diff options
Diffstat (limited to 'arch/x86/entry/entry_64_compat.S')
| -rw-r--r-- | arch/x86/entry/entry_64_compat.S | 211 |
1 files changed, 74 insertions, 137 deletions
diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S index f1d3ccae5dd5..4dd19819053a 100644 --- a/arch/x86/entry/entry_64_compat.S +++ b/arch/x86/entry/entry_64_compat.S @@ -4,7 +4,6 @@ * * Copyright 2000-2002 Andi Kleen, SuSE Labs. */ -#include "calling.h" #include <asm/asm-offsets.h> #include <asm/current.h> #include <asm/errno.h> @@ -14,9 +13,12 @@ #include <asm/irqflags.h> #include <asm/asm.h> #include <asm/smap.h> +#include <asm/nospec-branch.h> #include <linux/linkage.h> #include <linux/err.h> +#include "calling.h" + .section .entry.text, "ax" /* @@ -46,66 +48,51 @@ * ebp user stack * 0(%ebp) arg6 */ -SYM_FUNC_START(entry_SYSENTER_compat) +SYM_CODE_START(entry_SYSENTER_compat) + UNWIND_HINT_ENTRY + ENDBR /* Interrupts are off on entry. */ - SWAPGS + swapgs - /* We are about to clobber %rsp anyway, clobbering here is OK */ - SWITCH_TO_KERNEL_CR3 scratch_reg=%rsp + pushq %rax + SWITCH_TO_KERNEL_CR3 scratch_reg=%rax + popq %rax movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp - /* - * User tracing code (ptrace or signal handlers) might assume that - * the saved RAX contains a 32-bit number when we're invoking a 32-bit - * syscall. Just in case the high bits are nonzero, zero-extend - * the syscall number. (This could almost certainly be deleted - * with no ill effects.) - */ - movl %eax, %eax - /* Construct struct pt_regs on stack */ pushq $__USER32_DS /* pt_regs->ss */ - pushq %rbp /* pt_regs->sp (stashed in bp) */ + pushq $0 /* pt_regs->sp = 0 (placeholder) */ /* * Push flags. This is nasty. First, interrupts are currently - * off, but we need pt_regs->flags to have IF set. Second, even - * if TF was set when SYSENTER started, it's clear by now. We fix - * that later using TIF_SINGLESTEP. + * off, but we need pt_regs->flags to have IF set. Second, if TS + * was set in usermode, it's still set, and we're singlestepping + * through this code. do_SYSENTER_32() will fix up IF. */ pushfq /* pt_regs->flags (except IF = 0) */ - orl $X86_EFLAGS_IF, (%rsp) /* Fix saved flags */ pushq $__USER32_CS /* pt_regs->cs */ pushq $0 /* pt_regs->ip = 0 (placeholder) */ +SYM_INNER_LABEL(entry_SYSENTER_compat_after_hwframe, SYM_L_GLOBAL) + + /* + * User tracing code (ptrace or signal handlers) might assume that + * the saved RAX contains a 32-bit number when we're invoking a 32-bit + * syscall. Just in case the high bits are nonzero, zero-extend + * the syscall number. (This could almost certainly be deleted + * with no ill effects.) + */ + movl %eax, %eax + pushq %rax /* pt_regs->orig_ax */ - pushq %rdi /* pt_regs->di */ - pushq %rsi /* pt_regs->si */ - pushq %rdx /* pt_regs->dx */ - pushq %rcx /* pt_regs->cx */ - pushq $-ENOSYS /* pt_regs->ax */ - pushq $0 /* pt_regs->r8 = 0 */ - xorl %r8d, %r8d /* nospec r8 */ - pushq $0 /* pt_regs->r9 = 0 */ - xorl %r9d, %r9d /* nospec r9 */ - pushq $0 /* pt_regs->r10 = 0 */ - xorl %r10d, %r10d /* nospec r10 */ - pushq $0 /* pt_regs->r11 = 0 */ - xorl %r11d, %r11d /* nospec r11 */ - pushq %rbx /* pt_regs->rbx */ - xorl %ebx, %ebx /* nospec rbx */ - pushq %rbp /* pt_regs->rbp (will be overwritten) */ - xorl %ebp, %ebp /* nospec rbp */ - pushq $0 /* pt_regs->r12 = 0 */ - xorl %r12d, %r12d /* nospec r12 */ - pushq $0 /* pt_regs->r13 = 0 */ - xorl %r13d, %r13d /* nospec r13 */ - pushq $0 /* pt_regs->r14 = 0 */ - xorl %r14d, %r14d /* nospec r14 */ - pushq $0 /* pt_regs->r15 = 0 */ - xorl %r15d, %r15d /* nospec r15 */ + PUSH_AND_CLEAR_REGS rax=$-ENOSYS + UNWIND_HINT_REGS + cld + IBRS_ENTER + UNTRAIN_RET + /* * SYSENTER doesn't filter flags, so we need to clear NT and AC * ourselves. To save a few cycles, we can check whether @@ -129,17 +116,11 @@ SYM_FUNC_START(entry_SYSENTER_compat) jnz .Lsysenter_fix_flags .Lsysenter_flags_fixed: - /* - * User mode is traced as though IRQs are on, and SYSENTER - * turned them off. - */ - TRACE_IRQS_OFF - movq %rsp, %rdi - call do_fast_syscall_32 + call do_SYSENTER_32 /* XEN PV guests always use IRET path */ - ALTERNATIVE "testl %eax, %eax; jz .Lsyscall_32_done", \ - "jmp .Lsyscall_32_done", X86_FEATURE_XENPV + ALTERNATIVE "testl %eax, %eax; jz swapgs_restore_regs_and_return_to_usermode", \ + "jmp swapgs_restore_regs_and_return_to_usermode", X86_FEATURE_XENPV jmp sysret32_from_system_call .Lsysenter_fix_flags: @@ -147,7 +128,8 @@ SYM_FUNC_START(entry_SYSENTER_compat) popfq jmp .Lsysenter_flags_fixed SYM_INNER_LABEL(__end_entry_SYSENTER_compat, SYM_L_GLOBAL) -SYM_FUNC_END(entry_SYSENTER_compat) + ANNOTATE_NOENDBR // is_sysenter_singlestep +SYM_CODE_END(entry_SYSENTER_compat) /* * 32-bit SYSCALL entry. @@ -197,6 +179,8 @@ SYM_FUNC_END(entry_SYSENTER_compat) * 0(%esp) arg6 */ SYM_CODE_START(entry_SYSCALL_compat) + UNWIND_HINT_ENTRY + ENDBR /* Interrupts are off on entry. */ swapgs @@ -209,6 +193,9 @@ SYM_CODE_START(entry_SYSCALL_compat) /* Switch to the kernel stack */ movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp +SYM_INNER_LABEL(entry_SYSCALL_compat_safe_stack, SYM_L_GLOBAL) + ANNOTATE_NOENDBR + /* Construct struct pt_regs on stack */ pushq $__USER32_DS /* pt_regs->ss */ pushq %r8 /* pt_regs->sp */ @@ -218,46 +205,17 @@ SYM_CODE_START(entry_SYSCALL_compat) SYM_INNER_LABEL(entry_SYSCALL_compat_after_hwframe, SYM_L_GLOBAL) movl %eax, %eax /* discard orig_ax high bits */ pushq %rax /* pt_regs->orig_ax */ - pushq %rdi /* pt_regs->di */ - pushq %rsi /* pt_regs->si */ - xorl %esi, %esi /* nospec si */ - pushq %rdx /* pt_regs->dx */ - xorl %edx, %edx /* nospec dx */ - pushq %rbp /* pt_regs->cx (stashed in bp) */ - xorl %ecx, %ecx /* nospec cx */ - pushq $-ENOSYS /* pt_regs->ax */ - pushq $0 /* pt_regs->r8 = 0 */ - xorl %r8d, %r8d /* nospec r8 */ - pushq $0 /* pt_regs->r9 = 0 */ - xorl %r9d, %r9d /* nospec r9 */ - pushq $0 /* pt_regs->r10 = 0 */ - xorl %r10d, %r10d /* nospec r10 */ - pushq $0 /* pt_regs->r11 = 0 */ - xorl %r11d, %r11d /* nospec r11 */ - pushq %rbx /* pt_regs->rbx */ - xorl %ebx, %ebx /* nospec rbx */ - pushq %rbp /* pt_regs->rbp (will be overwritten) */ - xorl %ebp, %ebp /* nospec rbp */ - pushq $0 /* pt_regs->r12 = 0 */ - xorl %r12d, %r12d /* nospec r12 */ - pushq $0 /* pt_regs->r13 = 0 */ - xorl %r13d, %r13d /* nospec r13 */ - pushq $0 /* pt_regs->r14 = 0 */ - xorl %r14d, %r14d /* nospec r14 */ - pushq $0 /* pt_regs->r15 = 0 */ - xorl %r15d, %r15d /* nospec r15 */ + PUSH_AND_CLEAR_REGS rcx=%rbp rax=$-ENOSYS + UNWIND_HINT_REGS - /* - * User mode is traced as though IRQs are on, and SYSENTER - * turned them off. - */ - TRACE_IRQS_OFF + IBRS_ENTER + UNTRAIN_RET movq %rsp, %rdi call do_fast_syscall_32 /* XEN PV guests always use IRET path */ - ALTERNATIVE "testl %eax, %eax; jz .Lsyscall_32_done", \ - "jmp .Lsyscall_32_done", X86_FEATURE_XENPV + ALTERNATIVE "testl %eax, %eax; jz swapgs_restore_regs_and_return_to_usermode", \ + "jmp swapgs_restore_regs_and_return_to_usermode", X86_FEATURE_XENPV /* Opportunistic SYSRET */ sysret32_from_system_call: @@ -266,7 +224,9 @@ sysret32_from_system_call: * stack. So let's erase the thread stack right now. */ STACKLEAK_ERASE - TRACE_IRQS_ON /* User mode traces as IRQs on. */ + + IBRS_EXIT + movq RBX(%rsp), %rbx /* pt_regs->rbx */ movq RBP(%rsp), %rbp /* pt_regs->rbp */ movq EFLAGS(%rsp), %r11 /* pt_regs->flags (in r11) */ @@ -294,6 +254,8 @@ sysret32_from_system_call: * code. We zero R8-R10 to avoid info leaks. */ movq RSP-ORIG_RAX(%rsp), %rsp +SYM_INNER_LABEL(entry_SYSRETL_compat_unsafe_stack, SYM_L_GLOBAL) + ANNOTATE_NOENDBR /* * The original userspace %rsp (RSP-ORIG_RAX(%rsp)) is stored @@ -311,6 +273,9 @@ sysret32_from_system_call: xorl %r10d, %r10d swapgs sysretl +SYM_INNER_LABEL(entry_SYSRETL_compat_end, SYM_L_GLOBAL) + ANNOTATE_NOENDBR + int3 SYM_CODE_END(entry_SYSCALL_compat) /* @@ -340,11 +305,13 @@ SYM_CODE_END(entry_SYSCALL_compat) * ebp arg6 */ SYM_CODE_START(entry_INT80_compat) + UNWIND_HINT_ENTRY + ENDBR /* * Interrupts are off on entry. */ ASM_CLAC /* Do this early to minimize exposure */ - SWAPGS + ALTERNATIVE "swapgs", "", X86_FEATURE_XENPV /* * User tracing code (ptrace or signal handlers) might assume that @@ -357,63 +324,33 @@ SYM_CODE_START(entry_INT80_compat) /* switch to thread stack expects orig_ax and rdi to be pushed */ pushq %rax /* pt_regs->orig_ax */ - pushq %rdi /* pt_regs->di */ /* Need to switch before accessing the thread stack. */ - SWITCH_TO_KERNEL_CR3 scratch_reg=%rdi + SWITCH_TO_KERNEL_CR3 scratch_reg=%rax + /* In the Xen PV case we already run on the thread stack. */ - ALTERNATIVE "movq %rsp, %rdi", "jmp .Lint80_keep_stack", X86_FEATURE_XENPV + ALTERNATIVE "", "jmp .Lint80_keep_stack", X86_FEATURE_XENPV + + movq %rsp, %rax movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp - pushq 6*8(%rdi) /* regs->ss */ - pushq 5*8(%rdi) /* regs->rsp */ - pushq 4*8(%rdi) /* regs->eflags */ - pushq 3*8(%rdi) /* regs->cs */ - pushq 2*8(%rdi) /* regs->ip */ - pushq 1*8(%rdi) /* regs->orig_ax */ - pushq (%rdi) /* pt_regs->di */ + pushq 5*8(%rax) /* regs->ss */ + pushq 4*8(%rax) /* regs->rsp */ + pushq 3*8(%rax) /* regs->eflags */ + pushq 2*8(%rax) /* regs->cs */ + pushq 1*8(%rax) /* regs->ip */ + pushq 0*8(%rax) /* regs->orig_ax */ .Lint80_keep_stack: - pushq %rsi /* pt_regs->si */ - xorl %esi, %esi /* nospec si */ - pushq %rdx /* pt_regs->dx */ - xorl %edx, %edx /* nospec dx */ - pushq %rcx /* pt_regs->cx */ - xorl %ecx, %ecx /* nospec cx */ - pushq $-ENOSYS /* pt_regs->ax */ - pushq %r8 /* pt_regs->r8 */ - xorl %r8d, %r8d /* nospec r8 */ - pushq %r9 /* pt_regs->r9 */ - xorl %r9d, %r9d /* nospec r9 */ - pushq %r10 /* pt_regs->r10*/ - xorl %r10d, %r10d /* nospec r10 */ - pushq %r11 /* pt_regs->r11 */ - xorl %r11d, %r11d /* nospec r11 */ - pushq %rbx /* pt_regs->rbx */ - xorl %ebx, %ebx /* nospec rbx */ - pushq %rbp /* pt_regs->rbp */ - xorl %ebp, %ebp /* nospec rbp */ - pushq %r12 /* pt_regs->r12 */ - xorl %r12d, %r12d /* nospec r12 */ - pushq %r13 /* pt_regs->r13 */ - xorl %r13d, %r13d /* nospec r13 */ - pushq %r14 /* pt_regs->r14 */ - xorl %r14d, %r14d /* nospec r14 */ - pushq %r15 /* pt_regs->r15 */ - xorl %r15d, %r15d /* nospec r15 */ + PUSH_AND_CLEAR_REGS rax=$-ENOSYS + UNWIND_HINT_REGS + cld - /* - * User mode is traced as though IRQs are on, and the interrupt - * gate turned them off. - */ - TRACE_IRQS_OFF + IBRS_ENTER + UNTRAIN_RET movq %rsp, %rdi call do_int80_syscall_32 -.Lsyscall_32_done: - - /* Go back to user mode. */ - TRACE_IRQS_ON jmp swapgs_restore_regs_and_return_to_usermode SYM_CODE_END(entry_INT80_compat) |