diff options
Diffstat (limited to 'arch/mips/loongson64')
21 files changed, 26 insertions, 767 deletions
diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig index 0e99a5af6e90..3215b768bb88 100644 --- a/arch/mips/loongson64/Kconfig +++ b/arch/mips/loongson64/Kconfig @@ -20,6 +20,7 @@ config LOONGSON_MACH3X select I8259 select IRQ_MIPS_CPU select NR_CPUS_DEFAULT_4 + select USE_GENERIC_EARLY_PRINTK_8250 select SYS_HAS_CPU_LOONGSON64 select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_SMP @@ -30,7 +31,7 @@ config LOONGSON_MACH3X select SYS_SUPPORTS_LITTLE_ENDIAN select LOONGSON_MC146818 select ZONE_DMA32 - select LEFI_FIRMWARE_INTERFACE + select NUMA help Generic Loongson 3 family machines utilize the 3A/3B revision of Loongson processor and RS780/SBX00 chipset. @@ -48,16 +49,9 @@ config RS780_HPET If unsure, say Yes. -config LOONGSON_UART_BASE - bool - default y - depends on EARLY_PRINTK || SERIAL_8250 config LOONGSON_MC146818 bool default n -config LEFI_FIRMWARE_INTERFACE - bool - endif # MACH_LOONGSON64 diff --git a/arch/mips/loongson64/Platform b/arch/mips/loongson64/Platform index 31167e568e46..a1efea6ce6bb 100644 --- a/arch/mips/loongson64/Platform +++ b/arch/mips/loongson64/Platform @@ -53,4 +53,4 @@ endif platform-$(CONFIG_MACH_LOONGSON64) += loongson64/ cflags-$(CONFIG_MACH_LOONGSON64) += -I$(srctree)/arch/mips/include/asm/mach-loongson64 -mno-branch-likely -load-$(CONFIG_LOONGSON_MACH3X) += 0xffffffff80200000 +load-$(CONFIG_CPU_LOONGSON64) += 0xffffffff80200000 diff --git a/arch/mips/loongson64/common/Makefile b/arch/mips/loongson64/common/Makefile index 85438df80950..c476401c9b13 100644 --- a/arch/mips/loongson64/common/Makefile +++ b/arch/mips/loongson64/common/Makefile @@ -3,15 +3,10 @@ # Makefile for loongson based machines. # -obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \ - bonito-irq.o mem.o machtype.o platform.o serial.o +obj-y += setup.o init.o cmdline.o env.o time.o reset.o + obj-$(CONFIG_PCI) += pci.o -# -# Serial port support -# -obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o obj-$(CONFIG_LOONGSON_MC146818) += rtc.o # diff --git a/arch/mips/loongson64/common/bonito-irq.c b/arch/mips/loongson64/common/bonito-irq.c deleted file mode 100644 index 82352cc25e4c..000000000000 --- a/arch/mips/loongson64/common/bonito-irq.c +++ /dev/null @@ -1,49 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org) - * - * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology - * Author: Fuxin Zhang, zhangfx@lemote.com - */ -#include <linux/interrupt.h> -#include <linux/compiler.h> - -#include <loongson.h> - -static inline void bonito_irq_enable(struct irq_data *d) -{ - LOONGSON_INTENSET = (1 << (d->irq - LOONGSON_IRQ_BASE)); - mmiowb(); -} - -static inline void bonito_irq_disable(struct irq_data *d) -{ - LOONGSON_INTENCLR = (1 << (d->irq - LOONGSON_IRQ_BASE)); - mmiowb(); -} - -static struct irq_chip bonito_irq_type = { - .name = "bonito_irq", - .irq_mask = bonito_irq_disable, - .irq_unmask = bonito_irq_enable, -}; - -static struct irqaction __maybe_unused dma_timeout_irqaction = { - .handler = no_action, - .name = "dma_timeout", -}; - -void bonito_irq_init(void) -{ - u32 i; - - for (i = LOONGSON_IRQ_BASE; i < LOONGSON_IRQ_BASE + 32; i++) - irq_set_chip_and_handler(i, &bonito_irq_type, - handle_level_irq); - -#ifdef CONFIG_CPU_LOONGSON2E - setup_irq(LOONGSON_IRQ_BASE + 10, &dma_timeout_irqaction); -#endif -} diff --git a/arch/mips/loongson64/common/cmdline.c b/arch/mips/loongson64/common/cmdline.c