +&usb_1 { + status = "okay"; + + /* + * disable USB3 clock requirement as the device only supports + * USB2. + */ + qcom,select-utmi-as-pipe-clk; +}; + +&usb_1_dwc3 { + /* + * We don't have the capability to switch modes yet. + */ + dr_mode = "peripheral"; + + /* fastest mode for USB 2 */ + maximum-speed = "high-speed"; + + /* Remove USB3 phy as it's unused on this device. */ + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + tri_state_key_default: tri_state_key_default { + mux { + pins = "gpio40", "gpio42", "gpio26"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + ts_default_pins: ts-int { + mux { + pins = "gpio99", "gpio125"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + }; + }; + + panel_reset_pins: panel-reset { + mux { + pins = "gpio6", "gpio25", "gpio26"; + function = "gpio"; + drive-strength = <8>; + bias-disable = <0>; + }; + }; + + panel_te_pin: panel-te { + mux { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + }; + + panel_esd_pin: panel-esd { + mux { + pins = "gpio30"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + }; +}; + +&wifi { + status = "okay"; + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + + qcom,snoc-host-cap-8bit-quirk; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts new file mode 100644 index 000000000000..72842c887617 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 OnePlus 6 (enchilada) device tree. + * + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#include "sdm845-oneplus-common.dtsi" + +/ { + model = "OnePlus 6"; + compatible = "oneplus,enchilada", "qcom,sdm845"; +}; + +&display_panel { + status = "okay"; + + compatible = "samsung,sofef00"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts new file mode 100644 index 000000000000..969b36dc9e2c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 OnePlus 6T (fajita) device tree. + * + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#include "sdm845-oneplus-common.dtsi" + +/ { + model = "OnePlus 6T"; + compatible = "oneplus,fajita", "qcom,sdm845"; +}; + +&display_panel { + status = "okay"; + + compatible = "samsung,s6e3fc2x01"; +}; + +&rmi4_f12 { + touchscreen-y-mm = <148>; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index bcf888381f14..454f794af547 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -2366,8 +2366,6 @@ qcom,smem-state-names = "ipa-clock-enabled-valid", "ipa-clock-enabled"; - modem-remoteproc = <&mss_pil>; - status = "disabled"; }; @@ -4573,6 +4571,7 @@ compatible = "qcom,apss-wdt-sdm845", "qcom,kpss-wdt"; reg = <0 0x17980000 0 0x1000>; clocks = <&sleep_clk>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; }; apss_shared: mailbox@17990000 { diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index 8b40f96e9780..140db2d5ba31 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -13,7 +13,7 @@ #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> -#include "sdm845.dtsi" +#include "sdm850.dtsi" #include "pm8998.dtsi" / { diff --git a/arch/arm64/boot/dts/qcom/sdm850.dtsi b/arch/arm64/boot/dts/qcom/sdm850.dtsi new file mode 100644 index 000000000000..b1c2cf566c7a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm850.dtsi @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM850 SoC device tree source + * + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#include "sdm845.dtsi" + +&cpu4_opp_table { + cpu4_opp33: opp-2841600000 { + opp-hz = /bits/ 64 <2841600000>; + opp-peak-kBps = <7216000 25497600>; + }; + + cpu4_opp34: opp-2956800000 { + opp-hz = /bits/ 64 <2956800000>; + opp-peak-kBps = <7216000 25497600>; + turbo-mode; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 5270bda7418f..e5bb17bc2f46 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -47,8 +47,12 @@ compatible = "qcom,kryo485"; reg = <0x0 0x0>; enable-method = "psci"; + capacity-dmips-mhz = <488>; + dynamic-power-coefficient = <232>; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; @@ -64,8 +68,12 @@ compatible = "qcom,kryo485"; reg = <0x0 0x100>; enable-method = "psci"; + capacity-dmips-mhz = <488>; + dynamic-power-coefficient = <232>; next-level-cache = <&L2_100>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; @@ -79,8 +87,12 @@ compatible = "qcom,kryo485"; reg = <0x0 0x200>; enable-method = "psci"; + capacity-dmips-mhz = <488>; + dynamic-power-coefficient = <232>; next-level-cache = <&L2_200>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; @@ -93,8 +105,12 @@ compatible = "qcom,kryo485"; reg = <0x0 0x300>; enable-method = "psci"; + capacity-dmips-mhz = <488>; + dynamic-power-coefficient = <232>; next-level-cache = <&L2_300>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; @@ -107,8 +123,12 @@ compatible = "qcom,kryo485"; reg = <0x0 0x400>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <369>; next-level-cache = <&L2_400>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; @@ -121,8 +141,12 @@ compatible = "qcom,kryo485"; reg = <0x0 0x500>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <369>; next-level-cache = <&L2_500>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; @@ -135,8 +159,12 @@ compatible = "qcom,kryo485"; reg = <0x0 0x600>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <369>; next-level-cache = <&L2_600>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; @@ -149,14 +177,90 @@ compatible = "qcom,kryo485"; reg = <0x0 0x700>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <421>; next-level-cache = <&L2_700>; qcom,freq-domain = <&cpufreq_hw 2>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; }; }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <355>; + exit-latency-us = <909>; + min-residency-us = <3934>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <241>; + exit-latency-us = <1461>; + min-residency-us = <4488>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + idle-state-name = "cluster-power-collapse"; + arm,psci-suspend-param = <0x4100c244>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9987>; + local-timer-stop; + }; + }; }; firmware { @@ -186,6 +290,59 @@ psci { compatible = "arm,psci-1.0"; method = "smc"; + + CPU_PD0: cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; }; reserved-memory { @@ -1818,6 +1975,7 @@ compatible = "qcom,apss-wdt-sm8150", "qcom,kpss-wdt"; reg = <0 0x17c10000 0 0x1000>; clocks = <&sleep_clk>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; }; timer@17c20000 { diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts index dea00f19711d..5b4c5b08434c 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -24,6 +24,106 @@ stdout-path = "serial0:115200n8"; }; + thermal-zones { + camera-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150l_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + conn-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150b_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + mmw-pa1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150_adc_tm 2>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + mmw-pa2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150l_adc_tm 2>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + skin-msm-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150l_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + skin-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + xo-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -186,6 +286,13 @@ regulator-max-microvolt = <3008000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + + vreg_l18a_0p9: ldo18 { + regulator-name = "vreg_l18a_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; }; pm8150l-rpmh-regulators { @@ -358,6 +465,13 @@ firmware-name = "qcom/sm8250/cdsp.mbn"; }; +&gpu { + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sm8250/a650_zap.mbn"; + }; +}; + &i2c1 { status = "okay"; clock-frequency = <1000000>; @@ -378,6 +492,115 @@ /* rtc6226 @ 64 */ }; +&pm8150_adc { + xo-therm@4c { + reg = <ADC5_XO_THERM_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + skin-therm@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + pa-therm1@4e { + reg = <ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm8150_adc_tm { + status = "okay"; + + xo-therm@0 { + reg = <0>; + io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + skin-therm@1 { + reg = <1>; + io-channels = <&pm8150_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + pa-therm1@2 { + reg = <2>; + io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm8150b_adc { + conn-therm@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm8150b_adc_tm { + status = "okay"; + + conn-therm@0 { + reg = <0>; + io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm8150l_adc_tm { + status = "okay"; + + camera-flash-therm@0 { + reg = <0>; + io-channels = <&pm8150l_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + skin-msm-therm@1 { + reg = <1>; + io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + pa-therm2@2 { + reg = <2>; + io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm8150l_adc { + camera-flash-therm@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + skin-msm-therm@4e { + reg = <ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + pa-therm2@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + &pm8150_rtc { status = "okay"; }; @@ -426,3 +649,49 @@ vdda-pll-supply = <&vreg_l9a_1p2>; vdda-pll-max-microamp = <19000>; }; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5a_0p875>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l2a_3p1>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l9a_1p2>; + vdda-pll-supply = <&vreg_l18a_0p9>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5a_0p875>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l2a_3p1>; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l9a_1p2>; + vdda-pll-supply = <&vreg_l18a_0p9>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 65acd1f381eb..947e1accae3a 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -4,14 +4,18 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,dispcc-sm8250.h> #include <dt-bindings/clock/qcom,gcc-sm8250.h> #include <dt-bindings/clock/qcom,gpucc-sm8250.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> +#include <dt-bindings/interconnect/qcom,sm8250.h> #include <dt-bindings/mailbox/qcom-ipcc.h> #include <dt-bindings/power/qcom-aoss-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,apr.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/thermal/thermal.h> / { @@ -89,6 +93,8 @@ compatible = "qcom,kryo485"; reg = <0x0 0x0>; enable-method = "psci"; + capacity-dmips-mhz = <448>; + dynamic-power-coefficient = <205>; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; @@ -106,6 +112,8 @@ compatible = "qcom,kryo485"; reg = <0x0 0x100>; enable-method = "psci"; + capacity-dmips-mhz = <448>; + dynamic-power-coefficient = <205>; next-level-cache = <&L2_100>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; @@ -120,6 +128,8 @@ compatible = "qcom,kryo485"; reg = <0x0 0x200>; enable-method = "psci"; + capacity-dmips-mhz = <448>; + dynamic-power-coefficient = <205>; next-level-cache = <&L2_200>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; @@ -134,6 +144,8 @@ compatible = "qcom,kryo485"; reg = <0x0 0x300>; enable-method = "psci"; + capacity-dmips-mhz = <448>; + dynamic-power-coefficient = <205>; next-level-cache = <&L2_300>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; @@ -148,6 +160,8 @@ compatible = "qcom,kryo485"; reg = <0x0 0x400>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <379>; next-level-cache = <&L2_400>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; @@ -162,6 +176,8 @@ compatible = "qcom,kryo485"; reg = <0x0 0x500>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <379>; next-level-cache = <&L2_500>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; @@ -177,6 +193,8 @@ compatible = "qcom,kryo485"; reg = <0x0 0x600>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <379>; next-level-cache = <&L2_600>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; @@ -191,6 +209,8 @@ compatible = "qcom,kryo485"; reg = <0x0 0x700>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <444>; next-level-cache = <&L2_700>; qcom,freq-domain = <&cpufreq_hw 2>; #cooling-cells = <2>; @@ -199,6 +219,42 @@ next-level-cache = <&L3_0>; }; }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; }; firmware { @@ -214,6 +270,13 @@ reg = <0x0 0x80000000 0x0 0x0>; }; + mmcx_reg: mmcx-reg { + compatible = "regulator-fixed-domain"; + power-domains = <&rpmhpd SM8250_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + regulator-name = "MMCX"; + }; + pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; @@ -321,7 +384,7 @@ }; }; - smem: qcom,smem { + smem { compatible = "qcom,smem"; memory-region = <&smem_mem>; hwlocks = <&tcsr_mutex 3>; @@ -1168,6 +1231,299 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + pcie0: pci@1c00000 { + compatible = "qcom,pcie-sm8250", "snps,dw-pcie"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu", + "ddrss_sf_tbu"; + + iommus = <&apps_smmu 0x1c00 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, + <0x100 &apps_smmu 0x1c01 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_0_GDSC>; + + phys = <&pcie0_lane>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie0_phy: phy@1c06000 { + compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy"; + reg = <0 0x01c06000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_WIFI_CLKREF_EN>, + <&gcc GCC_PCIE0_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie0_lane: lanes@1c06200 { + reg = <0 0x1c06200 0 0x170>, /* tx */ + <0 0x1c06400 0 0x200>, /* rx */ + <0 0x1c06800 0 0x1f0>, /* pcs */ + <0 0x1c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */ + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "pipe0"; + + #phy-cells = <0>; + clock-output-names = "pcie_0_pipe_clk"; + }; + }; + + pcie1: pci@1c08000 { + compatible = "qcom,pcie-sm8250", "snps,dw-pcie"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + + interrupts = <GIC_SPI 306 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_WIGIG_CLKREF_EN>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ref", + "tbu", + "ddrss_sf_tbu"; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommus = <&apps_smmu 0x1c80 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, + <0x100 &apps_smmu 0x1c81 0x1>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_1_GDSC>; + + phys = <&pcie1_lane>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0e000 { + compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy"; + reg = <0 0x01c0e000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_WIGIG_CLKREF_EN>, + <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie1_lane: lanes@1c0e200 { + reg = <0 0x1c0e200 0 0x170>, /* tx0 */ + <0 0x1c0e400 0 0x200>, /* rx0 */ + <0 0x1c0ea00 0 0x1f0>, /* pcs */ + <0 0x1c0e600 0 0x170>, /* tx1 */ + <0 0x1c0e800 0 0x200>, /* rx1 */ + <0 0x1c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */ + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "pipe0"; + + #phy-cells = <0>; + clock-output-names = "pcie_1_pipe_clk"; + }; + }; + + pcie2: pci@1c10000 { + compatible = "qcom,pcie-sm8250", "snps,dw-pcie"; + reg = <0 0x01c10000 0 0x3000>, + <0 0x64000000 0 0xf1d>, + <0 0x64000f20 0 0xa8>, + <0 0x64001000 0 0x1000>, + <0 0x64100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <2>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x64200000 0x0 0x64200000 0x0 0x100000>, + <0x02000000 0x0 0x64300000 0x0 0x64300000 0x0 0x3d00000>; + + interrupts = <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 290 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 415 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 416 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 417 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_2_PIPE_CLK>, + <&gcc GCC_PCIE_2_AUX_CLK>, + <&gcc GCC_PCIE_2_CFG_AHB_CLK>, + <&gcc GCC_PCIE_2_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_2_SLV_AXI_CLK>, + <&gcc GCC_PCIE_2_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_MDM_CLKREF_EN>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ref", + "tbu", + "ddrss_sf_tbu"; + + assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommus = <&apps_smmu 0x1d00 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1d00 0x1>, + <0x100 &apps_smmu 0x1d01 0x1>; + + resets = <&gcc GCC_PCIE_2_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_2_GDSC>; + + phys = <&pcie2_lane>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie2_phy: phy@1c16000 { + compatible = "qcom,sm8250-qmp-modem-pcie-phy"; + reg = <0 0x1c16000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_2_CFG_AHB_CLK>, + <&gcc GCC_PCIE_MDM_CLKREF_EN>, + <&gcc GCC_PCIE2_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_2_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE2_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie2_lane: lanes@1c0e200 { + reg = <0 0x1c16200 0 0x170>, /* tx0 */ + <0 0x1c16400 0 0x200>, /* rx0 */ + <0 0x1c16a00 0 0x1f0>, /* pcs */ + <0 0x1c16600 0 0x170>, /* tx1 */ + <0 0x1c16800 0 0x200>, /* rx1 */ + <0 0x1c16e00 0 0xf4>; /* "pcs_com" same as pcs_misc? */ + clocks = <&gcc GCC_PCIE_2_PIPE_CLK>; + clock-names = "pipe0"; + + #phy-cells = <0>; + clock-output-names = "pcie_2_pipe_clk"; + }; + }; + ufs_mem_hc: ufshc@1d84000 { compatible = "qcom,sm8250-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; @@ -1253,15 +1609,169 @@ #hwlock-cells = <1>; }; + wsamacro: codec@3240000 { + compatible = "qcom,sm8250-lpass-wsa-macro"; + reg = <0 0x03240000 0 0x1000>; + clocks = <&audiocc 1>, + <&audiocc 0>, + <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&aoncc 0>, + <&vamacro>; + + clock-names = "mclk", "npl", "macro", "dcodec", "va", "fsgen"; + + #clock-cells = <0>; + clock-frequency = <9600000>; + clock-output-names = "mclk"; + #sound-dai-cells = <1>; + + pinctrl-names = "default"; + pinctrl-0 = <&wsa_swr_active>; + }; + + swr0: soundwire-controller@3250000 { + reg = <0 0x03250000 0 0x2000>; + compatible = "qcom,soundwire-v1.5.1"; + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&wsamacro>; + clock-names = "iface"; + + qcom,din-ports = <2>; + qcom,dout-ports = <6>; + + qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>; + qcom,ports-block-pack-mode = /bits/ 8 <0x0 0x0 0x1 0x0 0x0 0x1 0x0 0x0>; + + #sound-dai-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; + }; + + audiocc: clock-controller@3300000 { + compatible = "qcom,sm8250-lpass-audiocc"; + reg = <0 0x03300000 0 0x30000>; + #clock-cells = <1>; + clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio", "bus"; + }; + + vamacro: codec@3370000 { + compatible = "qcom,sm8250-lpass-va-macro"; + reg = <0 0x03370000 0 0x1000>; + clocks = <&aoncc 0>, + <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + + clock-names = "mclk", "macro", "dcodec"; + + #clock-cells = <0>; + clock-frequency = <9600000>; + clock-output-names = "fsgen"; + #sound-dai-cells = <1>; + }; + + aoncc: clock-controller@3380000 { + compatible = "qcom,sm8250-lpass-aoncc"; + reg = <0 0x03380000 0 0x40000>; + #clock-cells = <1>; + clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio", "bus"; + }; + + lpass_tlmm: pinctrl@33c0000{ + compatible = "qcom,sm8250-lpass-lpi-pinctrl"; + reg = <0 0x033c0000 0x0 0x20000>, + <0 0x03550000 0x0 0x10000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 14>; + + clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + + wsa_swr_active: wsa-swr-active-pins { + clk { + pins = "gpio10"; + function = "wsa_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data { + pins = "gpio11"; + function = "wsa_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + + }; + }; + + wsa_swr_sleep: wsa-swr-sleep-pins { + clk { + pins = "gpio10"; + function = "wsa_swr_clk"; + drive-strength = <2>; + input-enable; + bias-pull-down; + }; + + data { + pins = "gpio11"; + function = "wsa_swr_data"; + drive-strength = <2>; + input-enable; + bias-pull-down; + + }; + }; + + dmic01_active: dmic01-active-pins { + clk { + pins = "gpio6"; + function = "dmic1_clk"; + drive-strength = <8>; + output-high; + }; + data { + pins = "gpio7"; + function = "dmic1_data"; + drive-strength = <8>; + input-enable; + }; + }; + + dmic01_sleep: dmic01-sleep-pins { + clk { + pins = "gpio6"; + function = "dmic1_clk"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + data { + pins = "gpio7"; + function = "dmic1_data"; + drive-strength = <2>; + pull-down; + input-enable; + }; + }; + }; + gpu: gpu@3d00000 { - /* - * note: the amd,imageon compatible makes it possible - * to use the drm/msm driver without the display node, - * make sure to remove it when display node is added - */ compatible = "qcom,adreno-650.2", - "qcom,adreno", - "amd,imageon"; + "qcom,adreno"; #stream-id-cells = <16>; reg = <0 0x03d00000 0 0x40000>; @@ -1557,6 +2067,9 @@ }; }; + sound: sound { + }; + usb_1_hsphy: phy@88e3000 { compatible = "qcom,sm8250-usb-hs-phy", "qcom,usb-snps-hs-7nm-phy"; @@ -1657,7 +2170,7 @@ clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, - <&xo_board>; + <&rpmhcc RPMH_CXO_CLK>; clock-names = "iface", "core", "xo"; iommus = <&apps_smmu 0x4a0 0x0>; qcom,dll-config = <0x0007642c>; @@ -1758,6 +2271,12 @@ }; }; + system-cache-controller@9200000 { + compatible = "qcom,sm8250-llcc"; + reg = <0 0x09200000 0 0x1d0000>, <0 0x09600000 0 0x50000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + }; + usb_2: usb@a8f8800 { compatible = "qcom,sm8250-dwc3", "qcom,dwc3"; reg = <0 0x0a8f8800 0 0x400>; @@ -1803,6 +2322,299 @@ }; }; + mdss: mdss@ae00000 { + compatible = "qcom,sdm845-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_DISPLAY_CFG>, + <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>, + <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>; + interconnect-names = "notused", "mdp0-mem", "mdp1-mem"; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "nrt_bus", "core"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>; + assigned-clock-rates = <460000000>; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x820 0x402>; + + status = "disabled"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + mdss_mdp: mdp@ae01000 { + compatible = "qcom,sdm845-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "core", "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <460000000>, + <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SM8250_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + + mdp_opp_table: mdp-opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + dsi0: dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SM8250_MMCX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: dsi-phy@ae94400 { + compatible = "qcom,dsi-phy-7nm"; + reg = <0 0x0ae94400 0 0x200>, + <0 0x0ae94600 0 0x280>, + <0 0x0ae94900 0 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + dsi1: dsi@ae96000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae96000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SM8250_MMCX>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: dsi-phy@ae96400 { + compatible = "qcom,dsi-phy-7nm"; + reg = <0 0x0ae96400 0 0x200>, + <0 0x0ae96600 0 0x280>, + <0 0x0ae96900 0 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + + dsi_opp_table: dsi-opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sm8250-dispcc"; + reg = <0 0x0af00000 0 0x20000>; + mmcx-supply = <&mmcx_reg>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&dsi0_phy 0>, + <&dsi0_phy 1>, + <&dsi1_phy 0>, + <&dsi1_phy 1>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <&sleep_clk>; + clock-names = "bi_tcxo", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dsi1_phy_pll_out_byteclk", + "dsi1_phy_pll_out_dsiclk", + "dp_link_clk_divsel_ten", + "dp_vco_divided_clk_src_mux", + "dptx1_phy_pll_link_clk", + "dptx1_phy_pll_vco_div_clk", + "dptx2_phy_pll_link_clk", + "dptx2_phy_pll_vco_div_clk", + "edp_phy_pll_link_clk", + "edp_phy_pll_vco_div_clk", + "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sm8250-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>; @@ -1880,6 +2692,37 @@ gpio-ranges = <&tlmm 0 0 180>; wakeup-parent = <&pdc>; + pri_mi2s_active: pri-mi2s-active { + sclk { + pins = "gpio138"; + function = "mi2s0_sck"; + drive-strength = <8>; + bias-disable; + }; + + ws { + pins = "gpio141"; + function = "mi2s0_ws"; + drive-strength = <8>; + output-high; + }; + + data0 { + pins = "gpio139"; + function = "mi2s0_data0"; + drive-strength = <8>; + bias-disable; + output-high; + }; + + data1 { + pins = "gpio140"; + function = "mi2s0_data1"; + drive-strength = <8>; + output-high; + }; + }; + qup_i2c0_default: qup-i2c0-default { mux { pins = "gpio28", "gpio29"; @@ -2476,6 +3319,30 @@ function = "qup18"; }; }; + + tert_mi2s_active: tert-mi2s-active { + sck { + pins = "gpio133"; + function = "mi2s2_sck"; + drive-strength = <8>; + bias-disable; + }; + + data0 { + pins = "gpio134"; + function = "mi2s2_data0"; + drive-strength = <8>; + bias-disable; + output-high; + }; + + ws { + pins = "gpio135"; + function = "mi2s2_ws"; + drive-strength = <8>; + output-high; + }; + }; }; apps_smmu: iommu@15000000 { @@ -2620,6 +3487,60 @@ label = "lpass"; qcom,remote-pid = <2>; + apr { + compatible = "qcom,apr-v2"; + qcom,glink-channels = "apr_audio_svc"; + qcom,apr-domain = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + + apr-service@3 { + reg = <APR_SVC_ADSP_CORE>; + compatible = "qcom,q6core"; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + }; + + q6afe: apr-service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + + q6afecc: cc { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; + }; + }; + + q6asm: apr-service@7 { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x1801 0x0>; + }; + }; + + q6adm: apr-service@8 { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + fastrpc { compatible = "qcom,fastrpc"; qcom,glink-channels = "fastrpcglink-apps-dsp"; @@ -2661,6 +3582,7 @@ compatible = "qcom,apss-wdt-sm8250", "qcom,kpss-wdt"; reg = <0 0x17c10000 0 0x1000>; clocks = <&sleep_clk>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; }; timer@17c20000 { diff --git a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts new file mode 100644 index 000000000000..8923657579fb --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts @@ -0,0 +1,250 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8350.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. sm8350 MTP"; + compatible = "qcom,sm8350-mtp", "qcom,sm8350"; + + aliases { + serial0 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + pm8350-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + + vdd-l1-l4-supply = <&vreg_s11b_0p95>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_bob>; + vdd-l6-l9-l10-supply = <&vreg_s11b_0p95>; + vdd-l8-supply = <&vreg_s2c_0p8>; + + vreg_s10b_1p8: smps10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_s11b_0p95: smps11 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_s12b_1p25: smps12 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1360000>; + }; + + vreg_l1b_0p88: ldo1 { + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p07: ldo2 { + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3b_0p9: ldo3 { + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_0p88: ldo5 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <888000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p2: ldo6 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_2p96: ldo7 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_1p2: ldo9 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8350c-rpmh-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l12-supply = <&vreg_s1c_1p86>; + vdd-l2-l8-supply = <&vreg_s1c_1p86>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + vdd-l10-supply = <&vreg_s12b_1p25>; + + vdd-bob-supply = <&vph_pwr>; + + vreg_s1c_1p86: smps1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1952000>; + }; + + vreg_s2c_0p8: smps2 { + regulator-min-microvolt = <640000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_s10c_1p05: smps10 { + regulator-min-microvolt = <1048000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_1p8: ldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_3p0: ldo3 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_uim1: ldo4 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5c_uim2: ldo5 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_1p8: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p96: ldo9 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_1p2: ldo10 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_2p96: ldo11 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12c_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13c_3p0: ldo13 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <52 8>; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi new file mode 100644 index 000000000000..5ef460458f5c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -0,0 +1,499 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Linaro Limaited + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/power/qcom-aoss-qmp.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo685"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo685"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&L2_100>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo685"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&L2_200>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo685"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&L2_300>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo685"; + reg = <0x0 0x400>; + enable-method = "psci"; + next-level-cache = <&L2_400>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo685"; + reg = <0x0 0x500>; + enable-method = "psci"; + next-level-cache = <&L2_500>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo685"; + reg = <0x0 0x600>; + enable-method = "psci"; + next-level-cache = <&L2_600>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo685"; + reg = <0x0 0x700>; + enable-method = "psci"; + next-level-cache = <&L2_700>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm8350", "qcom,scm"; + #reset-cells = <1>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@80000000 { + reg = <0x0 0x80000000 0x0 0x600000>; + no-map; + }; + + xbl_aop_mem: memory@80700000 { + no-map; + reg = <0x0 0x80700000 0x0 0x160000>; + }; + + cmd_db: memory@80860000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x80860000 0x0 0x20000>; + no-map; + }; + + reserved_xbl_uefi_log: memory@80880000 { + reg = <0x0 0x80880000 0x0 0x14000>; + no-map; + }; + + smem_mem: memory@80900000 { + reg = <0x0 0x80900000 0x0 0x200000>; + no-map; + }; + + cpucp_fw_mem: memory@80b00000 { + reg = <0x0 0x80b00000 0x0 0x100000>; + no-map; + }; + + cdsp_secure_heap: memory@80c00000 { + reg = <0x0 0x80c00000 0x0 0x4600000>; + no-map; + }; + + pil_camera_mem: mmeory@85200000 { + reg = <0x0 0x85200000 0x0 0x500000>; + no-map; + }; + + pil_video_mem: memory@85700000 { + reg = <0x0 0x85700000 0x0 0x500000>; + no-map; + }; + + pil_cvp_mem: memory@85c00000 { + reg = <0x0 0x85c00000 0x0 0x500000>; + no-map; + }; + + pil_adsp_mem: memory@86100000 { + reg = <0x0 0x86100000 0x0 0x2100000>; + no-map; + }; + + pil_slpi_mem: memory@88200000 { + reg = <0x0 0x88200000 0x0 0x1500000>; + no-map; + }; + + pil_cdsp_mem: memory@89700000 { + reg = <0x0 0x89700000 0x0 0x1e00000>; + no-map; + }; + + pil_ipa_fw_mem: memory@8b500000 { + reg = <0x0 0x8b500000 0x0 0x10000>; + no-map; + }; + + pil_ipa_gsi_mem: memory@8b510000 { + reg = <0x0 0x8b510000 0x0 0xa000>; + no-map; + }; + + pil_gpu_mem: memory@8b51a000 { + reg = <0x0 0x8b51a000 0x0 0x2000>; + no-map; + }; + + pil_spss_mem: memory@8b600000 { + reg = <0x0 0x8b600000 0x0 0x100000>; + no-map; + }; + + pil_modem_mem: memory@8b800000 { + reg = <0x0 0x8b800000 0x0 0x10000000>; + no-map; + }; + + hyp_reserved_mem: memory@d0000000 { + reg = <0x0 0xd0000000 0x0 0x800000>; + no-map; + }; + + pil_trustedvm_mem: memory@d0800000 { + reg = <0x0 0xd0800000 0x0 0x76f7000>; + no-map; + }; + + qrtr_shbuf: memory@d7ef7000 { + reg = <0x0 0xd7ef7000 0x0 0x9000>; + no-map; + }; + + chan0_shbuf: memory@d7f00000 { + reg = <0x0 0xd7f00000 0x0 0x80000>; + no-map; + }; + + chan1_shbuf: memory@d7f80000 { + reg = <0x0 0xd7f80000 0x0 0x80000>; + no-map; + }; + + removed_mem: memory@d8800000 { + reg = <0x0 0xd8800000 0x0 0x6800000>; + no-map; + }; + }; + + smem: qcom,smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sm8350"; + reg = <0x0 0x00100000 0x0 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "bi_tcxo", "sleep_clk"; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>; + }; + + ipcc: mailbox@408000 { + compatible = "qcom,sm8350-ipcc", "qcom,ipcc"; + reg = <0 0x00408000 0 0x1000>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + qupv3_id_1: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x009c0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc 121>, + <&gcc 122>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + uart2: serial@98c000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x0098c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc 83>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart3_default_state>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x40000>; + #hwlock-cells = <1>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sm8350-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>; + qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>, <55 306 4>, + <59 312 3>, <62 374 2>, <64 434 2>, <66 438 3>, + <69 86 1>, <70 520 54>, <124 609 31>, <155 63 1>, + <156 716 12>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + aoss_qmp: qmp@c300000 { + compatible = "qcom,sm8350-aoss-qmp"; + reg = <0 0x0c300000 0 0x100000>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + #power-domain-cells = <1>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sm8350-tlmm"; + reg = <0 0x0f100000 0 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 203>; + + qup_uart3_default_state: qup-uart3-default-state { + rx { + pins = "gpio18"; + function = "qup3"; + }; + tx { + pins = "gpio19"; + function = "qup3"; + }; + }; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + timer@17c20000 { + compatible = "arm,armv7-timer-mem"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + reg = <0x0 0x17c20000 0x0 0x1000>; + clock-frequency = <19200000>; + + frame@17c21000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c21000 0x0 0x1000>, + <0x0 0x17c22000 0x0 0x1000>; + }; + + frame@17c23000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c23000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c25000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c25000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c27000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c27000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c29000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c29000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c2b000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c2b000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c2d000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c2d000 0x0 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + label = "apps_rsc"; + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x18200000 0x0 0x10000>, + <0x0 0x18210000 0x0 0x10000>, + <0x0 0x18220000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>, + <WAKE_TCS 3>, <CONTROL_TCS 1>; + + rpmhcc: clock-controller { + compatible = "qcom,sm8350-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 3b8b03705917..f2de2fa0c8b8 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2.dtb dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex.dtb dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dtb +dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-beacon-rzg2n-kit.dtb dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n.dtb dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex.dtb dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex-idk-1110wr.dtb @@ -21,6 +22,7 @@ dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874.dtb dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874-idk-2121wr.dtb dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874-mipi-2.1.dtb +dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-beacon-rzg2h-kit.dtb dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h.dtb dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex.dtb dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex-idk-1110wr.dtb diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi index e66b5b36e489..30c169b08536 100644 --- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi @@ -5,23 +5,24 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/clk/versaclock.h> / { backlight_lvds: backlight-lvds { compatible = "pwm-backlight"; power-supply = <®_lcd>; - enable-gpios = <&gpio_exp1 3 GPIO_ACTIVE_LOW>; - pwms = <&pwm2 0 50000>; + enable-gpios = <&gpio_exp1 3 GPIO_ACTIVE_HIGH>; + pwms = <&pwm2 0 25000>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; }; - backlight_rgb: backlight-rgb { + backlight_dpi: backlight-dpi { compatible = "pwm-backlight"; power-supply = <®_lcd>; enable-gpios = <&gpio_exp1 7 GPIO_ACTIVE_LOW>; - pwms = <&pwm0 0 50000>; - brightness-levels = <0 4 8 16 32 64 128 255>; + pwms = <&pwm0 0 25000>; + brightness-levels = <0 25 33 50 63 75 88 100>; default-brightness-level = <6>; }; @@ -39,38 +40,38 @@ keys { compatible = "gpio-keys"; - key-1 { + key-1 { /* S19 */ gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; - linux,code = <KEY_1>; - label = "Switch-1"; + linux,code = <KEY_UP>; + label = "Up"; wakeup-source; debounce-interval = <20>; }; - key-2 { + key-2 { /*S20 */ gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; - linux,code = <KEY_2>; - label = "Switch-2"; + linux,code = <KEY_LEFT>; + label = "Left"; wakeup-source; debounce-interval = <20>; }; - key-3 { + key-3 { /* S21 */ gpios = <&gpio5 17 GPIO_ACTIVE_LOW>; - linux,code = <KEY_3>; - label = "Switch-3"; + linux,code = <KEY_DOWN>; + label = "Down"; wakeup-source; debounce-interval = <20>; }; - key-4 { + key-4 { /* S22 */ gpios = <&gpio5 20 GPIO_ACTIVE_LOW>; - linux,code = <KEY_4>; - label = "Switch-4"; + linux,code = <KEY_RIGHT>; + label = "Right"; wakeup-source; debounce-interval = <20>; }; - key-5 { + key-5 { /* S23 */ gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; - linux,code = <KEY_5>; - label = "Switch-4"; + linux,code = <KEY_ENTER>; + label = "Center"; wakeup-source; debounce-interval = <20>; }; @@ -118,9 +119,9 @@ hback-porch = <40>; vfront-porch = <13>; vback-porch = <29>; - vsync-len = <3>; + vsync-len = <1>; hsync-active = <1>; - vsync-active = <1>; + vsync-active = <3>; de-active = <1>; pixelclk-active = <0>; }; @@ -135,7 +136,7 @@ rgb { /* Different LCD with compatible timings */ compatible = "rocktech,rk070er9427"; - backlight = <&backlight_rgb>; + backlight = <&backlight_dpi>; enable-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; power-supply = <®_lcd>; port { @@ -150,7 +151,7 @@ regulator-name = "audio-1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - gpio = <&gpio_exp2 7 GPIO_ACTIVE_HIGH>; + gpio = <&gpio_exp4 1 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -200,15 +201,12 @@ vccq_sdhi0: regulator-vccq-sdhi0 { compatible = "regulator-gpio"; - regulator-name = "SDHI0 VccQ"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; - gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>; gpios-states = <1>; states = <3300000 1>, <1800000 0>; - regulator-always-on; }; /* External DU dot clocks */ @@ -248,12 +246,6 @@ }; }; -&audio_clk_a { - clock-frequency = <24576000>; - assigned-clocks = <&versaclock6_bb 4>; - assigned-clock-rates = <24576000>; -}; - &audio_clk_b { clock-frequency = <22579200>; }; @@ -272,21 +264,6 @@ status = "okay"; }; -&du { - pinctrl-0 = <&du_pins>; - pinctrl-names = "default"; - status = "okay"; - - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&cpg CPG_MOD 722>, - <&versaclock5 1>, - <&x302_clk>, - <&versaclock5 2>; - clock-names = "du.0", "du.1", "du.2", - "dclkin.0", "dclkin.1", "dclkin.2"; -}; - &du_out_rgb { remote-endpoint = <&rgb_panel>; }; @@ -342,7 +319,7 @@ &i2c2 { status = "okay"; - clock-frequency = <100000>; + clock-frequency = <400000>; pinctrl-0 = <&i2c2_pins>; pinctrl-names = "default"; @@ -373,12 +350,36 @@ #clock-cells = <1>; clocks = <&x304_clk>; clock-names = "xin"; - /* CSI0_MCLK, CSI1_MCLK, AUDIO_CLKIN, USB_HUB_MCLK_BB */ + assigned-clocks = <&versaclock6_bb 1>, <&versaclock6_bb 2>, <&versaclock6_bb 3>, <&versaclock6_bb 4>; assigned-clock-rates = <24000000>, <24000000>, <24000000>, <24576000>; + + OUT1 { + idt,mode = <VC5_CMOS>; + idt,voltage-microvolt = <1800000>; + idt,slew-percent = <100>; + }; + + OUT2 { + idt,mode = <VC5_CMOS>; + idt,voltage-microvolt = <1800000>; + idt,slew-percent = <100>; + }; + + OUT3 { + idt,mode = <VC5_CMOS>; + idt,voltage-microvolt = <3300000>; + idt,slew-percent = <100>; + }; + + OUT4 { + idt,mode = <VC5_CMOS>; + idt,voltage-microvolt = <3300000>; + idt,slew-percent = <100>; + }; }; }; @@ -392,13 +393,14 @@ &i2c5 { status = "okay"; - clock-frequency = <100000>; + clock-frequency = <400000>; pinctrl-0 = <&i2c5_pins>; pinctrl-names = "default"; codec: wm8962@1a { compatible = "wlf,wm8962"; reg = <0x1a>; + clocks = <&versaclock6_bb 3>; DCVDD-supply = <®_audio>; DBVDD-supply = <®_audio>; AVDD-supply = <®_audio>; @@ -481,6 +483,13 @@ }; }; +&msiof1 { + pinctrl-0 = <&msiof1_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&gpio3 10 GPIO_ACTIVE_LOW>; +}; + &ohci0 { dr_mode = "otg"; status = "okay"; @@ -534,6 +543,11 @@ bias-pull-down; }; + msiof1_pins: msiof1 { + groups = "msiof1_clk_g", "msiof1_rxd_g", "msiof1_txd_g"; + function = "msiof1"; + }; + pwm0_pins: pwm0 { groups = "pwm0"; function = "pwm0"; @@ -541,7 +555,7 @@ pwm2_pins: pwm2 { groups = "pwm2_a"; - function = "pwm2_a"; + function = "pwm2"; }; sdhi0_pins: sd0 { @@ -562,7 +576,7 @@ }; sound_clk_pins: sound_clk { - groups = "audio_clk_a_a"; + groups = "audio_clk_a_a", "audio_clk_b_a"; function = "audio_clk"; }; @@ -613,23 +627,6 @@ status = "okay"; - clocks = <&cpg CPG_MOD 1005>, - <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, - <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, - <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, - <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, - <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, - <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, - <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, - <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, - <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, - <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, - <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, - <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, - <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, - <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, - <&cpg CPG_CORE R8A774A1_CLK_S0D4>; - ports { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi index 8ac167aa18f0..8d3a4d6ee885 100644 --- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi @@ -4,6 +4,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clk/versaclock.h> / { memory@48000000 { @@ -12,11 +13,6 @@ reg = <0x0 0x48000000 0x0 0x78000000>; }; - memory@600000000 { - device_type = "memory"; - reg = <0x6 0x00000000 0x0 0x80000000>; - }; - osc_32k: osc_32k { compatible = "fixed-clock"; #clock-cells = <0>; @@ -89,7 +85,6 @@ pinctrl-names = "default"; uart-has-rtscts; status = "okay"; - max-speed = <4000000>; bluetooth { compatible = "brcm,bcm43438-bt"; @@ -98,6 +93,7 @@ device-wakeup-gpios = <&pca9654 5 GPIO_ACTIVE_HIGH>; clocks = <&osc_32k>; clock-names = "extclk"; + max-speed = <4000000>; }; }; @@ -109,7 +105,7 @@ &i2c4 { status = "okay"; - clock-frequency = <400000>; + clock-frequency = <100000>; pca9654: gpio@20 { compatible = "onnn,pca9654"; @@ -148,7 +144,7 @@ }; eeprom@50 { - compatible = "microchip,at24c64", "atmel,24c64"; + compatible = "microchip,24c64", "atmel,24c64"; pagesize = <32>; read-only; /* Manufacturing EEPROM programmed at factory */ reg = <0x50>; @@ -170,7 +166,32 @@ <&versaclock5 2>, <&versaclock5 3>, <&versaclock5 4>; + assigned-clock-rates = <33333333>, <33333333>, <50000000>, <125000000>; + + OUT1 { + idt,mode = <VC5_CMOS>; + idt,voltage-microvolt = <1800000>; + idt,slew-percent = <100>; + }; + + OUT2 { + idt,mode = <VC5_CMOS>; + idt,voltage-microvolt = <1800000>; + idt,slew-percent = <100>; + }; + + OUT3 { + idt,mode = <VC5_CMOS>; + idt,voltage-microvolt = <1800000>; + idt,slew-percent = <100>; + }; + + OUT4 { + idt,mode = <VC5_CMOS>; + idt,voltage-microvolt = <3300000>; + idt,slew-percent = <100>; + }; }; }; @@ -291,6 +312,8 @@ vqmmc-supply = <®_1p8v>; bus-width = <8>; mmc-hs200-1_8v; + no-sd; + no-sdio; non-removable; fixed-emmc-driver-type = <1>; status = "okay"; @@ -303,11 +326,3 @@ &usb3s0_clk { clock-frequency = <100000000>; }; - -&vspb { - status = "okay"; -}; - -&vspi0 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi index 2eda9f66ae81..7a3da9b06f67 100644 --- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi @@ -328,6 +328,8 @@ vqmmc-supply = <®_1p8v>; bus-width = <8>; mmc-hs200-1_8v; + no-sd; + no-sdio; non-removable; fixed-emmc-driver-type = <1>; status = "okay"; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts b/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts index 2c5b057c30c6..501cb05da228 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts +++ b/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts @@ -26,4 +26,45 @@ chosen { stdout-path = "serial0:115200n8"; }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x80000000>; + }; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&versaclock5 1>, + <&x302_clk>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.2", + "dclkin.0", "dclkin.1", "dclkin.2"; +}; + +/* Reference versaclock instead of audio_clk_a */ +&rcar_sound { + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&versaclock6_bb 4>, <&audio_clk_b>, + <&audio_clk_c>, + <&cpg CPG_CORE R8A774A1_CLK_S0D4>; }; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index d37ec42a1caa..d64fb8b1b86c 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -835,6 +835,21 @@ status = "disabled"; }; + usb2_clksel: clock-controller@e6590630 { + compatible = "renesas,r8a774a1-rcar-usb2-clock-sel", + "renesas,rcar-gen3-usb2-clock-sel"; + reg = <0 0xe6590630 0 0x02>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, + <&usb_extal_clk>, <&usb3s0_clk>; + clock-names = "ehci_ohci", "hs-usb-if", + "usb_extal", "usb_xtal"; + #clock-cells = <0>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + reset-names = "ehci_ohci", "hs-usb-if"; + status = "disabled"; + }; + usb_dmac0: dma-controller@e65a0000 { compatible = "renesas,r8a774a1-usb-dmac", "renesas,usb-dmac"; @@ -2302,6 +2317,23 @@ status = "disabled"; }; + rpc: spi@ee200000 { + compatible = "renesas,r8a774a1-rpc-if", + "renesas,rcar-gen3-rpc-if"; + reg = <0 0xee200000 0 0x200>, + <0 0x08000000 0 0x4000000>, + <0 0xee208000 0 0x100>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + clock-names = "rpc"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 917>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@f1010000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts b/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts new file mode 100644 index 000000000000..71763f4402a7 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts @@ -0,0 +1,66 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2020, Compass Electronics Group, LLC + */ + +/dts-v1/; + +#include "r8a774b1.dtsi" +#include "beacon-renesom-som.dtsi" +#include "beacon-renesom-baseboard.dtsi" + +/ { + model = "Beacon Embedded Works RZ/G2N Development Kit"; + compatible = "beacon,beacon-rzg2n", "renesas,r8a774b1"; + + aliases { + serial0 = &scif2; + serial1 = &hscif0; + serial2 = &hscif1; + serial3 = &scif0; + serial4 = &hscif2; + serial5 = &scif5; + serial6 = &scif4; + ethernet0 = &avb; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 721>, + <&versaclock5 1>, + <&x302_clk>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.3", + "dclkin.0", "dclkin.1", "dclkin.3"; +}; + +/* Reference versaclock instead of audio_clk_a */ +&rcar_sound { + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&versaclock6_bb 4>, <&audio_clk_b>, + <&audio_clk_c>, + <&cpg CPG_CORE R8A774B1_CLK_S0D4>; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi index 83523916d360..5b05474dc272 100644 --- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi @@ -709,6 +709,21 @@ status = "disabled"; }; + usb2_clksel: clock-controller@e6590630 { + compatible = "renesas,r8a774b1-rcar-usb2-clock-sel", + "renesas,rcar-gen3-usb2-clock-sel"; + reg = <0 0xe6590630 0 0x02>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, + <&usb_extal_clk>, <&usb3s0_clk>; + clock-names = "ehci_ohci", "hs-usb-if", + "usb_extal", "usb_xtal"; + #clock-cells = <0>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + reset-names = "ehci_ohci", "hs-usb-if"; + status = "disabled"; + }; + usb_dmac0: dma-controller@e65a0000 { compatible = "renesas,r8a774b1-usb-dmac", "renesas,usb-dmac"; @@ -2160,6 +2175,23 @@ status = "disabled"; }; + rpc: spi@ee200000 { + compatible = "renesas,r8a774b1-rpc-if", + "renesas,rcar-gen3-rpc-if"; + reg = <0 0xee200000 0 0x200>, + <0 0x08000000 0 0x4000000>, + <0 0xee208000 0 0x100>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + clock-names = "rpc"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 917>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + sata: sata@ee300000 { compatible = "renesas,sata-r8a774b1", "renesas,rcar-gen3-sata"; diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index e0e54342cd4c..20fa3caa050e 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -1654,6 +1654,23 @@ status = "disabled"; }; + rpc: spi@ee200000 { + compatible = "renesas,r8a774c0-rpc-if", + "renesas,rcar-gen3-rpc-if"; + reg = <0 0xee200000 0 0x200>, + <0 0x08000000 0 0x4000000>, + <0 0xee208000 0 0x100>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + clock-names = "rpc"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 917>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@f1010000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; diff --git a/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts b/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts new file mode 100644 index 000000000000..273f062f2909 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2020, Compass Electronics Group, LLC + */ + +/dts-v1/; + +#include "r8a774e1.dtsi" +#include "beacon-renesom-som.dtsi" +#include "beacon-renesom-baseboard.dtsi" + +/ { + model = "Beacon Embedded Works RZ/G2H Development Kit"; + compatible = "beacon,beacon-rzg2h", "renesas,r8a774e1"; + + aliases { + serial0 = &scif2; + serial1 = &hscif0; + serial2 = &hscif1; + serial3 = &scif0; + serial4 = &hscif2; + serial5 = &scif5; + serial6 = &scif4; + ethernet0 = &avb; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@500000000 { + device_type = "memory"; + reg = <0x5 0x00000000 0x0 0x80000000>; + }; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 721>, + <&versaclock5 1>, + <&x302_clk>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.3", + "dclkin.0", "dclkin.1", "dclkin.3"; +}; + +/* Reference versaclock instead of audio_clk_a */ +&rcar_sound { + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&versaclock6_bb 4>, <&audio_clk_b>, + <&audio_clk_c>, + <&cpg CPG_CORE R8A774E1_CLK_S0D4>; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi index 1333b02d623a..8eb006cbd9af 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -890,6 +890,21 @@ status = "disabled"; }; + usb2_clksel: clock-controller@e6590630 { + compatible = "renesas,r8a774e1-rcar-usb2-clock-sel", + "renesas,rcar-gen3-usb2-clock-sel"; + reg = <0 0xe6590630 0 0x02>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, + <&usb_extal_clk>, <&usb3s0_clk>; + clock-names = "ehci_ohci", "hs-usb-if", + "usb_extal", "usb_xtal"; + #clock-cells = <0>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + reset-names = "ehci_ohci", "hs-usb-if"; + status = "disabled"; + }; + usb_dmac0: dma-controller@e65a0000 { compatible = "renesas,r8a774e1-usb-dmac", "renesas,usb-dmac"; @@ -2393,6 +2408,23 @@ status = "disabled"; }; + rpc: spi@ee200000 { + compatible = "renesas,r8a774e1-rpc-if", + "renesas,rcar-gen3-rpc-if"; + reg = <0 0xee200000 0 0x200>, + <0 0x08000000 0 0x4000000>, + <0 0xee208000 0 0x100>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + clock-names = "rpc"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 917>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + sata: sata@ee300000 { compatible = "renesas,sata-r8a774e1", "renesas,rcar-gen3-sata"; diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi index 9d60bcf69e4f..5c39152e4570 100644 --- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi @@ -616,6 +616,71 @@ resets = <&cpg 407>; }; + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a7795", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@e6fc0000 { + compatible = "renesas,tmu-r8a7795", "renesas,tmu"; + reg = <0 0xe6fc0000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + tmu2: timer@e6fd0000 { + compatible = "renesas,tmu-r8a7795", "renesas,tmu"; + reg = <0 0xe6fd0000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 123>; + clock-names = "fck"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 123>; + status = "disabled"; + }; + + tmu3: timer@e6fe0000 { + compatible = "renesas,tmu-r8a7795", "renesas,tmu"; + reg = <0 0xe6fe0000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu4: timer@ffc00000 { + compatible = "renesas,tmu-r8a7795", "renesas,tmu"; + reg = <0 0xffc00000 0 0x30>; + interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + i2c0: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi index 53b9aa26c9b1..25d947a81b29 100644 --- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi @@ -585,6 +585,71 @@ resets = <&cpg 407>; }; + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a7796", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@e6fc0000 { + compatible = "renesas,tmu-r8a7796", "renesas,tmu"; + reg = <0 0xe6fc0000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + tmu2: timer@e6fd0000 { + compatible = "renesas,tmu-r8a7796", "renesas,tmu"; + reg = <0 0xe6fd0000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 123>; + clock-names = "fck"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 123>; + status = "disabled"; + }; + + tmu3: timer@e6fe0000 { + compatible = "renesas,tmu-r8a7796", "renesas,tmu"; + reg = <0 0xe6fe0000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu4: timer@ffc00000 { + compatible = "renesas,tmu-r8a7796", "renesas,tmu"; + reg = <0 0xffc00000 0 0x30>; + interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + i2c0: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi index 4b737c616257..e8c31ebec097 100644 --- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi @@ -453,6 +453,76 @@ reg = <0 0xe6060000 0 0x50c>; }; + cmt0: timer@e60f0000 { + compatible = "renesas,r8a77961-cmt0", + "renesas,rcar-gen3-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 303>; + clock-names = "fck"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 303>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a77961-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 302>; + clock-names = "fck"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 302>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a77961-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 301>; + clock-names = "fck"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 301>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a77961-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 300>; + clock-names = "fck"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a77961-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -495,6 +565,71 @@ /* placeholder */ }; + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a77961", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@e6fc0000 { + compatible = "renesas,tmu-r8a77961", "renesas,tmu"; + reg = <0 0xe6fc0000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + tmu2: timer@e6fd0000 { + compatible = "renesas,tmu-r8a77961", "renesas,tmu"; + reg = <0 0xe6fd0000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 123>; + clock-names = "fck"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 123>; + status = "disabled"; + }; + + tmu3: timer@e6fe0000 { + compatible = "renesas,tmu-r8a77961", "renesas,tmu"; + reg = <0 0xe6fe0000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu4: timer@ffc00000 { + compatible = "renesas,tmu-r8a77961", "renesas,tmu"; + reg = <0 0xffc00000 0 0x30>; + interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + i2c0: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index 4a913df17b1d..657b20d3533b 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -455,6 +455,71 @@ resets = <&cpg 407>; }; + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a77965", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@e6fc0000 { + compatible = "renesas,tmu-r8a77965", "renesas,tmu"; + reg = <0 0xe6fc0000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + tmu2: timer@e6fd0000 { + compatible = "renesas,tmu-r8a77965", "renesas,tmu"; + reg = <0 0xe6fd0000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 123>; + clock-names = "fck"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 123>; + status = "disabled"; + }; + + tmu3: timer@e6fe0000 { + compatible = "renesas,tmu-r8a77965", "renesas,tmu"; + reg = <0 0xe6fe0000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu4: timer@ffc00000 { + compatible = "renesas,tmu-r8a77965", "renesas,tmu"; + reg = <0 0xffc00000 0 0x30>; + interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + i2c0: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts index 422ec53740cb..04d47c0c9bb9 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts @@ -217,6 +217,8 @@ vqmmc-supply = <&vddq_vin01>; mmc-hs200-1_8v; bus-width = <8>; + no-sd; + no-sdio; non-removable; status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts index e0ccca2222d2..f74f8b9993f1 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts @@ -712,6 +712,8 @@ mmc-hs200-1_8v; mmc-hs400-1_8v; bus-width = <8>; + no-sd; + no-sdio; non-removable; full-pwr-cycle-in-suspend; status = "okay"; diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index 87d41bc076a9..5010f23fafcc 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -420,6 +420,71 @@ resets = <&cpg 407>; }; + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a77990", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@e6fc0000 { + compatible = "renesas,tmu-r8a77990", "renesas,tmu"; + reg = <0 0xe6fc0000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + tmu2: timer@e6fd0000 { + compatible = "renesas,tmu-r8a77990", "renesas,tmu"; + reg = <0 0xe6fd0000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 123>; + clock-names = "fck"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 123>; + status = "disabled"; + }; + + tmu3: timer@e6fe0000 { + compatible = "renesas,tmu-r8a77990", "renesas,tmu"; + reg = <0 0xe6fe0000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu4: timer@ffc00000 { + compatible = "renesas,tmu-r8a77990", "renesas,tmu"; + reg = <0 0xffc00000 0 0x30>; + interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + i2c0: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index 8f471881b7a3..6783c3ad0856 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts @@ -496,6 +496,8 @@ vqmmc-supply = <®_1p8v>; bus-width = <8>; mmc-hs200-1_8v; + no-sd; + no-sdio; non-removable; status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index e1af7c4782f4..2319271c881b 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -193,6 +193,76 @@ reg = <0 0xe6060000 0 0x508>; }; + cmt0: timer@e60f0000 { + compatible = "renesas,r8a77995-cmt0", + "renesas,rcar-gen3-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 303>; + clock-names = "fck"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 303>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a77995-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 302>; + clock-names = "fck"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 302>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a77995-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 301>; + clock-names = "fck"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 301>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a77995-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 300>; + clock-names = "fck"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a77995-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -242,6 +312,71 @@ resets = <&cpg 407>; }; + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a77995", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@e6fc0000 { + compatible = "renesas,tmu-r8a77995", "renesas,tmu"; + reg = <0 0xe6fc0000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + tmu2: timer@e6fd0000 { + compatible = "renesas,tmu-r8a77995", "renesas,tmu"; + reg = <0 0xe6fd0000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 123>; + clock-names = "fck"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 123>; + status = "disabled"; + }; + + tmu3: timer@e6fe0000 { + compatible = "renesas,tmu-r8a77995", "renesas,tmu"; + reg = <0 0xe6fe0000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu4: timer@ffc00000 { + compatible = "renesas,tmu-r8a77995", "renesas,tmu"; + reg = <0 0xffc00000 0 0x30>; + interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + i2c0: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi index 4ba269a4cec8..fa284a7260d6 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi @@ -5,6 +5,7 @@ * Copyright (C) 2020 Renesas Electronics Corp. */ +#include <dt-bindings/gpio/gpio.h> #include "r8a779a0.dtsi" / { @@ -31,6 +32,40 @@ device_type = "memory"; reg = <0x7 0x00000000 0x0 0x80000000>; }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&avb0 { + pinctrl-0 = <&avb0_pins>; + pinctrl-names = "default"; + phy-handle = <&phy0>; + tx-internal-delay-ps = <2000>; + status = "okay"; + + phy0: ethernet-phy@0 { + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio4>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; + }; }; &extal_clk { @@ -41,6 +76,109 @@ clock-frequency = <32768>; }; +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; +}; + +&i2c6 { + pinctrl-0 = <&i2c6_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; +}; + +&mmc0 { + pinctrl-0 = <&mmc_pins>; + pinctrl-1 = <&mmc_pins>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + full-pwr-cycle-in-suspend; + status = "okay"; +}; + +&pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + avb0_pins: avb0 { + mux { + groups = "avb0_link", "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk"; + function = "avb0"; + }; + + pins_mdio { + groups = "avb0_mdio"; + drive-strength = <21>; + }; + + pins_mii { + groups = "avb0_rgmii"; + drive-strength = <21>; + }; + + }; + + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + i2c1_pins: i2c1 { + groups = "i2c1"; + function = "i2c1"; + }; + + i2c6_pins: i2c6 { + groups = "i2c6"; + function = "i2c6"; + }; + + mmc_pins: mmc { + groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; + function = "mmc"; + power-source = <1800>; + }; + + scif0_pins: scif0 { + groups = "scif0_data", "scif0_ctrl"; + function = "scif0"; + }; + + scif_clk_pins: scif_clk { + groups = "scif_clk"; + function = "scif_clk"; + }; +}; + &scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; status = "okay"; }; + +&scif_clk { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts index 8eda70e5a82b..5617b81dd7dc 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts @@ -13,6 +13,7 @@ compatible = "renesas,falcon-breakout", "renesas,falcon-cpu", "renesas,r8a779a0"; aliases { + ethernet0 = &avb0; serial0 = &scif0; }; @@ -20,3 +21,8 @@ stdout-path = "serial0:115200n8"; }; }; + +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi index 6cf77ce9aa93..dfd6ae8b564f 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi @@ -14,6 +14,16 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -70,6 +80,165 @@ #size-cells = <2>; ranges; + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a779a0-wdt", + "renesas,rcar-gen3-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 907>; + status = "disabled"; + }; + + pfc: pin-controller@e6050000 { + compatible = "renesas,pfc-r8a779a0"; + reg = <0 0xe6050000 0 0x16c>, <0 0xe6050800 0 0x16c>, + <0 0xe6058000 0 0x16c>, <0 0xe6058800 0 0x16c>, + <0 0xe6060000 0 0x16c>, <0 0xe6060800 0 0x16c>, + <0 0xe6068000 0 0x16c>, <0 0xe6068800 0 0x16c>, + <0 0xe6069000 0 0x16c>, <0 0xe6069800 0 0x16c>; + }; + + gpio0: gpio@e6058180 { + compatible = "renesas,gpio-r8a779a0"; + reg = <0 0xe6058180 0 0x54>; + interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 916>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 0 28>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@e6050180 { + compatible = "renesas,gpio-r8a779a0"; + reg = <0 0xe6050180 0 0x54>; + interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 915>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 32 31>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@e6050980 { + compatible = "renesas,gpio-r8a779a0"; + reg = <0 0xe6050980 0 0x54>; + interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 915>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 64 25>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@e6058980 { + compatible = "renesas,gpio-r8a779a0"; + reg = <0 0xe6058980 0 0x54>; + interrupts = <GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 916>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 96 17>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@e6060180 { + compatible = "renesas,gpio-r8a779a0"; + reg = <0 0xe6060180 0 0x54>; + interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 917>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 128 27>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@e6060980 { + compatible = "renesas,gpio-r8a779a0"; + reg = <0 0xe6060980 0 0x54>; + interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 917>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 160 21>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio6: gpio@e6068180 { + compatible = "renesas,gpio-r8a779a0"; + reg = <0 0xe6068180 0 0x54>; + interrupts = <GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 918>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 918>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 192 21>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio7: gpio@e6068980 { + compatible = "renesas,gpio-r8a779a0"; + reg = <0 0xe6068980 0 0x54>; + interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 918>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 918>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 224 21>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio8: gpio@e6069180 { + compatible = "renesas,gpio-r8a779a0"; + reg = <0 0xe6069180 0 0x54>; + interrupts = <GIC_SPI 864 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 918>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 918>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 256 21>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio9: gpio@e6069980 { + compatible = "renesas,gpio-r8a779a0"; + reg = <0 0xe6069980 0 0x54>; + interrupts = <GIC_SPI 868 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 918>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 918>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 288 21>; + interrupt-controller; + #interrupt-cells = <2>; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a779a0-cpg-mssr"; reg = <0 0xe6150000 0 0x4000>; @@ -91,6 +260,464 @@ #power-domain-cells = <1>; }; + i2c0: i2c@e6500000 { + compatible = "renesas,i2c-r8a779a0", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6500000 0 0x40>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 518>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 518>; + dmas = <&dmac1 0x91>, <&dmac1 0x90>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + compatible = "renesas,i2c-r8a779a0", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 519>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 519>; + dmas = <&dmac1 0x93>, <&dmac1 0x92>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + compatible = "renesas,i2c-r8a779a0", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6510000 0 0x40>; + interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 520>; + dmas = <&dmac1 0x95>, <&dmac1 0x94>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + compatible = "renesas,i2c-r8a779a0", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 521>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 521>; + dmas = <&dmac1 0x97>, <&dmac1 0x96>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@e66d8000 { + compatible = "renesas,i2c-r8a779a0", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d8000 0 0x40>; + interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 522>; + dmas = <&dmac1 0x99>, <&dmac1 0x98>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@e66e0000 { + compatible = "renesas,i2c-r8a779a0", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e0000 0 0x40>; + interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 523>; + dmas = <&dmac1 0x9b>, <&dmac1 0x9a>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@e66e8000 { + compatible = "renesas,i2c-r8a779a0", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e8000 0 0x40>; + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 524>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 524>; + dmas = <&dmac1 0x9d>, <&dmac1 0x9c>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a779a0", + "renesas,rcar-gen3-hscif", "renesas,hscif"; + reg = <0 0xe6540000 0 0x60>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 514>, + <&cpg CPG_CORE R8A779A0_CLK_S1D2>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 514>; + status = "disabled"; + }; + + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a779a0", + "renesas,rcar-gen3-hscif", "renesas,hscif"; + reg = <0 0xe6550000 0 0x60>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 515>, + <&cpg CPG_CORE R8A779A0_CLK_S1D2>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x33>, <&dmac1 0x32>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 515>; + status = "disabled"; + }; + + hscif2: serial@e6560000 { + compatible = "renesas,hscif-r8a779a0", + "renesas,rcar-gen3-hscif", "renesas,hscif"; + reg = <0 0xe6560000 0 0x60>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 516>, + <&cpg CPG_CORE R8A779A0_CLK_S1D2>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x35>, <&dmac1 0x34>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 516>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a779a0", + "renesas,rcar-gen3-hscif", "renesas,hscif"; + reg = <0 0xe66a0000 0 0x60>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE R8A779A0_CLK_S1D2>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x37>, <&dmac1 0x36>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 517>; + status = "disabled"; + }; + + avb0: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a779a0", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6800000 0 0x800>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 211>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 211>; + phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + avb1: ethernet@e6810000 { + compatible = "renesas,etheravb-r8a779a0", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6810000 0 0x800>; + interrupts = <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 212>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 212>; + phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + avb2: ethernet@e6820000 { + compatible = "renesas,etheravb-r8a779a0", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6820000 0 0x1000>; + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 213>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 213>; + phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + avb3: ethernet@e6830000 { + compatible = "renesas,etheravb-r8a779a0", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6830000 0 0x1000>; + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 214>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 214>; + phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + avb4: ethernet@e6840000 { + compatible = "renesas,etheravb-r8a779a0", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6840000 0 0x1000>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 215>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 215>; + phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + avb5: ethernet@e6850000 { + compatible = "renesas,etheravb-r8a779a0", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6850000 0 0x1000>; + interrupts = <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 216>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 216>; + phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + scif0: serial@e6e60000 { compatible = "renesas,scif-r8a779a0", "renesas,rcar-gen3-scif", "renesas,scif"; @@ -100,11 +727,221 @@ <&cpg CPG_CORE R8A779A0_CLK_S1D2>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x51>, <&dmac1 0x50>; + dma-names = "tx", "rx"; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; resets = <&cpg 702>; status = "disabled"; }; + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a779a0", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 64>; + interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>, + <&cpg CPG_CORE R8A779A0_CLK_S1D2>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x53>, <&dmac1 0x52>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + }; + + scif3: serial@e6c50000 { + compatible = "renesas,scif-r8a779a0", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c50000 0 64>; + interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 704>, + <&cpg CPG_CORE R8A779A0_CLK_S1D2>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x57>, <&dmac1 0x56>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 704>; + status = "disabled"; + }; + + scif4: serial@e6c40000 { + compatible = "renesas,scif-r8a779a0", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c40000 0 64>; + interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 705>, + <&cpg CPG_CORE R8A779A0_CLK_S1D2>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x59>, <&dmac1 0x58>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 705>; + status = "disabled"; + }; + + msiof0: spi@e6e90000 { + compatible = "renesas,msiof-r8a779a0", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6e90000 0 0x0064>; + interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 618>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 618>; + dmas = <&dmac1 0x41>, <&dmac1 0x40>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6ea0000 { + compatible = "renesas,msiof-r8a779a0", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6ea0000 0 0x0064>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 619>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 619>; + dmas = <&dmac1 0x43>, <&dmac1 0x42>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6c00000 { + compatible = "renesas,msiof-r8a779a0", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c00000 0 0x0064>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 620>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 620>; + dmas = <&dmac1 0x45>, <&dmac1 0x44>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof3: spi@e6c10000 { + compatible = "renesas,msiof-r8a779a0", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c10000 0 0x0064>; + interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 621>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 621>; + dmas = <&dmac1 0x47>, <&dmac1 0x46>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof4: spi@e6c20000 { + compatible = "renesas,msiof-r8a779a0", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c20000 0 0x0064>; + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 622>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 622>; + dmas = <&dmac1 0x49>, <&dmac1 0x48>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof5: spi@e6c28000 { + compatible = "renesas,msiof-r8a779a0", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c28000 0 0x0064>; + interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 623>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 623>; + dmas = <&dmac1 0x4b>, <&dmac1 0x4a>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + dmac1: dma-controller@e7350000 { + compatible = "renesas,dmac-r8a779a0"; + reg = <0 0xe7350000 0 0x1000>, + <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", "ch4", + "ch5", "ch6", "ch7", "ch8", "ch9", + "ch10", "ch11", "ch12", "ch13", + "ch14", "ch15"; + clocks = <&cpg CPG_MOD 709>; + clock-names = "fck"; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 709>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + dmac2: dma-controller@e7351000 { + compatible = "renesas,dmac-r8a779a0"; + reg = <0 0xe7351000 0 0x1000>, + <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", "ch4", + "ch5", "ch6", "ch7"; + clocks = <&cpg CPG_MOD 710>; + clock-names = "fck"; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 710>; + #dma-cells = <1>; + dma-channels = <8>; + }; + + mmc0: mmc@ee140000 { + compatible = "renesas,sdhi-r8a779a0", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee140000 0 0x2000>; + interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 706>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 706>; + max-frequency = <200000000>; + status = "disabled"; + }; + gic: interrupt-controller@f1000000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index 6c643ed74fc5..c22bb38994e8 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -831,6 +831,8 @@ bus-width = <8>; mmc-hs200-1_8v; mmc-hs400-1_8v; + no-sd; + no-sdio; non-removable; fixed-emmc-driver-type = <1>; full-pwr-cycle-in-suspend; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 8f8d7371d8e2..a04eae55dd6c 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -468,6 +468,8 @@ bus-width = <8>; mmc-hs200-1_8v; mmc-hs400-1_8v; + no-sd; + no-sdio; non-removable; full-pwr-cycle-in-suspend; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 1ab55a124a87..62d3abc17a24 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -11,6 +11,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb @@ -33,6 +34,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-kobol-helios64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-leez-p710.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4b.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index 64193292d26c..c45b0cfcae09 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -25,6 +25,9 @@ i2c1 = &i2c1; i2c2 = &i2c2; i2c3 = &i2c3; + mmc0 = &sdmmc; + mmc1 = &sdio; + mmc2 = &emmc; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -703,22 +706,15 @@ clock-names = "pclk", "timer"; }; - amba: bus { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - dmac: dmac@ff240000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xff240000 0x0 0x4000>; - interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - }; + dmac: dmac@ff240000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff240000 0x0 0x4000>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC>; + clock-names = "apb_pclk"; + #dma-cells = <1>; }; tsadc: tsadc@ff280000 { @@ -973,6 +969,21 @@ status = "disabled"; }; + nfc: nand-controller@ff3b0000 { + compatible = "rockchip,px30-nfc"; + reg = <0x0 0xff3b0000 0x0 0x4000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>; + clock-names = "ahb", "nfc"; + assigned-clocks = <&cru SCLK_NANDC>; + assigned-clock-rates = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_cs0 + &flash_rdn &flash_rdy &flash_wrn &flash_dqs>; + power-domains = <&power PX30_PD_MMC_NAND>; + status = "disabled"; + }; + gpu: gpu@ff400000 { compatible = "rockchip,px30-mali", "arm,mali-bifrost"; reg = <0x0 0xff400000 0x0 0x4000>; @@ -1107,102 +1118,102 @@ }; qos_gmac: qos@ff518000 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff518000 0x0 0x20>; }; qos_gpu: qos@ff520000 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff520000 0x0 0x20>; }; qos_sdmmc: qos@ff52c000 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff52c000 0x0 0x20>; }; qos_emmc: qos@ff538000 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff538000 0x0 0x20>; }; qos_nand: qos@ff538080 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff538080 0x0 0x20>; }; qos_sdio: qos@ff538100 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff538100 0x0 0x20>; }; qos_sfc: qos@ff538180 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff538180 0x0 0x20>; }; qos_usb_host: qos@ff540000 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff540000 0x0 0x20>; }; qos_usb_otg: qos@ff540080 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff540080 0x0 0x20>; }; qos_isp_128: qos@ff548000 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff548000 0x0 0x20>; }; qos_isp_rd: qos@ff548080 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff548080 0x0 0x20>; }; qos_isp_wr: qos@ff548100 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff548100 0x0 0x20>; }; qos_isp_m1: qos@ff548180 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff548180 0x0 0x20>; }; qos_vip: qos@ff548200 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff548200 0x0 0x20>; }; qos_rga_rd: qos@ff550000 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff550000 0x0 0x20>; }; qos_rga_wr: qos@ff550080 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff550080 0x0 0x20>; }; qos_vop_m0: qos@ff550100 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff550100 0x0 0x20>; }; qos_vop_m1: qos@ff550180 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff550180 0x0 0x20>; }; qos_vpu: qos@ff558000 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff558000 0x0 0x20>; }; qos_vpu_r128: qos@ff558080 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff558080 0x0 0x20>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi index 2560b98771ca..3a035a189450 100644 --- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi @@ -24,6 +24,9 @@ i2c1 = &i2c1; i2c2 = &i2c2; i2c3 = &i2c3; + mmc0 = &sdmmc; + mmc1 = &emmc; + mmc2 = &sdio; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -513,33 +516,26 @@ status = "disabled"; }; - amba: bus { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; + dmac0: dma-controller@ff2c0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff2c0000 0x0 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; - dmac0: dma-controller@ff2c0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xff2c0000 0x0 0x4000>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - }; - - dmac1: dma-controller@ff2d0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xff2d0000 0x0 0x4000>; - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - }; + dmac1: dma-controller@ff2d0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff2d0000 0x0 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; }; i2s_2ch_0: i2s@ff350000 { @@ -629,6 +625,21 @@ status = "disabled"; }; + nfc: nand-controller@ff4b0000 { + compatible = "rockchip,rk3308-nfc", + "rockchip,rv1108-nfc"; + reg = <0x0 0xff4b0000 0x0 0x4000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>; + clock-names = "ahb", "nfc"; + assigned-clocks = <&cru SCLK_NANDC>; + assigned-clock-rates = <150000000>; + pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_csn0 + &flash_rdn &flash_rdy &flash_wrn>; + pinctrl-names = "default"; + status = "disabled"; + }; + cru: clock-controller@ff500000 { compatible = "rockchip,rk3308-cru"; reg = <0x0 0xff500000 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts index 1eecad724f04..faf496d789cf 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts @@ -50,6 +50,7 @@ sys_led: led-1 { gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; label = "nanopi-r2s:red:sys"; + default-state = "on"; }; wan_led: led-2 { @@ -284,7 +285,7 @@ }; }; - ethernet-phy { + gmac2io { eth_phy_reset_pin: eth-phy-reset-pin { rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts new file mode 100644 index 000000000000..2d71ca7e429c --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts @@ -0,0 +1,382 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * (C) Copyright 2020 Chen-Yu Tsai <wens@csie.org> + * + * Based on ./rk3328-rock64.dts, which is + * + * Copyright (c) 2017 PINE64 + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> + +#include "rk3328.dtsi" + +/ { + model = "Radxa ROCK Pi E"; + compatible = "radxa,rockpi-e", "rockchip,rk3328"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1750000>; + + /* This button is unpopulated out of the factory. */ + button-recovery { + label = "Recovery"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <10000>; + }; + }; + + gmac_clkin: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac_clkin"; + #clock-cells = <0>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pin>; + pinctrl-names = "default"; + + led-0 { + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0m1_pin>; + regulator-name = "vcc_sd"; + regulator-boot-on; + vin-supply = <&vcc_io>; + }; + + vcc_host_5v: vcc-host-5v-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb30_host_drv>; + enable-active-high; + regulator-name = "vcc_host_5v"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc_wifi: vcc-wifi-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_en>; + regulator-name = "vcc_wifi"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_io>; + }; +}; + +&analog_sound { + status = "okay"; +}; + +&codec { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc18_emmc>; + status = "okay"; +}; + +&gmac2io { + assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; + assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>; + clock_in_out = "input"; + phy-handle = <&rtl8211e>; + phy-mode = "rgmii"; + phy-supply = <&vcc_io>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmiim1_pins>; + snps,aal; + snps,rxpbl = <0x4>; + snps,txpbl = <0x4>; + tx_delay = <0x26>; + rx_delay = <0x11>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + rtl8211e: ethernet-phy@1 { + reg = <1>; + pinctrl-0 = <ð_phy_int_pin>, <ð_phy_reset_pin>; + pinctrl-names = "default"; + interrupt-parent = <&gpio1>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <50000>; + reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gmac2phy { + pinctrl-names = "default"; + pinctrl-0 = <&fephyled_linkm1>, <&fephyled_rxm1>; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + rk805: pmic@18 { + compatible = "rockchip,rk805"; + reg = <0x18>; + interrupt-parent = <&gpio2>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk805-clkout2"; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_io>; + vcc6-supply = <&vcc_sys>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1450000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1450000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-name = "vcc_io"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_18: LDO_REG1 { + regulator-name = "vcc_18"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc18_emmc: LDO_REG2 { + regulator-name = "vcc18_emmc"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_10: LDO_REG3 { + regulator-name = "vdd_10"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + }; + }; +}; + +&i2s1 { + status = "okay"; +}; + +&io_domains { + pmuio-supply = <&vcc_io>; + vccio1-supply = <&vcc_io>; + vccio2-supply = <&vcc18_emmc>; + vccio3-supply = <&vcc_io>; + vccio4-supply = <&vcc_io>; + vccio5-supply = <&vcc_io>; + vccio6-supply = <&vcc_io>; + status = "okay"; +}; + +&pinctrl { + ephy { + eth_phy_int_pin: eth-phy-int-pin { + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + eth_phy_reset_pin: eth-phy-reset-pin { + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + leds { + led_pin: led-pin { + rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb3 { + usb30_host_drv: usb30-host-drv { + rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_en: wifi-en { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>; + vmmc-supply = <&vcc_sd>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_18>; + status = "okay"; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy { + status = "okay"; +}; + +&u2phy_host { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts index 86cfb5c50a94..c984662043da 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts @@ -84,34 +84,32 @@ }; }; - sound { - compatible = "audio-graph-card"; - label = "rockchip,rk3328"; - dais = <&i2s1_p0 - &spdif_p0>; + spdif_sound: spdif-sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "SPDIF"; + + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_dit>; + }; }; - spdif-dit { + spdif_dit: spdif-dit { compatible = "linux,spdif-dit"; #sound-dai-cells = <0>; - - port { - dit_p0_0: endpoint { - remote-endpoint = <&spdif_p0_0>; - }; - }; }; }; +&analog_sound { + status = "okay"; +}; + &codec { mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>; status = "okay"; - - port@0 { - codec_p0_0: endpoint { - remote-endpoint = <&i2s1_p0_0>; - }; - }; }; &cpu0 { @@ -163,6 +161,10 @@ status = "okay"; }; +&hdmi_sound { + status = "okay"; +}; + &hdmiphy { status = "okay"; }; @@ -278,16 +280,12 @@ }; }; -&i2s1 { +&i2s0 { status = "okay"; +}; - i2s1_p0: port { - i2s1_p0_0: endpoint { - dai-format = "i2s"; - mclk-fs = <256>; - remote-endpoint = <&codec_p0_0>; - }; - }; +&i2s1 { + status = "okay"; }; &io_domains { @@ -337,12 +335,6 @@ &spdif { pinctrl-0 = <&spdifm0_tx>; status = "okay"; - - spdif_p0: port { - spdif_p0_0: endpoint { - remote-endpoint = <&dit_p0_0>; - }; - }; }; &spi0 { diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index db0d5c8e5f96..063ed0adbec4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -27,6 +27,9 @@ i2c1 = &i2c1; i2c2 = &i2c2; i2c3 = &i2c3; + mmc0 = &sdmmc; + mmc1 = &sdio; + mmc2 = &emmc; ethernet0 = &gmac2io; ethernet1 = &gmac2phy; }; @@ -142,24 +145,6 @@ }; }; - amba: bus { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - dmac: dmac@ff1f0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xff1f0000 0x0 0x4000>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - }; - }; - analog_sound: analog-sound { compatible = "simple-audio-card"; simple-audio-card,format = "i2s"; @@ -504,6 +489,17 @@ status = "disabled"; }; + dmac: dmac@ff1f0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff1f0000 0x0 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + thermal-zones { soc_thermal: soc-thermal { polling-delay-passive = <20>; @@ -928,6 +924,7 @@ phy-mode = "rmii"; phy-handle = <&phy>; snps,txpbl = <0x4>; + clock_in_out = "output"; status = "disabled"; mdio { diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index 3746f23dc3df..7af68ec3feae 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -25,6 +25,9 @@ i2c3 = &i2c3; i2c4 = &i2c4; i2c5 = &i2c5; + mmc0 = &sdmmc; + mmc1 = &sdio0; + mmc2 = &emmc; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -136,37 +139,6 @@ }; }; - amba: bus { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - dmac_peri: dma-controller@ff250000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xff250000 0x0 0x4000>; - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - arm,pl330-broken-no-flushp; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC_PERI>; - clock-names = "apb_pclk"; - }; - - dmac_bus: dma-controller@ff600000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xff600000 0x0 0x4000>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - arm,pl330-broken-no-flushp; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC_BUS>; - clock-names = "apb_pclk"; - }; - }; - arm-pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, @@ -399,8 +371,20 @@ status = "disabled"; }; + dmac_peri: dma-controller@ff250000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff250000 0x0 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC_PERI>; + clock-names = "apb_pclk"; + }; + thermal-zones { - cpu { + cpu_thermal: cpu-thermal { polling-delay-passive = <100>; /* milliseconds */ polling-delay = <5000>; /* milliseconds */ @@ -444,7 +428,7 @@ }; }; - gpu { + gpu_thermal: gpu-thermal { polling-delay-passive = <100>; /* milliseconds */ polling-delay = <5000>; /* milliseconds */ @@ -532,6 +516,18 @@ status = "disabled"; }; + dmac_bus: dma-controller@ff600000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff600000 0x0 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC_BUS>; + clock-names = "apb_pclk"; + }; + i2c0: i2c@ff650000 { compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c"; reg = <0x0 0xff650000 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts index 2a561be724b2..66c725a34220 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts @@ -331,7 +331,7 @@ pmic { pmic_int_l: pmic-int-l { - rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts index e0d75617bb7e..452728b82e42 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts @@ -95,6 +95,7 @@ }; &pcie0 { + ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>; num-lanes = <4>; vpcie3v3-supply = <&vcc3v3_sys>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts new file mode 100644 index 000000000000..72182c58cc46 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * FriendlyElec NanoPi M4B board device tree source + * + * Copyright (c) 2020 Chen-Yu Tsai <wens@csie.org> + */ + +/dts-v1/; +#include "rk3399-nanopi-m4.dts" + +/ { + model = "FriendlyElec NanoPi M4B"; + compatible = "friendlyarm,nanopi-m4b", "rockchip,rk3399"; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1500000>; + poll-interval = <100>; + + recovery { + label = "Recovery"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <18000>; + }; + }; +}; + +/* No USB type-C PD power manager */ +/delete-node/ &fusb0; + +&i2c4 { + status = "disabled"; +}; + +&u2phy0_host { + phy-supply = <&vcc5v0_usb2>; +}; + +&u2phy0_otg { + phy-supply = <&vbus_typec>; +}; + +&u2phy1_otg { + phy-supply = <&vcc5v0_usb1>; +}; + +&vbus_typec { + enable-active-high; + gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi index 76a8b40a93c6..48ed4aaa37f3 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi @@ -504,7 +504,6 @@ }; &pcie0 { - ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>; max-link-speed = <2>; num-lanes = <2>; vpcie0v9-supply = <&vcca0v9_s3>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts index c88295782e7b..1a23e8f3cdf6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts @@ -63,6 +63,20 @@ }; +&cpu_alert0 { + temperature = <65000>; +}; + +&cpu_thermal { + sustainable-power = <1550>; + + cooling-maps { + map0 { + trip = <&cpu_alert1>; + }; + }; +}; + &pcie0 { ep-gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>; }; @@ -125,45 +139,6 @@ status = "okay"; }; -&thermal_zones { - cpu_thermal: cpu { - polling-delay-passive = <100>; - polling-delay = <1000>; - thermal-sensors = <&tsadc 0>; - sustainable-power = <1550>; - - trips { - cpu_alert0: cpu_alert0 { - temperature = <65000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu_alert1: cpu_alert1 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu_crit: cpu_crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - - trip = <&cpu_alert1>; - cooling-device = - <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; -}; - &usbdrd_dwc3_0 { dr_mode = "otg"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi index 6e553ff47534..5ab0b9edfc88 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi @@ -72,10 +72,27 @@ sound { compatible = "audio-graph-card"; - label = "rockchip,rk3399"; + label = "Analog"; dais = <&i2s1_p0>; }; + sound-dit { + compatible = "audio-graph-card"; + label = "SPDIF"; + dais = <&spdif_p0>; + }; + + spdif-dit { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + + port { + dit_p0_0: endpoint { + remote-endpoint = <&spdif_p0_0>; + }; + }; + }; + vcc12v_dcin: vcc12v-dcin { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; @@ -698,6 +715,16 @@ status = "okay"; }; +&spdif { + pinctrl-0 = <&spdif_bus_1>; + + spdif_p0: port { + spdif_p0_0: endpoint { + remote-endpoint = <&dit_p0_0>; + }; + }; +}; + &spi1 { status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 2551b238b97c..edbbf35fe19e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -200,35 +200,6 @@ #clock-cells = <0>; }; - amba: bus { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - dmac_bus: dma-controller@ff6d0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xff6d0000 0x0 0x4000>; - interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>; - #dma-cells = <1>; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC0_PERILP>; - clock-names = "apb_pclk"; - }; - - dmac_peri: dma-controller@ff6e0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xff6e0000 0x0 0x4000>; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>; - #dma-cells = <1>; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC1_PERILP>; - clock-names = "apb_pclk"; - }; - }; - pcie0: pcie@f8000000 { compatible = "rockchip,rk3399-pcie"; reg = <0x0 0xf8000000 0x0 0x2000000>, @@ -259,8 +230,8 @@ <&pcie_phy 2>, <&pcie_phy 3>; phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3"; - ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000 - 0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>; + ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000>, + <0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>; resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>, <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, @@ -764,7 +735,7 @@ }; thermal_zones: thermal-zones { - cpu_thermal: cpu { + cpu_thermal: cpu-thermal { polling-delay-passive = <100>; polling-delay = <1000>; @@ -808,7 +779,7 @@ }; }; - gpu_thermal: gpu { + gpu_thermal: gpu-thermal { polling-delay-passive = <100>; polling-delay = <1000>; @@ -858,127 +829,127 @@ }; qos_emmc: qos@ffa58000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa58000 0x0 0x20>; }; qos_gmac: qos@ffa5c000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa5c000 0x0 0x20>; }; qos_pcie: qos@ffa60080 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa60080 0x0 0x20>; }; qos_usb_host0: qos@ffa60100 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa60100 0x0 0x20>; }; qos_usb_host1: qos@ffa60180 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa60180 0x0 0x20>; }; qos_usb_otg0: qos@ffa70000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa70000 0x0 0x20>; }; qos_usb_otg1: qos@ffa70080 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa70080 0x0 0x20>; }; qos_sd: qos@ffa74000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa74000 0x0 0x20>; }; qos_sdioaudio: qos@ffa76000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa76000 0x0 0x20>; }; qos_hdcp: qos@ffa90000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa90000 0x0 0x20>; }; qos_iep: qos@ffa98000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa98000 0x0 0x20>; }; qos_isp0_m0: qos@ffaa0000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffaa0000 0x0 0x20>; }; qos_isp0_m1: qos@ffaa0080 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffaa0080 0x0 0x20>; }; qos_isp1_m0: qos@ffaa8000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffaa8000 0x0 0x20>; }; qos_isp1_m1: qos@ffaa8080 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffaa8080 0x0 0x20>; }; qos_rga_r: qos@ffab0000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffab0000 0x0 0x20>; }; qos_rga_w: qos@ffab0080 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffab0080 0x0 0x20>; }; qos_video_m0: qos@ffab8000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffab8000 0x0 0x20>; }; qos_video_m1_r: qos@ffac0000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffac0000 0x0 0x20>; }; qos_video_m1_w: qos@ffac0080 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffac0080 0x0 0x20>; }; qos_vop_big_r: qos@ffac8000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffac8000 0x0 0x20>; }; qos_vop_big_w: qos@ffac8080 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffac8080 0x0 0x20>; }; qos_vop_little: qos@ffad0000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffad0000 0x0 0x20>; }; qos_perihp: qos@ffad8080 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffad8080 0x0 0x20>; }; qos_gpu: qos@ffae0000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffae0000 0x0 0x20>; }; @@ -1350,6 +1321,28 @@ }; }; + dmac_bus: dma-controller@ff6d0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff6d0000 0x0 0x4000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>; + #dma-cells = <1>; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC0_PERILP>; + clock-names = "apb_pclk"; + }; + + dmac_peri: dma-controller@ff6e0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff6e0000 0x0 0x4000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>; + #dma-cells = <1>; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC1_PERILP>; + clock-names = "apb_pclk"; + }; + pmucru: pmu-clock-controller@ff750000 { compatible = "rockchip,rk3399-pmucru"; reg = <0x0 0xff750000 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/synaptics/as370.dtsi b/arch/arm64/boot/dts/synaptics/as370.dtsi index addeb0efc616..4bb5d650df9c 100644 --- a/arch/arm64/boot/dts/synaptics/as370.dtsi +++ b/arch/arm64/boot/dts/synaptics/as370.dtsi @@ -143,7 +143,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -161,7 +161,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi b/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi index 15625b99e336..0949acee4728 100644 --- a/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi +++ b/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi @@ -140,7 +140,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -158,7 +158,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -176,7 +176,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -194,7 +194,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -269,7 +269,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; }; }; @@ -284,7 +284,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index 12591a854020..ceb579fb427d 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -256,7 +256,7 @@ #size-cells = <0>; }; - sdhci0: sdhci@4f80000 { + sdhci0: mmc@4f80000 { compatible = "ti,am654-sdhci-5.1"; reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>; power-domains = <&k3_pds 47 TI_SCI_PD_EXCLUSIVE>; @@ -280,7 +280,7 @@ dma-coherent; }; - sdhci1: sdhci@4fa0000 { + sdhci1: mmc@4fa0000 { compatible = "ti,am654-sdhci-5.1"; reg = <0x0 0x4fa0000 0x0 0x260>, <0x0 0x4fb0000 0x0 0x134>; power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>; diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi index d84c0bc05023..a9fc1af03f27 100644 --- a/arch/arm64/boot/dts/ti/k3-am65.