diff options
Diffstat (limited to 'arch/arm')
83 files changed, 2408 insertions, 787 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 7980873525b2..6d6e18fee9fe 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -38,7 +38,6 @@ config ARM select HARDIRQS_SW_RESEND select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW - select GENERIC_IRQ_PROBE select ARCH_WANT_IPC_PARSE_VERSION select HARDIRQS_SW_RESEND select CPU_PM if (SUSPEND || CPU_IDLE) @@ -126,11 +125,6 @@ config TRACE_IRQFLAGS_SUPPORT bool default y -config GENERIC_LOCKBREAK - bool - default y - depends on SMP && PREEMPT - config RWSEM_GENERIC_SPINLOCK bool default y @@ -1151,6 +1145,7 @@ config PLAT_ORION bool select CLKSRC_MMIO select GENERIC_IRQ_CHIP + select IRQ_DOMAIN select COMMON_CLK config PLAT_PXA diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index e1fa7e6edfe8..71d6b5d0daf1 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -12,7 +12,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. * - * Contains definitions specific to the Armada 370 SoC that are not + * Contains definitions specific to the Armada XP SoC that are not * common to all Armada SoCs. */ diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index a874dbfb5ae6..e6138310e5ce 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -51,11 +51,11 @@ dma-apbh@80004000 { compatible = "fsl,imx23-dma-apbh"; - reg = <0x80004000 2000>; + reg = <0x80004000 0x2000>; }; ecc@80008000 { - reg = <0x80008000 2000>; + reg = <0x80008000 0x2000>; status = "disabled"; }; @@ -63,7 +63,7 @@ compatible = "fsl,imx23-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; - reg = <0x8000c000 2000>, <0x8000a000 2000>; + reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>; reg-names = "gpmi-nand", "bch"; interrupts = <13>, <56>; interrupt-names = "gpmi-dma", "bch"; @@ -72,14 +72,14 @@ }; ssp0: ssp@80010000 { - reg = <0x80010000 2000>; + reg = <0x80010000 0x2000>; interrupts = <15 14>; fsl,ssp-dma-channel = <1>; status = "disabled"; }; etm@80014000 { - reg = <0x80014000 2000>; + reg = <0x80014000 0x2000>; status = "disabled"; }; @@ -87,7 +87,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx23-pinctrl", "simple-bus"; - reg = <0x80018000 2000>; + reg = <0x80018000 0x2000>; gpio0: gpio@0 { compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; @@ -273,32 +273,32 @@ }; emi@80020000 { - reg = <0x80020000 2000>; + reg = <0x80020000 0x2000>; status = "disabled"; }; dma-apbx@80024000 { compatible = "fsl,imx23-dma-apbx"; - reg = <0x80024000 2000>; + reg = <0x80024000 0x2000>; }; dcp@80028000 { - reg = <0x80028000 2000>; + reg = <0x80028000 0x2000>; status = "disabled"; }; pxp@8002a000 { - reg = <0x8002a000 2000>; + reg = <0x8002a000 0x2000>; status = "disabled"; }; ocotp@8002c000 { - reg = <0x8002c000 2000>; + reg = <0x8002c000 0x2000>; status = "disabled"; }; axi-ahb@8002e000 { - reg = <0x8002e000 2000>; + reg = <0x8002e000 0x2000>; status = "disabled"; }; @@ -310,14 +310,14 @@ }; ssp1: ssp@80034000 { - reg = <0x80034000 2000>; + reg = <0x80034000 0x2000>; interrupts = <2 20>; fsl,ssp-dma-channel = <2>; status = "disabled"; }; tvenc@80038000 { - reg = <0x80038000 2000>; + reg = <0x80038000 0x2000>; status = "disabled"; }; }; @@ -330,37 +330,37 @@ ranges; clkctl@80040000 { - reg = <0x80040000 2000>; + reg = <0x80040000 0x2000>; status = "disabled"; }; saif0: saif@80042000 { - reg = <0x80042000 2000>; + reg = <0x80042000 0x2000>; status = "disabled"; }; power@80044000 { - reg = <0x80044000 2000>; + reg = <0x80044000 0x2000>; status = "disabled"; }; saif1: saif@80046000 { - reg = <0x80046000 2000>; + reg = <0x80046000 0x2000>; status = "disabled"; }; audio-out@80048000 { - reg = <0x80048000 2000>; + reg = <0x80048000 0x2000>; status = "disabled"; }; audio-in@8004c000 { - reg = <0x8004c000 2000>; + reg = <0x8004c000 0x2000>; status = "disabled"; }; lradc@80050000 { - reg = <0x80050000 2000>; + reg = <0x80050000 0x2000>; status = "disabled"; }; @@ -370,26 +370,26 @@ }; i2c@80058000 { - reg = <0x80058000 2000>; + reg = <0x80058000 0x2000>; status = "disabled"; }; rtc@8005c000 { compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc"; - reg = <0x8005c000 2000>; + reg = <0x8005c000 0x2000>; interrupts = <22>; }; pwm: pwm@80064000 { compatible = "fsl,imx23-pwm"; - reg = <0x80064000 2000>; + reg = <0x80064000 0x2000>; #pwm-cells = <2>; fsl,pwm-number = <5>; status = "disabled"; }; timrot@80068000 { - reg = <0x80068000 2000>; + reg = <0x80068000 0x2000>; status = "disabled"; }; @@ -429,7 +429,7 @@ ranges; usbctrl@80080000 { - reg = <0x80080000 0x10000>; + reg = <0x80080000 0x40000>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx27-3ds.dts b/arch/arm/boot/dts/imx27-3ds.dts index d3f8296e19e0..0a8978a40ece 100644 --- a/arch/arm/boot/dts/imx27-3ds.dts +++ b/arch/arm/boot/dts/imx27-3ds.dts @@ -27,7 +27,7 @@ status = "okay"; }; - uart@1000a000 { + uart1: serial@1000a000 { fsl,uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 00bae3aad5ab..5303ab680a34 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -19,6 +19,12 @@ serial3 = &uart4; serial4 = &uart5; serial5 = &uart6; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; }; avic: avic-interrupt-controller@e0000000 { diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 787efac68da8..3fa6d190fab4 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -57,18 +57,18 @@ }; hsadc@80002000 { - reg = <0x80002000 2000>; + reg = <0x80002000 0x2000>; interrupts = <13 87>; status = "disabled"; }; dma-apbh@80004000 { compatible = "fsl,imx28-dma-apbh"; - reg = <0x80004000 2000>; + reg = <0x80004000 0x2000>; }; perfmon@80006000 { - reg = <0x80006000 800>; + reg = <0x80006000 0x800>; interrupts = <27>; status = "disabled"; }; @@ -77,7 +77,7 @@ compatible = "fsl,imx28-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; - reg = <0x8000c000 2000>, <0x8000a000 2000>; + reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>; reg-names = "gpmi-nand", "bch"; interrupts = <88>, <41>; interrupt-names = "gpmi-dma", "bch"; @@ -86,28 +86,28 @@ }; ssp0: ssp@80010000 { - reg = <0x80010000 2000>; + reg = <0x80010000 0x2000>; interrupts = <96 82>; fsl,ssp-dma-channel = <0>; status = "disabled"; }; ssp1: ssp@80012000 { - reg = <0x80012000 2000>; + reg = <0x80012000 0x2000>; interrupts = <97 83>; fsl,ssp-dma-channel = <1>; status = "disabled"; }; ssp2: ssp@80014000 { - reg = <0x80014000 2000>; + reg = <0x80014000 0x2000>; interrupts = <98 84>; fsl,ssp-dma-channel = <2>; status = "disabled"; }; ssp3: ssp@80016000 { - reg = <0x80016000 2000>; + reg = <0x80016000 0x2000>; interrupts = <99 85>; fsl,ssp-dma-channel = <3>; status = "disabled"; @@ -117,7 +117,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-pinctrl", "simple-bus"; - reg = <0x80018000 2000>; + reg = <0x80018000 0x2000>; gpio0: gpio@0 { compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; @@ -510,96 +510,96 @@ }; digctl@8001c000 { - reg = <0x8001c000 2000>; + reg = <0x8001c000 0x2000>; interrupts = <89>; status = "disabled"; }; etm@80022000 { - reg = <0x80022000 2000>; + reg = <0x80022000 0x2000>; status = "disabled"; }; dma-apbx@80024000 { compatible = "fsl,imx28-dma-apbx"; - reg = <0x80024000 2000>; + reg = <0x80024000 0x2000>; }; dcp@80028000 { - reg = <0x80028000 2000>; + reg = <0x80028000 0x2000>; interrupts = <52 53 54>; status = "disabled"; }; pxp@8002a000 { - reg = <0x8002a000 2000>; + reg = <0x8002a000 0x2000>; interrupts = <39>; status = "disabled"; }; ocotp@8002c000 { - reg = <0x8002c000 2000>; + reg = <0x8002c000 0x2000>; status = "disabled"; }; axi-ahb@8002e000 { - reg = <0x8002e000 2000>; + reg = <0x8002e000 0x2000>; status = "disabled"; }; lcdif@80030000 { compatible = "fsl,imx28-lcdif"; - reg = <0x80030000 2000>; + reg = <0x80030000 0x2000>; interrupts = <38 86>; status = "disabled"; }; can0: can@80032000 { compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; - reg = <0x80032000 2000>; + reg = <0x80032000 0x2000>; interrupts = <8>; status = "disabled"; }; can1: can@80034000 { compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; - reg = <0x80034000 2000>; + reg = <0x80034000 0x2000>; interrupts = <9>; status = "disabled"; }; simdbg@8003c000 { - reg = <0x8003c000 200>; + reg = <0x8003c000 0x200>; status = "disabled"; }; simgpmisel@8003c200 { - reg = <0x8003c200 100>; + reg = <0x8003c200 0x100>; status = "disabled"; }; simsspsel@8003c300 { - reg = <0x8003c300 100>; + reg = <0x8003c300 0x100>; status = "disabled"; }; simmemsel@8003c400 { - reg = <0x8003c400 100>; + reg = <0x8003c400 0x100>; status = "disabled"; }; gpiomon@8003c500 { - reg = <0x8003c500 100>; + reg = <0x8003c500 0x100>; status = "disabled"; }; simenet@8003c700 { - reg = <0x8003c700 100>; + reg = <0x8003c700 0x100>; status = "disabled"; }; armjtag@8003c800 { - reg = <0x8003c800 100>; + reg = <0x8003c800 0x100>; status = "disabled"; }; }; @@ -612,45 +612,45 @@ ranges; clkctl@80040000 { - reg = <0x80040000 2000>; + reg = <0x80040000 0x2000>; status = "disabled"; }; saif0: saif@80042000 { compatible = "fsl,imx28-saif"; - reg = <0x80042000 2000>; + reg = <0x80042000 0x2000>; interrupts = <59 80>; fsl,saif-dma-channel = <4>; status = "disabled"; }; power@80044000 { - reg = <0x80044000 2000>; + reg = <0x80044000 0x2000>; status = "disabled"; }; saif1: saif@80046000 { compatible = "fsl,imx28-saif"; - reg = <0x80046000 2000>; + reg = <0x80046000 0x2000>; interrupts = <58 81>; fsl,saif-dma-channel = <5>; status = "disabled"; }; lradc@80050000 { - reg = <0x80050000 2000>; + reg = <0x80050000 0x2000>; status = "disabled"; }; spdif@80054000 { - reg = <0x80054000 2000>; + reg = <0x80054000 0x2000>; interrupts = <45 66>; status = "disabled"; }; rtc@80056000 { compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc"; - reg = <0x80056000 2000>; + reg = <0x80056000 0x2000>; interrupts = <29>; }; @@ -658,7 +658,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-i2c"; - reg = <0x80058000 2000>; + reg = <0x80058000 0x2000>; interrupts = <111 68>; clock-frequency = <100000>; status = "disabled"; @@ -668,7 +668,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-i2c"; - reg = <0x8005a000 2000>; + reg = <0x8005a000 0x2000>; interrupts = <110 69>; clock-frequency = <100000>; status = "disabled"; @@ -676,14 +676,14 @@ pwm: pwm@80064000 { compatible = "fsl,imx28-pwm", "fsl,imx23-pwm"; - reg = <0x80064000 2000>; + reg = <0x80064000 0x2000>; #pwm-cells = <2>; fsl,pwm-number = <8>; status = "disabled"; }; timrot@80068000 { - reg = <0x80068000 2000>; + reg = <0x80068000 0x2000>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index de065b5976e6..cd86177a3ea2 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -53,7 +53,7 @@ spi-max-frequency = <6000000>; reg = <0>; interrupt-parent = <&gpio1>; - interrupts = <8>; + interrupts = <8 0x4>; regulators { sw1_reg: sw1 { diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 53cbaa3d4f90..aba28dc87fc8 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -17,6 +17,10 @@ serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; }; tzic: tz-interrupt-controller@e0000000 { diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index 5b8eafcdbeec..da895e93a999 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -64,12 +64,32 @@ reg = <0xf4000000 0x2000000>; phy-mode = "mii"; interrupt-parent = <&gpio2>; - interrupts = <31>; + interrupts = <31 0x8>; reg-io-width = <4>; + /* + * VDD33A and VDDVARIO of LAN9220 are supplied by + * SW4_3V3 of LTC3589. Before the regulator driver + * for this PMIC is available, we use a fixed dummy + * 3V3 regulator to get LAN9220 driver probing work. + */ + vdd33a-supply = <®_3p3v>; + vddvario-supply = <®_3p3v>; smsc,irq-push-pull; }; }; + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + gpio-keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index fc79cdc4b4e6..cd37165edce5 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -19,6 +19,13 @@ serial2 = &uart3; serial3 = &uart4; serial4 = &uart5; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + gpio6 = &gpio7; }; tzic: tz-interrupt-controller@0fffc000 { diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index d42e851ceb97..72f30f3e6171 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -53,6 +53,7 @@ fsl,pins = < 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */ 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */ + 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */ >; }; }; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 3d3c64b014e6..fd57079f71a9 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -19,6 +19,13 @@ serial2 = &uart3; serial3 = &uart4; serial4 = &uart5; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + gpio6 = &gpio7; }; cpus { diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts index 9a33077130e8..5bb0bf39d3b8 100644 --- a/arch/arm/boot/dts/kirkwood-dns320.dts +++ b/arch/arm/boot/dts/kirkwood-dns320.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood.dtsi" +/include/ "kirkwood-dnskw.dtsi" / { model = "D-Link DNS-320 NAS (Rev A1)"; @@ -15,6 +15,31 @@ bootargs = "console=ttyS0,115200n8 earlyprintk"; }; + gpio-leds { + compatible = "gpio-leds"; + blue-power { + label = "dns320:blue:power"; + gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */ + linux,default-trigger = "default-on"; + }; + blue-usb { + label = "dns320:blue:usb"; + gpios = <&gpio1 11 1>; /* GPIO 43 Active Low */ + }; + orange-l_hdd { + label = "dns320:orange:l_hdd"; + gpios = <&gpio0 28 1>; /* GPIO 28 Active Low */ + }; + orange-r_hdd { + label = "dns320:orange:r_hdd"; + gpios = <&gpio0 27 1>; /* GPIO 27 Active Low */ + }; + orange-usb { + label = "dns320:orange:usb"; + gpios = <&gpio1 3 1>; /* GPIO 35 Active Low */ + }; + }; + ocp@f1000000 { serial@12000 { clock-frequency = <166666667>; @@ -25,40 +50,5 @@ clock-frequency = <166666667>; status = "okay"; }; - - nand@3000000 { - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - read-only; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x500000>; - }; - - partition@600000 { - label = "ramdisk"; - reg = <0x0600000 0x500000>; - }; - - partition@b00000 { - label = "image"; - reg = <0x0b00000 0x6600000>; - }; - - partition@7100000 { - label = "mini firmware"; - reg = <0x7100000 0xa00000>; - }; - - partition@7b00000 { - label = "config"; - reg = <0x7b00000 0x500000>; - }; - }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts index 16734c1b5dfe..d430713ea9b9 100644 --- a/arch/arm/boot/dts/kirkwood-dns325.dts +++ b/arch/arm/boot/dts/kirkwood-dns325.