diff options
Diffstat (limited to 'arch/tile/include/arch')
| -rw-r--r-- | arch/tile/include/arch/trio.h | 39 | ||||
| -rw-r--r-- | arch/tile/include/arch/uart.h | 300 | ||||
| -rw-r--r-- | arch/tile/include/arch/uart_def.h | 120 |
3 files changed, 459 insertions, 0 deletions
diff --git a/arch/tile/include/arch/trio.h b/arch/tile/include/arch/trio.h index d3000a871a21..c0ddedcae085 100644 --- a/arch/tile/include/arch/trio.h +++ b/arch/tile/include/arch/trio.h @@ -23,6 +23,45 @@ #ifndef __ASSEMBLER__ /* + * Map SQ Doorbell Format. + * This describes the format of the write-only doorbell register that exists + * in the last 8-bytes of the MAP_SQ_BASE/LIM range. This register is only + * writable from PCIe space. Writes to this register will not be written to + * Tile memory space and thus no IO VA translation is required if the last + * page of the BASE/LIM range is not otherwise written. + */ + +__extension__ +typedef union +{ + struct + { +#ifndef __BIG_ENDIAN__ + /* + * When written with a 1, the associated MAP_SQ region's doorbell + * interrupt will be triggered once all previous writes are visible to + * Tile software. + */ + uint_reg_t doorbell : 1; + /* + * When written with a 1, the descriptor at the head of the associated + * MAP_SQ's FIFO will be dequeued. + */ + uint_reg_t pop : 1; + /* Reserved. */ + uint_reg_t __reserved : 62; +#else /* __BIG_ENDIAN__ */ + uint_reg_t __reserved : 62; + uint_reg_t pop : 1; + uint_reg_t doorbell : 1; +#endif + }; + + uint_reg_t word; +} TRIO_MAP_SQ_DOORBELL_FMT_t; + + +/* * Tile PIO Region Configuration - CFG Address Format. * This register describes the address format for PIO accesses when the * associated region is setup with TYPE=CFG. diff --git a/arch/tile/include/arch/uart.h b/arch/tile/include/arch/uart.h new file mode 100644 index 000000000000..07966970adad --- /dev/null +++ b/arch/tile/include/arch/uart.h @@ -0,0 +1,300 @@ +/* + * Copyright 2013 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* Machine-generated file; do not edit. */ + +#ifndef __ARCH_UART_H__ +#define __ARCH_UART_H__ + +#include <arch/abi.h> +#include <arch/uart_def.h> + +#ifndef __ASSEMBLER__ + +/* Divisor. */ + +__extension__ +typedef union +{ + struct + { +#ifndef __BIG_ENDIAN__ + /* + * Baud Rate Divisor. Desired_baud_rate = REF_CLK frequency / (baud * + * 16). + * Note: REF_CLK is always 125 MHz, the default + * divisor = 68, baud rate = 125M/(68*16) = 115200 baud. + */ + uint_reg_t divisor : 12; + /* Reserved. */ + uint_reg_t __reserved : 52; +#else /* __BIG_ENDIAN__ */ + uint_reg_t __reserved : 52; + uint_reg_t divisor : 12; +#endif + }; + + uint_reg_t word; +} UART_DIVISOR_t; + +/* FIFO Count. */ + +__extension__ +typedef union +{ + struct + { +#ifndef __BIG_ENDIAN__ + /* + * n: n active entries in the receive FIFO (max is 2**8). Each entry has + * 8 bits. + * 0: no active