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi @@ -56,7 +56,7 @@ }; pmu: pmu { - compatible = "arm,armv8-pmuv3"; + compatible = "arm,cortex-a53-pmu"; /* Recommendation from GIC500 TRM Table A.3 */ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts index 331b388e1d1b..4a7182abccf5 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts @@ -6,8 +6,10 @@ /dts-v1/; #include "k3-j7200-som-p0.dtsi" +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/net/ti-dp83867.h> #include <dt-bindings/mux/ti-serdes.h> +#include <dt-bindings/phy/phy.h> / { chosen { @@ -218,3 +220,39 @@ ti,adc-channels = <0 1 2 3 4 5 6 7>; }; }; + +&serdes_refclk { + clock-frequency = <100000000>; +}; + +&serdes0 { + serdes0_pcie_link: phy@0 { + reg = <0>; + cdns,num-lanes = <2>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_PCIE>; + resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>; + }; + + serdes0_qsgmii_link: phy@1 { + reg = <2>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_QSGMII>; + resets = <&serdes_wiz0 3>; + }; +}; + +&pcie1_rc { + reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>; + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <2>; +}; + +&pcie1_ep { + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <2>; + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index b0094212aa82..17477ab0fd8e 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -2,9 +2,16 @@ /* * Device Tree Source for J7200 SoC Family Main Domain peripherals * - * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ */ +/ { + serdes_refclk: serdes-refclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; +}; + &cbass_main { msmc_ram: sram@70000000 { compatible = "mmio-sram"; @@ -499,8 +506,8 @@ reg = <0x00 0x04f80000 0x00 0x260>, <0x00 0x4f88000 0x00 0x134>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>; - clock-names = "clk_xin", "clk_ahb"; - clocks = <&k3_clks 91 3>, <&k3_clks 91 0>; + clock-names = "clk_ahb", "clk_xin"; + clocks = <&k3_clks 91 0>, <&k3_clks 91 3>; ti,otap-del-sel-legacy = <0x0>; ti,otap-del-sel-mmc-hs = <0x0>; ti,otap-del-sel-ddr52 = <0x6>; @@ -518,8 +525,8 @@ reg = <0x00 0x04fb0000 0x00 0x260>, <0x00 0x4fb8000 0x00 0x134>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>; - clock-names = "clk_xin", "clk_ahb"; - clocks = <&k3_clks 92 2>, <&k3_clks 92 1>; + clock-names = "clk_ahb", "clk_xin"; + clocks = <&k3_clks 92 1>, <&k3_clks 92 2>; ti,otap-del-sel-legacy = <0x0>; ti,otap-del-sel-sd-hs = <0x0>; ti,otap-del-sel-sdr12 = <0xf>; @@ -531,6 +538,110 @@ dma-coherent; }; + serdes_wiz0: wiz@5060000 { + compatible = "ti,j721e-wiz-10g"; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 292 11>, <&k3_clks 292 85>, <&serdes_refclk>; + clock-names = "fck", "core_ref_clk", "ext_ref_clk"; + num-lanes = <4>; + #reset-cells = <1>; + ranges = <0x5060000 0x0 0x5060000 0x10000>; + + assigned-clocks = <&k3_clks 292 85>; + assigned-clock-parents = <&k3_clks 292 89>; + + wiz0_pll0_refclk: pll0-refclk { + clocks = <&k3_clks 292 85>, <&serdes_refclk>; + clock-output-names = "wiz0_pll0_refclk"; + #clock-cells = <0>; + assigned-clocks = <&wiz0_pll0_refclk>; + assigned-clock-parents = <&k3_clks 292 85>; + }; + + wiz0_pll1_refclk: pll1-refclk { + clocks = <&k3_clks 292 85>, <&serdes_refclk>; + clock-output-names = "wiz0_pll1_refclk"; + #clock-cells = <0>; + assigned-clocks = <&wiz0_pll1_refclk>; + assigned-clock-parents = <&k3_clks 292 85>; + }; + + wiz0_refclk_dig: refclk-dig { + clocks = <&k3_clks 292 85>, <&serdes_refclk>; + clock-output-names = "wiz0_refclk_dig"; + #clock-cells = <0>; + assigned-clocks = <&wiz0_refclk_dig>; + assigned-clock-parents = <&k3_clks 292 85>; + }; + + wiz0_cmn_refclk_dig_div: cmn-refclk-dig-div { + clocks = <&wiz0_refclk_dig>; + #clock-cells = <0>; + }; + + serdes0: serdes@5060000 { + compatible = "ti,j721e-serdes-10g"; + reg = <0x05060000 0x00010000>; + reg-names = "torrent_phy"; + resets = <&serdes_wiz0 0>; + reset-names = "torrent_reset"; + clocks = <&wiz0_pll0_refclk>; + clock-names = "refclk"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + pcie1_rc: pcie@2910000 { + compatible = "ti,j7200-pcie-host", "ti,j721e-pcie-host"; + reg = <0x00 0x02910000 0x00 0x1000>, + <0x00 0x02917000 0x00 0x400>, + <0x00 0x0d800000 0x00 0x00800000>, + <0x00 0x18000000 0x00 0x00001000>; + reg-names = "intd_cfg", "user_cfg", "reg", "cfg"; + interrupt-names = "link_state"; + interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>; + device_type = "pci"; + ti,syscon-pcie-ctrl = <&scm_conf 0x4074>; + max-link-speed = <3>; + num-lanes = <4>; + power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 240 6>; + clock-names = "fck"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x0 0xf>; + cdns,no-bar-match-nbits = <64>; + vendor-id = /bits/ 16 <0x104c>; + device-id = /bits/ 16 <0xb00f>; + msi-map = <0x0 &gic_its 0x0 0x10000>; + dma-coherent; + ranges = <0x01000000 0x0 0x18001000 0x00 0x18001000 0x0 0x0010000>, + <0x02000000 0x0 0x18011000 0x00 0x18011000 0x0 0x7fef000>; + dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>; + }; + + pcie1_ep: pcie-ep@2910000 { + compatible = "ti,j7200-pcie-ep", "ti,j721e-pcie-ep"; + reg = <0x00 0x02910000 0x00 0x1000>, + <0x00 0x02917000 0x00 0x400>, + <0x00 0x0d800000 0x00 0x00800000>, + <0x00 0x18000000 0x00 0x08000000>; + reg-names = "intd_cfg", "user_cfg", "reg", "mem"; + interrupt-names = "link_state"; + interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>; + ti,syscon-pcie-ctrl = <&scm_conf 0x4074>; + max-link-speed = <3>; + num-lanes = <4>; + power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 240 6>; + clock-names = "fck"; + max-functions = /bits/ 8 <6>; + dma-coherent; + }; + usbss0: cdns-usb@4104000 { compatible = "ti,j721e-usb"; reg = <0x00 0x4104000 0x00 0x100>; @@ -560,4 +671,44 @@ dr_mode = "otg"; }; }; + + main_r5fss0: r5fss@5c00000 { + compatible = "ti,j7200-r5fss"; + ti,cluster-mode = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5c00000 0x00 0x5c00000 0x20000>, + <0x5d00000 0x00 0x5d00000 0x20000>; + power-domains = <&k3_pds 243 TI_SCI_PD_EXCLUSIVE>; + + main_r5fss0_core0: r5f@5c00000 { + compatible = "ti,j7200-r5f"; + reg = <0x5c00000 0x00010000>, + <0x5c10000 0x00010000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <245>; + ti,sci-proc-ids = <0x06 0xff>; + resets = <&k3_reset 245 1>; + firmware-name = "j7200-main-r5f0_0-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + + main_r5fss0_core1: r5f@5d00000 { + compatible = "ti,j7200-r5f"; + reg = <0x5d00000 0x00008000>, + <0x5d10000 0x00008000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <246>; + ti,sci-proc-ids = <0x07 0xff>; + resets = <&k3_reset 246 1>; + firmware-name = "j7200-main-r5f0_1-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi index bb1fe9c12e44..359e3e8a8cd0 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi @@ -2,7 +2,7 @@ /* * Device Tree Source for J7200 SoC Family MCU/WAKEUP Domain peripherals * - * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ */ &cbass_mcu_wakeup { @@ -289,4 +289,44 @@ compatible = "ti,am3359-adc"; }; }; + + mcu_r5fss0: r5fss@41000000 { + compatible = "ti,j7200-r5fss"; + ti,cluster-mode = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x41000000 0x00 0x41000000 0x20000>, + <0x41400000 0x00 0x41400000 0x20000>; + power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>; + + mcu_r5fss0_core0: r5f@41000000 { + compatible = "ti,j7200-r5f"; + reg = <0x41000000 0x00010000>, + <0x41010000 0x00010000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <250>; + ti,sci-proc-ids = <0x01 0xff>; + resets = <&k3_reset 250 1>; + firmware-name = "j7200-mcu-r5f0_0-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + + mcu_r5fss0_core1: r5f@41400000 { + compatible = "ti,j7200-r5f"; + reg = <0x41400000 0x00008000>, + <0x41410000 0x00008000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <251>; + ti,sci-proc-ids = <0x02 0xff>; + resets = <&k3_reset 251 1>; + firmware-name = "j7200-mcu-r5f0_1-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi index 7b5e9aa0324e..a988e2ab2ba1 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; @@ -25,6 +25,60 @@ alignment = <0x1000>; no-map; }; + + mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0000000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0100000 0x00 0xf00000>; + no-map; + }; + + mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1000000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core0_memory_region: r5f-memory@a2100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core1_memory_region: r5f-memory@a3100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3100000 0x00 0xf00000>; + no-map; + }; + + rtos_ipc_memory_region: ipc-memories@a4000000 { + reg = <0x00 0xa4000000 0x00 0x00800000>; + alignment = <0x1000>; + no-map; + }; }; }; @@ -141,6 +195,30 @@ status = "disabled"; }; +&mcu_r5fss0_core0 { + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; + memory-region = <&mcu_r5fss0_core0_dma_memory_region>, + <&mcu_r5fss0_core0_memory_region>; +}; + +&mcu_r5fss0_core1 { + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>; + memory-region = <&mcu_r5fss0_core1_dma_memory_region>, + <&mcu_r5fss0_core1_memory_region>; +}; + +&main_r5fss0_core0 { + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; + memory-region = <&main_r5fss0_core0_dma_memory_region>, + <&main_r5fss0_core0_memory_region>; +}; + +&main_r5fss0_core1 { + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>; + memory-region = <&main_r5fss0_core1_dma_memory_region>, + <&main_r5fss0_core1_memory_region>; +}; + &main_i2c0 { pinctrl-names = "default"; pinctrl-0 = <&main_i2c0_pins_default>; diff --git a/arch/arm64/boot/dts/ti/k3-j7200.dtsi b/arch/arm64/boot/dts/ti/k3-j7200.dtsi index 66169bcf7c9a..b7005b803149 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi @@ -114,7 +114,7 @@ }; pmu: pmu { - compatible = "arm,armv8-pmuv3"; + compatible = "arm,cortex-a72-pmu"; interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index b32df591c766..8c84dafb7125 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -28,38 +28,6 @@ #size-cells = <1>; ranges = <0x0 0x0 0x00100000 0x1c000>; - pcie0_ctrl: syscon@4070 { - compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; - reg = <0x00004070 0x4>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x4070 0x4070 0x4>; - }; - - pcie1_ctrl: syscon@4074 { - compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; - reg = <0x00004074 0x4>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x4074 0x4074 0x4>; - }; - - pcie2_ctrl: syscon@4078 { - compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; - reg = <0x00004078 0x4>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x4078 0x4078 0x4>; - }; - - pcie3_ctrl: syscon@407c { - compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; - reg = <0x0000407c 0x4>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x407c 0x407c 0x4>; - }; - serdes_ln_ctrl: mux@4080 { compatible = "mmio-mux"; reg = <0x00004080 0x50>; @@ -618,7 +586,7 @@ interrupt-names = "link_state"; interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>; device_type = "pci"; - ti,syscon-pcie-ctrl = <&pcie0_ctrl>; + ti,syscon-pcie-ctrl = <&scm_conf 0x4070>; max-link-speed = <3>; num-lanes = <2>; power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>; @@ -645,13 +613,12 @@ reg-names = "intd_cfg", "user_cfg", "reg", "mem"; interrupt-names = "link_state"; interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>; - ti,syscon-pcie-ctrl = <&pcie0_ctrl>; + ti,syscon-pcie-ctrl = <&scm_conf 0x4070>; max-link-speed = <3>; num-lanes = <2>; power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 239 1>; clock-names = "fck"; - cdns,max-outbound-regions = <16>; max-functions = /bits/ 8 <6>; max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>; dma-coherent; @@ -667,7 +634,7 @@ interrupt-names = "link_state"; interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>; device_type = "pci"; - ti,syscon-pcie-ctrl = <&pcie1_ctrl>; + ti,syscon-pcie-ctrl = <&scm_conf 0x4074>; max-link-speed = <3>; num-lanes = <2>; power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>; @@ -694,13 +661,12 @@ reg-names = "intd_cfg", "user_cfg", "reg", "mem"; interrupt-names = "link_state"; interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>; - ti,syscon-pcie-ctrl = <&pcie1_ctrl>; + ti,syscon-pcie-ctrl = <&scm_conf 0x4074>; max-link-speed = <3>; num-lanes = <2>; power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 240 1>; clock-names = "fck"; - cdns,max-outbound-regions = <16>; max-functions = /bits/ 8 <6>; max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>; dma-coherent; @@ -716,7 +682,7 @@ interrupt-names = "link_state"; interrupts = <GIC_SPI 342 IRQ_TYPE_EDGE_RISING>; device_type = "pci"; - ti,syscon-pcie-ctrl = <&pcie2_ctrl>; + ti,syscon-pcie-ctrl = <&scm_conf 0x4078>; max-link-speed = <3>; num-lanes = <2>; power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>; @@ -743,13 +709,12 @@ reg-names = "intd_cfg", "user_cfg", "reg", "mem"; interrupt-names = "link_state"; interrupts = <GIC_SPI 342 IRQ_TYPE_EDGE_RISING>; - ti,syscon-pcie-ctrl = <&pcie2_ctrl>; + ti,syscon-pcie-ctrl = <&scm_conf 0x4078>; max-link-speed = <3>; num-lanes = <2>; power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 241 1>; clock-names = "fck"; - cdns,max-outbound-regions = <16>; max-functions = /bits/ 8 <6>; max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>; dma-coherent; @@ -765,7 +730,7 @@ interrupt-names = "link_state"; interrupts = <GIC_SPI 354 IRQ_TYPE_EDGE_RISING>; device_type = "pci"; - ti,syscon-pcie-ctrl = <&pcie3_ctrl>; + ti,syscon-pcie-ctrl = <&scm_conf 0x407c>; max-link-speed = <3>; num-lanes = <2>; power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>; @@ -792,13 +757,12 @@ reg-names = "intd_cfg", "user_cfg", "reg", "mem"; interrupt-names = "link_state"; interrupts = <GIC_SPI 354 IRQ_TYPE_EDGE_RISING>; - ti,syscon-pcie-ctrl = <&pcie3_ctrl>; + ti,syscon-pcie-ctrl = <&scm_conf 0x407c>; max-link-speed = <3>; num-lanes = <2>; power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 242 1>; clock-names = "fck"; - cdns,max-outbound-regions = <16>; max-functions = /bits/ 8 <6>; max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>; dma-coherent; @@ -1068,13 +1032,13 @@ clock-names = "gpio"; }; - main_sdhci0: sdhci@4f80000 { + main_sdhci0: mmc@4f80000 { compatible = "ti,j721e-sdhci-8bit"; reg = <0x0 0x4f80000 0x0 0x1000>, <0x0 0x4f88000 0x0 0x400>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>; - clock-names = "clk_xin", "clk_ahb"; - clocks = <&k3_clks 91 1>, <&k3_clks 91 0>; + clock-names = "clk_ahb", "clk_xin"; + clocks = <&k3_clks 91 0>, <&k3_clks 91 1>; assigned-clocks = <&k3_clks 91 1>; assigned-clock-parents = <&k3_clks 91 2>; bus-width = <8>; @@ -1090,13 +1054,13 @@ dma-coherent; }; - main_sdhci1: sdhci@4fb0000 { + main_sdhci1: mmc@4fb0000 { compatible = "ti,j721e-sdhci-4bit"; reg = <0x0 0x04fb0000 0x0 0x1000>, <0x0 0x4fb8000 0x0 0x400>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>; - clock-names = "clk_xin", "clk_ahb"; - clocks = <&k3_clks 92 0>, <&k3_clks 92 5>; + clock-names = "clk_ahb", "clk_xin"; + clocks = <&k3_clks 92 5>, <&k3_clks 92 0>; assigned-clocks = <&k3_clks 92 0>; assigned-clock-parents = <&k3_clks 92 1>; ti,otap-del-sel-legacy = <0x0>; @@ -1110,13 +1074,13 @@ dma-coherent; }; - main_sdhci2: sdhci@4f98000 { + main_sdhci2: mmc@4f98000 { compatible = "ti,j721e-sdhci-4bit"; reg = <0x0 0x4f98000 0x0 0x1000>, <0x0 0x4f90000 0x0 0x400>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&k3_pds 93 TI_SCI_PD_EXCLUSIVE>; - clock-names = "clk_xin", "clk_ahb"; - clocks = <&k3_clks 93 0>, <&k3_clks 93 5>; + clock-names = "clk_ahb", "clk_xin"; + clocks = <&k3_clks 93 5>, <&k3_clks 93 0>; assigned-clocks = <&k3_clks 93 0>; assigned-clock-parents = <&k3_clks 93 1>; ti,otap-del-sel-legacy = <0x0>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi index cc483f7344af..f0587fde147e 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi @@ -115,7 +115,7 @@ }; pmu: pmu { - compatible = "arm,armv8-pmuv3"; + compatible = "arm,cortex-a72-pmu"; /* Recommendation from GIC500 TRM Table A.3 */ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts index ed0bf7f13f54..bf0620afe117 100644 --- a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts +++ b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts @@ -41,3 +41,30 @@ clocks = <&uart_clk>; clock-names = "apb_pclk"; }; + +&piether { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + clocks = <&clk300mhz>, <&clk125mhz>; + clock-names = "stmmaceth", "phy_ref_clk"; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@1 { + device_type = "ethernet-phy"; + reg = <0x1>; + }; + }; +}; + +&wdt { + status = "okay"; + clocks = <&wdt_clk>; +}; + +&gpio { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi index 242f25f4e12a..17934fd9a14c 100644 --- a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi +++ b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi @@ -134,6 +134,26 @@ #clock-cells = <0>; }; + clk125mhz: clk125mhz { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + #clock-cells = <0>; + clock-output-names = "clk125mhz"; + }; + + clk300mhz: clk300mhz { + compatible = "fixed-clock"; + clock-frequency = <300000000>; + #clock-cells = <0>; + clock-output-names = "clk300mhz"; + }; + + wdt_clk: wdt-clk { + compatible = "fixed-clock"; + clock-frequency = <150000000>; + #clock-cells = <0>; + }; + soc { #address-cells = <2>; #size-cells = <2>; @@ -157,6 +177,17 @@ reg = <0 0x24190000 0 0x10000>; }; + gpio: gpio@28020000 { + compatible = "toshiba,gpio-tmpv7708"; + reg = <0 0x28020000 0 0x1000>; + #gpio-cells = <0x2>; + gpio-ranges = <&pmux 0 0 32>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + }; + uart0: serial@28200000 { compatible = "arm,pl011", "arm,primecell"; reg = <0 0x28200000 0 0x1000>; @@ -384,6 +415,23 @@ #size-cells = <0>; status = "disabled"; }; + + piether: ethernet@28000000 { + compatible = "toshiba,visconti-dwmac", "snps,dwmac-4.20a"; + reg = <0 0x28000000 0 0x10000>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + snps,txpbl = <4>; + snps,rxpbl = <4>; + snps,tso; + status = "disabled"; + }; + + wdt: wdt@28330000 { + compatible = "toshiba,visconti-wdt"; + reg = <0 0x28330000 0 0x1000>; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile index 60f5443f3ef4..11fb4fd3ebd4 100644 --- a/arch/arm64/boot/dts/xilinx/Makefile +++ b/arch/arm64/boot/dts/xilinx/Makefile @@ -13,5 +13,6 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revB.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-rev1.0.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu104-revA.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu104-revC.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu106-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu111-revA.dtb diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi index c94c3bb67edc..cf5295224750 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi @@ -116,6 +116,10 @@ clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>; }; +&nand0 { + clocks = <&zynqmp_clk NAND_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + &gem0 { clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM0_REF>, <&zynqmp_clk GEM0_TX>, <&zynqmp_clk GEM0_RX>, @@ -160,6 +164,10 @@ clocks = <&zynqmp_clk PCIE_REF>; }; +&qspi { + clocks = <&zynqmp_clk QSPI_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + &sata { clocks = <&zynqmp_clk SATA_REF>; }; @@ -215,3 +223,17 @@ &watchdog0 { clocks = <&zynqmp_clk WDT>; }; + +&lpd_watchdog { + clocks = <&zynqmp_clk LPD_WDT>; +}; + +&zynqmp_dpdma { + clocks = <&zynqmp_clk DPDMA_REF>; +}; + +&zynqmp_dpsub { + clocks = <&zynqmp_clk TOPSW_LSBUS>, + <&zynqmp_clk DP_AUDIO_REF>, + <&zynqmp_clk DP_VIDEO_REF>; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts index 68ecd0f7b2f2..a53598c3624b 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts @@ -15,6 +15,7 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/phy/phy.h> / { model = "ZynqMP ZCU100 RevC"; @@ -108,6 +109,18 @@ compatible = "iio-hwmon"; io-channels = <&u35 0>, <&u35 1>, <&u35 2>, <&u35 3>; }; + + si5335a_0: clk26 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + si5335a_1: clk27 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; }; &dcc { @@ -224,6 +237,13 @@ }; }; +&psgtr { + status = "okay"; + /* usb3, dps */ + clocks = <&si5335a_0>, <&si5335a_1>; + clock-names = "ref0", "ref1"; +}; + &rtc { status = "okay"; }; @@ -233,11 +253,13 @@ status = "okay"; no-1-8-v; disable-wp; + xlnx,mio-bank = <0>; }; &sdhci1 { status = "okay"; bus-width = <0x4>; + xlnx,mio-bank = <0>; non-removable; disable-wp; cap-power-off-card; @@ -293,3 +315,14 @@ &watchdog0 { status = "okay"; }; + +&zynqmp_dpdma { + status = "okay"; +}; + +&zynqmp_dpsub { + status = "okay"; + phy-names = "dp-phy0", "dp-phy1"; + phys = <&psgtr 1 PHY_TYPE_DP 0 1>, + <&psgtr 0 PHY_TYPE_DP 1 1>; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts index f1255f635dfd..12e8bd48dc8c 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts @@ -13,6 +13,7 @@ #include "zynqmp-clk-ccf.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/phy/phy.h> / { model = "ZynqMP ZCU102 RevA"; @@ -132,6 +133,19 @@ compatible = "iio-hwmon"; io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>; }; + + /* 48MHz reference crystal */ + ref48: ref48M { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + + refhdmi: refhdmi { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <114285000>; + }; }; &can1 { @@ -483,9 +497,56 @@ #size-cells = <0>; reg = <1>; si5341: clock-generator@36 { /* SI5341 - u69 */ + compatible = "silabs,si5341"; reg = <0x36>; + #clock-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&ref48>; + clock-names = "xtal"; + clock-output-names = "si5341"; + + si5341_0: out@0 { + /* refclk0 for PS-GT, used for DP */ + reg = <0>; + always-on; + }; + si5341_2: out@2 { + /* refclk2 for PS-GT, used for USB3 */ + reg = <2>; + always-on; + }; + si5341_3: out@3 { + /* refclk3 for PS-GT, used for SATA */ + reg = <3>; + always-on; + }; + si5341_4: out@4 { + /* refclk4 for PS-GT, used for PCIE slot */ + reg = <4>; + always-on; + }; + si5341_5: out@5 { + /* refclk5 for PS-GT, used for PCIE */ + reg = <5>; + always-on; + }; + si5341_6: out@6 { + /* refclk6 PL CLK125 */ + reg = <6>; + always-on; + }; + si5341_7: out@7 { + /* refclk7 PL CLK74 */ + reg = <7>; + always-on; + }; + si5341_9: out@9 { + /* refclk9 used for PS_REF_CLK 33.3 MHz */ + reg = <9>; + always-on; + }; }; - }; i2c@2 { #address-cells = <1>; @@ -526,6 +587,17 @@ * interrupt-parent = <&>; * interrupts = <>; */ + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + clocks = <&refhdmi>; + clock-names = "xtal"; + clock-output-names = "si5328"; + + si5328_clk: clk0@0 { + reg = <0>; + clock-frequency = <27000000>; + }; }; }; /* 5 - 7 unconnected */ @@ -592,6 +664,13 @@ status = "okay"; }; +&psgtr { + status = "okay"; + /* pcie, sata, usb3, dp */ + clocks = <&si5341 0 5>, <&si5341 0 3>, <&si5341 0 2>, <&si5341 0 0>; + clock-names = "ref0", "ref1", "ref2", "ref3"; +}; + &rtc { status = "okay"; }; @@ -607,12 +686,15 @@ ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + phy-names = "sata-phy"; + phys = <&psgtr 3 PHY_TYPE_SATA 1 1>; }; /* SD1 with level shifter */ &sdhci1 { status = "okay"; no-1-8-v; + xlnx,mio-bank = <1>; }; &uart0 { @@ -632,3 +714,13 @@ &watchdog0 { status = "okay"; }; + +&zynqmp_dpdma { + status = "okay"; +}; + +&zynqmp_dpsub { + status = "okay"; + phy-names = "dp-phy0"; + phys = <&psgtr 1 PHY_TYPE_DP 0 3>; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts index 7a4614e3f5fa..5637e1c17fdf 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts @@ -12,6 +12,7 @@ #include "zynqmp.dtsi" #include "zynqmp-clk-ccf.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/phy/phy.h> / { model = "ZynqMP ZCU104 RevA"; @@ -36,6 +37,24 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; + + clock_8t49n287_5: clk125 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + clock_8t49n287_2: clk26 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + clock_8t49n287_3: clk27 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; }; &can1 { @@ -158,6 +177,13 @@ status = "okay"; }; +&psgtr { + status = "okay"; + /* nc, sata, usb3, dp */ + clocks = <&clock_8t49n287_5>, <&clock_8t49n287_2>, <&clock_8t49n287_3>; + clock-names = "ref1", "ref2", "ref3"; +}; + &sata { status = "okay"; /* SATA OOB timing settings */ @@ -169,12 +195,15 @@ ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + phy-names = "sata-phy"; + phys = <&psgtr 3 PHY_TYPE_SATA 1 1>; }; /* SD1 with level shifter */ &sdhci1 { status = "okay"; no-1-8-v; + xlnx,mio-bank = <1>; disable-wp; }; @@ -195,3 +224,14 @@ &watchdog0 { status = "okay"; }; + +&zynqmp_dpdma { + status = "okay"; +}; + +&zynqmp_dpsub { + status = "okay"; + phy-names = "dp-phy0", "dp-phy1"; + phys = <&psgtr 1 PHY_TYPE_DP 0 3>, + <&psgtr 0 PHY_TYPE_DP 1 3>; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts new file mode 100644 index 000000000000..7f2e32831b05 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts @@ -0,0 +1,293 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Xilinx ZynqMP ZCU104 + * + * (C) Copyright 2017 - 2020, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk-ccf.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/phy/phy.h> + +/ { + model = "ZynqMP ZCU104 RevC"; + compatible = "xlnx,zynqmp-zcu104-revC", "xlnx,zynqmp-zcu104", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem3; + i2c0 = &i2c1; + mmc0 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &dcc; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + ina226 { + compatible = "iio-hwmon"; + io-channels = <&u183 0>, <&u183 1>, <&u183 2>, <&u183 3>; + }; + + clock_8t49n287_5: clk125 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + clock_8t49n287_2: clk26 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + clock_8t49n287_3: clk27 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; +}; + +&can1 { + status = "okay"; +}; + +&dcc { + status = "okay"; +}; + +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&gem3 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: ethernet-phy@c { + reg = <0xc>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; + }; +}; + +&gpio { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + tca6416_u97: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + /* + * IRQ not connected + * Lines: + * 0 - IRPS5401_ALERT_B + * 1 - HDMI_8T49N241_INT_ALM + * 2 - MAX6643_OT_B + * 3 - MAX6643_FANFAIL_B + * 5 - IIC_MUX_RESET_B + * 6 - GEM3_EXP_RESET_B + * 7 - FMC_LPC_PRSNT_M2C_B + * 4, 10 - 17 - not connected + */ + }; + + /* Another connection to this bus via PL i2c via PCA9306 - u45 */ + i2c-mux@74 { /* u34 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* + * IIC_EEPROM 1kB memory which uses 256B blocks + * where every block has different address. + * 0 - 256B address 0x54 + * 256B - 512B address 0x55 + * 512B - 768B address 0x56 + * 768B - 1024B address 0x57 + */ + eeprom: eeprom@54 { /* u23 */ + compatible = "atmel,24c08"; + reg = <0x54>; + #address-cells = <1>; + #size-cells = <1>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + clock_8t49n287: clock-generator@6c { /* 8T49N287 - u182 */ + reg = <0x6c>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + irps5401_43: irps5401@43 { /* IRPS5401 - u175 */ + compatible = "infineon,irps5401"; + reg = <0x43>; /* pmbus / i2c 0x13 */ + }; + irps5401_44: irps5401@44 { /* IRPS5401 - u180 */ + compatible = "infineon,irps5401"; + reg = <0x44>; /* pmbus / i2c 0x14 */ + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + u183: ina226@40 { /* u183 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + reg = <0x40>; + shunt-resistor = <5000>; + }; + }; + + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + + /* 4, 6 not connected */ + }; +}; + +&qspi { + status = "okay"; + flash@0 { + compatible = "m25p80", "jedec,spi-nor"; /* n25q512a 128MiB */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + }; +}; + +&rtc { + status = "okay"; +}; + +&psgtr { + status = "okay"; + /* nc, sata, usb3, dp */ + clocks = <&clock_8t49n287_5>, <&clock_8t49n287_2>, <&clock_8t49n287_3>; + clock-names = "ref1", "ref2", "ref3"; +}; + +&sata { + status = "okay"; + /* SATA OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + phy-names = "sata-phy"; + phys = <&psgtr 3 PHY_TYPE_SATA 1 1>; +}; + +/* SD1 with level shifter */ +&sdhci1 { + status = "okay"; + no-1-8-v; + xlnx,mio-bank = <1>; + disable-wp; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +/* ULPI SMSC USB3320 */ +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&watchdog0 { + status = "okay"; +}; + +&zynqmp_dpdma { + status = "okay"; +}; + +&zynqmp_dpsub { + status = "okay"; + phy-names = "dp-phy0", "dp-phy1"; + phys = <&psgtr 1 PHY_TYPE_DP 0 3>, + <&psgtr 0 PHY_TYPE_DP 1 3>; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts index 6e9efe233838..18771e868399 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts @@ -13,6 +13,7 @@ #include "zynqmp-clk-ccf.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/phy/phy.h> / { model = "ZynqMP ZCU106 RevA"; @@ -132,6 +133,19 @@ compatible = "iio-hwmon"; io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>; }; + + /* 48MHz reference crystal */ + ref48: ref48M { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + + refhdmi: refhdmi { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <114285000>; + }; }; &can1 { @@ -142,6 +156,17 @@ status = "okay"; }; +&zynqmp_dpdma { + status = "okay"; +}; + +&zynqmp_dpsub { + status = "okay"; + phy-names = "dp-phy0", "dp-phy1"; + phys = <&psgtr 1 PHY_TYPE_DP 0 3>, + <&psgtr 0 PHY_TYPE_DP 1 3>; +}; + /* fpd_dma clk 667MHz, lpd_dma 500MHz */ &fpd_dma_chan1 { status = "okay"; @@ -482,7 +507,45 @@ #size-cells = <0>; reg = <1>; si5341: clock-generator@36 { /* SI5341 - u69 */ + compatible = "silabs,si5341"; reg = <0x36>; + #clock-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&ref48>; + clock-names = "xtal"; + clock-output-names = "si5341"; + + si5341_0: out@0 { + /* refclk0 for PS-GT, used for DP */ + reg = <0>; + always-on; + }; + si5341_2: out@2 { + /* refclk2 for PS-GT, used for USB3 */ + reg = <2>; + always-on; + }; + si5341_3: out@3 { + /* refclk3 for PS-GT, used for SATA */ + reg = <3>; + always-on; + }; + si5341_6: out@6 { + /* refclk6 PL CLK125 */ + reg = <6>; + always-on; + }; + si5341_7: out@7 { + /* refclk7 PL CLK74 */ + reg = <7>; + always-on; + }; + si5341_9: out@9 { + /* refclk9 used for PS_REF_CLK 33.3 MHz */ + reg = <9>; + always-on; + }; }; }; @@ -520,6 +583,22 @@ reg = <4>; si5328: clock-generator@69 {/* SI5328 - u20 */ reg = <0x69>; + /* + * Chip has interrupt present connected to PL + * interrupt-parent = <&>; + * interrupts = <>; + */ + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + clocks = <&refhdmi>; + clock-names = "xtal"; + clock-output-names = "si5328"; + + si5328_clk: clk0@0 { + reg = <0>; + clock-frequency = <27000000>; + }; }; }; i2c@5 { @@ -591,6 +670,13 @@ }; }; +&psgtr { + status = "okay"; + /* nc, sata, usb3, dp */ + clocks = <&si5341 0 3>, <&si5341 0 2>, <&si5341 0 0>; + clock-names = "ref1", "ref2", "ref3"; +}; + &rtc { status = "okay"; }; @@ -606,12 +692,15 @@ ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + phy-names = "sata-phy"; + phys = <&psgtr 3 PHY_TYPE_SATA 1 1>; }; /* SD1 with level shifter */ &sdhci1 { status = "okay"; no-1-8-v; + xlnx,mio-bank = <1>; }; &uart0 { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts index 2e92634c77f9..d4b68f0d0098 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts @@ -13,6 +13,7 @@ #include "zynqmp-clk-ccf.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/phy/phy.h> / { model = "ZynqMP ZCU111 RevA"; @@ -116,6 +117,13 @@ compatible = "iio-hwmon"; io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>; }; + + /* 48MHz reference crystal */ + ref48: ref48M { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; }; &dcc { @@ -374,9 +382,46 @@ #size-cells = <0>; reg = <1>; si5341: clock-generator@36 { /* SI5341 - u46 */ + compatible = "silabs,si5341"; reg = <0x36>; + #clock-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&ref48>; + clock-names = "xtal"; + clock-output-names = "si5341"; + + si5341_0: out@0 { + /* refclk0 for PS-GT, used for DP */ + reg = <0>; + always-on; + }; + si5341_2: out@2 { + /* refclk2 for PS-GT, used for USB3 */ + reg = <2>; + always-on; + }; + si5341_3: out@3 { + /* refclk3 for PS-GT, used for SATA */ + reg = <3>; + always-on; + }; + si5341_5: out@5 { + /* refclk5 PL CLK100 */ + reg = <5>; + always-on; + }; + si5341_6: out@6 { + /* refclk6 PL CLK125 */ + reg = <6>; + always-on; + }; + si5341_9: out@9 { + /* refclk9 used for PS_REF_CLK 33.3 MHz */ + reg = <9>; + always-on; + }; }; - }; i2c@2 { #address-cells = <1>; @@ -410,7 +455,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <4>; - si5328: clock-generator@69 { /* SI5328 - u48 */ + si5382: clock-generator@69 { /* SI5382 - u48 */ reg = <0x69>; }; }; @@ -497,6 +542,13 @@ }; }; +&psgtr { + status = "okay"; + /* nc, sata, usb3, dp */ + clocks = <&si5341 0 3>, <&si5341 0 2>, <&si5341 0 0>; + clock-names = "ref1", "ref2", "ref3"; +}; + &rtc { status = "okay"; }; @@ -512,12 +564,15 @@ ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + phy-names = "sata-phy"; + phys = <&psgtr 3 PHY_TYPE_SATA 1 1>; }; /* SD1 with level shifter */ &sdhci1 { status = "okay"; no-1-8-v; + xlnx,mio-bank = <1>; }; &uart0 { @@ -529,3 +584,14 @@ status = "okay"; dr_mode = "host"; }; + +&zynqmp_dpdma { + status = "okay"; +}; + +&zynqmp_dpsub { + status = "okay"; + phy-names = "dp-phy0", "dp-phy1"; + phys = <&psgtr 1 PHY_TYPE_DP 0 1>, + <&psgtr 0 PHY_TYPE_DP 1 1>; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 68923fbd0e89..a3b391d18787 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -12,6 +12,7 @@ * the License, or (at your option) any later version. */ +#include <dt-bindings/dma/xlnx-zynqmp-dpdma.h> #include <dt-bindings/power/xlnx-zynqmp-power.h> #include <dt-bindings/reset/xlnx-zynqmp-resets.h> @@ -99,7 +100,7 @@ }; }; - zynqmp_ipi { + zynqmp_ipi: zynqmp_ipi { compatible = "xlnx,zynqmp-ipi-mailbox"; interrupt-parent = <&gic>; interrupts = <0 35 4>; @@ -187,6 +188,11 @@ xlnx_aes: zynqmp-aes { compatible = "xlnx,zynqmp-aes"; }; + + zynqmp_reset: reset-controller { + compatible = "xlnx,zynqmp-reset"; + #reset-cells = <1>; + }; }; }; @@ -265,6 +271,8 @@ interrupts = <0 124 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <128>; + #stream-id-cells = <1>; + iommus = <&smmu 0x14e8>; power-domains = <&zynqmp_firmware PD_GDMA>; }; @@ -276,6 +284,8 @@ interrupts = <0 125 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <128>; + #stream-id-cells = <1>; + iommus = <&smmu 0x14e9>; power-domains = <&zynqmp_firmware PD_GDMA>; }; @@ -287,6 +297,8 @@ interrupts = <0 126 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <128>; + #stream-id-cells = <1>; + iommus = <&smmu 0x14ea>; power-domains = <&zynqmp_firmware PD_GDMA>; }; @@ -298,6 +310,8 @@ interrupts = <0 127 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <128>; + #stream-id-cells = <1>; + iommus = <&smmu 0x14eb>; power-domains = <&zynqmp_firmware PD_GDMA>; }; @@ -309,6 +323,8 @@ interrupts = <0 128 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <128>; + #stream-id-cells = <1>; + iommus = <&smmu 0x14ec>; power-domains = <&zynqmp_firmware PD_GDMA>; }; @@ -320,6 +336,8 @@ interrupts = <0 129 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <128>; + #stream-id-cells = <1>; + iommus = <&smmu 0x14ed>; power-domains = <&zynqmp_firmware PD_GDMA>; }; @@ -331,6 +349,8 @@ interrupts = <0 130 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <128>; + #stream-id-cells = <1>; + iommus = <&smmu 0x14ee>; power-domains = <&zynqmp_firmware PD_GDMA>; }; @@ -342,11 +362,14 @@ interrupts = <0 131 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <128>; + #stream-id-cells = <1>; + iommus = <&smmu 0x14ef>; power-domains = <&zynqmp_firmware PD_GDMA>; }; gic: interrupt-controller@f9010000 { compatible = "arm,gic-400"; + #address-cells = <0>; #interrupt-cells = <3>; reg = <0x0 0xf9010000 0x0 0x10000>, <0x0 0xf9020000 0x0 0x20000>, @@ -369,6 +392,8 @@ interrupts = <0 77 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; + #stream-id-cells = <1>; + iommus = <&smmu 0x868>; power-domains = <&zynqmp_firmware PD_ADMA>; }; @@ -380,6 +405,8 @@ interrupts = <0 78 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; + #stream-id-cells = <1>; + iommus = <&smmu 0x869>; power-domains = <&zynqmp_firmware PD_ADMA>; }; @@ -391,6 +418,8 @@ interrupts = <0 79 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; + #stream-id-cells = <1>; + iommus = <&smmu 0x86a>; power-domains = <&zynqmp_firmware PD_ADMA>; }; @@ -402,6 +431,8 @@ interrupts = <0 80 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; + #stream-id-cells = <1>; + iommus = <&smmu 0x86b>; power-domains = <&zynqmp_firmware PD_ADMA>; }; @@ -413,6 +444,8 @@ interrupts = <0 81 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; + #stream-id-cells = <1>; + iommus = <&smmu 0x86c>; power-domains = <&zynqmp_firmware PD_ADMA>; }; @@ -424,6 +457,8 @@ interrupts = <0 82 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; + #stream-id-cells = <1>; + iommus = <&smmu 0x86d>; power-domains = <&zynqmp_firmware PD_ADMA>; }; @@ -435,6 +470,8 @@ interrupts = <0 83 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; + #stream-id-cells = <1>; + iommus = <&smmu 0x86e>; power-domains = <&zynqmp_firmware PD_ADMA>; }; @@ -446,6 +483,8 @@ interrupts = <0 84 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; + #stream-id-cells = <1>; + iommus = <&smmu 0x86f>; power-domains = <&zynqmp_firmware PD_ADMA>; }; @@ -456,6 +495,20 @@ interrupts = <0 112 4>; }; + nand0: nand-controller@ff100000 { + compatible = "xlnx,zynqmp-nand-controller", "arasan,nfc-v3p10"; + status = "disabled"; + reg = <0x0 0xff100000 0x0 0x1000>; + clock-names = "controller", "bus"; + interrupt-parent = <&gic>; + interrupts = <0 14 4>; + #address-cells = <1>; + #size-cells = <0>; + #stream-id-cells = <1>; + iommus = <&smmu 0x872>; + power-domains = <&zynqmp_firmware PD_NAND>; + }; + gem0: ethernet@ff0b0000 { compatible = "cdns,zynqmp-gem", "cdns,gem"; status = "disabled"; @@ -465,6 +518,8 @@ clock-names = "pclk", "hclk", "tx_clk"; #address-cells = <1>; #size-cells = <0>; + #stream-id-cells = <1>; + iommus = <&smmu 0x874>; power-domains = <&zynqmp_firmware PD_ETH_0>; }; @@ -477,6 +532,8 @@ clock-names = "pclk", "hclk", "tx_clk"; #address-cells = <1>; #size-cells = <0>; + #stream-id-cells = <1>; + iommus = <&smmu 0x875>; power-domains = <&zynqmp_firmware PD_ETH_1>; }; @@ -489,6 +546,8 @@ clock-names = "pclk", "hclk", "tx_clk"; #address-cells = <1>; #size-cells = <0>; + #stream-id-cells = <1>; + iommus = <&smmu 0x876>; power-domains = <&zynqmp_firmware PD_ETH_2>; }; @@ -501,12 +560,15 @@ clock-names = "pclk", "hclk", "tx_clk"; #address-cells = <1>; #size-cells = <0>; + #stream-id-cells = <1>; + iommus = <&smmu 0x877>; power-domains = <&zynqmp_firmware PD_ETH_3>; }; gpio: gpio@ff0a0000 { compatible = "xlnx,zynqmp-gpio-1.0"; status = "disabled"; + #address-cells = <0>; #gpio-cells = <0x2>; gpio-controller; interrupt-parent = <&gic>; @@ -576,6 +638,22 @@ }; }; + qspi: spi@ff0f0000 { + compatible = "xlnx,zynqmp-qspi-1.0"; + status = "disabled"; + clock-names = "ref_clk", "pclk"; + interrupts = <0 15 4>; + interrupt-parent = <&gic>; + num-cs = <1>; + reg = <0x0 0xff0f0000 0x0 0x1000>, + <0x0 0xc0000000 0x0 0x8000000>; + #address-cells = <1>; + #size-cells = <0>; + #stream-id-cells = <1>; + iommus = <&smmu 0x873>; + power-domains = <&zynqmp_firmware PD_QSPI>; + }; + psgtr: phy@fd400000 { compatible = "xlnx,zynqmp-psgtr-v1.1"; status = "disabled"; @@ -602,6 +680,9 @@ interrupt-parent = <&gic>; interrupts = <0 133 4>; power-domains = <&zynqmp_firmware PD_SATA>; + #stream-id-cells = <4>; + iommus = <&smmu 0x4c0>, <&smmu 0x4c1>, + <&smmu 0x4c2>, <&smmu 0x4c3>; }; sdhci0: mmc@ff160000 { @@ -611,6 +692,8 @@ interrupts = <0 48 4>; reg = <0x0 0xff160000 0x0 0x1000>; clock-names = "clk_xin", "clk_ahb"; + #stream-id-cells = <1>; + iommus = <&smmu 0x870>; #clock-cells = <1>; clock-output-names = "clk_out_sd0", "clk_in_sd0"; power-domains = <&zynqmp_firmware PD_SD_0>; @@ -623,6 +706,8 @@ interrupts = <0 49 4>; reg = <0x0 0xff170000 0x0 0x1000>; clock-names = "clk_xin", "clk_ahb"; + #stream-id-cells = <1>; + iommus = <&smmu 0x871>; #clock-cells = <1>; clock-output-names = "clk_out_sd1", "clk_in_sd1"; power-domains = <&zynqmp_firmware PD_SD_1>; @@ -631,6 +716,7 @@ smmu: iommu@fd800000 { compatible = "arm,mmu-500"; reg = <0x0 0xfd800000 0x0 0x20000>; + #iommu-cells = <1>; status = "disabled"; #global-interrupts = <1>; interrupt-parent = <&gic>; @@ -753,5 +839,45 @@ reg = <0x0 0xfd4d0000 0x0 0x1000>; timeout-sec = <10>; }; + + lpd_watchdog: watchdog@ff150000 { + compatible = "cdns,wdt-r1p2"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 52 1>; + reg = <0x0 0xff150000 0x0 0x1000>; + timeout-sec = <10>; + }; + + zynqmp_dpdma: dma-controller@fd4c0000 { + compatible = "xlnx,zynqmp-dpdma"; + status = "disabled"; + reg = <0x0 0xfd4c0000 0x0 0x1000>; + interrupts = <0 122 4>; + interrupt-parent = <&gic>; + clock-names = "axi_clk"; + #dma-cells = <1>; + }; + + zynqmp_dpsub: display@fd4a0000 { + compatible = "xlnx,zynqmp-dpsub-1.7"; + status = "disabled"; + reg = <0x0 0xfd4a0000 0x0 0x1000>, + <0x0 0xfd4aa000 0x0 0x1000>, + <0x0 0xfd4ab000 0x0 0x1000>, + <0x0 0xfd4ac000 0x0 0x1000>; + reg-names = "dp", "blend", "av_buf", "aud"; + interrupts = <0 119 4>; + interrupt-parent = <&gic>; + clock-names = "dp_apb_clk", "dp_aud_clk", + "dp_vtc_pixel_clk_in"; + power-domains = <&zynqmp_firmware PD_DP>; + resets = <&zynqmp_reset ZYNQMP_RESET_DP>; + dma-names = "vid0", "vid1", "vid2", "gfx0"; + dmas = <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO0>, + <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO1>, + <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO2>, + <&zynqmp_dpdma ZYNQMP_DPDMA_GRAPHICS>; + }; }; }; diff --git a/arch/arm64/boot/dts/zte/Makefile b/arch/arm64/boot/dts/zte/Makefile deleted file mode 100644 index 126896144bda..000000000000 --- a/arch/arm64/boot/dts/zte/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -dtb-$(CONFIG_ARCH_ZX) += zx296718-evb.dtb -dtb-$(CONFIG_ARCH_ZX) += zx296718-pcbox.dtb diff --git a/arch/arm64/boot/dts/zte/zx296718-evb.dts b/arch/arm64/boot/dts/zte/zx296718-evb.dts deleted file mode 100644 index cb2519ecd724..000000000000 --- a/arch/arm64/boot/dts/zte/zx296718-evb.dts +++ /dev/null @@ -1,144 +0,0 @@ -/* - * Copyright 2016 ZTE Corporation. - * Copyright 2016 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "zx296718.dtsi" - -/ { - model = "ZTE zx296718 evaluation board"; - compatible = "zte,zx296718-evb", "zte,zx296718"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x40000000>; - }; - - sound-spdif0 { - compatible = "audio-graph-card"; - dais = <&spdif0_port>; - }; - - sound-i2s0 { - compatible = "audio-graph-card"; - dais = <&i2s0_port>; - pinctrl-names = "default"; - pinctrl-0 = <&lifier_pins>; - pa-gpios = <&bgpio4 0 GPIO_ACTIVE_HIGH>; - widgets = "Line", "Line Out Jack"; - routing = "Amplifier", "LINEOUTL", - "Amplifier", "LINEOUTR", - "Line Out Jack", "Amplifier"; - }; -}; - -&aud96p22 { - port { - aud96p22_endpoint: endpoint { - remote-endpoint = <&i2s0_endpoint>; - }; - }; -}; - -&emmc { - status = "okay"; -}; - -&hdmi { - status = "okay"; - - port { - hdmi_endpoint: endpoint { - remote-endpoint = <&spdif0_endpoint>; - }; - }; -}; - -&i2c0 { - status = "okay"; -}; - -&i2s0 { - status = "okay"; - - i2s0_port: port { - i2s0_endpoint: endpoint { - remote-endpoint = <&aud96p22_endpoint>; - dai-format = "i2s"; - frame-master; - bitclock-master; - }; - }; -}; - -&pmm { - amplifier_pins: amplifier { - pins = "TSI3_DATA"; - function = "BGPIO"; - }; -}; - -&sd1 { - status = "okay"; -}; - -&spdif0 { - status = "okay"; - - spdif0_port: port { - spdif0_endpoint: endpoint { - remote-endpoint = <&hdmi_endpoint>; - }; - }; -}; - -&tvenc { - status = "okay"; -}; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/zte/zx296718-pcbox.dts b/arch/arm64/boot/dts/zte/zx296718-pcbox.dts deleted file mode 100644 index e02509f7082b..000000000000 --- a/arch/arm64/boot/dts/zte/zx296718-pcbox.dts +++ /dev/null @@ -1,143 +0,0 @@ -/* - * Copyright (C) 2017 Sanechips Technology Co., Ltd. - * Copyright 2017 Linaro Ltd. - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ - -/dts-v1/; -#include "zx296718.dtsi" -#include <dt-bindings/pwm/pwm.h> - -/ { - model = "ZTE ZX296718 PCBOX Board"; - compatible = "zte,zx296718-pcbox", "zte,zx296718"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@80000000 { - device_type = "memory"; - reg = <0x80000000 0x80000000>; - }; - - a53_vdd0v9: regulator-a53 { - compatible = "pwm-regulator"; - pwms = <&pwm 3 1250 PWM_POLARITY_INVERTED>; - regulator-name = "A53_VDD0V9"; - regulator-min-microvolt = <855000>; - regulator-max-microvolt = <1183000>; - pwm-dutycycle-unit = <100>; - pwm-dutycycle-range = <0 100>; - regulator-always-on; - regulator-boot-on; - }; - - sound-spdif0 { - compatible = "audio-graph-card"; - dais = <&spdif0_port>; - }; - - sound-i2s0 { - compatible = "audio-graph-card"; - dais = <&i2s0_port>; - }; -}; - -&aud96p22 { - port { - aud96p22_endpoint: endpoint { - remote-endpoint = <&i2s0_endpoint>; - }; - }; -}; - -&cpu0 { - cpu-supply = <&a53_vdd0v9>; -}; - -&emmc { - status = "okay"; -}; - -&hdmi { - status = "disabled"; - - port { - hdmi_endpoint: endpoint { - remote-endpoint = <&spdif0_endpoint>; - }; - }; -}; - -&i2c0 { - status = "okay"; -}; - -&i2s0 { - status = "okay"; - - i2s0_port: port { - i2s0_endpoint: endpoint { - remote-endpoint = <&aud96p22_endpoint>; - dai-format = "i2s"; - frame-master; - bitclock-master; - }; - }; -}; - -&irdec { - status = "okay"; -}; - -&pmm { - pwm3_pins: pwm3 { - pins = "KEY_ROW2"; - function = "PWM"; - }; - - vga_pins: vga { - pins = "KEY_COL1", "KEY_COL2", "VGA_HS", "VGA_VS"; - function = "VGA"; - }; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm3_pins>; - status = "okay"; -}; - -&sd0 { - status = "okay"; -}; - -&sd1 { - status = "okay"; -}; - -&spdif0 { - status = "okay"; - - spdif0_port: port { - spdif0_endpoint: endpoint { - remote-endpoint = <&hdmi_endpoint>; - }; - }; -}; - -&tvenc { - status = "disabled"; -}; - -&uart0 { - status = "okay"; -}; - -&vga { - pinctrl-names = "default"; - pinctrl-0 = <&vga_pins>; - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi deleted file mode 100644 index cc54837ff4ba..000000000000 --- a/arch/arm64/boot/dts/zte/zx296718.dtsi +++ /dev/null @@ -1,627 +0,0 @@ -/* - * Copyright 2016 ZTE Corporation. - * Copyright 2016 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/clock/zx296718-clock.h> - -/ { - compatible = "zte,zx296718"; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&gic>; - - aliases { - gpio0 = &bgpio0; - gpio1 = &bgpio1; - gpio2 = &bgpio2; - gpio3 = &bgpio3; - gpio4 = &bgpio4; - gpio5 = &bgpio5; - gpio6 = &bgpio6; - serial0 = &uart0; - }; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - cpu-map { - cluster0 { - core0 { - cpu = <&cpu0>; - }; - core1 { - cpu = <&cpu1>; - }; - core2 { - cpu = <&cpu2>; - }; - core3 { - cpu = <&cpu3>; - }; - }; - }; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x0>; - enable-method = "psci"; - clocks = <&topcrm A53_GATE>; - operating-points-v2 = <&cluster0_opp>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x1>; - enable-method = "psci"; - clocks = <&topcrm A53_GATE>; - operating-points-v2 = <&cluster0_opp>; - }; - - cpu2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x2>; - enable-method = "psci"; - clocks = <&topcrm A53_GATE>; - operating-points-v2 = <&cluster0_opp>; - }; - - cpu3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x3>; - enable-method = "psci"; - clocks = <&topcrm A53_GATE>; - operating-points-v2 = <&cluster0_opp>; - }; - }; - - cluster0_opp: opp-table0 { - compatible = "operating-points-v2"; - opp-shared; - - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <866000>; - clock-latency-ns = <500000>; - }; - - opp-648000000 { - opp-hz = /bits/ 64 <648000000>; - opp-microvolt = <866000>; - clock-latency-ns = <500000>; - }; - - opp-800000000 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <888000>; - clock-latency-ns = <500000>; - }; - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <898000>; - clock-latency-ns = <500000>; - }; - - opp-1188000000 { - opp-hz = /bits/ 64 <1188000000>; - opp-microvolt = <1015000>; - clock-latency-ns = <500000>; - }; - }; - - clk24k: clk-24k { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000>; - clock-output-names = "rtcclk"; - }; - - osc32k: clk-osc32k { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32000>; - clock-output-names = "osc32k"; - }; - - osc12m: clk-osc12m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <12000000>; - clock-output-names = "osc12m"; - }; - - osc24m: clk-osc24m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - clock-output-names = "osc24m"; - }; - - osc25m: clk-osc25m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - clock-output-names = "osc25m"; - }; - - osc60m: clk-osc60m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <60000000>; - clock-output-names = "osc60m"; - }; - - osc99m: clk-osc99m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <99000000>; - clock-output-names = "osc99m"; - }; - - osc125m: clk-osc125m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - clock-output-names = "osc125m"; - }; - - osc198m: clk-osc198m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <198000000>; - clock-output-names = "osc198m"; - }; - - pll_audio: clk-pll-884m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <884000000>; - clock-output-names = "pll_audio"; - }; - - pll_ddr: clk-pll-932m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <932000000>; - clock-output-names = "pll_ddr"; - }; - - pll_hsic: clk-pll-960m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <960000000>; - clock-output-names = "pll_hsic"; - }; - - pll_mac: clk-pll-1000m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1000000000>; - clock-output-names = "pll_mac"; - }; - - pll_mm0: clk-pll-1188m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1188000000>; - clock-output-names = "pll_mm0"; - }; - - pll_mm1: clk-pll-1296m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1296000000>; - clock-output-names = "pll_mm1"; - }; - - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; - }; - - pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; - }; - - gic: interrupt-controller@2a00000 { - compatible = "arm,gic-v3"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0x02a00000 0x10000>, - <0x02b00000 0xc0000>; - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; - }; - - soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges; - - irdec: ir-decoder@111000 { - compatible = "zte,zx296718-irdec"; - reg = <0x111000 0x1000>; - interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - aon_sysctrl: aon-sysctrl@116000 { - compatible = "zte,zx296718-aon-sysctrl", "syscon"; - reg = <0x116000 0x1000>; - }; - - iocfg: pin-controller@119000 { - compatible = "zte,zx296718-iocfg"; - reg = <0x119000 0x1000>; - }; - - uart0: uart@11f000 { - compatible = "arm,pl011", "arm,primecell"; - arm,primecell-periphid = <0x001feffe>; - reg = <0x11f000 0x1000>; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&osc24m>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - - sd0: mmc@1110000 { - compatible = "zte,zx296718-dw-mshc"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x01110000 0x1000>; - interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; - fifo-depth = <32>; - data-addr = <0x200>; - fifo-watermark-aligned; - bus-width = <4>; - clock-frequency = <50000000>; - clocks = <&topcrm SD0_AHB>, <&topcrm SD0_WCLK>; - clock-names = "biu", "ciu"; - max-frequency = <50000000>; - cap-sdio-irq; - cap-sd-highspeed; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; - sd-uhs-ddr50; - status = "disabled"; - }; - - sd1: mmc@1111000 { - compatible = "zte,zx296718-dw-mshc"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x01111000 0x1000>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - fifo-depth = <32>; - data-addr = <0x200>; - fifo-watermark-aligned; - bus-width = <4>; - clock-frequency = <167000000>; - clocks = <&topcrm SD1_AHB>, <&topcrm SD1_WCLK>; - clock-names = "biu", "ciu"; - max-frequency = <167000000>; - cap-sdio-irq; - cap-sd-highspeed; - status = "disabled"; - }; - - dma: dma-controller@1460000 { - compatible = "zte,zx296702-dma"; - reg = <0x01460000 0x1000>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&osc24m>; - clock-names = "dmaclk"; - #dma-cells = <1>; - dma-channels = <32>; - dma-requests = <32>; - }; - - lsp0crm: clock-controller@1420000 { - compatible = "zte,zx296718-lsp0crm"; - reg = <0x01420000 0x1000>; - #clock-cells = <1>; - }; - - bgpio0: gpio@142d000 { - compatible = "zte,zx296718-gpio", "zte,zx296702-gpio"; - reg = <0x142d000 0x40>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pmm 0 48 16>; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gic>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - bgpio1: gpio@142d040 { - compatible = "zte,zx296718-gpio", "zte,zx296702-gpio"; - reg = <0x142d040 0x40>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pmm 0 80 16>; - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gic>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - bgpio2: gpio@142d080 { - compatible = "zte,zx296718-gpio", "zte,zx296702-gpio"; - reg = <0x142d080 0x40>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pmm 0 80 3 - &pmm 3 32 4 - &pmm 7 83 9>; - interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gic>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - bgpio3: gpio@142d0c0 { - compatible = "zte,zx296718-gpio", "zte,zx296702-gpio"; - reg = <0x142d0c0 0x40>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pmm 0 92 16>; - interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gic>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - bgpio4: gpio@142d100 { - compatible = "zte,zx296718-gpio", "zte,zx296702-gpio"; - reg = <0x142d100 0x40>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pmm 0 108 12 - &pmm 12 121 4>; - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gic>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - bgpio5: gpio@142d140 { - compatible = "zte,zx296718-gpio", "zte,zx296702-gpio"; - reg = <0x142d140 0x40>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pmm 0 125 16>; - interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gic>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - bgpio6: gpio@142d180 { - compatible = "zte,zx296718-gpio", "zte,zx296702-gpio"; - reg = <0x142d180 0x40>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pmm 0 141 2>; - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gic>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - lsp1crm: clock-controller@1430000 { - compatible = "zte,zx296718-lsp1crm"; - reg = <0x01430000 0x1000>; - #clock-cells = <1>; - }; - - pwm: pwm@1439000 { - compatible = "zte,zx296718-pwm"; - reg = <0x1439000 0x1000>; - clocks = <&lsp1crm LSP1_PWM_PCLK>, - <&lsp1crm LSP1_PWM_WCLK>; - clock-names = "pclk", "wclk"; - #pwm-cells = <3>; - status = "disabled"; - }; - - vou: vou@1440000 { - compatible = "zte,zx296718-vou"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x1440000 0x10000>; - - dpc: dpc@0 { - compatible = "zte,zx296718-dpc"; - reg = <0x0000 0x1000>, <0x1000 0x1000>, - <0x5000 0x1000>, <0x6000 0x1000>, - <0xa000 0x1000>; - reg-names = "osd", "timing_ctrl", - "dtrc", "vou_ctrl", - "otfppu"; - interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&topcrm VOU_ACLK>, <&topcrm VOU_PPU_WCLK>, - <&topcrm VOU_MAIN_WCLK>, <&topcrm VOU_AUX_WCLK>; - clock-names = "aclk", "ppu_wclk", - "main_wclk", "aux_wclk"; - }; - - vga: vga@8000 { - compatible = "zte,zx296718-vga"; - reg = <0x8000 0x1000>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&topcrm VGA_I2C_WCLK>; - clock-names = "i2c_wclk"; - zte,vga-power-control = <&sysctrl 0x170 0xe0>; - status = "disabled"; - }; - - hdmi: hdmi@c000 { - compatible = "zte,zx296718-hdmi"; - reg = <0xc000 0x4000>; - interrupts = <GIC_SPI 82 IRQ_TYPE_EDGE_RISING>; - clocks = <&topcrm HDMI_OSC_CEC>, - <&topcrm HDMI_OSC_CLK>, - <&topcrm HDMI_XCLK>; - clock-names = "osc_cec", "osc_clk", "xclk"; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - tvenc: tvenc@2000 { - compatible = "zte,zx296718-tvenc"; - reg = <0x2000 0x1000>; - zte,tvenc-power-control = <&sysctrl 0x170 0x10>; - status = "disabled"; - }; - }; - - topcrm: clock-controller@1461000 { - compatible = "zte,zx296718-topcrm"; - reg = <0x01461000 0x1000>; - #clock-cells = <1>; - }; - - pmm: pin-controller@1462000 { - compatible = "zte,zx296718-pmm"; - reg = <0x1462000 0x1000>; - zte,auxiliary-controller = <&iocfg>; - }; - - sysctrl: sysctrl@1463000 { - compatible = "zte,zx296718-sysctrl", "syscon"; - reg = <0x1463000 0x1000>; - }; - - emmc: mmc@1470000{ - compatible = "zte,zx296718-dw-mshc"; - reg = <0x01470000 0x1000>; - interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - zte,aon-syscon = <&aon_sysctrl>; - bus-width = <8>; - fifo-depth = <128>; - data-addr = <0x200>; - fifo-watermark-aligned; - clock-frequency = <167000000>; - clocks = <&topcrm EMMC_NAND_AHB>, <&topcrm EMMC_WCLK>; - clock-names = "biu", "ciu"; - max-frequency = <167000000>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - non-removable; - disable-wp; - status = "disabled"; - }; - - audiocrm: clock-controller@1480000 { - compatible = "zte,zx296718-audiocrm"; - reg = <0x01480000 0x1000>; - #clock-cells = <1>; - }; - - i2s0: i2s@1482000 { - compatible = "zte,zx296718-i2s", "zte,zx296702-i2s"; - reg = <0x01482000 0x1000>; - clocks = <&audiocrm AUDIO_I2S0_WCLK>, - <&audiocrm AUDIO_I2S0_PCLK>; - clock-names = "wclk", "pclk"; - assigned-clocks = <&audiocrm I2S0_WCLK_MUX>; - assigned-clock-parents = <&topcrm AUDIO_99M>; - interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dma 22>, <&dma 23>; - dma-names = "tx", "rx"; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - i2c0: i2c@1486000 { - compatible = "zte,zx296718-i2c"; - reg = <0x01486000 0x1000>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&audiocrm AUDIO_I2C0_WCLK>; - clock-frequency = <1600000>; - status = "disabled"; - - aud96p22: codec@22 { - compatible = "zte,zx-aud96p22"; - #sound-dai-cells = <0>; - reg = <0x22>; - }; - }; - - spdif0: spdif@1488000 { - compatible = "zte,zx296702-spdif"; - reg = <0x1488000 0x1000>; - clocks = <&audiocrm AUDIO_SPDIF0_WCLK>; - clock-names = "tx"; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - #sound-dai-cells = <0>; - dmas = <&dma 30>; - dma-names = "tx"; - status = "disabled"; - }; - }; -}; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 01aa3eee90e8..d612f633b771 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -263,6 +263,7 @@ CONFIG_MTD_NAND_MARVELL=y CONFIG_MTD_NAND_FSL_IFC=y CONFIG_MTD_NAND_QCOM=y CONFIG_MTD_SPI_NOR=y +CONFIG_MTK_DEVAPC=m CONFIG_SPI_CADENCE_QUADSPI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=m @@ -351,6 +352,7 @@ CONFIG_QCOM_IPA=m CONFIG_MDIO_BUS_MUX_MMIOREG=y CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y CONFIG_AQUANTIA_PHY=y +CONFIG_BCM54140_PHY=m CONFIG_MARVELL_PHY=m CONFIG_MARVELL_10G_PHY=m CONFIG_MESON_GXL_PHY=m @@ -387,10 +389,12 @@ CONFIG_KEYBOARD_IMX_SC_KEY=m CONFIG_KEYBOARD_CROS_EC=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=m +CONFIG_TOUCHSCREEN_GOODIX=m CONFIG_TOUCHSCREEN_EDT_FT5X06=m CONFIG_INPUT_MISC=y CONFIG_INPUT_PM8941_PWRKEY=y CONFIG_INPUT_PM8XXX_VIBRATOR=m +CONFIG_INPUT_PWM_VIBRA=m CONFIG_INPUT_HISI_POWERKEY=y # CONFIG_SERIO_SERPORT is not set CONFIG_SERIO_AMBAKMI=y @@ -479,6 +483,7 @@ CONFIG_SPI_S3C64XX=y CONFIG_SPI_SH_MSIOF=m CONFIG_SPI_SUN6I=y CONFIG_SPI_SPIDEV=m +CONFIG_MTK_PMIC_WRAP=m CONFIG_SPMI=y CONFIG_PINCTRL_SINGLE=y CONFIG_PINCTRL_MAX77620=y @@ -505,6 +510,7 @@ CONFIG_PINCTRL_SC7180=y CONFIG_PINCTRL_SDM845=y CONFIG_PINCTRL_SM8150=y CONFIG_PINCTRL_SM8250=y +CONFIG_PINCTRL_LPASS_LPI=m CONFIG_GPIO_ALTERA=m CONFIG_GPIO_DAVINCI=y CONFIG_GPIO_DWAPB=y @@ -535,6 +541,7 @@ CONFIG_BATTERY_SBS=m CONFIG_BATTERY_BQ27XXX=y CONFIG_SENSORS_ARM_SCMI=y CONFIG_BATTERY_MAX17042=m +CONFIG_CHARGER_BQ25890=m CONFIG_CHARGER_BQ25980=m CONFIG_SENSORS_ARM_SCPI=y CONFIG_SENSORS_LM90=m @@ -559,6 +566,7 @@ CONFIG_BCM2835_THERMAL=m CONFIG_BRCMSTB_THERMAL=m CONFIG_EXYNOS_THERMAL=y CONFIG_TEGRA_BPMP_THERMAL=m +CONFIG_TEGRA_SOCTHERM=m CONFIG_QCOM_TSENS=y CONFIG_QCOM_SPMI_TEMP_ALARM=m CONFIG_UNIPHIER_THERMAL=y @@ -602,7 +610,9 @@ CONFIG_REGULATOR_HI6421V530=y CONFIG_REGULATOR_HI655X=y CONFIG_REGULATOR_MAX77620=y CONFIG_REGULATOR_MAX8973=y +CONFIG_REGULATOR_MP8859=y CONFIG_REGULATOR_PCA9450=y +CONFIG_REGULATOR_PF8X00=y CONFIG_REGULATOR_PFUZE100=y CONFIG_REGULATOR_PWM=y CONFIG_REGULATOR_QCOM_RPMH=y @@ -683,6 +693,7 @@ CONFIG_DRM_SII902X=m CONFIG_DRM_SIMPLE_BRIDGE=m CONFIG_DRM_THINE_THC63LVD1024=m CONFIG_DRM_TI_SN65DSI86=m +CONFIG_DRM_LONTIUM_LT9611UXC=m CONFIG_DRM_I2C_ADV7511=m CONFIG_DRM_I2C_ADV7511_AUDIO=y CONFIG_DRM_DW_HDMI_AHB_AUDIO=m @@ -716,14 +727,17 @@ CONFIG_SND_SOC_FSL_ASRC=m CONFIG_SND_SOC_FSL_MICFIL=m CONFIG_SND_SOC_FSL_EASRC=m CONFIG_SND_IMX_SOC=m +CONFIG_SND_SOC_IMX_SGTL5000=m CONFIG_SND_SOC_IMX_SPDIF=m CONFIG_SND_SOC_IMX_AUDMIX=m +CONFIG_SND_SOC_FSL_ASOC_CARD=m CONFIG_SND_MESON_AXG_SOUND_CARD=m CONFIG_SND_MESON_GX_SOUND_CARD=m CONFIG_SND_SOC_QCOM=m CONFIG_SND_SOC_APQ8016_SBC=m CONFIG_SND_SOC_MSM8996=m CONFIG_SND_SOC_SDM845=m +CONFIG_SND_SOC_SM8250=m CONFIG_SND_SOC_ROCKCHIP=m CONFIG_SND_SOC_ROCKCHIP_SPDIF=m CONFIG_SND_SOC_ROCKCHIP_RT5645=m @@ -738,18 +752,26 @@ CONFIG_SND_SOC_TEGRA210_DMIC=m CONFIG_SND_SOC_TEGRA210_I2S=m CONFIG_SND_SOC_TEGRA186_DSPK=m CONFIG_SND_SOC_TEGRA210_ADMAIF=m +CONFIG_SND_SOC_TEGRA_AUDIO_GRAPH_CARD=m CONFIG_SND_SOC_AK4613=m CONFIG_SND_SOC_ES7134=m CONFIG_SND_SOC_ES7241=m +CONFIG_SND_SOC_GTM601=m CONFIG_SND_SOC_PCM3168A_I2C=m +CONFIG_SND_SOC_RT5659=m CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m CONFIG_SND_SOC_TAS571X=m CONFIG_SND_SOC_WCD934X=m CONFIG_SND_SOC_WM8904=m +CONFIG_SND_SOC_WM8962=m CONFIG_SND_SOC_WSA881X=m +CONFIG_SND_SOC_LPASS_WSA_MACRO=m +CONFIG_SND_SOC_LPASS_VA_MACRO=m CONFIG_SND_SIMPLE_CARD=m CONFIG_SND_AUDIO_GRAPH_CARD=m -CONFIG_I2C_HID=m +CONFIG_HID_MULTITOUCH=m +CONFIG_I2C_HID_ACPI=m +CONFIG_I2C_HID_OF=m CONFIG_USB_CONN_GPIO=m CONFIG_USB=y CONFIG_USB_OTG=y @@ -776,6 +798,7 @@ CONFIG_USB_ISP1760=y CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_CP210X=m CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_OPTION=m CONFIG_USB_HSIC_USB3503=y CONFIG_NOP_USB_XCEIV=y CONFIG_USB_GADGET=y @@ -795,6 +818,7 @@ CONFIG_USB_CONFIGFS_MASS_STORAGE=y CONFIG_USB_CONFIGFS_F_FS=y CONFIG_TYPEC=m CONFIG_TYPEC_TCPM=m +CONFIG_TYPEC_TCPCI=m CONFIG_TYPEC_FUSB302=m CONFIG_TYPEC_HD3SS3220=m CONFIG_TYPEC_TPS6598X=m @@ -828,6 +852,7 @@ CONFIG_MMC_OWL=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_LM3692X=m +CONFIG_LEDS_PCA9532=m CONFIG_LEDS_GPIO=y CONFIG_LEDS_PWM=y CONFIG_LEDS_SYSCON=y @@ -845,7 +870,9 @@ CONFIG_RTC_DRV_HYM8563=m CONFIG_RTC_DRV_MAX77686=y CONFIG_RTC_DRV_RK808=m CONFIG_RTC_DRV_PCF85363=m +CONFIG_RTC_DRV_M41T80=m CONFIG_RTC_DRV_RX8581=m +CONFIG_RTC_DRV_RV3028=m CONFIG_RTC_DRV_RV8803=m CONFIG_RTC_DRV_S5M=y CONFIG_RTC_DRV_DS3232=y @@ -901,6 +928,7 @@ CONFIG_COMMON_CLK_FSL_SAI=y CONFIG_COMMON_CLK_S2MPS11=y CONFIG_COMMON_CLK_PWM=y CONFIG_COMMON_CLK_VC5=y +CONFIG_COMMON_CLK_ZYNQMP=y CONFIG_COMMON_CLK_BD718XX=m CONFIG_CLK_RASPBERRYPI=m CONFIG_CLK_IMX8MM=y @@ -931,7 +959,9 @@ CONFIG_SM_GCC_8150=y CONFIG_SM_GCC_8250=y CONFIG_SM_GPUCC_8150=y CONFIG_SM_GPUCC_8250=y +CONFIG_SM_DISPCC_8250=y CONFIG_QCOM_HFPLL=y +CONFIG_CLK_GFM_LPASS_SM8250=m CONFIG_HWSPINLOCK=y CONFIG_HWSPINLOCK_QCOM=y CONFIG_ARM_MHU=y @@ -1007,11 +1037,13 @@ CONFIG_IIO_ST_LSM6DSX=m CONFIG_IIO_CROS_EC_LIGHT_PROX=m CONFIG_SENSORS_ISL29018=m CONFIG_VCNL4000=m +CONFIG_IIO_ST_MAGN_3AXIS=m CONFIG_IIO_CROS_EC_BARO=m CONFIG_MPL3115=m CONFIG_PWM=y CONFIG_PWM_BCM2835=m CONFIG_PWM_CROS_EC=m +CONFIG_PWM_IMX27=m CONFIG_PWM_MESON=m CONFIG_PWM_RCAR=m CONFIG_PWM_ROCKCHIP=y @@ -1060,6 +1092,7 @@ CONFIG_ROCKCHIP_EFUSE=y CONFIG_NVMEM_SUNXI_SID=y CONFIG_UNIPHIER_EFUSE=y CONFIG_MESON_EFUSE=m +CONFIG_NVMEM_RMEM=m CONFIG_FPGA=y CONFIG_FPGA_MGR_STRATIX10_SOC=m CONFIG_FPGA_BRIDGE=m @@ -1073,6 +1106,8 @@ CONFIG_SLIM_QCOM_CTRL=m CONFIG_SLIM_QCOM_NGD_CTRL=m CONFIG_MUX_MMIO=y CONFIG_INTERCONNECT=y +CONFIG_INTERCONNECT_IMX=m +CONFIG_INTERCONNECT_IMX8MQ=m CONFIG_INTERCONNECT_QCOM=y CONFIG_INTERCONNECT_QCOM_MSM8916=m CONFIG_INTERCONNECT_QCOM_OSM_L3=m @@ -1092,6 +1127,7 @@ CONFIG_FUSE_FS=m CONFIG_CUSE=m CONFIG_OVERLAY_FS=m CONFIG_VFAT_FS=y +CONFIG_TMPFS_POSIX_ACL=y CONFIG_HUGETLBFS=y CONFIG_CONFIGFS_FS=y CONFIG_EFIVAR_FS=y diff --git a/arch/arm64/crypto/aes-glue.c b/arch/arm64/crypto/aes-glue.c index 34b8a89197be..17e735931a0c 100644 --- a/arch/arm64/crypto/aes-glue.c +++ b/arch/arm64/crypto/aes-glue.c @@ -24,6 +24,7 @@ #ifdef USE_V8_CRYPTO_EXTENSIONS #define MODE "ce" #define PRIO 300 +#define STRIDE 5 #define aes_expandkey ce_aes_expandkey #define aes_ecb_encrypt ce_aes_ecb_encrypt #define aes_ecb_decrypt ce_aes_ecb_decrypt @@ -41,6 +42,7 @@ MODULE_DESCRIPTION("AES-ECB/CBC/CTR/XTS using ARMv8 Crypto Extensions"); #else #define MODE "neon" #define PRIO 200 +#define STRIDE 4 #define aes_ecb_encrypt neon_aes_ecb_encrypt #define aes_ecb_decrypt neon_aes_ecb_decrypt #define aes_cbc_encrypt neon_aes_cbc_encrypt @@ -55,7 +57,7 @@ MODULE_DESCRIPTION("AES-ECB/CBC/CTR/XTS using ARMv8 Crypto Extensions"); #define aes_mac_update neon_aes_mac_update MODULE_DESCRIPTION("AES-ECB/CBC/CTR/XTS using ARMv8 NEON"); #endif -#if defined(USE_V8_CRYPTO_EXTENSIONS) || !defined(CONFIG_CRYPTO_AES_ARM64_BS) +#if defined(USE_V8_CRYPTO_EXTENSIONS) || !IS_ENABLED(CONFIG_CRYPTO_AES_ARM64_BS) MODULE_ALIAS_CRYPTO("ecb(aes)"); MODULE_ALIAS_CRYPTO("cbc(aes)"); MODULE_ALIAS_CRYPTO("ctr(aes)"); @@ -87,7 +89,7 @@ asmlinkage void aes_cbc_cts_decrypt(u8 out[], u8 const in[], u32 const rk[], int rounds, int bytes, u8 const iv[]); asmlinkage void aes_ctr_encrypt(u8 out[], u8 const in[], u32 const rk[], - int rounds, int blocks, u8 ctr[]); + int rounds, int bytes, u8 ctr[], u8 finalbuf[]); asmlinkage void aes_xts_encrypt(u8 out[], u8 const in[], u32 const rk1[], int rounds, int bytes, u32 const rk2[], u8 iv[], @@ -103,9 +105,9 @@ asmlinkage void aes_essiv_cbc_decrypt(u8 out[], u8 const in[], u32 const rk1[], int rounds, int blocks, u8 iv[], u32 const rk2[]); -asmlinkage void aes_mac_update(u8 const in[], u32 const rk[], int rounds, - int blocks, u8 dg[], int enc_before, - int enc_after); +asmlinkage int aes_mac_update(u8 const in[], u32 const rk[], int rounds, + int blocks, u8 dg[], int enc_before, + int enc_after); struct crypto_aes_xts_ctx { struct crypto_aes_ctx key1; @@ -448,34 +450,36 @@ static int ctr_encrypt(struct skcipher_request *req) struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm); int err, rounds = 6 + ctx->key_length / 4; struct skcipher_walk walk; - int blocks; err = skcipher_walk_virt(&walk, req, false); - while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) { - kernel_neon_begin(); - aes_ctr_encrypt(walk.dst.virt.addr, walk.src.virt.addr, - ctx->key_enc, rounds, blocks, walk.iv); - kernel_neon_end(); - err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE); - } - if (walk.nbytes) { - u8 __aligned(8) tail[AES_BLOCK_SIZE]; + while (walk.nbytes > 0) { + const u8 *src = walk.src.virt.addr; unsigned int nbytes = walk.nbytes; - u8 *tdst = walk.dst.virt.addr; - u8 *tsrc = walk.src.virt.addr; + u8 *dst = walk.dst.virt.addr; + u8 buf[AES_BLOCK_SIZE]; + unsigned int tail; - /* - * Tell aes_ctr_encrypt() to process a tail block. - */ - blocks = -1; + if (unlikely(nbytes < AES_BLOCK_SIZE)) + src = memcpy(buf, src, nbytes); + else if (nbytes < walk.total) + nbytes &= ~(AES_BLOCK_SIZE - 1); kernel_neon_begin(); - aes_ctr_encrypt(tail, NULL, ctx->key_enc, rounds, - blocks, walk.iv); + aes_ctr_encrypt(dst, src, ctx->key_enc, rounds, nbytes, + walk.iv, buf); kernel_neon_end(); - crypto_xor_cpy(tdst, tsrc, tail, nbytes); - err = skcipher_walk_done(&walk, 0); + + tail = nbytes % (STRIDE * AES_BLOCK_SIZE); + if (tail > 0 && tail < AES_BLOCK_SIZE) + /* + * The final partial block could not be returned using + * an overlapping store, so it was passed via buf[] + * instead. + */ + memcpy(dst + nbytes - tail, buf, tail); + + err = skcipher_walk_done(&walk, walk.nbytes - nbytes); } return err; @@ -650,7 +654,7 @@ static int __maybe_unused xts_decrypt(struct skcipher_request *req) } static struct skcipher_alg aes_algs[] = { { -#if defined(USE_V8_CRYPTO_EXTENSIONS) || !defined(CONFIG_CRYPTO_AES_ARM64_BS) +#if defined(USE_V8_CRYPTO_EXTENSIONS) || !IS_ENABLED(CONFIG_CRYPTO_AES_ARM64_BS) .base = { .cra_name = "__ecb(aes)", .cra_driver_name = "__ecb-aes-" MODE, @@ -852,10 +856,17 @@ static void mac_do_update(struct crypto_aes_ctx *ctx, u8 const in[], int blocks, int rounds = 6 + ctx->key_length / 4; if (crypto_simd_usable()) { - kernel_neon_begin(); - aes_mac_update(in, ctx->key_enc, rounds, blocks, dg, enc_before, - enc_after); - kernel_neon_end(); + int rem; + + do { + kernel_neon_begin(); + rem = aes_mac_update(in, ctx->key_enc, rounds, blocks, + dg, enc_before, enc_after); + kernel_neon_end(); + in += (blocks - rem) * AES_BLOCK_SIZE; + blocks = rem; + enc_before = 0; + } while (blocks); } else { if (enc_before) aes_encrypt(ctx, dg, dg); diff --git a/arch/arm64/crypto/aes-modes.S b/arch/arm64/crypto/aes-modes.S index cf618d8f6cec..bbdb54702aa7 100644 --- a/arch/arm64/crypto/aes-modes.S +++ b/arch/arm64/crypto/aes-modes.S @@ -321,42 +321,76 @@ AES_FUNC_END(aes_cbc_cts_decrypt) /* * aes_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds, - * int blocks, u8 ctr[]) + * int bytes, u8 ctr[], u8 finalbuf[]) */ AES_FUNC_START(aes_ctr_encrypt) stp x29, x30, [sp, #-16]! mov x29, sp - enc_prepare w3, x2, x6 + enc_prepare w3, x2, x12 ld1 {vctr.16b}, [x5] - umov x6, vctr.d[1] /* keep swabbed ctr in reg */ - rev x6, x6 - cmn w6, w4 /* 32 bit overflow? */ - bcs .Lctrloop + umov x12, vctr.d[1] /* keep swabbed ctr in reg */ + rev x12, x12 + .LctrloopNx: - subs w4, w4, #MAX_STRIDE - bmi .Lctr1x - add w7, w6, #1 + add w7, w4, #15 + sub w4, w4, #MAX_STRIDE << 4 + lsr w7, w7, #4 + mov w8, #MAX_STRIDE + cmp w7, w8 + csel w7, w7, w8, lt + adds x12, x12, x7 + mov v0.16b, vctr.16b - add w8, w6, #2 mov v1.16b, vctr.16b - add w9, w6, #3 mov v2.16b, vctr.16b - add w9, w6, #3 - rev w7, w7 mov v3.16b, vctr.16b - rev w8, w8 ST5( mov v4.16b, vctr.16b ) - mov v1.s[3], w7 - rev w9, w9 -ST5( add w10, w6, #4 ) - mov v2.s[3], w8 -ST5( rev w10, w10 ) - mov v3.s[3], w9 -ST5( mov v4.s[3], w10 ) - ld1 {v5.16b-v7.16b}, [x1], #48 /* get 3 input blocks */ + bcs 0f + + .subsection 1 + /* apply carry to outgoing counter */ +0: umov x8, vctr.d[0] + rev x8, x8 + add x8, x8, #1 + rev x8, x8 + ins vctr.d[0], x8 + + /* apply carry to N counter blocks for N := x12 */ + adr x16, 1f + sub x16, x16, x12, lsl #3 + br x16 + hint 34 // bti c + mov v0.d[0], vctr.d[0] + hint 34 // bti c + mov v1.d[0], vctr.d[0] + hint 34 // bti c + mov v2.d[0], vctr.d[0] + hint 34 // bti c + mov v3.d[0], vctr.d[0] +ST5( hint 34 ) +ST5( mov v4.d[0], vctr.d[0] ) +1: b 2f + .previous + +2: rev x7, x12 + ins vctr.d[1], x7 + sub x7, x12, #MAX_STRIDE - 1 + sub x8, x12, #MAX_STRIDE - 2 + sub x9, x12, #MAX_STRIDE - 3 + rev x7, x7 + rev x8, x8 + mov v1.d[1], x7 + rev x9, x9 +ST5( sub x10, x12, #MAX_STRIDE - 4 ) + mov v2.d[1], x8 +ST5( rev x10, x10 ) + mov v3.d[1], x9 +ST5( mov v4.d[1], x10 ) + tbnz w4, #31, .Lctrtail + ld1 {v5.16b-v7.16b}, [x1], #48 ST4( bl aes_encrypt_block4x ) ST5( bl aes_encrypt_block5x ) eor v0.16b, v5.16b, v0.16b @@ -368,47 +402,72 @@ ST5( ld1 {v5.16b-v6.16b}, [x1], #32 ) ST5( eor v4.16b, v6.16b, v4.16b ) st1 {v0.16b-v3.16b}, [x0], #64 ST5( st1 {v4.16b}, [x0], #16 ) - add x6, x6, #MAX_STRIDE - rev x7, x6 - ins vctr.d[1], x7 cbz w4, .Lctrout b .LctrloopNx -.Lctr1x: - adds w4, w4, #MAX_STRIDE - beq .Lctrout -.Lctrloop: - mov v0.16b, vctr.16b - encrypt_block v0, w3, x2, x8, w7 - - adds x6, x6, #1 /* increment BE ctr */ - rev x7, x6 - ins vctr.d[1], x7 - bcs .Lctrcarry /* overflow? */ - -.Lctrcarrydone: - subs w4, w4, #1 - bmi .Lctrtailblock /* blocks <0 means tail block */ - ld1 {v3.16b}, [x1], #16 - eor v3.16b, v0.16b, v3.16b - st1 {v3.16b}, [x0], #16 - bne .Lctrloop .Lctrout: st1 {vctr.16b}, [x5] /* return next CTR value */ ldp x29, x30, [sp], #16 ret -.Lctrtailblock: - st1 {v0.16b}, [x0] +.Lctrtail: + /* XOR up to MAX_STRIDE * 16 - 1 bytes of in/output with v0 ... v3/v4 */ + mov x16, #16 + ands x13, x4, #0xf + csel x13, x13, x16, ne + +ST5( cmp w4, #64 - (MAX_STRIDE << 4) ) +ST5( csel x14, x16, xzr, gt ) + cmp w4, #48 - (MAX_STRIDE << 4) + csel x15, x16, xzr, gt + cmp w4, #32 - (MAX_STRIDE << 4) + csel x16, x16, xzr, gt + cmp w4, #16 - (MAX_STRIDE << 4) + ble .Lctrtail1x + + adr_l x12, .Lcts_permute_table + add x12, x12, x13 + +ST5( ld1 {v5.16b}, [x1], x14 ) + ld1 {v6.16b}, [x1], x15 + ld1 {v7.16b}, [x1], x16 + +ST4( bl aes_encrypt_block4x ) +ST5( bl aes_encrypt_block5x ) + + ld1 {v8.16b}, [x1], x13 + ld1 {v9.16b}, [x1] + ld1 {v10.16b}, [x12] + +ST4( eor v6.16b, v6.16b, v0.16b ) +ST4( eor v7.16b, v7.16b, v1.16b ) +ST4( tbl v3.16b, {v3.16b}, v10.16b ) +ST4( eor v8.16b, v8.16b, v2.16b ) +ST4( eor v9.16b, v9.16b, v3.16b ) + +ST5( eor v5.16b, v5.16b, v0.16b ) +ST5( eor v6.16b, v6.16b, v1.16b ) +ST5( tbl v4.16b, {v4.16b}, v10.16b ) +ST5( eor v7.16b, v7.16b, v2.16b ) +ST5( eor v8.16b, v8.16b, v3.16b ) +ST5( eor v9.16b, v9.16b, v4.16b ) + +ST5( st1 {v5.16b}, [x0], x14 ) + st1 {v6.16b}, [x0], x15 + st1 {v7.16b}, [x0], x16 + add x13, x13, x0 + st1 {v9.16b}, [x13] // overlapping stores + st1 {v8.16b}, [x0] b .Lctrout -.Lctrcarry: - umov x7, vctr.d[0] /* load upper word of ctr */ - rev x7, x7 /* ... to handle the carry */ - add x7, x7, #1 - rev x7, x7 - ins vctr.d[0], x7 - b .Lctrcarrydone +.Lctrtail1x: + csel x0, x0, x6, eq // use finalbuf if less than a full block + ld1 {v5.16b}, [x1] +ST5( mov v3.16b, v4.16b ) + encrypt_block v3, w3, x2, x8, w7 + eor v5.16b, v5.16b, v3.16b + st1 {v5.16b}, [x0] + b .Lctrout AES_FUNC_END(aes_ctr_encrypt) @@ -619,61 +678,47 @@ AES_FUNC_END(aes_xts_decrypt) * int blocks, u8 dg[], int enc_before, int enc_after) */ AES_FUNC_START(aes_mac_update) - frame_push 6 - - mov x19, x0 - mov x20, x1 - mov x21, x2 - mov x22, x3 - mov x23, x4 - mov x24, x6 - - ld1 {v0.16b}, [x23] /* get dg */ + ld1 {v0.16b}, [x4] /* get dg */ enc_prepare w2, x1, x7 cbz w5, .Lmacloop4x encrypt_block v0, w2, x1, x7, w8 .Lmacloop4x: - subs w22, w22, #4 + subs w3, w3, #4 bmi .Lmac1x - ld1 {v1.16b-v4.16b}, [x19], #64 /* get next pt block */ + ld1 {v1.16b-v4.16b}, [x0], #64 /* get next pt block */ eor v0.16b, v0.16b, v1.16b /* ..and xor with dg */ - encrypt_block v0, w21, x20, x7, w8 + encrypt_block v0, w2, x1, x7, w8 eor v0.16b, v0.16b, v2.16b - encrypt_block v0, w21, x20, x7, w8 + encrypt_block v0, w2, x1, x7, w8 eor v0.16b, v0.16b, v3.16b - encrypt_block v0, w21, x20, x7, w8 + encrypt_block v0, w2, x1, x7, w8 eor v0.16b, v0.16b, v4.16b - cmp w22, wzr - csinv x5, x24, xzr, eq + cmp w3, wzr + csinv x5, x6, xzr, eq cbz w5, .Lmacout - encrypt_block v0, w21, x20, x7, w8 - st1 {v0.16b}, [x23] /* return dg */ - cond_yield_neon .Lmacrestart + encrypt_block v0, w2, x1, x7, w8 + st1 {v0.16b}, [x4] /* return dg */ + cond_yield .Lmacout, x7 b .Lmacloop4x .Lmac1x: - add w22, w22, #4 + add w3, w3, #4 .Lmacloop: - cbz w22, .Lmacout - ld1 {v1.16b}, [x19], #16 /* get next pt block */ + cbz w3, .Lmacout + ld1 {v1.16b}, [x0], #16 /* get next pt block */ eor v0.16b, v0.16b, v1.16b /* ..and xor with dg */ - subs w22, w22, #1 - csinv x5, x24, xzr, eq + subs w3, w3, #1 + csinv x5, x6, xzr, eq cbz w5, .Lmacout .Lmacenc: - encrypt_block v0, w21, x20, x7, w8 + encrypt_block v0, w2, x1, x7, w8 b .Lmacloop .Lmacout: - st1 {v0.16b}, [x23] /* return dg */ - frame_pop + st1 {v0.16b}, [x4] /* return dg */ + mov w0, w3 ret - -.Lmacrestart: - ld1 {v0.16b}, [x23] /* get dg */ - enc_prepare w21, x20, x0 - b .Lmacloop4x AES_FUNC_END(aes_mac_update) diff --git a/arch/arm64/crypto/aes-neonbs-core.S b/arch/arm64/crypto/aes-neonbs-core.S index 63a52ad9a75c..a3405b8c344b 100644 --- a/arch/arm64/crypto/aes-neonbs-core.S +++ b/arch/arm64/crypto/aes-neonbs-core.S @@ -613,7 +613,6 @@ SYM_FUNC_END(aesbs_decrypt8) st1 {\o7\().16b}, [x19], #16 cbz x23, 1f - cond_yield_neon b 99b 1: frame_pop @@ -715,7 +714,6 @@ SYM_FUNC_START(aesbs_cbc_decrypt) 1: st1 {v24.16b}, [x24] // store IV cbz x23, 2f - cond_yield_neon b 99b 2: frame_pop @@ -801,7 +799,7 @@ SYM_FUNC_END(__xts_crypt8) mov x23, x4 mov x24, x5 -0: movi v30.2s, #0x1 + movi v30.2s, #0x1 movi v25.2s, #0x87 uzp1 v30.4s, v30.4s, v25.4s ld1 {v25.16b}, [x24] @@ -846,7 +844,6 @@ SYM_FUNC_END(__xts_crypt8) cbz x23, 1f st1 {v25.16b}, [x24] - cond_yield_neon 0b b 99b 1: st1 {v25.16b}, [x24] @@ -889,7 +886,7 @@ SYM_FUNC_START(aesbs_ctr_encrypt) cset x26, ne add x23, x23, x26 // do one extra block if final -98: ldp x7, x8, [x24] + ldp x7, x8, [x24] ld1 {v0.16b}, [x24] CPU_LE( rev x7, x7 ) CPU_LE( rev x8, x8 ) @@ -967,7 +964,6 @@ CPU_LE( rev x8, x8 ) st1 {v0.16b}, [x24] cbz x23, .Lctr_done - cond_yield_neon 98b b 99b .Lctr_done: diff --git a/arch/arm64/crypto/crct10dif-ce-core.S b/arch/arm64/crypto/crct10dif-ce-core.S index 111d9c9abddd..dce6dcebfca1 100644 --- a/arch/arm64/crypto/crct10dif-ce-core.S +++ b/arch/arm64/crypto/crct10dif-ce-core.S @@ -68,10 +68,10 @@ .text .arch armv8-a+crypto - init_crc .req w19 - buf .req x20 - len .req x21 - fold_consts_ptr .req x22 + init_crc .req w0 + buf .req x1 + len .req x2 + fold_consts_ptr .req x3 fold_consts .req v10 @@ -257,12 +257,6 @@ CPU_LE( ext v12.16b, v12.16b, v12.16b, #8 ) .endm .macro crc_t10dif_pmull, p - frame_push 4, 128 - - mov init_crc, w0 - mov buf, x1 - mov len, x2 - __pmull_init_\p // For sizes less than 256 bytes, we can't fold 128 bytes at a time. @@ -317,26 +311,7 @@ CPU_LE( ext v7.16b, v7.16b, v7.16b, #8 ) fold_32_bytes \p, v6, v7 subs len, len, #128 - b.lt .Lfold_128_bytes_loop_done_\@ - - if_will_cond_yield_neon - stp q0, q1, [sp, #.Lframe_local_offset] - stp q2, q3, [sp, #.Lframe_local_offset + 32] - stp q4, q5, [sp, #.Lframe_local_offset + 64] - stp q6, q7, [sp, #.Lframe_local_offset + 96] - do_cond_yield_neon - ldp q0, q1, [sp, #.Lframe_local_offset] - ldp q2, q3, [sp, #.Lframe_local_offset + 32] - ldp q4, q5, [sp, #.Lframe_local_offset + 64] - ldp q6, q7, [sp, #.Lframe_local_offset + 96] - ld1 {fold_consts.2d}, [fold_consts_ptr] - __pmull_init_\p - __pmull_pre_\p fold_consts - endif_yield_neon - - b .Lfold_128_bytes_loop_\@ - -.Lfold_128_bytes_loop_done_\@: + b.ge .Lfold_128_bytes_loop_\@ // Now fold the 112 bytes in v0-v6 into the 16 bytes in v7. @@ -453,7 +428,9 @@ CPU_LE( ext v0.16b, v0.16b, v0.16b, #8 ) // Final CRC value (x^16 * M(x)) mod G(x) is in low 16 bits of v0. umov w0, v0.h[0] - frame_pop + .ifc \p, p8 + ldp x29, x30, [sp], #16 + .endif ret .Lless_than_256_bytes_\@: @@ -489,7 +466,9 @@ CPU_LE( ext v7.16b, v7.16b, v7.16b, #8 ) // Assumes len >= 16. // SYM_FUNC_START(crc_t10dif_pmull_p8) - crc_t10dif_pmull p8 + stp x29, x30, [sp, #-16]! + mov x29, sp + crc_t10dif_pmull p8 SYM_FUNC_END(crc_t10dif_pmull_p8) .align 5 diff --git a/arch/arm64/crypto/crct10dif-ce-glue.c b/arch/arm64/crypto/crct10dif-ce-glue.c index ccc3f6067742..09eb1456aed4 100644 --- a/arch/arm64/crypto/crct10dif-ce-glue.c +++ b/arch/arm64/crypto/crct10dif-ce-glue.c @@ -37,9 +37,18 @@ static int crct10dif_update_pmull_p8(struct shash_desc *desc, const u8 *data, u16 *crc = shash_desc_ctx(desc); if (length >= CRC_T10DIF_PMULL_CHUNK_SIZE && crypto_simd_usable()) { - kernel_neon_begin(); - *crc = crc_t10dif_pmull_p8(*crc, data, length); - kernel_neon_end(); + do { + unsigned int chunk = length; + + if (chunk > SZ_4K + CRC_T10DIF_PMULL_CHUNK_SIZE) + chunk = SZ_4K; + + kernel_neon_begin(); + *crc = crc_t10dif_pmull_p8(*crc, data, chunk); + kernel_neon_end(); + data += chunk; + length -= chunk; + } while (length); } else { *crc = crc_t10dif_generic(*crc, data, length); } @@ -53,9 +62,18 @@ static int crct10dif_update_pmull_p64(struct shash_desc *desc, const u8 *data, u16 *crc = shash_desc_ctx(desc); if (length >= CRC_T10DIF_PMULL_CHUNK_SIZE && crypto_simd_usable()) { - kernel_neon_begin(); - *crc = crc_t10dif_pmull_p64(*crc, data, length); - kernel_neon_end(); + do { + unsigned int chunk = length; + + if (chunk > SZ_4K + CRC_T10DIF_PMULL_CHUNK_SIZE) + chunk = SZ_4K; + + kernel_neon_begin(); + *crc = crc_t10dif_pmull_p64(*crc, data, chunk); + kernel_neon_end(); + data += chunk; + length -= chunk; + } while (length); } else { *crc = crc_t10dif_generic(*crc, data, length); } diff --git a/arch/arm64/crypto/sha1-ce-core.S b/arch/arm64/crypto/sha1-ce-core.S index 92d0d2753e81..8c02bbc2684e 100644 --- a/arch/arm64/crypto/sha1-ce-core.S +++ b/arch/arm64/crypto/sha1-ce-core.S @@ -62,40 +62,34 @@ .endm /* - * void sha1_ce_transform(struct sha1_ce_state *sst, u8 const *src, - * int blocks) + * int sha1_ce_transform(struct sha1_ce_state *sst, u8 const *src, + * int blocks) */ SYM_FUNC_START(sha1_ce_transform) - frame_push 3 - - mov x19, x0 - mov x20, x1 - mov x21, x2 - /* load round constants */ -0: loadrc k0.4s, 0x5a827999, w6 + loadrc k0.4s, 0x5a827999, w6 loadrc k1.4s, 0x6ed9eba1, w6 loadrc k2.4s, 0x8f1bbcdc, w6 loadrc k3.4s, 0xca62c1d6, w6 /* load state */ - ld1 {dgav.4s}, [x19] - ldr dgb, [x19, #16] + ld1 {dgav.4s}, [x0] + ldr dgb, [x0, #16] /* load sha1_ce_state::finalize */ ldr_l w4, sha1_ce_offsetof_finalize, x4 - ldr w4, [x19, x4] + ldr w4, [x0, x4] /* load input */ -1: ld1 {v8.4s-v11.4s}, [x20], #64 - sub w21, w21, #1 +0: ld1 {v8.4s-v11.4s}, [x1], #64 + sub w2, w2, #1 CPU_LE( rev32 v8.16b, v8.16b ) CPU_LE( rev32 v9.16b, v9.16b ) CPU_LE( rev32 v10.16b, v10.16b ) CPU_LE( rev32 v11.16b, v11.16b ) -2: add t0.4s, v8.4s, k0.4s +1: add t0.4s, v8.4s, k0.4s mov dg0v.16b, dgav.16b add_update c, ev, k0, 8, 9, 10, 11, dgb @@ -126,25 +120,18 @@ CPU_LE( rev32 v11.16b, v11.16b ) add dgbv.2s, dgbv.2s, dg1v.2s add dgav.4s, dgav.4s, dg0v.4s - cbz w21, 3f - - if_will_cond_yield_neon - st1 {dgav.4s}, [x19] - str dgb, [x19, #16] - do_cond_yield_neon + cbz w2, 2f + cond_yield 3f, x5 b 0b - endif_yield_neon - - b 1b /* * Final block: add padding and total bit count. * Skip if the input size was not a round multiple of the block size, * the padding is handled by the C code in that case. */ -3: cbz x4, 4f +2: cbz x4, 3f ldr_l w4, sha1_ce_offsetof_count, x4 - ldr x4, [x19, x4] + ldr x4, [x0, x4] movi v9.2d, #0 mov x8, #0x80000000 movi v10.2d, #0 @@ -153,11 +140,11 @@ CPU_LE( rev32 v11.16b, v11.16b ) mov x4, #0 mov v11.d[0], xzr mov v11.d[1], x7 - b 2b + b 1b /* store new state */ -4: st1 {dgav.4s}, [x19] - str dgb, [x19, #16] - frame_pop +3: st1 {dgav.4s}, [x0] + str dgb, [x0, #16] + mov w0, w2 ret SYM_FUNC_END(sha1_ce_transform) diff --git a/arch/arm64/crypto/sha1-ce-glue.c b/arch/arm64/crypto/sha1-ce-glue.c index c93121bcfdeb..71fa4f1122d7 100644 --- a/arch/arm64/crypto/sha1-ce-glue.c +++ b/arch/arm64/crypto/sha1-ce-glue.c @@ -19,6 +19,7 @@ MODULE_DESCRIPTION("SHA1 secure hash using ARMv8 Crypto Extensions"); MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); MODULE_LICENSE("GPL v2"); +MODULE_ALIAS_CRYPTO("sha1"); struct sha1_ce_state { struct sha1_state sst; @@ -28,14 +29,22 @@ struct sha1_ce_state { extern const u32 sha1_ce_offsetof_count; extern const u32 sha1_ce_offsetof_finalize; -asmlinkage void sha1_ce_transform(struct sha1_ce_state *sst, u8 const *src, - int blocks); +asmlinkage int sha1_ce_transform(struct sha1_ce_state *sst, u8 const *src, + int blocks); static void __sha1_ce_transform(struct sha1_state *sst, u8 const *src, int blocks) { - sha1_ce_transform(container_of(sst, struct sha1_ce_state, sst), src, - blocks); + while (blocks) { + int rem; + + kernel_neon_begin(); + rem = sha1_ce_transform(container_of(sst, struct sha1_ce_state, + sst), src, blocks); + kernel_neon_end(); + src += (blocks - rem) * SHA1_BLOCK_SIZE; + blocks = rem; + } } const u32 sha1_ce_offsetof_count = offsetof(struct sha1_ce_state, sst.count); @@ -50,9 +59,7 @@ static int sha1_ce_update(struct shash_desc *desc, const u8 *data, return crypto_sha1_update(desc, data, len); sctx->finalize = 0; - kernel_neon_begin(); sha1_base_do_update(desc, data, len, __sha1_ce_transform); - kernel_neon_end(); return 0; } @@ -72,11 +79,9 @@ static int sha1_ce_finup(struct shash_desc *desc, const u8 *data, */ sctx->finalize = finalize; - kernel_neon_begin(); sha1_base_do_update(desc, data, len, __sha1_ce_transform); if (!finalize) sha1_base_do_finalize(desc, __sha1_ce_transform); - kernel_neon_end(); return sha1_base_finish(desc, out); } @@ -88,9 +93,7 @@ static int sha1_ce_final(struct shash_desc *desc, u8 *out) return crypto_sha1_finup(desc, NULL, 0, out); sctx->finalize = 0; - kernel_neon_begin(); sha1_base_do_finalize(desc, __sha1_ce_transform); - kernel_neon_end(); return sha1_base_finish(desc, out); } diff --git a/arch/arm64/crypto/sha2-ce-core.S b/arch/arm64/crypto/sha2-ce-core.S index 3f9d0f326987..6cdea7d56059 100644 --- a/arch/arm64/crypto/sha2-ce-core.S +++ b/arch/arm64/crypto/sha2-ce-core.S @@ -76,36 +76,30 @@ */ .text SYM_FUNC_START(sha2_ce_transform) - frame_push 3 - - mov x19, x0 - mov x20, x1 - mov x21, x2 - /* load round constants */ -0: adr_l x8, .Lsha2_rcon + adr_l x8, .Lsha2_rcon ld1 { v0.4s- v3.4s}, [x8], #64 ld1 { v4.4s- v7.4s}, [x8], #64 ld1 { v8.4s-v11.4s}, [x8], #64 ld1 {v12.4s-v15.4s}, [x8] /* load state */ - ld1 {dgav.4s, dgbv.4s}, [x19] + ld1 {dgav.4s, dgbv.4s}, [x0] /* load sha256_ce_state::finalize */ ldr_l w4, sha256_ce_offsetof_finalize, x4 - ldr w4, [x19, x4] + ldr w4, [x0, x4] /* load input */ -1: ld1 {v16.4s-v19.4s}, [x20], #64 - sub w21, w21, #1 +0: ld1 {v16.4s-v19.4s}, [x1], #64 + sub w2, w2, #1 CPU_LE( rev32 v16.16b, v16.16b ) CPU_LE( rev32 v17.16b, v17.16b ) CPU_LE( rev32 v18.16b, v18.16b ) CPU_LE( rev32 v19.16b, v19.16b ) -2: add t0.4s, v16.4s, v0.4s +1: add t0.4s, v16.4s, v0.4s mov dg0v.16b, dgav.16b mov dg1v.16b, dgbv.16b @@ -134,24 +128,18 @@ CPU_LE( rev32 v19.16b, v19.16b ) add dgbv.4s, dgbv.4s, dg1v.4s /* handled all input blocks? */ - cbz w21, 3f - - if_will_cond_yield_neon - st1 {dgav.4s, dgbv.4s}, [x19] - do_cond_yield_neon + cbz w2, 2f + cond_yield 3f, x5 b 0b - endif_yield_neon - - b 1b /* * Final block: add padding and total bit count. * Skip if the input size was not a round multiple of the block size, * the padding is handled by the C code in that case. */ -3: cbz x4, 4f +2: cbz x4, 3f ldr_l w4, sha256_ce_offsetof_count, x4 - ldr x4, [x19, x4] + ldr x4, [x0, x4] movi v17.2d, #0 mov x8, #0x80000000 movi v18.2d, #0 @@ -160,10 +148,10 @@ CPU_LE( rev32 v19.16b, v19.16b ) mov x4, #0 mov v19.d[0], xzr mov v19.d[1], x7 - b 2b + b 1b /* store new state */ -4: st1 {dgav.4s, dgbv.4s}, [x19] - frame_pop +3: st1 {dgav.4s, dgbv.4s}, [x0] + mov w0, w2 ret SYM_FUNC_END(sha2_ce_transform) diff --git a/arch/arm64/crypto/sha2-ce-glue.c b/arch/arm64/crypto/sha2-ce-glue.c index 31ba3da5e61b..c57a6119fefc 100644 --- a/arch/arm64/crypto/sha2-ce-glue.c +++ b/arch/arm64/crypto/sha2-ce-glue.c @@ -19,6 +19,8 @@ MODULE_DESCRIPTION("SHA-224/SHA-256 secure hash using ARMv8 Crypto Extensions"); MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); MODULE_LICENSE("GPL v2"); +MODULE_ALIAS_CRYPTO("sha224"); +MODULE_ALIAS_CRYPTO("sha256"); struct sha256_ce_state { struct sha256_state sst; @@ -28,14 +30,22 @@ struct sha256_ce_state { extern const u32 sha256_ce_offsetof_count; extern const u32 sha256_ce_offsetof_finalize; -asmlinkage void sha2_ce_transform(struct sha256_ce_state *sst, u8 const *src, - int blocks); +asmlinkage int sha2_ce_transform(struct sha256_ce_state *sst, u8 const *src, + int blocks); static void __sha2_ce_transform(struct sha256_state *sst, u8 const *src, int blocks) { - sha2_ce_transform(container_of(sst, struct sha256_ce_state, sst), src, - blocks); + while (blocks) { + int rem; + + kernel_neon_begin(); + rem = sha2_ce_transform(container_of(sst, struct sha256_ce_state, + sst), src, blocks); + kernel_neon_end(); + src += (blocks - rem) * SHA256_BLOCK_SIZE; + blocks = rem; + } } const u32 sha256_ce_offsetof_count = offsetof(struct sha256_ce_state, @@ -61,9 +71,7 @@ static int sha256_ce_update(struct shash_desc *desc, const u8 *data, __sha256_block_data_order); sctx->finalize = 0; - kernel_neon_begin(); sha256_base_do_update(desc, data, len, __sha2_ce_transform); - kernel_neon_end(); return 0; } @@ -88,11 +96,9 @@ static int sha256_ce_finup(struct shash_desc *desc, const u8 *data, */ sctx->finalize = finalize; - kernel_neon_begin(); sha256_base_do_update(desc, data, len, __sha2_ce_transform); if (!finalize) sha256_base_do_finalize(desc, __sha2_ce_transform); - kernel_neon_end(); return sha256_base_finish(desc, out); } @@ -106,9 +112,7 @@ static int sha256_ce_final(struct shash_desc *desc, u8 *out) } sctx->finalize = 0; - kernel_neon_begin(); sha256_base_do_finalize(desc, __sha2_ce_transform); - kernel_neon_end(); return sha256_base_finish(desc, out); } diff --git a/arch/arm64/crypto/sha3-ce-core.S b/arch/arm64/crypto/sha3-ce-core.S index 1cfb768df350..6f5208414fe3 100644 --- a/arch/arm64/crypto/sha3-ce-core.S +++ b/arch/arm64/crypto/sha3-ce-core.S @@ -37,20 +37,13 @@ .endm /* - * sha3_ce_transform(u64 *st, const u8 *data, int blocks, int dg_size) + * int sha3_ce_transform(u64 *st, const u8 *data, int blocks, int dg_size) */ .text SYM_FUNC_START(sha3_ce_transform) - frame_push 4 - - mov x19, x0 - mov x20, x1 - mov x21, x2 - mov x22, x3 - -0: /* load state */ - add x8, x19, #32 - ld1 { v0.1d- v3.1d}, [x19] + /* load state */ + add x8, x0, #32 + ld1 { v0.1d- v3.1d}, [x0] ld1 { v4.1d- v7.1d}, [x8], #32 ld1 { v8.1d-v11.1d}, [x8], #32 ld1 {v12.1d-v15.1d}, [x8], #32 @@ -58,13 +51,13 @@ SYM_FUNC_START(sha3_ce_transform) ld1 {v20.1d-v23.1d}, [x8], #32 ld1 {v24.1d}, [x8] -1: sub w21, w21, #1 +0: sub w2, w2, #1 mov w8, #24 adr_l x9, .Lsha3_rcon /* load input */ - ld1 {v25.8b-v28.8b}, [x20], #32 - ld1 {v29.8b-v31.8b}, [x20], #24 + ld1 {v25.8b-v28.8b}, [x1], #32 + ld1 {v29.8b-v31.8b}, [x1], #24 eor v0.8b, v0.8b, v25.8b eor v1.8b, v1.8b, v26.8b eor v2.8b, v2.8b, v27.8b @@ -73,10 +66,10 @@ SYM_FUNC_START(sha3_ce_transform) eor v5.8b, v5.8b, v30.8b eor v6.8b, v6.8b, v31.8b - tbnz x22, #6, 3f // SHA3-512 + tbnz x3, #6, 2f // SHA3-512 - ld1 {v25.8b-v28.8b}, [x20], #32 - ld1 {v29.8b-v30.8b}, [x20], #16 + ld1 {v25.8b-v28.8b}, [x1], #32 + ld1 {v29.8b-v30.8b}, [x1], #16 eor v7.8b, v7.8b, v25.8b eor v8.8b, v8.8b, v26.8b eor v9.8b, v9.8b, v27.8b @@ -84,34 +77,34 @@ SYM_FUNC_START(sha3_ce_transform) eor v11.8b, v11.8b, v29.8b eor v12.8b, v12.8b, v30.8b - tbnz x22, #4, 2f // SHA3-384 or SHA3-224 + tbnz x3, #4, 1f // SHA3-384 or SHA3-224 // SHA3-256 - ld1 {v25.8b-v28.8b}, [x20], #32 + ld1 {v25.8b-v28.8b}, [x1], #32 eor v13.8b, v13.8b, v25.8b eor v14.8b, v14.8b, v26.8b eor v15.8b, v15.8b, v27.8b eor v16.8b, v16.8b, v28.8b - b 4f + b 3f -2: tbz x22, #2, 4f // bit 2 cleared? SHA-384 +1: tbz x3, #2, 3f // bit 2 cleared? SHA-384 // SHA3-224 - ld1 {v25.8b-v28.8b}, [x20], #32 - ld1 {v29.8b}, [x20], #8 + ld1 {v25.8b-v28.8b}, [x1], #32 + ld1 {v29.8b}, [x1], #8 eor v13.8b, v13.8b, v25.8b eor v14.8b, v14.8b, v26.8b eor v15.8b, v15.8b, v27.8b eor v16.8b, v16.8b, v28.8b eor v17.8b, v17.8b, v29.8b - b 4f + b 3f // SHA3-512 -3: ld1 {v25.8b-v26.8b}, [x20], #16 +2: ld1 {v25.8b-v26.8b}, [x1], #16 eor v7.8b, v7.8b, v25.8b eor v8.8b, v8.8b, v26.8b -4: sub w8, w8, #1 +3: sub w8, w8, #1 eor3 v29.16b, v4.16b, v9.16b, v14.16b eor3 v26.16b, v1.16b, v6.16b, v11.16b @@ -190,33 +183,19 @@ SYM_FUNC_START(sha3_ce_transform) eor v0.16b, v0.16b, v31.16b - cbnz w8, 4b - cbz w21, 5f - - if_will_cond_yield_neon - add x8, x19, #32 - st1 { v0.1d- v3.1d}, [x19] - st1 { v4.1d- v7.1d}, [x8], #32 - st1 { v8.1d-v11.1d}, [x8], #32 - st1 {v12.1d-v15.1d}, [x8], #32 - st1 {v16.1d-v19.1d}, [x8], #32 - st1 {v20.1d-v23.1d}, [x8], #32 - st1 {v24.1d}, [x8] - do_cond_yield_neon - b 0b - endif_yield_neon - - b 1b + cbnz w8, 3b + cond_yield 3f, x8 + cbnz w2, 0b /* save state */ -5: st1 { v0.1d- v3.1d}, [x19], #32 - st1 { v4.1d- v7.1d}, [x19], #32 - st1 { v8.1d-v11.1d}, [x19], #32 - st1 {v12.1d-v15.1d}, [x19], #32 - st1 {v16.1d-v19.1d}, [x19], #32 - st1 {v20.1d-v23.1d}, [x19], #32 - st1 {v24.1d}, [x19] - frame_pop +3: st1 { v0.1d- v3.1d}, [x0], #32 + st1 { v4.1d- v7.1d}, [x0], #32 + st1 { v8.1d-v11.1d}, [x0], #32 + st1 {v12.1d-v15.1d}, [x0], #32 + st1 {v16.1d-v19.1d}, [x0], #32 + st1 {v20.1d-v23.1d}, [x0], #32 + st1 {v24.1d}, [x0] + mov w0, w2 ret SYM_FUNC_END(sha3_ce_transform) diff --git a/arch/arm64/crypto/sha3-ce-glue.c b/arch/arm64/crypto/sha3-ce-glue.c index e5a2936f0886..8c65cecf560a 100644 --- a/arch/arm64/crypto/sha3-ce-glue.c +++ b/arch/arm64/crypto/sha3-ce-glue.c @@ -23,9 +23,13 @@ MODULE_DESCRIPTION("SHA3 secure hash using ARMv8 Crypto Extensions"); MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); MODULE_LICENSE("GPL v2"); +MODULE_ALIAS_CRYPTO("sha3-224"); +MODULE_ALIAS_CRYPTO("sha3-256"); +MODULE_ALIAS_CRYPTO("sha3-384"); +MODULE_ALIAS_CRYPTO("sha3-512"); -asmlinkage void sha3_ce_transform(u64 *st, const u8 *data, int blocks, - int md_len); +asmlinkage int sha3_ce_transform(u64 *st, const u8 *data, int blocks, + int md_len); static int sha3_update(struct shash_desc *desc, const u8 *data, unsigned int len) @@ -55,11 +59,15 @@ static int sha3_update(struct shash_desc *desc, const u8 *data, blocks = len / sctx->rsiz; len %= sctx->rsiz; - if (blocks) { + while (blocks) { + int rem; + kernel_neon_begin(); - sha3_ce_transform(sctx->st, data, blocks, digest_size); + rem = sha3_ce_transform(sctx->st, data, blocks, + digest_size); kernel_neon_end(); - data += blocks * sctx->rsiz; + data += (blocks - rem) * sctx->rsiz; + blocks = rem; } } diff --git a/arch/arm64/crypto/sha512-ce-core.S b/arch/arm64/crypto/sha512-ce-core.S index cde606c0323e..d6e7f6c95fa6 100644 --- a/arch/arm64/crypto/sha512-ce-core.S +++ b/arch/arm64/crypto/sha512-ce-core.S @@ -107,23 +107,17 @@ */ .text SYM_FUNC_START(sha512_ce_transform) - frame_push 3 - - mov x19, x0 - mov x20, x1 - mov x21, x2 - /* load state */ -0: ld1 {v8.2d-v11.2d}, [x19] + ld1 {v8.2d-v11.2d}, [x0] /* load first 4 round constants */ adr_l x3, .Lsha512_rcon ld1 {v20.2d-v23.2d}, [x3], #64 /* load input */ -1: ld1 {v12.2d-v15.2d}, [x20], #64 - ld1 {v16.2d-v19.2d}, [x20], #64 - sub w21, w21, #1 +0: ld1 {v12.2d-v15.2d}, [x1], #64 + ld1 {v16.2d-v19.2d}, [x1], #64 + sub w2, w2, #1 CPU_LE( rev64 v12.16b, v12.16b ) CPU_LE( rev64 v13.16b, v13.16b ) @@ -201,19 +195,12 @@ CPU_LE( rev64 v19.16b, v19.16b ) add v10.2d, v10.2d, v2.2d add v11.2d, v11.2d, v3.2d + cond_yield 3f, x4 /* handled all input blocks? */ - cbz w21, 3f - - if_will_cond_yield_neon - st1 {v8.2d-v11.2d}, [x19] - do_cond_yield_neon - b 0b - endif_yield_neon - - b 1b + cbnz w2, 0b /* store new state */ -3: st1 {v8.2d-v11.2d}, [x19] - frame_pop +3: st1 {v8.2d-v11.2d}, [x0] + mov w0, w2 ret SYM_FUNC_END(sha512_ce_transform) diff --git a/arch/arm64/crypto/sha512-ce-glue.c b/arch/arm64/crypto/sha512-ce-glue.c index faa83f6cf376..e62a094a9d52 100644 --- a/arch/arm64/crypto/sha512-ce-glue.c +++ b/arch/arm64/crypto/sha512-ce-glue.c @@ -23,12 +23,28 @@ MODULE_DESCRIPTION("SHA-384/SHA-512 secure hash using ARMv8 Crypto Extensions"); MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); MODULE_LICENSE("GPL v2"); +MODULE_ALIAS_CRYPTO("sha384"); +MODULE_ALIAS_CRYPTO("sha512"); -asmlinkage void sha512_ce_transform(struct sha512_state *sst, u8 const *src, - int blocks); +asmlinkage int sha512_ce_transform(struct sha512_state *sst, u8 const *src, + int blocks); asmlinkage void sha512_block_data_order(u64 *digest, u8 const *src, int blocks); +static void __sha512_ce_transform(struct sha512_state *sst, u8 const *src, + int blocks) +{ + while (blocks) { + int rem; + + kernel_neon_begin(); + rem = sha512_ce_transform(sst, src, blocks); + kernel_neon_end(); + src += (blocks - rem) * SHA512_BLOCK_SIZE; + blocks = rem; + } +} + static void __sha512_block_data_order(struct sha512_state *sst, u8 const *src, int blocks) { @@ -38,45 +54,30 @@ static void __sha512_block_data_order(struct sha512_state *sst, u8 const *src, static int sha512_ce_update(struct shash_desc *desc, const u8 *data, unsigned int len) { - if (!crypto_simd_usable()) - return sha512_base_do_update(desc, data, len, - __sha512_block_data_order); - - kernel_neon_begin(); - sha512_base_do_update(desc, data, len, sha512_ce_transform); - kernel_neon_end(); + sha512_block_fn *fn = crypto_simd_usable() ? __sha512_ce_transform + : __sha512_block_data_order; + sha512_base_do_update(desc, data, len, fn); return 0; } static int sha512_ce_finup(struct shash_desc *desc, const u8 *data, unsigned int len, u8 *out) { - if (!crypto_simd_usable()) { - if (len) - sha512_base_do_update(desc, data, len, - __sha512_block_data_order); - sha512_base_do_finalize(desc, __sha512_block_data_order); - return sha512_base_finish(desc, out); - } + sha512_block_fn *fn = crypto_simd_usable() ? __sha512_ce_transform + : __sha512_block_data_order; - kernel_neon_begin(); - sha512_base_do_update(desc, data, len, sha512_ce_transform); - sha512_base_do_finalize(desc, sha512_ce_transform); - kernel_neon_end(); + sha512_base_do_update(desc, data, len, fn); + sha512_base_do_finalize(desc, fn); return sha512_base_finish(desc, out); } static int sha512_ce_final(struct shash_desc *desc, u8 *out) { - if (!crypto_simd_usable()) { - sha512_base_do_finalize(desc, __sha512_block_data_order); - return sha512_base_finish(desc, out); - } + sha512_block_fn *fn = crypto_simd_usable() ? __sha512_ce_transform + : __sha512_block_data_order; - kernel_neon_begin(); - sha512_base_do_finalize(desc, sha512_ce_transform); - kernel_neon_end(); + sha512_base_do_finalize(desc, fn); return sha512_base_finish(desc, out); } diff --git a/arch/arm64/include/asm/archrandom.h b/arch/arm64/include/asm/archrandom.h index ffb1a40d5475..09e43272ccb0 100644 --- a/arch/arm64/include/asm/archrandom.h +++ b/arch/arm64/include/asm/archrandom.h @@ -4,10 +4,26 @@ #ifdef CONFIG_ARCH_RANDOM +#include <linux/arm-smccc.h> #include <linux/bug.h> #include <linux/kernel.h> #include <asm/cpufeature.h> +#define ARM_SMCCC_TRNG_MIN_VERSION 0x10000UL + +extern bool smccc_trng_available; + +static inline bool __init smccc_probe_trng(void) +{ + struct arm_smccc_res res; + + arm_smccc_1_1_invoke(ARM_SMCCC_TRNG_VERSION, &res); + if ((s32)res.a0 < 0) + return false; + + return res.a0 >= ARM_SMCCC_TRNG_MIN_VERSION; +} + static inline bool __arm64_rndr(unsigned long *v) { bool ok; @@ -38,26 +54,55 @@ static inline bool __must_check arch_get_random_int(unsigned int *v) static inline bool __must_check arch_get_random_seed_long(unsigned long *v) { + struct arm_smccc_res res; + + /* + * We prefer the SMCCC call, since its semantics (return actual + * hardware backed entropy) is closer to the idea behind this + * function here than what even the RNDRSS register provides + * (the output of a pseudo RNG freshly seeded by a TRNG). + */ + if (smccc_trng_available) { + arm_smccc_1_1_invoke(ARM_SMCCC_TRNG_RND64, 64, &res); + if ((int)res.a0 >= 0) { + *v = res.a3; + return true; + } + } + /* * Only support the generic interface after we have detected * the system wide capability, avoiding complexity with the * cpufeature code and with potential scheduling between CPUs * with and without the feature. */ - if (!cpus_have_const_cap(ARM64_HAS_RNG)) - return false; + if (cpus_have_const_cap(ARM64_HAS_RNG) && __arm64_rndr(v)) + return true; - return __arm64_rndr(v); + return false; } - static inline bool __must_check arch_get_random_seed_int(unsigned int *v) { + struct arm_smccc_res res; unsigned long val; - bool ok = arch_get_random_seed_long(&val); - *v = val; - return ok; + if (smccc_trng_available) { + arm_smccc_1_1_invoke(ARM_SMCCC_TRNG_RND64, 32, &res); + if ((int)res.a0 >= 0) { + *v = res.a3 & GENMASK(31, 0); + return true; + } + } + + if (cpus_have_const_cap(ARM64_HAS_RNG)) { + if (__arm64_rndr(&val)) { + *v = val; + return true; + } + } + + return false; } static inline bool __init __early_cpu_has_rndr(void) @@ -72,12 +117,29 @@ arch_get_random_seed_long_early(unsigned long *v) { WARN_ON(system_state != SYSTEM_BOOTING); - if (!