diff options
Diffstat (limited to 'arch/tile/kernel/head_64.S')
| -rw-r--r-- | arch/tile/kernel/head_64.S | 279 |
1 files changed, 0 insertions, 279 deletions
diff --git a/arch/tile/kernel/head_64.S b/arch/tile/kernel/head_64.S deleted file mode 100644 index bd0e12f283f3..000000000000 --- a/arch/tile/kernel/head_64.S +++ /dev/null @@ -1,279 +0,0 @@ -/* - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * TILE startup code. - */ - -#include <linux/linkage.h> -#include <linux/init.h> -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/thread_info.h> -#include <asm/processor.h> -#include <asm/asm-offsets.h> -#include <hv/hypervisor.h> -#include <arch/chip.h> -#include <arch/spr_def.h> - -/* Extract two 32-bit bit values that were read into one register. */ -#ifdef __BIG_ENDIAN__ -#define GET_FIRST_INT(rd, rs) shrsi rd, rs, 32 -#define GET_SECOND_INT(rd, rs) addxi rd, rs, 0 -#else -#define GET_FIRST_INT(rd, rs) addxi rd, rs, 0 -#define GET_SECOND_INT(rd, rs) shrsi rd, rs, 32 -#endif - -/* - * This module contains the entry code for kernel images. It performs the - * minimal setup needed to call the generic C routines. - */ - - __HEAD -ENTRY(_start) - /* Notify the hypervisor of what version of the API we want */ - { -#if KERNEL_PL == 1 && _HV_VERSION == 13 - /* Support older hypervisors by asking for API version 12. */ - movei r0, _HV_VERSION_OLD_HV_INIT -#else - movei r0, _HV_VERSION -#endif - movei r1, TILE_CHIP - } - { - movei r2, TILE_CHIP_REV - movei r3, KERNEL_PL - } - jal _hv_init - /* Get a reasonable default ASID in r0 */ - { - move r0, zero - jal _hv_inquire_asid - } - - /* - * Install the default page table. The relocation required to - * statically define the table is a bit too complex, so we have - * to plug in the pointer from the L0 to the L1 table by hand. - * We only do this on the first cpu to boot, though, since the - * other CPUs should see a properly-constructed page table. - */ - { - GET_FIRST_INT(r2, r0) /* ASID for hv_install_context */ - moveli r4, hw1_last(swapper_pgprot - PAGE_OFFSET) - } - { - shl16insli r4, r4, hw0(swapper_pgprot - PAGE_OFFSET) - } - { - ld r1, r4 /* access_pte for hv_install_context */ - } - { - moveli r0, hw1_last(.Lsv_data_pmd - PAGE_OFFSET) - moveli r6, hw1_last(temp_data_pmd - PAGE_OFFSET) - } - { - /* After initializing swapper_pgprot, HV_PTE_GLOBAL is set. */ - bfextu r7, r1, HV_PTE_INDEX_GLOBAL, HV_PTE_INDEX_GLOBAL - finv r4 - } - bnez r7, .Lno_write - { - shl16insli r0, r0, hw0(.Lsv_data_pmd - PAGE_OFFSET) - shl16insli r6, r6, hw0(temp_data_pmd - PAGE_OFFSET) - } - { - /* Cut off the low bits of the PT address. */ - shrui r6, r6, HV_LOG2_PAGE_TABLE_ALIGN - /* Start with our access pte. */ - move r5, r1 - } - { - /* Stuff the address into the page table pointer slot of the PTE. */ - bfins r5, r6, HV_PTE_INDEX_PTFN, \ - HV_PTE_INDEX_PTFN + HV_PTE_PTFN_BITS - 1 - } - { - /* Store the L0 data PTE. */ - st r0, r5 - addli r6, r6, (temp_code_pmd - temp_data_pmd) >> \ - HV_LOG2_PAGE_TABLE_ALIGN - } - { - addli r0, r0, .Lsv_code_pmd - .Lsv_data_pmd - bfins r5, r6, HV_PTE_INDEX_PTFN, \ - HV_PTE_INDEX_PTFN + HV_PTE_PTFN_BITS - 1 - } - /* Store the L0 code PTE. */ - st r0, r5 - -.Lno_write: - moveli lr, hw2_last(1f) - { - shl16insli lr, lr, hw1(1f) - moveli r0, hw1_last(swapper_pg_dir - PAGE_OFFSET) - } - { - shl16insli lr, lr, hw0(1f) - shl16insli r0, r0, hw0(swapper_pg_dir - PAGE_OFFSET) - } - { - moveli r3, CTX_PAGE_FLAG - j _hv_install_context - } -1: - - /* Install the interrupt base. */ - moveli r0, hw2_last(intrpt_start) - shl16insli r0, r0, hw1(intrpt_start) - shl16insli r0, r0, hw0(intrpt_start) - mtspr SPR_INTERRUPT_VECTOR_BASE_K, r0 - - /* Get our processor number