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood.dtsi" +/include/ "kirkwood-dnskw.dtsi" / { model = "D-Link DNS-325 NAS (Rev A1)"; @@ -15,45 +15,43 @@ bootargs = "console=ttyS0,115200n8 earlyprintk"; }; - ocp@f1000000 { - serial@12000 { - clock-frequency = <200000000>; - status = "okay"; + gpio-leds { + compatible = "gpio-leds"; + white-power { + label = "dns325:white:power"; + gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */ + linux,default-trigger = "default-on"; + }; + white-usb { + label = "dns325:white:usb"; + gpios = <&gpio1 11 1>; /* GPIO 43 Active Low */ + }; + red-l_hdd { + label = "dns325:red:l_hdd"; + gpios = <&gpio0 28 1>; /* GPIO 28 Active Low */ }; + red-r_hdd { + label = "dns325:red:r_hdd"; + gpios = <&gpio0 27 1>; /* GPIO 27 Active Low */ + }; + red-usb { + label = "dns325:red:usb"; + gpios = <&gpio0 29 1>; /* GPIO 29 Active Low */ + }; + }; - nand@3000000 { + ocp@f1000000 { + i2c@11000 { status = "okay"; - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - read-only; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x500000>; - }; - - partition@600000 { - label = "ramdisk"; - reg = <0x0600000 0x500000>; - }; - - partition@b00000 { - label = "image"; - reg = <0x0b00000 0x6600000>; - }; - - partition@7100000 { - label = "mini firmware"; - reg = <0x7100000 0xa00000>; - }; - - partition@7b00000 { - label = "config"; - reg = <0x7b00000 0x500000>; + lm75: lm75@48 { + compatible = "national,lm75"; + reg = <0x48>; }; }; + serial@12000 { + clock-frequency = <200000000>; + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi new file mode 100644 index 000000000000..7408655f91b5 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -0,0 +1,69 @@ +/include/ "kirkwood.dtsi" + +/ { + model = "D-Link DNS NASes (kirkwood-based)"; + compatible = "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "Power button"; + linux,code = <116>; + gpios = <&gpio1 2 1>; + }; + button@2 { + label = "USB unmount button"; + linux,code = <161>; + gpios = <&gpio1 15 1>; + }; + button@3 { + label = "Reset button"; + linux,code = <0x198>; + gpios = <&gpio1 16 1>; + }; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x500000>; + }; + + partition@600000 { + label = "ramdisk"; + reg = <0x0600000 0x500000>; + }; + + partition@b00000 { + label = "image"; + reg = <0x0b00000 0x6600000>; + }; + + partition@7100000 { + label = "mini firmware"; + reg = <0x7100000 0xa00000>; + }; + + partition@7b00000 { + label = "config"; + reg = <0x7b00000 0x500000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index 78b0f06a09a2..26e281fbf6bc 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -20,5 +20,55 @@ clock-frequency = <200000000>; status = "ok"; }; + + spi@10600 { + status = "okay"; + + m25p40@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l1606e"; + reg = <0>; + spi-max-frequency = <50000000>; + mode = <0>; + + partition@0 { + reg = <0x0 0x80000>; + label = "u-boot"; + }; + + partition@100000 { + reg = <0x100000 0x10000>; + label = "u-boot env"; + }; + + partition@180000 { + reg = <0x180000 0x10000>; + label = "dtb"; + }; + }; + }; + + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + bluetooth { + label = "dreamplug:blue:bluetooth"; + gpios = <&gpio1 15 1>; + }; + wifi { + label = "dreamplug:green:wifi"; + gpios = <&gpio1 16 1>; + }; + wifi-ap { + label = "dreamplug:green:wifi_ap"; + gpios = <&gpio1 17 1>; + }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts new file mode 100644 index 000000000000..7c8238fbb6f9 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -0,0 +1,99 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Seagate GoFlex Net"; + compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x400000>; + }; + + partition@500000 { + label = "pogoplug"; + reg = <0x0500000 0x2000000>; + }; + + partition@2500000 { + label = "root"; + reg = <0x02500000 0xd800000>; + }; + }; + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + }; + gpio-leds { + compatible = "gpio-leds"; + + health { + label = "status:green:health"; + gpios = <&gpio1 14 1>; + linux,default-trigger = "default-on"; + }; + fault { + label = "status:orange:fault"; + gpios = <&gpio1 15 1>; + }; + left0 { + label = "status:white:left0"; + gpios = <&gpio1 10 0>; + }; + left1 { + label = "status:white:left1"; + gpios = <&gpio1 11 0>; + }; + left2 { + label = "status:white:left2"; + gpios = <&gpio1 12 0>; + }; + left3 { + label = "status:white:left3"; + gpios = <&gpio1 13 0>; + }; + right0 { + label = "status:white:right0"; + gpios = <&gpio1 6 0>; + }; + right1 { + label = "status:white:right1"; + gpios = <&gpio1 7 0>; + }; + right2 { + label = "status:white:right2"; + gpios = <&gpio1 8 0>; + }; + right3 { + label = "status:white:right3"; + gpios = <&gpio1 9 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index f59dcf6dc45f..66794ed75ff1 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -21,6 +21,11 @@ status = "okay"; }; + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + nand@3000000 { status = "okay"; @@ -41,4 +46,37 @@ }; }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "USB Copy"; + linux,code = <133>; + gpios = <&gpio0 29 1>; + }; + button@2 { + label = "Reset"; + linux,code = <0x198>; + gpios = <&gpio0 28 1>; + }; + }; + gpio-leds { + compatible = "gpio-leds"; + + green-os { + label = "ib62x0:green:os"; + gpios = <&gpio0 25 0>; + linux,default-trigger = "default-on"; + }; + red-os { + label = "ib62x0:red:os"; + gpios = <&gpio0 22 0>; + }; + usb-copy { + label = "ib62x0:red:usb_copy"; + gpios = <&gpio0 27 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 026a1f82d813..52d947045106 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -18,9 +18,51 @@ }; ocp@f1000000 { + i2c@11000 { + status = "okay"; + + lm63: lm63@4c { + compatible = "national,lm63"; + reg = <0x4c>; + }; + }; serial@12000 { clock-frequency = <200000000>; status = "ok"; }; }; + gpio-leds { + compatible = "gpio-leds"; + + led-level { + label = "led_level"; + gpios = <&gpio1 9 0>; + linux,default-trigger = "default-on"; + }; + power-blue { + label = "power:blue"; + gpios = <&gpio1 11 0>; + linux,default-trigger = "timer"; + }; + usb1 { + label = "usb1:blue"; + gpios = <&gpio1 12 0>; + }; + usb2 { + label = "usb2:blue"; + gpios = <&gpio1 13 0>; + }; + usb3 { + label = "usb3:blue"; + gpios = <&gpio1 14 0>; + }; + usb4 { + label = "usb4:blue"; + gpios = <&gpio1 15 0>; + }; + otb { + label = "otb:blue"; + gpios = <&gpio1 16 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-lschlv2.dts b/arch/arm/boot/dts/kirkwood-lschlv2.dts new file mode 100644 index 000000000000..9510c9ea666c --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-lschlv2.dts @@ -0,0 +1,20 @@ +/dts-v1/; + +/include/ "kirkwood-lsxl.dtsi" + +/ { + model = "Buffalo Linkstation LS-CHLv2"; + compatible = "buffalo,lschlv2", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x4000000>; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <166666667>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-lsxhl.dts b/arch/arm/boot/dts/kirkwood-lsxhl.dts new file mode 100644 index 000000000000..739019c4cba9 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-lsxhl.dts @@ -0,0 +1,20 @@ +/dts-v1/; + +/include/ "kirkwood-lsxl.dtsi" + +/ { + model = "Buffalo Linkstation LS-XHL"; + compatible = "buffalo,lsxhl", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi new file mode 100644 index 000000000000..8ac51c08269d --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -0,0 +1,95 @@ +/include/ "kirkwood.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + + spi@10600 { + status = "okay"; + + m25p40@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p40"; + reg = <0>; + spi-max-frequency = <25000000>; + mode = <0>; + + partition@0 { + reg = <0x0 0x60000>; + label = "uboot"; + read-only; + }; + + partition@60000 { + reg = <0x60000 0x10000>; + label = "dtb"; + read-only; + }; + + partition@70000 { + reg = <0x70000 0x10000>; + label = "uboot_env"; + }; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "Function Button"; + linux,code = <132>; + gpios = <&gpio1 9 1>; + }; + button@2 { + label = "Power-on Switch"; + linux,code = <116>; + gpios = <&gpio1 10 1>; + }; + button@3 { + label = "Power-auto Switch"; + linux,code = <142>; + gpios = <&gpio1 11 1>; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + + led@1 { + label = "lschlv2:blue:func"; + gpios = <&gpio1 4 1>; + }; + + led@2 { + label = "lschlv2:red:alarm"; + gpios = <&gpio1 5 1>; + }; + + led@3 { + label = "lschlv2:amber:info"; + gpios = <&gpio1 6 1>; + }; + + led@4 { + label = "lschlv2:blue:power"; + gpios = <&gpio1 7 1>; + linux,default-trigger = "default-on"; + }; + + led@5 { + label = "lschlv2:red:func"; + gpios = <&gpio1 16 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts new file mode 100644 index 000000000000..ccbf32757800 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts @@ -0,0 +1,21 @@ +/dts-v1/; + +/include/ "kirkwood-ts219.dtsi" + +/ { + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "USB Copy"; + linux,code = <133>; + gpios = <&gpio0 15 1>; + }; + button@2 { + label = "Reset"; + linux,code = <0x198>; + gpios = <&gpio0 16 1>; + }; + }; +};
\ No newline at end of file diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts new file mode 100644 index 000000000000..fbe9932161a1 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts @@ -0,0 +1,21 @@ +/dts-v1/; + +/include/ "kirkwood-ts219.dtsi" + +/ { + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "USB Copy"; + linux,code = <133>; + gpios = <&gpio1 11 1>; + }; + button@2 { + label = "Reset"; + linux,code = <0x198>; + gpios = <&gpio1 5 1>; + }; + }; +};
\ No newline at end of file diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi new file mode 100644 index 000000000000..64ea27cb3298 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -0,0 +1,78 @@ +/include/ "kirkwood.dtsi" + +/ { + model = "QNAP TS219 family"; + compatible = "qnap,ts219", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + ocp@f1000000 { + i2c@11000 { + status = "okay"; + clock-frequency = <400000>; + + s35390a: s35390a@30 { + compatible = "s35390a"; + reg = <0x30>; + }; + }; + serial@12000 { + clock-frequency = <200000000>; + status = "okay"; + }; + serial@12100 { + clock-frequency = <200000000>; + status = "okay"; + }; + spi@10600 { + status = "okay"; + + m25p128@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p128"; + reg = <0>; + spi-max-frequency = <20000000>; + mode = <0>; + + partition@0000000 { + reg = <0x00000000 0x00080000>; + label = "U-Boot"; + }; + + partition@00200000 { + reg = <0x00200000 0x00200000>; + label = "Kernel"; + }; + + partition@00400000 { + reg = <0x00400000 0x00900000>; + label = "RootFS1"; + }; + partition@00d00000 { + reg = <0x00d00000 0x00300000>; + label = "RootFS2"; + }; + partition@00040000 { + reg = <0x00080000 0x00040000>; + label = "U-Boot Config"; + }; + partition@000c0000 { + reg = <0x000c0000 0x00140000>; + label = "NAS Config"; + }; + }; + }; + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index f95dbc190ab6..cef9616f330a 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -2,6 +2,15 @@ / { compatible = "marvell,kirkwood"; + interrupt-parent = <&intc>; + + intc: interrupt-controller { + compatible = "marvell,orion-intc", "marvell,intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xf1020204 0x04>, + <0xf1020214 0x04>; + }; ocp@f1000000 { compatible = "simple-bus"; @@ -9,6 +18,24 @@ #address-cells = <1>; #size-cells = <1>; + gpio0: gpio@10100 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x10100 0x40>; + ngpio = <32>; + interrupts = <35>, <36>, <37>, <38>; + }; + + gpio1: gpio@10140 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x10140 0x40>; + ngpio = <18>; + interrupts = <39>, <40>, <41>; + }; + serial@12000 { compatible = "ns16550a"; reg = <0x12000 0x100>; @@ -33,6 +60,29 @@ interrupts = <53>; }; + spi@10600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = <23>; + reg = <0x10600 0x28>; + status = "disabled"; + }; + + wdt@20300 { + compatible = "marvell,orion-wdt"; + reg = <0x20300 0x28>; + status = "okay"; + }; + + sata@80000 { + compatible = "marvell,orion-sata"; + reg = <0x80000 0x5000>; + interrupts = <21>; + status = "disabled"; + }; + nand@3000000 { #address-cells = <1>; #size-cells = <1>; @@ -45,5 +95,15 @@ /* set partition map and/or chip-delay in board dts */ status = "disabled"; }; + + i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <29>; + clock-frequency = <100000>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index f725b9637b33..3c9f32f9b6b4 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -192,6 +192,7 @@ CONFIG_RTC_DRV_MC13XXX=y CONFIG_RTC_DRV_MXC=y CONFIG_DMADEVICES=y CONFIG_IMX_SDMA=y +CONFIG_MXS_DMA=y CONFIG_COMMON_CLK_DEBUG=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT2_FS=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index ccdb6357fb74..4edcfb4e4dee 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -34,7 +34,6 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y -CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 CONFIG_AUTO_ZRELADDR=y CONFIG_FPE_NWFPE=y CONFIG_NET=y diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig index 1d24f8458bef..71277a1591ba 100644 --- a/arch/arm/configs/tct_hammer_defconfig +++ b/arch/arm/configs/tct_hammer_defconfig @@ -7,7 +7,7 @@ CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y # CONFIG_KALLSYMS is not set -# CONFIG_BUG is not set +# CONFIG_BUGVERBOSE is not set # CONFIG_ELF_CORE is not set # CONFIG_SHMEM is not set CONFIG_SLOB=y diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index f66626d71e7d..41dc31f834c3 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -195,6 +195,18 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) #define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0) +#define pte_none(pte) (!pte_val(pte)) +#define pte_present(pte) (pte_val(pte) & L_PTE_PRESENT) +#define pte_write(pte) (!(pte_val(pte) & L_PTE_RDONLY)) +#define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY) +#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) +#define pte_exec(pte) (!