entry in the receive FIFO (that is empty). + */ + uint_reg_t rfifo_count : 9; + /* Reserved. */ + uint_reg_t __reserved_0 : 7; + /* + * n: n active entries in the transmit FIFO (max is 2**8). Each entry has + * 8 bits. + * 0: no active entry in the transmit FIFO (that is empty). + */ + uint_reg_t tfifo_count : 9; + /* Reserved. */ + uint_reg_t __reserved_1 : 7; + /* + * n: n active entries in the write FIFO (max is 2**2). Each entry has 8 + * bits. + * 0: no active entry in the write FIFO (that is empty). + */ + uint_reg_t wfifo_count : 3; + /* Reserved. */ + uint_reg_t __reserved_2 : 29; +#else /* __BIG_ENDIAN__ */ + uint_reg_t __reserved_2 : 29; + uint_reg_t wfifo_count : 3; + uint_reg_t __reserved_1 : 7; + uint_reg_t tfifo_count : 9; + uint_reg_t __reserved_0 : 7; + uint_reg_t rfifo_count : 9; +#endif + }; + + uint_reg_t word; +} UART_FIFO_COUNT_t; + +/* FLAG. */ + +__extension__ +typedef union +{ + struct + { +#ifndef __BIG_ENDIAN__ + /* Reserved. */ + uint_reg_t __reserved_0 : 1; + /* 1: receive FIFO is empty */ + uint_reg_t rfifo_empty : 1; + /* 1: write FIFO is empty. */ + uint_reg_t wfifo_empty : 1; + /* 1: transmit FIFO is empty. */ + uint_reg_t tfifo_empty : 1; + /* 1: receive FIFO is full. */ + uint_reg_t rfifo_full : 1; + /* 1: write FIFO is full. */ + uint_reg_t wfifo_full : 1; + /* 1: transmit FIFO is full. */ + uint_reg_t tfifo_full : 1; + /* Reserved. */ + uint_reg_t __reserved_1 : 57; +#else /* __BIG_ENDIAN__ */ + uint_reg_t __reserved_1 : 57; + uint_reg_t tfifo_full : 1; + uint_reg_t wfifo_full : 1; + uint_reg_t rfifo_full : 1; + uint_reg_t tfifo_empty : 1; + uint_reg_t wfifo_empty : 1; + uint_reg_t rfifo_empty : 1; + uint_reg_t __reserved_0 : 1; +#endif + }; + + uint_reg_t word; +} UART_FLAG_t; + +/* + * Interrupt Vector Mask. + * Each bit in this register corresponds to a specific interrupt. When set, + * the associated interrupt will not be dispatched. + */ + +__extension__ +typedef union +{ + struct + { +#ifndef __BIG_ENDIAN__ + /* Read data FIFO read and no data available */ + uint_reg_t rdat_err : 1; + /* Write FIFO was written but it was full */ + uint_reg_t wdat_err : 1; + /* Stop bit not found when current data was received */ + uint_reg_t frame_err : 1; + /* Parity error was detected when current data was received */ + uint_reg_t parity_err : 1; + /* Data was received but the receive FIFO was full */ + uint_reg_t rfifo_overflow : 1; + /* + * An almost full event is reached when data is to be written to the + * receive FIFO, and the receive FIFO has more than or equal to + * BUFFER_THRESHOLD.RFIFO_AFULL bytes. + */ + uint_reg_t rfifo_afull : 1; + /* Reserved. */ + uint_reg_t __reserved_0 : 1; + /* An entry in the transmit FIFO was popped */ + uint_reg_t tfifo_re : 1; + /* An entry has been pushed into the receive FIFO */ + uint_reg_t rfifo_we : 1; + /* An entry of the write