index a735460682cf..fb1644b01471 100644 --- a/arch/mips/loongson64/common/cmdline.c +++ b/arch/mips/loongson64/common/cmdline.c @@ -39,6 +39,4 @@ void __init prom_init_cmdline(void) strcat(arcs_cmdline, ((char *)l)); strcat(arcs_cmdline, " "); } - - prom_init_machtype(); } diff --git a/arch/mips/loongson64/common/early_printk.c b/arch/mips/loongson64/common/early_printk.c deleted file mode 100644 index 5e2a151aa30c..000000000000 --- a/arch/mips/loongson64/common/early_printk.c +++ /dev/null @@ -1,38 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* early printk support - * - * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca> - * Copyright (c) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - */ -#include <linux/serial_reg.h> -#include <asm/setup.h> - -#include <loongson.h> - -#define PORT(base, offset) (u8 *)(base + offset) - -static inline unsigned int serial_in(unsigned char *base, int offset) -{ - return readb(PORT(base, offset)); -} - -static inline void serial_out(unsigned char *base, int offset, int value) -{ - writeb(value, PORT(base, offset)); -} - -void prom_putchar(char c) -{ - int timeout; - unsigned char *uart_base; - - uart_base = (unsigned char *)_loongson_uart_base[0]; - timeout = 1024; - - while (((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0) && - (timeout-- > 0)) - ; - - serial_out(uart_base, UART_TX, c); -} diff --git a/arch/mips/loongson64/common/env.c b/arch/mips/loongson64/common/env.c index 09d5cf4676ca..0daeb7bcf023 100644 --- a/arch/mips/loongson64/common/env.c +++ b/arch/mips/loongson64/common/env.c @@ -30,41 +30,13 @@ u64 loongson_freqctrl[MAX_PACKAGES]; unsigned long long smp_group[4]; -#define parse_even_earlier(res, option, p) \ -do { \ - unsigned int tmp __maybe_unused; \ - \ - if (strncmp(option, (char *)p, strlen(option)) == 0) \ - tmp = kstrtou32((char *)p + strlen(option"="), 10, &res); \ -} while (0) +const char *get_system_type(void) +{ + return "Generic Loongson64 System"; +} void __init prom_init_env(void) { - /* pmon passes arguments in 32bit pointers */ - unsigned int processor_id; - -#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE - int *_prom_envp; - long l; - - /* firmware arguments are initialized in head.S */ - _prom_envp = (int *)fw_arg2; - - l = (long)*_prom_envp; - while (l != 0) { - parse_even_earlier(cpu_clock_freq, "cpuclock", l); - parse_even_earlier(memsize, "memsize", l); - parse_even_earlier(highmemsize, "highmemsize", l); - _prom_envp++; - l = (long)*_prom_envp; - } - if (memsize == 0) - memsize = 256; - - loongson_sysconf.nr_uarts = 1; - - pr_info("memsize=%u, highmemsize=%u\n", memsize, highmemsize); -#else struct boot_params *boot_p; struct loongson_params *loongson_p; struct system_loongson *esys; @@ -182,31 +154,5 @@ void __init prom_init_env(void) if (loongson_sysconf.nr_sensors) memcpy(loongson_sysconf.sensors, esys->sensors, sizeof(struct sensor_device) * loongson_sysconf.nr_sensors); -#endif - if (cpu_clock_freq == 0) { - processor_id = (¤t_cpu_data)->processor_id; - switch (processor_id & PRID_REV_MASK) { - case PRID_REV_LOONGSON2E: - cpu_clock_freq = 533080000; - break; - case PRID_REV_LOONGSON2F: - cpu_clock_freq = 797000000; - break; - case PRID_REV_LOONGSON3A_R1: - case PRID_REV_LOONGSON3A_R2_0: - case PRID_REV_LOONGSON3A_R2_1: - case PRID_REV_LOONGSON3A_R3_0: - case PRID_REV_LOONGSON3A_R3_1: - cpu_clock_freq = 900000000; - break; - case PRID_REV_LOONGSON3B_R1: - case PRID_REV_LOONGSON3B_R2: - cpu_clock_freq = 