diff options
Diffstat (limited to 'arch')
1392 files changed, 47592 insertions, 18340 deletions
diff --git a/arch/Kconfig b/arch/Kconfig index 8bcc1c746142..48b5e103bdb0 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -72,11 +72,11 @@ config KPROBES If in doubt, say "N". config JUMP_LABEL - bool "Optimize very unlikely/likely branches" - depends on HAVE_ARCH_JUMP_LABEL - depends on CC_HAS_ASM_GOTO - help - This option enables a transparent branch optimization that + bool "Optimize very unlikely/likely branches" + depends on HAVE_ARCH_JUMP_LABEL + depends on CC_HAS_ASM_GOTO + help + This option enables a transparent branch optimization that makes certain almost-always-true or almost-always-false branch conditions even cheaper to execute within the kernel. @@ -84,7 +84,7 @@ config JUMP_LABEL scheduler functionality, networking code and KVM have such branches and include support for this optimization technique. - If it is detected that the compiler has support for "asm goto", + If it is detected that the compiler has support for "asm goto", the kernel will compile such branches with just a nop instruction. When the condition flag is toggled to true, the nop will be converted to a jump instruction to execute the @@ -151,8 +151,8 @@ config HAVE_EFFICIENT_UNALIGNED_ACCESS information on the topic of unaligned memory accesses. config ARCH_USE_BUILTIN_BSWAP - bool - help + bool + help Modern versions of GCC (since 4.4) have builtin functions for handling byte-swapping. Using these, instead of the old inline assembler that the architecture code provides in the @@ -221,10 +221,10 @@ config HAVE_DMA_CONTIGUOUS bool config GENERIC_SMP_IDLE_THREAD - bool + bool config GENERIC_IDLE_POLL_SETUP - bool + bool config ARCH_HAS_FORTIFY_SOURCE bool @@ -257,7 +257,7 @@ config ARCH_HAS_UNCACHED_SEGMENT # Select if arch init_task must go in the __init_task_data section config ARCH_TASK_STRUCT_ON_STACK - bool + bool # Select if arch has its private alloc_task_struct() function config ARCH_TASK_STRUCT_ALLOCATOR @@ -796,16 +796,9 @@ config OLD_SIGACTION config COMPAT_OLD_SIGACTION bool -config 64BIT_TIME - def_bool y - help - This should be selected by all architectures that need to support - new system calls with a 64-bit time_t. This is relevant on all 32-bit - architectures, and 64-bit architectures as part of compat syscall - handling. - config COMPAT_32BIT_TIME - def_bool !64BIT || COMPAT + bool "Provide system calls for 32-bit time_t" + default !64BIT || COMPAT help This enables 32 bit time_t support in addition to 64 bit time_t support. This is relevant on all 32-bit architectures, and 64-bit architectures @@ -843,16 +836,17 @@ config HAVE_ARCH_VMAP_STACK config VMAP_STACK default y bool "Use a virtually-mapped stack" - depends on HAVE_ARCH_VMAP_STACK && !KASAN + depends on HAVE_ARCH_VMAP_STACK + depends on !KASAN || KASAN_VMALLOC ---help--- Enable this if you want the use virtually-mapped kernel stacks with guard pages. This causes kernel stack overflows to be caught immediately rather than causing difficult-to-diagnose corruption. - This is presently incompatible with KASAN because KASAN expects - the stack to map directly to the KASAN shadow map using a formula - that is incorrect if the stack is in vmalloc space. + To use this with KASAN, the architecture must support backing + virtual mappings with real shadow memory, and KASAN_VMALLOC must + be enabled. config ARCH_OPTIONAL_KERNEL_RWX def_bool n @@ -939,6 +933,14 @@ config RELR config ARCH_HAS_MEM_ENCRYPT bool +config HAVE_SPARSE_SYSCALL_NR + bool + help + An architecture should select this if its syscall numbering is sparse + to save space. For example, MIPS architecture has a syscall array with + entries at 4000, 5000 and 6000 locations. This option turns on syscall + related optimizations for a given architecture. + source "kernel/gcov/Kconfig" source "scripts/gcc-plugins/Kconfig" diff --git a/arch/alpha/include/asm/io.h b/arch/alpha/include/asm/io.h index af2c0063dc75..1989b946a28d 100644 --- a/arch/alpha/include/asm/io.h +++ b/arch/alpha/include/asm/io.h @@ -283,12 +283,6 @@ static inline void __iomem *ioremap(unsigned long port, unsigned long size) return IO_CONCAT(__IO_PREFIX,ioremap) (port, size); } -static inline void __iomem *__ioremap(unsigned long port, unsigned long size, - unsigned long flags) -{ - return ioremap(port, size); -} - static inline void __iomem * ioremap_nocache(unsigned long offset, unsigned long size) { diff --git a/arch/alpha/include/asm/mmzone.h b/arch/alpha/include/asm/mmzone.h index 889b5d3ad825..7ee144f484f1 100644 --- a/arch/alpha/include/asm/mmzone.h +++ b/arch/alpha/include/asm/mmzone.h @@ -73,7 +73,6 @@ PLAT_NODE_DATA_LOCALNR(unsigned long p, int n) #define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) #define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> 32)) -#define pgd_page(pgd) (pfn_to_page(pgd_val(pgd) >> 32)) #define pte_pfn(pte) (pte_val(pte) >> 32) #define mk_pte(page, pgprot) \ diff --git a/arch/alpha/include/asm/pgalloc.h b/arch/alpha/include/asm/pgalloc.h index eb91f1e85629..a1a29f60934c 100644 --- a/arch/alpha/include/asm/pgalloc.h +++ b/arch/alpha/include/asm/pgalloc.h @@ -27,9 +27,9 @@ pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte) } static inline void -pgd_populate(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmd) +pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) { - pgd_set(pgd, pmd); + pud_set(pud, pmd); } extern pgd_t *pgd_alloc(struct mm_struct *mm); diff --git a/arch/alpha/include/asm/pgtable.h b/arch/alpha/include/asm/pgtable.h index 065b57f408c3..299791ce14b6 100644 --- a/arch/alpha/include/asm/pgtable.h +++ b/arch/alpha/include/asm/pgtable.h @@ -2,7 +2,7 @@ #ifndef _ALPHA_PGTABLE_H #define _ALPHA_PGTABLE_H -#include <asm-generic/4level-fixup.h> +#include <asm-generic/pgtable-nopud.h> /* * This file contains the functions and defines necessary to modify and use @@ -226,8 +226,8 @@ extern inline pte_t pte_modify(pte_t pte, pgprot_t newprot) extern inline void pmd_set(pmd_t * pmdp, pte_t * ptep) { pmd_val(*pmdp) = _PAGE_TABLE | ((((unsigned long) ptep) - PAGE_OFFSET) << (32-PAGE_SHIFT)); } -extern inline void pgd_set(pgd_t * pgdp, pmd_t * pmdp) -{ pgd_val(*pgdp) = _PAGE_TABLE | ((((unsigned long) pmdp) - PAGE_OFFSET) << (32-PAGE_SHIFT)); } +extern inline void pud_set(pud_t * pudp, pmd_t * pmdp) +{ pud_val(*pudp) = _PAGE_TABLE | ((((unsigned long) pmdp) - PAGE_OFFSET) << (32-PAGE_SHIFT)); } extern inline unsigned long @@ -238,11 +238,11 @@ pmd_page_vaddr(pmd_t pmd) #ifndef CONFIG_DISCONTIGMEM #define pmd_page(pmd) (mem_map + ((pmd_val(pmd) & _PFN_MASK) >> 32)) -#define pgd_page(pgd) (mem_map + ((pgd_val(pgd) & _PFN_MASK) >> 32)) +#define pud_page(pud) (mem_map + ((pud_val(pud) & _PFN_MASK) >> 32)) #endif -extern inline unsigned long pgd_page_vaddr(pgd_t pgd) -{ return PAGE_OFFSET + ((pgd_val(pgd) & _PFN_MASK) >> (32-PAGE_SHIFT)); } +extern inline unsigned long pud_page_vaddr(pud_t pgd) +{ return PAGE_OFFSET + ((pud_val(pgd) & _PFN_MASK) >> (32-PAGE_SHIFT)); } extern inline int pte_none(pte_t pte) { return !pte_val(pte); } extern inline int pte_present(pte_t pte) { return pte_val(pte) & _PAGE_VALID; } @@ -256,10 +256,10 @@ extern inline int pmd_bad(pmd_t pmd) { return (pmd_val(pmd) & ~_PFN_MASK) != _P extern inline int pmd_present(pmd_t pmd) { return pmd_val(pmd) & _PAGE_VALID; } extern inline void pmd_clear(pmd_t * pmdp) { pmd_val(*pmdp) = 0; } -extern inline int pgd_none(pgd_t pgd) { return !pgd_val(pgd); } -extern inline int pgd_bad(pgd_t pgd) { return (pgd_val(pgd) & ~_PFN_MASK) != _PAGE_TABLE; } -extern inline int pgd_present(pgd_t pgd) { return pgd_val(pgd) & _PAGE_VALID; } -extern inline void pgd_clear(pgd_t * pgdp) { pgd_val(*pgdp) = 0; } +extern inline int pud_none(pud_t pud) { return !pud_val(pud); } +extern inline int pud_bad(pud_t pud) { return (pud_val(pud) & ~_PFN_MASK) != _PAGE_TABLE; } +extern inline int pud_present(pud_t pud) { return pud_val(pud) & _PAGE_VALID; } +extern inline void pud_clear(pud_t * pudp) { pud_val(*pudp) = 0; } /* * The following only work if pte_present() is true. @@ -301,9 +301,9 @@ extern inline pte_t pte_mkspecial(pte_t pte) { return pte; } */ /* Find an entry in the second-level page table.. */ -extern inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address) +extern inline pmd_t * pmd_offset(pud_t * dir, unsigned long address) { - pmd_t *ret = (pmd_t *) pgd_page_vaddr(*dir) + ((address >> PMD_SHIFT) & (PTRS_PER_PAGE - 1)); + pmd_t *ret = (pmd_t *) pud_page_vaddr(*dir) + ((address >> PMD_SHIFT) & (PTRS_PER_PAGE - 1)); smp_read_barrier_depends(); /* see above */ return ret; } diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index bf497b8b0ec6..94e4cde8071a 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -963,7 +963,7 @@ put_tv32(struct timeval32 __user *o, struct timespec64 *i) } static inline long -put_tv_to_tv32(struct timeval32 __user *o, struct timeval *i) +put_tv_to_tv32(struct timeval32 __user *o, struct __kernel_old_timeval *i) { return copy_to_user(o, &(struct timeval32){ .tv_sec = i->tv_sec, @@ -971,30 +971,6 @@ put_tv_to_tv32(struct timeval32 __user *o, struct timeval *i) sizeof(struct timeval32)); } -static inline long -get_it32(struct itimerval *o, struct itimerval32 __user *i) -{ - struct itimerval32 itv; - if (copy_from_user(&itv, i, sizeof(struct itimerval32))) - return -EFAULT; - o->it_interval.tv_sec = itv.it_interval.tv_sec; - o->it_interval.tv_usec = itv.it_interval.tv_usec; - o->it_value.tv_sec = itv.it_value.tv_sec; - o->it_value.tv_usec = itv.it_value.tv_usec; - return 0; -} - -static inline long -put_it32(struct itimerval32 __user *o, struct itimerval *i) -{ - return copy_to_user(o, &(struct itimerval32){ - .it_interval.tv_sec = o->it_interval.tv_sec, - .it_interval.tv_usec = o->it_interval.tv_usec, - .it_value.tv_sec = o->it_value.tv_sec, - .it_value.tv_usec = o->it_value.tv_usec}, - sizeof(struct itimerval32)); -} - static inline void jiffies_to_timeval32(unsigned long jiffies, struct timeval32 *value) { @@ -1039,47 +1015,6 @@ SYSCALL_DEFINE2(osf_settimeofday, struct timeval32 __user *, tv, asmlinkage long sys_ni_posix_timers(void); -SYSCALL_DEFINE2(osf_getitimer, int, which, struct itimerval32 __user *, it) -{ - struct itimerval kit; - int error; - - if (!IS_ENABLED(CONFIG_POSIX_TIMERS)) - return sys_ni_posix_timers(); - - error = do_getitimer(which, &kit); - if (!error && put_it32(it, &kit)) - error = -EFAULT; - - return error; -} - -SYSCALL_DEFINE3(osf_setitimer, int, which, struct itimerval32 __user *, in, - struct itimerval32 __user *, out) -{ - struct itimerval kin, kout; - int error; - - if (!IS_ENABLED(CONFIG_POSIX_TIMERS)) - return sys_ni_posix_timers(); - - if (in) { - if (get_it32(&kin, in)) - return -EFAULT; - } else - memset(&kin, 0, sizeof(kin)); - - error = do_setitimer(which, &kin, out ? &kout : NULL); - if (error || !out) - return error; - - if (put_it32(out, &kout)) - return -EFAULT; - - return 0; - -} - SYSCALL_DEFINE2(osf_utimes, const char __user *, filename, struct timeval32 __user *, tvs) { diff --git a/arch/alpha/kernel/pci-sysfs.c b/arch/alpha/kernel/pci-sysfs.c index f94c732fedeb..0021580d79ad 100644 --- a/arch/alpha/kernel/pci-sysfs.c +++ b/arch/alpha/kernel/pci-sysfs.c @@ -71,10 +71,10 @@ static int pci_mmap_resource(struct kobject *kobj, struct pci_bus_region bar; int i; - for (i = 0; i < PCI_ROM_RESOURCE; i++) + for (i = 0; i < PCI_STD_NUM_BARS; i++) if (res == &pdev->resource[i]) break; - if (i >= PCI_ROM_RESOURCE) + if (i >= PCI_STD_NUM_BARS) return -ENODEV; if (res->flags & IORESOURCE_MEM && iomem_is_exclusive(res->start)) @@ -115,7 +115,7 @@ void pci_remove_resource_files(struct pci_dev *pdev) { int i; - for (i = 0; i < PCI_ROM_RESOURCE; i++) { + for (i = 0; i < PCI_STD_NUM_BARS; i++) { struct bin_attribute *res_attr; res_attr = pdev->res_attr[i]; @@ -232,7 +232,7 @@ int pci_create_resource_files(struct pci_dev *pdev) int retval; /* Expose the PCI resources from this device as files */ - for (i = 0; i < PCI_ROM_RESOURCE; i++) { + for (i = 0; i < PCI_STD_NUM_BARS; i++) { /* skip empty resources */ if (!pci_resource_len(pdev, i)) diff --git a/arch/alpha/kernel/syscalls/syscall.tbl b/arch/alpha/kernel/syscalls/syscall.tbl index 728fe028c02c..8e13b0b2928d 100644 --- a/arch/alpha/kernel/syscalls/syscall.tbl +++ b/arch/alpha/kernel/syscalls/syscall.tbl @@ -89,10 +89,10 @@ 80 common setgroups sys_setgroups 81 common osf_old_getpgrp sys_ni_syscall 82 common setpgrp sys_setpgid -83 common osf_setitimer sys_osf_setitimer +83 common osf_setitimer compat_sys_setitimer 84 common osf_old_wait sys_ni_syscall 85 common osf_table sys_ni_syscall -86 common osf_getitimer sys_osf_getitimer +86 common osf_getitimer compat_sys_getitimer 87 common gethostname sys_gethostname 88 common sethostname sys_sethostname 89 common getdtablesize sys_getdtablesize diff --git a/arch/alpha/mm/init.c b/arch/alpha/mm/init.c index e2cbec3789e8..12e218d3792a 100644 --- a/arch/alpha/mm/init.c +++ b/arch/alpha/mm/init.c @@ -146,6 +146,8 @@ callback_init(void * kernel_end) { struct crb_struct * crb; pgd_t *pgd; + p4d_t *p4d; + pud_t *pud; pmd_t *pmd; void *two_pages; @@ -184,8 +186,10 @@ callback_init(void * kernel_end) memset(two_pages, 0, 2*PAGE_SIZE); pgd = pgd_offset_k(VMALLOC_START); - pgd_set(pgd, (pmd_t *)two_pages); - pmd = pmd_offset(pgd, VMALLOC_START); + p4d = p4d_offset(pgd, VMALLOC_START); + pud = pud_offset(p4d, VMALLOC_START); + pud_set(pud, (pmd_t *)two_pages); + pmd = pmd_offset(pud, VMALLOC_START); pmd_set(pmd, (pte_t *)(two_pages + PAGE_SIZE)); if (alpha_using_srm) { @@ -214,9 +218,9 @@ callback_init(void * kernel_end) /* Newer consoles (especially on larger systems) may require more pages of PTEs. Grab additional pages as needed. */ - if (pmd != pmd_offset(pgd, vaddr)) { + if (pmd != pmd_offset(pud, vaddr)) { memset(kernel_end, 0, PAGE_SIZE); - pmd = pmd_offset(pgd, vaddr); + pmd = pmd_offset(pud, vaddr); pmd_set(pmd, (pte_t *)kernel_end); kernel_end += PAGE_SIZE; } diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index 8383155c8c82..26108ea785c2 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -6,7 +6,6 @@ config ARC def_bool y select ARC_TIMERS - select ARCH_HAS_DMA_COHERENT_TO_PFN select ARCH_HAS_DMA_PREP_COHERENT select ARCH_HAS_PTE_SPECIAL select ARCH_HAS_SETUP_DMA_OPS @@ -30,6 +29,7 @@ config ARC select HAVE_ARCH_KGDB select HAVE_ARCH_TRACEHOOK select HAVE_DEBUG_STACKOVERFLOW + select HAVE_DEBUG_KMEMLEAK select HAVE_FUTEX_CMPXCHG if FUTEX select HAVE_IOREMAP_PROT select HAVE_KERNEL_GZIP @@ -46,6 +46,7 @@ config ARC select OF_EARLY_FLATTREE select PCI_SYSCALL if PCI select PERF_USE_VMALLOC if ARC_CACHE_VIPT_ALIASING + select HAVE_ARCH_JUMP_LABEL if ISA_ARCV2 && !CPU_ENDIAN_BE32 config ARCH_HAS_CACHE_LINE_SIZE def_bool y @@ -525,6 +526,13 @@ config ARC_DW2_UNWIND config ARC_DBG_TLB_PARANOIA bool "Paranoia Checks in Low Level TLB Handlers" +config ARC_DBG_JUMP_LABEL + bool "Paranoid checks in Static Keys (jump labels) code" + depends on JUMP_LABEL + default y if STATIC_KEYS_SELFTEST + help + Enable paranoid checks and self-test of both ARC-specific and generic + part of static keys (jump labels) related code. endif config ARC_BUILTIN_DTB_NAME diff --git a/arch/arc/Makefile b/arch/arc/Makefile index f1c44cccf8d6..20e9ab6cc521 100644 --- a/arch/arc/Makefile +++ b/arch/arc/Makefile @@ -3,7 +3,7 @@ # Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) # -KBUILD_DEFCONFIG := nsim_hs_defconfig +KBUILD_DEFCONFIG := haps_hs_smp_defconfig ifeq ($(CROSS_COMPILE),) CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux-) diff --git a/arch/arc/boot/dts/axc001.dtsi b/arch/arc/boot/dts/axc001.dtsi index 6ec1fcdfc0d7..79ec27c043c1 100644 --- a/arch/arc/boot/dts/axc001.dtsi +++ b/arch/arc/boot/dts/axc001.dtsi @@ -28,6 +28,12 @@ clock-frequency = <750000000>; }; + input_clk: input-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <33333333>; + }; + core_intc: arc700-intc@cpu { compatible = "snps,arc700-intc"; interrupt-controller; diff --git a/arch/arc/boot/dts/axs101.dts b/arch/arc/boot/dts/axs101.dts index 305a7f9658e0..c4cfc5f4f427 100644 --- a/arch/arc/boot/dts/axs101.dts +++ b/arch/arc/boot/dts/axs101.dts @@ -14,6 +14,6 @@ compatible = "snps,axs101", "snps,arc-sdp"; chosen { - bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0 video=1280x720@60 print-fatal-signals=1"; + bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0 print-fatal-signals=1"; }; }; diff --git a/arch/arc/boot/dts/axs103_idu.dts b/arch/arc/boot/dts/axs103_idu.dts index 46c9136cbf2b..a934b92a8c30 100644 --- a/arch/arc/boot/dts/axs103_idu.dts +++ b/arch/arc/boot/dts/axs103_idu.dts @@ -17,6 +17,6 @@ compatible = "snps,axs103", "snps,arc-sdp"; chosen { - bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 print-fatal-signals=1 consoleblank=0 video=1280x720@60"; + bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 print-fatal-signals=1 consoleblank=0"; }; }; diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi index 08bcfed6b80f..f9a5c9ddcae7 100644 --- a/arch/arc/boot/dts/axs10x_mb.dtsi +++ b/arch/arc/boot/dts/axs10x_mb.dtsi @@ -61,12 +61,13 @@ clock-frequency = <25000000>; #clock-cells = <0>; }; + }; - pguclk: pguclk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <74250000>; - }; + pguclk: pguclk@10080 { + compatible = "snps,axs10x-pgu-pll-clock"; + reg = <0x10080 0x10>, <0x110 0x10>; + #clock-cells = <0>; + clocks = <&input_clk>; }; gmac: ethernet@18000 { diff --git a/arch/arc/boot/dts/haps_hs.dts b/arch/arc/boot/dts/haps_hs.dts index 44bc522fdec8..60d578e2781f 100644 --- a/arch/arc/boot/dts/haps_hs.dts +++ b/arch/arc/boot/dts/haps_hs.dts @@ -9,13 +9,15 @@ / { model = "snps,zebu_hs"; compatible = "snps,zebu_hs"; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; interrupt-parent = <&core_intc>; memory { device_type = "memory"; - reg = <0x80000000 0x20000000>; /* 512 */ + /* CONFIG_LINUX_RAM_BASE needs to match low mem start */ + reg = <0x0 0x80000000 0x0 0x20000000 /* 512 MB low mem */ + 0x1 0x00000000 0x0 0x40000000>; /* 1 GB highmem */ }; chosen { @@ -31,8 +33,9 @@ #address-cells = <1>; #size-cells = <1>; - /* child and parent address space 1:1 mapped */ - ranges; + /* only perip space at end of low mem accessible + bus addr, parent bus addr, size */ + ranges = <0x80000000 0x0 0x80000000 0x80000000>; core_clk: core_clk { #clock-cells = <0>; @@ -47,7 +50,7 @@ }; uart0: serial@f0000000 { - compatible = "ns8250"; + compatible = "ns16550a"; reg = <0xf0000000 0x2000>; interrupts = <24>; clock-frequency = <50000000>; diff --git a/arch/arc/boot/dts/haps_hs_idu.dts b/arch/arc/boot/dts/haps_hs_idu.dts index 4d6971cf5f9f..738c76cd07b3 100644 --- a/arch/arc/boot/dts/haps_hs_idu.dts +++ b/arch/arc/boot/dts/haps_hs_idu.dts @@ -54,7 +54,6 @@ }; uart0: serial@f0000000 { - /* compatible = "ns8250"; Doesn't use FIFOs */ compatible = "ns16550a"; reg = <0xf0000000 0x2000>; interrupt-parent = <&idu_intc>; diff --git a/arch/arc/boot/dts/nsim_700.dts b/arch/arc/boot/dts/nsim_700.dts index 63dbaab1247d..f8832a15e174 100644 --- a/arch/arc/boot/dts/nsim_700.dts +++ b/arch/arc/boot/dts/nsim_700.dts @@ -14,11 +14,11 @@ interrupt-parent = <&core_intc>; chosen { - bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8 print-fatal-signals=1"; + bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=ttyS0,115200n8 print-fatal-signals=1"; }; aliases { - serial0 = &arcuart0; + serial0 = &uart0; }; fpga { @@ -41,29 +41,15 @@ #interrupt-cells = <1>; }; - arcuart0: serial@c0fc1000 { - compatible = "snps,arc-uart"; - reg = <0xc0fc1000 0x100>; - interrupts = <5>; - clock-frequency = <80000000>; - current-speed = <115200>; - status = "okay"; - }; - - ethernet@c0fc2000 { - compatible = "snps,arc-emac"; - reg = <0xc0fc2000 0x3c>; - interrupts = <6>; - mac-address = [ 00 11 22 33 44 55 ]; - clock-frequency = <80000000>; - max-speed = <100>; - phy = <&phy0>; - - #address-cells = <1>; - #size-cells = <0>; - phy0: ethernet-phy@0 { - reg = <1>; - }; + uart0: serial@f0000000 { + compatible = "ns16550a"; + reg = <0xf0000000 0x2000>; + interrupts = <24>; + clock-frequency = <50000000>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + no-loopback-test = <1>; }; arcpct0: pct { diff --git a/arch/arc/boot/dts/nsim_hs.dts b/arch/arc/boot/dts/nsim_hs.dts deleted file mode 100644 index 851798a5f4e3..000000000000 --- a/arch/arc/boot/dts/nsim_hs.dts +++ /dev/null @@ -1,67 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) - */ -/dts-v1/; - -/include/ "skeleton_hs.dtsi" - -/ { - model = "snps,nsim_hs"; - compatible = "snps,nsim_hs"; - #address-cells = <2>; - #size-cells = <2>; - interrupt-parent = <&core_intc>; - - memory { - device_type = "memory"; - /* CONFIG_LINUX_RAM_BASE needs to match low mem start */ - reg = <0x0 0x80000000 0x0 0x20000000 /* 512 MB low mem */ - 0x1 0x00000000 0x0 0x40000000>; /* 1 GB highmem */ - }; - - chosen { - bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8 print-fatal-signals=1"; - }; - - aliases { - serial0 = &arcuart0; - }; - - fpga { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - - /* only perip space at end of low mem accessible - bus addr, parent bus addr, size */ - ranges = <0x80000000 0x0 0x80000000 0x80000000>; - - core_clk: core_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <80000000>; - }; - - core_intc: core-interrupt-controller { - compatible = "snps,archs-intc"; - interrupt-controller; - #interrupt-cells = <1>; - }; - - arcuart0: serial@c0fc1000 { - compatible = "snps,arc-uart"; - reg = <0xc0fc1000 0x100>; - interrupts = <24>; - clock-frequency = <80000000>; - current-speed = <115200>; - status = "okay"; - }; - - arcpct0: pct { - compatible = "snps,archs-pct"; - #interrupt-cells = <1>; - interrupts = <20>; - }; - }; -}; diff --git a/arch/arc/boot/dts/nsim_hs_idu.dts b/arch/arc/boot/dts/nsim_hs_idu.dts deleted file mode 100644 index 6c559a0bd1f5..000000000000 --- a/arch/arc/boot/dts/nsim_hs_idu.dts +++ /dev/null @@ -1,65 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) - */ -/dts-v1/; - -/include/ "skeleton_hs_idu.dtsi" - -/ { - model = "snps,nsim_hs-smp"; - compatible = "snps,nsim_hs"; - interrupt-parent = <&core_intc>; - - chosen { - bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8 print-fatal-signals=1"; - }; - - aliases { - serial0 = &arcuart0; - }; - - fpga { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - - /* child and parent address space 1:1 mapped */ - ranges; - - core_clk: core_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <80000000>; - }; - - core_intc: core-interrupt-controller { - compatible = "snps,archs-intc"; - interrupt-controller; - #interrupt-cells = <1>; - }; - - idu_intc: idu-interrupt-controller { - compatible = "snps,archs-idu-intc"; - interrupt-controller; - interrupt-parent = <&core_intc>; - #interrupt-cells = <1>; - }; - - arcuart0: serial@c0fc1000 { - compatible = "snps,arc-uart"; - reg = <0xc0fc1000 0x100>; - interrupt-parent = <&idu_intc>; - interrupts = <0>; - clock-frequency = <80000000>; - current-speed = <115200>; - status = "okay"; - }; - - arcpct0: pct { - compatible = "snps,archs-pct"; - #interrupt-cells = <1>; - interrupts = <20>; - }; - }; -}; diff --git a/arch/arc/configs/haps_hs_defconfig b/arch/arc/configs/haps_hs_defconfig index 47ff8a97e42d..7337cdf4ffdd 100644 --- a/arch/arc/configs/haps_hs_defconfig +++ b/arch/arc/configs/haps_hs_defconfig @@ -4,6 +4,7 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_CROSS_MEMORY_ATTACH is not set CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_NAMESPACES=y @@ -15,13 +16,9 @@ CONFIG_EXPERT=y CONFIG_PERF_EVENTS=y # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y +CONFIG_ARC_BUILTIN_DTB_NAME="haps_hs" CONFIG_MODULES=y # CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ISA_ARCV2=y -CONFIG_ARC_BUILTIN_DTB_NAME="haps_hs" -CONFIG_PREEMPT=y # CONFIG_COMPACTION is not set CONFIG_NET=y CONFIG_PACKET=y @@ -30,9 +27,6 @@ CONFIG_UNIX=y CONFIG_UNIX_DIAG=y CONFIG_NET_KEY=y CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set # CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y @@ -42,21 +36,12 @@ CONFIG_DEVTMPFS_MOUNT=y CONFIG_VIRTIO_BLK=y CONFIG_NETDEVICES=y CONFIG_VIRTIO_NET=y -# CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_VENDOR_BROADCOM is not set -# CONFIG_NET_VENDOR_INTEL is not set -# CONFIG_NET_VENDOR_MARVELL is not set -# CONFIG_NET_VENDOR_MICREL is not set -# CONFIG_NET_VENDOR_NATSEMI is not set -# CONFIG_NET_VENDOR_SEEQ is not set -# CONFIG_NET_VENDOR_STMICRO is not set -# CONFIG_NET_VENDOR_VIA is not set -# CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_ETHERNET is not set # CONFIG_WLAN is not set CONFIG_INPUT_EVDEV=y -CONFIG_MOUSE_PS2_TOUCHKIT=y -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIO_ARC_PS2=y +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y @@ -66,9 +51,6 @@ CONFIG_SERIAL_8250_DW=y CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set -CONFIG_FB=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y # CONFIG_HID is not set # CONFIG_USB_SUPPORT is not set CONFIG_VIRTIO_MMIO=y diff --git a/arch/arc/configs/haps_hs_smp_defconfig b/arch/arc/configs/haps_hs_smp_defconfig index 9685fd5f57a4..bc927221afc0 100644 --- a/arch/arc/configs/haps_hs_smp_defconfig +++ b/arch/arc/configs/haps_hs_smp_defconfig @@ -4,6 +4,7 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_CROSS_MEMORY_ATTACH is not set CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_NAMESPACES=y @@ -16,15 +17,11 @@ CONFIG_PERF_EVENTS=y # CONFIG_VM_EVENT_COUNTERS is not set # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y +CONFIG_SMP=y +CONFIG_ARC_BUILTIN_DTB_NAME="haps_hs_idu" CONFIG_KPROBES=y CONFIG_MODULES=y # CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ISA_ARCV2=y -CONFIG_SMP=y -CONFIG_ARC_BUILTIN_DTB_NAME="haps_hs_idu" -CONFIG_PREEMPT=y # CONFIG_COMPACTION is not set CONFIG_NET=y CONFIG_PACKET=y @@ -33,9 +30,6 @@ CONFIG_UNIX=y CONFIG_UNIX_DIAG=y CONFIG_NET_KEY=y CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set # CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y @@ -43,21 +37,12 @@ CONFIG_DEVTMPFS=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_BLK_DEV is not set CONFIG_NETDEVICES=y -# CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_VENDOR_BROADCOM is not set -# CONFIG_NET_VENDOR_INTEL is not set -# CONFIG_NET_VENDOR_MARVELL is not set -# CONFIG_NET_VENDOR_MICREL is not set -# CONFIG_NET_VENDOR_NATSEMI is not set -# CONFIG_NET_VENDOR_SEEQ is not set -# CONFIG_NET_VENDOR_STMICRO is not set -# CONFIG_NET_VENDOR_VIA is not set -# CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_ETHERNET is not set # CONFIG_WLAN is not set CONFIG_INPUT_EVDEV=y -CONFIG_MOUSE_PS2_TOUCHKIT=y -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIO_ARC_PS2=y +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y @@ -67,9 +52,6 @@ CONFIG_SERIAL_8250_DW=y CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set -CONFIG_FB=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y # CONFIG_HID is not set # CONFIG_USB_SUPPORT is not set # CONFIG_IOMMU_SUPPORT is not set diff --git a/arch/arc/configs/nps_defconfig b/arch/arc/configs/nps_defconfig index 5978d4d7d5b0..07f26ed39f02 100644 --- a/arch/arc/configs/nps_defconfig +++ b/arch/arc/configs/nps_defconfig @@ -7,7 +7,6 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_BLK_DEV_INITRD=y CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y -CONFIG_SYSCTL_SYSCALL=y # CONFIG_EPOLL is not set # CONFIG_SIGNALFD is not set # CONFIG_TIMERFD is not set diff --git a/arch/arc/configs/nsim_700_defconfig b/arch/arc/configs/nsim_700_defconfig index 2b9b11474640..326f6cde7826 100644 --- a/arch/arc/configs/nsim_700_defconfig +++ b/arch/arc/configs/nsim_700_defconfig @@ -4,6 +4,7 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_CROSS_MEMORY_ATTACH is not set CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_NAMESPACES=y @@ -17,13 +18,10 @@ CONFIG_PERF_EVENTS=y # CONFIG_SLUB_DEBUG is not set # CONFIG_COMPAT_BRK is not set CONFIG_ISA_ARCOMPACT=y +CONFIG_ARC_BUILTIN_DTB_NAME="nsim_700" CONFIG_KPROBES=y CONFIG_MODULES=y # CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARC_BUILTIN_DTB_NAME="nsim_700" -CONFIG_PREEMPT=y # CONFIG_COMPACTION is not set CONFIG_NET=y CONFIG_PACKET=y @@ -37,15 +35,18 @@ CONFIG_DEVTMPFS=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_BLK_DEV is not set CONFIG_NETDEVICES=y -CONFIG_ARC_EMAC=y -CONFIG_LXT_PHY=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +# CONFIG_ETHERNET is not set +# CONFIG_WLAN is not set # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set # CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_ARC=y -CONFIG_SERIAL_ARC_CONSOLE=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set # CONFIG_HID is not set diff --git a/arch/arc/configs/nsim_hs_defconfig b/arch/arc/configs/nsim_hs_defconfig deleted file mode 100644 index bab3dd255841..000000000000 --- a/arch/arc/configs/nsim_hs_defconfig +++ /dev/null @@ -1,60 +0,0 @@ -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_CROSS_MEMORY_ATTACH is not set -CONFIG_HIGH_RES_TIMERS=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_NAMESPACES=y -# CONFIG_UTS_NS is not set -# CONFIG_PID_NS is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y -CONFIG_KALLSYMS_ALL=y -CONFIG_EMBEDDED=y -CONFIG_PERF_EVENTS=y -# CONFIG_SLUB_DEBUG is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_KPROBES=y -CONFIG_MODULES=y -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ISA_ARCV2=y -CONFIG_ARC_BUILTIN_DTB_NAME="nsim_hs" -CONFIG_PREEMPT=y -# CONFIG_COMPACTION is not set -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_UNIX_DIAG=y -CONFIG_NET_KEY=y -CONFIG_INET=y -# CONFIG_IPV6 is not set -CONFIG_DEVTMPFS=y -# CONFIG_STANDALONE is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_BLK_DEV is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_ARC=y -CONFIG_SERIAL_ARC_CONSOLE=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_HID is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_IOMMU_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_TMPFS=y -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_NFS_FS=y -# CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_DEBUG_PREEMPT is not set diff --git a/arch/arc/configs/nsim_hs_smp_defconfig b/arch/arc/configs/nsim_hs_smp_defconfig deleted file mode 100644 index 90d2d50fb8dc..000000000000 --- a/arch/arc/configs/nsim_hs_smp_defconfig +++ /dev/null @@ -1,58 +0,0 @@ -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -# CONFIG_CROSS_MEMORY_ATTACH is not set -CONFIG_HIGH_RES_TIMERS=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_NAMESPACES=y -# CONFIG_UTS_NS is not set -# CONFIG_PID_NS is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y -CONFIG_KALLSYMS_ALL=y -CONFIG_EMBEDDED=y -CONFIG_PERF_EVENTS=y -# CONFIG_SLUB_DEBUG is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_KPROBES=y -CONFIG_MODULES=y -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ISA_ARCV2=y -CONFIG_SMP=y -CONFIG_ARC_BUILTIN_DTB_NAME="nsim_hs_idu" -CONFIG_PREEMPT=y -# CONFIG_COMPACTION is not set -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_UNIX_DIAG=y -CONFIG_NET_KEY=y -CONFIG_INET=y -# CONFIG_IPV6 is not set -CONFIG_DEVTMPFS=y -# CONFIG_STANDALONE is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_BLK_DEV is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_ARC=y -CONFIG_SERIAL_ARC_CONSOLE=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_HID is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_IOMMU_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_TMPFS=y -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_NFS_FS=y -# CONFIG_ENABLE_MUST_CHECK is not set diff --git a/arch/arc/configs/tb10x_defconfig b/arch/arc/configs/tb10x_defconfig index 3a138f8c7299..a12656ec0072 100644 --- a/arch/arc/configs/tb10x_defconfig +++ b/arch/arc/configs/tb10x_defconfig @@ -15,7 +15,6 @@ CONFIG_INITRAMFS_ROOT_UID=2100 CONFIG_INITRAMFS_ROOT_GID=501 # CONFIG_RD_GZIP is not set CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y -CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS_ALL=y # CONFIG_AIO is not set CONFIG_EMBEDDED=y diff --git a/arch/arc/include/asm/Kbuild b/arch/arc/include/asm/Kbuild index 393d4f5e1450..1b505694691e 100644 --- a/arch/arc/include/asm/Kbuild +++ b/arch/arc/include/asm/Kbuild @@ -17,7 +17,6 @@ generic-y += local64.h generic-y += mcs_spinlock.h generic-y += mm-arch-hooks.h generic-y += mmiowb.h -generic-y += msi.h generic-y += parport.h generic-y += percpu.h generic-y += preempt.h diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h index 918804c7c1a4..d8ece4292388 100644 --- a/arch/arc/include/asm/cache.h +++ b/arch/arc/include/asm/cache.h @@ -25,6 +25,8 @@ #ifndef __ASSEMBLY__ +#include <linux/build_bug.h> + /* Uncached access macros */ #define arc_read_uncached_32(ptr) \ ({ \ diff --git a/arch/arc/include/asm/entry-compact.h b/arch/arc/include/asm/entry-compact.h index 66a292335ee6..c3aa775878dc 100644 --- a/arch/arc/include/asm/entry-compact.h +++ b/arch/arc/include/asm/entry-compact.h @@ -130,7 +130,7 @@ * to be saved again on kernel mode stack, as part of pt_regs. *-------------------------------------------------------------*/ .macro PROLOG_FREEUP_REG reg, mem -#ifdef CONFIG_SMP +#ifndef ARC_USE_SCRATCH_REG sr \reg, [ARC_REG_SCRATCH_DATA0] #else st \reg, [\mem] @@ -138,7 +138,7 @@ .endm .macro PROLOG_RESTORE_REG reg, mem -#ifdef CONFIG_SMP +#ifndef ARC_USE_SCRATCH_REG lr \reg, [ARC_REG_SCRATCH_DATA0] #else ld \reg, [\mem] diff --git a/arch/arc/include/asm/io.h b/arch/arc/include/asm/io.h index 72f7929736f8..8f777d6441a5 100644 --- a/arch/arc/include/asm/io.h +++ b/arch/arc/include/asm/io.h @@ -34,10 +34,6 @@ static inline void ioport_unmap(void __iomem *addr) extern void iounmap(const void __iomem *addr); -#define ioremap_nocache(phy, sz) ioremap(phy, sz) -#define ioremap_wc(phy, sz) ioremap(phy, sz) -#define ioremap_wt(phy, sz) ioremap(phy, sz) - /* * io{read,write}{16,32}be() macros */ diff --git a/arch/arc/include/asm/jump_label.h b/arch/arc/include/asm/jump_label.h new file mode 100644 index 000000000000..9d9618079739 --- /dev/null +++ b/arch/arc/include/asm/jump_label.h @@ -0,0 +1,72 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_ARC_JUMP_LABEL_H +#define _ASM_ARC_JUMP_LABEL_H + +#ifndef __ASSEMBLY__ + +#include <linux/stringify.h> +#include <linux/types.h> + +#define JUMP_LABEL_NOP_SIZE 4 + +/* + * NOTE about '.balign 4': + * + * To make atomic update of patched instruction available we need to guarantee + * that this instruction doesn't cross L1 cache line boundary. + * + * As of today we simply align instruction which can be patched by 4 byte using + * ".balign 4" directive. In that case patched instruction is aligned with one + * 16-bit NOP_S if this is required. + * However 'align by 4' directive is much stricter than it actually required. + * It's enough that our 32-bit instruction don't cross L1 cache line boundary / + * L1 I$ fetch block boundary which can be achieved by using + * ".bundle_align_mode" assembler directive. That will save us from adding + * useless NOP_S padding in most of the cases. + * + * TODO: switch to ".bundle_align_mode" directive using whin it will be + * supported by ARC toolchain. + */ + +static __always_inline bool arch_static_branch(struct static_key *key, + bool branch) +{ + asm_volatile_goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)" \n" + "1: \n" + "nop \n" + ".pushsection __jump_table, \"aw\" \n" + ".word 1b, %l[l_yes], %c0 \n" + ".popsection \n" + : : "i" (&((char *)key)[branch]) : : l_yes); + + return false; +l_yes: + return true; +} + +static __always_inline bool arch_static_branch_jump(struct static_key *key, + bool branch) +{ + asm_volatile_goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)" \n" + "1: \n" + "b %l[l_yes] \n" + ".pushsection __jump_table, \"aw\" \n" + ".word 1b, %l[l_yes], %c0 \n" + ".popsection \n" + : : "i" (&((char *)key)[branch]) : : l_yes); + + return false; +l_yes: + return true; +} + +typedef u32 jump_label_t; + +struct jump_entry { + jump_label_t code; + jump_label_t target; + jump_label_t key; +}; + +#endif /* __ASSEMBLY__ */ +#endif diff --git a/arch/arc/include/asm/mmu.h b/arch/arc/include/asm/mmu.h index 98cadf1a09ac..26b731d32a2b 100644 --- a/arch/arc/include/asm/mmu.h +++ b/arch/arc/include/asm/mmu.h @@ -40,6 +40,10 @@ #define ARC_REG_SCRATCH_DATA0 0x46c #endif +#if defined(CONFIG_ISA_ARCV2) || !defined(CONFIG_SMP) +#define ARC_USE_SCRATCH_REG +#endif + /* Bits in MMU PID register */ #define __TLB_ENABLE (1 << 31) #define __PROG_ENABLE (1 << 30) @@ -63,6 +67,8 @@ #if (CONFIG_ARC_MMU_VER >= 2) #define TLBWriteNI 0x5 /* write JTLB without inv uTLBs */ #define TLBIVUTLB 0x6 /* explicitly inv uTLBs */ +#else +#define TLBWriteNI TLBWrite /* Not present in hardware, fallback */ #endif #if (CONFIG_ARC_MMU_VER >= 4) diff --git a/arch/arc/include/asm/mmu_context.h b/arch/arc/include/asm/mmu_context.h index 035470816be5..3a5e6a5b9ed6 100644 --- a/arch/arc/include/asm/mmu_context.h +++ b/arch/arc/include/asm/mmu_context.h @@ -144,7 +144,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, */ cpumask_set_cpu(cpu, mm_cpumask(next)); -#ifndef CONFIG_SMP +#ifdef ARC_USE_SCRATCH_REG /* PGD cached in MMU reg to avoid 3 mem lookups: task->mm->pgd */ write_aux_reg(ARC_REG_SCRATCH_DATA0, next->pgd); #endif diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h index 7addd0301c51..9019ed9f9c94 100644 --- a/arch/arc/include/asm/pgtable.h +++ b/arch/arc/include/asm/pgtable.h @@ -33,7 +33,6 @@ #define _ASM_ARC_PGTABLE_H #include <linux/bits.h> -#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopmd.h> #include <asm/page.h> #include <asm/mmu.h> /* to propagate CONFIG_ARC_MMU_VER <n> */ @@ -351,7 +350,7 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, * Thus use this macro only when you are certain that "current" is current * e.g. when dealing with signal frame setup code etc */ -#ifndef CONFIG_SMP +#ifdef ARC_USE_SCRATCH_REG #define pgd_offset_fast(mm, addr) \ ({ \ pgd_t *pgd_base = (pgd_t *) read_aux_reg(ARC_REG_SCRATCH_DATA0); \ diff --git a/arch/arc/kernel/Makefile b/arch/arc/kernel/Makefile index de6251132310..e784f5396dda 100644 --- a/arch/arc/kernel/Makefile +++ b/arch/arc/kernel/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_ARC_EMUL_UNALIGNED) += unaligned.o obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_ARC_METAWARE_HLINK) += arc_hostlink.o obj-$(CONFIG_PERF_EVENTS) += perf_event.o +obj-$(CONFIG_JUMP_LABEL) += jump_label.o obj-$(CONFIG_ARC_FPU_SAVE_RESTORE) += fpu.o CFLAGS_fpu.o += -mdpfp diff --git a/arch/arc/kernel/jump_label.c b/arch/arc/kernel/jump_label.c new file mode 100644 index 000000000000..b8600dc325b5 --- /dev/null +++ b/arch/arc/kernel/jump_label.c @@ -0,0 +1,170 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/kernel.h> +#include <linux/jump_label.h> + +#include "asm/cacheflush.h" + +#define JUMPLABEL_ERR "ARC: jump_label: ERROR: " + +/* Halt system on fatal error to make debug easier */ +#define arc_jl_fatal(format...) \ +({ \ + pr_err(JUMPLABEL_ERR format); \ + BUG(); \ +}) + +static inline u32 arc_gen_nop(void) +{ + /* 1x 32bit NOP in middle endian */ + return 0x7000264a; +} + +/* + * Atomic update of patched instruction is only available if this + * instruction doesn't cross L1 cache line boundary. You can read about + * the way we achieve this in arc/include/asm/jump_label.h + */ +static inline void instruction_align_assert(void *addr, int len) +{ + unsigned long a = (unsigned long)addr; + + if ((a >> L1_CACHE_SHIFT) != ((a + len - 1) >> L1_CACHE_SHIFT)) + arc_jl_fatal("instruction (addr %px) cross L1 cache line border", + addr); +} + +/* + * ARCv2 'Branch unconditionally' instruction: + * 00000ssssssssss1SSSSSSSSSSNRtttt + * s S[n:0] lower bits signed immediate (number is bitfield size) + * S S[m:n+1] upper bits signed immediate (number is bitfield size) + * t S[24:21] upper bits signed immediate (branch unconditionally far) + * N N <.d> delay slot mode + * R R Reserved + */ +static inline u32 arc_gen_branch(jump_label_t pc, jump_label_t target) +{ + u32 instruction_l, instruction_r; + u32 pcl = pc & GENMASK(31, 2); + u32 u_offset = target - pcl; + u32 s, S, t; + + /* + * Offset in 32-bit branch instruction must to fit into s25. + * Something is terribly broken if we get such huge offset within one + * function. + */ + if ((s32)u_offset < -16777216 || (s32)u_offset > 16777214) + arc_jl_fatal("gen branch with offset (%d) not fit in s25", + (s32)u_offset); + + /* + * All instructions are aligned by 2 bytes so we should never get offset + * here which is not 2 bytes aligned. + */ + if (u_offset & 0x1) + arc_jl_fatal("gen branch with offset (%d) unaligned to 2 bytes", + (s32)u_offset); + + s = (u_offset >> 1) & GENMASK(9, 0); + S = (u_offset >> 11) & GENMASK(9, 0); + t = (u_offset >> 21) & GENMASK(3, 0); + + /* 00000ssssssssss1 */ + instruction_l = (s << 1) | 0x1; + /* SSSSSSSSSSNRtttt */ + instruction_r = (S << 6) | t; + + return (instruction_r << 16) | (instruction_l & GENMASK(15, 0)); +} + +void arch_jump_label_transform(struct jump_entry *entry, + enum jump_label_type type) +{ + jump_label_t *instr_addr = (jump_label_t *)entry->code; + u32 instr; + + instruction_align_assert(instr_addr, JUMP_LABEL_NOP_SIZE); + + if (type == JUMP_LABEL_JMP) + instr = arc_gen_branch(entry->code, entry->target); + else + instr = arc_gen_nop(); + + WRITE_ONCE(*instr_addr, instr); + flush_icache_range(entry->code, entry->code + JUMP_LABEL_NOP_SIZE); +} + +void arch_jump_label_transform_static(struct jump_entry *entry, + enum jump_label_type type) +{ + /* + * We use only one NOP type (1x, 4 byte) in arch_static_branch, so + * there's no need to patch an identical NOP over the top of it here. + * The generic code calls 'arch_jump_label_transform' if the NOP needs + * to be replaced by a branch, so 'arch_jump_label_transform_static' is + * never called with type other than JUMP_LABEL_NOP. + */ + BUG_ON(type != JUMP_LABEL_NOP); +} + +#ifdef CONFIG_ARC_DBG_JUMP_LABEL +#define SELFTEST_MSG "ARC: instruction generation self-test: " + +struct arc_gen_branch_testdata { + jump_label_t pc; + jump_label_t target_address; + u32 expected_instr; +}; + +static __init int branch_gen_test(const struct arc_gen_branch_testdata *test) +{ + u32 instr_got; + + instr_got = arc_gen_branch(test->pc, test->target_address); + if (instr_got == test->expected_instr) + return 0; + + pr_err(SELFTEST_MSG "FAIL:\n arc_gen_branch(0x%08x, 0x%08x) != 0x%08x, got 0x%08x\n", + test->pc, test->target_address, + test->expected_instr, instr_got); + + return -EFAULT; +} + +/* + * Offset field in branch instruction is not continuous. Test all + * available offset field and sign combinations. Test data is generated + * from real working code. + */ +static const struct arc_gen_branch_testdata arcgenbr_test_data[] __initconst = { + {0x90007548, 0x90007514, 0xffcf07cd}, /* tiny (-52) offs */ + {0x9000c9c0, 0x9000c782, 0xffcf05c3}, /* tiny (-574) offs */ + {0x9000cc1c, 0x9000c782, 0xffcf0367}, /* tiny (-1178) offs */ + {0x9009dce0, 0x9009d106, 0xff8f0427}, /* small (-3034) offs */ + {0x9000f5de, 0x90007d30, 0xfc0f0755}, /* big (-30892) offs */ + {0x900a2444, 0x90035f64, 0xc9cf0321}, /* huge (-443616) offs */ + {0x90007514, 0x9000752c, 0x00000019}, /* tiny (+24) offs */ + {0x9001a578, 0x9001a77a, 0x00000203}, /* tiny (+514) offs */ + {0x90031ed8, 0x90032634, 0x0000075d}, /* tiny (+1884) offs */ + {0x9008c7f2, 0x9008d3f0, 0x00400401}, /* small (+3072) offs */ + {0x9000bb38, 0x9003b340, 0x17c00009}, /* big (+194568) offs */ + {0x90008f44, 0x90578d80, 0xb7c2063d} /* huge (+5701180) offs */ +}; + +static __init int instr_gen_test(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(arcgenbr_test_data); i++) + if (branch_gen_test(&arcgenbr_test_data[i])) + return -EFAULT; + + pr_info(SELFTEST_MSG "OK\n"); + + return 0; +} +early_initcall(instr_gen_test); + +#endif /* CONFIG_ARC_DBG_JUMP_LABEL */ diff --git a/arch/arc/mm/dma.c b/arch/arc/mm/dma.c index 73a7e88a1e92..e947572a521e 100644 --- a/arch/arc/mm/dma.c +++ b/arch/arc/mm/dma.c @@ -48,8 +48,8 @@ void arch_dma_prep_coherent(struct page *page, size_t size) * upper layer functions (in include/linux/dma-mapping.h) */ -void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_device(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { switch (dir) { case DMA_TO_DEVICE: @@ -69,8 +69,8 @@ void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr, } } -void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { switch (dir) { case DMA_TO_DEVICE: diff --git a/arch/arc/mm/fault.c b/arch/arc/mm/fault.c index 3861543b66a0..fb86bc3e9b35 100644 --- a/arch/arc/mm/fault.c +++ b/arch/arc/mm/fault.c @@ -30,6 +30,7 @@ noinline static int handle_kernel_vaddr_fault(unsigned long address) * with the 'reference' page table. */ pgd_t *pgd, *pgd_k; + p4d_t *p4d, *p4d_k; pud_t *pud, *pud_k; pmd_t *pmd, *pmd_k; @@ -39,8 +40,13 @@ noinline static int handle_kernel_vaddr_fault(unsigned long address) if (!pgd_present(*pgd_k)) goto bad_area; - pud = pud_offset(pgd, address); - pud_k = pud_offset(pgd_k, address); + p4d = p4d_offset(pgd, address); + p4d_k = p4d_offset(pgd_k, address); + if (!p4d_present(*p4d_k)) + goto bad_area; + + pud = pud_offset(p4d, address); + pud_k = pud_offset(p4d_k, address); if (!pud_present(*pud_k)) goto bad_area; diff --git a/arch/arc/mm/highmem.c b/arch/arc/mm/highmem.c index a4856bfaedf3..fc8849e4f72e 100644 --- a/arch/arc/mm/highmem.c +++ b/arch/arc/mm/highmem.c @@ -111,12 +111,14 @@ EXPORT_SYMBOL(__kunmap_atomic); static noinline pte_t * __init alloc_kmap_pgtable(unsigned long kvaddr) { pgd_t *pgd_k; + p4d_t *p4d_k; pud_t *pud_k; pmd_t *pmd_k; pte_t *pte_k; pgd_k = pgd_offset_k(kvaddr); - pud_k = pud_offset(pgd_k, kvaddr); + p4d_k = p4d_offset(pgd_k, kvaddr); + pud_k = pud_offset(p4d_k, kvaddr); pmd_k = pmd_offset(pud_k, kvaddr); pte_k = (pte_t *)memblock_alloc_low(PAGE_SIZE, PAGE_SIZE); diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c index 10025e199353..c340acd989a0 100644 --- a/arch/arc/mm/tlb.c +++ b/arch/arc/mm/tlb.c @@ -118,6 +118,33 @@ static inline void __tlb_entry_erase(void) write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite); } +static void utlb_invalidate(void) +{ +#if (CONFIG_ARC_MMU_VER >= 2) + +#if (CONFIG_ARC_MMU_VER == 2) + /* MMU v2 introduced the uTLB Flush command. + * There was however an obscure hardware bug, where uTLB flush would + * fail when a prior probe for J-TLB (both totally unrelated) would + * return lkup err - because the entry didn't exist in MMU. + * The Workround was to set Index reg with some valid value, prior to + * flush. This was fixed in MMU v3 + */ + unsigned int idx; + + /* make sure INDEX Reg is valid */ + idx = read_aux_reg(ARC_REG_TLBINDEX); + + /* If not write some dummy val */ + if (unlikely(idx & TLB_LKUP_ERR)) + write_aux_reg(ARC_REG_TLBINDEX, 0xa); +#endif + + write_aux_reg(ARC_REG_TLBCOMMAND, TLBIVUTLB); +#endif + +} + #if (CONFIG_ARC_MMU_VER < 4) static inline unsigned int tlb_entry_lkup(unsigned long vaddr_n_asid) @@ -149,44 +176,6 @@ static void tlb_entry_erase(unsigned int vaddr_n_asid) } } -/**************************************************************************** - * ARC700 MMU caches recently used J-TLB entries (RAM) as uTLBs (FLOPs) - * - * New IVUTLB cmd in MMU v2 explictly invalidates the uTLB - * - * utlb_invalidate ( ) - * -For v2 MMU calls Flush uTLB Cmd - * -For v1 MMU does nothing (except for Metal Fix v1 MMU) - * This is because in v1 TLBWrite itself invalidate uTLBs - ***************************************************************************/ - -static void utlb_invalidate(void) -{ -#if (CONFIG_ARC_MMU_VER >= 2) - -#if (CONFIG_ARC_MMU_VER == 2) - /* MMU v2 introduced the uTLB Flush command. - * There was however an obscure hardware bug, where uTLB flush would - * fail when a prior probe for J-TLB (both totally unrelated) would - * return lkup err - because the entry didn't exist in MMU. - * The Workround was to set Index reg with some valid value, prior to - * flush. This was fixed in MMU v3 hence not needed any more - */ - unsigned int idx; - - /* make sure INDEX Reg is valid */ - idx = read_aux_reg(ARC_REG_TLBINDEX); - - /* If not write some dummy val */ - if (unlikely(idx & TLB_LKUP_ERR)) - write_aux_reg(ARC_REG_TLBINDEX, 0xa); -#endif - - write_aux_reg(ARC_REG_TLBCOMMAND, TLBIVUTLB); -#endif - -} - static void tlb_entry_insert(unsigned int pd0, pte_t pd1) { unsigned int idx; @@ -219,11 +208,6 @@ static void tlb_entry_insert(unsigned int pd0, pte_t pd1) #else /* CONFIG_ARC_MMU_VER >= 4) */ -static void utlb_invalidate(void) -{ - /* No need since uTLB is always in sync with JTLB */ -} - static void tlb_entry_erase(unsigned int vaddr_n_asid) { write_aux_reg(ARC_REG_TLBPD0, vaddr_n_asid | _PAGE_PRESENT); @@ -267,7 +251,7 @@ noinline void local_flush_tlb_all(void) for (entry = 0; entry < num_tlb; entry++) { /* write this entry to the TLB */ write_aux_reg(ARC_REG_TLBINDEX, entry); - write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite); + write_aux_reg(ARC_REG_TLBCOMMAND, TLBWriteNI); } if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE)) { @@ -278,7 +262,7 @@ noinline void local_flush_tlb_all(void) for (entry = stlb_idx; entry < stlb_idx + 16; entry++) { write_aux_reg(ARC_REG_TLBINDEX, entry); - write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite); + write_aux_reg(ARC_REG_TLBCOMMAND, TLBWriteNI); } } @@ -355,8 +339,6 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, } } - utlb_invalidate(); - local_irq_restore(flags); } @@ -385,8 +367,6 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) start += PAGE_SIZE; } - utlb_invalidate(); - local_irq_restore(flags); } @@ -407,7 +387,6 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) if (asid_mm(vma->vm_mm, cpu) != MM_CTXT_NO_ASID) { tlb_entry_erase((page & PAGE_MASK) | hw_pid(vma->vm_mm, cpu)); - utlb_invalidate(); } local_irq_restore(flags); @@ -868,7 +847,7 @@ void arc_mmu_init(void) write_aux_reg(ARC_REG_PID, MMU_ENABLE); /* In smp we use this reg for interrupt 1 scratch */ -#ifndef CONFIG_SMP +#ifdef ARC_USE_SCRATCH_REG /* swapper_pg_dir is the pgd for the kernel, used by vmalloc */ write_aux_reg(ARC_REG_SCRATCH_DATA0, swapper_pg_dir); #endif diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S index c55d95dd2f39..2efaf6ca0c06 100644 --- a/arch/arc/mm/tlbex.S +++ b/arch/arc/mm/tlbex.S @@ -122,17 +122,27 @@ ex_saved_reg1: #else /* ARCv2 */ .macro TLBMISS_FREEUP_REGS +#ifdef CONFIG_ARC_HAS_LL64 + std r0, [sp, -16] + std r2, [sp, -8] +#else PUSH r0 PUSH r1 PUSH r2 PUSH r3 +#endif .endm .macro TLBMISS_RESTORE_REGS +#ifdef CONFIG_ARC_HAS_LL64 + ldd r0, [sp, -16] + ldd r2, [sp, -8] +#else POP r3 POP r2 POP r1 POP r0 +#endif .endm #endif @@ -193,7 +203,7 @@ ex_saved_reg1: lr r2, [efa] -#ifndef CONFIG_SMP +#ifdef ARC_USE_SCRATCH_REG lr r1, [ARC_REG_SCRATCH_DATA0] ; current pgd #else GET_CURR_TASK_ON_CPU r1 @@ -282,11 +292,7 @@ ex_saved_reg1: sr TLBGetIndex, [ARC_REG_TLBCOMMAND] /* Commit the Write */ -#if (CONFIG_ARC_MMU_VER >= 2) /* introduced in v2 */ sr TLBWriteNI, [ARC_REG_TLBCOMMAND] -#else - sr TLBWrite, [ARC_REG_TLBCOMMAND] -#endif #else sr TLBInsertEntry, [ARC_REG_TLBCOMMAND] @@ -370,9 +376,7 @@ ENTRY(EV_TLBMissD) ;---------------------------------------------------------------- ; UPDATE_PTE: Let Linux VM know that page was accessed/dirty - lr r3, [ecr] or r0, r0, _PAGE_ACCESSED ; Accessed bit always - btst_s r3, ECR_C_BIT_DTLB_ST_MISS ; See if it was a Write Access ? or.nz r0, r0, _PAGE_DIRTY ; if Write, set Dirty bit as well st_s r0, [r1] ; Write back PTE diff --git a/arch/arc/plat-sim/platform.c b/arch/arc/plat-sim/platform.c index 3765dedcd319..2bde2a6e336a 100644 --- a/arch/arc/plat-sim/platform.c +++ b/arch/arc/plat-sim/platform.c @@ -21,7 +21,6 @@ static const char *simulation_compat[] __initconst = { "snps,nsim", "snps,nsimosci", #else - "snps,nsim_hs", "snps,nsimosci_hs", "snps,zebu_hs", #endif diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 0d3c5d7cceb7..ba75e3661a41 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -7,7 +7,6 @@ config ARM select ARCH_HAS_BINFMT_FLAT select ARCH_HAS_DEBUG_VIRTUAL if MMU select ARCH_HAS_DEVMEM_IS_ALLOWED - select ARCH_HAS_DMA_COHERENT_TO_PFN if SWIOTLB select ARCH_HAS_DMA_WRITE_COMBINE if !ARM_DMA_MEM_BUFFERABLE select ARCH_HAS_ELF_RANDOMIZE select ARCH_HAS_FORTIFY_SOURCE @@ -1019,7 +1018,7 @@ config ARM_ERRATA_775420 depends on CPU_V7 help This option enables the workaround for the 775420 Cortex-A9 (r2p2, - r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance + r2p6,r2p8,r2p10,r3p0) erratum. In case a data cache maintenance operation aborts with MMU exception, it might cause the processor to deadlock. This workaround puts DSB before executing ISB if an abort may occur on cache maintenance. @@ -1358,7 +1357,7 @@ config ARCH_NR_GPIO int default 2048 if ARCH_SOCFPGA default 1024 if ARCH_BRCMSTB || ARCH_RENESAS || ARCH_TEGRA || \ - ARCH_ZYNQ + ARCH_ZYNQ || ARCH_ASPEED default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \ SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 default 416 if ARCH_SUNXI diff --git a/arch/arm/boot/bootp/init.S b/arch/arm/boot/bootp/init.S index 5c476bd2b4ce..b562da2f7040 100644 --- a/arch/arm/boot/bootp/init.S +++ b/arch/arm/boot/bootp/init.S @@ -13,7 +13,7 @@ * size immediately following the kernel, we could build this into * a binary blob, and concatenate the zImage using the cat command. */ - .section .start,#alloc,#execinstr + .section .start, "ax" .type _start, #function .globl _start diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 9219389bbe61..a1e883c5e5c4 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -121,7 +121,7 @@ ccflags-y := -fpic $(call cc-option,-mno-single-pic-base,) -fno-builtin -I$(obj) asflags-y := -DZIMAGE # Supply kernel BSS size to the decompressor via a linker symbol. -KBSS_SZ = $(shell echo $$(($$($(CROSS_COMPILE)nm $(obj)/../../../../vmlinux | \ +KBSS_SZ = $(shell echo $$(($$($(NM) $(obj)/../../../../vmlinux | \ sed -n -e 's/^\([^ ]*\) [AB] __bss_start$$/-0x\1/p' \ -e 's/^\([^ ]*\) [AB] __bss_stop$$/+0x\1/p') )) ) LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ) @@ -165,7 +165,7 @@ $(obj)/bswapsdi2.S: $(srctree)/arch/$(SRCARCH)/lib/bswapsdi2.S # The .data section is already discarded by the linker script so no need # to bother about it here. check_for_bad_syms = \ -bad_syms=$$($(CROSS_COMPILE)nm $@ | sed -n 's/^.\{8\} [bc] \(.*\)/\1/p') && \ +bad_syms=$$($(NM) $@ | sed -n 's/^.\{8\} [bc] \(.*\)/\1/p') && \ [ -z "$$bad_syms" ] || \ ( echo "following symbols must have non local/private scope:" >&2; \ echo "$$bad_syms" >&2; false ) diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c index 330cd3c2eae5..64c49747f8a3 100644 --- a/arch/arm/boot/compressed/atags_to_fdt.c +++ b/arch/arm/boot/compressed/atags_to_fdt.c @@ -19,7 +19,7 @@ static int node_offset(void *fdt, const char *node_path) } static int setprop(void *fdt, const char *node_path, const char *property, - uint32_t *val_array, int size) + void *val_array, int size) { int offset = node_offset(fdt, node_path); if (offset < 0) @@ -60,7 +60,7 @@ static uint32_t get_cell_size(const void *fdt) { int len; uint32_t cell_size = 1; - const uint32_t *size_len = getprop(fdt, "/", "#size-cells", &len); + const __be32 *size_len = getprop(fdt, "/", "#size-cells", &len); if (size_len) cell_size = fdt32_to_cpu(*size_len); @@ -129,7 +129,7 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space) struct tag *atag = atag_list; /* In the case of 64 bits memory size, need to reserve 2 cells for * address and size for each bank */ - uint32_t mem_reg_property[2 * 2 * NR_BANKS]; + __be32 mem_reg_property[2 * 2 * NR_BANKS]; int memcount = 0; int ret, memsize; @@ -138,7 +138,7 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space) return 1; /* if we get a DTB here we're done already */ - if (*(u32 *)atag_list == fdt32_to_cpu(FDT_MAGIC)) + if (*(__be32 *)atag_list == cpu_to_fdt32(FDT_MAGIC)) return 0; /* validate the ATAG */ @@ -177,8 +177,8 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space) /* if memsize is 2, that means that * each data needs 2 cells of 32 bits, * so the data are 64 bits */ - uint64_t *mem_reg_prop64 = - (uint64_t *)mem_reg_property; + __be64 *mem_reg_prop64 = + (__be64 *)mem_reg_property; mem_reg_prop64[memcount++] = cpu_to_fdt64(atag->u.mem.start); mem_reg_prop64[memcount++] = diff --git a/arch/arm/boot/compressed/big-endian.S b/arch/arm/boot/compressed/big-endian.S index 88e2a88d324b..0e092c36da2f 100644 --- a/arch/arm/boot/compressed/big-endian.S +++ b/arch/arm/boot/compressed/big-endian.S @@ -6,7 +6,7 @@ * Author: Nicolas Pitre */ - .section ".start", #alloc, #execinstr + .section ".start", "ax" mrc p15, 0, r0, c1, c0, 0 @ read control reg orr r0, r0, #(1 << 7) @ enable big endian mode diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 93dffed0ac6e..ead21e5f2b80 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -140,7 +140,7 @@ #endif .endm - .section ".start", #alloc, #execinstr + .section ".start", "ax" /* * sort out different calling conventions */ @@ -1273,7 +1273,7 @@ iflush: __armv5tej_mmu_cache_flush: tst r4, #1 movne pc, lr -1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate D cache +1: mrc p15, 0, APSR_nzcv, c7, c14, 3 @ test,clean,invalidate D cache bne 1b mcr p15, 0, r0, c7, c5, 0 @ flush I cache mcr p15, 0, r0, c7, c10, 4 @ drain WB diff --git a/arch/arm/boot/compressed/libfdt_env.h b/arch/arm/boot/compressed/libfdt_env.h index b36c0289a308..6a0f1f524466 100644 --- a/arch/arm/boot/compressed/libfdt_env.h +++ b/arch/arm/boot/compressed/libfdt_env.h @@ -2,11 +2,13 @@ #ifndef _ARM_LIBFDT_ENV_H #define _ARM_LIBFDT_ENV_H +#include <linux/limits.h> #include <linux/types.h> #include <linux/string.h> #include <asm/byteorder.h> -#define INT_MAX ((int)(~0U>>1)) +#define INT32_MAX S32_MAX +#define UINT32_MAX U32_MAX typedef __be16 fdt16_t; typedef __be32 fdt32_t; diff --git a/arch/arm/boot/compressed/piggy.S b/arch/arm/boot/compressed/piggy.S index 0284f84dcf38..27577644ee72 100644 --- a/arch/arm/boot/compressed/piggy.S +++ b/arch/arm/boot/compressed/piggy.S @@ -1,5 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0 */ - .section .piggydata,#alloc + .section .piggydata, "a" .globl input_data input_data: .incbin "arch/arm/boot/compressed/piggy_data" diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b21b3a64641a..08011dc8c7a6 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -45,7 +45,8 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ at91sam9x25ek.dtb \ at91sam9x35ek.dtb dtb-$(CONFIG_SOC_SAM_V7) += \ - at91-kizbox2.dtb \ + at91-kizbox2-2.dtb \ + at91-kizbox3-hs.dtb \ at91-nattis-2-natte-2.dtb \ at91-sama5d27_som1_ek.dtb \ at91-sama5d2_ptc_ek.dtb \ @@ -83,6 +84,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2837-rpi-3-b.dtb \ bcm2837-rpi-3-b-plus.dtb \ bcm2837-rpi-cm3-io3.dtb \ + bcm2711-rpi-4-b.dtb \ bcm2835-rpi-zero.dtb \ bcm2835-rpi-zero-w.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += \ @@ -113,6 +115,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm47094-luxul-abr-4500.dtb \ bcm47094-luxul-xap-1610.dtb \ bcm47094-luxul-xbr-4500.dtb \ + bcm47094-luxul-xwc-2000.dtb \ bcm47094-luxul-xwr-3100.dtb \ bcm47094-luxul-xwr-3150-v1.dtb \ bcm47094-netgear-r8500.dtb \ @@ -337,7 +340,8 @@ dtb-$(CONFIG_ARCH_MMP) += \ pxa168-aspenite.dtb \ pxa910-dkb.dtb \ mmp2-brownstone.dtb \ - mmp2-olpc-xo-1-75.dtb + mmp2-olpc-xo-1-75.dtb \ + mmp3-dell-ariel.dtb dtb-$(CONFIG_ARCH_MPS2) += \ mps2-an385.dtb \ mps2-an399.dtb @@ -552,7 +556,8 @@ dtb-$(CONFIG_SOC_IMX6SL) += \ imx6sl-evk.dtb \ imx6sl-warp.dtb dtb-$(CONFIG_SOC_IMX6SLL) += \ - imx6sll-evk.dtb + imx6sll-evk.dtb \ + imx6sll-kobo-clarahd.dtb dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-nitrogen6sx.dtb \ imx6sx-sabreauto.dtb \ @@ -583,6 +588,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ull-14x14-evk.dtb \ imx6ull-colibri-eval-v3.dtb \ imx6ull-colibri-wifi-eval-v3.dtb \ + imx6ull-opos6uldev.dtb \ imx6ull-phytec-segin-ff-rdk-nand.dtb \ imx6ull-phytec-segin-ff-rdk-emmc.dtb \ imx6ull-phytec-segin-lc-rdk-nand.dtb \ @@ -753,6 +759,9 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-moxa-uc-2101.dtb \ am335x-moxa-uc-8100-me-t.dtb \ am335x-nano.dtb \ + am335x-netcan-plus-1xx.dtb \ + am335x-netcom-plus-2xx.dtb \ + am335x-netcom-plus-8xx.dtb \ am335x-pdu001.dtb \ am335x-pepper.dtb \ am335x-phycore-rdk.dtb \ @@ -765,6 +774,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-wega-rdk.dtb \ am335x-osd3358-sm-red.dtb dtb-$(CONFIG_ARCH_OMAP4) += \ + omap4-droid-bionic-xt875.dtb \ omap4-droid4-xt894.dtb \ omap4-duovero-parlor.dtb \ omap4-kc1.dtb \ @@ -1105,6 +1115,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-beelink-x2.dtb \ sun8i-h3-libretech-all-h3-cc.dtb \ sun8i-h3-mapleboard-mp130.dtb \ + sun8i-h3-nanopi-duo2.dtb \ sun8i-h3-nanopi-m1.dtb \ sun8i-h3-nanopi-m1-plus.dtb \ sun8i-h3-nanopi-neo.dtb \ @@ -1288,6 +1299,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-facebook-wedge40.dtb \ aspeed-bmc-facebook-wedge100.dtb \ aspeed-bmc-facebook-yamp.dtb \ + aspeed-bmc-ibm-rainier.dtb \ aspeed-bmc-intel-s2600wf.dtb \ aspeed-bmc-inspur-fp5280g2.dtb \ aspeed-bmc-lenovo-hr630.dtb \ @@ -1298,6 +1310,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-opp-palmetto.dtb \ aspeed-bmc-opp-romulus.dtb \ aspeed-bmc-opp-swift.dtb \ + aspeed-bmc-opp-tacoma.dtb \ aspeed-bmc-opp-vesnin.dtb \ aspeed-bmc-opp-witherspoon.dtb \ aspeed-bmc-opp-zaius.dtb \ diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi index ed235f263e29..05e7b5d4a95b 100644 --- a/arch/arm/boot/dts/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/am335x-baltos.dtsi @@ -258,18 +258,6 @@ }; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&cppi41dma { - status = "okay"; -}; - #include "tps65910.dtsi" &tps { diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 89b4cf2cb7f8..6c9187bc0f17 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -191,38 +191,16 @@ status = "okay"; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - &usb0 { - status = "okay"; dr_mode = "peripheral"; interrupts-extended = <&intc 18 &tps 0>; interrupt-names = "mc", "vbus"; }; &usb1 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts index 2f6652ef9a15..5811fb8d4fdf 100644 --- a/arch/arm/boot/dts/am335x-boneblue.dts +++ b/arch/arm/boot/dts/am335x-boneblue.dts @@ -278,38 +278,16 @@ status = "okay"; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - &usb0 { - status = "okay"; dr_mode = "peripheral"; interrupts-extended = <&intc 18 &tps 0>; interrupt-names = "mc", "vbus"; }; &usb1 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - &i2c0 { baseboard_eeprom: baseboard_eeprom@50 { compatible = "atmel,24c256"; diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts index 8cd81dc0cc72..b14a2759c69b 100644 --- a/arch/arm/boot/dts/am335x-chiliboard.dts +++ b/arch/arm/boot/dts/am335x-chiliboard.dts @@ -153,30 +153,12 @@ }; /* USB */ -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - &usb1 { pinctrl-names = "default"; pinctrl-0 = <&usb1_drvvbus>; - - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - /* microSD */ &mmc1 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts index 1fe3b566ba3d..c6fe9db660e2 100644 --- a/arch/arm/boot/dts/am335x-cm-t335.dts +++ b/arch/arm/boot/dts/am335x-cm-t335.dts @@ -330,26 +330,6 @@ status = "okay"; }; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&cppi41dma { - status = "okay"; -}; - &epwmss0 { status = "okay"; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index a00145705c9b..6f0a6be93098 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -433,35 +433,10 @@ }; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - &usb1 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index e28a5b82fdf3..a97f9df460c1 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -523,35 +523,10 @@ }; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - &usb1 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - &epwmss2 { status = "okay"; diff --git a/arch/arm/boot/dts/am335x-guardian.dts b/arch/arm/boot/dts/am335x-guardian.dts index c9611ea4b884..81e0f63e94d3 100644 --- a/arch/arm/boot/dts/am335x-guardian.dts +++ b/arch/arm/boot/dts/am335x-guardian.dts @@ -115,10 +115,6 @@ }; }; -&cppi41dma { - status = "okay"; -}; - &elm { status = "okay"; }; @@ -328,30 +324,12 @@ status = "okay"; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - &usb0 { dr_mode = "peripheral"; - status = "okay"; -}; - -&usb0_phy { - status = "okay"; }; &usb1 { dr_mode = "host"; - status = "okay"; -}; - -&usb1_phy { - status = "okay"; }; &am33xx_pinmux { diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index eabcc8b2e4ea..c9f354fc984a 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -217,35 +217,10 @@ pinctrl-0 = <&uart0_pins>; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - &usb1 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - #include "tps65910.dtsi" &tps { diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts index a8005e975ea2..fef582852820 100644 --- a/arch/arm/boot/dts/am335x-lxm.dts +++ b/arch/arm/boot/dts/am335x-lxm.dts @@ -283,36 +283,14 @@ status = "okay"; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - &usb0 { - status = "okay"; dr_mode = "host"; }; &usb1 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - &cpsw_emac0 { phy-handle = <ðphy0>; phy-mode = "rmii"; diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi index 671d4a5da9c4..6495a125c01f 100644 --- a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi +++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi @@ -111,27 +111,10 @@ }; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - &usb0 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - /* Power */ &vbat { regulator-name = "vbat"; diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts index 783d411f2cef..244df9c5a537 100644 --- a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts +++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts @@ -290,36 +290,14 @@ }; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - &usb0 { - status = "okay"; dr_mode = "host"; }; &usb1 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - #include "tps65910.dtsi" &tps { diff --git a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts new file mode 100644 index 000000000000..1e4dbc85c120 --- /dev/null +++ b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + */ + +/* + * VScom OnRISC + * http://www.vscom.de + */ + +/dts-v1/; + +#include "am335x-baltos.dtsi" +#include "am335x-baltos-leds.dtsi" + +/ { + model = "NetCAN"; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + + compatible = "gpio-leds"; + + led@1 { + label = "can_data"; + linux,default-trigger = "netdev"; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@2 { + label = "can_error"; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; +}; + +&am33xx_pinmux { + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* CAN Data LED */ + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* CAN Error LED */ + >; + }; + + dcan1_pins: pinmux_dcan1_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* CAN TX */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2) /* CAN RX */ + >; + }; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&davinci_mdio { + phy0: ethernet-phy@0 { + reg = <1>; + }; +}; + +&cpsw_emac0 { + phy-mode = "rmii"; + dual_emac_res_vlan = <1>; + phy-handle = <&phy0>; +}; + +&cpsw_emac1 { + phy-mode = "rgmii-id"; + dual_emac_res_vlan = <2>; + phy-handle = <&phy1>; +}; + +&dcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan1_pins>; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts new file mode 100644 index 000000000000..9a6cd8ef821f --- /dev/null +++ b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + */ + +/* + * VScom OnRISC + * http://www.vscom.de + */ + +/dts-v1/; + +#include "am335x-baltos.dtsi" +#include "am335x-baltos-leds.dtsi" + +/ { + model = "NetCom Plus"; +}; + +&am33xx_pinmux { + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0) /* RX */ + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0) /* TX */ + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0) /* CTS */ + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* RTS */ + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* DTR */ + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DSR */ + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DCD */ + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* RI */ + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) /* RX */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) /* TX */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2) /* CTS */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* RTS */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* DTR */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DSR */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DCD */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7) /* RI */ + >; + }; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; + rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&davinci_mdio { + phy0: ethernet-phy@0 { + reg = <1>; + }; +}; + +&cpsw_emac0 { + phy-mode = "rmii"; + dual_emac_res_vlan = <1>; + phy-handle = <&phy0>; +}; + +&cpsw_emac1 { + phy-mode = "rgmii-id"; + dual_emac_res_vlan = <2>; + phy-handle = <&phy1>; +}; diff --git a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts new file mode 100644 index 000000000000..2298563f7334 --- /dev/null +++ b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts @@ -0,0 +1,115 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + */ + +/* + * VScom OnRISC + * http://www.vscom.de + */ + +/dts-v1/; + +#include "am335x-baltos.dtsi" + +/ { + model = "NetCom Plus"; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&dip_switches>; + + dip_switches: pinmux_dip_switches { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + tca6416_pins: pinmux_tca6416_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7) + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE3) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE3) + >; + }; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&i2c1 { + tca6416a: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <20 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&tca6416_pins>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tca6416b: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + tca6416c: gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&davinci_mdio { + phy0: ethernet-phy@0 { + reg = <1>; + }; +}; + +&cpsw_emac0 { + phy-mode = "rmii"; + dual_emac_res_vlan = <1>; + phy-handle = <&phy0>; +}; + +&cpsw_emac1 { + phy-mode = "rgmii-id"; + dual_emac_res_vlan = <2>; + phy-handle = <&phy1>; +}; diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts index f47cc9fea253..1d2902083483 100644 --- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts +++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts @@ -384,38 +384,16 @@ status = "okay"; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - &usb0 { - status = "okay"; dr_mode = "peripheral"; interrupts-extended = <&intc 18 &tps 0>; interrupt-names = "mc", "vbus"; }; &usb1 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins>; diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi index 9bfa032bcada..6c547c83e5dd 100644 --- a/arch/arm/boot/dts/am335x-pcm-953.dtsi +++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi @@ -237,31 +237,6 @@ }; /* USB */ -&cppi41dma { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - &usb1 { - status = "okay"; dr_mode = "host"; }; - -&usb1_phy { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/am335x-pdu001.dts b/arch/arm/boot/dts/am335x-pdu001.dts index 3141255f72c2..e4dcfa087a1b 100644 --- a/arch/arm/boot/dts/am335x-pdu001.dts +++ b/arch/arm/boot/dts/am335x-pdu001.dts @@ -384,34 +384,6 @@ }; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&usb1 { - status = "okay"; -}; - -&cppi41dma { - status = "okay"; -}; - /* * Disable soc's rtc as we have no VBAT for it. This makes the board * rtc (Microchip MCP79400) the default rtc device 'rtc0'. diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts index e7764ecdf65f..6d7608d9377b 100644 --- a/arch/arm/boot/dts/am335x-pepper.dts +++ b/arch/arm/boot/dts/am335x-pepper.dts @@ -552,38 +552,18 @@ /* USB */ &usb { - status = "okay"; - pinctrl-names = "default"; pinctrl-0 = <&usb_pins>; }; -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - &usb0 { - status = "okay"; dr_mode = "host"; }; &usb1 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - &am33xx_pinmux { usb_pins: pinmux_usb { pinctrl-single,pins = < diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts index ff4f919d22f6..4da719098028 100644 --- a/arch/arm/boot/dts/am335x-pocketbeagle.dts +++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts @@ -206,32 +206,10 @@ status = "okay"; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - &usb0 { - status = "okay"; dr_mode = "otg"; }; -&usb1_phy { - status = "okay"; -}; - &usb1 { - status = "okay"; dr_mode = "host"; }; - -&cppi41dma { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/am335x-regor.dtsi b/arch/arm/boot/dts/am335x-regor.dtsi index 5aff02a95766..6fbf4ac739e7 100644 --- a/arch/arm/boot/dts/am335x-regor.dtsi +++ b/arch/arm/boot/dts/am335x-regor.dtsi @@ -200,24 +200,3 @@ status = "okay"; linux,rs485-enabled-at-boot-time; }; - -/* USB */ -&cppi41dma { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts index 5b0368504015..1eaa26533466 100644 --- a/arch/arm/boot/dts/am335x-shc.dts +++ b/arch/arm/boot/dts/am335x-shc.dts @@ -117,10 +117,6 @@ status = "okay"; }; -&cppi41dma { - status = "okay"; -}; - &davinci_mdio { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; @@ -358,20 +354,7 @@ status = "okay"; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - &usb1 { - status = "okay"; dr_mode = "host"; }; diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts index 2f82095e7210..f4684c8eaffe 100644 --- a/arch/arm/boot/dts/am335x-sl50.dts +++ b/arch/arm/boot/dts/am335x-sl50.dts @@ -512,36 +512,14 @@ status = "disabled"; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - &usb0 { - status = "okay"; dr_mode = "otg"; }; &usb1 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - &mmc1 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi index 61fc4cd2d164..1359bf8715e6 100644 --- a/arch/arm/boot/dts/am335x-wega.dtsi +++ b/arch/arm/boot/dts/am335x-wega.dtsi @@ -191,32 +191,6 @@ status = "okay"; }; -/* USB */ -&cppi41dma { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - &usb1 { dr_mode = "host"; - status = "okay"; -}; - -&usb1_phy { - status = "okay"; }; diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 7a9eb2b0d45b..3a8a205c27b5 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -129,7 +129,6 @@ gpio0_target: target-module@7000 { /* 0x44e07000, ap 14 20.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio1"; reg = <0x7000 0x4>, <0x7010 0x4>, <0x7114 0x4>; @@ -163,7 +162,6 @@ target-module@9000 { /* 0x44e09000, ap 16 04.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart1"; reg = <0x9050 0x4>, <0x9054 0x4>, <0x9058 0x4>; @@ -195,7 +193,6 @@ target-module@b000 { /* 0x44e0b000, ap 18 48.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c1"; reg = <0xb000 0x8>, <0xb010 0x8>, <0xb090 0x8>; @@ -306,6 +303,13 @@ }; }; + usb_ctrl_mod: control@620 { + compatible = "ti,am335x-usb-ctrl-module"; + reg = <0x620 0x10>, + <0x648 0x4>; + reg-names = "phy_ctrl", "wakeup"; + }; + wkup_m3_ipc: wkup_m3_ipc@1324 { compatible = "ti,am3352-wkup-m3-ipc"; reg = <0x1324 0x24>; @@ -368,7 +372,6 @@ target-module@35000 { /* 0x44e35000, ap 29 50.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "wd_timer2"; reg = <0x35000 0x4>, <0x35010 0x4>, <0x35014 0x4>; @@ -912,7 +915,6 @@ target-module@22000 { /* 0x48022000, ap 10 12.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart2"; reg = <0x22050 0x4>, <0x22054 0x4>, <0x22058 0x4>; @@ -944,7 +946,6 @@ target-module@24000 { /* 0x48024000, ap 12 14.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart3"; reg = <0x24050 0x4>, <0x24054 0x4>, <0x24058 0x4>; @@ -976,7 +977,6 @@ target-module@2a000 { /* 0x4802a000, ap 14 2a.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c2"; reg = <0x2a000 0x8>, <0x2a010 0x8>, <0x2a090 0x8>; @@ -1046,7 +1046,6 @@ target-module@38000 { /* 0x48038000, ap 16 02.0 */ compatible = "ti,sysc-omap4-simple", "ti,sysc"; - ti,hwmods = "mcasp0"; reg = <0x38000 0x4>, <0x38004 0x4>; reg-names = "rev", "sysc"; @@ -1077,7 +1076,6 @@ target-module@3c000 { /* 0x4803c000, ap 20 32.0 */ compatible = "ti,sysc-omap4-simple", "ti,sysc"; - ti,hwmods = "mcasp1"; reg = <0x3c000 0x4>, <0x3c004 0x4>; reg-names = "rev", "sysc"; @@ -1270,7 +1268,6 @@ target-module@4c000 { /* 0x4804c000, ap 32 36.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio2"; reg = <0x4c000 0x4>, <0x4c010 0x4>, <0x4c114 0x4>; @@ -1312,7 +1309,6 @@ target-module@60000 { /* 0x48060000, ap 36 0c.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mmc1"; reg = <0x602fc 0x4>, <0x60110 0x4>, <0x60114 0x4>; @@ -1385,7 +1381,6 @@ target-module@c8000 { /* 0x480c8000, ap 87 06.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox"; reg = <0xc8000 0x4>, <0xc8010 0x4>; reg-names = "rev", "sysc"; @@ -1506,7 +1501,6 @@ target-module@9c000 { /* 0x4819c000, ap 46 5a.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c3"; reg = <0x9c000 0x8>, <0x9c010 0x8>, <0x9c090 0x8>; @@ -1592,7 +1586,6 @@ target-module@a6000 { /* 0x481a6000, ap 48 16.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart4"; reg = <0xa6050 0x4>, <0xa6054 0x4>, <0xa6058 0x4>; @@ -1622,7 +1615,6 @@ target-module@a8000 { /* 0x481a8000, ap 50 20.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart5"; reg = <0xa8050 0x4>, <0xa8054 0x4>, <0xa8058 0x4>; @@ -1652,7 +1644,6 @@ target-module@aa000 { /* 0x481aa000, ap 52 1a.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart6"; reg = <0xaa050 0x4>, <0xaa054 0x4>, <0xaa058 0x4>; @@ -1682,7 +1673,6 @@ target-module@ac000 { /* 0x481ac000, ap 54 38.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio3"; reg = <0xac000 0x4>, <0xac010 0x4>, <0xac114 0x4>; @@ -1716,7 +1706,6 @@ target-module@ae000 { /* 0x481ae000, ap 56 3a.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio4"; reg = <0xae000 0x4>, <0xae010 0x4>, <0xae114 0x4>; @@ -1806,7 +1795,6 @@ target-module@d8000 { /* 0x481d8000, ap 64 66.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mmc2"; reg = <0xd82fc 0x4>, <0xd8110 0x4>, <0xd8114 0x4>; @@ -2061,7 +2049,6 @@ target-module@10000 { /* 0x48310000, ap 76 4e.1 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "rng"; reg = <0x11fe0 0x4>, <0x11fe4 0x4>; reg-names = "rev", "sysc"; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index fb6b8aa12cc5..646f11430dad 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -236,7 +236,6 @@ target-module@47810000 { compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mmc3"; reg = <0x478102fc 0x4>, <0x47810110 0x4>, <0x47810114 0x4>; @@ -263,37 +262,38 @@ }; }; - usb: usb@47400000 { - compatible = "ti,am33xx-usb"; - reg = <0x47400000 0x1000>; - ranges; + usb: target-module@47400000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x47400000 0x4>, + <0x47400010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + clocks = <&l3s_clkctrl AM3_L3S_USB_OTG_HS_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; - ti,hwmods = "usb_otg_hs"; - status = "disabled"; - - usb_ctrl_mod: control@44e10620 { - compatible = "ti,am335x-usb-ctrl-module"; - reg = <0x44e10620 0x10 - 0x44e10648 0x4>; - reg-names = "phy_ctrl", "wakeup"; - status = "disabled"; - }; + ranges = <0x0 0x47400000 0x5000>; - usb0_phy: usb-phy@47401300 { + usb0_phy: usb-phy@1300 { compatible = "ti,am335x-usb-phy"; - reg = <0x47401300 0x100>; + reg = <0x1300 0x100>; reg-names = "phy"; - status = "disabled"; ti,ctrl_mod = <&usb_ctrl_mod>; #phy-cells = <0>; }; - usb0: usb@47401000 { + usb0: usb@1400 { compatible = "ti,musb-am33xx"; - status = "disabled"; - reg = <0x47401400 0x400 - 0x47401000 0x200>; + reg = <0x1400 0x400>, + <0x1000 0x200>; reg-names = "mc", "control"; interrupts = <18>; @@ -329,20 +329,18 @@ "tx14", "tx15"; }; - usb1_phy: usb-phy@47401b00 { + usb1_phy: usb-phy@1b00 { compatible = "ti,am335x-usb-phy"; - reg = <0x47401b00 0x100>; + reg = <0x1b00 0x100>; reg-names = "phy"; - status = "disabled"; ti,ctrl_mod = <&usb_ctrl_mod>; #phy-cells = <0>; }; - usb1: usb@47401800 { + usb1: usb@1800 { compatible = "ti,musb-am33xx"; - status = "disabled"; - reg = <0x47401c00 0x400 - 0x47401800 0x200>; + reg = <0x1c00 0x400>, + <0x1800 0x200>; reg-names = "mc", "control"; interrupts = <19>; interrupt-names = "mc"; @@ -377,36 +375,35 @@ "tx14", "tx15"; }; - cppi41dma: dma-controller@47402000 { + cppi41dma: dma-controller@2000 { compatible = "ti,am3359-cppi41"; - reg = <0x47400000 0x1000 - 0x47402000 0x1000 - 0x47403000 0x1000 - 0x47404000 0x4000>; + reg = <0x0000 0x1000>, + <0x2000 0x1000>, + <0x3000 0x1000>, + <0x4000 0x4000>; reg-names = "glue", "controller", "scheduler", "queuemgr"; interrupts = <17>; interrupt-names = "glue"; #dma-cells = <2>; #dma-channels = <30>; #dma-requests = <256>; - status = "disabled"; }; }; - ocmcram: ocmcram@40300000 { + ocmcram: sram@40300000 { compatible = "mmio-sram"; reg = <0x40300000 0x10000>; /* 64k */ ranges = <0x0 0x40300000 0x10000>; #address-cells = <1>; #size-cells = <1>; - pm_sram_code: pm-sram-code@0 { + pm_sram_code: pm-code-sram@0 { compatible = "ti,sram"; reg = <0x0 0x1000>; protect-exec; }; - pm_sram_data: pm-sram-data@1000 { + pm_sram_data: pm-data-sram@1000 { compatible = "ti,sram"; reg = <0x1000 0x1000>; pool; @@ -465,3 +462,29 @@ #include "am33xx-l4.dtsi" #include "am33xx-clocks.dtsi" + +&prcm { + prm_per: prm@c00 { + compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; + reg = <0xc00 0x100>; + #reset-cells = <1>; + }; + + prm_wkup: prm@d00 { + compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; + reg = <0xd00 0x100>; + #reset-cells = <1>; + }; + + prm_device: prm@f00 { + compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; + reg = <0xf00 0x100>; + #reset-cells = <1>; + }; + + prm_gfx: prm@1100 { + compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; + reg = <0x1100 0x100>; + #reset-cells = <1>; + }; +}; diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi index bf3002009b00..125379ecab2f 100644 --- a/arch/arm/boot/dts/am3517.dtsi +++ b/arch/arm/boot/dts/am3517.dtsi @@ -16,6 +16,37 @@ can = &hecc; }; + cpus { + cpu: cpu@0 { + /* Based on OMAP3630 variants OPP50 and OPP100 */ + operating-points-v2 = <&cpu0_opp_table>; + + clock-latency = <300000>; /* From legacy driver */ + }; + }; + + cpu0_opp_table: opp-table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_conf>; + /* + * AM3517 TRM only lists 600MHz @ 1.2V, but omap36xx + * appear to operate at 300MHz as well. Since AM3517 only + * lists one operating voltage, it will remain fixed at 1.2V + */ + opp50-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <1200000>; + opp-supported-hw = <0xffffffff 0xffffffff>; + opp-suspend; + }; + + opp100-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1200000>; + opp-supported-hw = <0xffffffff 0xffffffff>; + }; + }; + ocp@68000000 { am35x_otg_hs: am35x_otg_hs@5c040000 { compatible = "ti,omap3-musb"; @@ -115,6 +146,12 @@ }; }; +/* Not currently working, probably needs at least different clocks */ +&rng_target { + status = "disabled"; + /delete-property/ clocks; +}; + /* Table Table 5-79 of the TRM shows 480ab000 is reserved */ &usb_otg_hs { status = "disabled"; diff --git a/arch/arm/boot/dts/am3517_mt_ventoux.dts b/arch/arm/boot/dts/am3517_mt_ventoux.dts index e507e4ae0d88..e7d7124a34ba 100644 --- a/arch/arm/boot/dts/am3517_mt_ventoux.dts +++ b/arch/arm/boot/dts/am3517_mt_ventoux.dts @@ -8,7 +8,7 @@ / { model = "TeeJet Mt.Ventoux"; - compatible = "teejet,mt_ventoux", "ti,omap3"; + compatible = "teejet,mt_ventoux", "ti,am3517", "ti,omap3"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 14bbc438055f..ca0aa3f26c0a 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -230,7 +230,6 @@ target-module@47810000 { compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mmc3"; reg = <0x478102fc 0x4>, <0x47810110 0x4>, <0x47810114 0x4>; @@ -351,20 +350,20 @@ }; }; - ocmcram: ocmcram@40300000 { + ocmcram: sram@40300000 { compatible = "mmio-sram"; reg = <0x40300000 0x40000>; /* 256k */ ranges = <0x0 0x40300000 0x40000>; #address-cells = <1>; #size-cells = <1>; - pm_sram_code: pm-sram-code@0 { + pm_sram_code: pm-code-sram@0 { compatible = "ti,sram"; reg = <0x0 0x1000>; protect-exec; }; - pm_sram_data: pm-sram-data@1000 { + pm_sram_data: pm-data-sram@1000 { compatible = "ti,sram"; reg = <0x1000 0x1000>; pool; @@ -375,3 +374,29 @@ #include "am437x-l4.dtsi" #include "am43xx-clocks.dtsi" + +&prcm { + prm_gfx: prm@400 { + compatible = "ti,am4-prm-inst", "ti,omap-prm-inst"; + reg = <0x400 0x100>; + #reset-cells = <1>; + }; + + prm_per: prm@800 { + compatible = "ti,am4-prm-inst", "ti,omap-prm-inst"; + reg = <0x800 0x100>; + #reset-cells = <1>; + }; + + prm_wkup: prm@2000 { + compatible = "ti,am4-prm-inst", "ti,omap-prm-inst"; + reg = <0x2000 0x100>; + #reset-cells = <1>; + }; + + prm_device: prm@4000 { + compatible = "ti,am4-prm-inst", "ti,omap-prm-inst"; + reg = <0x4000 0x100>; + #reset-cells = <1>; + }; +}; diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi index 59770dd3785e..0dd59ee14585 100644 --- a/arch/arm/boot/dts/am437x-l4.dtsi +++ b/arch/arm/boot/dts/am437x-l4.dtsi @@ -132,7 +132,6 @@ target-module@7000 { /* 0x44e07000, ap 14 20.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio1"; reg = <0x7000 0x4>, <0x7010 0x4>, <0x7114 0x4>; @@ -167,7 +166,6 @@ target-module@9000 { /* 0x44e09000, ap 16 04.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart1"; reg = <0x9050 0x4>, <0x9054 0x4>, <0x9058 0x4>; @@ -195,7 +193,6 @@ target-module@b000 { /* 0x44e0b000, ap 18 48.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c1"; reg = <0xb000 0x8>, <0xb010 0x8>, <0xb090 0x8>; @@ -373,7 +370,6 @@ target-module@35000 { /* 0x44e35000, ap 28 50.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "wd_timer2"; reg = <0x35000 0x4>, <0x35010 0x4>, <0x35014 0x4>; @@ -679,7 +675,6 @@ target-module@22000 { /* 0x48022000, ap 8 0a.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart2"; reg = <0x22050 0x4>, <0x22054 0x4>, <0x22058 0x4>; @@ -708,7 +703,6 @@ target-module@24000 { /* 0x48024000, ap 10 1c.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart3"; reg = <0x24050 0x4>, <0x24054 0x4>, <0x24058 0x4>; @@ -737,7 +731,6 @@ target-module@2a000 { /* 0x4802a000, ap 12 22.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c2"; reg = <0x2a000 0x8>, <0x2a010 0x8>, <0x2a090 0x8>; @@ -817,7 +810,6 @@ target-module@38000 { /* 0x48038000, ap 14 04.0 */ compatible = "ti,sysc-omap4-simple", "ti,sysc"; - ti,hwmods = "mcasp0"; reg = <0x38000 0x4>, <0x38004 0x4>; reg-names = "rev", "sysc"; @@ -849,7 +841,6 @@ target-module@3c000 { /* 0x4803c000, ap 16 2a.0 */ compatible = "ti,sysc-omap4-simple", "ti,sysc"; - ti,hwmods = "mcasp1"; reg = <0x3c000 0x4>, <0x3c004 0x4>; reg-names = "rev", "sysc"; @@ -1048,7 +1039,6 @@ target-module@4c000 { /* 0x4804c000, ap 28 36.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio2"; reg = <0x4c000 0x4>, <0x4c010 0x4>, <0x4c114 0x4>; @@ -1083,7 +1073,6 @@ target-module@60000 { /* 0x48060000, ap 30 14.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mmc1"; reg = <0x602fc 0x4>, <0x60110 0x4>, <0x60114 0x4>; @@ -1149,7 +1138,6 @@ target-module@c8000 { /* 0x480c8000, ap 73 06.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox"; reg = <0xc8000 0x4>, <0xc8010 0x4>; reg-names = "rev", "sysc"; @@ -1262,7 +1250,6 @@ target-module@9c000 { /* 0x4819c000, ap 38 52.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c3"; reg = <0x9c000 0x8>, <0x9c010 0x8>, <0x9c090 0x8>; @@ -1388,7 +1375,6 @@ target-module@a6000 { /* 0x481a6000, ap 40 16.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart4"; reg = <0xa6050 0x4>, <0xa6054 0x4>, <0xa6058 0x4>; @@ -1417,7 +1403,6 @@ target-module@a8000 { /* 0x481a8000, ap 42 20.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart5"; reg = <0xa8050 0x4>, <0xa8054 0x4>, <0xa8058 0x4>; @@ -1446,7 +1431,6 @@ target-module@aa000 { /* 0x481aa000, ap 44 12.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart6"; reg = <0xaa050 0x4>, <0xaa054 0x4>, <0xaa058 0x4>; @@ -1475,7 +1459,6 @@ target-module@ac000 { /* 0x481ac000, ap 46 30.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio3"; reg = <0xac000 0x4>, <0xac010 0x4>, <0xac114 0x4>; @@ -1510,7 +1493,6 @@ target-module@ae000 { /* 0x481ae000, ap 48 32.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio4"; reg = <0xae000 0x4>, <0xae010 0x4>, <0xae114 0x4>; @@ -1614,7 +1596,6 @@ target-module@d8000 { /* 0x481d8000, ap 54 5e.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mmc2"; reg = <0xd82fc 0x4>, <0xd8110 0x4>, <0xd8114 0x4>; @@ -1999,7 +1980,6 @@ target-module@10000 { /* 0x48310000, ap 64 4e.1 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "rng"; reg = <0x11fe0 0x4>, <0x11fe4 0x4>; reg-names = "rev", "sysc"; @@ -2038,7 +2018,6 @@ target-module@20000 { /* 0x48320000, ap 82 34.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio5"; reg = <0x20000 0x4>, <0x20010 0x4>, <0x20114 0x4>; @@ -2073,7 +2052,6 @@ target-module@22000 { /* 0x48322000, ap 116 64.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio6"; reg = <0x22000 0x4>, <0x22010 0x4>, <0x22114 0x4>; @@ -2296,7 +2274,6 @@ target-module@47000 { /* 0x48347000, ap 110 70.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "hdq1w"; reg = <0x47000 0x4>, <0x47014 0x4>, <0x47018 0x4>; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts index 7b113b52c3fb..39d1c4ff5749 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts @@ -24,7 +24,7 @@ }; &mmc2 { - pinctrl-names = "default", "hs", "ddr_1_8v"; + pinctrl-names = "default", "hs", "ddr_3_3v"; pinctrl-0 = <&mmc2_pins_default>; pinctrl-1 = <&mmc2_pins_hs>; pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts index 30c500b15b21..4187a9729f96 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts @@ -24,7 +24,7 @@ }; &mmc2 { - pinctrl-names = "default", "hs", "ddr_1_8v"; + pinctrl-names = "default", "hs", "ddr_3_3v"; pinctrl-0 = <&mmc2_pins_default>; pinctrl-1 = <&mmc2_pins_hs>; pinctrl-2 = <&mmc2_pins_ddr_rev20>; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 3f4bb44d85f0..e038abc0c6b4 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -103,6 +103,11 @@ #size-cells = <1>; ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; + sdramc: sdramc@1400 { + compatible = "marvell,armada-xp-sdram-controller"; + reg = <0x1400 0x500>; + }; + L2: cache-controller@8000 { compatible = "arm,pl310-cache"; reg = <0x8000 0x1000>; diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi index 267d0c178e55..654648b05c7c 100644 --- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi +++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi @@ -90,7 +90,7 @@ }; internal-regs { - sdramc@1400 { + sdramc: sdramc@1400 { compatible = "marvell,armada-xp-sdram-controller"; reg = <0x1400 0x500>; }; diff --git a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts index df048050615f..4ec0ae01b61d 100644 --- a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts +++ b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts @@ -33,6 +33,11 @@ }; }; +&L2 { + arm,parity-enable; + marvell,ecc-enable; +}; + &devbus_bootcs { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index ee15c77d3689..6c19984d668e 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -36,7 +36,7 @@ }; internal-regs { - sdramc@1400 { + sdramc: sdramc@1400 { compatible = "marvell,armada-xp-sdram-controller"; reg = <0x1400 0x500>; }; diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts index c9d88c90135e..8bec21ed0de5 100644 --- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts @@ -40,6 +40,7 @@ status = "okay"; m25p,fast-read; label = "bmc"; + spi-max-frequency = <50000000>; #include "openbmc-flash-layout.dtsi" }; }; @@ -50,6 +51,7 @@ status = "okay"; m25p,fast-read; label = "pnor"; + spi-max-frequency = <100000000>; }; }; diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts index 9870553919b7..4afa8662c4e8 100644 --- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts @@ -55,6 +55,9 @@ phy-mode = "rgmii"; phy-handle = <ðphy1>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default>; }; &mac2 { @@ -62,6 +65,9 @@ phy-mode = "rgmii"; phy-handle = <ðphy2>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii3_default>; }; &mac3 { @@ -69,12 +75,141 @@ phy-mode = "rgmii"; phy-handle = <ðphy3>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii4_default>; }; -&emmc { +&emmc_controller { status = "okay"; }; +&emmc { + non-removable; + bus-width = <4>; + max-frequency = <52000000>; +}; + &rtc { status = "okay"; }; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + u-boot@0 { + reg = <0x0 0xe0000>; // 896KB + label = "u-boot"; + }; + + u-boot-env@e0000 { + reg = <0xe0000 0x20000>; // 128KB + label = "u-boot-env"; + }; + + kernel@100000 { + reg = <0x100000 0x900000>; // 9MB + label = "kernel"; + }; + + rofs@a00000 { + reg = <0xa00000 0x2000000>; // 32MB + label = "rofs"; + }; + + rwfs@6000000 { + reg = <0x2a00000 0x1600000>; // 22MB + label = "rwfs"; + }; + }; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <100000000>; + }; +}; + +&uart5 { + // Workaround for A0 + compatible = "snps,dw-apb-uart"; +}; + +&i2c0 { + status = "okay"; + + temp@2e { + compatible = "adi,adt7490"; + reg = <0x2e>; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&i2c14 { + status = "okay"; +}; + +&i2c15 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts b/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts index 521afbea2c5b..2c29ac037d32 100644 --- a/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts +++ b/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts @@ -92,6 +92,9 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii2_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>, + <&syscon ASPEED_CLK_MAC2RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts index d519d307aa2a..016bbcb99bb6 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts @@ -2,7 +2,7 @@ // Copyright (c) 2018 Facebook Inc. /dts-v1/; -#include "aspeed-g5.dtsi" +#include "ast2500-facebook-netbmc-common.dtsi" / { model = "Facebook Backpack CMM BMC"; @@ -53,10 +53,6 @@ bootargs = "console=ttyS1,9600n8 root=/dev/ram rw earlyprintk"; }; - memory@80000000 { - reg = <0x80000000 0x20000000>; - }; - ast-adc-hwmon { compatible = "iio-hwmon"; io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, @@ -64,39 +60,7 @@ }; }; -&pinctrl { - aspeed,external-nodes = <&gfx &lhc>; -}; - -/* - * Update reset type to "system" (full chip) to fix warm reboot hang issue - * when reset type is set to default ("soc", gated by reset mask registers). - */ -&wdt1 { - status = "okay"; - aspeed,reset-type = "system"; -}; - -/* - * wdt2 is not used by Backpack CMM. - */ -&wdt2 { - status = "disabled"; -}; - -&fmc { - status = "okay"; - flash@0 { - status = "okay"; - m25p,fast-read; - label = "bmc"; -#include "facebook-bmc-flash-layout.dtsi" - }; -}; - &uart1 { - status = "okay"; - pinctrl-names = "default"; pinctrl-0 = <&pinctrl_txd1_default &pinctrl_rxd1_default &pinctrl_ncts1_default @@ -107,8 +71,6 @@ }; &uart3 { - status = "okay"; - pinctrl-names = "default"; pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default &pinctrl_ncts3_default @@ -123,17 +85,6 @@ &pinctrl_rxd4_default>; }; -&uart5 { - status = "okay"; -}; - -&mac1 { - status = "okay"; - no-hw-checksum; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; -}; - /* * I2C bus reserved for communication with COM-E. */ @@ -380,3 +331,18 @@ &ehci1 { status = "okay"; }; + +&vhub { + status = "disabled"; +}; + +&sdhci0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd1_default>; +}; + +&sdhci1 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts index c05478296446..88ce4ff9f47e 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts @@ -2,7 +2,7 @@ // Copyright (c) 2018 Facebook Inc. /dts-v1/; -#include "aspeed-g5.dtsi" +#include "ast2500-facebook-netbmc-common.dtsi" / { model = "Facebook Minipack 100 BMC"; @@ -76,35 +76,36 @@ stdout-path = &uart1; bootargs = "debug console=ttyS1,9600n8 root=/dev/ram rw"; }; - - memory@80000000 { - reg = <0x80000000 0x20000000>; - }; }; -&wdt1 { +&wdt2 { status = "okay"; aspeed,reset-type = "system"; }; -&wdt2 { - status = "okay"; - aspeed,reset-type = "system"; +/* + * Both firmware flashes are 64MB on Minipack BMC. + */ +&fmc_flash0 { + partitions { + data0@1c00000 { + reg = <0x1c00000 0x2400000>; + }; + flash0@0 { + reg = <0x0 0x4000000>; + }; + }; }; -&fmc { - status = "okay"; - flash@0 { - status = "okay"; - m25p,fast-read; - label = "bmc"; -#include "facebook-bmc-flash-layout.dtsi" +&fmc_flash1 { + partitions { + flash1@0 { + reg = <0x0 0x4000000>; + }; }; }; &uart1 { - status = "okay"; - pinctrl-names = "default"; pinctrl-0 = <&pinctrl_txd1_default &pinctrl_rxd1_default &pinctrl_ncts1_default @@ -120,13 +121,6 @@ &pinctrl_rxd2_default>; }; -&uart3 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_txd3_default - &pinctrl_rxd3_default>; -}; - &uart4 { status = "okay"; pinctrl-names = "default"; @@ -134,17 +128,6 @@ &pinctrl_rxd4_default>; }; -&uart5 { - status = "okay"; -}; - -&mac1 { - status = "okay"; - no-hw-checksum; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; -}; - &i2c0 { status = "okay"; bus-frequency = <400000>; @@ -423,7 +406,3 @@ &i2c13 { status = "okay"; }; - -&vhub { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts index 682f729ea25e..5d7cbd9164d4 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts @@ -126,6 +126,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts index 4e09a9cf32b7..52933598aac6 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts @@ -2,7 +2,7 @@ // Copyright (c) 2018 Facebook Inc. /dts-v1/; -#include "aspeed-g5.dtsi" +#include "ast2500-facebook-netbmc-common.dtsi" / { model = "Facebook YAMP 100 BMC"; @@ -23,47 +23,6 @@ stdout-path = &uart5; bootargs = "console=ttyS0,9600n8 root=/dev/ram rw"; }; - - memory@80000000 { - reg = <0x80000000 0x20000000>; - }; -}; - -&pinctrl { - aspeed,external-nodes = <&gfx &lhc>; -}; - -/* - * Update reset type to "system" (full chip) to fix warm reboot hang issue - * when reset type is set to default ("soc", gated by reset mask registers). - */ -&wdt1 { - status = "okay"; - aspeed,reset-type = "system"; -}; - -/* - * wdt2 is not used by Yamp. - */ -&wdt2 { - status = "disabled"; -}; - -&fmc { - status = "okay"; - flash@0 { - status = "okay"; - m25p,fast-read; - label = "bmc"; -#include "facebook-bmc-flash-layout.dtsi" - }; -}; - -&uart1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_txd1_default - &pinctrl_rxd1_default>; }; &uart2 { @@ -73,23 +32,19 @@ &pinctrl_rxd2_default>; }; -&uart3 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_txd3_default - &pinctrl_rxd3_default>; -}; - -&uart5 { - status = "okay"; -}; - &mac0 { status = "okay"; use-ncsi; no-hw-checksum; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; +}; + +&mac1 { + status = "disabled"; }; &i2c0 { @@ -154,7 +109,3 @@ &i2c13 { status = "okay"; }; - -&vhub { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts new file mode 100644 index 000000000000..c1c9cd30f980 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts @@ -0,0 +1,972 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2019 IBM Corp. +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Rainier"; + compatible = "ibm,rainier-bmc", "aspeed,ast2600"; + + aliases { + serial4 = &uart5; + }; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flash_memory: region@B8000000 { + no-map; + reg = <0xB8000000 0x04000000>; /* 64M */ + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + ps0-presence { + label = "ps0-presence"; + gpios = <&gpio0 ASPEED_GPIO(S, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(S, 0)>; + }; + + ps1-presence { + label = "ps1-presence"; + gpios = <&gpio0 ASPEED_GPIO(S, 1) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(S, 1)>; + }; + + ps2-presence { + label = "ps2-presence"; + gpios = <&gpio0 ASPEED_GPIO(S, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(S, 2)>; + }; + + ps3-presence { + label = "ps3-presence"; + gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(S, 3)>; + }; + }; + +}; + +&emmc_controller { + status = "okay"; +}; + +&emmc { + status = "okay"; +}; + +&ibt { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + power-supply@68 { + compatible = "ibm,cffps2"; + reg = <0x68>; + }; + + power-supply@69 { + compatible = "ibm,cffps2"; + reg = <0x69>; + }; + + power-supply@6a { + compatible = "ibm,cffps2"; + reg = <0x6a>; + }; + + power-supply@6b { + compatible = "ibm,cffps2"; + reg = <0x6b>; + }; +}; + +&i2c4 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@49 { + compatible = "ti,tmp275"; + reg = <0x49>; + }; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; +}; + +&i2c5 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@49 { + compatible = "ti,tmp275"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c6 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; + + tmp275@4b { + compatible = "ti,tmp275"; + reg = <0x4b>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; +}; + +&i2c7 { + status = "okay"; + + si7021-a20@20 { + compatible = "silabs,si7020"; + reg = <0x20>; + }; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + max31785@52 { + compatible = "maxim,max31785a"; + reg = <0x52>; + #address-cells = <1>; + #size-cells = <0>; + + fan@0 { + compatible = "pmbus-fan"; + reg = <0>; + tach-pulses = <2>; + }; + + fan@1 { + compatible = "pmbus-fan"; + reg = <1>; + tach-pulses = <2>; + }; + + fan@2 { + compatible = "pmbus-fan"; + reg = <2>; + tach-pulses = <2>; + }; + + fan@3 { + compatible = "pmbus-fan"; + reg = <3>; + tach-pulses = <2>; + }; + }; + + pca0: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + }; + + gpio@1 { + reg = <1>; + }; + + gpio@2 { + reg = <2>; + }; + + gpio@3 { + reg = <3>; + }; + + gpio@4 { + reg = <4>; + }; + + gpio@5 { + reg = <5>; + }; + + gpio@6 { + reg = <6>; + }; + + gpio@7 { + reg = <7>; + }; + + gpio@8 { + reg = <8>; + }; + + gpio@9 { + reg = <9>; + }; + + gpio@10 { + reg = <10>; + }; + + gpio@11 { + reg = <11>; + }; + + gpio@12 { + reg = <12>; + }; + + gpio@13 { + reg = <13>; + }; + + gpio@14 { + reg = <14>; + }; + + gpio@15 { + reg = <15>; + }; + }; + + dps: dps310@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c8 { + status = "okay"; + + ucd90320@b { + compatible = "ti,ucd90160"; + reg = <0x0b>; + }; + + ucd90320@c { + compatible = "ti,ucd90160"; + reg = <0x0c>; + }; + + ucd90320@11 { + compatible = "ti,ucd90160"; + reg = <0x11>; + }; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c9 { + status = "okay"; + + ir35221@42 { + compatible = "infineon,ir35221"; + reg = <0x42>; + }; + + ir35221@43 { + compatible = "infineon,ir35221"; + reg = <0x43>; + }; + + ir35221@44 { + compatible = "infineon,ir35221"; + reg = <0x44>; + }; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + tmp423b@4d { + compatible = "ti,tmp423"; + reg = <0x4d>; + }; + + ir35221@72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + }; + + ir35221@73 { + compatible = "infineon,ir35221"; + reg = <0x73>; + }; + + ir35221@74 { + compatible = "infineon,ir35221"; + reg = <0x74>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; +}; + +&i2c10 { + status = "okay"; + + ir35221@42 { + compatible = "infineon,ir35221"; + reg = <0x42>; + }; + + ir35221@43 { + compatible = "infineon,ir35221"; + reg = <0x43>; + }; + + ir35221@44 { + compatible = "infineon,ir35221"; + reg = <0x44>; + }; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + tmp423b@4d { + compatible = "ti,tmp423"; + reg = <0x4d>; + }; + + ir35221@72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + }; + + ir35221@73 { + compatible = "infineon,ir35221"; + reg = <0x73>; + }; + + ir35221@74 { + compatible = "infineon,ir35221"; + reg = <0x74>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; +}; + +&i2c11 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@49 { + compatible = "ti,tmp275"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&i2c14 { + status = "okay"; +}; + +&i2c15 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + power-supply@68 { + compatible = "ibm,cffps2"; + reg = <0x68>; + }; + + power-supply@69 { + compatible = "ibm,cffps2"; + reg = <0x69>; + }; + + power-supply@6a { + compatible = "ibm,cffps2"; + reg = <0x6a>; + }; + + power-supply@6b { + compatible = "ibm,cffps2"; + reg = <0x6b>; + }; +}; + +&i2c4 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@49 { + compatible = "ti,tmp275"; + reg = <0x49>; + }; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; +}; + +&i2c5 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@49 { + compatible = "ti,tmp275"; + reg = <0x49>; + }; +}; + +&i2c6 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; + + tmp275@4b { + compatible = "ti,tmp275"; + reg = <0x4b>; + }; +}; + +&i2c7 { + status = "okay"; + + si7021-a20@20 { + compatible = "silabs,si7020"; + reg = <0x20>; + }; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + max31785@52 { + compatible = "maxim,max31785a"; + reg = <0x52>; + #address-cells = <1>; + #size-cells = <0>; + + fan@0 { + compatible = "pmbus-fan"; + reg = <0>; + tach-pulses = <2>; + }; + + fan@1 { + compatible = "pmbus-fan"; + reg = <1>; + tach-pulses = <2>; + }; + + fan@2 { + compatible = "pmbus-fan"; + reg = <2>; + tach-pulses = <2>; + }; + + fan@3 { + compatible = "pmbus-fan"; + reg = <3>; + tach-pulses = <2>; + }; + }; + + pca0: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + }; + + gpio@1 { + reg = <1>; + }; + + gpio@2 { + reg = <2>; + }; + + gpio@3 { + reg = <3>; + }; + + gpio@4 { + reg = <4>; + }; + + gpio@5 { + reg = <5>; + }; + + gpio@6 { + reg = <6>; + }; + + gpio@7 { + reg = <7>; + }; + + gpio@8 { + reg = <8>; + }; + + gpio@9 { + reg = <9>; + }; + + gpio@10 { + reg = <10>; + }; + + gpio@11 { + reg = <11>; + }; + + gpio@12 { + reg = <12>; + }; + + gpio@13 { + reg = <13>; + }; + + gpio@14 { + reg = <14>; + }; + + gpio@15 { + reg = <15>; + }; + }; + + dps: dps310@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + }; +}; + +&i2c8 { + status = "okay"; + + ucd90320@b { + compatible = "ti,ucd90160"; + reg = <0x0b>; + }; + + ucd90320@c { + compatible = "ti,ucd90160"; + reg = <0x0c>; + }; + + ucd90320@11 { + compatible = "ti,ucd90160"; + reg = <0x11>; + }; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; +}; + +&i2c9 { + status = "okay"; + + ir35221@42 { + compatible = "infineon,ir35221"; + reg = <0x42>; + }; + + ir35221@43 { + compatible = "infineon,ir35221"; + reg = <0x43>; + }; + + ir35221@44 { + compatible = "infineon,ir35221"; + reg = <0x44>; + }; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + tmp423b@4d { + compatible = "ti,tmp423"; + reg = <0x4d>; + }; + + ir35221@72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + }; + + ir35221@73 { + compatible = "infineon,ir35221"; + reg = <0x73>; + }; + + ir35221@74 { + compatible = "infineon,ir35221"; + reg = <0x74>; + }; +}; + +&i2c10 { + status = "okay"; + + ir35221@42 { + compatible = "infineon,ir35221"; + reg = <0x42>; + }; + + ir35221@43 { + compatible = "infineon,ir35221"; + reg = <0x43>; + }; + + ir35221@44 { + compatible = "infineon,ir35221"; + reg = <0x44>; + }; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + tmp423b@4d { + compatible = "ti,tmp423"; + reg = <0x4d>; + }; + + ir35221@72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + }; + + ir35221@73 { + compatible = "infineon,ir35221"; + reg = <0x73>; + }; + + ir35221@74 { + compatible = "infineon,ir35221"; + reg = <0x74>; + }; +}; + +&i2c11 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@49 { + compatible = "ti,tmp275"; + reg = <0x49>; + }; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&i2c14 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&i2c15 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&vuart1 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; +}; + +&mac2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii3_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>, + <&syscon ASPEED_CLK_MAC3RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>, + <&syscon ASPEED_CLK_MAC4RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-128.dtsi" + }; + + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-max-frequency = <50000000>; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <100000000>; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts index e9d714a46a60..c17bb7fce7ff 100644 --- a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts +++ b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts @@ -148,14 +148,48 @@ }; leds { - compatible = "gpio-leds"; + compatible = "gpio-leds"; - power { - label = "power"; - /* TODO: dummy gpio */ - gpios = <&gpio ASPEED_GPIO(R, 1) GPIO_ACTIVE_LOW>; - }; + power { + label = "power"; + /* TODO: dummy gpio */ + gpios = <&gpio ASPEED_GPIO(R, 1) GPIO_ACTIVE_LOW>; + }; + + init-ok { + label = "init-ok"; + gpios = <&gpio ASPEED_GPIO(B, 7) GPIO_ACTIVE_LOW>; + }; + + front-memory { + label = "front-memory"; + gpios = <&gpio ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>; + }; + + front-syshot { + label = "front-syshot"; + gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>; + }; + + front-syshealth { + label = "front-syshealth"; + gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>; + }; + front-fan { + label = "front-fan"; + gpios = <&gpio ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>; + }; + + front-psu { + label = "front-psu"; + gpios = <&gpio ASPEED_GPIO(B, 2) GPIO_ACTIVE_LOW>; + }; + + identify { + label = "identify"; + gpios = <&gpio ASPEED_GPIO(Z, 7) GPIO_ACTIVE_LOW>; + }; }; iio-hwmon-battery { @@ -239,6 +273,9 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; @@ -749,15 +786,6 @@ aspeed,external-nodes = <&gfx &lhc>; }; -&gpio { - pin_gpio_b7 { - gpio-hog; - gpios = <ASPEED_GPIO(B,7) GPIO_ACTIVE_LOW>; - output-high; - line-name = "BMC_INIT_OK"; - }; -}; - &wdt1 { aspeed,reset-type = "none"; aspeed,external-signal; diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts index 2337ee23f5c4..80c92e065a10 100644 --- a/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts +++ b/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts @@ -77,6 +77,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts index 22dade6393d0..1deb30ec912c 100644 --- a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts +++ b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts @@ -69,6 +69,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts index d3695a32e8e0..c29e5f4d86ad 100644 --- a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts +++ b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts @@ -133,6 +133,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts index 118eb8bbbf1b..084c455ad4cb 100644 --- a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts +++ b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts @@ -139,6 +139,9 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts index de95112e2a04..42b37a204241 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts @@ -178,6 +178,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts index e55cc454b17f..f7e935ede919 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts @@ -449,6 +449,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts index b0cb34ccb135..eb4e93a57ff4 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts @@ -87,6 +87,7 @@ status = "okay"; m25p,fast-read; label = "bmc"; + spi-max-frequency = <50000000>; #include "openbmc-flash-layout.dtsi" }; }; @@ -99,6 +100,7 @@ flash@0 { status = "okay"; m25p,fast-read; + spi-max-frequency = <50000000>; label = "pnor"; }; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts index 9628ecb879cf..edfa44fe1f75 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts @@ -112,6 +112,7 @@ status = "okay"; m25p,fast-read; label = "bmc"; + spi-max-frequency = <50000000>; #include "openbmc-flash-layout.dtsi" }; }; @@ -125,6 +126,7 @@ status = "okay"; m25p,fast-read; label = "pnor"; + spi-max-frequency = <100000000>; }; }; @@ -160,6 +162,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; }; &i2c1 { diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts index f67fef1ac5e1..b8fdd2a8a2c9 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts @@ -322,6 +322,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; use-ncsi; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; }; &i2c2 { diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts new file mode 100644 index 000000000000..f02de4ab058c --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts @@ -0,0 +1,1195 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2019 IBM Corp. +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/leds/leds-pca955x.h> + +/ { + model = "Tacoma"; + compatible = "ibm,tacoma-bmc", "aspeed,ast2600"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flash_memory: region@ba000000 { + no-map; + reg = <0xb8000000 0x4000000>; /* 64M */ + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + air-water { + label = "air-water"; + gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(Q, 7)>; + }; + + checkstop { + label = "checkstop"; + gpios = <&gpio0 ASPEED_GPIO(E, 3) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(E, 3)>; + }; + + ps0-presence { + label = "ps0-presence"; + gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(H, 3)>; + }; + + ps1-presence { + label = "ps1-presence"; + gpios = <&gpio0 ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(E, 5)>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <1000>; + + fan0-presence { + label = "fan0-presence"; + gpios = <&pca0 4 GPIO_ACTIVE_LOW>; + linux,code = <4>; + }; + + fan1-presence { + label = "fan1-presence"; + gpios = <&pca0 5 GPIO_ACTIVE_LOW>; + linux,code = <5>; + }; + + fan2-presence { + label = "fan2-presence"; + gpios = <&pca0 6 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + fan3-presence { + label = "fan3-presence"; + gpios = <&pca0 7 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-128.dtsi" + }; + + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-max-frequency = <50000000>; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <100000000>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-128.dtsi" + }; + + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-max-frequency = <50000000>; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <100000000>; + }; +}; + +&mac2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii3_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>, + <&syscon ASPEED_CLK_MAC3RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&emmc { + status = "okay"; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam0_i2c0: i2c-bus@0 { + reg = <0>; + }; + + cfam0_i2c1: i2c-bus@1 { + reg = <1>; + }; + + cfam0_i2c2: i2c-bus@2 { + reg = <2>; + }; + + cfam0_i2c3: i2c-bus@3 { + reg = <3>; + }; + + cfam0_i2c4: i2c-bus@4 { + reg = <4>; + }; + + cfam0_i2c5: i2c-bus@5 { + reg = <5>; + }; + + cfam0_i2c6: i2c-bus@6 { + reg = <6>; + }; + + cfam0_i2c7: i2c-bus@7 { + reg = <7>; + }; + + cfam0_i2c8: i2c-bus@8 { + reg = <8>; + }; + + cfam0_i2c9: i2c-bus@9 { + reg = <9>; + }; + + cfam0_i2c10: i2c-bus@a { + reg = <10>; + }; + + cfam0_i2c11: i2c-bus@b { + reg = <11>; + }; + + cfam0_i2c12: i2c-bus@c { + reg = <12>; + }; + + cfam0_i2c13: i2c-bus@d { + reg = <13>; + }; + + cfam0_i2c14: i2c-bus@e { + reg = <14>; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ0: occ { + compatible = "ibm,p9-occ"; + }; + }; + + fsi_hub0: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; +}; + +&fsi_hub0 { + cfam@1,0 { + reg = <1 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <1>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam1_i2c0: i2c-bus@0 { + reg = <0>; + }; + + cfam1_i2c1: i2c-bus@1 { + reg = <1>; + }; + + cfam1_i2c2: i2c-bus@2 { + reg = <2>; + }; + + cfam1_i2c3: i2c-bus@3 { + reg = <3>; + }; + + cfam1_i2c4: i2c-bus@4 { + reg = <4>; + }; + + cfam1_i2c5: i2c-bus@5 { + reg = <5>; + }; + + cfam1_i2c6: i2c-bus@6 { + reg = <6>; + }; + + cfam1_i2c7: i2c-bus@7 { + reg = <7>; + }; + + cfam1_i2c8: i2c-bus@8 { + reg = <8>; + }; + + cfam1_i2c9: i2c-bus@9 { + reg = <9>; + }; + + cfam1_i2c10: i2c-bus@a { + reg = <10>; + }; + + cfam1_i2c11: i2c-bus@b { + reg = <11>; + }; + + cfam1_i2c12: i2c-bus@c { + reg = <12>; + }; + + cfam1_i2c13: i2c-bus@d { + reg = <13>; + }; + + cfam1_i2c14: i2c-bus@e { + reg = <14>; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ1: occ { + compatible = "ibm,p9-occ"; + }; + }; + + fsi_hub1: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; +}; + +/* Legacy OCC numbering (to get rid of when userspace is fixed) */ +&fsi_occ0 { + reg = <1>; +}; + +&fsi_occ1 { + reg = <2>; +}; + +/ { + aliases { + i2c100 = &cfam0_i2c0; + i2c101 = &cfam0_i2c1; + i2c102 = &cfam0_i2c2; + i2c103 = &cfam0_i2c3; + i2c104 = &cfam0_i2c4; + i2c105 = &cfam0_i2c5; + i2c106 = &cfam0_i2c6; + i2c107 = &cfam0_i2c7; + i2c108 = &cfam0_i2c8; + i2c109 = &cfam0_i2c9; + i2c110 = &cfam0_i2c10; + i2c111 = &cfam0_i2c11; + i2c112 = &cfam0_i2c12; + i2c113 = &cfam0_i2c13; + i2c114 = &cfam0_i2c14; + i2c200 = &cfam1_i2c0; + i2c201 = &cfam1_i2c1; + i2c202 = &cfam1_i2c2; + i2c203 = &cfam1_i2c3; + i2c204 = &cfam1_i2c4; + i2c205 = &cfam1_i2c5; + i2c206 = &cfam1_i2c6; + i2c207 = &cfam1_i2c7; + i2c208 = &cfam1_i2c8; + i2c209 = &cfam1_i2c9; + i2c210 = &cfam1_i2c10; + i2c211 = &cfam1_i2c11; + i2c212 = &cfam1_i2c12; + i2c213 = &cfam1_i2c13; + i2c214 = &cfam1_i2c14; + }; + +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + bmp: bmp280@77 { + compatible = "bosch,bmp280"; + reg = <0x77>; + #io-channel-cells = <1>; + }; + + max31785@52 { + compatible = "maxim,max31785a"; + reg = <0x52>; + #address-cells = <1>; + #size-cells = <0>; + + fan@0 { + compatible = "pmbus-fan"; + reg = <0>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@1 { + compatible = "pmbus-fan"; + reg = <1>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@2 { + compatible = "pmbus-fan"; + reg = <2>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@3 { + compatible = "pmbus-fan"; + reg = <3>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + }; + + dps: dps310@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + }; + + pca0: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + power-supply@68 { + compatible = "ibm,cffps1"; + reg = <0x68>; + }; + + power-supply@69 { + compatible = "ibm,cffps1"; + reg = <0x69>; + }; +}; + +&i2c4 { + status = "okay"; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221@70 { + compatible = "infineon,ir35221"; + reg = <0x70>; + }; + + ir35221@71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; +}; + +&i2c5 { + status = "okay"; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221@70 { + compatible = "infineon,ir35221"; + reg = <0x70>; + }; + + ir35221@71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; + + pca9552: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N", + "GPU0_TH_OVERT_N_BUFF", "GPU1_TH_OVERT_N_BUFF", + "GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF", + "GPU4_TH_OVERT_N_BUFF", "GPU5_TH_OVERT_N_BUFF", + "GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF", + "GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF", + "GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF", + "12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N"; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + ucd90160@64 { + compatible = "ti,ucd90160"; + reg = <0x64>; + }; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&ibt { + status = "okay"; +}; + +&uart1 { + status = "okay"; + // Workaround for A0 + compatible = "snps,dw-apb-uart"; +}; + +&uart5 { + // Workaround for A0 + compatible = "snps,dw-apb-uart"; +}; + +&vuart1 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&wdt2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + bmp: bmp280@77 { + compatible = "bosch,bmp280"; + reg = <0x77>; + #io-channel-cells = <1>; + }; + + max31785@52 { + compatible = "maxim,max31785a"; + reg = <0x52>; + #address-cells = <1>; + #size-cells = <0>; + + fan@0 { + compatible = "pmbus-fan"; + reg = <0>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@1 { + compatible = "pmbus-fan"; + reg = <1>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@2 { + compatible = "pmbus-fan"; + reg = <2>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@3 { + compatible = "pmbus-fan"; + reg = <3>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + }; + + dps: dps310@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + }; + + pca0: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + power-supply@68 { + compatible = "ibm,cffps1"; + reg = <0x68>; + }; + + power-supply@69 { + compatible = "ibm,cffps1"; + reg = <0x69>; + }; +}; + +&i2c4 { + status = "okay"; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221@70 { + compatible = "infineon,ir35221"; + reg = <0x70>; + }; + + ir35221@71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; +}; + +&i2c5 { + status = "okay"; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221@70 { + compatible = "infineon,ir35221"; + reg = <0x70>; + }; + + ir35221@71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; + + pca9552: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N", + "GPU0_TH_OVERT_N_BUFF", "GPU1_TH_OVERT_N_BUFF", + "GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF", + "GPU4_TH_OVERT_N_BUFF", "GPU5_TH_OVERT_N_BUFF", + "GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF", + "GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF", + "GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF", + "12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N"; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + ucd90160@64 { + compatible = "ti,ucd90160"; + reg = <0x64>; + }; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&pinctrl { + /* Hog these as no driver is probed for the entire LPC block */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpc_default>, + <&pinctrl_lsirq_default>; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts index a27c88d23056..affd2c8743b1 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts @@ -43,6 +43,10 @@ gpios = <&gpio ASPEED_GPIO(N, 1) GPIO_ACTIVE_LOW>; }; + power_green { + gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>; + }; + id_blue { gpios = <&gpio ASPEED_GPIO(O, 0) GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts index 31ea34e14c79..569dad93e162 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts @@ -200,6 +200,7 @@ status = "okay"; label = "bmc"; m25p,fast-read; + spi-max-frequency = <50000000>; partitions { #address-cells = < 1 >; @@ -224,6 +225,7 @@ status = "okay"; label = "alt-bmc"; m25p,fast-read; + spi-max-frequency = <50000000>; partitions { #address-cells = < 1 >; @@ -242,7 +244,6 @@ label = "alt-obmc-ubi"; }; }; - }; }; @@ -255,6 +256,7 @@ status = "okay"; label = "pnor"; m25p,fast-read; + spi-max-frequency = <100000000>; }; }; @@ -293,6 +295,9 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts index 30624378316d..bc60ec291681 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts @@ -130,6 +130,7 @@ status = "okay"; label = "bmc"; m25p,fast-read; + spi-max-frequency = <50000000>; #include "openbmc-flash-layout.dtsi" }; }; @@ -143,6 +144,7 @@ status = "okay"; label = "pnor"; m25p,fast-read; + spi-max-frequency = <100000000>; }; }; @@ -187,6 +189,9 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts index 33d704541de6..4a1ca8f5b6a7 100644 --- a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts +++ b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts @@ -80,12 +80,18 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default &pinctrl_mdio1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; }; &mac1 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii2_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>, + <&syscon ASPEED_CLK_MAC2RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index dffb595d30e4..46c0891aac5a 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -65,6 +65,7 @@ flash@0 { reg = < 0 >; compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; status = "disabled"; }; flash@1 { @@ -100,6 +101,7 @@ flash@0 { reg = < 0 >; compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; status = "disabled"; }; }; @@ -182,7 +184,7 @@ #reset-cells = <1>; pinctrl: pinctrl { - compatible = "aspeed,g4-pinctrl"; + compatible = "aspeed,ast2400-pinctrl"; }; p2a: p2a-control { diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index e8feb8b66a2f..a259c63fff06 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -72,16 +72,19 @@ flash@0 { reg = < 0 >; compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; status = "disabled"; }; flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; status = "disabled"; }; flash@2 { reg = < 2 >; compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; status = "disabled"; }; }; @@ -97,11 +100,13 @@ flash@0 { reg = < 0 >; compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; status = "disabled"; }; flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; status = "disabled"; }; }; @@ -117,11 +122,13 @@ flash@0 { reg = < 0 >; compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; status = "disabled"; }; flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; status = "disabled"; }; }; @@ -215,7 +222,7 @@ #reset-cells = <1>; pinctrl: pinctrl { - compatible = "aspeed,g5-pinctrl"; + compatible = "aspeed,ast2500-pinctrl"; aspeed,external-nodes = <&gfx &lhc>; }; @@ -299,7 +306,7 @@ #gpio-cells = <2>; gpio-controller; compatible = "aspeed,ast2500-gpio"; - reg = <0x1e780000 0x1000>; + reg = <0x1e780000 0x200>; interrupts = <20>; gpio-ranges = <&pinctrl 0 0 232>; clocks = <&syscon ASPEED_CLK_APB>; @@ -307,6 +314,21 @@ #interrupt-cells = <2>; }; + sgpio: sgpio@1e780200 { + #gpio-cells = <2>; + compatible = "aspeed,ast2500-sgpio"; + gpio-controller; + interrupts = <40>; + reg = <0x1e780200 0x0100>; + clocks = <&syscon ASPEED_CLK_APB>; + interrupt-controller; + ngpios = <8>; + bus-frequency = <12000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgpm_default>; + status = "disabled"; + }; + rtc: rtc@1e781000 { compatible = "aspeed,ast2500-rtc"; reg = <0x1e781000 0x18>; @@ -379,6 +401,7 @@ interrupts = <8>; clocks = <&syscon ASPEED_CLK_APB>; no-loopback-test; + aspeed,sirq-polarity-sense = <&syscon 0x70 25>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi index 5b8bf58e89cb..045ce66ca876 100644 --- a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi +++ b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi @@ -852,14 +852,9 @@ groups = "SD2"; }; - pinctrl_sd3_default: sd3_default { - function = "SD3"; - groups = "SD3"; - }; - pinctrl_emmc_default: emmc_default { - function = "SD3"; - groups = "EMMC"; + function = "EMMC"; + groups = "EMMCG4"; }; pinctrl_sgpm1_default: sgpm1_default { diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index 3a1422f7c49c..5f6142d99eeb 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -12,7 +12,29 @@ interrupt-parent = <&gic>; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c13 = &i2c13; + i2c14 = &i2c14; + i2c15 = &i2c15; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; serial4 = &uart5; + serial5 = &vuart1; + serial6 = &vuart2; }; @@ -64,12 +86,113 @@ <0x40466000 0x2000>; }; + fmc: spi@1e620000 { + reg = < 0x1e620000 0xc4 + 0x20000000 0x10000000 >; + #address-cells = <1>; + #size-cells = <0>; + compatible = "aspeed,ast2600-fmc"; + clocks = <&syscon ASPEED_CLK_AHB>; + status = "disabled"; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + flash@0 { + reg = < 0 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + flash@1 { + reg = < 1 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + flash@2 { + reg = < 2 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + }; + + spi1: spi@1e630000 { + reg = < 0x1e630000 0xc4 + 0x30000000 0x10000000 >; + #address-cells = <1>; + #size-cells = <0>; + compatible = "aspeed,ast2600-spi"; + clocks = <&syscon ASPEED_CLK_AHB>; + status = "disabled"; + flash@0 { + reg = < 0 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + flash@1 { + reg = < 1 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + }; + + spi2: spi@1e631000 { + reg = < 0x1e631000 0xc4 + 0x50000000 0x10000000 >; + #address-cells = <1>; + #size-cells = <0>; + compatible = "aspeed,ast2600-spi"; + clocks = <&syscon ASPEED_CLK_AHB>; + status = "disabled"; + flash@0 { + reg = < 0 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + flash@1 { + reg = < 1 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + flash@2 { + reg = < 2 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + + fsim0: fsi@1e79b000 { + compatible = "aspeed,ast2600-fsi-master", "fsi-master"; + reg = <0x1e79b000 0x94>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fsi1_default>; + clocks = <&syscon ASPEED_CLK_GATE_FSICLK>; + status = "disabled"; + }; + + fsim1: fsi@1e79b100 { + compatible = "aspeed,ast2600-fsi-master", "fsi-master"; + reg = <0x1e79b100 0x94>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fsi2_default>; + clocks = <&syscon ASPEED_CLK_GATE_FSICLK>; + status = "disabled"; + }; + }; + mdio0: mdio@1e650000 { compatible = "aspeed,ast2600-mdio"; reg = <0x1e650000 0x8>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mdio1_default>; }; mdio1: mdio@1e650008 { @@ -78,6 +201,8 @@ #address-cells = <1>; #size-cells = <0>; status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mdio2_default>; }; mdio2: mdio@1e650010 { @@ -86,6 +211,8 @@ #address-cells = <1>; #size-cells = <0>; status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mdio3_default>; }; mdio3: mdio@1e650018 { @@ -94,6 +221,8 @@ #address-cells = <1>; #size-cells = <0>; status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mdio4_default>; }; mac0: ftgmac@1e660000 { @@ -168,6 +297,32 @@ quality = <100>; }; + gpio0: gpio@1e780000 { + #gpio-cells = <2>; + gpio-controller; + compatible = "aspeed,ast2600-gpio"; + reg = <0x1e780000 0x800>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 0 208>; + ngpios = <208>; + clocks = <&syscon ASPEED_CLK_APB2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@1e780800 { + #gpio-cells = <2>; + gpio-controller; + compatible = "aspeed,ast2600-gpio"; + reg = <0x1e780800 0x800>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 208 36>; + ngpios = <36>; + clocks = <&syscon ASPEED_CLK_APB1>; + interrupt-controller; + #interrupt-cells = <2>; + }; + rtc: rtc@1e781000 { compatible = "aspeed,ast2600-rtc"; reg = <0x1e781000 0x18>; @@ -175,6 +330,35 @@ status = "disabled"; }; + timer: timer@1e782000 { + compatible = "aspeed,ast2600-timer"; + reg = <0x1e782000 0x90>; + interrupts-extended = <&gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_APB1>; + clock-names = "PCLK"; + }; + + uart1: serial@1e783000 { + compatible = "ns16550a"; + reg = <0x1e783000 0x20>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>; + resets = <&lpc_reset 4>; + no-loopback-test; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default &pinctrl_rxd1_default>; + status = "disabled"; + }; + uart5: serial@1e784000 { compatible = "ns16550a"; reg = <0x1e784000 0x1000>; @@ -207,6 +391,93 @@ status = "disabled"; }; + lpc: lpc@1e789000 { + compatible = "aspeed,ast2600-lpc", "simple-mfd"; + reg = <0x1e789000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e789000 0x1000>; + + lpc_bmc: lpc-bmc@0 { + compatible = "aspeed,ast2600-lpc-bmc", "simple-mfd", "syscon"; + reg = <0x0 0x80>; + reg-io-width = <4>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x80>; + + kcs1: kcs1@0 { + compatible = "aspeed,ast2600-kcs-bmc"; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + kcs_chan = <1>; + status = "disabled"; + }; + kcs2: kcs2@0 { + compatible = "aspeed,ast2600-kcs-bmc"; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + kcs_chan = <2>; + status = "disabled"; + }; + kcs3: kcs3@0 { + compatible = "aspeed,ast2600-kcs-bmc"; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + kcs_chan = <3>; + status = "disabled"; + }; + }; + + lpc_host: lpc-host@80 { + compatible = "aspeed,ast2600-lpc-host", "simple-mfd", "syscon"; + reg = <0x80 0x1e0>; + reg-io-width = <4>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80 0x1e0>; + + kcs4: kcs4@0 { + compatible = "aspeed,ast2600-kcs-bmc"; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + kcs_chan = <4>; + status = "disabled"; + }; + + lpc_ctrl: lpc-ctrl@0 { + compatible = "aspeed,ast2600-lpc-ctrl"; + reg = <0x0 0x80>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; + status = "disabled"; + }; + + lpc_snoop: lpc-snoop@0 { + compatible = "aspeed,ast2600-lpc-snoop"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + lhc: lhc@20 { + compatible = "aspeed,ast2600-lhc"; + reg = <0x20 0x24 0x48 0x8>; + }; + + lpc_reset: reset-controller@18 { + compatible = "aspeed,ast2600-lpc-reset"; + reg = <0x18 0x4>; + #reset-cells = <1>; + }; + + ibt: ibt@c0 { + compatible = "aspeed,ast2600-ibt-bmc"; + reg = <0xc0 0x18>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + }; + sdc: sdc@1e740000 { compatible = "aspeed,ast2600-sd-controller"; reg = <0x1e740000 0x100>; @@ -235,7 +506,7 @@ }; }; - emmc: sdc@1e750000 { + emmc_controller: sdc@1e750000 { compatible = "aspeed,ast2600-sd-controller"; reg = <0x1e750000 0x100>; #address-cells = <1>; @@ -244,7 +515,7 @@ clocks = <&syscon ASPEED_CLK_GATE_EMMCCLK>; status = "disabled"; - sdhci@1e750100 { + emmc: sdhci@1e750100 { compatible = "aspeed,ast2600-sdhci"; reg = <0x100 0x100>; sdhci,auto-cmd12; @@ -254,8 +525,320 @@ pinctrl-0 = <&pinctrl_emmc_default>; }; }; + + vuart1: serial@1e787000 { + compatible = "aspeed,ast2500-vuart"; + reg = <0x1e787000 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_APB1>; + no-loopback-test; + status = "disabled"; + }; + + vuart2: serial@1e788000 { + compatible = "aspeed,ast2500-vuart"; + reg = <0x1e788000 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_APB1>; + no-loopback-test; + status = "disabled"; + }; + + uart2: serial@1e78d000 { + compatible = "ns16550a"; + reg = <0x1e78d000 0x20>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>; + resets = <&lpc_reset 5>; + no-loopback-test; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; + status = "disabled"; + }; + + uart3: serial@1e78e000 { + compatible = "ns16550a"; + reg = <0x1e78e000 0x20>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>; + resets = <&lpc_reset 6>; + no-loopback-test; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>; + status = "disabled"; + }; + + uart4: serial@1e78f000 { + compatible = "ns16550a"; + reg = <0x1e78f000 0x20>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>; + resets = <&lpc_reset 7>; + no-loopback-test; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd4_default &pinctrl_rxd4_default>; + status = "disabled"; + }; + + i2c: bus@1e78a000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1e78a000 0x1000>; + }; + }; }; }; #include "aspeed-g6-pinctrl.dtsi" + +&i2c { + i2c0: i2c-bus@80 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x80 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_default>; + status = "disabled"; + }; + + i2c1: i2c-bus@100 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x100 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_default>; + status = "disabled"; + }; + + i2c2: i2c-bus@180 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x180 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_default>; + status = "disabled"; + }; + + i2c3: i2c-bus@200 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x200 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4_default>; + status = "disabled"; + }; + + i2c4: i2c-bus@280 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x280 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c5_default>; + status = "disabled"; + }; + + i2c5: i2c-bus@300 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x300 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c6_default>; + status = "disabled"; + }; + + i2c6: i2c-bus@380 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x380 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c7_default>; + status = "disabled"; + }; + + i2c7: i2c-bus@400 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x400 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c8_default>; + status = "disabled"; + }; + + i2c8: i2c-bus@480 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x480 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c9_default>; + status = "disabled"; + }; + + i2c9: i2c-bus@500 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x500 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c10_default>; + status = "disabled"; + }; + + i2c10: i2c-bus@580 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x580 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c11_default>; + status = "disabled"; + }; + + i2c11: i2c-bus@600 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x600 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c12_default>; + status = "disabled"; + }; + + i2c12: i2c-bus@680 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x680 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c13_default>; + status = "disabled"; + }; + + i2c13: i2c-bus@700 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x700 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c14_default>; + status = "disabled"; + }; + + i2c14: i2c-bus@780 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x780 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c15_default>; + status = "disabled"; + }; + + i2c15: i2c-bus@800 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x800 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c16_default>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi new file mode 100644 index 000000000000..7a395ba56512 --- /dev/null +++ b/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi @@ -0,0 +1,96 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2019 Facebook Inc. + +#include "aspeed-g5.dtsi" + +/ { + memory@80000000 { + reg = <0x80000000 0x40000000>; + }; +}; + +/* + * Update reset type to "system" (full chip) to fix warm reboot hang issue + * when reset type is set to default ("soc", gated by reset mask registers). + */ +&wdt1 { + status = "okay"; + aspeed,reset-type = "system"; +}; + +&wdt2 { + status = "disabled"; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default + &pinctrl_rxd3_default>; +}; + +&uart5 { + status = "okay"; +}; + +&fmc { + status = "okay"; + + fmc_flash0: flash@0 { + status = "okay"; + m25p,fast-read; + label = "spi0.0"; + +#include "facebook-bmc-flash-layout.dtsi" + }; + + fmc_flash1: flash@1 { + status = "okay"; + m25p,fast-read; + label = "spi0.1"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + flash1@0 { + reg = <0x0 0x2000000>; + label = "flash1"; + }; + }; + }; +}; + +&mac1 { + status = "okay"; + no-hw-checksum; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&rtc { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; + +&sdmmc { + status = "okay"; +}; + +&sdhci1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd2_default>; +}; diff --git a/arch/arm/boot/dts/at91-kizbox2-2.dts b/arch/arm/boot/dts/at91-kizbox2-2.dts new file mode 100644 index 000000000000..cab8b3579efa --- /dev/null +++ b/arch/arm/boot/dts/at91-kizbox2-2.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-kizbox2-2.dts - Device Tree file for the Kizbox2 with + * two head board + * + * Copyright (C) 2015 Overkiz SAS + * + * Authors: Antoine Aubert <a.aubert@overkiz.com> + * Kévin Raymond <k.raymond@overkiz.com> + */ +/dts-v1/; +#include "at91-kizbox2-common.dtsi" + +/ { + model = "Overkiz Kizbox 2 with two heads"; + compatible = "overkiz,kizbox2-2", "atmel,sama5d31", + "atmel,sama5d3", "atmel,sama5"; +}; + +&usart1 { + status = "okay"; +}; + +&usart2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/at91-kizbox2-common.dtsi new file mode 100644 index 000000000000..af38253a6e7a --- /dev/null +++ b/arch/arm/boot/dts/at91-kizbox2-common.dtsi @@ -0,0 +1,258 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-kizbox2_common.dtsi - Device Tree Include file for + * Overkiz Kizbox 2 family SoC + * + * Copyright (C) 2014-2018 Overkiz SAS + * + * Authors: Antoine Aubert <a.aubert@overkiz.com> + * Gaël Portay <g.portay@overkiz.com> + * Kévin Raymond <k.raymond@overkiz.com> + */ +#include "sama5d31.dtsi" + +/ { + chosen { + bootargs = "ubi.mtd=ubi"; + stdout-path = &dbgu; + }; + + memory { + reg = <0x20000000 0x10000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + prog { + label = "PB_PROG"; + gpios = <&pioE 27 GPIO_ACTIVE_LOW>; + linux,code = <0x102>; + wakeup-source; + }; + + reset { + label = "PB_RST"; + gpios = <&pioE 29 GPIO_ACTIVE_LOW>; + linux,code = <0x100>; + wakeup-source; + }; + + user { + label = "PB_USER"; + gpios = <&pioE 31 GPIO_ACTIVE_HIGH>; + linux,code = <0x101>; + wakeup-source; + }; + }; + + pwm_leds { + compatible = "pwm-leds"; + + blue { + label = "pwm:blue:user"; + pwms = <&pwm0 2 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "none"; + }; + + green { + label = "pwm:green:user"; + pwms = <&pwm0 1 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + + red { + label = "pwm:red:user"; + pwms = <&pwm0 0 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + }; +}; + +&i2c1 { + status = "okay"; + + pmic: act8865@5b { + compatible = "active-semi,act8865"; + reg = <0x5b>; + status = "okay"; + + regulators { + vcc_1v8_reg: DCDC_REG1 { + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc_1v2_reg: DCDC_REG2 { + regulator-name = "VCC_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vcc_3v3_reg: DCDC_REG3 { + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vddfuse_reg: LDO_REG1 { + regulator-name = "FUSE_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + vddana_reg: LDO_REG2 { + regulator-name = "VDDANA"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vled_reg: LDO_REG3 { + regulator-name = "VLED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + v3v8_rf_reg: LDO_REG4 { + regulator-name = "V3V8_RF"; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + regulator-always-on; + }; + }; + }; +}; + +&usart0 { + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; +}; + +&usart1 { + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; +}; + +&usart2 { + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; +}; + +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_pwmh0_1 + &pinctrl_pwm0_pwmh1_1 + &pinctrl_pwm0_pwmh2_0>; + status = "okay"; +}; + +&adc0 { + atmel,adc-vref = <3333>; + status = "okay"; +}; + +&macb1 { + phy-mode = "rmii"; + status = "okay"; +}; + +&dbgu { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&ebi { + pinctrl-0 = <&pinctrl_ebi_nand_addr>; + pinctrl-names = "default"; + status = "okay"; +}; + +&nand_controller { + status = "okay"; + + nand@3 { + reg = <0x3 0x0 0x2>; + atmel,rb = <0>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x20000>; + }; + + ubi@20000 { + label = "ubi"; + reg = <0x20000 0x7fe0000>; + }; + }; + }; +}; + +&usb1 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + +/* WMBUS (inverted with IO in the latest schematic) */ +&pinctrl_usart0 { + atmel,pins = + <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; +}; + +/* RTS */ +&pinctrl_usart1 { + atmel,pins = + <AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOE 7 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; +}; + +/* IO (inverted with WMBUS in the latest schematic) */ +&pinctrl_usart2 { + atmel,pins = + <AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_NONE + AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_PULL_UP + AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; +}; diff --git a/arch/arm/boot/dts/at91-kizbox2.dts b/arch/arm/boot/dts/at91-kizbox2.dts deleted file mode 100644 index 86d821884bd4..000000000000 --- a/arch/arm/boot/dts/at91-kizbox2.dts +++ /dev/null @@ -1,244 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * at91-kizbox2.dts - Device Tree file for Overkiz Kizbox 2 board - * - * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com> - */ -/dts-v1/; -#include "sama5d31.dtsi" -#include <dt-bindings/pwm/pwm.h> - -/ { - model = "Overkiz Kizbox 2"; - compatible = "overkiz,kizbox2", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; - - chosen { - bootargs = "ubi.mtd=ubi"; - stdout-path = &dbgu; - }; - - memory { - reg = <0x20000000 0x10000000>; - }; - - clocks { - slow_xtal { - clock-frequency = <32768>; - }; - - main_xtal { - clock-frequency = <12000000>; - }; - }; - - ahb { - apb { - i2c1: i2c@f0018000 { - status = "okay"; - - pmic: act8865@5b { - compatible = "active-semi,act8865"; - reg = <0x5b>; - status = "okay"; - - regulators { - vcc_1v8_reg: DCDC_REG1 { - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vcc_1v2_reg: DCDC_REG2 { - regulator-name = "VCC_1V2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - vcc_3v3_reg: DCDC_REG3 { - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vddfuse_reg: LDO_REG1 { - regulator-name = "FUSE_2V5"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - }; - - vddana_reg: LDO_REG2 { - regulator-name = "VDDANA"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vled_reg: LDO_REG3 { - regulator-name = "VLED"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - v3v8_rf_reg: LDO_REG4 { - regulator-name = "V3V8_RF"; - regulator-min-microvolt = <3800000>; - regulator-max-microvolt = <3800000>; - regulator-always-on; - }; - }; - }; - }; - - tcb0: timer@f0010000 { - timer@0 { - compatible = "atmel,tcb-timer"; - reg = <0>; - }; - - timer@1 { - compatible = "atmel,tcb-timer"; - reg = <1>; - }; - }; - - usart0: serial@f001c000 { - status = "okay"; - }; - - usart1: serial@f0020000 { - status = "okay"; - }; - - pwm0: pwm@f002c000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm0_pwmh0_1 - &pinctrl_pwm0_pwmh1_1 - &pinctrl_pwm0_pwmh2_0>; - status = "okay"; - }; - - adc0: adc@f8018000 { - atmel,adc-vref = <3333>; - status = "okay"; - }; - - usart2: serial@f8020000 { - status = "okay"; - }; - - macb1: ethernet@f802c000 { - phy-mode = "rmii"; - status = "okay"; - }; - - dbgu: serial@ffffee00 { - status = "okay"; - }; - - watchdog@fffffe40 { - status = "okay"; - }; - }; - - usb1: ohci@600000 { - status = "okay"; - }; - - usb2: ehci@700000 { - status = "okay"; - }; - - ebi: ebi@10000000 { - pinctrl-0 = <&pinctrl_ebi_nand_addr>; - pinctrl-names = "default"; - status = "okay"; - - nand_controller: nand-controller { - status = "okay"; - - nand@3 { - reg = <0x3 0x0 0x2>; - atmel,rb = <0>; - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - nand-on-flash-bbt; - label = "atmel_nand"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - bootstrap@0 { - label = "bootstrap"; - reg = <0x0 0x20000>; - }; - - ubi@20000 { - label = "ubi"; - reg = <0x20000 0x7fe0000>; - }; - }; - }; - }; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - prog { - label = "PB_PROG"; - gpios = <&pioE 27 GPIO_ACTIVE_LOW>; - linux,code = <0x102>; - wakeup-source; - }; - - reset { - label = "PB_RST"; - gpios = <&pioE 29 GPIO_ACTIVE_LOW>; - linux,code = <0x100>; - wakeup-source; - }; - - user { - label = "PB_USER"; - gpios = <&pioE 31 GPIO_ACTIVE_HIGH>; - linux,code = <0x101>; - wakeup-source; - }; - }; - - pwm_leds { - compatible = "pwm-leds"; - - blue { - label = "pwm:blue:user"; - pwms = <&pwm0 2 10000000 0>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - }; - - green { - label = "pwm:green:user"; - pwms = <&pwm0 1 10000000 0>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - }; - - red { - label = "pwm:red:user"; - pwms = <&pwm0 0 10000000 0>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - }; - }; -}; diff --git a/arch/arm/boot/dts/at91-kizbox3-hs.dts b/arch/arm/boot/dts/at91-kizbox3-hs.dts new file mode 100644 index 000000000000..8734e7f8939e --- /dev/null +++ b/arch/arm/boot/dts/at91-kizbox3-hs.dts @@ -0,0 +1,309 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-kizbox3-hs.dts - Device Tree file for Overkiz KIZBOX3-HS board + * + * Copyright (C) 2018 Overkiz SAS + * + * Authors: Dorian Rocipon <d.rocipon@overkiz.com> + * Kevin Carli <k.carli@overkiz.com> + * Mickael Gardet <m.gardet@overkiz.com> + */ +/dts-v1/; +#include "at91-kizbox3_common.dtsi" + +/ { + model = "Overkiz KIZBOX3-HS"; + compatible = "overkiz,kizbox3-hs", "atmel,sama5d2", "atmel,sama5"; + + pwm_leds { + status = "okay"; + + red { + status = "okay"; + }; + + green { + status = "okay"; + }; + + blue { + status = "okay"; + }; + + white { + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led_red + &pinctrl_led_white>; + status = "okay"; + + red { + label = "pio:red:user"; + gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + white { + label = "pio:white:user"; + gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default" , "default", "default", + "default", "default" ; + pinctrl-0 = <&pinctrl_key_gpio_default>; + pinctrl-1 = <&pinctrl_pio_rf &pinctrl_pio_wifi>; + pinctrl-2 = <&pinctrl_pio_io_boot + &pinctrl_pio_io_reset + &pinctrl_pio_io_test_radio>; + pinctrl-3 = <&pinctrl_pio_zbe_test_radio + &pinctrl_pio_zbe_rst>; + pinctrl-4 = <&pinctrl_pio_input>; + + SW1 { + label = "SW1"; + gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>; + linux,code = <0x101>; + wakeup-source; + }; + + SW2 { + label = "SW2"; + gpios = <&pioA PIN_PA18 GPIO_ACTIVE_LOW>; + linux,code = <0x102>; + wakeup-source; + }; + + SW3 { + label = "SW3"; + gpios = <&pioA PIN_PA22 GPIO_ACTIVE_LOW>; + linux,code = <0x103>; + wakeup-source; + }; + + SW7 { + label = "SW7"; + gpios = <&pioA PIN_PA26 GPIO_ACTIVE_LOW>; + linux,code = <0x107>; + wakeup-source; + }; + + SW8 { + label = "SW8"; + gpios = <&pioA PIN_PA24 GPIO_ACTIVE_LOW>; + linux,code = <0x108>; + wakeup-source; + }; + }; + + gpios { + compatible = "gpio"; + status = "okay"; + + rf_on { + label = "rf on"; + gpio = <&pioA PIN_PC19 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + wifi_on { + label = "wifi on"; + gpio = <&pioA PIN_PC20 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + zbe_test_radio { + label = "zbe test radio"; + gpio = <&pioA PIN_PB21 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + zbe_rst { + label = "zbe rst"; + gpio = <&pioA PIN_PB25 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + io_reset { + label = "io reset"; + gpio = <&pioA PIN_PB30 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + io_test_radio { + label = "io test radio"; + gpio = <&pioA PIN_PC9 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + io_boot_0 { + label = "io boot 0"; + gpio = <&pioA PIN_PC11 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + io_boot_1 { + label = "io boot 1"; + gpio = <&pioA PIN_PC17 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + verbose_bootloader { + label = "verbose bootloader"; + gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>; + input; + }; + + nail_bed_detection { + label = "nail bed detection"; + gpio = <&pioA PIN_PB12 GPIO_ACTIVE_HIGH>; + input; + }; + + id_usba { + label = "id usba"; + gpio = <&pioA PIN_PC0 GPIO_ACTIVE_LOW>; + input; + }; + }; +}; + +&pioA { + pinctrl_key_gpio_default: key_gpio_default { + pinmux= <PIN_PA22__GPIO>, + <PIN_PA24__GPIO>, + <PIN_PA26__GPIO>, + <PIN_PA29__GPIO>, + <PIN_PA18__GPIO>; + bias-disable; + }; + + pinctrl_gpio { + pinctrl_pio_rf: gpio_rf { + pinmux = <PIN_PC19__GPIO>; + bias-disable; + }; + pinctrl_pio_wifi: gpio_wifi { + pinmux = <PIN_PC20__GPIO>; + bias-disable; + }; + pinctrl_pio_io_boot: gpio_io_boot { + pinmux = + <PIN_PC11__GPIO>, + <PIN_PC17__GPIO>; + bias-disable; + }; + pinctrl_pio_io_test_radio: gpio_io_test_radio { + pinmux = <PIN_PC9__GPIO>; + bias-disable; + }; + pinctrl_pio_zbe_test_radio: gpio_zbe_test_radio { + pinmux = <PIN_PB21__GPIO>; + bias-disable; + }; + pinctrl_pio_zbe_rst: gpio_zbe_rst { + pinmux = <PIN_PB25__GPIO>; + bias-disable; + }; + /* stm32 reset must be open drain (internal pull up) */ + pinctrl_pio_io_reset: gpio_io_reset { + pinmux = <PIN_PB30__GPIO>; + bias-disable; + drive-open-drain = <1>; + output-low; + }; + pinctrl_pio_input: gpio_input { + pinmux = + <PIN_PB11__GPIO>, + <PIN_PB12__GPIO>, + <PIN_PC0__GPIO>; + bias-disable; + }; + }; + + pinctrl_leds { + pinctrl_led_red: led_red { + pinmux = <PIN_PB1__GPIO>; + bias-disable; + }; + pinctrl_led_white: led_white { + pinmux = <PIN_PB8__GPIO>; + bias-disable; + }; + }; +}; + +&adc { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&flx0 { + status = "okay"; + + uart5: serial@200 { + status = "okay"; + }; +}; + +&flx3 { + status = "okay"; + uart6: serial@200 { + status = "okay"; + }; +}; + +&flx4 { + status = "okay"; + + i2c2: i2c@600 { + status = "okay"; + }; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/at91-kizbox3_common.dtsi new file mode 100644 index 000000000000..299e74d23184 --- /dev/null +++ b/arch/arm/boot/dts/at91-kizbox3_common.dtsi @@ -0,0 +1,412 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-kizbox3.dts - Device Tree Include file for Overkiz Kizbox 3 + * family SoC boards + * + * Copyright (C) 2018 Overkiz SAS + * + * Authors: Dorian Rocipon <d.rocipon@overkiz.com> + * Kevin Carli <k.carli@overkiz.com> + * Mickael Gardet <m.gardet@overkiz.com> + */ +/dts-v1/; +#include "sama5d2.dtsi" +#include "sama5d2-pinfunc.h" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mfd/atmel-flexcom.h> +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "Overkiz Kizbox3"; + compatible = "overkiz,kizbox3", "atmel,sama5d2", "atmel,sama5"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + serial6 = &uart6; + }; + + chosen { + bootargs = "ubi.mtd=ubi"; + stdout-path = "serial1:115200n8"; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + vdd_adc_vddana: supply_3v3_ana { + compatible = "regulator-fixed"; + regulator-name = "adc-vddana"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_adc_vref: supply_3v3_ref { + compatible = "regulator-fixed"; + regulator-name = "adc-vref"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + pwm_leds { + compatible = "pwm-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_pwm_h0 + &pinctrl_pwm0_pwm_h1 + &pinctrl_pwm0_pwm_h2 + &pinctrl_pwm0_pwm_h3>; + status = "disabled"; + + red { + label = "pwm:red:user"; + pwms = <&pwm0 0 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + status = "disabled"; + }; + + green { + label = "pwm:green:user"; + pwms = <&pwm0 1 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + status = "disabled"; + }; + + blue { + label = "pwm:blue:user"; + pwms = <&pwm0 2 10000000 0>; + max-brightness = <255>; + status = "disabled"; + }; + + white { + label = "pwm:white:user"; + pwms = <&pwm0 3 10000000 0>; + max-brightness = <255>; + status = "disabled"; + }; + }; +}; + +&ebi { + status = "okay"; +}; + +&nand_controller { + status = "okay"; + + nand@3 { + pinctrl-0 = <&pinctrl_ebi_nand_addr>; + pinctrl-names = "default"; + reg = <0x3 0x0 0x800000>; + + atmel,rb = <0>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x20000>; + }; + + u-boot@20000 { + label = "u-boot"; + reg = <0x20000 0x140000>; + }; + + u-boot-factory@160000 { + label = "u-boot-factory"; + reg = <0x160000 0x140000>; + }; + + ubi@2A0000 { + label = "ubi"; + reg = <0x2A0000 0x7D60000>; + }; + }; + + }; +}; + +&rtc { + status = "okay"; +}; + +&pioA { + pinctrl_ebi_nand_addr: ebi-addr-1 { + pinmux = <PIN_PA0__D0>, + <PIN_PA1__D1>, + <PIN_PA2__D2>, + <PIN_PA3__D3>, + <PIN_PA4__D4>, + <PIN_PA5__D5>, + <PIN_PA6__D6>, + <PIN_PA7__D7>, + <PIN_PA8__NWE_NANDWE>, + <PIN_PA9__NCS3>, + <PIN_PA10__A21_NANDALE>, + <PIN_PA11__A22_NANDCLE>, + <PIN_PA21__NANDRDY>; + bias-disable; + }; + + pinctrl_usart { + pinctrl_usart_0: usart0-0 { + pinmux = < PIN_PB26__URXD0>, <PIN_PB27__UTXD0>; + bias-disable; + }; + pinctrl_usart_1: usart1-0 { + pinmux = < PIN_PD2__URXD1>, <PIN_PD3__UTXD1>; + bias-disable; + }; + pinctrl_usart_2: usart2-0 { + pinmux = < PIN_PD4__URXD2>, <PIN_PD5__UTXD2>; + bias-disable; + }; + pinctrl_usart_3: usart3-0 { + pinmux = < PIN_PC12__URXD3>, <PIN_PC13__UTXD3>; + bias-disable; + }; + pinctrl_usart_4: usart4-0 { + pinmux = < PIN_PB3__URXD4>, <PIN_PB4__UTXD4>; + bias-disable; + }; + pinctrl_flx0_default: flx0_usart_default { + pinmux = <PIN_PB28__FLEXCOM0_IO0>, //TX + <PIN_PB29__FLEXCOM0_IO1>; //RX + bias-disable; + }; + pinctrl_flx3_default: flx3_usart_default { + pinmux = <PIN_PB22__FLEXCOM3_IO1>, //RX + <PIN_PB23__FLEXCOM3_IO0>; //TX + bias-disable; + }; + }; + + pinctrl_flx4_default: flx4_i2c2_default { + pinmux = <PIN_PD12__FLEXCOM4_IO0>, //DATA + <PIN_PD13__FLEXCOM4_IO1>; //CLK + bias-disable; + drive-open-drain = <1>; + }; + + pinctrl_pwm0 { + pinctrl_pwm0_pwm_h0: pwm0_pwm_h0 { + pinmux = <PIN_PA30__PWMH0>; + bias-disable; + }; + pinctrl_pwm0_pwm_h1: pwm0_pwmh1 { + pinmux = <PIN_PB0__PWMH1>; + bias-disable; + }; + pinctrl_pwm0_pwm_h2: pwm0_pwm_h2 { + pinmux = <PIN_PB5__PWMH2>; + bias-disable; + }; + pinctrl_pwm0_pwm_h3: pwm0_pwm_h3 { + pinmux = <PIN_PB7__PWMH3>; + bias-disable; + }; + }; + + pinctrl_adc { + pinctrl_adc2: adc2 { + pinmux = <PIN_PD21__GPIO>; + bias-disable; + }; + pinctrl_adc3: adc3 { + pinmux = <PIN_PD22__GPIO>; + bias-disable; + }; + pinctrl_adc4: adc4 { + pinmux = <PIN_PD23__GPIO>; + bias-disable; + }; + pinctrl_adc5: adc5 { + pinmux = <PIN_PD24__GPIO>; + bias-disable; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart_0>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; +}; + +/* debug uart */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart_1>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart_2>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart_3>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart_4>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; +}; + +&flx0 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; + status = "disabled"; + + uart5: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x400>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(11))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(12))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; + clock-names = "usart"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx0_default>; + atmel,fifo-size = <32>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; +}; + +&flx3 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; + status = "disabled"; + + uart6: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x400>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(17))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(18))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; + clock-names = "usart"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx3_default>; + atmel,fifo-size = <32>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; +}; + +&flx4 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; + status = "disabled"; + + i2c2: i2c@600 { + compatible = "atmel,sama5d2-i2c"; + reg = <0x600 0x200>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(19))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(20))>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx4_default>; + atmel,fifo-size = <16>; + status = "disabled"; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&shutdown_controller { + atmel,shdwc-debouncer = <976>; + atmel,wakeup-rtc-timer; + + input@0 { + reg = <0>; + atmel,wakeup-type = "low"; + }; +}; + +&watchdog { + status = "okay"; +}; + +&adc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc2 + &pinctrl_adc3 + &pinctrl_adc4 + &pinctrl_adc5>; + + vddana-supply = <&vdd_adc_vddana>; + vref-supply = <&vdd_adc_vref>; + status = "disabled"; +}; + +&securam { + export; + + /* export overkiz u-boot mode/version and factory */ + uboot@1400 { + reg = <0x1400 0x20>; + export; + }; +}; diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts index 89f0c9979b89..fca5716ce44f 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts @@ -53,6 +53,7 @@ sdmmc0: sdio-host@a0000000 { bus-width = <8>; + mmc-ddr-3_3v; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sdmmc0_default>; status = "okay"; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 808e399fd39a..9d0a7fbea725 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -334,6 +334,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx4_default>; atmel,fifo-size = <16>; + i2c-analog-filter; + i2c-digital-filter; + i2c-digital-filter-width-ns = <35>; status = "okay"; }; }; @@ -342,6 +345,9 @@ dmas = <0>, <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1_default>; + i2c-analog-filter; + i2c-digital-filter; + i2c-digital-filter-width-ns = <35>; status = "okay"; at24@54 { diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index fdfc37d716e0..924d9491780d 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -49,6 +49,7 @@ }; i2c0: i2c@f8014000 { + i2c-digital-filter; status = "okay"; }; diff --git a/arch/arm/boot/dts/atlas7-evb.dts b/arch/arm/boot/dts/atlas7-evb.dts index e0c0291ac9fd..e0515043d145 100644 --- a/arch/arm/boot/dts/atlas7-evb.dts +++ b/arch/arm/boot/dts/atlas7-evb.dts @@ -119,7 +119,7 @@ label = "rearview key"; linux,code = <KEY_CAMERA>; gpios = <&gpio_1 3 GPIO_ACTIVE_LOW>; - debounce_interval = <100>; + debounce-interval = <100>; }; }; diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi index e4d49731287f..6142c672811e 100644 --- a/arch/arm/boot/dts/bcm-hr2.dtsi +++ b/arch/arm/boot/dts/bcm-hr2.dtsi @@ -268,7 +268,7 @@ clock-frequency = <100000>; }; - watchdog@39000 { + watchdog: watchdog@39000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x39000 0x1000>; interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts new file mode 100644 index 000000000000..1b5a835f66bd --- /dev/null +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -0,0 +1,140 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2711.dtsi" +#include "bcm2835-rpi.dtsi" +#include "bcm283x-rpi-usb-peripheral.dtsi" + +/ { + compatible = "raspberrypi,4-model-b", "brcm,bcm2711"; + model = "Raspberry Pi 4 Model B"; + + chosen { + /* 8250 auxiliary UART instead of pl011 */ + stdout-path = "serial1:115200n8"; + }; + + /* Will be filled by the bootloader */ + memory@0 { + device_type = "memory"; + reg = <0 0 0>; + }; + + aliases { + ethernet0 = &genet; + }; + + leds { + act { + gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; + }; + + pwr { + label = "PWR"; + gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; + }; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; + }; + + sd_io_1v8_reg: sd_io_1v8_reg { + compatible = "regulator-gpio"; + regulator-name = "vdd-sd-io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-settling-time-us = <5000>; + gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 + 3300000 0x0>; + status = "okay"; + }; +}; + +&firmware { + expgpio: gpio { + compatible = "raspberrypi,firmware-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "BT_ON", + "WL_ON", + "PWR_LED_OFF", + "GLOBAL_RESET", + "VDD_SD_IO_SEL", + "CAM_GPIO", + "", + ""; + status = "okay"; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>; + status = "okay"; +}; + +/* SDHCI is used to control the SDIO for wireless */ +&sdhci { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_gpio34>; + bus-width = <4>; + non-removable; + mmc-pwrseq = <&wifi_pwrseq>; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* EMMC2 is used to drive the SD card */ +&emmc2 { + vqmmc-supply = <&sd_io_1v8_reg>; + broken-cd; + status = "okay"; +}; + +&genet { + phy-handle = <&phy1>; + phy-mode = "rgmii-rxid"; + status = "okay"; +}; + +&genet_mdio { + phy1: ethernet-phy@1 { + /* No PHY interrupt */ + reg = <0x1>; + }; +}; + +/* uart0 communicates with the BT module */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <2000000>; + shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; + }; +}; + +/* uart1 is mapped to the pin header */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_gpio14>; + status = "okay"; +}; + +&vchiq { + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi new file mode 100644 index 000000000000..961bed832755 --- /dev/null +++ b/arch/arm/boot/dts/bcm2711.dtsi @@ -0,0 +1,890 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "bcm283x.dtsi" + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/bcm2835-pm.h> + +/ { + compatible = "brcm,bcm2711"; + + #address-cells = <2>; + #size-cells = <1>; + + interrupt-parent = <&gicv2>; + + reserved-memory { + #address-cells = <2>; + #size-cells = <1>; + ranges; + + /* + * arm64 reserves the CMA by default somewhere in ZONE_DMA32, + * that's not good enough for the BCM2711 as some devices can + * only address the lower 1G of memory (ZONE_DMA). + */ + linux,cma { + compatible = "shared-dma-pool"; + size = <0x2000000>; /* 32MB */ + alloc-ranges = <0x0 0x00000000 0x40000000>; + reusable; + linux,cma-default; + }; + }; + + + soc { + /* + * Defined ranges: + * Common BCM283x peripherals + * BCM2711-specific peripherals + * ARM-local peripherals + */ + ranges = <0x7e000000 0x0 0xfe000000 0x01800000>, + <0x7c000000 0x0 0xfc000000 0x02000000>, + <0x40000000 0x0 0xff800000 0x00800000>; + /* Emulate a contiguous 30-bit address range for DMA */ + dma-ranges = <0xc0000000 0x0 0x00000000 0x3c000000>; + + /* + * This node is the provider for the enable-method for + * bringing up secondary cores. + */ + local_intc: local_intc@40000000 { + compatible = "brcm,bcm2836-l1-intc"; + reg = <0x40000000 0x100>; + }; + + gicv2: interrupt-controller@40041000 { + interrupt-controller; + #interrupt-cells = <3>; + compatible = "arm,gic-400"; + reg = <0x40041000 0x1000>, + <0x40042000 0x2000>, + <0x40044000 0x2000>, + <0x40046000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + dma: dma@7e007000 { + compatible = "brcm,bcm2835-dma"; + reg = <0x7e007000 0xb00>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + /* DMA lite 7 - 10 */ + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dma0", + "dma1", + "dma2", + "dma3", + "dma4", + "dma5", + "dma6", + "dma7", + "dma8", + "dma9", + "dma10"; + #dma-cells = <1>; + brcm,dma-channel-mask = <0x07f5>; + }; + + pm: watchdog@7e100000 { + compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; + #power-domain-cells = <1>; + #reset-cells = <1>; + reg = <0x7e100000 0x114>, + <0x7e00a000 0x24>, + <0x7ec11000 0x20>; + clocks = <&clocks BCM2835_CLOCK_V3D>, + <&clocks BCM2835_CLOCK_PERI_IMAGE>, + <&clocks BCM2835_CLOCK_H264>, + <&clocks BCM2835_CLOCK_ISP>; + clock-names = "v3d", "peri_image", "h264", "isp"; + system-power-controller; + }; + + rng@7e104000 { + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + + /* RNG is incompatible with brcm,bcm2835-rng */ + status = "disabled"; + }; + + uart2: serial@7e201400 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x7e201400 0x200>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_UART>, + <&clocks BCM2835_CLOCK_VPU>; + clock-names = "uartclk", "apb_pclk"; + arm,primecell-periphid = <0x00241011>; + status = "disabled"; + }; + + uart3: serial@7e201600 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x7e201600 0x200>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_UART>, + <&clocks BCM2835_CLOCK_VPU>; + clock-names = "uartclk", "apb_pclk"; + arm,primecell-periphid = <0x00241011>; + status = "disabled"; + }; + + uart4: serial@7e201800 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x7e201800 0x200>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_UART>, + <&clocks BCM2835_CLOCK_VPU>; + clock-names = "uartclk", "apb_pclk"; + arm,primecell-periphid = <0x00241011>; + status = "disabled"; + }; + + uart5: serial@7e201a00 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x7e201a00 0x200>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_UART>, + <&clocks BCM2835_CLOCK_VPU>; + clock-names = "uartclk", "apb_pclk"; + arm,primecell-periphid = <0x00241011>; + status = "disabled"; + }; + + spi3: spi@7e204600 { + compatible = "brcm,bcm2835-spi"; + reg = <0x7e204600 0x0200>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@7e204800 { + compatible = "brcm,bcm2835-spi"; + reg = <0x7e204800 0x0200>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@7e204a00 { + compatible = "brcm,bcm2835-spi"; + reg = <0x7e204a00 0x0200>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi6: spi@7e204c00 { + compatible = "brcm,bcm2835-spi"; + reg = <0x7e204c00 0x0200>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@7e205600 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + reg = <0x7e205600 0x200>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@7e205800 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + reg = <0x7e205800 0x200>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@7e205a00 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + reg = <0x7e205a00 0x200>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@7e205c00 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + reg = <0x7e205c00 0x200>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pwm1: pwm@7e20c800 { + compatible = "brcm,bcm2835-pwm"; + reg = <0x7e20c800 0x28>; + clocks = <&clocks BCM2835_CLOCK_PWM>; + assigned-clocks = <&clocks BCM2835_CLOCK_PWM>; + assigned-clock-rates = <10000000>; + #pwm-cells = <2>; + status = "disabled"; + }; + + emmc2: emmc2@7e340000 { + compatible = "brcm,bcm2711-emmc2"; + reg = <0x7e340000 0x100>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2711_CLOCK_EMMC2>; + status = "disabled"; + }; + + hvs@7e400000 { + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a72-pmu", "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>; + /* This only applies to the ARMv7 stub */ + arm,cpu-registers-not-fw-configured; + }; + + cpus: cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x000000d8>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <1>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x000000e0>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <2>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x000000e8>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <3>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x000000f0>; + }; + }; + + scb { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0x0 0x7c000000 0x0 0xfc000000 0x03800000>; + + genet: ethernet@7d580000 { + compatible = "brcm,bcm2711-genet-v5"; + reg = <0x0 0x7d580000 0x10000>; + #address-cells = <0x1>; + #size-cells = <0x1>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + + genet_mdio: mdio@e14 { + compatible = "brcm,genet-mdio-v5"; + reg = <0xe14 0x8>; + reg-names = "mdio"; + #address-cells = <0x0>; + #size-cells = <0x1>; + }; + }; + }; +}; + +&clk_osc { + clock-frequency = <54000000>; +}; + +&clocks { + compatible = "brcm,bcm2711-cprman"; +}; + +&cpu_thermal { + coefficients = <(-487) 410040>; +}; + +&dsi0 { + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; +}; + +&dsi1 { + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio { + compatible = "brcm,bcm2711-gpio"; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + + gpclk0_gpio49: gpclk0_gpio49 { + pin-gpclk { + pins = "gpio49"; + function = "alt1"; + bias-disable; + }; + }; + gpclk1_gpio50: gpclk1_gpio50 { + pin-gpclk { + pins = "gpio50"; + function = "alt1"; + bias-disable; + }; + }; + gpclk2_gpio51: gpclk2_gpio51 { + pin-gpclk { + pins = "gpio51"; + function = "alt1"; + bias-disable; + }; + }; + + i2c0_gpio46: i2c0_gpio46 { + pin-sda { + function = "alt0"; + pins = "gpio46"; + bias-pull-up; + }; + pin-scl { + function = "alt0"; + pins = "gpio47"; + bias-disable; + }; + }; + i2c1_gpio46: i2c1_gpio46 { + pin-sda { + function = "alt1"; + pins = "gpio46"; + bias-pull-up; + }; + pin-scl { + function = "alt1"; + pins = "gpio47"; + bias-disable; + }; + }; + i2c3_gpio2: i2c3_gpio2 { + pin-sda { + function = "alt5"; + pins = "gpio2"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio3"; + bias-disable; + }; + }; + i2c3_gpio4: i2c3_gpio4 { + pin-sda { + function = "alt5"; + pins = "gpio4"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio5"; + bias-disable; + }; + }; + i2c4_gpio6: i2c4_gpio6 { + pin-sda { + function = "alt5"; + pins = "gpio6"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio7"; + bias-disable; + }; + }; + i2c4_gpio8: i2c4_gpio8 { + pin-sda { + function = "alt5"; + pins = "gpio8"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio9"; + bias-disable; + }; + }; + i2c5_gpio10: i2c5_gpio10 { + pin-sda { + function = "alt5"; + pins = "gpio10"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio11"; + bias-disable; + }; + }; + i2c5_gpio12: i2c5_gpio12 { + pin-sda { + function = "alt5"; + pins = "gpio12"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio13"; + bias-disable; + }; + }; + i2c6_gpio0: i2c6_gpio0 { + pin-sda { + function = "alt5"; + pins = "gpio0"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio1"; + bias-disable; + }; + }; + i2c6_gpio22: i2c6_gpio22 { + pin-sda { + function = "alt5"; + pins = "gpio22"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio23"; + bias-disable; + }; + }; + i2c_slave_gpio8: i2c_slave_gpio8 { + pins-i2c-slave { + pins = "gpio8", + "gpio9", + "gpio10", + "gpio11"; + function = "alt3"; + }; + }; + + jtag_gpio48: jtag_gpio48 { + pins-jtag { + pins = "gpio48", + "gpio49", + "gpio50", + "gpio51", + "gpio52", + "gpio53"; + function = "alt4"; + }; + }; + + mii_gpio28: mii_gpio28 { + pins-mii { + pins = "gpio28", + "gpio29", + "gpio30", + "gpio31"; + function = "alt4"; + }; + }; + mii_gpio36: mii_gpio36 { + pins-mii { + pins = "gpio36", + "gpio37", + "gpio38", + "gpio39"; + function = "alt5"; + }; + }; + + pcm_gpio50: pcm_gpio50 { + pins-pcm { + pins = "gpio50", + "gpio51", + "gpio52", + "gpio53"; + function = "alt2"; + }; + }; + + pwm0_0_gpio12: pwm0_0_gpio12 { + pin-pwm { + pins = "gpio12"; + function = "alt0"; + bias-disable; + }; + }; + pwm0_0_gpio18: pwm0_0_gpio18 { + pin-pwm { + pins = "gpio18"; + function = "alt5"; + bias-disable; + }; + }; + pwm1_0_gpio40: pwm1_0_gpio40 { + pin-pwm { + pins = "gpio40"; + function = "alt0"; + bias-disable; + }; + }; + pwm0_1_gpio13: pwm0_1_gpio13 { + pin-pwm { + pins = "gpio13"; + function = "alt0"; + bias-disable; + }; + }; + pwm0_1_gpio19: pwm0_1_gpio19 { + pin-pwm { + pins = "gpio19"; + function = "alt5"; + bias-disable; + }; + }; + pwm1_1_gpio41: pwm1_1_gpio41 { + pin-pwm { + pins = "gpio41"; + function = "alt0"; + bias-disable; + }; + }; + pwm0_1_gpio45: pwm0_1_gpio45 { + pin-pwm { + pins = "gpio45"; + function = "alt0"; + bias-disable; + }; + }; + pwm0_0_gpio52: pwm0_0_gpio52 { + pin-pwm { + pins = "gpio52"; + function = "alt1"; + bias-disable; + }; + }; + pwm0_1_gpio53: pwm0_1_gpio53 { + pin-pwm { + pins = "gpio53"; + function = "alt1"; + bias-disable; + }; + }; + + rgmii_gpio35: rgmii_gpio35 { + pin-start-stop { + pins = "gpio35"; + function = "alt4"; + }; + pin-rx-ok { + pins = "gpio36"; + function = "alt4"; + }; + }; + rgmii_irq_gpio34: rgmii_irq_gpio34 { + pin-irq { + pins = "gpio34"; + function = "alt5"; + }; + }; + rgmii_irq_gpio39: rgmii_irq_gpio39 { + pin-irq { + pins = "gpio39"; + function = "alt4"; + }; + }; + rgmii_mdio_gpio28: rgmii_mdio_gpio28 { + pins-mdio { + pins = "gpio28", + "gpio29"; + function = "alt5"; + }; + }; + rgmii_mdio_gpio37: rgmii_mdio_gpio37 { + pins-mdio { + pins = "gpio37", + "gpio38"; + function = "alt4"; + }; + }; + + spi0_gpio46: spi0_gpio46 { + pins-spi { + pins = "gpio46", + "gpio47", + "gpio48", + "gpio49"; + function = "alt2"; + }; + }; + spi2_gpio46: spi2_gpio46 { + pins-spi { + pins = "gpio46", + "gpio47", + "gpio48", + "gpio49", + "gpio50"; + function = "alt5"; + }; + }; + spi3_gpio0: spi3_gpio0 { + pins-spi { + pins = "gpio0", + "gpio1", + "gpio2", + "gpio3"; + function = "alt3"; + }; + }; + spi4_gpio4: spi4_gpio4 { + pins-spi { + pins = "gpio4", + "gpio5", + "gpio6", + "gpio7"; + function = "alt3"; + }; + }; + spi5_gpio12: spi5_gpio12 { + pins-spi { + pins = "gpio12", + "gpio13", + "gpio14", + "gpio15"; + function = "alt3"; + }; + }; + spi6_gpio18: spi6_gpio18 { + pins-spi { + pins = "gpio18", + "gpio19", + "gpio20", + "gpio21"; + function = "alt3"; + }; + }; + + uart2_gpio0: uart2_gpio0 { + pin-tx { + pins = "gpio0"; + function = "alt4"; + bias-disable; + }; + pin-rx { + pins = "gpio1"; + function = "alt4"; + bias-pull-up; + }; + }; + uart2_ctsrts_gpio2: uart2_ctsrts_gpio2 { + pin-cts { + pins = "gpio2"; + function = "alt4"; + bias-pull-up; + }; + pin-rts { + pins = "gpio3"; + function = "alt4"; + bias-disable; + }; + }; + uart3_gpio4: uart3_gpio4 { + pin-tx { + pins = "gpio4"; + function = "alt4"; + bias-disable; + }; + pin-rx { + pins = "gpio5"; + function = "alt4"; + bias-pull-up; + }; + }; + uart3_ctsrts_gpio6: uart3_ctsrts_gpio6 { + pin-cts { + pins = "gpio6"; + function = "alt4"; + bias-pull-up; + }; + pin-rts { + pins = "gpio7"; + function = "alt4"; + bias-disable; + }; + }; + uart4_gpio8: uart4_gpio8 { + pin-tx { + pins = "gpio8"; + function = "alt4"; + bias-disable; + }; + pin-rx { + pins = "gpio9"; + function = "alt4"; + bias-pull-up; + }; + }; + uart4_ctsrts_gpio10: uart4_ctsrts_gpio10 { + pin-cts { + pins = "gpio10"; + function = "alt4"; + bias-pull-up; + }; + pin-rts { + pins = "gpio11"; + function = "alt4"; + bias-disable; + }; + }; + uart5_gpio12: uart5_gpio12 { + pin-tx { + pins = "gpio12"; + function = "alt4"; + bias-disable; + }; + pin-rx { + pins = "gpio13"; + function = "alt4"; + bias-pull-up; + }; + }; + uart5_ctsrts_gpio14: uart5_ctsrts_gpio14 { + pin-cts { + pins = "gpio14"; + function = "alt4"; + bias-pull-up; + }; + pin-rts { + pins = "gpio15"; + function = "alt4"; + bias-disable; + }; + }; +}; + +&i2c0 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; +}; + +&i2c1 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; +}; + +&mailbox { + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; +}; + +&sdhci { + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; +}; + +&sdhost { + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; +}; + +&spi { + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; +}; + +&spi1 { + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; +}; + +&spi2 { + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; +}; + +&system_timer { + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; +}; + +&txp { + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; +}; + +&uart0 { + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; +}; + +&uart1 { + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; +}; + +&usb { + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; +}; + +&vec { + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/bcm2835-common.dtsi new file mode 100644 index 000000000000..fe1ab40c7f22 --- /dev/null +++ b/arch/arm/boot/dts/bcm2835-common.dtsi @@ -0,0 +1,194 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* This include file covers the common peripherals and configuration between + * bcm2835, bcm2836 and bcm2837 implementations. + */ + +/ { + interrupt-parent = <&intc>; + + soc { + dma: dma@7e007000 { + compatible = "brcm,bcm2835-dma"; + reg = <0x7e007000 0xf00>; + interrupts = <1 16>, + <1 17>, + <1 18>, + <1 19>, + <1 20>, + <1 21>, + <1 22>, + <1 23>, + <1 24>, + <1 25>, + <1 26>, + /* dma channel 11-14 share one irq */ + <1 27>, + <1 27>, + <1 27>, + <1 27>, + /* unused shared irq for all channels */ + <1 28>; + interrupt-names = "dma0", + "dma1", + "dma2", + "dma3", + "dma4", + "dma5", + "dma6", + "dma7", + "dma8", + "dma9", + "dma10", + "dma11", + "dma12", + "dma13", + "dma14", + "dma-shared-all"; + #dma-cells = <1>; + brcm,dma-channel-mask = <0x7f35>; + }; + + intc: interrupt-controller@7e00b200 { + compatible = "brcm,bcm2835-armctrl-ic"; + reg = <0x7e00b200 0x200>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pm: watchdog@7e100000 { + compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; + #power-domain-cells = <1>; + #reset-cells = <1>; + reg = <0x7e100000 0x114>, + <0x7e00a000 0x24>; + clocks = <&clocks BCM2835_CLOCK_V3D>, + <&clocks BCM2835_CLOCK_PERI_IMAGE>, + <&clocks BCM2835_CLOCK_H264>, + <&clocks BCM2835_CLOCK_ISP>; + clock-names = "v3d", "peri_image", "h264", "isp"; + system-power-controller; + }; + + pixelvalve@7e206000 { + compatible = "brcm,bcm2835-pixelvalve0"; + reg = <0x7e206000 0x100>; + interrupts = <2 13>; /* pwa0 */ + }; + + pixelvalve@7e207000 { + compatible = "brcm,bcm2835-pixelvalve1"; + reg = <0x7e207000 0x100>; + interrupts = <2 14>; /* pwa1 */ + }; + + thermal: thermal@7e212000 { + compatible = "brcm,bcm2835-thermal"; + reg = <0x7e212000 0x8>; + clocks = <&clocks BCM2835_CLOCK_TSENS>; + #thermal-sensor-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@7e805000 { + compatible = "brcm,bcm2835-i2c"; + reg = <0x7e805000 0x1000>; + interrupts = <2 21>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + }; + + pixelvalve@7e807000 { + compatible = "brcm,bcm2835-pixelvalve2"; + reg = <0x7e807000 0x100>; + interrupts = <2 10>; /* pixelvalve */ + }; + + hdmi: hdmi@7e902000 { + compatible = "brcm,bcm2835-hdmi"; + reg = <0x7e902000 0x600>, + <0x7e808000 0x100>; + interrupts = <2 8>, <2 9>; + ddc = <&i2c2>; + clocks = <&clocks BCM2835_PLLH_PIX>, + <&clocks BCM2835_CLOCK_HSM>; + clock-names = "pixel", "hdmi"; + dmas = <&dma 17>; + dma-names = "audio-rx"; + status = "disabled"; + }; + + v3d: v3d@7ec00000 { + compatible = "brcm,bcm2835-v3d"; + reg = <0x7ec00000 0x1000>; + interrupts = <1 10>; + power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; + }; + + vc4: gpu { + compatible = "brcm,bcm2835-vc4"; + }; + }; +}; + +&cpu_thermal { + thermal-sensors = <&thermal>; +}; + +&gpio { + i2c_slave_gpio18: i2c_slave_gpio18 { + brcm,pins = <18 19 20 21>; + brcm,function = <BCM2835_FSEL_ALT3>; + }; + + jtag_gpio4: jtag_gpio4 { + brcm,pins = <4 5 6 12 13>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + + pwm0_gpio12: pwm0_gpio12 { + brcm,pins = <12>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pwm0_gpio18: pwm0_gpio18 { + brcm,pins = <18>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + pwm0_gpio40: pwm0_gpio40 { + brcm,pins = <40>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pwm1_gpio13: pwm1_gpio13 { + brcm,pins = <13>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pwm1_gpio19: pwm1_gpio19 { + brcm,pins = <19>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + pwm1_gpio41: pwm1_gpio41 { + brcm,pins = <41>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pwm1_gpio45: pwm1_gpio45 { + brcm,pins = <45>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; +}; + +&i2s { + dmas = <&dma 2>, <&dma 3>; + dma-names = "tx", "rx"; +}; + +&sdhost { + dmas = <&dma 13>; + dma-names = "rx-tx"; +}; + +&spi { + dmas = <&dma 6>, <&dma 7>; + dma-names = "tx", "rx"; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index 6c6a7f620d8b..394c8a71b13b 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -59,10 +59,6 @@ clock-frequency = <100000>; }; -&i2c2 { - status = "okay"; -}; - &usb { power-domains = <&power RPI_POWER_DOMAIN_USB>; }; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index a5c3824c8056..53bf4579cc22 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include "bcm283x.dtsi" +#include "bcm2835-common.dtsi" / { compatible = "brcm,bcm2835"; diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi index c933e8413884..82d6c4662ae4 100644 --- a/arch/arm/boot/dts/bcm2836.dtsi +++ b/arch/arm/boot/dts/bcm2836.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include "bcm283x.dtsi" +#include "bcm2835-common.dtsi" / { compatible = "brcm,bcm2836"; diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi index beb6c502dadc..9e95fee78e19 100644 --- a/arch/arm/boot/dts/bcm2837.dtsi +++ b/arch/arm/boot/dts/bcm2837.dtsi @@ -1,4 +1,5 @@ #include "bcm283x.dtsi" +#include "bcm2835-common.dtsi" / { compatible = "brcm,bcm2837"; diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi new file mode 100644 index 000000000000..0ff0e9e25327 --- /dev/null +++ b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi @@ -0,0 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 +&usb { + dr_mode = "peripheral"; + g-rx-fifo-size = <256>; + g-np-tx-fifo-size = <32>; + g-tx-fifo-size = <256 256 512 512 512 768 768>; +}; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 2d191fcbc2cc..3caaa57eb6c8 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -18,7 +18,6 @@ / { compatible = "brcm,bcm2835"; model = "BCM2835"; - interrupt-parent = <&intc>; #address-cells = <1>; #size-cells = <1>; @@ -36,8 +35,6 @@ polling-delay-passive = <0>; polling-delay = <1000>; - thermal-sensors = <&thermal>; - trips { cpu-crit { temperature = <80000>; @@ -56,7 +53,7 @@ #address-cells = <1>; #size-cells = <1>; - timer@7e003000 { + system_timer: timer@7e003000 { compatible = "brcm,bcm2835-system-timer"; reg = <0x7e003000 0x1000>; interrupts = <1 0>, <1 1>, <1 2>, <1 3>; @@ -67,74 +64,12 @@ clock-frequency = <1000000>; }; - txp@7e004000 { + txp: txp@7e004000 { compatible = "brcm,bcm2835-txp"; reg = <0x7e004000 0x20>; interrupts = <1 11>; }; - dma: dma@7e007000 { - compatible = "brcm,bcm2835-dma"; - reg = <0x7e007000 0xf00>; - interrupts = <1 16>, - <1 17>, - <1 18>, - <1 19>, - <1 20>, - <1 21>, - <1 22>, - <1 23>, - <1 24>, - <1 25>, - <1 26>, - /* dma channel 11-14 share one irq */ - <1 27>, - <1 27>, - <1 27>, - <1 27>, - /* unused shared irq for all channels */ - <1 28>; - interrupt-names = "dma0", - "dma1", - "dma2", - "dma3", - "dma4", - "dma5", - "dma6", - "dma7", - "dma8", - "dma9", - "dma10", - "dma11", - "dma12", - "dma13", - "dma14", - "dma-shared-all"; - #dma-cells = <1>; - brcm,dma-channel-mask = <0x7f35>; - }; - - intc: interrupt-controller@7e00b200 { - compatible = "brcm,bcm2835-armctrl-ic"; - reg = <0x7e00b200 0x200>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pm: watchdog@7e100000 { - compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; - #power-domain-cells = <1>; - #reset-cells = <1>; - reg = <0x7e100000 0x114>, - <0x7e00a000 0x24>; - clocks = <&clocks BCM2835_CLOCK_V3D>, - <&clocks BCM2835_CLOCK_PERI_IMAGE>, - <&clocks BCM2835_CLOCK_H264>, - <&clocks BCM2835_CLOCK_ISP>; - clock-names = "v3d", "peri_image", "h264", "isp"; - system-power-controller; - }; - clocks: cprman@7e101000 { compatible = "brcm,bcm2835-cprman"; #clock-cells = <1>; @@ -184,8 +119,7 @@ interrupt-controller; #interrupt-cells = <2>; - /* Defines pin muxing groups according to - * BCM2835-ARM-Peripherals.pdf page 102. + /* Defines common pin muxing groups * * While each pin can have its mux selected * for various functions individually, some @@ -263,15 +197,7 @@ brcm,pins = <44 45>; brcm,function = <BCM2835_FSEL_ALT2>; }; - i2c_slave_gpio18: i2c_slave_gpio18 { - brcm,pins = <18 19 20 21>; - brcm,function = <BCM2835_FSEL_ALT3>; - }; - jtag_gpio4: jtag_gpio4 { - brcm,pins = <4 5 6 12 13>; - brcm,function = <BCM2835_FSEL_ALT5>; - }; jtag_gpio22: jtag_gpio22 { brcm,pins = <22 23 24 25 26 27>; brcm,function = <BCM2835_FSEL_ALT4>; @@ -286,35 +212,6 @@ brcm,function = <BCM2835_FSEL_ALT2>; }; - pwm0_gpio12: pwm0_gpio12 { - brcm,pins = <12>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - pwm0_gpio18: pwm0_gpio18 { - brcm,pins = <18>; - brcm,function = <BCM2835_FSEL_ALT5>; - }; - pwm0_gpio40: pwm0_gpio40 { - brcm,pins = <40>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - pwm1_gpio13: pwm1_gpio13 { - brcm,pins = <13>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - pwm1_gpio19: pwm1_gpio19 { - brcm,pins = <19>; - brcm,function = <BCM2835_FSEL_ALT5>; - }; - pwm1_gpio41: pwm1_gpio41 { - brcm,pins = <41>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - pwm1_gpio45: pwm1_gpio45 { - brcm,pins = <45>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - sdhost_gpio48: sdhost_gpio48 { brcm,pins = <48 49 50 51 52 53>; brcm,function = <BCM2835_FSEL_ALT0>; @@ -396,7 +293,7 @@ }; uart0: serial@7e201000 { - compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; + compatible = "arm,pl011", "arm,primecell"; reg = <0x7e201000 0x200>; interrupts = <2 25>; clocks = <&clocks BCM2835_CLOCK_UART>, @@ -410,8 +307,6 @@ reg = <0x7e202000 0x100>; interrupts = <2 24>; clocks = <&clocks BCM2835_CLOCK_VPU>; - dmas = <&dma 13>; - dma-names = "rx-tx"; status = "disabled"; }; @@ -419,10 +314,6 @@ compatible = "brcm,bcm2835-i2s"; reg = <0x7e203000 0x24>; clocks = <&clocks BCM2835_CLOCK_PCM>; - - dmas = <&dma 2>, - <&dma 3>; - dma-names = "tx", "rx"; status = "disabled"; }; @@ -431,8 +322,6 @@ reg = <0x7e204000 0x200>; interrupts = <2 22>; clocks = <&clocks BCM2835_CLOCK_VPU>; - dmas = <&dma 6>, <&dma 7>; - dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -448,18 +337,6 @@ status = "disabled"; }; - pixelvalve@7e206000 { - compatible = "brcm,bcm2835-pixelvalve0"; - reg = <0x7e206000 0x100>; - interrupts = <2 13>; /* pwa0 */ - }; - - pixelvalve@7e207000 { - compatible = "brcm,bcm2835-pixelvalve1"; - reg = <0x7e207000 0x100>; - interrupts = <2 14>; /* pwa1 */ - }; - dpi: dpi@7e208000 { compatible = "brcm,bcm2835-dpi"; reg = <0x7e208000 0x8c>; @@ -490,14 +367,6 @@ }; - thermal: thermal@7e212000 { - compatible = "brcm,bcm2835-thermal"; - reg = <0x7e212000 0x8>; - clocks = <&clocks BCM2835_CLOCK_TSENS>; - #thermal-sensor-cells = <0>; - status = "disabled"; - }; - aux: aux@7e215000 { compatible = "brcm,bcm2835-aux"; #clock-cells = <1>; @@ -587,16 +456,6 @@ status = "disabled"; }; - i2c2: i2c@7e805000 { - compatible = "brcm,bcm2835-i2c"; - reg = <0x7e805000 0x1000>; - interrupts = <2 21>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - vec: vec@7e806000 { compatible = "brcm,bcm2835-vec"; reg = <0x7e806000 0x1000>; @@ -605,26 +464,6 @@ status = "disabled"; }; - pixelvalve@7e807000 { - compatible = "brcm,bcm2835-pixelvalve2"; - reg = <0x7e807000 0x100>; - interrupts = <2 10>; /* pixelvalve */ - }; - - hdmi: hdmi@7e902000 { - compatible = "brcm,bcm2835-hdmi"; - reg = <0x7e902000 0x600>, - <0x7e808000 0x100>; - interrupts = <2 8>, <2 9>; - ddc = <&i2c2>; - clocks = <&clocks BCM2835_PLLH_PIX>, - <&clocks BCM2835_CLOCK_HSM>; - clock-names = "pixel", "hdmi"; - dmas = <&dma 17>; - dma-names = "audio-rx"; - status = "disabled"; - }; - usb: usb@7e980000 { compatible = "brcm,bcm2835-usb"; reg = <0x7e980000 0x10000>; @@ -636,36 +475,19 @@ phys = <&usbphy>; phy-names = "usb2-phy"; }; - - v3d: v3d@7ec00000 { - compatible = "brcm,bcm2835-v3d"; - reg = <0x7ec00000 0x1000>; - interrupts = <1 10>; - power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; - }; - - vc4: gpu { - compatible = "brcm,bcm2835-vc4"; - }; }; clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - /* The oscillator is the root of the clock tree. */ - clk_osc: clock@3 { + clk_osc: clk-osc { compatible = "fixed-clock"; - reg = <3>; #clock-cells = <0>; clock-output-names = "osc"; clock-frequency = <19200000>; }; - clk_usb: clock@4 { + clk_usb: clk-usb { compatible = "fixed-clock"; - reg = <4>; #clock-cells = <0>; clock-output-names = "otg"; clock-frequency = <480000000>; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts new file mode 100644 index 000000000000..334325390aed --- /dev/null +++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2019 Legrand AV Inc. + */ + +/dts-v1/; + +#include "bcm47094.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "luxul,xwc-2000-v1", "brcm,bcm47094", "brcm,bcm4708"; + model = "Luxul XWC-2000 V1"; + + chosen { + bootargs = "earlycon"; + }; + + memory { + reg = <0x00000000 0x08000000 + 0x88000000 0x18000000>; + }; + + leds { + compatible = "gpio-leds"; + + status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart1 { + status = "okay"; +}; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 2e8a3977219f..3081b04e8c08 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -784,7 +784,7 @@ status = "disabled"; }; - crypto_sram: sa-sram@ffffe000 { + crypto_sram: sram@ffffe000 { compatible = "mmio-sram"; reg = <0xffffe000 0x800>; clocks = <&gate_clk 15>; diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index 37e048771b0f..7e7aa101d8a4 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -442,7 +442,6 @@ target-module@f4000 { /* 0x4a0f4000, ap 23 04.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox1"; reg = <0xf4000 0x4>, <0xf4010 0x4>; reg-names = "rev", "sysc"; @@ -1899,7 +1898,6 @@ target-module@90000 { /* 0x48090000, ap 55 12.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "rng"; reg = <0x91fe0 0x4>, <0x91fe4 0x4>; reg-names = "rev", "sysc"; @@ -2090,7 +2088,6 @@ target-module@b2000 { /* 0x480b2000, ap 37 52.