diff options
Diffstat (limited to 'arch/arm')
98 files changed, 1442 insertions, 882 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index d57b4753585d..cbee1169b883 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -306,9 +306,11 @@ choice config ARCH_MULTIPLATFORM bool "Allow multiple platforms to be selected" depends on MMU + select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_PATCH_PHYS_VIRT select AUTO_ZRELADDR select COMMON_CLK + select GENERIC_CLOCKEVENTS select MULTI_IRQ_HANDLER select SPARSE_IRQ select USE_OF @@ -905,16 +907,18 @@ config ARCH_MULTI_V4_V5 config ARCH_MULTI_V6 bool "ARMv6 based platforms (ARM11)" select ARCH_MULTI_V6_V7 - select CPU_V6 + select CPU_V6K config ARCH_MULTI_V7 bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)" default y select ARCH_MULTI_V6_V7 select CPU_V7 + select HAVE_SMP config ARCH_MULTI_V6_V7 bool + select MIGHT_HAVE_CACHE_L2X0 config ARCH_MULTI_CPU_AUTO def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7) @@ -922,6 +926,13 @@ config ARCH_MULTI_CPU_AUTO endmenu +config ARCH_VIRT + bool "Dummy Virtual Machine" if ARCH_MULTI_V7 + select ARM_AMBA + select ARM_GIC + select ARM_PSCI + select HAVE_ARM_ARCH_TIMER + # # This is sorted alphabetically by mach-* pathname. However, plat-* # Kconfigs may be included either alphabetically (according to the @@ -1047,8 +1058,6 @@ source "arch/arm/mach-versatile/Kconfig" source "arch/arm/mach-vexpress/Kconfig" source "arch/arm/plat-versatile/Kconfig" -source "arch/arm/mach-virt/Kconfig" - source "arch/arm/mach-vt8500/Kconfig" source "arch/arm/mach-w90x900/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 51e5bede657f..dd1bd7ed77be 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -200,7 +200,6 @@ machine-$(CONFIG_ARCH_U300) += u300 machine-$(CONFIG_ARCH_U8500) += ux500 machine-$(CONFIG_ARCH_VERSATILE) += versatile machine-$(CONFIG_ARCH_VEXPRESS) += vexpress -machine-$(CONFIG_ARCH_VIRT) += virt machine-$(CONFIG_ARCH_VT8500) += vt8500 machine-$(CONFIG_ARCH_W90X900) += w90x900 machine-$(CONFIG_ARCH_ZYNQ) += zynq diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 3269029a1ce6..4a89023f55ab 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -206,7 +206,8 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap3-n900.dtb \ omap3-n9.dtb \ omap3-n950.dtb \ - omap3-tobi.dtb \ + omap3-overo-tobi.dtb \ + omap3-overo-storm-tobi.dtb \ omap3-gta04.dtb \ omap3-igep0020.dtb \ omap3-igep0030.dtb \ diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 4718ec4a4dbf..486880b74831 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -121,7 +121,7 @@ ti,model = "AM335x-EVMSK"; ti,audio-codec = <&tlv320aic3106>; ti,mcasp-controller = <&mcasp1>; - ti,codec-clock-rate = <24576000>; + ti,codec-clock-rate = <24000000>; ti,audio-routing = "Headphone Jack", "HPLOUT", "Headphone Jack", "HPROUT"; @@ -256,6 +256,12 @@ >; }; + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + >; + }; + mcasp1_pins: mcasp1_pins { pinctrl-single,pins = < 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ @@ -456,6 +462,9 @@ status = "okay"; vmmc-supply = <&vmmc_reg>; bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; }; &sham { diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 66609684d41b..9480cf891f8c 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -23,6 +23,7 @@ gpio0 = &gpio0; gpio1 = &gpio1; gpio2 = &gpio2; + eth3 = ð3; }; cpus { @@ -291,7 +292,7 @@ interrupts = <91>; }; - ethernet@34000 { + eth3: ethernet@34000 { compatible = "marvell,armada-370-neta"; reg = <0x34000 0x4000>; interrupts = <14>; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 2b76524f4aa7..187fd46b7b5e 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -379,15 +379,6 @@ #clock-cells = <1>; }; - pmu_intc: pmu-interrupt-ctrl@d0050 { - compatible = "marvell,dove-pmu-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0xd0050 0x8>; - interrupts = <33>; - marvell,#interrupts = <7>; - }; - pinctrl: pin-ctrl@d0200 { compatible = "marvell,dove-pinctrl"; reg = <0xd0200 0x10>; @@ -610,8 +601,6 @@ rtc: real-time-clock@d8500 { compatible = "marvell,orion-rtc"; reg = <0xd8500 0x20>; - interrupt-parent = <&pmu_intc>; - interrupts = <5>; }; gpio2: gpio-ctrl@e8400 { diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index fd8fc7cd53f3..5bfae54fb780 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -52,12 +52,6 @@ }; }; - codec: spdif-transmitter { - compatible = "linux,spdif-dit"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_spdif>; - }; - sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; @@ -111,7 +105,7 @@ }; pinctrl_hummingboard_spdif: hummingboard-spdif { - fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0>; + fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; }; pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus { @@ -142,6 +136,8 @@ }; &spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_spdif>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index 64daa3b311f6..c2a24888a276 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -46,12 +46,6 @@ }; }; - codec: spdif-transmitter { - compatible = "linux,spdif-dit"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_cubox_i_spdif>; - }; - sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; @@ -89,7 +83,7 @@ }; pinctrl_cubox_i_spdif: cubox-i-spdif { - fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0>; + fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; }; pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus { @@ -121,6 +115,8 @@ }; &spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_spdif>; status = "okay"; }; diff --git a/arch/arm/boot/dts/omap3-gta04.dts b/arch/arm/boot/dts/omap3-gta04.dts index b9b55c95a566..c551e4af4d83 100644 --- a/arch/arm/boot/dts/omap3-gta04.dts +++ b/arch/arm/boot/dts/omap3-gta04.dts @@ -32,7 +32,7 @@ aux-button { label = "aux"; linux,code = <169>; - gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; gpio-key,wakeup; }; }; @@ -92,6 +92,8 @@ bmp085@77 { compatible = "bosch,bmp085"; reg = <0x77>; + interrupt-parent = <&gpio4>; + interrupts = <17 IRQ_TYPE_EDGE_RISING>; }; /* leds */ @@ -141,8 +143,8 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vmmc1>; - vmmc_aux-supply = <&vsim>; bus-width = <4>; + ti,non-removable; }; &mmc2 { diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts index 39828ce464ee..9938b5dc1909 100644 --- a/arch/arm/boot/dts/omap3-n9.dts +++ b/arch/arm/boot/dts/omap3-n9.dts @@ -14,5 +14,5 @@ / { model = "Nokia N9"; - compatible = "nokia,omap3-n9", "ti,omap3"; + compatible = "nokia,omap3-n9", "ti,omap36xx", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 6fc85f963530..0bf40c90faba 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -1,6 +1,6 @@ /* * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz> - * Copyright 2013 Aaro Koskinen <aaro.koskinen@iki.fi> + * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 (or later) as @@ -13,7 +13,7 @@ / { model = "Nokia N900"; - compatible = "nokia,omap3-n900", "ti,omap3"; + compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts index b076a526b999..261c5589bfa3 100644 --- a/arch/arm/boot/dts/omap3-n950.dts +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -14,5 +14,5 @@ / { model = "Nokia N950"; - compatible = "nokia,omap3-n950", "ti,omap3"; + compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts new file mode 100644 index 000000000000..966b5c9cd96a --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Tobi expansion board is manufactured by Gumstix Inc. + */ + +/dts-v1/; + +#include "omap36xx.dtsi" +#include "omap3-overo-tobi-common.dtsi" + +/ { + model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Tobi"; + compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; +}; + diff --git a/arch/arm/boot/dts/omap3-tobi.dts b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi index 7e4ad2aec37a..4edc013a91c1 100644 --- a/arch/arm/boot/dts/omap3-tobi.dts +++ b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi @@ -13,9 +13,6 @@ #include "omap3-overo.dtsi" / { - model = "TI OMAP3 Gumstix Overo on Tobi"; - compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"; - leds { compatible = "gpio-leds"; heartbeat { diff --git a/arch/arm/boot/dts/omap3-overo-tobi.dts b/arch/arm/boot/dts/omap3-overo-tobi.dts new file mode 100644 index 000000000000..de5653e1b5ca --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo-tobi.dts @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Tobi expansion board is manufactured by Gumstix Inc. + */ + +/dts-v1/; + +#include "omap34xx.dtsi" +#include "omap3-overo-tobi-common.dtsi" + +/ { + model = "OMAP35xx Gumstix Overo on Tobi"; + compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3"; +}; + diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi index a461d2fd1fb0..597099907f8e 100644 --- a/arch/arm/boot/dts/omap3-overo.dtsi +++ b/arch/arm/boot/dts/omap3-overo.dtsi @@ -9,9 +9,6 @@ /* * The Gumstix Overo must be combined with an expansion board. */ -/dts-v1/; - -#include "omap34xx.dtsi" / { pwmleds { diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 389e987ec281..44ec401ec366 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -57,6 +57,8 @@ resets = <&tegra_car 27>; reset-names = "dc"; + nvidia,head = <0>; + rgb { status = "disabled"; }; @@ -72,6 +74,8 @@ resets = <&tegra_car 26>; reset-names = "dc"; + nvidia,head = <1>; + rgb { status = "disabled"; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 480ecda3416b..48d2a7f4d0c0 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -94,6 +94,8 @@ resets = <&tegra_car 27>; reset-names = "dc"; + nvidia,head = <0>; + rgb { status = "disabled"; }; @@ -109,6 +111,8 @@ resets = <&tegra_car 26>; reset-names = "dc"; + nvidia,head = <1>; + rgb { status = "disabled"; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index 9104224124ee..1e156d9d0506 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -28,7 +28,7 @@ compatible = "nvidia,cardhu", "nvidia,tegra30"; aliases { - rtc0 = "/i2c@7000d000/tps6586x@34"; + rtc0 = "/i2c@7000d000/tps65911@2d"; rtc1 = "/rtc@7000e000"; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index ed8e7700b46d..19a84e933f4e 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -170,6 +170,8 @@ resets = <&tegra_car 27>; reset-names = "dc"; + nvidia,head = <0>; + rgb { status = "disabled"; }; @@ -185,6 +187,8 @@ resets = <&tegra_car 26>; reset-names = "dc"; + nvidia,head = <1>; + rgb { status = "disabled"; }; diff --git a/arch/arm/boot/dts/testcases/tests-interrupts.dtsi b/arch/arm/boot/dts/testcases/tests-interrupts.dtsi deleted file mode 100644 index c843720bd3e5..000000000000 --- a/arch/arm/boot/dts/testcases/tests-interrupts.dtsi +++ /dev/null @@ -1,58 +0,0 @@ - -/ { - testcase-data { - interrupts { - #address-cells = <1>; - #size-cells = <1>; - test_intc0: intc0 { - interrupt-controller; - #interrupt-cells = <1>; - }; - - test_intc1: intc1 { - interrupt-controller; - #interrupt-cells = <3>; - }; - - test_intc2: intc2 { - interrupt-controller; - #interrupt-cells = <2>; - }; - - test_intmap0: intmap0 { - #interrupt-cells = <1>; - #address-cells = <0>; - interrupt-map = <1 &test_intc0 9>, - <2 &test_intc1 10 11 12>, - <3 &test_intc2 13 14>, - <4 &test_intc2 15 16>; - }; - - test_intmap1: intmap1 { - #interrupt-cells = <2>; - interrupt-map = <0x5000 1 2 &test_intc0 15>; - }; - - interrupts0 { - interrupt-parent = <&test_intc0>; - interrupts = <1>, <2>, <3>, <4>; - }; - - interrupts1 { - interrupt-parent = <&test_intmap0>; - interrupts = <1>, <2>, <3>, <4>; - }; - - interrupts-extended0 { - reg = <0x5000 0x100>; - interrupts-extended = <&test_intc0 1>, - <&test_intc1 2 3 4>, - <&test_intc2 5 6>, - <&test_intmap0 1>, - <&test_intmap0 2>, - <&test_intmap0 3>, - <&test_intmap1 1 2>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/testcases/tests-phandle.dtsi b/arch/arm/boot/dts/testcases/tests-phandle.dtsi deleted file mode 100644 index 0007d3cd7dc2..000000000000 --- a/arch/arm/boot/dts/testcases/tests-phandle.dtsi +++ /dev/null @@ -1,39 +0,0 @@ - -/ { - testcase-data { - phandle-tests { - provider0: provider0 { - #phandle-cells = <0>; - }; - - provider1: provider1 { - #phandle-cells = <1>; - }; - - provider2: provider2 { - #phandle-cells = <2>; - }; - - provider3: provider3 { - #phandle-cells = <3>; - }; - - consumer-a { - phandle-list = <&provider1 1>, - <&provider2 2 0>, - <0>, - <&provider3 4 4 3>, - <&provider2 5 100>, - <&provider0>, - <&provider1 7>; - phandle-list-names = "first", "second", "third"; - - phandle-list-bad-phandle = <12345678 0 0>; - phandle-list-bad-args = <&provider2 1 0>, - <&provider3 0>; - empty-property; - unterminated-string = [40 41 42 43]; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/testcases/tests.dtsi b/arch/arm/boot/dts/testcases/tests.dtsi deleted file mode 100644 index 3f123ecc9dd7..000000000000 --- a/arch/arm/boot/dts/testcases/tests.dtsi +++ /dev/null @@ -1,2 +0,0 @@ -/include/ "tests-phandle.dtsi" -/include/ "tests-interrupts.dtsi" diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts index f43907c40c93..65f657711323 100644 --- a/arch/arm/boot/dts/versatile-pb.dts +++ b/arch/arm/boot/dts/versatile-pb.dts @@ -1,4 +1,4 @@ -/include/ "versatile-ab.dts" +#include <versatile-ab.dts> / { model = "ARM Versatile PB"; @@ -47,4 +47,4 @@ }; }; -/include/ "testcases/tests.dtsi" +#include <testcases.dtsi> diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index 6309ee52ccfc..f1aeb7d72712 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -154,6 +154,7 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MXC=y CONFIG_MMC=y +CONFIG_MMC_UNSAFE_RESUME=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_ESDHC_IMX=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 