diff options
Diffstat (limited to 'arch/powerpc/platforms')
45 files changed, 1609 insertions, 278 deletions
diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig index acd2fc8cf492..d664b1bce381 100644 --- a/arch/powerpc/platforms/52xx/Kconfig +++ b/arch/powerpc/platforms/52xx/Kconfig @@ -3,6 +3,7 @@ config PPC_MPC52xx depends on PPC_MULTIPLATFORM && PPC32 select FSL_SOC select PPC_CLOCK + select PPC_PCI_CHOICE config PPC_MPC5200_SIMPLE bool "Generic support for simple MPC5200 based boards" diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig index 1c8034bfa796..75eb1ede5497 100644 --- a/arch/powerpc/platforms/82xx/Kconfig +++ b/arch/powerpc/platforms/82xx/Kconfig @@ -30,6 +30,7 @@ config EP8248E select 8272 select 8260 select FSL_SOC + select PHYLIB select MDIO_BITBANG help This enables support for the Embedded Planet EP8248E board. diff --git a/arch/powerpc/platforms/82xx/ep8248e.c b/arch/powerpc/platforms/82xx/ep8248e.c index 373e993a5ed5..d5770fdf7f09 100644 --- a/arch/powerpc/platforms/82xx/ep8248e.c +++ b/arch/powerpc/platforms/82xx/ep8248e.c @@ -59,7 +59,6 @@ static void __init ep8248e_pic_init(void) of_node_put(np); } -#ifdef CONFIG_FS_ENET_MDIO_FCC static void ep8248e_set_mdc(struct mdiobb_ctrl *ctrl, int level) { if (level) @@ -165,7 +164,6 @@ static struct of_platform_driver ep8248e_mdio_driver = { .probe = ep8248e_mdio_probe, .remove = ep8248e_mdio_remove, }; -#endif struct cpm_pin { int port, pin, flags; @@ -298,9 +296,7 @@ static __initdata struct of_device_id of_bus_ids[] = { static int __init declare_of_platform_devices(void) { of_platform_bus_probe(NULL, of_bus_ids, NULL); -#ifdef CONFIG_FS_ENET_MDIO_FCC of_register_platform_driver(&ep8248e_mdio_driver); -#endif return 0; } diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index 27d9bf86de01..6159c5d4e5f1 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -2,7 +2,8 @@ menuconfig PPC_83xx bool "83xx-based boards" depends on 6xx && PPC_MULTIPLATFORM select PPC_UDBG_16550 - select PPC_INDIRECT_PCI + select PPC_PCI_CHOICE + select FSL_PCI if PCI select FSL_SOC select IPIC diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile index f331fd7dd836..ba5028e29890 100644 --- a/arch/powerpc/platforms/83xx/Makefile +++ b/arch/powerpc/platforms/83xx/Makefile @@ -2,7 +2,7 @@ # Makefile for the PowerPC 83xx linux kernel. # obj-y := misc.o usb.o -obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_SUSPEND) += suspend.o suspend-asm.o obj-$(CONFIG_MPC831x_RDB) += mpc831x_rdb.o obj-$(CONFIG_MPC832x_RDB) += mpc832x_rdb.o obj-$(CONFIG_MPC834x_MDS) += mpc834x_mds.o diff --git a/arch/powerpc/platforms/83xx/mpc831x_rdb.c b/arch/powerpc/platforms/83xx/mpc831x_rdb.c index c4db5172b27a..a428f8d1ac80 100644 --- a/arch/powerpc/platforms/83xx/mpc831x_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc831x_rdb.c @@ -19,6 +19,7 @@ #include <asm/time.h> #include <asm/ipic.h> #include <asm/udbg.h> +#include <sysdev/fsl_pci.h> #include "mpc83xx.h" diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c index 6dbc6eabcb02..dd4be4aee314 100644 --- a/arch/powerpc/platforms/83xx/mpc832x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c @@ -36,6 +36,7 @@ #include <asm/prom.h> #include <asm/udbg.h> #include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> #include <asm/qe.h> #include <asm/qe_ic.h> diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c index e7f706b624fe..f049d692d4c8 100644 --- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c @@ -27,6 +27,7 @@ #include <asm/qe.h> #include <asm/qe_ic.h> #include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> #include "mpc83xx.h" diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c index 50e8f632061c..7301d77a08ee 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_itx.c +++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c @@ -35,6 +35,7 @@ #include <asm/prom.h> #include <asm/udbg.h> #include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> #include "mpc83xx.h" diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c index 2b8a0a3f8557..30d509aa9f08 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c @@ -35,6 +35,7 @@ #include <asm/prom.h> #include <asm/udbg.h> #include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> #include "mpc83xx.h" diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c index c2e5de60c055..75b80e836576 100644 --- a/arch/powerpc/platforms/83xx/mpc836x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c @@ -42,6 +42,7 @@ #include <asm/prom.h> #include <asm/udbg.h> #include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> #include <asm/qe.h> #include <asm/qe_ic.h> diff --git a/arch/powerpc/platforms/83xx/mpc836x_rdk.c b/arch/powerpc/platforms/83xx/mpc836x_rdk.c index c10dec4bf178..a5273bb28e1b 100644 --- a/arch/powerpc/platforms/83xx/mpc836x_rdk.c +++ b/arch/powerpc/platforms/83xx/mpc836x_rdk.c @@ -23,6 +23,7 @@ #include <asm/qe.h> #include <asm/qe_ic.h> #include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> #include "mpc83xx.h" diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c index 64d17b0d6455..be62de23bead 100644 --- a/arch/powerpc/platforms/83xx/mpc837x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c @@ -19,6 +19,7 @@ #include <asm/ipic.h> #include <asm/udbg.h> #include <asm/prom.h> +#include <sysdev/fsl_pci.h> #include "mpc83xx.h" diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c index c00356bdb1dd..da030afa2e2c 100644 --- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c @@ -17,6 +17,7 @@ #include <asm/time.h> #include <asm/ipic.h> #include <asm/udbg.h> +#include <sysdev/fsl_pci.h> #include "mpc83xx.h" diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h index 88a3b5cabb18..2a7cbabb410a 100644 --- a/arch/powerpc/platforms/83xx/mpc83xx.h +++ b/arch/powerpc/platforms/83xx/mpc83xx.h @@ -26,6 +26,8 @@ #define MPC834X_SICRL_USB1 0x20000000 #define MPC831X_SICRL_USB_MASK 0x00000c00 #define MPC831X_SICRL_USB_ULPI 0x00000800 +#define MPC8315_SICRL_USB_MASK 0x000000fc +#define MPC8315_SICRL_USB_ULPI 0x00000054 #define MPC837X_SICRL_USB_MASK 0xf0000000 #define MPC837X_SICRL_USB_ULPI 0x50000000 @@ -34,6 +36,8 @@ #define MPC834X_SICRH_USB_UTMI 0x00020000 #define MPC831X_SICRH_USB_MASK 0x000000e0 #define MPC831X_SICRH_USB_ULPI 0x000000a0 +#define MPC8315_SICRH_USB_MASK 0x0000ff00 +#define MPC8315_SICRH_USB_ULPI 0x00000000 /* USB Control Register */ #define FSL_USB2_CONTROL_OFFS 0x500 @@ -55,7 +59,6 @@ * mpc83xx_* files. Mostly for use by mpc83xx_setup */ -extern int mpc83xx_add_bridge(struct device_node *dev); extern void mpc83xx_restart(char *cmd); extern long mpc83xx_time_init(void); extern int mpc834x_usb_cfg(void); diff --git a/arch/powerpc/platforms/83xx/pci.c b/arch/powerpc/platforms/83xx/pci.c deleted file mode 100644 index 14f1080c6c9d..000000000000 --- a/arch/powerpc/platforms/83xx/pci.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * FSL SoC setup code - * - * Maintained by Kumar Gala (see MAINTAINERS for contact information) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/stddef.