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "hdq1w"; reg = <0xb2000 0x4>, <0xb2014 0x4>, <0xb2018 0x4>; @@ -3059,7 +3056,7 @@ davinci_mdio: mdio@1000 { compatible = "ti,cpsw-mdio","ti,davinci_mdio"; - clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 0>; + clocks = <&gmac_main_clk>; clock-names = "fck"; #address-cells = <1>; #size-cells = <0>; @@ -3251,7 +3248,6 @@ target-module@2000 { /* 0x48802000, ap 95 7c.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox13"; reg = <0x2000 0x4>, <0x2010 0x4>; reg-names = "rev", "sysc"; @@ -3580,7 +3576,6 @@ target-module@3a000 { /* 0x4883a000, ap 33 3e.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox2"; reg = <0x3a000 0x4>, <0x3a010 0x4>; reg-names = "rev", "sysc"; @@ -3611,7 +3606,6 @@ target-module@3c000 { /* 0x4883c000, ap 35 3a.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox3"; reg = <0x3c000 0x4>, <0x3c010 0x4>; reg-names = "rev", "sysc"; @@ -3642,7 +3636,6 @@ target-module@3e000 { /* 0x4883e000, ap 37 46.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox4"; reg = <0x3e000 0x4>, <0x3e010 0x4>; reg-names = "rev", "sysc"; @@ -3673,7 +3666,6 @@ target-module@40000 { /* 0x48840000, ap 39 64.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox5"; reg = <0x40000 0x4>, <0x40010 0x4>; reg-names = "rev", "sysc"; @@ -3704,7 +3696,6 @@ target-module@42000 { /* 0x48842000, ap 41 4e.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox6"; reg = <0x42000 0x4>, <0x42010 0x4>; reg-names = "rev", "sysc"; @@ -3735,7 +3726,6 @@ target-module@44000 { /* 0x48844000, ap 43 42.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox7"; reg = <0x44000 0x4>, <0x44010 0x4>; reg-names = "rev", "sysc"; @@ -3766,7 +3756,6 @@ target-module@46000 { /* 0x48846000, ap 45 48.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox8"; reg = <0x46000 0x4>, <0x46010 0x4>; reg-names = "rev", "sysc"; @@ -3885,7 +3874,6 @@ target-module@5e000 { /* 0x4885e000, ap 69 6c.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox9"; reg = <0x5e000 0x4>, <0x5e010 0x4>; reg-names = "rev", "sysc"; @@ -3916,7 +3904,6 @@ target-module@60000 { /* 0x48860000, ap 71 4a.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox10"; reg = <0x60000 0x4>, <0x60010 0x4>; reg-names = "rev", "sysc"; @@ -3947,7 +3934,6 @@ target-module@62000 { /* 0x48862000, ap 73 74.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox11"; reg = <0x62000 0x4>, <0x62010 0x4>; reg-names = "rev", "sysc"; @@ -3978,7 +3964,6 @@ target-module@64000 { /* 0x48864000, ap 67 52.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox12"; reg = <0x64000 0x4>, <0x64010 0x4>; reg-names = "rev", "sysc"; @@ -4353,7 +4338,6 @@ target-module@4000 { /* 0x4ae14000, ap 7 28.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "wd_timer2"; reg = <0x4000 0x4>, <0x4010 0x4>, <0x4014 0x4>; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 953f0ffce2a9..73e5011f531a 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -763,3 +763,54 @@ #include "dra7-l4.dtsi" #include "dra7xx-clocks.dtsi" + +&prm { + prm_dsp1: prm@400 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x400 0x100>; + #reset-cells = <1>; + }; + + prm_ipu: prm@500 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x500 0x100>; + #reset-cells = <1>; + }; + + prm_core: prm@700 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x700 0x100>; + #reset-cells = <1>; + }; + + prm_iva: prm@f00 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0xf00 0x100>; + }; + + prm_dsp2: prm@1b00 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1b00 0x40>; + #reset-cells = <1>; + }; + + prm_eve1: prm@1b40 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1b40 0x40>; + }; + + prm_eve2: prm@1b80 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1b80 0x40>; + }; + + prm_eve3: prm@1bc0 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1bc0 0x40>; + }; + + prm_eve4: prm@1c00 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1c00 0x60>; + }; +}; diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi new file mode 100644 index 000000000000..6472b056a001 --- /dev/null +++ b/arch/arm/boot/dts/e60k02.dtsi @@ -0,0 +1,306 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Andreas Kemnade + * based on works + * Copyright 2016 Freescale Semiconductor, Inc. + * and + * Copyright (C) 2014 Ricoh Electronic Devices Co., Ltd + * + * Netronix E60K02 board common. + * This board is equipped with different SoCs and + * found in ebook-readers like the Kobo Clara HD (with i.MX6SLL) and + * the Tolino Shine 3 (with i.MX6SL) + */ +#include <dt-bindings/input/input.h> + +/ { + + chosen { + stdout-path = &uart1; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + + cover { + label = "Cover"; + gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; + linux,code = <SW_LID>; + linux,input-type = <EV_SW>; + wakeup-source; + }; + }; + + leds: leds { + compatible = "gpio-leds"; + + on { + label = "e60k02:white:on"; + gpios = <&gpio5 7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; + + memory { + reg = <0x80000000 0x20000000>; + }; + + reg_wifi: regulator-wifi { + compatible = "regulator-fixed"; + regulator-name = "SD3_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + post-power-on-delay-ms = <20>; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + }; +}; + + +&i2c1 { + clock-frequency = <100000>; + status = "okay"; + + lm3630a: backlight@36 { + reg = <0x36>; + compatible = "ti,lm3630a"; + enable-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + led-sources = <0>; + label = "backlight_warm"; + default-brightness = <0>; + max-brightness = <255>; + }; + + led@1 { + reg = <1>; + led-sources = <1>; + label = "backlight_cold"; + default-brightness = <0>; + max-brightness = <255>; + }; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + status = "okay"; + + /* TODO: CYTTSP5 touch controller at 0x24 */ + + /* TODO: TPS65185 PMIC for E Ink at 0x68 */ + +}; + +&i2c3 { + clock-frequency = <100000>; + status = "okay"; + + ricoh619: pmic@32 { + compatible = "ricoh,rc5t619"; + reg = <0x32>; + system-power-controller; + + regulators { + dcdc1_reg: DCDC1 { + regulator-name = "DCDC1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <900000>; + regulator-suspend-min-microvolt = <900000>; + }; + }; + + /* Core3_3V3 */ + dcdc2_reg: DCDC2 { + regulator-name = "DCDC2"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <3300000>; + regulator-suspend-min-microvolt = <3300000>; + }; + }; + + dcdc3_reg: DCDC3 { + regulator-name = "DCDC3"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <1140000>; + regulator-suspend-min-microvolt = <1140000>; + }; + }; + + /* Core4_1V2 */ + dcdc4_reg: DCDC4 { + regulator-name = "DCDC4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <1140000>; + regulator-suspend-min-microvolt = <1140000>; + }; + }; + + /* Core4_1V8 */ + dcdc5_reg: DCDC5 { + regulator-name = "DCDC5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <1700000>; + regulator-suspend-min-microvolt = <1700000>; + }; + }; + + /* IR_3V3 */ + ldo1_reg: LDO1 { + regulator-name = "LDO1"; + regulator-boot-on; + }; + + /* Core1_3V3 */ + ldo2_reg: LDO2 { + regulator-name = "LDO2"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <3000000>; + regulator-suspend-min-microvolt = <3000000>; + }; + }; + + /* Core5_1V2 */ + ldo3_reg: LDO3 { + regulator-name = "LDO3"; + regulator-always-on; + regulator-boot-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "LDO4"; + regulator-boot-on; + }; + + /* SPD_3V3 */ + ldo5_reg: LDO5 { + regulator-name = "LDO5"; + regulator-always-on; + regulator-boot-on; + }; + + /* DDR_0V6 */ + ldo6_reg: LDO6 { + regulator-name = "LDO6"; + regulator-always-on; + regulator-boot-on; + }; + + /* VDD_PWM */ + ldo7_reg: LDO7 { + regulator-name = "LDO7"; + regulator-always-on; + regulator-boot-on; + }; + + /* ldo_1v8 */ + ldo8_reg: LDO8 { + regulator-name = "LDO8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "LDO9"; + regulator-boot-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "LDO10"; + regulator-boot-on; + }; + + ldortc1_reg: LDORTC1 { + regulator-name = "LDORTC1"; + regulator-boot-on; + }; + + ldortc2_reg: LDORTC2 { + regulator-name = "LDORTC2"; + regulator-boot-on; + }; + }; + }; +}; + +&snvs_rtc { + /* we are using the rtc in the pmic, not disabled in imx6sll.dtsi */ + status = "disabled"; +}; + +&uart1 { + status = "okay"; +}; + +&usdhc2 { + non-removable; + status = "okay"; +}; + +&usdhc3 { + vmmc-supply = <®_wifi>; + mmc-pwrseq = <&wifi_pwrseq>; + cap-power-off-card; + non-removable; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + disable-over-current; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index 67d86012a85c..96678ddbb4e6 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -212,6 +212,7 @@ interrupt-controller; #interrupt-cells = <2>; }; + gpio1: gpio@e0050080 { compatible = "renesas,em-gio"; reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>; @@ -224,6 +225,7 @@ interrupt-controller; #interrupt-cells = <2>; }; + gpio2: gpio@e0050100 { compatible = "renesas,em-gio"; reg = <0xe0050100 0x2c>, <0xe0050140 0x20>; @@ -236,6 +238,7 @@ interrupt-controller; #interrupt-cells = <2>; }; + gpio3: gpio@e0050180 { compatible = "renesas,em-gio"; reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>; @@ -248,6 +251,7 @@ interrupt-controller; #interrupt-cells = <2>; }; + gpio4: gpio@e0050200 { compatible = "renesas,em-gio"; reg = <0xe0050200 0x2c>, <0xe0050240 0x20>; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 784818490376..b016b0b68306 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -138,7 +138,7 @@ #size-cells = <1>; ranges; - sysram@2020000 { + sram@2020000 { compatible = "mmio-sram"; reg = <0x02020000 0x40000>; #address-cells = <1>; @@ -265,7 +265,7 @@ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; - mct@10050000 { + timer@10050000 { compatible = "samsung,exynos4210-mct"; reg = <0x10050000 0x800>; interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, @@ -314,8 +314,7 @@ sysmmu_jpeg: sysmmu@11a60000 { compatible = "samsung,exynos-sysmmu"; reg = <0x11a60000 0x1000>; - interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; clock-names = "sysmmu", "master"; clocks = <&cmu CLK_SMMUJPEG>, <&cmu CLK_JPEG>; power-domains = <&pd_cam>; @@ -355,8 +354,7 @@ sysmmu_fimd0: sysmmu@11e20000 { compatible = "samsung,exynos-sysmmu"; reg = <0x11e20000 0x1000>; - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clock-names = "sysmmu", "master"; clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>; power-domains = <&pd_lcd0>; @@ -507,8 +505,7 @@ sysmmu_mfc: sysmmu@13620000 { compatible = "samsung,exynos-sysmmu"; reg = <0x13620000 0x1000>; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; clock-names = "sysmmu", "master"; clocks = <&cmu CLK_SMMUMFC_L>, <&cmu CLK_MFC>; power-domains = <&pd_mfc>; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 433f109d97ca..d2779a790ce3 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -111,28 +111,28 @@ syscon = <&pmu_system_controller>; }; - pd_mfc: mfc-power-domain@10023c40 { + pd_mfc: power-domain@10023c40 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C40 0x20>; #power-domain-cells = <0>; label = "MFC"; }; - pd_g3d: g3d-power-domain@10023c60 { + pd_g3d: power-domain@10023c60 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C60 0x20>; #power-domain-cells = <0>; label = "G3D"; }; - pd_lcd0: lcd0-power-domain@10023c80 { + pd_lcd0: power-domain@10023c80 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C80 0x20>; #power-domain-cells = <0>; label = "LCD0"; }; - pd_tv: tv-power-domain@10023c20 { + pd_tv: power-domain@10023c20 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C20 0x20>; #power-domain-cells = <0>; @@ -140,21 +140,21 @@ label = "TV"; }; - pd_cam: cam-power-domain@10023c00 { + pd_cam: power-domain@10023c00 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C00 0x20>; #power-domain-cells = <0>; label = "CAM"; }; - pd_gps: gps-power-domain@10023ce0 { + pd_gps: power-domain@10023ce0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CE0 0x20>; #power-domain-cells = <0>; label = "GPS"; }; - pd_gps_alive: gps-alive-power-domain@10023d00 { + pd_gps_alive: power-domain@10023d00 { compatible = "samsung,exynos4210-pd"; reg = <0x10023D00 0x20>; #power-domain-cells = <0>; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index f220716239db..554819ae1446 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -72,7 +72,7 @@ }; soc: soc { - sysram: sysram@2020000 { + sysram: sram@2020000 { compatible = "mmio-sram"; reg = <0x02020000 0x20000>; #address-cells = <1>; @@ -90,7 +90,7 @@ }; }; - pd_lcd1: lcd1-power-domain@10023ca0 { + pd_lcd1: power-domain@10023ca0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CA0 0x20>; #power-domain-cells = <0>; @@ -106,26 +106,17 @@ arm,data-latency = <2 2 1>; }; - mct: mct@10050000 { + mct: timer@10050000 { compatible = "samsung,exynos4210-mct"; reg = <0x10050000 0x800>; - interrupt-parent = <&mct_map>; - interrupts = <0>, <1>, <2>, <3>, <4>, <5>; clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; clock-names = "fin_pll", "mct"; - - mct_map: mct-map { - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = - <0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>, - <1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>, - <2 &combiner 12 6>, - <3 &combiner 12 7>, - <4 &gic 0 42 IRQ_TYPE_LEVEL_HIGH>, - <5 &gic 0 48 IRQ_TYPE_LEVEL_HIGH>; - }; + interrupts-extended = <&gic GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <&combiner 12 6>, + <&combiner 12 7>, + <&gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; }; watchdog: watchdog@10060000 { diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index d20db2dfe8e2..5022aa574b26 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -188,7 +188,7 @@ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; }; - sysram@2020000 { + sram@2020000 { compatible = "mmio-sram"; reg = <0x02020000 0x40000>; #address-cells = <1>; @@ -206,7 +206,7 @@ }; }; - pd_isp: isp-power-domain@10023ca0 { + pd_isp: power-domain@10023ca0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CA0 0x20>; #power-domain-cells = <0>; @@ -243,25 +243,16 @@ clock-names = "aclk200", "aclk400_mcuisp"; }; - mct@10050000 { + timer@10050000 { compatible = "samsung,exynos4412-mct"; reg = <0x10050000 0x800>; - interrupt-parent = <&mct_map>; - interrupts = <0>, <1>, <2>, <3>, <4>; clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; clock-names = "fin_pll", "mct"; - - mct_map: mct-map { - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = - <0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>, - <1 &combiner 12 5>, - <2 &combiner 12 6>, - <3 &combiner 12 7>, - <4 &gic 1 12 IRQ_TYPE_LEVEL_HIGH>; - }; + interrupts-extended = <&gic GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <&combiner 12 5>, + <&combiner 12 6>, + <&combiner 12 7>, + <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH>; }; watchdog: watchdog@10060000 { diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index 67f9b4504a42..4801ca759feb 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -35,8 +35,8 @@ #size-cells = <1>; ranges; - chipid@10000000 { - compatible = "samsung,exynos4210-chipid"; + chipid: chipid@10000000 { + compatible = "samsung,exynos4210-chipid", "syscon"; reg = <0x10000000 0x100>; }; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 6fcb78a354fe..d6c85efdb465 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -11,6 +11,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> #include <dt-bindings/clock/samsung,s2mps11.h> +#include <dt-bindings/sound/samsung-i2s.h> #include "exynos5250.dtsi" / { @@ -135,6 +136,12 @@ }; }; + sound { + compatible = "samsung,arndale-wm1811"; + samsung,audio-cpu = <&i2s0>; + samsung,audio-codec = <&wm1811>; + }; + fixed-rate-clocks { xxti { compatible = "samsung,clock-xxti"; @@ -151,6 +158,16 @@ }; }; +&clock { + assigned-clocks = <&clock CLK_FOUT_EPLL>; + assigned-clock-rates = <49152000>; +}; + +&clock_audss { + assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>; + assigned-clock-parents = <&clock CLK_FOUT_EPLL>; +}; + &cpu0 { cpu0-supply = <&buck2_reg>; }; @@ -502,9 +519,11 @@ &i2c_3 { status = "okay"; - wm1811a@1a { + wm1811: codec@1a { compatible = "wlf,wm1811"; reg = <0x1a>; + clocks = <&i2s0 CLK_I2S_CDCLK>; + clock-names = "MCLK1"; AVDD2-supply = <&main_dc_reg>; CPVDD-supply = <&main_dc_reg>; @@ -540,9 +559,15 @@ }; &i2s0 { + assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>; + assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>; status = "okay"; }; +&i2s0_bus { + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>; +}; + &mali { mali-supply = <&buck4_reg>; status = "okay"; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index fc966c10cf49..e1f0215e3985 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -164,7 +164,7 @@ }; soc: soc { - sysram@2020000 { + sram@2020000 { compatible = "mmio-sram"; reg = <0x02020000 0x30000>; #address-cells = <1>; @@ -233,28 +233,17 @@ power-domains = <&pd_mau>; }; - mct@101c0000 { + timer@101c0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&mct_map>; - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, - <4 0>, <5 0>; clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; clock-names = "fin_pll", "mct"; - - mct_map: mct-map { - #interrupt-cells = <2>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = <0x0 0 &combiner 23 3>, - <0x1 0 &combiner 23 4>, - <0x2 0 &combiner 25 2>, - <0x3 0 &combiner 25 3>, - <0x4 0 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>, - <0x5 0 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>; - }; + interrupts-extended = <&combiner 23 3>, + <&combiner 23 4>, + <&combiner 25 2>, + <&combiner 25 3>, + <&gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_0: pinctrl@11400000 { @@ -586,9 +575,9 @@ compatible = "samsung,s5pv210-i2s"; status = "disabled"; reg = <0x03830000 0x100>; - dmas = <&pdma0 10 - &pdma0 9 - &pdma0 8>; + dmas = <&pdma0 10>, + <&pdma0 9>, + <&pdma0 8>; dma-names = "tx", "rx", "tx-sec"; clocks = <&clock_audss EXYNOS_I2S_BUS>, <&clock_audss EXYNOS_I2S_BUS>, @@ -606,8 +595,8 @@ compatible = "samsung,s3c6410-i2s"; status = "disabled"; reg = <0x12D60000 0x100>; - dmas = <&pdma1 12 - &pdma1 11>; + dmas = <&pdma1 12>, + <&pdma1 11>; dma-names = "tx", "rx"; clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>; clock-names = "iis", "i2s_opclk0"; @@ -621,8 +610,8 @@ compatible = "samsung,s3c6410-i2s"; status = "disabled"; reg = <0x12D70000 0x100>; - dmas = <&pdma0 12 - &pdma0 11>; + dmas = <&pdma0 12>, + <&pdma0 11>; dma-names = "tx", "rx"; clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>; clock-names = "iis", "i2s_opclk0"; diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi index 3581b57fbbf7..b0811dbbb362 100644 --- a/arch/arm/boot/dts/exynos5260.dtsi +++ b/arch/arm/boot/dts/exynos5260.dtsi @@ -180,7 +180,7 @@ reg = <0x10000000 0x100>; }; - mct: mct@100b0000 { + mct: timer@100b0000 { compatible = "samsung,exynos4210-mct"; reg = <0x100B0000 0x1000>; clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>; diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index e6f78b1cee7c..a4b03d4c3de5 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -222,9 +222,9 @@ audi2s0: i2s@3830000 { compatible = "samsung,exynos5420-i2s"; reg = <0x03830000 0x100>; - dmas = <&pdma0 10 - &pdma0 9 - &pdma0 8>; + dmas = <&pdma0 10>, + <&pdma0 9>, + <&pdma0 8>; dma-names = "tx", "rx", "tx-sec"; clocks = <&clock_audss EXYNOS_I2S_BUS>, <&clock_audss EXYNOS_I2S_BUS>, diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 9eb48cabcca4..2bcbdf8a39bf 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -1065,6 +1065,10 @@ status = "okay"; }; +&timer { + arm,cpu-registers-not-fw-configured; +}; + &tmu_cpu0 { vtmu-supply = <&ldo10_reg>; }; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 7d51e0f4ab79..d39907a41f78 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -175,7 +175,7 @@ }; clock: clock-controller@10010000 { - compatible = "samsung,exynos5420-clock"; + compatible = "samsung,exynos5420-clock", "syscon"; reg = <0x10010000 0x30000>; #clock-cells = <1>; }; @@ -237,6 +237,32 @@ status = "disabled"; }; + dmc: memory-controller@10c20000 { + compatible = "samsung,exynos5422-dmc"; + reg = <0x10c20000 0x10000>, <0x10c30000 0x10000>; + interrupt-parent = <&combiner>; + interrupts = <16 0>, <16 1>; + interrupt-names = "drex_0", "drex_1"; + clocks = <&clock CLK_FOUT_SPLL>, + <&clock CLK_MOUT_SCLK_SPLL>, + <&clock CLK_FF_DOUT_SPLL2>, + <&clock CLK_FOUT_BPLL>, + <&clock CLK_MOUT_BPLL>, + <&clock CLK_SCLK_BPLL>, + <&clock CLK_MOUT_MX_MSPLL_CCORE>, + <&clock CLK_MOUT_MCLK_CDREX>; + clock-names = "fout_spll", + "mout_sclk_spll", + "ff_dout_spll2", + "fout_bpll", + "mout_bpll", + "sclk_bpll", + "mout_mx_mspll_ccore", + "mout_mclk_cdrex"; + samsung,syscon-clk = <&clock>; + status = "disabled"; + }; + nocp_mem0_0: nocp@10ca1000 { compatible = "samsung,exynos5420-nocp"; reg = <0x10CA1000 0x200>; @@ -273,6 +299,54 @@ status = "disabled"; }; + ppmu_dmc0_0: ppmu@10d00000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x10d00000 0x2000>; + clocks = <&clock CLK_PCLK_PPMU_DREX0_0>; + clock-names = "ppmu"; + events { + ppmu_event3_dmc0_0: ppmu-event3-dmc0_0 { + event-name = "ppmu-event3-dmc0_0"; + }; + }; + }; + + ppmu_dmc0_1: ppmu@10d10000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x10d10000 0x2000>; + clocks = <&clock CLK_PCLK_PPMU_DREX0_1>; + clock-names = "ppmu"; + events { + ppmu_event3_dmc0_1: ppmu-event3-dmc0_1 { + event-name = "ppmu-event3-dmc0_1"; + }; + }; + }; + + ppmu_dmc1_0: ppmu@10d60000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x10d60000 0x2000>; + clocks = <&clock CLK_PCLK_PPMU_DREX1_0>; + clock-names = "ppmu"; + events { + ppmu_event3_dmc1_0: ppmu-event3-dmc1_0 { + event-name = "ppmu-event3-dmc1_0"; + }; + }; + }; + + ppmu_dmc1_1: ppmu@10d70000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x10d70000 0x2000>; + clocks = <&clock CLK_PCLK_PPMU_DREX1_1>; + clock-names = "ppmu"; + events { + ppmu_event3_dmc1_1: ppmu-event3-dmc1_1 { + event-name = "ppmu-event3-dmc1_1"; + }; + }; + }; + gsc_pd: power-domain@10044000 { compatible = "samsung,exynos4210-pd"; reg = <0x10044000 0x20>; @@ -434,9 +508,9 @@ i2s0: i2s@3830000 { compatible = "samsung,exynos5420-i2s"; reg = <0x03830000 0x100>; - dmas = <&adma 0 - &adma 2 - &adma 1>; + dmas = <&adma 0>, + <&adma 2>, + <&adma 1>; dma-names = "tx", "rx", "tx-sec"; clocks = <&clock_audss EXYNOS_I2S_BUS>, <&clock_audss EXYNOS_I2S_BUS>, @@ -455,8 +529,8 @@ i2s1: i2s@12d60000 { compatible = "samsung,exynos5420-i2s"; reg = <0x12D60000 0x100>; - dmas = <&pdma1 12 - &pdma1 11>; + dmas = <&pdma1 12>, + <&pdma1 11>; dma-names = "tx", "rx"; clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>; clock-names = "iis", "i2s_opclk0"; @@ -471,8 +545,8 @@ i2s2: i2s@12d70000 { compatible = "samsung,exynos5420-i2s"; reg = <0x12D70000 0x100>; - dmas = <&pdma0 12 - &pdma0 11>; + dmas = <&pdma0 12>, + <&pdma0 11>; dma-names = "tx", "rx"; clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>; clock-names = "iis", "i2s_opclk0"; diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi index 829147e320e0..059fa32d1a8f 100644 --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -34,6 +34,98 @@ clock-frequency = <24000000>; }; }; + + dmc_opp_table: opp_table2 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <165000000>; + opp-microvolt = <875000>; + }; + opp01 { + opp-hz = /bits/ 64 <206000000>; + opp-microvolt = <875000>; + }; + opp02 { + opp-hz = /bits/ 64 <275000000>; + opp-microvolt = <875000>; + }; + opp03 { + opp-hz = /bits/ 64 <413000000>; + opp-microvolt = <887500>; + }; + opp04 { + opp-hz = /bits/ 64 <543000000>; + opp-microvolt = <937500>; + }; + opp05 { + opp-hz = /bits/ 64 <633000000>; + opp-microvolt = <1012500>; + }; + opp06 { + opp-hz = /bits/ 64 <728000000>; + opp-microvolt = <1037500>; + }; + opp07 { + opp-hz = /bits/ 64 <825000000>; + opp-microvolt = <1050000>; + }; + }; + + samsung_K3QF2F20DB: lpddr3 { + compatible = "samsung,K3QF2F20DB", "jedec,lpddr3"; + density = <16384>; + io-width = <32>; + #address-cells = <1>; + #size-cells = <0>; + + tRFC-min-tck = <17>; + tRRD-min-tck = <2>; + tRPab-min-tck = <2>; + tRPpb-min-tck = <2>; + tRCD-min-tck = <3>; + tRC-min-tck = <6>; + tRAS-min-tck = <5>; + tWTR-min-tck = <2>; + tWR-min-tck = <7>; + tRTP-min-tck = <2>; + tW2W-C2C-min-tck = <0>; + tR2R-C2C-min-tck = <0>; + tWL-min-tck = <8>; + tDQSCK-min-tck = <5>; + tRL-min-tck = <14>; + tFAW-min-tck = <5>; + tXSR-min-tck = <12>; + tXP-min-tck = <2>; + tCKE-min-tck = <2>; + tCKESR-min-tck = <2>; + tMRD-min-tck = <5>; + + timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 { + compatible = "jedec,lpddr3-timings"; + /* workaround: 'reg' shows max-freq */ + reg = <800000000>; + min-freq = <100000000>; + tRFC = <65000>; + tRRD = <6000>; + tRPab = <12000>; + tRPpb = <12000>; + tRCD = <10000>; + tRC = <33750>; + tRAS = <23000>; + tWTR = <3750>; + tWR = <7500>; + tRTP = <3750>; + tW2W-C2C = <0>; + tR2R-C2C = <0>; + tFAW = <25000>; + tXSR = <70000>; + tXP = <3750>; + tCKE = <3750>; + tCKESR = <3750>; + tMRD = <7000>; + }; + }; }; &adc { @@ -132,6 +224,15 @@ cpu-supply = <&buck2_reg>; }; +&dmc { + devfreq-events = <&ppmu_event3_dmc0_0>, <&ppmu_event3_dmc0_1>, + <&ppmu_event3_dmc1_0>, <&ppmu_event3_dmc1_1>; + device-handle = <&samsung_K3QF2F20DB>; + operating-points-v2 = <&dmc_opp_table>; + vdd-supply = <&buck1_reg>; + status = "okay"; +}; + &hsi2c_4 { status = "okay"; @@ -634,6 +735,22 @@ }; }; +&ppmu_dmc0_0 { + status = "okay"; +}; + +&ppmu_dmc0_1 { + status = "okay"; +}; + +&ppmu_dmc1_0 { + status = "okay"; +}; + +&ppmu_dmc1_1 { + status = "okay"; +}; + &tmu_cpu0 { vtmu-supply = <&ldo7_reg>; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts index c19b5a51ca44..a31ca2ef750f 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts @@ -26,6 +26,10 @@ status = "disabled"; }; +&chipid { + samsung,asv-bin = <2>; +}; + &pwm { /* * PWM 0 -- fan diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi index 9c3b63b7cac6..f78dee801cd9 100644 --- a/arch/arm/boot/dts/exynos54xx.dtsi +++ b/arch/arm/boot/dts/exynos54xx.dtsi @@ -45,8 +45,17 @@ status = "disabled"; }; + timer: timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <24000000>; + }; + soc: soc { - sysram@2020000 { + sram@2020000 { compatible = "mmio-sram"; reg = <0x02020000 0x54000>; #address-cells = <1>; @@ -64,30 +73,21 @@ }; }; - mct: mct@101c0000 { + mct: timer@101c0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101c0000 0xb00>; - interrupt-parent = <&mct_map>; - interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, - <8>, <9>, <10>, <11>; - - mct_map: mct-map { - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = <0 &combiner 23 3>, - <1 &combiner 23 4>, - <2 &combiner 25 2>, - <3 &combiner 25 3>, - <4 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>, - <5 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>, - <6 &gic 0 122 IRQ_TYPE_LEVEL_HIGH>, - <7 &gic 0 123 IRQ_TYPE_LEVEL_HIGH>, - <8 &gic 0 128 IRQ_TYPE_LEVEL_HIGH>, - <9 &gic 0 129 IRQ_TYPE_LEVEL_HIGH>, - <10 &gic 0 130 IRQ_TYPE_LEVEL_HIGH>, - <11 &gic 0 131 IRQ_TYPE_LEVEL_HIGH>; - }; + interrupts-extended = <&combiner 23 3>, + <&combiner 23 4>, + <&combiner 25 2>, + <&combiner 25 3>, + <&gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; }; watchdog: watchdog@101d0000 { diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 4398f2d1fe88..60ca3d685247 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -1034,6 +1034,10 @@ status = "okay"; }; +&timer { + arm,cpu-registers-not-fw-configured; +}; + &tmu_cpu0 { vtmu-supply = <&ldo10_reg>; }; diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/exynos5800.dtsi index de639eecc5c9..16177d815ee4 100644 --- a/arch/arm/boot/dts/exynos5800.dtsi +++ b/arch/arm/boot/dts/exynos5800.dtsi @@ -17,7 +17,7 @@ }; &clock { - compatible = "samsung,exynos5800-clock"; + compatible = "samsung,exynos5800-clock", "syscon"; }; &cluster_a15_opp_table { diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 3652f5556b29..f3464cf52e49 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -585,7 +585,7 @@ status = "disabled"; }; - iram: iram@ffff4c00 { + iram: sram@ffff4c00 { compatible = "mmio-sram"; reg = <0xffff4c00 0xb400>; }; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index d7f6fb764997..6b62f0745b82 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -55,7 +55,7 @@ interrupt-parent = <&avic>; ranges; - iram: iram@1fffc000 { + iram: sram@1fffc000 { compatible = "mmio-sram"; reg = <0x1fffc000 0x4000>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 0a4b9a5d9a9c..dea86b98e9c3 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -116,7 +116,7 @@ interrupt-parent = <&tzic>; ranges; - iram: iram@1ffe0000 { + iram: sram@1ffe0000 { compatible = "mmio-sram"; reg = <0x1ffe0000 0x20000>; }; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index f00dda334976..9b4efcd82636 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -18,34 +18,28 @@ display0: disp0 { compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb565"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ipu_disp0>; + + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; - display-timings { - claawvga { - native-mode; - clock-frequency = <27000000>; - hactive = <800>; - vactive = <480>; - hback-porch = <40>; - hfront-porch = <60>; - vback-porch = <10>; - vfront-porch = <10>; - hsync-len = <20>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - port { + port@0 { + reg = <0>; + display0_in: endpoint { remote-endpoint = <&ipu_di0_disp0>; }; }; + + port@1 { + reg = <1>; + + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; }; gpio-keys { @@ -84,6 +78,16 @@ }; }; + panel { + compatible = "sii,43wvf1g"; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/imx53-usbarmory.dts b/arch/arm/boot/dts/imx53-usbarmory.dts index ee6263d1c2d3..f34993a490ee 100644 --- a/arch/arm/boot/dts/imx53-usbarmory.dts +++ b/arch/arm/boot/dts/imx53-usbarmory.dts @@ -120,7 +120,7 @@ }; /* - * UART mode pin header configration + * UART mode pin header configuration * 3 - GPIO5[26], pull-down 100K * 4 - GPIO5[27], pull-down 100K * 5 - TX, pull-up 100K diff --git a/arch/arm/boot/dts/imx6dl-apf6dev.dts b/arch/arm/boot/dts/imx6dl-apf6dev.dts index 6632e99fbb68..3dcce3454b08 100644 --- a/arch/arm/boot/dts/imx6dl-apf6dev.dts +++ b/arch/arm/boot/dts/imx6dl-apf6dev.dts @@ -1,49 +1,6 @@ -/* - * Copyright 2015 Armadeus Systems - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2015 Armadeus Systems <support@armadeus.com> /dts-v1/; #include "imx6dl.dtsi" diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts index 9a5d6c94cca4..cd075621de52 100644 --- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts @@ -168,6 +168,21 @@ &i2c3 { status = "okay"; + /* + * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>, + * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms + */ + touchscreen@4a { + compatible = "atmel,maxtouch"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcap_1>; + reg = <0x4a>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 */ + reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; /* SODIMM 30 */ + status = "disabled"; + }; + /* M41T0M6 real time clock on carrier board */ rtc_i2c: rtc@68 { compatible = "st,m41t0"; @@ -175,6 +190,30 @@ }; }; +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_weim_gpio_1 &pinctrl_weim_gpio_2 + &pinctrl_weim_gpio_3 &pinctrl_weim_gpio_4 + &pinctrl_weim_gpio_5 &pinctrl_weim_gpio_6 + &pinctrl_usbh_oc_1 &pinctrl_usbc_id_1 + >; + + pinctrl_pcap_1: pcap1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 /* SODIMM 28 */ + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* SODIMM 30 */ + >; + }; + + pinctrl_mxt_ts: mxttsgrp { + fsl,pins = < + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x130b0 /* SODIMM 107 */ + MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x130b0 /* SODIMM 106 */ + >; + }; +}; + &ipu1_di0_disp0 { remote-endpoint = <&lcd_display_in>; }; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi index e8d800fec637..80ed5f16a76e 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/pwm/pwm.h> / { @@ -308,7 +309,7 @@ clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; - status = "disabled"; + status = "okay"; oled: oled@3d { compatible = "solomon,ssd1305fb-i2c"; @@ -330,6 +331,18 @@ vcc-supply = <&sw2_reg>; status = "disabled"; }; + + touchkeys: keys@5a { + compatible = "fsl,mpr121-touchkey"; + reg = <0x5a>; + vdd-supply = <&sw2_reg>; + autorepeat; + linux,keycodes = <KEY_1>, <KEY_2>, <KEY_3>, <KEY_4>, <KEY_5>, + <KEY_6>, <KEY_7>, <KEY_8>, <KEY_9>, + <KEY_BACKSPACE>, <KEY_0>, <KEY_ENTER>; + poll-interval = <50>; + status = "disabled"; + }; }; &iomuxc { @@ -447,6 +460,13 @@ >; }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b098 + MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b098 + >; + }; + pinctrl_usbh1: usbh1grp { fsl,pins = < MX6QDL_PAD_EIM_D30__USB_H1_OC 0x1b098 @@ -532,6 +552,12 @@ status = "okay"; }; +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + &usbh1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts b/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts index f97927064750..6010d3d872ab 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts +++ b/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts @@ -25,10 +25,6 @@ status = "okay"; }; -&i2c3 { - status = "okay"; -}; - &leds { status = "okay"; }; @@ -45,6 +41,10 @@ status = "okay"; }; +&touchkeys { + status = "okay"; +}; + &usdhc3 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 2ed10310a7b7..008312ee0c31 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -64,6 +64,7 @@ 396000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6QDL_CLK_ARM>, <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, <&clks IMX6QDL_CLK_STEP>, diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts index 0edd3043d9c1..4665e15b196d 100644 --- a/arch/arm/boot/dts/imx6q-apalis-eval.dts +++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts @@ -167,6 +167,19 @@ &i2c1 { status = "okay"; + /* + * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>, + * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms + */ + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&gpio6>; + interrupts = <10 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* SODIMM 13 */ + status = "disabled"; + }; + pcie-switch@58 { compatible = "plx,pex8605"; reg = <0x58>; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts index b94bb687be6b..a3fa04a97d81 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts @@ -172,6 +172,19 @@ &i2c1 { status = "okay"; + /* + * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>, + * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms + */ + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&gpio6>; + interrupts = <10 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* SODIMM 13 */ + status = "disabled"; + }; + /* M41T0M6 real time clock on carrier board */ rtc_i2c: rtc@68 { compatible = "st,m41t0"; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts index 302fd6adc8a7..5ba49d0f4880 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts @@ -171,6 +171,19 @@ &i2c1 { status = "okay"; + /* + * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>, + * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms + */ + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&gpio6>; + interrupts = <10 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* SODIMM 13 */ + status = "disabled"; + }; + eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; diff --git a/arch/arm/boot/dts/imx6q-apf6dev.dts b/arch/arm/boot/dts/imx6q-apf6dev.dts index 07a36bb8075b..664b0af8f0bb 100644 --- a/arch/arm/boot/dts/imx6q-apf6dev.dts +++ b/arch/arm/boot/dts/imx6q-apf6dev.dts @@ -1,49 +1,6 @@ -/* - * Copyright 2015 Armadeus Systems - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2015 Armadeus Systems <support@armadeus.com> /dts-v1/; #include "imx6q.dtsi" diff --git a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts index 9c61e3be2d9a..5219553df1e7 100644 --- a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts +++ b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts @@ -43,6 +43,14 @@ status = "okay"; }; +&can1 { + status = "okay"; +}; + +&can2 { + status = "disabled"; +}; + &hdmi { ddc-i2c-bus = <&i2c2>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi index 387801dde02e..845cfad99bf9 100644 --- a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi +++ b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi @@ -51,13 +51,11 @@ &can1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan1>; - status = "okay"; }; &can2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan2>; - status = "okay"; }; &ecspi1 { diff --git a/arch/arm/boot/dts/imx6q-gw54xx.dts b/arch/arm/boot/dts/imx6q-gw54xx.dts index ecc3989f607b..d5d46908cf6e 100644 --- a/arch/arm/boot/dts/imx6q-gw54xx.dts +++ b/arch/arm/boot/dts/imx6q-gw54xx.dts @@ -15,19 +15,16 @@ sound-digital { compatible = "simple-audio-card"; simple-audio-card,name = "tda1997x-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_codec>; + simple-audio-card,frame-master = <&sound_codec>; - simple-audio-card,dai-link@0 { - format = "i2s"; - - cpu { - sound-dai = <&ssi2>; - }; + sound_cpu: simple-audio-card,cpu { + sound-dai = <&ssi2>; + }; - codec { - bitclock-master; - frame-master; - sound-dai = <&hdmi_receiver>; - }; + sound_codec: simple-audio-card,codec { + sound-dai = <&hdmi_receiver>; }; }; }; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index d038f4117024..9d3be1cc6b64 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -73,6 +73,7 @@ 396000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6QDL_CLK_ARM>, <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, <&clks IMX6QDL_CLK_STEP>, @@ -107,6 +108,7 @@ 396000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6QDL_CLK_ARM>, <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, <&clks IMX6QDL_CLK_STEP>, @@ -141,6 +143,7 @@ 396000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6QDL_CLK_ARM>, <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, <&clks IMX6QDL_CLK_STEP>, diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 7c4ad541c3f5..ff1287e6b7ce 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -148,14 +148,16 @@ }; &can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan1>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_flexcan1_default>; + pinctrl-1 = <&pinctrl_flexcan1_sleep>; status = "disabled"; }; &can2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan2>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_flexcan2_default>; + pinctrl-1 = <&pinctrl_flexcan2_sleep>; status = "disabled"; }; @@ -205,8 +207,11 @@ /* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ &i2c1 { clock-frequency = <100000>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; @@ -216,8 +221,11 @@ */ &i2c2 { clock-frequency = <100000>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; pmic: pfuze100@8 { @@ -372,9 +380,9 @@ */ &i2c3 { clock-frequency = <100000>; - pinctrl-names = "default", "recovery"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c3>; - pinctrl-1 = <&pinctrl_i2c3_recovery>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; scl-gpios = <&gpio3 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio3 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; @@ -599,19 +607,32 @@ >; }; - pinctrl_flexcan1: flexcan1grp { + pinctrl_flexcan1_default: flexcan1defgrp { fsl,pins = < MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 >; }; - pinctrl_flexcan2: flexcan2grp { + pinctrl_flexcan1_sleep: flexcan1slpgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0 + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0 + >; + }; + + pinctrl_flexcan2_default: flexcan2defgrp { fsl,pins = < MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 >; }; + pinctrl_flexcan2_sleep: flexcan2slpgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x0 + >; + }; pinctrl_gpio_bl_on: gpioblon { fsl,pins = < @@ -646,6 +667,13 @@ >; }; + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x4001b8b1 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 @@ -653,6 +681,13 @@ >; }; + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1 + >; + }; + pinctrl_i2c3: i2c3grp { fsl,pins = < MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 @@ -660,7 +695,7 @@ >; }; - pinctrl_i2c3_recovery: i2c3recoverygrp { + pinctrl_i2c3_gpio: i2c3gpiogrp { fsl,pins = < MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x4001b8b1 MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x4001b8b1 diff --git a/arch/arm/boot/dts/imx6qdl-apf6.dtsi b/arch/arm/boot/dts/imx6qdl-apf6.dtsi index 4738c3c1ab50..b78ed7974ea9 100644 --- a/arch/arm/boot/dts/imx6qdl-apf6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apf6.dtsi @@ -1,66 +1,56 @@ -/* - * Copyright 2015 Armadeus Systems - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2015 Armadeus Systems <support@armadeus.com> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> +/ { + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <®_3p3v>; + }; + + usdhc1_pwrseq: usdhc1-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; + post-power-on-delay-ms = <15>; + power-off-delay-us = <70>; + }; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; phy-reset-duration = <10>; phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; + phy-handle = <ðphy1>; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + interrupt-parent = <&gpio1>; + interrupts = <28 IRQ_TYPE_LEVEL_LOW>; + status = "okay"; + }; + }; }; /* Bluetooth */ &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; status = "okay"; }; @@ -68,6 +58,12 @@ &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <4>; + mmc-pwrseq = <&usdhc1_pwrseq>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + cap-power-off-card; + keep-power-in-suspend; non-removable; status = "okay"; @@ -94,65 +90,63 @@ }; &iomuxc { - apf6 { - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x130b0 - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x130b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x13030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1f030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1f030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030 - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x130b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x130b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x13030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1f030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1f030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b0 - MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b0 - MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b0 - MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b0 - MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x130b0 /* BT_EN */ - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b0 + MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b0 + MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b0 + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b0 + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x130b0 /* BT_EN */ + >; + }; - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 - MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 - MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 - MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 - MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 - MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 - MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 /* WL_EN */ - MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* WL_IRQ */ - >; - }; + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x130b0 /* WL_EN */ + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x130b0 /* WL_IRQ */ + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 - MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 - MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 - MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi index 9fc1fa449f64..b8e74ab3c993 100644 --- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi @@ -1,49 +1,6 @@ -/* - * Copyright 2015 Armadeus Systems - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2015 Armadeus Systems <support@armadeus.com> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -54,35 +11,37 @@ stdout-path = &uart4; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 191000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <0>; + power-supply = <®_5v>; + }; + disp0 { compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "bgr666"; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu1_disp1>; - - display-timings { - lw700 { - clock-frequency = <33000033>; - hactive = <800>; - vactive = <480>; - hback-porch = <96>; - hfront-porch = <96>; - vback-porch = <20>; - vfront-porch = <21>; - hsync-len = <64>; - vsync-len = <4>; - hsync-active = <1>; - vsync-active = <1>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; + pinctrl-0 = <&pinctrl_ipu1_disp0>; + + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; - port { display_in: endpoint { remote-endpoint = <&ipu1_di0_disp0>; }; }; + + port@1 { + reg = <1>; + + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; }; gpio-keys { @@ -111,17 +70,30 @@ }; }; + panel { + compatible = "armadeus,st0700-adapt"; + power-supply = <®_3p3v>; + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "3P3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; + vin-supply = <®_5v>; }; - reg_usbh1_vbus: regulator-usb-h1-vbus { + reg_5v: regulator-5v { compatible = "regulator-fixed"; - regulator-name = "usb_h1_vbus"; + regulator-name = "5V"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; @@ -166,6 +138,7 @@ &can2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_5v>; status = "okay"; }; @@ -212,6 +185,11 @@ VDDA-supply = <®_3p3v>; VDDIO-supply = <®_3p3v>; }; + + rtc@6f { + compatible = "microchip,mcp7940x"; + reg = <0x6f>; + }; }; &i2c3 { @@ -261,7 +239,7 @@ }; &usbh1 { - vbus-supply = <®_usbh1_vbus>; + vbus-supply = <®_5v>; phy_type = "utmi"; status = "okay"; }; @@ -297,178 +275,176 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpios>; - apf6dev { - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0 - MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0 - MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0 - MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0 - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 - >; - }; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0 + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + >; + }; - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 - MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 - MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 - MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 - MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 - MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 - >; - }; + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + >; + }; - pinctrl_flexcan2: flexcan2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 - MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 - >; - }; + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 + >; + }; - pinctrl_gpio_keys: gpiokeysgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 - >; - }; + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + >; + }; - pinctrl_gpio_leds: gpioledsgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x130b0 - >; - }; + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x130b0 + >; + }; - pinctrl_gpios: gpiosgrp { - fsl,pins = < - MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x100b1 - MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1 - MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x100b1 - MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x100b1 - MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x100b1 - MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x100b1 - MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x100b1 - MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x100b1 - MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x100b1 - >; - }; + pinctrl_gpios: gpiosgrp { + fsl,pins = < + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x100b1 + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1 + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x100b1 + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x100b1 + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x100b1 + MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x100b1 + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x100b1 + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x100b1 + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x100b1 + >; + }; - pinctrl_gsm: gsmgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0 /* GSM_POKIN */ - MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x130b0 /* GSM_PWR_EN */ - >; - }; + pinctrl_gsm: gsmgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0 /* GSM_POKIN */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x130b0 /* GSM_PWR_EN */ + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 - MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + >; + }; - pinctrl_ipu1_disp1: ipu1disp1grp { - fsl,pins = < - MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100b1 - MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x100b1 - MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x100b1 - MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x100b1 - MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x100b1 - MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x100b1 - MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x100b1 - MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x100b1 - MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x100b1 - MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x100b1 - MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100b1 - MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x100b1 - MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x100b1 - MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x100b1 - MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x100b1 - MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x100b1 - MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x100b1 - MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x100b1 - MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x100b1 - MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x100b1 - MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x100b1 - MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x100b1 - >; - }; + pinctrl_ipu1_disp0: ipu1disp0grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100b1 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x100b1 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x100b1 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x100b1 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x100b1 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x100b1 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x100b1 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x100b1 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x100b1 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x100b1 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100b1 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x100b1 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x100b1 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x100b1 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x100b1 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x100b1 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x100b1 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x100b1 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x100b1 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x100b1 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x100b1 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x100b1 + >; + }; - pinctrl_pcie: pciegrp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02 0x130b0 - >; - }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02 0x130b0 + >; + }; - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 - >; - }; + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b0 - MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b0 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b0 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b0 + >; + }; - pinctrl_uart3: uart3grp { - fsl,pins = < - MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b0 - MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b0 - MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b0 - MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b0 - >; - }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b0 + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b0 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b0 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b0 + >; + }; - pinctrl_uart4: uart4grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b0 - MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b0 - >; - }; + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b0 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1b0b0 - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1b0b0 + >; + }; - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 - >; - }; + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; - pinctrl_spdif: spdifgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0 - >; - }; + pinctrl_spdif: spdifgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0 + >; + }; - pinctrl_touchscreen: touchscreengrp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x1b0b0 - >; - }; + pinctrl_touchscreen: touchscreengrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x1b0b0 + >; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index 019dda6b88ad..d03dff23863d 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -166,8 +166,11 @@ */ &i2c2 { clock-frequency = <100000>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-0 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio3 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; pmic: pfuze100@8 { @@ -312,9 +315,9 @@ */ &i2c3 { clock-frequency = <100000>; - pinctrl-names = "default", "recovery"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c3>; - pinctrl-1 = <&pinctrl_i2c3_recovery>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; @@ -426,6 +429,9 @@ }; &iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh_oc_1>; + pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 @@ -509,6 +515,13 @@ >; }; + pinctrl_i2c2_gpio: i2c2grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x4001b8b1 + MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x4001b8b1 + >; + }; + pinctrl_i2c3: i2c3grp { fsl,pins = < MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 @@ -516,7 +529,7 @@ >; }; - pinctrl_i2c3_recovery: i2c3recoverygrp { + pinctrl_i2c3_gpio: i2c3gpiogrp { fsl,pins = < MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1 MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1 @@ -615,6 +628,13 @@ >; }; + pinctrl_usbh_oc_1: usbhoc1grp { + fsl,pins = < + /* USBH_OC */ + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b0 + >; + }; + pinctrl_spdif: spdifgrp { fsl,pins = < MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0 @@ -681,6 +701,13 @@ >; }; + pinctrl_usbc_id_1: usbc_id-1 { + fsl,pins = < + /* USBC_ID */ + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi index c23ba229fd05..c38e86eedcc0 100644 --- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi @@ -105,19 +105,16 @@ sound-digital { compatible = "simple-audio-card"; simple-audio-card,name = "tda1997x-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_codec>; + simple-audio-card,frame-master = <&sound_codec>; - simple-audio-card,dai-link@0 { - format = "i2s"; - - cpu { - sound-dai = <&ssi2>; - }; + sound_cpu: simple-audio-card,cpu { + sound-dai = <&ssi2>; + }; - codec { - bitclock-master; - frame-master; - sound-dai = <&hdmi_receiver>; - }; + sound_codec: simple-audio-card,codec { + sound-dai = <&hdmi_receiver>; }; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi index 97f1659144ea..de514eb5aa99 100644 --- a/arch/arm/boot/dts/imx6qdl-rex.dtsi +++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi @@ -132,6 +132,19 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + pca9535: gpio-expander@27 { + compatible = "nxp,pca9535"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pca9535>; + interrupt-parent = <&gpio6>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + }; + eeprom@57 { compatible = "atmel,24c02"; reg = <0x57>; @@ -237,6 +250,12 @@ >; }; + pinctrl_pca9535: pca9535grp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x17059 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi index 776bfc77f89d..828dd20cd27d 100644 --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi @@ -210,6 +210,14 @@ >; }; + pinctrl_usbotg: usbotg { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x17059 + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x17059 + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 @@ -287,6 +295,12 @@ status = "okay"; }; +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + status = "okay"; +}; + &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index 2cfb4112a467..c070893c509e 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -279,8 +279,18 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; + phy-handle = <ðphy>; phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@1 { + reg = <1>; + }; + }; }; &mipi_csi { diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 93be00a60c88..a2a4f33a3e3e 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -358,8 +358,10 @@ compatible = "fsl,mma8451"; reg = <0x1c>; interrupt-parent = <&gpio1>; - interrupt-names = "int1", "int2"; - interrupts = <18 IRQ_TYPE_LEVEL_LOW>, <20 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "INT2"; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <®_3p3v>; + vddio-supply = <®_3p3v>; }; hpa2: amp@60 { @@ -849,7 +851,6 @@ &iomuxc { pinctrl_accel: accelgrp { fsl,pins = < - MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x4001b000 MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x4001b000 >; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 3a96b5538a2a..59c54e6ad09a 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -525,7 +525,7 @@ anatop: anatop@20c8000 { compatible = "fsl,imx6sl-anatop", "fsl,imx6q-anatop", - "syscon", "simple-bus"; + "syscon", "simple-mfd"; reg = <0x020c8000 0x1000>; interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>, <0 54 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts b/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts new file mode 100644 index 000000000000..7214d1c98249 --- /dev/null +++ b/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts @@ -0,0 +1,324 @@ +// SPDX-License-Identifier: (GPL-2.0) +/* + * Device tree for the Kobo Clara HD ebook reader + * + * Name on mainboard is: 37NB-E60K00+4A4 + * Serials start with: E60K02 (a number also seen in + * vendor kernel sources) + * + * This mainboard seems to be equipped with different SoCs. + * In the Kobo Clara HD ebook reader it is an i.MX6SLL + * + * Copyright 2019 Andreas Kemnade + * based on works + * Copyright 2016 Freescale Semiconductor, Inc. + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include "imx6sll.dtsi" +#include "e60k02.dtsi" + +/ { + model = "Kobo Clara HD"; + compatible = "kobo,clarahd", "fsl,imx6sll"; +}; + +&clks { + assigned-clocks = <&clks IMX6SLL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <393216000>; +}; + +&cpu0 { + arm-supply = <&dcdc3_reg>; + soc-supply = <&dcdc1_reg>; +}; + +&gpio_keys { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; +}; + +&i2c1 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_sleep>; +}; + +&i2c2 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_sleep>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_gpio_keys: gpio-keysgrp { + fsl,pins = < + MX6SLL_PAD_SD1_DATA1__GPIO5_IO08 0x17059 /* PWR_SW */ + MX6SLL_PAD_SD1_DATA4__GPIO5_IO12 0x17059 /* HALL_EN */ + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX6SLL_PAD_LCD_DATA00__GPIO2_IO20 0x79 + MX6SLL_PAD_LCD_DATA01__GPIO2_IO21 0x79 + MX6SLL_PAD_LCD_DATA02__GPIO2_IO22 0x79 + MX6SLL_PAD_LCD_DATA03__GPIO2_IO23 0x79 + MX6SLL_PAD_LCD_DATA04__GPIO2_IO24 0x79 + MX6SLL_PAD_LCD_DATA05__GPIO2_IO25 0x79 + MX6SLL_PAD_LCD_DATA06__GPIO2_IO26 0x79 + MX6SLL_PAD_LCD_DATA07__GPIO2_IO27 0x79 + MX6SLL_PAD_LCD_DATA08__GPIO2_IO28 0x79 + MX6SLL_PAD_LCD_DATA09__GPIO2_IO29 0x79 + MX6SLL_PAD_LCD_DATA10__GPIO2_IO30 0x79 + MX6SLL_PAD_LCD_DATA11__GPIO2_IO31 0x79 + MX6SLL_PAD_LCD_DATA12__GPIO3_IO00 0x79 + MX6SLL_PAD_LCD_DATA13__GPIO3_IO01 0x79 + MX6SLL_PAD_LCD_DATA14__GPIO3_IO02 0x79 + MX6SLL_PAD_LCD_DATA15__GPIO3_IO03 0x79 + MX6SLL_PAD_LCD_DATA16__GPIO3_IO04 0x79 + MX6SLL_PAD_LCD_DATA17__GPIO3_IO05 0x79 + MX6SLL_PAD_LCD_DATA18__GPIO3_IO06 0x79 + MX6SLL_PAD_LCD_DATA19__GPIO3_IO07 0x79 + MX6SLL_PAD_LCD_DATA20__GPIO3_IO08 0x79 + MX6SLL_PAD_LCD_DATA21__GPIO3_IO09 0x79 + MX6SLL_PAD_LCD_DATA22__GPIO3_IO10 0x79 + MX6SLL_PAD_LCD_DATA23__GPIO3_IO11 0x79 + MX6SLL_PAD_LCD_CLK__GPIO2_IO15 0x79 + MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16 0x79 + MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17 0x79 + MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18 0x79 + MX6SLL_PAD_LCD_RESET__GPIO2_IO19 0x79 + MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x79 + MX6SLL_PAD_KEY_ROW7__GPIO4_IO07 0x79 + MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x79 + MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x79 + MX6SLL_PAD_KEY_ROW6__GPIO4_IO05 0x79 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x4001f8b1 + MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c1_sleep: i2c1grp-sleep { + fsl,pins = < + MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1 + MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6SLL_PAD_I2C2_SCL__I2C2_SCL 0x4001f8b1 + MX6SLL_PAD_I2C2_SDA__I2C2_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c2_sleep: i2c2grp-sleep { + fsl,pins = < + MX6SLL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1 + MX6SLL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6SLL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1 + MX6SLL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6SLL_PAD_SD1_DATA6__GPIO5_IO07 0x17059 + >; + }; + + pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp { + fsl,pins = < + MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10 0x10059 /* HWEN */ + >; + }; + + pinctrl_ricoh_gpio: ricoh-gpiogrp { + fsl,pins = < + MX6SLL_PAD_SD1_CLK__GPIO5_IO15 0x1b8b1 /* ricoh619 chg */ + MX6SLL_PAD_SD1_DATA0__GPIO5_IO11 0x1b8b1 /* ricoh619 irq */ + MX6SLL_PAD_KEY_COL2__GPIO3_IO28 0x1b8b1 /* ricoh619 bat_low_int */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1 + MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6SLL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6SLL_PAD_SD2_CLK__SD2_CLK 0x13059 + MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x17059 + MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x17059 + MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x17059 + MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp-100mhz { + fsl,pins = < + MX6SLL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6SLL_PAD_SD2_CLK__SD2_CLK 0x130b9 + MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x170b9 + MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x170b9 + MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x170b9 + MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp-200mhz { + fsl,pins = < + MX6SLL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6SLL_PAD_SD2_CLK__SD2_CLK 0x130f9 + MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x170f9 + MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x170f9 + MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x170f9 + MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc2_sleep: usdhc2grp-sleep { + fsl,pins = < + MX6SLL_PAD_SD2_CMD__GPIO5_IO04 0x100f9 + MX6SLL_PAD_SD2_CLK__GPIO5_IO05 0x100f9 + MX6SLL_PAD_SD2_DATA0__GPIO5_IO01 0x100f9 + MX6SLL_PAD_SD2_DATA1__GPIO4_IO30 0x100f9 + MX6SLL_PAD_SD2_DATA2__GPIO5_IO03 0x100f9 + MX6SLL_PAD_SD2_DATA3__GPIO4_IO28 0x100f9 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__SD3_CMD 0x11059 + MX6SLL_PAD_SD3_CLK__SD3_CLK 0x11059 + MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x11059 + MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x11059 + MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x11059 + MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x11059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6SLL_PAD_SD3_CLK__SD3_CLK 0x170b9 + MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170b9 + MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170b9 + MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170b9 + MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6SLL_PAD_SD3_CLK__SD3_CLK 0x170f9 + MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170f9 + MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170f9 + MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170f9 + MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc3_sleep: usdhc3grp-sleep { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__GPIO5_IO21 0x100c1 + MX6SLL_PAD_SD3_CLK__GPIO5_IO18 0x100c1 + MX6SLL_PAD_SD3_DATA0__GPIO5_IO19 0x100c1 + MX6SLL_PAD_SD3_DATA1__GPIO5_IO20 0x100c1 + MX6SLL_PAD_SD3_DATA2__GPIO5_IO16 0x100c1 + MX6SLL_PAD_SD3_DATA3__GPIO5_IO17 0x100c1 + >; + }; + + pinctrl_wifi_power: wifi-powergrp { + fsl,pins = < + MX6SLL_PAD_SD2_DATA6__GPIO4_IO29 0x10059 /* WIFI_3V3_ON */ + >; + }; + + pinctrl_wifi_reset: wifi-resetgrp { + fsl,pins = < + MX6SLL_PAD_SD2_DATA7__GPIO5_IO00 0x10059 /* WIFI_RST */ + >; + }; +}; + +&leds { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; +}; + +&lm3630a { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>; +}; + +®_wifi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_power>; +}; + +&ricoh619 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ricoh_gpio>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + pinctrl-3 = <&pinctrl_usdhc2_sleep>; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + pinctrl-3 = <&pinctrl_usdhc3_sleep>; +}; + +&wifi_pwrseq { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_reset>; +}; diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi index 13c7ba7fa6bc..85aa8bb98528 100644 --- a/arch/arm/boot/dts/imx6sll.dtsi +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -507,7 +507,7 @@ anatop: anatop@20c8000 { compatible = "fsl,imx6sll-anatop", "fsl,imx6q-anatop", - "syscon", "simple-bus"; + "syscon", "simple-mfd"; reg = <0x020c8000 0x4000>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 531a52c1e987..59bad60a47dc 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -594,7 +594,7 @@ anatop: anatop@20c8000 { compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop", - "syscon", "simple-bus"; + "syscon", "simple-mfd"; reg = <0x020c8000 0x1000>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi index c2a9dd57e56a..1506eb12b21e 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi @@ -30,6 +30,16 @@ enable-active-high; }; + reg_sensors: regulator-sensors { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sensors_reg>; + regulator-name = "sensors-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 2 GPIO_ACTIVE_LOW>; + }; + reg_can_3v3: regulator-can-3v3 { compatible = "regulator-fixed"; regulator-name = "can-3v3"; @@ -180,9 +190,11 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - mag3110@e { + magnetometer@e { compatible = "fsl,mag3110"; reg = <0x0e>; + vdd-supply = <®_sensors>; + vddio-supply = <®_sensors>; }; }; @@ -266,6 +278,8 @@ &usbotg1 { dr_mode = "otg"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; status = "okay"; }; @@ -448,6 +462,12 @@ >; }; + pinctrl_sensors_reg: sensorsreggrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 + >; + }; + pinctrl_pwm1: pwm1grp { fsl,pins = < MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x110b0 @@ -499,6 +519,12 @@ >; }; + pinctrl_usb_otg1: usbotg1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi b/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi new file mode 100644 index 000000000000..f2386dcb9ff2 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi @@ -0,0 +1,148 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2019 Armadeus Systems <support@armadeus.com> + +/ { + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0>; /* will be filled by U-Boot */ + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + usdhc3_pwrseq: usdhc3-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-reset-duration = <1>; + phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + phy-handle = <ðphy1>; + phy-supply = <®_3v3>; + status = "okay"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + interrupt-parent = <&gpio4>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + status = "okay"; + }; + }; +}; + +/* Bluetooth */ +&uart8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart8>; + uart-has-rtscts; + status = "okay"; +}; + +/* eMMC */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <8>; + no-1-8-v; + non-removable; + status = "okay"; +}; + +/* WiFi */ +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + no-1-8-v; + non-removable; + mmc-pwrseq = <&usdhc3_pwrseq>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio2>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "host-wake"; + }; +}; + +&iomuxc { + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x130b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x130b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x130b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x130b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + /* INT# */ + MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x1b0b0 + /* RST# */ + MX6UL_PAD_NAND_DATA00__GPIO4_IO02 0x130b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + >; + }; + + pinctrl_uart8: uart8grp { + fsl,pins = < + MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS 0x1b0b0 + /* BT_REG_ON */ + MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x130b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17059 + MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17059 + MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17059 + MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x1b0b0 + MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x100b0 + MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x1b0b0 + MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x1b0b0 + MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x1b0b0 + MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x1b0b0 + /* WL_REG_ON */ + MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x130b0 + /* WL_IRQ */ + MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi b/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi new file mode 100644 index 000000000000..18966350bfd8 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi @@ -0,0 +1,338 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2019 Armadeus Systems <support@armadeus.com> + +/ { + chosen { + stdout-path = &uart1; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 191000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_5v>; + status = "okay"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + user-button { + label = "User button"; + gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + linux,code = <BTN_MISC>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + + user-led { + label = "User"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + onewire { + compatible = "w1-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_w1>; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + }; + + panel: panel { + compatible = "armadeus,st0700-adapt"; + power-supply = <®_3v3>; + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&lcdif_out>; + }; + }; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbotg1_vbus: regulator-usbotg1vbus { + compatible = "regulator-fixed"; + regulator-name = "usbotg1vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_vbus>; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usbotg2_vbus: regulator-usbotg2vbus { + compatible = "regulator-fixed"; + regulator-name = "usbotg2vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg2_vbus>; + gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&adc1 { + vref-supply = <®_3v3>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_5v>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_5v>; + status = "okay"; +}; + +&ecspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4>; + cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>; + status = "okay"; + + spidev0: spi@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <5000000>; + }; + + spidev1: spi@1 { + compatible = "spidev"; + reg = <1>; + spi-max-frequency = <5000000>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <400000>; + status = "okay"; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif>; + status = "okay"; + + port { + lcdif_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&snvs_pwrkey { + status = "disabled"; +}; + +&tsc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc>; + xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; + measure-delay-time = <0xffff>; + pre-charge-time = <0xffff>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_id>; + vbus-supply = <®_usbotg1_vbus>; + dr_mode = "otg"; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usbotg2_vbus>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpios>; + + pinctrl_ecspi4: ecspi4grp { + fsl,pins = < + MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK 0x1b0b0 + MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI 0x1b0b0 + MX6UL_PAD_NAND_DATA06__ECSPI4_MISO 0x1b0b0 + MX6UL_PAD_NAND_DATA01__GPIO4_IO03 0x1b0b0 + MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x1b0b0 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0 + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0 + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0 + >; + }; + + pinctrl_gpios: gpiosgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x0b0b0 + MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x0b0b0 + MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x0b0b0 + MX6UL_PAD_NAND_RE_B__GPIO4_IO00 0x0b0b0 + MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x0b0b0 + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0b0b0 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0b0b0 + MX6UL_PAD_NAND_WE_B__GPIO4_IO01 0x0b0b0 + >; + }; + + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x0b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 + MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 + >; + }; + + pinctrl_lcdif: lcdifgrp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x100b1 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x100b1 + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x100b1 + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x100b1 + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x100b1 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x100b1 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x100b1 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x100b1 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x100b1 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x100b1 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x100b1 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x100b1 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x100b1 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x100b1 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x100b1 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x100b1 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x100b1 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x100b1 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x100b1 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x100b1 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x100b1 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x100b1 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0b0b0 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6UL_PAD_NAND_ALE__PWM3_OUT 0x1b0b0 + >; + }; + + pinctrl_tsc: tscgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 + MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usbotg1_id: usbotg1idgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x1b0b0 + >; + }; + + pinctrl_usbotg1_vbus: usbotg1vbusgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts index 0205fd56d975..5a3e06d6219b 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts +++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts @@ -8,413 +8,10 @@ /dts-v1/; #include "imx6ul-kontron-n6310-som.dtsi" +#include "imx6ul-kontron-n6x1x-s.dtsi" / { model = "Kontron N6310 S"; compatible = "kontron,imx6ul-n6310-s", "kontron,imx6ul-n6310-som", "fsl,imx6ul"; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_leds>; - - led1 { - label = "debug-led1"; - gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; - default-state = "off"; - linux,default-trigger = "heartbeat"; - }; - - led2 { - label = "debug-led2"; - gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - led3 { - label = "debug-led3"; - gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - }; - - pwm-beeper { - compatible = "pwm-beeper"; - pwms = <&pwm8 0 5000>; - }; - - reg_3v3: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - reg_usb_otg1_vbus: regulator-usb-otg1-vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_otg1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_vref_adc: regulator-vref-adc { - compatible = "regulator-fixed"; - regulator-name = "vref-adc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; -}; - -&adc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_adc1>; - num-channels = <3>; - vref-supply = <®_vref_adc>; - status = "okay"; -}; - -&can2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan2>; - status = "okay"; -}; - -&ecspi1 { - cs-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1>; - status = "okay"; - - eeprom@0 { - compatible = "anvo,anv32e61w", "atmel,at25"; - reg = <0>; - spi-max-frequency = <20000000>; - spi-cpha; - spi-cpol; - pagesize = <1>; - size = <8192>; - address-width = <16>; - }; -}; - -&fec1 { - pinctrl-0 = <&pinctrl_enet1>; - /delete-node/ mdio; -}; - -&fec2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>; - phy-mode = "rmii"; - phy-handle = <ðphy2>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy1: ethernet-phy@1 { - reg = <1>; - micrel,led-mode = <0>; - clocks = <&clks IMX6UL_CLK_ENET_REF>; - clock-names = "rmii-ref"; - }; - - ethphy2: ethernet-phy@2 { - reg = <2>; - micrel,led-mode = <0>; - clocks = <&clks IMX6UL_CLK_ENET2_REF>; - clock-names = "rmii-ref"; - }; - }; -}; - -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; -}; - -&i2c4 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c4>; - status = "okay"; - - rtc@32 { - compatible = "epson,rx8900"; - reg = <0x32>; - }; -}; - -&pwm8 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm8>; - status = "okay"; -}; - -&snvs_poweroff { - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - linux,rs485-enabled-at-boot-time; - rs485-rx-during-tx; - rs485-rts-active-low; - uart-has-rtscts; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; - status = "okay"; -}; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart4>; - status = "okay"; -}; - -&usbotg1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg1>; - dr_mode = "otg"; - srp-disable; - hnp-disable; - adp-disable; - vbus-supply = <®_usb_otg1_vbus>; - status = "okay"; -}; - -&usbotg2 { - dr_mode = "host"; - disable-over-current; - status = "okay"; -}; - -&usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; - cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; - keep-power-in-suspend; - wakeup-source; - vmmc-supply = <®_3v3>; - voltage-ranges = <3300 3300>; - no-1-8-v; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc2>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>; - non-removable; - keep-power-in-suspend; - wakeup-source; - vmmc-supply = <®_3v3>; - voltage-ranges = <3300 3300>; - no-1-8-v; - status = "okay"; -}; - -&wdog1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdog>; - fsl,ext-reset-output; - status = "okay"; -}; - -&iomuxc { - pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>; - - pinctrl_adc1: adc1grp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 - MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 - MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0xb0 - >; - }; - - /* FRAM */ - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX6UL_PAD_CSI_DATA07__ECSPI1_MISO 0x100b1 - MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI 0x100b1 - MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK 0x100b1 - MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x100b1 /* ECSPI1-CS1 */ - >; - }; - - pinctrl_enet2: enet2grp { - fsl,pins = < - MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 - MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 - MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 - MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 - MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 - MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 - MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 - MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b009 - >; - }; - - pinctrl_enet2_mdio: enet2mdiogrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 - MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 - >; - }; - - pinctrl_flexcan2: flexcan2grp{ - fsl,pins = < - MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 - MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 - >; - }; - - pinctrl_gpio: gpiogrp { - fsl,pins = < - MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0 /* DOUT1 */ - MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x1b0b0 /* DIN1 */ - MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x1b0b0 /* DOUT2 */ - MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0b0 /* DIN2 */ - >; - }; - - pinctrl_gpio_leds: gpioledsgrp { - fsl,pins = < - MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x1b0b0 /* LED H14 */ - MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x1b0b0 /* LED H15 */ - MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 /* LED H16 */ - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001b8b0 - MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001b8b0 - >; - }; - - pinctrl_i2c4: i2c4grp { - fsl,pins = < - MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x4001f8b0 - MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x4001f8b0 - >; - }; - - pinctrl_pwm8: pwm8grp { - fsl,pins = < - MX6UL_PAD_CSI_HSYNC__PWM8_OUT 0x110b0 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 - MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6UL_PAD_NAND_DATA04__UART2_DCE_TX 0x1b0b1 - MX6UL_PAD_NAND_DATA05__UART2_DCE_RX 0x1b0b1 - MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS 0x1b0b1 - /* - * mux unused RTS to make sure it doesn't cause - * any interrupts when it is undefined - */ - MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS 0x1b0b1 - >; - }; - - pinctrl_uart3: uart3grp { - fsl,pins = < - MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 - MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 - MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b1 - MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b1 - >; - }; - - pinctrl_uart4: uart4grp { - fsl,pins = < - MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x1b0b1 - MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x1b0b1 - >; - }; - - pinctrl_usbotg1: usbotg1 { - fsl,pins = < - MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x1b0b0 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 - MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 - MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 - MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 - MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 - MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x100b1 /* SD1_CD */ - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10059 - MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 - MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 - MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 - MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 - MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 - >; - }; - - pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { - fsl,pins = < - MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100b9 - MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170b9 - MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170b9 - MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170b9 - MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170b9 - MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170b9 - >; - }; - - pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { - fsl,pins = < - MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9 - MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9 - MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9 - MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9 - MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9 - MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9 - >; - }; - - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x30b0 - >; - }; }; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi index a896b2348dd2..47d3ce5d255f 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi +++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi @@ -6,7 +6,7 @@ */ #include "imx6ul.dtsi" -#include <dt-bindings/gpio/gpio.h> +#include "imx6ul-kontron-n6x1x-som-common.dtsi" / { model = "Kontron N6310 SOM"; @@ -18,49 +18,7 @@ }; }; -&ecspi2 { - cs-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi2>; - status = "okay"; - - spi-flash@0 { - compatible = "mxicy,mx25v8035f", "jedec,spi-nor"; - spi-max-frequency = <50000000>; - reg = <0>; - }; -}; - -&fec1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio>; - phy-mode = "rmii"; - phy-handle = <ðphy1>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy1: ethernet-phy@1 { - reg = <1>; - micrel,led-mode = <0>; - clocks = <&clks IMX6UL_CLK_ENET_REF>; - clock-names = "rmii-ref"; - }; - }; -}; - -&fec2 { - phy-mode = "rmii"; - status = "disabled"; -}; - &qspi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_qspi>; - status = "okay"; - spi-flash@0 { #address-cells = <1>; #size-cells = <1>; @@ -81,54 +39,3 @@ }; }; }; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reset_out>; - - pinctrl_ecspi2: ecspi2grp { - fsl,pins = < - MX6UL_PAD_CSI_DATA03__ECSPI2_MISO 0x100b1 - MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI 0x100b1 - MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK 0x100b1 - MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x100b1 - >; - }; - - pinctrl_enet1: enet1grp { - fsl,pins = < - MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 - MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 - MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 - MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 - MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 - MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 - MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 - MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b009 - >; - }; - - pinctrl_enet1_mdio: enet1mdiogrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 - MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 - >; - }; - - pinctrl_qspi: qspigrp { - fsl,pins = < - MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a1 - MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1 - MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a1 - MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a1 - MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a1 - MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1 - >; - }; - - pinctrl_reset_out: rstoutgrp { - fsl,pins = < - MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0 - >; - }; -}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts b/arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts new file mode 100644 index 000000000000..239a1af3aeaa --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + */ + +/dts-v1/; + +#include "imx6ul-kontron-n6311-som.dtsi" +#include "imx6ul-kontron-n6x1x-s.dtsi" + +/ { + model = "Kontron N6311 S"; + compatible = "kontron,imx6ul-n6311-s", "kontron,imx6ul-n6311-som", + "fsl,imx6ul"; +}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi new file mode 100644 index 000000000000..a095a7654ac6 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + */ + +#include "imx6ul.dtsi" +#include "imx6ul-kontron-n6x1x-som-common.dtsi" + +/ { + model = "Kontron N6311 SOM"; + compatible = "kontron,imx6ul-n6311-som", "fsl,imx6ul"; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + device_type = "memory"; + }; +}; + +&qspi { + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-nand"; + spi-max-frequency = <104000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + reg = <0>; + + partition@0 { + label = "ubi1"; + reg = <0x00000000 0x08000000>; + }; + + partition@8000000 { + label = "ubi2"; + reg = <0x08000000 0x18000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi new file mode 100644 index 000000000000..f05e91841202 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi @@ -0,0 +1,418 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org> + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led1 { + label = "debug-led1"; + gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + }; + + led2 { + label = "debug-led2"; + gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led3 { + label = "debug-led3"; + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + pwm-beeper { + compatible = "pwm-beeper"; + pwms = <&pwm8 0 5000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_vref_adc: regulator-vref-adc { + compatible = "regulator-fixed"; + regulator-name = "vref-adc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&adc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc1>; + num-channels = <3>; + vref-supply = <®_vref_adc>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&ecspi1 { + cs-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + eeprom@0 { + compatible = "anvo,anv32e61w", "atmel,at25"; + reg = <0>; + spi-max-frequency = <20000000>; + spi-cpha; + spi-cpol; + pagesize = <1>; + size = <8192>; + address-width = <16>; + }; +}; + +&fec1 { + pinctrl-0 = <&pinctrl_enet1>; + /delete-node/ mdio; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>; + phy-mode = "rmii"; + phy-handle = <ðphy2>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + reg = <1>; + micrel,led-mode = <0>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + }; + + ethphy2: ethernet-phy@2 { + reg = <2>; + micrel,led-mode = <0>; + clocks = <&clks IMX6UL_CLK_ENET2_REF>; + clock-names = "rmii-ref"; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; +}; + +&pwm8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm8>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + linux,rs485-enabled-at-boot-time; + rs485-rx-during-tx; + rs485-rts-active-low; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + dr_mode = "otg"; + srp-disable; + hnp-disable; + adp-disable; + over-current-active-low; + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + vbus-supply = <®_5v>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_3v3>; + voltage-ranges = <3300 3300>; + no-1-8-v; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + non-removable; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_3v3>; + voltage-ranges = <3300 3300>; + no-1-8-v; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>; + + pinctrl_adc1: adc1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0xb0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA07__ECSPI1_MISO 0x100b1 + MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI 0x100b1 + MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK 0x100b1 + MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x100b1 /* ECSPI1-CS1 */ + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b009 + >; + }; + + pinctrl_enet2_mdio: enet2mdiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp{ + fsl,pins = < + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 + >; + }; + + pinctrl_gpio: gpiogrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0 /* DOUT1 */ + MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x1b0b0 /* DIN1 */ + MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x1b0b0 /* DOUT2 */ + MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0b0 /* DIN2 */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x1b0b0 /* LED H14 */ + MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x1b0b0 /* LED H15 */ + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 /* LED H16 */ + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x4001f8b0 + MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x4001f8b0 + >; + }; + + pinctrl_pwm8: pwm8grp { + fsl,pins = < + MX6UL_PAD_CSI_HSYNC__PWM8_OUT 0x110b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6UL_PAD_NAND_DATA04__UART2_DCE_TX 0x1b0b1 + MX6UL_PAD_NAND_DATA05__UART2_DCE_RX 0x1b0b1 + MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS 0x1b0b1 + /* + * mux unused RTS to make sure it doesn't cause + * any interrupts when it is undefined + */ + MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 + MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b1 + MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x1b0b1 + MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usbotg1: usbotg1 { + fsl,pins = < + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x1b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x100b1 /* SD1_CD */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10059 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100b9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170b9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170b9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170b9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170b9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x30b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi new file mode 100644 index 000000000000..a17af4d9bfdf --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org> + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + chosen { + stdout-path = &uart4; + }; +}; + +&ecspi2 { + cs-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; + + spi-flash@0 { + compatible = "mxicy,mx25v8035f", "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + reg = <1>; + micrel,led-mode = <0>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + }; + }; +}; + +&fec2 { + phy-mode = "rmii"; + status = "disabled"; +}; + +&qspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reset_out>; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA03__ECSPI2_MISO 0x100b1 + MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI 0x100b1 + MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK 0x100b1 + MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x100b1 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b009 + >; + }; + + pinctrl_enet1_mdio: enet1mdiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + >; + }; + + pinctrl_qspi: qspigrp { + fsl,pins = < + MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a1 + MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1 + MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a1 + MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a1 + MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a1 + MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1 + >; + }; + + pinctrl_reset_out: rstoutgrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi index cf7faf4b9c47..6ce84f92b027 100644 --- a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi @@ -1,193 +1,6 @@ -/* - * Copyright 2017 Armadeus Systems <support@armadeus.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2017 Armadeus Systems <support@armadeus.com> #include "imx6ul.dtsi" - -/ { - memory@80000000 { - device_type = "memory"; - reg = <0x80000000 0>; /* will be filled by U-Boot */ - }; - - reg_3v3: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - usdhc3_pwrseq: usdhc3-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>; - }; -}; - -&fec1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet1>; - phy-mode = "rmii"; - phy-reset-duration = <1>; - phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; - phy-handle = <ðphy1>; - phy-supply = <®_3v3>; - status = "okay"; - - mdio: mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy1: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - interrupt-parent = <&gpio4>; - interrupts = <16 IRQ_TYPE_LEVEL_LOW>; - status = "okay"; - }; - }; -}; - -/* Bluetooth */ -&uart8 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart8>; - uart-has-rtscts; - status = "okay"; -}; - -/* eMMC */ -&usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; - bus-width = <8>; - no-1-8-v; - non-removable; - status = "okay"; -}; - -/* WiFi */ -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - bus-width = <4>; - no-1-8-v; - non-removable; - mmc-pwrseq = <&usdhc3_pwrseq>; - status = "okay"; - - #address-cells = <1>; - #size-cells = <0>; - - brcmf: wifi@1 { - compatible = "brcm,bcm4329-fmac"; - reg = <1>; - interrupt-parent = <&gpio2>; - interrupts = <8 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "host-wake"; - }; -}; - -&iomuxc { - pinctrl_enet1: enet1grp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 - MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 - MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x130b0 - MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x130b0 - MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x130b0 - MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x130b0 - MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 - MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 - MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 - /* INT# */ - MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x1b0b0 - /* RST# */ - MX6UL_PAD_NAND_DATA00__GPIO4_IO02 0x130b0 - MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 - >; - }; - - pinctrl_uart8: uart8grp { - fsl,pins = < - MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX 0x1b0b0 - MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX 0x1b0b0 - MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS 0x1b0b0 - MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS 0x1b0b0 - /* BT_REG_ON */ - MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x130b0 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 - MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 - MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 - MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 - MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 - MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17059 - MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17059 - MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17059 - MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17059 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x1b0b0 - MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x100b0 - MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x1b0b0 - MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x1b0b0 - MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x1b0b0 - MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x1b0b0 - /* WL_REG_ON */ - MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x130b0 - /* WL_IRQ */ - MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0 - >; - }; -}; +#include "imx6ul-imx6ull-opos6ul.dtsi" diff --git a/arch/arm/boot/dts/imx6ul-opos6uldev.dts b/arch/arm/boot/dts/imx6ul-opos6uldev.dts index 8ecdb9ad2b2e..375b98d7205a 100644 --- a/arch/arm/boot/dts/imx6ul-opos6uldev.dts +++ b/arch/arm/boot/dts/imx6ul-opos6uldev.dts @@ -1,293 +1,21 @@ -/* - * Copyright 2017 Armadeus Systems <support@armadeus.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2017 Armadeus Systems <support@armadeus.com> /dts-v1/; #include "imx6ul-opos6ul.dtsi" +#include "imx6ul-imx6ull-opos6uldev.dtsi" / { - model = "Armadeus Systems OPOS6UL SoM on OPOS6ULDev board"; - compatible = "armadeus,opos6uldev", "armadeus,opos6ul", "fsl,imx6ul"; - - chosen { - stdout-path = &uart1; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm3 0 191000>; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <7>; - power-supply = <®_5v>; - status = "okay"; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_keys>; - - user-button { - label = "User button"; - gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; - linux,code = <BTN_MISC>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - - user-led { - label = "User"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_led>; - gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; - - onewire { - compatible = "w1-gpio"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_w1>; - gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; - }; - - panel: panel { - compatible = "armadeus,st0700-adapt"; - power-supply = <®_3v3>; - backlight = <&backlight>; - - port { - panel_in: endpoint { - remote-endpoint = <&lcdif_out>; - }; - }; - }; - - reg_5v: regulator-5v { - compatible = "regulator-fixed"; - regulator-name = "5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_usbotg1_vbus: regulator-usbotg1vbus { - compatible = "regulator-fixed"; - regulator-name = "usbotg1vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg1_vbus>; - gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_usbotg2_vbus: regulator-usbotg2vbus { - compatible = "regulator-fixed"; - regulator-name = "usbotg2vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg2_vbus>; - gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -&adc1 { - vref-supply = <®_3v3>; - status = "okay"; -}; - -&can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan1>; - xceiver-supply = <®_5v>; - status = "okay"; -}; - -&can2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan2>; - xceiver-supply = <®_5v>; - status = "okay"; -}; - -&ecspi4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi4>; - cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>; - status = "okay"; - - spidev0: spi@0 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <5000000>; - }; - - spidev1: spi@1 { - compatible = "spidev"; - reg = <1>; - spi-max-frequency = <5000000>; - }; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - clock_frequency = <400000>; - status = "okay"; -}; - -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - clock_frequency = <400000>; - status = "okay"; -}; - -&lcdif { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcdif>; - status = "okay"; - - port { - lcdif_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; -}; - -&pwm3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm3>; - status = "okay"; -}; - -&snvs_pwrkey { - status = "disabled"; -}; - -&tsc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_tsc>; - xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; - measure-delay-time = <0xffff>; - pre-charge-time = <0xffff>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&usbotg1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg1_id>; - vbus-supply = <®_usbotg1_vbus>; - dr_mode = "otg"; - disable-over-current; - status = "okay"; -}; - -&usbotg2 { - vbus-supply = <®_usbotg2_vbus>; - dr_mode = "host"; - disable-over-current; - status = "okay"; + model = "Armadeus Systems OPOS6UL SoM (i.MX6UL) on OPOS6ULDev board"; + compatible = "armadeus,imx6ul-opos6uldev", "armadeus,imx6ul-opos6ul", "fsl,imx6ul"; }; &iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpios>; + pinctrl-0 = <&pinctrl_gpios>, <&pinctrl_tamper_gpios>; - pinctrl_ecspi4: ecspi4grp { + pinctrl_tamper_gpios: tampergpiosgrp { fsl,pins = < - MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK 0x1b0b0 - MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI 0x1b0b0 - MX6UL_PAD_NAND_DATA06__ECSPI4_MISO 0x1b0b0 - MX6UL_PAD_NAND_DATA01__GPIO4_IO03 0x1b0b0 - MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x1b0b0 - >; - }; - - pinctrl_flexcan1: flexcan1grp { - fsl,pins = < - MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0 - MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0 - >; - }; - - pinctrl_flexcan2: flexcan2grp { - fsl,pins = < - MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0 - MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0 - >; - }; - - pinctrl_gpios: gpiosgrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x0b0b0 - MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x0b0b0 - MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x0b0b0 - MX6UL_PAD_NAND_RE_B__GPIO4_IO00 0x0b0b0 - MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x0b0b0 - MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0b0b0 - MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0b0b0 - MX6UL_PAD_NAND_WE_B__GPIO4_IO01 0x0b0b0 MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0b0b0 MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0b0b0 MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0b0b0 @@ -299,100 +27,6 @@ >; }; - pinctrl_gpio_keys: gpiokeysgrp { - fsl,pins = < - MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x0b0b0 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 - MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 - >; - }; - - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 - MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 - >; - }; - - pinctrl_lcdif: lcdifgrp { - fsl,pins = < - MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x100b1 - MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x100b1 - MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x100b1 - MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x100b1 - MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x100b1 - MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x100b1 - MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x100b1 - MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x100b1 - MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x100b1 - MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x100b1 - MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x100b1 - MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x100b1 - MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x100b1 - MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x100b1 - MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x100b1 - MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x100b1 - MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x100b1 - MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x100b1 - MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x100b1 - MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x100b1 - MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x100b1 - MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x100b1 - >; - }; - - pinctrl_led: ledgrp { - fsl,pins = < - MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0b0b0 - >; - }; - - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6UL_PAD_NAND_ALE__PWM3_OUT 0x1b0b0 - >; - }; - - pinctrl_tsc: tscgrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 - MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 - MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 - MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 - MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 - MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 - >; - }; - - pinctrl_usbotg1_id: usbotg1idgrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x1b0b0 - >; - }; - - pinctrl_usbotg1_vbus: usbotg1vbusgrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x1b0b0 - >; - }; - pinctrl_usbotg2_vbus: usbotg2vbusgrp { fsl,pins = < MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0 diff --git a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi index 41f3b7f62bbf..88f631c8fabb 100644 --- a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi @@ -20,7 +20,7 @@ * Set the minimum memory size here and * let the bootloader set the real size. */ - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x8000000>; }; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index f008036e9294..d9fdca12819b 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -558,7 +558,7 @@ anatop: anatop@20c8000 { compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop", - "syscon", "simple-bus"; + "syscon", "simple-mfd"; reg = <0x020c8000 0x1000>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, @@ -711,6 +711,7 @@ clocks = <&clks IMX6UL_CLK_GPT2_BUS>, <&clks IMX6UL_CLK_GPT2_SERIAL>; clock-names = "ipg", "per"; + status = "disabled"; }; sdma: sdma@20ec000 { diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi index b6147c76d159..a78849fd2afa 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi @@ -8,6 +8,20 @@ stdout-path = "serial0:115200n8"; }; + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_snvs_gpiokeys>; + + power { + label = "Wake-Up"; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; + /* fixed crystal dedicated to mcp2515 */ clk16m: clk16m { compatible = "fixed-clock"; diff --git a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi index fb213bec4654..95a11b8bcbdb 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi @@ -15,7 +15,7 @@ &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 - &pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio6>; + &pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio6 &pinctrl_gpio7>; }; &iomuxc_snvs { diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi index 038d8c90f6df..a0545431b3dc 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi @@ -26,7 +26,7 @@ &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 - &pinctrl_gpio4 &pinctrl_gpio5>; + &pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio7>; }; diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi index d56728f03c35..6d850d997e1e 100644 --- a/arch/arm/boot/dts/imx6ull-colibri.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi @@ -54,6 +54,18 @@ vref-supply = <®_module_3v3_avdd>; }; +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "disabled"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "disabled"; +}; + /* Colibri SPI */ &ecspi1 { cs-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; @@ -62,8 +74,9 @@ }; &fec2 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&pinctrl_enet2>; + pinctrl-1 = <&pinctrl_enet2_sleep>; phy-mode = "rmii"; phy-handle = <ðphy1>; status = "okay"; @@ -198,6 +211,12 @@ assigned-clock-rates = <0>, <198000000>; }; +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; +}; + &iomuxc { pinctrl_can_int: canint-grp { fsl,pins = < @@ -220,6 +239,21 @@ >; }; + pinctrl_enet2_sleep: enet2sleepgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO06__GPIO1_IO06 0x0 + MX6UL_PAD_GPIO1_IO07__GPIO1_IO07 0x0 + MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x0 + MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x0 + MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x0 + MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 + MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x0 + MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12 0x0 + MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x0 + >; + }; + pinctrl_ecspi1_cs: ecspi1-cs-grp { fsl,pins = < MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x000a0 @@ -234,6 +268,13 @@ >; }; + pinctrl_flexcan1: flexcan1-grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX 0x1b020 + MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX 0x1b020 + >; + }; + pinctrl_flexcan2: flexcan2-grp { fsl,pins = < MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX 0x1b020 @@ -249,8 +290,6 @@ pinctrl_gpio1: gpio1-grp { fsl,pins = < - MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00 0x74 /* SODIMM 55 */ - MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01 0x74 /* SODIMM 63 */ MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0X14 /* SODIMM 77 */ MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x14 /* SODIMM 99 */ MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0x14 /* SODIMM 133 */ @@ -303,6 +342,13 @@ >; }; + pinctrl_gpio7: gpio7-grp { /* CAN1 */ + fsl,pins = < + MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00 0x74 /* SODIMM 55 */ + MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01 0x74 /* SODIMM 63 */ + >; + }; + pinctrl_gpmi_nand: gpmi-nand-grp { fsl,pins = < MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x100a9 @@ -490,6 +536,12 @@ MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT 0x14 >; }; + + pinctrl_wdog: wdog-grp { + fsl,pins = < + MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0 + >; + }; }; &iomuxc_snvs { @@ -517,19 +569,19 @@ pinctrl_snvs_ad7879_int: snvs-ad7879-int-grp { /* TOUCH Interrupt */ fsl,pins = < - MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b0b0 + MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x100b0 >; }; pinctrl_snvs_reg_sd: snvs-reg-sd-grp { fsl,pins = < - MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x4001b8b0 + MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x400100b0 >; }; pinctrl_snvs_usbc_det: snvs-usbc-det-grp { fsl,pins = < - MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 + MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x130b0 >; }; diff --git a/arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts b/arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts new file mode 100644 index 000000000000..57588a5e1e34 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +/dts-v1/; + +#include "imx6ull-kontron-n6411-som.dtsi" +#include "imx6ul-kontron-n6x1x-s.dtsi" + +/ { + model = "Kontron N6411 S"; + compatible = "kontron,imx6ull-n6411-s", "kontron,imx6ull-n6411-som", + "fsl,imx6ull"; +}; diff --git a/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi b/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi new file mode 100644 index 000000000000..b7e984284e1a --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + */ + +#include "imx6ull.dtsi" +#include "imx6ul-kontron-n6x1x-som-common.dtsi" + +/ { + model = "Kontron N6411 SOM"; + compatible = "kontron,imx6ull-n6311-som", "fsl,imx6ull"; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + device_type = "memory"; + }; +}; + +&qspi { + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-nand"; + spi-max-frequency = <104000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + reg = <0>; + + partition@0 { + label = "ubi1"; + reg = <0x00000000 0x08000000>; + }; + + partition@8000000 { + label = "ubi2"; + reg = <0x08000000 0x18000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6ull-opos6ul.dtsi b/arch/arm/boot/dts/imx6ull-opos6ul.dtsi new file mode 100644 index 000000000000..155f941f2811 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-opos6ul.dtsi @@ -0,0 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2019 Armadeus Systems <support@armadeus.com> + +#include "imx6ull.dtsi" +#include "imx6ul-imx6ull-opos6ul.dtsi" diff --git a/arch/arm/boot/dts/imx6ull-opos6uldev.dts b/arch/arm/boot/dts/imx6ull-opos6uldev.dts new file mode 100644 index 000000000000..198fdb72641b --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-opos6uldev.dts @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2019 Armadeus Systems <support@armadeus.com> + +/dts-v1/; +#include "imx6ull-opos6ul.dtsi" +#include "imx6ul-imx6ull-opos6uldev.dtsi" + +/ { + model = "Armadeus Systems OPOS6UL SoM (i.MX6ULL) on OPOS6ULDev board"; + compatible = "armadeus,imx6ull-opos6uldev", "armadeus,imx6ull-opos6ul", "fsl,imx6ull"; +}; + +&iomuxc_snvs { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tamper_gpios>; + + pinctrl_tamper_gpios: tampergpiosgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0b0b0 + MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0b0b0 + MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0b0b0 + MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0 + MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0b0 + MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x0b0b0 + MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x0b0b0 + MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x0b0b0 + >; + }; + + pinctrl_usbotg2_vbus: usbotg2vbusgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0 + >; + }; + + pinctrl_w1: w1grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x0b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi index 3f2746169181..6aa123cbdadb 100644 --- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi @@ -52,6 +52,20 @@ clock-frequency = <16000000>; }; + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + + power { + label = "Wake-Up"; + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; + panel: panel { compatible = "edt,et057090dhu"; backlight = <&bl>; @@ -131,6 +145,21 @@ &i2c4 { status = "okay"; + /* + * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>, + * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms + */ + touchscreen@4a { + compatible = "atmel,maxtouch"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiotouch>; + reg = <0x4a>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 */ + reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; /* SODIMM 30 */ + status = "disabled"; + }; + /* M41T0M6 real time clock on carrier board */ rtc: m41t0m6@68 { compatible = "st,m41t0"; @@ -186,3 +215,12 @@ vmmc-supply = <®_3v3>; status = "okay"; }; + +&iomuxc { + pinctrl_gpiotouch: touchgpios { + fsl,pins = < + MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x74 + MX7D_PAD_GPIO1_IO10__GPIO1_IO10 0x14 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index 917eb0b58b13..d05be3f0e2a7 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -322,7 +322,6 @@ &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>; - no-1-8-v; cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; disable-wp; vqmmc-supply = <®_LDO2>; @@ -667,6 +666,28 @@ >; }; + pinctrl_usdhc1_100mhz: usdhc1grp_100mhz { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5a + MX7D_PAD_SD1_CLK__SD1_CLK 0x1a + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp_200mhz { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5b + MX7D_PAD_SD1_CLK__SD1_CLK 0x1b + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX7D_PAD_SD3_CMD__SD3_CMD 0x59 @@ -737,12 +758,17 @@ pinctrl_gpio_lpsr: gpio1-grp { fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x59 MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x59 MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3 0x59 >; }; + pinctrl_gpiokeys: gpiokeysgrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x19 + >; + }; + pinctrl_i2c1: i2c1-grp { fsl,pins = < MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA 0x4000007f diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 9c8dd32cc035..d8acd7cc7918 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -22,6 +22,7 @@ reg = <1>; clock-frequency = <996000000>; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; cpu-idle-states = <&cpu_sleep_wait>; }; }; @@ -43,7 +44,8 @@ opp-hz = /bits/ 64 <792000000>; opp-microvolt = <1000000>; clock-latency-ns = <150000>; - opp-supported-hw = <0xf>, <0xf>; + opp-supported-hw = <0xd>, <0xf>; + opp-suspend; }; opp-996000000 { @@ -51,6 +53,7 @@ opp-microvolt = <1100000>; clock-latency-ns = <150000>; opp-supported-hw = <0xc>, <0xf>; + opp-suspend; }; opp-1200000000 { @@ -58,6 +61,7 @@ opp-microvolt = <1225000>; clock-latency-ns = <150000>; opp-supported-hw = <0x8>, <0xf>; + opp-suspend; }; }; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index e2e604d6ba0b..1b812f4e7453 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -559,7 +559,7 @@ anatop: anatop@30360000 { compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop", - "syscon", "simple-bus"; + "syscon", "simple-mfd"; reg = <0x30360000 0x10000>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx7ulp-evk.dts b/arch/arm/boot/dts/imx7ulp-evk.dts index 4245b33bb451..a863a2b337d6 100644 --- a/arch/arm/boot/dts/imx7ulp-evk.dts +++ b/arch/arm/boot/dts/imx7ulp-evk.dts @@ -77,6 +77,8 @@ }; &usdhc0 { + assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC0>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_APLL_PFD1>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc0>; cd-gpios = <&gpio_ptc 10 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi index 6859a3a83750..d37a1927c88e 100644 --- a/arch/arm/boot/dts/imx7ulp.dtsi +++ b/arch/arm/boot/dts/imx7ulp.dtsi @@ -87,13 +87,6 @@ #clock-cells = <0>; }; - mpll: clock-mpll { - compatible = "fixed-clock"; - clock-frequency = <480000000>; - clock-output-names = "mpll"; - #clock-cells = <0>; - }; - ahbbridge0: bus@40000000 { compatible = "simple-bus"; #address-cells = <1>; @@ -230,8 +223,6 @@ <&scg1 IMX7ULP_CLK_NIC1_DIV>, <&pcc2 IMX7ULP_CLK_USDHC0>; clock-names = "ipg", "ahb", "per"; - assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC0>; - assigned-clock-parents = <&scg1 IMX7ULP_CLK_NIC1_DIV>; bus-width = <4>; fsl,tuning-start-tap = <20>; fsl,tuning-step = <2>; @@ -246,8 +237,6 @@ <&scg1 IMX7ULP_CLK_NIC1_DIV>, <&pcc2 IMX7ULP_CLK_USDHC1>; clock-names = "ipg", "ahb", "per"; - assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC1>; - assigned-clock-parents = <&scg1 IMX7ULP_CLK_NIC1_DIV>; bus-width = <4>; fsl,tuning-start-tap = <20>; fsl,tuning-step = <2>; @@ -258,12 +247,22 @@ compatible = "fsl,imx7ulp-scg1"; reg = <0x403e0000 0x10000>; clocks = <&rosc>, <&sosc>, <&sirc>, - <&firc>, <&upll>, <&mpll>; + <&firc>, <&upll>; clock-names = "rosc", "sosc", "sirc", - "firc", "upll", "mpll"; + "firc", "upll"; #clock-cells = <1>; }; + wdog1: watchdog@403d0000 { + compatible = "fsl,imx7ulp-wdt"; + reg = <0x403d0000 0x10000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc2 IMX7ULP_CLK_WDG1>; + assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>; + assigned-clocks-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>; + timeout-sec = <40>; + }; + pcc2: clock-controller@403f0000 { compatible = "fsl,imx7ulp-pcc2"; reg = <0x403f0000 0x10000>; @@ -276,13 +275,12 @@ <&scg1 IMX7ULP_CLK_APLL_PFD0>, <&scg1 IMX7ULP_CLK_UPLL>, <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>, - <&scg1 IMX7ULP_CLK_MIPI_PLL>, <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>, <&scg1 IMX7ULP_CLK_ROSC>, <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>; clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk", "apll_pfd2", "apll_pfd1", "apll_pfd0", - "upll", "sosc_bus_clk", "mpll", + "upll", "sosc_bus_clk", "firc_bus_clk", "rosc", "spll_bus_clk"; assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM5>; assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>; @@ -309,13 +307,12 @@ <&scg1 IMX7ULP_CLK_APLL_PFD0>, <&scg1 IMX7ULP_CLK_UPLL>, <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>, - <&scg1 IMX7ULP_CLK_MIPI_PLL>, <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>, <&scg1 IMX7ULP_CLK_ROSC>, <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>; clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk", "apll_pfd2", "apll_pfd1", "apll_pfd0", - "upll", "sosc_bus_clk", "mpll", + "upll", "sosc_bus_clk", "firc_bus_clk", "rosc", "spll_bus_clk"; }; }; diff --git a/arch/arm/boot/dts/keystone-clocks.dtsi b/arch/arm/boot/dts/keystone-clocks.dtsi index 457515b0736a..0397c3423d2d 100644 --- a/arch/arm/boot/dts/keystone-clocks.dtsi +++ b/arch/arm/boot/dts/keystone-clocks.dtsi @@ -408,4 +408,31 @@ clocks { reg-names = "control", "domain"; domain-id = <0>; }; + + /* + * Below are set of fixed, input clocks definitions, + * for which real frequencies have to be defined in board files. + * Those clocks can be used as reference clocks for some HW modules + * (as cpts, for example) by configuring corresponding clock muxes. + */ + timi0: timi0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "timi0"; + }; + + timi1: timi1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "timi1"; + }; + + tsrefclk: tsrefclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "tsrefclk"; + }; }; diff --git a/arch/arm/boot/dts/keystone-k2e-clocks.dtsi b/arch/arm/boot/dts/keystone-k2e-clocks.dtsi index f7592155a740..cf30e007fea3 100644 --- a/arch/arm/boot/dts/keystone-k2e-clocks.dtsi +++ b/arch/arm/boot/dts/keystone-k2e-clocks.dtsi @@ -71,4 +71,24 @@ clocks { reg-names = "control", "domain"; domain-id = <29>; }; + + /* + * Below are set of fixed, input clocks definitions, + * for which real frequencies have to be defined in board files. + * Those clocks can be used as reference clocks for some HW modules + * (as cpts, for example) by configuring corresponding clock muxes. + */ + tsipclka: tsipclka { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "tsipclka"; + }; + + tsipclkb: tsipclkb { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "tsipclkb"; + }; }; diff --git a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi index 1db17ec744b1..ad15e77874b1 100644 --- a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi @@ -135,8 +135,8 @@ netcp: netcp@24000000 { /* NetCP address range */ ranges = <0 0x24000000 0x1000000>; - clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>; - clock-names = "pa_clk", "ethss_clk", "cpts"; + clocks = <&clkpa>, <&clkcpgmac>; + clock-names = "pa_clk", "ethss_clk"; dma-coherent; ti,navigator-dmas = <&dma_gbe 0>, @@ -156,6 +156,23 @@ netcp: netcp@24000000 { tx-queue = <896>; tx-channel = "nettx"; + cpts { + clocks = <&cpts_refclk_mux>; + clock-names = "cpts"; + + cpts_refclk_mux: cpts-refclk-mux { + #clock-cells = <0>; + clocks = <&chipclk12>, <&chipclk13>, + <&timi0>, <&timi1>, + <&tsipclka>, <&tsrefclk>, + <&tsipclkb>; + ti,mux-tbl = <0x0>, <0x1>, <0x2>, + <0x3>, <0x4>, <0x8>, <0xC>; + assigned-clocks = <&cpts_refclk_mux>; + assigned-clock-parents = <&chipclk12>; + }; + }; + interfaces { gbe0: interface-0 { slave-port = <0>; diff --git a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi index e203145acbea..d5a6c1f5633c 100644 --- a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi @@ -152,8 +152,8 @@ netcp: netcp@2000000 { /* NetCP address range */ ranges = <0 0x2000000 0x100000>; - clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>; - clock-names = "pa_clk", "ethss_clk", "cpts"; + clocks = <&clkpa>, <&clkcpgmac>; + clock-names = "pa_clk", "ethss_clk"; dma-coherent; ti,navigator-dmas = <&dma_gbe 22>, @@ -175,6 +175,22 @@ netcp: netcp@2000000 { tx-queue = <648>; tx-channel = "nettx"; + cpts { + clocks = <&cpts_refclk_mux>; + clock-names = "cpts"; + + cpts_refclk_mux: cpts-refclk-mux { + #clock-cells = <0>; + clocks = <&chipclk12>, <&chipclk13>, + <&timi0>, <&timi1>, + <&tsrefclk>; + ti,mux-tbl = <0x0>, <0x1>, <0x2>, + <0x3>, <0x8>; + assigned-clocks = <&cpts_refclk_mux>; + assigned-clock-parents = <&chipclk12>; + }; + }; + interfaces { gbe0: interface-0 { slave-port = <0>; diff --git a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi index a2e47bad3307..c1f982604145 100644 --- a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi @@ -134,8 +134,8 @@ netcp: netcp@26000000 { /* NetCP address range */ ranges = <0 0x26000000 0x1000000>; - clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>; - clock-names = "pa_clk", "ethss_clk", "cpts"; + clocks = <&clkpa>, <&clkcpgmac>; + clock-names = "pa_clk", "ethss_clk"; dma-coherent; ti,navigator-dmas = <&dma_gbe 0>, @@ -155,6 +155,22 @@ netcp: netcp@26000000 { tx-queue = <896>; tx-channel = "nettx"; + cpts { + clocks = <&cpts_refclk_mux>; + clock-names = "cpts"; + + cpts_refclk_mux: cpts-refclk-mux { + #clock-cells = <0>; + clocks = <&chipclk12>, <&chipclk13>, + <&timi0>, <&timi1>, + <&tsrefclk>; + ti,mux-tbl = <0x0>, <0x1>, <0x2>, + <0x3>, <0x8>; + assigned-clocks = <&cpts_refclk_mux>; + assigned-clock-parents = <&chipclk12>; + }; + }; + interfaces { gbe0: interface-0 { slave-port = <0>; diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi index c97ed29a0a0b..217bd374e52b 100644 --- a/arch/arm/boot/dts/kirkwood-synology.dtsi +++ b/arch/arm/boot/dts/kirkwood-synology.dtsi @@ -244,7 +244,7 @@ rs5c372: rs5c372@32 { status = "disabled"; - compatible = "ricoh,rs5c372"; + compatible = "ricoh,rs5c372a"; reg = <0x32>; }; diff --git a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts index f7a841a28865..2a0a98fe67f0 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts @@ -9,5 +9,5 @@ / { model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit"; - compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3"; + compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3430", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts index 7675bc3fa868..57bae2aa910e 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts @@ -9,5 +9,5 @@ / { model = "LogicPD Zoom OMAP35xx Torpedo Development Kit"; - compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3"; + compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3430", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts index 07ac99b9cda6..b5536132971f 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts @@ -11,22 +11,5 @@ #include "logicpd-torpedo-37xx-devkit.dts" &lcd0 { - - label = "28"; - - panel-timing { - clock-frequency = <9000000>; - hactive = <480>; - vactive = <272>; - hfront-porch = <3>; - hback-porch = <2>; - hsync-len = <42>; - vback-porch = <3>; - vfront-porch = <2>; - vsync-len = <11>; - hsync-active = <1>; - vsync-active = <1>; - de-active = <1>; - pixelclk-active = <0>; - }; + compatible = "logicpd,type28"; }; diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts index 18c27e85051f..5532db04046c 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts @@ -50,6 +50,20 @@ }; }; +&uart2 { + /delete-property/dma-names; + bluetooth { + compatible = "ti,wl1283-st"; + enable-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio 162 */ + max-speed = <3000000>; + }; +}; + +/* The DM3730 has a faster L3 than OMAP35, so increase pixel clock */ +&mt9p031_out { + pixel-clock-frequency = <90000000>; +}; + &omap3_pmx_core { mmc3_pins: pinmux_mm3_pins { pinctrl-single,pins = < diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi index 449cc7616da6..f7b82ced4080 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi @@ -101,6 +101,12 @@ }; }; +&hdqw1w { + pinctrl-names = "default"; + pinctrl-0 = <&hdq_pins>; +}; + + &vpll2 { regulator-always-on; }; @@ -108,6 +114,7 @@ &dss { status = "ok"; vdds_dsi-supply = <&vpll2>; + vdda_video-supply = <&vpll2>; pinctrl-names = "default"; pinctrl-0 = <&dss_dpi_pins1>; port { @@ -125,7 +132,6 @@ lcd0: display { /* This isn't the exact LCD, but the timings meet spec */ - /* To make it work, set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 */ compatible = "newhaven,nhd-4.3-480272ef-atxl"; label = "15"; pinctrl-names = "default"; @@ -168,6 +174,12 @@ >; }; + hdq_pins: hdq_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* hdq_sio */ + >; + }; + pwm_pins: pinmux_pwm_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* gpmc_ncs5.gpt_10_pwm_evt */ diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 506b118e511a..3a5228562b0d 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -35,6 +35,11 @@ }; }; +/* The Torpedo doesn't route the USB host pins */ +&usbhshost { + status = "disabled"; +}; + &gpmc { ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ diff --git a/arch/arm/boot/dts/mmp3-dell-ariel.dts b/arch/arm/boot/dts/mmp3-dell-ariel.dts new file mode 100644 index 000000000000..c1947b5a688d --- /dev/null +++ b/arch/arm/boot/dts/mmp3-dell-ariel.dts @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Dell Wyse 3020 a.k.a. "Ariel" a.k.a. Tx0D (T00D, T10D) + * + * Copyright (C) 2019 Lubomir Rintel <lkundrak@v3.sk> + */ + +/dts-v1/; +#include "mmp3.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Dell Ariel"; + compatible = "dell,wyse-ariel", "marvell,mmp3"; + + aliases { + serial2 = &uart3; + }; + + chosen { + #address-cells = <0x1>; + #size-cells = <0x1>; + ranges; + bootargs = "earlyprintk=ttyS2,115200 console=ttyS2,115200"; + }; + + memory@0 { + linux,usable-memory = <0x0 0x7f600000>; + available = <0x7f700000 0x7ff00000 0x00000000 0x7f600000>; + reg = <0x0 0x80000000>; + device_type = "memory"; + }; +}; + +&uart3 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&usb_otg0 { + status = "okay"; +}; + +&usb_otg_phy0 { + status = "okay"; +}; + +&mmc3 { + status = "okay"; + max-frequency = <50000000>; + status = "okay"; + bus-width = <8>; + non-removable; + cap-mmc-highspeed; +}; + +&twsi1 { + status = "okay"; + + rtc@68 { + compatible = "dallas,ds1338"; + reg = <0x68>; + status = "okay"; + }; +}; + +&twsi3 { + status = "okay"; +}; + +&twsi4 { + status = "okay"; +}; + +&ssp3 { + status = "okay"; + cs-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; + + firmware-flash@0 { + compatible = "st,m25p80", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + m25p,fast-read; + }; +}; + +&ssp4 { + cs-gpios = <&gpio 56 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi new file mode 100644 index 000000000000..d9762de0ed34 --- /dev/null +++ b/arch/arm/boot/dts/mmp3.dtsi @@ -0,0 +1,527 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2019 Lubomir Rintel <lkundrak@v3.sk> + */ + +#include <dt-bindings/clock/marvell,mmp2.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "marvell,mmp3-smp"; + + cpu@0 { + compatible = "marvell,pj4b"; + device_type = "cpu"; + next-level-cache = <&l2>; + reg = <0>; + }; + + cpu@1 { + compatible = "marvell,pj4b"; + device_type = "cpu"; + next-level-cache = <&l2>; + reg = <1>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + axi@d4200000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xd4200000 0x00200000>; + ranges; + + interrupt-controller@d4282000 { + compatible = "marvell,mmp3-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xd4282000 0x1000>, + <0xd4284000 0x100>; + mrvl,intc-nr-irqs = <64>; + }; + + pmic_mux: interrupt-controller@d4282150 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x150 0x4>, <0x168 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <4>; + }; + + rtc_mux: interrupt-controller@d4282154 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x154 0x4>, <0x16c 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <2>; + }; + + hsi3_mux: interrupt-controller@d42821bc { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1bc 0x4>, <0x1a4 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <3>; + }; + + gpu_mux: interrupt-controller@d42821c0 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1c0 0x4>, <0x1a8 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <3>; + }; + + twsi_mux: interrupt-controller@d4282158 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x158 0x4>, <0x170 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <5>; + }; + + hsi2_mux: interrupt-controller@d42821c4 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1c4 0x4>, <0x1ac 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <2>; + }; + + dxo_mux: interrupt-controller@d42821c8 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1c8 0x4>, <0x1b0 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <2>; + }; + + misc1_mux: interrupt-controller@d428215c { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x15c 0x4>, <0x174 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <31>; + }; + + ci_mux: interrupt-controller@d42821cc { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1cc 0x4>, <0x1b4 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <2>; + }; + + ssp_mux: interrupt-controller@d4282160 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x160 0x4>, <0x178 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <2>; + }; + + hsi1_mux: interrupt-controller@d4282184 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x184 0x4>, <0x17c 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <4>; + }; + + misc2_mux: interrupt-controller@d4282188 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x188 0x4>, <0x180 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <20>; + }; + + hsi0_mux: interrupt-controller@d42821d0 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1d0 0x4>, <0x1b8 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <5>; + }; + + usb_otg_phy0: usb-otg-phy@d4207000 { + compatible = "marvell,mmp3-usb-phy"; + reg = <0xd4207000 0x40>; + #phy-cells = <0>; + status = "disabled"; + }; + + usb_otg0: usb-otg@d4208000 { + compatible = "marvell,pxau2o-ehci"; + reg = <0xd4208000 0x200>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_USB>; + clock-names = "USBCLK"; + phys = <&usb_otg_phy0>; + phy-names = "usb"; + status = "disabled"; + }; + + mmc1: mmc@d4280000 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xd4280000 0x120>; + clocks = <&soc_clocks MMP2_CLK_SDH0>; + clock-names = "io"; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + mmc2: mmc@d4280800 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xd4280800 0x120>; + clocks = <&soc_clocks MMP2_CLK_SDH1>; + clock-names = "io"; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + mmc3: mmc@d4281000 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xd4281000 0x120>; + clocks = <&soc_clocks MMP2_CLK_SDH2>; + clock-names = "io"; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + mmc4: mmc@d4281800 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xd4281800 0x120>; + clocks = <&soc_clocks MMP2_CLK_SDH3>; + clock-names = "io"; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + camera0: camera@d420a000 { + compatible = "marvell,mmp2-ccic"; + reg = <0xd420a000 0x800>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_CCIC0>; + clock-names = "axi"; + #clock-cells = <0>; + clock-output-names = "mclk"; + status = "disabled"; + }; + + camera1: camera@d420a800 { + compatible = "marvell,mmp2-ccic"; + reg = <0xd420a800 0x800>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_CCIC1>; + clock-names = "axi"; + #clock-cells = <0>; + clock-output-names = "mclk"; + status = "disabled"; + }; + }; + + apb@d4000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xd4000000 0x00200000>; + ranges; + + timer: timer@d4014000 { + compatible = "mrvl,mmp-timer"; + reg = <0xd4014000 0x100>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_TIMER>; + }; + + uart1: uart@d4030000 { + compatible = "mrvl,mmp-uart"; + reg = <0xd4030000 0x1000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_UART0>; + resets = <&soc_clocks MMP2_CLK_UART0>; + reg-shift = <2>; + status = "disabled"; + }; + + uart2: uart@d4017000 { + compatible = "mrvl,mmp-uart"; + reg = <0xd4017000 0x1000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_UART1>; + resets = <&soc_clocks MMP2_CLK_UART1>; + reg-shift = <2>; + status = "disabled"; + }; + + uart3: uart@d4018000 { + compatible = "mrvl,mmp-uart"; + reg = <0xd4018000 0x1000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_UART2>; + resets = <&soc_clocks MMP2_CLK_UART2>; + reg-shift = <2>; + status = "disabled"; + }; + + uart4: uart@d4016000 { + compatible = "mrvl,mmp-uart"; + reg = <0xd4016000 0x1000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_UART3>; + resets = <&soc_clocks MMP2_CLK_UART3>; + reg-shift = <2>; + status = "disabled"; + }; + + gpio: gpio@d4019000 { + compatible = "marvell,mmp2-gpio"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xd4019000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gpio_mux"; + clocks = <&soc_clocks MMP2_CLK_GPIO>; + resets = <&soc_clocks MMP2_CLK_GPIO>; + interrupt-controller; + #interrupt-cells = <2>; + ranges; + + gcb0: gpio@d4019000 { + reg = <0xd4019000 0x4>; + }; + + gcb1: gpio@d4019004 { + reg = <0xd4019004 0x4>; + }; + + gcb2: gpio@d4019008 { + reg = <0xd4019008 0x4>; + }; + + gcb3: gpio@d4019100 { + reg = <0xd4019100 0x4>; + }; + + gcb4: gpio@d4019104 { + reg = <0xd4019104 0x4>; + }; + + gcb5: gpio@d4019108 { + reg = <0xd4019108 0x4>; + }; + }; + + twsi1: i2c@d4011000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4011000 0x1000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_TWSI0>; + resets = <&soc_clocks MMP2_CLK_TWSI0>; + #address-cells = <1>; + #size-cells = <0>; + mrvl,i2c-fast-mode; + status = "disabled"; + }; + + twsi2: i2c@d4031000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4031000 0x1000>; + interrupt-parent = <&twsi_mux>; + interrupts = <0>; + clocks = <&soc_clocks MMP2_CLK_TWSI1>; + resets = <&soc_clocks MMP2_CLK_TWSI1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + twsi3: i2c@d4032000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4032000 0x1000>; + interrupt-parent = <&twsi_mux>; + interrupts = <1>; + clocks = <&soc_clocks MMP2_CLK_TWSI2>; + resets = <&soc_clocks MMP2_CLK_TWSI2>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + twsi4: i2c@d4033000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4033000 0x1000>; + interrupt-parent = <&twsi_mux>; + interrupts = <2>; + clocks = <&soc_clocks MMP2_CLK_TWSI3>; + resets = <&soc_clocks MMP2_CLK_TWSI3>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + + twsi5: i2c@d4033800 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4033800 0x1000>; + interrupt-parent = <&twsi_mux>; + interrupts = <3>; + clocks = <&soc_clocks MMP2_CLK_TWSI4>; + resets = <&soc_clocks MMP2_CLK_TWSI4>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + twsi6: i2c@d4034000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4034000 0x1000>; + interrupt-parent = <&twsi_mux>; + interrupts = <4>; + clocks = <&soc_clocks MMP2_CLK_TWSI5>; + resets = <&soc_clocks MMP2_CLK_TWSI5>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + rtc: rtc@d4010000 { + compatible = "mrvl,mmp-rtc"; + reg = <0xd4010000 0x1000>; + interrupts = <1 0>; + interrupt-names = "rtc 1Hz", "rtc alarm"; + interrupt-parent = <&rtc_mux>; + clocks = <&soc_clocks MMP2_CLK_RTC>; + resets = <&soc_clocks MMP2_CLK_RTC>; + status = "disabled"; + }; + + ssp1: spi@d4035000 { + compatible = "marvell,mmp2-ssp"; + reg = <0xd4035000 0x1000>; + clocks = <&soc_clocks MMP2_CLK_SSP0>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ssp2: spi@d4036000 { + compatible = "marvell,mmp2-ssp"; + reg = <0xd4036000 0x1000>; + clocks = <&soc_clocks MMP2_CLK_SSP1>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ssp3: spi@d4037000 { + compatible = "marvell,mmp2-ssp"; + reg = <0xd4037000 0x1000>; + clocks = <&soc_clocks MMP2_CLK_SSP2>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ssp4: spi@d4039000 { + compatible = "marvell,mmp2-ssp"; + reg = <0xd4039000 0x1000>; + clocks = <&soc_clocks MMP2_CLK_SSP3>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + l2: l2-cache-controller@d0020000 { + compatible = "marvell,tauros3-cache", "arm,pl310-cache"; + reg = <0xd0020000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + soc_clocks: clocks@d4050000 { + compatible = "marvell,mmp2-clock"; + reg = <0xd4050000 0x1000>, + <0xd4282800 0x400>, + <0xd4015000 0x1000>; + reg-names = "mpmu", "apmu", "apbc"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + snoop-control-unit@e0000000 { + compatible = "arm,arm11mp-scu"; + reg = <0xe0000000 0x100>; + }; + + gic: interrupt-controller@e0001000 { + compatible = "arm,arm11mp-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0xe0001000 0x1000>, + <0xe0000100 0x100>; + }; + + local-timer@e0000600 { + compatible = "arm,arm11mp-twd-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>; + reg = <0xe0000600 0x20>; + }; + + watchdog@e0000620 { + compatible = "arm,arm11mp-twd-wdt"; + reg = <0xe0000620 0x20>; + interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>; + }; + }; +}; diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi index d1eae47b83f6..936ad010c83a 100644 --- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi +++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi @@ -43,11 +43,13 @@ compatible = "motorola,mapphone-cpcap-charger"; interrupts-extended = < &cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0 - &cpcap 22 0 &cpcap 20 0 &cpcap 19 0 &cpcap 54 0 + &cpcap 22 0 &cpcap 21 0 &cpcap 20 0 &cpcap 19 0 + &cpcap 54 0 >; interrupt-names = "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn", - "rvrs_mode", "chrgcurr1", "vbusvld", "battdetb"; + "rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld", + "battdetb"; mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW &gpio3 23 GPIO_ACTIVE_LOW>; io-channels = <&cpcap_adc 0 &cpcap_adc 1 @@ -160,12 +162,12 @@ regulator-enable-ramp-delay = <1000>; }; - /* Used by DSS */ + /* Used by DSS and is the "zerov_regulator" trigger for SoC off mode */ vcsi: VCSI { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-enable-ramp-delay = <1000>; - regulator-boot-on; + regulator-always-on; }; vdac: VDAC { diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi new file mode 100644 index 000000000000..da6b107da84a --- /dev/null +++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi @@ -0,0 +1,786 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "omap443x.dtsi" +#include "motorola-cpcap-mapphone.dtsi" + +/ { + chosen { + stdout-path = &uart3; + }; + + aliases { + display0 = &lcd0; + display1 = &hdmi0; + }; + + /* + * We seem to have only 1021 MB accessible, 1021 - 1022 is locked, + * then 1023 - 1024 seems to contain mbm. + */ + memory { + device_type = "memory"; + reg = <0x80000000 0x3fd00000>; /* 1021 MB */ + }; + + /* Poweroff GPIO probably connected to CPCAP */ + gpio-poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&poweroff_gpio>; + pinctrl-names = "default"; + gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; /* gpio50 */ + }; + + hdmi0: connector { + compatible = "hdmi-connector"; + pinctrl-0 = <&hdmi_hpd_gpio>; + pinctrl-names = "default"; + label = "hdmi"; + type = "d"; + + hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio63 */ + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + }; + + /* + * HDMI 5V regulator probably sourced from battery. Let's keep + * keep this as always enabled for HDMI to work until we've + * figured what the encoder chip is. + */ + hdmi_regulator: regulator-hdmi { + compatible = "regulator-fixed"; + regulator-name = "hdmi"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio59 */ + enable-active-high; + regulator-always-on; + }; + + /* FS USB Host PHY on port 1 for mdm6600 */ + fsusb1_phy: usb-phy@1 { + compatible = "motorola,mapphone-mdm6600"; + pinctrl-0 = <&usb_mdm6600_pins>; + pinctrl-names = "default"; + enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; /* gpio_95 */ + power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* gpio_54 */ + reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; /* gpio_49 */ + /* mode: gpio_148 gpio_149 */ + motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>, + <&gpio5 21 GPIO_ACTIVE_HIGH>; + /* cmd: gpio_103 gpio_104 gpio_142 */ + motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>, + <&gpio4 8 GPIO_ACTIVE_HIGH>, + <&gpio5 14 GPIO_ACTIVE_HIGH>; + /* status: gpio_52 gpio_53 gpio_55 */ + motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>, + <&gpio2 21 GPIO_ACTIVE_HIGH>, + <&gpio2 23 GPIO_ACTIVE_HIGH>; + #phy-cells = <0>; + }; + + /* HS USB host TLL nop-phy on port 2 for w3glte */ + hsusb2_phy: usb-phy@2 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; + + /* LCD regulator from sw5 source */ + lcd_regulator: regulator-lcd { + compatible = "regulator-fixed"; + regulator-name = "lcd"; + regulator-min-microvolt = <5050000>; + regulator-max-microvolt = <5050000>; + gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* gpio96 */ + enable-active-high; + vin-supply = <&sw5>; + }; + + /* This is probably coming straight from the battery.. */ + wl12xx_vmmc: regulator-wl12xx { + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1650000>; + gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; /* gpio94 */ + startup-delay-us = <70000>; + enable-active-high; + }; + + gpio_keys { + compatible = "gpio-keys"; + + volume_down { + label = "Volume Down"; + gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; /* gpio154 */ + linux,code = <KEY_VOLUMEDOWN>; + linux,can-disable; + /* Value above 7.95ms for no GPIO hardware debounce */ + debounce-interval = <10>; + }; + + slider { + label = "Keypad Slide"; + gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */ + linux,input-type = <EV_SW>; + linux,code = <SW_KEYPAD_SLIDE>; + linux,can-disable; + /* Value above 7.95ms for no GPIO hardware debounce */ + debounce-interval = <10>; + }; + }; + + soundcard { + compatible = "audio-graph-card"; + label = "Droid 4 Audio"; + + simple-graph-card,widgets = + "Speaker", "Earpiece", + "Speaker", "Loudspeaker", + "Headphone", "Headphone Jack", + "Microphone", "Internal Mic"; + + simple-graph-card,routing = + "Earpiece", "EP", + "Loudspeaker", "SPKR", + "Headphone Jack", "HSL", + "Headphone Jack", "HSR", + "MICR", "Internal Mic"; + + dais = <&mcbsp2_port>, <&mcbsp3_port>; + }; + + pwm8: dmtimer-pwm-8 { + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_direction_pin>; + + compatible = "ti,omap-dmtimer-pwm"; + #pwm-cells = <3>; + ti,timers = <&timer8>; + ti,clock-source = <0x01>; + }; + + pwm9: dmtimer-pwm-9 { + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_enable_pin>; + + compatible = "ti,omap-dmtimer-pwm"; + #pwm-cells = <3>; + ti,timers = <&timer9>; + ti,clock-source = <0x01>; + }; + + vibrator { + compatible = "pwm-vibrator"; + pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>; + pwm-names = "enable", "direction"; + direction-duty-cycle-ns = <10000000>; + }; +}; + +&dss { + status = "okay"; +}; + +&dsi1 { + status = "okay"; + vdd-supply = <&vcsi>; + + port { + dsi1_out_ep: endpoint { + remote-endpoint = <&lcd0_in>; + lanes = <0 1 2 3 4 5>; + }; + }; + + lcd0: display { + compatible = "panel-dsi-cm"; + label = "lcd0"; + vddi-supply = <&lcd_regulator>; + reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */ + + width-mm = <50>; + height-mm = <89>; + + panel-timing { + clock-frequency = <0>; /* Calculated by dsi */ + + hback-porch = <2>; + hactive = <540>; + hfront-porch = <0>; + hsync-len = <2>; + + vback-porch = <1>; + vactive = <960>; + vfront-porch = <0>; + vsync-len = <1>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + lcd0_in: endpoint { + remote-endpoint = <&dsi1_out_ep>; + }; + }; + }; +}; + +&hdmi { + status = "okay"; + pinctrl-0 = <&dss_hdmi_pins>; + pinctrl-names = "default"; + vdda-supply = <&vdac>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + lanes = <1 0 3 2 5 4 7 6>; + }; + }; +}; + +&i2c1 { + tmp105@48 { + compatible = "ti,tmp105"; + reg = <0x48>; + pinctrl-0 = <&tmp105_irq>; + pinctrl-names = "default"; + /* kpd_row0.gpio_178 */ + interrupts-extended = <&gpio6 18 IRQ_TYPE_EDGE_FALLING + &omap4_pmx_core 0x14e>; + interrupt-names = "irq", "wakeup"; + wakeup-source; + }; +}; + +&keypad { + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = < + + /* Row 1 */ + MATRIX_KEY(0, 2, KEY_1) + MATRIX_KEY(0, 6, KEY_2) + MATRIX_KEY(2, 3, KEY_3) + MATRIX_KEY(0, 7, KEY_4) + MATRIX_KEY(0, 4, KEY_5) + MATRIX_KEY(5, 5, KEY_6) + MATRIX_KEY(0, 1, KEY_7) + MATRIX_KEY(0, 5, KEY_8) + MATRIX_KEY(0, 0, KEY_9) + MATRIX_KEY(1, 6, KEY_0) + + /* Row 2 */ + MATRIX_KEY(3, 4, KEY_APOSTROPHE) + MATRIX_KEY(7, 6, KEY_Q) + MATRIX_KEY(7, 7, KEY_W) + MATRIX_KEY(7, 2, KEY_E) + MATRIX_KEY(1, 0, KEY_R) + MATRIX_KEY(4, 4, KEY_T) + MATRIX_KEY(1, 2, KEY_Y) + MATRIX_KEY(6, 7, KEY_U) + MATRIX_KEY(2, 2, KEY_I) + MATRIX_KEY(5, 6, KEY_O) + MATRIX_KEY(3, 7, KEY_P) + MATRIX_KEY(6, 5, KEY_BACKSPACE) + + /* Row 3 */ + MATRIX_KEY(5, 4, KEY_TAB) + MATRIX_KEY(5, 7, KEY_A) + MATRIX_KEY(2, 7, KEY_S) + MATRIX_KEY(7, 0, KEY_D) + MATRIX_KEY(2, 6, KEY_F) + MATRIX_KEY(6, 2, KEY_G) + MATRIX_KEY(6, 6, KEY_H) + MATRIX_KEY(1, 4, KEY_J) + MATRIX_KEY(3, 1, KEY_K) + MATRIX_KEY(2, 1, KEY_L) + MATRIX_KEY(4, 6, KEY_ENTER) + + /* Row 4 */ + MATRIX_KEY(3, 6, KEY_LEFTSHIFT) /* KEY_CAPSLOCK */ + MATRIX_KEY(6, 1, KEY_Z) + MATRIX_KEY(7, 4, KEY_X) + MATRIX_KEY(5, 1, KEY_C) + MATRIX_KEY(1, 7, KEY_V) + MATRIX_KEY(2, 4, KEY_B) + MATRIX_KEY(4, 1, KEY_N) + MATRIX_KEY(1, 1, KEY_M) + MATRIX_KEY(3, 5, KEY_COMMA) + MATRIX_KEY(5, 2, KEY_DOT) + MATRIX_KEY(6, 3, KEY_UP) + MATRIX_KEY(7, 3, KEY_OK) + + /* Row 5 */ + MATRIX_KEY(2, 5, KEY_LEFTCTRL) /* KEY_LEFTSHIFT */ + MATRIX_KEY(4, 5, KEY_LEFTALT) /* SYM */ + MATRIX_KEY(6, 0, KEY_MINUS) + MATRIX_KEY(4, 7, KEY_EQUAL) + MATRIX_KEY(1, 5, KEY_SPACE) + MATRIX_KEY(3, 2, KEY_SLASH) + MATRIX_KEY(4, 3, KEY_LEFT) + MATRIX_KEY(5, 3, KEY_DOWN) + MATRIX_KEY(3, 3, KEY_RIGHT) + + /* Side buttons, KEY_VOLUMEDOWN and KEY_PWER are on CPCAP? */ + MATRIX_KEY(5, 0, KEY_VOLUMEUP) + >; +}; + +&mmc1 { + vmmc-supply = <&vwlan2>; + bus-width = <4>; + cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* gpio176 */ +}; + +&mmc2 { + vmmc-supply = <&vsdio>; + bus-width = <8>; + ti,non-removable; +}; + +&mmc3 { + vmmc-supply = <&wl12xx_vmmc>; + /* uart2_tx.sdmmc3_dat1 pad as wakeirq */ + interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core 0xde>; + interrupt-names = "irq", "wakeup"; + non-removable; + bus-width = <4>; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1285", "ti,wl1283"; + reg = <2>; + /* gpio_100 with gpmc_wait2 pad as wakeirq */ + interrupts-extended = <&gpio4 4 IRQ_TYPE_LEVEL_HIGH>, + <&omap4_pmx_core 0x4e>; + interrupt-names = "irq", "wakeup"; + ref-clock-frequency = <26000000>; + tcxo-clock-frequency = <26000000>; + }; +}; + +&i2c1 { + led-controller@38 { + compatible = "ti,lm3532"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x38>; + + enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; + + ramp-up-us = <1024>; + ramp-down-us = <8193>; + + led@0 { + reg = <0>; + led-sources = <2>; + ti,led-mode = <0>; + label = ":backlight"; + linux,default-trigger = "backlight"; + }; + + led@1 { + reg = <1>; + led-sources = <1>; + ti,led-mode = <0>; + label = ":kbd_backlight"; + }; + }; +}; + +&i2c2 { + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + + reset-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio173 */ + + /* gpio_183 with sys_nirq2 pad as wakeup */ + interrupts-extended = <&gpio6 23 IRQ_TYPE_EDGE_FALLING>, + <&omap4_pmx_core 0x160>; + interrupt-names = "irq", "wakeup"; + wakeup-source; + }; + + isl29030@44 { + compatible = "isil,isl29030"; + reg = <0x44>; + + pinctrl-names = "default"; + pinctrl-0 = <&als_proximity_pins>; + + interrupt-parent = <&gpio6>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */ + }; +}; + +&omap4_pmx_core { + + /* hdmi_hpd.gpio_63 */ + hdmi_hpd_gpio: pinmux_hdmi_hpd_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3) + >; + }; + + /* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */ + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) + OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) + OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) + >; + }; + + /* gpmc_ncs0.gpio_50 */ + poweroff_gpio: pinmux_poweroff_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x074, PIN_OUTPUT_PULLUP | MUX_MODE3) + >; + }; + + /* kpd_row0.gpio_178 */ + tmp105_irq: pinmux_tmp105_irq { + pinctrl-single,pins = < + OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; + + usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins { + /* gpio_60 */ + pinctrl-single,pins = < + OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) + >; + }; + + touchscreen_pins: pinmux_touchscreen_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3) + OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; + + als_proximity_pins: pinmux_als_proximity_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; + + usb_mdm6600_pins: pinmux_usb_mdm6600_pins { + pinctrl-single,pins = < + /* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */ + OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3) + + /* power 0x4a10007c gpmc_nwp.gpio_54 c25 */ + OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) + + /* reset 0x4a100072 gpmc_a25.gpio_49 d20 */ + OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3) + + /* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */ + OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3) + + /* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */ + OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3) + + /* status0 0x4a10007e gpmc_clk.gpio_55 b22 */ + OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3) + + /* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */ + OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) + + /* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */ + OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) + + /* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */ + OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3) + + /* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */ + OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3) + + /* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */ + OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3) + >; + }; + + usb_ulpi_pins: pinmux_usb_ulpi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x196, MUX_MODE7) + OMAP4_IOPAD(0x198, MUX_MODE7) + OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE0) + >; + }; + + /* usb0_otg_dp and usb0_otg_dm */ + usb_utmi_pins: pinmux_usb_utmi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0) + OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0) + OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7) + >; + }; + + /* + * Note that the v3.0.8 stock userspace dynamically remuxes uart1 + * rts pin probably for PM purposes to PIN_INPUT_PULLUP | MUX_MODE7 + * when not used. If needed, we can add rts pin remux later based + * on power measurements. + */ + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + /* 0x4a10013c mcspi1_cs2.uart1_cts ag23 */ + OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1) + + /* 0x4a10013e mcspi1_cs3.uart1_rts ah23 */ + OMAP4_IOPAD(0x13e, MUX_MODE1) + + /* 0x4a100140 uart3_cts_rctx.uart1_tx f27 */ + OMAP4_IOPAD(0x140, PIN_OUTPUT | MUX_MODE1) + + /* 0x4a1001ca dpm_emu14.uart1_rx aa3 */ + OMAP4_IOPAD(0x1ca, PIN_INPUT_PULLUP | MUX_MODE2) + >; + }; + + /* uart3_tx_irtx and uart3_rx_irrx */ + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x196, MUX_MODE7) + OMAP4_IOPAD(0x198, MUX_MODE7) + OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1ba, MUX_MODE2) + OMAP4_IOPAD(0x1bc, PIN_INPUT | MUX_MODE2) + OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7) + >; + }; + + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0) /* uart4_rx */ + OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0) /* uart4_tx */ + OMAP4_IOPAD(0x110, PIN_INPUT_PULLUP | MUX_MODE5) /* uart4_cts */ + OMAP4_IOPAD(0x112, PIN_OUTPUT_PULLUP | MUX_MODE5) /* uart4_rts */ + >; + }; + + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx */ + OMAP4_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_dr */ + OMAP4_IOPAD(0x0fa, PIN_OUTPUT | MUX_MODE0) /* abe_mcbsp2_dx */ + OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx */ + >; + }; + + mcbsp3_pins: pinmux_mcbsp3_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x106, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_dr */ + OMAP4_IOPAD(0x108, PIN_OUTPUT | MUX_MODE1) /* abe_mcbsp3_dx */ + OMAP4_IOPAD(0x10a, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_clkx */ + OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_fsx */ + >; + }; + + vibrator_direction_pin: pinmux_vibrator_direction_pin { + pinctrl-single,pins = < + OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */ + >; + }; + + vibrator_enable_pin: pinmux_vibrator_enable_pin { + pinctrl-single,pins = < + OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */ + >; + }; +}; + +&omap4_pmx_wkup { + usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins { + /* gpio_wk0 */ + pinctrl-single,pins = < + OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3) + >; + }; +}; + +/* Configure pwm clock source for timers 8 & 9 */ +&timer8 { + assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>; + assigned-clock-parents = <&sys_clkin_ck>; +}; + +&timer9 { + assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>; + assigned-clock-parents = <&sys_clkin_ck>; +}; + +/* + * As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for + * uart1 wakeirq. + */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core 0xfc>; +}; + +&uart3 { + interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core 0x17c>; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + + bluetooth { + compatible = "ti,wl1285-st"; + enable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; /* gpio 174 */ + max-speed = <3686400>; + }; +}; + +&usbhsohci { + phys = <&fsusb1_phy>; + phy-names = "usb"; +}; + +&usbhsehci { + phys = <&hsusb2_phy>; +}; + +&usbhshost { + port1-mode = "ohci-phy-4pin-dpdm"; + port2-mode = "ehci-tll"; +}; + +/* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */ +&usb_otg_hs { + interface-type = <1>; + mode = <3>; + + /* + * Max 300 mA steps based on similar PMIC MC13783UG.pdf "Table 10-4. + * VBUS Regulator Main Characteristics". Binding uses 2 mA units. + */ + power = <150>; +}; + +&i2c4 { + ak8975: magnetometer@c { + compatible = "asahi-kasei,ak8975"; + reg = <0x0c>; + + vdd-supply = <&vhvio>; + + interrupt-parent = <&gpio6>; + interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */ + + rotation-matrix = "-1", "0", "0", + "0", "1", "0", + "0", "0", "-1"; + + }; + + lis3dh: accelerometer@18 { + compatible = "st,lis3dh-accel"; + reg = <0x18>; + + vdd-supply = <&vhvio>; + + interrupt-parent = <&gpio2>; + interrupts = <2 IRQ_TYPE_EDGE_BOTH>; /* gpio34 */ + + rotation-matrix = "0", "-1", "0", + "1", "0", "0", + "0", "0", "1"; + }; +}; + +&mcbsp2 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; + status = "okay"; + + mcbsp2_port: port { + cpu_dai2: endpoint { + dai-format = "i2s"; + remote-endpoint = <&cpcap_audio_codec0>; + frame-master = <&cpcap_audio_codec0>; + bitclock-master = <&cpcap_audio_codec0>; + }; + }; +}; + +&mcbsp3 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp3_pins>; + status = "okay"; + + mcbsp3_port: port { + cpu_dai3: endpoint { + dai-format = "dsp_a"; + frame-master = <&cpcap_audio_codec1>; + bitclock-master = <&cpcap_audio_codec1>; + remote-endpoint = <&cpcap_audio_codec1>; + }; + }; +}; + +&cpcap_audio_codec0 { + remote-endpoint = <&cpu_dai2>; +}; + +&cpcap_audio_codec1 { + remote-endpoint = <&cpu_dai3>; +}; diff --git a/arch/arm/boot/dts/mt6323.dtsi b/arch/arm/boot/dts/mt6323.dtsi index ba397407c1dd..7fda40ab5fe8 100644 --- a/arch/arm/boot/dts/mt6323.dtsi +++ b/arch/arm/boot/dts/mt6323.dtsi @@ -238,5 +238,32 @@ regulator-enable-ramp-delay = <216>; }; }; + + mt6323keys: mt6323keys { + compatible = "mediatek,mt6323-keys"; + mediatek,long-press-mode = <1>; + power-off-time-sec = <0>; + + power { + linux,keycodes = <116>; + wakeup-source; + }; + + home { + linux,keycodes = <114>; + }; + }; + + codec: mt6397codec { + compatible = "mediatek,mt6397-codec"; + }; + + power-controller { + compatible = "mediatek,mt6323-pwrc"; + }; + + rtc { + compatible = "mediatek,mt6323-rtc"; + }; }; }; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 1aa99fc1487a..125ed933ca75 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3 BeagleBoard xM"; - compatible = "ti,omap3-beagle-xm", "ti,omap36xx", "ti,omap3"; + compatible = "ti,omap3-beagle-xm", "ti,omap3630", "ti,omap36xx", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index e3df3c166902..4ed3f93f5841 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3 BeagleBoard"; - compatible = "ti,omap3-beagle", "ti,omap3"; + compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-cm-t3530.dts b/arch/arm/boot/dts/omap3-cm-t3530.dts index 76e52c78cbb4..32dbaeaed147 100644 --- a/arch/arm/boot/dts/omap3-cm-t3530.dts +++ b/arch/arm/boot/dts/omap3-cm-t3530.dts @@ -9,7 +9,7 @@ / { model = "CompuLab CM-T3530"; - compatible = "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3"; + compatible = "compulab,omap3-cm-t3530", "ti,omap3430", "ti,omap34xx", "ti,omap3"; /* Regulator to trigger the reset signal of the Wifi module */ mmc2_sdio_reset: regulator-mmc2-sdio-reset { diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts index 6e944dfa0f3d..683819bf0915 100644 --- a/arch/arm/boot/dts/omap3-cm-t3730.dts +++ b/arch/arm/boot/dts/omap3-cm-t3730.dts @@ -9,7 +9,7 @@ / { model = "CompuLab CM-T3730"; - compatible = "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3"; + compatible = "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap36xx", "ti,omap3"; wl12xx_vmmc2: wl12xx_vmmc2 { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts b/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts index a80fc60bc773..afed85078ad8 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts @@ -11,7 +11,7 @@ #include "omap3-devkit8000-lcd-common.dtsi" / { model = "TimLL OMAP3 Devkit8000 with 4.3'' LCD panel"; - compatible = "timll,omap3-devkit8000", "ti,omap3"; + compatible = "timll,omap3-devkit8000", "ti,omap3430", "ti,omap3"; lcd0: display { panel-timing { diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts b/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts index 0753776071f8..07c51a105c0d 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts @@ -11,7 +11,7 @@ #include "omap3-devkit8000-lcd-common.dtsi" / { model = "TimLL OMAP3 Devkit8000 with 7.0'' LCD panel"; - compatible = "timll,omap3-devkit8000", "ti,omap3"; + compatible = "timll,omap3-devkit8000", "ti,omap3430", "ti,omap3"; lcd0: display { panel-timing { diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts index faafc48d8f61..162d0726b008 100644 --- a/arch/arm/boot/dts/omap3-devkit8000.dts +++ b/arch/arm/boot/dts/omap3-devkit8000.dts @@ -7,7 +7,7 @@ #include "omap3-devkit8000-common.dtsi" / { model = "TimLL OMAP3 Devkit8000"; - compatible = "timll,omap3-devkit8000", "ti,omap3"; + compatible = "timll,omap3-devkit8000", "ti,omap3430", "ti,omap3"; aliases { display1 = &dvi0; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index b6ef1a7ac8a4..409a758c99f1 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -11,7 +11,7 @@ / { model = "OMAP3 GTA04"; - compatible = "ti,omap3-gta04", "ti,omap36xx", "ti,omap3"; + compatible = "ti,omap3-gta04", "ti,omap3630", "ti,omap36xx", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-ha-lcd.dts b/arch/arm/boot/dts/omap3-ha-lcd.dts index badb9b3c8897..c9ecbc45c8e2 100644 --- a/arch/arm/boot/dts/omap3-ha-lcd.dts +++ b/arch/arm/boot/dts/omap3-ha-lcd.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3 HEAD acoustics LCD-baseboard with TAO3530 SOM"; - compatible = "headacoustics,omap3-ha-lcd", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3"; + compatible = "headacoustics,omap3-ha-lcd", "technexion,omap3-tao3530", "ti,omap3430", "ti,omap34xx", "ti,omap3"; }; &omap3_pmx_core { diff --git a/arch/arm/boot/dts/omap3-ha.dts b/arch/arm/boot/dts/omap3-ha.dts index a5365252bfbe..35c4e15abeb7 100644 --- a/arch/arm/boot/dts/omap3-ha.dts +++ b/arch/arm/boot/dts/omap3-ha.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3 HEAD acoustics baseboard with TAO3530 SOM"; - compatible = "headacoustics,omap3-ha", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3"; + compatible = "headacoustics,omap3-ha", "technexion,omap3-tao3530", "ti,omap3430", "ti,omap34xx", "ti,omap3"; }; &omap3_pmx_core { diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts index 03dcd05fb8a0..567232584f08 100644 --- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts +++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts @@ -10,7 +10,7 @@ / { model = "IGEPv2 Rev. F (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0020-rev-f", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0020-rev-f", "ti,omap3630", "ti,omap36xx", "ti,omap3"; /* Regulator to trigger the WL_EN signal of the Wifi module */ lbep5clwmc_wlen: regulator-lbep5clwmc-wlen { @@ -49,3 +49,11 @@ interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* gpio 177 */ }; }; + +&uart2 { + bluetooth { + compatible = "ti,wl1835-st"; + enable-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* gpio 137 */ + max-speed = <300000>; + }; +}; diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index 6d0519e3dfd0..e341535a7162 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -10,7 +10,7 @@ / { model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0020", "ti,omap3630", "ti,omap36xx", "ti,omap3"; vmmcsdio_fixed: fixedregulator-mmcsdio { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts index 060acd1e803a..df6ba1219830 100644 --- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts +++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts @@ -10,7 +10,7 @@ / { model = "IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0030-rev-g", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0030-rev-g", "ti,omap3630", "ti,omap36xx", "ti,omap3"; /* Regulator to trigger the WL_EN signal of the Wifi module */ lbep5clwmc_wlen: regulator-lbep5clwmc-wlen { @@ -71,3 +71,11 @@ interrupts = <8 IRQ_TYPE_EDGE_RISING>; /* gpio 136 */ }; }; + +&uart2 { + bluetooth { + compatible = "ti,wl1835-st"; + enable-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* gpio 137 */ + max-speed = <300000>; + }; +}; diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 25170bd3c573..32f31035daa2 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -10,7 +10,7 @@ / { model = "IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0030", "ti,omap3630", "ti,omap36xx", "ti,omap3"; vmmcsdio_fixed: fixedregulator-mmcsdio { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index 9a5fde2d9bce..ec9ba04ef43b 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -10,7 +10,7 @@ / { model = "TI OMAP3430 LDP (Zoom1 Labrador)"; - compatible = "ti,omap3-ldp", "ti,omap3"; + compatible = "ti,omap3-ldp", "ti,omap3430", "ti,omap3"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index c22833d4e568..73d477898ec2 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -7,7 +7,7 @@ / { model = "INCOstartec LILLY-A83X module (DM3730)"; - compatible = "incostartec,omap3-lilly-a83x", "ti,omap36xx", "ti,omap3"; + compatible = "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap36xx", "ti,omap3"; chosen { bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0"; diff --git a/arch/arm/boot/dts/omap3-lilly-dbb056.dts b/arch/arm/boot/dts/omap3-lilly-dbb056.dts index fec335400074..ecb4ef738e07 100644 --- a/arch/arm/boot/dts/omap3-lilly-dbb056.dts +++ b/arch/arm/boot/dts/omap3-lilly-dbb056.dts @@ -8,7 +8,7 @@ / { model = "INCOstartec LILLY-DBB056 (DM3730)"; - compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap36xx", "ti,omap3"; + compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &twl { diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts index 74c0ff2350d3..2495a696cec6 100644 --- a/arch/arm/boot/dts/omap3-n9.dts +++ b/arch/arm/boot/dts/omap3-n9.dts @@ -12,7 +12,7 @@ / { model = "Nokia N9"; - compatible = "nokia,omap3-n9", "ti,omap36xx", "ti,omap3"; + compatible = "nokia,omap3-n9", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &i2c2 { diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 63659880eeb3..a638e059135b 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -1019,6 +1019,11 @@ }; }; +/* RNG not directly accessible on n900, see omap3-rom-rng instead */ +&rng_target { + status = "disabled"; +}; + &usb_otg_hs { interface-type = <0>; usb-phy = <&usb2_phy>; diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index 6681d4519e97..a075b63f3087 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -11,13 +11,6 @@ cpus { cpu@0 { cpu0-supply = <&vcc>; - operating-points = < - /* kHz uV */ - 300000 1012500 - 600000 1200000 - 800000 1325000 - 1000000 1375000 - >; }; }; diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts index 9886bf8b90ab..31d47a1fad84 100644 --- a/arch/arm/boot/dts/omap3-n950.dts +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -12,7 +12,7 @@ / { model = "Nokia N950"; - compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3"; + compatible = "nokia,omap3-n950", "ti,omap3630", "ti,omap36xx", "ti,omap3"; keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts index 18338576c41d..7f04dfad8203 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts @@ -14,5 +14,5 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Alto35"; - compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts index f204c8af8281..bc5a04e03336 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Chestnut43"; - compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts index c633f7cee68e..065c31cbf0e2 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Gallop43"; - compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts index fb88ebc9858c..e38c1c51392c 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo35"; - compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts index 76cca00d97b6..e6dc23159c4d 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo43"; - compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-summit.dts b/arch/arm/boot/dts/omap3-overo-storm-summit.dts index cc081a9e4c1e..587c08ce282d 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-summit.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-summit.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Summit"; - compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts index 1de41c0826e0..f57de6010994 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts @@ -14,6 +14,6 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Tobi"; - compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts index 9ed13118ed8e..281af6c113be 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts @@ -14,5 +14,5 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on TobiDuo"; - compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-pandora-1ghz.dts b/arch/arm/boot/dts/omap3-pandora-1ghz.dts index 81b957f33c9f..ea509956d7ac 100644 --- a/arch/arm/boot/dts/omap3-pandora-1ghz.dts +++ b/arch/arm/boot/dts/omap3-pandora-1ghz.dts @@ -16,7 +16,7 @@ / { model = "Pandora Handheld Console 1GHz"; - compatible = "openpandora,omap3-pandora-1ghz", "ti,omap36xx", "ti,omap3"; + compatible = "openpandora,omap3-pandora-1ghz", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index ec5891718ae6..150d5be42d27 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -226,6 +226,17 @@ gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* GPIO_164 */ }; + /* wl1251 wifi+bt module */ + wlan_en: fixed-regulator-wg7210_en { + compatible = "regulator-fixed"; + regulator-name = "vwlan"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <50000>; + enable-active-high; + gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>; + }; + /* wg7210 (wifi+bt module) 32k clock buffer */ wg7210_32k: fixed-regulator-wg7210_32k { compatible = "regulator-fixed"; @@ -522,9 +533,30 @@ /*wp-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;*/ /* GPIO_127 */ }; -/* mmc3 is probed using pdata-quirks to pass wl1251 card data */ &mmc3 { - status = "disabled"; + vmmc-supply = <&wlan_en>; + + bus-width = <4>; + non-removable; + ti,non-removable; + cap-power-off-card; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins>; + + #address-cells = <1>; + #size-cells = <0>; + + wlan: wifi@1 { + compatible = "ti,wl1251"; + + reg = <1>; + + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_21 */ + + ti,wl1251-has-eeprom; + }; }; /* bluetooth*/ diff --git a/arch/arm/boot/dts/omap3-sbc-t3530.dts b/arch/arm/boot/dts/omap3-sbc-t3530.dts index ae96002abb3b..24bf3fd86641 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3530.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3530.dts @@ -8,7 +8,7 @@ / { model = "CompuLab SBC-T3530 with CM-T3530"; - compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3"; + compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap3430", "ti,omap34xx", "ti,omap3"; aliases { display0 = &dvi0; diff --git a/arch/arm/boot/dts/omap3-sbc-t3730.dts b/arch/arm/boot/dts/omap3-sbc-t3730.dts index 7de6df16fc17..eb3893b9535e 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3730.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3730.dts @@ -8,7 +8,7 @@ / { model = "CompuLab SBC-T3730 with CM-T3730"; - compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3"; + compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap36xx", "ti,omap3"; aliases { display0 = &dvi0; diff --git a/arch/arm/boot/dts/omap3-sniper.dts b/arch/arm/boot/dts/omap3-sniper.dts index 40a87330e8c3..b6879cdc5c13 100644 --- a/arch/arm/boot/dts/omap3-sniper.dts +++ b/arch/arm/boot/dts/omap3-sniper.dts @@ -9,7 +9,7 @@ / { model = "LG Optimus Black"; - compatible = "lg,omap3-sniper", "ti,omap36xx", "ti,omap3"; + compatible = "lg,omap3-sniper", "ti,omap3630", "ti,omap36xx", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi index a7a04d78deeb..f24e2326cfa7 100644 --- a/arch/arm/boot/dts/omap3-tao3530.dtsi +++ b/arch/arm/boot/dts/omap3-tao3530.dtsi @@ -222,7 +222,7 @@ pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vmmc1>; vqmmc-supply = <&vsim>; - cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_HIGH>; + cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/omap3-thunder.dts b/arch/arm/boot/dts/omap3-thunder.dts index 6276e7079b36..64221e3b3477 100644 --- a/arch/arm/boot/dts/omap3-thunder.dts +++ b/arch/arm/boot/dts/omap3-thunder.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3 Thunder baseboard with TAO3530 SOM"; - compatible = "technexion,omap3-thunder", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3"; + compatible = "technexion,omap3-thunder", "technexion,omap3-tao3530", "ti,omap3430", "ti,omap34xx", "ti,omap3"; }; &omap3_pmx_core { diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts index db3a2fe84e99..d240e39f2151 100644 --- a/arch/arm/boot/dts/omap3-zoom3.dts +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -9,7 +9,7 @@ / { model = "TI Zoom3"; - compatible = "ti,omap3-zoom3", "ti,omap36xx", "ti,omap3"; + compatible = "ti,omap3-zoom3", "ti,omap3630", "ti,omap36xx", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 4043ecb38016..5698a3e241aa 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -8,6 +8,7 @@ * kind, whether express or implied. */ +#include <dt-bindings/bus/ti-sysc.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pinctrl/omap.h> @@ -502,6 +503,30 @@ status = "disabled"; }; + /* Likely needs to be tagged disabled on HS devices */ + rng_target: target-module@480a0000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x480a003c 0x4>, + <0x480a0040 0x4>, + <0x480a0044 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + ti,syss-mask = <1>; + clocks = <&rng_ick>; + clock-names = "ick"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x480a0000 0x2000>; + + rng: rng@0 { + compatible = "ti,omap2-rng"; + reg = <0x0 0x2000>; + interrupts = <52>; + }; + }; + mcbsp2: mcbsp@49022000 { compatible = "ti,omap3-mcbsp"; reg = <0x49022000 0xff>, diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts index 0abd61108a53..7bfde8aac7ae 100644 --- a/arch/arm/boot/dts/omap3430-sdp.dts +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3430 SDP"; - compatible = "ti,omap3430-sdp", "ti,omap3"; + compatible = "ti,omap3430-sdp", "ti,omap3430", "ti,omap3"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi index 5e9d1afcd422..21079cdf2663 100644 --- a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi @@ -260,6 +260,6 @@ <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>, <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>, <&icr_ick>, <&des2_ick>, <&mspro_ick>, <&mailboxes_ick>, - <&mspro_fck>; + <&rng_ick>, <&mspro_fck>; }; }; diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi index 7b09cbee8bb8..c4dd9801840d 100644 --- a/arch/arm/boot/dts/omap34xx.dtsi +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -16,19 +16,67 @@ / { cpus { cpu: cpu@0 { - /* OMAP343x/OMAP35xx variants OPP1-5 */ - operating-points = < - /* kHz uV */ - 125000 975000 - 250000 1075000 - 500000 1200000 - 550000 1270000 - 600000 1350000 - >; + /* OMAP343x/OMAP35xx variants OPP1-6 */ + operating-points-v2 = <&cpu0_opp_table>; + clock-latency = <300000>; /* From legacy driver */ }; }; + /* see Documentation/devicetree/bindings/opp/opp.txt */ + cpu0_opp_table: opp-table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_conf>; + + opp1-125000000 { + opp-hz = /bits/ 64 <125000000>; + /* + * we currently only select the max voltage from table + * Table 3-3 of the omap3530 Data sheet (SPRS507F). + * Format is: <target min max> + */ + opp-microvolt = <975000 975000 975000>; + /* + * first value is silicon revision bit mask + * second one 720MHz Device Identification bit mask + */ + opp-supported-hw = <0xffffffff 3>; + }; + + opp2-250000000 { + opp-hz = /bits/ 64 <250000000>; + opp-microvolt = <1075000 1075000 1075000>; + opp-supported-hw = <0xffffffff 3>; + opp-suspend; + }; + + opp3-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1200000 1200000 1200000>; + opp-supported-hw = <0xffffffff 3>; + }; + + opp4-550000000 { + opp-hz = /bits/ 64 <550000000>; + opp-microvolt = <1275000 1275000 1275000>; + opp-supported-hw = <0xffffffff 3>; + }; + + opp5-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1350000 1350000 1350000>; + opp-supported-hw = <0xffffffff 3>; + }; + + opp6-720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <1350000 1350000 1350000>; + /* only high-speed grade omap3530 devices */ + opp-supported-hw = <0xffffffff 2>; + turbo-mode; + }; + }; + ocp@68000000 { omap3_pmx_core2: pinmux@480025d8 { compatible = "ti,omap3-padconf", "pinctrl-single"; diff --git a/arch/arm/boot/dts/omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap36xx-clocks.dtsi index e66fc57ec35d..4e9cc9003594 100644 --- a/arch/arm/boot/dts/omap36xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap36xx-clocks.dtsi @@ -105,3 +105,7 @@ <&mcbsp4_ick>, <&uart4_fck>; }; }; + +&dpll4_m4_ck { + ti,max-div = <31>; +}; diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index 1e552f08f120..c618cb257d00 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -19,16 +19,65 @@ }; cpus { - /* OMAP3630/OMAP37xx 'standard device' variants OPP50 to OPP130 */ + /* OMAP3630/OMAP37xx variants OPP50 to OPP130 and OPP1G */ cpu: cpu@0 { - operating-points = < - /* kHz uV */ - 300000 1012500 - 600000 1200000 - 800000 1325000 - >; - clock-latency = <300000>; /* From legacy driver */ + operating-points-v2 = <&cpu0_opp_table>; + + vbb-supply = <&abb_mpu_iva>; + clock-latency = <300000>; /* From omap-cpufreq driver */ + }; + }; + + /* see Documentation/devicetree/bindings/opp/opp.txt */ + cpu0_opp_table: opp-table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_conf>; + + opp50-300000000 { + opp-hz = /bits/ 64 <300000000>; + /* + * we currently only select the max voltage from table + * Table 4-19 of the DM3730 Data sheet (SPRS685B) + * Format is: cpu0-supply: <target min max> + * vbb-supply: <target min max> + */ + opp-microvolt = <1012500 1012500 1012500>, + <1012500 1012500 1012500>; + /* + * first value is silicon revision bit mask + * second one is "speed binned" bit mask + */ + opp-supported-hw = <0xffffffff 3>; + opp-suspend; + }; + + opp100-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1200000 1200000 1200000>, + <1200000 1200000 1200000>; + opp-supported-hw = <0xffffffff 3>; + }; + + opp130-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1325000 1325000 1325000>, + <1325000 1325000 1325000>; + opp-supported-hw = <0xffffffff 3>; }; + + opp1g-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1375000 1375000 1375000>, + <1375000 1375000 1375000>; + /* only on am/dm37x with speed-binned bit set */ + opp-supported-hw = <0xffffffff 2>; + turbo-mode; + }; + }; + + opp_supply_mpu_iva: opp_supply { + compatible = "ti,omap-opp-supply"; + ti,absolute-max-voltage-uv = <1375000>; }; ocp@68000000 { diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi index 685c82a9d03e..0656c32439d2 100644 --- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi +++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi @@ -416,7 +416,7 @@ #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll4_ck>; - ti,max-div = <32>; + ti,max-div = <16>; reg = <0x0e40>; ti,index-starts-at-one; }; diff --git a/arch/arm/boot/dts/omap4-droid-bionic-xt875.dts b/arch/arm/boot/dts/omap4-droid-bionic-xt875.dts new file mode 100644 index 000000000000..ba5c35b7027d --- /dev/null +++ b/arch/arm/boot/dts/omap4-droid-bionic-xt875.dts @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; + +#include "motorola-mapphone-common.dtsi" + +/ { + model = "Motorola Droid Bionic XT875"; + compatible = "motorola,droid-bionic", "ti,omap4430", "ti,omap4"; +}; diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index a40fe8d49da6..c0d2fd92aea3 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -1,784 +1,9 @@ // SPDX-License-Identifier: GPL-2.0-only /dts-v1/; -#include <dt-bindings/input/input.h> -#include "omap443x.dtsi" -#include "motorola-cpcap-mapphone.dtsi" +#include "motorola-mapphone-common.dtsi" / { model = "Motorola Droid 4 XT894"; compatible = "motorola,droid4", "ti,omap4430", "ti,omap4"; - - chosen { - stdout-path = &uart3; - }; - - aliases { - display0 = &lcd0; - display1 = &hdmi0; - }; - - /* - * We seem to have only 1021 MB accessible, 1021 - 1022 is locked, - * then 1023 - 1024 seems to contain mbm. - */ - memory { - device_type = "memory"; - reg = <0x80000000 0x3fd00000>; /* 1021 MB */ - }; - - /* Poweroff GPIO probably connected to CPCAP */ - gpio-poweroff { - compatible = "gpio-poweroff"; - pinctrl-0 = <&poweroff_gpio>; - pinctrl-names = "default"; - gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; /* gpio50 */ - }; - - hdmi0: connector { - compatible = "hdmi-connector"; - pinctrl-0 = <&hdmi_hpd_gpio>; - pinctrl-names = "default"; - label = "hdmi"; - type = "d"; - - hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio63 */ - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_out>; - }; - }; - }; - - /* - * HDMI 5V regulator probably sourced from battery. Let's keep - * keep this as always enabled for HDMI to work until we've - * figured what the encoder chip is. - */ - hdmi_regulator: regulator-hdmi { - compatible = "regulator-fixed"; - regulator-name = "hdmi"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio59 */ - enable-active-high; - regulator-always-on; - }; - - /* FS USB Host PHY on port 1 for mdm6600 */ - fsusb1_phy: usb-phy@1 { - compatible = "motorola,mapphone-mdm6600"; - pinctrl-0 = <&usb_mdm6600_pins>; - pinctrl-names = "default"; - enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; /* gpio_95 */ - power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* gpio_54 */ - reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; /* gpio_49 */ - /* mode: gpio_148 gpio_149 */ - motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>, - <&gpio5 21 GPIO_ACTIVE_HIGH>; - /* cmd: gpio_103 gpio_104 gpio_142 */ - motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>, - <&gpio4 8 GPIO_ACTIVE_HIGH>, - <&gpio5 14 GPIO_ACTIVE_HIGH>; - /* status: gpio_52 gpio_53 gpio_55 */ - motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>, - <&gpio2 21 GPIO_ACTIVE_HIGH>, - <&gpio2 23 GPIO_ACTIVE_HIGH>; - #phy-cells = <0>; - }; - - /* HS USB host TLL nop-phy on port 2 for w3glte */ - hsusb2_phy: usb-phy@2 { - compatible = "usb-nop-xceiv"; - #phy-cells = <0>; - }; - - /* LCD regulator from sw5 source */ - lcd_regulator: regulator-lcd { - compatible = "regulator-fixed"; - regulator-name = "lcd"; - regulator-min-microvolt = <5050000>; - regulator-max-microvolt = <5050000>; - gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* gpio96 */ - enable-active-high; - vin-supply = <&sw5>; - }; - - /* This is probably coming straight from the battery.. */ - wl12xx_vmmc: regulator-wl12xx { - compatible = "regulator-fixed"; - regulator-name = "vwl1271"; - regulator-min-microvolt = <1650000>; - regulator-max-microvolt = <1650000>; - gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; /* gpio94 */ - startup-delay-us = <70000>; - enable-active-high; - }; - - gpio_keys { - compatible = "gpio-keys"; - - volume_down { - label = "Volume Down"; - gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; /* gpio154 */ - linux,code = <KEY_VOLUMEDOWN>; - linux,can-disable; - /* Value above 7.95ms for no GPIO hardware debounce */ - debounce-interval = <10>; - }; - - slider { - label = "Keypad Slide"; - gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */ - linux,input-type = <EV_SW>; - linux,code = <SW_KEYPAD_SLIDE>; - linux,can-disable; - /* Value above 7.95ms for no GPIO hardware debounce */ - debounce-interval = <10>; - }; - }; - - soundcard { - compatible = "audio-graph-card"; - label = "Droid 4 Audio"; - - simple-graph-card,widgets = - "Speaker", "Earpiece", - "Speaker", "Loudspeaker", - "Headphone", "Headphone Jack", - "Microphone", "Internal Mic"; - - simple-graph-card,routing = - "Earpiece", "EP", - "Loudspeaker", "SPKR", - "Headphone Jack", "HSL", - "Headphone Jack", "HSR", - "MICR", "Internal Mic"; - - dais = <&mcbsp2_port>, <&mcbsp3_port>; - }; - - pwm8: dmtimer-pwm-8 { - pinctrl-names = "default"; - pinctrl-0 = <&vibrator_direction_pin>; - - compatible = "ti,omap-dmtimer-pwm"; - #pwm-cells = <3>; - ti,timers = <&timer8>; - ti,clock-source = <0x01>; - }; - - pwm9: dmtimer-pwm-9 { - pinctrl-names = "default"; - pinctrl-0 = <&vibrator_enable_pin>; - - compatible = "ti,omap-dmtimer-pwm"; - #pwm-cells = <3>; - ti,timers = <&timer9>; - ti,clock-source = <0x01>; - }; - - vibrator { - compatible = "pwm-vibrator"; - pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>; - pwm-names = "enable", "direction"; - direction-duty-cycle-ns = <10000000>; - }; -}; - -&dss { - status = "okay"; -}; - -&dsi1 { - status = "okay"; - vdd-supply = <&vcsi>; - - port { - dsi1_out_ep: endpoint { - remote-endpoint = <&lcd0_in>; - lanes = <0 1 2 3 4 5>; - }; - }; - - lcd0: display { - compatible = "panel-dsi-cm"; - label = "lcd0"; - vddi-supply = <&lcd_regulator>; - reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */ - - width-mm = <50>; - height-mm = <89>; - - panel-timing { - clock-frequency = <0>; /* Calculated by dsi */ - - hback-porch = <2>; - hactive = <540>; - hfront-porch = <0>; - hsync-len = <2>; - - vback-porch = <1>; - vactive = <960>; - vfront-porch = <0>; - vsync-len = <1>; - - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - port { - lcd0_in: endpoint { - remote-endpoint = <&dsi1_out_ep>; - }; - }; - }; -}; - -&hdmi { - status = "okay"; - pinctrl-0 = <&dss_hdmi_pins>; - pinctrl-names = "default"; - vdda-supply = <&vdac>; - - port { - hdmi_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - lanes = <1 0 3 2 5 4 7 6>; - }; - }; -}; - -&i2c1 { - tmp105@48 { - compatible = "ti,tmp105"; - reg = <0x48>; - pinctrl-0 = <&tmp105_irq>; - pinctrl-names = "default"; - /* kpd_row0.gpio_178 */ - interrupts-extended = <&gpio6 18 IRQ_TYPE_EDGE_FALLING - &omap4_pmx_core 0x14e>; - interrupt-names = "irq", "wakeup"; - wakeup-source; - }; -}; - -&keypad { - keypad,num-rows = <8>; - keypad,num-columns = <8>; - linux,keymap = < - - /* Row 1 */ - MATRIX_KEY(0, 2, KEY_1) - MATRIX_KEY(0, 6, KEY_2) - MATRIX_KEY(2, 3, KEY_3) - MATRIX_KEY(0, 7, KEY_4) - MATRIX_KEY(0, 4, KEY_5) - MATRIX_KEY(5, 5, KEY_6) - MATRIX_KEY(0, 1, KEY_7) - MATRIX_KEY(0, 5, KEY_8) - MATRIX_KEY(0, 0, KEY_9) - MATRIX_KEY(1, 6, KEY_0) - - /* Row 2 */ - MATRIX_KEY(3, 4, KEY_APOSTROPHE) - MATRIX_KEY(7, 6, KEY_Q) - MATRIX_KEY(7, 7, KEY_W) - MATRIX_KEY(7, 2, KEY_E) - MATRIX_KEY(1, 0, KEY_R) - MATRIX_KEY(4, 4, KEY_T) - MATRIX_KEY(1, 2, KEY_Y) - MATRIX_KEY(6, 7, KEY_U) - MATRIX_KEY(2, 2, KEY_I) - MATRIX_KEY(5, 6, KEY_O) - MATRIX_KEY(3, 7, KEY_P) - MATRIX_KEY(6, 5, KEY_BACKSPACE) - - /* Row 3 */ - MATRIX_KEY(5, 4, KEY_TAB) - MATRIX_KEY(5, 7, KEY_A) - MATRIX_KEY(2, 7, KEY_S) - MATRIX_KEY(7, 0, KEY_D) - MATRIX_KEY(2, 6, KEY_F) - MATRIX_KEY(6, 2, KEY_G) - MATRIX_KEY(6, 6, KEY_H) - MATRIX_KEY(1, 4, KEY_J) - MATRIX_KEY(3, 1, KEY_K) - MATRIX_KEY(2, 1, KEY_L) - MATRIX_KEY(4, 6, KEY_ENTER) - - /* Row 4 */ - MATRIX_KEY(3, 6, KEY_LEFTSHIFT) /* KEY_CAPSLOCK */ - MATRIX_KEY(6, 1, KEY_Z) - MATRIX_KEY(7, 4, KEY_X) - MATRIX_KEY(5, 1, KEY_C) - MATRIX_KEY(1, 7, KEY_V) - MATRIX_KEY(2, 4, KEY_B) - MATRIX_KEY(4, 1, KEY_N) - MATRIX_KEY(1, 1, KEY_M) - MATRIX_KEY(3, 5, KEY_COMMA) - MATRIX_KEY(5, 2, KEY_DOT) - MATRIX_KEY(6, 3, KEY_UP) - MATRIX_KEY(7, 3, KEY_OK) - - /* Row 5 */ - MATRIX_KEY(2, 5, KEY_LEFTCTRL) /* KEY_LEFTSHIFT */ - MATRIX_KEY(4, 5, KEY_LEFTALT) /* SYM */ - MATRIX_KEY(6, 0, KEY_MINUS) - MATRIX_KEY(4, 7, KEY_EQUAL) - MATRIX_KEY(1, 5, KEY_SPACE) - MATRIX_KEY(3, 2, KEY_SLASH) - MATRIX_KEY(4, 3, KEY_LEFT) - MATRIX_KEY(5, 3, KEY_DOWN) - MATRIX_KEY(3, 3, KEY_RIGHT) - - /* Side buttons, KEY_VOLUMEDOWN and KEY_PWER are on CPCAP? */ - MATRIX_KEY(5, 0, KEY_VOLUMEUP) - >; -}; - -&mmc1 { - vmmc-supply = <&vwlan2>; - bus-width = <4>; - cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* gpio176 */ -}; - -&mmc2 { - vmmc-supply = <&vsdio>; - bus-width = <8>; - ti,non-removable; -}; - -&mmc3 { - vmmc-supply = <&wl12xx_vmmc>; - /* uart2_tx.sdmmc3_dat1 pad as wakeirq */ - interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH - &omap4_pmx_core 0xde>; - interrupt-names = "irq", "wakeup"; - non-removable; - bus-width = <4>; - cap-power-off-card; - keep-power-in-suspend; - - #address-cells = <1>; - #size-cells = <0>; - wlcore: wlcore@2 { - compatible = "ti,wl1285", "ti,wl1283"; - reg = <2>; - /* gpio_100 with gpmc_wait2 pad as wakeirq */ - interrupts-extended = <&gpio4 4 IRQ_TYPE_LEVEL_HIGH>, - <&omap4_pmx_core 0x4e>; - interrupt-names = "irq", "wakeup"; - ref-clock-frequency = <26000000>; - tcxo-clock-frequency = <26000000>; - }; -}; - -&i2c1 { - led-controller@38 { - compatible = "ti,lm3532"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x38>; - - enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; - - ramp-up-us = <1024>; - ramp-down-us = <8193>; - - led@0 { - reg = <0>; - led-sources = <2>; - ti,led-mode = <0>; - label = ":backlight"; - linux,default-trigger = "backlight"; - }; - - led@1 { - reg = <1>; - led-sources = <1>; - ti,led-mode = <0>; - label = ":kbd_backlight"; - }; - }; -}; - -&i2c2 { - touchscreen@4a { - compatible = "atmel,maxtouch"; - reg = <0x4a>; - pinctrl-names = "default"; - pinctrl-0 = <&touchscreen_pins>; - - reset-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio173 */ - - /* gpio_183 with sys_nirq2 pad as wakeup */ - interrupts-extended = <&gpio6 23 IRQ_TYPE_EDGE_FALLING>, - <&omap4_pmx_core 0x160>; - interrupt-names = "irq", "wakeup"; - wakeup-source; - }; - - isl29030@44 { - compatible = "isil,isl29030"; - reg = <0x44>; - - pinctrl-names = "default"; - pinctrl-0 = <&als_proximity_pins>; - - interrupt-parent = <&gpio6>; - interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */ - }; -}; - -&omap4_pmx_core { - - /* hdmi_hpd.gpio_63 */ - hdmi_hpd_gpio: pinmux_hdmi_hpd_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3) - >; - }; - - /* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */ - dss_hdmi_pins: pinmux_dss_hdmi_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) - OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) - OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) - >; - }; - - /* gpmc_ncs0.gpio_50 */ - poweroff_gpio: pinmux_poweroff_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x074, PIN_OUTPUT_PULLUP | MUX_MODE3) - >; - }; - - /* kpd_row0.gpio_178 */ - tmp105_irq: pinmux_tmp105_irq { - pinctrl-single,pins = < - OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3) - >; - }; - - usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins { - /* gpio_60 */ - pinctrl-single,pins = < - OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) - >; - }; - - touchscreen_pins: pinmux_touchscreen_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3) - OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3) - >; - }; - - als_proximity_pins: pinmux_als_proximity_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3) - >; - }; - - usb_mdm6600_pins: pinmux_usb_mdm6600_pins { - pinctrl-single,pins = < - /* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */ - OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3) - - /* power 0x4a10007c gpmc_nwp.gpio_54 c25 */ - OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) - - /* reset 0x4a100072 gpmc_a25.gpio_49 d20 */ - OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3) - - /* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */ - OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3) - - /* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */ - OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3) - - /* status0 0x4a10007e gpmc_clk.gpio_55 b22 */ - OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3) - - /* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */ - OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) - - /* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */ - OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) - - /* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */ - OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3) - - /* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */ - OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3) - - /* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */ - OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3) - >; - }; - - usb_ulpi_pins: pinmux_usb_ulpi_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x196, MUX_MODE7) - OMAP4_IOPAD(0x198, MUX_MODE7) - OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE0) - >; - }; - - /* usb0_otg_dp and usb0_otg_dm */ - usb_utmi_pins: pinmux_usb_utmi_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0) - OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0) - OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7) - >; - }; - - /* - * Note that the v3.0.8 stock userspace dynamically remuxes uart1 - * rts pin probably for PM purposes to PIN_INPUT_PULLUP | MUX_MODE7 - * when not used. If needed, we can add rts pin remux later based - * on power measurements. - */ - uart1_pins: pinmux_uart1_pins { - pinctrl-single,pins = < - /* 0x4a10013c mcspi1_cs2.uart1_cts ag23 */ - OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1) - - /* 0x4a10013e mcspi1_cs3.uart1_rts ah23 */ - OMAP4_IOPAD(0x13e, MUX_MODE1) - - /* 0x4a100140 uart3_cts_rctx.uart1_tx f27 */ - OMAP4_IOPAD(0x140, PIN_OUTPUT | MUX_MODE1) - - /* 0x4a1001ca dpm_emu14.uart1_rx aa3 */ - OMAP4_IOPAD(0x1ca, PIN_INPUT_PULLUP | MUX_MODE2) - >; - }; - - /* uart3_tx_irtx and uart3_rx_irrx */ - uart3_pins: pinmux_uart3_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x196, MUX_MODE7) - OMAP4_IOPAD(0x198, MUX_MODE7) - OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1ba, MUX_MODE2) - OMAP4_IOPAD(0x1bc, PIN_INPUT | MUX_MODE2) - OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7) - >; - }; - - uart4_pins: pinmux_uart4_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0) /* uart4_rx */ - OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0) /* uart4_tx */ - OMAP4_IOPAD(0x110, PIN_INPUT_PULLUP | MUX_MODE5) /* uart4_cts */ - OMAP4_IOPAD(0x112, PIN_OUTPUT_PULLUP | MUX_MODE5) /* uart4_rts */ - >; - }; - - mcbsp2_pins: pinmux_mcbsp2_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx */ - OMAP4_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_dr */ - OMAP4_IOPAD(0x0fa, PIN_OUTPUT | MUX_MODE0) /* abe_mcbsp2_dx */ - OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx */ - >; - }; - - mcbsp3_pins: pinmux_mcbsp3_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x106, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_dr */ - OMAP4_IOPAD(0x108, PIN_OUTPUT | MUX_MODE1) /* abe_mcbsp3_dx */ - OMAP4_IOPAD(0x10a, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_clkx */ - OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_fsx */ - >; - }; - - vibrator_direction_pin: pinmux_vibrator_direction_pin { - pinctrl-single,pins = < - OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */ - >; - }; - - vibrator_enable_pin: pinmux_vibrator_enable_pin { - pinctrl-single,pins = < - OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */ - >; - }; -}; - -&omap4_pmx_wkup { - usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins { - /* gpio_wk0 */ - pinctrl-single,pins = < - OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3) - >; - }; -}; - -/* Configure pwm clock source for timers 8 & 9 */ -&timer8 { - assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>; - assigned-clock-parents = <&sys_clkin_ck>; -}; - -&timer9 { - assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>; - assigned-clock-parents = <&sys_clkin_ck>; -}; - -/* - * As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for - * uart1 wakeirq. - */ -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; - interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH - &omap4_pmx_core 0xfc>; -}; - -&uart3 { - interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH - &omap4_pmx_core 0x17c>; -}; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins>; - - bluetooth { - compatible = "ti,wl1285-st"; - enable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; /* gpio 174 */ - max-speed = <3686400>; - }; -}; - -&usbhsohci { - phys = <&fsusb1_phy>; - phy-names = "usb"; -}; - -&usbhsehci { - phys = <&hsusb2_phy>; -}; - -&usbhshost { - port1-mode = "ohci-phy-4pin-dpdm"; - port2-mode = "ehci-tll"; -}; - -/* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */ -&usb_otg_hs { - interface-type = <1>; - mode = <3>; - power = <50>; -}; - -&i2c4 { - ak8975: magnetometer@c { - compatible = "asahi-kasei,ak8975"; - reg = <0x0c>; - - vdd-supply = <&vhvio>; - - interrupt-parent = <&gpio6>; - interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */ - - rotation-matrix = "-1", "0", "0", - "0", "1", "0", - "0", "0", "-1"; - - }; - - lis3dh: accelerometer@18 { - compatible = "st,lis3dh-accel"; - reg = <0x18>; - - vdd-supply = <&vhvio>; - - interrupt-parent = <&gpio2>; - interrupts = <2 IRQ_TYPE_EDGE_BOTH>; /* gpio34 */ - - rotation-matrix = "0", "-1", "0", - "1", "0", "0", - "0", "0", "1"; - }; -}; - -&mcbsp2 { - #sound-dai-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mcbsp2_pins>; - status = "okay"; - - mcbsp2_port: port { - cpu_dai2: endpoint { - dai-format = "i2s"; - remote-endpoint = <&cpcap_audio_codec0>; - frame-master = <&cpcap_audio_codec0>; - bitclock-master = <&cpcap_audio_codec0>; - }; - }; -}; - -&mcbsp3 { - #sound-dai-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mcbsp3_pins>; - status = "okay"; - - mcbsp3_port: port { - cpu_dai3: endpoint { - dai-format = "dsp_a"; - frame-master = <&cpcap_audio_codec1>; - bitclock-master = <&cpcap_audio_codec1>; - remote-endpoint = <&cpcap_audio_codec1>; - }; - }; -}; - -&cpcap_audio_codec0 { - remote-endpoint = <&cpu_dai2>; -}; - -&cpcap_audio_codec1 { - remote-endpoint = <&cpu_dai3>; }; diff --git a/arch/arm/boot/dts/omap4-l4-abe.dtsi b/arch/arm/boot/dts/omap4-l4-abe.dtsi index 8e6662bb9e83..6c892fc9d726 100644 --- a/arch/arm/boot/dts/omap4-l4-abe.dtsi +++ b/arch/arm/boot/dts/omap4-l4-abe.dtsi @@ -86,7 +86,6 @@ target-module@22000 { /* 0x40122000, ap 2 02.