diff options
Diffstat (limited to 'arch/tile/kernel/setup.c')
| -rw-r--r-- | arch/tile/kernel/setup.c | 1511 |
1 files changed, 1511 insertions, 0 deletions
diff --git a/arch/tile/kernel/setup.c b/arch/tile/kernel/setup.c new file mode 100644 index 000000000000..e7d54c73d5c1 --- /dev/null +++ b/arch/tile/kernel/setup.c @@ -0,0 +1,1511 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/mmzone.h> +#include <linux/bootmem.h> +#include <linux/module.h> +#include <linux/node.h> +#include <linux/cpu.h> +#include <linux/ioport.h> +#include <linux/irq.h> +#include <linux/kexec.h> +#include <linux/pci.h> +#include <linux/initrd.h> +#include <linux/io.h> +#include <linux/highmem.h> +#include <linux/smp.h> +#include <linux/timex.h> +#include <asm/setup.h> +#include <asm/sections.h> +#include <asm/sections.h> +#include <asm/cacheflush.h> +#include <asm/cacheflush.h> +#include <asm/pgalloc.h> +#include <asm/mmu_context.h> +#include <hv/hypervisor.h> +#include <arch/interrupts.h> + +/* <linux/smp.h> doesn't provide this definition. */ +#ifndef CONFIG_SMP +#define setup_max_cpus 1 +#endif + +static inline int ABS(int x) { return x >= 0 ? x : -x; } + +/* Chip information */ +char chip_model[64] __write_once; + +struct pglist_data node_data[MAX_NUMNODES] __read_mostly; +EXPORT_SYMBOL(node_data); + +/* We only create bootmem data on node 0. */ +static bootmem_data_t __initdata node0_bdata; + +/* Information on the NUMA nodes that we compute early */ +unsigned long __cpuinitdata node_start_pfn[MAX_NUMNODES]; +unsigned long __cpuinitdata node_end_pfn[MAX_NUMNODES]; +unsigned long __initdata node_memmap_pfn[MAX_NUMNODES]; +unsigned long __initdata node_percpu_pfn[MAX_NUMNODES]; +unsigned long __initdata node_free_pfn[MAX_NUMNODES]; + +#ifdef CONFIG_HIGHMEM +/* Page frame index of end of lowmem on each controller. */ +unsigned long __cpuinitdata node_lowmem_end_pfn[MAX_NUMNODES]; + +/* Number of pages that can be mapped into lowmem. */ +static unsigned long __initdata mappable_physpages; +#endif + +/* Data on which physical memory controller corresponds to which NUMA node */ +int node_controller[MAX_NUMNODES] = { [0 ... MAX_NUMNODES-1] = -1 }; + +#ifdef CONFIG_HIGHMEM +/* Map information from VAs to PAs */ +unsigned long pbase_map[1 << (32 - HPAGE_SHIFT)] + __write_once __attribute__((aligned(L2_CACHE_BYTES))); +EXPORT_SYMBOL(pbase_map); + +/* Map information from PAs to VAs */ +void *vbase_map[NR_PA_HIGHBIT_VALUES] + __write_once __attribute__((aligned(L2_CACHE_BYTES))); +EXPORT_SYMBOL(vbase_map); +#endif + +/* Node number as a function of the high PA bits */ +int highbits_to_node[NR_PA_HIGHBIT_VALUES] __write_once; +EXPORT_SYMBOL(highbits_to_node); + +static unsigned int __initdata maxmem_pfn = -1U; +static unsigned int __initdata maxnodemem_pfn[MAX_NUMNODES] = { + [0 ... MAX_NUMNODES-1] = -1U +}; +static nodemask_t __initdata isolnodes; + +#ifdef CONFIG_PCI +enum { DEFAULT_PCI_RESERVE_MB = 64 }; +static unsigned int __initdata pci_reserve_mb = DEFAULT_PCI_RESERVE_MB; +unsigned long __initdata pci_reserve_start_pfn = -1U; +unsigned long __initdata pci_reserve_end_pfn = -1U; +#endif + +static int __init setup_maxmem(char *str) +{ + long maxmem_mb; + if (str == NULL || strict_strtol(str, 0, &maxmem_mb) != 0 || + maxmem_mb == 0) + return -EINVAL; + + maxmem_pfn = (maxmem_mb >> (HPAGE_SHIFT - 20)) << + (HPAGE_SHIFT - PAGE_SHIFT); + pr_info("Forcing RAM used to no more than %dMB\n", + maxmem_pfn >> (20 - PAGE_SHIFT)); + return 0; +} +early_param("maxmem", setup_maxmem); + +static int __init setup_maxnodemem(char *str) +{ + char *endp; + long maxnodemem_mb, node; + + node = str ? simple_strtoul(str, &endp, 0) : INT_MAX; + if (node >= MAX_NUMNODES || *endp != ':' || + strict_strtol(endp+1, 0, &maxnodemem_mb) != 0) + return -EINVAL; + + maxnodemem_pfn[node] = (maxnodemem_mb >> (HPAGE_SHIFT - 20)) << + (HPAGE_SHIFT - PAGE_SHIFT); + pr_info("Forcing RAM used on node %ld to no more than %dMB\n", + node, maxnodemem_pfn[node] >> (20 - PAGE_SHIFT)); + return 0; +} +early_param("maxnodemem", setup_maxnodemem); + +static int __init setup_isolnodes(char *str) +{ + char buf[MAX_NUMNODES * 5]; + if (str == NULL || nodelist_parse(str, isolnodes) != 0) + return -EINVAL; + + nodelist_scnprintf(buf, sizeof(buf), isolnodes); + pr_info("Set isolnodes value to '%s'\n", buf); + return 0; +} +early_param("isolnodes", setup_isolnodes); + +#ifdef CONFIG_PCI +static int __init setup_pci_reserve(char* str) +{ + unsigned long mb; + + if (str == NULL || strict_strtoul(str, 0, &mb) != 0 || + mb > 3 * 1024) + return -EINVAL; + + pci_reserve_mb = mb; + pr_info("Reserving %dMB for PCIE root complex mappings\n", + pci_reserve_mb); + return 0; +} +early_param("pci_reserve", setup_pci_reserve); +#endif + +#ifndef __tilegx__ +/* + * vmalloc=size forces the vmalloc area to be exactly 'size' bytes. + * This can be used to increase (or decrease) the vmalloc area. + */ +static int __init parse_vmalloc(char *arg) +{ + if (!arg) + return -EINVAL; + + VMALLOC_RESERVE = (memparse(arg, &arg) + PGDIR_SIZE - 1) & PGDIR_MASK; + + /* See validate_va() for more on this test. */ + if ((long)_VMALLOC_START >= 0) + early_panic("\"vmalloc=%#lx\" value too large: maximum %#lx\n", + VMALLOC_RESERVE, _VMALLOC_END - 0x80000000UL); + + return 0; +} +early_param("vmalloc", parse_vmalloc); +#endif + +#ifdef CONFIG_HIGHMEM +/* + * Determine for each controller where its lowmem is mapped and how + * much of it is mapped there. On controller zero, the first few + * megabytes