1000000000; - break; - default: - cpu_clock_freq = 100000000; - break; - } - } pr_info("CpuClock = %u\n", cpu_clock_freq); } diff --git a/arch/mips/loongson64/common/init.c b/arch/mips/loongson64/common/init.c index 912fe61c4fc7..48b44f415059 100644 --- a/arch/mips/loongson64/common/init.c +++ b/arch/mips/loongson64/common/init.c @@ -12,9 +12,6 @@ #include <loongson.h> -/* Loongson CPU address windows config space base address */ -unsigned long __maybe_unused _loongson_addrwincfg_base; - static void __init mips_nmi_setup(void) { void *base; @@ -27,11 +24,6 @@ static void __init mips_nmi_setup(void) void __init prom_init(void) { -#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG - _loongson_addrwincfg_base = (unsigned long) - ioremap(LOONGSON_ADDRWINCFG_BASE, LOONGSON_ADDRWINCFG_SIZE); -#endif - prom_init_cmdline(); prom_init_env(); @@ -39,14 +31,11 @@ void __init prom_init(void) set_io_port_base((unsigned long) ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE)); -#ifdef CONFIG_NUMA prom_init_numa_memory(); -#else - prom_init_memory(); -#endif - /*init the uart base address */ - prom_init_uart_base(); + /* Hardcode to CPU UART 0 */ + setup_8250_early_printk_port(TO_UNCAC(LOONGSON_REG_BASE + 0x1e0), 0, 1024); + register_smp_ops(&loongson3_smp_ops); board_nmi_handler_setup = mips_nmi_setup; } diff --git a/arch/mips/loongson64/common/irq.c b/arch/mips/loongson64/common/irq.c deleted file mode 100644 index 0ea93c1c0a97..000000000000 --- a/arch/mips/loongson64/common/irq.c +++ /dev/null @@ -1,63 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology - * Author: Fuxin Zhang, zhangfx@lemote.com - */ -#include <linux/delay.h> -#include <linux/interrupt.h> - -#include <loongson.h> -/* - * the first level int-handler will jump here if it is a bonito irq - */ -void bonito_irqdispatch(void) -{ - u32 int_status; - int i; - - /* workaround the IO dma problem: let cpu looping to allow DMA finish */ - int_status = LOONGSON_INTISR; - while (int_status & (1 << 10)) { - udelay(1); - int_status = LOONGSON_INTISR; - } - - /* Get pending sources, masked by current enables */ - int_status = LOONGSON_INTISR & LOONGSON_INTEN; - - if (int_status) { - i = __ffs(int_status); - do_IRQ(LOONGSON_IRQ_BASE + i); - } -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending; - - pending = read_c0_cause() & read_c0_status() & ST0_IM; - - /* machine-specific plat_irq_dispatch */ - mach_irq_dispatch(pending); -} - -void __init arch_init_irq(void) -{ - /* - * Clear all of the interrupts while we change the able around a bit. - * int-handler is not on bootstrap - */ - clear_c0_status(ST0_IM | ST0_BEV); - - /* no steer */ - LOONGSON_INTSTEER = 0; - - /* - * Mask out all interrupt by writing "1" to all bit position in - * the interrupt reset reg. - */ - LOONGSON_INTENCLR = ~0; - - /* machine specific irq init */ - mach_init_irq(); -} diff --git a/arch/mips/loongson64/common/machtype.c b/arch/mips/loongson64/common/machtype.c deleted file mode 100644 index 4e42d929f1c7..000000000000 --- a/arch/mips/loongson64/common/machtype.c +++ /dev/null @@ -1,63 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - * - * Copyright (c) 2009 Zhang Le <r0bertz@gentoo.org> - */ -#include <linux/errno.h> -#include <asm/bootinfo.h> - -#include <loongson.h> -#include <machine.h> - -/* please ensure the length of the machtype string is less than 50 */ -#define MACHTYPE_LEN 50 - -static const char *system_types[] = { - [MACH_LOONGSON_UNKNOWN] = "unknown loongson