diff options
Diffstat (limited to 'arch/tile/include/hv/hypervisor.h')
| -rw-r--r-- | arch/tile/include/hv/hypervisor.h | 2656 |
1 files changed, 0 insertions, 2656 deletions
diff --git a/arch/tile/include/hv/hypervisor.h b/arch/tile/include/hv/hypervisor.h deleted file mode 100644 index f10b332b3b65..000000000000 --- a/arch/tile/include/hv/hypervisor.h +++ /dev/null @@ -1,2656 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/** - * @file hypervisor.h - * The hypervisor's public API. - */ - -#ifndef _HV_HV_H -#define _HV_HV_H - -#include <arch/chip.h> - -/* Linux builds want unsigned long constants, but assembler wants numbers */ -#ifdef __ASSEMBLER__ -/** One, for assembler */ -#define __HV_SIZE_ONE 1 -#elif !defined(__tile__) && CHIP_VA_WIDTH() > 32 -/** One, for 64-bit on host */ -#define __HV_SIZE_ONE 1ULL -#else -/** One, for Linux */ -#define __HV_SIZE_ONE 1UL -#endif - -/** The log2 of the span of a level-1 page table, in bytes. - */ -#define HV_LOG2_L1_SPAN 32 - -/** The span of a level-1 page table, in bytes. - */ -#define HV_L1_SPAN (__HV_SIZE_ONE << HV_LOG2_L1_SPAN) - -/** The log2 of the initial size of small pages, in bytes. - * See HV_DEFAULT_PAGE_SIZE_SMALL. - */ -#define HV_LOG2_DEFAULT_PAGE_SIZE_SMALL 16 - -/** The initial size of small pages, in bytes. This value should be verified - * at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_SMALL). - * It may also be modified when installing a new context. - */ -#define HV_DEFAULT_PAGE_SIZE_SMALL \ - (__HV_SIZE_ONE << HV_LOG2_DEFAULT_PAGE_SIZE_SMALL) - -/** The log2 of the initial size of large pages, in bytes. - * See HV_DEFAULT_PAGE_SIZE_LARGE. - */ -#define HV_LOG2_DEFAULT_PAGE_SIZE_LARGE 24 - -/** The initial size of large pages, in bytes. This value should be verified - * at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_LARGE). - * It may also be modified when installing a new context. - */ -#define HV_DEFAULT_PAGE_SIZE_LARGE \ - (__HV_SIZE_ONE << HV_LOG2_DEFAULT_PAGE_SIZE_LARGE) - -#if CHIP_VA_WIDTH() > 32 - -/** The log2 of the initial size of jumbo pages, in bytes. - * See HV_DEFAULT_PAGE_SIZE_JUMBO. - */ -#define HV_LOG2_DEFAULT_PAGE_SIZE_JUMBO 32 - -/** The initial size of jumbo pages, in bytes. This value should - * be verified at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_JUMBO). - * It may also be modified when installing a new context. - */ -#define HV_DEFAULT_PAGE_SIZE_JUMBO \ - (__HV_SIZE_ONE << HV_LOG2_DEFAULT_PAGE_SIZE_JUMBO) - -#endif - -/** The log2 of the granularity at which page tables must be aligned; - * in other words, the CPA for a page table must have this many zero - * bits at the bottom of the address. - */ -#define HV_LOG2_PAGE_TABLE_ALIGN 11 - -/** The granularity at which page tables must be aligned. - */ -#define HV_PAGE_TABLE_ALIGN (__HV_SIZE_ONE << HV_LOG2_PAGE_TABLE_ALIGN) - -/** Normal start of hypervisor glue in client physical memory. */ -#define HV_GLUE_START_CPA 0x10000 - -/** This much space is reserved at HV_GLUE_START_CPA - * for the hypervisor glue. The client program must start at - * some address higher than this, and in particular the address of - * its text section should be equal to zero modulo HV_PAGE_SIZE_LARGE - * so that relative offsets to the HV glue are correct. - */ -#define HV_GLUE_RESERVED_SIZE 0x10000 - -/** Each entry in the hv dispatch array takes this many bytes. */ -#define HV_DISPATCH_ENTRY_SIZE 32 - -/** Version of the hypervisor interface defined by this file */ -#define _HV_VERSION 13 - -/** Last version of the hypervisor interface with old hv_init() ABI. - * - * The change from version 12 to version 13 corresponds to launching - * the client by default at PL2 instead of PL1 (corresponding to the - * hv itself running at PL3 instead of PL2). To make this explicit, - * the hv_init() API was also extended so the client can report its - * desired PL, resulting in a more helpful failure diagnostic. If you - * call hv_init() with _HV_VERSION_OLD_HV_INIT and omit the client_pl - * argument, the hypervisor will assume client_pl = 1. - * - * Note that this is a deprecated solution and we do not expect to - * support clients of the Tilera hypervisor running at PL1 indefinitely. - */ -#define _HV_VERSION_OLD_HV_INIT 12 - -/* Index into hypervisor interface dispatch code blocks. - * - * Hypervisor calls are invoked from user space by calling code - * at an address HV_BASE_ADDRESS + (index) * HV_DISPATCH_ENTRY_SIZE, - * where index is one of these enum values. - * - * Normally a supervisor is expected to produce a set of symbols - * starting at HV_BASE_ADDRESS that obey this convention, but a user - * program could call directly through function pointers if desired. - * - * These numbers are part of the binary API and will not be changed - * without updating HV_VERSION, which should be a rare event. - */ - -/** reserved. */ -#define _HV_DISPATCH_RESERVED 0 - -/** hv_init */ -#define HV_DISPATCH_INIT 1 - -/** hv_install_context */ -#define HV_DISPATCH_INSTALL_CONTEXT 2 - -/** hv_sysconf */ -#define HV_DISPATCH_SYSCONF 3 - -/** hv_get_rtc */ -#define HV_DISPATCH_GET_RTC 4 - -/** hv_set_rtc */ -#define HV_DISPATCH_SET_RTC 5 - -/** hv_flush_asid */ -#define HV_DISPATCH_FLUSH_ASID 6 - -/** hv_flush_page */ -#define HV_DISPATCH_FLUSH_PAGE 7 - -/** hv_flush_pages */ -#define HV_DISPATCH_FLUSH_PAGES 8 - -/** hv_restart */ -#define HV_DISPATCH_RESTART 9 - -/** hv_halt */ -#define HV_DISPATCH_HALT 10 - -/** hv_power_off */ -#define HV_DISPATCH_POWER_OFF 11 - -/** hv_inquire_physical */ -#define HV_DISPATCH_INQUIRE_PHYSICAL 12 - -/** hv_inquire_memory_controller */ -#define HV_DISPATCH_INQUIRE_MEMORY_CONTROLLER 13 - -/** hv_inquire_virtual */ -#define HV_DISPATCH_INQUIRE_VIRTUAL 14 - -/** hv_inquire_asid */ -#define HV_DISPATCH_INQUIRE_ASID 15 - -/** hv_nanosleep */ -#define HV_DISPATCH_NANOSLEEP 16 - -/** hv_console_read_if_ready */ -#define HV_DISPATCH_CONSOLE_READ_IF_READY 17 - -/** hv_console_write */ -#define HV_DISPATCH_CONSOLE_WRITE 18 - -/** hv_downcall_dispatch */ -#define HV_DISPATCH_DOWNCALL_DISPATCH 19 - -/** hv_inquire_topology */ -#define HV_DISPATCH_INQUIRE_TOPOLOGY 20 - -/** hv_fs_findfile */ -#define HV_DISPATCH_FS_FINDFILE 21 - -/** hv_fs_fstat */ -#define HV_DISPATCH_FS_FSTAT 22 - -/** hv_fs_pread */ -#define HV_DISPATCH_FS_PREAD 23 - -/** hv_physaddr_read64 */ -#define HV_DISPATCH_PHYSADDR_READ64 24 - -/** hv_physaddr_write64 */ -#define HV_DISPATCH_PHYSADDR_WRITE64 25 - -/** hv_get_command_line */ -#define HV_DISPATCH_GET_COMMAND_LINE 26 - -/** hv_set_caching */ -#define HV_DISPATCH_SET_CACHING 27 - -/** hv_bzero_page */ -#define HV_DISPATCH_BZERO_PAGE 28 - -/** hv_register_message_state */ -#define HV_DISPATCH_REGISTER_MESSAGE_STATE 29 - -/** hv_send_message */ -#define HV_DISPATCH_SEND_MESSAGE 30 - -/** hv_receive_message */ -#define HV_DISPATCH_RECEIVE_MESSAGE 31 - -/** hv_inquire_context */ -#define HV_DISPATCH_INQUIRE_CONTEXT 32 - -/** hv_start_all_tiles */ -#define HV_DISPATCH_START_ALL_TILES 33 - -/** hv_dev_open */ -#define HV_DISPATCH_DEV_OPEN 34 - -/** hv_dev_close */ -#define HV_DISPATCH_DEV_CLOSE 35 - -/** hv_dev_pread */ -#define HV_DISPATCH_DEV_PREAD 36 - -/** hv_dev_pwrite */ -#define HV_DISPATCH_DEV_PWRITE 37 - -/** hv_dev_poll */ -#define HV_DISPATCH_DEV_POLL 38 - -/** hv_dev_poll_cancel */ -#define HV_DISPATCH_DEV_POLL_CANCEL 39 - -/** hv_dev_preada */ -#define HV_DISPATCH_DEV_PREADA 40 - -/** hv_dev_pwritea */ -#define HV_DISPATCH_DEV_PWRITEA 41 - -/** hv_flush_remote */ -#define HV_DISPATCH_FLUSH_REMOTE 42 - -/** hv_console_putc */ -#define HV_DISPATCH_CONSOLE_PUTC 43 - -/** hv_inquire_tiles */ -#define HV_DISPATCH_INQUIRE_TILES 44 - -/** hv_confstr */ -#define HV_DISPATCH_CONFSTR 45 - -/** hv_reexec */ -#define HV_DISPATCH_REEXEC 46 - -/** hv_set_command_line */ -#define HV_DISPATCH_SET_COMMAND_LINE 47 - -#if !CHIP_HAS_IPI() - -/** hv_clear_intr */ -#define HV_DISPATCH_CLEAR_INTR 48 - -/** hv_enable_intr */ -#define HV_DISPATCH_ENABLE_INTR 49 - -/** hv_disable_intr */ -#define HV_DISPATCH_DISABLE_INTR 50 - -/** hv_raise_intr */ -#define HV_DISPATCH_RAISE_INTR 51 - -/** hv_trigger_ipi */ -#define HV_DISPATCH_TRIGGER_IPI 52 - -#endif /* !CHIP_HAS_IPI() */ - -/** hv_store_mapping */ -#define HV_DISPATCH_STORE_MAPPING 53 - -/** hv_inquire_realpa */ -#define HV_DISPATCH_INQUIRE_REALPA 54 - -/** hv_flush_all */ -#define HV_DISPATCH_FLUSH_ALL 55 - -#if CHIP_HAS_IPI() -/** hv_get_ipi_pte */ -#define HV_DISPATCH_GET_IPI_PTE 56 -#endif - -/** hv_set_pte_super_shift */ -#define HV_DISPATCH_SET_PTE_SUPER_SHIFT 57 - -/** hv_console_set_ipi */ -#define HV_DISPATCH_CONSOLE_SET_IPI 63 - -/** hv_send_nmi */ -#define HV_DISPATCH_SEND_NMI 65 - -/** One more than the largest dispatch value */ -#define _HV_DISPATCH_END 66 - - -#ifndef __ASSEMBLER__ - -#ifdef __KERNEL__ -#include <asm/types.h> -typedef u32 __hv32; /**< 32-bit value */ -typedef u64 __hv64; /**< 64-bit value */ -#else -#include <stdint.h> -typedef uint32_t __hv32; /**< 32-bit value */ -typedef uint64_t __hv64; /**< 64-bit value */ -#endif - - -/** Hypervisor physical address. */ -typedef __hv64 HV_PhysAddr; - -#if CHIP_VA_WIDTH() > 32 -/** Hypervisor virtual address. */ -typedef __hv64 HV_VirtAddr; -#else -/** Hypervisor virtual address. */ -typedef __hv32 HV_VirtAddr; -#endif /* CHIP_VA_WIDTH() > 32 */ - -/** Hypervisor ASID. */ -typedef unsigned int HV_ASID; - -/** Hypervisor tile location for a memory access - * ("location overridden target"). - */ -typedef unsigned int HV_LOTAR; - -/** Hypervisor size of a page. */ -typedef unsigned long HV_PageSize; - -/** A page table entry. - */ -typedef struct -{ - __hv64 val; /**< Value of PTE */ -} HV_PTE; - -/** Hypervisor error code. */ -typedef int HV_Errno; - -#endif /* !__ASSEMBLER__ */ - -#define HV_OK 0 /**< No error */ -#define HV_EINVAL -801 /**< Invalid argument */ -#define HV_ENODEV -802 /**< No such device */ -#define HV_ENOENT -803 /**< No such file or directory */ -#define HV_EBADF -804 /**< Bad file number */ -#define HV_EFAULT -805 /**< Bad address */ -#define HV_ERECIP -806 /**< Bad recipients */ -#define HV_E2BIG -807 /**< Message too big */ -#define HV_ENOTSUP -808 /**< Service not supported */ -#define HV_EBUSY -809 /**< Device busy */ -#define HV_ENOSYS -810 /**< Invalid syscall */ -#define HV_EPERM -811 /**< No permission */ -#define HV_ENOTREADY -812 /**< Device not ready */ -#define HV_EIO -813 /**< I/O error */ -#define HV_ENOMEM -814 /**< Out of memory */ -#define HV_EAGAIN -815 /**< Try again */ - -#define HV_ERR_MAX -801 /**< Largest HV error code */ -#define HV_ERR_MIN -815 /**< Smallest HV error code */ - -#ifndef __ASSEMBLER__ - -/** Pass HV_VERSION to hv_init to request this version of the interface. */ -typedef enum { - HV_VERSION = _HV_VERSION, - HV_VERSION_OLD_HV_INIT = _HV_VERSION_OLD_HV_INIT, - -} HV_VersionNumber; - -/** Initializes the hypervisor. - * - * @param interface_version_number The version of the hypervisor interface - * that this program expects, typically HV_VERSION. - * @param chip_num Architecture number of the chip the client was built for. - * @param chip_rev_num Revision number of the chip the client was built for. - * @param client_pl Privilege level the client is built for - * (not required if interface_version_number == HV_VERSION_OLD_HV_INIT). - */ -void hv_init(HV_VersionNumber interface_version_number, - int chip_num, int chip_rev_num, int client_pl); - - -/** Queries we can make for hv_sysconf(). - * - * These numbers are part of the binary API and guaranteed not to change. - */ -typedef enum { - /** An invalid value; do not use. */ - _HV_SYSCONF_RESERVED = 0, - - /** The length of the glue section containing the hv_ procs, in bytes. */ - HV_SYSCONF_GLUE_SIZE = 1, - - /** The size of small pages, in bytes. */ - HV_SYSCONF_PAGE_SIZE_SMALL = 2, - - /** The size of large pages, in bytes. */ - HV_SYSCONF_PAGE_SIZE_LARGE = 3, - - /** Processor clock speed, in hertz. */ - HV_SYSCONF_CPU_SPEED = 4, - - /** Processor temperature, in degrees Kelvin. The value - * HV_SYSCONF_TEMP_KTOC may be subtracted from this to get degrees - * Celsius. If that Celsius value is HV_SYSCONF_OVERTEMP, this indicates - * that the temperature has hit an upper limit and is no longer being - * accurately tracked. - */ - HV_SYSCONF_CPU_TEMP = 5, - - /** Board temperature, in degrees Kelvin. The value - * HV_SYSCONF_TEMP_KTOC may be subtracted from this to get degrees - * Celsius. If that Celsius value is