are mapped at 0xfd000000 as code, so in principle we + * could start our data mappings higher up, but for now we don't + * bother, to avoid additional confusion. + * + * One question is whether, on systems with more than 768 Mb and + * controllers of different sizes, to map in a proportionate amount of + * each one, or to try to map the same amount from each controller. + * (E.g. if we have three controllers with 256MB, 1GB, and 256MB + * respectively, do we map 256MB from each, or do we map 128 MB, 512 + * MB, and 128 MB respectively?) For now we use a proportionate + * solution like the latter. + * + * The VA/PA mapping demands that we align our decisions at 16 MB + * boundaries so that we can rapidly convert VA to PA. + */ +static void *__init setup_pa_va_mapping(void) +{ + unsigned long curr_pages = 0; + unsigned long vaddr = PAGE_OFFSET; + nodemask_t highonlynodes = isolnodes; + int i, j; + + memset(pbase_map, -1, sizeof(pbase_map)); + memset(vbase_map, -1, sizeof(vbase_map)); + + /* Node zero cannot be isolated for LOWMEM purposes. */ + node_clear(0, highonlynodes); + + /* Count up the number of pages on non-highonlynodes controllers. */ + mappable_physpages = 0; + for_each_online_node(i) { + if (!node_isset(i, highonlynodes)) + mappable_physpages += + node_end_pfn[i] - node_start_pfn[i]; + } + + for_each_online_node(i) { + unsigned long start = node_start_pfn[i]; + unsigned long end = node_end_pfn[i]; + unsigned long size = end - start; + unsigned long vaddr_end; + + if (node_isset(i, highonlynodes)) { + /* Mark this controller as having no lowmem. */ + node_lowmem_end_pfn[i] = start; + continue; + } + + curr_pages += size; + if (mappable_physpages > MAXMEM_PFN) { + vaddr_end = PAGE_OFFSET + + (((u64)curr_pages * MAXMEM_PFN / + mappable_physpages) + << PAGE_SHIFT); + } else { + vaddr_end = PAGE_OFFSET + (curr_pages << PAGE_SHIFT); + } + for (j = 0; vaddr < vaddr_end; vaddr += HPAGE_SIZE, ++j) { + unsigned long this_pfn = + start + (j << HUGETLB_PAGE_ORDER); + pbase_map[vaddr >> HPAGE_SHIFT] = this_pfn; + if (vbase_map[__pfn_to_highbits(this_pfn)] == + (void *)-1) + vbase_map[__pfn_to_highbits(this_pfn)] = + (void *)(vaddr & HPAGE_MASK); + } + node_lowmem_end_pfn[i] = start + (j << HUGETLB_PAGE_ORDER); + BUG_ON(node_lowmem_end_pfn[i] > end); + } + + /* Return highest address of any mapped memory. */ + return (void *)vaddr; +} +#endif /* CONFIG_HIGHMEM */ + +/* + * Register our most important memory mappings with the debug stub. + * + * This is up to 4 mappings for lowmem, one mapping per memory + * controller, plus one for our text segment. + */ +static void __cpuinit store_permanent_mappings(void) +{ + int i; + + for_each_online_node(i) { + HV_PhysAddr pa = ((HV_PhysAddr)node_start_pfn[i]) << PAGE_SHIFT; +#ifdef CONFIG_HIGHMEM + HV_PhysAddr high_mapped_pa = node_lowmem_end_pfn[i]; +#else + HV_PhysAddr high_mapped_pa = node_end_pfn[i]; +#endif + + unsigned long pages = high_mapped_pa - node_start_pfn[i]; + HV_VirtAddr addr = (HV_VirtAddr) __va(pa); + hv_store_mapping(addr, pages << PAGE_SHIFT, pa); + } + + hv_store_mapping((HV_VirtAddr)_stext, + (uint32_t)(_einittext - _stext), 0); +} + +/* + * Use hv_inquire_physical() to populate node_{start,end}_pfn[] + * and node_online_map, doing suitable sanity-checking. + * Also set min_low_pfn, max_low_pfn, and max_pfn. + */ +static void __init setup_memory(void) +{ + int i, j; + int highbits_seen[NR_PA_HIGHBIT_VALUES] = { 0 }; +#ifdef CONFIG_HIGHMEM + long highmem_pages; +#endif +#ifndef __tilegx__ + int cap; +#endif +#if defined(CONFIG_HIGHMEM) || defined(__tilegx__) + long lowmem_pages; +#endif + + /* We are using a char to hold the cpu_2_node[] mapping */ + BUG_ON(MAX_NUMNODES > 127); + + /* Discover the ranges of memory available to us */ + for (i = 0; ; ++i) { + unsigned long start, size, end, highbits; + HV_PhysAddrRange range = hv_inquire_physical(i); + if (range.size == 0) + break; +#ifdef CONFIG_FLATMEM + if (i > 0) { + pr_err("Can't use discontiguous PAs: %#llx..%#llx\n", + range.size, range.start + range.size); + continue; + } +#endif +#ifndef __tilegx__ + if ((unsigned long)range.start) { + pr_err("Range not at 4GB multiple: %#llx..%#llx\n", + range.start, range.start + range.size); + continue; + } +#endif + if ((range.start & (HPAGE_SIZE-1)) != 0 || + (range.size & (HPAGE_SIZE-1)) != 0) { + unsigned long long start_pa = range.start; + unsigned long long orig_size = range.size; + range.start = (start_pa + HPAGE_SIZE - 1) & HPAGE_MASK; + range.size -= (range.start - start_pa); + range.size &= HPAGE_MASK; + pr_err("Range not hugepage-aligned: %#llx..%#llx:" + " now %#llx-%#llx\n", + start_pa, start_pa + orig_size, + range.start, range.start + range.size); + } + highbits = __pa_to_highbits(range.start); + if (highbits >= NR_PA_HIGHBIT_VALUES) { + pr_err("PA high bits too high: %#llx..%#llx\n", + range.start, range.start + range.size); + continue; + } + if (highbits_seen[highbits]) { + pr_err("Range overlaps in high bits: %#llx..%#llx\n", + range.start, range.start + range.size); + continue; + } + highbits_seen[highbits] = 1; + if (PFN_DOWN(range.size) > maxnodemem_pfn[i]) { + int max_size = maxnodemem_pfn[i]; + if (max_size > 0) { + pr_err("Maxnodemem reduced node %d to" + " %d pages\n", i, max_size); + range.size = PFN_PHYS(max_size); + } else { + pr_err("Maxnodemem disabled node %d\n", i); + continue; + } + } + if (num_physpages + PFN_DOWN(range.size) > maxmem_pfn) { + int max_size = maxmem_pfn - num_physpages; + if (max_size > 0) { + pr_err("Maxmem reduced node %d to %d pages\n", + i, max_size); + range.size = PFN_PHYS(max_size); + } else { + pr_err("Maxmem disabled node %d\n", i); + continue; + } + } + if (i >= MAX_NUMNODES) { + pr_err("Too many PA nodes (#%d): %#llx...