diff options
Diffstat (limited to 'arch/ppc64')
39 files changed, 640 insertions, 1104 deletions
diff --git a/arch/ppc64/Kconfig b/arch/ppc64/Kconfig index ef1f05e437c4..5cb343883e4d 100644 --- a/arch/ppc64/Kconfig +++ b/arch/ppc64/Kconfig @@ -40,6 +40,10 @@ config COMPAT bool default y +config SCHED_NO_NO_OMIT_FRAME_POINTER + bool + default y + # We optimistically allocate largepages from the VM, so make the limit # large enough (16MB). This badly named config option is actually # max order + 1 @@ -258,6 +262,7 @@ config PPC_RTAS config RTAS_PROC bool "Proc interface to RTAS" depends on PPC_RTAS + default y config RTAS_FLASH tristate "Firmware flash interface" @@ -293,6 +298,9 @@ config SECCOMP endmenu +config ISA_DMA_API + bool + default y menu "General setup" diff --git a/arch/ppc64/Kconfig.debug b/arch/ppc64/Kconfig.debug index e341a129da80..46b1ce58da3b 100644 --- a/arch/ppc64/Kconfig.debug +++ b/arch/ppc64/Kconfig.debug @@ -5,6 +5,9 @@ source "lib/Kconfig.debug" config DEBUG_STACKOVERFLOW bool "Check for stack overflows" depends on DEBUG_KERNEL + help + This option will cause messages to be printed if free stack space + drops below a certain limit. config KPROBES bool "Kprobes" diff --git a/arch/ppc64/boot/main.c b/arch/ppc64/boot/main.c index b0fa86ad8b1b..da12ea2ca464 100644 --- a/arch/ppc64/boot/main.c +++ b/arch/ppc64/boot/main.c @@ -14,7 +14,6 @@ #include <linux/string.h> #include <asm/processor.h> #include <asm/page.h> -#include <asm/bootinfo.h> extern void *finddevice(const char *); extern int getprop(void *, const char *, void *, int); diff --git a/arch/ppc64/boot/prom.c b/arch/ppc64/boot/prom.c index 7b607d1862cb..d5218b15824e 100644 --- a/arch/ppc64/boot/prom.c +++ b/arch/ppc64/boot/prom.c @@ -11,6 +11,23 @@ #include <linux/string.h> #include <linux/ctype.h> +extern __u32 __div64_32(unsigned long long *dividend, __u32 divisor); + +/* The unnecessary pointer compare is there + * to check for type safety (n must be 64bit) + */ +# define do_div(n,base) ({ \ + __u32 __base = (base); \ + __u32 __rem; \ + (void)(((typeof((n)) *)0) == ((unsigned long long *)0)); \ + if (((n) >> 32) == 0) { \ + __rem = (__u32)(n) % __base; \ + (n) = (__u32)(n) / __base; \ + } else \ + __rem = __div64_32(&(n), __base); \ + __rem; \ + }) + int (*prom)(void *); void *chosen_handle; @@ -352,7 +369,7 @@ static int skip_atoi(const char **s) #define SPECIAL 32 /* 0x */ #define LARGE 64 /* use 'ABCDEF' instead of 'abcdef' */ -static char * number(char * str, long num, int base, int size, int precision, int type) +static char * number(char * str, unsigned long long num, int base, int size, int precision, int type) { char c,sign,tmp[66]; const char *digits="0123456789abcdefghijklmnopqrstuvwxyz"; @@ -367,9 +384,9 @@ static char * number(char * str, long num, int base, int size, int precision, in c = (type & ZEROPAD) ? '0' : ' '; sign = 0; if (type & SIGN) { - if (num < 0) { + if ((signed long long)num < 0) { sign = '-'; - num = -num; + num = - (signed long long)num; size--; } else if (type & PLUS) { sign = '+'; @@ -389,8 +406,7 @@ static char * number(char * str, long num, int base, int size, int precision, in if (num == 0) tmp[i++]='0'; else while (num != 0) { - tmp[i++] = digits[num % base]; - num /= base; + tmp[i++] = digits[do_div(num, base)]; } if (i > precision) precision = i; @@ -426,7 +442,7 @@ int sprintf(char * buf, const char *fmt, ...); int vsprintf(char *buf, const char *fmt, va_list args) { int len; - unsigned long num; + unsigned long long num; int i, base; char * str; const char *s; diff --git a/arch/ppc64/boot/start.c b/arch/ppc64/boot/start.c deleted file mode 100644 index ea247e79b55e..000000000000 --- a/arch/ppc64/boot/start.c +++ /dev/null @@ -1,654 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <stdarg.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/ctype.h> - -#include <asm/div64.h> - -int (*prom)(void *); - -void *chosen_handle; -void *stdin; -void *stdout; -void *stderr; - -void exit(void); -void *finddevice(const char *name); -int getprop(void *phandle, const char *name, void *buf, int buflen); -void chrpboot(int a1, int a2, void *prom); /* in main.c */ - -void printk(char *fmt, ...); - -void -start(int a1, int a2, void *promptr) -{ - prom = (int (*)(void *)) promptr; - chosen_handle = finddevice("/chosen"); - if (chosen_handle == (void *) -1) - exit(); - if (getprop(chosen_handle, "stdout", &stdout, sizeof(stdout)) != 4) - exit(); - stderr = stdout; - if (getprop(chosen_handle, "stdin", &stdin, sizeof(stdin)) != 4) - exit(); - - chrpboot(a1, a2, promptr); - for (;;) - exit(); -} - -int -write(void *handle, void *ptr, int nb) -{ - struct prom_args { - char *service; - int nargs; - int nret; - void *ihandle; - void *addr; - int len; - int actual; - } args; - - args.service = "write"; - args.nargs = 3; - args.nret = 1; - args.ihandle = handle; - args.addr = ptr; - args.len = nb; - args.actual = -1; - (*prom)(&args); - return args.actual; -} - -int -read(void *handle, void *ptr, int nb) -{ - struct prom_args { - char *service; - int nargs; - int nret; - void *ihandle; - void *addr; - int len; - int actual; - } args; - - args.service = "read"; - args.nargs = 3; - args.nret = 1; - args.ihandle = handle; - args.addr = ptr; - args.len = nb; - args.actual = -1; - (*prom)(&args); - return args.actual; -} - -void -exit() -{ - struct prom_args { - char *service; - } args; - - for (;;) { - args.service = "exit"; - (*prom)(&args); - } -} - -void -pause(void) -{ - struct prom_args { - char *service; - } args; - - args.service = "enter"; - (*prom)(&args); -} - -void * -finddevice(const char *name) -{ - struct prom_args { - char *service; - int nargs; - int nret; - const char *devspec; - void *phandle; - } args; - - args.service = "finddevice"; - args.nargs = 1; - args.nret = 1; - args.devspec = name; - args.phandle = (void *) -1; - (*prom)(&args); - return args.phandle; -} - -void * -claim(unsigned long virt, unsigned long size, unsigned long align) -{ - struct prom_args { - char *service; - int nargs; - int nret; - unsigned int virt; - unsigned int size; - unsigned int align; - void *ret; - } args; - - args.service = "claim"; - args.nargs = 3; - args.nret = 1; - args.virt = virt; - args.size = size; - args.align = align; - (*prom)(&args); - return args.ret; -} - -int -getprop(void *phandle, const char *name, void *buf, int buflen) -{ - struct prom_args { - char *service; - int nargs; - int nret; - void *phandle; - const char *name; - void *buf; - int buflen; - int size; - } args; - - args.service = "getprop"; - args.nargs = 4; - args.nret = 1; - args.phandle = phandle; - args.name = name; - args.buf = buf; - args.buflen = buflen; - args.size = -1; - (*prom)(&args); - return args.size; -} - -int -putc(int c, void *f) -{ - char ch = c; - - if (c == '\n') - putc('\r', f); - return write(f, &ch, 1) == 1? c: -1; -} - -int -putchar(int c) -{ - return putc(c, stdout); -} - -int -fputs(char *str, void *f) -{ - int n = strlen(str); - - return write(f, str, n) == n? 0: -1; -} - -int -readchar(void) -{ - char ch; - - for (;;) { - switch (read(stdin, &ch, 1)) { - case 1: - return ch; - case -1: - printk("read(stdin) returned -1\r\n"); - return -1; - } - } -} - -static char line[256]; -static char *lineptr; -static int lineleft; - -int -getchar(void) -{ - int c; - - if (lineleft == 0) { - lineptr = line; - for (;;) { - c = readchar(); - if (c == -1 || c == 4) - break; - if (c == '\r' || c == '\n') { - *lineptr++ = '\n'; - putchar('\n'); - break; - } - switch (c) { - case 0177: - case '\b': - if (lineptr > line) { - putchar('\b'); - putchar(' '); - putchar('\b'); - --lineptr; - } - break; - case 'U' & 0x1F: - while (lineptr > line) { - putchar('\b'); - putchar(' '); - putchar('\b'); - --lineptr; - } - break; - default: - if (lineptr >= &line[sizeof(line) - 1]) - putchar('\a'); - else { - putchar(c); - *lineptr++ = c; - } - } - } - lineleft = lineptr - line; - lineptr = line; - } - if (lineleft == 0) - return -1; - --lineleft; - return *lineptr++; -} - - - -/* String functions lifted from lib/vsprintf.c and lib/ctype.c */ -unsigned char _ctype[] = { -_C,_C,_C,_C,_C,_C,_C,_C, /* 0-7 */ -_C,_C|_S,_C|_S,_C|_S,_C|_S,_C|_S,_C,_C, /* 8-15 */ -_C,_C,_C,_C,_C,_C,_C,_C, /* 16-23 */ -_C,_C,_C,_C,_C,_C,_C,_C, /* 24-31 */ -_S|_SP,_P,_P,_P,_P,_P,_P,_P, /* 32-39 */ -_P,_P,_P,_P,_P,_P,_P,_P, /* 40-47 */ -_D,_D,_D,_D,_D,_D,_D,_D, /* 48-55 */ -_D,_D,_P,_P,_P,_P,_P,_P, /* 56-63 */ -_P,_U|_X,_U|_X,_U|_X,_U|_X,_U|_X,_U|_X,_U, /* 64-71 */ -_U,_U,_U,_U,_U,_U,_U,_U, /* 72-79 */ -_U,_U,_U,_U,_U,_U,_U,_U, /* 80-87 */ -_U,_U,_U,_P,_P,_P,_P,_P, /* 88-95 */ -_P,_L|_X,_L|_X,_L|_X,_L|_X,_L|_X,_L|_X,_L, /* 96-103 */ -_L,_L,_L,_L,_L,_L,_L,_L, /* 104-111 */ -_L,_L,_L,_L,_L,_L,_L,_L, /* 112-119 */ -_L,_L,_L,_P,_P,_P,_P,_C, /* 120-127 */ -0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 128-143 */ -0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 144-159 */ -_S|_SP,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P, /* 160-175 */ -_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P, /* 176-191 */ -_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U, /* 192-207 */ -_U,_U,_U,_U,_U,_U,_U,_P,_U,_U,_U,_U,_U,_U,_U,_L, /* 208-223 */ -_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L, /* 224-239 */ -_L,_L,_L,_L,_L,_L,_L,_P,_L,_L,_L,_L,_L,_L,_L,_L}; /* 240-255 */ - -size_t strnlen(const char * s, size_t count) -{ - const char *sc; - - for (sc = s; count-- && *sc != '\0'; ++sc) - /* nothing */; - return sc - s; -} - -unsigned long