machine", - [MACH_LEMOTE_FL2E] = "lemote-fuloong-2e-box", - [MACH_LEMOTE_FL2F] = "lemote-fuloong-2f-box", - [MACH_LEMOTE_ML2F7] = "lemote-mengloong-2f-7inches", - [MACH_LEMOTE_YL2F89] = "lemote-yeeloong-2f-8.9inches", - [MACH_DEXXON_GDIUM2F10] = "dexxon-gdium-2f", - [MACH_LEMOTE_NAS] = "lemote-nas-2f", - [MACH_LEMOTE_LL2F] = "lemote-lynloong-2f", - [MACH_LOONGSON_GENERIC] = "generic-loongson-machine", - [MACH_LOONGSON_END] = NULL, -}; - -const char *get_system_type(void) -{ - return system_types[mips_machtype]; -} - -void __weak __init mach_prom_init_machtype(void) -{ -} - -void __init prom_init_machtype(void) -{ - char *p, str[MACHTYPE_LEN + 1]; - int machtype = MACH_LEMOTE_FL2E; - - mips_machtype = LOONGSON_MACHTYPE; - - p = strstr(arcs_cmdline, "machtype="); - if (!p) { - mach_prom_init_machtype(); - return; - } - p += strlen("machtype="); - strncpy(str, p, MACHTYPE_LEN); - str[MACHTYPE_LEN] = '\0'; - p = strstr(str, " "); - if (p) - *p = '\0'; - - for (; system_types[machtype]; machtype++) - if (strstr(system_types[machtype], str)) { - mips_machtype = machtype; - break; - } -} diff --git a/arch/mips/loongson64/common/mem.c b/arch/mips/loongson64/common/mem.c deleted file mode 100644 index 4254ac4ec616..000000000000 --- a/arch/mips/loongson64/common/mem.c +++ /dev/null @@ -1,157 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - */ -#include <linux/fs.h> -#include <linux/fcntl.h> -#include <linux/memblock.h> -#include <linux/mm.h> - -#include <asm/bootinfo.h> - -#include <loongson.h> -#include <boot_param.h> -#include <mem.h> -#include <pci.h> - -#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE - -u32 memsize, highmemsize; - -void __init prom_init_memory(void) -{ - add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM); - - add_memory_region(memsize << 20, LOONGSON_PCI_MEM_START - (memsize << - 20), BOOT_MEM_RESERVED); - -#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG - { - int bit; - - bit = fls(memsize + highmemsize); - if (bit != ffs(memsize + highmemsize)) - bit += 20; - else - bit = bit + 20 - 1; - - /* set cpu window3 to map CPU to DDR: 2G -> 2G */ - LOONGSON_ADDRWIN_CPUTODDR(ADDRWIN_WIN3, 0x80000000ul, - 0x80000000ul, (1 << bit)); - mmiowb(); - } -#endif /* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */ - -#ifdef CONFIG_64BIT - if (highmemsize > 0) - add_memory_region(LOONGSON_HIGHMEM_START, - highmemsize << 20, BOOT_MEM_RAM); - - add_memory_region(LOONGSON_PCI_MEM_END + 1, LOONGSON_HIGHMEM_START - - LOONGSON_PCI_MEM_END - 1, BOOT_MEM_RESERVED); - -#endif /* !CONFIG_64BIT */ -} - -#else /* CONFIG_LEFI_FIRMWARE_INTERFACE */ - -void __init prom_init_memory(void) -{ - int i; - u32 node_id; - u32 mem_type; - - /* parse memory information */ - for (i = 0; i < loongson_memmap->nr_map; i++) { - node_id = loongson_memmap->map[i].node_id; - mem_type = loongson_memmap->map[i].mem_type; - - if (node_id != 0) - continue; - - switch (mem_type) { - case SYSTEM_RAM_LOW: - memblock_add(loongson_memmap->map[i].mem_start, - (u64)loongson_memmap->map[i].mem_size << 20); - break; - case SYSTEM_RAM_HIGH: - memblock_add(loongson_memmap->map[i].mem_start, - (u64)loongson_memmap->map[i].mem_size << 20); - break; - case SYSTEM_RAM_RESERVED: - memblock_reserve(loongson_memmap->map[i].mem_start, - (u64)loongson_memmap->map[i].mem_size << 20); - break; - } - } -} - -#endif /* CONFIG_LEFI_FIRMWARE_INTERFACE */ - -/* override of arch/mips/mm/cache.c: __uncached_access */ -int __uncached_access(struct file *file, unsigned long addr) -{ - if (file->f_flags & O_DSYNC) - return 1; - - return addr >= __pa(high_memory) || - ((addr >= LOONGSON_MMIO_MEM_START) && - (addr < LOONGSON_MMIO_MEM_END)); -} - -#ifdef CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED - -#include <linux/pci.h> -#include <linux/sched.h> -#include <asm/current.h> - -static unsigned long uca_start, uca_end; - -pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, - unsigned long size, pgprot_t vma_prot) -{ - unsigned long offset = pfn << PAGE_SHIFT; - unsigned long end = offset + size; - - if (__uncached_access(file, offset)) { - if (uca_start && (offset >= uca_start) && - (end <= uca_end)) - return __pgprot((pgprot_val(vma_prot) & - ~_CACHE_MASK) | - _CACHE_UNCACHED_ACCELERATED); - else - return pgprot_noncached(vma_prot); - } - return vma_prot; -} - -static int __init find_vga_mem_init(void) -{ - struct pci_dev *dev = 0; - struct resource *r; - int idx; - - if (uca_start) - return 0; - - for_each_pci_dev(dev) { - if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) { - for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) { - r = &dev->resource[idx]; - if (!r->start && r->end) - continue; - if (r->flags & IORESOURCE_IO) - continue; - if (r->flags & IORESOURCE_MEM) { - uca_start = r->start; - uca_end = r->end; - return 0; - } - } - } - } - - return 0; -} - -late_initcall(find_vga_mem_init); -#endif /* !CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED */ diff --git a/arch/mips/loongson64/common/pci.c b/arch/mips/loongson64/common/pci.c index 2d9755c49524..7bbe2388f38e 100644 --- a/arch/mips/loongson64/common/pci.c +++ b/arch/mips/loongson64/common/pci.c @@ -81,15 +81,12 @@ static int __init pcibios_init(void) setup_pcimap(); loongson_pci_controller.io_map_base = mips_io_port_base; -#ifdef CONFIG_LEFI_FIRMWARE_INTERFACE loongson_pci_mem_resource.start = loongson_sysconf.pci_mem_start_addr; loongson_pci_mem_resource.end = loongson_sysconf.pci_mem_end_addr; -#endif + register_pci_controller(&loongson_pci_controller); -#ifdef CONFIG_CPU_LOONGSON64 sbx00_acpi_init(); -#endif return 0; } diff --git a/arch/mips/loongson64/common/platform.c b/arch/mips/loongson64/common/platform.c deleted file mode 100644 index 0084820cffaa..000000000000 --- a/arch/mips/loongson64/common/platform.c +++ /dev/null @@ -1,27 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - */ - -#include <linux/err.h> -#include <linux/smp.h> -#include <linux/platform_device.h> - -static struct platform_device loongson2_cpufreq_device = { - .name = "loongson2_cpufreq", - .id = -1, -}; - -static int __init loongson2_cpufreq_init(void) -{ - struct cpuinfo_mips *c = ¤t_cpu_data; - - /* Only 2F revision and it's successors support CPUFreq */ - if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_LOONGSON2F) - return platform_device_register(&loongson2_cpufreq_device); - - return -ENODEV; -} - -arch_initcall(loongson2_cpufreq_init); diff --git a/arch/mips/loongson64/common/pm.c b/arch/mips/loongson64/common/pm.c index b8aed878d912..7c8556f09781 100644 --- a/arch/mips/loongson64/common/pm.c +++ b/arch/mips/loongson64/common/pm.c @@ -60,56 +60,6 @@ void __weak setup_wakeup_events(void) { } -/* - * Check wakeup events - */ -int __weak wakeup_loongson(void) -{ - return 1; -} - -/* - * If the events are really what we want to wakeup the CPU, wake it up - * otherwise put the CPU asleep again. - */ -static void wait_for_wakeup_events(void) -{ - while (!wakeup_loongson()) - LOONGSON_CHIPCFG(0) &= ~0x7; -} - -/* - * Stop all perf