diff options
Diffstat (limited to 'arch/powerpc')
| -rw-r--r-- | arch/powerpc/Kconfig | 13 | ||||
| -rw-r--r-- | arch/powerpc/Makefile | 9 | ||||
| -rw-r--r-- | arch/powerpc/boot/crt0.S | 23 | ||||
| -rw-r--r-- | arch/powerpc/configs/ppc64_defconfig | 1579 | ||||
| -rw-r--r-- | arch/powerpc/configs/pseries_defconfig | 1 | ||||
| -rw-r--r-- | arch/powerpc/kernel/Makefile | 7 | ||||
| -rw-r--r-- | arch/powerpc/kernel/align.c | 530 | ||||
| -rw-r--r-- | arch/powerpc/kernel/idle_64.c | 121 | ||||
| -rw-r--r-- | arch/powerpc/kernel/misc_32.S | 8 | ||||
| -rw-r--r-- | arch/powerpc/kernel/nvram_64.c | 742 | ||||
| -rw-r--r-- | arch/powerpc/kernel/rtas-rtc.c | 6 | ||||
| -rw-r--r-- | arch/powerpc/kernel/time.c | 28 | ||||
| -rw-r--r-- | arch/powerpc/platforms/chrp/setup.c | 11 | ||||
| -rw-r--r-- | arch/powerpc/platforms/chrp/smp.c | 1 | ||||
| -rw-r--r-- | arch/powerpc/platforms/chrp/time.c | 3 | ||||
| -rw-r--r-- | arch/powerpc/platforms/maple/time.c | 11 | ||||
| -rw-r--r-- | arch/powerpc/platforms/pseries/eeh.c | 3 | ||||
| -rw-r--r-- | arch/powerpc/platforms/pseries/setup.c | 4 |
18 files changed, 3049 insertions, 51 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 94df74bcc0ee..bb2efdd566a9 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -598,19 +598,6 @@ config ARCH_MEMORY_PROBE def_bool y depends on MEMORY_HOTPLUG -# Some NUMA nodes have memory ranges that span -# other nodes. Even though a pfn is valid and -# between a node's start and end pfns, it may not -# reside on that node. -# -# This is a relatively temporary hack that should -# be able to go away when sparsemem is fully in -# place - -config NODES_SPAN_OTHER_NODES - def_bool y - depends on NEED_MULTIPLE_NODES - config PPC_64K_PAGES bool "64k page size" depends on PPC64 diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 99dbea8c5c50..98f67c78d1bd 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -33,6 +33,8 @@ endif export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY +KBUILD_DEFCONFIG := $(shell uname -m)_defconfig + ifeq ($(CONFIG_PPC64),y) OLDARCH := ppc64 SZ := 64 @@ -111,9 +113,6 @@ cpu-as-$(CONFIG_E200) += -Wa,-me200 AFLAGS += $(cpu-as-y) CFLAGS += $(cpu-as-y) -# Default to the common case. -KBUILD_DEFCONFIG := common_defconfig - head-y := arch/powerpc/kernel/head_32.o head-$(CONFIG_PPC64) := arch/powerpc/kernel/head_64.o head-$(CONFIG_8xx) := arch/powerpc/kernel/head_8xx.o @@ -125,11 +124,11 @@ head-$(CONFIG_PPC64) += arch/powerpc/kernel/entry_64.o head-$(CONFIG_PPC_FPU) += arch/powerpc/kernel/fpu.o core-y += arch/powerpc/kernel/ \ - arch/$(OLDARCH)/kernel/ \ arch/powerpc/mm/ \ arch/powerpc/lib/ \ arch/powerpc/sysdev/ \ arch/powerpc/platforms/ +core-$(CONFIG_PPC32) += arch/ppc/kernel/ core-$(CONFIG_MATH_EMULATION) += arch/ppc/math-emu/ core-$(CONFIG_XMON) += arch/powerpc/xmon/ core-$(CONFIG_APUS) += arch/ppc/amiga/ @@ -165,7 +164,7 @@ define archhelp @echo ' (your) ~/bin/installkernel or' @echo ' (distribution) /sbin/installkernel or' @echo ' install to $$(INSTALL_PATH) and run lilo' - @echo ' *_defconfig - Select default config from arch/$(ARCH)/ppc/configs' + @echo ' *_defconfig - Select default config from arch/$(ARCH)/configs' endef archclean: diff --git a/arch/powerpc/boot/crt0.S b/arch/powerpc/boot/crt0.S index 9cc442263939..d2f2ace56cd3 100644 --- a/arch/powerpc/boot/crt0.S +++ b/arch/powerpc/boot/crt0.S @@ -14,43 +14,42 @@ .text .globl _zimage_start _zimage_start: - bl reloc_offset + bl 1f -reloc_offset: +1: mflr r0 - lis r9,reloc_offset@ha - addi r9,r9,reloc_offset@l + lis r9,1b@ha + addi r9,r9,1b@l subf. r0,r9,r0 - beq clear_caches + beq 3f -reloc_got2: lis r9,__got2_start@ha addi r9,r9,__got2_start@l lis r8,__got2_end@ha addi r8,r8,__got2_end@l subf. r8,r9,r8 - beq clear_caches + beq 3f srwi. r8,r8,2 mtctr r8 add r9,r0,r9 -reloc_got2_loop: +2: lwz r8,0(r9) add r8,r8,r0 stw r8,0(r9) addi r9,r9,4 - bdnz reloc_got2_loop + bdnz 2b -clear_caches: +3: lis r9,_start@h add r9,r0,r9 lis r8,_etext@ha addi r8,r8,_etext@l add r8,r0,r8 -1: dcbf r0,r9 +4: dcbf r0,r9 icbi r0,r9 addi r9,r9,0x20 cmplwi 0,r9,8 - blt 1b + blt 4b sync isync diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig new file mode 100644 index 000000000000..b5ba3bbd96fb --- /dev/null +++ b/arch/powerpc/configs/ppc64_defconfig @@ -0,0 +1,1579 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.15-rc1 +# Fri Nov 18 16:23:24 2005 +# +CONFIG_PPC64=y +CONFIG_64BIT=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y + +# +# Processor support +# +# CONFIG_POWER4_ONLY is not set +CONFIG_POWER3=y +CONFIG_POWER4=y +CONFIG_PPC_FPU=y +CONFIG_ALTIVEC=y +CONFIG_PPC_STD_MMU=y +CONFIG_SMP=y +CONFIG_NR_CPUS=32 + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_CPUSETS=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Platform support +# +CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_ISERIES is not set +# CONFIG_EMBEDDED6xx is not set +# CONFIG_APUS is not set +CONFIG_PPC_PSERIES=y +CONFIG_PPC_PMAC=y +CONFIG_PPC_PMAC64=y +CONFIG_PPC_MAPLE=y +# CONFIG_PPC_CELL is not set +CONFIG_PPC_OF=y +CONFIG_XICS=y +CONFIG_U3_DART=y +CONFIG_MPIC=y +CONFIG_PPC_RTAS=y +CONFIG_RTAS_ERROR_LOGGING=y +CONFIG_RTAS_PROC=y +CONFIG_RTAS_FLASH=m +# CONFIG_MMIO_NVRAM is not set +CONFIG_MPIC_BROKEN_U3=y +CONFIG_IBMVIO=y +# CONFIG_PPC_MPC106 is not set +CONFIG_GENERIC_TBSYNC=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_PMAC64=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Kernel options +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=m +CONFIG_FORCE_MAX_ZONEORDER=13 +CONFIG_IOMMU_VMERGE=y +CONFIG_HOTPLUG_CPU=y +CONFIG_KEXEC=y +CONFIG_IRQ_ALL_CPUS=y +CONFIG_PPC_SPLPAR=y +CONFIG_EEH=y +CONFIG_SCANLOG=m +CONFIG_LPARCFG=y +# CONFIG_NUMA is not set +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_EXTREME=y +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_SCHED_SMT is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC_I8259=y +# CONFIG_PPC_INDIRECT_PCI is not set +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCI_LEGACY_PROC is not set +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +CONFIG_HOTPLUG_PCI=m +# CONFIG_HOTPLUG_PCI_FAKE is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set +CONFIG_HOTPLUG_PCI_RPA=m +CONFIG_HOTPLUG_PCI_RPA_DLPAR=m +CONFIG_KERNEL_START=0xc000000000000000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=y +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=y +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +CONFIG_IP_NF_CT_ACCT=y +CONFIG_IP_NF_CONNTRACK_MARK=y +CONFIG_IP_NF_CONNTRACK_EVENTS=y +CONFIG_IP_NF_CONNTRACK_NETLINK=m +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +CONFIG_IP_NF_MATCH_DCCP=m +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_CONNMARK=m +CONFIG_IP_NF_MATCH_CONNBYTES=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_MATCH_STRING=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CONNMARK=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +CONFIG_BLK_DEV_FD=y +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +CONFIG_BLK_DEV_AMD74XX=y +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +CONFIG_BLK_DEV_IDE_PMAC=y +CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y +CONFIG_BLK_DEV_IDEDMA_PMAC=y +# CONFIG_BLK_DEV_IDE_PMAC_BLINK is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +CONFIG_SCSI_FC_ATTRS=y +CONFIG_SCSI_ISCSI_ATTRS=m +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +CONFIG_SCSI_SATA=y +# CONFIG_SCSI_SATA_AHCI is not set +CONFIG_SCSI_SATA_SVW=y +# CONFIG_SCSI_ATA_PIIX is not set +# CONFIG_SCSI_SATA_MV is not set +# CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_PDC_ADMA is not set +# CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_SATA_SX4 is not set +# CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIL24 is not set +# CONFIG_SCSI_SATA_SIS is not set +# CONFIG_SCSI_SATA_ULI is not set +# CONFIG_SCSI_SATA_VIA is not set +# CONFIG_SCSI_SATA_VITESSE is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +CONFIG_SCSI_IBMVSCSI=y +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 +CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 +CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 +# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set +CONFIG_SCSI_IPR=y +CONFIG_SCSI_IPR_TRACE=y +CONFIG_SCSI_IPR_DUMP=y +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +CONFIG_SCSI_QLA21XX=m +CONFIG_SCSI_QLA22XX=m +CONFIG_SCSI_QLA2300=m +CONFIG_SCSI_QLA2322=m +CONFIG_SCSI_QLA6312=m +CONFIG_SCSI_QLA24XX=m +CONFIG_SCSI_LPFC=m +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +CONFIG_SCSI_DEBUG=m + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +CONFIG_MD_RAID10=y +CONFIG_MD_RAID5=y +CONFIG_MD_RAID6=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=y +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +CONFIG_IEEE1394=y + +# +# Subsystem Options +# +# CONFIG_IEEE1394_VERBOSEDEBUG is not set +# CONFIG_IEEE1394_OUI_DB is not set +CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y +CONFIG_IEEE1394_CONFIG_ROM_IP1394=y +# CONFIG_IEEE1394_EXPORT_FULL_API is not set + +# +# Device Drivers +# +# CONFIG_IEEE1394_PCILYNX is not set +CONFIG_IEEE1394_OHCI1394=y + +# +# Protocol Drivers +# +CONFIG_IEEE1394_VIDEO1394=m +CONFIG_IEEE1394_SBP2=m +# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set +CONFIG_IEEE1394_ETH1394=m +CONFIG_IEEE1394_DV1394=m +CONFIG_IEEE1394_RAWIO=y +CONFIG_IEEE1394_CMP=m +CONFIG_IEEE1394_AMDTP=m + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +CONFIG_ADB_PMU=y +CONFIG_PMAC_SMU=y +CONFIG_THERM_PM72=y +CONFIG_WINDFARM=y +CONFIG_WINDFARM_PM81=y +CONFIG_WINDFARM_PM91=y + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +CONFIG_BONDING=m +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +CONFIG_SUNGEM=y +# CONFIG_CASSINI is not set +CONFIG_NET_VENDOR_3COM=y +CONFIG_VORTEX=y +# CONFIG_TYPHOON is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_IBMVETH=m +CONFIG_NET_PCI=y +CONFIG_PCNET32=y +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +CONFIG_ACENIC=y +CONFIG_ACENIC_OMIT_TIGON_I=y +# CONFIG_DL2K is not set +CONFIG_E1000=y +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_TIGON3=y +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +CONFIG_IXGB=m +# CONFIG_IXGB_NAPI is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +CONFIG_TR=y +CONFIG_IBMOL=y +# CONFIG_3C359 is not set +# CONFIG_TMS380TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +CONFIG_PPPOE=m +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +CONFIG_NETCONSOLE=y +CONFIG_NETPOLL=y +CONFIG_NETPOLL_RX=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_PCSPKR=m +# CONFIG_INPUT_UINPUT is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_PMACZILOG is not set +CONFIG_SERIAL_ICOM=m +CONFIG_SERIAL_JSM=m +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +CONFIG_HVC_CONSOLE=y +CONFIG_HVCS=m + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +CONFIG_I2C_AMD8111=y +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_KEYWEST=y +CONFIG_I2C_PMAC_SMU=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_MACMODES=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +CONFIG_FB_OF=y +# CONFIG_FB_CONTROL is not set +# CONFIG_FB_PLATINUM is not set +# CONFIG_FB_VALKYRIE is not set +# CONFIG_FB_CT65550 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +CONFIG_FB_MATROX=y +CONFIG_FB_MATROX_MILLENIUM=y +CONFIG_FB_MATROX_MYSTIQUE=y +CONFIG_FB_MATROX_G=y +CONFIG_FB_MATROX_I2C=m +CONFIG_FB_MATROX_MAVEN=m +CONFIG_FB_MATROX_MULTIHEAD=y +# CONFIG_FB_RADEON_OLD is not set +CONFIG_FB_RADEON=y +CONFIG_FB_RADEON_I2C=y +# CONFIG_FB_RADEON_DEBUG is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_CYBLA is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y + +# +# Logo configuration +# +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_DEVICE=y + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_GENERIC_DRIVER=y + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set + +# +# ALSA PowerMac devices +# +CONFIG_SND_POWERMAC=m +CONFIG_SND_POWERMAC_AUTO_DRC=y + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_USX2Y is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +CONFIG_USB_HIDDEV=y +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +CONFIG_INFINIBAND=m +# CONFIG_INFINIBAND_USER_MAD is not set +# CONFIG_INFINIBAND_USER_ACCESS is not set +CONFIG_INFINIBAND_MTHCA=m +# CONFIG_INFINIBAND_MTHCA_DEBUG is not set +CONFIG_INFINIBAND_IPOIB=m +# CONFIG_INFINIBAND_IPOIB_DEBUG is not set +# CONFIG_INFINIBAND_SRP is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y +CONFIG_FS_XIP=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +CONFIG_JFS_FS=y +CONFIG_JFS_POSIX_ACL=y +CONFIG_JFS_SECURITY=y +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +CONFIG_XFS_EXPORT=y +# CONFIG_XFS_QUOTA is not set +CONFIG_XFS_SECURITY=y +CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +# CONFIG_JOLIET is not set +# CONFIG_ZISOFS is not set +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +CONFIG_RPCSEC_GSS_SPKM3=m +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m + +# +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m + +# +# Instrumentation Support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=y +# CONFIG_KPROBES is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_DEBUG_STACKOVERFLOW=y +CONFIG_DEBUG_STACK_USAGE=y +CONFIG_DEBUGGER=y +CONFIG_XMON=y +# CONFIG_XMON_DEFAULT is not set +CONFIG_IRQSTACKS=y +CONFIG_BOOTX_TEXT=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index b4745c918a4a..b589b196eb3f 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -165,7 +165,6 @@ CONFIG_SPARSEMEM_EXTREME=y # CONFIG_MEMORY_HOTPLUG is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y -CONFIG_NODES_SPAN_OTHER_NODES=y # CONFIG_PPC_64K_PAGES is not set CONFIG_SCHED_SMT=y CONFIG_PROC_DEVICETREE=y diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 4970e3721a84..9ed551b6c172 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -12,12 +12,12 @@ CFLAGS_btext.o += -fPIC endif obj-y := semaphore.o cputable.o ptrace.o syscalls.o \ - irq.o signal_32.o pmc.o vdso.o + irq.o