diff options
Diffstat (limited to 'arch/powerpc')
| -rw-r--r-- | arch/powerpc/platforms/powernv/eeh-ioda.c | 184 |
1 files changed, 104 insertions, 80 deletions
diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c index f4d0259a63c3..09cf80be462c 100644 --- a/arch/powerpc/platforms/powernv/eeh-ioda.c +++ b/arch/powerpc/platforms/powernv/eeh-ioda.c @@ -251,122 +251,119 @@ static void ioda_eeh_phb_diag(struct eeh_pe *pe) __func__, pe->phb->global_number, rc); } -/** - * ioda_eeh_get_state - Retrieve the state of PE - * @pe: EEH PE - * - * The PE's state should be retrieved from the PEEV, PEST - * IODA tables. Since the OPAL has exported the function - * to do it, it'd better to use that. - */ -static int ioda_eeh_get_state(struct eeh_pe *pe) +static int ioda_eeh_get_phb_state(struct eeh_pe *pe) { - s64 ret = 0; + struct pnv_phb *phb = pe->phb->private_data; u8 fstate; __be16 pcierr; - u32 pe_no; - int result; - struct pci_controller *hose = pe->phb; - struct pnv_phb *phb = hose->private_data; + s64 rc; + int result = 0; + + rc = opal_pci_eeh_freeze_status(phb->opal_id, + pe->addr, + &fstate, + &pcierr, + NULL); + if (rc != OPAL_SUCCESS) { + pr_warn("%s: Failure %lld getting PHB#%x state\n", + __func__, rc, phb->hose->global_number); + return EEH_STATE_NOT_SUPPORT; + } /* - * Sanity check on PE address. The PHB PE address should - * be zero. + * Check PHB state. If the PHB is frozen for the + * first time, to dump the PHB diag-data. */ - if (pe->addr < 0 || pe->addr >= phb->ioda.total_pe) { - pr_err("%s: PE address %x out of range [0, %x] " - "on PHB#%x\n", - __func__, pe->addr, phb->ioda.total_pe, - hose->global_number); - return EEH_STATE_NOT_SUPPORT; + if (be16_to_cpu(pcierr) != OPAL_EEH_PHB_ERROR) { + result = (EEH_STATE_MMIO_ACTIVE | + EEH_STATE_DMA_ACTIVE | + EEH_STATE_MMIO_ENABLED | + EEH_STATE_DMA_ENABLED); + } else if (!(pe->state & EEH_PE_ISOLATED)) { + eeh_pe_state_mark(pe, EEH_PE_ISOLATED); + ioda_eeh_phb_diag(pe); } + return result; +} + +static int ioda_eeh_get_pe_state(struct eeh_pe *pe) +{ + struct pnv_phb *phb = pe->phb->private_data; + u8 fstate; + __be16 pcierr; + s64 rc; + int result; + /* - * If we're in middle of PE reset, return normal - * state to keep EEH core going. For PHB reset, we - * still expect to have fenced PHB cleared with - * PHB reset. + * We don't clobber hardware frozen state until PE + * reset is completed. In order to keep EEH core + * moving forward, we have to return operational + * state during PE reset. */ - if (!(pe->type & EEH_PE_PHB) && - (pe->state & EEH_PE_RESET)) { - result = (EEH_STATE_MMIO_ACTIVE | - EEH_STATE_DMA_ACTIVE | + if (pe->state & EEH_PE_RESET) { + result = (EEH_STATE_MMIO_ACTIVE | + EEH_STATE_DMA_ACTIVE | EEH_STATE_MMIO_ENABLED | EEH_STATE_DMA_ENABLED); return result; } - /* Retrieve PE status through OPAL */ - pe_no = pe->addr; - ret = opal_pci_eeh_freeze_status(phb->opal_id, pe_no, - &fstate, &pcierr, NULL); - if (ret) { - pr_err("%s: Failed to get EEH status on " - "PHB#%x-PE#%x\n, err=%lld\n", - __func__, hose->global_number, pe_no, ret); + /* Fetch state from hardware */ + rc = opal_pci_eeh_freeze_status(phb->opal_id, + pe->addr, + &fstate, + &pcierr, + NULL); + if (rc != OPAL_SUCCESS) { + pr_warn("%s: Failure %lld getting PHB#%x-PE%x state\n", + __func__, rc, phb->hose->global_number, pe->addr); return EEH_STATE_NOT_SUPPORT; } - /* Check PHB status */ - if (pe->type & EEH_PE_PHB) { - result = 0; - result &= ~EEH_STATE_RESET_ACTIVE; - - if (be16_to_cpu(pcierr) != OPAL_EEH_PHB_ERROR) { - result |= EEH_STATE_MMIO_ACTIVE; - result |= EEH_STATE_DMA_ACTIVE; - result |= EEH_STATE_MMIO_ENABLED; - result |= EEH_STATE_DMA_ENABLED; - } else if (!