diff options
Diffstat (limited to 'arch/x86/kernel/time_64.c')
| -rw-r--r-- | arch/x86/kernel/time_64.c | 187 |
1 files changed, 16 insertions, 171 deletions
diff --git a/arch/x86/kernel/time_64.c b/arch/x86/kernel/time_64.c index 368b1942b39a..0380795121a6 100644 --- a/arch/x86/kernel/time_64.c +++ b/arch/x86/kernel/time_64.c @@ -11,43 +11,18 @@ * RTC support code taken from arch/i386/kernel/timers/time_hpet.c */ -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/interrupt.h> +#include <linux/clockchips.h> #include <linux/init.h> -#include <linux/mc146818rtc.h> -#include <linux/time.h> -#include <linux/ioport.h> +#include <linux/interrupt.h> #include <linux/module.h> -#include <linux/device.h> -#include <linux/sysdev.h> -#include <linux/bcd.h> -#include <linux/notifier.h> -#include <linux/cpu.h> -#include <linux/kallsyms.h> -#include <linux/acpi.h> -#include <linux/clockchips.h> +#include <linux/time.h> -#ifdef CONFIG_ACPI -#include <acpi/achware.h> /* for PM timer frequency */ -#include <acpi/acpi_bus.h> -#endif #include <asm/i8253.h> -#include <asm/pgtable.h> -#include <asm/vsyscall.h> -#include <asm/timex.h> -#include <asm/proto.h> -#include <asm/hpet.h> -#include <asm/sections.h> -#include <linux/hpet.h> -#include <asm/apic.h> #include <asm/hpet.h> -#include <asm/mpspec.h> #include <asm/nmi.h> #include <asm/vgtod.h> - -DEFINE_SPINLOCK(rtc_lock); -EXPORT_SYMBOL(rtc_lock); +#include <asm/time.h> +#include <asm/timer.h> volatile unsigned long __jiffies __section_jiffies = INITIAL_JIFFIES; @@ -56,10 +31,10 @@ unsigned long profile_pc(struct pt_regs *regs) unsigned long pc = instruction_pointer(regs); /* Assume the lock function has either no stack frame or a copy - of eflags from PUSHF + of flags from PUSHF Eflags always has bits 22 and up cleared unlike kernel addresses. */ if (!user_mode(regs) && in_lock_functions(pc)) { - unsigned long *sp = (unsigned long *)regs->rsp; + unsigned long *sp = (unsigned long *)regs->sp; if (sp[0] >> 22) return sp[0]; if (sp[1] >> 22) @@ -69,82 +44,6 @@ unsigned long profile_pc(struct pt_regs *regs) } EXPORT_SYMBOL(profile_pc); -/* - * In order to set the CMOS clock precisely, set_rtc_mmss has to be called 500 - * ms after the second nowtime has started, because when nowtime is written - * into the registers of the CMOS clock, it will jump to the next second - * precisely 500 ms later. Check the Motorola MC146818A or Dallas DS12887 data - * sheet for details. - */ - -static int set_rtc_mmss(unsigned long nowtime) -{ - int retval = 0; - int real_seconds, real_minutes, cmos_minutes; - unsigned char control, freq_select; - unsigned long flags; - -/* - * set_rtc_mmss is called when irqs are enabled, so disable irqs here - */ - spin_lock_irqsave(&rtc_lock, flags); -/* - * Tell the clock it's being set and stop it. - */ - control = CMOS_READ(RTC_CONTROL); - CMOS_WRITE(control | RTC_SET, RTC_CONTROL); - - freq_select = CMOS_READ(RTC_FREQ_SELECT); - CMOS_WRITE(freq_select | RTC_DIV_RESET2, RTC_FREQ_SELECT); - - cmos_minutes = CMOS_READ(RTC_MINUTES); - BCD_TO_BIN(cmos_minutes); - -/* - * since we're only adjusting minutes and seconds, don't interfere with hour - * overflow. This avoids messing with unknown time zones but requires your RTC - * not to be off by more than 15 minutes. Since we're calling it only when - * our clock is externally synchronized using NTP, this shouldn't be a problem. - */ - - real_seconds = nowtime % 60; - real_minutes = nowtime / 60; - if (((abs(real_minutes - cmos_minutes) + 15) / 30) & 1) - real_minutes += 30; /* correct for half hour time zone */ - real_minutes %= 60; - - if (abs(real_minutes - cmos_minutes) >= 30) { - printk(KERN_WARNING "time.c: can't update CMOS clock " - "from %d to %d\n", cmos_minutes, real_minutes); - retval = -1; - } else { - BIN_TO_BCD(real_seconds); - BIN_TO_BCD(real_minutes); - CMOS_WRITE(real_seconds, RTC_SECONDS); - CMOS_WRITE(real_minutes, RTC_MINUTES); - } - -/* - * The following flags have to be released exactly in this order, otherwise the - * DS12887 (popular MC146818A clone with integrated battery and quartz) will - * not reset the oscillator and will not update precisely 500 ms later. You - * won't find this mentioned in the Dallas Semiconductor data sheets, but who - * believes data sheets anyway ... -- Markus Kuhn - */ - - CMOS_WRITE(control, RTC_CONTROL); - CMOS_WRITE(freq_select, RTC_FREQ_SELECT); - - spin_unlock_irqrestore(&rtc_lock, flags); - - return retval; -} - -int update_persistent_clock(struct timespec now) -{ - return set_rtc_mmss(now.tv_sec); -} - static irqreturn_t timer_event_interrupt(int irq, void *dev_id) { add_pda(irq0_irqs, 1); @@ -154,67 +53,10 @@ static irqreturn_t timer_event_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -unsigned long read_persistent_clock(void) -{ - unsigned int year, mon, day, hour, min, sec; - unsigned long flags; - unsigned century = 0; - - spin_lock_irqsave(&rtc_lock, flags); - /* - * if UIP is clear, then we have >= 244 microseconds before RTC - * registers will be updated. Spec sheet says that this is the - * reliable way to read RTC - registers invalid (off bus) during update - */ - while ((CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)) - cpu_relax(); - - - /* now read all RTC registers while stable with interrupts disabled */ - sec = CMOS_READ(RTC_SECONDS); - min = CMOS_READ(RTC_MINUTES); - hour = CMOS_READ(RTC_HOURS); - day = CMOS_READ(RTC_DAY_OF_MONTH); - mon = CMOS_READ(RTC_MONTH); - year = CMOS_READ(RTC_YEAR); -#ifdef CONFIG_ACPI - if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID && - acpi_gbl_FADT.century) - century = CMOS_READ(acpi_gbl_FADT.century); -#endif - spin_unlock_irqrestore(&rtc_lock, flags); - - /* - * We know that x86-64 always uses BCD format, no need to check the - * config register. - */ - - BCD_TO_BIN(sec); - BCD_TO_BIN(min); - BCD_TO_BIN(hour); - BCD_TO_BIN(day); - BCD_TO_BIN(mon); - BCD_TO_BIN(year); - - if (century) { - BCD_TO_BIN(century); - year += century * 100; - printk(KERN_INFO "Extended CMOS year: %d\n", century * 100); - } else { - /* - * x86-64 systems only exists since 2002. - * This will work up to Dec 31, 2100 - */ - year += 2000; - } - - return mktime(year, mon, day, hour, min, sec); -} - /* calibrate_cpu is used on systems with fixed rate TSCs to determine * processor frequency */ #define TICK_COUNT 100000000 -static unsigned int __init tsc_calibrate_cpu_khz(void) +unsigned long __init native_calculate_cpu_khz(void) { int tsc_start, tsc_now; int i, no_ctr_free; @@ -241,7 +83,7 @@ static unsigned int __init tsc_calibrate_cpu_khz(void) rdtscl(tsc_start); do { rdmsrl(MSR_K7_PERFCTR0 + i, pmc_now); - tsc_now = get_cycles_sync(); + tsc_now = get_cycles(); } while ((tsc_now - tsc_start) < TICK_COUNT); local_irq_restore(flags); @@ -264,20 +106,22 @@ static struct irqaction irq0 = { .name = "timer" }; -void __init time_init(void) +void __init hpet_time_init(void) { if (!hpet_enable()) setup_pit_timer(); setup_irq(0, &irq0); +} +void __init time_init(void) +{ tsc_calibrate(); cpu_khz = tsc_khz; if (cpu_has(&boot_cpu_data, X86_FEATURE_CONSTANT_TSC) && - boot_cpu_data.x86_vendor == X86_VENDOR_AMD && - boot_cpu_data.x86 == 16) - cpu_khz = tsc_calibrate_cpu_khz(); + (boot_cpu_data.x86_vendor == X86_VENDOR_AMD)) + cpu_khz = calculate_cpu_khz(); if (unsynchronized_tsc()) mark_tsc_unstable("TSCs unsynchronized"); @@ -290,4 +134,5 @@ void __init time_init(void) printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n", cpu_khz / 1000, cpu_khz % 1000); init_tsc_clocksource(); + late_time_init = choose_time_init(); } |