diff options
Diffstat (limited to 'arch/m32r/include/asm/uaccess.h')
| -rw-r--r-- | arch/m32r/include/asm/uaccess.h | 515 |
1 files changed, 0 insertions, 515 deletions
diff --git a/arch/m32r/include/asm/uaccess.h b/arch/m32r/include/asm/uaccess.h deleted file mode 100644 index 9d89bc3d8181..000000000000 --- a/arch/m32r/include/asm/uaccess.h +++ /dev/null @@ -1,515 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_M32R_UACCESS_H -#define _ASM_M32R_UACCESS_H - -/* - * linux/include/asm-m32r/uaccess.h - * - * M32R version. - * Copyright (C) 2004, 2006 Hirokazu Takata <takata at linux-m32r.org> - */ - -/* - * User space memory access functions - */ -#include <asm/page.h> -#include <asm/setup.h> -#include <linux/prefetch.h> - -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons, these macros are grossly misnamed. - */ - -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) - -#ifdef CONFIG_MMU - -#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF) -#define USER_DS MAKE_MM_SEG(PAGE_OFFSET) -#define get_ds() (KERNEL_DS) -#define get_fs() (current_thread_info()->addr_limit) -#define set_fs(x) (current_thread_info()->addr_limit = (x)) - -#else /* not CONFIG_MMU */ - -#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF) -#define USER_DS MAKE_MM_SEG(0xFFFFFFFF) -#define get_ds() (KERNEL_DS) - -static inline mm_segment_t get_fs(void) -{ - return USER_DS; -} - -static inline void set_fs(mm_segment_t s) -{ -} - -#endif /* not CONFIG_MMU */ - -#define segment_eq(a, b) ((a).seg == (b).seg) - -#define __addr_ok(addr) \ - ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg)) - -/* - * Test whether a block of memory is a valid user space address. - * Returns 0 if the range is valid, nonzero otherwise. - * - * This is equivalent to the following test: - * (u33)addr + (u33)size >= (u33)current->addr_limit.seg - * - * This needs 33-bit arithmetic. We have a carry... - */ -#define __range_ok(addr, size) ({ \ - unsigned long flag, roksum; \ - __chk_user_ptr(addr); \ - asm ( \ - " cmpu %1, %1 ; clear cbit\n" \ - " addx %1, %3 ; set cbit if overflow\n" \ - " subx %0, %0\n" \ - " cmpu %4, %1\n" \ - " subx %0, %5\n" \ - : "=&r" (flag), "=r" (roksum) \ - : "1" (addr), "r" ((int)(size)), \ - "r" (current_thread_info()->addr_limit.seg), "r" (0) \ - : "cbit" ); \ - flag; }) - -/** - * access_ok: - Checks if a user space pointer is valid - * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE. Note that - * %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe - * to write to a block, it is always safe to read from it. - * @addr: User space pointer to start of block to check - * @size: Size of block to check - * - * Context: User context only. This function may sleep if pagefaults are - * enabled. - * - * Checks if a pointer to a block of memory in user space is valid. - * - * Returns true (nonzero) if the memory block may be valid, false (zero) - * if it is definitely invalid. - * - * Note that, depending on architecture, this function probably just - * checks that the pointer is in the user space range - after calling - * this function, memory access functions may still return -EFAULT. - */ -#ifdef CONFIG_MMU -#define access_ok(type, addr, size) (likely(__range_ok(addr, size) == 0)) -#else -static inline int access_ok(int type, const void *addr, unsigned long size) -{ - unsigned long val = (unsigned long)addr; - - return ((val >= memory_start) && ((val + size) < memory_end)); -} -#endif /* CONFIG_MMU */ - -#include <asm/extable.h> - -/* - * These are the main single-value transfer routines. They automatically - * use the right size if we just have the right pointer type. - * - * This gets kind of ugly. We want to return _two_ values in "get_user()" - * and