diff options
Diffstat (limited to 'arch/x86/kernel/setup.c')
| -rw-r--r-- | arch/x86/kernel/setup.c | 235 |
1 files changed, 114 insertions, 121 deletions
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index c3a4fbb2b996..21c6746338af 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -31,6 +31,7 @@ #include <linux/apm_bios.h> #include <linux/initrd.h> #include <linux/bootmem.h> +#include <linux/memblock.h> #include <linux/seq_file.h> #include <linux/console.h> #include <linux/mca.h> @@ -83,7 +84,6 @@ #include <asm/dmi.h> #include <asm/io_apic.h> #include <asm/ist.h> -#include <asm/vmi.h> #include <asm/setup_arch.h> #include <asm/bios_ebda.h> #include <asm/cacheflush.h> @@ -107,11 +107,12 @@ #include <asm/percpu.h> #include <asm/topology.h> #include <asm/apicdef.h> -#include <asm/k8.h> +#include <asm/amd_nb.h> #ifdef CONFIG_X86_64 #include <asm/numa_64.h> #endif #include <asm/mce.h> +#include <asm/alternative.h> /* * end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries. @@ -125,7 +126,6 @@ unsigned long max_pfn_mapped; RESERVE_BRK(dmi_alloc, 65536); #endif -unsigned int boot_cpu_id __read_mostly; static __initdata unsigned long _brk_start = (unsigned long)__brk_base; unsigned long _brk_end = (unsigned long)__brk_base; @@ -302,7 +302,7 @@ static inline void init_gbpages(void) static void __init reserve_brk(void) { if (_brk_end > _brk_start) - reserve_early(__pa(_brk_start), __pa(_brk_end), "BRK"); + memblock_x86_reserve_range(__pa(_brk_start), __pa(_brk_end), "BRK"); /* Mark brk area as locked down and no longer taking any new allocations */ @@ -324,17 +324,16 @@ static void __init relocate_initrd(void) char *p, *q; /* We need to move the initrd down into lowmem */ - ramdisk_here = find_e820_area(0, end_of_lowmem, area_size, + ramdisk_here = memblock_find_in_range(0, end_of_lowmem, area_size, PAGE_SIZE); - if (ramdisk_here == -1ULL) + if (ramdisk_here == MEMBLOCK_ERROR) panic("Cannot find place for new RAMDISK of size %lld\n", ramdisk_size); /* Note: this includes all the lowmem currently occupied by the initrd, we rely on that fact to keep the data intact. */ - reserve_early(ramdisk_here, ramdisk_here + area_size, - "NEW RAMDISK"); + memblock_x86_reserve_range(ramdisk_here, ramdisk_here + area_size, "NEW RAMDISK"); initrd_start = ramdisk_here + PAGE_OFFSET; initrd_end = initrd_start + ramdisk_size; printk(KERN_INFO "Allocated new RAMDISK: %08llx - %08llx\n", @@ -390,7 +389,7 @@ static void __init reserve_initrd(void) initrd_start = 0; if (ramdisk_size >= (end_of_lowmem>>1)) { - free_early(ramdisk_image, ramdisk_end); + memblock_x86_free_range(ramdisk_image, ramdisk_end); printk(KERN_ERR "initrd too large to handle, " "disabling initrd\n"); return; @@ -413,7 +412,7 @@ static void __init reserve_initrd(void) relocate_initrd(); - free_early(ramdisk_image, ramdisk_end); + memblock_x86_free_range(ramdisk_image, ramdisk_end); } #else static void __init reserve_initrd(void) @@ -469,7 +468,7 @@ static void __init e820_reserve_setup_data(void) e820_print_map("reserve setup_data"); } -static void __init reserve_early_setup_data(void) +static void __init memblock_x86_reserve_range_setup_data(void) { struct setup_data *data; u64 pa_data; @@ -481,7 +480,7 @@ static void __init reserve_early_setup_data(void) while (pa_data) { data = early_memremap(pa_data, sizeof(*data)); sprintf(buf, "setup data %x", data->type); - reserve_early(pa_data, pa_data+sizeof(*data)+data->len, buf); + memblock_x86_reserve_range(pa_data, pa_data+sizeof(*data)+data->len, buf); pa_data = data->next; early_iounmap(data, sizeof(*data)); } @@ -502,6 +501,7 @@ static inline unsigned long long get_total_mem(void) return total << PAGE_SHIFT; } +#define DEFAULT_BZIMAGE_ADDR_MAX 0x37FFFFFF static void __init reserve_crashkernel(void) { unsigned long long total_mem; @@ -519,23 +519,27 @@ static void __init reserve_crashkernel(void) if (crash_base <= 0) { const unsigned long long alignment = 16<<20; /* 16M */ - crash_base = find_e820_area(alignment, ULONG_MAX, crash_size, - alignment); - if (crash_base == -1ULL) { + /* + * kexec want bzImage is below DEFAULT_BZIMAGE_ADDR_MAX + */ + crash_base = memblock_find_in_range(alignment, + DEFAULT_BZIMAGE_ADDR_MAX, crash_size, alignment); + + if (crash_base == MEMBLOCK_ERROR) { pr_info("crashkernel reservation failed - No suitable area found.