simple_strtoul(const char *cp,char **endp,unsigned int base) -{ - unsigned long result = 0,value; - - if (!base) { - base = 10; - if (*cp == '0') { - base = 8; - cp++; - if ((*cp == 'x') && isxdigit(cp[1])) { - cp++; - base = 16; - } - } - } - while (isxdigit(*cp) && - (value = isdigit(*cp) ? *cp-'0' : toupper(*cp)-'A'+10) < base) { - result = result*base + value; - cp++; - } - if (endp) - *endp = (char *)cp; - return result; -} - -long simple_strtol(const char *cp,char **endp,unsigned int base) -{ - if(*cp=='-') - return -simple_strtoul(cp+1,endp,base); - return simple_strtoul(cp,endp,base); -} - -static int skip_atoi(const char **s) -{ - int i=0; - - while (isdigit(**s)) - i = i*10 + *((*s)++) - '0'; - return i; -} - -#define ZEROPAD 1 /* pad with zero */ -#define SIGN 2 /* unsigned/signed long */ -#define PLUS 4 /* show plus */ -#define SPACE 8 /* space if plus */ -#define LEFT 16 /* left justified */ -#define SPECIAL 32 /* 0x */ -#define LARGE 64 /* use 'ABCDEF' instead of 'abcdef' */ - -static char * number(char * str, long long num, int base, int size, int precision, int type) -{ - char c,sign,tmp[66]; - const char *digits="0123456789abcdefghijklmnopqrstuvwxyz"; - int i; - - if (type & LARGE) - digits = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ"; - if (type & LEFT) - type &= ~ZEROPAD; - if (base < 2 || base > 36) - return 0; - c = (type & ZEROPAD) ? '0' : ' '; - sign = 0; - if (type & SIGN) { - if (num < 0) { - sign = '-'; - num = -num; - size--; - } else if (type & PLUS) { - sign = '+'; - size--; - } else if (type & SPACE) { - sign = ' '; - size--; - } - } - if (type & SPECIAL) { - if (base == 16) - size -= 2; - else if (base == 8) - size--; - } - i = 0; - if (num == 0) - tmp[i++]='0'; - else while (num != 0) - tmp[i++] = digits[do_div(num,base)]; - if (i > precision) - precision = i; - size -= precision; - if (!(type&(ZEROPAD+LEFT))) - while(size-->0) - *str++ = ' '; - if (sign) - *str++ = sign; - if (type & SPECIAL) { - if (base==8) - *str++ = '0'; - else if (base==16) { - *str++ = '0'; - *str++ = digits[33]; - } - } - if (!(type & LEFT)) - while (size-- > 0) - *str++ = c; - while (i < precision--) - *str++ = '0'; - while (i-- > 0) - *str++ = tmp[i]; - while (size-- > 0) - *str++ = ' '; - return str; -} - -/* Forward decl. needed for IP address printing stuff... */ -int sprintf(char * buf, const char *fmt, ...); - -int vsprintf(char *buf, const char *fmt, va_list args) -{ - int len; - unsigned long long num; - int i, base; - char * str; - const char *s; - - int flags; /* flags to number() */ - - int field_width; /* width of output field */ - int precision; /* min. # of digits for integers; max - number of chars for from string */ - int qualifier; /* 'h', 'l', or 'L' for integer fields */ - /* 'z' support added 23/7/1999 S.H. */ - /* 'z' changed to 'Z' --davidm 1/25/99 */ - - - for (str=buf ; *fmt ; ++fmt) { - if (*fmt != '%') { - *str++ = *fmt; - continue; - } - - /* process flags */ - flags = 0; - repeat: - ++fmt; /* this also skips first '%' */ - switch (*fmt) { - case '-': flags |= LEFT; goto repeat; - case '+': flags |= PLUS; goto repeat; - case ' ': flags |= SPACE; goto repeat; - case '#': flags |= SPECIAL; goto repeat; - case '0': flags |= ZEROPAD; goto repeat; - } - - /* get field width */ - field_width = -1; - if (isdigit(*fmt)) - field_width = skip_atoi(&fmt); - else if (*fmt == '*') { - ++fmt; - /* it's the next argument */ - field_width = va_arg(args, int); - if (field_width < 0) { - field_width = -field_width; - flags |= LEFT; - } - } - - /* get the precision */ - precision = -1; - if (*fmt == '.') { - ++fmt; - if (isdigit(*fmt)) - precision = skip_atoi(&fmt); - else if (*fmt == '*') { - ++fmt; - /* it's the next argument */ - precision = va_arg(args, int); - } - if (precision < 0) - precision = 0; - } - - /* get the conversion qualifier */ - qualifier = -1; - if (*fmt == 'h' || *fmt == 'l' || *fmt == 'L' || *fmt =='Z') { - qualifier = *fmt; - ++fmt; - } - - /* default base */ - base = 10; - - switch (*fmt) { - case 'c': - if (!(flags & LEFT)) - while (--field_width > 0) - *str++ = ' '; - *str++ = (unsigned char) va_arg(args, int); - while (--field_width > 0) - *str++ = ' '; - continue; - - case 's': - s = va_arg(args, char *); - if (!s) - s = "<NULL>"; - - len = strnlen(s, precision); - - if (!(flags & LEFT)) - while (len < field_width--) - *str++ = ' '; - for (i = 0; i < len; ++i) - *str++ = *s++; - while (len < field_width--) - *str++ = ' '; - continue; - - case 'p': - if (field_width == -1) { - field_width = 2*sizeof(void *); - flags |= ZEROPAD; - } - str = number(str, - (unsigned long) va_arg(args, void *), 16, - field_width, precision, flags); - continue; - - - case 'n': - if (qualifier == 'l') { - long * ip = va_arg(args, long *); - *ip = (str - buf); - } else if (qualifier == 'Z') { - size_t * ip = va_arg(args, size_t *); - *ip = (str - buf); - } else { - int * ip = va_arg(args, int *); - *ip = (str - buf); - } - continue; - - case '%': - *str++ = '%'; - continue; - - /* integer number formats - set up the flags and "break" */ - case 'o': - base = 8; - break; - - case 'X': - flags |= LARGE; - case 'x': - base = 16; - break; - - case 'd': - case 'i': - flags |= SIGN; - case 'u': - break; - - default: - *str++ = '%'; - if (*fmt) - *str++ = *fmt; - else - --fmt; - continue; - } - if (qualifier == 'L') - num = va_arg(args, long long); - else if (qualifier == 'l') { - num = va_arg(args, unsigned long); - if (flags & SIGN) - num = (signed long) num; - } else if (qualifier == 'Z') { - num = va_arg(args, size_t); - } else if (qualifier == 'h') { - num = (unsigned short) va_arg(args, int); - if (flags & SIGN) - num = (signed short) num; - } else { - num = va_arg(args, unsigned int); - if (flags & SIGN) - num = (signed int) num; - } - str = number(str, num, base, field_width, precision, flags); - } - *str = '\0'; - return str-buf; -} - -int sprintf(char * buf, const char *fmt, ...) -{ - va_list args; - int i; - - va_start(args, fmt); - i=vsprintf(buf,fmt,args); - va_end(args); - return i; -} - -static char sprint_buf[1024]; - -void -printk(char *fmt, ...) -{ - va_list args; - int n; - - va_start(args, fmt); - n = vsprintf(sprint_buf, fmt, args); - va_end(args); - write(stdout, sprint_buf, n); -} - -int -printf(char *fmt, ...) -{ - va_list args; - int n; - - va_start(args, fmt); - n = vsprintf(sprint_buf, fmt, args); - va_end(args); - write(stdout, sprint_buf, n); - return n; -} diff --git a/arch/ppc64/configs/g5_defconfig b/arch/ppc64/configs/g5_defconfig index 0f90df0b3f9c..1eb33398648e 100644 --- a/arch/ppc64/configs/g5_defconfig +++ b/arch/ppc64/configs/g5_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11 -# Thu Mar 10 16:47:04 2005 +# Linux kernel version: 2.6.12-rc6 +# Tue Jun 14 16:59:20 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y -CONFIG_FRAME_POINTER=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -31,19 +32,20 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=17 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 @@ -87,6 +89,8 @@ CONFIG_NR_CPUS=2 # CONFIG_SCHED_SMT is not set # CONFIG_PREEMPT is not set CONFIG_GENERIC_HARDIRQS=y +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # General setup @@ -97,6 +101,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # CONFIG_HOTPLUG_CPU is not set # @@ -105,10 +110,6 @@ CONFIG_PCI_NAMES=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set @@ -293,7 +294,6 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set @@ -301,7 +301,6 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -310,6 +309,7 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set @@ -332,6 +332,7 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +# CONFIG_DM_MULTIPATH is not set # # Fusion MPT device support @@ -394,7 +395,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y CONFIG_NET_KEY=m CONFIG_INET=y @@ -564,6 +564,8 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SK98LIN is not set CONFIG_TIGON3=m +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set # # Ethernet (10000 Mbit) @@ -631,18 +633,6 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -660,6 +650,16 @@ CONFIG_INPUT_MOUSE=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -676,6 +676,7 @@ CONFIG_HW_CONSOLE=y # Non-8250 serial port support # # CONFIG_SERIAL_PMACZILOG is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -698,9 +699,12 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Ftape, the floppy tape device driver # +CONFIG_AGP=m +CONFIG_AGP_UNINORTH=m # CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set # # TPM devices @@ -730,12 +734,11 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set CONFIG_I2C_KEYWEST=y -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set @@ -772,6 +775,7 @@ CONFIG_I2C_KEYWEST=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set @@ -785,6 +789,7 @@ CONFIG_I2C_KEYWEST=y # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -817,6 +822,11 @@ CONFIG_I2C_KEYWEST=y # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set @@ -830,6 +840,7 @@ CONFIG_FB_OF=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set +# CONFIG_FB_NVIDIA is not set CONFIG_FB_RIVA=y # CONFIG_FB_RIVA_I2C is not set # CONFIG_FB_RIVA_DEBUG is not set @@ -847,6 +858,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -880,6 +892,8 @@ CONFIG_LCD_DEVICE=y # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -890,8 +904,6 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers @@ -917,7 +929,6 @@ CONFIG_USB_PRINTER=y # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_RW_DETECT=y CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y @@ -1004,8 +1015,10 @@ CONFIG_USB_MON=y # CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set CONFIG_USB_SERIAL_BELKIN=m CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set CONFIG_USB_SERIAL_CYPRESS_M8=m CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m @@ -1034,6 +1047,7 @@ CONFIG_USB_SERIAL_KLSI=m CONFIG_USB_SERIAL_KOBIL_SCT=m CONFIG_USB_SERIAL_MCT_U232=m CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set CONFIG_USB_SERIAL_SAFE=m CONFIG_USB_SERIAL_SAFE_PADDED=y CONFIG_USB_SERIAL_TI=m @@ -1270,11 +1284,13 @@ CONFIG_OPROFILE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y -# CONFIG_PRINTK_TIME is not set +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set diff --git a/arch/ppc64/configs/iSeries_defconfig b/arch/ppc64/configs/iSeries_defconfig index a39e9d2e25da..f6a2b99afd63 100644 --- a/arch/ppc64/configs/iSeries_defconfig +++ b/arch/ppc64/configs/iSeries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc3-bk6 -# Wed Feb 9 23:34:52 2005 +# Linux kernel version: 2.6.12-rc6 +# Tue Jun 14 17:01:28 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y -CONFIG_FRAME_POINTER=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -30,24 +31,29 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=17 +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -79,6 +85,8 @@ CONFIG_NR_CPUS=32 CONFIG_GENERIC_HARDIRQS=y CONFIG_MSCHUNKS=y CONFIG_LPARCFG=y +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # General setup @@ -89,6 +97,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support @@ -96,10 +105,6 @@ CONFIG_PCI_NAMES=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set @@ -210,7 +215,6 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set @@ -219,7 +223,6 @@ CONFIG_SCSI_IBMVSCSI=m # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -228,6 +231,7 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set @@ -250,6 +254,7 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +# CONFIG_DM_MULTIPATH is not set # # Fusion MPT device support @@ -280,7 +285,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y CONFIG_NET_KEY=m CONFIG_INET=y @@ -445,7 +449,6 @@ CONFIG_PCNET32=y # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y -# CONFIG_E100_NAPI is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set @@ -471,6 +474,7 @@ CONFIG_E1000=m # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) @@ -539,14 +543,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -556,6 +552,12 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # # CONFIG_SERIAL_NONSTANDARD is not set @@ -570,6 +572,7 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_SERIAL_CORE=m CONFIG_SERIAL_ICOM=m +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -592,9 +595,16 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Ftape, the floppy tape device driver # +# CONFIG_AGP is not set # CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set # # I2C support @@ -633,13 +643,9 @@ CONFIG_MAX_RAW_DEVS=256 # # USB support # -# CONFIG_USB is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# +# CONFIG_USB is not set # # USB Gadget Support @@ -848,10 +854,13 @@ CONFIG_OPROFILE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set @@ -881,6 +890,7 @@ CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m diff --git a/arch/ppc64/configs/maple_defconfig b/arch/ppc64/configs/maple_defconfig index cf527501915c..8051b0f47b6f 100644 --- a/arch/ppc64/configs/maple_defconfig +++ b/arch/ppc64/configs/maple_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc3-bk6 -# Wed Feb 9 23:34:53 2005 +# Linux kernel version: 2.6.12-rc6 +# Tue Jun 14 17:12:48 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y -CONFIG_FRAME_POINTER=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -30,24 +31,28 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_AUDIT is not set # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -84,6 +89,8 @@ CONFIG_NR_CPUS=2 # CONFIG_SCHED_SMT is not set # CONFIG_PREEMPT is not set CONFIG_GENERIC_HARDIRQS=y +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # General setup @@ -94,6 +101,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support @@ -101,10 +109,6 @@ CONFIG_PCI_NAMES=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set @@ -261,7 +265,6 @@ CONFIG_NET=y # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -376,6 +379,8 @@ CONFIG_E1000=y # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set # # Ethernet (10000 Mbit) @@ -432,14 +437,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -449,6 +446,12 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -469,7 +472,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -492,8 +495,15 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Ftape, the floppy tape device driver # +# CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set # # I2C support @@ -518,8 +528,8 @@ CONFIG_I2C_ALGOBIT=y CONFIG_I2C_AMD8111=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -545,7 +555,9 @@ CONFIG_I2C_AMD8111=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -556,9 +568,11 @@ CONFIG_I2C_AMD8111=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set @@ -568,6 +582,7 @@ CONFIG_I2C_AMD8111=y # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -615,6 +630,8 @@ CONFIG_DUMMY_CONSOLE=y # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -625,8 +642,6 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers @@ -635,6 +650,8 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_SPLIT_ISO=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set @@ -688,6 +705,7 @@ CONFIG_USB_HIDINPUT=y CONFIG_USB_PEGASUS=y # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y # # USB port drivers @@ -699,8 +717,10 @@ CONFIG_USB_PEGASUS=y CONFIG_USB_SERIAL=y # CONFIG_USB_SERIAL_CONSOLE is not set CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set CONFIG_USB_SERIAL_CYPRESS_M8=m # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set @@ -729,6 +749,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set CONFIG_USB_SERIAL_TI=m # CONFIG_USB_SERIAL_CYBERJACK is not set @@ -750,6 +771,7 @@ CONFIG_USB_EZUSB=y # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_TEST is not set # @@ -936,10 +958,13 @@ CONFIG_NLS_UTF8=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_SCHEDSTATS is not set CONFIG_DEBUG_SLAB=y +# CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set @@ -971,6 +996,7 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set diff --git a/arch/ppc64/configs/pSeries_defconfig b/arch/ppc64/configs/pSeries_defconfig index 4fecf237d5c9..3eb5ef25d3a3 100644 --- a/arch/ppc64/configs/pSeries_defconfig +++ b/arch/ppc64/configs/pSeries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc3-bk6 -# Wed Feb 9 23:34:54 2005 +# Linux kernel version: 2.6.12-rc6 +# Tue Jun 14 17:13:47 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y -CONFIG_FRAME_POINTER=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -30,24 +31,29 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=17 +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_CPUSETS=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -89,9 +95,12 @@ CONFIG_SCHED_SMT=y CONFIG_EEH=y CONFIG_GENERIC_HARDIRQS=y CONFIG_PPC_RTAS=y +CONFIG_RTAS_PROC=y CONFIG_RTAS_FLASH=m CONFIG_SCANLOG=m CONFIG_LPARCFG=y +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # General setup @@ -102,6 +111,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set CONFIG_HOTPLUG_CPU=y # @@ -110,10 +120,6 @@ CONFIG_HOTPLUG_CPU=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # PCI Hotplug Support # CONFIG_HOTPLUG_PCI=m @@ -147,11 +153,10 @@ CONFIG_FW_LOADER=y # CONFIG_PARPORT=m CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_OTHER is not set +# CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_1284 is not set # @@ -293,7 +298,6 @@ CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set @@ -310,7 +314,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_IPR=y CONFIG_SCSI_IPR_TRACE=y CONFIG_SCSI_IPR_DUMP=y -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -319,6 +322,7 @@ CONFIG_SCSI_QLA22XX=m CONFIG_SCSI_QLA2300=m CONFIG_SCSI_QLA2322=m CONFIG_SCSI_QLA6312=m +CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set @@ -341,6 +345,8 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m # # Fusion MPT device support @@ -371,7 +377,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y CONFIG_NET_KEY=m CONFIG_INET=y @@ -539,7 +544,6 @@ CONFIG_PCNET32=y # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y -# CONFIG_E100_NAPI is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set @@ -565,6 +569,8 @@ CONFIG_E1000=y # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set # # Ethernet (10000 Mbit) @@ -636,20 +642,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -669,6 +661,18 @@ CONFIG_INPUT_PCSPKR=m # CONFIG_INPUT_UINPUT is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -689,8 +693,8 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set CONFIG_SERIAL_ICOM=m +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -718,9 +722,16 @@ CONFIG_HVCS=m # # Ftape, the floppy tape device driver # +# CONFIG_AGP is not set # CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=1024 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set # # I2C support @@ -745,8 +756,8 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set @@ -773,7 +784,9 