diff options
Diffstat (limited to 'arch/sh/boards/overdrive/irq.c')
| -rw-r--r-- | arch/sh/boards/overdrive/irq.c | 192 |
1 files changed, 192 insertions, 0 deletions
diff --git a/arch/sh/boards/overdrive/irq.c b/arch/sh/boards/overdrive/irq.c new file mode 100644 index 000000000000..23adc6be71e7 --- /dev/null +++ b/arch/sh/boards/overdrive/irq.c @@ -0,0 +1,192 @@ +/* + * Copyright (C) 2000 David J. Mckay (david.mckay@st.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Looks after interrupts on the overdrive board. + * + * Bases on the IPR irq system + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/irq.h> + +#include <asm/system.h> +#include <asm/io.h> + +#include <asm/overdrive/overdrive.h> + +struct od_data { + int overdrive_irq; + int irq_mask; +}; + +#define NUM_EXTERNAL_IRQS 16 +#define EXTERNAL_IRQ_NOT_IN_USE (-1) +#define EXTERNAL_IRQ_NOT_ASSIGNED (-1) + +/* + * This table is used to determine what to program into the FPGA's CT register + * for the specified Linux IRQ. + * + * The irq_mask gives the interrupt number from the PCI board (PCI_Int(6:0)) + * but is one greater than that because the because the FPGA treats 0 + * as disabled, a value of 1 asserts PCI_Int0, and so on. + * + * The overdrive_irq specifies which of the eight interrupt sources generates + * that interrupt, and but is multiplied by four to give the bit offset into + * the CT register. + * + * The seven interrupts levels (SH4 IRL's) we have available here is hardwired + * by the EPLD. The assignments here of which PCI interrupt generates each + * level is arbitary. + */ +static struct od_data od_data_table[NUM_EXTERNAL_IRQS] = { + /* overdrive_irq , irq_mask */ + {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}, /* 0 */ + {EXTERNAL_IRQ_NOT_ASSIGNED, 7}, /* 1 */ + {EXTERNAL_IRQ_NOT_ASSIGNED, 6}, /* 2 */ + {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}, /* 3 */ + {EXTERNAL_IRQ_NOT_ASSIGNED, 5}, /* 4 */ + {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}, /* 5 */ + {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}, /* 6 */ + {EXTERNAL_IRQ_NOT_ASSIGNED, 4}, /* 7 */ + {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}, /* 8 */ + {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}, /* 9 */ + {EXTERNAL_IRQ_NOT_ASSIGNED, 3}, /* 10 */ + {EXTERNAL_IRQ_NOT_ASSIGNED, 2}, /* 11 */ + {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}, /* 12 */ + {EXTERNAL_IRQ_NOT_ASSIGNED, 1}, /* 13 */ + {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}, /* 14 */ + {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE} /* 15 */ +}; + +static void set_od_data(int overdrive_irq, int irq) +{ + if (irq >= NUM_EXTERNAL_IRQS || irq < 0) + return; + od_data_table[irq].overdrive_irq = overdrive_irq << 2; +} + +static void enable_od_irq(unsigned int irq); +void disable_od_irq(unsigned int irq); + +/* shutdown is same as "disable" */ +#define shutdown_od_irq disable_od_irq + +static void mask_and_ack_od(unsigned int); +static void end_od_irq(unsigned int irq); + +static unsigned int startup_od_irq(unsigned int irq) +{ + enable_od_irq(irq); + return 0; /* never anything pending */ +} + +static struct hw_interrupt_type od_irq_type = { + "Overdrive-IRQ", + startup_od_irq, + shutdown_od_irq, + enable_od_irq, + disable_od_irq, + mask_and_ack_od, + end_od_irq +}; + +static void disable_od_irq(unsigned int irq) +{ + unsigned val, flags; + int overdrive_irq; + unsigned mask; + + /* Not a valid interrupt */ + if (irq < 0 || irq >= NUM_EXTERNAL_IRQS) + return; + + /* Is is necessary to use a cli here? Would a spinlock not be + * mroe efficient? + */ + local_irq_save(flags); + overdrive_irq = od_data_table[irq].overdrive_irq; + if (overdrive_irq != EXTERNAL_IRQ_NOT_ASSIGNED) { + mask = ~(0x7 << overdrive_irq); + val = ctrl_inl(OVERDRIVE_INT_CT); + val &= mask; + ctrl_outl(val, OVERDRIVE_INT_CT); + } + local_irq_restore(flags); +} + +static void enable_od_irq(unsigned int irq) +{ + unsigned val, flags; + int overdrive_irq; + unsigned mask; + + /* Not a valid interrupt */ + if (irq < 0 || irq >= NUM_EXTERNAL_IRQS) + return; + + /* Set priority in OD back to original value */ + local_irq_save(flags); + /* This one is not in use currently */ + overdrive_irq = od_data_table[irq].overdrive_irq; + if (overdrive_irq != EXTERNAL_IRQ_NOT_ASSIGNED) { + val = ctrl_inl(OVERDRIVE_INT_CT); + mask = ~(0x7 << overdrive_irq); + val &= mask; + mask = od_data_table[irq].irq_mask << overdrive_irq; + val |= mask; + ctrl_outl(val, OVERDRIVE_INT_CT); + } + local_irq_restore(flags); +} + + + +/* this functions sets the desired irq handler to be an overdrive type */ +static void __init make_od_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + irq_desc[irq].handler = &od_irq_type; + disable_od_irq(irq); +} + + +static void mask_and_ack_od(unsigned int irq) +{ + disable_od_irq(irq); +} + +static void end_od_irq(unsigned int irq) +{ + enable_od_irq(irq); +} + +void __init init_overdrive_irq(void) +{ + int i; + + /* Disable all interrupts */ + ctrl_outl(0, OVERDRIVE_INT_CT); + + /* Update interrupt pin mode to use encoded interrupts */ + i = ctrl_inw(INTC_ICR); + i &= ~INTC_ICR_IRLM; + ctrl_outw(i, INTC_ICR); + + for (i = 0; i < NUM_EXTERNAL_IRQS; i++) { + if (od_data_table[i].irq_mask != EXTERNAL_IRQ_NOT_IN_USE) { + make_od_irq(i); + } else if (i != 15) { // Cannot use imask on level 15 + make_imask_irq(i); + } + } + + /* Set up the interrupts */ + set_od_data(OVERDRIVE_PCI_INTA, OVERDRIVE_PCI_IRQ1); + set_od_data(OVERDRIVE_PCI_INTB, OVERDRIVE_PCI_IRQ2); + set_od_data(OVERDRIVE_AUDIO_INT, OVERDRIVE_ESS_IRQ); +} |