53e82c2523eb..09e974392fa1 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -39,6 +39,8 @@ CONFIG_SOC_IMX53=y CONFIG_SOC_IMX6Q=y CONFIG_SOC_IMX6SL=y CONFIG_SOC_VF610=y +CONFIG_PCI=y +CONFIG_PCI_IMX6=y CONFIG_SMP=y CONFIG_VMSPLIT_2G=y CONFIG_PREEMPT_VOLUNTARY=y @@ -165,6 +167,7 @@ CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_ANATOP=y CONFIG_REGULATOR_DA9052=y +CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_MC13783=y CONFIG_REGULATOR_MC13892=y CONFIG_REGULATOR_PFUZE100=y @@ -186,6 +189,7 @@ CONFIG_LCD_L4F00242T03=y CONFIG_LCD_PLATFORM=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_PWM=y +CONFIG_BACKLIGHT_GPIO=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y CONFIG_SOUND=y @@ -211,6 +215,7 @@ CONFIG_USB_GADGET=y CONFIG_USB_ETH=m CONFIG_USB_MASS_STORAGE=m CONFIG_MMC=y +CONFIG_MMC_UNSAFE_RESUME=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_ESDHC_IMX=y @@ -225,6 +230,7 @@ CONFIG_LEDS_TRIGGER_BACKLIGHT=y CONFIG_LEDS_TRIGGER_GPIO=y CONFIG_RTC_CLASS=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y +CONFIG_RTC_DRV_PCF8563=y CONFIG_RTC_DRV_MC13XXX=y CONFIG_RTC_DRV_MXC=y CONFIG_RTC_DRV_SNVS=y @@ -277,6 +283,7 @@ CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=m CONFIG_NLS_UTF8=y +CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y # CONFIG_SCHED_DEBUG is not set CONFIG_PROVE_LOCKING=y diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index e9a49fe0284e..8b8b61685a34 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -212,6 +212,7 @@ extern void copy_to_user_page(struct vm_area_struct *, struct page *, static inline void __flush_icache_all(void) { __flush_icache_preferred(); + dsb(); } /* diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h index 03243f7eeddf..85c60adc8b60 100644 --- a/arch/arm/include/asm/pgtable-3level.h +++ b/arch/arm/include/asm/pgtable-3level.h @@ -120,13 +120,16 @@ /* * 2nd stage PTE definitions for LPAE. */ -#define L_PTE_S2_MT_UNCACHED (_AT(pteval_t, 0x5) << 2) /* MemAttr[3:0] */ -#define L_PTE_S2_MT_WRITETHROUGH (_AT(pteval_t, 0xa) << 2) /* MemAttr[3:0] */ -#define L_PTE_S2_MT_WRITEBACK (_AT(pteval_t, 0xf) << 2) /* MemAttr[3:0] */ -#define L_PTE_S2_RDONLY (_AT(pteval_t, 1) << 6) /* HAP[1] */ -#define L_PTE_S2_RDWR (_AT(pteval_t, 3) << 6) /* HAP[2:1] */ +#define L_PTE_S2_MT_UNCACHED (_AT(pteval_t, 0x0) << 2) /* strongly ordered */ +#define L_PTE_S2_MT_WRITETHROUGH (_AT(pteval_t, 0xa) << 2) /* normal inner write-through */ +#define L_PTE_S2_MT_WRITEBACK (_AT(pteval_t, 0xf) << 2) /* normal inner write-back */ +#define L_PTE_S2_MT_DEV_SHARED (_AT(pteval_t, 0x1) << 2) /* device */ +#define L_PTE_S2_MT_MASK (_AT(pteval_t, 0xf) << 2) -#define L_PMD_S2_RDWR (_AT(pmdval_t, 3) << 6) /* HAP[2:1] */ +#define L_PTE_S2_RDONLY (_AT(pteval_t, 1) << 6) /* HAP[1] */ +#define L_PTE_S2_RDWR (_AT(pteval_t, 3) << 6) /* HAP[2:1] */ + +#define L_PMD_S2_RDWR (_AT(pmdval_t, 3) << 6) /* HAP[2:1] */ /* * Hyp-mode PL2 PTE definitions for LPAE. diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h index ef3c6072aa45..ac4bfae26702 100644 --- a/arch/arm/include/asm/spinlock.h +++ b/arch/arm/include/asm/spinlock.h @@ -37,18 +37,9 @@ static inline void dsb_sev(void) { -#if __LINUX_ARM_ARCH__ >= 7 - __asm__ __volatile__ ( - "dsb ishst\n" - SEV - ); -#else - __asm__ __volatile__ ( - "mcr p15, 0, %0, c7, c10, 4\n" - SEV - : : "r" (0) - ); -#endif + + dsb(ishst); + __asm__(SEV); } /* diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index b0df9761de6d..1e8b030dbefd 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -731,7 +731,7 @@ static void __init request_standard_resources(const struct machine_desc *mdesc) kernel_data.end = virt_to_phys(_end - 1); for_each_memblock(memory, region) { - res = memblock_virt_alloc_low(sizeof(*res), 0); + res = memblock_virt_alloc(sizeof(*res), 0); res->name = "System RAM"; res->start = __pfn_to_phys(memblock_region_memory_base_pfn(region)); res->end = __pfn_to_phys(memblock_region_memory_end_pfn(region)) - 1; diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index b1aa6a9b3bd1..af4f2dfda40c 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -16,12 +16,7 @@ config ARCH_BCM_MOBILE select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP select ARM_GIC - select CPU_V7 - select CLKSRC_OF - select GENERIC_CLOCKEVENTS - select GENERIC_TIME select GPIO_BCM_KONA - select SPARSE_IRQ select TICK_ONESHOT select CACHE_L2X0 select HAVE_ARM_ARCH_TIMER diff --git a/arch/arm/mach-bcm2835/Kconfig b/arch/arm/mach-bcm2835/Kconfig index d1f9612f8c15..3a369350a26f 100644 --- a/arch/arm/mach-bcm2835/Kconfig +++ b/arch/arm/mach-bcm2835/Kconfig @@ -4,10 +4,6 @@ config ARCH_BCM2835 select ARM_AMBA select ARM_ERRATA_411920 select ARM_TIMER_SP804 - select CLKDEV_LOOKUP - select CLKSRC_OF - select CPU_V6 - select GENERIC_CLOCKEVENTS select PINCTRL select PINCTRL_BCM2835 help diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig index 7a02d222c378..b0cb0722acd2 100644 --- a/arch/arm/mach-berlin/Kconfig +++ b/arch/arm/mach-berlin/Kconfig @@ -1,9 +1,7 @@ config ARCH_BERLIN bool "Marvell Berlin SoCs" if ARCH_MULTI_V7 select ARM_GIC - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP - select COMMON_CLK select DW_APB_ICTL select DW_APB_TIMER_OF @@ -16,12 +14,10 @@ config MACH_BERLIN_BG2 select CACHE_L2X0 select CPU_PJ4B select HAVE_ARM_TWD if SMP - select HAVE_SMP config MACH_BERLIN_BG2CD bool "Marvell Armada 1500-mini (BG2CD)" select CACHE_L2X0 - select CPU_V7 select HAVE_ARM_TWD if SMP endmenu diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig index dbf0df8bb0ac..dce8decd5d46 100644 --- a/arch/arm/mach-cns3xxx/Kconfig +++ b/arch/arm/mach-cns3xxx/Kconfig @@ -1,9 +1,6 @@ config ARCH_CNS3XXX bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6 select ARM_GIC - select CPU_V6K - select GENERIC_CLOCKEVENTS - select MIGHT_HAVE_CACHE_L2X0 select MIGHT_HAVE_PCI select PCI_DOMAINS if PCI help diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig index 0aded64a9ebc..830b76e70250 100644 --- a/arch/arm/mach-highbank/Kconfig +++ b/arch/arm/mach-highbank/Kconfig @@ -5,7 +5,6 @@ config ARCH_HIGHBANK select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_HAS_OPP select ARCH_SUPPORTS_BIG_ENDIAN - select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_AMBA select ARM_ERRATA_764369 if SMP select ARM_ERRATA_775420 @@ -14,14 +13,8 @@ config ARCH_HIGHBANK select ARM_PSCI select ARM_TIMER_SP804 select CACHE_L2X0 - select COMMON_CLK - select CPU_V7 - select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU select HAVE_ARM_TWD if SMP - select HAVE_SMP select MAILBOX select PL320_MBOX - select SPARSE_IRQ - select USE_OF select ZONE_DMA if ARM_LPAE diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig index 1abae5f6a418..9d0a87b025e3 100644 --- a/arch/arm/mach-hisi/Kconfig +++ b/arch/arm/mach-hisi/Kconfig @@ -3,13 +3,9 @@ config ARCH_HI3xxx select ARM_AMBA select ARM_GIC select ARM_TIMER_SP804 - select ARCH_WANT_OPTIONAL_GPIOLIB select CACHE_L2X0 - select CLKSRC_OF - select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU select HAVE_ARM_TWD if SMP - select HAVE_SMP select PINCTRL select PINCTRL_SINGLE help diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 33567aa5880f..5740296dc429 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -1,19 +1,15 @@ config ARCH_MXC bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 + select ARCH_HAS_CPUFREQ + select ARCH_HAS_OPP select ARCH_REQUIRE_GPIOLIB select ARM_CPU_SUSPEND if PM - select ARM_PATCH_PHYS_VIRT select CLKSRC_MMIO - select COMMON_CLK - select GENERIC_ALLOCATOR - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP - select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7 - select MULTI_IRQ_HANDLER select PINCTRL + select PM_OPP if PM select SOC_BUS - select SPARSE_IRQ - select USE_OF + select SRAM help Support for Freescale MXC/iMX-based family of processors @@ -121,18 +117,16 @@ config SOC_IMX31 config SOC_IMX35 bool select ARCH_MXC_IOMUX_V3 - select CPU_V6K select HAVE_EPIT select MXC_AVIC + select PINCTRL_IMX35 select SMP_ON_UP if SMP - select PINCTRL config SOC_IMX5 bool select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select ARCH_MXC_IOMUX_V3 - select CPU_V7 select MXC_TZIC config SOC_IMX51 @@ -777,65 +771,50 @@ config SOC_IMX50 config SOC_IMX53 bool "i.MX53 support" select HAVE_IMX_SRC - select IMX_HAVE_PLATFORM_IMX2_WDT select PINCTRL_IMX53 select SOC_IMX5 help This enables support for Freescale i.MX53 processor. -config SOC_IMX6Q - bool "i.MX6 Quad/DualLite support" - select ARCH_HAS_CPUFREQ - select ARCH_HAS_OPP +config SOC_IMX6 + bool select ARM_ERRATA_754322 - select ARM_ERRATA_764369 if SMP select ARM_ERRATA_775420 select ARM_GIC - select CPU_V7 - select HAVE_ARM_SCU if SMP - select HAVE_ARM_TWD if SMP select HAVE_IMX_ANATOP select HAVE_IMX_GPC select HAVE_IMX_MMDC select HAVE_IMX_SRC - select HAVE_SMP select MFD_SYSCON - select MIGHT_HAVE_PCI - select PCI_DOMAINS if PCI - select PINCTRL_IMX6Q select PL310_ERRATA_588369 if CACHE_PL310 select PL310_ERRATA_727915 if CACHE_PL310 select PL310_ERRATA_769419 if CACHE_PL310 - select PM_OPP if PM + +config SOC_IMX6Q + bool "i.MX6 Quad/DualLite support" + select ARM_ERRATA_764369 if SMP + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if SMP + select MIGHT_HAVE_PCI + select PCI_DOMAINS if PCI + select PINCTRL_IMX6Q + select SOC_IMX6 help This enables support for Freescale i.MX6 Quad processor. config SOC_IMX6SL bool "i.MX6 SoloLite support" - select ARM_ERRATA_754322 - select ARM_ERRATA_775420 - select ARM_GIC - select CPU_V7 - select HAVE_IMX_ANATOP - select HAVE_IMX_GPC - select HAVE_IMX_MMDC - select HAVE_IMX_SRC - select MFD_SYSCON select PINCTRL_IMX6SL - select PL310_ERRATA_588369 if CACHE_PL310 - select PL310_ERRATA_727915 if CACHE_PL310 - select PL310_ERRATA_769419 if CACHE_PL310 + select SOC_IMX6 help This enables support for Freescale i.MX6 SoloLite processor. config SOC_VF610 bool "Vybrid Family VF610 support" - select CPU_V7 select ARM_GIC - select CLKSRC_OF select PINCTRL_VF610 select VF_PIT_TIMER select PL310_ERRATA_588369 if CACHE_PL310 diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index befcaf5d0574..f4ed83032dd0 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o ifeq ($(CONFIG_CPU_IDLE),y) obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o +obj-$(CONFIG_SOC_IMX6SL) += cpuidle-imx6sl.o endif ifdef CONFIG_SND_IMX_SOC @@ -101,11 +102,11 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o -ifeq ($(CONFIG_PM),y) -obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o -# i.MX6SL reuses i.MX6Q code -obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o headsmp.o +ifeq ($(CONFIG_SUSPEND),y) +AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a +obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o endif +obj-$(CONFIG_SOC_IMX6) += pm-imx6.o # i.MX5 based machines obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c index d7ed66091a2a..bdc2e4630a08 100644 --- a/arch/arm/mach-imx/clk-imx21.c +++ b/arch/arm/mach-imx/clk-imx21.c @@ -149,7 +149,6 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href) clk_register_clkdev(clk[per1], "per", "imx-gpt.1"); clk_register_clkdev(clk[gpt3_ipg_gate], "ipg", "imx-gpt.2"); clk_register_clkdev(clk[per1], "per", "imx-gpt.2"); - clk_register_clkdev(clk[pwm_ipg_gate], "pwm", "mxc_pwm.0"); clk_register_clkdev(clk[per2], "per", "imx21-cspi.0"); clk_register_clkdev(clk[cspi1_ipg_gate], "ipg", "imx21-cspi.0"); clk_register_clkdev(clk[per2], "per", "imx21-cspi.1"); diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index 69858c78f40d..dc36e6c2f1da 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -265,14 +265,6 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0"); clk_register_clkdev(clk[cspi2_ipg], NULL, "imx35-cspi.1"); clk_register_clkdev(clk[cspi3_ipg], NULL, "imx35-cspi.2"); - clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.0"); - clk_register_clkdev(clk[per10], "per", "mxc_pwm.0"); - clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.1"); - clk_register_clkdev(clk[per10], "per", "mxc_pwm.1"); - clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.2"); - clk_register_clkdev(clk[per10], "per", "mxc_pwm.2"); - clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.3"); - clk_register_clkdev(clk[per10], "per", "mxc_pwm.3"); clk_register_clkdev(clk[kpp_ipg], NULL, "imx-keypad"); clk_register_clkdev(clk[tsc_ipg], NULL, "mx25-adc"); clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.0"); diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index c6b40f386786..d2da8908b268 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -231,7 +231,6 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.4"); clk_register_clkdev(clk[gpt6_ipg_gate], "ipg", "imx-gpt.5"); clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.5"); - clk_register_clkdev(clk[pwm_ipg_gate], NULL, "mxc_pwm.0"); clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.0"); clk_register_clkdev(clk[sdhc1_ipg_gate], "ipg", "imx21-mmc.0"); clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.1"); diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index 19fca1fdc6fe..568ef0a4de84 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -266,8 +266,6 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_register_clkdev(clk[IMX5_CLK_ECSPI2_PER_GATE], "per", "imx51-ecspi.1"); clk_register_clkdev(clk[IMX5_CLK_ECSPI2_IPG_GATE], "ipg", "imx51-ecspi.1"); clk_register_clkdev(clk[IMX5_CLK_CSPI_IPG_GATE], NULL, "imx35-cspi.2"); - clk_register_clkdev(clk[IMX5_CLK_PWM1_IPG_GATE], "pwm", "mxc_pwm.0"); - clk_register_clkdev(clk[IMX5_CLK_PWM2_IPG_GATE], "pwm", "mxc_pwm.1"); clk_register_clkdev(clk[IMX5_CLK_I2C1_GATE], NULL, "imx21-i2c.0"); clk_register_clkdev(clk[IMX5_CLK_I2C2_GATE], NULL, "imx21-i2c.1"); clk_register_clkdev(clk[IMX5_CLK_USBOH3_PER_GATE], "per", "mxc-ehci.0"); diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 