FIFO has been popped */ + uint_reg_t wfifo_re : 1; + /* Rshim read receive FIFO in protocol mode */ + uint_reg_t rfifo_err : 1; + /* + * An almost empty event is reached when data is to be read from the + * transmit FIFO, and the transmit FIFO has less than or equal to + * BUFFER_THRESHOLD.TFIFO_AEMPTY bytes. + */ + uint_reg_t tfifo_aempty : 1; + /* Reserved. */ + uint_reg_t __reserved_1 : 52; +#else /* __BIG_ENDIAN__ */ + uint_reg_t __reserved_1 : 52; + uint_reg_t tfifo_aempty : 1; + uint_reg_t rfifo_err : 1; + uint_reg_t wfifo_re : 1; + uint_reg_t rfifo_we : 1; + uint_reg_t tfifo_re : 1; + uint_reg_t __reserved_0 : 1; + uint_reg_t rfifo_afull : 1; + uint_reg_t rfifo_overflow : 1; + uint_reg_t parity_err : 1; + uint_reg_t frame_err : 1; + uint_reg_t wdat_err : 1; + uint_reg_t rdat_err : 1; +#endif + }; + + uint_reg_t word; +} UART_INTERRUPT_MASK_t; + +/* + * Interrupt vector, write-one-to-clear. + * Each bit in this register corresponds to a specific interrupt. Hardware + * sets the bit when the associated condition has occurred. Writing a 1 + * clears the status bit. + */ + +__extension__ +typedef union +{ + struct + { +#ifndef __BIG_ENDIAN__ + /* Read data FIFO read and no data available */ + uint_reg_t rdat_err : 1; + /* Write FIFO was written but it was full */ + uint_reg_t wdat_err : 1; + /* Stop bit not found when current data was received */ + uint_reg_t frame_err : 1; + /* Parity error was detected when current data was received */ + uint_reg_t parity_err : 1; + /* Data was received but the receive FIFO was full */ + uint_reg_t rfifo_overflow : 1; + /* + * Data was received and the receive FIFO is now almost full (more than + * BUFFER_THRESHOLD.RFIFO_AFULL bytes in it) + */ + uint_reg_t rfifo_afull : 1; + /* Reserved. */ + uint_reg_t __reserved_0 : 1; + /* An entry in the transmit FIFO was popped */ + uint_reg_t tfifo_re : 1; + /* An entry has been pushed into the receive FIFO */ + uint_reg_t rfifo_we : 1; + /* An entry of the write FIFO has been popped */ + uint_reg_t wfifo_re : 1; + /* Rshim read receive FIFO in protocol mode */ + uint_reg_t rfifo_err : 1; + /* + * Data was read from the transmit FIFO and now it is almost empty (less + * than or equal to BUFFER_THRESHOLD.TFIFO_AEMPTY bytes in it). + */ + uint_reg_t tfifo_aempty : 1; + /* Reserved. */ + uint_reg_t __reserved_1 : 52; +#else /* __BIG_ENDIAN__ */ + uint_reg_t __reserved_1 : 52; + uint_reg_t tfifo_aempty : 1; + uint_reg_t rfifo_err : 1; + uint_reg_t wfifo_re : 1; + uint_reg_t rfifo_we : 1; + uint_reg_t tfifo_re : 1; + uint_reg_t __reserved_0 : 1; + uint_reg_t rfifo_afull : 1; + uint_reg_t rfifo_overflow : 1; + uint_reg_t parity_err : 1; + uint_reg_t frame_err : 1; + uint_reg_t wdat_err : 1; + uint_reg_t rdat_err : 1; +#endif + }; + + uint_reg_t word; +} UART_INTERRUPT_STATUS_t; + +/* Type. */ + +__extension__ +typedef union +{ + struct + { +#ifndef __BIG_ENDIAN__ + /* Number of stop bits, rx and tx */ + uint_reg_t sbits : 1; + /* Reserved. */ + uint_reg_t __reserved_0 : 1; + /* Data word size, rx and tx */ + uint_reg_t dbits : 1; + /* Reserved. */ + uint_reg_t __reserved_1 : 1; + /* Parity selection, rx and tx */ + uint_reg_t ptype : 3; + /* Reserved. */ + uint_reg_t __reserved_2 : 57; +#else /* __BIG_ENDIAN__ */ + uint_reg_t __reserved_2 : 57; + uint_reg_t ptype : 3; + uint_reg_t __reserved_1 : 1; + uint_reg_t dbits : 1; + uint_reg_t __reserved_0 : 1; + uint_reg_t sbits : 1; +#endif + }; + + uint_reg_t word; +} UART_TYPE_t; +#endif /* !defined(__ASSEMBLER__) */ + +#endif /* !defined(__ARCH_UART_H__) */ diff --git a/arch/tile/include/arch/uart_def.h b/arch/tile/include/arch/uart_def.h new file mode 100644 index 000000000000..42bcaf535379 --- /dev/null +++ b/arch/tile/include/arch/uart_def.h @@ -0,0 +1,120 @@ +/* + * Copyright 2013 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* Machine-generated file; do not edit. */ + +#ifndef __ARCH_UART_DEF_H__ +#define __ARCH_UART_DEF_H__ +#define UART_DIVISOR 0x0158 +#define UART_FIFO_COUNT 0x0110 +#define UART_FLAG 0x0108 +#define UART_INTERRUPT_MASK 0x0208 +#define UART_INTERRUPT_MASK__RDAT_ERR_SHIFT 0 +#define UART_INTERRUPT_MASK__RDAT_ERR_WIDTH 1 +#define UART_INTERRUPT_MASK__RDAT_ERR_RESET_VAL 1 +#define UART_INTERRUPT_MASK__RDAT_ERR_RMASK 0x1 +#define UART_INTERRUPT_MASK__RDAT_ERR_MASK 0x1 +#define UART_INTERRUPT_MASK__RDAT_ERR_FIELD 0,0 +#define UART_INTERRUPT_MASK__WDAT_ERR_SHIFT 1 +#define UART_INTERRUPT_MASK__WDAT_ERR_WIDTH 1 +#define UART_INTERRUPT_MASK__WDAT_ERR_RESET_VAL 1 +#define UART_INTERRUPT_MASK__WDAT_ERR_RMASK 0x1 +#define UART_INTERRUPT_MASK__WDAT_ERR_MASK 0x2 +#define UART_INTERRUPT_MASK__WDAT_ERR_FIELD 1,1 +#define UART_INTERRUPT_MASK__FRAME_ERR_SHIFT 2 +#define UART_INTERRUPT_MASK__FRAME_ERR_WIDTH 1 +#define UART_INTERRUPT_MASK__FRAME_ERR_RESET_VAL 1 +#define UART_INTERRUPT_MASK__FRAME_ERR_RMASK 0x1 +#define UART_INTERRUPT_MASK__FRAME_ERR_MASK 0x4 +#define UART_INTERRUPT_MASK__FRAME_ERR_FIELD 2,2 +#define UART_INTERRUPT_MASK__PARITY_ERR_SHIFT 3 +#define UART_INTERRUPT_MASK__PARITY_ERR_WIDTH 1 +#define UART_INTERRUPT_MASK__PARITY_ERR_RESET_VAL 1 +#define UART_INTERRUPT_MASK__PARITY_ERR_RMASK 0x1 +#define UART_INTERRUPT_MASK__PARITY_ERR_MASK 0x8 +#define UART_INTERRUPT_MASK__PARITY_ERR_FIELD 3,3 +#define UART_INTERRUPT_MASK__RFIFO_OVERFLOW_SHIFT 4 +#define UART_INTERRUPT_MASK__RFIFO_OVERFLOW_WIDTH 1 +#define UART_INTERRUPT_MASK__RFIFO_OVERFLOW_RESET_VAL 1 +#define UART_INTERRUPT_MASK__RFIFO_OVERFLOW_RMASK 0x1 +#define UART_INTERRUPT_MASK__RFIFO_OVERFLOW_MASK 0x10 +#define UART_INTERRUPT_MASK__RFIFO_OVERFLOW_FIELD 4,4 +#define UART_INTERRUPT_MASK__RFIFO_AFULL_SHIFT 5 +#define UART_INTERRUPT_MASK__RFIFO_AFULL_WIDTH 1 +#define UART_INTERRUPT_MASK__RFIFO_AFULL_RESET_VAL 