diff options
Diffstat (limited to 'arch/powerpc/boot/dts/pcm032.dts')
| -rw-r--r-- | arch/powerpc/boot/dts/pcm032.dts | 392 |
1 files changed, 392 insertions, 0 deletions
diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts new file mode 100644 index 000000000000..030042678392 --- /dev/null +++ b/arch/powerpc/boot/dts/pcm032.dts @@ -0,0 +1,392 @@ +/* + * phyCORE-MPC5200B-IO (pcm032) board Device Tree Source + * + * Copyright (C) 2006-2009 Pengutronix + * Sascha Hauer <s.hauer@pengutronix.de> + * Juergen Beisert <j.beisert@pengutronix.de> + * Wolfram Sang <w.sang@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "phytec,pcm032"; + compatible = "phytec,pcm032"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; // 128MB + }; + + soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200b-immr"; + ranges = <0 0xf0000000 0x0000c000>; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader + + cdm@200 { + compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; + reg = <0x200 0x38>; + }; + + mpc5200_pic: interrupt-controller@500 { + // 5200 interrupts are encoded into two levels; + interrupt-controller; + #interrupt-cells = <3>; + compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; + reg = <0x500 0x80>; + }; + + timer@600 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x600 0x10>; + interrupts = <1 9 0>; + fsl,has-wdt; + }; + + timer@610 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x610 0x10>; + interrupts = <1 10 0>; + }; + + gpt2: timer@620 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x620 0x10>; + interrupts = <1 11 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt3: timer@630 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x630 0x10>; + interrupts = <1 12 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt4: timer@640 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x640 0x10>; + interrupts = <1 13 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt5: timer@650 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x650 0x10>; + interrupts = <1 14 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt6: timer@660 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x660 0x10>; + interrupts = <1 15 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt7: timer@670 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x670 0x10>; + interrupts = <1 16 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + rtc@800 { // Real time clock + compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; + reg = <0x800 0x100>; + interrupts = <1 5 0 1 6 0>; + }; + + can@900 { + compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; + interrupts = <2 17 0>; + reg = <0x900 0x80>; + }; + + can@980 { + compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; + interrupts = <2 18 0>; + reg = <0x980 0x80>; + }; + + gpio_simple: gpio@b00 { + compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; + reg = <0xb00 0x40>; + interrupts = <1 7 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio_wkup: gpio@c00 { + compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; + reg = <0xc00 0x40>; + interrupts = <1 8 0 0 3 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + spi@f00 { + compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; + reg = <0xf00 0x20>; + interrupts = <2 13 0 2 14 0>; + }; + + usb@1000 { + compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; + reg = <0x1000 0xff>; + interrupts = <2 6 0>; + }; + + dma-controller@1200 { + compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; + reg = <0x1200 0x80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; + }; + + xlb@1f00 { + compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; + reg = <0x1f00 0x100>; + }; + + ac97@2000 { /* PSC1 is ac97 */ + compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97"; + cell-index = <0>; + reg = <0x2000 0x100>; + interrupts = <2 1 0>; + }; + + /* PSC2 port is used by CAN1/2 */ + + serial@2400 { /* PSC3 in UART mode */ + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + cell-index = <2>; + reg = <0x2400 0x100>; + interrupts = <2 3 0>; + }; + + /* PSC4 is ??? */ + + /* PSC5 is ??? */ + + serial@2c00 { /* PSC6 in UART mode */ + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + cell-index = <5>; + reg = <0x2c00 0x100>; + interrupts = <2 4 0>; + }; + + ethernet@3000 { + compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; + reg = <0x3000 0x400>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + ata@3a00 { + compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; + reg = <0x3a00 0x100>; + interrupts = <2 7 0>; + }; + + i2c@3d00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d00 0x40>; + interrupts = <2 15 0>; + fsl5200-clocking; + }; + + i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; + fsl5200-clocking; + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + eeprom@52 { + compatible = "at24,24c32"; + reg = <0x52>; + }; + }; + + sram@8000 { + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; + reg = <0xf0000d00 0x100>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot + 0xc000 0 0 2 &mpc5200_pic 1 1 3 + 0xc000 0 0 3 &mpc5200_pic 1 2 3 + 0xc000 0 0 4 &mpc5200_pic 1 3 3 + + 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot + 0xc800 0 0 2 &mpc5200_pic 1 2 3 + 0xc800 0 0 3 &mpc5200_pic 1 3 3 + 0xc800 0 0 4 &mpc5200_pic 0 0 3>; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 10 0>; + bus-range = <0 0>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 + 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; + }; + + localbus { + compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0 0 0xfe000000 0x02000000 + 1 0 0xfc000000 0x02000000 + 2 0 0xfbe00000 0x00200000 + 3 0 0xf9e00000 0x02000000 + 4 0 0xf7e00000 0x02000000 + 5 0 0xe6000000 0x02000000 + 6 0 0xe8000000 0x02000000 + 7 0 0xea000000 0x02000000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <4>; + #size-cells = <1>; + #address-cells = <1>; + + partition@0 { + label = "ubootl"; + reg = <0x00000000 0x00040000>; + }; + partition@40000 { + label = "kernel"; + reg = <0x00040000 0x001c0000>; + }; + partition@200000 { + label = "jffs2"; + reg = <0x00200000 0x01d00000>; + }; + partition@1f00000 { + label = "uboot"; + reg = <0x01f00000 0x00040000>; + }; + partition@1f40000 { + label = "env"; + reg = <0x01f40000 0x00040000>; + }; + partition@1f80000 { + label = "oftree"; + reg = <0x01f80000 0x00040000>; + }; + partition@1fc0000 { + label = "space"; + reg = <0x01fc0000 0x00040000>; + }; + }; + + sram@2,0 { + compatible = "mtd-ram"; + reg = <2 0 0x00200000>; + bank-width = <2>; + }; + + /* + * example snippets for FPGA + * + * fpga@3,0 { + * compatible = "fpga_driver"; + * reg = <3 0 0x02000000>; + * bank-width = <4>; + * }; + * + * fpga@4,0 { + * compatible = "fpga_driver"; + * reg = <4 0 0x02000000>; + * bank-width = <4>; + * }; + */ + + /* + * example snippets for free chipselects + * + * device@5,0 { + * compatible = "custom_driver"; + * reg = <5 0 0x02000000>; + * }; + * + * device@6,0 { + * compatible = "custom_driver"; + * reg = <6 0 0x02000000>; + * }; + * + * device@7,0 { + * compatible = "custom_driver"; + * reg = <7 0 0x02000000>; + * }; + */ + }; +}; + |