align.o signal_32.o pmc.o vdso.o obj-y += vdso32/ obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \ signal_64.o ptrace32.o systbl.o \ paca.o ioctl32.o cpu_setup_power4.o \ - firmware.o sysfs.o udbg.o + firmware.o sysfs.o udbg.o idle_64.o obj-$(CONFIG_PPC64) += vdso64/ obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o obj-$(CONFIG_POWER4) += idle_power4.o @@ -35,6 +35,7 @@ obj-$(CONFIG_PPC_PSERIES) += udbg_16550.o obj-$(CONFIG_PPC_MAPLE) += udbg_16550.o udbgscc-$(CONFIG_PPC64) := udbg_scc.o obj-$(CONFIG_PPC_PMAC) += $(udbgscc-y) +obj64-$(CONFIG_PPC_MULTIPLATFORM) += nvram_64.o ifeq ($(CONFIG_PPC_MERGE),y) @@ -78,5 +79,7 @@ smpobj-$(CONFIG_SMP) += smp.o endif +obj-$(CONFIG_PPC64) += $(obj64-y) + extra-$(CONFIG_PPC_FPU) += fpu.o extra-$(CONFIG_PPC64) += entry_64.o diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c new file mode 100644 index 000000000000..faaec9c6f78f --- /dev/null +++ b/arch/powerpc/kernel/align.c @@ -0,0 +1,530 @@ +/* align.c - handle alignment exceptions for the Power PC. + * + * Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au> + * Copyright (c) 1998-1999 TiVo, Inc. + * PowerPC 403GCX modifications. + * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu> + * PowerPC 403GCX/405GP modifications. + * Copyright (c) 2001-2002 PPC64 team, IBM Corp + * 64-bit and Power4 support + * Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp + * <benh@kernel.crashing.org> + * Merge ppc32 and ppc64 implementations + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/mm.h> +#include <asm/processor.h> +#include <asm/uaccess.h> +#include <asm/system.h> +#include <asm/cache.h> +#include <asm/cputable.h> + +struct aligninfo { + unsigned char len; + unsigned char flags; +}; + +#define IS_XFORM(inst) (((inst) >> 26) == 31) +#define IS_DSFORM(inst) (((inst) >> 26) >= 56) + +#define INVALID { 0, 0 } + +#define LD 1 /* load */ +#define ST 2 /* store */ +#define SE 4 /* sign-extend value */ +#define F 8 /* to/from fp regs */ +#define U 0x10 /* update index register */ +#define M 0x20 /* multiple load/store */ +#define SW 0x40 /* byte swap int or ... */ +#define S 0x40 /* ... single-precision fp */ +#define SX 0x40 /* byte count in XER */ +#define HARD 0x80 /* string, stwcx. */ + +#define DCBZ 0x5f /* 8xx/82xx dcbz faults when cache not enabled */ + +#define SWAP(a, b) (t = (a), (a) = (b), (b) = t) + +/* + * The PowerPC stores certain bits of the instruction that caused the + * alignment exception in the DSISR register. This array maps those + * bits to information about the operand length and what the + * instruction would do. + */ +static struct aligninfo aligninfo[128] = { + { 4, LD }, /* 00 0 0000: lwz / lwarx */ + INVALID, /* 00 0 0001 */ + { 4, ST }, /* 00 0 0010: stw */ + INVALID, /* 00 0 0011 */ + { 2, LD }, /* 00 0 0100: lhz */ + { 2, LD+SE }, /* 00 0 0101: lha */ + { 2, ST }, /* 00 0 0110: sth */ + { 4, LD+M }, /* 00 0 0111: lmw */ + { 4, LD+F+S }, /* 00 0 1000: lfs */ + { 8, LD+F }, /* 00 0 1001: lfd */ + { 4, ST+F+S }, /* 00 0 1010: stfs */ + { 8, ST+F }, /* 00 0 1011: stfd */ + INVALID, /* 00 0 1100 */ + { 8, LD }, /* 00 0 1101: ld/ldu/lwa */ + INVALID, /* 00 0 1110 */ + { 8, ST }, /* 00 0 1111: std/stdu */ + { 4, LD+U }, /* 00 1 0000: lwzu */ + INVALID, /* 00 1 0001 */ + { 4, ST+U }, /* 00 1 0010: stwu */ + INVALID, /* 00 1 0011 */ + { 2, LD+U }, /* 00 1 0100: lhzu */ + { 2, LD+SE+U }, /* 00 1 0101: lhau */ + { 2, ST+U }, /* 00 1 0110: sthu */ + { 4, ST+M }, /* 00 1 0111: stmw */ + { 4, LD+F+S+U }, /* 00 1 1000: lfsu */ + { 8, LD+F+U }, /* 00 1 1001: lfdu */ + { 4, ST+F+S+U }, /* 00 1 1010: stfsu */ + { 8, ST+F+U }, /* 00 1 1011: stfdu */ + INVALID, /* 00 1 1100 */ + INVALID, /* 00 1 1101 */ + INVALID, /* 00 1 1110 */ + INVALID, /* 00 1 1111 */ + { 8, LD }, /* 01 0 0000: ldx */ + INVALID, /* 01 0 0001 */ + { 8, ST }, /* 01 0 0010: stdx */ + INVALID, /* 01 0 0011 */ + INVALID, /* 01 0 0100 */ + { 4, LD+SE }, /* 01 0 0101: lwax */ + INVALID, /* 01 0 0110 */ + INVALID, /* 01 0 0111 */ + { 4, LD+M+HARD+SX }, /* 01 0 1000: lswx */ + { 4, LD+M+HARD }, /* 01 0 1001: lswi */ + { 4, ST+M+HARD+SX }, /* 01 0 1010: stswx */ + { 4, ST+M+HARD }, /* 01 0 1011: stswi */ + INVALID, /* 01 0 1100 */ + { 8, LD+U }, /* 01 0 1101: ldu */ + INVALID, /* 01 0 1110 */ + { 8, ST+U }, /* 01 0 1111: stdu */ + { 8, LD+U }, /* 01 1 0000: ldux */ + INVALID, /* 01 1 0001 */ + { 8, ST+U }, /* 01 1 0010: stdux */ + INVALID, /* 01 1 0011 */ + INVALID, /* 01 1 0100 */ + { 4, LD+SE+U }, /* 01 1 0101: lwaux */ + INVALID, /* 01 1 0110 */ + INVALID, /* 01 1 0111 */ + INVALID, /* 01 1 1000 */ + INVALID, /* 01 1 1001 */ + INVALID, /* 01 1 1010 */ + INVALID, /* 01 1 1011 */ + INVALID, /* 01 1 1100 */ + INVALID, /* 01 1 1101 */ + INVALID, /* 01 1 1110 */ + INVALID, /* 01 1 1111 */ + INVALID, /* 10 0 0000 */ + INVALID, /* 10 0 0001 */ + INVALID, /* 10 0 0010: stwcx. */ + INVALID, /* 10 0 0011 */ + INVALID, /* 10 0 0100 */ + INVALID, /* 10 0 0101 */ + INVALID, /* 10 0 0110 */ + INVALID, /* 10 0 0111 */ + { 4, LD+SW }, /* 10 0 1000: lwbrx */ + INVALID, /* 10 0 1001 */ + { 4, ST+SW }, /* 10 0 1010: stwbrx */ + INVALID, /* 10 0 1011 */ + { 2, LD+SW }, /* 10 0 1100: lhbrx */ + { 4, LD+SE }, /* 10 0 1101 lwa */ + { 2, ST+SW }, /* 10 0 1110: sthbrx */ + INVALID, /* 10 0 1111 */ + INVALID, /* 10 1 0000 */ + INVALID, /* 10 1 0001 */ + INVALID, /* 10 1 0010 */ + INVALID, /* 10 1 0011 */ + INVALID, /* 10 1 0100 */ + INVALID, /* 10 1 0101 */ + INVALID, /* 10 1 0110 */ + INVALID, /* 10 1 0111 */ + INVALID, /* 10 1 1000 */ + INVALID, /* 10 1 1001 */ + INVALID, /* 10 1 1010 */ + INVALID, /* 10 1 1011 */ + INVALID, /* 10 1 1100 */ + INVALID, /* 10 1 1101 */ + INVALID, /* 10 1 1110 */ + { 0, ST+HARD }, /* 10 1 1111: dcbz */ + { 4, LD }, /* 11 0 0000: lwzx */ + INVALID, /* 11 0 0001 */ + { 4, ST }, /* 11 0 0010: stwx */ + INVALID, /* 11 0 0011 */ + { 2, LD }, /* 11 0 0100: lhzx */ + { 2, LD+SE }, /* 11 0 0101: lhax */ + { 2, ST }, /* 11 0 0110: sthx */ + INVALID, /* 11 0 0111 */ + { 4, LD+F+S }, /* 11 0 1000: lfsx */ + { 8, LD+F }, /* 11 0 1001: lfdx */ + { 4, ST+F+S }, /* 11 0 1010: stfsx */ + { 8, ST+F }, /* 11 0 1011: stfdx */ + INVALID, /* 11 0 1100 */ + { 8, LD+M }, /* 11 0 1101: lmd */ + INVALID, /* 11 0 1110 */ + { 8, ST+M }, /* 11 0 1111: stmd */ + { 4, LD+U }, /* 11 1 0000: lwzux */ + INVALID, /* 11 1 0001 */ + { 4, ST+U }, /* 11 1 0010: stwux */ + INVALID, /* 11 1 0011 */ + { 2, LD+U }, /* 11 1 0100: lhzux */ + { 2, LD+SE+U }, /* 11 1 0101: lhaux */ + { 2, ST+U }, /* 11 1 0110: sthux */ + INVALID, /* 11 1 0111 */ + { 4, LD+F+S+U }, /* 11 1 1000: lfsux */ + { 8, LD+F+U }, /* 11 1 1001: lfdux */ + { 4, ST+F+S+U }, /* 11 1 1010: stfsux */ + { 8, ST+F+U }, /* 11 1 1011: stfdux */ + INVALID, /* 11 1 1100 */ + INVALID, /* 11 1 1101 */ + INVALID, /* 11 1 1110 */ + INVALID, /* 11 1 1111 */ +}; + +/* + * Create a DSISR value from the instruction + */ +static inline unsigned make_dsisr(unsigned instr) +{ + unsigned dsisr; + + + /* bits 6:15 --> 22:31 */ + dsisr = (instr & 0x03ff0000) >> 16; + + if (IS_XFORM(instr)) { + /* bits 29:30 --> 