diff options
Diffstat (limited to 'arch/powerpc/platforms/wsp/scom_smp.c')
| -rw-r--r-- | arch/powerpc/platforms/wsp/scom_smp.c | 434 |
1 files changed, 0 insertions, 434 deletions
diff --git a/arch/powerpc/platforms/wsp/scom_smp.c b/arch/powerpc/platforms/wsp/scom_smp.c deleted file mode 100644 index 268bc899c1f7..000000000000 --- a/arch/powerpc/platforms/wsp/scom_smp.c +++ /dev/null @@ -1,434 +0,0 @@ -/* - * SCOM support for A2 platforms - * - * Copyright 2007-2011 Benjamin Herrenschmidt, David Gibson, - * Michael Ellerman, IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/cpumask.h> -#include <linux/io.h> -#include <linux/of.h> -#include <linux/spinlock.h> -#include <linux/types.h> - -#include <asm/cputhreads.h> -#include <asm/reg_a2.h> -#include <asm/scom.h> -#include <asm/udbg.h> - -#include "wsp.h" - -#define SCOM_RAMC 0x2a /* Ram Command */ -#define SCOM_RAMC_TGT1_EXT 0x80000000 -#define SCOM_RAMC_SRC1_EXT 0x40000000 -#define SCOM_RAMC_SRC2_EXT 0x20000000 -#define SCOM_RAMC_SRC3_EXT 0x10000000 -#define SCOM_RAMC_ENABLE 0x00080000 -#define SCOM_RAMC_THREADSEL 0x00060000 -#define SCOM_RAMC_EXECUTE 0x00010000 -#define SCOM_RAMC_MSR_OVERRIDE 0x00008000 -#define SCOM_RAMC_MSR_PR 0x00004000 -#define SCOM_RAMC_MSR_GS 0x00002000 -#define SCOM_RAMC_FORCE 0x00001000 -#define SCOM_RAMC_FLUSH 0x00000800 -#define SCOM_RAMC_INTERRUPT 0x00000004 -#define SCOM_RAMC_ERROR 0x00000002 -#define SCOM_RAMC_DONE 0x00000001 -#define SCOM_RAMI 0x29 /* Ram Instruction */ -#define SCOM_RAMIC 0x28 /* Ram Instruction and Command */ -#define SCOM_RAMIC_INSN 0xffffffff00000000 -#define SCOM_RAMD 0x2d /* Ram Data */ -#define SCOM_RAMDH 0x2e /* Ram Data High */ -#define SCOM_RAMDL 0x2f /* Ram Data Low */ -#define SCOM_PCCR0 0x33 /* PC Configuration Register 0 */ -#define SCOM_PCCR0_ENABLE_DEBUG 0x80000000 -#define SCOM_PCCR0_ENABLE_RAM 0x40000000 -#define SCOM_THRCTL 0x30 /* Thread Control and Status */ -#define SCOM_THRCTL_T0_STOP 0x80000000 -#define SCOM_THRCTL_T1_STOP 0x40000000 -#define SCOM_THRCTL_T2_STOP 0x20000000 -#define SCOM_THRCTL_T3_STOP 0x10000000 -#define SCOM_THRCTL_T0_STEP 0x08000000 -#define SCOM_THRCTL_T1_STEP 0x04000000 -#define SCOM_THRCTL_T2_STEP 0x02000000 -#define SCOM_THRCTL_T3_STEP 0x01000000 -#define SCOM_THRCTL_T0_RUN 0x00800000 -#define SCOM_THRCTL_T1_RUN 0x00400000 -#define SCOM_THRCTL_T2_RUN 0x00200000 -#define SCOM_THRCTL_T3_RUN 0x00100000 -#define SCOM_THRCTL_T0_PM 0x00080000 -#define SCOM_THRCTL_T1_PM 0x00040000 -#define SCOM_THRCTL_T2_PM 0x00020000 -#define SCOM_THRCTL_T3_PM 0x00010000 -#define SCOM_THRCTL_T0_UDE 0x00008000 -#define SCOM_THRCTL_T1_UDE 0x00004000 -#define SCOM_THRCTL_T2_UDE 0x00002000 -#define SCOM_THRCTL_T3_UDE 0x00001000 -#define SCOM_THRCTL_ASYNC_DIS 0x00000800 -#define SCOM_THRCTL_TB_DIS 0x00000400 -#define SCOM_THRCTL_DEC_DIS 0x00000200 -#define SCOM_THRCTL_AND 0x31 /* Thread Control and Status */ -#define SCOM_THRCTL_OR 0x32 /* Thread Control and Status */ - - -static DEFINE_PER_CPU(scom_map_t, scom_ptrs); - -static scom_map_t get_scom(int cpu, struct device_node *np, int *first_thread) -{ - scom_map_t scom = per_cpu(scom_ptrs, cpu); - int tcpu; - - if (scom_map_ok(scom)) { - *first_thread = 0; - return scom; - } - - *first_thread = 1; - - scom = scom_map_device(np, 0); - - for (tcpu = cpu_first_thread_sibling(cpu); - tcpu <= cpu_last_thread_sibling(cpu); tcpu++) - per_cpu(scom_ptrs, tcpu) = scom; - - /* Hack: for the boot core, this will actually get called on - * the second thread up, not the first so our test above will - * set first_thread incorrectly. */ - if (cpu_first_thread_sibling(cpu) == 0) - *first_thread = 0; - - return scom; -} - -static int a2_scom_ram(scom_map_t scom, int thread, u32 insn, int extmask) -{ - u64 cmd, mask, val; - int n = 0; - - cmd = ((u64)insn << 32) | (((u64)extmask & 0xf) << 28) - | ((u64)thread << 17) | SCOM_RAMC_ENABLE | SCOM_RAMC_EXECUTE; - mask = SCOM_RAMC_DONE | SCOM_RAMC_INTERRUPT | SCOM_RAMC_ERROR; - - scom_write(scom, SCOM_RAMIC, cmd); - - for (;;) { - if (scom_read(scom, SCOM_RAMC, &val) != 0) { - pr_err("SCOM error on instruction 0x%08x, thread %d\n", - insn, thread); - return -1; - } - if (val & mask) - break; - pr_devel("Waiting on RAMC = 0x%llx\n", val); - if (++n == 3) { - pr_err("RAMC timeout on instruction 0x%08x, thread %d\n", - insn, thread); - return -1; - } - } - - if (val & SCOM_RAMC_INTERRUPT) { - pr_err("RAMC interrupt on instruction 0x%08x, thread %d\n", - insn, thread); - return -SCOM_RAMC_INTERRUPT; - } - - if (val & SCOM_RAMC_ERROR) { - pr_err("RAMC error on instruction 0x%08x, thread %d\n", - insn, thread); - return -SCOM_RAMC_ERROR; - } - - return 0; -} - -static int a2_scom_getgpr(scom_map_t scom, int thread, int gpr, int alt, - u64 *out_gpr) -{ - int rc; - - /* or rN, rN, rN */ - u32 insn = 0x7c000378 | (gpr << 21) | (gpr << 16) | (gpr << 11); - rc = a2_scom_ram(scom, thread, insn, alt ? 0xf : 0x0); - if (rc) - return rc; - - return scom_read(scom, SCOM_RAMD, out_gpr); -} - -static int a2_scom_getspr(scom_map_t scom, int thread, int spr, u64 *out_spr) -{ - int rc, sprhi, sprlo; - u32 insn; - - sprhi = spr >> 5; - sprlo = spr & 0x1f; - insn = 0x7c2002a6 | (sprlo << 16) | (sprhi << 11); /* mfspr r1,spr */ - - if (spr == 0x0ff0) - insn = 0x7c2000a6; /* mfmsr r1 */ - - rc = a2_scom_ram(scom, thread, insn, 0xf); - if (rc) - return rc; - return a2_scom_getgpr(scom, thread, 1, 1, out_spr); -} - -static int a2_scom_setgpr(scom_map_t scom, int thread, int gpr, - int alt, u64 val) -{ - u32 lis = 0x3c000000 | (gpr << 21); - u32 li = 0x38000000 | (gpr << 21); - u32 oris = 0x64000000 | (gpr << 21) | (gpr << 16); - u32 ori = 0x60000000 | (gpr << 21) | (gpr << 16); - u32 rldicr32 = 0x780007c6 | (gpr << 21) | (gpr << 16); - u32 highest = val >> 48; - u32 higher = (val >> 32) & 0xffff; - u32 high = (val >> 16) & 0xffff; - u32 low = val & 0xffff; - int lext = alt ? 0x8 : 0x0; - int oext = alt ? 0xf : 0x0; - int rc = 0; - - if (highest) - rc |= a2_scom_ram(scom, thread, lis | highest, lext); - - if (higher) { - if (highest) - rc |= a2_scom_ram(scom, thread, oris | higher, oext); - else - rc |= a2_scom_ram(scom, thread, li | higher, lext); - } - - if (highest || higher) - rc |= a2_scom_ram(scom, thread, rldicr32, oext); - - if (high) { - if (highest || higher) - rc |= a2_scom_ram(scom, thread, oris | high, oext); - else - rc |= a2_scom_ram(scom, thread, lis | high, lext); - } - - if (highest || higher || high) - rc |= a2_scom_ram(scom, thread, ori | low, oext); - else - rc |= a2_scom_ram(scom, thread, li | low, lext); - - return rc; -} - -static int a2_scom_setspr(scom_map_t