diff options
Diffstat (limited to 'arch/blackfin/mach-bf533')
| -rw-r--r-- | arch/blackfin/mach-bf533/boards/H8606.c | 10 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf533/boards/blackstamp.c | 5 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf533/boards/cm_bf533.c | 10 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf533/boards/ezkit.c | 12 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf533/boards/ip0x.c | 3 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf533/boards/stamp.c | 20 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf533/include/mach/cdefBF532.h | 91 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf533/include/mach/defBF532.h | 70 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf533/include/mach/fio_flag.h | 55 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf533/include/mach/pll.h | 57 |
10 files changed, 148 insertions, 185 deletions
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index 175371af0692..2ce7b16faee1 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -171,7 +171,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) +#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -206,12 +206,12 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) +#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) { - .modalias = "ad1836", + .modalias = "ad183x", .max_speed_hz = 16, .bus_num = 1, - .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, + .chip_select = 4, .controller_data = &ad1836_spi_chip_info, }, #endif @@ -347,6 +347,7 @@ static struct plat_serial8250_port serial8250_platform_data [] = { .membase = (void *)0x20200000, .mapbase = 0x20200000, .irq = IRQ_PF8, + .irqflags = IRQF_TRIGGER_HIGH, .flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE, .iotype = UPIO_MEM, .regshift = 1, @@ -355,6 +356,7 @@ static struct plat_serial8250_port serial8250_platform_data [] = { .membase = (void *)0x20200010, .mapbase = 0x20200010, .irq = IRQ_PF8, + .irqflags = IRQF_TRIGGER_HIGH, .flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE, .iotype = UPIO_MEM, .regshift = 1, diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c index 842b4fa76ea9..20c102285bef 100644 --- a/arch/blackfin/mach-bf533/boards/blackstamp.c +++ b/arch/blackfin/mach-bf533/boards/blackstamp.c @@ -25,6 +25,7 @@ #include <asm/bfin5xx_spi.h> #include <asm/portmux.h> #include <asm/dpmc.h> +#include <mach/fio_flag.h> /* * Name the Board for the /proc/cpuinfo @@ -367,8 +368,8 @@ static struct platform_device bfin_device_gpiokeys = { #include <linux/i2c-gpio.h> static struct i2c_gpio_platform_data i2c_gpio_data = { - .sda_pin = 8, - .scl_pin = 9, + .sda_pin = GPIO_PF8, + .scl_pin = GPIO_PF9, .sda_is_open_drain = 0, .scl_is_open_drain = 0, .udelay = 40, diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index fdcde61906dc..adbe62a81e25 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -71,7 +71,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) +#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -110,12 +110,12 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) +#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) { - .modalias = "ad1836", + .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, + .chip_select = 4, .controller_data = &ad1836_spi_chip_info, }, #endif @@ -400,7 +400,7 @@ static struct resource isp1362_hcd_resources[] = { }, { .start = IRQ_PF4, .end = IRQ_PF4, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 739773cb7fc6..a1cb8e7c1010 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -222,7 +222,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) +#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -261,12 +261,12 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) +#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) { - .modalias = "ad1836", + .