1 files changed, 273 insertions, 0 deletions
diff --git a/arch/ppc/platforms/mpc866ads_setup.c b/arch/ppc/platforms/mpc866ads_setup.c
new file mode 100644
index 000000000000..ac8fcc68afeb
--- /dev/null
+++ b/arch/ppc/platforms/mpc866ads_setup.c
@@ -0,0 +1,273 @@
+/*arch/ppc/platforms/mpc885ads-setup.c
+ *
+ * Platform setup for the Freescale mpc885ads board
+ *
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * Copyright 2005 MontaVista Software Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+
+#include <linux/fs_enet_pd.h>
+#include <linux/mii.h>
+
+#include <asm/delay.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/ppcboot.h>
+#include <asm/8xx_immap.h>
+#include <asm/commproc.h>
+#include <asm/ppc_sys.h>
+#include <asm/mpc8xx.h>
+
+extern unsigned char __res[];
+
+static struct fs_mii_bus_info fec_mii_bus_info = {
+	.method = fsmii_fec,
+	.id = 0,
+};
+
+static struct fs_mii_bus_info scc_mii_bus_info = {
+	.method = fsmii_fixed,
+	.id = 0,
+	.i.fixed.speed = 10,
+	.i.fixed.duplex = 0,
+};
+
+static struct fs_platform_info mpc8xx_fec_pdata[] = {
+	{
+	 .rx_ring = 128,
+	 .tx_ring = 16,
+	 .rx_copybreak = 240,
+
+	 .use_napi = 1,
+	 .napi_weight = 17,
+
+	 .phy_addr = 15,
+	 .phy_irq = -1,
+
+	 .use_rmii = 0,
+
+	 .bus_info = &fec_mii_bus_info,
+	 }
+};
+
+static struct fs_platform_info mpc8xx_scc_pdata = {
+	.rx_ring = 64,
+	.tx_ring = 8,
+	.rx_copybreak = 240,
+
+	.use_napi = 1,
+	.napi_weight = 17,
+
+	.phy_addr = -1,
+	.phy_irq = -1,
+
+	.bus_info = &scc_mii_bus_info,
+};
+
+void __init board_init(void)
+{
+	volatile cpm8xx_t *cp = cpmp;
+	unsigned *bcsr_io;
+
+	bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
+
+	if (bcsr_io == NULL) {
+		printk(KERN_CRIT "Could not remap BCSR1\n");
+		return;
+	}
+#ifdef CONFIG_SERIAL_CPM_SMC1
+	cp->cp_simode &= ~(0xe0000000 >> 17);	/* brg1 */
+	clrbits32(bcsr_io,(0x80000000 >> 7));
+#else
+	setbits32(bcsr_io,(0x80000000 >> 7));
+
+	cp->cp_pbpar &= ~(0x000000c0);
+	cp->cp_pbdir |= 0x000000c0;
+	cp->cp_smc[0].smc_smcmr = 0;
+	cp->cp_smc[0].smc_smce = 0;
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SMC2
+	cp->cp_simode &= ~(0xe0000000 >> 1);
+	cp->cp_simode |= (0x20000000 >> 1);	/* brg2 */
+	clrbits32(bcsr_io,(0x80000000 >> 13));
+#else
+	clrbits32(bcsr_io,(0x80000000 >> 13));
+	cp->cp_pbpar &= ~(0x00000c00);
+	cp->cp_pbdir |= 0x00000c00;
+	cp->cp_smc[1].smc_smcmr = 0;
+	cp->cp_smc[1].smc_smce = 0;
+#endif
+	iounmap(bcsr_io);
+}
+
+static void setup_fec1_ioports(void)
+{
+	immap_t *immap = (immap_t *) IMAP_ADDR;
+
+	setbits16(&immap->im_ioport.iop_pdpar, 0x1fff);
+	setbits16(&immap->im_ioport.iop_pddir, 0x1fff);
+}
+
+static void setup_scc1_ioports(void)
+{
+	immap_t *immap = (immap_t *) IMAP_ADDR;
+	unsigned *bcsr_io;
+
+	bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
+
+	if (bcsr_io == NULL) {
+		printk(KERN_CRIT "Could not remap BCSR1\n");
+		return;
+	}
+
+	/* Enable the PHY.
+	 */
+	clrbits32(bcsr_io,BCSR1_ETHEN);
+
+	/* Configure port A pins for Txd and Rxd.
+	 */
+	/* Disable receive and transmit in case EPPC-Bug started it.
