diff options
Diffstat (limited to 'arch/x86/Kconfig')
| -rw-r--r-- | arch/x86/Kconfig | 136 |
1 files changed, 82 insertions, 54 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index f85fe3459cb6..0af5250d914f 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -23,9 +23,11 @@ config X86 def_bool y select ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS select ARCH_MIGHT_HAVE_PC_PARPORT + select ARCH_MIGHT_HAVE_PC_SERIO select HAVE_AOUT if X86_32 select HAVE_UNSTABLE_SCHED_CLOCK select ARCH_SUPPORTS_NUMA_BALANCING + select ARCH_SUPPORTS_INT128 if X86_64 select ARCH_WANTS_PROT_NUMA_PROT_NONE select HAVE_IDE select HAVE_OPROFILE @@ -124,6 +126,7 @@ config X86 select RTC_LIB select HAVE_DEBUG_STACKOVERFLOW select HAVE_IRQ_EXIT_ON_IRQ_STACK if X86_64 + select HAVE_CC_STACKPROTECTOR config INSTRUCTION_DECODER def_bool y @@ -277,13 +280,13 @@ config SMP bool "Symmetric multi-processing support" ---help--- This enables support for systems with more than one CPU. If you have - a system with only one CPU, like most personal computers, say N. If - you have a system with more than one CPU, say Y. + a system with only one CPU, say N. If you have a system with more + than one CPU, say Y. - If you say N here, the kernel will run on single and multiprocessor + If you say N here, the kernel will run on uni- and multiprocessor machines, but will use only one CPU of a multiprocessor machine. If you say Y here, the kernel will run on many, but not all, - singleprocessor machines. On a singleprocessor machine, the kernel + uniprocessor machines. On a uniprocessor machine, the kernel will run faster if you say N here. Note that if you say Y here and choose architecture "586" or @@ -437,42 +440,27 @@ config X86_INTEL_CE This option compiles in support for the CE4100 SOC for settop boxes and media devices. -config X86_WANT_INTEL_MID +config X86_INTEL_MID bool "Intel MID platform support" depends on X86_32 depends on X86_EXTENDED_PLATFORM - ---help--- - Select to build a kernel capable of supporting Intel MID platform - systems which do not have the PCI legacy interfaces (Moorestown, - Medfield). If you are building for a PC class system say N here. - -if X86_WANT_INTEL_MID - -config X86_INTEL_MID - bool - -config X86_MDFLD - bool "Medfield MID platform" + depends on X86_PLATFORM_DEVICES depends on PCI depends on PCI_GOANY depends on X86_IO_APIC - select X86_INTEL_MID select SFI + select I2C select DW_APB_TIMER select APB_TIMER - select I2C - select SPI select INTEL_SCU_IPC - select X86_PLATFORM_DEVICES select MFD_INTEL_MSIC ---help--- - Medfield is Intel's Low Power Intel Architecture (LPIA) based Moblin - Internet Device(MID) platform. - Unlike standard x86 PCs, Medfield does not have many legacy devices - nor standard legacy replacement devices/features. e.g. Medfield does - not contain i8259, i8254, HPET, legacy BIOS, most of the io ports. + Select to build a kernel capable of supporting Intel MID (Mobile + Internet Device) platform systems which do not have the PCI legacy + interfaces. If you are building for a PC class system say N here. -endif + Intel MID platforms are based on an Intel processor and chipset which + consume less power than most of the x86 derivatives. config X86_INTEL_LPSS bool "Intel Low Power Subsystem Support" @@ -745,6 +733,7 @@ config APB_TIMER # The code disables itself when not needed. config DMI default y + select DMI_SCAN_MACHINE_NON_EFI_FALLBACK bool "Enable DMI scanning" if EXPERT ---help--- Enabled scanning of DMI to identify machine quirks. Say Y @@ -1063,9 +1052,9 @@ config MICROCODE_INTEL This options enables microcode patch loading support for Intel processors. - For latest news and information on obtaining all the required - Intel ingredients for this driver, check: - <http://www.urbanmyth.org/microcode/>. + For the current Intel microcode data package go to + <https://downloadcenter.intel.com> and search for + 'Linux Processor Microcode Data File'. config MICROCODE_AMD bool "AMD microcode loading support" @@ -1079,10 +1068,6 @@ config MICROCODE_OLD_INTERFACE