scom, int thread, int spr, u64 val) -{ - int sprhi = spr >> 5; - int sprlo = spr & 0x1f; - /* mtspr spr, r1 */ - u32 insn = 0x7c2003a6 | (sprlo << 16) | (sprhi << 11); - - if (spr == 0x0ff0) - insn = 0x7c200124; /* mtmsr r1 */ - - if (a2_scom_setgpr(scom, thread, 1, 1, val)) - return -1; - - return a2_scom_ram(scom, thread, insn, 0xf); -} - -static int a2_scom_initial_tlb(scom_map_t scom, int thread) -{ - extern u32 a2_tlbinit_code_start[], a2_tlbinit_code_end[]; - extern u32 a2_tlbinit_after_iprot_flush[]; - extern u32 a2_tlbinit_after_linear_map[]; - u32 assoc, entries, i; - u64 epn, tlbcfg; - u32 *p; - int rc; - - /* Invalidate all entries (including iprot) */ - - rc = a2_scom_getspr(scom, thread, SPRN_TLB0CFG, &tlbcfg); - if (rc) - goto scom_fail; - entries = tlbcfg & TLBnCFG_N_ENTRY; - assoc = (tlbcfg & TLBnCFG_ASSOC) >> 24; - epn = 0; - - /* Set MMUCR2 to enable 4K, 64K, 1M, 16M and 1G pages */ - a2_scom_setspr(scom, thread, SPRN_MMUCR2, 0x000a7531); - /* Set MMUCR3 to write all thids bit to the TLB */ - a2_scom_setspr(scom, thread, SPRN_MMUCR3, 0x0000000f); - - /* Set MAS1 for 1G page size, and MAS2 to our initial EPN */ - a2_scom_setspr(scom, thread, SPRN_MAS1, MAS1_TSIZE(BOOK3E_PAGESZ_1GB)); - a2_scom_setspr(scom, thread, SPRN_MAS2, epn); - for (i = 0; i < entries; i++) { - - a2_scom_setspr(scom, thread, SPRN_MAS0, MAS0_ESEL(i % assoc)); - - /* tlbwe */ - rc = a2_scom_ram(scom, thread, 0x7c0007a4, 0); - if (rc) - goto scom_fail; - - /* Next entry is new address? */ - if((i + 1) % assoc == 0) { - epn += (1 << 30); - a2_scom_setspr(scom, thread, SPRN_MAS2, epn); - } - } - - /* Setup args for linear mapping */ - rc = a2_scom_setgpr(scom, thread, 3, 0, MAS0_TLBSEL(0)); - if (rc) - goto scom_fail; - - /* Linear mapping */ - for (p = a2_tlbinit_code_start; p < a2_tlbinit_after_linear_map; p++) { - rc = a2_scom_ram(scom, thread, *p, 0); - if (rc) - goto scom_fail; - } - - /* - * For the boot thread, between the linear mapping and the debug - * mappings there is a loop to flush iprot mappings. Ramming doesn't do - * branches, but the secondary threads don't need to be nearly as smart - * (i.e. we don't need to worry about invalidating the mapping we're - * standing on). - */ - - /* Debug mappings. Expects r11 = MAS0 from linear map (set above) */ - for (p = a2_tlbinit_after_iprot_flush; p < a2_tlbinit_code_end; p++) { - rc = a2_scom_ram(scom, thread, *p, 0); - if (rc) - goto scom_fail; - } - -scom_fail: - if (rc) - pr_err("Setting up initial TLB failed, err %d\n", rc); - - if (rc == -SCOM_RAMC_INTERRUPT) { - /* Interrupt, dump some status */ - int rc[10]; - u64 iar, srr0, srr1, esr, mas0, mas1, mas2, mas7_3, mas8, ccr2; - rc[0] = a2_scom_getspr(scom, thread, SPRN_IAR, &iar); - rc[1] = a2_scom_getspr(scom, thread, SPRN_SRR0, &srr0); - rc[2] = a2_scom_getspr(scom, thread, SPRN_SRR1, &srr1); - rc[3] = a2_scom_getspr(scom, thread, SPRN_ESR, &esr); - rc[4] = a2_scom_getspr(scom, thread, SPRN_MAS0, &mas0); - rc[5] = a2_scom_getspr(scom, thread, SPRN_MAS1, &mas1); - rc[6] = a2_scom_getspr(scom, thread, SPRN_MAS2, &mas2); - rc[7] = a2_scom_getspr(scom, thread, SPRN_MAS7_MAS3, &mas7_3); - rc[8] = a2_scom_getspr(scom, thread, SPRN_MAS8, &mas8); - rc[9] = a2_scom_getspr(scom, thread, SPRN_A2_CCR2, &ccr2); - pr_err(" -> retreived IAR =0x%llx (err %d)\n", iar, rc[0]); - pr_err(" retreived SRR0=0x%llx (err %d)\n", srr0, rc[1]); - pr_err(" retreived SRR1=0x%llx (err %d)\n", srr1, rc[2]); - pr_err(" retreived ESR =0x%llx (err %d)\n", esr, rc[3]); - pr_err(" retreived MAS0=0x%llx (err %d)\n", mas0, rc[4]); - pr_err(" retreived MAS1=0x%llx (err %d)\n", mas1, rc[5]); - pr_err(" retreived MAS2=0x%llx (err %d)\n", mas2, rc[6]); - pr_err(" retreived MS73=0x%llx (err %d)\n", mas7_3, rc[7]); - pr_err(" retreived MAS8=0x%llx (err %d)\n", mas8, rc[8]); - pr_err(" retreived CCR2=0x%llx (err %d)\n", ccr2, rc[9]); - } - - return rc; -} - -int a2_scom_startup_cpu(unsigned int lcpu, int thr_idx, struct device_node *np) -{ - u64 init_iar, init_msr, init_ccr2; - unsigned long start_here; - int rc, core_setup; - scom_map_t scom; - u64 pccr0; - - scom = get_scom(lcpu, np, &core_setup); - if (!scom) { - printk(KERN_ERR "Couldn't map SCOM for CPU%d\n", lcpu); - return -1; - } - - pr_devel("Bringing up CPU%d using SCOM...\n", lcpu); - - if (scom_read(scom, SCOM_PCCR0, &pccr0) != 0) { - printk(KERN_ERR "XSCOM failure readng PCCR0 on CPU%d\n", lcpu); - return -1; - } - scom_write(scom, SCOM_PCCR0, pccr0 | SCOM_PCCR0_ENABLE_DEBUG | - SCOM_PCCR0_ENABLE_RAM); - - /* Stop the thead with THRCTL. If we are setting up the TLB we stop all - * threads. We also disable asynchronous interrupts while RAMing. - */ - if (core_setup) - scom_write(scom, SCOM_THRCTL_OR, - SCOM_THRCTL_T0_STOP | - SCOM_THRCTL_T1_STOP | - SCOM_THRCTL_T2_STOP | - SCOM_THRCTL_T3_STOP | - SCOM_THRCTL_ASYNC_DIS); - else - scom_write(scom, SCOM_THRCTL_OR, SCOM_THRCTL_T0_STOP >> thr_idx); - - /* Flush its pipeline just in case */ - scom_write(scom, SCOM_RAMC, ((u64)thr_idx << 17) | - SCOM_RAMC_FLUSH | SCOM_RAMC_ENABLE); - - a2_scom_getspr(scom, thr_idx, SPRN_IAR, &init_iar); - a2_scom_getspr(scom, thr_idx, 0x0ff0, &init_msr); - a2_scom_getspr(scom, thr_idx, SPRN_A2_CCR2, &init_ccr2); - - /* Set MSR to MSR_CM (0x0ff0 is magic value for MSR_CM) */ - rc = a2_scom_setspr(scom, thr_idx, 0x0ff0, MSR_CM); - if (rc) { - pr_err("Failed to set MSR ! err %d\n", rc); - return rc; - } - - /* RAM in an sync/isync for the sake of it */ - a2_scom_ram(scom, thr_idx, 0x7c0004ac, 0); - a2_scom_ram(scom, thr_idx, 0x4c00012c, 0); - - if (core_setup) { - pr_devel("CPU%d is first thread in core, initializing TLB...\n", - lcpu); - rc = a2_scom_initial_tlb(scom, thr_idx); - if (rc) - goto fail; - } - - start_here = *(unsigned long *)(core_setup ? generic_secondary_smp_init - : generic_secondary_thread_init); - pr_devel("CPU%d entry point at 0x%lx...\n", lcpu, start_here); - - rc |= a2_scom_setspr(scom, thr_idx, SPRN_IAR, start_here); - rc |= a2_scom_setgpr(scom, thr_idx, 3, 0, - get_hard_smp_processor_id(lcpu)); - /* - * Tell book3e_secondary_core_init not to set up the TLB, we've - * already done that. - */ - rc |= a2_scom_setgpr(scom, thr_idx, 4, 0, 1); - - rc |= a2_scom_setspr(scom, thr_idx, SPRN_TENS, 0x1 << thr_idx); - - scom_write(scom, SCOM_RAMC, 0); - scom_write(scom, SCOM_THRCTL_AND, ~(SCOM_THRCTL_T0_STOP >> thr_idx)); - scom_write(scom, SCOM_PCCR0, pccr0); -fail: - pr_devel(" SCOM initialization %s\n", rc ? "failed" : "succeeded"); - if (rc) { - pr_err("Old IAR=0x%08llx MSR=0x%08llx CCR2=0x%08llx\n", - init_iar, init_msr, init_ccr2); - } - - return rc; -} |