+	 */
+	setbits16(&immap->im_ioport.iop_papar, PA_ENET_RXD | PA_ENET_TXD);
+	clrbits16(&immap->im_ioport.iop_padir, PA_ENET_RXD | PA_ENET_TXD);
+	clrbits16(&immap->im_ioport.iop_paodr, PA_ENET_TXD);
+
+	/* Configure port C pins to enable CLSN and RENA.
+	 */
+	clrbits16(&immap->im_ioport.iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA);
+	clrbits16(&immap->im_ioport.iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA);
+	setbits16(&immap->im_ioport.iop_pcso, PC_ENET_CLSN | PC_ENET_RENA);
+	/* Configure port A for TCLK and RCLK.
+	 */
+	setbits16(&immap->im_ioport.iop_papar, PA_ENET_TCLK | PA_ENET_RCLK);
+	clrbits16(&immap->im_ioport.iop_padir, PA_ENET_TCLK | PA_ENET_RCLK);
+	clrbits32(&immap->im_cpm.cp_pbpar, PB_ENET_TENA);
+	clrbits32(&immap->im_cpm.cp_pbdir, PB_ENET_TENA);
+
+	/* Configure Serial Interface clock routing.
+	 * First, clear all SCC bits to zero, then set the ones we want.
+	 */
+	clrbits32(&immap->im_cpm.cp_sicr, SICR_ENET_MASK);
+	setbits32(&immap->im_cpm.cp_sicr, SICR_ENET_CLKRT);
+
+	/* In the original SCC enet driver the following code is placed at
+	the end of the initialization */
+	setbits32(&immap->im_cpm.cp_pbpar, PB_ENET_TENA);
+	setbits32(&immap->im_cpm.cp_pbdir, PB_ENET_TENA);
+
+}
+
+static void mpc866ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no)
+{
+	struct fs_platform_info *fpi = pdev->dev.platform_data;
+
+	volatile cpm8xx_t *cp;
+	bd_t *bd = (bd_t *) __res;
+	char *e;
+	int i;
+
+	/* Get pointer to Communication Processor */
+	cp = cpmp;
+	switch (fs_no) {
+	case fsid_fec1:
+		fpi = &mpc8xx_fec_pdata[0];
+		fpi->init_ioports = &setup_fec1_ioports;
+
+		break;
+	case fsid_scc1:
+		fpi = &mpc8xx_scc_pdata;
+		fpi->init_ioports = &setup_scc1_ioports;
+
+		break;
+	default:
+		printk(KERN_WARNING"Device %s is not supported!\n", pdev->name);
+		return;
+	}
+
+	pdev->dev.platform_data = fpi;
+	fpi->fs_no = fs_no;
+
+	e = (unsigned char *)&bd->bi_enetaddr;
+	for (i = 0; i < 6; i++)
+		fpi->macaddr[i] = *e++;
+
+	fpi->macaddr[5 - pdev->id]++;
+
+}
+
+static void mpc866ads_fixup_fec_enet_pdata(struct platform_device *pdev,
+					   int idx)
+{
+	/* This is for FEC devices only */
+	if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-fec")))
+		return;
+	mpc866ads_fixup_enet_pdata(pdev, fsid_fec1 + pdev->id - 1);
+}
+
+static void mpc866ads_fixup_scc_enet_pdata(struct platform_device *pdev,
+					   int idx)
+{
+	/* This is for SCC devices only */
+	if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-scc")))
+		return;
+
+	mpc866ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1);
+}
+
+static int mpc866ads_platform_notify(struct device *dev)
+{
+	static const struct platform_notify_dev_map dev_map[] = {
+		{
+			.bus_id = "fsl-cpm-fec",
+			.rtn = mpc866ads_fixup_fec_enet_pdata,
+		},
+		{
+			.bus_id = "fsl-cpm-scc",
+			.rtn = mpc866ads_fixup_scc_enet_pdata,
+		},
+		{
+			.bus_id = NULL
+		}
+	};
+
+	platform_notify_map(dev_map,dev);
+
+	return 0;
+}
+
+int __init mpc866ads_init(void)
+{
+	printk(KERN_NOTICE "mpc866ads: Init\n");
+
+	platform_notify = mpc866ads_platform_notify;
+
+	ppc_sys_device_initfunc();
+	ppc_sys_device_disable_all();
+
+#ifdef MPC8xx_SECOND_ETH_SCC1
+	ppc_sys_device_enable(MPC8xx_CPM_SCC1);
+#endif
+	ppc_sys_device_enable(MPC8xx_CPM_FEC1);
+
+	return 0;
+}
+
+arch_initcall(mpc866ads_init);