diff options
Diffstat (limited to 'arch/mips/lib')
| -rw-r--r-- | arch/mips/lib/csum_partial.S | 160 |
1 files changed, 91 insertions, 69 deletions
diff --git a/arch/mips/lib/csum_partial.S b/arch/mips/lib/csum_partial.S index 5d73d0d704a3..bff5167b59a6 100644 --- a/arch/mips/lib/csum_partial.S +++ b/arch/mips/lib/csum_partial.S @@ -328,20 +328,39 @@ LEAF(csum_partial) * These handlers do not need to overwrite any data. */ -#define EXC(inst_reg,addr,handler) \ -9: inst_reg, addr; \ +/* Instruction type */ +#define LD_INSN 1 +#define ST_INSN 2 + +/* + * Wrapper to add an entry in the exception table + * in case the insn causes a memory exception. + * Arguments: + * insn : Load/store instruction + * type : Instruction type + * reg : Register + * addr : Address + * handler : Exception handler + */ +#define EXC(insn, type, reg, addr, handler) \ +9: insn reg, addr; \ .section __ex_table,"a"; \ PTR 9b, handler; \ .previous +#undef LOAD + #ifdef USE_DOUBLE -#define LOAD ld -#define LOADL ldl -#define LOADR ldr -#define STOREL sdl -#define STORER sdr -#define STORE sd +#define LOADK ld /* No exception */ +#define LOAD(reg, addr, handler) EXC(ld, LD_INSN, reg, addr, handler) +#define LOADBU(reg, addr, handler) EXC(lbu, LD_INSN, reg, addr, handler) +#define LOADL(reg, addr, handler) EXC(ldl, LD_INSN, reg, addr, handler) +#define LOADR(reg, addr, handler) EXC(ldr, LD_INSN, reg, addr, handler) +#define STOREB(reg, addr, handler) EXC(sb, ST_INSN, reg, addr, handler) +#define STOREL(reg, addr, handler) EXC(sdl, ST_INSN, reg, addr, handler) +#define STORER(reg, addr, handler) EXC(sdr, ST_INSN, reg, addr, handler) +#define STORE(reg, addr, handler) EXC(sd, ST_INSN, reg, addr, handler) #define ADD daddu #define SUB dsubu #define SRL dsrl @@ -353,12 +372,15 @@ LEAF(csum_partial) #else -#define LOAD lw -#define LOADL lwl -#define LOADR lwr -#define STOREL swl -#define STORER swr -#define STORE sw +#define LOADK lw /* No exception */ +#define LOAD(reg, addr, handler) EXC(lw, LD_INSN, reg, addr, handler) +#define LOADBU(reg, addr, handler) EXC(lbu, LD_INSN, reg, addr, handler) +#define LOADL(reg, addr, handler) EXC(lwl, LD_INSN, reg, addr, handler) +#define LOADR(reg, addr, handler) EXC(lwr, LD_INSN, reg, addr, handler) +#define STOREB(reg, addr, handler) EXC(sb, ST_INSN, reg, addr, handler) +#define STOREL(reg, addr, handler) EXC(swl, ST_INSN, reg, addr, handler) +#define