diff options
Diffstat (limited to 'arch/m68k/include')
23 files changed, 337 insertions, 188 deletions
diff --git a/arch/m68k/include/asm/atomic.h b/arch/m68k/include/asm/atomic.h index 4eba796c00d4..336e6173794f 100644 --- a/arch/m68k/include/asm/atomic.h +++ b/arch/m68k/include/asm/atomic.h @@ -2,7 +2,7 @@ #define __ARCH_M68K_ATOMIC__ #include <linux/types.h> -#include <asm/system.h> +#include <linux/irqflags.h> /* * Atomic operations that C can't guarantee us. Useful for diff --git a/arch/m68k/include/asm/barrier.h b/arch/m68k/include/asm/barrier.h new file mode 100644 index 000000000000..445ce22c23cb --- /dev/null +++ b/arch/m68k/include/asm/barrier.h @@ -0,0 +1,20 @@ +#ifndef _M68K_BARRIER_H +#define _M68K_BARRIER_H + +/* + * Force strict CPU ordering. + * Not really required on m68k... + */ +#define nop() do { asm volatile ("nop"); barrier(); } while (0) +#define mb() barrier() +#define rmb() barrier() +#define wmb() barrier() +#define read_barrier_depends() ((void)0) +#define set_mb(var, value) ({ (var) = (value); wmb(); }) + +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#define smp_read_barrier_depends() ((void)0) + +#endif /* _M68K_BARRIER_H */ diff --git a/arch/m68k/include/asm/system.h b/arch/m68k/include/asm/cmpxchg.h index 47b01f4726bc..5c81d0eae5cf 100644 --- a/arch/m68k/include/asm/system.h +++ b/arch/m68k/include/asm/cmpxchg.h @@ -1,73 +1,13 @@ -#ifndef _M68K_SYSTEM_H -#define _M68K_SYSTEM_H +#ifndef __ARCH_M68K_CMPXCHG__ +#define __ARCH_M68K_CMPXCHG__ -#include <linux/linkage.h> -#include <linux/kernel.h> #include <linux/irqflags.h> -#include <asm/segment.h> -#include <asm/entry.h> - -#ifdef __KERNEL__ - -/* - * switch_to(n) should switch tasks to task ptr, first checking that - * ptr isn't the current task, in which case it does nothing. This - * also clears the TS-flag if the task we switched to has used the - * math co-processor latest. - */ -/* - * switch_to() saves the extra registers, that are not saved - * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and - * a0-a1. Some of these are used by schedule() and its predecessors - * and so we might get see unexpected behaviors when a task returns - * with unexpected register values. - * - * syscall stores these registers itself and none of them are used - * by syscall after the function in the syscall has been called. - * - * Beware that resume now expects *next to be in d1 and the offset of - * tss to be in a1. This saves a few instructions as we no longer have - * to push them onto the stack and read them back right after. - * - * 02/17/96 - Jes Sorensen (jds@kom.auc.dk) - * - * Changed 96/09/19 by Andreas Schwab - * pass prev in a0, next in a1 - */ -asmlinkage void resume(void); -#define switch_to(prev,next,last) do { \ - register void *_prev __asm__ ("a0") = (prev); \ - register void *_next __asm__ ("a1") = (next); \ - register void *_last __asm__ ("d1"); \ - __asm__ __volatile__("jbsr resume" \ - : "=a" (_prev), "=a" (_next), "=d" (_last) \ - : "0" (_prev), "1" (_next) \ - : "d0", "d2", "d3", "d4", "d5"); \ - (last) = _last; \ -} while (0) - - -/* - * Force strict CPU ordering. - * Not really required on m68k... - */ -#define nop() do { asm volatile ("nop"); barrier(); } while (0) -#define mb() barrier() -#define rmb() barrier() -#define wmb() barrier() -#define read_barrier_depends() ((void)0) -#define set_mb(var, value) ({ (var) = (value); wmb(); }) - -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#define smp_read_barrier_depends() ((void)0) - -#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) struct __xchg_dummy { unsigned long a[100]; }; #define __xg(x) ((volatile struct __xchg_dummy *)(x)) +extern unsigned long __invalid_xchg_size(unsigned long, volatile void *, int); + #ifndef CONFIG_RMW_INSNS static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) { @@ -92,7 +32,8 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz x = tmp; break; default: - BUG(); + tmp = __invalid_xchg_size(x, ptr, size); + break; } local_irq_restore(flags); @@ -102,7 +43,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) { switch (size) { - case 1: + case 1: __asm__ __volatile__ ("moveb %2,%0\n\t" "1:\n\t" @@ -110,7 +51,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz "jne 1b" : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); break; - case 2: + case 2: __asm__ __volatile__ ("movew %2,%0\n\t" "1:\n\t" @@ -118,7 +59,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz "jne 1b" : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); break; - case 4: + case 4: __asm__ __volatile__ ("movel %2,%0\n\t" "1:\n\t" @@ -126,15 +67,23 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz "jne 1b" : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); break; + default: + x = __invalid_xchg_size(x, ptr, size); + break; } return x; } #endif +#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) + #include <asm-generic/cmpxchg-local.h> #define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) +extern unsigned long __invalid_cmpxchg_size(volatile void *, + unsigned long, unsigned long, int); + /* * Atomic compare and exchange. Compare OLD with MEM, if identical, * store NEW in MEM. Return the initial value in MEM. Success is @@ -162,6 +111,9 @@ static inline unsigned long __cmpxchg(volatile void *p, unsigned long old, : "=d" (old), "=m" (*(int *)p) : "d" (new), "0" (old), "m" (*(int *)p)); break; + default: + old = __invalid_cmpxchg_size(p, old, new, size); + break; } return old; } @@ -186,8 +138,4 @@ static inline unsigned long __cmpxchg(volatile void *p, unsigned long old, #endif -#define arch_align_stack(x) (x) - -#endif /* __KERNEL__ */ - -#endif /* _M68K_SYSTEM_H */ +#endif /* __ARCH_M68K_CMPXCHG__ */ diff --git a/arch/m68k/include/asm/exec.h b/arch/m68k/include/asm/exec.h new file mode 100644 index 000000000000..0499adf90230 --- /dev/null +++ b/arch/m68k/include/asm/exec.h @@ -0,0 +1,6 @@ +#ifndef _M68K_EXEC_H +#define _M68K_EXEC_H + +#define arch_align_stack(x) (x) + +#endif /* _M68K_EXEC_H */ diff --git a/arch/m68k/include/asm/m5206sim.h b/arch/m68k/include/asm/m5206sim.h index 9015eadd5c00..69722366b084 100644 --- a/arch/m68k/include/asm/m5206sim.h +++ b/arch/m68k/include/asm/m5206sim.h @@ -100,11 +100,11 @@ #define MCFDMA_BASE1 (MCF_MBAR + 0x240) /* Base address DMA 1 */ #if defined(CONFIG_NETtel) -#define MCFUART_BASE1 0x180 /* Base address of UART1 */ -#define MCFUART_BASE2 0x140 /* Base address of UART2 */ +#define MCFUART_BASE0 (MCF_MBAR + 0x180) /* Base address UART0 */ +#define MCFUART_BASE1 (MCF_MBAR + 0x140) /* Base address UART1 */ #else -#define MCFUART_BASE1 0x140 /* Base address of UART1 */ -#define MCFUART_BASE2 0x180 /* Base address of UART2 */ +#define MCFUART_BASE0 (MCF_MBAR + 0x140) /* Base address UART0 */ +#define MCFUART_BASE1 (MCF_MBAR + 0x180) /* Base address UART1 */ #endif /* @@ -112,6 +112,8 @@ */ #define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ #define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ +#define MCF_IRQ_UART0 73 /* UART0 */ +#define MCF_IRQ_UART1 74 /* UART1 */ /* * Generic GPIO diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h index eda62de7e607..17f2aab9cf97 100644 --- a/arch/m68k/include/asm/m520xsim.h +++ b/arch/m68k/include/asm/m520xsim.h @@ -48,8 +48,21 @@ #define MCFINT_UART1 27 /* Interrupt number for UART1 */ #define MCFINT_UART2 28 /* Interrupt number for UART2 */ #define MCFINT_QSPI 31 /* Interrupt number for QSPI */ +#define MCFINT_FECRX0 36 /* Interrupt number for FEC RX */ +#define MCFINT_FECTX0 40 /* Interrupt number for FEC RX */ +#define MCFINT_FECENTC0 42 /* Interrupt number for FEC RX */ #define MCFINT_PIT1 4 /* Interrupt number for PIT1 (PIT0 in processor) */ +#define MCF_IRQ_UART0 (MCFINT_VECBASE + MCFINT_UART0) +#define MCF_IRQ_UART1 (MCFINT_VECBASE + MCFINT_UART1) +#define MCF_IRQ_UART2 (MCFINT_VECBASE + MCFINT_UART2) + +#define