counters - * - * $24 is the control register of Loongson perf counter - */ -static inline void stop_perf_counters(void) -{ - __write_64bit_c0_register($24, 0, 0); -} - - -static void loongson_suspend_enter(void) -{ - static unsigned int cached_cpu_freq; - - /* setup wakeup events via enabling the IRQs */ - setup_wakeup_events(); - - stop_perf_counters(); - - cached_cpu_freq = LOONGSON_CHIPCFG(0); - - /* Put CPU into wait mode */ - LOONGSON_CHIPCFG(0) &= ~0x7; - - /* wait for the given events to wakeup cpu from wait mode */ - wait_for_wakeup_events(); - - LOONGSON_CHIPCFG(0) = cached_cpu_freq; - mmiowb(); -} - void __weak mach_suspend(void) { } @@ -122,9 +72,6 @@ static int loongson_pm_enter(suspend_state_t state) { mach_suspend(); - /* processor specific suspend */ - loongson_suspend_enter(); - mach_resume(); return 0; diff --git a/arch/mips/loongson64/common/reset.c b/arch/mips/loongson64/common/reset.c index ce39e918e4d5..88b3bd5fed25 100644 --- a/arch/mips/loongson64/common/reset.c +++ b/arch/mips/loongson64/common/reset.c @@ -17,31 +17,12 @@ static inline void loongson_reboot(void) { -#ifndef CONFIG_CPU_JUMP_WORKAROUNDS ((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) (); -#else - void (*func)(void); - - func = (void *)ioremap_nocache(LOONGSON_BOOT_BASE, 4); - - __asm__ __volatile__( - " .set noat \n" - " jr %[func] \n" - " .set at \n" - : /* No outputs */ - : [func] "r" (func)); -#endif } static void loongson_restart(char *command) { -#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE - /* do preparation for reboot */ - mach_prepare_reboot(); - /* reboot via jumping to boot base address */ - loongson_reboot(); -#else void (*fw_restart)(void) = (void *)loongson_sysconf.restart_addr; fw_restart(); @@ -49,20 +30,10 @@ static void loongson_restart(char *command) if (cpu_wait) cpu_wait(); } -#endif } static void loongson_poweroff(void) { -#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE - mach_prepare_shutdown(); - - /* - * It needs a wait loop here, but mips/kernel/reset.c already calls - * a generic delay loop, machine_hang(), so simply return. - */ - return; -#else void (*fw_poweroff)(void) = (void *)loongson_sysconf.poweroff_addr; fw_poweroff(); @@ -70,7 +41,6 @@ static void loongson_poweroff(void) if (cpu_wait) cpu_wait(); } -#endif } static void loongson_halt(void) diff --git a/arch/mips/loongson64/common/serial.c b/arch/mips/loongson64/common/serial.c deleted file mode 100644 index 98c3a7feb10f..000000000000 --- a/arch/mips/loongson64/common/serial.c +++ /dev/null @@ -1,117 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) - * - * Copyright (C) 2009 Lemote, Inc. - * Author: Yan hua (yanhua@lemote.com) - * Author: Wu Zhangjin (wuzhangjin@gmail.com) - */ - -#include <linux/io.h> -#include <linux/module.h> -#include <linux/serial_8250.h> - -#include <asm/bootinfo.h> - -#include <loongson.h> -#include <machine.h> - -#define PORT(int, clk) \ -{ \ - .irq = int, \ - .uartclk = clk, \ - .iotype = UPIO_PORT, \ - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ - .regshift = 0, \ -} - -#define PORT_M(int, clk) \ -{ \ - .irq = MIPS_CPU_IRQ_BASE + (int), \ - .uartclk = clk, \ - .iotype = UPIO_MEM, \ - .membase = (void __iomem *)NULL, \ - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ - .regshift = 0, \ -} - -static struct plat_serial8250_port uart8250_data[][MAX_UARTS + 1] = { - [MACH_LOONGSON_UNKNOWN] = {}, - [MACH_LEMOTE_FL2E] = {PORT(4, 1843200), {} }, - [MACH_LEMOTE_FL2F] = {PORT(3, 