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mcbsp1"; reg = <0x2208c 0x4>; reg-names = "sysc"; ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | @@ -120,7 +119,6 @@ target-module@24000 { /* 0x40124000, ap 4 04.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mcbsp2"; reg = <0x2408c 0x4>; reg-names = "sysc"; ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | @@ -154,7 +152,6 @@ target-module@26000 { /* 0x40126000, ap 6 06.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mcbsp3"; reg = <0x2608c 0x4>; reg-names = "sysc"; ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | @@ -188,7 +185,6 @@ target-module@28000 { /* 0x40128000, ap 8 08.0 */ compatible = "ti,sysc-mcasp", "ti,sysc"; - ti,hwmods = "mcasp"; reg = <0x28000 0x4>, <0x28004 0x4>; reg-names = "rev", "sysc"; diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi index d60d5e0ecc4c..83f803be8ee2 100644 --- a/arch/arm/boot/dts/omap4-l4.dtsi +++ b/arch/arm/boot/dts/omap4-l4.dtsi @@ -381,7 +381,6 @@ target-module@2b000 { /* 0x4a0ab000, ap 84 12.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "usb_otg_hs"; reg = <0x2b400 0x4>, <0x2b404 0x4>, <0x2b408 0x4>; @@ -580,7 +579,6 @@ target-module@74000 { /* 0x4a0f4000, ap 27 24.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox"; reg = <0x74000 0x4>, <0x74010 0x4>; reg-names = "rev", "sysc"; @@ -1007,7 +1005,7 @@ ranges = <0x0 0x6000 0x2000>; prm: prm@0 { - compatible = "ti,omap4-prm"; + compatible = "ti,omap4-prm", "simple-bus"; reg = <0x0 0x2000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1085,7 +1083,6 @@ gpio1_target: target-module@0 { /* 0x4a310000, ap 5 14.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio1"; reg = <0x0 0x4>, <0x10 0x4>, <0x114 0x4>; @@ -1550,7 +1547,6 @@ target-module@55000 { /* 0x48055000, ap 15 0c.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio2"; reg = <0x55000 0x4>, <0x55010 0x4>, <0x55114 0x4>; @@ -1584,7 +1580,6 @@ target-module@57000 { /* 0x48057000, ap 17 16.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio3"; reg = <0x57000 0x4>, <0x57010 0x4>, <0x57114 0x4>; @@ -1618,7 +1613,6 @@ target-module@59000 { /* 0x48059000, ap 19 10.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio4"; reg = <0x59000 0x4>, <0x59010 0x4>, <0x59114 0x4>; @@ -1652,7 +1646,6 @@ target-module@5b000 { /* 0x4805b000, ap 21 12.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio5"; reg = <0x5b000 0x4>, <0x5b010 0x4>, <0x5b114 0x4>; @@ -1686,7 +1679,6 @@ target-module@5d000 { /* 0x4805d000, ap 23 14.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio6"; reg = <0x5d000 0x4>, <0x5d010 0x4>, <0x5d114 0x4>; @@ -2020,7 +2012,6 @@ target-module@96000 { /* 0x48096000, ap 37 26.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mcbsp4"; reg = <0x9608c 0x4>; reg-names = "sysc"; ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | @@ -2052,7 +2043,6 @@ target-module@98000 { /* 0x48098000, ap 49 22.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mcspi1"; reg = <0x98000 0x4>, <0x98010 0x4>; reg-names = "rev", "sysc"; @@ -2091,7 +2081,6 @@ target-module@9a000 { /* 0x4809a000, ap 51 2c.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mcspi2"; reg = <0x9a000 0x4>, <0x9a010 0x4>; reg-names = "rev", "sysc"; @@ -2232,7 +2221,6 @@ target-module@b2000 { /* 0x480b2000, ap 65 3c.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "hdq1w"; reg = <0xb2000 0x4>, <0xb2014 0x4>, <0xb2018 0x4>; @@ -2289,7 +2277,6 @@ target-module@b8000 { /* 0x480b8000, ap 69 58.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mcspi3"; reg = <0xb8000 0x4>, <0xb8010 0x4>; reg-names = "rev", "sysc"; @@ -2320,7 +2307,6 @@ target-module@ba000 { /* 0x480ba000, ap 71 32.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mcspi4"; reg = <0xba000 0x4>, <0xba010 0x4>; reg-names = "rev", "sysc"; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 7cc95bc1598b..2de8a6b53de9 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -148,7 +148,7 @@ l4_abe: interconnect@40100000 { }; - ocmcram: ocmcram@40304000 { + ocmcram: sram@40304000 { compatible = "mmio-sram"; reg = <0x40304000 0xa000>; /* 40k */ }; @@ -330,8 +330,8 @@ target-module@56000000 { compatible = "ti,sysc-omap4", "ti,sysc"; - reg = <0x5601fc00 0x4>, - <0x5601fc10 0x4>; + reg = <0x5600fe00 0x4>, + <0x5600fe10 0x4>; reg-names = "rev", "sysc"; ti,sysc-midle = <SYSC_IDLE_FORCE>, <SYSC_IDLE_NO>, @@ -442,3 +442,29 @@ #include "omap4-l4.dtsi" #include "omap4-l4-abe.dtsi" #include "omap44xx-clocks.dtsi" + +&prm { + prm_tesla: prm@400 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0x400 0x100>; + #reset-cells = <1>; + }; + + prm_core: prm@700 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0x700 0x100>; + #reset-cells = <1>; + }; + + prm_ivahd: prm@f00 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0xf00 0x100>; + #reset-cells = <1>; + }; + + prm_device: prm@1b00 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0x1b00 0x40>; + #reset-cells = <1>; + }; +}; diff --git a/arch/arm/boot/dts/omap5-l4-abe.dtsi b/arch/arm/boot/dts/omap5-l4-abe.dtsi index dc9d0532f4cf..23aa90716f7f 100644 --- a/arch/arm/boot/dts/omap5-l4-abe.dtsi +++ b/arch/arm/boot/dts/omap5-l4-abe.dtsi @@ -86,7 +86,6 @@ target-module@22000 { /* 0x40122000, ap 2 02.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mcbsp1"; reg = <0x2208c 0x4>; reg-names = "sysc"; ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | @@ -120,7 +119,6 @@ target-module@24000 { /* 0x40124000, ap 4 04.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mcbsp2"; reg = <0x2408c 0x4>; reg-names = "sysc"; ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | @@ -154,7 +152,6 @@ target-module@26000 { /* 0x40126000, ap 6 06.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mcbsp3"; reg = <0x2608c 0x4>; reg-names = "sysc"; ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi index 0960348002ad..25aacf1ba708 100644 --- a/arch/arm/boot/dts/omap5-l4.dtsi +++ b/arch/arm/boot/dts/omap5-l4.dtsi @@ -593,7 +593,6 @@ target-module@74000 { /* 0x4a0f4000, ap 25 04.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox"; reg = <0x74000 0x4>, <0x74010 0x4>; reg-names = "rev", "sysc"; @@ -1033,7 +1032,6 @@ target-module@20000 { /* 0x48020000, ap 3 04.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart3"; reg = <0x20050 0x4>, <0x20054 0x4>, <0x20058 0x4>; @@ -1176,7 +1174,6 @@ target-module@51000 { /* 0x48051000, ap 45 2e.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio7"; reg = <0x51000 0x4>, <0x51010 0x4>, <0x51114 0x4>; @@ -1210,7 +1207,6 @@ target-module@53000 { /* 0x48053000, ap 35 36.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio8"; reg = <0x53000 0x4>, <0x53010 0x4>, <0x53114 0x4>; @@ -1244,7 +1240,6 @@ target-module@55000 { /* 0x48055000, ap 13 0e.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio2"; reg = <0x55000 0x4>, <0x55010 0x4>, <0x55114 0x4>; @@ -1278,7 +1273,6 @@ target-module@57000 { /* 0x48057000, ap 15 06.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio3"; reg = <0x57000 0x4>, <0x57010 0x4>, <0x57114 0x4>; @@ -1312,7 +1306,6 @@ target-module@59000 { /* 0x48059000, ap 17 16.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio4"; reg = <0x59000 0x4>, <0x59010 0x4>, <0x59114 0x4>; @@ -1346,7 +1339,6 @@ target-module@5b000 { /* 0x4805b000, ap 19 1e.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio5"; reg = <0x5b000 0x4>, <0x5b010 0x4>, <0x5b114 0x4>; @@ -1380,7 +1372,6 @@ target-module@5d000 { /* 0x4805d000, ap 21 26.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio6"; reg = <0x5d000 0x4>, <0x5d010 0x4>, <0x5d114 0x4>; @@ -1414,7 +1405,6 @@ target-module@60000 { /* 0x48060000, ap 23 24.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c3"; reg = <0x60000 0x8>, <0x60010 0x8>, <0x60090 0x8>; @@ -1446,7 +1436,6 @@ target-module@66000 { /* 0x48066000, ap 63 4c.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart5"; reg = <0x66050 0x4>, <0x66054 0x4>, <0x66058 0x4>; @@ -1476,7 +1465,6 @@ target-module@68000 { /* 0x48068000, ap 53 54.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart6"; reg = <0x68050 0x4>, <0x68054 0x4>, <0x68058 0x4>; @@ -1506,7 +1494,6 @@ target-module@6a000 { /* 0x4806a000, ap 24 0a.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart1"; reg = <0x6a050 0x4>, <0x6a054 0x4>, <0x6a058 0x4>; @@ -1536,7 +1523,6 @@ target-module@6c000 { /* 0x4806c000, ap 26 22.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart2"; reg = <0x6c050 0x4>, <0x6c054 0x4>, <0x6c058 0x4>; @@ -1566,7 +1552,6 @@ target-module@6e000 { /* 0x4806e000, ap 28 44.1 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart4"; reg = <0x6e050 0x4>, <0x6e054 0x4>, <0x6e058 0x4>; @@ -1596,7 +1581,6 @@ target-module@70000 { /* 0x48070000, ap 30 14.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c1"; reg = <0x70000 0x8>, <0x70010 0x8>, <0x70090 0x8>; @@ -1628,7 +1612,6 @@ target-module@72000 { /* 0x48072000, ap 32 1c.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c2"; reg = <0x72000 0x8>, <0x72010 0x8>, <0x72090 0x8>; @@ -1668,7 +1651,6 @@ target-module@7a000 { /* 0x4807a000, ap 81 2c.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c4"; reg = <0x7a000 0x8>, <0x7a010 0x8>, <0x7a090 0x8>; @@ -1700,7 +1682,6 @@ target-module@7c000 { /* 0x4807c000, ap 83 34.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c5"; reg = <0x7c000 0x8>, <0x7c010 0x8>, <0x7c090 0x8>; @@ -1798,7 +1779,6 @@ target-module@98000 { /* 0x48098000, ap 47 08.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mcspi1"; reg = <0x98000 0x4>, <0x98010 0x4>; reg-names = "rev", "sysc"; @@ -1837,7 +1817,6 @@ target-module@9a000 { /* 0x4809a000, ap 49 10.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mcspi2"; reg = <0x9a000 0x4>, <0x9a010 0x4>; reg-names = "rev", "sysc"; @@ -1871,7 +1850,6 @@ target-module@9c000 { /* 0x4809c000, ap 51 3a.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc1"; reg = <0x9c000 0x4>, <0x9c010 0x4>; reg-names = "rev", "sysc"; @@ -1931,7 +1909,6 @@ target-module@ad000 { /* 0x480ad000, ap 61 20.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc3"; reg = <0xad000 0x4>, <0xad010 0x4>; reg-names = "rev", "sysc"; @@ -1972,7 +1949,6 @@ target-module@b4000 { /* 0x480b4000, ap 65 42.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc2"; reg = <0xb4000 0x4>, <0xb4010 0x4>; reg-names = "rev", "sysc"; @@ -2005,7 +1981,6 @@ target-module@b8000 { /* 0x480b8000, ap 67 32.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mcspi3"; reg = <0xb8000 0x4>, <0xb8010 0x4>; reg-names = "rev", "sysc"; @@ -2036,7 +2011,6 @@ target-module@ba000 { /* 0x480ba000, ap 69 18.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mcspi4"; reg = <0xba000 0x4>, <0xba010 0x4>; reg-names = "rev", "sysc"; @@ -2067,7 +2041,6 @@ target-module@d1000 { /* 0x480d1000, ap 71 28.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc4"; reg = <0xd1000 0x4>, <0xd1010 0x4>; reg-names = "rev", "sysc"; @@ -2100,7 +2073,6 @@ target-module@d5000 { /* 0x480d5000, ap 73 30.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc5"; reg = <0xd5000 0x4>, <0xd5010 0x4>; reg-names = "rev", "sysc"; @@ -2296,7 +2268,6 @@ target-module@0 { /* 0x4ae10000, ap 5 10.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio1"; reg = <0x0 0x4>, <0x10 0x4>, <0x114 0x4>; @@ -2331,7 +2302,6 @@ target-module@4000 { /* 0x4ae14000, ap 7 14.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "wd_timer2"; reg = <0x4000 0x4>, <0x4010 0x4>, <0x4014 0x4>; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 1fb7937638f0..1f6ad1debc90 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -162,7 +162,7 @@ l4_abe: interconnect@40100000 { }; - ocmcram: ocmcram@40300000 { + ocmcram: sram@40300000 { compatible = "mmio-sram"; reg = <0x40300000 0x20000>; /* 128k */ }; @@ -435,3 +435,29 @@ #include "omap5-l4-abe.dtsi" #include "omap54xx-clocks.dtsi" + +&prm { + prm_dsp: prm@400 { + compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; + reg = <0x400 0x100>; + #reset-cells = <1>; + }; + + prm_core: prm@700 { + compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; + reg = <0x700 0x100>; + #reset-cells = <1>; + }; + + prm_iva: prm@1200 { + compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; + reg = <0x1200 0x100>; + #reset-cells = <1>; + }; + + prm_device: prm@1c00 { + compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; + reg = <0x1c00 0x100>; + #reset-cells = <1>; + }; +}; diff --git a/arch/arm/boot/dts/openbmc-flash-layout-128.dtsi b/arch/arm/boot/dts/openbmc-flash-layout-128.dtsi new file mode 100644 index 000000000000..05101a38c5bd --- /dev/null +++ b/arch/arm/boot/dts/openbmc-flash-layout-128.dtsi @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0+ + +partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + u-boot@0 { + reg = <0x0 0xe0000>; // 896KB + label = "u-boot"; + }; + + u-boot-env@e0000 { + reg = <0xe0000 0x20000>; // 128KB + label = "u-boot-env"; + }; + + kernel@100000 { + reg = <0x100000 0x900000>; // 9MB + label = "kernel"; + }; + + rofs@a00000 { + reg = <0xa00000 0x5600000>; // 86MB + label = "rofs"; + }; + + rwfs@6000000 { + reg = <0x6000000 0x2000000>; // 32MB + label = "rwfs"; + }; +}; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index 56f51599852d..8ef26da32ff4 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -206,6 +206,18 @@ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; }; + sdhci: sdhci@7824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x7824900 0x11c>, <0x7824000 0x800>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + bus-width = <8>; + clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_DCD_XO_CLK>; + clock-names = "core", "iface", "xo"; + status = "disabled"; + }; + blsp_dma: dma@7884000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07884000 0x23000>; diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts index bf402ae39226..26160394d717 100644 --- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts +++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts @@ -221,6 +221,8 @@ regulator-max-microvolt = <2950000>; regulator-boot-on; + regulator-system-load = <200000>; + regulator-allow-set-load; }; l21 { @@ -272,14 +274,6 @@ }; }; - sdhc2_cd_pin_a: sdhc2-cd-pin-active { - pins = "gpio62"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - sdhc2_pin_a: sdhc2-pin-active { clk { pins = "sdc2_clk"; @@ -317,7 +311,7 @@ bus-width = <4>; pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; + pinctrl-0 = <&sdhc2_pin_a>; }; usb@f9a55000 { @@ -344,6 +338,16 @@ }; }; }; + + imem@fe805000 { + status = "okay"; + + reboot-mode { + mode-normal = <0x77665501>; + mode-bootloader = <0x77665500>; + mode-recovery = <0x77665502>; + }; + }; }; &spmi_bus { diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 369e58f64145..9a84eb0cbbe6 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -217,6 +217,96 @@ }; }; }; + + q6-dsp-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 1>; + + trips { + q6_dsp_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modemtx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 2>; + + trips { + modemtx_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 3>; + + trips { + video_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 4>; + + trips { + wlan_alert0: trip-point0 { + temperature = <105000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-thermal-top { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 9>; + + trips { + gpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-thermal-bottom { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 10>; + + trips { + gpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; }; cpu-pmu { @@ -441,6 +531,8 @@ nvmem-cells = <&tsens_calib>, <&tsens_backup>; nvmem-cell-names = "calib", "calib_backup"; #qcom,sensors = <11>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; #thermal-sensor-cells = <1>; }; @@ -1217,6 +1309,17 @@ clock-names = "iface"; }; }; + + imem@fe805000 { + status = "disabled"; + compatible = "syscon", "simple-mfd"; + reg = <0xfe805000 0x1000>; + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x65c>; + }; + }; }; smd { diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index f198480c8ef4..c1f2012d1c8b 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -178,6 +178,16 @@ qcom,vs-soft-start-strength = <0>; regulator-initial-mode = <1>; }; + + pm8941_5vs2: 5vs2 { + regulator-enable-ramp-delay = <1000>; + regulator-pull-down; + regulator-over-current-protection; + qcom,ocp-max-retries = <10>; + qcom,ocp-retry-delay = <30>; + qcom,vs-soft-start-strength = <0>; + regulator-initial-mode = <1>; + }; }; }; }; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 83cc619861b2..6ec2cf7eb354 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -325,10 +325,10 @@ #size-cells = <0>; }; - /* - * IIC2 and I2C2 may be switched using pinmux. - * A fallback to GPIO is also provided. - */ + /* + * IIC2 and I2C2 may be switched using pinmux. + * A fallback to GPIO is also provided. + */ i2chdmi: i2c-12 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>; diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 42f3313e6988..48fbeb6340fd 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -65,81 +65,81 @@ compatible = "gpio-keys"; key-1 { - gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; - linux,code = <KEY_1>; - label = "SW2-1"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_1>; + label = "SW2-1"; + wakeup-source; + debounce-interval = <20>; }; key-2 { - gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; - linux,code = <KEY_2>; - label = "SW2-2"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_2>; + label = "SW2-2"; + wakeup-source; + debounce-interval = <20>; }; key-3 { - gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; - linux,code = <KEY_3>; - label = "SW2-3"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_3>; + label = "SW2-3"; + wakeup-source; + debounce-interval = <20>; }; key-4 { - gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; - linux,code = <KEY_4>; - label = "SW2-4"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_4>; + label = "SW2-4"; + wakeup-source; + debounce-interval = <20>; }; key-a { - gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; - linux,code = <KEY_A>; - label = "SW30"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_A>; + label = "SW30"; + wakeup-source; + debounce-interval = <20>; }; key-b { - gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; - linux,code = <KEY_B>; - label = "SW31"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_B>; + label = "SW31"; + wakeup-source; + debounce-interval = <20>; }; key-c { - gpios = <&gpio7 2 GPIO_ACTIVE_LOW>; - linux,code = <KEY_C>; - label = "SW32"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio7 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_C>; + label = "SW32"; + wakeup-source; + debounce-interval = <20>; }; key-d { - gpios = <&gpio7 3 GPIO_ACTIVE_LOW>; - linux,code = <KEY_D>; - label = "SW33"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio7 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_D>; + label = "SW33"; + wakeup-source; + debounce-interval = <20>; }; key-e { - gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; - linux,code = <KEY_E>; - label = "SW34"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; + linux,code = <KEY_E>; + label = "SW34"; + wakeup-source; + debounce-interval = <20>; }; key-f { - gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; - linux,code = <KEY_F>; - label = "SW35"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_F>; + label = "SW35"; + wakeup-source; + debounce-interval = <20>; }; key-g { - gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; - linux,code = <KEY_G>; - label = "SW36"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_G>; + label = "SW36"; + wakeup-source; + debounce-interval = <20>; }; }; diff --git a/arch/arm/boot/dts/rda8810pl.dtsi b/arch/arm/boot/dts/rda8810pl.dtsi index 19cde895bf65..f30d6ece49fb 100644 --- a/arch/arm/boot/dts/rda8810pl.dtsi +++ b/arch/arm/boot/dts/rda8810pl.dtsi @@ -33,6 +33,21 @@ ranges; }; + modem@10000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000000 0xfffffff>; + + gpioc@1a08000 { + compatible = "rda,8810pl-gpio"; + reg = <0x1a08000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + }; + }; + apb@20800000 { compatible = "simple-bus"; #address-cells = <1>; @@ -60,6 +75,39 @@ <17 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hwtimer", "ostimer"; }; + + gpioa@30000 { + compatible = "rda,8810pl-gpio"; + reg = <0x30000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpiob@31000 { + compatible = "rda,8810pl-gpio"; + reg = <0x31000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpiod@32000 { + compatible = "rda,8810pl-gpio"; + reg = <0x32000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + }; }; apb@20a00000 { diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index c776321b2cc4..c70182c5aeb1 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -696,8 +696,8 @@ hdmi { hdmi_ctl: hdmi-ctl { - rockchip,pins = <1 RK_PB0 1 &pcfg_pull_none>, - <1 RK_PB1 1 &pcfg_pull_none>, + rockchip,pins = <1 RK_PB0 1 &pcfg_pull_none>, + <1 RK_PB1 1 &pcfg_pull_none>, <1 RK_PB2 1 &pcfg_pull_none>, <1 RK_PB3 1 &pcfg_pull_none>; }; diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi index 9f9e2bfd1295..44bb5e6f83b1 100644 --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -230,14 +230,14 @@ }; emmc { - emmc_reset: emmc-reset { - rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; - }; + emmc_reset: emmc-reset { + rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; }; gmac { phy_rst: phy-rst { - rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi index 81e4e953d4a4..0aeef23ca3db 100644 --- a/arch/arm/boot/dts/rk3288-tinker.dtsi +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi @@ -382,18 +382,15 @@ pmic { pmic_int: pmic-int { - rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO \ - &pcfg_pull_up>; + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; dvs_1: dvs-1 { - rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO \ - &pcfg_pull_down>; + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>; }; dvs_2: dvs-2 { - rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO \ - &pcfg_pull_down>; + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; }; }; @@ -406,8 +403,7 @@ }; sdmmc_clk: sdmmc-clk { - rockchip,pins = <6 RK_PC4 1 \ - &pcfg_pull_none_drv_8ma>; + rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>; }; sdmmc_cmd: sdmmc-cmd { @@ -432,7 +428,7 @@ sdio { wifi_enable: wifi-enable { rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>, - <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi index 445270aa136e..51208d161d65 100644 --- a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi @@ -17,6 +17,7 @@ rockchip,hp-det-gpios = <&gpio6 RK_PA5 GPIO_ACTIVE_HIGH>; rockchip,mic-det-gpios = <&gpio6 RK_PB3 GPIO_ACTIVE_LOW>; rockchip,headset-codec = <&headsetcodec>; + rockchip,hdmi-codec = <&hdmi>; }; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-edp.dtsi b/arch/arm/boot/dts/rk3288-veyron-edp.dtsi index b12e061c5f7f..300a7e32c978 100644 --- a/arch/arm/boot/dts/rk3288-veyron-edp.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-edp.dtsi @@ -41,39 +41,8 @@ backlight: backlight { compatible = "pwm-backlight"; - brightness-levels = < - 0 1 2 3 4 5 6 7 - 8 9 10 11 12 13 14 15 - 16 17 18 19 20 21 22 23 - 24 25 26 27 28 29 30 31 - 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 - 48 49 50 51 52 53 54 55 - 56 57 58 59 60 61 62 63 - 64 65 66 67 68 69 70 71 - 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 - 88 89 90 91 92 93 94 95 - 96 97 98 99 100 101 102 103 - 104 105 106 107 108 109 110 111 - 112 113 114 115 116 117 118 119 - 120 121 122 123 124 125 126 127 - 128 129 130 131 132 133 134 135 - 136 137 138 139 140 141 142 143 - 144 145 146 147 148 149 150 151 - 152 153 154 155 156 157 158 159 - 160 161 162 163 164 165 166 167 - 168 169 170 171 172 173 174 175 - 176 177 178 179 180 181 182 183 - 184 185 186 187 188 189 190 191 - 192 193 194 195 196 197 198 199 - 200 201 202 203 204 205 206 207 - 208 209 210 211 212 213 214 215 - 216 217 218 219 220 221 222 223 - 224 225 226 227 228 229 230 231 - 232 233 234 235 236 237 238 239 - 240 241 242 243 244 245 246 247 - 248 249 250 251 252 253 254 255>; + brightness-levels = <0 255>; + num-interpolated-steps = <255>; default-brightness-level = <128>; enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts index 80386203e85b..a4966e505a2f 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts @@ -20,39 +20,8 @@ &backlight { /* Jaq panel PWM must be >= 3%, so start non-zero brightness at 8 */ - brightness-levels = < - 0 - 8 9 10 11 12 13 14 15 - 16 17 18 19 20 21 22 23 - 24 25 26 27 28 29 30 31 - 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 - 48 49 50 51 52 53 54 55 - 56 57 58 59 60 61 62 63 - 64 65 66 67 68 69 70 71 - 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 - 88 89 90 91 92 93 94 95 - 96 97 98 99 100 101 102 103 - 104 105 106 107 108 109 110 111 - 112 113 114 115 116 117 118 119 - 120 121 122 123 124 125 126 127 - 128 129 130 131 132 133 134 135 - 136 137 138 139 140 141 142 143 - 144 145 146 147 148 149 150 151 - 152 153 154 155 156 157 158 159 - 160 161 162 163 164 165 166 167 - 168 169 170 171 172 173 174 175 - 176 177 178 179 180 181 182 183 - 184 185 186 187 188 189 190 191 - 192 193 194 195 196 197 198 199 - 200 201 202 203 204 205 206 207 - 208 209 210 211 212 213 214 215 - 216 217 218 219 220 221 222 223 - 224 225 226 227 228 229 230 231 - 232 233 234 235 236 237 238 239 - 240 241 242 243 244 245 246 247 - 248 249 250 251 252 253 254 255>; + brightness-levels = <0 8 255>; + num-interpolated-steps = <247>; }; &rk808 { diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts index aa352d40c991..06a6a9554c48 100644 --- a/arch/arm/boot/dts/rk3288-veyron-mickey.dts +++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts @@ -28,6 +28,13 @@ regulator-boot-on; vin-supply = <&vcc33_sys>; }; + + sound { + compatible = "rockchip,rockchip-audio-max98090"; + rockchip,model = "VEYRON-HDMI"; + rockchip,hdmi-codec = <&hdmi>; + rockchip,i2s-controller = <&i2s>; + }; }; &cpu_thermal { diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index 55955b082501..c833716dbe48 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -38,39 +38,8 @@ &backlight { /* Minnie panel PWM must be >= 1%, so start non-zero brightness at 3 */ - brightness-levels = < - 0 3 4 5 6 7 - 8 9 10 11 12 13 14 15 - 16 17 18 19 20 21 22 23 - 24 25 26 27 28 29 30 31 - 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 - 48 49 50 51 52 53 54 55 - 56 57 58 59 60 61 62 63 - 64 65 66 67 68 69 70 71 - 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 - 88 89 90 91 92 93 94 95 - 96 97 98 99 100 101 102 103 - 104 105 106 107 108 109 110 111 - 112 113 114 115 116 117 118 119 - 120 121 122 123 124 125 126 127 - 128 129 130 131 132 133 134 135 - 136 137 138 139 140 141 142 143 - 144 145 146 147 148 149 150 151 - 152 153 154 155 156 157 158 159 - 160 161 162 163 164 165 166 167 - 168 169 170 171 172 173 174 175 - 176 177 178 179 180 181 182 183 - 184 185 186 187 188 189 190 191 - 192 193 194 195 196 197 198 199 - 200 201 202 203 204 205 206 207 - 208 209 210 211 212 213 214 215 - 216 217 218 219 220 221 222 223 - 224 225 226 227 228 229 230 231 - 232 233 234 235 236 237 238 239 - 240 241 242 243 244 245 246 247 - 248 249 250 251 252 253 254 255>; + brightness-levels = <0 3 255>; + num-interpolated-steps = <252>; }; &i2c_tunnel { diff --git a/arch/arm/boot/dts/rk3288-veyron-tiger.dts b/arch/arm/boot/dts/rk3288-veyron-tiger.dts index 27557203ae33..bebb230e592f 100644 --- a/arch/arm/boot/dts/rk3288-veyron-tiger.dts +++ b/arch/arm/boot/dts/rk3288-veyron-tiger.dts @@ -23,39 +23,8 @@ &backlight { /* Tiger panel PWM must be >= 1%, so start non-zero brightness at 3 */ - brightness-levels = < - 0 3 4 5 6 7 - 8 9 10 11 12 13 14 15 - 16 17 18 19 20 21 22 23 - 24 25 26 27 28 29 30 31 - 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 - 48 49 50 51 52 53 54 55 - 56 57 58 59 60 61 62 63 - 64 65 66 67 68 69 70 71 - 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 - 88 89 90 91 92 93 94 95 - 96 97 98 99 100 101 102 103 - 104 105 106 107 108 109 110 111 - 112 113 114 115 116 117 118 119 - 120 121 122 123 124 125 126 127 - 128 129 130 131 132 133 134 135 - 136 137 138 139 140 141 142 143 - 144 145 146 147 148 149 150 151 - 152 153 154 155 156 157 158 159 - 160 161 162 163 164 165 166 167 - 168 169 170 171 172 173 174 175 - 176 177 178 179 180 181 182 183 - 184 185 186 187 188 189 190 191 - 192 193 194 195 196 197 198 199 - 200 201 202 203 204 205 206 207 - 208 209 210 211 212 213 214 215 - 216 217 218 219 220 221 222 223 - 224 225 226 227 228 229 230 231 - 232 233 234 235 236 237 238 239 - 240 241 242 243 244 245 246 247 - 248 249 250 251 252 253 254 255>; + brightness-levels = <0 3 255>; + num-interpolated-steps = <252>; }; &backlight_regulator { diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index cc893e154fe5..415c75f5783c 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -1023,7 +1023,7 @@ vopb: vop@ff930000 { compatible = "rockchip,rk3288-vop"; - reg = <0x0 0xff930000 0x0 0x19c>; + reg = <0x0 0xff930000 0x0 0x19c>, <0x0 0xff931000 0x0 0x1000>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>; clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; @@ -1073,7 +1073,7 @@ vopl: vop@ff940000 { compatible = "rockchip,rk3288-vop"; - reg = <0x0 0xff940000 0x0 0x19c>; + reg = <0x0 0xff940000 0x0 0x19c>, <0x0 0xff941000 0x0 0x1000>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>; clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; @@ -1391,6 +1391,9 @@ clocks = <&cru PCLK_EFUSE256>; clock-names = "pclk_efuse"; + cpu_id: cpu-id@7 { + reg = <0x07 0x10>; + }; cpu_leakage: cpu_leakage@17 { reg = <0x17 0x1>; }; diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts index 0e159c884f97..1aeac33b0d34 100644 --- a/arch/arm/boot/dts/s3c6410-mini6410.dts +++ b/arch/arm/boot/dts/s3c6410-mini6410.dts @@ -165,6 +165,10 @@ }; }; +&clocks { + clocks = <&fin_pll>; +}; + &sdhci0 { pinctrl-names = "default"; pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; diff --git a/arch/arm/boot/dts/s3c6410-smdk6410.dts b/arch/arm/boot/dts/s3c6410-smdk6410.dts index a9a5689dc462..3bf6c450a26e 100644 --- a/arch/arm/boot/dts/s3c6410-smdk6410.dts +++ b/arch/arm/boot/dts/s3c6410-smdk6410.dts @@ -69,6 +69,10 @@ }; }; +&clocks { + clocks = <&fin_pll>; +}; + &sdhci0 { pinctrl-names = "default"; pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 2e2c1a7b1d1d..565204816e34 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -689,7 +689,7 @@ #clock-cells = <0>; }; - rtc@f80480b0 { + rtc: rtc@f80480b0 { compatible = "atmel,at91rm9200-rtc"; reg = <0xf80480b0 0x30>; interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts index b4c0a76a4d1a..2b645642b935 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts +++ b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts @@ -19,7 +19,7 @@ m25p,fast-read; cdns,page-size = <256>; cdns,block-size = <16>; - cdns,read-delay = <4>; + cdns,read-delay = <3>; cdns,tshsl-ns = <50>; cdns,tsd2d-ns = <50>; cdns,tchsh-ns = <4>; diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index ba08624c6237..58288aa53fee 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -60,7 +60,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@00000000 { device_type = "memory"; reg = <0x00000000 0x2000000>; }; @@ -234,7 +234,6 @@ status = "okay"; pinctrl-0 = <<dc_pins>; pinctrl-names = "default"; - dma-ranges; port { ltdc_out_rgb: endpoint { diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts index 2b1664884ae7..fcc804e3c158 100644 --- a/arch/arm/boot/dts/stm32746g-eval.dts +++ b/arch/arm/boot/dts/stm32746g-eval.dts @@ -55,7 +55,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@c0000000 { device_type = "memory"; reg = <0xc0000000 0x2000000>; }; @@ -95,7 +95,6 @@ joystick { compatible = "gpio-keys"; - #size-cells = <0>; pinctrl-0 = <&joystick_pins>; pinctrl-names = "default"; button-0 { diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts index e19d0fe7dbda..30c0f6717871 100644 --- a/arch/arm/boot/dts/stm32f429-disco.dts +++ b/arch/arm/boot/dts/stm32f429-disco.dts @@ -59,7 +59,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@90000000 { device_type = "memory"; reg = <0x90000000 0x800000>; }; diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts index a3ff04940aec..f3ce477b7bae 100644 --- a/arch/arm/boot/dts/stm32f469-disco.dts +++ b/arch/arm/boot/dts/stm32f469-disco.dts @@ -60,7 +60,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@00000000 { device_type = "memory"; reg = <0x00000000 0x1000000>; }; @@ -166,7 +166,6 @@ }; <dc { - dma-ranges; status = "okay"; port { diff --git a/arch/arm/boot/dts/stm32f469.dtsi b/arch/arm/boot/dts/stm32f469.dtsi index 5ae5213f68cb..be002e8a78ac 100644 --- a/arch/arm/boot/dts/stm32f469.dtsi +++ b/arch/arm/boot/dts/stm32f469.dtsi @@ -8,7 +8,6 @@ dsi: dsi@40016c00 { compatible = "st,stm32-dsi"; reg = <0x40016c00 0x800>; - interrupts = <92>; resets = <&rcc STM32F4_APB2_RESET(DSI)>; reset-names = "apb"; clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>; diff --git a/arch/arm/boot/dts/stm32f746-disco.dts b/arch/arm/boot/dts/stm32f746-disco.dts index 0ba9c5b08ab9..569d23cc61e5 100644 --- a/arch/arm/boot/dts/stm32f746-disco.dts +++ b/arch/arm/boot/dts/stm32f746-disco.dts @@ -55,7 +55,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@c0000000 { device_type = "memory"; reg = <0xC0000000 0x800000>; }; diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts index 6f1d0ac8c31c..1626e00bb2cb 100644 --- a/arch/arm/boot/dts/stm32f769-disco.dts +++ b/arch/arm/boot/dts/stm32f769-disco.dts @@ -55,7 +55,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@c0000000 { device_type = "memory"; reg = <0xC0000000 0x1000000>; }; diff --git a/arch/arm/boot/dts/stm32h743i-disco.dts b/arch/arm/boot/dts/stm32h743i-disco.dts index 3acd2e9c434e..e446d311c520 100644 --- a/arch/arm/boot/dts/stm32h743i-disco.dts +++ b/arch/arm/boot/dts/stm32h743i-disco.dts @@ -53,7 +53,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@d0000000 { device_type = "memory"; reg = <0xd0000000 0x2000000>; }; diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts index e4d3c58f3d97..8f398178f5e5 100644 --- a/arch/arm/boot/dts/stm32h743i-eval.dts +++ b/arch/arm/boot/dts/stm32h743i-eval.dts @@ -53,7 +53,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@d0000000 { device_type = "memory"; reg = <0xd0000000 0x2000000>; }; diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi index 0a3a7d66737b..3d1ecb408b03 100644 --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi @@ -137,6 +137,22 @@ status = "disabled"; }; + adc12_ain_pins_a: adc12-ain-0 { + pins { + pinmux = <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1 in13 */ + <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */ + <STM32_PINMUX('F', 13, ANALOG)>, /* ADC2 in2 */ + <STM32_PINMUX('F', 14, ANALOG)>; /* ADC2 in6 */ + }; + }; + + adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 { + pins { + pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* ADC12 in18 */ + <STM32_PINMUX('A', 5, ANALOG)>; /* ADC12 in19 */ + }; + }; + cec_pins_a: cec-0 { pins { pinmux = <STM32_PINMUX('A', 15, AF4)>; @@ -167,6 +183,18 @@ }; }; + dac_ch1_pins_a: dac-ch1 { + pins { + pinmux = <STM32_PINMUX('A', 4, ANALOG)>; + }; + }; + + dac_ch2_pins_a: dac-ch2 { + pins { + pinmux = <STM32_PINMUX('A', 5, ANALOG)>; + }; + }; + dcmi_pins_a: dcmi-0 { pins { pinmux = <STM32_PINMUX('H', 8, AF13)>,/* DCMI_HSYNC */ diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts index 2e4742c53d04..628c74a45a25 100644 --- a/arch/arm/boot/dts/stm32mp157a-avenger96.dts +++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts @@ -252,14 +252,13 @@ regulator-name = "vbus_otg"; interrupts = <IT_OCP_OTG 0>; interrupt-parent = <&pmic>; - regulator-active-discharge; }; vbus_sw: pwr_sw2 { regulator-name = "vbus_sw"; interrupts = <IT_OCP_SWOUT 0>; interrupt-parent = <&pmic>; - regulator-active-discharge; + regulator-active-discharge = <1>; }; }; @@ -282,6 +281,11 @@ status = "okay"; }; +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + &rng1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts index 0615d1c8a6fc..984a47cbd13d 100644 --- a/arch/arm/boot/dts/stm32mp157a-dk1.dts +++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts @@ -25,6 +25,7 @@ }; memory@c0000000 { + device_type = "memory"; reg = <0xc0000000 0x20000000>; }; @@ -92,7 +93,34 @@ "Playback" , "MCLK", "Capture" , "MCLK", "MICL" , "Mic Bias"; - dais = <&sai2a_port &sai2b_port>; + dais = <&sai2a_port &sai2b_port &i2s2_port>; + status = "okay"; + }; +}; + +&adc { + pinctrl-names = "default"; + pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>; + vdd-supply = <&vdd>; + vdda-supply = <&vdd>; + vref-supply = <&vrefbuf>; + status = "disabled"; + adc1: adc@0 { + /* + * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19. + * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C: + * 5 * (56 + 47kOhms) * 5pF => 2.5us. + * Use arbitrary margin here (e.g. 5us). + */ + st,min-sample-time-nsecs = <5000>; + /* AIN connector, USB Type-C CC1 & CC2 */ + st,adc-channels = <0 1 6 13 18 19>; + status = "okay"; + }; + adc2: adc@100 { + /* AIN connector, USB Type-C CC1 & CC2 */ + st,adc-channels = <0 1 2 6 18 19>; + st,min-sample-time-nsecs = <5000>; status = "okay"; }; }; @@ -146,9 +174,7 @@ reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>; interrupts = <1 IRQ_TYPE_EDGE_FALLING>; interrupt-parent = <&gpiog>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <<dc_pins_a>; - pinctrl-1 = <<dc_pins_sleep_a>; + #sound-dai-cells = <0>; status = "okay"; ports { @@ -161,6 +187,13 @@ remote-endpoint = <<dc_ep0_out>; }; }; + + port@3 { + reg = <3>; + sii9022_tx_endpoint: endpoint { + remote-endpoint = <&i2s2_endpoint>; + }; + }; }; }; @@ -226,7 +259,7 @@ vddcore: buck1 { regulator-name = "vddcore"; - regulator-min-microvolt = <800000>; + regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1350000>; regulator-always-on; regulator-initial-mode = <0>; @@ -327,7 +360,7 @@ vbus_sw: pwr_sw2 { regulator-name = "vbus_sw"; interrupts = <IT_OCP_SWOUT 0>; - regulator-active-discharge; + regulator-active-discharge = <1>; }; }; @@ -346,6 +379,23 @@ }; }; +&i2s2 { + clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + clock-names = "pclk", "i2sclk", "x8k", "x11k"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2s2_pins_a>; + pinctrl-1 = <&i2s2_pins_sleep_a>; + status = "okay"; + + i2s2_port: port { + i2s2_endpoint: endpoint { + remote-endpoint = <&sii9022_tx_endpoint>; + format = "i2s"; + mclk-fs = <256>; + }; + }; +}; + &ipcc { status = "okay"; }; @@ -356,6 +406,9 @@ }; <dc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <<dc_pins_a>; + pinctrl-1 = <<dc_pins_sleep_a>; status = "okay"; port { @@ -379,6 +432,11 @@ status = "okay"; }; +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + &rng1 { status = "okay"; }; @@ -449,3 +507,10 @@ pinctrl-0 = <&uart4_pins_a>; status = "okay"; }; + +&vrefbuf { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + vdda-supply = <&vdd>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts index 20ea601a546d..d26adcbeba33 100644 --- a/arch/arm/boot/dts/stm32mp157c-dk2.dts +++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts @@ -11,14 +11,6 @@ / { model = "STMicroelectronics STM32MP157C-DK2 Discovery Board"; compatible = "st,stm32mp157c-dk2", "st,stm32mp157"; - - reg18: reg18 { - compatible = "regulator-fixed"; - regulator-name = "reg18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; }; &dsi { @@ -61,6 +53,19 @@ }; }; +&i2c1 { + touchscreen@38 { + compatible = "focaltech,ft6236"; + reg = <0x38>; + interrupts = <2 2>; + interrupt-parent = <&gpiof>; + interrupt-controller; + touchscreen-size-x = <480>; + touchscreen-size-y = <800>; + status = "okay"; + }; +}; + <dc { status = "okay"; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index 1d426ea8bdaf..b8cc0fb0ec48 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -74,22 +74,6 @@ serial0 = &uart4; }; - reg11: reg11 { - compatible = "regulator-fixed"; - regulator-name = "reg11"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - reg18: reg18 { - compatible = "regulator-fixed"; - regulator-name = "reg18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - sd_switch: regulator-sd_switch { compatible = "regulator-gpio"; regulator-name = "sd_switch"; @@ -100,7 +84,21 @@ gpios = <&gpiof 14 GPIO_ACTIVE_HIGH>; gpios-states = <0>; - states = <1800000 0x1 2900000 0x0>; + states = <1800000 0x1>, + <2900000 0x0>; + }; +}; + +&dac { + pinctrl-names = "default"; + pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>; + vref-supply = <&vdda>; + status = "disabled"; + dac1: dac@1 { + status = "okay"; + }; + dac2: dac@2 { + status = "okay"; }; }; @@ -143,7 +141,7 @@ vddcore: buck1 { regulator-name = "vddcore"; - regulator-min-microvolt = <800000>; + regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1350000>; regulator-always-on; regulator-initial-mode = <0>; @@ -241,7 +239,7 @@ vbus_sw: pwr_sw2 { regulator-name = "vbus_sw"; interrupts = <IT_OCP_SWOUT 0>; - regulator-active-discharge; + regulator-active-discharge = <1>; }; }; @@ -279,6 +277,11 @@ status = "okay"; }; +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + &rng1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index 91fc0a315c49..3789312c8539 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -32,7 +32,6 @@ joystick { compatible = "gpio-keys"; - #size-cells = <0>; pinctrl-0 = <&joystick_pins>; pinctrl-names = "default"; button-0 { @@ -335,14 +334,12 @@ &usbh_ehci { phys = <&usbphyc_port0>; - phy-names = "usb"; status = "okay"; }; &usbotg_hs { dr_mode = "peripheral"; phys = <&usbphyc_port1 0>; - phy-names = "usb2-phy"; status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi index f98e0370c0bc..ed8b258256d7 100644 --- a/arch/arm/boot/dts/stm32mp157c.dtsi +++ b/arch/arm/boot/dts/stm32mp157c.dtsi @@ -1079,6 +1079,29 @@ #reset-cells = <1>; }; + pwr_regulators: pwr@50001000 { + compatible = "st,stm32mp1,pwr-reg"; + reg = <0x50001000 0x10>; + + reg11: reg11 { + regulator-name = "reg11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + reg18: reg18 { + regulator-name = "reg18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + usb33: usb33 { + regulator-name = "usb33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; + exti: interrupt-controller@5000d000 { compatible = "st,stm32mp1-exti", "syscon"; interrupt-controller; diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index 7033a123c9a3..d6bb82c295f0 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -130,7 +130,7 @@ &i2c1 { status = "okay"; - at24@50 { + eeprom@50 { compatible = "atmel,24c16"; pagesize = <16>; reg = <0x50>; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index ac7638078420..2cf34ae1c17b 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -469,7 +469,6 @@ <&ccu CLK_PLL_VIDEO1_2X>; clock-names = "ahb", "mod", "ddc", "pll-0", "pll-1"; resets = <&ccu RST_AHB1_HDMI>; - reset-names = "ahb"; dma-names = "ddc-tx", "ddc-rx", "audio-tx"; dmas = <&dma 13>, <&dma 13>, <&dma 14>; status = "disabled"; diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts index 3bec3e0a81b2..2fd31a0a0b34 100644 --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts @@ -164,6 +164,22 @@ status = "okay"; }; +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&r_pio>; + interrupts = <0 7 IRQ_TYPE_EDGE_FALLING>; /* PL7 */ + reset-gpios = <&pio 3 5 GPIO_ACTIVE_LOW>; /* PD5 */ + vcc-supply = <®_ldo_io0>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <600>; + }; +}; + &i2c1 { clock-frequency = <400000>; status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 74bb053cf23c..53c38deb8a08 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -583,6 +583,15 @@ reg = <0x1c14000 0x400>; }; + crypto: crypto@1c15000 { + compatible = "allwinner,sun8i-a83t-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + resets = <&ccu RST_BUS_SS>; + clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>; + clock-names = "bus", "mod"; + }; + usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-a83t-musb", "allwinner,sun8i-a33-musb"; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts new file mode 100644 index 000000000000..c73f59900975 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts @@ -0,0 +1,174 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Karl Palsson <karlp@tweak.net.au> + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "FriendlyARM NanoPi Duo2"; + compatible = "friendlyarm,nanopi-duo2", "allwinner,sun8i-h3"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + pwr { + label = "nanopi:red:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + default-state = "on"; + }; + + status { + label = "nanopi:green:status"; + gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */ + }; + }; + + r_gpio_keys { + compatible = "gpio-keys"; + + k1 { + label = "k1"; + linux,code = <BTN_0>; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */ + }; + }; + + reg_vdd_cpux: vdd-cpux-regulator { + compatible = "regulator-gpio"; + regulator-name = "vdd-cpux"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <50>; /* 4ms */ + + enable-active-high; + enable-gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + gpios-states = <0x1>; + states = <1100000 0x0 + 1300000 0x1>; + }; + + reg_vcc_dram: vcc-dram { + compatible = "regulator-fixed"; + regulator-name = "vcc-dram"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ + vin-supply = <®_vcc5v0>; + }; + + reg_vdd_sys: vdd-sys { + compatible = "regulator-fixed"; + regulator-name = "vdd-sys"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + vin-supply = <®_vcc5v0>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; + }; + +}; + +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; + +&ehci0 { + status = "okay"; +}; + +&mmc0 { + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; + vmmc-supply = <®_vcc3v3>; +}; + +&mmc1 { + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + sdio_wifi: sdio_wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */ + interrupt-names = "host-wake"; + }; +}; + +&ohci0 { + status = "okay"; +}; + +®_usb0_vbus { + gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pa_pins>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vcc3v3>; + vddio-supply = <®_vcc3v3>; + device-wakeup-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ + host-wakeup-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */ + shutdown-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ + }; +}; + +&usb_otg { + status = "okay"; + dr_mode = "otg"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + usb0_vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index e37c30e811d3..fe773c72a69b 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -120,6 +120,19 @@ }; soc { + deinterlace: deinterlace@1400000 { + compatible = "allwinner,sun8i-h3-deinterlace"; + reg = <0x01400000 0x20000>; + clocks = <&ccu CLK_BUS_DEINTERLACE>, + <&ccu CLK_DEINTERLACE>, + <&ccu CLK_DRAM_DEINTERLACE>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_DEINTERLACE>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&mbus 9>; + interconnect-names = "dma-mem"; + }; + syscon: system-control@1c00000 { compatible = "allwinner,sun8i-h3-system-control"; reg = <0x01c00000 0x1000>; @@ -153,6 +166,15 @@ allwinner,sram = <&ve_sram 1>; }; + crypto: crypto@1c15000 { + compatible = "allwinner,sun8i-h3-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CE>; + }; + mali: gpu@1c40000 { compatible = "allwinner,sun8i-h3-mali", "arm,mali-400"; reg = <0x01c40000 0x10000>; diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index c9c2688db66d..421dfbbfd7ee 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -266,6 +266,15 @@ #phy-cells = <1>; }; + crypto: crypto@1c15000 { + compatible = "allwinner,sun8i-r40-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CE>; + }; + ehci1: usb@1c19000 { compatible = "allwinner,sun8i-r40-ehci", "generic-ehci"; reg = <0x01c19000 0x100>; diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index b9b6fb00be28..1d900f591d5f 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -457,6 +457,15 @@ reg = <0x01700000 0x100>; }; + crypto: crypto@1c02000 { + compatible = "allwinner,sun9i-a80-crypto"; + reg = <0x01c02000 0x1000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + resets = <&ccu RST_BUS_SS>; + clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>; + clock-names = "bus", "mod"; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c0f000 0x1000>; @@ -947,6 +956,7 @@ compatible = "allwinner,sun6i-a31-wdt"; reg = <0x06000ca0 0x20>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; }; pio: pinctrl@6000800 { @@ -1154,6 +1164,7 @@ compatible = "allwinner,sun6i-a31-wdt"; reg = <0x08001000 0x20>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; }; prcm@8001400 { diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 107eeafad20a..0afea59486c2 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -109,6 +109,7 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; + dma-ranges; ranges; display_clocks: clock@1000000 { @@ -478,6 +479,11 @@ function = "uart2"; }; + uart2_rts_cts_pins: uart2-rts-cts-pins { + pins = "PA2", "PA3"; + function = "uart2"; + }; + uart3_pins: uart3-pins { pins = "PA13", "PA14"; function = "uart3"; @@ -544,6 +550,14 @@ }; }; + mbus: dram-controller@1c62000 { + compatible = "allwinner,sun8i-h3-mbus"; + reg = <0x01c62000 0x1000>; + clocks = <&ccu 113>; + dma-ranges = <0x00000000 0x40000000 0xc0000000>; + #interconnect-cells = <1>; + }; + spi0: spi@1c68000 { compatible = "allwinner,sun8i-h3-spi"; reg = <0x01c68000 0x1000>; diff --git a/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi b/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi index 9af21fe93a5c..fb6b3e1a0b1f 100644 --- a/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi @@ -1,5 +1,9 @@ // SPDX-License-Identifier: GPL-2.0 / { + apbmisc@70000800 { + nvidia,long-ram-code; + }; + clock@60006000 { emc-timings-1 { nvidia,ram-code = <1>; @@ -52,7 +56,154 @@ clocks = <&tegra_car TEGRA124_CLK_PLL_M>; clock-names = "emc-parent"; }; - /* TODO: Add 528MHz frequency */ + timing-528000000 { + clock-frequency = <528000000>; + nvidia,parent-clock-frequency = <528000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; + timing-600000000 { + clock-frequency = <600000000>; + nvidia,parent-clock-frequency = <600000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>; + clock-names = "emc-parent"; + }; + timing-792000000 { + clock-frequency = <792000000>; + nvidia,parent-clock-frequency = <792000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; + }; + + emc-timings-4 { + nvidia,ram-code = <4>; + + timing-12750000 { + clock-frequency = <12750000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-20400000 { + clock-frequency = <20400000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-40800000 { + clock-frequency = <40800000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-68000000 { + clock-frequency = <68000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-102000000 { + clock-frequency = <102000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-204000000 { + clock-frequency = <204000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-300000000 { + clock-frequency = <300000000>; + nvidia,parent-clock-frequency = <600000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_C>; + clock-names = "emc-parent"; + }; + timing-396000000 { + clock-frequency = <396000000>; + nvidia,parent-clock-frequency = <792000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M>; + clock-names = "emc-parent"; + }; + timing-528000000 { + clock-frequency = <528000000>; + nvidia,parent-clock-frequency = <528000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; + timing-600000000 { + clock-frequency = <600000000>; + nvidia,parent-clock-frequency = <600000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>; + clock-names = "emc-parent"; + }; + timing-792000000 { + clock-frequency = <792000000>; + nvidia,parent-clock-frequency = <792000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; + }; + + emc-timings-6 { + nvidia,ram-code = <6>; + + timing-12750000 { + clock-frequency = <12750000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-20400000 { + clock-frequency = <20400000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-40800000 { + clock-frequency = <40800000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-68000000 { + clock-frequency = <68000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-102000000 { + clock-frequency = <102000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-204000000 { + clock-frequency = <204000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-300000000 { + clock-frequency = <300000000>; + nvidia,parent-clock-frequency = <600000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_C>; + clock-names = "emc-parent"; + }; + timing-396000000 { + clock-frequency = <396000000>; + nvidia,parent-clock-frequency = <792000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M>; + clock-names = "emc-parent"; + }; + timing-528000000 { + clock-frequency = <528000000>; + nvidia,parent-clock-frequency = <528000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; timing-600000000 { clock-frequency = <600000000>; nvidia,parent-clock-frequency = <600000000>; @@ -94,149 +245,149 @@ nvidia,emc-zcal-interval = <0x00000000>; nvidia,emc-configuration = < - 0x00000000 - 0x00000003 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000004 - 0x0000000a - 0x00000003 - 0x0000000b - 0x00000000 - 0x00000000 - 0x00000003 - 0x00000003 - 0x00000000 - 0x00000006 - 0x00000006 - 0x00000006 - 0x00000002 - 0x00000000 - 0x00000005 - 0x00000005 - 0x00010000 - 0x00000003 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000004 - 0x0000000c - 0x0000000d - 0x0000000f - 0x00000060 - 0x00000000 - 0x00000018 - 0x00000002 - 0x00000002 - 0x00000001 - 0x00000000 - 0x00000007 - 0x0000000f - 0x00000005 - 0x00000005 - 0x00000004 - 0x00000005 - 0x00000004 - 0x00000000 - 0x00000000 - 0x00000005 - 0x00000005 - 0x00000064 - 0x00000000 - 0x00000000 - 0x00000000 - 0x106aa298 - 0x002c00a0 - 0x00008000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x000fc000 - 0x000fc000 - 0x000fc000 - 0x000fc000 - 0x0000fc00 - 0x0000fc00 - 0x0000fc00 - 0x0000fc00 - 0x10000280 - 0x00000000 - 0x00111111 - 0x00000000 - 0x00000000 - 0x77ffc081 - 0x00000303 - 0x81f1f108 - 0x07070004 - 0x0000003f - 0x016eeeee - 0x51451400 - 0x00514514 - 0x00514514 - 0x51451400 - 0x0000003f - 0x00000007 - 0x00000000 - 0x00000042 - 0x000c000c - 0x00000000 - 0x00000003 - 0x0000f2f3 - 0x800001c5 - 0x0000000a + 0x00000000 /* EMC_RC */ + 0x00000003 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000000 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000060 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000018 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000005 /* EMC_TXSR */ + 0x00000005 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000000 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000064 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000007 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x800001c5 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ >; }; @@ -262,149 +413,149 @@ nvidia,emc-zcal-interval = <0x00000000>; nvidia,emc-configuration = < - 0x00000000 - 0x00000005 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000004 - 0x0000000a - 0x00000003 - 0x0000000b - 0x00000000 - 0x00000000 - 0x00000003 - 0x00000003 - 0x00000000 - 0x00000006 - 0x00000006 - 0x00000006 - 0x00000002 - 0x00000000 - 0x00000005 - 0x00000005 - 0x00010000 - 0x00000003 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000004 - 0x0000000c - 0x0000000d - 0x0000000f - 0x0000009a - 0x00000000 - 0x00000026 - 0x00000002 - 0x00000002 - 0x00000001 - 0x00000000 - 0x00000007 - 0x0000000f - 0x00000006 - 0x00000006 - 0x00000004 - 0x00000005 - 0x00000004 - 0x00000000 - 0x00000000 - 0x00000005 - 0x00000005 - 0x000000a0 - 0x00000000 - 0x00000000 - 0x00000000 - 0x106aa298 - 0x002c00a0 - 0x00008000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x000fc000 - 0x000fc000 - 0x000fc000 - 0x000fc000 - 0x0000fc00 - 0x0000fc00 - 0x0000fc00 - 0x0000fc00 - 0x10000280 - 0x00000000 - 0x00111111 - 0x00000000 - 0x00000000 - 0x77ffc081 - 0x00000303 - 0x81f1f108 - 0x07070004 - 0x0000003f - 0x016eeeee - 0x51451400 - 0x00514514 - 0x00514514 - 0x51451400 - 0x0000003f - 0x0000000b - 0x00000000 - 0x00000042 - 0x000c000c - 0x00000000 - 0x00000003 - 0x0000f2f3 - 0x8000023a - 0x0000000a + 0x00000000 /* EMC_RC */ + 0x00000005 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000000 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x0000009a /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000026 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000006 /* EMC_TXSR */ + 0x00000006 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000000 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x000000a0 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x0000000b /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x8000023a /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ >; }; @@ -430,149 +581,149 @@ nvidia,emc-zcal-interval = <0x00000000>; nvidia,emc-configuration = < - 0x00000001 - 0x0000000a - 0x00000000 - 0x00000001 - 0x00000000 - 0x00000004 - 0x0000000a - 0x00000003 - 0x0000000b - 0x00000000 - 0x00000000 - 0x00000003 - 0x00000003 - 0x00000000 - 0x00000006 - 0x00000006 - 0x00000006 - 0x00000002 - 0x00000000 - 0x00000005 - 0x00000005 - 0x00010000 - 0x00000003 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000004 - 0x0000000c - 0x0000000d - 0x0000000f - 0x00000134 - 0x00000000 - 0x0000004d - 0x00000002 - 0x00000002 - 0x00000001 - 0x00000000 - 0x00000008 - 0x0000000f - 0x0000000c - 0x0000000c - 0x00000004 - 0x00000005 - 0x00000004 - 0x00000000 - 0x00000000 - 0x00000005 - 0x00000005 - 0x0000013f - 0x00000000 - 0x00000000 - 0x00000000 - 0x106aa298 - 0x002c00a0 - 0x00008000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x000fc000 - 0x000fc000 - 0x000fc000 - 0x000fc000 - 0x0000fc00 - 0x0000fc00 - 0x0000fc00 - 0x0000fc00 - 0x10000280 - 0x00000000 - 0x00111111 - 0x00000000 - 0x00000000 - 0x77ffc081 - 0x00000303 - 0x81f1f108 - 0x07070004 - 0x0000003f - 0x016eeeee - 0x51451400 - 0x00514514 - 0x00514514 - 0x51451400 - 0x0000003f - 0x00000015 - 0x00000000 - 0x00000042 - 0x000c000c - 0x00000000 - 0x00000003 - 0x0000f2f3 - 0x80000370 - 0x0000000a + 0x00000001 /* EMC_RC */ + 0x0000000a /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000001 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000134 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x0000004d /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000008 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000000c /* EMC_TXSR */ + 0x0000000c /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000000 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000013f /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000015 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x80000370 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ >; }; @@ -598,149 +749,149 @@ nvidia,emc-zcal-interval = <0x00000000>; nvidia,emc-configuration = < - 0x00000003 - 0x00000011 - 0x00000000 - 0x00000002 - 0x00000000 - 0x00000004 - 0x0000000a - 0x00000003 - 0x0000000b - 0x00000000 - 0x00000000 - 0x00000003 - 0x00000003 - 0x00000000 - 0x00000006 - 0x00000006 - 0x00000006 - 0x00000002 - 0x00000000 - 0x00000005 - 0x00000005 - 0x00010000 - 0x00000003 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000004 - 0x0000000c - 0x0000000d - 0x0000000f - 0x00000202 - 0x00000000 - 0x00000080 - 0x00000002 - 0x00000002 - 0x00000001 - 0x00000000 - 0x0000000f - 0x0000000f - 0x00000013 - 0x00000013 - 0x00000004 - 0x00000005 - 0x00000004 - 0x00000001 - 0x00000000 - 0x00000005 - 0x00000005 - 0x00000213 - 0x00000000 - 0x00000000 - 0x00000000 - 0x106aa298 - 0x002c00a0 - 0x00008000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x000fc000 - 0x000fc000 - 0x000fc000 - 0x000fc000 - 0x0000fc00 - 0x0000fc00 - 0x0000fc00 - 0x0000fc00 - 0x10000280 - 0x00000000 - 0x00111111 - 0x00000000 - 0x00000000 - 0x77ffc081 - 0x00000303 - 0x81f1f108 - 0x07070004 - 0x0000003f - 0x016eeeee - 0x51451400 - 0x00514514 - 0x00514514 - 0x51451400 - 0x0000003f - 0x00000022 - 0x00000000 - 0x00000042 - 0x000c000c - 0x00000000 - 0x00000003 - 0x0000f2f3 - 0x8000050e - 0x0000000a + 0x00000003 /* EMC_RC */ + 0x00000011 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000002 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000202 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000080 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x0000000f /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000013 /* EMC_TXSR */ + 0x00000013 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000001 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000213 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000022 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x8000050e /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ >; }; @@ -766,149 +917,149 @@ nvidia,emc-zcal-interval = <0x00000000>; nvidia,emc-configuration = < - 0x00000004 - 0x0000001a - 0x00000000 - 0x00000003 - 0x00000001 - 0x00000004 - 0x0000000a - 0x00000003 - 0x0000000b - 0x00000001 - 0x00000001 - 0x00000003 - 0x00000003 - 0x00000000 - 0x00000006 - 0x00000006 - 0x00000006 - 0x00000002 - 0x00000000 - 0x00000005 - 0x00000005 - 0x00010000 - 0x00000003 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000004 - 0x0000000c - 0x0000000d - 0x0000000f - 0x00000304 - 0x00000000 - 0x000000c1 - 0x00000002 - 0x00000002 - 0x00000001 - 0x00000000 - 0x00000018 - 0x0000000f - 0x0000001c - 0x0000001c - 0x00000004 - 0x00000005 - 0x00000004 - 0x00000003 - 0x00000000 - 0x00000005 - 0x00000005 - 0x0000031c - 0x00000000 - 0x00000000 - 0x00000000 - 0x106aa298 - 0x002c00a0 - 0x00008000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x000fc000 - 0x000fc000 - 0x000fc000 - 0x000fc000 - 0x0000fc00 - 0x0000fc00 - 0x0000fc00 - 0x0000fc00 - 0x10000280 - 0x00000000 - 0x00111111 - 0x00000000 - 0x00000000 - 0x77ffc081 - 0x00000303 - 0x81f1f108 - 0x07070004 - 0x0000003f - 0x016eeeee - 0x51451400 - 0x00514514 - 0x00514514 - 0x51451400 - 0x0000003f - 0x00000033 - 0x00000000 - 0x00000042 - 0x000c000c - 0x00000000 - 0x00000003 - 0x0000f2f3 - 0x80000713 - 0x0000000a + 0x00000004 /* EMC_RC */ + 0x0000001a /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000003 /* EMC_RAS */ + 0x00000001 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000001 /* EMC_RD_RCD */ + 0x00000001 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000304 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000000c1 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000018 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000001c /* EMC_TXSR */ + 0x0000001c /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000003 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000031c /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000033 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x80000713 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ >; }; @@ -934,149 +1085,149 @@ nvidia,emc-zcal-interval = <0x00020000>; nvidia,emc-configuration = < - 0x00000009 - 0x00000035 - 0x00000000 - 0x00000007 - 0x00000002 - 0x00000005 - 0x0000000a - 0x00000003 - 0x0000000b - 0x00000002 - 0x00000002 - 0x00000003 - 0x00000003 - 0x00000000 - 0x00000005 - 0x00000005 - 0x00000006 - 0x00000002 - 0x00000000 - 0x00000004 - 0x00000006 - 0x00010000 - 0x00000003 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000003 - 0x0000000d - 0x0000000f - 0x00000011 - 0x00000607 - 0x00000000 - 0x00000181 - 0x00000002 - 0x00000002 - 0x00000001 - 0x00000000 - 0x00000032 - 0x0000000f - 0x00000038 - 0x00000038 - 0x00000004 - 0x00000005 - 0x00000004 - 0x00000007 - 0x00000000 - 0x00000005 - 0x00000005 - 0x00000638 - 0x00000000 - 0x00000000 - 0x00000000 - 0x106aa298 - 0x002c00a0 - 0x00008000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00090000 - 0x00090000 - 0x00094000 - 0x00094000 - 0x00009400 - 0x00009000 - 0x00009000 - 0x00009000 - 0x10000280 - 0x00000000 - 0x00111111 - 0x00000000 - 0x00000000 - 0x77ffc081 - 0x00000303 - 0x81f1f108 - 0x07070004 - 0x0000003f - 0x016eeeee - 0x51451400 - 0x00514514 - 0x00514514 - 0x51451400 - 0x0000003f - 0x00000066 - 0x00000000 - 0x00000100 - 0x000c000c - 0x00000000 - 0x00000003 - 0x0000d2b3 - 0x80000d22 - 0x0000000a + 0x00000009 /* EMC_RC */ + 0x00000035 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000007 /* EMC_RAS */ + 0x00000002 /* EMC_RP */ + 0x00000005 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000002 /* EMC_RD_RCD */ + 0x00000002 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000004 /* EMC_EINPUT */ + 0x00000006 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000003 /* EMC_QRST */ + 0x0000000d /* EMC_QSAFE */ + 0x0000000f /* EMC_RDV */ + 0x00000011 /* EMC_RDV_MASK */ + 0x00000607 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000032 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000038 /* EMC_TXSR */ + 0x00000038 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000007 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000638 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00090000 /* EMC_DLL_XFORM_DQ0 */ + 0x00090000 /* EMC_DLL_XFORM_DQ1 */ + 0x00094000 /* EMC_DLL_XFORM_DQ2 */ + 0x00094000 /* EMC_DLL_XFORM_DQ3 */ + 0x00009400 /* EMC_DLL_XFORM_DQ4 */ + 0x00009000 /* EMC_DLL_XFORM_DQ5 */ + 0x00009000 /* EMC_DLL_XFORM_DQ6 */ + 0x00009000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000066 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000d2b3 /* EMC_CFG_PIPE */ + 0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ >; }; @@ -1102,149 +1253,149 @@ nvidia,emc-zcal-interval = <0x00020000>; nvidia,emc-configuration = < - 0x0000000d - 0x0000004c - 0x00000000 - 0x00000009 - 0x00000003 - 0x00000004 - 0x00000008 - 0x00000002 - 0x00000009 - 0x00000003 - 0x00000003 - 0x00000002 - 0x00000002 - 0x00000000 - 0x00000003 - 0x00000003 - 0x00000005 - 0x00000002 - 0x00000000 - 0x00000002 - 0x00000007 - 0x00020000 - 0x00000003 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000001 - 0x0000000e - 0x00000010 - 0x00000012 - 0x000008e4 - 0x00000000 - 0x00000239 - 0x00000001 - 0x00000008 - 0x00000001 - 0x00000000 - 0x0000004a - 0x0000000e - 0x00000051 - 0x00000200 - 0x00000004 - 0x00000005 - 0x00000004 - 0x00000009 - 0x00000000 - 0x00000005 - 0x00000005 - 0x00000924 - 0x00000000 - 0x00000000 - 0x00000000 - 0x104ab098 - 0x002c00a0 - 0x00008000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00098000 - 0x00098000 - 0x00000000 - 0x00098000 - 0x00098000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00060000 - 0x00060000 - 0x00060000 - 0x00060000 - 0x00006000 - 0x00006000 - 0x00006000 - 0x00006000 - 0x10000280 - 0x00000000 - 0x00111111 - 0x00000000 - 0x00000000 - 0x77ffc081 - 0x00000101 - 0x81f1f108 - 0x07070004 - 0x00000000 - 0x016eeeee - 0x51451420 - 0x00514514 - 0x00514514 - 0x51451400 - 0x0000003f - 0x00000096 - 0x00000000 - 0x00000100 - 0x0174000c - 0x00000000 - 0x00000003 - 0x000052a3 - 0x800012d7 - 0x00000009 + 0x0000000d /* EMC_RC */ + 0x0000004c /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000009 /* EMC_RAS */ + 0x00000003 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x00000008 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x00000009 /* EMC_W2P */ + 0x00000003 /* EMC_RD_RCD */ + 0x00000003 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000003 /* EMC_WDV */ + 0x00000003 /* EMC_WDV_MASK */ + 0x00000005 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000002 /* EMC_EINPUT */ + 0x00000007 /* EMC_EINPUT_DURATION */ + 0x00020000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000001 /* EMC_QRST */ + 0x0000000e /* EMC_QSAFE */ + 0x00000010 /* EMC_RDV */ + 0x00000012 /* EMC_RDV_MASK */ + 0x000008e4 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000239 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000001 /* EMC_PDEX2WR */ + 0x00000008 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x0000004a /* EMC_AR2PDEN */ + 0x0000000e /* EMC_RW2PDEN */ + 0x00000051 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000009 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000924 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00030000 /* EMC_DLL_XFORM_DQS0 */ + 0x00030000 /* EMC_DLL_XFORM_DQS1 */ + 0x00030000 /* EMC_DLL_XFORM_DQS2 */ + 0x00030000 /* EMC_DLL_XFORM_DQS3 */ + 0x00030000 /* EMC_DLL_XFORM_DQS4 */ + 0x00030000 /* EMC_DLL_XFORM_DQS5 */ + 0x00030000 /* EMC_DLL_XFORM_DQS6 */ + 0x00030000 /* EMC_DLL_XFORM_DQS7 */ + 0x00030000 /* EMC_DLL_XFORM_DQS8 */ + 0x00030000 /* EMC_DLL_XFORM_DQS9 */ + 0x00030000 /* EMC_DLL_XFORM_DQS10 */ + 0x00030000 /* EMC_DLL_XFORM_DQS11 */ + 0x00030000 /* EMC_DLL_XFORM_DQS12 */ + 0x00030000 /* EMC_DLL_XFORM_DQS13 */ + 0x00030000 /* EMC_DLL_XFORM_DQS14 */ + 0x00030000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00060000 /* EMC_DLL_XFORM_DQ0 */ + 0x00060000 /* EMC_DLL_XFORM_DQ1 */ + 0x00060000 /* EMC_DLL_XFORM_DQ2 */ + 0x00060000 /* EMC_DLL_XFORM_DQ3 */ + 0x00006000 /* EMC_DLL_XFORM_DQ4 */ + 0x00006000 /* EMC_DLL_XFORM_DQ5 */ + 0x00006000 /* EMC_DLL_XFORM_DQ6 */ + 0x00006000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000096 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x0174000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000052a3 /* EMC_CFG_PIPE */ + 0x800012d7 /* EMC_DYN_SELF_REF_CONTROL */ + 0x00000009 /* EMC_QPOP */ >; }; @@ -1270,149 +1421,317 @@ nvidia,emc-zcal-interval = <0x00020000>; nvidia,emc-configuration = < - 0x00000012 - 0x00000065 - 0x00000000 - 0x0000000c - 0x00000004 - 0x00000005 - 0x00000008 - 0x00000002 - 0x0000000a - 0x00000004 - 0x00000004 - 0x00000002 - 0x00000002 - 0x00000000 - 0x00000003 - 0x00000003 - 0x00000005 - 0x00000002 - 0x00000000 - 0x00000001 - 0x00000008 - 0x00020000 - 0x00000003 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x0000000f - 0x00000010 - 0x00000012 - 0x00000bd1 - 0x00000000 - 0x000002f4 - 0x00000001 - 0x00000008 - 0x00000001 - 0x00000000 - 0x00000063 - 0x0000000f - 0x0000006b - 0x00000200 - 0x00000004 - 0x00000005 - 0x00000004 - 0x0000000d - 0x00000000 - 0x00000005 - 0x00000005 - 0x00000c11 - 0x00000000 - 0x00000000 - 0x00000000 - 0x104ab098 - 0x002c00a0 - 0x00008000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00070000 - 0x00070000 - 0x00000000 - 0x00070000 - 0x00070000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00048000 - 0x00048000 - 0x00048000 - 0x00048000 - 0x00004800 - 0x00004800 - 0x00004800 - 0x00004800 - 0x10000280 - 0x00000000 - 0x00111111 - 0x00000000 - 0x00000000 - 0x77ffc081 - 0x00000101 - 0x81f1f108 - 0x07070004 - 0x00000000 - 0x016eeeee - 0x51451420 - 0x00514514 - 0x00514514 - 0x51451400 - 0x0000003f - 0x000000c6 - 0x00000000 - 0x00000100 - 0x015b000c - 0x00000000 - 0x00000003 - 0x000052a3 - 0x8000188b - 0x00000009 + 0x00000012 /* EMC_RC */ + 0x00000065 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x0000000c /* EMC_RAS */ + 0x00000004 /* EMC_RP */ + 0x00000005 /* EMC_R2W */ + 0x00000008 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x0000000a /* EMC_W2P */ + 0x00000004 /* EMC_RD_RCD */ + 0x00000004 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000003 /* EMC_WDV */ + 0x00000003 /* EMC_WDV_MASK */ + 0x00000005 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000001 /* EMC_EINPUT */ + 0x00000008 /* EMC_EINPUT_DURATION */ + 0x00020000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000000 /* EMC_QRST */ + 0x0000000f /* EMC_QSAFE */ + 0x00000010 /* EMC_RDV */ + 0x00000012 /* EMC_RDV_MASK */ + 0x00000bd1 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000002f4 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000001 /* EMC_PDEX2WR */ + 0x00000008 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000063 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000006b /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x0000000d /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000c11 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00030000 /* EMC_DLL_XFORM_DQS0 */ + 0x00030000 /* EMC_DLL_XFORM_DQS1 */ + 0x00030000 /* EMC_DLL_XFORM_DQS2 */ + 0x00030000 /* EMC_DLL_XFORM_DQS3 */ + 0x00030000 /* EMC_DLL_XFORM_DQS4 */ + 0x00030000 /* EMC_DLL_XFORM_DQS5 */ + 0x00030000 /* EMC_DLL_XFORM_DQS6 */ + 0x00030000 /* EMC_DLL_XFORM_DQS7 */ + 0x00030000 /* EMC_DLL_XFORM_DQS8 */ + 0x00030000 /* EMC_DLL_XFORM_DQS9 */ + 0x00030000 /* EMC_DLL_XFORM_DQS10 */ + 0x00030000 /* EMC_DLL_XFORM_DQS11 */ + 0x00030000 /* EMC_DLL_XFORM_DQS12 */ + 0x00030000 /* EMC_DLL_XFORM_DQS13 */ + 0x00030000 /* EMC_DLL_XFORM_DQS14 */ + 0x00030000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00048000 /* EMC_DLL_XFORM_DQ0 */ + 0x00048000 /* EMC_DLL_XFORM_DQ1 */ + 0x00048000 /* EMC_DLL_XFORM_DQ2 */ + 0x00048000 /* EMC_DLL_XFORM_DQ3 */ + 0x00004800 /* EMC_DLL_XFORM_DQ4 */ + 0x00004800 /* EMC_DLL_XFORM_DQ5 */ + 0x00004800 /* EMC_DLL_XFORM_DQ6 */ + 0x00004800 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x000000c6 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x015b000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000052a3 /* EMC_CFG_PIPE */ + 0x8000188b /* EMC_DYN_SELF_REF_CONTROL */ + 0x00000009 /* EMC_QPOP */ + >; + }; + + timing-528000000 { + clock-frequency = <528000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000941>; + nvidia,emc-mrs-wait-cnt = <0x013a000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0123133d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000018 /* EMC_RC */ + 0x00000088 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000011 /* EMC_RAS */ + 0x00000006 /* EMC_RP */ + 0x00000006 /* EMC_R2W */ + 0x00000009 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x0000000d /* EMC_W2P */ + 0x00000006 /* EMC_RD_RCD */ + 0x00000006 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000003 /* EMC_WDV */ + 0x00000003 /* EMC_WDV_MASK */ + 0x00000007 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000002 /* EMC_EINPUT */ + 0x00000009 /* EMC_EINPUT_DURATION */ + 0x00040000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000001 /* EMC_QRST */ + 0x00000010 /* EMC_QSAFE */ + 0x00000013 /* EMC_RDV */ + 0x00000015 /* EMC_RDV_MASK */ + 0x00000fd6 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000003f5 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x0000000b /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000084 /* EMC_AR2PDEN */ + 0x00000012 /* EMC_RW2PDEN */ + 0x0000008f /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000013 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000006 /* EMC_TCLKSTABLE */ + 0x00000006 /* EMC_TCLKSTOP */ + 0x00001017 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0xe01200b1 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x0000000a /* EMC_DLL_XFORM_DQS0 */ + 0x0000000a /* EMC_DLL_XFORM_DQS1 */ + 0x0000000a /* EMC_DLL_XFORM_DQS2 */ + 0x0000000a /* EMC_DLL_XFORM_DQS3 */ + 0x0000000a /* EMC_DLL_XFORM_DQS4 */ + 0x0000000a /* EMC_DLL_XFORM_DQS5 */ + 0x0000000a /* EMC_DLL_XFORM_DQS6 */ + 0x0000000a /* EMC_DLL_XFORM_DQS7 */ + 0x0000000a /* EMC_DLL_XFORM_DQS8 */ + 0x0000000a /* EMC_DLL_XFORM_DQS9 */ + 0x0000000a /* EMC_DLL_XFORM_DQS10 */ + 0x0000000a /* EMC_DLL_XFORM_DQS11 */ + 0x0000000a /* EMC_DLL_XFORM_DQS12 */ + 0x0000000a /* EMC_DLL_XFORM_DQS13 */ + 0x0000000a /* EMC_DLL_XFORM_DQS14 */ + 0x0000000a /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000001 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000001 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS15 */ + 0x0000000e /* EMC_DLL_XFORM_DQ0 */ + 0x0000000e /* EMC_DLL_XFORM_DQ1 */ + 0x0000000e /* EMC_DLL_XFORM_DQ2 */ + 0x0000000e /* EMC_DLL_XFORM_DQ3 */ + 0x0000000e /* EMC_DLL_XFORM_DQ4 */ + 0x0000000e /* EMC_DLL_XFORM_DQ5 */ + 0x0000000e /* EMC_DLL_XFORM_DQ6 */ + 0x0000000e /* EMC_DLL_XFORM_DQ7 */ + 0x100002a0 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc085 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0606003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000000 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x013a000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000042a0 /* EMC_CFG_PIPE */ + 0x80002062 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000b /* EMC_QPOP */ >; }; @@ -1438,149 +1757,149 @@ nvidia,emc-zcal-interval = <0x00020000>; nvidia,emc-configuration = < - 0x0000001c - 0x0000009a - 0x00000000 - 0x00000013 - 0x00000007 - 0x00000007 - 0x0000000b - 0x00000003 - 0x00000010 - 0x00000007 - 0x00000007 - 0x00000002 - 0x00000002 - 0x00000000 - 0x00000005 - 0x00000005 - 0x0000000a - 0x00000002 - 0x00000000 - 0x00000003 - 0x0000000b - 0x00070000 - 0x00000003 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000002 - 0x00000012 - 0x00000016 - 0x00000018 - 0x00001208 - 0x00000000 - 0x00000482 - 0x00000002 - 0x0000000d - 0x00000001 - 0x00000000 - 0x00000096 - 0x00000015 - 0x000000a2 - 0x00000200 - 0x00000004 - 0x00000005 - 0x00000004 - 0x00000015 - 0x00000000 - 0x00000006 - 0x00000006 - 0x00001249 - 0x00000000 - 0x00000000 - 0x00000000 - 0x104ab098 - 0xe00e00b1 - 0x00008000 - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00048000 - 0x00048000 - 0x00000000 - 0x00048000 - 0x00048000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000004 - 0x00000004 - 0x00000002 - 0x00000005 - 0x00000006 - 0x00000003 - 0x00000006 - 0x00000005 - 0x00000004 - 0x00000004 - 0x00000002 - 0x00000005 - 0x00000006 - 0x00000003 - 0x00000006 - 0x00000005 - 0x0000000e - 0x0000000e - 0x0000000e - 0x0000000e - 0x0000000e - 0x0000000e - 0x0000000e - 0x0000000e - 0x100002a0 - 0x00000000 - 0x00111111 - 0x00000000 - 0x00000000 - 0x77ffc085 - 0x00000101 - 0x81f1f108 - 0x07070004 - 0x00000000 - 0x016eeeee - 0x51451420 - 0x00514514 - 0x00514514 - 0x51451400 - 0x0606003f - 0x00000000 - 0x00000000 - 0x00000100 - 0x0128000c - 0x00000000 - 0x00000003 - 0x000040a0 - 0x800024aa - 0x0000000e + 0x0000001c /* EMC_RC */ + 0x0000009a /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000013 /* EMC_RAS */ + 0x00000007 /* EMC_RP */ + 0x00000007 /* EMC_R2W */ + 0x0000000b /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x00000010 /* EMC_W2P */ + 0x00000007 /* EMC_RD_RCD */ + 0x00000007 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_WDV_MASK */ + 0x0000000a /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000003 /* EMC_EINPUT */ + 0x0000000b /* EMC_EINPUT_DURATION */ + 0x00070000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000002 /* EMC_QRST */ + 0x00000012 /* EMC_QSAFE */ + 0x00000016 /* EMC_RDV */ + 0x00000018 /* EMC_RDV_MASK */ + 0x00001208 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000482 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x0000000d /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000096 /* EMC_AR2PDEN */ + 0x00000015 /* EMC_RW2PDEN */ + 0x000000a2 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000015 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000006 /* EMC_TCLKSTABLE */ + 0x00000006 /* EMC_TCLKSTOP */ + 0x00001249 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0xe00e00b1 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x0000000a /* EMC_DLL_XFORM_DQS0 */ + 0x0000000a /* EMC_DLL_XFORM_DQS1 */ + 0x0000000a /* EMC_DLL_XFORM_DQS2 */ + 0x0000000a /* EMC_DLL_XFORM_DQS3 */ + 0x0000000a /* EMC_DLL_XFORM_DQS4 */ + 0x0000000a /* EMC_DLL_XFORM_DQS5 */ + 0x0000000a /* EMC_DLL_XFORM_DQS6 */ + 0x0000000a /* EMC_DLL_XFORM_DQS7 */ + 0x0000000a /* EMC_DLL_XFORM_DQS8 */ + 0x0000000a /* EMC_DLL_XFORM_DQS9 */ + 0x0000000a /* EMC_DLL_XFORM_DQS10 */ + 0x0000000a /* EMC_DLL_XFORM_DQS11 */ + 0x0000000a /* EMC_DLL_XFORM_DQS12 */ + 0x0000000a /* EMC_DLL_XFORM_DQS13 */ + 0x0000000a /* EMC_DLL_XFORM_DQS14 */ + 0x0000000a /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS15 */ + 0x0000000e /* EMC_DLL_XFORM_DQ0 */ + 0x0000000e /* EMC_DLL_XFORM_DQ1 */ + 0x0000000e /* EMC_DLL_XFORM_DQ2 */ + 0x0000000e /* EMC_DLL_XFORM_DQ3 */ + 0x0000000e /* EMC_DLL_XFORM_DQ4 */ + 0x0000000e /* EMC_DLL_XFORM_DQ5 */ + 0x0000000e /* EMC_DLL_XFORM_DQ6 */ + 0x0000000e /* EMC_DLL_XFORM_DQ7 */ + 0x100002a0 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc085 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0606003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000000 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x0128000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000040a0 /* EMC_CFG_PIPE */ + 0x800024aa /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000e /* EMC_QPOP */ >; }; @@ -1606,152 +1925,3855 @@ nvidia,emc-zcal-interval = <0x00020000>; nvidia,emc-configuration = < - 0x00000025 - 0x000000cc - 0x00000000 - 0x0000001a - 0x00000009 - 0x00000008 - 0x0000000d - 0x00000004 - 0x00000013 - 0x00000009 - 0x00000009 - 0x00000003 - 0x00000002 - 0x00000000 - 0x00000006 - 0x00000006 - 0x0000000b - 0x00000002 - 0x00000000 - 0x00000002 - 0x0000000d - 0x00080000 - 0x00000004 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000001 - 0x00000014 - 0x00000018 - 0x0000001a - 0x000017e2 - 0x00000000 - 0x000005f8 - 0x00000003 - 0x00000011 - 0x00000001 - 0x00000000 - 0x000000c6 - 0x00000018 - 0x000000d6 - 0x00000200 - 0x00000005 - 0x00000006 - 0x00000005 - 0x0000001d - 0x00000000 - 0x00000008 - 0x00000008 - 0x00001822 - 0x00000000 - 0x80000005 - 0x00000000 - 0x104ab198 - 0xe00700b1 - 0x00008000 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00034000 - 0x00034000 - 0x00000000 - 0x00034000 - 0x00034000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000008 - 0x00000008 - 0x00000005 - 0x00000009 - 0x00000009 - 0x00000007 - 0x00000009 - 0x00000008 - 0x00000008 - 0x00000008 - 0x00000005 - 0x00000009 - 0x00000009 - 0x00000007 - 0x00000009 - 0x00000008 - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x100002a0 - 0x00000000 - 0x00111111 - 0x00000000 - 0x00000000 - 0x77ffc085 - 0x00000101 - 0x81f1f108 - 0x07070004 - 0x00000000 - 0x016eeeee - 0x61861820 - 0x00514514 - 0x00514514 - 0x61861800 - 0x0606003f - 0x00000000 - 0x00000000 - 0x00000100 - 0x00f8000c - 0x00000007 - 0x00000004 - 0x00004080 - 0x80003012 - 0x0000000f + 0x00000025 /* EMC_RC */ + 0x000000cc /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x0000001a /* EMC_RAS */ + 0x00000009 /* EMC_RP */ + 0x00000008 /* EMC_R2W */ + 0x0000000d /* EMC_W2R */ + 0x00000004 /* EMC_R2P */ + 0x00000013 /* EMC_W2P */ + 0x00000009 /* EMC_RD_RCD */ + 0x00000009 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x0000000b /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000002 /* EMC_EINPUT */ + 0x0000000d /* EMC_EINPUT_DURATION */ + 0x00080000 /* EMC_PUTERM_EXTRA */ + 0x00000004 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000001 /* EMC_QRST */ + 0x00000014 /* EMC_QSAFE */ + 0x00000018 /* EMC_RDV */ + 0x0000001a /* EMC_RDV_MASK */ + 0x000017e2 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000005f8 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000003 /* EMC_PDEX2WR */ + 0x00000011 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x000000c6 /* EMC_AR2PDEN */ + 0x00000018 /* EMC_RW2PDEN */ + 0x000000d6 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000005 /* EMC_TCKE */ + 0x00000006 /* EMC_TCKESR */ + 0x00000005 /* EMC_TPD */ + 0x0000001d /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000008 /* EMC_TCLKSTABLE */ + 0x00000008 /* EMC_TCLKSTOP */ + 0x00001822 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x80000005 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab198 /* EMC_FBIO_CFG5 */ + 0xe00700b1 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00000005 /* EMC_DLL_XFORM_DQS0 */ + 0x00000005 /* EMC_DLL_XFORM_DQS1 */ + 0x00000005 /* EMC_DLL_XFORM_DQS2 */ + 0x00000005 /* EMC_DLL_XFORM_DQS3 */ + 0x00000005 /* EMC_DLL_XFORM_DQS4 */ + 0x00000005 /* EMC_DLL_XFORM_DQS5 */ + 0x00000005 /* EMC_DLL_XFORM_DQS6 */ + 0x00000005 /* EMC_DLL_XFORM_DQS7 */ + 0x00000005 /* EMC_DLL_XFORM_DQS8 */ + 0x00000005 /* EMC_DLL_XFORM_DQS9 */ + 0x00000005 /* EMC_DLL_XFORM_DQS10 */ + 0x00000005 /* EMC_DLL_XFORM_DQS11 */ + 0x00000005 /* EMC_DLL_XFORM_DQS12 */ + 0x00000005 /* EMC_DLL_XFORM_DQS13 */ + 0x00000005 /* EMC_DLL_XFORM_DQS14 */ + 0x00000005 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00034000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00034000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00034000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00034000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000007 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000007 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS15 */ + 0x0000000a /* EMC_DLL_XFORM_DQ0 */ + 0x0000000a /* EMC_DLL_XFORM_DQ1 */ + 0x0000000a /* EMC_DLL_XFORM_DQ2 */ + 0x0000000a /* EMC_DLL_XFORM_DQ3 */ + 0x0000000a /* EMC_DLL_XFORM_DQ4 */ + 0x0000000a /* EMC_DLL_XFORM_DQ5 */ + 0x0000000a /* EMC_DLL_XFORM_DQ6 */ + 0x0000000a /* EMC_DLL_XFORM_DQ7 */ + 0x100002a0 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc085 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x61861820 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x61861800 /* EMC_XM2DQSPADCTRL6 */ + 0x0606003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000000 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x00f8000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000007 /* EMC_CTT */ + 0x00000004 /* EMC_CTT_DURATION */ + 0x00004080 /* EMC_CFG_PIPE */ + 0x80003012 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000f /* EMC_QPOP */ + >; + }; + }; + + emc-timings-4 { + nvidia,ram-code = <4>; + + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100003>; + nvidia,emc-mode-2 = <0x00200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000000 /* EMC_RC */ + 0x00000004 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000000 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000060 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000018 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000005 /* EMC_TXSR */ + 0x00000005 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000000 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000064 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00080000 /* EMC_DLL_XFORM_DQ0 */ + 0x00080000 /* EMC_DLL_XFORM_DQ1 */ + 0x00080000 /* EMC_DLL_XFORM_DQ2 */ + 0x00080000 /* EMC_DLL_XFORM_DQ3 */ + 0x00008000 /* EMC_DLL_XFORM_DQ4 */ + 0x00008000 /* EMC_DLL_XFORM_DQ5 */ + 0x00008000 /* EMC_DLL_XFORM_DQ6 */ + 0x00008000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000007 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000e000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x800001c5 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-20400000 { + clock-frequency = <20400000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100003>; + nvidia,emc-mode-2 = <0x00200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000000 /* EMC_RC */ + 0x00000007 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000000 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x0000009a /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000026 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000008 /* EMC_TXSR */ + 0x00000008 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000000 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x000000a0 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00080000 /* EMC_DLL_XFORM_DQ0 */ + 0x00080000 /* EMC_DLL_XFORM_DQ1 */ + 0x00080000 /* EMC_DLL_XFORM_DQ2 */ + 0x00080000 /* EMC_DLL_XFORM_DQ3 */ + 0x00008000 /* EMC_DLL_XFORM_DQ4 */ + 0x00008000 /* EMC_DLL_XFORM_DQ5 */ + 0x00008000 /* EMC_DLL_XFORM_DQ6 */ + 0x00008000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x0000000b /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000e000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x8000023a /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-40800000 { + clock-frequency = <40800000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100003>; + nvidia,emc-mode-2 = <0x00200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000001 /* EMC_RC */ + 0x0000000e /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000001 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000134 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x0000004d /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x0000000c /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000000f /* EMC_TXSR */ + 0x0000000f /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000000 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000013f /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00080000 /* EMC_DLL_XFORM_DQ0 */ + 0x00080000 /* EMC_DLL_XFORM_DQ1 */ + 0x00080000 /* EMC_DLL_XFORM_DQ2 */ + 0x00080000 /* EMC_DLL_XFORM_DQ3 */ + 0x00008000 /* EMC_DLL_XFORM_DQ4 */ + 0x00008000 /* EMC_DLL_XFORM_DQ5 */ + 0x00008000 /* EMC_DLL_XFORM_DQ6 */ + 0x00008000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000015 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000e000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x80000370 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-68000000 { + clock-frequency = <68000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100003>; + nvidia,emc-mode-2 = <0x00200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000003 /* EMC_RC */ + 0x00000017 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000002 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000202 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000080 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000015 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000019 /* EMC_TXSR */ + 0x00000019 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000001 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000213 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00080000 /* EMC_DLL_XFORM_DQ0 */ + 0x00080000 /* EMC_DLL_XFORM_DQ1 */ + 0x00080000 /* EMC_DLL_XFORM_DQ2 */ + 0x00080000 /* EMC_DLL_XFORM_DQ3 */ + 0x00008000 /* EMC_DLL_XFORM_DQ4 */ + 0x00008000 /* EMC_DLL_XFORM_DQ5 */ + 0x00008000 /* EMC_DLL_XFORM_DQ6 */ + 0x00008000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000022 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000e000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x8000050e /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100003>; + nvidia,emc-mode-2 = <0x00200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000004 /* EMC_RC */ + 0x00000023 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000003 /* EMC_RAS */ + 0x00000001 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000001 /* EMC_RD_RCD */ + 0x00000001 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000304 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000000c1 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000021 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000025 /* EMC_TXSR */ + 0x00000025 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000003 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000031c /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00080000 /* EMC_DLL_XFORM_DQ0 */ + 0x00080000 /* EMC_DLL_XFORM_DQ1 */ + 0x00080000 /* EMC_DLL_XFORM_DQ2 */ + 0x00080000 /* EMC_DLL_XFORM_DQ3 */ + 0x00008000 /* EMC_DLL_XFORM_DQ4 */ + 0x00008000 /* EMC_DLL_XFORM_DQ5 */ + 0x00008000 /* EMC_DLL_XFORM_DQ6 */ + 0x00008000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000033 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000e000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x80000713 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x0000088d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100003>; + nvidia,emc-mode-2 = <0x00200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000009 /* EMC_RC */ + 0x00000047 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000006 /* EMC_RAS */ + 0x00000002 /* EMC_RP */ + 0x00000005 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000002 /* EMC_RD_RCD */ + 0x00000002 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000004 /* EMC_EINPUT */ + 0x00000006 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000003 /* EMC_QRST */ + 0x0000000d /* EMC_QSAFE */ + 0x0000000f /* EMC_RDV */ + 0x00000011 /* EMC_RDV_MASK */ + 0x00000607 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000044 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000004a /* EMC_TXSR */ + 0x0000004a /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000007 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000638 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00090000 /* EMC_DLL_XFORM_DQ0 */ + 0x00090000 /* EMC_DLL_XFORM_DQ1 */ + 0x00094000 /* EMC_DLL_XFORM_DQ2 */ + 0x00094000 /* EMC_DLL_XFORM_DQ3 */ + 0x00009400 /* EMC_DLL_XFORM_DQ4 */ + 0x00009000 /* EMC_DLL_XFORM_DQ5 */ + 0x00009000 /* EMC_DLL_XFORM_DQ6 */ + 0x00009000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000066 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x000e000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000d2b3 /* EMC_CFG_PIPE */ + 0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-300000000 { + clock-frequency = <300000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73340000>; + nvidia,emc-cfg-2 = <0x000008d5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100002>; + nvidia,emc-mode-2 = <0x00200000>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00000321>; + nvidia,emc-mrs-wait-cnt = <0x0117000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x01231339>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x0000000d /* EMC_RC */ + 0x00000067 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000009 /* EMC_RAS */ + 0x00000003 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x00000008 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x00000009 /* EMC_W2P */ + 0x00000003 /* EMC_RD_RCD */ + 0x00000003 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000003 /* EMC_WDV */ + 0x00000003 /* EMC_WDV_MASK */ + 0x00000005 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000002 /* EMC_EINPUT */ + 0x00000007 /* EMC_EINPUT_DURATION */ + 0x00020000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000001 /* EMC_QRST */ + 0x0000000e /* EMC_QSAFE */ + 0x00000010 /* EMC_RDV */ + 0x00000012 /* EMC_RDV_MASK */ + 0x000008e4 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000239 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000001 /* EMC_PDEX2WR */ + 0x00000008 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000065 /* EMC_AR2PDEN */ + 0x0000000e /* EMC_RW2PDEN */ + 0x0000006c /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000009 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000924 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00030000 /* EMC_DLL_XFORM_DQS0 */ + 0x00030000 /* EMC_DLL_XFORM_DQS1 */ + 0x00030000 /* EMC_DLL_XFORM_DQS2 */ + 0x00030000 /* EMC_DLL_XFORM_DQS3 */ + 0x00030000 /* EMC_DLL_XFORM_DQS4 */ + 0x00030000 /* EMC_DLL_XFORM_DQS5 */ + 0x00030000 /* EMC_DLL_XFORM_DQS6 */ + 0x00030000 /* EMC_DLL_XFORM_DQS7 */ + 0x00030000 /* EMC_DLL_XFORM_DQS8 */ + 0x00030000 /* EMC_DLL_XFORM_DQS9 */ + 0x00030000 /* EMC_DLL_XFORM_DQS10 */ + 0x00030000 /* EMC_DLL_XFORM_DQS11 */ + 0x00030000 /* EMC_DLL_XFORM_DQS12 */ + 0x00030000 /* EMC_DLL_XFORM_DQS13 */ + 0x00030000 /* EMC_DLL_XFORM_DQS14 */ + 0x00030000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00060000 /* EMC_DLL_XFORM_DQ0 */ + 0x00060000 /* EMC_DLL_XFORM_DQ1 */ + 0x00060000 /* EMC_DLL_XFORM_DQ2 */ + 0x00060000 /* EMC_DLL_XFORM_DQ3 */ + 0x00006000 /* EMC_DLL_XFORM_DQ4 */ + 0x00006000 /* EMC_DLL_XFORM_DQ5 */ + 0x00006000 /* EMC_DLL_XFORM_DQ6 */ + 0x00006000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000096 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x0117000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000052a3 /* EMC_CFG_PIPE */ + 0x800012d7 /* EMC_DYN_SELF_REF_CONTROL */ + 0x00000009 /* EMC_QPOP */ + >; + }; + + timing-396000000 { + clock-frequency = <396000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73340000>; + nvidia,emc-cfg-2 = <0x00000895>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100002>; + nvidia,emc-mode-2 = <0x00200000>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00000521>; + nvidia,emc-mrs-wait-cnt = <0x00f5000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x01231339>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000011 /* EMC_RC */ + 0x00000089 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x0000000c /* EMC_RAS */ + 0x00000004 /* EMC_RP */ + 0x00000005 /* EMC_R2W */ + 0x00000008 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x0000000a /* EMC_W2P */ + 0x00000004 /* EMC_RD_RCD */ + 0x00000004 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000003 /* EMC_WDV */ + 0x00000003 /* EMC_WDV_MASK */ + 0x00000005 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000001 /* EMC_EINPUT */ + 0x00000008 /* EMC_EINPUT_DURATION */ + 0x00020000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000000 /* EMC_QRST */ + 0x0000000f /* EMC_QSAFE */ + 0x00000010 /* EMC_RDV */ + 0x00000012 /* EMC_RDV_MASK */ + 0x00000bd1 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000002f4 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000001 /* EMC_PDEX2WR */ + 0x00000008 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000087 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000008f /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x0000000d /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000c11 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00030000 /* EMC_DLL_XFORM_DQS0 */ + 0x00030000 /* EMC_DLL_XFORM_DQS1 */ + 0x00030000 /* EMC_DLL_XFORM_DQS2 */ + 0x00030000 /* EMC_DLL_XFORM_DQS3 */ + 0x00030000 /* EMC_DLL_XFORM_DQS4 */ + 0x00030000 /* EMC_DLL_XFORM_DQS5 */ + 0x00030000 /* EMC_DLL_XFORM_DQS6 */ + 0x00030000 /* EMC_DLL_XFORM_DQS7 */ + 0x00030000 /* EMC_DLL_XFORM_DQS8 */ + 0x00030000 /* EMC_DLL_XFORM_DQS9 */ + 0x00030000 /* EMC_DLL_XFORM_DQS10 */ + 0x00030000 /* EMC_DLL_XFORM_DQS11 */ + 0x00030000 /* EMC_DLL_XFORM_DQS12 */ + 0x00030000 /* EMC_DLL_XFORM_DQS13 */ + 0x00030000 /* EMC_DLL_XFORM_DQS14 */ + 0x00030000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00048000 /* EMC_DLL_XFORM_DQ0 */ + 0x00048000 /* EMC_DLL_XFORM_DQ1 */ + 0x00048000 /* EMC_DLL_XFORM_DQ2 */ + 0x00048000 /* EMC_DLL_XFORM_DQ3 */ + 0x00004800 /* EMC_DLL_XFORM_DQ4 */ + 0x00004800 /* EMC_DLL_XFORM_DQ5 */ + 0x00004800 /* EMC_DLL_XFORM_DQ6 */ + 0x00004800 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x000000c6 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x00f5000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000052a3 /* EMC_CFG_PIPE */ + 0x8000188b /* EMC_DYN_SELF_REF_CONTROL */ + 0x00000009 /* EMC_QPOP */ + >; + }; + + timing-528000000 { + clock-frequency = <528000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100002>; + nvidia,emc-mode-2 = <0x00200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00000941>; + nvidia,emc-mrs-wait-cnt = <0x00c8000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0123133d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000018 /* EMC_RC */ + 0x000000b7 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000010 /* EMC_RAS */ + 0x00000006 /* EMC_RP */ + 0x00000006 /* EMC_R2W */ + 0x00000009 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x0000000d /* EMC_W2P */ + 0x00000006 /* EMC_RD_RCD */ + 0x00000006 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000003 /* EMC_WDV */ + 0x00000003 /* EMC_WDV_MASK */ + 0x00000007 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000002 /* EMC_EINPUT */ + 0x00000009 /* EMC_EINPUT_DURATION */ + 0x00040000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000001 /* EMC_QRST */ + 0x00000010 /* EMC_QSAFE */ + 0x00000013 /* EMC_RDV */ + 0x00000015 /* EMC_RDV_MASK */ + 0x00000fd6 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000003f5 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x0000000b /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x000000b4 /* EMC_AR2PDEN */ + 0x00000012 /* EMC_RW2PDEN */ + 0x000000bf /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000013 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000006 /* EMC_TCLKSTABLE */ + 0x00000006 /* EMC_TCLKSTOP */ + 0x00001017 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0xe01200b1 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x0000000a /* EMC_DLL_XFORM_DQS0 */ + 0x0000000a /* EMC_DLL_XFORM_DQS1 */ + 0x0000000a /* EMC_DLL_XFORM_DQS2 */ + 0x0000000a /* EMC_DLL_XFORM_DQS3 */ + 0x0000000a /* EMC_DLL_XFORM_DQS4 */ + 0x0000000a /* EMC_DLL_XFORM_DQS5 */ + 0x0000000a /* EMC_DLL_XFORM_DQS6 */ + 0x0000000a /* EMC_DLL_XFORM_DQS7 */ + 0x0000000a /* EMC_DLL_XFORM_DQS8 */ + 0x0000000a /* EMC_DLL_XFORM_DQS9 */ + 0x0000000a /* EMC_DLL_XFORM_DQS10 */ + 0x0000000a /* EMC_DLL_XFORM_DQS11 */ + 0x0000000a /* EMC_DLL_XFORM_DQS12 */ + 0x0000000a /* EMC_DLL_XFORM_DQS13 */ + 0x0000000a /* EMC_DLL_XFORM_DQS14 */ + 0x0000000a /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000001 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000001 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS15 */ + 0x0000000e /* EMC_DLL_XFORM_DQ0 */ + 0x0000000e /* EMC_DLL_XFORM_DQ1 */ + 0x0000000e /* EMC_DLL_XFORM_DQ2 */ + 0x0000000e /* EMC_DLL_XFORM_DQ3 */ + 0x0000000e /* EMC_DLL_XFORM_DQ4 */ + 0x0000000e /* EMC_DLL_XFORM_DQ5 */ + 0x0000000e /* EMC_DLL_XFORM_DQ6 */ + 0x0000000e /* EMC_DLL_XFORM_DQ7 */ + 0x100002a0 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc085 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0606003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000000 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x00c8000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000042a0 /* EMC_CFG_PIPE */ + 0x80002062 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000b /* EMC_QPOP */ + >; + }; + + timing-600000000 { + clock-frequency = <600000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100002>; + nvidia,emc-mode-2 = <0x00200010>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00000b61>; + nvidia,emc-mrs-wait-cnt = <0x00b0000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0121113d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x0000001b /* EMC_RC */ + 0x000000d0 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000013 /* EMC_RAS */ + 0x00000007 /* EMC_RP */ + 0x00000007 /* EMC_R2W */ + 0x0000000b /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x00000010 /* EMC_W2P */ + 0x00000007 /* EMC_RD_RCD */ + 0x00000007 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_WDV_MASK */ + 0x0000000a /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000003 /* EMC_EINPUT */ + 0x0000000b /* EMC_EINPUT_DURATION */ + 0x00070000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000002 /* EMC_QRST */ + 0x00000012 /* EMC_QSAFE */ + 0x00000016 /* EMC_RDV */ + 0x00000018 /* EMC_RDV_MASK */ + 0x00001208 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000482 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x0000000d /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x000000cc /* EMC_AR2PDEN */ + 0x00000015 /* EMC_RW2PDEN */ + 0x000000d8 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000015 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000006 /* EMC_TCLKSTABLE */ + 0x00000006 /* EMC_TCLKSTOP */ + 0x00001249 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0xe00e00b1 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x0000000a /* EMC_DLL_XFORM_DQS0 */ + 0x0000000a /* EMC_DLL_XFORM_DQS1 */ + 0x0000000a /* EMC_DLL_XFORM_DQS2 */ + 0x0000000a /* EMC_DLL_XFORM_DQS3 */ + 0x0000000a /* EMC_DLL_XFORM_DQS4 */ + 0x0000000a /* EMC_DLL_XFORM_DQS5 */ + 0x0000000a /* EMC_DLL_XFORM_DQS6 */ + 0x0000000a /* EMC_DLL_XFORM_DQS7 */ + 0x0000000a /* EMC_DLL_XFORM_DQS8 */ + 0x0000000a /* EMC_DLL_XFORM_DQS9 */ + 0x0000000a /* EMC_DLL_XFORM_DQS10 */ + 0x0000000a /* EMC_DLL_XFORM_DQS11 */ + 0x0000000a /* EMC_DLL_XFORM_DQS12 */ + 0x0000000a /* EMC_DLL_XFORM_DQS13 */ + 0x0000000a /* EMC_DLL_XFORM_DQS14 */ + 0x0000000a /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS15 */ + 0x0000000e /* EMC_DLL_XFORM_DQ0 */ + 0x0000000e /* EMC_DLL_XFORM_DQ1 */ + 0x0000000e /* EMC_DLL_XFORM_DQ2 */ + 0x0000000e /* EMC_DLL_XFORM_DQ3 */ + 0x0000000e /* EMC_DLL_XFORM_DQ4 */ + 0x0000000e /* EMC_DLL_XFORM_DQ5 */ + 0x0000000e /* EMC_DLL_XFORM_DQ6 */ + 0x0000000e /* EMC_DLL_XFORM_DQ7 */ + 0x100002a0 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc085 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0606003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000000 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x00b0000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000040a0 /* EMC_CFG_PIPE */ + 0x800024aa /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000e /* EMC_QPOP */ + >; + }; + + timing-792000000 { + clock-frequency = <792000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0080089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100002>; + nvidia,emc-mode-2 = <0x00200418>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00000d71>; + nvidia,emc-mrs-wait-cnt = <0x006f000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040000>; + nvidia,emc-xm2dqspadctrl2 = <0x0120113d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000024 /* EMC_RC */ + 0x00000114 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000019 /* EMC_RAS */ + 0x0000000a /* EMC_RP */ + 0x00000008 /* EMC_R2W */ + 0x0000000d /* EMC_W2R */ + 0x00000004 /* EMC_R2P */ + 0x00000013 /* EMC_W2P */ + 0x0000000a /* EMC_RD_RCD */ + 0x0000000a /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x0000000b /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000002 /* EMC_EINPUT */ + 0x0000000d /* EMC_EINPUT_DURATION */ + 0x00080000 /* EMC_PUTERM_EXTRA */ + 0x00000004 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000001 /* EMC_QRST */ + 0x00000014 /* EMC_QSAFE */ + 0x00000018 /* EMC_RDV */ + 0x0000001a /* EMC_RDV_MASK */ + 0x000017e2 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000005f8 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000003 /* EMC_PDEX2WR */ + 0x00000011 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x0000010d /* EMC_AR2PDEN */ + 0x00000018 /* EMC_RW2PDEN */ + 0x0000011e /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000005 /* EMC_TCKE */ + 0x00000006 /* EMC_TCKESR */ + 0x00000005 /* EMC_TPD */ + 0x0000001d /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000008 /* EMC_TCLKSTABLE */ + 0x00000008 /* EMC_TCLKSTOP */ + 0x00001822 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x80000005 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab198 /* EMC_FBIO_CFG5 */ + 0xe00700b1 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x007fc007 /* EMC_DLL_XFORM_DQS0 */ + 0x007fc008 /* EMC_DLL_XFORM_DQS1 */ + 0x007f400c /* EMC_DLL_XFORM_DQS2 */ + 0x007fc007 /* EMC_DLL_XFORM_DQS3 */ + 0x007f4006 /* EMC_DLL_XFORM_DQS4 */ + 0x007f8004 /* EMC_DLL_XFORM_DQS5 */ + 0x007f8005 /* EMC_DLL_XFORM_DQS6 */ + 0x007f8004 /* EMC_DLL_XFORM_DQS7 */ + 0x007fc007 /* EMC_DLL_XFORM_DQS8 */ + 0x007fc008 /* EMC_DLL_XFORM_DQS9 */ + 0x007f400c /* EMC_DLL_XFORM_DQS10 */ + 0x007fc007 /* EMC_DLL_XFORM_DQS11 */ + 0x007f4006 /* EMC_DLL_XFORM_DQS12 */ + 0x007f8004 /* EMC_DLL_XFORM_DQS13 */ + 0x007f8005 /* EMC_DLL_XFORM_DQS14 */ + 0x007f8004 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00034000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00034000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00034000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00034000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000007 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000007 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS15 */ + 0x0000000e /* EMC_DLL_XFORM_DQ0 */ + 0x0000000e /* EMC_DLL_XFORM_DQ1 */ + 0x0000000e /* EMC_DLL_XFORM_DQ2 */ + 0x0000000e /* EMC_DLL_XFORM_DQ3 */ + 0x0000000e /* EMC_DLL_XFORM_DQ4 */ + 0x0000000e /* EMC_DLL_XFORM_DQ5 */ + 0x0000000e /* EMC_DLL_XFORM_DQ6 */ + 0x0000000e /* EMC_DLL_XFORM_DQ7 */ + 0x100002a0 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc085 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x61861820 /* EMC_XM2DQSPADCTRL3 */ + 0x00492492 /* EMC_XM2DQSPADCTRL4 */ + 0x00492492 /* EMC_XM2DQSPADCTRL5 */ + 0x61861800 /* EMC_XM2DQSPADCTRL6 */ + 0x0606003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000000 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x006f000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000007 /* EMC_CTT */ + 0x00000004 /* EMC_CTT_DURATION */ + 0x00004080 /* EMC_CFG_PIPE */ + 0x80003012 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000f /* EMC_QPOP */ + >; + }; + }; + + emc-timings-6 { + nvidia,ram-code = <6>; + + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000000 /* EMC_RC */ + 0x00000003 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000000 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000060 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000018 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000005 /* EMC_TXSR */ + 0x00000005 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000000 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000064 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000007 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x800001c5 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-20400000 { + clock-frequency = <20400000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000000 /* EMC_RC */ + 0x00000005 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000000 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x0000009a /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000026 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000006 /* EMC_TXSR */ + 0x00000006 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000000 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x000000a0 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x0000000b /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x8000023a /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-40800000 { + clock-frequency = <40800000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000001 /* EMC_RC */ + 0x0000000a /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000001 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000134 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x0000004d /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000008 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000000c /* EMC_TXSR */ + 0x0000000c /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000000 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000013f /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000015 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x80000370 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-68000000 { + clock-frequency = <68000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000003 /* EMC_RC */ + 0x00000011 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000002 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000202 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000080 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x0000000f /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000013 /* EMC_TXSR */ + 0x00000013 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000001 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000213 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000022 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x8000050e /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000004 /* EMC_RC */ + 0x0000001a /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000003 /* EMC_RAS */ + 0x00000001 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000001 /* EMC_RD_RCD */ + 0x00000001 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000304 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000000c1 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000018 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000001c /* EMC_TXSR */ + 0x0000001c /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000003 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000031c /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000033 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x80000713 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x0000088d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000009 /* EMC_RC */ + 0x00000035 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000007 /* EMC_RAS */ + 0x00000002 /* EMC_RP */ + 0x00000005 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000002 /* EMC_RD_RCD */ + 0x00000002 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000004 /* EMC_EINPUT */ + 0x00000006 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000003 /* EMC_QRST */ + 0x0000000d /* EMC_QSAFE */ + 0x0000000f /* EMC_RDV */ + 0x00000011 /* EMC_RDV_MASK */ + 0x00000607 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000032 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000038 /* EMC_TXSR */ + 0x00000038 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000007 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000638 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00090000 /* EMC_DLL_XFORM_DQ0 */ + 0x00090000 /* EMC_DLL_XFORM_DQ1 */ + 0x00094000 /* EMC_DLL_XFORM_DQ2 */ + 0x00094000 /* EMC_DLL_XFORM_DQ3 */ + 0x00009400 /* EMC_DLL_XFORM_DQ4 */ + 0x00009000 /* EMC_DLL_XFORM_DQ5 */ + 0x00009000 /* EMC_DLL_XFORM_DQ6 */ + 0x00009000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000066 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000d2b3 /* EMC_CFG_PIPE */ + 0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-300000000 { + clock-frequency = <300000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73340000>; + nvidia,emc-cfg-2 = <0x000008d5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200000>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000321>; + nvidia,emc-mrs-wait-cnt = <0x0174000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x01231339>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x0000000d /* EMC_RC */ + 0x0000004c /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000009 /* EMC_RAS */ + 0x00000003 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x00000008 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x00000009 /* EMC_W2P */ + 0x00000003 /* EMC_RD_RCD */ + 0x00000003 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000003 /* EMC_WDV */ + 0x00000003 /* EMC_WDV_MASK */ + 0x00000005 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000002 /* EMC_EINPUT */ + 0x00000007 /* EMC_EINPUT_DURATION */ + 0x00020000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000001 /* EMC_QRST */ + 0x0000000e /* EMC_QSAFE */ + 0x00000010 /* EMC_RDV */ + 0x00000012 /* EMC_RDV_MASK */ + 0x000008e4 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000239 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000001 /* EMC_PDEX2WR */ + 0x00000008 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x0000004a /* EMC_AR2PDEN */ + 0x0000000e /* EMC_RW2PDEN */ + 0x00000051 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000009 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000924 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00030000 /* EMC_DLL_XFORM_DQS0 */ + 0x00030000 /* EMC_DLL_XFORM_DQS1 */ + 0x00030000 /* EMC_DLL_XFORM_DQS2 */ + 0x00030000 /* EMC_DLL_XFORM_DQS3 */ + 0x00030000 /* EMC_DLL_XFORM_DQS4 */ + 0x00030000 /* EMC_DLL_XFORM_DQS5 */ + 0x00030000 /* EMC_DLL_XFORM_DQS6 */ + 0x00030000 /* EMC_DLL_XFORM_DQS7 */ + 0x00030000 /* EMC_DLL_XFORM_DQS8 */ + 0x00030000 /* EMC_DLL_XFORM_DQS9 */ + 0x00030000 /* EMC_DLL_XFORM_DQS10 */ + 0x00030000 /* EMC_DLL_XFORM_DQS11 */ + 0x00030000 /* EMC_DLL_XFORM_DQS12 */ + 0x00030000 /* EMC_DLL_XFORM_DQS13 */ + 0x00030000 /* EMC_DLL_XFORM_DQS14 */ + 0x00030000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00060000 /* EMC_DLL_XFORM_DQ0 */ + 0x00060000 /* EMC_DLL_XFORM_DQ1 */ + 0x00060000 /* EMC_DLL_XFORM_DQ2 */ + 0x00060000 /* EMC_DLL_XFORM_DQ3 */ + 0x00006000 /* EMC_DLL_XFORM_DQ4 */ + 0x00006000 /* EMC_DLL_XFORM_DQ5 */ + 0x00006000 /* EMC_DLL_XFORM_DQ6 */ + 0x00006000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000096 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x0174000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000052a3 /* EMC_CFG_PIPE */ + 0x800012d7 /* EMC_DYN_SELF_REF_CONTROL */ + 0x00000009 /* EMC_QPOP */ + >; + }; + + timing-396000000 { + clock-frequency = <396000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73340000>; + nvidia,emc-cfg-2 = <0x00000895>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200000>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000521>; + nvidia,emc-mrs-wait-cnt = <0x015b000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x01231339>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000012 /* EMC_RC */ + 0x00000065 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x0000000c /* EMC_RAS */ + 0x00000004 /* EMC_RP */ + 0x00000005 /* EMC_R2W */ + 0x00000008 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x0000000a /* EMC_W2P */ + 0x00000004 /* EMC_RD_RCD */ + 0x00000004 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000003 /* EMC_WDV */ + 0x00000003 /* EMC_WDV_MASK */ + 0x00000005 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000001 /* EMC_EINPUT */ + 0x00000008 /* EMC_EINPUT_DURATION */ + 0x00020000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000000 /* EMC_QRST */ + 0x0000000f /* EMC_QSAFE */ + 0x00000010 /* EMC_RDV */ + 0x00000012 /* EMC_RDV_MASK */ + 0x00000bd1 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000002f4 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000001 /* EMC_PDEX2WR */ + 0x00000008 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000063 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000006b /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x0000000d /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000c11 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00030000 /* EMC_DLL_XFORM_DQS0 */ + 0x00030000 /* EMC_DLL_XFORM_DQS1 */ + 0x00030000 /* EMC_DLL_XFORM_DQS2 */ + 0x00030000 /* EMC_DLL_XFORM_DQS3 */ + 0x00030000 /* EMC_DLL_XFORM_DQS4 */ + 0x00030000 /* EMC_DLL_XFORM_DQS5 */ + 0x00030000 /* EMC_DLL_XFORM_DQS6 */ + 0x00030000 /* EMC_DLL_XFORM_DQS7 */ + 0x00030000 /* EMC_DLL_XFORM_DQS8 */ + 0x00030000 /* EMC_DLL_XFORM_DQS9 */ + 0x00030000 /* EMC_DLL_XFORM_DQS10 */ + 0x00030000 /* EMC_DLL_XFORM_DQS11 */ + 0x00030000 /* EMC_DLL_XFORM_DQS12 */ + 0x00030000 /* EMC_DLL_XFORM_DQS13 */ + 0x00030000 /* EMC_DLL_XFORM_DQS14 */ + 0x00030000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00048000 /* EMC_DLL_XFORM_DQ0 */ + 0x00048000 /* EMC_DLL_XFORM_DQ1 */ + 0x00048000 /* EMC_DLL_XFORM_DQ2 */ + 0x00048000 /* EMC_DLL_XFORM_DQ3 */ + 0x00004800 /* EMC_DLL_XFORM_DQ4 */ + 0x00004800 /* EMC_DLL_XFORM_DQ5 */ + 0x00004800 /* EMC_DLL_XFORM_DQ6 */ + 0x00004800 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x000000c6 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x015b000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000052a3 /* EMC_CFG_PIPE */ + 0x8000188b /* EMC_DYN_SELF_REF_CONTROL */ + 0x00000009 /* EMC_QPOP */ + >; + }; + + timing-528000000 { + clock-frequency = <528000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000941>; + nvidia,emc-mrs-wait-cnt = <0x013a000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0123133d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000018 /* EMC_RC */ + 0x00000088 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000011 /* EMC_RAS */ + 0x00000006 /* EMC_RP */ + 0x00000006 /* EMC_R2W */ + 0x00000009 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x0000000d /* EMC_W2P */ + 0x00000006 /* EMC_RD_RCD */ + 0x00000006 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000003 /* EMC_WDV */ + 0x00000003 /* EMC_WDV_MASK */ + 0x00000007 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000002 /* EMC_EINPUT */ + 0x00000009 /* EMC_EINPUT_DURATION */ + 0x00040000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000001 /* EMC_QRST */ + 0x00000010 /* EMC_QSAFE */ + 0x00000013 /* EMC_RDV */ + 0x00000015 /* EMC_RDV_MASK */ + 0x00000fd6 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000003f5 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x0000000b /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000084 /* EMC_AR2PDEN */ + 0x00000012 /* EMC_RW2PDEN */ + 0x0000008f /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000013 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000006 /* EMC_TCLKSTABLE */ + 0x00000006 /* EMC_TCLKSTOP */ + 0x00001017 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0xe01200b1 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x0000000a /* EMC_DLL_XFORM_DQS0 */ + 0x0000000a /* EMC_DLL_XFORM_DQS1 */ + 0x0000000a /* EMC_DLL_XFORM_DQS2 */ + 0x0000000a /* EMC_DLL_XFORM_DQS3 */ + 0x0000000a /* EMC_DLL_XFORM_DQS4 */ + 0x0000000a /* EMC_DLL_XFORM_DQS5 */ + 0x0000000a /* EMC_DLL_XFORM_DQS6 */ + 0x0000000a /* EMC_DLL_XFORM_DQS7 */ + 0x0000000a /* EMC_DLL_XFORM_DQS8 */ + 0x0000000a /* EMC_DLL_XFORM_DQS9 */ + 0x0000000a /* EMC_DLL_XFORM_DQS10 */ + 0x0000000a /* EMC_DLL_XFORM_DQS11 */ + 0x0000000a /* EMC_DLL_XFORM_DQS12 */ + 0x0000000a /* EMC_DLL_XFORM_DQS13 */ + 0x0000000a /* EMC_DLL_XFORM_DQS14 */ + 0x0000000a /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000001 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000001 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS15 */ + 0x0000000e /* EMC_DLL_XFORM_DQ0 */ + 0x0000000e /* EMC_DLL_XFORM_DQ1 */ + 0x0000000e /* EMC_DLL_XFORM_DQ2 */ + 0x0000000e /* EMC_DLL_XFORM_DQ3 */ + 0x0000000e /* EMC_DLL_XFORM_DQ4 */ + 0x0000000e /* EMC_DLL_XFORM_DQ5 */ + 0x0000000e /* EMC_DLL_XFORM_DQ6 */ + 0x0000000e /* EMC_DLL_XFORM_DQ7 */ + 0x100002a0 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc085 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0606003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000000 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x013a000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000042a0 /* EMC_CFG_PIPE */ + 0x80002062 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000b /* EMC_QPOP */ + >; + }; + + timing-600000000 { + clock-frequency = <600000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200010>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000b61>; + nvidia,emc-mrs-wait-cnt = <0x0128000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0121113d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x0000001c /* EMC_RC */ + 0x0000009a /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000013 /* EMC_RAS */ + 0x00000007 /* EMC_RP */ + 0x00000007 /* EMC_R2W */ + 0x0000000b /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x00000010 /* EMC_W2P */ + 0x00000007 /* EMC_RD_RCD */ + 0x00000007 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_WDV_MASK */ + 0x0000000a /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000003 /* EMC_EINPUT */ + 0x0000000b /* EMC_EINPUT_DURATION */ + 0x00070000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000002 /* EMC_QRST */ + 0x00000012 /* EMC_QSAFE */ + 0x00000016 /* EMC_RDV */ + 0x00000018 /* EMC_RDV_MASK */ + 0x00001208 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000482 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x0000000d /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000096 /* EMC_AR2PDEN */ + 0x00000015 /* EMC_RW2PDEN */ + 0x000000a2 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000015 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000006 /* EMC_TCLKSTABLE */ + 0x00000006 /* EMC_TCLKSTOP */ + 0x00001249 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0xe00e00b1 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x0000000a /* EMC_DLL_XFORM_DQS0 */ + 0x0000000a /* EMC_DLL_XFORM_DQS1 */ + 0x0000000a /* EMC_DLL_XFORM_DQS2 */ + 0x0000000a /* EMC_DLL_XFORM_DQS3 */ + 0x0000000a /* EMC_DLL_XFORM_DQS4 */ + 0x0000000a /* EMC_DLL_XFORM_DQS5 */ + 0x0000000a /* EMC_DLL_XFORM_DQS6 */ + 0x0000000a /* EMC_DLL_XFORM_DQS7 */ + 0x0000000a /* EMC_DLL_XFORM_DQS8 */ + 0x0000000a /* EMC_DLL_XFORM_DQS9 */ + 0x0000000a /* EMC_DLL_XFORM_DQS10 */ + 0x0000000a /* EMC_DLL_XFORM_DQS11 */ + 0x0000000a /* EMC_DLL_XFORM_DQS12 */ + 0x0000000a /* EMC_DLL_XFORM_DQS13 */ + 0x0000000a /* EMC_DLL_XFORM_DQS14 */ + 0x0000000a /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS15 */ + 0x0000000e /* EMC_DLL_XFORM_DQ0 */ + 0x0000000e /* EMC_DLL_XFORM_DQ1 */ + 0x0000000e /* EMC_DLL_XFORM_DQ2 */ + 0x0000000e /* EMC_DLL_XFORM_DQ3 */ + 0x0000000e /* EMC_DLL_XFORM_DQ4 */ + 0x0000000e /* EMC_DLL_XFORM_DQ5 */ + 0x0000000e /* EMC_DLL_XFORM_DQ6 */ + 0x0000000e /* EMC_DLL_XFORM_DQ7 */ + 0x100002a0 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc085 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0606003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000000 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x0128000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000040a0 /* EMC_CFG_PIPE */ + 0x800024aa /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000e /* EMC_QPOP */ >; }; + timing-792000000 { + clock-frequency = <792000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0080089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200418>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000d71>; + nvidia,emc-mrs-wait-cnt = <0x00f8000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040000>; + nvidia,emc-xm2dqspadctrl2 = <0x0120113d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000025 /* EMC_RC */ + 0x000000cc /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x0000001a /* EMC_RAS */ + 0x00000009 /* EMC_RP */ + 0x00000008 /* EMC_R2W */ + 0x0000000d /* EMC_W2R */ + 0x00000004 /* EMC_R2P */ + 0x00000013 /* EMC_W2P */ + 0x00000009 /* EMC_RD_RCD */ + 0x00000009 /* EMC_WR_RCD */ + 0x00000004 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x0000000b /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000002 /* EMC_EINPUT */ + 0x0000000d /* EMC_EINPUT_DURATION */ + 0x00080000 /* EMC_PUTERM_EXTRA */ + 0x00000004 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000001 /* EMC_QRST */ + 0x00000014 /* EMC_QSAFE */ + 0x00000018 /* EMC_RDV */ + 0x0000001a /* EMC_RDV_MASK */ + 0x000017e2 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000005f8 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000003 /* EMC_PDEX2WR */ + 0x00000011 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x000000c6 /* EMC_AR2PDEN */ + 0x00000018 /* EMC_RW2PDEN */ + 0x000000d6 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000005 /* EMC_TCKE */ + 0x00000006 /* EMC_TCKESR */ + 0x00000005 /* EMC_TPD */ + 0x0000001d /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000008 /* EMC_TCLKSTABLE */ + 0x00000008 /* EMC_TCLKSTOP */ + 0x00001822 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x80000005 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab198 /* EMC_FBIO_CFG5 */ + 0xe00700b1 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00000009 /* EMC_DLL_XFORM_DQS0 */ + 0x00000009 /* EMC_DLL_XFORM_DQS1 */ + 0x00000009 /* EMC_DLL_XFORM_DQS2 */ + 0x00000007 /* EMC_DLL_XFORM_DQS3 */ + 0x00000006 /* EMC_DLL_XFORM_DQS4 */ + 0x00000006 /* EMC_DLL_XFORM_DQS5 */ + 0x007fc009 /* EMC_DLL_XFORM_DQS6 */ + 0x00000006 /* EMC_DLL_XFORM_DQS7 */ + 0x00000009 /* EMC_DLL_XFORM_DQS8 */ + 0x00000009 /* EMC_DLL_XFORM_DQS9 */ + 0x00000009 /* EMC_DLL_XFORM_DQS10 */ + 0x00000007 /* EMC_DLL_XFORM_DQS11 */ + 0x00000006 /* EMC_DLL_XFORM_DQS12 */ + 0x00000007 /* EMC_DLL_XFORM_DQS13 */ + 0x00000009 /* EMC_DLL_XFORM_DQS14 */ + 0x00000007 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00034002 /* EMC_DLL_XFORM_ADDR0 */ + 0x00034002 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00034002 /* EMC_DLL_XFORM_ADDR3 */ + 0x00034002 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000007 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000007 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS15 */ + 0x0000000e /* EMC_DLL_XFORM_DQ0 */ + 0x0000000e /* EMC_DLL_XFORM_DQ1 */ + 0x0000000e /* EMC_DLL_XFORM_DQ2 */ + 0x0000000e /* EMC_DLL_XFORM_DQ3 */ + 0x0000000e /* EMC_DLL_XFORM_DQ4 */ + 0x0000000e /* EMC_DLL_XFORM_DQ5 */ + 0x0000000e /* EMC_DLL_XFORM_DQ6 */ + 0x0000000e /* EMC_DLL_XFORM_DQ7 */ + 0x100002a0 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc085 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x61861820 /* EMC_XM2DQSPADCTRL3 */ + 0x004d34d3 /* EMC_XM2DQSPADCTRL4 */ + 0x004d34d3 /* EMC_XM2DQSPADCTRL5 */ + 0x61861800 /* EMC_XM2DQSPADCTRL6 */ + 0x0606003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000000 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x00f8000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000007 /* EMC_CTT */ + 0x00000004 /* EMC_CTT_DURATION */ + 0x00004080 /* EMC_CFG_PIPE */ + 0x80003012 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000f /* EMC_QPOP */ + >; + }; }; }; @@ -1759,30 +5781,609 @@ emc-timings-1 { nvidia,ram-code = <1>; + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emem-configuration = < + 0x40040001 /* MC_EMEM_ARB_CFG */ + 0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0402 /* MC_EMEM_ARB_DA_COVERS */ + 0x77e30303 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-20400000 { + clock-frequency = <20400000>; + + nvidia,emem-configuration = < + 0x40020001 /* MC_EMEM_ARB_CFG */ + 0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0402 /* MC_EMEM_ARB_DA_COVERS */ + 0x76230303 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-40800000 { + clock-frequency = <40800000>; + + nvidia,emem-configuration = < + 0xa0000001 /* MC_EMEM_ARB_CFG */ + 0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0402 /* MC_EMEM_ARB_DA_COVERS */ + 0x74a30303 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-68000000 { + clock-frequency = <68000000>; + + nvidia,emem-configuration = < + 0x00000001 /* MC_EMEM_ARB_CFG */ + 0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0402 /* MC_EMEM_ARB_DA_COVERS */ + 0x74230403 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emem-configuration = < + 0x08000001 /* MC_EMEM_ARB_CFG */ + 0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0403 /* MC_EMEM_ARB_DA_COVERS */ + 0x73c30504 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emem-configuration = < + 0x01000003 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000004 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06040203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0405 /* MC_EMEM_ARB_DA_COVERS */ + 0x73840a06 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-300000000 { + clock-frequency = <300000000>; + + nvidia,emem-configuration = < + 0x08000004 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000007 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000005 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06040202 /* MC_EMEM_ARB_DA_TURNS */ + 0x000b0607 /* MC_EMEM_ARB_DA_COVERS */ + 0x77450e08 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-396000000 { + clock-frequency = <396000000>; + + nvidia,emem-configuration = < + 0x0f000005 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000009 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000007 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06040202 /* MC_EMEM_ARB_DA_TURNS */ + 0x000d0709 /* MC_EMEM_ARB_DA_COVERS */ + 0x7586120a /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-528000000 { + clock-frequency = <528000000>; + + nvidia,emem-configuration = < + 0x0f000007 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RP */ + 0x0000000d /* MC_EMEM_ARB_TIMING_RC */ + 0x00000008 /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000a /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000005 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06050202 /* MC_EMEM_ARB_DA_TURNS */ + 0x0010090d /* MC_EMEM_ARB_DA_COVERS */ + 0x7428180e /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-600000000 { + clock-frequency = <600000000>; + + nvidia,emem-configuration = < + 0x00000009 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RP */ + 0x0000000e /* MC_EMEM_ARB_TIMING_RC */ + 0x00000009 /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000b /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000005 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000007 /* MC_EMEM_ARB_TIMING_W2R */ + 0x07050202 /* MC_EMEM_ARB_DA_TURNS */ + 0x00130b0e /* MC_EMEM_ARB_DA_COVERS */ + 0x73a91b0f /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-792000000 { + clock-frequency = <792000000>; + + nvidia,emem-configuration = < + 0x0e00000b /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000013 /* MC_EMEM_ARB_TIMING_RC */ + 0x0000000c /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000f /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000008 /* MC_EMEM_ARB_TIMING_W2R */ + 0x08060202 /* MC_EMEM_ARB_DA_TURNS */ + 0x00160d13 /* MC_EMEM_ARB_DA_COVERS */ + 0x734c2414 /* MC_EMEM_ARB_MISC0 */ + 0x70000f02 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + }; + + emc-timings-4 { + nvidia,ram-code = <4>; + + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emem-configuration = < + 0x40040001 /* MC_EMEM_ARB_CFG */ + 0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0502 /* MC_EMEM_ARB_DA_COVERS */ + 0x77e30303 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-20400000 { + clock-frequency = <20400000>; + + nvidia,emem-configuration = < + 0x40020001 /* MC_EMEM_ARB_CFG */ + 0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0502 /* MC_EMEM_ARB_DA_COVERS */ + 0x77430303 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-40800000 { + clock-frequency = <40800000>; + + nvidia,emem-configuration = < + 0xa0000001 /* MC_EMEM_ARB_CFG */ + 0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0502 /* MC_EMEM_ARB_DA_COVERS */ + 0x75e30303 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-68000000 { + clock-frequency = <68000000>; + + nvidia,emem-configuration = < + 0x00000001 /* MC_EMEM_ARB_CFG */ + 0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0502 /* MC_EMEM_ARB_DA_COVERS */ + 0x75430403 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emem-configuration = < + 0x08000001 /* MC_EMEM_ARB_CFG */ + 0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0503 /* MC_EMEM_ARB_DA_COVERS */ + 0x74e30504 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emem-configuration = < + 0x01000003 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000004 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06040203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0504 /* MC_EMEM_ARB_DA_COVERS */ + 0x74a40a05 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-300000000 { + clock-frequency = <300000000>; + + nvidia,emem-configuration = < + 0x08000004 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000007 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000005 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06040202 /* MC_EMEM_ARB_DA_TURNS */ + 0x000b0607 /* MC_EMEM_ARB_DA_COVERS */ + 0x77450e08 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-396000000 { + clock-frequency = <396000000>; + + nvidia,emem-configuration = < + 0x0f000005 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000009 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000007 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06040202 /* MC_EMEM_ARB_DA_TURNS */ + 0x000d0709 /* MC_EMEM_ARB_DA_COVERS */ + 0x7586120a /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-528000000 { + clock-frequency = <528000000>; + + nvidia,emem-configuration = < + 0x0f000007 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RP */ + 0x0000000c /* MC_EMEM_ARB_TIMING_RC */ + 0x00000007 /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000a /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000005 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06050202 /* MC_EMEM_ARB_DA_TURNS */ + 0x0010090c /* MC_EMEM_ARB_DA_COVERS */ + 0x7488180d /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-600000000 { + clock-frequency = <600000000>; + + nvidia,emem-configuration = < + 0x00000009 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RP */ + 0x0000000e /* MC_EMEM_ARB_TIMING_RC */ + 0x00000009 /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000b /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000005 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000007 /* MC_EMEM_ARB_TIMING_W2R */ + 0x07050202 /* MC_EMEM_ARB_DA_TURNS */ + 0x00130b0e /* MC_EMEM_ARB_DA_COVERS */ + 0x74691b0f /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-792000000 { + clock-frequency = <792000000>; + + nvidia,emem-configuration = < + 0x0e00000b /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000013 /* MC_EMEM_ARB_TIMING_RC */ + 0x0000000c /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000f /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000008 /* MC_EMEM_ARB_TIMING_W2R */ + 0x08060202 /* MC_EMEM_ARB_DA_TURNS */ + 0x00170e13 /* MC_EMEM_ARB_DA_COVERS */ + 0x746c2414 /* MC_EMEM_ARB_MISC0 */ + 0x70000f02 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + }; + + emc-timings-6 { + nvidia,ram-code = <6>; timing-12750000 { clock-frequency = <12750000>; nvidia,emem-configuration = < - 0x40040001 - 0x8000000a - 0x00000001 - 0x00000001 - 0x00000002 - 0x00000000 - 0x00000002 - 0x00000001 - 0x00000002 - 0x00000008 - 0x00000003 - 0x00000002 - 0x00000003 - 0x00000006 - 0x06030203 - 0x000a0402 - 0x77e30303 - 0x70000f03 - 0x001f0000 + 0x40040001 /* MC_EMEM_ARB_CFG */ + 0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0402 /* MC_EMEM_ARB_DA_COVERS */ + 0x77e30303 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ >; }; @@ -1790,25 +6391,25 @@ clock-frequency = <20400000>; nvidia,emem-configuration = < - 0x40020001 - 0x80000012 - 0x00000001 - 0x00000001 - 0x00000002 - 0x00000000 - 0x00000002 - 0x00000001 - 0x00000002 - 0x00000008 - 0x00000003 - 0x00000002 - 0x00000003 - 0x00000006 - 0x06030203 - 0x000a0402 - 0x76230303 - 0x70000f03 - 0x001f0000 + 0x40020001 /* MC_EMEM_ARB_CFG */ + 0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0402 /* MC_EMEM_ARB_DA_COVERS */ + 0x76230303 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ >; }; @@ -1816,25 +6417,25 @@ clock-frequency = <40800000>; nvidia,emem-configuration = < - 0xa0000001 - 0x80000017 - 0x00000001 - 0x00000001 - 0x00000002 - 0x00000000 - 0x00000002 - 0x00000001 - 0x00000002 - 0x00000008 - 0x00000003 - 0x00000002 - 0x00000003 - 0x00000006 - 0x06030203 - 0x000a0402 - 0x74a30303 - 0x70000f03 - 0x001f0000 + 0xa0000001 /* MC_EMEM_ARB_CFG */ + 0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0402 /* MC_EMEM_ARB_DA_COVERS */ + 0x74a30303 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ >; }; @@ -1842,25 +6443,25 @@ clock-frequency = <68000000>; nvidia,emem-configuration = < - 0x00000001 - 0x8000001e - 0x00000001 - 0x00000001 - 0x00000002 - 0x00000000 - 0x00000002 - 0x00000001 - 0x00000002 - 0x00000008 - 0x00000003 - 0x00000002 - 0x00000003 - 0x00000006 - 0x06030203 - 0x000a0402 - 0x74230403 - 0x70000f03 - 0x001f0000 + 0x00000001 /* MC_EMEM_ARB_CFG */ + 0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0402 /* MC_EMEM_ARB_DA_COVERS */ + 0x74230403 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ >; }; @@ -1868,25 +6469,25 @@ clock-frequency = <102000000>; nvidia,emem-configuration = < - 0x08000001 - 0x80000026 - 0x00000001 - 0x00000001 - 0x00000003 - 0x00000000 - 0x00000002 - 0x00000001 - 0x00000002 - 0x00000008 - 0x00000003 - 0x00000002 - 0x00000003 - 0x00000006 - 0x06030203 - 0x000a0403 - 0x73c30504 - 0x70000f03 - 0x001f0000 + 0x08000001 /* MC_EMEM_ARB_CFG */ + 0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0403 /* MC_EMEM_ARB_DA_COVERS */ + 0x73c30504 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ >; }; @@ -1894,25 +6495,25 @@ clock-frequency = <204000000>; nvidia,emem-configuration = < - 0x01000003 - 0x80000040 - 0x00000001 - 0x00000001 - 0x00000005 - 0x00000002 - 0x00000004 - 0x00000001 - 0x00000002 - 0x00000008 - 0x00000003 - 0x00000002 - 0x00000004 - 0x00000006 - 0x06040203 - 0x000a0405 - 0x73840a06 - 0x70000f03 - 0x001f0000 + 0x01000003 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000004 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06040203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0405 /* MC_EMEM_ARB_DA_COVERS */ + 0x73840a06 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ >; }; @@ -1920,25 +6521,25 @@ clock-frequency = <300000000>; nvidia,emem-configuration = < - 0x08000004 - 0x80000040 - 0x00000001 - 0x00000002 - 0x00000007 - 0x00000004 - 0x00000005 - 0x00000001 - 0x00000002 - 0x00000007 - 0x00000002 - 0x00000002 - 0x00000004 - 0x00000006 - 0x06040202 - 0x000b0607 - 0x77450e08 - 0x70000f03 - 0x001f0000 + 0x08000004 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000007 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000005 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06040202 /* MC_EMEM_ARB_DA_TURNS */ + 0x000b0607 /* MC_EMEM_ARB_DA_COVERS */ + 0x77450e08 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ >; }; @@ -1946,25 +6547,51 @@ clock-frequency = <396000000>; nvidia,emem-configuration = < - 0x0f000005 - 0x80000040 - 0x00000001 - 0x00000002 - 0x00000009 - 0x00000005 - 0x00000007 - 0x00000001 - 0x00000002 - 0x00000008 - 0x00000002 - 0x00000002 - 0x00000004 - 0x00000006 - 0x06040202 - 0x000d0709 - 0x7586120a - 0x70000f03 - 0x001f0000 + 0x0f000005 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000009 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000007 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06040202 /* MC_EMEM_ARB_DA_TURNS */ + 0x000d0709 /* MC_EMEM_ARB_DA_COVERS */ + 0x7586120a /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-528000000 { + clock-frequency = <528000000>; + + nvidia,emem-configuration = < + 0x0f000007 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RP */ + 0x0000000d /* MC_EMEM_ARB_TIMING_RC */ + 0x00000008 /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000a /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000005 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06050202 /* MC_EMEM_ARB_DA_TURNS */ + 0x0010090d /* MC_EMEM_ARB_DA_COVERS */ + 0x7428180e /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ >; }; @@ -1972,25 +6599,25 @@ clock-frequency = <600000000>; nvidia,emem-configuration = < - 0x00000009 - 0x80000040 - 0x00000003 - 0x00000004 - 0x0000000e - 0x00000009 - 0x0000000b - 0x00000001 - 0x00000003 - 0x0000000b - 0x00000002 - 0x00000002 - 0x00000005 - 0x00000007 - 0x07050202 - 0x00130b0e - 0x73a91b0f - 0x70000f03 - 0x001f0000 + 0x00000009 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RP */ + 0x0000000e /* MC_EMEM_ARB_TIMING_RC */ + 0x00000009 /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000b /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000005 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000007 /* MC_EMEM_ARB_TIMING_W2R */ + 0x07050202 /* MC_EMEM_ARB_DA_TURNS */ + 0x00130b0e /* MC_EMEM_ARB_DA_COVERS */ + 0x73a91b0f /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ >; }; @@ -1998,25 +6625,25 @@ clock-frequency = <792000000>; nvidia,emem-configuration = < - 0x0e00000b - 0x80000040 - 0x00000004 - 0x00000005 - 0x00000013 - 0x0000000c - 0x0000000f - 0x00000002 - 0x00000003 - 0x0000000c - 0x00000002 - 0x00000002 - 0x00000006 - 0x00000008 - 0x08060202 - 0x00160d13 - 0x734c2414 - 0x70000f02 - 0x001f0000 + 0x0e00000b /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000013 /* MC_EMEM_ARB_TIMING_RC */ + 0x0000000c /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000f /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000008 /* MC_EMEM_ARB_TIMING_W2R */ + 0x08060202 /* MC_EMEM_ARB_DA_TURNS */ + 0x00160d13 /* MC_EMEM_ARB_DA_COVERS */ + 0x734c2414 /* MC_EMEM_ARB_MISC0 */ + 0x70000f02 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ >; }; }; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index 5d5e6e18bc7b..7309393bfced 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -38,6 +38,9 @@ sor@54540000 { status = "okay"; + avdd-io-hdmi-dp-supply = <&vdd_1v05_run>; + vdd-hdmi-dp-pll-supply = <&vdd_3v3_run>; + nvidia,dpaux = <&dpaux>; nvidia,panel = <&panel>; }; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index b113e47b2b2a..413bfb981de8 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -157,10 +157,11 @@ reg = <0x0 0x54540000 0x0 0x00040000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA124_CLK_SOR0>, + <&tegra_car TEGRA124_CLK_SOR0_OUT>, <&tegra_car TEGRA124_CLK_PLL_D_OUT0>, <&tegra_car TEGRA124_CLK_PLL_DP>, <&tegra_car TEGRA124_CLK_CLK_M>; - clock-names = "sor", "parent", "dp", "safe"; + clock-names = "sor", "out", "parent", "dp", "safe"; resets = <&tegra_car 182>; reset-names = "sor"; status = "disabled"; diff --git a/arch/arm/boot/dts/tegra20-cpu-opp-microvolt.dtsi b/arch/arm/boot/dts/tegra20-cpu-opp-microvolt.dtsi new file mode 100644 index 000000000000..e85ffdbef876 --- /dev/null +++ b/arch/arm/boot/dts/tegra20-cpu-opp-microvolt.dtsi @@ -0,0 +1,201 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + cpu0_opp_table: cpu_opp_table0 { + opp@216000000_750 { + opp-microvolt = <750000 750000 1125000>; + }; + + opp@216000000_800 { + opp-microvolt = <800000 800000 1125000>; + }; + + opp@312000000_750 { + opp-microvolt = <750000 750000 1125000>; + }; + + opp@312000000_800 { + opp-microvolt = <800000 800000 1125000>; + }; + + opp@456000000_750 { + opp-microvolt = <750000 750000 1125000>; + }; + + opp@456000000_800 { + opp-microvolt = <800000 800000 1125000>; + }; + + opp@456000000_800_2_2 { + opp-microvolt = <800000 800000 1125000>; + }; + + opp@456000000_800_3_2 { + opp-microvolt = <800000 800000 1125000>; + }; + + opp@456000000_825 { + opp-microvolt = <825000 825000 1125000>; + }; + + opp@608000000_750 { + opp-microvolt = <750000 750000 1125000>; + }; + + opp@608000000_800 { + opp-microvolt = <800000 800000 1125000>; + }; + + opp@608000000_800_3_2 { + opp-microvolt = <800000 800000 1125000>; + }; + + opp@608000000_825 { + opp-microvolt = <825000 825000 1125000>; + }; + + opp@608000000_850 { + opp-microvolt = <850000 850000 1125000>; + }; + + opp@608000000_900 { + opp-microvolt = <900000 900000 1125000>; + }; + + opp@760000000_775 { + opp-microvolt = <775000 775000 1125000>; + }; + + opp@760000000_800 { + opp-microvolt = <800000 800000 1125000>; + }; + + opp@760000000_850 { + opp-microvolt = <850000 850000 1125000>; + }; + + opp@760000000_875 { + opp-microvolt = <875000 875000 1125000>; + }; + + opp@760000000_875_1_1 { + opp-microvolt = <875000 875000 1125000>; + }; + + opp@760000000_875_0_2 { + opp-microvolt = <875000 875000 1125000>; + }; + + opp@760000000_875_1_2 { + opp-microvolt = <875000 875000 1125000>; + }; + + opp@760000000_900 { + opp-microvolt = <900000 900000 1125000>; + }; + + opp@760000000_975 { + opp-microvolt = <975000 975000 1125000>; + }; + + opp@816000000_800 { + opp-microvolt = <800000 800000 1125000>; + }; + + opp@816000000_850 { + opp-microvolt = <850000 850000 1125000>; + }; + + opp@816000000_875 { + opp-microvolt = <875000 875000 1125000>; + }; + + opp@816000000_950 { + opp-microvolt = <950000 950000 1125000>; + }; + + opp@816000000_1000 { + opp-microvolt = <1000000 1000000 1125000>; + }; + + opp@912000000_850 { + opp-microvolt = <850000 850000 1125000>; + }; + + opp@912000000_900 { + opp-microvolt = <900000 900000 1125000>; + }; + + opp@912000000_925 { + opp-microvolt = <925000 925000 1125000>; + }; + + opp@912000000_950 { + opp-microvolt = <950000 950000 1125000>; + }; + + opp@912000000_950_0_2 { + opp-microvolt = <950000 950000 1125000>; + }; + + opp@912000000_950_2_2 { + opp-microvolt = <950000 950000 1125000>; + }; + + opp@912000000_1000 { + opp-microvolt = <1000000 1000000 1125000>; + }; + + opp@912000000_1050 { + opp-microvolt = <1050000 1050000 1125000>; + }; + + opp@1000000000_875 { + opp-microvolt = <875000 875000 1125000>; + }; + + opp@1000000000_900 { + opp-microvolt = <900000 900000 1125000>; + }; + + opp@1000000000_950 { + opp-microvolt = <950000 950000 1125000>; + }; + + opp@1000000000_975 { + opp-microvolt = <975000 975000 1125000>; + }; + + opp@1000000000_1000 { + opp-microvolt = <1000000 1000000 1125000>; + }; + + opp@1000000000_1000_0_2 { + opp-microvolt = <1000000 1000000 1125000>; + }; + + opp@1000000000_1025 { + opp-microvolt = <1025000 1025000 1125000>; + }; + + opp@1000000000_1100 { + opp-microvolt = <1100000 1100000 1125000>; + }; + + opp@1200000000_1000 { + opp-microvolt = <1000000 1000000 1125000>; + }; + + opp@1200000000_1050 { + opp-microvolt = <1050000 1050000 1125000>; + }; + + opp@1200000000_1100 { + opp-microvolt = <1100000 1100000 1125000>; + }; + + opp@1200000000_1125 { + opp-microvolt = <1125000 1125000 1125000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra20-cpu-opp.dtsi b/arch/arm/boot/dts/tegra20-cpu-opp.dtsi new file mode 100644 index 000000000000..c878f4231791 --- /dev/null +++ b/arch/arm/boot/dts/tegra20-cpu-opp.dtsi @@ -0,0 +1,302 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + cpu0_opp_table: cpu_opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp@216000000_750 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x0F 0x0003>; + opp-hz = /bits/ 64 <216000000>; + }; + + opp@216000000_800 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x0F 0x0004>; + opp-hz = /bits/ 64 <216000000>; + }; + + opp@312000000_750 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x0F 0x0003>; + opp-hz = /bits/ 64 <312000000>; + }; + + opp@312000000_800 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x0F 0x0004>; + opp-hz = /bits/ 64 <312000000>; + }; + + opp@456000000_750 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x0C 0x0003>; + opp-hz = /bits/ 64 <456000000>; + }; + + opp@456000000_800 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x03 0x0006>; + opp-hz = /bits/ 64 <456000000>; + }; + + opp@456000000_800_2_2 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0004>; + opp-hz = /bits/ 64 <456000000>; + }; + + opp@456000000_800_3_2 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x08 0x0004>; + opp-hz = /bits/ 64 <456000000>; + }; + + opp@456000000_825 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x03 0x0001>; + opp-hz = /bits/ 64 <456000000>; + }; + + opp@608000000_750 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x08 0x0003>; + opp-hz = /bits/ 64 <608000000>; + }; + + opp@608000000_800 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0006>; + opp-hz = /bits/ 64 <608000000>; + }; + + opp@608000000_800_3_2 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x08 0x0004>; + opp-hz = /bits/ 64 <608000000>; + }; + + opp@608000000_825 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0001>; + opp-hz = /bits/ 64 <608000000>; + }; + + opp@608000000_850 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x03 0x0006>; + opp-hz = /bits/ 64 <608000000>; + }; + + opp@608000000_900 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x03 0x0001>; + opp-hz = /bits/ 64 <608000000>; + }; + + opp@760000000_775 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x08 0x0003>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_800 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x08 0x0004>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_850 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0006>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_875 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0001>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_875_1_1 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x02 0x0002>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_875_0_2 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x01 0x0004>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_875_1_2 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x02 0x0004>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x01 0x0002>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_975 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x03 0x0001>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@816000000_800 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x08 0x0007>; + opp-hz = /bits/ 64 <816000000>; + }; + + opp@816000000_850 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0002>; + opp-hz = /bits/ 64 <816000000>; + }; + + opp@816000000_875 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0005>; + opp-hz = /bits/ 64 <816000000>; + }; + + opp@816000000_950 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x03 0x0006>; + opp-hz = /bits/ 64 <816000000>; + }; + + opp@816000000_1000 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x03 0x0001>; + opp-hz = /bits/ 64 <816000000>; + }; + + opp@912000000_850 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x08 0x0007>; + opp-hz = /bits/ 64 <912000000>; + }; + + opp@912000000_900 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0002>; + opp-hz = /bits/ 64 <912000000>; + }; + + opp@912000000_925 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0001>; + opp-hz = /bits/ 64 <912000000>; + }; + + opp@912000000_950 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x02 0x0006>; + opp-hz = /bits/ 64 <912000000>; + }; + + opp@912000000_950_0_2 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x01 0x0004>; + opp-hz = /bits/ 64 <912000000>; + }; + + opp@912000000_950_2_2 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0004>; + opp-hz = /bits/ 64 <912000000>; + }; + + opp@912000000_1000 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x01 0x0002>; + opp-hz = /bits/ 64 <912000000>; + }; + + opp@912000000_1050 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x03 0x0001>; + opp-hz = /bits/ 64 <912000000>; + }; + + opp@1000000000_875 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x08 0x0007>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_900 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0002>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_950 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0004>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0001>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_1000 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x02 0x0006>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_1000_0_2 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x01 0x0004>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_1025 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x01 0x0002>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_1100 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x03 0x0001>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1200000000_1000 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x08 0x0004>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1050 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0004>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1100 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x02 0x0004>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1125 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x01 0x0004>; + opp-hz = /bits/ 64 <1200000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index 8861e0976e37..85fce5bc72d6 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -3,6 +3,8 @@ #include <dt-bindings/input/input.h> #include "tegra20.dtsi" +#include "tegra20-cpu-opp.dtsi" +#include "tegra20-cpu-opp-microvolt.dtsi" / { model = "Toshiba AC100 / Dynabook AZ"; @@ -337,18 +339,26 @@ regulator-always-on; }; - sm0 { + core_vdd_reg: sm0 { regulator-name = "+1.2vs_sm0,vdd_core"; regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; + regulator-max-microvolt = <1225000>; + regulator-coupled-with = <&rtc_vdd_reg &cpu_vdd_reg>; + regulator-coupled-max-spread = <170000 450000>; regulator-always-on; + + nvidia,tegra-core-regulator; }; - sm1 { + cpu_vdd_reg: sm1 { regulator-name = "+1.0vs_sm1,vdd_cpu"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1100000>; + regulator-coupled-with = <&core_vdd_reg &rtc_vdd_reg>; + regulator-coupled-max-spread = <450000 450000>; regulator-always-on; + + nvidia,tegra-cpu-regulator; }; sm2_reg: sm2 { @@ -367,10 +377,15 @@ regulator-always-on; }; - ldo2 { + rtc_vdd_reg: ldo2 { regulator-name = "+1.2vs_ldo2,vdd_rtc"; regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; + regulator-max-microvolt = <1225000>; + regulator-coupled-with = <&core_vdd_reg &cpu_vdd_reg>; + regulator-coupled-max-spread = <170000 450000>; + regulator-always-on; + + nvidia,tegra-rtc-regulator; }; ldo3 { @@ -603,4 +618,16 @@ <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; + + cpus { + cpu0: cpu@0 { + cpu-supply = <&cpu_vdd_reg>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu@1 { + cpu-supply = <&cpu_vdd_reg>; + operating-points-v2 = <&cpu0_opp_table>; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 3e5ac096d85e..8debd3d3c20d 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -3,6 +3,7 @@ #include <dt-bindings/input/input.h> #include "tegra20.dtsi" +#include "tegra20-cpu-opp.dtsi" / { model = "Compulab TrimSlice board"; @@ -471,4 +472,14 @@ <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; + + cpus { + cpu0: cpu@0 { + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu@1 { + operating-points-v2 = <&cpu0_opp_table>; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 8c942e60703e..9c58e7fcf5c0 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -851,12 +851,14 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + clocks = <&tegra_car TEGRA20_CLK_CCLK>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + clocks = <&tegra_car TEGRA20_CLK_CCLK>; }; }; diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi index 02f8126481a2..8b7a827d604d 100644 --- a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi @@ -994,11 +994,17 @@ id = <0>; blocks = <0x5>; irq-trigger = <0x1>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; stmpe_touchscreen { compatible = "st,stmpe-ts"; - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; /* 8 sample average control */ st,ave-ctrl = <3>; /* 7 length fractional part in z */ @@ -1008,17 +1014,17 @@ * current limit value */ st,i-drive = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; /* 1 ms panel driver settling time */ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + /* forbid to use ADC channels 3-0 (touch) */ + st,norequest-mask = <0x0F>; + }; }; /* diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index 7f112f192fe9..c18f6f61d764 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -976,11 +976,17 @@ id = <0>; blocks = <0x5>; irq-trigger = <0x1>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; stmpe_touchscreen { compatible = "st,stmpe-ts"; - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; /* 8 sample average control */ st,ave-ctrl = <3>; /* 7 length fractional part in z */ @@ -990,17 +996,17 @@ * current limit value */ st,i-drive = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; /* 1 ms panel driver settling time */ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + /* forbid to use ADC channels 3-0 (touch) */ + st,norequest-mask = <0x0F>; + }; }; /* diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts index 4dbd4af679f0..9234988624ec 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts @@ -2,6 +2,8 @@ /dts-v1/; #include "tegra30-cardhu.dtsi" +#include "tegra30-cpu-opp.dtsi" +#include "tegra30-cpu-opp-microvolt.dtsi" /* This dts file support the cardhu A04 and later versions of board */ @@ -103,4 +105,50 @@ gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>; }; }; + + i2c@7000d000 { + pmic: tps65911@2d { + regulators { + vddctrl_reg: vddctrl { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1125000>; + regulator-coupled-with = <&vddcore_reg>; + regulator-coupled-max-spread = <300000>; + regulator-max-step-microvolt = <100000>; + + nvidia,tegra-cpu-regulator; + }; + }; + }; + + vddcore_reg: tps62361@60 { + regulator-coupled-with = <&vddctrl_reg>; + regulator-coupled-max-spread = <300000>; + regulator-max-step-microvolt = <100000>; + + nvidia,tegra-core-regulator; + }; + }; + + cpus { + cpu0: cpu@0 { + cpu-supply = <&vddctrl_reg>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu@1 { + cpu-supply = <&vddctrl_reg>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu@2 { + cpu-supply = <&vddctrl_reg>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu@3 { + cpu-supply = <&vddctrl_reg>; + operating-points-v2 = <&cpu0_opp_table>; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index 35af03ca9e90..1f9198bb24ff 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -845,11 +845,18 @@ id = <0>; blocks = <0x5>; irq-trigger = <0x1>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; + /* forbid to use ADC channels 3-0 (touch) */ stmpe_touchscreen { compatible = "st,stmpe-ts"; - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; /* 8 sample average control */ st,ave-ctrl = <3>; /* 7 length fractional part in z */ @@ -859,17 +866,16 @@ * current limit value */ st,i-drive = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; /* 1 ms panel driver settling time */ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + st,norequest-mask = <0x0F>; + }; }; /* diff --git a/arch/arm/boot/dts/tegra30-cpu-opp-microvolt.dtsi b/arch/arm/boot/dts/tegra30-cpu-opp-microvolt.dtsi new file mode 100644 index 000000000000..5c40ef49894f --- /dev/null +++ b/arch/arm/boot/dts/tegra30-cpu-opp-microvolt.dtsi @@ -0,0 +1,801 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + cpu0_opp_table: cpu_opp_table0 { + opp@51000000_800 { + opp-microvolt = <800000 800000 1250000>; + }; + + opp@51000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@51000000_912 { + opp-microvolt = <912000 912000 1250000>; + }; + + opp@102000000_800 { + opp-microvolt = <800000 800000 1250000>; + }; + + opp@102000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@102000000_912 { + opp-microvolt = <912000 912000 1250000>; + }; + + opp@204000000_800 { + opp-microvolt = <800000 800000 1250000>; + }; + + opp@204000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@204000000_912 { + opp-microvolt = <912000 912000 1250000>; + }; + + opp@312000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@312000000_912 { + opp-microvolt = <912000 912000 1250000>; + }; + + opp@340000000_800 { + opp-microvolt = <800000 800000 1250000>; + }; + + opp@340000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@370000000_800 { + opp-microvolt = <800000 800000 1250000>; + }; + + opp@456000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@456000000_912 { + opp-microvolt = <912000 912000 1250000>; + }; + + opp@475000000_800 { + opp-microvolt = <800000 800000 1250000>; + }; + + opp@475000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@475000000_850_0_1 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@475000000_850_0_4 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@475000000_850_0_7 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@475000000_850_0_8 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@608000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@608000000_912 { + opp-microvolt = <912000 912000 1250000>; + }; + + opp@620000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_1_1 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_2_1 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_3_1 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_1_4 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_2_4 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_3_4 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_1_7 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_2_7 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_3_7 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_4_7 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_1_8 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_2_8 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_3_8 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_4_8 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_900 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@760000000_850_3_1 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@760000000_850_3_2 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@760000000_850_3_3 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@760000000_850_3_4 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@760000000_850_3_7 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@760000000_850_4_7 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@760000000_850_3_8 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@760000000_850_4_8 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@760000000_850_0_10 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@760000000_900 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_1_1 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_2_1 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_1_2 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_2_2 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_1_3 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_2_3 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_1_4 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_2_4 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_1_7 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_2_7 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_1_8 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_2_8 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_912 { + opp-microvolt = <912000 912000 1250000>; + }; + + opp@760000000_975 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@816000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@816000000_912 { + opp-microvolt = <912000 912000 1250000>; + }; + + opp@860000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@860000000_900 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_2_1 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_3_1 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_2_2 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_3_2 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_2_3 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_3_3 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_2_4 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_3_4 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_2_7 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_3_7 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_4_7 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_2_8 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_3_8 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_4_8 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_975 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@860000000_975_1_1 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@860000000_975_1_2 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@860000000_975_1_3 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@860000000_975_1_4 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@860000000_975_1_7 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@860000000_975_1_8 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@860000000_1000 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@910000000_900 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@1000000000_900 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@1000000000_975 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_2_1 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_3_1 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_2_2 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_3_2 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_2_3 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_3_3 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_2_4 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_3_4 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_2_7 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_3_7 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_4_7 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_2_8 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_3_8 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_4_8 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_1000 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1000000000_1025 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1100000000_900 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@1100000000_975 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1100000000_975_3_1 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1100000000_975_3_2 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1100000000_975_3_3 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1100000000_975_3_4 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1100000000_975_3_7 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1100000000_975_4_7 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1100000000_975_3_8 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1100000000_975_4_8 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1100000000_1000 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1100000000_1000_2_1 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1100000000_1000_2_2 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1100000000_1000_2_3 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1100000000_1000_2_4 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1100000000_1000_2_7 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1100000000_1000_2_8 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1100000000_1025 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1100000000_1075 { + opp-microvolt = <1075000 1075000 1250000>; + }; + + opp@1150000000_975 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1200000000_975 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1200000000_1000 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1200000000_1000_3_1 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1200000000_1000_3_2 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1200000000_1000_3_3 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1200000000_1000_3_4 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1200000000_1000_3_7 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1200000000_1000_4_7 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1200000000_1000_3_8 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1200000000_1000_4_8 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1200000000_1025 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1200000000_1025_2_1 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1200000000_1025_2_2 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1200000000_1025_2_3 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1200000000_1025_2_4 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1200000000_1025_2_7 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1200000000_1025_2_8 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1200000000_1050 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1200000000_1075 { + opp-microvolt = <1075000 1075000 1250000>; + }; + + opp@1200000000_1100 { + opp-microvolt = <1100000 1100000 1250000>; + }; + + opp@1300000000_1000 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1300000000_1000_4_7 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1300000000_1000_4_8 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1300000000_1025 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1300000000_1025_3_1 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1300000000_1025_3_7 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1300000000_1025_3_8 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1300000000_1050 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1050_2_1 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1050_3_2 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1050_3_3 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1050_3_4 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1050_3_5 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1050_3_6 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1050_2_7 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1050_2_8 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1050_3_12 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1050_3_13 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1075 { + opp-microvolt = <1075000 1075000 1250000>; + }; + + opp@1300000000_1075_2_2 { + opp-microvolt = <1075000 1075000 1250000>; + }; + + opp@1300000000_1075_2_3 { + opp-microvolt = <1075000 1075000 1250000>; + }; + + opp@1300000000_1075_2_4 { + opp-microvolt = <1075000 1075000 1250000>; + }; + + opp@1300000000_1100 { + opp-microvolt = <1100000 1100000 1250000>; + }; + + opp@1300000000_1125 { + opp-microvolt = <1125000 1125000 1250000>; + }; + + opp@1300000000_1150 { + opp-microvolt = <1150000 1150000 1250000>; + }; + + opp@1300000000_1175 { + opp-microvolt = <1175000 1175000 1250000>; + }; + + opp@1400000000_1100 { + opp-microvolt = <1100000 1100000 1250000>; + }; + + opp@1400000000_1125 { + opp-microvolt = <1125000 1125000 1250000>; + }; + + opp@1400000000_1150 { + opp-microvolt = <1150000 1150000 1250000>; + }; + + opp@1400000000_1150_2_4 { + opp-microvolt = <1150000 1150000 1250000>; + }; + + opp@1400000000_1175 { + opp-microvolt = <1175000 1175000 1250000>; + }; + + opp@1400000000_1237 { + opp-microvolt = <1237000 1237000 1250000>; + }; + + opp@1500000000_1125 { + opp-microvolt = <1125000 1125000 1250000>; + }; + + opp@1500000000_1125_4_5 { + opp-microvolt = <1125000 1125000 1250000>; + }; + + opp@1500000000_1125_4_6 { + opp-microvolt = <1125000 1125000 1250000>; + }; + + opp@1500000000_1125_4_12 { + opp-microvolt = <1125000 1125000 1250000>; + }; + + opp@1500000000_1125_4_13 { + opp-microvolt = <1125000 1125000 1250000>; + }; + + opp@1500000000_1150 { + opp-microvolt = <1150000 1150000 1250000>; + }; + + opp@1500000000_1150_3_5 { + opp-microvolt = <1150000 1150000 1250000>; + }; + + opp@1500000000_1150_3_6 { + opp-microvolt = <1150000 1150000 1250000>; + }; + + opp@1500000000_1150_3_12 { + opp-microvolt = <1150000 1150000 1250000>; + }; + + opp@1500000000_1150_3_13 { + opp-microvolt = <1150000 1150000 1250000>; + }; + + opp@1500000000_1200 { + opp-microvolt = <1200000 1200000 1250000>; + }; + + opp@1500000000_1237 { + opp-microvolt = <1237000 1237000 1250000>; + }; + + opp@1600000000_1212 { + opp-microvolt = <1212000 1212000 1250000>; + }; + + opp@1600000000_1237 { + opp-microvolt = <1237000 1237000 1250000>; + }; + + opp@1700000000_1212 { + opp-microvolt = <1212000 1212000 1250000>; + }; + + opp@1700000000_1237 { + opp-microvolt = <1237000 1237000 1250000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra30-cpu-opp.dtsi b/arch/arm/boot/dts/tegra30-cpu-opp.dtsi new file mode 100644 index 000000000000..d64fc262585e --- /dev/null +++ b/arch/arm/boot/dts/tegra30-cpu-opp.dtsi @@ -0,0 +1,1202 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + cpu0_opp_table: cpu_opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp@51000000_800 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x31FE>; + opp-hz = /bits/ 64 <51000000>; + }; + + opp@51000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0C01>; + opp-hz = /bits/ 64 <51000000>; + }; + + opp@51000000_912 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0200>; + opp-hz = /bits/ 64 <51000000>; + }; + + opp@102000000_800 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x31FE>; + opp-hz = /bits/ 64 <102000000>; + }; + + opp@102000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0C01>; + opp-hz = /bits/ 64 <102000000>; + }; + + opp@102000000_912 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0200>; + opp-hz = /bits/ 64 <102000000>; + }; + + opp@204000000_800 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x31FE>; + opp-hz = /bits/ 64 <204000000>; + }; + + opp@204000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0C01>; + opp-hz = /bits/ 64 <204000000>; + }; + + opp@204000000_912 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0200>; + opp-hz = /bits/ 64 <204000000>; + }; + + opp@312000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0C00>; + opp-hz = /bits/ 64 <312000000>; + }; + + opp@312000000_912 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0200>; + opp-hz = /bits/ 64 <312000000>; + }; + + opp@340000000_800 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0192>; + opp-hz = /bits/ 64 <340000000>; + }; + + opp@340000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x0F 0x0001>; + opp-hz = /bits/ 64 <340000000>; + }; + + opp@370000000_800 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1E 0x306C>; + opp-hz = /bits/ 64 <370000000>; + }; + + opp@456000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0C00>; + opp-hz = /bits/ 64 <456000000>; + }; + + opp@456000000_912 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0200>; + opp-hz = /bits/ 64 <456000000>; + }; + + opp@475000000_800 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1E 0x31FE>; + opp-hz = /bits/ 64 <475000000>; + }; + + opp@475000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x0F 0x0001>; + opp-hz = /bits/ 64 <475000000>; + }; + + opp@475000000_850_0_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0002>; + opp-hz = /bits/ 64 <475000000>; + }; + + opp@475000000_850_0_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0010>; + opp-hz = /bits/ 64 <475000000>; + }; + + opp@475000000_850_0_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0080>; + opp-hz = /bits/ 64 <475000000>; + }; + + opp@475000000_850_0_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0100>; + opp-hz = /bits/ 64 <475000000>; + }; + + opp@608000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0400>; + opp-hz = /bits/ 64 <608000000>; + }; + + opp@608000000_912 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0200>; + opp-hz = /bits/ 64 <608000000>; + }; + + opp@620000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1E 0x306C>; + opp-hz = /bits/ 64 <620000000>; + }; + + opp@640000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x0F 0x0001>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_1_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0002>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_2_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0002>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_3_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0002>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_1_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0010>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_2_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0010>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_3_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0010>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_1_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0080>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_2_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0080>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_3_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0080>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_4_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0080>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_1_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0100>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_2_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0100>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_3_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0100>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_4_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0100>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_900 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0192>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@760000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1E 0x3461>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_850_3_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0002>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_850_3_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0004>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_850_3_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0008>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_850_3_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0010>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_850_3_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0080>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_850_4_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0080>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_850_3_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0100>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_850_4_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0100>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_850_0_10 