%#llx\n", + i, range.size, range.size + range.start); + continue; + } + + start = range.start >> PAGE_SHIFT; + size = range.size >> PAGE_SHIFT; + end = start + size; + +#ifndef __tilegx__ + if (((HV_PhysAddr)end << PAGE_SHIFT) != + (range.start + range.size)) { + pr_err("PAs too high to represent: %#llx..%#llx\n", + range.start, range.start + range.size); + continue; + } +#endif +#ifdef CONFIG_PCI + /* + * Blocks that overlap the pci reserved region must + * have enough space to hold the maximum percpu data + * region at the top of the range. If there isn't + * enough space above the reserved region, just + * truncate the node. + */ + if (start <= pci_reserve_start_pfn && + end > pci_reserve_start_pfn) { + unsigned int per_cpu_size = + __per_cpu_end - __per_cpu_start; + unsigned int percpu_pages = + NR_CPUS * (PFN_UP(per_cpu_size) >> PAGE_SHIFT); + if (end < pci_reserve_end_pfn + percpu_pages) { + end = pci_reserve_start_pfn; + pr_err("PCI mapping region reduced node %d to" + " %ld pages\n", i, end - start); + } + } +#endif + + for (j = __pfn_to_highbits(start); + j <= __pfn_to_highbits(end - 1); j++) + highbits_to_node[j] = i; + + node_start_pfn[i] = start; + node_end_pfn[i] = end; + node_controller[i] = range.controller; + num_physpages += size; + max_pfn = end; + + /* Mark node as online */ + node_set(i, node_online_map); + node_set(i, node_possible_map); + } + +#ifndef __tilegx__ + /* + * For 4KB pages, mem_map "struct page" data is 1% of the size + * of the physical memory, so can be quite big (640 MB for + * four 16G zones). These structures must be mapped in + * lowmem, and since we currently cap out at about 768 MB, + * it's impractical to try to use this much address space. + * For now, arbitrarily cap the amount of physical memory + * we're willing to use at 8 million pages (32GB of 4KB pages). + */ + cap = 8 * 1024 * 1024; /* 8 million pages */ + if (num_physpages > cap) { + int num_nodes = num_online_nodes(); + int cap_each = cap / num_nodes; + unsigned long dropped_pages = 0; + for (i = 0; i < num_nodes; ++i) { + int size = node_end_pfn[i] - node_start_pfn[i]; + if (size > cap_each) { + dropped_pages += (size - cap_each); + node_end_pfn[i] = node_start_pfn[i] + cap_each; + } + } + num_physpages -= dropped_pages; + pr_warning("Only using %ldMB memory;" + " ignoring %ldMB.\n", + num_physpages >> (20 - PAGE_SHIFT), + dropped_pages >> (20 - PAGE_SHIFT)); + pr_warning("Consider using a larger page size.\n"); + } +#endif + + /* Heap starts just above the last loaded address. */ + min_low_pfn = PFN_UP((unsigned long)_end - PAGE_OFFSET); + +#ifdef CONFIG_HIGHMEM + /* Find where we map lowmem from each controller. */ + high_memory = setup_pa_va_mapping(); + + /* Set max_low_pfn based on what node 0 can directly address. */ + max_low_pfn = node_lowmem_end_pfn[0]; + + lowmem_pages = (mappable_physpages > MAXMEM_PFN) ? + MAXMEM_PFN : mappable_physpages; + highmem_pages = (long) (num_physpages - lowmem_pages); + + pr_notice("%ldMB HIGHMEM available.\n", + pages_to_mb(highmem_pages > 0 ? highmem_pages : 0)); + pr_notice("%ldMB LOWMEM available.\n", + pages_to_mb(lowmem_pages)); +#else + /* Set max_low_pfn based on what node 0 can directly address. */ + max_low_pfn = node_end_pfn[0]; + +#ifndef __tilegx__ + if (node_end_pfn[0] > MAXMEM_PFN) { + pr_warning("Only using %ldMB LOWMEM.\n", + MAXMEM>>20); + pr_warning("Use a HIGHMEM enabled kernel.\n"); + max_low_pfn = MAXMEM_PFN; + max_pfn = MAXMEM_PFN; + num_physpages = MAXMEM_PFN; + node_end_pfn[0] = MAXMEM_PFN; + } else { + pr_notice("%ldMB memory available.\n", + pages_to_mb(node_end_pfn[0])); + } + for (i = 1; i < MAX_NUMNODES; ++i) { + node_start_pfn[i] = 0; + node_end_pfn[i] = 0; + } + high_memory = __va(node_end_pfn[0]); +#else + lowmem_pages = 0; + for (i = 0; i < MAX_NUMNODES; ++i) { + int pages = node_end_pfn[i] - node_start_pfn[i]; + lowmem_pages += pages; + if (pages) + high_memory = pfn_to_kaddr(node_end_pfn[i]); + } + pr_notice("%ldMB memory available.\n", + pages_to_mb(lowmem_pages)); +#endif +#endif +} + +static void __init setup_bootmem_allocator(void) +{ + unsigned long bootmap_size, first_alloc_pfn, last_alloc_pfn; + + /* Provide a node 0 bdata. */ + NODE_DATA(0)->bdata = &node0_bdata; + +#ifdef CONFIG_PCI + /* Don't let boot memory alias the PCI region. */ + last_alloc_pfn = min(max_low_pfn, pci_reserve_start_pfn); +#else + last_alloc_pfn = max_low_pfn; +#endif + + /* + * Initialize the boot-time allocator (with low memory only): + * The first argument says where to put the bitmap, and the + * second says where the end of allocatable memory is. + */ + bootmap_size = init_bootmem(min_low_pfn, last_alloc_pfn); + + /* + * Let the bootmem allocator use all the space we've given it + * except for its own bitmap. + */ + first_alloc_pfn = min_low_pfn + PFN_UP(bootmap_size); + if (first_alloc_pfn >= last_alloc_pfn) + early_panic("Not enough memory on controller 0 for bootmem\n"); + + free_bootmem(PFN_PHYS(first_alloc_pfn), + PFN_PHYS(last_alloc_pfn - first_alloc_pfn)); + +#ifdef CONFIG_KEXEC + if (crashk_res.start != crashk_res.end) + reserve_bootmem(crashk_res.start, + crashk_res.end - crashk_res.start + 1, 0); +#endif + +} + +void *__init alloc_remap(int nid, unsigned long