diff options
Diffstat (limited to 'arch/powerpc/boot/dts')
21 files changed, 721 insertions, 455 deletions
diff --git a/arch/powerpc/boot/dts/ebony.dts b/arch/powerpc/boot/dts/ebony.dts index 0ec02f4726b5..c5f99613fc7b 100644 --- a/arch/powerpc/boot/dts/ebony.dts +++ b/arch/powerpc/boot/dts/ebony.dts @@ -31,8 +31,8 @@ reg = <0>; clock-frequency = <0>; // Filled in by zImage timebase-frequency = <0>; // Filled in by zImage - i-cache-line-size = <32>; - d-cache-line-size = <32>; + i-cache-line-size = <20>; + d-cache-line-size = <20>; i-cache-size = <8000>; /* 32 kB */ d-cache-size = <8000>; /* 32 kB */ dcr-controller; @@ -135,11 +135,9 @@ #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; // Filled in by zImage - ranges = <0 00000000 fff00000 100000 - 1 00000000 48000000 100000 - 2 00000000 ff800000 400000 - 3 00000000 48200000 100000 - 7 00000000 48300000 100000>; + // ranges property is supplied by zImage + // based on firmware's configuration of the + // EBC bridge interrupts = <5 4>; interrupt-parent = <&UIC1>; diff --git a/arch/powerpc/boot/dts/holly.dts b/arch/powerpc/boot/dts/holly.dts index 254499b107f4..80a4fab8ee37 100644 --- a/arch/powerpc/boot/dts/holly.dts +++ b/arch/powerpc/boot/dts/holly.dts @@ -46,7 +46,7 @@ tsi109@c0000000 { device_type = "tsi-bridge"; - compatible = "tsi-bridge"; + compatible = "tsi109-bridge", "tsi108-bridge"; #address-cells = <1>; #size-cells = <1>; ranges = <00000000 c0000000 00010000>; @@ -54,52 +54,55 @@ i2c@7000 { device_type = "i2c"; - compatible = "tsi-i2c"; - interrupt-parent = < &/tsi109@c0000000/pic@7400 >; + compatible = "tsi109-i2c", "tsi108-i2c"; + interrupt-parent = <&MPIC>; interrupts = <e 2>; reg = <7000 400>; }; - mdio@6000 { + MDIO: mdio@6000 { device_type = "mdio"; - compatible = "tsi-ethernet"; + compatible = "tsi109-mdio", "tsi108-mdio"; + reg = <6000 50>; + #address-cells = <1>; + #size-cells = <0>; - PHY1: ethernet-phy@6000 { - device_type = "ethernet-phy"; - compatible = "bcm54xx"; - reg = <6000 50>; - phy-id = <1>; + PHY1: ethernet-phy@1 { + compatible = "bcm5461a"; + reg = <1>; + txc-rxc-delay-disable; }; - PHY2: ethernet-phy@6400 { - device_type = "ethernet-phy"; - compatible = "bcm54xx"; - reg = <6000 50>; - phy-id = <2>; + PHY2: ethernet-phy@2 { + compatible = "bcm5461a"; + reg = <2>; + txc-rxc-delay-disable; }; }; ethernet@6200 { device_type = "network"; - compatible = "tsi-ethernet"; + compatible = "tsi109-ethernet", "tsi108-ethernet"; #address-cells = <1>; #size-cells = <0>; reg = <6000 200>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupt-parent = < &/tsi109@c0000000/pic@7400 >; + interrupt-parent = <&MPIC>; interrupts = <10 2>; + mdio-handle = <&MDIO>; phy-handle = <&PHY1>; }; ethernet@6600 { device_type = "network"; - compatible = "tsi-ethernet"; + compatible = "tsi109-ethernet", "tsi108-ethernet"; #address-cells = <1>; #size-cells = <0>; reg = <6400 200>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupt-parent = < &/tsi109@c0000000/pic@7400 >; + interrupt-parent = <&MPIC>; interrupts = <11 2>; + mdio-handle = <&MDIO>; phy-handle = <&PHY2>; }; @@ -110,7 +113,7 @@ virtual-reg = <c0007808>; clock-frequency = <3F9C6000>; current-speed = <1c200>; - interrupt-parent = < &/tsi109@c0000000/pic@7400 >; + interrupt-parent = <&MPIC>; interrupts = <c 2>; }; @@ -121,7 +124,7 @@ virtual-reg = <c0007c08>; clock-frequency = <3F9C6000>; current-speed = <1c200>; - interrupt-parent = < &/tsi109@c0000000/pic@7400 >; + interrupt-parent = <&MPIC>; interrupts = <d 2>; }; @@ -136,7 +139,7 @@ pci@1000 { device_type = "pci"; - compatible = "tsi109"; + compatible = "tsi109-pci", "tsi108-pci"; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; @@ -150,7 +153,7 @@ ranges = <02000000 0 40000000 40000000 0 10000000 01000000 0 00000000 7e000000 0 00010000>; clock-frequency = <7f28154>; - interrupt-parent = < &/tsi109@c0000000/pic@7400 >; + interrupt-parent = <&MPIC>; interrupts = <17 2>; interrupt-map-mask = <f800 0 0 7>; /*----------------------------------------------------+ @@ -186,13 +189,12 @@ #address-cells = <0>; #interrupt-cells = <2>; interrupts = <17 2>; - interrupt-parent = < &/tsi109@c0000000/pic@7400 >; + interrupt-parent = <&MPIC>; }; }; }; chosen { linux,stdout-path = "/tsi109@c0000000/serial@7808"; - bootargs = "console=ttyS0,115200"; }; }; diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts index 765c306ecf80..0e3d314a7158 100644 --- a/arch/powerpc/boot/dts/mpc7448hpc2.dts +++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts @@ -45,7 +45,7 @@ #address-cells = <1>; #size-cells = <1>; #interrupt-cells = <2>; - device_type = "tsi-bridge"; + device_type = "tsi108-bridge"; ranges = <00000000 c0000000 00010000>; reg = <c0000000 00010000>; bus-frequency = <0>; @@ -55,27 +55,26 @@ interrupts = <E 0>; reg = <7000 400>; device_type = "i2c"; - compatible = "tsi-i2c"; + compatible = "tsi108-i2c"; }; - mdio@6000 { + MDIO: mdio@6000 { device_type = "mdio"; - compatible = "tsi-ethernet"; + compatible = "tsi108-mdio"; + reg = <6000 50>; + #address-cells = <1>; + #size-cells = <0>; - phy8: ethernet-phy@6000 { + phy8: ethernet-phy@8 { interrupt-parent = <&mpic>; interrupts = <2 1>; - reg = <6000 50>; - phy-id = <8>; - device_type = "ethernet-phy"; + reg = <8>; }; - phy9: ethernet-phy@6400 { + phy9: ethernet-phy@9 { interrupt-parent = <&mpic>; interrupts = <2 1>; - reg = <6000 50>; - phy-id = <9>; - device_type = "ethernet-phy"; + reg = <9>; }; }; @@ -83,12 +82,12 @@ ethernet@6200 { #size-cells = <0>; device_type = "network"; - model = "TSI-ETH"; - compatible = "tsi-ethernet"; + compatible = "tsi108-ethernet"; reg = <6000 200>; address = [ 00 06 D2 00 00 01 ]; interrupts = <10 2>; interrupt-parent = <&mpic>; + mdio-handle = <&MDIO>; phy-handle = <&phy8>; }; @@ -96,12 +95,12 @@ #address-cells = <1>; #size-cells = <0>; device_type = "network"; - model = "TSI-ETH"; - compatible = "tsi-ethernet"; + compatible = "tsi108-ethernet"; reg = <6400 200>; address = [ 00 06 D2 00 00 02 ]; interrupts = <11 2>; interrupt-parent = <&mpic>; + mdio-handle = <&MDIO>; phy-handle = <&phy9>; }; @@ -135,7 +134,7 @@ big-endian; }; pci@1000 { - compatible = "tsi10x"; + compatible = "tsi108-pci"; device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts index 423eedcf634f..1934b800278e 100644 --- a/arch/powerpc/boot/dts/mpc8272ads.dts +++ b/arch/powerpc/boot/dts/mpc8272ads.dts @@ -14,12 +14,10 @@ compatible = "MPC8260ADS"; #address-cells = <1>; #size-cells = <1>; - linux,phandle = <100>; cpus { #address-cells = <1>; #size-cells = <0>; - linux,phandle = <200>; PowerPC,8272@0 { device_type = "cpu"; @@ -32,12 +30,10 @@ bus-frequency = <0>; clock-frequency = <0>; 32-bit; - linux,phandle = <201>; }; }; - interrupt-controller@f8200000 { - linux,phandle = <f8200000>; + pci_pic: interrupt-controller@f8200000 { #address-cells = <0>; #interrupt-cells = <2>; interrupt-controller; @@ -47,15 +43,13 @@ }; memory { device_type = "memory"; - linux,phandle = <300>; reg = <00000000 4000000 f4500000 00000020>; }; chosen { name = "chosen"; linux,platform = <0>; - interrupt-controller = <10c00>; - linux,phandle = <400>; + interrupt-controller = <&Cpm_pic>; }; soc8272@f0000000 { @@ -70,20 +64,17 @@ device_type = "mdio"; compatible = "fs_enet"; reg = <0 0>; - linux,phandle = <24520>; #address-cells = <1>; #size-cells = <0>; - ethernet-phy@0 { - linux,phandle = <2452000>; - interrupt-parent = <10c00>; + phy0:ethernet-phy@0 { + interrupt-parent = <&Cpm_pic>; interrupts = <17 4>; reg = <0>; bitbang = [ 12 12 13 02 02 01 ]; device_type = "ethernet-phy"; }; - ethernet-phy@1 { - linux,phandle = <2452001>; - interrupt-parent = <10c00>; + phy1:ethernet-phy@1 { + interrupt-parent = <&Cpm_pic>; interrupts = <17 4>; bitbang = [ 12 12 13 02 02 01 ]; reg = <3>; @@ -101,8 +92,8 @@ reg = <11300 20 8400 100 11380 30>; mac-address = [ 00 11 2F 99 43 54 ]; interrupts = <20 2>; - interrupt-parent = <10c00>; - phy-handle = <2452000>; + interrupt-parent = <&Cpm_pic>; + phy-handle = <&Phy0>; rx-clock = <13>; tx-clock = <12>; }; @@ -115,14 +106,13 @@ reg = <11320 20 8500 100 113b0 30>; mac-address = [ 00 11 2F 99 44 54 ]; interrupts = <21 2>; - interrupt-parent = <10c00>; - phy-handle = <2452001>; + interrupt-parent = <&Cpm_pic>; + phy-handle = <&Phy1>; rx-clock = <17>; tx-clock = <18>; }; cpm@f0000000 { - linux,phandle = <f0000000>; #address-cells = <1>; #size-cells = <1>; #interrupt-cells = <2>; @@ -142,7 +132,7 @@ reg = <11a00 20 8000 100>; current-speed = <1c200>; interrupts = <28 2>; - interrupt-parent = <10c00>; + interrupt-parent = <&Cpm_pic>; clock-setup = <0 00ffffff>; rx-clock = <1>; tx-clock = <1>; @@ -156,15 +146,14 @@ reg = <11a60 20 8300 100>; current-speed = <1c200>; interrupts = <2b 2>; - interrupt-parent = <10c00>; + interrupt-parent = <&Cpm_pic>; clock-setup = <1b ffffff00>; rx-clock = <4>; tx-clock = <4>; }; }; - interrupt-controller@10c00 { - linux,phandle = <10c00>; + cpm_pic:interrupt-controller@10c00 { #address-cells = <0>; #interrupt-cells = <2>; interrupt-controller; @@ -174,7 +163,6 @@ compatible = "CPM2"; }; pci@0500 { - linux,phandle = <0500>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; @@ -202,7 +190,7 @@ c000 0 0 2 f8200000 43 8 c000 0 0 3 f8200000 40 8 c000 0 0 4 f8200000 41 8>; - interrupt-parent = <10c00>; + interrupt-parent = <&Cpm_pic>; interrupts = <14 8>; bus-range = <0 0>; ranges = <02000000 0 80000000 80000000 0 40000000 @@ -216,7 +204,7 @@ compatible = "talitos"; reg = <30000 10000>; interrupts = <b 2>; - interrupt-parent = <10c00>; + interrupt-parent = <&Cpm_pic>; num-channels = <4>; channel-fifo-len = <18>; exec-units-mask = <0000007e>; diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts index 112dd5198fe2..4fc0c4d34aa8 100644 --- a/arch/powerpc/boot/dts/mpc832x_mds.dts +++ b/arch/powerpc/boot/dts/mpc832x_mds.dts @@ -272,7 +272,13 @@ reg = <2200 200>; interrupts = <22>; interrupt-parent = < &qeic >; - mac-address = [ 00 04 9f 00 23 23 ]; + /* + * mac-address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + mac-address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock = <19>; tx-clock = <1a>; phy-handle = < &phy3 >; @@ -287,7 +293,13 @@ reg = <3000 200>; interrupts = <23>; interrupt-parent = < &qeic >; - mac-address = [ 00 11 22 33 44 55 ]; + /* + * mac-address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + mac-address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock = <17>; tx-clock = <18>; phy-handle = < &phy4 >; diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts index be4c35784e49..447c03ffabbc 100644 --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts @@ -231,7 +231,13 @@ reg = <3000 200>; interrupts = <21>; interrupt-parent = <&qeic>; - mac-address = [ 00 04 9f ef 03 02 ]; + /* + * mac-address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + mac-address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock = <20>; tx-clock = <13>; phy-handle = <&phy00>; @@ -246,7 +252,13 @@ reg = <2200 200>; interrupts = <22>; interrupt-parent = <&qeic>; - mac-address = [ 00 04 9f ef 03 01 ]; + /* + * mac-address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + mac-address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock = <19>; tx-clock = <1a>; phy-handle = <&phy04>; diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index db0d00303275..ae9bca575453 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -131,6 +131,11 @@ model = "TSEC"; compatible = "gianfar"; reg = <24000 1000>; + /* + * address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <20 8 21 8 22 8>; @@ -145,6 +150,11 @@ model = "TSEC"; compatible = "gianfar"; reg = <25000 1000>; + /* + * address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <23 8 24 8 25 8>; diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts index df773fafe9d1..310e877826b4 100644 --- a/arch/powerpc/boot/dts/mpc834x_mds.dts +++ b/arch/powerpc/boot/dts/mpc834x_mds.dts @@ -136,6 +136,11 @@ model = "TSEC"; compatible = "gianfar"; reg = <24000 1000>; + /* + * address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <20 8 21 8 22 8>; @@ -150,6 +155,11 @@ model = "TSEC"; compatible = "gianfar"; reg = <25000 1000>; + /* + * address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <23 8 24 8 25 8>; diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts index 38c8594df3a4..1e914f31dd92 100644 --- a/arch/powerpc/boot/dts/mpc836x_mds.dts +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts @@ -301,7 +301,13 @@ reg = <2000 200>; interrupts = <20>; interrupt-parent = < &qeic >; - mac-address = [ 00 04 9f 00 23 23 ]; + /* + * mac-address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + mac-address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock = <0>; tx-clock = <19>; phy-handle = < &phy0 >; @@ -317,7 +323,13 @@ reg = <3000 200>; interrupts = <21>; interrupt-parent = < &qeic >; - mac-address = [ 00 11 22 33 44 55 ]; + /* + * mac-address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + mac-address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock = <0>; tx-clock = <14>; phy-handle = < &phy1 >; diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts index d91e81c009f5..364a969f5c2f 100644 --- a/arch/powerpc/boot/dts/mpc8540ads.dts +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -52,7 +52,7 @@ compatible = "fsl,8540-memory-controller"; reg = <2000 1000>; interrupt-parent = <&mpic>; - interrupts = <2 2>; + interrupts = <12 2>; }; l2-cache-controller@20000 { @@ -61,14 +61,14 @@ cache-line-size = <20>; // 32 bytes cache-size = <40000>; // L2, 256K interrupt-parent = <&mpic>; - interrupts = <0 2>; + interrupts = <10 2>; }; i2c@3000 { device_type = "i2c"; compatible = "fsl-i2c"; reg = <3000 100>; - interrupts = <1b 2>; + interrupts = <2b 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -81,19 +81,19 @@ reg = <24520 20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; - interrupts = <35 1>; + interrupts = <5 1>; reg = <0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; - interrupts = <35 1>; + interrupts = <5 1>; reg = <1>; device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; - interrupts = <37 1>; + interrupts = <7 1>; reg = <3>; device_type = "ethernet-phy"; }; @@ -106,9 +106,14 @@ model = "TSEC"; compatible = "gianfar"; reg = <24000 1000>; - address = [ 00 E0 0C 00 73 00 ]; - local-mac-address = [ 00 E0 0C 00 73 00 ]; - interrupts = <d 2 e 2 12 2>; + /* + * address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <1d 2 1e 2 22 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; }; @@ -120,9 +125,14 @@ model = "TSEC"; compatible = "gianfar"; reg = <25000 1000>; - address = [ 00 E0 0C 00 73 01 ]; - local-mac-address = [ 00 E0 0C 00 73 01 ]; - interrupts = <13 2 14 2 18 2>; + /* + * address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <23 2 24 2 28 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; }; @@ -134,9 +144,14 @@ model = "FEC"; compatible = "gianfar"; reg = <26000 1000>; - address = [ 00 E0 0C 00 73 02 ]; - local-mac-address = [ 00 E0 0C 00 73 02 ]; - interrupts = <19 2>; + /* + * address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2>; interrupt-parent = <&mpic>; phy-handle = <&phy3>; }; @@ -146,7 +161,7 @@ compatible = "ns16550"; reg = <4500 100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <1a 2>; + interrupts = <2a 2>; interrupt-parent = <&mpic>; }; @@ -155,7 +170,7 @@ compatible = "ns16550"; reg = <4600 100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <1a 2>; + interrupts = <2a 2>; interrupt-parent = <&mpic>; }; pci@8000 { @@ -163,78 +178,78 @@ interrupt-map = < /* IDSEL 0x02 */ - 1000 0 0 1 &mpic 31 1 - 1000 0 0 2 &mpic 32 1 - 1000 0 0 3 &mpic 33 1 - 1000 0 0 4 &mpic 34 1 + 1000 0 0 1 &mpic 1 1 + 1000 0 0 2 &mpic 2 1 + 1000 0 0 3 &mpic 3 1 + 1000 0 0 4 &mpic 4 1 /* IDSEL 0x03 */ - 1800 0 0 1 &mpic 34 1 - 1800 0 0 2 &mpic 31 1 - 1800 0 0 3 &mpic 32 1 - 1800 0 0 4 &mpic 33 1 + 1800 0 0 1 &mpic 4 1 + 1800 0 0 2 &mpic 1 1 + 1800 0 0 3 &mpic 2 1 + 1800 0 0 4 &mpic 3 1 /* IDSEL 0x04 */ - 2000 0 0 1 &mpic 33 1 - 2000 0 0 2 &mpic 34 1 - 2000 0 0 3 &mpic 31 1 - 2000 0 0 4 &mpic 32 1 + 2000 0 0 1 &mpic 3 1 + 2000 0 0 2 &mpic 4 1 + 2000 0 0 3 &mpic 1 1 + 2000 0 0 4 &mpic 2 1 /* IDSEL 0x05 */ - 2800 0 0 1 &mpic 32 1 - 2800 0 0 2 &mpic 33 1 - 2800 0 0 3 &mpic 34 1 - 2800 0 0 4 &mpic 31 1 + 2800 0 0 1 &mpic 2 1 + 2800 0 0 2 &mpic 3 1 + 2800 0 0 3 &mpic 4 1 + 2800 0 0 4 &mpic 1 1 /* IDSEL 0x0c */ - 6000 0 0 1 &mpic 31 1 - 6000 0 0 2 &mpic 32 1 - 6000 0 0 3 &mpic 33 1 - 6000 0 0 4 &mpic 34 1 + 6000 0 0 1 &mpic 1 1 + 6000 0 0 2 &mpic 2 1 + 6000 0 0 3 &mpic 3 1 + 6000 0 0 4 &mpic 4 1 /* IDSEL 0x0d */ - 6800 0 0 1 &mpic 34 1 - 6800 0 0 2 &mpic 31 1 - 6800 0 0 3 &mpic 32 1 - 6800 0 0 4 &mpic 33 1 + 6800 0 0 1 &mpic 4 1 + 6800 0 0 2 &mpic 1 1 + 6800 0 0 3 &mpic 2 1 + 6800 0 0 4 &mpic 3 1 /* IDSEL 0x0e */ - 7000 0 0 1 &mpic 33 1 - 7000 0 0 2 &mpic 34 1 - 7000 0 0 3 &mpic 31 1 - 7000 0 0 4 &mpic 32 1 + 7000 0 0 1 &mpic 3 1 + 7000 0 0 2 &mpic 4 1 + 7000 0 0 3 &mpic 1 1 + 7000 0 0 4 &mpic 2 1 /* IDSEL 0x0f */ - 7800 0 0 1 &mpic 32 1 - 7800 0 0 2 &mpic 33 1 - 7800 0 0 3 &mpic 34 1 - 7800 0 0 4 &mpic 31 1 + 7800 0 0 1 &mpic 2 1 + 7800 0 0 2 &mpic 3 1 + 7800 0 0 3 &mpic 4 1 + 7800 0 0 4 &mpic 1 1 /* IDSEL 0x12 */ - 9000 0 0 1 &mpic 31 1 - 9000 0 0 2 &mpic 32 1 - 9000 0 0 3 &mpic 33 1 - 9000 0 0 4 &mpic 34 1 + 9000 0 0 1 &mpic 1 1 + 9000 0 0 2 &mpic 2 1 + 9000 0 0 3 &mpic 3 1 + 9000 0 0 4 &mpic 4 1 /* IDSEL 0x13 */ - 9800 0 0 1 &mpic 34 1 - 9800 0 0 2 &mpic 31 1 - 9800 0 0 3 &mpic 32 1 - 9800 0 0 4 &mpic 33 1 + 9800 0 0 1 &mpic 4 1 + 9800 0 0 2 &mpic 1 1 + 9800 0 0 3 &mpic 2 1 + 9800 0 0 4 &mpic 3 1 /* IDSEL 0x14 */ - a000 0 0 1 &mpic 33 1 - a000 0 0 2 &mpic 34 1 - a000 0 0 3 &mpic 31 1 - a000 0 0 4 &mpic 32 1 + a000 0 0 1 &mpic 3 1 + a000 0 0 2 &mpic 4 1 + a000 0 0 3 &mpic 1 1 + a000 0 0 4 &mpic 2 1 /* IDSEL 0x15 */ - a800 0 0 1 &mpic 32 1 - a800 0 0 2 &mpic 33 1 - a800 0 0 3 &mpic 34 1 - a800 0 0 4 &mpic 31 1>; + a800 0 0 1 &mpic 2 1 + a800 0 0 2 &mpic 3 1 + a800 0 0 3 &mpic 4 1 + a800 0 0 4 &mpic 1 1>; interrupt-parent = <&mpic>; - interrupts = <08 2>; + interrupts = <18 2>; bus-range = <0 0>; ranges = <02000000 0 80000000 80000000 0 20000000 01000000 0 00000000 e2000000 0 00100000>; diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts index 4f2c3af2e052..070206fffe88 100644 --- a/arch/powerpc/boot/dts/mpc8541cds.dts +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -52,7 +52,7 @@ compatible = "fsl,8541-memory-controller"; reg = <2000 1000>; interrupt-parent = <&mpic>; - interrupts = <2 2>; + interrupts = <12 2>; }; l2-cache-controller@20000 { @@ -61,14 +61,14 @@ cache-line-size = <20>; // 32 bytes cache-size = <40000>; // L2, 256K interrupt-parent = <&mpic>; - interrupts = <0 2>; + interrupts = <10 2>; }; i2c@3000 { device_type = "i2c"; compatible = "fsl-i2c"; reg = <3000 100>; - interrupts = <1b 2>; + interrupts = <2b 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -81,13 +81,13 @@ reg = <24520 20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; - interrupts = <35 0>; + interrupts = <5 1>; reg = <0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; - interrupts = <35 0>; + interrupts = <5 1>; reg = <1>; device_type = "ethernet-phy"; }; @@ -100,8 +100,8 @@ model = "TSEC"; compatible = "gianfar"; reg = <24000 1000>; - local-mac-address = [ 00 E0 0C 00 73 00 ]; - interrupts = <d 2 e 2 12 2>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <1d 2 1e 2 22 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; }; @@ -113,8 +113,8 @@ model = "TSEC"; compatible = "gianfar"; reg = <25000 1000>; - local-mac-address = [ 00 E0 0C 00 73 01 ]; - interrupts = <13 2 14 2 18 2>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <23 2 24 2 28 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; }; @@ -124,7 +124,7 @@ compatible = "ns16550"; reg = <4500 100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <1a 2>; + interrupts = <2a 2>; interrupt-parent = <&mpic>; }; @@ -133,7 +133,7 @@ compatible = "ns16550"; reg = <4600 100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <1a 2>; + interrupts = <2a 2>; interrupt-parent = <&mpic>; }; @@ -142,49 +142,49 @@ interrupt-map = < /* IDSEL 0x10 */ - 08000 0 0 1 &mpic 30 1 - 08000 0 0 2 &mpic 31 1 - 08000 0 0 3 &mpic 32 1 - 08000 0 0 4 &mpic 33 1 + 08000 0 0 1 &mpic 0 1 + 