1 files changed, 0 insertions, 74 deletions

diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index ef9448a907c6..8d28f2932c3b 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -38,7 +38,6 @@
 #include "powernv.h"
 #include "pci.h"
 
-static DEFINE_MUTEX(p2p_mutex);
 static DEFINE_MUTEX(tunnel_mutex);
 
 int pnv_pci_get_slot_id(struct device_node *np, uint64_t *id)
@@ -861,79 +860,6 @@ void pnv_pci_dma_bus_setup(struct pci_bus *bus)
 	}
 }
 
-int pnv_pci_set_p2p(struct pci_dev *initiator, struct pci_dev *target, u64 desc)
-{
-	struct pci_controller *hose;
-	struct pnv_phb *phb_init, *phb_target;
-	struct pnv_ioda_pe *pe_init;
-	int rc;
-
-	if (!opal_check_token(OPAL_PCI_SET_P2P))
-		return -ENXIO;
-
-	hose = pci_bus_to_host(initiator->bus);
-	phb_init = hose->private_data;
-
-	hose = pci_bus_to_host(target->bus);
-	phb_target = hose->private_data;
-
-	pe_init = pnv_ioda_get_pe(initiator);
-	if (!pe_init)
-		return -ENODEV;
-
-	/*
-	 * Configuring the initiator's PHB requires to adjust its
-	 * TVE#1 setting. Since the same device can be an initiator
-	 * several times for different target devices, we need to keep
-	 * a reference count to know when we can restore the default
-	 * bypass setting on its TVE#1 when disabling. Opal is not
-	 * tracking PE states, so we add a reference count on the PE
-	 * in linux.
-	 *
-	 * For the target, the configuration is per PHB, so we keep a
-	 * target reference count on the PHB.
-	 */
-	mutex_lock(&p2p_mutex);
-
-	if (desc & OPAL_PCI_P2P_ENABLE) {
-		/* always go to opal to validate the configuration */
-		rc = opal_pci_set_p2p(phb_init->opal_id, phb_target->opal_id,
-				      desc, pe_init->pe_number);
-
-		if (rc != OPAL_SUCCESS) {
-			rc = -EIO;
-			goto out;
-		}
-
-		pe_init->p2p_initiator_count++;
-		phb_target->p2p_target_count++;
-	} else {
-		if (!pe_init->p2p_initiator_count ||
-			!phb_target->p2p_target_count) {
-			rc = -EINVAL;
-			goto out;
-		}
-
-		if (--pe_init->p2p_initiator_count == 0)
-			pnv_pci_ioda2_set_bypass(pe_init, true);
-
-		if (--phb_target->p2p_target_count == 0) {
-			rc = opal_pci_set_p2p(phb_init->opal_id,
-					      phb_target->opal_id, desc,
-					      pe_init->pe_number);
-			if (rc != OPAL_SUCCESS) {
-				rc = -EIO;
-				goto out;
-			}
-		}
-	}
-	rc = 0;
-out:
-	mutex_unlock(&p2p_mutex);
-	return rc;
-}
-EXPORT_SYMBOL_GPL(pnv_pci_set_p2p);
-
 struct device_node *pnv_pci_get_phb_node(struct pci_dev *dev)
 {
 	struct pci_controller *hose = pci_bus_to_host(dev->bus);