size) +{ + int pages = node_end_pfn[nid] - node_start_pfn[nid]; + void *map = pfn_to_kaddr(node_memmap_pfn[nid]); + BUG_ON(size != pages * sizeof(struct page)); + memset(map, 0, size); + return map; +} + +static int __init percpu_size(void) +{ + int size = ALIGN(__per_cpu_end - __per_cpu_start, PAGE_SIZE); +#ifdef CONFIG_MODULES + if (size < PERCPU_ENOUGH_ROOM) + size = PERCPU_ENOUGH_ROOM; +#endif + /* In several places we assume the per-cpu data fits on a huge page. */ + BUG_ON(kdata_huge && size > HPAGE_SIZE); + return size; +} + +static inline unsigned long alloc_bootmem_pfn(int size, unsigned long goal) +{ + void *kva = __alloc_bootmem(size, PAGE_SIZE, goal); + unsigned long pfn = kaddr_to_pfn(kva); + BUG_ON(goal && PFN_PHYS(pfn) != goal); + return pfn; +} + +static void __init zone_sizes_init(void) +{ + unsigned long zones_size[MAX_NR_ZONES] = { 0 }; + unsigned long node_percpu[MAX_NUMNODES] = { 0 }; + int size = percpu_size(); + int num_cpus = smp_height * smp_width; + int i; + + for (i = 0; i < num_cpus; ++i) + node_percpu[cpu_to_node(i)] += size; + + for_each_online_node(i) { + unsigned long start = node_start_pfn[i]; + unsigned long end = node_end_pfn[i]; +#ifdef CONFIG_HIGHMEM + unsigned long lowmem_end = node_lowmem_end_pfn[i]; +#else + unsigned long lowmem_end = end; +#endif + int memmap_size = (end - start) * sizeof(struct page); + node_free_pfn[i] = start; + + /* + * Set aside pages for per-cpu data and the mem_map array. + * + * Since the per-cpu data requires special homecaching, + * if we are in kdata_huge mode, we put it at the end of + * the lowmem region. If we're not in kdata_huge mode, + * we take the per-cpu pages from the bottom of the + * controller, since that avoids fragmenting a huge page + * that users might want. We always take the memmap + * from the bottom of the controller, since with + * kdata_huge that lets it be under a huge TLB entry. + * + * If the user has requested isolnodes for a controller, + * though, there'll be no lowmem, so we just alloc_bootmem + * the memmap. There will be no percpu memory either. + */ + if (__pfn_to_highbits(start) == 0) { + /* In low PAs, allocate via bootmem. */ + unsigned long goal = 0; + node_memmap_pfn[i] = + alloc_bootmem_pfn(memmap_size, goal); + if (kdata_huge) + goal = PFN_PHYS(lowmem_end) - node_percpu[i]; + if (node_percpu[i]) + node_percpu_pfn[i] = + alloc_bootmem_pfn(node_percpu[i], goal); + } else if (cpu_isset(i, isolnodes)) { + node_memmap_pfn[i] = alloc_bootmem_pfn(memmap_size, 0); + BUG_ON(node_percpu[i] != 0); + } else { + /* In high PAs, just reserve some pages. */ + node_memmap_pfn[i] = node_free_pfn[i]; + node_free_pfn[i] += PFN_UP(memmap_size); + if (!kdata_huge) { + node_percpu_pfn[i] = node_free_pfn[i]; + node_free_pfn[i] += PFN_UP(node_percpu[i]); + } else { + node_percpu_pfn[i] = + lowmem_end - PFN_UP(node_percpu[i]); + } + } + +#ifdef CONFIG_HIGHMEM + if (start > lowmem_end) { + zones_size[ZONE_NORMAL] = 0; + zones_size[ZONE_HIGHMEM] = end - start; + } else { + zones_size[ZONE_NORMAL] = lowmem_end - start; + zones_size[ZONE_HIGHMEM] = end - lowmem_end; + } +#else + zones_size[ZONE_NORMAL] = end - start; +#endif + + /* + * Everyone shares node 0's bootmem allocator, but + * we use alloc_remap(), above, to put the actual + * struct page array on the individual controllers, + * which is most of the data that we actually care about. + * We can't place bootmem allocators on the other + * controllers since the bootmem allocator can only + * operate on 32-bit physical addresses. + */ + NODE_DATA(i)->bdata = NODE_DATA(0)->bdata; + + free_area_init_node(i, zones_size, start, NULL); + printk(KERN_DEBUG " DMA zone: %ld per-cpu pages\n", + PFN_UP(node_percpu[i])); + + /* Track the type of memory on each node */ + if (zones_size[ZONE_NORMAL]) + node_set_state(i, N_NORMAL_MEMORY); +#ifdef CONFIG_HIGHMEM + if (end != start) + node_set_state(i, N_HIGH_MEMORY); +#endif + + node_set_online(i); + } +} + +#ifdef CONFIG_NUMA + +/* which logical CPUs are on which nodes */ +struct cpumask node_2_cpu_mask[MAX_NUMNODES] __write_once; +EXPORT_SYMBOL(node_2_cpu_mask); + +/* which node each logical CPU is on */ +char cpu_2_node[NR_CPUS] __write_once __attribute__((aligned(L2_CACHE_BYTES))); +EXPORT_SYMBOL(cpu_2_node); + +/* Return cpu_to_node() except for cpus not yet assigned, which return -1 */ +static int __init cpu_to_bound_node(int cpu, struct cpumask* unbound_cpus) +{ + if (!cpu_possible(cpu) || cpumask_test_cpu(cpu, unbound_cpus)) + return -1; + else + return cpu_to_node(cpu); +} + +/* Return number of immediately-adjacent tiles sharing the same NUMA node. */ +static int __init node_neighbors(int node, int cpu, + struct cpumask *unbound_cpus) +{ + int neighbors = 0; + int w = smp_width; + int h = smp_height; + int x = cpu % w; + int y = cpu / w; + if (x > 0 && cpu_to_bound_node(cpu-1, unbound_cpus) == node) + ++neighbors; + if (x < w-1 && cpu_to_bound_node(cpu+1, unbound_cpus) == node) + ++neighbors; + if (y > 0 && cpu_to_bound_node(cpu-w, unbound_cpus) == node) + ++neighbors; + if (y < h-1 && cpu_to_bound_node(cpu+w, unbound_cpus) == node) + ++neighbors; + return neighbors; +} + +static void __init setup_numa_mapping(void) +{ + int distance[MAX_NUMNODES][NR_CPUS]; + HV_Coord coord; + int cpu, node, cpus, i, x, y; + int num_nodes = num_online_nodes(); + struct cpumask unbound_cpus; + nodemask_t default_nodes; + + cpumask_clear(&unbound_cpus); + + /* Get set of nodes we will use for defaults */ + nodes_andnot(default_nodes, node_online_map, isolnodes); + if (nodes_empty(default_nodes)) { + BUG_ON(!node_isset(0, node_online_map)); + pr_err("Forcing NUMA node zero available as a default node\n"); + node_set(0, default_nodes); + } + + /* Populate the distance[] array */ + memset(distance, -1, sizeof(distance)); + cpu = 0; + for (coord.y = 0; coord.y < smp_height; ++coord.y) { + for (coord.x = 0; coord.x < smp_width; + ++coord.x, ++cpu) { + BUG_ON(cpu >= nr_cpu_ids); + if (!cpu_possible(cpu)) { + cpu_2_node[cpu] = -1; + continue; + } + for_each_node_mask(node, default_nodes) { + HV_MemoryControllerInfo info = + hv_inquire_memory_controller( + coord, node_controller[node]); + distance[node][cpu] = + ABS(info.coord.x) + ABS(info.coord.y); + } + cpumask_set_cpu(cpu, &unbound_cpus); + } + } + cpus = cpu; + + /* + * Round-robin through the NUMA nodes until all the cpus are + * assigned. We could be more clever here (e.g. create four + * sorted linked lists on the same set of cpu nodes, and pull + * off them in round-robin sequence, removing from all four + * lists each time) but given the relatively small numbers + * involved, O(n^2) seem OK for a one-time cost. + */ + node = first_node(default_nodes); + while (!cpumask_empty(&unbound_cpus)) { + int best_cpu = -1; + int best_distance = INT_MAX; + for (cpu = 0; cpu < cpus; ++cpu) { + if (cpumask_test_cpu(cpu, &unbound_cpus)) { + /* + * Compute metric, which is how much + * closer the cpu is to this memory + * controller than the others, shifted + * up, and then the number of + * neighbors already in the node as an + * epsilon adjustment to try to keep + * the nodes compact. + */ + int d = distance[node][cpu] * num_nodes; + for_each_node_mask(i, default_nodes) { + if (i != node) + d -= distance[i][cpu]; + } + d *= 8; /* allow space for epsilon */ + d -= node_neighbors(node, cpu, &unbound_cpus); + if (d < best_distance) { + best_cpu = cpu; + best_distance = d; + } + } + } + BUG_ON(best_cpu < 0); + cpumask_set_cpu(best_cpu, &node_2_cpu_mask[node]); + cpu_2_node[best_cpu] = node; + cpumask_clear_cpu(best_cpu, &unbound_cpus); + node = next_node(node, default_nodes); + if (node == MAX_NUMNODES) + node = first_node(default_nodes); + } + + /* Print out node assignments and set defaults for disabled cpus */ + cpu = 0; + for (y = 0; y < smp_height; ++y) { + printk(KERN_DEBUG "NUMA cpu-to-node row %d:", y); + for (x = 0; x < smp_width; ++x, ++cpu) { + if (cpu_to_node(cpu) < 0) { + pr_cont(" -"); + cpu_2_node[cpu] = first_node(default_nodes); + } else { + pr_cont(" %d", cpu_to_node(cpu)); + } + } + pr_cont("\n"); + } +} + +static struct cpu cpu_devices[NR_CPUS]; + +static int __init topology_init(void) +{ + int i; + + for_each_online_node(i) + register_one_node(i); + + for_each_present_cpu(i) + register_cpu(&cpu_devices[i], i); + + return 0; +} + +subsys_initcall(topology_init); + +#else /* !CONFIG_NUMA */ + +#define setup_numa_mapping() do { } while (0) + +#endif /* CONFIG_NUMA */ + +/** + * setup_cpu() - Do all necessary per-cpu, tile-specific initialization. + * @boot: Is this the boot cpu? + * + * Called from setup_arch() on the boot cpu, or online_secondary(). + */ +void __cpuinit setup_cpu(int boot) +{ + /* The boot cpu sets up its permanent mappings much earlier. */ + if (!boot) + store_permanent_mappings(); + + /* Allow asynchronous TLB interrupts. */ +#if CHIP_HAS_TILE_DMA() + raw_local_irq_unmask(INT_DMATLB_MISS); + raw_local_irq_unmask(INT_DMATLB_ACCESS); +#endif +#if CHIP_HAS_SN_PROC() + raw_local_irq_unmask(INT_SNITLB_MISS); +#endif + + /* + * Allow user access to many generic SPRs, like the cycle + * counter, PASS/FAIL/DONE, INTERRUPT_CRITICAL_SECTION, etc. + */ + __insn_mtspr(SPR_MPL_WORLD_ACCESS_SET_0, 1); + +#if CHIP_HAS_SN() + /* Static network is not restricted. */ + __insn_mtspr(SPR_MPL_SN_ACCESS_SET_0, 1); +#endif +#if CHIP_HAS_SN_PROC() + __insn_mtspr(SPR_MPL_SN_NOTIFY_SET_0, 1); + __insn_mtspr(SPR_MPL_SN_CPL_SET_0, 1); +#endif + + /* + * Set the MPL for interrupt control 0 to user level. + * This includes access to the SYSTEM_SAVE and EX_CONTEXT SPRs, + * as well as the PL 0 interrupt mask. + */ + __insn_mtspr(SPR_MPL_INTCTRL_0_SET_0, 1); + + /* Initialize IRQ support for this cpu. */ + setup_irq_regs(); + +#ifdef CONFIG_HARDWALL + /* Reset the network state on this cpu. */ + reset_network_state(); +#endif +} + +static int __initdata set_initramfs_file; +static char __initdata initramfs_file[128] = "initramfs.cpio.gz"; + +static int __init setup_initramfs_file(char *str) +{ + if (str == NULL) + return -EINVAL; + strncpy(initramfs_file, str, sizeof(initramfs_file) - 1); + set_initramfs_file = 1; + + return 0; +} +early_param("initramfs_file", setup_initramfs_file); + +/* + * We look for an additional "initramfs.cpio.gz" file in the hvfs. + * If there is one, we allocate some memory for it and it will be + * unpacked to the initramfs after any built-in initramfs_data. + */ +static void __init load_hv_initrd(void) +{ + HV_FS_StatInfo stat; + int fd, rc; + void *initrd; + + fd = hv_fs_findfile((HV_VirtAddr) initramfs_file); + if (fd == HV_ENOENT) { + if (set_initramfs_file) + pr_warning("No such hvfs initramfs file '%s'\n", + initramfs_file); + return; + } + BUG_ON(fd < 0); + stat = hv_fs_fstat(fd); + BUG_ON(stat.size < 0); + if (stat.flags & HV_FS_ISDIR) { + pr_warning("Ignoring hvfs file '%s': it's a directory.