(pte_val(pte) & L_PTE_XN)) +#define pte_special(pte) (0) + +#define pte_present_user(pte) \ + ((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \ + (L_PTE_PRESENT | L_PTE_USER)) + #if __LINUX_ARM_ARCH__ < 6 static inline void __sync_icache_dcache(pte_t pteval) { @@ -206,25 +218,15 @@ extern void __sync_icache_dcache(pte_t pteval); static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pteval) { - if (addr >= TASK_SIZE) - set_pte_ext(ptep, pteval, 0); - else { + unsigned long ext = 0; + + if (addr < TASK_SIZE && pte_present_user(pteval)) { __sync_icache_dcache(pteval); - set_pte_ext(ptep, pteval, PTE_EXT_NG); + ext |= PTE_EXT_NG; } -} -#define pte_none(pte) (!pte_val(pte)) -#define pte_present(pte) (pte_val(pte) & L_PTE_PRESENT) -#define pte_write(pte) (!(pte_val(pte) & L_PTE_RDONLY)) -#define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY) -#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) -#define pte_exec(pte) (!(pte_val(pte) & L_PTE_XN)) -#define pte_special(pte) (0) - -#define pte_present_user(pte) \ - ((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \ - (L_PTE_PRESENT | L_PTE_USER)) + set_pte_ext(ptep, pteval, ext); +} #define PTE_BIT_FUNC(fn,op) \ static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; } @@ -251,13 +253,13 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) * * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 - * <--------------- offset --------------------> <- type --> 0 0 0 + * <--------------- offset ----------------------> < type -> 0 0 0 * - * This gives us up to 63 swap files and 32GB per swap file. Note that + * This gives us up to 31 swap files and 64GB per swap file. Note that * the offset field is always non-zero. */ #define __SWP_TYPE_SHIFT 3 -#define __SWP_TYPE_BITS 6 +#define __SWP_TYPE_BITS 5 #define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1) #define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT) diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h index e3f757263438..05b8e82ec9f5 100644 --- a/arch/arm/include/asm/sched_clock.h +++ b/arch/arm/include/asm/sched_clock.h @@ -10,5 +10,7 @@ extern void sched_clock_postinit(void); extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate); +extern void setup_sched_clock_needs_suspend(u32 (*read)(void), int bits, + unsigned long rate); #endif diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index 27d186abbc06..f4515393248d 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -21,6 +21,8 @@ struct clock_data { u32 epoch_cyc_copy; u32 mult; u32 shift; + bool suspended; + bool needs_suspend; }; static void sched_clock_poll(unsigned long wrap_ticks); @@ -49,6 +51,9 @@ static unsigned long long cyc_to_sched_clock(u32 cyc, u32 mask) u64 epoch_ns; u32 epoch_cyc; + if (cd.suspended) + return cd.epoch_ns; + /* * Load the epoch_cyc and epoch_ns atomically. We do this by * ensuring that we always write epoch_cyc, epoch_ns and @@ -98,6 +103,13 @@ static void sched_clock_poll(unsigned long wrap_ticks) update_sched_clock(); } +void __init setup_sched_clock_needs_suspend(u32 (*read)(void), int bits, + unsigned long rate) +{ + setup_sched_clock(read, bits, rate); + cd.needs_suspend = true; +} + void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) { unsigned long r, w; @@ -169,11 +181,23 @@ void __init sched_clock_postinit(void) static int sched_clock_suspend(void) { sched_clock_poll(sched_clock_timer.data); + if (cd.needs_suspend) + cd.suspended = true; return 0; } +static void sched_clock_resume(void) +{ + if (cd.needs_suspend) { + cd.epoch_cyc = read_sched_clock(); + cd.epoch_cyc_copy = cd.epoch_cyc; + cd.suspended = false; + } +} + static struct syscore_ops sched_clock_ops = { .suspend = sched_clock_suspend, + .resume = sched_clock_resume, }; static int __init sched_clock_syscore_init(void) diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index 198b08456e90..26c12c6440fc 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -321,7 +321,7 @@ void store_cpu_topology(unsigned int cpuid) * init_cpu_topology is called at boot when only one cpu is running * which prevent simultaneous write access to cpu_topology array */ -void init_cpu_topology(void) +void __init init_cpu_topology(void) { unsigned int cpu; diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 2473fd1fd51c..af72969820b4 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -16,13 +16,30 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ call_with_stack.o mmu-y := clear_user.o copy_page.o getuser.o putuser.o -mmu-y += copy_from_user.o copy_to_user.o + +# the code in uaccess.S is not preemption safe and +# probably faster on ARMv3 only +ifeq ($(CONFIG_PREEMPT),y) + mmu-y += copy_from_user.o copy_to_user.o +else +ifneq ($(CONFIG_CPU_32v3),y) + mmu-y += copy_from_user.o copy_to_user.o +else + mmu-y += uaccess.o +endif +endif # using lib_ here won't override already available weak symbols obj-$(CONFIG_UACCESS_WITH_MEMCPY) += uaccess_with_memcpy.o -lib-$(CONFIG_MMU) += $(mmu-y) -lib-y += io-readsw-armv4.o io-writesw-armv4.o +lib-$(CONFIG_MMU) += $(mmu-y) + +ifeq ($(CONFIG_CPU_32v3),y) + lib-y += io-readsw-armv3.o io-writesw-armv3.o +else + lib-y += io-readsw-armv4.o io-writesw-armv4.o +endif + lib-$(CONFIG_ARCH_RPC) += ecard.o io-acorn.o floppydma.o lib-$(CONFIG_ARCH_SHARK) += io-shark.o diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S new file mode 100644 index 000000000000..88487c8c4f23 --- /dev/null +++ b/arch/arm/lib/io-readsw-armv3.S @@ -0,0 +1,106 @@ +/* + * linux/arch/arm/lib/io-readsw-armv3.S + * + * Copyright (C) 1995-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <asm/assembler.h> + +.Linsw_bad_alignment: + adr r0, .Linsw_bad_align_msg + mov r2, lr + b panic +.Linsw_bad_align_msg: + .asciz "insw: bad buffer alignment (0x%p, lr=0x%08lX)\n" + .align + +.Linsw_align: tst r1, #1 + bne .Linsw_bad_alignment + + ldr r3, [r0] + strb r3, [r1], #1 + mov r3, r3, lsr #8 + strb r3, [r1], #1 + + subs r2, r2, #1 + moveq pc, lr + +ENTRY(__raw_readsw) + teq r2, #0 @ do we have to check for the zero len? + moveq pc, lr + tst r1, #3 + bne .Linsw_align + +.Linsw_aligned: mov ip, #0xff + orr ip, ip, ip, lsl #8 + stmfd sp!, {r4, r5, r6, lr} + + subs r2, r2, #8 + bmi .Lno_insw_8 + +.Linsw_8_lp: ldr r3, [r0] + and r3, r3, ip + ldr r4, [r0] + orr r3, r3, r4, lsl #16 + + ldr r4, [r0] + and r4, r4, ip + ldr r5, [r0] + orr r4, r4, r5, lsl #16 + + ldr r5, [r0] + and r5, r5, ip + ldr r6, [r0] + orr r5, r5, r6, lsl #16 + + ldr r6, [r0] + and r6, r6, ip + ldr lr, [r0] + orr r6, r6, lr, lsl #16 + + stmia r1!, {r3 - r6} + + subs r2, r2, #8 + bpl .Linsw_8_lp + + tst r2, #7 + ldmeqfd sp!, {r4, r5, r6, pc} + +.Lno_insw_8: tst r2, #4 + beq .Lno_insw_4 + + ldr r3, [r0] + and r3, r3, ip + ldr r4, [r0] + orr r3, r3, r4, lsl #16 + + ldr r4, [r0] + and r4, r4, ip + ldr r5, [r0] + orr r4, r4, r5, lsl #16 + + stmia r1!, {r3, r4} + +.Lno_insw_4: tst r2, #2 + beq .Lno_insw_2 + + ldr r3, [r0] + and r3, r3, ip + ldr r4, [r0] + orr r3, r3, r4, lsl #16 + + str r3, [r1], #4 + +.Lno_insw_2: tst r2, #1 + ldrne r3, [r0] + strneb r3, [r1], #1 + movne r3, r3, lsr #8 + strneb r3, [r1] + + ldmfd sp!, {r4, r5, r6, pc} + + diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S new file mode 100644 index 000000000000..49b800419e32 --- /dev/null +++ b/arch/arm/lib/io-writesw-armv3.S @@ -0,0 +1,126 @@ +/* + * linux/arch/arm/lib/io-writesw-armv3.S + * + * Copyright (C) 1995-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <asm/assembler.h> + +.Loutsw_bad_alignment: + adr r0, .Loutsw_bad_align_msg + mov r2, lr + b panic +.Loutsw_bad_align_msg: + .asciz "outsw: bad buffer alignment (0x%p, lr=0x%08lX)\n" + .align + +.Loutsw_align: tst r1, #1 + bne .Loutsw_bad_alignment + + add r1, r1, #2 + + ldr r3, [r1, #-4] + mov r3, r3, lsr #16 + orr r3, r3, r3, lsl #16 + str r3, [r0] + subs r2, r2, #1 + moveq pc, lr + +ENTRY(__raw_writesw) + teq r2, #0 @ do we have to check for the zero len? + moveq pc, lr + tst r1, #3 + bne .Loutsw_align + + stmfd sp!, {r4, r5, r6, lr} + + subs r2, r2, #8 + bmi .Lno_outsw_8 + +.Loutsw_8_lp: ldmia r1!, {r3, r4, r5, r6} + + mov ip, r3, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r3, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r4, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r4, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r5, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r5, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r6, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r6, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + subs r2, r2, #8 + bpl .Loutsw_8_lp + + tst r2, #7 + ldmeqfd sp!, {r4, r5, r6, pc} + +.Lno_outsw_8: tst r2, #4 + beq .Lno_outsw_4 + + ldmia r1!, {r3, r4} + + mov ip, r3, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r3, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r4, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r4, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + +.Lno_outsw_4: tst r2, #2 + beq .Lno_outsw_2 + + ldr r3, [r1], #4 + + mov ip, r3, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r3, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + +.Lno_outsw_2: tst r2, #1 + + ldrne r3, [r1] + + movne ip, r3, lsl #16 + orrne ip, ip, ip, lsr #16 + strne ip, [r0] + + ldmfd sp!, {r4, r5, r6, pc} diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S new file mode 100644 index 000000000000..5c908b1cb8ed --- /dev/null +++ b/arch/arm/lib/uaccess.S @@ -0,0 +1,564 @@ +/* + * linux/arch/arm/lib/uaccess.S + * + * Copyright (C) 1995, 1996,1997,1998 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Routines to block copy data to/from user memory + * These are highly optimised both for the 4k page size + * and for various alignments. + */ +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/errno.h> +#include <asm/domain.h> + + .text + +#define PAGE_SHIFT 12 + +/* Prototype: int __copy_to_user(void *to, const char *from, size_t n) + * Purpose : copy a block to user memory from kernel memory + * Params : to - user memory + * : from - kernel memory + * : n - number of bytes to copy + * Returns : Number of bytes NOT copied. + */ + +.Lc2u_dest_not_aligned: + rsb ip, ip, #4 + cmp ip, #2 + ldrb r3, [r1], #1 +USER( TUSER( strb) r3, [r0], #1) @ May fault + ldrgeb r3, [r1], #1 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #1 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + sub r2, r2, ip + b .Lc2u_dest_aligned + +ENTRY(__copy_to_user) + stmfd sp!, {r2, r4 - r7, lr} + cmp r2, #4 + blt .Lc2u_not_enough + ands ip, r0, #3 + bne .Lc2u_dest_not_aligned +.Lc2u_dest_aligned: + + ands ip, r1, #3 + bne .Lc2u_src_not_aligned +/* + * Seeing as there has to be at least 8 bytes to copy, we can + * copy one word, and force a user-mode page fault... + */ + +.Lc2u_0fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_0nowords + ldr r3, [r1], #4 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_0fupi +/* + * ip = max no. of bytes to copy before needing another "strt" insn + */ + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #32 + blt .Lc2u_0rem8lp + +.Lc2u_0cpy8lp: ldmia r1!, {r3 - r6} + stmia r0!, {r3 - r6} @ Shouldnt fault + ldmia r1!, {r3 - r6} + subs ip, ip, #32 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_0cpy8lp + +.Lc2u_0rem8lp: cmn ip, #16 + ldmgeia r1!, {r3 - r6} + stmgeia r0!, {r3 - r6} @ Shouldnt fault + tst ip, #8 + ldmneia r1!, {r3 - r4} + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + ldrne r3, [r1], #4 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_0fupi +.Lc2u_0nowords: teq ip, #0 + beq .Lc2u_finished +.Lc2u_nowords: cmp ip, #2 + ldrb r3, [r1], #1 +USER( TUSER( strb) r3, [r0], #1) @ May fault + ldrgeb r3, [r1], #1 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #1 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished + +.Lc2u_not_enough: + movs ip, r2 + bne .Lc2u_nowords +.Lc2u_finished: mov r0, #0 + ldmfd sp!, {r2, r4 - r7, pc} + +.Lc2u_src_not_aligned: + bic r1, r1, #3 + ldr r7, [r1], #4 + cmp ip, #2 + bgt .Lc2u_3fupi + beq .Lc2u_2fupi +.Lc2u_1fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_1nowords + mov r3, r7, pull #8 + ldr r7, [r1], #4 + orr r3, r3, r7, push #24 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_1fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lc2u_1rem8lp + +.Lc2u_1cpy8lp: mov r3, r7, pull #8 + ldmia r1!, {r4 - r7} + subs ip, ip, #16 + orr r3, r3, r4, push #24 + mov r4, r4, pull #8 + orr r4, r4, r5, push #24 + mov r5, r5, pull #8 + orr r5, r5, r6, push #24 + mov r6, r6, pull #8 + orr r6, r6, r7, push #24 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_1cpy8lp + +.Lc2u_1rem8lp: tst ip, #8 + movne r3, r7, pull #8 + ldmneia r1!, {r4, r7} + orrne r3, r3, r4, push #24 + movne r4, r4, pull #8 + orrne r4, r4, r7, push #24 + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + movne r3, r7, pull #8 + ldrne r7, [r1], #4 + orrne r3, r3, r7, push #24 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_1fupi +.Lc2u_1nowords: mov r3, r7, get_byte_1 + teq ip, #0 + beq .Lc2u_finished + cmp ip, #2 +USER( TUSER( strb) r3, [r0], #1) @ May fault + movge r3, r7, get_byte_2 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + movgt r3, r7, get_byte_3 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished + +.Lc2u_2fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_2nowords + mov r3, r7, pull #16 + ldr r7, [r1], #4 + orr r3, r3, r7, push #16 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_2fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lc2u_2rem8lp + +.Lc2u_2cpy8lp: mov r3, r7, pull #16 + ldmia r1!, {r4 - r7} + subs ip, ip, #16 + orr r3, r3, r4, push #16 + mov r4, r4, pull #16 + orr r4, r4, r5, push #16 + mov r5, r5, pull #16 + orr r5, r5, r6, push #16 + mov r6, r6, pull #16 + orr r6, r6, r7, push #16 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_2cpy8lp + +.Lc2u_2rem8lp: tst ip, #8 + movne r3, r7, pull #16 + ldmneia r1!, {r4, r7} + orrne r3, r3, r4, push #16 + movne r4, r4, pull #16 + orrne r4, r4, r7, push #16 + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + movne r3, r7, pull #16 + ldrne r7, [r1], #4 + orrne r3, r3, r7, push #16 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_2fupi +.Lc2u_2nowords: mov r3, r7, get_byte_2 + teq ip, #0 + beq .Lc2u_finished + cmp ip, #2 +USER( TUSER( strb) r3, [r0], #1) @ May fault + movge r3, r7, get_byte_3 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #0 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished + +.Lc2u_3fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_3nowords + mov r3, r7, pull #24 + ldr r7, [r1], #4 + orr r3, r3, r7, push #8 