diff options
Diffstat (limited to 'arch/x86/Kconfig')
| -rw-r--r-- | arch/x86/Kconfig | 112 |
1 files changed, 82 insertions, 30 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index df9e885eee14..356d2ec8e2fb 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -47,6 +47,11 @@ config X86 select HAVE_KERNEL_BZIP2 select HAVE_KERNEL_LZMA +config OUTPUT_FORMAT + string + default "elf32-i386" if X86_32 + default "elf64-x86-64" if X86_64 + config ARCH_DEFCONFIG string default "arch/x86/configs/i386_defconfig" if X86_32 @@ -274,15 +279,9 @@ config SPARSE_IRQ If you don't know what to do here, say N. -config NUMA_MIGRATE_IRQ_DESC - bool "Move irq desc when changing irq smp_affinity" +config NUMA_IRQ_DESC + def_bool y depends on SPARSE_IRQ && NUMA - depends on BROKEN - default n - ---help--- - This enables moving irq_desc to cpu/node that irq will use handled. - - If you don't know what to do here, say N. config X86_MPPARSE bool "Enable MPS table" if ACPI @@ -355,7 +354,7 @@ config X86_UV depends on X86_64 depends on X86_EXTENDED_PLATFORM depends on NUMA - select X86_X2APIC + depends on X86_X2APIC ---help--- This option is needed in order to support SGI Ultraviolet systems. If you don't have one of these, you should say N here. @@ -498,6 +497,19 @@ config PARAVIRT over full virtualization. However, when run without a hypervisor the kernel is theoretically slower and slightly larger. +config PARAVIRT_SPINLOCKS + bool "Paravirtualization layer for spinlocks" + depends on PARAVIRT && SMP && EXPERIMENTAL + ---help--- + Paravirtualized spinlocks allow a pvops backend to replace the + spinlock implementation with something virtualization-friendly + (for example, block the virtual CPU rather than spinning). + + Unfortunately the downside is an up to 5% performance hit on + native kernels, with various workloads. + + If you are unsure how to answer this question, answer N. + config PARAVIRT_CLOCK bool default n @@ -727,6 +739,7 @@ config X86_UP_IOAPIC config X86_LOCAL_APIC def_bool y depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC + select HAVE_PERF_COUNTERS if (!M386 && !M486) config X86_IO_APIC def_bool y @@ -776,10 +789,26 @@ config X86_MCE to disable it. MCE support simply ignores non-MCE processors like the 386 and 486, so nearly everyone can say Y here. +config X86_OLD_MCE + depends on X86_32 && X86_MCE + bool "Use legacy machine check code (will go away)" + default n + select X86_ANCIENT_MCE + ---help--- + Use the old i386 machine check code. This is merely intended for + testing in a transition period. Try this if you run into any machine + check related software problems, but report the problem to + linux-kernel. When in doubt say no. + +config X86_NEW_MCE + depends on X86_MCE + bool + default y if (!X86_OLD_MCE && X86_32) || X86_64 + config X86_MCE_INTEL def_bool y prompt "Intel MCE features" - depends on X86_64 && X86_MCE && X86_LOCAL_APIC + depends on X86_NEW_MCE && X86_LOCAL_APIC ---help--- Additional support for intel specific MCE features such as the thermal monitor. @@ -787,19 +816,36 @@ config X86_MCE_INTEL config X86_MCE_AMD def_bool y prompt "AMD MCE features" - depends on X86_64 && X86_MCE && X86_LOCAL_APIC + depends on X86_NEW_MCE && X86_LOCAL_APIC ---help--- Additional support for AMD specific MCE features such as the DRAM Error Threshold. +config X86_ANCIENT_MCE + def_bool n + depends on X86_32 + prompt "Support for old Pentium 5 / WinChip machine checks" + ---help--- + Include support for machine check handling on old Pentium 5 or WinChip + systems. These typically need to be enabled explicitely on the command + line. + config X86_MCE_THRESHOLD depends on X86_MCE_AMD || X86_MCE_INTEL bool default y +config X86_MCE_INJECT + depends