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -784,9 +797,11 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set @@ -796,6 +811,7 @@ CONFIG_I2C_ALGOBIT=y # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -828,8 +844,13 @@ CONFIG_I2C_ALGOBIT=y # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y -# CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set @@ -838,6 +859,7 @@ CONFIG_FB_OF=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set +# CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set CONFIG_FB_MATROX=y CONFIG_FB_MATROX_MILLENIUM=y @@ -858,6 +880,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -891,6 +914,8 @@ CONFIG_LCD_DEVICE=y # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -901,8 +926,6 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers @@ -911,6 +934,8 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -926,12 +951,11 @@ CONFIG_USB_OHCI_HCD=y # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_RW_DETECT is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set +# CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set @@ -975,6 +999,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y # # USB port drivers @@ -1000,6 +1025,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_TEST is not set # @@ -1208,10 +1234,13 @@ CONFIG_OPROFILE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set @@ -1243,6 +1272,7 @@ CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m diff --git a/arch/ppc64/defconfig b/arch/ppc64/defconfig index 537b1cc82eab..2f31bf3046f9 100644 --- a/arch/ppc64/defconfig +++ b/arch/ppc64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc3-bk6 -# Wed Feb 9 23:34:51 2005 +# Linux kernel version: 2.6.12-rc5-git9 +# Sun Jun 5 09:26:47 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y -CONFIG_FRAME_POINTER=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -30,24 +31,28 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_AUDIT is not set CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_CPUSETS=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -91,9 +96,12 @@ CONFIG_DISCONTIGMEM=y CONFIG_EEH=y CONFIG_GENERIC_HARDIRQS=y CONFIG_PPC_RTAS=y +CONFIG_RTAS_PROC=y CONFIG_RTAS_FLASH=m CONFIG_SCANLOG=m CONFIG_LPARCFG=y +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # General setup @@ -104,6 +112,7 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m # CONFIG_PCI_LEGACY_PROC is not set # CONFIG_PCI_NAMES is not set +# CONFIG_PCI_DEBUG is not set CONFIG_HOTPLUG_CPU=y # @@ -112,10 +121,6 @@ CONFIG_HOTPLUG_CPU=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # PCI Hotplug Support # CONFIG_HOTPLUG_PCI=m @@ -149,11 +154,10 @@ CONFIG_FW_LOADER=y # CONFIG_PARPORT=m CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_OTHER is not set +# CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_1284 is not set # @@ -301,6 +305,7 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_NV is not set # CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set # CONFIG_SCSI_SATA_SIS is not set @@ -310,7 +315,6 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set @@ -327,7 +331,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_IPR=y CONFIG_SCSI_IPR_TRACE=y CONFIG_SCSI_IPR_DUMP=y -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -336,6 +339,7 @@ CONFIG_SCSI_QLA22XX=m CONFIG_SCSI_QLA2300=m CONFIG_SCSI_QLA2322=m CONFIG_SCSI_QLA6312=m +CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set CONFIG_SCSI_DEBUG=m @@ -358,6 +362,8 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m # # Fusion MPT device support @@ -405,6 +411,7 @@ CONFIG_IEEE1394_AMDTP=m # CONFIG_ADB=y CONFIG_ADB_PMU=y +CONFIG_PMAC_SMU=y # CONFIG_PMAC_PBOOK is not set # CONFIG_PMAC_BACKLIGHT is not set # CONFIG_INPUT_ADBHID is not set @@ -420,7 +427,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y CONFIG_NET_KEY=m CONFIG_INET=y @@ -588,7 +594,6 @@ CONFIG_PCNET32=y # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y -# CONFIG_E100_NAPI is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set @@ -614,6 +619,8 @@ CONFIG_E1000=y # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set # # Ethernet (10000 Mbit) @@ -683,20 +690,6 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -716,6 +709,18 @@ CONFIG_INPUT_PCSPKR=m # CONFIG_INPUT_UINPUT is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -738,6 +743,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_PMACZILOG is not set CONFIG_SERIAL_ICOM=m +CONFIG_SERIAL_JSM=m CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -766,9 +772,16 @@ CONFIG_HVCS=m # # Ftape, the floppy tape device driver # +# CONFIG_AGP is not set # CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set # # I2C support @@ -793,9 +806,9 @@ CONFIG_I2C_ALGOBIT=y CONFIG_I2C_AMD8111=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set CONFIG_I2C_KEYWEST=y -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set @@ -822,7 +835,9 @@ CONFIG_I2C_KEYWEST=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -833,9 +848,11 @@ CONFIG_I2C_KEYWEST=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set @@ -845,6 +862,7 @@ CONFIG_I2C_KEYWEST=y # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -877,6 +895,11 @@ CONFIG_I2C_KEYWEST=y # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set @@ -890,9 +913,8 @@ CONFIG_FB_OF=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set -CONFIG_FB_RIVA=y -CONFIG_FB_RIVA_I2C=y -# CONFIG_FB_RIVA_DEBUG is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set CONFIG_FB_MATROX=y CONFIG_FB_MATROX_MILLENIUM=y CONFIG_FB_MATROX_MYSTIQUE=y @@ -913,6 +935,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -946,6 +969,8 @@ CONFIG_LCD_DEVICE=y # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -956,8 +981,6 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers @@ -966,6 +989,8 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -981,12 +1006,11 @@ CONFIG_USB_OHCI_HCD=y # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_RW_DETECT=y # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set +# CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set @@ -1030,6 +1054,7 @@ CONFIG_USB_HIDDEV=y CONFIG_USB_PEGASUS=y # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +# CONFIG_USB_MON is not set # # USB port drivers @@ -1055,6 +1080,7 @@ CONFIG_USB_PEGASUS=y # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_TEST is not set # @@ -1276,10 +1302,13 @@ CONFIG_OPROFILE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set @@ -1311,6 +1340,7 @@ CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m diff --git a/arch/ppc64/kernel/entry.S b/arch/ppc64/kernel/entry.S index d3604056e1a9..b61572eb2a71 100644 --- a/arch/ppc64/kernel/entry.S +++ b/arch/ppc64/kernel/entry.S @@ -436,15 +436,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) REST_8GPRS(14, r1) REST_10GPRS(22, r1) -#ifdef CONFIG_PPC_ISERIES - clrrdi r7,r1,THREAD_SHIFT /* get current_thread_info() */ - ld r7,TI_FLAGS(r7) /* Get run light flag */ - mfspr r9,CTRLF - srdi r7,r7,TIF_RUN_LIGHT - insrdi r9,r7,1,63 /* Insert run light into CTRL */ - mtspr CTRLT,r9 -#endif - /* convert old thread to its task_struct for return value */ addi r3,r3,-THREAD ld r7,_NIP(r1) /* Return to _switch caller in new task */ diff --git a/arch/ppc64/kernel/head.S b/arch/ppc64/kernel/head.S index 92a744c31ab1..346dbf606b5d 100644 --- a/arch/ppc64/kernel/head.S +++ b/arch/ppc64/kernel/head.S @@ -626,10 +626,10 @@ system_reset_iSeries: lhz r24,PACAPACAINDEX(r13) /* Get processor # */ cmpwi 0,r24,0 /* Are we processor 0? */ beq .__start_initialization_iSeries /* Start up the first processor */ - mfspr r4,CTRLF - li r5,RUNLATCH /* Turn off the run light */ + mfspr r4,SPRN_CTRLF + li r5,CTRL_RUNLATCH /* Turn off the run light */ andc r4,r4,r5 - mtspr CTRLT,r4 + mtspr SPRN_CTRLT,r4 1: HMT_LOW @@ -2082,9 +2082,9 @@ _GLOBAL(hmt_start_secondary) mfspr r4, HID0 ori r4, r4, 0x1 mtspr HID0, r4 - mfspr r4, CTRLF + mfspr r4, SPRN_CTRLF oris r4, r4, 0x40 - mtspr CTRLT, r4 + mtspr SPRN_CTRLT, r4 blr #endif diff --git a/arch/ppc64/kernel/iSeries_setup.c b/arch/ppc64/kernel/iSeries_setup.c index da20120f2261..6d06eb550a3f 100644 --- a/arch/ppc64/kernel/iSeries_setup.c +++ b/arch/ppc64/kernel/iSeries_setup.c @@ -852,6 +852,28 @@ static int __init iSeries_src_init(void) late_initcall(iSeries_src_init); +static int set_spread_lpevents(char *str) +{ + unsigned long i; + unsigned long val = simple_strtoul(str, NULL, 0); + + /* + * The parameter is the number of processors to share in processing + * lp events. + */ + if (( val > 0) && (val <= NR_CPUS)) { + for (i = 1; i < val; ++i) + paca[i].lpqueue_ptr = paca[0].lpqueue_ptr; + + printk("lpevent processing spread over %ld processors\n", val); + } else { + printk("invalid spread_lpevents %ld\n", val); + } + + return 1; +} +__setup("spread_lpevents=", set_spread_lpevents); + void __init iSeries_early_setup(void) { iSeries_fixup_klimit(); diff --git a/arch/ppc64/kernel/idle.c b/arch/ppc64/kernel/idle.c index 6abc621d3ba0..f24ce2b87200 100644 --- a/arch/ppc64/kernel/idle.c +++ b/arch/ppc64/kernel/idle.c @@ -75,13 +75,9 @@ static int iSeries_idle(void) { struct paca_struct *lpaca; long oldval; - unsigned long CTRL; /* ensure iSeries run light will be out when idle */ - clear_thread_flag(TIF_RUN_LIGHT); - CTRL = mfspr(CTRLF); - CTRL &= ~RUNLATCH; - mtspr(CTRLT, CTRL); + ppc64_runlatch_off(); lpaca = get_paca(); @@ -111,7 +107,9 @@ static int iSeries_idle(void) } } + ppc64_runlatch_on(); schedule(); + ppc64_runlatch_off(); } return 0; diff --git