1 files changed, 0 insertions, 125 deletions
diff --git a/arch/mips/include/asm/mach-powertv/asic_regs.h b/arch/mips/include/asm/mach-powertv/asic_regs.h
deleted file mode 100644
index 06712abb3e55..000000000000
--- a/arch/mips/include/asm/mach-powertv/asic_regs.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * Copyright (C) 2009  Cisco Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#ifndef __ASM_MACH_POWERTV_ASIC_H_
-#define __ASM_MACH_POWERTV_ASIC_H_
-#include <linux/io.h>
-
-/* ASIC types */
-enum asic_type {
-	ASIC_UNKNOWN,
-	ASIC_ZEUS,
-	ASIC_CALLIOPE,
-	ASIC_CRONUS,
-	ASIC_CRONUSLITE,
-	ASIC_GAIA,
-	ASICS			/* Number of supported ASICs */
-};
-
-/* hardcoded values read from Chip Version registers */
-#define CRONUS_10	0x0B4C1C20
-#define CRONUS_11	0x0B4C1C21
-#define CRONUSLITE_10	0x0B4C1C40
-
-#define NAND_FLASH_BASE		0x03000000
-#define CALLIOPE_IO_BASE	0x08000000
-#define GAIA_IO_BASE		0x09000000
-#define CRONUS_IO_BASE		0x09000000
-#define ZEUS_IO_BASE		0x09000000
-
-#define ASIC_IO_SIZE		0x01000000
-
-/* Definitions for backward compatibility */
-#define UART1_INTSTAT	uart1_intstat
-#define UART1_INTEN	uart1_inten
-#define UART1_CONFIG1	uart1_config1
-#define UART1_CONFIG2	uart1_config2
-#define UART1_DIVISORHI uart1_divisorhi
-#define UART1_DIVISORLO uart1_divisorlo
-#define UART1_DATA	uart1_data
-#define UART1_STATUS	uart1_status
-
-/* ASIC register enumeration */
-union register_map_entry {
-	unsigned long phys;
-	u32 *virt;
-};
-
-#define REGISTER_MAP_ELEMENT(x) union register_map_entry x;
-struct register_map {
-#include <asm/mach-powertv/asic_reg_map.h>
-};
-#undef REGISTER_MAP_ELEMENT
-
-/**
- * register_map_offset_phys - add an offset to the physical address
- * @map:	Pointer to the &struct register_map
- * @offset:	Value to add
- *
- * Only adds the base to non-zero physical addresses
- */
-static inline void register_map_offset_phys(struct register_map *map,
-	unsigned long offset)
-{
-#define REGISTER_MAP_ELEMENT(x)		do {				\
-		if (map->x.phys != 0)					\
-			map->x.phys += offset;				\
-	} while (false);
-
-#include <asm/mach-powertv/asic_reg_map.h>
-#undef REGISTER_MAP_ELEMENT
-}
-
-/**
- * register_map_virtualize - Convert &register_map to virtual addresses
- * @map:	Pointer to &register_map to virtualize
- */
-static inline void register_map_virtualize(struct register_map *map)
-{
-#define REGISTER_MAP_ELEMENT(x)		do {				\
-		map->x.virt = (!map->x.phys) ? NULL :			\
-			UNCAC_ADDR(phys_to_virt(map->x.phys));		\
-	} while (false);
-
-#include <asm/mach-powertv/asic_reg_map.h>
-#undef REGISTER_MAP_ELEMENT
-}
-
-extern struct register_map _asic_register_map;
-extern unsigned long asic_phy_base;
-
-/*
- * Macros to interface to registers through their ioremapped address
- * asic_reg_phys_addr	Returns the physical address of the given register
- * asic_reg_addr	Returns the iomapped virtual address of the given
- *			register.
- */
-#define asic_reg_addr(x)	(_asic_register_map.x.virt)
-#define asic_reg_phys_addr(x)	(virt_to_phys((void *) CAC_ADDR(	\
-					(unsigned long) asic_reg_addr(x))))
-
-/*
- * The asic_reg macro is gone. It should be replaced by either asic_read or
- * asic_write, as appropriate.
- */
-
-#define asic_read(x)		readl(asic_reg_addr(x))
-#define asic_write(v, x)	writel(v, asic_reg_addr(x))
-
-extern void asic_irq_init(void);
-#endif