__early_cpu_has_rndr()) - return false; + if (smccc_trng_available) { + struct arm_smccc_res res; + + arm_smccc_1_1_invoke(ARM_SMCCC_TRNG_RND64, 64, &res); + if ((int)res.a0 >= 0) { + *v = res.a3; + return true; + } + } + + if (__early_cpu_has_rndr() && __arm64_rndr(v)) + return true; - return __arm64_rndr(v); + return false; } #define arch_get_random_seed_long_early arch_get_random_seed_long_early +#else /* !CONFIG_ARCH_RANDOM */ + +static inline bool __init smccc_probe_trng(void) +{ + return false; +} + #endif /* CONFIG_ARCH_RANDOM */ #endif /* _ASM_ARCHRANDOM_H */ diff --git a/arch/arm64/include/asm/asm-uaccess.h b/arch/arm64/include/asm/asm-uaccess.h index 9990059be106..ccedf548dac9 100644 --- a/arch/arm64/include/asm/asm-uaccess.h +++ b/arch/arm64/include/asm/asm-uaccess.h @@ -15,10 +15,10 @@ .macro __uaccess_ttbr0_disable, tmp1 mrs \tmp1, ttbr1_el1 // swapper_pg_dir bic \tmp1, \tmp1, #TTBR_ASID_MASK - sub \tmp1, \tmp1, #PAGE_SIZE // reserved_pg_dir just before swapper_pg_dir + sub \tmp1, \tmp1, #RESERVED_SWAPPER_OFFSET // reserved_pg_dir msr ttbr0_el1, \tmp1 // set reserved TTBR0_EL1 isb - add \tmp1, \tmp1, #PAGE_SIZE + add \tmp1, \tmp1, #RESERVED_SWAPPER_OFFSET msr ttbr1_el1, \tmp1 // set reserved ASID isb .endm diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h index bf125c591116..ca31594d3d6c 100644 --- a/arch/arm64/include/asm/assembler.h +++ b/arch/arm64/include/asm/assembler.h @@ -676,6 +676,23 @@ USER(\label, ic ivau, \tmp2) // invalidate I line PoU .endm /* + * Set SCTLR_EL1 to the passed value, and invalidate the local icache + * in the process. This is called when setting the MMU on. + */ +.macro set_sctlr_el1, reg + msr sctlr_el1, \reg + isb + /* + * Invalidate the local I-cache so that any instructions fetched + * speculatively from the PoC are discarded, since they may have + * been dynamically patched at the PoU. + */ + ic iallu + dsb nsh + isb +.endm + +/* * Check whether to yield to another runnable task from kernel mode NEON code * (which runs with preemption disabled). * @@ -745,6 +762,22 @@ USER(\label, ic ivau, \tmp2) // invalidate I line PoU .Lyield_out_\@ : .endm + /* + * Check whether preempt-disabled code should yield as soon as it + * is able. This is the case if re-enabling preemption a single + * time results in a preempt count of zero, and the TIF_NEED_RESCHED + * flag is set. (Note that the latter is stored negated in the + * top word of the thread_info::preempt_count field) + */ + .macro cond_yield, lbl:req, tmp:req +#ifdef CONFIG_PREEMPTION + get_current_task \tmp + ldr \tmp, [\tmp, #TSK_TI_PREEMPT] + sub \tmp, \tmp, #PREEMPT_DISABLE_OFFSET + cbz \tmp, \lbl +#endif + .endm + /* * This macro emits a program property note section identifying * architecture features which require special handling, mainly for diff --git a/arch/arm64/include/asm/cache.h b/arch/arm64/include/asm/cache.h index 77cbbe3625f2..a074459f8f2f 100644 --- a/arch/arm64/include/asm/cache.h +++ b/arch/arm64/include/asm/cache.h @@ -6,7 +6,6 @@ #define __ASM_CACHE_H #include <asm/cputype.h> -#include <asm/mte-kasan.h> #define CTR_L1IP_SHIFT 14 #define CTR_L1IP_MASK 3 diff --git a/arch/arm64/include/asm/cacheflush.h b/arch/arm64/include/asm/cacheflush.h index 45217f21f1fe..52e5c1623224 100644 --- a/arch/arm64/include/asm/cacheflush.h +++ b/arch/arm64/include/asm/cacheflush.h @@ -30,11 +30,6 @@ * the implementation assumes non-aliasing VIPT D-cache and (aliasing) * VIPT I-cache. * - * flush_cache_mm(mm) - * - * Clean and invalidate all user space cache entries - * before a change of page tables. - * * flush_icache_range(start, end) * * Ensure coherency between the I-cache and the D-cache in the diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h index 9a555809b89c..61177bac49fa 100644 --- a/arch/arm64/include/asm/cpufeature.h +++ b/arch/arm64/include/asm/cpufeature.h @@ -63,6 +63,11 @@ struct arm64_ftr_bits { s64 safe_val; /* safe value for FTR_EXACT features */ }; +struct arm64_ftr_override { + u64 val; + u64 mask; +}; + /* * @arm64_ftr_reg - Feature register * @strict_mask Bits which should match across all CPUs for sanity. @@ -74,6 +79,7 @@ struct arm64_ftr_reg { u64 user_mask; u64 sys_val; u64 user_val; + struct arm64_ftr_override *override; const struct arm64_ftr_bits *ftr_bits; }; @@ -600,6 +606,7 @@ void __init setup_cpu_features(void); void check_local_cpu_capabilities(void); u64 read_sanitised_ftr_reg(u32 id); +u64 __read_sysreg_by_encoding(u32 sys_id); static inline bool cpu_supports_mixed_endian_el0(void) { @@ -811,6 +818,10 @@ static inline unsigned int get_vmid_bits(u64 mmfr1) return 8; } +extern struct arm64_ftr_override id_aa64mmfr1_override; +extern struct arm64_ftr_override id_aa64pfr1_override; +extern struct arm64_ftr_override id_aa64isar1_override; + u32 get_kvm_ipa_limit(void); void dump_cpu_features(void); diff --git a/arch/arm64/include/asm/el2_setup.h b/arch/arm64/include/asm/el2_setup.h index a7f5a1bbc8ac..d77d358f9395 100644 --- a/arch/arm64/include/asm/el2_setup.h +++ b/arch/arm64/include/asm/el2_setup.h @@ -32,46 +32,39 @@ * to transparently mess with the EL0 bits via CNTKCTL_EL1 access in * EL2. */ -.macro __init_el2_timers mode -.ifeqs "\mode", "nvhe" +.macro __init_el2_timers mrs x0, cnthctl_el2 orr x0, x0, #3 // Enable EL1 physical timers msr cnthctl_el2, x0 -.endif msr cntvoff_el2, xzr // Clear virtual offset .endm -.macro __init_el2_debug mode +.macro __init_el2_debug mrs x1, id_aa64dfr0_el1 sbfx x0, x1, #ID_AA64DFR0_PMUVER_SHIFT, #4 cmp x0, #1 - b.lt 1f // Skip if no PMU present + b.lt .Lskip_pmu_\@ // Skip if no PMU present mrs x0, pmcr_el0 // Disable debug access traps ubfx x0, x0, #11, #5 // to EL2 and allow access to -1: +.Lskip_pmu_\@: csel x2, xzr, x0, lt // all PMU counters from EL1 /* Statistical profiling */ ubfx x0, x1, #ID_AA64DFR0_PMSVER_SHIFT, #4 - cbz x0, 3f // Skip if SPE not present + cbz x0, .Lskip_spe_\@ // Skip if SPE not present -.ifeqs "\mode", "nvhe" mrs_s x0, SYS_PMBIDR_EL1 // If SPE available at EL2, and x0, x0, #(1 << SYS_PMBIDR_EL1_P_SHIFT) - cbnz x0, 2f // then permit sampling of physical + cbnz x0, .Lskip_spe_el2_\@ // then permit sampling of physical mov x0, #(1 << SYS_PMSCR_EL2_PCT_SHIFT | \ 1 << SYS_PMSCR_EL2_PA_SHIFT) msr_s SYS_PMSCR_EL2, x0 // addresses and physical counter -2: +.Lskip_spe_el2_\@: mov x0, #(MDCR_EL2_E2PB_MASK << MDCR_EL2_E2PB_SHIFT) orr x2, x2, x0 // If we don't have VHE, then // use EL1&0 translation. -.else - orr x2, x2, #MDCR_EL2_TPMS // For VHE, use EL2 translation - // and disable access from EL1 -.endif -3: +.Lskip_spe_\@: msr mdcr_el2, x2 // Configure debug traps .endm @@ -79,9 +72,9 @@ .macro __init_el2_lor mrs x1, id_aa64mmfr1_el1 ubfx x0, x1, #ID_AA64MMFR1_LOR_SHIFT, 4 - cbz x0, 1f + cbz x0, .Lskip_lor_\@ msr_s SYS_LORC_EL1, xzr -1: +.Lskip_lor_\@: .endm /* Stage-2 translation */ @@ -93,7 +86,7 @@ .macro __init_el2_gicv3 mrs x0, id_aa64pfr0_el1 ubfx x0, x0, #ID_AA64PFR0_GIC_SHIFT, #4 - cbz x0, 1f + cbz x0, .Lskip_gicv3_\@ mrs_s x0, SYS_ICC_SRE_EL2 orr x0, x0, #ICC_SRE_EL2_SRE // Set ICC_SRE_EL2.SRE==1 @@ -103,7 +96,7 @@ mrs_s x0, SYS_ICC_SRE_EL2 // Read SRE back, tbz x0, #0, 1f // and check that it sticks msr_s SYS_ICH_HCR_EL2, xzr // Reset ICC_HCR_EL2 to defaults -1: +.Lskip_gicv3_\@: .endm .macro __init_el2_hstr @@ -128,14 +121,14 @@ .macro __init_el2_nvhe_sve mrs x1, id_aa64pfr0_el1 ubfx x1, x1, #ID_AA64PFR0_SVE_SHIFT, #4 - cbz x1, 1f + cbz x1, .Lskip_sve_\@ bic x0, x0, #CPTR_EL2_TZ // Also disable SVE traps msr cptr_el2, x0 // Disable copro. traps to EL2 isb mov x1, #ZCR_ELx_LEN_MASK // SVE: Enable full vector msr_s SYS_ZCR_EL2, x1 // length for EL1. -1: +.Lskip_sve_\@: .endm .macro __init_el2_nvhe_prepare_eret @@ -145,37 +138,24 @@ /** * Initialize EL2 registers to sane values. This should be called early on all - * cores that were booted in EL2. + * cores that were booted in EL2. Note that everything gets initialised as + * if VHE was not evailable. The kernel context will be upgraded to VHE + * if possible later on in the boot process * * Regs: x0, x1 and x2 are clobbered. */ -.macro init_el2_state mode -.ifnes "\mode", "vhe" -.ifnes "\mode", "nvhe" -.error "Invalid 'mode' argument" -.endif -.endif - +.macro init_el2_state __init_el2_sctlr - __init_el2_timers \mode - __init_el2_debug \mode + __init_el2_timers + __init_el2_debug __init_el2_lor __init_el2_stage2 __init_el2_gicv3 __init_el2_hstr - - /* - * When VHE is not in use, early init of EL2 needs to be done here. - * When VHE _is_ in use, EL1 will not be used in the host and - * requires no configuration, and all non-hyp-specific EL2 setup - * will be done via the _EL1 system register aliases in __cpu_setup. - */ -.ifeqs "\mode", "nvhe" __init_el2_nvhe_idregs __init_el2_nvhe_cptr __init_el2_nvhe_sve __init_el2_nvhe_prepare_eret -.endif .endm #endif /* __ARM_KVM_INIT_H__ */ diff --git a/arch/arm64/include/asm/hyp_image.h b/arch/arm64/include/asm/hyp_image.h index daa1a1da539e..737ded6b6d0d 100644 --- a/arch/arm64/include/asm/hyp_image.h +++ b/arch/arm64/include/asm/hyp_image.h @@ -7,6 +7,9 @@ #ifndef __ARM64_HYP_IMAGE_H__ #define __ARM64_HYP_IMAGE_H__ +#define __HYP_CONCAT(a, b) a ## b +#define HYP_CONCAT(a, b) __HYP_CONCAT(a, b) + /* * KVM nVHE code has its own symbol namespace prefixed with __kvm_nvhe_, * to separate it from the kernel proper. @@ -21,9 +24,31 @@ */ #define HYP_SECTION_NAME(NAME) .hyp##NAME +/* Symbol defined at the beginning of each hyp section. */ +#define HYP_SECTION_SYMBOL_NAME(NAME) \ + HYP_CONCAT(__hyp_section_, HYP_SECTION_NAME(NAME)) + +/* + * Helper to generate linker script statements starting a hyp section. + * + * A symbol with a well-known name is defined at the first byte. This + * is used as a base for hyp relocations (see gen-hyprel.c). It must + * be defined inside the section so the linker of `vmlinux` cannot + * separate it from the section data. + */ +#define BEGIN_HYP_SECTION(NAME) \ + HYP_SECTION_NAME(NAME) : { \ + HYP_SECTION_SYMBOL_NAME(NAME) = .; + +/* Helper to generate linker script statements ending a hyp section. */ +#define END_HYP_SECTION \ + } + /* Defines an ELF hyp section from input section @NAME and its subsections. */ -#define HYP_SECTION(NAME) \ - HYP_SECTION_NAME(NAME) : { *(NAME NAME##.*) } +#define HYP_SECTION(NAME) \ + BEGIN_HYP_SECTION(NAME) \ + *(NAME NAME##.*) \ + END_HYP_SECTION /* * Defines a linker script alias of a kernel-proper symbol referenced by diff --git a/arch/arm64/include/asm/kasan.h b/arch/arm64/include/asm/kasan.h index 0aaf9044cd6a..12d5f47f7dbe 100644 --- a/arch/arm64/include/asm/kasan.h +++ b/arch/arm64/include/asm/kasan.h @@ -6,6 +6,7 @@ #include <linux/linkage.h> #include <asm/memory.h> +#include <asm/mte-kasan.h> #include <asm/pgtable-types.h> #define arch_kasan_set_tag(addr, tag) __tag_set(addr, tag) diff --git a/arch/arm64/include/asm/kexec.h b/arch/arm64/include/asm/kexec.h index d24b527e8c00..9befcd87e9a8 100644 --- a/arch/arm64/include/asm/kexec.h +++ b/arch/arm64/include/asm/kexec.h @@ -90,18 +90,19 @@ static inline void crash_prepare_suspend(void) {} static inline void crash_post_resume(void) {} #endif -#ifdef CONFIG_KEXEC_FILE #define ARCH_HAS_KIMAGE_ARCH struct kimage_arch { void *dtb; - unsigned long dtb_mem; + phys_addr_t dtb_mem; + phys_addr_t kern_reloc; /* Core ELF header buffer */ void *elf_headers; unsigned long elf_headers_mem; unsigned long elf_headers_sz; }; +#ifdef CONFIG_KEXEC_FILE extern const struct kexec_file_ops kexec_image_ops; struct kimage; diff --git a/arch/arm64/include/asm/kfence.h b/arch/arm64/include/asm/kfence.h new file mode 100644 index 000000000000..d061176d57ea --- /dev/null +++ b/arch/arm64/include/asm/kfence.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arm64 KFENCE support. + * + * Copyright (C) 2020, Google LLC. + */ + +#ifndef __ASM_KFENCE_H +#define __ASM_KFENCE_H + +#include <asm/cacheflush.h> + +static inline bool arch_kfence_init_pool(void) { return true; } + +static inline bool kfence_protect_page(unsigned long addr, bool protect) +{ + set_memory_valid(addr, 1, !protect); + + return true; +} + +#endif /* __ASM_KFENCE_H */ diff --git a/arch/arm64/include/asm/kvm_asm.h b/arch/arm64/include/asm/kvm_asm.h index 8a33d83ea843..a7ab84f781f7 100644 --- a/arch/arm64/include/asm/kvm_asm.h +++ b/arch/arm64/include/asm/kvm_asm.h @@ -47,10 +47,10 @@ #define __KVM_HOST_SMCCC_FUNC___kvm_flush_vm_context 2 #define __KVM_HOST_SMCCC_FUNC___kvm_tlb_flush_vmid_ipa 3 #define __KVM_HOST_SMCCC_FUNC___kvm_tlb_flush_vmid 4 -#define __KVM_HOST_SMCCC_FUNC___kvm_tlb_flush_local_vmid 5 +#define __KVM_HOST_SMCCC_FUNC___kvm_flush_cpu_context 5 #define __KVM_HOST_SMCCC_FUNC___kvm_timer_set_cntvoff 6 #define __KVM_HOST_SMCCC_FUNC___kvm_enable_ssbs 7 -#define __KVM_HOST_SMCCC_FUNC___vgic_v3_get_ich_vtr_el2 8 +#define __KVM_HOST_SMCCC_FUNC___vgic_v3_get_gic_config 8 #define __KVM_HOST_SMCCC_FUNC___vgic_v3_read_vmcr 9 #define __KVM_HOST_SMCCC_FUNC___vgic_v3_write_vmcr 10 #define __KVM_HOST_SMCCC_FUNC___vgic_v3_init_lrs 11 @@ -183,48 +183,22 @@ DECLARE_KVM_HYP_SYM(__bp_harden_hyp_vecs); #define __bp_harden_hyp_vecs CHOOSE_HYP_SYM(__bp_harden_hyp_vecs) extern void __kvm_flush_vm_context(void); +extern void __kvm_flush_cpu_context(struct kvm_s2_mmu *mmu); extern void __kvm_tlb_flush_vmid_ipa(struct kvm_s2_mmu *mmu, phys_addr_t ipa, int level); extern void __kvm_tlb_flush_vmid(struct kvm_s2_mmu *mmu); -extern void __kvm_tlb_flush_local_vmid(struct kvm_s2_mmu *mmu); extern void __kvm_timer_set_cntvoff(u64 cntvoff); extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu); -extern u64 __vgic_v3_get_ich_vtr_el2(void); +extern u64 __vgic_v3_get_gic_config(void); extern u64 __vgic_v3_read_vmcr(void); extern void __vgic_v3_write_vmcr(u32 vmcr); extern void __vgic_v3_init_lrs(void); extern u32 __kvm_get_mdcr_el2(void); -#if defined(GCC_VERSION) && GCC_VERSION < 50000 -#define SYM_CONSTRAINT "i" -#else -#define SYM_CONSTRAINT "S" -#endif - -/* - * Obtain the PC-relative address of a kernel symbol - * s: symbol - * - * The goal of this macro is to return a symbol's address based on a - * PC-relative computation, as opposed to a loading the VA from a - * constant pool or something similar. This works well for HYP, as an - * absolute VA is guaranteed to be wrong. Only use this if trying to - * obtain the address of a symbol (i.e. not something you obtained by - * following a pointer). - */ -#define hyp_symbol_addr(s) \ - ({ \ - typeof(s) *addr; \ - asm("adrp %0, %1\n" \ - "add %0, %0, :lo12:%1\n" \ - : "=r" (addr) : SYM_CONSTRAINT (&s)); \ - addr; \ - }) - #define __KVM_EXTABLE(from, to) \ " .pushsection __kvm_ex_table, \"a\"\n" \ " .align 3\n" \ diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index 8fcfab0c2567..3d10e6527f7d 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -30,7 +30,6 @@ #define __KVM_HAVE_ARCH_INTC_INITIALIZED -#define KVM_USER_MEM_SLOTS 512 #define KVM_HALT_POLL_NS_DEFAULT 500000 #include <kvm/arm_vgic.h> @@ -771,4 +770,6 @@ bool kvm_arm_vcpu_is_finalized(struct kvm_vcpu *vcpu); #define kvm_vcpu_has_pmu(vcpu) \ (test_bit(KVM_ARM_VCPU_PMU_V3, (vcpu)->arch.features)) +int kvm_trng_call(struct kvm_vcpu *vcpu); + #endif /* __ARM64_KVM_HOST_H__ */ diff --git a/arch/arm64/include/asm/kvm_hyp.h b/arch/arm64/include/asm/kvm_hyp.h index c0450828378b..32ae676236b6 100644 --- a/arch/arm64/include/asm/kvm_hyp.h +++ b/arch/arm64/include/asm/kvm_hyp.h @@ -83,6 +83,11 @@ void sysreg_restore_guest_state_vhe(struct kvm_cpu_context *ctxt); void __debug_switch_to_guest(struct kvm_vcpu *vcpu); void __debug_switch_to_host(struct kvm_vcpu *vcpu); +#ifdef __KVM_NVHE_HYPERVISOR__ +void __debug_save_host_buffers_nvhe(struct kvm_vcpu *vcpu); +void __debug_restore_host_buffers_nvhe(struct kvm_vcpu *vcpu); +#endif + void __fpsimd_save_state(struct user_fpsimd_state *fp_regs); void __fpsimd_restore_state(struct user_fpsimd_state *fp_regs); @@ -97,7 +102,8 @@ bool kvm_host_psci_handler(struct kvm_cpu_context *host_ctxt); void __noreturn hyp_panic(void); #ifdef __KVM_NVHE_HYPERVISOR__ -void __noreturn __hyp_do_panic(bool restore_host, u64 spsr, u64 elr, u64 par); +void __noreturn __hyp_do_panic(struct kvm_cpu_context *host_ctxt, u64 spsr, + u64 elr, u64 par); #endif #endif /* __ARM64_KVM_HYP_H__ */ diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h index e52d82aeadca..90873851f677 100644 --- a/arch/arm64/include/asm/kvm_mmu.h +++ b/arch/arm64/include/asm/kvm_mmu.h @@ -73,49 +73,39 @@ alternative_cb_end .endm /* - * Convert a kernel image address to a PA - * reg: kernel address to be converted in place + * Convert a hypervisor VA to a PA + * reg: hypervisor address to be converted in place * tmp: temporary register - * - * The actual code generation takes place in kvm_get_kimage_voffset, and - * the instructions below are only there to reserve the space and - * perform the register allocation (kvm_get_kimage_voffset uses the - * specific registers encoded in the instructions). */ -.macro kimg_pa reg, tmp -alternative_cb kvm_get_kimage_voffset - movz \tmp, #0 - movk \tmp, #0, lsl #16 - movk \tmp, #0, lsl #32 - movk \tmp, #0, lsl #48 -alternative_cb_end - - /* reg = __pa(reg) */ - sub \reg, \reg, \tmp +.macro hyp_pa reg, tmp + ldr_l \tmp, hyp_physvirt_offset + add \reg, \reg, \tmp .endm /* - * Convert a kernel image address to a hyp VA - * reg: kernel address to be converted in place + * Convert a hypervisor VA to a kernel image address + * reg: hypervisor address to be converted in place * tmp: temporary register * * The actual code generation takes place in kvm_get_kimage_voffset, and * the instructions below are only there to reserve the space and - * perform the register allocation (kvm_update_kimg_phys_offset uses the + * perform the register allocation (kvm_get_kimage_voffset uses the * specific registers encoded in the instructions). */ -.macro kimg_hyp_va reg, tmp -alternative_cb kvm_update_kimg_phys_offset +.macro hyp_kimg_va reg, tmp + /* Convert hyp VA -> PA. */ + hyp_pa \reg, \tmp + + /* Load kimage_voffset. */ +alternative_cb kvm_get_kimage_voffset movz \tmp, #0 movk \tmp, #0, lsl #16 movk \tmp, #0, lsl #32 movk \tmp, #0, lsl #48 alternative_cb_end - sub \reg, \reg, \tmp - mov_q \tmp, PAGE_OFFSET - orr \reg, \reg, \tmp - kern_hyp_va \reg + /* Convert PA -> kimg VA. */ + add \reg, \reg, \tmp .endm #else @@ -129,6 +119,7 @@ alternative_cb_end void kvm_update_va_mask(struct alt_instr *alt, __le32 *origptr, __le32 *updptr, int nr_inst); void kvm_compute_layout(void); +void kvm_apply_hyp_relocations(void); static __always_inline unsigned long __kern_hyp_va(unsigned long v) { @@ -144,24 +135,6 @@ static __always_inline unsigned long __kern_hyp_va(unsigned long v) #define kern_hyp_va(v) ((typeof(v))(__kern_hyp_va((unsigned long)(v)))) -static __always_inline unsigned long __kimg_hyp_va(unsigned long v) -{ - unsigned long offset; - - asm volatile(ALTERNATIVE_CB("movz %0, #0\n" - "movk %0, #0, lsl #16\n" - "movk %0, #0, lsl #32\n" - "movk %0, #0, lsl #48\n", - kvm_update_kimg_phys_offset) - : "=r" (offset)); - - return __kern_hyp_va((v - offset) | PAGE_OFFSET); -} - -#define kimg_fn_hyp_va(v) ((typeof(*v))(__kimg_hyp_va((unsigned long)(v)))) - -#define kimg_fn_ptr(x) (typeof(x) **)(x) - /* * We currently support using a VM-specified IPA size. For backward * compatibility, the default IPA size is fixed to 40bits. diff --git a/arch/arm64/include/asm/kvm_pgtable.h b/arch/arm64/include/asm/kvm_pgtable.h index 52ab38db04c7..8886d43cfb11 100644 --- a/arch/arm64/include/asm/kvm_pgtable.h +++ b/arch/arm64/include/asm/kvm_pgtable.h @@ -157,6 +157,11 @@ void kvm_pgtable_stage2_destroy(struct kvm_pgtable *pgt); * If device attributes are not explicitly requested in @prot, then the * mapping will be normal, cacheable. * + * Note that the update of a valid leaf PTE in this function will be aborted, + * if it's trying to recreate the exact same mapping or only change the access + * permissions. Instead, the vCPU will exit one more time from guest if still + * needed and then go through the path of relaxing permissions. + * * Note that this function will both coalesce existing table entries and split * existing block mappings, relying on page-faults to fault back areas outside * of the new mapping lazily. diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h index ff4732785c32..0aabc3be9a75 100644 --- a/arch/arm64/include/asm/memory.h +++ b/arch/arm64/include/asm/memory.h @@ -159,6 +159,18 @@ #define IOREMAP_MAX_ORDER (PMD_SHIFT) #endif +/* + * Open-coded (swapper_pg_dir - reserved_pg_dir) as this cannot be calculated + * until link time. + */ +#define RESERVED_SWAPPER_OFFSET (PAGE_SIZE) + +/* + * Open-coded (swapper_pg_dir - tramp_pg_dir) as this cannot be calculated + * until link time. + */ +#define TRAMP_SWAPPER_OFFSET (2 * PAGE_SIZE) + #ifndef __ASSEMBLY__ #include <linux/bitops.h> @@ -232,6 +244,7 @@ static inline const void *__tag_set(const void *addr, u8 tag) #ifdef CONFIG_KASAN_HW_TAGS #define arch_enable_tagging() mte_enable_kernel() +#define arch_set_tagging_report_once(state) mte_set_report_once(state) #define arch_init_tags(max_tag) mte_init_tags(max_tag) #define arch_get_random_tag() mte_get_random_tag() #define arch_get_mem_tag(addr) mte_get_mem_tag(addr) @@ -315,6 +328,11 @@ static inline void *phys_to_virt(phys_addr_t x) #define ARCH_PFN_OFFSET ((unsigned long)PHYS_PFN_OFFSET) #if !defined(CONFIG_SPARSEMEM_VMEMMAP) || defined(CONFIG_DEBUG_VIRTUAL) +#define page_to_virt(x) ({ \ + __typeof__(x) __page = x; \ + void *__addr = __va(page_to_phys(__page)); \ + (void *)__tag_set((const void *)__addr, page_kasan_tag(__page));\ +}) #define virt_to_page(x) pfn_to_page(virt_to_pfn(x)) #else #define page_to_virt(x) ({ \ diff --git a/arch/arm64/include/asm/mmu_context.h b/arch/arm64/include/asm/mmu_context.h index 0b3079fd28eb..bd02e99b1a4c 100644 --- a/arch/arm64/include/asm/mmu_context.h +++ b/arch/arm64/include/asm/mmu_context.h @@ -63,34 +63,16 @@ static inline void cpu_switch_mm(pgd_t *pgd, struct mm_struct *mm) extern u64 idmap_t0sz; extern u64 idmap_ptrs_per_pgd; -static inline bool __cpu_uses_extended_idmap(void) -{ - if (IS_ENABLED(CONFIG_ARM64_VA_BITS_52)) - return false; - - return unlikely(idmap_t0sz != TCR_T0SZ(VA_BITS)); -} - -/* - * True if the extended ID map requires an extra level of translation table - * to be configured. - */ -static inline bool __cpu_uses_extended_idmap_level(void) -{ - return ARM64_HW_PGTABLE_LEVELS(64 - idmap_t0sz) > CONFIG_PGTABLE_LEVELS; -} - /* - * Set TCR.T0SZ to its default value (based on VA_BITS) + * Ensure TCR.T0SZ is set to the provided value. */ static inline void __cpu_set_tcr_t0sz(unsigned long t0sz) { - unsigned long tcr; + unsigned long tcr = read_sysreg(tcr_el1); - if (!__cpu_uses_extended_idmap()) + if ((tcr & TCR_T0SZ_MASK) >> TCR_T0SZ_OFFSET == t0sz) return; - tcr = read_sysreg(tcr_el1); tcr &= ~TCR_T0SZ_MASK; tcr |= t0sz << TCR_T0SZ_OFFSET; write_sysreg(tcr, tcr_el1); diff --git a/arch/arm64/include/asm/module.lds.h b/arch/arm64/include/asm/module.lds.h index 691f15af788e..810045628c66 100644 --- a/arch/arm64/include/asm/module.lds.h +++ b/arch/arm64/include/asm/module.lds.h @@ -1,7 +1,7 @@ #ifdef CONFIG_ARM64_MODULE_PLTS SECTIONS { - .plt (NOLOAD) : { BYTE(0) } - .init.plt (NOLOAD) : { BYTE(0) } - .text.ftrace_trampoline (NOLOAD) : { BYTE(0) } + .plt 0 (NOLOAD) : { BYTE(0) } + .init.plt 0 (NOLOAD) : { BYTE(0) } + .text.ftrace_trampoline 0 (NOLOAD) : { BYTE(0) } } #endif diff --git a/arch/arm64/include/asm/mte-def.h b/arch/arm64/include/asm/mte-def.h index 2d73a1612f09..cf241b0f0a42 100644 --- a/arch/arm64/include/asm/mte-def.h +++ b/arch/arm64/include/asm/mte-def.h @@ -11,4 +11,6 @@ #define MTE_TAG_SIZE 4 #define MTE_TAG_MASK GENMASK((MTE_TAG_SHIFT + (MTE_TAG_SIZE - 1)), MTE_TAG_SHIFT) +#define __MTE_PREAMBLE ARM64_ASM_PREAMBLE ".arch_extension memtag\n" + #endif /* __ASM_MTE_DEF_H */ diff --git a/arch/arm64/include/asm/mte-kasan.h b/arch/arm64/include/asm/mte-kasan.h index 26349a4b5e2e..7ab500e2ad17 100644 --- a/arch/arm64/include/asm/mte-kasan.h +++ b/arch/arm64/include/asm/mte-kasan.h @@ -11,11 +11,14 @@ #include <linux/types.h> +#ifdef CONFIG_ARM64_MTE + /* - * The functions below are meant to be used only for the - * KASAN_HW_TAGS interface defined in asm/memory.h. + * These functions are meant to be only used from KASAN runtime through + * the arch_*() interface defined in asm/memory.h. + * These functions don't include system_supports_mte() checks, + * as KASAN only calls them when MTE is supported and enabled. */ -#ifdef CONFIG_ARM64_MTE static inline u8 mte_get_ptr_tag(void *ptr) { @@ -25,13 +28,61 @@ static inline u8 mte_get_ptr_tag(void *ptr) return tag; } -u8 mte_get_mem_tag(void *addr); -u8 mte_get_random_tag(void); -void *mte_set_mem_tag_range(void *addr, size_t size, u8 tag); +/* Get allocation tag for the address. */ +static inline u8 mte_get_mem_tag(void *addr) +{ + asm(__MTE_PREAMBLE "ldg %0, [%0]" + : "+r" (addr)); + + return mte_get_ptr_tag(addr); +} + +/* Generate a random tag. */ +static inline u8 mte_get_random_tag(void) +{ + void *addr; + + asm(__MTE_PREAMBLE "irg %0, %0" + : "=r" (addr)); + + return mte_get_ptr_tag(addr); +} + +/* + * Assign allocation tags for a region of memory based on the pointer tag. + * Note: The address must be non-NULL and MTE_GRANULE_SIZE aligned and + * size must be non-zero and MTE_GRANULE_SIZE aligned. + */ +static inline void mte_set_mem_tag_range(void *addr, size_t size, u8 tag) +{ + u64 curr, end; + + if (!size) + return; + + curr = (u64)__tag_set(addr, tag); + end = curr + size; + + do { + /* + * 'asm volatile' is required to prevent the compiler to move + * the statement outside of the loop. + */ + asm volatile(__MTE_PREAMBLE "stg %0, [%0]" + : + : "r" (curr) + : "memory"); + + curr += MTE_GRANULE_SIZE; + } while (curr != end); +} void mte_enable_kernel(void); void mte_init_tags(u64 max_tag); +void mte_set_report_once(bool state); +bool mte_report_once(void); + #else /* CONFIG_ARM64_MTE */ static inline u8 mte_get_ptr_tag(void *ptr) @@ -43,13 +94,14 @@ static inline u8 mte_get_mem_tag(void *addr) { return 0xFF; } + static inline u8 mte_get_random_tag(void) { return 0xFF; } -static inline void *mte_set_mem_tag_range(void *addr, size_t size, u8 tag) + +static inline void mte_set_mem_tag_range(void *addr, size_t size, u8 tag) { - return addr; } static inline void mte_enable_kernel(void) @@ -60,6 +112,15 @@ static inline void mte_init_tags(u64 max_tag) { } +static inline void mte_set_report_once(bool state) +{ +} + +static inline bool mte_report_once(void) +{ + return false; +} + #endif /* CONFIG_ARM64_MTE */ #endif /* __ASSEMBLY__ */ diff --git a/arch/arm64/include/asm/mte.h b/arch/arm64/include/asm/mte.h index d02aff9f493d..9b557a457f24 100644 --- a/arch/arm64/include/asm/mte.h +++ b/arch/arm64/include/asm/mte.h @@ -8,8 +8,6 @@ #include <asm/compiler.h> #include <asm/mte-def.h> -#define __MTE_PREAMBLE ARM64_ASM_PREAMBLE ".arch_extension memtag\n" - #ifndef __ASSEMBLY__ #include <linux/bitfield.h> diff --git a/arch/arm64/include/asm/numa.h b/arch/arm64/include/asm/numa.h index dd870390d639..8c8cf4297cc3 100644 --- a/arch/arm64/include/asm/numa.h +++ b/arch/arm64/include/asm/numa.h @@ -3,52 +3,6 @@ #define __ASM_NUMA_H #include <asm/topology.h> - -#ifdef CONFIG_NUMA - -#define NR_NODE_MEMBLKS (MAX_NUMNODES * 2) - -int __node_distance(int from, int to); -#define node_distance(a, b) __node_distance(a, b) - -extern nodemask_t numa_nodes_parsed __initdata; - -extern bool numa_off; - -/* Mappings between node number and cpus on that node. */ -extern cpumask_var_t node_to_cpumask_map[MAX_NUMNODES]; -void numa_clear_node(unsigned int cpu); - -#ifdef CONFIG_DEBUG_PER_CPU_MAPS -const struct cpumask *cpumask_of_node(int node); -#else -/* Returns a pointer to the cpumask of CPUs on Node 'node'. */ -static inline const struct cpumask *cpumask_of_node(int node) -{ - if (node == NUMA_NO_NODE) - return cpu_all_mask; - - return node_to_cpumask_map[node]; -} -#endif - -void __init arm64_numa_init(void); -int __init numa_add_memblk(int nodeid, u64 start, u64 end); -void __init numa_set_distance(int from, int to, int distance); -void __init numa_free_distance(void); -void __init early_map_cpu_to_node(unsigned int cpu, int nid); -void numa_store_cpu_info(unsigned int cpu); -void numa_add_cpu(unsigned int cpu); -void numa_remove_cpu(unsigned int cpu); - -#else /* CONFIG_NUMA */ - -static inline void numa_store_cpu_info(unsigned int cpu) { } -static inline void numa_add_cpu(unsigned int cpu) { } -static inline void numa_remove_cpu(unsigned int cpu) { } -static inline void arm64_numa_init(void) { } -static inline void early_map_cpu_to_node(unsigned int cpu, int nid) { } - -#endif /* CONFIG_NUMA */ +#include <asm-generic/numa.h> #endif /* __ASM_NUMA_H */ diff --git a/arch/arm64/include/asm/pgtable-prot.h b/arch/arm64/include/asm/pgtable-prot.h index 046be789fbb4..9a65fb528110 100644 --- a/arch/arm64/include/asm/pgtable-prot.h +++ b/arch/arm64/include/asm/pgtable-prot.h @@ -66,7 +66,6 @@ extern bool arm64_use_ng_mappings; #define _PAGE_DEFAULT (_PROT_DEFAULT | PTE_ATTRINDX(MT_NORMAL)) #define PAGE_KERNEL __pgprot(PROT_NORMAL) -#define PAGE_KERNEL_TAGGED __pgprot(PROT_NORMAL_TAGGED) #define PAGE_KERNEL_RO __pgprot((PROT_NORMAL & ~PTE_WRITE) | PTE_RDONLY) #define PAGE_KERNEL_ROX __pgprot((PROT_NORMAL & ~(PTE_WRITE | PTE_PXN)) | PTE_RDONLY) #define PAGE_KERNEL_EXEC __pgprot(PROT_NORMAL & ~PTE_PXN) diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index 501562793ce2..47027796c2f9 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -486,6 +486,9 @@ static inline pmd_t pmd_mkdevmap(pmd_t pmd) __pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_NORMAL_NC) | PTE_PXN | PTE_UXN) #define pgprot_device(prot) \ __pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_DEVICE_nGnRE) | PTE_PXN | PTE_UXN) +#define pgprot_tagged(prot) \ + __pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_NORMAL_TAGGED)) +#define pgprot_mhp pgprot_tagged /* * DMA allocations for non-coherent devices use what the Arm architecture calls * "Normal non-cacheable" memory, which permits speculation, unaligned accesses @@ -980,7 +983,17 @@ static inline bool arch_faults_on_old_pte(void) return !cpu_has_hw_af(); } -#define arch_faults_on_old_pte arch_faults_on_old_pte +#define arch_faults_on_old_pte arch_faults_on_old_pte + +/* + * Experimentally, it's cheap to set the access flag in hardware and we + * benefit from prefaulting mappings as 'old' to start with. + */ +static inline bool arch_wants_old_prefaulted_pte(void) +{ + return !arch_faults_on_old_pte(); +} +#define arch_wants_old_prefaulted_pte arch_wants_old_prefaulted_pte #endif /* !__ASSEMBLY__ */ diff --git a/arch/arm64/include/asm/pointer_auth.h b/arch/arm64/include/asm/pointer_auth.h index c6b4f0603024..b112a11e9302 100644 --- a/arch/arm64/include/asm/pointer_auth.h +++ b/arch/arm64/include/asm/pointer_auth.h @@ -76,6 +76,15 @@ static inline unsigned long ptrauth_strip_insn_pac(unsigned long ptr) return ptrauth_clear_pac(ptr); } +static __always_inline void ptrauth_enable(void) +{ + if (!system_supports_address_auth()) + return; + sysreg_clear_set(sctlr_el1, 0, (SCTLR_ELx_ENIA | SCTLR_ELx_ENIB | + SCTLR_ELx_ENDA | SCTLR_ELx_ENDB)); + isb(); +} + #define ptrauth_thread_init_user(tsk) \ ptrauth_keys_init_user(&(tsk)->thread.keys_user) #define ptrauth_thread_init_kernel(tsk) \ @@ -84,6 +93,7 @@ static inline unsigned long ptrauth_strip_insn_pac(unsigned long ptr) ptrauth_keys_switch_kernel(&(tsk)->thread.keys_kernel) #else /* CONFIG_ARM64_PTR_AUTH */ +#define ptrauth_enable() #define ptrauth_prctl_reset_keys(tsk, arg) (-EINVAL) #define ptrauth_strip_insn_pac(lr) (lr) #define ptrauth_thread_init_user(tsk) diff --git a/arch/arm64/include/asm/sections.h b/arch/arm64/include/asm/sections.h index 8ff579361731..2f36b16a5b5d 100644 --- a/arch/arm64/include/asm/sections.h +++ b/arch/arm64/include/asm/sections.h @@ -11,7 +11,8 @@ extern char __alt_instructions[], __alt_instructions_end[]; extern char __hibernate_exit_text_start[], __hibernate_exit_text_end[]; extern char __hyp_idmap_text_start[], __hyp_idmap_text_end[]; extern char __hyp_text_start[], __hyp_text_end[]; -extern char __hyp_data_ro_after_init_start[], __hyp_data_ro_after_init_end[]; +extern char __hyp_rodata_start[], __hyp_rodata_end[]; +extern char __hyp_reloc_begin[], __hyp_reloc_end[]; extern char __idmap_text_start[], __idmap_text_end[]; extern char __initdata_begin[], __initdata_end[]; extern char __inittext_begin[], __inittext_end[]; diff --git a/arch/arm64/include/asm/setup.h b/arch/arm64/include/asm/setup.h new file mode 100644 index 000000000000..d3320618ed14 --- /dev/null +++ b/arch/arm64/include/asm/setup.h @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0 + +#ifndef __ARM64_ASM_SETUP_H +#define __ARM64_ASM_SETUP_H + +#include <uapi/asm/setup.h> + +void *get_early_fdt_ptr(void); +void early_fdt_map(u64 dt_phys); + +#endif diff --git a/arch/arm64/include/asm/sparsemem.h b/arch/arm64/include/asm/sparsemem.h index 1f43fcc79738..eb4a75d720ed 100644 --- a/arch/arm64/include/asm/sparsemem.h +++ b/arch/arm64/include/asm/sparsemem.h @@ -7,7 +7,26 @@ #ifdef CONFIG_SPARSEMEM #define MAX_PHYSMEM_BITS CONFIG_ARM64_PA_BITS -#define SECTION_SIZE_BITS 30 -#endif + +/* + * Section size must be at least 512MB for 64K base + * page size config. Otherwise it will be less than + * (MAX_ORDER - 1) and the build process will fail. + */ +#ifdef CONFIG_ARM64_64K_PAGES +#define SECTION_SIZE_BITS 29 + +#else + +/* + * Section size must be at least 128MB for 4K base + * page size config. Otherwise PMD based huge page + * entries could not be created for vmemmap mappings. + * 16K follows 4K for simplicity. + */ +#define SECTION_SIZE_BITS 27 +#endif /* CONFIG_ARM64_64K_PAGES */ + +#endif /* CONFIG_SPARSEMEM*/ #endif diff --git a/arch/arm64/include/asm/spinlock.h b/arch/arm64/include/asm/spinlock.h index 9083d6992603..0525c0b089ed 100644 --- a/arch/arm64/include/asm/spinlock.h +++ b/arch/arm64/include/asm/spinlock.h @@ -5,8 +5,8 @@ #ifndef __ASM_SPINLOCK_H #define __ASM_SPINLOCK_H -#include <asm/qrwlock.h> #include <asm/qspinlock.h> +#include <asm/qrwlock.h> /* See include/linux/spinlock.h */ #define smp_mb__after_spinlock() smp_mb() diff --git a/arch/arm64/include/asm/stackprotector.h b/arch/arm64/include/asm/stackprotector.h index 7263e0bac680..33f1bb453150 100644 --- a/arch/arm64/include/asm/stackprotector.h +++ b/arch/arm64/include/asm/stackprotector.h @@ -41,6 +41,7 @@ static __always_inline void boot_init_stack_canary(void) #endif ptrauth_thread_init_kernel(current); ptrauth_thread_switch_kernel(current); + ptrauth_enable(); } #endif /* _ASM_STACKPROTECTOR_H */ diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h index 8b5e7e5c3cc8..d4a5fca984c3 100644 --- a/arch/arm64/include/asm/sysreg.h +++ b/arch/arm64/include/asm/sysreg.h @@ -191,6 +191,7 @@ #define SYS_GCR_EL1 sys_reg(3, 0, 1, 0, 6) #define SYS_ZCR_EL1 sys_reg(3, 0, 1, 2, 0) +#define SYS_TRFCR_EL1 sys_reg(3, 0, 1, 2, 1) #define SYS_TTBR0_EL1 sys_reg(3, 0, 2, 0, 0) #define SYS_TTBR1_EL1 sys_reg(3, 0, 2, 0, 1) @@ -291,7 +292,11 @@ #define SYS_PMSFCR_EL1_ST_SHIFT 18 #define SYS_PMSEVFR_EL1 sys_reg(3, 0, 9, 9, 5) -#define SYS_PMSEVFR_EL1_RES0 0x0000ffff00ff0f55UL +#define SYS_PMSEVFR_EL1_RES0_8_2 \ + (GENMASK_ULL(47, 32) | GENMASK_ULL(23, 16) | GENMASK_ULL(11, 8) |\ + BIT_ULL(6) | BIT_ULL(4) | BIT_ULL(2) | BIT_ULL(0)) +#define SYS_PMSEVFR_EL1_RES0_8_3 \ + (SYS_PMSEVFR_EL1_RES0_8_2 & ~(BIT_ULL(18) | BIT_ULL(17) | BIT_ULL(11))) #define SYS_PMSLATFR_EL1 sys_reg(3, 0, 9, 9, 6) #define SYS_PMSLATFR_EL1_MINLAT_SHIFT 0 @@ -471,6 +476,7 @@ #define SYS_SCTLR_EL2 sys_reg(3, 4, 1, 0, 0) #define SYS_ZCR_EL2 sys_reg(3, 4, 1, 2, 0) +#define SYS_TRFCR_EL2 sys_reg(3, 4, 1, 2, 1) #define SYS_DACR32_EL2 sys_reg(3, 4, 3, 0, 0) #define SYS_SPSR_EL2 sys_reg(3, 4, 4, 0, 0) #define SYS_ELR_EL2 sys_reg(3, 4, 4, 0, 1) @@ -790,6 +796,11 @@ #define ID_AA64MMFR0_PARANGE_48 0x5 #define ID_AA64MMFR0_PARANGE_52 0x6 +#define ID_AA64MMFR0_TGRAN_2_SUPPORTED_DEFAULT 0x0 +#define ID_AA64MMFR0_TGRAN_2_SUPPORTED_NONE 0x1 +#define ID_AA64MMFR0_TGRAN_2_SUPPORTED_MIN 0x2 +#define ID_AA64MMFR0_TGRAN_2_SUPPORTED_MAX 0x7 + #ifdef CONFIG_ARM64_PA_BITS_52 #define ID_AA64MMFR0_PARANGE_MAX ID_AA64MMFR0_PARANGE_52 #else @@ -829,6 +840,7 @@ #define ID_AA64MMFR2_CNP_SHIFT 0 /* id_aa64dfr0 */ +#define ID_AA64DFR0_TRACE_FILT_SHIFT 40 #define ID_AA64DFR0_DOUBLELOCK_SHIFT 36 #define ID_AA64DFR0_PMSVER_SHIFT 32 #define ID_AA64DFR0_CTX_CMPS_SHIFT 28 @@ -844,9 +856,15 @@ #define ID_AA64DFR0_PMUVER_8_5 0x6 #define ID_AA64DFR0_PMUVER_IMP_DEF 0xf +#define ID_AA64DFR0_PMSVER_8_2 0x1 +#define ID_AA64DFR0_PMSVER_8_3 0x2 + #define ID_DFR0_PERFMON_SHIFT 24 +#define ID_DFR0_PERFMON_8_0 0x3 #define ID_DFR0_PERFMON_8_1 0x4 +#define ID_DFR0_PERFMON_8_4 0x5 +#define ID_DFR0_PERFMON_8_5 0x6 #define ID_ISAR4_SWP_FRAC_SHIFT 28 #define ID_ISAR4_PSR_M_SHIFT 24 @@ -948,14 +966,17 @@ #define ID_PFR1_PROGMOD_SHIFT 0 #if defined(CONFIG_ARM64_4K_PAGES) -#define ID_AA64MMFR0_TGRAN_SHIFT ID_AA64MMFR0_TGRAN4_SHIFT -#define ID_AA64MMFR0_TGRAN_SUPPORTED ID_AA64MMFR0_TGRAN4_SUPPORTED +#define ID_AA64MMFR0_TGRAN_SHIFT ID_AA64MMFR0_TGRAN4_SHIFT +#define ID_AA64MMFR0_TGRAN_SUPPORTED_MIN ID_AA64MMFR0_TGRAN4_SUPPORTED +#define ID_AA64MMFR0_TGRAN_SUPPORTED_MAX 0x7 #elif defined(CONFIG_ARM64_16K_PAGES) -#define ID_AA64MMFR0_TGRAN_SHIFT ID_AA64MMFR0_TGRAN16_SHIFT -#define ID_AA64MMFR0_TGRAN_SUPPORTED ID_AA64MMFR0_TGRAN16_SUPPORTED +#define ID_AA64MMFR0_TGRAN_SHIFT ID_AA64MMFR0_TGRAN16_SHIFT +#define ID_AA64MMFR0_TGRAN_SUPPORTED_MIN ID_AA64MMFR0_TGRAN16_SUPPORTED +#define ID_AA64MMFR0_TGRAN_SUPPORTED_MAX 0xF #elif defined(CONFIG_ARM64_64K_PAGES) -#define ID_AA64MMFR0_TGRAN_SHIFT ID_AA64MMFR0_TGRAN64_SHIFT -#define ID_AA64MMFR0_TGRAN_SUPPORTED ID_AA64MMFR0_TGRAN64_SUPPORTED +#define ID_AA64MMFR0_TGRAN_SHIFT ID_AA64MMFR0_TGRAN64_SHIFT +#define ID_AA64MMFR0_TGRAN_SUPPORTED_MIN ID_AA64MMFR0_TGRAN64_SUPPORTED +#define ID_AA64MMFR0_TGRAN_SUPPORTED_MAX 0x7 #endif #define MVFR2_FPMISC_SHIFT 4 @@ -1003,6 +1024,14 @@ /* Safe value for MPIDR_EL1: Bit31:RES1, Bit30:U:0, Bit24:MT:0 */ #define SYS_MPIDR_SAFE_VAL (BIT(31)) +#define TRFCR_ELx_TS_SHIFT 5 +#define TRFCR_ELx_TS_VIRTUAL ((0x1UL) << TRFCR_ELx_TS_SHIFT) +#define TRFCR_ELx_TS_GUEST_PHYSICAL ((0x2UL) << TRFCR_ELx_TS_SHIFT) +#define TRFCR_ELx_TS_PHYSICAL ((0x3UL) << TRFCR_ELx_TS_SHIFT) +#define TRFCR_EL2_CX BIT(3) +#define TRFCR_ELx_ExTRE BIT(1) +#define TRFCR_ELx_E0TRE BIT(0) + #ifdef __ASSEMBLY__ .irp num,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30 diff --git a/arch/arm64/include/asm/trans_pgd.h b/arch/arm64/include/asm/trans_pgd.h new file mode 100644 index 000000000000..5d08e5adf3d5 --- /dev/null +++ b/arch/arm64/include/asm/trans_pgd.h @@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* + * Copyright (c) 2020, Microsoft Corporation. + * Pavel Tatashin <pasha.tatashin@soleen.com> + */ + +#ifndef _ASM_TRANS_TABLE_H +#define _ASM_TRANS_TABLE_H + +#include <linux/bits.h> +#include <linux/types.h> +#include <asm/pgtable-types.h> + +/* + * trans_alloc_page + * - Allocator that should return exactly one zeroed page, if this + * allocator fails, trans_pgd_create_copy() and trans_pgd_map_page() + * return -ENOMEM error. + * + * trans_alloc_arg + * - Passed to trans_alloc_page as an argument + */ + +struct trans_pgd_info { + void * (*trans_alloc_page)(void *arg); + void *trans_alloc_arg; +}; + +int trans_pgd_create_copy(struct trans_pgd_info *info, pgd_t **trans_pgd, + unsigned long start, unsigned long end); + +int trans_pgd_map_page(struct trans_pgd_info *info, pgd_t *trans_pgd, + void *page, unsigned long dst_addr, pgprot_t pgprot); + +int trans_pgd_idmap_page(struct trans_pgd_info *info, phys_addr_t *trans_ttbr0, + unsigned long *t0sz, void *page); + +#endif /* _ASM_TRANS_TABLE_H */ diff --git a/arch/arm64/include/asm/uaccess.h b/arch/arm64/include/asm/uaccess.h index f0fe0cc6abe0..0deb88467111 100644 --- a/arch/arm64/include/asm/uaccess.h +++ b/arch/arm64/include/asm/uaccess.h @@ -87,7 +87,7 @@ static inline void __uaccess_ttbr0_disable(void) ttbr = read_sysreg(ttbr1_el1); ttbr &= ~TTBR_ASID_MASK; /* reserved_pg_dir placed before swapper_pg_dir */ - write_sysreg(ttbr - PAGE_SIZE, ttbr0_el1); + write_sysreg(ttbr - RESERVED_SWAPPER_OFFSET, ttbr0_el1); isb(); /* Set reserved ASID */ write_sysreg(ttbr, ttbr1_el1); diff --git a/arch/arm64/include/asm/unistd.h b/arch/arm64/include/asm/unistd.h index 86a9d7b3eabe..949788f5ba40 100644 --- a/arch/arm64/include/asm/unistd.h +++ b/arch/arm64/include/asm/unistd.h @@ -38,7 +38,7 @@ #define __ARM_NR_compat_set_tls (__ARM_NR_COMPAT_BASE + 5) #define __ARM_NR_COMPAT_END (__ARM_NR_COMPAT_BASE + 0x800) -#define __NR_compat_syscalls 442 +#define __NR_compat_syscalls 443 #endif #define __ARCH_WANT_SYS_CLONE diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h index cccfbbefbf95..3d874f624056 100644 --- a/arch/arm64/include/asm/unistd32.h +++ b/arch/arm64/include/asm/unistd32.h @@ -891,6 +891,8 @@ __SYSCALL(__NR_faccessat2, sys_faccessat2) __SYSCALL(__NR_process_madvise, sys_process_madvise) #define __NR_epoll_pwait2 441 __SYSCALL(__NR_epoll_pwait2, compat_sys_epoll_pwait2) +#define __NR_mount_setattr 442 +__SYSCALL(__NR_mount_setattr, sys_mount_setattr) /* * Please add new compat syscalls above this comment and update diff --git a/arch/arm64/include/asm/virt.h b/arch/arm64/include/asm/virt.h index ee6a48df89d9..7379f35ae2c6 100644 --- a/arch/arm64/include/asm/virt.h +++ b/arch/arm64/include/asm/virt.h @@ -35,8 +35,13 @@ */ #define HVC_RESET_VECTORS 2 +/* + * HVC_VHE_RESTART - Upgrade the CPU from EL1 to EL2, if possible + */ +#define HVC_VHE_RESTART 3 + /* Max number of HYP stub hypercalls */ -#define HVC_STUB_HCALL_NR 3 +#define HVC_STUB_HCALL_NR 4 /* Error returned when an invalid stub number is passed into x0 */ #define HVC_STUB_ERR 0xbadca11 diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile index 86364ab6f13f..ed65576ce710 100644 --- a/arch/arm64/kernel/Makefile +++ b/arch/arm64/kernel/Makefile @@ -17,7 +17,7 @@ obj-y := debug-monitors.o entry.o irq.o fpsimd.o \ return_address.o cpuinfo.o cpu_errata.o \ cpufeature.o alternative.o cacheinfo.o \ smp.o smp_spin_table.o topology.o smccc-call.o \ - syscall.o proton-pack.o + syscall.o proton-pack.o idreg-override.o targets += efi-entry.o @@ -59,9 +59,10 @@ obj-$(CONFIG_CRASH_CORE) += crash_core.o obj-$(CONFIG_ARM_SDE_INTERFACE) += sdei.o obj-$(CONFIG_ARM64_PTR_AUTH) += pointer_auth.o obj-$(CONFIG_ARM64_MTE) += mte.o +obj-y += vdso-wrap.o +obj-$(CONFIG_COMPAT_VDSO) += vdso32-wrap.o -obj-y += vdso/ probes/ -obj-$(CONFIG_COMPAT_VDSO) += vdso32/ +obj-y += probes/ head-y := head.o extra-y += $(head-y) vmlinux.lds diff --git a/arch/arm64/kernel/acpi_numa.c b/arch/arm64/kernel/acpi_numa.c index 7ff800045434..fdfecf0991ce 100644 --- a/arch/arm64/kernel/acpi_numa.c +++ b/arch/arm64/kernel/acpi_numa.c @@ -118,15 +118,3 @@ void __init acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa) node_set(node, numa_nodes_parsed); } -int __init arm64_acpi_numa_init(void) -{ - int ret; - - ret = acpi_numa_init(); - if (ret) { - pr_info("Failed to initialise from firmware\n"); - return ret; - } - - return srat_disabled() ? -EINVAL : 0; -} diff --git a/arch/arm64/kernel/alternative.c b/arch/arm64/kernel/alternative.c index a57cffb752e8..1184c44ea2c7 100644 --- a/arch/arm64/kernel/alternative.c +++ b/arch/arm64/kernel/alternative.c @@ -17,7 +17,7 @@ #include <asm/sections.h> #include <linux/stop_machine.h> -#define __ALT_PTR(a,f) ((void *)&(a)->f + (a)->f) +#define __ALT_PTR(a, f) ((void *)&(a)->f + (a)->f) #define ALT_ORIG_PTR(a) __ALT_PTR(a, orig_offset) #define ALT_REPL_PTR(a) __ALT_PTR(a, alt_offset) diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c index 301784463587..a36e2fc330d4 100644 --- a/arch/arm64/kernel/asm-offsets.c +++ b/arch/arm64/kernel/asm-offsets.c @@ -99,6 +99,9 @@ int main(void) DEFINE(CPU_BOOT_STACK, offsetof(struct secondary_data, stack)); DEFINE(CPU_BOOT_TASK, offsetof(struct secondary_data, task)); BLANK(); + DEFINE(FTR_OVR_VAL_OFFSET, offsetof(struct arm64_ftr_override, val)); + DEFINE(FTR_OVR_MASK_OFFSET, offsetof(struct arm64_ftr_override, mask)); + BLANK(); #ifdef CONFIG_KVM DEFINE(VCPU_CONTEXT, offsetof(struct kvm_vcpu, arch.ctxt)); DEFINE(VCPU_FAULT_DISR, offsetof(struct kvm_vcpu, arch.fault.disr_el1)); diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c index a63428301f42..506a1cd37973 100644 --- a/arch/arm64/kernel/cpu_errata.c +++ b/arch/arm64/kernel/cpu_errata.c @@ -107,8 +107,6 @@ cpu_enable_trap_ctr_access(const struct arm64_cpu_capabilities *cap) } #ifdef CONFIG_ARM64_ERRATUM_1463225 -DEFINE_PER_CPU(int, __in_cortex_a76_erratum_1463225_wa); - static bool has_cortex_a76_erratum_1463225(const struct arm64_cpu_capabilities *entry, int scope) diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index 3e6331b64932..066030717a4c 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -352,9 +352,12 @@ static const struct arm64_ftr_bits ftr_ctr[] = { ARM64_FTR_END, }; +static struct arm64_ftr_override __ro_after_init no_override = { }; + struct arm64_ftr_reg arm64_ftr_reg_ctrel0 = { .name = "SYS_CTR_EL0", - .ftr_bits = ftr_ctr + .ftr_bits = ftr_ctr, + .override = &no_override, }; static const struct arm64_ftr_bits ftr_id_mmfr0[] = { @@ -544,13 +547,20 @@ static const struct arm64_ftr_bits ftr_raz[] = { ARM64_FTR_END, }; -#define ARM64_FTR_REG(id, table) { \ - .sys_id = id, \ - .reg = &(struct arm64_ftr_reg){ \ - .name = #id, \ - .ftr_bits = &((table)[0]), \ +#define ARM64_FTR_REG_OVERRIDE(id, table, ovr) { \ + .sys_id = id, \ + .reg = &(struct arm64_ftr_reg){ \ + .name = #id, \ + .override = (ovr), \ + .ftr_bits = &((table)[0]), \ }} +#define ARM64_FTR_REG(id, table) ARM64_FTR_REG_OVERRIDE(id, table, &no_override) + +struct arm64_ftr_override __ro_after_init id_aa64mmfr1_override; +struct arm64_ftr_override __ro_after_init id_aa64pfr1_override; +struct arm64_ftr_override __ro_after_init id_aa64isar1_override; + static const struct __ftr_reg_entry { u32 sys_id; struct arm64_ftr_reg *reg; @@ -585,7 +595,8 @@ static const struct __ftr_reg_entry { /* Op1 = 0, CRn = 0, CRm = 4 */ ARM64_FTR_REG(SYS_ID_AA64PFR0_EL1, ftr_id_aa64pfr0), - ARM64_FTR_REG(SYS_ID_AA64PFR1_EL1, ftr_id_aa64pfr1), + ARM64_FTR_REG_OVERRIDE(SYS_ID_AA64PFR1_EL1, ftr_id_aa64pfr1, + &id_aa64pfr1_override), ARM64_FTR_REG(SYS_ID_AA64ZFR0_EL1, ftr_id_aa64zfr0), /* Op1 = 0, CRn = 0, CRm = 5 */ @@ -594,11 +605,13 @@ static const struct __ftr_reg_entry { /* Op1 = 0, CRn = 0, CRm = 6 */ ARM64_FTR_REG(SYS_ID_AA64ISAR0_EL1, ftr_id_aa64isar0), - ARM64_FTR_REG(SYS_ID_AA64ISAR1_EL1, ftr_id_aa64isar1), + ARM64_FTR_REG_OVERRIDE(SYS_ID_AA64ISAR1_EL1, ftr_id_aa64isar1, + &id_aa64isar1_override), /* Op1 = 0, CRn = 0, CRm = 7 */ ARM64_FTR_REG(SYS_ID_AA64MMFR0_EL1, ftr_id_aa64mmfr0), - ARM64_FTR_REG(SYS_ID_AA64MMFR1_EL1, ftr_id_aa64mmfr1), + ARM64_FTR_REG_OVERRIDE(SYS_ID_AA64MMFR1_EL1, ftr_id_aa64mmfr1, + &id_aa64mmfr1_override), ARM64_FTR_REG(SYS_ID_AA64MMFR2_EL1, ftr_id_aa64mmfr2), /* Op1 = 0, CRn = 1, CRm = 2 */ @@ -770,6 +783,33 @@ static void __init init_cpu_ftr_reg(u32 sys_reg, u64 new) for (ftrp = reg->ftr_bits; ftrp->width; ftrp++) { u64 ftr_mask = arm64_ftr_mask(ftrp); s64 ftr_new = arm64_ftr_value(ftrp, new); + s64 ftr_ovr = arm64_ftr_value(ftrp, reg->override->val); + + if ((ftr_mask & reg->override->mask) == ftr_mask) { + s64 tmp = arm64_ftr_safe_value(ftrp, ftr_ovr, ftr_new); + char *str = NULL; + + if (ftr_ovr != tmp) { + /* Unsafe, remove the override */ + reg->override->mask &= ~ftr_mask; + reg->override->val &= ~ftr_mask; + tmp = ftr_ovr; + str = "ignoring override"; + } else if (ftr_new != tmp) { + /* Override was valid */ + ftr_new = tmp; + str = "forced"; + } else if (ftr_ovr == tmp) { + /* Override was the safe value */ + str = "already set"; + } + + if (str) + pr_warn("%s[%d:%d]: %s to %llx\n", + reg->name, + ftrp->shift + ftrp->width - 1, + ftrp->shift, str, tmp); + } val = arm64_ftr_set_value(ftrp, val, ftr_new); @@ -1115,14 +1155,17 @@ u64 read_sanitised_ftr_reg(u32 id) EXPORT_SYMBOL_GPL(read_sanitised_ftr_reg); #define read_sysreg_case(r) \ - case r: return read_sysreg_s(r) + case r: val = read_sysreg_s(r); break; /* * __read_sysreg_by_encoding() - Used by a STARTING cpu before cpuinfo is populated. * Read the system register on the current CPU */ -static u64 __read_sysreg_by_encoding(u32 sys_id) +u64 __read_sysreg_by_encoding(u32 sys_id) { + struct arm64_ftr_reg *regp; + u64 val; + switch (sys_id) { read_sysreg_case(SYS_ID_PFR0_EL1); read_sysreg_case(SYS_ID_PFR1_EL1); @@ -1165,6 +1208,14 @@ static u64 __read_sysreg_by_encoding(u32 sys_id) BUG(); return 0; } + + regp = get_arm64_ftr_reg(sys_id); + if (regp) { + val &= ~regp->override->mask; + val |= (regp->override->val & regp->override->mask); + } + + return val; } #include <linux/irqchip/arm-gic-v3.h> @@ -1455,7 +1506,7 @@ static bool cpu_has_broken_dbm(void) /* List of CPUs which have broken DBM support. */ static const struct midr_range cpus[] = { #ifdef CONFIG_ARM64_ERRATUM_1024718 - MIDR_RANGE(MIDR_CORTEX_A55, 0, 0, 1, 0), // A55 r0p0 -r1p0 + MIDR_ALL_VERSIONS(MIDR_CORTEX_A55), /* Kryo4xx Silver (rdpe => r1p0) */ MIDR_REV(MIDR_QCOM_KRYO_4XX_SILVER, 0xd, 0xe), #endif diff --git a/arch/arm64/kernel/entry-common.c b/arch/arm64/kernel/entry-common.c index 5346953e4382..9d3588450473 100644 --- a/arch/arm64/kernel/entry-common.c +++ b/arch/arm64/kernel/entry-common.c @@ -109,6 +109,55 @@ asmlinkage void noinstr exit_el1_irq_or_nmi(struct pt_regs *regs) exit_to_kernel_mode(regs); } +#ifdef CONFIG_ARM64_ERRATUM_1463225 +static DEFINE_PER_CPU(int, __in_cortex_a76_erratum_1463225_wa); + +static void cortex_a76_erratum_1463225_svc_handler(void) +{ + u32 reg, val; + + if (!unlikely(test_thread_flag(TIF_SINGLESTEP))) + return; + + if (!unlikely(this_cpu_has_cap(ARM64_WORKAROUND_1463225))) + return; + + __this_cpu_write(__in_cortex_a76_erratum_1463225_wa, 1); + reg = read_sysreg(mdscr_el1); + val = reg | DBG_MDSCR_SS | DBG_MDSCR_KDE; + write_sysreg(val, mdscr_el1); + asm volatile("msr daifclr, #8"); + isb(); + + /* We will have taken a single-step exception by this point */ + + write_sysreg(reg, mdscr_el1); + __this_cpu_write(__in_cortex_a76_erratum_1463225_wa, 0); +} + +static bool cortex_a76_erratum_1463225_debug_handler(struct pt_regs *regs) +{ + if (!