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/irq.h> -#include <linux/module.h> - -#include <asm/system.h> -#include <asm/atomic.h> -#include <asm/io.h> -#include <asm/pci-bridge.h> -#include <asm/prom.h> -#include <sysdev/fsl_soc.h> - -#undef DEBUG - -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif - -int __init mpc83xx_add_bridge(struct device_node *dev) -{ - int len; - struct pci_controller *hose; - struct resource rsrc; - const int *bus_range; - int primary = 1, has_address = 0; - phys_addr_t immr = get_immrbase(); - - DBG("Adding PCI host bridge %s\n", dev->full_name); - - /* Fetch host bridge registers address */ - has_address = (of_address_to_resource(dev, 0, &rsrc) == 0); - - /* Get bus range if any */ - bus_range = of_get_property(dev, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) { - printk(KERN_WARNING "Can't get bus-range for %s, assume" - " bus 0\n", dev->full_name); - } - - ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS; - hose = pcibios_alloc_controller(dev); - if (!hose) - return -ENOMEM; - - hose->first_busno = bus_range ? bus_range[0] : 0; - hose->last_busno = bus_range ? bus_range[1] : 0xff; - - /* MPC83xx supports up to two host controllers one at 0x8500 from immrbar - * the other at 0x8600, we consider the 0x8500 the primary controller - */ - /* PCI 1 */ - if ((rsrc.start & 0xfffff) == 0x8500) { - setup_indirect_pci(hose, immr + 0x8300, immr + 0x8304, 0); - } - /* PCI 2 */ - if ((rsrc.start & 0xfffff) == 0x8600) { - setup_indirect_pci(hose, immr + 0x8380, immr + 0x8384, 0); - primary = 0; - } - - printk(KERN_INFO "Found MPC83xx PCI host bridge at 0x%016llx. " - "Firmware bus number: %d->%d\n", - (unsigned long long)rsrc.start, hose->first_busno, - hose->last_busno); - - DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", - hose, hose->cfg_addr, hose->cfg_data); - - /* Interpret the "ranges" property */ - /* This also maps the I/O region and sets isa_io/mem_base */ - pci_process_bridge_OF_ranges(hose, dev, primary); - - return 0; -} diff --git a/arch/powerpc/platforms/83xx/sbc834x.c b/arch/powerpc/platforms/83xx/sbc834x.c index cf382474a83d..fc21f5c15bab 100644 --- a/arch/powerpc/platforms/83xx/sbc834x.c +++ b/arch/powerpc/platforms/83xx/sbc834x.c @@ -37,6 +37,7 @@ #include <asm/prom.h> #include <asm/udbg.h> #include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> #include "mpc83xx.h" diff --git a/arch/powerpc/platforms/83xx/suspend-asm.S b/arch/powerpc/platforms/83xx/suspend-asm.S new file mode 100644 index 000000000000..1930543c98d3 --- /dev/null +++ b/arch/powerpc/platforms/83xx/suspend-asm.S @@ -0,0 +1,533 @@ +/* + * Enter and leave deep sleep state on MPC83xx + * + * Copyright (c) 2006-2008 Freescale Semiconductor, Inc. + * Author: Scott Wood <scottwood@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <asm/page.h> +#include <asm/ppc_asm.h> +#include <asm/reg.h> +#include <asm/asm-offsets.h> + +#define SS_MEMSAVE 0x00 /* First 8 bytes of RAM */ +#define SS_HID 0x08 /* 3 HIDs */ +#define SS_IABR 0x14 /* 2 IABRs */ +#define SS_IBCR 0x1c +#define SS_DABR 0x20 /* 2 DABRs */ +#define SS_DBCR 0x28 +#define SS_SP 0x2c +#define SS_SR 0x30 /* 16 segment registers */ +#define SS_R2 0x70 +#define SS_MSR 0x74 +#define SS_SDR1 0x78 +#define SS_LR 0x7c +#define SS_SPRG 0x80 /* 4 SPRGs */ +#define SS_DBAT 0x90 /* 8 DBATs */ +#define SS_IBAT 0xd0 /* 8 IBATs */ +#define SS_TB 0x110 +#define SS_CR 0x118 +#define SS_GPREG 0x11c /* r12-r31 */ +#define STATE_SAVE_SIZE 0x16c + + .section .data + .align 5 + +mpc83xx_sleep_save_area: + .space STATE_SAVE_SIZE +immrbase: + .long 0 + + .section .text + .align 5 + + /* r3 = physical address of IMMR */ +_GLOBAL(mpc83xx_enter_deep_sleep) + lis r4, immrbase@ha + stw r3, immrbase@l(r4) + + /* The first 2 words of memory are used to communicate with the + * bootloader, to tell it how to resume. + * + * The first word is the magic number 0xf5153ae5, and the second + * is the pointer to mpc83xx_deep_resume. + * + * The original content of these two words is saved in SS_MEMSAVE. + */ + + lis r3, mpc83xx_sleep_save_area@h + ori r3, r3, mpc83xx_sleep_save_area@l + + lis r4, KERNELBASE@h + lwz r5, 0(r4) + lwz r6, 4(r4) + + stw r5, SS_MEMSAVE+0(r3) + stw r6, SS_MEMSAVE+4(r3) + + mfspr r5, SPRN_HID0 + mfspr r6, SPRN_HID1 + mfspr r7, SPRN_HID2 + + stw r5, SS_HID+0(r3) + stw r6, SS_HID+4(r3) + stw r7, SS_HID+8(r3) + + mfspr r4, SPRN_IABR + mfspr r5, SPRN_IABR2 + mfspr r6, SPRN_IBCR + mfspr r7, SPRN_DABR + mfspr r8, SPRN_DABR2 + mfspr r9, SPRN_DBCR + + stw r4, SS_IABR+0(r3) + stw r5, SS_IABR+4(r3) + stw r6, SS_IBCR(r3) + stw r7, SS_DABR+0(r3) + stw r8, SS_DABR+4(r3) + stw r9, SS_DBCR(r3) + + mfspr r4, SPRN_SPRG0 + mfspr r5, SPRN_SPRG1 + mfspr r6, SPRN_SPRG2 + mfspr r7, SPRN_SPRG3 + mfsdr1 r8 + + stw r4, SS_SPRG+0(r3) + stw r5, SS_SPRG+4(r3) + stw r6, SS_SPRG+8(r3) + stw r7, SS_SPRG+12(r3) + stw r8, SS_SDR1(r3) + + mfspr r4, SPRN_DBAT0U + mfspr r5, SPRN_DBAT0L + mfspr r6, SPRN_DBAT1U + mfspr r7, SPRN_DBAT1L + + stw r4, SS_DBAT+0x00(r3) + stw r5, SS_DBAT+0x04(r3) + stw r6, SS_DBAT+0x08(r3) + stw r7, SS_DBAT+0x0c(r3) + + mfspr r4, SPRN_DBAT2U + mfspr r5, SPRN_DBAT2L + mfspr r6, SPRN_DBAT3U + mfspr r7, SPRN_DBAT3L + + stw r4, SS_DBAT+0x10(r3) + stw r5, SS_DBAT+0x14(r3) + stw r6, SS_DBAT+0x18(r3) + stw r7, SS_DBAT+0x1c(r3) + + mfspr r4, SPRN_DBAT4U + mfspr r5, SPRN_DBAT4L + mfspr r6, SPRN_DBAT5U + mfspr r7, SPRN_DBAT5L + + stw r4, SS_DBAT+0x20(r3) + stw r5, SS_DBAT+0x24(r3) + stw r6, SS_DBAT+0x28(r3) + stw r7, SS_DBAT+0x2c(r3) + + mfspr r4, SPRN_DBAT6U + mfspr r5, SPRN_DBAT6L + mfspr r6, SPRN_DBAT7U + mfspr r7, SPRN_DBAT7L + + stw r4, SS_DBAT+0x30(r3) + stw r5, SS_DBAT+0x34(r3) + stw r6, SS_DBAT+0x38(r3) + stw r7, SS_DBAT+0x3c(r3) + + mfspr r4, SPRN_IBAT0U + mfspr r5, SPRN_IBAT0L + mfspr r6, SPRN_IBAT1U + mfspr r7, SPRN_IBAT1L + + stw r4, SS_IBAT+0x00(r3) + stw r5, SS_IBAT+0x04(r3) + stw r6, SS_IBAT+0x08(r3) + stw r7, SS_IBAT+0x0c(r3) + + mfspr r4, SPRN_IBAT2U + mfspr r5, SPRN_IBAT2L + mfspr r6, SPRN_IBAT3U + mfspr r7, SPRN_IBAT3L + + stw r4, SS_IBAT+0x10(r3) + stw r5, SS_IBAT+0x14(r3) + stw r6, SS_IBAT+0x18(r3) + stw r7, SS_IBAT+0x1c(r3) + + mfspr r4, SPRN_IBAT4U + mfspr r5, SPRN_IBAT4L + mfspr r6, SPRN_IBAT5U + mfspr r7, SPRN_IBAT5L + + stw r4, SS_IBAT+0x20(r3) + stw r5, SS_IBAT+0x24(r3) + stw r6, SS_IBAT+0x28(r3) + stw r7, SS_IBAT+0x2c(r3) + + mfspr r4, SPRN_IBAT6U + mfspr r5, SPRN_IBAT6L + mfspr r6, SPRN_IBAT7U + mfspr r7, SPRN_IBAT7L + + stw r4, SS_IBAT+0x30(r3) + stw r5, SS_IBAT+0x34(r3) + stw r6, SS_IBAT+0x38(r3) + stw r7, SS_IBAT+0x3c(r3) + + mfmsr r4 + mflr r5 + mfcr r6 + + stw r4, SS_MSR(r3) + stw r5, SS_LR(r3) + stw r6, SS_CR(r3) + stw r1, SS_SP(r3) + stw r2, SS_R2(r3) + +1: mftbu r4 + mftb r5 + mftbu r6 + cmpw r4, r6 + bne 1b + + stw r4, SS_TB+0(r3) + stw r5, SS_TB+4(r3) + + stmw r12, SS_GPREG(r3) + + li r4, 0 + addi r6, r3, SS_SR-4 +1: mfsrin r5, r4 + stwu r5, 4(r6) + addis r4, r4, 0x1000 + cmpwi r4, 0 + bne 1b + + /* Disable machine checks and critical exceptions */ + mfmsr r4 + rlwinm r4, r4, 0, ~MSR_CE + rlwinm r4, r4, 0, ~MSR_ME + mtmsr r4 + isync + +#define TMP_VIRT_IMMR 0xf0000000 +#define DEFAULT_IMMR_VALUE 0xff400000 +#define IMMRBAR_BASE 0x0000 + + lis r4, immrbase@ha + lwz r4, immrbase@l(r4) + + /* Use DBAT0 to address the current IMMR space */ + + ori r4, r4, 0x002a + mtspr SPRN_DBAT0L, r4 + lis r8, TMP_VIRT_IMMR@h + ori r4, r8, 0x001e /* 1 MByte accessable from Kernel Space only */ + mtspr SPRN_DBAT0U, r4 + isync + + /* Use DBAT1 to address the original IMMR space */ + + lis r4, DEFAULT_IMMR_VALUE@h + ori r4, r4, 0x002a + mtspr SPRN_DBAT1L, r4 + lis r9, (TMP_VIRT_IMMR + 0x01000000)@h + ori r4, r9, 0x001e /* 1 MByte accessable from Kernel Space only */ + mtspr SPRN_DBAT1U, r4 + isync + + /* Use DBAT2 to address the beginning of RAM. This isn't done + * using the normal virtual mapping, because with page debugging + * enabled it will be read-only. + */ + + li r4, 0x0002 + mtspr SPRN_DBAT2L, r4 + lis r4, KERNELBASE@h + ori r4, r4, 0x001e /* 1 MByte accessable from Kernel Space only */ + mtspr SPRN_DBAT2U, r4 + isync + + /* Flush the cache with our BAT, as there will be TLB misses + * otherwise if page debugging is enabled, and these misses + * will disturb the PLRU algorithm. + */ + + bl __flush_disable_L1 + + /* Keep the i-cache enabled, so the hack below for low-boot + * flash will work. + */ + mfspr r3, SPRN_HID0 + ori r3, r3, HID0_ICE + mtspr SPRN_HID0, r3 + isync + + lis r6, 0xf515 + ori r6, r6, 0x3ae5 + + lis r7, mpc83xx_deep_resume@h + ori r7, r7, mpc83xx_deep_resume@l + tophys(r7, r7) + + lis r5, KERNELBASE@h + stw r6, 0(r5) + stw r7, 4(r5) + + /* Reset BARs */ + + li r4, 0 + stw r4, 0x0024(r8) + stw r4, 0x002c(r8) + stw r4, 0x0034(r8) + stw r4, 0x003c(r8) + stw r4, 0x0064(r8) + stw r4, 0x006c(r8) + + /* Rev 1 of the 8313 has problems with wakeup events that are + * pending during the transition to deep sleep state (such as if + * the PCI host sets the state to D3 and then D0 in rapid + * succession). This check shrinks the race window somewhat. + * + * See erratum PCI23, though the problem is not limited + * to PCI. + */ + + lwz r3, 0x0b04(r8) + andi. r3, r3, 1 + bne- mpc83xx_deep_resume + + /* Move IMMR back to the default location, following the + * procedure specified in the MPC8313 manual. + */ + lwz r4, IMMRBAR_BASE(r8) + isync + lis r4, DEFAULT_IMMR_VALUE@h + stw r4, IMMRBAR_BASE(r8) + lis r4, KERNELBASE@h + lwz r4, 0(r4) + isync + lwz r4, IMMRBAR_BASE(r9) + mr r8, r9 + isync + + /* Check the Reset Configuration Word to see whether flash needs + * to be mapped at a low address or a high address. + */ + + lwz r4, 0x0904(r8) + andis. r4, r4, 0x0400 + li r4, 0 + beq boot_low + lis r4, 0xff80 +boot_low: + stw r4, 0x0020(r8) + lis r7, 0x8000 + ori r7, r7, 0x0016 + + mfspr r5, SPRN_HID0 + rlwinm r5, r5, 0, ~(HID0_DOZE | HID0_NAP) + oris r5, r5, HID0_SLEEP@h + mtspr SPRN_HID0, r5 + isync + + mfmsr r5 + oris r5, r5, MSR_POW@h + + /* Enable the flash mapping at the appropriate address. This + * mapping will override the RAM mapping if booting low, so there's + * no need to disable the latter. This must be done inside the same + * cache line as setting MSR_POW, so that no instruction fetches + * from RAM happen after the flash mapping is turned on. + */ + + .align 5 + stw r7, 0x0024(r8) + sync + isync + mtmsr r5 + isync +1: b 1b + +mpc83xx_deep_resume: + lis r4, 1f@h + ori r4, r4, 1f@l + tophys(r4, r4) + mtsrr0 r4 + + mfmsr r4 + rlwinm r4, r4, 0, ~(MSR_IR | MSR_DR) + mtsrr1 r4 + + rfi + +1: tlbia + bl __inval_enable_L1 + + lis r3, mpc83xx_sleep_save_area@h + ori r3, r3, mpc83xx_sleep_save_area@l + tophys(r3, r3) + + lwz r5, SS_MEMSAVE+0(r3) + lwz r6, SS_MEMSAVE+4(r3) + + stw r5, 0(0) + stw r6, 4(0) + + lwz r5, SS_HID+0(r3) + lwz r6, SS_HID+4(r3) + lwz r7, SS_HID+8(r3) + + mtspr SPRN_HID0, r5 + mtspr SPRN_HID1, r6 + mtspr SPRN_HID2, r7 + + lwz r4, SS_IABR+0(r3) + lwz r5, SS_IABR+4(r3) + lwz r6, SS_IBCR(r3) + lwz r7, SS_DABR+0(r3) + lwz r8, SS_DABR+4(r3) + lwz r9, SS_DBCR(r3) + + mtspr SPRN_IABR, r4 + mtspr SPRN_IABR2, r5 + mtspr SPRN_IBCR, r6 + mtspr SPRN_DABR, r7 + mtspr SPRN_DABR2, r8 + mtspr SPRN_DBCR, r9 + + li r4, 0 + addi r6, r3, SS_SR-4 +1: lwzu r5, 4(r6) + mtsrin r5, r4 + addis r4, r4, 0x1000 + cmpwi r4, 0 + bne 1b + + lwz r4, SS_DBAT+0x00(r3) + lwz r5, SS_DBAT+0x04(r3) + lwz r6, SS_DBAT+0x08(r3) + lwz r7, SS_DBAT+0x0c(r3) + + mtspr SPRN_DBAT0U, r4 + mtspr SPRN_DBAT0L, r5 + mtspr SPRN_DBAT1U, r6 + mtspr SPRN_DBAT1L, r7 + + lwz r4, SS_DBAT+0x10(r3) + lwz r5, SS_DBAT+0x14(r3) + lwz r6, SS_DBAT+0x18(r3) + lwz r7, SS_DBAT+0x1c(r3) + + mtspr SPRN_DBAT2U, r4 + mtspr SPRN_DBAT2L, r5 + mtspr SPRN_DBAT3U, r6 + mtspr SPRN_DBAT3L, r7 + + lwz r4, SS_DBAT+0x20(r3) + lwz r5, SS_DBAT+0x24(r3) + lwz r6, SS_DBAT+0x28(r3) + lwz r7, SS_DBAT+0x2c(r3) + + mtspr SPRN_DBAT4U, r4 + mtspr SPRN_DBAT4L, r5 + mtspr SPRN_DBAT5U, r6 + mtspr SPRN_DBAT5L, r7 + + lwz r4, SS_DBAT+0x30(r3) + lwz r5, SS_DBAT+0x34(r3) + lwz r6, SS_DBAT+0x38(r3) + lwz r7, SS_DBAT+0x3c(r3) + + mtspr SPRN_DBAT6U, r4 + mtspr SPRN_DBAT6L, r5 + mtspr SPRN_DBAT7U, r6 + mtspr SPRN_DBAT7L, r7 + + lwz r4, SS_IBAT+0x00(r3) + lwz r5, SS_IBAT+0x04(r3) + lwz r6, SS_IBAT+0x08(r3) + lwz r7, SS_IBAT+0x0c(r3) + + mtspr SPRN_IBAT0U, r4 + mtspr SPRN_IBAT0L, r5 + mtspr SPRN_IBAT1U, r6 + mtspr SPRN_IBAT1L, r7 + + lwz r4, SS_IBAT+0x10(r3) + lwz r5, SS_IBAT+0x14(r3) + lwz r6, SS_IBAT+0x18(r3) + lwz r7, SS_IBAT+0x1c(r3) + + mtspr SPRN_IBAT2U, r4 + mtspr SPRN_IBAT2L, r5 + mtspr SPRN_IBAT3U, r6 + mtspr SPRN_IBAT3L, r7 + + lwz r4, SS_IBAT+0x20(r3) + lwz r5, SS_IBAT+0x24(r3) + lwz r6, SS_IBAT+0x28(r3) + lwz r7, SS_IBAT+0x2c(r3) + + mtspr SPRN_IBAT4U, r4 + mtspr SPRN_IBAT4L, r5 + mtspr SPRN_IBAT5U, r6 + mtspr SPRN_IBAT5L, r7 + + lwz r4, SS_IBAT+0x30(r3) + lwz r5, SS_IBAT+0x34(r3) + lwz r6, SS_IBAT+0x38(r3) + lwz r7, SS_IBAT+0x3c(r3) + + mtspr SPRN_IBAT6U, r4 + mtspr SPRN_IBAT6L, r5 + mtspr SPRN_IBAT7U, r6 + mtspr SPRN_IBAT7L, r7 + + lwz r4, SS_SPRG+0(r3) + lwz r5, SS_SPRG+4(r3) + lwz r6, SS_SPRG+8(r3) + lwz r7, SS_SPRG+12(r3) + lwz r8, SS_SDR1(r3) + + mtspr SPRN_SPRG0, r4 + mtspr SPRN_SPRG1, r5 + mtspr SPRN_SPRG2, r6 + mtspr SPRN_SPRG3, r7 + mtsdr1 r8 + + lwz r4, SS_MSR(r3) + lwz r5, SS_LR(r3) + lwz r6, SS_CR(r3) + lwz r1, SS_SP(r3) + lwz r2, SS_R2(r3) + + mtsrr1 r4 + mtsrr0 r5 + mtcr r6 + + li r4, 0 + mtspr SPRN_TBWL, r4 + + lwz r4, SS_TB+0(r3) + lwz r5, SS_TB+4(r3) + + mtspr SPRN_TBWU, r4 + mtspr SPRN_TBWL, r5 + + lmw r12, SS_GPREG(r3) + + /* Kick decrementer */ + li r0, 1 + mtdec r0 + + rfi diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c new file mode 100644 index 000000000000..08e65fc8b98c --- /dev/null +++ b/arch/powerpc/platforms/83xx/suspend.c @@ -0,0 +1,388 @@ +/* + * MPC83xx suspend support + * + * Author: Scott Wood <scottwood@freescale.com> + * + * Copyright (c) 2006-2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/pm.h> +#include <linux/types.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/wait.h> +#include <linux/kthread.h> +#include <linux/freezer.h> +#include <linux/suspend.h> +#include <linux/fsl_devices.h> +#include <linux/of_platform.h> + +#include <asm/reg.h> +#include <asm/io.h> +#include <asm/time.h> +#include <asm/mpc6xx.h> + +#include <sysdev/fsl_soc.h> + +#define PMCCR1_NEXT_STATE 0x0C /* Next state for power management */ +#define PMCCR1_NEXT_STATE_SHIFT 2 +#define PMCCR1_CURR_STATE 0x03 /* Current state for power management*/ +#define IMMR_RCW_OFFSET 0x900 +#define RCW_PCI_HOST 0x80000000 + +void mpc83xx_enter_deep_sleep(phys_addr_t immrbase); + +struct mpc83xx_pmc { + u32 config; +#define PMCCR_DLPEN 2 /* DDR SDRAM low power enable */ +#define PMCCR_SLPEN 1 /* System low power enable */ + + u32 event; + u32 mask; +/* All but PMCI are deep-sleep only */ +#define PMCER_GPIO 0x100 +#define PMCER_PCI 0x080 +#define PMCER_USB 0x040 +#define PMCER_ETSEC1 0x020 +#define PMCER_ETSEC2 0x010 +#define PMCER_TIMER 0x008 +#define PMCER_INT1 0x004 +#define PMCER_INT2 0x002 +#define PMCER_PMCI 0x001 +#define PMCER_ALL 0x1FF + + /* deep-sleep only */ + u32 config1; +#define PMCCR1_USE_STATE 0x80000000 +#define PMCCR1_PME_EN 0x00000080 +#define PMCCR1_ASSERT_PME 0x00000040 +#define PMCCR1_POWER_OFF 0x00000020 + + /* deep-sleep only */ + u32 config2; +}; + +struct mpc83xx_rcw { + u32 rcwlr; + u32 rcwhr; +}; + +struct mpc83xx_clock { + u32 spmr; + u32 occr; + u32 sccr; +}; + +struct pmc_type { + int has_deep_sleep; +}; + +static struct of_device *pmc_dev; +static int has_deep_sleep, deep_sleeping; +static int pmc_irq; +static struct mpc83xx_pmc __iomem *pmc_regs; +static struct mpc83xx_clock __iomem *clock_regs; +static int is_pci_agent, wake_from_pci; +static phys_addr_t immrbase; +static int pci_pm_state; +static DECLARE_WAIT_QUEUE_HEAD(agent_wq); + +int fsl_deep_sleep(void) +{ + return deep_sleeping; +} + +static int mpc83xx_change_state(void) +{ + u32 curr_state; + u32 reg_cfg1 = in_be32(&pmc_regs->config1); + + if (is_pci_agent) { + pci_pm_state = (reg_cfg1 & PMCCR1_NEXT_STATE) >> + PMCCR1_NEXT_STATE_SHIFT; + curr_state = reg_cfg1 & PMCCR1_CURR_STATE; + + if (curr_state != pci_pm_state) { + reg_cfg1 &= ~PMCCR1_CURR_STATE; + reg_cfg1 |= pci_pm_state; + out_be32(&pmc_regs->config1, reg_cfg1); + + wake_up(&agent_wq); + return 1; + } + } + + return 0; +} + +static irqreturn_t pmc_irq_handler(int irq, void *dev_id) +{ + u32 event = in_be32(&pmc_regs->event); + int ret = IRQ_NONE; + + if (mpc83xx_change_state()) + ret = IRQ_HANDLED; + + if (event) { + out_be32(&pmc_regs->event, event); + ret = IRQ_HANDLED; + } + + return ret; +} + +static int mpc83xx_suspend_enter(suspend_state_t state) +{ + int ret = -EAGAIN; + + /* Don't go to sleep if there's a race where pci_pm_state changes + * between the agent thread checking it and the PM code disabling + * interrupts. + */ + if (wake_from_pci) { + if (pci_pm_state != (deep_sleeping ? 