diff options
Diffstat (limited to 'arch/sh/boards/mach-se')
28 files changed, 2412 insertions, 0 deletions
diff --git a/arch/sh/boards/mach-se/7206/Makefile b/arch/sh/boards/mach-se/7206/Makefile new file mode 100644 index 000000000000..63e7ed699f39 --- /dev/null +++ b/arch/sh/boards/mach-se/7206/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the 7206 SolutionEngine specific parts of the kernel +# + +obj-y := setup.o io.o irq.o diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c new file mode 100644 index 000000000000..1308e618e044 --- /dev/null +++ b/arch/sh/boards/mach-se/7206/io.c @@ -0,0 +1,104 @@ +/* $Id: io.c,v 1.5 2004/02/22 23:08:43 kkojima Exp $ + * + * linux/arch/sh/boards/se/7206/io.c + * + * Copyright (C) 2006 Yoshinori Sato + * + * I/O routine for Hitachi 7206 SolutionEngine. + * + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <asm/io.h> +#include <asm/se7206.h> + + +static inline void delay(void) +{ + ctrl_inw(0x20000000); /* P2 ROM Area */ +} + +/* MS7750 requires special versions of in*, out* routines, since + PC-like io ports are located at upper half byte of 16-bit word which + can be accessed only with 16-bit wide. */ + +static inline volatile __u16 * +port2adr(unsigned int port) +{ + if (port >= 0x2000 && port < 0x2020) + return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); + else if (port >= 0x300 && port < 0x310) + return (volatile __u16 *) (PA_SMSC + (port - 0x300)); + + return (volatile __u16 *)port; +} + +unsigned char se7206_inb(unsigned long port) +{ + return (*port2adr(port)) & 0xff; +} + +unsigned char se7206_inb_p(unsigned long port) +{ + unsigned long v; + + v = (*port2adr(port)) & 0xff; + delay(); + return v; +} + +unsigned short se7206_inw(unsigned long port) +{ + return *port2adr(port);; +} + +void se7206_outb(unsigned char value, unsigned long port) +{ + *(port2adr(port)) = value; +} + +void se7206_outb_p(unsigned char value, unsigned long port) +{ + *(port2adr(port)) = value; + delay(); +} + +void se7206_outw(unsigned short value, unsigned long port) +{ + *port2adr(port) = value; +} + +void se7206_insb(unsigned long port, void *addr, unsigned long count) +{ + volatile __u16 *p = port2adr(port); + __u8 *ap = addr; + + while (count--) + *ap++ = *p; +} + +void se7206_insw(unsigned long port, void *addr, unsigned long count) +{ + volatile __u16 *p = port2adr(port); + __u16 *ap = addr; + while (count--) + *ap++ = *p; +} + +void se7206_outsb(unsigned long port, const void *addr, unsigned long count) +{ + volatile __u16 *p = port2adr(port); + const __u8 *ap = addr; + + while (count--) + *p = *ap++; +} + +void se7206_outsw(unsigned long port, const void *addr, unsigned long count) +{ + volatile __u16 *p = port2adr(port); + const __u16 *ap = addr; + while (count--) + *p = *ap++; +} diff --git a/arch/sh/boards/mach-se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c new file mode 100644 index 000000000000..9d5bfc77d0de --- /dev/null +++ b/arch/sh/boards/mach-se/7206/irq.c @@ -0,0 +1,146 @@ +/* + * linux/arch/sh/boards/se/7206/irq.c + * + * Copyright (C) 2005,2006 Yoshinori Sato + * + * Hitachi SolutionEngine Support. + * + */ +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <asm/se7206.h> + +#define INTSTS0 0x31800000 +#define INTSTS1 0x31800002 +#define INTMSK0 0x31800004 +#define INTMSK1 0x31800006 +#define INTSEL 0x31800008 + +#define IRQ0_IRQ 64 +#define IRQ1_IRQ 65 +#define IRQ3_IRQ 67 + +#define INTC_IPR01 0xfffe0818 +#define INTC_ICR1 0xfffe0802 + +static void disable_se7206_irq(unsigned int irq) +{ + unsigned short val; + unsigned short mask = 0xffff ^ (0x0f << 4 * (3 - (IRQ0_IRQ - irq))); + unsigned short msk0,msk1; + + /* Set the priority in IPR to 0 */ + val = ctrl_inw(INTC_IPR01); + val &= mask; + ctrl_outw(val, INTC_IPR01); + /* FPGA mask set */ + msk0 = ctrl_inw(INTMSK0); + msk1 = ctrl_inw(INTMSK1); + + switch (irq) { + case IRQ0_IRQ: + msk0 |= 0x0010; + break; + case IRQ1_IRQ: + msk0 |= 0x000f; + break; + case IRQ3_IRQ: + msk0 |= 0x0f00; + msk1 |= 0x00ff; + break; + } + ctrl_outw(msk0, INTMSK0); + ctrl_outw(msk1, INTMSK1); +} + +static void enable_se7206_irq(unsigned int irq) +{ + unsigned short val; + unsigned short value = (0x0001 << 4 * (3 - (IRQ0_IRQ - irq))); + unsigned short msk0,msk1; + + /* Set priority in IPR back to original value */ + val = ctrl_inw(INTC_IPR01); + val |= value; + ctrl_outw(val, INTC_IPR01); + + /* FPGA mask reset */ + msk0 = ctrl_inw(INTMSK0); + msk1 = ctrl_inw(INTMSK1); + + switch (irq) { + case IRQ0_IRQ: + msk0 &= ~0x0010; + break; + case IRQ1_IRQ: + msk0 &= ~0x000f; + break; + case IRQ3_IRQ: + msk0 &= ~0x0f00; + msk1 &= ~0x00ff; + break; + } + ctrl_outw(msk0, INTMSK0); + ctrl_outw(msk1, INTMSK1); +} + +static void eoi_se7206_irq(unsigned int irq) +{ + unsigned short sts0,sts1; + + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_se7206_irq(irq); + /* FPGA isr clear */ + sts0 = ctrl_inw(INTSTS0); + sts1 = ctrl_inw(INTSTS1); + + switch (irq) { + case IRQ0_IRQ: + sts0 &= ~0x0010; + break; + case IRQ1_IRQ: + sts0 &= ~0x000f; + break; + case IRQ3_IRQ: + sts0 &= ~0x0f00; + sts1 &= ~0x00ff; + break; + } + ctrl_outw(sts0, INTSTS0); + ctrl_outw(sts1, INTSTS1); +} + +static struct irq_chip se7206_irq_chip __read_mostly = { + .name = "SE7206-FPGA", + .mask = disable_se7206_irq, + .unmask = enable_se7206_irq, + .mask_ack = disable_se7206_irq, + .eoi = eoi_se7206_irq, +}; + +static void make_se7206_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + set_irq_chip_and_handler_name(irq, &se7206_irq_chip, + handle_level_irq, "level"); + disable_se7206_irq(irq); +} + +/* + * Initialize IRQ setting + */ +void __init init_se7206_IRQ(void) +{ + make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */ + make_se7206_irq(IRQ1_IRQ); /* ATA */ + make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */ + ctrl_outw(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */ + + /* FPGA System register setup*/ + ctrl_outw(0x0000,INTSTS0); /* Clear INTSTS0 */ + ctrl_outw(0x0000,INTSTS1); /* Clear INTSTS1 */ + /* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */ + ctrl_outw(0x0001,INTSEL); +} diff --git a/arch/sh/boards/mach-se/7206/setup.c b/arch/sh/boards/mach-se/7206/setup.c new file mode 100644 index 000000000000..4fe84cc08406 --- /dev/null +++ b/arch/sh/boards/mach-se/7206/setup.c @@ -0,0 +1,108 @@ +/* + * + * linux/arch/sh/boards/se/7206/setup.c + * + * Copyright (C) 2006 Yoshinori Sato + * Copyright (C) 2007 - 2008 Paul Mundt + * + * Hitachi 7206 SolutionEngine Support. + */ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/smc91x.h> +#include <asm/se7206.h> +#include <asm/io.h> +#include <asm/machvec.h> +#include <asm/heartbeat.h> + +static struct resource smc91x_resources[] = { + [0] = { + .name = "smc91x-regs", + .start = PA_SMSC + 0x300, + .end = PA_SMSC + 0x300 + 0x020 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 64, + .end = 64, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = -1, + .dev = { + .dma_mask = NULL, + .coherent_dma_mask = 0xffffffff, + .platform_data = &smc91x_info, + }, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; + +static struct heartbeat_data