__this_cpu_read(__in_cortex_a76_erratum_1463225_wa)) + return false; + + /* + * We've taken a dummy step exception from the kernel to ensure + * that interrupts are re-enabled on the syscall path. Return back + * to cortex_a76_erratum_1463225_svc_handler() with debug exceptions + * masked so that we can safely restore the mdscr and get on with + * handling the syscall. + */ + regs->pstate |= PSR_D_BIT; + return true; +} +#else /* CONFIG_ARM64_ERRATUM_1463225 */ +static void cortex_a76_erratum_1463225_svc_handler(void) { } +static bool cortex_a76_erratum_1463225_debug_handler(struct pt_regs *regs) +{ + return false; +} +#endif /* CONFIG_ARM64_ERRATUM_1463225 */ + static void noinstr el1_abort(struct pt_regs *regs, unsigned long esr) { unsigned long far = read_sysreg(far_el1); @@ -186,7 +235,8 @@ static void noinstr el1_dbg(struct pt_regs *regs, unsigned long esr) gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET); arm64_enter_el1_dbg(regs); - do_debug_exception(far, esr, regs); + if (!cortex_a76_erratum_1463225_debug_handler(regs)) + do_debug_exception(far, esr, regs); arm64_exit_el1_dbg(regs); } @@ -362,6 +412,7 @@ static void noinstr el0_svc(struct pt_regs *regs) gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET); enter_from_user_mode(); + cortex_a76_erratum_1463225_svc_handler(); do_el0_svc(regs); } @@ -439,6 +490,7 @@ static void noinstr el0_svc_compat(struct pt_regs *regs) gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET); enter_from_user_mode(); + cortex_a76_erratum_1463225_svc_handler(); do_el0_svc_compat(regs); } diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index c9bae73f2621..a31a0a713c85 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -261,16 +261,16 @@ alternative_else_nop_endif stp lr, x21, [sp, #S_LR] /* - * In order to be able to dump the contents of struct pt_regs at the - * time the exception was taken (in case we attempt to walk the call - * stack later), chain it together with the stack frames. + * For exceptions from EL0, terminate the callchain here. + * For exceptions from EL1, create a synthetic frame record so the + * interrupted code shows up in the backtrace. */ .if \el == 0 - stp xzr, xzr, [sp, #S_STACKFRAME] + mov x29, xzr .else stp x29, x22, [sp, #S_STACKFRAME] - .endif add x29, sp, #S_STACKFRAME + .endif #ifdef CONFIG_ARM64_SW_TTBR0_PAN alternative_if_not ARM64_HAS_PAN @@ -805,7 +805,7 @@ SYM_CODE_END(ret_to_user) // Move from tramp_pg_dir to swapper_pg_dir .macro tramp_map_kernel, tmp mrs \tmp, ttbr1_el1 - add \tmp, \tmp, #(2 * PAGE_SIZE) + add \tmp, \tmp, #TRAMP_SWAPPER_OFFSET bic \tmp, \tmp, #USER_ASID_FLAG msr ttbr1_el1, \tmp #ifdef CONFIG_QCOM_FALKOR_ERRATUM_1003 @@ -825,7 +825,7 @@ alternative_else_nop_endif // Move from swapper_pg_dir to tramp_pg_dir .macro tramp_unmap_kernel, tmp mrs \tmp, ttbr1_el1 - sub \tmp, \tmp, #(2 * PAGE_SIZE) + sub \tmp, \tmp, #TRAMP_SWAPPER_OFFSET orr \tmp, \tmp, #USER_ASID_FLAG msr ttbr1_el1, \tmp /* diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S index a0dc987724ed..840bda1869e9 100644 --- a/arch/arm64/kernel/head.S +++ b/arch/arm64/kernel/head.S @@ -319,7 +319,7 @@ SYM_FUNC_START_LOCAL(__create_page_tables) */ adrp x5, __idmap_text_end clz x5, x5 - cmp x5, TCR_T0SZ(VA_BITS) // default T0SZ small enough? + cmp x5, TCR_T0SZ(VA_BITS_MIN) // default T0SZ small enough? b.ge 1f // .. then skip VA range extension adr_l x6, idmap_t0sz @@ -404,10 +404,6 @@ SYM_FUNC_START_LOCAL(__primary_switched) adr_l x5, init_task msr sp_el0, x5 // Save thread_info -#ifdef CONFIG_ARM64_PTR_AUTH - __ptrauth_keys_init_cpu x5, x6, x7, x8 -#endif - adr_l x8, vectors // load VBAR_EL1 with virtual msr vbar_el1, x8 // vector table address isb @@ -436,10 +432,12 @@ SYM_FUNC_START_LOCAL(__primary_switched) #if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS) bl kasan_early_init #endif + mov x0, x21 // pass FDT address in x0 + bl early_fdt_map // Try mapping the FDT early + bl init_feature_override // Parse cpu feature overrides #ifdef CONFIG_RANDOMIZE_BASE tst x23, ~(MIN_KIMG_ALIGN - 1) // already running randomized? b.ne 0f - mov x0, x21 // pass FDT address in x0 bl kaslr_early_init // parse FDT for KASLR options cbz x0, 0f // KASLR disabled? just proceed orr x23, x23, x0 // record KASLR offset @@ -447,6 +445,7 @@ SYM_FUNC_START_LOCAL(__primary_switched) ret // to __primary_switch() 0: #endif + bl switch_to_vhe // Prefer VHE if possible add sp, sp, #16 mov x29, #0 mov x30, #0 @@ -478,13 +477,14 @@ EXPORT_SYMBOL(kimage_vaddr) * booted in EL1 or EL2 respectively. */ SYM_FUNC_START(init_kernel_el) + mov_q x0, INIT_SCTLR_EL1_MMU_OFF + msr sctlr_el1, x0 + mrs x0, CurrentEL cmp x0, #CurrentEL_EL2 b.eq init_el2 SYM_INNER_LABEL(init_el1, SYM_L_LOCAL) - mov_q x0, INIT_SCTLR_EL1_MMU_OFF - msr sctlr_el1, x0 isb mov_q x0, INIT_PSTATE_EL1 msr spsr_el1, x0 @@ -493,50 +493,11 @@ SYM_INNER_LABEL(init_el1, SYM_L_LOCAL) eret SYM_INNER_LABEL(init_el2, SYM_L_LOCAL) -#ifdef CONFIG_ARM64_VHE - /* - * Check for VHE being present. x2 being non-zero indicates that we - * do have VHE, and that the kernel is intended to run at EL2. - */ - mrs x2, id_aa64mmfr1_el1 - ubfx x2, x2, #ID_AA64MMFR1_VHE_SHIFT, #4 -#else - mov x2, xzr -#endif - cbz x2, init_el2_nvhe - - /* - * When VHE _is_ in use, EL1 will not be used in the host and - * requires no configuration, and all non-hyp-specific EL2 setup - * will be done via the _EL1 system register aliases in __cpu_setup. - */ - mov_q x0, HCR_HOST_VHE_FLAGS - msr hcr_el2, x0 - isb - - init_el2_state vhe - - isb - - mov_q x0, INIT_PSTATE_EL2 - msr spsr_el2, x0 - msr elr_el2, lr - mov w0, #BOOT_CPU_MODE_EL2 - eret - -SYM_INNER_LABEL(init_el2_nvhe, SYM_L_LOCAL) - /* - * When VHE is not in use, early init of EL2 and EL1 needs to be - * done here. - */ - mov_q x0, INIT_SCTLR_EL1_MMU_OFF - msr sctlr_el1, x0 - mov_q x0, HCR_HOST_NVHE_FLAGS msr hcr_el2, x0 isb - init_el2_state nvhe + init_el2_state /* Hypervisor stub */ adr_l x0, __hyp_stub_vectors @@ -623,6 +584,7 @@ SYM_FUNC_START_LOCAL(secondary_startup) /* * Common entry point for secondary CPUs. */ + bl switch_to_vhe bl __cpu_secondary_check52bitva bl __cpu_setup // initialise processor adrp x1, swapper_pg_dir @@ -693,8 +655,10 @@ SYM_FUNC_END(__secondary_too_slow) SYM_FUNC_START(__enable_mmu) mrs x2, ID_AA64MMFR0_EL1 ubfx x2, x2, #ID_AA64MMFR0_TGRAN_SHIFT, 4 - cmp x2, #ID_AA64MMFR0_TGRAN_SUPPORTED - b.ne __no_granule_support + cmp x2, #ID_AA64MMFR0_TGRAN_SUPPORTED_MIN + b.lt __no_granule_support + cmp x2, #ID_AA64MMFR0_TGRAN_SUPPORTED_MAX + b.gt __no_granule_support update_early_cpu_boot_status 0, x2, x3 adrp x2, idmap_pg_dir phys_to_ttbr x1, x1 @@ -703,16 +667,9 @@ SYM_FUNC_START(__enable_mmu) offset_ttbr1 x1, x3 msr ttbr1_el1, x1 // load TTBR1 isb - msr sctlr_el1, x0 - isb - /* - * Invalidate the local I-cache so that any instructions fetched - * speculatively from the PoC are discarded, since they may have - * been dynamically patched at the PoU. - */ - ic iallu - dsb nsh - isb + + set_sctlr_el1 x0 + ret SYM_FUNC_END(__enable_mmu) @@ -882,13 +839,10 @@ SYM_FUNC_START_LOCAL(__primary_switch) tlbi vmalle1 // Remove any stale TLB entries dsb nsh - - msr sctlr_el1, x19 // re-enable the MMU - isb - ic iallu // flush instructions fetched - dsb nsh // via old mapping isb + set_sctlr_el1 x19 // re-enable the MMU + bl __relocate_kernel #endif #endif diff --git a/arch/arm64/kernel/hibernate.c b/arch/arm64/kernel/hibernate.c index 9c9f47e9f7f4..b1cef371df2b 100644 --- a/arch/arm64/kernel/hibernate.c +++ b/arch/arm64/kernel/hibernate.c @@ -16,7 +16,6 @@ #define pr_fmt(x) "hibernate: " x #include <linux/cpu.h> #include <linux/kvm_host.h> -#include <linux/mm.h> #include <linux/pm.h> #include <linux/sched.h> #include <linux/suspend.h> @@ -31,13 +30,12 @@ #include <asm/memory.h> #include <asm/mmu_context.h> #include <asm/mte.h> -#include <asm/pgalloc.h> -#include <asm/pgtable-hwdef.h> #include <asm/sections.h> #include <asm/smp.h> #include <asm/smp_plat.h> #include <asm/suspend.h> #include <asm/sysreg.h> +#include <asm/trans_pgd.h> #include <asm/virt.h> /* @@ -178,52 +176,9 @@ int arch_hibernation_header_restore(void *addr) } EXPORT_SYMBOL(arch_hibernation_header_restore); -static int trans_pgd_map_page(pgd_t *trans_pgd, void *page, - unsigned long dst_addr, - pgprot_t pgprot) +static void *hibernate_page_alloc(void *arg) { - pgd_t *pgdp; - p4d_t *p4dp; - pud_t *pudp; - pmd_t *pmdp; - pte_t *ptep; - - pgdp = pgd_offset_pgd(trans_pgd, dst_addr); - if (pgd_none(READ_ONCE(*pgdp))) { - pudp = (void *)get_safe_page(GFP_ATOMIC); - if (!pudp) - return -ENOMEM; - pgd_populate(&init_mm, pgdp, pudp); - } - - p4dp = p4d_offset(pgdp, dst_addr); - if (p4d_none(READ_ONCE(*p4dp))) { - pudp = (void *)get_safe_page(GFP_ATOMIC); - if (!pudp) - return -ENOMEM; - p4d_populate(&init_mm, p4dp, pudp); - } - - pudp = pud_offset(p4dp, dst_addr); - if (pud_none(READ_ONCE(*pudp))) { - pmdp = (void *)get_safe_page(GFP_ATOMIC); - if (!pmdp) - return -ENOMEM; - pud_populate(&init_mm, pudp, pmdp); - } - - pmdp = pmd_offset(pudp, dst_addr); - if (pmd_none(READ_ONCE(*pmdp))) { - ptep = (void *)get_safe_page(GFP_ATOMIC); - if (!ptep) - return -ENOMEM; - pmd_populate_kernel(&init_mm, pmdp, ptep); - } - - ptep = pte_offset_kernel(pmdp, dst_addr); - set_pte(ptep, pfn_pte(virt_to_pfn(page), PAGE_KERNEL_EXEC)); - - return 0; + return (void *)get_safe_page((__force gfp_t)(unsigned long)arg); } /* @@ -239,11 +194,16 @@ static int trans_pgd_map_page(pgd_t *trans_pgd, void *page, * page system. */ static int create_safe_exec_page(void *src_start, size_t length, - unsigned long dst_addr, phys_addr_t *phys_dst_addr) { + struct trans_pgd_info trans_info = { + .trans_alloc_page = hibernate_page_alloc, + .trans_alloc_arg = (__force void *)GFP_ATOMIC, + }; + void *page = (void *)get_safe_page(GFP_ATOMIC); - pgd_t *trans_pgd; + phys_addr_t trans_ttbr0; + unsigned long t0sz; int rc; if (!page) @@ -251,13 +211,7 @@ static int create_safe_exec_page(void *src_start, size_t length, memcpy(page, src_start, length); __flush_icache_range((unsigned long)page, (unsigned long)page + length); - - trans_pgd = (void *)get_safe_page(GFP_ATOMIC); - if (!trans_pgd) - return -ENOMEM; - - rc = trans_pgd_map_page(trans_pgd, page, dst_addr, - PAGE_KERNEL_EXEC); + rc = trans_pgd_idmap_page(&trans_info, &trans_ttbr0, &t0sz, page); if (rc) return rc; @@ -270,12 +224,15 @@ static int create_safe_exec_page(void *src_start, size_t length, * page, but TLBs may contain stale ASID-tagged entries (e.g. for EFI * runtime services), while for a userspace-driven test_resume cycle it * points to userspace page tables (and we must point it at a zero page - * ourselves). Elsewhere we only (un)install the idmap with preemption - * disabled, so T0SZ should be as required regardless. + * ourselves). + * + * We change T0SZ as part of installing the idmap. This is undone by + * cpu_uninstall_idmap() in __cpu_suspend_exit(). */ cpu_set_reserved_ttbr0(); local_flush_tlb_all(); - write_sysreg(phys_to_ttbr(virt_to_phys(trans_pgd)), ttbr0_el1); + __cpu_set_tcr_t0sz(t0sz); + write_sysreg(trans_ttbr0, ttbr0_el1); isb(); *phys_dst_addr = virt_to_phys(page); @@ -462,182 +419,6 @@ int swsusp_arch_suspend(void) return ret; } -static void _copy_pte(pte_t *dst_ptep, pte_t *src_ptep, unsigned long addr) -{ - pte_t pte = READ_ONCE(*src_ptep); - - if (pte_valid(pte)) { - /* - * Resume will overwrite areas that may be marked - * read only (code, rodata). Clear the RDONLY bit from - * the temporary mappings we use during restore. - */ - set_pte(dst_ptep, pte_mkwrite(pte)); - } else if (debug_pagealloc_enabled() && !pte_none(pte)) { - /* - * debug_pagealloc will removed the PTE_VALID bit if - * the page isn't in use by the resume kernel. It may have - * been in use by the original kernel, in which case we need - * to put it back in our copy to do the restore. - * - * Before marking this entry valid, check the pfn should - * be mapped. - */ - BUG_ON(!pfn_valid(pte_pfn(pte))); - - set_pte(dst_ptep, pte_mkpresent(pte_mkwrite(pte))); - } -} - -static int copy_pte(pmd_t *dst_pmdp, pmd_t *src_pmdp, unsigned long start, - unsigned long end) -{ - pte_t *src_ptep; - pte_t *dst_ptep; - unsigned long addr = start; - - dst_ptep = (pte_t *)get_safe_page(GFP_ATOMIC); - if (!dst_ptep) - return -ENOMEM; - pmd_populate_kernel(&init_mm, dst_pmdp, dst_ptep); - dst_ptep = pte_offset_kernel(dst_pmdp, start); - - src_ptep = pte_offset_kernel(src_pmdp, start); - do { - _copy_pte(dst_ptep, src_ptep, addr); - } while (dst_ptep++, src_ptep++, addr += PAGE_SIZE, addr != end); - - return 0; -} - -static int copy_pmd(pud_t *dst_pudp, pud_t *src_pudp, unsigned long start, - unsigned long end) -{ - pmd_t *src_pmdp; - pmd_t *dst_pmdp; - unsigned long next; - unsigned long addr = start; - - if (pud_none(READ_ONCE(*dst_pudp))) { - dst_pmdp = (pmd_t *)get_safe_page(GFP_ATOMIC); - if (!dst_pmdp) - return -ENOMEM; - pud_populate(&init_mm, dst_pudp, dst_pmdp); - } - dst_pmdp = pmd_offset(dst_pudp, start); - - src_pmdp = pmd_offset(src_pudp, start); - do { - pmd_t pmd = READ_ONCE(*src_pmdp); - - next = pmd_addr_end(addr, end); - if (pmd_none(pmd)) - continue; - if (pmd_table(pmd)) { - if (copy_pte(dst_pmdp, src_pmdp, addr, next)) - return -ENOMEM; - } else { - set_pmd(dst_pmdp, - __pmd(pmd_val(pmd) & ~PMD_SECT_RDONLY)); - } - } while (dst_pmdp++, src_pmdp++, addr = next, addr != end); - - return 0; -} - -static int copy_pud(p4d_t *dst_p4dp, p4d_t *src_p4dp, unsigned long start, - unsigned long end) -{ - pud_t *dst_pudp; - pud_t *src_pudp; - unsigned long next; - unsigned long addr = start; - - if (p4d_none(READ_ONCE(*dst_p4dp))) { - dst_pudp = (pud_t *)get_safe_page(GFP_ATOMIC); - if (!dst_pudp) - return -ENOMEM; - p4d_populate(&init_mm, dst_p4dp, dst_pudp); - } - dst_pudp = pud_offset(dst_p4dp, start); - - src_pudp = pud_offset(src_p4dp, start); - do { - pud_t pud = READ_ONCE(*src_pudp); - - next = pud_addr_end(addr, end); - if (pud_none(pud)) - continue; - if (pud_table(pud)) { - if (copy_pmd(dst_pudp, src_pudp, addr, next)) - return -ENOMEM; - } else { - set_pud(dst_pudp, - __pud(pud_val(pud) & ~PUD_SECT_RDONLY)); - } - } while (dst_pudp++, src_pudp++, addr = next, addr != end); - - return 0; -} - -static int copy_p4d(pgd_t *dst_pgdp, pgd_t *src_pgdp, unsigned long start, - unsigned long end) -{ - p4d_t *dst_p4dp; - p4d_t *src_p4dp; - unsigned long next; - unsigned long addr = start; - - dst_p4dp = p4d_offset(dst_pgdp, start); - src_p4dp = p4d_offset(src_pgdp, start); - do { - next = p4d_addr_end(addr, end); - if (p4d_none(READ_ONCE(*src_p4dp))) - continue; - if (copy_pud(dst_p4dp, src_p4dp, addr, next)) - return -ENOMEM; - } while (dst_p4dp++, src_p4dp++, addr = next, addr != end); - - return 0; -} - -static int copy_page_tables(pgd_t *dst_pgdp, unsigned long start, - unsigned long end) -{ - unsigned long next; - unsigned long addr = start; - pgd_t *src_pgdp = pgd_offset_k(start); - - dst_pgdp = pgd_offset_pgd(dst_pgdp, start); - do { - next = pgd_addr_end(addr, end); - if (pgd_none(READ_ONCE(*src_pgdp))) - continue; - if (copy_p4d(dst_pgdp, src_pgdp, addr, next)) - return -ENOMEM; - } while (dst_pgdp++, src_pgdp++, addr = next, addr != end); - - return 0; -} - -static int trans_pgd_create_copy(pgd_t **dst_pgdp, unsigned long start, - unsigned long end) -{ - int rc; - pgd_t *trans_pgd = (pgd_t *)get_safe_page(GFP_ATOMIC); - - if (!trans_pgd) { - pr_err("Failed to allocate memory for temporary page tables.\n"); - return -ENOMEM; - } - - rc = copy_page_tables(trans_pgd, start, end); - if (!rc) - *dst_pgdp = trans_pgd; - - return rc; -} - /* * Setup then Resume from the hibernate image using swsusp_arch_suspend_exit(). * @@ -650,16 +431,20 @@ int swsusp_arch_resume(void) void *zero_page; size_t exit_size; pgd_t *tmp_pg_dir; - phys_addr_t phys_hibernate_exit; void __noreturn (*hibernate_exit)(phys_addr_t, phys_addr_t, void *, void *, phys_addr_t, phys_addr_t); + struct trans_pgd_info trans_info = { + .trans_alloc_page = hibernate_page_alloc, + .trans_alloc_arg = (void *)GFP_ATOMIC, + }; /* * Restoring the memory image will overwrite the ttbr1 page tables. * Create a second copy of just the linear map, and use this when * restoring. */ - rc = trans_pgd_create_copy(&tmp_pg_dir, PAGE_OFFSET, PAGE_END); + rc = trans_pgd_create_copy(&trans_info, &tmp_pg_dir, PAGE_OFFSET, + PAGE_END); if (rc) return rc; @@ -673,19 +458,13 @@ int swsusp_arch_resume(void) return -ENOMEM; } - /* - * Locate the exit code in the bottom-but-one page, so that *NULL - * still has disastrous affects. - */ - hibernate_exit = (void *)PAGE_SIZE; exit_size = __hibernate_exit_text_end - __hibernate_exit_text_start; /* * Copy swsusp_arch_suspend_exit() to a safe page. This will generate * a new set of ttbr0 page tables and load them. */ rc = create_safe_exec_page(__hibernate_exit_text_start, exit_size, - (unsigned long)hibernate_exit, - &phys_hibernate_exit); + (phys_addr_t *)&hibernate_exit); if (rc) { pr_err("Failed to create safe executable page for hibernate_exit code.\n"); return rc; @@ -704,7 +483,7 @@ int swsusp_arch_resume(void) * We can skip this step if we booted at EL1, or are running with VHE. */ if (el2_reset_needed()) { - phys_addr_t el2_vectors = phys_hibernate_exit; /* base */ + phys_addr_t el2_vectors = (phys_addr_t)hibernate_exit; el2_vectors += hibernate_el2_vectors - __hibernate_exit_text_start; /* offset */ diff --git a/arch/arm64/kernel/hyp-stub.S b/arch/arm64/kernel/hyp-stub.S index 160f5881a0b7..5eccbd62fec8 100644 --- a/arch/arm64/kernel/hyp-stub.S +++ b/arch/arm64/kernel/hyp-stub.S @@ -8,9 +8,9 @@ #include <linux/init.h> #include <linux/linkage.h> -#include <linux/irqchip/arm-gic-v3.h> #include <asm/assembler.h> +#include <asm/el2_setup.h> #include <asm/kvm_arm.h> #include <asm/kvm_asm.h> #include <asm/ptrace.h> @@ -47,10 +47,13 @@ SYM_CODE_END(__hyp_stub_vectors) SYM_CODE_START_LOCAL(el1_sync) cmp x0, #HVC_SET_VECTORS - b.ne 2f + b.ne 1f msr vbar_el2, x1 b 9f +1: cmp x0, #HVC_VHE_RESTART + b.eq mutate_to_vhe + 2: cmp x0, #HVC_SOFT_RESTART b.ne 3f mov x0, x2 @@ -70,6 +73,102 @@ SYM_CODE_START_LOCAL(el1_sync) eret SYM_CODE_END(el1_sync) +// nVHE? No way! Give me the real thing! +SYM_CODE_START_LOCAL(mutate_to_vhe) + // Sanity check: MMU *must* be off + mrs x1, sctlr_el2 + tbnz x1, #0, 1f + + // Needs to be VHE capable, obviously + mrs x1, id_aa64mmfr1_el1 + ubfx x1, x1, #ID_AA64MMFR1_VHE_SHIFT, #4 + cbz x1, 1f + + // Check whether VHE is disabled from the command line + adr_l x1, id_aa64mmfr1_override + ldr x2, [x1, FTR_OVR_VAL_OFFSET] + ldr x1, [x1, FTR_OVR_MASK_OFFSET] + ubfx x2, x2, #ID_AA64MMFR1_VHE_SHIFT, #4 + ubfx x1, x1, #ID_AA64MMFR1_VHE_SHIFT, #4 + cmp x1, xzr + and x2, x2, x1 + csinv x2, x2, xzr, ne + cbnz x2, 2f + +1: mov_q x0, HVC_STUB_ERR + eret +2: + // Engage the VHE magic! + mov_q x0, HCR_HOST_VHE_FLAGS + msr hcr_el2, x0 + isb + + // Use the EL1 allocated stack, per-cpu offset + mrs x0, sp_el1 + mov sp, x0 + mrs x0, tpidr_el1 + msr tpidr_el2, x0 + + // FP configuration, vectors + mrs_s x0, SYS_CPACR_EL12 + msr cpacr_el1, x0 + mrs_s x0, SYS_VBAR_EL12 + msr vbar_el1, x0 + + // Use EL2 translations for SPE and disable access from EL1 + mrs x0, mdcr_el2 + bic x0, x0, #(MDCR_EL2_E2PB_MASK << MDCR_EL2_E2PB_SHIFT) + msr mdcr_el2, x0 + + // Transfer the MM state from EL1 to EL2 + mrs_s x0, SYS_TCR_EL12 + msr tcr_el1, x0 + mrs_s x0, SYS_TTBR0_EL12 + msr ttbr0_el1, x0 + mrs_s x0, SYS_TTBR1_EL12 + msr ttbr1_el1, x0 + mrs_s x0, SYS_MAIR_EL12 + msr mair_el1, x0 + isb + + // Hack the exception return to stay at EL2 + mrs x0, spsr_el1 + and x0, x0, #~PSR_MODE_MASK + mov x1, #PSR_MODE_EL2h + orr x0, x0, x1 + msr spsr_el1, x0 + + b enter_vhe +SYM_CODE_END(mutate_to_vhe) + + // At the point where we reach enter_vhe(), we run with + // the MMU off (which is enforced by mutate_to_vhe()). + // We thus need to be in the idmap, or everything will + // explode when enabling the MMU. + + .pushsection .idmap.text, "ax" + +SYM_CODE_START_LOCAL(enter_vhe) + // Invalidate TLBs before enabling the MMU + tlbi vmalle1 + dsb nsh + isb + + // Enable the EL2 S1 MMU, as set up from EL1 + mrs_s x0, SYS_SCTLR_EL12 + set_sctlr_el1 x0 + + // Disable the EL1 S1 MMU for a good measure + mov_q x0, INIT_SCTLR_EL1_MMU_OFF + msr_s SYS_SCTLR_EL12, x0 + + mov x0, xzr + + eret +SYM_CODE_END(enter_vhe) + + .popsection + .macro invalid_vector label SYM_CODE_START_LOCAL(\label) b \label @@ -85,6 +184,8 @@ SYM_CODE_END(\label) invalid_vector el1_fiq_invalid invalid_vector el1_error_invalid + .popsection + /* * __hyp_set_vectors: Call this after boot to set the initial hypervisor * vectors as part of hypervisor installation. On an SMP system, this should @@ -118,3 +219,27 @@ SYM_FUNC_START(__hyp_reset_vectors) hvc #0 ret SYM_FUNC_END(__hyp_reset_vectors) + +/* + * Entry point to switch to VHE if deemed capable + */ +SYM_FUNC_START(switch_to_vhe) +#ifdef CONFIG_ARM64_VHE + // Need to have booted at EL2 + adr_l x1, __boot_cpu_mode + ldr w0, [x1] + cmp w0, #BOOT_CPU_MODE_EL2 + b.ne 1f + + // and still be at EL1 + mrs x0, CurrentEL + cmp x0, #CurrentEL_EL1 + b.ne 1f + + // Turn the world upside down + mov x0, #HVC_VHE_RESTART + hvc #0 +1: +#endif + ret +SYM_FUNC_END(switch_to_vhe) diff --git a/arch/arm64/kernel/idreg-override.c b/arch/arm64/kernel/idreg-override.c new file mode 100644 index 000000000000..83f1c4b92095 --- /dev/null +++ b/arch/arm64/kernel/idreg-override.c @@ -0,0 +1,219 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Early cpufeature override framework + * + * Copyright (C) 2020 Google LLC + * Author: Marc Zyngier <maz@kernel.org> + */ + +#include <linux/ctype.h> +#include <linux/kernel.h> +#include <linux/libfdt.h> + +#include <asm/cacheflush.h> +#include <asm/cpufeature.h> +#include <asm/setup.h> + +#define FTR_DESC_NAME_LEN 20 +#define FTR_DESC_FIELD_LEN 10 +#define FTR_ALIAS_NAME_LEN 30 +#define FTR_ALIAS_OPTION_LEN 80 + +struct ftr_set_desc { + char name[FTR_DESC_NAME_LEN]; + struct arm64_ftr_override *override; + struct { + char name[FTR_DESC_FIELD_LEN]; + u8 shift; + } fields[]; +}; + +static const struct ftr_set_desc mmfr1 __initconst = { + .name = "id_aa64mmfr1", + .override = &id_aa64mmfr1_override, + .fields = { + { "vh", ID_AA64MMFR1_VHE_SHIFT }, + {} + }, +}; + +static const struct ftr_set_desc pfr1 __initconst = { + .name = "id_aa64pfr1", + .override = &id_aa64pfr1_override, + .fields = { + { "bt", ID_AA64PFR1_BT_SHIFT }, + {} + }, +}; + +static const struct ftr_set_desc isar1 __initconst = { + .name = "id_aa64isar1", + .override = &id_aa64isar1_override, + .fields = { + { "gpi", ID_AA64ISAR1_GPI_SHIFT }, + { "gpa", ID_AA64ISAR1_GPA_SHIFT }, + { "api", ID_AA64ISAR1_API_SHIFT }, + { "apa", ID_AA64ISAR1_APA_SHIFT }, + {} + }, +}; + +extern struct arm64_ftr_override kaslr_feature_override; + +static const struct ftr_set_desc kaslr __initconst = { + .name = "kaslr", +#ifdef CONFIG_RANDOMIZE_BASE + .override = &kaslr_feature_override, +#endif + .fields = { + { "disabled", 0 }, + {} + }, +}; + +static const struct ftr_set_desc * const regs[] __initconst = { + &mmfr1, + &pfr1, + &isar1, + &kaslr, +}; + +static const struct { + char alias[FTR_ALIAS_NAME_LEN]; + char feature[FTR_ALIAS_OPTION_LEN]; +} aliases[] __initconst = { + { "kvm-arm.mode=nvhe", "id_aa64mmfr1.vh=0" }, + { "kvm-arm.mode=protected", "id_aa64mmfr1.vh=0" }, + { "arm64.nobti", "id_aa64pfr1.bt=0" }, + { "arm64.nopauth", + "id_aa64isar1.gpi=0 id_aa64isar1.gpa=0 " + "id_aa64isar1.api=0 id_aa64isar1.apa=0" }, + { "nokaslr", "kaslr.disabled=1" }, +}; + +static int __init find_field(const char *cmdline, + const struct ftr_set_desc *reg, int f, u64 *v) +{ + char opt[FTR_DESC_NAME_LEN + FTR_DESC_FIELD_LEN + 2]; + int len; + + len = snprintf(opt, ARRAY_SIZE(opt), "%s.%s=", + reg->name, reg->fields[f].name); + + if (!parameqn(cmdline, opt, len)) + return -1; + + return kstrtou64(cmdline + len, 0, v); +} + +static void __init match_options(const char *cmdline) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(regs); i++) { + int f; + + if (!regs[i]->override) + continue; + + for (f = 0; strlen(regs[i]->fields[f].name); f++) { + u64 shift = regs[i]->fields[f].shift; + u64 mask = 0xfUL << shift; + u64 v; + + if (find_field(cmdline, regs[i], f, &v)) + continue; + + regs[i]->override->val &= ~mask; + regs[i]->override->val |= (v << shift) & mask; + regs[i]->override->mask |= mask; + + return; + } + } +} + +static __init void __parse_cmdline(const char *cmdline, bool parse_aliases) +{ + do { + char buf[256]; + size_t len; + int i; + + cmdline = skip_spaces(cmdline); + + for (len = 0; cmdline[len] && !isspace(cmdline[len]); len++); + if (!len) + return; + + len = min(len, ARRAY_SIZE(buf) - 1); + strncpy(buf, cmdline, len); + buf[len] = 0; + + if (strcmp(buf, "--") == 0) + return; + + cmdline += len; + + match_options(buf); + + for (i = 0; parse_aliases && i < ARRAY_SIZE(aliases); i++) + if (parameq(buf, aliases[i].alias)) + __parse_cmdline(aliases[i].feature, false); + } while (1); +} + +static __init const u8 *get_bootargs_cmdline(void) +{ + const u8 *prop; + void *fdt; + int node; + + fdt = get_early_fdt_ptr(); + if (!fdt) + return NULL; + + node = fdt_path_offset(fdt, "/chosen"); + if (node < 0) + return NULL; + + prop = fdt_getprop(fdt, node, "bootargs", NULL); + if (!prop) + return NULL; + + return strlen(prop) ? prop : NULL; +} + +static __init void parse_cmdline(void) +{ + const u8 *prop = get_bootargs_cmdline(); + + if (IS_ENABLED(CONFIG_CMDLINE_FORCE) || !prop) + __parse_cmdline(CONFIG_CMDLINE, true); + + if (!IS_ENABLED(CONFIG_CMDLINE_FORCE) && prop) + __parse_cmdline(prop, true); +} + +/* Keep checkers quiet */ +void init_feature_override(void); + +asmlinkage void __init init_feature_override(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(regs); i++) { + if (regs[i]->override) { + regs[i]->override->val = 0; + regs[i]->override->mask = 0; + } + } + + parse_cmdline(); + + for (i = 0; i < ARRAY_SIZE(regs); i++) { + if (regs[i]->override) + __flush_dcache_area(regs[i]->override, + sizeof(*regs[i]->override)); + } +} diff --git a/arch/arm64/kernel/image-vars.h b/arch/arm64/kernel/image-vars.h index f676243abac6..5aa9ed1e9ec6 100644 --- a/arch/arm64/kernel/image-vars.h +++ b/arch/arm64/kernel/image-vars.h @@ -64,7 +64,6 @@ __efistub__ctype = _ctype; /* Alternative callbacks for init-time patching of nVHE hyp code. */ KVM_NVHE_ALIAS(kvm_patch_vector_branch); KVM_NVHE_ALIAS(kvm_update_va_mask); -KVM_NVHE_ALIAS(kvm_update_kimg_phys_offset); KVM_NVHE_ALIAS(kvm_get_kimage_voffset); /* Global kernel state accessed by nVHE hyp code. */ @@ -102,6 +101,9 @@ KVM_NVHE_ALIAS(__stop___kvm_ex_table); /* Array containing bases of nVHE per-CPU memory regions. */ KVM_NVHE_ALIAS(kvm_arm_hyp_percpu_base); +/* PMU available static key */ +KVM_NVHE_ALIAS(kvm_arm_pmu_available); + #endif /* CONFIG_KVM */ #endif /* __ARM64_KERNEL_IMAGE_VARS_H */ diff --git a/arch/arm64/kernel/kaslr.c b/arch/arm64/kernel/kaslr.c index 1c74c45b9494..27f8939deb1b 100644 --- a/arch/arm64/kernel/kaslr.c +++ b/arch/arm64/kernel/kaslr.c @@ -19,6 +19,7 @@ #include <asm/memory.h> #include <asm/mmu.h> #include <asm/sections.h> +#include <asm/setup.h> enum kaslr_status { KASLR_ENABLED, @@ -50,39 +51,7 @@ static __init u64 get_kaslr_seed(void *fdt) return ret; } -static __init bool cmdline_contains_nokaslr(const u8 *cmdline) -{ - const u8 *str; - - str = strstr(cmdline, "nokaslr"); - return str == cmdline || (str > cmdline && *(str - 1) == ' '); -} - -static __init bool is_kaslr_disabled_cmdline(void *fdt) -{ - if (!IS_ENABLED(CONFIG_CMDLINE_FORCE)) { - int node; - const u8 *prop; - - node = fdt_path_offset(fdt, "/chosen"); - if (node < 0) - goto out; - - prop = fdt_getprop(fdt, node, "bootargs", NULL); - if (!prop) - goto out; - - if (cmdline_contains_nokaslr(prop)) - return true; - - if (IS_ENABLED(CONFIG_CMDLINE_EXTEND)) - goto out; - - return false; - } -out: - return cmdline_contains_nokaslr(CONFIG_CMDLINE); -} +struct arm64_ftr_override kaslr_feature_override __initdata; /* * This routine will be executed with the kernel mapped at its default virtual @@ -92,12 +61,11 @@ out: * containing function pointers) to be reinitialized, and zero-initialized * .bss variables will be reset to 0. */ -u64 __init kaslr_early_init(u64 dt_phys) +u64 __init kaslr_early_init(void) { void *fdt; u64 seed, offset, mask, module_range; unsigned long raw; - int size; /* * Set a reasonable default for module_alloc_base in case @@ -111,8 +79,7 @@ u64 __init kaslr_early_init(u64 dt_phys) * and proceed with KASLR disabled. We will make another * attempt at mapping the FDT in setup_machine() */ - early_fixmap_init(); - fdt = fixmap_remap_fdt(dt_phys, &size, PAGE_KERNEL); + fdt = get_early_fdt_ptr(); if (!fdt) { kaslr_status = KASLR_DISABLED_FDT_REMAP; return 0; @@ -127,7 +94,7 @@ u64 __init kaslr_early_init(u64 dt_phys) * Check if 'nokaslr' appears on the command line, and * return 0 if that is the case. */ - if (is_kaslr_disabled_cmdline(fdt)) { + if (kaslr_feature_override.val & kaslr_feature_override.mask & 0xf) { kaslr_status = KASLR_DISABLED_CMDLINE; return 0; } diff --git a/arch/arm64/kernel/machine_kexec.c b/arch/arm64/kernel/machine_kexec.c index a0b144cfaea7..90a335c74442 100644 --- a/arch/arm64/kernel/machine_kexec.c +++ b/arch/arm64/kernel/machine_kexec.c @@ -42,6 +42,7 @@ static void _kexec_image_info(const char *func, int line, pr_debug(" start: %lx\n", kimage->start); pr_debug(" head: %lx\n", kimage->head); pr_debug(" nr_segments: %lu\n", kimage->nr_segments); + pr_debug(" kern_reloc: %pa\n", &kimage->arch.kern_reloc); for (i = 0; i < kimage->nr_segments; i++) { pr_debug(" segment[%lu]: %016lx - %016lx, 0x%lx bytes, %lu pages\n", @@ -58,6 +59,23 @@ void machine_kexec_cleanup(struct kimage *kimage) /* Empty routine needed to avoid build errors. */ } +int machine_kexec_post_load(struct kimage *kimage) +{ + void *reloc_code = page_to_virt(kimage->control_code_page); + + memcpy(reloc_code, arm64_relocate_new_kernel, + arm64_relocate_new_kernel_size); + kimage->arch.kern_reloc = __pa(reloc_code); + kexec_image_info(kimage); + + /* Flush the reloc_code in preparation for its execution. */ + __flush_dcache_area(reloc_code, arm64_relocate_new_kernel_size); + flush_icache_range((uintptr_t)reloc_code, (uintptr_t)reloc_code + + arm64_relocate_new_kernel_size); + + return 0; +} + /** * machine_kexec_prepare - Prepare for a kexec reboot. * @@ -67,8 +85,6 @@ void machine_kexec_cleanup(struct kimage *kimage) */ int machine_kexec_prepare(struct kimage *kimage) { - kexec_image_info(kimage); - if (kimage->type != KEXEC_TYPE_CRASH && cpus_are_stuck_in_kernel()) { pr_err("Can't kexec: CPUs are stuck in the kernel.\n"); return -EBUSY; @@ -143,8 +159,6 @@ static void kexec_segment_flush(const struct kimage *kimage) */ void machine_kexec(struct kimage *kimage) { - phys_addr_t reboot_code_buffer_phys; - void *reboot_code_buffer; bool in_kexec_crash = (kimage == kexec_crash_image); bool stuck_cpus = cpus_are_stuck_in_kernel(); @@ -155,31 +169,6 @@ void machine_kexec(struct kimage *kimage) WARN(in_kexec_crash && (stuck_cpus || smp_crash_stop_failed()), "Some CPUs may be stale, kdump will be unreliable.\n"); - reboot_code_buffer_phys = page_to_phys(kimage->control_code_page); - reboot_code_buffer = phys_to_virt(reboot_code_buffer_phys); - - kexec_image_info(kimage); - - /* - * Copy arm64_relocate_new_kernel to the reboot_code_buffer for use - * after the kernel is shut down. - */ - memcpy(reboot_code_buffer, arm64_relocate_new_kernel, - arm64_relocate_new_kernel_size); - - /* Flush the reboot_code_buffer in preparation for its execution. */ - __flush_dcache_area(reboot_code_buffer, arm64_relocate_new_kernel_size); - - /* - * Although we've killed off the secondary CPUs, we don't update - * the online mask if we're handling a crash kernel and consequently - * need to avoid flush_icache_range(), which will attempt to IPI - * the offline CPUs. Therefore, we must use the __* variant here. - */ - __flush_icache_range((uintptr_t)reboot_code_buffer, - (uintptr_t)reboot_code_buffer + - arm64_relocate_new_kernel_size); - /* Flush the kimage list and its buffers. */ kexec_list_flush(kimage); @@ -193,7 +182,7 @@ void machine_kexec(struct kimage *kimage) /* * cpu_soft_restart will shutdown the MMU, disable data caches, then - * transfer control to the reboot_code_buffer which contains a copy of + * transfer control to the kern_reloc which contains a copy of * the arm64_relocate_new_kernel routine. arm64_relocate_new_kernel * uses physical addressing to relocate the new image to its final * position and transfers control to the image entry point when the @@ -203,12 +192,8 @@ void machine_kexec(struct kimage *kimage) * userspace (kexec-tools). * In kexec_file case, the kernel starts directly without purgatory. */ - cpu_soft_restart(reboot_code_buffer_phys, kimage->head, kimage->start, -#ifdef CONFIG_KEXEC_FILE - kimage->arch.dtb_mem); -#else - 0); -#endif + cpu_soft_restart(kimage->arch.kern_reloc, kimage->head, kimage->start, + kimage->arch.dtb_mem); BUG(); /* Should never get here. */ } diff --git a/arch/arm64/kernel/machine_kexec_file.c b/arch/arm64/kernel/machine_kexec_file.c index 03210f644790..0cde47a63beb 100644 --- a/arch/arm64/kernel/machine_kexec_file.c +++ b/arch/arm64/kernel/machine_kexec_file.c @@ -182,8 +182,10 @@ static int create_dtb(struct kimage *image, /* duplicate a device tree blob */ ret = fdt_open_into(initial_boot_params, buf, buf_size); - if (ret) + if (ret) { + vfree(buf); return -EINVAL; + } ret = setup_dtb(image, initrd_load_addr, initrd_len, cmdline, buf); diff --git a/arch/arm64/kernel/module-plts.c b/arch/arm64/kernel/module-plts.c index 2e224435c024..e53493d8b208 100644 --- a/arch/arm64/kernel/module-plts.c +++ b/arch/arm64/kernel/module-plts.c @@ -131,7 +131,7 @@ u64 module_emit_veneer_for_adrp(struct module *mod, Elf64_Shdr *sechdrs, } #endif -#define cmp_3way(a,b) ((a) < (b) ? -1 : (a) > (b)) +#define cmp_3way(a, b) ((a) < (b) ? -1 : (a) > (b)) static int cmp_rela(const void *a, const void *b) { diff --git a/arch/arm64/kernel/mte.c b/arch/arm64/kernel/mte.c index 80b62fe49dcf..b3c70a612c7a 100644 --- a/arch/arm64/kernel/mte.c +++ b/arch/arm64/kernel/mte.c @@ -19,12 +19,13 @@ #include <asm/barrier.h> #include <asm/cpufeature.h> #include <asm/mte.h> -#include <asm/mte-kasan.h> #include <asm/ptrace.h> #include <asm/sysreg.h> u64 gcr_kernel_excl __ro_after_init; +static bool report_fault_once = true; + static void mte_sync_page_tags(struct page *page, pte_t *ptep, bool check_swap) { pte_t old_pte = READ_ONCE(*ptep); @@ -86,51 +87,6 @@ int memcmp_pages(struct page *page1, struct page *page2) return ret; } -u8 mte_get_mem_tag(void *addr) -{ - if (!system_supports_mte()) - return 0xFF; - - asm(__MTE_PREAMBLE "ldg %0, [%0]" - : "+r" (addr)); - - return mte_get_ptr_tag(addr); -} - -u8 mte_get_random_tag(void) -{ - void *addr; - - if (!system_supports_mte()) - return 0xFF; - - asm(__MTE_PREAMBLE "irg %0, %0" - : "+r" (addr)); - - return mte_get_ptr_tag(addr); -} - -void *mte_set_mem_tag_range(void *addr, size_t size, u8 tag) -{ - void *ptr = addr; - - if ((!system_supports_mte()) || (size == 0)) - return addr; - - /* Make sure that size is MTE granule aligned. */ - WARN_ON(size & (MTE_GRANULE_SIZE - 1)); - - /* Make sure that the address is MTE granule aligned. */ - WARN_ON((u64)addr & (MTE_GRANULE_SIZE - 1)); - - tag = 0xF0 | tag; - ptr = (void *)__tag_set(ptr, tag); - - mte_assign_mem_tag_range(ptr, size); - - return ptr; -} - void mte_init_tags(u64 max_tag) { static bool gcr_kernel_excl_initialized; @@ -158,6 +114,16 @@ void mte_enable_kernel(void) isb(); } +void mte_set_report_once(bool state) +{ + WRITE_ONCE(report_fault_once, state); +} + +bool mte_report_once(void) +{ + return READ_ONCE(report_fault_once); +} + static void update_sctlr_el1_tcf0(u64 tcf0) { /* ISB required for the kernel uaccess routines */ diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c index 3605f77ad4df..4658fcf88c2b 100644 --- a/arch/arm64/kernel/perf_event.c +++ b/arch/arm64/kernel/perf_event.c @@ -280,7 +280,7 @@ armv8pmu_event_attr_is_visible(struct kobject *kobj, return 0; } -static struct attribute_group armv8_pmuv3_events_attr_group = { +static const struct attribute_group armv8_pmuv3_events_attr_group = { .name = "events", .attrs = armv8_pmuv3_event_attrs, .is_visible = armv8pmu_event_attr_is_visible, @@ -300,7 +300,7 @@ static struct attribute *armv8_pmuv3_format_attrs[] = { NULL, }; -static struct attribute_group armv8_pmuv3_format_attr_group = { +static const struct attribute_group armv8_pmuv3_format_attr_group = { .name = "format", .attrs = armv8_pmuv3_format_attrs, }; @@ -322,7 +322,7 @@ static struct attribute *armv8_pmuv3_caps_attrs[] = { NULL, }; -static struct attribute_group armv8_pmuv3_caps_attr_group = { +static const struct attribute_group armv8_pmuv3_caps_attr_group = { .name = "caps", .attrs = armv8_pmuv3_caps_attrs, }; @@ -460,7 +460,7 @@ static inline int armv8pmu_counter_has_overflowed(u32 pmnc, int idx) return pmnc & BIT(ARMV8_IDX_TO_COUNTER(idx)); } -static inline u32 armv8pmu_read_evcntr(int idx) +static inline u64 armv8pmu_read_evcntr(int idx) { u32 counter = ARMV8_IDX_TO_COUNTER(idx); @@ -810,7 +810,7 @@ static int armv8pmu_get_single_idx(struct pmu_hw_events *cpuc, { int idx; - for (idx = ARMV8_IDX_COUNTER0; idx < cpu_pmu->num_events; idx ++) { + for (idx = ARMV8_IDX_COUNTER0; idx < cpu_pmu->num_events; idx++) { if (!test_and_set_bit(idx, cpuc->used_mask)) return idx; } @@ -1188,6 +1188,12 @@ static int armv8_a77_pmu_init(struct arm_pmu *cpu_pmu) armv8_pmuv3_map_event); } +static int armv8_a78_pmu_init(struct arm_pmu *cpu_pmu) +{ + return armv8_pmu_init_nogroups(cpu_pmu, "armv8_cortex_a78", + armv8_pmuv3_map_event); +} + static int armv8_e1_pmu_init(struct arm_pmu *cpu_pmu) { return armv8_pmu_init_nogroups(cpu_pmu, "armv8_neoverse_e1", @@ -1225,6 +1231,7 @@ static const struct of_device_id armv8_pmu_of_device_ids[] = { {.compatible = "arm,cortex-a75-pmu", .data = armv8_a75_pmu_init}, {.compatible = "arm,cortex-a76-pmu", .data = armv8_a76_pmu_init}, {.compatible = "arm,cortex-a77-pmu", .data = armv8_a77_pmu_init}, + {.compatible = "arm,cortex-a78-pmu", .data = armv8_a78_pmu_init}, {.compatible = "arm,neoverse-e1-pmu", .data = armv8_e1_pmu_init}, {.compatible = "arm,neoverse-n1-pmu", .data = armv8_n1_pmu_init}, {.compatible = "cavium,thunder-pmu", .data = armv8_thunder_pmu_init}, diff --git a/arch/arm64/kernel/probes/uprobes.c b/arch/arm64/kernel/probes/uprobes.c index a412d8edbcd2..2c247634552b 100644 --- a/arch/arm64/kernel/probes/uprobes.c +++ b/arch/arm64/kernel/probes/uprobes.c @@ -38,7 +38,7 @@ int arch_uprobe_analyze_insn(struct arch_uprobe *auprobe, struct mm_struct *mm, /* TODO: Currently we do not support AARCH32 instruction probing */ if (mm->context.flags & MMCF_AARCH32) - return -ENOTSUPP; + return -EOPNOTSUPP; else if (!IS_ALIGNED(addr, AARCH64_INSN_SIZE)) return -EINVAL; diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c index 6616486a58fe..325c83b1a24d 100644 --- a/arch/arm64/kernel/process.c +++ b/arch/arm64/kernel/process.c @@ -304,7 +304,7 @@ void __show_regs(struct pt_regs *regs) } } -void show_regs(struct pt_regs * regs) +void show_regs(struct pt_regs *regs) { __show_regs(regs); dump_backtrace(regs, NULL, KERN_DEFAULT); @@ -398,7 +398,7 @@ int copy_thread(unsigned long clone_flags, unsigned long stack_start, ptrauth_thread_init_kernel(p); - if (likely(!(p->flags & PF_KTHREAD))) { + if (likely(!(p->flags & (PF_KTHREAD | PF_IO_WORKER)))) { *childregs = *current_pt_regs(); childregs->regs[0] = 0; @@ -587,7 +587,7 @@ unsigned long get_wchan(struct task_struct *p) ret = frame.pc; goto out; } - } while (count ++ < 16); + } while (count++ < 16); out: put_task_stack(p); diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index 8ac487c84e37..170f42fd6101 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -194,6 +194,7 @@ static void ptrace_hbptriggered(struct perf_event *bp, } arm64_force_sig_ptrace_errno_trap(si_errno, bkpt->trigger, desc); + return; } #endif arm64_force_sig_fault(SIGTRAP, TRAP_HWBKPT, bkpt->trigger, desc); @@ -1796,7 +1797,7 @@ int syscall_trace_enter(struct pt_regs *regs) if (flags & (_TIF_SYSCALL_EMU | _TIF_SYSCALL_TRACE)) { tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER); - if (!in_syscall(regs) || (flags & _TIF_SYSCALL_EMU)) + if (flags & _TIF_SYSCALL_EMU) return NO_SYSCALL; } diff --git a/arch/arm64/kernel/relocate_kernel.S b/arch/arm64/kernel/relocate_kernel.S index 84eec95ec06c..b78ea5de97a4 100644 --- a/arch/arm64/kernel/relocate_kernel.S +++ b/arch/arm64/kernel/relocate_kernel.S @@ -17,28 +17,24 @@ /* * arm64_relocate_new_kernel - Put a 2nd stage image in place and boot it. * - * The memory that the old kernel occupies may be overwritten when coping the + * The memory that the old kernel occupies may be overwritten when copying the * new image to its final location. To assure that the * arm64_relocate_new_kernel routine which does that copy is not overwritten, * all code and data needed by arm64_relocate_new_kernel must be between the * symbols arm64_relocate_new_kernel and arm64_relocate_new_kernel_end. The * machine_kexec() routine will copy arm64_relocate_new_kernel to the kexec - * control_code_page, a special page which has been set up to be preserved - * during the copy operation. + * safe memory that has been set up to be preserved during the copy operation. */ SYM_CODE_START(arm64_relocate_new_kernel) - /* Setup the list loop variables. */ mov x18, x2 /* x18 = dtb address */ mov x17, x1 /* x17 = kimage_start */ mov x16, x0 /* x16 = kimage_head */ - raw_dcache_line_size x15, x0 /* x15 = dcache line size */ mov x14, xzr /* x14 = entry ptr */ mov x13, xzr /* x13 = copy dest */ - /* Check if the new image needs relocation. */ tbnz x16, IND_DONE_BIT, .Ldone - + raw_dcache_line_size x15, x1 /* x15 = dcache line size */ .Lloop: and x12, x16, PAGE_MASK /* x12 = addr */ @@ -47,44 +43,28 @@ SYM_CODE_START(arm64_relocate_new_kernel) tbz x16, IND_SOURCE_BIT, .Ltest_indirection /* Invalidate dest page to PoC. */ - mov x0, x13 - add x20, x0, #PAGE_SIZE + mov x2, x13 + add x20, x2, #PAGE_SIZE sub x1, x15, #1 - bic x0, x0, x1 -2: dc ivac, x0 - add x0, x0, x15 - cmp x0, x20 + bic x2, x2, x1 +2: dc ivac, x2 + add x2, x2, x15 + cmp x2, x20 b.lo 2b dsb sy - mov x20, x13 - mov x21, x12 - copy_page x20, x21, x0, x1, x2, x3, x4, x5, x6, x7 - - /* dest += PAGE_SIZE */ - add x13, x13, PAGE_SIZE + copy_page x13, x12, x1, x2, x3, x4, x5, x6, x7, x8 b .Lnext - .Ltest_indirection: tbz x16, IND_INDIRECTION_BIT, .Ltest_destination - - /* ptr = addr */ - mov x14, x12 + mov x14, x12 /* ptr = addr */ b .Lnext - .Ltest_destination: tbz x16, IND_DESTINATION_BIT, .Lnext - - /* dest = addr */ - mov x13, x12 - + mov x13, x12 /* dest = addr */ .Lnext: - /* entry = *ptr++ */ - ldr x16, [x14], #8 - - /* while (!(entry & DONE)) */ - tbz x16, IND_DONE_BIT, .Lloop - + ldr x16, [x14], #8 /* entry = *ptr++ */ + tbz x16, IND_DONE_BIT, .Lloop /* while (!(entry & DONE)) */ .Ldone: /* wait for writes from copy_page to finish */ dsb nsh diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c index c18aacde8bb0..61845c0821d9 100644 --- a/arch/arm64/kernel/setup.c +++ b/arch/arm64/kernel/setup.c @@ -168,6 +168,21 @@ static void __init smp_build_mpidr_hash(void) pr_warn("Large number of MPIDR hash buckets detected\n"); } +static void *early_fdt_ptr __initdata; + +void __init *get_early_fdt_ptr(void) +{ + return early_fdt_ptr; +} + +asmlinkage void __init early_fdt_map(u64 dt_phys) +{ + int fdt_size; + + early_fixmap_init(); + early_fdt_ptr = fixmap_remap_fdt(dt_phys, &fdt_size, PAGE_KERNEL); +} + static void __init setup_machine_fdt(phys_addr_t dt_phys) { int size; diff --git a/arch/arm64/kernel/sleep.S b/arch/arm64/kernel/sleep.S index 6bdef7362c0e..5bfd9b87f85d 100644 --- a/arch/arm64/kernel/sleep.S +++ b/arch/arm64/kernel/sleep.S @@ -100,6 +100,7 @@ SYM_FUNC_END(__cpu_suspend_enter) .pushsection ".idmap.text", "awx" SYM_CODE_START(cpu_resume) bl init_kernel_el + bl switch_to_vhe bl __cpu_setup /* enable the MMU early - so we can access sleep_save_stash by va */ adrp x1, swapper_pg_dir diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c index ad00f99ee9b0..357590beaabb 100644 --- a/arch/arm64/kernel/smp.c +++ b/arch/arm64/kernel/smp.c @@ -434,8 +434,10 @@ static void __init hyp_mode_check(void) "CPU: CPUs started in inconsistent modes"); else pr_info("CPU: All CPU(s) started at EL1\n"); - if (IS_ENABLED(CONFIG_KVM) && !is_kernel_in_hyp_mode()) + if (IS_ENABLED(CONFIG_KVM) && !is_kernel_in_hyp_mode()) { kvm_compute_layout(); + kvm_apply_hyp_relocations(); + } } void __init smp_cpus_done(unsigned int max_cpus) diff --git a/arch/arm64/kernel/stacktrace.c b/arch/arm64/kernel/stacktrace.c index fa56af1a59c3..ad20981dfda4 100644 --- a/arch/arm64/kernel/stacktrace.c +++ b/arch/arm64/kernel/stacktrace.c @@ -44,6 +44,10 @@ int notrace unwind_frame(struct task_struct *tsk, struct stackframe *frame) unsigned long fp = frame->fp; struct stack_info info; + /* Terminal record; nothing to unwind */ + if (!fp) + return -ENOENT; + if (fp & 0xf) return -EINVAL; @@ -104,15 +108,6 @@ int notrace unwind_frame(struct task_struct *tsk, struct stackframe *frame) frame->pc = ptrauth_strip_insn_pac(frame->pc); - /* - * Frames created upon entry from EL0 have NULL FP and PC values, so - * don't bother reporting these. Frames created by __noreturn functions - * might have a valid FP even if PC is bogus, so only terminate where - * both are NULL. - */ - if (!frame->fp && !frame->pc) - return -EINVAL; - return 0; } NOKPROBE_SYMBOL(unwind_frame); diff --git a/arch/arm64/kernel/suspend.c b/arch/arm64/kernel/suspend.c index a67b37a7a47e..d7564891ffe1 100644 --- a/arch/arm64/kernel/suspend.c +++ b/arch/arm64/kernel/suspend.c @@ -119,7 +119,7 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long)) if (!ret) ret = -EOPNOTSUPP; } else { - __cpu_suspend_exit(); + RCU_NONIDLE(__cpu_suspend_exit()); } unpause_graph_tracing(); diff --git a/arch/arm64/kernel/syscall.c b/arch/arm64/kernel/syscall.c index c2877c332f2d..b9cf12b271d7 100644 --- a/arch/arm64/kernel/syscall.c +++ b/arch/arm64/kernel/syscall.c @@ -65,35 +65,6 @@ static inline bool has_syscall_work(unsigned long flags) int syscall_trace_enter(struct pt_regs *regs); void syscall_trace_exit(struct pt_regs *regs); -#ifdef CONFIG_ARM64_ERRATUM_1463225 -DECLARE_PER_CPU(int, __in_cortex_a76_erratum_1463225_wa); - -static void cortex_a76_erratum_1463225_svc_handler(void) -{ - u32 reg, val; - - if (!unlikely(test_thread_flag(TIF_SINGLESTEP))) - return; - - if (!unlikely(this_cpu_has_cap(ARM64_WORKAROUND_1463225))) - return; - - __this_cpu_write(__in_cortex_a76_erratum_1463225_wa, 1); - reg = read_sysreg(mdscr_el1); - val = reg | DBG_MDSCR_SS | DBG_MDSCR_KDE; - write_sysreg(val, mdscr_el1); - asm volatile("msr daifclr, #8"); - isb(); - - /* We will have taken a single-step exception by this point */ - - write_sysreg(reg, mdscr_el1); - __this_cpu_write(__in_cortex_a76_erratum_1463225_wa, 0); -} -#else -static void cortex_a76_erratum_1463225_svc_handler(void) { } -#endif /* CONFIG_ARM64_ERRATUM_1463225 */ - static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr, const syscall_fn_t syscall_table[]) { @@ -120,7 +91,6 @@ static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr, * (Similarly for HVC and SMC elsewhere.) */ - cortex_a76_erratum_1463225_svc_handler(); local_daif_restore(DAIF_PROCCTX); if (flags & _TIF_MTE_ASYNC_FAULT) { diff --git a/arch/arm64/kernel/topology.c b/arch/arm64/kernel/topology.c index f6faa697e83e..e08a4126453a 100644 --- a/arch/arm64/kernel/topology.c +++ b/arch/arm64/kernel/topology.c @@ -199,76 +199,38 @@ static int freq_inv_set_max_ratio(int cpu, u64 max_rate, u64 ref_rate) return 0; } -static inline bool -enable_policy_freq_counters(int cpu, cpumask_var_t valid_cpus) -{ - struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); - - if (!policy) { - pr_debug("CPU%d: No cpufreq policy found.