diff options
Diffstat (limited to 'arch/ppc/platforms/4xx')
| -rw-r--r-- | arch/ppc/platforms/4xx/Kconfig | 5 | ||||
| -rw-r--r-- | arch/ppc/platforms/4xx/Makefile | 1 | ||||
| -rw-r--r-- | arch/ppc/platforms/4xx/ash.c | 250 | ||||
| -rw-r--r-- | arch/ppc/platforms/4xx/ash.h | 83 |
4 files changed, 0 insertions, 339 deletions
diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig index 805dd98908a3..a7eaba91dfbf 100644 --- a/arch/ppc/platforms/4xx/Kconfig +++ b/arch/ppc/platforms/4xx/Kconfig @@ -16,11 +16,6 @@ choice depends on 40x default WALNUT -config ASH - bool "Ash" - help - This option enables support for the IBM NP405H evaluation board. - config BUBINGA bool "Bubinga" select WANT_EARLY_SERIAL diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile index 844c3b5066e8..f00e0d02ee2c 100644 --- a/arch/ppc/platforms/4xx/Makefile +++ b/arch/ppc/platforms/4xx/Makefile @@ -1,7 +1,6 @@ # # Makefile for the PowerPC 4xx linux kernel. -obj-$(CONFIG_ASH) += ash.o obj-$(CONFIG_BAMBOO) += bamboo.o obj-$(CONFIG_CPCI405) += cpci405.o obj-$(CONFIG_EBONY) += ebony.o diff --git a/arch/ppc/platforms/4xx/ash.c b/arch/ppc/platforms/4xx/ash.c deleted file mode 100644 index ce2911793716..000000000000 --- a/arch/ppc/platforms/4xx/ash.c +++ /dev/null @@ -1,250 +0,0 @@ -/* - * arch/ppc/platforms/4xx/ash.c - * - * Support for the IBM NP405H ash eval board - * - * Author: Armin Kuster <akuster@mvista.com> - * - * 2001-2002 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#include <linux/config.h> -#include <linux/init.h> -#include <linux/pagemap.h> -#include <linux/pci.h> - -#include <asm/machdep.h> -#include <asm/pci-bridge.h> -#include <asm/io.h> -#include <asm/ocp.h> -#include <asm/ibm_ocp_pci.h> -#include <asm/todc.h> - -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif - -void *ash_rtc_base; - -/* Some IRQs unique to Walnut. - * Used by the generic 405 PCI setup functions in ppc4xx_pci.c - */ -int __init -ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - static char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {24, 24, 24, 24}, /* IDSEL 1 - PCI slot 1 */ - {25, 25, 25, 25}, /* IDSEL 2 - PCI slot 2 */ - {26, 26, 26, 26}, /* IDSEL 3 - PCI slot 3 */ - {27, 27, 27, 27}, /* IDSEL 4 - PCI slot 4 */ - }; - - const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -} - -void __init -ash_setup_arch(void) -{ - ppc4xx_setup_arch(); - - ibm_ocp_set_emac(0, 3); - -#ifdef CONFIG_DEBUG_BRINGUP - int i; - printk("\n"); - printk("machine\t: %s\n", PPC4xx_MACHINE_NAME); - printk("\n"); - printk("bi_s_version\t %s\n", bip->bi_s_version); - printk("bi_r_version\t %s\n", bip->bi_r_version); - printk("bi_memsize\t 0x%8.8x\t %dMBytes\n", bip->bi_memsize, - bip->bi_memsize / (1024 * 1000)); - for (i = 0; i < EMAC_NUMS; i++) { - printk("bi_enetaddr %d\t %2.2x%2.2x%2.2x-%2.2x%2.2x%2.2x\n", i, - bip->bi_enetaddr[i][0], bip->bi_enetaddr[i][1], - bip->bi_enetaddr[i][2], bip->bi_enetaddr[i][3], - bip->bi_enetaddr[i][4], bip->bi_enetaddr[i][5]); - } - printk("bi_pci_enetaddr %d\t %2.2x%2.2x%2.2x-%2.2x%2.2x%2.2x\n", 0, - bip->bi_pci_enetaddr[0], bip->bi_pci_enetaddr[1], - bip->bi_pci_enetaddr[2], bip->bi_pci_enetaddr[3], - bip->bi_pci_enetaddr[4], bip->bi_pci_enetaddr[5]); - - printk("bi_intfreq\t 0x%8.8x\t clock:\t %dMhz\n", - bip->bi_intfreq, bip->bi_intfreq / 1000000); - - printk("bi_busfreq\t 0x%8.8x\t plb bus clock:\t %dMHz\n", - bip->bi_busfreq, bip->bi_busfreq / 1000000); - printk("bi_pci_busfreq\t 0x%8.8x\t pci bus clock:\t %dMHz\n", - bip->bi_pci_busfreq, bip->bi_pci_busfreq / 1000000); - - printk("\n"); -#endif - /* RTC step for ash */ - ash_rtc_base = (void *) ASH_RTC_VADDR; - TODC_INIT(TODC_TYPE_DS1743, ash_rtc_base, ash_rtc_base, ash_rtc_base, - 8); -} - -void __init -bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip) -{ - /* - * Expected PCI mapping: - * - * PLB addr PCI memory addr - * --------------------- --------------------- - * 0000'0000 - 7fff'ffff <--- 0000'0000 - 7fff'ffff - * 8000'0000 - Bfff'ffff ---> 8000'0000 - Bfff'ffff - * - * PLB addr PCI io addr - * --------------------- --------------------- - * e800'0000 - e800'ffff ---> 0000'0000 - 0001'0000 - * - * The following code is simplified by assuming that the bootrom - * has been well behaved in following this mapping. - */ - -#ifdef DEBUG - int i; - - printk("ioremap PCLIO_BASE = 0x%x\n", pcip); - printk("PCI bridge regs before fixup \n"); - for (i = 0; i <= 2; i++) { - printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma))); - printk(" pmm%dla\t0x%x\n", i, in_le32(&(pcip->pmm[i].la))); - printk(" pmm%dpcila\t0x%x\n", i, - in_le32(&(pcip->pmm[i].pcila))); - printk(" pmm%dpciha\t0x%x\n", i, - in_le32(&(pcip->pmm[i].pciha))); - } - printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms))); - printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la))); - printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms))); - printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la))); - for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) { - early_read_config_dword(hose, hose->first_busno, - PCI_FUNC(hose->first_busno), bar, - &bar_response); - DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n", - hose->first_busno, PCI_SLOT(hose->first_busno), - PCI_FUNC(hose->first_busno), bar, bar_response); - } - -#endif - if (ppc_md.progress) - ppc_md.progress("bios_fixup(): enter", 0x800); - - /* added for IBM boot rom version 1.15 bios bar changes -AK */ - - /* Disable region first */ - out_le32((void *) &(pcip->pmm[0].ma), 0x00000000); - /* PLB starting addr, PCI: 0x80000000 */ - out_le32((void *) &(pcip->pmm[0].la), 0x80000000); - /* PCI start addr, 0x80000000 */ - out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE); - /* 512MB range of PLB to PCI */ - out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000); - /* Enable no pre-fetch, enable region */ - out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff - - (PPC405_PCI_UPPER_MEM - - PPC405_PCI_MEM_BASE)) | 0x01)); - - /* Disable region one */ - out_le32((void *) &(pcip->pmm[1].ma), 0x00000000); - out_le32((void *) &(pcip->pmm[1].la), 0x00000000); - out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000); - out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000); - out_le32((void *) &(pcip->pmm[1].ma), 0x00000000); - - /* Disable region two */ - out_le32((void *) &(pcip->pmm[2].ma), 0x00000000); - out_le32((void *) &(pcip->pmm[2].la), 0x00000000); - out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000); - out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000); - out_le32((void *) &(pcip->pmm[2].ma), 0x00000000); - - /* Enable PTM1 and PTM2, mapped to PLB address 0. */ - - out_le32((void *) &(pcip->ptm1la), 0x00000000); - out_le32((void *) &(pcip->ptm1ms), 0x00000001); - out_le32((void *) &(pcip->ptm2la), 0x00000000); - out_le32((void *) &(pcip->ptm2ms), 0x00000001); - - /* Write zero to PTM1 BAR. */ - - early_write_config_dword(hose, hose->first_busno, - PCI_FUNC(hose->first_busno), - PCI_BASE_ADDRESS_1, - 0x00000000); - - /* Disable PTM2 (unused) */ - - out_le32((void *) &(pcip->ptm2la), 0x00000000); - out_le32((void *) &(pcip->ptm2ms), 0x00000000); - - /* end work arround */ - if (ppc_md.progress) - ppc_md.progress("bios_fixup(): done", 0x800); - -#ifdef DEBUG - printk("PCI bridge regs after fixup \n"); - for (i = 0; i <= 