HV_SYSCONF_OVERTEMP, this indicates - * that the temperature has hit an upper limit and is no longer being - * accurately tracked. - */ - HV_SYSCONF_BOARD_TEMP = 6, - - /** Legal page size bitmask for hv_install_context(). - * For example, if 16KB and 64KB small pages are supported, - * it would return "HV_CTX_PG_SM_16K | HV_CTX_PG_SM_64K". - */ - HV_SYSCONF_VALID_PAGE_SIZES = 7, - - /** The size of jumbo pages, in bytes. - * If no jumbo pages are available, zero will be returned. - */ - HV_SYSCONF_PAGE_SIZE_JUMBO = 8, - -} HV_SysconfQuery; - -/** Offset to subtract from returned Kelvin temperature to get degrees - Celsius. */ -#define HV_SYSCONF_TEMP_KTOC 273 - -/** Pseudo-temperature value indicating that the temperature has - * pegged at its upper limit and is no longer accurate; note that this is - * the value after subtracting HV_SYSCONF_TEMP_KTOC. */ -#define HV_SYSCONF_OVERTEMP 999 - -/** Query a configuration value from the hypervisor. - * @param query Which value is requested (HV_SYSCONF_xxx). - * @return The requested value, or -1 the requested value is illegal or - * unavailable. - */ -long hv_sysconf(HV_SysconfQuery query); - - -/** Queries we can make for hv_confstr(). - * - * These numbers are part of the binary API and guaranteed not to change. - */ -typedef enum { - /** An invalid value; do not use. */ - _HV_CONFSTR_RESERVED = 0, - - /** Board part number. */ - HV_CONFSTR_BOARD_PART_NUM = 1, - - /** Board serial number. */ - HV_CONFSTR_BOARD_SERIAL_NUM = 2, - - /** Chip serial number. */ - HV_CONFSTR_CHIP_SERIAL_NUM = 3, - - /** Board revision level. */ - HV_CONFSTR_BOARD_REV = 4, - - /** Hypervisor software version. */ - HV_CONFSTR_HV_SW_VER = 5, - - /** The name for this chip model. */ - HV_CONFSTR_CHIP_MODEL = 6, - - /** Human-readable board description. */ - HV_CONFSTR_BOARD_DESC = 7, - - /** Human-readable description of the hypervisor configuration. */ - HV_CONFSTR_HV_CONFIG = 8, - - /** Human-readable version string for the boot image (for instance, - * who built it and when, what configuration file was used). */ - HV_CONFSTR_HV_CONFIG_VER = 9, - - /** Mezzanine part number. */ - HV_CONFSTR_MEZZ_PART_NUM = 10, - - /** Mezzanine serial number. */ - HV_CONFSTR_MEZZ_SERIAL_NUM = 11, - - /** Mezzanine revision level. */ - HV_CONFSTR_MEZZ_REV = 12, - - /** Human-readable mezzanine description. */ - HV_CONFSTR_MEZZ_DESC = 13, - - /** Control path for the onboard network switch. */ - HV_CONFSTR_SWITCH_CONTROL = 14, - - /** Chip revision level. */ - HV_CONFSTR_CHIP_REV = 15, - - /** CPU module part number. */ - HV_CONFSTR_CPUMOD_PART_NUM = 16, - - /** CPU module serial number. */ - HV_CONFSTR_CPUMOD_SERIAL_NUM = 17, - - /** CPU module revision level. */ - HV_CONFSTR_CPUMOD_REV = 18, - - /** Human-readable CPU module description. */ - HV_CONFSTR_CPUMOD_DESC = 19, - - /** Per-tile hypervisor statistics. When this identifier is specified, - * the hv_confstr call takes two extra arguments. The first is the - * HV_XY_TO_LOTAR of the target tile's coordinates. The second is - * a flag word. The only current flag is the lowest bit, which means - * "zero out the stats instead of retrieving them"; in this case the - * buffer and buffer length are ignored. */ - HV_CONFSTR_HV_STATS = 20 - -} HV_ConfstrQuery; - -/** Query a configuration string from the hypervisor. - * - * @param query Identifier for the specific string to be retrieved - * (HV_CONFSTR_xxx). Some strings may require or permit extra - * arguments to be appended which select specific objects to be - * described; see the string descriptions above. - * @param buf Buffer in which to place the string. - * @param len Length of the buffer. - * @return If query is valid, then the length of the corresponding string, - * including the trailing null; if this is greater than len, the string - * was truncated. If query is invalid, HV_EINVAL. If the specified - * buffer is not writable by the client, HV_EFAULT. - */ -int hv_confstr(HV_ConfstrQuery query, HV_VirtAddr buf, int len, ...); - -/** Tile coordinate */ -typedef struct -{ - /** X coordinate, relative to supervisor's top-left coordinate */ - int x; - - /** Y coordinate, relative to supervisor's top-left coordinate */ - int y; -} HV_Coord; - - -#if CHIP_HAS_IPI() - -/** Get the PTE for sending an IPI to a particular tile. - * - * @param tile Tile which will receive the IPI. - * @param pl Indicates which IPI registers: 0 = IPI_0, 1 = IPI_1. - * @param pte Filled with resulting PTE. - * @result Zero if no error, non-zero for invalid parameters. - */ -int hv_get_ipi_pte(HV_Coord tile, int pl, HV_PTE* pte); - -/** Configure the console interrupt. - * - * When the console client interrupt is enabled, the hypervisor will - * deliver the specified IPI to the client in the following situations: - * - * - The console has at least one character available for input. - * - * - The console can accept new characters for output, and the last call - * to hv_console_write() did not write all of the characters requested - * by the client. - * - * Note that in some system configurations, console interrupt will not - * be available; clients should be prepared for this routine to fail and - * to fall back to periodic console polling in that case. - * - * @param ipi Index of the IPI register which will receive the interrupt. - * @param event IPI event number for console interrupt. If less than 0, - * disable the console IPI interrupt. - * @param coord Tile to be targeted for console interrupt. - * @return 0 on success, otherwise, HV_EINVAL if illegal parameter, - * HV_ENOTSUP if console interrupt are not available. - */ -int hv_console_set_ipi(int ipi, int event, HV_Coord coord); - -#else /* !CHIP_HAS_IPI() */ - -/** A set of interrupts. */ -typedef __hv32 HV_IntrMask; - -/** The low interrupt numbers are reserved for use by the client in - * delivering IPIs. Any interrupt numbers higher than this value are - * reserved for use by HV device drivers. */ -#define HV_MAX_IPI_INTERRUPT 7 - -/** Enable a set of device interrupts. - * - * @param enab_mask Bitmap of interrupts to enable. - */ -void hv_enable_intr(HV_IntrMask enab_mask); - -/** Disable a set of device interrupts. - * - * @param disab_mask Bitmap of interrupts to disable. - */ -void hv_disable_intr(HV_IntrMask disab_mask); - -/** Clear a set of device interrupts. - * - * @param clear_mask Bitmap of interrupts to clear. - */ -void hv_clear_intr(HV_IntrMask clear_mask); - -/** Raise a set of device interrupts. - * - * @param raise_mask Bitmap of interrupts to raise. - */ -void hv_raise_intr(HV_IntrMask raise_mask); - -/** Trigger a one-shot interrupt on some tile - * - * @param tile Which tile to interrupt. - * @param interrupt Interrupt number to trigger; must be between 0 and - * HV_MAX_IPI_INTERRUPT. - * @return HV_OK on success, or a hypervisor error code. - */ -HV_Errno hv_trigger_ipi(HV_Coord tile, int interrupt); - -#endif /* !CHIP_HAS_IPI() */ - -/** Store memory mapping in debug memory so that external debugger can read it. - * A maximum of 16 entries can be stored. - * - * @param va VA of memory that is mapped. - * @param len Length of mapped memory. - * @param pa PA of memory that is mapped. - * @return 0 on success, -1 if the maximum number of mappings is exceeded. - */ -int hv_store_mapping(HV_VirtAddr va, unsigned int len, HV_PhysAddr pa); - -/** Given a client PA and a length, return its real (HV) PA. - * - * @param cpa Client physical address. - * @param len Length of mapped memory. - * @return physical address, or -1 if cpa or len is not valid. - */ -HV_PhysAddr hv_inquire_realpa(HV_PhysAddr cpa, unsigned int len); - -/** RTC return flag for no RTC chip present. - */ -#define HV_RTC_NO_CHIP 0x1 - -/** RTC return flag for low-voltage condition, indicating that battery had - * died and time read is unreliable. - */ -#define HV_RTC_LOW_VOLTAGE 0x2 - -/** Date/Time of day */ -typedef struct { -#if CHIP_WORD_SIZE() > 32 - __hv64 tm_sec; /**< Seconds, 0-59 */ - __hv64 tm_min; /**< Minutes, 0-59 */ - __hv64 tm_hour; /**< Hours, 0-23 */ - __hv64 tm_mday; /**< Day of month, 0-30 */ - __hv64 tm_mon; /**< Month, 0-11 */ - __hv64 tm_year; /**< Years since 1900, 0-199 */ - __hv64 flags; /**< Return flags, 0 if no error */ -#else - __hv32 tm_sec; /**< Seconds, 0-59 */ - __hv32 tm_min; /**< Minutes, 0-59 */ - __hv32 tm_hour; /**< Hours, 0-23 */ - __hv32 tm_mday; /**< Day of month, 0-30 */ - __hv32 tm_mon; /**< Month, 0-11 */ - __hv32 tm_year; /**< Years since 1900, 0-199 */ - __hv32 flags; /**< Return flags, 0 if no error */ -#endif -} HV_RTCTime; - -/** Read the current time-of-day clock. - * @return HV_RTCTime of current time (GMT). - */ -HV_RTCTime hv_get_rtc(void); - - -/** Set the current time-of-day clock. - * @param time time to reset time-of-day to (GMT). - */ -void hv_set_rtc(HV_RTCTime time); - -/** Installs a context, comprising a page table and other attributes. - * - * Once this service completes, page_table will be used to translate - * subsequent virtual address references to physical memory. - * - * Installing a context does not cause an implicit TLB flush. Before - * reusing an ASID value for a different address space, the client is - * expected to flush old references from the TLB with hv_flush_asid(). - * (Alternately, hv_flush_all() may be used to flush many ASIDs at once.) - * After invalidating a page table entry, changing its attributes, or - * changing its target CPA, the client is expected to flush old references - * from the TLB with hv_flush_page() or hv_flush_pages(). Making a - * previously invalid page valid does not require a flush. - * - * Specifying an invalid ASID, or an invalid CPA (client physical address) - * (either as page_table_pointer, or within the referenced table), - * or another page table data item documented as above as illegal may - * lead to client termination; since the validation of the table is - * done as needed, this may happen before the service returns, or at - * some later time, or never, depending upon the client's pattern of - * memory references. Page table entries which supply translations for - * invalid virtual addresses may result in client termination, or may - * be silently ignored. "Invalid" in this context means a value which - * was not provided to the client via the appropriate hv_inquire_* routine. - * - * To support changing the instruction VAs at the same time as - * installing the new page table, this call explicitly supports - * setting the "lr" register to a different address and then jumping - * directly to the hv_install_context() routine. In this case, the - * new page table does not need to contain any mapping for the - * hv_install_context address itself. - * - * At most one HV_CTX_PG_SM_* flag may be specified in "flags"; - * if multiple flags are specified, HV_EINVAL is returned. - * Specifying none of the flags results in using the default page size. - * All cores participating in a given client must request the same - * page size, or the results are undefined. - * - * @param page_table Root of the page table. - * @param access PTE providing info on how to read the page table. This - * value must be consistent between multiple tiles sharing a page table, - * and must also be consistent with any virtual mappings the client - * may be using to access the page table. - * @param asid HV_ASID the page table is to be used for. - * @param flags Context flags, denoting attributes or privileges of the - * current context (HV_CTX_xxx). - * @return Zero on success, or a hypervisor error code on failure. - */ -int hv_install_context(HV_PhysAddr page_table, HV_PTE access, HV_ASID asid, - __hv32 flags); - -#endif /* !