1 files changed, 93 insertions, 69 deletions

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index c9176bae7fd8..ef29ad001991 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -329,6 +329,30 @@ static __always_inline void setup_smap(struct cpuinfo_x86 *c)
 	}
 }
 
+static __always_inline void setup_umip(struct cpuinfo_x86 *c)
+{
+	/* Check the boot processor, plus build option for UMIP. */
+	if (!cpu_feature_enabled(X86_FEATURE_UMIP))
+		goto out;
+
+	/* Check the current processor's cpuid bits. */
+	if (!cpu_has(c, X86_FEATURE_UMIP))
+		goto out;
+
+	cr4_set_bits(X86_CR4_UMIP);
+
+	pr_info("x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature\n");
+
+	return;
+
+out:
+	/*
+	 * Make sure UMIP is disabled in case it was enabled in a
+	 * previous boot (e.g., via kexec).
+	 */
+	cr4_clear_bits(X86_CR4_UMIP);
+}
+
 /*
  * Protection Keys are not available in 32-bit mode.
  */
@@ -452,8 +476,8 @@ static const char *table_lookup_model(struct cpuinfo_x86 *c)
 	return NULL;		/* Not found */
 }
 
-__u32 cpu_caps_cleared[NCAPINTS];
-__u32 cpu_caps_set[NCAPINTS];
+__u32 cpu_caps_cleared[NCAPINTS + NBUGINTS];
+__u32 cpu_caps_set[NCAPINTS + NBUGINTS];
 
 void load_percpu_segment(int cpu)
 {
@@ -466,28 +490,23 @@ void load_percpu_segment(int cpu)
 	load_stack_canary_segment();
 }
 
-/* Setup the fixmap mapping only once per-processor */
-static inline void setup_fixmap_gdt(int cpu)
-{
-#ifdef CONFIG_X86_64
-	/* On 64-bit systems, we use a read-only fixmap GDT. */
-	pgprot_t prot = PAGE_KERNEL_RO;
-#else
-	/*
-	 * On native 32-bit systems, the GDT cannot be read-only because
-	 * our double fault handler uses a task gate, and entering through
-	 * a task gate needs to change an available TSS to busy.  If the GDT
-	 * is read-only, that will triple fault.
-	 *
-	 * On Xen PV, the GDT must be read-only because the hypervisor requires
-	 * it.
-	 */
-	pgprot_t prot = boot_cpu_has(X86_FEATURE_XENPV) ?
-		PAGE_KERNEL_RO : PAGE_KERNEL;
+#ifdef CONFIG_X86_32
+/* The 32-bit entry code needs to find cpu_entry_area. */
+DEFINE_PER_CPU(struct cpu_entry_area *, cpu_entry_area);
 #endif
 
-	__set_fixmap(get_cpu_gdt_ro_index(cpu), get_cpu_gdt_paddr(cpu), prot);
-}
+#ifdef CONFIG_X86_64
+/*
+ * Special IST stacks which the CPU switches to when it calls
+ * an IST-marked descriptor entry. Up to 7 stacks (hardware
+ * limit), all of them are 4K, except the debug stack which
+ * is 8K.
+ */
+static const unsigned int exception_stack_sizes[N_EXCEPTION_STACKS] = {
+	  [0 ... N_EXCEPTION_STACKS - 1]	= EXCEPTION_STKSZ,
+	  [DEBUG_STACK - 1]			= DEBUG_STKSZ
+};
+#endif
 
 /* Load the original GDT from the per-cpu structure */
 void load_direct_gdt(int cpu)
@@ -723,7 +742,7 @@ static void apply_forced_caps(struct cpuinfo_x86 *c)
 {
 	int i;
 
-	for (i = 0; i < NCAPINTS; i++) {
+	for (i = 0; i < NCAPINTS + NBUGINTS; i++) {
 		c->x86_capability[i] &= ~cpu_caps_cleared[i];
 		c->x86_capability[i] |= cpu_caps_set[i];
 	}
@@ -863,8 +882,8 @@ static void identify_cpu_without_cpuid(struct cpuinfo_x86 *c)
  * cache alignment.
  * The others are not touched to avoid unwanted side effects.
  *
- * WARNING: this function is only called on the BP.  Don't add code here
- * that is supposed to run on all CPUs.
+ * WARNING: this function is only called on the boot CPU.  Don't add code
+ * here that is supposed to run on all CPUs.
  */
 static void __init early_identify_cpu(struct cpuinfo_x86 *c)
 {
@@ -903,6 +922,13 @@ static void __init early_identify_cpu(struct cpuinfo_x86 *c)
 	}
 
 	setup_force_cpu_cap(X86_FEATURE_ALWAYS);
+
+	if (c->x86_vendor != X86_VENDOR_AMD)
+		setup_force_cpu_bug(X86_BUG_CPU_MELTDOWN);
+
+	setup_force_cpu_bug(X86_BUG_SPECTRE_V1);
+	setup_force_cpu_bug(X86_BUG_SPECTRE_V2);
+
 	fpu__init_system(c);
 