1843200), {} }, - [MACH_LEMOTE_ML2F7] = {PORT_M(3, 3686400), {} }, - [MACH_LEMOTE_YL2F89] = {PORT_M(3, 3686400), {} }, - [MACH_DEXXON_GDIUM2F10] = {PORT_M(3, 3686400), {} }, - [MACH_LEMOTE_NAS] = {PORT_M(3, 3686400), {} }, - [MACH_LEMOTE_LL2F] = {PORT(3, 1843200), {} }, - [MACH_LOONGSON_GENERIC] = {PORT_M(2, 25000000), {} }, - [MACH_LOONGSON_END] = {}, -}; - -static struct platform_device uart8250_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, -}; - -static int __init serial_init(void) -{ - int i; - unsigned char iotype; - - iotype = uart8250_data[mips_machtype][0].iotype; - - if (UPIO_MEM == iotype) { - uart8250_data[mips_machtype][0].mapbase = - loongson_uart_base[0]; - uart8250_data[mips_machtype][0].membase = - (void __iomem *)_loongson_uart_base[0]; - } - else if (UPIO_PORT == iotype) - uart8250_data[mips_machtype][0].iobase = - loongson_uart_base[0] - LOONGSON_PCIIO_BASE; - - if (loongson_sysconf.uarts[0].uartclk) - uart8250_data[mips_machtype][0].uartclk = - loongson_sysconf.uarts[0].uartclk; - - for (i = 1; i < loongson_sysconf.nr_uarts; i++) { - iotype = loongson_sysconf.uarts[i].iotype; - uart8250_data[mips_machtype][i].iotype = iotype; - loongson_uart_base[i] = loongson_sysconf.uarts[i].uart_base; - - if (UPIO_MEM == iotype) { - uart8250_data[mips_machtype][i].irq = - MIPS_CPU_IRQ_BASE + loongson_sysconf.uarts[i].int_offset; - uart8250_data[mips_machtype][i].mapbase = - loongson_uart_base[i]; - uart8250_data[mips_machtype][i].membase = - ioremap_nocache(loongson_uart_base[i], 8); - } else if (UPIO_PORT == iotype) { - uart8250_data[mips_machtype][i].irq = - loongson_sysconf.uarts[i].int_offset; - uart8250_data[mips_machtype][i].iobase = - loongson_uart_base[i] - LOONGSON_PCIIO_BASE; - } - - uart8250_data[mips_machtype][i].uartclk = - loongson_sysconf.uarts[i].uartclk; - uart8250_data[mips_machtype][i].flags = - UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; - } - - memset(&uart8250_data[mips_machtype][loongson_sysconf.nr_uarts], - 0, sizeof(struct plat_serial8250_port)); - uart8250_device.dev.platform_data = uart8250_data[mips_machtype]; - - return platform_device_register(&uart8250_device); -} -module_init(serial_init); - -static void __exit serial_exit(void) -{ - platform_device_unregister(&uart8250_device); -} -module_exit(serial_exit); diff --git a/arch/mips/loongson64/common/setup.c b/arch/mips/loongson64/common/setup.c index bc2da4c140c4..4fd27f4f90ed 100644 --- a/arch/mips/loongson64/common/setup.c +++ b/arch/mips/loongson64/common/setup.c @@ -11,11 +11,6 @@ #include <loongson.h> -#ifdef CONFIG_VT -#include <linux/console.h> -#include <linux/screen_info.h> -#endif - static void wbflush_loongson(void) { asm(".set\tpush\n\t" @@ -32,20 +27,4 @@ EXPORT_SYMBOL(__wbflush); void __init plat_mem_setup(void) { -#ifdef CONFIG_VT -#if defined(CONFIG_VGA_CONSOLE) - conswitchp = &vga_con; - - screen_info = (struct screen_info) { - .orig_x = 0, - .orig_y = 25, - .orig_video_cols = 80, - .orig_video_lines = 25, - .orig_video_isVGA = VIDEO_TYPE_VGAC, - .orig_video_points = 16, - }; -#elif defined(CONFIG_DUMMY_CONSOLE) - conswitchp = &dummy_con; -#endif -#endif } diff --git a/arch/mips/loongson64/common/time.c b/arch/mips/loongson64/common/time.c index e78760ce475b..1245f22cec84 100644 --- a/arch/mips/loongson64/common/time.c +++ b/arch/mips/loongson64/common/time.c @@ -11,7 +11,6 @@ #include <asm/hpet.h> #include <loongson.h> -#include <cs5536/cs5536_mfgpt.h> void __init plat_time_init(void) { @@ -20,8 +19,6 @@ void __init