diff options
Diffstat (limited to 'arch/blackfin/mach-bf533/include/mach/defBF532.h')
| -rw-r--r-- | arch/blackfin/mach-bf533/include/mach/defBF532.h | 115 |
1 files changed, 1 insertions, 114 deletions
diff --git a/arch/blackfin/mach-bf533/include/mach/defBF532.h b/arch/blackfin/mach-bf533/include/mach/defBF532.h index 02b328eb0e07..e9ff491c0953 100644 --- a/arch/blackfin/mach-bf533/include/mach/defBF532.h +++ b/arch/blackfin/mach-bf533/include/mach/defBF532.h @@ -370,72 +370,6 @@ /* System MMR Register Bits */ /******************************************************************************* */ -/* ********************* PLL AND RESET MASKS ************************ */ - -/* PLL_CTL Masks */ -#define PLL_CLKIN 0x0000 /* Pass CLKIN to PLL */ -#define PLL_CLKIN_DIV2 0x0001 /* Pass CLKIN/2 to PLL */ -#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ -#define PLL_OFF 0x0002 /* Shut off PLL clocks */ -#define STOPCK_OFF 0x0008 /* Core clock off */ -#define STOPCK 0x0008 /* Core Clock Off */ -#define PDWN 0x0020 /* Put the PLL in a Deep Sleep state */ -#if !defined(__ADSPBF538__) -/* this file is included in defBF538.h but IN_DELAY/OUT_DELAY are different */ -# define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */ -# define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */ -#endif -#define BYPASS 0x0100 /* Bypass the PLL */ -/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */ -#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ - -/* PLL_DIV Masks */ -#define SSEL 0x000F /* System Select */ -#define CSEL 0x0030 /* Core Select */ - -#define SCLK_DIV(x) (x) /* SCLK = VCO / x */ - -#define CCLK_DIV1 0x00000000 /* CCLK = VCO / 1 */ -#define CCLK_DIV2 0x00000010 /* CCLK = VCO / 2 */ -#define CCLK_DIV4 0x00000020 /* CCLK = VCO / 4 */ -#define CCLK_DIV8 0x00000030 /* CCLK = VCO / 8 */ -/* PLL_DIV Macros */ -#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ - -/* PLL_STAT Masks */ -#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ -#define FULL_ON 0x0002 /* Processor In Full On Mode */ -#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ -#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ - -/* VR_CTL Masks */ -#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */ -#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ -#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ -#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ -#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ - -#define GAIN 0x000C /* Voltage Level Gain */ -#define GAIN_5 0x0000 /* GAIN = 5 */ -#define GAIN_10 0x0004 /* GAIN = 10 */ -#define GAIN_20 0x0008 /* GAIN = 20 */ -#define GAIN_50 0x000C /* GAIN = 50 */ - -#define VLEV 0x00F0 /* Internal Voltage Level */ -#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ -#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ -#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ -#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ -#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ -#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ -#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ -#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ -#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ -#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ - -#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ -#define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */ - /* CHIPID Masks */ #define CHIPID_VERSION 0xF0000000 #define CHIPID_FAMILY 0x0FFFF000 @@ -703,54 +637,7 @@ /* ********** DMA CONTROLLER MASKS *********************8 */ -/*DMAx_CONFIG, MDMA_yy_CONFIG Masks */ -#define DMAEN 0x00000001 /* Channel Enable */ -#define WNR 0x00000002 /* Channel Direction (W/R*) */ -#define WDSIZE_8 0x00000000 /* Word Size 8 bits */ -#define WDSIZE_16 0x00000004 /* Word Size 16 bits */ -#define WDSIZE_32 0x00000008 /* Word Size 32 bits */ -#define DMA2D 0x00000010 /* 2D/1D* Mode */ -#define RESTART 0x00000020 /* Restart */ -#define DI_SEL 0x00000040 /* Data Interrupt Select */ -#define DI_EN 0x00000080 /* Data Interrupt Enable */ -#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ -#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ -#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ -#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ -#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ -#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ -#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ -#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ -#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ -#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ -#define NDSIZE 0x00000900 /* Next Descriptor Size */ -#define DMAFLOW 0x00007000 /* Flow Control */ -#define DMAFLOW_STOP 0x0000 /* Stop Mode */ -#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ -#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ -#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ -#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ - -#define DMAEN_P 0 /* Channel Enable */ -#define WNR_P 1 /* Channel Direction (W/R*) */ -#define DMA2D_P 4 /* 2D/1D* Mode */ -#define RESTART_P 5 /* Restart */ -#define DI_SEL_P 6 /* Data Interrupt Select */ -#define DI_EN_P 7 /* Data Interrupt Enable */ - -/*DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */ - -#define DMA_DONE 0x00000001 /* DMA Done Indicator */ -#define DMA_ERR 0x00000002 /* DMA Error Indicator */ -#define DFETCH 0x00000004 /* Descriptor Fetch Indicator */ -#define DMA_RUN 0x00000008 /* DMA Running Indicator */ - -#define DMA_DONE_P 0 /* DMA Done Indicator */ -#define DMA_ERR_P 1 /* DMA Error Indicator */ -#define DFETCH_P 2 /* Descriptor Fetch Indicator */ -#define DMA_RUN_P 3 /* DMA Running Indicator */ - -/*DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ +/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ #define CTYPE 0x00000040 /* DMA Channel Type Indicator */ #define CTYPE_P 6 /* DMA Channel Type Indicator BIT POSITION */ |