a/arch/ppc64/kernel/kprobes.c b/arch/ppc64/kernel/kprobes.c index 103daaf73573..e950a2058a19 100644 --- a/arch/ppc64/kernel/kprobes.c +++ b/arch/ppc64/kernel/kprobes.c @@ -45,12 +45,17 @@ static struct pt_regs jprobe_saved_regs; int arch_prepare_kprobe(struct kprobe *p) { + int ret = 0; kprobe_opcode_t insn = *p->addr; - if (IS_MTMSRD(insn) || IS_RFID(insn)) - /* cannot put bp on RFID/MTMSRD */ - return 1; - return 0; + if ((unsigned long)p->addr & 0x03) { + printk("Attempt to register kprobe at an unaligned address\n"); + ret = -EINVAL; + } else if (IS_MTMSRD(insn) || IS_RFID(insn)) { + printk("Cannot register a kprobe on rfid or mtmsrd\n"); + ret = -EINVAL; + } + return ret; } void arch_copy_kprobe(struct kprobe *p) @@ -172,8 +177,6 @@ static void resume_execution(struct kprobe *p, struct pt_regs *regs) ret = emulate_step(regs, p->ainsn.insn[0]); if (ret == 0) regs->nip = (unsigned long)p->addr + 4; - - regs->msr &= ~MSR_SE; } static inline int post_kprobe_handler(struct pt_regs *regs) @@ -210,6 +213,7 @@ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) if (kprobe_status & KPROBE_HIT_SS) { resume_execution(current_kprobe, regs); + regs->msr &= ~MSR_SE; regs->msr |= kprobe_saved_msr; unlock_kprobes(); @@ -233,8 +237,6 @@ int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, */ preempt_disable(); switch (val) { - case DIE_IABR_MATCH: - case DIE_DABR_MATCH: case DIE_BPT: if (kprobe_handler(args->regs)) ret = NOTIFY_STOP; diff --git a/arch/ppc64/kernel/mf.c b/arch/ppc64/kernel/mf.c index 1bd52ece497c..5aca7e8005a8 100644 --- a/arch/ppc64/kernel/mf.c +++ b/arch/ppc64/kernel/mf.c @@ -1,7 +1,7 @@ /* * mf.c * Copyright (C) 2001 Troy D. Armstrong IBM Corporation - * Copyright (C) 2004 Stephen Rothwell IBM Corporation + * Copyright (C) 2004-2005 Stephen Rothwell IBM Corporation * * This modules exists as an interface between a Linux secondary partition * running on an iSeries and the primary partition's Virtual Service @@ -36,10 +36,12 @@ #include <asm/time.h> #include <asm/uaccess.h> +#include <asm/paca.h> #include <asm/iSeries/vio.h> #include <asm/iSeries/mf.h> #include <asm/iSeries/HvLpConfig.h> #include <asm/iSeries/ItSpCommArea.h> +#include <asm/iSeries/ItLpQueue.h> /* * This is the structure layout for the Machine Facilites LPAR event @@ -696,36 +698,23 @@ static void get_rtc_time_complete(void *token, struct ce_msg_data *ce_msg) complete(&rtc->com); } -int mf_get_rtc(struct rtc_time *tm) +static int rtc_set_tm(int rc, u8 *ce_msg, struct rtc_time *tm) { - struct ce_msg_comp_data ce_complete; - struct rtc_time_data rtc_data; - int rc; - - memset(&ce_complete, 0, sizeof(ce_complete)); - memset(&rtc_data, 0, sizeof(rtc_data)); - init_completion(&rtc_data.com); - ce_complete.handler = &get_rtc_time_complete; - ce_complete.token = &rtc_data; - rc = signal_ce_msg_simple(0x40, &ce_complete); - if (rc) - return rc; - wait_for_completion(&rtc_data.com); tm->tm_wday = 0; tm->tm_yday = 0; tm->tm_isdst = 0; - if (rtc_data.rc) { + if (rc) { tm->tm_sec = 0; tm->tm_min = 0; tm->tm_hour = 0; tm->tm_mday = 15; tm->tm_mon = 5; tm->tm_year = 52; - return rtc_data.rc; + return rc; } - if ((rtc_data.ce_msg.ce_msg[2] == 0xa9) || - (rtc_data.ce_msg.ce_msg[2] == 0xaf)) { + if ((ce_msg[2] == 0xa9) || + (ce_msg[2] == 0xaf)) { /* TOD clock is not set */ tm->tm_sec = 1; tm->tm_min = 1; @@ -736,7 +725,6 @@ int mf_get_rtc(struct rtc_time *tm) mf_set_rtc(tm); } { - u8 *ce_msg = rtc_data.ce_msg.ce_msg; u8 year = ce_msg[5]; u8 sec = ce_msg[6]; u8 min = ce_msg[7]; @@ -765,6 +753,63 @@ int mf_get_rtc(struct rtc_time *tm) return 0; } +int mf_get_rtc(struct rtc_time *tm) +{ + struct ce_msg_comp_data ce_complete; + struct rtc_time_data rtc_data; + int rc; + + memset(&ce_complete, 0, sizeof(ce_complete)); + memset(&rtc_data, 0, sizeof(rtc_data)); + init_completion(&rtc_data.com); + ce_complete.handler = &get_rtc_time_complete; + ce_complete.token = &rtc_data; + rc = signal_ce_msg_simple(0x40, &ce_complete); + if (rc) + return rc; + wait_for_completion(&rtc_data.com); + return rtc_set_tm(rtc_data.rc, rtc_data.ce_msg.ce_msg, tm); +} + +struct boot_rtc_time_data { + int busy; + struct ce_msg_data ce_msg; + int rc; +}; + +static void get_boot_rtc_time_complete(void *token, struct ce_msg_data *ce_msg) +{ + struct boot_rtc_time_data *rtc = token; + + memcpy(&rtc->ce_msg, ce_msg, sizeof(rtc->ce_msg)); + rtc->rc = 0; + rtc->busy = 0; +} + +int mf_get_boot_rtc(struct rtc_time *tm) +{ + struct ce_msg_comp_data ce_complete; + struct boot_rtc_time_data rtc_data; + int rc; + + memset(&ce_complete, 0, sizeof(ce_complete)); + memset(&rtc_data, 0, sizeof(rtc_data)); + rtc_data.busy = 1; + ce_complete.handler = &get_boot_rtc_time_complete; + ce_complete.token = &rtc_data; + rc = signal_ce_msg_simple(0x40, &ce_complete); + if (rc) + return rc; + /* We need to poll here as we are not yet taking interrupts */ + while (rtc_data.busy) { + extern unsigned long lpevent_count; + struct ItLpQueue *lpq = get_paca()->lpqueue_ptr; + if (lpq && ItLpQueue_isLpIntPending(lpq)) + lpevent_count += ItLpQueue_process(lpq, NULL); + } + return rtc_set_tm(rtc_data.rc, rtc_data.ce_msg.ce_msg, tm); +} + int mf_set_rtc(struct rtc_time *tm) { char ce_time[12]; diff --git a/arch/ppc64/kernel/misc.S b/arch/ppc64/kernel/misc.S index 90b41f48d21c..e3c73b3425dc 100644 --- a/arch/ppc64/kernel/misc.S +++ b/arch/ppc64/kernel/misc.S @@ -32,7 +32,7 @@ .text /* - * Returns (address we're running at) - (address we were linked at) + * Returns (address we were linked at) - (address we are running at) * for use before the text and data are mapped to KERNELBASE. */ @@ -792,7 +792,7 @@ _GLOBAL(sys_call_table32) .llong .compat_sys_newstat .llong .compat_sys_newlstat .llong .compat_sys_newfstat - .llong .sys_uname + .llong .sys32_uname .llong .sys_ni_syscall /* 110 old iopl syscall */ .llong .sys_vhangup .llong .sys_ni_syscall /* old idle syscall */ diff --git a/arch/ppc64/kernel/pSeries_reconfig.c b/arch/ppc64/kernel/pSeries_reconfig.c index cb5443f2e49b..dc2a69d412a2 100644 --- a/arch/ppc64/kernel/pSeries_reconfig.c +++ b/arch/ppc64/kernel/pSeries_reconfig.c @@ -47,14 +47,6 @@ static void remove_node_proc_entries(struct device_node *np) remove_proc_entry(pp->name, np->pde); pp = pp->next; } - - /* Assuming that symlinks have the same parent directory as - * np->pde. - */ - if (np->name_link) - remove_proc_entry(np->name_link->name, parent->pde); - if (np->addr_link) - remove_proc_entry(np->addr_link->name, parent->pde); if (np->pde) remove_proc_entry(np->pde->name, parent->pde); } diff --git a/arch/ppc64/kernel/pSeries_smp.c b/arch/ppc64/kernel/pSeries_smp.c index c60d8cb2b84d..fbad349ec58c 100644 --- a/arch/ppc64/kernel/pSeries_smp.c +++ b/arch/ppc64/kernel/pSeries_smp.c @@ -326,13 +326,6 @@ static void __devinit smp_xics_setup_cpu(int cpu) cpu_clear(cpu, of_spin_map); - /* - * Put the calling processor into the GIQ. This is really only - * necessary from a secondary thread as the OF start-cpu interface - * performs this function for us on primary threads. - */ - rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE, - (1UL << interrupt_server_size) - 1 - default_distrib_server, 1); } static DEFINE_SPINLOCK(timebase_lock); diff --git a/arch/ppc64/kernel/pci.c b/arch/ppc64/kernel/pci.c index be3cc387c1ec..d786d4b6af0b 100644 --- a/arch/ppc64/kernel/pci.c +++ b/arch/ppc64/kernel/pci.c @@ -438,7 +438,7 @@ pgprot_t pci_phys_mem_access_prot(struct file *file, int i; if (page_is_ram(offset >> PAGE_SHIFT)) - return prot; + return __pgprot(prot); prot |= _PAGE_NO_CACHE | _PAGE_GUARDED; diff --git a/arch/ppc64/kernel/pmac_smp.c b/arch/ppc64/kernel/pmac_smp.c index c27588ede2fe..a23de37227bf 100644 --- a/arch/ppc64/kernel/pmac_smp.c +++ b/arch/ppc64/kernel/pmac_smp.c @@ -68,6 +68,7 @@ extern struct smp_ops_t *smp_ops; static void (*pmac_tb_freeze)(int freeze); static struct device_node *pmac_tb_clock_chip_host; +static u8 pmac_tb_pulsar_addr; static DEFINE_SPINLOCK(timebase_lock); static unsigned long timebase; @@ -106,12 +107,9 @@ static void smp_core99_pulsar_tb_freeze(int freeze) u8 data; int rc; - /* Strangely, the device-tree says address is 0xd2, but darwin - * accesses 0xd0 ... - */ pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined); rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host, - 0xd4 | pmac_low_i2c_read, + pmac_tb_pulsar_addr | pmac_low_i2c_read, 0x2e, &data, 1); if (rc != 0) goto bail; @@ -120,7 +118,7 @@ static void smp_core99_pulsar_tb_freeze(int freeze) pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_stdsub); rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host, - 0xd4 | pmac_low_i2c_write, + pmac_tb_pulsar_addr | pmac_low_i2c_write, 0x2e, &data, 1); bail: if (rc != 0) { @@ -185,6 +183,12 @@ static int __init smp_core99_probe(void) if (ncpus <= 1) return 1; + /* HW sync only on these platforms */ + if (!machine_is_compatible("PowerMac7,2") && + !machine_is_compatible("PowerMac7,3") && + !machine_is_compatible("RackMac3,1")) + goto nohwsync; + /* Look for the clock chip */ for (cc = NULL; (cc = of_find_node_by_name(cc, "i2c-hwclock")) != NULL;) { struct device_node *p = of_get_parent(cc); @@ -198,11 +202,18 @@ static int __init smp_core99_probe(void) goto next; switch (*reg) { case 0xd2: - pmac_tb_freeze = smp_core99_cypress_tb_freeze; - printk(KERN_INFO "Timebase clock is Cypress chip\n"); + if (device_is_compatible(cc, "pulsar-legacy-slewing")) { + pmac_tb_freeze = smp_core99_pulsar_tb_freeze; + pmac_tb_pulsar_addr = 0xd2; + printk(KERN_INFO "Timebase clock is