\n"); return; } } else { unsigned long long start; - start = find_e820_area(crash_base, ULONG_MAX, crash_size, - 1<<20); + start = memblock_find_in_range(crash_base, + crash_base + crash_size, crash_size, 1<<20); if (start != crash_base) { pr_info("crashkernel reservation failed - memory is in use.\n"); return; } } - reserve_early(crash_base, crash_base + crash_size, "CRASH KERNEL"); + memblock_x86_reserve_range(crash_base, crash_base + crash_size, "CRASH KERNEL"); printk(KERN_INFO "Reserving %ldMB of memory at %ldMB " "for crashkernel (System RAM: %ldMB)\n", @@ -615,82 +619,10 @@ static __init void reserve_ibft_region(void) addr = find_ibft_region(&size); if (size) - reserve_early_overlap_ok(addr, addr + size, "ibft"); + memblock_x86_reserve_range(addr, addr + size, "* ibft"); } -#ifdef CONFIG_X86_RESERVE_LOW_64K -static int __init dmi_low_memory_corruption(const struct dmi_system_id *d) -{ - printk(KERN_NOTICE - "%s detected: BIOS may corrupt low RAM, working around it.\n", - d->ident); - - e820_update_range(0, 0x10000, E820_RAM, E820_RESERVED); - sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map); - - return 0; -} -#endif - -/* List of systems that have known low memory corruption BIOS problems */ -static struct dmi_system_id __initdata bad_bios_dmi_table[] = { -#ifdef CONFIG_X86_RESERVE_LOW_64K - { - .callback = dmi_low_memory_corruption, - .ident = "AMI BIOS", - .matches = { - DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."), - }, - }, - { - .callback = dmi_low_memory_corruption, - .ident = "Phoenix BIOS", - .matches = { - DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies"), - }, - }, - { - .callback = dmi_low_memory_corruption, - .ident = "Phoenix/MSC BIOS", - .matches = { - DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix/MSC"), - }, - }, - /* - * AMI BIOS with low memory corruption was found on Intel DG45ID and - * DG45FC boards. - * It has a different DMI_BIOS_VENDOR = "Intel Corp.", for now we will - * match only DMI_BOARD_NAME and see if there is more bad products - * with this vendor. - */ - { - .callback = dmi_low_memory_corruption, - .ident = "AMI BIOS", - .matches = { - DMI_MATCH(DMI_BOARD_NAME, "DG45ID"), - }, - }, - { - .callback = dmi_low_memory_corruption, - .ident = "AMI BIOS", - .matches = { - DMI_MATCH(DMI_BOARD_NAME, "DG45FC"), - }, - }, - /* - * The Dell Inspiron Mini 1012 has DMI_BIOS_VENDOR = "Dell Inc.", so - * match on the product name. - */ - { - .callback = dmi_low_memory_corruption, - .ident = "Phoenix BIOS", - .matches = { - DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1012"), - }, - }, -#endif - {} -}; +static unsigned reserve_low = CONFIG_X86_RESERVE_LOW << 10; static void __init trim_bios_range(void) { @@ -698,8 +630,14 @@ static void __init trim_bios_range(void) * A special case is the first 4Kb of memory; * This is a BIOS owned area, not kernel ram, but generally * not listed as such in the E820 table. + * + * This typically reserves additional memory (64KiB by default) + * since some BIOSes are known to corrupt low memory. See the + * Kconfig help text for X86_RESERVE_LOW. */ - e820_update_range(0, PAGE_SIZE, E820_RAM, E820_RESERVED); + e820_update_range(0, ALIGN(reserve_low, PAGE_SIZE), + E820_RAM, E820_RESERVED); + /* * special case: Some BIOSen report the PC BIOS * area (640->1Mb) as ram even though it is not. @@ -709,6 +647,37 @@ static void __init trim_bios_range(void) sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map); } +static int __init parse_reservelow(char *p) +{ + unsigned long long size; + + if (!p) + return -EINVAL; + + size = memparse(p, &p); + + if (size < 4096) + size = 4096; + + if (size > 640*1024) + size = 640*1024; + + reserve_low = size; + + return 0; +} + +early_param("reservelow", parse_reservelow); + +static u64 __init get_max_mapped(void) +{ + u64 end = max_pfn_mapped; + + end <<= PAGE_SHIFT; + + return end; +} + /* * Determine if we were loaded by an EFI loader. If so, then we have also been * passed the efi memmap, systab, etc., so we should use these data structures @@ -726,18 +695,30 @@ void __init setup_arch(char **cmdline_p) { int acpi = 0; int k8 = 0; + unsigned long flags; #ifdef CONFIG_X86_32 memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data)); visws_early_detect(); + + /* + * copy kernel address range established so far and switch + * to the proper swapper page table + */ + clone_pgd_range(swapper_pg_dir + KERNEL_PGD_BOUNDARY, + initial_page_table + KERNEL_PGD_BOUNDARY, + KERNEL_PGD_PTRS); + + load_cr3(swapper_pg_dir); + __flush_tlb_all(); #else printk(KERN_INFO "Command line: %s\n", boot_command_line); #endif - /* VMI may relocate the fixmap; do this before touching ioremap area */ - vmi_init(); - - /* OFW also may relocate the fixmap */ + /* + * If we have OLPC OFW, we might end up relocating the fixmap due to + * reserve_top(), so do this before touching the ioremap area. + */ olpc_ofw_detect(); early_trap_init(); @@ -782,12 +763,14 @@ void __init setup_arch(char **cmdline_p) #endif 4)) { efi_enabled = 1; - efi_reserve_early(); + efi_memblock_x86_reserve_range(); } #endif x86_init.oem.arch_setup(); + resource_alloc_from_bottom = 0; + iomem_resource.end = (1ULL << boot_cpu_data.x86_phys_bits) - 1; setup_memory_map(); parse_setup_data(); /* update the e820_saved too */ @@ -838,11 +821,8 @@ void __init setup_arch(char **cmdline_p) x86_report_nx(); - /* Must be before kernel pagetables are setup */ - vmi_activate(); - /* after early param, so could get panic from serial */ - reserve_early_setup_data(); + memblock_x86_reserve_range_setup_data(); if (acpi_mps_check()) { #ifdef CONFIG_X86_LOCAL_APIC @@ -863,8 +843,6 @@ void __init setup_arch(char **cmdline_p) dmi_scan_machine(); - dmi_check_system(bad_bios_dmi_table); - /* * VMware detection requires dmi to be available, so this * needs to be done after dmi_scan_machine, for the BP. @@ -897,8 +875,6 @@ void __init setup_arch(char **cmdline_p) */ max_pfn = e820_end_of_ram_pfn(); - /* preallocate 4k for mptable mpc */ - early_reserve_e820_mpc_new(); /* update e820 for memory not covered by WB MTRRs */ mtrr_bp_init(); if (mtrr_trim_uncached_memory(max_pfn)) @@ -920,18 +896,8 @@ void __init setup_arch(char **cmdline_p) max_low_pfn = max_pfn; high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1; - max_pfn_mapped = KERNEL_IMAGE_SIZE >> PAGE_SHIFT; #endif -#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION - setup_bios_corruption_check(); -#endif - - printk(KERN_DEBUG "initial memory mapped : 0 - %08lx\n", - max_pfn_mapped<<PAGE_SHIFT); - - reserve_brk(); - /* * Find and reserve possible boot-time SMP configuration: */ @@ -939,6 +905,26 @@ void __init setup_arch(char **cmdline_p) reserve_ibft_region(); + /* + * Need to conclude brk, before memblock_x86_fill() + * it could use memblock_find_in_range, could overlap with + * brk area. + */ + reserve_brk(); + + memblock.current_limit = get_max_mapped(); + memblock_x86_fill(); + + /* preallocate 4k for mptable mpc */ + early_reserve_e820_mpc_new(); + +#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION + setup_bios_corruption_check(); +#endif + + printk(KERN_DEBUG "initial memory mapped : 0 - %08lx\n", + max_pfn_mapped<<PAGE_SHIFT); + reserve_trampoline_memory(); #ifdef CONFIG_ACPI_SLEEP @@ -962,6 +948,7 @@ void __init setup_arch(char **cmdline_p) max_low_pfn = max_pfn; } #endif + memblock.current_limit = get_max_mapped(); /* * NOTE: On x86-32, only from this point on, fixmaps are ready for use. @@ -1000,10 +987,7 @@ void __init setup_arch(char **cmdline_p) #endif initmem_init(0, max_pfn, acpi, k8); -#ifndef CONFIG_NO_BOOTMEM - early_res_to_bootmem(0, max_low_pfn<<PAGE_SHIFT); -#endif - + memblock_find_dma_reserve(); dma32_reserve_bootmem(); #ifdef CONFIG_KVM_CLOCK @@ -1014,7 +998,12 @@ void __init setup_arch(char **cmdline_p) paging_init(); x86_init.paging.pagetable_setup_done(swapper_pg_dir); - setup_trampoline_page_table(); +#ifdef CONFIG_X86_32 + /* sync back kernel address range */ + clone_pgd_range(initial_page_table + KERNEL_PGD_BOUNDARY, + swapper_pg_dir + KERNEL_PGD_BOUNDARY, + KERNEL_PGD_PTRS); +#endif tboot_probe(); @@ -1071,6 +1060,10 @@ void __init setup_arch(char **cmdline_p) x86_init.oem.banner(); mcheck_init(); + + local_irq_save(flags); + arch_init_ideal_nop5(); + local_irq_restore(flags); } #ifdef CONFIG_X86_32 |