\n", cpu); - return false; - } - - if (cpumask_subset(policy->related_cpus, valid_cpus)) - cpumask_or(amu_fie_cpus, policy->related_cpus, - amu_fie_cpus); - - cpufreq_cpu_put(policy); - - return true; -} - static DEFINE_STATIC_KEY_FALSE(amu_fie_key); #define amu_freq_invariant() static_branch_unlikely(&amu_fie_key) -static int __init init_amu_fie(void) +static void amu_fie_setup(const struct cpumask *cpus) { - bool invariance_status = topology_scale_freq_invariant(); - cpumask_var_t valid_cpus; - bool have_policy = false; - int ret = 0; + bool invariant; int cpu; - if (!zalloc_cpumask_var(&valid_cpus, GFP_KERNEL)) - return -ENOMEM; - - if (!zalloc_cpumask_var(&amu_fie_cpus, GFP_KERNEL)) { - ret = -ENOMEM; - goto free_valid_mask; - } + /* We are already set since the last insmod of cpufreq driver */ + if (unlikely(cpumask_subset(cpus, amu_fie_cpus))) + return; - for_each_present_cpu(cpu) { + for_each_cpu(cpu, cpus) { if (!freq_counters_valid(cpu) || freq_inv_set_max_ratio(cpu, cpufreq_get_hw_max_freq(cpu) * 1000, arch_timer_get_rate())) - continue; - - cpumask_set_cpu(cpu, valid_cpus); - have_policy |= enable_policy_freq_counters(cpu, valid_cpus); + return; } - /* - * If we are not restricted by cpufreq policies, we only enable - * the use of the AMU feature for FIE if all CPUs support AMU. - * Otherwise, enable_policy_freq_counters has already enabled - * policy cpus. - */ - if (!have_policy && cpumask_equal(valid_cpus, cpu_present_mask)) - cpumask_or(amu_fie_cpus, amu_fie_cpus, valid_cpus); + cpumask_or(amu_fie_cpus, amu_fie_cpus, cpus); - if (!cpumask_empty(amu_fie_cpus)) { - pr_info("CPUs[%*pbl]: counters will be used for FIE.", - cpumask_pr_args(amu_fie_cpus)); - static_branch_enable(&amu_fie_key); - } + invariant = topology_scale_freq_invariant(); - /* - * If the system is not fully invariant after AMU init, disable - * partial use of counters for frequency invariance. - */ - if (!topology_scale_freq_invariant()) - static_branch_disable(&amu_fie_key); + /* We aren't fully invariant yet */ + if (!invariant && !cpumask_equal(amu_fie_cpus, cpu_present_mask)) + return; + + static_branch_enable(&amu_fie_key); + + pr_debug("CPUs[%*pbl]: counters will be used for FIE.", + cpumask_pr_args(cpus)); /* * Task scheduler behavior depends on frequency invariance support, @@ -276,15 +238,50 @@ static int __init init_amu_fie(void) * a result of counter initialisation and use, retrigger the build of * scheduling domains to ensure the information is propagated properly. */ - if (invariance_status != topology_scale_freq_invariant()) + if (!invariant) rebuild_sched_domains_energy(); +} + +static int init_amu_fie_callback(struct notifier_block *nb, unsigned long val, + void *data) +{ + struct cpufreq_policy *policy = data; + + if (val == CPUFREQ_CREATE_POLICY) + amu_fie_setup(policy->related_cpus); + + /* + * We don't need to handle CPUFREQ_REMOVE_POLICY event as the AMU + * counters don't have any dependency on cpufreq driver once we have + * initialized AMU support and enabled invariance. The AMU counters will + * keep on working just fine in the absence of the cpufreq driver, and + * for the CPUs for which there are no counters available, the last set + * value of freq_scale will remain valid as that is the frequency those + * CPUs are running at. + */ + + return 0; +} + +static struct notifier_block init_amu_fie_notifier = { + .notifier_call = init_amu_fie_callback, +}; + +static int __init init_amu_fie(void) +{ + int ret; + + if (!zalloc_cpumask_var(&amu_fie_cpus, GFP_KERNEL)) + return -ENOMEM; -free_valid_mask: - free_cpumask_var(valid_cpus); + ret = cpufreq_register_notifier(&init_amu_fie_notifier, + CPUFREQ_POLICY_NOTIFIER); + if (ret) + free_cpumask_var(amu_fie_cpus); return ret; } -late_initcall_sync(init_amu_fie); +core_initcall(init_amu_fie); bool arch_freq_counters_available(const struct cpumask *cpus) { diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c index 6895ce777e7f..a05d34f0e82a 100644 --- a/arch/arm64/kernel/traps.c +++ b/arch/arm64/kernel/traps.c @@ -45,7 +45,7 @@ #include <asm/system_misc.h> #include <asm/sysreg.h> -static const char *handler[]= { +static const char *handler[] = { "Synchronous Abort", "IRQ", "FIQ", diff --git a/arch/arm64/kernel/vdso/vdso.S b/arch/arm64/kernel/vdso-wrap.S index c4b1990bf2be..c4b1990bf2be 100644 --- a/arch/arm64/kernel/vdso/vdso.S +++ b/arch/arm64/kernel/vdso-wrap.S diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile index cd9c3fa25902..945e6bb326e3 100644 --- a/arch/arm64/kernel/vdso/Makefile +++ b/arch/arm64/kernel/vdso/Makefile @@ -29,7 +29,8 @@ ldflags-y := -shared -nostdlib -soname=linux-vdso.so.1 --hash-style=sysv \ ccflags-y := -fno-common -fno-builtin -fno-stack-protector -ffixed-x18 ccflags-y += -DDISABLE_BRANCH_PROFILING -DBUILD_VDSO -CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os $(CC_FLAGS_SCS) $(GCC_PLUGINS_CFLAGS) +CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os $(CC_FLAGS_SCS) $(GCC_PLUGINS_CFLAGS) \ + $(CC_FLAGS_LTO) KASAN_SANITIZE := n UBSAN_SANITIZE := n OBJECT_FILES_NON_STANDARD := y @@ -44,7 +45,6 @@ endif # Disable gcov profiling for VDSO code GCOV_PROFILE := n -obj-y += vdso.o targets += vdso.lds CPPFLAGS_vdso.lds += -P -C -U$(ARCH) diff --git a/arch/arm64/kernel/vdso/gen_vdso_offsets.sh b/arch/arm64/kernel/vdso/gen_vdso_offsets.sh index 8b806eacd0a6..0387209d65b1 100755 --- a/arch/arm64/kernel/vdso/gen_vdso_offsets.sh +++ b/arch/arm64/kernel/vdso/gen_vdso_offsets.sh @@ -13,4 +13,4 @@ LC_ALL=C sed -n -e 's/^00*/0/' -e \ -'s/^\([0-9a-fA-F]*\) . VDSO_\([a-zA-Z0-9_]*\)$/\#define vdso_offset_\2\t0x\1/p' +'s/^\([0-9a-fA-F]*\) . VDSO_\([a-zA-Z0-9_]*\)$/\#define vdso_offset_\2 0x\1/p' diff --git a/arch/arm64/kernel/vdso32/vdso.S b/arch/arm64/kernel/vdso32-wrap.S index e72ac7bc4c04..e72ac7bc4c04 100644 --- a/arch/arm64/kernel/vdso32/vdso.S +++ b/arch/arm64/kernel/vdso32-wrap.S diff --git a/arch/arm64/kernel/vdso32/Makefile b/arch/arm64/kernel/vdso32/Makefile index a1e0f91e6cea..789ad420f16b 100644 --- a/arch/arm64/kernel/vdso32/Makefile +++ b/arch/arm64/kernel/vdso32/Makefile @@ -155,7 +155,6 @@ c-obj-vdso-gettimeofday := $(addprefix $(obj)/, $(c-obj-vdso-gettimeofday)) asm-obj-vdso := $(addprefix $(obj)/, $(asm-obj-vdso)) obj-vdso := $(c-obj-vdso) $(c-obj-vdso-gettimeofday) $(asm-obj-vdso) -obj-y += vdso.o targets += vdso.lds CPPFLAGS_vdso.lds += -P -C -U$(ARCH) diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S index 4c0b0c89ad59..7eea7888bb02 100644 --- a/arch/arm64/kernel/vmlinux.lds.S +++ b/arch/arm64/kernel/vmlinux.lds.S @@ -31,10 +31,11 @@ jiffies = jiffies_64; __stop___kvm_ex_table = .; #define HYPERVISOR_DATA_SECTIONS \ - HYP_SECTION_NAME(.data..ro_after_init) : { \ - __hyp_data_ro_after_init_start = .; \ + HYP_SECTION_NAME(.rodata) : { \ + __hyp_rodata_start = .; \ *(HYP_SECTION_NAME(.data..ro_after_init)) \ - __hyp_data_ro_after_init_end = .; \ + *(HYP_SECTION_NAME(.rodata)) \ + __hyp_rodata_end = .; \ } #define HYPERVISOR_PERCPU_SECTION \ @@ -42,10 +43,19 @@ jiffies = jiffies_64; HYP_SECTION_NAME(.data..percpu) : { \ *(HYP_SECTION_NAME(.data..percpu)) \ } + +#define HYPERVISOR_RELOC_SECTION \ + .hyp.reloc : ALIGN(4) { \ + __hyp_reloc_begin = .; \ + *(.hyp.reloc) \ + __hyp_reloc_end = .; \ + } + #else /* CONFIG_KVM */ #define HYPERVISOR_EXTABLE #define HYPERVISOR_DATA_SECTIONS #define HYPERVISOR_PERCPU_SECTION +#define HYPERVISOR_RELOC_SECTION #endif #define HYPERVISOR_TEXT \ @@ -216,6 +226,8 @@ SECTIONS PERCPU_SECTION(L1_CACHE_BYTES) HYPERVISOR_PERCPU_SECTION + HYPERVISOR_RELOC_SECTION + .rela.dyn : ALIGN(8) { *(.rela .rela*) } @@ -316,3 +328,11 @@ ASSERT((__entry_tramp_text_end - __entry_tramp_text_start) == PAGE_SIZE, * If padding is applied before .head.text, virt<->phys conversions will fail. */ ASSERT(_text == KIMAGE_VADDR, "HEAD is misaligned") + +ASSERT(swapper_pg_dir - reserved_pg_dir == RESERVED_SWAPPER_OFFSET, + "RESERVED_SWAPPER_OFFSET is wrong!") + +#ifdef CONFIG_UNMAP_KERNEL_AT_EL0 +ASSERT(swapper_pg_dir - tramp_pg_dir == TRAMP_SWAPPER_OFFSET, + "TRAMP_SWAPPER_OFFSET is wrong!") +#endif diff --git a/arch/arm64/kvm/Makefile b/arch/arm64/kvm/Makefile index 13b017284bf9..589921392cb1 100644 --- a/arch/arm64/kvm/Makefile +++ b/arch/arm64/kvm/Makefile @@ -16,7 +16,7 @@ kvm-y := $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o $(KVM)/eventfd.o \ inject_fault.o va_layout.o handle_exit.o \ guest.o debug.o reset.o sys_regs.o \ vgic-sys-reg-v3.o fpsimd.o pmu.o \ - arch_timer.o \ + arch_timer.o trng.o\ vgic/vgic.o vgic/vgic-init.o \ vgic/vgic-irqfd.o vgic/vgic-v2.o \ vgic/vgic-v3.o vgic/vgic-v4.o \ diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c index fe60d25c000e..7f06ba76698d 100644 --- a/arch/arm64/kvm/arm.c +++ b/arch/arm64/kvm/arm.c @@ -385,11 +385,16 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) last_ran = this_cpu_ptr(mmu->last_vcpu_ran); /* + * We guarantee that both TLBs and I-cache are private to each + * vcpu. If detecting that a vcpu from the same VM has + * previously run on the same physical CPU, call into the + * hypervisor code to nuke the relevant contexts. + * * We might get preempted before the vCPU actually runs, but * over-invalidation doesn't affect correctness. */ if (*last_ran != vcpu->vcpu_id) { - kvm_call_hyp(__kvm_tlb_flush_local_vmid, mmu); + kvm_call_hyp(__kvm_flush_cpu_context, mmu); *last_ran = vcpu->vcpu_id; } @@ -1750,11 +1755,10 @@ static int init_hyp_mode(void) goto out_err; } - err = create_hyp_mappings(kvm_ksym_ref(__hyp_data_ro_after_init_start), - kvm_ksym_ref(__hyp_data_ro_after_init_end), - PAGE_HYP_RO); + err = create_hyp_mappings(kvm_ksym_ref(__hyp_rodata_start), + kvm_ksym_ref(__hyp_rodata_end), PAGE_HYP_RO); if (err) { - kvm_err("Cannot map .hyp.data..ro_after_init section\n"); + kvm_err("Cannot map .hyp.rodata section\n"); goto out_err; } @@ -1967,6 +1971,9 @@ static int __init early_kvm_mode_cfg(char *arg) return 0; } + if (strcmp(arg, "nvhe") == 0 && !WARN_ON(is_kernel_in_hyp_mode())) + return 0; + return -EINVAL; } early_param("kvm-arm.mode", early_kvm_mode_cfg); diff --git a/arch/arm64/kvm/hyp/entry.S b/arch/arm64/kvm/hyp/entry.S index b0afad7a99c6..e831d3dfd50d 100644 --- a/arch/arm64/kvm/hyp/entry.S +++ b/arch/arm64/kvm/hyp/entry.S @@ -85,8 +85,10 @@ SYM_INNER_LABEL(__guest_exit_panic, SYM_L_GLOBAL) // If the hyp context is loaded, go straight to hyp_panic get_loaded_vcpu x0, x1 - cbz x0, hyp_panic + cbnz x0, 1f + b hyp_panic +1: // The hyp context is saved so make sure it is restored to allow // hyp_panic to run at hyp and, subsequently, panic to run in the host. // This makes use of __guest_exit to avoid duplication but sets the @@ -94,7 +96,7 @@ SYM_INNER_LABEL(__guest_exit_panic, SYM_L_GLOBAL) // current state is saved to the guest context but it will only be // accurate if the guest had been completely restored. adr_this_cpu x0, kvm_hyp_ctxt, x1 - adr x1, hyp_panic + adr_l x1, hyp_panic str x1, [x0, #CPU_XREG_OFFSET(30)] get_vcpu_ptr x1, x0 @@ -146,7 +148,7 @@ SYM_INNER_LABEL(__guest_exit, SYM_L_GLOBAL) // Now restore the hyp regs restore_callee_saved_regs x2 - set_loaded_vcpu xzr, x1, x2 + set_loaded_vcpu xzr, x2, x3 alternative_if ARM64_HAS_RAS_EXTN // If we have the RAS extensions we can consume a pending error diff --git a/arch/arm64/kvm/hyp/hyp-entry.S b/arch/arm64/kvm/hyp/hyp-entry.S index d179056e1af8..5f49df4ffdd8 100644 --- a/arch/arm64/kvm/hyp/hyp-entry.S +++ b/arch/arm64/kvm/hyp/hyp-entry.S @@ -119,7 +119,7 @@ el2_error: .macro invalid_vector label, target = __guest_exit_panic .align 2 -SYM_CODE_START(\label) +SYM_CODE_START_LOCAL(\label) b \target SYM_CODE_END(\label) .endm diff --git a/arch/arm64/kvm/hyp/include/hyp/switch.h b/arch/arm64/kvm/hyp/include/hyp/switch.h index 84473574c2e7..6c1f51f25eb3 100644 --- a/arch/arm64/kvm/hyp/include/hyp/switch.h +++ b/arch/arm64/kvm/hyp/include/hyp/switch.h @@ -90,15 +90,18 @@ static inline void __activate_traps_common(struct kvm_vcpu *vcpu) * counter, which could make a PMXEVCNTR_EL0 access UNDEF at * EL1 instead of being trapped to EL2. */ - write_sysreg(0, pmselr_el0); - write_sysreg(ARMV8_PMU_USERENR_MASK, pmuserenr_el0); + if (kvm_arm_support_pmu_v3()) { + write_sysreg(0, pmselr_el0); + write_sysreg(ARMV8_PMU_USERENR_MASK, pmuserenr_el0); + } write_sysreg(vcpu->arch.mdcr_el2, mdcr_el2); } static inline void __deactivate_traps_common(void) { write_sysreg(0, hstr_el2); - write_sysreg(0, pmuserenr_el0); + if (kvm_arm_support_pmu_v3()) + write_sysreg(0, pmuserenr_el0); } static inline void ___activate_traps(struct kvm_vcpu *vcpu) @@ -505,8 +508,8 @@ static inline void __kvm_unexpected_el2_exception(void) struct exception_table_entry *entry, *end; unsigned long elr_el2 = read_sysreg(elr_el2); - entry = hyp_symbol_addr(__start___kvm_ex_table); - end = hyp_symbol_addr(__stop___kvm_ex_table); + entry = &__start___kvm_ex_table; + end = &__stop___kvm_ex_table; while (entry < end) { addr = (unsigned long)&entry->insn + entry->insn; diff --git a/arch/arm64/kvm/hyp/nvhe/.gitignore b/arch/arm64/kvm/hyp/nvhe/.gitignore index 695d73d0249e..5b6c43cc96f8 100644 --- a/arch/arm64/kvm/hyp/nvhe/.gitignore +++ b/arch/arm64/kvm/hyp/nvhe/.gitignore @@ -1,2 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only +gen-hyprel hyp.lds +hyp-reloc.S diff --git a/arch/arm64/kvm/hyp/nvhe/Makefile b/arch/arm64/kvm/hyp/nvhe/Makefile index 1f1e351c5fe2..a6707df4f6c0 100644 --- a/arch/arm64/kvm/hyp/nvhe/Makefile +++ b/arch/arm64/kvm/hyp/nvhe/Makefile @@ -3,8 +3,11 @@ # Makefile for Kernel-based Virtual Machine module, HYP/nVHE part # -asflags-y := -D__KVM_NVHE_HYPERVISOR__ -ccflags-y := -D__KVM_NVHE_HYPERVISOR__ +asflags-y := -D__KVM_NVHE_HYPERVISOR__ -D__DISABLE_EXPORTS +ccflags-y := -D__KVM_NVHE_HYPERVISOR__ -D__DISABLE_EXPORTS + +hostprogs := gen-hyprel +HOST_EXTRACFLAGS += -I$(objtree)/include obj-y := timer-sr.o sysreg-sr.o debug-sr.o switch.o tlb.o hyp-init.o host.o \ hyp-main.o hyp-smp.o psci-relay.o @@ -19,7 +22,7 @@ obj-y += ../vgic-v3-sr.o ../aarch32.o ../vgic-v2-cpuif-proxy.o ../entry.o \ hyp-obj := $(patsubst %.o,%.nvhe.o,$(obj-y)) obj-y := kvm_nvhe.o -extra-y := $(hyp-obj) kvm_nvhe.tmp.o hyp.lds +extra-y := $(hyp-obj) kvm_nvhe.tmp.o kvm_nvhe.rel.o hyp.lds hyp-reloc.S hyp-reloc.o # 1) Compile all source files to `.nvhe.o` object files. The file extension # avoids file name clashes for files shared with VHE. @@ -42,11 +45,31 @@ LDFLAGS_kvm_nvhe.tmp.o := -r -T $(obj)/kvm_nvhe.tmp.o: $(obj)/hyp.lds $(addprefix $(obj)/,$(hyp-obj)) FORCE $(call if_changed,ld) -# 4) Produce the final 'kvm_nvhe.o', ready to be linked into 'vmlinux'. +# 4) Generate list of hyp code/data positions that need to be relocated at +# runtime. Because the hypervisor is part of the kernel binary, relocations +# produce a kernel VA. We enumerate relocations targeting hyp at build time +# and convert the kernel VAs at those positions to hyp VAs. +$(obj)/hyp-reloc.S: $(obj)/kvm_nvhe.tmp.o $(obj)/gen-hyprel + $(call if_changed,hyprel) + +# 5) Compile hyp-reloc.S and link it into the existing partially linked object. +# The object file now contains a section with pointers to hyp positions that +# will contain kernel VAs at runtime. These pointers have relocations on them +# so that they get updated as the hyp object is linked into `vmlinux`. +LDFLAGS_kvm_nvhe.rel.o := -r +$(obj)/kvm_nvhe.rel.o: $(obj)/kvm_nvhe.tmp.o $(obj)/hyp-reloc.o FORCE + $(call if_changed,ld) + +# 6) Produce the final 'kvm_nvhe.o', ready to be linked into 'vmlinux'. # Prefixes names of ELF symbols with '__kvm_nvhe_'. -$(obj)/kvm_nvhe.o: $(obj)/kvm_nvhe.tmp.o FORCE +$(obj)/kvm_nvhe.o: $(obj)/kvm_nvhe.rel.o FORCE $(call if_changed,hypcopy) +# The HYPREL command calls `gen-hyprel` to generate an assembly file with +# a list of relocations targeting hyp code/data. +quiet_cmd_hyprel = HYPREL $@ + cmd_hyprel = $(obj)/gen-hyprel $< > $@ + # The HYPCOPY command uses `objcopy` to prefix all ELF symbol names # to avoid clashes with VHE code/data. quiet_cmd_hypcopy = HYPCOPY $@ diff --git a/arch/arm64/kvm/hyp/nvhe/debug-sr.c b/arch/arm64/kvm/hyp/nvhe/debug-sr.c index 91a711aa8382..f401724f12ef 100644 --- a/arch/arm64/kvm/hyp/nvhe/debug-sr.c +++ b/arch/arm64/kvm/hyp/nvhe/debug-sr.c @@ -58,16 +58,24 @@ static void __debug_restore_spe(u64 pmscr_el1) write_sysreg_s(pmscr_el1, SYS_PMSCR_EL1); } -void __debug_switch_to_guest(struct kvm_vcpu *vcpu) +void __debug_save_host_buffers_nvhe(struct kvm_vcpu *vcpu) { /* Disable and flush SPE data generation */ __debug_save_spe(&vcpu->arch.host_debug_state.pmscr_el1); +} + +void __debug_switch_to_guest(struct kvm_vcpu *vcpu) +{ __debug_switch_to_guest_common(vcpu); } -void __debug_switch_to_host(struct kvm_vcpu *vcpu) +void __debug_restore_host_buffers_nvhe(struct kvm_vcpu *vcpu) { __debug_restore_spe(vcpu->arch.host_debug_state.pmscr_el1); +} + +void __debug_switch_to_host(struct kvm_vcpu *vcpu) +{ __debug_switch_to_host_common(vcpu); } diff --git a/arch/arm64/kvm/hyp/nvhe/gen-hyprel.c b/arch/arm64/kvm/hyp/nvhe/gen-hyprel.c new file mode 100644 index 000000000000..ead02c6a7628 --- /dev/null +++ b/arch/arm64/kvm/hyp/nvhe/gen-hyprel.c @@ -0,0 +1,438 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2020 - Google LLC + * Author: David Brazdil <dbrazdil@google.com> + * + * Generates relocation information used by the kernel to convert + * absolute addresses in hyp data from kernel VAs to hyp VAs. + * + * This is necessary because hyp code is linked into the same binary + * as the kernel but executes under different memory mappings. + * If the compiler used absolute addressing, those addresses need to + * be converted before they are used by hyp code. + * + * The input of this program is the relocatable ELF object containing + * all hyp code/data, not yet linked into vmlinux. Hyp section names + * should have been prefixed with `.hyp` at this point. + * + * The output (printed to stdout) is an assembly file containing + * an array of 32-bit integers and static relocations that instruct + * the linker of `vmlinux` to populate the array entries with offsets + * to positions in the kernel binary containing VAs used by hyp code. + * + * Note that dynamic relocations could be used for the same purpose. + * However, those are only generated if CONFIG_RELOCATABLE=y. + */ + +#include <elf.h> +#include <endian.h> +#include <errno.h> +#include <fcntl.h> +#include <stdbool.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <sys/mman.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <unistd.h> + +#include <generated/autoconf.h> + +#define HYP_SECTION_PREFIX ".hyp" +#define HYP_RELOC_SECTION ".hyp.reloc" +#define HYP_SECTION_SYMBOL_PREFIX "__hyp_section_" + +/* + * AArch64 relocation type constants. + * Included in case these are not defined in the host toolchain. + */ +#ifndef R_AARCH64_ABS64 +#define R_AARCH64_ABS64 257 +#endif +#ifndef R_AARCH64_LD_PREL_LO19 +#define R_AARCH64_LD_PREL_LO19 273 +#endif +#ifndef R_AARCH64_ADR_PREL_LO21 +#define R_AARCH64_ADR_PREL_LO21 274 +#endif +#ifndef R_AARCH64_ADR_PREL_PG_HI21 +#define R_AARCH64_ADR_PREL_PG_HI21 275 +#endif +#ifndef R_AARCH64_ADR_PREL_PG_HI21_NC +#define R_AARCH64_ADR_PREL_PG_HI21_NC 276 +#endif +#ifndef R_AARCH64_ADD_ABS_LO12_NC +#define R_AARCH64_ADD_ABS_LO12_NC 277 +#endif +#ifndef R_AARCH64_LDST8_ABS_LO12_NC +#define R_AARCH64_LDST8_ABS_LO12_NC 278 +#endif +#ifndef R_AARCH64_TSTBR14 +#define R_AARCH64_TSTBR14 279 +#endif +#ifndef R_AARCH64_CONDBR19 +#define R_AARCH64_CONDBR19 280 +#endif +#ifndef R_AARCH64_JUMP26 +#define R_AARCH64_JUMP26 282 +#endif +#ifndef R_AARCH64_CALL26 +#define R_AARCH64_CALL26 283 +#endif +#ifndef R_AARCH64_LDST16_ABS_LO12_NC +#define R_AARCH64_LDST16_ABS_LO12_NC 284 +#endif +#ifndef R_AARCH64_LDST32_ABS_LO12_NC +#define R_AARCH64_LDST32_ABS_LO12_NC 285 +#endif +#ifndef R_AARCH64_LDST64_ABS_LO12_NC +#define R_AARCH64_LDST64_ABS_LO12_NC 286 +#endif +#ifndef R_AARCH64_MOVW_PREL_G0 +#define R_AARCH64_MOVW_PREL_G0 287 +#endif +#ifndef R_AARCH64_MOVW_PREL_G0_NC +#define R_AARCH64_MOVW_PREL_G0_NC 288 +#endif +#ifndef R_AARCH64_MOVW_PREL_G1 +#define R_AARCH64_MOVW_PREL_G1 289 +#endif +#ifndef R_AARCH64_MOVW_PREL_G1_NC +#define R_AARCH64_MOVW_PREL_G1_NC 290 +#endif +#ifndef R_AARCH64_MOVW_PREL_G2 +#define R_AARCH64_MOVW_PREL_G2 291 +#endif +#ifndef R_AARCH64_MOVW_PREL_G2_NC +#define R_AARCH64_MOVW_PREL_G2_NC 292 +#endif +#ifndef R_AARCH64_MOVW_PREL_G3 +#define R_AARCH64_MOVW_PREL_G3 293 +#endif +#ifndef R_AARCH64_LDST128_ABS_LO12_NC +#define R_AARCH64_LDST128_ABS_LO12_NC 299 +#endif + +/* Global state of the processed ELF. */ +static struct { + const char *path; + char *begin; + size_t size; + Elf64_Ehdr *ehdr; + Elf64_Shdr *sh_table; + const char *sh_string; +} elf; + +#if defined(CONFIG_CPU_LITTLE_ENDIAN) + +#define elf16toh(x) le16toh(x) +#define elf32toh(x) le32toh(x) +#define elf64toh(x) le64toh(x) + +#define ELFENDIAN ELFDATA2LSB + +#elif defined(CONFIG_CPU_BIG_ENDIAN) + +#define elf16toh(x) be16toh(x) +#define elf32toh(x) be32toh(x) +#define elf64toh(x) be64toh(x) + +#define ELFENDIAN ELFDATA2MSB + +#else + +#error PDP-endian sadly unsupported... + +#endif + +#define fatal_error(fmt, ...) \ + ({ \ + fprintf(stderr, "error: %s: " fmt "\n", \ + elf.path, ## __VA_ARGS__); \ + exit(EXIT_FAILURE); \ + __builtin_unreachable(); \ + }) + +#define fatal_perror(msg) \ + ({ \ + fprintf(stderr, "error: %s: " msg ": %s\n", \ + elf.path, strerror(errno)); \ + exit(EXIT_FAILURE); \ + __builtin_unreachable(); \ + }) + +#define assert_op(lhs, rhs, fmt, op) \ + ({ \ + typeof(lhs) _lhs = (lhs); \ + typeof(rhs) _rhs = (rhs); \ + \ + if (!(_lhs op _rhs)) { \ + fatal_error("assertion " #lhs " " #op " " #rhs \ + " failed (lhs=" fmt ", rhs=" fmt \ + ", line=%d)", _lhs, _rhs, __LINE__); \ + } \ + }) + +#define assert_eq(lhs, rhs, fmt) assert_op(lhs, rhs, fmt, ==) +#define assert_ne(lhs, rhs, fmt) assert_op(lhs, rhs, fmt, !=) +#define assert_lt(lhs, rhs, fmt) assert_op(lhs, rhs, fmt, <) +#define assert_ge(lhs, rhs, fmt) assert_op(lhs, rhs, fmt, >=) + +/* + * Return a pointer of a given type at a given offset from + * the beginning of the ELF file. + */ +#define elf_ptr(type, off) ((type *)(elf.begin + (off))) + +/* Iterate over all sections in the ELF. */ +#define for_each_section(var) \ + for (var = elf.sh_table; var < elf.sh_table + elf16toh(elf.ehdr->e_shnum); ++var) + +/* Iterate over all Elf64_Rela relocations in a given section. */ +#define for_each_rela(shdr, var) \ + for (var = elf_ptr(Elf64_Rela, elf64toh(shdr->sh_offset)); \ + var < elf_ptr(Elf64_Rela, elf64toh(shdr->sh_offset) + elf64toh(shdr->sh_size)); var++) + +/* True if a string starts with a given prefix. */ +static inline bool starts_with(const char *str, const char *prefix) +{ + return memcmp(str, prefix, strlen(prefix)) == 0; +} + +/* Returns a string containing the name of a given section. */ +static inline const char *section_name(Elf64_Shdr *shdr) +{ + return elf.sh_string + elf32toh(shdr->sh_name); +} + +/* Returns a pointer to the first byte of section data. */ +static inline const char *section_begin(Elf64_Shdr *shdr) +{ + return elf_ptr(char, elf64toh(shdr->sh_offset)); +} + +/* Find a section by its offset from the beginning of the file. */ +static inline Elf64_Shdr *section_by_off(Elf64_Off off) +{ + assert_ne(off, 0UL, "%lu"); + return elf_ptr(Elf64_Shdr, off); +} + +/* Find a section by its index. */ +static inline Elf64_Shdr *section_by_idx(uint16_t idx) +{ + assert_ne(idx, SHN_UNDEF, "%u"); + return &elf.sh_table[idx]; +} + +/* + * Memory-map the given ELF file, perform sanity checks, and + * populate global state. + */ +static void init_elf(const char *path) +{ + int fd, ret; + struct stat stat; + + /* Store path in the global struct for error printing. */ + elf.path = path; + + /* Open the ELF file. */ + fd = open(path, O_RDONLY); + if (fd < 0) + fatal_perror("Could not open ELF file"); + + /* Get status of ELF file to obtain its size. */ + ret = fstat(fd, &stat); + if (ret < 0) { + close(fd); + fatal_perror("Could not get status of ELF file"); + } + + /* mmap() the entire ELF file read-only at an arbitrary address. */ + elf.begin = mmap(0, stat.st_size, PROT_READ, MAP_PRIVATE, fd, 0); + if (elf.begin == MAP_FAILED) { + close(fd); + fatal_perror("Could not mmap ELF file"); + } + + /* mmap() was successful, close the FD. */ + close(fd); + + /* Get pointer to the ELF header. */ + assert_ge(stat.st_size, sizeof(*elf.ehdr), "%lu"); + elf.ehdr = elf_ptr(Elf64_Ehdr, 0); + + /* Check the ELF magic. */ + assert_eq(elf.ehdr->e_ident[EI_MAG0], ELFMAG0, "0x%x"); + assert_eq(elf.ehdr->e_ident[EI_MAG1], ELFMAG1, "0x%x"); + assert_eq(elf.ehdr->e_ident[EI_MAG2], ELFMAG2, "0x%x"); + assert_eq(elf.ehdr->e_ident[EI_MAG3], ELFMAG3, "0x%x"); + + /* Sanity check that this is an ELF64 relocatable object for AArch64. */ + assert_eq(elf.ehdr->e_ident[EI_CLASS], ELFCLASS64, "%u"); + assert_eq(elf.ehdr->e_ident[EI_DATA], ELFENDIAN, "%u"); + assert_eq(elf16toh(elf.ehdr->e_type), ET_REL, "%u"); + assert_eq(elf16toh(elf.ehdr->e_machine), EM_AARCH64, "%u"); + + /* Populate fields of the global struct. */ + elf.sh_table = section_by_off(elf64toh(elf.ehdr->e_shoff)); + elf.sh_string = section_begin(section_by_idx(elf16toh(elf.ehdr->e_shstrndx))); +} + +/* Print the prologue of the output ASM file. */ +static void emit_prologue(void) +{ + printf(".data\n" + ".pushsection " HYP_RELOC_SECTION ", \"a\"\n"); +} + +/* Print ASM statements needed as a prologue to a processed hyp section. */ +static void emit_section_prologue(const char *sh_orig_name) +{ + /* Declare the hyp section symbol. */ + printf(".global %s%s\n", HYP_SECTION_SYMBOL_PREFIX, sh_orig_name); +} + +/* + * Print ASM statements to create a hyp relocation entry for a given + * R_AARCH64_ABS64 relocation. + * + * The linker of vmlinux will populate the position given by `rela` with + * an absolute 64-bit kernel VA. If the kernel is relocatable, it will + * also generate a dynamic relocation entry so that the kernel can shift + * the address at runtime for KASLR. + * + * Emit a 32-bit offset from the current address to the position given + * by `rela`. This way the kernel can iterate over all kernel VAs used + * by hyp at runtime and convert them to hyp VAs. However, that offset + * will not be known until linking of `vmlinux`, so emit a PREL32 + * relocation referencing a symbol that the hyp linker script put at + * the beginning of the relocated section + the offset from `rela`. + */ +static void emit_rela_abs64(Elf64_Rela *rela, const char *sh_orig_name) +{ + /* Offset of this reloc from the beginning of HYP_RELOC_SECTION. */ + static size_t reloc_offset; + + /* Create storage for the 32-bit offset. */ + printf(".word 0\n"); + + /* + * Create a PREL32 relocation which instructs the linker of `vmlinux` + * to insert offset to position <base> + <offset>, where <base> is + * a symbol at the beginning of the relocated section, and <offset> + * is `rela->r_offset`. + */ + printf(".reloc %lu, R_AARCH64_PREL32, %s%s + 0x%lx\n", + reloc_offset, HYP_SECTION_SYMBOL_PREFIX, sh_orig_name, + elf64toh(rela->r_offset)); + + reloc_offset += 4; +} + +/* Print the epilogue of the output ASM file. */ +static void emit_epilogue(void) +{ + printf(".popsection\n"); +} + +/* + * Iterate over all RELA relocations in a given section and emit + * hyp relocation data for all absolute addresses in hyp code/data. + * + * Static relocations that generate PC-relative-addressing are ignored. + * Failure is reported for unexpected relocation types. + */ +static void emit_rela_section(Elf64_Shdr *sh_rela) +{ + Elf64_Shdr *sh_orig = &elf.sh_table[elf32toh(sh_rela->sh_info)]; + const char *sh_orig_name = section_name(sh_orig); + Elf64_Rela *rela; + + /* Skip all non-hyp sections. */ + if (!starts_with(sh_orig_name, HYP_SECTION_PREFIX)) + return; + + emit_section_prologue(sh_orig_name); + + for_each_rela(sh_rela, rela) { + uint32_t type = (uint32_t)elf64toh(rela->r_info); + + /* Check that rela points inside the relocated section. */ + assert_lt(elf64toh(rela->r_offset), elf64toh(sh_orig->sh_size), "0x%lx"); + + switch (type) { + /* + * Data relocations to generate absolute addressing. + * Emit a hyp relocation. + */ + case R_AARCH64_ABS64: + emit_rela_abs64(rela, sh_orig_name); + break; + /* Allow relocations to generate PC-relative addressing. */ + case R_AARCH64_LD_PREL_LO19: + case R_AARCH64_ADR_PREL_LO21: + case R_AARCH64_ADR_PREL_PG_HI21: + case R_AARCH64_ADR_PREL_PG_HI21_NC: + case R_AARCH64_ADD_ABS_LO12_NC: + case R_AARCH64_LDST8_ABS_LO12_NC: + case R_AARCH64_LDST16_ABS_LO12_NC: + case R_AARCH64_LDST32_ABS_LO12_NC: + case R_AARCH64_LDST64_ABS_LO12_NC: + case R_AARCH64_LDST128_ABS_LO12_NC: + break; + /* Allow relative relocations for control-flow instructions. */ + case R_AARCH64_TSTBR14: + case R_AARCH64_CONDBR19: + case R_AARCH64_JUMP26: + case R_AARCH64_CALL26: + break; + /* Allow group relocations to create PC-relative offset inline. */ + case R_AARCH64_MOVW_PREL_G0: + case R_AARCH64_MOVW_PREL_G0_NC: + case R_AARCH64_MOVW_PREL_G1: + case R_AARCH64_MOVW_PREL_G1_NC: + case R_AARCH64_MOVW_PREL_G2: + case R_AARCH64_MOVW_PREL_G2_NC: + case R_AARCH64_MOVW_PREL_G3: + break; + default: + fatal_error("Unexpected RELA type %u", type); + } + } +} + +/* Iterate over all sections and emit hyp relocation data for RELA sections. */ +static void emit_all_relocs(void) +{ + Elf64_Shdr *shdr; + + for_each_section(shdr) { + switch (elf32toh(shdr->sh_type)) { + case SHT_REL: + fatal_error("Unexpected SHT_REL section \"%s\"", + section_name(shdr)); + case SHT_RELA: + emit_rela_section(shdr); + break; + } + } +} + +int main(int argc, const char **argv) +{ + if (argc != 2) { + fprintf(stderr, "Usage: %s <elf_input>\n", argv[0]); + return EXIT_FAILURE; + } + + init_elf(argv[1]); + + emit_prologue(); + emit_all_relocs(); + emit_epilogue(); + + return EXIT_SUCCESS; +} diff --git a/arch/arm64/kvm/hyp/nvhe/host.S b/arch/arm64/kvm/hyp/nvhe/host.S index a820dfdc9c25..5d94584840cc 100644 --- a/arch/arm64/kvm/hyp/nvhe/host.S +++ b/arch/arm64/kvm/hyp/nvhe/host.S @@ -71,31 +71,33 @@ SYM_FUNC_START(__host_enter) SYM_FUNC_END(__host_enter) /* - * void __noreturn __hyp_do_panic(bool restore_host, u64 spsr, u64 elr, u64 par); + * void __noreturn __hyp_do_panic(struct kvm_cpu_context *host_ctxt, u64 spsr, + * u64 elr, u64 par); */ SYM_FUNC_START(__hyp_do_panic) - /* Load the format arguments into x1-7 */ - mov x6, x3 - get_vcpu_ptr x7, x3 - - mrs x3, esr_el2 - mrs x4, far_el2 - mrs x5, hpfar_el2 - /* Prepare and exit to the host's panic funciton. */ mov lr, #(PSR_F_BIT | PSR_I_BIT | PSR_A_BIT | PSR_D_BIT |\ PSR_MODE_EL1h) msr spsr_el2, lr ldr lr, =panic + hyp_kimg_va lr, x6 msr elr_el2, lr - /* - * Set the panic format string and enter the host, conditionally - * restoring the host context. - */ - cmp x0, xzr + mov x29, x0 + + /* Load the format string into x0 and arguments into x1-7 */ ldr x0, =__hyp_panic_string - b.eq __host_enter_without_restoring + hyp_kimg_va x0, x6 + + /* Load the format arguments into x1-7. */ + mov x6, x3 + get_vcpu_ptr x7, x3 + mrs x3, esr_el2 + mrs x4, far_el2 + mrs x5, hpfar_el2 + + /* Enter the host, conditionally restoring the host context. */ + cbz x29, __host_enter_without_restoring b __host_enter_for_panic SYM_FUNC_END(__hyp_do_panic) @@ -124,7 +126,7 @@ SYM_FUNC_END(__hyp_do_panic) * Preserve x0-x4, which may contain stub parameters. */ ldr x5, =__kvm_handle_stub_hvc - kimg_pa x5, x6 + hyp_pa x5, x6 br x5 .L__vect_end\@: .if ((.L__vect_end\@ - .L__vect_start\@) > 0x80) diff --git a/arch/arm64/kvm/hyp/nvhe/hyp-init.S b/arch/arm64/kvm/hyp/nvhe/hyp-init.S index b17bf19217f1..c631e29fb001 100644 --- a/arch/arm64/kvm/hyp/nvhe/hyp-init.S +++ b/arch/arm64/kvm/hyp/nvhe/hyp-init.S @@ -18,7 +18,7 @@ #include <asm/virt.h> .text - .pushsection .hyp.idmap.text, "ax" + .pushsection .idmap.text, "ax" .align 11 @@ -57,17 +57,10 @@ __do_hyp_init: cmp x0, #HVC_STUB_HCALL_NR b.lo __kvm_handle_stub_hvc - // We only actively check bits [24:31], and everything - // else has to be zero, which we check at build time. -#if (KVM_HOST_SMCCC_FUNC(__kvm_hyp_init) & 0xFFFFFFFF00FFFFFF) -#error Unexpected __KVM_HOST_SMCCC_FUNC___kvm_hyp_init value -#endif - - ror x0, x0, #24 - eor x0, x0, #((KVM_HOST_SMCCC_FUNC(__kvm_hyp_init) >> 24) & 0xF) - ror x0, x0, #4 - eor x0, x0, #((KVM_HOST_SMCCC_FUNC(__kvm_hyp_init) >> 28) & 0xF) - cbz x0, 1f + mov x3, #KVM_HOST_SMCCC_FUNC(__kvm_hyp_init) + cmp x0, x3 + b.eq 1f + mov x0, #SMCCC_RET_NOT_SUPPORTED eret @@ -141,7 +134,6 @@ alternative_else_nop_endif /* Set the host vector */ ldr x0, =__kvm_hyp_host_vector - kimg_hyp_va x0, x1 msr vbar_el2, x0 ret @@ -191,7 +183,7 @@ SYM_CODE_START_LOCAL(__kvm_hyp_init_cpu) 2: msr SPsel, #1 // We want to use SP_EL{1,2} /* Initialize EL2 CPU state to sane values. */ - init_el2_state nvhe // Clobbers x0..x2 + init_el2_state // Clobbers x0..x2 /* Enable MMU, set vectors and stack. */ mov x0, x28 @@ -200,7 +192,6 @@ SYM_CODE_START_LOCAL(__kvm_hyp_init_cpu) /* Leave idmap. */ mov x0, x29 ldr x1, =kvm_host_psci_cpu_entry - kimg_hyp_va x1, x2 br x1 SYM_CODE_END(__kvm_hyp_init_cpu) diff --git a/arch/arm64/kvm/hyp/nvhe/hyp-main.c b/arch/arm64/kvm/hyp/nvhe/hyp-main.c index a906f9e2ff34..936328207bde 100644 --- a/arch/arm64/kvm/hyp/nvhe/hyp-main.c +++ b/arch/arm64/kvm/hyp/nvhe/hyp-main.c @@ -46,11 +46,11 @@ static void handle___kvm_tlb_flush_vmid(struct kvm_cpu_context *host_ctxt) __kvm_tlb_flush_vmid(kern_hyp_va(mmu)); } -static void handle___kvm_tlb_flush_local_vmid(struct kvm_cpu_context *host_ctxt) +static void handle___kvm_flush_cpu_context(struct kvm_cpu_context *host_ctxt) { DECLARE_REG(struct kvm_s2_mmu *, mmu, host_ctxt, 1); - __kvm_tlb_flush_local_vmid(kern_hyp_va(mmu)); + __kvm_flush_cpu_context(kern_hyp_va(mmu)); } static void handle___kvm_timer_set_cntvoff(struct kvm_cpu_context *host_ctxt) @@ -67,9 +67,9 @@ static void handle___kvm_enable_ssbs(struct kvm_cpu_context *host_ctxt) write_sysreg_el2(tmp, SYS_SCTLR); } -static void handle___vgic_v3_get_ich_vtr_el2(struct kvm_cpu_context *host_ctxt) +static void handle___vgic_v3_get_gic_config(struct kvm_cpu_context *host_ctxt) { - cpu_reg(host_ctxt, 1) = __vgic_v3_get_ich_vtr_el2(); + cpu_reg(host_ctxt, 1) = __vgic_v3_get_gic_config(); } static void handle___vgic_v3_read_vmcr(struct kvm_cpu_context *host_ctxt) @@ -108,17 +108,17 @@ static void handle___vgic_v3_restore_aprs(struct kvm_cpu_context *host_ctxt) typedef void (*hcall_t)(struct kvm_cpu_context *); -#define HANDLE_FUNC(x) [__KVM_HOST_SMCCC_FUNC_##x] = kimg_fn_ptr(handle_##x) +#define HANDLE_FUNC(x) [__KVM_HOST_SMCCC_FUNC_##x] = (hcall_t)handle_##x -static const hcall_t *host_hcall[] = { +static const hcall_t host_hcall[] = { HANDLE_FUNC(__kvm_vcpu_run), HANDLE_FUNC(__kvm_flush_vm_context), HANDLE_FUNC(__kvm_tlb_flush_vmid_ipa), HANDLE_FUNC(__kvm_tlb_flush_vmid), - HANDLE_FUNC(__kvm_tlb_flush_local_vmid), + HANDLE_FUNC(__kvm_flush_cpu_context), HANDLE_FUNC(__kvm_timer_set_cntvoff), HANDLE_FUNC(__kvm_enable_ssbs), - HANDLE_FUNC(__vgic_v3_get_ich_vtr_el2), + HANDLE_FUNC(__vgic_v3_get_gic_config), HANDLE_FUNC(__vgic_v3_read_vmcr), HANDLE_FUNC(__vgic_v3_write_vmcr), HANDLE_FUNC(__vgic_v3_init_lrs), @@ -130,7 +130,6 @@ static const hcall_t *host_hcall[] = { static void handle_host_hcall(struct kvm_cpu_context *host_ctxt) { DECLARE_REG(unsigned long, id, host_ctxt, 0); - const hcall_t *kfn; hcall_t hfn; id -= KVM_HOST_SMCCC_ID(0); @@ -138,13 +137,11 @@ static void handle_host_hcall(struct kvm_cpu_context *host_ctxt) if (unlikely(id >= ARRAY_SIZE(host_hcall))) goto inval; - kfn = host_hcall[id]; - if (unlikely(!kfn)) + hfn = host_hcall[id]; + if (unlikely(!hfn)) goto inval; cpu_reg(host_ctxt, 0) = SMCCC_RET_SUCCESS; - - hfn = kimg_fn_hyp_va(kfn); hfn(host_ctxt); return; diff --git a/arch/arm64/kvm/hyp/nvhe/hyp-smp.c b/arch/arm64/kvm/hyp/nvhe/hyp-smp.c index 2997aa156d8e..879559057dee 100644 --- a/arch/arm64/kvm/hyp/nvhe/hyp-smp.c +++ b/arch/arm64/kvm/hyp/nvhe/hyp-smp.c @@ -33,8 +33,8 @@ unsigned long __hyp_per_cpu_offset(unsigned int cpu) if (cpu >= ARRAY_SIZE(kvm_arm_hyp_percpu_base)) hyp_panic(); - cpu_base_array = (unsigned long *)hyp_symbol_addr(kvm_arm_hyp_percpu_base); + cpu_base_array = (unsigned long *)&kvm_arm_hyp_percpu_base; this_cpu_base = kern_hyp_va(cpu_base_array[cpu]); - elf_base = (unsigned long)hyp_symbol_addr(__per_cpu_start); + elf_base = (unsigned long)&__per_cpu_start; return this_cpu_base - elf_base; } diff --git a/arch/arm64/kvm/hyp/nvhe/hyp.lds.S b/arch/arm64/kvm/hyp/nvhe/hyp.lds.S index 1206d0d754d5..cd119d82d8e3 100644 --- a/arch/arm64/kvm/hyp/nvhe/hyp.lds.S +++ b/arch/arm64/kvm/hyp/nvhe/hyp.lds.S @@ -12,14 +12,17 @@ #include <asm/memory.h> SECTIONS { + HYP_SECTION(.idmap.text) HYP_SECTION(.text) + HYP_SECTION(.data..ro_after_init) + HYP_SECTION(.rodata) + /* * .hyp..data..percpu needs to be page aligned to maintain the same * alignment for when linking into vmlinux. */ . = ALIGN(PAGE_SIZE); - HYP_SECTION_NAME(.data..percpu) : { + BEGIN_HYP_SECTION(.data..percpu) PERCPU_INPUT(L1_CACHE_BYTES) - } - HYP_SECTION(.data..ro_after_init) + END_HYP_SECTION } diff --git a/arch/arm64/kvm/hyp/nvhe/psci-relay.c b/arch/arm64/kvm/hyp/nvhe/psci-relay.c index 8e7128cb7667..63de71c0481e 100644 --- a/arch/arm64/kvm/hyp/nvhe/psci-relay.c +++ b/arch/arm64/kvm/hyp/nvhe/psci-relay.c @@ -128,8 +128,8 @@ static int psci_cpu_on(u64 func_id, struct kvm_cpu_context *host_ctxt) if (cpu_id == INVALID_CPU_ID) return PSCI_RET_INVALID_PARAMS; - boot_args = per_cpu_ptr(hyp_symbol_addr(cpu_on_args), cpu_id); - init_params = per_cpu_ptr(hyp_symbol_addr(kvm_init_params), cpu_id); + boot_args = per_cpu_ptr(&cpu_on_args, cpu_id); + init_params = per_cpu_ptr(&kvm_init_params, cpu_id); /* Check if the target CPU is already being booted. */ if (!try_acquire_boot_args(boot_args)) @@ -140,7 +140,7 @@ static int psci_cpu_on(u64 func_id, struct kvm_cpu_context *host_ctxt) wmb(); ret = psci_call(func_id, mpidr, - __hyp_pa(hyp_symbol_addr(kvm_hyp_cpu_entry)), + __hyp_pa(&kvm_hyp_cpu_entry), __hyp_pa(init_params)); /* If successful, the lock will be released by the target CPU. */ @@ -159,8 +159,8 @@ static int psci_cpu_suspend(u64 func_id, struct kvm_cpu_context *host_ctxt) struct psci_boot_args *boot_args; struct kvm_nvhe_init_params *init_params; - boot_args = this_cpu_ptr(hyp_symbol_addr(suspend_args)); - init_params = this_cpu_ptr(hyp_symbol_addr(kvm_init_params)); + boot_args = this_cpu_ptr(&suspend_args); + init_params = this_cpu_ptr(&kvm_init_params); /* * No need to acquire a lock before writing to boot_args because a core @@ -174,7 +174,7 @@ static int psci_cpu_suspend(u64 func_id, struct kvm_cpu_context *host_ctxt) * point if it is a deep sleep state. */ return psci_call(func_id, power_state, - __hyp_pa(hyp_symbol_addr(kvm_hyp_cpu_resume)), + __hyp_pa(&kvm_hyp_cpu_resume), __hyp_pa(init_params)); } @@ -186,8 +186,8 @@ static int psci_system_suspend(u64 func_id, struct kvm_cpu_context *host_ctxt) struct psci_boot_args *boot_args; struct kvm_nvhe_init_params *init_params; - boot_args = this_cpu_ptr(hyp_symbol_addr(suspend_args)); - init_params = this_cpu_ptr(hyp_symbol_addr(kvm_init_params)); + boot_args = this_cpu_ptr(&suspend_args); + init_params = this_cpu_ptr(&kvm_init_params); /* * No need to acquire a lock before writing to boot_args because a core @@ -198,7 +198,7 @@ static int psci_system_suspend(u64 func_id, struct kvm_cpu_context *host_ctxt) /* Will only return on error. */ return psci_call(func_id, - __hyp_pa(hyp_symbol_addr(kvm_hyp_cpu_resume)), + __hyp_pa(&kvm_hyp_cpu_resume), __hyp_pa(init_params), 0); } @@ -207,12 +207,12 @@ asmlinkage void __noreturn kvm_host_psci_cpu_entry(bool is_cpu_on) struct psci_boot_args *boot_args; struct kvm_cpu_context *host_ctxt; - host_ctxt = &this_cpu_ptr(hyp_symbol_addr(kvm_host_data))->host_ctxt; + host_ctxt = &this_cpu_ptr(&kvm_host_data)->host_ctxt; if (is_cpu_on) - boot_args = this_cpu_ptr(hyp_symbol_addr(cpu_on_args)); + boot_args = this_cpu_ptr(&cpu_on_args); else - boot_args = this_cpu_ptr(hyp_symbol_addr(suspend_args)); + boot_args = this_cpu_ptr(&suspend_args); cpu_reg(host_ctxt, 0) = boot_args->r0; write_sysreg_el2(boot_args->pc, SYS_ELR); diff --git a/arch/arm64/kvm/hyp/nvhe/switch.c b/arch/arm64/kvm/hyp/nvhe/switch.c index f3d0e9eca56c..68ab6b4d5141 100644 --- a/arch/arm64/kvm/hyp/nvhe/switch.c +++ b/arch/arm64/kvm/hyp/nvhe/switch.c @@ -192,6 +192,14 @@ int __kvm_vcpu_run(struct kvm_vcpu *vcpu) pmu_switch_needed = __pmu_switch_to_guest(host_ctxt); __sysreg_save_state_nvhe(host_ctxt); + /* + * We must flush and disable the SPE buffer for nVHE, as + * the translation regime(EL1&0) is going to be loaded with + * that of the guest. And we must do this before we change the + * translation regime to EL2 (via MDCR_EL2_E2PB == 0) and + * before we load guest Stage1. + */ + __debug_save_host_buffers_nvhe(vcpu); __adjust_pc(vcpu); @@ -234,11 +242,12 @@ int __kvm_vcpu_run(struct kvm_vcpu *vcpu) if (vcpu->arch.flags & KVM_ARM64_FP_ENABLED) __fpsimd_save_fpexc32(vcpu); + __debug_switch_to_host(vcpu); /* * This must come after restoring the host sysregs, since a non-VHE * system may enable SPE here and make use of the TTBRs. */ - __debug_switch_to_host(vcpu); + __debug_restore_host_buffers_nvhe(vcpu); if (pmu_switch_needed) __pmu_switch_to_host(host_ctxt); @@ -257,7 +266,6 @@ void __noreturn hyp_panic(void) u64 spsr = read_sysreg_el2(SYS_SPSR); u64 elr = read_sysreg_el2(SYS_ELR); u64 par = read_sysreg_par(); - bool restore_host = true; struct kvm_cpu_context *host_ctxt; struct kvm_vcpu *vcpu; @@ -271,7 +279,7 @@ void __noreturn hyp_panic(void) __sysreg_restore_state_nvhe(host_ctxt); } - __hyp_do_panic(restore_host, spsr, elr, par); + __hyp_do_panic(host_ctxt, spsr, elr, par); unreachable(); } diff --git a/arch/arm64/kvm/hyp/nvhe/tlb.c b/arch/arm64/kvm/hyp/nvhe/tlb.c index fbde89a2c6e8..229b06748c20 100644 --- a/arch/arm64/kvm/hyp/nvhe/tlb.c +++ b/arch/arm64/kvm/hyp/nvhe/tlb.c @@ -123,7 +123,7 @@ void __kvm_tlb_flush_vmid(struct kvm_s2_mmu *mmu) __tlb_switch_to_host(&cxt); } -void __kvm_tlb_flush_local_vmid(struct kvm_s2_mmu *mmu) +void __kvm_flush_cpu_context(struct kvm_s2_mmu *mmu) { struct tlb_inv_context cxt; @@ -131,6 +131,7 @@ void __kvm_tlb_flush_local_vmid(struct kvm_s2_mmu *mmu) __tlb_switch_to_guest(mmu, &cxt); __tlbi(vmalle1); + asm volatile("ic iallu"); dsb(nsh); isb(); diff --git a/arch/arm64/kvm/hyp/pgtable.c b/arch/arm64/kvm/hyp/pgtable.c index bdf8e55ed308..926fc07074f5 100644 --- a/arch/arm64/kvm/hyp/pgtable.c +++ b/arch/arm64/kvm/hyp/pgtable.c @@ -45,6 +45,10 @@ #define KVM_PTE_LEAF_ATTR_HI_S2_XN BIT(54) +#define KVM_PTE_LEAF_ATTR_S2_PERMS (KVM_PTE_LEAF_ATTR_LO_S2_S2AP_R | \ + KVM_PTE_LEAF_ATTR_LO_S2_S2AP_W | \ + KVM_PTE_LEAF_ATTR_HI_S2_XN) + struct kvm_pgtable_walk_data { struct kvm_pgtable *pgt; struct kvm_pgtable_walker *walker; @@ -170,10 +174,9 @@ static void kvm_set_table_pte(kvm_pte_t *ptep, kvm_pte_t *childp) smp_store_release(ptep, pte); } -static bool kvm_set_valid_leaf_pte(kvm_pte_t *ptep, u64 pa, kvm_pte_t attr, - u32 level) +static kvm_pte_t kvm_init_valid_leaf_pte(u64 pa, kvm_pte_t attr, u32 level) { - kvm_pte_t old = *ptep, pte = kvm_phys_to_pte(pa); + kvm_pte_t pte = kvm_phys_to_pte(pa); u64 type = (level == KVM_PGTABLE_MAX_LEVELS - 1) ? KVM_PTE_TYPE_PAGE : KVM_PTE_TYPE_BLOCK; @@ -181,12 +184,7 @@ static bool kvm_set_valid_leaf_pte(kvm_pte_t *ptep, u64 pa, kvm_pte_t attr, pte |= FIELD_PREP(KVM_PTE_TYPE, type); pte |= KVM_PTE_VALID; - /* Tolerate KVM recreating the exact same mapping. */ - if (kvm_pte_valid(old)) - return old == pte; - - smp_store_release(ptep, pte); - return true; + return pte; } static int kvm_pgtable_visitor_cb(struct kvm_pgtable_walk_data *data, u64 addr, @@ -225,6 +223,7 @@ static inline int __kvm_pgtable_visit(struct kvm_pgtable_walk_data *data, goto out; if (!table) { + data->addr = ALIGN_DOWN(data->addr, kvm_granule_size(level)); data->addr += kvm_granule_size(level); goto out; } @@ -341,12 +340,17 @@ static int hyp_map_set_prot_attr(enum kvm_pgtable_prot prot, static bool hyp_map_walker_try_leaf(u64 addr, u64 end, u32 level, kvm_pte_t *ptep, struct hyp_map_data *data) { + kvm_pte_t new, old = *ptep; u64 granule = kvm_granule_size(level), phys = data->phys; if (!kvm_block_mapping_supported(addr, end, phys, level)) return false; - WARN_ON(!kvm_set_valid_leaf_pte(ptep, phys, data->attr, level)); + /* Tolerate KVM recreating the exact same mapping */ + new = kvm_init_valid_leaf_pte(phys, data->attr, level); + if (old != new && !WARN_ON(kvm_pte_valid(old))) + smp_store_release(ptep, new); + data->phys += granule; return true; } @@ -461,34 +465,41 @@ static int stage2_map_set_prot_attr(enum kvm_pgtable_prot prot, return 0; } -static bool stage2_map_walker_try_leaf(u64 addr, u64 end, u32 level, - kvm_pte_t *ptep, - struct stage2_map_data *data) +static int stage2_map_walker_try_leaf(u64 addr, u64 end, u32 level, + kvm_pte_t *ptep, + struct stage2_map_data *data) { + kvm_pte_t new, old = *ptep; u64 granule = kvm_granule_size(level), phys = data->phys; + struct page *page = virt_to_page(ptep); if (!kvm_block_mapping_supported(addr, end, phys, level)) - return false; - - /* - * If the PTE was already valid, drop the refcount on the table - * early, as it will be bumped-up again in stage2_map_walk_leaf(). - * This ensures that the refcount stays constant across a valid to - * valid PTE update. - */ - if (kvm_pte_valid(*ptep)) - put_page(virt_to_page(ptep)); - - if (kvm_set_valid_leaf_pte(ptep, phys, data->attr, level)) - goto out; + return -E2BIG; + + new = kvm_init_valid_leaf_pte(phys, data->attr, level); + if (kvm_pte_valid(old)) { + /* + * Skip updating the PTE if we are trying to recreate the exact + * same mapping or only change the access permissions. Instead, + * the vCPU will exit one more time from guest if still needed + * and then go through the path of relaxing permissions. + */ + if (!((old ^ new) & (~KVM_PTE_LEAF_ATTR_S2_PERMS))) + return -EAGAIN; + + /* + * There's an existing different valid leaf entry, so perform + * break-before-make. + */ + kvm_set_invalid_pte(ptep); + kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, data->mmu, addr, level); + put_page(page); + } - /* There's an existing valid leaf entry, so perform break-before-make */ - kvm_set_invalid_pte(ptep); - kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, data->mmu, addr, level); - kvm_set_valid_leaf_pte(ptep, phys, data->attr, level); -out: + smp_store_release(ptep, new); + get_page(page); data->phys += granule; - return true; + return 0; } static int stage2_map_walk_table_pre(u64 addr, u64 end, u32 level, @@ -516,6 +527,7 @@ static int stage2_map_walk_table_pre(u64 addr, u64 end, u32 level, static int stage2_map_walk_leaf(u64 addr, u64 end, u32 level, kvm_pte_t *ptep, struct stage2_map_data *data) { + int ret; kvm_pte_t *childp, pte = *ptep; struct page *page = virt_to_page(ptep); @@ -526,8 +538,9 @@ static int stage2_map_walk_leaf(u64 addr, u64 end, u32 level, kvm_pte_t *ptep, return 0; } - if (stage2_map_walker_try_leaf(addr, end, level, ptep, data)) - goto out_get_page; + ret = stage2_map_walker_try_leaf(addr, end, level, ptep, data); + if (ret != -E2BIG) + return ret; if (WARN_ON(level == KVM_PGTABLE_MAX_LEVELS - 1)) return -EINVAL; @@ -551,9 +564,8 @@ static int stage2_map_walk_leaf(u64 addr, u64 end, u32 level, kvm_pte_t *ptep, } kvm_set_table_pte(ptep, childp); - -out_get_page: get_page(page); + return 0; } diff --git a/arch/arm64/kvm/hyp/vgic-v2-cpuif-proxy.c b/arch/arm64/kvm/hyp/vgic-v2-cpuif-proxy.c index 8f0585640241..87a54375bd6e 100644 --- a/arch/arm64/kvm/hyp/vgic-v2-cpuif-proxy.c +++ b/arch/arm64/kvm/hyp/vgic-v2-cpuif-proxy.c @@ -64,7 +64,7 @@ int __vgic_v2_perform_cpuif_access(struct kvm_vcpu *vcpu) } rd = kvm_vcpu_dabt_get_rd(vcpu); - addr = hyp_symbol_addr(kvm_vgic_global_state)->vcpu_hyp_va; + addr = kvm_vgic_global_state.vcpu_hyp_va; addr += fault_ipa - vgic->vgic_cpu_base; if (kvm_vcpu_dabt_iswrite(vcpu)) { diff --git a/arch/arm64/kvm/hyp/vgic-v3-sr.c b/arch/arm64/kvm/hyp/vgic-v3-sr.c index 80406f463c28..ee3682b9873c 100644 --- a/arch/arm64/kvm/hyp/vgic-v3-sr.c +++ b/arch/arm64/kvm/hyp/vgic-v3-sr.c @@ -405,9 +405,45 @@ void __vgic_v3_init_lrs(void) __gic_v3_set_lr(0, i); } -u64 __vgic_v3_get_ich_vtr_el2(void) +/* + * Return the GIC CPU configuration: + * - [31:0] ICH_VTR_EL2 + * - [62:32] RES0 + * - [63] MMIO (GICv2) capable + */ +u64 __vgic_v3_get_gic_config(void) { - return read_gicreg(ICH_VTR_EL2); + u64 val, sre = read_gicreg(ICC_SRE_EL1); + unsigned long flags = 0; + + /* + * To check whether we have a MMIO-based (GICv2 compatible) + * CPU interface, we need to disable the system register + * view. To do that safely, we have to prevent any interrupt + * from firing (which would be deadly). + * + * Note that this only makes sense on VHE, as interrupts are + * already masked for nVHE as part of the exception entry to + * EL2. + */ + if (has_vhe()) + flags = local_daif_save(); + + write_gicreg(0, ICC_SRE_EL1); + isb(); + + val = read_gicreg(ICC_SRE_EL1); + + write_gicreg(sre, ICC_SRE_EL1); + isb(); + + if (has_vhe()) + local_daif_restore(flags); + + val = (val & ICC_SRE_EL1_SRE) ? 