08000 0 0 2 &mpic 1 1 + 08000 0 0 3 &mpic 2 1 + 08000 0 0 4 &mpic 3 1 /* IDSEL 0x11 */ - 08800 0 0 1 &mpic 30 1 - 08800 0 0 2 &mpic 31 1 - 08800 0 0 3 &mpic 32 1 - 08800 0 0 4 &mpic 33 1 + 08800 0 0 1 &mpic 0 1 + 08800 0 0 2 &mpic 1 1 + 08800 0 0 3 &mpic 2 1 + 08800 0 0 4 &mpic 3 1 /* IDSEL 0x12 (Slot 1) */ - 09000 0 0 1 &mpic 30 1 - 09000 0 0 2 &mpic 31 1 - 09000 0 0 3 &mpic 32 1 - 09000 0 0 4 &mpic 33 1 + 09000 0 0 1 &mpic 0 1 + 09000 0 0 2 &mpic 1 1 + 09000 0 0 3 &mpic 2 1 + 09000 0 0 4 &mpic 3 1 /* IDSEL 0x13 (Slot 2) */ - 09800 0 0 1 &mpic 31 1 - 09800 0 0 2 &mpic 32 1 - 09800 0 0 3 &mpic 33 1 - 09800 0 0 4 &mpic 30 1 + 09800 0 0 1 &mpic 1 1 + 09800 0 0 2 &mpic 2 1 + 09800 0 0 3 &mpic 3 1 + 09800 0 0 4 &mpic 0 1 /* IDSEL 0x14 (Slot 3) */ - 0a000 0 0 1 &mpic 32 1 - 0a000 0 0 2 &mpic 33 1 - 0a000 0 0 3 &mpic 30 1 - 0a000 0 0 4 &mpic 31 1 + 0a000 0 0 1 &mpic 2 1 + 0a000 0 0 2 &mpic 3 1 + 0a000 0 0 3 &mpic 0 1 + 0a000 0 0 4 &mpic 1 1 /* IDSEL 0x15 (Slot 4) */ - 0a800 0 0 1 &mpic 33 1 - 0a800 0 0 2 &mpic 30 1 - 0a800 0 0 3 &mpic 31 1 - 0a800 0 0 4 &mpic 32 1 + 0a800 0 0 1 &mpic 3 1 + 0a800 0 0 2 &mpic 0 1 + 0a800 0 0 3 &mpic 1 1 + 0a800 0 0 4 &mpic 2 1 /* Bus 1 (Tundra Bridge) */ /* IDSEL 0x12 (ISA bridge) */ - 19000 0 0 1 &mpic 30 1 - 19000 0 0 2 &mpic 31 1 - 19000 0 0 3 &mpic 32 1 - 19000 0 0 4 &mpic 33 1>; + 19000 0 0 1 &mpic 0 1 + 19000 0 0 2 &mpic 1 1 + 19000 0 0 3 &mpic 2 1 + 19000 0 0 4 &mpic 3 1>; interrupt-parent = <&mpic>; - interrupts = <08 2>; + interrupts = <18 2>; bus-range = <0 0>; ranges = <02000000 0 80000000 80000000 0 20000000 01000000 0 00000000 e2000000 0 00100000>; @@ -216,12 +216,12 @@ interrupt-map = < /* IDSEL 0x15 */ - a800 0 0 1 &mpic 3b 1 - a800 0 0 2 &mpic 3b 1 - a800 0 0 3 &mpic 3b 1 - a800 0 0 4 &mpic 3b 1>; + a800 0 0 1 &mpic b 1 + a800 0 0 2 &mpic b 1 + a800 0 0 3 &mpic b 1 + a800 0 0 4 &mpic b 1>; interrupt-parent = <&mpic>; - interrupts = <09 2>; + interrupts = <19 2>; bus-range = <0 0>; ranges = <02000000 0 a0000000 a0000000 0 20000000 01000000 0 00000000 e3000000 0 00100000>; diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts index 3033599e74e8..828592592460 100644 --- a/arch/powerpc/boot/dts/mpc8544ds.dts +++ b/arch/powerpc/boot/dts/mpc8544ds.dts @@ -52,7 +52,7 @@ compatible = "fsl,8544-memory-controller"; reg = <2000 1000>; interrupt-parent = <&mpic>; - interrupts = <2 2>; + interrupts = <12 2>; }; l2-cache-controller@20000 { @@ -61,14 +61,14 @@ cache-line-size = <20>; // 32 bytes cache-size = <40000>; // L2, 256K interrupt-parent = <&mpic>; - interrupts = <0 2>; + interrupts = <10 2>; }; i2c@3000 { device_type = "i2c"; compatible = "fsl-i2c"; reg = <3000 100>; - interrupts = <1b 2>; + interrupts = <2b 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -81,13 +81,13 @@ reg = <24520 20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; - interrupts = <3a 1>; + interrupts = <a 1>; reg = <0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; - interrupts = <3a 1>; + interrupts = <a 1>; reg = <1>; device_type = "ethernet-phy"; }; @@ -101,7 +101,7 @@ compatible = "gianfar"; reg = <24000 1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <d 2 e 2 12 2>; + interrupts = <1d 2 1e 2 22 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; }; @@ -114,7 +114,7 @@ compatible = "gianfar"; reg = <26000 1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <f 2 10 2 11 2>; + interrupts = <1f 2 20 2 21 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; }; @@ -124,7 +124,7 @@ compatible = "ns16550"; reg = <4500 100>; clock-frequency = <0>; - interrupts = <1a 2>; + interrupts = <2a 2>; interrupt-parent = <&mpic>; }; @@ -133,7 +133,7 @@ compatible = "ns16550"; reg = <4600 100>; clock-frequency = <0>; - interrupts = <1a 2>; + interrupts = <2a 2>; interrupt-parent = <&mpic>; }; diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index ad96381033c0..9d0b84b66cd4 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -52,7 +52,7 @@ compatible = "fsl,8548-memory-controller"; reg = <2000 1000>; interrupt-parent = <&mpic>; - interrupts = <2 2>; + interrupts = <12 2>; }; l2-cache-controller@20000 { @@ -61,14 +61,14 @@ cache-line-size = <20>; // 32 bytes cache-size = <80000>; // L2, 512K interrupt-parent = <&mpic>; - interrupts = <0 2>; + interrupts = <10 2>; }; i2c@3000 { device_type = "i2c"; compatible = "fsl-i2c"; reg = <3000 100>; - interrupts = <1b 2>; + interrupts = <2b 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -81,25 +81,25 @@ reg = <24520 20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; - interrupts = <35 0>; + interrupts = <5 1>; reg = <0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; - interrupts = <35 0>; + interrupts = <5 1>; reg = <1>; device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&mpic>; - interrupts = <35 0>; + interrupts = <5 1>; reg = <2>; device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; - interrupts = <35 0>; + interrupts = <5 1>; reg = <3>; device_type = "ethernet-phy"; }; @@ -112,8 +112,8 @@ model = "eTSEC"; compatible = "gianfar"; reg = <24000 1000>; - local-mac-address = [ 00 E0 0C 00 73 00 ]; - interrupts = <d 2 e 2 12 2>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <1d 2 1e 2 22 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; }; @@ -125,8 +125,8 @@ model = "eTSEC"; compatible = "gianfar"; reg = <25000 1000>; - local-mac-address = [ 00 E0 0C 00 73 01 ]; - interrupts = <13 2 14 2 18 2>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <23 2 24 2 28 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; }; @@ -139,8 +139,8 @@ model = "eTSEC"; compatible = "gianfar"; reg = <26000 1000>; - local-mac-address = [ 00 E0 0C 00 73 02 ]; - interrupts = <f 2 10 2 11 2>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <1f 2 20 2 21 2>; interrupt-parent = <&mpic>; phy-handle = <&phy2>; }; @@ -152,8 +152,8 @@ model = "eTSEC"; compatible = "gianfar"; reg = <27000 1000>; - local-mac-address = [ 00 E0 0C 00 73 03 ]; - interrupts = <15 2 16 2 17 2>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <25 2 26 2 27 2>; interrupt-parent = <&mpic>; phy-handle = <&phy3>; }; @@ -164,7 +164,7 @@ compatible = "ns16550"; reg = <4500 100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <1a 2>; + interrupts = <2a 2>; interrupt-parent = <&mpic>; }; @@ -173,58 +173,64 @@ compatible = "ns16550"; reg = <4600 100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <1a 2>; + interrupts = <2a 2>; interrupt-parent = <&mpic>; }; + global-utilities@e0000 { //global utilities reg + compatible = "fsl,mpc8548-guts"; + reg = <e0000 1000>; + fsl,has-rstcr; + }; + pci1: pci@8000 { interrupt-map-mask = <1f800 0 0 7>; interrupt-map = < /* IDSEL 0x10 */ - 08000 0 0 1 &mpic 30 1 - 08000 0 0 2 &mpic 31 1 - 08000 0 0 3 &mpic 32 1 - 08000 0 0 4 &mpic 33 1 + 08000 0 0 1 &mpic 0 1 + 08000 0 0 2 &mpic 1 1 + 08000 0 0 3 &mpic 2 1 + 08000 0 0 4 &mpic 3 1 /* IDSEL 0x11 */ - 08800 0 0 1 &mpic 30 1 - 08800 0 0 2 &mpic 31 1 - 08800 0 0 3 &mpic 32 1 - 08800 0 0 4 &mpic 33 1 + 08800 0 0 1 &mpic 0 1 + 08800 0 0 2 &mpic 1 1 + 08800 0 0 3 &mpic 2 1 + 08800 0 0 4 &mpic 3 1 /* IDSEL 0x12 (Slot 1) */ - 09000 0 0 1 &mpic 30 1 - 09000 0 0 2 &mpic 31 1 - 09000 0 0 3 &mpic 32 1 - 09000 0 0 4 &mpic 33 1 + 09000 0 0 1 &mpic 0 1 + 09000 0 0 2 &mpic 1 1 + 09000 0 0 3 &mpic 2 1 + 09000 0 0 4 &mpic 3 1 /* IDSEL 0x13 (Slot 2) */ - 09800 0 0 1 &mpic 31 1 - 09800 0 0 2 &mpic 32 1 - 09800 0 0 3 &mpic 33 1 - 09800 0 0 4 &mpic 30 1 + 09800 0 0 1 &mpic 1 1 + 09800 0 0 2 &mpic 2 1 + 09800 0 0 3 &mpic 3 1 + 09800 0 0 4 &mpic 0 1 /* IDSEL 0x14 (Slot 3) */ - 0a000 0 0 1 &mpic 32 1 - 0a000 0 0 2 &mpic 33 1 - 0a000 0 0 3 &mpic 30 1 - 0a000 0 0 4 &mpic 31 1 + 0a000 0 0 1 &mpic 2 1 + 0a000 0 0 2 &mpic 3 1 + 0a000 0 0 3 &mpic 0 1 + 0a000 0 0 4 &mpic 1 1 /* IDSEL 0x15 (Slot 4) */ - 0a800 0 0 1 &mpic 33 1 - 0a800 0 0 2 &mpic 30 1 - 0a800 0 0 3 &mpic 31 1 - 0a800 0 0 4 &mpic 32 1 + 0a800 0 0 1 &mpic 3 1 + 0a800 0 0 2 &mpic 0 1 + 0a800 0 0 3 &mpic 1 1 + 0a800 0 0 4 &mpic 2 1 /* Bus 1 (Tundra Bridge) */ /* IDSEL 0x12 (ISA bridge) */ - 19000 0 0 1 &mpic 30 1 - 19000 0 0 2 &mpic 31 1 - 19000 0 0 3 &mpic 32 1 - 19000 0 0 4 &mpic 33 1>; + 19000 0 0 1 &mpic 0 1 + 19000 0 0 2 &mpic 1 1 + 19000 0 0 3 &mpic 2 1 + 19000 0 0 4 &mpic 3 1>; interrupt-parent = <&mpic>; - interrupts = <08 2>; + interrupts = <18 2>; bus-range = <0 0>; ranges = <02000000 0 80000000 80000000 0 20000000 01000000 0 00000000 e2000000 0 00100000>; @@ -256,12 +262,12 @@ interrupt-map = < /* IDSEL 0x15 */ - a800 0 0 1 &mpic 3b 1 - a800 0 0 2 &mpic 3b 1 - a800 0 0 3 &mpic 3b 1 - a800 0 0 4 &mpic 3b 1>; + a800 0 0 1 &mpic b 1 + a800 0 0 2 &mpic b 1 + a800 0 0 3 &mpic b 1 + a800 0 0 4 &mpic b 1>; interrupt-parent = <&mpic>; - interrupts = <09 2>; + interrupts = <19 2>; bus-range = <0 0>; ranges = <02000000 0 a0000000 a0000000 0 20000000 01000000 0 00000000 e3000000 0 00100000>; diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts index 951ed92f1154..17e45d9a382a 100644 --- a/arch/powerpc/boot/dts/mpc8555cds.dts +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -52,7 +52,7 @@ compatible = "fsl,8555-memory-controller"; reg = <2000 1000>; interrupt-parent = <&mpic>; - interrupts = <2 2>; + interrupts = <12 2>; }; l2-cache-controller@20000 { @@ -61,14 +61,14 @@ cache-line-size = <20>; // 32 bytes cache-size = <40000>; // L2, 256K interrupt-parent = <&mpic>; - interrupts = <0 2>; + interrupts = <10 2>; }; i2c@3000 { device_type = "i2c"; compatible = "fsl-i2c"; reg = <3000 100>; - interrupts = <1b 2>; + interrupts = <2b 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -81,13 +81,13 @@ reg = <24520 20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; - interrupts = <35 0>; + interrupts = <5 1>; reg = <0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; - interrupts = <35 0>; + interrupts = <5 1>; reg = <1>; device_type = "ethernet-phy"; }; @@ -100,8 +100,8 @@ model = "TSEC"; compatible = "gianfar"; reg = <24000 1000>; - local-mac-address = [ 00 E0 0C 00 73 00 ]; - interrupts = <0d 2 0e 2 12 2>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <1d 2 1e 2 22 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; }; @@ -113,8 +113,8 @@ model = "TSEC"; compatible = "gianfar"; reg = <25000 1000>; - local-mac-address = [ 00 E0 0C 00 73 01 ]; - interrupts = <13 2 14 2 18 2>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <23 2 24 2 28 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; }; @@ -124,7 +124,7 @@ compatible = "ns16550"; reg = <4500 100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <1a 2>; + interrupts = <2a 2>; interrupt-parent = <&mpic>; }; @@ -133,7 +133,7 @@ compatible = "ns16550"; reg = <4600 100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <1a 2>; + interrupts = <2a 2>; interrupt-parent = <&mpic>; }; @@ -142,49 +142,49 @@ interrupt-map = < /* IDSEL 0x10 */ - 08000 0 0 1 &mpic 30 1 - 08000 0 0 2 &mpic 31 1 - 08000 0 0 3 &mpic 32 1 - 08000 0 0 4 &mpic 33 1 + 08000 0 0 1 &mpic 0 1 + 08000 0 0 2 &mpic 1 1 + 08000 0 0 3 &mpic 2 1 + 08000 0 0 4 &mpic 3 1 /* IDSEL 0x11 */ - 08800 0 0 1 &mpic 30 1 - 08800 0 0 2 &mpic 31 1 - 08800 0 0 3 &mpic 32 1 - 08800 0 0 4 &mpic 33 1 + 08800 0 0 1 &mpic 0 1 + 08800 0 0 2 &mpic 1 1 + 08800 0 0 3 &mpic 2 1 + 08800 0 0 4 &mpic 3 1 /* IDSEL 0x12 (Slot 1) */ - 09000 0 0 1 &mpic 30 1 - 09000 0 0 2 &mpic 31 1 - 09000 0 0 3 &mpic 32 1 - 09000 0 0 4 &mpic 33 1 + 09000 0 0 1 &mpic 0 1 + 09000 0 0 2 &mpic 1 1 + 09000 0 0 3 &mpic 2 1 + 09000 0 0 4 &mpic 3 1 /* IDSEL 0x13 (Slot 2) */ - 09800 0 0 1 &mpic 31 1 - 09800 0 0 2 &mpic 32 1 - 09800 0 0 3 &mpic 33 1 - 09800 0 0 4 &mpic 30 1 + 09800 0 0 1 &mpic 1 1 + 09800 0 0 2 &mpic 2 1 + 09800 0 0 3 &mpic 3 1 + 09800 0 0 4 &mpic 0 1 /* IDSEL 0x14 (Slot 3) */ - 0a000 0 0 1 &mpic 32 1 - 0a000 0 0 2 &mpic 33 1 - 0a000 0 0 3 &mpic 30 1 - 0a000 0 0 4 &mpic 31 1 + 0a000 0 0 1 &mpic 2 1 + 0a000 0 0 2 &mpic 3 1 + 0a000 0 0 3 &mpic 0 1 + 0a000 0 0 4 &mpic 1 1 /* IDSEL 0x15 (Slot 4) */ - 0a800 0 0 1 &mpic 33 1 - 0a800 0 0 2 &mpic 30 1 - 0a800 0 0 3 &mpic 31 1 - 0a800 0 0 4 &mpic 32 1 + 0a800 0 0 1 &mpic 3 1 + 0a800 0 0 2 &mpic 0 1 + 0a800 0 0 3 &mpic 1 1 + 0a800 0 0 4 &mpic 2 1 /* Bus 1 (Tundra Bridge) */ /* IDSEL 0x12 (ISA bridge) */ - 19000 0 0 1 &mpic 30 1 - 19000 0 0 2 &mpic 31 1 - 19000 0 0 3 &mpic 32 1 - 19000 0 0 4 &mpic 33 1>; + 19000 0 0 1 &mpic 0 1 + 19000 0 0 2 &mpic 1 1 + 19000 0 0 3 &mpic 2 1 + 19000 0 0 4 &mpic 3 1>; interrupt-parent = <&mpic>; - interrupts = <08 2>; + interrupts = <18 2>; bus-range = <0 0>; ranges = <02000000 0 80000000 80000000 0 20000000 01000000 0 00000000 e2000000 0 00100000>; @@ -216,12 +216,12 @@ interrupt-map = < /* IDSEL 0x15 */ - a800 0 0 1 &mpic 3b 1 - a800 0 0 2 &mpic 3b 1 - a800 0 0 3 &mpic 3b 1 - a800 0 0 4 &mpic 3b 1>; + a800 0 0 1 &mpic b 1 + a800 0 0 2 &mpic b 1 + a800 0 0 3 &mpic b 1 + a800 0 0 4 &mpic b 1>; interrupt-parent = <&mpic>; - interrupts = <09 2>; + interrupts = <19 2>; bus-range = <0 0>; ranges = <02000000 0 a0000000 a0000000 0 20000000 01000000 0 00000000 e3000000 0 00100000>; diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts index 80682152b0cf..21ccaaa27993 100644 --- a/arch/powerpc/boot/dts/mpc8560ads.dts +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -52,7 +52,7 @@ compatible = "fsl,8540-memory-controller"; reg = <2000 1000>; interrupt-parent = <&mpic>; - interrupts = <2 2>; + interrupts = <12 2>; }; l2-cache-controller@20000 { @@ -61,7 +61,7 @@ cache-line-size = <20>; // 32 bytes cache-size = <40000>; // L2, 256K interrupt-parent = <&mpic>; - interrupts = <0 2>; + interrupts = <10 2>; }; mdio@24520 { @@ -72,25 +72,25 @@ #size-cells = <0>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; - interrupts = <35 1>; + interrupts = <5 1>; reg = <0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; - interrupts = <35 1>; + interrupts = <5 1>; reg = <1>; device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&mpic>; - interrupts = <37 1>; + interrupts = <7 1>; reg = <2>; device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; - interrupts = <37 1>; + interrupts = <7 1>; reg = <3>; device_type = "ethernet-phy"; }; @@ -101,8 +101,14 @@ model = "TSEC"; compatible = "gianfar"; reg = <24000 1000>; - address = [ 00 00 0C 00 00 FD ]; - interrupts = <d 2 e 2 12 2>; + /* + * address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <1d 2 1e 2 22 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; }; @@ -114,8 +120,14 @@ model = "TSEC"; compatible = "gianfar"; reg = <25000 1000>; - address = [ 00 00 0C 00 01 FD ]; - interrupts = <13 2 14 2 18 2>; + /* + * address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <23 2 24 2 28 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; }; @@ -132,79 +144,79 @@ interrupt-map = < /* IDSEL 0x2 */ - 1000 0 0 1 &mpic 31 1 - 1000 0 0 2 &mpic 32 1 - 1000 0 0 3 &mpic 33 1 - 1000 0 0 4 &mpic 34 1 + 1000 0 0 1 &mpic 1 1 + 1000 0 0 2 &mpic 2 1 + 1000 0 0 3 &mpic 3 1 + 1000 0 0 4 &mpic 4 1 /* IDSEL 0x3 */ - 1800 0 0 1 &mpic 34 1 - 1800 0 0 2 &mpic 31 1 - 1800 0 0 3 &mpic 32 1 - 1800 0 0 4 &mpic 33 1 + 1800 0 0 1 &mpic 4 1 + 1800 0 0 2 &mpic 1 1 + 1800 0 0 3 &mpic 2 1 + 1800 0 0 4 &mpic 3 1 /* IDSEL 0x4 */ - 2000 0 0 1 &mpic 33 1 - 2000 0 0 2 &mpic 34 1 - 2000 0 0 3 &mpic 31 1 - 2000 0 0 4 &mpic 32 1 + 2000 0 0 1 &mpic 3 1 + 2000 0 0 2 &mpic 4 1 + 2000 0 0 3 &mpic 1 1 + 2000 0 0 4 &mpic 2 1 /* IDSEL 0x5 */ - 2800 0 0 1 &mpic 32 1 - 2800 0 0 2 &mpic 33 1 - 2800 0 0 3 &mpic 34 1 - 2800 0 0 4 &mpic 31 1 + 2800 0 0 1 &mpic 2 1 + 2800 0 0 2 &mpic 3 1 + 2800 0 0 3 &mpic 4 1 + 2800 0 0 4 &mpic 1 1 /* IDSEL 12 */ - 6000 0 0 1 &mpic 31 1 - 6000 0 0 2 &mpic 32 1 - 6000 0 0 3 &mpic 33 1 - 6000 0 0 4 &mpic 34 1 + 6000 0 0 1 &mpic 1 1 + 6000 0 0 2 &mpic 2 1 + 6000 0 0 3 &mpic 3 1 + 6000 0 0 4 &mpic 4 1 /* IDSEL 13 */ - 6800 0 0 1 &mpic 34 1 - 6800 0 0 2 &mpic 31 1 - 6800 0 0 3 &mpic 32 1 - 6800 0 0 4 &mpic 33 1 + 6800 0 0 1 &mpic 4 1 + 6800 0 0 2 &mpic 1 1 + 6800 0 0 3 &mpic 2 1 + 6800 0 0 4 &mpic 3 1 /* IDSEL 14*/ - 7000 0 0 1 &mpic 33 1 - 7000 0 0 2 &mpic 34 1 - 7000 0 0 3 &mpic 31 1 - 7000 0 0 4 &mpic 32 1 + 7000 0 0 1 &mpic 3 1 + 7000 0 0 2 &mpic 4 1 + 7000 0 0 3 &mpic 1 1 + 7000 0 0 4 &mpic 2 1 /* IDSEL 15 */ - 7800 0 0 1 &mpic 32 1 - 7800 0 0 2 &mpic 33 1 - 7800 0 0 3 &mpic 34 1 - 7800 0 0 4 &mpic 31 1 + 7800 0 0 1 &mpic 2 1 + 7800 0 0 2 &mpic 3 1 + 7800 0 0 3 &mpic 4 1 + 7800 0 0 4 &mpic 1 1 /* IDSEL 18 */ - 9000 0 0 1 &mpic 31 1 - 9000 0 0 2 &mpic 32 1 - 9000 0 0 3 &mpic 33 1 - 9000 0 0 4 &mpic 34 1 + 9000 0 0 1 &mpic 1 1 + 9000 0 0 2 &mpic 2 1 + 9000 0 0 3 &mpic 3 1 + 9000 0 0 4 &mpic 4 1 /* IDSEL 19 */ - 9800 0 0 1 &mpic 34 1 - 9800 0 0 2 &mpic 31 1 - 9800 0 0 3 &mpic 32 1 - 9800 0 0 4 &mpic 33 1 + 9800 0 0 1 &mpic 4 1 + 9800 0 0 2 &mpic 1 1 + 9800 0 0 3 &mpic 2 1 + 9800 0 0 4 &mpic 3 1 /* IDSEL 20 */ - a000 0 0 1 &mpic 33 1 - a000 0 0 2 &mpic 34 1 - a000 0 0 3 &mpic 31 1 - a000 0 0 4 &mpic 32 1 + a000 0 0 1 &mpic 3 1 + a000 0 0 2 &mpic 4 1 + a000 0 0 3 &mpic 1 1 + a000 0 0 4 &mpic 2 1 /* IDSEL 21 */ - a800 0 0 1 &mpic 32 1 - a800 0 0 2 &mpic 33 1 - a800 0 0 3 &mpic 34 1 - a800 0 0 4 &mpic 31 1>; + a800 0 0 1 &mpic 2 1 + a800 0 0 2 &mpic 3 1 + a800 0 0 3 &mpic 4 1 + a800 0 0 4 &mpic 1 1>; interrupt-parent = <&mpic>; - interrupts = <8 0>; + interrupts = <18 2>; bus-range = <0 0>; ranges = <02000000 0 80000000 80000000 0 20000000 01000000 0 00000000 e2000000 0 01000000>; @@ -234,7 +246,7 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - interrupts = <1e 0>; + interrupts = <2e 2>; interrupt-parent = <&mpic>; reg = <90c00 80>; built-in; @@ -275,7 +287,13 @@ model = "FCC"; device-id = <2>; reg = <91320 20 88500 100 913a0 30>; - mac-address = [ 00 00 0C 00 02 FD ]; + /* + * mac-address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + mac-address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; clock-setup = <ff00ffff 250000>; rx-clock = <15>; tx-clock = <16>; @@ -290,7 +308,13 @@ model = "FCC"; device-id = <3>; reg = <91340 20 88600 100 913d0 30>; - mac-address = [ 00 00 0C 00 03 FD ]; + /* + * mac-address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + mac-address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; clock-setup = <ffff00ff 3700>; rx-clock = <17>; tx-clock = <18>; diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index a123ec9456bc..6bb18f2807a8 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -61,7 +61,7 @@ compatible = "fsl,8568-memory-controller"; reg = <2000 1000>; interrupt-parent = <&mpic>; - interrupts = <2 2>; + interrupts = <12 2>; }; l2-cache-controller@20000 { @@ -70,14 +70,14 @@ cache-line-size = <20>; // 32 bytes cache-size = <80000>; // L2, 512K interrupt-parent = <&mpic>; - interrupts = <0 2>; + interrupts = <10 2>; }; i2c@3000 { device_type = "i2c"; compatible = "fsl-i2c"; reg = <3000 100>; - interrupts = <1b 2>; + interrupts = <2b 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -86,7 +86,7 @@ device_type = "i2c"; compatible = "fsl-i2c"; reg = <3100 100>; - interrupts = <1b 2>; + interrupts = <2b 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -99,25 +99,25 @@ reg = <24520 20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; - interrupts = <31 1>; + interrupts = <1 1>; reg = <0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; - interrupts = <32 1>; + interrupts = <2 1>; reg = <1>; device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&mpic>; - interrupts = <31 1>; + interrupts = <1 1>; reg = <2>; device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; - interrupts = <32 1>; + interrupts = <2 1>; reg = <3>; device_type = "ethernet-phy"; }; @@ -130,8 +130,14 @@ model = "eTSEC"; compatible = "gianfar"; reg = <24000 1000>; + /* + * mac-address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <d 2 e 2 12 2>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <1d 2 1e 2 22 2>; interrupt-parent = <&mpic>; phy-handle = <&phy2>; }; @@ -143,8 +149,14 @@ model = "eTSEC"; compatible = "gianfar"; reg = <25000 1000>; - mac-address = [ 00 00 00 00 00 00]; - interrupts = <13 2 14 2 18 2>; + /* + * mac-address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + mac-address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <23 2 24 2 28 2>; interrupt-parent = <&mpic>; phy-handle = <&phy3>; }; @@ -154,7 +166,7 @@ compatible = "ns16550"; reg = <4500 100>; clock-frequency = <0>; - interrupts = <1a 2>; + interrupts = <2a 2>; interrupt-parent = <&mpic>; }; @@ -163,7 +175,7 @@ compatible = "ns16550"; reg = <4600 100>; clock-frequency = <0>; - interrupts = <1a 2>; + interrupts = <2a 2>; interrupt-parent = <&mpic>; }; @@ -172,7 +184,7 @@ model = "SEC2"; compatible = "talitos"; reg = <30000 f000>; - interrupts = <1d 2>; + interrupts = <2d 2>; interrupt-parent = <&mpic>; num-channels = <4>; channel-fifo-len = <18>; @@ -300,7 +312,13 @@ reg = <2000 200>; interrupts = <20>; interrupt-parent = <&qeic>; - mac-address = [ 00 04 9f 00 23 23 ]; + /* + * mac-address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + mac-address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock = <0>; tx-clock = <19>; phy-handle = <&qe_phy0>; @@ -316,7 +334,13 @@ reg = <3000 200>; interrupts = <21>; interrupt-parent = <&qeic>; - mac-address = [ 00 11 22 33 44 55 ]; + /* + * mac-address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + mac-address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock = <0>; tx-clock = <14>; phy-handle = <&qe_phy1>; @@ -335,25 +359,25 @@ * gianfar's MDIO bus */ qe_phy0: ethernet-phy@00 { interrupt-parent = <&mpic>; - interrupts = <31 1>; + interrupts = <1 1>; reg = <0>; device_type = "ethernet-phy"; }; qe_phy1: ethernet-phy@01 { interrupt-parent = <&mpic>; - interrupts = <32 1>; + interrupts = <2 1>; reg = <1>; device_type = "ethernet-phy"; }; qe_phy2: ethernet-phy@02 { interrupt-parent = <&mpic>; - interrupts = <31 1>; + interrupts = <1 1>; reg = <2>; device_type = "ethernet-phy"; }; qe_phy3: ethernet-phy@03 { interrupt-parent = <&mpic>; - interrupts = <32 1>; + interrupts = <2 1>; reg = <3>; device_type = "ethernet-phy"; }; @@ -367,7 +391,7 @@ reg = <80 80>; built-in; big-endian; - interrupts = <1e 2 1e 2>; //high:30 low:30 + interrupts = <2e 2 2e 2>; //high:30 low:30 interrupt-parent = <&mpic>; }; diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index 260b264c869e..db56a02b748f 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -56,8 +56,12 @@ #size-cells = <1>; #interrupt-cells = <2>; device_type = "soc"; - ranges = <0 f8000000 00100000>; - reg = <f8000000 00100000>; // CCSRBAR 1M + ranges = <00001000 f8001000 000ff000 + 80000000 80000000 20000000 + e2000000 e2000000 00100000 + a0000000 a0000000 20000000 + e3000000 e3000000 00100000>; + reg = <f8000000 00001000>; // CCSRBAR bus-frequency = <0>; i2c@3000 { @@ -86,25 +90,25 @@ reg = <24520 20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; - interrupts = <4a 1>; + interrupts = <a 1>; reg = <0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; - interrupts = <4a 1>; + interrupts = <a 1>; reg = <1>; device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&mpic>; - interrupts = <4a 1>; + interrupts = <a 1>; reg = <2>; device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; - interrupts = <4a 1>; + interrupts = <a 1>; reg = <3>; device_type = "ethernet-phy"; }; @@ -117,7 +121,13 @@ model = "TSEC"; compatible = "gianfar"; reg = <24000 1000>; - mac-address = [ 00 E0 0C 00 73 00 ]; + /* + * mac-address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + mac-address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <1d 2 1e 2 22 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; @@ -130,7 +140,13 @@ model = "TSEC"; compatible = "gianfar"; reg = <25000 1000>; - mac-address = [ 00 E0 0C 00 73 01 ]; + /* + * mac-address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + mac-address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <23 2 24 2 28 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; @@ -143,7 +159,13 @@ model = "TSEC"; compatible = "gianfar"; reg = <26000 1000>; - mac-address = [ 00 E0 0C 00 02 FD ]; + /* + * mac-address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + mac-address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <1F 2 20 2 21 2>; interrupt-parent = <&mpic>; phy-handle = <&phy2>; @@ -156,7 +178,13 @@ model = "TSEC"; compatible = "gianfar"; reg = <27000 1000>; - mac-address = [ 00 E0 0C 00 03 FD ]; + /* + * mac-address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + mac-address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <25 2 26 2 27 2>; interrupt-parent = <&mpic>; phy-handle = <&phy3>; @@ -186,7 +214,7 @@ #size-cells = <2>; #address-cells = <3>; reg = <8000 1000>; - bus-range = <0 fe>; + bus-range = <0 ff>; ranges = <02000000 0 80000000 80000000 0 20000000 01000000 0 00000000 e2000000 0 00100000>; clock-frequency = <1fca055>; @@ -285,17 +313,84 @@ f800 0 0 3 &i8259 0 0 f800 0 0 4 &i8259 0 0 >; - i8259: i8259@4d0 { - clock-frequency = <0>; - interrupt-controller; - device_type = "interrupt-controller"; - #address-cells = <0>; - #interrupt-cells = <2>; - built-in; - compatible = "chrp,iic"; - big-endian; - interrupts = <49 2>; - interrupt-parent = <&mpic>; + uli1575@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <02000000 0 80000000 + 02000000 0 80000000 + 0 20000000 + 01000000 0 00000000 + 01000000 0 00000000 + 0 00100000>; + + pci_bridge@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <02000000 0 80000000 + 02000000 0 80000000 + 0 20000000 + 01000000 0 00000000 + 01000000 0 00000000 + 0 00100000>; + + isa@1e { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <f000 0 0 0 0>; + ranges = <1 0 01000000 0 0 + 00001000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + reg = <1 20 2 + 1 a0 2 + 1 4d0 2>; + clock-frequency = <0>; + interrupt-controller; + device_type = "interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <2>; + built-in; + compatible = "chrp,iic"; + interrupts = <9 2>; + interrupt-parent = + <&mpic>; + }; + + i8042@60 { + #size-cells = <0>; + #address-cells = <1>; + reg = <1 60 1 1 64 1>; + interrupts = <1 3 c 3>; + interrupt-parent = + <&i8259>; + + keyboard@0 { + reg = <0>; + compatible = "pnpPNP,303"; + }; + + mouse@1 { + reg = <1>; + compatible = "pnpPNP,f03"; + }; + }; + + rtc@70 { + compatible = + "pnpPNP,b00"; + reg = <1 70 2>; + }; + + gpio@400 { + reg = <1 400 80>; + }; + }; + }; }; }; @@ -316,10 +411,10 @@ interrupt-map-mask = <f800 0 0 7>; interrupt-map = < /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 44 1 - 0000 0 0 2 &mpic 45 1 - 0000 0 0 3 &mpic 46 1 - 0000 0 0 4 &mpic 47 1 + 0000 0 0 1 &mpic 4 1 + 0000 0 0 2 &mpic 5 1 + 0000 0 0 3 &mpic 6 1 + 0000 0 0 4 &mpic 7 1 >; }; diff --git a/arch/powerpc/boot/dts/mpc866ads.dts b/arch/powerpc/boot/dts/mpc866ads.dts index c0d06fd12927..e5e7726ddb03 100644 --- a/arch/powerpc/boot/dts/mpc866ads.dts +++ b/arch/powerpc/boot/dts/mpc866ads.dts @@ -15,12 +15,10 @@ compatible = "mpc8xx"; #address-cells = <1>; #size-cells = <1>; - linux,phandle = <100>; cpus { #address-cells = <1>; #size-cells = <0>; - linux,phandle = <200>; PowerPC,866@0 { device_type = "cpu"; @@ -34,14 +32,12 @@ clock-frequency = <0>; 32-bit; interrupts = <f 2>; // decrementer interrupt - interrupt-parent = <ff000000>; - linux,phandle = <201>; + interrupt-parent = <&Mpc8xx_pic>; }; }; memory { device_type = "memory"; - linux,phandle = <300>; reg = <00000000 800000>; }; @@ -57,11 +53,9 @@ device_type = "mdio"; compatible = "fs_enet"; reg = <e80 8>; - linux,phandle = <e80>; #address-cells = <1>; #size-cells = <0>; - ethernet-phy@f { - linux,phandle = <e800f>; + phy: ethernet-phy@f { reg = <f>; device_type = "ethernet-phy"; }; @@ -75,12 +69,11 @@ reg = <e00 188>; mac-address = [ 00 00 0C 00 01 FD ]; interrupts = <3 1>; - interrupt-parent = <ff000000>; - phy-handle = <e800f>; + interrupt-parent = <&Mpc8xx_pic>; + phy-handle = <&Phy>; }; - pic@ff000000 { - linux,phandle = <ff000000>; + mpc8xx_pic: pic@ff000000 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; @@ -91,7 +84,6 @@ }; cpm@ff000000 { - linux,phandle = <ff000000>; #address-cells = <1>; #size-cells = <1>; #interrupt-cells = <2>; @@ -102,15 +94,14 @@ command-proc = <9c0>; brg-frequency = <0>; interrupts = <0 2>; // cpm error interrupt - interrupt-parent = <930>; + interrupt-parent = <&Cpm_pic>; - pic@930 { - linux,phandle = <930>; + cpm_pic: pic@930 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; interrupts = <5 2 0 2>; - interrupt-parent = <ff000000>; + interrupt-parent = <&Mpc8xx_pic>; reg = <930 20>; built-in; device_type = "cpm-pic"; @@ -128,7 +119,7 @@ tx-clock = <1>; current-speed = <0>; interrupts = <4 3>; - interrupt-parent = <930>; + interrupt-parent = <&Cpm_pic>; }; smc@a90 { @@ -142,7 +133,7 @@ tx-clock = <2>; current-speed = <0>; interrupts = <3 3>; - interrupt-parent = <930>; + interrupt-parent = <&Cpm_pic>; }; scc@a00 { @@ -153,7 +144,7 @@ reg = <a00 18 3c00 80>; mac-address = [ 00 00 0C 00 03 FD ]; interrupts = <1e 3>; - interrupt-parent = <930>; + interrupt-parent = <&Cpm_pic>; }; }; }; diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts index 110bf6170603..dc7ab9c80611 100644 --- a/arch/powerpc/boot/dts/mpc885ads.dts +++ b/arch/powerpc/boot/dts/mpc885ads.dts @@ -15,12 +15,10 @@ compatible = "mpc8xx"; #address-cells = <1>; #size-cells = <1>; - linux,phandle = <100>; cpus { #address-cells = <1>; #size-cells = <0>; - linux,phandle = <200>; PowerPC,885@0 { device_type = "cpu"; @@ -34,14 +32,12 @@ clock-frequency = <0>; 32-bit; interrupts = <f 2>; // decrementer interrupt - interrupt-parent = <ff000000>; - linux,phandle = <201>; + interrupt-parent = <&Mpc8xx_pic>; }; }; memory { device_type = "memory"; - linux,phandle = <300>; reg = <00000000 800000>; }; @@ -57,21 +53,17 @@ device_type = "mdio"; compatible = "fs_enet"; reg = <e80 8>; - linux,phandle = <e80>; #address-cells = <1>; #size-cells = <0>; - ethernet-phy@0 { - linux,phandle = <e8000>; + Phy0: ethernet-phy@0 { reg = <0>; device_type = "ethernet-phy"; }; - ethernet-phy@1 { - linux,phandle = <e8001>; + Phy1: ethernet-phy@1 { reg = <1>; device_type = "ethernet-phy"; }; - ethernet-phy@2 { - linux,phandle = <e8002>; + Phy2: ethernet-phy@2 { reg = <2>; device_type = "ethernet-phy"; }; @@ -85,8 +77,8 @@ reg = <e00 188>; mac-address = [ 00 00 0C 00 01 FD ]; interrupts = <3 1>; - interrupt-parent = <ff000000>; - phy-handle = <e8000>; + interrupt-parent = <&Mpc8xx_pic>; + phy-handle = <&Phy1>; }; fec@1e00 { @@ -97,12 +89,11 @@ reg = <1e00 188>; mac-address = [ 00 00 0C 00 02 FD ]; interrupts = <7 1>; - interrupt-parent = <ff000000>; - phy-handle = <e8001>; + interrupt-parent = <&Mpc8xx_pic>; + phy-handle = <&Phy2>; }; - pic@ff000000 { - linux,phandle = <ff000000>; + Mpc8xx_pic: pic@ff000000 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; @@ -112,8 +103,18 @@ compatible = "CPM"; }; + pcmcia@0080 { + #address-cells = <3>; + #interrupt-cells = <1>; + #size-cells = <2>; + compatible = "fsl,pq-pcmcia"; + device_type = "pcmcia"; + reg = <80 80>; + interrupt-parent = <&Mpc8xx_pic>; + interrupts = <d 1>; + }; + cpm@ff000000 { - linux,phandle = <ff000000>; #address-cells = <1>; #size-cells = <1>; #interrupt-cells = <2>; @@ -124,15 +125,14 @@ command-proc = <9c0>; brg-frequency = <0>; interrupts = <0 2>; // cpm error interrupt - interrupt-parent = <930>; + interrupt-parent = <&Cpm_pic>; - pic@930 { - linux,phandle = <930>; + Cpm_pic: pic@930 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; interrupts = <5 2 0 2>; - interrupt-parent = <ff000000>; + interrupt-parent = <&Mpc8xx_pic>; reg = <930 20>; built-in; device_type = "cpm-pic"; @@ -150,7 +150,7 @@ tx-clock = <1>; current-speed = <0>; interrupts = <4 3>; - interrupt-parent = <930>; + interrupt-parent = <&Cpm_pic>; }; smc@a90 { @@ -164,7 +164,7 @@ tx-clock = <2>; current-speed = <0>; interrupts = <3 3>; - interrupt-parent = <930>; + interrupt-parent = <&Cpm_pic>; }; scc@a40 { @@ -175,8 +175,8 @@ reg = <a40 18 3e00 80>; mac-address = [ 00 00 0C 00 03 FD ]; interrupts = <1c 3>; - interrupt-parent = <930>; - phy-handle = <e8002>; + interrupt-parent = <&Cpm_pic>; + phy-handle = <&Phy2>; }; }; }; diff --git a/arch/powerpc/boot/dts/prpmc2800.dts b/arch/powerpc/boot/dts/prpmc2800.dts index 568965a022b9..699d0df574d5 100644 --- a/arch/powerpc/boot/dts/prpmc2800.dts +++ b/arch/powerpc/boot/dts/prpmc2800.dts @@ -309,7 +309,7 @@ }; chosen { - bootargs = "ip=on console=ttyMM0"; + bootargs = "ip=on"; linux,stdout-path = "/mv64x60@f1000000/mpsc@8000"; }; }; diff --git a/arch/powerpc/boot/dts/ps3.dts b/arch/powerpc/boot/dts/ps3.dts new file mode 100644 index 000000000000..379ded282d5e --- /dev/null +++ b/arch/powerpc/boot/dts/ps3.dts @@ -0,0 +1,68 @@ +/* + * PS3 Game Console device tree. + * + * Copyright (C) 2007 Sony Computer Entertainment Inc. + * Copyright 2007 Sony Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/ { + model = "SonyPS3"; + compatible = "sony,ps3"; + #size-cells = <2>; + #address-cells = <2>; + + chosen { + }; + + /* + * We'll get the size of the bootmem block from lv1 after startup, + * so we'll put a null entry here. + */ + + memory { + device_type = "memory"; + reg = <0 0 0 0>; + }; + + /* + * The boot cpu is always zero for PS3. + * + * dtc expects a clock-frequency and timebase-frequency entries, so + * we'll put a null entries here. These will be initialized after + * startup with data from lv1. + * + * Seems the only way currently to indicate a processor has multiple + * threads is with an ibm,ppc-interrupt-server#s entry. We'll put one + * here so we can bring up both of ours. See smp_setup_cpu_maps(). + */ + + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu@0 { + device_type = "cpu"; + reg = <0>; + ibm,ppc-interrupt-server#s = <0 1>; + clock-frequency = <0>; + timebase-frequency = <0>; + i-cache-size = <8000>; + d-cache-size = <8000>; + i-cache-line-size = <80>; + d-cache-line-size = <80>; + }; + }; +}; |