MCF_IRQ_FECRX0 (MCFINT_VECBASE + MCFINT_FECRX0) +#define MCF_IRQ_FECTX0 (MCFINT_VECBASE + MCFINT_FECTX0) +#define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0) + +#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI) + /* * SDRAM configuration registers. */ @@ -144,15 +157,25 @@ /* * UART module. */ -#define MCFUART_BASE1 0xFC060000 /* Base address of UART1 */ -#define MCFUART_BASE2 0xFC064000 /* Base address of UART2 */ -#define MCFUART_BASE3 0xFC068000 /* Base address of UART2 */ +#define MCFUART_BASE0 0xFC060000 /* Base address of UART0 */ +#define MCFUART_BASE1 0xFC064000 /* Base address of UART1 */ +#define MCFUART_BASE2 0xFC068000 /* Base address of UART2 */ /* * FEC module. */ -#define MCFFEC_BASE 0xFC030000 /* Base of FEC ethernet */ -#define MCFFEC_SIZE 0x800 /* Register set size */ +#define MCFFEC_BASE0 0xFC030000 /* Base of FEC ethernet */ +#define MCFFEC_SIZE0 0x800 /* Register set size */ + +/* + * QSPI module. + */ +#define MCFQSPI_BASE 0xFC05C000 /* Base of QSPI module */ +#define MCFQSPI_SIZE 0x40 /* Register set size */ + +#define MCFQSPI_CS0 46 +#define MCFQSPI_CS1 47 +#define MCFQSPI_CS2 27 /* * Reset Control Unit. diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h index 6235921eca4e..075062d4eecd 100644 --- a/arch/m68k/include/asm/m523xsim.h +++ b/arch/m68k/include/asm/m523xsim.h @@ -35,8 +35,23 @@ #define MCFINT_VECBASE 64 /* Vector base number */ #define MCFINT_UART0 13 /* Interrupt number for UART0 */ -#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */ +#define MCFINT_UART1 14 /* Interrupt number for UART1 */ +#define MCFINT_UART2 15 /* Interrupt number for UART2 */ #define MCFINT_QSPI 18 /* Interrupt number for QSPI */ +#define MCFINT_FECRX0 23 /* Interrupt number for FEC */ +#define MCFINT_FECTX0 27 /* Interrupt number for FEC */ +#define MCFINT_FECENTC0 29 /* Interrupt number for FEC */ +#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */ + +#define MCF_IRQ_UART0 (MCFINT_VECBASE + MCFINT_UART0) +#define MCF_IRQ_UART1 (MCFINT_VECBASE + MCFINT_UART1) +#define MCF_IRQ_UART2 (MCFINT_VECBASE + MCFINT_UART2) + +#define MCF_IRQ_FECRX0 (MCFINT_VECBASE + MCFINT_FECRX0) +#define MCF_IRQ_FECTX0 (MCFINT_VECBASE + MCFINT_FECTX0) +#define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0) + +#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI) /* * SDRAM configuration registers. @@ -50,8 +65,8 @@ /* * Reset Control Unit (relative to IPSBAR). */ -#define MCF_RCR 0x110000 -#define MCF_RSR 0x110001 +#define MCF_RCR (MCF_IPSBAR + 0x110000) +#define MCF_RSR (MCF_IPSBAR + 0x110001) #define MCF_RCR_SWRESET 0x80 /* Software reset bit */ #define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */ @@ -59,15 +74,26 @@ /* * UART module. */ -#define MCFUART_BASE1 (MCF_IPSBAR + 0x200) -#define MCFUART_BASE2 (MCF_IPSBAR + 0x240) -#define MCFUART_BASE3 (MCF_IPSBAR + 0x280) +#define MCFUART_BASE0 (MCF_IPSBAR + 0x200) +#define MCFUART_BASE1 (MCF_IPSBAR + 0x240) +#define MCFUART_BASE2 (MCF_IPSBAR + 0x280) /* * FEC ethernet module. */ -#define MCFFEC_BASE (MCF_IPSBAR + 0x1000) -#define MCFFEC_SIZE 0x800 +#define MCFFEC_BASE0 (MCF_IPSBAR + 0x1000) +#define MCFFEC_SIZE0 0x800 + +/* + * QSPI module. + */ +#define MCFQSPI_BASE (MCF_IPSBAR + 0x340) +#define MCFQSPI_SIZE 0x40 + +#define MCFQSPI_CS0 91 +#define MCFQSPI_CS1 92 +#define MCFQSPI_CS2 103 +#define MCFQSPI_CS3 99 /* * GPIO module. diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h index 805714ca8d7d..7f0c2c3660fd 100644 --- a/arch/m68k/include/asm/m5249sim.h +++ b/arch/m68k/include/asm/m5249sim.h @@ -76,8 +76,19 @@ /* * UART module. */ -#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */ -#define MCFUART_BASE2 0x200 /* Base address of UART2 */ +#define MCFUART_BASE0 (MCF_MBAR + 0x1c0) /* Base address UART0 */ +#define MCFUART_BASE1 (MCF_MBAR + 0x200) /* Base address UART1 */ + +/* + * QSPI module. + */ +#define MCFQSPI_BASE (MCF_MBAR + 0x300) /* Base address