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0400>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0001>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_1_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0002>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_2_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0002>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_1_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0004>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_2_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0004>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_1_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0008>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_2_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0008>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_1_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0010>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_2_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0010>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_1_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0080>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_2_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0080>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_1_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0100>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_2_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0100>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_912 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0200>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_975 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0192>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@816000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0400>; + opp-hz = /bits/ 64 <816000000>; + }; + + opp@816000000_912 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0200>; + opp-hz = /bits/ 64 <816000000>; + }; + + opp@860000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x0C 0x0001>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0001>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_2_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0002>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_3_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0002>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_2_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0004>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_3_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0004>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_2_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0008>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_3_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0008>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_2_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0010>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_3_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0010>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_2_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0080>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_3_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0080>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_4_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0080>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_2_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0100>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_3_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0100>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_4_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0100>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_975 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0001>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_975_1_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0002>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_975_1_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0004>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_975_1_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0008>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_975_1_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0010>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_975_1_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0080>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_975_1_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0100>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_1000 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0192>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@910000000_900 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x18 0x3060>; + opp-hz = /bits/ 64 <910000000>; + }; + + opp@1000000000_900 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x0C 0x0001>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x03 0x0001>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_2_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0002>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_3_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0002>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_2_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0004>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_3_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0004>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_2_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0008>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_3_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0008>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_2_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0010>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_3_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0010>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_2_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0080>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_3_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0080>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_4_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0080>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_2_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0100>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_3_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0100>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_4_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0100>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_1000 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x019E>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_1025 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0192>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1100000000_900 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0001>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_975 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x06 0x0001>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_975_3_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0002>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_975_3_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0004>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_975_3_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0008>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_975_3_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0010>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_975_3_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0080>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_975_4_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0080>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_975_3_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0100>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_975_4_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0100>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_1000 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0001>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_1000_2_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0002>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_1000_2_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0004>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_1000_2_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0008>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_1000_2_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0010>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_1000_2_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0080>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_1000_2_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0100>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_1025 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x019E>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_1075 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0192>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1150000000_975 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x18 0x3060>; + opp-hz = /bits/ 64 <1150000000>; + }; + + opp@1200000000_975 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0001>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1000 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0001>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1000_3_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0002>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1000_3_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0004>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1000_3_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0008>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1000_3_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0010>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1000_3_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0080>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1000_4_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0080>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1000_3_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0100>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1000_4_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0100>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1025 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0001>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1025_2_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0002>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1025_2_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0004>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1025_2_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0008>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1025_2_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0010>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1025_2_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0080>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1025_2_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0100>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1050 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x019E>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1075 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0001>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1100 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0192>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1300000000_1000 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0001>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1000_4_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0080>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1000_4_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0100>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1025 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0001>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1025_3_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0002>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1025_3_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0080>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1025_3_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0100>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x12 0x3061>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050_2_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0002>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050_3_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0004>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050_3_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0008>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050_3_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0010>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050_3_5 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0020>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050_3_6 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0040>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050_2_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0080>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050_2_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0100>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050_3_12 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x1000>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050_3_13 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x2000>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1075 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0182>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1075_2_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0004>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1075_2_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0008>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1075_2_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0010>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1100 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x001C>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1125 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0001>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1150 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0182>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1175 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0010>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1400000000_1100 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x18 0x307C>; + opp-hz = /bits/ 64 <1400000000>; + }; + + opp@1400000000_1125 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x000C>; + opp-hz = /bits/ 64 <1400000000>; + }; + + opp@1400000000_1150 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x000C>; + opp-hz = /bits/ 64 <1400000000>; + }; + + opp@1400000000_1150_2_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0010>; + opp-hz = /bits/ 64 <1400000000>; + }; + + opp@1400000000_1175 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0010>; + opp-hz = /bits/ 64 <1400000000>; + }; + + opp@1400000000_1237 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0010>; + opp-hz = /bits/ 64 <1400000000>; + }; + + opp@1500000000_1125 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0010>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1125_4_5 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0020>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1125_4_6 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0040>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1125_4_12 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x1000>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1125_4_13 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x2000>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1150 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0010>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1150_3_5 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0020>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1150_3_6 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0040>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1150_3_12 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x1000>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1150_3_13 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x2000>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1200 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0010>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1237 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0010>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1600000000_1212 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x3060>; + opp-hz = /bits/ 64 <1600000000>; + }; + + opp@1600000000_1237 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x3060>; + opp-hz = /bits/ 64 <1600000000>; + }; + + opp@1700000000_1212 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x3060>; + opp-hz = /bits/ 64 <1700000000>; + }; + + opp@1700000000_1237 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x3060>; + opp-hz = /bits/ 64 <1700000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index e074258d4518..55ae050042ce 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -422,6 +422,7 @@ clocks = <&tegra_car TEGRA30_CLK_VDE>; reset-names = "vde", "mc"; resets = <&tegra_car 61>, <&mc TEGRA30_MC_RESET_VDE>; + iommus = <&mc TEGRA_SWGROUP_VDE>; }; apbmisc@70000800 { @@ -732,6 +733,15 @@ #reset-cells = <1>; }; + memory-controller@7000f400 { + compatible = "nvidia,tegra30-emc"; + reg = <0x7000f400 0x400>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_EMC>; + + nvidia,memory-controller = <&mc>; + }; + fuse@7000f800 { compatible = "nvidia,tegra30-efuse"; reg = <0x7000f800 0x400>; @@ -997,24 +1007,28 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + clocks = <&tegra_car TEGRA30_CLK_CCLK_G>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + clocks = <&tegra_car TEGRA30_CLK_CCLK_G>; }; cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <2>; + clocks = <&tegra_car TEGRA30_CLK_CCLK_G>; }; cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <3>; + clocks = <&tegra_car TEGRA30_CLK_CCLK_G>; }; }; diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi index b6a1eeeb2bb4..fba37b8756f7 100644 --- a/arch/arm/boot/dts/vf-colibri.dtsi +++ b/arch/arm/boot/dts/vf-colibri.dtsi @@ -129,8 +129,11 @@ &i2c0 { clock-frequency = <400000>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c0>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; }; &nfc { @@ -308,6 +311,13 @@ >; }; + pinctrl_i2c0_gpio: i2c0gpiogrp { + fsl,pins = < + VF610_PAD_PTB14__GPIO_36 0x37ff + VF610_PAD_PTB15__GPIO_37 0x37ff + >; + }; + pinctrl_nfc: nfcgrp { fsl,pins = < VF610_PAD_PTD23__NF_IO7 0x28df diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi b/arch/arm/boot/dts/vf500-colibri.dtsi index 237b0246fa84..92255f8893ce 100644 --- a/arch/arm/boot/dts/vf500-colibri.dtsi +++ b/arch/arm/boot/dts/vf500-colibri.dtsi @@ -44,7 +44,7 @@ / { model = "Toradex Colibri VF50 COM"; - compatible = "toradex,vf610-colibri_vf50", "fsl,vf500"; + compatible = "toradex,vf500-colibri_vf50", "fsl,vf500"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/vf610-bk4.dts b/arch/arm/boot/dts/vf610-bk4.dts index 0f3870d3b099..830c85476b3d 100644 --- a/arch/arm/boot/dts/vf610-bk4.dts +++ b/arch/arm/boot/dts/vf610-bk4.dts @@ -259,24 +259,28 @@ &uart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; + /delete-property/dma-names; status = "okay"; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; + /delete-property/dma-names; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; + /delete-property/dma-names; status = "okay"; }; &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; + /delete-property/dma-names; status = "okay"; }; diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts index c8ebb23c4e02..d7caf618f980 100644 --- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts +++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts @@ -183,11 +183,6 @@ #address-cells = <1>; #size-cells = <0>; - port@1 { - reg = <1>; - label = "internal_j9"; - }; - port@2 { reg = <2>; label = "eth_fc_1000_2"; @@ -271,11 +266,6 @@ #address-cells = <1>; #size-cells = <0>; - port@1 { - reg = <1>; - label = "internal_j8"; - }; - port@2 { reg = <2>; label = "eth_fc_1000_8"; @@ -689,7 +679,6 @@ linux,rs485-enabled-at-boot-time; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - rs485-rts-delay = <0 200>; status = "okay"; }; @@ -697,7 +686,6 @@ linux,rs485-enabled-at-boot-time; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; - rs485-rts-delay = <0 200>; status = "okay"; }; diff --git a/arch/arm/configs/aspeed_g4_defconfig b/arch/arm/configs/aspeed_g4_defconfig index 1857df992484..303f75a3baec 100644 --- a/arch/arm/configs/aspeed_g4_defconfig +++ b/arch/arm/configs/aspeed_g4_defconfig @@ -132,10 +132,12 @@ CONFIG_ASPEED_BT_IPMI_BMC=y CONFIG_HW_RANDOM_TIMERIOMEM=y # CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MUX=y CONFIG_I2C_MUX_PCA9541=y CONFIG_I2C_MUX_PCA954x=y CONFIG_I2C_ASPEED=y CONFIG_I2C_FSI=y +CONFIG_SPI=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_ASPEED=y @@ -185,6 +187,12 @@ CONFIG_USB_CONFIGFS_F_LB_SS=y CONFIG_USB_CONFIGFS_F_FS=y CONFIG_USB_CONFIGFS_F_HID=y CONFIG_USB_CONFIGFS_F_PRINTER=y +CONFIG_MMC=y +# CONFIG_PWRSEQ_EMMC is not set +# CONFIG_PWRSEQ_SIMPLE is not set +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_OF_ASPEED=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_CLASS_FLASH=y @@ -216,7 +224,6 @@ CONFIG_FSI_MASTER_GPIO=y CONFIG_FSI_MASTER_HUB=y CONFIG_FSI_MASTER_AST_CF=y CONFIG_FSI_SCOM=y -CONFIG_FSI_SBEFIFO=y CONFIG_FANOTIFY=y CONFIG_OVERLAY_FS=y CONFIG_TMPFS=y @@ -231,7 +238,6 @@ CONFIG_SQUASHFS_ZSTD=y # CONFIG_NETWORK_FILESYSTEMS is not set CONFIG_HARDENED_USERCOPY=y CONFIG_FORTIFY_SOURCE=y -# CONFIG_CRYPTO_ECHAINIV is not set CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_USER_API_HASH=y @@ -247,14 +253,14 @@ CONFIG_DEBUG_INFO_REDUCED=y CONFIG_DEBUG_INFO_DWARF4=y CONFIG_GDB_SCRIPTS=y CONFIG_STRIP_ASM_SYMS=y +CONFIG_SCHED_STACK_END_CHECK=y +CONFIG_PANIC_ON_OOPS=y +CONFIG_PANIC_TIMEOUT=-1 CONFIG_SOFTLOCKUP_DETECTOR=y # CONFIG_DETECT_HUNG_TASK is not set CONFIG_WQ_WATCHDOG=y -CONFIG_PANIC_ON_OOPS=y -CONFIG_PANIC_TIMEOUT=-1 # CONFIG_SCHED_DEBUG is not set -CONFIG_SCHED_STACK_END_CHECK=y CONFIG_FUNCTION_TRACER=y -# CONFIG_RUNTIME_TESTING_MENU is not set CONFIG_DEBUG_WX=y CONFIG_DEBUG_USER=y +# CONFIG_RUNTIME_TESTING_MENU is not set diff --git a/arch/arm/configs/aspeed_g5_defconfig b/arch/arm/configs/aspeed_g5_defconfig index 597536cc9573..b0d056d49abe 100644 --- a/arch/arm/configs/aspeed_g5_defconfig +++ b/arch/arm/configs/aspeed_g5_defconfig @@ -139,6 +139,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=6 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_ASPEED_VUART=y CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DW=y CONFIG_SERIAL_OF_PLATFORM=y CONFIG_ASPEED_KCS_IPMI_BMC=y CONFIG_ASPEED_BT_IPMI_BMC=y @@ -154,6 +155,7 @@ CONFIG_SPI=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_ASPEED=y +CONFIG_GPIO_ASPEED_SGPIO=y CONFIG_W1=y CONFIG_W1_MASTER_GPIO=y CONFIG_W1_SLAVE_THERM=y @@ -236,8 +238,10 @@ CONFIG_FSI=y CONFIG_FSI_MASTER_GPIO=y CONFIG_FSI_MASTER_HUB=y CONFIG_FSI_MASTER_AST_CF=y +CONFIG_FSI_MASTER_ASPEED=y CONFIG_FSI_SCOM=y CONFIG_FSI_SBEFIFO=y +CONFIG_FSI_OCC=y CONFIG_FANOTIFY=y CONFIG_OVERLAY_FS=y CONFIG_TMPFS=y diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index 309c55a8d107..3729a6e0ee24 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -18,6 +18,7 @@ CONFIG_ARCH_MULTI_V5=y CONFIG_ARCH_AT91=y CONFIG_SOC_AT91RM9200=y CONFIG_SOC_AT91SAM9=y +# CONFIG_ATMEL_CLOCKSOURCE_PIT is not set CONFIG_AEABI=y CONFIG_UACCESS_WITH_MEMCPY=y CONFIG_ZBOOT_ROM_TEXT=0x0 diff --git a/arch/arm/configs/axm55xx_defconfig b/arch/arm/configs/axm55xx_defconfig index 31bfe1647d28..f53634af014b 100644 --- a/arch/arm/configs/axm55xx_defconfig +++ b/arch/arm/configs/axm55xx_defconfig @@ -20,7 +20,6 @@ CONFIG_NAMESPACES=y CONFIG_SCHED_AUTOGROUP=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y -CONFIG_SYSCTL_SYSCALL=y CONFIG_EMBEDDED=y # CONFIG_COMPAT_BRK is not set CONFIG_PROFILING=y diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 08db1c83eb2d..e7e4bb5ad8d5 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -230,6 +230,7 @@ CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994=y CONFIG_SND_SOC_SMDK_WM8994_PCM=y CONFIG_SND_SOC_SNOW=y CONFIG_SND_SOC_ODROID=y +CONFIG_SND_SOC_ARNDALE=y CONFIG_SND_SIMPLE_CARD=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y @@ -294,6 +295,7 @@ CONFIG_DEVFREQ_GOV_PERFORMANCE=y CONFIG_DEVFREQ_GOV_POWERSAVE=y CONFIG_DEVFREQ_GOV_USERSPACE=y CONFIG_ARM_EXYNOS_BUS_DEVFREQ=y +CONFIG_EXYNOS5422_DMC=y CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=y CONFIG_EXTCON=y CONFIG_EXTCON_MAX14577=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 0f7381ee0c37..26d6dee67aa6 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -179,6 +179,7 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=y +CONFIG_TOUCHSCREEN_DA9052=y CONFIG_TOUCHSCREEN_EGALAX=y CONFIG_TOUCHSCREEN_GOODIX=y CONFIG_TOUCHSCREEN_MAX11801=y @@ -236,6 +237,7 @@ CONFIG_DA9062_WATCHDOG=y CONFIG_DA9063_WATCHDOG=m CONFIG_RN5T618_WATCHDOG=y CONFIG_IMX2_WDT=y +CONFIG_IMX7ULP_WDT=y CONFIG_MFD_DA9052_I2C=y CONFIG_MFD_DA9062=y CONFIG_MFD_DA9063=y @@ -335,7 +337,7 @@ CONFIG_NOP_USB_XCEIV=y CONFIG_USB_MXS_PHY=y CONFIG_USB_GADGET=y CONFIG_USB_FSL_USB2=y -CONFIG_USB_CONFIGFS=m +CONFIG_USB_CONFIGFS=y CONFIG_USB_CONFIGFS_SERIAL=y CONFIG_USB_CONFIGFS_ACM=y CONFIG_USB_CONFIGFS_OBEX=y diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig index 3d5f5b501330..11e2211f9007 100644 --- a/arch/arm/configs/keystone_defconfig +++ b/arch/arm/configs/keystone_defconfig @@ -11,7 +11,6 @@ CONFIG_CGROUP_CPUACCT=y CONFIG_CGROUP_SCHED=y CONFIG_BLK_CGROUP=y CONFIG_BLK_DEV_INITRD=y -CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS_ALL=y # CONFIG_ELF_CORE is not set # CONFIG_BASE_FULL is not set @@ -135,6 +134,7 @@ CONFIG_BLK_DEV_SD=y CONFIG_NETDEVICES=y CONFIG_TI_KEYSTONE_NETCP=y CONFIG_TI_KEYSTONE_NETCP_ETHSS=y +CONFIG_TI_CPTS=y CONFIG_MARVELL_PHY=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig index 09deb57db942..989bcc84e7fb 100644 --- a/arch/arm/configs/lpc32xx_defconfig +++ b/arch/arm/configs/lpc32xx_defconfig @@ -9,7 +9,6 @@ CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL_SYSCALL=y CONFIG_EMBEDDED=y CONFIG_SLAB=y # CONFIG_ARCH_MULTI_V7 is not set diff --git a/arch/arm/configs/moxart_defconfig b/arch/arm/configs/moxart_defconfig index 9b98761e51c9..45d27190c9c9 100644 --- a/arch/arm/configs/moxart_defconfig +++ b/arch/arm/configs/moxart_defconfig @@ -4,7 +4,6 @@ CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y -CONFIG_SYSCTL_SYSCALL=y # CONFIG_ELF_CORE is not set # CONFIG_BASE_FULL is not set # CONFIG_SIGNALFD is not set diff --git a/arch/arm/configs/multi_v4t_defconfig b/arch/arm/configs/multi_v4t_defconfig index 0b42bddfbc82..e530107be412 100644 --- a/arch/arm/configs/multi_v4t_defconfig +++ b/arch/arm/configs/multi_v4t_defconfig @@ -4,22 +4,19 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_EMBEDDED=y CONFIG_SLOB=y -CONFIG_JUMP_LABEL=y -CONFIG_PARTITION_ADVANCED=y -# CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_MULTI_V4T=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_AT91=y CONFIG_SOC_AT91RM9200=y CONFIG_ARCH_CLPS711X=y +CONFIG_ARCH_MXC=y +CONFIG_SOC_IMX1=y CONFIG_ARCH_INTEGRATOR=y CONFIG_ARCH_INTEGRATOR_AP=y CONFIG_INTEGRATOR_IMPD1=y CONFIG_INTEGRATOR_CM720T=y CONFIG_INTEGRATOR_CM920T=y CONFIG_INTEGRATOR_CM922T_XA10=y -CONFIG_ARCH_MXC=y -CONFIG_SOC_IMX1=y CONFIG_ARCH_NSPIRE=y CONFIG_AEABI=y # CONFIG_ATAGS is not set @@ -28,6 +25,8 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CPU_IDLE=y CONFIG_ARM_CPUIDLE=y CONFIG_ARM_CLPS711X_CPUIDLE=y +CONFIG_JUMP_LABEL=y +CONFIG_PARTITION_ADVANCED=y # CONFIG_COREDUMP is not set CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y @@ -81,7 +80,6 @@ CONFIG_FB=y CONFIG_FB_CLPS711X=y CONFIG_FB_IMX=y CONFIG_LCD_PLATFORM=y -CONFIG_BACKLIGHT_PWM=y # CONFIG_USB_SUPPORT is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -92,12 +90,11 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_PWM=y CONFIG_PWM_ATMEL=y CONFIG_PWM_CLPS711X=y -CONFIG_PWM_IMX=y CONFIG_EXT2_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_CRAMFS=y CONFIG_MINIX_FS=y +CONFIG_CRC_CCITT=y # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y -CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig index bd018873e47a..2724fb3155cd 100644 --- a/arch/arm/configs/multi_v5_defconfig +++ b/arch/arm/configs/multi_v5_defconfig @@ -1,14 +1,11 @@ CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_LOG_BUF_SHIFT=19 CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y CONFIG_PROFILING=y -CONFIG_OPROFILE=y -CONFIG_KPROBES=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_ASPEED=y CONFIG_MACH_ASPEED_G4=y @@ -59,8 +56,6 @@ CONFIG_MACH_RD88F5181L_GE=y CONFIG_MACH_RD88F5181L_FXO=y CONFIG_MACH_RD88F6183AP_GE=y CONFIG_ARCH_U300=y -CONFIG_PCI_MVEBU=y -CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 @@ -72,6 +67,10 @@ CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_IDLE=y CONFIG_ARM_KIRKWOOD_CPUIDLE=y +CONFIG_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -84,6 +83,7 @@ CONFIG_NET_DSA=y CONFIG_NET_PKTGEN=m CONFIG_CFG80211=y CONFIG_MAC80211=y +CONFIG_PCI_MVEBU=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_IMX_WEIM=y @@ -165,6 +165,7 @@ CONFIG_SPI_ATMEL=y CONFIG_SPI_IMX=y CONFIG_SPI_ORION=y CONFIG_GPIO_ASPEED=m +CONFIG_GPIO_ASPEED_SGPIO=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_QNAP=y @@ -186,7 +187,6 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_V4L_PLATFORM_DRIVERS=y -CONFIG_SOC_CAMERA=y CONFIG_VIDEO_ASPEED=m CONFIG_VIDEO_ATMEL_ISI=m CONFIG_DRM=y @@ -241,6 +241,9 @@ CONFIG_USB_ASPEED_VHUB=m CONFIG_USB_CONFIGFS=m CONFIG_MMC=y CONFIG_SDIO_UART=y +CONFIG_MMC_SDHCI=m +CONFIG_MMC_SDHCI_PLTFM=m +CONFIG_MMC_SDHCI_OF_ASPEED=m CONFIG_MMC_ATMELMCI=y CONFIG_MMC_MVSDIO=y CONFIG_NEW_LEDS=y @@ -263,7 +266,6 @@ CONFIG_DMADEVICES=y CONFIG_AT_HDMAC=y CONFIG_MV_XOR=y CONFIG_STAGING=y -CONFIG_FB_XGI=y CONFIG_ASPEED_LPC_CTRL=m CONFIG_ASPEED_LPC_SNOOP=m CONFIG_ASPEED_P2A_CTRL=m @@ -292,6 +294,11 @@ CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_2=y CONFIG_NLS_UTF8=y +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_DEV_MARVELL_CESA=y +CONFIG_CRC_CCITT=y +CONFIG_LIBCRC32C=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y @@ -300,8 +307,3 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_PREEMPT is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_DEV_MARVELL_CESA=y -CONFIG_CRC_CCITT=y -CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index e4c8def9a0a5..3f1b96dc7faa 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -53,6 +53,9 @@ CONFIG_ARCH_MEDIATEK=y CONFIG_ARCH_MESON=y CONFIG_ARCH_MILBEAUT=y CONFIG_ARCH_MILBEAUT_M10V=y +CONFIG_ARCH_MMP=y +CONFIG_MACH_MMP2_DT=y +CONFIG_MACH_MMP3_DT=y CONFIG_ARCH_MVEBU=y CONFIG_MACH_ARMADA_370=y CONFIG_MACH_ARMADA_375=y @@ -128,8 +131,6 @@ CONFIG_CRYPTO_AES_ARM_CE=m CONFIG_CRYPTO_GHASH_ARM_CE=m CONFIG_CRYPTO_CRC32_ARM_CE=m CONFIG_CRYPTO_CHACHA20_NEON=m -CONFIG_GCC_PLUGINS=y -CONFIG_GCC_PLUGIN_STRUCTLEAK=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_PARTITION_ADVANCED=y @@ -168,13 +169,20 @@ CONFIG_MAC80211=m CONFIG_RFKILL=y CONFIG_RFKILL_INPUT=y CONFIG_RFKILL_GPIO=y +CONFIG_NFC=m +CONFIG_NFC_DIGITAL=m +CONFIG_NFC_NCI=m +CONFIG_NFC_NCI_SPI=m +CONFIG_NFC_NCI_UART=m +CONFIG_NFC_HCI=m +CONFIG_NFC_SHDLC=y +CONFIG_NFC_S3FWRN5_I2C=m CONFIG_PCIEPORTBUS=y CONFIG_PCI_MVEBU=y CONFIG_PCI_TEGRA=y CONFIG_PCI_RCAR_GEN2=y CONFIG_PCIE_RCAR=y CONFIG_PCI_DRA7XX_EP=y -CONFIG_PCI_KEYSTONE=y CONFIG_PCI_ENDPOINT=y CONFIG_PCI_ENDPOINT_CONFIGFS=y CONFIG_PCI_EPF_TEST=m @@ -189,15 +197,14 @@ CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_M25P80=y CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_DENALI_DT=y CONFIG_MTD_NAND_OMAP2=y CONFIG_MTD_NAND_OMAP_BCH=y CONFIG_MTD_NAND_ATMEL=y CONFIG_MTD_NAND_MARVELL=y -CONFIG_MTD_NAND_GPMI_NAND=y CONFIG_MTD_NAND_BRCMNAND=y +CONFIG_MTD_NAND_GPMI_NAND=y CONFIG_MTD_NAND_VF610_NFC=y CONFIG_MTD_NAND_DAVINCI=y CONFIG_MTD_NAND_STM32_FMC2=y @@ -244,6 +251,7 @@ CONFIG_BGMAC_BCMA=y CONFIG_SYSTEMPORT=m CONFIG_MACB=y CONFIG_NET_CALXEDA_XGMAC=y +CONFIG_FTGMAC100=m CONFIG_GIANFAR=y CONFIG_HIX5HD2_GMAC=y CONFIG_E1000E=y @@ -260,11 +268,11 @@ CONFIG_STMMAC_ETH=y CONFIG_DWMAC_DWC_QOS_ETH=y CONFIG_TI_CPSW=y CONFIG_XILINX_EMACLITE=y -CONFIG_AT803X_PHY=y CONFIG_BROADCOM_PHY=y CONFIG_ICPLUS_PHY=y CONFIG_MARVELL_PHY=y CONFIG_MICREL_PHY=y +CONFIG_AT803X_PHY=y CONFIG_ROCKCHIP_PHY=y CONFIG_SMSC_PHY=y CONFIG_USB_PEGASUS=y @@ -283,6 +291,7 @@ CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_QT1070=m CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_TEGRA=y +CONFIG_KEYBOARD_PXA27x=m CONFIG_KEYBOARD_SAMSUNG=m CONFIG_KEYBOARD_ST_KEYSCAN=y CONFIG_KEYBOARD_SPEAR=y @@ -377,7 +386,6 @@ CONFIG_I2C_DAVINCI=y CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_DIGICOLOR=m CONFIG_I2C_EMEV2=m -CONFIG_I2C_GPIO=m CONFIG_I2C_IMX=y CONFIG_I2C_MESON=y CONFIG_I2C_MV64XXX=y @@ -437,6 +445,7 @@ CONFIG_PINCTRL_MSM8X74=y CONFIG_PINCTRL_MSM8916=y CONFIG_PINCTRL_QCOM_SPMI_PMIC=y CONFIG_PINCTRL_QCOM_SSBI_PMIC=y +CONFIG_GPIO_ASPEED_SGPIO=y CONFIG_GPIO_DAVINCI=y CONFIG_GPIO_DWAPB=y CONFIG_GPIO_EM=y @@ -467,8 +476,8 @@ CONFIG_BATTERY_BQ27XXX=m CONFIG_AXP20X_POWER=m CONFIG_BATTERY_MAX17040=m CONFIG_BATTERY_MAX17042=m -CONFIG_CHARGER_GPIO=m CONFIG_CHARGER_CPCAP=m +CONFIG_CHARGER_GPIO=m CONFIG_CHARGER_MAX14577=m CONFIG_CHARGER_MAX77693=m CONFIG_CHARGER_MAX8997=m @@ -491,12 +500,12 @@ CONFIG_BCM2835_THERMAL=m CONFIG_BRCMSTB_THERMAL=m CONFIG_ST_THERMAL_MEMMAP=y CONFIG_UNIPHIER_THERMAL=y -CONFIG_WATCHDOG=y CONFIG_DA9063_WATCHDOG=m CONFIG_XILINX_WATCHDOG=y CONFIG_ARM_SP805_WATCHDOG=y CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_SAMA5D4_WATCHDOG=y +CONFIG_S3C2410_WATCHDOG=m CONFIG_DW_WATCHDOG=y CONFIG_DAVINCI_WATCHDOG=m CONFIG_ORION_WATCHDOG=y @@ -525,10 +534,6 @@ CONFIG_MFD_BCM590XX=y CONFIG_MFD_AC100=y CONFIG_MFD_AXP20X_I2C=y CONFIG_MFD_AXP20X_RSB=y -CONFIG_MFD_CROS_EC=m -CONFIG_CROS_EC_I2C=m -CONFIG_CROS_EC_SPI=m -CONFIG_MFD_CROS_EC_CHARDEV=m CONFIG_MFD_DA9063=m CONFIG_MFD_MAX14577=y CONFIG_MFD_MAX77686=y @@ -581,6 +586,7 @@ CONFIG_REGULATOR_QCOM_RPM=y CONFIG_REGULATOR_QCOM_SMD_RPM=m CONFIG_REGULATOR_RK808=y CONFIG_REGULATOR_RN5T618=y +CONFIG_REGULATOR_S2MPA01=m CONFIG_REGULATOR_S2MPS11=y CONFIG_REGULATOR_S5M8767=y CONFIG_REGULATOR_STM32_BOOSTER=m @@ -605,6 +611,7 @@ CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=m CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_VIDEO_MMP_CAMERA=m CONFIG_VIDEO_ASPEED=m CONFIG_VIDEO_STM32_DCMI=m CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m @@ -628,7 +635,6 @@ CONFIG_V4L_TEST_DRIVERS=y CONFIG_VIDEO_VIVID=m CONFIG_CEC_PLATFORM_DRIVERS=y CONFIG_VIDEO_SAMSUNG_S5P_CEC=m -# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set CONFIG_VIDEO_ADV7180=m CONFIG_VIDEO_ML86V7667=m CONFIG_DRM=y @@ -681,7 +687,6 @@ CONFIG_FB_EFI=y CONFIG_FB_WM8505=y CONFIG_FB_SH_MOBILE_LCDC=y CONFIG_FB_SIMPLE=y -CONFIG_LCD_PLATFORM=m CONFIG_BACKLIGHT_PWM=y CONFIG_BACKLIGHT_AS3711=y CONFIG_BACKLIGHT_GPIO=y @@ -702,6 +707,9 @@ CONFIG_SND_ATMEL_SOC_PDMIC=m CONFIG_SND_ATMEL_SOC_I2S=m CONFIG_SND_BCM2835_SOC_I2S=m CONFIG_SND_SOC_FSL_SAI=m +CONFIG_SND_MMP_SOC=y +CONFIG_SND_PXA_SOC_SSP=m +CONFIG_SND_PXA910_SOC=m CONFIG_SND_SOC_ROCKCHIP=m CONFIG_SND_SOC_ROCKCHIP_SPDIF=m CONFIG_SND_SOC_ROCKCHIP_MAX98090=m @@ -711,9 +719,12 @@ CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994=m CONFIG_SND_SOC_SMDK_WM8994_PCM=m CONFIG_SND_SOC_SNOW=m CONFIG_SND_SOC_ODROID=m +CONFIG_SND_SOC_ARNDALE=m CONFIG_SND_SOC_SH4_FSI=m CONFIG_SND_SOC_RCAR=m CONFIG_SND_SOC_STI=m +CONFIG_SND_SOC_STM32_SAI=m +CONFIG_SND_SOC_STM32_I2S=m CONFIG_SND_SUN4I_CODEC=m CONFIG_SND_SOC_TEGRA=m CONFIG_SND_SOC_TEGRA20_I2S=m @@ -727,10 +738,12 @@ CONFIG_SND_SOC_TEGRA_ALC5632=m CONFIG_SND_SOC_TEGRA_MAX98090=m CONFIG_SND_SOC_AK4642=m CONFIG_SND_SOC_CPCAP=m +CONFIG_SND_SOC_CS42L51_I2C=m CONFIG_SND_SOC_SGTL5000=m CONFIG_SND_SOC_SPDIF=m CONFIG_SND_SOC_STI_SAS=m CONFIG_SND_SOC_WM8978=m +CONFIG_SND_AUDIO_GRAPH_CARD=m CONFIG_USB=y CONFIG_USB_OTG=y CONFIG_USB_XHCI_HCD=y @@ -740,6 +753,7 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_HCD_STI=y CONFIG_USB_EHCI_TEGRA=y CONFIG_USB_EHCI_EXYNOS=y +CONFIG_USB_EHCI_MV=m CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_STI=y CONFIG_USB_OHCI_EXYNOS=m @@ -810,6 +824,7 @@ CONFIG_MMC_SDHCI_DOVE=y CONFIG_MMC_SDHCI_TEGRA=y CONFIG_MMC_SDHCI_S3C=y CONFIG_MMC_SDHCI_PXAV3=y +CONFIG_MMC_SDHCI_PXAV2=m CONFIG_MMC_SDHCI_SPEAR=y CONFIG_MMC_SDHCI_S3C_DMA=y CONFIG_MMC_SDHCI_BCM_KONA=y @@ -875,6 +890,7 @@ CONFIG_RTC_DRV_DA9063=m CONFIG_RTC_DRV_EFI=m CONFIG_RTC_DRV_DIGICOLOR=m CONFIG_RTC_DRV_S3C=m +CONFIG_RTC_DRV_SA1100=m CONFIG_RTC_DRV_PL031=y CONFIG_RTC_DRV_AT91RM9200=m CONFIG_RTC_DRV_AT91SAM9=m @@ -919,6 +935,9 @@ CONFIG_SERIO_NVEC_PS2=y CONFIG_NVEC_POWER=y CONFIG_NVEC_PAZ00=y CONFIG_STAGING_BOARD=y +CONFIG_MFD_CROS_EC=m +CONFIG_CROS_EC_I2C=m +CONFIG_CROS_EC_SPI=m CONFIG_COMMON_CLK_MAX77686=y CONFIG_COMMON_CLK_RK808=m CONFIG_COMMON_CLK_S2MPS11=m @@ -933,6 +952,7 @@ CONFIG_BCM2835_MBOX=y CONFIG_ROCKCHIP_IOMMU=y CONFIG_TEGRA_IOMMU_GART=y CONFIG_TEGRA_IOMMU_SMMU=y +CONFIG_EXYNOS_IOMMU=y CONFIG_REMOTEPROC=y CONFIG_ST_REMOTEPROC=m CONFIG_RPMSG_VIRTIO=m @@ -967,8 +987,14 @@ CONFIG_ARCH_TEGRA_2x_SOC=y CONFIG_ARCH_TEGRA_3x_SOC=y CONFIG_ARCH_TEGRA_114_SOC=y CONFIG_ARCH_TEGRA_124_SOC=y +CONFIG_ARM_EXYNOS_BUS_DEVFREQ=m CONFIG_ARM_TEGRA_DEVFREQ=m +CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=m +CONFIG_EXTCON_MAX14577=m +CONFIG_EXTCON_MAX77693=m +CONFIG_EXTCON_MAX8997=m CONFIG_TI_AEMIF=y +CONFIG_EXYNOS5422_DMC=m CONFIG_IIO=y CONFIG_IIO_SW_TRIGGER=y CONFIG_ASPEED_ADC=m @@ -978,16 +1004,15 @@ CONFIG_BERLIN2_ADC=m CONFIG_CPCAP_ADC=m CONFIG_EXYNOS_ADC=m CONFIG_MESON_SARADC=m +CONFIG_ROCKCHIP_SARADC=m CONFIG_STM32_ADC_CORE=m CONFIG_STM32_ADC=m CONFIG_STM32_DFSDM_ADC=m CONFIG_VF610_ADC=m CONFIG_XILINX_XADC=y -CONFIG_STM32_LPTIMER_CNT=m -CONFIG_STM32_DAC=m -CONFIG_ROCKCHIP_SARADC=m CONFIG_IIO_CROS_EC_SENSORS_CORE=m CONFIG_IIO_CROS_EC_SENSORS=m +CONFIG_STM32_DAC=m CONFIG_MPU3050_I2C=y CONFIG_CM36651=m CONFIG_IIO_CROS_EC_LIGHT_PROX=m @@ -1020,12 +1045,14 @@ CONFIG_PHY_SUN9I_USB=y CONFIG_PHY_HIX5HD2_SATA=y CONFIG_PHY_BERLIN_SATA=y CONFIG_PHY_BERLIN_USB=y +CONFIG_PHY_MMP3_USB=m CONFIG_PHY_CPCAP_USB=m CONFIG_PHY_QCOM_APQ8064_SATA=m CONFIG_PHY_RCAR_GEN2=m CONFIG_PHY_ROCKCHIP_DP=m CONFIG_PHY_ROCKCHIP_USB=y CONFIG_PHY_SAMSUNG_USB2=m +CONFIG_PHY_EXYNOS5250_SATA=m CONFIG_PHY_UNIPHIER_USB2=y CONFIG_PHY_UNIPHIER_USB3=y CONFIG_PHY_MIPHY28LP=y @@ -1036,11 +1063,18 @@ CONFIG_PHY_DM816X_USB=m CONFIG_OMAP_USB2=y CONFIG_TI_PIPE3=y CONFIG_TWL4030_USB=m -CONFIG_MESON_MX_EFUSE=m -CONFIG_ROCKCHIP_EFUSE=m CONFIG_NVMEM_IMX_OCOTP=y +CONFIG_ROCKCHIP_EFUSE=m CONFIG_NVMEM_SUNXI_SID=y CONFIG_NVMEM_VF610_OCOTP=y +CONFIG_MESON_MX_EFUSE=m +CONFIG_FSI=m +CONFIG_FSI_MASTER_GPIO=m +CONFIG_FSI_MASTER_HUB=m +CONFIG_FSI_MASTER_ASPEED=m +CONFIG_FSI_SCOM=m +CONFIG_FSI_SBEFIFO=m +CONFIG_FSI_OCC=m CONFIG_EXT4_FS=y CONFIG_AUTOFS4_FS=y CONFIG_MSDOS_FS=y @@ -1067,14 +1101,15 @@ CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=m CONFIG_CRYPTO_USER_API_RNG=m CONFIG_CRYPTO_USER_API_AEAD=m +CONFIG_CRYPTO_DEV_SUN4I_SS=m CONFIG_CRYPTO_DEV_MARVELL_CESA=m CONFIG_CRYPTO_DEV_EXYNOS_RNG=m CONFIG_CRYPTO_DEV_S5P=m CONFIG_CRYPTO_DEV_ATMEL_AES=m CONFIG_CRYPTO_DEV_ATMEL_TDES=m CONFIG_CRYPTO_DEV_ATMEL_SHA=m -CONFIG_CRYPTO_DEV_SUN4I_SS=m CONFIG_CRYPTO_DEV_ROCKCHIP=m CONFIG_CMA_SIZE_MBYTES=64 CONFIG_PRINTK_TIME=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 89cce8d4bc6b..8c37cc8ab6f2 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -128,7 +128,6 @@ CONFIG_PCI_ENDPOINT_CONFIGFS=y CONFIG_PCI_EPF_TEST=m CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y -CONFIG_DMA_CMA=y CONFIG_OMAP_OCP2SCP=y CONFIG_CONNECTOR=m CONFIG_MTD=y @@ -343,18 +342,16 @@ CONFIG_VIDEO_OMAP3=m CONFIG_CEC_PLATFORM_DRIVERS=y # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set CONFIG_VIDEO_TVP5150=m +CONFIG_VIDEO_MT9P031=m CONFIG_DRM=m CONFIG_DRM_OMAP=m CONFIG_OMAP5_DSS_HDMI=y CONFIG_OMAP2_DSS_SDI=y CONFIG_OMAP2_DSS_DSI=y CONFIG_DRM_OMAP_ENCODER_OPA362=m -CONFIG_DRM_OMAP_ENCODER_TFP410=m CONFIG_DRM_OMAP_ENCODER_TPD12S015=m -CONFIG_DRM_OMAP_CONNECTOR_DVI=m CONFIG_DRM_OMAP_CONNECTOR_HDMI=m CONFIG_DRM_OMAP_CONNECTOR_ANALOG_TV=m -CONFIG_DRM_OMAP_PANEL_DPI=m CONFIG_DRM_OMAP_PANEL_DSI_CM=m CONFIG_DRM_TILCDC=m CONFIG_DRM_PANEL_SIMPLE=m @@ -539,11 +536,16 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_SECURITY=y CONFIG_CRYPTO_MICHAEL_MIC=y +CONFIG_CRYPTO_DEV_OMAP=m +CONFIG_CRYPTO_DEV_OMAP_SHAM=m +CONFIG_CRYPTO_DEV_OMAP_AES=m +CONFIG_CRYPTO_DEV_OMAP_DES=m CONFIG_CRC_CCITT=y CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=y CONFIG_CRC7=y CONFIG_LIBCRC32C=y +CONFIG_DMA_CMA=y CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index 02f1e7b7c8f6..4dd1d8ca4455 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -5,7 +5,6 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y -CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y # CONFIG_SLUB_DEBUG is not set @@ -226,6 +225,7 @@ CONFIG_QCOM_WCNSS_PIL=y CONFIG_RPMSG_CHAR=y CONFIG_RPMSG_QCOM_SMD=y CONFIG_QCOM_GSBI=y +CONFIG_QCOM_OCMEM=y CONFIG_QCOM_PM=y CONFIG_QCOM_SMEM=y CONFIG_QCOM_SMD_RPM=y diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index ef785340e6f8..27f6135c4ee7 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -20,6 +20,7 @@ CONFIG_ARCH_AT91=y CONFIG_SOC_SAMA5D2=y CONFIG_SOC_SAMA5D3=y CONFIG_SOC_SAMA5D4=y +# CONFIG_ATMEL_CLOCKSOURCE_PIT is not set CONFIG_AEABI=y CONFIG_UACCESS_WITH_MEMCPY=y CONFIG_ZBOOT_ROM_TEXT=0x0 diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index c6c70355141c..bda57cafa2bc 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -9,7 +9,6 @@ CONFIG_PERF_EVENTS=y CONFIG_SLAB=y CONFIG_ARCH_RENESAS=y CONFIG_PL310_ERRATA_588369=y -CONFIG_ARM_ERRATA_754322=y CONFIG_SMP=y CONFIG_SCHED_MC=y CONFIG_NR_CPUS=8 @@ -50,7 +49,6 @@ CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_M25P80=y CONFIG_MTD_SPI_NOR=y CONFIG_EEPROM_AT24=y CONFIG_BLK_DEV_SD=y @@ -130,7 +128,6 @@ CONFIG_DRM_SII902X=y CONFIG_DRM_I2C_ADV7511=y CONFIG_DRM_I2C_ADV7511_AUDIO=y CONFIG_FB_SH_MOBILE_LCDC=y -# CONFIG_LCD_CLASS_DEVICE is not set # CONFIG_BACKLIGHT_GENERIC is not set CONFIG_BACKLIGHT_PWM=y CONFIG_BACKLIGHT_AS3711=y diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index df433abfcb02..3f5d727efc41 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -56,6 +56,7 @@ CONFIG_SUN4I_EMAC=y CONFIG_STMMAC_ETH=y # CONFIG_NET_VENDOR_VIA is not set # CONFIG_NET_VENDOR_WIZNET is not set +CONFIG_MICREL_PHY=y # CONFIG_WLAN is not set CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_SUN4I_LRADC=y @@ -150,4 +151,6 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_FS=y +CONFIG_CRYPTO_DEV_ALLWINNER=y +CONFIG_CRYPTO_DEV_SUN8I_CE=y CONFIG_CRYPTO_DEV_SUN4I_SS=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index 8f5c6a5b444c..a27592d3b1fa 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -250,6 +250,8 @@ CONFIG_KEYBOARD_NVEC=y CONFIG_SERIO_NVEC_PS2=y CONFIG_NVEC_POWER=y CONFIG_NVEC_PAZ00=y +CONFIG_STAGING_MEDIA=y +CONFIG_TEGRA_VDE=y CONFIG_TEGRA_IOMMU_GART=y CONFIG_TEGRA_IOMMU_SMMU=y CONFIG_ARCH_TEGRA_2x_SOC=y diff --git a/arch/arm/configs/zx_defconfig b/arch/arm/configs/zx_defconfig index c4070c19ea6c..4d2ef785ed34 100644 --- a/arch/arm/configs/zx_defconfig +++ b/arch/arm/configs/zx_defconfig @@ -11,7 +11,6 @@ CONFIG_RT_GROUP_SCHED=y CONFIG_NAMESPACES=y CONFIG_USER_NS=y CONFIG_BLK_DEV_INITRD=y -CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y diff --git a/arch/arm/crypto/chacha-glue.c b/arch/arm/crypto/chacha-glue.c index 3f0c057aa050..6ebbb2b241d2 100644 --- a/arch/arm/crypto/chacha-glue.c +++ b/arch/arm/crypto/chacha-glue.c @@ -286,11 +286,13 @@ static struct skcipher_alg neon_algs[] = { static int __init chacha_simd_mod_init(void) { - int err; + int err = 0; - err = crypto_register_skciphers(arm_algs, ARRAY_SIZE(arm_algs)); - if (err) - return err; + if (IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER)) { + err = crypto_register_skciphers(arm_algs, ARRAY_SIZE(arm_algs)); + if (err) + return err; + } if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && (elf_hwcap & HWCAP_NEON)) { int i; @@ -310,18 +312,22 @@ static int __init chacha_simd_mod_init(void) static_branch_enable(&use_neon); } - err = crypto_register_skciphers(neon_algs, ARRAY_SIZE(neon_algs)); - if (err) - crypto_unregister_skciphers(arm_algs, ARRAY_SIZE(arm_algs)); + if (IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER)) { + err = crypto_register_skciphers(neon_algs, ARRAY_SIZE(neon_algs)); + if (err) + crypto_unregister_skciphers(arm_algs, ARRAY_SIZE(arm_algs)); + } } return err; } static void __exit chacha_simd_mod_fini(void) { - crypto_unregister_skciphers(arm_algs, ARRAY_SIZE(arm_algs)); - if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && (elf_hwcap & HWCAP_NEON)) - crypto_unregister_skciphers(neon_algs, ARRAY_SIZE(neon_algs)); + if (IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER)) { + crypto_unregister_skciphers(arm_algs, ARRAY_SIZE(arm_algs)); + if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && (elf_hwcap & HWCAP_NEON)) + crypto_unregister_skciphers(neon_algs, ARRAY_SIZE(neon_algs)); + } } module_init(chacha_simd_mod_init); diff --git a/arch/arm/crypto/curve25519-glue.c b/arch/arm/crypto/curve25519-glue.c index 2e9e12d2f642..f3f42cf3b893 100644 --- a/arch/arm/crypto/curve25519-glue.c +++ b/arch/arm/crypto/curve25519-glue.c @@ -108,14 +108,15 @@ static int __init mod_init(void) { if (elf_hwcap & HWCAP_NEON) { static_branch_enable(&have_neon); - return crypto_register_kpp(&curve25519_alg); + return IS_REACHABLE(CONFIG_CRYPTO_KPP) ? + crypto_register_kpp(&curve25519_alg) : 0; } return 0; } static void __exit mod_exit(void) { - if (elf_hwcap & HWCAP_NEON) + if (IS_REACHABLE(CONFIG_CRYPTO_KPP) && elf_hwcap & HWCAP_NEON) crypto_unregister_kpp(&curve25519_alg); } diff --git a/arch/arm/crypto/poly1305-glue.c b/arch/arm/crypto/poly1305-glue.c index 74a725ac89c9..abe3f2d587dc 100644 --- a/arch/arm/crypto/poly1305-glue.c +++ b/arch/arm/crypto/poly1305-glue.c @@ -249,16 +249,19 @@ static int __init arm_poly1305_mod_init(void) if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && (elf_hwcap & HWCAP_NEON)) static_branch_enable(&have_neon); - else + else if (IS_REACHABLE(CONFIG_CRYPTO_HASH)) /* register only the first entry */ return crypto_register_shash(&arm_poly1305_algs[0]); - return crypto_register_shashes(arm_poly1305_algs, - ARRAY_SIZE(arm_poly1305_algs)); + return IS_REACHABLE(CONFIG_CRYPTO_HASH) ? + crypto_register_shashes(arm_poly1305_algs, + ARRAY_SIZE(arm_poly1305_algs)) : 0; } static void __exit arm_poly1305_mod_exit(void) { + if (!IS_REACHABLE(CONFIG_CRYPTO_HASH)) + return; if (!static_branch_likely(&have_neon)) { crypto_unregister_shash(&arm_poly1305_algs[0]); return; diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index 68ca86f85eb7..fa579b23b4df 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -12,7 +12,6 @@ generic-y += local.h generic-y += local64.h generic-y += mm-arch-hooks.h generic-y += mmiowb.h -generic-y += msi.h generic-y += parport.h generic-y += preempt.h generic-y += seccomp.h diff --git a/arch/arm/include/asm/arch_gicv3.h b/arch/arm/include/asm/arch_gicv3.h index 0555f14cc8be..fa50bb04f580 100644 --- a/arch/arm/include/asm/arch_gicv3.h +++ b/arch/arm/include/asm/arch_gicv3.h @@ -333,7 +333,7 @@ static inline u64 __gic_readq_nonatomic(const volatile void __iomem *addr) * GITS_VPENDBASER - the Valid bit must be cleared before changing * anything else. */ -static inline void gits_write_vpendbaser(u64 val, void * __iomem addr) +static inline void gits_write_vpendbaser(u64 val, void __iomem *addr) { u32 tmp; diff --git a/arch/arm/include/asm/dma-direct.h b/arch/arm/include/asm/dma-direct.h index b67e5fc1fe43..7c3001a6a775 100644 --- a/arch/arm/include/asm/dma-direct.h +++ b/arch/arm/include/asm/dma-direct.h @@ -14,23 +14,4 @@ static inline phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dev_addr) return __pfn_to_phys(dma_to_pfn(dev, dev_addr)) + offset; } -static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size) -{ - u64 limit, mask; - - if (!dev->dma_mask) - return 0; - - mask = *dev->dma_mask; - - limit = (mask + 1) & ~mask; - if (limit && size > limit) - return 0; - - if ((addr | (addr + size - 1)) & ~mask) - return 0; - - return 1; -} - #endif /* ASM_ARM_DMA_DIRECT_H */ diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h index 18b0197f2384..48ec1d0337da 100644 --- a/arch/arm/include/asm/ftrace.h +++ b/arch/arm/include/asm/ftrace.h @@ -11,7 +11,6 @@ #define MCOUNT_INSN_SIZE 4 /* sizeof mcount call */ #ifndef __ASSEMBLY__ -extern void mcount(void); extern void __gnu_mcount_nc(void); #ifdef CONFIG_DYNAMIC_FTRACE @@ -23,9 +22,6 @@ static inline unsigned long ftrace_call_adjust(unsigned long addr) /* With Thumb-2, the recorded addresses have the lsb set */ return addr & ~1; } - -extern void ftrace_caller_old(void); -extern void ftrace_call_old(void); #endif #endif diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 32edfadb1593..a6d4ee86ba54 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -118,6 +118,8 @@ #define L310_AUX_CTRL_STORE_LIMITATION BIT(11) /* R2P0+ */ #define L310_AUX_CTRL_EXCLUSIVE_CACHE BIT(12) #define L310_AUX_CTRL_ASSOCIATIVITY_16 BIT(16) +#define L310_AUX_CTRL_FWA_SHIFT 23 +#define L310_AUX_CTRL_FWA_MASK (3 << 23) #define L310_AUX_CTRL_CACHE_REPLACE_RR BIT(25) /* R2P0+ */ #define L310_AUX_CTRL_NS_LOCKDOWN BIT(26) #define L310_AUX_CTRL_NS_INT_CTRL BIT(27) diff --git a/arch/arm/include/asm/hw_breakpoint.h b/arch/arm/include/asm/hw_breakpoint.h index ac54c06764e6..62358d3ca0a8 100644 --- a/arch/arm/include/asm/hw_breakpoint.h +++ b/arch/arm/include/asm/hw_breakpoint.h @@ -53,6 +53,9 @@ static inline void decode_ctrl_reg(u32 reg, #define ARM_DEBUG_ARCH_V7_MM 4 #define ARM_DEBUG_ARCH_V7_1 5 #define ARM_DEBUG_ARCH_V8 6 +#define ARM_DEBUG_ARCH_V8_1 7 +#define ARM_DEBUG_ARCH_V8_2 8 +#define ARM_DEBUG_ARCH_V8_4 9 /* Breakpoint */ #define ARM_BREAKPOINT_EXECUTE 0 diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 7a0596fcb2e7..aefdabdbeb84 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -392,7 +392,6 @@ static inline void memcpy_toio(volatile void __iomem *to, const void *from, */ void __iomem *ioremap(resource_size_t res_cookie, size_t size); #define ioremap ioremap -#define ioremap_nocache ioremap /* * Do not use ioremap_cache for mapping memory. Use memremap instead. @@ -400,12 +399,6 @@ void __iomem *ioremap(resource_size_t res_cookie, size_t size); void __iomem *ioremap_cache(resource_size_t res_cookie, size_t size); #define ioremap_cache ioremap_cache -/* - * Do not use ioremap_cached in new code. Provided for the benefit of - * the pxa2xx-flash MTD driver only. - */ -void __iomem *ioremap_cached(resource_size_t res_cookie, size_t size); - void __iomem *ioremap_wc(resource_size_t res_cookie, size_t size); #define ioremap_wc ioremap_wc #define ioremap_wt ioremap_wc diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h index 0abd389cf0ec..68e6f25784a4 100644 --- a/arch/arm/include/asm/pci.h +++ b/arch/arm/include/asm/pci.h @@ -27,5 +27,7 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) return channel ? 15 : 14; } +extern void pcibios_report_status(unsigned int status_mask, int warn); + #endif /* __KERNEL__ */ #endif diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 3ae120cd1715..eabcb48a7840 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -12,7 +12,7 @@ #ifndef CONFIG_MMU -#include <asm-generic/4level-fixup.h> +#include <asm-generic/pgtable-nopud.h> #include <asm/pgtable-nommu.h> #else diff --git a/arch/arm/include/asm/vdso/gettimeofday.h b/arch/arm/include/asm/vdso/gettimeofday.h new file mode 100644 index 000000000000..0ad2429c324f --- /dev/null +++ b/arch/arm/include/asm/vdso/gettimeofday.h @@ -0,0 +1,97 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 ARM Limited + */ +#ifndef __ASM_VDSO_GETTIMEOFDAY_H +#define __ASM_VDSO_GETTIMEOFDAY_H + +#ifndef __ASSEMBLY__ + +#include <asm/barrier.h> +#include <asm/cp15.h> +#include <asm/unistd.h> +#include <uapi/linux/time.h> + +#define VDSO_HAS_CLOCK_GETRES 1 + +extern struct vdso_data *__get_datapage(void); + +static __always_inline int gettimeofday_fallback( + struct __kernel_old_timeval *_tv, + struct timezone *_tz) +{ + register struct timezone *tz asm("r1") = _tz; + register struct __kernel_old_timeval *tv asm("r0") = _tv; + register long ret asm ("r0"); + register long nr asm("r7") = __NR_gettimeofday; + + asm volatile( + " swi #0\n" + : "=r" (ret) + : "r" (tv), "r" (tz), "r" (nr) + : "memory"); + + return ret; +} + +static __always_inline long clock_gettime_fallback( + clockid_t _clkid, + struct __kernel_timespec *_ts) +{ + register struct __kernel_timespec *ts asm("r1") = _ts; + register clockid_t clkid asm("r0") = _clkid; + register long ret asm ("r0"); + register long nr asm("r7") = __NR_clock_gettime64; + + asm volatile( + " swi #0\n" + : "=r" (ret) + : "r" (clkid), "r" (ts), "r" (nr) + : "memory"); + + return ret; +} + +static __always_inline int clock_getres_fallback( + clockid_t _clkid, + struct __kernel_timespec *_ts) +{ + register struct __kernel_timespec *ts asm("r1") = _ts; + register clockid_t clkid asm("r0") = _clkid; + register long ret asm ("r0"); + register long nr asm("r7") = __NR_clock_getres_time64; + + asm volatile( + " swi #0\n" + : "=r" (ret) + : "r" (clkid), "r" (ts), "r" (nr) + : "memory"); + + return ret; +} + +static __always_inline u64 __arch_get_hw_counter(int clock_mode) +{ +#ifdef CONFIG_ARM_ARCH_TIMER + u64 cycle_now; + + if (!clock_mode) + return -EINVAL; + + isb(); + cycle_now = read_sysreg(CNTVCT); + + return cycle_now; +#else + return -EINVAL; /* use fallback */ +#endif +} + +static __always_inline const struct vdso_data *__arch_get_vdso_data(void) +{ + return __get_datapage(); +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* __ASM_VDSO_GETTIMEOFDAY_H */ diff --git a/arch/arm/include/asm/vdso/vsyscall.h b/arch/arm/include/asm/vdso/vsyscall.h new file mode 100644 index 000000000000..c4166f317071 --- /dev/null +++ b/arch/arm/include/asm/vdso/vsyscall.h @@ -0,0 +1,71 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __ASM_VDSO_VSYSCALL_H +#define __ASM_VDSO_VSYSCALL_H + +#ifndef __ASSEMBLY__ + +#include <linux/timekeeper_internal.h> +#include <vdso/datapage.h> +#include <asm/cacheflush.h> + +extern struct vdso_data *vdso_data; +extern bool cntvct_ok; + +static __always_inline +bool tk_is_cntvct(const struct timekeeper *tk) +{ + if (!IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) + return false; + + if (!tk->tkr_mono.clock->archdata.vdso_direct) + return false; + + return true; +} + +/* + * Update the vDSO data page to keep in sync with kernel timekeeping. + */ +static __always_inline +struct vdso_data *__arm_get_k_vdso_data(void) +{ + return vdso_data; +} +#define __arch_get_k_vdso_data __arm_get_k_vdso_data + +static __always_inline +int __arm_update_vdso_data(void) +{ + return !cntvct_ok; +} +#define __arch_update_vdso_data __arm_update_vdso_data + +static __always_inline +int __arm_get_clock_mode(struct timekeeper *tk) +{ + u32 __tk_is_cntvct = tk_is_cntvct(tk); + + return __tk_is_cntvct; +} +#define __arch_get_clock_mode __arm_get_clock_mode + +static __always_inline +int __arm_use_vsyscall(struct vdso_data *vdata) +{ + return vdata[CS_HRES_COARSE].clock_mode; +} +#define __arch_use_vsyscall __arm_use_vsyscall + +static __always_inline +void __arm_sync_vdso_data(struct vdso_data *vdata) +{ + flush_dcache_page(virt_to_page(vdata)); +} +#define __arch_sync_vdso_data __arm_sync_vdso_data + +/* The asm-generic header needs to be included after the definitions above */ +#include <asm-generic/vdso/vsyscall.h> + +#endif /* !__ASSEMBLY__ */ + +#endif /* __ASM_VDSO_VSYSCALL_H */ diff --git a/arch/arm/include/asm/vdso_datapage.h b/arch/arm/include/asm/vdso_datapage.h index 7910abf89b1c..bef68f59928d 100644 --- a/arch/arm/include/asm/vdso_datapage.h +++ b/arch/arm/include/asm/vdso_datapage.h @@ -11,35 +11,12 @@ #ifndef __ASSEMBLY__ +#include <vdso/datapage.h> #include <asm/page.h> -/* Try to be cache-friendly on systems that don't implement the - * generic timer: fit the unconditionally updated fields in the first - * 32 bytes. - */ -struct vdso_data { - u32 seq_count; /* sequence count - odd during updates */ - u16 tk_is_cntvct; /* fall back to syscall if false */ - u16 cs_shift; /* clocksource shift */ - u32 xtime_coarse_sec; /* coarse time */ - u32 xtime_coarse_nsec; - - u32 wtm_clock_sec; /* wall to monotonic offset */ - u32 wtm_clock_nsec; - u32 xtime_clock_sec; /* CLOCK_REALTIME - seconds */ - u32 cs_mult; /* clocksource multiplier */ - - u64 cs_cycle_last; /* last cycle value */ - u64 cs_mask; /* clocksource mask */ - - u64 xtime_clock_snsec; /* CLOCK_REALTIME sub-ns base */ - u32 tz_minuteswest; /* timezone info for gettimeofday(2) */ - u32 tz_dsttime; -}; - union vdso_data_store { - struct vdso_data data; - u8 page[PAGE_SIZE]; + struct vdso_data data[CS_BASES]; + u8 page[PAGE_SIZE]; }; #endif /* !__ASSEMBLY__ */ diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index a885172e504c..89e5d864e923 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -17,10 +17,14 @@ CFLAGS_REMOVE_return_address.o = -pg # Object file lists. obj-y := elf.o entry-common.o irq.o opcodes.o \ - process.o ptrace.o reboot.o return_address.o \ + process.o ptrace.o reboot.o \ setup.o signal.o sigreturn_codes.o \ stacktrace.o sys_arm.o time.o traps.o +ifneq ($(CONFIG_ARM_UNWIND),y) +obj-$(CONFIG_FRAME_POINTER) += return_address.o +endif + obj-$(CONFIG_ATAGS) += atags_parse.o obj-$(CONFIG_ATAGS_PROC) += atags_proc.o obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += atags_compat.o diff --git a/arch/arm/kernel/arch_timer.c b/arch/arm/kernel/arch_timer.c index c125582de2e7..b5e217907686 100644 --- a/arch/arm/kernel/arch_timer.c +++ b/arch/arm/kernel/arch_timer.c @@ -10,6 +10,7 @@ #include <linux/errno.h> #include <asm/delay.h> +#include <asm/arch_timer.h> #include <clocksource/arm_arch_timer.h> diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index b0c195e3a06d..02ca7adf5375 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -246,6 +246,9 @@ static int enable_monitor_mode(void) case ARM_DEBUG_ARCH_V7_ECP14: case ARM_DEBUG_ARCH_V7_1: case ARM_DEBUG_ARCH_V8: + case ARM_DEBUG_ARCH_V8_1: + case ARM_DEBUG_ARCH_V8_2: + case ARM_DEBUG_ARCH_V8_4: ARM_DBG_WRITE(c0, c2, 2, (dscr | ARM_DSCR_MDBGEN)); isb(); break; diff --git a/arch/arm/kernel/module-plts.c b/arch/arm/kernel/module-plts.c index b647741c0ab0..6e626abaefc5 100644 --- a/arch/arm/kernel/module-plts.c +++ b/arch/arm/kernel/module-plts.c @@ -7,6 +7,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/sort.h> +#include <linux/moduleloader.h> #include <asm/cache.h> #include <asm/opcodes.h> diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 9485acc520a4..cea1c27c29cb 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -36,6 +36,8 @@ #include <asm/tls.h> #include <asm/vdso.h> +#include "signal.h" + #if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_STACKPROTECTOR_PER_TASK) #include <linux/stackprotector.h> unsigned long __stack_chk_guard __read_mostly; diff --git a/arch/arm/kernel/psci_smp.c b/arch/arm/kernel/psci_smp.c index aba6b2ab7a58..d4392e177484 100644 --- a/arch/arm/kernel/psci_smp.c +++ b/arch/arm/kernel/psci_smp.c @@ -51,7 +51,7 @@ static int psci_boot_secondary(unsigned int cpu, struct task_struct *idle) } #ifdef CONFIG_HOTPLUG_CPU -int psci_cpu_disable(unsigned int cpu) +static int psci_cpu_disable(unsigned int cpu) { /* Fail early if we don't have CPU_OFF support */ if (!psci_ops.cpu_off) @@ -64,7 +64,7 @@ int psci_cpu_disable(unsigned int cpu) return 0; } -void psci_cpu_die(unsigned int cpu) +static void psci_cpu_die(unsigned int cpu) { u32 state = PSCI_POWER_STATE_TYPE_POWER_DOWN << PSCI_0_2_POWER_STATE_TYPE_SHIFT; @@ -76,7 +76,7 @@ void psci_cpu_die(unsigned int cpu) panic("psci: cpu %d failed to shutdown\n", cpu); } -int psci_cpu_kill(unsigned int cpu) +static int psci_cpu_kill(unsigned int cpu) { int err, i; diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 324352787aea..b606cded90cd 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -923,7 +923,7 @@ asmlinkage int syscall_trace_enter(struct pt_regs *regs, int scno) /* Do seccomp after ptrace; syscall may have changed. */ #ifdef CONFIG_HAVE_ARCH_SECCOMP_FILTER - if (secure_computing(NULL) == -1) + if (secure_computing() == -1) return -1; #else /* XXX: remove this once OABI gets fixed */ diff --git a/arch/arm/kernel/return_address.c b/arch/arm/kernel/return_address.c index b0d2f1fe891d..7b42ac010fdf 100644 --- a/arch/arm/kernel/return_address.c +++ b/arch/arm/kernel/return_address.c @@ -7,8 +7,6 @@ */ #include <linux/export.h> #include <linux/ftrace.h> - -#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) #include <linux/sched.h> #include <asm/stacktrace.h> @@ -53,6 +51,4 @@ void *return_address(unsigned int level) return NULL; } -#endif /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) */ - EXPORT_SYMBOL_GPL(return_address); diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h index b7b838b05229..cb076d30ab38 100644 --- a/arch/arm/kernel/signal.h +++ b/arch/arm/kernel/signal.h @@ -9,3 +9,5 @@ struct rt_sigframe { struct siginfo info; struct sigframe sig; }; + +extern struct page *get_signal_page(void); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 4b0bab2607e4..46e1be9e57a8 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -240,6 +240,10 @@ int __cpu_disable(void) if (ret) return ret; +#ifdef CONFIG_GENERIC_ARCH_TOPOLOGY + remove_cpu_topology(cpu); +#endif + /* * Take this CPU offline. Once we clear this, we can't return, * and we must not schedule until we're ready to give up the cpu. diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c index 9d9b1db73932..d3a85f01b328 100644 --- a/arch/arm/kernel/tcm.c +++ b/arch/arm/kernel/tcm.c @@ -18,6 +18,7 @@ #include <asm/memory.h> #include <asm/system_info.h> #include <asm/traps.h> +#include <asm/tcm.h> #define TCMTR_FORMAT_MASK 0xe0000000U @@ -30,8 +31,8 @@ extern char __itcm_start, __sitcm_text, __eitcm_text; extern char __dtcm_start, __sdtcm_data, __edtcm_data; /* These will be increased as we run */ -u32 dtcm_end = DTCM_OFFSET; -u32 itcm_end = ITCM_OFFSET; +static u32 dtcm_end = DTCM_OFFSET; +static u32 itcm_end = ITCM_OFFSET; /* * TCM memory resources diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index b996b2cf0703..dddc7ebf4db4 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -9,6 +9,7 @@ * reading the RTC at bootup, etc... */ #include <linux/clk-provider.h> +#include <linux/clockchips.h> #include <linux/clocksource.h> #include <linux/errno.h> #include <linux/export.h> @@ -107,5 +108,6 @@ void __init time_init(void) of_clk_init(NULL); #endif timer_probe(); + tick_setup_hrtimer_broadcast(); } } diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index 5b9faba03afb..b5adaf744630 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -95,7 +95,7 @@ static void __init parse_dt_topology(void) GFP_NOWAIT); for_each_possible_cpu(cpu) { - const u32 *rate; + const __be32 *rate; int len; /* too early to use cpu->of_node */ @@ -196,9 +196,8 @@ void store_cpu_topology(unsigned int cpuid) struct cpu_topology *cpuid_topo = &cpu_topology[cpuid]; unsigned int mpidr; - /* If the cpu topology has been already set, just return */ - if (cpuid_topo->core_id != -1) - return; + if (cpuid_topo->package_id != -1) + goto topology_populated; mpidr = read_cpuid_mpidr(); @@ -231,14 +230,15 @@ void store_cpu_topology(unsigned int cpuid) cpuid_topo->package_id = -1; } - update_siblings_masks(cpuid); - update_cpu_capacity(cpuid); pr_info("CPU%u: thread %d, cpu %d, socket %d, mpidr %x\n", cpuid, cpu_topology[cpuid].thread_id, cpu_topology[cpuid].core_id, cpu_topology[cpuid].package_id, mpidr); + +topology_populated: + update_siblings_masks(cpuid); } static inline int cpu_corepower_flags(void) diff --git a/arch/arm/kernel/vdso.c b/arch/arm/kernel/vdso.c index 9bf16c93ee6a..c89ac1b9d28b 100644 --- a/arch/arm/kernel/vdso.c +++ b/arch/arm/kernel/vdso.c @@ -23,6 +23,8 @@ #include <asm/vdso.h> #include <asm/vdso_datapage.h> #include <clocksource/arm_arch_timer.h> +#include <vdso/helpers.h> +#include <vdso/vsyscall.h> #define MAX_SYMNAME 64 @@ -37,7 +39,7 @@ unsigned int vdso_total_pages __ro_after_init; * The VDSO data page. */ static union vdso_data_store vdso_data_store __page_aligned_data; -static struct vdso_data *vdso_data = &vdso_data_store.data; +struct vdso_data *vdso_data = vdso_data_store.data; static struct page *vdso_data_page __ro_after_init; static const struct vm_special_mapping vdso_data_mapping = { @@ -77,7 +79,7 @@ struct elfinfo { /* Cached result of boot-time check for whether the arch timer exists, * and if so, whether the virtual counter is useable. */ -static bool cntvct_ok __ro_after_init; +bool cntvct_ok __ro_after_init; static bool __init cntvct_functional(void) { @@ -262,84 +264,3 @@ void arm_install_vdso(struct mm_struct *mm, unsigned long addr) mm->context.vdso = addr; } -static void vdso_write_begin(struct vdso_data *vdata) -{ - ++vdso_data->seq_count; - smp_wmb(); /* Pairs with smp_rmb in vdso_read_retry */ -} - -static void vdso_write_end(struct vdso_data *vdata) -{ - smp_wmb(); /* Pairs with smp_rmb in vdso_read_begin */ - ++vdso_data->seq_count; -} - -static bool tk_is_cntvct(const struct timekeeper *tk) -{ - if (!IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) - return false; - - if (!tk->tkr_mono.clock->archdata.vdso_direct) - return false; - - return true; -} - -/** - * update_vsyscall - update the vdso data page - * - * Increment the sequence counter, making it odd, indicating to - * userspace that an update is in progress. Update the fields used - * for coarse clocks and, if the architected system timer is in use, - * the fields used for high precision clocks. Increment the sequence - * counter again, making it even, indicating to userspace that the - * update is finished. - * - * Userspace is expected to sample seq_count before reading any other - * fields from the data page. If seq_count is odd, userspace is - * expected to wait until it becomes even. After copying data from - * the page, userspace must sample seq_count again; if it has changed - * from its previous value, userspace must retry the whole sequence. - * - * Calls to update_vsyscall are serialized by the timekeeping core. - */ -void update_vsyscall(struct timekeeper *tk) -{ - struct timespec64 *wtm = &tk->wall_to_monotonic; - - if (!cntvct_ok) { - /* The entry points have been zeroed, so there is no - * point in updating the data page. - */ - return; - } - - vdso_write_begin(vdso_data); - - vdso_data->tk_is_cntvct = tk_is_cntvct(tk); - vdso_data->xtime_coarse_sec = tk->xtime_sec; - vdso_data->xtime_coarse_nsec = (u32)(tk->tkr_mono.xtime_nsec >> - tk->tkr_mono.shift); - vdso_data->wtm_clock_sec = wtm->tv_sec; - vdso_data->wtm_clock_nsec = wtm->tv_nsec; - - if (vdso_data->tk_is_cntvct) { - vdso_data->cs_cycle_last = tk->tkr_mono.cycle_last; - vdso_data->xtime_clock_sec = tk->xtime_sec; - vdso_data->xtime_clock_snsec = tk->tkr_mono.xtime_nsec; - vdso_data->cs_mult = tk->tkr_mono.mult; - vdso_data->cs_shift = tk->tkr_mono.shift; - vdso_data->cs_mask = tk->tkr_mono.mask; - } - - vdso_write_end(vdso_data); - - flush_dcache_page(virt_to_page(vdso_data)); -} - -void update_vsyscall_tz(void) -{ - vdso_data->tz_minuteswest = sys_tz.tz_minuteswest; - vdso_data->tz_dsttime = sys_tz.tz_dsttime; - flush_dcache_page(virt_to_page(vdso_data)); -} diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 5e5f1fabc3d4..e4e25f287ad7 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -161,6 +161,8 @@ config ARCH_BCM2835 select GPIOLIB select ARM_AMBA select ARM_ERRATA_411920 if ARCH_MULTI_V6 + select ARM_GIC if ARCH_MULTI_V7 + select ZONE_DMA if ARCH_MULTI_V7 select ARM_TIMER_SP804 select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7 select TIMER_OF @@ -169,7 +171,7 @@ config ARCH_BCM2835 select PINCTRL_BCM2835 select MFD_CORE help - This enables support for the Broadcom BCM2835 and BCM2836 SoCs. + This enables support for the Broadcom BCM2711 and BCM283x SoCs. This SoC is used in the Raspberry Pi and Roku 2 devices. config ARCH_BCM_53573 diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index b59c813b1af4..7baa8c9427d5 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -42,8 +42,9 @@ obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o obj-$(CONFIG_ARCH_BCM_MOBILE_SMC) += bcm_kona_smc.o # BCM2835 -obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o ifeq ($(CONFIG_ARCH_BCM2835),y) +obj-y += board_bcm2835.o +obj-y += bcm2711.o ifeq ($(CONFIG_ARM),y) obj-$(CONFIG_SMP) += platsmp.o endif diff --git a/arch/arm/mach-bcm/bcm2711.c b/arch/arm/mach-bcm/bcm2711.c new file mode 100644 index 000000000000..dbe296798647 --- /dev/null +++ b/arch/arm/mach-bcm/bcm2711.c @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Stefan Wahren + */ + +#include <linux/of_address.h> + +#include <asm/mach/arch.h> + +#include "platsmp.h" + +static const char * const bcm2711_compat[] = { +#ifdef CONFIG_ARCH_MULTI_V7 + "brcm,bcm2711", +#endif +}; + +DT_MACHINE_START(BCM2711, "BCM2711") +#ifdef CONFIG_ZONE_DMA + .dma_zone_size = SZ_1G, +#endif + .dt_compat = bcm2711_compat, + .smp = smp_ops(bcm2836_smp_ops), +MACHINE_END diff --git a/arch/arm/mach-bcm/bcm_kona_smc.c b/arch/arm/mach-bcm/bcm_kona_smc.c index 541e850a736c..43a16f922b53 100644 --- a/arch/arm/mach-bcm/bcm_kona_smc.c +++ b/arch/arm/mach-bcm/bcm_kona_smc.c @@ -140,7 +140,7 @@ static int bcm_kona_do_smc(u32 service_id, u32 buffer_phys) static void __bcm_kona_smc(void *info) { struct bcm_kona_smc_data *data = info; - u32 *args = bcm_smc_buffer; + u32 __iomem *args = bcm_smc_buffer; BUG_ON(smp_processor_id() != 0); BUG_ON(!args); diff --git a/arch/arm/mach-bcm/platsmp.c b/arch/arm/mach-bcm/platsmp.c index 47f8053d0240..21400b3fa5fe 100644 --- a/arch/arm/mach-bcm/platsmp.c +++ b/arch/arm/mach-bcm/platsmp.c @@ -22,6 +22,8 @@ #include <asm/smp_plat.h> #include <asm/smp_scu.h> +#include "platsmp.h" + /* Size of mapped Cortex A9 SCU address space */ #define CORTEX_A9_SCU_SIZE 0x58 diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 9dab1f50a02f..4ef56571145b 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -13,6 +13,7 @@ menuconfig ARCH_EXYNOS select ARM_AMBA select ARM_GIC select COMMON_CLK_SAMSUNG + select EXYNOS_ASV select EXYNOS_CHIPID select EXYNOS_THERMAL select EXYNOS_PMU diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index 8b81a17f675d..416462e3f5d6 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -31,7 +31,6 @@ PCI_STATUS_PARITY) << 16) extern int setup_arm_irq(int, struct irqaction *); -extern void pcibios_report_status(u_int status_mask, int warn); static unsigned long dc21285_base_address(struct pci_bus *bus, unsigned int devfn) diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig index 98338a489921..3b010fe7c0e9 100644 --- a/arch/arm/mach-hisi/Kconfig +++ b/arch/arm/mach-hisi/Kconfig @@ -15,7 +15,6 @@ menu "Hisilicon platform type" config ARCH_HI3xxx bool "Hisilicon Hi36xx family" - depends on ARCH_MULTI_V7 select CACHE_L2X0 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP @@ -25,17 +24,15 @@ config ARCH_HI3xxx Support for Hisilicon Hi36xx SoC family config ARCH_HIP01 - bool "Hisilicon HIP01 family" - depends on ARCH_MULTI_V7 - select HAVE_ARM_SCU if SMP - select HAVE_ARM_TWD if SMP - select ARM_GLOBAL_TIMER - help - Support for Hisilicon HIP01 SoC family + bool "Hisilicon HIP01 family" + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if SMP + select ARM_GLOBAL_TIMER + help + Support for Hisilicon HIP01 SoC family config ARCH_HIP04 bool "Hisilicon HiP04 Cortex A15 family" - depends on ARCH_MULTI_V7 select ARM_ERRATA_798181 if SMP select HAVE_ARM_ARCH_TIMER select MCPM if SMP @@ -46,7 +43,6 @@ config ARCH_HIP04 config ARCH_HIX5HD2 bool "Hisilicon X5HD2 family" - depends on ARCH_MULTI_V7 select CACHE_L2X0 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c index 777d8c255501..8fb68c0ec34c 100644 --- a/arch/arm/mach-imx/anatop.c +++ b/arch/arm/mach-imx/anatop.c @@ -19,8 +19,6 @@ #define ANADIG_REG_2P5 0x130 #define ANADIG_REG_CORE 0x140 #define ANADIG_ANA_MISC0 0x150 -#define ANADIG_USB1_CHRG_DETECT 0x1b0 -#define ANADIG_USB2_CHRG_DETECT 0x210 #define ANADIG_DIGPROG 0x260 #define ANADIG_DIGPROG_IMX6SL 0x280 #define ANADIG_DIGPROG_IMX7D 0x800 @@ -33,8 +31,6 @@ #define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG 0x1000 /* Below MISC0_DISCON_HIGH_SNVS is only for i.MX6SL */ #define BM_ANADIG_ANA_MISC0_DISCON_HIGH_SNVS 0x2000 -#define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B 0x80000 -#define BM_ANADIG_USB_CHRG_DETECT_EN_B 0x100000 static struct regmap *anatop; @@ -96,16 +92,6 @@ void imx_anatop_post_resume(void) } -static void imx_anatop_usb_chrg_detect_disable(void) -{ - regmap_write(anatop, ANADIG_USB1_CHRG_DETECT, - BM_ANADIG_USB_CHRG_DETECT_EN_B - | BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B); - regmap_write(anatop, ANADIG_USB2_CHRG_DETECT, - BM_ANADIG_USB_CHRG_DETECT_EN_B | - BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B); -} - void __init imx_init_revision_from_anatop(void) { struct device_node *np; @@ -171,10 +157,6 @@ void __init imx_init_revision_from_anatop(void) void __init imx_anatop_init(void) { anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop"); - if (IS_ERR(anatop)) { + if (IS_ERR(anatop)) pr_err("%s: failed to find imx6q-anatop regmap!\n", __func__); - return; - } - - imx_anatop_usb_chrg_detect_disable(); } diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index 0b137eeffb61..d8118031c51f 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -1,15 +1,20 @@ // SPDX-License-Identifier: GPL-2.0 #include <linux/err.h> +#include <linux/mfd/syscon.h> #include <linux/module.h> #include <linux/io.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/regmap.h> #include <linux/slab.h> #include <linux/sys_soc.h> #include "hardware.h" #include "common.h" +#define OCOTP_UID_H 0x420 +#define OCOTP_UID_L 0x410 + unsigned int __mxc_cpu_type; static unsigned int imx_soc_revision; @@ -76,9 +81,13 @@ void __init imx_aips_allow_unprivileged_access( struct device * __init imx_soc_device_init(void) { struct soc_device_attribute *soc_dev_attr; + const char *ocotp_compat = NULL; struct soc_device *soc_dev; struct device_node *root; + struct regmap *ocotp; const char *soc_id; + u64 soc_uid = 0; + u32 val; int ret; soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); @@ -119,30 +128,39 @@ struct device * __init imx_soc_device_init(void) soc_id = "i.MX53"; break; case MXC_CPU_IMX6SL: + ocotp_compat = "fsl,imx6sl-ocotp"; soc_id = "i.MX6SL"; break; case MXC_CPU_IMX6DL: + ocotp_compat = "fsl,imx6q-ocotp"; soc_id = "i.MX6DL"; break; case MXC_CPU_IMX6SX: + ocotp_compat = "fsl,imx6sx-ocotp"; soc_id = "i.MX6SX"; break; case MXC_CPU_IMX6Q: + ocotp_compat = "fsl,imx6q-ocotp"; soc_id = "i.MX6Q"; break; case MXC_CPU_IMX6UL: + ocotp_compat = "fsl,imx6ul-ocotp"; soc_id = "i.MX6UL"; break; case MXC_CPU_IMX6ULL: + ocotp_compat = "fsl,imx6ul-ocotp"; soc_id = "i.MX6ULL"; break; case MXC_CPU_IMX6ULZ: + ocotp_compat = "fsl,imx6ul-ocotp"; soc_id = "i.MX6ULZ"; break; case MXC_CPU_IMX6SLL: + ocotp_compat = "fsl,imx6sll-ocotp"; soc_id = "i.MX6SLL"; break; case MXC_CPU_IMX7D: + ocotp_compat = "fsl,imx7d-ocotp"; soc_id = "i.MX7D"; break; case MXC_CPU_IMX7ULP: @@ -153,18 +171,36 @@ struct device * __init imx_soc_device_init(void) } soc_dev_attr->soc_id = soc_id; + if (ocotp_compat) { + ocotp = syscon_regmap_lookup_by_compatible(ocotp_compat); + if (IS_ERR(ocotp)) + pr_err("%s: failed to find %s regmap!\n", __func__, ocotp_compat); + + regmap_read(ocotp, OCOTP_UID_H, &val); + soc_uid = val; + regmap_read(ocotp, OCOTP_UID_L, &val); + soc_uid <<= 32; + soc_uid |= val; + } + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%d.%d", (imx_soc_revision >> 4) & 0xf, imx_soc_revision & 0xf); if (!soc_dev_attr->revision) goto free_soc; + soc_dev_attr->serial_number = kasprintf(GFP_KERNEL, "%016llX", soc_uid); + if (!soc_dev_attr->serial_number) + goto free_rev; + soc_dev = soc_device_register(soc_dev_attr); if (IS_ERR(soc_dev)) - goto free_rev; + goto free_serial_number; return soc_device_to_device(soc_dev); +free_serial_number: + kfree(soc_dev_attr->serial_number); free_rev: kfree(soc_dev_attr->revision); free_soc: diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c index 39a7d9393641..24dd5bbe60e4 100644 --- a/arch/arm/mach-imx/cpuidle-imx6q.c +++ b/arch/arm/mach-imx/cpuidle-imx6q.c @@ -62,13 +62,13 @@ static struct cpuidle_driver imx6q_cpuidle_driver = { */ void imx6q_cpuidle_fec_irqs_used(void) { - imx6q_cpuidle_driver.states[1].disabled = true; + cpuidle_driver_state_disabled(&imx6q_cpuidle_driver, 1, true); } EXPORT_SYMBOL_GPL(imx6q_cpuidle_fec_irqs_used); void imx6q_cpuidle_fec_irqs_unused(void) { - imx6q_cpuidle_driver.states[1].disabled = false; + cpuidle_driver_state_disabled(&imx6q_cpuidle_driver, 1, false); } EXPORT_SYMBOL_GPL(imx6q_cpuidle_fec_irqs_unused); diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 089d11ffaa3e..82e22398d43d 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -6,32 +6,12 @@ #include <linux/errno.h> #include <linux/jiffies.h> +#include <asm/cacheflush.h> #include <asm/cp15.h> #include <asm/proc-fns.h> #include "common.h" -static inline void cpu_enter_lowpower(void) -{ - unsigned int v; - - asm volatile( - "mcr p15, 0, %1, c7, c5, 0\n" - " mcr p15, 0, %1, c7, c10, 4\n" - /* - * Turn off coherency - */ - " mrc p15, 0, %0, c1, c0, 1\n" - " bic %0, %0, %3\n" - " mcr p15, 0, %0, c1, c0, 1\n" - " mrc p15, 0, %0, c1, c0, 0\n" - " bic %0, %0, %2\n" - " mcr p15, 0, %0, c1, c0, 0\n" - : "=&r" (v) - : "r" (0), "Ir" (CR_C), "Ir" (0x40) - : "cc"); -} - /* * platform-specific code to shutdown a CPU * @@ -39,7 +19,7 @@ static inline void cpu_enter_lowpower(void) */ void imx_cpu_die(unsigned int cpu) { - cpu_enter_lowpower(); + v7_exit_coherency_flush(louis); /* * We use the cpu jumping argument register to sync with * imx_cpu_kill() which is running on cpu0 and waiting for diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index 0440109e973b..b58a03b18bde 100644 --- a/arch/arm/mach-mmp/Kconfig +++ b/arch/arm/mach-mmp/Kconfig @@ -1,13 +1,13 @@ # SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_MMP - bool "Marvell PXA168/910/MMP2" + bool "Marvell PXA168/910/MMP2/MMP3" depends on ARCH_MULTI_V5 || ARCH_MULTI_V7 select GPIO_PXA select GPIOLIB select PINCTRL select PLAT_PXA help - Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line. + Support for Marvell's PXA168/PXA910(MMP), MMP2, and MMP3 processor lines. if ARCH_MMP @@ -129,6 +129,24 @@ config MACH_MMP2_DT Include support for Marvell MMP2 based platforms using the device tree. +config MACH_MMP3_DT + bool "Support MMP3 (ARMv7) platforms" + depends on ARCH_MULTI_V7 + select ARM_GIC + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if SMP + select CACHE_L2X0 + select PINCTRL + select PINCTRL_SINGLE + select ARCH_HAS_RESET_CONTROLLER + select CPU_PJ4B + select PM_GENERIC_DOMAINS if PM + select PM_GENERIC_DOMAINS_OF if PM && OF + help + Say 'Y' here if you want to include support for platforms + with Marvell MMP3 processor, also known as PXA2128 or + Armada 620. + endmenu config CPU_PXA168 diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile index 8f267c7bc6e8..7b3a7f979eec 100644 --- a/arch/arm/mach-mmp/Makefile +++ b/arch/arm/mach-mmp/Makefile @@ -22,6 +22,9 @@ ifeq ($(CONFIG_PM),y) obj-$(CONFIG_CPU_PXA910) += pm-pxa910.o obj-$(CONFIG_CPU_MMP2) += pm-mmp2.o endif +ifeq ($(CONFIG_SMP),y) +obj-$(CONFIG_MACH_MMP3_DT) += platsmp.o +endif # board support obj-$(CONFIG_MACH_ASPENITE) += aspenite.o @@ -34,5 +37,6 @@ obj-$(CONFIG_MACH_FLINT) += flint.o obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o obj-$(CONFIG_MACH_MMP_DT) += mmp-dt.o obj-$(CONFIG_MACH_MMP2_DT) += mmp2-dt.o +obj-$(CONFIG_MACH_MMP3_DT) += mmp3.o obj-$(CONFIG_MACH_TETON_BGA) += teton_bga.o obj-$(CONFIG_MACH_GPLUGD) += gplugd.o diff --git a/arch/arm/mach-mmp/addr-map.h b/arch/arm/mach-mmp/addr-map.h index 25edf6a92276..3dc2f0b0ecba 100644 --- a/arch/arm/mach-mmp/addr-map.h +++ b/arch/arm/mach-mmp/addr-map.h @@ -20,6 +20,10 @@ #define AXI_VIRT_BASE IOMEM(0xfe200000) #define AXI_PHYS_SIZE 0x00200000 +#define PGU_PHYS_BASE 0xe0000000 +#define PGU_VIRT_BASE IOMEM(0xfe400000) +#define PGU_PHYS_SIZE 0x00100000 + /* Static Memory Controller - Chip Select 0 and 1 */ #define SMC_CS0_PHYS_BASE 0x80000000 #define SMC_CS0_PHYS_SIZE 0x10000000 @@ -38,4 +42,7 @@ #define CIU_VIRT_BASE (AXI_VIRT_BASE + 0x82c00) #define CIU_REG(x) (CIU_VIRT_BASE + (x)) +#define SCU_VIRT_BASE (PGU_VIRT_BASE) +#define SCU_REG(x) (SCU_VIRT_BASE + (x)) + #endif /* __ASM_MACH_ADDR_MAP_H */ diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c index 6684abc7708b..e94349d4726c 100644 --- a/arch/arm/mach-mmp/common.c +++ b/arch/arm/mach-mmp/common.c @@ -13,11 +13,11 @@ #include <asm/mach/map.h> #include <asm/system_misc.h> #include "addr-map.h" -#include "cputype.h" +#include <linux/soc/mmp/cputype.h> #include "common.h" -#define MMP_CHIPID (AXI_VIRT_BASE + 0x82c00) +#define MMP_CHIPID CIU_REG(0x00) unsigned int mmp_chip_id; EXPORT_SYMBOL(mmp_chip_id); @@ -36,6 +36,15 @@ static struct map_desc standard_io_desc[] __initdata = { }, }; +static struct map_desc mmp2_io_desc[] __initdata = { + { + .pfn = __phys_to_pfn(PGU_PHYS_BASE), + .virtual = (unsigned long)PGU_VIRT_BASE, + .length = PGU_PHYS_SIZE, + .type = MT_DEVICE, + }, +}; + void __init mmp_map_io(void) { iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc)); @@ -44,6 +53,12 @@ void __init mmp_map_io(void) mmp_chip_id = __raw_readl(MMP_CHIPID); } +void __init mmp2_map_io(void) +{ + mmp_map_io(); + iotable_init(mmp2_io_desc, ARRAY_SIZE(mmp2_io_desc)); +} + void mmp_restart(enum reboot_mode mode, const char *cmd) { soft_restart(0); diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h index 483b8b6d3005..ed56b3f15b45 100644 --- a/arch/arm/mach-mmp/common.h +++ b/arch/arm/mach-mmp/common.h @@ -5,4 +5,5 @@ extern void mmp_timer_init(int irq, unsigned long rate); extern void __init mmp_map_io(void); +extern void __init mmp2_map_io(void); extern void mmp_restart(enum reboot_mode, const char *); diff --git a/arch/arm/mach-mmp/cputype.h b/arch/arm/mach-mmp/cputype.h deleted file mode 100644 index a96abcf521b4..000000000000 --- a/arch/arm/mach-mmp/cputype.h +++ /dev/null @@ -1,58 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_MACH_CPUTYPE_H -#define __ASM_MACH_CPUTYPE_H - -#include <asm/cputype.h> - -/* - * CPU Stepping CPU_ID CHIP_ID - * - * PXA168 S0 0x56158400 0x0000C910 - * PXA168 A0 0x56158400 0x00A0A168 - * PXA910 Y1 0x56158400 0x00F2C920 - * PXA910 A0 0x56158400 0x00F2C910 - * PXA910 A1 0x56158400 0x00A0C910 - * PXA920 Y0 0x56158400 0x00F2C920 - * PXA920 A0 0x56158400 0x00A0C920 - * PXA920 A1 0x56158400 0x00A1C920 - * MMP2 Z0 0x560f5811 0x00F00410 - * MMP2 Z1 0x560f5811 0x00E00410 - * MMP2 A0 0x560f5811 0x00A0A610 - */ - -extern unsigned int mmp_chip_id; - -#ifdef CONFIG_CPU_PXA168 -static inline int cpu_is_pxa168(void) -{ - return (((read_cpuid_id() >> 8) & 0xff) == 0x84) && - ((mmp_chip_id & 0xfff) == 0x168); -} -#else -#define cpu_is_pxa168() (0) -#endif - -/* cpu_is_pxa910() is shared on both pxa910 and pxa920 */ -#ifdef CONFIG_CPU_PXA910 -static inline int cpu_is_pxa910(void) -{ - return (((read_cpuid_id() >> 8) & 0xff) == 0x84) && - (((mmp_chip_id & 0xfff) == 0x910) || - ((mmp_chip_id & 0xfff) == 0x920)); -} -#else -#define cpu_is_pxa910() (0) -#endif - -#if defined(CONFIG_CPU_MMP2) || defined(CONFIG_MACH_MMP2_DT) -static inline int cpu_is_mmp2(void) -{ - return (((read_cpuid_id() >> 8) & 0xff) == 0x58) && - (((mmp_chip_id & 0xfff) == 0x410) || - ((mmp_chip_id & 0xfff) == 0x610)); -} -#else -#define cpu_is_mmp2() (0) -#endif - -#endif /* __ASM_MACH_CPUTYPE_H */ diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c index 130c1a603ba2..18bee66a671f 100644 --- a/arch/arm/mach-mmp/devices.c +++ b/arch/arm/mach-mmp/devices.c @@ -11,7 +11,7 @@ #include <asm/irq.h> #include "irqs.h" #include "devices.h" -#include "cputype.h" +#include <linux/soc/mmp/cputype.h> #include "regs-usb.h" int __init pxa_register_device(struct pxa_device_desc *desc, diff --git a/arch/arm/mach-mmp/mmp-dt.c b/arch/arm/mach-mmp/mmp-dt.c index 35559792d5cc..91214996acec 100644 --- a/arch/arm/mach-mmp/mmp-dt.c +++ b/arch/arm/mach-mmp/mmp-dt.c @@ -9,14 +9,13 @@ #include <linux/irqchip.h> #include <linux/of_platform.h> #include <linux/clk-provider.h> +#include <linux/clocksource.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/hardware/cache-tauros2.h> #include "common.h" -extern void __init mmp_dt_init_timer(void); - static const char *const pxa168_dt_board_compat[] __initconst = { "mrvl,pxa168-aspenite", NULL, @@ -32,8 +31,8 @@ static void __init mmp_init_time(void) #ifdef CONFIG_CACHE_TAUROS2 tauros2_init(0); #endif - mmp_dt_init_timer(); of_clk_init(NULL); + timer_probe(); } DT_MACHINE_START(PXA168_DT, "Marvell PXA168 (Device Tree Support)") diff --git a/arch/arm/mach-mmp/mmp2-dt.c b/arch/arm/mach-mmp/mmp2-dt.c index 305a9daba6d6..510c762ddc48 100644 --- a/arch/arm/mach-mmp/mmp2-dt.c +++ b/arch/arm/mach-mmp/mmp2-dt.c @@ -10,21 +10,20 @@ #include <linux/irqchip.h> #include <linux/of_platform.h> #include <linux/clk-provider.h> +#include <linux/clocksource.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/hardware/cache-tauros2.h> #include "common.h" -extern void __init mmp_dt_init_timer(void); - static void __init mmp_init_time(void) { #ifdef CONFIG_CACHE_TAUROS2 tauros2_init(0); #endif of_clk_init(NULL); - mmp_dt_init_timer(); + timer_probe(); } static const char *const mmp2_dt_board_compat[] __initconst = { @@ -33,7 +32,7 @@ static const char *const mmp2_dt_board_compat[] __initconst = { }; DT_MACHINE_START(MMP2_DT, "Marvell MMP2 (Device Tree Support)") - .map_io = mmp_map_io, + .map_io = mmp2_map_io, .init_time = mmp_init_time, .dt_compat = mmp2_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index 18ea3e1a26e6..bbc4c2274de3 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -20,7 +20,7 @@ #include <asm/mach/time.h> #include "addr-map.h" #include "regs-apbc.h" -#include "cputype.h" +#include <linux/soc/mmp/cputype.h> #include "irqs.h" #include "mfp.h" #include "devices.h" diff --git a/arch/arm/mach-mmp/mmp3.c b/arch/arm/mach-mmp/mmp3.c new file mode 100644 index 000000000000..b0e86964f302 --- /dev/null +++ b/arch/arm/mach-mmp/mmp3.c @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Marvell MMP3 aka PXA2128 aka 88AP2128 support + * + * Copyright (C) 2019 Lubomir Rintel <lkundrak@v3.sk> + */ + +#include <linux/io.h> +#include <linux/irqchip.h> +#include <linux/of_platform.h> +#include <linux/clk-provider.h> +#include <asm/mach/arch.h> +#include <asm/hardware/cache-l2x0.h> + +#include "common.h" + +static const char *const mmp3_dt_board_compat[] __initconst = { + "marvell,mmp3", + NULL, +}; + +DT_MACHINE_START(MMP2_DT, "Marvell MMP3") + .map_io = mmp2_map_io, + .dt_compat = mmp3_dt_board_compat, + .l2c_aux_val = 1 << L310_AUX_CTRL_FWA_SHIFT | + L310_AUX_CTRL_DATA_PREFETCH | + L310_AUX_CTRL_INSTR_PREFETCH, + .l2c_aux_mask = 0xc20fffff, +MACHINE_END diff --git a/arch/arm/mach-mmp/platsmp.c b/arch/arm/mach-mmp/platsmp.c new file mode 100644 index 000000000000..c99405469bb4 --- /dev/null +++ b/arch/arm/mach-mmp/platsmp.c @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2019 Lubomir Rintel <lkundrak@v3.sk> + */ +#include <linux/io.h> +#include <asm/smp_scu.h> +#include <asm/smp.h> +#include "addr-map.h" + +#define SW_BRANCH_VIRT_ADDR CIU_REG(0x24) + +static int mmp3_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + /* + * Apparently, the boot ROM on the second core spins on this + * register becoming non-zero and then jumps to the address written + * there. No IPIs involved. + */ + __raw_writel(__pa_symbol(secondary_startup), SW_BRANCH_VIRT_ADDR); + return 0; +} + +static void mmp3_smp_prepare_cpus(unsigned int max_cpus) +{ + scu_enable(SCU_VIRT_BASE); +} + +static const struct smp_operations mmp3_smp_ops __initconst = { + .smp_prepare_cpus = mmp3_smp_prepare_cpus, + .smp_boot_secondary = mmp3_boot_secondary, +}; +CPU_METHOD_OF_DECLARE(mmp3_smp, "marvell,mmp3-smp", &mmp3_smp_ops); diff --git a/arch/arm/mach-mmp/pm-mmp2.c b/arch/arm/mach-mmp/pm-mmp2.c index 2923dd5732a6..2d86381e152d 100644 --- a/arch/arm/mach-mmp/pm-mmp2.c +++ b/arch/arm/mach-mmp/pm-mmp2.c @@ -17,7 +17,7 @@ #include <linux/interrupt.h> #include <asm/mach-types.h> -#include "cputype.h" +#include <linux/soc/mmp/cputype.h> #include "addr-map.h" #include "pm-mmp2.h" #include "regs-icu.h" diff --git a/arch/arm/mach-mmp/pm-pxa910.c b/arch/arm/mach-mmp/pm-pxa910.c index 58535ce206dc..69ebe18ff209 100644 --- a/arch/arm/mach-mmp/pm-pxa910.c +++ b/arch/arm/mach-mmp/pm-pxa910.c @@ -18,7 +18,7 @@ #include <asm/mach-types.h> #include <asm/outercache.h> -#include "cputype.h" +#include <linux/soc/mmp/cputype.h> #include "addr-map.h" #include "pm-pxa910.h" #include "regs-icu.h" diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 6e0277488967..b642e900727a 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -21,7 +21,7 @@ #include "addr-map.h" #include "clock.h" #include "common.h" -#include "cputype.h" +#include <linux/soc/mmp/cputype.h> #include "devices.h" #include "irqs.h" #include "mfp.h" diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c index cba31c758dea..b19a069d9fab 100644 --- a/arch/arm/mach-mmp/pxa910.c +++ b/arch/arm/mach-mmp/pxa910.c @@ -18,7 +18,7 @@ #include <asm/mach/time.h> #include "addr-map.h" #include "regs-apbc.h" -#include "cputype.h" +#include <linux/soc/mmp/cputype.h> #include "irqs.h" #include "mfp.h" #include "devices.h" diff --git a/arch/arm/mach-mmp/regs-usb.h b/arch/arm/mach-mmp/regs-usb.h index d9f08c160154..ed0d1aa0ad6c 100644 --- a/arch/arm/mach-mmp/regs-usb.h +++ b/arch/arm/mach-mmp/regs-usb.h @@ -121,100 +121,6 @@ #define UTMI_OTG_ADDON_OTG_ON (1 << 0) -/* For MMP3 USB Phy */ -#define USB2_PLL_REG0 0x4 -#define USB2_PLL_REG1 0x8 -#define USB2_TX_REG0 0x10 -#define USB2_TX_REG1 0x14 -#define USB2_TX_REG2 0x18 -#define USB2_RX_REG0 0x20 -#define USB2_RX_REG1 0x24 -#define USB2_RX_REG2 0x28 -#define USB2_ANA_REG0 0x30 -#define USB2_ANA_REG1 0x34 -#define USB2_ANA_REG2 0x38 -#define USB2_DIG_REG0 0x3C -#define USB2_DIG_REG1 0x40 -#define USB2_DIG_REG2 0x44 -#define USB2_DIG_REG3 0x48 -#define USB2_TEST_REG0 0x4C -#define USB2_TEST_REG1 0x50 -#define USB2_TEST_REG2 0x54 -#define USB2_CHARGER_REG0 0x58 -#define USB2_OTG_REG0 0x5C -#define USB2_PHY_MON0 0x60 -#define USB2_RESETVE_REG0 0x64 -#define USB2_ICID_REG0 0x78 -#define USB2_ICID_REG1 0x7C - -/* USB2_PLL_REG0 */ -/* This is for Ax stepping */ -#define USB2_PLL_FBDIV_SHIFT_MMP3 0 -#define USB2_PLL_FBDIV_MASK_MMP3 (0xFF << 0) - -#define USB2_PLL_REFDIV_SHIFT_MMP3 8 -#define USB2_PLL_REFDIV_MASK_MMP3 (0xF << 8) - -#define USB2_PLL_VDD12_SHIFT_MMP3 12 -#define USB2_PLL_VDD18_SHIFT_MMP3 14 - -/* This is for B0 stepping */ -#define USB2_PLL_FBDIV_SHIFT_MMP3_B0 0 -#define USB2_PLL_REFDIV_SHIFT_MMP3_B0 9 -#define USB2_PLL_VDD18_SHIFT_MMP3_B0 14 -#define USB2_PLL_FBDIV_MASK_MMP3_B0 0x01FF -#define USB2_PLL_REFDIV_MASK_MMP3_B0 0x3E00 - -#define USB2_PLL_CAL12_SHIFT_MMP3 0 -#define USB2_PLL_CALI12_MASK_MMP3 (0x3 << 0) - -#define USB2_PLL_VCOCAL_START_SHIFT_MMP3 2 - -#define USB2_PLL_KVCO_SHIFT_MMP3 4 -#define USB2_PLL_KVCO_MASK_MMP3 (0x7<<4) - -#define USB2_PLL_ICP_SHIFT_MMP3 8 -#define USB2_PLL_ICP_MASK_MMP3 (0x7<<8) - -#define USB2_PLL_LOCK_BYPASS_SHIFT_MMP3 12 - -#define USB2_PLL_PU_PLL_SHIFT_MMP3 13 -#define USB2_PLL_PU_PLL_MASK (0x1 << 13) - -#define USB2_PLL_READY_MASK_MMP3 (0x1 << 15) - -/* USB2_TX_REG0 */ -#define USB2_TX_IMPCAL_VTH_SHIFT_MMP3 8 -#define USB2_TX_IMPCAL_VTH_MASK_MMP3 (0x7 << 8) - -#define USB2_TX_RCAL_START_SHIFT_MMP3 13 - -/* USB2_TX_REG1 */ -#define USB2_TX_CK60_PHSEL_SHIFT_MMP3 0 -#define USB2_TX_CK60_PHSEL_MASK_MMP3 (0xf << 0) - -#define USB2_TX_AMP_SHIFT_MMP3 4 -#define USB2_TX_AMP_MASK_MMP3 (0x7 << 4) - -#define USB2_TX_VDD12_SHIFT_MMP3 8 -#define USB2_TX_VDD12_MASK_MMP3 (0x3 << 8) - -/* USB2_TX_REG2 */ -#define USB2_TX_DRV_SLEWRATE_SHIFT 10 - -/* USB2_RX_REG0 */ -#define USB2_RX_SQ_THRESH_SHIFT_MMP3 4 -#define USB2_RX_SQ_THRESH_MASK_MMP3 (0xf << 4) - -#define USB2_RX_SQ_LENGTH_SHIFT_MMP3 10 -#define USB2_RX_SQ_LENGTH_MASK_MMP3 (0x3 << 10) - -/* USB2_ANA_REG1*/ -#define USB2_ANA_PU_ANA_SHIFT_MMP3 14 - -/* USB2_OTG_REG0 */ -#define USB2_OTG_PU_OTG_SHIFT_MMP3 3 - /* fsic registers */ #define FSIC_MISC 0x4 #define FSIC_INT 0x28 diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index 483df32583be..110dcb3314d1 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -33,7 +33,7 @@ #include "regs-timers.h" #include "regs-apbc.h" #include "irqs.h" -#include "cputype.h" +#include <linux/soc/mmp/cputype.h> #include "clock.h" #define TIMERS_VIRT_BASE TIMERS1_VIRT_BASE @@ -155,7 +155,8 @@ static void __init timer_config(void) __raw_writel(0x0, mmp_timer_base + TMR_CER); /* disable */ - ccr &= (cpu_is_mmp2()) ? (TMR_CCR_CS_0(0) | TMR_CCR_CS_1(0)) : + ccr &= (cpu_is_mmp2() || cpu_is_mmp3()) ? + (TMR_CCR_CS_0(0) | TMR_CCR_CS_1(0)) : (TMR_CCR_CS_0(3) | TMR_CCR_CS_1(3)); __raw_writel(ccr, mmp_timer_base + TMR_CCR); @@ -195,30 +196,17 @@ void __init mmp_timer_init(int irq, unsigned long rate) clockevents_config_and_register(&ckevt, rate, MIN_DELTA, MAX_DELTA); } -#ifdef CONFIG_OF -static const struct of_device_id mmp_timer_dt_ids[] = { - { .compatible = "mrvl,mmp-timer", }, - {} -}; - -void __init mmp_dt_init_timer(void) +static int __init mmp_dt_init_timer(struct device_node *np) { - struct device_node *np; struct clk *clk; int irq, ret; unsigned long rate; - np = of_find_matching_node(NULL, mmp_timer_dt_ids); - if (!np) { - ret = -ENODEV; - goto out; - } - clk = of_clk_get(np, 0); if (!IS_ERR(clk)) { ret = clk_prepare_enable(clk); if (ret) - goto out; + return ret; rate = clk_get_rate(clk) / 2; } else if (cpu_is_pj4()) { rate = 6500000; @@ -227,18 +215,15 @@ void __init mmp_dt_init_timer(void) } irq = irq_of_parse_and_map(np, 0); - if (!irq) { - ret = -EINVAL; - goto out; - } + if (!irq) + return -EINVAL; + mmp_timer_base = of_iomap(np, 0); - if (!mmp_timer_base) { - ret = -ENOMEM; - goto out; - } + if (!mmp_timer_base) + return -ENOMEM; + mmp_timer_init(irq, rate); - return; -out: - pr_err("Failed to get timer from device tree with error:%d\n", ret); + return 0; } -#endif + +TIMER_OF_DECLARE(mmp_timer, "mrvl,mmp-timer", mmp_dt_init_timer); diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 2a17dc1d122c..948da556162e 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -4,30 +4,25 @@ if ARCH_OMAP1 menu "TI OMAP1 specific features" comment "OMAP Core Type" - depends on ARCH_OMAP1 config ARCH_OMAP730 - depends on ARCH_OMAP1 bool "OMAP730 Based System" select ARCH_OMAP_OTG select CPU_ARM926T select OMAP_MPU_TIMER config ARCH_OMAP850 - depends on ARCH_OMAP1 bool "OMAP850 Based System" select ARCH_OMAP_OTG select CPU_ARM926T config ARCH_OMAP15XX - depends on ARCH_OMAP1 default y bool "OMAP15xx Based System" select CPU_ARM925T select OMAP_MPU_TIMER config ARCH_OMAP16XX - depends on ARCH_OMAP1 bool "OMAP16xx Based System" select ARCH_OMAP_OTG select CPU_ARM926T @@ -35,7 +30,6 @@ config ARCH_OMAP16XX config OMAP_MUX bool "OMAP multiplexing support" - depends on ARCH_OMAP default y help Pin multiplexing support for OMAP boards. If your bootloader @@ -60,25 +54,24 @@ config OMAP_MUX_WARNINGS printed, it's safe to deselect OMAP_MUX for your product. comment "OMAP Board Type" - depends on ARCH_OMAP1 config MACH_OMAP_INNOVATOR bool "TI Innovator" - depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX) + depends on ARCH_OMAP15XX || ARCH_OMAP16XX help TI OMAP 1510 or 1610 Innovator board support. Say Y here if you have such a board. config MACH_OMAP_H2 bool "TI H2 Support" - depends on ARCH_OMAP1 && ARCH_OMAP16XX + depends on ARCH_OMAP16XX help TI OMAP 1610/1611B H2 board support. Say Y here if you have such a board. config MACH_OMAP_H3 bool "TI H3 Support" - depends on ARCH_OMAP1 && ARCH_OMAP16XX + depends on ARCH_OMAP16XX help TI OMAP 1710 H3 board support. Say Y here if you have such a board. @@ -91,7 +84,7 @@ config MACH_HERALD config MACH_OMAP_OSK bool "TI OSK Support" - depends on ARCH_OMAP1 && ARCH_OMAP16XX + depends on ARCH_OMAP16XX help TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here if you have such a board. @@ -106,21 +99,21 @@ config OMAP_OSK_MISTRAL config MACH_OMAP_PERSEUS2 bool "TI Perseus2" - depends on ARCH_OMAP1 && ARCH_OMAP730 + depends on ARCH_OMAP730 help Support for TI OMAP 730 Perseus2 board. Say Y here if you have such a board. config MACH_OMAP_FSAMPLE bool "TI F-Sample" - depends on ARCH_OMAP1 && ARCH_OMAP730 + depends on ARCH_OMAP730 help Support for TI OMAP 850 F-Sample board. Say Y here if you have such a board. config MACH_OMAP_PALMTE bool "Palm Tungsten E" - depends on ARCH_OMAP1 && ARCH_OMAP15XX + depends on ARCH_OMAP15XX help Support for the Palm Tungsten E PDA. To boot the kernel, you'll need a PalmOS compatible bootloader; check out @@ -129,7 +122,7 @@ config MACH_OMAP_PALMTE config MACH_OMAP_PALMZ71 bool "Palm Zire71" - depends on ARCH_OMAP1 && ARCH_OMAP15XX + depends on ARCH_OMAP15XX help Support for the Palm Zire71 PDA. To boot the kernel, you'll need a PalmOS compatible bootloader; check out @@ -138,7 +131,7 @@ config MACH_OMAP_PALMZ71 config MACH_OMAP_PALMTT bool "Palm Tungsten|T" - depends on ARCH_OMAP1 && ARCH_OMAP15XX + depends on ARCH_OMAP15XX help Support for the Palm Tungsten|T PDA. To boot the kernel, you'll need a PalmOS compatible bootloader (Garux); check out @@ -147,7 +140,7 @@ config MACH_OMAP_PALMTT config MACH_SX1 bool "Siemens SX1" - depends on ARCH_OMAP1 && ARCH_OMAP15XX + depends on ARCH_OMAP15XX select I2C help Support for the Siemens SX1 phone. To boot the kernel, @@ -159,14 +152,14 @@ config MACH_SX1 config MACH_NOKIA770 bool "Nokia 770" - depends on ARCH_OMAP1 && ARCH_OMAP16XX + depends on ARCH_OMAP16XX help Support for the Nokia 770 Internet Tablet. Say Y here if you have such a device. config MACH_AMS_DELTA bool "Amstrad E3 (Delta)" - depends on ARCH_OMAP1 && ARCH_OMAP15XX + depends on ARCH_OMAP15XX select FIQ select GPIO_GENERIC_PLATFORM select LEDS_GPIO_REGISTER @@ -178,7 +171,7 @@ config MACH_AMS_DELTA config MACH_OMAP_GENERIC bool "Generic OMAP board" - depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX) + depends on ARCH_OMAP15XX || ARCH_OMAP16XX help Support for generic OMAP-1510, 1610 or 1710 board with no FPGA. Can be used as template for porting Linux to diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c index 0254eb9cf8c6..4eea3e39e633 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq.c +++ b/arch/arm/mach-omap1/ams-delta-fiq.c @@ -110,7 +110,7 @@ void __init ams_delta_init_fiq(struct gpio_chip *chip, /* * FIQ handler takes full control over serio data and clk GPIO - * pins. Initiaize them and keep requested so nobody can + * pins. Initialize them and keep requested so nobody can * interfere. Fail if any of those two couldn't be requested. */ switch (i) { diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index fdb6743760a2..ad08d470a2ca 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -109,6 +109,7 @@ config ARCH_OMAP2PLUS select TI_SYSC select OMAP_IRQCHIP select CLKSRC_TI_32K + select ARCH_HAS_RESET_CONTROLLER help Systems based on OMAP2, OMAP3, OMAP4 or OMAP5 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 8f208197988f..f07cfda85156 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -29,6 +29,11 @@ obj-y += mcbsp.o endif obj-$(CONFIG_TWL4030_CORE) += omap_twl.o + +ifneq ($(CONFIG_MFD_CPCAP),) +obj-y += pmic-cpcap.o +endif + obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o # SMP support ONLY available for OMAP4 @@ -216,9 +221,6 @@ obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o # Platform specific device init code -omap-hsmmc-$(CONFIG_MMC_OMAP_HS) := hsmmc.o -obj-y += $(omap-hsmmc-m) $(omap-hsmmc-y) - obj-y += omap_phy_internal.o obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index f98c8ecc9ca2..dedd47e30b98 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -1147,7 +1147,21 @@ void clkdm_del_autodeps(struct clockdomain *clkdm) /* Clockdomain-to-clock/hwmod framework interface code */ -static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm) +/** + * clkdm_clk_enable - add an enabled downstream clock to this clkdm + * @clkdm: struct clockdomain * + * @clk: struct clk * of the enabled downstream clock + * + * Increment the usecount of the clockdomain @clkdm and ensure that it + * is awake before @clk is enabled. Intended to be called by + * clk_enable() code. If the clockdomain is in software-supervised + * idle mode, force the clockdomain to wake. If the clockdomain is in + * hardware-supervised idle mode, add clkdm-pwrdm autodependencies, to + * ensure that devices in the clockdomain can be read from/written to + * by on-chip processors. Returns -EINVAL if passed null pointers; + * returns 0 upon success or if the clockdomain is in hwsup idle mode. + */ +int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *unused) { if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_enable) return -EINVAL; @@ -1175,33 +1189,6 @@ static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm) } /** - * clkdm_clk_enable - add an enabled downstream clock to this clkdm - * @clkdm: struct clockdomain * - * @clk: struct clk * of the enabled downstream clock - * - * Increment the usecount of the clockdomain @clkdm and ensure that it - * is awake before @clk is enabled. Intended to be called by - * clk_enable() code. If the clockdomain is in software-supervised - * idle mode, force the clockdomain to wake. If the clockdomain is in - * hardware-supervised idle mode, add clkdm-pwrdm autodependencies, to - * ensure that devices in the clockdomain can be read from/written to - * by on-chip processors. Returns -EINVAL if passed null pointers; - * returns 0 upon success or if the clockdomain is in hwsup idle mode. - */ -int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk) -{ - /* - * XXX Rewrite this code to maintain a list of enabled - * downstream clocks for debugging purposes? - */ - - if (!clk) - return -EINVAL; - - return _clkdm_clk_hwmod_enable(clkdm); -} - -/** * clkdm_clk_disable - remove an enabled downstream clock from this clkdm * @clkdm: struct clockdomain * * @clk: struct clk * of the disabled downstream clock @@ -1216,13 +1203,13 @@ int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk) */ int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk) { - if (!clkdm || !clk || !arch_clkdm || !arch_clkdm->clkdm_clk_disable) + if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_disable) return -EINVAL; pwrdm_lock(clkdm->pwrdm.ptr); /* corner case: disabling unused clocks */ - if ((__clk_get_enable_count(clk) == 0) && clkdm->usecount == 0) + if (clk && (__clk_get_enable_count(clk) == 0) && clkdm->usecount == 0) goto ccd_exit; if (clkdm->usecount == 0) { @@ -1277,7 +1264,7 @@ int clkdm_hwmod_enable(struct clockdomain *clkdm, struct omap_hwmod *oh) if (!oh) return -EINVAL; - return _clkdm_clk_hwmod_enable(clkdm); + return clkdm_clk_enable(clkdm, NULL); } /** @@ -1300,35 +1287,10 @@ int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh) if (cpu_is_omap24xx() || cpu_is_omap34xx()) return 0; - /* - * XXX Rewrite this code to maintain a list of enabled - * downstream hwmods for debugging purposes? - */ - - if (!clkdm || !oh || !arch_clkdm || !arch_clkdm->clkdm_clk_disable) + if (!oh) return -EINVAL; - pwrdm_lock(clkdm->pwrdm.ptr); - - if (clkdm->usecount == 0) { - pwrdm_unlock(clkdm->pwrdm.ptr); - WARN_ON(1); /* underflow */ - return -ERANGE; - } - - clkdm->usecount--; - if (clkdm->usecount > 0) { - pwrdm_unlock(clkdm->pwrdm.ptr); - return 0; - } - - arch_clkdm->clkdm_clk_disable(clkdm); - pwrdm_state_switch_nolock(clkdm->pwrdm.ptr); - pwrdm_unlock(clkdm->pwrdm.ptr); - - pr_debug("clockdomain: %s: disabled\n", clkdm->name); - - return 0; + return clkdm_clk_disable(clkdm, NULL); } /** diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 6316da3623b3..223b37c48389 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -352,7 +352,6 @@ void omap_pcs_legacy_init(int irq, void (*rearm)(void)); struct omap_sdrc_params; extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0, struct omap_sdrc_params *sdrc_cs1); -struct omap2_hsmmc_info; extern void omap_reserve(void); struct omap_hwmod; diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index c84b5e260617..73338cf80d76 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -684,7 +684,7 @@ static u32 am33xx_control_vals[ARRAY_SIZE(am43xx_control_reg_offsets)]; * * Save the wkup domain registers */ -void am43xx_control_save_context(void) +static void am43xx_control_save_context(void) { int i; @@ -698,7 +698,7 @@ void am43xx_control_save_context(void) * * Restore the wkup domain registers */ -void am43xx_control_restore_context(void) +static void am43xx_control_restore_context(void) { int i; diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index 393b42110511..eceb4b09adb2 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -195,6 +195,7 @@ #define OMAP44XX_CONTROL_FUSE_MPU_OPP100 0x243 #define OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO 0x246 #define OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO 0x249 +#define OMAP44XX_CONTROL_FUSE_MPU_OPPNITROSB 0x24C #define OMAP44XX_CONTROL_FUSE_CORE_OPP50 0x254 #define OMAP44XX_CONTROL_FUSE_CORE_OPP100 0x257 #define OMAP44XX_CONTROL_FUSE_CORE_OPP100OV 0x25A diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 439e143cad7b..46012ca812f4 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -265,6 +265,7 @@ static int __init omapdss_init_of(void) r = of_platform_populate(node, NULL, NULL, &pdev->dev); if (r) { pr_err("Unable to populate DSS submodule devices\n"); + put_device(&pdev->dev); return r; } diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c deleted file mode 100644 index 63423ea6a240..000000000000 --- a/arch/arm/mach-omap2/hsmmc.c +++ /dev/null @@ -1,171 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-omap2/hsmmc.c - * - * Copyright (C) 2007-2008 Texas Instruments - * Copyright (C) 2008 Nokia Corporation - * Author: Texas Instruments - */ -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/delay.h> -#include <linux/mmc/host.h> -#include <linux/platform_data/hsmmc-omap.h> - -#include "soc.h" -#include "omap_device.h" - -#include "hsmmc.h" -#include "control.h" - -#if IS_ENABLED(CONFIG_MMC_OMAP_HS) - -static u16 control_pbias_offset; -static u16 control_devconf1_offset; - -#define HSMMC_NAME_LEN 9 - -static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, - struct omap_hsmmc_platform_data *mmc) -{ - char *hc_name; - - hc_name = kzalloc(HSMMC_NAME_LEN + 1, GFP_KERNEL); - if (!hc_name) - return -ENOMEM; - - snprintf(hc_name, (HSMMC_NAME_LEN + 1), "mmc%islot%i", c->mmc, 1); - mmc->name = hc_name; - mmc->caps = c->caps; - mmc->reg_offset = 0; - - return 0; -} - -static int omap_hsmmc_done; - -void omap_hsmmc_late_init(struct omap2_hsmmc_info *c) -{ - struct platform_device *pdev; - int res; - - if (omap_hsmmc_done) - return; - - omap_hsmmc_done = 1; - - for (; c->mmc; c++) { - pdev = c->pdev; - if (!pdev) - continue; - res = omap_device_register(pdev); - if (res) - pr_err("Could not late init MMC\n"); - } -} - -#define MAX_OMAP_MMC_HWMOD_NAME_LEN 16 - -static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo, - int ctrl_nr) -{ - struct omap_hwmod *oh; - struct omap_hwmod *ohs[1]; - struct omap_device *od; - struct platform_device *pdev; - char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN]; - struct omap_hsmmc_platform_data *mmc_data; - struct omap_hsmmc_dev_attr *mmc_dev_attr; - char *name; - int res; - - mmc_data = kzalloc(sizeof(*mmc_data), GFP_KERNEL); - if (!mmc_data) - return; - - res = omap_hsmmc_pdata_init(hsmmcinfo, mmc_data); - if (res < 0) - goto free_mmc; - - name = "omap_hsmmc"; - res = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN, - "mmc%d", ctrl_nr); - WARN(res >= MAX_OMAP_MMC_HWMOD_NAME_LEN, - "String buffer overflow in MMC%d device setup\n", ctrl_nr); - - oh = omap_hwmod_lookup(oh_name); - if (!oh) { - pr_err("Could not look up %s\n", oh_name); - goto free_name; - } - ohs[0] = oh; - if (oh->dev_attr != NULL) { - mmc_dev_attr = oh->dev_attr; - mmc_data->controller_flags = mmc_dev_attr->flags; - } - - pdev = platform_device_alloc(name, ctrl_nr - 1); - if (!pdev) { - pr_err("Could not allocate pdev for %s\n", name); - goto free_name; - } - dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id); - - od = omap_device_alloc(pdev, ohs, 1); - if (IS_ERR(od)) { - pr_err("Could not allocate od for %s\n", name); - goto put_pdev; - } - - res = platform_device_add_data(pdev, mmc_data, - sizeof(struct omap_hsmmc_platform_data)); - if (res) { - pr_err("Could not add pdata for %s\n", name); - goto put_pdev; - } - - hsmmcinfo->pdev = pdev; - - res = omap_device_register(pdev); - if (res) { - pr_err("Could not register od for %s\n", name); - goto free_od; - } - - goto free_mmc; - -free_od: - omap_device_delete(od); - -put_pdev: - platform_device_put(pdev); - -free_name: - kfree(mmc_data->name); - -free_mmc: - kfree(mmc_data); -} - -void __init omap_hsmmc_init(struct omap2_hsmmc_info *controllers) -{ - if (omap_hsmmc_done) - return; - - omap_hsmmc_done = 1; - - if (cpu_is_omap2430()) { - control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE; - control_devconf1_offset = OMAP243X_CONTROL_DEVCONF1; - } else { - control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE; - control_devconf1_offset = OMAP343X_CONTROL_DEVCONF1; - } - - for (; controllers->mmc; controllers++) - omap_hsmmc_init_one(controllers, controllers->mmc); - -} - -#endif diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h deleted file mode 100644 index 76c5ed2afa72..000000000000 --- a/arch/arm/mach-omap2/hsmmc.h +++ /dev/null @@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * MMC definitions for OMAP2 - */ - -struct mmc_card; - -struct omap2_hsmmc_info { - u8 mmc; /* controller 1/2/3 */ - u32 caps; /* 4/8 wires and any additional host - * capabilities OR'd (ref. linux/mmc/host.h) */ - struct platform_device *pdev; /* mmc controller instance */ - /* init some special card */ - void (*init_card)(struct mmc_card *card); -}; - -#if IS_ENABLED(CONFIG_MMC_OMAP_HS) - -void omap_hsmmc_init(struct omap2_hsmmc_info *); -void omap_hsmmc_late_init(struct omap2_hsmmc_info *); - -#else - -static inline void omap_hsmmc_init(struct omap2_hsmmc_info *info) -{ -} - -static inline void omap_hsmmc_late_init(struct omap2_hsmmc_info *info) -{ -} - -#endif diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 2d8f90546591..67fa28532a3a 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -227,7 +227,6 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) { struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu); unsigned int save_state = 0, cpu_logic_state = PWRDM_POWER_RET; - unsigned int wakeup_cpu; if (omap_rev() == OMAP4430_REV_ES1_0) return -ENXIO; @@ -292,7 +291,6 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) * secure devices, CPUx does WFI which can result in * domain transition */ - wakeup_cpu = smp_processor_id(); pwrdm_set_next_pwrst(pm_info->pwrdm, PWRDM_POWER_ON); pwrdm_post_transition(NULL); diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 3acb4192918d..1d55602b3f8f 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -119,11 +119,7 @@ static void _add_hwmod_clocks_clkdev(struct omap_device *od, /** * omap_device_build_from_dt - build an omap_device with multiple hwmods - * @pdev_name: name of the platform_device driver to use - * @pdev_id: this platform_device's connection ID - * @oh: ptr to the single omap_hwmod that backs this omap_device - * @pdata: platform_data ptr to associate with the platform_device - * @pdata_len: amount of memory pointed to by @pdata + * @pdev: The platform device to update. * * Function for building an omap_device already registered from device-tree * @@ -292,7 +288,7 @@ static int _omap_device_idle_hwmods(struct omap_device *od) /** * omap_device_get_context_loss_count - get lost context count - * @od: struct omap_device * + * @pdev: The platform device to update. * * Using the primary hwmod, query the context loss count for this * device. @@ -321,9 +317,8 @@ int omap_device_get_context_loss_count(struct platform_device *pdev) /** * omap_device_alloc - allocate an omap_device * @pdev: platform_device that will be included in this omap_device - * @oh: ptr to the single omap_hwmod that backs this omap_device - * @pdata: platform_data ptr to associate with the platform_device - * @pdata_len: amount of memory pointed to by @pdata + * @ohs: ptr to the omap_hwmod for this omap_device + * @oh_cnt: the size of the ohs list * * Convenience function for allocating an omap_device structure and filling * hwmods, and resources. @@ -649,7 +644,7 @@ struct dev_pm_domain omap_device_pm_domain = { /** * omap_device_register - register an omap_device with one omap_hwmod - * @od: struct omap_device * to register + * @pdev: the platform device (omap_device) to register. * * Register the omap_device structure. This currently just calls * platform_device_register() on the underlying platform_device. @@ -668,7 +663,7 @@ int omap_device_register(struct platform_device *pdev) /** * omap_device_enable - fully activate an omap_device - * @od: struct omap_device * to activate + * @pdev: the platform device to activate * * Do whatever is necessary for the hwmods underlying omap_device @od * to be accessible and ready to operate. This generally involves @@ -702,7 +697,7 @@ int omap_device_enable(struct platform_device *pdev) /** * omap_device_idle - idle an omap_device - * @od: struct omap_device * to idle + * @pdev: The platform_device (omap_device) to idle * * Idle omap_device @od. Device drivers call this function indirectly * via pm_runtime_put*(). Returns -EINVAL if the omap_device is not diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 203664c40d3d..a136788db839 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -623,39 +623,6 @@ static int _enable_wakeup(struct omap_hwmod *oh, u32 *v) return 0; } -/** - * _disable_wakeup: clear OCP_SYSCONFIG.ENAWAKEUP bit in the hardware - * @oh: struct omap_hwmod * - * - * Prevent the hardware module @oh to send wakeups. Returns -EINVAL - * upon error or 0 upon success. - */ -static int _disable_wakeup(struct omap_hwmod *oh, u32 *v) -{ - if (!oh->class->sysc || - !((oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP) || - (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) || - (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP))) - return -EINVAL; - - if (!oh->class->sysc->sysc_fields) { - WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name); - return -EINVAL; - } - - if (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP) - *v &= ~(0x1 << oh->class->sysc->sysc_fields->enwkup_shift); - - if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) - _set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART, v); - if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP) - _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART, v); - - /* XXX test pwrdm_get_wken for this hwmod's subsystem */ - - return 0; -} - static struct clockdomain *_get_clkdm(struct omap_hwmod *oh) { struct clk_hw_omap *clk; @@ -3868,70 +3835,6 @@ void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh) */ /** - * omap_hwmod_enable_wakeup - allow device to wake up the system - * @oh: struct omap_hwmod * - * - * Sets the module OCP socket ENAWAKEUP bit to allow the module to - * send wakeups to the PRCM, and enable I/O ring wakeup events for - * this IP block if it has dynamic mux entries. Eventually this - * should set PRCM wakeup registers to cause the PRCM to receive - * wakeup events from the module. Does not set any wakeup routing - * registers beyond this point - if the module is to wake up any other - * module or subsystem, that must be set separately. Called by - * omap_device code. Returns -EINVAL on error or 0 upon success. - */ -int omap_hwmod_enable_wakeup(struct omap_hwmod *oh) -{ - unsigned long flags; - u32 v; - - spin_lock_irqsave(&oh->_lock, flags); - - if (oh->class->sysc && - (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) { - v = oh->_sysc_cache; - _enable_wakeup(oh, &v); - _write_sysconfig(v, oh); - } - - spin_unlock_irqrestore(&oh->_lock, flags); - - return 0; -} - -/** - * omap_hwmod_disable_wakeup - prevent device from waking the system - * @oh: struct omap_hwmod * - * - * Clears the module OCP socket ENAWAKEUP bit to prevent the module - * from sending wakeups to the PRCM, and disable I/O ring wakeup - * events for this IP block if it has dynamic mux entries. Eventually - * this should clear PRCM wakeup registers to cause the PRCM to ignore - * wakeup events from the module. Does not set any wakeup routing - * registers beyond this point - if the module is to wake up any other - * module or subsystem, that must be set separately. Called by - * omap_device code. Returns -EINVAL on error or 0 upon success. - */ -int omap_hwmod_disable_wakeup(struct omap_hwmod *oh) -{ - unsigned long flags; - u32 v; - - spin_lock_irqsave(&oh->_lock, flags); - - if (oh->class->sysc && - (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) { - v = oh->_sysc_cache; - _disable_wakeup(oh, &v); - _write_sysconfig(v, oh); - } - - spin_unlock_irqrestore(&oh->_lock, flags); - - return 0; -} - -/** * omap_hwmod_assert_hardreset - assert the HW reset line of submodules * contained in the hwmod module. * @oh: struct omap_hwmod * diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index ef1bb08b1a2d..2d0fd99d4713 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -646,9 +646,6 @@ int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type, struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh); void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh); -int omap_hwmod_enable_wakeup(struct omap_hwmod *oh); -int omap_hwmod_disable_wakeup(struct omap_hwmod *oh); - int omap_hwmod_for_each_by_class(const char *classname, int (*fn)(struct omap_hwmod *oh, void *user), diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h index 3de3d7a115b3..26e13d4fa19c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h @@ -35,10 +35,7 @@ extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0; extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1; extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2; extern struct omap_hwmod_ocp_if am33xx_l3_s__gpmc; -extern struct omap_hwmod_ocp_if am33xx_l4_per__mailbox; extern struct omap_hwmod_ocp_if am33xx_l4_ls__spinlock; -extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp0; -extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp1; extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi0; extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi1; extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer2; @@ -54,7 +51,6 @@ extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc2; extern struct omap_hwmod_ocp_if am33xx_l3_main__ocmc; extern struct omap_hwmod_ocp_if am33xx_l3_main__sha0; extern struct omap_hwmod_ocp_if am33xx_l3_main__aes0; -extern struct omap_hwmod_ocp_if am33xx_l4_per__rng; extern struct omap_hwmod am33xx_l3_main_hwmod; extern struct omap_hwmod am33xx_l3_s_hwmod; @@ -67,7 +63,6 @@ extern struct omap_hwmod am33xx_gfx_hwmod; extern struct omap_hwmod am33xx_prcm_hwmod; extern struct omap_hwmod am33xx_aes0_hwmod; extern struct omap_hwmod am33xx_sha0_hwmod; -extern struct omap_hwmod am33xx_rng_hwmod; extern struct omap_hwmod am33xx_ocmcram_hwmod; extern struct omap_hwmod am33xx_smartreflex0_hwmod; extern struct omap_hwmod am33xx_smartreflex1_hwmod; @@ -78,9 +73,6 @@ extern struct omap_hwmod am33xx_epwmss0_hwmod; extern struct omap_hwmod am33xx_epwmss1_hwmod; extern struct omap_hwmod am33xx_epwmss2_hwmod; extern struct omap_hwmod am33xx_gpmc_hwmod; -extern struct omap_hwmod am33xx_mailbox_hwmod; -extern struct omap_hwmod am33xx_mcasp0_hwmod; -extern struct omap_hwmod am33xx_mcasp1_hwmod; extern struct omap_hwmod am33xx_rtc_hwmod; extern struct omap_hwmod am33xx_spi0_hwmod; extern struct omap_hwmod am33xx_spi1_hwmod; @@ -96,7 +88,6 @@ extern struct omap_hwmod am33xx_tpcc_hwmod; extern struct omap_hwmod am33xx_tptc0_hwmod; extern struct omap_hwmod am33xx_tptc1_hwmod; extern struct omap_hwmod am33xx_tptc2_hwmod; -extern struct omap_hwmod am33xx_wd_timer1_hwmod; extern struct omap_hwmod_class am33xx_emif_hwmod_class; extern struct omap_hwmod_class am33xx_l4_hwmod_class; diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c index 63698ffa6d27..7123c455aaa9 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c @@ -158,14 +158,6 @@ struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = { .user = OCP_USER_MPU, }; -/* l4 ls -> mailbox */ -struct omap_hwmod_ocp_if am33xx_l4_per__mailbox = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_mailbox_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - /* l4 ls -> spinlock */ struct omap_hwmod_ocp_if am33xx_l4_ls__spinlock = { .master = &am33xx_l4_ls_hwmod, @@ -174,22 +166,6 @@ struct omap_hwmod_ocp_if am33xx_l4_ls__spinlock = { .user = OCP_USER_MPU, }; -/* l4 ls -> mcasp0 */ -struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp0 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_mcasp0_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -/* l4 ls -> mcasp1 */ -struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp1 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_mcasp1_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - /* l4 ls -> mcspi0 */ struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi0 = { .master = &am33xx_l4_ls_hwmod, @@ -308,11 +284,3 @@ struct omap_hwmod_ocp_if am33xx_l3_main__aes0 = { .clk = "aes0_fck", .user = OCP_USER_MPU | OCP_USER_SDMA, }; - -/* l4 per -> rng */ -struct omap_hwmod_ocp_if am33xx_l4_per__rng = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_rng_hwmod, - .clk = "rng_fck", - .user = OCP_USER_MPU, -}; diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c index 29fd13684a68..2df8659612ef 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c @@ -17,7 +17,6 @@ #include <linux/types.h> #include "omap_hwmod.h" -#include "wd_timer.h" #include "cm33xx.h" #include "prm33xx.h" #include "omap_hwmod_33xx_43xx_common_data.h" @@ -266,33 +265,6 @@ struct omap_hwmod am33xx_sha0_hwmod = { }, }; -/* rng */ -static struct omap_hwmod_class_sysconfig am33xx_rng_sysc = { - .rev_offs = 0x1fe0, - .sysc_offs = 0x1fe4, - .sysc_flags = SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE, - .idlemodes = SIDLE_FORCE | SIDLE_NO, - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class am33xx_rng_hwmod_class = { - .name = "rng", - .sysc = &am33xx_rng_sysc, -}; - -struct omap_hwmod am33xx_rng_hwmod = { - .name = "rng", - .class = &am33xx_rng_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_SWSUP_SIDLE, - .main_clk = "rng_fck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - /* ocmcram */ static struct omap_hwmod_class am33xx_ocmcram_hwmod_class = { .name = "ocmcram", @@ -466,86 +438,6 @@ struct omap_hwmod am33xx_epwmss2_hwmod = { }, }; -/* - * 'gpio' class: for gpio 0,1,2,3 - */ -static struct omap_hwmod_class_sysconfig am33xx_gpio_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0114, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class am33xx_gpio_hwmod_class = { - .name = "gpio", - .sysc = &am33xx_gpio_sysc, -}; - -/* gpio1 */ -static struct omap_hwmod_opt_clk gpio1_opt_clks[] = { - { .role = "dbclk", .clk = "gpio1_dbclk" }, -}; - -static struct omap_hwmod am33xx_gpio1_hwmod = { - .name = "gpio2", - .class = &am33xx_gpio_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4ls_gclk", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = gpio1_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio1_opt_clks), -}; - -/* gpio2 */ -static struct omap_hwmod_opt_clk gpio2_opt_clks[] = { - { .role = "dbclk", .clk = "gpio2_dbclk" }, -}; - -static struct omap_hwmod am33xx_gpio2_hwmod = { - .name = "gpio3", - .class = &am33xx_gpio_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4ls_gclk", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = gpio2_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio2_opt_clks), -}; - -/* gpio3 */ -static struct omap_hwmod_opt_clk gpio3_opt_clks[] = { - { .role = "dbclk", .clk = "gpio3_dbclk" }, -}; - -static struct omap_hwmod am33xx_gpio3_hwmod = { - .name = "gpio4", - .class = &am33xx_gpio_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4ls_gclk", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = gpio3_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio3_opt_clks), -}; - /* gpmc */ static struct omap_hwmod_class_sysconfig gpmc_sysc = { .rev_offs = 0x0, @@ -576,78 +468,6 @@ struct omap_hwmod am33xx_gpmc_hwmod = { }, }; -/* - * 'mailbox' class - * mailbox module allowing communication between the on-chip processors using a - * queued mailbox-interrupt mechanism. - */ -static struct omap_hwmod_class_sysconfig am33xx_mailbox_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class am33xx_mailbox_hwmod_class = { - .name = "mailbox", - .sysc = &am33xx_mailbox_sysc, -}; - -struct omap_hwmod am33xx_mailbox_hwmod = { - .name = "mailbox", - .class = &am33xx_mailbox_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "l4ls_gclk", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'mcasp' class - */ -static struct omap_hwmod_class_sysconfig am33xx_mcasp_sysc = { - .rev_offs = 0x0, - .sysc_offs = 0x4, - .sysc_flags = SYSC_HAS_SIDLEMODE, - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type3, -}; - -static struct omap_hwmod_class am33xx_mcasp_hwmod_class = { - .name = "mcasp", - .sysc = &am33xx_mcasp_sysc, -}; - -/* mcasp0 */ -struct omap_hwmod am33xx_mcasp0_hwmod = { - .name = "mcasp0", - .class = &am33xx_mcasp_hwmod_class, - .clkdm_name = "l3s_clkdm", - .main_clk = "mcasp0_fck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* mcasp1 */ -struct omap_hwmod am33xx_mcasp1_hwmod = { - .name = "mcasp1", - .class = &am33xx_mcasp_hwmod_class, - .clkdm_name = "l3s_clkdm", - .main_clk = "mcasp1_fck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; /* * 'rtc' class @@ -950,41 +770,6 @@ struct omap_hwmod am33xx_tptc2_hwmod = { }, }; -/* 'wd_timer' class */ -static struct omap_hwmod_class_sysconfig wdt_sysc = { - .rev_offs = 0x0, - .sysc_offs = 0x10, - .syss_offs = 0x14, - .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class am33xx_wd_timer_hwmod_class = { - .name = "wd_timer", - .sysc = &wdt_sysc, - .pre_shutdown = &omap2_wd_timer_disable, -}; - -/* - * XXX: device.c file uses hardcoded name for watchdog timer - * driver "wd_timer2, so we are also using same name as of now... - */ -struct omap_hwmod am33xx_wd_timer1_hwmod = { - .name = "wd_timer2", - .class = &am33xx_wd_timer_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .flags = HWMOD_SWSUP_SIDLE, - .main_clk = "wdt1_fck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - static void omap_hwmod_am33xx_clkctrl(void) { CLKCTRL(am33xx_dcan0_hwmod, AM33XX_CM_PER_DCAN0_CLKCTRL_OFFSET); @@ -993,12 +778,6 @@ static void omap_hwmod_am33xx_clkctrl(void) CLKCTRL(am33xx_epwmss0_hwmod, AM33XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET); CLKCTRL(am33xx_epwmss1_hwmod, AM33XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET); CLKCTRL(am33xx_epwmss2_hwmod, AM33XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET); - CLKCTRL(am33xx_gpio1_hwmod, AM33XX_CM_PER_GPIO1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_gpio2_hwmod, AM33XX_CM_PER_GPIO2_CLKCTRL_OFFSET); - CLKCTRL(am33xx_gpio3_hwmod, AM33XX_CM_PER_GPIO3_CLKCTRL_OFFSET); - CLKCTRL(am33xx_mailbox_hwmod, AM33XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET); - CLKCTRL(am33xx_mcasp0_hwmod, AM33XX_CM_PER_MCASP0_CLKCTRL_OFFSET); - CLKCTRL(am33xx_mcasp1_hwmod, AM33XX_CM_PER_MCASP1_CLKCTRL_OFFSET); CLKCTRL(am33xx_spi0_hwmod, AM33XX_CM_PER_SPI0_CLKCTRL_OFFSET); CLKCTRL(am33xx_spi1_hwmod, AM33XX_CM_PER_SPI1_CLKCTRL_OFFSET); CLKCTRL(am33xx_spinlock_hwmod, AM33XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET); @@ -1013,7 +792,6 @@ static void omap_hwmod_am33xx_clkctrl(void) CLKCTRL(am33xx_smartreflex1_hwmod, AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET); CLKCTRL(am33xx_timer1_hwmod, AM33XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_wd_timer1_hwmod, AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET); CLKCTRL(am33xx_rtc_hwmod, AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET); PRCM_FLAGS(am33xx_rtc_hwmod, HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET); CLKCTRL(am33xx_gpmc_hwmod, AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET); @@ -1031,7 +809,6 @@ static void omap_hwmod_am33xx_clkctrl(void) CLKCTRL(am33xx_ocmcram_hwmod , AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET); CLKCTRL(am33xx_sha0_hwmod , AM33XX_CM_PER_SHA0_CLKCTRL_OFFSET); CLKCTRL(am33xx_aes0_hwmod , AM33XX_CM_PER_AES0_CLKCTRL_OFFSET); - CLKCTRL(am33xx_rng_hwmod, AM33XX_CM_PER_RNG_CLKCTRL_OFFSET); } static void omap_hwmod_am33xx_rst(void) @@ -1055,12 +832,6 @@ static void omap_hwmod_am43xx_clkctrl(void) CLKCTRL(am33xx_epwmss0_hwmod, AM43XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET); CLKCTRL(am33xx_epwmss1_hwmod, AM43XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET); CLKCTRL(am33xx_epwmss2_hwmod, AM43XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET); - CLKCTRL(am33xx_gpio1_hwmod, AM43XX_CM_PER_GPIO1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_gpio2_hwmod, AM43XX_CM_PER_GPIO2_CLKCTRL_OFFSET); - CLKCTRL(am33xx_gpio3_hwmod, AM43XX_CM_PER_GPIO3_CLKCTRL_OFFSET); - CLKCTRL(am33xx_mailbox_hwmod, AM43XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET); - CLKCTRL(am33xx_mcasp0_hwmod, AM43XX_CM_PER_MCASP0_CLKCTRL_OFFSET); - CLKCTRL(am33xx_mcasp1_hwmod, AM43XX_CM_PER_MCASP1_CLKCTRL_OFFSET); CLKCTRL(am33xx_spi0_hwmod, AM43XX_CM_PER_SPI0_CLKCTRL_OFFSET); CLKCTRL(am33xx_spi1_hwmod, AM43XX_CM_PER_SPI1_CLKCTRL_OFFSET); CLKCTRL(am33xx_spinlock_hwmod, AM43XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET); @@ -1075,7 +846,6 @@ static void omap_hwmod_am43xx_clkctrl(void) CLKCTRL(am33xx_smartreflex1_hwmod, AM43XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET); CLKCTRL(am33xx_timer1_hwmod, AM43XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_wd_timer1_hwmod, AM43XX_CM_WKUP_WDT1_CLKCTRL_OFFSET); CLKCTRL(am33xx_rtc_hwmod, AM43XX_CM_RTC_RTC_CLKCTRL_OFFSET); CLKCTRL(am33xx_gpmc_hwmod, AM43XX_CM_PER_GPMC_CLKCTRL_OFFSET); CLKCTRL(am33xx_l4_ls_hwmod, AM43XX_CM_PER_L4LS_CLKCTRL_OFFSET); @@ -1092,7 +862,6 @@ static void omap_hwmod_am43xx_clkctrl(void) CLKCTRL(am33xx_ocmcram_hwmod , AM43XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET); CLKCTRL(am33xx_sha0_hwmod , AM43XX_CM_PER_SHA0_CLKCTRL_OFFSET); CLKCTRL(am33xx_aes0_hwmod , AM43XX_CM_PER_AES0_CLKCTRL_OFFSET); - CLKCTRL(am33xx_rng_hwmod, AM43XX_CM_PER_RNG_CLKCTRL_OFFSET); } static void omap_hwmod_am43xx_rst(void) diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 54524775f278..c63f66427e46 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -21,7 +21,6 @@ #include "cm33xx.h" #include "prm33xx.h" #include "prm-regbits-33xx.h" -#include "wd_timer.h" #include "omap_hwmod_33xx_43xx_common_data.h" /* @@ -257,39 +256,6 @@ static struct omap_hwmod am33xx_lcdc_hwmod = { }; /* - * 'usb_otg' class - * high-speed on-the-go universal serial bus (usb_otg) controller - */ -static struct omap_hwmod_class_sysconfig am33xx_usbhsotg_sysc = { - .rev_offs = 0x0, - .sysc_offs = 0x10, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class am33xx_usbotg_class = { - .name = "usbotg", - .sysc = &am33xx_usbhsotg_sysc, -}; - -static struct omap_hwmod am33xx_usbss_hwmod = { - .name = "usb_otg_hs", - .class = &am33xx_usbotg_class, - .clkdm_name = "l3s_clkdm", - .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, - .main_clk = "usbotg_fck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_USB0_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - - -/* * Interfaces */ @@ -388,24 +354,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_wkup__timer1 = { .user = OCP_USER_MPU, }; -/* l4 wkup -> wd_timer1 */ -static struct omap_hwmod_ocp_if am33xx_l4_wkup__wd_timer1 = { - .master = &am33xx_l4_wkup_hwmod, - .slave = &am33xx_wd_timer1_hwmod, - .clk = "dpll_core_m4_div2_ck", - .user = OCP_USER_MPU, -}; - -/* usbss */ -/* l3 s -> USBSS interface */ -static struct omap_hwmod_ocp_if am33xx_l3_s__usbss = { - .master = &am33xx_l3_s_hwmod, - .slave = &am33xx_usbss_hwmod, - .clk = "l3s_gclk", - .user = OCP_USER_MPU, - .flags = OCPIF_SWSUP_IDLE, -}; - static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l3_main__emif, &am33xx_mpu__l3_main, @@ -428,13 +376,9 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l4_wkup__timer1, &am33xx_l4_wkup__rtc, &am33xx_l4_wkup__adc_tsc, - &am33xx_l4_wkup__wd_timer1, &am33xx_l4_hs__pruss, &am33xx_l4_per__dcan0, &am33xx_l4_per__dcan1, - &am33xx_l4_per__mailbox, - &am33xx_l4_ls__mcasp0, - &am33xx_l4_ls__mcasp1, &am33xx_l4_ls__timer2, &am33xx_l4_ls__timer3, &am33xx_l4_ls__timer4, @@ -455,10 +399,8 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l3_main__tptc1, &am33xx_l3_main__tptc2, &am33xx_l3_main__ocmc, - &am33xx_l3_s__usbss, &am33xx_l3_main__sha0, &am33xx_l3_main__aes0, - &am33xx_l4_per__rng, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c index 5c3db6b6438b..b81f83466c94 100644 --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c @@ -18,8 +18,6 @@ #include "omap_hwmod_33xx_43xx_common_data.h" #include "prcm43xx.h" #include "omap_hwmod_common_data.h" -#include "hdq1w.h" - /* IP blocks */ static struct omap_hwmod am43xx_emif_hwmod = { @@ -468,32 +466,6 @@ static struct omap_hwmod am43xx_dss_rfbi_hwmod = { .parent_hwmod = &am43xx_dss_core_hwmod, }; -/* HDQ1W */ -static struct omap_hwmod_class_sysconfig am43xx_hdq1w_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0014, - .syss_offs = 0x0018, - .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class am43xx_hdq1w_hwmod_class = { - .name = "hdq1w", - .sysc = &am43xx_hdq1w_sysc, - .reset = &omap_hdq1w_reset, -}; - -static struct omap_hwmod am43xx_hdq1w_hwmod = { - .name = "hdq1w", - .class = &am43xx_hdq1w_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = AM43XX_CM_PER_HDQ1W_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; static struct omap_hwmod_class_sysconfig am43xx_vpfe_sysc = { .rev_offs = 0x0, @@ -604,13 +576,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_wkup__timer1 = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_ocp_if am43xx_l4_wkup__wd_timer1 = { - .master = &am33xx_l4_wkup_hwmod, - .slave = &am33xx_wd_timer1_hwmod, - .clk = "sys_clkin_ck", - .user = OCP_USER_MPU, -}; - static struct omap_hwmod_ocp_if am33xx_l4_wkup__synctimer = { .master = &am33xx_l4_wkup_hwmod, .slave = &am43xx_synctimer_hwmod, @@ -751,13 +716,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_rfbi = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_ocp_if am43xx_l4_ls__hdq1w = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am43xx_hdq1w_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - static struct omap_hwmod_ocp_if am43xx_l3__vpfe0 = { .master = &am43xx_vpfe0_hwmod, .slave = &am33xx_l3_main_hwmod, @@ -824,15 +782,10 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am43xx_l4_wkup__smartreflex0, &am43xx_l4_wkup__smartreflex1, &am43xx_l4_wkup__timer1, - &am43xx_l4_wkup__wd_timer1, &am43xx_l4_wkup__adc_tsc, &am43xx_l3_s__qspi, &am33xx_l4_per__dcan0, &am33xx_l4_per__dcan1, - &am33xx_l4_per__mailbox, - &am33xx_l4_per__rng, - &am33xx_l4_ls__mcasp0, - &am33xx_l4_ls__mcasp1, &am33xx_l4_ls__timer2, &am33xx_l4_ls__timer3, &am33xx_l4_ls__timer4, @@ -863,7 +816,6 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am43xx_l4_ls__dss, &am43xx_l4_ls__dss_dispc, &am43xx_l4_ls__dss_rfbi, - &am43xx_l4_ls__hdq1w, &am43xx_l3__vpfe0, &am43xx_l3__vpfe1, &am43xx_l4_ls__vpfe0, diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 28ea2960a9b2..292f544bd62d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -790,7 +790,7 @@ static struct omap_hwmod_class omap44xx_sha0_hwmod_class = { .sysc = &omap44xx_sha0_sysc, }; -struct omap_hwmod omap44xx_sha0_hwmod = { +static struct omap_hwmod omap44xx_sha0_hwmod = { .name = "sham", .class = &omap44xx_sha0_hwmod_class, .clkdm_name = "l4_secure_clkdm", @@ -974,7 +974,7 @@ static struct omap_hwmod omap44xx_des_hwmod = { }, }; -struct omap_hwmod_ocp_if omap44xx_l3_main_2__des = { +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__des = { .master = &omap44xx_l3_main_2_hwmod, .slave = &omap44xx_des_hwmod, .clk = "l3_div_ck", @@ -1061,40 +1061,6 @@ static struct omap_hwmod omap44xx_gpmc_hwmod = { }, }; -/* - * 'hdq1w' class - * hdq / 1-wire serial interface controller - */ - -static struct omap_hwmod_class_sysconfig omap44xx_hdq1w_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0014, - .syss_offs = 0x0018, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SOFTRESET | - SYSS_HAS_RESET_STATUS), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap44xx_hdq1w_hwmod_class = { - .name = "hdq1w", - .sysc = &omap44xx_hdq1w_sysc, -}; - -/* hdq1w */ -static struct omap_hwmod omap44xx_hdq1w_hwmod = { - .name = "hdq1w", - .class = &omap44xx_hdq1w_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_INIT_NO_RESET, /* XXX temporary */ - .main_clk = "func_12m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_HDQ1W_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_HDQ1W_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; /* * 'hsi' class @@ -1288,180 +1254,6 @@ static struct omap_hwmod omap44xx_kbd_hwmod = { }, }; -/* - * 'mailbox' class - * mailbox module allowing communication between the on-chip processors using a - * queued mailbox-interrupt mechanism. - */ - -static struct omap_hwmod_class_sysconfig omap44xx_mailbox_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class omap44xx_mailbox_hwmod_class = { - .name = "mailbox", - .sysc = &omap44xx_mailbox_sysc, -}; - -/* mailbox */ -static struct omap_hwmod omap44xx_mailbox_hwmod = { - .name = "mailbox", - .class = &omap44xx_mailbox_hwmod_class, - .clkdm_name = "l4_cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4CFG_MAILBOX_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4CFG_MAILBOX_CONTEXT_OFFSET, - }, - }, -}; - -/* - * 'mcasp' class - * multi-channel audio serial port controller - */ - -/* The IP is not compliant to type1 / type2 scheme */ -static struct omap_hwmod_class_sysconfig omap44xx_mcasp_sysc = { - .rev_offs = 0, - .sysc_offs = 0x0004, - .sysc_flags = SYSC_HAS_SIDLEMODE, - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type_mcasp, -}; - -static struct omap_hwmod_class omap44xx_mcasp_hwmod_class = { - .name = "mcasp", - .sysc = &omap44xx_mcasp_sysc, -}; - -/* mcasp */ -static struct omap_hwmod omap44xx_mcasp_hwmod = { - .name = "mcasp", - .class = &omap44xx_mcasp_hwmod_class, - .clkdm_name = "abe_clkdm", - .main_clk = "func_mcasp_abe_gfclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM1_ABE_MCASP_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_ABE_MCASP_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'mcbsp' class - * multi channel buffered serial port controller - */ - -static struct omap_hwmod_class_sysconfig omap44xx_mcbsp_sysc = { - .rev_offs = -ENODEV, - .sysc_offs = 0x008c, - .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap44xx_mcbsp_hwmod_class = { - .name = "mcbsp", - .sysc = &omap44xx_mcbsp_sysc, -}; - -/* mcbsp1 */ -static struct omap_hwmod_opt_clk mcbsp1_opt_clks[] = { - { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_fck", .clk = "mcbsp1_sync_mux_ck" }, -}; - -static struct omap_hwmod omap44xx_mcbsp1_hwmod = { - .name = "mcbsp1", - .class = &omap44xx_mcbsp_hwmod_class, - .clkdm_name = "abe_clkdm", - .main_clk = "func_mcbsp1_gfclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM1_ABE_MCBSP1_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_ABE_MCBSP1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = mcbsp1_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(mcbsp1_opt_clks), -}; - -/* mcbsp2 */ -static struct omap_hwmod_opt_clk mcbsp2_opt_clks[] = { - { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_fck", .clk = "mcbsp2_sync_mux_ck" }, -}; - -static struct omap_hwmod omap44xx_mcbsp2_hwmod = { - .name = "mcbsp2", - .class = &omap44xx_mcbsp_hwmod_class, - .clkdm_name = "abe_clkdm", - .main_clk = "func_mcbsp2_gfclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM1_ABE_MCBSP2_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_ABE_MCBSP2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = mcbsp2_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(mcbsp2_opt_clks), -}; - -/* mcbsp3 */ -static struct omap_hwmod_opt_clk mcbsp3_opt_clks[] = { - { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_fck", .clk = "mcbsp3_sync_mux_ck" }, -}; - -static struct omap_hwmod omap44xx_mcbsp3_hwmod = { - .name = "mcbsp3", - .class = &omap44xx_mcbsp_hwmod_class, - .clkdm_name = "abe_clkdm", - .main_clk = "func_mcbsp3_gfclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM1_ABE_MCBSP3_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_ABE_MCBSP3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = mcbsp3_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(mcbsp3_opt_clks), -}; - -/* mcbsp4 */ -static struct omap_hwmod_opt_clk mcbsp4_opt_clks[] = { - { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_fck", .clk = "mcbsp4_sync_mux_ck" }, -}; - -static struct omap_hwmod omap44xx_mcbsp4_hwmod = { - .name = "mcbsp4", - .class = &omap44xx_mcbsp_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .main_clk = "per_mcbsp4_gfclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_MCBSP4_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_MCBSP4_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = mcbsp4_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(mcbsp4_opt_clks), -}; /* * 'mcpdm' class @@ -2295,51 +2087,6 @@ static struct omap_hwmod omap44xx_usb_host_hs_hwmod = { }; /* - * 'usb_otg_hs' class - * high-speed on-the-go universal serial bus (usb_otg_hs) controller - */ - -static struct omap_hwmod_class_sysconfig omap44xx_usb_otg_hs_sysc = { - .rev_offs = 0x0400, - .sysc_offs = 0x0404, - .syss_offs = 0x0408, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | - MSTANDBY_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap44xx_usb_otg_hs_hwmod_class = { - .name = "usb_otg_hs", - .sysc = &omap44xx_usb_otg_hs_sysc, -}; - -/* usb_otg_hs */ -static struct omap_hwmod_opt_clk usb_otg_hs_opt_clks[] = { - { .role = "xclk", .clk = "usb_otg_hs_xclk" }, -}; - -static struct omap_hwmod omap44xx_usb_otg_hs_hwmod = { - .name = "usb_otg_hs", - .class = &omap44xx_usb_otg_hs_hwmod_class, - .clkdm_name = "l3_init_clkdm", - .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, - .main_clk = "usb_otg_hs_ick", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L3INIT_USB_OTG_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L3INIT_USB_OTG_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = usb_otg_hs_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(usb_otg_hs_opt_clks), -}; - -/* * 'usb_tll_hs' class * usb_tll_hs module is the adapter on the usb_host_hs ports */ @@ -2546,14 +2293,6 @@ static struct omap_hwmod_ocp_if omap44xx_usb_host_hs__l3_main_2 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* usb_otg_hs -> l3_main_2 */ -static struct omap_hwmod_ocp_if omap44xx_usb_otg_hs__l3_main_2 = { - .master = &omap44xx_usb_otg_hs_hwmod, - .slave = &omap44xx_l3_main_2_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l3_main_1 -> l3_main_3 */ static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_3 = { .master = &omap44xx_l3_main_1_hwmod, @@ -2898,14 +2637,6 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__gpmc = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_per -> hdq1w */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__hdq1w = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_hdq1w_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_cfg -> hsi */ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__hsi = { .master = &omap44xx_l4_cfg_hwmod, @@ -2954,62 +2685,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_wkup__kbd = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_cfg -> mailbox */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__mailbox = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_mailbox_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_abe -> mcasp */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcasp = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_mcasp_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> mcasp (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcasp_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_mcasp_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_SDMA, -}; - -/* l4_abe -> mcbsp1 */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1 = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_mcbsp1_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_abe -> mcbsp2 */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2 = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_mcbsp2_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_abe -> mcbsp3 */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3 = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_mcbsp3_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> mcbsp4 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__mcbsp4 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_mcbsp4_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_abe -> mcpdm */ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm = { .master = &omap44xx_l4_abe_hwmod, @@ -3242,14 +2917,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_hs = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_cfg -> usb_otg_hs */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_otg_hs = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_usb_otg_hs_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_cfg -> usb_tll_hs */ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_tll_hs = { .master = &omap44xx_l4_cfg_hwmod, @@ -3296,7 +2963,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_cfg__l3_main_2, /* &omap44xx_usb_host_fs__l3_main_2, */ &omap44xx_usb_host_hs__l3_main_2, - &omap44xx_usb_otg_hs__l3_main_2, &omap44xx_l3_main_1__l3_main_3, &omap44xx_l3_main_2__l3_main_3, &omap44xx_l4_cfg__l3_main_3, @@ -3339,20 +3005,12 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_per__elm, &omap44xx_l4_cfg__fdif, &omap44xx_l3_main_2__gpmc, - &omap44xx_l4_per__hdq1w, &omap44xx_l4_cfg__hsi, &omap44xx_l3_main_2__ipu, &omap44xx_l3_main_2__iss, /* &omap44xx_iva__sl2if, */ &omap44xx_l3_main_2__iva, &omap44xx_l4_wkup__kbd, - &omap44xx_l4_cfg__mailbox, - &omap44xx_l4_abe__mcasp, - &omap44xx_l4_abe__mcasp_dma, - &omap44xx_l4_abe__mcbsp1, - &omap44xx_l4_abe__mcbsp2, - &omap44xx_l4_abe__mcbsp3, - &omap44xx_l4_per__mcbsp4, &omap44xx_l4_abe__mcpdm, &omap44xx_l3_main_2__mmu_ipu, &omap44xx_l4_cfg__mmu_dsp, @@ -3384,7 +3042,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_per__timer11, /* &omap44xx_l4_cfg__usb_host_fs, */ &omap44xx_l4_cfg__usb_host_hs, - &omap44xx_l4_cfg__usb_otg_hs, &omap44xx_l4_cfg__usb_tll_hs, &omap44xx_mpu__emif1, &omap44xx_mpu__emif2, diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index 8006b4383534..cc5ad6acab1d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -24,7 +24,6 @@ #include "cm1_54xx.h" #include "cm2_54xx.h" #include "prm54xx.h" -#include "wd_timer.h" /* Base offset for all OMAP5 interrupts external to MPUSS */ #define OMAP54XX_IRQ_GIC_START 32 @@ -629,124 +628,6 @@ static struct omap_hwmod omap54xx_kbd_hwmod = { }; /* - * 'mailbox' class - * mailbox module allowing communication between the on-chip processors using a - * queued mailbox-interrupt mechanism. - */ - -static struct omap_hwmod_class_sysconfig omap54xx_mailbox_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class omap54xx_mailbox_hwmod_class = { - .name = "mailbox", - .sysc = &omap54xx_mailbox_sysc, -}; - -/* mailbox */ -static struct omap_hwmod omap54xx_mailbox_hwmod = { - .name = "mailbox", - .class = &omap54xx_mailbox_hwmod_class, - .clkdm_name = "l4cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4CFG_MAILBOX_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4CFG_MAILBOX_CONTEXT_OFFSET, - }, - }, -}; - -/* - * 'mcbsp' class - * multi channel buffered serial port controller - */ - -static struct omap_hwmod_class_sysconfig omap54xx_mcbsp_sysc = { - .rev_offs = -ENODEV, - .sysc_offs = 0x008c, - .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap54xx_mcbsp_hwmod_class = { - .name = "mcbsp", - .sysc = &omap54xx_mcbsp_sysc, -}; - -/* mcbsp1 */ -static struct omap_hwmod_opt_clk mcbsp1_opt_clks[] = { - { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_fck", .clk = "mcbsp1_sync_mux_ck" }, -}; - -static struct omap_hwmod omap54xx_mcbsp1_hwmod = { - .name = "mcbsp1", - .class = &omap54xx_mcbsp_hwmod_class, - .clkdm_name = "abe_clkdm", - .main_clk = "mcbsp1_gfclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_ABE_MCBSP1_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_ABE_MCBSP1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = mcbsp1_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(mcbsp1_opt_clks), -}; - -/* mcbsp2 */ -static struct omap_hwmod_opt_clk mcbsp2_opt_clks[] = { - { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_fck", .clk = "mcbsp2_sync_mux_ck" }, -}; - -static struct omap_hwmod omap54xx_mcbsp2_hwmod = { - .name = "mcbsp2", - .class = &omap54xx_mcbsp_hwmod_class, - .clkdm_name = "abe_clkdm", - .main_clk = "mcbsp2_gfclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_ABE_MCBSP2_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_ABE_MCBSP2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = mcbsp2_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(mcbsp2_opt_clks), -}; - -/* mcbsp3 */ -static struct omap_hwmod_opt_clk mcbsp3_opt_clks[] = { - { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_fck", .clk = "mcbsp3_sync_mux_ck" }, -}; - -static struct omap_hwmod omap54xx_mcbsp3_hwmod = { - .name = "mcbsp3", - .class = &omap54xx_mcbsp_hwmod_class, - .clkdm_name = "abe_clkdm", - .main_clk = "mcbsp3_gfclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_ABE_MCBSP3_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_ABE_MCBSP3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = mcbsp3_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(mcbsp3_opt_clks), -}; - -/* * 'mcpdm' class * multi channel pdm controller (proprietary interface with phoenix power * ic) @@ -795,86 +676,6 @@ static struct omap_hwmod omap54xx_mcpdm_hwmod = { }, }; -/* - * 'mcspi' class - * multichannel serial port interface (mcspi) / master/slave synchronous serial - * bus - */ - -static struct omap_hwmod_class_sysconfig omap54xx_mcspi_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class omap54xx_mcspi_hwmod_class = { - .name = "mcspi", - .sysc = &omap54xx_mcspi_sysc, -}; - -/* mcspi1 */ -static struct omap_hwmod omap54xx_mcspi1_hwmod = { - .name = "mcspi1", - .class = &omap54xx_mcspi_hwmod_class, - .clkdm_name = "l4per_clkdm", - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_MCSPI1_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_MCSPI1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* mcspi2 */ -static struct omap_hwmod omap54xx_mcspi2_hwmod = { - .name = "mcspi2", - .class = &omap54xx_mcspi_hwmod_class, - .clkdm_name = "l4per_clkdm", - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_MCSPI2_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_MCSPI2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* mcspi3 */ -static struct omap_hwmod omap54xx_mcspi3_hwmod = { - .name = "mcspi3", - .class = &omap54xx_mcspi_hwmod_class, - .clkdm_name = "l4per_clkdm", - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_MCSPI3_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_MCSPI3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* mcspi4 */ -static struct omap_hwmod omap54xx_mcspi4_hwmod = { - .name = "mcspi4", - .class = &omap54xx_mcspi_hwmod_class, - .clkdm_name = "l4per_clkdm", - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_MCSPI4_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_MCSPI4_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; /* * 'mmu' class @@ -1392,43 +1193,6 @@ static struct omap_hwmod omap54xx_usb_otg_ss_hwmod = { .opt_clks_cnt = ARRAY_SIZE(usb_otg_ss_opt_clks), }; -/* - * 'wd_timer' class - * 32-bit watchdog upward counter that generates a pulse on the reset pin on - * overflow condition - */ - -static struct omap_hwmod_class_sysconfig omap54xx_wd_timer_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap54xx_wd_timer_hwmod_class = { - .name = "wd_timer", - .sysc = &omap54xx_wd_timer_sysc, - .pre_shutdown = &omap2_wd_timer_disable, -}; - -/* wd_timer2 */ -static struct omap_hwmod omap54xx_wd_timer2_hwmod = { - .name = "wd_timer2", - .class = &omap54xx_wd_timer_hwmod_class, - .clkdm_name = "wkupaon_clkdm", - .main_clk = "sys_32k_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_WKUPAON_WD_TIMER2_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_WKUPAON_WD_TIMER2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; /* * 'ocp2scp' class @@ -1747,38 +1511,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_wkup__kbd = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_cfg -> mailbox */ -static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mailbox = { - .master = &omap54xx_l4_cfg_hwmod, - .slave = &omap54xx_mailbox_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_abe -> mcbsp1 */ -static struct omap_hwmod_ocp_if omap54xx_l4_abe__mcbsp1 = { - .master = &omap54xx_l4_abe_hwmod, - .slave = &omap54xx_mcbsp1_hwmod, - .clk = "abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> mcbsp2 */ -static struct omap_hwmod_ocp_if omap54xx_l4_abe__mcbsp2 = { - .master = &omap54xx_l4_abe_hwmod, - .slave = &omap54xx_mcbsp2_hwmod, - .clk = "abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> mcbsp3 */ -static struct omap_hwmod_ocp_if omap54xx_l4_abe__mcbsp3 = { - .master = &omap54xx_l4_abe_hwmod, - .slave = &omap54xx_mcbsp3_hwmod, - .clk = "abe_iclk", - .user = OCP_USER_MPU, -}; - /* l4_abe -> mcpdm */ static struct omap_hwmod_ocp_if omap54xx_l4_abe__mcpdm = { .master = &omap54xx_l4_abe_hwmod, @@ -1787,38 +1519,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_abe__mcpdm = { .user = OCP_USER_MPU, }; -/* l4_per -> mcspi1 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__mcspi1 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_mcspi1_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> mcspi2 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__mcspi2 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_mcspi2_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> mcspi3 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__mcspi3 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_mcspi3_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> mcspi4 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__mcspi4 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_mcspi4_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_cfg -> mpu */ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mpu = { .master = &omap54xx_l4_cfg_hwmod, @@ -1955,14 +1655,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_otg_ss = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_wkup -> wd_timer2 */ -static struct omap_hwmod_ocp_if omap54xx_l4_wkup__wd_timer2 = { - .master = &omap54xx_l4_wkup_hwmod, - .slave = &omap54xx_wd_timer2_hwmod, - .clk = "wkupaon_iclk_mux", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_l3_main_1__dmm, &omap54xx_l3_main_3__l3_instr, @@ -1994,15 +1686,7 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_mpu__emif2, &omap54xx_l3_main_2__mmu_ipu, &omap54xx_l4_wkup__kbd, - &omap54xx_l4_cfg__mailbox, - &omap54xx_l4_abe__mcbsp1, - &omap54xx_l4_abe__mcbsp2, - &omap54xx_l4_abe__mcbsp3, &omap54xx_l4_abe__mcpdm, - &omap54xx_l4_per__mcspi1, - &omap54xx_l4_per__mcspi2, - &omap54xx_l4_per__mcspi3, - &omap54xx_l4_per__mcspi4, &omap54xx_l4_cfg__mpu, &omap54xx_l4_cfg__spinlock, &omap54xx_l4_cfg__ocp2scp1, @@ -2020,7 +1704,6 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_l4_cfg__usb_host_hs, &omap54xx_l4_cfg__usb_tll_hs, &omap54xx_l4_cfg__usb_otg_ss, - &omap54xx_l4_wkup__wd_timer2, &omap54xx_l4_cfg__ocp2scp3, &omap54xx_l4_cfg__sata, NULL, diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index e5bd549d2a5e..f8715bd96687 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -24,7 +24,6 @@ #include "cm1_7xx.h" #include "cm2_7xx.h" #include "prm7xx.h" -#include "wd_timer.h" #include "soc.h" /* Base offset for all DRA7XX interrupts external to MPUSS */ @@ -683,7 +682,7 @@ static struct omap_hwmod_class dra7xx_sha0_hwmod_class = { .sysc = &dra7xx_sha0_sysc, }; -struct omap_hwmod dra7xx_sha0_hwmod = { +static struct omap_hwmod dra7xx_sha0_hwmod = { .name = "sham", .class = &dra7xx_sha0_hwmod_class, .clkdm_name = "l4sec_clkdm", @@ -772,229 +771,7 @@ static struct omap_hwmod dra7xx_gpmc_hwmod = { }, }; -/* - * 'hdq1w' class - * - */ - -static struct omap_hwmod_class_sysconfig dra7xx_hdq1w_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0014, - .syss_offs = 0x0018, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SOFTRESET | - SYSS_HAS_RESET_STATUS), - .sysc_fields = &omap_hwmod_sysc_type1, -}; -static struct omap_hwmod_class dra7xx_hdq1w_hwmod_class = { - .name = "hdq1w", - .sysc = &dra7xx_hdq1w_sysc, -}; - -/* hdq1w */ - -static struct omap_hwmod dra7xx_hdq1w_hwmod = { - .name = "hdq1w", - .class = &dra7xx_hdq1w_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_INIT_NO_RESET, - .main_clk = "func_12m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_HDQ1W_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_HDQ1W_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'mailbox' class - * - */ - -static struct omap_hwmod_class_sysconfig dra7xx_mailbox_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class dra7xx_mailbox_hwmod_class = { - .name = "mailbox", - .sysc = &dra7xx_mailbox_sysc, -}; - -/* mailbox1 */ -static struct omap_hwmod dra7xx_mailbox1_hwmod = { - .name = "mailbox1", - .class = &dra7xx_mailbox_hwmod_class, - .clkdm_name = "l4cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX1_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4CFG_MAILBOX1_CONTEXT_OFFSET, - }, - }, -}; - -/* mailbox2 */ -static struct omap_hwmod dra7xx_mailbox2_hwmod = { - .name = "mailbox2", - .class = &dra7xx_mailbox_hwmod_class, - .clkdm_name = "l4cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX2_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4CFG_MAILBOX2_CONTEXT_OFFSET, - }, - }, -}; - -/* mailbox3 */ -static struct omap_hwmod dra7xx_mailbox3_hwmod = { - .name = "mailbox3", - .class = &dra7xx_mailbox_hwmod_class, - .clkdm_name = "l4cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX3_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4CFG_MAILBOX3_CONTEXT_OFFSET, - }, - }, -}; - -/* mailbox4 */ -static struct omap_hwmod dra7xx_mailbox4_hwmod = { - .name = "mailbox4", - .class = &dra7xx_mailbox_hwmod_class, - .clkdm_name = "l4cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX4_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4CFG_MAILBOX4_CONTEXT_OFFSET, - }, - }, -}; - -/* mailbox5 */ -static struct omap_hwmod dra7xx_mailbox5_hwmod = { - .name = "mailbox5", - .class = &dra7xx_mailbox_hwmod_class, - .clkdm_name = "l4cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX5_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4CFG_MAILBOX5_CONTEXT_OFFSET, - }, - }, -}; - -/* mailbox6 */ -static struct omap_hwmod dra7xx_mailbox6_hwmod = { - .name = "mailbox6", - .class = &dra7xx_mailbox_hwmod_class, - .clkdm_name = "l4cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX6_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4CFG_MAILBOX6_CONTEXT_OFFSET, - }, - }, -}; - -/* mailbox7 */ -static struct omap_hwmod dra7xx_mailbox7_hwmod = { - .name = "mailbox7", - .class = &dra7xx_mailbox_hwmod_class, - .clkdm_name = "l4cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX7_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4CFG_MAILBOX7_CONTEXT_OFFSET, - }, - }, -}; - -/* mailbox8 */ -static struct omap_hwmod dra7xx_mailbox8_hwmod = { - .name = "mailbox8", - .class = &dra7xx_mailbox_hwmod_class, - .clkdm_name = "l4cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX8_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4CFG_MAILBOX8_CONTEXT_OFFSET, - }, - }, -}; - -/* mailbox9 */ -static struct omap_hwmod dra7xx_mailbox9_hwmod = { - .name = "mailbox9", - .class = &dra7xx_mailbox_hwmod_class, - .clkdm_name = "l4cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX9_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4CFG_MAILBOX9_CONTEXT_OFFSET, - }, - }, -}; - -/* mailbox10 */ -static struct omap_hwmod dra7xx_mailbox10_hwmod = { - .name = "mailbox10", - .class = &dra7xx_mailbox_hwmod_class, - .clkdm_name = "l4cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX10_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4CFG_MAILBOX10_CONTEXT_OFFSET, - }, - }, -}; - -/* mailbox11 */ -static struct omap_hwmod dra7xx_mailbox11_hwmod = { - .name = "mailbox11", - .class = &dra7xx_mailbox_hwmod_class, - .clkdm_name = "l4cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX11_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4CFG_MAILBOX11_CONTEXT_OFFSET, - }, - }, -}; - -/* mailbox12 */ -static struct omap_hwmod dra7xx_mailbox12_hwmod = { - .name = "mailbox12", - .class = &dra7xx_mailbox_hwmod_class, - .clkdm_name = "l4cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX12_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4CFG_MAILBOX12_CONTEXT_OFFSET, - }, - }, -}; - -/* mailbox13 */ -static struct omap_hwmod dra7xx_mailbox13_hwmod = { - .name = "mailbox13", - .class = &dra7xx_mailbox_hwmod_class, - .clkdm_name = "l4cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX13_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4CFG_MAILBOX13_CONTEXT_OFFSET, - }, - }, -}; /* * 'mpu' class @@ -1655,34 +1432,6 @@ static struct omap_hwmod dra7xx_des_hwmod = { }, }; -/* rng */ -static struct omap_hwmod_class_sysconfig dra7xx_rng_sysc = { - .rev_offs = 0x1fe0, - .sysc_offs = 0x1fe4, - .sysc_flags = SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE, - .idlemodes = SIDLE_FORCE | SIDLE_NO, - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class dra7xx_rng_hwmod_class = { - .name = "rng", - .sysc = &dra7xx_rng_sysc, -}; - -static struct omap_hwmod dra7xx_rng_hwmod = { - .name = "rng", - .class = &dra7xx_rng_hwmod_class, - .flags = HWMOD_SWSUP_SIDLE, - .clkdm_name = "l4sec_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4SEC_RNG_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4SEC_RNG_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - /* * 'usb_otg_ss' class * @@ -1815,43 +1564,6 @@ static struct omap_hwmod dra7xx_vcp2_hwmod = { }, }; -/* - * 'wd_timer' class - * - */ - -static struct omap_hwmod_class_sysconfig dra7xx_wd_timer_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class dra7xx_wd_timer_hwmod_class = { - .name = "wd_timer", - .sysc = &dra7xx_wd_timer_sysc, - .pre_shutdown = &omap2_wd_timer_disable, - .reset = &omap2_wd_timer_reset, -}; - -/* wd_timer2 */ -static struct omap_hwmod dra7xx_wd_timer2_hwmod = { - .name = "wd_timer2", - .class = &dra7xx_wd_timer_hwmod_class, - .clkdm_name = "wkupaon_clkdm", - .main_clk = "sys_32k_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_WKUPAON_WD_TIMER2_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_WKUPAON_WD_TIMER2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; /* @@ -2090,118 +1802,6 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__gpmc = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_per1 -> hdq1w */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__hdq1w = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_hdq1w_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> mailbox1 */ -static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mailbox1 = { - .master = &dra7xx_l4_cfg_hwmod, - .slave = &dra7xx_mailbox1_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per3 -> mailbox2 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox2 = { - .master = &dra7xx_l4_per3_hwmod, - .slave = &dra7xx_mailbox2_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per3 -> mailbox3 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox3 = { - .master = &dra7xx_l4_per3_hwmod, - .slave = &dra7xx_mailbox3_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per3 -> mailbox4 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox4 = { - .master = &dra7xx_l4_per3_hwmod, - .slave = &dra7xx_mailbox4_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per3 -> mailbox5 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox5 = { - .master = &dra7xx_l4_per3_hwmod, - .slave = &dra7xx_mailbox5_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per3 -> mailbox6 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox6 = { - .master = &dra7xx_l4_per3_hwmod, - .slave = &dra7xx_mailbox6_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per3 -> mailbox7 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox7 = { - .master = &dra7xx_l4_per3_hwmod, - .slave = &dra7xx_mailbox7_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per3 -> mailbox8 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox8 = { - .master = &dra7xx_l4_per3_hwmod, - .slave = &dra7xx_mailbox8_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per3 -> mailbox9 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox9 = { - .master = &dra7xx_l4_per3_hwmod, - .slave = &dra7xx_mailbox9_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per3 -> mailbox10 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox10 = { - .master = &dra7xx_l4_per3_hwmod, - .slave = &dra7xx_mailbox10_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per3 -> mailbox11 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox11 = { - .master = &dra7xx_l4_per3_hwmod, - .slave = &dra7xx_mailbox11_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per3 -> mailbox12 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox12 = { - .master = &dra7xx_l4_per3_hwmod, - .slave = &dra7xx_mailbox12_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per3 -> mailbox13 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox13 = { - .master = &dra7xx_l4_per3_hwmod, - .slave = &dra7xx_mailbox13_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_cfg -> mpu */ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mpu = { .master = &dra7xx_l4_cfg_hwmod, @@ -2442,13 +2042,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__des = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_per1 -> rng */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__rng = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_rng_hwmod, - .user = OCP_USER_MPU, -}; - /* l4_per3 -> usb_otg_ss1 */ static struct omap_hwmod_ocp_if dra7xx_l4_per3__usb_otg_ss1 = { .master = &dra7xx_l4_per3_hwmod, @@ -2513,14 +2106,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per2__vcp2 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_wkup -> wd_timer2 */ -static struct omap_hwmod_ocp_if dra7xx_l4_wkup__wd_timer2 = { - .master = &dra7xx_l4_wkup_hwmod, - .slave = &dra7xx_wd_timer2_hwmod, - .clk = "wkupaon_iclk_mux", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_per2 -> epwmss0 */ static struct omap_hwmod_ocp_if dra7xx_l4_per2__epwmss0 = { .master = &dra7xx_l4_per2_hwmod, @@ -2575,20 +2160,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l3_main_1__sha0, &dra7xx_l4_per1__elm, &dra7xx_l3_main_1__gpmc, - &dra7xx_l4_per1__hdq1w, - &dra7xx_l4_cfg__mailbox1, - &dra7xx_l4_per3__mailbox2, - &dra7xx_l4_per3__mailbox3, - &dra7xx_l4_per3__mailbox4, - &dra7xx_l4_per3__mailbox5, - &dra7xx_l4_per3__mailbox6, - &dra7xx_l4_per3__mailbox7, - &dra7xx_l4_per3__mailbox8, - &dra7xx_l4_per3__mailbox9, - &dra7xx_l4_per3__mailbox10, - &dra7xx_l4_per3__mailbox11, - &dra7xx_l4_per3__mailbox12, - &dra7xx_l4_per3__mailbox13, &dra7xx_l4_cfg__mpu, &dra7xx_l4_cfg__ocp2scp1, &dra7xx_l4_cfg__ocp2scp3, @@ -2624,7 +2195,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l4_per2__vcp1, &dra7xx_l3_main_1__vcp2, &dra7xx_l4_per2__vcp2, - &dra7xx_l4_wkup__wd_timer2, &dra7xx_l4_per2__epwmss0, &dra7xx_l4_per2__epwmss1, &dra7xx_l4_per2__epwmss2, @@ -2634,7 +2204,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { /* GP-only hwmod links */ static struct omap_hwmod_ocp_if *dra7xx_gp_hwmod_ocp_ifs[] __initdata = { &dra7xx_l4_wkup__timer12, - &dra7xx_l4_per1__rng, NULL, }; diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index 6787f1e72c6b..a642d3b39e50 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -36,11 +36,6 @@ #define OMAP4_VDD_CORE_SR_VOLT_REG 0x61 #define OMAP4_VDD_CORE_SR_CMD_REG 0x62 -#define OMAP4_VP_CONFIG_ERROROFFSET 0x00 -#define OMAP4_VP_VSTEPMIN_VSTEPMIN 0x01 -#define OMAP4_VP_VSTEPMAX_VSTEPMAX 0x04 -#define OMAP4_VP_VLIMITTO_TIMEOUT_US 200 - static bool is_offset_valid; static u8 smps_offset; @@ -219,7 +214,8 @@ int __init omap4_twl_init(void) { struct voltagedomain *voltdm; - if (!cpu_is_omap44xx()) + if (!cpu_is_omap44xx() || + of_find_compatible_node(NULL, NULL, "motorola,cpcap")) return -ENODEV; voltdm = voltdm_lookup("mpu"); diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c index adea43ea1c60..985aeab9bc2a 100644 --- a/arch/arm/mach-omap2/opp4xxx_data.c +++ b/arch/arm/mach-omap2/opp4xxx_data.c @@ -32,20 +32,22 @@ #define OMAP4430_VDD_MPU_OPP50_UV 1025000 #define OMAP4430_VDD_MPU_OPP100_UV 1200000 -#define OMAP4430_VDD_MPU_OPPTURBO_UV 1313000 -#define OMAP4430_VDD_MPU_OPPNITRO_UV 1375000 +#define OMAP4430_VDD_MPU_OPPTURBO_UV 1325000 +#define OMAP4430_VDD_MPU_OPPNITRO_UV 1388000 +#define OMAP4430_VDD_MPU_OPPNITROSB_UV 1398000 struct omap_volt_data omap443x_vdd_mpu_volt_data[] = { VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP50_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP50, 0xf4, 0x0c), VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP100_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP100, 0xf9, 0x16), VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO, 0xfa, 0x23), VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPNITRO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO, 0xfa, 0x27), + VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPNITROSB_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPNITROSB, 0xfa, 0x27), VOLT_DATA_DEFINE(0, 0, 0, 0), }; -#define OMAP4430_VDD_IVA_OPP50_UV 1013000 -#define OMAP4430_VDD_IVA_OPP100_UV 1188000 -#define OMAP4430_VDD_IVA_OPPTURBO_UV 1300000 +#define OMAP4430_VDD_IVA_OPP50_UV 950000 +#define OMAP4430_VDD_IVA_OPP100_UV 1114000 +#define OMAP4430_VDD_IVA_OPPTURBO_UV 1291000 struct omap_volt_data omap443x_vdd_iva_volt_data[] = { VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP50_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP50, 0xf4, 0x0c), @@ -54,8 +56,8 @@ struct omap_volt_data omap443x_vdd_iva_volt_data[] = { VOLT_DATA_DEFINE(0, 0, 0, 0), }; -#define OMAP4430_VDD_CORE_OPP50_UV 1025000 -#define OMAP4430_VDD_CORE_OPP100_UV 1200000 +#define OMAP4430_VDD_CORE_OPP50_UV 962000 +#define OMAP4430_VDD_CORE_OPP100_UV 1127000 struct omap_volt_data omap443x_vdd_core_volt_data[] = { VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP50_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP50, 0xf4, 0x0c), diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index de8c54034a5a..ca52271de5a8 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -7,11 +7,9 @@ #include <linux/clk.h> #include <linux/davinci_emac.h> #include <linux/gpio.h> -#include <linux/gpio/machine.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/of_platform.h> -#include <linux/ti_wilink_st.h> #include <linux/wl12xx.h> #include <linux/mmc/card.h> #include <linux/mmc/host.h> @@ -33,7 +31,6 @@ #include "omap_device.h" #include "omap-secure.h" #include "soc.h" -#include "hsmmc.h" static struct omap_hsmmc_platform_data __maybe_unused mmc_pdata[2]; @@ -146,53 +143,6 @@ static void __init omap3_sbc_t3530_legacy_init(void) omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub"); } -static struct ti_st_plat_data wilink_pdata = { - .nshutdown_gpio = 137, - .dev_name = "/dev/ttyO1", - .flow_cntrl = 1, - .baud_rate = 300000, -}; - -static struct platform_device wl18xx_device = { - .name = "kim", - .id = -1, - .dev = { - .platform_data = &wilink_pdata, - } -}; - -static struct ti_st_plat_data wilink7_pdata = { - .nshutdown_gpio = 162, - .dev_name = "/dev/ttyO1", - .flow_cntrl = 1, - .baud_rate = 3000000, -}; - -static struct platform_device wl128x_device = { - .name = "kim", - .id = -1, - .dev = { - .platform_data = &wilink7_pdata, - } -}; - -static struct platform_device btwilink_device = { - .name = "btwilink", - .id = -1, -}; - -static void __init omap3_igep0020_rev_f_legacy_init(void) -{ - platform_device_register(&wl18xx_device); - platform_device_register(&btwilink_device); -} - -static void __init omap3_igep0030_rev_g_legacy_init(void) -{ - platform_device_register(&wl18xx_device); - platform_device_register(&btwilink_device); -} - static void __init omap3_evm_legacy_init(void) { hsmmc2_internal_input_clk(); @@ -295,123 +245,18 @@ static void __init omap3_tao3530_legacy_init(void) static void __init omap3_logicpd_torpedo_init(void) { omap3_gpio126_127_129(); - platform_device_register(&wl128x_device); - platform_device_register(&btwilink_device); } /* omap3pandora legacy devices */ -#define PANDORA_WIFI_IRQ_GPIO 21 -#define PANDORA_WIFI_NRESET_GPIO 23 static struct platform_device pandora_backlight = { .name = "pandora-backlight", .id = -1, }; -static struct regulator_consumer_supply pandora_vmmc3_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"), -}; - -static struct regulator_init_data pandora_vmmc3 = { - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(pandora_vmmc3_supply), - .consumer_supplies = pandora_vmmc3_supply, -}; - -static struct fixed_voltage_config pandora_vwlan = { - .supply_name = "vwlan", - .microvolts = 1800000, /* 1.8V */ - .startup_delay = 50000, /* 50ms */ - .init_data = &pandora_vmmc3, -}; - -static struct platform_device pandora_vwlan_device = { - .name = "reg-fixed-voltage", - .id = 1, - .dev = { - .platform_data = &pandora_vwlan, - }, -}; - -static struct gpiod_lookup_table pandora_vwlan_gpiod_table = { - .dev_id = "reg-fixed-voltage.1", - .table = { - /* - * As this is a low GPIO number it should be at the first - * GPIO bank. - */ - GPIO_LOOKUP("gpio-0-31", PANDORA_WIFI_NRESET_GPIO, - NULL, GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static void pandora_wl1251_init_card(struct mmc_card *card) -{ - /* - * We have TI wl1251 attached to MMC3. Pass this information to - * SDIO core because it can't be probed by normal methods. - */ - if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) { - card->quirks |= MMC_QUIRK_NONSTD_SDIO; - card->cccr.wide_bus = 1; - card->cis.vendor = 0x104c; - card->cis.device = 0x9066; - card->cis.blksize = 512; - card->cis.max_dtr = 24000000; - card->ocr = 0x80; - } -} - -static struct omap2_hsmmc_info pandora_mmc3[] = { - { - .mmc = 3, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD, - .init_card = pandora_wl1251_init_card, - }, - {} /* Terminator */ -}; - -static void __init pandora_wl1251_init(void) -{ - struct wl1251_platform_data pandora_wl1251_pdata; - int ret; - - memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata)); - - pandora_wl1251_pdata.power_gpio = -1; - - ret = gpio_request_one(PANDORA_WIFI_IRQ_GPIO, GPIOF_IN, "wl1251 irq"); - if (ret < 0) - goto fail; - - pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO); - if (pandora_wl1251_pdata.irq < 0) - goto fail_irq; - - pandora_wl1251_pdata.use_eeprom = true; - ret = wl1251_set_platform_data(&pandora_wl1251_pdata); - if (ret < 0) - goto fail_irq; - - return; - -fail_irq: - gpio_free(PANDORA_WIFI_IRQ_GPIO); -fail: - pr_err("wl1251 board initialisation failed\n"); -} - static void __init omap3_pandora_legacy_init(void) { platform_device_register(&pandora_backlight); - gpiod_add_lookup_table(&pandora_vwlan_gpiod_table); - platform_device_register(&pandora_vwlan_device); - omap_hsmmc_init(pandora_mmc3); - omap_hsmmc_late_init(pandora_mmc3); - pandora_wl1251_init(); } #endif /* CONFIG_ARCH_OMAP3 */ @@ -680,8 +525,6 @@ static struct pdata_init pdata_quirks[] __initdata = { { "nokia,omap3-n900", nokia_n900_legacy_init, }, { "nokia,omap3-n9", hsmmc2_internal_input_clk, }, { "nokia,omap3-n950", hsmmc2_internal_input_clk, }, - { "isee,omap3-igep0020-rev-f", omap3_igep0020_rev_f_legacy_init, }, - { "isee,omap3-igep0030-rev-g", omap3_igep0030_rev_g_legacy_init, }, { "logicpd,dm3730-torpedo-devkit", omap3_logicpd_torpedo_init, }, { "ti,omap3-evm-37xx", omap3_evm_legacy_init, }, { "ti,am3517-evm", am3517_evm_legacy_init, }, diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 7ac9af56762d..01ec1ba4878b 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -148,6 +148,7 @@ int __init omap2_common_pm_late_init(void) /* Init the voltage layer */ omap3_twl_init(); omap4_twl_init(); + omap4_cpcap_init(); omap_voltage_late_init(); /* Smartreflex device init */ diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 8a55b69bca63..2a883a0c1fcd 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -107,6 +107,11 @@ extern u16 pm44xx_errata; #define IS_PM44XX_ERRATUM(id) 0 #endif +#define OMAP4_VP_CONFIG_ERROROFFSET 0x00 +#define OMAP4_VP_VSTEPMIN_VSTEPMIN 0x01 +#define OMAP4_VP_VSTEPMAX_VSTEPMAX 0x04 +#define OMAP4_VP_VLIMITTO_TIMEOUT_US 200 + #ifdef CONFIG_POWER_AVS_OMAP extern int omap_devinit_smartreflex(void); extern void omap_enable_smartreflex_on_init(void); @@ -134,6 +139,15 @@ static inline int omap4_twl_init(void) } #endif +#if IS_ENABLED(CONFIG_MFD_CPCAP) +extern int omap4_cpcap_init(void); +#else +static inline int omap4_cpcap_init(void) +{ + return -EINVAL; +} +#endif + #ifdef CONFIG_PM extern void omap_pm_setup_oscillator(u32 tstart, u32 tshut); extern void omap_pm_get_oscillator(u32 *tstart, u32 *tshut); diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index 485550af2506..5a7a949ae965 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -128,18 +128,9 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) return 0; } - /* - * Bootloader or kexec boot may have LOGICRETSTATE cleared - * for some domains. This is the case when kexec booting from - * Android kernels that support off mode for example. - * Make sure it's set at least for core and per, otherwise - * we currently will see lost GPIO interrupts for wlcore and - * smsc911x at least if per hits retention during idle. - */ if (!strncmp(pwrdm->name, "core", 4) || - !strncmp(pwrdm->name, "l4per", 5) || - !strncmp(pwrdm->name, "wkup", 4)) - pwrdm_set_logic_retst(pwrdm, PWRDM_POWER_RET); + !strncmp(pwrdm->name, "l4per", 5)) + pwrdm_set_logic_retst(pwrdm, PWRDM_POWER_OFF); pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC); if (!pwrst) diff --git a/arch/arm/mach-omap2/pmic-cpcap.c b/arch/arm/mach-omap2/pmic-cpcap.c new file mode 100644 index 000000000000..eab281a5fc9f --- /dev/null +++ b/arch/arm/mach-omap2/pmic-cpcap.c @@ -0,0 +1,271 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * pmic-cpcap.c - CPCAP-specific functions for the OPP code + * + * Adapted from Motorola Mapphone Android Linux kernel + * Copyright (C) 2011 Motorola, Inc. + */ + +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> + +#include "soc.h" +#include "pm.h" +#include "voltage.h" + +#include <linux/init.h> +#include "vc.h" + +/** + * omap_cpcap_vsel_to_vdc - convert CPCAP VSEL value to microvolts DC + * @vsel: CPCAP VSEL value to convert + * + * Returns the microvolts DC that the CPCAP PMIC should generate when + * programmed with @vsel. + */ +static unsigned long omap_cpcap_vsel_to_uv(unsigned char vsel) +{ + if (vsel > 0x44) + vsel = 0x44; + return (((vsel * 125) + 6000)) * 100; +} + +/** + * omap_cpcap_uv_to_vsel - convert microvolts DC to CPCAP VSEL value + * @uv: microvolts DC to convert + * + * Returns the VSEL value necessary for the CPCAP PMIC to + * generate an output voltage equal to or greater than @uv microvolts DC. + */ +static unsigned char omap_cpcap_uv_to_vsel(unsigned long uv) +{ + if (uv < 600000) + uv = 600000; + else if (uv > 1450000) + uv = 1450000; + return DIV_ROUND_UP(uv - 600000, 12500); +} + +static struct omap_voltdm_pmic omap_cpcap_core = { + .slew_rate = 4000, + .step_size = 12500, + .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, + .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, + .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, + .vddmin = 900000, + .vddmax = 1350000, + .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, + .i2c_slave_addr = 0x02, + .volt_reg_addr = 0x00, + .cmd_reg_addr = 0x01, + .i2c_high_speed = false, + .vsel_to_uv = omap_cpcap_vsel_to_uv, + .uv_to_vsel = omap_cpcap_uv_to_vsel, +}; + +static struct omap_voltdm_pmic omap_cpcap_iva = { + .slew_rate = 4000, + .step_size = 12500, + .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, + .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, + .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, + .vddmin = 900000, + .vddmax = 1350000, + .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, + .i2c_slave_addr = 0x44, + .volt_reg_addr = 0x0, + .cmd_reg_addr = 0x01, + .i2c_high_speed = false, + .vsel_to_uv = omap_cpcap_vsel_to_uv, + .uv_to_vsel = omap_cpcap_uv_to_vsel, +}; + +/** + * omap_max8952_vsel_to_vdc - convert MAX8952 VSEL value to microvolts DC + * @vsel: MAX8952 VSEL value to convert + * + * Returns the microvolts DC that the MAX8952 Regulator should generate when + * programmed with @vsel. + */ +static unsigned long omap_max8952_vsel_to_uv(unsigned char vsel) +{ + if (vsel > 0x3F) + vsel = 0x3F; + return (((vsel * 100) + 7700)) * 100; +} + +/** + * omap_max8952_uv_to_vsel - convert microvolts DC to MAX8952 VSEL value + * @uv: microvolts DC to convert + * + * Returns the VSEL value necessary for the MAX8952 Regulator to + * generate an output voltage equal to or greater than @uv microvolts DC. + */ +static unsigned char omap_max8952_uv_to_vsel(unsigned long uv) +{ + if (uv < 770000) + uv = 770000; + else if (uv > 1400000) + uv = 1400000; + return DIV_ROUND_UP(uv - 770000, 10000); +} + +static struct omap_voltdm_pmic omap443x_max8952_mpu = { + .slew_rate = 16000, + .step_size = 10000, + .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, + .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, + .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, + .vddmin = 900000, + .vddmax = 1400000, + .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, + .i2c_slave_addr = 0x60, + .volt_reg_addr = 0x03, + .cmd_reg_addr = 0x03, + .i2c_high_speed = false, + .vsel_to_uv = omap_max8952_vsel_to_uv, + .uv_to_vsel = omap_max8952_uv_to_vsel, +}; + +/** + * omap_fan5355_vsel_to_vdc - convert FAN535503 VSEL value to microvolts DC + * @vsel: FAN535503 VSEL value to convert + * + * Returns the microvolts DC that the FAN535503 Regulator should generate when + * programmed with @vsel. + */ +static unsigned long omap_fan535503_vsel_to_uv(unsigned char vsel) +{ + /* Extract bits[5:0] */ + vsel &= 0x3F; + + return (((vsel * 125) + 7500)) * 100; +} + +/** + * omap_fan535508_vsel_to_vdc - convert FAN535508 VSEL value to microvolts DC + * @vsel: FAN535508 VSEL value to convert + * + * Returns the microvolts DC that the FAN535508 Regulator should generate when + * programmed with @vsel. + */ +static unsigned long omap_fan535508_vsel_to_uv(unsigned char vsel) +{ + /* Extract bits[5:0] */ + vsel &= 0x3F; + + if (vsel > 0x37) + vsel = 0x37; + return (((vsel * 125) + 7500)) * 100; +} + + +/** + * omap_fan535503_uv_to_vsel - convert microvolts DC to FAN535503 VSEL value + * @uv: microvolts DC to convert + * + * Returns the VSEL value necessary for the MAX8952 Regulator to + * generate an output voltage equal to or greater than @uv microvolts DC. + */ +static unsigned char omap_fan535503_uv_to_vsel(unsigned long uv) +{ + unsigned char vsel; + if (uv < 750000) + uv = 750000; + else if (uv > 1537500) + uv = 1537500; + + vsel = DIV_ROUND_UP(uv - 750000, 12500); + return vsel | 0xC0; +} + +/** + * omap_fan535508_uv_to_vsel - convert microvolts DC to FAN535508 VSEL value + * @uv: microvolts DC to convert + * + * Returns the VSEL value necessary for the MAX8952 Regulator to + * generate an output voltage equal to or greater than @uv microvolts DC. + */ +static unsigned char omap_fan535508_uv_to_vsel(unsigned long uv) +{ + unsigned char vsel; + if (uv < 750000) + uv = 750000; + else if (uv > 1437500) + uv = 1437500; + + vsel = DIV_ROUND_UP(uv - 750000, 12500); + return vsel | 0xC0; +} + +/* fan5335-core */ +static struct omap_voltdm_pmic omap4_fan_core = { + .slew_rate = 4000, + .step_size = 12500, + .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, + .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, + .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, + .vddmin = 850000, + .vddmax = 1375000, + .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, + .i2c_slave_addr = 0x4A, + .i2c_high_speed = false, + .volt_reg_addr = 0x01, + .cmd_reg_addr = 0x01, + .vsel_to_uv = omap_fan535508_vsel_to_uv, + .uv_to_vsel = omap_fan535508_uv_to_vsel, +}; + +/* fan5335 iva */ +static struct omap_voltdm_pmic omap4_fan_iva = { + .slew_rate = 4000, + .step_size = 12500, + .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, + .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, + .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, + .vddmin = 850000, + .vddmax = 1375000, + .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, + .i2c_slave_addr = 0x48, + .volt_reg_addr = 0x01, + .cmd_reg_addr = 0x01, + .i2c_high_speed = false, + .vsel_to_uv = omap_fan535503_vsel_to_uv, + .uv_to_vsel = omap_fan535503_uv_to_vsel, +}; + +int __init omap4_cpcap_init(void) +{ + struct voltagedomain *voltdm; + + if (!of_find_compatible_node(NULL, NULL, "motorola,cpcap")) + return -ENODEV; + + voltdm = voltdm_lookup("mpu"); + omap_voltage_register_pmic(voltdm, &omap443x_max8952_mpu); + + if (of_machine_is_compatible("motorola,droid-bionic")) { + voltdm = voltdm_lookup("mpu"); + omap_voltage_register_pmic(voltdm, &omap_cpcap_core); + + voltdm = voltdm_lookup("mpu"); + omap_voltage_register_pmic(voltdm, &omap_cpcap_iva); + } else { + voltdm = voltdm_lookup("core"); + omap_voltage_register_pmic(voltdm, &omap4_fan_core); + + voltdm = voltdm_lookup("iva"); + omap_voltage_register_pmic(voltdm, &omap4_fan_iva); + } + + return 0; +} + +static int __init cpcap_late_init(void) +{ + omap4_vc_set_pmic_signaling(PWRDM_POWER_RET); + + return 0; +} +omap_late_initcall(cpcap_late_init); diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index 1d9346f2a4ae..25093c1e5b9a 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -745,7 +745,7 @@ struct pwrdm_ops omap4_pwrdm_operations = { static int omap44xx_prm_late_init(void); -void prm_save_context(void) +static void prm_save_context(void) { omap_prm_context.irq_enable = omap4_prm_read_inst_reg(AM43XX_PRM_OCP_SOCKET_INST, @@ -756,7 +756,7 @@ void prm_save_context(void) omap4_prcm_irq_setup.pm_ctrl); } -void prm_restore_context(void) +static void prm_restore_context(void) { omap4_prm_write_inst_reg(omap_prm_context.irq_enable, OMAP4430_PRM_OCP_SOCKET_INST, diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 07bea84c5d6e..0d0a731cb476 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -545,7 +545,7 @@ static void __init __omap_sync32k_timer_init(int clkev_nr, const char *clkev_src omap2_gp_clockevent_init(clkev_nr, clkev_src, clkev_prop); /* Enable the use of clocksource="gp_timer" kernel parameter */ - if (use_gptimer_clksrc || gptimer) + if (clksrc_nr && (use_gptimer_clksrc || gptimer)) omap2_gptimer_clocksource_init(clksrc_nr, clksrc_src, clksrc_prop); else @@ -586,7 +586,7 @@ void __init omap3_gptimer_timer_init(void) static void __init omap4_sync32k_timer_init(void) { __omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon", - 2, "sys_clkin_ck", NULL, false); + 0, NULL, NULL, false); } void __init omap4_local_timer_init(void) diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index d76b1e5eb8ba..86f1ac4c2412 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -26,6 +26,31 @@ #include "scrm44xx.h" #include "control.h" +#define OMAP4430_VDD_IVA_I2C_DISABLE BIT(14) +#define OMAP4430_VDD_MPU_I2C_DISABLE BIT(13) +#define OMAP4430_VDD_CORE_I2C_DISABLE BIT(12) +#define OMAP4430_VDD_IVA_PRESENCE BIT(9) +#define OMAP4430_VDD_MPU_PRESENCE BIT(8) +#define OMAP4430_AUTO_CTRL_VDD_IVA(x) ((x) << 4) +#define OMAP4430_AUTO_CTRL_VDD_MPU(x) ((x) << 2) +#define OMAP4430_AUTO_CTRL_VDD_CORE(x) ((x) << 0) +#define OMAP4430_AUTO_CTRL_VDD_RET 2 + +#define OMAP4430_VDD_I2C_DISABLE_MASK \ + (OMAP4430_VDD_IVA_I2C_DISABLE | \ + OMAP4430_VDD_MPU_I2C_DISABLE | \ + OMAP4430_VDD_CORE_I2C_DISABLE) + +#define OMAP4_VDD_DEFAULT_VAL \ + (OMAP4430_VDD_I2C_DISABLE_MASK | \ + OMAP4430_VDD_IVA_PRESENCE | OMAP4430_VDD_MPU_PRESENCE | \ + OMAP4430_AUTO_CTRL_VDD_IVA(OMAP4430_AUTO_CTRL_VDD_RET) | \ + OMAP4430_AUTO_CTRL_VDD_MPU(OMAP4430_AUTO_CTRL_VDD_RET) | \ + OMAP4430_AUTO_CTRL_VDD_CORE(OMAP4430_AUTO_CTRL_VDD_RET)) + +#define OMAP4_VDD_RET_VAL \ + (OMAP4_VDD_DEFAULT_VAL & ~OMAP4430_VDD_I2C_DISABLE_MASK) + /** * struct omap_vc_channel_cfg - describe the cfg_channel bitfield * @sa: bit for slave address @@ -280,6 +305,26 @@ void omap3_vc_set_pmic_signaling(int core_next_state) } } +void omap4_vc_set_pmic_signaling(int core_next_state) +{ + struct voltagedomain *vd = vc.vd; + u32 val; + + if (!vd) + return; + + switch (core_next_state) { + case PWRDM_POWER_RET: + val = OMAP4_VDD_RET_VAL; + break; + default: + val = OMAP4_VDD_DEFAULT_VAL; + break; + } + + vd->write(val, OMAP4_PRM_VOLTCTRL_OFFSET); +} + /* * Configure signal polarity for sys_clkreq and sys_off_mode pins * as the default values are wrong and can cause the system to hang @@ -542,9 +587,19 @@ static void omap4_set_timings(struct voltagedomain *voltdm, bool off_mode) writel_relaxed(val, OMAP4_SCRM_CLKSETUPTIME); } +static void __init omap4_vc_init_pmic_signaling(struct voltagedomain *voltdm) +{ + if (vc.vd) + return; + + vc.vd = voltdm; + voltdm->write(OMAP4_VDD_DEFAULT_VAL, OMAP4_PRM_VOLTCTRL_OFFSET); +} + /* OMAP4 specific voltage init functions */ static void __init omap4_vc_init_channel(struct voltagedomain *voltdm) { + omap4_vc_init_pmic_signaling(voltdm); omap4_set_timings(voltdm, true); omap4_set_timings(voltdm, false); } @@ -615,7 +670,7 @@ static void __init omap4_vc_i2c_timing_init(struct voltagedomain *voltdm) const struct i2c_init_data *i2c_data; if (!voltdm->pmic->i2c_high_speed) { - pr_warn("%s: only high speed supported!