1 files changed, 0 insertions, 245 deletions
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
deleted file mode 100644
index 7913b6921959..000000000000
--- a/arch/x86/oprofile/op_model_ppro.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * @file op_model_ppro.h
- * Family 6 perfmon and architectural perfmon MSR operations
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Copyright 2008 Intel Corporation
- * @remark Read the file COPYING
- *
- * @author John Levon
- * @author Philippe Elie
- * @author Graydon Hoare
- * @author Andi Kleen
- * @author Robert Richter <robert.richter@amd.com>
- */
-
-#include <linux/oprofile.h>
-#include <linux/slab.h>
-#include <asm/ptrace.h>
-#include <asm/msr.h>
-#include <asm/apic.h>
-#include <asm/nmi.h>
-
-#include "op_x86_model.h"
-#include "op_counter.h"
-
-static int num_counters = 2;
-static int counter_width = 32;
-
-#define MSR_PPRO_EVENTSEL_RESERVED	((0xFFFFFFFFULL<<32)|(1ULL<<21))
-
-static u64 reset_value[OP_MAX_COUNTER];
-
-static void ppro_shutdown(struct op_msrs const * const msrs)
-{
-	int i;
-
-	for (i = 0; i < num_counters; ++i) {
-		if (!msrs->counters[i].addr)
-			continue;
-		release_perfctr_nmi(MSR_P6_PERFCTR0 + i);
-		release_evntsel_nmi(MSR_P6_EVNTSEL0 + i);
-	}
-}
-
-static int ppro_fill_in_addresses(struct op_msrs * const msrs)
-{
-	int i;
-
-	for (i = 0; i < num_counters; i++) {
-		if (!reserve_perfctr_nmi(MSR_P6_PERFCTR0 + i))
-			goto fail;
-		if (!reserve_evntsel_nmi(MSR_P6_EVNTSEL0 + i)) {
-			release_perfctr_nmi(MSR_P6_PERFCTR0 + i);
-			goto fail;
-		}
-		/* both registers must be reserved */
-		msrs->counters[i].addr = MSR_P6_PERFCTR0 + i;
-		msrs->controls[i].addr = MSR_P6_EVNTSEL0 + i;
-		continue;
-	fail:
-		if (!counter_config[i].enabled)
-			continue;
-		op_x86_warn_reserved(i);
-		ppro_shutdown(msrs);
-		return -EBUSY;
-	}
-
-	return 0;
-}
-
-
-static void ppro_setup_ctrs(struct op_x86_model_spec const *model,
-			    struct op_msrs const * const msrs)
-{
-	u64 val;
-	int i;
-
-	if (boot_cpu_has(X86_FEATURE_ARCH_PERFMON)) {
-		union cpuid10_eax eax;
-		eax.full = cpuid_eax(0xa);
-
-		/*
-		 * For Core2 (family 6, model 15), don't reset the
-		 * counter width:
-		 */
-		if (!(eax.split.version_id == 0 &&
-			__this_cpu_read(cpu_info.x86) == 6 &&
-				__this_cpu_read(cpu_info.x86_model) == 15)) {
-
-			if (counter_width < eax.split.bit_width)
-				counter_width = eax.split.bit_width;
-		}
-	}
-
-	/* clear all counters */
-	for (i = 0; i < num_counters; ++i) {
-		if (!msrs->controls[i].addr)
-			continue;
-		rdmsrl(msrs->controls[i].addr, val);
-		if (val & ARCH_PERFMON_EVENTSEL_ENABLE)
-			op_x86_warn_in_use(i);
-		val &= model->reserved;
-		wrmsrl(msrs->controls[i].addr, val);
-		/*
-		 * avoid a false detection of ctr overflows in NMI *
-		 * handler
-		 */
-		wrmsrl(msrs->counters[i].addr, -1LL);
-	}
-
-	/* enable active counters */
-	for (i = 0; i < num_counters; ++i) {
-		if (counter_config[i].enabled && msrs->counters[i].addr) {
-			reset_value[i] = counter_config[i].count;
-			wrmsrl(msrs->counters[i].addr, -reset_value[i]);
-			rdmsrl(msrs->controls[i].addr, val);
-			val &= model->reserved;
-			val |= op_x86_get_ctrl(model, &counter_config[i]);
-			wrmsrl(msrs->controls[i].addr, val);
-		} else {
-			reset_value[i] = 0;
-		}
-	}
-}
-
-
-static int ppro_check_ctrs(struct pt_regs * const regs,
-			   struct op_msrs const * const msrs)
-{
-	u64 val;
-	int i;
-
-	for (i = 0; i < num_counters; ++i) {
-		if (!reset_value[i])
-			continue;
-		rdmsrl(msrs->counters[i].addr, val);
-		if (val & (1ULL << (counter_width - 1)))
-			continue;
-		oprofile_add_sample(regs, i);
-		wrmsrl(msrs->counters[i].addr, -reset_value[i]);
-	}
-
-	/* Only P6 based Pentium M need to re-unmask the apic vector but it
-	 * doesn't hurt other P6 variant */
-	apic_write(APIC_LVTPC, apic_read(APIC_LVTPC) & ~APIC_LVT_MASKED);
-
-	/* We can't work out if we really handled an interrupt. We
-	 * might have caught a *second* counter just after overflowing
-	 * the interrupt for this counter then arrives
-	 * and we don't find a counter that's overflowed, so we
-	 * would return 0 and get dazed + confused. Instead we always
-	 * assume we found an overflow. This sucks.