4d677f442539..b0e7f9d2c245 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -437,12 +437,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0"); clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0"); - clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL); - clk_register_clkdev(clk[ahb], "ahb", NULL); - clk_register_clkdev(clk[cko1], "cko1", NULL); - clk_register_clkdev(clk[arm], NULL, "cpu0"); - clk_register_clkdev(clk[pll4_post_div], "pll4_post_div", NULL); - clk_register_clkdev(clk[pll4_audio], "pll4_audio", NULL); + clk_register_clkdev(clk[enet_ref], "enet_ref", NULL); if ((imx_get_soc_revision() != IMX_CHIP_REVISION_1_0) || cpu_is_imx6dl()) { diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c index 4c86f3035205..f7073c0782fb 100644 --- a/arch/arm/mach-imx/clk-imx6sl.c +++ b/arch/arm/mach-imx/clk-imx6sl.c @@ -1,5 +1,5 @@ /* - * Copyright 2013 Freescale Semiconductor, Inc. + * Copyright 2013-2014 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -18,27 +18,43 @@ #include "clk.h" #include "common.h" -static const char const *step_sels[] = { "osc", "pll2_pfd2", }; -static const char const *pll1_sw_sels[] = { "pll1_sys", "step", }; -static const char const *ocram_alt_sels[] = { "pll2_pfd2", "pll3_pfd1", }; -static const char const *ocram_sels[] = { "periph", "ocram_alt_sels", }; -static const char const *pre_periph_sels[] = { "pll2_bus", "pll2_pfd2", "pll2_pfd0", "pll2_198m", }; -static const char const *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", }; -static const char const *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", }; -static const char const *periph_sels[] = { "pre_periph_sel", "periph_clk2_podf", }; -static const char const *periph2_sels[] = { "pre_periph2_sel", "periph2_clk2_podf", }; -static const char const *csi_lcdif_sels[] = { "mmdc", "pll2_pfd2", "pll3_120m", "pll3_pfd1", }; -static const char const *usdhc_sels[] = { "pll2_pfd2", "pll2_pfd0", }; -static const char const *ssi_sels[] = { "pll3_pfd2", "pll3_pfd3", "pll4_audio_div", "dummy", }; -static const char const *perclk_sels[] = { "ipg", "osc", }; -static const char const *epdc_pxp_sels[] = { "mmdc", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd1", }; -static const char const *gpu2d_ovg_sels[] = { "pll3_pfd1", "pll3_usb_otg", "pll2_bus", "pll2_pfd2", }; -static const char const *gpu2d_sels[] = { "pll2_pfd2", "pll3_usb_otg", "pll3_pfd1", "pll2_bus", }; -static const char const *lcdif_pix_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll3_pfd0", "pll3_pfd1", }; -static const char const *epdc_pix_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd1", "pll3_pfd1", }; -static const char const *audio_sels[] = { "pll4_audio_div", "pll3_pfd2", "pll3_pfd3", "pll3_usb_otg", }; -static const char const *ecspi_sels[] = { "pll3_60m", "osc", }; -static const char const *uart_sels[] = { "pll3_80m", "osc", }; +#define CCSR 0xc +#define BM_CCSR_PLL1_SW_CLK_SEL (1 << 2) +#define CACRR 0x10 +#define CDHIPR 0x48 +#define BM_CDHIPR_ARM_PODF_BUSY (1 << 16) +#define ARM_WAIT_DIV_396M 2 +#define ARM_WAIT_DIV_792M 4 +#define ARM_WAIT_DIV_996M 6 + +#define PLL_ARM 0x0 +#define BM_PLL_ARM_DIV_SELECT (0x7f << 0) +#define BM_PLL_ARM_POWERDOWN (1 << 12) +#define BM_PLL_ARM_ENABLE (1 << 13) +#define BM_PLL_ARM_LOCK (1 << 31) +#define PLL_ARM_DIV_792M 66 + +static const char *step_sels[] = { "osc", "pll2_pfd2", }; +static const char *pll1_sw_sels[] = { "pll1_sys", "step", }; +static const char *ocram_alt_sels[] = { "pll2_pfd2", "pll3_pfd1", }; +static const char *ocram_sels[] = { "periph", "ocram_alt_sels", }; +static const char *pre_periph_sels[] = { "pll2_bus", "pll2_pfd2", "pll2_pfd0", "pll2_198m", }; +static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", }; +static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", }; +static const char *periph_sels[] = { "pre_periph_sel", "periph_clk2_podf", }; +static const char *periph2_sels[] = { "pre_periph2_sel", "periph2_clk2_podf", }; +static const char *csi_lcdif_sels[] = { "mmdc", "pll2_pfd2", "pll3_120m", "pll3_pfd1", }; +static const char *usdhc_sels[] = { "pll2_pfd2", "pll2_pfd0", }; +static const char *ssi_sels[] = { "pll3_pfd2", "pll3_pfd3", "pll4_audio_div", "dummy", }; +static const char *perclk_sels[] = { "ipg", "osc", }; +static const char *epdc_pxp_sels[] = { "mmdc", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd1", }; +static const char *gpu2d_ovg_sels[] = { "pll3_pfd1", "pll3_usb_otg", "pll2_bus", "pll2_pfd2", }; +static const char *gpu2d_sels[] = { "pll2_pfd2", "pll3_usb_otg", "pll3_pfd1", "pll2_bus", }; +static const char *lcdif_pix_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll3_pfd0", "pll3_pfd1", }; +static const char *epdc_pix_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd1", "pll3_pfd1", }; +static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2", "pll3_pfd3", "pll3_usb_otg", }; +static const char *ecspi_sels[] = { "pll3_60m", "osc", }; +static const char *uart_sels[] = { "pll3_80m", "osc", }; static struct clk_div_table clk_enet_ref_table[] = { { .val = 0, .div = 20, }, @@ -65,6 +81,89 @@ static struct clk_div_table video_div_table[] = { static struct clk *clks[IMX6SL_CLK_END]; static struct clk_onecell_data clk_data; +static void __iomem *ccm_base; +static void __iomem *anatop_base; + +static const u32 clks_init_on[] __initconst = { + IMX6SL_CLK_IPG, IMX6SL_CLK_ARM, IMX6SL_CLK_MMDC_ROOT, +}; + +/* + * ERR005311 CCM: After exit from WAIT mode, unwanted interrupt(s) taken + * during WAIT mode entry process could cause cache memory + * corruption. + * + * Software workaround: + * To prevent this issue from occurring, software should ensure that the + * ARM to IPG clock ratio is less than 12:5 (that is < 2.4x), before + * entering WAIT mode. + * + * This function will set the ARM clk to max value within the 12:5 limit. + * As IPG clock is fixed at 66MHz(so ARM freq must not exceed 158.4MHz), + * ARM freq are one of below setpoints: 396MHz, 792MHz and 996MHz, since + * the clk APIs can NOT be called in idle thread(may cause kernel schedule + * as there is sleep function in PLL wait function), so here we just slow + * down ARM to below freq according to previous freq: + * + * run mode wait mode + * 396MHz -> 132MHz; + * 792MHz -> 158.4MHz; + * 996MHz -> 142.3MHz; + */ +static int imx6sl_get_arm_divider_for_wait(void) +{ + if (readl_relaxed(ccm_base + CCSR) & BM_CCSR_PLL1_SW_CLK_SEL) { + return ARM_WAIT_DIV_396M; + } else { + if ((readl_relaxed(anatop_base + PLL_ARM) & + BM_PLL_ARM_DIV_SELECT) == PLL_ARM_DIV_792M) + return ARM_WAIT_DIV_792M; + else + return ARM_WAIT_DIV_996M; + } +} + +static void imx6sl_enable_pll_arm(bool enable) +{ + static u32 saved_pll_arm; + u32 val; + + if (enable) { + saved_pll_arm = val = readl_relaxed(anatop_base + PLL_ARM); + val |= BM_PLL_ARM_ENABLE; + val &= ~BM_PLL_ARM_POWERDOWN; + writel_relaxed(val, anatop_base + PLL_ARM); + while (!(__raw_readl(anatop_base + PLL_ARM) & BM_PLL_ARM_LOCK)) + ; + } else { + writel_relaxed(saved_pll_arm, anatop_base + PLL_ARM); + } +} + +void imx6sl_set_wait_clk(bool enter) +{ + static unsigned long saved_arm_div; + int arm_div_for_wait = imx6sl_get_arm_divider_for_wait(); + + /* + * According to hardware design, arm podf change need + * PLL1 clock enabled. + */ + if (arm_div_for_wait == ARM_WAIT_DIV_396M) + imx6sl_enable_pll_arm(true); + + if (enter) { + saved_arm_div = readl_relaxed(ccm_base + CACRR); + writel_relaxed(arm_div_for_wait, ccm_base + CACRR); + } else { + writel_relaxed(saved_arm_div, ccm_base + CACRR); + } + while (__raw_readl(ccm_base + CDHIPR) & BM_CDHIPR_ARM_PODF_BUSY) + ; + + if (arm_div_for_wait == ARM_WAIT_DIV_396M) + imx6sl_enable_pll_arm(false); +} static void __init imx6sl_clocks_init(struct device_node *ccm_node) { @@ -72,6 +171,7 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) void __iomem *base; int irq; int i; + int ret; clks[IMX6SL_CLK_DUMMY] = imx_clk_fixed("dummy", 0); clks[IMX6SL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0); @@ -80,6 +180,7 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-anatop"); base = of_iomap(np, 0); WARN_ON(!base); + anatop_base = base; /* type name parent base div_mask */ clks[IMX6SL_CLK_PLL1_SYS] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f); @@ -127,6 +228,7 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) np = ccm_node; base = of_iomap(np, 0); WARN_ON(!base); + ccm_base = base; /* Reuse imx6q pm code */ imx6q_pm_set_ccm_base(base); @@ -258,6 +360,19 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) clk_register_clkdev(clks[IMX6SL_CLK_GPT], "ipg", "imx-gpt.0"); clk_register_clkdev(clks[IMX6SL_CLK_GPT_SERIAL], "per", "imx-gpt.0"); + /* Ensure the AHB clk is at 132MHz. */ + ret = clk_set_rate(clks[IMX6SL_CLK_AHB], 132000000); + if (ret) + pr_warn("%s: failed to set AHB clock rate %d!\n", + __func__, ret); + + /* + * Make sure those always on clocks are enabled to maintain the correct + * usecount and enabling/disabling of parent PLLs. + */ + for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) + clk_prepare_enable(clks[clks_init_on[i]]); + if (IS_ENABLED(CONFIG_USB_MXS_PHY)) { clk_prepare_enable(clks[IMX6SL_CLK_USBPHY1_GATE]); clk_prepare_enable(clks[IMX6SL_CLK_USBPHY2_GATE]); diff --git a/arch/arm/mach-imx/clk-vf610.c b/arch/arm/mach-imx/clk-vf610.c index ecd66d8e20b6..22dc3ee21fd4 100644 --- a/arch/arm/mach-imx/clk-vf610.c +++ b/arch/arm/mach-imx/clk-vf610.c @@ -63,25 +63,25 @@ static void __iomem *anatop_base; static void __iomem *ccm_base; /* sources for multiplexer clocks, this is used multiple times */ -static const char const *fast_sels[] = { "firc", "fxosc", }; -static const char const *slow_sels[] = { "sirc_32k", "sxosc", }; -static const char const *pll1_sels[] = { "pll1_main", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", }; -static const char const *pll2_sels[] = { "pll2_main", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", }; -static const char const *sys_sels[] = { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_main", "pll1_pfd_sel", "pll3_main", }; -static const char const *ddr_sels[] = { "pll2_pfd2", "sys_sel", }; -static const char const *rmii_sels[] = { "enet_ext", "audio_ext", "enet_50m", "enet_25m", }; -static const char const *enet_ts_sels[] = { "enet_ext", "fxosc", "audio_ext", "usb", "enet_ts", "enet_25m", "enet_50m", }; -static const char const *esai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", }; -static const char const *sai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", }; -static const char const *nfc_sels[] = { "platform_bus", "pll1_pfd1", "pll3_pfd1", "pll3_pfd3", }; -static const char const *qspi_sels[] = { "pll3_main", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", }; -static const char const *esdhc_sels[] = { "pll3_main", "pll3_pfd3", "pll1_pfd3", "platform_bus", }; -static const char const *dcu_sels[] = { "pll1_pfd2", "pll3_main", }; -static const char const *gpu_sels[] = { "pll2_pfd2", "pll3_pfd2", }; -static const char const *vadc_sels[] = { "pll6_main_div", "pll3_main_div", "pll3_main", }; +static const char *fast_sels[] = { "firc", "fxosc", }; +static const char *slow_sels[] = { "sirc_32k", "sxosc", }; +static const char *pll1_sels[] = { "pll1_main", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", }; +static const char *pll2_sels[] = { "pll2_main", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", }; +static const char *sys_sels[] = { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_main", "pll1_pfd_sel", "pll3_main", }; +static const char *ddr_sels[] = { "pll2_pfd2", "sys_sel", }; +static const char *rmii_sels[] = { "enet_ext", "audio_ext", "enet_50m", "enet_25m", }; +static const char *enet_ts_sels[] = { "enet_ext", "fxosc", "audio_ext", "usb", "enet_ts", "enet_25m", "enet_50m", }; +static const char *esai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", }; +static const char *sai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", }; +static const char *nfc_sels[] = { "platform_bus", "pll1_pfd1", "pll3_pfd1", "pll3_pfd3", }; +static const char *qspi_sels[] = { "pll3_main", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", }; +static const char *esdhc_sels[] = { "pll3_main", "pll3_pfd3", "pll1_pfd3", "platform_bus", }; +static const char *dcu_sels[] = { "pll1_pfd2", "pll3_main", }; +static const char *gpu_sels[] = { "pll2_pfd2", "pll3_pfd2", }; +static const char *vadc_sels[] = { "pll6_main_div", "pll3_main_div", "pll3_main", }; /* FTM counter clock source, not module clock */ -static const char const *ftm_ext_sels[] = {"sirc_128k", "sxosc", "fxosc_half", "audio_ext", }; -static const char const *ftm_fix_sels[] = { "sxosc", "ipg_bus", }; +static const char *ftm_ext_sels[] = {"sirc_128k", "sxosc", "fxosc_half", "audio_ext", }; +static const char *ftm_fix_sels[] = { "sxosc", "ipg_bus", }; static struct clk_div_table pll4_main_div_table[] = { { .val = 0, .div = 1 }, diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 59c3b9b26bb4..b5241ea76706 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -1,5 +1,5 @@ /* - * Copyright 2004-2013 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2004-2014 Freescale Semiconductor, Inc. All Rights Reserved. */ /* @@ -116,7 +116,6 @@ void imx_enable_cpu(int cpu, bool enable); void imx_set_cpu_jump(int cpu, void *jump_addr); u32 imx_get_cpu_arg(int cpu); void imx_set_cpu_arg(int cpu, u32 arg); -void v7_cpu_resume(void); #ifdef CONFIG_SMP void v7_secondary_startup(void); void imx_scu_map_io(void); @@ -139,18 +138,28 @@ void imx_anatop_init(void); void imx_anatop_pre_suspend(void); void imx_anatop_post_resume(void); int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode); -void imx6q_set_chicken_bit(void); +void imx6q_set_int_mem_clk_lpm(void); +void imx6sl_set_wait_clk(bool enter); void imx_cpu_die(unsigned int cpu); int imx_cpu_kill(unsigned int cpu); -#ifdef CONFIG_PM +#ifdef CONFIG_SUSPEND +void v7_cpu_resume(void); +void imx6_suspend(void __iomem *ocram_vbase); +#else +static inline void v7_cpu_resume(void) {} +static inline void imx6_suspend(void __iomem *ocram_vbase) {} +#endif + void imx6q_pm_init(void); +void imx6dl_pm_init(void); +void imx6sl_pm_init(void); void imx6q_pm_set_ccm_base(void __iomem *base); + +#ifdef CONFIG_PM void imx5_pm_init(void); #else -static inline void imx6q_pm_init(void) {} -static inline void imx6q_pm_set_ccm_base(void __iomem *base) {} static inline void imx5_pm_init(void) {} #endif diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c index 23ddfb693b2d..6bcae0479049 100644 --- a/arch/arm/mach-imx/cpuidle-imx6q.c +++ b/arch/arm/mach-imx/cpuidle-imx6q.c @@ -68,8 +68,8 @@ int __init imx6q_cpuidle_init(void) /* Need to enable SCU standby for entering WAIT modes */ imx_scu_standby_enable(); - /* Set chicken bit to get a reliable WAIT mode support */ - imx6q_set_chicken_bit(); + /* Set INT_MEM_CLK_LPM bit to get a reliable WAIT mode support */ + imx6q_set_int_mem_clk_lpm(); return cpuidle_register(&imx6q_cpuidle_driver, NULL); } diff --git a/arch/arm/mach-imx/cpuidle-imx6sl.c b/arch/arm/mach-imx/cpuidle-imx6sl.c new file mode 100644 index 000000000000..d4b6b8171fa9 --- /dev/null +++ b/arch/arm/mach-imx/cpuidle-imx6sl.c @@ -0,0 +1,57 @@ +/* + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/cpuidle.h> +#include <linux/module.h> +#include <asm/cpuidle.h> +#include <asm/proc-fns.h> + +#include "common.h" +#include "cpuidle.h" + +static int imx6sl_enter_wait(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + imx6q_set_lpm(WAIT_UNCLOCKED); + /* + * Software workaround for ERR005311, see function + * description for details. + */ + imx6sl_set_wait_clk(true); + cpu_do_idle(); + imx6sl_set_wait_clk(false); + imx6q_set_lpm(WAIT_CLOCKED); + + return index; +} + +static struct cpuidle_driver imx6sl_cpuidle_driver = { + .name = "imx6sl_cpuidle", + .owner = THIS_MODULE, + .states = { + /* WFI */ + ARM_CPUIDLE_WFI_STATE, + /* WAIT */ + { + .exit_latency = 50, + .target_residency = 75, + .flags = CPUIDLE_FLAG_TIME_VALID | + CPUIDLE_FLAG_TIMER_STOP, + .enter = imx6sl_enter_wait, + .name = "WAIT", + .desc = "Clock off", + }, + }, + .state_count = 2, + .safe_state_index = 0, +}; + +int __init imx6sl_cpuidle_init(void) +{ + return cpuidle_register(&imx6sl_cpuidle_driver, NULL); +} diff --git a/arch/arm/mach-imx/cpuidle.h b/arch/arm/mach-imx/cpuidle.h index 786f98ecc145..24e33670417c 100644 --- a/arch/arm/mach-imx/cpuidle.h +++ b/arch/arm/mach-imx/cpuidle.h @@ -13,6 +13,7 @@ #ifdef CONFIG_CPU_IDLE extern int imx5_cpuidle_init(void); extern int imx6q_cpuidle_init(void); +extern int imx6sl_cpuidle_init(void); #else static inline int imx5_cpuidle_init(void) { @@ -22,4 +23,8 @@ static inline int imx6q_cpuidle_init(void) { return 0; } +static inline int imx6sl_cpuidle_init(void) +{ + return 0; +} #endif diff --git a/arch/arm/mach-imx/devices-imx25.h b/arch/arm/mach-imx/devices-imx25.h index 769563fdeaa0..61a114cddc39 100644 --- a/arch/arm/mach-imx/devices-imx25.h +++ b/arch/arm/mach-imx/devices-imx25.h @@ -83,7 +83,3 @@ extern const struct imx_spi_imx_data imx25_cspi_data[]; #define imx25_add_spi_imx0(pdata) imx25_add_spi_imx(0, pdata) #define imx25_add_spi_imx1(pdata) imx25_add_spi_imx(1, pdata) #define imx25_add_spi_imx2(pdata) imx25_add_spi_imx(2, pdata) - -extern struct imx_mxc_pwm_data imx25_mxc_pwm_data[]; -#define imx25_add_mxc_pwm(id) \ - imx_add_mxc_pwm(&imx25_mxc_pwm_data[id]) diff --git a/arch/arm/mach-imx/devices-imx51.h b/arch/arm/mach-imx/devices-imx51.h index deee5baee88c..26389f35a2b2 100644 --- a/arch/arm/mach-imx/devices-imx51.h +++ b/arch/arm/mach-imx/devices-imx51.h @@ -57,10 +57,6 @@ extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[]; #define imx51_add_imx2_wdt(id) \ imx_add_imx2_wdt(&imx51_imx2_wdt_data[id]) -extern const struct imx_mxc_pwm_data imx51_mxc_pwm_data[]; -#define imx51_add_mxc_pwm(id) \ - imx_add_mxc_pwm(&imx51_mxc_pwm_data[id]) - extern const struct imx_imx_keypad_data imx51_imx_keypad_data; #define imx51_add_imx_keypad(pdata) \ imx_add_imx_keypad(&imx51_imx_keypad_data, pdata) diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig index 68c74fb0373c..2d260a5a307c 100644 --- a/arch/arm/mach-imx/devices/Kconfig +++ b/arch/arm/mach-imx/devices/Kconfig @@ -67,9 +67,6 @@ config IMX_HAVE_PLATFORM_MXC_MMC config IMX_HAVE_PLATFORM_MXC_NAND bool -config IMX_HAVE_PLATFORM_MXC_PWM - bool - config IMX_HAVE_PLATFORM_MXC_RNGA bool select ARCH_HAS_RNGA diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile index 67416fb1dc69..1cbc14cd80d1 100644 --- a/arch/arm/mach-imx/devices/Makefile +++ b/arch/arm/mach-imx/devices/Makefile @@ -23,7 +23,6 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_PWM) += platform-mxc_pwm.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RNGA) += platform-mxc_rnga.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h index c13b76b9f6b3..61352a80bb59 100644 --- a/arch/arm/mach-imx/devices/devices-common.h +++ b/arch/arm/mach-imx/devices/devices-common.h @@ -290,15 +290,6 @@ struct imx_pata_imx_data { struct platform_device *__init imx_add_pata_imx( const struct imx_pata_imx_data *data); -struct imx_mxc_pwm_data { - int id; - resource_size_t iobase; - resource_size_t iosize; - resource_size_t irq; -}; -struct platform_device *__init imx_add_mxc_pwm( - const struct imx_mxc_pwm_data *data); - /* mxc_rtc */ struct imx_mxc_rtc_data { const char *devid; diff --git a/arch/arm/mach-imx/devices/platform-mxc_pwm.c b/arch/arm/mach-imx/devices/platform-mxc_pwm.c deleted file mode 100644 index dcd289777687..000000000000 --- a/arch/arm/mach-imx/devices/platform-mxc_pwm.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * Copyright (C) 2009-2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include "../hardware.h" -#include "devices-common.h" - -#define imx_mxc_pwm_data_entry_single(soc, _id, _hwid, _size) \ - { \ - .id = _id, \ - .iobase = soc ## _PWM ## _hwid ## _BASE_ADDR, \ - .iosize = _size, \ - .irq = soc ## _INT_PWM ## _hwid, \ - } -#define imx_mxc_pwm_data_entry(soc, _id, _hwid, _size) \ - [_id] = imx_mxc_pwm_data_entry_single(soc, _id, _hwid, _size) - -#ifdef CONFIG_SOC_IMX21 -const struct imx_mxc_pwm_data imx21_mxc_pwm_data __initconst = - imx_mxc_pwm_data_entry_single(MX21, 0, , SZ_4K); -#endif /* ifdef CONFIG_SOC_IMX21 */ - -#ifdef CONFIG_SOC_IMX25 -const struct imx_mxc_pwm_data imx25_mxc_pwm_data[] __initconst = { -#define imx25_mxc_pwm_data_entry(_id, _hwid) \ - imx_mxc_pwm_data_entry(MX25, _id, _hwid, SZ_16K) - imx25_mxc_pwm_data_entry(0, 1), - imx25_mxc_pwm_data_entry(1, 2), - imx25_mxc_pwm_data_entry(2, 3), - imx25_mxc_pwm_data_entry(3, 4), -}; -#endif /* ifdef CONFIG_SOC_IMX25 */ - -#ifdef CONFIG_SOC_IMX27 -const struct imx_mxc_pwm_data imx27_mxc_pwm_data __initconst = - imx_mxc_pwm_data_entry_single(MX27, 0, , SZ_4K); -#endif /* ifdef CONFIG_SOC_IMX27 */ - -#ifdef CONFIG_SOC_IMX51 -const struct imx_mxc_pwm_data imx51_mxc_pwm_data[] __initconst = { -#define imx51_mxc_pwm_data_entry(_id, _hwid) \ - imx_mxc_pwm_data_entry(MX51, _id, _hwid, SZ_16K) - imx51_mxc_pwm_data_entry(0, 1), - imx51_mxc_pwm_data_entry(1, 2), -}; -#endif /* ifdef CONFIG_SOC_IMX51 */ - -struct platform_device *__init imx_add_mxc_pwm( - const struct imx_mxc_pwm_data *data) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + data->iosize - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - - return imx_add_platform_device("mxc_pwm", data->id, - res, ARRAY_SIZE(res), NULL, 0); -} diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h index a3b0b04b45c9..abf43bb47eca 100644 --- a/arch/arm/mach-imx/hardware.h +++ b/arch/arm/mach-imx/hardware.h @@ -1,5 +1,5 @@ /* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2004-2007, 2014 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright 2008 Juergen Beisert, kernel@pengutronix.de * * This program is free software; you can redistribute it and/or @@ -20,7 +20,9 @@ #ifndef __ASM_ARCH_MXC_HARDWARE_H__ #define __ASM_ARCH_MXC_HARDWARE_H__ +#ifndef __ASSEMBLY__ #include <asm/io.h> +#endif #include <asm/sizes.h> #define addr_in_module(addr, mod) \ diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S index 627f16f0e9d1..de5047c8a6c8 100644 --- a/arch/arm/mach-imx/headsmp.S +++ b/arch/arm/mach-imx/headsmp.S @@ -12,12 +12,7 @@ #include <linux/linkage.h> #include <linux/init.h> -#include <asm/asm-offsets.h> -#include <asm/hardware/cache-l2x0.h> - .section ".text.head", "ax" - -#ifdef CONFIG_SMP diag_reg_offset: .word g_diag_reg - . @@ -34,38 +29,3 @@ ENTRY(v7_secondary_startup) set_diag_reg b secondary_startup ENDPROC(v7_secondary_startup) -#endif - -#ifdef CONFIG_ARM_CPU_SUSPEND -/* - * The following code must assume it is running from physical address - * where absolute virtual addresses to the data section have to be - * turned into relative ones. - */ - -#ifdef CONFIG_CACHE_L2X0 - .macro pl310_resume - adr r0, l2x0_saved_regs_offset - ldr r2, [r0] - add r2, r2, r0 - ldr r0, [r2, #L2X0_R_PHY_BASE] @ get physical base of l2x0 - ldr r1, [r2, #L2X0_R_AUX_CTRL] @ get aux_ctrl value - str r1, [r0, #L2X0_AUX_CTRL] @ restore aux_ctrl - mov r1, #0x1 - str r1, [r0, #L2X0_CTRL] @ re-enable L2 - .endm - -l2x0_saved_regs_offset: - .word l2x0_saved_regs - . - -#else - .macro pl310_resume - .endm -#endif - -ENTRY(v7_cpu_resume) - bl v7_invalidate_l1 - pl310_resume - b cpu_resume -ENDPROC(v7_cpu_resume) -#endif diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 76e5db4fce35..e60456d85c9d 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -182,16 +182,83 @@ static void __init imx6q_enet_phy_init(void) static void __init imx6q_1588_init(void) { + struct device_node *np; + struct clk *ptp_clk; + struct clk *enet_ref; struct regmap *gpr; + u32 clksel; + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-fec"); + if (!np) { + pr_warn("%s: failed to find fec node\n", __func__); + return; + } + + ptp_clk = of_clk_get(np, 2); + if (IS_ERR(ptp_clk)) { + pr_warn("%s: failed to get ptp clock\n", __func__); + goto put_node; + } + + enet_ref = clk_get_sys(NULL, "enet_ref"); + if (IS_ERR(enet_ref)) { + pr_warn("%s: failed to get enet clock\n", __func__); + goto put_ptp_clk; + } + + /* + * If enet_ref from ANATOP/CCM is the PTP clock source, we need to + * set bit IOMUXC_GPR1[21]. Or the PTP clock must be from pad + * (external OSC), and we need to clear the bit. + */ + clksel = ptp_clk == enet_ref ? IMX6Q_GPR1_ENET_CLK_SEL_ANATOP : + IMX6Q_GPR1_ENET_CLK_SEL_PAD; gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); if (!IS_ERR(gpr)) regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_ENET_CLK_SEL_MASK, - IMX6Q_GPR1_ENET_CLK_SEL_ANATOP); + clksel); else pr_err("failed to find fsl,imx6q-iomux-gpr regmap\n"); + clk_put(enet_ref); +put_ptp_clk: + clk_put(ptp_clk); +put_node: + of_node_put(np); +} + +static void __init imx6q_axi_init(void) +{ + struct regmap *gpr; + unsigned int mask; + + gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); + if (!IS_ERR(gpr)) { + /* + * Enable the cacheable attribute of VPU and IPU + * AXI transactions. + */ + mask = IMX6Q_GPR4_VPU_WR_CACHE_SEL | + IMX6Q_GPR4_VPU_RD_CACHE_SEL | + IMX6Q_GPR4_VPU_P_WR_CACHE_VAL | + IMX6Q_GPR4_VPU_P_RD_CACHE_VAL_MASK | + IMX6Q_GPR4_IPU_WR_CACHE_CTL | + IMX6Q_GPR4_IPU_RD_CACHE_CTL; + regmap_update_bits(gpr, IOMUXC_GPR4, mask, mask); + + /* Increase IPU read QoS priority */ + regmap_update_bits(gpr, IOMUXC_GPR6, + IMX6Q_GPR6_IPU1_ID00_RD_QOS_MASK | + IMX6Q_GPR6_IPU1_ID01_RD_QOS_MASK, + (0xf << 16) | (0x7 << 20)); + regmap_update_bits(gpr, IOMUXC_GPR7, + IMX6Q_GPR7_IPU2_ID00_RD_QOS_MASK | + IMX6Q_GPR7_IPU2_ID01_RD_QOS_MASK, + (0xf << 16) | (0x7 << 20)); + } else { + pr_warn("failed to find fsl,imx6q-iomuxc-gpr regmap\n"); + } } static void __init imx6q_init_machine(void) @@ -212,15 +279,18 @@ static void __init imx6q_init_machine(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); imx_anatop_init(); - imx6q_pm_init(); + cpu_is_imx6q() ? imx6q_pm_init() : imx6dl_pm_init(); imx6q_1588_init(); + imx6q_axi_init(); } #define OCOTP_CFG3 0x440 #define OCOTP_CFG3_SPEED_SHIFT 16 #define OCOTP_CFG3_SPEED_1P2GHZ 0x3 +#define OCOTP_CFG3_SPEED_996MHZ 0x2 +#define OCOTP_CFG3_SPEED_852MHZ 0x1 -static void __init imx6q_opp_check_1p2ghz(struct device *cpu_dev) +static void __init imx6q_opp_check_speed_grading(struct device *cpu_dev) { struct device_node *np; void __iomem *base; @@ -238,11 +308,29 @@ static void __init imx6q_opp_check_1p2ghz(struct device *cpu_dev) goto put_node; } + /* + * SPEED_GRADING[1:0] defines the max speed of ARM: + * 2b'11: 1200000000Hz; + * 2b'10: 996000000Hz; + * 2b'01: 852000000Hz; -- i.MX6Q Only, exclusive with 996MHz. + * 2b'00: 792000000Hz; + * We need to set the max speed of ARM according to fuse map. + */ val = readl_relaxed(base + OCOTP_CFG3); val >>= OCOTP_CFG3_SPEED_SHIFT; - if ((val & 0x3) != OCOTP_CFG3_SPEED_1P2GHZ) + val &= 0x3; + + if (val != OCOTP_CFG3_SPEED_1P2GHZ) if (dev_pm_opp_disable(cpu_dev, 1200000000)) pr_warn("failed to disable 1.2 GHz OPP\n"); + if (val < OCOTP_CFG3_SPEED_996MHZ) + if (dev_pm_opp_disable(cpu_dev, 996000000)) + pr_warn("failed to disable 996 MHz OPP\n"); + if (cpu_is_imx6q()) { + if (val != OCOTP_CFG3_SPEED_852MHZ) + if (dev_pm_opp_disable(cpu_dev, 852000000)) + pr_warn("failed to disable 852 MHz OPP\n"); + } put_node: of_node_put(np); @@ -268,7 +356,7 @@ static void __init imx6q_opp_init(void) goto put_node; } - imx6q_opp_check_1p2ghz(cpu_dev); + imx6q_opp_check_speed_grading(cpu_dev); put_node: of_node_put(np); diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c index 0f4fd4c0ab8e..ad323385115c 100644 --- a/arch/arm/mach-imx/mach-imx6sl.c +++ b/arch/arm/mach-imx/mach-imx6sl.c @@ -17,6 +17,7 @@ #include <asm/mach/map.h> #include "common.h" +#include "cpuidle.h" static void __init imx6sl_fec_init(void) { @@ -39,6 +40,8 @@ static void __init imx6sl_init_late(void) /* imx6sl reuses imx6q cpufreq driver */ if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0); + + imx6sl_cpuidle_init(); } static void __init imx6sl_init_machine(void) @@ -55,8 +58,7 @@ static void __init imx6sl_init_machine(void) imx6sl_fec_init(); imx_anatop_init(); - /* Reuse imx6q pm code */ - imx6q_pm_init(); + imx6sl_pm_init(); } static void __init imx6sl_init_irq(void) diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c new file mode 100644 index 000000000000..16f0d249f6a7 --- /dev/null +++ b/arch/arm/mach-imx/pm-imx6.c @@ -0,0 +1,552 @@ +/* + * Copyright 2011-2014 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/genalloc.