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_3fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lc2u_3rem8lp + +.Lc2u_3cpy8lp: mov r3, r7, pull #24 + ldmia r1!, {r4 - r7} + subs ip, ip, #16 + orr r3, r3, r4, push #8 + mov r4, r4, pull #24 + orr r4, r4, r5, push #8 + mov r5, r5, pull #24 + orr r5, r5, r6, push #8 + mov r6, r6, pull #24 + orr r6, r6, r7, push #8 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_3cpy8lp + +.Lc2u_3rem8lp: tst ip, #8 + movne r3, r7, pull #24 + ldmneia r1!, {r4, r7} + orrne r3, r3, r4, push #8 + movne r4, r4, pull #24 + orrne r4, r4, r7, push #8 + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + movne r3, r7, pull #24 + ldrne r7, [r1], #4 + orrne r3, r3, r7, push #8 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_3fupi +.Lc2u_3nowords: mov r3, r7, get_byte_3 + teq ip, #0 + beq .Lc2u_finished + cmp ip, #2 +USER( TUSER( strb) r3, [r0], #1) @ May fault + ldrgeb r3, [r1], #1 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #0 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished +ENDPROC(__copy_to_user) + + .pushsection .fixup,"ax" + .align 0 +9001: ldmfd sp!, {r0, r4 - r7, pc} + .popsection + +/* Prototype: unsigned long __copy_from_user(void *to,const void *from,unsigned long n); + * Purpose : copy a block from user memory to kernel memory + * Params : to - kernel memory + * : from - user memory + * : n - number of bytes to copy + * Returns : Number of bytes NOT copied. + */ +.Lcfu_dest_not_aligned: + rsb ip, ip, #4 + cmp ip, #2 +USER( TUSER( ldrb) r3, [r1], #1) @ May fault + strb r3, [r0], #1 +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault + strgtb r3, [r0], #1 + sub r2, r2, ip + b .Lcfu_dest_aligned + +ENTRY(__copy_from_user) + stmfd sp!, {r0, r2, r4 - r7, lr} + cmp r2, #4 + blt .Lcfu_not_enough + ands ip, r0, #3 + bne .Lcfu_dest_not_aligned +.Lcfu_dest_aligned: + ands ip, r1, #3 + bne .Lcfu_src_not_aligned + +/* + * Seeing as there has to be at least 8 bytes to copy, we can + * copy one word, and force a user-mode page fault... + */ + +.Lcfu_0fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_0nowords +USER( TUSER( ldr) r3, [r1], #4) + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_0fupi +/* + * ip = max no. of bytes to copy before needing another "strt" insn + */ + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #32 + blt .Lcfu_0rem8lp + +.Lcfu_0cpy8lp: ldmia r1!, {r3 - r6} @ Shouldnt fault + stmia r0!, {r3 - r6} + ldmia r1!, {r3 - r6} @ Shouldnt fault + subs ip, ip, #32 + stmia r0!, {r3 - r6} + bpl .Lcfu_0cpy8lp + +.Lcfu_0rem8lp: cmn ip, #16 + ldmgeia r1!, {r3 - r6} @ Shouldnt fault + stmgeia r0!, {r3 - r6} + tst ip, #8 + ldmneia r1!, {r3 - r4} @ Shouldnt fault + stmneia r0!, {r3 - r4} + tst ip, #4 + TUSER( ldrne) r3, [r1], #4 @ Shouldnt fault + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_0fupi +.Lcfu_0nowords: teq ip, #0 + beq .Lcfu_finished +.Lcfu_nowords: cmp ip, #2 +USER( TUSER( ldrb) r3, [r1], #1) @ May fault + strb r3, [r0], #1 +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault + strgtb r3, [r0], #1 + b .Lcfu_finished + +.Lcfu_not_enough: + movs ip, r2 + bne .Lcfu_nowords +.Lcfu_finished: mov r0, #0 + add sp, sp, #8 + ldmfd sp!, {r4 - r7, pc} + +.Lcfu_src_not_aligned: + bic r1, r1, #3 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + cmp ip, #2 + bgt .Lcfu_3fupi + beq .Lcfu_2fupi +.Lcfu_1fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_1nowords + mov r3, r7, pull #8 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + orr r3, r3, r7, push #24 + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_1fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lcfu_1rem8lp + +.Lcfu_1cpy8lp: mov r3, r7, pull #8 + ldmia r1!, {r4 - r7} @ Shouldnt fault + subs ip, ip, #16 + orr r3, r3, r4, push #24 + mov r4, r4, pull #8 + orr r4, r4, r5, push #24 + mov r5, r5, pull #8 + orr r5, r5, r6, push #24 + mov r6, r6, pull #8 + orr r6, r6, r7, push #24 + stmia r0!, {r3 - r6} + bpl .Lcfu_1cpy8lp + +.Lcfu_1rem8lp: tst ip, #8 + movne r3, r7, pull #8 + ldmneia r1!, {r4, r7} @ Shouldnt fault + orrne r3, r3, r4, push #24 + movne r4, r4, pull #8 + orrne r4, r4, r7, push #24 + stmneia r0!, {r3 - r4} + tst ip, #4 + movne r3, r7, pull #8 +USER( TUSER( ldrne) r7, [r1], #4) @ May fault + orrne r3, r3, r7, push #24 + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_1fupi +.Lcfu_1nowords: mov r3, r7, get_byte_1 + teq ip, #0 + beq .Lcfu_finished + cmp ip, #2 + strb r3, [r0], #1 + movge r3, r7, get_byte_2 + strgeb r3, [r0], #1 + movgt r3, r7, get_byte_3 + strgtb r3, [r0], #1 + b .Lcfu_finished + +.Lcfu_2fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_2nowords + mov r3, r7, pull #16 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + orr r3, r3, r7, push #16 + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_2fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lcfu_2rem8lp + + +.Lcfu_2cpy8lp: mov r3, r7, pull #16 + ldmia r1!, {r4 - r7} @ Shouldnt fault + subs ip, ip, #16 + orr r3, r3, r4, push #16 + mov r4, r4, pull #16 + orr r4, r4, r5, push #16 + mov r5, r5, pull #16 + orr r5, r5, r6, push #16 + mov r6, r6, pull #16 + orr r6, r6, r7, push #16 + stmia r0!, {r3 - r6} + bpl .Lcfu_2cpy8lp + +.Lcfu_2rem8lp: tst ip, #8 + movne r3, r7, pull #16 + ldmneia r1!, {r4, r7} @ Shouldnt fault + orrne r3, r3, r4, push #16 + movne r4, r4, pull #16 + orrne r4, r4, r7, push #16 + stmneia r0!, {r3 - r4} + tst ip, #4 + movne r3, r7, pull #16 +USER( TUSER( ldrne) r7, [r1], #4) @ May fault + orrne r3, r3, r7, push #16 + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_2fupi +.Lcfu_2nowords: mov r3, r7, get_byte_2 + teq ip, #0 + beq .Lcfu_finished + cmp ip, #2 + strb r3, [r0], #1 + movge r3, r7, get_byte_3 + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #0) @ May fault + strgtb r3, [r0], #1 + b .Lcfu_finished + +.Lcfu_3fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_3nowords + mov r3, r7, pull #24 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + orr r3, r3, r7, push #8 + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_3fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lcfu_3rem8lp + +.Lcfu_3cpy8lp: mov r3, r7, pull #24 + ldmia r1!, {r4 - r7} @ Shouldnt fault + orr r3, r3, r4, push #8 + mov r4, r4, pull #24 + orr r4, r4, r5, push #8 + mov r5, r5, pull #24 + orr r5, r5, r6, push #8 + mov r6, r6, pull #24 + orr r6, r6, r7, push #8 + stmia r0!, {r3 - r6} + subs ip, ip, #16 + bpl .Lcfu_3cpy8lp + +.Lcfu_3rem8lp: tst ip, #8 + movne r3, r7, pull #24 + ldmneia r1!, {r4, r7} @ Shouldnt fault + orrne r3, r3, r4, push #8 + movne r4, r4, pull #24 + orrne r4, r4, r7, push #8 + stmneia r0!, {r3 - r4} + tst ip, #4 + movne r3, r7, pull #24 +USER( TUSER( ldrne) r7, [r1], #4) @ May fault + orrne r3, r3, r7, push #8 + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_3fupi +.Lcfu_3nowords: mov r3, r7, get_byte_3 + teq ip, #0 + beq .Lcfu_finished + cmp ip, #2 + strb r3, [r0], #1 +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault + strgtb r3, [r0], #1 + b .Lcfu_finished +ENDPROC(__copy_from_user) + + .pushsection .fixup,"ax" + .align 0 + /* + * We took an exception. r0 contains a pointer to + * the byte not copied. + */ +9001: ldr r2, [sp], #4 @ void *to + sub r2, r0, r2 @ bytes copied + ldr r1, [sp], #4 @ unsigned long count + subs r4, r1, r2 @ bytes left to copy + movne r1, r4 + blne __memzero + mov r0, r4 + ldmfd sp!, {r4 - r7, pc} + .popsection + diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 5de69f2fcca9..f6b9fc70161b 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -162,38 +162,6 @@ static void __init davinci_ntosd2_map_io(void) dm644x_init(); } -/* - I2C initialization -*/ -static struct davinci_i2c_platform_data ntosd2_i2c_pdata = { - .bus_freq = 20 /* kHz */, - .bus_delay = 100 /* usec */, -}; - -static struct i2c_board_info __initdata ntosd2_i2c_info[] = { -}; - -static int ntosd2_init_i2c(void) -{ - int status; - - davinci_init_i2c(&ntosd2_i2c_pdata); - status = gpio_request(NTOSD2_MSP430_IRQ, ntosd2_i2c_info[0].type); - if (status == 0) { - status = gpio_direction_input(NTOSD2_MSP430_IRQ); - if (status == 0) { - status = gpio_to_irq(NTOSD2_MSP430_IRQ); - if (status > 0) { - ntosd2_i2c_info[0].irq = status; - i2c_register_board_info(1, - ntosd2_i2c_info, - ARRAY_SIZE(ntosd2_i2c_info)); - } - } - } - return status; -} - static struct davinci_mmc_config davinci_ntosd2_mmc_config = { .wires = 4, .version = MMC_CTLR_VERSION_1 @@ -218,7 +186,6 @@ static __init void davinci_ntosd2_init(void) { struct clk *aemif_clk; struct davinci_soc_info *soc_info = &davinci_soc_info; - int status; aemif_clk = clk_get(NULL, "aemif"); clk_enable(aemif_clk); @@ -242,12 +209,6 @@ static __init void davinci_ntosd2_init(void) platform_add_devices(davinci_ntosd2_devices, ARRAY_SIZE(davinci_ntosd2_devices)); - /* Initialize I2C interface specific for this board */ - status = ntosd2_init_i2c(); - if (status < 0) - pr_warning("davinci_ntosd2_init: msp430 irq setup failed:" - " %d\n", status); - davinci_serial_init(&uart_config); dm644x_init_asp(&dm644x_ntosd2_snd_data); diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c index f07fd16e0c9b..9bc97a5baaa8 100644 --- a/arch/arm/mach-dove/irq.c +++ b/arch/arm/mach-dove/irq.c @@ -20,22 +20,6 @@ #include <mach/bridge-regs.h> #include "common.h" -static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - int irqoff; - BUG_ON(irq < IRQ_DOVE_GPIO_0_7 || irq > IRQ_DOVE_HIGH_GPIO); - - irqoff = irq <= IRQ_DOVE_GPIO_16_23 ? irq - IRQ_DOVE_GPIO_0_7 : - 3 + irq - IRQ_DOVE_GPIO_24_31; - - orion_gpio_irq_handler(irqoff << 3); - if (irq == IRQ_DOVE_HIGH_GPIO) { - orion_gpio_irq_handler(40); - orion_gpio_irq_handler(48); - orion_gpio_irq_handler(56); - } -} - static void pmu_irq_mask(struct irq_data *d) { int pin = irq_to_pmu(d->irq); @@ -90,6 +74,27 @@ static void pmu_irq_handler(unsigned int irq, struct irq_desc *desc) } } +static int __initdata gpio0_irqs[4] = { + IRQ_DOVE_GPIO_0_7, + IRQ_DOVE_GPIO_8_15, + IRQ_DOVE_GPIO_16_23, + IRQ_DOVE_GPIO_24_31, +}; + +static int __initdata gpio1_irqs[4] = { + IRQ_DOVE_HIGH_GPIO, + 0, + 0, + 0, +}; + +static int __initdata gpio2_irqs[4] = { + 0, + 0, + 0, + 0, +}; + void __init dove_init_irq(void) { int i; @@ -100,19 +105,14 @@ void __init dove_init_irq(void) /* * Initialize gpiolib for GPIOs 0-71. */ - orion_gpio_init(0, 32, DOVE_GPIO_LO_VIRT_BASE, 0, - IRQ_DOVE_GPIO_START); - irq_set_chained_handler(IRQ_DOVE_GPIO_0_7, gpio_irq_handler); - irq_set_chained_handler(IRQ_DOVE_GPIO_8_15, gpio_irq_handler); - irq_set_chained_handler(IRQ_DOVE_GPIO_16_23, gpio_irq_handler); - irq_set_chained_handler(IRQ_DOVE_GPIO_24_31, gpio_irq_handler); - - orion_gpio_init(32, 32, DOVE_GPIO_HI_VIRT_BASE, 0, - IRQ_DOVE_GPIO_START + 32); - irq_set_chained_handler(IRQ_DOVE_HIGH_GPIO, gpio_irq_handler); - - orion_gpio_init(64, 8, DOVE_GPIO2_VIRT_BASE, 0, - IRQ_DOVE_GPIO_START + 64); + orion_gpio_init(NULL, 0, 32, (void __iomem *)DOVE_GPIO_LO_VIRT_BASE, 0, + IRQ_DOVE_GPIO_START, gpio0_irqs); + + orion_gpio_init(NULL, 32, 32, (void __iomem *)DOVE_GPIO_HI_VIRT_BASE, 0, + IRQ_DOVE_GPIO_START + 32, gpio1_irqs); + + orion_gpio_init(NULL, 64, 8, (void __iomem *)DOVE_GPIO2_VIRT_BASE, 0, + IRQ_DOVE_GPIO_START + 64, gpio2_irqs); /* * Mask and clear PMU interrupts diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index 373c3c00d24c..c0bc83a7663e 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -115,7 +115,7 @@ static __init int exynos_pm_dt_parse_domains(void) } #endif /* CONFIG_OF */ -static __init void exynos_pm_add_dev_to_genpd(struct platform_device *pdev, +static __init __maybe_unused void exynos_pm_add_dev_to_genpd(struct platform_device *pdev, struct exynos_pm_domain *pd) { if (pdev->dev.bus) { diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 7aa6313fb167..f69ca4680049 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -223,7 +223,7 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[per3_gate], "per", "imx-fb.0"); clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0"); clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx-fb.0"); - clk_register_clkdev(clk[csi_ahb_gate], NULL, "mx2-camera.0"); + clk_register_clkdev(clk[csi_ahb_gate], "ahb", "mx2-camera.0"); clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc"); clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc"); clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc"); @@ -250,8 +250,10 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx-i2c.1"); clk_register_clkdev(clk[owire_ipg_gate], NULL, "mxc_w1.0"); clk_register_clkdev(clk[kpp_ipg_gate], NULL, "imx-keypad"); - clk_register_clkdev(clk[emma_ahb_gate], "ahb", "imx-emma"); - clk_register_clkdev(clk[emma_ipg_gate], "ipg", "imx-emma"); + clk_register_clkdev(clk[emma_ahb_gate], "emma-ahb", "mx2-camera.0"); + clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "mx2-camera.0"); + clk_register_clkdev(clk[emma_ahb_gate], "ahb", "m2m-emmaprp.0"); + clk_register_clkdev(clk[emma_ipg_gate], "ipg", "m2m-emmaprp.0"); clk_register_clkdev(clk[iim_ipg_gate], "iim", NULL); clk_register_clkdev(clk[gpio_ipg_gate], "gpio", NULL); clk_register_clkdev(clk[brom_ahb_gate], "brom", NULL); diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c index 8e19e70f90f9..1253af2d9971 100644 --- a/arch/arm/mach-imx/clk-imx31.c +++ b/arch/arm/mach-imx/clk-imx31.c @@ -130,7 +130,7 @@ int __init mx31_clocks_init(unsigned long fref) clk_register_clkdev(clk[nfc], NULL, "mxc_nand.0"); clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core"); clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb"); - clk_register_clkdev(clk[kpp_gate], "kpp", NULL); + clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad"); clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.0"); clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.0"); clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0"); diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index f6086693ebd2..4bdcaa97bd98 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -303,6 +303,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_prepare_enable(clk[aips_tz2]); /* fec */ clk_prepare_enable(clk[spba]); clk_prepare_enable(clk[emi_fast_gate]); /* fec */ + clk_prepare_enable(clk[emi_slow_gate]); /* eim */ clk_prepare_enable(clk[tmax1]); clk_prepare_enable(clk[tmax2]); /* esdhc2, fec */ clk_prepare_enable(clk[tmax3]); /* esdhc1, esdhc4 */ diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index