def_bool y depends on MICROCODE -config MICROCODE_INTEL_LIB - def_bool y - depends on MICROCODE_INTEL - config MICROCODE_INTEL_EARLY def_bool n @@ -1616,22 +1601,6 @@ config SECCOMP If unsure, say Y. Only embedded should say N here. -config CC_STACKPROTECTOR - bool "Enable -fstack-protector buffer overflow detection" - ---help--- - This option turns on the -fstack-protector GCC feature. This - feature puts, at the beginning of functions, a canary value on - the stack just before the return address, and validates - the value just before actually returning. Stack based buffer - overflows (that need to overwrite this return address) now also - overwrite the canary, which gets detected and the attack is then - neutralized via a kernel panic. - - This feature requires gcc version 4.2 or above, or a distribution - gcc with the feature backported. Older versions are automatically - detected and for those versions, this configuration option is - ignored. (and a warning is printed during bootup) - source kernel/Kconfig.hz config KEXEC @@ -1727,16 +1696,67 @@ config RELOCATABLE Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address it has been loaded at and the compile time physical address - (CONFIG_PHYSICAL_START) is ignored. + (CONFIG_PHYSICAL_START) is used as the minimum location. -# Relocation on x86-32 needs some additional build support +config RANDOMIZE_BASE + bool "Randomize the address of the kernel image" + depends on RELOCATABLE + depends on !HIBERNATION + default n + ---help--- + Randomizes the physical and virtual address at which the + kernel image is decompressed, as a security feature that + deters exploit attempts relying on knowledge of the location + of kernel internals. + + Entropy is generated using the RDRAND instruction if it is + supported. If RDTSC is supported, it is used as well. If + neither RDRAND nor RDTSC are supported, then randomness is + read from the i8254 timer. + + The kernel will be offset by up to RANDOMIZE_BASE_MAX_OFFSET, + and aligned according to PHYSICAL_ALIGN. Since the kernel is + built using 2GiB addressing, and PHYSICAL_ALGIN must be at a + minimum of 2MiB, only 10 bits of entropy is theoretically + possible. At best, due to page table layouts, 64-bit can use + 9 bits of entropy and 32-bit uses 8 bits. + + If unsure, say N. + +config RANDOMIZE_BASE_MAX_OFFSET + hex "Maximum kASLR offset allowed" if EXPERT + depends on RANDOMIZE_BASE + range 0x0 0x20000000 if X86_32 + default "0x20000000" if X86_32 + range 0x0 0x40000000 if X86_64 + default "0x40000000" if X86_64 + ---help--- + The lesser of RANDOMIZE_BASE_MAX_OFFSET and available physical + memory is used to determine the maximal offset in bytes that will + be applied to the kernel when kernel Address Space Layout + Randomization (kASLR) is active. This must be a multiple of + PHYSICAL_ALIGN. + + On 32-bit this is limited to 512MiB by page table layouts. The + default is 512MiB. + + On 64-bit this is limited by how the kernel fixmap page table is + positioned, so this cannot be larger than 1GiB currently. Without + RANDOMIZE_BASE, there is a 512MiB to 1.5GiB split between kernel + and modules. When RANDOMIZE_BASE_MAX_OFFSET is above 512MiB, the + modules area will shrink to compensate, up to the current maximum + 1GiB to 1GiB split. The default is 1GiB. + + If unsure, leave at the default value. + +# Relocation on x86 needs some additional build support config X86_NEED_RELOCS def_bool y - depends on X86_32 && RELOCATABLE + depends on RANDOMIZE_BASE || (X86_32 && RELOCATABLE) config PHYSICAL_ALIGN hex "Alignment value to which kernel should be aligned" - default "0x1000000" + default "0x200000" range 0x2000 0x1000000 if X86_32 range 0x200000 0x1000000 if X86_64 ---help--- @@ -2392,6 +2412,14 @@ config X86_DMA_REMAP bool depends on STA2X11 +config IOSF_MBI + bool + depends on PCI + ---help--- + To be selected by modules requiring access to the Intel OnChip System + Fabric (IOSF) Sideband MailBox Interface (MBI). For MBI platforms + enumerable by PCI. + source "net/Kconfig" source "drivers/Kconfig" |