3 : 2)) + goto out; + + out_be32(&pmc_regs->config1, + in_be32(&pmc_regs->config1) | PMCCR1_PME_EN); + } + + /* Put the system into low-power mode and the RAM + * into self-refresh mode once the core goes to + * sleep. + */ + + out_be32(&pmc_regs->config, PMCCR_SLPEN | PMCCR_DLPEN); + + /* If it has deep sleep (i.e. it's an 831x or compatible), + * disable power to the core upon entering sleep mode. This will + * require going through the boot firmware upon a wakeup event. + */ + + if (deep_sleeping) { + out_be32(&pmc_regs->mask, PMCER_ALL); + + out_be32(&pmc_regs->config1, + in_be32(&pmc_regs->config1) | PMCCR1_POWER_OFF); + + enable_kernel_fp(); + + mpc83xx_enter_deep_sleep(immrbase); + + out_be32(&pmc_regs->config1, + in_be32(&pmc_regs->config1) & ~PMCCR1_POWER_OFF); + + out_be32(&pmc_regs->mask, PMCER_PMCI); + } else { + out_be32(&pmc_regs->mask, PMCER_PMCI); + + mpc6xx_enter_standby(); + } + + ret = 0; + +out: + out_be32(&pmc_regs->config1, + in_be32(&pmc_regs->config1) & ~PMCCR1_PME_EN); + + return ret; +} + +static void mpc83xx_suspend_finish(void) +{ + deep_sleeping = 0; +} + +static int mpc83xx_suspend_valid(suspend_state_t state) +{ + return state == PM_SUSPEND_STANDBY || state == PM_SUSPEND_MEM; +} + +static int mpc83xx_suspend_begin(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_STANDBY: + deep_sleeping = 0; + return 0; + + case PM_SUSPEND_MEM: + if (has_deep_sleep) + deep_sleeping = 1; + + return 0; + + default: + return -EINVAL; + } +} + +static int agent_thread_fn(void *data) +{ + while (1) { + wait_event_interruptible(agent_wq, pci_pm_state >= 2); + try_to_freeze(); + + if (signal_pending(current) || pci_pm_state < 2) + continue; + + /* With a preemptible kernel (or SMP), this could race with + * a userspace-driven suspend request. It's probably best + * to avoid mixing the two with such a configuration (or + * else fix it by adding a mutex to state_store that we can + * synchronize with). + */ + + wake_from_pci = 1; + + pm_suspend(pci_pm_state == 3 ? PM_SUSPEND_MEM : + PM_SUSPEND_STANDBY); + + wake_from_pci = 0; + } + + return 0; +} + +static void mpc83xx_set_agent(void) +{ + out_be32(&pmc_regs->config1, PMCCR1_USE_STATE); + out_be32(&pmc_regs->mask, PMCER_PMCI); + + kthread_run(agent_thread_fn, NULL, "PCI power mgt"); +} + +static int mpc83xx_is_pci_agent(void) +{ + struct mpc83xx_rcw __iomem *rcw_regs; + int ret; + + rcw_regs = ioremap(get_immrbase() + IMMR_RCW_OFFSET, + sizeof(struct mpc83xx_rcw)); + + if (!rcw_regs) + return -ENOMEM; + + ret = !(in_be32(&rcw_regs->rcwhr) & RCW_PCI_HOST); + + iounmap(rcw_regs); + return ret; +} + +static struct platform_suspend_ops mpc83xx_suspend_ops = { + .valid = mpc83xx_suspend_valid, + .begin = mpc83xx_suspend_begin, + .enter = mpc83xx_suspend_enter, + .finish = mpc83xx_suspend_finish, +}; + +static int pmc_probe(struct of_device *ofdev, + const struct of_device_id *match) +{ + struct device_node *np = ofdev->node; + struct resource res; + struct pmc_type *type = match->data; + int ret = 0; + + if (!of_device_is_available(np)) + return -ENODEV; + + has_deep_sleep = type->has_deep_sleep; + immrbase = get_immrbase(); + pmc_dev = ofdev; + + is_pci_agent = mpc83xx_is_pci_agent(); + if (is_pci_agent < 0) + return is_pci_agent; + + ret = of_address_to_resource(np, 0, &res); + if (ret) + return -ENODEV; + + pmc_irq = irq_of_parse_and_map(np, 0); + if (pmc_irq != NO_IRQ) { + ret = request_irq(pmc_irq, pmc_irq_handler, IRQF_SHARED, + "pmc", ofdev); + + if (ret) + return -EBUSY; + } + + pmc_regs = ioremap(res.start, sizeof(struct mpc83xx_pmc)); + + if (!pmc_regs) { + ret = -ENOMEM; + goto out; + } + + ret = of_address_to_resource(np, 1, &res); + if (ret) { + ret = -ENODEV; + goto out_pmc; + } + + clock_regs = ioremap(res.start, sizeof(struct mpc83xx_pmc)); + + if (!clock_regs) { + ret = -ENOMEM; + goto out_pmc; + } + + if (is_pci_agent) + mpc83xx_set_agent(); + + suspend_set_ops(&mpc83xx_suspend_ops); + return 0; + +out_pmc: + iounmap(pmc_regs); +out: + if (pmc_irq != NO_IRQ) + free_irq(pmc_irq, ofdev); + + return ret; +} + +static int pmc_remove(struct of_device *ofdev) +{ + return -EPERM; +}; + +static struct pmc_type pmc_types[] = { + { + .has_deep_sleep = 1, + }, + { + .has_deep_sleep = 0, + } +}; + +static struct of_device_id pmc_match[] = { + { + .compatible = "fsl,mpc8313-pmc", + .data = &pmc_types[0], + }, + { + .compatible = "fsl,mpc8349-pmc", + .data = &pmc_types[1], + }, + {} +}; + +static struct of_platform_driver pmc_driver = { + .name = "mpc83xx-pmc", + .match_table = pmc_match, + .probe = pmc_probe, + .remove = pmc_remove +}; + +static int pmc_init(void) +{ + return of_register_platform_driver(&pmc_driver); +} + +module_init(pmc_init); diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c index 64bcf0a33c71..cc99c280aad9 100644 --- a/arch/powerpc/platforms/83xx/usb.c +++ b/arch/powerpc/platforms/83xx/usb.c @@ -137,15 +137,21 @@ int mpc831x_usb_cfg(void) /* Configure pin mux for ULPI. There is no pin mux for UTMI */ if (prop && !strcmp(prop, "ulpi")) { - temp = in_be32(immap + MPC83XX_SICRL_OFFS); - temp &= ~MPC831X_SICRL_USB_MASK; - temp |= MPC831X_SICRL_USB_ULPI; - out_be32(immap + MPC83XX_SICRL_OFFS, temp); - - temp = in_be32(immap + MPC83XX_SICRH_OFFS); - temp &= ~MPC831X_SICRH_USB_MASK; - temp |= MPC831X_SICRH_USB_ULPI; - out_be32(immap + MPC83XX_SICRH_OFFS, temp); + if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) { + clrsetbits_be32(immap + MPC83XX_SICRL_OFFS, + MPC8315_SICRL_USB_MASK, + MPC8315_SICRL_USB_ULPI); + clrsetbits_be32(immap + MPC83XX_SICRH_OFFS, + MPC8315_SICRH_USB_MASK, + MPC8315_SICRH_USB_ULPI); + } else { + clrsetbits_be32(immap + MPC83XX_SICRL_OFFS, + MPC831X_SICRL_USB_MASK, + MPC831X_SICRL_USB_ULPI); + clrsetbits_be32(immap + MPC83XX_SICRH_OFFS, + MPC831X_SICRH_USB_MASK, + MPC831X_SICRH_USB_ULPI); + } } iounmap(immap); diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index cebea5cadbc1..291675b0097a 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -2,8 +2,8 @@ menuconfig MPC85xx bool "Machine Type" depends on PPC_85xx select PPC_UDBG_16550 - select PPC_INDIRECT_PCI if PCI select MPIC + select PPC_PCI_CHOICE select FSL_PCI if PCI select SERIAL_8250_SHARE_IRQ if SERIAL_8250 default y @@ -86,7 +86,6 @@ config TQM8548 help This option enables support for the TQ Components TQM8548 board. select DEFAULT_UIMAGE - select PPC_CPM_NEW_BINDING select TQM85xx config TQM8555 diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c index 25f41cd2d33a..00c535806647 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c @@ -115,7 +115,6 @@ void __init mpc85xx_ds_pic_init(void) #ifdef CONFIG_PCI static int primary_phb_addr; -extern int uses_fsl_uli_m1575; extern int uli_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn); @@ -161,7 +160,6 @@ static void __init mpc85xx_ds_setup_arch(void) } } - uses_fsl_uli_m1575 = 1; ppc_md.pci_exclude_device = mpc85xx_exclude_device; #endif diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig index 80a81e02bb55..9355a5269431 100644 --- a/arch/powerpc/platforms/86xx/Kconfig +++ b/arch/powerpc/platforms/86xx/Kconfig @@ -27,6 +27,7 @@ config SBC8641D config MPC8610_HPCD bool "Freescale MPC8610 HPCD" select DEFAULT_UIMAGE + select FSL_ULI1575 help This option enables support for the MPC8610 HPCD board. @@ -34,6 +35,7 @@ endif config MPC8641 bool + select PPC_PCI_CHOICE select FSL_PCI if PCI select PPC_UDBG_16550 select MPIC @@ -41,6 +43,7 @@ config MPC8641 config MPC8610 bool + select PPC_PCI_CHOICE select FSL_PCI if PCI select PPC_UDBG_16550 select MPIC diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c index 30725302884a..5eedb710896e 100644 --- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c +++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c @@ -58,93 +58,6 @@ static int __init mpc8610_declare_of_platform_devices(void) } machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices); -#ifdef CONFIG_PCI -static void __devinit quirk_uli1575(struct pci_dev *dev) -{ - u32 temp32; - - /* Disable INTx */ - pci_read_config_dword(dev, 0x48, &temp32); - pci_write_config_dword(dev, 0x48, (temp32 | 1<<26)); - - /* Enable sideband interrupt */ - pci_read_config_dword(dev, 0x90, &temp32); - pci_write_config_dword(dev, 0x90, (temp32 | 1<<22)); -} - -static void __devinit quirk_uli5288(struct pci_dev *dev) -{ - unsigned char c; - unsigned short temp; - - /* Interrupt Disable, Needed when SATA disabled */ - pci_read_config_word(dev, PCI_COMMAND, &temp); - temp |= 1<<10; - pci_write_config_word(dev, PCI_COMMAND, temp); - - pci_read_config_byte(dev, 0x83, &c); - c |= 0x80; - pci_write_config_byte(dev, 0x83, c); - - pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01); - pci_write_config_byte(dev, PCI_CLASS_DEVICE, 0x06); - - pci_read_config_byte(dev, 0x83, &c); - c &= 0x7f; - pci_write_config_byte(dev, 0x83, c); -} - -/* - * Since 8259PIC was disabled on the board, the IDE device can not - * use the legacy IRQ, we need to let the IDE device work under - * native mode and use the interrupt line like other PCI devices. - * IRQ14 is a sideband interrupt from IDE device to CPU and we use this - * as the interrupt for IDE device. - */ -static void __devinit quirk_uli5229(struct pci_dev *dev) -{ - unsigned char c; - - pci_read_config_byte(dev, 0x4b, &c); - c |= 0x10; - pci_write_config_byte(dev, 0x4b, c); -} - -/* - * SATA interrupt pin bug fix - * There's a chip bug for 5288, The interrupt pin should be 2, - * not the read only value 1, So it use INTB#, not INTA# which - * actually used by the IDE device 5229. - * As of this bug, during the PCI initialization, 5288 read the - * irq of IDE device from the device tree, this function fix this - * bug by re-assigning a correct irq to 5288. - * - */ -static void __devinit final_uli5288(struct pci_dev *dev) -{ - struct pci_controller *hose = pci_bus_to_host(dev->bus); - struct device_node *hosenode = hose ? hose->dn : NULL; - struct of_irq oirq; - int virq, pin = 2; - u32 laddr[3]; - - if (!hosenode) - return; - - laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8); - laddr[1] = laddr[2] = 0; - of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq); - virq = irq_create_of_mapping(oirq.controller, oirq.specifier, - oirq.size); - dev->irq = virq; -} - -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, final_uli5288); -#endif /* CONFIG_PCI */ - #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) static u32 get_busfreq(void) diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index 7916599c9126..f712d9c0991b 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -45,7 +45,6 @@ #endif #ifdef CONFIG_PCI -extern int uses_fsl_uli_m1575; extern int uli_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn); @@ -87,7 +86,6 @@ mpc86xx_hpcn_setup_arch(void) fsl_add_bridge(np, 0); } - uses_fsl_uli_m1575 = 1; ppc_md.pci_exclude_device = mpc86xx_exclude_device; #endif diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 690c1f46e698..1d0968775c0a 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -253,17 +253,13 @@ config CPM2 depends on MPC85xx || 8260 select CPM select PPC_LIB_RHEAP + select PPC_PCI_CHOICE help The CPM2 (Communications Processor Module) is a coprocessor on embedded CPUs made by Freescale. Selecting this option means that you wish to build a kernel for a machine with a CPM2 coprocessor on it (826x, 827x, 8560). -config PPC_CPM_NEW_BINDING - bool - depends on CPM1 || CPM2 - default y - config AXON_RAM tristate "Axon DDR2 memory device driver" depends on PPC_IBM_CELL_BLADE diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index 5bc4b611ff88..7f6512733862 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -42,12 +42,14 @@ config 40x select PPC_DCR_NATIVE select PPC_UDBG_16550 select 4xx_SOC + select PPC_PCI_CHOICE config 44x bool "AMCC 44x" select PPC_DCR_NATIVE select PPC_UDBG_16550 select 4xx_SOC + select PPC_PCI_CHOICE config E200 bool "Freescale e200" @@ -84,9 +86,6 @@ config TUNE_CELL machines. When building a kernel that is supposed to run only on Cell, you should also select the POWER4_ONLY option. -config 6xx - bool - # this is temp to handle compat with arch=ppc config 8xx bool diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig index 3959fcfe731c..c14d7d8d96c8 100644 --- a/arch/powerpc/platforms/cell/Kconfig +++ b/arch/powerpc/platforms/cell/Kconfig @@ -83,6 +83,22 @@ config CBE_RAS depends on PPC_CELL_NATIVE default y +config PPC_IBM_CELL_RESETBUTTON + bool "IBM Cell Blade Pinhole reset button" + depends on CBE_RAS && PPC_IBM_CELL_BLADE + default y + help + Support Pinhole Resetbutton on IBM Cell blades. + This adds a method to trigger system reset via front panel pinhole button. + +config PPC_IBM_CELL_POWERBUTTON + tristate "IBM Cell Blade power button" + depends on PPC_IBM_CELL_BLADE && PPC_PMI && INPUT_EVDEV + default y + help + Support Powerbutton on IBM Cell blades. + This will enable the powerbutton as an input device. + config CBE_THERM tristate "CBE thermal support" default m @@ -107,6 +123,15 @@ config CBE_CPUFREQ_PMI processor will not only be able to run at lower speed, but also at lower core voltage. +config CBE_CPUFREQ_SPU_GOVERNOR + tristate "CBE frequency scaling based on SPU usage" + depends on SPU_FS && CPU_FREQ + default m + help + This governor checks for spu usage to adjust the cpu frequency. + If no spu is running on a given cpu, that cpu will be throttled to + the minimal possible frequency. + endmenu config OPROFILE_CELL diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile index c2a7e4e5ddf9..7fd830872c43 100644 --- a/arch/powerpc/platforms/cell/Makefile +++ b/arch/powerpc/platforms/cell/Makefile @@ -8,6 +8,9 @@ obj-$(CONFIG_CBE_THERM) += cbe_thermal.o obj-$(CONFIG_CBE_CPUFREQ_PMI) += cbe_cpufreq_pmi.o obj-$(CONFIG_CBE_CPUFREQ) += cbe-cpufreq.o cbe-cpufreq-y += cbe_cpufreq_pervasive.o cbe_cpufreq.o +obj-$(CONFIG_CBE_CPUFREQ_SPU_GOVERNOR) += cpufreq_spudemand.o + +obj-$(CONFIG_PPC_IBM_CELL_POWERBUTTON) += cbe_powerbutton.o ifeq ($(CONFIG_SMP),y) obj-$(CONFIG_PPC_CELL_NATIVE) += smp.o diff --git a/arch/powerpc/platforms/cell/cbe_powerbutton.c b/arch/powerpc/platforms/cell/cbe_powerbutton.c new file mode 100644 index 000000000000..dcddaa5fcb66 --- /dev/null +++ b/arch/powerpc/platforms/cell/cbe_powerbutton.c @@ -0,0 +1,117 @@ +/* + * driver for powerbutton on IBM cell blades + * + * (C) Copyright IBM Corp. 2005-2008 + * + * Author: Christian Krafft <krafft@de.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/input.h> +#include <linux/platform_device.h> +#include <asm/pmi.h> +#include <asm/prom.h> + +static struct input_dev *button_dev; +static struct platform_device *button_pdev; + +static void cbe_powerbutton_handle_pmi(pmi_message_t pmi_msg) +{ + BUG_ON(pmi_msg.type != PMI_TYPE_POWER_BUTTON); + + input_report_key(button_dev, KEY_POWER, 1); + input_sync(button_dev); + input_report_key(button_dev, KEY_POWER, 0); + input_sync(button_dev); +} + +static struct pmi_handler cbe_pmi_handler = { + .type = PMI_TYPE_POWER_BUTTON, + .handle_pmi_message = cbe_powerbutton_handle_pmi, +}; + +static int __init cbe_powerbutton_init(void) +{ + int ret = 0; + struct input_dev *dev; + + if (!machine_is_compatible("IBM,CBPLUS-1.0")) { + printk(KERN_ERR "%s: Not a cell blade.\n", __func__); + ret = -ENODEV; + goto out; + } + + dev = input_allocate_device(); + if (!dev) { + ret = -ENOMEM; + printk(KERN_ERR "%s: Not enough memory.\n", __func__); + goto out; + } + + set_bit(EV_KEY, dev->evbit); + set_bit(KEY_POWER, dev->keybit); + + dev->name = "Power Button"; + dev->id.bustype = BUS_HOST; + + /* this makes the button look like an acpi power button + * no clue whether anyone relies on that though */ + dev->id.product = 0x02; + dev->phys = "LNXPWRBN/button/input0"; + + button_pdev = platform_device_register_simple("power_button", 0, NULL, 0); + if (IS_ERR(button_pdev)) { + ret = PTR_ERR(button_pdev); + goto out_free_input; + } + + dev->dev.parent = &button_pdev->dev; + ret = input_register_device(dev); + if (ret) { + printk(KERN_ERR "%s: Failed to register device\n", __func__); + goto out_free_pdev; + } + + button_dev = dev; + + ret = pmi_register_handler(&cbe_pmi_handler); + if (ret) { + printk(KERN_ERR "%s: Failed to register with pmi.\n", __func__); + goto out_free_pdev; + } + + goto out; + +out_free_pdev: + platform_device_unregister(button_pdev); +out_free_input: + input_free_device(dev); +out: + return ret; +} + +static void __exit cbe_powerbutton_exit(void) +{ + pmi_unregister_handler(&cbe_pmi_handler); + platform_device_unregister(button_pdev); + input_free_device(button_dev); +} + +module_init(cbe_powerbutton_init); +module_exit(cbe_powerbutton_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>"); diff --git a/arch/powerpc/platforms/cell/cpufreq_spudemand.c b/arch/powerpc/platforms/cell/cpufreq_spudemand.c new file mode 100644 index 000000000000..a3c6c01bd6db --- /dev/null +++ b/arch/powerpc/platforms/cell/cpufreq_spudemand.c @@ -0,0 +1,184 @@ +/* + * spu aware cpufreq governor for the cell processor + * + * © Copyright IBM Corporation 2006-2008 + * + * Author: Christian Krafft <krafft@de.