diff options
Diffstat (limited to 'arch/x86/pci/fixup.c')
| -rw-r--r-- | arch/x86/pci/fixup.c | 60 |
1 files changed, 54 insertions, 6 deletions
diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c index e723559c386a..615a76d70019 100644 --- a/arch/x86/pci/fixup.c +++ b/arch/x86/pci/fixup.c @@ -353,8 +353,8 @@ static void pci_fixup_video(struct pci_dev *pdev) } } } -DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_DISPLAY_VGA, 8, pci_fixup_video); +DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_DISPLAY_VGA, 8, pci_fixup_video); static const struct dmi_system_id msi_k8t_dmi_table[] = { @@ -375,7 +375,7 @@ static const struct dmi_system_id msi_k8t_dmi_table[] = { * The BIOS only gives options "DISABLED" and "AUTO". This code sets * the corresponding register-value to enable the soundcard. * - * The soundcard is only enabled, if the mainborad is identified + * The soundcard is only enabled, if the mainboard is identified * via DMI-tables and the soundcard is detected to be off. */ static void pci_fixup_msi_k8t_onboard_sound(struct pci_dev *dev) @@ -557,12 +557,12 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x27B9, twinhead_reserve_killing_z * Device [8086:2fc0] * Erratum HSE43 * CONFIG_TDP_NOMINAL CSR Implemented at Incorrect Offset - * http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-spec-update.html + * https://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-spec-update.html * * Devices [8086:6f60,6fa0,6fc0] * Erratum BDF2 * PCI BARs in the Home Agent Will Return Non-Zero Values During Enumeration - * http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v4-spec-update.html + * https://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v4-spec-update.html */ static void pci_invalid_bar(struct pci_dev *dev) { @@ -572,6 +572,10 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2fc0, pci_invalid_bar); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6f60, pci_invalid_bar); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_invalid_bar); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_invalid_bar); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0xa1ec, pci_invalid_bar); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0xa1ed, pci_invalid_bar); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0xa26c, pci_invalid_bar); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0xa26d, pci_invalid_bar); /* * Device [1022:7808] @@ -583,7 +587,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_invalid_bar); static void pci_fixup_amd_ehci_pme(struct pci_dev *dev) { dev_info(&dev->dev, "PME# does not work under D3, disabling it\n"); - dev->pme_support &= ~((PCI_PM_CAP_PME_D3 | PCI_PM_CAP_PME_D3cold) + dev->pme_support &= ~((PCI_PM_CAP_PME_D3hot | PCI_PM_CAP_PME_D3cold) >> PCI_PM_CAP_PME_SHIFT); } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x7808, pci_fixup_amd_ehci_pme); @@ -775,4 +779,48 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, 0x1571, pci_amd_enable_64bit_bar); DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, 0x15b1, pci_amd_enable_64bit_bar); DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, 0x1601, pci_amd_enable_64bit_bar); +#define RS690_LOWER_TOP_OF_DRAM2 0x30 +#define RS690_LOWER_TOP_OF_DRAM2_VALID 0x1 +#define RS690_UPPER_TOP_OF_DRAM2 0x31 +#define RS690_HTIU_NB_INDEX 0xA8 +#define RS690_HTIU_NB_INDEX_WR_ENABLE 0x100 +#define RS690_HTIU_NB_DATA 0xAC + +/* + * Some BIOS implementations support RAM above 4GB, but do not configure the + * PCI host to respond to bus master accesses for these addresses. These + * implementations set the TOP_OF_DRAM_SLOT1 register correctly, so PCI DMA + * works as expected for addresses below 4GB. + * + * Reference: "AMD RS690 ASIC Family Register Reference Guide" (pg. 2-57) + * https://www.amd.com/system/files/TechDocs/43372_rs690_rrg_3.00o.pdf + */ +static void rs690_fix_64bit_dma(struct pci_dev *pdev) +{ + u32 val = 0; + phys_addr_t top_of_dram = __pa(high_memory - 1) + 1; + + if (top_of_dram <= (1ULL << 32)) + return; + + pci_write_config_dword(pdev, RS690_HTIU_NB_INDEX, + RS690_LOWER_TOP_OF_DRAM2); + pci_read_config_dword(pdev, RS690_HTIU_NB_DATA, &val); + + if (val) + return; + + pci_info(pdev, "Adjusting top of DRAM to %pa for 64-bit DMA support\n", &top_of_dram); + + pci_write_config_dword(pdev, RS690_HTIU_NB_INDEX, + RS690_UPPER_TOP_OF_DRAM2 | RS690_HTIU_NB_INDEX_WR_ENABLE); + pci_write_config_dword(pdev, RS690_HTIU_NB_DATA, top_of_dram >> 32); + + pci_write_config_dword(pdev, RS690_HTIU_NB_INDEX, + RS690_LOWER_TOP_OF_DRAM2 | RS690_HTIU_NB_INDEX_WR_ENABLE); + pci_write_config_dword(pdev, RS690_HTIU_NB_DATA, + top_of_dram | RS690_LOWER_TOP_OF_DRAM2_VALID); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7910, rs690_fix_64bit_dma); + #endif |