\n", __func__); + pr_info("%s: using bootloader low-speed timings\n", __func__); return; } diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h index 5bf088633b62..9e861dbc2c4c 100644 --- a/arch/arm/mach-omap2/vc.h +++ b/arch/arm/mach-omap2/vc.h @@ -117,7 +117,7 @@ extern struct omap_vc_param omap4_iva_vc_data; extern struct omap_vc_param omap4_core_vc_data; void omap3_vc_set_pmic_signaling(int core_next_state); - +void omap4_vc_set_pmic_signaling(int core_next_state); void omap_vc_init_channel(struct voltagedomain *voltdm); int omap_vc_pre_scale(struct voltagedomain *voltdm, diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c index 0474a4b1394d..151e26ec0696 100644 --- a/arch/arm/mach-pxa/icontrol.c +++ b/arch/arm/mach-pxa/icontrol.c @@ -89,7 +89,7 @@ static struct spi_board_info mcp251x_board_info[] = { .max_speed_hz = 6500000, .bus_num = 3, .chip_select = 1, - .platform_data = &mcp251x_info, + .properties = mcp251x_properties, .controller_data = &mcp251x_chip_info2, .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ2) }, @@ -98,7 +98,7 @@ static struct spi_board_info mcp251x_board_info[] = { .max_speed_hz = 6500000, .bus_num = 4, .chip_select = 0, - .platform_data = &mcp251x_info, + .properties = mcp251x_properties, .controller_data = &mcp251x_chip_info3, .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ3) }, @@ -107,7 +107,7 @@ static struct spi_board_info mcp251x_board_info[] = { .max_speed_hz = 6500000, .bus_num = 4, .chip_select = 1, - .platform_data = &mcp251x_info, + .properties = mcp251x_properties, .controller_data = &mcp251x_chip_info4, .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ4) } diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h index a499ed17931e..8bfaca3a8b64 100644 --- a/arch/arm/mach-pxa/include/mach/tosa.h +++ b/arch/arm/mach-pxa/include/mach/tosa.h @@ -73,18 +73,6 @@ #define TOSA_GPIO_BAT1_TH_ON (TOSA_TC6393XB_GPIO_BASE + 15) /* - * Timing Generator - */ -#define TG_PNLCTL 0x00 -#define TG_TPOSCTL 0x01 -#define TG_DUTYCTL 0x02 -#define TG_GPOSR 0x03 -#define TG_GPODR1 0x04 -#define TG_GPODR2 0x05 -#define TG_PINICTL 0x06 -#define TG_HPOSCTL 0x07 - -/* * PXA GPIOs */ #define TOSA_GPIO_POWERON (0) @@ -192,7 +180,4 @@ #define TOSA_KEY_MAIL KEY_MAIL #endif -struct spi_device; -extern int tosa_bl_enable(struct spi_device *spi, int enable); - #endif /* _ASM_ARCH_TOSA_H_ */ diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index f537ff1c3ba7..4e13893edeb9 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -813,6 +813,26 @@ static struct pxa2xx_spi_controller pxa_ssp_master_info = { .num_chipselect = 1, }; +static struct gpiod_lookup_table tosa_lcd_gpio_table = { + .dev_id = "spi2.0", + .table = { + GPIO_LOOKUP("tc6393xb", + TOSA_GPIO_TG_ON - TOSA_TC6393XB_GPIO_BASE, + "tg #pwr", GPIO_ACTIVE_HIGH), + { }, + }, +}; + +static struct gpiod_lookup_table tosa_lcd_bl_gpio_table = { + .dev_id = "i2c-tosa-bl", + .table = { + GPIO_LOOKUP("tc6393xb", + TOSA_GPIO_BL_C20MA - TOSA_TC6393XB_GPIO_BASE, + "backlight", GPIO_ACTIVE_HIGH), + { }, + }, +}; + static struct spi_board_info spi_board_info[] __initdata = { { .modalias = "tosa-lcd", @@ -923,6 +943,8 @@ static void __init tosa_init(void) platform_scoop_config = &tosa_pcmcia_config; pxa2xx_set_spi_info(2, &pxa_ssp_master_info); + gpiod_add_lookup_table(&tosa_lcd_gpio_table); + gpiod_add_lookup_table(&tosa_lcd_bl_gpio_table); spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); clk_add_alias("CLK_CK3P6MI", tc6393xb_device.name, "GPIO11_CLK", NULL); diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c index 1cdb7bd3e713..9514196cad8c 100644 --- a/arch/arm/mach-s3c24xx/s3c2416.c +++ b/arch/arm/mach-s3c24xx/s3c2416.c @@ -113,7 +113,7 @@ void __init s3c2416_map_io(void) /* initialize device information early */ s3c2416_default_sdhci0(); s3c2416_default_sdhci1(); - s3c64xx_spi_setname("s3c2443-spi"); + s3c24xx_spi_setname("s3c2443-spi"); iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc)); } diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c index 313e369c3ddd..4cbeb74cf3d6 100644 --- a/arch/arm/mach-s3c24xx/s3c2443.c +++ b/arch/arm/mach-s3c24xx/s3c2443.c @@ -91,7 +91,7 @@ void __init s3c2443_map_io(void) s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull; /* initialize device information early */ - s3c64xx_spi_setname("s3c2443-spi"); + s3c24xx_spi_setname("s3c2443-spi"); iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc)); } diff --git a/arch/arm/mach-s3c24xx/spi-core.h b/arch/arm/mach-s3c24xx/spi-core.h index bb555ccbe057..1048fac629a2 100644 --- a/arch/arm/mach-s3c24xx/spi-core.h +++ b/arch/arm/mach-s3c24xx/spi-core.h @@ -11,7 +11,7 @@ */ /* re-define device name depending on support. */ -static inline void s3c64xx_spi_setname(char *name) +static inline void s3c24xx_spi_setname(char *name) { #ifdef CONFIG_S3C64XX_DEV_SPI0 s3c64xx_device_spi0.name = name; diff --git a/arch/arm/mach-s3c64xx/setup-usb-phy.c b/arch/arm/mach-s3c64xx/setup-usb-phy.c index 6aaaa1d8e8b9..d6b0e3b268af 100644 --- a/arch/arm/mach-s3c64xx/setup-usb-phy.c +++ b/arch/arm/mach-s3c64xx/setup-usb-phy.c @@ -73,7 +73,7 @@ static int s3c_usb_otgphy_exit(struct platform_device *pdev) return 0; } -int s5p_usb_phy_init(struct platform_device *pdev, int type) +int s3c_usb_phy_init(struct platform_device *pdev, int type) { if (type == USB_PHY_TYPE_DEVICE) return s3c_usb_otgphy_init(pdev); @@ -81,7 +81,7 @@ int s5p_usb_phy_init(struct platform_device *pdev, int type) return -EINVAL; } -int s5p_usb_phy_exit(struct platform_device *pdev, int type) +int s3c_usb_phy_exit(struct platform_device *pdev, int type) { if (type == USB_PHY_TYPE_DEVICE) return s3c_usb_otgphy_exit(pdev); diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index 9e4bc1865f84..2fd3aa6f3212 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -24,7 +24,6 @@ #include "rcar-gen2.h" static const struct of_device_id cpg_matches[] __initconst = { - { .compatible = "renesas,rcar-gen2-cpg-clocks", }, { .compatible = "renesas,r8a7743-cpg-mssr", .data = "extal" }, { .compatible = "renesas,r8a7744-cpg-mssr", .data = "extal" }, { .compatible = "renesas,r8a7790-cpg-mssr", .data = "extal" }, diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c index 47ebcc8a5085..9e4cb2ffd580 100644 --- a/arch/arm/mach-socfpga/socfpga.c +++ b/arch/arm/mach-socfpga/socfpga.c @@ -73,10 +73,10 @@ static void socfpga_cyclone5_restart(enum reboot_mode mode, const char *cmd) temp = readl(rst_manager_base_addr + SOCFPGA_RSTMGR_CTRL); - if (mode == REBOOT_HARD) - temp |= RSTMGR_CTRL_SWCOLDRSTREQ; - else + if (mode == REBOOT_WARM) temp |= RSTMGR_CTRL_SWWARMRSTREQ; + else + temp |= RSTMGR_CTRL_SWCOLDRSTREQ; writel(temp, rst_manager_base_addr + SOCFPGA_RSTMGR_CTRL); } @@ -86,10 +86,10 @@ static void socfpga_arria10_restart(enum reboot_mode mode, const char *cmd) temp = readl(rst_manager_base_addr + SOCFPGA_A10_RSTMGR_CTRL); - if (mode == REBOOT_HARD) - temp |= RSTMGR_CTRL_SWCOLDRSTREQ; - else + if (mode == REBOOT_WARM) temp |= RSTMGR_CTRL_SWWARMRSTREQ; + else + temp |= RSTMGR_CTRL_SWCOLDRSTREQ; writel(temp, rst_manager_base_addr + SOCFPGA_A10_RSTMGR_CTRL); } diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c index 2447427cb4a8..69f3fa270fbe 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra20.c +++ b/arch/arm/mach-tegra/cpuidle-tegra20.c @@ -203,7 +203,7 @@ void tegra20_cpuidle_pcie_irqs_in_use(void) { pr_info_once( "Disabling cpuidle LP2 state, since PCIe IRQs are in use\n"); - tegra_idle_driver.states[1].disabled = true; + cpuidle_driver_state_disabled(&tegra_idle_driver, 1, true); } int __init tegra20_cpuidle_init(void) diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S index 67b763fea005..e3f34815c9da 100644 --- a/arch/arm/mach-tegra/reset-handler.S +++ b/arch/arm/mach-tegra/reset-handler.S @@ -44,16 +44,16 @@ ENTRY(tegra_resume) cmp r6, #TEGRA20 beq 1f @ Yes /* Clear the flow controller flags for this CPU. */ - cpu_to_csr_reg r1, r0 + cpu_to_csr_reg r3, r0 mov32 r2, TEGRA_FLOW_CTRL_BASE - ldr r1, [r2, r1] + ldr r1, [r2, r3] /* Clear event & intr flag */ orr r1, r1, \ #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG movw r0, #0x3FFD @ enable, cluster_switch, immed, bitmaps @ & ext flags for CPU power mgnt bic r1, r1, r0 - str r1, [r2] + str r1, [r2, r3] 1: mov32 r9, 0xc09 diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S index b408fa56eb89..3341a12bbb9c 100644 --- a/arch/arm/mach-tegra/sleep-tegra30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -682,10 +682,12 @@ tegra30_enter_sleep: dsb ldr r0, [r6, r2] /* memory barrier */ + cmp r10, #TEGRA30 halted: isb dsb - wfi /* CPU should be power gated here */ + wfine /* CPU should be power gated here */ + wfeeq /* !!!FIXME!!! Implement halt failure handler */ b halted diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 3875027ef8fc..e929aaa744c0 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -84,6 +84,7 @@ static void __init ux500_init_irq(void) struct resource r; irqchip_init(); + prcmu_early_init(); np = of_find_compatible_node(NULL, NULL, "stericsson,db8500-prcmu"); of_address_to_resource(np, 0, &r); of_node_put(np); @@ -91,7 +92,6 @@ static void __init ux500_init_irq(void) pr_err("could not find PRCMU base resource\n"); return; } - prcmu_early_init(r.start, r.end-r.start); ux500_pm_init(r.start, r.end-r.start); /* Unlock before init */ diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 0ab3a86b1f52..65e4482e3849 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -896,7 +896,10 @@ config VDSO bool "Enable VDSO for acceleration of some system calls" depends on AEABI && MMU && CPU_V7 default y if ARM_ARCH_TIMER + select HAVE_GENERIC_VDSO select GENERIC_TIME_VSYSCALL + select GENERIC_VDSO_32 + select GENERIC_GETTIMEOFDAY help Place in the process address space an ELF shared object providing fast implementations of gettimeofday and @@ -1041,7 +1044,7 @@ endif config CACHE_TAUROS2 bool "Enable the Tauros2 L2 cache controller" - depends on (ARCH_DOVE || ARCH_MMP || CPU_PJ4) + depends on (CPU_MOHAWK || CPU_PJ4) default y select OUTER_CACHE help diff --git a/arch/arm/mm/dma-mapping-nommu.c b/arch/arm/mm/dma-mapping-nommu.c index db9247898300..287ef898a55e 100644 --- a/arch/arm/mm/dma-mapping-nommu.c +++ b/arch/arm/mm/dma-mapping-nommu.c @@ -35,7 +35,7 @@ static void *arm_nommu_dma_alloc(struct device *dev, size_t size, unsigned long attrs) { - void *ret = dma_alloc_from_global_coherent(size, dma_handle); + void *ret = dma_alloc_from_global_coherent(dev, size, dma_handle); /* * dma_alloc_from_global_coherent() may fail because: diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 7d042d5c43e3..e822af0d9219 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -529,7 +529,7 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page) static bool __in_atomic_pool(void *start, size_t size) { - return addr_in_gen_pool(atomic_pool, (unsigned long)start, size); + return gen_pool_has_addr(atomic_pool, (unsigned long)start, size); } static int __free_from_pool(void *start, size_t size) @@ -1559,7 +1559,7 @@ static int arm_coherent_iommu_mmap_attrs(struct device *dev, * free a page as defined by the above mapping. * Must not be called with IRQs disabled. */ -void __arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr, +static void __arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle, unsigned long attrs, int coherent_flag) { struct page **pages; @@ -1583,13 +1583,14 @@ void __arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr, __iommu_free_buffer(dev, pages, size, attrs); } -void arm_iommu_free_attrs(struct device *dev, size_t size, - void *cpu_addr, dma_addr_t handle, unsigned long attrs) +static void arm_iommu_free_attrs(struct device *dev, size_t size, + void *cpu_addr, dma_addr_t handle, + unsigned long attrs) { __arm_iommu_free_attrs(dev, size, cpu_addr, handle, attrs, NORMAL); } -void arm_coherent_iommu_free_attrs(struct device *dev, size_t size, +static void arm_coherent_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle, unsigned long attrs) { __arm_iommu_free_attrs(dev, size, cpu_addr, handle, attrs, COHERENT); @@ -1713,7 +1714,7 @@ bad_mapping: * possible) and tagged with the appropriate dma address and length. They are * obtained via sg_dma_{address,length}. */ -int arm_coherent_iommu_map_sg(struct device *dev, struct scatterlist *sg, +static int arm_coherent_iommu_map_sg(struct device *dev, struct scatterlist *sg, int nents, enum dma_data_direction dir, unsigned long attrs) { return __iommu_map_sg(dev, sg, nents, dir, attrs, true); @@ -1731,7 +1732,7 @@ int arm_coherent_iommu_map_sg(struct device *dev, struct scatterlist *sg, * tagged with the appropriate dma address and length. They are obtained via * sg_dma_{address,length}. */ -int arm_iommu_map_sg(struct device *dev, struct scatterlist *sg, +static int arm_iommu_map_sg(struct device *dev, struct scatterlist *sg, int nents, enum dma_data_direction dir, unsigned long attrs) { return __iommu_map_sg(dev, sg, nents, dir, attrs, false); @@ -1764,8 +1765,8 @@ static void __iommu_unmap_sg(struct device *dev, struct scatterlist *sg, * Unmap a set of streaming mode DMA translations. Again, CPU access * rules concerning calls here are the same as for dma_unmap_single(). */ -void arm_coherent_iommu_unmap_sg(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction dir, +static void arm_coherent_iommu_unmap_sg(struct device *dev, + struct scatterlist *sg, int nents, enum dma_data_direction dir, unsigned long attrs) { __iommu_unmap_sg(dev, sg, nents, dir, attrs, true); @@ -1781,9 +1782,10 @@ void arm_coherent_iommu_unmap_sg(struct device *dev, struct scatterlist *sg, * Unmap a set of streaming mode DMA translations. Again, CPU access * rules concerning calls here are the same as for dma_unmap_single(). */ -void arm_iommu_unmap_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction dir, - unsigned long attrs) +static void arm_iommu_unmap_sg(struct device *dev, + struct scatterlist *sg, int nents, + enum dma_data_direction dir, + unsigned long attrs) { __iommu_unmap_sg(dev, sg, nents, dir, attrs, false); } @@ -1795,7 +1797,8 @@ void arm_iommu_unmap_sg(struct device *dev, struct scatterlist *sg, int nents, * @nents: number of buffers to map (returned from dma_map_sg) * @dir: DMA transfer direction (same as was passed to dma_map_sg) */ -void arm_iommu_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, +static void arm_iommu_sync_sg_for_cpu(struct device *dev, + struct scatterlist *sg, int nents, enum dma_data_direction dir) { struct scatterlist *s; @@ -1813,7 +1816,8 @@ void arm_iommu_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, * @nents: number of buffers to map (returned from dma_map_sg) * @dir: DMA transfer direction (same as was passed to dma_map_sg) */ -void arm_iommu_sync_sg_for_device(struct device *dev, struct scatterlist *sg, +static void arm_iommu_sync_sg_for_device(struct device *dev, + struct scatterlist *sg, int nents, enum dma_data_direction dir) { struct scatterlist *s; @@ -2015,7 +2019,7 @@ static void arm_iommu_sync_single_for_device(struct device *dev, __dma_page_cpu_to_dev(page, offset, size, dir); } -const struct dma_map_ops iommu_ops = { +static const struct dma_map_ops iommu_ops = { .alloc = arm_iommu_alloc_attrs, .free = arm_iommu_free_attrs, .mmap = arm_iommu_mmap_attrs, @@ -2037,7 +2041,7 @@ const struct dma_map_ops iommu_ops = { .dma_supported = arm_dma_supported, }; -const struct dma_map_ops iommu_coherent_ops = { +static const struct dma_map_ops iommu_coherent_ops = { .alloc = arm_coherent_iommu_alloc_attrs, .free = arm_coherent_iommu_free_attrs, .mmap = arm_coherent_iommu_mmap_attrs, @@ -2332,26 +2336,20 @@ void arch_teardown_dma_ops(struct device *dev) } #ifdef CONFIG_SWIOTLB -void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_device(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { __dma_page_cpu_to_dev(phys_to_page(paddr), paddr & (PAGE_SIZE - 1), size, dir); } -void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { __dma_page_dev_to_cpu(phys_to_page(paddr), paddr & (PAGE_SIZE - 1), size, dir); } -long arch_dma_coherent_to_pfn(struct device *dev, void *cpu_addr, - dma_addr_t dma_addr) -{ - return dma_to_pfn(dev, dma_addr); -} - void *arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs) { diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index b4be3baa83d4..3ef204137e73 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -30,6 +30,7 @@ #include <asm/prom.h> #include <asm/sections.h> #include <asm/setup.h> +#include <asm/set_memory.h> #include <asm/system_info.h> #include <asm/tlb.h> #include <asm/fixmap.h> @@ -180,7 +181,7 @@ int pfn_valid(unsigned long pfn) if (__phys_to_pfn(addr) != pfn) return 0; - return memblock_is_map_memory(__pfn_to_phys(pfn)); + return memblock_is_map_memory(addr); } EXPORT_SYMBOL(pfn_valid); #endif @@ -593,8 +594,8 @@ static inline bool arch_has_strict_perms(void) return !!(get_cr() & CR_XP); } -void set_section_perms(struct section_perm *perms, int n, bool set, - struct mm_struct *mm) +static void set_section_perms(struct section_perm *perms, int n, bool set, + struct mm_struct *mm) { size_t i; unsigned long addr; diff --git a/arch/arm/mm/iomap.c b/arch/arm/mm/iomap.c index 091ddc56827e..415d0a454237 100644 --- a/arch/arm/mm/iomap.c +++ b/arch/arm/mm/iomap.c @@ -10,6 +10,8 @@ #include <linux/ioport.h> #include <linux/io.h> +#include <asm/vga.h> + unsigned long vga_base; EXPORT_SYMBOL(vga_base); diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index d42b93316183..72286f9a4d30 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -382,15 +382,11 @@ void __iomem *ioremap(resource_size_t res_cookie, size_t size) EXPORT_SYMBOL(ioremap); void __iomem *ioremap_cache(resource_size_t res_cookie, size_t size) - __alias(ioremap_cached); - -void __iomem *ioremap_cached(resource_size_t res_cookie, size_t size) { return arch_ioremap_caller(res_cookie, size, MT_DEVICE_CACHED, __builtin_return_address(0)); } EXPORT_SYMBOL(ioremap_cache); -EXPORT_SYMBOL(ioremap_cached); void __iomem *ioremap_wc(resource_size_t res_cookie, size_t size) { diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 48c2888297dd..5d0d0f86e790 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -259,7 +259,7 @@ static struct mem_type mem_types[] __ro_after_init = { .prot_sect = PROT_SECT_DEVICE, .domain = DOMAIN_IO, }, - [MT_DEVICE_CACHED] = { /* ioremap_cached */ + [MT_DEVICE_CACHED] = { /* ioremap_cache */ .prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_CACHED, .prot_l1 = PMD_TYPE_TABLE, .prot_sect = PROT_SECT_DEVICE | PMD_SECT_WB, diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index 24ecf8d30a1e..8b3d7191e2b8 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -206,15 +206,11 @@ void __iomem *ioremap(resource_size_t res_cookie, size_t size) EXPORT_SYMBOL(ioremap); void __iomem *ioremap_cache(resource_size_t res_cookie, size_t size) - __alias(ioremap_cached); - -void __iomem *ioremap_cached(resource_size_t res_cookie, size_t size) { return __arm_ioremap_caller(res_cookie, size, MT_DEVICE_CACHED, __builtin_return_address(0)); } EXPORT_SYMBOL(ioremap_cache); -EXPORT_SYMBOL(ioremap_cached); void __iomem *ioremap_wc(resource_size_t res_cookie, size_t size) { diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 4fa5371bc662..2785da387c91 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -491,7 +491,7 @@ cpu_arm1020_name: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm1020_proc_info,#object __arm1020_proc_info: diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 5d8a8339e09a..e9ea237ed785 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -449,7 +449,7 @@ arm1020e_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm1020e_proc_info,#object __arm1020e_proc_info: diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index b3dd95c345e4..920c279e7879 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -443,7 +443,7 @@ arm1022_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm1022_proc_info,#object __arm1022_proc_info: diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index ac5afde12f35..0bdf25a95b10 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -138,7 +138,7 @@ ENTRY(arm1026_flush_kern_cache_all) mov ip, #0 __flush_whole_cache: #ifndef CONFIG_CPU_DCACHE_DISABLE -1: mrc p15, 0, r15, c7, c14, 3 @ test, clean, invalidate +1: mrc p15, 0, APSR_nzcv, c7, c14, 3 @ test, clean, invalidate bne 1b #endif tst r2, #VM_EXEC @@ -363,7 +363,7 @@ ENTRY(cpu_arm1026_switch_mm) #ifdef CONFIG_MMU mov r1, #0 #ifndef CONFIG_CPU_DCACHE_DISABLE -1: mrc p15, 0, r15, c7, c14, 3 @ test, clean, invalidate +1: mrc p15, 0, APSR_nzcv, c7, c14, 3 @ test, clean, invalidate bne 1b #endif #ifndef CONFIG_CPU_ICACHE_DISABLE @@ -437,7 +437,7 @@ arm1026_crval: string cpu_arm1026_name, "ARM1026EJ-S" .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm1026_proc_info,#object __arm1026_proc_info: diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index c99d24363f32..39361e196d61 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -172,7 +172,7 @@ arm720_crval: * See <asm/procinfo.h> for a definition of this structure. */ - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro arm720_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cpu_flush:req .type __\name\()_proc_info,#object diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S index 1b4a3838393f..1a94bbf6e53f 100644 --- a/arch/arm/mm/proc-arm740.S +++ b/arch/arm/mm/proc-arm740.S @@ -128,7 +128,7 @@ __arm740_setup: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm740_proc_info,#object __arm740_proc_info: .long 0x41807400 diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S index 17a4687065c7..52b66cf0259e 100644 --- a/arch/arm/mm/proc-arm7tdmi.S +++ b/arch/arm/mm/proc-arm7tdmi.S @@ -72,7 +72,7 @@ __arm7tdmi_setup: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro arm7tdmi_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, \ extra_hwcaps=0 diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 298c76b47749..31ac8acc34dc 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -434,7 +434,7 @@ arm920_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm920_proc_info,#object __arm920_proc_info: diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index 824be3a0bc23..ca2c7ca8af21 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -412,7 +412,7 @@ arm922_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm922_proc_info,#object __arm922_proc_info: diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index d40cff8f102c..a381a0c9f109 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -477,7 +477,7 @@ arm925_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro arm925_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache .type __\name\()_proc_info,#object diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index f3cd08f353f0..1ba253c2bce1 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -131,7 +131,7 @@ __flush_whole_cache: #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache #else -1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate +1: mrc p15, 0, APSR_nzcv, c7, c14, 3 @ test,clean,invalidate bne 1b #endif tst r2, #VM_EXEC @@ -358,7 +358,7 @@ ENTRY(cpu_arm926_switch_mm) mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache #else @ && 'Clean & Invalidate whole DCache' -1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate +1: mrc p15, 0, APSR_nzcv, c7, c14, 3 @ test,clean,invalidate bne 1b #endif mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache @@ -460,7 +460,7 @@ arm926_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm926_proc_info,#object __arm926_proc_info: diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S index 1c26d991386d..4b8a00220cc9 100644 --- a/arch/arm/mm/proc-arm940.S +++ b/arch/arm/mm/proc-arm940.S @@ -340,7 +340,7 @@ __arm940_setup: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm940_proc_info,#object __arm940_proc_info: diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S index 2dc1c75a4fd4..555becf9c758 100644 --- a/arch/arm/mm/proc-arm946.S +++ b/arch/arm/mm/proc-arm946.S @@ -395,7 +395,7 @@ __arm946_setup: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm946_proc_info,#object __arm946_proc_info: .long 0x41009460 diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S index 913c06e590af..ef517530130b 100644 --- a/arch/arm/mm/proc-arm9tdmi.S +++ b/arch/arm/mm/proc-arm9tdmi.S @@ -66,7 +66,7 @@ __arm9tdmi_setup: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro arm9tdmi_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req .type __\name\()_proc_info, #object diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S index 8120b6f4dbb8..dddf833fe000 100644 --- a/arch/arm/mm/proc-fa526.S +++ b/arch/arm/mm/proc-fa526.S @@ -185,7 +185,7 @@ fa526_cr1_set: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __fa526_proc_info,#object __fa526_proc_info: diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S index bb6dc34d42a3..b12b76bc8d30 100644 --- a/arch/arm/mm/proc-feroceon.S +++ b/arch/arm/mm/proc-feroceon.S @@ -571,7 +571,7 @@ feroceon_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro feroceon_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache:req .type __\name\()_proc_info,#object diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S index f08308578885..d47d6c5cee63 100644 --- a/arch/arm/mm/proc-mohawk.S +++ b/arch/arm/mm/proc-mohawk.S @@ -416,7 +416,7 @@ mohawk_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __88sv331x_proc_info,#object __88sv331x_proc_info: diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S index d5bc5d702563..baba503ba816 100644 --- a/arch/arm/mm/proc-sa110.S +++ b/arch/arm/mm/proc-sa110.S @@ -196,7 +196,7 @@ sa110_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __sa110_proc_info,#object __sa110_proc_info: diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index be7b611c76c7..75ebacc8e4e5 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -239,7 +239,7 @@ sa1100_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro sa1100_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req .type __\name\()_proc_info,#object diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index c1c85eb3484f..1dd0d5ca27da 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -261,7 +261,7 @@ v6_crval: string cpu_elf_name, "v6" .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" /* * Match any ARMv6 processor core. diff --git a/arch/arm/mm/proc-v7-bugs.c b/arch/arm/mm/proc-v7-bugs.c index 7c90b4c615a5..c0fbfca5da8b 100644 --- a/arch/arm/mm/proc-v7-bugs.c +++ b/arch/arm/mm/proc-v7-bugs.c @@ -64,6 +64,9 @@ static void cpu_v7_spectre_init(void) break; #ifdef CONFIG_ARM_PSCI + case ARM_CPU_PART_BRAHMA_B53: + /* Requires no workaround */ + break; default: /* Other ARM CPUs require no workaround */ if (read_cpuid_implementor() == ARM_CPU_IMP_ARM) diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index c4e8006a1a8c..48e0ef6f0dcc 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -644,7 +644,7 @@ __v7_setup_stack: string cpu_elf_name, "v7" .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" /* * Standard v7 proc info content diff --git a/arch/arm/mm/proc-v7m.S b/arch/arm/mm/proc-v7m.S index 1a49d503eafc..84459c1d31b8 100644 --- a/arch/arm/mm/proc-v7m.S +++ b/arch/arm/mm/proc-v7m.S @@ -93,7 +93,7 @@ ENTRY(cpu_cm7_proc_fin) ret lr ENDPROC(cpu_cm7_proc_fin) - .section ".init.text", #alloc, #execinstr + .section ".init.text", "ax" __v7m_cm7_setup: mov r8, #(V7M_SCB_CCR_DC | V7M_SCB_CCR_IC| V7M_SCB_CCR_BP) @@ -177,7 +177,7 @@ ENDPROC(__v7m_setup) string cpu_elf_name "v7m" string cpu_v7m_name "ARMv7-M" - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro __v7m_proc name, initfunc, cache_fns = nop_cache_fns, hwcaps = 0, proc_fns = v7m_processor_functions .long 0 /* proc_info_list.__cpu_mm_mmu_flags */ diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index 1ac0fbbe9f12..42eaecc43cfe 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -496,7 +496,7 @@ xsc3_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro xsc3_proc_info name:req, cpu_val:req, cpu_mask:req .type __\name\()_proc_info,#object diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index bdb2b7749b03..18ac5a1f8922 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -610,7 +610,7 @@ xscale_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro xscale_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache .type __\name\()_proc_info,#object diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 1d1fa068d228..1602f6dc900b 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -1010,9 +1010,9 @@ void __init dwc2_hsotg_set_platdata(struct dwc2_hsotg_plat *pd) npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_usb_hsotg); if (!npd->phy_init) - npd->phy_init = s5p_usb_phy_init; + npd->phy_init = s3c_usb_phy_init; if (!npd->phy_exit) - npd->phy_exit = s5p_usb_phy_exit; + npd->phy_exit = s3c_usb_phy_exit; } #endif /* CONFIG_S3C_DEV_USB_HSOTG */ diff --git a/arch/arm/plat-samsung/include/plat/usb-phy.h b/arch/arm/plat-samsung/include/plat/usb-phy.h index 94da89ecbd3b..759d66a0773a 100644 --- a/arch/arm/plat-samsung/include/plat/usb-phy.h +++ b/arch/arm/plat-samsung/include/plat/usb-phy.h @@ -7,7 +7,7 @@ #ifndef __PLAT_SAMSUNG_USB_PHY_H #define __PLAT_SAMSUNG_USB_PHY_H __FILE__ -extern int s5p_usb_phy_init(struct platform_device *pdev, int type); -extern int s5p_usb_phy_exit(struct platform_device *pdev, int type); +extern int s3c_usb_phy_init(struct platform_device *pdev, int type); +extern int s3c_usb_phy_exit(struct platform_device *pdev, int type); #endif /* __PLAT_SAMSUNG_USB_PHY_H */ diff --git a/arch/arm/vdso/Makefile b/arch/arm/vdso/Makefile index 87b7769214e0..0fda344beb0b 100644 --- a/arch/arm/vdso/Makefile +++ b/arch/arm/vdso/Makefile @@ -1,7 +1,13 @@ # SPDX-License-Identifier: GPL-2.0 + +# Absolute relocation type $(ARCH_REL_TYPE_ABS) needs to be defined before +# the inclusion of generic Makefile. +ARCH_REL_TYPE_ABS := R_ARM_JUMP_SLOT|R_ARM_GLOB_DAT|R_ARM_ABS32 +include $(srctree)/lib/vdso/Makefile + hostprogs-y := vdsomunge -obj-vdso := vgettimeofday.o datapage.o +obj-vdso := vgettimeofday.o datapage.o note.o # Build rules targets := $(obj-vdso) vdso.so vdso.so.dbg vdso.so.raw vdso.lds @@ -24,7 +30,11 @@ CFLAGS_REMOVE_vdso.o = -pg # Force -O2 to avoid libgcc dependencies CFLAGS_REMOVE_vgettimeofday.o = -pg -Os +ifeq ($(c-gettimeofday-y),) CFLAGS_vgettimeofday.o = -O2 +else +CFLAGS_vgettimeofday.o = -O2 -include $(c-gettimeofday-y) +endif # Disable gcov profiling for VDSO code GCOV_PROFILE := n @@ -37,7 +47,7 @@ $(obj)/vdso.o : $(obj)/vdso.so # Link rule for the .so file $(obj)/vdso.so.raw: $(obj)/vdso.lds $(obj-vdso) FORCE - $(call if_changed,ld) + $(call if_changed,vdsold_and_vdso_check) $(obj)/vdso.so.dbg: $(obj)/vdso.so.raw $(obj)/vdsomunge FORCE $(call if_changed,vdsomunge) @@ -47,6 +57,10 @@ $(obj)/%.so: OBJCOPYFLAGS := -S $(obj)/%.so: $(obj)/%.so.dbg FORCE $(call if_changed,objcopy) +# Actual build commands +quiet_cmd_vdsold_and_vdso_check = LD $@ + cmd_vdsold_and_vdso_check = $(cmd_ld); $(cmd_vdso_check) + quiet_cmd_vdsomunge = MUNGE $@ cmd_vdsomunge = $(objtree)/$(obj)/vdsomunge $< $@ diff --git a/arch/s390/kernel/vdso32/note.S b/arch/arm/vdso/note.c index db19d0680a0a..eff5bf9efb8b 100644 --- a/arch/s390/kernel/vdso32/note.S +++ b/arch/arm/vdso/note.c @@ -1,5 +1,7 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +// SPDX-License-Identifier: GPL-2.0 /* + * Copyright (C) 2012-2018 ARM Limited + * * This supplies .note.* sections to go into the PT_NOTE inside the vDSO text. * Here we can supply some information useful to userland. */ @@ -7,7 +9,7 @@ #include <linux/uts.h> #include <linux/version.h> #include <linux/elfnote.h> +#include <linux/build-salt.h> -ELFNOTE_START(Linux, 0, "a") - .long LINUX_VERSION_CODE -ELFNOTE_END +ELFNOTE32("Linux", 0, LINUX_VERSION_CODE); +BUILD_SALT; diff --git a/arch/arm/vdso/vdso.lds.S b/arch/arm/vdso/vdso.lds.S index 73cf205b003e..165d1d2eb76b 100644 --- a/arch/arm/vdso/vdso.lds.S +++ b/arch/arm/vdso/vdso.lds.S @@ -71,6 +71,8 @@ VERSION global: __vdso_clock_gettime; __vdso_gettimeofday; + __vdso_clock_getres; + __vdso_clock_gettime64; local: *; }; } diff --git a/arch/arm/vdso/vgettimeofday.c b/arch/arm/vdso/vgettimeofday.c index d1fdbb12760a..1976c6f325a4 100644 --- a/arch/arm/vdso/vgettimeofday.c +++ b/arch/arm/vdso/vgettimeofday.c @@ -1,259 +1,34 @@ // SPDX-License-Identifier: GPL-2.0-only /* + * ARM userspace implementations of gettimeofday() and similar. + * * Copyright 2015 Mentor Graphics Corporation. */ - -#include <linux/compiler.h> -#include <linux/hrtimer.h> #include <linux/time.h> -#include <asm/barrier.h> -#include <asm/bug.h> -#include <asm/cp15.h> -#include <asm/page.h> -#include <asm/unistd.h> -#include <asm/vdso_datapage.h> - -#ifndef CONFIG_AEABI -#error This code depends on AEABI system call conventions -#endif - -extern struct vdso_data *__get_datapage(void); - -static notrace u32 __vdso_read_begin(const struct vdso_data *vdata) -{ - u32 seq; -repeat: - seq = READ_ONCE(vdata->seq_count); - if (seq & 1) { - cpu_relax(); - goto repeat; - } - return seq; -} - -static notrace u32 vdso_read_begin(const struct vdso_data *vdata) -{ - u32 seq; - - seq = __vdso_read_begin(vdata); - - smp_rmb(); /* Pairs with smp_wmb in vdso_write_end */ - return seq; -} +#include <linux/types.h> -static notrace int vdso_read_retry(const struct vdso_data *vdata, u32 start) +int __vdso_clock_gettime(clockid_t clock, + struct old_timespec32 *ts) { - smp_rmb(); /* Pairs with smp_wmb in vdso_write_begin */ - return vdata->seq_count != start; + return __cvdso_clock_gettime32(clock, ts); } -static notrace long clock_gettime_fallback(clockid_t _clkid, - struct timespec *_ts) +int __vdso_clock_gettime64(clockid_t clock, + struct __kernel_timespec *ts) { - register struct timespec *ts asm("r1") = _ts; - register clockid_t clkid asm("r0") = _clkid; - register long ret asm ("r0"); - register long nr asm("r7") = __NR_clock_gettime; - - asm volatile( - " swi #0\n" - : "=r" (ret) - : "r" (clkid), "r" (ts), "r" (nr) - : "memory"); - - return ret; + return __cvdso_clock_gettime(clock, ts); } -static notrace int do_realtime_coarse(struct timespec *ts, - struct vdso_data *vdata) +int __vdso_gettimeofday(struct __kernel_old_timeval *tv, + struct timezone *tz) { - u32 seq; - - do { - seq = vdso_read_begin(vdata); - - ts->tv_sec = vdata->xtime_coarse_sec; - ts->tv_nsec = vdata->xtime_coarse_nsec; - - } while (vdso_read_retry(vdata, seq)); - - return 0; + return __cvdso_gettimeofday(tv, tz); } -static notrace int do_monotonic_coarse(struct timespec *ts, - struct vdso_data *vdata) +int __vdso_clock_getres(clockid_t clock_id, + struct old_timespec32 *res) { - struct timespec tomono; - u32 seq; - - do { - seq = vdso_read_begin(vdata); - - ts->tv_sec = vdata->xtime_coarse_sec; - ts->tv_nsec = vdata->xtime_coarse_nsec; - - tomono.tv_sec = vdata->wtm_clock_sec; - tomono.tv_nsec = vdata->wtm_clock_nsec; - - } while (vdso_read_retry(vdata, seq)); - - ts->tv_sec += tomono.tv_sec; - timespec_add_ns(ts, tomono.tv_nsec); - - return 0; -} - -#ifdef CONFIG_ARM_ARCH_TIMER - -static notrace u64 get_ns(struct vdso_data *vdata) -{ - u64 cycle_delta; - u64 cycle_now; - u64 nsec; - - isb(); - cycle_now = read_sysreg(CNTVCT); - - cycle_delta = (cycle_now - vdata->cs_cycle_last) & vdata->cs_mask; - - nsec = (cycle_delta * vdata->cs_mult) + vdata->xtime_clock_snsec; - nsec >>= vdata->cs_shift; - - return nsec; -} - -static notrace int do_realtime(struct timespec *ts, struct vdso_data *vdata) -{ - u64 nsecs; - u32 seq; - - do { - seq = vdso_read_begin(vdata); - - if (!vdata->tk_is_cntvct) - return -1; - - ts->tv_sec = vdata->xtime_clock_sec; - nsecs = get_ns(vdata); - - } while (vdso_read_retry(vdata, seq)); - - ts->tv_nsec = 0; - timespec_add_ns(ts, nsecs); - - return 0; -} - -static notrace int do_monotonic(struct timespec *ts, struct vdso_data *vdata) -{ - struct timespec tomono; - u64 nsecs; - u32 seq; - - do { - seq = vdso_read_begin(vdata); - - if (!vdata->tk_is_cntvct) - return -1; - - ts->tv_sec = vdata->xtime_clock_sec; - nsecs = get_ns(vdata); - - tomono.tv_sec = vdata->wtm_clock_sec; - tomono.tv_nsec = vdata->wtm_clock_nsec; - - } while (vdso_read_retry(vdata, seq)); - - ts->tv_sec += tomono.tv_sec; - ts->tv_nsec = 0; - timespec_add_ns(ts, nsecs + tomono.tv_nsec); - - return 0; -} - -#else /* CONFIG_ARM_ARCH_TIMER */ - -static notrace int do_realtime(struct timespec *ts, struct vdso_data *vdata) -{ - return -1; -} - -static notrace int do_monotonic(struct timespec *ts, struct vdso_data *vdata) -{ - return -1; -} - -#endif /* CONFIG_ARM_ARCH_TIMER */ - -notrace int __vdso_clock_gettime(clockid_t clkid, struct timespec *ts) -{ - struct vdso_data *vdata; - int ret = -1; - - vdata = __get_datapage(); - - switch (clkid) { - case CLOCK_REALTIME_COARSE: - ret = do_realtime_coarse(ts, vdata); - break; - case CLOCK_MONOTONIC_COARSE: - ret = do_monotonic_coarse(ts, vdata); - break; - case CLOCK_REALTIME: - ret = do_realtime(ts, vdata); - break; - case CLOCK_MONOTONIC: - ret = do_monotonic(ts, vdata); - break; - default: - break; - } - - if (ret) - ret = clock_gettime_fallback(clkid, ts); - - return ret; -} - -static notrace long gettimeofday_fallback(struct timeval *_tv, - struct timezone *_tz) -{ - register struct timezone *tz asm("r1") = _tz; - register struct timeval *tv asm("r0") = _tv; - register long ret asm ("r0"); - register long nr asm("r7") = __NR_gettimeofday; - - asm volatile( - " swi #0\n" - : "=r" (ret) - : "r" (tv), "r" (tz), "r" (nr) - : "memory"); - - return ret; -} - -notrace int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz) -{ - struct timespec ts; - struct vdso_data *vdata; - int ret; - - vdata = __get_datapage(); - - ret = do_realtime(&ts, vdata); - if (ret) - return gettimeofday_fallback(tv, tz); - - if (tv) { - tv->tv_sec = ts.tv_sec; - tv->tv_usec = ts.tv_nsec / 1000; - } - if (tz) { - tz->tz_minuteswest = vdata->tz_minuteswest; - tz->tz_dsttime = vdata->tz_dsttime; - } - - return ret; + return __cvdso_clock_getres_time32(clock_id, res); } /* Avoid unresolved references emitted by GCC */ diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c index 3c7645d7b9b4..d40e9e5fc52b 100644 --- a/arch/arm/xen/mm.c +++ b/arch/arm/xen/mm.c @@ -71,20 +71,20 @@ static void dma_cache_maint(dma_addr_t handle, size_t size, u32 op) * pfn_valid returns true the pages is local and we can use the native * dma-direct functions, otherwise we call the Xen specific version. */ -void xen_dma_sync_for_cpu(struct device *dev, dma_addr_t handle, - phys_addr_t paddr, size_t size, enum dma_data_direction dir) +void xen_dma_sync_for_cpu(dma_addr_t handle, phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { if (pfn_valid(PFN_DOWN(handle))) - arch_sync_dma_for_cpu(dev, paddr, size, dir); + arch_sync_dma_for_cpu(paddr, size, dir); else if (dir != DMA_TO_DEVICE) dma_cache_maint(handle, size, GNTTAB_CACHE_INVAL); } -void xen_dma_sync_for_device(struct device *dev, dma_addr_t handle, - phys_addr_t paddr, size_t size, enum dma_data_direction dir) +void xen_dma_sync_for_device(dma_addr_t handle, phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { if (pfn_valid(PFN_DOWN(handle))) - arch_sync_dma_for_device(dev, paddr, size, dir); + arch_sync_dma_for_device(paddr, size, dir); else if (dir == DMA_FROM_DEVICE) dma_cache_maint(handle, size, GNTTAB_CACHE_INVAL); else diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index afe6412fe769..b1b4476ddb83 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -12,7 +12,6 @@ config ARM64 select ARCH_CLOCKSOURCE_DATA select ARCH_HAS_DEBUG_VIRTUAL select ARCH_HAS_DEVMEM_IS_ALLOWED - select ARCH_HAS_DMA_COHERENT_TO_PFN select ARCH_HAS_DMA_PREP_COHERENT select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI select ARCH_HAS_FAST_MULTIPLIER diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 16d761475a86..b2b504ea6fd6 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -37,11 +37,12 @@ config ARCH_BCM2835 select PINCTRL select PINCTRL_BCM2835 select ARM_AMBA + select ARM_GIC select ARM_TIMER_SP804 select HAVE_ARM_ARCH_TIMER help - This enables support for the Broadcom BCM2837 SoC. - This SoC is used in the Raspberry Pi 3 device. + This enables support for the Broadcom BCM2837 and BCM2711 SoC. + These SoCs are used in the Raspberry Pi 3 and 4 devices. config ARCH_BCM_IPROC bool "Broadcom iProc SoC Family" @@ -188,6 +189,7 @@ config ARCH_QCOM config ARCH_REALTEK bool "Realtek Platforms" + select RESET_CONTROLLER help This enables support for the ARMv8 based Realtek chipsets, like the RTD1295. @@ -212,6 +214,11 @@ config ARCH_ROCKCHIP This enables support for the ARMv8 based Rockchip chipsets, like the RK3368. +config ARCH_S32 + bool "NXP S32 SoC Family" + help + This enables support for the NXP S32 family of processors. + config ARCH_SEATTLE bool "AMD Seattle SoC Family" help diff --git a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts index 732daaa6e9d3..59291e0ea1ee 100644 --- a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts +++ b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts @@ -12,6 +12,9 @@ model = "Bubblegum-96"; aliases { + mmc0 = &mmc0; + mmc1 = &mmc1; + mmc2 = &mmc2; serial5 = &uart5; }; @@ -23,6 +26,24 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; + + /* Fixed regulator used in the absence of PMIC */ + vcc_3v1: vcc-3v1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.1V"; + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-always-on; + }; + + /* Fixed regulator used in the absence of PMIC */ + sd_vcc: sd-vcc { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.1V"; + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-always-on; + }; }; &i2c0 { @@ -241,6 +262,47 @@ bias-pull-up; }; }; + + mmc0_default: mmc0_default { + pinmux { + groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp", + "sd0_cmd_mfp", "sd0_clk_mfp"; + function = "sd0"; + }; + }; + + mmc2_default: mmc2_default { + pinmux { + groups = "nand0_d0_ceb3_mfp"; + function = "sd2"; + }; + }; +}; + +/* uSD */ +&mmc0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_default>; + no-sdio; + no-mmc; + no-1-8-v; + cd-gpios = <&pinctrl 120 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <&sd_vcc>; + vqmmc-supply = <&sd_vcc>; +}; + +/* eMMC */ +&mmc2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_default>; + no-sdio; + no-sd; + non-removable; + bus-width = <8>; + vmmc-supply = <&vcc_3v1>; }; &timer { diff --git a/arch/arm64/boot/dts/actions/s900.dtsi b/arch/arm64/boot/dts/actions/s900.dtsi index df3a68a3ac97..eb35cf78ab73 100644 --- a/arch/arm64/boot/dts/actions/s900.dtsi +++ b/arch/arm64/boot/dts/actions/s900.dtsi @@ -4,6 +4,7 @@ */ #include <dt-bindings/clock/actions,s900-cmu.h> +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/actions,s900-reset.h> @@ -284,5 +285,49 @@ dma-requests = <46>; clocks = <&cmu CLK_DMAC>; }; + + mmc0: mmc@e0330000 { + compatible = "actions,owl-mmc"; + reg = <0x0 0xe0330000 0x0 0x4000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_SD0>; + resets = <&cmu RESET_SD0>; + dmas = <&dma 2>; + dma-names = "mmc"; + status = "disabled"; + }; + + mmc1: mmc@e0334000 { + compatible = "actions,owl-mmc"; + reg = <0x0 0xe0334000 0x0 0x4000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_SD1>; + resets = <&cmu RESET_SD1>; + dmas = <&dma 3>; + dma-names = "mmc"; + status = "disabled"; + }; + + mmc2: mmc@e0338000 { + compatible = "actions,owl-mmc"; + reg = <0x0 0xe0338000 0x0 0x4000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_SD2>; + resets = <&cmu RESET_SD2>; + dmas = <&dma 4>; + dma-names = "mmc"; + status = "disabled"; + }; + + mmc3: mmc@e033c000 { + compatible = "actions,owl-mmc"; + reg = <0x0 0xe033c000 0x0 0x4000>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_SD3>; + resets = <&cmu RESET_SD3>; + dmas = <&dma 46>; + dma-names = "mmc"; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts index 04446e4716c4..f54a415f2e3b 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts @@ -114,6 +114,19 @@ }; }; +&codec { + status = "okay"; +}; + +&codec_analog { + cpvdd-supply = <®_eldo1>; + status = "okay"; +}; + +&dai { + status = "okay"; +}; + &de { status = "okay"; }; @@ -333,6 +346,22 @@ vcc-hdmi-supply = <®_dldo1>; }; +&sound { + status = "okay"; + simple-audio-card,widgets = "Headphone", "Headphone Jack", + "Microphone", "Microphone Jack", + "Microphone", "Onboard Microphone"; + simple-audio-card,routing = + "Left DAC", "AIF1 Slot 0 Left", + "Right DAC", "AIF1 Slot 0 Right", + "AIF1 Slot 0 Left ADC", "Left ADC", + "AIF1 Slot 0 Right ADC", "Right ADC", + "Headphone Jack", "HP", + "MIC2", "Microphone Jack", + "Onboard Microphone", "MBIAS", + "MIC1", "Onboard Microphone"; +}; + &spi0 { status = "okay"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts index 25099202c52c..920103ec0046 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts @@ -55,6 +55,10 @@ aliases { ethernet0 = &emac; serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; }; chosen { @@ -210,6 +214,27 @@ status = "okay"; }; +/* On Pi-2 connector */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "disabled"; +}; + +/* On Euler connector */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "disabled"; +}; + +/* On Euler connector, RTS/CTS optional */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + status = "disabled"; +}; + &usb_otg { dr_mode = "host"; status = "okay"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts index 1069e7012c9c..970415106dcf 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts @@ -100,18 +100,41 @@ status = "okay"; }; +&de { + status = "okay"; +}; + &ehci1 { status = "okay"; }; -/* The ANX6345 eDP-bridge is on i2c0. There is no linux (mainline) - * driver for this chip at the moment, the bootloader initializes it. - * However it can be accessed with the i2c-dev driver from user space. - */ &i2c0 { clock-frequency = <100000>; status = "okay"; + + anx6345: anx6345@38 { + compatible = "analogix,anx6345"; + reg = <0x38>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ + dvdd25-supply = <®_dldo2>; + dvdd12-supply = <®_dldo3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + anx6345_in: endpoint { + remote-endpoint = <&tcon0_out_anx6345>; + }; + }; + }; + }; +}; + +&mixer0 { + status = "okay"; }; &mmc0 { @@ -319,6 +342,20 @@ status = "okay"; }; +&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rgb666_pins>; + + status = "okay"; +}; + +&tcon0_out { + tcon0_out_anx6345: endpoint@0 { + reg = <0>; + remote-endpoint = <&anx6345_in>; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 70f4cce6be43..27e48234f1c2 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -142,6 +142,15 @@ clock-output-names = "ext-osc32k"; }; + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + psci { compatible = "arm,psci-0.2"; method = "smc"; @@ -478,6 +487,15 @@ reg = <0x1c14000 0x400>; }; + crypto: crypto@1c15000 { + compatible = "allwinner,sun50i-a64-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CE>; + }; + usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-a33-musb"; reg = <0x01c19000 0x0400>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi index 82f4b44d525f..5bec574fa108 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi @@ -23,6 +23,8 @@ compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */ post-power-on-delay-ms = <200>; + clocks = <&rtc 1>; + clock-names = "ext_clock"; }; }; @@ -56,5 +58,16 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vcc3v3>; + vddio-supply = <®_vcc3v3>; + shutdown-gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */ + device-wakeup-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ + }; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi index f002a496d7cb..e92c4de5bf3b 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi @@ -127,6 +127,15 @@ allwinner,sram = <&ve_sram 1>; }; + crypto: crypto@1c15000 { + compatible = "allwinner,sun50i-h5-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CE>; + }; + mali: gpu@1e80000 { compatible = "allwinner,sun50i-h5-mali", "arm,mali-450"; reg = <0x01e80000 0x30000>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts index 1d05d570142f..f335f7482a73 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts @@ -89,6 +89,11 @@ status = "okay"; }; +&gpu { + mali-supply = <®_dcdcc>; + status = "okay"; +}; + &hdmi { status = "okay"; }; @@ -225,6 +230,7 @@ }; reg_dcdcc: dcdcc { + regulator-enable-ramp-delay = <32000>; regulator-min-microvolt = <810000>; regulator-max-microvolt = <1080000>; regulator-name = "vdd-gpu"; @@ -252,6 +258,7 @@ }; &r_ir { + linux,rc-map-name = "rc-beelink-gs1"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts index eb379cd402ac..4ed3fc2c7734 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts @@ -15,6 +15,7 @@ aliases { serial0 = &uart0; + serial1 = &uart1; }; chosen { @@ -94,6 +95,10 @@ status = "okay"; }; +&dwc3 { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -102,6 +107,11 @@ status = "okay"; }; +&gpu { + mali-supply = <®_dcdcc>; + status = "okay"; +}; + &hdmi { status = "okay"; }; @@ -237,6 +247,7 @@ }; reg_dcdcc: dcdcc { + regulator-enable-ramp-delay = <32000>; regulator-min-microvolt = <810000>; regulator-max-microvolt = <1080000>; regulator-name = "vdd-gpu"; @@ -269,6 +280,24 @@ status = "okay"; }; +/* There's the BT part of the AP6256 connected to that UART */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&rtc 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */ + host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */ + shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */ + max-speed = <1500000>; + }; +}; + &usb2otg { /* * This board doesn't have a controllable VBUS even though it @@ -285,3 +314,7 @@ usb3_vbus-supply = <®_vcc5v>; status = "okay"; }; + +&usb3phy { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi index ec9b6a578e3f..df4cbd7ef96c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi @@ -55,6 +55,11 @@ status = "okay"; }; +&gpu { + mali-supply = <®_dcdcc>; + status = "okay"; +}; + &mmc0 { vmmc-supply = <®_cldo1>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; @@ -163,6 +168,7 @@ }; reg_dcdcc: dcdcc { + regulator-enable-ramp-delay = <32000>; regulator-min-microvolt = <810000>; regulator-max-microvolt = <1080000>; regulator-name = "vdd-gpu"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts index 30102daf83cc..74899ede00fb 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts @@ -85,6 +85,11 @@ status = "okay"; }; +&gpu { + mali-supply = <®_dcdcc>; + status = "okay"; +}; + &hdmi { status = "okay"; }; @@ -221,6 +226,7 @@ }; reg_dcdcc: dcdcc { + regulator-enable-ramp-delay = <32000>; regulator-min-microvolt = <810000>; regulator-max-microvolt = <1080000>; regulator-name = "vdd-gpu"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts index 7e7cb10e3d96..bccfe1e65b6a 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts @@ -53,6 +53,10 @@ status = "okay"; }; +&gpu { + status = "okay"; +}; + &hdmi { status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index 0d5ea19336a1..29824081b43b 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -149,6 +149,29 @@ allwinner,sram = <&ve_sram 1>; }; + gpu: gpu@1800000 { + compatible = "allwinner,sun50i-h6-mali", + "arm,mali-t720"; + reg = <0x01800000 0x4000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>; + clock-names = "core", "bus"; + resets = <&ccu RST_BUS_GPU>; + status = "disabled"; + }; + + crypto: crypto@1904000 { + compatible = "allwinner,sun50i-h6-crypto"; + reg = <0x01904000 0x1000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>, <&ccu CLK_MBUS_CE>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_CE>; + }; + syscon: syscon@3000000 { compatible = "allwinner,sun50i-h6-system-control", "allwinner,sun50i-a64-system-control"; @@ -299,6 +322,16 @@ pins = "PH0", "PH1"; function = "uart0"; }; + + uart1_pins: uart1-pins { + pins = "PG6", "PG7"; + function = "uart1"; + }; + + uart1_rts_cts_pins: uart1-rts-cts-pins { + pins = "PG8", "PG9"; + function = "uart1"; + }; }; gic: interrupt-controller@3021000 { @@ -537,6 +570,38 @@ status = "disabled"; }; + dwc3: dwc3@5200000 { + compatible = "snps,dwc3"; + reg = <0x05200000 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_XHCI>, + <&ccu CLK_BUS_XHCI>, + <&rtc 0>; + clock-names = "ref", "bus_early", "suspend"; + resets = <&ccu RST_BUS_XHCI>; + /* + * The datasheet of the chip doesn't declare the + * peripheral function, and there's no boards known + * to have a USB Type-B port routed to the port. + * In addition, no one has tested the peripheral + * function yet. + * So set the dr_mode to "host" in the DTSI file. + */ + dr_mode = "host"; + phys = <&usb3phy>; + phy-names = "usb3-phy"; + status = "disabled"; + }; + + usb3phy: phy@5210000 { + compatible = "allwinner,sun50i-h6-usb3-phy"; + reg = <0x5210000 0x10000>; + clocks = <&ccu CLK_USB_PHY1>; + resets = <&ccu RST_USB_PHY1>; + #phy-cells = <0>; + status = "disabled"; + }; + ehci3: usb@5311000 { compatible = "allwinner,sun50i-h6-ehci", "generic-ehci"; reg = <0x05311000 0x100>; @@ -618,7 +683,6 @@ "tcon-tv0"; clock-output-names = "tcon-top-tv0"; resets = <&ccu RST_BUS_TCON_TOP>; - reset-names = "rst"; #clock-cells = <1>; ports { diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts index 66e4ffb4e929..fb11ef05d556 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -178,12 +178,12 @@ qspi_boot: partition@0 { label = "Boot and fpga data"; - reg = <0x0 0x4000000>; + reg = <0x0 0x034B0000>; }; qspi_rootfs: partition@4000000 { label = "Root Filesystem - JFFS2"; - reg = <0x4000000 0x4000000>; + reg = <0x034B0000 0x0EB50000>; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 84afecba9ec0..63400538d39f 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-ugoos-am6.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb @@ -36,3 +37,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts b/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts new file mode 100644 index 000000000000..69c25c68c358 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "meson-a1.dtsi" + +/ { + compatible = "amlogic,ad401", "amlogic,a1"; + model = "Amlogic Meson A1 AD401 Development Board"; + + aliases { + serial0 = &uart_AO_B; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x8000000>; + }; +}; + +&uart_AO_B { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi new file mode 100644 index 000000000000..7210ad049d1d --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi @@ -0,0 +1,130 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "amlogic,a1"; + + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + l2: l2-cache0 { + compatible = "cache"; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x800000>; + alignment = <0x0 0x400000>; + linux,cma-default; + }; + }; + + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + apb: bus@fe000000 { + compatible = "simple-bus"; + reg = <0x0 0xfe000000 0x0 0x1000000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x1000000>; + + uart_AO: serial@1c00 { + compatible = "amlogic,meson-gx-uart", + "amlogic,meson-ao-uart"; + reg = <0x0 0x1c00 0x0 0x18>; + interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&xtal>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + + uart_AO_B: serial@2000 { + compatible = "amlogic,meson-gx-uart", + "amlogic,meson-ao-uart"; + reg = <0x0 0x2000 0x0 0x18>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&xtal>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + }; + + gic: interrupt-controller@ff901000 { + compatible = "arm,gic-400"; + reg = <0x0 0xff901000 0x0 0x1000>, + <0x0 0xff902000 0x0 0x2000>, + <0x0 0xff904000 0x0 0x2000>, + <0x0 0xff906000 0x0 0x2000>; + interrupt-controller; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + #interrupt-cells = <3>; + #address-cells = <0>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; + }; + + xtal: xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index 82919b106010..04803c3bccfa 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -117,6 +117,7 @@ #address-cells = <1>; #size-cells = <1>; read-only; + secure-monitor = <&sm>; }; psci { @@ -1162,7 +1163,7 @@ toddr_a: audio-controller@100 { compatible = "amlogic,axg-toddr"; - reg = <0x0 0x100 0x0 0x1c>; + reg = <0x0 0x100 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "TODDR_A"; interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>; @@ -1173,7 +1174,7 @@ toddr_b: audio-controller@140 { compatible = "amlogic,axg-toddr"; - reg = <0x0 0x140 0x0 0x1c>; + reg = <0x0 0x140 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "TODDR_B"; interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>; @@ -1184,7 +1185,7 @@ toddr_c: audio-controller@180 { compatible = "amlogic,axg-toddr"; - reg = <0x0 0x180 0x0 0x1c>; + reg = <0x0 0x180 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "TODDR_C"; interrupts = <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>; @@ -1195,7 +1196,7 @@ frddr_a: audio-controller@1c0 { compatible = "amlogic,axg-frddr"; - reg = <0x0 0x1c0 0x0 0x1c>; + reg = <0x0 0x1c0 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "FRDDR_A"; interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>; @@ -1206,7 +1207,7 @@ frddr_b: audio-controller@200 { compatible = "amlogic,axg-frddr"; - reg = <0x0 0x200 0x0 0x1c>; + reg = <0x0 0x200 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "FRDDR_B"; interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>; @@ -1217,7 +1218,7 @@ frddr_c: audio-controller@240 { compatible = "amlogic,axg-frddr"; - reg = <0x0 0x240 0x0 0x1c>; + reg = <0x0 0x240 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "FRDDR_C"; interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index 3f39e020f74e..7fabc8d9654a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -5,51 +5,42 @@ #include <dt-bindings/phy/phy.h> #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/clock/axg-audio-clkc.h> #include <dt-bindings/clock/g12a-clkc.h> #include <dt-bindings/clock/g12a-aoclkc.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h> -#include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h> #include <dt-bindings/reset/amlogic,meson-g12a-reset.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; - tdmif_a: audio-controller-0 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_A"; - clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, - <&clkc_audio AUD_CLKID_MST_A_SCLK>, - <&clkc_audio AUD_CLKID_MST_A_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; - tdmif_b: audio-controller-1 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_B"; - clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, - <&clkc_audio AUD_CLKID_MST_B_SCLK>, - <&clkc_audio AUD_CLKID_MST_B_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; + simplefb_cvbs: framebuffer-cvbs { + compatible = "amlogic,simple-framebuffer", + "simple-framebuffer"; + amlogic,pipeline = "vpu-cvbs"; + clocks = <&clkc CLKID_HDMI>, + <&clkc CLKID_HTX_PCLK>, + <&clkc CLKID_VPU_INTR>; + status = "disabled"; + }; - tdmif_c: audio-controller-2 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_C"; - clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, - <&clkc_audio AUD_CLKID_MST_C_SCLK>, - <&clkc_audio AUD_CLKID_MST_C_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; + simplefb_hdmi: framebuffer-hdmi { + compatible = "amlogic,simple-framebuffer", + "simple-framebuffer"; + amlogic,pipeline = "vpu-hdmi"; + clocks = <&clkc CLKID_HDMI>, + <&clkc CLKID_HTX_PCLK>, + <&clkc CLKID_VPU_INTR>; + status = "disabled"; + }; }; efuse: efuse { @@ -58,6 +49,7 @@ #address-cells = <1>; #size-cells = <1>; read-only; + secure-monitor = <&sm>; }; psci { @@ -95,6 +87,94 @@ #size-cells = <2>; ranges; + pcie: pcie@fc000000 { + compatible = "amlogic,g12a-pcie", "snps,dw-pcie"; + reg = <0x0 0xfc000000 0x0 0x400000 + 0x0 0xff648000 0x0 0x2000 + 0x0 0xfc400000 0x0 0x200000>; + reg-names = "elbi", "cfg", "config"; + interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + bus-range = <0x0 0xff>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x0 0xfc600000 0 0x00100000 + 0x82000000 0 0xfc700000 0x0 0xfc700000 0 0x1900000>; + + clocks = <&clkc CLKID_PCIE_PHY + &clkc CLKID_PCIE_COMB + &clkc CLKID_PCIE_PLL>; + clock-names = "general", + "pclk", + "port"; + resets = <&reset RESET_PCIE_CTRL_A>, + <&reset RESET_PCIE_APB>; + reset-names = "port", + "apb"; + num-lanes = <1>; + phys = <&usb3_pcie_phy PHY_TYPE_PCIE>; + phy-names = "pcie"; + status = "disabled"; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&cpu_temp>; + + trips { + cpu_passive: cpu-passive { + temperature = <85000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + cpu_hot: cpu-hot { + temperature = <95000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "hot"; + }; + + cpu_critical: cpu-critical { + temperature = <110000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + }; + + ddr_thermal: ddr-thermal { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&ddr_temp>; + + trips { + ddr_passive: ddr-passive { + temperature = <85000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + ddr_critical: ddr-critical { + temperature = <110000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map { + trip = <&ddr_passive>; + cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + ethmac: ethernet@ff3f0000 { compatible = "amlogic,meson-axg-dwmac", "snps,dwmac-3.70a", @@ -1356,6 +1436,26 @@ }; }; + cpu_temp: temperature-sensor@34800 { + compatible = "amlogic,g12a-cpu-thermal", + "amlogic,g12a-thermal"; + reg = <0x0 0x34800 0x0 0x50>; + interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_TS>; + #thermal-sensor-cells = <0>; + amlogic,ao-secure = <&sec_AO>; + }; + + ddr_temp: temperature-sensor@34c00 { + compatible = "amlogic,g12a-ddr-thermal", + "amlogic,g12a-thermal"; + reg = <0x0 0x34c00 0x0 0x50>; + interrupts = <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_TS>; + #thermal-sensor-cells = <0>; + amlogic,ao-secure = <&sec_AO>; + }; + usb2_phy0: phy@36000 { compatible = "amlogic,g12a-usb2-phy"; reg = <0x0 0x36000 0x0 0x2000>; @@ -1457,290 +1557,6 @@ }; }; - pdm: audio-controller@40000 { - compatible = "amlogic,g12a-pdm", - "amlogic,axg-pdm"; - reg = <0x0 0x40000 0x0 0x34>; - #sound-dai-cells = <0>; - sound-name-prefix = "PDM"; - clocks = <&clkc_audio AUD_CLKID_PDM>, - <&clkc_audio AUD_CLKID_PDM_DCLK>, - <&clkc_audio AUD_CLKID_PDM_SYSCLK>; - clock-names = "pclk", "dclk", "sysclk"; - status = "disabled"; - }; - - audio: bus@42000 { - compatible = "simple-bus"; - reg = <0x0 0x42000 0x0 0x2000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x42000 0x0 0x2000>; - - clkc_audio: clock-controller@0 { - status = "disabled"; - compatible = "amlogic,g12a-audio-clkc"; - reg = <0x0 0x0 0x0 0xb4>; - #clock-cells = <1>; - #reset-cells = <1>; - - clocks = <&clkc CLKID_AUDIO>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>, - <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL3>, - <&clkc CLKID_HIFI_PLL>, - <&clkc CLKID_FCLK_DIV3>, - <&clkc CLKID_FCLK_DIV4>, - <&clkc CLKID_GP0_PLL>; - clock-names = "pclk", - "mst_in0", - "mst_in1", - "mst_in2", - "mst_in3", - "mst_in4", - "mst_in5", - "mst_in6", - "mst_in7"; - - resets = <&reset RESET_AUDIO>; - }; - - toddr_a: audio-controller@100 { - compatible = "amlogic,g12a-toddr", - "amlogic,axg-toddr"; - reg = <0x0 0x100 0x0 0x1c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_A"; - interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_TODDR_A>; - resets = <&arb AXG_ARB_TODDR_A>; - status = "disabled"; - }; - - toddr_b: audio-controller@140 { - compatible = "amlogic,g12a-toddr", - "amlogic,axg-toddr"; - reg = <0x0 0x140 0x0 0x1c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_B"; - interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_TODDR_B>; - resets = <&arb AXG_ARB_TODDR_B>; - status = "disabled"; - }; - - toddr_c: audio-controller@180 { - compatible = "amlogic,g12a-toddr", - "amlogic,axg-toddr"; - reg = <0x0 0x180 0x0 0x1c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_C"; - interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_TODDR_C>; - resets = <&arb AXG_ARB_TODDR_C>; - status = "disabled"; - }; - - frddr_a: audio-controller@1c0 { - compatible = "amlogic,g12a-frddr", - "amlogic,axg-frddr"; - reg = <0x0 0x1c0 0x0 0x1c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_A"; - interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; - resets = <&arb AXG_ARB_FRDDR_A>; - status = "disabled"; - }; - - frddr_b: audio-controller@200 { - compatible = "amlogic,g12a-frddr", - "amlogic,axg-frddr"; - reg = <0x0 0x200 0x0 0x1c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_B"; - interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; - resets = <&arb AXG_ARB_FRDDR_B>; - status = "disabled"; - }; - - frddr_c: audio-controller@240 { - compatible = "amlogic,g12a-frddr", - "amlogic,axg-frddr"; - reg = <0x0 0x240 0x0 0x1c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_C"; - interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; - resets = <&arb AXG_ARB_FRDDR_C>; - status = "disabled"; - }; - - arb: reset-controller@280 { - status = "disabled"; - compatible = "amlogic,meson-axg-audio-arb"; - reg = <0x0 0x280 0x0 0x4>; - #reset-cells = <1>; - clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; - }; - - tdmin_a: audio-controller@300 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x300 0x0 0x40>; - sound-name-prefix = "TDMIN_A"; - resets = <&clkc_audio AUD_RESET_TDMIN_A>; - clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, - <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_b: audio-controller@340 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x340 0x0 0x40>; - sound-name-prefix = "TDMIN_B"; - resets = <&clkc_audio AUD_RESET_TDMIN_B>; - clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, - <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_c: audio-controller@380 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x380 0x0 0x40>; - sound-name-prefix = "TDMIN_C"; - resets = <&clkc_audio AUD_RESET_TDMIN_C>; - clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, - <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_lb: audio-controller@3c0 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x3c0 0x0 0x40>; - sound-name-prefix = "TDMIN_LB"; - resets = <&clkc_audio AUD_RESET_TDMIN_LB>; - clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, - <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - spdifin: audio-controller@400 { - compatible = "amlogic,g12a-spdifin", - "amlogic,axg-spdifin"; - reg = <0x0 0x400 0x0 0x30>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFIN"; - interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_SPDIFIN>, - <&clkc_audio AUD_CLKID_SPDIFIN_CLK>; - clock-names = "pclk", "refclk"; - status = "disabled"; - }; - - spdifout: audio-controller@480 { - compatible = "amlogic,g12a-spdifout", - "amlogic,axg-spdifout"; - reg = <0x0 0x480 0x0 0x50>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFOUT"; - clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, - <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; - clock-names = "pclk", "mclk"; - status = "disabled"; - }; - - tdmout_a: audio-controller@500 { - compatible = "amlogic,g12a-tdmout"; - reg = <0x0 0x500 0x0 0x40>; - sound-name-prefix = "TDMOUT_A"; - resets = <&clkc_audio AUD_RESET_TDMOUT_A>; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, - <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmout_b: audio-controller@540 { - compatible = "amlogic,g12a-tdmout"; - reg = <0x0 0x540 0x0 0x40>; - sound-name-prefix = "TDMOUT_B"; - resets = <&clkc_audio AUD_RESET_TDMOUT_B>; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, - <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmout_c: audio-controller@580 { - compatible = "amlogic,g12a-tdmout"; - reg = <0x0 0x580 0x0 0x40>; - sound-name-prefix = "TDMOUT_C"; - resets = <&clkc_audio AUD_RESET_TDMOUT_C>; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, - <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - spdifout_b: audio-controller@680 { - compatible = "amlogic,g12a-spdifout", - "amlogic,axg-spdifout"; - reg = <0x0 0x680 0x0 0x50>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFOUT_B"; - clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>, - <&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>; - clock-names = "pclk", "mclk"; - status = "disabled"; - }; - - tohdmitx: audio-controller@744 { - compatible = "amlogic,g12a-tohdmitx"; - reg = <0x0 0x744 0x0 0x4>; - #sound-dai-cells = <1>; - sound-name-prefix = "TOHDMITX"; - status = "disabled"; - }; - }; - usb3_pcie_phy: phy@46000 { compatible = "amlogic,g12a-usb3-pcie-phy"; reg = <0x0 0x46000 0x0 0x2000>; @@ -2388,10 +2204,10 @@ compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost"; reg = <0x0 0xffe40000 0x0 0x40000>; interrupt-parent = <&gic>; - interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "gpu", "mmu", "job"; + <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; clocks = <&clkc CLKID_MALI>; resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>; @@ -2409,6 +2225,7 @@ assigned-clock-rates = <0>, /* Do Nothing */ <800000000>, <0>; /* Do Nothing */ + #cooling-cells = <2>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi new file mode 100644 index 000000000000..b3ba2fda8af8 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi @@ -0,0 +1,392 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Jerome Brunet <jbrunet@baylibre.com> + */ + +#include "meson-g12-common.dtsi" +#include <dt-bindings/clock/axg-audio-clkc.h> +#include <dt-bindings/power/meson-g12a-power.h> +#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h> +#include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h> + +/ { + tdmif_a: audio-controller-0 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_A"; + clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, + <&clkc_audio AUD_CLKID_MST_A_SCLK>, + <&clkc_audio AUD_CLKID_MST_A_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + tdmif_b: audio-controller-1 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_B"; + clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, + <&clkc_audio AUD_CLKID_MST_B_SCLK>, + <&clkc_audio AUD_CLKID_MST_B_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + tdmif_c: audio-controller-2 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_C"; + clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, + <&clkc_audio AUD_CLKID_MST_C_SCLK>, + <&clkc_audio AUD_CLKID_MST_C_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; +}; + +&apb { + pdm: audio-controller@40000 { + compatible = "amlogic,g12a-pdm", + "amlogic,axg-pdm"; + reg = <0x0 0x40000 0x0 0x34>; + #sound-dai-cells = <0>; + sound-name-prefix = "PDM"; + clocks = <&clkc_audio AUD_CLKID_PDM>, + <&clkc_audio AUD_CLKID_PDM_DCLK>, + <&clkc_audio AUD_CLKID_PDM_SYSCLK>; + clock-names = "pclk", "dclk", "sysclk"; + status = "disabled"; + }; + + audio: bus@42000 { + compatible = "simple-bus"; + reg = <0x0 0x42000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x42000 0x0 0x2000>; + + clkc_audio: clock-controller@0 { + status = "disabled"; + compatible = "amlogic,g12a-audio-clkc"; + reg = <0x0 0x0 0x0 0xb4>; + #clock-cells = <1>; + #reset-cells = <1>; + + clocks = <&clkc CLKID_AUDIO>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL3>, + <&clkc CLKID_HIFI_PLL>, + <&clkc CLKID_FCLK_DIV3>, + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_GP0_PLL>; + clock-names = "pclk", + "mst_in0", + "mst_in1", + "mst_in2", + "mst_in3", + "mst_in4", + "mst_in5", + "mst_in6", + "mst_in7"; + + resets = <&reset RESET_AUDIO>; + }; + + toddr_a: audio-controller@100 { + compatible = "amlogic,g12a-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x100 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_A"; + interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_A>; + resets = <&arb AXG_ARB_TODDR_A>, + <&clkc_audio AUD_RESET_TODDR_A>; + reset-names = "arb", "rst"; + status = "disabled"; + }; + + toddr_b: audio-controller@140 { + compatible = "amlogic,g12a-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x140 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_B"; + interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_B>; + resets = <&arb AXG_ARB_TODDR_B>, + <&clkc_audio AUD_RESET_TODDR_B>; + reset-names = "arb", "rst"; + status = "disabled"; + }; + + toddr_c: audio-controller@180 { + compatible = "amlogic,g12a-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x180 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_C"; + interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_C>; + resets = <&arb AXG_ARB_TODDR_C>, + <&clkc_audio AUD_RESET_TODDR_C>; + reset-names = "arb", "rst"; + status = "disabled"; + }; + + frddr_a: audio-controller@1c0 { + compatible = "amlogic,g12a-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x1c0 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_A"; + interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; + resets = <&arb AXG_ARB_FRDDR_A>, + <&clkc_audio AUD_RESET_FRDDR_A>; + reset-names = "arb", "rst"; + status = "disabled"; + }; + + frddr_b: audio-controller@200 { + compatible = "amlogic,g12a-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x200 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_B"; + interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; + resets = <&arb AXG_ARB_FRDDR_B>, + <&clkc_audio AUD_RESET_FRDDR_B>; + reset-names = "arb", "rst"; + status = "disabled"; + }; + + frddr_c: audio-controller@240 { + compatible = "amlogic,g12a-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x240 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_C"; + interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; + resets = <&arb AXG_ARB_FRDDR_C>, + <&clkc_audio AUD_RESET_FRDDR_C>; + reset-names = "arb", "rst"; + status = "disabled"; + }; + + arb: reset-controller@280 { + status = "disabled"; + compatible = "amlogic,meson-axg-audio-arb"; + reg = <0x0 0x280 0x0 0x4>; + #reset-cells = <1>; + clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; + }; + + tdmin_a: audio-controller@300 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x300 0x0 0x40>; + sound-name-prefix = "TDMIN_A"; + resets = <&clkc_audio AUD_RESET_TDMIN_A>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_b: audio-controller@340 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x340 0x0 0x40>; + sound-name-prefix = "TDMIN_B"; + resets = <&clkc_audio AUD_RESET_TDMIN_B>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_c: audio-controller@380 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x380 0x0 0x40>; + sound-name-prefix = "TDMIN_C"; + resets = <&clkc_audio AUD_RESET_TDMIN_C>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_lb: audio-controller@3c0 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x3c0 0x0 0x40>; + sound-name-prefix = "TDMIN_LB"; + resets = <&clkc_audio AUD_RESET_TDMIN_LB>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + spdifin: audio-controller@400 { + compatible = "amlogic,g12a-spdifin", + "amlogic,axg-spdifin"; + reg = <0x0 0x400 0x0 0x30>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFIN"; + interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_SPDIFIN>, + <&clkc_audio AUD_CLKID_SPDIFIN_CLK>; + clock-names = "pclk", "refclk"; + resets = <&clkc_audio AUD_RESET_SPDIFIN>; + status = "disabled"; + }; + + spdifout: audio-controller@480 { + compatible = "amlogic,g12a-spdifout", + "amlogic,axg-spdifout"; + reg = <0x0 0x480 0x0 0x50>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFOUT"; + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, + <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; + clock-names = "pclk", "mclk"; + resets = <&clkc_audio AUD_RESET_SPDIFOUT>; + status = "disabled"; + }; + + tdmout_a: audio-controller@500 { + compatible = "amlogic,g12a-tdmout"; + reg = <0x0 0x500 0x0 0x40>; + sound-name-prefix = "TDMOUT_A"; + resets = <&clkc_audio AUD_RESET_TDMOUT_A>; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_b: audio-controller@540 { + compatible = "amlogic,g12a-tdmout"; + reg = <0x0 0x540 0x0 0x40>; + sound-name-prefix = "TDMOUT_B"; + resets = <&clkc_audio AUD_RESET_TDMOUT_B>; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_c: audio-controller@580 { + compatible = "amlogic,g12a-tdmout"; + reg = <0x0 0x580 0x0 0x40>; + sound-name-prefix = "TDMOUT_C"; + resets = <&clkc_audio AUD_RESET_TDMOUT_C>; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + spdifout_b: audio-controller@680 { + compatible = "amlogic,g12a-spdifout", + "amlogic,axg-spdifout"; + reg = <0x0 0x680 0x0 0x50>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFOUT_B"; + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>, + <&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>; + clock-names = "pclk", "mclk"; + resets = <&clkc_audio AUD_RESET_SPDIFOUT_B>; + status = "disabled"; + }; + + tohdmitx: audio-controller@744 { + compatible = "amlogic,g12a-tohdmitx"; + reg = <0x0 0x744 0x0 0x4>; + #sound-dai-cells = <1>; + sound-name-prefix = "TOHDMITX"; + resets = <&clkc_audio AUD_RESET_TOHDMITX>; + status = "disabled"; + }; + }; +}; + +&cpu_thermal { + cooling-maps { + map0 { + trip = <&cpu_passive>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +ðmac { + power-domains = <&pwrc PWRC_G12A_ETH_ID>; +}; + +&vpu { + power-domains = <&pwrc PWRC_G12A_VPU_ID>; +}; + +&sd_emmc_a { + amlogic,dram-access-quirk; +}; + +&simplefb_cvbs { + power-domains = <&pwrc PWRC_G12A_VPU_ID>; +}; + +&simplefb_hdmi { + power-domains = <&pwrc PWRC_G12A_VPU_ID>; +}; + diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts index c9fa23a56562..2ac9e3a43b96 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts @@ -438,6 +438,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts index 17155fb73fce..4f2596d82989 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts @@ -409,6 +409,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi index eb5d177d7a99..fb0ab27d1f64 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi @@ -3,8 +3,7 @@ * Copyright (c) 2018 Amlogic, Inc. All rights reserved. */ -#include "meson-g12-common.dtsi" -#include <dt-bindings/power/meson-g12a-power.h> +#include "meson-g12.dtsi" / { compatible = "amlogic,g12a"; @@ -19,6 +18,7 @@ reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -27,6 +27,7 @@ reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -35,6 +36,7 @@ reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -43,6 +45,7 @@ reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; l2: l2-cache0 { @@ -111,14 +114,22 @@ }; }; -ðmac { - power-domains = <&pwrc PWRC_G12A_ETH_ID>; -}; - -&vpu { - power-domains = <&pwrc PWRC_G12A_VPU_ID>; -}; +&cpu_thermal { + cooling-maps { + map0 { + trip = <&cpu_passive>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; -&sd_emmc_a { - amlogic,dram-access-quirk; + map1 { + trip = <&cpu_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts index 3a6a1e0c1e32..124a80901084 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts @@ -14,3 +14,28 @@ / { compatible = "khadas,vim3", "amlogic,a311d", "amlogic,g12b"; }; + +/* + * The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential + * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between + * an USB3.0 Type A connector and a M.2 Key M slot. + * The PHY driving these differential lines is shared between + * the USB3.0 controller and the PCIe Controller, thus only + * a single controller can use it. + * If the MCU is configured to mux the PCIe/USB3.0 differential lines + * to the M.2 Key M slot, uncomment the following block to disable + * USB3.0 from the USB Complex and enable the PCIe controller. + * The End User is not expected to uncomment the following except for + * testing purposes, but instead rely on the firmware/bootloader to + * update these nodes accordingly if PCIe mode is selected by the MCU. + */ +/* +&pcie { + status = "okay"; +}; + +&usb { + phys = <&usb2_phy0>, <&usb2_phy1>; + phy-names = "usb2-phy0", "usb2-phy1"; +}; + */ diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts index 42f15405750c..0e54c1dc2842 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts @@ -12,7 +12,7 @@ #include <dt-bindings/sound/meson-g12a-tohdmitx.h> / { - compatible = "hardkernel,odroid-n2", "amlogic,g12b"; + compatible = "hardkernel,odroid-n2", "amlogic,s922x", "amlogic,g12b"; model = "Hardkernel ODROID-N2"; aliases { diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts index b73deb282120..bba98f982ad6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts @@ -14,3 +14,28 @@ / { compatible = "khadas,vim3", "amlogic,s922x", "amlogic,g12b"; }; + +/* + * The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential + * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between + * an USB3.0 Type A connector and a M.2 Key M slot. + * The PHY driving these differential lines is shared between + * the USB3.0 controller and the PCIe Controller, thus only + * a single controller can use it. + * If the MCU is configured to mux the PCIe/USB3.0 differential lines + * to the M.2 Key M slot, uncomment the following block to disable + * USB3.0 from the USB Complex and enable the PCIe controller. + * The End User is not expected to uncomment the following except for + * testing purposes, but instead rely on the firmware/bootloader to + * update these nodes accordingly if PCIe mode is selected by the MCU. + */ +/* +&pcie { + status = "okay"; +}; + +&usb { + phys = <&usb2_phy0>, <&usb2_phy1>; + phy-names = "usb2-phy0", "usb2-phy1"; +}; + */ diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts new file mode 100644 index 000000000000..ccd0bced01e8 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts @@ -0,0 +1,557 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-g12b.dtsi" +#include "meson-g12b-s922x.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + compatible = "ugoos,am6", "amlogic,g12b"; + model = "Ugoos AM6"; + + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + spdif_dit: audio-codec-1 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + status = "okay"; + sound-name-prefix = "DIT"; + }; + + flash_1v8: regulator-flash_1v8 { + compatible = "regulator-fixed"; + regulator-name = "FLASH_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + main_12v: regulator-main_12v { + compatible = "regulator-fixed"; + regulator-name = "12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "VCC_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&main_12v>; + + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-high; + }; + + vcc_1v8: regulator-vcc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + /* FIXME: actually controlled by VDDCPU_B_EN */ + }; + + vddcpu_a: regulator-vddcpu-a { + /* + * MP1653 Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_A"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&main_12v>; + + pwms = <&pwm_ab 0 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vddcpu_b: regulator-vddcpu-b { + /* + * MP1652 Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_B"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&main_12v>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + usb1_pow: regulator-usb1-pow { + compatible = "regulator-fixed"; + regulator-name = "USB1_POW"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + /* connected to SY6280A Power Switch */ + gpio = <&gpio GPIOA_8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usb_pwr_en: regulator-usb-pwr-en { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR_EN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + /* Connected to USB3 Type-A Port power enable */ + gpio = <&gpio GPIOAO_7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vddao_1v8: regulator-vddao-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&main_12v>; + regulator-always-on; + }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "G12B-UGOOS-AM6"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT", + "SPDIFOUT IN 0", "FRDDR_A OUT 3", + "SPDIFOUT IN 1", "FRDDR_B OUT 3", + "SPDIFOUT IN 2", "FRDDR_C OUT 3"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* spdif hdmi or toslink interface */ + dai-link-4 { + sound-dai = <&spdifout>; + + codec-0 { + sound-dai = <&spdif_dit>; + }; + + codec-1 { + sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>; + }; + }; + + /* spdif hdmi interface */ + dai-link-5 { + sound-dai = <&spdifout_b>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-6 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; +}; + +&arb { + status = "okay"; +}; + +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + status = "disabled"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&clkc_audio { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu100 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu101 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu102 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu103 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; + linux,rc-map-name = "rc-khadas"; +}; + +&pwm_ab { + pinctrl-0 = <&pwm_a_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; + status = "okay"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +&pwm_ef { + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; + status = "okay"; +}; + +/* SDIO */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr50; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_1v8>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <100000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&flash_1v8>; +}; + +&spdifout { + pinctrl-0 = <&spdif_out_h_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&spdifout_b { + status = "okay"; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + dr_mode = "host"; + vbus-regulator = <&usb_pwr_en>; +}; + +&usb2_phy0 { + phy-supply = <&usb1_pow>; +}; + +&usb2_phy1 { + phy-supply = <&usb1_pow>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi index 5628ccd54531..6dbc3968045b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi @@ -4,8 +4,7 @@ * Author: Neil Armstrong <narmstrong@baylibre.com> */ -#include "meson-g12-common.dtsi" -#include <dt-bindings/power/meson-g12a-power.h> +#include "meson-g12.dtsi" / { compatible = "amlogic,g12b"; @@ -49,7 +48,9 @@ compatible = "arm,cortex-a53"; reg = <0x0 0x0>; enable-method = "psci"; + capacity-dmips-mhz = <592>; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -57,7 +58,9 @@ compatible = "arm,cortex-a53"; reg = <0x0 0x1>; enable-method = "psci"; + capacity-dmips-mhz = <592>; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu100: cpu@100 { @@ -65,7 +68,9 @@ compatible = "arm,cortex-a73"; reg = <0x0 0x100>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu101: cpu@101 { @@ -73,7 +78,9 @@ compatible = "arm,cortex-a73"; reg = <0x0 0x101>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu102: cpu@102 { @@ -81,7 +88,9 @@ compatible = "arm,cortex-a73"; reg = <0x0 0x102>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu103: cpu@103 { @@ -89,7 +98,9 @@ compatible = "arm,cortex-a73"; reg = <0x0 0x103>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; next-level-cache = <&l2>; + #cooling-cells = <2>; }; l2: l2-cache0 { @@ -102,14 +113,3 @@ compatible = "amlogic,g12b-clkc"; }; -ðmac { - power-domains = <&pwrc PWRC_G12A_ETH_ID>; -}; - -&vpu { - power-domains = <&pwrc PWRC_G12A_VPU_ID>; -}; - -&sd_emmc_a { - amlogic,dram-access-quirk; -}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index a9b778571cf5..12d5e333e5f2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -169,6 +169,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 6733050d735f..40db06e28b66 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -161,6 +161,7 @@ #address-cells = <1>; #size-cells = <1>; read-only; + secure-monitor = <&sm>; sn: sn@14 { reg = <0x14 0x10>; @@ -240,7 +241,7 @@ }; i2c_A: i2c@8500 { - compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; + compatible = "amlogic,meson-gxbb-i2c"; reg = <0x0 0x08500 0x0 0x20>; interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; @@ -290,7 +291,7 @@ }; i2c_B: i2c@87c0 { - compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; + compatible = "amlogic,meson-gxbb-i2c"; reg = <0x0 0x087c0 0x0 0x20>; interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; @@ -299,7 +300,7 @@ }; i2c_C: i2c@87e0 { - compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; + compatible = "amlogic,meson-gxbb-i2c"; reg = <0x0 0x087e0 0x0 0x20>; interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; @@ -391,6 +392,7 @@ compatible = "amlogic,meson-gx-ao-cec"; reg = <0x0 0x00100 0x0 0x14>; interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; }; sec_AO: ao-secure@140 { @@ -414,7 +416,7 @@ }; i2c_AO: i2c@500 { - compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; + compatible = "amlogic,meson-gxbb-i2c"; reg = <0x0 0x500 0x0 0x20>; interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts index 233eb1cd7967..d6ca684e0e61 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts @@ -280,6 +280,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddio_ao3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index afcf8a9f667b..65ec7dea828c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts @@ -220,6 +220,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index 6039adda12ee..6ded279c40c8 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -36,8 +36,15 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + /* + * signal name from schematics: PWREN + */ gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; enable-active-high; + /* + * signal name from schematics: USB_POWER + */ + vin-supply = <&p5v0>; }; leds { @@ -50,18 +57,38 @@ }; }; + p5v0: regulator-p5v0 { + compatible = "regulator-fixed"; + + regulator-name = "P5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + hdmi_p5v0: regulator-hdmi_p5v0 { + compatible = "regulator-fixed"; + regulator-name = "HDMI_P5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + /* AP2331SA-7 */ + vin-supply = <&p5v0>; + }; + tflash_vdd: regulator-tflash_vdd { - /* - * signal name from schematics: TFLASH_VDD_EN - */ compatible = "regulator-fixed"; regulator-name = "TFLASH_VDD"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + /* + * signal name from schematics: TFLASH_VDD_EN + */ gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>; enable-active-high; + /* U16 RT9179GB */ + vin-supply = <&vddio_ao3v3>; }; tf_io: gpio-regulator-tf_io { @@ -79,6 +106,8 @@ states = <3300000 0>, <1800000 1>; + /* U12/U13 RT9179GB */ + vin-supply = <&vddio_ao3v3>; }; vcc1v8: regulator-vcc1v8 { @@ -86,6 +115,9 @@ regulator-name = "VCC1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; + /* U18 RT9179GB */ + vin-supply = <&vddio_ao3v3>; }; vcc3v3: regulator-vcc3v3 { @@ -95,6 +127,36 @@ regulator-max-microvolt = <3300000>; }; + vddio_ao1v8: regulator-vddio-ao1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + /* U17 RT9179GB */ + vin-supply = <&p5v0>; + }; + + vddio_ao3v3: regulator-vddio-ao3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + /* U11 MP2161GJ-C499 */ + vin-supply = <&p5v0>; + }; + + ddr3_1v5: regulator-ddr3_1v5 { + compatible = "regulator-fixed"; + regulator-name = "DDR3_1V5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + /* U15 MP2161GJ-C499 */ + vin-supply = <&p5v0>; + }; + emmc_pwrseq: emmc-pwrseq { compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; @@ -167,6 +229,7 @@ status = "okay"; pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; pinctrl-names = "default"; + hdmi-supply = <&hdmi_p5v0>; }; &hdmi_tx_tmds_port { @@ -296,7 +359,7 @@ }; &usb0_phy { - status = "okay"; + status = "disabled"; phy-supply = <&usb_otg_pwr>; }; @@ -306,7 +369,7 @@ }; &usb0 { - status = "okay"; + status = "disabled"; }; &usb1 { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index 89f7b41b0e9e..e803a466fe4e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi @@ -170,6 +170,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi index 43b11e3dfe11..5eab3dfdbd55 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi @@ -152,6 +152,7 @@ status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; pinctrl-names = "default"; + linux,rc-map-name = "rc-vega-s9x"; }; &pwm_ef { @@ -183,6 +184,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi index 4c539881fbb7..dee51cf95223 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi @@ -200,6 +200,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts index 82b1c4851147..4d5949496596 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts @@ -14,7 +14,7 @@ / { compatible = "libretech,aml-s805x-ac", "amlogic,s805x", "amlogic,meson-gxl"; - model = "Libre Computer Board AML-S805X-AC"; + model = "Libre Computer AML-S805X-AC"; aliases { serial0 = &uart_AO; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts index 3a1484e5b8e1..a1119cfb0280 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts @@ -165,6 +165,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts index 2a5cd303123d..440bc23c7342 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -33,11 +33,9 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; - button@0 { + power-button { label = "power"; linux,code = <KEY_POWER>; gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; @@ -192,6 +190,9 @@ bluetooth { compatible = "brcm,bcm43438-bt"; shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index 4b8ce738e213..e8348b2728db 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -12,8 +12,9 @@ #include "meson-gxl-s905x.dtsi" / { - compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl"; - model = "Libre Computer Board AML-S905X-CC"; + compatible = "libretech,aml-s905x-cc", "amlogic,s905x", + "amlogic,meson-gxl"; + model = "Libre Computer AML-S905X-CC"; aliases { serial0 = &uart_AO; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts index c433a031841f..62dd87821ce5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts @@ -165,6 +165,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi index e3c16f50814b..43eb7d149e36 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi @@ -119,6 +119,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 49ff0a7d0210..ed33d8efaf62 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -36,6 +36,16 @@ phys = <&usb3_phy>, <&usb2_phy0>, <&usb2_phy1>; }; }; + + crypto: crypto@c883e000 { + compatible = "amlogic,gxl-crypto"; + reg = <0x0 0xc883e000 0x0 0x36>; + interrupts = <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_BLKMV>; + clock-names = "blkmv"; + status = "okay"; + }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts index f25ddd18a607..f82f25c1a5f9 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts @@ -332,6 +332,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; @@ -409,6 +412,9 @@ bluetooth { compatible = "brcm,bcm43438-bt"; shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts index 5cd4d35006d0..420a88e9a195 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts @@ -148,6 +148,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts index e2ea6753263b..0bdf51d041ae 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts @@ -35,3 +35,7 @@ reg = <0>; }; }; + +&ir { + linux,rc-map-name = "rc-vega-s9x"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi index a0e677d5a8f7..5ff64a0d2dcf 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi @@ -96,10 +96,10 @@ compatible = "amlogic,meson-gxm-mali", "arm,mali-t820"; reg = <0x0 0xc0000 0x0 0x40000>; interrupt-parent = <&gic>; - interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "gpu", "mmu", "job"; + <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; clocks = <&clkc CLKID_MALI>; resets = <&reset RESET_MALI_CAPB3>, <&reset RESET_MALI>; diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi index 8647da7d6609..90815fa25ec6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi @@ -246,6 +246,10 @@ linux,rc-map-name = "rc-khadas"; }; +&pcie { + reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>; +}; + &pwm_ef { status = "okay"; pinctrl-0 = <&pwm_e_pins>; @@ -274,6 +278,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vsys_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts index 5233bd7cacfb..dbbf29a0dbf6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts @@ -68,3 +68,28 @@ clock-names = "clkin1"; status = "okay"; }; + +/* + * The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential + * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between + * an USB3.0 Type A connector and a M.2 Key M slot. + * The PHY driving these differential lines is shared between + * the USB3.0 controller and the PCIe Controller, thus only + * a single controller can use it. + * If the MCU is configured to mux the PCIe/USB3.0 differential lines + * to the M.2 Key M slot, uncomment the following block to disable + * USB3.0 from the USB Complex and enable the PCIe controller. + * The End User is not expected to uncomment the following except for + * testing purposes, but instead rely on the firmware/bootloader to + * update these nodes accordingly if PCIe mode is selected by the MCU. + */ +/* +&pcie { + status = "okay"; +}; + +&usb { + phys = <&usb2_phy0>, <&usb2_phy1>; + phy-names = "usb2-phy0", "usb2-phy1"; +}; + */ diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts index 3435aaa4e8db..5bd07469766b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts @@ -9,6 +9,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> / { compatible = "seirobotics,sei610", "amlogic,sm1"; @@ -19,6 +20,22 @@ ethernet0 = ðmac; }; + mono_dac: audio-codec-0 { + compatible = "maxim,max98357a"; + #sound-dai-cells = <0>; + sound-name-prefix = "U16"; + sdmode-gpios = <&gpio GPIOX_8 GPIO_ACTIVE_HIGH>; + }; + + dmics: audio-codec-1 { + #sound-dai-cells = <0>; + compatible = "dmic-codec"; + num-channels = <2>; + wakeup-delay-ms = <50>; + status = "okay"; + sound-name-prefix = "MIC"; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -179,6 +196,120 @@ clock-names = "ext_clock"; }; + sound { + compatible = "amlogic,axg-sound-card"; + model = "SM1-SEI610"; + audio-aux-devs = <&tdmout_a>, <&tdmout_b>, + <&tdmin_a>, <&tdmin_b>; + audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", + "TDMOUT_A IN 1", "FRDDR_B OUT 0", + "TDMOUT_A IN 2", "FRDDR_C OUT 0", + "TDM_A Playback", "TDMOUT_A OUT", + "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT", + "TODDR_A IN 4", "PDM Capture", + "TODDR_B IN 4", "PDM Capture", + "TODDR_C IN 4", "PDM Capture", + "TDMIN_A IN 0", "TDM_A Capture", + "TDMIN_A IN 3", "TDM_A Loopback", + "TDMIN_B IN 0", "TDM_A Capture", + "TDMIN_B IN 3", "TDM_A Loopback", + "TDMIN_A IN 1", "TDM_B Capture", + "TDMIN_A IN 4", "TDM_B Loopback", + "TDMIN_B IN 1", "TDM_B Capture", + "TDMIN_B IN 4", "TDM_B Loopback", + "TODDR_A IN 0", "TDMIN_A OUT", + "TODDR_B IN 0", "TDMIN_A OUT", + "TODDR_C IN 0", "TDMIN_A OUT", + "TODDR_A IN 1", "TDMIN_B OUT", + "TODDR_B IN 1", "TDMIN_B OUT", + "TODDR_C IN 1", "TDMIN_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + dai-link-3 { + sound-dai = <&toddr_a>; + }; + + dai-link-4 { + sound-dai = <&toddr_b>; + }; + + dai-link-5 { + sound-dai = <&toddr_c>; + }; + + /* internal speaker interface */ + dai-link-6 { + sound-dai = <&tdmif_a>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&mono_dac>; + }; + + codec-1 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; + }; + }; + + /* 8ch hdmi interface */ + dai-link-7 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* internal digital mics */ + dai-link-8 { + sound-dai = <&pdm>; + + codec { + sound-dai = <&dmics>; + }; + }; + + /* hdmi glue */ + dai-link-9 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; + wifi32k: wifi32k { compatible = "pwm-clock"; #clock-cells = <0>; @@ -187,6 +318,10 @@ }; }; +&arb { + status = "okay"; +}; + &cec_AO { pinctrl-0 = <&cec_ao_a_h_pins>; pinctrl-names = "default"; @@ -201,6 +336,10 @@ hdmi-phandle = <&hdmi_tx>; }; +&clkc_audio { + status = "okay"; +}; + &cpu0 { cpu-supply = <&vddcpu>; operating-points-v2 = <&cpu_opp_table>; @@ -235,6 +374,18 @@ phy-mode = "rmii"; }; +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; @@ -259,6 +410,12 @@ pinctrl-names = "default"; }; +&pdm { + pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_dclk_z_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &pwm_AO_ab { status = "okay"; pinctrl-0 = <&pwm_ao_a_pins>; @@ -305,6 +462,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; @@ -353,6 +513,54 @@ vqmmc-supply = <&emmc_1v8>; }; +&tdmif_a { + pinctrl-0 = <&tdm_a_dout0_pins>, <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>; + pinctrl-names = "default"; + status = "okay"; + + assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD0>, + <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD0>; + assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_A_SCLK>, + <&clkc_audio AUD_CLKID_MST_A_LRCLK>; + assigned-clock-rates = <0>, <0>; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmin_a { + status = "okay"; +}; + +&tdmin_b { + status = "okay"; +}; + +&tdmout_a { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&toddr_a { + status = "okay"; +}; + +&toddr_b { + status = "okay"; +}; + +&toddr_c { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + &uart_A { status = "okay"; pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi index 521573f3a5ba..7894a5458dbc 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi @@ -5,11 +5,47 @@ */ #include "meson-g12-common.dtsi" +#include <dt-bindings/clock/axg-audio-clkc.h> #include <dt-bindings/power/meson-sm1-power.h> +#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h> +#include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h> / { compatible = "amlogic,sm1"; + tdmif_a: audio-controller-0 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_A"; + clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, + <&clkc_audio AUD_CLKID_MST_A_SCLK>, + <&clkc_audio AUD_CLKID_MST_A_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + tdmif_b: audio-controller-1 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_B"; + clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, + <&clkc_audio AUD_CLKID_MST_B_SCLK>, + <&clkc_audio AUD_CLKID_MST_B_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + tdmif_c: audio-controller-2 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_C"; + clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, + <&clkc_audio AUD_CLKID_MST_C_SCLK>, + <&clkc_audio AUD_CLKID_MST_C_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + cpus { #address-cells = <0x2>; #size-cells = <0x0>; @@ -117,6 +153,297 @@ }; }; +&apb { + audio: bus@60000 { + compatible = "simple-bus"; + reg = <0x0 0x60000 0x0 0x1000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x60000 0x0 0x1000>; + + clkc_audio: clock-controller@0 { + status = "disabled"; + compatible = "amlogic,sm1-audio-clkc"; + reg = <0x0 0x0 0x0 0xb4>; + #clock-cells = <1>; + #reset-cells = <1>; + + clocks = <&clkc CLKID_AUDIO>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL3>, + <&clkc CLKID_HIFI_PLL>, + <&clkc CLKID_FCLK_DIV3>, + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_FCLK_DIV5>; + clock-names = "pclk", + "mst_in0", + "mst_in1", + "mst_in2", + "mst_in3", + "mst_in4", + "mst_in5", + "mst_in6", + "mst_in7"; + + resets = <&reset RESET_AUDIO>; + }; + + toddr_a: audio-controller@100 { + compatible = "amlogic,sm1-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x100 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_A"; + interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_A>; + resets = <&arb AXG_ARB_TODDR_A>, + <&clkc_audio AUD_RESET_TODDR_A>; + reset-names = "arb", "rst"; + status = "disabled"; + }; + + toddr_b: audio-controller@140 { + compatible = "amlogic,sm1-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x140 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_B"; + interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_B>; + resets = <&arb AXG_ARB_TODDR_B>, + <&clkc_audio AUD_RESET_TODDR_B>; + reset-names = "arb", "rst"; + status = "disabled"; + }; + + toddr_c: audio-controller@180 { + compatible = "amlogic,sm1-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x180 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_C"; + interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_C>; + resets = <&arb AXG_ARB_TODDR_C>, + <&clkc_audio AUD_RESET_TODDR_C>; + reset-names = "arb", "rst"; + status = "disabled"; + }; + + frddr_a: audio-controller@1c0 { + compatible = "amlogic,sm1-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x1c0 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_A"; + interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; + resets = <&arb AXG_ARB_FRDDR_A>, + <&clkc_audio AUD_RESET_FRDDR_A>; + reset-names = "arb", "rst"; + status = "disabled"; + }; + + frddr_b: audio-controller@200 { + compatible = "amlogic,sm1-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x200 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_B"; + interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; + resets = <&arb AXG_ARB_FRDDR_B>, + <&clkc_audio AUD_RESET_FRDDR_B>; + reset-names = "arb", "rst"; + status = "disabled"; + }; + + frddr_c: audio-controller@240 { + compatible = "amlogic,sm1-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x240 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_C"; + interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; + resets = <&arb AXG_ARB_FRDDR_C>, + <&clkc_audio AUD_RESET_FRDDR_C>; + reset-names = "arb", "rst"; + status = "disabled"; + }; + + arb: reset-controller@280 { + status = "disabled"; + compatible = "amlogic,meson-sm1-audio-arb"; + reg = <0x0 0x280 0x0 0x4>; + #reset-cells = <1>; + clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; + }; + + tdmin_a: audio-controller@300 { + compatible = "amlogic,sm1-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x300 0x0 0x40>; + sound-name-prefix = "TDMIN_A"; + resets = <&clkc_audio AUD_RESET_TDMIN_A>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_b: audio-controller@340 { + compatible = "amlogic,sm1-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x340 0x0 0x40>; + sound-name-prefix = "TDMIN_B"; + resets = <&clkc_audio AUD_RESET_TDMIN_B>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_c: audio-controller@380 { + compatible = "amlogic,sm1-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x380 0x0 0x40>; + sound-name-prefix = "TDMIN_C"; + resets = <&clkc_audio AUD_RESET_TDMIN_C>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_lb: audio-controller@3c0 { + compatible = "amlogic,sm1-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x3c0 0x0 0x40>; + sound-name-prefix = "TDMIN_LB"; + resets = <&clkc_audio AUD_RESET_TDMIN_LB>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_a: audio-controller@500 { + compatible = "amlogic,sm1-tdmout"; + reg = <0x0 0x500 0x0 0x40>; + sound-name-prefix = "TDMOUT_A"; + resets = <&clkc_audio AUD_RESET_TDMOUT_A>; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_b: audio-controller@540 { + compatible = "amlogic,sm1-tdmout"; + reg = <0x0 0x540 0x0 0x40>; + sound-name-prefix = "TDMOUT_B"; + resets = <&clkc_audio AUD_RESET_TDMOUT_B>; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_c: audio-controller@580 { + compatible = "amlogic,sm1-tdmout"; + reg = <0x0 0x580 0x0 0x40>; + sound-name-prefix = "TDMOUT_C"; + resets = <&clkc_audio AUD_RESET_TDMOUT_C>; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tohdmitx: audio-controller@744 { + compatible = "amlogic,sm1-tohdmitx", + "amlogic,g12a-tohdmitx"; + reg = <0x0 0x744 0x0 0x4>; + #sound-dai-cells = <1>; + sound-name-prefix = "TOHDMITX"; + resets = <&clkc_audio AUD_RESET_TOHDMITX>; + status = "disabled"; + }; + + toddr_d: audio-controller@840 { + compatible = "amlogic,sm1-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x840 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_D"; + interrupts = <GIC_SPI 49 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_D>; + resets = <&arb AXG_ARB_TODDR_D>, + <&clkc_audio AUD_RESET_TODDR_D>; + reset-names = "arb", "rst"; + status = "disabled"; + }; + + frddr_d: audio-controller@880 { + compatible = "amlogic,sm1-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x880 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_D"; + interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_D>; + resets = <&arb AXG_ARB_FRDDR_D>, + <&clkc_audio AUD_RESET_FRDDR_D>; + reset-names = "arb", "rst"; + status = "disabled"; + }; + }; + + pdm: audio-controller@61000 { + compatible = "amlogic,sm1-pdm", + "amlogic,axg-pdm"; + reg = <0x0 0x61000 0x0 0x34>; + #sound-dai-cells = <0>; + sound-name-prefix = "PDM"; + clocks = <&clkc_audio AUD_CLKID_PDM>, + <&clkc_audio AUD_CLKID_PDM_DCLK>, + <&clkc_audio AUD_CLKID_PDM_SYSCLK>; + clock-names = "pclk", "dclk", "sysclk"; + status = "disabled"; + }; +}; + &cecb_AO { compatible = "amlogic,meson-sm1-ao-cec"; }; @@ -134,10 +461,27 @@ power-domains = <&pwrc PWRC_SM1_ETH_ID>; }; +&gpio_intc { + compatible = "amlogic,meson-sm1-gpio-intc", + "amlogic,meson-gpio-intc"; +}; + +&pcie { + power-domains = <&pwrc PWRC_SM1_PCIE_ID>; +}; + &pwrc { compatible = "amlogic,meson-sm1-pwrc"; }; +&simplefb_cvbs { + power-domains = <&pwrc PWRC_SM1_VPU_ID>; +}; + +&simplefb_hdmi { + power-domains = <&pwrc PWRC_SM1_VPU_ID>; +}; + &vpu { power-domains = <&pwrc PWRC_SM1_VPU_ID>; }; diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index 26a039a028b8..1f3c80aafbd7 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -6,7 +6,6 @@ /* * Devices shared by all Juno boards */ - dma-ranges = <0 0 0 0 0x100 0>; memtimer: timer@2a810000 { compatible = "arm,armv7-timer-mem"; @@ -35,6 +34,18 @@ clock-names = "apb_pclk"; }; + smmu_gpu: iommu@2b400000 { + compatible = "arm,mmu-400", "arm,smmu-v1"; + reg = <0x0 0x2b400000 0x0 0x10000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + #global-interrupts = <1>; + power-domains = <&scpi_devpd 1>; + dma-coherent; + status = "disabled"; + }; + smmu_pcie: iommu@2b500000 { compatible = "arm,mmu-401", "arm,smmu-v1"; reg = <0x0 0x2b500000 0x0 0x10000>; @@ -487,6 +498,21 @@ }; }; + gpu: gpu@2d000000 { + compatible = "arm,juno-mali", "arm,mali-t624"; + reg = <0 0x2d000000 0 0x10000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gpu", "job", "mmu"; + clocks = <&scpi_dvfs 2>; + power-domains = <&scpi_devpd 1>; + dma-coherent; + /* The SMMU is only really of interest to bare-metal hypervisors */ + /* iommus = <&smmu_gpu 0>; */ + status = "disabled"; + }; + sram: sram@2e000000 { compatible = "arm,juno-sram-ns", "mmio-sram"; reg = <0x0 0x2e000000 0x0 0x8000>; diff --git a/arch/arm64/boot/dts/arm/juno-clocks.dtsi b/arch/arm64/boot/dts/arm/juno-clocks.dtsi index e5e265dfa902..2870b5eeb198 100644 --- a/arch/arm64/boot/dts/arm/juno-clocks.dtsi +++ b/arch/arm64/boot/dts/arm/juno-clocks.dtsi @@ -8,10 +8,10 @@ */ / { /* SoC fixed clocks */ - soc_uartclk: refclk7273800hz { + soc_uartclk: refclk7372800hz { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <7273800>; + clock-frequency = <7372800>; clock-output-names = "juno:uartclk"; }; diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index d1d31ccad758..cb7de8d99223 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 -dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-a-plus.dtb \ +dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-4-b.dtb \ + bcm2837-rpi-3-a-plus.dtb \ bcm2837-rpi-3-b.dtb \ bcm2837-rpi-3-b-plus.dtb \ bcm2837-rpi-cm3-io3.dtb diff --git a/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts new file mode 100644 index 000000000000..d24c53682e44 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts @@ -0,0 +1,2 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "arm/bcm2711-rpi-4-b.dts" diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index a76f620f7f35..6721966140f4 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -18,8 +18,8 @@ / { compatible = "samsung,exynos5433"; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; interrupt-parent = <&gic>; @@ -249,57 +249,6 @@ }; }; - gpu: gpu@14ac0000 { - compatible = "samsung,exynos5433-mali", "arm,mali-t760"; - reg = <0x14ac0000 0x5000>; - interrupts = <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "job", "mmu", "gpu"; - clocks = <&cmu_g3d CLK_ACLK_G3D>; - clock-names = "core"; - power-domains = <&pd_g3d>; - operating-points-v2 = <&gpu_opp_table>; - status = "disabled"; - - gpu_opp_table: opp_table { - compatible = "operating-points-v2"; - - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; - opp-microvolt = <1000000>; - }; - opp-267000000 { - opp-hz = /bits/ 64 <267000000>; - opp-microvolt = <1000000>; - }; - opp-350000000 { - opp-hz = /bits/ 64 <350000000>; - opp-microvolt = <1025000>; - }; - opp-420000000 { - opp-hz = /bits/ 64 <420000000>; - opp-microvolt = <1025000>; - }; - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <1075000>; - }; - opp-550000000 { - opp-hz = /bits/ 64 <550000000>; - opp-microvolt = <1125000>; - }; - opp-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <1150000>; - }; - opp-700000000 { - opp-hz = /bits/ 64 <700000000>; - opp-microvolt = <1150000>; - }; - }; - }; - psci { compatible = "arm,psci"; method = "smc"; @@ -311,7 +260,7 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x0 0x0 0x0 0x18000000>; chipid@10000000 { compatible = "samsung,exynos4210-chipid"; @@ -754,7 +703,7 @@ status = "disabled"; }; - mct@101c0000 { + timer@101c0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101c0000 0x800>; interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, @@ -1125,6 +1074,57 @@ power-domains = <&pd_gscl>; }; + gpu: gpu@14ac0000 { + compatible = "samsung,exynos5433-mali", "arm,mali-t760"; + reg = <0x14ac0000 0x5000>; + interrupts = <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&cmu_g3d CLK_ACLK_G3D>; + clock-names = "core"; + power-domains = <&pd_g3d>; + operating-points-v2 = <&gpu_opp_table>; + status = "disabled"; + + gpu_opp_table: opp_table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <1000000>; + }; + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-microvolt = <1000000>; + }; + opp-350000000 { + opp-hz = /bits/ 64 <350000000>; + opp-microvolt = <1025000>; + }; + opp-420000000 { + opp-hz = /bits/ 64 <420000000>; + opp-microvolt = <1025000>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1075000>; + }; + opp-550000000 { + opp-hz = /bits/ 64 <550000000>; + opp-microvolt = <1125000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1150000>; + }; + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <1150000>; + }; + }; + }; + scaler_0: scaler@15000000 { compatible = "samsung,exynos5433-scaler"; reg = <0x15000000 0x1294>; @@ -1179,9 +1179,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x13a00000 0x1000>; interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_disp CLK_PCLK_SMMU_DECON0X>, - <&cmu_disp CLK_ACLK_SMMU_DECON0X>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_disp CLK_ACLK_SMMU_DECON0X>, + <&cmu_disp CLK_PCLK_SMMU_DECON0X>; power-domains = <&pd_disp>; #iommu-cells = <0>; }; @@ -1190,9 +1190,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x13a10000 0x1000>; interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_disp CLK_PCLK_SMMU_DECON1X>, - <&cmu_disp CLK_ACLK_SMMU_DECON1X>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_disp CLK_ACLK_SMMU_DECON1X>, + <&cmu_disp CLK_PCLK_SMMU_DECON1X>; #iommu-cells = <0>; power-domains = <&pd_disp>; }; @@ -1201,9 +1201,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x13a20000 0x1000>; interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_disp CLK_PCLK_SMMU_TV0X>, - <&cmu_disp CLK_ACLK_SMMU_TV0X>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_disp CLK_ACLK_SMMU_TV0X>, + <&cmu_disp CLK_PCLK_SMMU_TV0X>; #iommu-cells = <0>; power-domains = <&pd_disp>; }; @@ -1212,9 +1212,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x13a30000 0x1000>; interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_disp CLK_PCLK_SMMU_TV1X>, - <&cmu_disp CLK_ACLK_SMMU_TV1X>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_disp CLK_ACLK_SMMU_TV1X>, + <&cmu_disp CLK_PCLK_SMMU_TV1X>; #iommu-cells = <0>; power-domains = <&pd_disp>; }; @@ -1256,9 +1256,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x15040000 0x1000>; interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_mscl CLK_PCLK_SMMU_M2MSCALER0>, - <&cmu_mscl CLK_ACLK_SMMU_M2MSCALER0>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_mscl CLK_ACLK_SMMU_M2MSCALER0>, + <&cmu_mscl CLK_PCLK_SMMU_M2MSCALER0>; #iommu-cells = <0>; power-domains = <&pd_mscl>; }; @@ -1267,9 +1267,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x15050000 0x1000>; interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_mscl CLK_PCLK_SMMU_M2MSCALER1>, - <&cmu_mscl CLK_ACLK_SMMU_M2MSCALER1>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_mscl CLK_ACLK_SMMU_M2MSCALER1>, + <&cmu_mscl CLK_PCLK_SMMU_M2MSCALER1>; #iommu-cells = <0>; power-domains = <&pd_mscl>; }; @@ -1278,9 +1278,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x15060000 0x1000>; interrupts = <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_mscl CLK_PCLK_SMMU_JPEG>, - <&cmu_mscl CLK_ACLK_SMMU_JPEG>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_mscl CLK_ACLK_SMMU_JPEG>, + <&cmu_mscl CLK_PCLK_SMMU_JPEG>; #iommu-cells = <0>; power-domains = <&pd_mscl>; }; @@ -1289,9 +1289,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x15200000 0x1000>; interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_mfc CLK_PCLK_SMMU_MFC_0>, - <&cmu_mfc CLK_ACLK_SMMU_MFC_0>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_mfc CLK_ACLK_SMMU_MFC_0>, + <&cmu_mfc CLK_PCLK_SMMU_MFC_0>; #iommu-cells = <0>; power-domains = <&pd_mfc>; }; @@ -1300,9 +1300,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x15210000 0x1000>; interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_mfc CLK_PCLK_SMMU_MFC_1>, - <&cmu_mfc CLK_ACLK_SMMU_MFC_1>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_mfc CLK_ACLK_SMMU_MFC_1>, + <&cmu_mfc CLK_PCLK_SMMU_MFC_1>; #iommu-cells = <0>; power-domains = <&pd_mfc>; }; @@ -1452,7 +1452,7 @@ i2s1: i2s@14d60000 { compatible = "samsung,exynos7-i2s"; reg = <0x14d60000 0x100>; - dmas = <&pdma0 31 &pdma0 30>; + dmas = <&pdma0 31>, <&pdma0 30>; dma-names = "tx", "rx"; interrupts = <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu_peric CLK_PCLK_I2S1>, @@ -1811,7 +1811,7 @@ i2s0: i2s@11440000 { compatible = "samsung,exynos7-i2s"; reg = <0x11440000 0x100>; - dmas = <&adma 0 &adma 2>; + dmas = <&adma 0>, <&adma 2>; dma-names = "tx", "rx"; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index bcb9d8cee267..3a00ef0a17ff 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -12,8 +12,8 @@ / { compatible = "samsung,exynos7"; interrupt-parent = <&gic>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; aliases { pinctrl0 = &pinctrl_alive; @@ -78,17 +78,6 @@ }; }; - gpu: gpu@14ac0000 { - compatible = "samsung,exynos5433-mali", "arm,mali-t760"; - reg = <0x14ac0000 0x5000>; - interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "job", "mmu", "gpu"; - status = "disabled"; - /* TODO: operating points for DVFS, cooling device */ - }; - psci { compatible = "arm,psci-0.2"; method = "smc"; @@ -98,7 +87,7 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0 0 0 0x18000000>; chipid@10000000 { compatible = "samsung,exynos4210-chipid"; @@ -523,6 +512,17 @@ status = "disabled"; }; + gpu: gpu@14ac0000 { + compatible = "samsung,exynos5433-mali", "arm,mali-t760"; + reg = <0x14ac0000 0x5000>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + status = "disabled"; + /* TODO: operating points for DVFS, cooling device */ + }; + mmc_0: mmc@15740000 { compatible = "samsung,exynos7-dw-mshc-smu"; interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 93fce8f0c66d..38e344a2f0ff 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -22,6 +22,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb @@ -31,4 +32,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb + +dtb-$(CONFIG_ARCH_S32) += s32v234-evb.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts index 078a5010228c..5b9d4b35dd35 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts @@ -194,8 +194,6 @@ }; fpga@66 { - #address-cells = <1>; - #size-cells = <0>; compatible = "fsl,ls1028aqds-fpga", "fsl,fpga-qixis-i2c", "simple-mfd"; reg = <0x66>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts index 1a69221d9a1b..9720a190049f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts @@ -184,3 +184,7 @@ &sata { status = "okay"; }; + +&usb1 { + dr_mode = "otg"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 72b9a75976a1..8e8a77eb596a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -82,22 +82,8 @@ dpclk: clock-controller@f1f0000 { compatible = "fsl,ls1028a-plldig"; reg = <0x0 0xf1f0000 0x0 0xffff>; - #clock-cells = <1>; - clocks = <&osc_27m>; - }; - - aclk: clock-axi { - compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <650000000>; - clock-output-names= "aclk"; - }; - - pclk: clock-apb { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <650000000>; - clock-output-names= "pclk"; + clocks = <&osc_27m>; }; reboot { @@ -142,6 +128,37 @@ }; }; + thermal-zones { + core-cluster { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 0>; + + trips { + core_cluster_alert: core-cluster-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + core_cluster_crit: core-cluster-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&core_cluster_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + soc: soc { compatible = "simple-bus"; #address-cells = <2>; @@ -542,7 +559,7 @@ status = "disabled"; }; - tmu: tmu@1f00000 { + tmu: tmu@1f80000 { compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f80000 0x0 0x10000>; interrupts = <0 23 0x4>; @@ -594,37 +611,6 @@ #thermal-sensor-cells = <1>; }; - thermal-zones { - core-cluster { - polling-delay-passive = <1000>; - polling-delay = <5000>; - thermal-sensors = <&tmu 0>; - - trips { - core_cluster_alert: core-cluster-alert { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - - core_cluster_crit: core-cluster-crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&core_cluster_alert>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - }; - pcie@1f0000000 { /* Integrated Endpoint Root Complex */ compatible = "pci-host-ecam-generic"; reg = <0x01 0xf0000000 0x0 0x100000>; @@ -679,7 +665,8 @@ interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, <0 223 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "DE", "SE"; - clocks = <&dpclk 0>, <&aclk>, <&aclk>, <&pclk>; + clocks = <&dpclk>, <&clockgen 2 2>, <&clockgen 2 2>, + <&clockgen 2 2>; clock-names = "pxlclk", "mclk", "aclk", "pclk"; arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; arm,malidp-arqos-value = <0xd000d000>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts index 6a6514d0e5a9..0c742befb761 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts @@ -122,6 +122,10 @@ }; }; +&usb1 { + dr_mode = "otg"; +}; + #include "fsl-ls1046-post.dtsi" &fman0 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts index 8e925df6c01c..90b198939251 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts @@ -95,5 +95,6 @@ }; &usb1 { + dr_mode = "otg"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index b032f3890c8c..e883fe0fc1b7 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> /memreserve/ 0x80000000 0x00010000; @@ -20,7 +21,7 @@ #size-cells = <0>; // 8 clusters having 2 Cortex-A72 cores each - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -34,9 +35,10 @@ i-cache-sets = <192>; next-level-cache = <&cluster0_l2>; cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -50,9 +52,10 @@ i-cache-sets = <192>; next-level-cache = <&cluster0_l2>; cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@100 { + cpu100: cpu@100 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -66,9 +69,10 @@ i-cache-sets = <192>; next-level-cache = <&cluster1_l2>; cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@101 { + cpu101: cpu@101 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -82,9 +86,10 @@ i-cache-sets = <192>; next-level-cache = <&cluster1_l2>; cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@200 { + cpu200: cpu@200 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -98,9 +103,10 @@ i-cache-sets = <192>; next-level-cache = <&cluster2_l2>; cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@201 { + cpu201: cpu@201 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -114,9 +120,10 @@ i-cache-sets = <192>; next-level-cache = <&cluster2_l2>; cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@300 { + cpu300: cpu@300 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -130,9 +137,10 @@ i-cache-sets = <192>; next-level-cache = <&cluster3_l2>; cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@301 { + cpu301: cpu@301 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -146,9 +154,10 @@ i-cache-sets = <192>; next-level-cache = <&cluster3_l2>; cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@400 { + cpu400: cpu@400 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -162,9 +171,10 @@ i-cache-sets = <192>; next-level-cache = <&cluster4_l2>; cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@401 { + cpu401: cpu@401 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -178,9 +188,10 @@ i-cache-sets = <192>; next-level-cache = <&cluster4_l2>; cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@500 { + cpu500: cpu@500 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -194,9 +205,10 @@ i-cache-sets = <192>; next-level-cache = <&cluster5_l2>; cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@501 { + cpu501: cpu@501 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -210,9 +222,10 @@ i-cache-sets = <192>; next-level-cache = <&cluster5_l2>; cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@600 { + cpu600: cpu@600 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -226,9 +239,10 @@ i-cache-sets = <192>; next-level-cache = <&cluster6_l2>; cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@601 { + cpu601: cpu@601 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -242,9 +256,10 @@ i-cache-sets = <192>; next-level-cache = <&cluster6_l2>; cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@700 { + cpu700: cpu@700 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -258,9 +273,10 @@ i-cache-sets = <192>; next-level-cache = <&cluster7_l2>; cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@701 { + cpu701: cpu@701 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -274,6 +290,7 @@ i-cache-sets = <192>; next-level-cache = <&cluster7_l2>; cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; cluster0_l2: l2-cache0 { @@ -418,6 +435,51 @@ clock-output-names = "sysclk"; }; + thermal-zones { + core_thermal1: core-thermal1 { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 0>; + + trips { + core_cluster_alert: core-cluster-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + core_cluster_crit: core-cluster-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&core_cluster_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu200 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu201 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu300 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu301 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu400 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu401 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu500 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu501 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu600 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu601 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu700 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu701 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -478,6 +540,20 @@ little-endian; }; + tmu: tmu@1f80000 { + compatible = "fsl,qoriq-tmu"; + reg = <0x0 0x1f80000 0x0 0x10000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + fsl,tmu-range = <0x800000e6 0x8001017d>; + fsl,tmu-calibration = + /* Calibration data group 1 */ + <0x00000000 0x00000035 + /* Calibration data group 2 */ + 0x00010001 0x00000154>; + little-endian; + #thermal-sensor-cells = <1>; + }; + i2c0: i2c@2000000 { compatible = "fsl,vf610-i2c"; #address-cells = <1>; @@ -586,6 +662,7 @@ reg = <0x0 0x2140000 0x0 0x10000>; interrupts = <0 28 0x4>; /* Level high type */ clocks = <&clockgen 4 1>; + dma-coherent; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; little-endian; @@ -598,6 +675,7 @@ reg = <0x0 0x2150000 0x0 0x10000>; interrupts = <0 63 0x4>; /* Level high type */ clocks = <&clockgen 4 1>; + dma-coherent; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; broken-cd; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts index f7a15f3904c2..28ab17a277bb 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts @@ -62,6 +62,8 @@ cpudai: simple-audio-card,cpu { sound-dai = <&sai3>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <32>; }; simple-audio-card,codec { @@ -94,68 +96,6 @@ }; }; -&sai3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sai3>; - assigned-clocks = <&clk IMX8MM_CLK_SAI3>; - assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; - assigned-clock-rates = <24576000>; - status = "okay"; -}; - -&snvs_pwrkey { - status = "okay"; -}; - -&uart2 { /* console */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&usbotg1 { - dr_mode = "otg"; - hnp-disable; - srp-disable; - adp-disable; - usb-role-switch; - status = "okay"; - - port { - usb1_drd_sw: endpoint { - remote-endpoint = <&typec1_dr_sw>; - }; - }; -}; - -&usdhc2 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; - cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - bus-width = <4>; - vmmc-supply = <®_usdhc2_vmmc>; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc3>; - pinctrl-1 = <&pinctrl_usdhc3_100mhz>; - pinctrl-2 = <&pinctrl_usdhc3_200mhz>; - bus-width = <8>; - non-removable; - status = "okay"; -}; - -&wdog1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdog>; - fsl,ext-reset-output; - status = "okay"; -}; - &i2c1 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -306,6 +246,86 @@ }; }; +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + pca6416: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MM_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart2 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + usb-role-switch; + status = "okay"; + + port { + usb1_drd_sw: endpoint { + remote-endpoint = <&typec1_dr_sw>; + }; + }; +}; + +&usdhc2 { + assigned-clocks = <&clk IMX8MM_CLK_USDHC2>; + assigned-clock-rates = <200000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&usdhc3 { + assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + &iomuxc { pinctrl-names = "default"; @@ -355,6 +375,13 @@ >; }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + pinctrl_pmic: pmicirq { fsl,pins = < MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index 23c8fad7932b..6edbdfe2d0d7 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -12,7 +12,6 @@ #include "imx8mm-pinfunc.h" / { - compatible = "fsl,imx8mm"; interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; @@ -426,7 +425,7 @@ }; ocotp: ocotp-ctrl@30350000 { - compatible = "fsl,imx8mm-ocotp", "fsl,imx7d-ocotp", "syscon"; + compatible = "fsl,imx8mm-ocotp", "syscon"; reg = <0x30350000 0x10000>; clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>; /* For nvmem subnodes */ @@ -479,14 +478,18 @@ <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_IPG_AUDIO_ROOT>, <&clk IMX8MM_SYS_PLL3>, - <&clk IMX8MM_VIDEO_PLL1>; + <&clk IMX8MM_VIDEO_PLL1>, + <&clk IMX8MM_AUDIO_PLL1>, + <&clk IMX8MM_AUDIO_PLL2>; assigned-clock-parents = <&clk IMX8MM_SYS_PLL3_OUT>, <&clk IMX8MM_SYS_PLL1_800M>; assigned-clock-rates = <0>, <400000000>, <400000000>, <750000000>, - <594000000>; + <594000000>, + <393216000>, + <361267200>; }; src: reset-controller@30390000 { @@ -698,8 +701,6 @@ <&clk IMX8MM_CLK_NAND_USDHC_BUS>, <&clk IMX8MM_CLK_USDHC1_ROOT>; clock-names = "ipg", "ahb", "per"; - assigned-clocks = <&clk IMX8MM_CLK_USDHC1>; - assigned-clock-rates = <400000000>; fsl,tuning-start-tap = <20>; fsl,tuning-step= <2>; bus-width = <4>; @@ -728,8 +729,6 @@ <&clk IMX8MM_CLK_NAND_USDHC_BUS>, <&clk IMX8MM_CLK_USDHC3_ROOT>; clock-names = "ipg", "ahb", "per"; - assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>; - assigned-clock-rates = <400000000>; fsl,tuning-start-tap = <20>; fsl,tuning-step= <2>; bus-width = <4>; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts index 11c705d225d0..071949412caf 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts @@ -6,205 +6,18 @@ /dts-v1/; #include "imx8mn.dtsi" +#include "imx8mn-evk.dtsi" / { model = "NXP i.MX8MNano DDR4 EVK board"; compatible = "fsl,imx8mn-ddr4-evk", "fsl,imx8mn"; - - chosen { - stdout-path = &uart2; - }; - - reg_usdhc2_vmmc: regulator-usdhc2 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; - regulator-name = "VSD_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; }; &A53_0 { cpu-supply = <&buck2_reg>; }; -&iomuxc { - pinctrl-names = "default"; - - pinctrl_fec1: fec1grp { - fsl,pins = < - MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3 - MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 - MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f - MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f - MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f - MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f - MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 - MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 - MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 - MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 - MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f - MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 - MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 - MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f - MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 - MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 - >; - }; - - pinctrl_pmic: pmicirq { - fsl,pins = < - MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 - >; - }; - - pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc { - fsl,pins = < - MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 - MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 - >; - }; - - pinctrl_usdhc2_gpio: usdhc2grpgpio { - fsl,pins = < - MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 - MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 - MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 - MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 - MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 - MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 - MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 - >; - }; - - pinctrl_usdhc2_100mhz: usdhc2grp100mhz { - fsl,pins = < - MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 - MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 - MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 - MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 - MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 - MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 - MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 - >; - }; - - pinctrl_usdhc2_200mhz: usdhc2grp200mhz { - fsl,pins = < - MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 - MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 - MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 - MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 - MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 - MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 - MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 - >; - }; - - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000190 - MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 - MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 - MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 - MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 - MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 - MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 - MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 - MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 - MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 - MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 - >; - }; - - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { - fsl,pins = < - MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000194 - MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 - MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 - MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 - MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 - MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 - MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 - MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 - MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 - MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 - MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 - >; - }; - - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { - fsl,pins = < - MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000196 - MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 - MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 - MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 - MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 - MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 - MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 - MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 - MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 - MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 - MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 - >; - }; - - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 - >; - }; -}; - -&fec1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec1>; - phy-mode = "rgmii-id"; - phy-handle = <ðphy0>; - fsl,magic-packet; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy0: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - at803x,led-act-blind-workaround; - at803x,eee-disabled; - at803x,vddio-1p8v; - }; - }; -}; - &i2c1 { - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; - pmic@4b { compatible = "rohm,bd71847"; reg = <0x4b>; @@ -309,40 +122,10 @@ }; }; -&snvs_pwrkey { - status = "okay"; -}; - -&uart2 { /* console */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; - cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - bus-width = <4>; - vmmc-supply = <®_usdhc2_vmmc>; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc3>; - pinctrl-1 = <&pinctrl_usdhc3_100mhz>; - pinctrl-2 = <&pinctrl_usdhc3_200mhz>; - bus-width = <8>; - non-removable; - status = "okay"; -}; - -&wdog1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdog>; - fsl,ext-reset-output; - status = "okay"; +&iomuxc { + pinctrl_pmic: pmicirq { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 + >; + }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts new file mode 100644 index 000000000000..61f351958618 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 NXP + */ + +/dts-v1/; + +#include "imx8mn.dtsi" +#include "imx8mn-evk.dtsi" + +/ { + model = "NXP i.MX8MNano EVK board"; + compatible = "fsl,imx8mn-evk", "fsl,imx8mn"; +}; + +&A53_0 { + /delete-property/operating-points-v2; +}; + +&A53_1 { + /delete-property/operating-points-v2; +}; + +&A53_2 { + /delete-property/operating-points-v2; +}; + +&A53_3 { + /delete-property/operating-points-v2; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi new file mode 100644 index 000000000000..2a74330aee8c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi @@ -0,0 +1,249 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 NXP + */ + +#include "imx8mn.dtsi" + +/ { + chosen { + stdout-path = &uart2; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + status { + label = "yellow:status"; + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart2 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usdhc2 { + assigned-clocks = <&clk IMX8MN_CLK_USDHC2>; + assigned-clock-rates = <200000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&usdhc3 { + assigned-clocks = <&clk IMX8MN_CLK_USDHC3_ROOT>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19 + >; + }; + + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < + MX8MN_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc { + fsl,pins = < + MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2grpgpio { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000190 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000194 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000196 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index 43c4db312146..e91625063f8e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -11,7 +11,6 @@ #include "imx8mn-pinfunc.h" / { - compatible = "fsl,imx8mn"; interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; @@ -43,6 +42,19 @@ #address-cells = <1>; #size-cells = <0>; + idle-states { + entry-method = "psci"; + + cpu_pd_wait: cpu-pd-wait { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010033>; + local-timer-stop; + entry-latency-us = <1000>; + exit-latency-us = <700>; + min-residency-us = <2700>; + }; + }; + A53_0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53"; @@ -54,6 +66,7 @@ operating-points-v2 = <&a53_opp_table>; nvmem-cells = <&cpu_speed_grade>; nvmem-cell-names = "speed_grade"; + cpu-idle-states = <&cpu_pd_wait>; }; A53_1: cpu@1 { @@ -65,6 +78,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; + cpu-idle-states = <&cpu_pd_wait>; }; A53_2: cpu@2 { @@ -76,6 +90,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; + cpu-idle-states = <&cpu_pd_wait>; }; A53_3: cpu@3 { @@ -87,6 +102,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; + cpu-idle-states = <&cpu_pd_wait>; }; A53_L2: l2-cache0 { @@ -320,7 +336,7 @@ }; ocotp: ocotp-ctrl@30350000 { - compatible = "fsl,imx8mn-ocotp", "fsl,imx7d-ocotp", "syscon"; + compatible = "fsl,imx8mn-ocotp", "fsl,imx8mm-ocotp", "syscon"; reg = <0x30350000 0x10000>; clocks = <&clk IMX8MN_CLK_OCOTP_ROOT>; #address-cells = <1>; @@ -371,7 +387,7 @@ }; src: reset-controller@30390000 { - compatible = "fsl,imx8mn-src", "syscon"; + compatible = "fsl,imx8mn-src", "fsl,imx8mq-src", "syscon"; reg = <0x30390000 0x10000>; interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; #reset-cells = <1>; @@ -428,6 +444,14 @@ #pwm-cells = <2>; status = "disabled"; }; + + system_counter: timer@306a0000 { + compatible = "nxp,sysctr-timer"; + reg = <0x306a0000 0x20000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc_24m>; + clock-names = "per"; + }; }; aips3: bus@30800000 { @@ -573,8 +597,6 @@ <&clk IMX8MN_CLK_NAND_USDHC_BUS>, <&clk IMX8MN_CLK_USDHC1_ROOT>; clock-names = "ipg", "ahb", "per"; - assigned-clocks = <&clk IMX8MN_CLK_USDHC1>; - assigned-clock-rates = <400000000>; fsl,tuning-start-tap = <20>; fsl,tuning-step= <2>; bus-width = <4>; @@ -603,8 +625,6 @@ <&clk IMX8MN_CLK_NAND_USDHC_BUS>, <&clk IMX8MN_CLK_USDHC3_ROOT>; clock-names = "ipg", "ahb", "per"; - assigned-clocks = <&clk IMX8MN_CLK_USDHC3_ROOT>; - assigned-clock-rates = <400000000>; fsl,tuning-start-tap = <20>; fsl,tuning-step= <2>; bus-width = <4>; @@ -738,6 +758,12 @@ interrupt-controller; interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; + + ddr-pmu@3d800000 { + compatible = "fsl,imx8mn-ddr-pmu", "fsl,imx8m-ddr-pmu"; + reg = <0x3d800000 0x400000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + }; }; usbphynop1: usbphynop1 { diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index 05958124f173..c36685916683 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -48,6 +48,15 @@ gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; states = <1000000 0x0 900000 0x1>; + regulator-boot-on; + regulator-always-on; + }; + + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ir>; }; wm8524: audio-codec { @@ -115,15 +124,6 @@ }; }; -&sai2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sai2>; - assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1_BYPASS>, <&clk IMX8MQ_CLK_SAI2>; - assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL1_OUT>; - assigned-clock-rates = <0>, <24576000>; - status = "okay"; -}; - &gpio5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wifi_reset>; @@ -242,6 +242,29 @@ power-supply = <&sw1a_reg>; }; +&qspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + status = "okay"; + + n25q256a: flash@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q256a", "jedec,spi-nor"; + spi-max-frequency = <29000000>; + }; +}; + +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1_BYPASS>, <&clk IMX8MQ_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL1_OUT>; + assigned-clock-rates = <0>, <24576000>; + status = "okay"; +}; + &snvs_pwrkey { status = "okay"; }; @@ -261,21 +284,9 @@ status = "okay"; }; -&qspi0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_qspi>; - status = "okay"; - - n25q256a: flash@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - compatible = "micron,n25q256a", "jedec,spi-nor"; - spi-max-frequency = <29000000>; - }; -}; - &usdhc1 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; + assigned-clock-rates = <400000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1_100mhz>; @@ -289,6 +300,8 @@ }; &usdhc2 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; + assigned-clock-rates = <200000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>; pinctrl-1 = <&pinctrl_usdhc2_100mhz>; @@ -340,6 +353,12 @@ >; }; + pinctrl_ir: irgrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x4f + >; + }; + pinctrl_pcie0: pcie0grp { fsl,pins = < MX8MQ_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B 0x76 diff --git a/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts b/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts index f52e872ac96f..b8cb20c01a79 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts @@ -110,6 +110,8 @@ }; &usdhc2 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; + assigned-clock-rates = <200000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts index 683a11035643..2a759dff9f87 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts @@ -780,6 +780,8 @@ }; &usdhc1 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; + assigned-clock-rates = <400000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1_100mhz>; @@ -790,6 +792,8 @@ }; &usdhc2 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; + assigned-clock-rates = <200000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>; pinctrl-1 = <&pinctrl_usdhc2_100mhz>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts index c832bf0fcc60..81d269296610 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts @@ -191,6 +191,8 @@ }; &usdhc1 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; + assigned-clock-rates = <400000000>; bus-width = <8>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts b/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts index 8a4aee2348ee..59da96b7143f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts @@ -207,6 +207,8 @@ }; &usdhc1 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; + assigned-clock-rates = <400000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1_100mhz>; @@ -217,6 +219,8 @@ }; &usdhc2 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; + assigned-clock-rates = <200000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi index d7f03c65832b..3dc44114da0e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi @@ -170,6 +170,8 @@ }; &usdhc1 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; + assigned-clock-rates = <400000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1_100mhz>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi index 32ce14936b01..6a55165bd76a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi @@ -62,7 +62,16 @@ reg_3p3_main: regulator-3p3-main { compatible = "regulator-fixed"; vin-supply = <®_12p0_main>; - regulator-name = "3V3V_MAIN"; + regulator-name = "3V3_MAIN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_gen_3p3: regulator-gen-3p3 { + compatible = "regulator-fixed"; + vin-supply = <®_3p3_main>; + regulator-name = "GEN_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; @@ -72,7 +81,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_usdhc2>; compatible = "regulator-fixed"; - vin-supply = <®_3p3_main>; + vin-supply = <®_gen_3p3>; regulator-name = "3V3_SD"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -253,6 +262,18 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + accelerometer@1c { + compatible = "fsl,mma8451"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_accel>; + reg = <0x1c>; + interrupt-parent = <&gpio3>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "INT2"; + vdd-supply = <®_gen_3p3>; + vddio-supply = <®_gen_3p3>; + }; + ucs1002: charger@32 { compatible = "microchip,ucs1002"; pinctrl-names = "default"; @@ -379,6 +400,11 @@ reg = <0x2c>; reset-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; }; + + watchdog@38 { + compatible = "zii,rave-wdt"; + reg = <0x38>; + }; }; &i2c4 { @@ -486,6 +512,8 @@ }; &usdhc1 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; + assigned-clock-rates = <400000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1_100mhz>; @@ -499,6 +527,8 @@ }; &usdhc2 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; + assigned-clock-rates = <200000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>; pinctrl-1 = <&pinctrl_usdhc2_100mhz>; @@ -513,6 +543,12 @@ }; &iomuxc { + pinctrl_accel: accelgrp { + fsl,pins = < + MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0x41 + >; + }; + pinctrl_fec1: fec1grp { fsl,pins = < MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 55a3d1c4bdf0..7f9319452b58 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -235,12 +235,26 @@ thermal-sensors = <&tmu 1>; trips { + gpu_alert: gpu-alert { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + gpu-crit { temperature = <90000>; hysteresis = <2000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&gpu_alert>; + cooling-device = + <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; vpu-thermal { @@ -854,8 +868,6 @@ <&clk IMX8MQ_CLK_NAND_USDHC_BUS>, <&clk IMX8MQ_CLK_USDHC1_ROOT>; clock-names = "ipg", "ahb", "per"; - assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; - assigned-clock-rates = <400000000>; fsl,tuning-start-tap = <20>; fsl,tuning-step = <2>; bus-width = <4>; @@ -949,6 +961,7 @@ <&clk IMX8MQ_CLK_GPU_AXI>, <&clk IMX8MQ_CLK_GPU_AHB>; clock-names = "core", "shader", "bus", "reg"; + #cooling-cells = <2>; assigned-clocks = <&clk IMX8MQ_CLK_GPU_CORE_SRC>, <&clk IMX8MQ_CLK_GPU_SHADER_SRC>, <&clk IMX8MQ_CLK_GPU_AXI>, diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts index 91eef9754101..a3f8cf195974 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts @@ -133,6 +133,8 @@ &usdhc1 { #address-cells = <1>; #size-cells = <0>; + assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>; + assigned-clock-rates = <200000000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; bus-width = <4>; @@ -149,6 +151,8 @@ /* SD */ &usdhc2 { + assigned-clocks = <&clk IMX_CONN_SDHC1_CLK>; + assigned-clock-rates = <200000000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <4>; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts new file mode 100644 index 000000000000..6b21a295c126 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright 2019 Toradex + */ + +/dts-v1/; + +#include "imx8qxp-colibri.dtsi" +#include "imx8qxp-colibri-eval-v3.dtsi" + +/ { + model = "Toradex Colibri iMX8QXP/DX on Colibri Evaluation Board V3"; + compatible = "toradex,colibri-imx8x-eval-v3", + "toradex,colibri-imx8x", "fsl,imx8qxp"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi new file mode 100644 index 000000000000..c7336f387605 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright 2019 Toradex + */ + +#include "dt-bindings/input/linux-event-codes.h" + +/ { + aliases { + rtc0 = &rtc_i2c; + rtc1 = &rtc; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + + wakeup { + label = "Wake-Up"; + gpios = <&lsio_gpio3 10 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; +}; + +&adma_i2c1 { + status = "okay"; + + /* M41T0M6 real time clock on carrier board */ + rtc_i2c: rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; +}; + +/* Colibri UART_B */ +&adma_lpuart0 { + status= "okay"; +}; + +/* Colibri UART_C */ +&adma_lpuart2 { + status= "okay"; +}; + +/* Colibri UART_A */ +&adma_lpuart3 { + status= "okay"; +}; + +/* Colibri FastEthernet */ +&fec1 { + status = "okay"; +}; + +/* Colibri SD/MMC Card */ +&usdhc2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi new file mode 100644 index 000000000000..75f17a29f81e --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi @@ -0,0 +1,598 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright 2019 Toradex + */ + +#include "imx8qxp.dtsi" + +/ { + model = "Toradex Colibri iMX8QXP/DX Module"; + compatible = "toradex,colibri-imx8x", "fsl,imx8qxp"; + + chosen { + stdout-path = &adma_lpuart3; + }; + + reg_module_3v3: regulator-module-3v3 { + compatible = "regulator-fixed"; + regulator-name = "+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +/* On-module I2C */ +&adma_i2c0 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>, <&pinctrl_sgtl5000_usb_clk>; + status = "okay"; + + /* Touch controller */ + touchscreen@2c { + compatible = "adi,ad7879-1"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ad7879_int>; + reg = <0x2c>; + interrupt-parent = <&lsio_gpio3>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + touchscreen-max-pressure = <4096>; + adi,resistance-plate-x = <120>; + adi,first-conversion-delay = /bits/ 8 <3>; + adi,acquisition-time = /bits/ 8 <1>; + adi,median-filter-size = /bits/ 8 <2>; + adi,averaging = /bits/ 8 <1>; + adi,conversion-interval = /bits/ 8 <255>; + }; +}; + +/* Colibri I2C */ +&adma_i2c1 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; +}; + +/* Colibri UART_B */ +&adma_lpuart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart0>; +}; + +/* Colibri UART_C */ +&adma_lpuart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart2>; +}; + +/* Colibri UART_A */ +&adma_lpuart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart3>, <&pinctrl_lpuart3_ctrl>; +}; + +/* Colibri FastEthernet */ +&fec1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_fec1>; + pinctrl-1 = <&pinctrl_fec1_sleep>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + fsl,magic-packet; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c22"; + max-speed = <100>; + reg = <2>; + }; + }; +}; + +/* On-module eMMC */ +&usdhc1 { + bus-width = <8>; + non-removable; + no-sd; + no-sdio; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + status = "okay"; +}; + +/* Colibri SD/MMC Card */ +&usdhc2 { + bus-width = <4>; + cd-gpios = <&lsio_gpio3 9 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_module_3v3>; + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>; + disable-wp; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ext_io0>, <&pinctrl_hog0>, <&pinctrl_hog1>; + + /* On-module touch pen-down interrupt */ + pinctrl_ad7879_int: ad7879intgrp { + fsl,pins = < + IMX8QXP_MIPI_CSI0_I2C0_SCL_LSIO_GPIO3_IO05 0x21 + >; + }; + + /* Colibri Analogue Inputs */ + pinctrl_adc0: adc0grp { + fsl,pins = < + IMX8QXP_ADC_IN0_ADMA_ADC_IN0 0x60 /* SODIMM 8 */ + IMX8QXP_ADC_IN1_ADMA_ADC_IN1 0x60 /* SODIMM 6 */ + IMX8QXP_ADC_IN4_ADMA_ADC_IN4 0x60 /* SODIMM 4 */ + IMX8QXP_ADC_IN5_ADMA_ADC_IN5 0x60 /* SODIMM 2 */ + >; + }; + + pinctrl_can_int: canintgrp { + fsl,pins = < + IMX8QXP_QSPI0A_DQS_LSIO_GPIO3_IO13 0x40 /* SODIMM 73 */ + >; + }; + + pinctrl_csi_ctl: csictlgrp { + fsl,pins = < + IMX8QXP_QSPI0A_SS0_B_LSIO_GPIO3_IO14 0x20 /* SODIMM 77 */ + IMX8QXP_QSPI0A_SS1_B_LSIO_GPIO3_IO15 0x20 /* SODIMM 89 */ + >; + }; + + pinctrl_ext_io0: extio0grp { + fsl,pins = < + IMX8QXP_ENET0_RGMII_RXD3_LSIO_GPIO5_IO08 0x06000040 /* SODIMM 135 */ + >; + }; + + /* Colibri Ethernet: On-module 100Mbps PHY Micrel KSZ8041 */ + pinctrl_fec1: fec1grp { + fsl,pins = < + IMX8QXP_ENET0_MDC_CONN_ENET0_MDC 0x06000020 + IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020 + IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x61 + IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RCLK50M_OUT 0x06000061 + IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x61 + IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x61 + IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x61 + IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x61 + IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x61 + IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RMII_RX_ER 0x61 + >; + }; + + pinctrl_fec1_sleep: fec1slpgrp { + fsl,pins = < + IMX8QXP_ENET0_MDC_LSIO_GPIO5_IO11 0x06000041 + IMX8QXP_ENET0_MDIO_LSIO_GPIO5_IO10 0x06000041 + IMX8QXP_ENET0_RGMII_TX_CTL_LSIO_GPIO4_IO30 0x41 + IMX8QXP_ENET0_RGMII_TXC_LSIO_GPIO4_IO29 0x41 + IMX8QXP_ENET0_RGMII_TXD0_LSIO_GPIO4_IO31 0x41 + IMX8QXP_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00 0x41 + IMX8QXP_ENET0_RGMII_RX_CTL_LSIO_GPIO5_IO04 0x41 + IMX8QXP_ENET0_RGMII_RXD0_LSIO_GPIO5_IO05 0x41 + IMX8QXP_ENET0_RGMII_RXD1_LSIO_GPIO5_IO06 0x41 + IMX8QXP_ENET0_RGMII_RXD2_LSIO_GPIO5_IO07 0x41 + >; + }; + + /* Colibri optional CAN on UART_B RTS/CTS */ + pinctrl_flexcan1: flexcan0grp { + fsl,pins = < + IMX8QXP_FLEXCAN0_TX_ADMA_FLEXCAN0_TX 0x21 /* SODIMM 32 */ + IMX8QXP_FLEXCAN0_RX_ADMA_FLEXCAN0_RX 0x21 /* SODIMM 34 */ + >; + }; + + /* Colibri optional CAN on PS2 */ + pinctrl_flexcan2: flexcan1grp { + fsl,pins = < + IMX8QXP_FLEXCAN1_TX_ADMA_FLEXCAN1_TX 0x21 /* SODIMM 55 */ + IMX8QXP_FLEXCAN1_RX_ADMA_FLEXCAN1_RX 0x21 /* SODIMM 63 */ + >; + }; + + /* Colibri optional CAN on UART_A TXD/RXD */ + pinctrl_flexcan3: flexcan2grp { + fsl,pins = < + IMX8QXP_FLEXCAN2_TX_ADMA_FLEXCAN2_TX 0x21 /* SODIMM 35 */ + IMX8QXP_FLEXCAN2_RX_ADMA_FLEXCAN2_RX 0x21 /* SODIMM 33 */ + >; + }; + + /* Colibri LCD Back-Light GPIO */ + pinctrl_gpio_bl_on: gpioblongrp { + fsl,pins = < + IMX8QXP_QSPI0A_DATA3_LSIO_GPIO3_IO12 0x60 /* SODIMM 71 */ + >; + }; + + pinctrl_gpiokeys: gpiokeysgrp { + fsl,pins = < + IMX8QXP_QSPI0A_DATA1_LSIO_GPIO3_IO10 0x06700041 /* SODIMM 45 */ + >; + }; + + pinctrl_hog0: hog0grp { + fsl,pins = < + IMX8QXP_ENET0_RGMII_TXD3_LSIO_GPIO5_IO02 0x06000020 /* SODIMM 65 */ + IMX8QXP_CSI_D07_CI_PI_D09 0x61 /* SODIMM 65 */ + IMX8QXP_QSPI0A_DATA2_LSIO_GPIO3_IO11 0x20 /* SODIMM 69 */ + IMX8QXP_SAI0_TXC_LSIO_GPIO0_IO26 0x20 /* SODIMM 79 */ + IMX8QXP_CSI_D02_CI_PI_D04 0x61 /* SODIMM 79 */ + IMX8QXP_ENET0_RGMII_RXC_LSIO_GPIO5_IO03 0x06000020 /* SODIMM 85 */ + IMX8QXP_CSI_D06_CI_PI_D08 0x61 /* SODIMM 85 */ + IMX8QXP_QSPI0B_SCLK_LSIO_GPIO3_IO17 0x20 /* SODIMM 95 */ + IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27 0x20 /* SODIMM 97 */ + IMX8QXP_CSI_D03_CI_PI_D05 0x61 /* SODIMM 97 */ + IMX8QXP_QSPI0B_DATA0_LSIO_GPIO3_IO18 0x20 /* SODIMM 99 */ + IMX8QXP_SAI0_TXFS_LSIO_GPIO0_IO28 0x20 /* SODIMM 101 */ + IMX8QXP_CSI_D00_CI_PI_D02 0x61 /* SODIMM 101 */ + IMX8QXP_SAI0_TXD_LSIO_GPIO0_IO25 0x20 /* SODIMM 103 */ + IMX8QXP_CSI_D01_CI_PI_D03 0x61 /* SODIMM 103 */ + IMX8QXP_QSPI0B_DATA1_LSIO_GPIO3_IO19 0x20 /* SODIMM 105 */ + IMX8QXP_QSPI0B_DATA2_LSIO_GPIO3_IO20 0x20 /* SODIMM 107 */ + IMX8QXP_USB_SS3_TC2_LSIO_GPIO4_IO05 0x20 /* SODIMM 127 */ + IMX8QXP_USB_SS3_TC3_LSIO_GPIO4_IO06 0x20 /* SODIMM 131 */ + IMX8QXP_USB_SS3_TC1_LSIO_GPIO4_IO04 0x20 /* SODIMM 133 */ + IMX8QXP_CSI_PCLK_LSIO_GPIO3_IO00 0x20 /* SODIMM 96 */ + IMX8QXP_QSPI0B_DATA3_LSIO_GPIO3_IO21 0x20 /* SODIMM 98 */ + IMX8QXP_SAI1_RXFS_LSIO_GPIO0_IO31 0x20 /* SODIMM 100 */ + IMX8QXP_QSPI0B_DQS_LSIO_GPIO3_IO22 0x20 /* SODIMM 102 */ + IMX8QXP_QSPI0B_SS0_B_LSIO_GPIO3_IO23 0x20 /* SODIMM 104 */ + IMX8QXP_QSPI0B_SS1_B_LSIO_GPIO3_IO24 0x20 /* SODIMM 106 */ + >; + }; + + pinctrl_hog1: hog1grp { + fsl,pins = < + IMX8QXP_CSI_MCLK_LSIO_GPIO3_IO01 0x20 /* SODIMM 75 */ + IMX8QXP_QSPI0A_SCLK_LSIO_GPIO3_IO16 0x20 /* SODIMM 93 */ + >; + }; + + /* + * This pin is used in the SCFW as a UART. Using it from + * Linux would require rewritting the SCFW board file. + */ + pinctrl_hog_scfw: hogscfwgrp { + fsl,pins = < + IMX8QXP_SCU_GPIO0_00_LSIO_GPIO2_IO03 0x20 /* SODIMM 144 */ + >; + }; + + /* On Module I2C */ + pinctrl_i2c0: i2c0grp { + fsl,pins = < + IMX8QXP_MIPI_CSI0_GPIO0_00_ADMA_I2C0_SCL 0x06000021 + IMX8QXP_MIPI_CSI0_GPIO0_01_ADMA_I2C0_SDA 0x06000021 + >; + }; + + /* MIPI DSI I2C accessible on SODIMM (X1) and FFC (X2) */ + pinctrl_i2c0_mipi_lvds0: i2c0mipilvds0grp { + fsl,pins = < + IMX8QXP_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL 0xc6000020 /* SODIMM 140 */ + IMX8QXP_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA 0xc6000020 /* SODIMM 142 */ + >; + }; + + /* MIPI CSI I2C accessible on SODIMM (X1) and FFC (X3) */ + pinctrl_i2c0_mipi_lvds1: i2c0mipilvds1grp { + fsl,pins = < + IMX8QXP_MIPI_DSI1_I2C0_SCL_MIPI_DSI1_I2C0_SCL 0xc6000020 /* SODIMM 186 */ + IMX8QXP_MIPI_DSI1_I2C0_SDA_MIPI_DSI1_I2C0_SDA 0xc6000020 /* SODIMM 188 */ + >; + }; + + /* Colibri I2C */ + pinctrl_i2c1: i2c1grp { + fsl,pins = < + IMX8QXP_MIPI_DSI0_GPIO0_00_ADMA_I2C1_SCL 0x06000021 /* SODIMM 196 */ + IMX8QXP_MIPI_DSI0_GPIO0_01_ADMA_I2C1_SDA 0x06000021 /* SODIMM 194 */ + >; + }; + + /* Colibri Parallel RGB LCD Interface */ + pinctrl_lcdif: lcdifgrp { + fsl,pins = < + IMX8QXP_MCLK_OUT0_ADMA_LCDIF_CLK 0x60 /* SODIMM 56 */ + IMX8QXP_SPI3_CS0_ADMA_LCDIF_HSYNC 0x60 /* SODIMM 68 */ + IMX8QXP_MCLK_IN0_ADMA_LCDIF_VSYNC 0x60 /* SODIMM 82 */ + IMX8QXP_MCLK_IN1_ADMA_LCDIF_EN 0x60 /* SODIMM 44 */ + IMX8QXP_USDHC1_RESET_B_LSIO_GPIO4_IO19 0x60 /* SODIMM 44 */ + IMX8QXP_ESAI0_FSR_ADMA_LCDIF_D00 0x60 /* SODIMM 76 */ + IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21 0x60 /* SODIMM 76 */ + IMX8QXP_ESAI0_FST_ADMA_LCDIF_D01 0x60 /* SODIMM 70 */ + IMX8QXP_ESAI0_SCKR_ADMA_LCDIF_D02 0x60 /* SODIMM 60 */ + IMX8QXP_ESAI0_SCKT_ADMA_LCDIF_D03 0x60 /* SODIMM 58 */ + IMX8QXP_ESAI0_TX0_ADMA_LCDIF_D04 0x60 /* SODIMM 78 */ + IMX8QXP_ESAI0_TX1_ADMA_LCDIF_D05 0x60 /* SODIMM 72 */ + IMX8QXP_ESAI0_TX2_RX3_ADMA_LCDIF_D06 0x60 /* SODIMM 80 */ + IMX8QXP_ESAI0_TX3_RX2_ADMA_LCDIF_D07 0x60 /* SODIMM 46 */ + IMX8QXP_ESAI0_TX4_RX1_ADMA_LCDIF_D08 0x60 /* SODIMM 62 */ + IMX8QXP_ESAI0_TX5_RX0_ADMA_LCDIF_D09 0x60 /* SODIMM 48 */ + IMX8QXP_SPDIF0_RX_ADMA_LCDIF_D10 0x60 /* SODIMM 74 */ + IMX8QXP_SPDIF0_TX_ADMA_LCDIF_D11 0x60 /* SODIMM 50 */ + IMX8QXP_SPDIF0_EXT_CLK_ADMA_LCDIF_D12 0x60 /* SODIMM 52 */ + IMX8QXP_SPI3_SCK_ADMA_LCDIF_D13 0x60 /* SODIMM 54 */ + IMX8QXP_SPI3_SDO_ADMA_LCDIF_D14 0x60 /* SODIMM 66 */ + IMX8QXP_SPI3_SDI_ADMA_LCDIF_D15 0x60 /* SODIMM 64 */ + IMX8QXP_SPI3_CS1_ADMA_LCDIF_D16 0x60 /* SODIMM 57 */ + IMX8QXP_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01 0x60 /* SODIMM 57 */ + IMX8QXP_UART1_CTS_B_ADMA_LCDIF_D17 0x60 /* SODIMM 61 */ + >; + }; + + /* Colibri SPI */ + pinctrl_lpspi2: lpspi2grp { + fsl,pins = < + IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00 0x21 /* SODIMM 86 */ + IMX8QXP_SPI2_SDO_ADMA_SPI2_SDO 0x06000040 /* SODIMM 92 */ + IMX8QXP_SPI2_SDI_ADMA_SPI2_SDI 0x06000040 /* SODIMM 90 */ + IMX8QXP_SPI2_SCK_ADMA_SPI2_SCK 0x06000040 /* SODIMM 88 */ + >; + }; + + /* Colibri UART_B */ + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + IMX8QXP_UART0_RX_ADMA_UART0_RX 0x06000020 /* SODIMM 36 */ + IMX8QXP_UART0_TX_ADMA_UART0_TX 0x06000020 /* SODIMM 38 */ + IMX8QXP_FLEXCAN0_RX_ADMA_UART0_RTS_B 0x06000020 /* SODIMM 34 */ + IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B 0x06000020 /* SODIMM 32 */ + >; + }; + + /* Colibri UART_C */ + pinctrl_lpuart2: lpuart2grp { + fsl,pins = < + IMX8QXP_UART2_RX_ADMA_UART2_RX 0x06000020 /* SODIMM 19 */ + IMX8QXP_UART2_TX_ADMA_UART2_TX 0x06000020 /* SODIMM 21 */ + >; + }; + + /* Colibri UART_A */ + pinctrl_lpuart3: lpuart3grp { + fsl,pins = < + IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX 0x06000020 /* SODIMM 33 */ + IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX 0x06000020 /* SODIMM 35 */ + >; + }; + + /* Colibri UART_A Control */ + pinctrl_lpuart3_ctrl: lpuart3ctrlgrp { + fsl,pins = < + IMX8QXP_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00 0x20 /* SODIMM 23 */ + IMX8QXP_SAI1_RXD_LSIO_GPIO0_IO29 0x20 /* SODIMM 25 */ + IMX8QXP_SAI1_RXC_LSIO_GPIO0_IO30 0x20 /* SODIMM 27 */ + IMX8QXP_CSI_RESET_LSIO_GPIO3_IO03 0x20 /* SODIMM 29 */ + IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22 0x20 /* SODIMM 31 */ + IMX8QXP_CSI_EN_LSIO_GPIO3_IO02 0x20 /* SODIMM 37 */ + >; + }; + + /* On module wifi module */ + pinctrl_pcieb: pciebgrp { + fsl,pins = < + IMX8QXP_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01 0x04000061 /* SODIMM 178 */ + IMX8QXP_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02 0x04000061 /* SODIMM 94 */ + IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00 0x60 /* SODIMM 81 */ + >; + }; + + /* Colibri PWM_A */ + pinctrl_pwm_a: pwmagrp { + /* both pins are connected together, reserve the unused CSI_D05 */ + fsl,pins = < + IMX8QXP_CSI_D05_CI_PI_D07 0x61 /* SODIMM 59 */ + IMX8QXP_SPI0_CS1_ADMA_LCD_PWM0_OUT 0x60 /* SODIMM 59 */ + >; + }; + + /* Colibri PWM_B */ + pinctrl_pwm_b: pwmbgrp { + fsl,pins = < + IMX8QXP_UART1_TX_LSIO_PWM0_OUT 0x60 /* SODIMM 28 */ + >; + }; + + /* Colibri PWM_C */ + pinctrl_pwm_c: pwmcgrp { + fsl,pins = < + IMX8QXP_UART1_RX_LSIO_PWM1_OUT 0x60 /* SODIMM 30 */ + >; + }; + + /* Colibri PWM_D */ + pinctrl_pwm_d: pwmdgrp { + /* both pins are connected together, reserve the unused CSI_D04 */ + fsl,pins = < + IMX8QXP_CSI_D04_CI_PI_D06 0x61 /* SODIMM 67 */ + IMX8QXP_UART1_RTS_B_LSIO_PWM2_OUT 0x60 /* SODIMM 67 */ + >; + }; + + /* On-module I2S */ + pinctrl_sai0: sai0grp { + fsl,pins = < + IMX8QXP_SPI0_SDI_ADMA_SAI0_TXD 0x06000040 + IMX8QXP_SPI0_CS0_ADMA_SAI0_RXD 0x06000040 + IMX8QXP_SPI0_SCK_ADMA_SAI0_TXC 0x06000040 + IMX8QXP_SPI0_SDO_ADMA_SAI0_TXFS 0x06000040 + >; + }; + + /* Colibri Audio Analogue Microphone GND */ + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + /* MIC GND EN */ + IMX8QXP_MIPI_CSI0_I2C0_SDA_LSIO_GPIO3_IO06 0x41 + >; + }; + + /* On-module SGTL5000 clock */ + pinctrl_sgtl5000_usb_clk: sgtl5000usbclkgrp { + fsl,pins = < + IMX8QXP_ADC_IN3_ADMA_ACM_MCLK_OUT0 0x21 + >; + }; + + /* On-module USB interrupt */ + pinctrl_usb3503a: usb3503agrp { + fsl,pins = < + IMX8QXP_MIPI_CSI0_MCLK_OUT_LSIO_GPIO3_IO04 0x61 + >; + }; + + /* Colibri USB Client Cable Detect */ + pinctrl_usbc_det: usbcdetgrp { + fsl,pins = < + IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09 0x06000040 /* SODIMM 137 */ + >; + }; + + /* USB Host Power Enable */ + pinctrl_usbh1_reg: usbh1reggrp { + fsl,pins = < + IMX8QXP_USB_SS3_TC0_LSIO_GPIO4_IO03 0x06000040 /* SODIMM 129 */ + >; + }; + + /* On-module eMMC */ + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x21 + IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21 + IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21 + IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21 + IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21 + IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21 + IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21 + IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21 + IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21 + IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41 + IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x21 + IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21 + IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21 + IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21 + IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21 + IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21 + IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21 + IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21 + IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21 + IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41 + IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x21 + IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21 + IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21 + IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21 + IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21 + IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21 + IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21 + IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21 + IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21 + IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41 + IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21 + >; + }; + + /* Colibri SD/MMC Card Detect */ + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + IMX8QXP_QSPI0A_DATA0_LSIO_GPIO3_IO09 0x06000021 /* SODIMM 43 */ + >; + }; + + pinctrl_usdhc2_gpio_sleep: usdhc2gpioslpgrp { + fsl,pins = < + IMX8QXP_QSPI0A_DATA0_LSIO_GPIO3_IO09 0x60 /* SODIMM 43 */ + >; + }; + + /* Colibri SD/MMC Card */ + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 47 */ + IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 190 */ + IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 192 */ + IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 49 */ + IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 51 */ + IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 53 */ + IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 47 */ + IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 190 */ + IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 192 */ + IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 49 */ + IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 51 */ + IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 53 */ + IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 47 */ + IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 190 */ + IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 192 */ + IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 49 */ + IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 51 */ + IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 53 */ + IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 + >; + }; + + pinctrl_usdhc2_sleep: usdhc2slpgrp { + fsl,pins = < + IMX8QXP_USDHC1_CLK_LSIO_GPIO4_IO23 0x60 /* SODIMM 47 */ + IMX8QXP_USDHC1_CMD_LSIO_GPIO4_IO24 0x60 /* SODIMM 190 */ + IMX8QXP_USDHC1_DATA0_LSIO_GPIO4_IO25 0x60 /* SODIMM 192 */ + IMX8QXP_USDHC1_DATA1_LSIO_GPIO4_IO26 0x60 /* SODIMM 49 */ + IMX8QXP_USDHC1_DATA2_LSIO_GPIO4_IO27 0x60 /* SODIMM 51 */ + IMX8QXP_USDHC1_DATA3_LSIO_GPIO4_IO28 0x60 /* SODIMM 53 */ + IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 + >; + }; + + pinctrl_wifi: wifigrp { + fsl,pins = < + IMX8QXP_SCU_BOOT_MODE3_SCU_DSC_RTC_CLOCK_OUTPUT_32K 0x20 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts index 19468058e6ae..d3d26cca7d52 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts @@ -137,6 +137,8 @@ }; &usdhc1 { + assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>; + assigned-clock-rates = <200000000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; bus-width = <8>; @@ -147,6 +149,8 @@ }; &usdhc2 { + assigned-clocks = <&clk IMX_CONN_SDHC1_CLK>; + assigned-clock-rates = <200000000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <4>; @@ -234,3 +238,7 @@ &adma_dsp { status = "okay"; }; + +&scu_key { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index 1133b412182a..9646a41e0532 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/imx8-clock.h> #include <dt-bindings/firmware/imx/rsrc.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/pads-imx8qxp.h> @@ -174,6 +175,12 @@ #power-domain-cells = <1>; }; + scu_key: scu-key { + compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key"; + linux,keycodes = <KEY_POWER>; + status = "disabled"; + }; + rtc: rtc { compatible = "fsl,imx8qxp-sc-rtc"; }; @@ -361,8 +368,6 @@ <&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>, <&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>; clock-names = "ipg", "per", "ahb"; - assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>; - assigned-clock-rates = <200000000>; power-domains = <&pd IMX_SC_R_SDHC_0>; status = "disabled"; }; @@ -376,8 +381,6 @@ <&conn_lpcg IMX_CONN_LPCG_SDHC1_PER_CLK>, <&conn_lpcg IMX_CONN_LPCG_SDHC1_HCLK>; clock-names = "ipg", "per", "ahb"; - assigned-clocks = <&clk IMX_CONN_SDHC1_CLK>; - assigned-clock-rates = <200000000>; power-domains = <&pd IMX_SC_R_SDHC_1>; fsl,tuning-start-tap = <20>; fsl,tuning-step= <2>; @@ -393,8 +396,6 @@ <&conn_lpcg IMX_CONN_LPCG_SDHC2_PER_CLK>, <&conn_lpcg IMX_CONN_LPCG_SDHC2_HCLK>; clock-names = "ipg", "per", "ahb"; - assigned-clocks = <&clk IMX_CONN_SDHC2_CLK>; - assigned-clock-rates = <200000000>; power-domains = <&pd IMX_SC_R_SDHC_2>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/s32v234-evb.dts b/arch/arm64/boot/dts/freescale/s32v234-evb.dts new file mode 100644 index 000000000000..4b802518cefc --- /dev/null +++ b/arch/arm64/boot/dts/freescale/s32v234-evb.dts @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * Copyright 2016-2017 NXP + */ + +/dts-v1/; +#include "s32v234.dtsi" + +/ { + model = "NXP S32V234-EVB2 Board"; + compatible = "fsl,s32v234-evb", "fsl,s32v234"; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/s32v234.dtsi b/arch/arm64/boot/dts/freescale/s32v234.dtsi new file mode 100644 index 000000000000..e746b9c48f7a --- /dev/null +++ b/arch/arm64/boot/dts/freescale/s32v234.dtsi @@ -0,0 +1,139 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * Copyright 2016-2018 NXP + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/memreserve/ 0x80000000 0x00010000; + +/ { + compatible = "fsl,s32v234"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x80000000>; + next-level-cache = <&cluster0_l2_cache>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x80000000>; + next-level-cache = <&cluster0_l2_cache>; + }; + + cpu2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x100>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x80000000>; + next-level-cache = <&cluster1_l2_cache>; + }; + + cpu3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x101>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x80000000>; + next-level-cache = <&cluster1_l2_cache>; + }; + + cluster0_l2_cache: l2-cache0 { + compatible = "cache"; + }; + + cluster1_l2_cache: l2-cache1 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>; + /* clock-frequency might be modified by u-boot, depending on the + * chip version. + */ + clock-frequency = <10000000>; + }; + + gic: interrupt-controller@7d001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x7d001000 0 0x1000>, + <0 0x7d002000 0 0x2000>, + <0 0x7d004000 0 0x2000>, + <0 0x7d006000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + aips0: aips-bus@40000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + reg = <0x0 0x40000000 0x0 0x7d000>; + ranges; + + uart0: serial@40053000 { + compatible = "fsl,s32v234-linflexuart"; + reg = <0x0 0x40053000 0x0 0x1000>; + interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + }; + + aips1: aips-bus@40080000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + reg = <0x0 0x40080000 0x0 0x70000>; + ranges; + + uart1: serial@400bc000 { + compatible = "fsl,s32v234-linflexuart"; + reg = <0x0 0x400bc000 0x0 0x1000>; + interrupts = <GIC_SPI 60 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 108e2a4227f6..2072b637b5af 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -260,6 +260,7 @@ compatible = "hisilicon,hi6220-aoctrl", "syscon"; reg = <0x0 0xf7800000 0x0 0x2000>; #clock-cells = <1>; + #reset-cells = <1>; }; sys_ctrl: sys_ctrl@f7030000 { @@ -1021,6 +1022,43 @@ clock-names = "apb_pclk"; cpu = <&cpu7>; }; + + mali: gpu@f4080000 { + compatible = "hisilicon,hi6220-mali", "arm,mali-450"; + reg = <0x0 0xf4080000 0x0 0x00040000>; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-names = "gp", + "gpmmu", + "pp", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pp2", + "ppmmu2", + "pp3", + "ppmmu3"; + clocks = <&media_ctrl HI6220_G3D_CLK>, + <&media_ctrl HI6220_G3D_PCLK>; + clock-names = "core", "bus"; + assigned-clocks = <&media_ctrl HI6220_G3D_CLK>, + <&media_ctrl HI6220_G3D_PCLK>; + assigned-clock-rates = <500000000>, <144000000>; + reset-names = "ao_g3d", "media_g3d"; + resets = <&ao_ctrl AO_G3D>, <&media_ctrl MEDIA_G3D>; + }; }; }; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi index 36abc25320a8..94090c6fb946 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi +++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi @@ -12,6 +12,19 @@ #address-cells = <2>; #size-cells = <2>; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + service_reserved: svcbuffer@0 { + compatible = "shared-dma-pool"; + reg = <0x0 0x0 0x0 0x1000000>; + alignment = <0x1000>; + no-map; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -81,6 +94,13 @@ interrupt-parent = <&intc>; ranges = <0 0 0 0xffffffff>; + base_fpga_region { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "fpga-region"; + fpga-mgr = <&fpga_mgr>; + }; + gmac0: ethernet@ff800000 { compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; reg = <0xff800000 0x2000>; @@ -442,5 +462,17 @@ status = "disabled"; }; + + firmware { + svc { + compatible = "intel,stratix10-svc"; + method = "smc"; + memory-region = <&service_reserved>; + + fpga_mgr: fpga-mgr { + compatible = "intel,stratix10-soc-fpga-mgr"; + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts index 7814a9e8eb08..e794a12ba7c5 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts +++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts @@ -18,6 +18,24 @@ stdout-path = "serial0:115200n8"; }; + leds { + compatible = "gpio-leds"; + hps0 { + label = "hps_led0"; + gpios = <&portb 20 GPIO_ACTIVE_HIGH>; + }; + + hps1 { + label = "hps_led1"; + gpios = <&portb 19 GPIO_ACTIVE_HIGH>; + }; + + hps2 { + label = "hps_led2"; + gpios = <&portb 21 GPIO_ACTIVE_HIGH>; + }; + }; + memory { device_type = "memory"; /* We expect the bootloader to fill in the reg */ @@ -70,6 +88,46 @@ status = "okay"; }; +&usb0 { + status = "okay"; + disable-over-current; +}; + &watchdog0 { status = "okay"; }; + +&qspi { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mt25qu02g"; + reg = <0>; + spi-max-frequency = <100000000>; + + m25p,fast-read; + cdns,page-size = <256>; + cdns,block-size = <16>; + cdns,read-delay = <1>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + qspi_boot: partition@0 { + label = "Boot and fpga data"; + reg = <0x0 0x034B0000>; + }; + + qspi_rootfs: partition@34B0000 { + label = "Root Filesystem - JFFS2"; + reg = <0x034B0000 0x0EB50000>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi index c8dc9c20fba3..64f3b135068d 100644 --- a/arch/arm64/boot/dts/lg/lg1312.dtsi +++ b/arch/arm64/boot/dts/lg/lg1312.dtsi @@ -124,7 +124,7 @@ amba { #address-cells = <2>; #size-cells = <1>; - #interrupts-cells = <3>; + #interrupt-cells = <3>; compatible = "simple-bus"; interrupt-parent = <&gic>; diff --git a/arch/arm64/boot/dts/lg/lg1313.dtsi b/arch/arm64/boot/dts/lg/lg1313.dtsi index 82c6645b58b7..ac23592ab011 100644 --- a/arch/arm64/boot/dts/lg/lg1313.dtsi +++ b/arch/arm64/boot/dts/lg/lg1313.dtsi @@ -124,7 +124,7 @@ amba { #address-cells = <2>; #size-cells = <1>; - #interrupts-cells = <3>; + #interrupt-cells = <3>; compatible = "simple-bus"; interrupt-parent = <&gic>; diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index 243338c914a4..f1b5127f0b89 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -10,3 +10,6 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin-singleshot.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8080-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += cn9130-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += cn9131-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db.dtb diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts new file mode 100644 index 000000000000..bd9ed9dc9c3e --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board with eMMC + * Copyright (C) 2018 Marvell + * + * Romain Perier <romain.perier@free-electrons.com> + * Konstantin Porotchkin <kostap@marvell.com> + * + */ +/* + * Schematic available at http://espressobin.net/wp-content/uploads/2017/08/ESPRESSObin_V5_Schematics.pdf + */ + +#include "armada-3720-espressobin.dtsi" + +/ { + model = "Globalscale Marvell ESPRESSOBin Board (eMMC)"; + compatible = "globalscale,espressobin-emmc", "globalscale,espressobin", + "marvell,armada3720", "marvell,armada3710"; +}; + +/* U11 */ +&sdhci0 { + non-removable; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,xenon-emmc; + marvell,xenon-tun-count = <9>; + marvell,pad-type = "fixed-1-8v"; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc_pins>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + mmccard: mmccard@0 { + compatible = "mmc-card"; + reg = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts new file mode 100644 index 000000000000..6e876a6d9532 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7 with eMMC + * Copyright (C) 2018 Marvell + * + * Romain Perier <romain.perier@free-electrons.com> + * Konstantin Porotchkin <kostap@marvell.com> + * + */ +/* + * Schematic available at http://wiki.espressobin.net/tiki-download_file.php?fileId=200 + */ + +#include "armada-3720-espressobin.dtsi" + +/ { + model = "Globalscale Marvell ESPRESSOBin Board V7 (eMMC)"; + compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7", + "globalscale,espressobin", "marvell,armada3720", + "marvell,armada3710"; +}; + +&switch0 { + ports { + port@1 { + reg = <1>; + label = "lan1"; + phy-handle = <&switch0phy0>; + }; + + port@3 { + reg = <3>; + label = "wan"; + phy-handle = <&switch0phy2>; + }; + }; +}; + +/* U11 */ +&sdhci0 { + non-removable; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,xenon-emmc; + marvell,xenon-tun-count = <9>; + marvell,pad-type = "fixed-1-8v"; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc_pins>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + mmccard: mmccard@0 { + compatible = "mmc-card"; + reg = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts new file mode 100644 index 000000000000..0f8405d085fd --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7 + * Copyright (C) 2018 Marvell + * + * Romain Perier <romain.perier@free-electrons.com> + * Konstantin Porotchkin <kostap@marvell.com> + * + */ +/* + * Schematic available at http://wiki.espressobin.net/tiki-download_file.php?fileId=200 + */ + +#include "armada-3720-espressobin.dtsi" + +/ { + model = "Globalscale Marvell ESPRESSOBin Board V7"; + compatible = "globalscale,espressobin-v7", "globalscale,espressobin", + "marvell,armada3720", "marvell,armada3710"; +}; + +&switch0 { + ports { + port@1 { + reg = <1>; + label = "lan1"; + phy-handle = <&switch0phy0>; + }; + + port@3 { + reg = <3>; + label = "wan"; + phy-handle = <&switch0phy2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts index fbcf03f86c96..1542d836c090 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts @@ -12,191 +12,9 @@ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include "armada-372x.dtsi" +#include "armada-3720-espressobin.dtsi" / { model = "Globalscale Marvell ESPRESSOBin Board"; compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x00000000 0x00000000 0x20000000>; - }; - - vcc_sd_reg1: regulator { - compatible = "regulator-gpio"; - regulator-name = "vcc_sd1"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - - gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>; - gpios-states = <0>; - states = <1800000 0x1 - 3300000 0x0>; - enable-active-high; - }; -}; - -/* J9 */ -&pcie0 { - status = "okay"; - phys = <&comphy1 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; -}; - -/* J6 */ -&sata { - status = "okay"; - phys = <&comphy2 0>; - phy-names = "sata-phy"; -}; - -/* J1 */ -&sdhci1 { - wp-inverted; - bus-width = <4>; - cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>; - marvell,pad-type = "sd"; - vqmmc-supply = <&vcc_sd_reg1>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdio_pins>; - status = "okay"; -}; - -/* U11 */ -&sdhci0 { - non-removable; - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs400-1_8v; - marvell,xenon-emmc; - marvell,xenon-tun-count = <9>; - marvell,pad-type = "fixed-1-8v"; - - pinctrl-names = "default"; - pinctrl-0 = <&mmc_pins>; -/* - * This eMMC is not populated on all boards, so disable it by - * default and let the bootloader enable it, if it is present - */ - status = "disabled"; -}; - -&spi0 { - status = "okay"; - - flash@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <104000000>; - m25p,fast-read; - }; -}; - -/* Exported on the micro USB connector J5 through an FTDI */ -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; - status = "okay"; -}; - -/* - * Connector J17 and J18 expose a number of different features. Some pins are - * multiplexed. This is the case for instance for the following features: - * - UART1 (pin 24 = RX, pin 26 = TX). See armada-3720-db.dts for an example of - * how to enable it. Beware that the signals are 1.8V TTL. - * - I2C - * - SPI - * - MMC - */ - -/* J7 */ -&usb3 { - status = "okay"; -}; - -/* J8 */ -&usb2 { - status = "okay"; -}; - -&mdio { - switch0: switch0@1 { - compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - dsa,member = <0 0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <ð0>; - phy-mode = "rgmii-id"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "wan"; - phy-handle = <&switch0phy0>; - }; - - port@2 { - reg = <2>; - label = "lan0"; - phy-handle = <&switch0phy1>; - }; - - port@3 { - reg = <3>; - label = "lan1"; - phy-handle = <&switch0phy2>; - }; - - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - switch0phy0: switch0phy0@11 { - reg = <0x11>; - }; - switch0phy1: switch0phy1@12 { - reg = <0x12>; - }; - switch0phy2: switch0phy2@13 { - reg = <0x13>; - }; - }; - }; -}; - -ð0 { - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>, <&smi_pins>; - phy-mode = "rgmii-id"; - status = "okay"; - - fixed-link { - speed = <1000>; - full-duplex; - }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi new file mode 100644 index 000000000000..53b8ac55a7f3 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board + * Copyright (C) 2016 Marvell + * + * Romain Perier <romain.perier@free-electrons.com> + * + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "armada-372x.dtsi" + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + vcc_sd_reg1: regulator { + compatible = "regulator-gpio"; + regulator-name = "vcc_sd1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + states = <1800000 0x1 + 3300000 0x0>; + enable-active-high; + }; +}; + +/* J9 */ +&pcie0 { + status = "okay"; + phys = <&comphy1 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; +}; + +/* J6 */ +&sata { + status = "okay"; + phys = <&comphy2 0>; + phy-names = "sata-phy"; +}; + +/* J1 */ +&sdhci1 { + wp-inverted; + bus-width = <4>; + cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>; + marvell,pad-type = "sd"; + vqmmc-supply = <&vcc_sd_reg1>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pins>; + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + reg = <0>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <104000000>; + m25p,fast-read; + }; +}; + +/* Exported on the micro USB connector J5 through an FTDI */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; + +/* + * Connector J17 and J18 expose a number of different features. Some pins are + * multiplexed. This is the case for instance for the following features: + * - UART1 (pin 24 = RX, pin 26 = TX). See armada-3720-db.dts for an example of + * how to enable it. Beware that the signals are 1.8V TTL. + * - I2C + * - SPI + * - MMC + */ + +/* J7 */ +&usb3 { + status = "okay"; +}; + +/* J8 */ +&usb2 { + status = "okay"; +}; + +&mdio { + switch0: switch0@1 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + dsa,member = <0 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <ð0>; + phy-mode = "rgmii-id"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "wan"; + phy-handle = <&switch0phy0>; + }; + + port@2 { + reg = <2>; + label = "lan0"; + phy-handle = <&switch0phy1>; + }; + + port@3 { + reg = <3>; + label = "lan1"; + phy-handle = <&switch0phy2>; + }; + + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy0: switch0phy0@11 { + reg = <0x11>; + }; + switch0phy1: switch0phy1@12 { + reg = <0x12>; + }; + switch0phy2: switch0phy2@13 { + reg = <0x13>; + }; + }; + }; +}; + +ð0 { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>, <&smi_pins>; + phy-mode = "rgmii-id"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts index 5f350cc71a2f..bb42d1e6a4e9 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -106,6 +106,14 @@ /* enabled by U-Boot if SFP module is present */ status = "disabled"; }; + + firmware { + turris-mox-rwtm { + compatible = "cznic,turris-mox-rwtm"; + mboxes = <&rwtm 0>; + status = "okay"; + }; + }; }; &i2c0 { diff --git a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi index e5c6d7c25819..293403a1a333 100644 --- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi @@ -17,23 +17,23 @@ /* * Instantiate the CP110 */ -#define CP110_NAME cp0 -#define CP110_BASE f2000000 -#define CP110_PCIE_IO_BASE 0xf9000000 -#define CP110_PCIE_MEM_BASE 0xf6000000 -#define CP110_PCIE0_BASE f2600000 -#define CP110_PCIE1_BASE f2620000 -#define CP110_PCIE2_BASE f2640000 +#define CP11X_NAME cp0 +#define CP11X_BASE f2000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xf6000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f2600000 +#define CP11X_PCIE1_BASE f2620000 +#define CP11X_PCIE2_BASE f2640000 #include "armada-cp110.dtsi" -#undef CP110_NAME -#undef CP110_BASE -#undef CP110_PCIE_IO_BASE -#undef CP110_PCIE_MEM_BASE -#undef CP110_PCIE0_BASE -#undef CP110_PCIE1_BASE -#undef CP110_PCIE2_BASE +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE &cp0_gpio1 { status = "okay"; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi index d250f4b2bfed..572e2610e0a3 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi @@ -179,8 +179,7 @@ num-lanes = <4>; num-viewport = <8>; reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>; - ranges = <0x81000000 0x0 0xf9010000 0x0 0xf9010000 0x0 0x10000 - 0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>; + ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>; phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>, <&cp0_comphy2 0>, <&cp0_comphy3 0>; phy-names = "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy", diff --git a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi index 8129b40f12a4..ee67c70bf02e 100644 --- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi @@ -19,44 +19,44 @@ /* * Instantiate the master CP110 */ -#define CP110_NAME cp0 -#define CP110_BASE f2000000 -#define CP110_PCIE_IO_BASE 0xf9000000 -#define CP110_PCIE_MEM_BASE 0xf6000000 -#define CP110_PCIE0_BASE f2600000 -#define CP110_PCIE1_BASE f2620000 -#define CP110_PCIE2_BASE f2640000 +#define CP11X_NAME cp0 +#define CP11X_BASE f2000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xf6000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f2600000 +#define CP11X_PCIE1_BASE f2620000 +#define CP11X_PCIE2_BASE f2640000 #include "armada-cp110.dtsi" -#undef CP110_NAME -#undef CP110_BASE -#undef CP110_PCIE_IO_BASE -#undef CP110_PCIE_MEM_BASE -#undef CP110_PCIE0_BASE -#undef CP110_PCIE1_BASE -#undef CP110_PCIE2_BASE +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE /* * Instantiate the slave CP110 */ -#define CP110_NAME cp1 -#define CP110_BASE f4000000 -#define CP110_PCIE_IO_BASE 0xfd000000 -#define CP110_PCIE_MEM_BASE 0xfa000000 -#define CP110_PCIE0_BASE f4600000 -#define CP110_PCIE1_BASE f4620000 -#define CP110_PCIE2_BASE f4640000 +#define CP11X_NAME cp1 +#define CP11X_BASE f4000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xfa000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f4600000 +#define CP11X_PCIE1_BASE f4620000 +#define CP11X_PCIE2_BASE f4640000 #include "armada-cp110.dtsi" -#undef CP110_NAME -#undef CP110_BASE -#undef CP110_PCIE_IO_BASE -#undef CP110_PCIE_MEM_BASE -#undef CP110_PCIE0_BASE -#undef CP110_PCIE1_BASE -#undef CP110_PCIE2_BASE +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE /* The 80x0 has two CP blocks, but uses only one block from each. */ &cp1_gpio1 { diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi index 9024a2d9db07..09849558a776 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi @@ -21,6 +21,14 @@ reg = <0x000>; enable-method = "psci"; #cooling-cells = <2>; + clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2>; }; cpu1: cpu@1 { device_type = "cpu"; @@ -28,6 +36,21 @@ reg = <0x001>; enable-method = "psci"; #cooling-cells = <2>; + clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2>; + }; + + l2: l2-cache { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; }; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi index c25bc65727b5..3db427122f9e 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi @@ -22,6 +22,13 @@ enable-method = "psci"; #cooling-cells = <2>; clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_0>; }; cpu1: cpu@1 { device_type = "cpu"; @@ -30,6 +37,13 @@ enable-method = "psci"; #cooling-cells = <2>; clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_0>; }; cpu2: cpu@100 { device_type = "cpu"; @@ -38,6 +52,13 @@ enable-method = "psci"; #cooling-cells = <2>; clocks = <&cpu_clk 1>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; }; cpu3: cpu@101 { device_type = "cpu"; @@ -46,6 +67,27 @@ enable-method = "psci"; #cooling-cells = <2>; clocks = <&cpu_clk 1>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; + }; + + l2_0: l2-cache0 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + }; + + l2_1: l2-cache1 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; }; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index d06dd198f2c7..866628679ac7 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -5,454 +5,26 @@ * Device Tree file for Marvell Armada AP806. */ -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/thermal/thermal.h> - -/dts-v1/; +#define AP_NAME ap806 +#include "armada-ap80x.dtsi" / { model = "Marvell Armada AP806"; compatible = "marvell,armada-ap806"; - #address-cells = <2>; - #size-cells = <2>; - - aliases { - serial0 = &uart0; - serial1 = &uart1; - gpio0 = &ap_gpio; - spi0 = &spi0; - }; - - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - /* - * This area matches the mapping done with a - * mainline U-Boot, and should be updated by the - * bootloader. - */ - - psci-area@4000000 { - reg = <0x0 0x4000000 0x0 0x200000>; - no-map; - }; - }; - - ap806 { - #address-cells = <2>; - #size-cells = <2>; - compatible = "simple-bus"; - interrupt-parent = <&gic>; - ranges; - - config-space@f0000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0x0 0x0 0xf0000000 0x1000000>; - - gic: interrupt-controller@210000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - interrupt-controller; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - reg = <0x210000 0x10000>, - <0x220000 0x20000>, - <0x240000 0x20000>, - <0x260000 0x20000>; - - gic_v2m0: v2m@280000 { - compatible = "arm,gic-v2m-frame"; - msi-controller; - reg = <0x280000 0x1000>; - arm,msi-base-spi = <160>; - arm,msi-num-spis = <32>; - }; - gic_v2m1: v2m@290000 { - compatible = "arm,gic-v2m-frame"; - msi-controller; - reg = <0x290000 0x1000>; - arm,msi-base-spi = <192>; - arm,msi-num-spis = <32>; - }; - gic_v2m2: v2m@2a0000 { - compatible = "arm,gic-v2m-frame"; - msi-controller; - reg = <0x2a0000 0x1000>; - arm,msi-base-spi = <224>; - arm,msi-num-spis = <32>; - }; - gic_v2m3: v2m@2b0000 { - compatible = "arm,gic-v2m-frame"; - msi-controller; - reg = <0x2b0000 0x1000>; - arm,msi-base-spi = <256>; - arm,msi-num-spis = <32>; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - }; - - pmu { - compatible = "arm,cortex-a72-pmu"; - interrupt-parent = <&pic>; - interrupts = <17>; - }; - - odmi: odmi@300000 { - compatible = "marvell,odmi-controller"; - interrupt-controller; - msi-controller; - marvell,odmi-frames = <4>; - reg = <0x300000 0x4000>, - <0x304000 0x4000>, - <0x308000 0x4000>, - <0x30C000 0x4000>; - marvell,spi-base = <128>, <136>, <144>, <152>; - }; - - gicp: gicp@3f0040 { - compatible = "marvell,ap806-gicp"; - reg = <0x3f0040 0x10>; - marvell,spi-ranges = <64 64>, <288 64>; - msi-controller; - }; - - pic: interrupt-controller@3f0100 { - compatible = "marvell,armada-8k-pic"; - reg = <0x3f0100 0x10>; - #interrupt-cells = <1>; - interrupt-controller; - interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; - }; - - sei: interrupt-controller@3f0200 { - compatible = "marvell,ap806-sei"; - reg = <0x3f0200 0x40>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <1>; - interrupt-controller; - msi-controller; - }; - - xor@400000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x400000 0x1000>, - <0x410000 0x1000>; - msi-parent = <&gic_v2m0>; - clocks = <&ap_clk 3>; - dma-coherent; - }; - - xor@420000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x420000 0x1000>, - <0x430000 0x1000>; - msi-parent = <&gic_v2m0>; - clocks = <&ap_clk 3>; - dma-coherent; - }; - - xor@440000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x440000 0x1000>, - <0x450000 0x1000>; - msi-parent = <&gic_v2m0>; - clocks = <&ap_clk 3>; - dma-coherent; - }; - - xor@460000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x460000 0x1000>, - <0x470000 0x1000>; - msi-parent = <&gic_v2m0>; - clocks = <&ap_clk 3>; - dma-coherent; - }; - - spi0: spi@510600 { - compatible = "marvell,armada-380-spi"; - reg = <0x510600 0x50>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ap_clk 3>; - status = "disabled"; - }; - - i2c0: i2c@511000 { - compatible = "marvell,mv78230-i2c"; - reg = <0x511000 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; - timeout-ms = <1000>; - clocks = <&ap_clk 3>; - status = "disabled"; - }; - - uart0: serial@512000 { - compatible = "snps,dw-apb-uart"; - reg = <0x512000 0x100>; - reg-shift = <2>; - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; - reg-io-width = <1>; - clocks = <&ap_clk 3>; - status = "disabled"; - }; - - uart1: serial@512100 { - compatible = "snps,dw-apb-uart"; - reg = <0x512100 0x100>; - reg-shift = <2>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; - reg-io-width = <1>; - clocks = <&ap_clk 3>; - status = "disabled"; - - }; - - watchdog: watchdog@610000 { - compatible = "arm,sbsa-gwdt"; - reg = <0x610000 0x1000>, <0x600000 0x1000>; - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; - }; - - ap_sdhci0: sdhci@6e0000 { - compatible = "marvell,armada-ap806-sdhci"; - reg = <0x6e0000 0x300>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core"; - clocks = <&ap_clk 4>; - dma-coherent; - marvell,xenon-phy-slow-mode; - status = "disabled"; - }; - - ap_syscon: system-controller@6f4000 { - compatible = "syscon", "simple-mfd"; - reg = <0x6f4000 0x2000>; - - ap_clk: clock { - compatible = "marvell,ap806-clock"; - #clock-cells = <1>; - }; - - ap_pinctrl: pinctrl { - compatible = "marvell,ap806-pinctrl"; - - uart0_pins: uart0-pins { - marvell,pins = "mpp11", "mpp19"; - marvell,function = "uart0"; - }; - }; - - ap_gpio: gpio@1040 { - compatible = "marvell,armada-8k-gpio"; - offset = <0x1040>; - ngpios = <20>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&ap_pinctrl 0 0 20>; - }; - }; - - ap_syscon1: system-controller@6f8000 { - compatible = "syscon", "simple-mfd"; - reg = <0x6f8000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - - cpu_clk: clock-cpu@278 { - compatible = "marvell,ap806-cpu-clock"; - clocks = <&ap_clk 0>, <&ap_clk 1>; - #clock-cells = <1>; - reg = <0x278 0xa30>; - }; +}; - ap_thermal: thermal-sensor@80 { - compatible = "marvell,armada-ap806-thermal"; - reg = <0x80 0x10>; - interrupt-parent = <&sei>; - interrupts = <18>; - #thermal-sensor-cells = <1>; - }; - }; - }; +&ap_syscon0 { + ap_clk: clock { + compatible = "marvell,ap806-clock"; + #clock-cells = <1>; }; +}; - /* - * The thermal IP features one internal sensor plus, if applicable, one - * remote channel wired to one sensor per CPU. - * - * Only one thermal zone per AP/CP may trigger interrupts at a time, the - * first one that will have a critical trip point will be chosen. - */ - thermal-zones { - ap_thermal_ic: ap-thermal-ic { - polling-delay-passive = <0>; /* Interrupt driven */ - polling-delay = <0>; /* Interrupt driven */ - - thermal-sensors = <&ap_thermal 0>; - - trips { - ap_crit: ap-crit { - temperature = <100000>; /* mC degrees */ - hysteresis = <2000>; /* mC degrees */ - type = "critical"; - }; - }; - - cooling-maps { }; - }; - - ap_thermal_cpu0: ap-thermal-cpu0 { - polling-delay-passive = <1000>; - polling-delay = <1000>; - - thermal-sensors = <&ap_thermal 1>; - - trips { - cpu0_hot: cpu0-hot { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu0_emerg: cpu0-emerg { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - }; - - cooling-maps { - map0_hot: map0-hot { - trip = <&cpu0_hot>; - cooling-device = <&cpu0 1 2>, - <&cpu1 1 2>; - }; - map0_emerg: map0-ermerg { - trip = <&cpu0_emerg>; - cooling-device = <&cpu0 3 3>, - <&cpu1 3 3>; - }; - }; - }; - - ap_thermal_cpu1: ap-thermal-cpu1 { - polling-delay-passive = <1000>; - polling-delay = <1000>; - - thermal-sensors = <&ap_thermal 2>; - - trips { - cpu1_hot: cpu1-hot { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu1_emerg: cpu1-emerg { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - }; - - cooling-maps { - map1_hot: map1-hot { - trip = <&cpu1_hot>; - cooling-device = <&cpu0 1 2>, - <&cpu1 1 2>; - }; - map1_emerg: map1-emerg { - trip = <&cpu1_emerg>; - cooling-device = <&cpu0 3 3>, - <&cpu1 3 3>; - }; - }; - }; - - ap_thermal_cpu2: ap-thermal-cpu2 { - polling-delay-passive = <1000>; - polling-delay = <1000>; - - thermal-sensors = <&ap_thermal 3>; - - trips { - cpu2_hot: cpu2-hot { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu2_emerg: cpu2-emerg { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - }; - - cooling-maps { - map2_hot: map2-hot { - trip = <&cpu2_hot>; - cooling-device = <&cpu2 1 2>, - <&cpu3 1 2>; - }; - map2_emerg: map2-emerg { - trip = <&cpu2_emerg>; - cooling-device = <&cpu2 3 3>, - <&cpu3 3 3>; - }; - }; - }; - - ap_thermal_cpu3: ap-thermal-cpu3 { - polling-delay-passive = <1000>; - polling-delay = <1000>; - - thermal-sensors = <&ap_thermal 4>; - - trips { - cpu3_hot: cpu3-hot { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu3_emerg: cpu3-emerg { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - }; - - cooling-maps { - map3_hot: map3-bhot { - trip = <&cpu3_hot>; - cooling-device = <&cpu2 1 2>, - <&cpu3 1 2>; - }; - map3_emerg: map3-emerg { - trip = <&cpu3_emerg>; - cooling-device = <&cpu2 3 3>, - <&cpu3 3 3>; - }; - }; - }; +&ap_syscon1 { + cpu_clk: clock-cpu@278 { + compatible = "marvell,ap806-cpu-clock"; + clocks = <&ap_clk 0>, <&ap_clk 1>; + #clock-cells = <1>; + reg = <0x278 0xa30>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi new file mode 100644 index 000000000000..840466e143b4 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Marvell Armada AP807 Quad + * + * Copyright (C) 2019 Marvell Technology Group Ltd. + */ + +#include "armada-ap807.dtsi" + +/ { + model = "Marvell Armada AP807 Quad"; + compatible = "marvell,armada-ap807-quad", "marvell,armada-ap807"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x000>; + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_0>; + }; + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x001>; + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_0>; + }; + cpu2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x100>; + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 1>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; + }; + cpu3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x101>; + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 1>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; + }; + + l2_0: l2-cache0 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + }; + + l2_1: l2-cache1 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-ap807.