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/regmap.h> +#include <linux/suspend.h> +#include <asm/cacheflush.h> +#include <asm/fncpy.h> +#include <asm/proc-fns.h> +#include <asm/suspend.h> +#include <asm/tlb.h> + +#include "common.h" +#include "hardware.h" + +#define CCR 0x0 +#define BM_CCR_WB_COUNT (0x7 << 16) +#define BM_CCR_RBC_BYPASS_COUNT (0x3f << 21) +#define BM_CCR_RBC_EN (0x1 << 27) + +#define CLPCR 0x54 +#define BP_CLPCR_LPM 0 +#define BM_CLPCR_LPM (0x3 << 0) +#define BM_CLPCR_BYPASS_PMIC_READY (0x1 << 2) +#define BM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5) +#define BM_CLPCR_SBYOS (0x1 << 6) +#define BM_CLPCR_DIS_REF_OSC (0x1 << 7) +#define BM_CLPCR_VSTBY (0x1 << 8) +#define BP_CLPCR_STBY_COUNT 9 +#define BM_CLPCR_STBY_COUNT (0x3 << 9) +#define BM_CLPCR_COSC_PWRDOWN (0x1 << 11) +#define BM_CLPCR_WB_PER_AT_LPM (0x1 << 16) +#define BM_CLPCR_WB_CORE_AT_LPM (0x1 << 17) +#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS (0x1 << 19) +#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS (0x1 << 21) +#define BM_CLPCR_MASK_CORE0_WFI (0x1 << 22) +#define BM_CLPCR_MASK_CORE1_WFI (0x1 << 23) +#define BM_CLPCR_MASK_CORE2_WFI (0x1 << 24) +#define BM_CLPCR_MASK_CORE3_WFI (0x1 << 25) +#define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26) +#define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27) + +#define CGPR 0x64 +#define BM_CGPR_INT_MEM_CLK_LPM (0x1 << 17) + +#define MX6Q_SUSPEND_OCRAM_SIZE 0x1000 +#define MX6_MAX_MMDC_IO_NUM 33 + +static void __iomem *ccm_base; +static void __iomem *suspend_ocram_base; +static void (*imx6_suspend_in_ocram_fn)(void __iomem *ocram_vbase); + +/* + * suspend ocram space layout: + * ======================== high address ====================== + * . + * . + * . + * ^ + * ^ + * ^ + * imx6_suspend code + * PM_INFO structure(imx6_cpu_pm_info) + * ======================== low address ======================= + */ + +struct imx6_pm_base { + phys_addr_t pbase; + void __iomem *vbase; +}; + +struct imx6_pm_socdata { + u32 cpu_type; + const char *mmdc_compat; + const char *src_compat; + const char *iomuxc_compat; + const char *gpc_compat; + const u32 mmdc_io_num; + const u32 *mmdc_io_offset; +}; + +static const u32 imx6q_mmdc_io_offset[] __initconst = { + 0x5ac, 0x5b4, 0x528, 0x520, /* DQM0 ~ DQM3 */ + 0x514, 0x510, 0x5bc, 0x5c4, /* DQM4 ~ DQM7 */ + 0x56c, 0x578, 0x588, 0x594, /* CAS, RAS, SDCLK_0, SDCLK_1 */ + 0x5a8, 0x5b0, 0x524, 0x51c, /* SDQS0 ~ SDQS3 */ + 0x518, 0x50c, 0x5b8, 0x5c0, /* SDQS4 ~ SDQS7 */ + 0x784, 0x788, 0x794, 0x79c, /* GPR_B0DS ~ GPR_B3DS */ + 0x7a0, 0x7a4, 0x7a8, 0x748, /* GPR_B4DS ~ GPR_B7DS */ + 0x59c, 0x5a0, 0x750, 0x774, /* SODT0, SODT1, MODE_CTL, MODE */ + 0x74c, /* GPR_ADDS */ +}; + +static const u32 imx6dl_mmdc_io_offset[] __initconst = { + 0x470, 0x474, 0x478, 0x47c, /* DQM0 ~ DQM3 */ + 0x480, 0x484, 0x488, 0x48c, /* DQM4 ~ DQM7 */ + 0x464, 0x490, 0x4ac, 0x4b0, /* CAS, RAS, SDCLK_0, SDCLK_1 */ + 0x4bc, 0x4c0, 0x4c4, 0x4c8, /* DRAM_SDQS0 ~ DRAM_SDQS3 */ + 0x4cc, 0x4d0, 0x4d4, 0x4d8, /* DRAM_SDQS4 ~ DRAM_SDQS7 */ + 0x764, 0x770, 0x778, 0x77c, /* GPR_B0DS ~ GPR_B3DS */ + 0x780, 0x784, 0x78c, 0x748, /* GPR_B4DS ~ GPR_B7DS */ + 0x4b4, 0x4b8, 0x750, 0x760, /* SODT0, SODT1, MODE_CTL, MODE */ + 0x74c, /* GPR_ADDS */ +}; + +static const u32 imx6sl_mmdc_io_offset[] __initconst = { + 0x30c, 0x310, 0x314, 0x318, /* DQM0 ~ DQM3 */ + 0x5c4, 0x5cc, 0x5d4, 0x5d8, /* GPR_B0DS ~ GPR_B3DS */ + 0x300, 0x31c, 0x338, 0x5ac, /* CAS, RAS, SDCLK_0, GPR_ADDS */ + 0x33c, 0x340, 0x5b0, 0x5c0, /* SODT0, SODT1, MODE_CTL, MODE */ + 0x330, 0x334, 0x320, /* SDCKE0, SDCKE1, RESET */ +}; + +static const struct imx6_pm_socdata imx6q_pm_data __initconst = { + .cpu_type = MXC_CPU_IMX6Q, + .mmdc_compat = "fsl,imx6q-mmdc", + .src_compat = "fsl,imx6q-src", + .iomuxc_compat = "fsl,imx6q-iomuxc", + .gpc_compat = "fsl,imx6q-gpc", + .mmdc_io_num = ARRAY_SIZE(imx6q_mmdc_io_offset), + .mmdc_io_offset = imx6q_mmdc_io_offset, +}; + +static const struct imx6_pm_socdata imx6dl_pm_data __initconst = { + .cpu_type = MXC_CPU_IMX6DL, + .mmdc_compat = "fsl,imx6q-mmdc", + .src_compat = "fsl,imx6q-src", + .iomuxc_compat = "fsl,imx6dl-iomuxc", + .gpc_compat = "fsl,imx6q-gpc", + .mmdc_io_num = ARRAY_SIZE(imx6dl_mmdc_io_offset), + .mmdc_io_offset = imx6dl_mmdc_io_offset, +}; + +static const struct imx6_pm_socdata imx6sl_pm_data __initconst = { + .cpu_type = MXC_CPU_IMX6SL, + .mmdc_compat = "fsl,imx6sl-mmdc", + .src_compat = "fsl,imx6sl-src", + .iomuxc_compat = "fsl,imx6sl-iomuxc", + .gpc_compat = "fsl,imx6sl-gpc", + .mmdc_io_num = ARRAY_SIZE(imx6sl_mmdc_io_offset), + .mmdc_io_offset = imx6sl_mmdc_io_offset, +}; + +/* + * This structure is for passing necessary data for low level ocram + * suspend code(arch/arm/mach-imx/suspend-imx6.S), if this struct + * definition is changed, the offset definition in + * arch/arm/mach-imx/suspend-imx6.S must be also changed accordingly, + * otherwise, the suspend to ocram function will be broken! + */ +struct imx6_cpu_pm_info { + phys_addr_t pbase; /* The physical address of pm_info. */ + phys_addr_t resume_addr; /* The physical resume address for asm code */ + u32 cpu_type; + u32 pm_info_size; /* Size of pm_info. */ + struct imx6_pm_base mmdc_base; + struct imx6_pm_base src_base; + struct imx6_pm_base iomuxc_base; + struct imx6_pm_base ccm_base; + struct imx6_pm_base gpc_base; + struct imx6_pm_base l2_base; + u32 mmdc_io_num; /* Number of MMDC IOs which need saved/restored. */ + u32 mmdc_io_val[MX6_MAX_MMDC_IO_NUM][2]; /* To save offset and value */ +} __aligned(8); + +void imx6q_set_int_mem_clk_lpm(void) +{ + u32 val = readl_relaxed(ccm_base + CGPR); + + val |= BM_CGPR_INT_MEM_CLK_LPM; + writel_relaxed(val, ccm_base + CGPR); +} + +static void imx6q_enable_rbc(bool enable) +{ + u32 val; + + /* + * need to mask all interrupts in GPC before + * operating RBC configurations + */ + imx_gpc_mask_all(); + + /* configure RBC enable bit */ + val = readl_relaxed(ccm_base + CCR); + val &= ~BM_CCR_RBC_EN; + val |= enable ? BM_CCR_RBC_EN : 0; + writel_relaxed(val, ccm_base + CCR); + + /* configure RBC count */ + val = readl_relaxed(ccm_base + CCR); + val &= ~BM_CCR_RBC_BYPASS_COUNT; + val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0; + writel(val, ccm_base + CCR); + + /* + * need to delay at least 2 cycles of CKIL(32K) + * due to hardware design requirement, which is + * ~61us, here we use 65us for safe + */ + udelay(65); + + /* restore GPC interrupt mask settings */ + imx_gpc_restore_all(); +} + +static void imx6q_enable_wb(bool enable) +{ + u32 val; + + /* configure well bias enable bit */ + val = readl_relaxed(ccm_base + CLPCR); + val &= ~BM_CLPCR_WB_PER_AT_LPM; + val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0; + writel_relaxed(val, ccm_base + CLPCR); + + /* configure well bias count */ + val = readl_relaxed(ccm_base + CCR); + val &= ~BM_CCR_WB_COUNT; + val |= enable ? BM_CCR_WB_COUNT : 0; + writel_relaxed(val, ccm_base + CCR); +} + +int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) +{ + struct irq_desc *iomuxc_irq_desc; + u32 val = readl_relaxed(ccm_base + CLPCR); + + val &= ~BM_CLPCR_LPM; + switch (mode) { + case WAIT_CLOCKED: + break; + case WAIT_UNCLOCKED: + val |= 0x1 << BP_CLPCR_LPM; + val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM; + break; + case STOP_POWER_ON: + val |= 0x2 << BP_CLPCR_LPM; + break; + case WAIT_UNCLOCKED_POWER_OFF: + val |= 0x1 << BP_CLPCR_LPM; + val &= ~BM_CLPCR_VSTBY; + val &= ~BM_CLPCR_SBYOS; + break; + case STOP_POWER_OFF: + val |= 0x2 << BP_CLPCR_LPM; + val |= 0x3 << BP_CLPCR_STBY_COUNT; + val |= BM_CLPCR_VSTBY; + val |= BM_CLPCR_SBYOS; + if (cpu_is_imx6sl()) { + val |= BM_CLPCR_BYPASS_PMIC_READY; + val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS; + } else { + val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS; + } + break; + default: + return -EINVAL; + } + + /* + * ERR007265: CCM: When improper low-power sequence is used, + * the SoC enters low power mode before the ARM core executes WFI. + * + * Software workaround: + * 1) Software should trigger IRQ #32 (IOMUX) to be always pending + * by setting IOMUX_GPR1_GINT. + * 2) Software should then unmask IRQ #32 in GPC before setting CCM + * Low-Power mode. + * 3) Software should mask IRQ #32 right after CCM Low-Power mode + * is set (set bits 0-1 of CCM_CLPCR). + */ + iomuxc_irq_desc = irq_to_desc(32); + imx_gpc_irq_unmask(&iomuxc_irq_desc->irq_data); + writel_relaxed(val, ccm_base + CLPCR); + imx_gpc_irq_mask(&iomuxc_irq_desc->irq_data); + + return 0; +} + +static int imx6q_suspend_finish(unsigned long val) +{ + if (!imx6_suspend_in_ocram_fn) { + cpu_do_idle(); + } else { + /* + * call low level suspend function in ocram, + * as we need to float DDR IO. + */ + local_flush_tlb_all(); + imx6_suspend_in_ocram_fn(suspend_ocram_base); + } + + return 0; +} + +static int imx6q_pm_enter(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_MEM: + imx6q_set_lpm(STOP_POWER_OFF); + imx6q_enable_wb(true); + /* + * For suspend into ocram, asm code already take care of + * RBC setting, so we do NOT need to do that here. + */ + if (!imx6_suspend_in_ocram_fn) + imx6q_enable_rbc(true); + imx_gpc_pre_suspend(); + imx_anatop_pre_suspend(); + imx_set_cpu_jump(0, v7_cpu_resume); + /* Zzz ... */ + cpu_suspend(0, imx6q_suspend_finish); + if (cpu_is_imx6q() || cpu_is_imx6dl()) + imx_smp_prepare(); + imx_anatop_post_resume(); + imx_gpc_post_resume(); + imx6q_enable_rbc(false); + imx6q_enable_wb(false); + imx6q_set_lpm(WAIT_CLOCKED); + break; + default: + return -EINVAL; + } + + return 0; +} + +static const struct platform_suspend_ops imx6q_pm_ops = { + .enter = imx6q_pm_enter, + .valid = suspend_valid_only_mem, +}; + +void __init imx6q_pm_set_ccm_base(void __iomem *base) +{ + ccm_base = base; +} + +static int __init imx6_pm_get_base(struct imx6_pm_base *base, + const char *compat) +{ + struct device_node *node; + struct resource res; + int ret = 0; + + node = of_find_compatible_node(NULL, NULL, compat); + if (!node) { + ret = -ENODEV; + goto out; + } + + ret = of_address_to_resource(node, 0, &res); + if (ret) + goto put_node; + + base->pbase = res.start; + base->vbase = ioremap(res.start, resource_size(&res)); + if (!base->vbase) + ret = -ENOMEM; + +put_node: + of_node_put(node); +out: + return ret; +} + +static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata) +{ + phys_addr_t ocram_pbase; + struct device_node *node; + struct platform_device *pdev; + struct imx6_cpu_pm_info *pm_info; + struct gen_pool *ocram_pool; + unsigned long ocram_base; + int i, ret = 0; + const u32 *mmdc_offset_array; + + suspend_set_ops(&imx6q_pm_ops); + + if (!socdata) { + pr_warn("%s: invalid argument!\n", __func__); + return -EINVAL; + } + + node = of_find_compatible_node(NULL, NULL, "mmio-sram"); + if (!node) { + pr_warn("%s: failed to find ocram node!\n", __func__); + return -ENODEV; + } + + pdev = of_find_device_by_node(node); + if (!pdev) { + pr_warn("%s: failed to find ocram device!\n", __func__); + ret = -ENODEV; + goto put_node; + } + + ocram_pool = dev_get_gen_pool(&pdev->dev); + if (!ocram_pool) { + pr_warn("%s: ocram pool unavailable!\n", __func__); + ret = -ENODEV; + goto put_node; + } + + ocram_base = gen_pool_alloc(ocram_pool, MX6Q_SUSPEND_OCRAM_SIZE); + if (!ocram_base) { + pr_warn("%s: unable to alloc ocram!\n", __func__); + ret = -ENOMEM; + goto put_node; + } + + ocram_pbase = gen_pool_virt_to_phys(ocram_pool, ocram_base); + + suspend_ocram_base = __arm_ioremap_exec(ocram_pbase, + MX6Q_SUSPEND_OCRAM_SIZE, false); + + pm_info = suspend_ocram_base; + pm_info->pbase = ocram_pbase; + pm_info->resume_addr = virt_to_phys(v7_cpu_resume); + pm_info->pm_info_size = sizeof(*pm_info); + + /* + * ccm physical address is not used by asm code currently, + * so get ccm virtual address directly, as we already have + * it from ccm driver. + */ + pm_info->ccm_base.vbase = ccm_base; + + ret = imx6_pm_get_base(&pm_info->mmdc_base, socdata->mmdc_compat); + if (ret) { + pr_warn("%s: failed to get mmdc base %d!\n", __func__, ret); + goto put_node; + } + + ret = imx6_pm_get_base(&pm_info->src_base, socdata->src_compat); + if (ret) { + pr_warn("%s: failed to get src base %d!\n", __func__, ret); + goto src_map_failed; + } + + ret = imx6_pm_get_base(&pm_info->iomuxc_base, socdata->iomuxc_compat); + if (ret) { + pr_warn("%s: failed to get iomuxc base %d!\n", __func__, ret); + goto iomuxc_map_failed; + } + + ret = imx6_pm_get_base(&pm_info->gpc_base, socdata->gpc_compat); + if (ret) { + pr_warn("%s: failed to get gpc base %d!