 #ifdef CONFIG_X86_32
@@ -1147,9 +1173,10 @@ static void identify_cpu(struct cpuinfo_x86 *c)
 	/* Disable the PN if appropriate */
 	squash_the_stupid_serial_number(c);
 
-	/* Set up SMEP/SMAP */
+	/* Set up SMEP/SMAP/UMIP */
 	setup_smep(c);
 	setup_smap(c);
+	setup_umip(c);
 
 	/*
 	 * The vendor-specific functions might have changed features.
@@ -1225,7 +1252,7 @@ void enable_sep_cpu(void)
 		return;
 
 	cpu = get_cpu();
-	tss = &per_cpu(cpu_tss, cpu);
+	tss = &per_cpu(cpu_tss_rw, cpu);
 
 	/*
 	 * We cache MSR_IA32_SYSENTER_CS's value in the TSS's ss1 field --
@@ -1234,11 +1261,7 @@ void enable_sep_cpu(void)
 
 	tss->x86_tss.ss1 = __KERNEL_CS;
 	wrmsr(MSR_IA32_SYSENTER_CS, tss->x86_tss.ss1, 0);
-
-	wrmsr(MSR_IA32_SYSENTER_ESP,
-	      (unsigned long)tss + offsetofend(struct tss_struct, SYSENTER_stack),
-	      0);
-
+	wrmsr(MSR_IA32_SYSENTER_ESP, (unsigned long)(cpu_entry_stack(cpu) + 1), 0);
 	wrmsr(MSR_IA32_SYSENTER_EIP, (unsigned long)entry_SYSENTER_32, 0);
 
 	put_cpu();
@@ -1301,18 +1324,16 @@ void print_cpu_info(struct cpuinfo_x86 *c)
 		pr_cont(")\n");
 }
 
-static __init int setup_disablecpuid(char *arg)
+/*
+ * clearcpuid= was already parsed in fpu__init_parse_early_param.
+ * But we need to keep a dummy __setup around otherwise it would
+ * show up as an environment variable for init.
+ */
+static __init int setup_clearcpuid(char *arg)
 {
-	int bit;
-
-	if (get_option(&arg, &bit) && bit >= 0 && bit < NCAPINTS * 32)
-		setup_clear_cpu_cap(bit);
-	else
-		return 0;
-
 	return 1;
 }
-__setup("clearcpuid=", setup_disablecpuid);
+__setup("clearcpuid=", setup_clearcpuid);
 
 #ifdef CONFIG_X86_64
 DEFINE_PER_CPU_FIRST(union irq_stack_union,
@@ -1334,25 +1355,22 @@ DEFINE_PER_CPU(unsigned int, irq_count) __visible = -1;
 DEFINE_PER_CPU(int, __preempt_count) = INIT_PREEMPT_COUNT;
 EXPORT_PER_CPU_SYMBOL(__preempt_count);
 
-/*
- * Special IST stacks which the CPU switches to when it calls
- * an IST-marked descriptor entry. Up to 7 stacks (hardware
- * limit), all of them are 4K, except the debug stack which
- * is 8K.
- */
-static const unsigned int exception_stack_sizes[N_EXCEPTION_STACKS] = {
-	  [0 ... N_EXCEPTION_STACKS - 1]	= EXCEPTION_STKSZ,
-	  [DEBUG_STACK - 1]			= DEBUG_STKSZ
-};
-
-static DEFINE_PER_CPU_PAGE_ALIGNED(char, exception_stacks
-	[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ]);
-
 /* May not be marked __init: used by software suspend */
 void syscall_init(void)
 {
+	extern char _entry_trampoline[];
+	extern char entry_SYSCALL_64_trampoline[];
+
+	int cpu = smp_processor_id();
+	unsigned long SYSCALL64_entry_trampoline =
+		(unsigned long)get_cpu_entry_area(cpu)->entry_trampoline +
+		(entry_SYSCALL_64_trampoline - _entry_trampoline);
+
 	wrmsr(MSR_STAR, 0, (__USER32_CS << 16) | __KERNEL_CS);
-	wrmsrl(MSR_LSTAR, (unsigned long)entry_SYSCALL_64);
+	if (static_cpu_has(X86_FEATURE_PTI))
+		wrmsrl(MSR_LSTAR, SYSCALL64_entry_trampoline);
+	else
+		wrmsrl(MSR_LSTAR, (unsigned long)entry_SYSCALL_64);
 