Pulsar chip\n"); + } else if (device_is_compatible(cc, "cy28508")) { + pmac_tb_freeze = smp_core99_cypress_tb_freeze; + printk(KERN_INFO "Timebase clock is Cypress chip\n"); + } break; case 0xd4: pmac_tb_freeze = smp_core99_pulsar_tb_freeze; + pmac_tb_pulsar_addr = 0xd4; printk(KERN_INFO "Timebase clock is Pulsar chip\n"); break; } @@ -210,12 +221,15 @@ static int __init smp_core99_probe(void) pmac_tb_clock_chip_host = p; smp_ops->give_timebase = smp_core99_give_timebase; smp_ops->take_timebase = smp_core99_take_timebase; + of_node_put(cc); + of_node_put(p); break; } next: of_node_put(p); } + nohwsync: mpic_request_ipis(); return ncpus; diff --git a/arch/ppc64/kernel/process.c b/arch/ppc64/kernel/process.c index 8b0686122738..cdfecbeb331f 100644 --- a/arch/ppc64/kernel/process.c +++ b/arch/ppc64/kernel/process.c @@ -378,9 +378,6 @@ copy_thread(int nr, unsigned long clone_flags, unsigned long usp, childregs->gpr[1] = sp + sizeof(struct pt_regs); p->thread.regs = NULL; /* no user register state */ clear_ti_thread_flag(p->thread_info, TIF_32BIT); -#ifdef CONFIG_PPC_ISERIES - set_ti_thread_flag(p->thread_info, TIF_RUN_LIGHT); -#endif } else { childregs->gpr[1] = usp; p->thread.regs = childregs; diff --git a/arch/ppc64/kernel/prom.c b/arch/ppc64/kernel/prom.c index fe2946c58314..eb6538b58008 100644 --- a/arch/ppc64/kernel/prom.c +++ b/arch/ppc64/kernel/prom.c @@ -834,7 +834,7 @@ void __init unflatten_device_tree(void) { unsigned long start, mem, size; struct device_node **allnextp = &allnodes; - char *p; + char *p = NULL; int l = 0; DBG(" -> unflatten_device_tree()\n"); diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c index 35ec42de962e..b7683abfbe6a 100644 --- a/arch/ppc64/kernel/prom_init.c +++ b/arch/ppc64/kernel/prom_init.c @@ -211,13 +211,23 @@ struct { */ #define ADDR(x) (u32) ((unsigned long)(x) - offset) +/* + * Error results ... some OF calls will return "-1" on error, some + * will return 0, some will return either. To simplify, here are + * macros to use with any ihandle or phandle return value to check if + * it is valid + */ + +#define PROM_ERROR (-1u) +#define PHANDLE_VALID(p) ((p) != 0 && (p) != PROM_ERROR) +#define IHANDLE_VALID(i) ((i) != 0 && (i) != PROM_ERROR) + + /* This is the one and *ONLY* place where we actually call open * firmware from, since we need to make sure we're running in 32b * mode when we do. We switch back to 64b mode upon return. */ -#define PROM_ERROR (-1) - static int __init call_prom(const char *service, int nargs, int nret, ...) { int i; @@ -587,14 +597,13 @@ static void __init prom_send_capabilities(void) { unsigned long offset = reloc_offset(); ihandle elfloader; - int ret; elfloader = call_prom("open", 1, 1, ADDR("/packages/elf-loader")); if (elfloader == 0) { prom_printf("couldn't open /packages/elf-loader\n"); return; } - ret = call_prom("call-method", 3, 1, ADDR("process-elf-header"), + call_prom("call-method", 3, 1, ADDR("process-elf-header"), elfloader, ADDR(&fake_elf)); call_prom("close", 1, 0, elfloader); } @@ -646,7 +655,7 @@ static unsigned long __init alloc_up(unsigned long size, unsigned long align) base = _ALIGN_UP(base + 0x100000, align)) { prom_debug(" trying: 0x%x\n\r", base); addr = (unsigned long)prom_claim(base, size, 0); - if ((int)addr != PROM_ERROR) + if (addr != PROM_ERROR) break; addr = 0; if (align == 0) @@ -708,7 +717,7 @@ static unsigned long __init alloc_down(unsigned long size, unsigned long align, for(; base > RELOC(alloc_bottom); base = _ALIGN_DOWN(base - 0x100000, align)) { prom_debug(" trying: 0x%x\n\r", base); addr = (unsigned long)prom_claim(base, size, 0); - if ((int)addr != PROM_ERROR) + if (addr != PROM_ERROR) break; addr = 0; } @@ -902,18 +911,19 @@ static void __init prom_instantiate_rtas(void) { unsigned long offset = reloc_offset(); struct prom_t *_prom = PTRRELOC(&prom); - phandle prom_rtas, rtas_node; + phandle rtas_node; + ihandle rtas_inst; u32 base, entry = 0; u32 size = 0; prom_debug("prom_instantiate_rtas: start...\n"); - prom_rtas = call_prom("finddevice", 1, 1, ADDR("/rtas")); - prom_debug("prom_rtas: %x\n", prom_rtas); - if (prom_rtas == (phandle) -1) + rtas_node = call_prom("finddevice", 1, 1, ADDR("/rtas")); + prom_debug("rtas_node: %x\n", rtas_node); + if (!PHANDLE_VALID(rtas_node)) return; - prom_getprop(prom_rtas, "rtas-size", &size, sizeof(size)); + prom_getprop(rtas_node, "rtas-size", &size, sizeof(size)); if (size == 0) return; @@ -922,14 +932,18 @@ static void __init prom_instantiate_rtas(void) prom_printf("RTAS allocation failed !\n"); return; } - prom_printf("instantiating rtas at 0x%x", base); - rtas_node = call_prom("open", 1, 1, ADDR("/rtas")); - prom_printf("..."); + rtas_inst = call_prom("open", 1, 1, ADDR("/rtas")); + if (!IHANDLE_VALID(rtas_inst)) { + prom_printf("opening rtas package failed"); + return; + } + + prom_printf("instantiating rtas at 0x%x ...", base); if (call_prom("call-method", 3, 2, ADDR("instantiate-rtas"), - rtas_node, base) != PROM_ERROR) { + rtas_inst, base) != PROM_ERROR) { entry = (long)_prom->args.rets[1]; } if (entry == 0) { @@ -940,8 +954,8 @@ static void __init prom_instantiate_rtas(void) reserve_mem(base, size); - prom_setprop(prom_rtas, "linux,rtas-base", &base, sizeof(base)); - prom_setprop(prom_rtas, "linux,rtas-entry", &entry, sizeof(entry)); + prom_setprop(rtas_node, "linux,rtas-base", &base, sizeof(base)); + prom_setprop(rtas_node, "linux,rtas-entry", &entry, sizeof(entry)); prom_debug("rtas base = 0x%x\n", base); prom_debug("rtas entry = 0x%x\n", entry); @@ -1062,7 +1076,7 @@ static void __init prom_initialize_tce_table(void) prom_printf("opening PHB %s", path); phb_node = call_prom("open", 1, 1, path); - if ( (long)phb_node <= 0) + if (phb_node == 0) prom_printf("... failed\n"); else prom_printf("... done\n"); @@ -1279,12 +1293,12 @@ static void __init prom_init_client_services(unsigned long pp) /* get a handle for the stdout device */ _prom->chosen = call_prom("finddevice", 1, 1, ADDR("/chosen")); - if ((long)_prom->chosen <= 0) + if (!PHANDLE_VALID(_prom->chosen)) prom_panic("cannot find chosen"); /* msg won't be printed :( */ /* get device tree root */ _prom->root = call_prom("finddevice", 1, 1, ADDR("/")); - if ((long)_prom->root <= 0) + if (!PHANDLE_VALID(_prom->root)) prom_panic("cannot find device tree root"); /* msg won't be printed :( */ } @@ -1356,9 +1370,8 @@ static int __init prom_find_machine_type(void) } /* Default to pSeries. We need to know if we are running LPAR */ rtas = call_prom("finddevice", 1, 1, ADDR("/rtas")); - if (rtas != (phandle) -1) { - unsigned long x; - x = prom_getproplen(rtas, "ibm,hypertas-functions"); + if (PHANDLE_VALID(rtas)) { + int x = prom_getproplen(rtas, "ibm,hypertas-functions"); if (x != PROM_ERROR) { prom_printf("Hypertas detected, assuming LPAR !\n"); return PLATFORM_PSERIES_LPAR; @@ -1426,12 +1439,13 @@ static void __init prom_check_displays(void) * leave some room at the end of the path for appending extra * arguments */ - if (call_prom("package-to-path", 3, 1, node, path, PROM_SCRATCH_SIZE-10) < 0) + if (call_prom("package-to-path", 3, 1, node, path, + PROM_SCRATCH_SIZE-10) == PROM_ERROR) continue; prom_printf("found display : %s, opening ... ", path); ih = call_prom("open", 1, 1, path); - if (ih == (ihandle)0 || ih == (ihandle)-1) { + if (ih == 0) { prom_printf("failed\n"); continue; } @@ -1514,6 +1528,12 @@ static unsigned long __init dt_find_string(char *str) return 0; } +/* + * The Open Firmware 1275 specification states properties must be 31 bytes or + * less, however not all firmwares obey this. Make it 64 bytes to be safe. + */ +#define MAX_PROPERTY_NAME 64 + static void __init scan_dt_build_strings(phandle node, unsigned long *mem_start, unsigned long *mem_end) { @@ -1527,10 +1547,12 @@ static void __init scan_dt_build_strings(phandle node, unsigned long *mem_start, /* get and store all property names */ prev_name = RELOC(""); for (;;) { - - /* 32 is max len of name including nul. */ - namep = make_room(mem_start, mem_end, 32, 1); - if (call_prom("nextprop", 3, 1, node, prev_name, namep) <= 0) { + int rc; + + /* 64 is max len of name including nul. */ + namep = make_room(mem_start, mem_end, MAX_PROPERTY_NAME, 1); + rc = call_prom("nextprop", 3, 1, node, prev_name, namep); + if (rc != 1) { /* No more nodes: unwind alloc */ *mem_start = (unsigned long)namep; break; @@ -1555,18 +1577,12 @@ static void __init scan_dt_build_strings(phandle node, unsigned long *mem_start, } } -/* - * The Open Firmware 1275 specification states properties must be 31 bytes or - * less, however not all firmwares obey this. Make it 64 bytes to be safe. - */ -#define MAX_PROPERTY_NAME 64 - static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, unsigned long *mem_end) { int l, align; phandle child; - char *namep, *prev_name, *sstart; + char *namep, *prev_name, *sstart, *p, *ep; unsigned long soff; unsigned char *valp; unsigned long offset = reloc_offset(); @@ -1588,6 +1604,14 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, call_prom("package-to-path", 3, 1, node, namep, l); } namep[l] = '\0'; + /* Fixup an Apple bug where they have bogus \0 chars in the + * middle of the path in some properties + */ + for (p = namep, ep = namep + l; p < ep; p++) + if (*p == '\0') { + memmove(p, p+1, ep - p); + ep--; l--; + } *mem_start = _ALIGN(((unsigned long) namep) + strlen(namep) + 1, 4); } @@ -1599,7 +1623,10 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, prev_name = RELOC(""); sstart = (char *)RELOC(dt_string_start); for (;;) { - if (call_prom("nextprop", 3, 1, node, prev_name, pname) <= 0) + int rc; + + rc = call_prom("nextprop", 3, 1, node, prev_name, pname); + if (rc != 1) break; /* find string offset */ @@ -1615,7 +1642,7 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, l = call_prom("getproplen", 2, 1, node, pname); /* sanity checks */ - if (l < 0) + if (l == PROM_ERROR) continue; if (l > MAX_PROPERTY_LENGTH) { prom_printf("WARNING: ignoring large property "); @@ -1750,7 +1777,45 @@ static void __init flatten_device_tree(void) prom_printf("Device tree struct 0x%x -> 0x%x\n", RELOC(dt_struct_start), RELOC(dt_struct_end)); - } +} + + +static void __init fixup_device_tree(void) +{ + unsigned long offset = reloc_offset(); + phandle u3, i2c, mpic; + u32 u3_rev; + u32 interrupts[2]; + u32 parent; + + /* Some G5s have a missing interrupt definition, fix it up here */ + u3 = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000")); + if (!PHANDLE_VALID(u3)) + return; + i2c = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/i2c@f8001000")); + if (!PHANDLE_VALID(i2c)) + return; + mpic = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/mpic@f8040000")); + if (!PHANDLE_VALID(mpic)) + return; + + /* check if proper rev of u3 */ + if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev)) + == PROM_ERROR) + return; + if (u3_rev != 0x35) + return; + /* does it need fixup ? */ + if (prom_getproplen(i2c, "interrupts") > 0) + return; + /* interrupt on this revision of u3 is number 0 and level */ + interrupts[0] = 0; + interrupts[1] = 1; + prom_setprop(i2c, "interrupts", &interrupts, sizeof(interrupts)); + parent = (u32)mpic; + prom_setprop(i2c, "interrupt-parent", &parent, sizeof(parent)); +} + static void __init prom_find_boot_cpu(void) { @@ -1844,6 +1909,12 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long &getprop_rval, sizeof(getprop_rval)); /* + * On pSeries, inform the firmware about our capabilities + */ + if (RELOC(of_platform) & PLATFORM_PSERIES) + prom_send_capabilities(); + + /* * On pSeries, copy the CPU hold code */ if (RELOC(of_platform) & PLATFORM_PSERIES) @@ -1920,6 +1991,11 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long } /* + * Fixup any known bugs in the device-tree + */ + fixup_device_tree(); + + /* * Now finally create the flattened device-tree */ prom_printf("copying OF device tree ...\n"); diff --git a/arch/ppc64/kernel/ptrace.c b/arch/ppc64/kernel/ptrace.c index 5a846324ca8c..9f8c6087ae56 100644 --- a/arch/ppc64/kernel/ptrace.c +++ b/arch/ppc64/kernel/ptrace.c @@ -305,14 +305,17 @@ static void do_syscall_trace(void) void do_syscall_trace_enter(struct pt_regs *regs) { + if (test_thread_flag(TIF_SYSCALL_TRACE) + && (current->ptrace & PT_PTRACED)) + do_syscall_trace(); + if (unlikely(current->audit_context)) - audit_syscall_entry(current, regs->gpr[0], + audit_syscall_entry(current, + test_thread_flag(TIF_32BIT)?AUDIT_ARCH_PPC:AUDIT_ARCH_PPC64, + regs->gpr[0], regs->gpr[3], regs->gpr[4], regs->gpr[5], regs->gpr[6]); - if (test_thread_flag(TIF_SYSCALL_TRACE) - && (current->ptrace & PT_PTRACED)) - do_syscall_trace(); } void do_syscall_trace_leave(struct pt_regs *regs) @@ -320,7 +323,9 @@ void do_syscall_trace_leave(struct pt_regs *regs) secure_computing(regs->gpr[0]); if (unlikely(current->audit_context)) - audit_syscall_exit(current, regs->result); + audit_syscall_exit(current, + (regs->ccr&0x1000)?AUDITSC_FAILURE:AUDITSC_SUCCESS, + regs->result); if ((test_thread_flag(TIF_SYSCALL_TRACE) || test_thread_flag(TIF_SINGLESTEP)) diff --git a/arch/ppc64/kernel/rtc.c b/arch/ppc64/kernel/rtc.c index 3e70b91375fc..67989055a9fe 100644 --- a/arch/ppc64/kernel/rtc.c +++ b/arch/ppc64/kernel/rtc.c @@ -292,47 +292,10 @@ int iSeries_set_rtc_time(struct rtc_time *tm) void iSeries_get_boot_time(struct rtc_time *tm) { - unsigned long time; - static unsigned long lastsec = 1; - - u32 dataWord1 = *((u32 *)(&xSpCommArea.xBcdTimeAtIplStart)); - u32 dataWord2 = *(((u32 *)&(xSpCommArea.xBcdTimeAtIplStart)) + 1); - int year = 1970; - int year1 = ( dataWord1 >> 24 ) & 0x000000FF; - int year2 = ( dataWord1 >> 16 ) & 0x000000FF; - int sec = ( dataWord1 >> 8 ) & 0x000000FF; - int min = dataWord1 & 0x000000FF; - int hour = ( dataWord2 >> 24 ) & 0x000000FF; - int day = ( dataWord2 >> 8 ) & 0x000000FF; - int mon = dataWord2 & 0x000000FF; - if ( piranha_simulator ) return; - BCD_TO_BIN(sec); - BCD_TO_BIN(min); - BCD_TO_BIN(hour); - BCD_TO_BIN(day); - BCD_TO_BIN(mon); - BCD_TO_BIN(year1); - BCD_TO_BIN(year2); - year = year1 * 100 + year2; - - time = mktime(year, mon, day, hour, min, sec); - time += ( jiffies / HZ ); - - /* Now THIS is a nasty hack! - * It ensures that the first two calls get different answers. - * That way the loop in init_time (time.c) will not think - * the clock is stuck. - */ - if ( lastsec ) { - time -= lastsec; - --lastsec; - } - - to_tm(time, tm); - tm->tm_year -= 1900; + mf_get_boot_rtc(tm); tm->tm_mon -= 1; } #endif diff --git a/arch/ppc64/kernel/setup.c b/arch/ppc64/kernel/setup.c index 21c57f539c29..dce198d39328 100644 --- a/arch/ppc64/kernel/setup.c +++ b/arch/ppc64/kernel/setup.c @@ -103,11 +103,6 @@ extern void unflatten_device_tree(void); extern void smp_release_cpus(void); -unsigned long decr_overclock = 1; -unsigned long decr_overclock_proc0 = 1; -unsigned long decr_overclock_set = 0; -unsigned long decr_overclock_proc0_set = 0; - int have_of = 1; int boot_cpuid = 0; int boot_cpuid_phys = 0; @@ -1120,64 +1115,15 @@ void ppc64_dump_msg(unsigned int src, const char *msg) printk("[dump]%04x %s\n", src, msg); } -int set_spread_lpevents( char * str ) -{ - /* The parameter is the number of processors to share in processing lp events */ - unsigned long i; - unsigned long val = simple_strtoul( str, NULL, 0 ); - if ( ( val > 0 ) && ( val <= NR_CPUS ) ) { - for ( i=1; i<val; ++i ) - paca[i].lpqueue_ptr = paca[0].lpqueue_ptr; - printk("lpevent processing spread over %ld processors\n", val); - } - else - printk("invalid spreaqd_lpevents %ld\n", val); - return 1; -} - /* This should only be called on processor 0 during calibrate decr */ void setup_default_decr(void) { struct paca_struct *lpaca = get_paca(); - if ( decr_overclock_set && !decr_overclock_proc0_set ) - decr_overclock_proc0 = decr_overclock; - - lpaca->default_decr = tb_ticks_per_jiffy / decr_overclock_proc0; + lpaca->default_decr = tb_ticks_per_jiffy; lpaca->next_jiffy_update_tb = get_tb() + tb_ticks_per_jiffy; } -int set_decr_overclock_proc0( char * str ) -{ - unsigned long val = simple_strtoul( str, NULL, 0 ); - if ( ( val >= 1 ) && ( val <= 48 ) ) { - decr_overclock_proc0_set = 1; - decr_overclock_proc0 = val; - printk("proc 0 decrementer overclock factor of %ld\n", val); - } - else - printk("invalid proc 0 decrementer overclock factor of %ld\n", val); - return 1; -} - -int set_decr_overclock( char * str ) -{ - unsigned long val = simple_strtoul( str, NULL, 0 ); - if ( ( val >= 1 ) && ( val <= 48 ) ) { - decr_overclock_set = 1; - decr_overclock = val; - printk("decrementer overclock factor of %ld\n", val); - } - else - printk("invalid decrementer overclock factor of %ld\n", val); - return 1; - -} - -__setup("spread_lpevents=", set_spread_lpevents ); -__setup("decr_overclock_proc0=", set_decr_overclock_proc0 ); -__setup("decr_overclock=", set_decr_overclock ); - #ifndef CONFIG_PPC_ISERIES /* * This function can be used by platforms to "find" legacy serial ports. diff --git a/arch/ppc64/kernel/signal.c b/arch/ppc64/kernel/signal.c index a95a2b49a1d5..bf782276984c 100644 --- a/arch/ppc64/kernel/signal.c +++ b/arch/ppc64/kernel/signal.c @@ -42,11 +42,7 @@ #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) -#ifndef MIN -#define MIN(a,b) (((a) < (b)) ? (a) : (b)) -#endif - -#define GP_REGS_SIZE MIN(sizeof(elf_gregset_t), sizeof(struct pt_regs)) +#define GP_REGS_SIZE min(sizeof(elf_gregset_t), sizeof(struct pt_regs)) #define FP_REGS_SIZE sizeof(elf_fpregset_t) #define TRAMP_TRACEBACK 3 diff --git a/arch/ppc64/kernel/smp.c b/arch/ppc64/kernel/smp.c index 3b906cd94037..9ef5d36d6b25 100644 --- a/arch/ppc64/kernel/smp.c +++ b/arch/ppc64/kernel/smp.c @@ -334,7 +334,6 @@ void smp_call_function_interrupt(void) } } -extern unsigned long decr_overclock; extern struct gettimeofday_struct do_gtod; struct thread_info *current_set[NR_CPUS]; @@ -491,7 +490,7 @@ int __devinit __cpu_up(unsigned int cpu) if (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu)) return -EINVAL; - paca[cpu].default_decr = tb_ticks_per_jiffy / decr_overclock; + paca[cpu].default_decr = tb_ticks_per_jiffy; if (!cpu_has_feature(CPU_FTR_SLB)) { void *tmp; diff --git a/arch/ppc64/kernel/sys_ppc32.c b/arch/ppc64/kernel/sys_ppc32.c index 7cf7a9600025..9c8e317c598d 100644 --- a/arch/ppc64/kernel/sys_ppc32.c +++ b/arch/ppc64/kernel/sys_ppc32.c @@ -791,31 +791,6 @@ asmlinkage int sys32_pciconfig_iobase(u32 which, u32 in_bus, u32 in_devfn) } -asmlinkage int ppc64_newuname(struct new_utsname __user * name) -{ - int errno = sys_newuname(name); - - if (current->personality == PER_LINUX32 && !errno) { - if(copy_to_user(name->machine, "ppc\0\0", 8)) { - errno = -EFAULT; - } - } - return errno; -} - -asmlinkage int ppc64_personality(unsigned long personality) -{ - int ret; - if (current->personality == PER_LINUX32 && personality == PER_LINUX) - personality = PER_LINUX32; - ret = sys_personality(personality); - if (ret == PER_LINUX32) - ret = PER_LINUX; - return ret; -} - - - /* Note: it is necessary to treat mode as an unsigned int, * with the corresponding cast to a signed int to