STORER(reg, addr, handler) EXC(swr, ST_INSN, reg, addr, handler) +#define STORE(reg, addr, handler) EXC(sw, ST_INSN, reg, addr, handler) #define ADD addu #define SUB subu #define SRL srl @@ -439,31 +461,31 @@ FEXPORT(csum_partial_copy_nocheck) SUB len, 8*NBYTES # subtract here for bgez loop .align 4 1: -EXC( LOAD t0, UNIT(0)(src), .Ll_exc) -EXC( LOAD t1, UNIT(1)(src), .Ll_exc_copy) -EXC( LOAD t2, UNIT(2)(src), .Ll_exc_copy) -EXC( LOAD t3, UNIT(3)(src), .Ll_exc_copy) -EXC( LOAD t4, UNIT(4)(src), .Ll_exc_copy) -EXC( LOAD t5, UNIT(5)(src), .Ll_exc_copy) -EXC( LOAD t6, UNIT(6)(src), .Ll_exc_copy) -EXC( LOAD t7, UNIT(7)(src), .Ll_exc_copy) + LOAD(t0, UNIT(0)(src), .Ll_exc) + LOAD(t1, UNIT(1)(src), .Ll_exc_copy) + LOAD(t2, UNIT(2)(src), .Ll_exc_copy) + LOAD(t3, UNIT(3)(src), .Ll_exc_copy) + LOAD(t4, UNIT(4)(src), .Ll_exc_copy) + LOAD(t5, UNIT(5)(src), .Ll_exc_copy) + LOAD(t6, UNIT(6)(src), .Ll_exc_copy) + LOAD(t7, UNIT(7)(src), .Ll_exc_copy) SUB len, len, 8*NBYTES ADD src, src, 8*NBYTES -EXC( STORE t0, UNIT(0)(dst), .Ls_exc) + STORE(t0, UNIT(0)(dst), .Ls_exc) ADDC(sum, t0) -EXC( STORE t1, UNIT(1)(dst), .Ls_exc) + STORE(t1, UNIT(1)(dst), .Ls_exc) ADDC(sum, t1) -EXC( STORE t2, UNIT(2)(dst), .Ls_exc) + STORE(t2, UNIT(2)(dst), .Ls_exc) ADDC(sum, t2) -EXC( STORE t3, UNIT(3)(dst), .Ls_exc) + STORE(t3, UNIT(3)(dst), .Ls_exc) ADDC(sum, t3) -EXC( STORE t4, UNIT(4)(dst), .Ls_exc) + STORE(t4, UNIT(4)(dst), .Ls_exc) ADDC(sum, t4) -EXC( STORE t5, UNIT(5)(dst), .Ls_exc) + STORE(t5, UNIT(5)(dst), .Ls_exc) ADDC(sum, t5) -EXC( STORE t6, UNIT(6)(dst), .Ls_exc) + STORE(t6, UNIT(6)(dst), .Ls_exc) ADDC(sum, t6) -EXC( STORE t7, UNIT(7)(dst), .Ls_exc) + STORE(t7, UNIT(7)(dst), .Ls_exc) ADDC(sum, t7) .set reorder /* DADDI_WAR */ ADD dst, dst, 8*NBYTES @@ -483,19 +505,19 @@ EXC( STORE t7, UNIT(7)(dst), .Ls_exc) /* * len >= 4*NBYTES */ -EXC( LOAD t0, UNIT(0)(src), .Ll_exc) -EXC( LOAD t1, UNIT(1)(src), .Ll_exc_copy) -EXC( LOAD t2, UNIT(2)(src), .Ll_exc_copy) -EXC( LOAD t3, UNIT(3)(src), .Ll_exc_copy) + LOAD(t0, UNIT(0)(src), .Ll_exc) + LOAD(t1, UNIT(1)(src), .Ll_exc_copy) + LOAD(t2, UNIT(2)(src), .Ll_exc_copy) + LOAD(t3, UNIT(3)(src), .Ll_exc_copy) SUB len, len, 4*NBYTES ADD src, src, 4*NBYTES -EXC( STORE t0, UNIT(0)(dst), .Ls_exc) + STORE(t0, UNIT(0)(dst), .Ls_exc) ADDC(sum, t0) -EXC( STORE t1, UNIT(1)(dst), .Ls_exc) + STORE(t1, UNIT(1)(dst), .Ls_exc) ADDC(sum, t1) -EXC( STORE