\n", __func__, ret); + goto gpc_map_failed; + } + + ret = imx6_pm_get_base(&pm_info->l2_base, "arm,pl310-cache"); + if (ret) { + pr_warn("%s: failed to get pl310-cache base %d!\n", + __func__, ret); + goto pl310_cache_map_failed; + } + + pm_info->cpu_type = socdata->cpu_type; + pm_info->mmdc_io_num = socdata->mmdc_io_num; + mmdc_offset_array = socdata->mmdc_io_offset; + + for (i = 0; i < pm_info->mmdc_io_num; i++) { + pm_info->mmdc_io_val[i][0] = + mmdc_offset_array[i]; + pm_info->mmdc_io_val[i][1] = + readl_relaxed(pm_info->iomuxc_base.vbase + + mmdc_offset_array[i]); + } + + imx6_suspend_in_ocram_fn = fncpy( + suspend_ocram_base + sizeof(*pm_info), + &imx6_suspend, + MX6Q_SUSPEND_OCRAM_SIZE - sizeof(*pm_info)); + + goto put_node; + +pl310_cache_map_failed: + iounmap(&pm_info->gpc_base.vbase); +gpc_map_failed: + iounmap(&pm_info->iomuxc_base.vbase); +iomuxc_map_failed: + iounmap(&pm_info->src_base.vbase); +src_map_failed: + iounmap(&pm_info->mmdc_base.vbase); +put_node: + of_node_put(node); + + return ret; +} + +static void __init imx6_pm_common_init(const struct imx6_pm_socdata + *socdata) +{ + struct regmap *gpr; + int ret; + + WARN_ON(!ccm_base); + + if (IS_ENABLED(CONFIG_SUSPEND)) { + ret = imx6q_suspend_init(socdata); + if (ret) + pr_warn("%s: No DDR LPM support with suspend %d!\n", + __func__, ret); + } + + /* + * This is for SW workaround step #1 of ERR007265, see comments + * in imx6q_set_lpm for details of this errata. + * Force IOMUXC irq pending, so that the interrupt to GPC can be + * used to deassert dsm_request signal when the signal gets + * asserted unexpectedly. + */ + gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); + if (!IS_ERR(gpr)) + regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT, + IMX6Q_GPR1_GINT); +} + +void __init imx6q_pm_init(void) +{ + imx6_pm_common_init(&imx6q_pm_data); +} + +void __init imx6dl_pm_init(void) +{ + imx6_pm_common_init(&imx6dl_pm_data); +} + +void __init imx6sl_pm_init(void) +{ + imx6_pm_common_init(&imx6sl_pm_data); +} diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c deleted file mode 100644 index 7a9b98589db7..000000000000 --- a/arch/arm/mach-imx/pm-imx6q.c +++ /dev/null @@ -1,241 +0,0 @@ -/* - * Copyright 2011-2013 Freescale Semiconductor, Inc. - * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/mfd/syscon.h> -#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/regmap.h> -#include <linux/suspend.h> -#include <asm/cacheflush.h> -#include <asm/proc-fns.h> -#include <asm/suspend.h> -#include <asm/hardware/cache-l2x0.h> - -#include "common.h" -#include "hardware.h" - -#define CCR 0x0 -#define BM_CCR_WB_COUNT (0x7 << 16) -#define BM_CCR_RBC_BYPASS_COUNT (0x3f << 21) -#define BM_CCR_RBC_EN (0x1 << 27) - -#define CLPCR 0x54 -#define BP_CLPCR_LPM 0 -#define BM_CLPCR_LPM (0x3 << 0) -#define BM_CLPCR_BYPASS_PMIC_READY (0x1 << 2) -#define BM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5) -#define BM_CLPCR_SBYOS (0x1 << 6) -#define BM_CLPCR_DIS_REF_OSC (0x1 << 7) -#define BM_CLPCR_VSTBY (0x1 << 8) -#define BP_CLPCR_STBY_COUNT 9 -#define BM_CLPCR_STBY_COUNT (0x3 << 9) -#define BM_CLPCR_COSC_PWRDOWN (0x1 << 11) -#define BM_CLPCR_WB_PER_AT_LPM (0x1 << 16) -#define BM_CLPCR_WB_CORE_AT_LPM (0x1 << 17) -#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS (0x1 << 19) -#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS (0x1 << 21) -#define BM_CLPCR_MASK_CORE0_WFI (0x1 << 22) -#define BM_CLPCR_MASK_CORE1_WFI (0x1 << 23) -#define BM_CLPCR_MASK_CORE2_WFI (0x1 << 24) -#define BM_CLPCR_MASK_CORE3_WFI (0x1 << 25) -#define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26) -#define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27) - -#define CGPR 0x64 -#define BM_CGPR_CHICKEN_BIT (0x1 << 17) - -static void __iomem *ccm_base; - -void imx6q_set_chicken_bit(void) -{ - u32 val = readl_relaxed(ccm_base + CGPR); - - val |= BM_CGPR_CHICKEN_BIT; - writel_relaxed(val, ccm_base + CGPR); -} - -static void imx6q_enable_rbc(bool enable) -{ - u32 val; - - /* - * need to mask all interrupts in GPC before - * operating RBC configurations - */ - imx_gpc_mask_all(); - - /* configure RBC enable bit */ - val = readl_relaxed(ccm_base + CCR); - val &= ~BM_CCR_RBC_EN; - val |= enable ? BM_CCR_RBC_EN : 0; - writel_relaxed(val, ccm_base + CCR); - - /* configure RBC count */ - val = readl_relaxed(ccm_base + CCR); - val &= ~BM_CCR_RBC_BYPASS_COUNT; - val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0; - writel(val, ccm_base + CCR); - - /* - * need to delay at least 2 cycles of CKIL(32K) - * due to hardware design requirement, which is - * ~61us, here we use 65us for safe - */ - udelay(65); - - /* restore GPC interrupt mask settings */ - imx_gpc_restore_all(); -} - -static void imx6q_enable_wb(bool enable) -{ - u32 val; - - /* configure well bias enable bit */ - val = readl_relaxed(ccm_base + CLPCR); - val &= ~BM_CLPCR_WB_PER_AT_LPM; - val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0; - writel_relaxed(val, ccm_base + CLPCR); - - /* configure well bias count */ - val = readl_relaxed(ccm_base + CCR); - val &= ~BM_CCR_WB_COUNT; - val |= enable ? BM_CCR_WB_COUNT : 0; - writel_relaxed(val, ccm_base + CCR); -} - -int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) -{ - struct irq_desc *iomuxc_irq_desc; - u32 val = readl_relaxed(ccm_base + CLPCR); - - val &= ~BM_CLPCR_LPM; - switch (mode) { - case WAIT_CLOCKED: - break; - case WAIT_UNCLOCKED: - val |= 0x1 << BP_CLPCR_LPM; - val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM; - break; - case STOP_POWER_ON: - val |= 0x2 << BP_CLPCR_LPM; - break; - case WAIT_UNCLOCKED_POWER_OFF: - val |= 0x1 << BP_CLPCR_LPM; - val &= ~BM_CLPCR_VSTBY; - val &= ~BM_CLPCR_SBYOS; - break; - case STOP_POWER_OFF: - val |= 0x2 << BP_CLPCR_LPM; - val |= 0x3 << BP_CLPCR_STBY_COUNT; - val |= BM_CLPCR_VSTBY; - val |= BM_CLPCR_SBYOS; - if (cpu_is_imx6sl()) { - val |= BM_CLPCR_BYPASS_PMIC_READY; - val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS; - } else { - val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS; - } - break; - default: - return -EINVAL; - } - - /* - * ERR007265: CCM: When improper low-power sequence is used, - * the SoC enters low power mode before the ARM core executes WFI. - * - * Software workaround: - * 1) Software should trigger IRQ #32 (IOMUX) to be always pending - * by setting IOMUX_GPR1_GINT. - * 2) Software should then unmask IRQ #32 in GPC before setting CCM - * Low-Power mode. - * 3) Software should mask IRQ #32 right after CCM Low-Power mode - * is set (set bits 0-1 of CCM_CLPCR). - */ - iomuxc_irq_desc = irq_to_desc(32); - imx_gpc_irq_unmask(&iomuxc_irq_desc->irq_data); - writel_relaxed(val, ccm_base + CLPCR); - imx_gpc_irq_mask(&iomuxc_irq_desc->irq_data); - - return 0; -} - -static int imx6q_suspend_finish(unsigned long val) -{ - cpu_do_idle(); - return 0; -} - -static int imx6q_pm_enter(suspend_state_t state) -{ - switch (state) { - case PM_SUSPEND_MEM: - imx6q_set_lpm(STOP_POWER_OFF); - imx6q_enable_wb(true); - imx6q_enable_rbc(true); - imx_gpc_pre_suspend(); - imx_anatop_pre_suspend(); - imx_set_cpu_jump(0, v7_cpu_resume); - /* Zzz ... */ - cpu_suspend(0, imx6q_suspend_finish); - if (cpu_is_imx6q() || cpu_is_imx6dl()) - imx_smp_prepare(); - imx_anatop_post_resume(); - imx_gpc_post_resume(); - imx6q_enable_rbc(false); - imx6q_enable_wb(false); - imx6q_set_lpm(WAIT_CLOCKED); - break; - default: - return -EINVAL; - } - - return 0; -} - -static const struct platform_suspend_ops imx6q_pm_ops = { - .enter = imx6q_pm_enter, - .valid = suspend_valid_only_mem, -}; - -void __init imx6q_pm_set_ccm_base(void __iomem *base) -{ - ccm_base = base; -} - -void __init imx6q_pm_init(void) -{ - struct regmap *gpr; - - WARN_ON(!ccm_base); - - /* - * This is for SW workaround step #1 of ERR007265, see comments - * in imx6q_set_lpm for details of this errata. - * Force IOMUXC irq pending, so that the interrupt to GPC can be - * used to deassert dsm_request signal when the signal gets - * asserted unexpectedly. - */ - gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); - if (!IS_ERR(gpr)) - regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT, - IMX6Q_GPR1_GINT); - - - suspend_set_ops(&imx6q_pm_ops); -} diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S new file mode 100644 index 000000000000..20048ff05739 --- /dev/null +++ b/arch/arm/mach-imx/suspend-imx6.S @@ -0,0 +1,361 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/linkage.h> +#include <asm/asm-offsets.h> +#include <asm/hardware/cache-l2x0.h> +#include "hardware.h" + +/* + * ==================== low level suspend ==================== + * + * Better to follow below rules to use ARM registers: + * r0: pm_info structure address; + * r1 ~ r4: for saving pm_info members; + * r5 ~ r10: free registers; + * r11: io base address. + * + * suspend ocram space layout: + * ======================== high address ====================== + * . + * . + * . + * ^ + * ^ + * ^ + * imx6_suspend code + * PM_INFO structure(imx6_cpu_pm_info) + * ======================== low address ======================= + */ + +/* + * Below offsets are based on struct imx6_cpu_pm_info + * which defined in arch/arm/mach-imx/pm-imx6q.c, this + * structure contains necessary pm info for low level + * suspend related code. + */ +#define PM_INFO_PBASE_OFFSET 0x0 +#define PM_INFO_RESUME_ADDR_OFFSET 0x4 +#define PM_INFO_CPU_TYPE_OFFSET 0x8 +#define PM_INFO_PM_INFO_SIZE_OFFSET 0xC +#define PM_INFO_MX6Q_MMDC_P_OFFSET 0x10 +#define PM_INFO_MX6Q_MMDC_V_OFFSET 0x14 +#define PM_INFO_MX6Q_SRC_P_OFFSET 0x18 +#define PM_INFO_MX6Q_SRC_V_OFFSET 0x1C +#define PM_INFO_MX6Q_IOMUXC_P_OFFSET 0x20 +#define PM_INFO_MX6Q_IOMUXC_V_OFFSET 0x24 +#define PM_INFO_MX6Q_CCM_P_OFFSET 0x28 +#define PM_INFO_MX6Q_CCM_V_OFFSET 0x2C +#define PM_INFO_MX6Q_GPC_P_OFFSET 0x30 +#define PM_INFO_MX6Q_GPC_V_OFFSET 0x34 +#define PM_INFO_MX6Q_L2_P_OFFSET 0x38 +#define PM_INFO_MX6Q_L2_V_OFFSET 0x3C +#define PM_INFO_MMDC_IO_NUM_OFFSET 0x40 +#define PM_INFO_MMDC_IO_VAL_OFFSET 0x44 + +#define MX6Q_SRC_GPR1 0x20 +#define MX6Q_SRC_GPR2 0x24 +#define MX6Q_MMDC_MAPSR 0x404 +#define MX6Q_MMDC_MPDGCTRL0 0x83c +#define MX6Q_GPC_IMR1 0x08 +#define MX6Q_GPC_IMR2 0x0c +#define MX6Q_GPC_IMR3 0x10 +#define MX6Q_GPC_IMR4 0x14 +#define MX6Q_CCM_CCR 0x0 + + .align 3 + + .macro sync_l2_cache + + /* sync L2 cache to drain L2's buffers to DRAM. */ +#ifdef CONFIG_CACHE_L2X0 + ldr r11, [r0, #PM_INFO_MX6Q_L2_V_OFFSET] + mov r6, #0x0 + str r6, [r11, #L2X0_CACHE_SYNC] +1: + ldr r6, [r11, #L2X0_CACHE_SYNC] + ands r6, r6, #0x1 + bne 1b +#endif + + .endm + + .macro resume_mmdc + + /* restore MMDC IO */ + cmp r5, #0x0 + ldreq r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET] + ldrne r11, [r0, #PM_INFO_MX6Q_IOMUXC_P_OFFSET] + + ldr r6, [r0, #PM_INFO_MMDC_IO_NUM_OFFSET] + ldr r7, =PM_INFO_MMDC_IO_VAL_OFFSET + add r7, r7, r0 +1: + ldr r8, [r7], #0x4 + ldr r9, [r7], #0x4 + str r9, [r11, r8] + subs r6, r6, #0x1 + bne 1b + + cmp r5, #0x0 + ldreq r11, [r0, #PM_INFO_MX6Q_MMDC_V_OFFSET] + ldrne r11, [r0, #PM_INFO_MX6Q_MMDC_P_OFFSET] + + cmp r3, #MXC_CPU_IMX6SL + bne 4f + + /* reset read FIFO, RST_RD_FIFO */ + ldr r7, =MX6Q_MMDC_MPDGCTRL0 + ldr r6, [r11, r7] + orr r6, r6, #(1 << 31) + str r6, [r11, r7] +2: + ldr r6, [r11, r7] + ands r6, r6, #(1 << 31) + bne 2b + + /* reset FIFO a second time */ + ldr r6, [r11, r7] + orr r6, r6, #(1 << 31) + str r6, [r11, r7] +3: + ldr r6, [r11, r7] + ands r6, r6, #(1 << 31) + bne 3b +4: + /* let DDR out of self-refresh */ + ldr r7, [r11, #MX6Q_MMDC_MAPSR] + bic r7, r7, #(1 << 21) + str r7, [r11, #MX6Q_MMDC_MAPSR] +5: + ldr r7, [r11, #MX6Q_MMDC_MAPSR] + ands r7, r7, #(1 << 25) + bne 5b + + /* enable DDR auto power saving */ + ldr r7, [r11, #MX6Q_MMDC_MAPSR] + bic r7, r7, #0x1 + str r7, [r11, #MX6Q_MMDC_MAPSR] + + .endm + +ENTRY(imx6_suspend) + ldr r1, [r0, #PM_INFO_PBASE_OFFSET] + ldr r2, [r0, #PM_INFO_RESUME_ADDR_OFFSET] + ldr r3, [r0, #PM_INFO_CPU_TYPE_OFFSET] + ldr r4, [r0, #PM_INFO_PM_INFO_SIZE_OFFSET] + + /* + * counting the resume address in iram + * to set it in SRC register. + */ + ldr r6, =imx6_suspend + ldr r7, =resume + sub r7, r7, r6 + add r8, r1, r4 + add r9, r8, r7 + + /* + * make sure TLB contain the addr we want, + * as we will access them after MMDC IO floated. + */ + + ldr r11, [r0, #PM_INFO_MX6Q_CCM_V_OFFSET] + ldr r6, [r11, #0x0] + ldr r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET] + ldr r6, [r11, #0x0] + + /* use r11 to store the IO address */ + ldr r11, [r0, #PM_INFO_MX6Q_SRC_V_OFFSET] + /* store physical resume addr and pm_info address. */ + str r9, [r11, #MX6Q_SRC_GPR1] + str r1, [r11, #MX6Q_SRC_GPR2] + + /* need to sync L2 cache before DSM. */ + sync_l2_cache + + ldr r11, [r0, #PM_INFO_MX6Q_MMDC_V_OFFSET] + /* + * put DDR explicitly into self-refresh and + * disable automatic power savings. + */ + ldr r7, [r11, #MX6Q_MMDC_MAPSR] + orr r7, r7, #0x1 + str r7, [r11, #MX6Q_MMDC_MAPSR] + + /* make the DDR explicitly enter self-refresh. */ + ldr r7, [r11, #MX6Q_MMDC_MAPSR] + orr r7, r7, #(1 << 21) + str r7, [r11, #MX6Q_MMDC_MAPSR] + +poll_dvfs_set: + ldr r7, [r11, #MX6Q_MMDC_MAPSR] + ands r7, r7, #(1 << 25) + beq poll_dvfs_set + + ldr r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET] + ldr r6, =0x0 + ldr r7, [r0, #PM_INFO_MMDC_IO_NUM_OFFSET] + ldr r8, =PM_INFO_MMDC_IO_VAL_OFFSET + add r8, r8, r0 + /* i.MX6SL's last 3 IOs need special setting */ + cmp r3, #MXC_CPU_IMX6SL + subeq r7, r7, #0x3 +set_mmdc_io_lpm: + ldr r9, [r8], #0x8 + str r6, [r11, r9] + subs r7, r7, #0x1 + bne set_mmdc_io_lpm + + cmp r3, #MXC_CPU_IMX6SL + bne set_mmdc_io_lpm_done + ldr r6, =0x1000 + ldr r9, [r8], #0x8 + str