insure that the * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode) @@ -1158,26 +1133,47 @@ asmlinkage long sys32_sysctl(struct __sysctl_args32 __user *args) } #endif +asmlinkage int sys32_uname(struct old_utsname __user * name) +{ + int err = 0; + + down_read(&uts_sem); + if (copy_to_user(name, &system_utsname, sizeof(*name))) + err = -EFAULT; + up_read(&uts_sem); + if (!err && personality(current->personality) == PER_LINUX32) { + /* change "ppc64" to "ppc" */ + if (__put_user(0, name->machine + 3) + || __put_user(0, name->machine + 4)) + err = -EFAULT; + } + return err; +} + asmlinkage int sys32_olduname(struct oldold_utsname __user * name) { int error; - - if (!name) - return -EFAULT; + if (!access_ok(VERIFY_WRITE,name,sizeof(struct oldold_utsname))) return -EFAULT; down_read(&uts_sem); error = __copy_to_user(&name->sysname,&system_utsname.sysname,__OLD_UTS_LEN); - error -= __put_user(0,name->sysname+__OLD_UTS_LEN); - error -= __copy_to_user(&name->nodename,&system_utsname.nodename,__OLD_UTS_LEN); - error -= __put_user(0,name->nodename+__OLD_UTS_LEN); - error -= __copy_to_user(&name->release,&system_utsname.release,__OLD_UTS_LEN); - error -= __put_user(0,name->release+__OLD_UTS_LEN); - error -= __copy_to_user(&name->version,&system_utsname.version,__OLD_UTS_LEN); - error -= __put_user(0,name->version+__OLD_UTS_LEN); - error -= __copy_to_user(&name->machine,&system_utsname.machine,__OLD_UTS_LEN); - error = __put_user(0,name->machine+__OLD_UTS_LEN); + error |= __put_user(0,name->sysname+__OLD_UTS_LEN); + error |= __copy_to_user(&name->nodename,&system_utsname.nodename,__OLD_UTS_LEN); + error |= __put_user(0,name->nodename+__OLD_UTS_LEN); + error |= __copy_to_user(&name->release,&system_utsname.release,__OLD_UTS_LEN); + error |= __put_user(0,name->release+__OLD_UTS_LEN); + error |= __copy_to_user(&name->version,&system_utsname.version,__OLD_UTS_LEN); + error |= __put_user(0,name->version+__OLD_UTS_LEN); + error |= __copy_to_user(&name->machine,&system_utsname.machine,__OLD_UTS_LEN); + error |= __put_user(0,name->machine+__OLD_UTS_LEN); + if (personality(current->personality) == PER_LINUX32) { + /* change "ppc64" to "ppc" */ + error |= __put_user(0, name->machine + 3); + error |= __put_user(0, name->machine + 4); + } + up_read(&uts_sem); error = error ? -EFAULT : 0; diff --git a/arch/ppc64/kernel/syscalls.c b/arch/ppc64/kernel/syscalls.c index f2865ff8d2f9..a8cbb202b8cd 100644 --- a/arch/ppc64/kernel/syscalls.c +++ b/arch/ppc64/kernel/syscalls.c @@ -199,24 +199,33 @@ out: return ret; } -static int __init set_fakeppc(char *str) +long ppc64_personality(unsigned long personality) { - if (*str) - return 0; - init_task.personality = PER_LINUX32; - return 1; + long ret; + + if (personality(current->personality) == PER_LINUX32 + && personality == PER_LINUX) + personality = PER_LINUX32; + ret = sys_personality(personality); + if (ret == PER_LINUX32) + ret = PER_LINUX; + return ret; } -__setup("fakeppc", set_fakeppc); -asmlinkage int sys_uname(struct old_utsname __user * name) +long ppc64_newuname(struct new_utsname __user * name) { - int err = -EFAULT; - + int err = 0; + down_read(&uts_sem); - if (name && !copy_to_user(name, &system_utsname, sizeof (*name))) - err = 0; + if (copy_to_user(name, &system_utsname, sizeof(*name))) + err = -EFAULT; up_read(&uts_sem); - + if (!err && personality(current->personality) == PER_LINUX32) { + /* change ppc64 to ppc */ + if (__put_user(0, name->machine + 3) + || __put_user(0, name->machine + 4)) + err = -EFAULT; + } return err; } diff --git a/arch/ppc64/kernel/sysfs.c b/arch/ppc64/kernel/sysfs.c index 0925694c3ce5..c8fa6569b2fd 100644 --- a/arch/ppc64/kernel/sysfs.c +++ b/arch/ppc64/kernel/sysfs.c @@ -113,7 +113,6 @@ void ppc64_enable_pmcs(void) #ifdef CONFIG_PPC_PSERIES unsigned long set, reset; int ret; - unsigned int ctrl; #endif /* CONFIG_PPC_PSERIES */ /* Only need to enable them once */ @@ -167,11 +166,8 @@ void ppc64_enable_pmcs(void) * On SMT machines we have to set the run latch in the ctrl register * in order to make PMC6 spin. */ - if (cpu_has_feature(CPU_FTR_SMT)) { - ctrl = mfspr(CTRLF); - ctrl |= RUNLATCH; - mtspr(CTRLT, ctrl); - } + if (cpu_has_feature(CPU_FTR_SMT)) + ppc64_runlatch_on(); #endif /* CONFIG_PPC_PSERIES */ } diff --git a/arch/ppc64/kernel/time.c b/arch/ppc64/kernel/time.c index 772a465b49f9..33364a7d2cd2 100644 --- a/arch/ppc64/kernel/time.c +++ b/arch/ppc64/kernel/time.c @@ -325,9 +325,7 @@ int timer_interrupt(struct pt_regs * regs) irq_enter(); -#ifndef CONFIG_PPC_ISERIES profile_tick(CPU_PROFILING, regs); -#endif lpaca->lppaca.int_dword.fields.decr_int = 0; @@ -515,6 +513,7 @@ void __init time_init(void) do_gtod.varp = &do_gtod.vars[0]; do_gtod.var_idx = 0; do_gtod.varp->tb_orig_stamp = tb_last_stamp; + get_paca()->next_jiffy_update_tb = tb_last_stamp + tb_ticks_per_jiffy; do_gtod.varp->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC; do_gtod.tb_ticks_per_sec = tb_ticks_per_sec; do_gtod.varp->tb_to_xs = tb_to_xs; diff --git a/arch/ppc64/kernel/xics.c b/arch/ppc64/kernel/xics.c index eedd1d3c2a10..879f39b90a33 100644 --- a/arch/ppc64/kernel/xics.c +++ b/arch/ppc64/kernel/xics.c @@ -432,6 +432,7 @@ void xics_cause_IPI(int cpu) { ops->qirr_info(cpu, IPI_PRIORITY); } +#endif /* CONFIG_SMP */ void xics_setup_cpu(void) { @@ -439,9 +440,17 @@ void xics_setup_cpu(void) ops->cppr_info(cpu, 0xff); iosync(); -} -#endif /* CONFIG_SMP */ + /* + * Put the calling processor into the GIQ. This is really only + * necessary from a secondary thread as the OF start-cpu interface + * performs this function for us on primary threads. + * + * XXX: undo of teardown on kexec needs this too, as may hotplug + */ + rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE, + (1UL << interrupt_server_size) - 1 - default_distrib_server, 1); +} void xics_init_IRQ(void) { @@ -563,8 +572,7 @@ nextnode: for (; i < NR_IRQS; ++i) get_irq_desc(i)->handler = &xics_pic; - ops->cppr_info(boot_cpuid, 0xff); - iosync(); + xics_setup_cpu(); ppc64_boot_msg(0x21, "XICS Done"); } diff --git a/arch/ppc64/mm/hash_native.c b/arch/ppc64/mm/hash_native.c index 144657e0c3d5..52b6b9305341 100644 --- a/arch/ppc64/mm/hash_native.c +++ b/arch/ppc64/mm/hash_native.c @@ -320,8 +320,7 @@ static void native_flush_hash_range(unsigned long context, j = 0; for (i = 0; i < number; i++) { - if ((batch->addr[i] >= USER_START) && - (batch->addr[i] <= USER_END)) + if (batch->addr[i] < KERNELBASE) vsid = get_vsid(context, batch->addr[i]); else vsid = get_kernel_vsid(batch->addr[i]); diff --git a/arch/ppc64/mm/hash_utils.c b/arch/ppc64/mm/hash_utils.c index e48be12f518c..0a0f97008d02 100644 --- a/arch/ppc64/mm/hash_utils.c +++ b/arch/ppc64/mm/hash_utils.c @@ -298,24 +298,23 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) int local = 0; cpumask_t tmp; + if ((ea & ~REGION_MASK) > EADDR_MASK) + return 1; + switch (REGION_ID(ea)) { case USER_REGION_ID: user_region = 1; mm = current->mm; - if ((ea > USER_END) || (! mm)) + if (! mm) return 1; vsid = get_vsid(mm->context.id, ea); break; case IO_REGION_ID: - if (ea > IMALLOC_END) - return 1; mm = &ioremap_mm; vsid = get_kernel_vsid(ea); break; case VMALLOC_REGION_ID: - if (ea > VMALLOC_END) - return 1; mm = &init_mm; vsid = get_kernel_vsid(ea); break; @@ -362,7 +361,7 @@ void flush_hash_page(unsigned long context, unsigned long ea, pte_t pte, unsigned long vsid, vpn, va, hash, secondary, slot; unsigned long huge = pte_huge(pte); - if ((ea >= USER_START) && (ea <= USER_END)) + if (ea < KERNELBASE) vsid = get_vsid(context, ea); else vsid = get_kernel_vsid(ea); diff --git a/arch/ppc64/mm/imalloc.c b/arch/ppc64/mm/imalloc.c index 9d92b0d9cde5..cb8727f3267a 100644 --- a/arch/ppc64/mm/imalloc.c +++ b/arch/ppc64/mm/imalloc.c @@ -14,6 +14,7 @@ #include <asm/pgalloc.h> #include <asm/pgtable.h> #include <asm/semaphore.h> +#include <asm/imalloc.h> static DECLARE_MUTEX(imlist_sem); struct vm_struct * imlist = NULL; @@ -23,11 +24,11 @@ static int get_free_im_addr(unsigned long size, unsigned long *im_addr) unsigned long addr; struct vm_struct **p, *tmp; - addr = IMALLOC_START; + addr = ioremap_bot; for (p = &imlist; (tmp = *p) ; p = &tmp->next) { if (size + addr < (unsigned long) tmp->addr) break; - if ((unsigned long)tmp->addr >= IMALLOC_START) + if ((unsigned long)tmp->addr >= ioremap_bot) addr = tmp->size + (unsigned long) tmp->addr; if (addr > IMALLOC_END-size) return 1; diff --git a/arch/ppc64/mm/init.c b/arch/ppc64/mm/init.c index cf33d7ec2e29..4b42aff74d73 100644 --- a/arch/ppc64/mm/init.c +++ b/arch/ppc64/mm/init.c @@ -64,6 +64,7 @@ #include <asm/iommu.h> #include <asm/abs_addr.h> #include <asm/vdso.h> +#include <asm/imalloc.h> int mem_init_done; unsigned long ioremap_bot = IMALLOC_BASE; @@ -668,7 +669,7 @@ void __init paging_init(void) zones_size[ZONE_DMA] = top_of_ram >> PAGE_SHIFT; zholes_size[ZONE_DMA] = (top_of_ram - total_ram) >> PAGE_SHIFT; - free_area_init_node(0, &contig_page_data, zones_size, + free_area_init_node(0, NODE_DATA(0), zones_size, __pa(PAGE_OFFSET) >> PAGE_SHIFT, zholes_size); } #endif /* CONFIG_DISCONTIGMEM */ diff --git a/arch/ppc64/mm/stab.c b/arch/ppc64/mm/stab.c index 31491131d5e4..df4bbe14153c 100644 --- a/arch/ppc64/mm/stab.c +++ b/arch/ppc64/mm/stab.c @@ -19,6 +19,11 @@ #include <asm/paca.h> #include <asm/cputable.h> +struct stab_entry { + unsigned long esid_data; + unsigned long vsid_data; +}; + /* Both the segment table and SLB code uses the following cache */ #define NR_STAB_CACHE_ENTRIES 8 DEFINE_PER_CPU(long, stab_cache_ptr); |