QSPI */ +#define MCFQSPI_SIZE 0x40 /* Register set size */ + +#define MCFQSPI_CS0 29 +#define MCFQSPI_CS1 24 +#define MCFQSPI_CS2 21 +#define MCFQSPI_CS3 22 /* * DMA unit base addresses. @@ -108,6 +119,9 @@ #define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ #define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ +#define MCF_IRQ_UART0 73 /* UART0 */ +#define MCF_IRQ_UART1 74 /* UART1 */ + /* * General purpose IO registers (in MBAR2). */ diff --git a/arch/m68k/include/asm/m5272sim.h b/arch/m68k/include/asm/m5272sim.h index 759c2b07a994..a58f1760d858 100644 --- a/arch/m68k/include/asm/m5272sim.h +++ b/arch/m68k/include/asm/m5272sim.h @@ -68,8 +68,8 @@ #define MCFSIM_DCMR1 0x5c /* DRAM 1 Mask reg (r/w) */ #define MCFSIM_DCCR1 0x63 /* DRAM 1 Control reg (r/w) */ -#define MCFUART_BASE1 0x100 /* Base address of UART1 */ -#define MCFUART_BASE2 0x140 /* Base address of UART2 */ +#define MCFUART_BASE0 (MCF_MBAR + 0x100) /* Base address UART0 */ +#define MCFUART_BASE1 (MCF_MBAR + 0x140) /* Base address UART1 */ #define MCFSIM_PACNT (MCF_MBAR + 0x80) /* Port A Control (r/w) */ #define MCFSIM_PADDR (MCF_MBAR + 0x84) /* Port A Direction (r/w) */ @@ -88,6 +88,9 @@ #define MCFTIMER_BASE3 (MCF_MBAR + 0x240) /* Base address TIMER4 */ #define MCFTIMER_BASE4 (MCF_MBAR + 0x260) /* Base address TIMER3 */ +#define MCFFEC_BASE0 (MCF_MBAR + 0x840) /* Base FEC ethernet */ +#define MCFFEC_SIZE0 0x1d0 + /* * Define system peripheral IRQ usage. */ @@ -101,8 +104,8 @@ #define MCF_IRQ_TIMER2 70 /* Timer 2 */ #define MCF_IRQ_TIMER3 71 /* Timer 3 */ #define MCF_IRQ_TIMER4 72 /* Timer 4 */ -#define MCF_IRQ_UART1 73 /* UART 1 */ -#define MCF_IRQ_UART2 74 /* UART 2 */ +#define MCF_IRQ_UART0 73 /* UART 0 */ +#define MCF_IRQ_UART1 74 /* UART 1 */ #define MCF_IRQ_PLIP 75 /* PLIC 2Khz Periodic */ #define MCF_IRQ_PLIA 76 /* PLIC Asynchronous */ #define MCF_IRQ_USB0 77 /* USB Endpoint 0 */ @@ -114,9 +117,9 @@ #define MCF_IRQ_USB6 83 /* USB Endpoint 6 */ #define MCF_IRQ_USB7 84 /* USB Endpoint 7 */ #define MCF_IRQ_DMA 85 /* DMA Controller */ -#define MCF_IRQ_ERX 86 /* Ethernet Receiver */ -#define MCF_IRQ_ETX 87 /* Ethernet Transmitter */ -#define MCF_IRQ_ENTC 88 /* Ethernet Non-Time Critical */ +#define MCF_IRQ_FECRX0 86 /* Ethernet Receiver */ +#define MCF_IRQ_FECTX0 87 /* Ethernet Transmitter */ +#define MCF_IRQ_FECENTC0 88 /* Ethernet Non-Time Critical */ #define MCF_IRQ_QSPI 89 /* Queued Serial Interface */ #define MCF_IRQ_EINT5 90 /* External Interrupt 5 */ #define MCF_IRQ_EINT6 91 /* External Interrupt 6 */ diff --git a/arch/m68k/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h index 758810ef91ec..83db8106f50a 100644 --- a/arch/m68k/include/asm/m527xsim.h +++ b/arch/m68k/include/asm/m527xsim.h @@ -38,8 +38,29 @@ #define MCFINT_UART1 14 /* Interrupt number for UART1 */ #define MCFINT_UART2 15 /* Interrupt number for UART2 */ #define MCFINT_QSPI 18 /* Interrupt number for QSPI */ +#define MCFINT_FECRX0 23 /* Interrupt number for FEC0 */ +#define MCFINT_FECTX0 27 /* Interrupt number for FEC0 */ +#define MCFINT_FECENTC0 29 /* Interrupt number for FEC0 */ #define MCFINT_PIT1 36 /* Interrupt number for PIT1 */ +#define MCFINT2_VECBASE 128 /* Vector base number 2 */ +#define MCFINT2_FECRX1 23 /* Interrupt number for FEC1 */ +#define MCFINT2_FECTX1 27 /* Interrupt number for FEC1 */ +#define MCFINT2_FECENTC1 29 /* Interrupt number for FEC1 */ + +#define MCF_IRQ_UART0 (MCFINT_VECBASE + MCFINT_UART0) +#define MCF_IRQ_UART1 (MCFINT_VECBASE + MCFINT_UART1) +#define MCF_IRQ_UART2 (MCFINT_VECBASE + MCFINT_UART2) + +#define MCF_IRQ_FECRX0 (MCFINT_VECBASE + MCFINT_FECRX0) +#define MCF_IRQ_FECTX0 (MCFINT_VECBASE + MCFINT_FECTX0) +#define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0) +#define MCF_IRQ_FECRX1 (MCFINT2_VECBASE + MCFINT2_FECRX1) +#define MCF_IRQ_FECTX1 (MCFINT2_VECBASE + MCFINT2_FECTX1) +#define MCF_IRQ_FECENTC1 (MCFINT2_VECBASE + MCFINT2_FECENTC1) + +#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI) + /* * SDRAM configuration registers. */ @@ -72,9 +93,9 @@ /* * UART module. */ -#define MCFUART_BASE1 (MCF_IPSBAR + 0x200) -#define MCFUART_BASE2 (MCF_IPSBAR + 0x240) -#define MCFUART_BASE3 (MCF_IPSBAR + 0x280) +#define MCFUART_BASE0 (MCF_IPSBAR + 0x200) +#define MCFUART_BASE1 (MCF_IPSBAR + 0x240) +#define MCFUART_BASE2 (MCF_IPSBAR + 0x280) /* * FEC ethernet module. @@ -84,6 +105,28 @@ #define MCFFEC_BASE1 (MCF_IPSBAR + 0x1800) #define MCFFEC_SIZE1 0x800 +/* + * QSPI module. + */ +#define MCFQSPI_BASE (MCF_IPSBAR + 0x340) +#define MCFQSPI_SIZE 0x40 + +#ifdef CONFIG_M5271 +#define MCFQSPI_CS0 91 +#define MCFQSPI_CS1 92 +#define MCFQSPI_CS2 99 +#define MCFQSPI_CS3 103 +#endif +#ifdef CONFIG_M5275 +#define MCFQSPI_CS0 59 +#define MCFQSPI_CS1 60 +#define MCFQSPI_CS2 61 +#define MCFQSPI_CS3 62 +#endif + +/* + * GPIO module. + */ #ifdef CONFIG_M5271 #define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100000) #define MCFGPIO_PODR_DATAH (MCF_IPSBAR + 0x100001) @@ -285,8 +328,8 @@ /* * Reset Control Unit (relative to IPSBAR). */ -#define MCF_RCR 0x110000 -#define MCF_RSR 0x110001 +#define MCF_RCR (MCF_IPSBAR + 0x110000) +#define MCF_RSR (MCF_IPSBAR + 0x110001) #define MCF_RCR_SWRESET 0x80 /* Software reset bit */ #define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */ diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h index d798bd5df56c..569476fba18c 100644 --- a/arch/m68k/include/asm/m528xsim.h +++ b/arch/m68k/include/asm/m528xsim.h @@ -35,9 +35,24 @@ #define MCFINT_VECBASE 64 /* Vector base number */ #define MCFINT_UART0 13 /* Interrupt number for UART0 */ +#define MCFINT_UART1 14 /* Interrupt number for UART1 */ +#define MCFINT_UART2 15 /* Interrupt number for UART2 */ #define MCFINT_QSPI 18 /* Interrupt number for QSPI */ +#define MCFINT_FECRX0 23 /* Interrupt number for FEC */ +#define MCFINT_FECTX0 27 /* Interrupt number for FEC */ +#define MCFINT_FECENTC0 29 /* Interrupt number for FEC */ #define MCFINT_PIT1 55 /* Interrupt number for PIT1 */ +#define MCF_IRQ_UART0 (MCFINT_VECBASE + MCFINT_UART0) +#define MCF_IRQ_UART1 (MCFINT_VECBASE + MCFINT_UART1) +#define MCF_IRQ_UART2 (MCFINT_VECBASE + MCFINT_UART2) + +#define MCF_IRQ_FECRX0 (MCFINT_VECBASE + MCFINT_FECRX0) +#define MCF_IRQ_FECTX0 (MCFINT_VECBASE + MCFINT_FECTX0) +#define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0) + +#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI) + /* * SDRAM configuration registers. */ @@ -58,15 +73,26 @@ /* * UART module. */ -#define MCFUART_BASE1 (MCF_IPSBAR + 0x00000200) -#define MCFUART_BASE2 (MCF_IPSBAR + 0x00000240) -#define MCFUART_BASE3 (MCF_IPSBAR + 0x00000280) +#define MCFUART_BASE0 (MCF_IPSBAR + 0x00000200) +#define MCFUART_BASE1 (MCF_IPSBAR + 0x00000240) +#define MCFUART_BASE2 (MCF_IPSBAR + 0x00000280) /* * FEC ethernet module. */ -#define MCFFEC_BASE (MCF_IPSBAR + 0x00001000) -#define MCFFEC_SIZE 0x800 +#define MCFFEC_BASE0 (MCF_IPSBAR + 0x00001000) +#define MCFFEC_SIZE0 0x800 + +/* + * QSPI module. + */ +#define MCFQSPI_IOBASE (MCF_IPSBAR + 0x340) +#define MCFQSPI_SIZE 0x40 + +#define MCFQSPI_CS0 147 +#define MCFQSPI_CS1 148 +#define MCFQSPI_CS2 149 +#define MCFQSPI_CS3 150 /* * GPIO registers @@ -246,8 +272,8 @@ /* * Reset Control Unit (relative to IPSBAR). */ -#define MCF_RCR 0x110000 -#define MCF_RSR 0x110001 +#define MCF_RCR (MCF_IPSBAR + 0x110000) +#define MCF_RSR (MCF_IPSBAR + 0x110001) #define MCF_RCR_SWRESET 0x80 /* Software reset bit */ #define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */ diff --git a/arch/m68k/include/asm/m5307sim.h b/arch/m68k/include/asm/m5307sim.h index 8f8609fcc9b8..3bc3adaa7ee0 100644 --- a/arch/m68k/include/asm/m5307sim.h +++ b/arch/m68k/include/asm/m5307sim.h @@ -117,11 +117,11 @@ * UART module. */ #if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3) -#define MCFUART_BASE1 0x200 /* Base address of UART1 */ -#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */ +#define MCFUART_BASE0 (MCF_MBAR + 0x200) /* Base address UART0 */ +#define MCFUART_BASE1 (MCF_MBAR + 0x1c0) /* Base address UART1 */ #else -#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */ -#define MCFUART_BASE2 0x200 /* Base address of UART2 */ +#define MCFUART_BASE0 (MCF_MBAR + 0x1c0) /* Base address UART0 */ +#define MCFUART_BASE1 (MCF_MBAR + 0x200) /* Base address UART1 */ #endif /* @@ -176,6 +176,8 @@ */ #define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ #define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ +#define MCF_IRQ_UART0 73 /* UART0 */ +#define MCF_IRQ_UART1 74 /* UART1 */ /****************************************************************************/ #endif /* m5307sim_h */ diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h index ba4cc784f574..29b66e21413a 100644 --- a/arch/m68k/include/asm/m532xsim.h +++ b/arch/m68k/include/asm/m532xsim.h @@ -24,6 +24,19 @@ #define MCFINT_UART1 27 /* Interrupt number for UART1 */ #define MCFINT_UART2 28 /* Interrupt number for UART2 */ #define MCFINT_QSPI 31 /* Interrupt number for QSPI */ +#define MCFINT_FECRX0 36 /* Interrupt number for FEC */ +#define MCFINT_FECTX0 40 /* Interrupt number for FEC */ +#define MCFINT_FECENTC0 42 /* Interrupt number for FEC */ + +#define MCF_IRQ_UART0 (MCFINT_VECBASE + MCFINT_UART0) +#define MCF_IRQ_UART1 (MCFINT_VECBASE + MCFINT_UART1) +#define MCF_IRQ_UART2 (MCFINT_VECBASE + MCFINT_UART2) + +#define MCF_IRQ_FECRX0 (MCFINT_VECBASE + MCFINT_FECRX0) +#define MCF_IRQ_FECTX0 (MCFINT_VECBASE + MCFINT_FECTX0) +#define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0) + +#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI) #define MCF_WTM_WCR MCF_REG16(0xFC098000) @@ -82,9 +95,25 @@ /* * UART module. */ -#define MCFUART_BASE1 0xFC060000 /* Base address of UART1 */ -#define MCFUART_BASE2 0xFC064000 /* Base address of UART2 */ -#define MCFUART_BASE3 0xFC068000 /* Base address of UART3 */ +#define MCFUART_BASE0 0xFC060000 /* Base address of UART1 */ +#define MCFUART_BASE1 0xFC064000 /* Base address of UART2 */ +#define MCFUART_BASE2 0xFC068000 /* Base address of UART3 */ + +/* + * FEC module. + */ +#define MCFFEC_BASE0 0xFC030000 /* Base address of FEC0 */ +#define MCFFEC_SIZE0 0x800 /* Size of FEC0 region */ + +/* + * QSPI module. + */ +#define MCFQSPI_BASE 0xFC058000 /* Base address of QSPI */ +#define MCFQSPI_SIZE 0x40 /* Size of QSPI region */ + +#define MCFQSPI_CS0 84 +#define MCFQSPI_CS1 85 +#define MCFQSPI_CS2 86 /* * Timer module. diff --git a/arch/m68k/include/asm/m5407sim.h b/arch/m68k/include/asm/m5407sim.h index 51e00b00b8a6..79f58dd6a83d 100644 --- a/arch/m68k/include/asm/m5407sim.h +++ b/arch/m68k/include/asm/m5407sim.h @@ -85,8 +85,8 @@ #define MCFTIMER_BASE1 (MCF_MBAR + 0x140) /* Base of TIMER1 */ #define MCFTIMER_BASE2 (MCF_MBAR + 0x180) /* Base of TIMER2 */ -#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */ -#define MCFUART_BASE2 0x200 /* Base address of UART2 */ +#define MCFUART_BASE0 (MCF_MBAR + 0x1c0) /* Base address UART0 */ +#define MCFUART_BASE1 (MCF_MBAR + 0x200) /* Base address UART1 */ #define MCFSIM_PADDR (MCF_MBAR + 0x244) #define MCFSIM_PADAT (MCF_MBAR + 0x248) @@ -139,6 +139,8 @@ */ #define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ #define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ +#define MCF_IRQ_UART0 73 /* UART0 */ +#define MCF_IRQ_UART1 74 /* UART1 */ /****************************************************************************/ #endif /* m5407sim_h */ diff --git a/arch/m68k/include/asm/m54xxsim.h b/arch/m68k/include/asm/m54xxsim.h index 1ed8bfb02772..ae56b8848a9d 100644 --- a/arch/m68k/include/asm/m54xxsim.h +++ b/arch/m68k/include/asm/m54xxsim.h @@ -31,16 +31,20 @@ /* * UART module. */ -#define MCFUART_BASE1 0x8600 /* Base address of UART1 */ -#define MCFUART_BASE2 0x8700 /* Base address of UART2 */ -#define MCFUART_BASE3 0x8800 /* Base address of UART3 */ -#define