t2, UNIT(2)(dst), .Ls_exc) + STORE(t2, UNIT(2)(dst), .Ls_exc) ADDC(sum, t2) -EXC( STORE t3, UNIT(3)(dst), .Ls_exc) + STORE(t3, UNIT(3)(dst), .Ls_exc) ADDC(sum, t3) .set reorder /* DADDI_WAR */ ADD dst, dst, 4*NBYTES @@ -508,10 +530,10 @@ EXC( STORE t3, UNIT(3)(dst), .Ls_exc) beq rem, len, .Lcopy_bytes nop 1: -EXC( LOAD t0, 0(src), .Ll_exc) + LOAD(t0, 0(src), .Ll_exc) ADD src, src, NBYTES SUB len, len, NBYTES -EXC( STORE t0, 0(dst), .Ls_exc) + STORE(t0, 0(dst), .Ls_exc) ADDC(sum, t0) .set reorder /* DADDI_WAR */ ADD dst, dst, NBYTES @@ -534,10 +556,10 @@ EXC( STORE t0, 0(dst), .Ls_exc) ADD t1, dst, len # t1 is just past last byte of dst li bits, 8*NBYTES SLL rem, len, 3 # rem = number of bits to keep -EXC( LOAD t0, 0(src), .Ll_exc) + LOAD(t0, 0(src), .Ll_exc) SUB bits, bits, rem # bits = number of bits to discard SHIFT_DISCARD t0, t0, bits -EXC( STREST t0, -1(t1), .Ls_exc) + STREST(t0, -1(t1), .Ls_exc) SHIFT_DISCARD_REVERT t0, t0, bits .set reorder ADDC(sum, t0) @@ -554,12 +576,12 @@ EXC( STREST t0, -1(t1), .Ls_exc) * Set match = (src and dst have same alignment) */ #define match rem -EXC( LDFIRST t3, FIRST(0)(src), .Ll_exc) + LDFIRST(t3, FIRST(0)(src), .Ll_exc) ADD t2, zero, NBYTES -EXC( LDREST t3, REST(0)(src), .Ll_exc_copy) + LDREST(t3, REST(0)(src), .Ll_exc_copy) SUB t2, t2, t1 # t2 = number of bytes copied xor match, t0, t1 -EXC( STFIRST t3, FIRST(0)(dst), .Ls_exc) + STFIRST(t3, FIRST(0)(dst), .Ls_exc) SLL t4, t1, 3 # t4 = number of bits to discard SHIFT_DISCARD t3, t3, t4 /* no SHIFT_DISCARD_REVERT to handle odd buffer properly */ @@ -581,26 +603,26 @@ EXC( STFIRST t3, FIRST(0)(dst), .Ls_exc) * It's OK to load FIRST(N+1) before REST(N) because the two addresses * are to the same unit (unless src is aligned, but it's not). */ -EXC( LDFIRST t0, FIRST(0)(src), .Ll_exc) -EXC( LDFIRST t1, FIRST(1)(src), .Ll_exc_copy) + LDFIRST(t0, FIRST(0)(src), .Ll_exc) + LDFIRST(t1, FIRST(1)(src), .Ll_exc_copy) SUB len, len, 4*NBYTES -EXC( LDREST t0, REST(0)(src), .Ll_exc_copy) -EXC( LDREST t1, REST(1)(src), .Ll_exc_copy) -EXC( LDFIRST t2, FIRST(2)(src), .Ll_exc_copy) -EXC( LDFIRST t3, FIRST(3)(src), .Ll_exc_copy) -EXC( LDREST t2, REST(2)(src), .Ll_exc_copy) -EXC( LDREST t3, REST(3)(src), .Ll_exc_copy) + LDREST(t0, REST(0)(src), .Ll_exc_copy) + LDREST(t1, REST(1)(src), .Ll_exc_copy) + LDFIRST(t2, FIRST(2)(src), .Ll_exc_copy) + LDFIRST(t3, FIRST(3)(src), .Ll_exc_copy) + LDREST(t2, REST(2)(src), .Ll_exc_copy) + LDREST(t3, REST(3)(src), .Ll_exc_copy) ADD