heartbeat_data = { + .bit_pos = heartbeat_bit_pos, + .nr_bits = ARRAY_SIZE(heartbeat_bit_pos), + .regsize = 32, +}; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *se7206_devices[] __initdata = { + &smc91x_device, + &heartbeat_device, +}; + +static int __init se7206_devices_setup(void) +{ + return platform_add_devices(se7206_devices, ARRAY_SIZE(se7206_devices)); +} +__initcall(se7206_devices_setup); + +/* + * The Machine Vector + */ + +static struct sh_machine_vector mv_se __initmv = { + .mv_name = "SolutionEngine", + .mv_nr_irqs = 256, + .mv_inb = se7206_inb, + .mv_inw = se7206_inw, + .mv_outb = se7206_outb, + .mv_outw = se7206_outw, + + .mv_inb_p = se7206_inb_p, + .mv_inw_p = se7206_inw, + .mv_outb_p = se7206_outb_p, + .mv_outw_p = se7206_outw, + + .mv_insb = se7206_insb, + .mv_insw = se7206_insw, + .mv_outsb = se7206_outsb, + .mv_outsw = se7206_outsw, + + .mv_init_irq = init_se7206_IRQ, +}; diff --git a/arch/sh/boards/mach-se/7343/Makefile b/arch/sh/boards/mach-se/7343/Makefile new file mode 100644 index 000000000000..3024796c6203 --- /dev/null +++ b/arch/sh/boards/mach-se/7343/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the 7343 SolutionEngine specific parts of the kernel +# + +obj-y := setup.o io.o irq.o diff --git a/arch/sh/boards/mach-se/7343/io.c b/arch/sh/boards/mach-se/7343/io.c new file mode 100644 index 000000000000..e2fae32d27d7 --- /dev/null +++ b/arch/sh/boards/mach-se/7343/io.c @@ -0,0 +1,273 @@ +/* + * arch/sh/boards/se/7343/io.c + * + * I/O routine for SH-Mobile3AS 7343 SolutionEngine. + * + */ +#include <linux/kernel.h> +#include <asm/io.h> +#include <mach/se7343.h> + +#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a) + +struct iop { + unsigned long start, end; + unsigned long base; + struct iop *(*check) (struct iop * p, unsigned long port); + unsigned char (*inb) (struct iop * p, unsigned long port); + unsigned short (*inw) (struct iop * p, unsigned long port); + void (*outb) (struct iop * p, unsigned char value, unsigned long port); + void (*outw) (struct iop * p, unsigned short value, unsigned long port); +}; + +struct iop * +simple_check(struct iop *p, unsigned long port) +{ + static int count; + + if (count < 100) + count++; + + port &= 0xFFFF; + + if ((p->start <= port) && (port <= p->end)) + return p; + else + badio(check, port); +} + +struct iop * +ide_check(struct iop *p, unsigned long port) +{ + if (((0x1f0 <= port) && (port <= 0x1f7)) || (port == 0x3f7)) + return p; + return NULL; +} + +unsigned char +simple_inb(struct iop *p, unsigned long port) +{ + return *(unsigned char *) (p->base + port); +} + +unsigned short +simple_inw(struct iop *p, unsigned long port) +{ + return *(unsigned short *) (p->base + port); +} + +void +simple_outb(struct iop *p, unsigned char value, unsigned long port) +{ + *(unsigned char *) (p->base + port) = value; +} + +void +simple_outw(struct iop *p, unsigned short value, unsigned long port) +{ + *(unsigned short *) (p->base + port) = value; +} + +unsigned char +pcc_inb(struct iop *p, unsigned long port) +{ + unsigned long addr = p->base + port + 0x40000; + unsigned long v; + + if (port & 1) + addr += 0x00400000; + v = *(volatile unsigned char *) addr; + return v; +} + +void +pcc_outb(struct iop *p, unsigned char value, unsigned long port) +{ + unsigned long addr = p->base + port + 0x40000; + + if (port & 1) + addr += 0x00400000; + *(volatile unsigned char *) addr = value; +} + +unsigned char +bad_inb(struct iop *p, unsigned long port) +{ + badio(inb, port); +} + +void +bad_outb(struct iop *p, unsigned char value, unsigned long port) +{ + badio(inw, port); +} + +#ifdef CONFIG_SMC91X +/* MSTLANEX01 LAN at 0xb400:0000 */ +static struct iop laniop = { + .start = 0x00, + .end = 0x0F, + .base = 0x04000000, + .check = simple_check, + .inb = simple_inb, + .inw = simple_inw, + .outb = simple_outb, + .outw = simple_outw, +}; +#endif + +#ifdef CONFIG_NE2000 +/* NE2000 pc card NIC */ +static struct iop neiop = { + .start = 0x280, + .end = 0x29f, + .base = 0xb0600000 + 0x80, /* soft 0x280 -> hard 0x300 */ + .check = simple_check, + .inb = pcc_inb, + .inw = simple_inw, + .outb = pcc_outb, + .outw = simple_outw, +}; +#endif + +#ifdef CONFIG_IDE +/* CF in CF slot */ +static struct iop cfiop = { + .base = 0xb0600000, + .check = ide_check, + .inb = pcc_inb, + .inw = simple_inw, + .outb = pcc_outb, + .outw = simple_outw, +}; +#endif + +static __inline__ struct iop * +port2iop(unsigned long port) +{ + if (0) ; +#if defined(CONFIG_SMC91X) + else if (laniop.check(&laniop, port)) + return &laniop; +#endif +#if defined(CONFIG_NE2000) + else if (neiop.check(&neiop, port)) + return &neiop; +#endif +#if defined(CONFIG_IDE) + else if (cfiop.check(&cfiop, port)) + return &cfiop; +#endif + else + return NULL; +} + +static inline void +delay(void) +{ + ctrl_inw(0xac000000); + ctrl_inw(0xac000000); +} + +unsigned char +sh7343se_inb(unsigned long port) +{ + struct iop *p = port2iop(port); + return (p->inb) (p, port); +} + +unsigned char +sh7343se_inb_p(unsigned long port) +{ + unsigned char v = sh7343se_inb(port); + delay(); + return v; +} + +unsigned short +sh7343se_inw(unsigned long port) +{ + struct iop *p = port2iop(port); + return (p->inw) (p, port); +} + +unsigned int +sh7343se_inl(unsigned long port) +{ + badio(inl, port); +} + +void +sh7343se_outb(unsigned char value, unsigned long port) +{ + struct iop *p = port2iop(port); + (p->outb) (p, value, port); +} + +void +sh7343se_outb_p(unsigned char value, unsigned long port) +{ + sh7343se_outb(value, port); + delay(); +} + +void +sh7343se_outw(unsigned short value, unsigned long port) +{ + struct iop *p = port2iop(port); + (p->outw) (p, value, port); +} + +void +sh7343se_outl(unsigned int value, unsigned long port) +{ + badio(outl, port); +} + +void +sh7343se_insb(unsigned long port, void *addr, unsigned long count) +{ + unsigned char *a = addr; + struct iop *p = port2iop(port); + while (count--) + *a++ = (p->inb) (p, port); +} + +void +sh7343se_insw(unsigned long port, void *addr, unsigned long count) +{ + unsigned short *a = addr; + struct iop *p = port2iop(port); + while (count--) + *a++ = (p->inw) (p, port); +} + +void +sh7343se_insl(unsigned long port, void *addr, unsigned long count) +{ + badio(insl, port); +} + +void +sh7343se_outsb(unsigned long port, const void *addr, unsigned long count) +{ + unsigned char *a = (unsigned char *) addr; + struct iop *p = port2iop(port); + while (count--) + (p->outb) (p, *a++, port); +} + +void +sh7343se_outsw(unsigned long port, const void *addr, unsigned long count) +{ + unsigned short *a = (unsigned short *) addr; + struct iop *p = port2iop(port); + while (count--) + (p->outw) (p, *a++, port); +} + +void +sh7343se_outsl(unsigned long port, const void *addr, unsigned long count) +{ + badio(outsw, port); +} diff --git a/arch/sh/boards/mach-se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c new file mode 100644 index 000000000000..1112e86aa93a --- /dev/null +++ b/arch/sh/boards/mach-se/7343/irq.c @@ -0,0 +1,80 @@ +/* + * linux/arch/sh/boards/se/7343/irq.c + * + * Copyright (C) 2008 Yoshihiro Shimoda + * + * Based on linux/arch/sh/boards/se/7722/irq.c + * Copyright (C) 2007 Nobuhiro Iwamatsu + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <asm/irq.h> +#include <asm/io.h> +#include <asm/se7343.h> + +static void disable_se7343_irq(unsigned int irq) +{ + unsigned int bit = irq - SE7343_FPGA_IRQ_BASE; + ctrl_outw(ctrl_inw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK); +} + +static void enable_se7343_irq(unsigned int irq) +{ + unsigned int bit = irq - SE7343_FPGA_IRQ_BASE; + ctrl_outw(ctrl_inw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK); +} + +static struct irq_chip se7343_irq_chip __read_mostly = { + .name = "SE7343-FPGA", + .mask = disable_se7343_irq, + .unmask = enable_se7343_irq, + .mask_ack = disable_se7343_irq, +}; + +static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc) +{ + unsigned short intv = ctrl_inw(PA_CPLD_ST); + struct irq_desc *ext_desc; + unsigned int ext_irq = SE7343_FPGA_IRQ_BASE; + + intv &= (1 << SE7343_FPGA_IRQ_NR) - 1; + + while (intv) { + if (intv & 1) { + ext_desc = irq_desc + ext_irq; + handle_level_irq(ext_irq, ext_desc); + } + intv >>= 1; + ext_irq++; + } +} + +/* + * Initialize IRQ setting + */ +void __init init_7343se_IRQ(void) +{ + int i; + + ctrl_outw(0, PA_CPLD_IMSK); /* disable all irqs */ + ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */ + + for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) + set_irq_chip_and_handler_name(SE7343_FPGA_IRQ_BASE + i, + &se7343_irq_chip, + handle_level_irq, "level"); + + set_irq_chained_handler(IRQ0_IRQ, se7343_irq_demux); + set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW); + set_irq_chained_handler(IRQ1_IRQ, se7343_irq_demux); + set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW); + set_irq_chained_handler(IRQ4_IRQ, se7343_irq_demux); + set_irq_type(IRQ4_IRQ, IRQ_TYPE_LEVEL_LOW); + set_irq_chained_handler(IRQ5_IRQ, se7343_irq_demux); + set_irq_type(IRQ5_IRQ, IRQ_TYPE_LEVEL_LOW); +} diff --git a/arch/sh/boards/mach-se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c new file mode 100644 index 000000000000..59dc92e20f64 --- /dev/null +++ b/arch/sh/boards/mach-se/7343/setup.c @@ -0,0 +1,152 @@ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <machvec.h> +#include <mach/se7343.h> +#include <asm/heartbeat.h> +#include <asm/irq.h> +#include <asm/io.h> + +static struct resource smc91x_resources[] = { + [0] = { + .start = 0x10000000, + .end = 0x1000000F, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* + * shared with other devices via externel + * interrupt controller in FPGA... + */ + .start = SMC_IRQ, + .end = SMC_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED, + .flags = IORESOURCE_MEM, + }, +}; + +static struct heartbeat_data heartbeat_data = { + .regsize = 16, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct mtd_partition nor_flash_partitions[] = { + { + .name = "loader", + .offset = 0x00000000, + .size = 128 * 1024, + }, + { + .name = "rootfs", + .offset = MTDPART_OFS_APPEND, + .size = 31 * 1024 * 1024, + }, + { + .name = "data", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data nor_flash_data = { + .width = 2, + .parts = nor_flash_partitions, + .nr_parts = ARRAY_SIZE(nor_flash_partitions), +}; + +static struct resource nor_flash_resources[] = { + [0] = { + .start = 0x00000000, + .end = 0x01ffffff, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device nor_flash_device = { + .name = "physmap-flash", + .dev = { + .platform_data = &nor_flash_data, + }, + .num_resources = ARRAY_SIZE(nor_flash_resources), + .resource = nor_flash_resources, +}; + +static struct platform_device *sh7343se_platform_devices[] __initdata = { + &smc91x_device, + &heartbeat_device, + &nor_flash_device, +}; + +static int __init sh7343se_devices_setup(void) +{ + return platform_add_devices(sh7343se_platform_devices, + ARRAY_SIZE(sh7343se_platform_devices)); +} +device_initcall(sh7343se_devices_setup); + +/* + * Initialize the board + */ +static void __init sh7343se_setup(char **cmdline_p) +{ + ctrl_outw(0xf900, FPGA_OUT); /* FPGA */ + + ctrl_outw(0x0002, PORT_PECR); /* PORT E 1 = IRQ5 */ + ctrl_outw(0x0020, PORT_PSELD); + + printk(KERN_INFO "MS7343CP01 Setup...done\n"); +} + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_7343se __initmv = { + .mv_name = "SolutionEngine 7343", + .mv_setup = sh7343se_setup, + .mv_nr_irqs = 108, + .mv_inb = sh7343se_inb, + .mv_inw = sh7343se_inw, + .mv_inl = sh7343se_inl, + .mv_outb = sh7343se_outb, + .mv_outw = sh7343se_outw, + .mv_outl = sh7343se_outl, + + .mv_inb_p = sh7343se_inb_p, + .mv_inw_p = sh7343se_inw, + .mv_inl_p = sh7343se_inl, + .mv_outb_p = sh7343se_outb_p, + .mv_outw_p = sh7343se_outw, + .mv_outl_p = sh7343se_outl, + + .mv_insb = sh7343se_insb, + .mv_insw = sh7343se_insw, + .mv_insl = sh7343se_insl, + .mv_outsb = sh7343se_outsb, + .mv_outsw = sh7343se_outsw, + .mv_outsl = sh7343se_outsl, + + .mv_init_irq = init_7343se_IRQ, +}; diff --git a/arch/sh/boards/mach-se/7619/Makefile b/arch/sh/boards/mach-se/7619/Makefile new file mode 100644 index 000000000000..d21775c28cda --- /dev/null +++ b/arch/sh/boards/mach-se/7619/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the 7619 SolutionEngine specific parts of the kernel +# + +obj-y := setup.o diff --git a/arch/sh/boards/mach-se/7619/setup.c b/arch/sh/boards/mach-se/7619/setup.c new file mode 100644 index 000000000000..1d0ef7faa10d --- /dev/null +++ b/arch/sh/boards/mach-se/7619/setup.c @@ -0,0 +1,21 @@ +/* + * arch/sh/boards/se/7619/setup.c + * + * Copyright (C) 2006 Yoshinori Sato + * + * Hitachi SH7619 SolutionEngine Support. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <asm/io.h> +#include <asm/machvec.h> + +/* + * The Machine Vector + */ + +static struct sh_machine_vector mv_se __initmv = { + .mv_name = "SolutionEngine", + .mv_nr_irqs = 108, +}; diff --git a/arch/sh/boards/mach-se/770x/Makefile b/arch/sh/boards/mach-se/770x/Makefile new file mode 100644 index 000000000000..8e624b06d5ea --- /dev/null +++ b/arch/sh/boards/mach-se/770x/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the 770x SolutionEngine specific parts of the kernel +# + +obj-y := setup.o io.o irq.o diff --git a/arch/sh/boards/mach-se/770x/io.c b/arch/sh/boards/mach-se/770x/io.c new file mode 100644 index 000000000000..b1ec085b8673 --- /dev/null +++ b/arch/sh/boards/mach-se/770x/io.c @@ -0,0 +1,156 @@ +/* + * Copyright (C) 2000 Kazumoto Kojima + * + * I/O routine for Hitachi SolutionEngine. + */ +#include <linux/kernel.h> +#include <linux/types.h> +#include <asm/io.h> +#include <asm/se.h> + +/* MS7750 requires special versions of in*, out* routines, since + PC-like io ports are located at upper half byte of 16-bit word which + can be accessed only with 16-bit wide. */ + +static inline volatile __u16 * +port2adr(unsigned int port) +{ + if (port & 0xff000000) + return ( volatile __u16 *) port; + if (port >= 0x2000) + return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); + else if (port >= 0x1000) + return (volatile __u16 *) (PA_83902 + (port << 1)); + else + return (volatile __u16 *) (PA_SUPERIO + (port << 1)); +} + +static inline int +shifted_port(unsigned long port) +{ + /* For IDE registers, value is not shifted */ + if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) + return 0; + else + return 1; +} + +unsigned char se_inb(unsigned long port) +{ + if (shifted_port(port)) + return (*port2adr(port) >> 8); + else + return (*port2adr(port))&0xff; +} + +unsigned char se_inb_p(unsigned long port) +{ + unsigned long v; + + if (shifted_port(port)) + v = (*port2adr(port) >> 8); + else + v = (*port2adr(port))&0xff; + ctrl_delay(); + return v; +} + +unsigned short se_inw(unsigned long port) +{ + if (port >= 0x2000) + return *port2adr(port); + else + maybebadio(port); + return 0; +} + +unsigned int se_inl(unsigned long port) +{ + maybebadio(port); + return 0; +} + +void se_outb(unsigned char value, unsigned long port) +{ + if (shifted_port(port)) + *(port2adr(port)) = value << 8; + else + *(port2adr(port)) = value; +} + +void se_outb_p(unsigned char value, unsigned long port) +{ + if (shifted_port(port)) + *(port2adr(port)) = value << 8; + else + *(port2adr(port)) = value; + ctrl_delay(); +} + +void se_outw(unsigned short value, unsigned long port) +{ + if (port >= 0x2000) + *port2adr(port) = value; + else + maybebadio(port); +} + +void se_outl(unsigned int value, unsigned long port) +{ + maybebadio(port); +} + +void se_insb(unsigned long port, void *addr, unsigned long count) +{ + volatile __u16 *p = port2adr(port); + __u8 *ap = addr; + + if (shifted_port(port)) { + while (count--) + *ap++ = *p >> 8; + } else { + while (count--) + *ap++ = *p; + } +} + +void se_insw(unsigned long port, void *addr, unsigned long count) +{ + volatile __u16 *p = port2adr(port); + __u16 *ap = addr; + while (count--) + *ap++ = *p; +} + +void se_insl(unsigned long port, void *addr, unsigned long count) +{ + maybebadio(port); +} + +void se_outsb(unsigned long port, const void *addr, unsigned long count) +{ + volatile __u16 *p = port2adr(port); + const __u8 *ap = addr; + + if (shifted_port(port)) { + while (count--) + *p = *ap++ << 8; + } else { + while (count--) + *p = *ap++; + } +} + +void se_outsw(unsigned long port, const void *addr, unsigned long count) +{ + volatile __u16 *p = port2adr(port); + const __u16 *ap = addr; + + while (count--) + *p = *ap++; +} + +void se_outsl(unsigned long port, const void *addr, unsigned long count) +{ + maybebadio(port); +} diff --git a/arch/sh/boards/mach-se/770x/irq.c b/arch/sh/boards/mach-se/770x/irq.c new file mode 100644 index 000000000000..cdb0807928a5 --- /dev/null +++ b/arch/sh/boards/mach-se/770x/irq.c @@ -0,0 +1,108 @@ +/* + * linux/arch/sh/boards/se/770x/irq.c + * + * Copyright (C) 2000 Kazumoto Kojima + * Copyright (C) 2006 Nobuhiro Iwamatsu + * + * Hitachi SolutionEngine Support. + * + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <asm/irq.h> +#include <asm/io.h> +#include <asm/se.h> + +static struct ipr_data ipr_irq_table[] = { + /* + * Super I/O (Just mimic PC): + * 1: keyboard + * 3: serial 0 + * 4: serial 1 + * 5: printer + * 6: floppy + * 8: rtc + * 12: mouse + * 14: ide0 + */ +#if defined(CONFIG_CPU_SUBTYPE_SH7705) + /* This is default value */ + { 13, 0, 8, 0x0f-13, }, + { 5 , 0, 4, 0x0f- 5, }, + { 10, 1, 0, 0x0f-10, }, + { 7 , 2, 4, 0x0f- 7, }, + { 3 , 2, 0, 0x0f- 3, }, + { 1 , 3, 12, 0x0f- 1, }, + { 12, 3, 4, 0x0f-12, }, /* LAN */ + { 2 , 4, 8, 0x0f- 2, }, /* PCIRQ2 */ + { 6 , 4, 4, 0x0f- 6, }, /* PCIRQ1 */ + { 14, 4, 0, 0x0f-14, }, /* PCIRQ0 */ + { 0 , 5, 12, 0x0f , }, + { 4 , 5, 4, 0x0f- 4, }, + { 8 , 6, 12, 0x0f- 8, }, + { 9 , 6, 8, 0x0f- 9, }, + { 11, 6, 4, 0x0f-11, }, +#else + { 14, 0, 8, 0x0f-14, }, + { 12, 0, 4, 0x0f-12, }, + { 8, 1, 4, 0x0f- 8, }, + { 6, 2, 12, 0x0f- 6, }, + { 5, 2, 8, 0x0f- 5, }, + { 4, 2, 4, 0x0f- 4, }, + { 3, 2, 0, 0x0f- 3, }, + { 1, 3, 12, 0x0f- 1, }, +#if defined(CONFIG_STNIC) + /* ST NIC */ + { 10, 3, 4, 0x0f-10, }, /* LAN */ +#endif + /* MRSHPC IRQs setting */ + { 0, 4, 12, 0x0f- 0, }, /* PCIRQ3 */ + { 11, 4, 8, 0x0f-11, }, /* PCIRQ2 */ + { 9, 4, 4, 0x0f- 9, }, /* PCIRQ1 */ + { 7, 4, 0, 0x0f- 7, }, /* PCIRQ0 */ + /* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */ + /* NOTE: #2 and #13 are not used on PC */ + { 13, 6, 4, 0x0f-13, }, /* SLOTIRQ2 */ + { 2, 6, 0, 0x0f- 2, }, /* SLOTIRQ1 */ +#endif +}; + +static unsigned long ipr_offsets[] = { + BCR_ILCRA, + BCR_ILCRB, + BCR_ILCRC, + BCR_ILCRD, + BCR_ILCRE, + BCR_ILCRF, + BCR_ILCRG, +}; + +static struct ipr_desc ipr_irq_desc = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), + + .ipr_data = ipr_irq_table, + .nr_irqs = ARRAY_SIZE(ipr_irq_table), + .chip = { + .name = "IPR-se770x", + }, +}; + +/* + * Initialize IRQ setting + */ +void __init init_se_IRQ(void) +{ + /* Disable all interrupts */ + ctrl_outw(0, BCR_ILCRA); + ctrl_outw(0, BCR_ILCRB); + ctrl_outw(0, BCR_ILCRC); + ctrl_outw(0, BCR_ILCRD); + ctrl_outw(0, BCR_ILCRE); + ctrl_outw(0, BCR_ILCRF); + ctrl_outw(0, BCR_ILCRG); + + register_ipr_controller(&ipr_irq_desc); +} diff --git a/arch/sh/boards/mach-se/770x/setup.c b/arch/sh/boards/mach-se/770x/setup.c new file mode 100644 index 000000000000..6c64d774da3a --- /dev/null +++ b/arch/sh/boards/mach-se/770x/setup.c @@ -0,0 +1,222 @@ +/* + * linux/arch/sh/boards/se/770x/setup.c + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Hitachi SolutionEngine Support. + * + */ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <asm/machvec.h> +#include <asm/se.h> +#include <asm/io.h> +#include <asm/smc37c93x.h> +#include <asm/heartbeat.h> + +/* + * Configure the Super I/O chip + */ +static void __init smsc_config(int index, int data) +{ + outb_p(index, INDEX_PORT); + outb_p(data, DATA_PORT); +} + +/* XXX: Another candidate for a more generic cchip machine vector */ +static void __init smsc_setup(char **cmdline_p) +{ + outb_p(CONFIG_ENTER, CONFIG_PORT); + outb_p(CONFIG_ENTER, CONFIG_PORT); + + /* FDC */ + smsc_config(CURRENT_LDN_INDEX, LDN_FDC); + smsc_config(ACTIVATE_INDEX, 0x01); + smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */ + + /* AUXIO (GPIO): to use IDE1 */ + smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO); + smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */ + smsc_config(GPIO47_INDEX, 0x00); /* nIOWOP */ + + /* COM1 */ + smsc_config(CURRENT_LDN_INDEX, LDN_COM1); + smsc_config(ACTIVATE_INDEX, 0x01); + smsc_config(IO_BASE_HI_INDEX, 0x03); + smsc_config(IO_BASE_LO_INDEX, 0xf8); + smsc_config(IRQ_SELECT_INDEX, 4); /* IRQ4 */ + + /* COM2 */ + smsc_config(CURRENT_LDN_INDEX, LDN_COM2); + smsc_config(ACTIVATE_INDEX, 0x01); + smsc_config(IO_BASE_HI_INDEX, 0x02); + smsc_config(IO_BASE_LO_INDEX, 0xf8); + smsc_config(IRQ_SELECT_INDEX, 3); /* IRQ3 */ + + /* RTC */ + smsc_config(CURRENT_LDN_INDEX, LDN_RTC); + smsc_config(ACTIVATE_INDEX, 0x01); + smsc_config(IRQ_SELECT_INDEX, 8); /* IRQ8 */ + + /* XXX: PARPORT, KBD, and MOUSE will come here... */ + outb_p(CONFIG_EXIT, CONFIG_PORT); +} + + +static struct resource cf_ide_resources[] = { + [0] = { + .start = PA_MRSHPC_IO + 0x1f0, + .end = PA_MRSHPC_IO + 0x1f0 + 8, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PA_MRSHPC_IO + 0x1f0 + 0x206, + .end = PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = IRQ_CFCARD, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cf_ide_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(cf_ide_resources), + .resource = cf_ide_resources, +}; + +static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; + +static struct heartbeat_data heartbeat_data = { + .bit_pos = heartbeat_bit_pos, + .nr_bits = ARRAY_SIZE(heartbeat_bit_pos), + .regsize = 16, +}; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\ + defined(CONFIG_CPU_SUBTYPE_SH7712) +/* SH771X Ethernet driver */ +static struct resource sh_eth0_resources[] = { + [0] = { + .start = SH_ETH0_BASE, + .end = SH_ETH0_BASE + 0x1B8, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = SH_ETH0_IRQ, + .end = SH_ETH0_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sh_eth0_device = { + .name = "sh-eth", + .id = 0, + .dev = { + .platform_data = PHY_ID, + }, + .num_resources = ARRAY_SIZE(sh_eth0_resources), + .resource = sh_eth0_resources, +}; + +static struct resource sh_eth1_resources[] = { + [0] = { + .start = SH_ETH1_BASE, + .end = SH_ETH1_BASE + 0x1B8, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = SH_ETH1_IRQ, + .end = SH_ETH1_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sh_eth1_device = { + .name = "sh-eth", + .id = 1, + .dev = { + .platform_data = PHY_ID, + }, + .num_resources = ARRAY_SIZE(sh_eth1_resources), + .resource = sh_eth1_resources, +}; +#endif + +static struct platform_device *se_devices[] __initdata = { + &heartbeat_device, + &cf_ide_device, +#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\ + defined(CONFIG_CPU_SUBTYPE_SH7712) + &sh_eth0_device, + &sh_eth1_device, +#endif +}; + +static int __init se_devices_setup(void) +{ + return platform_add_devices(se_devices, ARRAY_SIZE(se_devices)); +} +device_initcall(se_devices_setup); + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_se __initmv = { + .mv_name = "SolutionEngine", + .mv_setup = smsc_setup, +#if defined(CONFIG_CPU_SH4) + .mv_nr_irqs = 48, +#elif defined(CONFIG_CPU_SUBTYPE_SH7708) + .mv_nr_irqs = 32, +#elif defined(CONFIG_CPU_SUBTYPE_SH7709) + .mv_nr_irqs = 61, +#elif defined(CONFIG_CPU_SUBTYPE_SH7705) + .mv_nr_irqs = 86, +#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) + .mv_nr_irqs = 104, +#endif + + .mv_inb = se_inb, + .mv_inw = se_inw, + .mv_inl = se_inl, + .mv_outb = se_outb, + .mv_outw = se_outw, + .mv_outl = se_outl, + + .mv_inb_p = se_inb_p, + .mv_inw_p = se_inw, + .mv_inl_p = se_inl, + .mv_outb_p = se_outb_p, + .mv_outw_p = se_outw, + .mv_outl_p = se_outl, + + .mv_insb = se_insb, + .mv_insw = se_insw, + .mv_insl = se_insl, + .mv_outsb = se_outsb, + .mv_outsw = se_outsw, + .mv_outsl = se_outsl, + + .mv_init_irq = init_se_IRQ, +}; diff --git a/arch/sh/boards/mach-se/7721/Makefile b/arch/sh/boards/mach-se/7721/Makefile new file mode 100644 index 000000000000..7f09030980b3 --- /dev/null +++ b/arch/sh/boards/mach-se/7721/Makefile @@ -0,0 +1 @@ +obj-y := setup.o irq.o diff --git a/arch/sh/boards/mach-se/7721/irq.c b/arch/sh/boards/mach-se/7721/irq.c new file mode 100644 index 000000000000..c4fdd622bf8b --- /dev/null +++ b/arch/sh/boards/mach-se/7721/irq.c @@ -0,0 +1,45 @@ +/* + * linux/arch/sh/boards/se/7721/irq.c + * + * Copyright (C) 2008 Renesas Solutions Corp. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <asm/se7721.h> + +enum { + UNUSED = 0, + + /* board specific interrupt sources */ + MRSHPC, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_IRQ(MRSHPC, MRSHPC_IRQ0), +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { FPGA_ILSR6, 0, 8, 4, /* IRLMSK */ + { 0, MRSHPC } }, +}; + +static DECLARE_INTC_DESC(intc_desc, "SE7721", vectors, + NULL, NULL, prio_registers, NULL); + +/* + * Initialize IRQ setting + */ +void __init init_se7721_IRQ(void) +{ + /* PPCR */ + ctrl_outw(ctrl_inw(0xa4050118) & ~0x00ff, 0xa4050118); + + register_intc_controller(&intc_desc); + intc_set_priority(MRSHPC_IRQ0, 0xf - MRSHPC_IRQ0); +} diff --git a/arch/sh/boards/mach-se/7721/setup.c b/arch/sh/boards/mach-se/7721/setup.c new file mode 100644 index 000000000000..1be3e92752f7 --- /dev/null +++ b/arch/sh/boards/mach-se/7721/setup.c @@ -0,0 +1,99 @@ +/* + * linux/arch/sh/boards/se/7721/setup.c + * + * Copyright (C) 2008 Renesas Solutions Corp. + * + * Hitachi UL SolutionEngine 7721 Support. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <asm/machvec.h> +#include <asm/se7721.h> +#include <asm/io.h> +#include <asm/heartbeat.h> + +static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; + +static struct heartbeat_data heartbeat_data = { + .bit_pos = heartbeat_bit_pos, + .nr_bits = ARRAY_SIZE(heartbeat_bit_pos), + .regsize = 16, +}; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct resource cf_ide_resources[] = { + [0] = { + .start = PA_MRSHPC_IO + 0x1f0, + .end = PA_MRSHPC_IO + 0x1f0 + 8 , + .flags = IORESOURCE_IO, + }, + [1] = { + .start = PA_MRSHPC_IO + 0x1f0 + 0x206, + .end = PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8, + .flags = IORESOURCE_IO, + }, + [2] = { + .start = MRSHPC_IRQ0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cf_ide_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(cf_ide_resources), + .resource = cf_ide_resources, +}; + +static struct platform_device *se7721_devices[] __initdata = { + &cf_ide_device, + &heartbeat_device +}; + +static int __init se7721_devices_setup(void) +{ + return platform_add_devices(se7721_devices, + ARRAY_SIZE(se7721_devices)); +} +device_initcall(se7721_devices_setup); + +static void __init se7721_setup(char **cmdline_p) +{ + /* for USB */ + ctrl_outw(0x0000, 0xA405010C); /* PGCR */ + ctrl_outw(0x0000, 0xA405010E); /* PHCR */ + ctrl_outw(0x00AA, 0xA4050118); /* PPCR */ + ctrl_outw(0x0000, 0xA4050124); /* PSELA */ +} + +/* + * The Machine Vector + */ +struct sh_machine_vector mv_se7721 __initmv = { + .mv_name = "Solution Engine 7721", + .mv_setup = se7721_setup, + .mv_nr_irqs = 109, + .mv_init_irq = init_se7721_IRQ, +}; diff --git a/arch/sh/boards/mach-se/7722/Makefile b/arch/sh/boards/mach-se/7722/Makefile new file mode 100644 index 000000000000..8694373389e5 --- /dev/null +++ b/arch/sh/boards/mach-se/7722/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for the HITACHI UL SolutionEngine 7722 specific parts of the kernel +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# + +obj-y := setup.o irq.o diff --git a/arch/sh/boards/mach-se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c new file mode 100644 index 000000000000..0b03f3f610b8 --- /dev/null +++ b/arch/sh/boards/mach-se/7722/irq.c @@ -0,0 +1,76 @@ +/* + * linux/arch/sh/boards/se/7722/irq.c + * + * Copyright (C) 2007 Nobuhiro Iwamatsu + * + * Hitachi UL SolutionEngine 7722 Support. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <asm/irq.h> +#include <asm/io.h> +#include <asm/se7722.h> + +static void disable_se7722_irq(unsigned int irq) +{ + unsigned int bit = irq - SE7722_FPGA_IRQ_BASE; + ctrl_outw(ctrl_inw(IRQ01_MASK) | 1 << bit, IRQ01_MASK); +} + +static void enable_se7722_irq(unsigned int irq) +{ + unsigned int bit = irq - SE7722_FPGA_IRQ_BASE; + ctrl_outw(ctrl_inw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK); +} + +static struct irq_chip se7722_irq_chip __read_mostly = { + .name = "SE7722-FPGA", + .mask = disable_se7722_irq, + .unmask = enable_se7722_irq, + .mask_ack = disable_se7722_irq, +}; + +static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc) +{ + unsigned short intv = ctrl_inw(IRQ01_STS); + struct irq_desc *ext_desc; + unsigned int ext_irq = SE7722_FPGA_IRQ_BASE; + + intv &= (1 << SE7722_FPGA_IRQ_NR) - 1; + + while (intv) { + if (intv & 1) { + ext_desc = irq_desc + ext_irq; + handle_level_irq(ext_irq, ext_desc); + } + intv >>= 1; + ext_irq++; + } +} + +/* + * Initialize IRQ setting + */ +void __init init_se7722_IRQ(void) +{ + int i; + + ctrl_outw(0, IRQ01_MASK); /* disable all irqs */ + ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */ + + for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) + set_irq_chip_and_handler_name(SE7722_FPGA_IRQ_BASE + i, + &se7722_irq_chip, + handle_level_irq, "level"); + + set_irq_chained_handler(IRQ0_IRQ, se7722_irq_demux); + set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW); + + set_irq_chained_handler(IRQ1_IRQ, se7722_irq_demux); + set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW); +} diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c new file mode 100644 index 000000000000..6e228ea59788 --- /dev/null +++ b/arch/sh/boards/mach-se/7722/setup.c @@ -0,0 +1,194 @@ +/* + * linux/arch/sh/boards/se/7722/setup.c + * + * Copyright (C) 2007 Nobuhiro Iwamatsu + * + * Hitachi UL SolutionEngine 7722 Support. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ata_platform.h> +#include <linux/input.h> +#include <linux/smc91x.h> +#include <asm/machvec.h> +#include <asm/clock.h> +#include <asm/se7722.h> +#include <asm/io.h> +#include <asm/heartbeat.h> +#include <asm/sh_keysc.h> + +/* Heartbeat */ +static struct heartbeat_data heartbeat_data = { + .regsize = 16, +}; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +/* SMC91x */ +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT, +}; + +static struct resource smc91x_eth_resources[] = { + [0] = { + .name = "smc91x-regs" , + .start = PA_LAN + 0x300, + .end = PA_LAN + 0x300 + 0x10 , + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = SMC_IRQ, + .end = SMC_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc91x_eth_device = { + .name = "smc91x", + .id = 0, + .dev = { + .dma_mask = NULL, /* don't use dma */ + .coherent_dma_mask = 0xffffffff, + .platform_data = &smc91x_info, + }, + .num_resources = ARRAY_SIZE(smc91x_eth_resources), + .resource = smc91x_eth_resources, +}; + +static struct resource cf_ide_resources[] = { + [0] = { + .start = PA_MRSHPC_IO + 0x1f0, + .end = PA_MRSHPC_IO + 0x1f0 + 8 , + .flags = IORESOURCE_IO, + }, + [1] = { + .start = PA_MRSHPC_IO + 0x1f0 + 0x206, + .end = PA_MRSHPC_IO + 0x1f0 +8 + 0x206 + 8, + .flags = IORESOURCE_IO, + }, + [2] = { + .start = MRSHPC_IRQ0, + .end = MRSHPC_IRQ0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cf_ide_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(cf_ide_resources), + .resource = cf_ide_resources, +}; + +static struct sh_keysc_info sh_keysc_info = { + .mode = SH_KEYSC_MODE_1, /* KEYOUT0->5, KEYIN0->4 */ + .scan_timing = 3, + .delay = 5, + .keycodes = { /* SW1 -> SW30 */ + KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, + KEY_F, KEY_G, KEY_H, KEY_I, KEY_J, + KEY_K, KEY_L, KEY_M, KEY_N, KEY_O, + KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T, + KEY_U, KEY_V, KEY_W, KEY_X, KEY_Y, + KEY_Z, + KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE, /* life */ + }, +}; + +static struct resource sh_keysc_resources[] = { + [0] = { + .start = 0x044b0000, + .end = 0x044b000f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 79, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sh_keysc_device = { + .name = "sh_keysc", + .num_resources = ARRAY_SIZE(sh_keysc_resources), + .resource = sh_keysc_resources, + .dev = { + .platform_data = &sh_keysc_info, + }, +}; + +static struct platform_device *se7722_devices[] __initdata = { + &heartbeat_device, + &smc91x_eth_device, + &cf_ide_device, + &sh_keysc_device, +}; + +static int __init se7722_devices_setup(void) +{ + clk_always_enable("mstp214"); /* KEYSC */ + + return platform_add_devices(se7722_devices, + ARRAY_SIZE(se7722_devices)); +} +device_initcall(se7722_devices_setup); + +static void __init se7722_setup(char **cmdline_p) +{ + ctrl_outw(0x010D, FPGA_OUT); /* FPGA */ + + ctrl_outw(0x0000, PORT_PECR); /* PORT E 1 = IRQ5 ,E 0 = BS */ + ctrl_outw(0x1000, PORT_PJCR); /* PORT J 1 = IRQ1,J 0 =IRQ0 */ + + /* LCDC I/O */ + ctrl_outw(0x0020, PORT_PSELD); + + /* SIOF1*/ + ctrl_outw(0x0003, PORT_PSELB); + ctrl_outw(0xe000, PORT_PSELC); + ctrl_outw(0x0000, PORT_PKCR); + + /* LCDC */ + ctrl_outw(0x4020, PORT_PHCR); + ctrl_outw(0x0000, PORT_PLCR); + ctrl_outw(0x0000, PORT_PMCR); + ctrl_outw(0x0002, PORT_PRCR); + ctrl_outw(0x0000, PORT_PXCR); /* LCDC,CS6A */ + + /* KEYSC */ + ctrl_outw(0x0A10, PORT_PSELA); /* BS,SHHID2 */ + ctrl_outw(0x0000, PORT_PYCR); + ctrl_outw(0x0000, PORT_PZCR); + ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA); + ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC); +} + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_se7722 __initmv = { + .mv_name = "Solution Engine 7722" , + .mv_setup = se7722_setup , + .mv_nr_irqs = SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_NR, + .mv_init_irq = init_se7722_IRQ, +}; diff --git a/arch/sh/boards/mach-se/7751/Makefile b/arch/sh/boards/mach-se/7751/Makefile new file mode 100644 index 000000000000..dbc29f3a9de5 --- /dev/null +++ b/arch/sh/boards/mach-se/7751/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for the 7751 SolutionEngine specific parts of the kernel +# + +obj-y := setup.o io.o irq.o + +obj-$(CONFIG_PCI) += pci.o diff --git a/arch/sh/boards/mach-se/7751/io.c b/arch/sh/boards/mach-se/7751/io.c new file mode 100644 index 000000000000..e8d846cec89d --- /dev/null +++ b/arch/sh/boards/mach-se/7751/io.c @@ -0,0 +1,135 @@ +/* + * Copyright (C) 2001 Ian da Silva, Jeremy Siegel + * Based largely on io_se.c. + * + * I/O routine for Hitachi 7751 SolutionEngine. + * + * Initial version only to support LAN access; some + * placeholder code from io_se.c left in with the + * expectation of later SuperIO and PCMCIA access. + */ +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <asm/io.h> +#include <asm/se7751.h> +#include <asm/addrspace.h> + +static inline volatile u16 *port2adr(unsigned int port) +{ + if (port >= 0x2000) + return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); + maybebadio((unsigned long)port); + return (volatile __u16*)port; +} + +/* + * General outline: remap really low stuff [eventually] to SuperIO, + * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) + * is mapped through the PCI IO window. Stuff with high bits (PXSEG) + * should be way beyond the window, and is used w/o translation for + * compatibility. + */ +unsigned char sh7751se_inb(unsigned long port) +{ + if (PXSEG(port)) + return *(volatile unsigned char *)port; + else if (is_pci_ioaddr(port)) + return *(volatile unsigned char *)pci_ioaddr(port); + else + return (*port2adr(port)) & 0xff; +} + +unsigned char sh7751se_inb_p(unsigned long port) +{ + unsigned char v; + + if (PXSEG(port)) + v = *(volatile unsigned char *)port; + else