ebf680bebdf2..3fa6c51390da 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/device.h> +#include <linux/export.h> #include <linux/spinlock.h> #include <linux/interrupt.h> #include <linux/irq.h> diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 7b1055c8e0b9..3b2267529f5e 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -456,7 +456,7 @@ static void __init ap_init_timer(void) clk = clk_get_sys("ap_timer", NULL); BUG_ON(IS_ERR(clk)); - clk_enable(clk); + clk_prepare_enable(clk); rate = clk_get_rate(clk); writel(0, TIMER0_VA_BASE + TIMER_CTRL); diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 199764fe0fb0..ca5c15a4e626 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -80,6 +80,35 @@ config MACH_IB62X0_DT RaidSonic IB-NAS6210 & IB-NAS6220 devices, using Flattened Device Tree. +config MACH_TS219_DT + bool "Device Tree for QNAP TS-11X, TS-21X NAS" + select ARCH_KIRKWOOD_DT + select ARM_APPENDED_DTB + select ARM_ATAG_DTB_COMPAT + help + Say 'Y' here if you want your kernel to support the QNAP + TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and + TS-219P+ Turbo NAS devices using Fattened Device Tree. + There are two different Device Tree descriptions, depending + on if the device is based on an if the board uses the MV6281 + or MV6282. If you have the wrong one, the buttons will not + work. + +config MACH_GOFLEXNET_DT + bool "Seagate GoFlex Net (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Seagate GoFlex Net (Flattened Device Tree). + +config MACH_LSXL_DT + bool "Buffalo Linkstation LS-XHL, LS-CHLv2 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using + Flattened Device Tree. + config MACH_TS219 bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" help diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index d2b05907b10e..055c85a1cc46 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -25,3 +25,6 @@ obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o +obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o +obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o +obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index 02edbdf5b065..a5717558ee89 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -7,3 +7,7 @@ dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb +dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-qnap-ts219.dtb +dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb +dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb +dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c index 58c2d68f9443..4ab35065a144 100644 --- a/arch/arm/mach-kirkwood/board-dnskw.c +++ b/arch/arm/mach-kirkwood/board-dnskw.c @@ -14,13 +14,11 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/i2c.h> #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> #include <linux/of.h> #include <linux/gpio.h> #include <linux/input.h> -#include <linux/gpio_keys.h> #include <linux/gpio-fan.h> #include <linux/leds.h> #include <asm/mach-types.h> @@ -35,10 +33,6 @@ static struct mv643xx_eth_platform_data dnskw_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -static struct mv_sata_platform_data dnskw_sata_data = { - .n_ports = 2, -}; - static unsigned int dnskw_mpp_config[] __initdata = { MPP13_UART1_TXD, /* Custom ... */ MPP14_UART1_RXD, /* ... Controller (DNS-320 only) */ @@ -73,132 +67,6 @@ static unsigned int dnskw_mpp_config[] __initdata = { 0 }; -static struct gpio_led dns325_led_pins[] = { - { - .name = "dns325:white:power", - .gpio = 26, - .active_low = 1, - .default_trigger = "default-on", - }, - { - .name = "dns325:white:usb", - .gpio = 43, - .active_low = 1, - }, - { - .name = "dns325:red:l_hdd", - .gpio = 28, - .active_low = 1, - }, - { - .name = "dns325:red:r_hdd", - .gpio = 27, - .active_low = 1, - }, - { - .name = "dns325:red:usb", - .gpio = 29, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data dns325_led_data = { - .num_leds = ARRAY_SIZE(dns325_led_pins), - .leds = dns325_led_pins, -}; - -static struct platform_device dns325_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &dns325_led_data, - }, -}; - -static struct gpio_led dns320_led_pins[] = { - { - .name = "dns320:blue:power", - .gpio = 26, - .active_low = 1, - .default_trigger = "default-on", - }, - { - .name = "dns320:blue:usb", - .gpio = 43, - .active_low = 1, - }, - { - .name = "dns320:orange:l_hdd", - .gpio = 28, - .active_low = 1, - }, - { - .name = "dns320:orange:r_hdd", - .gpio = 27, - .active_low = 1, - }, - { - .name = "dns320:orange:usb", - .gpio = 35, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data dns320_led_data = { - .num_leds = ARRAY_SIZE(dns320_led_pins), - .leds = dns320_led_pins, -}; - -static struct platform_device dns320_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &dns320_led_data, - }, -}; - -static struct i2c_board_info dns325_i2c_board_info[] __initdata = { - { - I2C_BOARD_INFO("lm75", 0x48), - }, - /* Something at 0x0c also */ -}; - -static struct gpio_keys_button dnskw_button_pins[] = { - { - .code = KEY_POWER, - .gpio = 34, - .desc = "Power button", - .active_low = 1, - }, - { - .code = KEY_EJECTCD, - .gpio = 47, - .desc = "USB unmount button", - .active_low = 1, - }, - { - .code = KEY_RESTART, - .gpio = 48, - .desc = "Reset button", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data dnskw_button_data = { - .buttons = dnskw_button_pins, - .nbuttons = ARRAY_SIZE(dnskw_button_pins), -}; - -static struct platform_device dnskw_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &dnskw_button_data, - } -}; - /* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */ static struct gpio_fan_speed dnskw_fan_speed[] = { { 0, 0 }, @@ -245,20 +113,9 @@ void __init dnskw_init(void) kirkwood_ehci_init(); kirkwood_ge00_init(&dnskw_ge00_data); - kirkwood_sata_init(&dnskw_sata_data); - kirkwood_i2c_init(); - platform_device_register(&dnskw_button_device); platform_device_register(&dnskw_fan_device); - if (of_machine_is_compatible("dlink,dns-325")) { - i2c_register_board_info(0, dns325_i2c_board_info, - ARRAY_SIZE(dns325_i2c_board_info)); - platform_device_register(&dns325_led_device); - - } else if (of_machine_is_compatible("dlink,dns-320")) - platform_device_register(&dns320_led_device); - /* Register power-off GPIO. */ if (gpio_request(36, "dnskw:power:off") == 0 && gpio_direction_output(36, 0) == 0) diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c index 55e357ab2923..aeb234d0d0e3 100644 --- a/arch/arm/mach-kirkwood/board-dreamplug.c +++ b/arch/arm/mach-kirkwood/board-dreamplug.c @@ -14,7 +14,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/mtd/partitions.h> #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> #include <linux/of.h> @@ -23,7 +22,6 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/gpio.h> -#include <linux/leds.h> #include <linux/mtd/physmap.h> #include <linux/spi/flash.h> #include <linux/spi/spi.h> @@ -36,42 +34,6 @@ #include "common.h" #include "mpp.h" -struct mtd_partition dreamplug_partitions[] = { - { - .name = "u-boot", - .size = SZ_512K, - .offset = 0, - }, - { - .name = "u-boot env", - .size = SZ_64K, - .offset = SZ_512K + SZ_512K, - }, - { - .name = "dtb", - .size = SZ_64K, - .offset = SZ_512K + SZ_512K + SZ_512K, - }, -}; - -static const struct flash_platform_data dreamplug_spi_slave_data = { - .type = "mx25l1606e", - .name = "spi_flash", - .parts = dreamplug_partitions, - .nr_parts = ARRAY_SIZE(dreamplug_partitions), -}; - -static struct spi_board_info __initdata dreamplug_spi_slave_info[] = { - { - .modalias = "m25p80", - .platform_data = &dreamplug_spi_slave_data, - .irq = -1, - .max_speed_hz = 50000000, - .bus_num = 0, - .chip_select = 0, - }, -}; - static struct mv643xx_eth_platform_data dreamplug_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), }; @@ -80,45 +42,10 @@ static struct mv643xx_eth_platform_data dreamplug_ge01_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(1), }; -static struct mv_sata_platform_data dreamplug_sata_data = { - .n_ports = 1, -}; - static struct mvsdio_platform_data dreamplug_mvsdio_data = { /* unfortunately the CD signal has not been connected */ }; -static struct gpio_led dreamplug_led_pins[] = { - { - .name = "dreamplug:blue:bluetooth", - .gpio = 47, - .active_low = 1, - }, - { - .name = "dreamplug:green:wifi", - .gpio = 48, - .active_low = 1, - }, - { - .name = "dreamplug:green:wifi_ap", - .gpio = 49, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data dreamplug_led_data = { - .leds = dreamplug_led_pins, - .num_leds = ARRAY_SIZE(dreamplug_led_pins), -}; - -static struct platform_device dreamplug_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &dreamplug_led_data, - } -}; - static unsigned int dreamplug_mpp_config[] __initdata = { MPP0_SPI_SCn, MPP1_SPI_MOSI, @@ -137,15 +64,8 @@ void __init dreamplug_init(void) */ kirkwood_mpp_conf(dreamplug_mpp_config); - spi_register_board_info(dreamplug_spi_slave_info, - ARRAY_SIZE(dreamplug_spi_slave_info)); - kirkwood_spi_init(); - kirkwood_ehci_init(); kirkwood_ge00_init(&dreamplug_ge00_data); kirkwood_ge01_init(&dreamplug_ge01_data); - kirkwood_sata_init(&dreamplug_sata_data); kirkwood_sdio_init(&dreamplug_mvsdio_data); - - platform_device_register(&dreamplug_leds); } diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index edc3f8a9d45e..e4eb450de301 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -18,6 +18,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <mach/bridge-regs.h> +#include <plat/irq.h> #include "common.h" static struct of_device_id kirkwood_dt_match_table[] __initdata = { @@ -25,6 +26,16 @@ static struct of_device_id kirkwood_dt_match_table[] __initdata = { { } }; +struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL), + OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0", + NULL), + OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL), + OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL), + OF_DEV_AUXDATA("marvell,orion-nand", 0xf4000000, "orion_nand", NULL), + {}, +}; + static void __init kirkwood_dt_init(void) { pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk); @@ -47,7 +58,6 @@ static void __init kirkwood_dt_init(void) kirkwood_clk_init(); /* internal devices that every board has */ - kirkwood_wdt_init(); kirkwood_xor0_init(); kirkwood_xor1_init(); kirkwood_crypto_init(); @@ -68,7 +78,17 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("raidsonic,ib-nas62x0")) ib62x0_init(); - of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL); + if (of_machine_is_compatible("qnap,ts219")) + qnap_dt_ts219_init(); + + if (of_machine_is_compatible("seagate,goflexnet")) + goflexnet_init(); + + if (of_machine_is_compatible("buffalo,lsxl")) + lsxl_init(); + + of_platform_populate(NULL, kirkwood_dt_match_table, + kirkwood_auxdata_lookup, NULL); } static const char *kirkwood_dt_board_compat[] = { @@ -77,6 +97,9 @@ static const char *kirkwood_dt_board_compat[] = { "dlink,dns-325", "iom,iconnect", "raidsonic,ib-nas62x0", + "qnap,ts219", + "seagate,goflexnet", + "buffalo,lsxl", NULL }; @@ -84,7 +107,7 @@ DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)") /* Maintainer: Jason Cooper <jason@lakedaemon.net> */ .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, + .init_irq = orion_dt_init_irq, .timer = &kirkwood_timer, .init_machine = kirkwood_dt_init, .restart = kirkwood_restart, diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c b/arch/arm/mach-kirkwood/board-goflexnet.c new file mode 100644 index 000000000000..413e2c8ef5fe --- /dev/null +++ b/arch/arm/mach-kirkwood/board-goflexnet.c @@ -0,0 +1,71 @@ +/* + * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net> + * + * arch/arm/mach-kirkwood/board-goflexnet.c + * + * Seagate GoFlext Net Board Init for drivers not converted to + * flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Copied and modified for Seagate GoFlex Net support by + * Joshua Coombs <josh.coombs@gmail.com> based on ArchLinux ARM's + * GoFlex kernel patches. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ata_platform.h> +#include <linux/mv643xx_eth.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_fdt.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/gpio.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <mach/kirkwood.h> +#include <mach/bridge-regs.h> +#include <plat/mvsdio.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data goflexnet_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static unsigned int goflexnet_mpp_config[] __initdata = { + MPP29_GPIO, /* USB Power Enable */ + MPP47_GPIO, /* LED Orange */ + MPP46_GPIO, /* LED Green */ + MPP45_GPIO, /* LED Left Capacity 3 */ + MPP44_GPIO, /* LED Left Capacity 2 */ + MPP43_GPIO, /* LED Left Capacity 1 */ + MPP42_GPIO, /* LED Left Capacity 0 */ + MPP41_GPIO, /* LED Right Capacity 3 */ + MPP40_GPIO, /* LED Right Capacity 2 */ + MPP39_GPIO, /* LED Right Capacity 1 */ + MPP38_GPIO, /* LED Right Capacity 0 */ + 0 +}; + +void __init goflexnet_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(goflexnet_mpp_config); + + if (gpio_request(29, "USB Power Enable") != 0 || + gpio_direction_output(29, 1) != 0) + pr_err("can't setup GPIO 29 (USB Power Enable)\n"); + kirkwood_ehci_init(); + + kirkwood_ge00_init(&goflexnet_ge00_data); +} diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c index eddf1df8891f..cfc47f80e734 100644 --- a/arch/arm/mach-kirkwood/board-ib62x0.c +++ b/arch/arm/mach-kirkwood/board-ib62x0.c @@ -18,9 +18,7 @@ #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> #include <linux/gpio.h> -#include <linux/gpio_keys.h> #include <linux/input.h> -#include <linux/leds.