__ASSEMBLER__ */ - -#define HV_CTX_DIRECTIO 0x1 /**< Direct I/O requests are accepted from - PL0. */ - -#define HV_CTX_PG_SM_4K 0x10 /**< Use 4K small pages, if available. */ -#define HV_CTX_PG_SM_16K 0x20 /**< Use 16K small pages, if available. */ -#define HV_CTX_PG_SM_64K 0x40 /**< Use 64K small pages, if available. */ -#define HV_CTX_PG_SM_MASK 0xf0 /**< Mask of all possible small pages. */ - -#ifndef __ASSEMBLER__ - - -/** Set the number of pages ganged together by HV_PTE_SUPER at a - * particular level of the page table. - * - * The current TILE-Gx hardware only supports powers of four - * (i.e. log2_count must be a multiple of two), and the requested - * "super" page size must be less than the span of the next level in - * the page table. The largest size that can be requested is 64GB. - * - * The shift value is initially "0" for all page table levels, - * indicating that the HV_PTE_SUPER bit is effectively ignored. - * - * If you change the count from one non-zero value to another, the - * hypervisor will flush the entire TLB and TSB to avoid confusion. - * - * @param level Page table level (0, 1, or 2) - * @param log2_count Base-2 log of the number of pages to gang together, - * i.e. how much to shift left the base page size for the super page size. - * @return Zero on success, or a hypervisor error code on failure. - */ -int hv_set_pte_super_shift(int level, int log2_count); - - -/** Value returned from hv_inquire_context(). */ -typedef struct -{ - /** Physical address of page table */ - HV_PhysAddr page_table; - - /** PTE which defines access method for top of page table */ - HV_PTE access; - - /** ASID associated with this page table */ - HV_ASID asid; - - /** Context flags */ - __hv32 flags; -} HV_Context; - -/** Retrieve information about the currently installed context. - * @return The data passed to the last successful hv_install_context call. - */ -HV_Context hv_inquire_context(void); - - -/** Flushes all translations associated with the named address space - * identifier from the TLB and any other hypervisor data structures. - * Translations installed with the "global" bit are not flushed. - * - * Specifying an invalid ASID may lead to client termination. "Invalid" - * in this context means a value which was not provided to the client - * via <tt>hv_inquire_asid()</tt>. - * - * @param asid HV_ASID whose entries are to be flushed. - * @return Zero on success, or a hypervisor error code on failure. -*/ -int hv_flush_asid(HV_ASID asid); - - -/** Flushes all translations associated with the named virtual address - * and page size from the TLB and other hypervisor data structures. Only - * pages visible to the current ASID are affected; note that this includes - * global pages in addition to pages specific to the current ASID. - * - * The supplied VA need not be aligned; it may be anywhere in the - * subject page. - * - * Specifying an invalid virtual address may lead to client termination, - * or may silently succeed. "Invalid" in this context means a value - * which was not provided to the client via hv_inquire_virtual. - * - * @param address Address of the page to flush. - * @param page_size Size of pages to assume. - * @return Zero on success, or a hypervisor error code on failure. - */ -int hv_flush_page(HV_VirtAddr address, HV_PageSize page_size); - - -/** Flushes all translations associated with the named virtual address range - * and page size from the TLB and other hypervisor data structures. Only - * pages visible to the current ASID are affected; note that this includes - * global pages in addition to pages specific to the current ASID. - * - * The supplied VA need not be aligned; it may be anywhere in the - * subject page. - * - * Specifying an invalid virtual address may lead to client termination, - * or may silently succeed. "Invalid" in this context means a value - * which was not provided to the client via hv_inquire_virtual. - * - * @param start Address to flush. - * @param page_size Size of pages to assume. - * @param size The number of bytes to flush. Any page in the range - * [start, start + size) will be flushed from the TLB. - * @return Zero on success, or a hypervisor error code on failure. - */ -int hv_flush_pages(HV_VirtAddr start, HV_PageSize page_size, - unsigned long size); - - -/** Flushes all non-global translations (if preserve_global is true), - * or absolutely all translations (if preserve_global is false). - * - * @param preserve_global Non-zero if we want to preserve "global" mappings. - * @return Zero on success, or a hypervisor error code on failure. -*/ -int hv_flush_all(int preserve_global); - - -/** Restart machine with optional restart command and optional args. - * @param cmd Const pointer to command to restart with, or NULL - * @param args Const pointer to argument string to restart with, or NULL - */ -void hv_restart(HV_VirtAddr cmd, HV_VirtAddr args); - - -/** Halt machine. */ -void hv_halt(void); - - -/** Power off machine. */ -void hv_power_off(void); - - -/** Re-enter virtual-is-physical memory translation mode and restart - * execution at a given address. - * @param entry Client physical address at which to begin execution. - * @return A hypervisor error code on failure; if the operation is - * successful the call does not return. - */ -int hv_reexec(HV_PhysAddr entry); - - -/** Chip topology */ -typedef struct -{ - /** Relative coordinates of the querying tile */ - HV_Coord coord; - - /** Width of the querying supervisor's tile rectangle. */ - int width; - - /** Height of the querying supervisor's tile rectangle. */ - int height; - -} HV_Topology; - -/** Returns information about the tile coordinate system. - * - * Each supervisor is given a rectangle of tiles it potentially controls. - * These tiles are labeled using a relative coordinate system with (0,0) as - * the upper left tile regardless of their physical location on the chip. - * - * This call returns both the size of that rectangle and the position - * within that rectangle of the querying tile. - * - * Not all tiles within that rectangle may be available to the supervisor; - * to get the precise set of available tiles, you must also call - * hv_inquire_tiles(HV_INQ_TILES_AVAIL, ...). - **/ -HV_Topology hv_inquire_topology(void); - -/** Sets of tiles we can retrieve with hv_inquire_tiles(). - * - * These numbers are part of the binary API and guaranteed not to change. - */ -typedef enum { - /** An invalid value; do not use. */ - _HV_INQ_TILES_RESERVED = 0, - - /** All available tiles within the supervisor's tile rectangle. */ - HV_INQ_TILES_AVAIL = 1, - - /** The set of tiles used for hash-for-home caching. */ - HV_INQ_TILES_HFH_CACHE = 2, - - /** The set of tiles that can be legally used as a LOTAR for a PTE. */ - HV_INQ_TILES_LOTAR = 3, - - /** The set of "shared" driver tiles that the hypervisor may - * periodically interrupt. */ - HV_INQ_TILES_SHARED = 4 -} HV_InqTileSet; - -/** Returns specific information about various sets of tiles within the - * supervisor's tile rectangle. - * - * @param set Which set of tiles to retrieve. - * @param cpumask Pointer to a returned bitmask (in row-major order, - * supervisor-relative) of tiles. The low bit of the first word - * corresponds to the tile at the upper left-hand corner of the - * supervisor's rectangle. In order for the supervisor to know the - * buffer length to supply, it should first call hv_inquire_topology. - * @param length Number of bytes available for the returned bitmask. - **/ -HV_Errno hv_inquire_tiles(HV_InqTileSet set, HV_VirtAddr cpumask, int length); - - -/** An identifier for a memory controller. Multiple memory controllers - * may be connected to one chip, and this uniquely identifies each one. - */ -typedef int HV_MemoryController; - -/** A range of physical memory. */ -typedef struct -{ - HV_PhysAddr start; /**< Starting address. */ - __hv64 size; /**< Size in bytes. */ - HV_MemoryController controller; /**< Which memory controller owns this. */ -} HV_PhysAddrRange; - -/** Returns information about a range of physical memory. - * - * hv_inquire_physical() returns one of the ranges of client - * physical addresses which are available to this client. - * - * The first range is retrieved by specifying an idx of 0, and - * successive ranges are returned with subsequent idx values. Ranges - * are ordered by increasing start address (i.e., as idx increases, - * so does start), do not overlap, and do not touch (i.e., the - * available memory is described with the fewest possible ranges). - * - * If an out-of-range idx value is specified, the returned size will be zero. - * A client can count the number of ranges by increasing idx until the - * returned size is zero. There will always be at least one valid range. - * - * Some clients might not be prepared to deal with more than one - * physical address range; they still ought to call this routine and - * issue a warning message if they're given more than one range, on the - * theory that whoever configured the hypervisor to provide that memory - * should know that it's being wasted. - */ -HV_PhysAddrRange hv_inquire_physical(int idx); - -/** Possible DIMM types. */ -typedef enum -{ - NO_DIMM = 0, /**< No DIMM */ - DDR2 = 1, /**< DDR2 */ - DDR3 = 2 /**< DDR3 */ -} HV_DIMM_Type; - -#ifdef __tilegx__ - -/** Log2 of minimum DIMM bytes supported by the memory controller. */ -#define HV_MSH_MIN_DIMM_SIZE_SHIFT 29 - -/** Max number of DIMMs contained by one memory controller. */ -#define HV_MSH_MAX_DIMMS 8 - -#else - -/** Log2 of minimum DIMM bytes supported by the memory controller. */ -#define HV_MSH_MIN_DIMM_SIZE_SHIFT 26 - -/** Max number of DIMMs contained by one memory controller. */ -#define HV_MSH_MAX_DIMMS 2 - -#endif - -/** Number of bits to right-shift to get the DIMM type. */ -#define HV_DIMM_TYPE_SHIFT 0 - -/** Bits to mask to get the DIMM type. */ -#define HV_DIMM_TYPE_MASK 0xf - -/** Number of bits to right-shift to get the DIMM size. */ -#define HV_DIMM_SIZE_SHIFT 4 - -/** Bits to mask to get the DIMM size. */ -#define HV_DIMM_SIZE_MASK 0xf - -/** Memory controller information. */ -typedef struct -{ - HV_Coord coord; /**< Relative tile coordinates of the port used by a - specified tile to communicate with this controller. */ - __hv64 speed; /**< Speed of this controller in bytes per second. */ -} HV_MemoryControllerInfo; - -/** Returns information about a particular memory controller. - * - * hv_inquire_memory_controller(coord,idx) returns information about a - * particular controller. Two pieces of information are returned: - * - The relative coordinates of the port on the controller that the specified - * tile would use to contact it. The relative coordinates may lie - * outside the supervisor's rectangle, i.e. the controller may not - * be attached to a node managed by the querying node's supervisor. - * In particular note that x or y may be negative. - * - The speed of the memory controller. (This is a not-to-exceed value - * based on the raw hardware data rate, and may not be achievable in - * practice; it is provided to give clients information on the relative - * performance of the available controllers.) - * - * Clients should avoid calling this interface with invalid values. - * A client who does may be terminated. - * @param coord Tile for which to calculate the relative port position. - * @param controller Index of the controller; identical to value returned - * from other routines like hv_inquire_physical. - * @return Information about the controller. - */ -HV_MemoryControllerInfo hv_inquire_memory_controller(HV_Coord coord, - int controller); - - -/** A range of virtual memory. */ -typedef struct -{ - HV_VirtAddr start; /**< Starting address. */ - __hv64 size; /**< Size in bytes. */ -} HV_VirtAddrRange; - -/** Returns information about a range of virtual memory. - * - * hv_inquire_virtual() returns one of the ranges of client - * virtual addresses which are available to this client. - * - * The first range is retrieved by specifying an idx of 0, and - * successive ranges are returned with subsequent idx values. Ranges - * are ordered by increasing start address (i.e., as idx increases, - * so does start), do not overlap, and do not touch (i.e., the - * available memory is described with the fewest possible ranges). - * - * If an out-of-range idx value is specified, the returned size will be zero. - * A client can count the number of ranges by increasing idx until the - * returned size is zero. There will always be at least one valid range. - * - * Some clients may well have various virtual addresses hardwired - * into themselves; for instance, their instruction stream may - * have been compiled expecting to live at a particular address. - * Such clients should use this interface to verify they've been - * given the virtual address space they expect, and issue a (potentially - * fatal) warning message otherwise. - * - * Note that the returned size is a __hv64, not a __hv32, so it is - * possible to express a single range spanning the entire 32-bit - * address space. - */ -HV_VirtAddrRange hv_inquire_virtual(int idx); - - -/** A range of ASID values. */ -typedef struct -{ - HV_ASID start; /**< First ASID in the