0 : (1ULL << 63); + val |= read_gicreg(ICH_VTR_EL2); + + return val; } u64 __vgic_v3_read_vmcr(void) diff --git a/arch/arm64/kvm/hyp/vhe/tlb.c b/arch/arm64/kvm/hyp/vhe/tlb.c index fd7895945bbc..66f17349f0c3 100644 --- a/arch/arm64/kvm/hyp/vhe/tlb.c +++ b/arch/arm64/kvm/hyp/vhe/tlb.c @@ -127,7 +127,7 @@ void __kvm_tlb_flush_vmid(struct kvm_s2_mmu *mmu) __tlb_switch_to_host(&cxt); } -void __kvm_tlb_flush_local_vmid(struct kvm_s2_mmu *mmu) +void __kvm_flush_cpu_context(struct kvm_s2_mmu *mmu) { struct tlb_inv_context cxt; @@ -135,6 +135,7 @@ void __kvm_tlb_flush_local_vmid(struct kvm_s2_mmu *mmu) __tlb_switch_to_guest(mmu, &cxt); __tlbi(vmalle1); + asm volatile("ic iallu"); dsb(nsh); isb(); diff --git a/arch/arm64/kvm/hypercalls.c b/arch/arm64/kvm/hypercalls.c index 25ea4ecb6449..ead21b98b620 100644 --- a/arch/arm64/kvm/hypercalls.c +++ b/arch/arm64/kvm/hypercalls.c @@ -71,6 +71,12 @@ int kvm_hvc_call_handler(struct kvm_vcpu *vcpu) if (gpa != GPA_INVALID) val = gpa; break; + case ARM_SMCCC_TRNG_VERSION: + case ARM_SMCCC_TRNG_FEATURES: + case ARM_SMCCC_TRNG_GET_UUID: + case ARM_SMCCC_TRNG_RND32: + case ARM_SMCCC_TRNG_RND64: + return kvm_trng_call(vcpu); default: return kvm_psci_call(vcpu); } diff --git a/arch/arm64/kvm/mmu.c b/arch/arm64/kvm/mmu.c index 7d2257cc5438..8711894db8c2 100644 --- a/arch/arm64/kvm/mmu.c +++ b/arch/arm64/kvm/mmu.c @@ -879,11 +879,8 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, if (vma_pagesize == PAGE_SIZE && !force_pte) vma_pagesize = transparent_hugepage_adjust(memslot, hva, &pfn, &fault_ipa); - if (writable) { + if (writable) prot |= KVM_PGTABLE_PROT_W; - kvm_set_pfn_dirty(pfn); - mark_page_dirty(kvm, gfn); - } if (fault_status != FSC_PERM && !device) clean_dcache_guest_page(pfn, vma_pagesize); @@ -911,11 +908,17 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, memcache); } + /* Mark the page dirty only if the fault is handled successfully */ + if (writable && !ret) { + kvm_set_pfn_dirty(pfn); + mark_page_dirty(kvm, gfn); + } + out_unlock: spin_unlock(&kvm->mmu_lock); kvm_set_pfn_accessed(pfn); kvm_release_pfn_clean(pfn); - return ret; + return ret != -EAGAIN ? ret : 0; } /* Resolve the access fault by making the page young again. */ @@ -1309,8 +1312,7 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm, * Prevent userspace from creating a memory region outside of the IPA * space addressable by the KVM guest IPA space. */ - if (memslot->base_gfn + memslot->npages >= - (kvm_phys_size(kvm) >> PAGE_SHIFT)) + if ((memslot->base_gfn + memslot->npages) > (kvm_phys_size(kvm) >> PAGE_SHIFT)) return -EFAULT; mmap_read_lock(current->mm); diff --git a/arch/arm64/kvm/perf.c b/arch/arm64/kvm/perf.c index d45b8b9a4415..739164324afe 100644 --- a/arch/arm64/kvm/perf.c +++ b/arch/arm64/kvm/perf.c @@ -11,6 +11,8 @@ #include <asm/kvm_emulate.h> +DEFINE_STATIC_KEY_FALSE(kvm_arm_pmu_available); + static int kvm_is_in_guest(void) { return kvm_get_running_vcpu() != NULL; @@ -48,6 +50,14 @@ static struct perf_guest_info_callbacks kvm_guest_cbs = { int kvm_perf_init(void) { + /* + * Check if HW_PERF_EVENTS are supported by checking the number of + * hardware performance counters. This could ensure the presence of + * a physical PMU and CONFIG_PERF_EVENT is selected. + */ + if (IS_ENABLED(CONFIG_ARM_PMU) && perf_num_counters() > 0) + static_branch_enable(&kvm_arm_pmu_available); + return perf_register_guest_info_callbacks(&kvm_guest_cbs); } diff --git a/arch/arm64/kvm/pmu-emul.c b/arch/arm64/kvm/pmu-emul.c index 247422ac78a9..e32c6e139a09 100644 --- a/arch/arm64/kvm/pmu-emul.c +++ b/arch/arm64/kvm/pmu-emul.c @@ -23,11 +23,11 @@ static void kvm_pmu_stop_counter(struct kvm_vcpu *vcpu, struct kvm_pmc *pmc); static u32 kvm_pmu_event_mask(struct kvm *kvm) { switch (kvm->arch.pmuver) { - case 1: /* ARMv8.0 */ + case ID_AA64DFR0_PMUVER_8_0: return GENMASK(9, 0); - case 4: /* ARMv8.1 */ - case 5: /* ARMv8.4 */ - case 6: /* ARMv8.5 */ + case ID_AA64DFR0_PMUVER_8_1: + case ID_AA64DFR0_PMUVER_8_4: + case ID_AA64DFR0_PMUVER_8_5: return GENMASK(15, 0); default: /* Shouldn't be here, just for sanity */ WARN_ONCE(1, "Unknown PMU version %d\n", kvm->arch.pmuver); @@ -795,6 +795,12 @@ u64 kvm_pmu_get_pmceid(struct kvm_vcpu *vcpu, bool pmceid1) base = 0; } else { val = read_sysreg(pmceid1_el0); + /* + * Don't advertise STALL_SLOT, as PMMIR_EL0 is handled + * as RAZ + */ + if (vcpu->kvm->arch.pmuver >= ID_AA64DFR0_PMUVER_8_4) + val &= ~BIT_ULL(ARMV8_PMUV3_PERFCTR_STALL_SLOT - 32); base = 32; } @@ -817,16 +823,6 @@ u64 kvm_pmu_get_pmceid(struct kvm_vcpu *vcpu, bool pmceid1) return val & mask; } -bool kvm_arm_support_pmu_v3(void) -{ - /* - * Check if HW_PERF_EVENTS are supported by checking the number of - * hardware performance counters. This could ensure the presence of - * a physical PMU and CONFIG_PERF_EVENT is selected. - */ - return (perf_num_counters() > 0); -} - int kvm_arm_pmu_v3_enable(struct kvm_vcpu *vcpu) { if (!kvm_vcpu_has_pmu(vcpu)) diff --git a/arch/arm64/kvm/reset.c b/arch/arm64/kvm/reset.c index 47f3f035f3ea..bd354cd45d28 100644 --- a/arch/arm64/kvm/reset.c +++ b/arch/arm64/kvm/reset.c @@ -311,23 +311,24 @@ int kvm_set_ipa_limit(void) } switch (cpuid_feature_extract_unsigned_field(mmfr0, tgran_2)) { - default: - case 1: + case ID_AA64MMFR0_TGRAN_2_SUPPORTED_NONE: kvm_err("PAGE_SIZE not supported at Stage-2, giving up\n"); return -EINVAL; - case 0: + case ID_AA64MMFR0_TGRAN_2_SUPPORTED_DEFAULT: kvm_debug("PAGE_SIZE supported at Stage-2 (default)\n"); break; - case 2: + case ID_AA64MMFR0_TGRAN_2_SUPPORTED_MIN ... ID_AA64MMFR0_TGRAN_2_SUPPORTED_MAX: kvm_debug("PAGE_SIZE supported at Stage-2 (advertised)\n"); break; + default: + kvm_err("Unsupported value for TGRAN_2, giving up\n"); + return -EINVAL; } kvm_ipa_limit = id_aa64mmfr0_parange_to_phys_shift(parange); - WARN(kvm_ipa_limit < KVM_PHYS_SHIFT, - "KVM IPA Size Limit (%d bits) is smaller than default size\n", - kvm_ipa_limit); - kvm_info("IPA Size Limit: %d bits\n", kvm_ipa_limit); + kvm_info("IPA Size Limit: %d bits%s\n", kvm_ipa_limit, + ((kvm_ipa_limit < KVM_PHYS_SHIFT) ? + " (Reduced IPA size, limited VM/VMM compatibility)" : "")); return 0; } @@ -356,6 +357,11 @@ int kvm_arm_setup_stage2(struct kvm *kvm, unsigned long type) return -EINVAL; } else { phys_shift = KVM_PHYS_SHIFT; + if (phys_shift > kvm_ipa_limit) { + pr_warn_once("%s using unsupported default IPA limit, upgrade your VMM\n", + current->comm); + return -EINVAL; + } } mmfr0 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1); diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c index 7c4f79532406..4f2f1e3145de 100644 --- a/arch/arm64/kvm/sys_regs.c +++ b/arch/arm64/kvm/sys_regs.c @@ -9,6 +9,7 @@ * Christoffer Dall <c.dall@virtualopensystems.com> */ +#include <linux/bitfield.h> #include <linux/bsearch.h> #include <linux/kvm_host.h> #include <linux/mm.h> @@ -700,14 +701,18 @@ static bool access_pmselr(struct kvm_vcpu *vcpu, struct sys_reg_params *p, static bool access_pmceid(struct kvm_vcpu *vcpu, struct sys_reg_params *p, const struct sys_reg_desc *r) { - u64 pmceid; + u64 pmceid, mask, shift; BUG_ON(p->is_write); if (pmu_access_el0_disabled(vcpu)) return false; + get_access_mask(r, &mask, &shift); + pmceid = kvm_pmu_get_pmceid(vcpu, (p->Op2 & 1)); + pmceid &= mask; + pmceid >>= shift; p->regval = pmceid; @@ -1021,6 +1026,8 @@ static bool access_arch_timer(struct kvm_vcpu *vcpu, return true; } +#define FEATURE(x) (GENMASK_ULL(x##_SHIFT + 3, x##_SHIFT)) + /* Read a sanitised cpufeature ID register by sys_reg_desc */ static u64 read_id_reg(const struct kvm_vcpu *vcpu, struct sys_reg_desc const *r, bool raz) @@ -1028,36 +1035,41 @@ static u64 read_id_reg(const struct kvm_vcpu *vcpu, u32 id = reg_to_encoding(r); u64 val = raz ? 0 : read_sanitised_ftr_reg(id); - if (id == SYS_ID_AA64PFR0_EL1) { + switch (id) { + case SYS_ID_AA64PFR0_EL1: if (!vcpu_has_sve(vcpu)) - val &= ~(0xfUL << ID_AA64PFR0_SVE_SHIFT); - val &= ~(0xfUL << ID_AA64PFR0_AMU_SHIFT); - val &= ~(0xfUL << ID_AA64PFR0_CSV2_SHIFT); - val |= ((u64)vcpu->kvm->arch.pfr0_csv2 << ID_AA64PFR0_CSV2_SHIFT); - val &= ~(0xfUL << ID_AA64PFR0_CSV3_SHIFT); - val |= ((u64)vcpu->kvm->arch.pfr0_csv3 << ID_AA64PFR0_CSV3_SHIFT); - } else if (id == SYS_ID_AA64PFR1_EL1) { - val &= ~(0xfUL << ID_AA64PFR1_MTE_SHIFT); - } else if (id == SYS_ID_AA64ISAR1_EL1 && !vcpu_has_ptrauth(vcpu)) { - val &= ~((0xfUL << ID_AA64ISAR1_APA_SHIFT) | - (0xfUL << ID_AA64ISAR1_API_SHIFT) | - (0xfUL << ID_AA64ISAR1_GPA_SHIFT) | - (0xfUL << ID_AA64ISAR1_GPI_SHIFT)); - } else if (id == SYS_ID_AA64DFR0_EL1) { - u64 cap = 0; - - /* Limit guests to PMUv3 for ARMv8.1 */ - if (kvm_vcpu_has_pmu(vcpu)) - cap = ID_AA64DFR0_PMUVER_8_1; - + val &= ~FEATURE(ID_AA64PFR0_SVE); + val &= ~FEATURE(ID_AA64PFR0_AMU); + val &= ~FEATURE(ID_AA64PFR0_CSV2); + val |= FIELD_PREP(FEATURE(ID_AA64PFR0_CSV2), (u64)vcpu->kvm->arch.pfr0_csv2); + val &= ~FEATURE(ID_AA64PFR0_CSV3); + val |= FIELD_PREP(FEATURE(ID_AA64PFR0_CSV3), (u64)vcpu->kvm->arch.pfr0_csv3); + break; + case SYS_ID_AA64PFR1_EL1: + val &= ~FEATURE(ID_AA64PFR1_MTE); + break; + case SYS_ID_AA64ISAR1_EL1: + if (!vcpu_has_ptrauth(vcpu)) + val &= ~(FEATURE(ID_AA64ISAR1_APA) | + FEATURE(ID_AA64ISAR1_API) | + FEATURE(ID_AA64ISAR1_GPA) | + FEATURE(ID_AA64ISAR1_GPI)); + break; + case SYS_ID_AA64DFR0_EL1: + /* Limit debug to ARMv8.0 */ + val &= ~FEATURE(ID_AA64DFR0_DEBUGVER); + val |= FIELD_PREP(FEATURE(ID_AA64DFR0_DEBUGVER), 6); + /* Limit guests to PMUv3 for ARMv8.4 */ val = cpuid_feature_cap_perfmon_field(val, - ID_AA64DFR0_PMUVER_SHIFT, - cap); - } else if (id == SYS_ID_DFR0_EL1) { - /* Limit guests to PMUv3 for ARMv8.1 */ + ID_AA64DFR0_PMUVER_SHIFT, + kvm_vcpu_has_pmu(vcpu) ? ID_AA64DFR0_PMUVER_8_4 : 0); + break; + case SYS_ID_DFR0_EL1: + /* Limit guests to PMUv3 for ARMv8.4 */ val = cpuid_feature_cap_perfmon_field(val, - ID_DFR0_PERFMON_SHIFT, - ID_DFR0_PERFMON_8_1); + ID_DFR0_PERFMON_SHIFT, + kvm_vcpu_has_pmu(vcpu) ? ID_DFR0_PERFMON_8_4 : 0); + break; } return val; @@ -1493,6 +1505,7 @@ static const struct sys_reg_desc sys_reg_descs[] = { .access = access_pminten, .reg = PMINTENSET_EL1 }, { PMU_SYS_REG(SYS_PMINTENCLR_EL1), .access = access_pminten, .reg = PMINTENSET_EL1 }, + { SYS_DESC(SYS_PMMIR_EL1), trap_raz_wi }, { SYS_DESC(SYS_MAIR_EL1), access_vm_reg, reset_unknown, MAIR_EL1 }, { SYS_DESC(SYS_AMAIR_EL1), access_vm_reg, reset_amair_el1, AMAIR_EL1 }, @@ -1720,7 +1733,7 @@ static const struct sys_reg_desc sys_reg_descs[] = { { SYS_DESC(SYS_FPEXC32_EL2), NULL, reset_val, FPEXC32_EL2, 0x700 }, }; -static bool trap_dbgidr(struct kvm_vcpu *vcpu, +static bool trap_dbgdidr(struct kvm_vcpu *vcpu, struct sys_reg_params *p, const struct sys_reg_desc *r) { @@ -1734,7 +1747,7 @@ static bool trap_dbgidr(struct kvm_vcpu *vcpu, p->regval = ((((dfr >> ID_AA64DFR0_WRPS_SHIFT) & 0xf) << 28) | (((dfr >> ID_AA64DFR0_BRPS_SHIFT) & 0xf) << 24) | (((dfr >> ID_AA64DFR0_CTX_CMPS_SHIFT) & 0xf) << 20) - | (6 << 16) | (el3 << 14) | (el3 << 12)); + | (6 << 16) | (1 << 15) | (el3 << 14) | (el3 << 12)); return true; } } @@ -1767,8 +1780,8 @@ static bool trap_dbgidr(struct kvm_vcpu *vcpu, * guest. Revisit this one day, would this principle change. */ static const struct sys_reg_desc cp14_regs[] = { - /* DBGIDR */ - { Op1( 0), CRn( 0), CRm( 0), Op2( 0), trap_dbgidr }, + /* DBGDIDR */ + { Op1( 0), CRn( 0), CRm( 0), Op2( 0), trap_dbgdidr }, /* DBGDTRRXext */ { Op1( 0), CRn( 0), CRm( 0), Op2( 2), trap_raz_wi }, @@ -1918,8 +1931,8 @@ static const struct sys_reg_desc cp15_regs[] = { { Op1( 0), CRn( 9), CRm(12), Op2( 3), access_pmovs }, { Op1( 0), CRn( 9), CRm(12), Op2( 4), access_pmswinc }, { Op1( 0), CRn( 9), CRm(12), Op2( 5), access_pmselr }, - { Op1( 0), CRn( 9), CRm(12), Op2( 6), access_pmceid }, - { Op1( 0), CRn( 9), CRm(12), Op2( 7), access_pmceid }, + { AA32(LO), Op1( 0), CRn( 9), CRm(12), Op2( 6), access_pmceid }, + { AA32(LO), Op1( 0), CRn( 9), CRm(12), Op2( 7), access_pmceid }, { Op1( 0), CRn( 9), CRm(13), Op2( 0), access_pmu_evcntr }, { Op1( 0), CRn( 9), CRm(13), Op2( 1), access_pmu_evtyper }, { Op1( 0), CRn( 9), CRm(13), Op2( 2), access_pmu_evcntr }, @@ -1927,6 +1940,10 @@ static const struct sys_reg_desc cp15_regs[] = { { Op1( 0), CRn( 9), CRm(14), Op2( 1), access_pminten }, { Op1( 0), CRn( 9), CRm(14), Op2( 2), access_pminten }, { Op1( 0), CRn( 9), CRm(14), Op2( 3), access_pmovs }, + { AA32(HI), Op1( 0), CRn( 9), CRm(14), Op2( 4), access_pmceid }, + { AA32(HI), Op1( 0), CRn( 9), CRm(14), Op2( 5), access_pmceid }, + /* PMMIR */ + { Op1( 0), CRn( 9), CRm(14), Op2( 6), trap_raz_wi }, /* PRRR/MAIR0 */ { AA32(LO), Op1( 0), CRn(10), CRm( 2), Op2( 0), access_vm_reg, NULL, MAIR_EL1 }, diff --git a/arch/arm64/kvm/trng.c b/arch/arm64/kvm/trng.c new file mode 100644 index 000000000000..99bdd7103c9c --- /dev/null +++ b/arch/arm64/kvm/trng.c @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) 2020 Arm Ltd. + +#include <linux/arm-smccc.h> +#include <linux/kvm_host.h> + +#include <asm/kvm_emulate.h> + +#include <kvm/arm_hypercalls.h> + +#define ARM_SMCCC_TRNG_VERSION_1_0 0x10000UL + +/* Those values are deliberately separate from the generic SMCCC definitions. */ +#define TRNG_SUCCESS 0UL +#define TRNG_NOT_SUPPORTED ((unsigned long)-1) +#define TRNG_INVALID_PARAMETER ((unsigned long)-2) +#define TRNG_NO_ENTROPY ((unsigned long)-3) + +#define TRNG_MAX_BITS64 192 + +static const uuid_t arm_smc_trng_uuid __aligned(4) = UUID_INIT( + 0x0d21e000, 0x4384, 0x11eb, 0x80, 0x70, 0x52, 0x44, 0x55, 0x4e, 0x5a, 0x4c); + +static int kvm_trng_do_rnd(struct kvm_vcpu *vcpu, int size) +{ + DECLARE_BITMAP(bits, TRNG_MAX_BITS64); + u32 num_bits = smccc_get_arg1(vcpu); + int i; + + if (num_bits > 3 * size) { + smccc_set_retval(vcpu, TRNG_INVALID_PARAMETER, 0, 0, 0); + return 1; + } + + /* get as many bits as we need to fulfil the request */ + for (i = 0; i < DIV_ROUND_UP(num_bits, BITS_PER_LONG); i++) + bits[i] = get_random_long(); + + bitmap_clear(bits, num_bits, TRNG_MAX_BITS64 - num_bits); + + if (size == 32) + smccc_set_retval(vcpu, TRNG_SUCCESS, lower_32_bits(bits[1]), + upper_32_bits(bits[0]), lower_32_bits(bits[0])); + else + smccc_set_retval(vcpu, TRNG_SUCCESS, bits[2], bits[1], bits[0]); + + memzero_explicit(bits, sizeof(bits)); + return 1; +} + +int kvm_trng_call(struct kvm_vcpu *vcpu) +{ + const __le32 *u = (__le32 *)arm_smc_trng_uuid.b; + u32 func_id = smccc_get_function(vcpu); + unsigned long val = TRNG_NOT_SUPPORTED; + int size = 64; + + switch (func_id) { + case ARM_SMCCC_TRNG_VERSION: + val = ARM_SMCCC_TRNG_VERSION_1_0; + break; + case ARM_SMCCC_TRNG_FEATURES: + switch (smccc_get_arg1(vcpu)) { + case ARM_SMCCC_TRNG_VERSION: + case ARM_SMCCC_TRNG_FEATURES: + case ARM_SMCCC_TRNG_GET_UUID: + case ARM_SMCCC_TRNG_RND32: + case ARM_SMCCC_TRNG_RND64: + val = TRNG_SUCCESS; + } + break; + case ARM_SMCCC_TRNG_GET_UUID: + smccc_set_retval(vcpu, le32_to_cpu(u[0]), le32_to_cpu(u[1]), + le32_to_cpu(u[2]), le32_to_cpu(u[3])); + return 1; + case ARM_SMCCC_TRNG_RND32: + size = 32; + fallthrough; + case ARM_SMCCC_TRNG_RND64: + return kvm_trng_do_rnd(vcpu, size); + } + + smccc_set_retval(vcpu, val, 0, 0, 0); + return 1; +} diff --git a/arch/arm64/kvm/va_layout.c b/arch/arm64/kvm/va_layout.c index 70fcd6a12fe1..978301392d67 100644 --- a/arch/arm64/kvm/va_layout.c +++ b/arch/arm64/kvm/va_layout.c @@ -81,6 +81,34 @@ __init void kvm_compute_layout(void) init_hyp_physvirt_offset(); } +/* + * The .hyp.reloc ELF section contains a list of kimg positions that + * contains kimg VAs but will be accessed only in hyp execution context. + * Convert them to hyp VAs. See gen-hyprel.c for more details. + */ +__init void kvm_apply_hyp_relocations(void) +{ + int32_t *rel; + int32_t *begin = (int32_t *)__hyp_reloc_begin; + int32_t *end = (int32_t *)__hyp_reloc_end; + + for (rel = begin; rel < end; ++rel) { + uintptr_t *ptr, kimg_va; + + /* + * Each entry contains a 32-bit relative offset from itself + * to a kimg VA position. + */ + ptr = (uintptr_t *)lm_alias((char *)rel + *rel); + + /* Read the kimg VA value at the relocation address. */ + kimg_va = *ptr; + + /* Convert to hyp VA and store back to the relocation address. */ + *ptr = __early_kern_hyp_va((uintptr_t)lm_alias(kimg_va)); + } +} + static u32 compute_instruction(int n, u32 rd, u32 rn) { u32 insn = AARCH64_BREAK_FAULT; @@ -255,12 +283,6 @@ static void generate_mov_q(u64 val, __le32 *origptr, __le32 *updptr, int nr_inst *updptr++ = cpu_to_le32(insn); } -void kvm_update_kimg_phys_offset(struct alt_instr *alt, - __le32 *origptr, __le32 *updptr, int nr_inst) -{ - generate_mov_q(kimage_voffset + PHYS_OFFSET, origptr, updptr, nr_inst); -} - void kvm_get_kimage_voffset(struct alt_instr *alt, __le32 *origptr, __le32 *updptr, int nr_inst) { diff --git a/arch/arm64/kvm/vgic/vgic-v3.c b/arch/arm64/kvm/vgic/vgic-v3.c index 52915b342351..6f530925a231 100644 --- a/arch/arm64/kvm/vgic/vgic-v3.c +++ b/arch/arm64/kvm/vgic/vgic-v3.c @@ -574,9 +574,13 @@ early_param("kvm-arm.vgic_v4_enable", early_gicv4_enable); */ int vgic_v3_probe(const struct gic_kvm_info *info) { - u32 ich_vtr_el2 = kvm_call_hyp_ret(__vgic_v3_get_ich_vtr_el2); + u64 ich_vtr_el2 = kvm_call_hyp_ret(__vgic_v3_get_gic_config); + bool has_v2; int ret; + has_v2 = ich_vtr_el2 >> 63; + ich_vtr_el2 = (u32)ich_vtr_el2; + /* * The ListRegs field is 5 bits, but there is an architectural * maximum of 16 list registers. Just ignore bit 4... @@ -594,13 +598,15 @@ int vgic_v3_probe(const struct gic_kvm_info *info) gicv4_enable ? "en" : "dis"); } + kvm_vgic_global_state.vcpu_base = 0; + if (!info->vcpu.start) { kvm_info("GICv3: no GICV resource entry\n"); - kvm_vgic_global_state.vcpu_base = 0; + } else if (!has_v2) { + pr_warn(FW_BUG "CPU interface incapable of MMIO access\n"); } else if (!PAGE_ALIGNED(info->vcpu.start)) { pr_warn("GICV physical address 0x%llx not page aligned\n", (unsigned long long)info->vcpu.start); - kvm_vgic_global_state.vcpu_base = 0; } else { kvm_vgic_global_state.vcpu_base = info->vcpu.start; kvm_vgic_global_state.can_emulate_gicv2 = true; diff --git a/arch/arm64/lib/mte.S b/arch/arm64/lib/mte.S index 9e1a12e10053..351537c12f36 100644 --- a/arch/arm64/lib/mte.S +++ b/arch/arm64/lib/mte.S @@ -149,19 +149,3 @@ SYM_FUNC_START(mte_restore_page_tags) ret SYM_FUNC_END(mte_restore_page_tags) - -/* - * Assign allocation tags for a region of memory based on the pointer tag - * x0 - source pointer - * x1 - size - * - * Note: The address must be non-NULL and MTE_GRANULE_SIZE aligned and - * size must be non-zero and MTE_GRANULE_SIZE aligned. - */ -SYM_FUNC_START(mte_assign_mem_tag_range) -1: stg x0, [x0] - add x0, x0, #MTE_GRANULE_SIZE - subs x1, x1, #MTE_GRANULE_SIZE - b.gt 1b - ret -SYM_FUNC_END(mte_assign_mem_tag_range) diff --git a/arch/arm64/mm/Makefile b/arch/arm64/mm/Makefile index 5ead3c3de3b6..f188c9092696 100644 --- a/arch/arm64/mm/Makefile +++ b/arch/arm64/mm/Makefile @@ -6,7 +6,7 @@ obj-y := dma-mapping.o extable.o fault.o init.o \ obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o obj-$(CONFIG_PTDUMP_CORE) += ptdump.o obj-$(CONFIG_PTDUMP_DEBUGFS) += ptdump_debugfs.o -obj-$(CONFIG_NUMA) += numa.o +obj-$(CONFIG_TRANS_TABLE) += trans_pgd.o obj-$(CONFIG_DEBUG_VIRTUAL) += physaddr.o obj-$(CONFIG_ARM64_MTE) += mteswap.o KASAN_SANITIZE_physaddr.o += n diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index 35d75c60e2b8..f37d4e3830b7 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -10,6 +10,7 @@ #include <linux/acpi.h> #include <linux/bitfield.h> #include <linux/extable.h> +#include <linux/kfence.h> #include <linux/signal.h> #include <linux/mm.h> #include <linux/hardirq.h> @@ -302,12 +303,24 @@ static void die_kernel_fault(const char *msg, unsigned long addr, static void report_tag_fault(unsigned long addr, unsigned int esr, struct pt_regs *regs) { - bool is_write = ((esr & ESR_ELx_WNR) >> ESR_ELx_WNR_SHIFT) != 0; + static bool reported; + bool is_write; + + if (READ_ONCE(reported)) + return; + + /* + * This is used for KASAN tests and assumes that no MTE faults + * happened before running the tests. + */ + if (mte_report_once()) + WRITE_ONCE(reported, true); /* * SAS bits aren't set for all faults reported in EL1, so we can't * find out access size. */ + is_write = !!(esr & ESR_ELx_WNR); kasan_report(addr, 0, is_write, regs->pc); } #else @@ -319,12 +332,8 @@ static inline void report_tag_fault(unsigned long addr, unsigned int esr, static void do_tag_recovery(unsigned long addr, unsigned int esr, struct pt_regs *regs) { - static bool reported; - if (!READ_ONCE(reported)) { - report_tag_fault(addr, esr, regs); - WRITE_ONCE(reported, true); - } + report_tag_fault(addr, esr, regs); /* * Disable MTE Tag Checking on the local CPU for the current EL. @@ -381,6 +390,9 @@ static void __do_kernel_fault(unsigned long addr, unsigned int esr, } else if (addr < PAGE_SIZE) { msg = "NULL pointer dereference"; } else { + if (kfence_handle_page_fault(addr, esr & ESR_ELx_WNR, regs)) + return; + msg = "paging request"; } @@ -564,7 +576,7 @@ retry: mmap_read_lock(mm); } else { /* - * The above down_read_trylock() might have succeeded in which + * The above mmap_read_trylock() might have succeeded in which * case, we'll have missed the might_sleep() from down_read(). */ might_sleep(); @@ -875,44 +887,12 @@ static void debug_exception_exit(struct pt_regs *regs) } NOKPROBE_SYMBOL(debug_exception_exit); -#ifdef CONFIG_ARM64_ERRATUM_1463225 -DECLARE_PER_CPU(int, __in_cortex_a76_erratum_1463225_wa); - -static int cortex_a76_erratum_1463225_debug_handler(struct pt_regs *regs) -{ - if (user_mode(regs)) - return 0; - - if (!__this_cpu_read(__in_cortex_a76_erratum_1463225_wa)) - return 0; - - /* - * We've taken a dummy step exception from the kernel to ensure - * that interrupts are re-enabled on the syscall path. Return back - * to cortex_a76_erratum_1463225_svc_handler() with debug exceptions - * masked so that we can safely restore the mdscr and get on with - * handling the syscall. - */ - regs->pstate |= PSR_D_BIT; - return 1; -} -#else -static int cortex_a76_erratum_1463225_debug_handler(struct pt_regs *regs) -{ - return 0; -} -#endif /* CONFIG_ARM64_ERRATUM_1463225 */ -NOKPROBE_SYMBOL(cortex_a76_erratum_1463225_debug_handler); - void do_debug_exception(unsigned long addr_if_watchpoint, unsigned int esr, struct pt_regs *regs) { const struct fault_info *inf = esr_to_debug_fault_info(esr); unsigned long pc = instruction_pointer(regs); - if (cortex_a76_erratum_1463225_debug_handler(regs)) - return; - debug_exception_enter(regs); if (user_mode(regs) && !is_ttbr0_addr(pc)) diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c index 709d98fea90c..3685e12aba9b 100644 --- a/arch/arm64/mm/init.c +++ b/arch/arm64/mm/init.c @@ -219,17 +219,40 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max) int pfn_valid(unsigned long pfn) { - phys_addr_t addr = pfn << PAGE_SHIFT; + phys_addr_t addr = PFN_PHYS(pfn); - if ((addr >> PAGE_SHIFT) != pfn) + /* + * Ensure the upper PAGE_SHIFT bits are clear in the + * pfn. Else it might lead to false positives when + * some of the upper bits are set, but the lower bits + * match a valid pfn. + */ + if (PHYS_PFN(addr) != pfn) return 0; #ifdef CONFIG_SPARSEMEM +{ + struct mem_section *ms; + if (pfn_to_section_nr(pfn) >= NR_MEM_SECTIONS) return 0; - if (!valid_section(__pfn_to_section(pfn))) + ms = __pfn_to_section(pfn); + if (!valid_section(ms)) return 0; + + /* + * ZONE_DEVICE memory does not have the memblock entries. + * memblock_is_map_memory() check for ZONE_DEVICE based + * addresses will always fail. Even the normal hotplugged + * memory will never have MEMBLOCK_NOMAP flag set in their + * memblock entries. Skip memblock search for all non early + * memory sections covering all of hotplug memory including + * both normal and ZONE_DEVICE based. + */ + if (!early_section(ms)) + return pfn_section_valid(ms, pfn); +} #endif return memblock_is_map_memory(addr); } @@ -416,10 +439,10 @@ void __init bootmem_init(void) max_pfn = max_low_pfn = max; min_low_pfn = min; - arm64_numa_init(); + arch_numa_init(); /* - * must be done after arm64_numa_init() which calls numa_init() to + * must be done after arch_numa_init() which calls numa_init() to * initialize node_online_map that gets used in hugetlb_cma_reserve() * while allocating required CMA size across online nodes. */ diff --git a/arch/arm64/mm/mmap.c b/arch/arm64/mm/mmap.c index 07937b49cb88..a38f54cd638c 100644 --- a/arch/arm64/mm/mmap.c +++ b/arch/arm64/mm/mmap.c @@ -5,20 +5,11 @@ * Copyright (C) 2012 ARM Ltd. */ -#include <linux/elf.h> -#include <linux/fs.h> -#include <linux/memblock.h> -#include <linux/mm.h> -#include <linux/mman.h> -#include <linux/export.h> -#include <linux/shm.h> -#include <linux/sched/signal.h> -#include <linux/sched/mm.h> #include <linux/io.h> -#include <linux/personality.h> -#include <linux/random.h> +#include <linux/memblock.h> +#include <linux/types.h> -#include <asm/cputype.h> +#include <asm/page.h> /* * You really shouldn't be using read() or write() on /dev/mem. This might go diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c index ae0c3d023824..7484ea4f6ba0 100644 --- a/arch/arm64/mm/mmu.c +++ b/arch/arm64/mm/mmu.c @@ -40,7 +40,7 @@ #define NO_BLOCK_MAPPINGS BIT(0) #define NO_CONT_MAPPINGS BIT(1) -u64 idmap_t0sz = TCR_T0SZ(VA_BITS); +u64 idmap_t0sz = TCR_T0SZ(VA_BITS_MIN); u64 idmap_ptrs_per_pgd = PTRS_PER_PGD; u64 __section(".mmuoff.data.write") vabits_actual; @@ -512,7 +512,8 @@ static void __init map_mem(pgd_t *pgdp) * if MTE is present. Otherwise, it has the same attributes as * PAGE_KERNEL. */ - __map_memblock(pgdp, start, end, PAGE_KERNEL_TAGGED, flags); + __map_memblock(pgdp, start, end, pgprot_tagged(PAGE_KERNEL), + flags); } /* @@ -628,7 +629,7 @@ static bool arm64_early_this_cpu_has_bti(void) if (!IS_ENABLED(CONFIG_ARM64_BTI_KERNEL)) return false; - pfr1 = read_sysreg_s(SYS_ID_AA64PFR1_EL1); + pfr1 = __read_sysreg_by_encoding(SYS_ID_AA64PFR1_EL1); return cpuid_feature_extract_unsigned_field(pfr1, ID_AA64PFR1_BT_SHIFT); } @@ -1094,6 +1095,7 @@ static void free_empty_tables(unsigned long addr, unsigned long end, int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node, struct vmem_altmap *altmap) { + WARN_ON((start < VMEMMAP_START) || (end > VMEMMAP_END)); return vmemmap_populate_basepages(start, end, node, altmap); } #else /* !ARM64_SWAPPER_USES_SECTION_MAPS */ @@ -1107,6 +1109,7 @@ int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node, pud_t *pudp; pmd_t *pmdp; + WARN_ON((start < VMEMMAP_START) || (end > VMEMMAP_END)); do { next = pmd_addr_end(addr, end); @@ -1153,7 +1156,7 @@ void vmemmap_free(unsigned long start, unsigned long end, } #endif /* CONFIG_SPARSEMEM_VMEMMAP */ -static inline pud_t * fixmap_pud(unsigned long addr) +static inline pud_t *fixmap_pud(unsigned long addr) { pgd_t *pgdp = pgd_offset_k(addr); p4d_t *p4dp = p4d_offset(pgdp, addr); @@ -1164,7 +1167,7 @@ static inline pud_t * fixmap_pud(unsigned long addr) return pud_offset_kimg(p4dp, addr); } -static inline pmd_t * fixmap_pmd(unsigned long addr) +static inline pmd_t *fixmap_pmd(unsigned long addr) { pud_t *pudp = fixmap_pud(addr); pud_t pud = READ_ONCE(*pudp); @@ -1174,7 +1177,7 @@ static inline pmd_t * fixmap_pmd(unsigned long addr) return pmd_offset_kimg(pudp, addr); } -static inline pte_t * fixmap_pte(unsigned long addr) +static inline pte_t *fixmap_pte(unsigned long addr) { return &bm_pte[pte_index(addr)]; } @@ -1442,16 +1445,19 @@ static void __remove_pgd_mapping(pgd_t *pgdir, unsigned long start, u64 size) free_empty_tables(start, end, PAGE_OFFSET, PAGE_END); } -static bool inside_linear_region(u64 start, u64 size) +struct range arch_get_mappable_range(void) { + struct range mhp_range; + /* * Linear mapping region is the range [PAGE_OFFSET..(PAGE_END - 1)] * accommodating both its ends but excluding PAGE_END. Max physical * range which can be mapped inside this linear mapping range, must * also be derived from its end points. */ - return start >= __pa(_PAGE_OFFSET(vabits_actual)) && - (start + size - 1) <= __pa(PAGE_END - 1); + mhp_range.start = __pa(_PAGE_OFFSET(vabits_actual)); + mhp_range.end = __pa(PAGE_END - 1); + return mhp_range; } int arch_add_memory(int nid, u64 start, u64 size, @@ -1459,12 +1465,14 @@ int arch_add_memory(int nid, u64 start, u64 size, { int ret, flags = 0; - if (!inside_linear_region(start, size)) { - pr_err("[%llx %llx] is outside linear mapping region\n", start, start + size); - return -EINVAL; - } + VM_BUG_ON(!mhp_range_allowed(start, size, true)); - if (rodata_full || debug_pagealloc_enabled()) + /* + * KFENCE requires linear map to be mapped at page granularity, so that + * it is possible to protect/unprotect single pages in the KFENCE pool. + */ + if (rodata_full || debug_pagealloc_enabled() || + IS_ENABLED(CONFIG_KFENCE)) flags = NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS; __create_pgd_mapping(swapper_pg_dir, start, __phys_to_virt(start), diff --git a/arch/arm64/mm/numa.c b/arch/arm64/mm/numa.c deleted file mode 100644 index a8303bc6b62a..000000000000 --- a/arch/arm64/mm/numa.c +++ /dev/null @@ -1,464 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * NUMA support, based on the x86 implementation. - * - * Copyright (C) 2015 Cavium Inc. - * Author: Ganapatrao Kulkarni <gkulkarni@cavium.com> - */ - -#define pr_fmt(fmt) "NUMA: " fmt - -#include <linux/acpi.h> -#include <linux/memblock.h> -#include <linux/module.h> -#include <linux/of.h> - -#include <asm/acpi.h> -#include <asm/sections.h> - -struct pglist_data *node_data[MAX_NUMNODES] __read_mostly; -EXPORT_SYMBOL(node_data); -nodemask_t numa_nodes_parsed __initdata; -static int cpu_to_node_map[NR_CPUS] = { [0 ... NR_CPUS-1] = NUMA_NO_NODE }; - -static int numa_distance_cnt; -static u8 *numa_distance; -bool numa_off; - -static __init int numa_parse_early_param(char *opt) -{ - if (!opt) - return -EINVAL; - if (str_has_prefix(opt, "off")) - numa_off = true; - - return 0; -} -early_param("numa", numa_parse_early_param); - -cpumask_var_t node_to_cpumask_map[MAX_NUMNODES]; -EXPORT_SYMBOL(node_to_cpumask_map); - -#ifdef CONFIG_DEBUG_PER_CPU_MAPS - -/* - * Returns a pointer to the bitmask of CPUs on Node 'node'. - */ -const struct cpumask *cpumask_of_node(int node) -{ - - if (node == NUMA_NO_NODE) - return cpu_all_mask; - - if (WARN_ON(node < 0 || node >= nr_node_ids)) - return cpu_none_mask; - - if (WARN_ON(node_to_cpumask_map[node] == NULL)) - return cpu_online_mask; - - return node_to_cpumask_map[node]; -} -EXPORT_SYMBOL(cpumask_of_node); - -#endif - -static void numa_update_cpu(unsigned int cpu, bool remove) -{ - int nid = cpu_to_node(cpu); - - if (nid == NUMA_NO_NODE) - return; - - if (remove) - cpumask_clear_cpu(cpu, node_to_cpumask_map[nid]); - else - cpumask_set_cpu(cpu, node_to_cpumask_map[nid]); -} - -void numa_add_cpu(unsigned int cpu) -{ - numa_update_cpu(cpu, false); -} - -void numa_remove_cpu(unsigned int cpu) -{ - numa_update_cpu(cpu, true); -} - -void numa_clear_node(unsigned int cpu) -{ - numa_remove_cpu(cpu); - set_cpu_numa_node(cpu, NUMA_NO_NODE); -} - -/* - * Allocate node_to_cpumask_map based on number of available nodes - * Requires node_possible_map to be valid. - * - * Note: cpumask_of_node() is not valid until after this is done. - * (Use CONFIG_DEBUG_PER_CPU_MAPS to check this.) - */ -static void __init setup_node_to_cpumask_map(void) -{ - int node; - - /* setup nr_node_ids if not done yet */ - if (nr_node_ids == MAX_NUMNODES) - setup_nr_node_ids(); - - /* allocate and clear the mapping */ - for (node = 0; node < nr_node_ids; node++) { - alloc_bootmem_cpumask_var(&node_to_cpumask_map[node]); - cpumask_clear(node_to_cpumask_map[node]); - } - - /* cpumask_of_node() will now work */ - pr_debug("Node to cpumask map for %u nodes\n", nr_node_ids); -} - -/* - * Set the cpu to node and mem mapping - */ -void numa_store_cpu_info(unsigned int cpu) -{ - set_cpu_numa_node(cpu, cpu_to_node_map[cpu]); -} - -void __init early_map_cpu_to_node(unsigned int cpu, int nid) -{ - /* fallback to node 0 */ - if (nid < 0 || nid >= MAX_NUMNODES || numa_off) - nid = 0; - - cpu_to_node_map[cpu] = nid; - - /* - * We should set the numa node of cpu0 as soon as possible, because it - * has already been set up online before. cpu_to_node(0) will soon be - * called. - */ - if (!cpu) - set_cpu_numa_node(cpu, nid); -} - -#ifdef CONFIG_HAVE_SETUP_PER_CPU_AREA -unsigned long __per_cpu_offset[NR_CPUS] __read_mostly; -EXPORT_SYMBOL(__per_cpu_offset); - -static int __init early_cpu_to_node(int cpu) -{ - return cpu_to_node_map[cpu]; -} - -static int __init pcpu_cpu_distance(unsigned int from, unsigned int to) -{ - return node_distance(early_cpu_to_node(from), early_cpu_to_node(to)); -} - -static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size, - size_t align) -{ - int nid = early_cpu_to_node(cpu); - - return memblock_alloc_try_nid(size, align, - __pa(MAX_DMA_ADDRESS), MEMBLOCK_ALLOC_ACCESSIBLE, nid); -} - -static void __init pcpu_fc_free(void *ptr, size_t size) -{ - memblock_free_early(__pa(ptr), size); -} - -void __init setup_per_cpu_areas(void) -{ - unsigned long delta; - unsigned int cpu; - int rc; - - /* - * Always reserve area for module percpu variables. That's - * what the legacy allocator did. - */ - rc = pcpu_embed_first_chunk(PERCPU_MODULE_RESERVE, - PERCPU_DYNAMIC_RESERVE, PAGE_SIZE, - pcpu_cpu_distance, - pcpu_fc_alloc, pcpu_fc_free); - if (rc < 0) - panic("Failed to initialize percpu areas."); - - delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start; - for_each_possible_cpu(cpu) - __per_cpu_offset[cpu] = delta + pcpu_unit_offsets[cpu]; -} -#endif - -/** - * numa_add_memblk() - Set node id to memblk - * @nid: NUMA node ID of the new memblk - * @start: Start address of the new memblk - * @end: End address of the new memblk - * - * RETURNS: - * 0 on success, -errno on failure. - */ -int __init numa_add_memblk(int nid, u64 start, u64 end) -{ - int ret; - - ret = memblock_set_node(start, (end - start), &memblock.memory, nid); - if (ret < 0) { - pr_err("memblock [0x%llx - 0x%llx] failed to add on node %d\n", - start, (end - 1), nid); - return ret; - } - - node_set(nid, numa_nodes_parsed); - return ret; -} - -/* - * Initialize NODE_DATA for a node on the local memory - */ -static void __init setup_node_data(int nid, u64 start_pfn, u64 end_pfn) -{ - const size_t nd_size = roundup(sizeof(pg_data_t), SMP_CACHE_BYTES); - u64 nd_pa; - void *nd; - int tnid; - - if (start_pfn >= end_pfn) - pr_info("Initmem setup node %d [<memory-less node>]\n", nid); - - nd_pa = memblock_phys_alloc_try_nid(nd_size, SMP_CACHE_BYTES, nid); - if (!nd_pa) - panic("Cannot allocate %zu bytes for node %d data\n", - nd_size, nid); - - nd = __va(nd_pa); - - /* report and initialize */ - pr_info("NODE_DATA [mem %#010Lx-%#010Lx]\n", - nd_pa, nd_pa + nd_size - 1); - tnid = early_pfn_to_nid(nd_pa >> PAGE_SHIFT); - if (tnid != nid) - pr_info("NODE_DATA(%d) on node %d\n", nid, tnid); - - node_data[nid] = nd; - memset(NODE_DATA(nid), 0, sizeof(pg_data_t)); - NODE_DATA(nid)->node_id = nid; - NODE_DATA(nid)->node_start_pfn = start_pfn; - NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn; -} - -/* - * numa_free_distance - * - * The current table is freed. - */ -void __init numa_free_distance(void) -{ - size_t size; - - if (!numa_distance) - return; - - size = numa_distance_cnt * numa_distance_cnt * - sizeof(numa_distance[0]); - - memblock_free(__pa(numa_distance), size); - numa_distance_cnt = 0; - numa_distance = NULL; -} - -/* - * Create a new NUMA distance table. - */ -static int __init numa_alloc_distance(void) -{ - size_t size; - u64 phys; - int i, j; - - size = nr_node_ids * nr_node_ids * sizeof(numa_distance[0]); - phys = memblock_find_in_range(0, PFN_PHYS(max_pfn), - size, PAGE_SIZE); - if (WARN_ON(!phys)) - return -ENOMEM; - - memblock_reserve(phys, size); - - numa_distance = __va(phys); - numa_distance_cnt = nr_node_ids; - - /* fill with the default distances */ - for (i = 0; i < numa_distance_cnt; i++) - for (j = 0; j < numa_distance_cnt; j++) - numa_distance[i * numa_distance_cnt + j] = i == j ? - LOCAL_DISTANCE : REMOTE_DISTANCE; - - pr_debug("Initialized distance table, cnt=%d\n", numa_distance_cnt); - - return 0; -} - -/** - * numa_set_distance() - Set inter node NUMA distance from node to node. - * @from: the 'from' node to set distance - * @to: the 'to' node to set distance - * @distance: NUMA distance - * - * Set the distance from node @from to @to to @distance. - * If distance table doesn't exist, a warning is printed. - * - * If @from or @to is higher than the highest known node or lower than zero - * or @distance doesn't make sense, the call is ignored. - */ -void __init numa_set_distance(int from, int to, int distance) -{ - if (!numa_distance) { - pr_warn_once("Warning: distance table not allocated yet\n"); - return; - } - - if (from >= numa_distance_cnt || to >= numa_distance_cnt || - from < 0 || to < 0) { - pr_warn_once("Warning: node ids are out of bound, from=%d to=%d distance=%d\n", - from, to, distance); - return; - } - - if ((u8)distance != distance || - (from == to && distance != LOCAL_DISTANCE)) { - pr_warn_once("Warning: invalid distance parameter, from=%d to=%d distance=%d\n", - from, to, distance); - return; - } - - numa_distance[from * numa_distance_cnt + to] = distance; -} - -/* - * Return NUMA distance @from to @to - */ -int __node_distance(int from, int to) -{ - if (from >= numa_distance_cnt || to >= numa_distance_cnt) - return from == to ? LOCAL_DISTANCE : REMOTE_DISTANCE; - return numa_distance[from * numa_distance_cnt + to]; -} -EXPORT_SYMBOL(__node_distance); - -static int __init numa_register_nodes(void) -{ - int nid; - struct memblock_region *mblk; - - /* Check that valid nid is set to memblks */ - for_each_mem_region(mblk) { - int mblk_nid = memblock_get_region_node(mblk); - - if (mblk_nid == NUMA_NO_NODE || mblk_nid >= MAX_NUMNODES) { - pr_warn("Warning: invalid memblk node %d [mem %#010Lx-%#010Lx]\n", - mblk_nid, mblk->base, - mblk->base + mblk->size - 1); - return -EINVAL; - } - } - - /* Finally register nodes. */ - for_each_node_mask(nid, numa_nodes_parsed) { - unsigned long start_pfn, end_pfn; - - get_pfn_range_for_nid(nid, &start_pfn, &end_pfn); - setup_node_data(nid, start_pfn, end_pfn); - node_set_online(nid); - } - - /* Setup online nodes to actual nodes*/ - node_possible_map = numa_nodes_parsed; - - return 0; -} - -static int __init numa_init(int (*init_func)(void)) -{ - int ret; - - nodes_clear(numa_nodes_parsed); - nodes_clear(node_possible_map); - nodes_clear(node_online_map); - - ret = numa_alloc_distance(); - if (ret < 0) - return ret; - - ret = init_func(); - if (ret < 0) - goto out_free_distance; - - if (nodes_empty(numa_nodes_parsed)) { - pr_info("No NUMA configuration found\n"); - ret = -EINVAL; - goto out_free_distance; - } - - ret = numa_register_nodes(); - if (ret < 0) - goto out_free_distance; - - setup_node_to_cpumask_map(); - - return 0; -out_free_distance: - numa_free_distance(); - return ret; -} - -/** - * dummy_numa_init() - Fallback dummy NUMA init - * - * Used if there's no underlying NUMA architecture, NUMA initialization - * fails, or NUMA is disabled on the command line. - * - * Must online at least one node (node 0) and add memory blocks that cover all - * allowed memory. It is unlikely that this function fails. - * - * Return: 0 on success, -errno on failure. - */ -static int __init dummy_numa_init(void) -{ - phys_addr_t start = memblock_start_of_DRAM(); - phys_addr_t end = memblock_end_of_DRAM(); - int ret; - - if (numa_off) - pr_info("NUMA disabled\n"); /* Forced off on command line. */ - pr_info("Faking a node at [mem %#018Lx-%#018Lx]\n", start, end - 1); - - ret = numa_add_memblk(0, start, end); - if (ret) { - pr_err("NUMA init failed\n"); - return ret; - } - - numa_off = true; - return 0; -} - -/** - * arm64_numa_init() - Initialize NUMA - * - * Try each configured NUMA initialization method until one succeeds. The - * last fallback is dummy single node config encompassing whole memory. - */ -void __init arm64_numa_init(void) -{ - if (!numa_off) { - if (!acpi_disabled && !numa_init(arm64_acpi_numa_init)) - return; - if (acpi_disabled && !numa_init(of_numa_init)) - return; - } - - numa_init(dummy_numa_init); -} diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S index 1f7ee8c8b7b8..c967bfd30d2b 100644 --- a/arch/arm64/mm/proc.S +++ b/arch/arm64/mm/proc.S @@ -291,17 +291,7 @@ skip_pgd: /* We're done: fire up the MMU again */ mrs x17, sctlr_el1 orr x17, x17, #SCTLR_ELx_M - msr sctlr_el1, x17 - isb - - /* - * Invalidate the local I-cache so that any instructions fetched - * speculatively from the PoC are discarded, since they may have - * been dynamically patched at the PoU. - */ - ic iallu - dsb nsh - isb + set_sctlr_el1 x17 /* Set the flag to zero to indicate that we're all done */ str wzr, [flag_ptr] @@ -464,8 +454,8 @@ SYM_FUNC_START(__cpu_setup) #endif msr mair_el1, x5 /* - * Set/prepare TCR and TTBR. We use 512GB (39-bit) address range for - * both user and kernel. + * Set/prepare TCR and TTBR. TCR_EL1.T1SZ gets further + * adjusted if the kernel is compiled with 52bit VA support. */ mov_q x10, TCR_TxSZ(VA_BITS) | TCR_CACHE_FLAGS | TCR_SMP_FLAGS | \ TCR_TG_FLAGS | TCR_KASLR_FLAGS | TCR_ASID16 | \ diff --git a/arch/arm64/mm/ptdump.c b/arch/arm64/mm/ptdump.c index 04137a8f3d2d..0e050d76b83a 100644 --- a/arch/arm64/mm/ptdump.c +++ b/arch/arm64/mm/ptdump.c @@ -324,6 +324,7 @@ void ptdump_walk(struct seq_file *s, struct ptdump_info *info) st = (struct pg_state){ .seq = s, .marker = info->markers, + .level = -1, .ptdump = { .note_page = note_page, .range = (struct ptdump_range[]){ diff --git a/arch/arm64/mm/trans_pgd.c b/arch/arm64/mm/trans_pgd.c new file mode 100644 index 000000000000..527f0a39c3da --- /dev/null +++ b/arch/arm64/mm/trans_pgd.c @@ -0,0 +1,324 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* + * Transitional page tables for kexec and hibernate + * + * This file derived from: arch/arm64/kernel/hibernate.c + * + * Copyright (c) 2020, Microsoft Corporation. + * Pavel Tatashin <pasha.tatashin@soleen.com> + * + */ + +/* + * Transitional tables are used during system transferring from one world to + * another: such as during hibernate restore, and kexec reboots. During these + * phases one cannot rely on page table not being overwritten. This is because + * hibernate and kexec can overwrite the current page tables during transition. + */ + +#include <asm/trans_pgd.h> +#include <asm/pgalloc.h> +#include <asm/pgtable.h> +#include <linux/suspend.h> +#include <linux/bug.h> +#include <linux/mm.h> +#include <linux/mmzone.h> + +static void *trans_alloc(struct trans_pgd_info *info) +{ + return info->trans_alloc_page(info->trans_alloc_arg); +} + +static void _copy_pte(pte_t *dst_ptep, pte_t *src_ptep, unsigned long addr) +{ + pte_t pte = READ_ONCE(*src_ptep); + + if (pte_valid(pte)) { + /* + * Resume will overwrite areas that may be marked + * read only (code, rodata). Clear the RDONLY bit from + * the temporary mappings we use during restore. + */ + set_pte(dst_ptep, pte_mkwrite(pte)); + } else if (debug_pagealloc_enabled() && !pte_none(pte)) { + /* + * debug_pagealloc will removed the PTE_VALID bit if + * the page isn't in use by the resume kernel. It may have + * been in use by the original kernel, in which case we need + * to put it back in our copy to do the restore. + * + * Before marking this entry valid, check the pfn should + * be mapped. + */ + BUG_ON(!pfn_valid(pte_pfn(pte))); + + set_pte(dst_ptep, pte_mkpresent(pte_mkwrite(pte))); + } +} + +static int copy_pte(struct trans_pgd_info *info, pmd_t *dst_pmdp, + pmd_t *src_pmdp, unsigned long start, unsigned long end) +{ + pte_t *src_ptep; + pte_t *dst_ptep; + unsigned long addr = start; + + dst_ptep = trans_alloc(info); + if (!dst_ptep) + return -ENOMEM; + pmd_populate_kernel(NULL, dst_pmdp, dst_ptep); + dst_ptep = pte_offset_kernel(dst_pmdp, start); + + src_ptep = pte_offset_kernel(src_pmdp, start); + do { + _copy_pte(dst_ptep, src_ptep, addr); + } while (dst_ptep++, src_ptep++, addr += PAGE_SIZE, addr != end); + + return 0; +} + +static int copy_pmd(struct trans_pgd_info *info, pud_t *dst_pudp, + pud_t *src_pudp, unsigned long start, unsigned long end) +{ + pmd_t *src_pmdp; + pmd_t *dst_pmdp; + unsigned long next; + unsigned long addr = start; + + if (pud_none(READ_ONCE(*dst_pudp))) { + dst_pmdp = trans_alloc(info); + if (!dst_pmdp) + return -ENOMEM; + pud_populate(NULL, dst_pudp, dst_pmdp); + } + dst_pmdp = pmd_offset(dst_pudp, start); + + src_pmdp = pmd_offset(src_pudp, start); + do { + pmd_t pmd = READ_ONCE(*src_pmdp); + + next = pmd_addr_end(addr, end); + if (pmd_none(pmd)) + continue; + if (pmd_table(pmd)) { + if (copy_pte(info, dst_pmdp, src_pmdp, addr, next)) + return -ENOMEM; + } else { + set_pmd(dst_pmdp, + __pmd(pmd_val(pmd) & ~PMD_SECT_RDONLY)); + } + } while (dst_pmdp++, src_pmdp++, addr = next, addr != end); + + return 0; +} + +static int copy_pud(struct trans_pgd_info *info, p4d_t *dst_p4dp, + p4d_t *src_p4dp, unsigned long start, + unsigned long end) +{ + pud_t *dst_pudp; + pud_t *src_pudp; + unsigned long next; + unsigned long addr = start; + + if (p4d_none(READ_ONCE(*dst_p4dp))) { + dst_pudp = trans_alloc(info); + if (!dst_pudp) + return -ENOMEM; + p4d_populate(NULL, dst_p4dp, dst_pudp); + } + dst_pudp = pud_offset(dst_p4dp, start); + + src_pudp = pud_offset(src_p4dp, start); + do { + pud_t pud = READ_ONCE(*src_pudp); + + next = pud_addr_end(addr, end); + if (pud_none(pud)) + continue; + if (pud_table(pud)) { + if (copy_pmd(info, dst_pudp, src_pudp, addr, next)) + return -ENOMEM; + } else { + set_pud(dst_pudp, + __pud(pud_val(pud) & ~PUD_SECT_RDONLY)); + } + } while (dst_pudp++, src_pudp++, addr = next, addr != end); + + return 0; +} + +static int copy_p4d(struct trans_pgd_info *info, pgd_t *dst_pgdp, + pgd_t *src_pgdp, unsigned long start, + unsigned long end) +{ + p4d_t *dst_p4dp; + p4d_t *src_p4dp; + unsigned long next; + unsigned long addr = start; + + dst_p4dp = p4d_offset(dst_pgdp, start); + src_p4dp = p4d_offset(src_pgdp, start); + do { + next = p4d_addr_end(addr, end); + if (p4d_none(READ_ONCE(*src_p4dp))) + continue; + if (copy_pud(info, dst_p4dp, src_p4dp, addr, next)) + return -ENOMEM; + } while (dst_p4dp++, src_p4dp++, addr = next, addr != end); + + return 0; +} + +static int copy_page_tables(struct trans_pgd_info *info, pgd_t *dst_pgdp, + unsigned long start, unsigned long end) +{ + unsigned long next; + unsigned long addr = start; + pgd_t *src_pgdp = pgd_offset_k(start); + + dst_pgdp = pgd_offset_pgd(dst_pgdp, start); + do { + next = pgd_addr_end(addr, end); + if (pgd_none(READ_ONCE(*src_pgdp))) + continue; + if (copy_p4d(info, dst_pgdp, src_pgdp, addr, next)) + return -ENOMEM; + } while (dst_pgdp++, src_pgdp++, addr = next, addr != end); + + return 0; +} + +/* + * Create trans_pgd and copy linear map. + * info: contains allocator and its argument + * dst_pgdp: new page table that is created, and to which map is copied. + * start: Start of the interval (inclusive). + * end: End of the interval (exclusive). + * + * Returns 0 on success, and -ENOMEM on failure. + */ +int trans_pgd_create_copy(struct trans_pgd_info *info, pgd_t **dst_pgdp, + unsigned long start, unsigned long end) +{ + int rc; + pgd_t *trans_pgd = trans_alloc(info); + + if (!trans_pgd) { + pr_err("Failed to allocate memory for temporary page tables.\n"); + return -ENOMEM; + } + + rc = copy_page_tables(info, trans_pgd, start, end); + if (!rc) + *dst_pgdp = trans_pgd; + + return rc; +} + +/* + * Add map entry to trans_pgd for a base-size page at PTE level. + * info: contains allocator and its argument + * trans_pgd: page table in which new map is added. + * page: page to be mapped. + * dst_addr: new VA address for the page + * pgprot: protection for the page. + * + * Returns 0 on success, and -ENOMEM on failure. + */ +int trans_pgd_map_page(struct trans_pgd_info *info, pgd_t *trans_pgd, + void *page, unsigned long dst_addr, pgprot_t pgprot) +{ + pgd_t *pgdp; + p4d_t *p4dp; + pud_t *pudp; + pmd_t *pmdp; + pte_t *ptep; + + pgdp = pgd_offset_pgd(trans_pgd, dst_addr); + if (pgd_none(READ_ONCE(*pgdp))) { + p4dp = trans_alloc(info); + if (!pgdp) + return -ENOMEM; + pgd_populate(NULL, pgdp, p4dp); + } + + p4dp = p4d_offset(pgdp, dst_addr); + if (p4d_none(READ_ONCE(*p4dp))) { + pudp = trans_alloc(info); + if (!pudp) + return -ENOMEM; + p4d_populate(NULL, p4dp, pudp); + } + + pudp = pud_offset(p4dp, dst_addr); + if (pud_none(READ_ONCE(*pudp))) { + pmdp = trans_alloc(info); + if (!pmdp) + return -ENOMEM; + pud_populate(NULL, pudp, pmdp); + } + + pmdp = pmd_offset(pudp, dst_addr); + if (pmd_none(READ_ONCE(*pmdp))) { + ptep = trans_alloc(info); + if (!ptep) + return -ENOMEM; + pmd_populate_kernel(NULL, pmdp, ptep); + } + + ptep = pte_offset_kernel(pmdp, dst_addr); + set_pte(ptep, pfn_pte(virt_to_pfn(page), pgprot)); + + return 0; +} + +/* + * The page we want to idmap may be outside the range covered by VA_BITS that + * can be built using the kernel's p?d_populate() helpers. As a one off, for a + * single page, we build these page tables bottom up and just assume that will + * need the maximum T0SZ. + * + * Returns 0 on success, and -ENOMEM on failure. + * On success trans_ttbr0 contains page table with idmapped page, t0sz is set to + * maximum T0SZ for this page. + */ +int trans_pgd_idmap_page(struct trans_pgd_info *info, phys_addr_t *trans_ttbr0, + unsigned long *t0sz, void *page) +{ + phys_addr_t dst_addr = virt_to_phys(page); + unsigned long pfn = __phys_to_pfn(dst_addr); + int max_msb = (dst_addr & GENMASK(52, 48)) ? 51 : 47; + int bits_mapped = PAGE_SHIFT - 4; + unsigned long level_mask, prev_level_entry, *levels[4]; + int this_level, index, level_lsb, level_msb; + + dst_addr &= PAGE_MASK; + prev_level_entry = pte_val(pfn_pte(pfn, PAGE_KERNEL_EXEC)); + + for (this_level = 3; this_level >= 0; this_level--) { + levels[this_level] = trans_alloc(info); + if (!levels[this_level]) + return -ENOMEM; + + level_lsb = ARM64_HW_PGTABLE_LEVEL_SHIFT(this_level); + level_msb = min(level_lsb + bits_mapped, max_msb); + level_mask = GENMASK_ULL(level_msb, level_lsb); + + index = (dst_addr & level_mask) >> level_lsb; + *(levels[this_level] + index) = prev_level_entry; + + pfn = virt_to_pfn(levels[this_level]); + prev_level_entry = pte_val(pfn_pte(pfn, + __pgprot(PMD_TYPE_TABLE))); + + if (level_msb == max_msb) + break; + } + + *trans_ttbr0 = phys_to_ttbr(__pfn_to_phys(pfn)); + *t0sz = TCR_T0SZ(max_msb + 1); + + return 0; +} diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c index ef9f1d5e989d..f7b194878a99 100644 --- a/arch/arm64/net/bpf_jit_comp.c +++ b/arch/arm64/net/bpf_jit_comp.c @@ -875,10 +875,18 @@ emit_cond_jmp: } break; - /* STX XADD: lock *(u32 *)(dst + off) += src */ - case BPF_STX | BPF_XADD | BPF_W: - /* STX XADD: lock *(u64 *)(dst + off) += src */ - case BPF_STX | BPF_XADD | BPF_DW: + case BPF_STX | BPF_ATOMIC | BPF_W: + case BPF_STX | BPF_ATOMIC | BPF_DW: + if (insn->imm != BPF_ADD) { + pr_err_once("unknown atomic op code %02x\n", insn->imm); + return -EINVAL; + } + + /* STX XADD: lock *(u32 *)(dst + off) += src + * and + * STX XADD: lock *(u64 *)(dst + off) += src + */ + if (!off) { reg = dst; } else { |