1 +#define UART_INTERRUPT_MASK__RFIFO_AFULL_RMASK 0x1 +#define UART_INTERRUPT_MASK__RFIFO_AFULL_MASK 0x20 +#define UART_INTERRUPT_MASK__RFIFO_AFULL_FIELD 5,5 +#define UART_INTERRUPT_MASK__TFIFO_RE_SHIFT 7 +#define UART_INTERRUPT_MASK__TFIFO_RE_WIDTH 1 +#define UART_INTERRUPT_MASK__TFIFO_RE_RESET_VAL 1 +#define UART_INTERRUPT_MASK__TFIFO_RE_RMASK 0x1 +#define UART_INTERRUPT_MASK__TFIFO_RE_MASK 0x80 +#define UART_INTERRUPT_MASK__TFIFO_RE_FIELD 7,7 +#define UART_INTERRUPT_MASK__RFIFO_WE_SHIFT 8 +#define UART_INTERRUPT_MASK__RFIFO_WE_WIDTH 1 +#define UART_INTERRUPT_MASK__RFIFO_WE_RESET_VAL 1 +#define UART_INTERRUPT_MASK__RFIFO_WE_RMASK 0x1 +#define UART_INTERRUPT_MASK__RFIFO_WE_MASK 0x100 +#define UART_INTERRUPT_MASK__RFIFO_WE_FIELD 8,8 +#define UART_INTERRUPT_MASK__WFIFO_RE_SHIFT 9 +#define UART_INTERRUPT_MASK__WFIFO_RE_WIDTH 1 +#define UART_INTERRUPT_MASK__WFIFO_RE_RESET_VAL 1 +#define UART_INTERRUPT_MASK__WFIFO_RE_RMASK 0x1 +#define UART_INTERRUPT_MASK__WFIFO_RE_MASK 0x200 +#define UART_INTERRUPT_MASK__WFIFO_RE_FIELD 9,9 +#define UART_INTERRUPT_MASK__RFIFO_ERR_SHIFT 10 +#define UART_INTERRUPT_MASK__RFIFO_ERR_WIDTH 1 +#define UART_INTERRUPT_MASK__RFIFO_ERR_RESET_VAL 1 +#define UART_INTERRUPT_MASK__RFIFO_ERR_RMASK 0x1 +#define UART_INTERRUPT_MASK__RFIFO_ERR_MASK 0x400 +#define UART_INTERRUPT_MASK__RFIFO_ERR_FIELD 10,10 +#define UART_INTERRUPT_MASK__TFIFO_AEMPTY_SHIFT 11 +#define UART_INTERRUPT_MASK__TFIFO_AEMPTY_WIDTH 1 +#define UART_INTERRUPT_MASK__TFIFO_AEMPTY_RESET_VAL 1 +#define UART_INTERRUPT_MASK__TFIFO_AEMPTY_RMASK 0x1 +#define UART_INTERRUPT_MASK__TFIFO_AEMPTY_MASK 0x800 +#define UART_INTERRUPT_MASK__TFIFO_AEMPTY_FIELD 11,11 +#define UART_INTERRUPT_STATUS 0x0200 +#define UART_RECEIVE_DATA 0x0148 +#define UART_TRANSMIT_DATA 0x0140 +#define UART_TYPE 0x0160 +#define UART_TYPE__SBITS_SHIFT 0 +#define UART_TYPE__SBITS_WIDTH 1 +#define UART_TYPE__SBITS_RESET_VAL 1 +#define UART_TYPE__SBITS_RMASK 0x1 +#define UART_TYPE__SBITS_MASK 0x1 +#define UART_TYPE__SBITS_FIELD 0,0 +#define UART_TYPE__SBITS_VAL_ONE_SBITS 0x0 +#define UART_TYPE__SBITS_VAL_TWO_SBITS 0x1 +#define UART_TYPE__DBITS_SHIFT 2 +#define UART_TYPE__DBITS_WIDTH 1 +#define UART_TYPE__DBITS_RESET_VAL 0 +#define UART_TYPE__DBITS_RMASK 0x1 +#define UART_TYPE__DBITS_MASK 0x4 +#define UART_TYPE__DBITS_FIELD 2,2 +#define UART_TYPE__DBITS_VAL_EIGHT_DBITS 0x0 +#define UART_TYPE__DBITS_VAL_SEVEN_DBITS 0x1 +#define UART_TYPE__PTYPE_SHIFT 4 +#define UART_TYPE__PTYPE_WIDTH 3 +#define UART_TYPE__PTYPE_RESET_VAL 3 +#define UART_TYPE__PTYPE_RMASK 0x7 +#define UART_TYPE__PTYPE_MASK 0x70 +#define UART_TYPE__PTYPE_FIELD 4,6 +#define UART_TYPE__PTYPE_VAL_NONE 0x0 +#define UART_TYPE__PTYPE_VAL_MARK 0x1 +#define UART_TYPE__PTYPE_VAL_SPACE 0x2 +#define UART_TYPE__PTYPE_VAL_EVEN 0x3 +#define UART_TYPE__PTYPE_VAL_ODD 0x4 +#endif /* !defined(__ARCH_UART_DEF_H__) */ |