15:16 */ + dsisr |= (instr & 0x00000006) << 14; + /* bit 25 --> 17 */ + dsisr |= (instr & 0x00000040) << 8; + /* bits 21:24 --> 18:21 */ + dsisr |= (instr & 0x00000780) << 3; + } else { + /* bit 5 --> 17 */ + dsisr |= (instr & 0x04000000) >> 12; + /* bits 1: 4 --> 18:21 */ + dsisr |= (instr & 0x78000000) >> 17; + /* bits 30:31 --> 12:13 */ + if (IS_DSFORM(instr)) + dsisr |= (instr & 0x00000003) << 18; + } + + return dsisr; +} + +/* + * The dcbz (data cache block zero) instruction + * gives an alignment fault if used on non-cacheable + * memory. We handle the fault mainly for the + * case when we are running with the cache disabled + * for debugging. + */ +static int emulate_dcbz(struct pt_regs *regs, unsigned char __user *addr) +{ + long __user *p; + int i, size; + +#ifdef __powerpc64__ + size = ppc64_caches.dline_size; +#else + size = L1_CACHE_BYTES; +#endif + p = (long __user *) (regs->dar & -size); + if (user_mode(regs) && !access_ok(VERIFY_WRITE, p, size)) + return -EFAULT; + for (i = 0; i < size / sizeof(long); ++i) + if (__put_user(0, p+i)) + return -EFAULT; + return 1; +} + +/* + * Emulate load & store multiple instructions + * On 64-bit machines, these instructions only affect/use the + * bottom 4 bytes of each register, and the loads clear the + * top 4 bytes of the affected register. + */ +#ifdef CONFIG_PPC64 +#define REG_BYTE(rp, i) *((u8 *)((rp) + ((i) >> 2)) + ((i) & 3) + 4) +#else +#define REG_BYTE(rp, i) *((u8 *)(rp) + (i)) +#endif + +static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr, + unsigned int reg, unsigned int nb, + unsigned int flags, unsigned int instr) +{ + unsigned long *rptr; + unsigned int nb0, i; + + /* + * We do not try to emulate 8 bytes multiple as they aren't really + * available in our operating environments and we don't try to + * emulate multiples operations in kernel land as they should never + * be used/generated there at least not on unaligned boundaries + */ + if (unlikely((nb > 4) || !user_mode(regs))) + return 0; + + /* lmw, stmw, lswi/x, stswi/x */ + nb0 = 0; + if (flags & HARD) { + if (flags & SX) { + nb = regs->xer & 127; + if (nb == 0) + return 1; + } else { + if (__get_user(instr, + (unsigned int __user *)regs->nip)) + return -EFAULT; + nb = (instr >> 11) & 0x1f; + if (nb == 0) + nb = 32; + } + if (nb + reg * 4 > 128) { + nb0 = nb + reg * 4 - 128; + nb = 128 - reg * 4; + } + } else { + /* lwm, stmw */ + nb = (32 - reg) * 4; + } + + if (!access_ok((flags & ST ? VERIFY_WRITE: VERIFY_READ), addr, nb+nb0)) + return -EFAULT; /* bad address */ + + rptr = ®s->gpr[reg]; + if (flags & LD) { + /* + * This zeroes the top 4 bytes of the affected registers + * in 64-bit mode, and also zeroes out any remaining + * bytes of the last register for lsw*. + */ + memset(rptr, 0, ((nb + 3) / 4) * sizeof(unsigned long)); + if (nb0 > 0) + memset(®s->gpr[0], 0, + ((nb0 + 3) / 4) * sizeof(unsigned long)); + + for (i = 0; i < nb; ++i) + if (__get_user(REG_BYTE(rptr, i), addr + i)) + return -EFAULT; + if (nb0 > 0) { + rptr = ®s->gpr[0]; + addr += nb; + for (i = 0; i < nb0; ++i) + if (__get_user(REG_BYTE(rptr, i), addr + i)) + return -EFAULT; + } + + } else { + for (i = 0; i < nb; ++i) + if (__put_user(REG_BYTE(rptr, i), addr + i)) + return -EFAULT; + if (nb0 > 0) { + rptr = ®s->gpr[0]; + addr += nb; + for (i = 0; i < nb0; ++i) + if (__put_user(REG_BYTE(rptr, i), addr + i)) + return -EFAULT; + } + } + return 1; +} + + +/* + * Called on alignment exception. Attempts to fixup + * + * Return 1 on success + * Return 0 if unable to handle the interrupt + * Return -EFAULT if data address is bad + */ + +int fix_alignment(struct pt_regs *regs) +{ + unsigned int instr, nb, flags; + unsigned int reg, areg; + unsigned int dsisr; + unsigned char __user *addr; + unsigned char __user *p; + int ret, t; + union { + u64 ll; + double dd; + unsigned char v[8]; + struct { + unsigned hi32; + int low32; + } x32; + struct { + unsigned char hi48[6]; + short low16; + } x16; + } data; + + /* + * We require a complete register set, if not, then our assembly + * is broken + */ + CHECK_FULL_REGS(regs); + + dsisr = regs->dsisr; + + /* Some processors don't provide us with a DSISR we can use here, + * let's make one up from the instruction + */ + if (cpu_has_feature(CPU_FTR_NODSISRALIGN)) { + unsigned int real_instr; + if (unlikely(__get_user(real_instr, + (unsigned int __user *)regs->nip))) + return -EFAULT; + dsisr = make_dsisr(real_instr); + } + + /* extract the operation and registers from the dsisr */ + reg = (dsisr >> 5) & 0x1f; /* source/dest register */ + areg = dsisr & 0x1f; /* register to update */ + instr = (dsisr >> 10) & 0x7f; + instr |= (dsisr >> 13) & 0x60; + + /* Lookup the operation in our table */ + nb = aligninfo[instr].len; + flags = aligninfo[instr].flags; + + /* DAR has the operand effective address */ + addr = (unsigned char __user *)regs->dar; + + /* A size of 0 indicates an instruction we don't support, with + * the exception of DCBZ which is handled as a special case here + */ + if (instr == DCBZ) + return emulate_dcbz(regs, addr); + if (unlikely(nb == 0)) + return 0; + + /* Load/Store Multiple instructions are handled in their own + * function + */ + if (flags & M) + return emulate_multiple(regs, addr, reg, nb, flags, instr); + + /* Verify the address of the operand */ + if (unlikely(user_mode(regs) && + !access_ok((flags & ST ? VERIFY_WRITE : VERIFY_READ), + addr, nb))) + return -EFAULT; + + /* Force the fprs into the save area so we can reference them */ + if (flags & F) { + /* userland only */ + if (unlikely(!user_mode(regs))) + return 0; + flush_fp_to_thread(current); + } + + /* If we are loading, get the data from user space, else + * get it from register values + */ + if (flags & LD) { + data.ll = 0; + ret = 0; + p = addr; + switch (nb) { + case 8: + ret |= __get_user(data.v[0], p++); + ret |= __get_user(data.v[1], p++); + ret |= __get_user(data.v[2], p++); + ret |= __get_user(data.v[3], p++); + case 4: + ret |= __get_user(data.v[4], p++); + ret |= __get_user(data.v[5], p++); + case 2: + ret |= __get_user(data.v[6], p++); + ret |= __get_user(data.v[7], p++); + if (unlikely(ret)) + return -EFAULT; + } + } else if (flags & F) + data.dd = current->thread.fpr[reg]; + else + data.ll = regs->gpr[reg]; + + /* Perform other misc operations like sign extension, byteswap, + * or floating point single precision conversion + */ + switch (flags & ~U) { + case LD+SE: /* sign extend */ + if ( nb == 2 ) + data.ll = data.x16.low16; + else /* nb must be 4 */ + data.ll = data.x32.low32; + break; + case LD+S: /* byte-swap */ + case ST+S: + if (nb == 2) { + SWAP(data.v[6], data.v[7]); + } else { + SWAP(data.v[4], data.v[7]); + SWAP(data.v[5], data.v[6]); + } + break; + + /* Single-precision FP load and store require conversions... */ + case LD+F+S: +#ifdef CONFIG_PPC_FPU + preempt_disable(); + enable_kernel_fp(); + cvt_fd((float *)&data.v[4], &data.dd, ¤t->thread); + preempt_enable(); +#else + return 0; +#endif + break; + case ST+F+S: +#ifdef CONFIG_PPC_FPU + preempt_disable(); + enable_kernel_fp(); + cvt_df(&data.dd, (float *)&data.v[4], ¤t->thread); + preempt_enable(); +#else + return 0; +#endif + break; + } + + /* Store result to memory or update registers */ + if (flags & ST) { + ret = 0; + p = addr; + switch (nb) { + case 8: + ret |= __put_user(data.v[0], p++); + ret |= __put_user(data.v[1], p++); + ret |= __put_user(data.v[2], p++); + ret |= __put_user(data.v[3], p++); + case 4: + ret |= __put_user(data.v[4], p++); + ret |= __put_user(data.v[5], p++); + case 2: + ret |= __put_user(data.v[6], p++); + ret |= __put_user(data.v[7], p++); + } + if (unlikely(ret)) + return -EFAULT; + } else if (flags & F) + current->thread.fpr[reg] = data.dd; + else + regs->gpr[reg] = data.ll; + + /* Update RA as needed */ + if (flags & U) + regs->gpr[areg] = regs->dar; + + return 1; +} diff --git a/arch/powerpc/kernel/idle_64.c b/arch/powerpc/kernel/idle_64.c new file mode 100644 index 000000000000..b879d3057ef8 --- /dev/null +++ b/arch/powerpc/kernel/idle_64.c @@ -0,0 +1,121 @@ +/* + * Idle daemon for PowerPC. Idle daemon will handle any action + * that needs to be taken when the system becomes idle. + * + * Originally Written by Cort Dougan (cort@cs.nmt.edu) + * + * iSeries supported added by Mike Corrigan <mikejc@us.ibm.com> + * + * Additional shared processor, SMT, and firmware support + * Copyright (c) 2003 Dave Engebretsen <engebret@us.ibm.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/config.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/smp.h> +#include <linux/cpu.h> +#include <linux/sysctl.h> + +#include <asm/system.h> +#include <asm/processor.h> +#include <asm/cputable.h> +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/smp.h> + +extern void power4_idle(void); + +void default_idle(void) +{ + unsigned int cpu = smp_processor_id(); + set_thread_flag(TIF_POLLING_NRFLAG); + + while (1) { + if (!need_resched()) { + while (!need_resched() && !cpu_is_offline(cpu)) { + ppc64_runlatch_off(); + + /* + * Go into low thread priority and possibly + * low power mode. + */ + HMT_low(); + HMT_very_low(); + } + + HMT_medium(); + } + + ppc64_runlatch_on(); + preempt_enable_no_resched(); + schedule(); + preempt_disable(); + if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) + cpu_die(); + } +} + +void native_idle(void) +{ + while (1) { + ppc64_runlatch_off(); + + if (!need_resched()) + power4_idle(); + + if (need_resched()) { + ppc64_runlatch_on(); + preempt_enable_no_resched(); + schedule(); + preempt_disable(); + } + + if (cpu_is_offline(smp_processor_id()) && + system_state == SYSTEM_RUNNING) + cpu_die(); + } +} + +void cpu_idle(void) +{ + BUG_ON(NULL == ppc_md.idle_loop); + ppc_md.idle_loop(); +} + +int powersave_nap; + +#ifdef CONFIG_SYSCTL +/* + * Register the sysctl to set/clear powersave_nap. + */ +static ctl_table powersave_nap_ctl_table[]={ + { + .ctl_name = KERN_PPC_POWERSAVE_NAP, + .procname = "powersave-nap", + .data = &powersave_nap, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec, + }, + { 0, }, +}; +static ctl_table powersave_nap_sysctl_root[] = { + { 1, "kernel", NULL, 0, 0755, powersave_nap_ctl_table, }, + { 0,}, +}; + +static int __init +register_powersave_nap_sysctl(void) +{ + register_sysctl_table(powersave_nap_sysctl_root, 0); + + return 0; +} +__initcall(register_powersave_nap_sysctl); +#endif diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index f6d84a75ed26..624a983a9676 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -27,14 +27,6 @@ .text - .align 5 -_GLOBAL(__delay) - cmpwi 0,r3,0 - mtctr r3 - beqlr -1: bdnz 1b - blr - /* * This returns the high 64 bits of the product of two 64-bit numbers. */ diff --git a/arch/powerpc/kernel/nvram_64.c b/arch/powerpc/kernel/nvram_64.c new file mode 100644 index 000000000000..c0fcd29918ce --- /dev/null +++ b/arch/powerpc/kernel/nvram_64.c @@ -0,0 +1,742 @@ +/* + * c 2001 PPC 64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * /dev/nvram driver for PPC64 + * + * This perhaps should live in drivers/char + * + * TODO: Split the /dev/nvram part (that one can use + * drivers/char/generic_nvram.c) from the arch & partition + * parsing code. + */ + +#include <linux/module.h> + +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/miscdevice.h> +#include <linux/fcntl.h> +#include <linux/nvram.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <asm/uaccess.h> +#include <asm/nvram.h> +#include <asm/rtas.h> +#include <asm/prom.h> +#include <asm/machdep.h> + +#undef DEBUG_NVRAM + +static int nvram_scan_partitions(void); +static int nvram_setup_partition(void); +static int nvram_create_os_partition(void); +static int nvram_remove_os_partition(void); + +static struct nvram_partition * nvram_part; +static long nvram_error_log_index = -1; +static long nvram_error_log_size = 0; + +int no_logging = 1; /* Until we initialize everything, + * make sure we don't try logging + * anything */ + +extern volatile int error_log_cnt; + +struct err_log_info { + int error_type; + unsigned int seq_num; +}; + +static loff_t dev_nvram_llseek(struct file *file, loff_t offset, int origin) +{ + int size; + + if (ppc_md.nvram_size == NULL) + return -ENODEV; + size = ppc_md.nvram_size(); + + switch (origin) { + case 1: + offset += file->f_pos; + break; + case 2: + offset += size; + break; + } + if (offset < 0) + return -EINVAL; + file->f_pos = offset; + return file->f_pos; +} + + +static ssize_t dev_nvram_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + ssize_t len; + char *tmp_buffer; + int size; + + if (ppc_md.nvram_size == NULL) + return -ENODEV; + size = ppc_md.nvram_size(); + + if (!access_ok(VERIFY_WRITE, buf, count)) + return -EFAULT; + if (*ppos >= size) + return 0; + if (count > size) + count = size; + + tmp_buffer = (char *) kmalloc(count, GFP_KERNEL); + if (!tmp_buffer) { + printk(KERN_ERR "dev_read_nvram: kmalloc failed\n"); + return -ENOMEM; + } + + len = ppc_md.nvram_read(tmp_buffer, count, ppos); + if ((long)len <= 0) { + kfree(tmp_buffer); + return len; + } + + if (copy_to_user(buf, tmp_buffer, len)) { + kfree(tmp_buffer); + return -EFAULT; + } + + kfree(tmp_buffer); + return len; + +} + +static ssize_t dev_nvram_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + ssize_t len; + char * tmp_buffer; + int size; + + if (ppc_md.nvram_size == NULL) + return -ENODEV; + size = ppc_md.nvram_size(); + + if (!access_ok(VERIFY_READ, buf, count)) + return -EFAULT; + if (*ppos >= size) + return 0; + if (count > size) + count = size; + + tmp_buffer = (char *) kmalloc(count, GFP_KERNEL); + if (!tmp_buffer) { + printk(KERN_ERR "dev_nvram_write: kmalloc failed\n"); + return -ENOMEM; + } + + if (copy_from_user(tmp_buffer, buf, count)) { + kfree(tmp_buffer); + return -EFAULT; + } + + len = ppc_md.nvram_write(tmp_buffer, count, ppos); + if ((long)len <= 0) { + kfree(tmp_buffer); + return len; + } + + kfree(tmp_buffer); + return len; +} + +static int dev_nvram_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + switch(cmd) { +#ifdef CONFIG_PPC_PMAC + case OBSOLETE_PMAC_NVRAM_GET_OFFSET: + printk(KERN_WARNING "nvram: Using obsolete