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi new file mode 100644 index 000000000000..623010f3ca89 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Marvell Armada AP807 + * + * Copyright (C) 2019 Marvell Technology Group Ltd. + */ + +#define AP_NAME ap807 +#include "armada-ap80x.dtsi" + +/ { + model = "Marvell Armada AP807"; + compatible = "marvell,armada-ap807"; +}; + +&ap_syscon0 { + ap_clk: clock { + compatible = "marvell,ap807-clock"; + #clock-cells = <1>; + }; +}; + +&ap_syscon1 { + cpu_clk: clock-cpu { + compatible = "marvell,ap807-cpu-clock"; + clocks = <&ap_clk 0>, <&ap_clk 1>; + #clock-cells = <1>; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi new file mode 100644 index 000000000000..e7438c21ccee --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi @@ -0,0 +1,444 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell Technology Group Ltd. + * + * Device Tree file for Marvell Armada AP80x. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + gpio0 = &ap_gpio; + spi0 = &spi0; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * This area matches the mapping done with a + * mainline U-Boot, and should be updated by the + * bootloader. + */ + + psci-area@4000000 { + reg = <0x0 0x4000000 0x0 0x200000>; + no-map; + }; + }; + + AP_NAME { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + config-space@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x0 0x0 0xf0000000 0x1000000>; + + gic: interrupt-controller@210000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + reg = <0x210000 0x10000>, + <0x220000 0x20000>, + <0x240000 0x20000>, + <0x260000 0x20000>; + + gic_v2m0: v2m@280000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x280000 0x1000>; + arm,msi-base-spi = <160>; + arm,msi-num-spis = <32>; + }; + gic_v2m1: v2m@290000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x290000 0x1000>; + arm,msi-base-spi = <192>; + arm,msi-num-spis = <32>; + }; + gic_v2m2: v2m@2a0000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x2a0000 0x1000>; + arm,msi-base-spi = <224>; + arm,msi-num-spis = <32>; + }; + gic_v2m3: v2m@2b0000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x2b0000 0x1000>; + arm,msi-base-spi = <256>; + arm,msi-num-spis = <32>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu { + compatible = "arm,cortex-a72-pmu"; + interrupt-parent = <&pic>; + interrupts = <17>; + }; + + odmi: odmi@300000 { + compatible = "marvell,odmi-controller"; + interrupt-controller; + msi-controller; + marvell,odmi-frames = <4>; + reg = <0x300000 0x4000>, + <0x304000 0x4000>, + <0x308000 0x4000>, + <0x30C000 0x4000>; + marvell,spi-base = <128>, <136>, <144>, <152>; + }; + + gicp: gicp@3f0040 { + compatible = "marvell,ap806-gicp"; + reg = <0x3f0040 0x10>; + marvell,spi-ranges = <64 64>, <288 64>; + msi-controller; + }; + + pic: interrupt-controller@3f0100 { + compatible = "marvell,armada-8k-pic"; + reg = <0x3f0100 0x10>; + #interrupt-cells = <1>; + interrupt-controller; + interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; + }; + + sei: interrupt-controller@3f0200 { + compatible = "marvell,ap806-sei"; + reg = <0x3f0200 0x40>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-controller; + msi-controller; + }; + + xor@400000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x400000 0x1000>, + <0x410000 0x1000>; + msi-parent = <&gic_v2m0>; + clocks = <&ap_clk 3>; + dma-coherent; + }; + + xor@420000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x420000 0x1000>, + <0x430000 0x1000>; + msi-parent = <&gic_v2m0>; + clocks = <&ap_clk 3>; + dma-coherent; + }; + + xor@440000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x440000 0x1000>, + <0x450000 0x1000>; + msi-parent = <&gic_v2m0>; + clocks = <&ap_clk 3>; + dma-coherent; + }; + + xor@460000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x460000 0x1000>, + <0x470000 0x1000>; + msi-parent = <&gic_v2m0>; + clocks = <&ap_clk 3>; + dma-coherent; + }; + + spi0: spi@510600 { + compatible = "marvell,armada-380-spi"; + reg = <0x510600 0x50>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ap_clk 3>; + status = "disabled"; + }; + + i2c0: i2c@511000 { + compatible = "marvell,mv78230-i2c"; + reg = <0x511000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + timeout-ms = <1000>; + clocks = <&ap_clk 3>; + status = "disabled"; + }; + + uart0: serial@512000 { + compatible = "snps,dw-apb-uart"; + reg = <0x512000 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clocks = <&ap_clk 3>; + status = "disabled"; + }; + + uart1: serial@512100 { + compatible = "snps,dw-apb-uart"; + reg = <0x512100 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clocks = <&ap_clk 3>; + status = "disabled"; + + }; + + watchdog: watchdog@610000 { + compatible = "arm,sbsa-gwdt"; + reg = <0x610000 0x1000>, <0x600000 0x1000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + }; + + ap_sdhci0: sdhci@6e0000 { + compatible = "marvell,armada-ap806-sdhci"; + reg = <0x6e0000 0x300>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core"; + clocks = <&ap_clk 4>; + dma-coherent; + marvell,xenon-phy-slow-mode; + status = "disabled"; + }; + + ap_syscon0: system-controller@6f4000 { + compatible = "syscon", "simple-mfd"; + reg = <0x6f4000 0x2000>; + + ap_pinctrl: pinctrl { + compatible = "marvell,ap806-pinctrl"; + + uart0_pins: uart0-pins { + marvell,pins = "mpp11", "mpp19"; + marvell,function = "uart0"; + }; + }; + + ap_gpio: gpio@1040 { + compatible = "marvell,armada-8k-gpio"; + offset = <0x1040>; + ngpios = <20>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&ap_pinctrl 0 0 20>; + }; + }; + + ap_syscon1: system-controller@6f8000 { + compatible = "syscon", "simple-mfd"; + reg = <0x6f8000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + ap_thermal: thermal-sensor@80 { + compatible = "marvell,armada-ap806-thermal"; + reg = <0x80 0x10>; + interrupt-parent = <&sei>; + interrupts = <18>; + #thermal-sensor-cells = <1>; + }; + }; + }; + }; + + /* + * The thermal IP features one internal sensor plus, if applicable, one + * remote channel wired to one sensor per CPU. + * + * Only one thermal zone per AP/CP may trigger interrupts at a time, the + * first one that will have a critical trip point will be chosen. + */ + thermal-zones { + ap_thermal_ic: ap-thermal-ic { + polling-delay-passive = <0>; /* Interrupt driven */ + polling-delay = <0>; /* Interrupt driven */ + + thermal-sensors = <&ap_thermal 0>; + + trips { + ap_crit: ap-crit { + temperature = <100000>; /* mC degrees */ + hysteresis = <2000>; /* mC degrees */ + type = "critical"; + }; + }; + + cooling-maps { }; + }; + + ap_thermal_cpu0: ap-thermal-cpu0 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 1>; + + trips { + cpu0_hot: cpu0-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu0_emerg: cpu0-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map0_hot: map0-hot { + trip = <&cpu0_hot>; + cooling-device = <&cpu0 1 2>, + <&cpu1 1 2>; + }; + map0_emerg: map0-ermerg { + trip = <&cpu0_emerg>; + cooling-device = <&cpu0 3 3>, + <&cpu1 3 3>; + }; + }; + }; + + ap_thermal_cpu1: ap-thermal-cpu1 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 2>; + + trips { + cpu1_hot: cpu1-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu1_emerg: cpu1-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map1_hot: map1-hot { + trip = <&cpu1_hot>; + cooling-device = <&cpu0 1 2>, + <&cpu1 1 2>; + }; + map1_emerg: map1-emerg { + trip = <&cpu1_emerg>; + cooling-device = <&cpu0 3 3>, + <&cpu1 3 3>; + }; + }; + }; + + ap_thermal_cpu2: ap-thermal-cpu2 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 3>; + + trips { + cpu2_hot: cpu2-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu2_emerg: cpu2-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map2_hot: map2-hot { + trip = <&cpu2_hot>; + cooling-device = <&cpu2 1 2>, + <&cpu3 1 2>; + }; + map2_emerg: map2-emerg { + trip = <&cpu2_emerg>; + cooling-device = <&cpu2 3 3>, + <&cpu3 3 3>; + }; + }; + }; + + ap_thermal_cpu3: ap-thermal-cpu3 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 4>; + + trips { + cpu3_hot: cpu3-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu3_emerg: cpu3-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map3_hot: map3-bhot { + trip = <&cpu3_hot>; + cooling-device = <&cpu2 1 2>, + <&cpu3 1 2>; + }; + map3_emerg: map3-emerg { + trip = <&cpu3_emerg>; + cooling-device = <&cpu2 3 3>, + <&cpu3 3 3>; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-common.dtsi b/arch/arm64/boot/dts/marvell/armada-common.dtsi index b29c6405d214..c04c6c475022 100644 --- a/arch/arm64/boot/dts/marvell/armada-common.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-common.dtsi @@ -6,6 +6,6 @@ /* Common definitions used by Armada 7K/8K DTs */ #define PASTER(x, y) x ## y #define EVALUATOR(x, y) PASTER(x, y) -#define CP110_LABEL(name) EVALUATOR(CP110_NAME, EVALUATOR(_, name)) -#define CP110_NODE_NAME(name) EVALUATOR(CP110_NAME, EVALUATOR(-, name)) +#define CP11X_LABEL(name) EVALUATOR(CP11X_NAME, EVALUATOR(_, name)) +#define CP11X_NODE_NAME(name) EVALUATOR(CP11X_NAME, EVALUATOR(-, name)) #define ADDRESSIFY(addr) EVALUATOR(0x, addr) diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi index d81944902650..4fd33b0fa56e 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi @@ -1,579 +1,12 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * Copyright (C) 2016 Marvell Technology Group Ltd. + * Copyright (C) 2019 Marvell Technology Group Ltd. * * Device Tree file for Marvell Armada CP110. */ -#include <dt-bindings/interrupt-controller/mvebu-icu.h> -#include <dt-bindings/thermal/thermal.h> +#define CP11X_TYPE cp110 -#include "armada-common.dtsi" +#include "armada-cp11x.dtsi" -#define CP110_PCIEx_IO_BASE(iface) (CP110_PCIE_IO_BASE + (iface * 0x10000)) -#define CP110_PCIEx_MEM_BASE(iface) (CP110_PCIE_MEM_BASE + (iface * 0x1000000)) -#define CP110_PCIEx_CONF_BASE(iface) (CP110_PCIEx_MEM_BASE(iface) + 0xf00000) - -/ { - /* - * The contents of the node are defined below, in order to - * save one indentation level - */ - CP110_NAME: CP110_NAME { }; - - /* - * CPs only have one sensor in the thermal IC. - * - * The cooling maps are empty as there are no cooling devices. - */ - thermal-zones { - CP110_LABEL(thermal_ic): CP110_NODE_NAME(thermal-ic) { - polling-delay-passive = <0>; /* Interrupt driven */ - polling-delay = <0>; /* Interrupt driven */ - - thermal-sensors = <&CP110_LABEL(thermal) 0>; - - trips { - CP110_LABEL(crit): crit { - temperature = <100000>; /* mC degrees */ - hysteresis = <2000>; /* mC degrees */ - type = "critical"; - }; - }; - - cooling-maps { }; - }; - }; -}; - -&CP110_NAME { - #address-cells = <2>; - #size-cells = <2>; - compatible = "simple-bus"; - interrupt-parent = <&CP110_LABEL(icu_nsr)>; - ranges; - - config-space@CP110_BASE { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0x0 0x0 ADDRESSIFY(CP110_BASE) 0x2000000>; - - CP110_LABEL(ethernet): ethernet@0 { - compatible = "marvell,armada-7k-pp22"; - reg = <0x0 0x100000>, <0x129000 0xb000>; - clocks = <&CP110_LABEL(clk) 1 3>, <&CP110_LABEL(clk) 1 9>, - <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>, - <&CP110_LABEL(clk) 1 18>; - clock-names = "pp_clk", "gop_clk", - "mg_clk", "mg_core_clk", "axi_clk"; - marvell,system-controller = <&CP110_LABEL(syscon0)>; - status = "disabled"; - dma-coherent; - - CP110_LABEL(eth0): eth0 { - interrupts = <39 IRQ_TYPE_LEVEL_HIGH>, - <43 IRQ_TYPE_LEVEL_HIGH>, - <47 IRQ_TYPE_LEVEL_HIGH>, - <51 IRQ_TYPE_LEVEL_HIGH>, - <55 IRQ_TYPE_LEVEL_HIGH>, - <59 IRQ_TYPE_LEVEL_HIGH>, - <63 IRQ_TYPE_LEVEL_HIGH>, - <67 IRQ_TYPE_LEVEL_HIGH>, - <71 IRQ_TYPE_LEVEL_HIGH>, - <129 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hif0", "hif1", "hif2", - "hif3", "hif4", "hif5", "hif6", "hif7", - "hif8", "link"; - port-id = <0>; - gop-port-id = <0>; - status = "disabled"; - }; - - CP110_LABEL(eth1): eth1 { - interrupts = <40 IRQ_TYPE_LEVEL_HIGH>, - <44 IRQ_TYPE_LEVEL_HIGH>, - <48 IRQ_TYPE_LEVEL_HIGH>, - <52 IRQ_TYPE_LEVEL_HIGH>, - <56 IRQ_TYPE_LEVEL_HIGH>, - <60 IRQ_TYPE_LEVEL_HIGH>, - <64 IRQ_TYPE_LEVEL_HIGH>, - <68 IRQ_TYPE_LEVEL_HIGH>, - <72 IRQ_TYPE_LEVEL_HIGH>, - <128 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hif0", "hif1", "hif2", - "hif3", "hif4", "hif5", "hif6", "hif7", - "hif8", "link"; - port-id = <1>; - gop-port-id = <2>; - status = "disabled"; - }; - - CP110_LABEL(eth2): eth2 { - interrupts = <41 IRQ_TYPE_LEVEL_HIGH>, - <45 IRQ_TYPE_LEVEL_HIGH>, - <49 IRQ_TYPE_LEVEL_HIGH>, - <53 IRQ_TYPE_LEVEL_HIGH>, - <57 IRQ_TYPE_LEVEL_HIGH>, - <61 IRQ_TYPE_LEVEL_HIGH>, - <65 IRQ_TYPE_LEVEL_HIGH>, - <69 IRQ_TYPE_LEVEL_HIGH>, - <73 IRQ_TYPE_LEVEL_HIGH>, - <127 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hif0", "hif1", "hif2", - "hif3", "hif4", "hif5", "hif6", "hif7", - "hif8", "link"; - port-id = <2>; - gop-port-id = <3>; - status = "disabled"; - }; - }; - - CP110_LABEL(comphy): phy@120000 { - compatible = "marvell,comphy-cp110"; - reg = <0x120000 0x6000>; - marvell,system-controller = <&CP110_LABEL(syscon0)>; - clocks = <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>, - <&CP110_LABEL(clk) 1 18>; - clock-names = "mg_clk", "mg_core_clk", "axi_clk"; - #address-cells = <1>; - #size-cells = <0>; - - CP110_LABEL(comphy0): phy@0 { - reg = <0>; - #phy-cells = <1>; - }; - - CP110_LABEL(comphy1): phy@1 { - reg = <1>; - #phy-cells = <1>; - }; - - CP110_LABEL(comphy2): phy@2 { - reg = <2>; - #phy-cells = <1>; - }; - - CP110_LABEL(comphy3): phy@3 { - reg = <3>; - #phy-cells = <1>; - }; - - CP110_LABEL(comphy4): phy@4 { - reg = <4>; - #phy-cells = <1>; - }; - - CP110_LABEL(comphy5): phy@5 { - reg = <5>; - #phy-cells = <1>; - }; - }; - - CP110_LABEL(mdio): mdio@12a200 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,orion-mdio"; - reg = <0x12a200 0x10>; - clocks = <&CP110_LABEL(clk) 1 9>, <&CP110_LABEL(clk) 1 5>, - <&CP110_LABEL(clk) 1 6>, <&CP110_LABEL(clk) 1 18>; - status = "disabled"; - }; - - CP110_LABEL(xmdio): mdio@12a600 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,xmdio"; - reg = <0x12a600 0x10>; - clocks = <&CP110_LABEL(clk) 1 5>, - <&CP110_LABEL(clk) 1 6>, <&CP110_LABEL(clk) 1 18>; - status = "disabled"; - }; - - CP110_LABEL(icu): interrupt-controller@1e0000 { - compatible = "marvell,cp110-icu"; - reg = <0x1e0000 0x440>; - #address-cells = <1>; - #size-cells = <1>; - - CP110_LABEL(icu_nsr): interrupt-controller@10 { - compatible = "marvell,cp110-icu-nsr"; - reg = <0x10 0x20>; - #interrupt-cells = <2>; - interrupt-controller; - msi-parent = <&gicp>; - }; - - CP110_LABEL(icu_sei): interrupt-controller@50 { - compatible = "marvell,cp110-icu-sei"; - reg = <0x50 0x10>; - #interrupt-cells = <2>; - interrupt-controller; - msi-parent = <&sei>; - }; - }; - - CP110_LABEL(rtc): rtc@284000 { - compatible = "marvell,armada-8k-rtc"; - reg = <0x284000 0x20>, <0x284080 0x24>; - reg-names = "rtc", "rtc-soc"; - interrupts = <77 IRQ_TYPE_LEVEL_HIGH>; - }; - - CP110_LABEL(syscon0): system-controller@440000 { - compatible = "syscon", "simple-mfd"; - reg = <0x440000 0x2000>; - - CP110_LABEL(clk): clock { - compatible = "marvell,cp110-clock"; - #clock-cells = <2>; - }; - - CP110_LABEL(gpio1): gpio@100 { - compatible = "marvell,armada-8k-gpio"; - offset = <0x100>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>; - interrupt-controller; - interrupts = <86 IRQ_TYPE_LEVEL_HIGH>, - <85 IRQ_TYPE_LEVEL_HIGH>, - <84 IRQ_TYPE_LEVEL_HIGH>, - <83 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <2>; - status = "disabled"; - }; - - CP110_LABEL(gpio2): gpio@140 { - compatible = "marvell,armada-8k-gpio"; - offset = <0x140>; - ngpios = <31>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&CP110_LABEL(pinctrl) 0 32 31>; - interrupt-controller; - interrupts = <82 IRQ_TYPE_LEVEL_HIGH>, - <81 IRQ_TYPE_LEVEL_HIGH>, - <80 IRQ_TYPE_LEVEL_HIGH>, - <79 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <2>; - status = "disabled"; - }; - }; - - CP110_LABEL(syscon1): system-controller@400000 { - compatible = "syscon", "simple-mfd"; - reg = <0x400000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - - CP110_LABEL(thermal): thermal-sensor@70 { - compatible = "marvell,armada-cp110-thermal"; - reg = <0x70 0x10>; - interrupts-extended = - <&CP110_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>; - #thermal-sensor-cells = <1>; - }; - }; - - CP110_LABEL(usb3_0): usb3@500000 { - compatible = "marvell,armada-8k-xhci", - "generic-xhci"; - reg = <0x500000 0x4000>; - dma-coherent; - interrupts = <106 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 22>, - <&CP110_LABEL(clk) 1 16>; - status = "disabled"; - }; - - CP110_LABEL(usb3_1): usb3@510000 { - compatible = "marvell,armada-8k-xhci", - "generic-xhci"; - reg = <0x510000 0x4000>; - dma-coherent; - interrupts = <105 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 23>, - <&CP110_LABEL(clk) 1 16>; - status = "disabled"; - }; - - CP110_LABEL(sata0): sata@540000 { - compatible = "marvell,armada-8k-ahci", - "generic-ahci"; - reg = <0x540000 0x30000>; - dma-coherent; - interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CP110_LABEL(clk) 1 15>, - <&CP110_LABEL(clk) 1 16>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata-port@0 { - reg = <0>; - }; - - sata-port@1 { - reg = <1>; - }; - }; - - CP110_LABEL(xor0): xor@6a0000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>; - dma-coherent; - msi-parent = <&gic_v2m0>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 8>, - <&CP110_LABEL(clk) 1 14>; - }; - - CP110_LABEL(xor1): xor@6c0000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>; - dma-coherent; - msi-parent = <&gic_v2m0>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 7>, - <&CP110_LABEL(clk) 1 14>; - }; - - CP110_LABEL(spi0): spi@700600 { - compatible = "marvell,armada-380-spi"; - reg = <0x700600 0x50>; - #address-cells = <0x1>; - #size-cells = <0x0>; - clock-names = "core", "axi"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(spi1): spi@700680 { - compatible = "marvell,armada-380-spi"; - reg = <0x700680 0x50>; - #address-cells = <1>; - #size-cells = <0>; - clock-names = "core", "axi"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(i2c0): i2c@701000 { - compatible = "marvell,mv78230-i2c"; - reg = <0x701000 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <120 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(i2c1): i2c@701100 { - compatible = "marvell,mv78230-i2c"; - reg = <0x701100 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <121 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(uart0): serial@702000 { - compatible = "snps,dw-apb-uart"; - reg = <0x702000 0x100>; - reg-shift = <2>; - interrupts = <122 IRQ_TYPE_LEVEL_HIGH>; - reg-io-width = <1>; - clock-names = "baudclk", "apb_pclk"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(uart1): serial@702100 { - compatible = "snps,dw-apb-uart"; - reg = <0x702100 0x100>; - reg-shift = <2>; - interrupts = <123 IRQ_TYPE_LEVEL_HIGH>; - reg-io-width = <1>; - clock-names = "baudclk", "apb_pclk"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(uart2): serial@702200 { - compatible = "snps,dw-apb-uart"; - reg = <0x702200 0x100>; - reg-shift = <2>; - interrupts = <124 IRQ_TYPE_LEVEL_HIGH>; - reg-io-width = <1>; - clock-names = "baudclk", "apb_pclk"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(uart3): serial@702300 { - compatible = "snps,dw-apb-uart"; - reg = <0x702300 0x100>; - reg-shift = <2>; - interrupts = <125 IRQ_TYPE_LEVEL_HIGH>; - reg-io-width = <1>; - clock-names = "baudclk", "apb_pclk"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(nand_controller): nand@720000 { - /* - * Due to the limitation of the pins available - * this controller is only usable on the CPM - * for A7K and on the CPS for A8K. - */ - compatible = "marvell,armada-8k-nand-controller", - "marvell,armada370-nand-controller"; - reg = <0x720000 0x54>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <115 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 2>, - <&CP110_LABEL(clk) 1 17>; - marvell,system-controller = <&CP110_LABEL(syscon0)>; - status = "disabled"; - }; - - CP110_LABEL(trng): trng@760000 { - compatible = "marvell,armada-8k-rng", - "inside-secure,safexcel-eip76"; - reg = <0x760000 0x7d>; - interrupts = <95 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 25>, - <&CP110_LABEL(clk) 1 17>; - status = "okay"; - }; - - CP110_LABEL(sdhci0): sdhci@780000 { - compatible = "marvell,armada-cp110-sdhci"; - reg = <0x780000 0x300>; - interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "axi"; - clocks = <&CP110_LABEL(clk) 1 4>, <&CP110_LABEL(clk) 1 18>; - dma-coherent; - status = "disabled"; - }; - - CP110_LABEL(crypto): crypto@800000 { - compatible = "inside-secure,safexcel-eip197b"; - reg = <0x800000 0x200000>; - interrupts = <87 IRQ_TYPE_LEVEL_HIGH>, - <88 IRQ_TYPE_LEVEL_HIGH>, - <89 IRQ_TYPE_LEVEL_HIGH>, - <90 IRQ_TYPE_LEVEL_HIGH>, - <91 IRQ_TYPE_LEVEL_HIGH>, - <92 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "mem", "ring0", "ring1", - "ring2", "ring3", "eip"; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 26>, - <&CP110_LABEL(clk) 1 17>; - dma-coherent; - }; - }; - - CP110_LABEL(pcie0): pcie@CP110_PCIE0_BASE { - compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; - reg = <0 ADDRESSIFY(CP110_PCIE0_BASE) 0 0x10000>, - <0 CP110_PCIEx_CONF_BASE(0) 0 0x80000>; - reg-names = "ctrl", "config"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - dma-coherent; - msi-parent = <&gic_v2m0>; - - bus-range = <0 0xff>; - ranges = - /* downstream I/O */ - <0x81000000 0 CP110_PCIEx_IO_BASE(0) 0 CP110_PCIEx_IO_BASE(0) 0 0x10000 - /* non-prefetchable memory */ - 0x82000000 0 CP110_PCIEx_MEM_BASE(0) 0 CP110_PCIEx_MEM_BASE(0) 0 0xf00000>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; - num-lanes = <1>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 13>, <&CP110_LABEL(clk) 1 14>; - status = "disabled"; - }; - - CP110_LABEL(pcie1): pcie@CP110_PCIE1_BASE { - compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; - reg = <0 ADDRESSIFY(CP110_PCIE1_BASE) 0 0x10000>, - <0 CP110_PCIEx_CONF_BASE(1) 0 0x80000>; - reg-names = "ctrl", "config"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - dma-coherent; - msi-parent = <&gic_v2m0>; - - bus-range = <0 0xff>; - ranges = - /* downstream I/O */ - <0x81000000 0 CP110_PCIEx_IO_BASE(1) 0 CP110_PCIEx_IO_BASE(1) 0 0x10000 - /* non-prefetchable memory */ - 0x82000000 0 CP110_PCIEx_MEM_BASE(1) 0 CP110_PCIEx_MEM_BASE(1) 0 0xf00000>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; - - num-lanes = <1>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 11>, <&CP110_LABEL(clk) 1 14>; - status = "disabled"; - }; - - CP110_LABEL(pcie2): pcie@CP110_PCIE2_BASE { - compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; - reg = <0 ADDRESSIFY(CP110_PCIE2_BASE) 0 0x10000>, - <0 CP110_PCIEx_CONF_BASE(2) 0 0x80000>; - reg-names = "ctrl", "config"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - dma-coherent; - msi-parent = <&gic_v2m0>; - - bus-range = <0 0xff>; - ranges = - /* downstream I/O */ - <0x81000000 0 CP110_PCIEx_IO_BASE(2) 0 CP110_PCIEx_IO_BASE(2) 0 0x10000 - /* non-prefetchable memory */ - 0x82000000 0 CP110_PCIEx_MEM_BASE(2) 0 CP110_PCIEx_MEM_BASE(2) 0 0xf00000>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; - - num-lanes = <1>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 12>, <&CP110_LABEL(clk) 1 14>; - status = "disabled"; - }; -}; +#undef CP11X_TYPE diff --git a/arch/arm64/boot/dts/marvell/armada-cp115.dtsi b/arch/arm64/boot/dts/marvell/armada-cp115.dtsi new file mode 100644 index 000000000000..1d0a9653e681 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-cp115.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell Technology Group Ltd. + * + * Device Tree file for Marvell Armada CP115. + */ + +#define CP11X_TYPE cp115 + +#include "armada-cp11x.dtsi" + +#undef CP11X_TYPE diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi new file mode 100644 index 000000000000..9dcf16beabf5 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi @@ -0,0 +1,568 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * + * Device Tree file for Marvell Armada CP11x. + */ + +#include <dt-bindings/interrupt-controller/mvebu-icu.h> +#include <dt-bindings/thermal/thermal.h> + +#include "armada-common.dtsi" + +#define CP11X_PCIEx_CONF_BASE(iface) (CP11X_PCIEx_MEM_BASE(iface) + CP11X_PCIEx_MEM_SIZE(iface)) + +/ { + /* + * The contents of the node are defined below, in order to + * save one indentation level + */ + CP11X_NAME: CP11X_NAME { }; + + /* + * CPs only have one sensor in the thermal IC. + * + * The cooling maps are empty as there are no cooling devices. + */ + thermal-zones { + CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(thermal-ic) { + polling-delay-passive = <0>; /* Interrupt driven */ + polling-delay = <0>; /* Interrupt driven */ + + thermal-sensors = <&CP11X_LABEL(thermal) 0>; + + trips { + CP11X_LABEL(crit): crit { + temperature = <100000>; /* mC degrees */ + hysteresis = <2000>; /* mC degrees */ + type = "critical"; + }; + }; + + cooling-maps { }; + }; + }; +}; + +&CP11X_NAME { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + interrupt-parent = <&CP11X_LABEL(icu_nsr)>; + ranges; + + config-space@CP11X_BASE { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x0 0x0 ADDRESSIFY(CP11X_BASE) 0x2000000>; + + CP11X_LABEL(ethernet): ethernet@0 { + compatible = "marvell,armada-7k-pp22"; + reg = <0x0 0x100000>, <0x129000 0xb000>; + clocks = <&CP11X_LABEL(clk) 1 3>, <&CP11X_LABEL(clk) 1 9>, + <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>, + <&CP11X_LABEL(clk) 1 18>; + clock-names = "pp_clk", "gop_clk", + "mg_clk", "mg_core_clk", "axi_clk"; + marvell,system-controller = <&CP11X_LABEL(syscon0)>; + status = "disabled"; + dma-coherent; + + CP11X_LABEL(eth0): eth0 { + interrupts = <39 IRQ_TYPE_LEVEL_HIGH>, + <43 IRQ_TYPE_LEVEL_HIGH>, + <47 IRQ_TYPE_LEVEL_HIGH>, + <51 IRQ_TYPE_LEVEL_HIGH>, + <55 IRQ_TYPE_LEVEL_HIGH>, + <59 IRQ_TYPE_LEVEL_HIGH>, + <63 IRQ_TYPE_LEVEL_HIGH>, + <67 IRQ_TYPE_LEVEL_HIGH>, + <71 IRQ_TYPE_LEVEL_HIGH>, + <129 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hif0", "hif1", "hif2", + "hif3", "hif4", "hif5", "hif6", "hif7", + "hif8", "link"; + port-id = <0>; + gop-port-id = <0>; + status = "disabled"; + }; + + CP11X_LABEL(eth1): eth1 { + interrupts = <40 IRQ_TYPE_LEVEL_HIGH>, + <44 IRQ_TYPE_LEVEL_HIGH>, + <48 IRQ_TYPE_LEVEL_HIGH>, + <52 IRQ_TYPE_LEVEL_HIGH>, + <56 IRQ_TYPE_LEVEL_HIGH>, + <60 IRQ_TYPE_LEVEL_HIGH>, + <64 IRQ_TYPE_LEVEL_HIGH>, + <68 IRQ_TYPE_LEVEL_HIGH>, + <72 IRQ_TYPE_LEVEL_HIGH>, + <128 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hif0", "hif1", "hif2", + "hif3", "hif4", "hif5", "hif6", "hif7", + "hif8", "link"; + port-id = <1>; + gop-port-id = <2>; + status = "disabled"; + }; + + CP11X_LABEL(eth2): eth2 { + interrupts = <41 IRQ_TYPE_LEVEL_HIGH>, + <45 IRQ_TYPE_LEVEL_HIGH>, + <49 IRQ_TYPE_LEVEL_HIGH>, + <53 IRQ_TYPE_LEVEL_HIGH>, + <57 IRQ_TYPE_LEVEL_HIGH>, + <61 IRQ_TYPE_LEVEL_HIGH>, + <65 IRQ_TYPE_LEVEL_HIGH>, + <69 IRQ_TYPE_LEVEL_HIGH>, + <73 IRQ_TYPE_LEVEL_HIGH>, + <127 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hif0", "hif1", "hif2", + "hif3", "hif4", "hif5", "hif6", "hif7", + "hif8", "link"; + port-id = <2>; + gop-port-id = <3>; + status = "disabled"; + }; + }; + + CP11X_LABEL(comphy): phy@120000 { + compatible = "marvell,comphy-cp110"; + reg = <0x120000 0x6000>; + marvell,system-controller = <&CP11X_LABEL(syscon0)>; + clocks = <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>, + <&CP11X_LABEL(clk) 1 18>; + clock-names = "mg_clk", "mg_core_clk", "axi_clk"; + #address-cells = <1>; + #size-cells = <0>; + + CP11X_LABEL(comphy0): phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + CP11X_LABEL(comphy1): phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + + CP11X_LABEL(comphy2): phy@2 { + reg = <2>; + #phy-cells = <1>; + }; + + CP11X_LABEL(comphy3): phy@3 { + reg = <3>; + #phy-cells = <1>; + }; + + CP11X_LABEL(comphy4): phy@4 { + reg = <4>; + #phy-cells = <1>; + }; + + CP11X_LABEL(comphy5): phy@5 { + reg = <5>; + #phy-cells = <1>; + }; + }; + + CP11X_LABEL(mdio): mdio@12a200 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,orion-mdio"; + reg = <0x12a200 0x10>; + clocks = <&CP11X_LABEL(clk) 1 9>, <&CP11X_LABEL(clk) 1 5>, + <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>; + status = "disabled"; + }; + + CP11X_LABEL(xmdio): mdio@12a600 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,xmdio"; + reg = <0x12a600 0x10>; + clocks = <&CP11X_LABEL(clk) 1 5>, + <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>; + status = "disabled"; + }; + + CP11X_LABEL(icu): interrupt-controller@1e0000 { + compatible = "marvell,cp110-icu"; + reg = <0x1e0000 0x440>; + #address-cells = <1>; + #size-cells = <1>; + + CP11X_LABEL(icu_nsr): interrupt-controller@10 { + compatible = "marvell,cp110-icu-nsr"; + reg = <0x10 0x20>; + #interrupt-cells = <2>; + interrupt-controller; + msi-parent = <&gicp>; + }; + + CP11X_LABEL(icu_sei): interrupt-controller@50 { + compatible = "marvell,cp110-icu-sei"; + reg = <0x50 0x10>; + #interrupt-cells = <2>; + interrupt-controller; + msi-parent = <&sei>; + }; + }; + + CP11X_LABEL(rtc): rtc@284000 { + compatible = "marvell,armada-8k-rtc"; + reg = <0x284000 0x20>, <0x284080 0x24>; + reg-names = "rtc", "rtc-soc"; + interrupts = <77 IRQ_TYPE_LEVEL_HIGH>; + }; + + CP11X_LABEL(syscon0): system-controller@440000 { + compatible = "syscon", "simple-mfd"; + reg = <0x440000 0x2000>; + + CP11X_LABEL(clk): clock { + compatible = "marvell,cp110-clock"; + #clock-cells = <2>; + }; + + CP11X_LABEL(gpio1): gpio@100 { + compatible = "marvell,armada-8k-gpio"; + offset = <0x100>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&CP11X_LABEL(pinctrl) 0 0 32>; + interrupt-controller; + interrupts = <86 IRQ_TYPE_LEVEL_HIGH>, + <85 IRQ_TYPE_LEVEL_HIGH>, + <84 IRQ_TYPE_LEVEL_HIGH>, + <83 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + status = "disabled"; + }; + + CP11X_LABEL(gpio2): gpio@140 { + compatible = "marvell,armada-8k-gpio"; + offset = <0x140>; + ngpios = <31>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&CP11X_LABEL(pinctrl) 0 32 31>; + interrupt-controller; + interrupts = <82 IRQ_TYPE_LEVEL_HIGH>, + <81 IRQ_TYPE_LEVEL_HIGH>, + <80 IRQ_TYPE_LEVEL_HIGH>, + <79 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + status = "disabled"; + }; + }; + + CP11X_LABEL(syscon1): system-controller@400000 { + compatible = "syscon", "simple-mfd"; + reg = <0x400000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + CP11X_LABEL(thermal): thermal-sensor@70 { + compatible = "marvell,armada-cp110-thermal"; + reg = <0x70 0x10>; + interrupts-extended = + <&CP11X_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>; + #thermal-sensor-cells = <1>; + }; + }; + + CP11X_LABEL(usb3_0): usb3@500000 { + compatible = "marvell,armada-8k-xhci", + "generic-xhci"; + reg = <0x500000 0x4000>; + dma-coherent; + interrupts = <106 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 22>, + <&CP11X_LABEL(clk) 1 16>; + status = "disabled"; + }; + + CP11X_LABEL(usb3_1): usb3@510000 { + compatible = "marvell,armada-8k-xhci", + "generic-xhci"; + reg = <0x510000 0x4000>; + dma-coherent; + interrupts = <105 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 23>, + <&CP11X_LABEL(clk) 1 16>; + status = "disabled"; + }; + + CP11X_LABEL(sata0): sata@540000 { + compatible = "marvell,armada-8k-ahci", + "generic-ahci"; + reg = <0x540000 0x30000>; + dma-coherent; + interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CP11X_LABEL(clk) 1 15>, + <&CP11X_LABEL(clk) 1 16>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata-port@0 { + reg = <0>; + }; + + sata-port@1 { + reg = <1>; + }; + }; + + CP11X_LABEL(xor0): xor@6a0000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>; + dma-coherent; + msi-parent = <&gic_v2m0>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 8>, + <&CP11X_LABEL(clk) 1 14>; + }; + + CP11X_LABEL(xor1): xor@6c0000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>; + dma-coherent; + msi-parent = <&gic_v2m0>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 7>, + <&CP11X_LABEL(clk) 1 14>; + }; + + CP11X_LABEL(spi0): spi@700600 { + compatible = "marvell,armada-380-spi"; + reg = <0x700600 0x50>; + #address-cells = <0x1>; + #size-cells = <0x0>; + clock-names = "core", "axi"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(spi1): spi@700680 { + compatible = "marvell,armada-380-spi"; + reg = <0x700680 0x50>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "core", "axi"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(i2c0): i2c@701000 { + compatible = "marvell,mv78230-i2c"; + reg = <0x701000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <120 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(i2c1): i2c@701100 { + compatible = "marvell,mv78230-i2c"; + reg = <0x701100 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <121 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(uart0): serial@702000 { + compatible = "snps,dw-apb-uart"; + reg = <0x702000 0x100>; + reg-shift = <2>; + interrupts = <122 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(uart1): serial@702100 { + compatible = "snps,dw-apb-uart"; + reg = <0x702100 0x100>; + reg-shift = <2>; + interrupts = <123 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(uart2): serial@702200 { + compatible = "snps,dw-apb-uart"; + reg = <0x702200 0x100>; + reg-shift = <2>; + interrupts = <124 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(uart3): serial@702300 { + compatible = "snps,dw-apb-uart"; + reg = <0x702300 0x100>; + reg-shift = <2>; + interrupts = <125 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(nand_controller): nand@720000 { + /* + * Due to the limitation of the pins available + * this controller is only usable on the CPM + * for A7K and on the CPS for A8K. + */ + compatible = "marvell,armada-8k-nand-controller", + "marvell,armada370-nand-controller"; + reg = <0x720000 0x54>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <115 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 2>, + <&CP11X_LABEL(clk) 1 17>; + marvell,system-controller = <&CP11X_LABEL(syscon0)>; + status = "disabled"; + }; + + CP11X_LABEL(trng): trng@760000 { + compatible = "marvell,armada-8k-rng", + "inside-secure,safexcel-eip76"; + reg = <0x760000 0x7d>; + interrupts = <95 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 25>, + <&CP11X_LABEL(clk) 1 17>; + status = "okay"; + }; + + CP11X_LABEL(sdhci0): sdhci@780000 { + compatible = "marvell,armada-cp110-sdhci"; + reg = <0x780000 0x300>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "axi"; + clocks = <&CP11X_LABEL(clk) 1 4>, <&CP11X_LABEL(clk) 1 18>; + dma-coherent; + status = "disabled"; + }; + + CP11X_LABEL(crypto): crypto@800000 { + compatible = "inside-secure,safexcel-eip197b"; + reg = <0x800000 0x200000>; + interrupts = <87 IRQ_TYPE_LEVEL_HIGH>, + <88 IRQ_TYPE_LEVEL_HIGH>, + <89 IRQ_TYPE_LEVEL_HIGH>, + <90 IRQ_TYPE_LEVEL_HIGH>, + <91 IRQ_TYPE_LEVEL_HIGH>, + <92 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mem", "ring0", "ring1", + "ring2", "ring3", "eip"; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 26>, + <&CP11X_LABEL(clk) 1 17>; + dma-coherent; + }; + }; + + CP11X_LABEL(pcie0): pcie@CP11X_PCIE0_BASE { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 ADDRESSIFY(CP11X_PCIE0_BASE) 0 0x10000>, + <0 CP11X_PCIEx_CONF_BASE(0) 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + msi-parent = <&gic_v2m0>; + + bus-range = <0 0xff>; + /* non-prefetchable memory */ + ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_SIZE(0)>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; + num-lanes = <1>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 13>, <&CP11X_LABEL(clk) 1 14>; + status = "disabled"; + }; + + CP11X_LABEL(pcie1): pcie@CP11X_PCIE1_BASE { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 ADDRESSIFY(CP11X_PCIE1_BASE) 0 0x10000>, + <0 CP11X_PCIEx_CONF_BASE(1) 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + msi-parent = <&gic_v2m0>; + + bus-range = <0 0xff>; + /* non-prefetchable memory */ + ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_SIZE(1)>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; + + num-lanes = <1>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 11>, <&CP11X_LABEL(clk) 1 14>; + status = "disabled"; + }; + + CP11X_LABEL(pcie2): pcie@CP11X_PCIE2_BASE { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 ADDRESSIFY(CP11X_PCIE2_BASE) 0 0x10000>, + <0 CP11X_PCIEx_CONF_BASE(2) 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + msi-parent = <&gic_v2m0>; + + bus-range = <0 0xff>; + /* non-prefetchable memory */ + ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_SIZE(2)>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; + + num-lanes = <1>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 12>, <&CP11X_LABEL(clk) 1 14>; + status = "disabled"; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dts b/arch/arm64/boot/dts/marvell/cn9130-db.dts new file mode 100644 index 000000000000..ce49a70d88a0 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9130-db.dts @@ -0,0 +1,403 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9130-DB board. + */ + +#include "cn9130.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Marvell Armada CN9130-DB"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + gpio1 = &cp0_gpio1; + gpio2 = &cp0_gpio2; + i2c0 = &cp0_i2c0; + ethernet0 = &cp0_eth0; + ethernet1 = &cp0_eth1; + ethernet2 = &cp0_eth2; + spi1 = &cp0_spi0; + spi2 = &cp0_spi1; + }; + + memory@00000000 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + ap0_reg_sd_vccq: ap0_sd_vccq@0 { + compatible = "regulator-gpio"; + regulator-name = "ap0_sd_vccq"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&expander0 8 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 3300000 0x0>; + }; + + cp0_reg_usb3_vbus0: cp0_usb3_vbus@0 { + compatible = "regulator-fixed"; + regulator-name = "cp0-xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&expander0 0 GPIO_ACTIVE_HIGH>; + }; + + cp0_usb3_0_phy0: cp0_usb3_phy@0 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp0_reg_usb3_vbus0>; + }; + + cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 { + compatible = "regulator-fixed"; + regulator-name = "cp0-xhci1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&expander0 1 GPIO_ACTIVE_HIGH>; + }; + + cp0_usb3_0_phy1: cp0_usb3_phy@1 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp0_reg_usb3_vbus1>; + }; + + cp0_reg_sd_vccq: cp0_sd_vccq@0 { + compatible = "regulator-gpio"; + regulator-name = "cp0_sd_vccq"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&expander0 15 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 + 3300000 0x0>; + }; + + cp0_reg_sd_vcc: cp0_sd_vcc@0 { + compatible = "regulator-fixed"; + regulator-name = "cp0_sd_vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&expander0 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + cp0_sfp_eth0: sfp-eth@0 { + compatible = "sff,sfp"; + i2c-bus = <&cp0_sfpp0_i2c>; + los-gpio = <&cp0_module_expander1 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp0_module_expander1 10 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp0_module_expander1 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp0_module_expander1 8 GPIO_ACTIVE_HIGH>; + /* + * SFP cages are unconnected on early PCBs because of an the I2C + * lanes not being connected. Prevent the port for being + * unusable by disabling the SFP node. + */ + status = "disabled"; + }; +}; + +&uart0 { + status = "okay"; +}; + +/* on-board eMMC - U9 */ +&ap_sdhci0 { + pinctrl-names = "default"; + bus-width = <8>; + vqmmc-supply = <&ap0_reg_sd_vccq>; + status = "okay"; +}; + +&cp0_crypto { + status = "disabled"; +}; + +&cp0_ethernet { + status = "okay"; +}; + +/* SLM-1521-V2, CON9 */ +&cp0_eth0 { + status = "disabled"; + phy-mode = "10gbase-kr"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy4 0>; + managed = "in-band-status"; + sfp = <&cp0_sfp_eth0>; +}; + +/* CON56 */ +&cp0_eth1 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; +}; + +/* CON57 */ +&cp0_eth2 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; +}; + +&cp0_gpio1 { + status = "okay"; +}; + +&cp0_gpio2 { + status = "okay"; +}; + +&cp0_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + clock-frequency = <100000>; + + /* U36 */ + expander0: pca953x@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x21>; + status = "okay"; + }; + + /* U42 */ + eeprom0: eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <0x20>; + }; + + /* U38 */ + eeprom1: eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + pagesize = <0x20>; + }; +}; + +&cp0_i2c1 { + status = "okay"; + clock-frequency = <100000>; + + /* SLM-1521-V2 - U3 */ + i2c-mux@72 { /* verify address - depends on dpr */ + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + cp0_sfpp0_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* U12 */ + cp0_module_expander1: pca9555@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x21>; + }; + + }; + }; +}; + +&cp0_mdio { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +/* U54 */ +&cp0_nand_controller { + pinctrl-names = "default"; + pinctrl-0 = <&nand_pins &nand_rb>; + + nand@0 { + reg = <0>; + label = "main-storage"; + nand-rb = <0>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x200000>; + }; + partition@200000 { + label = "Linux"; + reg = <0x200000 0xd00000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; + }; + }; +}; + +/* SLM-1521-V2, CON6 */ +&cp0_pcie0 { + status = "okay"; + num-lanes = <4>; + num-viewport = <8>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy0 0 + &cp0_comphy1 0 + &cp0_comphy2 0 + &cp0_comphy3 0>; +}; + +&cp0_sata0 { + status = "okay"; + + /* SLM-1521-V2, CON2 */ + sata-port@1 { + status = "okay"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy5 1>; + }; +}; + +/* CON 28 */ +&cp0_sdhci0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sdhci_pins + &cp0_sdhci_cd_pins>; + bus-width = <4>; + cd-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>; + no-1-8-v; + vqmmc-supply = <&cp0_reg_sd_vccq>; + vmmc-supply = <&cp0_reg_sd_vcc>; +}; + +/* U55 */ +&cp0_spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_spi0_pins>; + reg = <0x700680 0x50>; + + spi-flash@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + /* On-board MUX does not allow higher frequencies */ + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot-0"; + reg = <0x0 0x200000>; + }; + + partition@400000 { + label = "Filesystem-0"; + reg = <0x200000 0xe00000>; + }; + }; + }; +}; + +&cp0_syscon0 { + cp0_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp0_i2c0_pins: cp0-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp0_i2c1_pins: cp0-i2c-pins-1 { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 { + marvell,pins = "mpp0", "mpp1", "mpp2", + "mpp3", "mpp4", "mpp5", + "mpp6", "mpp7", "mpp8", + "mpp9", "mpp10", "mpp11"; + marvell,function = "ge0"; + }; + cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 { + marvell,pins = "mpp44", "mpp45", "mpp46", + "mpp47", "mpp48", "mpp49", + "mpp50", "mpp51", "mpp52", + "mpp53", "mpp54", "mpp55"; + marvell,function = "ge1"; + }; + cp0_sdhci_cd_pins: cp0-sdhci-cd-pins-0 { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + cp0_sdhci_pins: cp0-sdhi-pins-0 { + marvell,pins = "mpp56", "mpp57", "mpp58", + "mpp59", "mpp60", "mpp61"; + marvell,function = "sdio"; + }; + cp0_spi0_pins: cp0-spi-pins-0 { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + nand_pins: nand-pins { + marvell,pins = "mpp15", "mpp16", "mpp17", "mpp18", + "mpp19", "mpp20", "mpp21", "mpp22", + "mpp23", "mpp24", "mpp25", "mpp26", + "mpp27"; + marvell,function = "dev"; + }; + nand_rb: nand-rb { + marvell,pins = "mpp13"; + marvell,function = "nf"; + }; + }; +}; + +&cp0_usb3_0 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy0>; + phy-names = "usb"; +}; + +&cp0_usb3_1 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy1>; + phy-names = "usb"; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9130.dtsi b/arch/arm64/boot/dts/marvell/cn9130.dtsi new file mode 100644 index 000000000000..a2b7e5ec979d --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9130.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9130 SoC. + */ + +#include "armada-ap807-quad.dtsi" + +/ { + model = "Marvell Armada CN9130 SoC"; + compatible = "marvell,cn9130", "marvell,armada-ap807-quad", + "marvell,armada-ap807"; +}; + +/* + * Instantiate the internal CP115 + */ + +#define CP11X_NAME cp0 +#define CP11X_BASE f2000000 +#define CP11X_PCIEx_MEM_BASE(iface) ((iface == 0) ? 0xc0000000 : \ + 0xe0000000 + ((iface - 1) * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) ((iface == 0) ? 0x1ff00000 : 0xf00000) +#define CP11X_PCIE0_BASE f2600000 +#define CP11X_PCIE1_BASE f2620000 +#define CP11X_PCIE2_BASE f2640000 + +#include "armada-cp115.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE diff --git a/arch/arm64/boot/dts/marvell/cn9131-db.dts b/arch/arm64/boot/dts/marvell/cn9131-db.dts new file mode 100644 index 000000000000..3c975f98b2a3 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9131-db.dts @@ -0,0 +1,202 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9131-DB board. + */ + +#include "cn9130-db.dts" + +/ { + model = "Marvell Armada CN9131-DB"; + compatible = "marvell,cn9131", "marvell,cn9130", + "marvell,armada-ap807-quad", "marvell,armada-ap807"; + + aliases { + gpio3 = &cp1_gpio1; + gpio4 = &cp1_gpio2; + ethernet3 = &cp1_eth0; + ethernet4 = &cp1_eth1; + }; + + cp1_reg_usb3_vbus0: cp1_usb3_vbus@0 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_xhci0_vbus_pins>; + regulator-name = "cp1-xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&cp1_gpio1 3 GPIO_ACTIVE_HIGH>; + }; + + cp1_usb3_0_phy0: cp1_usb3_phy0 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp1_reg_usb3_vbus0>; + }; + + cp1_sfp_eth1: sfp-eth1 { + compatible = "sff,sfp"; + i2c-bus = <&cp1_i2c0>; + los-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp1_gpio1 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_sfp_pins>; + /* + * SFP cages are unconnected on early PCBs because of an the I2C + * lanes not being connected. Prevent the port for being + * unusable by disabling the SFP node. + */ + status = "disabled"; + }; +}; + +/* + * Instantiate the first slave CP115 + */ + +#define CP11X_NAME cp1 +#define CP11X_BASE f4000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f4600000 +#define CP11X_PCIE1_BASE f4620000 +#define CP11X_PCIE2_BASE f4640000 + +#include "armada-cp115.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE + +&cp1_crypto { + status = "disabled"; +}; + +&cp1_ethernet { + status = "okay"; +}; + +/* CON50 */ +&cp1_eth0 { + status = "disabled"; + phy-mode = "10gbase-kr"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy4 0>; + managed = "in-band-status"; + sfp = <&cp1_sfp_eth1>; +}; + +&cp1_gpio1 { + status = "okay"; +}; + +&cp1_gpio2 { + status = "okay"; +}; + +&cp1_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_i2c0_pins>; + clock-frequency = <100000>; +}; + +/* CON40 */ +&cp1_pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp1_pcie_reset_pins>; + num-lanes = <2>; + num-viewport = <8>; + marvell,reset-gpio = <&cp1_gpio1 0 GPIO_ACTIVE_HIGH>; + status = "okay"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy0 0 + &cp1_comphy1 0>; +}; + +&cp1_sata0 { + status = "okay"; + + /* CON32 */ + sata-port@1 { + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy5 1>; + }; +}; + +/* U24 */ +&cp1_spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_spi0_pins>; + reg = <0x700680 0x50>; + + spi-flash@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + /* On-board MUX does not allow higher frequencies */ + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot-1"; + reg = <0x0 0x200000>; + }; + + partition@400000 { + label = "Filesystem-1"; + reg = <0x200000 0xe00000>; + }; + }; + }; + +}; + +&cp1_syscon0 { + cp1_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp1_i2c0_pins: cp1-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp1_spi0_pins: cp1-spi-pins-0 { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + cp1_sfp_pins: sfp-pins { + marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11"; + marvell,function = "gpio"; + }; + cp1_pcie_reset_pins: cp1-pcie-reset-pins { + marvell,pins = "mpp0"; + marvell,function = "gpio"; + }; + }; +}; + +/* CON58 */ +&cp1_usb3_1 { + status = "okay"; + usb-phy = <&cp1_usb3_0_phy0>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy3 1>; + phy-names = "usb"; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9132-db.dts b/arch/arm64/boot/dts/marvell/cn9132-db.dts new file mode 100644 index 000000000000..4ef0df3097ca --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9132-db.dts @@ -0,0 +1,221 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9132-DB board. + */ + +#include "cn9131-db.dts" + +/ { + model = "Marvell Armada CN9132-DB"; + compatible = "marvell,cn9132", "marvell,cn9131", "marvell,cn9130", + "marvell,armada-ap807-quad", "marvell,armada-ap807"; + + aliases { + gpio5 = &cp2_gpio1; + gpio6 = &cp2_gpio2; + ethernet5 = &cp2_eth0; + }; + + cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 { + compatible = "regulator-fixed"; + regulator-name = "cp2-xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>; + }; + + cp2_usb3_0_phy0: cp2_usb3_phy0 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp2_reg_usb3_vbus0>; + }; + + cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 { + compatible = "regulator-fixed"; + regulator-name = "cp2-xhci1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>; + }; + + cp2_usb3_0_phy1: cp2_usb3_phy1 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp2_reg_usb3_vbus1>; + }; + + cp2_reg_sd_vccq: cp2_sd_vccq@0 { + compatible = "regulator-gpio"; + regulator-name = "cp2_sd_vcc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&cp2_gpio2 17 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 3300000 0x0>; + }; + + cp2_sfp_eth0: sfp-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&cp2_sfpp0_i2c>; + los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>; + /* + * SFP cages are unconnected on early PCBs because of an the I2C + * lanes not being connected. Prevent the port for being + * unusable by disabling the SFP node. + */ + status = "disabled"; + }; +}; + +/* + * Instantiate the second slave CP115 + */ + +#define CP11X_NAME cp2 +#define CP11X_BASE f6000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f6600000 +#define CP11X_PCIE1_BASE f6620000 +#define CP11X_PCIE2_BASE f6640000 + +#include "armada-cp115.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE + +&cp2_crypto { + status = "disabled"; +}; + +&cp2_ethernet { + status = "okay"; +}; + +/* SLM-1521-V2, CON9 */ +&cp2_eth0 { + status = "disabled"; + phy-mode = "10gbase-kr"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy4 0>; + managed = "in-band-status"; + sfp = <&cp2_sfp_eth0>; +}; + +&cp2_gpio1 { + status = "okay"; +}; + +&cp2_gpio2 { + status = "okay"; +}; + +&cp2_i2c0 { + clock-frequency = <100000>; + + /* SLM-1521-V2 - U3 */ + i2c-mux@72 { + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + cp2_sfpp0_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* U12 */ + cp2_module_expander1: pca9555@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x21>; + }; + }; + }; +}; + +/* SLM-1521-V2, CON6 */ +&cp2_pcie0 { + status = "okay"; + num-lanes = <2>; + num-viewport = <8>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy0 0 + &cp2_comphy1 0>; +}; + +/* SLM-1521-V2, CON8 */ +&cp2_pcie2 { + status = "okay"; + num-lanes = <1>; + num-viewport = <8>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy5 2>; +}; + +&cp2_sata0 { + status = "okay"; + + /* SLM-1521-V2, CON4 */ + sata-port@0 { + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy2 0>; + }; +}; + +/* CON 2 on SLM-1683 - microSD */ +&cp2_sdhci0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp2_sdhci_pins>; + bus-width = <4>; + cd-gpios = <&cp2_gpio2 23 GPIO_ACTIVE_LOW>; + vqmmc-supply = <&cp2_reg_sd_vccq>; +}; + +&cp2_syscon0 { + cp2_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp2_i2c0_pins: cp2-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp2_sdhci_pins: cp2-sdhi-pins-0 { + marvell,pins = "mpp56", "mpp57", "mpp58", + "mpp59", "mpp60", "mpp61"; + marvell,function = "sdio"; + }; + }; +}; + +&cp2_usb3_0 { + status = "okay"; + usb-phy = <&cp2_usb3_0_phy0>; + phy-names = "usb"; +}; + +/* SLM-1521-V2, CON11 */ +&cp2_usb3_1 { + status = "okay"; + usb-phy = <&cp2_usb3_0_phy1>; + phy-names = "usb"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy3 1>; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 97f84aa9fc6e..10b32471bc7b 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -269,6 +269,15 @@ clock-names = "spi", "wrap"; }; + systimer: timer@10017000 { + compatible = "mediatek,mt8183-timer", + "mediatek,mt6765-timer"; + reg = <0 0x10017000 0 0x1000>; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&topckgen CLK_TOP_CLK13M>; + clock-names = "clk13m"; + }; + auxadc: auxadc@11001000 { compatible = "mediatek,mt8183-auxadc", "mediatek,mt8173-auxadc"; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index bdace01561ba..f1de4ff6230a 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -115,7 +115,7 @@ }; padctl@3520000 { - status = "disabled"; + status = "okay"; avdd-pll-erefeut-supply = <&vdd_1v8_pll>; avdd-usb-supply = <&vdd_3v3_sys>; @@ -193,7 +193,7 @@ }; usb@3530000 { - status = "disabled"; + status = "okay"; phys = <&{/padctl@3520000/pads/usb2/lanes/usb2-0}>, <&{/padctl@3520000/pads/usb2/lanes/usb2-1}>, @@ -253,10 +253,14 @@ status = "disabled"; }; + /* DP on E3320 */ sor@15540000 { - status = "disabled"; + status = "okay"; + + avdd-io-hdmi-dp-supply = <&vdd_hdmi_1v05>; + vdd-hdmi-dp-pll = <&vdd_1v8_ap>; - nvidia,dpaux = <&dpaux1>; + nvidia,dpaux = <&dpaux>; }; sor@15580000 { diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 47cd831fcf44..7893d78a0fb6 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -525,6 +525,7 @@ <0x0 0x03538000 0x0 0x1000>; reg-names = "hcd", "fpci"; + iommus = <&smmu TEGRA186_SID_XUSB_HOST>; interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; @@ -1018,6 +1019,7 @@ reset-names = "vic"; power-domains = <&bpmp TEGRA186_POWER_DOMAIN_VIC>; + iommus = <&smmu TEGRA186_SID_VIC>; }; dsib: dsi@15400000 { @@ -1060,7 +1062,7 @@ }; sor1: sor@15580000 { - compatible = "nvidia,tegra186-sor1"; + compatible = "nvidia,tegra186-sor"; reg = <0x15580000 0x10000>; interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA186_CLK_SOR1>, diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi index 4c38426a6969..c7f2a20e6b02 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi @@ -8,17 +8,18 @@ compatible = "nvidia,p2888", "nvidia,tegra194"; aliases { - sdhci0 = "/cbb/sdhci@3460000"; - sdhci1 = "/cbb/sdhci@3400000"; + ethernet0 = "/cbb@0/ethernet@2490000"; + sdhci0 = "/cbb@0/sdhci@3460000"; + sdhci1 = "/cbb@0/sdhci@3400000"; serial0 = &tcu; i2c0 = "/bpmp/i2c"; - i2c1 = "/cbb/i2c@3160000"; - i2c2 = "/cbb/i2c@c240000"; - i2c3 = "/cbb/i2c@3180000"; - i2c4 = "/cbb/i2c@3190000"; - i2c5 = "/cbb/i2c@31c0000"; - i2c6 = "/cbb/i2c@c250000"; - i2c7 = "/cbb/i2c@31e0000"; + i2c1 = "/cbb@0/i2c@3160000"; + i2c2 = "/cbb@0/i2c@c240000"; + i2c3 = "/cbb@0/i2c@3180000"; + i2c4 = "/cbb@0/i2c@3190000"; + i2c5 = "/cbb@0/i2c@31c0000"; + i2c6 = "/cbb@0/i2c@c250000"; + i2c7 = "/cbb@0/i2c@31e0000"; }; chosen { @@ -26,7 +27,7 @@ stdout-path = "serial0:115200n8"; }; - cbb { + cbb@0 { ethernet@2490000 { status = "okay"; @@ -168,7 +169,7 @@ in-ldo7-8-supply = <&vdd_1v8ls>; vdd_1v0: sd0 { - regulator-name = "VDD_1V0"; + regulator-name = "VDDIO_SYS_1V0"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; @@ -176,7 +177,7 @@ }; vdd_1v8hs: sd1 { - regulator-name = "VDD_1V8HS"; + regulator-name = "VDDIO_SYS_1V8HS"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; @@ -184,7 +185,7 @@ }; vdd_1v8ls: sd2 { - regulator-name = "VDD_1V8LS"; + regulator-name = "VDDIO_SYS_1V8LS"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; @@ -192,7 +193,7 @@ }; vdd_1v8ao: sd3 { - regulator-name = "VDD_1V8AO"; + regulator-name = "VDDIO_AO_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; @@ -216,7 +217,7 @@ }; ldo2 { - regulator-name = "VDD_AO_3V3"; + regulator-name = "VDDIO_AO_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; @@ -242,7 +243,7 @@ }; ldo7 { - regulator-name = "VDD_CSI_1V2"; + regulator-name = "AVDD_CSI_1V2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; @@ -309,9 +310,8 @@ regulator-name = "VDD_12V"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_LOW>; + gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_HIGH>; regulator-boot-on; - enable-active-low; }; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts index d47cd8c4dd24..353a6a22196d 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts @@ -10,8 +10,8 @@ model = "NVIDIA Jetson AGX Xavier Developer Kit"; compatible = "nvidia,p2972-0000", "nvidia,tegra194"; - cbb { - aconnect { + cbb@0 { + aconnect@2900000 { status = "okay"; dma-controller@2930000 { @@ -46,10 +46,39 @@ status = "okay"; }; + dpaux@155c0000 { + status = "okay"; + }; + + dpaux@155d0000 { + status = "okay"; + }; + dpaux@155e0000 { status = "okay"; }; + /* DP0 */ + sor@15b00000 { + status = "okay"; + + avdd-io-hdmi-dp-supply = <&vdd_1v0>; + vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>; + + nvidia,dpaux = <&dpaux0>; + }; + + /* DP1 */ + sor@15b40000 { + status = "okay"; + + avdd-io-hdmi-dp-supply = <&vdd_1v0>; + vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>; + + nvidia,dpaux = <&dpaux1>; + }; + + /* HDMI */ sor@15b80000 { status = "okay"; diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index 3c0cf54f0aab..11220d97adb8 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -15,7 +15,7 @@ #size-cells = <2>; /* control backbone */ - cbb { + cbb@0 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -39,7 +39,8 @@ }; ethernet@2490000 { - compatible = "nvidia,tegra186-eqos", + compatible = "nvidia,tegra194-eqos", + "nvidia,tegra186-eqos", "snps,dwc-qos-ethernet-4.10"; reg = <0x02490000 0x10000>; interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; @@ -60,7 +61,7 @@ snps,rxpbl = <8>; }; - aconnect { + aconnect@2900000 { compatible = "nvidia,tegra194-aconnect", "nvidia,tegra210-aconnect"; clocks = <&bpmp TEGRA194_CLK_APE>, @@ -1078,7 +1079,7 @@ sor1: sor@15b40000 { compatible = "nvidia,tegra194-sor"; - reg = <0x155c0000 0x40000>; + reg = <0x15b40000 0x40000>; interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_SOR1_REF>, <&bpmp TEGRA194_CLK_SOR1_OUT>, @@ -1185,7 +1186,6 @@ nvidia,bpmp = <&bpmp 1>; - supports-clkreq; nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; @@ -1231,7 +1231,6 @@ nvidia,bpmp = <&bpmp 2>; - supports-clkreq; nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; @@ -1277,7 +1276,6 @@ nvidia,bpmp = <&bpmp 3>; - supports-clkreq; nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; @@ -1323,7 +1321,6 @@ nvidia,bpmp = <&bpmp 4>; - supports-clkreq; nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; @@ -1369,7 +1366,6 @@ nvidia,bpmp = <&bpmp 0>; - supports-clkreq; nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; @@ -1419,7 +1415,6 @@ interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - supports-clkreq; nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; @@ -1478,60 +1473,192 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0_0: cpu@0 { compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; - reg = <0x10000>; + reg = <0x000>; enable-method = "psci"; + i-cache-size = <131072>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2c_0>; }; - cpu@1 { + cpu0_1: cpu@1 { compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; - reg = <0x10001>; + reg = <0x001>; enable-method = "psci"; + i-cache-size = <131072>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2c_0>; }; - cpu@2 { + cpu1_0: cpu@100 { compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; reg = <0x100>; enable-method = "psci"; + i-cache-size = <131072>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2c_1>; }; - cpu@3 { + cpu1_1: cpu@101 { compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; reg = <0x101>; enable-method = "psci"; + i-cache-size = <131072>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2c_1>; }; - cpu@4 { + cpu2_0: cpu@200 { compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; reg = <0x200>; enable-method = "psci"; + i-cache-size = <131072>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2c_2>; }; - cpu@5 { + cpu2_1: cpu@201 { compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; reg = <0x201>; enable-method = "psci"; + i-cache-size = <131072>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2c_2>; }; - cpu@6 { + cpu3_0: cpu@300 { compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; - reg = <0x10300>; + reg = <0x300>; enable-method = "psci"; + i-cache-size = <131072>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2c_3>; }; - cpu@7 { + cpu3_1: cpu@301 { compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; - reg = <0x10301>; + reg = <0x301>; enable-method = "psci"; + i-cache-size = <131072>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2c_3>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0_0>; + }; + + core1 { + cpu = <&cpu0_1>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu1_0>; + }; + + core1 { + cpu = <&cpu1_1>; + }; + }; + + cluster2 { + core0 { + cpu = <&cpu2_0>; + }; + + core1 { + cpu = <&cpu2_1>; + }; + }; + + cluster3 { + core0 { + cpu = <&cpu3_0>; + }; + + core1 { + cpu = <&cpu3_1>; + }; + }; + }; + + l2c_0: l2-cache0 { + cache-size = <2097152>; + cache-line-size = <64>; + cache-sets = <2048>; + next-level-cache = <&l3c>; + }; + + l2c_1: l2-cache1 { + cache-size = <2097152>; + cache-line-size = <64>; + cache-sets = <2048>; + next-level-cache = <&l3c>; + }; + + l2c_2: l2-cache2 { + cache-size = <2097152>; + cache-line-size = <64>; + cache-sets = <2048>; + next-level-cache = <&l3c>; + }; + + l2c_3: l2-cache3 { + cache-size = <2097152>; + cache-line-size = <64>; + cache-sets = <2048>; + next-level-cache = <&l3c>; + }; + + l3c: l3-cache { + cache-size = <4194304>; + cache-line-size = <64>; + cache-sets = <4096>; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi index 27723829d033..cb58f79deb48 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi @@ -279,6 +279,13 @@ pmc@7000e400 { nvidia,invert-interrupt; + nvidia,suspend-mode = <0>; + nvidia,cpu-pwr-good-time = <0>; + nvidia,cpu-pwr-off-time = <0>; + nvidia,core-pwr-good-time = <4587 3876>; + nvidia,core-pwr-off-time = <39065>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; }; /* eMMC */ diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi index a7dc319214a4..b0095072bc28 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi @@ -1612,7 +1612,7 @@ regulator-name = "VDD_HDMI_5V0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&exp1 12 GPIO_ACTIVE_LOW>; + gpio = <&exp1 12 GPIO_ACTIVE_HIGH>; enable-active-high; vin-supply = <&vdd_5v0_sys>; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts index 9d17ec707bce..90381d52ac54 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts @@ -64,6 +64,16 @@ status = "okay"; }; + sor@54540000 { + status = "okay"; + + avdd-io-hdmi-dp-supply = <&avdd_io_edp_1v05>; + vdd-hdmi-dp-pll-supply = <&vdd_1v8>; + + nvidia,xbar-cfg = <2 1 0 3 4>; + nvidia,dpaux = <&dpaux>; + }; + sor@54580000 { status = "okay"; @@ -76,6 +86,10 @@ GPIO_ACTIVE_LOW>; nvidia,xbar-cfg = <0 1 2 3 4>; }; + + dpaux@545c0000 { + status = "okay"; + }; }; gpu@57000000 { @@ -382,6 +396,13 @@ pmc@7000e400 { nvidia,invert-interrupt; + nvidia,suspend-mode = <0>; + nvidia,cpu-pwr-good-time = <0>; + nvidia,cpu-pwr-off-time = <0>; + nvidia,core-pwr-good-time = <4587 3876>; + nvidia,core-pwr-off-time = <39065>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; }; hda@70030000 { @@ -680,5 +701,19 @@ enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>; vin-supply = <&vdd_5v0_sys>; }; + + avdd_io_edp_1v05: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + + regulator-name = "AVDD_IO_EDP_1V05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + + gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&avdd_1v05_pll>; + }; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 659753118e96..48c63256ba7f 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -254,10 +254,11 @@ reg = <0x0 0x54540000 0x0 0x00040000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_SOR0>, + <&tegra_car TEGRA210_CLK_SOR0_OUT>, <&tegra_car TEGRA210_CLK_PLL_D_OUT0>, <&tegra_car TEGRA210_CLK_PLL_DP>, <&tegra_car TEGRA210_CLK_SOR_SAFE>; - clock-names = "sor", "parent", "dp", "safe"; + clock-names = "sor", "out", "parent", "dp", "safe"; resets = <&tegra_car 182>; reset-names = "sor"; pinctrl-0 = <&state_dpaux_aux>; @@ -768,7 +769,8 @@ rtc@7000e000 { compatible = "nvidia,tegra210-rtc", "nvidia,tegra20-rtc"; reg = <0x0 0x7000e000 0x0 0x100>; - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pmc>; clocks = <&tegra_car TEGRA210_CLK_RTC>; clock-names = "rtc"; }; @@ -778,6 +780,8 @@ reg = <0x0 0x7000e400 0x0 0x400>; clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; + #interrupt-cells = <2>; + interrupt-controller; powergates { pd_audio: aud { @@ -1438,6 +1442,16 @@ }; }; + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&{/cpus/cpu@0} &{/cpus/cpu@1} + &{/cpus/cpu@2} &{/cpus/cpu@3}>; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 @@ -1457,7 +1471,9 @@ reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */ 0x0 0x60006000 0x0 0x400>; /* CAR reg_base */ reg-names = "soctherm-reg", "car-reg"; - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "thermal", "edp"; clocks = <&tegra_car TEGRA210_CLK_TSENSOR>, <&tegra_car TEGRA210_CLK_SOC_THERM>; clock-names = "tsensor", "soctherm"; @@ -1504,6 +1520,7 @@ }; }; }; + mem { polling-delay-passive = <0>; polling-delay = <0>; @@ -1526,6 +1543,7 @@ */ }; }; + gpu { polling-delay-passive = <1000>; polling-delay = <0>; @@ -1554,6 +1572,7 @@ }; }; }; + pllx { polling-delay-passive = <0>; polling-delay = <0>; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index 04ad2fb22b9a..dba3488492f1 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -623,6 +623,8 @@ l21 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; }; l22 { regulator-min-microvolt = <3300000>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts index 2b28e383fd0b..d1ccb9472c8b 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -5,6 +5,7 @@ #include "msm8916.dtsi" #include "pm8916.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "Longcheer L8150"; @@ -18,6 +19,16 @@ stdout-path = "serial0"; }; + reserved-memory { + // wcnss.mdt is not relocatable, so it must be loaded at 0x8b600000 + /delete-node/ wcnss@89300000; + + wcnss_mem: wcnss@8b600000 { + reg = <0x0 0x8b600000 0x0 0x600000>; + no-map; + }; + }; + soc { sdhci@7824000 { status = "okay"; @@ -68,6 +79,10 @@ }; }; + wcnss@a21b000 { + status = "okay"; + }; + /* * Attempting to enable these devices causes a "synchronous * external abort". Suspected cause is that the debug power @@ -99,9 +114,36 @@ pinctrl-names = "default"; pinctrl-0 = <&usb_vbus_default>; }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; }; &msmgpio { + gpio_keys_default: gpio_keys_default { + pinmux { + function = "gpio"; + pins = "gpio107"; + }; + pinconf { + pins = "gpio107"; + drive-strength = <2>; + bias-pull-up; + }; + }; + usb_vbus_default: usb-vbus-default { pinmux { function = "gpio"; @@ -114,6 +156,19 @@ }; }; +&spmi_bus { + pm8916@0 { + pon@800 { + volume-down { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + }; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index e675ff48fdd2..bd1eb3eeca53 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -3,6 +3,7 @@ #include "msm8916.dtsi" #include "pm8916.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -63,6 +64,10 @@ }; }; + wcnss@a21b000 { + status = "okay"; + }; + /* * Attempting to enable these devices causes a "synchronous * external abort". Suspected cause is that the debug power @@ -87,6 +92,44 @@ etm@85f000 { status = "disabled"; }; }; + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + home { + label = "Home"; + gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOMEPAGE>; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_hall_sensor_default>; + + label = "GPIO Hall Effect Sensor"; + + hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + }; + }; + i2c-muic { compatible = "i2c-gpio"; sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; @@ -109,6 +152,30 @@ }; &msmgpio { + gpio_keys_default: gpio_keys_default { + pinmux { + function = "gpio"; + pins = "gpio107", "gpio109"; + }; + pinconf { + pins = "gpio107", "gpio109"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + gpio_hall_sensor_default: gpio_hall_sensor_default { + pinmux { + function = "gpio"; + pins = "gpio52"; + }; + pinconf { + pins = "gpio52"; + drive-strength = <2>; + bias-disable; + }; + }; + muic_int_default: muic_int_default { pinmux { function = "gpio"; @@ -234,3 +301,16 @@ regulator-max-microvolt = <2700000>; }; }; + +&spmi_bus { + pm8916@0 { + pon@800 { + volume-down { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts index 1aa59da98495..6629a621139c 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts @@ -8,3 +8,9 @@ model = "Samsung Galaxy A5U (EUR)"; compatible = "samsung,a5u-eur", "qcom,msm8916"; }; + +&pronto { + iris { + compatible = "qcom,wcn3680"; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 5ea9fb8f2f87..8686e101905c 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -179,7 +179,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&tsens 4>; + thermal-sensors = <&tsens 5>; trips { cpu0_1_alert0: trip-point@0 { @@ -209,7 +209,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&tsens 3>; + thermal-sensors = <&tsens 4>; trips { cpu2_3_alert0: trip-point@0 { diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 87f4d9c1b0d4..4ca2e7b44559 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -591,6 +591,8 @@ reg = <0x4a9000 0x1000>, /* TM */ <0x4a8000 0x1000>; /* SROT */ #qcom,sensors = <13>; + interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; #thermal-sensor-cells = <1>; }; @@ -599,6 +601,8 @@ reg = <0x4ad000 0x1000>, /* TM */ <0x4ac000 0x1000>; /* SROT */ #qcom,sensors = <8>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; #thermal-sensor-cells = <1>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi index 9682d4dd7496..6138b58db6d2 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi @@ -23,6 +23,57 @@ }; }; +&blsp1_uart3 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +/* + * The laptop FW does not appear to support the retention state as it is + * not advertised as enabled in ACPI, and enabling it in DT can cause boot + * hangs. + */ +&CPU0 { + cpu-idle-states = <&LITTLE_CPU_SLEEP_1>; +}; + +&CPU1 { + cpu-idle-states = <&LITTLE_CPU_SLEEP_1>; +}; + +&CPU2 { + cpu-idle-states = <&LITTLE_CPU_SLEEP_1>; +}; + +&CPU3 { + cpu-idle-states = <&LITTLE_CPU_SLEEP_1>; +}; + +&CPU4 { + cpu-idle-states = <&BIG_CPU_SLEEP_1>; +}; + +&CPU5 { + cpu-idle-states = <&BIG_CPU_SLEEP_1>; +}; + +&CPU6 { + cpu-idle-states = <&BIG_CPU_SLEEP_1>; +}; + +&CPU7 { + cpu-idle-states = <&BIG_CPU_SLEEP_1>; +}; + &qusb2phy { status = "okay"; @@ -104,6 +155,7 @@ vreg_l7a_1p8: l7 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-allow-set-load; }; vreg_l8a_1p2: l8 { regulator-min-microvolt = <1200000>; @@ -144,6 +196,7 @@ vreg_l17a_1p3: l17 { regulator-min-microvolt = <1304000>; regulator-max-microvolt = <1304000>; + regulator-allow-set-load; }; vreg_l18a_2p7: l18 { regulator-min-microvolt = <2704000>; @@ -179,6 +232,7 @@ vreg_l25a_3p3: l25 { regulator-min-microvolt = <3104000>; regulator-max-microvolt = <3312000>; + regulator-allow-set-load; }; vreg_l26a_1p2: l26 { regulator-min-microvolt = <1200000>; diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi index 108667ce4f31..5f101a20a20a 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi @@ -23,10 +23,84 @@ }; }; +&blsp1_uart3 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + &blsp2_uart1 { status = "okay"; }; +&etf { + status = "okay"; +}; + +&etm1 { + status = "okay"; +}; + +&etm2 { + status = "okay"; +}; + +&etm3 { + status = "okay"; +}; + +&etm4 { + status = "okay"; +}; + +&etm5 { + status = "okay"; +}; + +&etm6 { + status = "okay"; +}; + +&etm7 { + status = "okay"; +}; + +&etm8 { + status = "okay"; +}; + +&etr { + status = "okay"; +}; + +&funnel1 { + status = "okay"; +}; + +&funnel2 { + status = "okay"; +}; + +&funnel3 { + status = "okay"; +}; + +&funnel4 { + status = "okay"; +}; + +&funnel5 { + status = "okay"; +}; + &pm8005_lsid1 { pm8005-regulators { compatible = "qcom,pm8005-regulators"; @@ -51,6 +125,10 @@ vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; }; +&replicator1 { + status = "okay"; +}; + &rpm_requests { pm8998-regulators { compatible = "qcom,rpm-pm8998-regulators"; @@ -249,6 +327,10 @@ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; }; +&stm { + status = "okay"; +}; + &ufshc { vcc-supply = <&vreg_l20a_2p95>; vccq-supply = <&vreg_l26a_1p2>; diff --git a/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi index 6db70acd38ee..e32d3ab395ea 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi @@ -75,4 +75,17 @@ drive-strength = <2>; /* 2 mA */ }; }; + + blsp1_uart3_on: blsp1_uart3_on { + mux { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "blsp_uart3_a"; + }; + + config { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + drive-strength = <2>; + bias-disable; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index c6f81431983e..fc7838ea9a01 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -816,8 +816,9 @@ compatible = "qcom,msm8998-tsens", "qcom,tsens-v2"; reg = <0x010ab000 0x1000>, /* TM */ <0x010aa000 0x1000>; /* SROT */ - #qcom,sensors = <14>; + interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; #thermal-sensor-cells = <1>; }; @@ -825,8 +826,9 @@ compatible = "qcom,msm8998-tsens", "qcom,tsens-v2"; reg = <0x010ae000 0x1000>, /* TM */ <0x010ad000 0x1000>; /* SROT */ - #qcom,sensors = <8>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; #thermal-sensor-cells = <1>; }; @@ -998,11 +1000,12 @@ #interrupt-cells = <0x2>; }; - stm@6002000 { + stm: stm@6002000 { compatible = "arm,coresight-stm", "arm,primecell"; reg = <0x06002000 0x1000>, <0x16280000 0x180000>; reg-names = "stm-base", "stm-data-base"; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1016,9 +1019,10 @@ }; }; - funnel@6041000 { + funnel1: funnel@6041000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x06041000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1045,9 +1049,10 @@ }; }; - funnel@6042000 { + funnel2: funnel@6042000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x06042000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1075,9 +1080,10 @@ }; }; - funnel@6045000 { + funnel3: funnel@6045000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x06045000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1113,9 +1119,10 @@ }; }; - replicator@6046000 { + replicator1: replicator@6046000 { compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; reg = <0x06046000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1137,9 +1144,10 @@ }; }; - etf@6047000 { + etf: etf@6047000 { compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0x06047000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1163,9 +1171,10 @@ }; }; - etr@6048000 { + etr: etr@6048000 { compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0x06048000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1181,9 +1190,10 @@ }; }; - etm@7840000 { + etm1: etm@7840000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x07840000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1200,9 +1210,10 @@ }; }; - etm@7940000 { + etm2: etm@7940000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x07940000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1219,9 +1230,10 @@ }; }; - etm@7a40000 { + etm3: etm@7a40000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x07a40000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1238,9 +1250,10 @@ }; }; - etm@7b40000 { + etm4: etm@7b40000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x07b40000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1257,9 +1270,10 @@ }; }; - funnel@7b60000 { /* APSS Funnel */ + funnel4: funnel@7b60000 { /* APSS Funnel */ compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x07b60000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1343,9 +1357,10 @@ }; }; - funnel@7b70000 { + funnel5: funnel@7b70000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x07b70000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1369,9 +1384,10 @@ }; }; - etm@7c40000 { + etm5: etm@7c40000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x07c40000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1385,9 +1401,10 @@ }; }; - etm@7d40000 { + etm6: etm@7d40000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x07d40000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1401,9 +1418,10 @@ }; }; - etm@7e40000 { + etm7: etm@7e40000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x07e40000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1417,9 +1435,10 @@ }; }; - etm@7f40000 { + etm8: etm@7f40000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x07f40000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1556,6 +1575,33 @@ status = "disabled"; }; + blsp1_dma: dma@c144000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x0c144000 0x25000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <18>; + qcom,num-ees = <4>; + }; + + blsp1_uart3: serial@c171000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x0c171000 0x1000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 4>, <&blsp1_dma 5>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart3_on>; + status = "disabled"; + }; + blsp1_i2c1: i2c@c175000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x0c175000 0x600>; diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index a97eeb4569c0..f5f0c4c9cb16 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -22,6 +22,12 @@ #clock-cells = <0>; clock-frequency = <19200000>; }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; cpus { @@ -283,6 +289,15 @@ clock-names = "core"; }; + bimc: interconnect@400000 { + reg = <0x00400000 0x80000>; + compatible = "qcom,qcs404-bimc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + }; + tsens: thermal-sensor@4a9000 { compatible = "qcom,qcs404-tsens", "qcom,tsens-v1"; reg = <0x004a9000 0x1000>, /* TM */ @@ -290,9 +305,29 @@ nvmem-cells = <&tsens_caldata>; nvmem-cell-names = "calib"; #qcom,sensors = <10>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; #thermal-sensor-cells = <1>; }; + pcnoc: interconnect@500000 { + reg = <0x00500000 0x15080>; + compatible = "qcom,qcs404-pcnoc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_PNOC_CLK>, + <&rpmcc RPM_SMD_PNOC_A_CLK>; + }; + + snoc: interconnect@580000 { + reg = <0x00580000 0x23080>; + compatible = "qcom,qcs404-snoc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + }; + remoteproc_cdsp: remoteproc@b00000 { compatible = "qcom,qcs404-cdsp-pas"; reg = <0x00b00000 0x4040>; @@ -869,6 +904,12 @@ #mbox-cells = <1>; }; + watchdog@b017000 { + compatible = "qcom,kpss-wdt"; + reg = <0x0b017000 0x1000>; + clocks = <&sleep_clk>; + }; + timer@b120000 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi index 34881c0113cb..9a4ff57fc877 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -165,6 +165,8 @@ /delete-node/ &venus_mem; /delete-node/ &cdsp_mem; /delete-node/ &cdsp_pas; +/delete-node/ &zap_shader; +/delete-node/ &gpu_mem; /* Increase the size from 120 MB to 128 MB */ &mpss_region { @@ -701,9 +703,8 @@ ap_ts_i2c: &i2c14 { &ufs_mem_hc { status = "okay"; - pinctrl-names = "init", "default"; - pinctrl-0 = <&ufs_dev_reset_assert>; - pinctrl-1 = <&ufs_dev_reset_deassert>; + + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; vcc-supply = <&src_pp2950_l20a>; vcc-max-microamp = <600000>; @@ -1258,52 +1259,6 @@ ap_ts_i2c: &i2c14 { }; }; - ufs_dev_reset_assert: ufs_dev_reset_assert { - config { - pins = "ufs_reset"; - bias-pull-down; /* default: pull down */ - /* - * UFS_RESET driver strengths are having - * different values/steps compared to typical - * GPIO drive strengths. - * - * Following table clarifies: - * - * HDRV value | UFS_RESET | Typical GPIO - * (dec) | (mA) | (mA) - * 0 | 0.8 | 2 - * 1 | 1.55 | 4 - * 2 | 2.35 | 6 - * 3 | 3.1 | 8 - * 4 | 3.9 | 10 - * 5 | 4.65 | 12 - * 6 | 5.4 | 14 - * 7 | 6.15 | 16 - * - * POR value for UFS_RESET HDRV is 3 which means - * 3.1mA and we want to use that. Hence just - * specify 8mA to "drive-strength" binding and - * that should result into writing 3 to HDRV - * field. - */ - drive-strength = <8>; /* default: 3.1 mA */ - output-low; /* active low reset */ - }; - }; - - ufs_dev_reset_deassert: ufs_dev_reset_deassert { - config { - pins = "ufs_reset"; - bias-pull-down; /* default: pull down */ - /* - * default: 3.1 mA - * check comments under ufs_dev_reset_assert - */ - drive-strength = <8>; - output-high; /* active low reset */ - }; - }; - ap_suspend_l_assert: ap_suspend_l_assert { config { pins = "gpio126"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index f5a85caff1a3..d100f46791a6 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -312,6 +312,18 @@ regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; }; pmi8998-rpmh-regulators { diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index f406a4340b05..ddb1f23c936f 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -2824,7 +2824,7 @@ qcom,gmu = <&gmu>; - zap-shader { + zap_shader: zap-shader { memory-region = <&gpu_mem>; }; @@ -2950,6 +2950,8 @@ reg = <0 0x0c263000 0 0x1ff>, /* TM */ <0 0x0c222000 0 0x1ff>; /* SROT */ #qcom,sensors = <13>; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; #thermal-sensor-cells = <1>; }; @@ -2958,6 +2960,8 @@ reg = <0 0x0c265000 0 0x1ff>, /* TM */ <0 0x0c223000 0 0x1ff>; /* SROT */ #qcom,sensors = <8>; + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; #thermal-sensor-cells = <1>; }; @@ -3084,6 +3088,12 @@ status = "disabled"; }; + watchdog@17980000 { + compatible = "qcom,apss-wdt-sdm845", "qcom,kpss-wdt"; + reg = <0 0x17980000 0 0x1000>; + clocks = <&sleep_clk>; + }; + apss_shared: mailbox@17990000 { compatible = "qcom,sdm845-apss-shared"; reg = <0 0x17990000 0 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index ded120d3aef5..13dc619687f3 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -20,6 +20,11 @@ }; }; +&adsp_pas { + firmware-name = "qcom/LENOVO/81JL/qcadsp850.mbn"; + status = "okay"; +}; + &apps_rsc { pm8998-rpmh-regulators { compatible = "qcom,pm8998-rpmh-regulators"; @@ -229,6 +234,11 @@ status = "disabled"; }; +&cdsp_pas { + firmware-name = "qcom/LENOVO/81JL/qccdsp850.mbn"; + status = "okay"; +}; + &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -296,6 +306,10 @@ }; }; +&mss_pil { + firmware-name = "qcom/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/LENOVO/81JL/qcdsp2850.mbn"; +}; + &qup_i2c12_default { drive-strength = <2>; bias-disable; diff --git a/arch/arm64/boot/dts/realtek/Makefile b/arch/arm64/boot/dts/realtek/Makefile index 90c897ac3f7a..555638ada721 100644 --- a/arch/arm64/boot/dts/realtek/Makefile +++ b/arch/arm64/boot/dts/realtek/Makefile @@ -1,4 +1,9 @@ # SPDX-License-Identifier: GPL-2.0-only + +dtb-$(CONFIG_ARCH_REALTEK) += rtd1293-ds418j.dtb + dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-mele-v9.dtb dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-probox2-ava.dtb dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-zidoo-x9s.dtb + +dtb-$(CONFIG_ARCH_REALTEK) += rtd1296-ds418.dtb diff --git a/arch/arm64/boot/dts/realtek/rtd1293-ds418j.dts b/arch/arm64/boot/dts/realtek/rtd1293-ds418j.dts new file mode 100644 index 000000000000..b2dd583146b4 --- /dev/null +++ b/arch/arm64/boot/dts/realtek/rtd1293-ds418j.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +/* + * Copyright (c) 2017 Andreas Färber + */ + +/dts-v1/; + +#include "rtd1293.dtsi" + +/ { + compatible = "synology,ds418j", "realtek,rtd1293"; + model = "Synology DiskStation DS418j"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/realtek/rtd1293.dtsi b/arch/arm64/boot/dts/realtek/rtd1293.dtsi new file mode 100644 index 000000000000..bd4e22723f7b --- /dev/null +++ b/arch/arm64/boot/dts/realtek/rtd1293.dtsi @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +/* + * Realtek RTD1293 SoC + * + * Copyright (c) 2017-2019 Andreas Färber + */ + +#include "rtd129x.dtsi" + +/ { + compatible = "realtek,rtd1293"; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + next-level-cache = <&l2>; + }; + + l2: l2-cache { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; + +&arm_pmu { + interrupt-affinity = <&cpu0>, <&cpu1>; +}; diff --git a/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts b/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts index da19faab29d5..e98e508b9514 100644 --- a/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts +++ b/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) /* * Copyright (c) 2016-2017 Andreas Färber - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; diff --git a/arch/arm64/boot/dts/realtek/rtd1295.dtsi b/arch/arm64/boot/dts/realtek/rtd1295.dtsi index 41d7858da826..93f0e1d97721 100644 --- a/arch/arm64/boot/dts/realtek/rtd1295.dtsi +++ b/arch/arm64/boot/dts/realtek/rtd1295.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) /* * Realtek RTD1295 SoC * * Copyright (c) 2016-2017 Andreas Färber - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ #include "rtd129x.dtsi" diff --git a/arch/arm64/boot/dts/realtek/rtd1296-ds418.dts b/arch/arm64/boot/dts/realtek/rtd1296-ds418.dts new file mode 100644 index 000000000000..5a051a52bf88 --- /dev/null +++ b/arch/arm64/boot/dts/realtek/rtd1296-ds418.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +/* + * Copyright (c) 2017-2019 Andreas Färber + */ + +/dts-v1/; + +#include "rtd1296.dtsi" + +/ { + compatible = "synology,ds418", "realtek,rtd1296"; + model = "Synology DiskStation DS418"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x80000000>; + }; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/realtek/rtd1296.dtsi b/arch/arm64/boot/dts/realtek/rtd1296.dtsi new file mode 100644 index 000000000000..0f9e59cac086 --- /dev/null +++ b/arch/arm64/boot/dts/realtek/rtd1296.dtsi @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +/* + * Realtek RTD1296 SoC + * + * Copyright (c) 2017-2019 Andreas Färber + */ + +#include "rtd129x.dtsi" + +/ { + compatible = "realtek,rtd1296"; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x2>; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x3>; + next-level-cache = <&l2>; + }; + + l2: l2-cache { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; + +&arm_pmu { + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; +}; diff --git a/arch/arm64/boot/dts/realtek/rtd129x.dtsi b/arch/arm64/boot/dts/realtek/rtd129x.dtsi index b9cb92466fc7..4433114476f5 100644 --- a/arch/arm64/boot/dts/realtek/rtd129x.dtsi +++ b/arch/arm64/boot/dts/realtek/rtd129x.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) /* * Realtek RTD1293/RTD1295/RTD1296 SoC * * Copyright (c) 2016-2017 Andreas Färber - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /memreserve/ 0x0000000000000000 0x0000000000030000; @@ -13,6 +12,7 @@ /memreserve/ 0x0000000001ffe000 0x0000000000004000; #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/realtek,rtd1295.h> / { interrupt-parent = <&gic>; @@ -24,6 +24,13 @@ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; }; + osc27M: osc { + compatible = "fixed-clock"; + clock-frequency = <27000000>; + #clock-cells = <0>; + clock-output-names = "osc27M"; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -31,12 +38,49 @@ /* Exclude up to 2 GiB of RAM */ ranges = <0x80000000 0x80000000 0x80000000>; + reset1: reset-controller@98000000 { + compatible = "snps,dw-low-reset"; + reg = <0x98000000 0x4>; + #reset-cells = <1>; + }; + + reset2: reset-controller@98000004 { + compatible = "snps,dw-low-reset"; + reg = <0x98000004 0x4>; + #reset-cells = <1>; + }; + + reset3: reset-controller@98000008 { + compatible = "snps,dw-low-reset"; + reg = <0x98000008 0x4>; + #reset-cells = <1>; + }; + + reset4: reset-controller@98000050 { + compatible = "snps,dw-low-reset"; + reg = <0x98000050 0x4>; + #reset-cells = <1>; + }; + + iso_reset: reset-controller@98007088 { + compatible = "snps,dw-low-reset"; + reg = <0x98007088 0x4>; + #reset-cells = <1>; + }; + + wdt: watchdog@98007680 { + compatible = "realtek,rtd1295-watchdog"; + reg = <0x98007680 0x100>; + clocks = <&osc27M>; + }; + uart0: serial@98007800 { compatible = "snps,dw-apb-uart"; reg = <0x98007800 0x400>; reg-shift = <2>; reg-io-width = <4>; clock-frequency = <27000000>; + resets = <&iso_reset RTD1295_ISO_RSTN_UR0>; status = "disabled"; }; @@ -46,6 +90,7 @@ reg-shift = <2>; reg-io-width = <4>; clock-frequency = <432000000>; + resets = <&reset2 RTD1295_RSTN_UR1>; status = "disabled"; }; @@ -55,6 +100,7 @@ reg-shift = <2>; reg-io-width = <4>; clock-frequency = <432000000>; + resets = <&reset2 RTD1295_RSTN_UR2>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 42b74c283289..8fdbd2267384 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -1,6 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb +dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n.dtb +dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex.dtb dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb @@ -10,6 +12,10 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R8A77960) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb +dtb-$(CONFIG_ARCH_R8A77960) += r8a7796-m3ulcb-kf.dtb +dtb-$(CONFIG_ARCH_R8A77960) += r8a7796-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb r8a77965-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-m3nulcb.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-m3nulcb-kf.dtb diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi index 3e376d29a730..2c942a7eaeeb 100644 --- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi @@ -86,7 +86,7 @@ label = "rcar-sound"; - dais = <&rsnd_port0>; + dais = <&rsnd_port>; }; vbus0_usb2: regulator-vbus0-usb2 { @@ -142,14 +142,6 @@ }; &du { - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&cpg CPG_MOD 722>, - <&versaclock5 1>, - <&x302_clk>, - <&versaclock5 2>; - clock-names = "du.0", "du.1", "du.2", - "dclkin.0", "dclkin.1", "dclkin.2"; status = "okay"; }; @@ -191,7 +183,7 @@ port@2 { reg = <2>; dw_hdmi0_snd_in: endpoint { - remote-endpoint = <&rsnd_endpoint0>; + remote-endpoint = <&rsnd_endpoint>; }; }; }; @@ -327,17 +319,15 @@ /* Single DAI */ #sound-dai-cells = <0>; - ports { - rsnd_port0: port@0 { - rsnd_endpoint0: endpoint { - remote-endpoint = <&dw_hdmi0_snd_in>; + rsnd_port: port { + rsnd_endpoint: endpoint { + remote-endpoint = <&dw_hdmi0_snd_in>; - dai-format = "i2s"; - bitclock-master = <&rsnd_endpoint0>; - frame-master = <&rsnd_endpoint0>; + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint>; + frame-master = <&rsnd_endpoint>; - playback = <&ssi2>; - }; + playback = <&ssi2>; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi index 4280b190dc68..28fe17e3bc4e 100644 --- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi @@ -13,6 +13,14 @@ chosen { bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 50000>; + + brightness-levels = <0 2 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; }; &avb { @@ -43,11 +51,36 @@ status = "okay"; }; -&pciec0 { - status = "okay"; +&gpio1 { + /* + * When GP1_20 is LOW LVDS0 is connected to the LVDS connector + * When GP1_20 is HIGH LVDS0 is connected to the LT8918L + */ + lvds-connector-en-gpio { + gpio-hog; + gpios = <20 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "lvds-connector-en-gpio"; + }; +}; + +&lvds0 { + /* + * Please include the LVDS panel .dtsi file and uncomment the below line + * to enable LVDS panel connected to RZ/G2[MN] boards. + */ + + /* status = "okay"; */ + + ports { + port@1 { + lvds_connector: endpoint { + }; + }; + }; }; -&pciec1 { +&pciec0 { status = "okay"; }; @@ -82,4 +115,16 @@ groups = "can1_data"; function = "can1"; }; + + pwm0_pins: pwm0 { + groups = "pwm0"; + function = "pwm0"; + }; +}; + +&pwm0 { + pinctrl-0 = <&pwm0_pins>; + pinctrl-names = "default"; + + status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts index 6e33a3b27706..c754fca239d9 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts +++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts @@ -13,3 +13,7 @@ compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2m", "renesas,r8a774a1"; }; + +&pciec1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts index 93ca973c856c..96f2fb080a1a 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts +++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts @@ -24,3 +24,14 @@ reg = <0x6 0x00000000 0x0 0x80000000>; }; }; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&versaclock5 1>, + <&x302_clk>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.2", + "dclkin.0", "dclkin.1", "dclkin.2"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index 06c7c849c8ab..34a9f472fbb4 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -1726,17 +1726,6 @@ "ssi.1", "ssi.0"; status = "disabled"; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - }; - port@1 { - reg = <1>; - }; - }; - rcar_sound,ctu { ctu00: ctu-0 { }; ctu01: ctu-1 { }; @@ -2651,7 +2640,7 @@ clock-names = "du.0", "du.1", "du.2"; status = "disabled"; - vsps = <&vspd0 &vspd1 &vspd2>; + vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>; ports { #address-cells = <1>; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts new file mode 100644 index 000000000000..ab47c0bd9c19 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2N sub board + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +#include "r8a774b1-hihope-rzg2n.dts" +#include "hihope-rzg2-ex.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2N with sub board"; + compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2n", + "renesas,r8a774b1"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts new file mode 100644 index 000000000000..9910c1aa0a61 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2N main board + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a774b1.dtsi" +#include "hihope-common.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2N main board based on r8a774b1"; + compatible = "hoperun,hihope-rzg2n", "renesas,r8a774b1"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@480000000 { + device_type = "memory"; + reg = <0x4 0x80000000 0x0 0x80000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 721>, + <&versaclock5 1>, + <&x302_clk>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.3", + "dclkin.0", "dclkin.1", "dclkin.3"; +}; + +&sdhi3 { + mmc-hs400-1_8v; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi new file mode 100644 index 000000000000..fe78387e4bb8 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi @@ -0,0 +1,2627 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the r8a774b1 SoC + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/r8a774b1-cpg-mssr.h> +#include <dt-bindings/power/r8a774b1-sysc.h> + +/ { + compatible = "renesas,r8a774b1"; + #address-cells = <2>; + #size-cells = <2>; + + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <830000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <830000>; + clock-latency-ns = <300000>; + }; + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <830000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + a57_0: cpu@0 { + compatible = "arm,cortex-a57"; + reg = <0x0>; + device_type = "cpu"; + power-domains = <&sysc R8A774B1_PD_CA57_CPU0>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + #cooling-cells = <2>; + dynamic-power-coefficient = <854>; + clocks = <&cpg CPG_CORE R8A774B1_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + }; + + a57_1: cpu@1 { + compatible = "arm,cortex-a57"; + reg = <0x1>; + device_type = "cpu"; + power-domains = <&sysc R8A774B1_PD_CA57_CPU1>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + clocks = <&cpg CPG_CORE R8A774B1_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + }; + + L2_CA57: cache-controller-0 { + compatible = "cache"; + power-domains = <&sysc R8A774B1_PD_CA57_SCU>; + cache-unified; + cache-level = <2>; + }; + }; + + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + extalr_clk: extalr { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + pmu_a57 { + compatible = "arm,cortex-a57-pmu"; + interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a57_0>, <&a57_1>; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a774b1-wdt", + "renesas,rcar-gen3-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 402>; + status = "disabled"; + }; + + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a774b1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a774b1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 29>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 911>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a774b1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 15>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 910>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a774b1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 909>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a774b1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 18>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 908>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a774b1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 907>; + }; + + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a774b1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055400 0 0x50>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 906>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 906>; + }; + + gpio7: gpio@e6055800 { + compatible = "renesas,gpio-r8a774b1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055800 0 0x50>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 224 4>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 905>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 905>; + }; + + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a774b1"; + reg = <0 0xe6060000 0 0x50c>; + }; + + cmt0: timer@e60f0000 { + compatible = "renesas,r8a774b1-cmt0", + "renesas,rcar-gen3-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 303>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 303>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a774b1-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 302>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 302>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a774b1-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 301>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 301>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a774b1-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 300>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a774b1-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&extalr_clk>; + clock-names = "extal", "extalr"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a774b1-rst"; + reg = <0 0xe6160000 0 0x0200>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a774b1-sysc"; + reg = <0 0xe6180000 0 0x0400>; + #power-domain-cells = <1>; + }; + + tsc: thermal@e6198000 { + compatible = "renesas,r8a774b1-thermal"; + reg = <0 0xe6198000 0 0x100>, + <0 0xe61a0000 0 0x100>, + <0 0xe61a8000 0 0x100>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <1>; + }; + + intc_ex: interrupt-controller@e61c0000 { + compatible = "renesas,intc-ex-r8a774b1", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 407>; + }; + + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a774b1", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@e6fc0000 { + compatible = "renesas,tmu-r8a774b1", "renesas,tmu"; + reg = <0 0xe6fc0000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + tmu2: timer@e6fd0000 { + compatible = "renesas,tmu-r8a774b1", "renesas,tmu"; + reg = <0 0xe6fd0000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 123>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 123>; + status = "disabled"; + }; + + tmu3: timer@e6fe0000 { + compatible = "renesas,tmu-r8a774b1", "renesas,tmu"; + reg = <0 0xe6fe0000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu4: timer@ffc00000 { + compatible = "renesas,tmu-r8a774b1", "renesas,tmu"; + reg = <0 0xffc00000 0 0x30>; + interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + + i2c0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774b1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6500000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 931>; + dmas = <&dmac1 0x91>, <&dmac1 0x90>, + <&dmac2 0x91>, <&dmac2 0x90>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774b1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 930>; + dmas = <&dmac1 0x93>, <&dmac1 0x92>, + <&dmac2 0x93>, <&dmac2 0x92>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774b1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6510000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 929>; + dmas = <&dmac1 0x95>, <&dmac1 0x94>, + <&dmac2 0x95>, <&dmac2 0x94>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774b1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 928>; + dmas = <&dmac0 0x97>, <&dmac0 0x96>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c4: i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774b1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d8000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 927>; + dmas = <&dmac0 0x99>, <&dmac0 0x98>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c5: i2c@e66e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774b1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e0000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 919>; + dmas = <&dmac0 0x9b>, <&dmac0 0x9a>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c6: i2c@e66e8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774b1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e8000 0 0x40>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 918>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 918>; + dmas = <&dmac0 0x9d>, <&dmac0 0x9c>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c_dvfs: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a774b1", + "renesas,rcar-gen3-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 926>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 926>; + dmas = <&dmac0 0x11>, <&dmac0 0x10>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a774b1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6540000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>, + <&dmac2 0x31>, <&dmac2 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 520>; + status = "disabled"; + }; + + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a774b1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6550000 0 0x60>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 519>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x33>, <&dmac1 0x32>, + <&dmac2 0x33>, <&dmac2 0x32>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 519>; + status = "disabled"; + }; + + hscif2: serial@e6560000 { + compatible = "renesas,hscif-r8a774b1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6560000 0 0x60>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 518>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x35>, <&dmac1 0x34>, + <&dmac2 0x35>, <&dmac2 0x34>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 518>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a774b1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66a0000 0 0x60>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x37>, <&dmac0 0x36>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 517>; + status = "disabled"; + }; + + hscif4: serial@e66b0000 { + compatible = "renesas,hscif-r8a774b1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66b0000 0 0x60>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 516>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x38>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 516>; + status = "disabled"; + }; + + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a774b1", + "renesas,rcar-gen3-usbhs"; + reg = <0 0xe6590000 0 0x200>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>; + dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, + <&usb_dmac1 0>, <&usb_dmac1 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; + renesas,buswait = <11>; + phys = <&usb2_phy0 3>; + phy-names = "usb"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 704>, <&cpg 703>; + status = "disabled"; + }; + + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,r8a774b1-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 330>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 330>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,r8a774b1-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 331>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb3_phy0: usb-phy@e65ee000 { + compatible = "renesas,r8a774b1-usb3-phy", + "renesas,rcar-gen3-usb3-phy"; + reg = <0 0xe65ee000 0 0x90>; + clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, + <&usb_extal_clk>; + clock-names = "usb3-if", "usb3s_clk", "usb_extal"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 328>; + #phy-cells = <0>; + status = "disabled"; + }; + + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a774b1", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x10000>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 219>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>, + <&ipmmu_ds0 2>, <&ipmmu_ds0 3>, + <&ipmmu_ds0 4>, <&ipmmu_ds0 5>, + <&ipmmu_ds0 6>, <&ipmmu_ds0 7>, + <&ipmmu_ds0 8>, <&ipmmu_ds0 9>, + <&ipmmu_ds0 10>, <&ipmmu_ds0 11>, + <&ipmmu_ds0 12>, <&ipmmu_ds0 13>, + <&ipmmu_ds0 14>, <&ipmmu_ds0 15>; + }; + + dmac1: dma-controller@e7300000 { + compatible = "renesas,dmac-r8a774b1", + "renesas,rcar-dmac"; + reg = <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>, + <&ipmmu_ds1 2>, <&ipmmu_ds1 3>, + <&ipmmu_ds1 4>, <&ipmmu_ds1 5>, + <&ipmmu_ds1 6>, <&ipmmu_ds1 7>, + <&ipmmu_ds1 8>, <&ipmmu_ds1 9>, + <&ipmmu_ds1 10>, <&ipmmu_ds1 11>, + <&ipmmu_ds1 12>, <&ipmmu_ds1 13>, + <&ipmmu_ds1 14>, <&ipmmu_ds1 15>; + }; + + dmac2: dma-controller@e7310000 { + compatible = "renesas,dmac-r8a774b1", + "renesas,rcar-dmac"; + reg = <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 217>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 217>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>, + <&ipmmu_ds1 18>, <&ipmmu_ds1 19>, + <&ipmmu_ds1 20>, <&ipmmu_ds1 21>, + <&ipmmu_ds1 22>, <&ipmmu_ds1 23>, + <&ipmmu_ds1 24>, <&ipmmu_ds1 25>, + <&ipmmu_ds1 26>, <&ipmmu_ds1 27>, + <&ipmmu_ds1 28>, <&ipmmu_ds1 29>, + <&ipmmu_ds1 30>, <&ipmmu_ds1 31>; + }; + + ipmmu_ds0: mmu@e6740000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xe6740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ds1: mmu@e7740000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 1>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_hc: mmu@e6570000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xe6570000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 2>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mm: mmu@e67b0000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mp: mmu@ec670000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xec670000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 4>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_pv0: mmu@fd800000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xfd800000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 6>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vc0: mmu@fe6b0000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xfe6b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 12>; + power-domains = <&sysc R8A774B1_PD_A3VC>; + #iommu-cells = <1>; + }; + + ipmmu_vi0: mmu@febd0000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 14>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vp0: mmu@fe990000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xfe990000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 16>; + power-domains = <&sysc R8A774B1_PD_A3VP>; + #iommu-cells = <1>; + }; + + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a774b1", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6800000 0 0x800>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 812>; + phy-mode = "rgmii"; + iommus = <&ipmmu_ds0 16>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + can0: can@e6c30000 { + compatible = "renesas,can-r8a774b1", + "renesas,rcar-gen3-can"; + reg = <0 0xe6c30000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A774B1_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774B1_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 916>; + status = "disabled"; + }; + + can1: can@e6c38000 { + compatible = "renesas,can-r8a774b1", + "renesas,rcar-gen3-can"; + reg = <0 0xe6c38000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>, + <&cpg CPG_CORE R8A774B1_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774B1_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 915>; + status = "disabled"; + }; + + canfd: can@e66c0000 { + compatible = "renesas,r8a774b1-canfd", + "renesas,rcar-gen3-canfd"; + reg = <0 0xe66c0000 0 0x8000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 914>, + <&cpg CPG_CORE R8A774B1_CLK_CANFD>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774B1_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 914>; + status = "disabled"; + + channel0 { + status = "disabled"; + }; + + channel1 { + status = "disabled"; + }; + }; + + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pwm5: pwm@e6e35000 { + compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar"; + reg = <0 0xe6e35000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pwm6: pwm@e6e36000 { + compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar"; + reg = <0 0xe6e36000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a774b1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 0x40>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x51>, <&dmac1 0x50>, + <&dmac2 0x51>, <&dmac2 0x50>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 207>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a774b1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 0x40>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x53>, <&dmac1 0x52>, + <&dmac2 0x53>, <&dmac2 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 206>; + status = "disabled"; + }; + + scif2: serial@e6e88000 { + compatible = "renesas,scif-r8a774b1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e88000 0 0x40>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 310>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x13>, <&dmac1 0x12>, + <&dmac2 0x13>, <&dmac2 0x12>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 310>; + status = "disabled"; + }; + + scif3: serial@e6c50000 { + compatible = "renesas,scif-r8a774b1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c50000 0 0x40>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x57>, <&dmac0 0x56>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 204>; + status = "disabled"; + }; + + scif4: serial@e6c40000 { + compatible = "renesas,scif-r8a774b1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c40000 0 0x40>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x59>, <&dmac0 0x58>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 203>; + status = "disabled"; + }; + + scif5: serial@e6f30000 { + compatible = "renesas,scif-r8a774b1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6f30000 0 0x40>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 202>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x5b>, <&dmac1 0x5a>, + <&dmac2 0x5b>, <&dmac2 0x5a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 202>; + status = "disabled"; + }; + + msiof0: spi@e6e90000 { + compatible = "renesas,msiof-r8a774b1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6e90000 0 0x0064>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 211>; + dmas = <&dmac1 0x41>, <&dmac1 0x40>, + <&dmac2 0x41>, <&dmac2 0x40>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 211>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6ea0000 { + compatible = "renesas,msiof-r8a774b1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6ea0000 0 0x0064>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 210>; + dmas = <&dmac1 0x43>, <&dmac1 0x42>, + <&dmac2 0x43>, <&dmac2 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 210>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6c00000 { + compatible = "renesas,msiof-r8a774b1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c00000 0 0x0064>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 209>; + dmas = <&dmac0 0x45>, <&dmac0 0x44>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 209>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof3: spi@e6c10000 { + compatible = "renesas,msiof-r8a774b1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c10000 0 0x0064>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x47>, <&dmac0 0x46>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 208>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a774b1"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 811>; + renesas,id = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin0csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin0>; + }; + vin0csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin0>; + }; + }; + }; + }; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a774b1"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 810>; + renesas,id = <1>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin1csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin1>; + }; + vin1csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin1>; + }; + }; + }; + }; + + vin2: video@e6ef2000 { + compatible = "renesas,vin-r8a774b1"; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 809>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 809>; + renesas,id = <2>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin2csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin2>; + }; + vin2csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin2>; + }; + }; + }; + }; + + vin3: video@e6ef3000 { + compatible = "renesas,vin-r8a774b1"; + reg = <0 0xe6ef3000 0 0x1000>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 808>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 808>; + renesas,id = <3>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin3csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin3>; + }; + vin3csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin3>; + }; + }; + }; + }; + + vin4: video@e6ef4000 { + compatible = "renesas,vin-r8a774b1"; + reg = <0 0xe6ef4000 0 0x1000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 807>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 807>; + renesas,id = <4>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin4csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin4>; + }; + vin4csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin4>; + }; + }; + }; + }; + + vin5: video@e6ef5000 { + compatible = "renesas,vin-r8a774b1"; + reg = <0 0xe6ef5000 0 0x1000>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 806>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 806>; + renesas,id = <5>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin5csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin5>; + }; + vin5csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin5>; + }; + }; + }; + }; + + vin6: video@e6ef6000 { + compatible = "renesas,vin-r8a774b1"; + reg = <0 0xe6ef6000 0 0x1000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 805>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 805>; + renesas,id = <6>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin6csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin6>; + }; + vin6csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin6>; + }; + }; + }; + }; + + vin7: video@e6ef7000 { + compatible = "renesas,vin-r8a774b1"; + reg = <0 0xe6ef7000 0 0x1000>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 804>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 804>; + renesas,id = <7>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin7csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin7>; + }; + vin7csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin7>; + }; + }; + }; + }; + + rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + /* + * #clock-cells is required for audio_clkout0/1/2/3 + * + * clkout : #clock-cells = <0>; <&rcar_sound>; + * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a774b1", "renesas,rcar_sound-gen3"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, + <&audio_clk_c>, + <&cpg CPG_CORE R8A774B1_CLK_S0D4>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", + "src.5", "src.4", "src.3", "src.2", + "src.1", "src.0", + "mix.1", "mix.0", + "ctu.1", "ctu.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, + <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, + <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0"; + status = "disabled"; + + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + + rcar_sound,dvc { + dvc0: dvc-0 { + dmas = <&audma1 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc-1 { + dmas = <&audma1 0xbe>; + dma-names = "tx"; + }; + }; + + rcar_sound,mix { + mix0: mix-0 { }; + mix1: mix-1 { }; + }; + + rcar_sound,src { + src0: src-0 { + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x85>, <&audma1 0x9a>; + dma-names = "rx", "tx"; + }; + src1: src-1 { + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma1 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src-2 { + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma1 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src-3 { + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma1 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src-4 { + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma1 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src-5 { + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma1 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src-6 { + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma1 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src-7 { + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x93>, <&audma1 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src-8 { + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x95>, <&audma1 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src-9 { + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x97>, <&audma1 0xba>; + dma-names = "rx", "tx"; + }; + }; + + rcar_sound,ssi { + ssi0: ssi-0 { + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma1 0x02>; + dma-names = "rx", "tx"; + }; + ssi1: ssi-1 { + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma1 0x04>; + dma-names = "rx", "tx"; + }; + ssi2: ssi-2 { + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma1 0x06>; + dma-names = "rx", "tx"; + }; + ssi3: ssi-3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma1 0x08>; + dma-names = "rx", "tx"; + }; + ssi4: ssi-4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma1 0x0a>; + dma-names = "rx", "tx"; + }; + ssi5: ssi-5 { + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma1 0x0c>; + dma-names = "rx", "tx"; + }; + ssi6: ssi-6 { + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma1 0x0e>; + dma-names = "rx", "tx"; + }; + ssi7: ssi-7 { + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma1 0x10>; + dma-names = "rx", "tx"; + }; + ssi8: ssi-8 { + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma1 0x12>; + dma-names = "rx", "tx"; + }; + ssi9: ssi-9 { + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma1 0x14>; + dma-names = "rx", "tx"; + }; + }; + + rcar_sound,ssiu { + ssiu00: ssiu-0 { + dmas = <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx"; + }; + ssiu01: ssiu-1 { + dmas = <&audma0 0x35>, <&audma1 0x36>; + dma-names = "rx", "tx"; + }; + ssiu02: ssiu-2 { + dmas = <&audma0 0x37>, <&audma1 0x38>; + dma-names = "rx", "tx"; + }; + ssiu03: ssiu-3 { + dmas = <&audma0 0x47>, <&audma1 0x48>; + dma-names = "rx", "tx"; + }; + ssiu04: ssiu-4 { + dmas = <&audma0 0x3F>, <&audma1 0x40>; + dma-names = "rx", "tx"; + }; + ssiu05: ssiu-5 { + dmas = <&audma0 0x43>, <&audma1 0x44>; + dma-names = "rx", "tx"; + }; + ssiu06: ssiu-6 { + dmas = <&audma0 0x4F>, <&audma1 0x50>; + dma-names = "rx", "tx"; + }; + ssiu07: ssiu-7 { + dmas = <&audma0 0x53>, <&audma1 0x54>; + dma-names = "rx", "tx"; + }; + ssiu10: ssiu-8 { + dmas = <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx"; + }; + ssiu11: ssiu-9 { + dmas = <&audma0 0x4B>, <&audma1 0x4C>; + dma-names = "rx", "tx"; + }; + ssiu12: ssiu-10 { + dmas = <&audma0 0x57>, <&audma1 0x58>; + dma-names = "rx", "tx"; + }; + ssiu13: ssiu-11 { + dmas = <&audma0 0x59>, <&audma1 0x5A>; + dma-names = "rx", "tx"; + }; + ssiu14: ssiu-12 { + dmas = <&audma0 0x5F>, <&audma1 0x60>; + dma-names = "rx", "tx"; + }; + ssiu15: ssiu-13 { + dmas = <&audma0 0xC3>, <&audma1 0xC4>; + dma-names = "rx", "tx"; + }; + ssiu16: ssiu-14 { + dmas = <&audma0 0xC7>, <&audma1 0xC8>; + dma-names = "rx", "tx"; + }; + ssiu17: ssiu-15 { + dmas = <&audma0 0xCB>, <&audma1 0xCC>; + dma-names = "rx", "tx"; + }; + ssiu20: ssiu-16 { + dmas = <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx"; + }; + ssiu21: ssiu-17 { + dmas = <&audma0 0x67>, <&audma1 0x68>; + dma-names = "rx", "tx"; + }; + ssiu22: ssiu-18 { + dmas = <&audma0 0x6B>, <&audma1 0x6C>; + dma-names = "rx", "tx"; + }; + ssiu23: ssiu-19 { + dmas = <&audma0 0x6D>, <&audma1 0x6E>; + dma-names = "rx", "tx"; + }; + ssiu24: ssiu-20 { + dmas = <&audma0 0xCF>, <&audma1 0xCE>; + dma-names = "rx", "tx"; + }; + ssiu25: ssiu-21 { + dmas = <&audma0 0xEB>, <&audma1 0xEC>; + dma-names = "rx", "tx"; + }; + ssiu26: ssiu-22 { + dmas = <&audma0 0xED>, <&audma1 0xEE>; + dma-names = "rx", "tx"; + }; + ssiu27: ssiu-23 { + dmas = <&audma0 0xEF>, <&audma1 0xF0>; + dma-names = "rx", "tx"; + }; + ssiu30: ssiu-24 { + dmas = <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx"; + }; + ssiu31: ssiu-25 { + dmas = <&audma0 0x21>, <&audma1 0x22>; + dma-names = "rx", "tx"; + }; + ssiu32: ssiu-26 { + dmas = <&audma0 0x23>, <&audma1 0x24>; + dma-names = "rx", "tx"; + }; + ssiu33: ssiu-27 { + dmas = <&audma0 0x25>, <&audma1 0x26>; + dma-names = "rx", "tx"; + }; + ssiu34: ssiu-28 { + dmas = <&audma0 0x27>, <&audma1 0x28>; + dma-names = "rx", "tx"; + }; + ssiu35: ssiu-29 { + dmas = <&audma0 0x29>, <&audma1 0x2A>; + dma-names = "rx", "tx"; + }; + ssiu36: ssiu-30 { + dmas = <&audma0 0x2B>, <&audma1 0x2C>; + dma-names = "rx", "tx"; + }; + ssiu37: ssiu-31 { + dmas = <&audma0 0x2D>, <&audma1 0x2E>; + dma-names = "rx", "tx"; + }; + ssiu40: ssiu-32 { + dmas = <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx"; + }; + ssiu41: ssiu-33 { + dmas = <&audma0 0x17>, <&audma1 0x18>; + dma-names = "rx", "tx"; + }; + ssiu42: ssiu-34 { + dmas = <&audma0 0x19>, <&audma1 0x1A>; + dma-names = "rx", "tx"; + }; + ssiu43: ssiu-35 { + dmas = <&audma0 0x1B>, <&audma1 0x1C>; + dma-names = "rx", "tx"; + }; + ssiu44: ssiu-36 { + dmas = <&audma0 0x1D>, <&audma1 0x1E>; + dma-names = "rx", "tx"; + }; + ssiu45: ssiu-37 { + dmas = <&audma0 0x1F>, <&audma1 0x20>; + dma-names = "rx", "tx"; + }; + ssiu46: ssiu-38 { + dmas = <&audma0 0x31>, <&audma1 0x32>; + dma-names = "rx", "tx"; + }; + ssiu47: ssiu-39 { + dmas = <&audma0 0x33>, <&audma1 0x34>; + dma-names = "rx", "tx"; + }; + ssiu50: ssiu-40 { + dmas = <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx"; + }; + ssiu60: ssiu-41 { + dmas = <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx"; + }; + ssiu70: ssiu-42 { + dmas = <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx"; + }; + ssiu80: ssiu-43 { + dmas = <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx"; + }; + ssiu90: ssiu-44 { + dmas = <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx"; + }; + ssiu91: ssiu-45 { + dmas = <&audma0 0x7F>, <&audma1 0x80>; + dma-names = "rx", "tx"; + }; + ssiu92: ssiu-46 { + dmas = <&audma0 0x81>, <&audma1 0x82>; + dma-names = "rx", "tx"; + }; + ssiu93: ssiu-47 { + dmas = <&audma0 0x83>, <&audma1 0x84>; + dma-names = "rx", "tx"; + }; + ssiu94: ssiu-48 { + dmas = <&audma0 0xA3>, <&audma1 0xA4>; + dma-names = "rx", "tx"; + }; + ssiu95: ssiu-49 { + dmas = <&audma0 0xA5>, <&audma1 0xA6>; + dma-names = "rx", "tx"; + }; + ssiu96: ssiu-50 { + dmas = <&audma0 0xA7>, <&audma1 0xA8>; + dma-names = "rx", "tx"; + }; + ssiu97: ssiu-51 { + dmas = <&audma0 0xA9>, <&audma1 0xAA>; + dma-names = "rx", "tx"; + }; + }; + }; + + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a774b1", + "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 502>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + audma1: dma-controller@ec720000 { + compatible = "renesas,dmac-r8a774b1", + "renesas,rcar-dmac"; + reg = <0 0xec720000 0 0x10000>; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 501>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 501>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + xhci0: usb@ee000000 { + compatible = "renesas,xhci-r8a774b1", + "renesas,rcar-gen3-xhci"; + reg = <0 0xee000000 0 0xc00>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 328>; + status = "disabled"; + }; + + usb3_peri0: usb@ee020000 { + compatible = "renesas,r8a774b1-usb3-peri", + "renesas,rcar-gen3-usb3-peri"; + reg = <0 0xee020000 0 0x400>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 328>; + status = "disabled"; + }; + + ohci0: usb@ee080000 { + compatible = "generic-ohci"; + reg = <0 0xee080000 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + phys = <&usb2_phy0 1>; + phy-names = "usb"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + status = "disabled"; + }; + + ohci1: usb@ee0a0000 { + compatible = "generic-ohci"; + reg = <0 0xee0a0000 0 0x100>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 702>; + phys = <&usb2_phy1 1>; + phy-names = "usb"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 702>; + status = "disabled"; + }; + + ehci0: usb@ee080100 { + compatible = "generic-ehci"; + reg = <0 0xee080100 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + phys = <&usb2_phy0 2>; + phy-names = "usb"; + companion = <&ohci0>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + status = "disabled"; + }; + + ehci1: usb@ee0a0100 { + compatible = "generic-ehci"; + reg = <0 0xee0a0100 0 0x100>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 702>; + phys = <&usb2_phy1 2>; + phy-names = "usb"; + companion = <&ohci1>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 702>; + status = "disabled"; + }; + + usb2_phy0: usb-phy@ee080200 { + compatible = "renesas,usb2-phy-r8a774b1", + "renesas,rcar-gen3-usb2-phy"; + reg = <0 0xee080200 0 0x700>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + #phy-cells = <1>; + status = "disabled"; + }; + + usb2_phy1: usb-phy@ee0a0200 { + compatible = "renesas,usb2-phy-r8a774b1", + "renesas,rcar-gen3-usb2-phy"; + reg = <0 0xee0a0200 0 0x700>; + clocks = <&cpg CPG_MOD 702>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 702>; + #phy-cells = <1>; + status = "disabled"; + }; + + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a774b1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee100000 0 0x2000>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + max-frequency = <200000000>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 314>; + status = "disabled"; + }; + + sdhi1: sd@ee120000 { + compatible = "renesas,sdhi-r8a774b1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee120000 0 0x2000>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 313>; + max-frequency = <200000000>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 313>; + status = "disabled"; + }; + + sdhi2: sd@ee140000 { + compatible = "renesas,sdhi-r8a774b1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee140000 0 0x2000>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + max-frequency = <200000000>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 312>; + status = "disabled"; + }; + + sdhi3: sd@ee160000 { + compatible = "renesas,sdhi-r8a774b1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee160000 0 0x2000>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 311>; + max-frequency = <200000000>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 311>; + status = "disabled"; + }; + + sata: sata@ee300000 { + compatible = "renesas,sata-r8a774b1", + "renesas,rcar-gen3-sata"; + reg = <0 0xee300000 0 0x200000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 815>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 815>; + status = "disabled"; + }; + + gic: interrupt-controller@f1010000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xf1010000 0 0x1000>, + <0x0 0xf1020000 0 0x20000>, + <0x0 0xf1040000 0 0x20000>, + <0x0 0xf1060000 0 0x20000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 408>; + }; + + pciec0: pcie@fe000000 { + compatible = "renesas,pcie-r8a774b1", + "renesas,pcie-rcar-gen3"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 319>; + status = "disabled"; + }; + + pciec1: pcie@ee800000 { + compatible = "renesas,pcie-r8a774b1", + "renesas,pcie-rcar-gen3"; + reg = <0 0xee800000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000 + 0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000 + 0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000 + 0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 318>; + status = "disabled"; + }; + + fdp1@fe940000 { + compatible = "renesas,fdp1"; + reg = <0 0xfe940000 0 0x2400>; + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 119>; + power-domains = <&sysc R8A774B1_PD_A3VP>; + resets = <&cpg 119>; + renesas,fcp = <&fcpf0>; + }; + + fcpf0: fcp@fe950000 { + compatible = "renesas,fcpf"; + reg = <0 0xfe950000 0 0x200>; + clocks = <&cpg CPG_MOD 615>; + power-domains = <&sysc R8A774B1_PD_A3VP>; + resets = <&cpg 615>; + }; + + vspb: vsp@fe960000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe960000 0 0x8000>; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 626>; + power-domains = <&sysc R8A774B1_PD_A3VP>; + resets = <&cpg 626>; + + renesas,fcp = <&fcpvb0>; + }; + + vspi0: vsp@fe9a0000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe9a0000 0 0x8000>; + interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 631>; + power-domains = <&sysc R8A774B1_PD_A3VP>; + resets = <&cpg 631>; + + renesas,fcp = <&fcpvi0>; + }; + + vspd0: vsp@fea20000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea20000 0 0x5000>; + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 623>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 623>; + + renesas,fcp = <&fcpvd0>; + }; + + vspd1: vsp@fea28000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea28000 0 0x5000>; + interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 622>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 622>; + + renesas,fcp = <&fcpvd1>; + }; + + fcpvb0: fcp@fe96f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe96f000 0 0x200>; + clocks = <&cpg CPG_MOD 607>; + power-domains = <&sysc R8A774B1_PD_A3VP>; + resets = <&cpg 607>; + }; + + fcpvd0: fcp@fea27000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea27000 0 0x200>; + clocks = <&cpg CPG_MOD 603>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 603>; + }; + + fcpvd1: fcp@fea2f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea2f000 0 0x200>; + clocks = <&cpg CPG_MOD 602>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 602>; + }; + + fcpvi0: fcp@fe9af000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe9af000 0 0x200>; + clocks = <&cpg CPG_MOD 611>; + power-domains = <&sysc R8A774B1_PD_A3VP>; + resets = <&cpg 611>; + }; + + csi20: csi2@fea80000 { + compatible = "renesas,r8a774b1-csi2"; + reg = <0 0xfea80000 0 0x10000>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 714>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 714>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi20vin0: endpoint@0 { + reg = <0>; + remote-endpoint = <&vin0csi20>; + }; + csi20vin1: endpoint@1 { + reg = <1>; + remote-endpoint = <&vin1csi20>; + }; + csi20vin2: endpoint@2 { + reg = <2>; + remote-endpoint = <&vin2csi20>; + }; + csi20vin3: endpoint@3 { + reg = <3>; + remote-endpoint = <&vin3csi20>; + }; + csi20vin4: endpoint@4 { + reg = <4>; + remote-endpoint = <&vin4csi20>; + }; + csi20vin5: endpoint@5 { + reg = <5>; + remote-endpoint = <&vin5csi20>; + }; + csi20vin6: endpoint@6 { + reg = <6>; + remote-endpoint = <&vin6csi20>; + }; + csi20vin7: endpoint@7 { + reg = <7>; + remote-endpoint = <&vin7csi20>; + }; + }; + }; + }; + + csi40: csi2@feaa0000 { + compatible = "renesas,r8a774b1-csi2"; + reg = <0 0xfeaa0000 0 0x10000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi40vin0: endpoint@0 { + reg = <0>; + remote-endpoint = <&vin0csi40>; + }; + csi40vin1: endpoint@1 { + reg = <1>; + remote-endpoint = <&vin1csi40>; + }; + csi40vin2: endpoint@2 { + reg = <2>; + remote-endpoint = <&vin2csi40>; + }; + csi40vin3: endpoint@3 { + reg = <3>; + remote-endpoint = <&vin3csi40>; + }; + csi40vin4: endpoint@4 { + reg = <4>; + remote-endpoint = <&vin4csi40>; + }; + csi40vin5: endpoint@5 { + reg = <5>; + remote-endpoint = <&vin5csi40>; + }; + csi40vin6: endpoint@6 { + reg = <6>; + remote-endpoint = <&vin6csi40>; + }; + csi40vin7: endpoint@7 { + reg = <7>; + remote-endpoint = <&vin7csi40>; + }; + }; + }; + }; + + hdmi0: hdmi@fead0000 { + compatible = "renesas,r8a774b1-hdmi", + "renesas,rcar-gen3-hdmi"; + reg = <0 0xfead0000 0 0x10000>; + interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 729>, + <&cpg CPG_CORE R8A774B1_CLK_HDMI>; + clock-names = "iahb", "isfr"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 729>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dw_hdmi0_in: endpoint { + remote-endpoint = <&du_out_hdmi0>; + }; + }; + port@1 { + reg = <1>; + }; + port@2 { + /* HDMI sound */ + reg = <2>; + }; + }; + }; + + du: display@feb00000 { + compatible = "renesas,du-r8a774b1"; + reg = <0 0xfeb00000 0 0x80000>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 721>; + clock-names = "du.0", "du.1", "du.3"; + status = "disabled"; + + vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_hdmi0: endpoint { + remote-endpoint = <&dw_hdmi0_in>; + }; + }; + port@2 { + reg = <2>; + du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + }; + }; + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a774b1-lvds"; + reg = <0 0xfeb90000 0 0x14>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 727>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { + }; + }; + }; + }; + + prr: chipid@fff00044 { + compatible = "renesas,prr"; + reg = <0 0xfff00044 0 4>; + }; + }; + + thermal-zones { + sensor_thermal1: sensor-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 0>; + sustainable-power = <2439>; + + trips { + sensor1_crit: sensor1-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + sensor_thermal2: sensor-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 1>; + sustainable-power = <2439>; + + trips { + sensor2_crit: sensor2-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + sensor_thermal3: sensor-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 2>; + sustainable-power = <2439>; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&a57_0 0 2>; + contribution = <1024>; + }; + }; + trips { + target: trip-point1 { + temperature = <100000>; + hysteresis = <1000>; + type = "passive"; + }; + + sensor3_crit: sensor3-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + /* External USB clocks - can be overridden by the board */ + usb3s0_clk: usb3s0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index a1c2de90e470..c7bdc3606323 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -73,9 +73,11 @@ compatible = "arm,cortex-a53"; reg = <0>; device_type = "cpu"; + #cooling-cells = <2>; power-domains = <&sysc R8A774C0_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + dynamic-power-coefficient = <277>; clocks = <&cpg CPG_CORE R8A774C0_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -1905,18 +1907,30 @@ thermal-zones { cpu-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&thermal>; + polling-delay = <0>; + thermal-sensors = <&thermal 0>; + sustainable-power = <717>; cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&a53_0 0 2>; + contribution = <1024>; + }; }; trips { - cpu-crit { + sensor1_crit: sensor1-crit { temperature = <120000>; hysteresis = <2000>; type = "critical"; }; + + target: trip-point1 { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; + }; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi index e4650ae5b75a..14d8513d2a47 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi @@ -30,7 +30,7 @@ }; &du { - vsps = <&vspd0 &vspd1 &vspd2 &vspd3>; + vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd3 0>; }; &fcpvb1 { diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index 95deff66eeb6..fde6ec122d3b 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -155,6 +155,7 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; dynamic-power-coefficient = <854>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; @@ -169,6 +170,7 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU1>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; capacity-dmips-mhz = <1024>; @@ -182,6 +184,7 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU2>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; capacity-dmips-mhz = <1024>; @@ -195,6 +198,7 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU3>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; capacity-dmips-mhz = <1024>; @@ -208,6 +212,7 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; #cooling-cells = <2>; dynamic-power-coefficient = <277>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; @@ -222,6 +227,7 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU1>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -234,6 +240,7 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU2>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -246,6 +253,7 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU3>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -264,6 +272,28 @@ cache-unified; cache-level = <2>; }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <400>; + exit-latency-us = <500>; + min-residency-us = <4000>; + }; + + CPU_SLEEP_1: cpu-sleep-1 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <700>; + exit-latency-us = <700>; + min-residency-us = <5000>; + }; + }; }; extal_clk: extal { @@ -2569,6 +2599,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 314>; + iommus = <&ipmmu_ds1 32>; status = "disabled"; }; @@ -2581,6 +2612,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 313>; + iommus = <&ipmmu_ds1 33>; status = "disabled"; }; @@ -2593,6 +2625,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 312>; + iommus = <&ipmmu_ds1 34>; status = "disabled"; }; @@ -2605,6 +2638,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 311>; + iommus = <&ipmmu_ds1 35>; status = "disabled"; }; @@ -2909,6 +2943,42 @@ iommus = <&ipmmu_vi1 10>; }; + cmm0: cmm@fea40000 { + compatible = "renesas,r8a7795-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea40000 0 0x1000>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 711>; + resets = <&cpg 711>; + }; + + cmm1: cmm@fea50000 { + compatible = "renesas,r8a7795-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea50000 0 0x1000>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 710>; + resets = <&cpg 710>; + }; + + cmm2: cmm@fea60000 { + compatible = "renesas,r8a7795-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea60000 0 0x1000>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 709>; + resets = <&cpg 709>; + }; + + cmm3: cmm@fea70000 { + compatible = "renesas,r8a7795-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea70000 0 0x1000>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 708>; + resets = <&cpg 708>; + }; + csi20: csi2@fea80000 { compatible = "renesas,r8a7795-csi2"; reg = <0 0xfea80000 0 0x10000>; @@ -3112,7 +3182,10 @@ <&cpg CPG_MOD 722>, <&cpg CPG_MOD 721>; clock-names = "du.0", "du.1", "du.2", "du.3"; + + renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>, <&cmm3>; vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>; + status = "disabled"; ports { diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index 3dc9d73f589a..b9db882b0351 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -160,6 +160,7 @@ power-domains = <&sysc R8A7796_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; dynamic-power-coefficient = <854>; clocks = <&cpg CPG_CORE R8A7796_CLK_Z>; operating-points-v2 = <&cluster0_opp>; @@ -174,6 +175,7 @@ power-domains = <&sysc R8A7796_PD_CA57_CPU1>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&cpg CPG_CORE R8A7796_CLK_Z>; operating-points-v2 = <&cluster0_opp>; capacity-dmips-mhz = <1024>; @@ -187,6 +189,7 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; #cooling-cells = <2>; dynamic-power-coefficient = <277>; clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; @@ -201,6 +204,7 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU1>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -213,6 +217,7 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU2>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -225,6 +230,7 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU3>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -243,6 +249,28 @@ cache-unified; cache-level = <2>; }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <400>; + exit-latency-us = <500>; + min-residency-us = <4000>; + }; + + CPU_SLEEP_1: cpu-sleep-1 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <700>; + exit-latency-us = <700>; + min-residency-us = <5000>; + }; + }; }; extal_clk: extal { @@ -2366,6 +2394,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 314>; + iommus = <&ipmmu_ds1 32>; status = "disabled"; }; @@ -2378,6 +2407,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 313>; + iommus = <&ipmmu_ds1 33>; status = "disabled"; }; @@ -2390,6 +2420,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 312>; + iommus = <&ipmmu_ds1 34>; status = "disabled"; }; @@ -2402,6 +2433,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 311>; + iommus = <&ipmmu_ds1 35>; status = "disabled"; }; @@ -2613,6 +2645,33 @@ renesas,fcp = <&fcpvi0>; }; + cmm0: cmm@fea40000 { + compatible = "renesas,r8a7796-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea40000 0 0x1000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 711>; + resets = <&cpg 711>; + }; + + cmm1: cmm@fea50000 { + compatible = "renesas,r8a7796-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea50000 0 0x1000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 710>; + resets = <&cpg 710>; + }; + + cmm2: cmm@fea60000 { + compatible = "renesas,r8a7796-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea60000 0 0x1000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 709>; + resets = <&cpg 709>; + }; + csi20: csi2@fea80000 { compatible = "renesas,r8a7796-csi2"; reg = <0 0xfea80000 0 0x10000>; @@ -2763,9 +2822,11 @@ <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>; clock-names = "du.0", "du.1", "du.2"; - status = "disabled"; - vsps = <&vspd0 &vspd1 &vspd2>; + renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>; + vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>; + + status = "disabled"; ports { #address-cells = <1>; diff --git a/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts new file mode 100644 index 000000000000..4abd78ac1cd5 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Salvator-X 2nd version board with R-Car M3-W+ + * + * Copyright (C) 2018 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a77961.dtsi" +#include "salvator-xs.dtsi" + +/ { + model = "Renesas Salvator-X 2nd version board based on r8a77961"; + compatible = "renesas,salvator-xs", "renesas,r8a77961"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@400000000 { + device_type = "memory"; + reg = <0x4 0x80000000 0x0 0x80000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x1 0x00000000>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi new file mode 100644 index 000000000000..64466c86b698 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi @@ -0,0 +1,723 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the R-Car M3-W+ (R8A77961) SoC + * + * Copyright (C) 2016-2017 Renesas Electronics Corp. + */ + +#include <dt-bindings/clock/r8a77961-cpg-mssr.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/r8a77961-sysc.h> + +#define CPG_AUDIO_CLK_I R8A77961_CLK_S0D4 + +/ { + compatible = "renesas,r8a77961"; + #address-cells = <2>; + #size-cells = <2>; + + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <900000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + opp-1700000000 { + opp-hz = /bits/ 64 <1700000000>; + opp-microvolt = <900000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <960000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + }; + + cluster1_opp: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&a57_0>; + }; + core1 { + cpu = <&a57_1>; + }; + }; + + cluster1 { + core0 { + cpu = <&a53_0>; + }; + core1 { + cpu = <&a53_1>; + }; + core2 { + cpu = <&a53_2>; + }; + core3 { + cpu = <&a53_3>; + }; + }; + }; + + a57_0: cpu@0 { + compatible = "arm,cortex-a57"; + reg = <0x0>; + device_type = "cpu"; + power-domains = <&sysc R8A77961_PD_CA57_CPU0>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + dynamic-power-coefficient = <854>; + clocks = <&cpg CPG_CORE R8A77961_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; + }; + + a57_1: cpu@1 { + compatible = "arm,cortex-a57"; + reg = <0x1>; + device_type = "cpu"; + power-domains = <&sysc R8A77961_PD_CA57_CPU1>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&cpg CPG_CORE R8A77961_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; + }; + + a53_0: cpu@100 { + compatible = "arm,cortex-a53"; + reg = <0x100>; + device_type = "cpu"; + power-domains = <&sysc R8A77961_PD_CA53_CPU0>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; + #cooling-cells = <2>; + dynamic-power-coefficient = <277>; + clocks = <&cpg CPG_CORE R8A77961_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <535>; + }; + + a53_1: cpu@101 { + compatible = "arm,cortex-a53"; + reg = <0x101>; + device_type = "cpu"; + power-domains = <&sysc R8A77961_PD_CA53_CPU1>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; + clocks = <&cpg CPG_CORE R8A77961_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <535>; + }; + + a53_2: cpu@102 { + compatible = "arm,cortex-a53"; + reg = <0x102>; + device_type = "cpu"; + power-domains = <&sysc R8A77961_PD_CA53_CPU2>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; + clocks = <&cpg CPG_CORE R8A77961_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <535>; + }; + + a53_3: cpu@103 { + compatible = "arm,cortex-a53"; + reg = <0x103>; + device_type = "cpu"; + power-domains = <&sysc R8A77961_PD_CA53_CPU3>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; + clocks = <&cpg CPG_CORE R8A77961_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <535>; + }; + + L2_CA57: cache-controller-0 { + compatible = "cache"; + power-domains = <&sysc R8A77961_PD_CA57_SCU>; + cache-unified; + cache-level = <2>; + }; + + L2_CA53: cache-controller-1 { + compatible = "cache"; + power-domains = <&sysc R8A77961_PD_CA53_SCU>; + cache-unified; + cache-level = <2>; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <400>; + exit-latency-us = <500>; + min-residency-us = <4000>; + }; + + CPU_SLEEP_1: cpu-sleep-1 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <700>; + exit-latency-us = <700>; + min-residency-us = <5000>; + }; + }; + }; + + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + extalr_clk: extalr { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>; + }; + + pmu_a57 { + compatible = "arm,cortex-a57-pmu"; + interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a57_0>, <&a57_1>; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + rwdt: watchdog@e6020000 { + reg = <0 0xe6020000 0 0x0c>; + /* placeholder */ + }; + + gpio2: gpio@e6052000 { + reg = <0 0xe6052000 0 0x50>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + /* placeholder */ + }; + + gpio3: gpio@e6053000 { + reg = <0 0xe6053000 0 0x50>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + /* placeholder */ + }; + + gpio4: gpio@e6054000 { + reg = <0 0xe6054000 0 0x50>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + /* placeholder */ + }; + + gpio5: gpio@e6055000 { + reg = <0 0xe6055000 0 0x50>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + /* placeholder */ + }; + + gpio6: gpio@e6055400 { + reg = <0 0xe6055400 0 0x50>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + /* placeholder */ + }; + + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a77961"; + reg = <0 0xe6060000 0 0x50c>; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a77961-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&extalr_clk>; + clock-names = "extal", "extalr"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a77961-rst"; + reg = <0 0xe6160000 0 0x0200>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a77961-sysc"; + reg = <0 0xe6180000 0 0x0400>; + #power-domain-cells = <1>; + }; + + intc_ex: interrupt-controller@e61c0000 { + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + /* placeholder */ + }; + + i2c2: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0xe6510000 0 0x40>; + /* placeholder */ + }; + + i2c4: i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0xe66d8000 0 0x40>; + /* placeholder */ + }; + + i2c_dvfs: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0xe60b0000 0 0x425>; + /* placeholder */ + }; + + hscif1: serial@e6550000 { + reg = <0 0xe6550000 0 0x60>; + /* placeholder */ + }; + + hsusb: usb@e6590000 { + reg = <0 0xe6590000 0 0x200>; + /* placeholder */ + }; + + usb3_phy0: usb-phy@e65ee000 { + reg = <0 0xe65ee000 0 0x90>; + #phy-cells = <0>; + /* placeholder */ + }; + + avb: ethernet@e6800000 { + reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + /* placeholder */ + }; + + pwm1: pwm@e6e31000 { + reg = <0 0xe6e31000 0 8>; + #pwm-cells = <2>; + /* placeholder */ + }; + + scif1: serial@e6e68000 { + reg = <0 0xe6e68000 0 64>; + /* placeholder */ + }; + + scif2: serial@e6e88000 { + compatible = "renesas,scif-r8a77961", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e88000 0 64>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 310>, + <&cpg CPG_CORE R8A77961_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 310>; + status = "disabled"; + }; + + vin0: video@e6ef0000 { + reg = <0 0xe6ef0000 0 0x1000>; + /* placeholder */ + }; + + vin1: video@e6ef1000 { + reg = <0 0xe6ef1000 0 0x1000>; + /* placeholder */ + }; + + vin2: video@e6ef2000 { + reg = <0 0xe6ef2000 0 0x1000>; + /* placeholder */ + }; + + vin3: video@e6ef3000 { + reg = <0 0xe6ef3000 0 0x1000>; + /* placeholder */ + }; + + vin4: video@e6ef4000 { + reg = <0 0xe6ef4000 0 0x1000>; + /* placeholder */ + }; + + vin5: video@e6ef5000 { + reg = <0 0xe6ef5000 0 0x1000>; + /* placeholder */ + }; + + vin6: video@e6ef6000 { + reg = <0 0xe6ef6000 0 0x1000>; + /* placeholder */ + }; + + vin7: video@e6ef7000 { + reg = <0 0xe6ef7000 0 0x1000>; + /* placeholder */ + }; + + rcar_sound: sound@ec500000 { + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ + /* placeholder */ + rcar_sound,dvc { + dvc0: dvc-0 { }; + dvc1: dvc-1 { }; + }; + + rcar_sound,src { + src0: src-0 { }; + src1: src-1 { }; + }; + + rcar_sound,ssi { + ssi0: ssi-0 { }; + ssi1: ssi-1 { }; + }; + }; + + xhci0: usb@ee000000 { + reg = <0 0xee000000 0 0xc00>; + /* placeholder */ + }; + + usb3_peri0: usb@ee020000 { + reg = <0 0xee020000 0 0x400>; + /* placeholder */ + }; + + ohci0: usb@ee080000 { + reg = <0 0xee080000 0 0x100>; + /* placeholder */ + }; + + ohci1: usb@ee0a0000 { + reg = <0 0xee0a0000 0 0x100>; + /* placeholder */ + }; + + ehci0: usb@ee080100 { + reg = <0 0xee080100 0 0x100>; + /* placeholder */ + }; + + ehci1: usb@ee0a0100 { + reg = <0 0xee0a0100 0 0x100>; + /* placeholder */ + }; + + usb2_phy0: usb-phy@ee080200 { + reg = <0 0xee080200 0 0x700>; + /* placeholder */ + }; + + usb2_phy1: usb-phy@ee0a0200 { + reg = <0 0xee0a0200 0 0x700>; + /* placeholder */ + }; + + sdhi0: sd@ee100000 { + reg = <0 0xee100000 0 0x2000>; + /* placeholder */ + }; + + sdhi2: sd@ee140000 { + reg = <0 0xee140000 0 0x2000>; + /* placeholder */ + }; + + sdhi3: sd@ee160000 { + reg = <0 0xee160000 0 0x2000>; + /* placeholder */ + }; + + gic: interrupt-controller@f1010000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xf1010000 0 0x1000>, + <0x0 0xf1020000 0 0x20000>, + <0x0 0xf1040000 0 0x20000>, + <0x0 0xf1060000 0 0x20000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 408>; + }; + + pciec0: pcie@fe000000 { + reg = <0 0xfe000000 0 0x80000>; + /* placeholder */ + }; + + pciec1: pcie@ee800000 { + reg = <0 0xee800000 0 0x80000>; + /* placeholder */ + }; + + csi20: csi2@fea80000 { + reg = <0 0xfea80000 0 0x10000>; + /* placeholder */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + + csi40: csi2@feaa0000 { + reg = <0 0xfeaa0000 0 0x10000>; + /* placeholder */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + }; + }; + }; + + hdmi0: hdmi@fead0000 { + reg = <0 0xfead0000 0 0x10000>; + /* placeholder */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { + reg = <1>; + }; + port@2 { + /* HDMI sound */ + reg = <2>; + }; + }; + }; + + du: display@feb00000 { + reg = <0 0xfeb00000 0 0x70000>; + /* placeholder */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_hdmi0: endpoint { + }; + }; + port@2 { + reg = <2>; + du_out_lvds0: endpoint { + }; + }; + }; + }; + + prr: chipid@fff00044 { + compatible = "renesas,prr"; + reg = <0 0xfff00044 0 4>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + }; + + /* External USB clocks - can be overridden by the board */ + usb3s0_clk: usb3s0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index 4ae163220f60..bdbe197774d2 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -2105,6 +2105,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 314>; + iommus = <&ipmmu_ds1 32>; status = "disabled"; }; @@ -2117,6 +2118,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 313>; + iommus = <&ipmmu_ds1 33>; status = "disabled"; }; @@ -2129,6 +2131,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 312>; + iommus = <&ipmmu_ds1 34>; status = "disabled"; }; @@ -2141,6 +2144,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 311>; + iommus = <&ipmmu_ds1 35>; status = "disabled"; }; @@ -2320,6 +2324,33 @@ resets = <&cpg 611>; }; + cmm0: cmm@fea40000 { + compatible = "renesas,r8a77965-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea40000 0 0x1000>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 711>; + resets = <&cpg 711>; + }; + + cmm1: cmm@fea50000 { + compatible = "renesas,r8a77965-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea50000 0 0x1000>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 710>; + resets = <&cpg 710>; + }; + + cmm3: cmm@fea70000 { + compatible = "renesas,r8a77965-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea70000 0 0x1000>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 708>; + resets = <&cpg 708>; + }; + csi20: csi2@fea80000 { compatible = "renesas,r8a77965-csi2"; reg = <0 0xfea80000 0 0x10000>; @@ -2467,10 +2498,12 @@ <&cpg CPG_MOD 723>, <&cpg CPG_MOD 721>; clock-names = "du.0", "du.1", "du.3"; - status = "disabled"; + renesas,cmms = <&cmm0>, <&cmm1>, <&cmm3>; vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>; + status = "disabled"; + ports { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi index 0cd3b376635d..0d0558e53533 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi @@ -652,7 +652,7 @@ }; pwm3: pwm@e6e33000 { - compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + compatible = "renesas,pwm-r8a77970", "renesas,pwm-rcar"; reg = <0 0xe6e33000 0 8>; #pwm-cells = <2>; clocks = <&cpg CPG_MOD 523>; @@ -1035,6 +1035,7 @@ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 314>; max-frequency = <200000000>; + iommus = <&ipmmu_ds1 32>; status = "disabled"; }; @@ -1120,7 +1121,7 @@ clock-names = "du.0"; power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 724>; - vsps = <&vspd0>; + vsps = <&vspd0 0>; status = "disabled"; ports { diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi index 461a47ea656d..4d86669af819 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi @@ -1338,6 +1338,7 @@ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 314>; max-frequency = <200000000>; + iommus = <&ipmmu_ds1 32>; status = "disabled"; }; @@ -1495,7 +1496,7 @@ clock-names = "du.0"; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 724>; - vsps = <&vspd0>; + vsps = <&vspd0 0>; status = "disabled"; ports { diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index 455954c3d98e..67a6824a962c 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -1580,6 +1580,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 314>; + iommus = <&ipmmu_ds1 32>; status = "disabled"; }; @@ -1592,6 +1593,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 313>; + iommus = <&ipmmu_ds1 33>; status = "disabled"; }; @@ -1604,6 +1606,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 311>; + iommus = <&ipmmu_ds1 35>; status = "disabled"; }; @@ -1727,6 +1730,24 @@ iommus = <&ipmmu_vi0 9>; }; + cmm0: cmm@fea40000 { + compatible = "renesas,r8a77990-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea40000 0 0x1000>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 711>; + resets = <&cpg 711>; + }; + + cmm1: cmm@fea50000 { + compatible = "renesas,r8a77990-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea50000 0 0x1000>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 710>; + resets = <&cpg 710>; + }; + csi40: csi2@feaa0000 { compatible = "renesas,r8a77990-csi2"; reg = <0 0xfeaa0000 0 0x10000>; @@ -1768,7 +1789,10 @@ clock-names = "du.0", "du.1"; resets = <&cpg 724>; reset-names = "du.0"; + + renesas,cmms = <&cmm0>, <&cmm1>; vsps = <&vspd0 0>, <&vspd1 0>; + status = "disabled"; ports { diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index 183fef86cf7c..e6ee2b709ba6 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -916,6 +916,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; resets = <&cpg 312>; + iommus = <&ipmmu_ds1 34>; status = "disabled"; }; @@ -993,6 +994,24 @@ iommus = <&ipmmu_vi0 9>; }; + cmm0: cmm@fea40000 { + compatible = "renesas,r8a77995-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea40000 0 0x1000>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 711>; + resets = <&cpg 711>; + }; + + cmm1: cmm@fea50000 { + compatible = "renesas,r8a77995-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea50000 0 0x1000>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 710>; + resets = <&cpg 710>; + }; + du: display@feb00000 { compatible = "renesas,du-r8a77995"; reg = <0 0xfeb00000 0 0x40000>; @@ -1003,7 +1022,10 @@ clock-names = "du.0", "du.1"; resets = <&cpg 724>; reset-names = "du.0"; + + renesas,cmms = <&cmm0>, <&cmm1>; vsps = <&vspd0 0>, <&vspd1 0>; + status = "disabled"; ports { diff --git a/arch/arm64/boot/dts/renesas/rzg2-advantech-idk-1110wr-panel.dtsi b/arch/arm64/boot/dts/renesas/rzg2-advantech-idk-1110wr-panel.dtsi new file mode 100644 index 000000000000..bcc21178ae04 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/rzg2-advantech-idk-1110wr-panel.dtsi @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Advantech idk-1110wr LVDS panel connected + * to RZ/G2 boards + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +/ { + panel-lvds { + compatible = "advantech,idk-1110wr", "panel-lvds"; + + width-mm = <223>; + height-mm = <125>; + + data-mapping = "jeida-24"; + + panel-timing { + /* 1024x600 @60Hz */ + clock-frequency = <51200000>; + hactive = <1024>; + vactive = <600>; + hsync-len = <240>; + hfront-porch = <40>; + hback-porch = <40>; + vfront-porch = <15>; + vback-porch = <10>; + vsync-len = <10>; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds_connector>; + }; + }; + }; +}; + +&lvds_connector { + remote-endpoint = <&panel_in>; +}; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 1f18a9392d15..48fb631d5451 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -1,5 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb @@ -27,6 +30,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts index 6eb7407a84aa..936ed7d71ffc 100644 --- a/arch/arm64/boot/dts/rockchip/px30-evb.dts +++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts @@ -14,7 +14,7 @@ compatible = "rockchip,px30-evb", "rockchip,px30"; chosen { - stdout-path = "serial2:1500000n8"; + stdout-path = "serial5:115200n8"; }; adc-keys { @@ -58,6 +58,14 @@ backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm1 0 25000 0>; + power-supply = <&vcc3v3_lcd>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + pinctrl-0 = <&emmc_reset>; + pinctrl-names = "default"; + reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>; }; sdio_pwrseq: sdio-pwrseq { @@ -74,13 +82,6 @@ reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */ }; - vcc_phy: vcc-phy-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_phy"; - regulator-always-on; - regulator-boot-on; - }; - vcc5v0_sys: vccsys { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; @@ -91,6 +92,22 @@ }; }; +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + &display_subsystem { status = "okay"; }; @@ -100,12 +117,15 @@ cap-mmc-highspeed; mmc-hs200-1_8v; non-removable; + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v0>; + vqmmc-supply = <&vccio_flash>; status = "okay"; }; &gmac { clock_in_out = "output"; - phy-supply = <&vcc_phy>; + phy-supply = <&vcc_rmii>; snps,reset-gpio = <&gpio2 13 GPIO_ACTIVE_LOW>; snps,reset-active-low; snps,reset-delays-us = <0 50000 50000>; @@ -114,6 +134,256 @@ &i2c0 { status = "okay"; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <0>; + clock-output-names = "xin32k"; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc5v0_sys>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-name = "vdd_log"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v0: vcc_rmii: DCDC_REG4 { + regulator-name = "vcc_3v0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_sys: DCDC_REG5 { + regulator-name = "vcc3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v0: LDO_REG1 { + regulator-name = "vcc_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_1v8: vccio_flash: vccio_sdio: LDO_REG2 { + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_1v0: LDO_REG3 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc3v0_pmu: LDO_REG4 { + regulator-name = "vcc3v0_pmu"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_sd: LDO_REG6 { + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc2v8_dvp: LDO_REG7 { + regulator-name = "vcc2v8_dvp"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <2800000>; + }; + }; + + vcc1v8_dvp: LDO_REG8 { + regulator-name = "vcc1v8_dvp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v5_dvp: LDO_REG9 { + regulator-name = "vcc1v5_dvp"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcc3v3_lcd: SWITCH_REG1 { + regulator-name = "vcc3v3_lcd"; + regulator-boot-on; + }; + + vcc5v0_host: SWITCH_REG2 { + regulator-name = "vcc5v0_host"; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; + + sensor@d { + compatible = "asahi-kasei,ak8963"; + reg = <0x0d>; + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + vdd-supply = <&vcc3v0_pmu>; + mount-matrix = "1", /* x0 */ + "0", /* y0 */ + "0", /* z0 */ + "0", /* x1 */ + "1", /* y1 */ + "0", /* z1 */ + "0", /* x2 */ + "0", /* y2 */ + "1"; /* z2 */ + }; + + touchscreen@14 { + compatible = "goodix,gt1151"; + reg = <0x14>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>; + irq-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; + VDDIO-supply = <&vcc3v3_lcd>; + }; + + sensor@4c { + compatible = "fsl,mma7660"; + reg = <0x4c>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB7 IRQ_TYPE_LEVEL_LOW>; + }; }; &i2s1_2ch { @@ -122,6 +392,13 @@ &io_domains { status = "okay"; + + vccio1-supply = <&vccio_sdio>; + vccio2-supply = <&vccio_sd>; + vccio3-supply = <&vcc_3v0>; + vccio4-supply = <&vcc3v0_pmu>; + vccio5-supply = <&vcc_3v0>; + vccio6-supply = <&vccio_flash>; }; &pinctrl { @@ -132,6 +409,12 @@ }; }; + emmc { + emmc_reset: emmc-reset { + rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int: pmic_int { rockchip,pins = @@ -164,6 +447,9 @@ &pmu_io_domains { status = "okay"; + + pmuio1-supply = <&vcc3v0_pmu>; + pmuio2-supply = <&vcc3v0_pmu>; }; &pwm1 { @@ -171,6 +457,7 @@ }; &saradc { + vref-supply = <&vcc_1v8>; status = "okay"; }; @@ -183,6 +470,8 @@ sd-uhs-sdr25; sd-uhs-sdr50; sd-uhs-sdr104; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; status = "okay"; }; @@ -196,13 +485,25 @@ status = "okay"; }; +&u2phy { + status = "okay"; + + u2phy_host: host-port { + status = "okay"; + }; + + u2phy_otg: otg-port { + status = "okay"; + }; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_xfer &uart1_cts>; status = "okay"; }; -&uart2 { +&uart5 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index eb992d60e6ba..8812b70f3911 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -161,13 +161,6 @@ status = "disabled"; }; - firmware { - optee { - compatible = "linaro,optee-tz"; - method = "smc"; - }; - }; - gmac_clkin: external-gmac-clock { compatible = "fixed-clock"; clock-frequency = <50000000>; @@ -195,13 +188,6 @@ clock-output-names = "xin24m"; }; - xin32k: xin32k { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "xin32k"; - }; - pmu: power-management@ff000000 { compatible = "rockchip,px30-pmu", "syscon", "simple-mfd"; reg = <0x0 0xff000000 0x0 0x1000>; @@ -671,36 +657,102 @@ status = "disabled"; }; + otp: nvmem@ff290000 { + compatible = "rockchip,px30-otp"; + reg = <0x0 0xff290000 0x0 0x4000>; + clocks = <&cru SCLK_OTP_USR>, <&cru PCLK_OTP_NS>, + <&cru PCLK_OTP_PHY>; + clock-names = "otp", "apb_pclk", "phy"; + resets = <&cru SRST_OTP_PHY>; + reset-names = "phy"; + #address-cells = <1>; + #size-cells = <1>; + + /* Data cells */ + cpu_id: id@7 { + reg = <0x07 0x10>; + }; + cpu_leakage: cpu-leakage@17 { + reg = <0x17 0x1>; + }; + performance: performance@1e { + reg = <0x1e 0x1>; + bits = <4 3>; + }; + }; + cru: clock-controller@ff2b0000 { compatible = "rockchip,px30-cru"; reg = <0x0 0xff2b0000 0x0 0x1000>; + clocks = <&xin24m>, <&pmucru PLL_GPLL>; + clock-names = "xin24m", "gpll"; rockchip,grf = <&grf>; #clock-cells = <1>; #reset-cells = <1>; - assigned-clocks = <&cru PLL_NPLL>; - assigned-clock-rates = <1188000000>; + assigned-clocks = <&cru PLL_NPLL>, + <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>, + <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>, + <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>; + + assigned-clock-rates = <1188000000>, + <200000000>, <200000000>, + <150000000>, <150000000>, + <100000000>, <200000000>; }; pmucru: clock-controller@ff2bc000 { compatible = "rockchip,px30-pmucru"; reg = <0x0 0xff2bc000 0x0 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; rockchip,grf = <&grf>; #clock-cells = <1>; #reset-cells = <1>; assigned-clocks = <&pmucru PLL_GPLL>, <&pmucru PCLK_PMU_PRE>, - <&pmucru SCLK_WIFI_PMU>, <&cru ARMCLK>, - <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>, - <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>, - <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>; + <&pmucru SCLK_WIFI_PMU>; assigned-clock-rates = <1200000000>, <100000000>, - <26000000>, <600000000>, - <200000000>, <200000000>, - <150000000>, <150000000>, - <100000000>, <200000000>; + <26000000>; + }; + + usb2phy_grf: syscon@ff2c0000 { + compatible = "rockchip,px30-usb2phy-grf", "syscon", + "simple-mfd"; + reg = <0x0 0xff2c0000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + + u2phy: usb2-phy@100 { + compatible = "rockchip,px30-usb2phy"; + reg = <0x100 0x20>; + clocks = <&pmucru SCLK_USBPHY_REF>; + clock-names = "phyclk"; + #clock-cells = <0>; + assigned-clocks = <&cru USB480M>; + assigned-clock-parents = <&u2phy>; + clock-output-names = "usb480m_phy"; + status = "disabled"; + + u2phy_host: host-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "linestate"; + status = "disabled"; + }; + + u2phy_otg: otg-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "otg-bvalid", "otg-id", + "linestate"; + status = "disabled"; + }; + }; }; usb20_otg: usb@ff300000 { @@ -715,6 +767,8 @@ g-rx-fifo-size = <280>; g-tx-fifo-size = <256 128 128 64 32 16>; g-use-dma; + phys = <&u2phy_otg>; + phy-names = "usb2-phy"; power-domains = <&power PX30_PD_USB>; status = "disabled"; }; @@ -725,6 +779,8 @@ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST>; clock-names = "usbhost"; + phys = <&u2phy_host>; + phy-names = "usb"; power-domains = <&power PX30_PD_USB>; status = "disabled"; }; @@ -735,6 +791,8 @@ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST>; clock-names = "usbhost"; + phys = <&u2phy_host>; + phy-names = "usb"; power-domains = <&power PX30_PD_USB>; status = "disabled"; }; @@ -801,6 +859,8 @@ clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; fifo-depth = <0x100>; max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; power-domains = <&power PX30_PD_MMC_NAND>; status = "disabled"; }; @@ -831,7 +891,7 @@ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vopb_mmu"; clocks = <&cru ACLK_VOPB>, <&cru HCLK_VOPB>; - clock-names = "aclk", "hclk"; + clock-names = "aclk", "iface"; power-domains = <&power PX30_PD_VO>; #iommu-cells = <0>; status = "disabled"; @@ -863,7 +923,7 @@ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vopl_mmu"; clocks = <&cru ACLK_VOPL>, <&cru HCLK_VOPL>; - clock-names = "aclk", "hclk"; + clock-names = "aclk", "iface"; power-domains = <&power PX30_PD_VO>; #iommu-cells = <0>; status = "disabled"; @@ -1164,11 +1224,6 @@ rockchip,pins = <0 RK_PB5 1 &pcfg_pull_none>; }; - - uart0_rts_gpio: uart0-rts-gpio { - rockchip,pins = - <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; }; uart1 { @@ -1187,11 +1242,6 @@ rockchip,pins = <1 RK_PC3 1 &pcfg_pull_none>; }; - - uart1_rts_gpio: uart1-rts-gpio { - rockchip,pins = - <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; - }; }; uart2-m0 { @@ -1226,11 +1276,6 @@ rockchip,pins = <0 RK_PC3 2 &pcfg_pull_none>; }; - - uart3m0_rts_gpio: uart3m0-rts-gpio { - rockchip,pins = - <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; - }; }; uart3-m1 { @@ -1249,11 +1294,6 @@ rockchip,pins = <1 RK_PB5 2 &pcfg_pull_none>; }; - - uart3m1_rts_gpio: uart3m1-rts-gpio { - rockchip,pins = - <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; }; uart4 { @@ -1602,16 +1642,6 @@ <1 RK_PD4 1 &pcfg_pull_up_8ma>, <1 RK_PD5 1 &pcfg_pull_up_8ma>; }; - - sdmmc_gpio: sdmmc-gpio { - rockchip,pins = - <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up_4ma>, - <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up_4ma>, - <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up_4ma>, - <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up_4ma>, - <1 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up_4ma>, - <1 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up_4ma>; - }; }; sdio { @@ -1632,16 +1662,6 @@ <1 RK_PD0 1 &pcfg_pull_up>, <1 RK_PD1 1 &pcfg_pull_up>; }; - - sdio_gpio: sdio-gpio { - rockchip,pins = - <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; - }; }; emmc { @@ -1655,11 +1675,6 @@ <1 RK_PB2 2 &pcfg_pull_up_8ma>; }; - emmc_pwren: emmc-pwren { - rockchip,pins = - <1 RK_PB0 2 &pcfg_pull_none>; - }; - emmc_rstnout: emmc-rstnout { rockchip,pins = <1 RK_PB3 2 &pcfg_pull_none>; diff --git a/arch/arm64/boot/dts/rockchip/rk3308-evb.dts b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts new file mode 100644 index 000000000000..9b4f855ea5d4 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts @@ -0,0 +1,230 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd + * + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "rk3308.dtsi" + +/ { + model = "Rockchip RK3308 EVB"; + compatible = "rockchip,rk3308-evb", "rockchip,rk3308"; + + chosen { + stdout-path = "serial4:1500000n8"; + }; + + adc-keys0 { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + poll-interval = <100>; + keyup-threshold-microvolt = <1800000>; + + func-key { + linux,code = <KEY_FN>; + label = "function"; + press-threshold-microvolt = <18000>; + }; + }; + + adc-keys1 { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + poll-interval = <100>; + keyup-threshold-microvolt = <1800000>; + + esc-key { + linux,code = <KEY_MICMUTE>; + label = "micmute"; + press-threshold-microvolt = <1130000>; + }; + + home-key { + linux,code = <KEY_MODE>; + label = "mode"; + press-threshold-microvolt = <901000>; + }; + + menu-key { + linux,code = <KEY_PLAY>; + label = "play"; + press-threshold-microvolt = <624000>; + }; + + vol-down-key { + linux,code = <KEY_VOLUMEDOWN>; + label = "volume down"; + press-threshold-microvolt = <300000>; + }; + + vol-up-key { + linux,code = <KEY_VOLUMEUP>; + label = "volume up"; + press-threshold-microvolt = <18000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key>; + + power { + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + label = "GPIO Key Power"; + debounce-interval = <100>; + wakeup-source; + }; + }; + + vcc12v_dcin: vcc12v-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc12v_dcin>; + }; + + vccio_sdio: vcc_1v8: vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_io>; + }; + + vcc_ddr: vcc-ddr { + compatible = "regulator-fixed"; + regulator-name = "vcc_ddr"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_io: vcc-io { + compatible = "regulator-fixed"; + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; + + vccio_flash: vccio-flash { + compatible = "regulator-fixed"; + regulator-name = "vccio_flash"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_io>; + }; + + vcc5v0_host: vcc5v0-host { + compatible = "regulator-fixed"; + gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&usb_drv>; + regulator-name = "vbus_host"; + vin-supply = <&vcc5v0_sys>; + }; + + vdd_core: vdd-core { + compatible = "pwm-regulator"; + pwms = <&pwm0 0 5000 1>; + regulator-name = "vdd_core"; + regulator-min-microvolt = <827000>; + regulator-max-microvolt = <1340000>; + regulator-always-on; + regulator-boot-on; + regulator-settling-time-up-us = <250>; + pwm-supply = <&vcc5v0_sys>; + }; + + vdd_log: vdd-log { + compatible = "regulator-fixed"; + regulator-name = "vdd_log"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; + + vdd_1v0: vdd-1v0 { + compatible = "regulator-fixed"; + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_core>; +}; + +&saradc { + status = "okay"; + vref-supply = <&vcc_1v8>; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&rtc_32k>; + + buttons { + pwr_key: pwr-key { + rockchip,pins = <0 RK_PA6 0 &pcfg_pull_up>; + }; + }; + + usb { + usb_drv: usb-drv { + rockchip,pins = <0 RK_PC5 0 &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PA2 0 &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; + pinctrl-0 = <&pwm0_pin_pull_down>; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_xfer>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts new file mode 100644 index 000000000000..aa256350b18f --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts @@ -0,0 +1,188 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd + */ + +/dts-v1/; +#include "rk3308.dtsi" + +/ { + model = "Firefly ROC-RK3308-CC board"; + compatible = "firefly,roc-rk3308-cc", "rockchip,rk3308"; + chosen { + stdout-path = "serial2:1500000n8"; + }; + + ir_rx { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_recv_pin>; + }; + + ir_tx { + compatible = "pwm-ir-tx"; + pwms = <&pwm5 0 25000 0>; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "firefly:red:power"; + linux,default-trigger = "ir-power-click"; + default-state = "on"; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + }; + + user { + label = "firefly:blue:user"; + linux,default-trigger = "ir-user-click"; + default-state = "off"; + gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_HIGH>; + }; + }; + + typec_vcc5v: typec-vcc5v { + compatible = "regulator-fixed"; + regulator-name = "typec_vcc5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&typec_vcc5v>; + }; + + vcc_io: vcc-io { + compatible = "regulator-fixed"; + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_sdmmc: vcc-sdmmc { + compatible = "regulator-gpio"; + regulator-name = "vcc_sdmmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_HIGH>; + states = <1800000 0x0 + 3300000 0x1>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_sd: vcc-sd { + compatible = "regulator-fixed"; + gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_LOW>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vim-supply = <&vcc_io>; + }; + + vdd_core: vdd-core { + compatible = "pwm-regulator"; + pwms = <&pwm0 0 5000 1>; + regulator-name = "vdd_core"; + regulator-min-microvolt = <827000>; + regulator-max-microvolt = <1340000>; + regulator-init-microvolt = <1015000>; + regulator-settling-time-up-us = <250>; + regulator-always-on; + regulator-boot-on; + pwm-supply = <&vcc5v0_sys>; + }; + + vdd_log: vdd-log { + compatible = "regulator-fixed"; + regulator-name = "vdd_log"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_core>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + mmc-hs200-1_8v; + non-removable; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <400000>; + status = "okay"; + + rtc: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + #clock-cells = <0>; + }; +}; + +&pwm5 { + status = "okay"; + pinctrl-names = "active"; + pinctrl-0 = <&pwm5_pin_pull_down>; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&rtc_32k>; + + ir-receiver { + ir_recv_pin: ir-recv-pin { + rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + buttons { + pwr_key: pwr-key { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pwm0 { + status = "okay"; + pinctrl-0 = <&pwm0_pin_pull_down>; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <300>; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vcc_sdmmc>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi new file mode 100644 index 000000000000..8bdc66c62975 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi @@ -0,0 +1,1739 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd + * + */ + +#include <dt-bindings/clock/rk3308-cru.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,boot-mode.