on X86_NEW_MCE + tristate "Machine check injector support" + ---help--- + Provide support for injecting machine checks for testing purposes. + If you don't know what a machine check is and you don't do kernel + QA it is safe to say n. + config X86_MCE_NONFATAL tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4" - depends on X86_32 && X86_MCE + depends on X86_OLD_MCE ---help--- Enabling this feature starts a timer that triggers every 5 seconds which will look at the machine check registers to see if anything happened. @@ -812,11 +858,15 @@ config X86_MCE_NONFATAL config X86_MCE_P4THERMAL bool "check for P4 thermal throttling interrupt." - depends on X86_32 && X86_MCE && (X86_UP_APIC || SMP) + depends on X86_OLD_MCE && X86_MCE && (X86_UP_APIC || SMP) ---help--- Enabling this feature will cause a message to be printed when the P4 enters thermal throttling. +config X86_THERMAL_VECTOR + def_bool y + depends on X86_MCE_P4THERMAL || X86_MCE_INTEL + config VM86 bool "Enable VM86 support" if EMBEDDED default y @@ -1453,9 +1503,7 @@ config KEXEC_JUMP config PHYSICAL_START hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP) - default "0x1000000" if X86_NUMAQ - default "0x200000" if X86_64 - default "0x100000" + default "0x1000000" ---help--- This gives the physical address where the kernel is loaded. @@ -1474,15 +1522,15 @@ config PHYSICAL_START to be specifically compiled to run from a specific memory area (normally a reserved region) and this option comes handy. - So if you are using bzImage for capturing the crash dump, leave - the value here unchanged to 0x100000 and set CONFIG_RELOCATABLE=y. - Otherwise if you plan to use vmlinux for capturing the crash dump - change this value to start of the reserved region (Typically 16MB - 0x1000000). In other words, it can be set based on the "X" value as - specified in the "crashkernel=YM@XM" command line boot parameter - passed to the panic-ed kernel. Typically this parameter is set as - crashkernel=64M@16M. Please take a look at - Documentation/kdump/kdump.txt for more details about crash dumps. + So if you are using bzImage for capturing the crash dump, + leave the value here unchanged to 0x1000000 and set + CONFIG_RELOCATABLE=y. Otherwise if you plan to use vmlinux + for capturing the crash dump change this value to start of + the reserved region. In other words, it can be set based on + the "X" value as specified in the "crashkernel=YM@XM" + command line boot parameter passed to the panic-ed + kernel. Please take a look at Documentation/kdump/kdump.txt + for more details about crash dumps. Usage of bzImage for capturing the crash dump is recommended as one does not have to build two kernels. Same kernel can be used @@ -1495,8 +1543,8 @@ config PHYSICAL_START Don't change this unless you know what you are doing. config RELOCATABLE - bool "Build a relocatable kernel (EXPERIMENTAL)" - depends on EXPERIMENTAL + bool "Build a relocatable kernel" + default y ---help--- This builds a kernel image that retains relocation information so it can be loaded someplace besides the default 1MB. @@ -1511,12 +1559,16 @@ config RELOCATABLE it has been loaded at and the compile time physical address (CONFIG_PHYSICAL_START) is ignored. +# Relocation on x86-32 needs some additional build support +config X86_NEED_RELOCS + def_bool y + depends on X86_32 && RELOCATABLE + config PHYSICAL_ALIGN hex prompt "Alignment value to which kernel should be aligned" if X86_32 - default "0x100000" if X86_32 - default "0x200000" if X86_64 - range 0x2000 0x400000 + default "0x1000000" + range 0x2000 0x1000000 ---help--- This value puts the alignment restrictions on physical address where kernel is loaded and run from. Kernel is compiled for an |