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/cpufreq.h> +#include <linux/sched.h> +#include <linux/timer.h> +#include <linux/workqueue.h> +#include <asm/atomic.h> +#include <asm/machdep.h> +#include <asm/spu.h> + +#define POLL_TIME 100000 /* in µs */ +#define EXP 753 /* exp(-1) in fixed-point */ + +struct spu_gov_info_struct { + unsigned long busy_spus; /* fixed-point */ + struct cpufreq_policy *policy; + struct delayed_work work; + unsigned int poll_int; /* µs */ +}; +static DEFINE_PER_CPU(struct spu_gov_info_struct, spu_gov_info); + +static struct workqueue_struct *kspugov_wq; + +static int calc_freq(struct spu_gov_info_struct *info) +{ + int cpu; + int busy_spus; + + cpu = info->policy->cpu; + busy_spus = atomic_read(&cbe_spu_info[cpu_to_node(cpu)].busy_spus); + + CALC_LOAD(info->busy_spus, EXP, busy_spus * FIXED_1); + pr_debug("cpu %d: busy_spus=%d, info->busy_spus=%ld\n", + cpu, busy_spus, info->busy_spus); + + return info->policy->max * info->busy_spus / FIXED_1; +} + +static void spu_gov_work(struct work_struct *work) +{ + struct spu_gov_info_struct *info; + int delay; + unsigned long target_freq; + + info = container_of(work, struct spu_gov_info_struct, work.work); + + /* after cancel_delayed_work_sync we unset info->policy */ + BUG_ON(info->policy == NULL); + + target_freq = calc_freq(info); + __cpufreq_driver_target(info->policy, target_freq, CPUFREQ_RELATION_H); + + delay = usecs_to_jiffies(info->poll_int); + queue_delayed_work_on(info->policy->cpu, kspugov_wq, &info->work, delay); +} + +static void spu_gov_init_work(struct spu_gov_info_struct *info) +{ + int delay = usecs_to_jiffies(info->poll_int); + INIT_DELAYED_WORK_DEFERRABLE(&info->work, spu_gov_work); + queue_delayed_work_on(info->policy->cpu, kspugov_wq, &info->work, delay); +} + +static void spu_gov_cancel_work(struct spu_gov_info_struct *info) +{ + cancel_delayed_work_sync(&info->work); +} + +static int spu_gov_govern(struct cpufreq_policy *policy, unsigned int event) +{ + unsigned int cpu = policy->cpu; + struct spu_gov_info_struct *info, *affected_info; + int i; + int ret = 0; + + info = &per_cpu(spu_gov_info, cpu); + + switch (event) { + case CPUFREQ_GOV_START: + if (!cpu_online(cpu)) { + printk(KERN_ERR "cpu %d is not online\n", cpu); + ret = -EINVAL; + break; + } + + if (!policy->cur) { + printk(KERN_ERR "no cpu specified in policy\n"); + ret = -EINVAL; + break; + } + + /* initialize spu_gov_info for all affected cpus */ + for_each_cpu_mask(i, policy->cpus) { + affected_info = &per_cpu(spu_gov_info, i); + affected_info->policy = policy; + } + + info->poll_int = POLL_TIME; + + /* setup timer */ + spu_gov_init_work(info); + + break; + + case CPUFREQ_GOV_STOP: + /* cancel timer */ + spu_gov_cancel_work(info); + + /* clean spu_gov_info for all affected cpus */ + for_each_cpu_mask (i, policy->cpus) { + info = &per_cpu(spu_gov_info, i); + info->policy = NULL; + } + + break; + } + + return ret; +} + +static struct cpufreq_governor spu_governor = { + .name = "spudemand", + .governor = spu_gov_govern, + .owner = THIS_MODULE, +}; + +/* + * module init and destoy + */ + +static int __init spu_gov_init(void) +{ + int ret; + + kspugov_wq = create_workqueue("kspugov"); + if (!kspugov_wq) { + printk(KERN_ERR "creation of kspugov failed\n"); + ret = -EFAULT; + goto out; + } + + ret = cpufreq_register_governor(&spu_governor); + if (ret) { + printk(KERN_ERR "registration of governor failed\n"); + destroy_workqueue(kspugov_wq); + goto out; + } +out: + return ret; +} + +static void __exit spu_gov_exit(void) +{ + cpufreq_unregister_governor(&spu_governor); + destroy_workqueue(kspugov_wq); +} + + +module_init(spu_gov_init); +module_exit(spu_gov_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>"); + diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index eeacb3a52ca1..208005ca262c 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -173,7 +173,8 @@ static void invalidate_tce_cache(struct cbe_iommu *iommu, unsigned long *pte, } static void tce_build_cell(struct iommu_table *tbl, long index, long npages, - unsigned long uaddr, enum dma_data_direction direction) + unsigned long uaddr, enum dma_data_direction direction, + struct dma_attrs *attrs) { int i; unsigned long *io_pte, base_pte; @@ -198,6 +199,8 @@ static void tce_build_cell(struct iommu_table *tbl, long index, long npages, base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW | (window->ioid & IOPTE_IOID_Mask); #endif + if (unlikely(dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs))) + base_pte &= ~IOPTE_SO_RW; io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset); @@ -519,7 +522,7 @@ cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np, __set_bit(0, window->table.it_map); tce_build_cell(&window->table, window->table.it_offset, 1, - (unsigned long)iommu->pad_page, DMA_TO_DEVICE); + (unsigned long)iommu->pad_page, DMA_TO_DEVICE, NULL); window->table.it_hint = window->table.it_blocksize; return window; @@ -538,7 +541,9 @@ static struct cbe_iommu *cell_iommu_for_node(int nid) static unsigned long cell_dma_direct_offset; static unsigned long dma_iommu_fixed_base; -struct dma_mapping_ops dma_iommu_fixed_ops; + +/* iommu_fixed_is_weak is set if booted with iommu_fixed=weak */ +static int iommu_fixed_is_weak; static struct iommu_table *cell_get_iommu_table(struct device *dev) { @@ -562,6 +567,98 @@ static struct iommu_table *cell_get_iommu_table(struct device *dev) return &window->table; } +/* A coherent allocation implies strong ordering */ + +static void *dma_fixed_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag) +{ + if (iommu_fixed_is_weak) + return iommu_alloc_coherent(dev, cell_get_iommu_table(dev), + size, dma_handle, + device_to_mask(dev), flag, + dev->archdata.numa_node); + else + return dma_direct_ops.alloc_coherent(dev, size, dma_handle, + flag); +} + +static void dma_fixed_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle) +{ + if (iommu_fixed_is_weak) + iommu_free_coherent(cell_get_iommu_table(dev), size, vaddr, + dma_handle); + else + dma_direct_ops.free_coherent(dev, size, vaddr, dma_handle); +} + +static dma_addr_t dma_fixed_map_single(struct device *dev, void *ptr, + size_t size, + enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs)) + return dma_direct_ops.map_single(dev, ptr, size, direction, + attrs); + else + return iommu_map_single(dev, cell_get_iommu_table(dev), ptr, + size, device_to_mask(dev), direction, + attrs); +} + +static void dma_fixed_unmap_single(struct device *dev, dma_addr_t dma_addr, + size_t size, + enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs)) + dma_direct_ops.unmap_single(dev, dma_addr, size, direction, + attrs); + else + iommu_unmap_single(cell_get_iommu_table(dev), dma_addr, size, + direction, attrs); +} + +static int dma_fixed_map_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs)) + return dma_direct_ops.map_sg(dev, sg, nents, direction, attrs); + else + return iommu_map_sg(dev, cell_get_iommu_table(dev), sg, nents, + device_to_mask(dev), direction, attrs); +} + +static void dma_fixed_unmap_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs)) + dma_direct_ops.unmap_sg(dev, sg, nents, direction, attrs); + else + iommu_unmap_sg(cell_get_iommu_table(dev), sg, nents, direction, + attrs); +} + +static int dma_fixed_dma_supported(struct device *dev, u64 mask) +{ + return mask == DMA_64BIT_MASK; +} + +static int dma_set_mask_and_switch(struct device *dev, u64 dma_mask); + +struct dma_mapping_ops dma_iommu_fixed_ops = { + .alloc_coherent = dma_fixed_alloc_coherent, + .free_coherent = dma_fixed_free_coherent, + .map_single = dma_fixed_map_single, + .unmap_single = dma_fixed_unmap_single, + .map_sg = dma_fixed_map_sg, + .unmap_sg = dma_fixed_unmap_sg, + .dma_supported = dma_fixed_dma_supported, + .set_dma_mask = dma_set_mask_and_switch, +}; + static void cell_dma_dev_setup_fixed(struct device *dev); static void cell_dma_dev_setup(struct device *dev) @@ -918,9 +1015,16 @@ static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu, pr_debug("iommu: mapping 0x%lx pages from 0x%lx\n", fsize, fbase); - base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW + base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M | (cell_iommu_get_ioid(np) & IOPTE_IOID_Mask); + if (iommu_fixed_is_weak) + pr_info("IOMMU: Using weak ordering for fixed mapping\n"); + else { + pr_info("IOMMU: Using strong ordering for fixed mapping\n"); + base_pte |= IOPTE_SO_RW; + } + for (uaddr = 0; uaddr < fsize; uaddr += (1 << 24)) { /* Don't touch the dynamic region */ ioaddr = uaddr + fbase; @@ -1036,9 +1140,6 @@ static