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/kirkwood.h> @@ -33,10 +31,6 @@ static struct mv643xx_eth_platform_data ib62x0_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -static struct mv_sata_platform_data ib62x0_sata_data = { - .n_ports = 2, -}; - static unsigned int ib62x0_mpp_config[] __initdata = { MPP0_NF_IO2, MPP1_NF_IO3, @@ -55,69 +49,6 @@ static unsigned int ib62x0_mpp_config[] __initdata = { 0 }; -static struct gpio_led ib62x0_led_pins[] = { - { - .name = "ib62x0:green:os", - .default_trigger = "default-on", - .gpio = 25, - .active_low = 0, - }, - { - .name = "ib62x0:red:os", - .default_trigger = "none", - .gpio = 22, - .active_low = 0, - }, - { - .name = "ib62x0:red:usb_copy", - .default_trigger = "none", - .gpio = 27, - .active_low = 0, - }, -}; - -static struct gpio_led_platform_data ib62x0_led_data = { - .leds = ib62x0_led_pins, - .num_leds = ARRAY_SIZE(ib62x0_led_pins), -}; - -static struct platform_device ib62x0_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &ib62x0_led_data, - } -}; - -static struct gpio_keys_button ib62x0_button_pins[] = { - { - .code = KEY_COPY, - .gpio = 29, - .desc = "USB Copy", - .active_low = 1, - }, - { - .code = KEY_RESTART, - .gpio = 28, - .desc = "Reset", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data ib62x0_button_data = { - .buttons = ib62x0_button_pins, - .nbuttons = ARRAY_SIZE(ib62x0_button_pins), -}; - -static struct platform_device ib62x0_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &ib62x0_button_data, - } -}; - static void ib62x0_power_off(void) { gpio_set_value(IB62X0_GPIO_POWER_OFF, 1); @@ -132,9 +63,6 @@ void __init ib62x0_init(void) kirkwood_ehci_init(); kirkwood_ge00_init(&ib62x0_ge00_data); - kirkwood_sata_init(&ib62x0_sata_data); - platform_device_register(&ib62x0_led_device); - platform_device_register(&ib62x0_button_device); if (gpio_request(IB62X0_GPIO_POWER_OFF, "ib62x0:power:off") == 0 && gpio_direction_output(IB62X0_GPIO_POWER_OFF, 0) == 0) pm_power_off = ib62x0_power_off; diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c index b0d3cc49269d..d7a9198ed300 100644 --- a/arch/arm/mach-kirkwood/board-iconnect.c +++ b/arch/arm/mach-kirkwood/board-iconnect.c @@ -19,8 +19,6 @@ #include <linux/mtd/partitions.h> #include <linux/mv643xx_eth.h> #include <linux/gpio.h> -#include <linux/leds.h> -#include <linux/i2c.h> #include <linux/input.h> #include <linux/gpio_keys.h> #include <asm/mach/arch.h> @@ -32,50 +30,6 @@ static struct mv643xx_eth_platform_data iconnect_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(11), }; -static struct gpio_led iconnect_led_pins[] = { - { - .name = "led_level", - .gpio = 41, - .default_trigger = "default-on", - }, { - .name = "power:blue", - .gpio = 42, - .default_trigger = "timer", - }, { - .name = "power:red", - .gpio = 43, - }, { - .name = "usb1:blue", - .gpio = 44, - }, { - .name = "usb2:blue", - .gpio = 45, - }, { - .name = "usb3:blue", - .gpio = 46, - }, { - .name = "usb4:blue", - .gpio = 47, - }, { - .name = "otb:blue", - .gpio = 48, - }, -}; - -static struct gpio_led_platform_data iconnect_led_data = { - .leds = iconnect_led_pins, - .num_leds = ARRAY_SIZE(iconnect_led_pins), - .gpio_blink_set = orion_gpio_led_blink_set, -}; - -static struct platform_device iconnect_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &iconnect_led_data, - } -}; - static unsigned int iconnect_mpp_config[] __initdata = { MPP12_GPIO, MPP35_GPIO, @@ -90,12 +44,6 @@ static unsigned int iconnect_mpp_config[] __initdata = { 0 }; -static struct i2c_board_info __initdata iconnect_board_info[] = { - { - I2C_BOARD_INFO("lm63", 0x4c), - }, -}; - static struct mtd_partition iconnect_nand_parts[] = { { .name = "flash", @@ -142,15 +90,11 @@ void __init iconnect_init(void) { kirkwood_mpp_conf(iconnect_mpp_config); kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25); - kirkwood_i2c_init(); - i2c_register_board_info(0, iconnect_board_info, - ARRAY_SIZE(iconnect_board_info)); kirkwood_ehci_init(); kirkwood_ge00_init(&iconnect_ge00_data); platform_device_register(&iconnect_button_device); - platform_device_register(&iconnect_leds); } static int __init iconnect_pci_init(void) diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c new file mode 100644 index 000000000000..83d8975592f8 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-lsxl.c @@ -0,0 +1,135 @@ +/* + * Copyright 2012 (C), Michael Walle <michael@walle.cc> + * + * arch/arm/mach-kirkwood/board-lsxl.c + * + * Buffalo Linkstation LS-XHL and LS-CHLv2 init for drivers not + * converted to flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/partitions.h> +#include <linux/ata_platform.h> +#include <linux/spi/flash.h> +#include <linux/spi/spi.h> +#include <linux/mv643xx_eth.h> +#include <linux/gpio.h> +#include <linux/gpio-fan.h> +#include <linux/input.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/kirkwood.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data lsxl_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mv643xx_eth_platform_data lsxl_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +static unsigned int lsxl_mpp_config[] __initdata = { + MPP10_GPO, /* HDD Power Enable */ + MPP11_GPIO, /* USB Vbus Enable */ + MPP18_GPO, /* FAN High Enable# */ + MPP19_GPO, /* FAN Low Enable# */ + MPP36_GPIO, /* Function Blue LED */ + MPP37_GPIO, /* Alarm LED */ + MPP38_GPIO, /* Info LED */ + MPP39_GPIO, /* Power LED */ + MPP40_GPIO, /* Fan Lock */ + MPP41_GPIO, /* Function Button */ + MPP42_GPIO, /* Power Switch */ + MPP43_GPIO, /* Power Auto Switch */ + MPP48_GPIO, /* Function Red LED */ + 0 +}; + +#define LSXL_GPIO_FAN_HIGH 18 +#define LSXL_GPIO_FAN_LOW 19 +#define LSXL_GPIO_FAN_LOCK 40 + +static struct gpio_fan_alarm lsxl_alarm = { + .gpio = LSXL_GPIO_FAN_LOCK, +}; + +static struct gpio_fan_speed lsxl_speeds[] = { + { + .rpm = 0, + .ctrl_val = 3, + }, { + .rpm = 1500, + .ctrl_val = 1, + }, { + .rpm = 3250, + .ctrl_val = 2, + }, { + .rpm = 5000, + .ctrl_val = 0, + } +}; + +static int lsxl_gpio_list[] = { + LSXL_GPIO_FAN_HIGH, LSXL_GPIO_FAN_LOW, +}; + +static struct gpio_fan_platform_data lsxl_fan_data = { + .num_ctrl = ARRAY_SIZE(lsxl_gpio_list), + .ctrl = lsxl_gpio_list, + .alarm = &lsxl_alarm, + .num_speed = ARRAY_SIZE(lsxl_speeds), + .speed = lsxl_speeds, +}; + +static struct platform_device lsxl_fan_device = { + .name = "gpio-fan", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &lsxl_fan_data, + }, +}; + +/* + * On the LS-XHL/LS-CHLv2, the shutdown process is following: + * - Userland monitors key events until the power switch goes to off position + * - The board reboots + * - U-boot starts and goes into an idle mode waiting for the user + * to move the switch to ON position + * + */ +static void lsxl_power_off(void) +{ + kirkwood_restart('h', NULL); +} + +#define LSXL_GPIO_HDD_POWER 10 +#define LSXL_GPIO_USB_POWER 11 + +void __init lsxl_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(lsxl_mpp_config); + + /* usb and sata power on */ + gpio_set_value(LSXL_GPIO_USB_POWER, 1); + gpio_set_value(LSXL_GPIO_HDD_POWER, 1); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&lsxl_ge00_data); + kirkwood_ge01_init(&lsxl_ge01_data); + platform_device_register(&lsxl_fan_device); + + /* register power-off method */ + pm_power_off = lsxl_power_off; +} diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c new file mode 100644 index 000000000000..1750e68506c1 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-ts219.c @@ -0,0 +1,82 @@ +/* + * + * QNAP TS-11x/TS-21x Turbo NAS Board Setup via DT + * + * Copyright (C) 2012 Andrew Lunn <andrew@lunn.ch> + * + * Based on the board file ts219-setup.c: + * + * Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com> + * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mv643xx_eth.h> +#include <linux/ata_platform.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/kirkwood.h> +#include "common.h" +#include "mpp.h" +#include "tsx1x-common.h" + +static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +static unsigned int qnap_ts219_mpp_config[] __initdata = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP4_SATA1_ACTn, + MPP5_SATA0_ACTn, + MPP8_TW0_SDA, + MPP9_TW0_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP13_UART1_TXD, /* PIC controller */ + MPP14_UART1_RXD, /* PIC controller */ + MPP15_GPIO, /* USB Copy button (on devices with 88F6281) */ + MPP16_GPIO, /* Reset button (on devices with 88F6281) */ + MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */ + MPP37_GPIO, /* Reset button (on devices with 88F6282) */ + MPP43_GPIO, /* USB Copy button (on devices with 88F6282) */ + MPP44_GPIO, /* Board ID: 0: TS-11x, 1: TS-21x */ + 0 +}; + +void __init qnap_dt_ts219_init(void) +{ + u32 dev, rev; + + kirkwood_mpp_conf(qnap_ts219_mpp_config); + + kirkwood_pcie_id(&dev, &rev); + if (dev == MV88F6282_DEV_ID) + qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); + + kirkwood_ge00_init(&qnap_ts219_ge00_data); + kirkwood_ehci_init(); + + pm_power_off = qnap_tsx1x_power_off; +} + +/* FIXME: Will not work with DT. Maybe use MPP40_GPIO? */ +static int __init ts219_pci_init(void) +{ + if (machine_is_ts219()) + kirkwood_pcie_init(KW_PCIE0); + + return 0; +} +subsys_initcall(ts219_pci_init); diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index c9201539ffbd..c4b64adcbfce 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -17,6 +17,7 @@ #include <linux/dma-mapping.h> #include <linux/clk-provider.h> #include <linux/spinlock.h> +#include <linux/mv643xx_i2c.h> #include <net/dsa.h> #include <asm/page.h> #include <asm/timex.h> @@ -276,6 +277,7 @@ void __init kirkwood_clk_init(void) orion_clkdev_add("0", "pcie", pex0); orion_clkdev_add("1", "pcie", pex1); orion_clkdev_add(NULL, "kirkwood-i2s", audio); + orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".0", runit); /* Marvell says runit is used by SPI, UART, NAND, TWSI, ..., * so should never be gated. diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 9248fa2c165b..304dd1abfdca 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -58,6 +58,11 @@ void dreamplug_init(void); #else static inline void dreamplug_init(void) {}; #endif +#ifdef CONFIG_MACH_TS219_DT +void qnap_dt_ts219_init(void); +#else +static inline void qnap_dt_ts219_init(void) {}; +#endif #ifdef CONFIG_MACH_DLINK_KIRKWOOD_DT void dnskw_init(void); @@ -77,6 +82,18 @@ void ib62x0_init(void); static inline void ib62x0_init(void) {}; #endif +#ifdef CONFIG_MACH_GOFLEXNET_DT +void goflexnet_init(void); +#else +static inline void goflexnet_init(void) {}; +#endif + +#ifdef CONFIG_MACH_LSXL_DT +void lsxl_init(void); +#else +static inline void lsxl_init(void) {}; +#endif + /* early init functions not converted to fdt yet */ char *kirkwood_id(void); void kirkwood_l2_init(void); diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c index c4c68e5b94f1..720063ffa19d 100644 --- a/arch/arm/mach-kirkwood/irq.c +++ b/arch/arm/mach-kirkwood/irq.c @@ -9,20 +9,23 @@ */ #include <linux/gpio.h> #include <linux/kernel.h> -#include <linux/init.h> #include <linux/irq.h> -#include <linux/io.h> #include <mach/bridge-regs.h> #include <plat/irq.h> -#include "common.h" -static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - BUG_ON(irq < IRQ_KIRKWOOD_GPIO_LOW_0_7); - BUG_ON(irq > IRQ_KIRKWOOD_GPIO_HIGH_16_23); +static int __initdata gpio0_irqs[4] = { + IRQ_KIRKWOOD_GPIO_LOW_0_7, + IRQ_KIRKWOOD_GPIO_LOW_8_15, + IRQ_KIRKWOOD_GPIO_LOW_16_23, + IRQ_KIRKWOOD_GPIO_LOW_24_31, +}; - orion_gpio_irq_handler((irq - IRQ_KIRKWOOD_GPIO_LOW_0_7) << 3); -} +static int __initdata gpio1_irqs[4] = { + IRQ_KIRKWOOD_GPIO_HIGH_0_7, + IRQ_KIRKWOOD_GPIO_HIGH_8_15, + IRQ_KIRKWOOD_GPIO_HIGH_16_23, + 0, +}; void __init kirkwood_init_irq(void) { @@ -32,17 +35,8 @@ void __init kirkwood_init_irq(void) /* * Initialize gpiolib for GPIOs 0-49. */ - orion_gpio_init(0, 32, GPIO_LOW_VIRT_BASE, 0, - IRQ_KIRKWOOD_GPIO_START); - irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_0_7, gpio_irq_handler); - irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_8_15, gpio_irq_handler); - irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_16_23, gpio_irq_handler); - irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_24_31, gpio_irq_handler); - - orion_gpio_init(32, 18, GPIO_HIGH_VIRT_BASE, 0, - IRQ_KIRKWOOD_GPIO_START + 32); - irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_0_7, gpio_irq_handler); - irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_8_15, gpio_irq_handler); - irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_16_23, - gpio_irq_handler); + orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_LOW_VIRT_BASE, 0, + IRQ_KIRKWOOD_GPIO_START, gpio0_irqs); + orion_gpio_init(NULL, 32, 18, (void __iomem *)GPIO_HIGH_VIRT_BASE, 0, + IRQ_KIRKWOOD_GPIO_START + 32, gpio1_irqs); } diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c index f516e74ce0d5..5c3d61ee729a 100644 --- a/arch/arm/mach-mmp/gplugd.c +++ b/arch/arm/mach-mmp/gplugd.c @@ -14,6 +14,7 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> +#include <mach/irqs.h> #include <mach/pxa168.h> #include <mach/mfp-pxa168.h> diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c index e421b701663b..eff9a750bbe2 100644 --- a/arch/arm/mach-mv78xx0/irq.c +++ b/arch/arm/mach-mv78xx0/irq.c @@ -9,19 +9,17 @@ */ #include <linux/gpio.h> #include <linux/kernel.h> -#include <linux/init.h> -#include <linux/pci.h> #include <linux/irq.h> #include <mach/bridge-regs.h> #include <plat/irq.h> #include "common.h" -static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - BUG_ON(irq < IRQ_MV78XX0_GPIO_0_7 || irq > IRQ_MV78XX0_GPIO_24_31); - - orion_gpio_irq_handler((irq - IRQ_MV78XX0_GPIO_0_7) << 3); -} +static int __initdata gpio0_irqs[4] = { + IRQ_MV78XX0_GPIO_0_7, + IRQ_MV78XX0_GPIO_8_15, + IRQ_MV78XX0_GPIO_16_23, + IRQ_MV78XX0_GPIO_24_31, +}; void __init mv78xx0_init_irq(void) { @@ -34,11 +32,7 @@ void __init mv78xx0_init_irq(void) * registers for core #1 are at an offset of 0x18 from those of * core #0.) */ - orion_gpio_init(0, 32, GPIO_VIRT_BASE, + orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_VIRT_BASE, mv78xx0_core_index() ? 0x18 : 0, - IRQ_MV78XX0_GPIO_START); - irq_set_chained_handler(IRQ_MV78XX0_GPIO_0_7, gpio_irq_handler); - irq_set_chained_handler(IRQ_MV78XX0_GPIO_8_15, gpio_irq_handler); - irq_set_chained_handler(IRQ_MV78XX0_GPIO_16_23, gpio_irq_handler); - irq_set_chained_handler(IRQ_MV78XX0_GPIO_24_31, gpio_irq_handler); + IRQ_MV78XX0_GPIO_START, gpio0_irqs); } diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index ccdf83b17cf1..9a8bbda195b2 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -2,9 +2,6 @@ if ARCH_MXS source "arch/arm/mach-mxs/devices/Kconfig" -config MXS_OCOTP - bool - config SOC_IMX23 bool select ARM_AMBA @@ -66,7 +63,6 @@ config MACH_MX28EVK select MXS_HAVE_PLATFORM_MXS_SAIF select MXS_HAVE_PLATFORM_MXS_I2C select MXS_HAVE_PLATFORM_RTC_STMP3XXX - select MXS_OCOTP help Include support for MX28EVK platform. This includes specific configurations for the board and its peripherals. @@ -94,7 +90,6 @@ config MODULE_M28 select MXS_HAVE_PLATFORM_MXS_I2C select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXSFB - select MXS_OCOTP config MODULE_APX4 bool @@ -106,7 +101,6 @@ config MODULE_APX4 select MXS_HAVE_PLATFORM_MXS_I2C select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXS_SAIF - select MXS_OCOTP config MACH_TX28 bool "Ka-Ro TX28 module" diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index e41590ccb437..fed3695a1339 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -1,7 +1,6 @@ # Common support -obj-y := devices.o icoll.o iomux.o system.o timer.o mm.o +obj-y := devices.o icoll.o iomux.o ocotp.o system.o timer.o mm.o -obj-$(CONFIG_MXS_OCOTP) += ocotp.