range. */ - unsigned int size; /**< Number of ASIDs. Zero for an invalid range. */ -} HV_ASIDRange; - -/** Returns information about a range of ASIDs. - * - * hv_inquire_asid() returns one of the ranges of address - * space identifiers which are available to this client. - * - * The first range is retrieved by specifying an idx of 0, and - * successive ranges are returned with subsequent idx values. Ranges - * are ordered by increasing start value (i.e., as idx increases, - * so does start), do not overlap, and do not touch (i.e., the - * available ASIDs are described with the fewest possible ranges). - * - * If an out-of-range idx value is specified, the returned size will be zero. - * A client can count the number of ranges by increasing idx until the - * returned size is zero. There will always be at least one valid range. - */ -HV_ASIDRange hv_inquire_asid(int idx); - - -/** Waits for at least the specified number of nanoseconds then returns. - * - * NOTE: this deprecated function currently assumes a 750 MHz clock, - * and is thus not generally suitable for use. New code should call - * hv_sysconf(HV_SYSCONF_CPU_SPEED), compute a cycle count to wait for, - * and delay by looping while checking the cycle counter SPR. - * - * @param nanosecs The number of nanoseconds to sleep. - */ -void hv_nanosleep(int nanosecs); - - -/** Reads a character from the console without blocking. - * - * @return A value from 0-255 indicates the value successfully read. - * A negative value means no value was ready. - */ -int hv_console_read_if_ready(void); - - -/** Writes a character to the console, blocking if the console is busy. - * - * This call cannot fail. If the console is broken for some reason, - * output will simply vanish. - * @param byte Character to write. - */ -void hv_console_putc(int byte); - - -/** Writes a string to the console, blocking if the console is busy. - * @param bytes Pointer to characters to write. - * @param len Number of characters to write. - * @return Number of characters written, or HV_EFAULT if the buffer is invalid. - */ -int hv_console_write(HV_VirtAddr bytes, int len); - - -/** Dispatch the next interrupt from the client downcall mechanism. - * - * The hypervisor uses downcalls to notify the client of asynchronous - * events. Some of these events are hypervisor-created (like incoming - * messages). Some are regular interrupts which initially occur in - * the hypervisor, and are normally handled directly by the client; - * when these occur in a client's interrupt critical section, they must - * be delivered through the downcall mechanism. - * - * A downcall is initially delivered to the client as an INTCTRL_CL - * interrupt, where CL is the client's PL. Upon entry to the INTCTRL_CL - * vector, the client must immediately invoke the hv_downcall_dispatch - * service. This service will not return; instead it will cause one of - * the client's actual downcall-handling interrupt vectors to be entered. - * The EX_CONTEXT registers in the client will be set so that when the - * client irets, it will return to the code which was interrupted by the - * INTCTRL_CL interrupt. - * - * Under some circumstances, the firing of INTCTRL_CL can race with - * the lowering of a device interrupt. In such a case, the - * hv_downcall_dispatch service may issue an iret instruction instead - * of entering one of the client's actual downcall-handling interrupt - * vectors. This will return execution to the location that was - * interrupted by INTCTRL_CL. - * - * Any saving of registers should be done by the actual handling - * vectors; no registers should be changed by the INTCTRL_CL handler. - * In particular, the client should not use a jal instruction to invoke - * the hv_downcall_dispatch service, as that would overwrite the client's - * lr register. Note that the hv_downcall_dispatch service may overwrite - * one or more of the client's system save registers. - * - * The client must not modify the INTCTRL_CL_STATUS SPR. The hypervisor - * will set this register to cause a downcall to happen, and will clear - * it when no further downcalls are pending. - * - * When a downcall vector is entered, the INTCTRL_CL interrupt will be - * masked. When the client is done processing a downcall, and is ready - * to accept another, it must unmask this interrupt; if more downcalls - * are pending, this will cause the INTCTRL_CL vector to be reentered. - * Currently the following interrupt vectors can be entered through a - * downcall: - * - * INT_MESSAGE_RCV_DWNCL (hypervisor message available) - * INT_DEV_INTR_DWNCL (device interrupt) - * INT_DMATLB_MISS_DWNCL (DMA TLB miss) - * INT_SNITLB_MISS_DWNCL (SNI TLB miss) - * INT_DMATLB_ACCESS_DWNCL (DMA TLB access violation) - */ -void hv_downcall_dispatch(void); - -#endif /* !__ASSEMBLER__ */ - -/** We use actual interrupt vectors which never occur (they're only there - * to allow setting MPLs for related SPRs) for our downcall vectors. - */ -/** Message receive downcall interrupt vector */ -#define INT_MESSAGE_RCV_DWNCL INT_BOOT_ACCESS -/** DMA TLB miss downcall interrupt vector */ -#define INT_DMATLB_MISS_DWNCL INT_DMA_ASID -/** Static nework processor instruction TLB miss interrupt vector */ -#define INT_SNITLB_MISS_DWNCL INT_SNI_ASID -/** DMA TLB access violation downcall interrupt vector */ -#define INT_DMATLB_ACCESS_DWNCL INT_DMA_CPL -/** Device interrupt downcall interrupt vector */ -#define INT_DEV_INTR_DWNCL INT_WORLD_ACCESS -/** NMI downcall interrupt vector */ -#define INT_NMI_DWNCL 64 - -#define HV_NMI_FLAG_FORCE 0x1 /**< Force an NMI downcall regardless of - the ICS bit of the client. */ - -#ifndef __ASSEMBLER__ - -/** Requests the inode for a specific full pathname. - * - * Performs a lookup in the hypervisor filesystem for a given filename. - * Multiple calls with the same filename will always return the same inode. - * If there is no such filename, HV_ENOENT is returned. - * A bad filename pointer may result in HV_EFAULT instead. - * - * @param filename Constant pointer to name of requested file - * @return Inode of requested file - */ -int hv_fs_findfile(HV_VirtAddr filename); - - -/** Data returned from an fstat request. - * Note that this structure should be no more than 40 bytes in size so - * that it can always be returned completely in registers. - */ -typedef struct -{ - int size; /**< Size of file (or HV_Errno on error) */ - unsigned int flags; /**< Flags (see HV_FS_FSTAT_FLAGS) */ -} HV_FS_StatInfo; - -/** Bitmask flags for fstat request */ -typedef enum -{ - HV_FS_ISDIR = 0x0001 /**< Is the entry a directory? */ -} HV_FS_FSTAT_FLAGS; - -/** Get stat information on a given file inode. - * - * Return information on the file with the given inode. - * - * IF the HV_FS_ISDIR bit is set, the "file" is a directory. Reading - * it will return NUL-separated filenames (no directory part) relative - * to the path to the inode of the directory "file". These can be - * appended to the path to the directory "file" after a forward slash - * to create additional filenames. Note that it is not required - * that all valid paths be decomposable into valid parent directories; - * a filesystem may validly have just a few files, none of which have - * HV_FS_ISDIR set. However, if clients may wish to enumerate the - * files in the filesystem, it is recommended to include all the - * appropriate parent directory "files" to give a consistent view. - * - * An invalid file inode will cause an HV_EBADF error to be returned. - * - * @param inode The inode number of the query - * @return An HV_FS_StatInfo structure - */ -HV_FS_StatInfo hv_fs_fstat(int inode); - - -/** Read data from a specific hypervisor file. - * On error, may return HV_EBADF for a bad inode or HV_EFAULT for a bad buf. - * Reads near the end of the file will return fewer bytes than requested. - * Reads at or beyond the end of a file will return zero. - * - * @param inode the hypervisor file to read - * @param buf the buffer to read data into - * @param length the number of bytes of data to read - * @param offset the offset into the file to read the data from - * @return number of bytes successfully read, or an HV_Errno code - */ -int hv_fs_pread(int inode, HV_VirtAddr buf, int length, int offset); - - -/** Read a 64-bit word from the specified physical address. - * The address must be 8-byte aligned. - * Specifying an invalid physical address will lead to client termination. - * @param addr The physical address to read - * @param access The PTE describing how to read the memory - * @return The 64-bit value read from the given address - */ -unsigned long long hv_physaddr_read64(HV_PhysAddr addr, HV_PTE access); - - -/** Write a 64-bit word to the specified physical address. - * The address must be 8-byte aligned. - * Specifying an invalid physical address will lead to client termination. - * @param addr The physical address to write - * @param access The PTE that says how to write the memory - * @param val The 64-bit value to write to the given address - */ -void hv_physaddr_write64(HV_PhysAddr addr, HV_PTE access, - unsigned long long val); - - -/** Get the value of the command-line for the supervisor, if any. - * This will not include the filename of the booted supervisor, but may - * include configured-in boot arguments or the hv_restart() arguments. - * If the buffer is not long enough the hypervisor will NUL the first - * character of the buffer but not write any other data. - * @param buf The virtual address to write the command-line string to. - * @param length The length of buf, in characters. - * @return The actual length of the command line, including the trailing NUL - * (may be larger than "length"). - */ -int hv_get_command_line(HV_VirtAddr buf, int length); - - -/** Set a new value for the command-line for the supervisor, which will - * be returned from subsequent invocations of hv_get_command_line() on - * this tile. - * @param buf The virtual address to read the command-line string from. - * @param length The length of buf, in characters; must be no more than - * HV_COMMAND_LINE_LEN. - * @return Zero if successful, or a hypervisor error code. - */ -HV_Errno hv_set_command_line(HV_VirtAddr buf, int length); - -/** Maximum size of a command line passed to hv_set_command_line(); note - * that a line returned from hv_get_command_line() could be larger than - * this.*/ -#define HV_COMMAND_LINE_LEN 256 - -/** Tell the hypervisor how to cache non-priority pages - * (its own as well as pages explicitly represented in page tables). - * Normally these will be represented as red/black pages, but - * when the supervisor starts to allocate "priority" pages in the PTE - * the hypervisor will need to start marking those pages as (e.g.) "red" - * and non-priority pages as either "black" (if they cache-alias - * with the existing priority pages) or "red/black" (if they don't). - * The bitmask provides information on which parts of the cache - * have been used for pinned pages so far on this tile; if (1 << N) - * appears in the bitmask, that indicates that a 4KB region of the - * cache starting at (N * 4KB) is in use by a "priority" page. - * The portion of cache used by a particular page can be computed - * by taking the page's PA, modulo CHIP_L2_CACHE_SIZE(), and setting - * all the "4KB" bits corresponding to the actual page size. - * @param bitmask A bitmap of priority page set values - */ -void hv_set_caching(unsigned long bitmask); - - -/** Zero out a specified number of pages. - * The va and size must both be multiples of 4096. - * Caches are bypassed and memory is directly set to zero. - * This API is implemented only in the magic hypervisor and is intended - * to provide a performance boost to the minimal supervisor by - * giving it a fast way to zero memory pages when allocating them. - * @param va Virtual address where the page has been mapped - * @param size Number of bytes (must be a page size multiple) - */ -void hv_bzero_page(HV_VirtAddr va, unsigned int size); - - -/** State object for the hypervisor messaging subsystem. */ -typedef struct -{ -#if CHIP_VA_WIDTH() > 32 - __hv64 opaque[2]; /**< No user-serviceable parts inside */ -#else - __hv32 opaque[2]; /**< No user-serviceable parts inside */ -#endif -} -HV_MsgState; - -/** Register to receive incoming messages. - * - * This routine configures the current tile so that it can receive - * incoming messages. It must be called before the client