(pe->state & EEH_PE_ISOLATED)) { - eeh_pe_state_mark(pe, EEH_PE_ISOLATED); - ioda_eeh_phb_diag(pe); - } - - return result; - } - - /* Parse result out */ - result = 0; + /* Figure out state */ switch (fstate) { case OPAL_EEH_STOPPED_NOT_FROZEN: - result &= ~EEH_STATE_RESET_ACTIVE; - result |= EEH_STATE_MMIO_ACTIVE; - result |= EEH_STATE_DMA_ACTIVE; - result |= EEH_STATE_MMIO_ENABLED; - result |= EEH_STATE_DMA_ENABLED; + result = (EEH_STATE_MMIO_ACTIVE | + EEH_STATE_DMA_ACTIVE | + EEH_STATE_MMIO_ENABLED | + EEH_STATE_DMA_ENABLED); break; case OPAL_EEH_STOPPED_MMIO_FREEZE: - result &= ~EEH_STATE_RESET_ACTIVE; - result |= EEH_STATE_DMA_ACTIVE; - result |= EEH_STATE_DMA_ENABLED; + result = (EEH_STATE_DMA_ACTIVE | + EEH_STATE_DMA_ENABLED); break; case OPAL_EEH_STOPPED_DMA_FREEZE: - result &= ~EEH_STATE_RESET_ACTIVE; - result |= EEH_STATE_MMIO_ACTIVE; - result |= EEH_STATE_MMIO_ENABLED; + result = (EEH_STATE_MMIO_ACTIVE | + EEH_STATE_MMIO_ENABLED); break; case OPAL_EEH_STOPPED_MMIO_DMA_FREEZE: - result &= ~EEH_STATE_RESET_ACTIVE; + result = 0; break; case OPAL_EEH_STOPPED_RESET: - result |= EEH_STATE_RESET_ACTIVE; + result = EEH_STATE_RESET_ACTIVE; break; case OPAL_EEH_STOPPED_TEMP_UNAVAIL: - result |= EEH_STATE_UNAVAILABLE; + result = EEH_STATE_UNAVAILABLE; break; case OPAL_EEH_STOPPED_PERM_UNAVAIL: - result |= EEH_STATE_NOT_SUPPORT; + result = EEH_STATE_NOT_SUPPORT; break; default: - pr_warning("%s: Unexpected EEH status 0x%x " - "on PHB#%x-PE#%x\n", - __func__, fstate, hose->global_number, pe_no); + result = EEH_STATE_NOT_SUPPORT; + pr_warn("%s: Invalid PHB#%x-PE#%x state %x\n", + __func__, phb->hose->global_number, + pe->addr, fstate); } - /* Dump PHB diag-data for frozen PE */ - if (result != EEH_STATE_NOT_SUPPORT && - (result & (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE)) != - (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE) && + /* + * If the PE is switching to frozen state for the + * first time, to dump the PHB diag-data. + */ + if (!(result & EEH_STATE_NOT_SUPPORT) && + !(result & EEH_STATE_UNAVAILABLE) && + !(result & EEH_STATE_MMIO_ACTIVE) && + !(result & EEH_STATE_DMA_ACTIVE) && !(pe->state & EEH_PE_ISOLATED)) { eeh_pe_state_mark(pe, EEH_PE_ISOLATED); ioda_eeh_phb_diag(pe); @@ -375,6 +372,33 @@ static int ioda_eeh_get_state(struct eeh_pe *pe) return result; } +/** + * ioda_eeh_get_state - Retrieve the state of PE + * @pe: EEH PE + * + * The PE's state should be retrieved from the PEEV, PEST + * IODA tables. Since the OPAL has exported the function + * to do it, it'd better to use that. + */ +static int ioda_eeh_get_state(struct eeh_pe *pe) +{ + struct pnv_phb *phb = pe->phb->private_data; + + /* Sanity check on PE number. PHB PE should have 0 */ + if (pe->addr < 0 || + pe->addr >= phb->ioda.total_pe) { + pr_warn("%s: PHB#%x-PE#%x out of range [0, %x]\n", + __func__, phb->hose->global_number, + pe->addr, phb->ioda.total_pe); + return EEH_STATE_NOT_SUPPORT; + } + + if (pe->type & EEH_PE_PHB) + return ioda_eeh_get_phb_state(pe); + + return ioda_eeh_get_pe_state(pe); +} + static s64 ioda_eeh_phb_poll(struct pnv_phb *phb) { s64 rc = OPAL_HARDWARE; |