if (is_pci_ioaddr(port)) + v = *(volatile unsigned char *)pci_ioaddr(port); + else + v = (*port2adr(port)) & 0xff; + ctrl_delay(); + return v; +} + +unsigned short sh7751se_inw(unsigned long port) +{ + if (PXSEG(port)) + return *(volatile unsigned short *)port; + else if (is_pci_ioaddr(port)) + return *(volatile unsigned short *)pci_ioaddr(port); + else if (port >= 0x2000) + return *port2adr(port); + else + maybebadio(port); + return 0; +} + +unsigned int sh7751se_inl(unsigned long port) +{ + if (PXSEG(port)) + return *(volatile unsigned long *)port; + else if (is_pci_ioaddr(port)) + return *(volatile unsigned int *)pci_ioaddr(port); + else if (port >= 0x2000) + return *port2adr(port); + else + maybebadio(port); + return 0; +} + +void sh7751se_outb(unsigned char value, unsigned long port) +{ + + if (PXSEG(port)) + *(volatile unsigned char *)port = value; + else if (is_pci_ioaddr(port)) + *((unsigned char*)pci_ioaddr(port)) = value; + else + *(port2adr(port)) = value; +} + +void sh7751se_outb_p(unsigned char value, unsigned long port) +{ + if (PXSEG(port)) + *(volatile unsigned char *)port = value; + else if (is_pci_ioaddr(port)) + *((unsigned char*)pci_ioaddr(port)) = value; + else + *(port2adr(port)) = value; + ctrl_delay(); +} + +void sh7751se_outw(unsigned short value, unsigned long port) +{ + if (PXSEG(port)) + *(volatile unsigned short *)port = value; + else if (is_pci_ioaddr(port)) + *((unsigned short *)pci_ioaddr(port)) = value; + else if (port >= 0x2000) + *port2adr(port) = value; + else + maybebadio(port); +} + +void sh7751se_outl(unsigned int value, unsigned long port) +{ + if (PXSEG(port)) + *(volatile unsigned long *)port = value; + else if (is_pci_ioaddr(port)) + *((unsigned long*)pci_ioaddr(port)) = value; + else + maybebadio(port); +} + +void sh7751se_insl(unsigned long port, void *addr, unsigned long count) +{ + maybebadio(port); +} + +void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count) +{ + maybebadio(port); +} diff --git a/arch/sh/boards/mach-se/7751/irq.c b/arch/sh/boards/mach-se/7751/irq.c new file mode 100644 index 000000000000..c3d12590e5db --- /dev/null +++ b/arch/sh/boards/mach-se/7751/irq.c @@ -0,0 +1,50 @@ +/* + * linux/arch/sh/boards/se/7751/irq.c + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Hitachi SolutionEngine Support. + * + * Modified for 7751 Solution Engine by + * Ian da Silva and Jeremy Siegel, 2001. + */ + +#include <linux/init.h> +#include <linux/irq.h> +#include <asm/irq.h> +#include <asm/se7751.h> + +static struct ipr_data ipr_irq_table[] = { + { 13, 3, 3, 2 }, + /* Add additional entries here as drivers are added and tested. */ +}; + +static unsigned long ipr_offsets[] = { + BCR_ILCRA, + BCR_ILCRB, + BCR_ILCRC, + BCR_ILCRD, + BCR_ILCRE, + BCR_ILCRF, + BCR_ILCRG, +}; + +static struct ipr_desc ipr_irq_desc = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), + + .ipr_data = ipr_irq_table, + .nr_irqs = ARRAY_SIZE(ipr_irq_table), + + .chip = { + .name = "IPR-se7751", + }, +}; + +/* + * Initialize IRQ setting + */ +void __init init_7751se_IRQ(void) +{ + register_ipr_controller(&ipr_irq_desc); +} diff --git a/arch/sh/boards/mach-se/7751/pci.c b/arch/sh/boards/mach-se/7751/pci.c new file mode 100644 index 000000000000..203b2923fe7f --- /dev/null +++ b/arch/sh/boards/mach-se/7751/pci.c @@ -0,0 +1,147 @@ +/* + * linux/arch/sh/boards/se/7751/pci.c + * + * Author: Ian DaSilva (idasilva@mvista.com) + * + * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * PCI initialization for the Hitachi SH7751 Solution Engine board (MS7751SE01) + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pci.h> + +#include <asm/io.h> +#include "../../../drivers/pci/pci-sh7751.h" + +#define PCIMCR_MRSET_OFF 0xBFFFFFFF +#define PCIMCR_RFSH_OFF 0xFFFFFFFB + +/* + * Only long word accesses of the PCIC's internal local registers and the + * configuration registers from the CPU is supported. + */ +#define PCIC_WRITE(x,v) writel((v), PCI_REG(x)) +#define PCIC_READ(x) readl(PCI_REG(x)) + +/* + * Description: This function sets up and initializes the pcic, sets + * up the BARS, maps the DRAM into the address space etc, etc. + */ +int __init pcibios_init_platform(void) +{ + unsigned long bcr1, wcr1, wcr2, wcr3, mcr; + unsigned short bcr2; + + /* + * Initialize the slave bus controller on the pcic. The values used + * here should not be hardcoded, but they should be taken from the bsc + * on the processor, to make this function as generic as possible. + * (i.e. Another sbc may usr different SDRAM timing settings -- in order + * for the pcic to work, its settings need to be exactly the same.) + */ + bcr1 = (*(volatile unsigned long*)(SH7751_BCR1)); + bcr2 = (*(volatile unsigned short*)(SH7751_BCR2)); + wcr1 = (*(volatile unsigned long*)(SH7751_WCR1)); + wcr2 = (*(volatile unsigned long*)(SH7751_WCR2)); + wcr3 = (*(volatile unsigned long*)(SH7751_WCR3)); + mcr = (*(volatile unsigned long*)(SH7751_MCR)); + + bcr1 = bcr1 | 0x00080000; /* Enable Bit 19, BREQEN */ + (*(volatile unsigned long*)(SH7751_BCR1)) = bcr1; + + bcr1 = bcr1 | 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */ + PCIC_WRITE(SH7751_PCIBCR1, bcr1); /* PCIC BCR1 */ + PCIC_WRITE(SH7751_PCIBCR2, bcr2); /* PCIC BCR2 */ + PCIC_WRITE(SH7751_PCIWCR1, wcr1); /* PCIC WCR1 */ + PCIC_WRITE(SH7751_PCIWCR2, wcr2); /* PCIC WCR2 */ + PCIC_WRITE(SH7751_PCIWCR3, wcr3); /* PCIC WCR3 */ + mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF; + PCIC_WRITE(SH7751_PCIMCR, mcr); /* PCIC MCR */ + + + /* Enable all interrupts, so we know what to fix */ + PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff); + PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f); + + /* Set up standard PCI config registers */ + PCIC_WRITE(SH7751_PCICONF1, 0xF39000C7); /* Bus Master, Mem & I/O access */ + PCIC_WRITE(SH7751_PCICONF2, 0x00000000); /* PCI Class code & Revision ID */ + PCIC_WRITE(SH7751_PCICONF4, 0xab000001); /* PCI I/O address (local regs) */ + PCIC_WRITE(SH7751_PCICONF5, 0x0c000000); /* PCI MEM address (local RAM) */ + PCIC_WRITE(SH7751_PCICONF6, 0xd0000000); /* PCI MEM address (unused) */ + PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */ + PCIC_WRITE(SH7751_PCILSR0, 0x03f00000); /* MEM (full 64M exposed) */ + PCIC_WRITE(SH7751_PCILSR1, 0x00000000); /* MEM (unused) */ + PCIC_WRITE(SH7751_PCILAR0, 0x0c000000); /* MEM (direct map from PCI) */ + PCIC_WRITE(SH7751_PCILAR1, 0x00000000); /* MEM (unused) */ + + /* Now turn it on... */ + PCIC_WRITE(SH7751_PCICR, 0xa5000001); + + /* + * Set PCIMBR and PCIIOBR here, assuming a single window + * (16M MEM, 256K IO) is enough. If a larger space is + * needed, the readx/writex and inx/outx functions will + * have to do more (e.g. setting registers for each call). + */ + + /* + * Set the MBR so PCI address is one-to-one with window, + * meaning all calls go straight through... use BUG_ON to + * catch erroneous assumption. + */ + BUG_ON(PCIBIOS_MIN_MEM != SH7751_PCI_MEMORY_BASE); + + PCIC_WRITE(SH7751_PCIMBR, PCIBIOS_MIN_MEM); + + /* Set IOBR for window containing area specified in pci.h */ + PCIC_WRITE(SH7751_PCIIOBR, (PCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK)); + + /* All done, may as well say so... */ + printk("SH7751 PCI: Finished initialization of the PCI controller\n"); + + return 1; +} + +int __init pcibios_map_platform_irq(u8 slot, u8 pin) +{ + switch (slot) { + case 0: return 13; + case 1: return 13; /* AMD Ethernet controller */ + case 2: return -1; + case 3: return -1; + case 4: return -1; + default: + printk("PCI: Bad IRQ mapping request for slot %d\n", slot); + return -1; + } +} + +static struct resource sh7751_io_resource = { + .name = "SH7751 IO", + .start = SH7751_PCI_IO_BASE, + .