can receive - * messages with the hv_receive_message routine, and must be called on - * each tile which will receive messages. - * - * msgstate is the virtual address of a state object of type HV_MsgState. - * Once the state is registered, the client must not read or write the - * state object; doing so will cause undefined results. - * - * If this routine is called with msgstate set to 0, the client's message - * state will be freed and it will no longer be able to receive messages. - * Note that this may cause the loss of any as-yet-undelivered messages - * for the client. - * - * If another client attempts to send a message to a client which has - * not yet called hv_register_message_state, or which has freed its - * message state, the message will not be delivered, as if the client - * had insufficient buffering. - * - * This routine returns HV_OK if the registration was successful, and - * HV_EINVAL if the supplied state object is unsuitable. Note that some - * errors may not be detected during this routine, but might be detected - * during a subsequent message delivery. - * @param msgstate State object. - **/ -HV_Errno hv_register_message_state(HV_MsgState* msgstate); - -/** Possible message recipient states. */ -typedef enum -{ - HV_TO_BE_SENT, /**< Not sent (not attempted, or recipient not ready) */ - HV_SENT, /**< Successfully sent */ - HV_BAD_RECIP /**< Bad recipient coordinates (permanent error) */ -} HV_Recip_State; - -/** Message recipient. */ -typedef struct -{ - /** X coordinate, relative to supervisor's top-left coordinate */ - unsigned int x:11; - - /** Y coordinate, relative to supervisor's top-left coordinate */ - unsigned int y:11; - - /** Status of this recipient */ - HV_Recip_State state:10; -} HV_Recipient; - -/** Send a message to a set of recipients. - * - * This routine sends a message to a set of recipients. - * - * recips is an array of HV_Recipient structures. Each specifies a tile, - * and a message state; initially, it is expected that the state will - * be set to HV_TO_BE_SENT. nrecip specifies the number of recipients - * in the recips array. - * - * For each recipient whose state is HV_TO_BE_SENT, the hypervisor attempts - * to send that tile the specified message. In order to successfully - * receive the message, the receiver must be a valid tile to which the - * sender has access, must not be the sending tile itself, and must have - * sufficient free buffer space. (The hypervisor guarantees that each - * tile which has called hv_register_message_state() will be able to - * buffer one message from every other tile which can legally send to it; - * more space may be provided but is not guaranteed.) If an invalid tile - * is specified, the recipient's state is set to HV_BAD_RECIP; this is a - * permanent delivery error. If the message is successfully delivered - * to the recipient's buffer, the recipient's state is set to HV_SENT. - * Otherwise, the recipient's state is unchanged. Message delivery is - * synchronous; all attempts to send messages are completed before this - * routine returns. - * - * If no permanent delivery errors were encountered, the routine returns - * the number of messages successfully sent: that is, the number of - * recipients whose states changed from HV_TO_BE_SENT to HV_SENT during - * this operation. If any permanent delivery errors were encountered, - * the routine returns HV_ERECIP. In the event of permanent delivery - * errors, it may be the case that delivery was not attempted to all - * recipients; if any messages were successfully delivered, however, - * recipients' state values will be updated appropriately. - * - * It is explicitly legal to specify a recipient structure whose state - * is not HV_TO_BE_SENT; such a recipient is ignored. One suggested way - * of using hv_send_message to send a message to multiple tiles is to set - * up a list of recipients, and then call the routine repeatedly with the - * same list, each time accumulating the number of messages successfully - * sent, until all messages are sent, a permanent error is encountered, - * or the desired number of attempts have been made. When used in this - * way, the routine will deliver each message no more than once to each - * recipient. - * - * Note that a message being successfully delivered to the recipient's - * buffer space does not guarantee that it is received by the recipient, - * either immediately or at any time in the future; the recipient might - * never call hv_receive_message, or could register a different state - * buffer, losing the message. - * - * Specifying the same recipient more than once in the recipient list - * is an error, which will not result in an error return but which may - * or may not result in more than one message being delivered to the - * recipient tile. - * - * buf and buflen specify the message to be sent. buf is a virtual address - * which must be currently mapped in the client's page table; if not, the - * routine returns HV_EFAULT. buflen must be greater than zero and less - * than or equal to HV_MAX_MESSAGE_SIZE, and nrecip must be less than the - * number of tiles to which the sender has access; if not, the routine - * returns HV_EINVAL. - * @param recips List of recipients. - * @param nrecip Number of recipients. - * @param buf Address of message data. - * @param buflen Length of message data. - **/ -int hv_send_message(HV_Recipient *recips, int nrecip, - HV_VirtAddr buf, int buflen); - -/** Maximum hypervisor message size, in bytes */ -#define HV_MAX_MESSAGE_SIZE 28 - - -/** Return value from hv_receive_message() */ -typedef struct -{ - int msglen; /**< Message length in bytes, or an error code */ - __hv32 source; /**< Code identifying message sender (HV_MSG_xxx) */ -} HV_RcvMsgInfo; - -#define HV_MSG_TILE 0x0 /**< Message source is another tile */ -#define HV_MSG_INTR 0x1 /**< Message source is a driver interrupt */ - -/** Receive a message. - * - * This routine retrieves a message from the client's incoming message - * buffer. - * - * Multiple messages sent from a particular sending tile to a particular - * receiving tile are received in the order that they were sent; however, - * no ordering is guaranteed between messages sent by different tiles. - * - * Whenever the a client's message buffer is empty, the first message - * subsequently received will cause the client's MESSAGE_RCV_DWNCL - * interrupt vector to be invoked through the interrupt downcall mechanism - * (see the description of the hv_downcall_dispatch() routine for details - * on downcalls). - * - * Another message-available downcall will not occur until a call to - * this routine is made when the message buffer is empty, and a message - * subsequently arrives. Note that such a downcall could occur while - * this routine is executing. If the calling code does not wish this - * to happen, it is recommended that this routine be called with the - * INTCTRL_1 interrupt masked, or inside an interrupt critical section. - * - * msgstate is the value previously passed to hv_register_message_state(). - * buf is the virtual address of the buffer into which the message will - * be written; buflen is the length of the buffer. - * - * This routine returns an HV_RcvMsgInfo structure. The msglen member - * of that structure is the length of the message received, zero if no - * message is available, or HV_E2BIG if the message is too large for the - * specified buffer. If the message is too large, it is not consumed, - * and may be retrieved by a subsequent call to this routine specifying - * a sufficiently large buffer. A buffer which is HV_MAX_MESSAGE_SIZE - * bytes long is guaranteed to be able to receive any possible message. - * - * The source member of the HV_RcvMsgInfo structure describes the sender - * of the message. For messages sent by another client tile via an - * hv_send_message() call, this value is HV_MSG_TILE; for messages sent - * as a result of a device interrupt, this value is HV_MSG_INTR. - */ - -HV_RcvMsgInfo hv_receive_message(HV_MsgState msgstate, HV_VirtAddr buf, - int buflen); - - -/** Start remaining tiles owned by this supervisor. Initially, only one tile - * executes the client program; after it calls this service, the other tiles - * are started. This allows the initial tile to do one-time configuration - * of shared data structures without having to lock them against simultaneous - * access. - */ -void hv_start_all_tiles(void); - - -/** Open a hypervisor device. - * - * This service initializes an I/O device and its hypervisor driver software, - * and makes it available for use. The open operation is per-device per-chip; - * once it has been performed, the device handle returned may be used in other - * device services calls made by any tile. - * - * @param name Name of the device. A base device name is just a text string - * (say, "pcie"). If there is more than one instance of a device, the - * base name is followed by a slash and a device number (say, "pcie/0"). - * Some devices may support further structure beneath those components; - * most notably, devices which require control operations do so by - * supporting reads and/or writes to a control device whose name - * includes a trailing "/ctl" (say, "pcie/0/ctl"). - * @param flags Flags (HV_DEV_xxx). - * @return A positive integer device handle, or a negative error code. - */ -int hv_dev_open(HV_VirtAddr name, __hv32 flags); - - -/** Close a hypervisor device. - * - * This service uninitializes an I/O device and its hypervisor driver - * software, and makes it unavailable for use. The close operation is - * per-device per-chip; once it has been performed, the device is no longer - * available. Normally there is no need to ever call the close service. - * - * @param devhdl Device handle of the device to be closed. - * @return Zero if the close is successful, otherwise, a negative error code. - */ -int hv_dev_close(int devhdl); - - -/** Read data from a hypervisor device synchronously. - * - * This service transfers data from a hypervisor device to a memory buffer. - * When the service returns, the data has been written from the memory buffer, - * and the buffer will not be further modified by the driver. - * - * No ordering is guaranteed between requests issued from different tiles. - * - * Devices may choose to support both the synchronous and asynchronous read - * operations, only one of them, or neither of them. - * - * @param devhdl Device handle of the device to be read from. - * @param flags Flags (HV_DEV_xxx). - * @param va Virtual address of the target data buffer. This buffer must - * be mapped in the currently installed page table; if not, HV_EFAULT - * may be returned. - * @param len Number of bytes to be transferred. - * @param offset Driver-dependent offset. For a random-access device, this is - * often a byte offset from the beginning of the device; in other cases, - * like on a control device, it may have a different meaning. - * @return A non-negative value if the read was at least partially successful; - * otherwise, a negative error code. The precise interpretation of - * the return value is driver-dependent, but many drivers will return - * the number of bytes successfully transferred. - */ -int hv_dev_pread(int devhdl, __hv32 flags, HV_VirtAddr va, __hv32 len, - __hv64 offset); - -#define HV_DEV_NB_EMPTY 0x1 /**< Don't block when no bytes of data can - be transferred. */ -#define HV_DEV_NB_PARTIAL 0x2 /**< Don't block when some bytes, but not all - of the requested bytes, can be - transferred. */ -#define HV_DEV_NOCACHE 0x4 /**< The caller warrants that none of the - cache lines which might contain data - from the requested buffer are valid. - Useful with asynchronous operations - only. */ - -#define HV_DEV_ALLFLAGS (HV_DEV_NB_EMPTY | HV_DEV_NB_PARTIAL | \ - HV_DEV_NOCACHE) /**< All HV_DEV_xxx flags */ - -/** Write data to a hypervisor device synchronously. - * - * This service transfers data from a memory buffer to a hypervisor device. - * When the service returns, the data has been read from the memory buffer, - * and the buffer may be overwritten by the client; the data may not - * necessarily have been conveyed to the actual hardware I/O interface. - * - * No ordering is guaranteed between requests issued from different tiles. - * - * Devices may choose to support both the synchronous and asynchronous write - * operations, only one of them, or neither of