\n", + initramfs_file); + return; + } + initrd = alloc_bootmem_pages(stat.size); + rc = hv_fs_pread(fd, (HV_VirtAddr) initrd, stat.size, 0); + if (rc != stat.size) { + pr_err("Error reading %d bytes from hvfs file '%s': %d\n", + stat.size, initramfs_file, rc); + free_initrd_mem((unsigned long) initrd, stat.size); + return; + } + initrd_start = (unsigned long) initrd; + initrd_end = initrd_start + stat.size; +} + +void __init free_initrd_mem(unsigned long begin, unsigned long end) +{ + free_bootmem(__pa(begin), end - begin); +} + +static void __init validate_hv(void) +{ + /* + * It may already be too late, but let's check our built-in + * configuration against what the hypervisor is providing. + */ + unsigned long glue_size = hv_sysconf(HV_SYSCONF_GLUE_SIZE); + int hv_page_size = hv_sysconf(HV_SYSCONF_PAGE_SIZE_SMALL); + int hv_hpage_size = hv_sysconf(HV_SYSCONF_PAGE_SIZE_LARGE); + HV_ASIDRange asid_range; + +#ifndef CONFIG_SMP + HV_Topology topology = hv_inquire_topology(); + BUG_ON(topology.coord.x != 0 || topology.coord.y != 0); + if (topology.width != 1 || topology.height != 1) { + pr_warning("Warning: booting UP kernel on %dx%d grid;" + " will ignore all but first tile.\n", + topology.width, topology.height); + } +#endif + + if (PAGE_OFFSET + HV_GLUE_START_CPA + glue_size > (unsigned long)_text) + early_panic("Hypervisor glue size %ld is too big!\n", + glue_size); + if (hv_page_size != PAGE_SIZE) + early_panic("Hypervisor page size %#x != our %#lx\n", + hv_page_size, PAGE_SIZE); + if (hv_hpage_size != HPAGE_SIZE) + early_panic("Hypervisor huge page size %#x != our %#lx\n", + hv_hpage_size, HPAGE_SIZE); + +#ifdef CONFIG_SMP + /* + * Some hypervisor APIs take a pointer to a bitmap array + * whose size is at least the number of cpus on the chip. + * We use a struct cpumask for this, so it must be big enough. + */ + if ((smp_height * smp_width) > nr_cpu_ids) + early_panic("Hypervisor %d x %d grid too big for Linux" + " NR_CPUS %d\n", smp_height, smp_width, + nr_cpu_ids); +#endif + + /* + * Check that we're using allowed ASIDs, and initialize the + * various asid variables to their appropriate initial states. + */ + asid_range = hv_inquire_asid(0); + __get_cpu_var(current_asid) = min_asid = asid_range.start; + max_asid = asid_range.start + asid_range.size - 1; + + if (hv_confstr(HV_CONFSTR_CHIP_MODEL, (HV_VirtAddr)chip_model, + sizeof(chip_model)) < 0) { + pr_err("Warning: HV_CONFSTR_CHIP_MODEL not available\n"); + strlcpy(chip_model, "unknown", sizeof(chip_model)); + } +} + +static void __init validate_va(void) +{ +#ifndef __tilegx__ /* FIXME: GX: probably some validation relevant here */ + /* + * Similarly, make sure we're only using allowed VAs. + * We assume we can contiguously use MEM_USER_INTRPT .. MEM_HV_INTRPT, + * and 0 .. KERNEL_HIGH_VADDR. + * In addition, make sure we CAN'T use the end of memory, since + * we use the last chunk of each pgd for the pgd_list. + */ + int i, fc_fd_ok = 0; + unsigned long max_va = 0; + unsigned long list_va = + ((PGD_LIST_OFFSET / sizeof(pgd_t)) << PGDIR_SHIFT); + + for (i = 0; ; ++i) { + HV_VirtAddrRange range = hv_inquire_virtual(i); + if (range.size == 0) + break; + if (range.start <= MEM_USER_INTRPT && + range.start + range.size >= MEM_HV_INTRPT) + fc_fd_ok = 1; + if (range.start == 0) + max_va = range.size; + BUG_ON(range.start + range.size > list_va); + } + if (!fc_fd_ok) + early_panic("Hypervisor not configured for VAs 0xfc/0xfd\n"); + if (max_va == 0) + early_panic("Hypervisor not configured for low VAs\n"); + if (max_va < KERNEL_HIGH_VADDR) + early_panic("Hypervisor max VA %#lx smaller than %#lx\n", + max_va, KERNEL_HIGH_VADDR); + + /* Kernel PCs must have their high bit set; see intvec.S. */ + if ((long)VMALLOC_START >= 0) + early_panic( + "Linux VMALLOC region below the 2GB line (%#lx)!\n" + "Reconfigure the kernel with fewer NR_HUGE_VMAPS\n" + "or smaller VMALLOC_RESERVE.\n", + VMALLOC_START); +#endif +} + +/* + * cpu_lotar_map lists all the cpus that are valid for the supervisor + * to cache data on at a page level, i.e. what cpus can be placed in + * the LOTAR field of a PTE. It is equivalent to the set of possible + * cpus plus any other cpus that are willing to share their cache. + * It is set by hv_inquire_tiles(HV_INQ_TILES_LOTAR). + */ +struct cpumask __write_once cpu_lotar_map; +EXPORT_SYMBOL(cpu_lotar_map); + +#if CHIP_HAS_CBOX_HOME_MAP() +/* + * hash_for_home_map lists all the tiles that hash-for-home data + * will be cached on. Note that this may includes tiles that are not + * valid for this supervisor to use otherwise (e.g. if a hypervisor + * device is being shared between multiple supervisors). + * It is set by hv_inquire_tiles(HV_INQ_TILES_HFH_CACHE). + */ +struct cpumask hash_for_home_map; +EXPORT_SYMBOL(hash_for_home_map); +#endif + +/* + * cpu_cacheable_map lists all the cpus whose caches the hypervisor can + * flush on our behalf. It is set to cpu_possible_map OR'ed with + * hash_for_home_map, and it is what should be passed to + * hv_flush_remote() to flush all caches. Note that if there are + * dedicated hypervisor driver tiles that have authorized use of their + * cache, those tiles will only appear in cpu_lotar_map, NOT in + * cpu_cacheable_map, as they are a special case. + */ +struct cpumask __write_once cpu_cacheable_map; +EXPORT_SYMBOL(cpu_cacheable_map); + +static __initdata struct cpumask disabled_map; + +static int __init disabled_cpus(char *str) +{ + int boot_cpu = smp_processor_id(); + + if (str == NULL || cpulist_parse_crop(str, &disabled_map) != 0) + return -EINVAL; + if (cpumask_test_cpu(boot_cpu, &disabled_map)) { + pr_err("disabled_cpus: can't disable boot cpu %d\n", boot_cpu); + cpumask_clear_cpu(boot_cpu, &disabled_map); + } + return 0; +} + +early_param("disabled_cpus", disabled_cpus); + +void __init print_disabled_cpus(void) +{ + if (!cpumask_empty(&disabled_map)) { + char buf[100]; + cpulist_scnprintf(buf, sizeof(buf), &disabled_map); + pr_info("CPUs not available for Linux: %s\n", buf); + } +} + +static void __init setup_cpu_maps(void) +{ + struct cpumask hv_disabled_map, cpu_possible_init; + int boot_cpu = smp_processor_id(); + int cpus, i, rc; + + /* Learn which cpus are allowed by the hypervisor. */ + rc = hv_inquire_tiles(HV_INQ_TILES_AVAIL, + (HV_VirtAddr) cpumask_bits(&cpu_possible_init), + sizeof(cpu_cacheable_map)); + if (rc < 0) + early_panic("hv_inquire_tiles(AVAIL) failed: rc %d\n", rc); + if (!cpumask_test_cpu(boot_cpu, &cpu_possible_init)) + early_panic("Boot CPU %d disabled by hypervisor!\n", boot_cpu); + + /* Compute the cpus disabled by the hvconfig file. */ + cpumask_complement(&hv_disabled_map, &cpu_possible_init); + + /* Include them with the cpus disabled by "disabled_cpus". */ + cpumask_or(&disabled_map, &disabled_map, &hv_disabled_map); + + /* + * Disable every cpu after "setup_max_cpus". But don't mark + * as disabled the cpus that are outside of our initial rectangle, + * since that turns out to be confusing. + */ + cpus = 1; /* this cpu */ + cpumask_set_cpu(boot_cpu, &disabled_map); /* ignore this cpu */ + for (i = 0; cpus < setup_max_cpus; ++i) + if (!cpumask_test_cpu(i, &disabled_map)) + ++cpus; + for (; i < smp_height * smp_width; ++i) + cpumask_set_cpu(i, &disabled_map); + cpumask_clear_cpu(boot_cpu, &disabled_map); /* reset this cpu */ + for (i = smp_height * smp_width; i < NR_CPUS; ++i) + cpumask_clear_cpu(i, &disabled_map); + + /* + * Setup cpu_possible map as every cpu allocated to us, minus + * the results of any "disabled_cpus" settings. + */ + cpumask_andnot(&cpu_possible_init, &cpu_possible_init, &disabled_map); + init_cpu_possible(&cpu_possible_init); + + /* Learn which cpus are valid for LOTAR caching. */ + rc = hv_inquire_tiles(HV_INQ_TILES_LOTAR, + (HV_VirtAddr) cpumask_bits(&cpu_lotar_map), + sizeof(cpu_lotar_map)); + if (rc < 0) { + pr_err("warning: no HV_INQ_TILES_LOTAR; using AVAIL\n"); + cpu_lotar_map = cpu_possible_map; + } + +#if CHIP_HAS_CBOX_HOME_MAP() + /* Retrieve set of CPUs used for hash-for-home caching */ + rc = hv_inquire_tiles(HV_INQ_TILES_HFH_CACHE, + (HV_VirtAddr) hash_for_home_map.bits, + sizeof(hash_for_home_map)); + if (rc < 0) + early_panic("hv_inquire_tiles(HFH_CACHE) failed: rc %d\n", rc); + cpumask_or(&cpu_cacheable_map, &cpu_possible_map, &hash_for_home_map); +#else + cpu_cacheable_map = cpu_possible_map; +#endif +} + + +static int __init dataplane(char *str) +{ + pr_warning("WARNING: dataplane support disabled in this kernel\n"); + return 0; +} + +early_param("dataplane", dataplane); + +#ifdef CONFIG_CMDLINE_BOOL +static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE; +#endif + +void __init setup_arch(char **cmdline_p) +{ + int len; + +#if defined(CONFIG_CMDLINE_BOOL) && defined(CONFIG_CMDLINE_OVERRIDE) + len = hv_get_command_line((HV_VirtAddr) boot_command_line, + COMMAND_LINE_SIZE); + if (boot_command_line[0]) + pr_warning("WARNING: ignoring dynamic command line \"%s\"\n", + boot_command_line); + strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); +#else + char *hv_cmdline; +#if defined(CONFIG_CMDLINE_BOOL) + if (builtin_cmdline[0]) { + int builtin_len = strlcpy(boot_command_line, builtin_cmdline, + COMMAND_LINE_SIZE); + if (builtin_len < COMMAND_LINE_SIZE-1) + boot_command_line[builtin_len++] = ' '; + hv_cmdline = &boot_command_line[builtin_len]; + len = COMMAND_LINE_SIZE - builtin_len; + } else +#endif + { + hv_cmdline = boot_command_line; + len = COMMAND_LINE_SIZE; + } + len = hv_get_command_line((HV_VirtAddr) hv_cmdline, len); + if (len < 0 || len > COMMAND_LINE_SIZE) + early_panic("hv_get_command_line failed: %d\n", len); +#endif + + *cmdline_p = boot_command_line; + + /* Set disabled_map and setup_max_cpus very early */ + parse_early_param(); + + /* Make sure the kernel is compatible with the hypervisor. */ + validate_hv(); + validate_va(); + + setup_cpu_maps(); + + +#ifdef CONFIG_PCI + /* + * Initialize the PCI structures. This is done before memory + * setup so that we know whether or not a pci_reserve region + * is necessary. + */ + if (tile_pci_init() == 0) + pci_reserve_mb = 0; + + /* PCI systems reserve a region just below 4GB for mapping iomem. */ + pci_reserve_end_pfn = (1 << (32 - PAGE_SHIFT)); + pci_reserve_start_pfn = pci_reserve_end_pfn - + (pci_reserve_mb << (20 - PAGE_SHIFT)); +#endif + + init_mm.start_code = (unsigned long) _text; + init_mm.end_code = (unsigned long) _etext; + init_mm.end_data = (unsigned long) _edata; + init_mm.brk = (unsigned long) _end; + + setup_memory(); + store_permanent_mappings(); + setup_bootmem_allocator(); + + /* + * NOTE: before this point _nobody_ is allowed to allocate + * any memory using the bootmem allocator. + */ + + paging_init(); + setup_numa_mapping(); + zone_sizes_init(); + set_page_homes(); + setup_cpu(1); + setup_clock(); + load_hv_initrd(); +} + + +/* + * Set up per-cpu memory. + */ + +unsigned long __per_cpu_offset[NR_CPUS] __write_once; +EXPORT_SYMBOL(__per_cpu_offset); + +static size_t __initdata pfn_offset[MAX_NUMNODES] = { 0 }; +static unsigned long __initdata percpu_pfn[NR_CPUS] = { 0 }; + +/* + * As the percpu code allocates pages, we return the pages from