diff options
Diffstat (limited to 'arch/x86/Kconfig')
| -rw-r--r-- | arch/x86/Kconfig | 132 |
1 files changed, 47 insertions, 85 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 0af5250d914f..25d2c6f7325e 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -43,6 +43,7 @@ config X86 select HAVE_DMA_ATTRS select HAVE_DMA_CONTIGUOUS if !SWIOTLB select HAVE_KRETPROBES + select GENERIC_EARLY_IOREMAP select HAVE_OPTPROBES select HAVE_KPROBES_ON_FTRACE select HAVE_FTRACE_MCOUNT_RECORD @@ -107,9 +108,9 @@ config X86 select HAVE_ARCH_SOFT_DIRTY select CLOCKSOURCE_WATCHDOG select GENERIC_CLOCKEVENTS - select ARCH_CLOCKSOURCE_DATA if X86_64 + select ARCH_CLOCKSOURCE_DATA select GENERIC_CLOCKEVENTS_BROADCAST if X86_64 || (X86_32 && X86_LOCAL_APIC) - select GENERIC_TIME_VSYSCALL if X86_64 + select GENERIC_TIME_VSYSCALL select KTIME_SCALAR if X86_32 select GENERIC_STRNCPY_FROM_USER select GENERIC_STRNLEN_USER @@ -127,6 +128,8 @@ config X86 select HAVE_DEBUG_STACKOVERFLOW select HAVE_IRQ_EXIT_ON_IRQ_STACK if X86_64 select HAVE_CC_STACKPROTECTOR + select GENERIC_CPU_AUTOPROBE + select HAVE_ARCH_AUDITSYSCALL config INSTRUCTION_DECODER def_bool y @@ -195,9 +198,6 @@ config ARCH_HAS_CPU_RELAX config ARCH_HAS_CACHE_LINE_SIZE def_bool y -config ARCH_HAS_CPU_AUTOPROBE - def_bool y - config HAVE_SETUP_PER_CPU_AREA def_bool y @@ -346,12 +346,9 @@ config X86_EXTENDED_PLATFORM for the following (non-PC) 32 bit x86 platforms: Goldfish (Android emulator) AMD Elan - NUMAQ (IBM/Sequent) RDC R-321x SoC SGI 320/540 (Visual Workstation) STA2X11-based (e.g. Northville) - Summit/EXA (IBM x440) - Unisys ES7000 IA32 series Moorestown MID devices If you have one of these systems, or if you want to build a @@ -489,49 +486,22 @@ config X86_32_NON_STANDARD depends on X86_32 && SMP depends on X86_EXTENDED_PLATFORM ---help--- - This option compiles in the NUMAQ, Summit, bigsmp, ES7000, - STA2X11, default subarchitectures. It is intended for a generic - binary kernel. If you select them all, kernel will probe it - one by one and will fallback to default. + This option compiles in the bigsmp and STA2X11 default + subarchitectures. It is intended for a generic binary + kernel. If you select them all, kernel will probe it one by + one and will fallback to default. # Alphabetically sorted list of Non standard 32 bit platforms -config X86_NUMAQ - bool "NUMAQ (IBM/Sequent)" - depends on X86_32_NON_STANDARD - depends on PCI - select NUMA - select X86_MPPARSE - ---help--- - This option is used for getting Linux to run on a NUMAQ (IBM/Sequent) - NUMA multiquad box. This changes the way that processors are - bootstrapped, and uses Clustered Logical APIC addressing mode instead - of Flat Logical. You will need a new lynxer.elf file to flash your - firmware with - send email to <Martin.Bligh@us.ibm.com>. - config X86_SUPPORTS_MEMORY_FAILURE def_bool y # MCE code calls memory_failure(): depends on X86_MCE # On 32-bit this adds too big of NODES_SHIFT and we run out of page flags: - depends on !X86_NUMAQ # On 32-bit SPARSEMEM adds too big of SECTIONS_WIDTH: depends on X86_64 || !SPARSEMEM select ARCH_SUPPORTS_MEMORY_FAILURE -config X86_VISWS - bool "SGI 320/540 (Visual Workstation)" - depends on X86_32 && PCI && X86_MPPARSE && PCI_GODIRECT - depends on X86_32_NON_STANDARD - ---help--- - The SGI Visual Workstation series is an IA32-based workstation - based on SGI systems chips with some legacy PC hardware attached. - - Say Y here to create a kernel to run on the SGI 320 or 540. - - A kernel compiled for the Visual Workstation will run on general - PCs as well. See <file:Documentation/sgi-visws.txt> for details. - config STA2X11 bool "STA2X11 Companion Chip Support" depends on X86_32_NON_STANDARD && PCI @@ -548,20 +518,6 @@ config STA2X11 option is selected the kernel will still be able to boot on standard PC machines. -config X86_SUMMIT - bool "Summit/EXA (IBM x440)" - depends on X86_32_NON_STANDARD - ---help--- - This option is needed for IBM systems that use the Summit/EXA chipset. - In particular, it is needed for the x440. - -config X86_ES7000 - bool "Unisys ES7000 IA32 series" - depends on X86_32_NON_STANDARD && X86_BIGSMP - ---help--- - Support for Unisys ES7000 systems. Say 'Y' here if this kernel is - supposed to run on an IA32-based Unisys ES7000 system. - config X86_32_IRIS tristate "Eurobraille/Iris poweroff module" depends on X86_32 @@ -684,14 +640,6 @@ config MEMTEST memtest=4, mean do 4 test patterns. If you are unsure how to answer this question, answer N. -config X86_SUMMIT_NUMA - def_bool y - depends on X86_32 && NUMA && X86_32_NON_STANDARD - -config X86_CYCLONE_TIMER - def_bool y - depends on X86_SUMMIT - source "arch/x86/Kconfig.cpu" config HPET_TIMER @@ -820,7 +768,7 @@ config NR_CPUS range 2 8192 if SMP && !MAXSMP && CPUMASK_OFFSTACK && X86_64 default "1" if !SMP default "8192" if MAXSMP - default "32" if SMP && (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000) + default "32" if SMP && X86_BIGSMP default "8" if SMP ---help--- This allows you to specify the maximum number of CPUs which this @@ -884,10 +832,6 @@ config X86_IO_APIC def_bool y depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_IOAPIC || PCI_MSI -config X86_VISWS_APIC - def_bool y - depends on X86_32 && X86_VISWS - config X86_REROUTE_FOR_BROKEN_BOOT_IRQS bool "Reroute for broken boot IRQs" depends on X86_IO_APIC @@ -1105,13 +1049,11 @@ config X86_CPUID choice prompt "High Memory Support" - default HIGHMEM64G if X86_NUMAQ default HIGHMEM4G depends on X86_32 config NOHIGHMEM bool "off" - depends on !X86_NUMAQ ---help--- Linux can use up to 64 Gigabytes of physical memory on x86 systems. However, the address space of 32-bit x86 processors is only 4 @@ -1148,7 +1090,6 @@ config NOHIGHMEM config HIGHMEM4G bool "4GB" - depends on !X86_NUMAQ ---help--- Select this if you have a 32-bit processor and between 1 and 4 gigabytes of physical RAM. @@ -1240,8 +1181,8 @@ config DIRECT_GBPAGES config NUMA bool "Numa Memory Allocation and Scheduler Support" depends on SMP - depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI)) - default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP) + depends on X86_64 || (X86_32 && HIGHMEM64G && X86_BIGSMP) + default y if X86_BIGSMP ---help--- Enable NUMA (Non Uniform Memory Access) support. @@ -1252,15 +1193,11 @@ config NUMA For 64-bit this is recommended if the system is Intel Core i7 (or later), AMD Opteron, or EM64T NUMA. - For 32-bit this is only needed on (rare) 32-bit-only platforms - that support NUMA topologies, such as NUMAQ / Summit, or if you - boot a 32-bit kernel on a 64-bit NUMA platform. + For 32-bit this is only needed if you boot a 32-bit + kernel on a 64-bit NUMA platform. Otherwise, you should say N. -comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI" - depends on X86_32 && X86_SUMMIT && (!HIGHMEM64G || !ACPI) - config AMD_NUMA def_bool y prompt "Old style AMD Opteron NUMA detection" @@ -1302,7 +1239,6 @@ config NODES_SHIFT range 1 10 default "10" if MAXSMP default "6" if X86_64 - default "4" if X86_NUMAQ default "3" depends on NEED_MULTIPLE_NODES ---help--- @@ -1585,6 +1521,20 @@ config EFI_STUB See Documentation/efi-stub.txt for more information. +config EFI_MIXED + bool "EFI mixed-mode support" + depends on EFI_STUB && X86_64 + ---help--- + Enabling this feature allows a 64-bit kernel to be booted + on a 32-bit firmware, provided that your CPU supports 64-bit + mode. + + Note that it is not possible to boot a mixed-mode enabled + kernel via the EFI boot stub - a bootloader that supports + the EFI handover protocol must be used. + + If unsure, say N. + config SECCOMP def_bool y prompt "Enable seccomp to safely compute untrusted bytecode" @@ -1836,17 +1786,29 @@ config DEBUG_HOTPLUG_CPU0 If unsure, say N. config COMPAT_VDSO - def_bool y - prompt "Compat VDSO support" + def_bool n + prompt "Disable the 32-bit vDSO (needed for glibc 2.3.3)" depends on X86_32 || IA32_EMULATION ---help--- - Map the 32-bit VDSO to the predictable old-style address too. + Certain buggy versions of glibc will crash if they are + presented with a 32-bit vDSO that is not mapped at the address + indicated in its segment table. - Say N here if you are running a sufficiently recent glibc - version (2.3.3 or later), to remove the high-mapped - VDSO mapping and to exclusively use the randomized VDSO. + The bug was introduced by f866314b89d56845f55e6f365e18b31ec978ec3a + and fixed by 3b3ddb4f7db98ec9e912ccdf54d35df4aa30e04a and + 49ad572a70b8aeb91e57483a11dd1b77e31c4468. Glibc 2.3.3 is + the only released version with the bug, but OpenSUSE 9 + contains a buggy "glibc 2.3.2". - If unsure, say Y. + The symptom of the bug is that everything crashes on startup, saying: + dl_main: Assertion `(void *) ph->p_vaddr == _rtld_local._dl_sysinfo_dso' failed! + + Saying Y here changes the default value of the vdso32 boot + option from 1 to 0, which turns off the 32-bit vDSO entirely. + This works around the glibc bug but hurts performance. + + If unsure, say N: if you are compiling your own kernel, you + are unlikely to be using a buggy version of glibc. config CMDLINE_BOOL bool "Built-in kernel command line" |