yet we don't want to do any pointers, because that is too much - * of a performance impact. Thus we have a few rather ugly macros here, - * and hide all the uglyness from the user. - * - * The "__xxx" versions of the user access functions are versions that - * do not verify the address space, that must have been done previously - * with a separate "access_ok()" call (this is used when we do multiple - * accesses to the same area of user memory). - */ - -/* Careful: we have to cast the result to the type of the pointer for sign - reasons */ -/** - * get_user: - Get a simple variable from user space. - * @x: Variable to store result. - * @ptr: Source address, in user space. - * - * Context: User context only. This function may sleep if pagefaults are - * enabled. - * - * This macro copies a single simple variable from user space to kernel - * space. It supports simple types like char and int, but not larger - * data types like structures or arrays. - * - * @ptr must have pointer-to-simple-variable type, and the result of - * dereferencing @ptr must be assignable to @x without a cast. - * - * Returns zero on success, or -EFAULT on error. - * On error, the variable @x is set to zero. - */ -#define get_user(x, ptr) \ - __get_user_check((x), (ptr), sizeof(*(ptr))) - -/** - * put_user: - Write a simple value into user space. - * @x: Value to copy to user space. - * @ptr: Destination address, in user space. - * - * Context: User context only. This function may sleep if pagefaults are - * enabled. - * - * This macro copies a single simple value from kernel space to user - * space. It supports simple types like char and int, but not larger - * data types like structures or arrays. - * - * @ptr must have pointer-to-simple-variable type, and @x must be assignable - * to the result of dereferencing @ptr. - * - * Returns zero on success, or -EFAULT on error. - */ -#define put_user(x, ptr) \ - __put_user_check((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr))) - -/** - * __get_user: - Get a simple variable from user space, with less checking. - * @x: Variable to store result. - * @ptr: Source address, in user space. - * - * Context: User context only. This function may sleep if pagefaults are - * enabled. - * - * This macro copies a single simple variable from user space to kernel - * space. It supports simple types like char and int, but not larger - * data types like structures or arrays. - * - * @ptr must have pointer-to-simple-variable type, and the result of - * dereferencing @ptr must be assignable to @x without a cast. - * - * Caller must check the pointer with access_ok() before calling this - * function. - * - * Returns zero on success, or -EFAULT on error. - * On error, the variable @x is set to zero. - */ -#define __get_user(x, ptr) \ - __get_user_nocheck((x), (ptr), sizeof(*(ptr))) - -#define __get_user_nocheck(x, ptr, size) \ -({ \ - long __gu_err = 0; \ - unsigned long __gu_val = 0; \ - might_fault(); \ - __get_user_size(__gu_val, (ptr), (size), __gu_err); \ - (x) = (__force __typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __get_user_check(x, ptr, size) \ -({ \ - long __gu_err = -EFAULT; \ - unsigned long __gu_val = 0; \ - const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ - might_fault(); \ - if (access_ok(VERIFY_READ, __gu_addr, size)) \ - __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ - (x) = (__force __typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -extern long __get_user_bad(void); - -#define __get_user_size(x, ptr, size, retval) \ -do { \ - retval = 0; \ - __chk_user_ptr(ptr); \ - switch (size) { \ - case 1: __get_user_asm(x, ptr, retval, "ub"); break; \ - case 2: __get_user_asm(x, ptr, retval, "uh"); break; \ - case 4: __get_user_asm(x, ptr, retval, ""); break; \ - default: (x) = __get_user_bad(); \ - } \ -} while (0) - -#define __get_user_asm(x, addr, err, itype) \ - __asm__ __volatile__( \ - " .fillinsn\n" \ - "1: ld"itype" %1,@%2\n" \ - " .fillinsn\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - " .balign 4\n" \ - "3: ldi %0,%3\n" \ - " seth r14,#high(2b)\n" \ - " or3 r14,r14,#low(2b)\n" \ - " jmp r14\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 1b,3b\n" \ - ".previous" \ - : "=&r" (err), "=&r" (x) \ - : "r" (addr), "i" (-EFAULT), "0" (err) \ - : "r14", "memory") - -/** - * __put_user: - Write a simple value into user space, with less checking. - * @x: Value to copy to user space. - * @ptr: Destination address, in user space. - * - * Context: User context only. This function may sleep if pagefaults are - * enabled. - * - * This macro copies a single simple value from kernel space to user - * space. It supports simple types like char and int, but not larger - * data types like structures or arrays. - * - * @ptr must have pointer-to-simple-variable type, and @x must be assignable - * to the result of dereferencing @ptr. - * - * Caller must check the pointer with access_ok() before calling this - * function. - * - * Returns zero on success, or -EFAULT on error. - */ -#define __put_user(x, ptr) \ - __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr))) - - -#define __put_user_nocheck(x, ptr, size) \ -({ \ - long __pu_err; \ - might_fault(); \ - __put_user_size((x), (ptr), (size), __pu_err); \ - __pu_err; \ -}) - - -#define __put_user_check(x, ptr, size) \ -({ \ - long __pu_err = -EFAULT; \ - __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ - might_fault(); \ - if (access_ok(VERIFY_WRITE, __pu_addr, size)) \ - __put_user_size((x), __pu_addr, (size), __pu_err); \ - __pu_err; \ -}) - -#if defined(__LITTLE_ENDIAN__) -#define __put_user_u64(x, addr, err) \ - __asm__ __volatile__( \ - " .fillinsn\n" \ - "1: st %L1,@%2\n" \ - " .fillinsn\n" \ - "2: st %H1,@(4,%2)\n" \ - " .fillinsn\n" \ - "3:\n" \ - ".section .fixup,\"ax\"\n" \ - " .balign 4\n" \ - "4: ldi %0,%3\n" \ - " seth r14,#high(3b)\n" \ - " or3 r14,r14,#low(3b)\n" \ - " jmp r14\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 1b,4b\n" \ - " .long 2b,4b\n" \ - ".previous" \ - : "=&r" (err) \ - : "r" (x), "r" (addr), "i" (-EFAULT), "0" (err) \ - : "r14", "memory") - -#elif defined(__BIG_ENDIAN__) -#define __put_user_u64(x, addr, err) \ - __asm__ __volatile__( \ - " .fillinsn\n" \ - "1: st %H1,@%2\n" \ - " .fillinsn\n" \ - "2: st %L1,@(4,%2)\n" \ - " .fillinsn\n" \ - "3:\n" \ - ".section .fixup,\"ax\"\n" \ - " .balign 4\n" \ - "4: ldi %0,%3\n" \ - " seth r14,#high(3b)\n" \ - " or3 r14,r14,#low(3b)\n" \ - " jmp r14\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 1b,4b\n" \ - " .long 2b,4b\n" \ - ".previous" \ - : "=&r" (err) \ - : "r" (x), "r" (addr), "i" (-EFAULT), "0" (err) \ - : "r14", "memory") -#else -#error no endian defined -#endif - -extern void __put_user_bad(void); - -#define __put_user_size(x, ptr, size, retval) \ -do { \ - retval = 0; \ - __chk_user_ptr(ptr); \ - switch (size) { \ - case 1: __put_user_asm(x, ptr, retval, "b"); break; \ - case 2: __put_user_asm(x, ptr, retval, "h"); break; \ - case 4: __put_user_asm(x, ptr, retval, ""); break; \ - case 8: __put_user_u64((__typeof__(*ptr))(x), ptr, retval); break;\ - default: __put_user_bad(); \ - } \ -} while (0) - -struct __large_struct { unsigned long buf[100]; }; -#define __m(x) (*(struct __large_struct *)(x)) - -/* - * Tell gcc we read from memory instead of writing: this is because - * we do not write to any memory gcc knows about, so there are no - * aliasing issues. - */ -#define __put_user_asm(x, addr, err, itype) \ - __asm__ __volatile__( \ - " .fillinsn\n" \ - "1: st"itype" %1,@%2\n" \ - " .fillinsn\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - " .balign 4\n" \ - "3: ldi %0,%3\n" \ - " seth r14,#high(2b)\n" \ - " or3 r14,r14,#low(2b)\n" \ - " jmp r14\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 1b,3b\n" \ - ".previous" \ - : "=&r" (err) \ - : "r" (x), "r" (addr), "i" (-EFAULT), "0" (err) \ - : "r14", "memory") - -/* - * Here we special-case 1, 2 and 4-byte copy_*_user invocations. On a fault - * we return the initial request size (1, 2 or 4), as copy_*_user should do. - * If a store crosses a page boundary and gets a fault, the m32r will not write - * anything, so this is accurate. - */ - -/* - * Copy To/From Userspace - */ - -/* Generic arbitrary sized copy. */ -/* Return the number of bytes NOT copied. */ -#define __copy_user(to, from, size) \ -do { \ - unsigned long __dst, __src, __c; \ - __asm__ __volatile__ ( \ - " mv r14, %0\n" \ - " or r14, %1\n" \ - " beq %0, %1, 9f\n" \ - " beqz %2, 9f\n" \ - " and3 r14, r14, #3\n" \ - " bnez r14, 2f\n" \ - " and3 %2, %2, #3\n" \ - " beqz %3, 2f\n" \ - " addi %0, #-4 ; word_copy \n" \ - " .fillinsn\n" \ - "0: ld r14, @%1+\n" \ - " addi %3, #-1\n" \ - " .fillinsn\n" \ - "1: st r14, @+%0\n" \ - " bnez %3, 0b\n" \ - " beqz %2, 9f\n" \ - " addi %0, #4\n" \ - " .fillinsn\n" \ - "2: ldb r14, @%1 ; byte_copy \n" \ - " .fillinsn\n" \ - "3: stb r14, @%0\n" \ - " addi %1, #1\n" \ - " addi %2, #-1\n" \ - " addi %0, #1\n" \ - " bnez %2, 2b\n" \ - " .fillinsn\n" \ - "9:\n" \ - ".section .fixup,\"ax\"\n" \ - " .balign 4\n" \ - "5: addi %3, #1\n" \ - " addi %1, #-4\n" \ - " .fillinsn\n" \ - "6: slli %3, #2\n" \ - " add %2, %3\n" \ - " addi %0, #4\n" \ - " .fillinsn\n" \ - "7: seth r14, #high(9b)\n" \ - " or3 r14, r14, #low(9b)\n" \ - " jmp r14\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 0b,6b\n" \ - " .long 1b,5b\n" \ - " .long 2b,9b\n" \ - " .long 3b,9b\n" \ - ".previous\n" \ - : "=&r" (__dst), "=&r" (__src), "=&r" (size), \ - "=&r" (__c) \ - : "0" (to), "1" (from), "2" (size), "3" (size / 4) \ - : "r14", "memory"); \ -} while (0) - -/* We let the __ versions of copy_from/to_user inline, because they're often - * used in fast paths and have only a small space overhead. - */ -static inline unsigned long -raw_copy_from_user(void *to, const void __user *from, unsigned long n) -{ - prefetchw(to); - __copy_user(to, from, n); - return n; -} - -static inline unsigned long -raw_copy_to_user(void __user *to, const void *from, unsigned long n) -{ - prefetch(from); - __copy_user(to, from, n); - return n; -} - -long __must_check strncpy_from_user(char *dst, const char __user *src, - long count); - -/** - * __clear_user: - Zero a block of memory in user space, with less checking. - * @to: Destination address, in user space. - * @n: Number of bytes to zero. - * - * Zero a block of memory in user space. Caller must check - * the specified block with access_ok() before calling this function. - * - * Returns number of bytes that could not be cleared. - * On success, this will be zero. - */ -unsigned long __clear_user(void __user *mem, unsigned long len); - -/** - * clear_user: - Zero a block of memory in user space. - * @to: Destination address, in user space. - * @n: Number of bytes to zero. - * - * Zero a block of memory in user space. Caller must check - * the specified block with access_ok() before calling this function. - * - * Returns number of bytes that could not be cleared. - * On success, this will be zero. - */ -unsigned long clear_user(void __user *mem, unsigned long len); - -long strnlen_user(const char __user *str, long n); - -#endif /* _ASM_M32R_UACCESS_H */ |