plat_time_init(void) #ifdef CONFIG_RS780_HPET setup_hpet_timer(); -#else - setup_mfgpt0_timer(); #endif } diff --git a/arch/mips/loongson64/common/uart_base.c b/arch/mips/loongson64/common/uart_base.c deleted file mode 100644 index e88d937f10fe..000000000000 --- a/arch/mips/loongson64/common/uart_base.c +++ /dev/null @@ -1,46 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - */ - -#include <linux/export.h> -#include <asm/bootinfo.h> - -#include <loongson.h> - -/* raw */ -unsigned long loongson_uart_base[MAX_UARTS] = {}; -/* ioremapped */ -unsigned long _loongson_uart_base[MAX_UARTS] = {}; - -EXPORT_SYMBOL(loongson_uart_base); -EXPORT_SYMBOL(_loongson_uart_base); - -void prom_init_loongson_uart_base(void) -{ - switch (mips_machtype) { - case MACH_LOONGSON_GENERIC: - /* The CPU provided serial port (CPU) */ - loongson_uart_base[0] = LOONGSON_REG_BASE + 0x1e0; - break; - case MACH_LEMOTE_FL2E: - loongson_uart_base[0] = LOONGSON_PCIIO_BASE + 0x3f8; - break; - case MACH_LEMOTE_FL2F: - case MACH_LEMOTE_LL2F: - loongson_uart_base[0] = LOONGSON_PCIIO_BASE + 0x2f8; - break; - case MACH_LEMOTE_ML2F7: - case MACH_LEMOTE_YL2F89: - case MACH_DEXXON_GDIUM2F10: - case MACH_LEMOTE_NAS: - default: - /* The CPU provided serial port (LPC) */ - loongson_uart_base[0] = LOONGSON_LIO1_BASE + 0x3f8; - break; - } - - _loongson_uart_base[0] = - (unsigned long)ioremap_nocache(loongson_uart_base[0], 8); -} diff --git a/arch/mips/loongson64/loongson-3/irq.c b/arch/mips/loongson64/loongson-3/irq.c index 5605061f5f98..79ad797497e4 100644 --- a/arch/mips/loongson64/loongson-3/irq.c +++ b/arch/mips/loongson64/loongson-3/irq.c @@ -78,8 +78,12 @@ static void ht_irqdispatch(void) #define UNUSED_IPS (CAUSEF_IP5 | CAUSEF_IP4 | CAUSEF_IP1 | CAUSEF_IP0) -void mach_irq_dispatch(unsigned int pending) +asmlinkage void plat_irq_dispatch(void) { + unsigned int pending; + + pending = read_c0_cause() & read_c0_status() & ST0_IM; + if (pending & CAUSEF_IP7) do_IRQ(LOONGSON_TIMER_IRQ); #if defined(CONFIG_SMP) @@ -127,7 +131,7 @@ void irq_router_init(void) LOONGSON_INT_ROUTER_INTEN | (0xffff << 16) | 0x1 << 10; } -void __init mach_init_irq(void) +void __init arch_init_irq(void) { struct irq_chip *chip; diff --git a/arch/mips/loongson64/loongson-3/numa.c b/arch/mips/loongson64/loongson-3/numa.c index 8f20d2cb3767..ef94a2278561 100644 --- a/arch/mips/loongson64/loongson-3/numa.c +++ b/arch/mips/loongson64/loongson-3/numa.c @@ -26,12 +26,15 @@ #include <asm/wbflush.h> #include <boot_param.h> -static struct node_data prealloc__node_data[MAX_NUMNODES]; +static struct pglist_data prealloc__node_data[MAX_NUMNODES]; unsigned char __node_distances[MAX_NUMNODES][MAX_NUMNODES]; EXPORT_SYMBOL(__node_distances); -struct node_data *__node_data[MAX_NUMNODES]; +struct pglist_data *__node_data[MAX_NUMNODES]; EXPORT_SYMBOL(__node_data); +cpumask_t __node_cpumask[MAX_NUMNODES]; +EXPORT_SYMBOL(__node_cpumask); + static void enable_lpa(void) { unsigned long value; @@ -214,7 +217,7 @@ static __init void prom_meminit(void) if (node_online(node)) { szmem(node); node_mem_init(node); - cpumask_clear(&__node_data[(node)]->cpumask); + cpumask_clear(&__node_cpumask[node]); } } memblocks_present(); @@ -228,7 +231,7 @@ static __init void prom_meminit(void) if (loongson_sysconf.reserved_cpus_mask & (1<<cpu)) continue; - cpumask_set_cpu(active_cpu, &__node_data[(node)]->cpumask); + cpumask_set_cpu(active_cpu, &__node_cpumask[node]); pr_info("NUMA: set cpumask cpu %d on node %d\n", active_cpu, node); active_cpu++; |