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO +}; + +static struct resource sh7751_mem_resource = { + .name = "SH7751 mem", + .start = SH7751_PCI_MEMORY_BASE, + .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM +}; + +extern struct pci_ops sh7751_pci_ops; + +struct pci_channel board_pci_channels[] = { + { &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, + { NULL, NULL, NULL, 0, 0 }, +}; + diff --git a/arch/sh/boards/mach-se/7751/setup.c b/arch/sh/boards/mach-se/7751/setup.c new file mode 100644 index 000000000000..deefbfd92591 --- /dev/null +++ b/arch/sh/boards/mach-se/7751/setup.c @@ -0,0 +1,78 @@ +/* + * linux/arch/sh/boards/se/7751/setup.c + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Hitachi SolutionEngine Support. + * + * Modified for 7751 Solution Engine by + * Ian da Silva and Jeremy Siegel, 2001. + */ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <asm/machvec.h> +#include <asm/se7751.h> +#include <asm/io.h> +#include <asm/heartbeat.h> + +static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; + +static struct heartbeat_data heartbeat_data = { + .bit_pos = heartbeat_bit_pos, + .nr_bits = ARRAY_SIZE(heartbeat_bit_pos), +}; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *se7751_devices[] __initdata = { + &heartbeat_device, +}; + +static int __init se7751_devices_setup(void) +{ + return platform_add_devices(se7751_devices, ARRAY_SIZE(se7751_devices)); +} +__initcall(se7751_devices_setup); + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_7751se __initmv = { + .mv_name = "7751 SolutionEngine", + .mv_nr_irqs = 72, + + .mv_inb = sh7751se_inb, + .mv_inw = sh7751se_inw, + .mv_inl = sh7751se_inl, + .mv_outb = sh7751se_outb, + .mv_outw = sh7751se_outw, + .mv_outl = sh7751se_outl, + + .mv_inb_p = sh7751se_inb_p, + .mv_inw_p = sh7751se_inw, + .mv_inl_p = sh7751se_inl, + .mv_outb_p = sh7751se_outb_p, + .mv_outw_p = sh7751se_outw, + .mv_outl_p = sh7751se_outl, + + .mv_insl = sh7751se_insl, + .mv_outsl = sh7751se_outsl, + + .mv_init_irq = init_7751se_IRQ, +}; diff --git a/arch/sh/boards/mach-se/7780/Makefile b/arch/sh/boards/mach-se/7780/Makefile new file mode 100644 index 000000000000..6b88adae3ecc --- /dev/null +++ b/arch/sh/boards/mach-se/7780/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for the HITACHI UL SolutionEngine 7780 specific parts of the kernel +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# + +obj-y := setup.o irq.o diff --git a/arch/sh/boards/mach-se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c new file mode 100644 index 000000000000..6bd70da6bb47 --- /dev/null +++ b/arch/sh/boards/mach-se/7780/irq.c @@ -0,0 +1,46 @@ +/* + * linux/arch/sh/boards/se/7780/irq.c + * + * Copyright (C) 2006,2007 Nobuhiro Iwamatsu + * + * Hitachi UL SolutionEngine 7780 Support. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <asm/irq.h> +#include <asm/io.h> +#include <asm/se7780.h> + +/* + * Initialize IRQ setting + */ +void __init init_se7780_IRQ(void) +{ + /* enable all interrupt at FPGA */ + ctrl_outw(0, FPGA_INTMSK1); + /* mask SM501 interrupt */ + ctrl_outw((ctrl_inw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1); + /* enable all interrupt at FPGA */ + ctrl_outw(0, FPGA_INTMSK2); + + /* set FPGA INTSEL register */ + /* FPGA + 0x06 */ + ctrl_outw( ((IRQPIN_SM501 << IRQPOS_SM501) | + (IRQPIN_SMC91CX << IRQPOS_SMC91CX)), FPGA_INTSEL1); + + /* FPGA + 0x08 */ + ctrl_outw(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) | + (IRQPIN_EXTINT3 << IRQPOS_EXTINT3) | + (IRQPIN_EXTINT2 << IRQPOS_EXTINT2) | + (IRQPIN_EXTINT1 << IRQPOS_EXTINT1)), FPGA_INTSEL2); + + /* FPGA + 0x0A */ + ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3); + + plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */ +} diff --git a/arch/sh/boards/mach-se/7780/setup.c b/arch/sh/boards/mach-se/7780/setup.c new file mode 100644 index 000000000000..0f08ab3b2bec --- /dev/null +++ b/arch/sh/boards/mach-se/7780/setup.c @@ -0,0 +1,124 @@ +/* + * linux/arch/sh/boards/se/7780/setup.c + * + * Copyright (C) 2006,2007 Nobuhiro Iwamatsu + * + * Hitachi UL SolutionEngine 7780 Support. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <asm/machvec.h> +#include <asm/se7780.h> +#include <asm/io.h> +#include <asm/heartbeat.h> + +/* Heartbeat */ +static struct heartbeat_data heartbeat_data = { + .regsize = 16, +}; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +/* SMC91x */ +static struct resource smc91x_eth_resources[] = { + [0] = { + .name = "smc91x-regs" , + .start = PA_LAN + 0x300, + .end = PA_LAN + 0x300 + 0x10 , + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = SMC_IRQ, + .end = SMC_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc91x_eth_device = { + .name = "smc91x", + .id = 0, + .dev = { + .dma_mask = NULL, /* don't use dma */ + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(smc91x_eth_resources), + .resource = smc91x_eth_resources, +}; + +static struct platform_device *se7780_devices[] __initdata = { + &heartbeat_device, + &smc91x_eth_device, +}; + +static int __init se7780_devices_setup(void) +{ + return platform_add_devices(se7780_devices, + ARRAY_SIZE(se7780_devices)); +} +device_initcall(se7780_devices_setup); + +#define GPIO_PHCR 0xFFEA000E +#define GPIO_PMSELR 0xFFEA0080 +#define GPIO_PECR 0xFFEA0008 + +static void __init se7780_setup(char **cmdline_p) +{ + /* "SH-Linux" on LED Display */ + ctrl_outw( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) ); + ctrl_outw( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) ); + ctrl_outw( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) ); + ctrl_outw( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) ); + ctrl_outw( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) ); + ctrl_outw( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) ); + ctrl_outw( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) ); + ctrl_outw( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) ); + + printk(KERN_INFO "Hitachi UL Solutions Engine 7780SE03 support.\n"); + + /* + * PCI REQ/GNT setting + * REQ0/GNT0 -> USB + * REQ1/GNT1 -> PC Card + * REQ2/GNT2 -> Serial ATA + * REQ3/GNT3 -> PCI slot + */ + ctrl_outw(0x0213, FPGA_REQSEL); + + /* GPIO setting */ + ctrl_outw(0x0000, GPIO_PECR); + ctrl_outw(ctrl_inw(GPIO_PHCR)&0xfff3, GPIO_PHCR); + ctrl_outw(0x0c00, GPIO_PMSELR); + + /* iVDR Power ON */ + ctrl_outw(0x0001, FPGA_IVDRPW); +} + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_se7780 __initmv = { + .mv_name = "Solution Engine 7780" , + .mv_setup = se7780_setup , + .mv_nr_irqs = 111 , + .mv_init_irq = init_se7780_IRQ, +}; |