them. - * - * @param devhdl Device handle of the device to be written to. - * @param flags Flags (HV_DEV_xxx). - * @param va Virtual address of the source data buffer. This buffer must - * be mapped in the currently installed page table; if not, HV_EFAULT - * may be returned. - * @param len Number of bytes to be transferred. - * @param offset Driver-dependent offset. For a random-access device, this is - * often a byte offset from the beginning of the device; in other cases, - * like on a control device, it may have a different meaning. - * @return A non-negative value if the write was at least partially successful; - * otherwise, a negative error code. The precise interpretation of - * the return value is driver-dependent, but many drivers will return - * the number of bytes successfully transferred. - */ -int hv_dev_pwrite(int devhdl, __hv32 flags, HV_VirtAddr va, __hv32 len, - __hv64 offset); - - -/** Interrupt arguments, used in the asynchronous I/O interfaces. */ -#if CHIP_VA_WIDTH() > 32 -typedef __hv64 HV_IntArg; -#else -typedef __hv32 HV_IntArg; -#endif - -/** Interrupt messages are delivered via the mechanism as normal messages, - * but have a message source of HV_DEV_INTR. The message is formatted - * as an HV_IntrMsg structure. - */ - -typedef struct -{ - HV_IntArg intarg; /**< Interrupt argument, passed to the poll/preada/pwritea - services */ - HV_IntArg intdata; /**< Interrupt-specific interrupt data */ -} HV_IntrMsg; - -/** Request an interrupt message when a device condition is satisfied. - * - * This service requests that an interrupt message be delivered to the - * requesting tile when a device becomes readable or writable, or when any - * data queued to the device via previous write operations from this tile - * has been actually sent out on the hardware I/O interface. Devices may - * choose to support any, all, or none of the available conditions. - * - * If multiple conditions are specified, only one message will be - * delivered. If the event mask delivered to that interrupt handler - * indicates that some of the conditions have not yet occurred, the - * client must issue another poll() call if it wishes to wait for those - * conditions. - * - * Only one poll may be outstanding per device handle per tile. If more than - * one tile is polling on the same device and condition, they will all be - * notified when it happens. Because of this, clients may not assume that - * the condition signaled is necessarily still true when they request a - * subsequent service; for instance, the readable data which caused the - * poll call to interrupt may have been read by another tile in the interim. - * - * The notification interrupt message could come directly, or via the - * downcall (intctrl1) method, depending on what the tile is doing - * when the condition is satisfied. Note that it is possible for the - * requested interrupt to be delivered after this service is called but - * before it returns. - * - * @param devhdl Device handle of the device to be polled. - * @param events Flags denoting the events which will cause the interrupt to - * be delivered (HV_DEVPOLL_xxx). - * @param intarg Value which will be delivered as the intarg member of the - * eventual interrupt message; the intdata member will be set to a - * mask of HV_DEVPOLL_xxx values indicating which conditions have been - * satisifed. - * @return Zero if the interrupt was successfully scheduled; otherwise, a - * negative error code. - */ -int hv_dev_poll(int devhdl, __hv32 events, HV_IntArg intarg); - -#define HV_DEVPOLL_READ 0x1 /**< Test device for readability */ -#define HV_DEVPOLL_WRITE 0x2 /**< Test device for writability */ -#define HV_DEVPOLL_FLUSH 0x4 /**< Test device for output drained */ - - -/** Cancel a request for an interrupt when a device event occurs. - * - * This service requests that no interrupt be delivered when the events - * noted in the last-issued poll() call happen. Once this service returns, - * the interrupt has been canceled; however, it is possible for the interrupt - * to be delivered after this service is called but before it returns. - * - * @param devhdl Device handle of the device on which to cancel polling. - * @return Zero if the poll was successfully canceled; otherwise, a negative - * error code. - */ -int hv_dev_poll_cancel(int devhdl); - - -/** NMI information */ -typedef struct -{ - /** Result: negative error, or HV_NMI_RESULT_xxx. */ - int result; - - /** PC from interrupted remote core (if result != HV_NMI_RESULT_FAIL_HV). */ - HV_VirtAddr pc; - -} HV_NMI_Info; - -/** NMI issued successfully. */ -#define HV_NMI_RESULT_OK 0 - -/** NMI not issued: remote tile running at client PL with ICS set. */ -#define HV_NMI_RESULT_FAIL_ICS 1 - -/** NMI not issued: remote tile waiting in hypervisor. */ -#define HV_NMI_RESULT_FAIL_HV 2 - -/** Force an NMI downcall regardless of the ICS bit of the client. */ -#define HV_NMI_FLAG_FORCE 0x1 - -/** Send an NMI interrupt request to a particular tile. - * - * This will cause the NMI to be issued on the remote tile regardless - * of the state of the client interrupt mask. However, if the remote - * tile is in the hypervisor, it will not execute the NMI, and - * HV_NMI_RESULT_FAIL_HV will be returned. Similarly, if the remote - * tile is in a client interrupt critical section at the time of the - * NMI, it will not execute the NMI, and HV_NMI_RESULT_FAIL_ICS will - * be returned. In this second case, however, if HV_NMI_FLAG_FORCE - * is set in flags, then the remote tile will enter its NMI interrupt - * vector regardless. Forcing the NMI vector during an interrupt - * critical section will mean that the client can not safely continue - * execution after handling the interrupt. - * - * @param tile Tile to which the NMI request is sent. - * @param info NMI information which is defined by and interpreted by the - * supervisor, is passed to the specified tile, and is - * stored in the SPR register SYSTEM_SAVE_{CLIENT_PL}_2 on the - * specified tile when entering the NMI handler routine. - * Typically, this parameter stores the NMI type, or an aligned - * VA plus some special bits, etc. - * @param flags Flags (HV_NMI_FLAG_xxx). - * @return Information about the requested NMI. - */ -HV_NMI_Info hv_send_nmi(HV_Coord tile, unsigned long info, __hv64 flags); - - -/** Scatter-gather list for preada/pwritea calls. */ -typedef struct -#if CHIP_VA_WIDTH() <= 32 -__attribute__ ((packed, aligned(4))) -#endif -{ - HV_PhysAddr pa; /**< Client physical address of the buffer segment. */ - HV_PTE pte; /**< Page table entry describing the caching and location - override characteristics of the buffer segment. Some - drivers ignore this element and will require that - the NOCACHE flag be set on their requests. */ - __hv32 len; /**< Length of the buffer segment. */ -} HV_SGL; - -#define HV_SGL_MAXLEN 16 /**< Maximum number of entries in a scatter-gather - list */ - -/** Read data from a hypervisor device asynchronously. - * - * This service transfers data from a hypervisor device to a memory buffer. - * When the service returns, the read has been scheduled. When the read - * completes, an interrupt message will be delivered, and the buffer will - * not be further modified by the driver. - * - * The number of possible outstanding asynchronous requests is defined by - * each driver, but it is recommended that it be at least two requests - * per tile per device. - * - * No ordering is guaranteed between synchronous and asynchronous requests, - * even those issued on the same tile. - * - * The completion interrupt message could come directly, or via the downcall - * (intctrl1) method, depending on what the tile is doing when the read - * completes. Interrupts do not coalesce; one is delivered for each - * asynchronous I/O request. Note that it is possible for the requested - * interrupt to be delivered after this service is called but before it - * returns. - * - * Devices may choose to support both the synchronous and asynchronous read - * operations, only one of them, or neither of them. - * - * @param devhdl Device handle of the device to be read from. - * @param flags Flags (HV_DEV_xxx). - * @param sgl_len Number of elements in the scatter-gather list. - * @param sgl Scatter-gather list describing the memory to which data will be - * written. - * @param offset Driver-dependent offset. For a random-access device, this is - * often a byte offset from the beginning of the device; in other cases, - * like on a control device, it may have a different meaning. - * @param intarg Value which will be delivered as the intarg member of the - * eventual interrupt message; the intdata member will be set to the - * normal return value from the read request. - * @return Zero if the read was successfully scheduled; otherwise, a negative - * error code. Note that some drivers may choose to pre-validate - * their arguments, and may thus detect certain device error - * conditions at this time rather than when the completion notification - * occurs, but this is not required. - */ -int hv_dev_preada(int devhdl, __hv32 flags, __hv32 sgl_len, - HV_SGL sgl[/* sgl_len */], __hv64 offset, HV_IntArg intarg); - - -/** Write data to a hypervisor device asynchronously. - * - * This service transfers data from a memory buffer to a hypervisor - * device. When the service returns, the write has been scheduled. - * When the write completes, an interrupt message will be delivered, - * and the buffer may be overwritten by the client; the data may not - * necessarily have been conveyed to the actual hardware I/O interface. - * - * The number of possible outstanding asynchronous requests is defined by - * each driver, but it is recommended that it be at least two requests - * per tile per device. - * - * No ordering is guaranteed between synchronous and asynchronous requests, - * even those issued on the same tile. - * - * The completion interrupt message could come directly, or via the downcall - * (intctrl1) method, depending on what the tile is doing when the read - * completes. Interrupts do not coalesce; one is delivered for each - * asynchronous I/O request. Note that it is possible for the requested - * interrupt to be delivered after this service is called but before it - * returns. - * - * Devices may choose to support both the synchronous and asynchronous write - * operations, only one of them, or neither of them. - * - * @param devhdl Device handle of the device to be read from. - * @param flags Flags (HV_DEV_xxx). - * @param sgl_len Number of elements in the scatter-gather list. - * @param sgl Scatter-gather list describing the memory from which data will be - * read. - * @param offset Driver-dependent offset. For a random-access device, this is - * often a byte offset from the beginning of the device; in other cases, - * like on a control device, it may have a different meaning. - * @param intarg Value which will be delivered as the intarg member of the - * eventual interrupt message; the intdata member will be set to the - * normal return value from the write request. - * @return Zero if the write was successfully scheduled; otherwise, a negative - * error code. Note that some drivers may choose to pre-validate - * their arguments, and may thus detect certain device error - * conditions at this time rather than when the completion notification - * occurs, but this is not required. - */ -int hv_dev_pwritea(int devhdl, __hv32 flags, __hv32 sgl_len, - HV_SGL sgl[/* sgl_len */], __hv64 offset, HV_IntArg intarg); - - -/** Define a pair of tile and ASID to identify a user process context. */ -typedef struct -{ - /** X coordinate, relative to supervisor's top-left coordinate */ - unsigned int x:11; - - /** Y coordinate, relative to supervisor's top-left coordinate */ - unsigned int y:11; - - /** ASID of the process on this x,y tile */ - HV_ASID asid:10; -} HV_Remote_ASID; - -/** Flush cache and/or TLB state on remote tiles. - * - * @param cache_pa Client physical address to flush from cache (ignored if - * the length encoded in cache_control is zero, or if - * HV_FLUSH_EVICT_L2 is set, or if cache_cpumask is NULL). - * @param cache_control This argument allows you to specify a length of - * physical address space to flush (maximum HV_FLUSH_MAX_CACHE_LEN). - * You can "or" in HV_FLUSH_EVICT_L2 to flush the whole L2 cache. - * You can "or" in HV_FLUSH_EVICT_L1I to flush the whole L1I cache. - * HV_FLUSH_ALL flushes all