src, src, 4*NBYTES #ifdef CONFIG_CPU_SB1 nop # improves slotting #endif -EXC( STORE t0, UNIT(0)(dst), .Ls_exc) + STORE(t0, UNIT(0)(dst), .Ls_exc) ADDC(sum, t0) -EXC( STORE t1, UNIT(1)(dst), .Ls_exc) + STORE(t1, UNIT(1)(dst), .Ls_exc) ADDC(sum, t1) -EXC( STORE t2, UNIT(2)(dst), .Ls_exc) + STORE(t2, UNIT(2)(dst), .Ls_exc) ADDC(sum, t2) -EXC( STORE t3, UNIT(3)(dst), .Ls_exc) + STORE(t3, UNIT(3)(dst), .Ls_exc) ADDC(sum, t3) .set reorder /* DADDI_WAR */ ADD dst, dst, 4*NBYTES @@ -613,11 +635,11 @@ EXC( STORE t3, UNIT(3)(dst), .Ls_exc) beq rem, len, .Lcopy_bytes nop 1: -EXC( LDFIRST t0, FIRST(0)(src), .Ll_exc) -EXC( LDREST t0, REST(0)(src), .Ll_exc_copy) + LDFIRST(t0, FIRST(0)(src), .Ll_exc) + LDREST(t0, REST(0)(src), .Ll_exc_copy) ADD src, src, NBYTES SUB len, len, NBYTES -EXC( STORE t0, 0(dst), .Ls_exc) + STORE(t0, 0(dst), .Ls_exc) ADDC(sum, t0) .set reorder /* DADDI_WAR */ ADD dst, dst, NBYTES @@ -640,9 +662,9 @@ EXC( STORE t0, 0(dst), .Ls_exc) li t3, SHIFT_START # shift /* use .Ll_exc_copy here to return correct sum on fault */ #define COPY_BYTE(N) \ -EXC( lbu t0, N(src), .Ll_exc_copy); \ + LOADBU(t0, N(src), .Ll_exc_copy); \ SUB len, len, 1; \ -EXC( sb t0, N(dst), .Ls_exc); \ + STOREB(t0, N(dst), .Ls_exc); \ SLLV t0, t0, t3; \ addu t3, SHIFT_INC; \ beqz len, .Lcopy_bytes_done; \ @@ -656,9 +678,9 @@ EXC( sb t0, N(dst), .Ls_exc); \ COPY_BYTE(4) COPY_BYTE(5) #endif -EXC( lbu t0, NBYTES-2(src), .Ll_exc_copy) + LOADBU(t0, NBYTES-2(src), .Ll_exc_copy) SUB len, len, 1 -EXC( sb t0, NBYTES-2(dst), .Ls_exc) + STOREB(t0, NBYTES-2(dst), .Ls_exc) SLLV t0, t0, t3 or t2, t0 .Lcopy_bytes_done: @@ -703,11 +725,11 @@ EXC( sb t0, NBYTES-2(dst), .Ls_exc) * * Assumes src < THREAD_BUADDR($28) */ - LOAD t0, TI_TASK($28) + LOADK t0, TI_TASK($28) li t2, SHIFT_START - LOAD t0, THREAD_BUADDR(t0) + LOADK t0, THREAD_BUADDR(t0) 1: -EXC( lbu t1, 0(src), .Ll_exc) + LOADBU(t1, 0(src), .Ll_exc) ADD src, src, 1 sb t1, 0(dst) # can't fault -- we're copy_from_user SLLV t1, t1, t2 @@ -718,9 +740,9 @@ EXC( lbu t1, 0(src), .Ll_exc) bne src, t0, 1b .set noreorder .Ll_exc: - LOAD t0, TI_TASK($28) + LOADK t0, TI_TASK($28) nop - LOAD t0, THREAD_BUADDR(t0) # t0 is just past last good address + LOADK t0, THREAD_BUADDR(t0) # t0 is just past last good address nop SUB len, AT, t0 # len number of uncopied bytes /* |