r6, [r11, r9] + ldr r9, [r8], #0x8 + str r6, [r11, r9] + ldr r6, =0x80000 + ldr r9, [r8] + str r6, [r11, r9] +set_mmdc_io_lpm_done: + + /* + * mask all GPC interrupts before + * enabling the RBC counters to + * avoid the counter starting too + * early if an interupt is already + * pending. + */ + ldr r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET] + ldr r6, [r11, #MX6Q_GPC_IMR1] + ldr r7, [r11, #MX6Q_GPC_IMR2] + ldr r8, [r11, #MX6Q_GPC_IMR3] + ldr r9, [r11, #MX6Q_GPC_IMR4] + + ldr r10, =0xffffffff + str r10, [r11, #MX6Q_GPC_IMR1] + str r10, [r11, #MX6Q_GPC_IMR2] + str r10, [r11, #MX6Q_GPC_IMR3] + str r10, [r11, #MX6Q_GPC_IMR4] + + /* + * enable the RBC bypass counter here + * to hold off the interrupts. RBC counter + * = 32 (1ms), Minimum RBC delay should be + * 400us for the analog LDOs to power down. + */ + ldr r11, [r0, #PM_INFO_MX6Q_CCM_V_OFFSET] + ldr r10, [r11, #MX6Q_CCM_CCR] + bic r10, r10, #(0x3f << 21) + orr r10, r10, #(0x20 << 21) + str r10, [r11, #MX6Q_CCM_CCR] + + /* enable the counter. */ + ldr r10, [r11, #MX6Q_CCM_CCR] + orr r10, r10, #(0x1 << 27) + str r10, [r11, #MX6Q_CCM_CCR] + + /* unmask all the GPC interrupts. */ + ldr r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET] + str r6, [r11, #MX6Q_GPC_IMR1] + str r7, [r11, #MX6Q_GPC_IMR2] + str r8, [r11, #MX6Q_GPC_IMR3] + str r9, [r11, #MX6Q_GPC_IMR4] + + /* + * now delay for a short while (3usec) + * ARM is at 1GHz at this point + * so a short loop should be enough. + * this delay is required to ensure that + * the RBC counter can start counting in + * case an interrupt is already pending + * or in case an interrupt arrives just + * as ARM is about to assert DSM_request. + */ + ldr r6, =2000 +rbc_loop: + subs r6, r6, #0x1 + bne rbc_loop + + /* Zzz, enter stop mode */ + wfi + nop + nop + nop + nop + + /* + * run to here means there is pending + * wakeup source, system should auto + * resume, we need to restore MMDC IO first + */ + mov r5, #0x0 + resume_mmdc + + /* return to suspend finish */ + mov pc, lr + +resume: + /* invalidate L1 I-cache first */ + mov r6, #0x0 + mcr p15, 0, r6, c7, c5, 0 + mcr p15, 0, r6, c7, c5, 6 + /* enable the Icache and branch prediction */ + mov r6, #0x1800 + mcr p15, 0, r6, c1, c0, 0 + isb + + /* get physical resume address from pm_info. */ + ldr lr, [r0, #PM_INFO_RESUME_ADDR_OFFSET] + /* clear core0's entry and parameter */ + ldr r11, [r0, #PM_INFO_MX6Q_SRC_P_OFFSET] + mov r7, #0x0 + str r7, [r11, #MX6Q_SRC_GPR1] + str r7, [r11, #MX6Q_SRC_GPR2] + + ldr r3, [r0, #PM_INFO_CPU_TYPE_OFFSET] + mov r5, #0x1 + resume_mmdc + + mov pc, lr +ENDPROC(imx6_suspend) + +/* + * The following code must assume it is running from physical address + * where absolute virtual addresses to the data section have to be + * turned into relative ones. + */ + +#ifdef CONFIG_CACHE_L2X0 + .macro pl310_resume + adr r0, l2x0_saved_regs_offset + ldr r2, [r0] + add r2, r2, r0 + ldr r0, [r2, #L2X0_R_PHY_BASE] @ get physical base of l2x0 + ldr r1, [r2, #L2X0_R_AUX_CTRL] @ get aux_ctrl value + str r1, [r0, #L2X0_AUX_CTRL] @ restore aux_ctrl + mov r1, #0x1 + str r1, [r0, #L2X0_CTRL] @ re-enable L2 + .endm + +l2x0_saved_regs_offset: + .word l2x0_saved_regs - . + +#else + .macro pl310_resume + .endm +#endif + +ENTRY(v7_cpu_resume) + bl v7_invalidate_l1 + pl310_resume + b cpu_resume +ENDPROC(v7_cpu_resume) diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c index 1a3a5f615770..65222ea0df6d 100644 --- a/arch/arm/mach-imx/time.c +++ b/arch/arm/mach-imx/time.c @@ -25,6 +25,7 @@ #include <linux/irq.h> #include <linux/clockchips.h> #include <linux/clk.h> +#include <linux/delay.h> #include <linux/err.h> #include <linux/sched_clock.h> @@ -116,11 +117,22 @@ static u64 notrace mxc_read_sched_clock(void) return sched_clock_reg ? __raw_readl(sched_clock_reg) : 0; } +static struct delay_timer imx_delay_timer; + +static unsigned long imx_read_current_timer(void) +{ + return __raw_readl(sched_clock_reg); +} + static int __init mxc_clocksource_init(struct clk *timer_clk) { unsigned int c = clk_get_rate(timer_clk); void __iomem *reg = timer_base + (timer_is_v2() ? V2_TCN : MX1_2_TCN); + imx_delay_timer.read_current_timer = &imx_read_current_timer; + imx_delay_timer.freq = c; + register_current_timer_delay(&imx_delay_timer); + sched_clock_reg = reg; sched_clock_register(mxc_read_sched_clock, 32, c); diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig index 90a708fef541..f50bc936cb84 100644 --- a/arch/arm/mach-keystone/Kconfig +++ b/arch/arm/mach-keystone/Kconfig @@ -1,13 +1,9 @@ config ARCH_KEYSTONE bool "Texas Instruments Keystone Devices" depends on ARCH_MULTI_V7 - select CPU_V7 select ARM_GIC select HAVE_ARM_ARCH_TIMER - select HAVE_SMP select CLKSRC_MMIO - select GENERIC_CLOCKEVENTS - select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_ERRATA_798181 if SMP select COMMON_CLK_KEYSTONE select ARCH_SUPPORTS_BIG_ENDIAN diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig index 3795ae28a613..95a6a4b43c37 100644 --- a/arch/arm/mach-moxart/Kconfig +++ b/arch/arm/mach-moxart/Kconfig @@ -2,14 +2,9 @@ config ARCH_MOXART bool "MOXA ART SoC" if ARCH_MULTI_V4T select CPU_FA526 select ARM_DMA_MEM_BUFFERABLE - select USE_OF - select CLKSRC_OF select CLKSRC_MMIO - select HAVE_CLK - select COMMON_CLK select GENERIC_IRQ_CHIP select ARCH_REQUIRE_GPIOLIB - select GENERIC_CLOCKEVENTS select PHYLIB if NETDEVICES help Say Y here if you want to run your kernel on hardware with a diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 884b275ab056..f961ae4ec4ee 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -2,15 +2,10 @@ config ARCH_MVEBU bool "Marvell SOCs with Device Tree support" if ARCH_MULTI_V7 select ARCH_SUPPORTS_BIG_ENDIAN select CLKSRC_MMIO - select COMMON_CLK - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select IRQ_DOMAIN - select MULTI_IRQ_HANDLER select PINCTRL select PLAT_ORION - select SPARSE_IRQ - select CLKDEV_LOOKUP select MVEBU_MBUS select ZONE_DMA if ARM_LPAE select ARCH_REQUIRE_GPIOLIB @@ -24,7 +19,6 @@ menu "Marvell SOC with device tree" config MACH_MVEBU_V7 bool select ARMADA_370_XP_TIMER - select HAVE_SMP select CACHE_L2X0 config MACH_ARMADA_370 diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 8cde9e05b5d6..84794137b175 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -16,11 +16,7 @@ config ARCH_MXS bool "Freescale MXS (i.MX23, i.MX28) support" depends on ARCH_MULTI_V5 select ARCH_REQUIRE_GPIOLIB - select CLKDEV_LOOKUP select CLKSRC_MMIO - select CLKSRC_OF - select GENERIC_CLOCKEVENTS - select HAVE_CLK_PREPARE select PINCTRL select SOC_BUS select SOC_IMX23 diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig index 4d42da49753c..486d301f43fd 100644 --- a/arch/arm/mach-nomadik/Kconfig +++ b/arch/arm/mach-nomadik/Kconfig @@ -6,16 +6,11 @@ config ARCH_NOMADIK select ARM_VIC select CLKSRC_NOMADIK_MTU select CLKSRC_NOMADIK_MTU_SCHED_CLOCK - select CLKSRC_OF - select COMMON_CLK select CPU_ARM926T - select GENERIC_CLOCKEVENTS select MIGHT_HAVE_CACHE_L2X0 select PINCTRL select PINCTRL_NOMADIK select PINCTRL_STN8815 - select SPARSE_IRQ - select USE_OF help Support for the Nomadik platform by ST-Ericsson diff --git a/arch/arm/mach-nspire/Kconfig b/arch/arm/mach-nspire/Kconfig index 59d8f0a70919..bc41f26c1a12 100644 --- a/arch/arm/mach-nspire/Kconfig +++ b/arch/arm/mach-nspire/Kconfig @@ -3,14 +3,9 @@ config ARCH_NSPIRE depends on ARCH_MULTI_V4_V5 depends on MMU select CPU_ARM926T - select COMMON_CLK - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP - select SPARSE_IRQ select ARM_AMBA select ARM_VIC select ARM_TIMER_SP804 - select USE_OF - select CLKSRC_OF help This enables support for systems using the TI-NSPIRE CPU diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 91449c5cb70f..85089d821982 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -156,6 +156,7 @@ static struct omap_usb_config nokia770_usb_config __initdata = { .register_dev = 1, .hmc_mode = 16, .pins[0] = 6, + .extcon = "tahvo-usb", }; #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 40fd5c31b594..e55ae63bb030 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -6,7 +6,6 @@ config ARCH_OMAP2 depends on ARCH_MULTI_V6 select ARCH_OMAP2PLUS select CPU_V6 - select MULTI_IRQ_HANDLER select SOC_HAS_OMAP2_SDRC config ARCH_OMAP3 @@ -15,8 +14,6 @@ config ARCH_OMAP3 select ARCH_OMAP2PLUS select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM - select CPU_V7 - select MULTI_IRQ_HANDLER select OMAP_INTERCONNECT select PM_OPP if PM select PM_RUNTIME if CPU_IDLE @@ -33,10 +30,8 @@ config ARCH_OMAP4 select ARM_ERRATA_720789 select ARM_GIC select CACHE_L2X0 - select CPU_V7 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_SMP select OMAP_INTERCONNECT select PL310_ERRATA_588369 select PL310_ERRATA_727915 @@ -50,12 +45,11 @@ config SOC_OMAP5 bool "TI OMAP5" depends on ARCH_MULTI_V7 select ARCH_OMAP2PLUS + select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM select ARM_GIC - select CPU_V7 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_SMP select HAVE_ARM_ARCH_TIMER select ARM_ERRATA_798181 if SMP @@ -63,16 +57,14 @@ config SOC_AM33XX bool "TI AM33XX" depends on ARCH_MULTI_V7 select ARCH_OMAP2PLUS + select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM - select CPU_V7 - select MULTI_IRQ_HANDLER config SOC_AM43XX bool "TI AM43x" depends on ARCH_MULTI_V7 - select CPU_V7 select ARCH_OMAP2PLUS - select MULTI_IRQ_HANDLER + select ARCH_HAS_OPP select ARM_GIC select MACH_OMAP_GENERIC @@ -80,10 +72,9 @@ config SOC_DRA7XX bool "TI DRA7XX" depends on ARCH_MULTI_V7 select ARCH_OMAP2PLUS + select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM select ARM_GIC - select CPU_V7 - select HAVE_SMP select HAVE_ARM_ARCH_TIMER config ARCH_OMAP2PLUS @@ -94,17 +85,13 @@ config ARCH_OMAP2PLUS select ARCH_OMAP select ARCH_REQUIRE_GPIOLIB select CLKSRC_MMIO - select COMMON_CLK - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select MACH_OMAP_GENERIC select OMAP_DM_TIMER select PINCTRL select PROC_DEVICETREE if PROC_FS select SOC_BUS - select SPARSE_IRQ select TI_PRIV_EDMA - select USE_OF help Systems based on OMAP2, OMAP3, OMAP4 or OMAP5 @@ -262,9 +249,6 @@ config MACH_OMAP_3430SDP default y select OMAP_PACKAGE_CBB -config MACH_NOKIA_N800 - bool - config MACH_NOKIA_N810 bool @@ -275,7 +259,6 @@ config MACH_NOKIA_N8X0 bool "Nokia N800/N810" depends on SOC_OMAP2420 default y - select MACH_NOKIA_N800 select MACH_NOKIA_N810 select MACH_NOKIA_N810_WIMAX diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index d24926e6340f..ab43755364f5 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1339,7 +1339,7 @@ static void __maybe_unused gpmc_read_timings_dt(struct device_node *np, of_property_read_bool(np, "gpmc,time-para-granularity"); } -#ifdef CONFIG_MTD_NAND +#if IS_ENABLED(CONFIG_MTD_NAND) static const char * const nand_xfer_types[] = { [NAND_OMAP_PREFETCH_POLLED] = "prefetch-polled", @@ -1429,7 +1429,7 @@ static int gpmc_probe_nand_child(struct platform_device *pdev, } #endif -#ifdef CONFIG_MTD_ONENAND +#if IS_ENABLED(CONFIG_MTD_ONENAND) static int gpmc_probe_onenand_child(struct platform_device *pdev, struct device_node *child) { diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index d9714113a01a..f14f9ac2dca1 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -179,15 +179,6 @@ static struct map_desc omap34xx_io_desc[] __initdata = { .length = L4_EMU_34XX_SIZE, .type = MT_DEVICE }, -#if defined(CONFIG_DEBUG_LL) && \ - (defined(CONFIG_MACH_OMAP_ZOOM2) || defined(CONFIG_MACH_OMAP_ZOOM3)) - { - .virtual = ZOOM_UART_VIRT, - .pfn = __phys_to_pfn(ZOOM_UART_BASE), - .length = SZ_1M, - .type = MT_DEVICE - }, -#endif }; #endif diff --git a/arch/arm/mach-picoxcell/Kconfig b/arch/arm/mach-picoxcell/Kconfig index b1022f4315f7..eca9eb1c5931 100644 --- a/arch/arm/mach-picoxcell/Kconfig +++ b/arch/arm/mach-picoxcell/Kconfig @@ -1,12 +1,7 @@ config ARCH_PICOXCELL bool "Picochip PicoXcell" if ARCH_MULTI_V6 select ARCH_REQUIRE_GPIOLIB - select ARM_PATCH_PHYS_VIRT select ARM_VIC - select CPU_V6K select DW_APB_TIMER_OF - select GENERIC_CLOCKEVENTS select HAVE_TCM select NO_IOPORT - select SPARSE_IRQ - select USE_OF diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig index 6988b117fc17..2c726b4f9356 100644 --- a/arch/arm/mach-prima2/Kconfig +++ b/arch/arm/mach-prima2/Kconfig @@ -1,9 +1,7 @@ config ARCH_SIRF bool "CSR SiRF" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP - select MIGHT_HAVE_CACHE_L2X0 select NO_IOPORT select PINCTRL select PINCTRL_SIRF @@ -17,7 +15,6 @@ menu "CSR SiRF atlas6/primaII/Marco/Polo Specific Features" config ARCH_ATLAS6 bool "CSR SiRFSoC ATLAS6 ARM Cortex A9 Platform" default y - select CPU_V7 select SIRF_IRQ help Support for CSR SiRFSoC ARM Cortex A9 Platform @@ -25,7 +22,6 @@ config ARCH_ATLAS6 config ARCH_PRIMA2 bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform" default y - select CPU_V7 select SIRF_IRQ select ZONE_DMA help @@ -35,9 +31,7 @@ config ARCH_MARCO bool "CSR SiRFSoC MARCO ARM Cortex A9 Platform" default y select ARM_GIC - select CPU_V7 select HAVE_ARM_SCU if SMP - select HAVE_SMP select SMP_ON_UP if SMP help Support for CSR SiRFSoC ARM Cortex A9 Platform diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index f70583fee59f..29997bde277d 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -38,6 +38,7 @@ #include <linux/mtd/physmap.h> #include <linux/usb/gpio_vbus.h> #include <linux/reboot.h> +#include <linux/regulator/fixed.h> #include <linux/regulator/max1586.h> #include <linux/slab.h> #include <linux/i2c/pxa-i2c.h> @@ -714,6 +715,10 @@ static struct gpio global_gpios[] = { { GPIO56_MT9M111_nOE, GPIOF_OUT_INIT_LOW, "Camera nOE" }, }; +static struct regulator_consumer_supply