MCFUART_BASE4 0x8900 /* Base address of UART4 */ +#define MCFUART_BASE0 (MCF_MBAR + 0x8600) /* Base address UART0 */ +#define MCFUART_BASE1 (MCF_MBAR + 0x8700) /* Base address UART1 */ +#define MCFUART_BASE2 (MCF_MBAR + 0x8800) /* Base address UART2 */ +#define MCFUART_BASE3 (MCF_MBAR + 0x8900) /* Base address UART3 */ /* * Define system peripheral IRQ usage. */ -#define MCF_IRQ_TIMER (64 + 54) /* Slice Timer 0 */ -#define MCF_IRQ_PROFILER (64 + 53) /* Slice Timer 1 */ +#define MCF_IRQ_TIMER (MCFINT_VECBASE + 54) /* Slice Timer 0 */ +#define MCF_IRQ_PROFILER (MCFINT_VECBASE + 53) /* Slice Timer 1 */ +#define MCF_IRQ_UART0 (MCFINT_VECBASE + 35) +#define MCF_IRQ_UART1 (MCFINT_VECBASE + 34) +#define MCF_IRQ_UART2 (MCFINT_VECBASE + 33) +#define MCF_IRQ_UART3 (MCFINT_VECBASE + 32) /* * Generic GPIO support diff --git a/arch/m68k/include/asm/machdep.h b/arch/m68k/include/asm/machdep.h index 789f3b2de0e9..825c1c813196 100644 --- a/arch/m68k/include/asm/machdep.h +++ b/arch/m68k/include/asm/machdep.h @@ -22,8 +22,6 @@ extern unsigned int (*mach_get_ss)(void); extern int (*mach_get_rtc_pll)(struct rtc_pll_info *); extern int (*mach_set_rtc_pll)(struct rtc_pll_info *); extern int (*mach_set_clock_mmss)(unsigned long); -extern void (*mach_gettod)(int *year, int *mon, int *day, int *hour, - int *min, int *sec); extern void (*mach_reset)( void ); extern void (*mach_halt)( void ); extern void (*mach_power_off)( void ); @@ -35,9 +33,8 @@ extern void (*mach_l2_flush) (int); extern void (*mach_beep) (unsigned int, unsigned int); /* Hardware clock functions */ -extern void hw_timer_init(void); +extern void hw_timer_init(irq_handler_t handler); extern unsigned long hw_timer_offset(void); -extern irqreturn_t arch_timer_interrupt(int irq, void *dummy); extern void config_BSP(char *command, int len); diff --git a/arch/m68k/include/asm/mcf_pgtable.h b/arch/m68k/include/asm/mcf_pgtable.h index 756bde4fb4f8..3c793682e5d9 100644 --- a/arch/m68k/include/asm/mcf_pgtable.h +++ b/arch/m68k/include/asm/mcf_pgtable.h @@ -78,7 +78,8 @@ | CF_PAGE_READABLE \ | CF_PAGE_WRITABLE \ | CF_PAGE_EXEC \ - | CF_PAGE_SYSTEM) + | CF_PAGE_SYSTEM \ + | CF_PAGE_SHARED) #define PAGE_COPY __pgprot(CF_PAGE_VALID \ | CF_PAGE_ACCESSED \ diff --git a/arch/m68k/include/asm/mcfqspi.h b/arch/m68k/include/asm/mcfqspi.h index 7fe631972f1f..7b51416ccae2 100644 --- a/arch/m68k/include/asm/mcfqspi.h +++ b/arch/m68k/include/asm/mcfqspi.h @@ -21,17 +21,6 @@ #ifndef mcfqspi_h #define mcfqspi_h -#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) -#define MCFQSPI_IOBASE (MCF_IPSBAR + 0x340) -#elif defined(CONFIG_M5249) -#define MCFQSPI_IOBASE (MCF_MBAR + 0x300) -#elif defined(CONFIG_M520x) -#define MCFQSPI_IOBASE 0xFC05C000 -#elif defined(CONFIG_M532x) -#define MCFQSPI_IOBASE 0xFC058000 -#endif -#define MCFQSPI_IOSIZE 0x40 - /** * struct mcfqspi_cs_control - chip select control for the coldfire qspi driver * @setup: setup the control; allocate gpio's, etc. May be NULL. diff --git a/arch/m68k/include/asm/mcfuart.h b/arch/m68k/include/asm/mcfuart.h index 2abedff0a694..2d3bc774b3c5 100644 --- a/arch/m68k/include/asm/mcfuart.h +++ b/arch/m68k/include/asm/mcfuart.h @@ -41,7 +41,10 @@ struct mcf_platform_uart { #define MCFUART_UTF 0x28 /* Transmitter FIFO (r/w) */ #define MCFUART_URF 0x2c /* Receiver FIFO (r/w) */ #define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */ -#else +#endif +#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \ + defined(CONFIG_M5249) || defined(CONFIG_M5307) || \ + defined(CONFIG_M5407) #define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */ #endif #define MCFUART_UIPR 0x34 /* Input Port (r) */ diff --git a/arch/m68k/include/asm/posix_types.h b/arch/m68k/include/asm/posix_types.h index 98d0970d9bad..6373093be72b 100644 --- a/arch/m68k/include/asm/posix_types.h +++ b/arch/m68k/include/asm/posix_types.h @@ -7,55 +7,22 @@ * assume GCC is being used. */ -typedef unsigned long __kernel_ino_t; typedef unsigned short __kernel_mode_t; +#define __kernel_mode_t __kernel_mode_t + typedef unsigned short __kernel_nlink_t; -typedef long __kernel_off_t; -typedef int __kernel_pid_t; +#define __kernel_nlink_t __kernel_nlink_t + typedef unsigned short __kernel_ipc_pid_t; +#define __kernel_ipc_pid_t __kernel_ipc_pid_t + typedef unsigned short __kernel_uid_t; typedef unsigned short __kernel_gid_t; -typedef unsigned int __kernel_size_t; -typedef int __kernel_ssize_t; -typedef int __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef int __kernel_daddr_t; -typedef char * __kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; - -typedef unsigned short __kernel_old_uid_t; -typedef unsigned short __kernel_old_gid_t; -typedef unsigned short __kernel_old_dev_t; - -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif +#define __kernel_uid_t __kernel_uid_t -typedef struct { - int val[2]; -} __kernel_fsid_t; - -#if defined(__KERNEL__) - -#undef __FD_SET -#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d)) - -#undef __FD_CLR -#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) - -#undef __FD_ISSET -#define __FD_ISSET(d, set) (!!((set)->fds_bits[__FDELT(d)] & __FDMASK(d))) - -#undef __FD_ZERO -#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp))) +typedef unsigned short __kernel_old_dev_t; +#define __kernel_old_dev_t __kernel_old_dev_t -#endif /* defined(__KERNEL__) */ +#include <asm-generic/posix_types.h> #endif diff --git a/arch/m68k/include/asm/socket.h b/arch/m68k/include/asm/socket.h index d4708ce466e0..d1be684edf97 100644 --- a/arch/m68k/include/asm/socket.h +++ b/arch/m68k/include/asm/socket.h @@ -64,5 +64,9 @@ #define SO_WIFI_STATUS 41 #define SCM_WIFI_STATUS SO_WIFI_STATUS +#define SO_PEEK_OFF 42 + +/* Instruct lower device to use last 4-bytes of skb data as FCS */ +#define SO_NOFCS 43 #endif /* _ASM_SOCKET_H */ diff --git a/arch/m68k/include/asm/sun3xflop.h b/arch/m68k/include/asm/sun3xflop.h index 32c45f84ac60..95231e2f9d64 100644 --- a/arch/m68k/include/asm/sun3xflop.h +++ b/arch/m68k/include/asm/sun3xflop.h @@ -11,7 +11,6 @@ #include <asm/page.h> #include <asm/pgtable.h> -#include <asm/system.h> #include <asm/irq.h> #include <asm/sun3x.h> diff --git a/arch/m68k/include/asm/switch_to.h b/arch/m68k/include/asm/switch_to.h new file mode 100644 index 000000000000..16fd6b634982 --- /dev/null +++ b/arch/m68k/include/asm/switch_to.h @@ -0,0 +1,41 @@ +#ifndef _M68K_SWITCH_TO_H +#define _M68K_SWITCH_TO_H + +/* + * switch_to(n) should switch tasks to task ptr, first checking that + * ptr isn't the current task, in which case it does nothing. This + * also clears the TS-flag if the task we switched to has used the + * math co-processor latest. + */ +/* + * switch_to() saves the extra registers, that are not saved + * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and + * a0-a1. Some of these are used by schedule() and its predecessors + * and so we might get see unexpected behaviors when a task returns + * with unexpected register values. + * + * syscall stores these registers itself and none of them are used + * by syscall after the function in the syscall has been called. + * + * Beware that resume now expects *next to be in d1 and the offset of + * tss to be in a1. This saves a few instructions as we no longer have + * to push them onto the stack and read them back right after. + * + * 02/17/96 - Jes Sorensen (jds@kom.auc.dk) + * + * Changed 96/09/19 by Andreas Schwab + * pass prev in a0, next in a1 + */ +asmlinkage void resume(void); +#define switch_to(prev,next,last) do { \ + register void *_prev __asm__ ("a0") = (prev); \ + register void *_next __asm__ ("a1") = (next); \ + register void *_last __asm__ ("d1"); \ + __asm__ __volatile__("jbsr resume" \ + : "=a" (_prev), "=a" (_next), "=d" (_last) \ + : "0" (_prev), "1" (_next) \ + : "d0", "d2", "d3", "d4", "d5"); \ + (last) = _last; \ +} while (0) + +#endif /* _M68K_SWITCH_TO_H */ |