 #ifdef CONFIG_IA32_EMULATION
 	wrmsrl(MSR_CSTAR, (unsigned long)entry_SYSCALL_compat);
@@ -1363,7 +1381,7 @@ void syscall_init(void)
 	 * AMD doesn't allow SYSENTER in long mode (either 32- or 64-bit).
 	 */
 	wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)__KERNEL_CS);
-	wrmsrl_safe(MSR_IA32_SYSENTER_ESP, 0ULL);
+	wrmsrl_safe(MSR_IA32_SYSENTER_ESP, (unsigned long)(cpu_entry_stack(cpu) + 1));
 	wrmsrl_safe(MSR_IA32_SYSENTER_EIP, (u64)entry_SYSENTER_compat);
 #else
 	wrmsrl(MSR_CSTAR, (unsigned long)ignore_sysret);
@@ -1507,7 +1525,7 @@ void cpu_init(void)
 	if (cpu)
 		load_ucode_ap();
 
-	t = &per_cpu(cpu_tss, cpu);
+	t = &per_cpu(cpu_tss_rw, cpu);
 	oist = &per_cpu(orig_ist, cpu);
 
 #ifdef CONFIG_NUMA
@@ -1546,7 +1564,7 @@ void cpu_init(void)
 	 * set up and load the per-CPU TSS
 	 */
 	if (!oist->ist[0]) {
-		char *estacks = per_cpu(exception_stacks, cpu);
+		char *estacks = get_cpu_entry_area(cpu)->exception_stacks;
 
 		for (v = 0; v < N_EXCEPTION_STACKS; v++) {
 			estacks += exception_stack_sizes[v];
@@ -1557,7 +1575,7 @@ void cpu_init(void)
 		}
 	}
 
-	t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
+	t->x86_tss.io_bitmap_base = IO_BITMAP_OFFSET;
 
 	/*
 	 * <= is required because the CPU will access up to
@@ -1572,9 +1590,14 @@ void cpu_init(void)
 	initialize_tlbstate_and_flush();
 	enter_lazy_tlb(&init_mm, me);
 
-	load_sp0(t, &current->thread);
-	set_tss_desc(cpu, t);
+	/*
+	 * Initialize the TSS.  sp0 points to the entry trampoline stack
+	 * regardless of what task is running.
+	 */
+	set_tss_desc(cpu, &get_cpu_entry_area(cpu)->tss.x86_tss);
 	load_TR_desc();
+	load_sp0((unsigned long)(cpu_entry_stack(cpu) + 1));
+
 	load_mm_ldt(&init_mm);
 
 	clear_all_debug_regs();
@@ -1585,7 +1608,6 @@ void cpu_init(void)
 	if (is_uv_system())
 		uv_cpu_init();
 
-	setup_fixmap_gdt(cpu);
 	load_fixmap_gdt(cpu);
 }
 
@@ -1595,8 +1617,7 @@ void cpu_init(void)
 {
 	int cpu = smp_processor_id();
 	struct task_struct *curr = current;
-	struct tss_struct *t = &per_cpu(cpu_tss, cpu);
-	struct thread_struct *thread = &curr->thread;
+	struct tss_struct *t = &per_cpu(cpu_tss_rw, cpu);
 
 	wait_for_master_cpu(cpu);
 
@@ -1627,12 +1648,16 @@ void cpu_init(void)
 	initialize_tlbstate_and_flush();
 	enter_lazy_tlb(&init_mm, curr);
 
-	load_sp0(t, thread);
-	set_tss_desc(cpu, t);
+	/*
+	 * Initialize the TSS.  Don't bother initializing sp0, as the initial
+	 * task never enters user mode.
+	 */
+	set_tss_desc(cpu, &get_cpu_entry_area(cpu)->tss.x86_tss);
 	load_TR_desc();
+
 	load_mm_ldt(&init_mm);
 
-	t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
+	t->x86_tss.io_bitmap_base = IO_BITMAP_OFFSET;
 
 #ifdef CONFIG_DOUBLEFAULT
 	/* Set up doublefault TSS pointer in the GDT */
@@ -1644,7 +1669,6 @@ void cpu_init(void)
 
 	fpu__init_cpu();
 
-	setup_fixmap_gdt(cpu);
 	load_fixmap_gdt(cpu);
 }
 #endif