fixed_5v0_consumers[] = { + REGULATOR_SUPPLY("power", "pwm-backlight"), +}; + static void __init mioa701_machine_init(void) { int rc; @@ -753,6 +758,10 @@ static void __init mioa701_machine_init(void) pxa_set_i2c_info(&i2c_pdata); pxa27x_set_i2c_power_info(NULL); pxa_set_camera_info(&mioa701_pxacamera_platform_data); + + regulator_register_always_on(0, "fixed-5.0V", fixed_5v0_consumers, + ARRAY_SIZE(fixed_5v0_consumers), + 5000000); } static void mioa701_machine_exit(void) diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index 133410e178a7..1caee6d548b8 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -7,9 +7,6 @@ config ARCH_ROCKCHIP select CACHE_L2X0 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_SMP - select COMMON_CLK - select GENERIC_CLOCKEVENTS select DW_APB_TIMER_OF select ARM_GLOBAL_TIMER select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 05fa505df585..8a685edf3bbc 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -5,18 +5,13 @@ config ARCH_SHMOBILE_MULTI bool "Renesas ARM SoCs" if ARCH_MULTI_V7 depends on MMU select ARCH_SHMOBILE - select CPU_V7 - select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_SMP select ARM_GIC - select MIGHT_HAVE_CACHE_L2X0 select MIGHT_HAVE_PCI select NO_IOPORT select PINCTRL select ARCH_REQUIRE_GPIOLIB - select CLKDEV_LOOKUP if ARCH_SHMOBILE_MULTI diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index aee77f06f887..b5f8d75d51a0 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -1,17 +1,10 @@ config ARCH_SOCFPGA bool "Altera SOCFPGA family" if ARCH_MULTI_V7 - select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_AMBA select ARM_GIC select CACHE_L2X0 - select COMMON_CLK - select CPU_V7 select DW_APB_TIMER_OF - select GENERIC_CLOCKEVENTS select GPIO_PL061 if GPIOLIB select HAVE_ARM_SCU select HAVE_ARM_TWD if SMP - select HAVE_SMP select MFD_SYSCON - select SPARSE_IRQ - select USE_OF diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig index ac1710e64d9a..5c57262b97e9 100644 --- a/arch/arm/mach-spear/Kconfig +++ b/arch/arm/mach-spear/Kconfig @@ -8,8 +8,6 @@ menuconfig PLAT_SPEAR select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select CLKSRC_MMIO - select COMMON_CLK - select GENERIC_CLOCKEVENTS if PLAT_SPEAR @@ -18,14 +16,10 @@ config ARCH_SPEAR13XX depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE select ARCH_HAS_CPUFREQ select ARM_GIC - select CPU_V7 select GPIO_SPEAR_SPICS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_SMP - select MIGHT_HAVE_CACHE_L2X0 select PINCTRL - select USE_OF help Supports for ARM's SPEAR13XX family @@ -50,9 +44,7 @@ config ARCH_SPEAR3XX depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE depends on !ARCH_SPEAR13XX select ARM_VIC - select CPU_ARM926T select PINCTRL - select USE_OF help Supports for ARM's SPEAR3XX family @@ -83,14 +75,12 @@ config ARCH_SPEAR6XX depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE depends on !ARCH_SPEAR13XX select ARM_VIC - select CPU_ARM926T help Supports for ARM's SPEAR6XX family config MACH_SPEAR600 def_bool y depends on ARCH_SPEAR6XX - select USE_OF help Supports ST SPEAr600 boards configured via the device-treesource "arch/arm/mach-spear6xx/Kconfig" diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig index d71654bc8d54..d2c13ba1190b 100644 --- a/arch/arm/mach-sti/Kconfig +++ b/arch/arm/mach-sti/Kconfig @@ -1,14 +1,10 @@ menuconfig ARCH_STI bool "STMicroelectronics Consumer Electronics SOCs with Device Trees" if ARCH_MULTI_V7 - select GENERIC_CLOCKEVENTS - select CLKDEV_LOOKUP select ARM_GIC select ARM_GLOBAL_TIMER select PINCTRL select PINCTRL_ST select MFD_SYSCON - select MIGHT_HAVE_CACHE_L2X0 - select HAVE_SMP select HAVE_ARM_SCU if SMP select ARCH_REQUIRE_GPIOLIB select ARM_ERRATA_754322 diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index b9d6cad8669b..9de27cfa688f 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -5,14 +5,9 @@ config ARCH_SUNXI select ARM_GIC select ARM_PSCI select CLKSRC_MMIO - select CLKSRC_OF - select COMMON_CLK - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP - select HAVE_SMP select PINCTRL select PINCTRL_SUNXI select RESET_CONTROLLER - select SPARSE_IRQ select SUN4I_TIMER select SUN5I_HSTIMER diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index b1232d8be6f5..f61cd5b9f103 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -5,24 +5,16 @@ config ARCH_TEGRA select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS select ARM_GIC select CLKSRC_MMIO - select CLKSRC_OF - select COMMON_CLK - select CPU_V7 - select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_SMP - select MIGHT_HAVE_CACHE_L2X0 select MIGHT_HAVE_PCI select PINCTRL select ARCH_HAS_RESET_CONTROLLER select RESET_CONTROLLER select SOC_BUS - select SPARSE_IRQ select USB_ARCH_HAS_EHCI if USB_SUPPORT select USB_ULPI if USB_PHY select USB_ULPI_VIEWPORT if USB_PHY - select USE_OF help This enables support for NVIDIA Tegra based systems. diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c index 4ae0286b468d..f55b05a29b55 100644 --- a/arch/arm/mach-tegra/pm.c +++ b/arch/arm/mach-tegra/pm.c @@ -24,6 +24,7 @@ #include <linux/cpu_pm.h> #include <linux/suspend.h> #include <linux/err.h> +#include <linux/slab.h> #include <linux/clk/tegra.h> #include <asm/smp_plat.h> diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c index 303a285d80fd..6191603379e1 100644 --- a/arch/arm/mach-tegra/tegra.c +++ b/arch/arm/mach-tegra/tegra.c @@ -73,10 +73,20 @@ u32 tegra_uart_config[3] = { static void __init tegra_init_cache(void) { #ifdef CONFIG_CACHE_L2X0 + static const struct of_device_id pl310_ids[] __initconst = { + { .compatible = "arm,pl310-cache", }, + {} + }; + + struct device_node *np; int ret; void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000; u32 aux_ctrl, cache_type; + np = of_find_matching_node(NULL, pl310_ids); + if (!np) + return; + cache_type = readl(p + L2X0_CACHE_TYPE); aux_ctrl = (cache_type & 0x700) << (17-8); aux_ctrl |= 0x7C400001; diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig index 8e23071bd1b3..e3a96d7302e9 100644 --- a/arch/arm/mach-u300/Kconfig +++ b/arch/arm/mach-u300/Kconfig @@ -3,20 +3,14 @@ config ARCH_U300 depends on MMU select ARCH_REQUIRE_GPIOLIB select ARM_AMBA - select ARM_PATCH_PHYS_VIRT select ARM_VIC select CLKSRC_MMIO - select CLKSRC_OF - select COMMON_CLK select CPU_ARM926T - select GENERIC_CLOCKEVENTS select HAVE_TCM select PINCTRL select PINCTRL_COH901 select PINCTRL_U300 - select SPARSE_IRQ select MFD_SYSCON - select USE_OF help Support for ST-Ericsson U300 series mobile platforms. diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 0034d2cd6973..8052bd52450d 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -11,13 +11,8 @@ config ARCH_U8500 select ARM_GIC select CACHE_L2X0 select CLKSRC_NOMADIK_MTU - select COMMON_CLK - select CPU_V7 - select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_SMP - select MIGHT_HAVE_CACHE_L2X0 select PINCTRL select PINCTRL_ABX500 select PINCTRL_NOMADIK @@ -76,7 +71,6 @@ config UX500_AUTO_PLATFORM config MACH_UX500_DT bool "Generic U8500 support using device tree" depends on MACH_MOP500 - select USE_OF endmenu diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 4a70be485ff8..80b4be36f10a 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -5,16 +5,11 @@ config ARCH_VEXPRESS select ARM_AMBA select ARM_GIC select ARM_TIMER_SP804 - select COMMON_CLK select COMMON_CLK_VERSATILE - select CPU_V7 - select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select HAVE_PATA_PLATFORM - select HAVE_SMP select ICST - select MIGHT_HAVE_CACHE_L2X0 select NO_IOPORT select PLAT_VERSATILE select PLAT_VERSATILE_CLCD diff --git a/arch/arm/mach-virt/Kconfig b/arch/arm/mach-virt/Kconfig deleted file mode 100644 index 081d46929436..000000000000 --- a/arch/arm/mach-virt/Kconfig +++ /dev/null @@ -1,10 +0,0 @@ -config ARCH_VIRT - bool "Dummy Virtual Machine" if ARCH_MULTI_V7 - select ARCH_WANT_OPTIONAL_GPIOLIB - select ARM_GIC - select HAVE_ARM_ARCH_TIMER - select ARM_PSCI - select HAVE_SMP - select CPU_V7 - select SPARSE_IRQ - select USE_OF diff --git a/arch/arm/mach-virt/Makefile b/arch/arm/mach-virt/Makefile deleted file mode 100644 index 7ddbfa60227f..000000000000 --- a/arch/arm/mach-virt/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the linux kernel. -# - -obj-y := virt.o diff --git a/arch/arm/mach-virt/virt.c b/arch/arm/mach-virt/virt.c deleted file mode 100644 index b184e57d1854..000000000000 --- a/arch/arm/mach-virt/virt.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Dummy Virtual Machine - does what it says on the tin. - * - * Copyright (C) 2012 ARM Ltd - * Authors: Will Deacon <will.deacon@arm.com>, - * Marc Zyngier <marc.zyngier@arm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <linux/of_irq.h> -#include <linux/of_platform.h> -#include <linux/smp.h> - -#include <asm/mach/arch.h> - -static void __init virt_init(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - -static const char *virt_dt_match[] = { - "linux,dummy-virt", - "xen,xenvm", - NULL -}; - -DT_MACHINE_START(VIRT, "Dummy Virtual Machine") - .init_machine = virt_init, - .dt_compat = virt_dt_match, -MACHINE_END diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig index 927be93b692e..08f56a41cb55 100644 --- a/arch/arm/mach-vt8500/Kconfig +++ b/arch/arm/mach-vt8500/Kconfig @@ -3,8 +3,6 @@ config ARCH_VT8500 select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP - select CLKSRC_OF - select GENERIC_CLOCKEVENTS select VT8500_TIMER select PINCTRL help @@ -21,7 +19,6 @@ config ARCH_WM8750 bool "WonderMedia WM8750" depends on ARCH_MULTI_V6 select ARCH_VT8500 - select CPU_V6 help Support for WonderMedia WM8750 System-on-Chip. @@ -29,6 +26,5 @@ config ARCH_WM8850 bool "WonderMedia WM8850" depends on ARCH_MULTI_V7 select ARCH_VT8500 - select CPU_V7 help Support for WonderMedia WM8850 System-on-Chip. diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig index 6b04260aa142..105d39b72a25 100644 --- a/arch/arm/mach-zynq/Kconfig +++ b/arch/arm/mach-zynq/Kconfig @@ -2,16 +2,9 @@ config ARCH_ZYNQ bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7 select ARM_AMBA select ARM_GIC - select COMMON_CLK - select CPU_V7 - select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select ICST - select MIGHT_HAVE_CACHE_L2X0 - select USE_OF - select HAVE_SMP - select SPARSE_IRQ select CADENCE_TTC_TIMER select ARM_GLOBAL_TIMER help diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 1a77450e728a..11b3914660d2 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -1358,7 +1358,7 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, *handle = DMA_ERROR_CODE; size = PAGE_ALIGN(size); - if (gfp & GFP_ATOMIC) + if (!(gfp & __GFP_WAIT)) return __iommu_alloc_atomic(dev, size, handle); /* diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index d5a982d15a88..7ea641b7aa7d 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -38,6 +38,7 @@ static inline pmd_t *pmd_off_k(unsigned long virt) struct mem_type { pteval_t prot_pte; + pteval_t prot_pte_s2; pmdval_t prot_l1; pmdval_t prot_sect; unsigned int domain; diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 4f08c133cc25..a623cb3ad012 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -232,12 +232,16 @@ __setup("noalign", noalign_setup); #endif /* ifdef CONFIG_CPU_CP15 / else */ #define PROT_PTE_DEVICE L_PTE_PRESENT|L_PTE_YOUNG|L_PTE_DIRTY|L_PTE_XN +#define PROT_PTE_S2_DEVICE PROT_PTE_DEVICE #define PROT_SECT_DEVICE PMD_TYPE_SECT|PMD_SECT_AP_WRITE static struct mem_type mem_types[] = { [MT_DEVICE] = { /* Strongly ordered / ARMv6 shared device */ .prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_SHARED | L_PTE_SHARED, + .prot_pte_s2 = s2_policy(PROT_PTE_S2_DEVICE) | + s2_policy(L_PTE_S2_MT_DEV_SHARED) | + L_PTE_SHARED, .prot_l1 = PMD_TYPE_TABLE, .prot_sect = PROT_SECT_DEVICE | PMD_SECT_S, .domain = DOMAIN_IO, @@ -508,7 +512,8 @@ static void __init build_mem_type_table(void) cp = &cache_policies[cachepolicy]; vecs_pgprot = kern_pgprot = user_pgprot = cp->pte; s2_pgprot = cp->pte_s2; - hyp_device_pgprot = s2_device_pgprot = mem_types[MT_DEVICE].prot_pte; + hyp_device_pgprot = mem_types[MT_DEVICE].prot_pte; + s2_device_pgprot = mem_types[MT_DEVICE].prot_pte_s2; /* * ARMv6 and above have extended page tables. diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 45dc29f85d56..32b3558321c4 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -208,7 +208,6 @@ __v6_setup: mcr p15, 0, r0, c7, c14, 0 @ clean+invalidate D cache mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c15, 0 @ clean+invalidate cache - mcr p15, 0, r0, c7, c10, 4 @ drain write buffer #ifdef CONFIG_MMU mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs mcr p15, 0, r0, c2, c0, 2 @ TTB control register @@ -218,6 +217,8 @@ __v6_setup: ALT_UP(orr r8, r8, #TTB_FLAGS_UP) mcr p15, 0, r8, c2, c0, 1 @ load TTB1 #endif /* CONFIG_MMU */ + mcr p15, 0, r0, c7, c10, 4 @ drain write buffer and + @ complete invalidations adr r5, v6_crval ldmia r5, {r5, r6} ARM_BE8(orr r6, r6, #1 << 25) @ big-endian page tables diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index bd1781979a39..74f6033e76dd 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -351,7 +351,6 @@ __v7_setup: 4: mov r10, #0 mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate - dsb #ifdef CONFIG_MMU mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs v7_ttb_setup r10, r4, r8, r5 @ TTBCR, TTBRx setup @@ -360,6 +359,7 @@ __v7_setup: mcr p15, 0, r5, c10, c2, 0 @ write PRRR mcr p15, 0, r6, c10, c2, 1 @ write NMRR #endif + dsb @ Complete invalidations #ifndef CONFIG_ARM_THUMBEE mrc p15, 0, r0, c0, c1, 0 @ read ID_PFR0 for ThumbEE and r0, r0, #(0xf << 12) @ ThumbEE enabled field |