caches. - * @param cache_cpumask Bitmask (in row-major order, supervisor-relative) of - * tile indices to perform cache flush on. The low bit of the first - * word corresponds to the tile at the upper left-hand corner of the - * supervisor's rectangle. If passed as a NULL pointer, equivalent - * to an empty bitmask. On chips which support hash-for-home caching, - * if passed as -1, equivalent to a mask containing tiles which could - * be doing hash-for-home caching. - * @param tlb_va Virtual address to flush from TLB (ignored if - * tlb_length is zero or tlb_cpumask is NULL). - * @param tlb_length Number of bytes of data to flush from the TLB. - * @param tlb_pgsize Page size to use for TLB flushes. - * tlb_va and tlb_length need not be aligned to this size. - * @param tlb_cpumask Bitmask for tlb flush, like cache_cpumask. - * If passed as a NULL pointer, equivalent to an empty bitmask. - * @param asids Pointer to an HV_Remote_ASID array of tile/ASID pairs to flush. - * @param asidcount Number of HV_Remote_ASID entries in asids[]. - * @return Zero for success, or else HV_EINVAL or HV_EFAULT for errors that - * are detected while parsing the arguments. - */ -int hv_flush_remote(HV_PhysAddr cache_pa, unsigned long cache_control, - unsigned long* cache_cpumask, - HV_VirtAddr tlb_va, unsigned long tlb_length, - unsigned long tlb_pgsize, unsigned long* tlb_cpumask, - HV_Remote_ASID* asids, int asidcount); - -/** Include in cache_control to ensure a flush of the entire L2. */ -#define HV_FLUSH_EVICT_L2 (1UL << 31) - -/** Include in cache_control to ensure a flush of the entire L1I. */ -#define HV_FLUSH_EVICT_L1I (1UL << 30) - -/** Maximum legal size to use for the "length" component of cache_control. */ -#define HV_FLUSH_MAX_CACHE_LEN ((1UL << 30) - 1) - -/** Use for cache_control to ensure a flush of all caches. */ -#define HV_FLUSH_ALL -1UL - -#else /* __ASSEMBLER__ */ - -/** Include in cache_control to ensure a flush of the entire L2. */ -#define HV_FLUSH_EVICT_L2 (1 << 31) - -/** Include in cache_control to ensure a flush of the entire L1I. */ -#define HV_FLUSH_EVICT_L1I (1 << 30) - -/** Maximum legal size to use for the "length" component of cache_control. */ -#define HV_FLUSH_MAX_CACHE_LEN ((1 << 30) - 1) - -/** Use for cache_control to ensure a flush of all caches. */ -#define HV_FLUSH_ALL -1 - -#endif /* __ASSEMBLER__ */ - -#ifndef __ASSEMBLER__ - -/** Return a 64-bit value corresponding to the PTE if needed */ -#define hv_pte_val(pte) ((pte).val) - -/** Cast a 64-bit value to an HV_PTE */ -#define hv_pte(val) ((HV_PTE) { val }) - -#endif /* !__ASSEMBLER__ */ - - -/** Bits in the size of an HV_PTE */ -#define HV_LOG2_PTE_SIZE 3 - -/** Size of an HV_PTE */ -#define HV_PTE_SIZE (1 << HV_LOG2_PTE_SIZE) - - -/* Bits in HV_PTE's low word. */ -#define HV_PTE_INDEX_PRESENT 0 /**< PTE is valid */ -#define HV_PTE_INDEX_MIGRATING 1 /**< Page is migrating */ -#define HV_PTE_INDEX_CLIENT0 2 /**< Page client state 0 */ -#define HV_PTE_INDEX_CLIENT1 3 /**< Page client state 1 */ -#define HV_PTE_INDEX_NC 4 /**< L1$/L2$ incoherent with L3$ */ -#define HV_PTE_INDEX_NO_ALLOC_L1 5 /**< Page is uncached in local L1$ */ -#define HV_PTE_INDEX_NO_ALLOC_L2 6 /**< Page is uncached in local L2$ */ -#define HV_PTE_INDEX_CACHED_PRIORITY 7 /**< Page is priority cached */ -#define HV_PTE_INDEX_PAGE 8 /**< PTE describes a page */ -#define HV_PTE_INDEX_GLOBAL 9 /**< Page is global */ -#define HV_PTE_INDEX_USER 10 /**< Page is user-accessible */ -#define HV_PTE_INDEX_ACCESSED 11 /**< Page has been accessed */ -#define HV_PTE_INDEX_DIRTY 12 /**< Page has been written */ - /* Bits 13-14 are reserved for - future use. */ -#define HV_PTE_INDEX_SUPER 15 /**< Pages ganged together for TLB */ -#define HV_PTE_INDEX_MODE 16 /**< Page mode; see HV_PTE_MODE_xxx */ -#define HV_PTE_MODE_BITS 3 /**< Number of bits in mode */ -#define HV_PTE_INDEX_CLIENT2 19 /**< Page client state 2 */ -#define HV_PTE_INDEX_LOTAR 20 /**< Page's LOTAR; must be high bits - of word */ -#define HV_PTE_LOTAR_BITS 12 /**< Number of bits in a LOTAR */ - -/* Bits in HV_PTE's high word. */ -#define HV_PTE_INDEX_READABLE 32 /**< Page is readable */ -#define HV_PTE_INDEX_WRITABLE 33 /**< Page is writable */ -#define HV_PTE_INDEX_EXECUTABLE 34 /**< Page is executable */ -#define HV_PTE_INDEX_PTFN 35 /**< Page's PTFN; must be high bits - of word */ -#define HV_PTE_PTFN_BITS 29 /**< Number of bits in a PTFN */ - -/* - * Legal values for the PTE's mode field - */ -/** Data is not resident in any caches; loads and stores access memory - * directly. - */ -#define HV_PTE_MODE_UNCACHED 1 - -/** Data is resident in the tile's local L1 and/or L2 caches; if a load - * or store misses there, it goes to memory. - * - * The copy in the local L1$/L2$ is not invalidated when the copy in - * memory is changed. - */ -#define HV_PTE_MODE_CACHE_NO_L3 2 - -/** Data is resident in the tile's local L1 and/or L2 caches. If a load - * or store misses there, it goes to an L3 cache in a designated tile; - * if it misses there, it goes to memory. - * - * If the NC bit is not set, the copy in the local L1$/L2$ is invalidated - * when the copy in the remote L3$ is changed. Otherwise, such - * invalidation will not occur. - * - * Chips for which CHIP_HAS_COHERENT_LOCAL_CACHE() is 0 do not support - * invalidation from an L3$ to another tile's L1$/L2$. If the NC bit is - * clear on such a chip, no copy is kept in the local L1$/L2$ in this mode. - */ -#define HV_PTE_MODE_CACHE_TILE_L3 3 - -/** Data is resident in the tile's local L1 and/or L2 caches. If a load - * or store misses there, it goes to an L3 cache in one of a set of - * designated tiles; if it misses there, it goes to memory. Which tile - * is chosen from the set depends upon a hash function applied to the - * physical address. This mode is not supported on chips for which - * CHIP_HAS_CBOX_HOME_MAP() is 0. - * - * If the NC bit is not set, the copy in the local L1$/L2$ is invalidated - * when the copy in the remote L3$ is changed. Otherwise, such - * invalidation will not occur. - * - * Chips for which CHIP_HAS_COHERENT_LOCAL_CACHE() is 0 do not support - * invalidation from an L3$ to another tile's L1$/L2$. If the NC bit is - * clear on such a chip, no copy is kept in the local L1$/L2$ in this mode. - */ -#define HV_PTE_MODE_CACHE_HASH_L3 4 - -/** Data is not resident in memory; accesses are instead made to an I/O - * device, whose tile coordinates are given by the PTE's LOTAR field. - * This mode is only supported on chips for which CHIP_HAS_MMIO() is 1. - * The EXECUTABLE bit may not be set in an MMIO PTE. - */ -#define HV_PTE_MODE_MMIO 5 - - -/* C wants 1ULL so it is typed as __hv64, but the assembler needs just numbers. - * The assembler can't handle shifts greater than 31, but treats them - * as shifts mod 32, so assembler code must be aware of which word - * the bit belongs in when using these macros. - */ -#ifdef __ASSEMBLER__ -#define __HV_PTE_ONE 1 /**< One, for assembler */ -#else -#define __HV_PTE_ONE 1ULL /**< One, for C */ -#endif - -/** Is this PTE present? - * - * If this bit is set, this PTE represents a valid translation or level-2 - * page table pointer. Otherwise, the page table does not contain a - * translation for the subject virtual pages. - * - * If this bit is not set, the other bits in the PTE are not - * interpreted by the hypervisor, and may contain any value. - */ -#define HV_PTE_PRESENT (__HV_PTE_ONE << HV_PTE_INDEX_PRESENT) - -/** Does this PTE map a page? - * - * If this bit is set in a level-0 page table, the entry should be - * interpreted as a level-2 page table entry mapping a jumbo page. - * - * If this bit is set in a level-1 page table, the entry should be - * interpreted as a level-2 page table entry mapping a large page. - * - * This bit should not be modified by the client while PRESENT is set, as - * doing so may race with the hypervisor's update of ACCESSED and DIRTY bits. - * - * In a level-2 page table, this bit is ignored and must be zero. - */ -#define HV_PTE_PAGE (__HV_PTE_ONE << HV_PTE_INDEX_PAGE) - -/** Does this PTE implicitly reference multiple pages? - * - * If this bit is set in the page table (either in the level-2 page table, - * or in a higher level page table in conjunction with the PAGE bit) - * then the PTE specifies a range of contiguous pages, not a single page. - * The hv_set_pte_super_shift() allows you to specify the count for - * each level of the page table. - * - * Note: this bit is not supported on TILEPro systems. - */ -#define HV_PTE_SUPER (__HV_PTE_ONE << HV_PTE_INDEX_SUPER) - -/** Is this a global (non-ASID) mapping? - * - * If this bit is set, the translations established by this PTE will - * not be flushed from the TLB by the hv_flush_asid() service; they - * will be flushed by the hv_flush_page() or hv_flush_pages() services. - * - * Setting this bit for translations which are identical in all page - * tables (for instance, code and data belonging to a client OS) can - * be very beneficial, as it will reduce the number of TLB misses. - * Note that, while it is not an error which will be detected by the - * hypervisor, it is an extremely bad idea to set this bit for - * translations which are _not_ identical in all page tables. - * - * This bit should not be modified by the client while PRESENT is set, as - * doing so may race with the hypervisor's update of ACCESSED and DIRTY bits. - * - * This bit is ignored in level-1 PTEs unless the Page bit is set. - */ -#define HV_PTE_GLOBAL (__HV_PTE_ONE << HV_PTE_INDEX_GLOBAL) - -/** Is this mapping accessible to users? - * - * If this bit is set, code running at any PL will be permitted to - * access the virtual addresses mapped by this PTE. Otherwise, only - * code running at PL 1 or above will be allowed to do so. - * - * This bit should not be modified by the client while PRESENT is set, as - * doing so may race with the hypervisor's update of ACCESSED and DIRTY bits. - * - * This bit is ignored in level-1 PTEs unless the Page bit is set. - */ -#define HV_PTE_USER (__HV_PTE_ONE << HV_PTE_INDEX_USER) - -/** Has this mapping been accessed? - * - * This bit is set by the hypervisor when the memory described by the - * translation is accessed for the first time. It is never cleared by - * the hypervisor, but may be cleared by the client. After the bit - * has been cleared, subsequent references are not guaranteed to set - * it again until the translation has been flushed from the TLB. - * - * This bit is ignored in level-1 PTEs unless the Page bit is set. - */ -#define HV_PTE_ACCESSED (__HV_PTE_ONE << HV_PTE_INDEX_ACCESSED) - -/** Is this mapping dirty? - * - * This bit is set by the hypervisor when the memory described by the - * translation is written for the first time. It is never cleared by - * the hypervisor, but may be cleared by the client. After the bit - * has been cleared, subsequent references are not guaranteed to set - * it again until the translation has been flushed from the TLB. - * - * This bit is ignored in level-1 PTEs unless the Page bit is set. - */ -#define HV_PTE_DIRTY (__HV_PTE_ONE << HV_PTE_INDEX_DIRTY) - -/** Migrating bit in PTE. - * - * This bit is guaranteed not to be inspected or modified by the - * hypervisor. The name is indicative of the suggested use by the client - * to tag pages whose L3 cache is being migrated from one cpu to another. - */ -#define HV_PTE_MIGRATING (__HV_PTE_ONE << HV_PTE_INDEX_MIGRATING) - -/** Client-private bit in PTE. - * - * This bit is guaranteed not to be inspected or modified by the - * hypervisor. - */ -#define HV_PTE_CLIENT0 (__HV_PTE_ONE << HV_PTE_INDEX_CLIENT0) - -/** Client-private bit in PTE. - * - * This bit is guaranteed not to be inspected or modified by the - * hypervisor. - */ -#define HV_PTE_CLIENT1 (__HV_PTE_ONE << HV_PTE_INDEX_CLIENT1) - -/** Client-private bit in PTE. - * - * This bit is guaranteed not to be inspected or modified by the - * hypervisor. - */ -#define HV_PTE_CLIENT2 (__HV_PTE_ONE << HV_PTE_INDEX_CLIENT2) - -/** Non-coherent (NC) bit in PTE. - * - * If this bit is set, the mapping that is set up will be non-coherent - * (also known as non-inclusive). This means that changes to the L3 - * cache will not cause a local copy to be invalidated. It is generally - * recommended only for read-only mappings. - * - * In level-1 PTEs, if the Page bit is clear, this bit determines how the - * level-2 page table is accessed. - */ -#define HV_PTE_NC (__HV_PTE_ONE << HV_PTE_INDEX_NC) - -/** Is this page prevented from filling the L1$? - * - * If this bit is set, the page described by the PTE will not be cached - * the local cpu's L1 cache. - * - * If CHIP_HAS_NC_AND_NOALLOC_BITS() is not true in <chip.h> for this chip, - * it is illegal to use this attribute, and may cause client termination. - * - * In level-1 PTEs, if the Page bit is clear, this bit - * determines how the level-2 page table is accessed. - */ -#define HV_PTE_NO_ALLOC_L1 (__HV_PTE_ONE << HV_PTE_INDEX_NO_ALLOC_L1) - -/** Is this page prevented from filling the L2$? - * - * If this bit is set, the page described by the PTE will not be cached - * the local cpu's L2 cache. - * - * If CHIP_HAS_NC_AND_NOALLOC_BITS() is not true in <chip.h> for this chip, - * it is illegal to use this attribute, and may cause client termination. - * - * In level-1 PTEs, if the Page bit is clear, this bit determines how the - * level-2 page table is accessed. - */ -#define HV_PTE_NO_ALLOC_L2 (__HV_PTE_ONE << HV_PTE_INDEX_NO_ALLOC_L2) - -/** Is this a priority page? - * - * If this bit is set, the page described by the PTE will be given - * priority in the cache. Normally this translates into allowing the - * page to use only the "red" half of the cache. The client may wish to - * then use the hv_set_caching service to specify that other pages which - * alias this page will use only the "black" half of the cache. - * - * If the Cached Priority bit is clear, the hypervisor uses the - * current hv_set_caching() value to choose how to cache the page. - * - * It is illegal to set the Cached Priority bit if the Non-Cached bit - * is set and the Cached Remotely bit is clear, i.e. if requests to - * the page map directly to memory. - * - * This bit is ignored in level-1 PTEs unless the Page bit is set. - */ -#define HV_PTE_CACHED_PRIORITY (__HV_PTE_ONE << \ - HV_PTE_INDEX_CACHED_PRIORITY) - -/** Is this a readable mapping? - * - * If this bit is set, code will be permitted to read from (e.g., - * issue load instructions against) the virtual addresses mapped by - * this PTE. - * - * It is illegal for this bit to be clear if the Writable bit is set. - * - * This bit is ignored in level-1 PTEs unless the Page bit is set. - */ -#define HV_PTE_READABLE (__HV_PTE_ONE << HV_PTE_INDEX_READABLE) - -/** Is this a writable mapping? - * - * If this bit is set, code will be permitted to write to (e.g., issue - * store instructions against) the virtual addresses mapped by this - * PTE. - * - * This bit is ignored in level-1 PTEs unless the Page bit is set. - */ -#define HV_PTE_WRITABLE (__HV_PTE_ONE << HV_PTE_INDEX_WRITABLE) - -/** Is this an executable mapping? - * - * If this bit is set, code will be permitted to execute from - * (e.g., jump to) the virtual addresses mapped by this PTE. - * - * This bit applies to any processor on the tile, if there are more - * than one. - * - * This bit is ignored in level-1 PTEs unless the Page bit is set. - */ -#define HV_PTE_EXECUTABLE (__HV_PTE_ONE << HV_PTE_INDEX_EXECUTABLE) - -/** The width of a LOTAR's x or y bitfield. */ -#define HV_LOTAR_WIDTH 11 - -/** Converts an x,y pair to a LOTAR value. */ -#define HV_XY_TO_LOTAR(x, y) ((HV_LOTAR)(((x) << HV_LOTAR_WIDTH) | (y))) - -/** Extracts the X component of a lotar. */ -#define HV_LOTAR_X(lotar) ((lotar) >> HV_LOTAR_WIDTH) - -/** Extracts the Y component of a lotar. */ -#define HV_LOTAR_Y(lotar) ((lotar) & ((1 << HV_LOTAR_WIDTH) - 1)) - -#ifndef __ASSEMBLER__ - -/** Define accessor functions for a PTE bit. */ -#define _HV_BIT(name, bit) \ -static __inline int \ -hv_pte_get_##name(HV_PTE pte) \ -{ \ - return (pte.val >> HV_PTE_INDEX_##bit) & 1; \ -} \ - \ -static __inline HV_PTE \ -hv_pte_set_##name(HV_PTE pte) \ -{ \ - pte.val |= 1ULL << HV_PTE_INDEX_##bit; \ - return pte; \ -} \ - \ -static __inline HV_PTE \ -hv_pte_clear_##name(HV_PTE pte) \ -{ \ - pte.val &= ~(1ULL << HV_PTE_INDEX_##bit); \ - return pte; \ -} - -/* Generate accessors to get, set, and clear various PTE flags. - */ -_HV_BIT(present, PRESENT) -_HV_BIT(page, PAGE) -_HV_BIT(super, SUPER) -_HV_BIT(client0, CLIENT0) -_HV_BIT(client1, CLIENT1) -_HV_BIT(client2, CLIENT2) -_HV_BIT(migrating, MIGRATING) -_HV_BIT(nc, NC) -_HV_BIT(readable, READABLE) -_HV_BIT(writable, WRITABLE) -_HV_BIT(executable, EXECUTABLE) -_HV_BIT(accessed, ACCESSED) -_HV_BIT(dirty, DIRTY) -_HV_BIT(no_alloc_l1, NO_ALLOC_L1) -_HV_BIT(no_alloc_l2, NO_ALLOC_L2) -_HV_BIT(cached_priority, CACHED_PRIORITY) -_HV_BIT(global, GLOBAL) -_HV_BIT(user, USER) - -#undef _HV_BIT - -/** Get the page mode from the PTE. - * - * This field generally determines whether and how accesses to the page - * are cached; the HV_PTE_MODE_xxx symbols define the legal values for the - * page mode. The NC, NO_ALLOC_L1, and NO_ALLOC_L2 bits modify this - * general policy. - */ -static __inline unsigned int -hv_pte_get_mode(const HV_PTE pte) -{ - return (((__hv32) pte.val) >> HV_PTE_INDEX_MODE) & - ((1 << HV_PTE_MODE_BITS) - 1); -} - -/** Set the page mode into a PTE. See hv_pte_get_mode. */ -static __inline HV_PTE -hv_pte_set_mode(HV_PTE pte, unsigned int val) -{ - pte.val &= ~(((1ULL << HV_PTE_MODE_BITS) - 1) << HV_PTE_INDEX_MODE); - pte.val |= val << HV_PTE_INDEX_MODE; - return pte; -} - -/** Get the page frame number from the PTE. - * - * This field contains the upper bits of the CPA (client physical - * address) of the target page; the complete CPA is this field with - * HV_LOG2_PAGE_TABLE_ALIGN zero bits appended to it. - * - * For all PTEs in the lowest-level page table, and for all PTEs with - * the Page bit set in all page tables, the CPA must be aligned modulo - * the relevant page size. - */ -static __inline unsigned long -hv_pte_get_ptfn(const HV_PTE pte) -{ - return pte.val >> HV_PTE_INDEX_PTFN; -} - -/** Set the page table frame number into a PTE. See hv_pte_get_ptfn. */ -static __inline HV_PTE -hv_pte_set_ptfn(HV_PTE pte, unsigned long val) -{ - pte.val &= ~(((1ULL << HV_PTE_PTFN_BITS)-1) << HV_PTE_INDEX_PTFN); - pte.val |= (__hv64) val << HV_PTE_INDEX_PTFN; - return pte; -} - -/** Get the client physical address from the PTE. See hv_pte_set_ptfn. */ -static __inline HV_PhysAddr -hv_pte_get_pa(const HV_PTE pte) -{ - return (__hv64) hv_pte_get_ptfn(pte) << HV_LOG2_PAGE_TABLE_ALIGN; -} - -/** Set the client physical address into a PTE. See hv_pte_get_ptfn. */ -static __inline HV_PTE -hv_pte_set_pa(HV_PTE pte, HV_PhysAddr pa) -{ - return hv_pte_set_ptfn(pte, pa >> HV_LOG2_PAGE_TABLE_ALIGN); -} - - -/** Get the remote tile caching this page. - * - * Specifies the remote tile which is providing the L3 cache for this page. - * - * This field is ignored unless the page mode is HV_PTE_MODE_CACHE_TILE_L3. - * - * In level-1 PTEs, if the Page bit is clear, this field determines how the - * level-2 page table is accessed. - */ -static __inline unsigned int -hv_pte_get_lotar(const HV_PTE pte) -{ - unsigned int lotar = ((__hv32) pte.val) >> HV_PTE_INDEX_LOTAR; - - return HV_XY_TO_LOTAR( (lotar >> (HV_PTE_LOTAR_BITS / 2)), - (lotar & ((1 << (HV_PTE_LOTAR_BITS / 2)) - 1)) ); -} - - -/** Set the remote tile caching a page into a PTE. See hv_pte_get_lotar. */ -static __inline HV_PTE -hv_pte_set_lotar(HV_PTE pte, unsigned int val) -{ - unsigned int x = HV_LOTAR_X(val); - unsigned int y = HV_LOTAR_Y(val); - - pte.val &= ~(((1ULL << HV_PTE_LOTAR_BITS)-1) << HV_PTE_INDEX_LOTAR); - pte.val |= (x << (HV_PTE_INDEX_LOTAR + HV_PTE_LOTAR_BITS / 2)) | - (y << HV_PTE_INDEX_LOTAR); - return pte; -} - -#endif /* !__ASSEMBLER__ */ - -/** Converts a client physical address to a ptfn. */ -#define HV_CPA_TO_PTFN(p) ((p) >> HV_LOG2_PAGE_TABLE_ALIGN) - -/** Converts a ptfn to a client physical address. */ -#define HV_PTFN_TO_CPA(p) (((HV_PhysAddr)(p)) << HV_LOG2_PAGE_TABLE_ALIGN) - -#if CHIP_VA_WIDTH() > 32 - -/* - * Note that we currently do not allow customizing the page size - * of the L0 pages, but fix them at 4GB, so we do not use the - * "_HV_xxx" nomenclature for the L0 macros. - */ - -/** Log number of HV_PTE entries in L0 page table */ -#define HV_LOG2_L0_ENTRIES (CHIP_VA_WIDTH() - HV_LOG2_L1_SPAN) - -/** Number of HV_PTE entries in L0 page table */ -#define HV_L0_ENTRIES (1 << HV_LOG2_L0_ENTRIES) - -/** Log size of L0 page table in bytes */ -#define HV_LOG2_L0_SIZE (HV_LOG2_PTE_SIZE + HV_LOG2_L0_ENTRIES) - -/** Size of L0 page table in bytes */ -#define HV_L0_SIZE (1 << HV_LOG2_L0_SIZE) - -#ifdef __ASSEMBLER__ - -/** Index in L0 for a specific VA */ -#define HV_L0_INDEX(va) \ - (((va) >> HV_LOG2_L1_SPAN) & (HV_L0_ENTRIES - 1)) - -#else - -/** Index in L1 for a specific VA */ -#define HV_L0_INDEX(va) \ - (((HV_VirtAddr)(va) >> HV_LOG2_L1_SPAN) & (HV_L0_ENTRIES - 1)) - -#endif - -#endif /* CHIP_VA_WIDTH() > 32 */ - -/** Log number of HV_PTE entries in L1 page table */ -#define _HV_LOG2_L1_ENTRIES(log2_page_size_large) \ - (HV_LOG2_L1_SPAN - log2_page_size_large) - -/** Number of HV_PTE entries in L1 page table */ -#define _HV_L1_ENTRIES(log2_page_size_large) \ - (1 << _HV_LOG2_L1_ENTRIES(log2_page_size_large)) - -/** Log size of L1 page table in bytes */ -#define _HV_LOG2_L1_SIZE(log2_page_size_large) \ - (HV_LOG2_PTE_SIZE + _HV_LOG2_L1_ENTRIES(log2_page_size_large)) - -/** Size of L1 page table in bytes */ -#define _HV_L1_SIZE(log2_page_size_large) \ - (1 << _HV_LOG2_L1_SIZE(log2_page_size_large)) - -/** Log number of HV_PTE entries in level-2 page table */ -#define _HV_LOG2_L2_ENTRIES(log2_page_size_large, log2_page_size_small) \ - (log2_page_size_large - log2_page_size_small) - -/** Number of HV_PTE entries in level-2 page table */ -#define _HV_L2_ENTRIES(log2_page_size_large, log2_page_size_small) \ - (1 << _HV_LOG2_L2_ENTRIES(log2_page_size_large, log2_page_size_small)) - -/** Log size of level-2 page table in bytes */ -#define _HV_LOG2_L2_SIZE(log2_page_size_large, log2_page_size_small) \ - (HV_LOG2_PTE_SIZE + \ - _HV_LOG2_L2_ENTRIES(log2_page_size_large, log2_page_size_small)) - -/** Size of level-2 page table in bytes */ -#define _HV_L2_SIZE(log2_page_size_large, log2_page_size_small) \ - (1 << _HV_LOG2_L2_SIZE(log2_page_size_large, log2_page_size_small)) - -#ifdef __ASSEMBLER__ - -#if CHIP_VA_WIDTH() > 32 - -/** Index in L1 for a specific VA */ -#define _HV_L1_INDEX(va, log2_page_size_large) \ - (((va) >> log2_page_size_large) & (_HV_L1_ENTRIES(log2_page_size_large) - 1)) - -#else /* CHIP_VA_WIDTH() > 32 */ - -/** Index in L1 for a specific VA */ -#define _HV_L1_INDEX(va, log2_page_size_large) \ - (((va) >> log2_page_size_large)) - -#endif /* CHIP_VA_WIDTH() > 32 */ - -/** Index in level-2 page table for a specific VA */ -#define _HV_L2_INDEX(va, log2_page_size_large, log2_page_size_small) \ - (((va) >> log2_page_size_small) & \ - (_HV_L2_ENTRIES(log2_page_size_large, log2_page_size_small) - 1)) - -#else /* __ASSEMBLER __ */ - -#if CHIP_VA_WIDTH() > 32 - -/** Index in L1 for a specific VA */ -#define _HV_L1_INDEX(va, log2_page_size_large) \ - (((HV_VirtAddr)(va) >> log2_page_size_large) & \ - (_HV_L1_ENTRIES(log2_page_size_large) - 1)) - -#else /* CHIP_VA_WIDTH() > 32 */ - -/** Index in L1 for a specific VA */ -#define _HV_L1_INDEX(va, log2_page_size_large) \ - (((HV_VirtAddr)(va) >> log2_page_size_large)) - -#endif /* CHIP_VA_WIDTH() > 32 */ - -/** Index in level-2 page table for a specific VA */ -#define _HV_L2_INDEX(va, log2_page_size_large, log2_page_size_small) \ - (((HV_VirtAddr)(va) >> log2_page_size_small) & \ - (_HV_L2_ENTRIES(log2_page_size_large, log2_page_size_small) - 1)) - -#endif /* __ASSEMBLER __ */ - -/** Position of the PFN field within the PTE (subset of the PTFN). */ -#define _HV_PTE_INDEX_PFN(log2_page_size) \ - (HV_PTE_INDEX_PTFN + (log2_page_size - HV_LOG2_PAGE_TABLE_ALIGN)) - -/** Length of the PFN field within the PTE (subset of the PTFN). */ -#define _HV_PTE_INDEX_PFN_BITS(log2_page_size) \ - (HV_PTE_INDEX_PTFN_BITS - (log2_page_size - HV_LOG2_PAGE_TABLE_ALIGN)) - -/** Converts a client physical address to a pfn. */ -#define _HV_CPA_TO_PFN(p, log2_page_size) ((p) >> log2_page_size) - -/** Converts a pfn to a client physical address. */ -#define _HV_PFN_TO_CPA(p, log2_page_size) \ - (((HV_PhysAddr)(p)) << log2_page_size) - -/** Converts a ptfn to a pfn. */ -#define _HV_PTFN_TO_PFN(p, log2_page_size) \ - ((p) >> (log2_page_size - HV_LOG2_PAGE_TABLE_ALIGN)) - -/** Converts a pfn to a ptfn. */ -#define _HV_PFN_TO_PTFN(p, log2_page_size) \ - ((p) << (log2_page_size - HV_LOG2_PAGE_TABLE_ALIGN)) - -#endif /* _HV_HV_H */ |