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + compatible = "rockchip,rk3308"; + + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35", "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + clocks = <&cru ARMCLK>; + #cooling-cells = <2>; + dynamic-power-coefficient = <90>; + operating-points-v2 = <&cpu0_opp_table>; + cpu-idle-states = <&CPU_SLEEP>; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35", "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + operating-points-v2 = <&cpu0_opp_table>; + cpu-idle-states = <&CPU_SLEEP>; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a35", "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + operating-points-v2 = <&cpu0_opp_table>; + cpu-idle-states = <&CPU_SLEEP>; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a35", "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + operating-points-v2 = <&cpu0_opp_table>; + cpu-idle-states = <&CPU_SLEEP>; + next-level-cache = <&l2>; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP: cpu-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <120>; + exit-latency-us = <250>; + min-residency-us = <900>; + }; + }; + + l2: l2-cache { + compatible = "cache"; + }; + }; + + cpu0_opp_table: cpu0-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <950000 950000 1340000>; + clock-latency-ns = <40000>; + opp-suspend; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <950000 950000 1340000>; + clock-latency-ns = <40000>; + }; + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <1025000 1025000 1340000>; + clock-latency-ns = <40000>; + }; + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1125000 1125000 1340000>; + clock-latency-ns = <40000>; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + mac_clkin: external-mac-clock { + compatible = "fixed-clock"; + clock-frequency = <50000000>; + clock-output-names = "mac_clkin"; + #clock-cells = <0>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + xin24m: xin24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + }; + + grf: grf@ff000000 { + compatible = "rockchip,rk3308-grf", "syscon", "simple-mfd"; + reg = <0x0 0xff000000 0x0 0x10000>; + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x500>; + mode-bootloader = <BOOT_BL_DOWNLOAD>; + mode-loader = <BOOT_BL_DOWNLOAD>; + mode-normal = <BOOT_NORMAL>; + mode-recovery = <BOOT_RECOVERY>; + mode-fastboot = <BOOT_FASTBOOT>; + }; + }; + + detect_grf: syscon@ff00b000 { + compatible = "rockchip,rk3308-detect-grf", "syscon", "simple-mfd"; + reg = <0x0 0xff00b000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + core_grf: syscon@ff00c000 { + compatible = "rockchip,rk3308-core-grf", "syscon", "simple-mfd"; + reg = <0x0 0xff00c000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + i2c0: i2c@ff040000 { + compatible = "rockchip,rk3308-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xff040000 0x0 0x1000>; + clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@ff050000 { + compatible = "rockchip,rk3308-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xff050000 0x0 0x1000>; + clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@ff060000 { + compatible = "rockchip,rk3308-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xff060000 0x0 0x1000>; + clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@ff070000 { + compatible = "rockchip,rk3308-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xff070000 0x0 0x1000>; + clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3m0_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + wdt: watchdog@ff080000 { + compatible = "snps,dw-wdt"; + reg = <0x0 0xff080000 0x0 0x100>; + clocks = <&cru PCLK_WDT>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart0: serial@ff0a0000 { + compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff0a0000 0x0 0x100>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "disabled"; + }; + + uart1: serial@ff0b0000 { + compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff0b0000 0x0 0x100>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer &uart1_cts &uart1_rts>; + status = "disabled"; + }; + + uart2: serial@ff0c0000 { + compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff0c0000 0x0 0x100>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2m0_xfer>; + status = "disabled"; + }; + + uart3: serial@ff0d0000 { + compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff0d0000 0x0 0x100>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_xfer>; + status = "disabled"; + }; + + uart4: serial@ff0e0000 { + compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff0e0000 0x0 0x100>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_xfer &uart4_cts &uart4_rts>; + status = "disabled"; + }; + + spi0: spi@ff120000 { + compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff120000 0x0 0x1000>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac0 0>, <&dmac0 1>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_clk &spi0_csn0 &spi0_miso &spi0_mosi>; + status = "disabled"; + }; + + spi1: spi@ff130000 { + compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff130000 0x0 0x1000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac0 2>, <&dmac0 3>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_clk &spi1_csn0 &spi1_miso &spi1_mosi>; + status = "disabled"; + }; + + spi2: spi@ff140000 { + compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff140000 0x0 0x1000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac1 16>, <&dmac1 17>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_clk &spi2_csn0 &spi2_miso &spi2_mosi>; + status = "disabled"; + }; + + pwm8: pwm@ff160000 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff160000 0x0 0x10>; + clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm8_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm9: pwm@ff160010 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff160010 0x0 0x10>; + clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm9_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm10: pwm@ff160020 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff160020 0x0 0x10>; + clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm10_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm11: pwm@ff160030 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff160030 0x0 0x10>; + clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm11_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm4: pwm@ff170000 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff170000 0x0 0x10>; + clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm4_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm5: pwm@ff170010 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff170010 0x0 0x10>; + clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm5_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm6: pwm@ff170020 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff170020 0x0 0x10>; + clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm6_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm7: pwm@ff170030 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff170030 0x0 0x10>; + clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm7_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm0: pwm@ff180000 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff180000 0x0 0x10>; + clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm1: pwm@ff180010 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff180010 0x0 0x10>; + clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm2: pwm@ff180020 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff180020 0x0 0x10>; + clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm3: pwm@ff180030 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff180030 0x0 0x10>; + clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + rktimer: rktimer@ff1a0000 { + compatible = "rockchip,rk3288-timer"; + reg = <0x0 0xff1a0000 0x0 0x20>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER0>; + clock-names = "pclk", "timer"; + }; + + saradc: saradc@ff1e0000 { + compatible = "rockchip,rk3308-saradc", "rockchip,rk3399-saradc"; + reg = <0x0 0xff1e0000 0x0 0x100>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + #io-channel-cells = <1>; + resets = <&cru SRST_SARADC_P>; + reset-names = "saradc-apb"; + status = "disabled"; + }; + + amba { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dmac0: dma-controller@ff2c0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff2c0000 0x0 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_DMAC0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + + dmac1: dma-controller@ff2d0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff2d0000 0x0 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_DMAC1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + }; + + i2s_2ch_0: i2s@ff350000 { + compatible = "rockchip,rk3308-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xff350000 0x0 0x1000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_I2S0_2CH>, <&cru HCLK_I2S0_2CH>; + clock-names = "i2s_clk", "i2s_hclk"; + dmas = <&dmac1 8>, <&dmac1 9>; + dma-names = "tx", "rx"; + resets = <&cru SRST_I2S0_2CH_M>, <&cru SRST_I2S0_2CH_H>; + reset-names = "reset-m", "reset-h"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s_2ch_0_sclk + &i2s_2ch_0_lrck + &i2s_2ch_0_sdi + &i2s_2ch_0_sdo>; + status = "disabled"; + }; + + i2s_2ch_1: i2s@ff360000 { + compatible = "rockchip,rk3308-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xff360000 0x0 0x1000>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_I2S1_2CH>, <&cru HCLK_I2S1_2CH>; + clock-names = "i2s_clk", "i2s_hclk"; + dmas = <&dmac1 11>; + dma-names = "rx"; + resets = <&cru SRST_I2S1_2CH_M>, <&cru SRST_I2S1_2CH_H>; + reset-names = "reset-m", "reset-h"; + status = "disabled"; + }; + + spdif_tx: spdif-tx@ff3a0000 { + compatible = "rockchip,rk3308-spdif", "rockchip,rk3328-spdif"; + reg = <0x0 0xff3a0000 0x0 0x1000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SPDIF_TX>, <&cru HCLK_SPDIFTX>; + clock-names = "mclk", "hclk"; + dmas = <&dmac1 13>; + dma-names = "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spdif_out>; + status = "disabled"; + }; + + sdmmc: dwmmc@ff480000 { + compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff480000 0x0 0x4000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + bus-width = <4>; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>; + status = "disabled"; + }; + + emmc: dwmmc@ff490000 { + compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff490000 0x0 0x4000>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + bus-width = <8>; + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, + <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <150000000>; + status = "disabled"; + }; + + sdio: dwmmc@ff4a0000 { + compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff4a0000 0x0 0x4000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + bus-width = <4>; + clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, + <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio_bus4 &sdio_cmd &sdio_clk>; + status = "disabled"; + }; + + cru: clock-controller@ff500000 { + compatible = "rockchip,rk3308-cru"; + reg = <0x0 0xff500000 0x0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + rockchip,grf = <&grf>; + + assigned-clocks = <&cru SCLK_RTC32K>; + assigned-clock-rates = <32768>; + }; + + gic: interrupt-controller@ff580000 { + compatible = "arm,gic-400"; + reg = <0x0 0xff581000 0x0 0x1000>, + <0x0 0xff582000 0x0 0x2000>, + <0x0 0xff584000 0x0 0x2000>, + <0x0 0xff586000 0x0 0x2000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <3>; + interrupt-controller; + #address-cells = <0>; + }; + + sram: sram@fff80000 { + compatible = "mmio-sram"; + reg = <0x0 0xfff80000 0x0 0x40000>; + ranges = <0 0x0 0xfff80000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + + /* reserved for ddr dvfs and system suspend/resume */ + ddr-sram@0 { + reg = <0x0 0x8000>; + }; + + /* reserved for vad audio buffer */ + vad_sram: vad-sram@8000 { + reg = <0x8000 0x38000>; + }; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rk3308-pinctrl"; + rockchip,grf = <&grf>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio0: gpio0@ff220000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff220000 0x0 0x100>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO0>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio1@ff230000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff230000 0x0 0x100>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO1>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio2@ff240000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff240000 0x0 0x100>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO2>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio3@ff250000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff250000 0x0 0x100>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO3>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio4@ff260000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff260000 0x0 0x100>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_up: pcfg-pull-up { + bias-pull-up; + }; + + pcfg_pull_down: pcfg-pull-down { + bias-pull-down; + }; + + pcfg_pull_none: pcfg-pull-none { + bias-disable; + }; + + pcfg_pull_none_2ma: pcfg-pull-none-2ma { + bias-disable; + drive-strength = <2>; + }; + + pcfg_pull_up_2ma: pcfg-pull-up-2ma { + bias-pull-up; + drive-strength = <2>; + }; + + pcfg_pull_up_4ma: pcfg-pull-up-4ma { + bias-pull-up; + drive-strength = <4>; + }; + + pcfg_pull_none_4ma: pcfg-pull-none-4ma { + bias-disable; + drive-strength = <4>; + }; + + pcfg_pull_down_4ma: pcfg-pull-down-4ma { + bias-pull-down; + drive-strength = <4>; + }; + + pcfg_pull_none_8ma: pcfg-pull-none-8ma { + bias-disable; + drive-strength = <8>; + }; + + pcfg_pull_up_8ma: pcfg-pull-up-8ma { + bias-pull-up; + drive-strength = <8>; + }; + + pcfg_pull_none_12ma: pcfg-pull-none-12ma { + bias-disable; + drive-strength = <12>; + }; + + pcfg_pull_up_12ma: pcfg-pull-up-12ma { + bias-pull-up; + drive-strength = <12>; + }; + + pcfg_pull_none_smt: pcfg-pull-none-smt { + bias-disable; + input-schmitt-enable; + }; + + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_output_low: pcfg-output-low { + output-low; + }; + + pcfg_input_high: pcfg-input-high { + bias-pull-up; + input-enable; + }; + + pcfg_input: pcfg-input { + input-enable; + }; + + emmc { + emmc_clk: emmc-clk { + rockchip,pins = + <3 RK_PB1 2 &pcfg_pull_none_8ma>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = + <3 RK_PB0 2 &pcfg_pull_up_8ma>; + }; + + emmc_pwren: emmc-pwren { + rockchip,pins = + <3 RK_PB3 2 &pcfg_pull_none>; + }; + + emmc_rstn: emmc-rstn { + rockchip,pins = + <3 RK_PB2 2 &pcfg_pull_none>; + }; + + emmc_bus1: emmc-bus1 { + rockchip,pins = + <3 RK_PA0 2 &pcfg_pull_up_8ma>; + }; + + emmc_bus4: emmc-bus4 { + rockchip,pins = + <3 RK_PA0 2 &pcfg_pull_up_8ma>, + <3 RK_PA1 2 &pcfg_pull_up_8ma>, + <3 RK_PA2 2 &pcfg_pull_up_8ma>, + <3 RK_PA3 2 &pcfg_pull_up_8ma>; + }; + + emmc_bus8: emmc-bus8 { + rockchip,pins = + <3 RK_PA0 2 &pcfg_pull_up_8ma>, + <3 RK_PA1 2 &pcfg_pull_up_8ma>, + <3 RK_PA2 2 &pcfg_pull_up_8ma>, + <3 RK_PA3 2 &pcfg_pull_up_8ma>, + <3 RK_PA4 2 &pcfg_pull_up_8ma>, + <3 RK_PA5 2 &pcfg_pull_up_8ma>, + <3 RK_PA6 2 &pcfg_pull_up_8ma>, + <3 RK_PA7 2 &pcfg_pull_up_8ma>; + }; + }; + + flash { + flash_csn0: flash-csn0 { + rockchip,pins = + <3 RK_PB5 1 &pcfg_pull_none>; + }; + + flash_rdy: flash-rdy { + rockchip,pins = + <3 RK_PB4 1 &pcfg_pull_none>; + }; + + flash_ale: flash-ale { + rockchip,pins = + <3 RK_PB3 1 &pcfg_pull_none>; + }; + + flash_cle: flash-cle { + rockchip,pins = + <3 RK_PB1 1 &pcfg_pull_none>; + }; + + flash_wrn: flash-wrn { + rockchip,pins = + <3 RK_PB0 1 &pcfg_pull_none>; + }; + + flash_rdn: flash-rdn { + rockchip,pins = + <3 RK_PB2 1 &pcfg_pull_none>; + }; + + flash_bus8: flash-bus8 { + rockchip,pins = + <3 RK_PA0 1 &pcfg_pull_up_12ma>, + <3 RK_PA1 1 &pcfg_pull_up_12ma>, + <3 RK_PA2 1 &pcfg_pull_up_12ma>, + <3 RK_PA3 1 &pcfg_pull_up_12ma>, + <3 RK_PA4 1 &pcfg_pull_up_12ma>, + <3 RK_PA5 1 &pcfg_pull_up_12ma>, + <3 RK_PA6 1 &pcfg_pull_up_12ma>, + <3 RK_PA7 1 &pcfg_pull_up_12ma>; + }; + }; + + gmac { + rmii_pins: rmii-pins { + rockchip,pins = + /* mac_txen */ + <1 RK_PC1 3 &pcfg_pull_none_12ma>, + /* mac_txd1 */ + <1 RK_PC3 3 &pcfg_pull_none_12ma>, + /* mac_txd0 */ + <1 RK_PC2 3 &pcfg_pull_none_12ma>, + /* mac_rxd0 */ + <1 RK_PC4 3 &pcfg_pull_none>, + /* mac_rxd1 */ + <1 RK_PC5 3 &pcfg_pull_none>, + /* mac_rxer */ + <1 RK_PB7 3 &pcfg_pull_none>, + /* mac_rxdv */ + <1 RK_PC0 3 &pcfg_pull_none>, + /* mac_mdio */ + <1 RK_PB6 3 &pcfg_pull_none>, + /* mac_mdc */ + <1 RK_PB5 3 &pcfg_pull_none>; + }; + + mac_refclk_12ma: mac-refclk-12ma { + rockchip,pins = + <1 RK_PB4 3 &pcfg_pull_none_12ma>; + }; + + mac_refclk: mac-refclk { + rockchip,pins = + <1 RK_PB4 3 &pcfg_pull_none>; + }; + }; + + gmac-m1 { + rmiim1_pins: rmiim1-pins { + rockchip,pins = + /* mac_txen */ + <4 RK_PB7 2 &pcfg_pull_none_12ma>, + /* mac_txd1 */ + <4 RK_PA5 2 &pcfg_pull_none_12ma>, + /* mac_txd0 */ + <4 RK_PA4 2 &pcfg_pull_none_12ma>, + /* mac_rxd0 */ + <4 RK_PA2 2 &pcfg_pull_none>, + /* mac_rxd1 */ + <4 RK_PA3 2 &pcfg_pull_none>, + /* mac_rxer */ + <4 RK_PA0 2 &pcfg_pull_none>, + /* mac_rxdv */ + <4 RK_PA1 2 &pcfg_pull_none>, + /* mac_mdio */ + <4 RK_PB6 2 &pcfg_pull_none>, + /* mac_mdc */ + <4 RK_PB5 2 &pcfg_pull_none>; + }; + + macm1_refclk_12ma: macm1-refclk-12ma { + rockchip,pins = + <4 RK_PB4 2 &pcfg_pull_none_12ma>; + }; + + macm1_refclk: macm1-refclk { + rockchip,pins = + <4 RK_PB4 2 &pcfg_pull_none>; + }; + }; + + i2c0 { + i2c0_xfer: i2c0-xfer { + rockchip,pins = + <1 RK_PD0 2 &pcfg_pull_none_smt>, + <1 RK_PD1 2 &pcfg_pull_none_smt>; + }; + }; + + i2c1 { + i2c1_xfer: i2c1-xfer { + rockchip,pins = + <0 RK_PB3 1 &pcfg_pull_none_smt>, + <0 RK_PB4 1 &pcfg_pull_none_smt>; + }; + }; + + i2c2 { + i2c2_xfer: i2c2-xfer { + rockchip,pins = + <2 RK_PA2 3 &pcfg_pull_none_smt>, + <2 RK_PA3 3 &pcfg_pull_none_smt>; + }; + }; + + i2c3-m0 { + i2c3m0_xfer: i2c3m0-xfer { + rockchip,pins = + <0 RK_PB7 2 &pcfg_pull_none_smt>, + <0 RK_PC0 2 &pcfg_pull_none_smt>; + }; + }; + + i2c3-m1 { + i2c3m1_xfer: i2c3m1-xfer { + rockchip,pins = + <3 RK_PB4 2 &pcfg_pull_none_smt>, + <3 RK_PB5 2 &pcfg_pull_none_smt>; + }; + }; + + i2c3-m2 { + i2c3m2_xfer: i2c3m2-xfer { + rockchip,pins = + <2 RK_PA1 3 &pcfg_pull_none_smt>, + <2 RK_PA0 3 &pcfg_pull_none_smt>; + }; + }; + + i2s_2ch_0 { + i2s_2ch_0_mclk: i2s-2ch-0-mclk { + rockchip,pins = + <4 RK_PB4 1 &pcfg_pull_none>; + }; + + i2s_2ch_0_sclk: i2s-2ch-0-sclk { + rockchip,pins = + <4 RK_PB5 1 &pcfg_pull_none>; + }; + + i2s_2ch_0_lrck: i2s-2ch-0-lrck { + rockchip,pins = + <4 RK_PB6 1 &pcfg_pull_none>; + }; + + i2s_2ch_0_sdo: i2s-2ch-0-sdo { + rockchip,pins = + <4 RK_PB7 1 &pcfg_pull_none>; + }; + + i2s_2ch_0_sdi: i2s-2ch-0-sdi { + rockchip,pins = + <4 RK_PC0 1 &pcfg_pull_none>; + }; + }; + + i2s_8ch_0 { + i2s_8ch_0_mclk: i2s-8ch-0-mclk { + rockchip,pins = + <2 RK_PA4 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sclktx: i2s-8ch-0-sclktx { + rockchip,pins = + <2 RK_PA5 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sclkrx: i2s-8ch-0-sclkrx { + rockchip,pins = + <2 RK_PA6 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_lrcktx: i2s-8ch-0-lrcktx { + rockchip,pins = + <2 RK_PA7 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_lrckrx: i2s-8ch-0-lrckrx { + rockchip,pins = + <2 RK_PB0 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdo0: i2s-8ch-0-sdo0 { + rockchip,pins = + <2 RK_PB1 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdo1: i2s-8ch-0-sdo1 { + rockchip,pins = + <2 RK_PB2 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdo2: i2s-8ch-0-sdo2 { + rockchip,pins = + <2 RK_PB3 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdo3: i2s-8ch-0-sdo3 { + rockchip,pins = + <2 RK_PB4 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdi0: i2s-8ch-0-sdi0 { + rockchip,pins = + <2 RK_PB5 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdi1: i2s-8ch-0-sdi1 { + rockchip,pins = + <2 RK_PB6 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdi2: i2s-8ch-0-sdi2 { + rockchip,pins = + <2 RK_PB7 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdi3: i2s-8ch-0-sdi3 { + rockchip,pins = + <2 RK_PC0 1 &pcfg_pull_none>; + }; + }; + + i2s_8ch_1_m0 { + i2s_8ch_1_m0_mclk: i2s-8ch-1-m0-mclk { + rockchip,pins = + <1 RK_PA2 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sclktx: i2s-8ch-1-m0-sclktx { + rockchip,pins = + <1 RK_PA3 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sclkrx: i2s-8ch-1-m0-sclkrx { + rockchip,pins = + <1 RK_PA4 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_lrcktx: i2s-8ch-1-m0-lrcktx { + rockchip,pins = + <1 RK_PA5 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_lrckrx: i2s-8ch-1-m0-lrckrx { + rockchip,pins = + <1 RK_PA6 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sdo0: i2s-8ch-1-m0-sdo0 { + rockchip,pins = + <1 RK_PA7 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sdo1_sdi3: i2s-8ch-1-m0-sdo1-sdi3 { + rockchip,pins = + <1 RK_PB0 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sdo2_sdi2: i2s-8ch-1-m0-sdo2-sdi2 { + rockchip,pins = + <1 RK_PB1 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sdo3_sdi1: i2s-8ch-1-m0-sdo3_sdi1 { + rockchip,pins = + <1 RK_PB2 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sdi0: i2s-8ch-1-m0-sdi0 { + rockchip,pins = + <1 RK_PB3 2 &pcfg_pull_none>; + }; + }; + + i2s_8ch_1_m1 { + i2s_8ch_1_m1_mclk: i2s-8ch-1-m1-mclk { + rockchip,pins = + <1 RK_PB4 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sclktx: i2s-8ch-1-m1-sclktx { + rockchip,pins = + <1 RK_PB5 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sclkrx: i2s-8ch-1-m1-sclkrx { + rockchip,pins = + <1 RK_PB6 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_lrcktx: i2s-8ch-1-m1-lrcktx { + rockchip,pins = + <1 RK_PB7 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_lrckrx: i2s-8ch-1-m1-lrckrx { + rockchip,pins = + <1 RK_PC0 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sdo0: i2s-8ch-1-m1-sdo0 { + rockchip,pins = + <1 RK_PC1 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sdo1_sdi3: i2s-8ch-1-m1-sdo1-sdi3 { + rockchip,pins = + <1 RK_PC2 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sdo2_sdi2: i2s-8ch-1-m1-sdo2-sdi2 { + rockchip,pins = + <1 RK_PC3 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sdo3_sdi1: i2s-8ch-1-m1-sdo3_sdi1 { + rockchip,pins = + <1 RK_PC4 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sdi0: i2s-8ch-1-m1-sdi0 { + rockchip,pins = + <1 RK_PC5 2 &pcfg_pull_none>; + }; + }; + + pdm_m0 { + pdm_m0_clk: pdm-m0-clk { + rockchip,pins = + <1 RK_PA4 3 &pcfg_pull_none>; + }; + + pdm_m0_sdi0: pdm-m0-sdi0 { + rockchip,pins = + <1 RK_PB3 3 &pcfg_pull_none>; + }; + + pdm_m0_sdi1: pdm-m0-sdi1 { + rockchip,pins = + <1 RK_PB2 3 &pcfg_pull_none>; + }; + + pdm_m0_sdi2: pdm-m0-sdi2 { + rockchip,pins = + <1 RK_PB1 3 &pcfg_pull_none>; + }; + + pdm_m0_sdi3: pdm-m0-sdi3 { + rockchip,pins = + <1 RK_PB0 3 &pcfg_pull_none>; + }; + }; + + pdm_m1 { + pdm_m1_clk: pdm-m1-clk { + rockchip,pins = + <1 RK_PB6 4 &pcfg_pull_none>; + }; + + pdm_m1_sdi0: pdm-m1-sdi0 { + rockchip,pins = + <1 RK_PC5 4 &pcfg_pull_none>; + }; + + pdm_m1_sdi1: pdm-m1-sdi1 { + rockchip,pins = + <1 RK_PC4 4 &pcfg_pull_none>; + }; + + pdm_m1_sdi2: pdm-m1-sdi2 { + rockchip,pins = + <1 RK_PC3 4 &pcfg_pull_none>; + }; + + pdm_m1_sdi3: pdm-m1-sdi3 { + rockchip,pins = + <1 RK_PC2 4 &pcfg_pull_none>; + }; + }; + + pdm_m2 { + pdm_m2_clkm: pdm-m2-clkm { + rockchip,pins = + <2 RK_PA4 3 &pcfg_pull_none>; + }; + + pdm_m2_clk: pdm-m2-clk { + rockchip,pins = + <2 RK_PA6 2 &pcfg_pull_none>; + }; + + pdm_m2_sdi0: pdm-m2-sdi0 { + rockchip,pins = + <2 RK_PB5 2 &pcfg_pull_none>; + }; + + pdm_m2_sdi1: pdm-m2-sdi1 { + rockchip,pins = + <2 RK_PB6 2 &pcfg_pull_none>; + }; + + pdm_m2_sdi2: pdm-m2-sdi2 { + rockchip,pins = + <2 RK_PB7 2 &pcfg_pull_none>; + }; + + pdm_m2_sdi3: pdm-m2-sdi3 { + rockchip,pins = + <2 RK_PC0 2 &pcfg_pull_none>; + }; + }; + + pwm0 { + pwm0_pin: pwm0-pin { + rockchip,pins = + <0 RK_PB5 1 &pcfg_pull_none>; + }; + + pwm0_pin_pull_down: pwm0-pin-pull-down { + rockchip,pins = + <0 RK_PB5 1 &pcfg_pull_down>; + }; + }; + + pwm1 { + pwm1_pin: pwm1-pin { + rockchip,pins = + <0 RK_PB6 1 &pcfg_pull_none>; + }; + + pwm1_pin_pull_down: pwm1-pin-pull-down { + rockchip,pins = + <0 RK_PB6 1 &pcfg_pull_down>; + }; + }; + + pwm2 { + pwm2_pin: pwm2-pin { + rockchip,pins = + <0 RK_PB7 1 &pcfg_pull_none>; + }; + + pwm2_pin_pull_down: pwm2-pin-pull-down { + rockchip,pins = + <0 RK_PB7 1 &pcfg_pull_down>; + }; + }; + + pwm3 { + pwm3_pin: pwm3-pin { + rockchip,pins = + <0 RK_PC0 1 &pcfg_pull_none>; + }; + + pwm3_pin_pull_down: pwm3-pin-pull-down { + rockchip,pins = + <0 RK_PC0 1 &pcfg_pull_down>; + }; + }; + + pwm4 { + pwm4_pin: pwm4-pin { + rockchip,pins = + <0 RK_PA1 2 &pcfg_pull_none>; + }; + + pwm4_pin_pull_down: pwm4-pin-pull-down { + rockchip,pins = + <0 RK_PA1 2 &pcfg_pull_down>; + }; + }; + + pwm5 { + pwm5_pin: pwm5-pin { + rockchip,pins = + <0 RK_PC1 2 &pcfg_pull_none>; + }; + + pwm5_pin_pull_down: pwm5-pin-pull-down { + rockchip,pins = + <0 RK_PC1 2 &pcfg_pull_down>; + }; + }; + + pwm6 { + pwm6_pin: pwm6-pin { + rockchip,pins = + <0 RK_PC2 2 &pcfg_pull_none>; + }; + + pwm6_pin_pull_down: pwm6-pin-pull-down { + rockchip,pins = + <0 RK_PC2 2 &pcfg_pull_down>; + }; + }; + + pwm7 { + pwm7_pin: pwm7-pin { + rockchip,pins = + <2 RK_PB0 2 &pcfg_pull_none>; + }; + + pwm7_pin_pull_down: pwm7-pin-pull-down { + rockchip,pins = + <2 RK_PB0 2 &pcfg_pull_down>; + }; + }; + + pwm8 { + pwm8_pin: pwm8-pin { + rockchip,pins = + <2 RK_PB2 2 &pcfg_pull_none>; + }; + + pwm8_pin_pull_down: pwm8-pin-pull-down { + rockchip,pins = + <2 RK_PB2 2 &pcfg_pull_down>; + }; + }; + + pwm9 { + pwm9_pin: pwm9-pin { + rockchip,pins = + <2 RK_PB3 2 &pcfg_pull_none>; + }; + + pwm9_pin_pull_down: pwm9-pin-pull-down { + rockchip,pins = + <2 RK_PB3 2 &pcfg_pull_down>; + }; + }; + + pwm10 { + pwm10_pin: pwm10-pin { + rockchip,pins = + <2 RK_PB4 2 &pcfg_pull_none>; + }; + + pwm10_pin_pull_down: pwm10-pin-pull-down { + rockchip,pins = + <2 RK_PB4 2 &pcfg_pull_down>; + }; + }; + + pwm11 { + pwm11_pin: pwm11-pin { + rockchip,pins = + <2 RK_PC0 4 &pcfg_pull_none>; + }; + + pwm11_pin_pull_down: pwm11-pin-pull-down { + rockchip,pins = + <2 RK_PC0 4 &pcfg_pull_down>; + }; + }; + + rtc { + rtc_32k: rtc-32k { + rockchip,pins = + <0 RK_PC3 1 &pcfg_pull_none>; + }; + }; + + sdmmc { + sdmmc_clk: sdmmc-clk { + rockchip,pins = + <4 RK_PD5 1 &pcfg_pull_none_4ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = + <4 RK_PD4 1 &pcfg_pull_up_4ma>; + }; + + sdmmc_det: sdmmc-det { + rockchip,pins = + <0 RK_PA3 1 &pcfg_pull_up_4ma>; + }; + + sdmmc_pwren: sdmmc-pwren { + rockchip,pins = + <4 RK_PD6 1 &pcfg_pull_none_4ma>; + }; + + sdmmc_bus1: sdmmc-bus1 { + rockchip,pins = + <4 RK_PD0 1 &pcfg_pull_up_4ma>; + }; + + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = + <4 RK_PD0 1 &pcfg_pull_up_4ma>, + <4 RK_PD1 1 &pcfg_pull_up_4ma>, + <4 RK_PD2 1 &pcfg_pull_up_4ma>, + <4 RK_PD3 1 &pcfg_pull_up_4ma>; + }; + }; + + sdio { + sdio_clk: sdio-clk { + rockchip,pins = + <4 RK_PA5 1 &pcfg_pull_none_8ma>; + }; + + sdio_cmd: sdio-cmd { + rockchip,pins = + <4 RK_PA4 1 &pcfg_pull_up_8ma>; + }; + + sdio_pwren: sdio-pwren { + rockchip,pins = + <0 RK_PA2 1 &pcfg_pull_none_8ma>; + }; + + sdio_wrpt: sdio-wrpt { + rockchip,pins = + <0 RK_PA1 1 &pcfg_pull_none_8ma>; + }; + + sdio_intn: sdio-intn { + rockchip,pins = + <0 RK_PA0 1 &pcfg_pull_none_8ma>; + }; + + sdio_bus1: sdio-bus1 { + rockchip,pins = + <4 RK_PA0 1 &pcfg_pull_up_8ma>; + }; + + sdio_bus4: sdio-bus4 { + rockchip,pins = + <4 RK_PA0 1 &pcfg_pull_up_8ma>, + <4 RK_PA1 1 &pcfg_pull_up_8ma>, + <4 RK_PA2 1 &pcfg_pull_up_8ma>, + <4 RK_PA3 1 &pcfg_pull_up_8ma>; + }; + }; + + spdif_in { + spdif_in: spdif-in { + rockchip,pins = + <0 RK_PC2 1 &pcfg_pull_none>; + }; + }; + + spdif_out { + spdif_out: spdif-out { + rockchip,pins = + <0 RK_PC1 1 &pcfg_pull_none>; + }; + }; + + spi0 { + spi0_clk: spi0-clk { + rockchip,pins = + <2 RK_PA2 2 &pcfg_pull_up_4ma>; + }; + + spi0_csn0: spi0-csn0 { + rockchip,pins = + <2 RK_PA3 2 &pcfg_pull_up_4ma>; + }; + + spi0_miso: spi0-miso { + rockchip,pins = + <2 RK_PA0 2 &pcfg_pull_up_4ma>; + }; + + spi0_mosi: spi0-mosi { + rockchip,pins = + <2 RK_PA1 2 &pcfg_pull_up_4ma>; + }; + }; + + spi1 { + spi1_clk: spi1-clk { + rockchip,pins = + <3 RK_PB3 3 &pcfg_pull_up_4ma>; + }; + + spi1_csn0: spi1-csn0 { + rockchip,pins = + <3 RK_PB5 3 &pcfg_pull_up_4ma>; + }; + + spi1_miso: spi1-miso { + rockchip,pins = + <3 RK_PB2 3 &pcfg_pull_up_4ma>; + }; + + spi1_mosi: spi1-mosi { + rockchip,pins = + <3 RK_PB4 3 &pcfg_pull_up_4ma>; + }; + }; + + spi1-m1 { + spi1m1_miso: spi1m1-miso { + rockchip,pins = + <2 RK_PA4 2 &pcfg_pull_up_4ma>; + }; + + spi1m1_mosi: spi1m1-mosi { + rockchip,pins = + <2 RK_PA5 2 &pcfg_pull_up_4ma>; + }; + + spi1m1_clk: spi1m1-clk { + rockchip,pins = + <2 RK_PA7 2 &pcfg_pull_up_4ma>; + }; + + spi1m1_csn0: spi1m1-csn0 { + rockchip,pins = + <2 RK_PB1 2 &pcfg_pull_up_4ma>; + }; + }; + + spi2 { + spi2_clk: spi2-clk { + rockchip,pins = + <1 RK_PD0 3 &pcfg_pull_up_4ma>; + }; + + spi2_csn0: spi2-csn0 { + rockchip,pins = + <1 RK_PD1 3 &pcfg_pull_up_4ma>; + }; + + spi2_miso: spi2-miso { + rockchip,pins = + <1 RK_PC6 3 &pcfg_pull_up_4ma>; + }; + + spi2_mosi: spi2-mosi { + rockchip,pins = + <1 RK_PC7 3 &pcfg_pull_up_4ma>; + }; + }; + + tsadc { + tsadc_otp_gpio: tsadc-otp-gpio { + rockchip,pins = + <0 RK_PB2 0 &pcfg_pull_none>; + }; + + tsadc_otp_out: tsadc-otp-out { + rockchip,pins = + <0 RK_PB2 1 &pcfg_pull_none>; + }; + }; + + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = + <2 RK_PA1 1 &pcfg_pull_up>, + <2 RK_PA0 1 &pcfg_pull_up>; + }; + + uart0_cts: uart0-cts { + rockchip,pins = + <2 RK_PA2 1 &pcfg_pull_none>; + }; + + uart0_rts: uart0-rts { + rockchip,pins = + <2 RK_PA3 1 &pcfg_pull_none>; + }; + + uart0_rts_gpio: uart0-rts-gpio { + rockchip,pins = + <2 RK_PA3 0 &pcfg_pull_none>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = + <1 RK_PD1 1 &pcfg_pull_up>, + <1 RK_PD0 1 &pcfg_pull_up>; + }; + + uart1_cts: uart1-cts { + rockchip,pins = + <1 RK_PC6 1 &pcfg_pull_none>; + }; + + uart1_rts: uart1-rts { + rockchip,pins = + <1 RK_PC7 1 &pcfg_pull_none>; + }; + }; + + uart2-m0 { + uart2m0_xfer: uart2m0-xfer { + rockchip,pins = + <1 RK_PC7 2 &pcfg_pull_up>, + <1 RK_PC6 2 &pcfg_pull_up>; + }; + }; + + uart2-m1 { + uart2m1_xfer: uart2m1-xfer { + rockchip,pins = + <4 RK_PD3 2 &pcfg_pull_up>, + <4 RK_PD2 2 &pcfg_pull_up>; + }; + }; + + uart3 { + uart3_xfer: uart3-xfer { + rockchip,pins = + <3 RK_PB5 4 &pcfg_pull_up>, + <3 RK_PB4 4 &pcfg_pull_up>; + }; + }; + + uart3-m1 { + uart3m1_xfer: uart3m1-xfer { + rockchip,pins = + <0 RK_PC2 3 &pcfg_pull_up>, + <0 RK_PC1 3 &pcfg_pull_up>; + }; + }; + + uart4 { + uart4_xfer: uart4-xfer { + rockchip,pins = + <4 RK_PB1 1 &pcfg_pull_up>, + <4 RK_PB0 1 &pcfg_pull_up>; + }; + + uart4_cts: uart4-cts { + rockchip,pins = + <4 RK_PA6 1 &pcfg_pull_none>; + }; + + uart4_rts: uart4-rts { + rockchip,pins = + <4 RK_PA7 1 &pcfg_pull_none>; + }; + + uart4_rts_gpio: uart4-rts-gpio { + rockchip,pins = + <4 RK_PA7 0 &pcfg_pull_none>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts new file mode 100644 index 000000000000..76b49f573101 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts @@ -0,0 +1,359 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) +// Copyright (c) 2017-2019 Arm Ltd. + +/dts-v1/; +#include "rk3328.dtsi" + +/ { + model = "Beelink A1"; + compatible = "azw,beelink-a1", "rockchip,rk3328"; + + /* + * UART pins, as viewed with bottom of case removed: + * + * Front + * /------- + * L / o <- Gnd + * e / o <-- Rx + * f / o <--- Tx + * t / o <---- +3.3v + * | + */ + chosen { + stdout-path = "serial2:1500000n8"; + }; + + gmac_clkin: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac_clkin"; + #clock-cells = <0>; + }; + + vcc_host_5v: usb3-current-switch { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb30_host_drv>; + regulator-name = "vcc_host_5v"; + vin-supply = <&vcc_sys>; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>; + }; +}; + +&analog_sound { + simple-audio-card,name = "Analog A/V"; + status = "okay"; +}; + +&codec { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + no-sd; + no-sdio; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc18_emmc>; + status = "okay"; +}; + +&gmac2io { + assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; + assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>; + clock_in_out = "input"; + phy-handle = <&rtl8211f>; + phy-mode = "rgmii"; + phy-supply = <&vcc_io>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmiim1_pins>; + snps,aal; + snps,pbl = <0x4>; + tx_delay = <0x26>; + rx_delay = <0x11>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + rtl8211f: phy@0 { + reg = <0>; + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpu { + mali-supply = <&vdd_logic>; +}; + +&hdmi { + status = "okay"; +}; + +&hdmiphy { + status = "okay"; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c1 { + clock-frequency = <1000000>; + i2c-scl-falling-time-ns = <5>; + i2c-scl-rising-time-ns = <83>; + status = "okay"; + + pmic@18 { + compatible = "rockchip,rk805"; + reg = <0x18>; + interrupt-parent = <&gpio2>; + interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_io>; + vcc6-supply = <&vcc_io>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_18: LDO_REG1 { + regulator-name = "vdd_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc18_emmc: LDO_REG2 { + regulator-name = "vcc_18emmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_11: LDO_REG3 { + regulator-name = "vdd_11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1100000>; + }; + }; + }; + }; +}; + +&i2s0 { + status = "okay"; +}; + +&i2s1 { + status = "okay"; +}; + +&io_domains { + vccio1-supply = <&vcc_io>; + vccio2-supply = <&vcc18_emmc>; + vccio3-supply = <&vcc_io>; + vccio4-supply = <&vdd_18>; + vccio5-supply = <&vcc_io>; + vccio6-supply = <&vdd_18>; + pmuio-supply = <&vcc_io>; + status = "okay"; +}; + +&pinctrl { + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb3 { + usb30_host_drv: usb30-host-drv { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + bt_dis: bt-dis { + rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_output_low>; + }; + + bt_wake_host: bt-wake-host { + rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + chip_en: chip-en { + rockchip,pins = <2 RK_PC3 RK_FUNC_GPIO &pcfg_output_low>; + }; + + host_wake_bt: host-wake-bt { + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_output_high>; + }; + + wl_dis: wl-dis { + rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_output_low>; + }; + + wl_wake_host: wl-wake-host { + rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc_io>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <0>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&u2phy { + status = "okay"; +}; + +&u2phy_host { + status = "okay"; +}; + +&u2phy_otg { + status = "okay"; +}; + +&usb20_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usb_host0_ehci { + pinctrl-names = "default"; + pinctrl-0 = <&bt_dis &bt_wake_host &chip_en &host_wake_bt &wl_dis &wl_wake_host>; + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts index bb40c163b05d..8d553c92182a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts @@ -35,6 +35,7 @@ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc0m1_gpio>; + regulator-boot-on; regulator-name = "vcc_sd"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 31cc1541f1f5..91306ebed4da 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -142,6 +142,22 @@ }; }; + analog_sound: analog-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,name = "Analog"; + status = "disabled"; + + simple-audio-card,cpu { + sound-dai = <&i2s1>; + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + }; + }; + arm-pmu { compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, @@ -156,6 +172,22 @@ ports = <&vop_out>; }; + hdmi_sound: hdmi-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <128>; + simple-audio-card,name = "HDMI"; + status = "disabled"; + + simple-audio-card,cpu { + sound-dai = <&i2s0>; + }; + + simple-audio-card,codec { + sound-dai = <&hdmi>; + }; + }; + psci { compatible = "arm,psci-1.0", "arm,psci-0.2"; method = "smc"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts index a9f4d6d7d2b7..9dd3b171e91d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts @@ -68,6 +68,16 @@ &spi0 { status = "okay"; + + cr50@0 { + compatible = "google,cr50"; + reg = <0>; + interrupt-parent = <&gpio0>; + interrupts = <5 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&h1_int_od_l>; + spi-max-frequency = <800000>; + }; }; &pinctrl { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi index 50dfab51f175..4373ed732af7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi @@ -436,6 +436,16 @@ camera: &i2c7 { &spi2 { status = "okay"; + + cr50@0 { + compatible = "google,cr50"; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <17 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&h1_int_od_l>; + spi-max-frequency = <800000>; + }; }; &usb_host0_ohci { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi index dd16c80d923e..b788ae4f47f0 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi @@ -152,9 +152,6 @@ phy-handle = <&rtl8211e>; phy-mode = "rgmii"; phy-supply = <&vcc3v3_s3>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 30000>; - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; tx_delay = <0x28>; rx_delay = <0x11>; status = "okay"; @@ -168,6 +165,9 @@ reg = <1>; interrupt-parent = <&gpio3>; interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; }; }; }; @@ -184,6 +184,10 @@ status = "okay"; }; +&hdmi_sound { + status = "okay"; +}; + &i2c0 { clock-frequency = <400000>; i2c-scl-rising-time-ns = <160>; @@ -459,6 +463,10 @@ status = "okay"; }; +&i2s2 { + status = "okay"; +}; + &io_domains { bt656-supply = <&vcc_1v8>; audio-supply = <&vcca1v8_codec>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 62ea288a1a70..c1edca3872c7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -165,6 +165,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &i2c0 { status = "okay"; i2c-scl-rising-time-ns = <168>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts new file mode 100644 index 000000000000..d6b3042cffa9 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd + * Copyright (c) 2019 Markus Reichl <m.reichl@fivetechno.de> + */ + +/dts-v1/; +#include "rk3399-roc-pc.dtsi" + +/ { + model = "Firefly ROC-RK3399-PC Mezzanine Board"; + compatible = "firefly,roc-rk3399-pc-mezzanine", "rockchip,rk3399"; + + vcc3v3_ngff: vcc3v3-ngff { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_ngff"; + enable-active-high; + gpio = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc3v3_ngff_en>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; + + vcc3v3_pcie: vcc3v3-pcie { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie"; + enable-active-high; + gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc3v3_pcie_en>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; +}; + +&pcie_phy { + status = "okay"; +}; + +&pcie0 { + ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; + num-lanes = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_perst>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pinctrl { + ngff { + vcc3v3_ngff_en: vcc3v3-ngff-en { + rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + vcc3v3_pcie_en: vcc3v3-pcie-en { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie_perst: pcie-perst { + rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts index 19f7732d728c..cd4195425309 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts @@ -4,677 +4,9 @@ */ /dts-v1/; -#include <dt-bindings/pwm/pwm.h> -#include "rk3399.dtsi" -#include "rk3399-opp.dtsi" +#include "rk3399-roc-pc.dtsi" / { model = "Firefly ROC-RK3399-PC Board"; compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399"; - - chosen { - stdout-path = "serial2:1500000n8"; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm0 0 25000 0>; - }; - - clkin_gmac: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "clkin_gmac"; - #clock-cells = <0>; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&rk808 1>; - clock-names = "ext_clock"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h>; - - /* - * On the module itself this is one of these (depending - * on the actual card populated): - * - SDIO_RESET_L_WL_REG_ON - * - PDN (power down when low) - */ - reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; - }; - - vcc_vbus_typec0: vcc-vbus-typec0 { - compatible = "regulator-fixed"; - regulator-name = "vcc_vbus_typec0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - /* - * should be placed inside mp8859, but not until mp8859 has - * its own dt-binding. - */ - vcc12v_sys: mp8859-dcdc1 { - compatible = "regulator-fixed"; - regulator-name = "vcc12v_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - vin-supply = <&vcc_vbus_typec0>; - }; - - /* switched by pmic_sleep */ - vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { - compatible = "regulator-fixed"; - regulator-name = "vcc1v8_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_1v8>; - }; - - vcc3v3_sys: vcc3v3-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc12v_sys>; - }; - - /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ - vcc5v0_host: vcc5v0-host-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_host_en &hub_rst>; - regulator-name = "vcc5v0_host"; - regulator-always-on; - vin-supply = <&vcc_sys>; - }; - - vcc_vbus_typec1: vcc-vbus-typec1 { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc_vbus_typec1_en>; - regulator-name = "vcc_vbus_typec1"; - regulator-always-on; - vin-supply = <&vcc_sys>; - }; - - vcc_sys: vcc-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_sys>; - }; - - vdd_log: vdd-log { - compatible = "pwm-regulator"; - pwms = <&pwm2 0 25000 1>; - regulator-name = "vdd_log"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - vin-supply = <&vcc3v3_sys>; - }; -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l2 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l3 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_b0 { - cpu-supply = <&vdd_cpu_b>; -}; - -&cpu_b1 { - cpu-supply = <&vdd_cpu_b>; -}; - -&emmc_phy { - status = "okay"; -}; - -&gmac { - assigned-clocks = <&cru SCLK_RMII_SRC>; - assigned-clock-parents = <&clkin_gmac>; - clock_in_out = "input"; - phy-supply = <&vcc_lan>; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; - tx_delay = <0x28>; - rx_delay = <0x11>; - status = "okay"; -}; - -&hdmi { - ddc-i2c-bus = <&i2c3>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_cec>; - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - i2c-scl-rising-time-ns = <168>; - i2c-scl-falling-time-ns = <4>; - status = "okay"; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - interrupt-parent = <&gpio1>; - interrupts = <21 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc3v3_sys>; - vcc2-supply = <&vcc3v3_sys>; - vcc3-supply = <&vcc3v3_sys>; - vcc4-supply = <&vcc3v3_sys>; - vcc6-supply = <&vcc3v3_sys>; - vcc7-supply = <&vcc3v3_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc3v3_sys>; - vcc10-supply = <&vcc3v3_sys>; - vcc11-supply = <&vcc3v3_sys>; - vcc12-supply = <&vcc3v3_sys>; - vddio-supply = <&vcc1v8_pmu>; - - regulators { - vdd_center: DCDC_REG1 { - regulator-name = "vdd_center"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_l: DCDC_REG2 { - regulator-name = "vdd_cpu_l"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG4 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcca1v8_codec: LDO_REG1 { - regulator-name = "vcca1v8_codec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc1v8_hdmi: LDO_REG2 { - regulator-name = "vcc1v8_hdmi"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc1v8_pmu: LDO_REG3 { - regulator-name = "vcc1v8_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc_sdio: LDO_REG4 { - regulator-name = "vcc_sdio"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcca3v0_codec: LDO_REG5 { - regulator-name = "vcca3v0_codec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v5: LDO_REG6 { - regulator-name = "vcc_1v5"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1500000>; - }; - }; - - vcca0v9_hdmi: LDO_REG7 { - regulator-name = "vcca0v9_hdmi"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v0: LDO_REG8 { - regulator-name = "vcc_3v0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcc3v3_s3: vcc_lan: SWITCH_REG1 { - regulator-name = "vcc3v3_s3"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_s0: SWITCH_REG2 { - regulator-name = "vcc3v3_s0"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; - - vdd_cpu_b: regulator@40 { - compatible = "silergy,syr827"; - reg = <0x40>; - fcs,suspend-voltage-selector = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&vsel1_gpio>; - regulator-name = "vdd_cpu_b"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc3v3_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: regulator@41 { - compatible = "silergy,syr828"; - reg = <0x41>; - fcs,suspend-voltage-selector = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&vsel2_gpio>; - regulator-name = "vdd_gpu"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc3v3_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; -}; - -&i2c1 { - i2c-scl-rising-time-ns = <300>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; -}; - -&i2c3 { - i2c-scl-rising-time-ns = <450>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; -}; - -&i2c4 { - i2c-scl-rising-time-ns = <600>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - - fusb1: usb-typec@22 { - compatible = "fcs,fusb302"; - reg = <0x22>; - interrupt-parent = <&gpio1>; - interrupts = <1 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&fusb1_int>; - vbus-supply = <&vcc_vbus_typec1>; - status = "okay"; - }; -}; - -&i2c7 { - i2c-scl-rising-time-ns = <600>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - - fusb0: usb-typec@22 { - compatible = "fcs,fusb302"; - reg = <0x22>; - interrupt-parent = <&gpio1>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&fusb0_int>; - vbus-supply = <&vcc_vbus_typec0>; - status = "okay"; - }; -}; - -&i2s0 { - rockchip,playback-channels = <8>; - rockchip,capture-channels = <8>; - status = "okay"; -}; - -&i2s1 { - rockchip,playback-channels = <2>; - rockchip,capture-channels = <2>; - status = "okay"; -}; - -&i2s2 { - status = "okay"; -}; - -&io_domains { - audio-supply = <&vcca1v8_codec>; - bt656-supply = <&vcc_3v0>; - gpio1830-supply = <&vcc_3v0>; - sdmmc-supply = <&vcc_sdio>; - status = "okay"; -}; - -&pmu_io_domains { - pmu1830-supply = <&vcc_3v0>; - status = "okay"; -}; - -&pinctrl { - lcd-panel { - lcd_panel_reset: lcd-panel-reset { - rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - pmic { - vsel1_gpio: vsel1-gpio { - rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - vsel2_gpio: vsel2-gpio { - rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - sdio-pwrseq { - wifi_enable_h: wifi-enable-h { - rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - usb2 { - vcc5v0_host_en: vcc5v0-host-en { - rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - hub_rst: hub-rst { - rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>; - }; - }; - - usb-typec { - vcc_vbus_typec1_en: vcc-vbus-typec1-en { - rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - fusb30x { - fusb0_int: fusb0-int { - rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - fusb1_int: fusb1-int { - rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; -}; - -&pwm0 { - status = "okay"; -}; - -&pwm2 { - status = "okay"; -}; - -&saradc { - vref-supply = <&vcca1v8_s3>; - status = "okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; - disable-wp; - max-frequency = <150000000>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - non-removable; - status = "okay"; -}; - -&tcphy0 { - status = "okay"; -}; - -&tcphy1 { - status = "okay"; -}; - -&tsadc { - /* tshut mode 0:CRU 1:GPIO */ - rockchip,hw-tshut-mode = <1>; - /* tshut polarity 0:LOW 1:HIGH */ - rockchip,hw-tshut-polarity = <1>; - status = "okay"; -}; - -&u2phy0 { - status = "okay"; - - u2phy0_otg: otg-port { - phy-supply = <&vcc_vbus_typec0>; - status = "okay"; - }; - - u2phy0_host: host-port { - phy-supply = <&vcc5v0_host>; - status = "okay"; - }; -}; - -&u2phy1 { - status = "okay"; - - u2phy1_otg: otg-port { - phy-supply = <&vcc_vbus_typec1>; - status = "okay"; - }; - - u2phy1_host: host-port { - phy-supply = <&vcc5v0_host>; - status = "okay"; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts>; - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usbdrd3_0 { - status = "okay"; -}; - -&usbdrd_dwc3_0 { - status = "okay"; -}; - -&usbdrd3_1 { - status = "okay"; -}; - -&usbdrd_dwc3_1 { - status = "okay"; - dr_mode = "host"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi new file mode 100644 index 000000000000..7e07dae33d0f --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi @@ -0,0 +1,767 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd + */ + +/dts-v1/; +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pwm/pwm.h> +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + model = "Firefly ROC-RK3399-PC Board"; + compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 25000 0>; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1500000>; + poll-interval = <100>; + + recovery { + label = "Recovery"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <18000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key_l>; + + power { + debounce-interval = <100>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + label = "GPIO Key Power"; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>, <&yellow_led_gpio>; + + work-led { + label = "green:work"; + gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + diy-led { + label = "red:diy"; + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "mmc1"; + }; + + yellow-led { + label = "yellow:yellow-led"; + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "mmc0"; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + + vcc_vbus_typec0: vcc-vbus-typec0 { + compatible = "regulator-fixed"; + regulator-name = "vcc_vbus_typec0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + /* + * should be placed inside mp8859, but not until mp8859 has + * its own dt-binding. + */ + dc_12v: mp8859-dcdc1 { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <&vcc_vbus_typec0>; + }; + + /* switched by pmic_sleep */ + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; + + /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en &hub_rst>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vcc_vbus_typec1: vcc-vbus-typec1 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc_vbus_typec1_en>; + regulator-name = "vcc_vbus_typec1"; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc_sys_en>; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + vin-supply = <&vcc3v3_sys>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + vcc10-supply = <&vcc3v3_sys>; + vcc11-supply = <&vcc3v3_sys>; + vcc12-supply = <&vcc3v3_sys>; + vcc13-supply = <&vcc3v3_sys>; + vcc14-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_3v0>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_codec: LDO_REG1 { + regulator-name = "vcca1v8_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_hdmi: LDO_REG2 { + regulator-name = "vcc1v8_hdmi"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_pmu: LDO_REG3 { + regulator-name = "vcc1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sdio: LDO_REG4 { + regulator-name = "vcc_sdio"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca0v9_hdmi: LDO_REG7 { + regulator-name = "vcca0v9_hdmi"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: vcc_lan: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel1_gpio>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel2_gpio>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c1 { + i2c-scl-rising-time-ns = <300>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c4 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + + fusb1: usb-typec@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fusb1_int>; + vbus-supply = <&vcc_vbus_typec1>; + status = "okay"; + }; +}; + +&i2c7 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + + fusb0: usb-typec@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fusb0_int>; + vbus-supply = <&vcc_vbus_typec0>; + status = "okay"; + }; +}; + +&i2s0 { + rockchip,playback-channels = <8>; + rockchip,capture-channels = <8>; + status = "okay"; +}; + +&i2s1 { + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; + status = "okay"; +}; + +&i2s2 { + status = "okay"; +}; + +&io_domains { + audio-supply = <&vcca1v8_codec>; + bt656-supply = <&vcc_3v0>; + gpio1830-supply = <&vcc_3v0>; + sdmmc-supply = <&vcc_sdio>; + status = "okay"; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc_3v0>; + status = "okay"; +}; + +&pinctrl { + buttons { + pwr_key_l: pwr-key-l { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + lcd-panel { + lcd_panel_reset: lcd-panel-reset { + rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + diy_led_gpio: diy_led-gpio { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + work_led_gpio: work_led-gpio { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + yellow_led_gpio: yellow_led-gpio { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + vsel1_gpio: vsel1-gpio { + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb2 { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc_sys_en: vcc-sys-en { + rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + hub_rst: hub-rst { + rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + usb-typec { + vcc_vbus_typec1_en: vcc-vbus-typec1-en { + rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + fusb30x { + fusb0_int: fusb0-int { + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + fusb1_int: fusb1-int { + rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca1v8_s3>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + phy-supply = <&vcc_vbus_typec0>; + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + phy-supply = <&vcc_vbus_typec1>; + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts index 1ae1ebd4efdd..188d9dfc297b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts @@ -486,21 +486,18 @@ sdio0 { sdio0_bus4: sdio0-bus4 { - rockchip,pins = - <2 20 RK_FUNC_1 &pcfg_pull_up_20ma>, - <2 21 RK_FUNC_1 &pcfg_pull_up_20ma>, - <2 22 RK_FUNC_1 &pcfg_pull_up_20ma>, - <2 23 RK_FUNC_1 &pcfg_pull_up_20ma>; + rockchip,pins = <2 RK_PC4 1 &pcfg_pull_up_20ma>, + <2 RK_PC5 1 &pcfg_pull_up_20ma>, + <2 RK_PC6 1 &pcfg_pull_up_20ma>, + <2 RK_PC7 1 &pcfg_pull_up_20ma>; }; sdio0_cmd: sdio0-cmd { - rockchip,pins = - <2 24 RK_FUNC_1 &pcfg_pull_up_20ma>; + rockchip,pins = <2 RK_PD0 1 &pcfg_pull_up_20ma>; }; sdio0_clk: sdio0-clk { - rockchip,pins = - <2 25 RK_FUNC_1 &pcfg_pull_none_20ma>; + rockchip,pins = <2 RK_PD1 1 &pcfg_pull_none_20ma>; }; }; @@ -532,8 +529,7 @@ wifi { wifi_enable_h: wifi-enable-h { - rockchip,pins = - <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; }; wifi_host_wake_l: wifi-host-wake-l { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts index e544deb61d28..7f4b2eba31d4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts @@ -81,6 +81,12 @@ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; }; + sound { + compatible = "audio-graph-card"; + label = "rockchip,rk3399"; + dais = <&i2s1_p0>; + }; + vcc12v_dcin: vcc12v-dcin { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; @@ -470,6 +476,20 @@ i2c-scl-rising-time-ns = <300>; i2c-scl-falling-time-ns = <15>; status = "okay"; + + es8316: codec@11 { + compatible = "everest,es8316"; + reg = <0x11>; + clocks = <&cru SCLK_I2S_8CH_OUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + + port { + es8316_p0_0: endpoint { + remote-endpoint = <&i2s1_p0_0>; + }; + }; + }; }; &i2c3 { @@ -505,6 +525,14 @@ rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; status = "okay"; + + i2s1_p0: port { + i2s1_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&es8316_p0_0>; + }; + }; }; &i2s2 { diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index cede1ad81be2..e62ea0e2b657 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -520,6 +520,7 @@ its: interrupt-controller@fee20000 { compatible = "arm,gic-v3-its"; msi-controller; + #msi-cells = <1>; reg = <0x0 0xfee20000 0x0 0x20000>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index 799c75fa7981..efb24579922c 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -419,6 +419,114 @@ reg = <0x00 0x30e00000 0x00 0x1000>; #hwlock-cells = <1>; }; + + mailbox0_cluster0: mailbox@31f80000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f80000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster1: mailbox@31f81000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f81000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster2: mailbox@31f82000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f82000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster3: mailbox@31f83000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f83000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster4: mailbox@31f84000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f84000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster5: mailbox@31f85000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f85000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster6: mailbox@31f86000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f86000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster7: mailbox@31f87000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f87000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster8: mailbox@31f88000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f88000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster9: mailbox@31f89000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f89000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster10: mailbox@31f8a000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f8a000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster11: mailbox@31f8b000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f8b000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; }; main_gpio0: main_gpio0@600000 { diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index 1102b84f853d..8a85b482ad31 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -221,6 +221,7 @@ bus-width = <8>; non-removable; ti,driver-strength-ohm = <50>; + disable-wp; }; &dwc3_1 { @@ -280,3 +281,61 @@ &pcie1_ep { status = "disabled"; }; + +&mailbox0_cluster0 { + interrupts = <164 0>; + + mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { + ti,mbox-tx = <1 0 0>; + ti,mbox-rx = <0 0 0>; + }; +}; + +&mailbox0_cluster1 { + interrupts = <165 0>; + + mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { + ti,mbox-tx = <1 0 0>; + ti,mbox-rx = <0 0 0>; + }; +}; + +&mailbox0_cluster2 { + status = "disabled"; +}; + +&mailbox0_cluster3 { + status = "disabled"; +}; + +&mailbox0_cluster4 { + status = "disabled"; +}; + +&mailbox0_cluster5 { + status = "disabled"; +}; + +&mailbox0_cluster6 { + status = "disabled"; +}; + +&mailbox0_cluster7 { + status = "disabled"; +}; + +&mailbox0_cluster8 { + status = "disabled"; +}; + +&mailbox0_cluster9 { + status = "disabled"; +}; + +&mailbox0_cluster10 { + status = "disabled"; +}; + +&mailbox0_cluster11 { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts index d2894d55fbbe..2a3cd6174504 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts @@ -41,6 +41,32 @@ J721E_IOPAD(0x0, PIN_INPUT, 7) /* (AC18) EXTINTn.GPIO0_0 */ >; }; + + main_mmc1_pins_default: main_mmc1_pins_default { + pinctrl-single,pins = < + J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */ + J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */ + J721E_IOPAD(0x2ac, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */ + J721E_IOPAD(0x24c, PIN_INPUT, 0) /* (R24) MMC1_DAT0 */ + J721E_IOPAD(0x248, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */ + J721E_IOPAD(0x244, PIN_INPUT, 0) /* (R25) MMC1_DAT2 */ + J721E_IOPAD(0x240, PIN_INPUT, 0) /* (R26) MMC1_DAT3 */ + J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */ + J721E_IOPAD(0x25c, PIN_INPUT, 0) /* (R28) MMC1_SDWP */ + >; + }; + + main_usbss0_pins_default: main_usbss0_pins_default { + pinctrl-single,pins = < + J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */ + >; + }; + + main_usbss1_pins_default: main_usbss1_pins_default { + pinctrl-single,pins = < + J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */ + >; + }; }; &wkup_pmx0 { @@ -117,3 +143,139 @@ &wkup_gpio1 { status = "disabled"; }; + +&mailbox0_cluster0 { + interrupts = <214 0>; + + mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster1 { + interrupts = <215 0>; + + mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster2 { + interrupts = <216 0>; + + mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster3 { + interrupts = <217 0>; + + mbox_c66_0: mbox-c66-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_c66_1: mbox-c66-1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster4 { + interrupts = <218 0>; + + mbox_c71_0: mbox-c71-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; +}; + +&mailbox0_cluster5 { + status = "disabled"; +}; + +&mailbox0_cluster6 { + status = "disabled"; +}; + +&mailbox0_cluster7 { + status = "disabled"; +}; + +&mailbox0_cluster8 { + status = "disabled"; +}; + +&mailbox0_cluster9 { + status = "disabled"; +}; + +&mailbox0_cluster10 { + status = "disabled"; +}; + +&mailbox0_cluster11 { + status = "disabled"; +}; + +&main_sdhci0 { + /* eMMC */ + non-removable; + ti,driver-strength-ohm = <50>; + disable-wp; +}; + +&main_sdhci1 { + /* SD/MMC */ + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins_default>; + ti,driver-strength-ohm = <50>; + disable-wp; +}; + +&main_sdhci2 { + /* Unused */ + status = "disabled"; +}; + +&usbss0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_usbss0_pins_default>; + ti,usb2-only; + ti,vbus-divider; +}; + +&usb0 { + dr_mode = "otg"; + maximum-speed = "high-speed"; +}; + +&usbss1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_usbss1_pins_default>; + ti,usb2-only; +}; + +&usb1 { + dr_mode = "host"; + maximum-speed = "high-speed"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index 698ef9a1d5b7..1e4c2b78d66d 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -95,6 +95,114 @@ reg = <0x00 0x30e00000 0x00 0x1000>; #hwlock-cells = <1>; }; + + mailbox0_cluster0: mailbox@31f80000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f80000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster1: mailbox@31f81000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f81000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster2: mailbox@31f82000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f82000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster3: mailbox@31f83000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f83000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster4: mailbox@31f84000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f84000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster5: mailbox@31f85000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f85000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster6: mailbox@31f86000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f86000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster7: mailbox@31f87000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f87000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster8: mailbox@31f88000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f88000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster9: mailbox@31f89000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f89000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster10: mailbox@31f8a000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f8a000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster11: mailbox@31f8b000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f8b000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; }; secure_proxy_main: mailbox@32c00000 { @@ -378,4 +486,114 @@ clocks = <&k3_clks 112 0>; clock-names = "gpio"; }; + + main_sdhci0: sdhci@4f80000 { + compatible = "ti,j721e-sdhci-8bit"; + reg = <0x0 0x4f80000 0x0 0x1000>, <0x0 0x4f88000 0x0 0x400>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&k3_clks 91 1>, <&k3_clks 91 0>; + assigned-clocks = <&k3_clks 91 1>; + assigned-clock-parents = <&k3_clks 91 2>; + bus-width = <8>; + mmc-hs400-1_8v; + mmc-ddr-1_8v; + ti,otap-del-sel = <0x2>; + ti,trm-icp = <0x8>; + ti,strobe-sel = <0x77>; + dma-coherent; + }; + + main_sdhci1: sdhci@4fb0000 { + compatible = "ti,j721e-sdhci-4bit"; + reg = <0x0 0x04fb0000 0x0 0x1000>, <0x0 0x4fb8000 0x0 0x400>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&k3_clks 92 0>, <&k3_clks 92 5>; + assigned-clocks = <&k3_clks 92 0>; + assigned-clock-parents = <&k3_clks 92 1>; + ti,otap-del-sel = <0x2>; + ti,trm-icp = <0x8>; + ti,clkbuf-sel = <0x7>; + dma-coherent; + no-1-8-v; + }; + + main_sdhci2: sdhci@4f98000 { + compatible = "ti,j721e-sdhci-4bit"; + reg = <0x0 0x4f98000 0x0 0x1000>, <0x0 0x4f90000 0x0 0x400>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 93 TI_SCI_PD_EXCLUSIVE>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&k3_clks 93 0>, <&k3_clks 93 5>; + assigned-clocks = <&k3_clks 93 0>; + assigned-clock-parents = <&k3_clks 93 1>; + ti,otap-del-sel = <0x2>; + ti,trm-icp = <0x8>; + ti,clkbuf-sel = <0x7>; + dma-coherent; + no-1-8-v; + }; + + usbss0: cdns_usb@4104000 { + compatible = "ti,j721e-usb"; + reg = <0x00 0x4104000 0x00 0x100>; + dma-coherent; + power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 288 15>, <&k3_clks 288 3>; + clock-names = "ref", "lpm"; + assigned-clocks = <&k3_clks 288 15>; /* USB2_REFCLK */ + assigned-clock-parents = <&k3_clks 288 16>; /* HFOSC0 */ + #address-cells = <2>; + #size-cells = <2>; + ranges; + + usb0: usb@6000000 { + compatible = "cdns,usb3"; + reg = <0x00 0x6000000 0x00 0x10000>, + <0x00 0x6010000 0x00 0x10000>, + <0x00 0x6020000 0x00 0x10000>; + reg-names = "otg", "xhci", "dev"; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */ + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; /* otgirq.0 */ + interrupt-names = "host", + "peripheral", + "otg"; + maximum-speed = "super-speed"; + dr_mode = "otg"; + }; + }; + + usbss1: cdns_usb@4114000 { + compatible = "ti,j721e-usb"; + reg = <0x00 0x4114000 0x00 0x100>; + dma-coherent; + power-domains = <&k3_pds 289 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 289 15>, <&k3_clks 289 3>; + clock-names = "ref", "lpm"; + assigned-clocks = <&k3_clks 289 15>; /* USB2_REFCLK */ + assigned-clock-parents = <&k3_clks 289 16>; /* HFOSC0 */ + #address-cells = <2>; + #size-cells = <2>; + ranges; + + usb1: usb@6400000 { + compatible = "cdns,usb3"; + reg = <0x00 0x6400000 0x00 0x10000>, + <0x00 0x6410000 0x00 0x10000>, + <0x00 0x6420000 0x00 0x10000>; + reg-names = "otg", "xhci", "dev"; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */ + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; /* otgirq.0 */ + interrupt-names = "host", + "peripheral", + "otg"; + maximum-speed = "super-speed"; + dr_mode = "otg"; + }; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi index 43ea1ba97922..ee5470edb435 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi @@ -127,6 +127,8 @@ <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */ <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */ <0x00 0x00A40000 0x00 0x00A40000 0x00 0x00000800>, /* timesync router */ + <0x00 0x06000000 0x00 0x06000000 0x00 0x00400000>, /* USBSS0 */ + <0x00 0x06400000 0x00 0x06400000 0x00 0x00400000>, /* USBSS1 */ <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */ <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */ <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/ diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 9aa67340a4d8..3c731e73903a 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -115,6 +115,27 @@ method = "smc"; }; + firmware { + zynqmp_firmware: zynqmp-firmware { + compatible = "xlnx,zynqmp-firmware"; + method = "smc"; + + nvmem_firmware { + compatible = "xlnx,zynqmp-nvmem-fw"; + #address-cells = <1>; + #size-cells = <1>; + + soc_revision: soc_revision@0 { + reg = <0x0 0x4>; + }; + }; + + zynqmp_pcap: pcap { + compatible = "xlnx,zynqmp-pcap-fpga"; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupt-parent = <&gic>; @@ -124,6 +145,14 @@ <1 10 0xf08>; }; + fpga_full: fpga-full { + compatible = "fpga-region"; + fpga-mgr = <&zynqmp_pcap>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + }; + amba_apu: amba-apu@0 { compatible = "simple-bus"; #address-cells = <2>; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index c9a867ac32d4..6a83ba2aea3e 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -7,8 +7,6 @@ CONFIG_PREEMPT=y CONFIG_IRQ_TIME_ACCOUNTING=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_TASKSTATS=y -CONFIG_TASK_DELAY_ACCT=y CONFIG_TASK_XACCT=y CONFIG_TASK_IO_ACCOUNTING=y CONFIG_IKCONFIG=y @@ -29,6 +27,7 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_ALL=y # CONFIG_COMPAT_BRK is not set CONFIG_PROFILING=y +CONFIG_ARCH_ACTIONS=y CONFIG_ARCH_AGILEX=y CONFIG_ARCH_SUNXI=y CONFIG_ARCH_ALPINE=y @@ -48,6 +47,7 @@ CONFIG_ARCH_MXC=y CONFIG_ARCH_QCOM=y CONFIG_ARCH_RENESAS=y CONFIG_ARCH_ROCKCHIP=y +CONFIG_ARCH_S32=y CONFIG_ARCH_SEATTLE=y CONFIG_ARCH_STRATIX10=y CONFIG_ARCH_SYNQUACER=y @@ -71,6 +71,7 @@ CONFIG_COMPAT=y CONFIG_RANDOMIZE_BASE=y CONFIG_HIBERNATION=y CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y +CONFIG_ENERGY_MODEL=y CONFIG_ARM_CPUIDLE=y CONFIG_ARM_PSCI_CPUIDLE=y CONFIG_CPU_FREQ=y @@ -90,7 +91,7 @@ CONFIG_ARM_TEGRA186_CPUFREQ=y CONFIG_ARM_SCPI_PROTOCOL=y CONFIG_RASPBERRYPI_FIRMWARE=y CONFIG_INTEL_STRATIX10_SERVICE=y -CONFIG_TI_SCI_PROTOCOL=y +CONFIG_INTEL_STRATIX10_RSU=m CONFIG_EFI_CAPSULE_LOADER=y CONFIG_IMX_SCU=y CONFIG_IMX_SCU_PD=y @@ -121,7 +122,6 @@ CONFIG_MODULE_UNLOAD=y CONFIG_KSM=y CONFIG_MEMORY_FAILURE=y CONFIG_TRANSPARENT_HUGEPAGE=y -CONFIG_CMA=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -205,12 +205,12 @@ CONFIG_HISILICON_LPC=y CONFIG_SIMPLE_PM_BUS=y CONFIG_MTD=y CONFIG_MTD_BLOCK=y -CONFIG_MTD_M25P80=y CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_DENALI_DT=y CONFIG_MTD_NAND_MARVELL=y CONFIG_MTD_NAND_QCOM=y CONFIG_MTD_SPI_NOR=y +CONFIG_SPI_CADENCE_QUADSPI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=m CONFIG_VIRTIO_BLK=y @@ -265,18 +265,12 @@ CONFIG_HNS3_ENET=y CONFIG_E1000E=y CONFIG_IGB=y CONFIG_IGBVF=y -CONFIG_MLX4_EN=m -CONFIG_MLX4_CORE=m -CONFIG_MLX4_DEBUG=y -CONFIG_MLX4_CORE_GEN2=y -CONFIG_MLX5_CORE=m -CONFIG_MLX5_CORE_EN=y -CONFIG_MLX5_EN_ARFS=y -CONFIG_MLX5_EN_RXNFC=y -CONFIG_MLX5_MPFS=y CONFIG_MVNETA=y CONFIG_MVPP2=y CONFIG_SKY2=y +CONFIG_MLX4_EN=m +CONFIG_MLX5_CORE=m +CONFIG_MLX5_CORE_EN=y CONFIG_QCOM_EMAC=m CONFIG_RAVB=y CONFIG_SMC91X=y @@ -285,11 +279,11 @@ CONFIG_SNI_AVE=y CONFIG_SNI_NETSEC=y CONFIG_STMMAC_ETH=m CONFIG_MDIO_BUS_MUX_MMIOREG=y -CONFIG_AT803X_PHY=m CONFIG_MARVELL_PHY=m CONFIG_MARVELL_10G_PHY=m CONFIG_MESON_GXL_PHY=m CONFIG_MICREL_PHY=y +CONFIG_AT803X_PHY=y CONFIG_REALTEK_PHY=m CONFIG_ROCKCHIP_PHY=y CONFIG_USB_PEGASUS=m @@ -314,6 +308,7 @@ CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_ADC=m CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_SNVS_PWRKEY=m +CONFIG_KEYBOARD_IMX_SC_KEY=m CONFIG_KEYBOARD_CROS_EC=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=m @@ -352,6 +347,8 @@ CONFIG_SERIAL_XILINX_PS_UART=y CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y CONFIG_SERIAL_FSL_LPUART=y CONFIG_SERIAL_FSL_LPUART_CONSOLE=y +CONFIG_SERIAL_FSL_LINFLEXUART=y +CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE=y CONFIG_SERIAL_MVEBU_UART=y CONFIG_SERIAL_DEV_BUS=y CONFIG_VIRTIO_CONSOLE=y @@ -392,8 +389,8 @@ CONFIG_SPI_PL022=y CONFIG_SPI_ROCKCHIP=y CONFIG_SPI_QUP=y CONFIG_SPI_S3C64XX=y -CONFIG_SPI_SPIDEV=m CONFIG_SPI_SUN6I=y +CONFIG_SPI_SPIDEV=m CONFIG_SPMI=y CONFIG_PINCTRL_SINGLE=y CONFIG_PINCTRL_MAX77620=y @@ -411,6 +408,7 @@ CONFIG_PINCTRL_QDF2XXX=y CONFIG_PINCTRL_QCOM_SPMI_PMIC=y CONFIG_PINCTRL_SDM845=y CONFIG_PINCTRL_SM8150=y +CONFIG_GPIO_ALTERA=m CONFIG_GPIO_DWAPB=y CONFIG_GPIO_MB86S7X=y CONFIG_GPIO_PL061=y @@ -466,8 +464,6 @@ CONFIG_MFD_ALTERA_SYSMGR=y CONFIG_MFD_BD9571MWV=y CONFIG_MFD_AXP20X_I2C=y CONFIG_MFD_AXP20X_RSB=y -CONFIG_MFD_CROS_EC=y -CONFIG_MFD_CROS_EC_CHARDEV=m CONFIG_MFD_EXYNOS_LPASS=m CONFIG_MFD_HI6421_PMIC=y CONFIG_MFD_HI655X_PMIC=y @@ -662,9 +658,9 @@ CONFIG_RTC_DRV_SNVS=m CONFIG_RTC_DRV_IMX_SC=m CONFIG_RTC_DRV_XGENE=y CONFIG_DMADEVICES=y -CONFIG_FSL_EDMA=y CONFIG_DMA_BCM2835=m CONFIG_DMA_SUN6I=m +CONFIG_FSL_EDMA=y CONFIG_IMX_SDMA=y CONFIG_K3_DMA=y CONFIG_MV_XOR=y @@ -683,6 +679,7 @@ CONFIG_VIRTIO_BALLOON=y CONFIG_VIRTIO_MMIO=y CONFIG_XEN_GNTDEV=y CONFIG_XEN_GRANT_DEV_ALLOC=y +CONFIG_MFD_CROS_EC=y CONFIG_CROS_EC_I2C=y CONFIG_CROS_EC_SPI=y CONFIG_COMMON_CLK_RK808=y @@ -716,7 +713,6 @@ CONFIG_ARM_MHU=y CONFIG_IMX_MBOX=y CONFIG_PLATFORM_MHU=y CONFIG_BCM2835_MBOX=y -CONFIG_TI_MESSAGE_MANAGER=y CONFIG_QCOM_APCS_IPC=y CONFIG_ROCKCHIP_IOMMU=y CONFIG_TEGRA_IOMMU_SMMU=y @@ -732,7 +728,6 @@ CONFIG_RPMSG_QCOM_GLINK_SMEM=m CONFIG_RPMSG_QCOM_SMD=y CONFIG_RASPBERRYPI_POWER=y CONFIG_IMX_SCU_SOC=y -CONFIG_QCOM_COMMAND_DB=y CONFIG_QCOM_GENI_SE=y CONFIG_QCOM_GLINK_SSR=m CONFIG_QCOM_RPMH=y @@ -741,9 +736,11 @@ CONFIG_QCOM_SMD_RPM=y CONFIG_QCOM_SMP2P=y CONFIG_QCOM_SMSM=y CONFIG_ARCH_R8A774A1=y +CONFIG_ARCH_R8A774B1=y CONFIG_ARCH_R8A774C0=y CONFIG_ARCH_R8A7795=y CONFIG_ARCH_R8A7796=y +CONFIG_ARCH_R8A77961=y CONFIG_ARCH_R8A77965=y CONFIG_ARCH_R8A77970=y CONFIG_ARCH_R8A77980=y @@ -756,9 +753,7 @@ CONFIG_ARCH_TEGRA_186_SOC=y CONFIG_ARCH_TEGRA_194_SOC=y CONFIG_ARCH_K3_AM6_SOC=y CONFIG_ARCH_K3_J721E_SOC=y -CONFIG_SOC_TI=y CONFIG_TI_SCI_PM_DOMAINS=y -CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y CONFIG_EXTCON_USB_GPIO=y CONFIG_EXTCON_USBC_CROS_EC=y CONFIG_MEMORY=y @@ -801,15 +796,16 @@ CONFIG_PHY_ROCKCHIP_TYPEC=y CONFIG_PHY_UNIPHIER_USB2=y CONFIG_PHY_UNIPHIER_USB3=y CONFIG_PHY_TEGRA_XUSB=y +CONFIG_ARM_SMMU_V3_PMU=m CONFIG_FSL_IMX8_DDR_PMU=m CONFIG_HISI_PMU=y CONFIG_QCOM_L2_PMU=y CONFIG_QCOM_L3_PMU=y -CONFIG_NVMEM_SUNXI_SID=y CONFIG_NVMEM_IMX_OCOTP=y CONFIG_NVMEM_IMX_OCOTP_SCU=y CONFIG_QCOM_QFPROM=y CONFIG_ROCKCHIP_EFUSE=y +CONFIG_NVMEM_SUNXI_SID=y CONFIG_UNIPHIER_EFUSE=y CONFIG_MESON_EFUSE=m CONFIG_FPGA=y @@ -848,7 +844,8 @@ CONFIG_NLS_ISO8859_1=y CONFIG_SECURITY=y CONFIG_CRYPTO_ECHAINIV=y CONFIG_CRYPTO_ANSI_CPRNG=y -CONFIG_DMA_CMA=y +CONFIG_CRYPTO_DEV_SUN8I_CE=m +CONFIG_CRYPTO_DEV_HISI_ZIP=m CONFIG_CMA_SIZE_MBYTES=32 CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y diff --git a/arch/arm64/crypto/chacha-neon-glue.c b/arch/arm64/crypto/chacha-neon-glue.c index b08029d7bde6..c1f9660d104c 100644 --- a/arch/arm64/crypto/chacha-neon-glue.c +++ b/arch/arm64/crypto/chacha-neon-glue.c @@ -211,12 +211,13 @@ static int __init chacha_simd_mod_init(void) static_branch_enable(&have_neon); - return crypto_register_skciphers(algs, ARRAY_SIZE(algs)); + return IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER) ? + crypto_register_skciphers(algs, ARRAY_SIZE(algs)) : 0; } static void __exit chacha_simd_mod_fini(void) { - if (cpu_have_named_feature(ASIMD)) + if (IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER) && cpu_have_named_feature(ASIMD)) crypto_unregister_skciphers(algs, ARRAY_SIZE(algs)); } diff --git a/arch/arm64/crypto/poly1305-glue.c b/arch/arm64/crypto/poly1305-glue.c index dd843d0ee83a..83a2338a8826 100644 --- a/arch/arm64/crypto/poly1305-glue.c +++ b/arch/arm64/crypto/poly1305-glue.c @@ -220,12 +220,13 @@ static int __init neon_poly1305_mod_init(void) static_branch_enable(&have_neon); - return crypto_register_shash(&neon_poly1305_alg); + return IS_REACHABLE(CONFIG_CRYPTO_HASH) ? + crypto_register_shash(&neon_poly1305_alg) : 0; } static void __exit neon_poly1305_mod_exit(void) { - if (cpu_have_named_feature(ASIMD)) + if (IS_REACHABLE(CONFIG_CRYPTO_HASH) && cpu_have_named_feature(ASIMD)) crypto_unregister_shash(&neon_poly1305_alg); } diff --git a/arch/arm64/include/asm/Kbuild b/arch/arm64/include/asm/Kbuild index 98a5405c8558..bd23f87d6c55 100644 --- a/arch/arm64/include/asm/Kbuild +++ b/arch/arm64/include/asm/Kbuild @@ -16,7 +16,6 @@ generic-y += local64.h generic-y += mcs_spinlock.h generic-y += mm-arch-hooks.h generic-y += mmiowb.h -generic-y += msi.h generic-y += qrwlock.h generic-y += qspinlock.h generic-y += serial.h diff --git a/arch/arm64/include/asm/io.h b/arch/arm64/include/asm/io.h index 323cb306bd28..4e531f57147d 100644 --- a/arch/arm64/include/asm/io.h +++ b/arch/arm64/include/asm/io.h @@ -167,9 +167,7 @@ extern void iounmap(volatile void __iomem *addr); extern void __iomem *ioremap_cache(phys_addr_t phys_addr, size_t size); #define ioremap(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE)) -#define ioremap_nocache(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE)) #define ioremap_wc(addr, size) __ioremap((addr), (size), __pgprot(PROT_NORMAL_NC)) -#define ioremap_wt(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE)) /* * PCI configuration space mapping function. diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h index befe37d4bc0e..53d846f1bfe7 100644 --- a/arch/arm64/include/asm/kvm_mmu.h +++ b/arch/arm64/include/asm/kvm_mmu.h @@ -91,6 +91,7 @@ alternative_cb_end void kvm_update_va_mask(struct alt_instr *alt, __le32 *origptr, __le32 *updptr, int nr_inst); +void kvm_compute_layout(void); static inline unsigned long __kern_hyp_va(unsigned long v) { diff --git a/arch/arm64/include/asm/sections.h b/arch/arm64/include/asm/sections.h index 788ae971f11c..25a73aab438f 100644 --- a/arch/arm64/include/asm/sections.h +++ b/arch/arm64/include/asm/sections.h @@ -15,6 +15,7 @@ extern char __hyp_text_start[], __hyp_text_end[]; extern char __idmap_text_start[], __idmap_text_end[]; extern char __initdata_begin[], __initdata_end[]; extern char __inittext_begin[], __inittext_end[]; +extern char __exittext_begin[], __exittext_end[]; extern char __irqentry_text_start[], __irqentry_text_end[]; extern char __mmuoff_data_start[], __mmuoff_data_end[]; extern char __entry_tramp_text_start[], __entry_tramp_text_end[]; diff --git a/arch/arm64/include/asm/uaccess.h b/arch/arm64/include/asm/uaccess.h index 127712b0b970..32fc8061aa76 100644 --- a/arch/arm64/include/asm/uaccess.h +++ b/arch/arm64/include/asm/uaccess.h @@ -62,8 +62,13 @@ static inline unsigned long __range_ok(const void __user *addr, unsigned long si { unsigned long ret, limit = current_thread_info()->addr_limit; + /* + * Asynchronous I/O running in a kernel thread does not have the + * TIF_TAGGED_ADDR flag of the process owning the mm, so always untag + * the user address before checking. + */ if (IS_ENABLED(CONFIG_ARM64_TAGGED_ADDR_ABI) && - test_thread_flag(TIF_TAGGED_ADDR)) + (current->flags & PF_KTHREAD || test_thread_flag(TIF_TAGGED_ADDR))) addr = untagged_addr(addr); __chk_user_ptr(addr); diff --git a/arch/arm64/kernel/entry-ftrace.S b/arch/arm64/kernel/entry-ftrace.S index 4fe1514fcbfd..7d02f9966d34 100644 --- a/arch/arm64/kernel/entry-ftrace.S +++ b/arch/arm64/kernel/entry-ftrace.S @@ -133,7 +133,6 @@ ENTRY(ftrace_graph_caller) bl prepare_ftrace_return b ftrace_common_return ENDPROC(ftrace_graph_caller) -#else #endif #else /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */ @@ -287,6 +286,7 @@ GLOBAL(ftrace_graph_call) // ftrace_graph_caller(); mcount_exit ENDPROC(ftrace_caller) +#endif /* CONFIG_DYNAMIC_FTRACE */ #ifdef CONFIG_FUNCTION_GRAPH_TRACER /* @@ -307,7 +307,6 @@ ENTRY(ftrace_graph_caller) mcount_exit ENDPROC(ftrace_graph_caller) #endif /* CONFIG_FUNCTION_GRAPH_TRACER */ -#endif /* CONFIG_DYNAMIC_FTRACE */ #endif /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */ ENTRY(ftrace_stub) diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index 583f71abbe98..7c6a0a41676f 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -76,7 +76,8 @@ alternative_else_nop_endif #ifdef CONFIG_VMAP_STACK /* * Test whether the SP has overflowed, without corrupting a GPR. - * Task and IRQ stacks are aligned to (1 << THREAD_SHIFT). + * Task and IRQ stacks are aligned so that SP & (1 << THREAD_SHIFT) + * should always be zero. */ add sp, sp, x0 // sp' = sp + x0 sub x0, sp, x0 // x0' = sp' - x0 = (sp + x0) - x0 = sp diff --git a/arch/arm64/kernel/insn.c b/arch/arm64/kernel/insn.c index 513b29c3e735..4a9e773a177f 100644 --- a/arch/arm64/kernel/insn.c +++ b/arch/arm64/kernel/insn.c @@ -21,6 +21,7 @@ #include <asm/fixmap.h> #include <asm/insn.h> #include <asm/kprobes.h> +#include <asm/sections.h> #define AARCH64_INSN_SF_BIT BIT(31) #define AARCH64_INSN_N_BIT BIT(22) @@ -78,16 +79,29 @@ bool aarch64_insn_is_branch_imm(u32 insn) static DEFINE_RAW_SPINLOCK(patch_lock); +static bool is_exit_text(unsigned long addr) +{ + /* discarded with init text/data */ + return system_state < SYSTEM_RUNNING && + addr >= (unsigned long)__exittext_begin && + addr < (unsigned long)__exittext_end; +} + +static bool is_image_text(unsigned long addr) +{ + return core_kernel_text(addr) || is_exit_text(addr); +} + static void __kprobes *patch_map(void *addr, int fixmap) { unsigned long uintaddr = (uintptr_t) addr; - bool module = !core_kernel_text(uintaddr); + bool image = is_image_text(uintaddr); struct page *page; - if (module && IS_ENABLED(CONFIG_STRICT_MODULE_RWX)) - page = vmalloc_to_page(addr); - else if (!module) + if (image) page = phys_to_page(__pa_symbol(addr)); + else if (IS_ENABLED(CONFIG_STRICT_MODULE_RWX)) + page = vmalloc_to_page(addr); else return addr; diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index 21176d02e21a..6771c399d40c 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -1816,7 +1816,7 @@ int syscall_trace_enter(struct pt_regs *regs) } /* Do the secure computing after ptrace; failures should be fast. */ - if (secure_computing(NULL) == -1) + if (secure_computing() == -1) return -1; if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c index ab149bcc3dc7..d4ed9a19d8fe 100644 --- a/arch/arm64/kernel/smp.c +++ b/arch/arm64/kernel/smp.c @@ -31,6 +31,7 @@ #include <linux/of.h> #include <linux/irq_work.h> #include <linux/kexec.h> +#include <linux/kvm_host.h> #include <asm/alternative.h> #include <asm/atomic.h> @@ -39,6 +40,7 @@ #include <asm/cputype.h> #include <asm/cpu_ops.h> #include <asm/daifflags.h> +#include <asm/kvm_mmu.h> #include <asm/mmu_context.h> #include <asm/numa.h> #include <asm/pgtable.h> @@ -407,6 +409,8 @@ static void __init hyp_mode_check(void) "CPU: CPUs started in inconsistent modes"); else pr_info("CPU: All CPU(s) started at EL1\n"); + if (IS_ENABLED(CONFIG_KVM_ARM_HOST)) + kvm_compute_layout(); } void __init smp_cpus_done(unsigned int max_cpus) diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S index 841a8b4ce114..497f9675071d 100644 --- a/arch/arm64/kernel/vmlinux.lds.S +++ b/arch/arm64/kernel/vmlinux.lds.S @@ -158,9 +158,12 @@ SECTIONS __inittext_begin = .; INIT_TEXT_SECTION(8) + + __exittext_begin = .; .exit.text : { ARM_EXIT_KEEP(EXIT_TEXT) } + __exittext_end = .; . = ALIGN(4); .altinstructions : { diff --git a/arch/arm64/kvm/va_layout.c b/arch/arm64/kvm/va_layout.c index 2cf7d4b606c3..dab1fea4752a 100644 --- a/arch/arm64/kvm/va_layout.c +++ b/arch/arm64/kvm/va_layout.c @@ -22,7 +22,7 @@ static u8 tag_lsb; static u64 tag_val; static u64 va_mask; -static void compute_layout(void) +__init void kvm_compute_layout(void) { phys_addr_t idmap_addr = __pa_symbol(__hyp_idmap_text_start); u64 hyp_va_msb; @@ -110,9 +110,6 @@ void __init kvm_update_va_mask(struct alt_instr *alt, BUG_ON(nr_inst != 5); - if (!has_vhe() && !va_mask) - compute_layout(); - for (i = 0; i < nr_inst; i++) { u32 rd, rn, insn, oinsn; @@ -156,9 +153,6 @@ void kvm_patch_vector_branch(struct alt_instr *alt, return; } - if (!va_mask) - compute_layout(); - /* * Compute HYP VA by using the same computation as kern_hyp_va() */ diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c index 9239416e93d4..6c45350e33aa 100644 --- a/arch/arm64/mm/dma-mapping.c +++ b/arch/arm64/mm/dma-mapping.c @@ -13,14 +13,14 @@ #include <asm/cacheflush.h> -void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_device(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { __dma_map_area(phys_to_virt(paddr), size, dir); } -void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { __dma_unmap_area(phys_to_virt(paddr), size, dir); } diff --git a/arch/arm64/mm/dump.c b/arch/arm64/mm/dump.c index 93f9f77582ae..0a920b538a89 100644 --- a/arch/arm64/mm/dump.c +++ b/arch/arm64/mm/dump.c @@ -142,6 +142,7 @@ static const struct prot_bits pte_bits[] = { .mask = PTE_UXN, .val = PTE_UXN, .set = "UXN", + .clear = " ", }, { .mask = PTE_ATTRINDX_MASK, .val = PTE_ATTRINDX(MT_DEVICE_nGnRnE), diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c index be9481cdf3b9..b65dffdfb201 100644 --- a/arch/arm64/mm/init.c +++ b/arch/arm64/mm/init.c @@ -214,15 +214,14 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max) { struct memblock_region *reg; unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES]; - unsigned long max_dma32 = min; - unsigned long __maybe_unused max_dma = min; + unsigned long __maybe_unused max_dma, max_dma32; memset(zone_size, 0, sizeof(zone_size)); + max_dma = max_dma32 = min; #ifdef CONFIG_ZONE_DMA - max_dma = PFN_DOWN(arm64_dma_phys_limit); + max_dma = max_dma32 = PFN_DOWN(arm64_dma_phys_limit); zone_size[ZONE_DMA] = max_dma - min; - max_dma32 = max_dma; #endif #ifdef CONFIG_ZONE_DMA32 max_dma32 = PFN_DOWN(arm64_dma32_phys_limit); @@ -236,25 +235,23 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max) unsigned long start = memblock_region_memory_base_pfn(reg); unsigned long end = memblock_region_memory_end_pfn(reg); - if (start >= max) - continue; #ifdef CONFIG_ZONE_DMA - if (start < max_dma) { - unsigned long dma_end = min_not_zero(end, max_dma); + if (start >= min && start < max_dma) { + unsigned long dma_end = min(end, max_dma); zhole_size[ZONE_DMA] -= dma_end - start; + start = dma_end; } #endif #ifdef CONFIG_ZONE_DMA32 - if (start < max_dma32) { + if (start >= max_dma && start < max_dma32) { unsigned long dma32_end = min(end, max_dma32); - unsigned long dma32_start = max(start, max_dma); - zhole_size[ZONE_DMA32] -= dma32_end - dma32_start; + zhole_size[ZONE_DMA32] -= dma32_end - start; + start = dma32_end; } #endif - if (end > max_dma32) { + if (start >= max_dma32 && start < max) { unsigned long normal_end = min(end, max); - unsigned long normal_start = max(start, max_dma32); - zhole_size[ZONE_NORMAL] -= normal_end - normal_start; + zhole_size[ZONE_NORMAL] -= normal_end - start; } } diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c index a9f541912289..5a3b15a14a7f 100644 --- a/arch/arm64/mm/mmu.c +++ b/arch/arm64/mm/mmu.c @@ -1060,6 +1060,8 @@ int arch_add_memory(int nid, u64 start, u64 size, __create_pgd_mapping(swapper_pg_dir, start, __phys_to_virt(start), size, PAGE_KERNEL, __pgd_pgtable_alloc, flags); + memblock_clear_nomap(start, size); + return __add_pages(nid, start >> PAGE_SHIFT, size >> PAGE_SHIFT, restrictions); } diff --git a/arch/c6x/include/asm/pgtable.h b/arch/c6x/include/asm/pgtable.h index 0b6919c00413..197c473b796a 100644 --- a/arch/c6x/include/asm/pgtable.h +++ b/arch/c6x/include/asm/pgtable.h @@ -8,7 +8,7 @@ #ifndef _ASM_C6X_PGTABLE_H #define _ASM_C6X_PGTABLE_H -#include <asm-generic/4level-fixup.h> +#include <asm-generic/pgtable-nopud.h> #include <asm/setup.h> #include <asm/page.h> diff --git a/arch/c6x/mm/dma-coherent.c b/arch/c6x/mm/dma-coherent.c index b319808e8f6b..a5909091cb14 100644 --- a/arch/c6x/mm/dma-coherent.c +++ b/arch/c6x/mm/dma-coherent.c @@ -140,7 +140,7 @@ void __init coherent_mem_init(phys_addr_t start, u32 size) sizeof(long)); } -static void c6x_dma_sync(struct device *dev, phys_addr_t paddr, size_t size, +static void c6x_dma_sync(phys_addr_t paddr, size_t size, enum dma_data_direction dir) { BUG_ON(!valid_dma_direction(dir)); @@ -160,14 +160,14 @@ static void c6x_dma_sync(struct device *dev, phys_addr_t paddr, size_t size, } } -void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_device(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { - return c6x_dma_sync(dev, paddr, size, dir); + return c6x_dma_sync(paddr, size, dir); } -void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { - return c6x_dma_sync(dev, paddr, size, dir); + return c6x_dma_sync(paddr, size, dir); } diff --git a/arch/csky/Kconfig b/arch/csky/Kconfig index 3973847b5f42..da09c884cc30 100644 --- a/arch/csky/Kconfig +++ b/arch/csky/Kconfig @@ -17,6 +17,7 @@ config CSKY select IRQ_DOMAIN select HANDLE_DOMAIN_IRQ select DW_APB_TIMER_OF + select GENERIC_IOREMAP select GENERIC_LIB_ASHLDI3 select GENERIC_LIB_ASHRDI3 select GENERIC_LIB_LSHRDI3 diff --git a/arch/csky/include/asm/io.h b/arch/csky/include/asm/io.h index 80d071e2567f..332f51bc68fb 100644 --- a/arch/csky/include/asm/io.h +++ b/arch/csky/include/asm/io.h @@ -36,14 +36,9 @@ /* * I/O memory mapping functions. */ -extern void __iomem *ioremap_cache(phys_addr_t addr, size_t size); -extern void __iomem *__ioremap(phys_addr_t addr, size_t size, pgprot_t prot); -extern void iounmap(void *addr); - -#define ioremap(addr, size) __ioremap((addr), (size), pgprot_noncached(PAGE_KERNEL)) -#define ioremap_wc(addr, size) __ioremap((addr), (size), pgprot_writecombine(PAGE_KERNEL)) -#define ioremap_nocache(addr, size) ioremap((addr), (size)) -#define ioremap_cache ioremap_cache +#define ioremap_wc(addr, size) \ + ioremap_prot((addr), (size), \ + (_PAGE_IOREMAP & ~_CACHE_MASK) | _CACHE_UNCACHED) #include <asm-generic/io.h> diff --git a/arch/csky/include/asm/pgtable.h b/arch/csky/include/asm/pgtable.h index 7c21985c60dc..4b2a41e15f2e 100644 --- a/arch/csky/include/asm/pgtable.h +++ b/arch/csky/include/asm/pgtable.h @@ -86,6 +86,10 @@ #define PAGE_USERIO __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \ _CACHE_CACHED) +#define _PAGE_IOREMAP \ + (_PAGE_PRESENT | __READABLE | __WRITEABLE | _PAGE_GLOBAL | \ + _CACHE_UNCACHED | _PAGE_SO) + #define __P000 PAGE_NONE #define __P001 PAGE_READONLY #define __P010 PAGE_COPY diff --git a/arch/csky/mm/dma-mapping.c b/arch/csky/mm/dma-mapping.c index 06e85b565454..8f6571ae27c8 100644 --- a/arch/csky/mm/dma-mapping.c +++ b/arch/csky/mm/dma-mapping.c @@ -58,8 +58,8 @@ void arch_dma_prep_coherent(struct page *page, size_t size) cache_op(page_to_phys(page), size, dma_wbinv_set_zero_range); } -void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_device(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { switch (dir) { case DMA_TO_DEVICE: @@ -74,8 +74,8 @@ void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr, } } -void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { switch (dir) { case DMA_TO_DEVICE: diff --git a/arch/csky/mm/ioremap.c b/arch/csky/mm/ioremap.c index e13cd3497628..70c8268d3b2b 100644 --- a/arch/csky/mm/ioremap.c +++ b/arch/csky/mm/ioremap.c @@ -3,60 +3,8 @@ #include <linux/export.h> #include <linux/mm.h> -#include <linux/vmalloc.h> #include <linux/io.h> -#include <asm/pgtable.h> - -static void __iomem *__ioremap_caller(phys_addr_t addr, size_t size, - pgprot_t prot, void *caller) -{ - phys_addr_t last_addr; - unsigned long offset, vaddr; - struct vm_struct *area; - - last_addr = addr + size - 1; - if (!size || last_addr < addr) - return NULL; - - offset = addr & (~PAGE_MASK); - addr &= PAGE_MASK; - size = PAGE_ALIGN(size + offset); - - area = get_vm_area_caller(size, VM_IOREMAP, caller); - if (!area) - return NULL; - - vaddr = (unsigned long)area->addr; - - if (ioremap_page_range(vaddr, vaddr + size, addr, prot)) { - free_vm_area(area); - return NULL; - } - - return (void __iomem *)(vaddr + offset); -} - -void __iomem *__ioremap(phys_addr_t phys_addr, size_t size, pgprot_t prot) -{ - return __ioremap_caller(phys_addr, size, prot, - __builtin_return_address(0)); -} -EXPORT_SYMBOL(__ioremap); - -void __iomem *ioremap_cache(phys_addr_t phys_addr, size_t size) -{ - return __ioremap_caller(phys_addr, size, PAGE_KERNEL, - __builtin_return_address(0)); -} -EXPORT_SYMBOL(ioremap_cache); - -void iounmap(void __iomem *addr) -{ - vunmap((void *)((unsigned long)addr & PAGE_MASK)); -} -EXPORT_SYMBOL(iounmap); - pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, unsigned long size, pgprot_t vma_prot) { diff --git a/arch/hexagon/include/asm/io.h b/arch/hexagon/include/asm/io.h index ba1a444d55b3..539e3efcf39c 100644 --- a/arch/hexagon/include/asm/io.h +++ b/arch/hexagon/include/asm/io.h @@ -27,7 +27,7 @@ extern int remap_area_pages(unsigned long start, unsigned long phys_addr, unsigned long end, unsigned long flags); -extern void __iounmap(const volatile void __iomem *addr); +extern void iounmap(const volatile void __iomem *addr); /* Defined in lib/io.c, needed for smc91x driver. */ extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen); @@ -171,21 +171,9 @@ static inline void writel(u32 data, volatile void __iomem *addr) #define writew_relaxed __raw_writew #define writel_relaxed __raw_writel -/* - * Need an mtype somewhere in here, for cache type deals? - * This is probably too long for an inline. - */ -void __iomem *ioremap_nocache(unsigned long phys_addr, unsigned long size); +void __iomem *ioremap(unsigned long phys_addr, unsigned long size); +#define ioremap_nocache ioremap -static inline void __iomem *ioremap(unsigned long phys_addr, unsigned long size) -{ - return ioremap_nocache(phys_addr, size); -} - -static inline void iounmap(volatile void __iomem *addr) -{ - __iounmap(addr); -} #define __raw_writel writel diff --git a/arch/hexagon/include/uapi/asm/bitsperlong.h b/arch/hexagon/include/uapi/asm/bitsperlong.h deleted file mode 100644 index 5adca0d26913..000000000000 --- a/arch/hexagon/include/uapi/asm/bitsperlong.h +++ /dev/null @@ -1,27 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#ifndef __ASM_HEXAGON_BITSPERLONG_H -#define __ASM_HEXAGON_BITSPERLONG_H - -#define __BITS_PER_LONG 32 - -#include <asm-generic/bitsperlong.h> - -#endif diff --git a/arch/hexagon/kernel/dma.c b/arch/hexagon/kernel/dma.c index f561b127c4b4..25f388d9cfcc 100644 --- a/arch/hexagon/kernel/dma.c +++ b/arch/hexagon/kernel/dma.c @@ -55,8 +55,8 @@ void arch_dma_free(struct device *dev, size_t size, void *vaddr, gen_pool_free(coherent_pool, (unsigned long) vaddr, size); } -void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_device(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { void *addr = phys_to_virt(paddr); diff --git a/arch/hexagon/kernel/hexagon_ksyms.c b/arch/hexagon/kernel/hexagon_ksyms.c index cf8974beb500..6fb1aaab1c29 100644 --- a/arch/hexagon/kernel/hexagon_ksyms.c +++ b/arch/hexagon/kernel/hexagon_ksyms.c @@ -14,13 +14,13 @@ EXPORT_SYMBOL(__clear_user_hexagon); EXPORT_SYMBOL(raw_copy_from_user); EXPORT_SYMBOL(raw_copy_to_user); -EXPORT_SYMBOL(__iounmap); +EXPORT_SYMBOL(iounmap); EXPORT_SYMBOL(__strnlen_user); EXPORT_SYMBOL(__vmgetie); EXPORT_SYMBOL(__vmsetie); EXPORT_SYMBOL(__vmyield); EXPORT_SYMBOL(empty_zero_page); -EXPORT_SYMBOL(ioremap_nocache); +EXPORT_SYMBOL(ioremap); EXPORT_SYMBOL(memcpy); EXPORT_SYMBOL(memset); diff --git a/arch/hexagon/mm/ioremap.c b/arch/hexagon/mm/ioremap.c index 77d8e1e69e9b..255c5b1ee1a7 100644 --- a/arch/hexagon/mm/ioremap.c +++ b/arch/hexagon/mm/ioremap.c @@ -9,7 +9,7 @@ #include <linux/vmalloc.h> #include <linux/mm.h> -void __iomem *ioremap_nocache(unsigned long phys_addr, unsigned long size) +void __iomem *ioremap(unsigned long phys_addr, unsigned long size) { unsigned long last_addr, addr; unsigned long offset = phys_addr & ~PAGE_MASK; @@ -38,7 +38,7 @@ void __iomem *ioremap_nocache(unsigned long phys_addr, unsigned long size) return (void __iomem *) (offset + addr); } -void __iounmap(const volatile void __iomem *addr) +void iounmap(const volatile void __iomem *addr) { vunmap((void *) ((unsigned long) addr & PAGE_MASK)); } diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 16714477eef4..bab7cd878464 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -33,7 +33,7 @@ config IA64 select HAVE_ARCH_TRACEHOOK select HAVE_MEMBLOCK_NODE_MAP select HAVE_VIRT_CPU_ACCOUNTING - select ARCH_HAS_DMA_COHERENT_TO_PFN + select DMA_NONCOHERENT_MMAP select ARCH_HAS_SYNC_DMA_FOR_CPU select VIRT_TO_BUS select GENERIC_IRQ_PROBE diff --git a/arch/ia64/include/asm/agp.h b/arch/ia64/include/asm/agp.h index 2b451c4496da..0261507dc264 100644 --- a/arch/ia64/include/asm/agp.h +++ b/arch/ia64/include/asm/agp.h @@ -14,8 +14,8 @@ * in coherent mode, which lets us map the AGP memory as normal (write-back) memory * (unlike x86, where it gets mapped "write-coalescing"). */ -#define map_page_into_agp(page) /* nothing */ -#define unmap_page_from_agp(page) /* nothing */ +#define map_page_into_agp(page) do { } while (0) +#define unmap_page_from_agp(page) do { } while (0) #define flush_agp_cache() mb() /* GATT allocation. Returns/accepts GATT kernel virtual address. */ diff --git a/arch/ia64/include/asm/io.h b/arch/ia64/include/asm/io.h index 54e70c21352a..3d666a11a2de 100644 --- a/arch/ia64/include/asm/io.h +++ b/arch/ia64/include/asm/io.h @@ -256,16 +256,15 @@ static inline void outsl(unsigned long port, const void *src, # ifdef __KERNEL__ extern void __iomem * ioremap(unsigned long offset, unsigned long size); -extern void __iomem * ioremap_nocache (unsigned long offset, unsigned long size); +extern void __iomem * ioremap_uc(unsigned long offset, unsigned long size); extern void iounmap (volatile void __iomem *addr); static inline void __iomem * ioremap_cache (unsigned long phys_addr, unsigned long size) { return ioremap(phys_addr, size); } #define ioremap ioremap -#define ioremap_nocache ioremap_nocache #define ioremap_cache ioremap_cache -#define ioremap_uc ioremap_nocache +#define ioremap_uc ioremap_uc #define iounmap iounmap /* diff --git a/arch/ia64/include/asm/iommu.h b/arch/ia64/include/asm/iommu.h index 7904f591a79b..eb0db20c9d4c 100644 --- a/arch/ia64/include/asm/iommu.h +++ b/arch/ia64/include/asm/iommu.h @@ -2,6 +2,8 @@ #ifndef _ASM_IA64_IOMMU_H #define _ASM_IA64_IOMMU_H 1 +#include <linux/acpi.h> + /* 10 seconds */ #define DMAR_OPERATION_TIMEOUT (((cycles_t) local_cpu_data->itc_freq)*10) @@ -9,6 +11,9 @@ extern void no_iommu_init(void); #ifdef CONFIG_INTEL_IOMMU extern int force_iommu, no_iommu; extern int iommu_detected; + +static inline int __init +arch_rmrr_sanity_check(struct acpi_dmar_reserved_memory *rmrr) { return 0; } #else #define no_iommu (1) #define iommu_detected (0) diff --git a/arch/ia64/include/asm/irqflags.h b/arch/ia64/include/asm/irqflags.h index d97f8435be4f..1dc30f12e545 100644 --- a/arch/ia64/include/asm/irqflags.h +++ b/arch/ia64/include/asm/irqflags.h @@ -36,11 +36,7 @@ static inline void arch_maybe_save_ip(unsigned long flags) static inline unsigned long arch_local_save_flags(void) { ia64_stop(); -#ifdef CONFIG_PARAVIRT - return ia64_get_psr_i(); -#else return ia64_getreg(_IA64_REG_PSR); -#endif } static inline unsigned long arch_local_irq_save(void) diff --git a/arch/ia64/include/uapi/asm/errno.h b/arch/ia64/include/uapi/asm/errno.h deleted file mode 100644 index 9addba592646..000000000000 --- a/arch/ia64/include/uapi/asm/errno.h +++ /dev/null @@ -1,2 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#include <asm-generic/errno.h> diff --git a/arch/ia64/include/uapi/asm/gcc_intrin.h b/arch/ia64/include/uapi/asm/gcc_intrin.h index c60696fd1e37..ecfa3eadb217 100644 --- a/arch/ia64/include/uapi/asm/gcc_intrin.h +++ b/arch/ia64/include/uapi/asm/gcc_intrin.h @@ -31,7 +31,7 @@ extern void ia64_bad_param_for_setreg (void); extern void ia64_bad_param_for_getreg (void); -#define ia64_native_setreg(regnum, val) \ +#define ia64_setreg(regnum, val) \ ({ \ switch (regnum) { \ case _IA64_REG_PSR_L: \ @@ -60,7 +60,7 @@ extern void ia64_bad_param_for_getreg (void); } \ }) -#define ia64_native_getreg(regnum) \ +#define ia64_getreg(regnum) \ ({ \ __u64 ia64_intri_res; \ \ @@ -384,7 +384,7 @@ extern void ia64_bad_param_for_getreg (void); #define ia64_invala() asm volatile ("invala" ::: "memory") -#define ia64_native_thash(addr) \ +#define ia64_thash(addr) \ ({ \ unsigned long ia64_intri_res; \ asm volatile ("thash %0=%1" : "=r"(ia64_intri_res) : "r" (addr)); \ @@ -437,10 +437,10 @@ extern void ia64_bad_param_for_getreg (void); #define ia64_set_pmd(index, val) \ asm volatile ("mov pmd[%0]=%1" :: "r"(index), "r"(val) : "memory") -#define ia64_native_set_rr(index, val) \ +#define ia64_set_rr(index, val) \ asm volatile ("mov rr[%0]=%1" :: "r"(index), "r"(val) : "memory"); -#define ia64_native_get_cpuid(index) \ +#define ia64_get_cpuid(index) \ ({ \ unsigned long ia64_intri_res; \ asm volatile ("mov %0=cpuid[%r1]" : "=r"(ia64_intri_res) : "rO"(index)); \ @@ -476,33 +476,33 @@ extern void ia64_bad_param_for_getreg (void); }) -#define ia64_native_get_pmd(index) \ +#define ia64_get_pmd(index) \ ({ \ unsigned long ia64_intri_res; \ asm volatile ("mov %0=pmd[%1]" : "=r"(ia64_intri_res) : "r"(index)); \ ia64_intri_res; \ }) -#define ia64_native_get_rr(index) \ +#define ia64_get_rr(index) \ ({ \ unsigned long ia64_intri_res; \ asm volatile ("mov %0=rr[%1]" : "=r"(ia64_intri_res) : "r" (index)); \ ia64_intri_res; \ }) -#define ia64_native_fc(addr) asm volatile ("fc %0" :: "r"(addr) : "memory") +#define ia64_fc(addr) asm volatile ("fc %0" :: "r"(addr) : "memory") #define ia64_sync_i() asm volatile (";; sync.i" ::: "memory") -#define ia64_native_ssm(mask) asm volatile ("ssm %0":: "i"((mask)) : "memory") -#define ia64_native_rsm(mask) asm volatile ("rsm %0":: "i"((mask)) : "memory") +#define ia64_ssm(mask) asm volatile ("ssm %0":: "i"((mask)) : "memory") +#define ia64_rsm(mask) asm volatile ("rsm %0":: "i"((mask)) : "memory") #define ia64_sum(mask) asm volatile ("sum %0":: "i"((mask)) : "memory") #define ia64_rum(mask) asm volatile ("rum %0":: "i"((mask)) : "memory") #define ia64_ptce(addr) asm volatile ("ptc.e %0" :: "r"(addr)) -#define ia64_native_ptcga(addr, size) \ +#define ia64_ptcga(addr, size) \ do { \ asm volatile ("ptc.ga %0,%1" :: "r"(addr), "r"(size) : "memory"); \ ia64_dv_serialize_data(); \ @@ -607,7 +607,7 @@ do { \ } \ }) -#define ia64_native_intrin_local_irq_restore(x) \ +#define ia64_intrin_local_irq_restore(x) \ do { \ asm volatile (";; cmp.ne p6,p7=%0,r0;;" \ "(p6) ssm psr.i;" \ diff --git a/arch/ia64/include/uapi/asm/intel_intrin.h b/arch/ia64/include/uapi/asm/intel_intrin.h index ab649691545a..dc1884dc54b5 100644 --- a/arch/ia64/include/uapi/asm/intel_intrin.h +++ b/arch/ia64/include/uapi/asm/intel_intrin.h @@ -17,8 +17,8 @@ * intrinsic */ -#define ia64_native_getreg __getReg -#define ia64_native_setreg __setReg +#define ia64_getreg __getReg +#define ia64_setreg __setReg #define ia64_hint __hint #define ia64_hint_pause __hint_pause @@ -40,10 +40,10 @@ #define ia64_invala_fr __invala_fr #define ia64_nop __nop #define ia64_sum __sum -#define ia64_native_ssm __ssm +#define ia64_ssm __ssm #define ia64_rum __rum -#define ia64_native_rsm __rsm -#define ia64_native_fc __fc +#define ia64_rsm __rsm +#define ia64_fc __fc #define ia64_ldfs __ldfs #define ia64_ldfd __ldfd @@ -89,17 +89,17 @@ __setIndReg(_IA64_REG_INDR_PMC, index, val) #define ia64_set_pmd(index, val) \ __setIndReg(_IA64_REG_INDR_PMD, index, val) -#define ia64_native_set_rr(index, val) \ +#define ia64_set_rr(index, val) \ __setIndReg(_IA64_REG_INDR_RR, index, val) -#define ia64_native_get_cpuid(index) \ +#define ia64_get_cpuid(index) \ __getIndReg(_IA64_REG_INDR_CPUID, index) #define __ia64_get_dbr(index) __getIndReg(_IA64_REG_INDR_DBR, index) #define ia64_get_ibr(index) __getIndReg(_IA64_REG_INDR_IBR, index) #define ia64_get_pkr(index) __getIndReg(_IA64_REG_INDR_PKR, index) #define ia64_get_pmc(index) __getIndReg(_IA64_REG_INDR_PMC, index) -#define ia64_native_get_pmd(index) __getIndReg(_IA64_REG_INDR_PMD, index) -#define ia64_native_get_rr(index) __getIndReg(_IA64_REG_INDR_RR, index) +#define ia64_get_pmd(index) __getIndReg(_IA64_REG_INDR_PMD, index) +#define ia64_get_rr(index) __getIndReg(_IA64_REG_INDR_RR, index) #define ia64_srlz_d __dsrlz #define ia64_srlz_i __isrlz @@ -121,16 +121,16 @@ #define ia64_ld8_acq __ld8_acq #define ia64_sync_i __synci -#define ia64_native_thash __thash -#define ia64_native_ttag __ttag +#define ia64_thash __thash +#define ia64_ttag __ttag #define ia64_itcd __itcd #define ia64_itci __itci #define ia64_itrd __itrd #define ia64_itri __itri #define ia64_ptce __ptce #define ia64_ptcl __ptcl -#define ia64_native_ptcg __ptcg -#define ia64_native_ptcga __ptcga +#define ia64_ptcg __ptcg +#define ia64_ptcga __ptcga #define ia64_ptri __ptri #define ia64_ptrd __ptrd #define ia64_dep_mi _m64_dep_mi @@ -147,13 +147,13 @@ #define ia64_lfetch_fault __lfetch_fault #define ia64_lfetch_fault_excl __lfetch_fault_excl -#define ia64_native_intrin_local_irq_restore(x) \ +#define ia64_intrin_local_irq_restore(x) \ do { \ if ((x) != 0) { \ - ia64_native_ssm(IA64_PSR_I); \ + ia64_ssm(IA64_PSR_I); \ ia64_srlz_d(); \ } else { \ - ia64_native_rsm(IA64_PSR_I); \ + ia64_rsm(IA64_PSR_I); \ } \ } while (0) diff --git a/arch/ia64/include/uapi/asm/intrinsics.h b/arch/ia64/include/uapi/asm/intrinsics.h index aecc217eca63..a0e0a064f5b1 100644 --- a/arch/ia64/include/uapi/asm/intrinsics.h +++ b/arch/ia64/include/uapi/asm/intrinsics.h @@ -21,15 +21,13 @@ #endif #include <asm/cmpxchg.h> -#define ia64_native_get_psr_i() (ia64_native_getreg(_IA64_REG_PSR) & IA64_PSR_I) - -#define ia64_native_set_rr0_to_rr4(val0, val1, val2, val3, val4) \ +#define ia64_set_rr0_to_rr4(val0, val1, val2, val3, val4) \ do { \ - ia64_native_set_rr(0x0000000000000000UL, (val0)); \ - ia64_native_set_rr(0x2000000000000000UL, (val1)); \ - ia64_native_set_rr(0x4000000000000000UL, (val2)); \ - ia64_native_set_rr(0x6000000000000000UL, (val3)); \ - ia64_native_set_rr(0x8000000000000000UL, (val4)); \ + ia64_set_rr(0x0000000000000000UL, (val0)); \ + ia64_set_rr(0x2000000000000000UL, (val1)); \ + ia64_set_rr(0x4000000000000000UL, (val2)); \ + ia64_set_rr(0x6000000000000000UL, (val3)); \ + ia64_set_rr(0x8000000000000000UL, (val4)); \ } while (0) /* @@ -85,41 +83,4 @@ extern unsigned long __bad_increment_for_ia64_fetch_and_add (void); #endif - -#ifndef __ASSEMBLY__ - -#define IA64_INTRINSIC_API(name) ia64_native_ ## name -#define IA64_INTRINSIC_MACRO(name) ia64_native_ ## name - - -/************************************************/ -/* Instructions paravirtualized for correctness */ -/************************************************/ -/* fc, thash, get_cpuid, get_pmd, get_eflags, set_eflags */ -/* Note that "ttag" and "cover" are also privilege-sensitive; "ttag" - * is not currently used (though it may be in a long-format VHPT system!) - */ -#define ia64_fc IA64_INTRINSIC_API(fc) -#define ia64_thash IA64_INTRINSIC_API(thash) -#define ia64_get_cpuid IA64_INTRINSIC_API(get_cpuid) -#define ia64_get_pmd IA64_INTRINSIC_API(get_pmd) - - -/************************************************/ -/* Instructions paravirtualized for performance */ -/************************************************/ -#define ia64_ssm IA64_INTRINSIC_MACRO(ssm) -#define ia64_rsm IA64_INTRINSIC_MACRO(rsm) -#define ia64_getreg IA64_INTRINSIC_MACRO(getreg) -#define ia64_setreg IA64_INTRINSIC_API(setreg) -#define ia64_set_rr IA64_INTRINSIC_API(set_rr) -#define ia64_get_rr IA64_INTRINSIC_API(get_rr) -#define ia64_ptcga IA64_INTRINSIC_API(ptcga) -#define ia64_get_psr_i IA64_INTRINSIC_API(get_psr_i) -#define ia64_intrin_local_irq_restore \ - IA64_INTRINSIC_API(intrin_local_irq_restore) -#define ia64_set_rr0_to_rr4 IA64_INTRINSIC_API(set_rr0_to_rr4) - -#endif /* !__ASSEMBLY__ */ - #endif /* _UAPI_ASM_IA64_INTRINSICS_H */ diff --git a/arch/ia64/include/uapi/asm/ioctl.h b/arch/ia64/include/uapi/asm/ioctl.h deleted file mode 100644 index b809c4566e5f..000000000000 --- a/arch/ia64/include/uapi/asm/ioctl.h +++ /dev/null @@ -1,2 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#include <asm-generic/ioctl.h> diff --git a/arch/ia64/include/uapi/asm/ioctls.h b/arch/ia64/include/uapi/asm/ioctls.h deleted file mode 100644 index b86001940209..000000000000 --- a/arch/ia64/include/uapi/asm/ioctls.h +++ /dev/null @@ -1,7 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _ASM_IA64_IOCTLS_H -#define _ASM_IA64_IOCTLS_H - -#include <asm-generic/ioctls.h> - -#endif /* _ASM_IA64_IOCTLS_H */ diff --git a/arch/ia64/kernel/asm-offsets.c b/arch/ia64/kernel/asm-offsets.c index 00e8e2a1eb19..fb0deb8a4221 100644 --- a/arch/ia64/kernel/asm-offsets.c +++ b/arch/ia64/kernel/asm-offsets.c @@ -211,7 +211,7 @@ void foo(void) offsetof (struct cpuinfo_ia64, ptce_stride)); BLANK(); DEFINE(IA64_TIMESPEC_TV_NSEC_OFFSET, - offsetof (struct timespec, tv_nsec)); + offsetof (struct __kernel_old_timespec, tv_nsec)); DEFINE(IA64_TIME_SN_SPEC_SNSEC_OFFSET, offsetof (struct time_sn_spec, snsec)); diff --git a/arch/ia64/kernel/dma-mapping.c b/arch/ia64/kernel/dma-mapping.c index 4a3262795890..09ef9ce9988d 100644 --- a/arch/ia64/kernel/dma-mapping.c +++ b/arch/ia64/kernel/dma-mapping.c @@ -19,9 +19,3 @@ void arch_dma_free(struct device *dev, size_t size, void *cpu_addr, { dma_direct_free_pages(dev, size, cpu_addr, dma_addr, attrs); } - -long arch_dma_coherent_to_pfn(struct device *dev, void *cpu_addr, - dma_addr_t dma_addr) -{ - return page_to_pfn(virt_to_page(cpu_addr)); -} diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index bf9df2625bc8..58fd67068bac 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -73,8 +73,8 @@ __ia64_sync_icache_dcache (pte_t pte) * DMA can be marked as "clean" so that lazy_mmu_prot_update() doesn't have to * flush them when they get mapped into an executable vm-area. */ -void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { unsigned long pfn = PHYS_PFN(paddr); diff --git a/arch/ia64/mm/ioremap.c b/arch/ia64/mm/ioremap.c index 0c0de2c4ec69..a09cfa064536 100644 --- a/arch/ia64/mm/ioremap.c +++ b/arch/ia64/mm/ioremap.c @@ -99,14 +99,14 @@ ioremap (unsigned long phys_addr, unsigned long size) EXPORT_SYMBOL(ioremap); void __iomem * -ioremap_nocache (unsigned long phys_addr, unsigned long size) +ioremap_uc(unsigned long phys_addr, unsigned long size) { if (kern_mem_attribute(phys_addr, size) & EFI_MEMORY_WB) return NULL; return __ioremap_uc(phys_addr); } -EXPORT_SYMBOL(ioremap_nocache); +EXPORT_SYMBOL(ioremap_uc); void early_iounmap (volatile void __iomem *addr, unsigned long size) diff --git a/arch/m68k/coldfire/entry.S b/arch/m68k/coldfire/entry.S index 52d312d5b4d4..d43a02795a4a 100644 --- a/arch/m68k/coldfire/entry.S +++ b/arch/m68k/coldfire/entry.S @@ -108,7 +108,7 @@ ret_from_exception: btst #5,%sp@(PT_OFF_SR) /* check if returning to kernel */ jeq Luser_return /* if so, skip resched, signals */ -#ifdef CONFIG_PREEMPT +#ifdef CONFIG_PREEMPTION movel %sp,%d1 /* get thread_info pointer */ andl #-THREAD_SIZE,%d1 /* at base of kernel stack */ movel %d1,%a0 diff --git a/arch/m68k/configs/m5475evb_defconfig b/arch/m68k/configs/m5475evb_defconfig index 434bd3750966..579fd98afed6 100644 --- a/arch/m68k/configs/m5475evb_defconfig +++ b/arch/m68k/configs/m5475evb_defconfig @@ -1,6 +1,5 @@ # CONFIG_SWAP is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set diff --git a/arch/m68k/include/asm/kmap.h b/arch/m68k/include/asm/kmap.h index 421b6c9c769d..559cb91bede1 100644 --- a/arch/m68k/include/asm/kmap.h +++ b/arch/m68k/include/asm/kmap.h @@ -20,7 +20,6 @@ extern void __iomem *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag); #define iounmap iounmap extern void iounmap(void __iomem *addr); -extern void __iounmap(void *addr, unsigned long size); #define ioremap ioremap static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size) diff --git a/arch/m68k/include/asm/mcf_pgalloc.h b/arch/m68k/include/asm/mcf_pgalloc.h index b34d44d666a4..82ec54c2eaa4 100644 --- a/arch/m68k/include/asm/mcf_pgalloc.h +++ b/arch/m68k/include/asm/mcf_pgalloc.h @@ -28,9 +28,6 @@ extern inline pmd_t *pmd_alloc_kernel(pgd_t *pgd, unsigned long address) return (pmd_t *) pgd; } -#define pmd_alloc_one_fast(mm, address) ({ BUG(); ((pmd_t *)1); }) -#define pmd_alloc_one(mm, address) ({ BUG(); ((pmd_t *)2); }) - #define pmd_populate(mm, pmd, page) (pmd_val(*pmd) = \ (unsigned long)(page_address(page))) @@ -45,8 +42,6 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page, __free_page(page); } -#define __pmd_free_tlb(tlb, pmd, address) do { } while (0) - static inline struct page *pte_alloc_one(struct mm_struct *mm) { struct page *page = alloc_pages(GFP_DMA, 0); @@ -100,6 +95,4 @@ static inline pgd_t *pgd_alloc(struct mm_struct *mm) return new_pgd; } -#define pgd_populate(mm, pmd, pte) BUG() - #endif /* M68K_MCF_PGALLOC_H */ diff --git a/arch/m68k/include/asm/mcf_pgtable.h b/arch/m68k/include/asm/mcf_pgtable.h index 5d5502cb2b2d..b9f45aeded25 100644 --- a/arch/m68k/include/asm/mcf_pgtable.h +++ b/arch/m68k/include/asm/mcf_pgtable.h @@ -198,17 +198,9 @@ static inline int pmd_bad2(pmd_t *pmd) { return 0; } #define pmd_present(pmd) (!pmd_none2(&(pmd))) static inline void pmd_clear(pmd_t *pmdp) { pmd_val(*pmdp) = 0; } -static inline int pgd_none(pgd_t pgd) { return 0; } -static inline int pgd_bad(pgd_t pgd) { return 0; } -static inline int pgd_present(pgd_t pgd) { return 1; } -static inline void pgd_clear(pgd_t *pgdp) {} - #define pte_ERROR(e) \ printk(KERN_ERR "%s:%d: bad pte %08lx.\n", \ __FILE__, __LINE__, pte_val(e)) -#define pmd_ERROR(e) \ - printk(KERN_ERR "%s:%d: bad pmd %08lx.\n", \ - __FILE__, __LINE__, pmd_val(e)) #define pgd_ERROR(e) \ printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \ __FILE__, __LINE__, pgd_val(e)) @@ -340,14 +332,6 @@ extern pgd_t kernel_pg_dir[PTRS_PER_PGD]; #define pgd_offset_k(address) pgd_offset(&init_mm, address) /* - * Find an entry in the second-level pagetable. - */ -static inline pmd_t *pmd_offset(pgd_t *pgd, unsigned long address) -{ - return (pmd_t *) pgd; -} - -/* * Find an entry in the third-level pagetable. */ #define __pte_offset(address) ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) @@ -360,12 +344,16 @@ static inline pmd_t *pmd_offset(pgd_t *pgd, unsigned long address) static inline void nocache_page(void *vaddr) { pgd_t *dir; + p4d_t *p4dp; + pud_t *pudp; pmd_t *pmdp; pte_t *ptep; unsigned long addr = (unsigned long) vaddr; dir = pgd_offset_k(addr); - pmdp = pmd_offset(dir, addr); + p4dp = p4d_offset(dir, addr); + pudp = pud_offset(p4dp, addr); + pmdp = pmd_offset(pudp, addr); ptep = pte_offset_kernel(pmdp, addr); *ptep = pte_mknocache(*ptep); } @@ -376,12 +364,16 @@ static inline void nocache_page(void *vaddr) static inline void cache_page(void *vaddr) { pgd_t *dir; + p4d_t *p4dp; + pud_t *pudp; pmd_t *pmdp; pte_t *ptep; unsigned long addr = (unsigned long) vaddr; dir = pgd_offset_k(addr); - pmdp = pmd_offset(dir, addr); + p4dp = p4d_offset(dir, addr); + pudp = pud_offset(p4dp, addr); + pmdp = pmd_offset(pudp, addr); ptep = pte_offset_kernel(pmdp, addr); *ptep = pte_mkcache(*ptep); } diff --git a/arch/m68k/include/asm/mmu_context.h b/arch/m68k/include/asm/mmu_context.h index f5b1852b4663..cac9f289d1f6 100644 --- a/arch/m68k/include/asm/mmu_context.h +++ b/arch/m68k/include/asm/mmu_context.h @@ -100,6 +100,8 @@ static inline void load_ksp_mmu(struct task_struct *task) struct mm_struct *mm; int asid; pgd_t *pgd; + p4d_t *p4d; + pud_t *pud; pmd_t *pmd; pte_t *pte; unsigned long mmuar; @@ -127,7 +129,15 @@ static inline void load_ksp_mmu(struct task_struct *task) if (pgd_none(*pgd)) goto bug; - pmd = pmd_offset(pgd, mmuar); + p4d = p4d_offset(pgd, mmuar); + if (p4d_none(*p4d)) + goto bug; + + pud = pud_offset(p4d, mmuar); + if (pud_none(*pud)) + goto bug; + + pmd = pmd_offset(pud, mmuar); if (pmd_none(*pmd)) goto bug; diff --git a/arch/m68k/include/asm/motorola_pgalloc.h b/arch/m68k/include/asm/motorola_pgalloc.h index acab315c851f..ff9cc401ffd1 100644 --- a/arch/m68k/include/asm/motorola_pgalloc.h +++ b/arch/m68k/include/asm/motorola_pgalloc.h @@ -106,9 +106,9 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t page } #define pmd_pgtable(pmd) pmd_page(pmd) -static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmd) +static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) { - pgd_set(pgd, pmd); + pud_set(pud, pmd); } #endif /* _MOTOROLA_PGALLOC_H */ diff --git a/arch/m68k/include/asm/motorola_pgtable.h b/arch/m68k/include/asm/motorola_pgtable.h index 7f66a7bad7a5..62bedc61f110 100644 --- a/arch/m68k/include/asm/motorola_pgtable.h +++ b/arch/m68k/include/asm/motorola_pgtable.h @@ -117,14 +117,14 @@ static inline void pmd_set(pmd_t *pmdp, pte_t *ptep) } } -static inline void pgd_set(pgd_t *pgdp, pmd_t *pmdp) +static inline void pud_set(pud_t *pudp, pmd_t *pmdp) { - pgd_val(*pgdp) = _PAGE_TABLE | _PAGE_ACCESSED | __pa(pmdp); + pud_val(*pudp) = _PAGE_TABLE | _PAGE_ACCESSED | __pa(pmdp); } #define __pte_page(pte) ((unsigned long)__va(pte_val(pte) & PAGE_MASK)) #define __pmd_page(pmd) ((unsigned long)__va(pmd_val(pmd) & _TABLE_MASK)) -#define __pgd_page(pgd) ((unsigned long)__va(pgd_val(pgd) & _TABLE_MASK)) +#define pud_page_vaddr(pud) ((unsigned long)__va(pud_val(pud) & _TABLE_MASK)) #define pte_none(pte) (!pte_val(pte)) @@ -147,11 +147,11 @@ static inline void pgd_set(pgd_t *pgdp, pmd_t *pmdp) #define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd))) -#define pgd_none(pgd) (!pgd_val(pgd)) -#define pgd_bad(pgd) ((pgd_val(pgd) & _DESCTYPE_MASK) != _PAGE_TABLE) -#define pgd_present(pgd) (pgd_val(pgd) & _PAGE_TABLE) -#define pgd_clear(pgdp) ({ pgd_val(*pgdp) = 0; }) -#define pgd_page(pgd) (mem_map + ((unsigned long)(__va(pgd_val(pgd)) - PAGE_OFFSET) >> PAGE_SHIFT)) +#define pud_none(pud) (!pud_val(pud)) +#define pud_bad(pud) ((pud_val(pud) & _DESCTYPE_MASK) != _PAGE_TABLE) +#define pud_present(pud) (pud_val(pud) & _PAGE_TABLE) +#define pud_clear(pudp) ({ pud_val(*pudp) = 0; }) +#define pud_page(pud) (mem_map + ((unsigned long)(__va(pud_val(pud)) - PAGE_OFFSET) >> PAGE_SHIFT)) #define pte_ERROR(e) \ printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) @@ -209,9 +209,9 @@ static inline pgd_t *pgd_offset_k(unsigned long address) /* Find an entry in the second-level page table.. */ -static inline pmd_t *pmd_offset(pgd_t *dir, unsigned long address) +static inline pmd_t *pmd_offset(pud_t *dir, unsigned long address) { - return (pmd_t *)__pgd_page(*dir) + ((address >> PMD_SHIFT) & (PTRS_PER_PMD-1)); + return (pmd_t *)pud_page_vaddr(*dir) + ((address >> PMD_SHIFT) & (PTRS_PER_PMD-1)); } /* Find an entry in the third-level page table.. */ @@ -239,11 +239,15 @@ static inline void nocache_page(void *vaddr) if (CPU_IS_040_OR_060) { pgd_t *dir; + p4d_t *p4dp; + pud_t *pudp; pmd_t *pmdp; pte_t *ptep; dir = pgd_offset_k(addr); - pmdp = pmd_offset(dir, addr); + p4dp = p4d_offset(dir, addr); + pudp = pud_offset(p4dp, addr); + pmdp = pmd_offset(pudp, addr); ptep = pte_offset_kernel(pmdp, addr); *ptep = pte_mknocache(*ptep); } @@ -255,11 +259,15 @@ static inline void cache_page(void *vaddr) if (CPU_IS_040_OR_060) { pgd_t *dir; + p4d_t *p4dp; + pud_t *pudp; pmd_t *pmdp; pte_t *ptep; dir = pgd_offset_k(addr); - pmdp = pmd_offset(dir, addr); + p4dp = p4d_offset(dir, addr); + pudp = pud_offset(p4dp, addr); + pmdp = pmd_offset(pudp, addr); ptep = pte_offset_kernel(pmdp, addr); *ptep = pte_mkcache(*ptep); } diff --git a/arch/m68k/include/asm/page.h b/arch/m68k/include/asm/page.h index 700d8195880c..05e1e1e77a9a 100644 --- a/arch/m68k/include/asm/page.h +++ b/arch/m68k/include/asm/page.h @@ -21,19 +21,22 @@ /* * These are used to make use of C type-checking.. */ -typedef struct { unsigned long pte; } pte_t; +#if !defined(CONFIG_MMU) || CONFIG_PGTABLE_LEVELS == 3 typedef struct { unsigned long pmd[16]; } pmd_t; +#define pmd_val(x) ((&x)->pmd[0]) +#define __pmd(x) ((pmd_t) { { (x) }, }) +#endif + +typedef struct { unsigned long pte; } pte_t; typedef struct { unsigned long pgd; } pgd_t; typedef struct { unsigned long pgprot; } pgprot_t; typedef struct page *pgtable_t; #define pte_val(x) ((x).pte) -#define pmd_val(x) ((&x)->pmd[0]) #define pgd_val(x) ((x).pgd) #define pgprot_val(x) ((x).pgprot) #define __pte(x) ((pte_t) { (x) } ) -#define __pmd(x) ((pmd_t) { { (x) }, }) #define __pgd(x) ((pgd_t) { (x) } ) #define __pgprot(x) ((pgprot_t) { (x) } ) diff --git a/arch/m68k/include/asm/pgtable_mm.h b/arch/m68k/include/asm/pgtable_mm.h index 646c174fff99..2bf5c3501e78 100644 --- a/arch/m68k/include/asm/pgtable_mm.h +++ b/arch/m68k/include/asm/pgtable_mm.h @@ -2,7 +2,12 @@ #ifndef _M68K_PGTABLE_H #define _M68K_PGTABLE_H -#include <asm-generic/4level-fixup.h> + +#if defined(CONFIG_SUN3) || defined(CONFIG_COLDFIRE) +#include <asm-generic/pgtable-nopmd.h> +#else +#include <asm-generic/pgtable-nopud.h> +#endif #include <asm/setup.h> @@ -30,9 +35,7 @@ /* PMD_SHIFT determines the size of the area a second-level page table can map */ -#ifdef CONFIG_SUN3 -#define PMD_SHIFT 17 -#else +#if CONFIG_PGTABLE_LEVELS == 3 #define PMD_SHIFT 22 #endif #define PMD_SIZE (1UL << PMD_SHIFT) diff --git a/arch/m68k/include/asm/pgtable_no.h b/arch/m68k/include/asm/pgtable_no.h index c18165b0d904..ccc4568299e5 100644 --- a/arch/m68k/include/asm/pgtable_no.h +++ b/arch/m68k/include/asm/pgtable_no.h @@ -2,7 +2,7 @@ #ifndef _M68KNOMMU_PGTABLE_H #define _M68KNOMMU_PGTABLE_H -#include <asm-generic/4level-fixup.h> +#include <asm-generic/pgtable-nopud.h> /* * (C) Copyright 2000-2002, Greg Ungerer <gerg@snapgear.com> diff --git a/arch/m68k/include/asm/sun3_pgalloc.h b/arch/m68k/include/asm/sun3_pgalloc.h index 856121122b91..11b95dadf7c0 100644 --- a/arch/m68k/include/asm/sun3_pgalloc.h +++ b/arch/m68k/include/asm/sun3_pgalloc.h @@ -17,8 +17,6 @@ extern const char bad_pmd_string[]; -#define pmd_alloc_one(mm,address) ({ BUG(); ((pmd_t *)2); }) - #define __pte_free_tlb(tlb,pte,addr) \ do { \ pgtable_pte_page_dtor(pte); \ @@ -41,7 +39,6 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t page * inside the pgd, so has no extra memory associated with it. */ #define pmd_free(mm, x) do { } while (0) -#define __pmd_free_tlb(tlb, x, addr) do { } while (0) static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) { @@ -58,6 +55,4 @@ static inline pgd_t * pgd_alloc(struct mm_struct *mm) return new_pgd; } -#define pgd_populate(mm, pmd, pte) BUG() - #endif /* SUN3_PGALLOC_H */ diff --git a/arch/m68k/include/asm/sun3_pgtable.h b/arch/m68k/include/asm/sun3_pgtable.h index c987d50866b4..bc4155264810 100644 --- a/arch/m68k/include/asm/sun3_pgtable.h +++ b/arch/m68k/include/asm/sun3_pgtable.h @@ -110,11 +110,6 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) #define pmd_set(pmdp,ptep) do {} while (0) -static inline void pgd_set(pgd_t *pgdp, pmd_t *pmdp) -{ - pgd_val(*pgdp) = virt_to_phys(pmdp); -} - #define __pte_page(pte) \ ((unsigned long) __va ((pte_val (pte) & SUN3_PAGE_PGNUM_MASK) << PAGE_SHIFT)) #define __pmd_page(pmd) \ @@ -145,16 +140,9 @@ static inline int pmd_present2 (pmd_t *pmd) { return pmd_val (*pmd) & SUN3_PMD_V #define pmd_present(pmd) (!pmd_none2(&(pmd))) static inline void pmd_clear (pmd_t *pmdp) { pmd_val (*pmdp) = 0; } -static inline int pgd_none (pgd_t pgd) { return 0; } -static inline int pgd_bad (pgd_t pgd) { return 0; } -static inline int pgd_present (pgd_t pgd) { return 1; } -static inline void pgd_clear (pgd_t *pgdp) {} - #define pte_ERROR(e) \ pr_err("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) -#define pmd_ERROR(e) \ - pr_err("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) #define pgd_ERROR(e) \ pr_err("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) @@ -194,12 +182,6 @@ extern pgd_t kernel_pg_dir[PTRS_PER_PGD]; /* Find an entry in a kernel pagetable directory. */ #define pgd_offset_k(address) pgd_offset(&init_mm, address) -/* Find an entry in the second-level pagetable. */ -static inline pmd_t *pmd_offset (pgd_t *pgd, unsigned long address) -{ - return (pmd_t *) pgd; -} - /* Find an entry in the third-level pagetable. */ #define pte_index(address) ((address >> PAGE_SHIFT) & (PTRS_PER_PTE-1)) #define pte_offset_kernel(pmd, address) ((pte_t *) __pmd_page(*pmd) + pte_index(address)) diff --git a/arch/m68k/kernel/dma.c b/arch/m68k/kernel/dma.c index 3fab684cc0db..871a0e11da34 100644 --- a/arch/m68k/kernel/dma.c +++ b/arch/m68k/kernel/dma.c @@ -61,8 +61,8 @@ void arch_dma_free(struct device *dev, size_t size, void *vaddr, #endif /* CONFIG_MMU && !CONFIG_COLDFIRE */ -void arch_sync_dma_for_device(struct device *dev, phys_addr_t handle, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_device(phys_addr_t handle, size_t size, + enum dma_data_direction dir) { switch (dir) { case DMA_BIDIRECTIONAL: diff --git a/arch/m68k/kernel/sys_m68k.c b/arch/m68k/kernel/sys_m68k.c index 6363ec83a290..18a4de7d5934 100644 --- a/arch/m68k/kernel/sys_m68k.c +++ b/arch/m68k/kernel/sys_m68k.c @@ -465,6 +465,8 @@ sys_atomic_cmpxchg_32(unsigned long newval, int oldval, int d3, int d4, int d5, for (;;) { struct mm_struct *mm = current->mm; pgd_t *pgd; + p4d_t *p4d; + pud_t *pud; pmd_t *pmd; pte_t *pte; spinlock_t *ptl; @@ -474,7 +476,13 @@ sys_atomic_cmpxchg_32(unsigned long newval, int oldval, int d3, int d4, int d5, pgd = pgd_offset(mm, (unsigned long)mem); if (!pgd_present(*pgd)) goto bad_access; - pmd = pmd_offset(pgd, (unsigned long)mem); + p4d = p4d_offset(pgd, (unsigned long)mem); + if (!p4d_present(*p4d)) + goto bad_access; + pud = pud_offset(p4d, (unsigned long)mem); + if (!pud_present(*pud)) + goto bad_access; + pmd = pmd_offset(pud, (unsigned long)mem); if (!pmd_present(*pmd)) goto bad_access; pte = pte_offset_map_lock(mm, pmd, (unsigned long)mem, &ptl); diff --git a/arch/m68k/mm/init.c b/arch/m68k/mm/init.c index 778cacb7d57b..27c453f4fffe 100644 --- a/arch/m68k/mm/init.c +++ b/arch/m68k/mm/init.c @@ -130,8 +130,10 @@ static inline void init_pointer_tables(void) /* insert pointer tables allocated so far into the tablelist */ init_pointer_table((unsigned long)kernel_pg_dir); for (i = 0; i < PTRS_PER_PGD; i++) { - if (pgd_present(kernel_pg_dir[i])) - init_pointer_table(__pgd_page(kernel_pg_dir[i])); + pud_t *pud = (pud_t *)(&kernel_pg_dir[i]); + + if (pud_present(*pud)) + init_pointer_table(pgd_page_vaddr(kernel_pg_dir[i])); } /* insert also pointer table that we used to unmap the zero page */ diff --git a/arch/m68k/mm/kmap.c b/arch/m68k/mm/kmap.c index 40a3b327da07..120030ad8dc4 100644 --- a/arch/m68k/mm/kmap.c +++ b/arch/m68k/mm/kmap.c @@ -54,6 +54,61 @@ static inline void free_io_area(void *addr) static struct vm_struct *iolist; +/* + * __free_io_area unmaps nearly everything, so be careful + * Currently it doesn't free pointer/page tables anymore but this + * wasn't used anyway and might be added later. + */ +static void __free_io_area(void *addr, unsigned long size) +{ + unsigned long virtaddr = (unsigned long)addr; + pgd_t *pgd_dir; + p4d_t *p4d_dir; + pud_t *pud_dir; + pmd_t *pmd_dir; + pte_t *pte_dir; + + while ((long)size > 0) { + pgd_dir = pgd_offset_k(virtaddr); + p4d_dir = p4d_offset(pgd_dir, virtaddr); + pud_dir = pud_offset(p4d_dir, virtaddr); + if (pud_bad(*pud_dir)) { + printk("iounmap: bad pud(%08lx)\n", pud_val(*pud_dir)); + pud_clear(pud_dir); + return; + } + pmd_dir = pmd_offset(pud_dir, virtaddr); + +#if CONFIG_PGTABLE_LEVELS == 3 + if (CPU_IS_020_OR_030) { + int pmd_off = (virtaddr/PTRTREESIZE) & 15; + int pmd_type = pmd_dir->pmd[pmd_off] & _DESCTYPE_MASK; + + if (pmd_type == _PAGE_PRESENT) { + pmd_dir->pmd[pmd_off] = 0; + virtaddr += PTRTREESIZE; + size -= PTRTREESIZE; + continue; + } else if (pmd_type == 0) + continue; + } +#endif + + if (pmd_bad(*pmd_dir)) { + printk("iounmap: bad pmd (%08lx)\n", pmd_val(*pmd_dir)); + pmd_clear(pmd_dir); + return; + } + pte_dir = pte_offset_kernel(pmd_dir, virtaddr); + + pte_val(*pte_dir) = 0; + virtaddr += PAGE_SIZE; + size -= PAGE_SIZE; + } + + flush_tlb_all(); +} + static struct vm_struct *get_io_area(unsigned long size) { unsigned long addr; @@ -90,7 +145,7 @@ static inline void free_io_area(void *addr) if (tmp->addr == addr) { *p = tmp->next; /* remove gap added in get_io_area() */ - __iounmap(tmp->addr, tmp->size - IO_SIZE); + __free_io_area(tmp->addr, tmp->size - IO_SIZE); kfree(tmp); return; } @@ -110,6 +165,8 @@ void __iomem *__ioremap(unsigned long physaddr, unsigned long size, int cachefla unsigned long virtaddr, retaddr; long offset; pgd_t *pgd_dir; + p4d_t *p4d_dir; + pud_t *pud_dir; pmd_t *pmd_dir; pte_t *pte_dir; @@ -196,18 +253,23 @@ void __iomem *__ioremap(unsigned long physaddr, unsigned long size, int cachefla printk ("\npa=%#lx va=%#lx ", physaddr, virtaddr); #endif pgd_dir = pgd_offset_k(virtaddr); - pmd_dir = pmd_alloc(&init_mm, pgd_dir, virtaddr); + p4d_dir = p4d_offset(pgd_dir, virtaddr); + pud_dir = pud_offset(p4d_dir, virtaddr); + pmd_dir = pmd_alloc(&init_mm, pud_dir, virtaddr); if (!pmd_dir) { printk("ioremap: no mem for pmd_dir\n"); return NULL; } +#if CONFIG_PGTABLE_LEVELS == 3 if (CPU_IS_020_OR_030) { pmd_dir->pmd[(virtaddr/PTRTREESIZE) & 15] = physaddr; physaddr += PTRTREESIZE; virtaddr += PTRTREESIZE; size -= PTRTREESIZE; - } else { + } else +#endif + { pte_dir = pte_alloc_kernel(pmd_dir, virtaddr); if (!pte_dir) { printk("ioremap: no mem for pte_dir\n"); @@ -250,55 +312,6 @@ void iounmap(void __iomem *addr) EXPORT_SYMBOL(iounmap); /* - * __iounmap unmaps nearly everything, so be careful - * Currently it doesn't free pointer/page tables anymore but this - * wasn't used anyway and might be added later. - */ -void __iounmap(void *addr, unsigned long size) -{ - unsigned long virtaddr = (unsigned long)addr; - pgd_t *pgd_dir; - pmd_t *pmd_dir; - pte_t *pte_dir; - - while ((long)size > 0) { - pgd_dir = pgd_offset_k(virtaddr); - if (pgd_bad(*pgd_dir)) { - printk("iounmap: bad pgd(%08lx)\n", pgd_val(*pgd_dir)); - pgd_clear(pgd_dir); - return; - } - pmd_dir = pmd_offset(pgd_dir, virtaddr); - - if (CPU_IS_020_OR_030) { - int pmd_off = (virtaddr/PTRTREESIZE) & 15; - int pmd_type = pmd_dir->pmd[pmd_off] & _DESCTYPE_MASK; - - if (pmd_type == _PAGE_PRESENT) { - pmd_dir->pmd[pmd_off] = 0; - virtaddr += PTRTREESIZE; - size -= PTRTREESIZE; - continue; - } else if (pmd_type == 0) - continue; - } - - if (pmd_bad(*pmd_dir)) { - printk("iounmap: bad pmd (%08lx)\n", pmd_val(*pmd_dir)); - pmd_clear(pmd_dir); - return; - } - pte_dir = pte_offset_kernel(pmd_dir, virtaddr); - - pte_val(*pte_dir) = 0; - virtaddr += PAGE_SIZE; - size -= PAGE_SIZE; - } - - flush_tlb_all(); -} - -/* * Set new cache mode for some kernel address space. * The caller must push data for that range itself, if such data may already * be in the cache. @@ -307,6 +320,8 @@ void kernel_set_cachemode(void *addr, unsigned long size, int cmode) { unsigned long virtaddr = (unsigned long)addr; pgd_t *pgd_dir; + p4d_t *p4d_dir; + pud_t *pud_dir; pmd_t *pmd_dir; pte_t *pte_dir; @@ -341,13 +356,16 @@ void kernel_set_cachemode(void *addr, unsigned long size, int cmode) while ((long)size > 0) { pgd_dir = pgd_offset_k(virtaddr); - if (pgd_bad(*pgd_dir)) { - printk("iocachemode: bad pgd(%08lx)\n", pgd_val(*pgd_dir)); - pgd_clear(pgd_dir); + p4d_dir = p4d_offset(pgd_dir, virtaddr); + pud_dir = pud_offset(p4d_dir, virtaddr); + if (pud_bad(*pud_dir)) { + printk("iocachemode: bad pud(%08lx)\n", pud_val(*pud_dir)); + pud_clear(pud_dir); return; } - pmd_dir = pmd_offset(pgd_dir, virtaddr); + pmd_dir = pmd_offset(pud_dir, virtaddr); +#if CONFIG_PGTABLE_LEVELS == 3 if (CPU_IS_020_OR_030) { int pmd_off = (virtaddr/PTRTREESIZE) & 15; @@ -359,6 +377,7 @@ void kernel_set_cachemode(void *addr, unsigned long size, int cmode) continue; } } +#endif if (pmd_bad(*pmd_dir)) { printk("iocachemode: bad pmd (%08lx)\n", pmd_val(*pmd_dir)); diff --git a/arch/m68k/mm/mcfmmu.c b/arch/m68k/mm/mcfmmu.c index 6cb1e41d58d0..0ea375607767 100644 --- a/arch/m68k/mm/mcfmmu.c +++ b/arch/m68k/mm/mcfmmu.c @@ -92,6 +92,8 @@ int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word) unsigned long flags, mmuar, mmutr; struct mm_struct *mm; pgd_t *pgd; + p4d_t *p4d; + pud_t *pud; pmd_t *pmd; pte_t *pte; int asid; @@ -113,7 +115,19 @@ int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word) return -1; } - pmd = pmd_offset(pgd, mmuar); + p4d = p4d_offset(pgd, mmuar); + if (p4d_none(*p4d)) { + local_irq_restore(flags); + return -1; + } + + pud = pud_offset(p4d, mmuar); + if (pud_none(*pud)) { + local_irq_restore(flags); + return -1; + } + + pmd = pmd_offset(pud, mmuar); if (pmd_none(*pmd)) { local_irq_restore(flags); return -1; diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c index 356601bf96d9..4857985b8080 100644 --- a/arch/m68k/mm/motorola.c +++ b/arch/m68k/mm/motorola.c @@ -82,9 +82,11 @@ static pmd_t * __init kernel_ptr_table(void) */ last = (unsigned long)kernel_pg_dir; for (i = 0; i < PTRS_PER_PGD; i++) { - if (!pgd_present(kernel_pg_dir[i])) + pud_t *pud = (pud_t *)(&kernel_pg_dir[i]); + + if (!pud_present(*pud)) continue; - pmd = __pgd_page(kernel_pg_dir[i]); + pmd = pgd_page_vaddr(kernel_pg_dir[i]); if (pmd > last) last = pmd; } @@ -118,6 +120,8 @@ static void __init map_node(int node) #define ROOTTREESIZE (32*1024*1024) unsigned long physaddr, virtaddr, size; pgd_t *pgd_dir; + p4d_t *p4d_dir; + pud_t *pud_dir; pmd_t *pmd_dir; pte_t *pte_dir; @@ -149,14 +153,16 @@ static void __init map_node(int node) continue; } } - if (!pgd_present(*pgd_dir)) { + p4d_dir = p4d_offset(pgd_dir, virtaddr); + pud_dir = pud_offset(p4d_dir, virtaddr); + if (!pud_present(*pud_dir)) { pmd_dir = kernel_ptr_table(); #ifdef DEBUG printk ("[new pointer %p]", pmd_dir); #endif - pgd_set(pgd_dir, pmd_dir); + pud_set(pud_dir, pmd_dir); } else - pmd_dir = pmd_offset(pgd_dir, virtaddr); + pmd_dir = pmd_offset(pud_dir, virtaddr); if (CPU_IS_020_OR_030) { if (virtaddr) { @@ -304,4 +310,3 @@ void __init paging_init(void) node_set_state(i, N_NORMAL_MEMORY); } } - diff --git a/arch/m68k/sun3x/dvma.c b/arch/m68k/sun3x/dvma.c index 89e630e66555..c4b8aa1d80f4 100644 --- a/arch/m68k/sun3x/dvma.c +++ b/arch/m68k/sun3x/dvma.c @@ -80,6 +80,8 @@ inline int dvma_map_cpu(unsigned long kaddr, unsigned long vaddr, int len) { pgd_t *pgd; + p4d_t *p4d; + pud_t *pud; unsigned long end; int ret = 0; @@ -90,12 +92,14 @@ inline int dvma_map_cpu(unsigned long kaddr, pr_debug("dvma: mapping kern %08lx to virt %08lx\n", kaddr, vaddr); pgd = pgd_offset_k(vaddr); + p4d = p4d_offset(pgd, vaddr); + pud = pud_offset(p4d, vaddr); do { pmd_t *pmd; unsigned long end2; - if((pmd = pmd_alloc(&init_mm, pgd, vaddr)) == NULL) { + if((pmd = pmd_alloc(&init_mm, pud, vaddr)) == NULL) { ret = -ENOMEM; goto out; } @@ -196,4 +200,3 @@ void dvma_unmap_iommu(unsigned long baddr, int len) } } - diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index c9c4be822456..5f46ebe7bfe3 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -4,7 +4,6 @@ config MICROBLAZE select ARCH_32BIT_OFF_T select ARCH_NO_SWAP select ARCH_HAS_BINFMT_FLAT if !MMU - select ARCH_HAS_DMA_COHERENT_TO_PFN if MMU select ARCH_HAS_DMA_PREP_COHERENT select ARCH_HAS_GCOV_PROFILE_ALL select ARCH_HAS_SYNC_DMA_FOR_CPU @@ -46,6 +45,7 @@ config MICROBLAZE select VIRT_TO_BUS select CPU_NO_EFFICIENT_FFS select MMU_GATHER_NO_RANGE if MMU + select SPARSE_IRQ # Endianness selection choice diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig index 654edfdc7867..b3b433db89d8 100644 --- a/arch/microblaze/configs/mmu_defconfig +++ b/arch/microblaze/configs/mmu_defconfig @@ -33,6 +33,8 @@ CONFIG_INET=y # CONFIG_IPV6 is not set CONFIG_BRIDGE=m CONFIG_PCI=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y @@ -73,6 +75,7 @@ CONFIG_UIO_PDRV_GENIRQ=y CONFIG_UIO_DMEM_GENIRQ=y CONFIG_EXT2_FS=y # CONFIG_DNOTIFY is not set +CONFIG_TMPFS=y CONFIG_CRAMFS=y CONFIG_ROMFS_FS=y CONFIG_NFS_FS=y diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h index 86c95b2a1ce1..d33c61737b8b 100644 --- a/arch/microblaze/include/asm/io.h +++ b/arch/microblaze/include/asm/io.h @@ -39,9 +39,6 @@ extern resource_size_t isa_mem_base; extern void iounmap(volatile void __iomem *addr); extern void __iomem *ioremap(phys_addr_t address, unsigned long size); -#define ioremap_nocache(addr, size) ioremap((addr), (size)) -#define ioremap_wc(addr, size) ioremap((addr), (size)) -#define ioremap_wt(addr, size) ioremap((addr), (size)) #endif /* CONFIG_MMU */ diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h index d785defeeed5..eac2fb4b3fb9 100644 --- a/arch/microblaze/include/asm/irq.h +++ b/arch/microblaze/include/asm/irq.h @@ -9,7 +9,6 @@ #ifndef _ASM_MICROBLAZE_IRQ_H #define _ASM_MICROBLAZE_IRQ_H -#define NR_IRQS (32 + 1) #include <asm-generic/irq.h> struct pt_regs; diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h index d506bb0893f9..f4b44b24b02e 100644 --- a/arch/microblaze/include/asm/page.h +++ b/arch/microblaze/include/asm/page.h @@ -90,7 +90,6 @@ typedef struct { unsigned long pte; } pte_t; typedef struct { unsigned long pgprot; } pgprot_t; /* FIXME this can depend on linux kernel version */ # ifdef CONFIG_MMU -typedef struct { unsigned long pmd; } pmd_t; typedef struct { unsigned long pgd; } pgd_t; # else /* CONFIG_MMU */ typedef struct { unsigned long ste[64]; } pmd_t; @@ -103,7 +102,6 @@ typedef struct { p4d_t pge[1]; } pgd_t; # define pgprot_val(x) ((x).pgprot) # ifdef CONFIG_MMU -# define pmd_val(x) ((x).pmd) # define pgd_val(x) ((x).pgd) # else /* CONFIG_MMU */ # define pmd_val(x) ((x).ste[0]) @@ -112,7 +110,6 @@ typedef struct { p4d_t pge[1]; } pgd_t; # endif /* CONFIG_MMU */ # define __pte(x) ((pte_t) { (x) }) -# define __pmd(x) ((pmd_t) { (x) }) # define __pgd(x) ((pgd_t) { (x) }) # define __pgprot(x) ((pgprot_t) { (x) }) diff --git a/arch/microblaze/include/asm/pgalloc.h b/arch/microblaze/include/asm/pgalloc.h index 7ecb05baa601..fcf1e23f2e0a 100644 --- a/arch/microblaze/include/asm/pgalloc.h +++ b/arch/microblaze/include/asm/pgalloc.h @@ -41,13 +41,6 @@ static inline void free_pgd(pgd_t *pgd) #define pmd_pgtable(pmd) pmd_page(pmd) -/* - * We don't have any real pmd's, and this code never triggers because - * the pgd will always be present.. - */ -#define pmd_alloc_one_fast(mm, address) ({ BUG(); ((pmd_t *)1); }) -#define pmd_alloc_one(mm, address) ({ BUG(); ((pmd_t *)2); }) - extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm); #define __pte_free_tlb(tlb, pte, addr) pte_free((tlb)->mm, (pte)) @@ -58,15 +51,6 @@ extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm); #define pmd_populate_kernel(mm, pmd, pte) \ (pmd_val(*(pmd)) = (unsigned long) (pte)) -/* - * We don't have any real pmd's, and this code never triggers because - * the pgd will always be present.. - */ -#define pmd_alloc_one(mm, address) ({ BUG(); ((pmd_t *)2); }) -#define pmd_free(mm, x) do { } while (0) -#define __pmd_free_tlb(tlb, x, addr) pmd_free((tlb)->mm, x) -#define pgd_populate(mm, pmd, pte) BUG() - #endif /* CONFIG_MMU */ #endif /* _ASM_MICROBLAZE_PGALLOC_H */ diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h index 954b69af451f..2def331f9e2c 100644 --- a/arch/microblaze/include/asm/pgtable.h +++ b/arch/microblaze/include/asm/pgtable.h @@ -59,9 +59,7 @@ extern int mem_init_done; #else /* CONFIG_MMU */ -#include <asm-generic/4level-fixup.h> - -#define __PAGETABLE_PMD_FOLDED 1 +#include <asm-generic/pgtable-nopmd.h> #ifdef __KERNEL__ #ifndef __ASSEMBLY__ @@ -138,13 +136,8 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; } * */ -/* PMD_SHIFT determines the size of the area mapped by the PTE pages */ -#define PMD_SHIFT (PAGE_SHIFT + PTE_SHIFT) -#define PMD_SIZE (1UL << PMD_SHIFT) -#define PMD_MASK (~(PMD_SIZE-1)) - /* PGDIR_SHIFT determines what a top-level page table entry can map */ -#define PGDIR_SHIFT PMD_SHIFT +#define PGDIR_SHIFT (PAGE_SHIFT + PTE_SHIFT) #define PGDIR_SIZE (1UL << PGDIR_SHIFT) #define PGDIR_MASK (~(PGDIR_SIZE-1)) @@ -165,9 +158,6 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; } #define pte_ERROR(e) \ printk(KERN_ERR "%s:%d: bad pte "PTE_FMT".\n", \ __FILE__, __LINE__, pte_val(e)) -#define pmd_ERROR(e) \ - printk(KERN_ERR "%s:%d: bad pmd %08lx.\n", \ - __FILE__, __LINE__, pmd_val(e)) #define pgd_ERROR(e) \ printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \ __FILE__, __LINE__, pgd_val(e)) @@ -314,18 +304,6 @@ extern unsigned long empty_zero_page[1024]; #ifndef __ASSEMBLY__ /* - * The "pgd_xxx()" functions here are trivial for a folded two-level - * setup: the pgd is never bad, and a pmd always exists (as it's folded - * into the pgd entry) - */ -static inline int pgd_none(pgd_t pgd) { return 0; } -static inline int pgd_bad(pgd_t pgd) { return 0; } -static inline int pgd_present(pgd_t pgd) { return 1; } -#define pgd_clear(xp) do { } while (0) -#define pgd_page(pgd) \ - ((unsigned long) __va(pgd_val(pgd) & PAGE_MASK)) - -/* * The following only work if pte_present() is true. * Undefined behaviour if not.. */ @@ -479,12 +457,6 @@ static inline void ptep_mkdirty(struct mm_struct *mm, #define pgd_index(address) ((address) >> PGDIR_SHIFT) #define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) -/* Find an entry in the second-level page table.. */ -static inline pmd_t *pmd_offset(pgd_t *dir, unsigned long address) -{ - return (pmd_t *) dir; -} - /* Find an entry in the third-level page table.. */ #define pte_index(address) \ (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) diff --git a/arch/microblaze/kernel/dma.c b/arch/microblaze/kernel/dma.c index a89c2d4ed5ff..d7bebd04247b 100644 --- a/arch/microblaze/kernel/dma.c +++ b/arch/microblaze/kernel/dma.c @@ -15,7 +15,7 @@ #include <linux/bug.h> #include <asm/cacheflush.h> -static void __dma_sync(struct device *dev, phys_addr_t paddr, size_t size, +static void __dma_sync(phys_addr_t paddr, size_t size, enum dma_data_direction direction) { switch (direction) { @@ -31,14 +31,14 @@ static void __dma_sync(struct device *dev, phys_addr_t paddr, size_t size, } } -void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_device(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { - __dma_sync(dev, paddr, size, dir); + __dma_sync(paddr, size, dir); } -void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { - __dma_sync(dev, paddr, size, dir); + __dma_sync(paddr, size, dir); } diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S index 4e1b567becd6..de7083bd1d24 100644 --- a/arch/microblaze/kernel/entry.S +++ b/arch/microblaze/kernel/entry.S @@ -738,14 +738,9 @@ no_intr_resched: andi r5, r5, _TIF_NEED_RESCHED; beqi r5, restore /* if zero jump over */ -preempt: /* interrupts are off that's why I am calling preempt_chedule_irq */ bralid r15, preempt_schedule_irq nop - lwi r11, CURRENT_TASK, TS_THREAD_INFO; /* get thread info */ - lwi r5, r11, TI_FLAGS; /* get flags in thread info */ - andi r5, r5, _TIF_NEED_RESCHED; - bnei r5, preempt /* if non zero jump to resched */ restore: #endif VM_OFF /* MS: turn off MMU */ diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S index f264fdcf152a..7d2894418691 100644 --- a/arch/microblaze/kernel/head.S +++ b/arch/microblaze/kernel/head.S @@ -99,7 +99,7 @@ big_endian: _prepare_copy_fdt: or r11, r0, r0 /* incremment */ ori r4, r0, TOPHYS(_fdt_start) - ori r3, r0, (0x8000 - 4) + ori r3, r0, (0x10000 - 4) _copy_fdt: lw r12, r7, r11 /* r12 = r7 + r11 */ sw r12, r4, r11 /* addr[r4 + r11] = r12 */ diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c index cdd4feb279c5..c9125c328949 100644 --- a/arch/microblaze/kernel/signal.c +++ b/arch/microblaze/kernel/signal.c @@ -160,6 +160,9 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set, int err = 0, sig = ksig->sig; unsigned long address = 0; #ifdef CONFIG_MMU + pgd_t *pgdp; + p4d_t *p4dp; + pud_t *pudp; pmd_t *pmdp; pte_t *ptep; #endif @@ -195,9 +198,10 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set, address = ((unsigned long)frame->tramp); #ifdef CONFIG_MMU - pmdp = pmd_offset(pud_offset( - pgd_offset(current->mm, address), - address), address); + pgdp = pgd_offset(current->mm, address); + p4dp = p4d_offset(pgdp, address); + pudp = pud_offset(p4dp, address); + pmdp = pmd_offset(pudp, address); preempt_disable(); ptep = pte_offset_map(pmdp, address); diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S index 760cac41cbfe..2c09fa3a8a01 100644 --- a/arch/microblaze/kernel/vmlinux.lds.S +++ b/arch/microblaze/kernel/vmlinux.lds.S @@ -48,7 +48,7 @@ SECTIONS { __fdt_blob : AT(ADDR(__fdt_blob) - LOAD_OFFSET) { _fdt_start = . ; /* place for fdt blob */ *(__fdt_blob) ; /* Any link-placed DTB */ - . = _fdt_start + 0x8000; /* Pad up to 32kbyte */ + . = _fdt_start + 0x10000; /* Pad up to 64kbyte */ _fdt_end = . ; } diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c index a015a951c8b7..050fc621c920 100644 --- a/arch/microblaze/mm/init.c +++ b/arch/microblaze/mm/init.c @@ -53,8 +53,11 @@ EXPORT_SYMBOL(kmap_prot); static inline pte_t *virt_to_kpte(unsigned long vaddr) { - return pte_offset_kernel(pmd_offset(pgd_offset_k(vaddr), - vaddr), vaddr); + pgd_t *pgd = pgd_offset_k(vaddr); + p4d_t *p4d = p4d_offset(pgd, vaddr); + pud_t *pud = pud_offset(p4d, vaddr); + + return pte_offset_kernel(pmd_offset(pud, vaddr), vaddr); } static void __init highmem_init(void) diff --git a/arch/microblaze/mm/pgtable.c b/arch/microblaze/mm/pgtable.c index 010bb9cee2e4..68c26cacd930 100644 --- a/arch/microblaze/mm/pgtable.c +++ b/arch/microblaze/mm/pgtable.c @@ -134,11 +134,16 @@ EXPORT_SYMBOL(iounmap); int map_page(unsigned long va, phys_addr_t pa, int flags) { + p4d_t *p4d; + pud_t *pud; pmd_t *pd; pte_t *pg; int err = -ENOMEM; + /* Use upper 10 bits of VA to index the first level map */ - pd = pmd_offset(pgd_offset_k(va), va); + p4d = p4d_offset(pgd_offset_k(va), va); + pud = pud_offset(p4d, va); + pd = pmd_offset(pud, va); /* Use middle 10 bits of VA to index the second-level map */ pg = pte_alloc_kernel(pd, va); /* from powerpc - pgtable.c */ /* pg = pte_alloc_kernel(&init_mm, pd, va); */ @@ -188,13 +193,17 @@ void __init mapin_ram(void) static int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep) { pgd_t *pgd; + p4d_t *p4d; + pud_t *pud; pmd_t *pmd; pte_t *pte; int retval = 0; pgd = pgd_offset(mm, addr & PAGE_MASK); if (pgd) { - pmd = pmd_offset(pgd, addr & PAGE_MASK); + p4d = p4d_offset(pgd, addr & PAGE_MASK); + pud = pud_offset(p4d, addr & PAGE_MASK); + pmd = pmd_offset(pud, addr & PAGE_MASK); if (pmd_present(*pmd)) { pte = pte_offset_kernel(pmd, addr & PAGE_MASK); if (pte) { diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index c86be02b6d89..add388236f4e 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -74,6 +74,7 @@ config MIPS select HAVE_PERF_EVENTS select HAVE_REGS_AND_STACK_ACCESS_API select HAVE_RSEQ + select HAVE_SPARSE_SYSCALL_NR select HAVE_STACKPROTECTOR select HAVE_SYSCALL_TRACEPOINTS select HAVE_VIRT_CPU_ACCOUNTING_GEN if 64BIT || !SMP @@ -1193,9 +1194,9 @@ config DMA_NONCOHERENT select ARCH_HAS_DMA_WRITE_COMBINE select ARCH_HAS_SYNC_DMA_FOR_DEVICE select ARCH_HAS_UNCACHED_SEGMENT - select NEED_DMA_MAP_STATE - select ARCH_HAS_DMA_COHERENT_TO_PFN + select DMA_NONCOHERENT_MMAP select DMA_NONCOHERENT_CACHE_SYNC + select NEED_DMA_MAP_STATE config SYS_HAS_EARLY_PRINTK bool diff --git a/arch/mips/bmips/dma.c b/arch/mips/bmips/dma.c index 3d13c77c125f..df56bf4179e3 100644 --- a/arch/mips/bmips/dma.c +++ b/arch/mips/bmips/dma.c @@ -64,7 +64,7 @@ phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr) return dma_addr; } -void arch_sync_dma_for_cpu_all(struct device *dev) +void arch_sync_dma_for_cpu_all(void) { void __iomem *cbr = BMIPS_GET_CBR(); u32 cfg; diff --git a/arch/mips/configs/ci20_defconfig b/arch/mips/configs/ci20_defconfig index cb4aa23a2bf4..be41df2a81fb 100644 --- a/arch/mips/configs/ci20_defconfig +++ b/arch/mips/configs/ci20_defconfig @@ -17,7 +17,6 @@ CONFIG_CGROUP_CPUACCT=y CONFIG_NAMESPACES=y CONFIG_USER_NS=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y # CONFIG_VM_EVENT_COUNTERS is not set diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig index c16a2330e84d..360c6b2d397a 100644 --- a/arch/mips/configs/loongson3_defconfig +++ b/arch/mips/configs/loongson3_defconfig @@ -20,7 +20,6 @@ CONFIG_SCHED_AUTOGROUP=y CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y -CONFIG_SYSCTL_SYSCALL=y CONFIG_EMBEDDED=y CONFIG_MACH_LOONGSON64=y CONFIG_SMP=y diff --git a/arch/mips/configs/malta_qemu_32r6_defconfig b/arch/mips/configs/malta_qemu_32r6_defconfig index e6c600dc1814..614af02d83e6 100644 --- a/arch/mips/configs/malta_qemu_32r6_defconfig +++ b/arch/mips/configs/malta_qemu_32r6_defconfig @@ -5,7 +5,6 @@ CONFIG_NO_HZ=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=15 -CONFIG_SYSCTL_SYSCALL=y CONFIG_EMBEDDED=y CONFIG_SLAB=y CONFIG_MIPS_MALTA=y diff --git a/arch/mips/configs/maltaaprp_defconfig b/arch/mips/configs/maltaaprp_defconfig index 82b44b774553..9c051f8fd330 100644 --- a/arch/mips/configs/maltaaprp_defconfig +++ b/arch/mips/configs/maltaaprp_defconfig @@ -5,7 +5,6 @@ CONFIG_AUDIT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=15 -CONFIG_SYSCTL_SYSCALL=y CONFIG_EMBEDDED=y CONFIG_SLAB=y CONFIG_MIPS_MALTA=y diff --git a/arch/mips/configs/maltasmvp_defconfig b/arch/mips/configs/maltasmvp_defconfig index 4190fc6189a0..2e90d97551d6 100644 --- a/arch/mips/configs/maltasmvp_defconfig +++ b/arch/mips/configs/maltasmvp_defconfig @@ -5,7 +5,6 @@ CONFIG_NO_HZ=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=15 -CONFIG_SYSCTL_SYSCALL=y CONFIG_EMBEDDED=y CONFIG_SLAB=y CONFIG_MIPS_MALTA=y diff --git a/arch/mips/configs/maltasmvp_eva_defconfig b/arch/mips/configs/maltasmvp_eva_defconfig index a13c10e910ec..d1f7fdb27284 100644 --- a/arch/mips/configs/maltasmvp_eva_defconfig +++ b/arch/mips/configs/maltasmvp_eva_defconfig @@ -5,7 +5,6 @@ CONFIG_NO_HZ=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=15 -CONFIG_SYSCTL_SYSCALL=y CONFIG_EMBEDDED=y CONFIG_SLAB=y CONFIG_MIPS_MALTA=y diff --git a/arch/mips/configs/maltaup_defconfig b/arch/mips/configs/maltaup_defconfig index b35f1fc690fb..48e5bd492452 100644 --- a/arch/mips/configs/maltaup_defconfig +++ b/arch/mips/configs/maltaup_defconfig @@ -6,7 +6,6 @@ CONFIG_NO_HZ=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=15 -CONFIG_SYSCTL_SYSCALL=y CONFIG_EMBEDDED=y CONFIG_SLAB=y CONFIG_MIPS_MALTA=y diff --git a/arch/mips/configs/omega2p_defconfig b/arch/mips/configs/omega2p_defconfig index a39426e57e91..fc39ddf610a9 100644 --- a/arch/mips/configs/omega2p_defconfig +++ b/arch/mips/configs/omega2p_defconfig @@ -16,7 +16,6 @@ CONFIG_CGROUP_CPUACCT=y CONFIG_NAMESPACES=y CONFIG_USER_NS=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y # CONFIG_VM_EVENT_COUNTERS is not set diff --git a/arch/mips/configs/qi_lb60_defconfig b/arch/mips/configs/qi_lb60_defconfig index d3f4d5248d9f..97c9a69d1528 100644 --- a/arch/mips/configs/qi_lb60_defconfig +++ b/arch/mips/configs/qi_lb60_defconfig @@ -2,7 +2,6 @@ CONFIG_SYSVIPC=y # CONFIG_CROSS_MEMORY_ATTACH is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y # CONFIG_VM_EVENT_COUNTERS is not set diff --git a/arch/mips/configs/vocore2_defconfig b/arch/mips/configs/vocore2_defconfig index 523b944fd527..a14f8ea5c386 100644 --- a/arch/mips/configs/vocore2_defconfig +++ b/arch/mips/configs/vocore2_defconfig @@ -16,7 +16,6 @@ CONFIG_CGROUP_CPUACCT=y CONFIG_NAMESPACES=y CONFIG_USER_NS=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y # CONFIG_VM_EVENT_COUNTERS is not set diff --git a/arch/mips/crypto/chacha-glue.c b/arch/mips/crypto/chacha-glue.c index 779e399c9bef..d1fd23e6ef84 100644 --- a/arch/mips/crypto/chacha-glue.c +++ b/arch/mips/crypto/chacha-glue.c @@ -128,12 +128,14 @@ static struct skcipher_alg algs[] = { static int __init chacha_simd_mod_init(void) { - return crypto_register_skciphers(algs, ARRAY_SIZE(algs)); + return IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER) ? + crypto_register_skciphers(algs, ARRAY_SIZE(algs)) : 0; } static void __exit chacha_simd_mod_fini(void) { - crypto_unregister_skciphers(algs, ARRAY_SIZE(algs)); + if (IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER)) + crypto_unregister_skciphers(algs, ARRAY_SIZE(algs)); } module_init(chacha_simd_mod_init); diff --git a/arch/mips/crypto/poly1305-glue.c b/arch/mips/crypto/poly1305-glue.c index b759b6ccc361..b37d29cf5d0a 100644 --- a/arch/mips/crypto/poly1305-glue.c +++ b/arch/mips/crypto/poly1305-glue.c @@ -187,12 +187,14 @@ static struct shash_alg mips_poly1305_alg = { static int __init mips_poly1305_mod_init(void) { - return crypto_register_shash(&mips_poly1305_alg); + return IS_REACHABLE(CONFIG_CRYPTO_HASH) ? + crypto_register_shash(&mips_poly1305_alg) : 0; } static void __exit mips_poly1305_mod_exit(void) { - crypto_unregister_shash(&mips_poly1305_alg); + if (IS_REACHABLE(CONFIG_CRYPTO_HASH)) + crypto_unregister_shash(&mips_poly1305_alg); } module_init(mips_poly1305_mod_init); diff --git a/arch/mips/include/asm/Kbuild b/arch/mips/include/asm/Kbuild index c8b595c60910..61b0fc2026e6 100644 --- a/arch/mips/include/asm/Kbuild +++ b/arch/mips/include/asm/Kbuild @@ -13,7 +13,6 @@ generic-y += irq_work.h generic-y += local64.h generic-y += mcs_spinlock.h generic-y += mm-arch-hooks.h -generic-y += msi.h generic-y += parport.h generic-y += percpu.h generic-y += preempt.h diff --git a/arch/mips/include/asm/dma-direct.h b/arch/mips/include/asm/dma-direct.h index b5c240806e1b..14e352651ce9 100644 --- a/arch/mips/include/asm/dma-direct.h +++ b/arch/mips/include/asm/dma-direct.h @@ -2,14 +2,6 @@ #ifndef _MIPS_DMA_DIRECT_H #define _MIPS_DMA_DIRECT_H 1 -static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size) -{ - if (!dev->dma_mask) - return false; - - return addr + size - 1 <= *dev->dma_mask; -} - dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr); phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr); diff --git a/arch/mips/include/uapi/asm/msgbuf.h b/arch/mips/include/uapi/asm/msgbuf.h index 46aa15b13e4e..128af72f2dfe 100644 --- a/arch/mips/include/uapi/asm/msgbuf.h +++ b/arch/mips/include/uapi/asm/msgbuf.h @@ -2,6 +2,7 @@ #ifndef _ASM_MSGBUF_H #define _ASM_MSGBUF_H +#include <asm/ipcbuf.h> /* * The msqid64_ds structure for the MIPS architecture. @@ -15,9 +16,9 @@ #if defined(__mips64) struct msqid64_ds { struct ipc64_perm msg_perm; - __kernel_time_t msg_stime; /* last msgsnd time */ - __kernel_time_t msg_rtime; /* last msgrcv time */ - __kernel_time_t msg_ctime; /* last change time */ + long msg_stime; /* last msgsnd time */ + long msg_rtime; /* last msgrcv time */ + long msg_ctime; /* last change time */ unsigned long msg_cbytes; /* current number of bytes on queue */ unsigned long msg_qnum; /* number of messages in queue */ unsigned long msg_qbytes; /* max number of bytes on queue */ diff --git a/arch/mips/include/uapi/asm/sembuf.h b/arch/mips/include/uapi/asm/sembuf.h index 60c89e6cb25b..ba7fe0c89e7d 100644 --- a/arch/mips/include/uapi/asm/sembuf.h +++ b/arch/mips/include/uapi/asm/sembuf.h @@ -2,6 +2,8 @@ #ifndef _ASM_SEMBUF_H #define _ASM_SEMBUF_H +#include <asm/ipcbuf.h> + /* * The semid64_ds structure for the MIPS architecture. * Note extra padding because this structure is passed back and forth @@ -14,8 +16,8 @@ #ifdef __mips64 struct semid64_ds { struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - __kernel_time_t sem_ctime; /* last change time */ + long sem_otime; /* last semop time */ + long sem_ctime; /* last change time */ unsigned long sem_nsems; /* no. of semaphores in array */ unsigned long __unused1; unsigned long __unused2; diff --git a/arch/mips/include/uapi/asm/shmbuf.h b/arch/mips/include/uapi/asm/shmbuf.h index 9b9bba3401f2..680bb95b2240 100644 --- a/arch/mips/include/uapi/asm/shmbuf.h +++ b/arch/mips/include/uapi/asm/shmbuf.h @@ -17,9 +17,9 @@ struct shmid64_ds { struct ipc64_perm shm_perm; /* operation perms */ size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - __kernel_time_t shm_dtime; /* last detach time */ - __kernel_time_t shm_ctime; /* last change time */ + long shm_atime; /* last attach time */ + long shm_dtime; /* last detach time */ + long shm_ctime; /* last change time */ __kernel_pid_t shm_cpid; /* pid of creator */ __kernel_pid_t shm_lpid; /* pid of last operator */ unsigned long shm_nattch; /* no. of current attaches */ diff --git a/arch/mips/include/uapi/asm/stat.h b/arch/mips/include/uapi/asm/stat.h index 95416f366d7f..3d2a3b71845c 100644 --- a/arch/mips/include/uapi/asm/stat.h +++ b/arch/mips/include/uapi/asm/stat.h @@ -26,17 +26,17 @@ struct stat { gid_t st_gid; unsigned st_rdev; long st_pad2[2]; - off_t st_size; + long st_size; long st_pad3; /* * Actually this should be timestruc_t st_atime, st_mtime and st_ctime * but we don't have it under Linux. */ - time_t st_atime; + long st_atime; long st_atime_nsec; - time_t st_mtime; + long st_mtime; long st_mtime_nsec; - time_t st_ctime; + long st_ctime; long st_ctime_nsec; long st_blksize; long st_blocks; @@ -70,13 +70,13 @@ struct stat64 { * Actually this should be timestruc_t st_atime, st_mtime and st_ctime * but we don't have it under Linux. */ - time_t st_atime; + long st_atime; unsigned long st_atime_nsec; /* Reserved for st_atime expansion */ - time_t st_mtime; + long st_mtime; unsigned long st_mtime_nsec; /* Reserved for st_mtime expansion */ - time_t st_ctime; + long st_ctime; unsigned long st_ctime_nsec; /* Reserved for st_ctime expansion */ unsigned long st_blksize; @@ -105,7 +105,7 @@ struct stat { unsigned int st_rdev; unsigned int st_pad1[3]; /* Reserved for st_rdev expansion */ - off_t st_size; + long st_size; /* * Actually this should be timestruc_t st_atime, st_mtime and st_ctime diff --git a/arch/mips/jazz/jazzdma.c b/arch/mips/jazz/jazzdma.c index a01e14955187..c64a297e82b3 100644 --- a/arch/mips/jazz/jazzdma.c +++ b/arch/mips/jazz/jazzdma.c @@ -592,7 +592,7 @@ static dma_addr_t jazz_dma_map_page(struct device *dev, struct page *page, phys_addr_t phys = page_to_phys(page) + offset; if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC)) - arch_sync_dma_for_device(dev, phys, size, dir); + arch_sync_dma_for_device(phys, size, dir); return vdma_alloc(phys, size); } @@ -600,7 +600,7 @@ static void jazz_dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size, enum dma_data_direction dir, unsigned long attrs) { if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC)) - arch_sync_dma_for_cpu(dev, vdma_log2phys(dma_addr), size, dir); + arch_sync_dma_for_cpu(vdma_log2phys(dma_addr), size, dir); vdma_free(dma_addr); } @@ -612,7 +612,7 @@ static int jazz_dma_map_sg(struct device *dev, struct scatterlist *sglist, for_each_sg(sglist, sg, nents, i) { if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC)) - arch_sync_dma_for_device(dev, sg_phys(sg), sg->length, + arch_sync_dma_for_device(sg_phys(sg), sg->length, dir); sg->dma_address = vdma_alloc(sg_phys(sg), sg->length); if (sg->dma_address == DMA_MAPPING_ERROR) @@ -631,8 +631,7 @@ static void jazz_dma_unmap_sg(struct device *dev, struct scatterlist *sglist, for_each_sg(sglist, sg, nents, i) { if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC)) - arch_sync_dma_for_cpu(dev, sg_phys(sg), sg->length, - dir); + arch_sync_dma_for_cpu(sg_phys(sg), sg->length, dir); vdma_free(sg->dma_address); } } @@ -640,13 +639,13 @@ static void jazz_dma_unmap_sg(struct device *dev, struct scatterlist *sglist, static void jazz_dma_sync_single_for_device(struct device *dev, dma_addr_t addr, size_t size, enum dma_data_direction dir) { - arch_sync_dma_for_device(dev, vdma_log2phys(addr), size, dir); + arch_sync_dma_for_device(vdma_log2phys(addr), size, dir); } static void jazz_dma_sync_single_for_cpu(struct device *dev, dma_addr_t addr, size_t size, enum dma_data_direction dir) { - arch_sync_dma_for_cpu(dev, vdma_log2phys(addr), size, dir); + arch_sync_dma_for_cpu(vdma_log2phys(addr), size, dir); } static void jazz_dma_sync_sg_for_device(struct device *dev, @@ -656,7 +655,7 @@ static void jazz_dma_sync_sg_for_device(struct device *dev, int i; for_each_sg(sgl, sg, nents, i) - arch_sync_dma_for_device(dev, sg_phys(sg), sg->length, dir); + arch_sync_dma_for_device(sg_phys(sg), sg->length, dir); } static void jazz_dma_sync_sg_for_cpu(struct device *dev, @@ -666,7 +665,7 @@ static void jazz_dma_sync_sg_for_cpu(struct device *dev, int i; for_each_sg(sgl, sg, nents, i) - arch_sync_dma_for_cpu(dev, sg_phys(sg), sg->length, dir); + arch_sync_dma_for_cpu(sg_phys(sg), sg->length, dir); } const struct dma_map_ops jazz_dma_ops = { diff --git a/arch/mips/kernel/binfmt_elfn32.c b/arch/mips/kernel/binfmt_elfn32.c index 7a12763d553a..6ee3f7218c67 100644 --- a/arch/mips/kernel/binfmt_elfn32.c +++ b/arch/mips/kernel/binfmt_elfn32.c @@ -100,7 +100,7 @@ jiffies_to_old_timeval32(unsigned long jiffies, struct old_timeval32 *value) #undef TASK_SIZE #define TASK_SIZE TASK_SIZE32 -#undef ns_to_timeval -#define ns_to_timeval ns_to_old_timeval32 +#undef ns_to_kernel_old_timeval +#define ns_to_kernel_old_timeval ns_to_old_timeval32 #include "../../../fs/binfmt_elf.c" diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c index e6db06a1d31a..6dd103d3cebb 100644 --- a/arch/mips/kernel/binfmt_elfo32.c +++ b/arch/mips/kernel/binfmt_elfo32.c @@ -103,7 +103,7 @@ jiffies_to_old_timeval32(unsigned long jiffies, struct old_timeval32 *value) #undef TASK_SIZE #define TASK_SIZE TASK_SIZE32 -#undef ns_to_timeval -#define ns_to_timeval ns_to_old_timeval32 +#undef ns_to_kernel_old_timeval +#define ns_to_kernel_old_timeval ns_to_old_timeval32 #include "../../../fs/binfmt_elf.c" diff --git a/arch/mips/mm/dma-noncoherent.c b/arch/mips/mm/dma-noncoherent.c index 1d4d57dd9acf..dc42ffc83825 100644 --- a/arch/mips/mm/dma-noncoherent.c +++ b/arch/mips/mm/dma-noncoherent.c @@ -27,7 +27,7 @@ * R10000 and R12000 are used in such systems, the SGI IP28 Indigo² rsp. * SGI IP32 aka O2. */ -static inline bool cpu_needs_post_dma_flush(struct device *dev) +static inline bool cpu_needs_post_dma_flush(void) { switch (boot_cpu_type()) { case CPU_R10000: @@ -59,12 +59,6 @@ void *cached_kernel_address(void *addr) return __va(addr) - UNCAC_BASE; } -long arch_dma_coherent_to_pfn(struct device *dev, void *cpu_addr, - dma_addr_t dma_addr) -{ - return page_to_pfn(virt_to_page(cached_kernel_address(cpu_addr))); -} - static inline void dma_sync_virt(void *addr, size_t size, enum dma_data_direction dir) { @@ -118,17 +112,17 @@ static inline void dma_sync_phys(phys_addr_t paddr, size_t size, } while (left); } -void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_device(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { dma_sync_phys(paddr, size, dir); } #ifdef CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU -void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { - if (cpu_needs_post_dma_flush(dev)) + if (cpu_needs_post_dma_flush()) dma_sync_phys(paddr, size, dir); } #endif diff --git a/arch/mips/pci/fixup-sb1250.c b/arch/mips/pci/fixup-sb1250.c index 8a41b359cf90..40efc990cdce 100644 --- a/arch/mips/pci/fixup-sb1250.c +++ b/arch/mips/pci/fixup-sb1250.c @@ -21,22 +21,22 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIBYTE, PCI_DEVICE_ID_BCM1250_PCI, /* * The BCM1250, etc. PCI host bridge does not support DAC on its 32-bit - * bus, so we set the bus's DMA mask accordingly. However the HT link + * bus, so we set the bus's DMA limit accordingly. However the HT link * down the artificial PCI-HT bridge supports 40-bit addressing and the * SP1011 HT-PCI bridge downstream supports both DAC and a 64-bit bus * width, so we record the PCI-HT bridge's secondary and subordinate bus - * numbers and do not set the mask for devices present in the inclusive + * numbers and do not set the limit for devices present in the inclusive * range of those. */ -struct sb1250_bus_dma_mask_exclude { +struct sb1250_bus_dma_limit_exclude { bool set; unsigned char start; unsigned char end; }; -static int sb1250_bus_dma_mask(struct pci_dev *dev, void *data) +static int sb1250_bus_dma_limit(struct pci_dev *dev, void *data) { - struct sb1250_bus_dma_mask_exclude *exclude = data; + struct sb1250_bus_dma_limit_exclude *exclude = data; bool exclude_this; bool ht_bridge; @@ -55,7 +55,7 @@ static int sb1250_bus_dma_mask(struct pci_dev *dev, void *data) exclude->start, exclude->end); } else { dev_dbg(&dev->dev, "disabling DAC for device"); - dev->dev.bus_dma_mask = DMA_BIT_MASK(32); + dev->dev.bus_dma_limit = DMA_BIT_MASK(32); } return 0; @@ -63,9 +63,9 @@ static int sb1250_bus_dma_mask(struct pci_dev *dev, void *data) static void quirk_sb1250_pci_dac(struct pci_dev *dev) { - struct sb1250_bus_dma_mask_exclude exclude = { .set = false }; + struct sb1250_bus_dma_limit_exclude exclude = { .set = false }; - pci_walk_bus(dev->bus, sb1250_bus_dma_mask, &exclude); + pci_walk_bus(dev->bus, sb1250_bus_dma_limit, &exclude); } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SIBYTE, PCI_DEVICE_ID_BCM1250_PCI, quirk_sb1250_pci_dac); diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig index 1434fa60f3db..94e9ce994494 100644 --- a/arch/mips/ralink/Kconfig +++ b/arch/mips/ralink/Kconfig @@ -51,6 +51,7 @@ choice select MIPS_GIC select COMMON_CLK select CLKSRC_MIPS_GIC + select HAVE_PCI if PCI_MT7621 endchoice choice diff --git a/arch/mips/sgi-ip32/ip32-platform.c b/arch/mips/sgi-ip32/ip32-platform.c index 5a2a82148d8d..c3909bd8dd1a 100644 --- a/arch/mips/sgi-ip32/ip32-platform.c +++ b/arch/mips/sgi-ip32/ip32-platform.c @@ -115,7 +115,7 @@ ip32_rtc_platform_data[] = { .bcd_mode = true, .no_irq = false, .uie_unsupported = false, - .alloc_io_resources = true, + .access_type = ds1685_reg_direct, .plat_prepare_poweroff = ip32_prepare_poweroff, }, }; diff --git a/arch/nds32/Kconfig b/arch/nds32/Kconfig index fbd68329737f..12c06a833b7c 100644 --- a/arch/nds32/Kconfig +++ b/arch/nds32/Kconfig @@ -20,6 +20,7 @@ config NDS32 select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select GENERIC_IRQ_SHOW + select GENERIC_IOREMAP select GENERIC_LIB_ASHLDI3 select GENERIC_LIB_ASHRDI3 select GENERIC_LIB_CMPDI2 diff --git a/arch/nds32/Kconfig.cpu b/arch/nds32/Kconfig.cpu index f80a4ab63da2..f88a12fdf0f3 100644 --- a/arch/nds32/Kconfig.cpu +++ b/arch/nds32/Kconfig.cpu @@ -13,7 +13,7 @@ config FPU default n help If FPU ISA is used in user space, this configuration shall be Y to - enable required support in kerenl such as fpu context switch and + enable required support in kernel such as fpu context switch and fpu exception handler. If no FPU ISA is used in user space, say N. @@ -27,7 +27,7 @@ config LAZY_FPU enhance system performance by reducing the context switch frequency of the FPU register. - For nomal case, say Y. + For normal case, say Y. config SUPPORT_DENORMAL_ARITHMETIC bool "Denormal arithmetic support" @@ -36,7 +36,7 @@ config SUPPORT_DENORMAL_ARITHMETIC help Say Y here to enable arithmetic of denormalized number. Enabling this feature can enhance the precision for tininess number. - However, performance loss in float pointe calculations is + However, performance loss in float point calculations is possibly significant due to additional FPU exception. If the calculated tolerance for tininess number is not critical, @@ -73,7 +73,7 @@ choice the cache aliasing issue. The rest cpus(N13, N10 and D10) are implemented as VIPT data cache. It may cause the cache aliasing issue if its cache way size is larger than page size. You can specify the - CPU type direcly or choose CPU_V3 if unsure. + CPU type directly or choose CPU_V3 if unsure. A kernel built for N10 is able to run on N15, D15, N13, N10 or D10. A kernel built for N15 is able to run on N15 or D15. diff --git a/arch/nds32/boot/dts/Makefile b/arch/nds32/boot/dts/Makefile index fff8ade7a84f..f84bd529b6fd 100644 --- a/arch/nds32/boot/dts/Makefile +++ b/arch/nds32/boot/dts/Makefile @@ -5,5 +5,3 @@ else BUILTIN_DTB := endif obj-$(CONFIG_OF) += $(BUILTIN_DTB) - -clean-files := *.dtb *.dtb.S diff --git a/arch/nds32/include/asm/io.h b/arch/nds32/include/asm/io.h index 16f262322b8f..e57378d04006 100644 --- a/arch/nds32/include/asm/io.h +++ b/arch/nds32/include/asm/io.h @@ -6,7 +6,6 @@ #include <linux/types.h> -extern void iounmap(volatile void __iomem *addr); #define __raw_writeb __raw_writeb static inline void __raw_writeb(u8 val, volatile void __iomem *addr) { @@ -79,5 +78,7 @@ static inline u32 __raw_readl(const volatile void __iomem *addr) #define writeb(v,c) ({ __iowmb(); writeb_relaxed((v),(c)); }) #define writew(v,c) ({ __iowmb(); writew_relaxed((v),(c)); }) #define writel(v,c) ({ __iowmb(); writel_relaxed((v),(c)); }) + #include <asm-generic/io.h> + #endif /* __ASM_NDS32_IO_H */ diff --git a/arch/nds32/include/asm/page.h b/arch/nds32/include/asm/page.h index 8feb1fa12f01..86b32014c5f9 100644 --- a/arch/nds32/include/asm/page.h +++ b/arch/nds32/include/asm/page.h @@ -41,17 +41,14 @@ void clear_page(void *page); void copy_page(void *to, void *from); typedef unsigned long pte_t; -typedef unsigned long pmd_t; typedef unsigned long pgd_t; typedef unsigned long pgprot_t; #define pte_val(x) (x) -#define pmd_val(x) (x) #define pgd_val(x) (x) #define pgprot_val(x) (x) #define __pte(x) (x) -#define __pmd(x) (x) #define __pgd(x) (x) #define __pgprot(x) (x) diff --git a/arch/nds32/include/asm/pgalloc.h b/arch/nds32/include/asm/pgalloc.h index 37125e6884d7..85c117347c86 100644 --- a/arch/nds32/include/asm/pgalloc.h +++ b/arch/nds32/include/asm/pgalloc.h @@ -15,9 +15,6 @@ /* * Since we have only two-level page tables, these are trivial */ -#define pmd_alloc_one(mm, addr) ({ BUG(); ((pmd_t *)2); }) -#define pmd_free(mm, pmd) do { } while (0) -#define pgd_populate(mm, pmd, pte) BUG() #define pmd_pgtable(pmd) pmd_page(pmd) extern pgd_t *pgd_alloc(struct mm_struct *mm); diff --git a/arch/nds32/include/asm/pgtable.h b/arch/nds32/include/asm/pgtable.h index 0588ec99725c..0214e4150539 100644 --- a/arch/nds32/include/asm/pgtable.h +++ b/arch/nds32/include/asm/pgtable.h @@ -4,41 +4,33 @@ #ifndef _ASMNDS32_PGTABLE_H #define _ASMNDS32_PGTABLE_H -#define __PAGETABLE_PMD_FOLDED 1 -#include <asm-generic/4level-fixup.h> +#include <asm-generic/pgtable-nopmd.h> #include <linux/sizes.h> #include <asm/memory.h> #include <asm/nds32.h> #ifndef __ASSEMBLY__ #include <asm/fixmap.h> -#include <asm/io.h> #include <nds32_intrinsic.h> #endif #ifdef CONFIG_ANDES_PAGE_SIZE_4KB #define PGDIR_SHIFT 22 #define PTRS_PER_PGD 1024 -#define PMD_SHIFT 22 -#define PTRS_PER_PMD 1 #define PTRS_PER_PTE 1024 #endif #ifdef CONFIG_ANDES_PAGE_SIZE_8KB #define PGDIR_SHIFT 24 #define PTRS_PER_PGD 256 -#define PMD_SHIFT 24 -#define PTRS_PER_PMD 1 #define PTRS_PER_PTE 2048 #endif #ifndef __ASSEMBLY__ extern void __pte_error(const char *file, int line, unsigned long val); -extern void __pmd_error(const char *file, int line, unsigned long val); extern void __pgd_error(const char *file, int line, unsigned long val); #define pte_ERROR(pte) __pte_error(__FILE__, __LINE__, pte_val(pte)) -#define pmd_ERROR(pmd) __pmd_error(__FILE__, __LINE__, pmd_val(pmd)) #define pgd_ERROR(pgd) __pgd_error(__FILE__, __LINE__, pgd_val(pgd)) #endif /* !__ASSEMBLY__ */ @@ -130,6 +122,9 @@ extern void __pgd_error(const char *file, int line, unsigned long val); #define _PAGE_CACHE _PAGE_C_MEM_WB #endif +#define _PAGE_IOREMAP \ + (_PAGE_V | _PAGE_M_KRW | _PAGE_D | _PAGE_G | _PAGE_C_DEV) + /* * + Level 1 descriptor (PMD) */ @@ -366,9 +361,6 @@ static inline pmd_t __mk_pmd(pte_t * ptep, unsigned long prot) /* to find an entry in a kernel page-table-directory */ #define pgd_offset_k(addr) pgd_offset(&init_mm, addr) -/* Find an entry in the second-level page table.. */ -#define pmd_offset(dir, addr) ((pmd_t *)(dir)) - static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) { const unsigned long mask = 0xfff; diff --git a/arch/nds32/include/asm/tlb.h b/arch/nds32/include/asm/tlb.h index a8aff1c8b4f4..672603804a3b 100644 --- a/arch/nds32/include/asm/tlb.h +++ b/arch/nds32/include/asm/tlb.h @@ -7,6 +7,5 @@ #include <asm-generic/tlb.h> #define __pte_free_tlb(tlb, pte, addr) pte_free((tlb)->mm, pte) -#define __pmd_free_tlb(tlb, pmd, addr) pmd_free((tln)->mm, pmd) #endif diff --git a/arch/nds32/kernel/dma.c b/arch/nds32/kernel/dma.c index 4206d4b6c8ce..69d762182d49 100644 --- a/arch/nds32/kernel/dma.c +++ b/arch/nds32/kernel/dma.c @@ -46,8 +46,8 @@ static inline void cache_op(phys_addr_t paddr, size_t size, } while (left); } -void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_device(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { switch (dir) { case DMA_FROM_DEVICE: @@ -61,8 +61,8 @@ void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr, } } -void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { switch (dir) { case DMA_TO_DEVICE: diff --git a/arch/nds32/kernel/perf_event_cpu.c b/arch/nds32/kernel/perf_event_cpu.c index 334c2a6cec23..0ce6f9f307e6 100644 --- a/arch/nds32/kernel/perf_event_cpu.c +++ b/arch/nds32/kernel/perf_event_cpu.c @@ -1119,7 +1119,7 @@ static void cpu_pmu_init(struct nds32_pmu *cpu_pmu) on_each_cpu(cpu_pmu->reset, cpu_pmu, 1); } -const static struct of_device_id cpu_pmu_of_device_ids[] = { +static const struct of_device_id cpu_pmu_of_device_ids[] = { {.compatible = "andestech,nds32v3-pmu", .data = device_pmu_init}, {}, diff --git a/arch/nds32/kernel/pm.c b/arch/nds32/kernel/pm.c index ffa8040d8be7..e25700e125d8 100644 --- a/arch/nds32/kernel/pm.c +++ b/arch/nds32/kernel/pm.c @@ -14,6 +14,7 @@ unsigned int *phy_addr_sp_tmp; static void nds32_suspend2ram(void) { pgd_t *pgdv; + p4d_t *p4dv; pud_t *pudv; pmd_t *pmdv; pte_t *ptev; @@ -21,7 +22,8 @@ static void nds32_suspend2ram(void) pgdv = (pgd_t *)__va((__nds32__mfsr(NDS32_SR_L1_PPTB) & L1_PPTB_mskBASE)) + pgd_index((unsigned int)cpu_resume); - pudv = pud_offset(pgdv, (unsigned int)cpu_resume); + p4dv = p4d_offset(pgdv, (unsigned int)cpu_resume); + pudv = pud_offset(p4dv, (unsigned int)cpu_resume); pmdv = pmd_offset(pudv, (unsigned int)cpu_resume); ptev = pte_offset_map(pmdv, (unsigned int)cpu_resume); diff --git a/arch/nds32/kernel/vdso/gettimeofday.c b/arch/nds32/kernel/vdso/gettimeofday.c index b02581891c33..9ec03cf0ec54 100644 --- a/arch/nds32/kernel/vdso/gettimeofday.c +++ b/arch/nds32/kernel/vdso/gettimeofday.c @@ -48,9 +48,9 @@ static notrace int vdso_read_retry(const struct vdso_data *vdata, u32 start) } static notrace long clock_gettime_fallback(clockid_t _clkid, - struct timespec *_ts) + struct __kernel_old_timespec *_ts) { - register struct timespec *ts asm("$r1") = _ts; + register struct __kernel_old_timespec *ts asm("$r1") = _ts; register clockid_t clkid asm("$r0") = _clkid; register long ret asm("$r0"); @@ -63,7 +63,7 @@ static notrace long clock_gettime_fallback(clockid_t _clkid, return ret; } -static notrace int do_realtime_coarse(struct timespec *ts, +static notrace int do_realtime_coarse(struct __kernel_old_timespec *ts, struct vdso_data *vdata) { u32 seq; @@ -78,25 +78,23 @@ static notrace int do_realtime_coarse(struct timespec *ts, return 0; } -static notrace int do_monotonic_coarse(struct timespec *ts, +static notrace int do_monotonic_coarse(struct __kernel_old_timespec *ts, struct vdso_data *vdata) { - struct timespec tomono; u32 seq; + u64 ns; do { seq = vdso_read_begin(vdata); - ts->tv_sec = vdata->xtime_coarse_sec; - ts->tv_nsec = vdata->xtime_coarse_nsec; - - tomono.tv_sec = vdata->wtm_clock_sec; - tomono.tv_nsec = vdata->wtm_clock_nsec; + ts->tv_sec = vdata->xtime_coarse_sec + vdata->wtm_clock_sec; + ns = vdata->xtime_coarse_nsec + vdata->wtm_clock_nsec; } while (vdso_read_retry(vdata, seq)); - ts->tv_sec += tomono.tv_sec; - timespec_add_ns(ts, tomono.tv_nsec); + ts->tv_sec += __iter_div_u64_rem(ns, NSEC_PER_SEC, &ns); + ts->tv_nsec = ns; + return 0; } @@ -115,7 +113,7 @@ static notrace inline u64 vgetsns(struct vdso_data *vdso) return ((u64) cycle_delta & vdso->cs_mask) * vdso->cs_mult; } -static notrace int do_realtime(struct timespec *ts, struct vdso_data *vdata) +static notrace int do_realtime(struct __kernel_old_timespec *ts, struct vdso_data *vdata) { unsigned count; u64 ns; @@ -133,32 +131,31 @@ static notrace int do_realtime(struct timespec *ts, struct vdso_data *vdata) return 0; } -static notrace int do_monotonic(struct timespec *ts, struct vdso_data *vdata) +static notrace int do_monotonic(struct __kernel_old_timespec *ts, struct vdso_data *vdata) { - struct timespec tomono; - u64 nsecs; + u64 ns; u32 seq; do { seq = vdso_read_begin(vdata); ts->tv_sec = vdata->xtime_clock_sec; - nsecs = vdata->xtime_clock_nsec; - nsecs += vgetsns(vdata); - nsecs >>= vdata->cs_shift; + ns = vdata->xtime_clock_nsec; + ns += vgetsns(vdata); + ns >>= vdata->cs_shift; - tomono.tv_sec = vdata->wtm_clock_sec; - tomono.tv_nsec = vdata->wtm_clock_nsec; + ts->tv_sec += vdata->wtm_clock_sec; + ns += vdata->wtm_clock_nsec; } while (vdso_read_retry(vdata, seq)); - ts->tv_sec += tomono.tv_sec; - ts->tv_nsec = 0; - timespec_add_ns(ts, nsecs + tomono.tv_nsec); + ts->tv_sec += __iter_div_u64_rem(ns, NSEC_PER_SEC, &ns); + ts->tv_nsec = ns; + return 0; } -notrace int __vdso_clock_gettime(clockid_t clkid, struct timespec *ts) +notrace int __vdso_clock_gettime(clockid_t clkid, struct __kernel_old_timespec *ts) { struct vdso_data *vdata; int ret = -1; @@ -191,10 +188,10 @@ notrace int __vdso_clock_gettime(clockid_t clkid, struct timespec *ts) } static notrace int clock_getres_fallback(clockid_t _clk_id, - struct timespec *_res) + struct __kernel_old_timespec *_res) { register clockid_t clk_id asm("$r0") = _clk_id; - register struct timespec *res asm("$r1") = _res; + register struct __kernel_old_timespec *res asm("$r1") = _res; register int ret asm("$r0"); asm volatile ("movi $r15, %3\n" @@ -206,7 +203,7 @@ static notrace int clock_getres_fallback(clockid_t _clk_id, return ret; } -notrace int __vdso_clock_getres(clockid_t clk_id, struct timespec *res) +notrace int __vdso_clock_getres(clockid_t clk_id, struct __kernel_old_timespec *res) { struct vdso_data *vdata = __get_datapage(); @@ -230,10 +227,10 @@ notrace int __vdso_clock_getres(clockid_t clk_id, struct timespec *res) return 0; } -static notrace inline int gettimeofday_fallback(struct timeval *_tv, +static notrace inline int gettimeofday_fallback(struct __kernel_old_timeval *_tv, struct timezone *_tz) { - register struct timeval *tv asm("$r0") = _tv; + register struct __kernel_old_timeval *tv asm("$r0") = _tv; register struct timezone *tz asm("$r1") = _tz; register int ret asm("$r0"); @@ -246,9 +243,9 @@ static notrace inline int gettimeofday_fallback(struct timeval *_tv, return ret; } -notrace int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz) +notrace int __vdso_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz) { - struct timespec ts; + struct __kernel_old_timespec ts; struct vdso_data *vdata; int ret; diff --git a/arch/nds32/mm/Makefile b/arch/nds32/mm/Makefile index bd360e4583b5..897ecaf5cf54 100644 --- a/arch/nds32/mm/Makefile +++ b/arch/nds32/mm/Makefile @@ -1,6 +1,5 @@ # SPDX-License-Identifier: GPL-2.0-only -obj-y := extable.o tlb.o \ - fault.o init.o ioremap.o mmap.o \ +obj-y := extable.o tlb.o fault.o init.o mmap.o \ mm-nds32.o cacheflush.o proc.o obj-$(CONFIG_ALIGNMENT_TRAP) += alignment.o diff --git a/arch/nds32/mm/fault.c b/arch/nds32/mm/fault.c index 064ae5d2159d..906dfb25353c 100644 --- a/arch/nds32/mm/fault.c +++ b/arch/nds32/mm/fault.c @@ -31,6 +31,8 @@ void show_pte(struct mm_struct *mm, unsigned long addr) pr_alert("[%08lx] *pgd=%08lx", addr, pgd_val(*pgd)); do { + p4d_t *p4d; + pud_t *pud; pmd_t *pmd; if (pgd_none(*pgd)) @@ -41,7 +43,9 @@ void show_pte(struct mm_struct *mm, unsigned long addr) break; } - pmd = pmd_offset(pgd, addr); + p4d = p4d_offset(pgd, addr); + pud = pud_offset(p4d, addr); + pmd = pmd_offset(pud, addr); #if PTRS_PER_PMD != 1 pr_alert(", *pmd=%08lx", pmd_val(*pmd)); #endif @@ -359,6 +363,7 @@ vmalloc_fault: unsigned int index = pgd_index(addr); pgd_t *pgd, *pgd_k; + p4d_t *p4d, *p4d_k; pud_t *pud, *pud_k; pmd_t *pmd, *pmd_k; pte_t *pte_k; @@ -369,8 +374,13 @@ vmalloc_fault: if (!pgd_present(*pgd_k)) goto no_context; - pud = pud_offset(pgd, addr); - pud_k = pud_offset(pgd_k, addr); + p4d = p4d_offset(pgd, addr); + p4d_k = p4d_offset(pgd_k, addr); + if (!p4d_present(*p4d_k)) + goto no_context; + + pud = pud_offset(p4d, addr); + pud_k = pud_offset(p4d_k, addr); if (!pud_present(*pud_k)) goto no_context; diff --git a/arch/nds32/mm/init.c b/arch/nds32/mm/init.c index 55703b03d172..0be3833f6814 100644 --- a/arch/nds32/mm/init.c +++ b/arch/nds32/mm/init.c @@ -54,6 +54,7 @@ static void __init map_ram(void) { unsigned long v, p, e; pgd_t *pge; + p4d_t *p4e; pud_t *pue; pmd_t *pme; pte_t *pte; @@ -69,7 +70,8 @@ static void __init map_ram(void) while (p < e) { int j; - pue = pud_offset(pge, v); + p4e = p4d_offset(pge, v); + pue = pud_offset(p4e, v); pme = pmd_offset(pue, v); if ((u32) pue != (u32) pge || (u32) pme != (u32) pge) { @@ -100,6 +102,7 @@ static void __init fixedrange_init(void) { unsigned long vaddr; pgd_t *pgd; + p4d_t *p4d; pud_t *pud; pmd_t *pmd; #ifdef CONFIG_HIGHMEM @@ -111,7 +114,8 @@ static void __init fixedrange_init(void) */ vaddr = __fix_to_virt(__end_of_fixed_addresses - 1); pgd = swapper_pg_dir + pgd_index(vaddr); - pud = pud_offset(pgd, vaddr); + p4d = p4d_offset(pgd, vaddr); + pud = pud_offset(p4d, vaddr); pmd = pmd_offset(pud, vaddr); fixmap_pmd_p = memblock_alloc(PAGE_SIZE, PAGE_SIZE); if (!fixmap_pmd_p) @@ -126,7 +130,8 @@ static void __init fixedrange_init(void) vaddr = PKMAP_BASE; pgd = swapper_pg_dir + pgd_index(vaddr); - pud = pud_offset(pgd, vaddr); + p4d = p4d_offset(pgd, vaddr); + pud = pud_offset(p4d, vaddr); pmd = pmd_offset(pud, vaddr); pte = memblock_alloc(PAGE_SIZE, PAGE_SIZE); if (!pte) diff --git a/arch/nds32/mm/ioremap.c b/arch/nds32/mm/ioremap.c deleted file mode 100644 index 690140bb23a2..000000000000 --- a/arch/nds32/mm/ioremap.c +++ /dev/null @@ -1,62 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// Copyright (C) 2005-2017 Andes Technology Corporation - -#include <linux/vmalloc.h> -#include <linux/io.h> -#include <linux/mm.h> -#include <asm/pgtable.h> - -void __iomem *ioremap(phys_addr_t phys_addr, size_t size); - -static void __iomem *__ioremap_caller(phys_addr_t phys_addr, size_t size, - void *caller) -{ - struct vm_struct *area; - unsigned long addr, offset, last_addr; - pgprot_t prot; - - /* Don't allow wraparound or zero size */ - last_addr = phys_addr + size - 1; - if (!size || last_addr < phys_addr) - return NULL; - - /* - * Mappings have to be page-aligned - */ - offset = phys_addr & ~PAGE_MASK; - phys_addr &= PAGE_MASK; - size = PAGE_ALIGN(last_addr + 1) - phys_addr; - - /* - * Ok, go for it.. - */ - area = get_vm_area_caller(size, VM_IOREMAP, caller); - if (!area) - return NULL; - - area->phys_addr = phys_addr; - addr = (unsigned long)area->addr; - prot = __pgprot(_PAGE_V | _PAGE_M_KRW | _PAGE_D | - _PAGE_G | _PAGE_C_DEV); - if (ioremap_page_range(addr, addr + size, phys_addr, prot)) { - vunmap((void *)addr); - return NULL; - } - return (__force void __iomem *)(offset + (char *)addr); - -} - -void __iomem *ioremap(phys_addr_t phys_addr, size_t size) -{ - return __ioremap_caller(phys_addr, size, - __builtin_return_address(0)); -} - -EXPORT_SYMBOL(ioremap); - -void iounmap(volatile void __iomem * addr) -{ - vunmap((void *)(PAGE_MASK & (unsigned long)addr)); -} - -EXPORT_SYMBOL(iounmap); diff --git a/arch/nds32/mm/mm-nds32.c b/arch/nds32/mm/mm-nds32.c index 3b43798d754f..8503bee882d1 100644 --- a/arch/nds32/mm/mm-nds32.c +++ b/arch/nds32/mm/mm-nds32.c @@ -74,6 +74,8 @@ void setup_mm_for_reboot(char mode) { unsigned long pmdval; pgd_t *pgd; + p4d_t *p4d; + pud_t *pud; pmd_t *pmd; int i; @@ -84,7 +86,9 @@ void setup_mm_for_reboot(char mode) for (i = 0; i < USER_PTRS_PER_PGD; i++) { pmdval = (i << PGDIR_SHIFT); - pmd = pmd_offset(pgd + i, i << PGDIR_SHIFT); + p4d = p4d_offset(pgd, i << PGDIR_SHIFT); + pud = pud_offset(p4d, i << PGDIR_SHIFT); + pmd = pmd_offset(pud + i, i << PGDIR_SHIFT); set_pmd(pmd, __pmd(pmdval)); } } diff --git a/arch/nds32/mm/proc.c b/arch/nds32/mm/proc.c index ba80992d13a2..837ae7728830 100644 --- a/arch/nds32/mm/proc.c +++ b/arch/nds32/mm/proc.c @@ -16,10 +16,14 @@ extern struct cache_info L1_cache_info[2]; int va_kernel_present(unsigned long addr) { + p4d_t *p4d; + pud_t *pud; pmd_t *pmd; pte_t *ptep, pte; - pmd = pmd_offset(pgd_offset_k(addr), addr); + p4d = p4d_offset(pgd_offset_k(addr), addr); + pud = pud_offset(p4d, addr); + pmd = pmd_offset(pud, addr); if (!pmd_none(*pmd)) { ptep = pte_offset_map(pmd, addr); pte = *ptep; @@ -32,20 +36,24 @@ int va_kernel_present(unsigned long addr) pte_t va_present(struct mm_struct * mm, unsigned long addr) { pgd_t *pgd; + p4d_t *p4d; pud_t *pud; pmd_t *pmd; pte_t *ptep, pte; pgd = pgd_offset(mm, addr); if (!pgd_none(*pgd)) { - pud = pud_offset(pgd, addr); - if (!pud_none(*pud)) { - pmd = pmd_offset(pud, addr); - if (!pmd_none(*pmd)) { - ptep = pte_offset_map(pmd, addr); - pte = *ptep; - if (pte_present(pte)) - return pte; + p4d = p4d_offset(pgd, addr); + if (!p4d_none(*p4d)) { + pud = pud_offset(p4d, addr); + if (!pud_none(*pud)) { + pmd = pmd_offset(pud, addr); + if (!pmd_none(*pmd)) { + ptep = pte_offset_map(pmd, addr); + pte = *ptep; + if (pte_present(pte)) + return pte; + } } } } diff --git a/arch/nios2/configs/10m50_defconfig b/arch/nios2/configs/10m50_defconfig index 1137ef2ed3b0..a7967b4cfb6e 100644 --- a/arch/nios2/configs/10m50_defconfig +++ b/arch/nios2/configs/10m50_defconfig @@ -2,7 +2,6 @@ CONFIG_SYSVIPC=y CONFIG_NO_HZ_IDLE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSCTL_SYSCALL=y # CONFIG_ELF_CORE is not set # CONFIG_EPOLL is not set # CONFIG_SIGNALFD is not set diff --git a/arch/nios2/configs/3c120_defconfig b/arch/nios2/configs/3c120_defconfig index a0f160ba7598..423a0c40a162 100644 --- a/arch/nios2/configs/3c120_defconfig +++ b/arch/nios2/configs/3c120_defconfig @@ -2,7 +2,6 @@ CONFIG_SYSVIPC=y CONFIG_NO_HZ_IDLE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSCTL_SYSCALL=y # CONFIG_ELF_CORE is not set # CONFIG_EPOLL is not set # CONFIG_SIGNALFD is not set diff --git a/arch/nios2/include/asm/io.h b/arch/nios2/include/asm/io.h index 9010243077ab..746853ac7d8d 100644 --- a/arch/nios2/include/asm/io.h +++ b/arch/nios2/include/asm/io.h @@ -25,29 +25,8 @@ #define writew_relaxed(x, addr) writew(x, addr) #define writel_relaxed(x, addr) writel(x, addr) -extern void __iomem *__ioremap(unsigned long physaddr, unsigned long size, - unsigned long cacheflag); -extern void __iounmap(void __iomem *addr); - -static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size) -{ - return __ioremap(physaddr, size, 0); -} - -static inline void __iomem *ioremap_nocache(unsigned long physaddr, - unsigned long size) -{ - return __ioremap(physaddr, size, 0); -} - -static inline void iounmap(void __iomem *addr) -{ - __iounmap(addr); -} - -#define ioremap_nocache ioremap_nocache -#define ioremap_wc ioremap_nocache -#define ioremap_wt ioremap_nocache +void __iomem *ioremap(unsigned long physaddr, unsigned long size); +void iounmap(void __iomem *addr); /* Pages to physical address... */ #define page_to_phys(page) virt_to_phys(page_to_virt(page)) diff --git a/arch/nios2/mm/dma-mapping.c b/arch/nios2/mm/dma-mapping.c index 9cb238664584..0ed711e37902 100644 --- a/arch/nios2/mm/dma-mapping.c +++ b/arch/nios2/mm/dma-mapping.c @@ -18,8 +18,8 @@ #include <linux/cache.h> #include <asm/cacheflush.h> -void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_device(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { void *vaddr = phys_to_virt(paddr); @@ -42,8 +42,8 @@ void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr, } } -void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { void *vaddr = phys_to_virt(paddr); diff --git a/arch/nios2/mm/ioremap.c b/arch/nios2/mm/ioremap.c index 3a28177a01eb..b56af759dcdf 100644 --- a/arch/nios2/mm/ioremap.c +++ b/arch/nios2/mm/ioremap.c @@ -112,8 +112,7 @@ static int remap_area_pages(unsigned long address, unsigned long phys_addr, /* * Map some physical address range into the kernel address space. */ -void __iomem *__ioremap(unsigned long phys_addr, unsigned long size, - unsigned long cacheflag) +void __iomem *ioremap(unsigned long phys_addr, unsigned long size) { struct vm_struct *area; unsigned long offset; @@ -139,15 +138,6 @@ void __iomem *__ioremap(unsigned long phys_addr, unsigned long size, return NULL; } - /* - * Map uncached objects in the low part of address space to - * CONFIG_NIOS2_IO_REGION_BASE - */ - if (IS_MAPPABLE_UNCACHEABLE(phys_addr) && - IS_MAPPABLE_UNCACHEABLE(last_addr) && - !