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index dd0fbf76ac79..dd2db025f778 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -62,6 +62,7 @@ config ARCH_OMAP4 select PM_OPP if PM select USB_ARCH_HAS_EHCI if USB_SUPPORT select ARM_CPU_SUSPEND if PM + select ARCH_NEEDS_CPU_IDLE_COUPLED config SOC_OMAP5 bool "TI OMAP5" diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index 02d15bbd4e35..ee05e193fc61 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -21,6 +21,7 @@ #include "common.h" #include "pm.h" #include "prm.h" +#include "clockdomain.h" /* Machine specific information */ struct omap4_idle_statedata { @@ -47,10 +48,14 @@ static struct omap4_idle_statedata omap4_idle_data[] = { }, }; -static struct powerdomain *mpu_pd, *cpu0_pd, *cpu1_pd; +static struct powerdomain *mpu_pd, *cpu_pd[NR_CPUS]; +static struct clockdomain *cpu_clkdm[NR_CPUS]; + +static atomic_t abort_barrier; +static bool cpu_done[NR_CPUS]; /** - * omap4_enter_idle - Programs OMAP4 to enter the specified state + * omap4_enter_idle_coupled_[simple/coupled] - OMAP4 cpuidle entry functions * @dev: cpuidle device * @drv: cpuidle driver * @index: the index of state to be entered @@ -59,60 +64,84 @@ static struct powerdomain *mpu_pd, *cpu0_pd, *cpu1_pd; * specified low power state selected by the governor. * Returns the amount of time spent in the low power state. */ -static int omap4_enter_idle(struct cpuidle_device *dev, +static int omap4_enter_idle_simple(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + local_fiq_disable(); + omap_do_wfi(); + local_fiq_enable(); + + return index; +} + +static int omap4_enter_idle_coupled(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { struct omap4_idle_statedata *cx = &omap4_idle_data[index]; - u32 cpu1_state; int cpu_id = smp_processor_id(); local_fiq_disable(); /* - * CPU0 has to stay ON (i.e in C1) until CPU1 is OFF state. + * CPU0 has to wait and stay ON until CPU1 is OFF state. * This is necessary to honour hardware recommondation * of triggeing all the possible low power modes once CPU1 is * out of coherency and in OFF mode. - * Update dev->last_state so that governor stats reflects right - * data. */ - cpu1_state = pwrdm_read_pwrst(cpu1_pd); - if (cpu1_state != PWRDM_POWER_OFF) { - index = drv->safe_state_index; - cx = &omap4_idle_data[index]; + if (dev->cpu == 0 && cpumask_test_cpu(1, cpu_online_mask)) { + while (pwrdm_read_pwrst(cpu_pd[1]) != PWRDM_POWER_OFF) { + cpu_relax(); + + /* + * CPU1 could have already entered & exited idle + * without hitting off because of a wakeup + * or a failed attempt to hit off mode. Check for + * that here, otherwise we could spin forever + * waiting for CPU1 off. + */ + if (cpu_done[1]) + goto fail; + + } } - if (index > 0) - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu_id); + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu_id); /* * Call idle CPU PM enter notifier chain so that * VFP and per CPU interrupt context is saved. */ - if (cx->cpu_state == PWRDM_POWER_OFF) - cpu_pm_enter(); - - pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state); - omap_set_pwrdm_state(mpu_pd, cx->mpu_state); - - /* - * Call idle CPU cluster PM enter notifier chain - * to save GIC and wakeupgen context. - */ - if ((cx->mpu_state == PWRDM_POWER_RET) && - (cx->mpu_logic_state == PWRDM_POWER_OFF)) - cpu_cluster_pm_enter(); + cpu_pm_enter(); + + if (dev->cpu == 0) { + pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state); + omap_set_pwrdm_state(mpu_pd, cx->mpu_state); + + /* + * Call idle CPU cluster PM enter notifier chain + * to save GIC and wakeupgen context. + */ + if ((cx->mpu_state == PWRDM_POWER_RET) && + (cx->mpu_logic_state == PWRDM_POWER_OFF)) + cpu_cluster_pm_enter(); + } omap4_enter_lowpower(dev->cpu, cx->cpu_state); + cpu_done[dev->cpu] = true; + + /* Wakeup CPU1 only if it is not offlined */ + if (dev->cpu == 0 && cpumask_test_cpu(1, cpu_online_mask)) { + clkdm_wakeup(cpu_clkdm[1]); + clkdm_allow_idle(cpu_clkdm[1]); + } /* * Call idle CPU PM exit notifier chain to restore - * VFP and per CPU IRQ context. Only CPU0 state is - * considered since CPU1 is managed by CPU hotplug. + * VFP and per CPU IRQ context. */ - if (pwrdm_read_prev_pwrst(cpu0_pd) == PWRDM_POWER_OFF) - cpu_pm_exit(); + cpu_pm_exit(); /* * Call idle CPU cluster PM exit notifier chain @@ -121,8 +150,11 @@ static int omap4_enter_idle(struct cpuidle_device *dev, if (omap4_mpuss_read_prev_context_state()) cpu_cluster_pm_exit(); - if (index > 0) - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu_id); + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu_id); + +fail: + cpuidle_coupled_parallel_barrier(dev, &abort_barrier); + cpu_done[dev->cpu] = false; local_fiq_enable(); @@ -141,7 +173,7 @@ struct cpuidle_driver omap4_idle_driver = { .exit_latency = 2 + 2, .target_residency = 5, .flags = CPUIDLE_FLAG_TIME_VALID, - .enter = omap4_enter_idle, + .enter = omap4_enter_idle_simple, .name = "C1", .desc = "MPUSS ON" }, @@ -149,8 +181,8 @@ struct cpuidle_driver omap4_idle_driver = { /* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */ .exit_latency = 328 + 440, .target_residency = 960, - .flags = CPUIDLE_FLAG_TIME_VALID, - .enter = omap4_enter_idle, + .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED, + .enter = omap4_enter_idle_coupled, .name = "C2", .desc = "MPUSS CSWR", }, @@ -158,8 +190,8 @@ struct cpuidle_driver omap4_idle_driver = { /* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */ .exit_latency = 460 + 518, .target_residency = 1100, - .flags = CPUIDLE_FLAG_TIME_VALID, - .enter = omap4_enter_idle, + .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED, + .enter = omap4_enter_idle_coupled, .name = "C3", .desc = "MPUSS OSWR", }, @@ -168,6 +200,16 @@ struct cpuidle_driver omap4_idle_driver = { .safe_state_index = 0, }; +/* + * For each cpu, setup the broadcast timer because local timers + * stops for the states above C1. + */ +static void omap_setup_broadcast_timer(void *arg) +{ + int cpu = smp_processor_id(); + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu); +} + /** * omap4_idle_init - Init routine for OMAP4 idle * @@ -180,19 +222,30 @@ int __init omap4_idle_init(void) unsigned int cpu_id = 0; mpu_pd = pwrdm_lookup("mpu_pwrdm"); - cpu0_pd = pwrdm_lookup("cpu0_pwrdm"); - cpu1_pd = pwrdm_lookup("cpu1_pwrdm"); - if ((!mpu_pd) || (!cpu0_pd) || (!cpu1_pd)) + cpu_pd[0] = pwrdm_lookup("cpu0_pwrdm"); + cpu_pd[1] = pwrdm_lookup("cpu1_pwrdm"); + if ((!mpu_pd) || (!cpu_pd[0]) || (!cpu_pd[1])) return -ENODEV; - dev = &per_cpu(omap4_idle_dev, cpu_id); - dev->cpu = cpu_id; + cpu_clkdm[0] = clkdm_lookup("mpu0_clkdm"); + cpu_clkdm[1] = clkdm_lookup("mpu1_clkdm"); + if (!cpu_clkdm[0] || !cpu_clkdm[1]) + return -ENODEV; + + /* Configure the broadcast timer on each cpu */ + on_each_cpu(omap_setup_broadcast_timer, NULL, 1); + + for_each_cpu(cpu_id, cpu_online_mask) { + dev = &per_cpu(omap4_idle_dev, cpu_id); + dev->cpu = cpu_id; + dev->coupled_cpus = *cpu_online_mask; - cpuidle_register_driver(&omap4_idle_driver); + cpuidle_register_driver(&omap4_idle_driver); - if (cpuidle_register_device(dev)) { - pr_err("%s: CPUidle register device failed\n", __func__); - return -EIO; + if (cpuidle_register_device(dev)) { + pr_err("%s: CPUidle register failed\n", __func__); + return -EIO; + } } return 0; diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 13d20c8a283d..2ff6d41ec6c6 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -130,6 +130,7 @@ static struct clock_event_device clockevent_gpt = { .name = "gp_timer", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .shift = 32, + .rating = 300, .set_next_event = omap2_gp_timer_set_next_event, .set_mode = omap2_gp_timer_set_mode, }; @@ -223,7 +224,8 @@ static void __init omap2_gp_clockevent_init(int gptimer_id, clockevent_delta2ns(3, &clockevent_gpt); /* Timer internal resynch latency. */ - clockevent_gpt.cpumask = cpumask_of(0); + clockevent_gpt.cpumask = cpu_possible_mask; + clockevent_gpt.irq = omap_dm_timer_get_irq(&clkev); clockevents_register_device(&clockevent_gpt); pr_info("OMAP clockevent source: GPTIMER%d at %lu Hz\n", diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c index b1b45fff776e..17da7091d310 100644 --- a/arch/arm/mach-orion5x/irq.c +++ b/arch/arm/mach-orion5x/irq.c @@ -11,19 +11,16 @@ */ #include <linux/gpio.h> #include <linux/kernel.h> -#include <linux/init.h> #include <linux/irq.h> -#include <linux/io.h> #include <mach/bridge-regs.h> #include <plat/irq.h> -#include "common.h" -static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - BUG_ON(irq < IRQ_ORION5X_GPIO_0_7 || irq > IRQ_ORION5X_GPIO_24_31); - - orion_gpio_irq_handler((irq - IRQ_ORION5X_GPIO_0_7) << 3); -} +static int __initdata gpio0_irqs[4] = { + IRQ_ORION5X_GPIO_0_7, + IRQ_ORION5X_GPIO_8_15, + IRQ_ORION5X_GPIO_16_23, + IRQ_ORION5X_GPIO_24_31, +}; void __init orion5x_init_irq(void) { @@ -32,9 +29,6 @@ void __init orion5x_init_irq(void) /* * Initialize gpiolib for GPIOs 0-31. */ - orion_gpio_init(0, 32, GPIO_VIRT_BASE, 0, IRQ_ORION5X_GPIO_START); - irq_set_chained_handler(IRQ_ORION5X_GPIO_0_7, gpio_irq_handler); - irq_set_chained_handler(IRQ_ORION5X_GPIO_8_15, gpio_irq_handler); - irq_set_chained_handler(IRQ_ORION5X_GPIO_16_23, gpio_irq_handler); - irq_set_chained_handler(IRQ_ORION5X_GPIO_24_31, gpio_irq_handler); + orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_VIRT_BASE, 0, + IRQ_ORION5X_GPIO_START, gpio0_irqs); } diff --git a/arch/arm/mach-prima2/timer.c b/arch/arm/mach-prima2/timer.c index 0d024b1e916d..f224107de7bc 100644 --- a/arch/arm/mach-prima2/timer.c +++ b/arch/arm/mach-prima2/timer.c @@ -132,11 +132,11 @@ static void sirfsoc_clocksource_resume(struct clocksource *cs) { int i; - for (i = 0; i < SIRFSOC_TIMER_REG_CNT; i++) + for (i = 0; i < SIRFSOC_TIMER_REG_CNT - 2; i++) writel_relaxed(sirfsoc_timer_reg_val[i], sirfsoc_timer_base + sirfsoc_timer_reg_list[i]); - writel_relaxed(sirfsoc_timer_reg_val[i - 2], sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO); - writel_relaxed(sirfsoc_timer_reg_val[i - 1], sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI); + writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 2], sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO); + writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 1], sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI); } static struct clock_event_device sirfsoc_clockevent = { diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 5905ed130e94..d89d87ae144c 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -953,12 +953,12 @@ static struct i2c_board_info raumfeld_connector_i2c_board_info __initdata = { static struct eeti_ts_platform_data eeti_ts_pdata = { .irq_active_high = 1, + .irq_gpio = GPIO_TOUCH_IRQ, }; static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = { .type = "eeti_ts", .addr = 0x0a, - .irq = PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ), .platform_data = &eeti_ts_pdata, }; diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index e24961109b70..d56b0f7f2b20 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -483,7 +483,7 @@ config MACH_NEO1973_GTA02 select I2C select POWER_SUPPLY select MACH_NEO1973 - select S3C2410_PWM + select S3C24XX_PWM select S3C_DEV_USB_HOST help Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone @@ -493,7 +493,7 @@ config MACH_RX1950 select S3C24XX_DCLK select PM_H1940 if PM select I2C - select S3C2410_PWM + select S3C24XX_PWM select S3C_DEV_NAND select S3C2410_IOTIMING if S3C2440_CPUFREQ select S3C2440_XTAL_16934400 diff --git a/arch/arm/mach-sa1100/leds-hackkit.c b/arch/arm/mach-sa1100/leds-hackkit.c index 6a2352436e62..f8e47235babe 100644 --- a/arch/arm/mach-sa1100/leds-hackkit.c +++ b/arch/arm/mach-sa1100/leds-hackkit.c @@ -10,6 +10,7 @@ * as cpu led, the green one is used as timer led. */ #include <linux/init.h> +#include <linux/io.h> #include <mach/hardware.h> #include <asm/leds.h> diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c index 8fd387bf31f0..b7344beec102 100644 --- a/arch/arm/mach-tegra/board-harmony-power.c +++ b/arch/arm/mach-tegra/board-harmony-power.c @@ -51,7 +51,7 @@ static struct regulator_init_data ldo0_data = { .consumer_supplies = tps658621_ldo0_supply, }; -#define HARMONY_REGULATOR_INIT(_id, _name, _supply, _minmv, _maxmv) \ +#define HARMONY_REGULATOR_INIT(_id, _name, _supply, _minmv, _maxmv, _on)\ static struct regulator_init_data _id##_data = { \ .supply_regulator = _supply, \ .constraints = { \ @@ -63,21 +63,22 @@ static struct regulator_init_data ldo0_data = { .valid_ops_mask = (REGULATOR_CHANGE_MODE | \ REGULATOR_CHANGE_STATUS | \ REGULATOR_CHANGE_VOLTAGE), \ + .always_on = _on, \ }, \ } -HARMONY_REGULATOR_INIT(sm0, "vdd_sm0", "vdd_sys", 725, 1500); -HARMONY_REGULATOR_INIT(sm1, "vdd_sm1", "vdd_sys", 725, 1500); -HARMONY_REGULATOR_INIT(sm2, "vdd_sm2", "vdd_sys", 3000, 4550); -HARMONY_REGULATOR_INIT(ldo1, "vdd_ldo1", "vdd_sm2", 725, 1500); -HARMONY_REGULATOR_INIT(ldo2, "vdd_ldo2", "vdd_sm2", 725, 1500); -HARMONY_REGULATOR_INIT(ldo3, "vdd_ldo3", "vdd_sm2", 1250, 3300); -HARMONY_REGULATOR_INIT(ldo4, "vdd_ldo4", "vdd_sm2", 1700, 2475); -HARMONY_REGULATOR_INIT(ldo5, "vdd_ldo5", NULL, 1250, 3300); -HARMONY_REGULATOR_INIT(ldo6, "vdd_ldo6", "vdd_sm2", 1250, 3300); -HARMONY_REGULATOR_INIT(ldo7, "vdd_ldo7", "vdd_sm2", 1250, 3300); -HARMONY_REGULATOR_INIT(ldo8, "vdd_ldo8", "vdd_sm2", 1250, 3300); -HARMONY_REGULATOR_INIT(ldo9, "vdd_ldo9", "vdd_sm2", 1250, 3300); +HARMONY_REGULATOR_INIT(sm0, "vdd_sm0", "vdd_sys", 725, 1500, 1); +HARMONY_REGULATOR_INIT(sm1, "vdd_sm1", "vdd_sys", 725, 1500, 1); +HARMONY_REGULATOR_INIT(sm2, "vdd_sm2", "vdd_sys", 3000, 4550, 1); +HARMONY_REGULATOR_INIT(ldo1, "vdd_ldo1", "vdd_sm2", 725, 1500, 1); +HARMONY_REGULATOR_INIT(ldo2, "vdd_ldo2", "vdd_sm2", 725, 1500, 0); +HARMONY_REGULATOR_INIT(ldo3, "vdd_ldo3", "vdd_sm2", 1250, 3300, 1); +HARMONY_REGULATOR_INIT(ldo4, "vdd_ldo4", "vdd_sm2", 1700, 2475, 1); +HARMONY_REGULATOR_INIT(ldo5, "vdd_ldo5", NULL, 1250, 3300, 1); +HARMONY_REGULATOR_INIT(ldo6, "vdd_ldo6", "vdd_sm2", 1250, 3300, 0); +HARMONY_REGULATOR_INIT(ldo7, "vdd_ldo7", "vdd_sm2", 1250, 3300, 0); +HARMONY_REGULATOR_INIT(ldo8, "vdd_ldo8", "vdd_sm2", 1250, 3300, 0); +HARMONY_REGULATOR_INIT(ldo9, "vdd_ldo9", "vdd_sm2", 1250, 3300, 1); #define TPS_REG(_id, _data) \ { \ @@ -119,9 +120,10 @@ static struct i2c_board_info __initdata harmony_regulators[] = { int __init harmony_regulator_init(void) { + regulator_register_always_on(0, "vdd_sys", + NULL, 0, 5000000); + if (machine_is_harmony()) { - regulator_register_always_on(0, "vdd_sys", - NULL, 0, 5000000); i2c_register_board_info(3, harmony_regulators, 1); } else { /* Harmony, booted using device tree */ struct device_node *np; diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index c2cdf6500f75..4e7d1182e8a3 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -358,7 +358,7 @@ void __init dma_contiguous_remap(void) if (end > arm_lowmem_limit) end = arm_lowmem_limit; if (start >= end) - return; + continue; map.pfn = __phys_to_pfn(start); map.virtual = __phys_to_virt(start); @@ -423,7 +423,7 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page) unsigned int pageno; unsigned long flags; void *ptr = NULL; - size_t align; + unsigned long align_mask; if (!pool->vaddr) { WARN(1, "coherent pool not initialised!