PMAC_NVRAM_GET_OFFSET ioctl\n"); + case IOC_NVRAM_GET_OFFSET: { + int part, offset; + + if (_machine != PLATFORM_POWERMAC) + return -EINVAL; + if (copy_from_user(&part, (void __user*)arg, sizeof(part)) != 0) + return -EFAULT; + if (part < pmac_nvram_OF || part > pmac_nvram_NR) + return -EINVAL; + offset = pmac_get_partition(part); + if (offset < 0) + return offset; + if (copy_to_user((void __user*)arg, &offset, sizeof(offset)) != 0) + return -EFAULT; + return 0; + } +#endif /* CONFIG_PPC_PMAC */ + } + return -EINVAL; +} + +struct file_operations nvram_fops = { + .owner = THIS_MODULE, + .llseek = dev_nvram_llseek, + .read = dev_nvram_read, + .write = dev_nvram_write, + .ioctl = dev_nvram_ioctl, +}; + +static struct miscdevice nvram_dev = { + NVRAM_MINOR, + "nvram", + &nvram_fops +}; + + +#ifdef DEBUG_NVRAM +static void nvram_print_partitions(char * label) +{ + struct list_head * p; + struct nvram_partition * tmp_part; + + printk(KERN_WARNING "--------%s---------\n", label); + printk(KERN_WARNING "indx\t\tsig\tchks\tlen\tname\n"); + list_for_each(p, &nvram_part->partition) { + tmp_part = list_entry(p, struct nvram_partition, partition); + printk(KERN_WARNING "%d \t%02x\t%02x\t%d\t%s\n", + tmp_part->index, tmp_part->header.signature, + tmp_part->header.checksum, tmp_part->header.length, + tmp_part->header.name); + } +} +#endif + + +static int nvram_write_header(struct nvram_partition * part) +{ + loff_t tmp_index; + int rc; + + tmp_index = part->index; + rc = ppc_md.nvram_write((char *)&part->header, NVRAM_HEADER_LEN, &tmp_index); + + return rc; +} + + +static unsigned char nvram_checksum(struct nvram_header *p) +{ + unsigned int c_sum, c_sum2; + unsigned short *sp = (unsigned short *)p->name; /* assume 6 shorts */ + c_sum = p->signature + p->length + sp[0] + sp[1] + sp[2] + sp[3] + sp[4] + sp[5]; + + /* The sum may have spilled into the 3rd byte. Fold it back. */ + c_sum = ((c_sum & 0xffff) + (c_sum >> 16)) & 0xffff; + /* The sum cannot exceed 2 bytes. Fold it into a checksum */ + c_sum2 = (c_sum >> 8) + (c_sum << 8); + c_sum = ((c_sum + c_sum2) >> 8) & 0xff; + return c_sum; +} + + +/* + * Find an nvram partition, sig can be 0 for any + * partition or name can be NULL for any name, else + * tries to match both + */ +struct nvram_partition *nvram_find_partition(int sig, const char *name) +{ + struct nvram_partition * part; + struct list_head * p; + + list_for_each(p, &nvram_part->partition) { + part = list_entry(p, struct nvram_partition, partition); + + if (sig && part->header.signature != sig) + continue; + if (name && 0 != strncmp(name, part->header.name, 12)) + continue; + return part; + } + return NULL; +} +EXPORT_SYMBOL(nvram_find_partition); + + +static int nvram_remove_os_partition(void) +{ + struct list_head *i; + struct list_head *j; + struct nvram_partition * part; + struct nvram_partition * cur_part; + int rc; + + list_for_each(i, &nvram_part->partition) { + part = list_entry(i, struct nvram_partition, partition); + if (part->header.signature != NVRAM_SIG_OS) + continue; + + /* Make os partition a free partition */ + part->header.signature = NVRAM_SIG_FREE; + sprintf(part->header.name, "wwwwwwwwwwww"); + part->header.checksum = nvram_checksum(&part->header); + + /* Merge contiguous free partitions backwards */ + list_for_each_prev(j, &part->partition) { + cur_part = list_entry(j, struct nvram_partition, partition); + if (cur_part == nvram_part || cur_part->header.signature != NVRAM_SIG_FREE) { + break; + } + + part->header.length += cur_part->header.length; + part->header.checksum = nvram_checksum(&part->header); + part->index = cur_part->index; + + list_del(&cur_part->partition); + kfree(cur_part); + j = &part->partition; /* fixup our loop */ + } + + /* Merge contiguous free partitions forwards */ + list_for_each(j, &part->partition) { + cur_part = list_entry(j, struct nvram_partition, partition); + if (cur_part == nvram_part || cur_part->header.signature != NVRAM_SIG_FREE) { + break; + } + + part->header.length += cur_part->header.length; + part->header.checksum = nvram_checksum(&part->header); + + list_del(&cur_part->partition); + kfree(cur_part); + j = &part->partition; /* fixup our loop */ + } + + rc = nvram_write_header(part); + if (rc <= 0) { + printk(KERN_ERR "nvram_remove_os_partition: nvram_write failed (%d)\n", rc); + return rc; + } + + } + + return 0; +} + +/* nvram_create_os_partition + * + * Create a OS linux partition to buffer error logs. + * Will create a partition starting at the first free + * space found if space has enough room. + */ +static int nvram_create_os_partition(void) +{ + struct nvram_partition *part; + struct nvram_partition *new_part; + struct nvram_partition *free_part = NULL; + int seq_init[2] = { 0, 0 }; + loff_t tmp_index; + long size = 0; + int rc; + + /* Find a free partition that will give us the maximum needed size + If can't find one that will give us the minimum size needed */ + list_for_each_entry(part, &nvram_part->partition, partition) { + if (part->header.signature != NVRAM_SIG_FREE) + continue; + + if (part->header.length >= NVRAM_MAX_REQ) { + size = NVRAM_MAX_REQ; + free_part = part; + break; + } + if (!size && part->header.length >= NVRAM_MIN_REQ) { + size = NVRAM_MIN_REQ; + free_part = part; + } + } + if (!size) + return -ENOSPC; + + /* Create our OS partition */ + new_part = kmalloc(sizeof(*new_part), GFP_KERNEL); + if (!new_part) { + printk(KERN_ERR "nvram_create_os_partition: kmalloc failed\n"); + return -ENOMEM; + } + + new_part->index = free_part->index; + new_part->header.signature = NVRAM_SIG_OS; + new_part->header.length = size; + strcpy(new_part->header.name, "ppc64,linux"); + new_part->header.checksum = nvram_checksum(&new_part->header); + + rc = nvram_write_header(new_part); + if (rc <= 0) { + printk(KERN_ERR "nvram_create_os_partition: nvram_write_header \ + failed (%d)\n", rc); + return rc; + } + + /* make sure and initialize to zero the sequence number and the error + type logged */ + tmp_index = new_part->index + NVRAM_HEADER_LEN; + rc = ppc_md.nvram_write((char *)&seq_init, sizeof(seq_init), &tmp_index); + if (rc <= 0) { + printk(KERN_ERR "nvram_create_os_partition: nvram_write " + "failed (%d)\n", rc); + return rc; + } + + nvram_error_log_index = new_part->index + NVRAM_HEADER_LEN; + nvram_error_log_size = ((part->header.length - 1) * + NVRAM_BLOCK_LEN) - sizeof(struct err_log_info); + + list_add_tail(&new_part->partition, &free_part->partition); + + if (free_part->header.length <= size) { + list_del(&free_part->partition); + kfree(free_part); + return 0; + } + + /* Adjust the partition we stole the space from */ + free_part->index += size * NVRAM_BLOCK_LEN; + free_part->header.length -= size; + free_part->header.checksum = nvram_checksum(&free_part->header); + + rc = nvram_write_header(free_part); + if (rc <= 0) { + printk(KERN_ERR "nvram_create_os_partition: nvram_write_header " + "failed (%d)\n", rc); + return rc; + } + + return 0; +} + + +/* nvram_setup_partition + * + * This will setup the partition we need for buffering the + * error logs and cleanup partitions if needed. + * + * The general strategy is the following: + * 1.) If there is ppc64,linux partition large enough then use it. + * 2.) If there is not a ppc64,linux partition large enough, search + * for a free partition that is large enough. + * 3.) If there is not a free partition large enough remove + * _all_ OS partitions and consolidate the space. + * 4.) Will first try getting a chunk that will satisfy the maximum + * error log size (NVRAM_MAX_REQ). + * 5.) If the max chunk cannot be allocated then try finding a chunk + * that will satisfy the minum needed (NVRAM_MIN_REQ). + */ +static int nvram_setup_partition(void) +{ + struct list_head * p; + struct nvram_partition * part; + int rc; + + /* For now, we don't do any of this on pmac, until I + * have figured out if it's worth killing some unused stuffs + * in our nvram, as Apple defined partitions use pretty much + * all of the space + */ + if (_machine == PLATFORM_POWERMAC) + return -ENOSPC; + + /* see if we have an OS partition that meets our needs. + will try getting the max we need. If not we'll delete + partitions and try again. */ + list_for_each(p, &nvram_part->partition) { + part = list_entry(p, struct nvram_partition, partition); + if (part->header.signature != NVRAM_SIG_OS) + continue; + + if (strcmp(part->header.name, "ppc64,linux")) + continue; + + if (part->header.length >= NVRAM_MIN_REQ) { + /* found our partition */ + nvram_error_log_index = part->index + NVRAM_HEADER_LEN; + nvram_error_log_size = ((part->header.length - 1) * + NVRAM_BLOCK_LEN) - sizeof(struct err_log_info); + return 0; + } + } + + /* try creating a partition with the free space we have */ + rc = nvram_create_os_partition(); + if (!rc) { + return 0; + } + + /* need to free up some space */ + rc = nvram_remove_os_partition(); + if (rc) { + return rc; + } + + /* create a partition in this new space */ + rc = nvram_create_os_partition(); + if (rc) { + printk(KERN_ERR "nvram_create_os_partition: Could not find a " + "NVRAM partition large enough\n"); + return rc; + } + + return 0; +} + + +static int nvram_scan_partitions(void) +{ + loff_t cur_index = 0; + struct nvram_header phead; + struct nvram_partition * tmp_part; + unsigned char c_sum; + char * header; + int total_size; + int err; + + if (ppc_md.nvram_size == NULL) + return -ENODEV; + total_size = ppc_md.nvram_size(); + + header = (char *) kmalloc(NVRAM_HEADER_LEN, GFP_KERNEL); + if (!header) { + printk(KERN_ERR "nvram_scan_partitions: Failed kmalloc\n"); + return -ENOMEM; + } + + while (cur_index < total_size) { + + err = ppc_md.nvram_read(header, NVRAM_HEADER_LEN, &cur_index); + if (err != NVRAM_HEADER_LEN) { + printk(KERN_ERR "nvram_scan_partitions: Error parsing " + "nvram partitions\n"); + goto out; + } + + cur_index -= NVRAM_HEADER_LEN; /* nvram_read will advance us */ + + memcpy(&phead, header, NVRAM_HEADER_LEN); + + err = 0; + c_sum = nvram_checksum(&phead); + if (c_sum != phead.checksum) { + printk(KERN_WARNING "WARNING: nvram partition checksum" + " was %02x, should be %02x!\n", + phead.checksum, c_sum); + printk(KERN_WARNING "Terminating nvram partition scan\n"); + goto out; + } + if (!phead.length) { + printk(KERN_WARNING "WARNING: nvram corruption " + "detected: 0-length partition\n"); + goto out; + } + tmp_part = (struct nvram_partition *) + kmalloc(sizeof(struct nvram_partition), GFP_KERNEL); + err = -ENOMEM; + if (!tmp_part) { + printk(KERN_ERR "nvram_scan_partitions: kmalloc failed\n"); + goto out; + } + + memcpy(&tmp_part->header, &phead, NVRAM_HEADER_LEN); + tmp_part->index = cur_index; + list_add_tail(&tmp_part->partition, &nvram_part->partition); + + cur_index += phead.length * NVRAM_BLOCK_LEN; + } + err = 0; + + out: + kfree(header); + return err; +} + +static int __init nvram_init(void) +{ + int error; + int rc; + + if (ppc_md.nvram_size == NULL || ppc_md.nvram_size() <= 0) + return -ENODEV; + + rc = misc_register(&nvram_dev); + if (rc != 0) { + printk(KERN_ERR "nvram_init: failed to register device\n"); + return rc; + } + + /* initialize our anchor for the nvram partition list */ + nvram_part = (struct nvram_partition *) kmalloc(sizeof(struct nvram_partition), GFP_KERNEL); + if (!nvram_part) { + printk(KERN_ERR "nvram_init: Failed kmalloc\n"); + return -ENOMEM; + } + INIT_LIST_HEAD(&nvram_part->partition); + + /* Get all the NVRAM partitions */ + error = nvram_scan_partitions(); + if (error) { + printk(KERN_ERR "nvram_init: Failed nvram_scan_partitions\n"); + return error; + } + + if(nvram_setup_partition()) + printk(KERN_WARNING "nvram_init: Could not find nvram partition" + " for nvram buffered error logging.\n"); + +#ifdef DEBUG_NVRAM + nvram_print_partitions("NVRAM Partitions"); +#endif + + return rc; +} + +void __exit nvram_cleanup(void) +{ + misc_deregister( &nvram_dev ); +} + + +#ifdef CONFIG_PPC_PSERIES + +/* nvram_write_error_log + * + * We need to buffer the error logs into nvram to ensure that we have + * the failure information to decode. If we have a severe error there + * is no way to guarantee that the OS or the machine is in a state to + * get back to user land and write the error to disk. For example if + * the SCSI device driver causes a Machine Check by writing to a bad + * IO address, there is no way of guaranteeing that the device driver + * is in any state that is would also be able to write the error data + * captured to disk, thus we buffer it in NVRAM for analysis on the + * next boot. + * + * In NVRAM the partition containing the error log buffer will looks like: + * Header (in bytes): + * +-----------+----------+--------+------------+------------------+ + * | signature | checksum | length | name | data | + * |0 |1 |2 3|4 15|16 length-1| + * +-----------+----------+--------+------------+------------------+ + * + * The 'data' section would look like (in bytes): + * +--------------+------------+-----------------------------------+ + * | event_logged | sequence # | error log | + * |0 3|4 7|8 nvram_error_log_size-1| + * +--------------+------------+-----------------------------------+ + * + * event_logged: 0 if event has not been logged to syslog, 1 if it has + * sequence #: The unique sequence # for each event. (until it wraps) + * error log: The error log from event_scan + */ +int nvram_write_error_log(char * buff, int length, unsigned int err_type) +{ + int rc; + loff_t tmp_index; + struct err_log_info info; + + if (no_logging) { + return -EPERM; + } + + if (nvram_error_log_index == -1) { + return -ESPIPE; + } + + if (length > nvram_error_log_size) { + length = nvram_error_log_size; + } + + info.error_type = err_type; + info.seq_num = error_log_cnt; + + tmp_index = nvram_error_log_index; + + rc = ppc_md.nvram_write((char *)&info, sizeof(struct err_log_info), &tmp_index); + if (rc <= 0) { + printk(KERN_ERR "nvram_write_error_log: Failed nvram_write (%d)\n", rc); + return rc; + } + + rc = ppc_md.nvram_write(buff, length, &tmp_index); + if (rc <= 0) { + printk(KERN_ERR "nvram_write_error_log: Failed nvram_write (%d)\n", rc); + return