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, + .chip_select = 4, .controller_data = &ad1836_spi_chip_info, }, #endif @@ -422,8 +422,8 @@ static struct platform_device bfin_device_gpiokeys = { #include <linux/i2c-gpio.h> static struct i2c_gpio_platform_data i2c_gpio_data = { - .sda_pin = 1, - .scl_pin = 0, + .sda_pin = GPIO_PF1, + .scl_pin = GPIO_PF0, .sda_is_open_drain = 0, .scl_is_open_drain = 0, .udelay = 40, diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c index 7349970db978..5ba4b02a12eb 100644 --- a/arch/blackfin/mach-bf533/boards/ip0x.c +++ b/arch/blackfin/mach-bf533/boards/ip0x.c @@ -22,6 +22,7 @@ #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/portmux.h> +#include <mach/fio_flag.h> /* * Name the Board for the /proc/cpuinfo @@ -231,7 +232,7 @@ static struct resource isp1362_hcd_resources[] = { },{ .start = IRQ_PF11, .end = IRQ_PF11, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index c457eaa60239..b3b1cdea2703 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -24,6 +24,7 @@ #include <asm/reboot.h> #include <asm/portmux.h> #include <asm/dpmc.h> +#include <mach/fio_flag.h> /* * Name the Board for the /proc/cpuinfo @@ -184,7 +185,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) +#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -251,13 +252,15 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) +#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) { - .modalias = "ad1836", + .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, + .chip_select = 4, + .platform_data = "ad1836", /* only includes chip name for the moment */ .controller_data = &ad1836_spi_chip_info, + .mode = SPI_MODE_3, }, #endif @@ -494,8 +497,8 @@ static struct platform_device bfin_device_gpiokeys = { #include <linux/i2c-gpio.h> static struct i2c_gpio_platform_data i2c_gpio_data = { - .sda_pin = 2, - .scl_pin = 3, + .sda_pin = GPIO_PF2, + .scl_pin = GPIO_PF3, .sda_is_open_drain = 0, .scl_is_open_drain = 0, .udelay = 40, @@ -533,6 +536,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { I2C_BOARD_INFO("bfin-adv7393", 0x2B), }, #endif +#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) + { + I2C_BOARD_INFO("ad5252", 0x2f), + }, +#endif }; static const unsigned int cclk_vlev_datasheet[] = diff --git a/arch/blackfin/mach-bf533/include/mach/cdefBF532.h b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h index feb2392c43ea..401e524f5321 100644 --- a/arch/blackfin/mach-bf533/include/mach/cdefBF532.h +++ b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h @@ -7,11 +7,6 @@ #ifndef _CDEF_BF532_H #define _CDEF_BF532_H -#include <asm/blackfin.h> - -/*include all Core registers and bit definitions*/ -#include "defBF532.h" - /*include core specific register pointer definitions*/ #include <asm/cdef_LPBlackfin.h> @@ -655,90 +650,4 @@ /* These need to be last due to the cdef/linux inter-dependencies */ #include <asm/irq.h> -#if ANOMALY_05000311 -#define BFIN_WRITE_FIO_FLAG(name) \ -static inline void bfin_write_FIO_FLAG_##name(unsigned short val) \ -{ \ - unsigned long flags; \ - local_irq_save_hw(flags); \ - bfin_write16(FIO_FLAG_##name, val); \ - bfin_read_CHIPID(); \ - local_irq_restore_hw(flags); \ -} -BFIN_WRITE_FIO_FLAG(D) -BFIN_WRITE_FIO_FLAG(C) -BFIN_WRITE_FIO_FLAG(S) -BFIN_WRITE_FIO_FLAG(T) - -#define BFIN_READ_FIO_FLAG(name) \ -static inline u16 bfin_read_FIO_FLAG_##name(void) \ -{ \ - unsigned long flags; \ - u16 ret; \ - local_irq_save_hw(flags); \ - ret = bfin_read16(FIO_FLAG_##name); \ - bfin_read_CHIPID(); \ - local_irq_restore_hw(flags); \ - return ret; \ -} -BFIN_READ_FIO_FLAG(D) -BFIN_READ_FIO_FLAG(C) -BFIN_READ_FIO_FLAG(S) -BFIN_READ_FIO_FLAG(T) - -#else -#define bfin_write_FIO_FLAG_D(val) bfin_write16(FIO_FLAG_D, val) -#define bfin_write_FIO_FLAG_C(val) bfin_write16(FIO_FLAG_C, val) -#define bfin_write_FIO_FLAG_S(val) bfin_write16(FIO_FLAG_S, val) -#define bfin_write_FIO_FLAG_T(val) bfin_write16(FIO_FLAG_T, val) -#define bfin_read_FIO_FLAG_T() bfin_read16(FIO_FLAG_T) -#define bfin_read_FIO_FLAG_C() bfin_read16(FIO_FLAG_C) -#define bfin_read_FIO_FLAG_S() bfin_read16(FIO_FLAG_S) -#define bfin_read_FIO_FLAG_D() bfin_read16(FIO_FLAG_D) -#endif - -/* Writing to PLL_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_PLL_CTL(unsigned int val) -{ - unsigned long flags, iwr; - - if (val == bfin_read_PLL_CTL()) - return; - - local_irq_save_hw(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr = bfin_read32(SIC_IWR); - /* Only allow PPL Wakeup) */ - bfin_write32(SIC_IWR, IWR_ENABLE(0)); - - bfin_write16(PLL_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SIC_IWR, iwr); - local_irq_restore_hw(flags); -} - -/* Writing to VR_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_VR_CTL(unsigned int val) -{ - unsigned long flags, iwr; - - if (val == bfin_read_VR_CTL()) - return; - - local_irq_save_hw(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr = bfin_read32(SIC_IWR); - /* Only allow PPL Wakeup) */ - bfin_write32(SIC_IWR, IWR_ENABLE(0)); - - bfin_write16(VR_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SIC_IWR, iwr); - local_irq_restore_hw(flags); -} - #endif /* _CDEF_BF532_H */ diff --git a/arch/blackfin/mach-bf533/include/mach/defBF532.h b/arch/blackfin/mach-bf533/include/mach/defBF532.h index 04acf1ed10f9..3adb0b44e597 100644 --- a/arch/blackfin/mach-bf533/include/mach/defBF532.h +++ b/arch/blackfin/mach-bf533/include/mach/defBF532.h @@ -681,76 +681,6 @@ #define PF14_P 14 #define PF15_P 15 -/* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS **************** */ - -/* SPI_CTL Masks */ -#define TIMOD 0x00000003 /* Transfer initiation mode and interrupt generation */ -#define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */ -#define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */ -#define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */ -#define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */ -#define SZ 0x00000004 /* Send Zero (=0) or last (=1) word when TDBR empty. */ -#define GM 0x00000008 /* When RDBR full, get more (=1) data or discard (=0) incoming Data */ -#define PSSE 0x00000010 /* Enable (=1) Slave-Select input for Master. */ -#define EMISO 0x00000020 /* Enable (=1) MISO pin as an output. */ -#define SIZE 0x00000100 /* Word length (0 => 8 bits, 1 => 16 bits) */ -#define LSBF 0x00000200 /* Data format (0 => MSB sent/received first 1 => LSB sent/received first) */ -#define CPHA 0x00000400 /* Clock phase (0 => SPICLK starts toggling in middle of xfer, 1 => SPICLK toggles at the beginning of xfer. */ -#define CPOL 0x00000800 /* Clock polarity (0 => active-high, 1 => active-low) */ -#define MSTR 0x00001000 /* Configures SPI as master (=1) or slave (=0) */ -#define WOM 0x00002000 /* Open drain (=1) data output enable (for MOSI and MISO) */ -#define SPE 0x00004000 /* SPI module enable (=1), disable (=0) */ - -/* SPI_FLG Masks */ -#define FLS1 0x00000002 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */ -#define FLS2 0x00000004 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */ -#define FLS3 0x00000008 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */ -#define FLS4 0x00000010 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */ -#define FLS5 0x00000020 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */ -#define FLS6 0x00000040 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */ -#define FLS7 0x00000080 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */ -#define FLG1 0x00000200 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */ -#define FLG2 0x00000400 /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */ -#define FLG3 0x00000800 /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */ -#define FLG4 0x00001000 /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */ -#define FLG5 0x00002000 /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */ -#define FLG6 0x00004000 /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */ -#define FLG7 0x00008000 /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */ - -/* SPI_FLG Bit Positions */ -#define FLS1_P 0x00000001 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */ -#define FLS2_P 0x00000002 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */ -#define FLS3_P 0x00000003 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */ -#define FLS4_P 0x00000004 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */ -#define FLS5_P 0x00000005 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */ -#define FLS6_P 0x00000006 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */ -#define FLS7_P 0x00000007 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */ -#define FLG1_P 0x00000009 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */ -#define FLG2_P 0x0000000A /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */ -#define FLG3_P 0x0000000B /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */ -#define FLG4_P 0x0000000C /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */ -#define FLG5_P 0x0000000D /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */ -#define FLG6_P 0x0000000E /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */ -#define FLG7_P 0x0000000F /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */ - -/* SPI_STAT Masks */ -#define SPIF 0x00000001 /* Set (=1) when SPI single-word transfer complete */ -#define MODF 0x00000002 /* Set (=1) in a master device when some other device tries to become master */ -#define TXE 0x00000004 /* Set (=1) when transmission occurs with no new data in SPI_TDBR */ -#define TXS 0x00000008 /* SPI_TDBR Data Buffer Status (0=Empty, 1=Full) */ -#define RBSY 0x00000010 /* Set (=1) when data is received with RDBR full */ -#define RXS 0x00000020 /* SPI_RDBR Data Buffer Status (0=Empty, 1=Full) */ -#define TXCOL 0x00000040 /* When set (=1), corrupt data may have been transmitted */ - -/* SPIx_FLG Masks */ -#define FLG1E 0xFDFF /* Activates SPI_FLOUT1 */ -#define FLG2E 0xFBFF /* Activates SPI_FLOUT2 */ -#define FLG3E 0xF7FF /* Activates SPI_FLOUT3 */ -#define FLG4E 0xEFFF /* Activates SPI_FLOUT4 */ -#define FLG5E 0xDFFF /* Activates SPI_FLOUT5 */ -#define FLG6E 0xBFFF /* Activates SPI_FLOUT6 */ -#define FLG7E 0x7FFF /* Activates SPI_FLOUT7 */ - /* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS ************* */ /* AMGCTL Masks */ diff --git a/arch/blackfin/mach-bf533/include/mach/fio_flag.h b/arch/blackfin/mach-bf533/include/mach/fio_flag.h new file mode 100644 index 000000000000..d0bfba0b083b --- /dev/null +++ b/arch/blackfin/mach-bf533/include/mach/fio_flag.h @@ -0,0 +1,55 @@ +/* + * Copyright 2005-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later + */ + +#ifndef _MACH_FIO_FLAG_H +#define _MACH_FIO_FLAG_H + +#include <asm/blackfin.h> +#include <asm/irqflags.h> + +#if ANOMALY_05000311 +#define BFIN_WRITE_FIO_FLAG(name) \ +static inline void bfin_write_FIO_FLAG_##name(unsigned short val) \ +{ \ + unsigned long flags; \ + flags = hard_local_irq_save(); \ + bfin_write16(FIO_FLAG_##name, val); \ + bfin_read_CHIPID(); \ + hard_local_irq_restore(flags); \ +} +BFIN_WRITE_FIO_FLAG(D) +BFIN_WRITE_FIO_FLAG(C) +BFIN_WRITE_FIO_FLAG(S) +BFIN_WRITE_FIO_FLAG(T) + +#define BFIN_READ_FIO_FLAG(name) \ +static inline u16 bfin_read_FIO_FLAG_##name(void) \ +{ \ + unsigned long flags; \ + u16 ret; \ + flags = hard_local_irq_save(); \ + ret = bfin_read16(FIO_FLAG_##name); \ + bfin_read_CHIPID(); \ + hard_local_irq_restore(flags); \ + return ret; \ +} +BFIN_READ_FIO_FLAG(D) +BFIN_READ_FIO_FLAG(C) +BFIN_READ_FIO_FLAG(S) +BFIN_READ_FIO_FLAG(T) + +#else +#define bfin_write_FIO_FLAG_D(val) bfin_write16(FIO_FLAG_D, val) +#define bfin_write_FIO_FLAG_C(val) bfin_write16(FIO_FLAG_C, val) +#define bfin_write_FIO_FLAG_S(val) bfin_write16(FIO_FLAG_S, val) +#define bfin_write_FIO_FLAG_T(val) bfin_write16(FIO_FLAG_T, val) +#define bfin_read_FIO_FLAG_T() bfin_read16(FIO_FLAG_T) +#define bfin_read_FIO_FLAG_C() bfin_read16(FIO_FLAG_C) +#define bfin_read_FIO_FLAG_S() bfin_read16(FIO_FLAG_S) +#define bfin_read_FIO_FLAG_D() bfin_read16(FIO_FLAG_D) +#endif + +#endif /* _MACH_FIO_FLAG_H */ diff --git a/arch/blackfin/mach-bf533/include/mach/pll.h b/arch/blackfin/mach-bf533/include/mach/pll.h new file mode 100644 index 000000000000..169c106d0edb --- /dev/null +++ b/arch/blackfin/mach-bf533/include/mach/pll.h @@ -0,0 +1,57 @@ +/* + * Copyright 2005-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later + */ + +#ifndef _MACH_PLL_H +#define _MACH_PLL_H + +#include <asm/blackfin.h> +#include <asm/irqflags.h> + +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr; + + if (val == bfin_read_PLL_CTL()) + return; + + flags = hard_local_irq_save(); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr = bfin_read32(SIC_IWR); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR, IWR_ENABLE(0)); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR, iwr); + hard_local_irq_restore(flags); +} + +/* Writing to VR_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_VR_CTL(unsigned int val) +{ + unsigned long flags, iwr; + + if (val == bfin_read_VR_CTL()) + return; + + flags = hard_local_irq_save(); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr = bfin_read32(SIC_IWR); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR, IWR_ENABLE(0)); + + bfin_write16(VR_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR, iwr); + hard_local_irq_restore(flags); +} + +#endif /* _MACH_PLL_H */ |