\n"); @@ -435,11 +435,11 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page) * small, so align them to their order in pages, minimum is a page * size. This helps reduce fragmentation of the DMA space. */ - align = PAGE_SIZE << get_order(size); + align_mask = (1 << get_order(size)) - 1; spin_lock_irqsave(&pool->lock, flags); pageno = bitmap_find_next_zero_area(pool->bitmap, pool->nr_pages, - 0, count, (1 << align) - 1); + 0, count, align_mask); if (pageno < pool->nr_pages) { bitmap_set(pool->bitmap, pageno, count); ptr = pool->vaddr + PAGE_SIZE * pageno; @@ -648,12 +648,12 @@ void arm_dma_free(struct device *dev, size_t size, void *cpu_addr, if (arch_is_coherent() || nommu()) { __dma_free_buffer(page, size); + } else if (__free_from_pool(cpu_addr, size)) { + return; } else if (!IS_ENABLED(CONFIG_CMA)) { __dma_free_remap(cpu_addr, size); __dma_free_buffer(page, size); } else { - if (__free_from_pool(cpu_addr, size)) - return; /* * Non-atomic allocations cannot be freed with IRQs disabled */ diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 77458548e031..40ca11ed6e5f 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -231,8 +231,6 @@ void __sync_icache_dcache(pte_t pteval) struct page *page; struct address_space *mapping; - if (!pte_present_user(pteval)) - return; if (cache_is_vipt_nonaliasing() && !pte_exec(pteval)) /* only flush non-aliasing VIPT caches for exec mappings */ return; diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S index c2021139cb56..ea94765acf9a 100644 --- a/arch/arm/mm/tlb-v7.S +++ b/arch/arm/mm/tlb-v7.S @@ -38,10 +38,10 @@ ENTRY(v7wbi_flush_user_tlb_range) dsb mov r0, r0, lsr #PAGE_SHIFT @ align address mov r1, r1, lsr #PAGE_SHIFT -#ifdef CONFIG_ARM_ERRATA_720789 - mov r3, #0 -#else asid r3, r3 @ mask ASID +#ifdef CONFIG_ARM_ERRATA_720789 + ALT_SMP(W(mov) r3, #0 ) + ALT_UP(W(nop) ) #endif orr r0, r3, r0, lsl #PAGE_SHIFT @ Create initial MVA mov r1, r1, lsl #PAGE_SHIFT diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c index c2193178210b..3ed1adbc09f8 100644 --- a/arch/arm/plat-mxc/tzic.c +++ b/arch/arm/plat-mxc/tzic.c @@ -23,6 +23,7 @@ #include <mach/hardware.h> #include <mach/common.h> +#include <mach/irqs.h> #include "irq-common.h" diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index c1793786aea9..d245a87dc014 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -47,6 +47,7 @@ void __init orion_clkdev_init(struct clk *tclk) orion_clkdev_add(NULL, MV643XX_ETH_NAME ".2", tclk); orion_clkdev_add(NULL, MV643XX_ETH_NAME ".3", tclk); orion_clkdev_add(NULL, "orion_wdt", tclk); + orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".0", tclk); } /* Fill in the resources structure and link it into the platform diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c index af95af257301..dfda74fae6f2 100644 --- a/arch/arm/plat-orion/gpio.c +++ b/arch/arm/plat-orion/gpio.c @@ -8,15 +8,22 @@ * warranty of any kind, whether express or implied. */ +#define DEBUG + #include <linux/kernel.h> #include <linux/init.h> #include <linux/irq.h> +#include <linux/irqdomain.h> #include <linux/module.h> #include <linux/spinlock.h> #include <linux/bitops.h> #include <linux/io.h> #include <linux/gpio.h> #include <linux/leds.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_address.h> +#include <plat/gpio.h> /* * GPIO unit register offsets. @@ -38,6 +45,7 @@ struct orion_gpio_chip { unsigned long valid_output; int mask_offset; int secondary_irq_base; + struct irq_domain *domain; }; static void __iomem *GPIO_OUT(struct orion_gpio_chip *ochip) @@ -222,10 +230,10 @@ static int orion_gpio_to_irq(struct gpio_chip *chip, unsigned pin) struct orion_gpio_chip *ochip = container_of(chip, struct orion_gpio_chip, chip); - return ochip->secondary_irq_base + pin; + return irq_create_mapping(ochip->domain, + ochip->secondary_irq_base + pin); } - /* * Orion-specific GPIO API extensions. */ @@ -353,12 +361,10 @@ static int gpio_irq_set_type(struct irq_data *d, u32 type) int pin; u32 u; - pin = d->irq - gc->irq_base; + pin = d->hwirq - ochip->secondary_irq_base; u = readl(GPIO_IO_CONF(ochip)) & (1 << pin); if (!u) { - printk(KERN_ERR "orion gpio_irq_set_type failed " - "(irq %d, pin %d).\n", d->irq, pin); return -EINVAL; } @@ -397,17 +403,53 @@ static int gpio_irq_set_type(struct irq_data *d, u32 type) u &= ~(1 << pin); /* rising */ writel(u, GPIO_IN_POL(ochip)); } - return 0; } -void __init orion_gpio_init(int gpio_base, int ngpio, - u32 base, int mask_offset, int secondary_irq_base) +static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) +{ + struct orion_gpio_chip *ochip = irq_get_handler_data(irq); + u32 cause, type; + int i; + + if (ochip == NULL) + return; + + cause = readl(GPIO_DATA_IN(ochip)) & readl(GPIO_LEVEL_MASK(ochip)); + cause |= readl(GPIO_EDGE_CAUSE(ochip)) & readl(GPIO_EDGE_MASK(ochip)); + + for (i = 0; i < ochip->chip.ngpio; i++) { + int irq; + + irq = ochip->secondary_irq_base + i; + + if (!(cause & (1 << i))) + continue; + + type = irqd_get_trigger_type(irq_get_irq_data(irq)); + if ((type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) { + /* Swap polarity (race with GPIO line) */ + u32 polarity; + + polarity = readl(GPIO_IN_POL(ochip)); + polarity ^= 1 << i; + writel(polarity, GPIO_IN_POL(ochip)); + } + generic_handle_irq(irq); + } +} + +void __init orion_gpio_init(struct device_node *np, + int gpio_base, int ngpio, + void __iomem *base, int mask_offset, + int secondary_irq_base, + int irqs[4]) { struct orion_gpio_chip *ochip; struct irq_chip_generic *gc; struct irq_chip_type *ct; char gc_label[16]; + int i; if (orion_gpio_chip_count == ARRAY_SIZE(orion_gpio_chips)) return; @@ -426,6 +468,10 @@ void __init orion_gpio_init(int gpio_base, int ngpio, ochip->chip.base = gpio_base; ochip->chip.ngpio = ngpio; ochip->chip.can_sleep = 0; +#ifdef CONFIG_OF + ochip->chip.of_node = np; +#endif + spin_lock_init(&ochip->lock); ochip->base = (void __iomem *)base; ochip->valid_input = 0; @@ -435,8 +481,6 @@ void __init orion_gpio_init(int gpio_base, int ngpio, gpiochip_add(&ochip->chip); - orion_gpio_chip_count++; - /* * Mask and clear GPIO interrupts. */ @@ -444,16 +488,28 @@ void __init orion_gpio_init(int gpio_base, int ngpio, writel(0, GPIO_EDGE_MASK(ochip)); writel(0, GPIO_LEVEL_MASK(ochip)); - gc = irq_alloc_generic_chip("orion_gpio_irq", 2, secondary_irq_base, + /* Setup the interrupt handlers. Each chip can have up to 4 + * interrupt handlers, with each handler dealing with 8 GPIO + * pins. */ + + for (i = 0; i < 4; i++) { + if (irqs[i]) { + irq_set_handler_data(irqs[i], ochip); + irq_set_chained_handler(irqs[i], gpio_irq_handler); + } + } + + gc = irq_alloc_generic_chip("orion_gpio_irq", 2, + secondary_irq_base, ochip->base, handle_level_irq); gc->private = ochip; - ct = gc->chip_types; ct->regs.mask = ochip->mask_offset + GPIO_LEVEL_MASK_OFF; ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW; ct->chip.irq_mask = irq_gc_mask_clr_bit; ct->chip.irq_unmask = irq_gc_mask_set_bit; ct->chip.irq_set_type = gpio_irq_set_type; + ct->chip.name = ochip->chip.label; ct++; ct->regs.mask = ochip->mask_offset + GPIO_EDGE_MASK_OFF; @@ -464,41 +520,69 @@ void __init orion_gpio_init(int gpio_base, int ngpio, ct->chip.irq_unmask = irq_gc_mask_set_bit; ct->chip.irq_set_type = gpio_irq_set_type; ct->handler = handle_edge_irq; + ct->chip.name = ochip->chip.label; irq_setup_generic_chip(gc, IRQ_MSK(ngpio), IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE); -} -void orion_gpio_irq_handler(int pinoff) -{ - struct orion_gpio_chip *ochip; - u32 cause, type; - int i; - - ochip = orion_gpio_chip_find(pinoff); - if (ochip == NULL) - return; - - cause = readl(GPIO_DATA_IN(ochip)) & readl(GPIO_LEVEL_MASK(ochip)); - cause |= readl(GPIO_EDGE_CAUSE(ochip)) & readl(GPIO_EDGE_MASK(ochip)); - - for (i = 0; i < ochip->chip.ngpio; i++) { - int irq; + /* Setup irq domain on top of the generic chip. */ + ochip->domain = irq_domain_add_legacy(np, + ochip->chip.ngpio, + ochip->secondary_irq_base, + ochip->secondary_irq_base, + &irq_domain_simple_ops, + ochip); + if (!ochip->domain) + panic("%s: couldn't allocate irq domain (DT).\n", + ochip->chip.label); - irq = ochip->secondary_irq_base + i; + orion_gpio_chip_count++; +} - if (!(cause & (1 << i))) - continue; +#ifdef CONFIG_OF +static void __init orion_gpio_of_init_one(struct device_node *np, + int irq_gpio_base) +{ + int ngpio, gpio_base, mask_offset; + void __iomem *base; + int ret, i; + int irqs[4]; + int secondary_irq_base; + + ret = of_property_read_u32(np, "ngpio", &ngpio); + if (ret) + goto out; + ret = of_property_read_u32(np, "mask-offset", &mask_offset); + if (ret == -EINVAL) + mask_offset = 0; + else + goto out; + base = of_iomap(np, 0); + if (!base) + goto out; + + secondary_irq_base = irq_gpio_base + (32 * orion_gpio_chip_count); + gpio_base = 32 * orion_gpio_chip_count; + + /* Get the interrupt numbers. Each chip can have up to 4 + * interrupt handlers, with each handler dealing with 8 GPIO + * pins. */ + + for (i = 0; i < 4; i++) + irqs[i] = irq_of_parse_and_map(np, i); + + orion_gpio_init(np, gpio_base, ngpio, base, mask_offset, + secondary_irq_base, irqs); + return; +out: + pr_err("%s: %s: missing mandatory property\n", __func__, np->name); +} - type = irqd_get_trigger_type(irq_get_irq_data(irq)); - if ((type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) { - /* Swap polarity (race with GPIO line) */ - u32 polarity; +void __init orion_gpio_of_init(int irq_gpio_base) +{ + struct device_node *np; - polarity = readl(GPIO_IN_POL(ochip)); - polarity ^= 1 << i; - writel(polarity, GPIO_IN_POL(ochip)); - } - generic_handle_irq(irq); - } + for_each_compatible_node(np, NULL, "marvell,orion-gpio") + orion_gpio_of_init_one(np, irq_gpio_base); } +#endif diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h index bec0c98ce41f..81c6fc8a7b28 100644 --- a/arch/arm/plat-orion/include/plat/gpio.h +++ b/arch/arm/plat-orion/include/plat/gpio.h @@ -13,7 +13,7 @@ #include <linux/init.h> #include <linux/types.h> - +#include <linux/irqdomain.h> /* * Orion-specific GPIO API extensions. */ @@ -27,13 +27,11 @@ int orion_gpio_led_blink_set(unsigned gpio, int state, void orion_gpio_set_valid(unsigned pin, int mode); /* Initialize gpiolib. */ -void __init orion_gpio_init(int gpio_base, int ngpio, - u32 base, int mask_offset, int secondary_irq_base); - -/* - * GPIO interrupt handling. - */ -void orion_gpio_irq_handler(int irqoff); - +void __init orion_gpio_init(struct device_node *np, + int gpio_base, int ngpio, + void __iomem *base, int mask_offset, + int secondary_irq_base, + int irq[4]); +void __init orion_gpio_of_init(int irq_gpio_base); #endif diff --git a/arch/arm/plat-orion/include/plat/irq.h b/arch/arm/plat-orion/include/plat/irq.h index f05eeab94968..50547e417936 100644 --- a/arch/arm/plat-orion/include/plat/irq.h +++ b/arch/arm/plat-orion/include/plat/irq.h @@ -12,6 +12,5 @@ #define __PLAT_IRQ_H void orion_irq_init(unsigned int irq_start, void __iomem *maskaddr); - - +void __init orion_dt_init_irq(void); #endif diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c index 2d5b9c1ef389..d751964def4c 100644 --- a/arch/arm/plat-orion/irq.c +++ b/arch/arm/plat-orion/irq.c @@ -11,8 +11,12 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/irq.h> +#include <linux/irqdomain.h> #include <linux/io.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <plat/irq.h> +#include <plat/gpio.h> void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr) { @@ -32,3 +36,39 @@ void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr) irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE); } + +#ifdef CONFIG_OF +static int __init orion_add_irq_domain(struct device_node *np, + struct device_node *interrupt_parent) +{ + int i = 0, irq_gpio; + void __iomem *base; + + do { + base = of_iomap(np, i); + if (base) { + orion_irq_init(i * 32, base); + i++; + } + } while (base); + + irq_domain_add_legacy(np, i * 32, 0, 0, + &irq_domain_simple_ops, NULL); + + irq_gpio = i * 32; + orion_gpio_of_init(irq_gpio); + + return 0; +} + +static const struct of_device_id orion_irq_match[] = { + { .compatible = "marvell,orion-intc", + .data = orion_add_irq_domain, }, + {}, +}; + +void __init orion_dt_init_irq(void) +{ + of_irq_init(orion_irq_match); +} +#endif diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 7aca31c1df1f..9c3b90c3538e 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -403,7 +403,8 @@ config S5P_DEV_USB_EHCI config S3C24XX_PWM bool "PWM device support" - select HAVE_PWM + select PWM + select PWM_SAMSUNG help Support for exporting the PWM timer blocks via the pwm device system diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index fb849d044bde..c834b32af275 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -719,8 +719,10 @@ static int __init vfp_init(void) if ((fmrx(MVFR1) & 0x000fff00) == 0x00011100) elf_hwcap |= HWCAP_NEON; #endif +#ifdef CONFIG_VFPv3 if ((fmrx(MVFR1) & 0xf0000000) == 0x10000000) elf_hwcap |= HWCAP_VFPv4; +#endif } } return 0; |