int __init cell_iommu_fixed_mapping_init(void) cell_iommu_setup_window(iommu, np, dbase, dsize, 0); } - dma_iommu_fixed_ops = dma_direct_ops; - dma_iommu_fixed_ops.set_dma_mask = dma_set_mask_and_switch; - dma_iommu_ops.set_dma_mask = dma_set_mask_and_switch; set_pci_dma_ops(&dma_iommu_ops); @@ -1052,6 +1153,9 @@ static int __init setup_iommu_fixed(char *str) if (strcmp(str, "off") == 0) iommu_fixed_disabled = 1; + else if (strcmp(str, "weak") == 0) + iommu_fixed_is_weak = 1; + return 1; } __setup("iommu_fixed=", setup_iommu_fixed); diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c index 8a3631ce912b..efdacc829576 100644 --- a/arch/powerpc/platforms/cell/pervasive.c +++ b/arch/powerpc/platforms/cell/pervasive.c @@ -38,8 +38,6 @@ #include "pervasive.h" -static int sysreset_hack; - static void cbe_power_save(void) { unsigned long ctrl, thread_switch_control; @@ -87,9 +85,6 @@ static void cbe_power_save(void) static int cbe_system_reset_exception(struct pt_regs *regs) { - int cpu; - struct cbe_pmd_regs __iomem *pmd; - switch (regs->msr & SRR1_WAKEMASK) { case SRR1_WAKEEE: do_IRQ(regs); @@ -98,19 +93,7 @@ static int cbe_system_reset_exception(struct pt_regs *regs) timer_interrupt(regs); break; case SRR1_WAKEMT: - /* - * The BMC can inject user triggered system reset exceptions, - * but cannot set the system reset reason in srr1, - * so check an extra register here. - */ - if (sysreset_hack && (cpu = smp_processor_id()) == 0) { - pmd = cbe_get_cpu_pmd_regs(cpu); - if (in_be64(&pmd->ras_esc_0) & 0xffff) { - out_be64(&pmd->ras_esc_0, 0); - return 0; - } - } - break; + return cbe_sysreset_hack(); #ifdef CONFIG_CBE_RAS case SRR1_WAKESYSERR: cbe_system_error_exception(regs); @@ -134,8 +117,6 @@ void __init cbe_pervasive_init(void) if (!cpu_has_feature(CPU_FTR_PAUSE_ZERO)) return; - sysreset_hack = machine_is_compatible("IBM,CBPLUS-1.0"); - for_each_possible_cpu(cpu) { struct cbe_pmd_regs __iomem *regs = cbe_get_cpu_pmd_regs(cpu); if (!regs) @@ -144,12 +125,6 @@ void __init cbe_pervasive_init(void) /* Enable Pause(0) control bit */ out_be64(®s->pmcr, in_be64(®s->pmcr) | CBE_PMD_PAUSE_ZERO_CONTROL); - - /* Enable JTAG system-reset hack */ - if (sysreset_hack) - out_be32(®s->fir_mode_reg, - in_be32(®s->fir_mode_reg) | - CBE_PMD_FIR_MODE_M8); } ppc_md.power_save = cbe_power_save; diff --git a/arch/powerpc/platforms/cell/pervasive.h b/arch/powerpc/platforms/cell/pervasive.h index 7b50947f8044..fd4d7b7092b4 100644 --- a/arch/powerpc/platforms/cell/pervasive.h +++ b/arch/powerpc/platforms/cell/pervasive.h @@ -30,4 +30,13 @@ extern void cbe_system_error_exception(struct pt_regs *regs); extern void cbe_maintenance_exception(struct pt_regs *regs); extern void cbe_thermal_exception(struct pt_regs *regs); +#ifdef CONFIG_PPC_IBM_CELL_RESETBUTTON +extern int cbe_sysreset_hack(void); +#else +static inline int cbe_sysreset_hack(void) +{ + return 1; +} +#endif /* CONFIG_PPC_IBM_CELL_RESETBUTTON */ + #endif diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c index 505f9b9bdf0c..2a14b052abcd 100644 --- a/arch/powerpc/platforms/cell/ras.c +++ b/arch/powerpc/platforms/cell/ras.c @@ -236,6 +236,52 @@ static struct notifier_block cbe_ptcal_reboot_notifier = { .notifier_call = cbe_ptcal_notify_reboot }; +#ifdef CONFIG_PPC_IBM_CELL_RESETBUTTON +static int sysreset_hack; + +static int __init cbe_sysreset_init(void) +{ + struct cbe_pmd_regs __iomem *regs; + + sysreset_hack = machine_is_compatible("IBM,CBPLUS-1.0"); + if (!sysreset_hack) + return 0; + + regs = cbe_get_cpu_pmd_regs(0); + if (!regs) + return 0; + + /* Enable JTAG system-reset hack */ + out_be32(®s->fir_mode_reg, + in_be32(®s->fir_mode_reg) | + CBE_PMD_FIR_MODE_M8); + + return 0; +} +device_initcall(cbe_sysreset_init); + +int cbe_sysreset_hack(void) +{ + struct cbe_pmd_regs __iomem *regs; + + /* + * The BMC can inject user triggered system reset exceptions, + * but cannot set the system reset reason in srr1, + * so check an extra register here. + */ + if (sysreset_hack && (smp_processor_id() == 0)) { + regs = cbe_get_cpu_pmd_regs(0); + if (!regs) + return 0; + if (in_be64(®s->ras_esc_0) & 0x0000ffff) { + out_be64(®s->ras_esc_0, 0); + return 0; + } + } + return 1; +} +#endif /* CONFIG_PPC_IBM_CELL_RESETBUTTON */ + int __init cbe_ptcal_init(void) { int ret; diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c index afc9141be63e..ef74a0763ec1 100644 --- a/arch/powerpc/platforms/fsl_uli1575.c +++ b/arch/powerpc/platforms/fsl_uli1575.c @@ -51,15 +51,13 @@ u8 uli_pirq_to_irq[8] = { ULI_8259_NONE, /* PIRQH */ }; -/* set in board code if you want this quirks to do something */ -int uses_fsl_uli_m1575; - /* Bridge */ static void __devinit early_uli5249(struct pci_dev *dev) { unsigned char temp; - if (!uses_fsl_uli_m1575) + if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) && + !machine_is(mpc8572_ds)) return; pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_IO | @@ -82,7 +80,8 @@ static void __devinit quirk_uli1575(struct pci_dev *dev) { int i; - if (!uses_fsl_uli_m1575) + if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) && + !machine_is(mpc8572_ds)) return; /* @@ -150,7 +149,8 @@ static void __devinit quirk_final_uli1575(struct pci_dev *dev) * IRQ 14: Edge * IRQ 15: Edge */ - if (!uses_fsl_uli_m1575) + if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) && + !machine_is(mpc8572_ds)) return; outb(0xfa, 0x4d0); @@ -176,7 +176,8 @@ static void __devinit quirk_uli5288(struct pci_dev *dev) unsigned char c; unsigned int d; - if (!uses_fsl_uli_m1575) + if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) && + !machine_is(mpc8572_ds)) return; /* read/write lock */ @@ -200,7 +201,8 @@ static void __devinit quirk_uli5229(struct pci_dev *dev) { unsigned short temp; - if (!uses_fsl_uli_m1575) + if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) && + !machine_is(mpc8572_ds)) return; pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE | @@ -221,7 +223,7 @@ static void __devinit quirk_final_uli5249(struct pci_dev *dev) for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { if ((bus->resource[i]) && (bus->resource[i]->flags & IORESOURCE_MEM)) { - dummy = ioremap(bus->resource[i]->start, 0x4); + dummy = ioremap(bus->resource[i]->end - 3, 0x4); if (dummy) { in_8(dummy); iounmap(dummy); @@ -238,6 +240,103 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5249, quirk_final_uli5249); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x1575, quirk_final_uli1575); +static void __devinit hpcd_quirk_uli1575(struct pci_dev *dev) +{ + u32 temp32; + + if (!machine_is(mpc86xx_hpcd)) + return; + + /* Disable INTx */ + pci_read_config_dword(dev, 0x48, &temp32); + pci_write_config_dword(dev, 0x48, (temp32 | 1<<26)); + + /* Enable sideband interrupt */ + pci_read_config_dword(dev, 0x90, &temp32); + pci_write_config_dword(dev, 0x90, (temp32 | 1<<22)); +} + +static void __devinit hpcd_quirk_uli5288(struct pci_dev *dev) +{ + unsigned char c; + unsigned short temp; + + if (!machine_is(mpc86xx_hpcd)) + return; + + /* Interrupt Disable, Needed when SATA disabled */ + pci_read_config_word(dev, PCI_COMMAND, &temp); + temp |= 1<<10; + pci_write_config_word(dev, PCI_COMMAND, temp); + + pci_read_config_byte(dev, 0x83, &c); + c |= 0x80; + pci_write_config_byte(dev, 0x83, c); + + pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01); + pci_write_config_byte(dev, PCI_CLASS_DEVICE, 0x06); + + pci_read_config_byte(dev, 0x83, &c); + c &= 0x7f; + pci_write_config_byte(dev, 0x83, c); +} + +/* + * Since 8259PIC was disabled on the board, the IDE device can not + * use the legacy IRQ, we need to let the IDE device work under + * native mode and use the interrupt line like other PCI devices. + * IRQ14 is a sideband interrupt from IDE device to CPU and we use this + * as the interrupt for IDE device. + */ +static void __devinit hpcd_quirk_uli5229(struct pci_dev *dev) +{ + unsigned char c; + + if (!machine_is(mpc86xx_hpcd)) + return; + + pci_read_config_byte(dev, 0x4b, &c); + c |= 0x10; + pci_write_config_byte(dev, 0x4b, c); +} + +/* + * SATA interrupt pin bug fix + * There's a chip bug for 5288, The interrupt pin should be 2, + * not the read only value 1, So it use INTB#, not INTA# which + * actually used by the IDE device 5229. + * As of this bug, during the