and save it away in SAVE_K_0. */ - jal _hv_inquire_topology - { - GET_FIRST_INT(r5, r1) /* r5 = width */ - GET_SECOND_INT(r4, r0) /* r4 = y */ - } - { - GET_FIRST_INT(r6, r0) /* r6 = x */ - mul_lu_lu r4, r4, r5 - } - { - add r4, r4, r6 /* r4 == cpu == y*width + x */ - } - -#ifdef CONFIG_SMP - /* - * Load up our per-cpu offset. When the first (master) tile - * boots, this value is still zero, so we will load boot_pc - * with start_kernel, and boot_sp with at the top of init_stack. - * The master tile initializes the per-cpu offset array, so that - * when subsequent (secondary) tiles boot, they will instead load - * from their per-cpu versions of boot_sp and boot_pc. - */ - moveli r5, hw2_last(__per_cpu_offset) - shl16insli r5, r5, hw1(__per_cpu_offset) - shl16insli r5, r5, hw0(__per_cpu_offset) - shl3add r5, r4, r5 - ld r5, r5 - bnez r5, 1f - - /* - * Save the width and height to the smp_topology variable - * for later use. - */ - moveli r0, hw2_last(smp_topology + HV_TOPOLOGY_WIDTH_OFFSET) - shl16insli r0, r0, hw1(smp_topology + HV_TOPOLOGY_WIDTH_OFFSET) - shl16insli r0, r0, hw0(smp_topology + HV_TOPOLOGY_WIDTH_OFFSET) - st r0, r1 -1: -#else - move r5, zero -#endif - - /* Load and go with the correct pc and sp. */ - { - moveli r1, hw2_last(boot_sp) - moveli r0, hw2_last(boot_pc) - } - { - shl16insli r1, r1, hw1(boot_sp) - shl16insli r0, r0, hw1(boot_pc) - } - { - shl16insli r1, r1, hw0(boot_sp) - shl16insli r0, r0, hw0(boot_pc) - } - { - add r1, r1, r5 - add r0, r0, r5 - } - ld r0, r0 - ld sp, r1 - shli r4, r4, CPU_SHIFT - bfins r4, sp, 0, CPU_SHIFT-1 - mtspr SPR_SYSTEM_SAVE_K_0, r4 /* save ksp0 + cpu */ - { - move lr, zero /* stop backtraces in the called function */ - jr r0 - } - ENDPROC(_start) - -__PAGE_ALIGNED_BSS - .align PAGE_SIZE -ENTRY(empty_zero_page) - .fill PAGE_SIZE,1,0 - END(empty_zero_page) - - .macro PTE cpa, bits1 - .quad HV_PTE_PAGE | HV_PTE_DIRTY | HV_PTE_PRESENT | HV_PTE_ACCESSED |\ - HV_PTE_GLOBAL | (HV_PTE_MODE_CACHE_NO_L3 << HV_PTE_INDEX_MODE) |\ - (\bits1) | (HV_CPA_TO_PTFN(\cpa) << HV_PTE_INDEX_PTFN) - .endm - -__PAGE_ALIGNED_DATA - .align PAGE_SIZE -ENTRY(swapper_pg_dir) - .org swapper_pg_dir + PGD_INDEX(PAGE_OFFSET) * HV_PTE_SIZE -.Lsv_data_pmd: - .quad 0 /* PTE temp_data_pmd - PAGE_OFFSET, 0 */ - .org swapper_pg_dir + PGD_INDEX(MEM_SV_START) * HV_PTE_SIZE -.Lsv_code_pmd: - .quad 0 /* PTE temp_code_pmd - PAGE_OFFSET, 0 */ - .org swapper_pg_dir + SIZEOF_PGD - END(swapper_pg_dir) - - .align HV_PAGE_TABLE_ALIGN -ENTRY(temp_data_pmd) - /* - * We fill the PAGE_OFFSET pmd with huge pages with - * VA = PA + PAGE_OFFSET. We remap things with more precise access - * permissions later. - */ - .set addr, 0 - .rept PTRS_PER_PMD - PTE addr, HV_PTE_READABLE | HV_PTE_WRITABLE - .set addr, addr + HPAGE_SIZE - .endr - .org temp_data_pmd + SIZEOF_PMD - END(temp_data_pmd) - - .align HV_PAGE_TABLE_ALIGN -ENTRY(temp_code_pmd) - /* - * We fill the MEM_SV_START pmd with huge pages with - * VA = PA + PAGE_OFFSET. We remap things with more precise access - * permissions later. - */ - .set addr, 0 - .rept PTRS_PER_PMD - PTE addr, HV_PTE_READABLE | HV_PTE_EXECUTABLE - .set addr, addr + HPAGE_SIZE - .endr - .org temp_code_pmd + SIZEOF_PMD - END(temp_code_pmd) - - /* - * Isolate swapper_pgprot to its own cache line, since each cpu - * starting up will read it using VA-is-PA and local homing. - * This would otherwise likely conflict with other data on the cache - * line, once we have set its permanent home in the page tables. - */ - __INITDATA - .align CHIP_L2_LINE_SIZE() -ENTRY(swapper_pgprot) - .quad HV_PTE_PRESENT | (HV_PTE_MODE_CACHE_NO_L3 << HV_PTE_INDEX_MODE) - .align CHIP_L2_LINE_SIZE() - END(swapper_pgprot) |