-	 */
-	return 1;
-}
-
-
-static void ppro_start(struct op_msrs const * const msrs)
-{
-	u64 val;
-	int i;
-
-	for (i = 0; i < num_counters; ++i) {
-		if (reset_value[i]) {
-			rdmsrl(msrs->controls[i].addr, val);
-			val |= ARCH_PERFMON_EVENTSEL_ENABLE;
-			wrmsrl(msrs->controls[i].addr, val);
-		}
-	}
-}
-
-
-static void ppro_stop(struct op_msrs const * const msrs)
-{
-	u64 val;
-	int i;
-
-	for (i = 0; i < num_counters; ++i) {
-		if (!reset_value[i])
-			continue;
-		rdmsrl(msrs->controls[i].addr, val);
-		val &= ~ARCH_PERFMON_EVENTSEL_ENABLE;
-		wrmsrl(msrs->controls[i].addr, val);
-	}
-}
-
-struct op_x86_model_spec op_ppro_spec = {
-	.num_counters		= 2,
-	.num_controls		= 2,
-	.reserved		= MSR_PPRO_EVENTSEL_RESERVED,
-	.fill_in_addresses	= &ppro_fill_in_addresses,
-	.setup_ctrs		= &ppro_setup_ctrs,
-	.check_ctrs		= &ppro_check_ctrs,
-	.start			= &ppro_start,
-	.stop			= &ppro_stop,
-	.shutdown		= &ppro_shutdown
-};
-
-/*
- * Architectural performance monitoring.
- *
- * Newer Intel CPUs (Core1+) have support for architectural
- * events described in CPUID 0xA. See the IA32 SDM Vol3b.18 for details.
- * The advantage of this is that it can be done without knowing about
- * the specific CPU.
- */
-
-static void arch_perfmon_setup_counters(void)
-{
-	union cpuid10_eax eax;
-
-	eax.full = cpuid_eax(0xa);
-
-	/* Workaround for BIOS bugs in 6/15. Taken from perfmon2 */
-	if (eax.split.version_id == 0 && boot_cpu_data.x86 == 6 &&
-	    boot_cpu_data.x86_model == 15) {
-		eax.split.version_id = 2;
-		eax.split.num_counters = 2;
-		eax.split.bit_width = 40;
-	}
-
-	num_counters = min((int)eax.split.num_counters, OP_MAX_COUNTER);
-
-	op_arch_perfmon_spec.num_counters = num_counters;
-	op_arch_perfmon_spec.num_controls = num_counters;
-}
-
-static int arch_perfmon_init(struct oprofile_operations *ignore)
-{
-	arch_perfmon_setup_counters();
-	return 0;
-}
-
-struct op_x86_model_spec op_arch_perfmon_spec = {
-	.reserved		= MSR_PPRO_EVENTSEL_RESERVED,
-	.init			= &arch_perfmon_init,
-	/* num_counters/num_controls filled in at runtime */
-	.fill_in_addresses	= &ppro_fill_in_addresses,
-	/* user space does the cpuid check for available events */
-	.setup_ctrs		= &ppro_setup_ctrs,
-	.check_ctrs		= &ppro_check_ctrs,
-	.start			= &ppro_start,
-	.stop			= &ppro_stop,
-	.shutdown		= &ppro_shutdown
-};