PCI initialization, 5288 read the + * irq of IDE device from the device tree, this function fix this + * bug by re-assigning a correct irq to 5288. + * + */ +static void __devinit hpcd_final_uli5288(struct pci_dev *dev) +{ + struct pci_controller *hose = pci_bus_to_host(dev->bus); + struct device_node *hosenode = hose ? hose->dn : NULL; + struct of_irq oirq; + int virq, pin = 2; + u32 laddr[3]; + + if (!machine_is(mpc86xx_hpcd)) + return; + + if (!hosenode) + return; + + laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8); + laddr[1] = laddr[2] = 0; + of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq); + virq = irq_create_of_mapping(oirq.controller, oirq.specifier, + oirq.size); + dev->irq = virq; +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, hpcd_quirk_uli1575); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, hpcd_quirk_uli5288); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, hpcd_quirk_uli5229); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, hpcd_final_uli5288); + int uli_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn) { diff --git a/arch/powerpc/platforms/iseries/Kconfig b/arch/powerpc/platforms/iseries/Kconfig index 761d9e971fc4..ea3e541ac74f 100644 --- a/arch/powerpc/platforms/iseries/Kconfig +++ b/arch/powerpc/platforms/iseries/Kconfig @@ -2,6 +2,7 @@ config PPC_ISERIES bool "IBM Legacy iSeries" depends on PPC_MULTIPLATFORM && PPC64 select PPC_INDIRECT_IO + select PPC_PCI_CHOICE if EMBEDDED menu "iSeries device drivers" depends on PPC_ISERIES diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c index ab5d8687c3cf..bc818e4e2033 100644 --- a/arch/powerpc/platforms/iseries/iommu.c +++ b/arch/powerpc/platforms/iseries/iommu.c @@ -42,7 +42,8 @@ #include <asm/iseries/iommu.h> static void tce_build_iSeries(struct iommu_table *tbl, long index, long npages, - unsigned long uaddr, enum dma_data_direction direction) + unsigned long uaddr, enum dma_data_direction direction, + struct dma_attrs *attrs) { u64 rc; u64 tce, rpn; diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c index 86967bdd8774..70541b7a5013 100644 --- a/arch/powerpc/platforms/pasemi/iommu.c +++ b/arch/powerpc/platforms/pasemi/iommu.c @@ -85,7 +85,8 @@ static int iommu_table_iobmap_inited; static void iobmap_build(struct iommu_table *tbl, long index, long npages, unsigned long uaddr, - enum dma_data_direction direction) + enum dma_data_direction direction, + struct dma_attrs *attrs) { u32 *ip; u32 rpn; diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig index a5f4e95dfc3d..920cf7a454b1 100644 --- a/arch/powerpc/platforms/ps3/Kconfig +++ b/arch/powerpc/platforms/ps3/Kconfig @@ -8,6 +8,7 @@ config PPC_PS3 select USB_ARCH_HAS_EHCI select USB_EHCI_BIG_ENDIAN_MMIO select MEMORY_HOTPLUG + select PPC_PCI_CHOICE help This option enables support for the Sony PS3 game console and other platforms using the PS3 hypervisor. Enabling this diff --git a/arch/powerpc/platforms/ps3/device-init.c b/arch/powerpc/platforms/ps3/device-init.c index 3866debfa3c4..ffdd8e963fbd 100644 --- a/arch/powerpc/platforms/ps3/device-init.c +++ b/arch/powerpc/platforms/ps3/device-init.c @@ -486,6 +486,7 @@ static int __init ps3_register_graphics_devices(void) return -ENOMEM; p->dev.match_id = PS3_MATCH_ID_GRAPHICS; + p->dev.match_sub_id = PS3_MATCH_SUB_ID_FB; p->dev.dev_type = PS3_DEVICE_TYPE_IOC0; result = ps3_system_bus_device_register(&p->dev); diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c index d66c3628a112..280ee88cb0b0 100644 --- a/arch/powerpc/platforms/ps3/system-bus.c +++ b/arch/powerpc/platforms/ps3/system-bus.c @@ -347,16 +347,23 @@ static int ps3_system_bus_match(struct device *_dev, struct ps3_system_bus_driver *drv = ps3_drv_to_system_bus_drv(_drv); struct ps3_system_bus_device *dev = ps3_dev_to_system_bus_dev(_dev); - result = dev->match_id == drv->match_id; + if (!dev->match_sub_id) + result = dev->match_id == drv->match_id; + else + result = dev->match_sub_id == drv->match_sub_id && + dev->match_id == drv->match_id; if (result) - pr_info("%s:%d: dev=%u(%s), drv=%u(%s): match\n", __func__, - __LINE__, dev->match_id, dev->core.bus_id, - drv->match_id, drv->core.name); + pr_info("%s:%d: dev=%u.%u(%s), drv=%u.%u(%s): match\n", + __func__, __LINE__, + dev->match_id, dev->match_sub_id, dev->core.bus_id, + drv->match_id, drv->match_sub_id, drv->core.name); else - pr_debug("%s:%d: dev=%u(%s), drv=%u(%s): miss\n", __func__, - __LINE__, dev->match_id, dev->core.bus_id, - drv->match_id, drv->core.name); + pr_debug("%s:%d: dev=%u.%u(%s), drv=%u.%u(%s): miss\n", + __func__, __LINE__, + dev->match_id, dev->match_sub_id, dev->core.bus_id, + drv->match_id, drv->match_sub_id, drv->core.name); + return result; } diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index 07fe5b69b9e2..757c0296e0b8 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -7,6 +7,7 @@ config PPC_PSERIES select RTAS_ERROR_LOGGING select PPC_UDBG_16550 select PPC_NATIVE + select PPC_PCI_CHOICE if EMBEDDED default y config PPC_SPLPAR diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index c027f0a70a04..54816d75b578 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -75,9 +75,9 @@ */ /* If a device driver keeps reading an MMIO register in an interrupt - * handler after a slot isolation event has occurred, we assume it - * is broken and panic. This sets the threshold for how many read - * attempts we allow before panicking. + * handler after a slot isolation event, it might be broken. + * This sets the threshold for how many read attempts we allow + * before printing an error message. */ #define EEH_MAX_FAILS 2100000 @@ -470,6 +470,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) unsigned long flags; struct pci_dn *pdn; int rc = 0; + const char *location; total_mmio_ffs++; @@ -509,18 +510,15 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) rc = 1; if (pdn->eeh_mode & EEH_MODE_ISOLATED) { pdn->eeh_check_count ++; - if (pdn->eeh_check_count >= EEH_MAX_FAILS) { - printk (KERN_ERR "EEH: Device driver ignored %d bad reads, panicing\n", - pdn->eeh_check_count); + if (pdn->eeh_check_count % EEH_MAX_FAILS == 0) { + location = of_get_property(dn, "ibm,loc-code", NULL); + printk (KERN_ERR "EEH: %d reads ignored for recovering device at " + "location=%s driver=%s pci addr=%s\n", + pdn->eeh_check_count, location, + dev->driver->name, pci_name(dev)); + printk (KERN_ERR "EEH: Might be infinite loop in %s driver\n", + dev->driver->name); dump_stack(); - msleep(5000); - - /* re-read the slot reset state */ - if (read_slot_reset_state(pdn, rets) != 0) - rets[0] = -1; /* reset state unknown */ - - /* If we are here, then we hit an infinite loop. Stop. */ - panic("EEH: MMIO halt (%d) on device:%s\n", rets[0], pci_name(dev)); } goto dn_unlock; } diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index 9a12908510fb..5377dd4b849a 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -50,7 +50,8 @@ static void tce_build_pSeries(struct iommu_table *tbl, long index, long npages, unsigned long uaddr, - enum dma_data_direction direction) + enum dma_data_direction direction, + struct dma_attrs *attrs) { u64 proto_tce; u64 *tcep; @@ -95,7 +96,8 @@ static unsigned long tce_get_pseries(struct iommu_table *tbl, long index) static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages, unsigned long uaddr, - enum dma_data_direction direction) + enum dma_data_direction direction, + struct dma_attrs *attrs) { u64 rc; u64 proto_tce, tce; @@ -127,7 +129,8 @@ static DEFINE_PER_CPU(u64 *, tce_page) = NULL; static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages, unsigned long uaddr, - enum dma_data_direction direction) + enum dma_data_direction direction, + struct dma_attrs *attrs) { u64 rc; u64 proto_tce; @@ -136,7 +139,8 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum, long l, limit; if (npages == 1) { - tce_build_pSeriesLP(tbl, tcenum, npages, uaddr, direction); + tce_build_pSeriesLP(tbl, tcenum, npages, uaddr, + direction, attrs); return; } @@ -150,7 +154,7 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum, /* If allocation fails, fall back to the loop implementation */ if (!tcep) { tce_build_pSeriesLP(tbl, tcenum, npages, uaddr, - direction); + direction, attrs); return; } __get_cpu_var(tce_page) = tcep; |