rc; + } + + return 0; +} + +/* nvram_read_error_log + * + * Reads nvram for error log for at most 'length' + */ +int nvram_read_error_log(char * buff, int length, unsigned int * err_type) +{ + int rc; + loff_t tmp_index; + struct err_log_info info; + + if (nvram_error_log_index == -1) + return -1; + + if (length > nvram_error_log_size) + length = nvram_error_log_size; + + tmp_index = nvram_error_log_index; + + rc = ppc_md.nvram_read((char *)&info, sizeof(struct err_log_info), &tmp_index); + if (rc <= 0) { + printk(KERN_ERR "nvram_read_error_log: Failed nvram_read (%d)\n", rc); + return rc; + } + + rc = ppc_md.nvram_read(buff, length, &tmp_index); + if (rc <= 0) { + printk(KERN_ERR "nvram_read_error_log: Failed nvram_read (%d)\n", rc); + return rc; + } + + error_log_cnt = info.seq_num; + *err_type = info.error_type; + + return 0; +} + +/* This doesn't actually zero anything, but it sets the event_logged + * word to tell that this event is safely in syslog. + */ +int nvram_clear_error_log(void) +{ + loff_t tmp_index; + int clear_word = ERR_FLAG_ALREADY_LOGGED; + int rc; + + tmp_index = nvram_error_log_index; + + rc = ppc_md.nvram_write((char *)&clear_word, sizeof(int), &tmp_index); + if (rc <= 0) { + printk(KERN_ERR "nvram_clear_error_log: Failed nvram_write (%d)\n", rc); + return rc; + } + + return 0; +} + +#endif /* CONFIG_PPC_PSERIES */ + +module_init(nvram_init); +module_exit(nvram_cleanup); +MODULE_LICENSE("GPL"); diff --git a/arch/powerpc/kernel/rtas-rtc.c b/arch/powerpc/kernel/rtas-rtc.c index 7b948662704c..635d3b9a8811 100644 --- a/arch/powerpc/kernel/rtas-rtc.c +++ b/arch/powerpc/kernel/rtas-rtc.c @@ -15,7 +15,7 @@ unsigned long __init rtas_get_boot_time(void) { int ret[8]; int error, wait_time; - unsigned long max_wait_tb; + u64 max_wait_tb; max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; do { @@ -45,7 +45,7 @@ void rtas_get_rtc_time(struct rtc_time *rtc_tm) { int ret[8]; int error, wait_time; - unsigned long max_wait_tb; + u64 max_wait_tb; max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; do { @@ -80,7 +80,7 @@ void rtas_get_rtc_time(struct rtc_time *rtc_tm) int rtas_set_rtc_time(struct rtc_time *tm) { int error, wait_time; - unsigned long max_wait_tb; + u64 max_wait_tb; max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; do { diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 070b4b458aaf..de8479769bb7 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -130,6 +130,34 @@ unsigned long tb_last_stamp; */ DEFINE_PER_CPU(unsigned long, last_jiffy); +void __delay(unsigned long loops) +{ + unsigned long start; + int diff; + + if (__USE_RTC()) { + start = get_rtcl(); + do { + /* the RTCL register wraps at 1000000000 */ + diff = get_rtcl() - start; + if (diff < 0) + diff += 1000000000; + } while (diff < loops); + } else { + start = get_tbl(); + while (get_tbl() - start < loops) + HMT_low(); + HMT_medium(); + } +} +EXPORT_SYMBOL(__delay); + +void udelay(unsigned long usecs) +{ + __delay(tb_ticks_per_usec * usecs); +} +EXPORT_SYMBOL(udelay); + static __inline__ void timer_check_rtc(void) { /* diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index 4099ddab9205..dda5f2c72c25 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -257,6 +257,13 @@ void __init chrp_setup_arch(void) if (rtas_token("display-character") >= 0) ppc_md.progress = rtas_progress; + /* use RTAS time-of-day routines if available */ + if (rtas_token("get-time-of-day") != RTAS_UNKNOWN_SERVICE) { + ppc_md.get_boot_time = rtas_get_boot_time; + ppc_md.get_rtc_time = rtas_get_rtc_time; + ppc_md.set_rtc_time = rtas_set_rtc_time; + } + #ifdef CONFIG_BOOTX_TEXT if (ppc_md.progress == NULL && boot_text_mapped) ppc_md.progress = btext_progress; @@ -505,9 +512,11 @@ void __init chrp_init(void) ppc_md.halt = rtas_halt; ppc_md.time_init = chrp_time_init; + ppc_md.calibrate_decr = chrp_calibrate_decr; + + /* this may get overridden with rtas routines later... */ ppc_md.set_rtc_time = chrp_set_rtc_time; ppc_md.get_rtc_time = chrp_get_rtc_time; - ppc_md.calibrate_decr = chrp_calibrate_decr; #ifdef CONFIG_SMP smp_ops = &chrp_smp_ops; diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c index bb2315997d45..b616053bc331 100644 --- a/arch/powerpc/platforms/chrp/smp.c +++ b/arch/powerpc/platforms/chrp/smp.c @@ -34,6 +34,7 @@ #include <asm/machdep.h> #include <asm/smp.h> #include <asm/mpic.h> +#include <asm/rtas.h> static void __devinit smp_chrp_kick_cpu(int nr) { diff --git a/arch/powerpc/platforms/chrp/time.c b/arch/powerpc/platforms/chrp/time.c index 9e53535ddb82..737ee5d9f0aa 100644 --- a/arch/powerpc/platforms/chrp/time.c +++ b/arch/powerpc/platforms/chrp/time.c @@ -87,7 +87,6 @@ int chrp_set_rtc_time(struct rtc_time *tmarg) chrp_cmos_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); - tm.tm_year -= 1900; if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { BIN_TO_BCD(tm.tm_sec); BIN_TO_BCD(tm.tm_min); @@ -156,7 +155,7 @@ void chrp_get_rtc_time(struct rtc_time *tm) BCD_TO_BIN(mon); BCD_TO_BIN(year); } - if ((year += 1900) < 1970) + if (year < 70) year += 100; tm->tm_sec = sec; tm->tm_min = min; diff --git a/arch/powerpc/platforms/maple/time.c b/arch/powerpc/platforms/maple/time.c index 40fc07a8e606..15846cc938ac 100644 --- a/arch/powerpc/platforms/maple/time.c +++ b/arch/powerpc/platforms/maple/time.c @@ -158,6 +158,11 @@ int maple_set_rtc_time(struct rtc_time *tm) return 0; } +static struct resource rtc_iores = { + .name = "rtc", + .flags = IORESOURCE_BUSY, +}; + unsigned long __init maple_get_boot_time(void) { struct rtc_time tm; @@ -172,7 +177,11 @@ unsigned long __init maple_get_boot_time(void) printk(KERN_INFO "Maple: No device node for RTC, assuming " "legacy address (0x%x)\n", maple_rtc_addr); } - + + rtc_iores.start = maple_rtc_addr; + rtc_iores.end = maple_rtc_addr + 7; + request_resource(&ioport_resource, &rtc_iores); + maple_get_rtc_time(&tm); return mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday, tm.tm_hour, tm.tm_min, tm.tm_sec); diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 79de2310e70b..c8d2a40dc5b4 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -86,7 +86,8 @@ static int ibm_read_slot_reset_state; static int ibm_read_slot_reset_state2; static int ibm_slot_error_detail; -static int eeh_subsystem_enabled; +int eeh_subsystem_enabled; +EXPORT_SYMBOL(eeh_subsystem_enabled); /* Lock to avoid races due to multiple reports of an error */ static DEFINE_SPINLOCK(confirm_error_lock); diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index b9d9732b2e06..4a465f067ede 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -504,7 +504,7 @@ static void pseries_dedicated_idle(void) lpaca->lppaca.idle = 1; if (!need_resched()) { - start_snooze = __get_tb() + + start_snooze = get_tb() + *smt_snooze_delay * tb_ticks_per_usec; while (!need_resched() && !cpu_is_offline(cpu)) { @@ -518,7 +518,7 @@ static void pseries_dedicated_idle(void) HMT_very_low(); if (*smt_snooze_delay != 0 && - __get_tb() > start_snooze) { + get_tb() > start_snooze) { HMT_medium(); dedicated_idle_sleep(cpu); } |