the + * end of the node for the specified cpu. + */ +static void *__init pcpu_fc_alloc(unsigned int cpu, size_t size, size_t align) +{ + int nid = cpu_to_node(cpu); + unsigned long pfn = node_percpu_pfn[nid] + pfn_offset[nid]; + + BUG_ON(size % PAGE_SIZE != 0); + pfn_offset[nid] += size / PAGE_SIZE; + if (percpu_pfn[cpu] == 0) + percpu_pfn[cpu] = pfn; + return pfn_to_kaddr(pfn); +} + +/* + * Pages reserved for percpu memory are not freeable, and in any case we are + * on a short path to panic() in setup_per_cpu_area() at this point anyway. + */ +static void __init pcpu_fc_free(void *ptr, size_t size) +{ +} + +/* + * Set up vmalloc page tables using bootmem for the percpu code. + */ +static void __init pcpu_fc_populate_pte(unsigned long addr) +{ + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + pte_t *pte; + + BUG_ON(pgd_addr_invalid(addr)); + + pgd = swapper_pg_dir + pgd_index(addr); + pud = pud_offset(pgd, addr); + BUG_ON(!pud_present(*pud)); + pmd = pmd_offset(pud, addr); + if (pmd_present(*pmd)) { + BUG_ON(pmd_huge_page(*pmd)); + } else { + pte = __alloc_bootmem(L2_KERNEL_PGTABLE_SIZE, + HV_PAGE_TABLE_ALIGN, 0); + pmd_populate_kernel(&init_mm, pmd, pte); + } +} + +void __init setup_per_cpu_areas(void) +{ + struct page *pg; + unsigned long delta, pfn, lowmem_va; + unsigned long size = percpu_size(); + char *ptr; + int rc, cpu, i; + + rc = pcpu_page_first_chunk(PERCPU_MODULE_RESERVE, pcpu_fc_alloc, + pcpu_fc_free, pcpu_fc_populate_pte); + if (rc < 0) + panic("Cannot initialize percpu area (err=%d)", rc); + + delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start; + for_each_possible_cpu(cpu) { + __per_cpu_offset[cpu] = delta + pcpu_unit_offsets[cpu]; + + /* finv the copy out of cache so we can change homecache */ + ptr = pcpu_base_addr + pcpu_unit_offsets[cpu]; + __finv_buffer(ptr, size); + pfn = percpu_pfn[cpu]; + + /* Rewrite the page tables to cache on that cpu */ + pg = pfn_to_page(pfn); + for (i = 0; i < size; i += PAGE_SIZE, ++pfn, ++pg) { + + /* Update the vmalloc mapping and page home. */ + pte_t *ptep = + virt_to_pte(NULL, (unsigned long)ptr + i); + pte_t pte = *ptep; + BUG_ON(pfn != pte_pfn(pte)); + pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_TILE_L3); + pte = set_remote_cache_cpu(pte, cpu); + set_pte(ptep, pte); + + /* Update the lowmem mapping for consistency. */ + lowmem_va = (unsigned long)pfn_to_kaddr(pfn); + ptep = virt_to_pte(NULL, lowmem_va); + if (pte_huge(*ptep)) { + printk(KERN_DEBUG "early shatter of huge page" + " at %#lx\n", lowmem_va); + shatter_pmd((pmd_t *)ptep); + ptep = virt_to_pte(NULL, lowmem_va); + BUG_ON(pte_huge(*ptep)); + } + BUG_ON(pfn != pte_pfn(*ptep)); + set_pte(ptep, pte); + } + } + + /* Set our thread pointer appropriately. */ + set_my_cpu_offset(__per_cpu_offset[smp_processor_id()]); + + /* Make sure the finv's have completed. */ + mb_incoherent(); + + /* Flush the TLB so we reference it properly from here on out. */ + local_flush_tlb_all(); +} + +static struct resource data_resource = { + .name = "Kernel data", + .start = 0, + .end = 0, + .flags = IORESOURCE_BUSY | IORESOURCE_MEM +}; + +static struct resource code_resource = { + .name = "Kernel code", + .start = 0, + .end = 0, + .flags = IORESOURCE_BUSY | IORESOURCE_MEM +}; + +/* + * We reserve all resources above 4GB so that PCI won't try to put + * mappings above 4GB; the standard allows that for some devices but + * the probing code trunates values to 32 bits. + */ +#ifdef CONFIG_PCI +static struct resource* __init +insert_non_bus_resource(void) +{ + struct resource *res = + kzalloc(sizeof(struct resource), GFP_ATOMIC); + res->name = "Non-Bus Physical Address Space"; + res->start = (1ULL << 32); + res->end = -1LL; + res->flags = IORESOURCE_BUSY | IORESOURCE_MEM; + if (insert_resource(&iomem_resource, res)) { + kfree(res); + return NULL; + } + return res; +} +#endif + +static struct resource* __init +insert_ram_resource(u64 start_pfn, u64 end_pfn) +{ + struct resource *res = + kzalloc(sizeof(struct resource), GFP_ATOMIC); + res->name = "System RAM"; + res->start = start_pfn << PAGE_SHIFT; + res->end = (end_pfn << PAGE_SHIFT) - 1; + res->flags = IORESOURCE_BUSY | IORESOURCE_MEM; + if (insert_resource(&iomem_resource, res)) { + kfree(res); + return NULL; + } + return res; +} + +/* + * Request address space for all standard resources + * + * If the system includes PCI root complex drivers, we need to create + * a window just below 4GB where PCI BARs can be mapped. + */ +static int __init request_standard_resources(void) +{ + int i; + enum { CODE_DELTA = MEM_SV_INTRPT - PAGE_OFFSET }; + + iomem_resource.end = -1LL; +#ifdef CONFIG_PCI + insert_non_bus_resource(); +#endif + + for_each_online_node(i) { + u64 start_pfn = node_start_pfn[i]; + u64 end_pfn = node_end_pfn[i]; + +#ifdef CONFIG_PCI + if (start_pfn <= pci_reserve_start_pfn && + end_pfn > pci_reserve_start_pfn) { + if (end_pfn > pci_reserve_end_pfn) + insert_ram_resource(pci_reserve_end_pfn, + end_pfn); + end_pfn = pci_reserve_start_pfn; + } +#endif + insert_ram_resource(start_pfn, end_pfn); + } + + code_resource.start = __pa(_text - CODE_DELTA); + code_resource.end = __pa(_etext - CODE_DELTA)-1; + data_resource.start = __pa(_sdata); + data_resource.end = __pa(_end)-1; + + insert_resource(&iomem_resource, &code_resource); + insert_resource(&iomem_resource, &data_resource); + +#ifdef CONFIG_KEXEC + insert_resource(&iomem_resource, &crashk_res); +#endif + + return 0; +} + +subsys_initcall(request_standard_resources); |