2; i++) { - printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma))); - printk(" pmm%dla\t0x%x\n", i, in_le32(&(pcip->pmm[i].la))); - printk(" pmm%dpcila\t0x%x\n", i, - in_le32(&(pcip->pmm[i].pcila))); - printk(" pmm%dpciha\t0x%x\n", i, - in_le32(&(pcip->pmm[i].pciha))); - } - printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms))); - printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la))); - printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms))); - printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la))); - - for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) { - early_read_config_dword(hose, hose->first_busno, - PCI_FUNC(hose->first_busno), bar, - &bar_response); - DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n", - hose->first_busno, PCI_SLOT(hose->first_busno), - PCI_FUNC(hose->first_busno), bar, bar_response); - } - - -#endif -} - -void __init -ash_map_io(void) -{ - ppc4xx_map_io(); - io_block_mapping(ASH_RTC_VADDR, ASH_RTC_PADDR, ASH_RTC_SIZE, _PAGE_IO); -} - -void __init -platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - ppc4xx_init(r3, r4, r5, r6, r7); - - ppc_md.setup_arch = ash_setup_arch; - ppc_md.setup_io_mappings = ash_map_io; - -#ifdef CONFIG_PPC_RTC - ppc_md.time_init = todc_time_init; - ppc_md.set_rtc_time = todc_set_rtc_time; - ppc_md.get_rtc_time = todc_get_rtc_time; - ppc_md.nvram_read_val = todc_direct_read_val; - ppc_md.nvram_write_val = todc_direct_write_val; -#endif -} diff --git a/arch/ppc/platforms/4xx/ash.h b/arch/ppc/platforms/4xx/ash.h deleted file mode 100644 index 5f7448ea418d..000000000000 --- a/arch/ppc/platforms/4xx/ash.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * arch/ppc/platforms/4xx/ash.h - * - * Macros, definitions, and data structures specific to the IBM PowerPC - * Ash eval board. - * - * Author: Armin Kuster <akuster@mvista.com> - * - * 2000-2002 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifdef __KERNEL__ -#ifndef __ASM_ASH_H__ -#define __ASM_ASH_H__ -#include <platforms/4xx/ibmnp405h.h> - -#ifndef __ASSEMBLY__ -/* - * Data structure defining board information maintained by the boot - * ROM on IBM's "Ash" evaluation board. An effort has been made to - * keep the field names consistent with the 8xx 'bd_t' board info - * structures. - */ - -typedef struct board_info { - unsigned char bi_s_version[4]; /* Version of this structure */ - unsigned char bi_r_version[30]; /* Version of the IBM ROM */ - unsigned int bi_memsize; /* DRAM installed, in bytes */ - unsigned char bi_enetaddr[4][6]; /* Local Ethernet MAC address */ - unsigned char bi_pci_enetaddr[6]; - unsigned int bi_intfreq; /* Processor speed, in Hz */ - unsigned int bi_busfreq; /* PLB Bus speed, in Hz */ - unsigned int bi_pci_busfreq; /* PCI speed in Hz */ -} bd_t; - -/* Some 4xx parts use a different timebase frequency from the internal clock. -*/ -#define bi_tbfreq bi_intfreq - -/* Memory map for the IBM "Ash" NP405H evaluation board. - */ - -extern void *ash_rtc_base; -#define ASH_RTC_PADDR ((uint)0xf0000000) -#define ASH_RTC_VADDR ASH_RTC_PADDR -#define ASH_RTC_SIZE ((uint)8*1024) - - -/* Early initialization address mapping for block_io. - * Standard 405GP map. - */ -#define PPC4xx_PCI_IO_PADDR ((uint)PPC405_PCI_PHY_IO_BASE) -#define PPC4xx_PCI_IO_VADDR PPC4xx_PCI_IO_PADDR -#define PPC4xx_PCI_IO_SIZE ((uint)64*1024) -#define PPC4xx_PCI_CFG_PADDR ((uint)PPC405_PCI_CONFIG_ADDR) -#define PPC4xx_PCI_CFG_VADDR PPC4xx_PCI_CFG_PADDR -#define PPC4xx_PCI_CFG_SIZE ((uint)4*1024) -#define PPC4xx_PCI_LCFG_PADDR ((uint)0xef400000) -#define PPC4xx_PCI_LCFG_VADDR PPC4xx_PCI_LCFG_PADDR -#define PPC4xx_PCI_LCFG_SIZE ((uint)4*1024) -#define PPC4xx_ONB_IO_PADDR ((uint)0xef600000) -#define PPC4xx_ONB_IO_VADDR PPC4xx_ONB_IO_PADDR -#define PPC4xx_ONB_IO_SIZE ((uint)4*1024) - -#define NR_BOARD_IRQS 32 - -#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK -#define BASE_BAUD 201600 -#else -#define BASE_BAUD 691200 -#endif - -#define PPC4xx_MACHINE_NAME "IBM NP405H Ash" - -extern char pci_irq_table[][4]; - - -#endif /* !__ASSEMBLY__ */ -#endif /* __ASM_ASH_H__ */ -#endif /* __KERNEL__ */ |