(cacheflag & _PAGE_CACHED)) - return (void __iomem *)(CONFIG_NIOS2_IO_REGION_BASE + phys_addr); - /* Mappings have to be page-aligned */ offset = phys_addr & ~PAGE_MASK; phys_addr &= PAGE_MASK; @@ -158,21 +148,20 @@ void __iomem *__ioremap(unsigned long phys_addr, unsigned long size, if (!area) return NULL; addr = area->addr; - if (remap_area_pages((unsigned long) addr, phys_addr, size, - cacheflag)) { + if (remap_area_pages((unsigned long) addr, phys_addr, size, 0)) { vunmap(addr); return NULL; } return (void __iomem *) (offset + (char *)addr); } -EXPORT_SYMBOL(__ioremap); +EXPORT_SYMBOL(ioremap); /* - * __iounmap unmaps nearly everything, so be careful + * iounmap unmaps nearly everything, so be careful * it doesn't free currently pointer/page tables anymore but it * wasn't used anyway and might be added later. */ -void __iounmap(void __iomem *addr) +void iounmap(void __iomem *addr) { struct vm_struct *p; @@ -184,4 +173,4 @@ void __iounmap(void __iomem *addr) pr_err("iounmap: bad address %p\n", addr); kfree(p); } -EXPORT_SYMBOL(__iounmap); +EXPORT_SYMBOL(iounmap); diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig index bf326f0edd2f..1928e061ff96 100644 --- a/arch/openrisc/Kconfig +++ b/arch/openrisc/Kconfig @@ -13,7 +13,7 @@ config OPENRISC select IRQ_DOMAIN select HANDLE_DOMAIN_IRQ select GPIOLIB - select HAVE_ARCH_TRACEHOOK + select HAVE_ARCH_TRACEHOOK select SPARSE_IRQ select GENERIC_IRQ_CHIP select GENERIC_IRQ_PROBE @@ -51,12 +51,12 @@ config NO_IOPORT_MAP def_bool y config TRACE_IRQFLAGS_SUPPORT - def_bool y + def_bool y # For now, use generic checksum functions #These can be reimplemented in assembly later if so inclined config GENERIC_CSUM - def_bool y + def_bool y config STACKTRACE_SUPPORT def_bool y @@ -89,8 +89,8 @@ config DCACHE_WRITETHROUGH If unsure say N here config OPENRISC_BUILTIN_DTB - string "Builtin DTB" - default "" + string "Builtin DTB" + default "" menu "Class II Instructions" @@ -161,13 +161,13 @@ config OPENRISC_HAVE_SHADOW_GPRS On a unicore system it's safe to say N here if you are unsure. config CMDLINE - string "Default kernel command string" - default "" - help - On some architectures there is currently no way for the boot loader - to pass arguments to the kernel. For these architectures, you should - supply some command-line options at build time by entering them - here. + string "Default kernel command string" + default "" + help + On some architectures there is currently no way for the boot loader + to pass arguments to the kernel. For these architectures, you should + supply some command-line options at build time by entering them + here. menu "Debugging options" @@ -185,7 +185,7 @@ config OPENRISC_ESR_EXCEPTION_BUG_CHECK default n help This option enables some checks that might expose some problems - in kernel. + in kernel. Say N if you are unsure. diff --git a/arch/openrisc/include/asm/io.h b/arch/openrisc/include/asm/io.h index 5b81a96ab85e..e18f038b2a6d 100644 --- a/arch/openrisc/include/asm/io.h +++ b/arch/openrisc/include/asm/io.h @@ -25,7 +25,6 @@ #define PIO_OFFSET 0 #define PIO_MASK 0 -#define ioremap_nocache ioremap #include <asm-generic/io.h> #include <asm/pgtable.h> diff --git a/arch/openrisc/kernel/dma.c b/arch/openrisc/kernel/dma.c index 4d5b8bd1d795..adec711ad39d 100644 --- a/arch/openrisc/kernel/dma.c +++ b/arch/openrisc/kernel/dma.c @@ -125,7 +125,7 @@ arch_dma_free(struct device *dev, size_t size, void *vaddr, free_pages_exact(vaddr, size); } -void arch_sync_dma_for_device(struct device *dev, phys_addr_t addr, size_t size, +void arch_sync_dma_for_device(phys_addr_t addr, size_t size, enum dma_data_direction dir) { unsigned long cl; diff --git a/arch/parisc/configs/c8000_defconfig b/arch/parisc/configs/c8000_defconfig index 507f0644fcf8..db864b18962a 100644 --- a/arch/parisc/configs/c8000_defconfig +++ b/arch/parisc/configs/c8000_defconfig @@ -9,7 +9,6 @@ CONFIG_IKCONFIG_PROC=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y -CONFIG_SYSCTL_SYSCALL=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y diff --git a/arch/parisc/configs/generic-32bit_defconfig b/arch/parisc/configs/generic-32bit_defconfig index 18b072a47a10..c7a5726728a4 100644 --- a/arch/parisc/configs/generic-32bit_defconfig +++ b/arch/parisc/configs/generic-32bit_defconfig @@ -8,7 +8,6 @@ CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y -CONFIG_SYSCTL_SYSCALL=y CONFIG_PERF_EVENTS=y CONFIG_SLAB=y CONFIG_MODULES=y diff --git a/arch/parisc/include/asm/checksum.h b/arch/parisc/include/asm/checksum.h index 3cbf1f1c1188..c1c22819a04d 100644 --- a/arch/parisc/include/asm/checksum.h +++ b/arch/parisc/include/asm/checksum.h @@ -42,31 +42,32 @@ extern __wsum csum_partial_copy_from_user(const void __user *src, static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) { unsigned int sum; + unsigned long t0, t1, t2; __asm__ __volatile__ ( " ldws,ma 4(%1), %0\n" " addib,<= -4, %2, 2f\n" "\n" -" ldws 4(%1), %%r20\n" -" ldws 8(%1), %%r21\n" -" add %0, %%r20, %0\n" -" ldws,ma 12(%1), %%r19\n" -" addc %0, %%r21, %0\n" -" addc %0, %%r19, %0\n" -"1: ldws,ma 4(%1), %%r19\n" +" ldws 4(%1), %4\n" +" ldws 8(%1), %5\n" +" add %0, %4, %0\n" +" ldws,ma 12(%1), %3\n" +" addc %0, %5, %0\n" +" addc %0, %3, %0\n" +"1: ldws,ma 4(%1), %3\n" " addib,< 0, %2, 1b\n" -" addc %0, %%r19, %0\n" +" addc %0, %3, %0\n" "\n" -" extru %0, 31, 16, %%r20\n" -" extru %0, 15, 16, %%r21\n" -" addc %%r20, %%r21, %0\n" -" extru %0, 15, 16, %%r21\n" -" add %0, %%r21, %0\n" +" extru %0, 31, 16, %4\n" +" extru %0, 15, 16, %5\n" +" addc %4, %5, %0\n" +" extru %0, 15, 16, %5\n" +" add %0, %5, %0\n" " subi -1, %0, %0\n" "2:\n" - : "=r" (sum), "=r" (iph), "=r" (ihl) + : "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (t0), "=r" (t1), "=r" (t2) : "1" (iph), "2" (ihl) - : "r19", "r20", "r21", "memory"); + : "memory"); return (__force __sum16)sum; } @@ -126,6 +127,10 @@ static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr, __u32 len, __u8 proto, __wsum sum) { + unsigned long t0, t1, t2, t3; + + len += proto; /* add 16-bit proto + len */ + __asm__ __volatile__ ( #if BITS_PER_LONG > 32 @@ -136,20 +141,19 @@ static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr, ** Try to keep 4 registers with "live" values ahead of the ALU. */ -" ldd,ma 8(%1), %%r19\n" /* get 1st saddr word */ -" ldd,ma 8(%2), %%r20\n" /* get 1st daddr word */ -" add %8, %3, %3\n"/* add 16-bit proto + len */ -" add %%r19, %0, %0\n" -" ldd,ma 8(%1), %%r21\n" /* 2cd saddr */ -" ldd,ma 8(%2), %%r22\n" /* 2cd daddr */ -" add,dc %%r20, %0, %0\n" -" add,dc %%r21, %0, %0\n" -" add,dc %%r22, %0, %0\n" +" ldd,ma 8(%1), %4\n" /* get 1st saddr word */ +" ldd,ma 8(%2), %5\n" /* get 1st daddr word */ +" add %4, %0, %0\n" +" ldd,ma 8(%1), %6\n" /* 2nd saddr */ +" ldd,ma 8(%2), %7\n" /* 2nd daddr */ +" add,dc %5, %0, %0\n" +" add,dc %6, %0, %0\n" +" add,dc %7, %0, %0\n" " add,dc %3, %0, %0\n" /* fold in proto+len | carry bit */ -" extrd,u %0, 31, 32, %%r19\n" /* copy upper half down */ -" depdi 0, 31, 32, %0\n" /* clear upper half */ -" add %%r19, %0, %0\n" /* fold into 32-bits */ -" addc 0, %0, %0\n" /* add carry */ +" extrd,u %0, 31, 32, %4\n"/* copy upper half down */ +" depdi 0, 31, 32, %0\n"/* clear upper half */ +" add %4, %0, %0\n" /* fold into 32-bits */ +" addc 0, %0, %0\n" /* add carry */ #else @@ -158,30 +162,29 @@ static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr, ** Insn stream is serialized on the carry bit here too. ** result from the previous operation (eg r0 + x) */ - -" ldw,ma 4(%1), %%r19\n" /* get 1st saddr word */ -" ldw,ma 4(%2), %%r20\n" /* get 1st daddr word */ -" add %8, %3, %3\n" /* add 16-bit proto + len */ -" add %%r19, %0, %0\n" -" ldw,ma 4(%1), %%r21\n" /* 2cd saddr */ -" addc %%r20, %0, %0\n" -" ldw,ma 4(%2), %%r22\n" /* 2cd daddr */ -" addc %%r21, %0, %0\n" -" ldw,ma 4(%1), %%r19\n" /* 3rd saddr */ -" addc %%r22, %0, %0\n" -" ldw,ma 4(%2), %%r20\n" /* 3rd daddr */ -" addc %%r19, %0, %0\n" -" ldw,ma 4(%1), %%r21\n" /* 4th saddr */ -" addc %%r20, %0, %0\n" -" ldw,ma 4(%2), %%r22\n" /* 4th daddr */ -" addc %%r21, %0, %0\n" -" addc %%r22, %0, %0\n" +" ldw,ma 4(%1), %4\n" /* get 1st saddr word */ +" ldw,ma 4(%2), %5\n" /* get 1st daddr word */ +" add %4, %0, %0\n" +" ldw,ma 4(%1), %6\n" /* 2nd saddr */ +" addc %5, %0, %0\n" +" ldw,ma 4(%2), %7\n" /* 2nd daddr */ +" addc %6, %0, %0\n" +" ldw,ma 4(%1), %4\n" /* 3rd saddr */ +" addc %7, %0, %0\n" +" ldw,ma 4(%2), %5\n" /* 3rd daddr */ +" addc %4, %0, %0\n" +" ldw,ma 4(%1), %6\n" /* 4th saddr */ +" addc %5, %0, %0\n" +" ldw,ma 4(%2), %7\n" /* 4th daddr */ +" addc %6, %0, %0\n" +" addc %7, %0, %0\n" " addc %3, %0, %0\n" /* fold in proto+len, catch carry */ #endif - : "=r" (sum), "=r" (saddr), "=r" (daddr), "=r" (len) - : "0" (sum), "1" (saddr), "2" (daddr), "3" (len), "r" (proto) - : "r19", "r20", "r21", "r22", "memory"); + : "=r" (sum), "=r" (saddr), "=r" (daddr), "=r" (len), + "=r" (t0), "=r" (t1), "=r" (t2), "=r" (t3) + : "0" (sum), "1" (saddr), "2" (daddr), "3" (len) + : "memory"); return csum_fold(sum); } diff --git a/arch/parisc/include/asm/io.h b/arch/parisc/include/asm/io.h index 93d37010b375..46212b52c23e 100644 --- a/arch/parisc/include/asm/io.h +++ b/arch/parisc/include/asm/io.h @@ -127,16 +127,7 @@ static inline void gsc_writeq(unsigned long long val, unsigned long addr) /* * The standard PCI ioremap interfaces */ - -extern void __iomem * __ioremap(unsigned long offset, unsigned long size, unsigned long flags); - -/* Most machines react poorly to I/O-space being cacheable... Instead let's - * define ioremap() in terms of ioremap_nocache(). - */ -static inline void __iomem * ioremap(unsigned long offset, unsigned long size) -{ - return __ioremap(offset, size, _PAGE_NO_CACHE); -} +void __iomem *ioremap(unsigned long offset, unsigned long size); #define ioremap_nocache(off, sz) ioremap((off), (sz)) #define ioremap_wc ioremap_nocache #define ioremap_uc ioremap_nocache diff --git a/arch/parisc/include/asm/page.h b/arch/parisc/include/asm/page.h index 93caf17ac5e2..796ae29e9b9a 100644 --- a/arch/parisc/include/asm/page.h +++ b/arch/parisc/include/asm/page.h @@ -42,48 +42,54 @@ typedef struct { unsigned long pte; } pte_t; /* either 32 or 64bit */ /* NOTE: even on 64 bits, these entries are __u32 because we allocate * the pmd and pgd in ZONE_DMA (i.e. under 4GB) */ -typedef struct { __u32 pmd; } pmd_t; typedef struct { __u32 pgd; } pgd_t; typedef struct { unsigned long pgprot; } pgprot_t; -#define pte_val(x) ((x).pte) -/* These do not work lvalues, so make sure we don't use them as such. */ +#if CONFIG_PGTABLE_LEVELS == 3 +typedef struct { __u32 pmd; } pmd_t; +#define __pmd(x) ((pmd_t) { (x) } ) +/* pXd_val() do not work as lvalues, so make sure we don't use them as such. */ #define pmd_val(x) ((x).pmd + 0) +#endif + +#define pte_val(x) ((x).pte) #define pgd_val(x) ((x).pgd + 0) #define pgprot_val(x) ((x).pgprot) #define __pte(x) ((pte_t) { (x) } ) -#define __pmd(x) ((pmd_t) { (x) } ) #define __pgd(x) ((pgd_t) { (x) } ) #define __pgprot(x) ((pgprot_t) { (x) } ) -#define __pmd_val_set(x,n) (x).pmd = (n) -#define __pgd_val_set(x,n) (x).pgd = (n) - #else /* * .. while these make it easier on the compiler */ typedef unsigned long pte_t; + +#if CONFIG_PGTABLE_LEVELS == 3 typedef __u32 pmd_t; +#define pmd_val(x) (x) +#define __pmd(x) (x) +#endif + typedef __u32 pgd_t; typedef unsigned long pgprot_t; #define pte_val(x) (x) -#define pmd_val(x) (x) #define pgd_val(x) (x) #define pgprot_val(x) (x) #define __pte(x) (x) -#define __pmd(x) (x) #define __pgd(x) (x) #define __pgprot(x) (x) -#define __pmd_val_set(x,n) (x) = (n) -#define __pgd_val_set(x,n) (x) = (n) - #endif /* STRICT_MM_TYPECHECKS */ +#define set_pmd(pmdptr, pmdval) (*(pmdptr) = (pmdval)) +#if CONFIG_PGTABLE_LEVELS == 3 +#define set_pud(pudptr, pudval) (*(pudptr) = (pudval)) +#endif + typedef struct page *pgtable_t; typedef struct __physmem_range { diff --git a/arch/parisc/include/asm/pgalloc.h b/arch/parisc/include/asm/pgalloc.h index d98647c29b74..9ac74da256b8 100644 --- a/arch/parisc/include/asm/pgalloc.h +++ b/arch/parisc/include/asm/pgalloc.h @@ -34,13 +34,13 @@ static inline pgd_t *pgd_alloc(struct mm_struct *mm) /* Populate first pmd with allocated memory. We mark it * with PxD_FLAG_ATTACHED as a signal to the system that this * pmd entry may not be cleared. */ - __pgd_val_set(*actual_pgd, (PxD_FLAG_PRESENT | - PxD_FLAG_VALID | - PxD_FLAG_ATTACHED) - + (__u32)(__pa((unsigned long)pgd) >> PxD_VALUE_SHIFT)); + set_pgd(actual_pgd, __pgd((PxD_FLAG_PRESENT | + PxD_FLAG_VALID | + PxD_FLAG_ATTACHED) + + (__u32)(__pa((unsigned long)pgd) >> PxD_VALUE_SHIFT))); /* The first pmd entry also is marked with PxD_FLAG_ATTACHED as * a signal that this pmd may not be freed */ - __pgd_val_set(*pgd, PxD_FLAG_ATTACHED); + set_pgd(pgd, __pgd(PxD_FLAG_ATTACHED)); #endif } spin_lock_init(pgd_spinlock(actual_pgd)); @@ -59,10 +59,10 @@ static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) /* Three Level Page Table Support for pmd's */ -static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmd) +static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) { - __pgd_val_set(*pgd, (PxD_FLAG_PRESENT | PxD_FLAG_VALID) + - (__u32)(__pa((unsigned long)pmd) >> PxD_VALUE_SHIFT)); + set_pud(pud, __pud((PxD_FLAG_PRESENT | PxD_FLAG_VALID) + + (__u32)(__pa((unsigned long)pmd) >> PxD_VALUE_SHIFT))); } static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address) @@ -88,19 +88,6 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) free_pages((unsigned long)pmd, PMD_ORDER); } -#else - -/* Two Level Page Table Support for pmd's */ - -/* - * allocating and freeing a pmd is trivial: the 1-entry pmd is - * inside the pgd, so has no extra memory associated with it. - */ - -#define pmd_alloc_one(mm, addr) ({ BUG(); ((pmd_t *)2); }) -#define pmd_free(mm, x) do { } while (0) -#define pgd_populate(mm, pmd, pte) BUG() - #endif static inline void @@ -110,14 +97,14 @@ pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte) /* preserve the gateway marker if this is the beginning of * the permanent pmd */ if(pmd_flag(*pmd) & PxD_FLAG_ATTACHED) - __pmd_val_set(*pmd, (PxD_FLAG_PRESENT | - PxD_FLAG_VALID | - PxD_FLAG_ATTACHED) - + (__u32)(__pa((unsigned long)pte) >> PxD_VALUE_SHIFT)); + set_pmd(pmd, __pmd((PxD_FLAG_PRESENT | + PxD_FLAG_VALID | + PxD_FLAG_ATTACHED) + + (__u32)(__pa((unsigned long)pte) >> PxD_VALUE_SHIFT))); else #endif - __pmd_val_set(*pmd, (PxD_FLAG_PRESENT | PxD_FLAG_VALID) - + (__u32)(__pa((unsigned long)pte) >> PxD_VALUE_SHIFT)); + set_pmd(pmd, __pmd((PxD_FLAG_PRESENT | PxD_FLAG_VALID) + + (__u32)(__pa((unsigned long)pte) >> PxD_VALUE_SHIFT))); } #define pmd_populate(mm, pmd, pte_page) \ diff --git a/arch/parisc/include/asm/pgtable.h b/arch/parisc/include/asm/pgtable.h index 4ac374b3a99f..f0a365950536 100644 --- a/arch/parisc/include/asm/pgtable.h +++ b/arch/parisc/include/asm/pgtable.h @@ -3,7 +3,12 @@ #define _PARISC_PGTABLE_H #include <asm/page.h> -#include <asm-generic/4level-fixup.h> + +#if CONFIG_PGTABLE_LEVELS == 3 +#include <asm-generic/pgtable-nopud.h> +#elif CONFIG_PGTABLE_LEVELS == 2 +#include <asm-generic/pgtable-nopmd.h> +#endif #include <asm/fixmap.h> @@ -101,8 +106,10 @@ static inline void purge_tlb_entries(struct mm_struct *mm, unsigned long addr) #define pte_ERROR(e) \ printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) +#if CONFIG_PGTABLE_LEVELS == 3 #define pmd_ERROR(e) \ printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, (unsigned long)pmd_val(e)) +#endif #define pgd_ERROR(e) \ printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, (unsigned long)pgd_val(e)) @@ -132,19 +139,18 @@ static inline void purge_tlb_entries(struct mm_struct *mm, unsigned long addr) #define PTRS_PER_PTE (1UL << BITS_PER_PTE) /* Definitions for 2nd level */ +#if CONFIG_PGTABLE_LEVELS == 3 #define PMD_SHIFT (PLD_SHIFT + BITS_PER_PTE) #define PMD_SIZE (1UL << PMD_SHIFT) #define PMD_MASK (~(PMD_SIZE-1)) -#if CONFIG_PGTABLE_LEVELS == 3 #define BITS_PER_PMD (PAGE_SHIFT + PMD_ORDER - BITS_PER_PMD_ENTRY) +#define PTRS_PER_PMD (1UL << BITS_PER_PMD) #else -#define __PAGETABLE_PMD_FOLDED 1 #define BITS_PER_PMD 0 #endif -#define PTRS_PER_PMD (1UL << BITS_PER_PMD) /* Definitions for 1st level */ -#define PGDIR_SHIFT (PMD_SHIFT + BITS_PER_PMD) +#define PGDIR_SHIFT (PLD_SHIFT + BITS_PER_PTE + BITS_PER_PMD) #if (PGDIR_SHIFT + PAGE_SHIFT + PGD_ORDER - BITS_PER_PGD_ENTRY) > BITS_PER_LONG #define BITS_PER_PGD (BITS_PER_LONG - PGDIR_SHIFT) #else @@ -317,6 +323,8 @@ extern unsigned long *empty_zero_page; #define pmd_flag(x) (pmd_val(x) & PxD_FLAG_MASK) #define pmd_address(x) ((unsigned long)(pmd_val(x) &~ PxD_FLAG_MASK) << PxD_VALUE_SHIFT) +#define pud_flag(x) (pud_val(x) & PxD_FLAG_MASK) +#define pud_address(x) ((unsigned long)(pud_val(x) &~ PxD_FLAG_MASK) << PxD_VALUE_SHIFT) #define pgd_flag(x) (pgd_val(x) & PxD_FLAG_MASK) #define pgd_address(x) ((unsigned long)(pgd_val(x) &~ PxD_FLAG_MASK) << PxD_VALUE_SHIFT) @@ -334,42 +342,32 @@ static inline void pmd_clear(pmd_t *pmd) { if (pmd_flag(*pmd) & PxD_FLAG_ATTACHED) /* This is the entry pointing to the permanent pmd * attached to the pgd; cannot clear it */ - __pmd_val_set(*pmd, PxD_FLAG_ATTACHED); + set_pmd(pmd, __pmd(PxD_FLAG_ATTACHED)); else #endif - __pmd_val_set(*pmd, 0); + set_pmd(pmd, __pmd(0)); } #if CONFIG_PGTABLE_LEVELS == 3 -#define pgd_page_vaddr(pgd) ((unsigned long) __va(pgd_address(pgd))) -#define pgd_page(pgd) virt_to_page((void *)pgd_page_vaddr(pgd)) +#define pud_page_vaddr(pud) ((unsigned long) __va(pud_address(pud))) +#define pud_page(pud) virt_to_page((void *)pud_page_vaddr(pud)) /* For 64 bit we have three level tables */ -#define pgd_none(x) (!pgd_val(x)) -#define pgd_bad(x) (!(pgd_flag(x) & PxD_FLAG_VALID)) -#define pgd_present(x) (pgd_flag(x) & PxD_FLAG_PRESENT) -static inline void pgd_clear(pgd_t *pgd) { +#define pud_none(x) (!pud_val(x)) +#define pud_bad(x) (!(pud_flag(x) & PxD_FLAG_VALID)) +#define pud_present(x) (pud_flag(x) & PxD_FLAG_PRESENT) +static inline void pud_clear(pud_t *pud) { #if CONFIG_PGTABLE_LEVELS == 3 - if(pgd_flag(*pgd) & PxD_FLAG_ATTACHED) - /* This is the permanent pmd attached to the pgd; cannot + if(pud_flag(*pud) & PxD_FLAG_ATTACHED) + /* This is the permanent pmd attached to the pud; cannot * free it */ return; #endif - __pgd_val_set(*pgd, 0); + set_pud(pud, __pud(0)); } -#else -/* - * The "pgd_xxx()" functions here are trivial for a folded two-level - * setup: the pgd is never bad, and a pmd always exists (as it's folded - * into the pgd entry) - */ -static inline int pgd_none(pgd_t pgd) { return 0; } -static inline int pgd_bad(pgd_t pgd) { return 0; } -static inline int pgd_present(pgd_t pgd) { return 1; } -static inline void pgd_clear(pgd_t * pgdp) { } #endif /* @@ -452,7 +450,7 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) #if CONFIG_PGTABLE_LEVELS == 3 #define pmd_index(addr) (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1)) #define pmd_offset(dir,address) \ -((pmd_t *) pgd_page_vaddr(*(dir)) + pmd_index(address)) +((pmd_t *) pud_page_vaddr(*(dir)) + pmd_index(address)) #else #define pmd_offset(dir,addr) ((pmd_t *) dir) #endif diff --git a/arch/parisc/include/asm/tlb.h b/arch/parisc/include/asm/tlb.h index 8c0446b04c9e..44235f367674 100644 --- a/arch/parisc/include/asm/tlb.h +++ b/arch/parisc/include/asm/tlb.h @@ -4,7 +4,9 @@ #include <asm-generic/tlb.h> +#if CONFIG_PGTABLE_LEVELS == 3 #define __pmd_free_tlb(tlb, pmd, addr) pmd_free((tlb)->mm, pmd) +#endif #define __pte_free_tlb(tlb, pte, addr) pte_free((tlb)->mm, pte) #endif diff --git a/arch/parisc/include/uapi/asm/msgbuf.h b/arch/parisc/include/uapi/asm/msgbuf.h index 6a2e9ab2ef8d..3b4de5b668c3 100644 --- a/arch/parisc/include/uapi/asm/msgbuf.h +++ b/arch/parisc/include/uapi/asm/msgbuf.h @@ -3,6 +3,7 @@ #define _PARISC_MSGBUF_H #include <asm/bitsperlong.h> +#include <asm/ipcbuf.h> /* * The msqid64_ds structure for parisc architecture, copied from sparc. @@ -16,9 +17,9 @@ struct msqid64_ds { struct ipc64_perm msg_perm; #if __BITS_PER_LONG == 64 - __kernel_time_t msg_stime; /* last msgsnd time */ - __kernel_time_t msg_rtime; /* last msgrcv time */ - __kernel_time_t msg_ctime; /* last change time */ + long msg_stime; /* last msgsnd time */ + long msg_rtime; /* last msgrcv time */ + long msg_ctime; /* last change time */ #else unsigned long msg_stime_high; unsigned long msg_stime; /* last msgsnd time */ diff --git a/arch/parisc/include/uapi/asm/sembuf.h b/arch/parisc/include/uapi/asm/sembuf.h index 3c31163b1241..e2ca4301c7fb 100644 --- a/arch/parisc/include/uapi/asm/sembuf.h +++ b/arch/parisc/include/uapi/asm/sembuf.h @@ -3,6 +3,7 @@ #define _PARISC_SEMBUF_H #include <asm/bitsperlong.h> +#include <asm/ipcbuf.h> /* * The semid64_ds structure for parisc architecture. @@ -16,8 +17,8 @@ struct semid64_ds { struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ #if __BITS_PER_LONG == 64 - __kernel_time_t sem_otime; /* last semop time */ - __kernel_time_t sem_ctime; /* last change time */ + long sem_otime; /* last semop time */ + long sem_ctime; /* last change time */ #else unsigned long sem_otime_high; unsigned long sem_otime; /* last semop time */ diff --git a/arch/parisc/include/uapi/asm/shmbuf.h b/arch/parisc/include/uapi/asm/shmbuf.h index c89b3dd8db21..5da3089be65e 100644 --- a/arch/parisc/include/uapi/asm/shmbuf.h +++ b/arch/parisc/include/uapi/asm/shmbuf.h @@ -16,9 +16,9 @@ struct shmid64_ds { struct ipc64_perm shm_perm; /* operation perms */ #if __BITS_PER_LONG == 64 - __kernel_time_t shm_atime; /* last attach time */ - __kernel_time_t shm_dtime; /* last detach time */ - __kernel_time_t shm_ctime; /* last change time */ + long shm_atime; /* last attach time */ + long shm_dtime; /* last detach time */ + long shm_ctime; /* last change time */ #else unsigned long shm_atime_high; unsigned long shm_atime; /* last attach time */ diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c index a82b3eaa5398..1eedfecc5137 100644 --- a/arch/parisc/kernel/cache.c +++ b/arch/parisc/kernel/cache.c @@ -365,7 +365,7 @@ void flush_dcache_page(struct page *page) if (old_addr == 0 || (old_addr & (SHM_COLOUR - 1)) != (addr & (SHM_COLOUR - 1))) { __flush_cache_page(mpnt, addr, page_to_phys(page)); - if (old_addr) + if (parisc_requires_coherency() && old_addr) printk(KERN_ERR "INEQUIVALENT ALIASES 0x%lx and 0x%lx in file %pD\n", old_addr, addr, mpnt->vm_file); old_addr = addr; } @@ -534,11 +534,14 @@ static inline pte_t *get_ptep(pgd_t *pgd, unsigned long addr) pte_t *ptep = NULL; if (!pgd_none(*pgd)) { - pud_t *pud = pud_offset(pgd, addr); - if (!pud_none(*pud)) { - pmd_t *pmd = pmd_offset(pud, addr); - if (!pmd_none(*pmd)) - ptep = pte_offset_map(pmd, addr); + p4d_t *p4d = p4d_offset(pgd, addr); + if (!p4d_none(*p4d)) { + pud_t *pud = pud_offset(p4d, addr); + if (!pud_none(*pud)) { + pmd_t *pmd = pmd_offset(pud, addr); + if (!pmd_none(*pmd)) + ptep = pte_offset_map(pmd, addr); + } } } return ptep; diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c index ca35d9a76e50..0f1b460ee715 100644 --- a/arch/parisc/kernel/pci-dma.c +++ b/arch/parisc/kernel/pci-dma.c @@ -133,9 +133,14 @@ static inline int map_uncached_pages(unsigned long vaddr, unsigned long size, dir = pgd_offset_k(vaddr); do { + p4d_t *p4d; + pud_t *pud; pmd_t *pmd; - - pmd = pmd_alloc(NULL, dir, vaddr); + + p4d = p4d_offset(dir, vaddr); + pud = pud_offset(p4d, vaddr); + pmd = pmd_alloc(NULL, pud, vaddr); + if (!pmd) return -ENOMEM; if (map_pmd_uncached(pmd, vaddr, end - vaddr, &paddr)) @@ -439,14 +444,14 @@ void arch_dma_free(struct device *dev, size_t size, void *vaddr, free_pages((unsigned long)__va(dma_handle), order); } -void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_device(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { flush_kernel_dcache_range((unsigned long)phys_to_virt(paddr), size); } -void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { flush_kernel_dcache_range((unsigned long)phys_to_virt(paddr), size); } diff --git a/arch/parisc/kernel/ptrace.c b/arch/parisc/kernel/ptrace.c index 9f6ff7bc06f9..f8c07dcbfb49 100644 --- a/arch/parisc/kernel/ptrace.c +++ b/arch/parisc/kernel/ptrace.c @@ -342,7 +342,7 @@ long do_syscall_trace_enter(struct pt_regs *regs) } /* Do the secure computing check after ptrace. */ - if (secure_computing(NULL) == -1) + if (secure_computing() == -1) return -1; #ifdef CONFIG_HAVE_SYSCALL_TRACEPOINTS diff --git a/arch/parisc/mm/fixmap.c b/arch/parisc/mm/fixmap.c index 474cd241c150..e2d8b0a857ee 100644 --- a/arch/parisc/mm/fixmap.c +++ b/arch/parisc/mm/fixmap.c @@ -14,11 +14,13 @@ void notrace set_fixmap(enum fixed_addresses idx, phys_addr_t phys) { unsigned long vaddr = __fix_to_virt(idx); pgd_t *pgd = pgd_offset_k(vaddr); - pmd_t *pmd = pmd_offset(pgd, vaddr); + p4d_t *p4d = p4d_offset(pgd, vaddr); + pud_t *pud = pud_offset(p4d, vaddr); + pmd_t *pmd = pmd_offset(pud, vaddr); pte_t *pte; if (pmd_none(*pmd)) - pmd = pmd_alloc(NULL, pgd, vaddr); + pmd = pmd_alloc(NULL, pud, vaddr); pte = pte_offset_kernel(pmd, vaddr); if (pte_none(*pte)) @@ -32,7 +34,9 @@ void notrace clear_fixmap(enum fixed_addresses idx) { unsigned long vaddr = __fix_to_virt(idx); pgd_t *pgd = pgd_offset_k(vaddr); - pmd_t *pmd = pmd_offset(pgd, vaddr); + p4d_t *p4d = p4d_offset(pgd, vaddr); + pud_t *pud = pud_offset(p4d, vaddr); + pmd_t *pmd = pmd_offset(pud, vaddr); pte_t *pte = pte_offset_kernel(pmd, vaddr); if (WARN_ON(pte_none(*pte))) diff --git a/arch/parisc/mm/hugetlbpage.c b/arch/parisc/mm/hugetlbpage.c index d578809e55cf..0e1e212f1c96 100644 --- a/arch/parisc/mm/hugetlbpage.c +++ b/arch/parisc/mm/hugetlbpage.c @@ -49,6 +49,7 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz) { pgd_t *pgd; + p4d_t *p4d; pud_t *pud; pmd_t *pmd; pte_t *pte = NULL; @@ -61,7 +62,8 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, addr &= HPAGE_MASK; pgd = pgd_offset(mm, addr); - pud = pud_alloc(mm, pgd, addr); + p4d = p4d_offset(pgd, addr); + pud = pud_alloc(mm, p4d, addr); if (pud) { pmd = pmd_alloc(mm, pud, addr); if (pmd) @@ -74,6 +76,7 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr, unsigned long sz) { pgd_t *pgd; + p4d_t *p4d; pud_t *pud; pmd_t *pmd; pte_t *pte = NULL; @@ -82,11 +85,14 @@ pte_t *huge_pte_offset(struct mm_struct *mm, pgd = pgd_offset(mm, addr); if (!pgd_none(*pgd)) { - pud = pud_offset(pgd, addr); - if (!pud_none(*pud)) { - pmd = pmd_offset(pud, addr); - if (!pmd_none(*pmd)) - pte = pte_offset_map(pmd, addr); + p4d = p4d_offset(pgd, addr); + if (!p4d_none(*p4d)) { + pud = pud_offset(p4d, addr); + if (!pud_none(*pud)) { + pmd = pmd_offset(pud, addr); + if (!pmd_none(*pmd)) + pte = pte_offset_map(pmd, addr); + } } } return pte; diff --git a/arch/parisc/mm/ioremap.c b/arch/parisc/mm/ioremap.c index f29f682352f0..6e7c005aa09b 100644 --- a/arch/parisc/mm/ioremap.c +++ b/arch/parisc/mm/ioremap.c @@ -25,7 +25,7 @@ * have to convert them into an offset in a page-aligned mapping, but the * caller shouldn't need to know that small detail. */ -void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags) +void __iomem *ioremap(unsigned long phys_addr, unsigned long size) { void __iomem *addr; struct vm_struct *area; @@ -36,10 +36,8 @@ void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned l unsigned long end = phys_addr + size - 1; /* Support EISA addresses */ if ((phys_addr >= 0x00080000 && end < 0x000fffff) || - (phys_addr >= 0x00500000 && end < 0x03bfffff)) { + (phys_addr >= 0x00500000 && end < 0x03bfffff)) phys_addr |= F_EXTEND(0xfc000000); - flags |= _PAGE_NO_CACHE; - } #endif /* Don't allow wraparound or zero size */ @@ -65,7 +63,7 @@ void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned l } pgprot = __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | - _PAGE_ACCESSED | flags); + _PAGE_ACCESSED | _PAGE_NO_CACHE); /* * Mappings have to be page-aligned @@ -90,7 +88,7 @@ void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned l return (void __iomem *) (offset + (char __iomem *)addr); } -EXPORT_SYMBOL(__ioremap); +EXPORT_SYMBOL(ioremap); void iounmap(const volatile void __iomem *io_addr) { diff --git a/arch/powerpc/Kbuild b/arch/powerpc/Kbuild index 51e6908323ad..5e2f9eaa3ee7 100644 --- a/arch/powerpc/Kbuild +++ b/arch/powerpc/Kbuild @@ -14,4 +14,5 @@ obj-$(CONFIG_XMON) += xmon/ obj-$(CONFIG_KVM) += kvm/ obj-$(CONFIG_PERF_EVENTS) += perf/ +obj-$(CONFIG_KEXEC_CORE) += kexec/ obj-$(CONFIG_KEXEC_FILE) += purgatory/ diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 3e56c9c2f16e..1ec34e16ed65 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -161,6 +161,7 @@ config PPC select GENERIC_CMOS_UPDATE select GENERIC_CPU_AUTOPROBE select GENERIC_CPU_VULNERABILITIES if PPC_BARRIER_NOSPEC + select GENERIC_EARLY_IOREMAP select GENERIC_IRQ_SHOW select GENERIC_IRQ_SHOW_LEVEL select GENERIC_PCI_IOMAP if PCI @@ -451,6 +452,23 @@ config PPC_TRANSACTIONAL_MEM help Support user-mode Transactional Memory on POWERPC. +config PPC_UV + bool "Ultravisor support" + depends on KVM_BOOK3S_HV_POSSIBLE + select ZONE_DEVICE + select DEV_PAGEMAP_OPS + select DEVICE_PRIVATE + select MEMORY_HOTPLUG + select MEMORY_HOTREMOVE + default n + help + This option paravirtualizes the kernel to run in POWER platforms that + supports the Protected Execution Facility (PEF). On such platforms, + the ultravisor firmware runs at a privilege level above the + hypervisor. + + If unsure, say "N". + config LD_HEAD_STUB_CATCH bool "Reserve 256 bytes to cope with linker stubs in HEAD text" if EXPERT depends on PPC64 @@ -551,6 +569,17 @@ config RELOCATABLE setting can still be useful to bootwrappers that need to know the load address of the kernel (eg. u-boot/mkimage). +config RANDOMIZE_BASE + bool "Randomize the address of the kernel image" + depends on (FSL_BOOKE && FLATMEM && PPC32) + depends on RELOCATABLE + help + Randomizes the virtual address at which the kernel image is + loaded, as a security feature that deters exploit attempts + relying on knowledge of the location of kernel internals. + + If unsure, say Y. + config RELOCATABLE_TEST bool "Test relocatable kernel" depends on (PPC64 && RELOCATABLE) @@ -874,15 +903,33 @@ config CMDLINE some command-line options at build time by entering them here. In most cases you will need to specify the root device here. +choice + prompt "Kernel command line type" if CMDLINE != "" + default CMDLINE_FROM_BOOTLOADER + +config CMDLINE_FROM_BOOTLOADER + bool "Use bootloader kernel arguments if available" + help + Uses the command-line options passed by the boot loader. If + the boot loader doesn't provide any, the default kernel command + string provided in CMDLINE will be used. + +config CMDLINE_EXTEND + bool "Extend bootloader kernel arguments" + help + The command-line arguments provided by the boot loader will be + appended to the default kernel command string. + config CMDLINE_FORCE bool "Always use the default kernel command string" - depends on CMDLINE_BOOL help Always use the default kernel command string, even if the boot loader passes other arguments to the kernel. This is useful if you cannot or don't want to change the command-line options your boot loader passes to the kernel. +endchoice + config EXTRA_TARGETS string "Additional default image types" help @@ -934,6 +981,28 @@ config PPC_MEM_KEYS If unsure, say y. +config PPC_SECURE_BOOT + prompt "Enable secure boot support" + bool + depends on PPC_POWERNV + depends on IMA_ARCH_POLICY + help + Systems with firmware secure boot enabled need to define security + policies to extend secure boot to the OS. This config allows a user + to enable OS secure boot on systems that have firmware support for + it. If in doubt say N. + +config PPC_SECVAR_SYSFS + bool "Enable sysfs interface for POWER secure variables" + default y + depends on PPC_SECURE_BOOT + depends on SYSFS + help + POWER secure variables are managed and controlled by firmware. + These variables are exposed to userspace via sysfs to enable + read/write operations on these variables. Say Y if you have + secure boot enabled and want to expose variables to userspace. + endmenu config ISA_DMA_API diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index c59920920ddc..4e1d39847462 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -122,8 +122,8 @@ config XMON_DEFAULT_RO_MODE depends on XMON default y help - Operate xmon in read-only mode. The cmdline options 'xmon=rw' and - 'xmon=ro' override this default. + Operate xmon in read-only mode. The cmdline options 'xmon=rw' and + 'xmon=ro' override this default. config DEBUGGER bool @@ -222,7 +222,7 @@ config PPC_EARLY_DEBUG_44x help Select this to enable early debugging for IBM 44x chips via the inbuilt serial port. If you enable this, ensure you set - PPC_EARLY_DEBUG_44x_PHYSLOW below to suit your target board. + PPC_EARLY_DEBUG_44x_PHYSLOW below to suit your target board. config PPC_EARLY_DEBUG_40x bool "Early serial debugging for IBM/AMCC 40x CPUs" @@ -325,7 +325,7 @@ config PPC_EARLY_DEBUG_44x_PHYSLOW default "0x40000200" help You probably want 0x40000200 for ebony boards and - 0x40000300 for taishan + 0x40000300 for taishan config PPC_EARLY_DEBUG_44x_PHYSHIGH hex "EPRN of early debug UART physical address" @@ -359,9 +359,9 @@ config FAIL_IOMMU If you are unsure, say N. config PPC_PTDUMP - bool "Export kernel pagetable layout to userspace via debugfs" - depends on DEBUG_KERNEL && DEBUG_FS - help + bool "Export kernel pagetable layout to userspace via debugfs" + depends on DEBUG_KERNEL && DEBUG_FS + help This option exports the state of the kernel pagetables to a debugfs file. This is only useful for kernel developers who are working in architecture specific areas of the kernel - probably @@ -390,8 +390,8 @@ config PPC_DEBUG_WX config PPC_FAST_ENDIAN_SWITCH bool "Deprecated fast endian-switch syscall" - depends on DEBUG_KERNEL && PPC_BOOK3S_64 - help + depends on DEBUG_KERNEL && PPC_BOOK3S_64 + help If you're unsure what this is, say N. config KASAN_SHADOW_OFFSET diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 83522c9fc7b6..f35730548e42 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -91,11 +91,13 @@ MULTIPLEWORD := -mmultiple endif ifdef CONFIG_PPC64 +ifndef CONFIG_CC_IS_CLANG cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(call cc-option,-mabi=elfv1) cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(call cc-option,-mcall-aixdesc) aflags-$(CONFIG_CPU_BIG_ENDIAN) += $(call cc-option,-mabi=elfv1) aflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -mabi=elfv2 endif +endif ifndef CONFIG_CC_IS_CLANG cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -mno-strict-align @@ -141,6 +143,7 @@ endif endif CFLAGS-$(CONFIG_PPC64) := $(call cc-option,-mtraceback=no) +ifndef CONFIG_CC_IS_CLANG ifdef CONFIG_CPU_LITTLE_ENDIAN CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv2,$(call cc-option,-mcall-aixdesc)) AFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv2) @@ -149,6 +152,7 @@ CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv1) CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mcall-aixdesc) AFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv1) endif +endif CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mcmodel=medium,$(call cc-option,-mminimal-toc)) CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mno-pointers-to-nested-functions) @@ -330,32 +334,32 @@ powernv_be_defconfig: PHONY += mpc85xx_defconfig mpc85xx_defconfig: - $(call merge_into_defconfig,mpc85xx_basic_defconfig,\ + $(call merge_into_defconfig,mpc85xx_base.config,\ 85xx-32bit 85xx-hw fsl-emb-nonhw) PHONY += mpc85xx_smp_defconfig mpc85xx_smp_defconfig: - $(call merge_into_defconfig,mpc85xx_basic_defconfig,\ + $(call merge_into_defconfig,mpc85xx_base.config,\ 85xx-32bit 85xx-smp 85xx-hw fsl-emb-nonhw) PHONY += corenet32_smp_defconfig corenet32_smp_defconfig: - $(call merge_into_defconfig,corenet_basic_defconfig,\ + $(call merge_into_defconfig,corenet_base.config,\ 85xx-32bit 85xx-smp 85xx-hw fsl-emb-nonhw dpaa) PHONY += corenet64_smp_defconfig corenet64_smp_defconfig: - $(call merge_into_defconfig,corenet_basic_defconfig,\ + $(call merge_into_defconfig,corenet_base.config,\ 85xx-64bit 85xx-smp altivec 85xx-hw fsl-emb-nonhw dpaa) PHONY += mpc86xx_defconfig mpc86xx_defconfig: - $(call merge_into_defconfig,mpc86xx_basic_defconfig,\ + $(call merge_into_defconfig,mpc86xx_base.config,\ 86xx-hw fsl-emb-nonhw) PHONY += mpc86xx_smp_defconfig mpc86xx_smp_defconfig: - $(call merge_into_defconfig,mpc86xx_basic_defconfig,\ + $(call merge_into_defconfig,mpc86xx_base.config,\ 86xx-smp 86xx-hw fsl-emb-nonhw) PHONY += ppc32_allmodconfig diff --git a/arch/powerpc/boot/dts/fsl/kmcent2.dts b/arch/powerpc/boot/dts/fsl/kmcent2.dts index 48b7f9797124..8e7f0828af29 100644 --- a/arch/powerpc/boot/dts/fsl/kmcent2.dts +++ b/arch/powerpc/boot/dts/fsl/kmcent2.dts @@ -210,13 +210,19 @@ fman@400000 { ethernet@e0000 { - fixed-link = <0 1 1000 0 0>; - phy-connection-type = "sgmii"; + phy-mode = "sgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; }; ethernet@e2000 { - fixed-link = <1 1 1000 0 0>; - phy-connection-type = "sgmii"; + phy-mode = "sgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; }; ethernet@e4000 { @@ -229,7 +235,7 @@ ethernet@e8000 { phy-handle = <&front_phy>; - phy-connection-type = "rgmii"; + phy-mode = "rgmii-id"; }; mdio0: mdio@fc000 { @@ -258,14 +264,50 @@ pci1: pcie@ffe250000 { status = "disabled"; + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000 + 0x01000000 0 0 0xf 0xf8010000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; }; pci2: pcie@ffe260000 { status = "disabled"; + reg = <0xf 0xfe260000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; }; pci3: pcie@ffe270000 { status = "disabled"; + reg = <0xf 0xfe270000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; }; qe: qe@ffe140000 { diff --git a/arch/powerpc/boot/libfdt_env.h b/arch/powerpc/boot/libfdt_env.h index 2abc8e83b95e..9757d4f6331e 100644 --- a/arch/powerpc/boot/libfdt_env.h +++ b/arch/powerpc/boot/libfdt_env.h @@ -6,6 +6,8 @@ #include <string.h> #define INT_MAX ((int)(~0U>>1)) +#define UINT32_MAX ((u32)~0U) +#define INT32_MAX ((s32)(UINT32_MAX >> 1)) #include "of.h" diff --git a/arch/powerpc/configs/40x/acadia_defconfig b/arch/powerpc/configs/40x/acadia_defconfig index 5a75e4f14273..db93c117be36 100644 --- a/arch/powerpc/configs/40x/acadia_defconfig +++ b/arch/powerpc/configs/40x/acadia_defconfig @@ -18,9 +18,6 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set CONFIG_CONNECTOR=y CONFIG_MTD=y diff --git a/arch/powerpc/configs/40x/ep405_defconfig b/arch/powerpc/configs/40x/ep405_defconfig index e2691c5db766..a3854cf65f8d 100644 --- a/arch/powerpc/configs/40x/ep405_defconfig +++ b/arch/powerpc/configs/40x/ep405_defconfig @@ -17,9 +17,6 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set CONFIG_CONNECTOR=y CONFIG_MTD=y diff --git a/arch/powerpc/configs/40x/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig index 949989ef2322..edc22464dfb5 100644 --- a/arch/powerpc/configs/40x/kilauea_defconfig +++ b/arch/powerpc/configs/40x/kilauea_defconfig @@ -20,9 +20,6 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set CONFIG_CONNECTOR=y CONFIG_MTD=y diff --git a/arch/powerpc/configs/40x/klondike_defconfig b/arch/powerpc/configs/40x/klondike_defconfig index 4347a87088dc..579fa846839c 100644 --- a/arch/powerpc/configs/40x/klondike_defconfig +++ b/arch/powerpc/configs/40x/klondike_defconfig @@ -4,7 +4,6 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y -CONFIG_SYSCTL_SYSCALL=y CONFIG_EMBEDDED=y CONFIG_SLAB=y CONFIG_MODULES=y diff --git a/arch/powerpc/configs/40x/makalu_defconfig b/arch/powerpc/configs/40x/makalu_defconfig index 90b759bbf426..188789b9aa4c 100644 --- a/arch/powerpc/configs/40x/makalu_defconfig +++ b/arch/powerpc/configs/40x/makalu_defconfig @@ -17,9 +17,6 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set CONFIG_CONNECTOR=y CONFIG_MTD=y diff --git a/arch/powerpc/configs/40x/obs600_defconfig b/arch/powerpc/configs/40x/obs600_defconfig index 881c300c011d..5bf6af7ef093 100644 --- a/arch/powerpc/configs/40x/obs600_defconfig +++ b/arch/powerpc/configs/40x/obs600_defconfig @@ -20,9 +20,6 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set CONFIG_CONNECTOR=y CONFIG_MTD=y diff --git a/arch/powerpc/configs/40x/walnut_defconfig b/arch/powerpc/configs/40x/walnut_defconfig index 0ed46704b9fa..9eaaf1a1d2c6 100644 --- a/arch/powerpc/configs/40x/walnut_defconfig +++ b/arch/powerpc/configs/40x/walnut_defconfig @@ -15,9 +15,6 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set CONFIG_CONNECTOR=y CONFIG_MTD=y diff --git a/arch/powerpc/configs/44x/akebono_defconfig b/arch/powerpc/configs/44x/akebono_defconfig index 2fa553ebfdc9..f0c8a07cc274 100644 --- a/arch/powerpc/configs/44x/akebono_defconfig +++ b/arch/powerpc/configs/44x/akebono_defconfig @@ -29,9 +29,6 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y diff --git a/arch/powerpc/configs/44x/arches_defconfig b/arch/powerpc/configs/44x/arches_defconfig index 5a1b9ee18075..82c6f49b8dcb 100644 --- a/arch/powerpc/configs/44x/arches_defconfig +++ b/arch/powerpc/configs/44x/arches_defconfig @@ -20,9 +20,6 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set CONFIG_CONNECTOR=y CONFIG_MTD=y diff --git a/arch/powerpc/configs/44x/bamboo_defconfig b/arch/powerpc/configs/44x/bamboo_defconfig index 22e1ef5272ab..679213214a75 100644 --- a/arch/powerpc/configs/44x/bamboo_defconfig +++ b/arch/powerpc/configs/44x/bamboo_defconfig @@ -18,9 +18,6 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set CONFIG_CONNECTOR=y CONFIG_BLK_DEV_RAM=y diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig index 86f34ea4173a..ccc14eb7a2f1 100644 --- a/arch/powerpc/configs/44x/canyonlands_defconfig +++ b/arch/powerpc/configs/44x/canyonlands_defconfig @@ -20,9 +20,6 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set CONFIG_CONNECTOR=y CONFIG_MTD=y diff --git a/arch/powerpc/configs/44x/currituck_defconfig b/arch/powerpc/configs/44x/currituck_defconfig index ce3ec5a2cd15..be76e066df01 100644 --- a/arch/powerpc/configs/44x/currituck_defconfig +++ b/arch/powerpc/configs/44x/currituck_defconfig @@ -27,9 +27,6 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y diff --git a/arch/powerpc/configs/44x/ebony_defconfig b/arch/powerpc/configs/44x/ebony_defconfig index f67447c92e6f..93d2a4e64af9 100644 --- a/arch/powerpc/configs/44x/ebony_defconfig +++ b/arch/powerpc/configs/44x/ebony_defconfig @@ -16,9 +16,6 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set CONFIG_CONNECTOR=y CONFIG_MTD=y diff --git a/arch/powerpc/configs/44x/eiger_defconfig b/arch/powerpc/configs/44x/eiger_defconfig index 5dbd83a1c11b..1abaa63e067f 100644 --- a/arch/powerpc/configs/44x/eiger_defconfig +++ b/arch/powerpc/configs/44x/eiger_defconfig @@ -21,9 +21,6 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set CONFIG_CONNECTOR=y CONFIG_MTD=y diff --git a/arch/powerpc/configs/44x/fsp2_defconfig b/arch/powerpc/configs/44x/fsp2_defconfig index e49114f0e526..e67fc041ca3e 100644 --- a/arch/powerpc/configs/44x/fsp2_defconfig +++ b/arch/powerpc/configs/44x/fsp2_defconfig @@ -39,9 +39,6 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set CONFIG_VLAN_8021Q=m CONFIG_DEVTMPFS=y diff --git a/arch/powerpc/configs/44x/icon_defconfig b/arch/powerpc/configs/44x/icon_defconfig index fa5378af44f9..7d7ff84c8200 100644 --- a/arch/powerpc/configs/44x/icon_defconfig +++ b/arch/powerpc/configs/44x/icon_defconfig @@ -20,9 +20,6 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set CONFIG_CONNECTOR=y CONFIG_MTD=y diff --git a/arch/powerpc/configs/44x/iss476-smp_defconfig b/arch/powerpc/configs/44x/iss476-smp_defconfig index aae879c21239..fb5c73a29bf4 100644 --- a/arch/powerpc/configs/44x/iss476-smp_defconfig +++ b/arch/powerpc/configs/44x/iss476-smp_defconfig @@ -29,9 +29,6 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set CONFIG_CONNECTOR=y CONFIG_MTD=y diff --git a/arch/powerpc/configs/44x/katmai_defconfig b/arch/powerpc/configs/44x/katmai_defconfig index 56eddca998c6..c6dc1445fc04 100644 --- a/arch/powerpc/configs/44x/katmai_defconfig +++ b/arch/powerpc/configs/44x/katmai_defconfig @@ -18,9 +18,6 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set CONFIG_CONNECTOR=y CONFIG_MTD=y diff --git a/arch/powerpc/configs/44x/rainier_defconfig b/arch/powerpc/configs/44x/rainier_defconfig index 369bfd2e451d..c83ad03182df 100644 --- a/arch/powerpc/configs/44x/rainier_defconfig +++ b/arch/powerpc/configs/44x/rainier_defconfig @@ -19,9 +19,6 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set CONFIG_CONNECTOR=y CONFIG_MTD=y diff --git a/arch/powerpc/configs/44x/redwood_defconfig b/arch/powerpc/configs/44x/redwood_defconfig index 8be95f6fe3a7..640fe1d5af28 100644 --- a/arch/powerpc/configs/44x/redwood_defconfig +++ b/arch/powerpc/configs/44x/redwood_defconfig @@ -21,9 +21,6 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set CONFIG_CONNECTOR=y CONFIG_MTD=y diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig index 974a4f038cda..ed02f12dbd54 100644 --- a/arch/powerpc/configs/44x/sam440ep_defconfig +++ b/arch/powerpc/configs/44x/sam440ep_defconfig @@ -23,9 +23,6 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set CONFIG_CONNECTOR=y CONFIG_BLK_DEV_LOOP=y diff --git a/arch/powerpc/configs/44x/sequoia_defconfig b/arch/powerpc/configs/44x/sequoia_defconfig index 10e517b69fa4..2c0973db8837 100644 --- a/arch/powerpc/configs/44x/sequoia_defconfig +++ b/arch/powerpc/configs/44x/sequoia_defconfig @@ -20,9 +20,6 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set CONFIG_CONNECTOR=y CONFIG_MTD=y diff --git a/arch/powerpc/configs/44x/taishan_defconfig b/arch/powerpc/configs/44x/taishan_defconfig index cd08f3ddd609..a2d355ca62b2 100644 --- a/arch/powerpc/configs/44x/taishan_defconfig +++ b/arch/powerpc/configs/44x/taishan_defconfig @@ -18,9 +18,6 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set CONFIG_CONNECTOR=y CONFIG_MTD=y diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig index 303600ff1fdb..fdb11daeb688 100644 --- a/arch/powerpc/configs/52xx/pcm030_defconfig +++ b/arch/powerpc/configs/52xx/pcm030_defconfig @@ -31,9 +31,6 @@ CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set # CONFIG_FW_LOADER is not set diff --git a/arch/powerpc/configs/83xx/kmeter1_defconfig b/arch/powerpc/configs/83xx/kmeter1_defconfig index d21b5cb365f2..648c6b3dccf9 100644 --- a/arch/powerpc/configs/83xx/kmeter1_defconfig +++ b/arch/powerpc/configs/83xx/kmeter1_defconfig @@ -25,9 +25,6 @@ CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set CONFIG_TIPC=y CONFIG_BRIDGE=m diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig index dad53ef86b49..cbcae2a927e9 100644 --- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig @@ -22,9 +22,6 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_SYN_COOKIES=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set # CONFIG_FW_LOADER is not set CONFIG_BLK_DEV_LOOP=y diff --git a/arch/powerpc/configs/85xx/ge_imp3a_defconfig b/arch/powerpc/configs/85xx/ge_imp3a_defconfig index 920f37316fdb..f29c166998af 100644 --- a/arch/powerpc/configs/85xx/ge_imp3a_defconfig +++ b/arch/powerpc/configs/85xx/ge_imp3a_defconfig @@ -60,7 +60,6 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m -# CONFIG_INET_XFRM_MODE_BEET is not set CONFIG_INET6_AH=m CONFIG_INET6_IPCOMP=m CONFIG_IPV6_TUNNEL=m diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig index f7a803ab2285..510f7fd1f6a3 100644 --- a/arch/powerpc/configs/adder875_defconfig +++ b/arch/powerpc/configs/adder875_defconfig @@ -22,9 +22,6 @@ CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y CONFIG_SYN_COOKIES=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set # CONFIG_FW_LOADER is not set CONFIG_MTD=y diff --git a/arch/powerpc/configs/amigaone_defconfig b/arch/powerpc/configs/amigaone_defconfig index cf94d28d0e31..f6d140f2d922 100644 --- a/arch/powerpc/configs/amigaone_defconfig +++ b/arch/powerpc/configs/amigaone_defconfig @@ -26,9 +26,6 @@ CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_SYN_COOKIES=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_ADVANCED is not set diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index 2dd1b58a18ae..42fbc70cec33 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -51,11 +51,9 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=y CONFIG_SYN_COOKIES=y -# CONFIG_INET_XFRM_MODE_BEET is not set CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -# CONFIG_INET6_XFRM_MODE_BEET is not set # CONFIG_IPV6_SIT is not set CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig index 9ff493dd8439..502a75d49789 100644 --- a/arch/powerpc/configs/chrp32_defconfig +++ b/arch/powerpc/configs/chrp32_defconfig @@ -27,9 +27,6 @@ CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_SYN_COOKIES=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_ADVANCED is not set diff --git a/arch/powerpc/configs/corenet_basic_defconfig b/arch/powerpc/configs/corenet_base.config index b568d465e59e..b568d465e59e 100644 --- a/arch/powerpc/configs/corenet_basic_defconfig +++ b/arch/powerpc/configs/corenet_base.config diff --git a/arch/powerpc/configs/debug.config b/arch/powerpc/configs/debug.config new file mode 100644 index 000000000000..a14ae1f20d60 --- /dev/null +++ b/arch/powerpc/configs/debug.config @@ -0,0 +1 @@ +CONFIG_SCOM_DEBUGFS=y diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig index b20bd0cf3543..9c1bf60f1e19 100644 --- a/arch/powerpc/configs/ep88xc_defconfig +++ b/arch/powerpc/configs/ep88xc_defconfig @@ -24,9 +24,6 @@ CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y CONFIG_SYN_COOKIES=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set # CONFIG_FW_LOADER is not set CONFIG_MTD=y diff --git a/arch/powerpc/configs/gamecube_defconfig b/arch/powerpc/configs/gamecube_defconfig index 85e73c3bd859..24c0e0ea5aeb 100644 --- a/arch/powerpc/configs/gamecube_defconfig +++ b/arch/powerpc/configs/gamecube_defconfig @@ -29,9 +29,6 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_RARP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set # CONFIG_WIRELESS is not set diff --git a/arch/powerpc/configs/mpc512x_defconfig b/arch/powerpc/configs/mpc512x_defconfig index 6203c1093a3a..1f3a045ab081 100644 --- a/arch/powerpc/configs/mpc512x_defconfig +++ b/arch/powerpc/configs/mpc512x_defconfig @@ -25,9 +25,6 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_PNP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set CONFIG_CAN=y diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig index 6f87a5c74960..83d801307178 100644 --- a/arch/powerpc/configs/mpc5200_defconfig +++ b/arch/powerpc/configs/mpc5200_defconfig @@ -15,7 +15,6 @@ CONFIG_PPC_MEDIA5200=y CONFIG_PPC_MPC5200_BUGFIX=y CONFIG_PPC_MPC5200_LPBFIFO=m # CONFIG_PPC_PMAC is not set -CONFIG_SIMPLE_GPIO=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y diff --git a/arch/powerpc/configs/mpc85xx_basic_defconfig b/arch/powerpc/configs/mpc85xx_base.config index b1593fe6f70b..b1593fe6f70b 100644 --- a/arch/powerpc/configs/mpc85xx_basic_defconfig +++ b/arch/powerpc/configs/mpc85xx_base.config diff --git a/arch/powerpc/configs/mpc86xx_basic_defconfig b/arch/powerpc/configs/mpc86xx_base.config index 67bd1fa036ee..67bd1fa036ee 100644 --- a/arch/powerpc/configs/mpc86xx_basic_defconfig +++ b/arch/powerpc/configs/mpc86xx_base.config diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig index 285d506c5a76..0327a329316f 100644 --- a/arch/powerpc/configs/mpc885_ads_defconfig +++ b/arch/powerpc/configs/mpc885_ads_defconfig @@ -23,9 +23,6 @@ CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y CONFIG_SYN_COOKIES=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set # CONFIG_FW_LOADER is not set CONFIG_MTD=y diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig index 4e6e95f92646..f492e7d35925 100644 --- a/arch/powerpc/configs/pmac32_defconfig +++ b/arch/powerpc/configs/pmac32_defconfig @@ -38,8 +38,6 @@ CONFIG_IP_MULTICAST=y CONFIG_SYN_COOKIES=y CONFIG_INET_AH=y CONFIG_INET_ESP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_IPV6 is not set CONFIG_NETFILTER=y CONFIG_NF_CONNTRACK=m diff --git a/arch/powerpc/configs/powernv_defconfig b/arch/powerpc/configs/powernv_defconfig index 6658cceb928c..32841456a573 100644 --- a/arch/powerpc/configs/powernv_defconfig +++ b/arch/powerpc/configs/powernv_defconfig @@ -83,9 +83,6 @@ CONFIG_INET_IPCOMP=m CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m CONFIG_IPV6_SIT=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_ADVANCED is not set diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig index 67952819593e..a41eedfe0a5f 100644 --- a/arch/powerpc/configs/ppc44x_defconfig +++ b/arch/powerpc/configs/ppc44x_defconfig @@ -32,9 +32,6 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set CONFIG_BRIDGE=m CONFIG_CONNECTOR=y CONFIG_MTD=y diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig index 9dca4cffa623..7e28919041cf 100644 --- a/arch/powerpc/configs/ppc6xx_defconfig +++ b/arch/powerpc/configs/ppc6xx_defconfig @@ -109,9 +109,6 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=m CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_HSTCP=m @@ -129,7 +126,6 @@ CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m CONFIG_IPV6_MIP6=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m CONFIG_IPV6_TUNNEL=m CONFIG_IPV6_MULTIPLE_TABLES=y CONFIG_IPV6_SUBTREES=y diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig index 314c63939816..4db51719342a 100644 --- a/arch/powerpc/configs/ps3_defconfig +++ b/arch/powerpc/configs/ps3_defconfig @@ -47,9 +47,6 @@ CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_DIAG is not set CONFIG_BT=m CONFIG_BT_RFCOMM=m diff --git a/arch/powerpc/configs/skiroot_defconfig b/arch/powerpc/configs/skiroot_defconfig index 1253482a67c0..069f67f12731 100644 --- a/arch/powerpc/configs/skiroot_defconfig +++ b/arch/powerpc/configs/skiroot_defconfig @@ -46,6 +46,7 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_IDLE=y CONFIG_HZ_100=y CONFIG_KEXEC=y +CONFIG_PRESERVE_FA_DUMP=y CONFIG_IRQ_ALL_CPUS=y CONFIG_NUMA=y # CONFIG_COMPACTION is not set @@ -63,9 +64,6 @@ CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_NET_IPIP=y CONFIG_SYN_COOKIES=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set CONFIG_DNS_RESOLVER=y # CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig index 6c39c52b8e4a..29b19ec7e5d7 100644 --- a/arch/powerpc/configs/storcenter_defconfig +++ b/arch/powerpc/configs/storcenter_defconfig @@ -22,9 +22,6 @@ CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y diff --git a/arch/powerpc/configs/tqm8xx_defconfig b/arch/powerpc/configs/tqm8xx_defconfig index 7493f36dd6e9..ffed2b4256d6 100644 --- a/arch/powerpc/configs/tqm8xx_defconfig +++ b/arch/powerpc/configs/tqm8xx_defconfig @@ -27,9 +27,6 @@ CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_SYN_COOKIES=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set # CONFIG_WIRELESS is not set # CONFIG_FW_LOADER is not set diff --git a/arch/powerpc/configs/wii_defconfig b/arch/powerpc/configs/wii_defconfig index 5a04448ad6b5..379c171f3ddd 100644 --- a/arch/powerpc/configs/wii_defconfig +++ b/arch/powerpc/configs/wii_defconfig @@ -29,9 +29,6 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_RARP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set CONFIG_BT=y diff --git a/arch/powerpc/crypto/crc-vpmsum_test.c b/arch/powerpc/crypto/crc-vpmsum_test.c index 47985219a68f..dce86e75f1a8 100644 --- a/arch/powerpc/crypto/crc-vpmsum_test.c +++ b/arch/powerpc/crypto/crc-vpmsum_test.c @@ -103,6 +103,7 @@ static int __init crc_test_init(void) crc32, verify32, len); break; } + cond_resched(); } pr_info("crc-vpmsum_test done, completed %lu iterations\n", i); } while (0); diff --git a/arch/powerpc/include/asm/Kbuild b/arch/powerpc/include/asm/Kbuild index 64870c7be4a3..d0a23d0db863 100644 --- a/arch/powerpc/include/asm/Kbuild +++ b/arch/powerpc/include/asm/Kbuild @@ -4,10 +4,11 @@ generated-y += syscall_table_64.h generated-y += syscall_table_c32.h generated-y += syscall_table_spu.h generic-y += div64.h +generic-y += dma-mapping.h generic-y += export.h generic-y += irq_regs.h generic-y += local64.h generic-y += mcs_spinlock.h generic-y += preempt.h generic-y += vtime.h -generic-y += msi.h +generic-y += early_ioremap.h diff --git a/arch/powerpc/include/asm/archrandom.h b/arch/powerpc/include/asm/archrandom.h index 9c63b596e6ce..a09595f00cab 100644 --- a/arch/powerpc/include/asm/archrandom.h +++ b/arch/powerpc/include/asm/archrandom.h @@ -28,7 +28,7 @@ static inline int arch_get_random_seed_int(unsigned int *v) unsigned long val; int rc; - rc = arch_get_random_long(&val); + rc = arch_get_random_seed_long(&val); if (rc) *v = val; diff --git a/arch/powerpc/include/asm/asm-prototypes.h b/arch/powerpc/include/asm/asm-prototypes.h index 8561498e653c..983c0084fb3f 100644 --- a/arch/powerpc/include/asm/asm-prototypes.h +++ b/arch/powerpc/include/asm/asm-prototypes.h @@ -92,7 +92,8 @@ long sys_swapcontext(struct ucontext __user *old_ctx, long sys_debug_setcontext(struct ucontext __user *ctx, int ndbg, struct sig_dbg_op __user *dbg); int -ppc_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp, struct timeval __user *tvp); +ppc_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp, + struct __kernel_old_timeval __user *tvp); unsigned long __init early_init(unsigned long dt_ptr); void __init machine_init(u64 dt_ptr); #endif @@ -152,9 +153,12 @@ void _kvmppc_save_tm_pr(struct kvm_vcpu *vcpu, u64 guest_msr); /* Patch sites */ extern s32 patch__call_flush_count_cache; extern s32 patch__flush_count_cache_return; +extern s32 patch__flush_link_stack_return; +extern s32 patch__call_kvm_flush_link_stack; extern s32 patch__memset_nocache, patch__memcpy_nocache; extern long flush_count_cache; +extern long kvm_flush_link_stack; #ifdef CONFIG_PPC_TRANSACTIONAL_MEM void kvmppc_save_tm_hv(struct kvm_vcpu *vcpu, u64 msr, bool preserve_nv); diff --git a/arch/powerpc/include/asm/bitops.h b/arch/powerpc/include/asm/bitops.h index 603aed229af7..28dcf8222943 100644 --- a/arch/powerpc/include/asm/bitops.h +++ b/arch/powerpc/include/asm/bitops.h @@ -64,7 +64,7 @@ /* Macro for generating the ***_bits() functions */ #define DEFINE_BITOP(fn, op, prefix) \ -static __inline__ void fn(unsigned long mask, \ +static inline void fn(unsigned long mask, \ volatile unsigned long *_p) \ { \ unsigned long old; \ @@ -86,22 +86,22 @@ DEFINE_BITOP(clear_bits, andc, "") DEFINE_BITOP(clear_bits_unlock, andc, PPC_RELEASE_BARRIER) DEFINE_BITOP(change_bits, xor, "") -static __inline__ void set_bit(int nr, volatile unsigned long *addr) +static inline void arch_set_bit(int nr, volatile unsigned long *addr) { set_bits(BIT_MASK(nr), addr + BIT_WORD(nr)); } -static __inline__ void clear_bit(int nr, volatile unsigned long *addr) +static inline void arch_clear_bit(int nr, volatile unsigned long *addr) { clear_bits(BIT_MASK(nr), addr + BIT_WORD(nr)); } -static __inline__ void clear_bit_unlock(int nr, volatile unsigned long *addr) +static inline void arch_clear_bit_unlock(int nr, volatile unsigned long *addr) { clear_bits_unlock(BIT_MASK(nr), addr + BIT_WORD(nr)); } -static __inline__ void change_bit(int nr, volatile unsigned long *addr) +static inline void arch_change_bit(int nr, volatile unsigned long *addr) { change_bits(BIT_MASK(nr), addr + BIT_WORD(nr)); } @@ -109,7 +109,7 @@ static __inline__ void change_bit(int nr, volatile unsigned long *addr) /* Like DEFINE_BITOP(), with changes to the arguments to 'op' and the output * operands. */ #define DEFINE_TESTOP(fn, op, prefix, postfix, eh) \ -static __inline__ unsigned long fn( \ +static inline unsigned long fn( \ unsigned long mask, \ volatile unsigned long *_p) \ { \ @@ -138,34 +138,34 @@ DEFINE_TESTOP(test_and_clear_bits, andc, PPC_ATOMIC_ENTRY_BARRIER, DEFINE_TESTOP(test_and_change_bits, xor, PPC_ATOMIC_ENTRY_BARRIER, PPC_ATOMIC_EXIT_BARRIER, 0) -static __inline__ int test_and_set_bit(unsigned long nr, - volatile unsigned long *addr) +static inline int arch_test_and_set_bit(unsigned long nr, + volatile unsigned long *addr) { return test_and_set_bits(BIT_MASK(nr), addr + BIT_WORD(nr)) != 0; } -static __inline__ int test_and_set_bit_lock(unsigned long nr, - volatile unsigned long *addr) +static inline int arch_test_and_set_bit_lock(unsigned long nr, + volatile unsigned long *addr) { return test_and_set_bits_lock(BIT_MASK(nr), addr + BIT_WORD(nr)) != 0; } -static __inline__ int test_and_clear_bit(unsigned long nr, - volatile unsigned long *addr) +static inline int arch_test_and_clear_bit(unsigned long nr, + volatile unsigned long *addr) { return test_and_clear_bits(BIT_MASK(nr), addr + BIT_WORD(nr)) != 0; } -static __inline__ int test_and_change_bit(unsigned long nr, - volatile unsigned long *addr) +static inline int arch_test_and_change_bit(unsigned long nr, + volatile unsigned long *addr) { return test_and_change_bits(BIT_MASK(nr), addr + BIT_WORD(nr)) != 0; } #ifdef CONFIG_PPC64 -static __inline__ unsigned long clear_bit_unlock_return_word(int nr, - volatile unsigned long *addr) +static inline unsigned long +clear_bit_unlock_return_word(int nr, volatile unsigned long *addr) { unsigned long old, t; unsigned long *p = (unsigned long *)addr + BIT_WORD(nr); @@ -185,15 +185,18 @@ static __inline__ unsigned long clear_bit_unlock_return_word(int nr, return old; } -/* This is a special function for mm/filemap.c */ -#define clear_bit_unlock_is_negative_byte(nr, addr) \ - (clear_bit_unlock_return_word(nr, addr) & BIT_MASK(PG_waiters)) +/* + * This is a special function for mm/filemap.c + * Bit 7 corresponds to PG_waiters. + */ +#define arch_clear_bit_unlock_is_negative_byte(nr, addr) \ + (clear_bit_unlock_return_word(nr, addr) & BIT_MASK(7)) #endif /* CONFIG_PPC64 */ #include <asm-generic/bitops/non-atomic.h> -static __inline__ void __clear_bit_unlock(int nr, volatile unsigned long *addr) +static inline void arch___clear_bit_unlock(int nr, volatile unsigned long *addr) { __asm__ __volatile__(PPC_RELEASE_BARRIER "" ::: "memory"); __clear_bit(nr, addr); @@ -215,14 +218,14 @@ static __inline__ void __clear_bit_unlock(int nr, volatile unsigned long *addr) * fls: find last (most-significant) bit set. * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32. */ -static __inline__ int fls(unsigned int x) +static inline int fls(unsigned int x) { return 32 - __builtin_clz(x); } #include <asm-generic/bitops/builtin-__fls.h> -static __inline__ int fls64(__u64 x) +static inline int fls64(__u64 x) { return 64 - __builtin_clzll(x); } @@ -239,6 +242,10 @@ unsigned long __arch_hweight64(__u64 w); #include <asm-generic/bitops/find.h> +/* wrappers that deal with KASAN instrumentation */ +#include <asm-generic/bitops/instrumented-atomic.h> +#include <asm-generic/bitops/instrumented-lock.h> + /* Little-endian versions */ #include <asm-generic/bitops/le.h> diff --git a/arch/powerpc/include/asm/book3s/64/pgalloc.h b/arch/powerpc/include/asm/book3s/64/pgalloc.h index d5a44912902f..f6968c811026 100644 --- a/arch/powerpc/include/asm/book3s/64/pgalloc.h +++ b/arch/powerpc/include/asm/book3s/64/pgalloc.h @@ -122,11 +122,6 @@ static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) static inline void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud, unsigned long address) { - /* - * By now all the pud entries should be none entries. So go - * ahead and flush the page walk cache - */ - flush_tlb_pgtable(tlb, address); pgtable_free_tlb(tlb, pud, PUD_INDEX); } @@ -143,11 +138,6 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd, unsigned long address) { - /* - * By now all the pud entries should be none entries. So go - * ahead and flush the page walk cache - */ - flush_tlb_pgtable(tlb, address); return pgtable_free_tlb(tlb, pmd, PMD_INDEX); } @@ -166,11 +156,6 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t table, unsigned long address) { - /* - * By now all the pud entries should be none entries. So go - * ahead and flush the page walk cache - */ - flush_tlb_pgtable(tlb, address); pgtable_free_tlb(tlb, table, PTE_INDEX); } diff --git a/arch/powerpc/include/asm/book3s/64/pgtable-4k.h b/arch/powerpc/include/asm/book3s/64/pgtable-4k.h index a069dfcac9a9..4e697bc2f4cd 100644 --- a/arch/powerpc/include/asm/book3s/64/pgtable-4k.h +++ b/arch/powerpc/include/asm/book3s/64/pgtable-4k.h @@ -70,9 +70,6 @@ static inline int get_hugepd_cache_index(int index) /* should not reach */ } -#else /* !CONFIG_HUGETLB_PAGE */ -static inline int pmd_huge(pmd_t pmd) { return 0; } -static inline int pud_huge(pud_t pud) { return 0; } #endif /* CONFIG_HUGETLB_PAGE */ #endif /* __ASSEMBLY__ */ diff --git a/arch/powerpc/include/asm/book3s/64/pgtable-64k.h b/arch/powerpc/include/asm/book3s/64/pgtable-64k.h index e3d4dd4ae2fa..34d1018896b3 100644 --- a/arch/powerpc/include/asm/book3s/64/pgtable-64k.h +++ b/arch/powerpc/include/asm/book3s/64/pgtable-64k.h @@ -59,9 +59,6 @@ static inline int get_hugepd_cache_index(int index) BUG(); } -#else /* !CONFIG_HUGETLB_PAGE */ -static inline int pmd_huge(pmd_t pmd) { return 0; } -static inline int pud_huge(pud_t pud) { return 0; } #endif /* CONFIG_HUGETLB_PAGE */ static inline int remap_4k_pfn(struct vm_area_struct *vma, unsigned long addr, diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush.h b/arch/powerpc/include/asm/book3s/64/tlbflush.h index 7aa8195b6cff..dcb5c3839d2f 100644 --- a/arch/powerpc/include/asm/book3s/64/tlbflush.h +++ b/arch/powerpc/include/asm/book3s/64/tlbflush.h @@ -147,22 +147,6 @@ static inline void flush_tlb_fix_spurious_fault(struct vm_area_struct *vma, flush_tlb_page(vma, address); } -/* - * flush the page walk cache for the address - */ -static inline void flush_tlb_pgtable(struct mmu_gather *tlb, unsigned long address) -{ - /* - * Flush the page table walk cache on freeing a page table. We already - * have marked the upper/higher level page table entry none by now. - * So it is safe to flush PWC here. - */ - if (!radix_enabled()) - return; - - radix__flush_tlb_pwc(tlb, address); -} - extern bool tlbie_capable; extern bool tlbie_enabled; diff --git a/arch/powerpc/include/asm/bug.h b/arch/powerpc/include/asm/bug.h index f47e6ff6554d..338f36cd9934 100644 --- a/arch/powerpc/include/asm/bug.h +++ b/arch/powerpc/include/asm/bug.h @@ -49,6 +49,15 @@ ".previous\n" #endif +#define BUG_ENTRY(insn, flags, ...) \ + __asm__ __volatile__( \ + "1: " insn "\n" \ + _EMIT_BUG_ENTRY \ + : : "i" (__FILE__), "i" (__LINE__), \ + "i" (flags), \ + "i" (sizeof(struct bug_entry)), \ + ##__VA_ARGS__) + /* * BUG_ON() and WARN_ON() do their best to cooperate with compile-time * optimisations. However depending on the complexity of the condition @@ -56,11 +65,7 @@ */ #define BUG() do { \ - __asm__ __volatile__( \ - "1: twi 31,0,0\n" \ - _EMIT_BUG_ENTRY \ - : : "i" (__FILE__), "i" (__LINE__), \ - "i" (0), "i" (sizeof(struct bug_entry))); \ + BUG_ENTRY("twi 31, 0, 0", 0); \ unreachable(); \ } while (0) @@ -69,23 +74,11 @@ if (x) \ BUG(); \ } else { \ - __asm__ __volatile__( \ - "1: "PPC_TLNEI" %4,0\n" \ - _EMIT_BUG_ENTRY \ - : : "i" (__FILE__), "i" (__LINE__), "i" (0), \ - "i" (sizeof(struct bug_entry)), \ - "r" ((__force long)(x))); \ + BUG_ENTRY(PPC_TLNEI " %4, 0", 0, "r" ((__force long)(x))); \ } \ } while (0) -#define __WARN_FLAGS(flags) do { \ - __asm__ __volatile__( \ - "1: twi 31,0,0\n" \ - _EMIT_BUG_ENTRY \ - : : "i" (__FILE__), "i" (__LINE__), \ - "i" (BUGFLAG_WARNING|(flags)), \ - "i" (sizeof(struct bug_entry))); \ -} while (0) +#define __WARN_FLAGS(flags) BUG_ENTRY("twi 31, 0, 0", BUGFLAG_WARNING | (flags)) #define WARN_ON(x) ({ \ int __ret_warn_on = !!(x); \ @@ -93,13 +86,9 @@ if (__ret_warn_on) \ __WARN(); \ } else { \ - __asm__ __volatile__( \ - "1: "PPC_TLNEI" %4,0\n" \ - _EMIT_BUG_ENTRY \ - : : "i" (__FILE__), "i" (__LINE__), \ - "i" (BUGFLAG_WARNING|BUGFLAG_TAINT(TAINT_WARN)),\ - "i" (sizeof(struct bug_entry)), \ - "r" (__ret_warn_on)); \ + BUG_ENTRY(PPC_TLNEI " %4, 0", \ + BUGFLAG_WARNING | BUGFLAG_TAINT(TAINT_WARN), \ + "r" (__ret_warn_on)); \ } \ unlikely(__ret_warn_on); \ }) diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h index 45e3137ccd71..72b81015cebe 100644 --- a/arch/powerpc/include/asm/cache.h +++ b/arch/powerpc/include/asm/cache.h @@ -55,42 +55,48 @@ struct ppc64_caches { extern struct ppc64_caches ppc64_caches; -static inline u32 l1_cache_shift(void) +static inline u32 l1_dcache_shift(void) { return ppc64_caches.l1d.log_block_size; } -static inline u32 l1_cache_bytes(void) +static inline u32 l1_dcache_bytes(void) { return ppc64_caches.l1d.block_size; } + +static inline u32 l1_icache_shift(void) +{ + return ppc64_caches.l1i.log_block_size; +} + +static inline u32 l1_icache_bytes(void) +{ + return ppc64_caches.l1i.block_size; +} #else -static inline u32 l1_cache_shift(void) +static inline u32 l1_dcache_shift(void) { return L1_CACHE_SHIFT; } -static inline u32 l1_cache_bytes(void) +static inline u32 l1_dcache_bytes(void) { return L1_CACHE_BYTES; } + +static inline u32 l1_icache_shift(void) +{ + return L1_CACHE_SHIFT; +} + +static inline u32 l1_icache_bytes(void) +{ + return L1_CACHE_BYTES; +} + #endif -#endif /* ! __ASSEMBLY__ */ - -#if defined(__ASSEMBLY__) -/* - * For a snooping icache, we still need a dummy icbi to purge all the - * prefetched instructions from the ifetch buffers. We also need a sync - * before the icbi to order the the actual stores to memory that might - * have modified instructions with the icbi. - */ -#define PURGE_PREFETCHED_INS \ - sync; \ - icbi 0,r3; \ - sync; \ - isync -#else #define __read_mostly __attribute__((__section__(".data..read_mostly"))) #ifdef CONFIG_PPC_BOOK3S_32 @@ -124,6 +130,17 @@ static inline void dcbst(void *addr) { __asm__ __volatile__ ("dcbst 0, %0" : : "r"(addr) : "memory"); } + +static inline void icbi(void *addr) +{ + asm volatile ("icbi 0, %0" : : "r"(addr) : "memory"); +} + +static inline void iccci(void *addr) +{ + asm volatile ("iccci 0, %0" : : "r"(addr) : "memory"); +} + #endif /* !__ASSEMBLY__ */ #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_CACHE_H */ diff --git a/arch/powerpc/include/asm/cacheflush.h b/arch/powerpc/include/asm/cacheflush.h index eef388f2659f..4a1c9f0200e1 100644 --- a/arch/powerpc/include/asm/cacheflush.h +++ b/arch/powerpc/include/asm/cacheflush.h @@ -42,29 +42,25 @@ extern void flush_dcache_page(struct page *page); #define flush_dcache_mmap_lock(mapping) do { } while (0) #define flush_dcache_mmap_unlock(mapping) do { } while (0) -extern void flush_icache_range(unsigned long, unsigned long); +void flush_icache_range(unsigned long start, unsigned long stop); extern void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, unsigned long addr, int len); -extern void __flush_dcache_icache(void *page_va); extern void flush_dcache_icache_page(struct page *page); -#if defined(CONFIG_PPC32) && !defined(CONFIG_BOOKE) -extern void __flush_dcache_icache_phys(unsigned long physaddr); -#else -static inline void __flush_dcache_icache_phys(unsigned long physaddr) -{ - BUG(); -} -#endif - -/* - * Write any modified data cache blocks out to memory and invalidate them. - * Does not invalidate the corresponding instruction cache blocks. +void __flush_dcache_icache(void *page); + +/** + * flush_dcache_range(): Write any modified data cache blocks out to memory and + * invalidate them. Does not invalidate the corresponding instruction cache + * blocks. + * + * @start: the start address + * @stop: the stop address (exclusive) */ static inline void flush_dcache_range(unsigned long start, unsigned long stop) { - unsigned long shift = l1_cache_shift(); - unsigned long bytes = l1_cache_bytes(); + unsigned long shift = l1_dcache_shift(); + unsigned long bytes = l1_dcache_bytes(); void *addr = (void *)(start & ~(bytes - 1)); unsigned long size = stop - (unsigned long)addr + (bytes - 1); unsigned long i; @@ -89,8 +85,8 @@ static inline void flush_dcache_range(unsigned long start, unsigned long stop) */ static inline void clean_dcache_range(unsigned long start, unsigned long stop) { - unsigned long shift = l1_cache_shift(); - unsigned long bytes = l1_cache_bytes(); + unsigned long shift = l1_dcache_shift(); + unsigned long bytes = l1_dcache_bytes(); void *addr = (void *)(start & ~(bytes - 1)); unsigned long size = stop - (unsigned long)addr + (bytes - 1); unsigned long i; @@ -108,8 +104,8 @@ static inline void clean_dcache_range(unsigned long start, unsigned long stop) static inline void invalidate_dcache_range(unsigned long start, unsigned long stop) { - unsigned long shift = l1_cache_shift(); - unsigned long bytes = l1_cache_bytes(); + unsigned long shift = l1_dcache_shift(); + unsigned long bytes = l1_dcache_bytes(); void *addr = (void *)(start & ~(bytes - 1)); unsigned long size = stop - (unsigned long)addr + (bytes - 1); unsigned long i; diff --git a/arch/powerpc/include/asm/dma-direct.h b/arch/powerpc/include/asm/dma-direct.h index a2912b47102c..abc154d784b0 100644 --- a/arch/powerpc/include/asm/dma-direct.h +++ b/arch/powerpc/include/asm/dma-direct.h @@ -2,26 +2,13 @@ #ifndef ASM_POWERPC_DMA_DIRECT_H #define ASM_POWERPC_DMA_DIRECT_H 1 -static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size) -{ - if (!dev->dma_mask) - return false; - - return addr + size - 1 <= - min_not_zero(*dev->dma_mask, dev->bus_dma_mask); -} - static inline dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr) { - if (!dev) - return paddr + PCI_DRAM_OFFSET; return paddr + dev->archdata.dma_offset; } static inline phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr) { - if (!dev) - return daddr - PCI_DRAM_OFFSET; return daddr - dev->archdata.dma_offset; } #endif /* ASM_POWERPC_DMA_DIRECT_H */ diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h deleted file mode 100644 index 565d6f74b189..000000000000 --- a/arch/powerpc/include/asm/dma-mapping.h +++ /dev/null @@ -1,18 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (C) 2004 IBM - */ -#ifndef _ASM_DMA_MAPPING_H -#define _ASM_DMA_MAPPING_H - -static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus) -{ - /* We don't handle the NULL dev case for ISA for now. We could - * do it via an out of line call but it is not needed for now. The - * only ISA DMA device we support is the floppy and we have a hack - * in the floppy driver directly to get a device for us. - */ - return NULL; -} - -#endif /* _ASM_DMA_MAPPING_H */ diff --git a/arch/powerpc/include/asm/fixmap.h b/arch/powerpc/include/asm/fixmap.h index 0cfc365d814b..2ef155a3c821 100644 --- a/arch/powerpc/include/asm/fixmap.h +++ b/arch/powerpc/include/asm/fixmap.h @@ -15,6 +15,7 @@ #define _ASM_FIXMAP_H #ifndef __ASSEMBLY__ +#include <linux/sizes.h> #include <asm/page.h> #include <asm/pgtable.h> #ifdef CONFIG_HIGHMEM @@ -63,7 +64,22 @@ enum fixed_addresses { FIX_IMMR_BASE = __ALIGN_MASK(FIX_IMMR_START, FIX_IMMR_SIZE - 1) - 1 + FIX_IMMR_SIZE, #endif +#ifdef CONFIG_PPC_83xx + /* For IMMR we need an aligned 2M area */ +#define FIX_IMMR_SIZE (SZ_2M / PAGE_SIZE) + FIX_IMMR_START, + FIX_IMMR_BASE = __ALIGN_MASK(FIX_IMMR_START, FIX_IMMR_SIZE - 1) - 1 + + FIX_IMMR_SIZE, +#endif /* FIX_PCIE_MCFG, */ + __end_of_permanent_fixed_addresses, + +#define NR_FIX_BTMAPS (SZ_256K / PAGE_SIZE) +#define FIX_BTMAPS_SLOTS 16 +#define TOTAL_FIX_BTMAPS (NR_FIX_BTMAPS * FIX_BTMAPS_SLOTS) + + FIX_BTMAP_END = __end_of_permanent_fixed_addresses, + FIX_BTMAP_BEGIN = FIX_BTMAP_END + TOTAL_FIX_BTMAPS - 1, __end_of_fixed_addresses }; @@ -71,14 +87,22 @@ enum fixed_addresses { #define FIXADDR_START (FIXADDR_TOP - __FIXADDR_SIZE) #define FIXMAP_PAGE_NOCACHE PAGE_KERNEL_NCG +#define FIXMAP_PAGE_IO PAGE_KERNEL_NCG #include <asm-generic/fixmap.h> static inline void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t flags) { - map_kernel_page(fix_to_virt(idx), phys, flags); + if (__builtin_constant_p(idx)) + BUILD_BUG_ON(idx >= __end_of_fixed_addresses); + else if (WARN_ON(idx >= __end_of_fixed_addresses)) + return; + + map_kernel_page(__fix_to_virt(idx), phys, flags); } +#define __early_set_fixmap __set_fixmap + #endif /* !__ASSEMBLY__ */ #endif diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h index 11112023e327..13bd870609c3 100644 --- a/arch/powerpc/include/asm/hvcall.h +++ b/arch/powerpc/include/asm/hvcall.h @@ -342,6 +342,15 @@ #define H_TLB_INVALIDATE 0xF808 #define H_COPY_TOFROM_GUEST 0xF80C +/* Flags for H_SVM_PAGE_IN */ +#define H_PAGE_IN_SHARED 0x1 + +/* Platform-specific hcalls used by the Ultravisor */ +#define H_SVM_PAGE_IN 0xEF00 +#define H_SVM_PAGE_OUT 0xEF04 +#define H_SVM_INIT_START 0xEF08 +#define H_SVM_INIT_DONE 0xEF0C + /* Values for 2nd argument to H_SET_MODE */ #define H_SET_MODE_RESOURCE_SET_CIABR 1 #define H_SET_MODE_RESOURCE_SET_DAWR 2 diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h index 67e2da195eae..27ac6f5d2891 100644 --- a/arch/powerpc/include/asm/hw_breakpoint.h +++ b/arch/powerpc/include/asm/hw_breakpoint.h @@ -14,6 +14,7 @@ struct arch_hw_breakpoint { unsigned long address; u16 type; u16 len; /* length of the target data symbol */ + u16 hw_len; /* length programmed in hw */ }; /* Note: Don't change the the first 6 bits below as they are in the same order @@ -33,6 +34,11 @@ struct arch_hw_breakpoint { #define HW_BRK_TYPE_PRIV_ALL (HW_BRK_TYPE_USER | HW_BRK_TYPE_KERNEL | \ HW_BRK_TYPE_HYP) +#define HW_BREAKPOINT_ALIGN 0x7 + +#define DABR_MAX_LEN 8 +#define DAWR_MAX_LEN 512 + #ifdef CONFIG_HAVE_HW_BREAKPOINT #include <linux/kdebug.h> #include <asm/reg.h> @@ -44,8 +50,6 @@ struct pmu; struct perf_sample_data; struct task_struct; -#define HW_BREAKPOINT_ALIGN 0x7 - extern int hw_breakpoint_slots(int type); extern int arch_bp_generic_fields(int type, int *gen_bp_type); extern int arch_check_bp_in_kernelspace(struct arch_hw_breakpoint *hw); @@ -70,6 +74,7 @@ static inline void hw_breakpoint_disable(void) brk.address = 0; brk.type = 0; brk.len = 0; + brk.hw_len = 0; if (ppc_breakpoint_available()) __set_breakpoint(&brk); } diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h index 32a18f2f49bc..e3a905e3d573 100644 --- a/arch/powerpc/include/asm/hw_irq.h +++ b/arch/powerpc/include/asm/hw_irq.h @@ -226,8 +226,8 @@ static inline bool arch_irqs_disabled(void) #endif /* CONFIG_PPC_BOOK3S */ #ifdef CONFIG_PPC_BOOK3E -#define __hard_irq_enable() asm volatile("wrteei 1" : : : "memory") -#define __hard_irq_disable() asm volatile("wrteei 0" : : : "memory") +#define __hard_irq_enable() wrtee(MSR_EE) +#define __hard_irq_disable() wrtee(0) #else #define __hard_irq_enable() __mtmsrd(MSR_EE|MSR_RI, 1) #define __hard_irq_disable() __mtmsrd(MSR_RI, 1) @@ -280,8 +280,6 @@ extern void force_external_irq_replay(void); #else /* CONFIG_PPC64 */ -#define SET_MSR_EE(x) mtmsr(x) - static inline unsigned long arch_local_save_flags(void) { return mfmsr(); @@ -289,47 +287,44 @@ static inline unsigned long arch_local_save_flags(void) static inline void arch_local_irq_restore(unsigned long flags) { -#if defined(CONFIG_BOOKE) - asm volatile("wrtee %0" : : "r" (flags) : "memory"); -#else - mtmsr(flags); -#endif + if (IS_ENABLED(CONFIG_BOOKE)) + wrtee(flags); + else + mtmsr(flags); } static inline unsigned long arch_local_irq_save(void) { unsigned long flags = arch_local_save_flags(); -#ifdef CONFIG_BOOKE - asm volatile("wrteei 0" : : : "memory"); -#elif defined(CONFIG_PPC_8xx) - wrtspr(SPRN_EID); -#else - SET_MSR_EE(flags & ~MSR_EE); -#endif + + if (IS_ENABLED(CONFIG_BOOKE)) + wrtee(0); + else if (IS_ENABLED(CONFIG_PPC_8xx)) + wrtspr(SPRN_EID); + else + mtmsr(flags & ~MSR_EE); + return flags; } static inline void arch_local_irq_disable(void) { -#ifdef CONFIG_BOOKE - asm volatile("wrteei 0" : : : "memory"); -#elif defined(CONFIG_PPC_8xx) - wrtspr(SPRN_EID); -#else - arch_local_irq_save(); -#endif + if (IS_ENABLED(CONFIG_BOOKE)) + wrtee(0); + else if (IS_ENABLED(CONFIG_PPC_8xx)) + wrtspr(SPRN_EID); + else + mtmsr(mfmsr() & ~MSR_EE); } static inline void arch_local_irq_enable(void) { -#ifdef CONFIG_BOOKE - asm volatile("wrteei 1" : : : "memory"); -#elif defined(CONFIG_PPC_8xx) - wrtspr(SPRN_EIE); -#else - unsigned long msr = mfmsr(); - SET_MSR_EE(msr | MSR_EE); -#endif + if (IS_ENABLED(CONFIG_BOOKE)) + wrtee(MSR_EE); + else if (IS_ENABLED(CONFIG_PPC_8xx)) + wrtspr(SPRN_EIE); + else + mtmsr(mfmsr() | MSR_EE); } static inline bool arch_irqs_disabled_flags(unsigned long flags) diff --git a/arch/powerpc/include/asm/kvm_book3s_uvmem.h b/arch/powerpc/include/asm/kvm_book3s_uvmem.h new file mode 100644 index 000000000000..50204e228f16 --- /dev/null +++ b/arch/powerpc/include/asm/kvm_book3s_uvmem.h @@ -0,0 +1,74 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __ASM_KVM_BOOK3S_UVMEM_H__ +#define __ASM_KVM_BOOK3S_UVMEM_H__ + +#ifdef CONFIG_PPC_UV +int kvmppc_uvmem_init(void); +void kvmppc_uvmem_free(void); +int kvmppc_uvmem_slot_init(struct kvm *kvm, const struct kvm_memory_slot *slot); +void kvmppc_uvmem_slot_free(struct kvm *kvm, + const struct kvm_memory_slot *slot); +unsigned long kvmppc_h_svm_page_in(struct kvm *kvm, + unsigned long gra, + unsigned long flags, + unsigned long page_shift); +unsigned long kvmppc_h_svm_page_out(struct kvm *kvm, + unsigned long gra, + unsigned long flags, + unsigned long page_shift); +unsigned long kvmppc_h_svm_init_start(struct kvm *kvm); +unsigned long kvmppc_h_svm_init_done(struct kvm *kvm); +int kvmppc_send_page_to_uv(struct kvm *kvm, unsigned long gfn); +void kvmppc_uvmem_drop_pages(const struct kvm_memory_slot *free, + struct kvm *kvm); +#else +static inline int kvmppc_uvmem_init(void) +{ + return 0; +} + +static inline void kvmppc_uvmem_free(void) { } + +static inline int +kvmppc_uvmem_slot_init(struct kvm *kvm, const struct kvm_memory_slot *slot) +{ + return 0; +} + +static inline void +kvmppc_uvmem_slot_free(struct kvm *kvm, const struct kvm_memory_slot *slot) { } + +static inline unsigned long +kvmppc_h_svm_page_in(struct kvm *kvm, unsigned long gra, + unsigned long flags, unsigned long page_shift) +{ + return H_UNSUPPORTED; +} + +static inline unsigned long +kvmppc_h_svm_page_out(struct kvm *kvm, unsigned long gra, + unsigned long flags, unsigned long page_shift) +{ + return H_UNSUPPORTED; +} + +static inline unsigned long kvmppc_h_svm_init_start(struct kvm *kvm) +{ + return H_UNSUPPORTED; +} + +static inline unsigned long kvmppc_h_svm_init_done(struct kvm *kvm) +{ + return H_UNSUPPORTED; +} + +static inline int kvmppc_send_page_to_uv(struct kvm *kvm, unsigned long gfn) +{ + return -EFAULT; +} + +static inline void +kvmppc_uvmem_drop_pages(const struct kvm_memory_slot *free, + struct kvm *kvm) { } +#endif /* CONFIG_PPC_UV */ +#endif /* __ASM_KVM_BOOK3S_UVMEM_H__ */ diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h index 4273e799203d..0a398f2321c2 100644 --- a/arch/powerpc/include/asm/kvm_host.h +++ b/arch/powerpc/include/asm/kvm_host.h @@ -275,6 +275,10 @@ struct kvm_hpt_info { struct kvm_resize_hpt; +/* Flag values for kvm_arch.secure_guest */ +#define KVMPPC_SECURE_INIT_START 0x1 /* H_SVM_INIT_START has been called */ +#define KVMPPC_SECURE_INIT_DONE 0x2 /* H_SVM_INIT_DONE completed */ + struct kvm_arch { unsigned int lpid; unsigned int smt_mode; /* # vcpus per virtual core */ @@ -330,6 +334,8 @@ struct kvm_arch { #endif struct kvmppc_ops *kvm_ops; #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE + struct mutex uvmem_lock; + struct list_head uvmem_pfns; struct mutex mmu_setup_lock; /* nests inside vcpu mutexes */ u64 l1_ptcr; int max_nested_lpid; diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h index d63f649fe713..3d2f871241a8 100644 --- a/arch/powerpc/include/asm/kvm_ppc.h +++ b/arch/powerpc/include/asm/kvm_ppc.h @@ -322,6 +322,7 @@ struct kvmppc_ops { int size); int (*store_to_eaddr)(struct kvm_vcpu *vcpu, ulong *eaddr, void *ptr, int size); + int (*svm_off)(struct kvm *kvm); }; extern struct kvmppc_ops *kvmppc_hv_ops; diff --git a/arch/powerpc/include/asm/nohash/32/kup-8xx.h b/arch/powerpc/include/asm/nohash/32/kup-8xx.h index 1c3133b5f86a..1006a427e99c 100644 --- a/arch/powerpc/include/asm/nohash/32/kup-8xx.h +++ b/arch/powerpc/include/asm/nohash/32/kup-8xx.h @@ -3,6 +3,7 @@ #define _ASM_POWERPC_KUP_8XX_H_ #include <asm/bug.h> +#include <asm/mmu.h> #ifdef CONFIG_PPC_KUAP diff --git a/arch/powerpc/include/asm/nohash/mmu-book3e.h b/arch/powerpc/include/asm/nohash/mmu-book3e.h index 4c9777d256fb..b41004664312 100644 --- a/arch/powerpc/include/asm/nohash/mmu-book3e.h +++ b/arch/powerpc/include/asm/nohash/mmu-book3e.h @@ -75,7 +75,6 @@ #define MAS2_E 0x00000001 #define MAS2_WIMGE_MASK 0x0000001f #define MAS2_EPN_MASK(size) (~0 << (size + 10)) -#define MAS2_VAL(addr, size, flags) ((addr) & MAS2_EPN_MASK(size) | (flags)) #define MAS3_RPN 0xFFFFF000 #define MAS3_U0 0x00000200 @@ -221,6 +220,16 @@ #define TLBILX_T_CLASS2 6 #define TLBILX_T_CLASS3 7 +/* + * The mapping only needs to be cache-coherent on SMP, except on + * Freescale e500mc derivatives where it's also needed for coherent DMA. + */ +#if defined(CONFIG_SMP) || defined(CONFIG_PPC_E500MC) +#define MAS2_M_IF_NEEDED MAS2_M +#else +#define MAS2_M_IF_NEEDED 0 +#endif + #ifndef __ASSEMBLY__ #include <asm/bug.h> diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h index 378e3997845a..c1f25a760eb1 100644 --- a/arch/powerpc/include/asm/opal-api.h +++ b/arch/powerpc/include/asm/opal-api.h @@ -211,7 +211,10 @@ #define OPAL_MPIPL_UPDATE 173 #define OPAL_MPIPL_REGISTER_TAG 174 #define OPAL_MPIPL_QUERY_TAG 175 -#define OPAL_LAST 175 +#define OPAL_SECVAR_GET 176 +#define OPAL_SECVAR_GET_NEXT 177 +#define OPAL_SECVAR_ENQUEUE_UPDATE 178 +#define OPAL_LAST 178 #define QUIESCE_HOLD 1 /* Spin all calls at entry */ #define QUIESCE_REJECT 2 /* Fail all calls with OPAL_BUSY */ diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h index a0cf8fba4d12..9986ac34b8e2 100644 --- a/arch/powerpc/include/asm/opal.h +++ b/arch/powerpc/include/asm/opal.h @@ -298,6 +298,13 @@ int opal_sensor_group_clear(u32 group_hndl, int token); int opal_sensor_group_enable(u32 group_hndl, int token, bool enable); int opal_nx_coproc_init(uint32_t chip_id, uint32_t ct); +int opal_secvar_get(const char *key, uint64_t key_len, u8 *data, + uint64_t *data_size); +int opal_secvar_get_next(const char *key, uint64_t *key_len, + uint64_t key_buf_size); +int opal_secvar_enqueue_update(const char *key, uint64_t key_len, u8 *data, + uint64_t data_size); + s64 opal_mpipl_update(enum opal_mpipl_ops op, u64 src, u64 dest, u64 size); s64 opal_mpipl_register_tag(enum opal_mpipl_tags tag, u64 addr); s64 opal_mpipl_query_tag(enum opal_mpipl_tags tag, u64 *addr); diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h index f6c562acc3f8..7f1fd41e3065 100644 --- a/arch/powerpc/include/asm/page.h +++ b/arch/powerpc/include/asm/page.h @@ -325,6 +325,13 @@ void arch_free_page(struct page *page, int order); struct vm_area_struct; +extern unsigned long kernstart_virt_addr; + +static inline unsigned long kaslr_offset(void) +{ + return kernstart_virt_addr - KERNELBASE; +} + #include <asm-generic/memory_model.h> #endif /* __ASSEMBLY__ */ #include <asm/slice.h> diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h index 4053b2ab427c..0e4ec8cc37b7 100644 --- a/arch/powerpc/include/asm/pgtable.h +++ b/arch/powerpc/include/asm/pgtable.h @@ -157,13 +157,9 @@ static inline bool pgd_is_leaf(pgd_t pgd) #define is_ioremap_addr is_ioremap_addr static inline bool is_ioremap_addr(const void *x) { -#ifdef CONFIG_MMU unsigned long addr = (unsigned long)x; return addr >= IOREMAP_BASE && addr < IOREMAP_END; -#else - return false; -#endif } #endif /* CONFIG_PPC64 */ diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index 75c7e95a321b..1aa46dff0957 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -25,9 +25,7 @@ #include <asm/reg_fsl_emb.h> #endif -#ifdef CONFIG_PPC_8xx #include <asm/reg_8xx.h> -#endif /* CONFIG_PPC_8xx */ #define MSR_SF_LG 63 /* Enable 64 bit mode */ #define MSR_ISF_LG 61 /* Interrupt 64b mode valid on 630 */ @@ -1382,6 +1380,14 @@ static inline void mtmsr_isync(unsigned long val) #define wrtspr(rn) asm volatile("mtspr " __stringify(rn) ",0" : \ : : "memory") +static inline void wrtee(unsigned long val) +{ + if (__builtin_constant_p(val)) + asm volatile("wrteei %0" : : "i" ((val & MSR_EE) ? 1 : 0) : "memory"); + else + asm volatile("wrtee %0" : : "r" (val) : "memory"); +} + extern unsigned long msr_check_and_set(unsigned long bits); extern bool strict_msr_control; extern void __msr_check_and_clear(unsigned long bits); @@ -1396,19 +1402,9 @@ static inline void msr_check_and_clear(unsigned long bits) #define mftb() ({unsigned long rval; \ asm volatile( \ "90: mfspr %0, %2;\n" \ - "97: cmpwi %0,0;\n" \ - " beq- 90b;\n" \ - "99:\n" \ - ".section __ftr_fixup,\"a\"\n" \ - ".align 3\n" \ - "98:\n" \ - " .8byte %1\n" \ - " .8byte %1\n" \ - " .8byte 97b-98b\n" \ - " .8byte 99b-98b\n" \ - " .8byte 0\n" \ - " .8byte 0\n" \ - ".previous" \ + ASM_FTR_IFSET( \ + "97: cmpwi %0,0;\n" \ + " beq- 90b;\n", "", %1) \ : "=r" (rval) \ : "i" (CPU_FTR_CELL_TB_BUG), "i" (SPRN_TBRL) : "cr0"); \ rval;}) diff --git a/arch/powerpc/include/asm/reg_8xx.h b/arch/powerpc/include/asm/reg_8xx.h index 7192eece6c3e..07df35ee8cbc 100644 --- a/arch/powerpc/include/asm/reg_8xx.h +++ b/arch/powerpc/include/asm/reg_8xx.h @@ -5,8 +5,6 @@ #ifndef _ASM_POWERPC_REG_8xx_H #define _ASM_POWERPC_REG_8xx_H -#include <asm/mmu.h> - /* Cache control on the MPC8xx is provided through some additional * special purpose registers. */ @@ -38,7 +36,9 @@ #define SPRN_CMPF 153 #define SPRN_LCTRL1 156 #define SPRN_LCTRL2 157 +#ifdef CONFIG_PPC_8xx #define SPRN_ICTRL 158 +#endif #define SPRN_BAR 159 /* Commands. Only the first few are available to the instruction cache. diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h index 5a9b6eb651b6..d19871763ed4 100644 --- a/arch/powerpc/include/asm/sections.h +++ b/arch/powerpc/include/asm/sections.h @@ -5,8 +5,22 @@ #include <linux/elf.h> #include <linux/uaccess.h> + +#define arch_is_kernel_initmem_freed arch_is_kernel_initmem_freed + #include <asm-generic/sections.h> +extern bool init_mem_is_free; + +static inline int arch_is_kernel_initmem_freed(unsigned long addr) +{ + if (!init_mem_is_free) + return 0; + + return addr >= (unsigned long)__init_begin && + addr < (unsigned long)__init_end; +} + extern char __head_end[]; #ifdef __powerpc64__ diff --git a/arch/powerpc/include/asm/secure_boot.h b/arch/powerpc/include/asm/secure_boot.h new file mode 100644 index 000000000000..a2ff556916c6 --- /dev/null +++ b/arch/powerpc/include/asm/secure_boot.h @@ -0,0 +1,29 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Secure boot definitions + * + * Copyright (C) 2019 IBM Corporation + * Author: Nayna Jain + */ +#ifndef _ASM_POWER_SECURE_BOOT_H +#define _ASM_POWER_SECURE_BOOT_H + +#ifdef CONFIG_PPC_SECURE_BOOT + +bool is_ppc_secureboot_enabled(void); +bool is_ppc_trustedboot_enabled(void); + +#else + +static inline bool is_ppc_secureboot_enabled(void) +{ + return false; +} + +static inline bool is_ppc_trustedboot_enabled(void) +{ + return false; +} + +#endif +#endif diff --git a/arch/powerpc/include/asm/security_features.h b/arch/powerpc/include/asm/security_features.h index 759597bf0fd8..7c05e95a5c44 100644 --- a/arch/powerpc/include/asm/security_features.h +++ b/arch/powerpc/include/asm/security_features.h @@ -9,7 +9,7 @@ #define _ASM_POWERPC_SECURITY_FEATURES_H -extern unsigned long powerpc_security_features; +extern u64 powerpc_security_features; extern bool rfi_flush; /* These are bit flags */ @@ -24,17 +24,17 @@ void setup_stf_barrier(void); void do_stf_barrier_fixups(enum stf_barrier_type types); void setup_count_cache_flush(void); -static inline void security_ftr_set(unsigned long feature) +static inline void security_ftr_set(u64 feature) { powerpc_security_features |= feature; } -static inline void security_ftr_clear(unsigned long feature) +static inline void security_ftr_clear(u64 feature) { powerpc_security_features &= ~feature; } -static inline bool security_ftr_enabled(unsigned long feature) +static inline bool security_ftr_enabled(u64 feature) { return !!(powerpc_security_features & feature); } @@ -81,6 +81,9 @@ static inline bool security_ftr_enabled(unsigned long feature) // Software required to flush count cache on context switch #define SEC_FTR_FLUSH_COUNT_CACHE 0x0000000000000400ull +// Software required to flush link stack on context switch +#define SEC_FTR_FLUSH_LINK_STACK 0x0000000000001000ull + // Features enabled by default #define SEC_FTR_DEFAULT \ diff --git a/arch/powerpc/include/asm/secvar.h b/arch/powerpc/include/asm/secvar.h new file mode 100644 index 000000000000..4cc35b58b986 --- /dev/null +++ b/arch/powerpc/include/asm/secvar.h @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2019 IBM Corporation + * Author: Nayna Jain + * + * PowerPC secure variable operations. + */ +#ifndef SECVAR_OPS_H +#define SECVAR_OPS_H + +#include <linux/types.h> +#include <linux/errno.h> + +extern const struct secvar_operations *secvar_ops; + +struct secvar_operations { + int (*get)(const char *key, uint64_t key_len, u8 *data, + uint64_t *data_size); + int (*get_next)(const char *key, uint64_t *key_len, + uint64_t keybufsize); + int (*set)(const char *key, uint64_t key_len, u8 *data, + uint64_t data_size); +}; + +#ifdef CONFIG_PPC_SECURE_BOOT + +extern void set_secvar_ops(const struct secvar_operations *ops); + +#else + +static inline void set_secvar_ops(const struct secvar_operations *ops) { } + +#endif + +#endif diff --git a/arch/powerpc/include/asm/ultravisor-api.h b/arch/powerpc/include/asm/ultravisor-api.h index 4fcda1d5793d..b66f6db7be6c 100644 --- a/arch/powerpc/include/asm/ultravisor-api.h +++ b/arch/powerpc/include/asm/ultravisor-api.h @@ -26,8 +26,14 @@ #define UV_WRITE_PATE 0xF104 #define UV_RETURN 0xF11C #define UV_ESM 0xF110 +#define UV_REGISTER_MEM_SLOT 0xF120 +#define UV_UNREGISTER_MEM_SLOT 0xF124 +#define UV_PAGE_IN 0xF128 +#define UV_PAGE_OUT 0xF12C #define UV_SHARE_PAGE 0xF130 #define UV_UNSHARE_PAGE 0xF134 #define UV_UNSHARE_ALL_PAGES 0xF140 +#define UV_PAGE_INVAL 0xF138 +#define UV_SVM_TERMINATE 0xF13C #endif /* _ASM_POWERPC_ULTRAVISOR_API_H */ diff --git a/arch/powerpc/include/asm/ultravisor.h b/arch/powerpc/include/asm/ultravisor.h index b1bc2e043ed4..790b0e63681f 100644 --- a/arch/powerpc/include/asm/ultravisor.h +++ b/arch/powerpc/include/asm/ultravisor.h @@ -46,4 +46,40 @@ static inline int uv_unshare_all_pages(void) return ucall_norets(UV_UNSHARE_ALL_PAGES); } +static inline int uv_page_in(u64 lpid, u64 src_ra, u64 dst_gpa, u64 flags, + u64 page_shift) +{ + return ucall_norets(UV_PAGE_IN, lpid, src_ra, dst_gpa, flags, + page_shift); +} + +static inline int uv_page_out(u64 lpid, u64 dst_ra, u64 src_gpa, u64 flags, + u64 page_shift) +{ + return ucall_norets(UV_PAGE_OUT, lpid, dst_ra, src_gpa, flags, + page_shift); +} + +static inline int uv_register_mem_slot(u64 lpid, u64 start_gpa, u64 size, + u64 flags, u64 slotid) +{ + return ucall_norets(UV_REGISTER_MEM_SLOT, lpid, start_gpa, + size, flags, slotid); +} + +static inline int uv_unregister_mem_slot(u64 lpid, u64 slotid) +{ + return ucall_norets(UV_UNREGISTER_MEM_SLOT, lpid, slotid); +} + +static inline int uv_page_inval(u64 lpid, u64 gpa, u64 page_shift) +{ + return ucall_norets(UV_PAGE_INVAL, lpid, gpa, page_shift); +} + +static inline int uv_svm_terminate(u64 lpid) +{ + return ucall_norets(UV_SVM_TERMINATE, lpid); +} + #endif /* _ASM_POWERPC_ULTRAVISOR_H */ diff --git a/arch/powerpc/include/asm/vdso_datapage.h b/arch/powerpc/include/asm/vdso_datapage.h index c61d59ed3b45..40f13f3626d3 100644 --- a/arch/powerpc/include/asm/vdso_datapage.h +++ b/arch/powerpc/include/asm/vdso_datapage.h @@ -81,7 +81,9 @@ struct vdso_data { __u32 stamp_sec_fraction; /* fractional seconds of stamp_xtime */ __s32 wtom_clock_nsec; /* Wall to monotonic clock nsec */ __s64 wtom_clock_sec; /* Wall to monotonic clock sec */ - struct timespec stamp_xtime; /* xtime as at tb_orig_stamp */ + __s64 stamp_xtime_sec; /* xtime secs as at tb_orig_stamp */ + __s64 stamp_xtime_nsec; /* xtime nsecs as at tb_orig_stamp */ + __u32 hrtimer_res; /* hrtimer resolution */ __u32 syscall_map_64[SYSCALL_MAP_SIZE]; /* map of syscalls */ __u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */ }; @@ -101,8 +103,10 @@ struct vdso_data { __u32 tz_dsttime; /* Type of dst correction 0x5C */ __s32 wtom_clock_sec; /* Wall to monotonic clock */ __s32 wtom_clock_nsec; - struct timespec stamp_xtime; /* xtime as at tb_orig_stamp */ + __s32 stamp_xtime_sec; /* xtime seconds as at tb_orig_stamp */ + __s32 stamp_xtime_nsec; /* xtime nsecs as at tb_orig_stamp */ __u32 stamp_sec_fraction; /* fractional seconds of stamp_xtime */ + __u32 hrtimer_res; /* hrtimer resolution */ __u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */ __u32 dcache_block_size; /* L1 d-cache block size */ __u32 icache_block_size; /* L1 i-cache block size */ diff --git a/arch/powerpc/include/uapi/asm/msgbuf.h b/arch/powerpc/include/uapi/asm/msgbuf.h index 2b1b37797a47..7919b2ba41b5 100644 --- a/arch/powerpc/include/uapi/asm/msgbuf.h +++ b/arch/powerpc/include/uapi/asm/msgbuf.h @@ -2,6 +2,8 @@ #ifndef _ASM_POWERPC_MSGBUF_H #define _ASM_POWERPC_MSGBUF_H +#include <asm/ipcbuf.h> + /* * The msqid64_ds structure for the PowerPC architecture. * Note extra padding because this structure is passed back and forth @@ -11,9 +13,9 @@ struct msqid64_ds { struct ipc64_perm msg_perm; #ifdef __powerpc64__ - __kernel_time_t msg_stime; /* last msgsnd time */ - __kernel_time_t msg_rtime; /* last msgrcv time */ - __kernel_time_t msg_ctime; /* last change time */ + long msg_stime; /* last msgsnd time */ + long msg_rtime; /* last msgrcv time */ + long msg_ctime; /* last change time */ #else unsigned long msg_stime_high; unsigned long msg_stime; /* last msgsnd time */ diff --git a/arch/powerpc/include/uapi/asm/sembuf.h b/arch/powerpc/include/uapi/asm/sembuf.h index 3f60946f77e3..85e96ccb5f0f 100644 --- a/arch/powerpc/include/uapi/asm/sembuf.h +++ b/arch/powerpc/include/uapi/asm/sembuf.h @@ -2,6 +2,8 @@ #ifndef _ASM_POWERPC_SEMBUF_H #define _ASM_POWERPC_SEMBUF_H +#include <asm/ipcbuf.h> + /* * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -26,8 +28,8 @@ struct semid64_ds { unsigned long sem_ctime_high; unsigned long sem_ctime; /* last change time */ #else - __kernel_time_t sem_otime; /* last semop time */ - __kernel_time_t sem_ctime; /* last change time */ + long sem_otime; /* last semop time */ + long sem_ctime; /* last change time */ #endif unsigned long sem_nsems; /* no. of semaphores in array */ unsigned long __unused3; diff --git a/arch/powerpc/include/uapi/asm/shmbuf.h b/arch/powerpc/include/uapi/asm/shmbuf.h index b591c4d7e4c5..00422b2f3c63 100644 --- a/arch/powerpc/include/uapi/asm/shmbuf.h +++ b/arch/powerpc/include/uapi/asm/shmbuf.h @@ -22,9 +22,9 @@ struct shmid64_ds { struct ipc64_perm shm_perm; /* operation perms */ #ifdef __powerpc64__ - __kernel_time_t shm_atime; /* last attach time */ - __kernel_time_t shm_dtime; /* last detach time */ - __kernel_time_t shm_ctime; /* last change time */ + long shm_atime; /* last attach time */ + long shm_dtime; /* last detach time */ + long shm_ctime; /* last change time */ #else unsigned long shm_atime_high; unsigned long shm_atime; /* last attach time */ diff --git a/arch/powerpc/include/uapi/asm/spu_info.h b/arch/powerpc/include/uapi/asm/spu_info.h index cabfcbba9eac..45f97150587b 100644 --- a/arch/powerpc/include/uapi/asm/spu_info.h +++ b/arch/powerpc/include/uapi/asm/spu_info.h @@ -5,20 +5,6 @@ * (C) Copyright 2006 IBM Corp. * * Author: Dwayne Grant McConnell <decimal@us.ibm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef _UAPI_SPU_INFO_H diff --git a/arch/powerpc/include/uapi/asm/stat.h b/arch/powerpc/include/uapi/asm/stat.h index afd25f2ff4e8..7871055e5e32 100644 --- a/arch/powerpc/include/uapi/asm/stat.h +++ b/arch/powerpc/include/uapi/asm/stat.h @@ -40,7 +40,7 @@ struct stat { uid_t st_uid; gid_t st_gid; unsigned long st_rdev; - off_t st_size; + long st_size; unsigned long st_blksize; unsigned long st_blocks; unsigned long st_atime; diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index a7ca8fe62368..157b0147921f 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -5,9 +5,6 @@ CFLAGS_ptrace.o += -DUTS_MACHINE='"$(UTS_MACHINE)"' -# Disable clang warning for using setjmp without setjmp.h header -CFLAGS_crash.o += $(call cc-disable-warning, builtin-requires-header) - ifdef CONFIG_PPC64 CFLAGS_prom_init.o += $(NO_MINIMAL_TOC) endif @@ -22,6 +19,8 @@ CFLAGS_btext.o += $(DISABLE_LATENT_ENTROPY_PLUGIN) CFLAGS_prom.o += $(DISABLE_LATENT_ENTROPY_PLUGIN) CFLAGS_prom_init.o += $(call cc-option, -fno-stack-protector) +CFLAGS_prom_init.o += -DDISABLE_BRANCH_PROFILING +CFLAGS_prom_init.o += -ffreestanding ifdef CONFIG_FUNCTION_TRACER # Do not trace early boot code @@ -39,7 +38,6 @@ KASAN_SANITIZE_btext.o := n ifdef CONFIG_KASAN CFLAGS_early_32.o += -DDISABLE_BRANCH_PROFILING CFLAGS_cputable.o += -DDISABLE_BRANCH_PROFILING -CFLAGS_prom_init.o += -DDISABLE_BRANCH_PROFILING CFLAGS_btext.o += -DDISABLE_BRANCH_PROFILING endif @@ -78,9 +76,8 @@ obj-$(CONFIG_EEH) += eeh.o eeh_pe.o eeh_dev.o eeh_cache.o \ eeh_driver.o eeh_event.o eeh_sysfs.o obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o -ifneq ($(CONFIG_FA_DUMP)$(CONFIG_PRESERVE_FA_DUMP),) -obj-y += fadump.o -endif +obj-$(CONFIG_FA_DUMP) += fadump.o +obj-$(CONFIG_PRESERVE_FA_DUMP) += fadump.o ifdef CONFIG_PPC32 obj-$(CONFIG_E500) += idle_e500.o endif @@ -126,14 +123,6 @@ pci64-$(CONFIG_PPC64) += pci_dn.o pci-hotplug.o isa-bridge.o obj-$(CONFIG_PCI) += pci_$(BITS).o $(pci64-y) \ pci-common.o pci_of_scan.o obj-$(CONFIG_PCI_MSI) += msi.o -obj-$(CONFIG_KEXEC_CORE) += machine_kexec.o crash.o \ - machine_kexec_$(BITS).o -obj-$(CONFIG_KEXEC_FILE) += machine_kexec_file_$(BITS).o kexec_elf_$(BITS).o -ifdef CONFIG_HAVE_IMA_KEXEC -ifdef CONFIG_IMA -obj-y += ima_kexec.o -endif -endif obj-$(CONFIG_AUDIT) += audit.o obj64-$(CONFIG_AUDIT) += compat_audit.o @@ -161,16 +150,13 @@ ifneq ($(CONFIG_PPC_POWERNV)$(CONFIG_PPC_SVM),) obj-y += ucall.o endif +obj-$(CONFIG_PPC_SECURE_BOOT) += secure_boot.o ima_arch.o secvar-ops.o +obj-$(CONFIG_PPC_SECVAR_SYSFS) += secvar-sysfs.o + # Disable GCOV, KCOV & sanitizers in odd or sensitive code GCOV_PROFILE_prom_init.o := n KCOV_INSTRUMENT_prom_init.o := n UBSAN_SANITIZE_prom_init.o := n -GCOV_PROFILE_machine_kexec_64.o := n -KCOV_INSTRUMENT_machine_kexec_64.o := n -UBSAN_SANITIZE_machine_kexec_64.o := n -GCOV_PROFILE_machine_kexec_32.o := n -KCOV_INSTRUMENT_machine_kexec_32.o := n -UBSAN_SANITIZE_machine_kexec_32.o := n GCOV_PROFILE_kprobes.o := n KCOV_INSTRUMENT_kprobes.o := n UBSAN_SANITIZE_kprobes.o := n diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 484f54dab247..3d47aec7becf 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -385,28 +385,25 @@ int main(void) OFFSET(CFG_SYSCALL_MAP32, vdso_data, syscall_map_32); OFFSET(WTOM_CLOCK_SEC, vdso_data, wtom_clock_sec); OFFSET(WTOM_CLOCK_NSEC, vdso_data, wtom_clock_nsec); - OFFSET(STAMP_XTIME, vdso_data, stamp_xtime); + OFFSET(STAMP_XTIME_SEC, vdso_data, stamp_xtime_sec); + OFFSET(STAMP_XTIME_NSEC, vdso_data, stamp_xtime_nsec); OFFSET(STAMP_SEC_FRAC, vdso_data, stamp_sec_fraction); + OFFSET(CLOCK_HRTIMER_RES, vdso_data, hrtimer_res); OFFSET(CFG_ICACHE_BLOCKSZ, vdso_data, icache_block_size); OFFSET(CFG_DCACHE_BLOCKSZ, vdso_data, dcache_block_size); OFFSET(CFG_ICACHE_LOGBLOCKSZ, vdso_data, icache_log_block_size); OFFSET(CFG_DCACHE_LOGBLOCKSZ, vdso_data, dcache_log_block_size); #ifdef CONFIG_PPC64 OFFSET(CFG_SYSCALL_MAP64, vdso_data, syscall_map_64); - OFFSET(TVAL64_TV_SEC, timeval, tv_sec); - OFFSET(TVAL64_TV_USEC, timeval, tv_usec); + OFFSET(TVAL64_TV_SEC, __kernel_old_timeval, tv_sec); + OFFSET(TVAL64_TV_USEC, __kernel_old_timeval, tv_usec); +#endif + OFFSET(TSPC64_TV_SEC, __kernel_timespec, tv_sec); + OFFSET(TSPC64_TV_NSEC, __kernel_timespec, tv_nsec); OFFSET(TVAL32_TV_SEC, old_timeval32, tv_sec); OFFSET(TVAL32_TV_USEC, old_timeval32, tv_usec); - OFFSET(TSPC64_TV_SEC, timespec, tv_sec); - OFFSET(TSPC64_TV_NSEC, timespec, tv_nsec); OFFSET(TSPC32_TV_SEC, old_timespec32, tv_sec); OFFSET(TSPC32_TV_NSEC, old_timespec32, tv_nsec); -#else - OFFSET(TVAL32_TV_SEC, timeval, tv_sec); - OFFSET(TVAL32_TV_USEC, timeval, tv_usec); - OFFSET(TSPC32_TV_SEC, timespec, tv_sec); - OFFSET(TSPC32_TV_NSEC, timespec, tv_nsec); -#endif /* timeval/timezone offsets for use by vdso */ OFFSET(TZONE_TZ_MINWEST, timezone, tz_minuteswest); OFFSET(TZONE_TZ_DSTTIME, timezone, tz_dsttime); @@ -417,7 +414,6 @@ int main(void) DEFINE(CLOCK_REALTIME_COARSE, CLOCK_REALTIME_COARSE); DEFINE(CLOCK_MONOTONIC_COARSE, CLOCK_MONOTONIC_COARSE); DEFINE(NSEC_PER_SEC, NSEC_PER_SEC); - DEFINE(CLOCK_REALTIME_RES, MONOTONIC_RES_NSEC); #ifdef CONFIG_BUG DEFINE(BUG_ENTRY_SIZE, sizeof(struct bug_entry)); diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S index 2b4f3ec0acf7..1d308780e0d3 100644 --- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S +++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S @@ -231,7 +231,7 @@ _GLOBAL(__setup_cpu_e5500) blr #endif -/* flush L1 date cache, it can apply to e500v2, e500mc and e5500 */ +/* flush L1 data cache, it can apply to e500v2, e500mc and e5500 */ _GLOBAL(flush_dcache_L1) mfmsr r10 wrteei 0 diff --git a/arch/powerpc/kernel/dawr.c b/arch/powerpc/kernel/dawr.c index 5f66b95b6858..cc14aa6c4a1b 100644 --- a/arch/powerpc/kernel/dawr.c +++ b/arch/powerpc/kernel/dawr.c @@ -30,10 +30,10 @@ int set_dawr(struct arch_hw_breakpoint *brk) * DAWR length is stored in field MDR bits 48:53. Matches range in * doublewords (64 bits) baised by -1 eg. 0b000000=1DW and * 0b111111=64DW. - * brk->len is in bytes. + * brk->hw_len is in bytes. * This aligns up to double word size, shifts and does the bias. */ - mrd = ((brk->len + 7) >> 3) - 1; + mrd = ((brk->hw_len + 7) >> 3) - 1; dawrx |= (mrd & 0x3f) << (63 - 53); if (ppc_md.set_dawr) @@ -54,7 +54,7 @@ static ssize_t dawr_write_file_bool(struct file *file, const char __user *user_buf, size_t count, loff_t *ppos) { - struct arch_hw_breakpoint null_brk = {0, 0, 0}; + struct arch_hw_breakpoint null_brk = {0}; size_t rc; /* Send error to user if they hypervisor won't allow us to write DAWR */ diff --git a/arch/powerpc/kernel/early_32.c b/arch/powerpc/kernel/early_32.c index 3482118ffe76..ef2ad4945904 100644 --- a/arch/powerpc/kernel/early_32.c +++ b/arch/powerpc/kernel/early_32.c @@ -19,10 +19,13 @@ */ notrace unsigned long __init early_init(unsigned long dt_ptr) { - unsigned long offset = reloc_offset(); + unsigned long kva, offset = reloc_offset(); + + kva = *PTRRELOC(&kernstart_virt_addr); /* First zero the BSS */ - memset(PTRRELOC(&__bss_start), 0, __bss_stop - __bss_start); + if (kva == KERNELBASE) + memset(PTRRELOC(&__bss_start), 0, __bss_stop - __bss_start); /* * Identify the CPU type and fix up code sections @@ -32,5 +35,5 @@ notrace unsigned long __init early_init(unsigned long dt_ptr) apply_feature_fixups(); - return KERNELBASE + offset; + return kva + offset; } diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c index d9279d0ee9f5..3dd1a422fc29 100644 --- a/arch/powerpc/kernel/eeh_driver.c +++ b/arch/powerpc/kernel/eeh_driver.c @@ -1,25 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * PCI Error Recovery Driver for RPA-compliant PPC64 platform. * Copyright IBM Corp. 2004 2005 * Copyright Linas Vepstas <linas@linas.org> 2004, 2005 * - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * * Send comments and feedback to Linas Vepstas <linas@austin.ibm.com> */ #include <linux/delay.h> @@ -897,12 +881,12 @@ void eeh_handle_normal_event(struct eeh_pe *pe) /* Log the event */ if (pe->type & EEH_PE_PHB) { - pr_err("EEH: PHB#%x failure detected, location: %s\n", + pr_err("EEH: Recovering PHB#%x, location: %s\n", pe->phb->global_number, eeh_pe_loc_get(pe)); } else { struct eeh_pe *phb_pe = eeh_phb_pe_get(pe->phb); - pr_err("EEH: Frozen PHB#%x-PE#%x detected\n", + pr_err("EEH: Recovering PHB#%x-PE#%x\n", pe->phb->global_number, pe->addr); pr_err("EEH: PE location: %s, PHB location: %s\n", eeh_pe_loc_get(pe), eeh_pe_loc_get(phb_pe)); diff --git a/arch/powerpc/kernel/eeh_sysfs.c b/arch/powerpc/kernel/eeh_sysfs.c index 3fa04dda1737..ab44d965a53c 100644 --- a/arch/powerpc/kernel/eeh_sysfs.c +++ b/arch/powerpc/kernel/eeh_sysfs.c @@ -1,25 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Sysfs entries for PCI Error Recovery for PAPR-compliant platform. * Copyright IBM Corporation 2007 * Copyright Linas Vepstas <linas@austin.ibm.com> 2007 * - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * * Send comments and feedback to Linas Vepstas <linas@austin.ibm.com> */ #include <linux/pci.h> diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 6467bdab8d40..3fd3ef352e3f 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -537,6 +537,7 @@ flush_count_cache: /* Save LR into r9 */ mflr r9 + // Flush the link stack .rept 64 bl .+4 .endr @@ -546,6 +547,11 @@ flush_count_cache: .balign 32 /* Restore LR */ 1: mtlr r9 + + // If we're just flushing the link stack, return here +3: nop + patch_site 3b patch__flush_link_stack_return + li r9,0x7fff mtctr r9 diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S index 829950b96d29..e4076e3c072d 100644 --- a/arch/powerpc/kernel/exceptions-64e.S +++ b/arch/powerpc/kernel/exceptions-64e.S @@ -1346,16 +1346,6 @@ skpinv: addi r6,r6,1 /* Increment */ sync isync -/* - * The mapping only needs to be cache-coherent on SMP, except on - * Freescale e500mc derivatives where it's also needed for coherent DMA. - */ -#if defined(CONFIG_SMP) || defined(CONFIG_PPC_E500MC) -#define M_IF_NEEDED MAS2_M -#else -#define M_IF_NEEDED 0 -#endif - /* 6. Setup KERNELBASE mapping in TLB[0] * * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in @@ -1368,7 +1358,7 @@ skpinv: addi r6,r6,1 /* Increment */ ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_1GB))@l mtspr SPRN_MAS1,r6 - LOAD_REG_IMMEDIATE(r6, PAGE_OFFSET | M_IF_NEEDED) + LOAD_REG_IMMEDIATE(r6, PAGE_OFFSET | MAS2_M_IF_NEEDED) mtspr SPRN_MAS2,r6 rlwinm r5,r5,0,0,25 diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index d0018dd17e0a..46508b148e16 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -514,7 +514,7 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) * If stack=0, then the stack is already set in r1, and r1 is saved in r10. * PPR save and CPU accounting is not done for the !stack case (XXX why not?) */ -.macro INT_COMMON vec, area, stack, kaup, reconcile, dar, dsisr +.macro INT_COMMON vec, area, stack, kuap, reconcile, dar, dsisr .if \stack andi. r10,r12,MSR_PR /* See if coming from user */ mr r10,r1 /* Save r1 */ @@ -533,7 +533,7 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) std r10,GPR1(r1) /* save r1 in stackframe */ .if \stack - .if \kaup + .if \kuap kuap_save_amr_and_lock r9, r10, cr1, cr0 .endif beq 101f /* if from kernel mode */ @@ -541,7 +541,7 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) SAVE_PPR(\area, r9) 101: .else - .if \kaup + .if \kuap kuap_save_amr_and_lock r9, r10, cr1 .endif .endif diff --git a/arch/powerpc/kernel/fadump.c b/arch/powerpc/kernel/fadump.c index ed59855430b9..ff0114aeba9b 100644 --- a/arch/powerpc/kernel/fadump.c +++ b/arch/powerpc/kernel/fadump.c @@ -1466,16 +1466,15 @@ static void fadump_init_files(void) */ int __init setup_fadump(void) { - if (!fw_dump.fadump_enabled) - return 0; - - if (!fw_dump.fadump_supported) { - printk(KERN_ERR "Firmware-assisted dump is not supported on" - " this hardware\n"); + if (!fw_dump.fadump_supported) return 0; - } + fadump_init_files(); fadump_show_config(); + + if (!fw_dump.fadump_enabled) + return 1; + /* * If dump data is available then see if it is valid and prepare for * saving it to the disk. @@ -1492,8 +1491,6 @@ int __init setup_fadump(void) else if (fw_dump.reserve_dump_area_size) fw_dump.ops->fadump_init_mem_struct(&fw_dump); - fadump_init_files(); - return 1; } subsys_initcall(setup_fadump); diff --git a/arch/powerpc/kernel/fsl_booke_entry_mapping.S b/arch/powerpc/kernel/fsl_booke_entry_mapping.S index ea065282b303..8bccce6544b5 100644 --- a/arch/powerpc/kernel/fsl_booke_entry_mapping.S +++ b/arch/powerpc/kernel/fsl_booke_entry_mapping.S @@ -153,35 +153,24 @@ skpinv: addi r6,r6,1 /* Increment */ tlbivax 0,r9 TLBSYNC -/* - * The mapping only needs to be cache-coherent on SMP, except on - * Freescale e500mc derivatives where it's also needed for coherent DMA. - */ -#if defined(CONFIG_SMP) || defined(CONFIG_PPC_E500MC) -#define M_IF_NEEDED MAS2_M -#else -#define M_IF_NEEDED 0 -#endif - #if defined(ENTRY_MAPPING_BOOT_SETUP) -/* 6. Setup KERNELBASE mapping in TLB1[0] */ +/* 6. Setup kernstart_virt_addr mapping in TLB1[0] */ lis r6,0x1000 /* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */ mtspr SPRN_MAS0,r6 lis r6,(MAS1_VALID|MAS1_IPROT)@h ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_64M))@l mtspr SPRN_MAS1,r6 - lis r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_NEEDED)@h - ori r6,r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_NEEDED)@l + lis r6,MAS2_EPN_MASK(BOOK3E_PAGESZ_64M)@h + ori r6,r6,MAS2_EPN_MASK(BOOK3E_PAGESZ_64M)@l + and r6,r6,r20 + ori r6,r6,MAS2_M_IF_NEEDED@l mtspr SPRN_MAS2,r6 mtspr SPRN_MAS3,r8 tlbwe -/* 7. Jump to KERNELBASE mapping */ - lis r6,(KERNELBASE & ~0xfff)@h - ori r6,r6,(KERNELBASE & ~0xfff)@l - rlwinm r7,r25,0,0x03ffffff - add r6,r7,r6 +/* 7. Jump to kernstart_virt_addr mapping */ + mr r6,r20 #elif defined(ENTRY_MAPPING_KEXEC_SETUP) /* diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index adf0505dbe02..6f7a3a7162c5 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -155,6 +155,8 @@ _ENTRY(_start); */ _ENTRY(__early_start) + LOAD_REG_ADDR_PIC(r20, kernstart_virt_addr) + lwz r20,0(r20) #define ENTRY_MAPPING_BOOT_SETUP #include "fsl_booke_entry_mapping.S" @@ -238,6 +240,9 @@ set_ivor: bl early_init +#ifdef CONFIG_KASAN + bl kasan_early_init +#endif #ifdef CONFIG_RELOCATABLE mr r3,r30 mr r4,r31 @@ -264,9 +269,6 @@ set_ivor: /* * Decide what sort of machine this is and initialize the MMU. */ -#ifdef CONFIG_KASAN - bl kasan_early_init -#endif mr r3,r30 mr r4,r31 bl machine_init @@ -277,8 +279,8 @@ set_ivor: ori r6, r6, swapper_pg_dir@l lis r5, abatron_pteptrs@h ori r5, r5, abatron_pteptrs@l - lis r4, KERNELBASE@h - ori r4, r4, KERNELBASE@l + lis r3, kernstart_virt_addr@ha + lwz r4, kernstart_virt_addr@l(r3) stw r5, 0(r4) /* Save abatron_pteptrs at a fixed location */ stw r6, 0(r5) @@ -1067,7 +1069,12 @@ __secondary_start: mr r5,r25 /* phys kernel start */ rlwinm r5,r5,0,~0x3ffffff /* aligned 64M */ subf r4,r5,r4 /* memstart_addr - phys kernel start */ - li r5,0 /* no device tree */ + lis r7,KERNELBASE@h + ori r7,r7,KERNELBASE@l + cmpw r20,r7 /* if kernstart_virt_addr != KERNELBASE, randomized */ + beq 2f + li r4,0 +2: li r5,0 /* no device tree */ li r6,0 /* not boot cpu */ bl restore_to_as0 @@ -1115,6 +1122,54 @@ __secondary_hold_acknowledge: #endif /* + * Create a 64M tlb by address and entry + * r3 - entry + * r4 - virtual address + * r5/r6 - physical address + */ +_GLOBAL(create_kaslr_tlb_entry) + lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */ + rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r6) */ + mtspr SPRN_MAS0,r7 /* Write MAS0 */ + + lis r3,(MAS1_VALID|MAS1_IPROT)@h + ori r3,r3,(MAS1_TSIZE(BOOK3E_PAGESZ_64M))@l + mtspr SPRN_MAS1,r3 /* Write MAS1 */ + + lis r3,MAS2_EPN_MASK(BOOK3E_PAGESZ_64M)@h + ori r3,r3,MAS2_EPN_MASK(BOOK3E_PAGESZ_64M)@l + and r3,r3,r4 + ori r3,r3,MAS2_M_IF_NEEDED@l + mtspr SPRN_MAS2,r3 /* Write MAS2(EPN) */ + +#ifdef CONFIG_PHYS_64BIT + ori r8,r6,(MAS3_SW|MAS3_SR|MAS3_SX) + mtspr SPRN_MAS3,r8 /* Write MAS3(RPN) */ + mtspr SPRN_MAS7,r5 +#else + ori r8,r5,(MAS3_SW|MAS3_SR|MAS3_SX) + mtspr SPRN_MAS3,r8 /* Write MAS3(RPN) */ +#endif + + tlbwe /* Write TLB */ + isync + sync + blr + +/* + * Return to the start of the relocated kernel and run again + * r3 - virtual address of fdt + * r4 - entry of the kernel + */ +_GLOBAL(reloc_kernel_entry) + mfmsr r7 + rlwinm r7, r7, 0, ~(MSR_IS | MSR_DS) + + mtspr SPRN_SRR0,r4 + mtspr SPRN_SRR1,r7 + rfi + +/* * Create a tlb entry with the same effective and physical address as * the tlb entry used by the current running code. But set the TS to 1. * Then switch to the address space 1. It will return with the r3 set to diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c index 1007ec36b4cb..58ce3d37c2a3 100644 --- a/arch/powerpc/kernel/hw_breakpoint.c +++ b/arch/powerpc/kernel/hw_breakpoint.c @@ -127,15 +127,58 @@ int arch_bp_generic_fields(int type, int *gen_bp_type) } /* + * Watchpoint match range is always doubleword(8 bytes) aligned on + * powerpc. If the given range is crossing doubleword boundary, we + * need to increase the length such that next doubleword also get + * covered. Ex, + * + * address len = 6 bytes + * |=========. + * |------------v--|------v--------| + * | | | | | | | | | | | | | | | | | + * |---------------|---------------| + * <---8 bytes---> + * + * In this case, we should configure hw as: + * start_addr = address & ~HW_BREAKPOINT_ALIGN + * len = 16 bytes + * + * @start_addr and @end_addr are inclusive. + */ +static int hw_breakpoint_validate_len(struct arch_hw_breakpoint *hw) +{ + u16 max_len = DABR_MAX_LEN; + u16 hw_len; + unsigned long start_addr, end_addr; + + start_addr = hw->address & ~HW_BREAKPOINT_ALIGN; + end_addr = (hw->address + hw->len - 1) | HW_BREAKPOINT_ALIGN; + hw_len = end_addr - start_addr + 1; + + if (dawr_enabled()) { + max_len = DAWR_MAX_LEN; + /* DAWR region can't cross 512 bytes boundary */ + if ((start_addr >> 9) != (end_addr >> 9)) + return -EINVAL; + } + + if (hw_len > max_len) + return -EINVAL; + + hw->hw_len = hw_len; + return 0; +} + +/* * Validate the arch-specific HW Breakpoint register settings */ int hw_breakpoint_arch_parse(struct perf_event *bp, const struct perf_event_attr *attr, struct arch_hw_breakpoint *hw) { - int ret = -EINVAL, length_max; + int ret = -EINVAL; - if (!bp) + if (!bp || !attr->bp_len) return ret; hw->type = HW_BRK_TYPE_TRANSLATE; @@ -155,26 +198,10 @@ int hw_breakpoint_arch_parse(struct perf_event *bp, hw->address = attr->bp_addr; hw->len = attr->bp_len; - /* - * Since breakpoint length can be a maximum of HW_BREAKPOINT_LEN(8) - * and breakpoint addresses are aligned to nearest double-word - * HW_BREAKPOINT_ALIGN by rounding off to the lower address, the - * 'symbolsize' should satisfy the check below. - */ if (!ppc_breakpoint_available()) return -ENODEV; - length_max = 8; /* DABR */ - if (dawr_enabled()) { - length_max = 512 ; /* 64 doublewords */ - /* DAWR region can't cross 512 boundary */ - if ((attr->bp_addr >> 9) != - ((attr->bp_addr + attr->bp_len - 1) >> 9)) - return -EINVAL; - } - if (hw->len > - (length_max - (hw->address & HW_BREAKPOINT_ALIGN))) - return -EINVAL; - return 0; + + return hw_breakpoint_validate_len(hw); } /* @@ -195,33 +222,49 @@ void thread_change_pc(struct task_struct *tsk, struct pt_regs *regs) tsk->thread.last_hit_ubp = NULL; } -static bool is_larx_stcx_instr(struct pt_regs *regs, unsigned int instr) +static bool dar_within_range(unsigned long dar, struct arch_hw_breakpoint *info) { - int ret, type; - struct instruction_op op; + return ((info->address <= dar) && (dar - info->address < info->len)); +} - ret = analyse_instr(&op, regs, instr); - type = GETTYPE(op.type); - return (!ret && (type == LARX || type == STCX)); +static bool +dar_range_overlaps(unsigned long dar, int size, struct arch_hw_breakpoint *info) +{ + return ((dar <= info->address + info->len - 1) && + (dar + size - 1 >= info->address)); } /* * Handle debug exception notifications. */ static bool stepping_handler(struct pt_regs *regs, struct perf_event *bp, - unsigned long addr) + struct arch_hw_breakpoint *info) { unsigned int instr = 0; + int ret, type, size; + struct instruction_op op; + unsigned long addr = info->address; if (__get_user_inatomic(instr, (unsigned int *)regs->nip)) goto fail; - if (is_larx_stcx_instr(regs, instr)) { + ret = analyse_instr(&op, regs, instr); + type = GETTYPE(op.type); + size = GETSIZE(op.type); + + if (!ret && (type == LARX || type == STCX)) { printk_ratelimited("Breakpoint hit on instruction that can't be emulated." " Breakpoint at 0x%lx will be disabled.\n", addr); goto disable; } + /* + * If it's extraneous event, we still need to emulate/single- + * step the instruction, but we don't generate an event. + */ + if (size && !dar_range_overlaps(regs->dar, size, info)) + info->type |= HW_BRK_TYPE_EXTRANEOUS_IRQ; + /* Do not emulate user-space instructions, instead single-step them */ if (user_mode(regs)) { current->thread.last_hit_ubp = bp; @@ -253,7 +296,6 @@ int hw_breakpoint_handler(struct die_args *args) struct perf_event *bp; struct pt_regs *regs = args->regs; struct arch_hw_breakpoint *info; - unsigned long dar = regs->dar; /* Disable breakpoints during exception handling */ hw_breakpoint_disable(); @@ -285,19 +327,14 @@ int hw_breakpoint_handler(struct die_args *args) goto out; } - /* - * Verify if dar lies within the address range occupied by the symbol - * being watched to filter extraneous exceptions. If it doesn't, - * we still need to single-step the instruction, but we don't - * generate an event. - */ info->type &= ~HW_BRK_TYPE_EXTRANEOUS_IRQ; - if (!((bp->attr.bp_addr <= dar) && - (dar - bp->attr.bp_addr < bp->attr.bp_len))) - info->type |= HW_BRK_TYPE_EXTRANEOUS_IRQ; - - if (!IS_ENABLED(CONFIG_PPC_8xx) && !stepping_handler(regs, bp, info->address)) - goto out; + if (IS_ENABLED(CONFIG_PPC_8xx)) { + if (!dar_within_range(regs->dar, info)) + info->type |= HW_BRK_TYPE_EXTRANEOUS_IRQ; + } else { + if (!stepping_handler(regs, bp, info)) + goto out; + } /* * As a policy, the callback is invoked in a 'trigger-after-execute' diff --git a/arch/powerpc/kernel/ima_arch.c b/arch/powerpc/kernel/ima_arch.c new file mode 100644 index 000000000000..e34116255ced --- /dev/null +++ b/arch/powerpc/kernel/ima_arch.c @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 IBM Corporation + * Author: Nayna Jain + */ + +#include <linux/ima.h> +#include <asm/secure_boot.h> + +bool arch_ima_get_secureboot(void) +{ + return is_ppc_secureboot_enabled(); +} + +/* + * The "secure_rules" are enabled only on "secureboot" enabled systems. + * These rules verify the file signatures against known good values. + * The "appraise_type=imasig|modsig" option allows the known good signature + * to be stored as an xattr or as an appended signature. + * + * To avoid duplicate signature verification as much as possible, the IMA + * policy rule for module appraisal is added only if CONFIG_MODULE_SIG_FORCE + * is not enabled. + */ +static const char *const secure_rules[] = { + "appraise func=KEXEC_KERNEL_CHECK appraise_flag=check_blacklist appraise_type=imasig|modsig", +#ifndef CONFIG_MODULE_SIG_FORCE + "appraise func=MODULE_CHECK appraise_flag=check_blacklist appraise_type=imasig|modsig", +#endif + NULL +}; + +/* + * The "trusted_rules" are enabled only on "trustedboot" enabled systems. + * These rules add the kexec kernel image and kernel modules file hashes to + * the IMA measurement list. + */ +static const char *const trusted_rules[] = { + "measure func=KEXEC_KERNEL_CHECK", + "measure func=MODULE_CHECK", + NULL +}; + +/* + * The "secure_and_trusted_rules" contains rules for both the secure boot and + * trusted boot. The "template=ima-modsig" option includes the appended + * signature, when available, in the IMA measurement list. + */ +static const char *const secure_and_trusted_rules[] = { + "measure func=KEXEC_KERNEL_CHECK template=ima-modsig", + "measure func=MODULE_CHECK template=ima-modsig", + "appraise func=KEXEC_KERNEL_CHECK appraise_flag=check_blacklist appraise_type=imasig|modsig", +#ifndef CONFIG_MODULE_SIG_FORCE + "appraise func=MODULE_CHECK appraise_flag=check_blacklist appraise_type=imasig|modsig", +#endif + NULL +}; + +/* + * Returns the relevant IMA arch-specific policies based on the system secure + * boot state. + */ +const char *const *arch_get_ima_policy(void) +{ + if (is_ppc_secureboot_enabled()) { + if (IS_ENABLED(CONFIG_MODULE_SIG)) + set_module_sig_enforced(); + + if (is_ppc_trustedboot_enabled()) + return secure_and_trusted_rules; + else + return secure_rules; + } else if (is_ppc_trustedboot_enabled()) { + return trusted_rules; + } + + return NULL; +} diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 82df4b09e79f..d80212be8698 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -6,11 +6,6 @@ * Largely rewritten by Cort Dougan (cort@cs.nmt.edu) * and Paul Mackerras. * - * kexec bits: - * Copyright (C) 2002-2003 Eric Biederman <ebiederm@xmission.com> - * GameCube/ppc32 port Copyright (C) 2004 Albert Herranz - * PPC44x port. Copyright (C) 2011, IBM Corporation - * Author: Suzuki Poulose <suzuki@in.ibm.com> */ #include <linux/sys.h> @@ -25,7 +20,6 @@ #include <asm/thread_info.h> #include <asm/asm-offsets.h> #include <asm/processor.h> -#include <asm/kexec.h> #include <asm/bug.h> #include <asm/ptrace.h> #include <asm/export.h> @@ -317,126 +311,6 @@ EXPORT_SYMBOL(flush_instruction_cache) #endif /* CONFIG_PPC_8xx */ /* - * Write any modified data cache blocks out to memory - * and invalidate the corresponding instruction cache blocks. - * This is a no-op on the 601. - * - * flush_icache_range(unsigned long start, unsigned long stop) - */ -_GLOBAL(flush_icache_range) -#if defined(CONFIG_PPC_BOOK3S_601) || defined(CONFIG_E200) - PURGE_PREFETCHED_INS - blr /* for 601 and e200, do nothing */ -#else - rlwinm r3,r3,0,0,31 - L1_CACHE_SHIFT - subf r4,r3,r4 - addi r4,r4,L1_CACHE_BYTES - 1 - srwi. r4,r4,L1_CACHE_SHIFT - beqlr - mtctr r4 - mr r6,r3 -1: dcbst 0,r3 - addi r3,r3,L1_CACHE_BYTES - bdnz 1b - sync /* wait for dcbst's to get to ram */ -#ifndef CONFIG_44x - mtctr r4 -2: icbi 0,r6 - addi r6,r6,L1_CACHE_BYTES - bdnz 2b -#else - /* Flash invalidate on 44x because we are passed kmapped addresses and - this doesn't work for userspace pages due to the virtually tagged - icache. Sigh. */ - iccci 0, r0 -#endif - sync /* additional sync needed on g4 */ - isync - blr -#endif -_ASM_NOKPROBE_SYMBOL(flush_icache_range) -EXPORT_SYMBOL(flush_icache_range) - -/* - * Flush a particular page from the data cache to RAM. - * Note: this is necessary because the instruction cache does *not* - * snoop from the data cache. - * This is a no-op on the 601 and e200 which have a unified cache. - * - * void __flush_dcache_icache(void *page) - */ -_GLOBAL(__flush_dcache_icache) -#if defined(CONFIG_PPC_BOOK3S_601) || defined(CONFIG_E200) - PURGE_PREFETCHED_INS - blr -#else - rlwinm r3,r3,0,0,31-PAGE_SHIFT /* Get page base address */ - li r4,PAGE_SIZE/L1_CACHE_BYTES /* Number of lines in a page */ - mtctr r4 - mr r6,r3 -0: dcbst 0,r3 /* Write line to ram */ - addi r3,r3,L1_CACHE_BYTES - bdnz 0b - sync -#ifdef CONFIG_44x - /* We don't flush the icache on 44x. Those have a virtual icache - * and we don't have access to the virtual address here (it's - * not the page vaddr but where it's mapped in user space). The - * flushing of the icache on these is handled elsewhere, when - * a change in the address space occurs, before returning to - * user space - */ -BEGIN_MMU_FTR_SECTION - blr -END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_44x) -#endif /* CONFIG_44x */ - mtctr r4 -1: icbi 0,r6 - addi r6,r6,L1_CACHE_BYTES - bdnz 1b - sync - isync - blr -#endif - -#ifndef CONFIG_BOOKE -/* - * Flush a particular page from the data cache to RAM, identified - * by its physical address. We turn off the MMU so we can just use - * the physical address (this may be a highmem page without a kernel - * mapping). - * - * void __flush_dcache_icache_phys(unsigned long physaddr) - */ -_GLOBAL(__flush_dcache_icache_phys) -#if defined(CONFIG_PPC_BOOK3S_601) || defined(CONFIG_E200) - PURGE_PREFETCHED_INS - blr /* for 601 and e200, do nothing */ -#else - mfmsr r10 - rlwinm r0,r10,0,28,26 /* clear DR */ - mtmsr r0 - isync - rlwinm r3,r3,0,0,31-PAGE_SHIFT /* Get page base address */ - li r4,PAGE_SIZE/L1_CACHE_BYTES /* Number of lines in a page */ - mtctr r4 - mr r6,r3 -0: dcbst 0,r3 /* Write line to ram */ - addi r3,r3,L1_CACHE_BYTES - bdnz 0b - sync - mtctr r4 -1: icbi 0,r6 - addi r6,r6,L1_CACHE_BYTES - bdnz 1b - sync - mtmsr r10 /* restore DR */ - isync - blr -#endif -#endif /* CONFIG_BOOKE */ - -/* * Copy a whole page. We use the dcbz instruction on the destination * to reduce memory traffic (it eliminates the unnecessary reads of * the destination into cache). This requires that the destination @@ -614,488 +488,3 @@ _GLOBAL(start_secondary_resume) */ _GLOBAL(__main) blr - -#ifdef CONFIG_KEXEC_CORE - /* - * Must be relocatable PIC code callable as a C function. - */ - .globl relocate_new_kernel -relocate_new_kernel: - /* r3 = page_list */ - /* r4 = reboot_code_buffer */ - /* r5 = start_address */ - -#ifdef CONFIG_FSL_BOOKE - - mr r29, r3 - mr r30, r4 - mr r31, r5 - -#define ENTRY_MAPPING_KEXEC_SETUP -#include "fsl_booke_entry_mapping.S" -#undef ENTRY_MAPPING_KEXEC_SETUP - - mr r3, r29 - mr r4, r30 - mr r5, r31 - - li r0, 0 -#elif defined(CONFIG_44x) - - /* Save our parameters */ - mr r29, r3 - mr r30, r4 - mr r31, r5 - -#ifdef CONFIG_PPC_47x - /* Check for 47x cores */ - mfspr r3,SPRN_PVR - srwi r3,r3,16 - cmplwi cr0,r3,PVR_476FPE@h - beq setup_map_47x - cmplwi cr0,r3,PVR_476@h - beq setup_map_47x - cmplwi cr0,r3,PVR_476_ISS@h - beq setup_map_47x -#endif /* CONFIG_PPC_47x */ - -/* - * Code for setting up 1:1 mapping for PPC440x for KEXEC - * - * We cannot switch off the MMU on PPC44x. - * So we: - * 1) Invalidate all the mappings except the one we are running from. - * 2) Create a tmp mapping for our code in the other address space(TS) and - * jump to it. Invalidate the entry we started in. - * 3) Create a 1:1 mapping for 0-2GiB in chunks of 256M in original TS. - * 4) Jump to the 1:1 mapping in original TS. - * 5) Invalidate the tmp mapping. - * - * - Based on the kexec support code for FSL BookE - * - */ - - /* - * Load the PID with kernel PID (0). - * Also load our MSR_IS and TID to MMUCR for TLB search. - */ - li r3, 0 - mtspr SPRN_PID, r3 - mfmsr r4 - andi. r4,r4,MSR_IS@l - beq wmmucr - oris r3,r3,PPC44x_MMUCR_STS@h -wmmucr: - mtspr SPRN_MMUCR,r3 - sync - - /* - * Invalidate all the TLB entries except the current entry - * where we are running from - */ - bl 0f /* Find our address */ -0: mflr r5 /* Make it accessible */ - tlbsx r23,0,r5 /* Find entry we are in */ - li r4,0 /* Start at TLB entry 0 */ - li r3,0 /* Set PAGEID inval value */ -1: cmpw r23,r4 /* Is this our entry? */ - beq skip /* If so, skip the inval */ - tlbwe r3,r4,PPC44x_TLB_PAGEID /* If not, inval the entry */ -skip: - addi r4,r4,1 /* Increment */ - cmpwi r4,64 /* Are we done? */ - bne 1b /* If not, repeat */ - isync - - /* Create a temp mapping and jump to it */ - andi. r6, r23, 1 /* Find the index to use */ - addi r24, r6, 1 /* r24 will contain 1 or 2 */ - - mfmsr r9 /* get the MSR */ - rlwinm r5, r9, 27, 31, 31 /* Extract the MSR[IS] */ - xori r7, r5, 1 /* Use the other address space */ - - /* Read the current mapping entries */ - tlbre r3, r23, PPC44x_TLB_PAGEID - tlbre r4, r23, PPC44x_TLB_XLAT - tlbre r5, r23, PPC44x_TLB_ATTRIB - - /* Save our current XLAT entry */ - mr r25, r4 - - /* Extract the TLB PageSize */ - li r10, 1 /* r10 will hold PageSize */ - rlwinm r11, r3, 0, 24, 27 /* bits 24-27 */ - - /* XXX: As of now we use 256M, 4K pages */ - cmpwi r11, PPC44x_TLB_256M - bne tlb_4k - rotlwi r10, r10, 28 /* r10 = 256M */ - b write_out -tlb_4k: - cmpwi r11, PPC44x_TLB_4K - bne default - rotlwi r10, r10, 12 /* r10 = 4K */ - b write_out -default: - rotlwi r10, r10, 10 /* r10 = 1K */ - -write_out: - /* - * Write out the tmp 1:1 mapping for this code in other address space - * Fixup EPN = RPN , TS=other address space - */ - insrwi r3, r7, 1, 23 /* Bit 23 is TS for PAGEID field */ - - /* Write out the tmp mapping entries */ - tlbwe r3, r24, PPC44x_TLB_PAGEID - tlbwe r4, r24, PPC44x_TLB_XLAT - tlbwe r5, r24, PPC44x_TLB_ATTRIB - - subi r11, r10, 1 /* PageOffset Mask = PageSize - 1 */ - not r10, r11 /* Mask for PageNum */ - - /* Switch to other address space in MSR */ - insrwi r9, r7, 1, 26 /* Set MSR[IS] = r7 */ - - bl 1f -1: mflr r8 - addi r8, r8, (2f-1b) /* Find the target offset */ - - /* Jump to the tmp mapping */ - mtspr SPRN_SRR0, r8 - mtspr SPRN_SRR1, r9 - rfi - -2: - /* Invalidate the entry we were executing from */ - li r3, 0 - tlbwe r3, r23, PPC44x_TLB_PAGEID - - /* attribute fields. rwx for SUPERVISOR mode */ - li r5, 0 - ori r5, r5, (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G) - - /* Create 1:1 mapping in 256M pages */ - xori r7, r7, 1 /* Revert back to Original TS */ - - li r8, 0 /* PageNumber */ - li r6, 3 /* TLB Index, start at 3 */ - -next_tlb: - rotlwi r3, r8, 28 /* Create EPN (bits 0-3) */ - mr r4, r3 /* RPN = EPN */ - ori r3, r3, (PPC44x_TLB_VALID | PPC44x_TLB_256M) /* SIZE = 256M, Valid */ - insrwi r3, r7, 1, 23 /* Set TS from r7 */ - - tlbwe r3, r6, PPC44x_TLB_PAGEID /* PageID field : EPN, V, SIZE */ - tlbwe r4, r6, PPC44x_TLB_XLAT /* Address translation : RPN */ - tlbwe r5, r6, PPC44x_TLB_ATTRIB /* Attributes */ - - addi r8, r8, 1 /* Increment PN */ - addi r6, r6, 1 /* Increment TLB Index */ - cmpwi r8, 8 /* Are we done ? */ - bne next_tlb - isync - - /* Jump to the new mapping 1:1 */ - li r9,0 - insrwi r9, r7, 1, 26 /* Set MSR[IS] = r7 */ - - bl 1f -1: mflr r8 - and r8, r8, r11 /* Get our offset within page */ - addi r8, r8, (2f-1b) - - and r5, r25, r10 /* Get our target PageNum */ - or r8, r8, r5 /* Target jump address */ - - mtspr SPRN_SRR0, r8 - mtspr SPRN_SRR1, r9 - rfi -2: - /* Invalidate the tmp entry we used */ - li r3, 0 - tlbwe r3, r24, PPC44x_TLB_PAGEID - sync - b ppc44x_map_done - -#ifdef CONFIG_PPC_47x - - /* 1:1 mapping for 47x */ - -setup_map_47x: - - /* - * Load the kernel pid (0) to PID and also to MMUCR[TID]. - * Also set the MSR IS->MMUCR STS - */ - li r3, 0 - mtspr SPRN_PID, r3 /* Set PID */ - mfmsr r4 /* Get MSR */ - andi. r4, r4, MSR_IS@l /* TS=1? */ - beq 1f /* If not, leave STS=0 */ - oris r3, r3, PPC47x_MMUCR_STS@h /* Set STS=1 */ -1: mtspr SPRN_MMUCR, r3 /* Put MMUCR */ - sync - - /* Find the entry we are running from */ - bl 2f -2: mflr r23 - tlbsx r23, 0, r23 - tlbre r24, r23, 0 /* TLB Word 0 */ - tlbre r25, r23, 1 /* TLB Word 1 */ - tlbre r26, r23, 2 /* TLB Word 2 */ - - - /* - * Invalidates all the tlb entries by writing to 256 RPNs(r4) - * of 4k page size in all 4 ways (0-3 in r3). - * This would invalidate the entire UTLB including the one we are - * running from. However the shadow TLB entries would help us - * to continue the execution, until we flush them (rfi/isync). - */ - addis r3, 0, 0x8000 /* specify the way */ - addi r4, 0, 0 /* TLB Word0 = (EPN=0, VALID = 0) */ - addi r5, 0, 0 - b clear_utlb_entry - - /* Align the loop to speed things up. from head_44x.S */ - .align 6 - -clear_utlb_entry: - - tlbwe r4, r3, 0 - tlbwe r5, r3, 1 - tlbwe r5, r3, 2 - addis r3, r3, 0x2000 /* Increment the way */ - cmpwi r3, 0 - bne clear_utlb_entry - addis r3, 0, 0x8000 - addis r4, r4, 0x100 /* Increment the EPN */ - cmpwi r4, 0 - bne clear_utlb_entry - - /* Create the entries in the other address space */ - mfmsr r5 - rlwinm r7, r5, 27, 31, 31 /* Get the TS (Bit 26) from MSR */ - xori r7, r7, 1 /* r7 = !TS */ - - insrwi r24, r7, 1, 21 /* Change the TS in the saved TLB word 0 */ - - /* - * write out the TLB entries for the tmp mapping - * Use way '0' so that we could easily invalidate it later. - */ - lis r3, 0x8000 /* Way '0' */ - - tlbwe r24, r3, 0 - tlbwe r25, r3, 1 - tlbwe r26, r3, 2 - - /* Update the msr to the new TS */ - insrwi r5, r7, 1, 26 - - bl 1f -1: mflr r6 - addi r6, r6, (2f-1b) - - mtspr SPRN_SRR0, r6 - mtspr SPRN_SRR1, r5 - rfi - - /* - * Now we are in the tmp address space. - * Create a 1:1 mapping for 0-2GiB in the original TS. - */ -2: - li r3, 0 - li r4, 0 /* TLB Word 0 */ - li r5, 0 /* TLB Word 1 */ - li r6, 0 - ori r6, r6, PPC47x_TLB2_S_RWX /* TLB word 2 */ - - li r8, 0 /* PageIndex */ - - xori r7, r7, 1 /* revert back to original TS */ - -write_utlb: - rotlwi r5, r8, 28 /* RPN = PageIndex * 256M */ - /* ERPN = 0 as we don't use memory above 2G */ - - mr r4, r5 /* EPN = RPN */ - ori r4, r4, (PPC47x_TLB0_VALID | PPC47x_TLB0_256M) - insrwi r4, r7, 1, 21 /* Insert the TS to Word 0 */ - - tlbwe r4, r3, 0 /* Write out the entries */ - tlbwe r5, r3, 1 - tlbwe r6, r3, 2 - addi r8, r8, 1 - cmpwi r8, 8 /* Have we completed ? */ - bne write_utlb - - /* make sure we complete the TLB write up */ - isync - - /* - * Prepare to jump to the 1:1 mapping. - * 1) Extract page size of the tmp mapping - * DSIZ = TLB_Word0[22:27] - * 2) Calculate the physical address of the address - * to jump to. - */ - rlwinm r10, r24, 0, 22, 27 - - cmpwi r10, PPC47x_TLB0_4K - bne 0f - li r10, 0x1000 /* r10 = 4k */ - bl 1f - -0: - /* Defaults to 256M */ - lis r10, 0x1000 - - bl 1f -1: mflr r4 - addi r4, r4, (2f-1b) /* virtual address of 2f */ - - subi r11, r10, 1 /* offsetmask = Pagesize - 1 */ - not r10, r11 /* Pagemask = ~(offsetmask) */ - - and r5, r25, r10 /* Physical page */ - and r6, r4, r11 /* offset within the current page */ - - or r5, r5, r6 /* Physical address for 2f */ - - /* Switch the TS in MSR to the original one */ - mfmsr r8 - insrwi r8, r7, 1, 26 - - mtspr SPRN_SRR1, r8 - mtspr SPRN_SRR0, r5 - rfi - -2: - /* Invalidate the tmp mapping */ - lis r3, 0x8000 /* Way '0' */ - - clrrwi r24, r24, 12 /* Clear the valid bit */ - tlbwe r24, r3, 0 - tlbwe r25, r3, 1 - tlbwe r26, r3, 2 - - /* Make sure we complete the TLB write and flush the shadow TLB */ - isync - -#endif - -ppc44x_map_done: - - - /* Restore the parameters */ - mr r3, r29 - mr r4, r30 - mr r5, r31 - - li r0, 0 -#else - li r0, 0 - - /* - * Set Machine Status Register to a known status, - * switch the MMU off and jump to 1: in a single step. - */ - - mr r8, r0 - ori r8, r8, MSR_RI|MSR_ME - mtspr SPRN_SRR1, r8 - addi r8, r4, 1f - relocate_new_kernel - mtspr SPRN_SRR0, r8 - sync - rfi - -1: -#endif - /* from this point address translation is turned off */ - /* and interrupts are disabled */ - - /* set a new stack at the bottom of our page... */ - /* (not really needed now) */ - addi r1, r4, KEXEC_CONTROL_PAGE_SIZE - 8 /* for LR Save+Back Chain */ - stw r0, 0(r1) - - /* Do the copies */ - li r6, 0 /* checksum */ - mr r0, r3 - b 1f - -0: /* top, read another word for the indirection page */ - lwzu r0, 4(r3) - -1: - /* is it a destination page? (r8) */ - rlwinm. r7, r0, 0, 31, 31 /* IND_DESTINATION (1<<0) */ - beq 2f - - rlwinm r8, r0, 0, 0, 19 /* clear kexec flags, page align */ - b 0b - -2: /* is it an indirection page? (r3) */ - rlwinm. r7, r0, 0, 30, 30 /* IND_INDIRECTION (1<<1) */ - beq 2f - - rlwinm r3, r0, 0, 0, 19 /* clear kexec flags, page align */ - subi r3, r3, 4 - b 0b - -2: /* are we done? */ - rlwinm. r7, r0, 0, 29, 29 /* IND_DONE (1<<2) */ - beq 2f - b 3f - -2: /* is it a source page? (r9) */ - rlwinm. r7, r0, 0, 28, 28 /* IND_SOURCE (1<<3) */ - beq 0b - - rlwinm r9, r0, 0, 0, 19 /* clear kexec flags, page align */ - - li r7, PAGE_SIZE / 4 - mtctr r7 - subi r9, r9, 4 - subi r8, r8, 4 -9: - lwzu r0, 4(r9) /* do the copy */ - xor r6, r6, r0 - stwu r0, 4(r8) - dcbst 0, r8 - sync - icbi 0, r8 - bdnz 9b - - addi r9, r9, 4 - addi r8, r8, 4 - b 0b - -3: - - /* To be certain of avoiding problems with self-modifying code - * execute a serializing instruction here. - */ - isync - sync - - mfspr r3, SPRN_PIR /* current core we are running on */ - mr r4, r5 /* load physical address of chunk called */ - - /* jump to the entry point, usually the setup routine */ - mtlr r5 - blrl - -1: b 1b - -relocate_new_kernel_end: - - .globl relocate_new_kernel_size -relocate_new_kernel_size: - .long relocate_new_kernel_end - relocate_new_kernel -#endif diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index b55a7b4cb543..1864605eca29 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -49,108 +49,6 @@ _GLOBAL(call_do_irq) mtlr r0 blr - .section ".toc","aw" -PPC64_CACHES: - .tc ppc64_caches[TC],ppc64_caches - .section ".text" - -/* - * Write any modified data cache blocks out to memory - * and invalidate the corresponding instruction cache blocks. - * - * flush_icache_range(unsigned long start, unsigned long stop) - * - * flush all bytes from start through stop-1 inclusive - */ - -_GLOBAL_TOC(flush_icache_range) -BEGIN_FTR_SECTION - PURGE_PREFETCHED_INS - blr -END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE) -/* - * Flush the data cache to memory - * - * Different systems have different cache line sizes - * and in some cases i-cache and d-cache line sizes differ from - * each other. - */ - ld r10,PPC64_CACHES@toc(r2) - lwz r7,DCACHEL1BLOCKSIZE(r10)/* Get cache block size */ - addi r5,r7,-1 - andc r6,r3,r5 /* round low to line bdy */ - subf r8,r6,r4 /* compute length */ - add r8,r8,r5 /* ensure we get enough */ - lwz r9,DCACHEL1LOGBLOCKSIZE(r10) /* Get log-2 of cache block size */ - srw. r8,r8,r9 /* compute line count */ - beqlr /* nothing to do? */ - mtctr r8 -1: dcbst 0,r6 - add r6,r6,r7 - bdnz 1b - sync - -/* Now invalidate the instruction cache */ - - lwz r7,ICACHEL1BLOCKSIZE(r10) /* Get Icache block size */ - addi r5,r7,-1 - andc r6,r3,r5 /* round low to line bdy */ - subf r8,r6,r4 /* compute length */ - add r8,r8,r5 - lwz r9,ICACHEL1LOGBLOCKSIZE(r10) /* Get log-2 of Icache block size */ - srw. r8,r8,r9 /* compute line count */ - beqlr /* nothing to do? */ - mtctr r8 -2: icbi 0,r6 - add r6,r6,r7 - bdnz 2b - isync - blr -_ASM_NOKPROBE_SYMBOL(flush_icache_range) -EXPORT_SYMBOL(flush_icache_range) - -/* - * Flush a particular page from the data cache to RAM. - * Note: this is necessary because the instruction cache does *not* - * snoop from the data cache. - * - * void __flush_dcache_icache(void *page) - */ -_GLOBAL(__flush_dcache_icache) -/* - * Flush the data cache to memory - * - * Different systems have different cache line sizes - */ - -BEGIN_FTR_SECTION - PURGE_PREFETCHED_INS - blr -END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE) - -/* Flush the dcache */ - ld r7,PPC64_CACHES@toc(r2) - clrrdi r3,r3,PAGE_SHIFT /* Page align */ - lwz r4,DCACHEL1BLOCKSPERPAGE(r7) /* Get # dcache blocks per page */ - lwz r5,DCACHEL1BLOCKSIZE(r7) /* Get dcache block size */ - mr r6,r3 - mtctr r4 -0: dcbst 0,r6 - add r6,r6,r5 - bdnz 0b - sync - -/* Now invalidate the icache */ - - lwz r4,ICACHEL1BLOCKSPERPAGE(r7) /* Get # icache blocks per page */ - lwz r5,ICACHEL1BLOCKSIZE(r7) /* Get icache block size */ - mtctr r4 -1: icbi 0,r3 - add r3,r3,r5 - bdnz 1b - isync - blr - _GLOBAL(__bswapdi2) EXPORT_SYMBOL(__bswapdi2) srdi r8,r3,32 @@ -432,18 +330,13 @@ kexec_create_tlb: rlwimi r9,r10,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r9) */ /* Set up a temp identity mapping v:0 to p:0 and return to it. */ -#if defined(CONFIG_SMP) || defined(CONFIG_PPC_E500MC) -#define M_IF_NEEDED MAS2_M -#else -#define M_IF_NEEDED 0 -#endif mtspr SPRN_MAS0,r9 lis r9,(MAS1_VALID|MAS1_IPROT)@h ori r9,r9,(MAS1_TSIZE(BOOK3E_PAGESZ_1GB))@l mtspr SPRN_MAS1,r9 - LOAD_REG_IMMEDIATE(r9, 0x0 | M_IF_NEEDED) + LOAD_REG_IMMEDIATE(r9, 0x0 | MAS2_M_IF_NEEDED) mtspr SPRN_MAS2,r9 LOAD_REG_IMMEDIATE(r9, 0x0 | MAS3_SR | MAS3_SW | MAS3_SX) diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 639ceae7da9d..4df94b6e2f32 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -715,6 +715,8 @@ static void set_debug_reg_defaults(struct thread_struct *thread) { thread->hw_brk.address = 0; thread->hw_brk.type = 0; + thread->hw_brk.len = 0; + thread->hw_brk.hw_len = 0; if (ppc_breakpoint_available()) set_breakpoint(&thread->hw_brk); } @@ -816,6 +818,7 @@ static inline bool hw_brk_match(struct arch_hw_breakpoint *a, return false; if (a->len != b->len) return false; + /* no need to check hw_len. it's calculated from address and len */ return true; } diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 100f1b57ec2f..577345382b23 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -303,16 +303,24 @@ static char __init *prom_strstr(const char *s1, const char *s2) return NULL; } -static size_t __init prom_strlcpy(char *dest, const char *src, size_t size) -{ - size_t ret = prom_strlen(src); +static size_t __init prom_strlcat(char *dest, const char *src, size_t count) +{ + size_t dsize = prom_strlen(dest); + size_t len = prom_strlen(src); + size_t res = dsize + len; + + /* This would be a bug */ + if (dsize >= count) + return count; + + dest += dsize; + count -= dsize; + if (len >= count) + len = count-1; + memcpy(dest, src, len); + dest[len] = 0; + return res; - if (size) { - size_t len = (ret >= size) ? size - 1 : ret; - memcpy(dest, src, len); - dest[len] = '\0'; - } - return ret; } #ifdef CONFIG_PPC_PSERIES @@ -764,10 +772,14 @@ static void __init early_cmdline_parse(void) prom_cmd_line[0] = 0; p = prom_cmd_line; - if ((long)prom.chosen > 0) + + if (!IS_ENABLED(CONFIG_CMDLINE_FORCE) && (long)prom.chosen > 0) l = prom_getprop(prom.chosen, "bootargs", p, COMMAND_LINE_SIZE-1); - if (IS_ENABLED(CONFIG_CMDLINE_BOOL) && (l <= 0 || p[0] == '\0')) /* dbl check */ - prom_strlcpy(prom_cmd_line, CONFIG_CMDLINE, sizeof(prom_cmd_line)); + + if (IS_ENABLED(CONFIG_CMDLINE_EXTEND) || l <= 0 || p[0] == '\0') + prom_strlcat(prom_cmd_line, " " CONFIG_CMDLINE, + sizeof(prom_cmd_line)); + prom_printf("command line: %s\n", prom_cmd_line); #ifdef CONFIG_PPC64 @@ -1053,7 +1065,7 @@ static const struct ibm_arch_vec ibm_architecture_vec_template __initconst = { .reserved2 = 0, .reserved3 = 0, .subprocessors = 1, - .byte22 = OV5_FEAT(OV5_DRMEM_V2), + .byte22 = OV5_FEAT(OV5_DRMEM_V2) | OV5_FEAT(OV5_DRC_INFO), .intarch = 0, .mmu = 0, .hash_ext = 0, diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 8c92febf5f44..25c0424e8868 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -2425,7 +2425,8 @@ static int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, return -EIO; hw_brk.address = data & (~HW_BRK_TYPE_DABR); hw_brk.type = (data & HW_BRK_TYPE_DABR) | HW_BRK_TYPE_PRIV_ALL; - hw_brk.len = 8; + hw_brk.len = DABR_MAX_LEN; + hw_brk.hw_len = DABR_MAX_LEN; set_bp = (data) && (hw_brk.type & HW_BRK_TYPE_RDWR); #ifdef CONFIG_HAVE_HW_BREAKPOINT bp = thread->ptrace_bps[0]; @@ -2439,6 +2440,7 @@ static int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, if (bp) { attr = bp->attr; attr.bp_addr = hw_brk.address; + attr.bp_len = DABR_MAX_LEN; arch_bp_generic_fields(hw_brk.type, &attr.bp_type); /* Enable breakpoint */ @@ -2456,7 +2458,7 @@ static int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, /* Create a new breakpoint request if one doesn't exist already */ hw_breakpoint_init(&attr); attr.bp_addr = hw_brk.address; - attr.bp_len = 8; + attr.bp_len = DABR_MAX_LEN; arch_bp_generic_fields(hw_brk.type, &attr.bp_type); @@ -2880,18 +2882,14 @@ static long ppc_set_hwdebug(struct task_struct *child, if ((unsigned long)bp_info->addr >= TASK_SIZE) return -EIO; - brk.address = bp_info->addr & ~7UL; + brk.address = bp_info->addr & ~HW_BREAKPOINT_ALIGN; brk.type = HW_BRK_TYPE_TRANSLATE; - brk.len = 8; + brk.len = DABR_MAX_LEN; if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ) brk.type |= HW_BRK_TYPE_READ; if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE) brk.type |= HW_BRK_TYPE_WRITE; #ifdef CONFIG_HAVE_HW_BREAKPOINT - /* - * Check if the request is for 'range' breakpoints. We can - * support it if range < 8 bytes. - */ if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE) len = bp_info->addr2 - bp_info->addr; else if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_EXACT) @@ -2904,7 +2902,7 @@ static long ppc_set_hwdebug(struct task_struct *child, /* Create a new breakpoint request if one doesn't exist already */ hw_breakpoint_init(&attr); - attr.bp_addr = (unsigned long)bp_info->addr & ~HW_BREAKPOINT_ALIGN; + attr.bp_addr = (unsigned long)bp_info->addr; attr.bp_len = len; arch_bp_generic_fields(brk.type, &attr.bp_type); @@ -3361,6 +3359,12 @@ void do_syscall_trace_leave(struct pt_regs *regs) user_enter(); } +void __init pt_regs_check(void); + +/* + * Dummy function, its purpose is to break the build if struct pt_regs and + * struct user_pt_regs don't match. + */ void __init pt_regs_check(void) { BUILD_BUG_ON(offsetof(struct pt_regs, gpr) != @@ -3398,4 +3402,67 @@ void __init pt_regs_check(void) offsetof(struct user_pt_regs, result)); BUILD_BUG_ON(sizeof(struct user_pt_regs) > sizeof(struct pt_regs)); + + // Now check that the pt_regs offsets match the uapi #defines + #define CHECK_REG(_pt, _reg) \ + BUILD_BUG_ON(_pt != (offsetof(struct user_pt_regs, _reg) / \ + sizeof(unsigned long))); + + CHECK_REG(PT_R0, gpr[0]); + CHECK_REG(PT_R1, gpr[1]); + CHECK_REG(PT_R2, gpr[2]); + CHECK_REG(PT_R3, gpr[3]); + CHECK_REG(PT_R4, gpr[4]); + CHECK_REG(PT_R5, gpr[5]); + CHECK_REG(PT_R6, gpr[6]); + CHECK_REG(PT_R7, gpr[7]); + CHECK_REG(PT_R8, gpr[8]); + CHECK_REG(PT_R9, gpr[9]); + CHECK_REG(PT_R10, gpr[10]); + CHECK_REG(PT_R11, gpr[11]); + CHECK_REG(PT_R12, gpr[12]); + CHECK_REG(PT_R13, gpr[13]); + CHECK_REG(PT_R14, gpr[14]); + CHECK_REG(PT_R15, gpr[15]); + CHECK_REG(PT_R16, gpr[16]); + CHECK_REG(PT_R17, gpr[17]); + CHECK_REG(PT_R18, gpr[18]); + CHECK_REG(PT_R19, gpr[19]); + CHECK_REG(PT_R20, gpr[20]); + CHECK_REG(PT_R21, gpr[21]); + CHECK_REG(PT_R22, gpr[22]); + CHECK_REG(PT_R23, gpr[23]); + CHECK_REG(PT_R24, gpr[24]); + CHECK_REG(PT_R25, gpr[25]); + CHECK_REG(PT_R26, gpr[26]); + CHECK_REG(PT_R27, gpr[27]); + CHECK_REG(PT_R28, gpr[28]); + CHECK_REG(PT_R29, gpr[29]); + CHECK_REG(PT_R30, gpr[30]); + CHECK_REG(PT_R31, gpr[31]); + CHECK_REG(PT_NIP, nip); + CHECK_REG(PT_MSR, msr); + CHECK_REG(PT_ORIG_R3, orig_gpr3); + CHECK_REG(PT_CTR, ctr); + CHECK_REG(PT_LNK, link); + CHECK_REG(PT_XER, xer); + CHECK_REG(PT_CCR, ccr); +#ifdef CONFIG_PPC64 + CHECK_REG(PT_SOFTE, softe); +#else + CHECK_REG(PT_MQ, mq); +#endif + CHECK_REG(PT_TRAP, trap); + CHECK_REG(PT_DAR, dar); + CHECK_REG(PT_DSISR, dsisr); + CHECK_REG(PT_RESULT, result); + #undef CHECK_REG + + BUILD_BUG_ON(PT_REGS_COUNT != sizeof(struct user_pt_regs) / sizeof(unsigned long)); + + /* + * PT_DSCR isn't a real reg, but it's important that it doesn't overlap the + * real registers. + */ + BUILD_BUG_ON(PT_DSCR < sizeof(struct user_pt_regs) / sizeof(unsigned long)); } diff --git a/arch/powerpc/kernel/secure_boot.c b/arch/powerpc/kernel/secure_boot.c new file mode 100644 index 000000000000..4b982324d368 --- /dev/null +++ b/arch/powerpc/kernel/secure_boot.c @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 IBM Corporation + * Author: Nayna Jain + */ +#include <linux/types.h> +#include <linux/of.h> +#include <asm/secure_boot.h> + +static struct device_node *get_ppc_fw_sb_node(void) +{ + static const struct of_device_id ids[] = { + { .compatible = "ibm,secureboot", }, + { .compatible = "ibm,secureboot-v1", }, + { .compatible = "ibm,secureboot-v2", }, + {}, + }; + + return of_find_matching_node(NULL, ids); +} + +bool is_ppc_secureboot_enabled(void) +{ + struct device_node *node; + bool enabled = false; + + node = get_ppc_fw_sb_node(); + enabled = of_property_read_bool(node, "os-secureboot-enforcing"); + + of_node_put(node); + + pr_info("Secure boot mode %s\n", enabled ? "enabled" : "disabled"); + + return enabled; +} + +bool is_ppc_trustedboot_enabled(void) +{ + struct device_node *node; + bool enabled = false; + + node = get_ppc_fw_sb_node(); + enabled = of_property_read_bool(node, "trusted-enabled"); + + of_node_put(node); + + pr_info("Trusted boot mode %s\n", enabled ? "enabled" : "disabled"); + + return enabled; +} diff --git a/arch/powerpc/kernel/security.c b/arch/powerpc/kernel/security.c index 7cfcb294b11c..bd70f5be1c27 100644 --- a/arch/powerpc/kernel/security.c +++ b/arch/powerpc/kernel/security.c @@ -16,7 +16,7 @@ #include <asm/setup.h> -unsigned long powerpc_security_features __read_mostly = SEC_FTR_DEFAULT; +u64 powerpc_security_features __read_mostly = SEC_FTR_DEFAULT; enum count_cache_flush_type { COUNT_CACHE_FLUSH_NONE = 0x1, @@ -24,6 +24,7 @@ enum count_cache_flush_type { COUNT_CACHE_FLUSH_HW = 0x4, }; static enum count_cache_flush_type count_cache_flush_type = COUNT_CACHE_FLUSH_NONE; +static bool link_stack_flush_enabled; bool barrier_nospec_enabled; static bool no_nospec; @@ -94,13 +95,14 @@ static int barrier_nospec_get(void *data, u64 *val) return 0; } -DEFINE_SIMPLE_ATTRIBUTE(fops_barrier_nospec, - barrier_nospec_get, barrier_nospec_set, "%llu\n"); +DEFINE_DEBUGFS_ATTRIBUTE(fops_barrier_nospec, barrier_nospec_get, + barrier_nospec_set, "%llu\n"); static __init int barrier_nospec_debugfs_init(void) { - debugfs_create_file("barrier_nospec", 0600, powerpc_debugfs_root, NULL, - &fops_barrier_nospec); + debugfs_create_file_unsafe("barrier_nospec", 0600, + powerpc_debugfs_root, NULL, + &fops_barrier_nospec); return 0; } device_initcall(barrier_nospec_debugfs_init); @@ -108,7 +110,7 @@ device_initcall(barrier_nospec_debugfs_init); static __init int security_feature_debugfs_init(void) { debugfs_create_x64("security_features", 0400, powerpc_debugfs_root, - (u64 *)&powerpc_security_features); + &powerpc_security_features); return 0; } device_initcall(security_feature_debugfs_init); @@ -141,32 +143,33 @@ ssize_t cpu_show_meltdown(struct device *dev, struct device_attribute *attr, cha thread_priv = security_ftr_enabled(SEC_FTR_L1D_THREAD_PRIV); - if (rfi_flush || thread_priv) { + if (rfi_flush) { struct seq_buf s; seq_buf_init(&s, buf, PAGE_SIZE - 1); - seq_buf_printf(&s, "Mitigation: "); - - if (rfi_flush) - seq_buf_printf(&s, "RFI Flush"); - - if (rfi_flush && thread_priv) - seq_buf_printf(&s, ", "); - + seq_buf_printf(&s, "Mitigation: RFI Flush"); if (thread_priv) - seq_buf_printf(&s, "L1D private per thread"); + seq_buf_printf(&s, ", L1D private per thread"); seq_buf_printf(&s, "\n"); return s.len; } + if (thread_priv) + return sprintf(buf, "Vulnerable: L1D private per thread\n"); + if (!security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV) && !security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR)) return sprintf(buf, "Not affected\n"); return sprintf(buf, "Vulnerable\n"); } + +ssize_t cpu_show_l1tf(struct device *dev, struct device_attribute *attr, char *buf) +{ + return cpu_show_meltdown(dev, attr, buf); +} #endif ssize_t cpu_show_spectre_v1(struct device *dev, struct device_attribute *attr, char *buf) @@ -212,11 +215,19 @@ ssize_t cpu_show_spectre_v2(struct device *dev, struct device_attribute *attr, c if (ccd) seq_buf_printf(&s, "Indirect branch cache disabled"); + + if (link_stack_flush_enabled) + seq_buf_printf(&s, ", Software link stack flush"); + } else if (count_cache_flush_type != COUNT_CACHE_FLUSH_NONE) { seq_buf_printf(&s, "Mitigation: Software count cache flush"); if (count_cache_flush_type == COUNT_CACHE_FLUSH_HW) seq_buf_printf(&s, " (hardware accelerated)"); + + if (link_stack_flush_enabled) + seq_buf_printf(&s, ", Software link stack flush"); + } else if (btb_flush_enabled) { seq_buf_printf(&s, "Mitigation: Branch predictor state flush"); } else { @@ -367,28 +378,61 @@ static int stf_barrier_get(void *data, u64 *val) return 0; } -DEFINE_SIMPLE_ATTRIBUTE(fops_stf_barrier, stf_barrier_get, stf_barrier_set, "%llu\n"); +DEFINE_DEBUGFS_ATTRIBUTE(fops_stf_barrier, stf_barrier_get, stf_barrier_set, + "%llu\n"); static __init int stf_barrier_debugfs_init(void) { - debugfs_create_file("stf_barrier", 0600, powerpc_debugfs_root, NULL, &fops_stf_barrier); + debugfs_create_file_unsafe("stf_barrier", 0600, powerpc_debugfs_root, + NULL, &fops_stf_barrier); return 0; } device_initcall(stf_barrier_debugfs_init); #endif /* CONFIG_DEBUG_FS */ +static void no_count_cache_flush(void) +{ + count_cache_flush_type = COUNT_CACHE_FLUSH_NONE; + pr_info("count-cache-flush: software flush disabled.\n"); +} + static void toggle_count_cache_flush(bool enable) { - if (!enable || !security_ftr_enabled(SEC_FTR_FLUSH_COUNT_CACHE)) { + if (!security_ftr_enabled(SEC_FTR_FLUSH_COUNT_CACHE) && + !security_ftr_enabled(SEC_FTR_FLUSH_LINK_STACK)) + enable = false; + + if (!enable) { patch_instruction_site(&patch__call_flush_count_cache, PPC_INST_NOP); - count_cache_flush_type = COUNT_CACHE_FLUSH_NONE; - pr_info("count-cache-flush: software flush disabled.\n"); +#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE + patch_instruction_site(&patch__call_kvm_flush_link_stack, PPC_INST_NOP); +#endif + pr_info("link-stack-flush: software flush disabled.\n"); + link_stack_flush_enabled = false; + no_count_cache_flush(); return; } + // This enables the branch from _switch to flush_count_cache patch_branch_site(&patch__call_flush_count_cache, (u64)&flush_count_cache, BRANCH_SET_LINK); +#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE + // This enables the branch from guest_exit_cont to kvm_flush_link_stack + patch_branch_site(&patch__call_kvm_flush_link_stack, + (u64)&kvm_flush_link_stack, BRANCH_SET_LINK); +#endif + + pr_info("link-stack-flush: software flush enabled.\n"); + link_stack_flush_enabled = true; + + // If we just need to flush the link stack, patch an early return + if (!security_ftr_enabled(SEC_FTR_FLUSH_COUNT_CACHE)) { + patch_instruction_site(&patch__flush_link_stack_return, PPC_INST_BLR); + no_count_cache_flush(); + return; + } + if (!security_ftr_enabled(SEC_FTR_BCCTR_FLUSH_ASSIST)) { count_cache_flush_type = COUNT_CACHE_FLUSH_SW; pr_info("count-cache-flush: full software flush sequence enabled.\n"); @@ -407,11 +451,20 @@ void setup_count_cache_flush(void) if (no_spectrev2 || cpu_mitigations_off()) { if (security_ftr_enabled(SEC_FTR_BCCTRL_SERIALISED) || security_ftr_enabled(SEC_FTR_COUNT_CACHE_DISABLED)) - pr_warn("Spectre v2 mitigations not under software control, can't disable\n"); + pr_warn("Spectre v2 mitigations not fully under software control, can't disable\n"); enable = false; } + /* + * There's no firmware feature flag/hypervisor bit to tell us we need to + * flush the link stack on context switch. So we set it here if we see + * either of the Spectre v2 mitigations that aim to protect userspace. + */ + if (security_ftr_enabled(SEC_FTR_COUNT_CACHE_DISABLED) || + security_ftr_enabled(SEC_FTR_FLUSH_COUNT_CACHE)) + security_ftr_set(SEC_FTR_FLUSH_LINK_STACK); + toggle_count_cache_flush(enable); } @@ -442,13 +495,14 @@ static int count_cache_flush_get(void *data, u64 *val) return 0; } -DEFINE_SIMPLE_ATTRIBUTE(fops_count_cache_flush, count_cache_flush_get, - count_cache_flush_set, "%llu\n"); +DEFINE_DEBUGFS_ATTRIBUTE(fops_count_cache_flush, count_cache_flush_get, + count_cache_flush_set, "%llu\n"); static __init int count_cache_flush_debugfs_init(void) { - debugfs_create_file("count_cache_flush", 0600, powerpc_debugfs_root, - NULL, &fops_count_cache_flush); + debugfs_create_file_unsafe("count_cache_flush", 0600, + powerpc_debugfs_root, NULL, + &fops_count_cache_flush); return 0; } device_initcall(count_cache_flush_debugfs_init); diff --git a/arch/powerpc/kernel/secvar-ops.c b/arch/powerpc/kernel/secvar-ops.c new file mode 100644 index 000000000000..6a29777d6a2d --- /dev/null +++ b/arch/powerpc/kernel/secvar-ops.c @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 IBM Corporation + * Author: Nayna Jain + * + * This file initializes secvar operations for PowerPC Secureboot + */ + +#include <linux/cache.h> +#include <asm/secvar.h> + +const struct secvar_operations *secvar_ops __ro_after_init; + +void set_secvar_ops(const struct secvar_operations *ops) +{ + secvar_ops = ops; +} diff --git a/arch/powerpc/kernel/secvar-sysfs.c b/arch/powerpc/kernel/secvar-sysfs.c new file mode 100644 index 000000000000..a0a78aba2083 --- /dev/null +++ b/arch/powerpc/kernel/secvar-sysfs.c @@ -0,0 +1,248 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 IBM Corporation <nayna@linux.ibm.com> + * + * This code exposes secure variables to user via sysfs + */ + +#define pr_fmt(fmt) "secvar-sysfs: "fmt + +#include <linux/slab.h> +#include <linux/compat.h> +#include <linux/string.h> +#include <linux/of.h> +#include <asm/secvar.h> + +#define NAME_MAX_SIZE 1024 + +static struct kobject *secvar_kobj; +static struct kset *secvar_kset; + +static ssize_t format_show(struct kobject *kobj, struct kobj_attribute *attr, + char *buf) +{ + ssize_t rc = 0; + struct device_node *node; + const char *format; + + node = of_find_compatible_node(NULL, NULL, "ibm,secvar-backend"); + if (!of_device_is_available(node)) + return -ENODEV; + + rc = of_property_read_string(node, "format", &format); + if (rc) + return rc; + + rc = sprintf(buf, "%s\n", format); + + of_node_put(node); + + return rc; +} + + +static ssize_t size_show(struct kobject *kobj, struct kobj_attribute *attr, + char *buf) +{ + uint64_t dsize; + int rc; + + rc = secvar_ops->get(kobj->name, strlen(kobj->name) + 1, NULL, &dsize); + if (rc) { + pr_err("Error retrieving %s variable size %d\n", kobj->name, + rc); + return rc; + } + + return sprintf(buf, "%llu\n", dsize); +} + +static ssize_t data_read(struct file *filep, struct kobject *kobj, + struct bin_attribute *attr, char *buf, loff_t off, + size_t count) +{ + uint64_t dsize; + char *data; + int rc; + + rc = secvar_ops->get(kobj->name, strlen(kobj->name) + 1, NULL, &dsize); + if (rc) { + pr_err("Error getting %s variable size %d\n", kobj->name, rc); + return rc; + } + pr_debug("dsize is %llu\n", dsize); + + data = kzalloc(dsize, GFP_KERNEL); + if (!data) + return -ENOMEM; + + rc = secvar_ops->get(kobj->name, strlen(kobj->name) + 1, data, &dsize); + if (rc) { + pr_err("Error getting %s variable %d\n", kobj->name, rc); + goto data_fail; + } + + rc = memory_read_from_buffer(buf, count, &off, data, dsize); + +data_fail: + kfree(data); + return rc; +} + +static ssize_t update_write(struct file *filep, struct kobject *kobj, + struct bin_attribute *attr, char *buf, loff_t off, + size_t count) +{ + int rc; + + pr_debug("count is %ld\n", count); + rc = secvar_ops->set(kobj->name, strlen(kobj->name) + 1, buf, count); + if (rc) { + pr_err("Error setting the %s variable %d\n", kobj->name, rc); + return rc; + } + + return count; +} + +static struct kobj_attribute format_attr = __ATTR_RO(format); + +static struct kobj_attribute size_attr = __ATTR_RO(size); + +static struct bin_attribute data_attr = __BIN_ATTR_RO(data, 0); + +static struct bin_attribute update_attr = __BIN_ATTR_WO(update, 0); + +static struct bin_attribute *secvar_bin_attrs[] = { + &data_attr, + &update_attr, + NULL, +}; + +static struct attribute *secvar_attrs[] = { + &size_attr.attr, + NULL, +}; + +static const struct attribute_group secvar_attr_group = { + .attrs = secvar_attrs, + .bin_attrs = secvar_bin_attrs, +}; +__ATTRIBUTE_GROUPS(secvar_attr); + +static struct kobj_type secvar_ktype = { + .sysfs_ops = &kobj_sysfs_ops, + .default_groups = secvar_attr_groups, +}; + +static int update_kobj_size(void) +{ + + struct device_node *node; + u64 varsize; + int rc = 0; + + node = of_find_compatible_node(NULL, NULL, "ibm,secvar-backend"); + if (!of_device_is_available(node)) { + rc = -ENODEV; + goto out; + } + + rc = of_property_read_u64(node, "max-var-size", &varsize); + if (rc) + goto out; + + data_attr.size = varsize; + update_attr.size = varsize; + +out: + of_node_put(node); + + return rc; +} + +static int secvar_sysfs_load(void) +{ + char *name; + uint64_t namesize = 0; + struct kobject *kobj; + int rc; + + name = kzalloc(NAME_MAX_SIZE, GFP_KERNEL); + if (!name) + return -ENOMEM; + + do { + rc = secvar_ops->get_next(name, &namesize, NAME_MAX_SIZE); + if (rc) { + if (rc != -ENOENT) + pr_err("error getting secvar from firmware %d\n", + rc); + break; + } + + kobj = kzalloc(sizeof(*kobj), GFP_KERNEL); + if (!kobj) { + rc = -ENOMEM; + break; + } + + kobject_init(kobj, &secvar_ktype); + + rc = kobject_add(kobj, &secvar_kset->kobj, "%s", name); + if (rc) { + pr_warn("kobject_add error %d for attribute: %s\n", rc, + name); + kobject_put(kobj); + kobj = NULL; + } + + if (kobj) + kobject_uevent(kobj, KOBJ_ADD); + + } while (!rc); + + kfree(name); + return rc; +} + +static int secvar_sysfs_init(void) +{ + int rc; + + if (!secvar_ops) { + pr_warn("secvar: failed to retrieve secvar operations.\n"); + return -ENODEV; + } + + secvar_kobj = kobject_create_and_add("secvar", firmware_kobj); + if (!secvar_kobj) { + pr_err("secvar: Failed to create firmware kobj\n"); + return -ENOMEM; + } + + rc = sysfs_create_file(secvar_kobj, &format_attr.attr); + if (rc) { + kobject_put(secvar_kobj); + return -ENOMEM; + } + + secvar_kset = kset_create_and_add("vars", NULL, secvar_kobj); + if (!secvar_kset) { + pr_err("secvar: sysfs kobject registration failed.\n"); + kobject_put(secvar_kobj); + return -ENOMEM; + } + + rc = update_kobj_size(); + if (rc) { + pr_err("Cannot read the size of the attribute\n"); + return rc; + } + + secvar_sysfs_load(); + + return 0; +} + +late_initcall(secvar_sysfs_init); diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 25aaa3903000..488f1eecc0de 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -715,8 +715,28 @@ static struct notifier_block ppc_panic_block = { .priority = INT_MIN /* may not return; must be done last */ }; +/* + * Dump out kernel offset information on panic. + */ +static int dump_kernel_offset(struct notifier_block *self, unsigned long v, + void *p) +{ + pr_emerg("Kernel Offset: 0x%lx from 0x%lx\n", + kaslr_offset(), KERNELBASE); + + return 0; +} + +static struct notifier_block kernel_offset_notifier = { + .notifier_call = dump_kernel_offset +}; + void __init setup_panic(void) { + if (IS_ENABLED(CONFIG_RANDOMIZE_BASE) && kaslr_offset() > 0) + atomic_notifier_chain_register(&panic_notifier_list, + &kernel_offset_notifier); + /* PPC64 always does a hard irq disable in its panic handler */ if (!IS_ENABLED(CONFIG_PPC64) && !ppc_md.panic) return; diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index a7541edf0cdb..dcffe927f5b9 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -44,6 +44,7 @@ #include <asm/asm-prototypes.h> #include <asm/kdump.h> #include <asm/feature-fixups.h> +#include <asm/early_ioremap.h> #include "setup.h" @@ -80,6 +81,8 @@ notrace void __init machine_init(u64 dt_ptr) /* Configure static keys first, now that we're relocated. */ setup_feature_keys(); + early_ioremap_setup(); + /* Enable early debugging if any specified (see udbg.h) */ udbg_early_init(); diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 44b4c432a273..6104917a282d 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -65,15 +65,10 @@ #include <asm/hw_irq.h> #include <asm/feature-fixups.h> #include <asm/kup.h> +#include <asm/early_ioremap.h> #include "setup.h" -#ifdef DEBUG -#define DBG(fmt...) udbg_printf(fmt) -#else -#define DBG(fmt...) -#endif - int spinning_secondaries; u64 ppc64_pft_size; @@ -305,7 +300,7 @@ void __init early_setup(unsigned long dt_ptr) /* Enable early debugging if any specified (see udbg.h) */ udbg_early_init(); - DBG(" -> early_setup(), dt_ptr: 0x%lx\n", dt_ptr); + udbg_printf(" -> %s(), dt_ptr: 0x%lx\n", __func__, dt_ptr); /* * Do early initialization using the flattened device @@ -338,6 +333,8 @@ void __init early_setup(unsigned long dt_ptr) apply_feature_fixups(); setup_feature_keys(); + early_ioremap_setup(); + /* Initialize the hash table or TLB handling */ early_init_mmu(); @@ -362,11 +359,11 @@ void __init early_setup(unsigned long dt_ptr) */ this_cpu_enable_ftrace(); - DBG(" <- early_setup()\n"); + udbg_printf(" <- %s()\n", __func__); #ifdef CONFIG_PPC_EARLY_DEBUG_BOOTX /* - * This needs to be done *last* (after the above DBG() even) + * This needs to be done *last* (after the above udbg_printf() even) * * Right after we return from this function, we turn on the MMU * which means the real-mode access trick that btext does will @@ -436,8 +433,6 @@ void smp_release_cpus(void) if (!use_spinloop()) return; - DBG(" -> smp_release_cpus()\n"); - /* All secondary cpus are spinning on a common spinloop, release them * all now so they can start to spin on their individual paca * spinloops. For non SMP kernels, the secondary cpus never get out @@ -456,9 +451,7 @@ void smp_release_cpus(void) break; udelay(1); } - DBG("spinning_secondaries = %d\n", spinning_secondaries); - - DBG(" <- smp_release_cpus()\n"); + pr_debug("spinning_secondaries = %d\n", spinning_secondaries); } #endif /* CONFIG_SMP || CONFIG_KEXEC_CORE */ @@ -551,8 +544,6 @@ void __init initialize_cache_info(void) struct device_node *cpu = NULL, *l2, *l3 = NULL; u32 pvr; - DBG(" -> initialize_cache_info()\n"); - /* * All shipping POWER8 machines have a firmware bug that * puts incorrect information in the device-tree. This will @@ -576,10 +567,10 @@ void __init initialize_cache_info(void) */ if (cpu) { if (!parse_cache_info(cpu, false, &ppc64_caches.l1d)) - DBG("Argh, can't find dcache properties !\n"); + pr_warn("Argh, can't find dcache properties !\n"); if (!parse_cache_info(cpu, true, &ppc64_caches.l1i)) - DBG("Argh, can't find icache properties !\n"); + pr_warn("Argh, can't find icache properties !\n"); /* * Try to find the L2 and L3 if any. Assume they are @@ -604,8 +595,6 @@ void __init initialize_cache_info(void) cur_cpu_spec->dcache_bsize = dcache_bsize; cur_cpu_spec->icache_bsize = icache_bsize; - - DBG(" <- initialize_cache_info()\n"); } /* diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c index 3bfb3888e897..078608ec2e92 100644 --- a/arch/powerpc/kernel/syscalls.c +++ b/arch/powerpc/kernel/syscalls.c @@ -79,7 +79,7 @@ SYSCALL_DEFINE6(mmap, unsigned long, addr, size_t, len, * sys_select() with the appropriate args. -- Cort */ int -ppc_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp, struct timeval __user *tvp) +ppc_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp, struct __kernel_old_timeval __user *tvp) { if ( (unsigned long)n >= 4096 ) { @@ -89,7 +89,7 @@ ppc_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp, s || __get_user(inp, ((fd_set __user * __user *)(buffer+1))) || __get_user(outp, ((fd_set __user * __user *)(buffer+2))) || __get_user(exp, ((fd_set __user * __user *)(buffer+3))) - || __get_user(tvp, ((struct timeval __user * __user *)(buffer+4)))) + || __get_user(tvp, ((struct __kernel_old_timeval __user * __user *)(buffer+4)))) return -EFAULT; } return sys_select(n, inp, outp, exp, tvp); diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 84827da01d45..1168e8b37e30 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -232,7 +232,7 @@ static u64 scan_dispatch_log(u64 stop_tb) * Accumulate stolen time by scanning the dispatch trace log. * Called on entry from user mode. */ -void accumulate_stolen_time(void) +void notrace accumulate_stolen_time(void) { u64 sst, ust; unsigned long save_irq_soft_mask = irq_soft_mask_return(); @@ -885,7 +885,7 @@ static notrace u64 timebase_read(struct clocksource *cs) void update_vsyscall(struct timekeeper *tk) { - struct timespec xt; + struct timespec64 xt; struct clocksource *clock = tk->tkr_mono.clock; u32 mult = tk->tkr_mono.mult; u32 shift = tk->tkr_mono.shift; @@ -957,8 +957,10 @@ void update_vsyscall(struct timekeeper *tk) vdso_data->tb_to_xs = new_tb_to_xs; vdso_data->wtom_clock_sec = tk->wall_to_monotonic.tv_sec; vdso_data->wtom_clock_nsec = tk->wall_to_monotonic.tv_nsec; - vdso_data->stamp_xtime = xt; + vdso_data->stamp_xtime_sec = xt.tv_sec; + vdso_data->stamp_xtime_nsec = xt.tv_nsec; vdso_data->stamp_sec_fraction = frac_sec; + vdso_data->hrtimer_res = hrtimer_resolution; smp_wmb(); ++(vdso_data->tb_update_count); } diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 82f43535e686..014ff0701f24 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -250,15 +250,22 @@ static void oops_end(unsigned long flags, struct pt_regs *regs, } NOKPROBE_SYMBOL(oops_end); +static char *get_mmu_str(void) +{ + if (early_radix_enabled()) + return " MMU=Radix"; + if (early_mmu_has_feature(MMU_FTR_HPTE_TABLE)) + return " MMU=Hash"; + return ""; +} + static int __die(const char *str, struct pt_regs *regs, long err) { printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter); - printk("%s PAGE_SIZE=%luK%s%s%s%s%s%s%s %s\n", + printk("%s PAGE_SIZE=%luK%s%s%s%s%s%s %s\n", IS_ENABLED(CONFIG_CPU_LITTLE_ENDIAN) ? "LE" : "BE", - PAGE_SIZE / 1024, - early_radix_enabled() ? " MMU=Radix" : "", - early_mmu_has_feature(MMU_FTR_HPTE_TABLE) ? " MMU=Hash" : "", + PAGE_SIZE / 1024, get_mmu_str(), IS_ENABLED(CONFIG_PREEMPT) ? " PREEMPT" : "", IS_ENABLED(CONFIG_SMP) ? " SMP" : "", IS_ENABLED(CONFIG_SMP) ? (" NR_CPUS=" __stringify(NR_CPUS)) : "", diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c index a384e7c8b01c..01595e8cafe7 100644 --- a/arch/powerpc/kernel/udbg.c +++ b/arch/powerpc/kernel/udbg.c @@ -120,13 +120,15 @@ int udbg_write(const char *s, int n) #define UDBG_BUFSIZE 256 void udbg_printf(const char *fmt, ...) { - char buf[UDBG_BUFSIZE]; - va_list args; + if (udbg_putc) { + char buf[UDBG_BUFSIZE]; + va_list args; - va_start(args, fmt); - vsnprintf(buf, UDBG_BUFSIZE, fmt, args); - udbg_puts(buf); - va_end(args); + va_start(args, fmt); + vsnprintf(buf, UDBG_BUFSIZE, fmt, args); + udbg_puts(buf); + va_end(args); + } } void __init udbg_progress(char *s, unsigned short hex) diff --git a/arch/powerpc/kernel/vdso32/gettimeofday.S b/arch/powerpc/kernel/vdso32/gettimeofday.S index becd9f8767ed..3306672f57a9 100644 --- a/arch/powerpc/kernel/vdso32/gettimeofday.S +++ b/arch/powerpc/kernel/vdso32/gettimeofday.S @@ -15,10 +15,8 @@ /* Offset for the low 32-bit part of a field of long type */ #ifdef CONFIG_PPC64 #define LOPART 4 -#define TSPEC_TV_SEC TSPC64_TV_SEC+LOPART #else #define LOPART 0 -#define TSPEC_TV_SEC TSPC32_TV_SEC #endif .text @@ -156,12 +154,15 @@ V_FUNCTION_BEGIN(__kernel_clock_getres) cror cr0*4+eq,cr0*4+eq,cr1*4+eq bne cr0,99f + mflr r12 + .cfi_register lr,r12 + bl __get_datapage@local /* get data page */ + lwz r5, CLOCK_HRTIMER_RES(r3) + mtlr r12 li r3,0 cmpli cr0,r4,0 crclr cr0*4+so beqlr - lis r5,CLOCK_REALTIME_RES@h - ori r5,r5,CLOCK_REALTIME_RES@l stw r3,TSPC32_TV_SEC(r4) stw r5,TSPC32_TV_NSEC(r4) blr @@ -192,7 +193,7 @@ V_FUNCTION_BEGIN(__kernel_time) bl __get_datapage@local mr r9, r3 /* datapage ptr in r9 */ - lwz r3,STAMP_XTIME+TSPEC_TV_SEC(r9) + lwz r3,STAMP_XTIME_SEC+LOPART(r9) cmplwi r11,0 /* check if t is NULL */ beq 2f @@ -268,7 +269,7 @@ __do_get_tspec: * as a 32.32 fixed-point number in r3 and r4. * Load & add the xtime stamp. */ - lwz r5,STAMP_XTIME+TSPEC_TV_SEC(r9) + lwz r5,STAMP_XTIME_SEC+LOPART(r9) lwz r6,STAMP_SEC_FRAC(r9) addc r4,r4,r6 adde r3,r3,r5 diff --git a/arch/powerpc/kernel/vdso64/cacheflush.S b/arch/powerpc/kernel/vdso64/cacheflush.S index 3f92561a64c4..526f5ba2593e 100644 --- a/arch/powerpc/kernel/vdso64/cacheflush.S +++ b/arch/powerpc/kernel/vdso64/cacheflush.S @@ -35,7 +35,7 @@ V_FUNCTION_BEGIN(__kernel_sync_dicache) subf r8,r6,r4 /* compute length */ add r8,r8,r5 /* ensure we get enough */ lwz r9,CFG_DCACHE_LOGBLOCKSZ(r10) - srw. r8,r8,r9 /* compute line count */ + srd. r8,r8,r9 /* compute line count */ crclr cr0*4+so beqlr /* nothing to do? */ mtctr r8 @@ -52,7 +52,7 @@ V_FUNCTION_BEGIN(__kernel_sync_dicache) subf r8,r6,r4 /* compute length */ add r8,r8,r5 lwz r9,CFG_ICACHE_LOGBLOCKSZ(r10) - srw. r8,r8,r9 /* compute line count */ + srd. r8,r8,r9 /* compute line count */ crclr cr0*4+so beqlr /* nothing to do? */ mtctr r8 diff --git a/arch/powerpc/kernel/vdso64/gettimeofday.S b/arch/powerpc/kernel/vdso64/gettimeofday.S index 07bfe33fe874..1c9a04703250 100644 --- a/arch/powerpc/kernel/vdso64/gettimeofday.S +++ b/arch/powerpc/kernel/vdso64/gettimeofday.S @@ -116,8 +116,8 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) * CLOCK_REALTIME_COARSE, below values are needed for MONOTONIC_COARSE * too */ - ld r4,STAMP_XTIME+TSPC64_TV_SEC(r3) - ld r5,STAMP_XTIME+TSPC64_TV_NSEC(r3) + ld r4,STAMP_XTIME_SEC(r3) + ld r5,STAMP_XTIME_NSEC(r3) bne cr6,75f /* CLOCK_MONOTONIC_COARSE */ @@ -186,12 +186,15 @@ V_FUNCTION_BEGIN(__kernel_clock_getres) cror cr0*4+eq,cr0*4+eq,cr1*4+eq bne cr0,99f + mflr r12 + .cfi_register lr,r12 + bl V_LOCAL_FUNC(__get_datapage) + lwz r5, CLOCK_HRTIMER_RES(r3) + mtlr r12 li r3,0 cmpldi cr0,r4,0 crclr cr0*4+so beqlr - lis r5,CLOCK_REALTIME_RES@h - ori r5,r5,CLOCK_REALTIME_RES@l std r3,TSPC64_TV_SEC(r4) std r5,TSPC64_TV_NSEC(r4) blr @@ -220,7 +223,7 @@ V_FUNCTION_BEGIN(__kernel_time) mr r11,r3 /* r11 holds t */ bl V_LOCAL_FUNC(__get_datapage) - ld r4,STAMP_XTIME+TSPC64_TV_SEC(r3) + ld r4,STAMP_XTIME_SEC(r3) cmpldi r11,0 /* check if t is NULL */ beq 2f @@ -265,7 +268,7 @@ V_FUNCTION_BEGIN(__do_get_tspec) mulhdu r6,r6,r5 /* in units of 2^-32 seconds */ /* Add stamp since epoch */ - ld r4,STAMP_XTIME+TSPC64_TV_SEC(r3) + ld r4,STAMP_XTIME_SEC(r3) lwz r5,STAMP_SEC_FRAC(r3) or r0,r4,r5 or r0,r0,r6 diff --git a/arch/powerpc/kexec/Makefile b/arch/powerpc/kexec/Makefile new file mode 100644 index 000000000000..378f6108a414 --- /dev/null +++ b/arch/powerpc/kexec/Makefile @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for the linux kernel. +# + +# Avoid clang warnings around longjmp/setjmp declarations +CFLAGS_crash.o += -ffreestanding + +obj-y += core.o crash.o core_$(BITS).o + +obj-$(CONFIG_PPC32) += relocate_32.o + +obj-$(CONFIG_KEXEC_FILE) += file_load.o elf_$(BITS).o + +ifdef CONFIG_HAVE_IMA_KEXEC +ifdef CONFIG_IMA +obj-y += ima.o +endif +endif + + +# Disable GCOV, KCOV & sanitizers in odd or sensitive code +GCOV_PROFILE_core_$(BITS).o := n +KCOV_INSTRUMENT_core_$(BITS).o := n +UBSAN_SANITIZE_core_$(BITS).o := n diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kexec/core.c index c4ed328a7b96..078fe3d76feb 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kexec/core.c @@ -86,6 +86,7 @@ void arch_crash_save_vmcoreinfo(void) VMCOREINFO_STRUCT_SIZE(mmu_psize_def); VMCOREINFO_OFFSET(mmu_psize_def, shift); #endif + vmcoreinfo_append_str("KERNELOFFSET=%lx\n", kaslr_offset()); } /* diff --git a/arch/powerpc/kernel/machine_kexec_32.c b/arch/powerpc/kexec/core_32.c index bf9f1f906d64..bf9f1f906d64 100644 --- a/arch/powerpc/kernel/machine_kexec_32.c +++ b/arch/powerpc/kexec/core_32.c diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kexec/core_64.c index 04a7cba58eff..04a7cba58eff 100644 --- a/arch/powerpc/kernel/machine_kexec_64.c +++ b/arch/powerpc/kexec/core_64.c diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kexec/crash.c index d488311efab1..d488311efab1 100644 --- a/arch/powerpc/kernel/crash.c +++ b/arch/powerpc/kexec/crash.c diff --git a/arch/powerpc/kernel/kexec_elf_64.c b/arch/powerpc/kexec/elf_64.c index 3072fd6dbe94..3072fd6dbe94 100644 --- a/arch/powerpc/kernel/kexec_elf_64.c +++ b/arch/powerpc/kexec/elf_64.c diff --git a/arch/powerpc/kernel/machine_kexec_file_64.c b/arch/powerpc/kexec/file_load.c index 143c91724617..143c91724617 100644 --- a/arch/powerpc/kernel/machine_kexec_file_64.c +++ b/arch/powerpc/kexec/file_load.c diff --git a/arch/powerpc/kernel/ima_kexec.c b/arch/powerpc/kexec/ima.c index 720e50e490b6..720e50e490b6 100644 --- a/arch/powerpc/kernel/ima_kexec.c +++ b/arch/powerpc/kexec/ima.c diff --git a/arch/powerpc/kexec/relocate_32.S b/arch/powerpc/kexec/relocate_32.S new file mode 100644 index 000000000000..61946c19e07c --- /dev/null +++ b/arch/powerpc/kexec/relocate_32.S @@ -0,0 +1,500 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * This file contains kexec low-level functions. + * + * Copyright (C) 2002-2003 Eric Biederman <ebiederm@xmission.com> + * GameCube/ppc32 port Copyright (C) 2004 Albert Herranz + * PPC44x port. Copyright (C) 2011, IBM Corporation + * Author: Suzuki Poulose <suzuki@in.ibm.com> + */ + +#include <asm/reg.h> +#include <asm/page.h> +#include <asm/mmu.h> +#include <asm/ppc_asm.h> +#include <asm/kexec.h> + + .text + + /* + * Must be relocatable PIC code callable as a C function. + */ + .globl relocate_new_kernel +relocate_new_kernel: + /* r3 = page_list */ + /* r4 = reboot_code_buffer */ + /* r5 = start_address */ + +#ifdef CONFIG_FSL_BOOKE + + mr r29, r3 + mr r30, r4 + mr r31, r5 + +#define ENTRY_MAPPING_KEXEC_SETUP +#include <kernel/fsl_booke_entry_mapping.S> +#undef ENTRY_MAPPING_KEXEC_SETUP + + mr r3, r29 + mr r4, r30 + mr r5, r31 + + li r0, 0 +#elif defined(CONFIG_44x) + + /* Save our parameters */ + mr r29, r3 + mr r30, r4 + mr r31, r5 + +#ifdef CONFIG_PPC_47x + /* Check for 47x cores */ + mfspr r3,SPRN_PVR + srwi r3,r3,16 + cmplwi cr0,r3,PVR_476FPE@h + beq setup_map_47x + cmplwi cr0,r3,PVR_476@h + beq setup_map_47x + cmplwi cr0,r3,PVR_476_ISS@h + beq setup_map_47x +#endif /* CONFIG_PPC_47x */ + +/* + * Code for setting up 1:1 mapping for PPC440x for KEXEC + * + * We cannot switch off the MMU on PPC44x. + * So we: + * 1) Invalidate all the mappings except the one we are running from. + * 2) Create a tmp mapping for our code in the other address space(TS) and + * jump to it. Invalidate the entry we started in. + * 3) Create a 1:1 mapping for 0-2GiB in chunks of 256M in original TS. + * 4) Jump to the 1:1 mapping in original TS. + * 5) Invalidate the tmp mapping. + * + * - Based on the kexec support code for FSL BookE + * + */ + + /* + * Load the PID with kernel PID (0). + * Also load our MSR_IS and TID to MMUCR for TLB search. + */ + li r3, 0 + mtspr SPRN_PID, r3 + mfmsr r4 + andi. r4,r4,MSR_IS@l + beq wmmucr + oris r3,r3,PPC44x_MMUCR_STS@h +wmmucr: + mtspr SPRN_MMUCR,r3 + sync + + /* + * Invalidate all the TLB entries except the current entry + * where we are running from + */ + bl 0f /* Find our address */ +0: mflr r5 /* Make it accessible */ + tlbsx r23,0,r5 /* Find entry we are in */ + li r4,0 /* Start at TLB entry 0 */ + li r3,0 /* Set PAGEID inval value */ +1: cmpw r23,r4 /* Is this our entry? */ + beq skip /* If so, skip the inval */ + tlbwe r3,r4,PPC44x_TLB_PAGEID /* If not, inval the entry */ +skip: + addi r4,r4,1 /* Increment */ + cmpwi r4,64 /* Are we done? */ + bne 1b /* If not, repeat */ + isync + + /* Create a temp mapping and jump to it */ + andi. r6, r23, 1 /* Find the index to use */ + addi r24, r6, 1 /* r24 will contain 1 or 2 */ + + mfmsr r9 /* get the MSR */ + rlwinm r5, r9, 27, 31, 31 /* Extract the MSR[IS] */ + xori r7, r5, 1 /* Use the other address space */ + + /* Read the current mapping entries */ + tlbre r3, r23, PPC44x_TLB_PAGEID + tlbre r4, r23, PPC44x_TLB_XLAT + tlbre r5, r23, PPC44x_TLB_ATTRIB + + /* Save our current XLAT entry */ + mr r25, r4 + + /* Extract the TLB PageSize */ + li r10, 1 /* r10 will hold PageSize */ + rlwinm r11, r3, 0, 24, 27 /* bits 24-27 */ + + /* XXX: As of now we use 256M, 4K pages */ + cmpwi r11, PPC44x_TLB_256M + bne tlb_4k + rotlwi r10, r10, 28 /* r10 = 256M */ + b write_out +tlb_4k: + cmpwi r11, PPC44x_TLB_4K + bne default + rotlwi r10, r10, 12 /* r10 = 4K */ + b write_out +default: + rotlwi r10, r10, 10 /* r10 = 1K */ + +write_out: + /* + * Write out the tmp 1:1 mapping for this code in other address space + * Fixup EPN = RPN , TS=other address space + */ + insrwi r3, r7, 1, 23 /* Bit 23 is TS for PAGEID field */ + + /* Write out the tmp mapping entries */ + tlbwe r3, r24, PPC44x_TLB_PAGEID + tlbwe r4, r24, PPC44x_TLB_XLAT + tlbwe r5, r24, PPC44x_TLB_ATTRIB + + subi r11, r10, 1 /* PageOffset Mask = PageSize - 1 */ + not r10, r11 /* Mask for PageNum */ + + /* Switch to other address space in MSR */ + insrwi r9, r7, 1, 26 /* Set MSR[IS] = r7 */ + + bl 1f +1: mflr r8 + addi r8, r8, (2f-1b) /* Find the target offset */ + + /* Jump to the tmp mapping */ + mtspr SPRN_SRR0, r8 + mtspr SPRN_SRR1, r9 + rfi + +2: + /* Invalidate the entry we were executing from */ + li r3, 0 + tlbwe r3, r23, PPC44x_TLB_PAGEID + + /* attribute fields. rwx for SUPERVISOR mode */ + li r5, 0 + ori r5, r5, (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G) + + /* Create 1:1 mapping in 256M pages */ + xori r7, r7, 1 /* Revert back to Original TS */ + + li r8, 0 /* PageNumber */ + li r6, 3 /* TLB Index, start at 3 */ + +next_tlb: + rotlwi r3, r8, 28 /* Create EPN (bits 0-3) */ + mr r4, r3 /* RPN = EPN */ + ori r3, r3, (PPC44x_TLB_VALID | PPC44x_TLB_256M) /* SIZE = 256M, Valid */ + insrwi r3, r7, 1, 23 /* Set TS from r7 */ + + tlbwe r3, r6, PPC44x_TLB_PAGEID /* PageID field : EPN, V, SIZE */ + tlbwe r4, r6, PPC44x_TLB_XLAT /* Address translation : RPN */ + tlbwe r5, r6, PPC44x_TLB_ATTRIB /* Attributes */ + + addi r8, r8, 1 /* Increment PN */ + addi r6, r6, 1 /* Increment TLB Index */ + cmpwi r8, 8 /* Are we done ? */ + bne next_tlb + isync + + /* Jump to the new mapping 1:1 */ + li r9,0 + insrwi r9, r7, 1, 26 /* Set MSR[IS] = r7 */ + + bl 1f +1: mflr r8 + and r8, r8, r11 /* Get our offset within page */ + addi r8, r8, (2f-1b) + + and r5, r25, r10 /* Get our target PageNum */ + or r8, r8, r5 /* Target jump address */ + + mtspr SPRN_SRR0, r8 + mtspr SPRN_SRR1, r9 + rfi +2: + /* Invalidate the tmp entry we used */ + li r3, 0 + tlbwe r3, r24, PPC44x_TLB_PAGEID + sync + b ppc44x_map_done + +#ifdef CONFIG_PPC_47x + + /* 1:1 mapping for 47x */ + +setup_map_47x: + + /* + * Load the kernel pid (0) to PID and also to MMUCR[TID]. + * Also set the MSR IS->MMUCR STS + */ + li r3, 0 + mtspr SPRN_PID, r3 /* Set PID */ + mfmsr r4 /* Get MSR */ + andi. r4, r4, MSR_IS@l /* TS=1? */ + beq 1f /* If not, leave STS=0 */ + oris r3, r3, PPC47x_MMUCR_STS@h /* Set STS=1 */ +1: mtspr SPRN_MMUCR, r3 /* Put MMUCR */ + sync + + /* Find the entry we are running from */ + bl 2f +2: mflr r23 + tlbsx r23, 0, r23 + tlbre r24, r23, 0 /* TLB Word 0 */ + tlbre r25, r23, 1 /* TLB Word 1 */ + tlbre r26, r23, 2 /* TLB Word 2 */ + + + /* + * Invalidates all the tlb entries by writing to 256 RPNs(r4) + * of 4k page size in all 4 ways (0-3 in r3). + * This would invalidate the entire UTLB including the one we are + * running from. However the shadow TLB entries would help us + * to continue the execution, until we flush them (rfi/isync). + */ + addis r3, 0, 0x8000 /* specify the way */ + addi r4, 0, 0 /* TLB Word0 = (EPN=0, VALID = 0) */ + addi r5, 0, 0 + b clear_utlb_entry + + /* Align the loop to speed things up. from head_44x.S */ + .align 6 + +clear_utlb_entry: + + tlbwe r4, r3, 0 + tlbwe r5, r3, 1 + tlbwe r5, r3, 2 + addis r3, r3, 0x2000 /* Increment the way */ + cmpwi r3, 0 + bne clear_utlb_entry + addis r3, 0, 0x8000 + addis r4, r4, 0x100 /* Increment the EPN */ + cmpwi r4, 0 + bne clear_utlb_entry + + /* Create the entries in the other address space */ + mfmsr r5 + rlwinm r7, r5, 27, 31, 31 /* Get the TS (Bit 26) from MSR */ + xori r7, r7, 1 /* r7 = !TS */ + + insrwi r24, r7, 1, 21 /* Change the TS in the saved TLB word 0 */ + + /* + * write out the TLB entries for the tmp mapping + * Use way '0' so that we could easily invalidate it later. + */ + lis r3, 0x8000 /* Way '0' */ + + tlbwe r24, r3, 0 + tlbwe r25, r3, 1 + tlbwe r26, r3, 2 + + /* Update the msr to the new TS */ + insrwi r5, r7, 1, 26 + + bl 1f +1: mflr r6 + addi r6, r6, (2f-1b) + + mtspr SPRN_SRR0, r6 + mtspr SPRN_SRR1, r5 + rfi + + /* + * Now we are in the tmp address space. + * Create a 1:1 mapping for 0-2GiB in the original TS. + */ +2: + li r3, 0 + li r4, 0 /* TLB Word 0 */ + li r5, 0 /* TLB Word 1 */ + li r6, 0 + ori r6, r6, PPC47x_TLB2_S_RWX /* TLB word 2 */ + + li r8, 0 /* PageIndex */ + + xori r7, r7, 1 /* revert back to original TS */ + +write_utlb: + rotlwi r5, r8, 28 /* RPN = PageIndex * 256M */ + /* ERPN = 0 as we don't use memory above 2G */ + + mr r4, r5 /* EPN = RPN */ + ori r4, r4, (PPC47x_TLB0_VALID | PPC47x_TLB0_256M) + insrwi r4, r7, 1, 21 /* Insert the TS to Word 0 */ + + tlbwe r4, r3, 0 /* Write out the entries */ + tlbwe r5, r3, 1 + tlbwe r6, r3, 2 + addi r8, r8, 1 + cmpwi r8, 8 /* Have we completed ? */ + bne write_utlb + + /* make sure we complete the TLB write up */ + isync + + /* + * Prepare to jump to the 1:1 mapping. + * 1) Extract page size of the tmp mapping + * DSIZ = TLB_Word0[22:27] + * 2) Calculate the physical address of the address + * to jump to. + */ + rlwinm r10, r24, 0, 22, 27 + + cmpwi r10, PPC47x_TLB0_4K + bne 0f + li r10, 0x1000 /* r10 = 4k */ + bl 1f + +0: + /* Defaults to 256M */ + lis r10, 0x1000 + + bl 1f +1: mflr r4 + addi r4, r4, (2f-1b) /* virtual address of 2f */ + + subi r11, r10, 1 /* offsetmask = Pagesize - 1 */ + not r10, r11 /* Pagemask = ~(offsetmask) */ + + and r5, r25, r10 /* Physical page */ + and r6, r4, r11 /* offset within the current page */ + + or r5, r5, r6 /* Physical address for 2f */ + + /* Switch the TS in MSR to the original one */ + mfmsr r8 + insrwi r8, r7, 1, 26 + + mtspr SPRN_SRR1, r8 + mtspr SPRN_SRR0, r5 + rfi + +2: + /* Invalidate the tmp mapping */ + lis r3, 0x8000 /* Way '0' */ + + clrrwi r24, r24, 12 /* Clear the valid bit */ + tlbwe r24, r3, 0 + tlbwe r25, r3, 1 + tlbwe r26, r3, 2 + + /* Make sure we complete the TLB write and flush the shadow TLB */ + isync + +#endif + +ppc44x_map_done: + + + /* Restore the parameters */ + mr r3, r29 + mr r4, r30 + mr r5, r31 + + li r0, 0 +#else + li r0, 0 + + /* + * Set Machine Status Register to a known status, + * switch the MMU off and jump to 1: in a single step. + */ + + mr r8, r0 + ori r8, r8, MSR_RI|MSR_ME + mtspr SPRN_SRR1, r8 + addi r8, r4, 1f - relocate_new_kernel + mtspr SPRN_SRR0, r8 + sync + rfi + +1: +#endif + /* from this point address translation is turned off */ + /* and interrupts are disabled */ + + /* set a new stack at the bottom of our page... */ + /* (not really needed now) */ + addi r1, r4, KEXEC_CONTROL_PAGE_SIZE - 8 /* for LR Save+Back Chain */ + stw r0, 0(r1) + + /* Do the copies */ + li r6, 0 /* checksum */ + mr r0, r3 + b 1f + +0: /* top, read another word for the indirection page */ + lwzu r0, 4(r3) + +1: + /* is it a destination page? (r8) */ + rlwinm. r7, r0, 0, 31, 31 /* IND_DESTINATION (1<<0) */ + beq 2f + + rlwinm r8, r0, 0, 0, 19 /* clear kexec flags, page align */ + b 0b + +2: /* is it an indirection page? (r3) */ + rlwinm. r7, r0, 0, 30, 30 /* IND_INDIRECTION (1<<1) */ + beq 2f + + rlwinm r3, r0, 0, 0, 19 /* clear kexec flags, page align */ + subi r3, r3, 4 + b 0b + +2: /* are we done? */ + rlwinm. r7, r0, 0, 29, 29 /* IND_DONE (1<<2) */ + beq 2f + b 3f + +2: /* is it a source page? (r9) */ + rlwinm. r7, r0, 0, 28, 28 /* IND_SOURCE (1<<3) */ + beq 0b + + rlwinm r9, r0, 0, 0, 19 /* clear kexec flags, page align */ + + li r7, PAGE_SIZE / 4 + mtctr r7 + subi r9, r9, 4 + subi r8, r8, 4 +9: + lwzu r0, 4(r9) /* do the copy */ + xor r6, r6, r0 + stwu r0, 4(r8) + dcbst 0, r8 + sync + icbi 0, r8 + bdnz 9b + + addi r9, r9, 4 + addi r8, r8, 4 + b 0b + +3: + + /* To be certain of avoiding problems with self-modifying code + * execute a serializing instruction here. + */ + isync + sync + + mfspr r3, SPRN_PIR /* current core we are running on */ + mr r4, r5 /* load physical address of chunk called */ + + /* jump to the entry point, usually the setup routine */ + mtlr r5 + blrl + +1: b 1b + +relocate_new_kernel_end: + + .globl relocate_new_kernel_size +relocate_new_kernel_size: + .long relocate_new_kernel_end - relocate_new_kernel diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile index 4c67cc79de7c..2bfeaa13befb 100644 --- a/arch/powerpc/kvm/Makefile +++ b/arch/powerpc/kvm/Makefile @@ -71,6 +71,9 @@ kvm-hv-y += \ book3s_64_mmu_radix.o \ book3s_hv_nested.o +kvm-hv-$(CONFIG_PPC_UV) += \ + book3s_hv_uvmem.o + kvm-hv-$(CONFIG_PPC_TRANSACTIONAL_MEM) += \ book3s_hv_tm.o diff --git a/arch/powerpc/kvm/book3s_64_mmu_radix.c b/arch/powerpc/kvm/book3s_64_mmu_radix.c index 2d415c36a61d..da857c8ba6e4 100644 --- a/arch/powerpc/kvm/book3s_64_mmu_radix.c +++ b/arch/powerpc/kvm/book3s_64_mmu_radix.c @@ -19,6 +19,8 @@ #include <asm/pgtable.h> #include <asm/pgalloc.h> #include <asm/pte-walk.h> +#include <asm/ultravisor.h> +#include <asm/kvm_book3s_uvmem.h> /* * Supported radix tree geometry. @@ -915,6 +917,9 @@ int kvmppc_book3s_radix_page_fault(struct kvm_run *run, struct kvm_vcpu *vcpu, if (!(dsisr & DSISR_PRTABLE_FAULT)) gpa |= ea & 0xfff; + if (kvm->arch.secure_guest & KVMPPC_SECURE_INIT_DONE) + return kvmppc_send_page_to_uv(kvm, gfn); + /* Get the corresponding memslot */ memslot = gfn_to_memslot(kvm, gfn); @@ -972,6 +977,11 @@ int kvm_unmap_radix(struct kvm *kvm, struct kvm_memory_slot *memslot, unsigned long gpa = gfn << PAGE_SHIFT; unsigned int shift; + if (kvm->arch.secure_guest & KVMPPC_SECURE_INIT_DONE) { + uv_page_inval(kvm->arch.lpid, gpa, PAGE_SHIFT); + return 0; + } + ptep = __find_linux_pte(kvm->arch.pgtable, gpa, NULL, &shift); if (ptep && pte_present(*ptep)) kvmppc_unmap_pte(kvm, ptep, gpa, shift, memslot, @@ -989,6 +999,9 @@ int kvm_age_radix(struct kvm *kvm, struct kvm_memory_slot *memslot, int ref = 0; unsigned long old, *rmapp; + if (kvm->arch.secure_guest & KVMPPC_SECURE_INIT_DONE) + return ref; + ptep = __find_linux_pte(kvm->arch.pgtable, gpa, NULL, &shift); if (ptep && pte_present(*ptep) && pte_young(*ptep)) { old = kvmppc_radix_update_pte(kvm, ptep, _PAGE_ACCESSED, 0, @@ -1013,6 +1026,9 @@ int kvm_test_age_radix(struct kvm *kvm, struct kvm_memory_slot *memslot, unsigned int shift; int ref = 0; + if (kvm->arch.secure_guest & KVMPPC_SECURE_INIT_DONE) + return ref; + ptep = __find_linux_pte(kvm->arch.pgtable, gpa, NULL, &shift); if (ptep && pte_present(*ptep) && pte_young(*ptep)) ref = 1; @@ -1030,6 +1046,9 @@ static int kvm_radix_test_clear_dirty(struct kvm *kvm, int ret = 0; unsigned long old, *rmapp; + if (kvm->arch.secure_guest & KVMPPC_SECURE_INIT_DONE) + return ret; + ptep = __find_linux_pte(kvm->arch.pgtable, gpa, NULL, &shift); if (ptep && pte_present(*ptep) && pte_dirty(*ptep)) { ret = 1; @@ -1082,6 +1101,12 @@ void kvmppc_radix_flush_memslot(struct kvm *kvm, unsigned long gpa; unsigned int shift; + if (kvm->arch.secure_guest & KVMPPC_SECURE_INIT_START) + kvmppc_uvmem_drop_pages(memslot, kvm); + + if (kvm->arch.secure_guest & KVMPPC_SECURE_INIT_DONE) + return; + gpa = memslot->base_gfn << PAGE_SHIFT; spin_lock(&kvm->mmu_lock); for (n = memslot->npages; n; --n) { diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index ec5c0379296a..dc53578193ee 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -72,6 +72,9 @@ #include <asm/xics.h> #include <asm/xive.h> #include <asm/hw_breakpoint.h> +#include <asm/kvm_host.h> +#include <asm/kvm_book3s_uvmem.h> +#include <asm/ultravisor.h> #include "book3s.h" @@ -1070,6 +1073,25 @@ int kvmppc_pseries_do_hcall(struct kvm_vcpu *vcpu) kvmppc_get_gpr(vcpu, 5), kvmppc_get_gpr(vcpu, 6)); break; + case H_SVM_PAGE_IN: + ret = kvmppc_h_svm_page_in(vcpu->kvm, + kvmppc_get_gpr(vcpu, 4), + kvmppc_get_gpr(vcpu, 5), + kvmppc_get_gpr(vcpu, 6)); + break; + case H_SVM_PAGE_OUT: + ret = kvmppc_h_svm_page_out(vcpu->kvm, + kvmppc_get_gpr(vcpu, 4), + kvmppc_get_gpr(vcpu, 5), + kvmppc_get_gpr(vcpu, 6)); + break; + case H_SVM_INIT_START: + ret = kvmppc_h_svm_init_start(vcpu->kvm); + break; + case H_SVM_INIT_DONE: + ret = kvmppc_h_svm_init_done(vcpu->kvm); + break; + default: return RESUME_HOST; } @@ -4494,6 +4516,29 @@ static void kvmppc_core_commit_memory_region_hv(struct kvm *kvm, if (change == KVM_MR_FLAGS_ONLY && kvm_is_radix(kvm) && ((new->flags ^ old->flags) & KVM_MEM_LOG_DIRTY_PAGES)) kvmppc_radix_flush_memslot(kvm, old); + /* + * If UV hasn't yet called H_SVM_INIT_START, don't register memslots. + */ + if (!kvm->arch.secure_guest) + return; + + switch (change) { + case KVM_MR_CREATE: + if (kvmppc_uvmem_slot_init(kvm, new)) + return; + uv_register_mem_slot(kvm->arch.lpid, + new->base_gfn << PAGE_SHIFT, + new->npages * PAGE_SIZE, + 0, new->id); + break; + case KVM_MR_DELETE: + uv_unregister_mem_slot(kvm->arch.lpid, old->id); + kvmppc_uvmem_slot_free(kvm, old); + break; + default: + /* TODO: Handle KVM_MR_MOVE */ + break; + } } /* @@ -4767,6 +4812,8 @@ static int kvmppc_core_init_vm_hv(struct kvm *kvm) char buf[32]; int ret; + mutex_init(&kvm->arch.uvmem_lock); + INIT_LIST_HEAD(&kvm->arch.uvmem_pfns); mutex_init(&kvm->arch.mmu_setup_lock); /* Allocate the guest's logical partition ID */ @@ -4936,8 +4983,10 @@ static void kvmppc_core_destroy_vm_hv(struct kvm *kvm) if (nesting_enabled(kvm)) kvmhv_release_all_nested(kvm); kvm->arch.process_table = 0; + uv_svm_terminate(kvm->arch.lpid); kvmhv_set_ptbl_entry(kvm->arch.lpid, 0, 0); } + kvmppc_free_lpid(kvm->arch.lpid); kvmppc_free_pimap(kvm); @@ -5377,6 +5426,94 @@ static int kvmhv_store_to_eaddr(struct kvm_vcpu *vcpu, ulong *eaddr, void *ptr, return rc; } +static void unpin_vpa_reset(struct kvm *kvm, struct kvmppc_vpa *vpa) +{ + unpin_vpa(kvm, vpa); + vpa->gpa = 0; + vpa->pinned_addr = NULL; + vpa->dirty = false; + vpa->update_pending = 0; +} + +/* + * IOCTL handler to turn off secure mode of guest + * + * - Release all device pages + * - Issue ucall to terminate the guest on the UV side + * - Unpin the VPA pages. + * - Reinit the partition scoped page tables + */ +static int kvmhv_svm_off(struct kvm *kvm) +{ + struct kvm_vcpu *vcpu; + int mmu_was_ready; + int srcu_idx; + int ret = 0; + int i; + + if (!(kvm->arch.secure_guest & KVMPPC_SECURE_INIT_START)) + return ret; + + mutex_lock(&kvm->arch.mmu_setup_lock); + mmu_was_ready = kvm->arch.mmu_ready; + if (kvm->arch.mmu_ready) { + kvm->arch.mmu_ready = 0; + /* order mmu_ready vs. vcpus_running */ + smp_mb(); + if (atomic_read(&kvm->arch.vcpus_running)) { + kvm->arch.mmu_ready = 1; + ret = -EBUSY; + goto out; + } + } + + srcu_idx = srcu_read_lock(&kvm->srcu); + for (i = 0; i < KVM_ADDRESS_SPACE_NUM; i++) { + struct kvm_memory_slot *memslot; + struct kvm_memslots *slots = __kvm_memslots(kvm, i); + + if (!slots) + continue; + + kvm_for_each_memslot(memslot, slots) { + kvmppc_uvmem_drop_pages(memslot, kvm); + uv_unregister_mem_slot(kvm->arch.lpid, memslot->id); + } + } + srcu_read_unlock(&kvm->srcu, srcu_idx); + + ret = uv_svm_terminate(kvm->arch.lpid); + if (ret != U_SUCCESS) { + ret = -EINVAL; + goto out; + } + + /* + * When secure guest is reset, all the guest pages are sent + * to UV via UV_PAGE_IN before the non-boot vcpus get a + * chance to run and unpin their VPA pages. Unpinning of all + * VPA pages is done here explicitly so that VPA pages + * can be migrated to the secure side. + * + * This is required to for the secure SMP guest to reboot + * correctly. + */ + kvm_for_each_vcpu(i, vcpu, kvm) { + spin_lock(&vcpu->arch.vpa_update_lock); + unpin_vpa_reset(kvm, &vcpu->arch.dtl); + unpin_vpa_reset(kvm, &vcpu->arch.slb_shadow); + unpin_vpa_reset(kvm, &vcpu->arch.vpa); + spin_unlock(&vcpu->arch.vpa_update_lock); + } + + kvmppc_setup_partition_table(kvm); + kvm->arch.secure_guest = 0; + kvm->arch.mmu_ready = mmu_was_ready; +out: + mutex_unlock(&kvm->arch.mmu_setup_lock); + return ret; +} + static struct kvmppc_ops kvm_ops_hv = { .get_sregs = kvm_arch_vcpu_ioctl_get_sregs_hv, .set_sregs = kvm_arch_vcpu_ioctl_set_sregs_hv, @@ -5420,6 +5557,7 @@ static struct kvmppc_ops kvm_ops_hv = { .enable_nested = kvmhv_enable_nested, .load_from_eaddr = kvmhv_load_from_eaddr, .store_to_eaddr = kvmhv_store_to_eaddr, + .svm_off = kvmhv_svm_off, }; static int kvm_init_subcore_bitmap(void) @@ -5528,11 +5666,16 @@ static int kvmppc_book3s_init_hv(void) no_mixing_hpt_and_radix = true; } + r = kvmppc_uvmem_init(); + if (r < 0) + pr_err("KVM-HV: kvmppc_uvmem_init failed %d\n", r); + return r; } static void kvmppc_book3s_exit_hv(void) { + kvmppc_uvmem_free(); kvmppc_free_host_rm_ops(); if (kvmppc_radix_possible()) kvmppc_radix_exit(); diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index faebcbb8c4db..0496e66aaa56 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -11,6 +11,7 @@ */ #include <asm/ppc_asm.h> +#include <asm/code-patching-asm.h> #include <asm/kvm_asm.h> #include <asm/reg.h> #include <asm/mmu.h> @@ -1487,6 +1488,13 @@ guest_exit_cont: /* r9 = vcpu, r12 = trap, r13 = paca */ 1: #endif /* CONFIG_KVM_XICS */ + /* + * Possibly flush the link stack here, before we do a blr in + * guest_exit_short_path. + */ +1: nop + patch_site 1b patch__call_kvm_flush_link_stack + /* If we came in through the P9 short path, go back out to C now */ lwz r0, STACK_SLOT_SHORT_PATH(r1) cmpwi r0, 0 @@ -1963,6 +1971,28 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) mtlr r0 blr +.balign 32 +.global kvm_flush_link_stack +kvm_flush_link_stack: + /* Save LR into r0 */ + mflr r0 + + /* Flush the link stack. On Power8 it's up to 32 entries in size. */ + .rept 32 + bl .+4 + .endr + + /* And on Power9 it's up to 64. */ +BEGIN_FTR_SECTION + .rept 32 + bl .+4 + .endr +END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) + + /* Restore LR */ + mtlr r0 + blr + kvmppc_guest_external: /* External interrupt, first check for host_ipi. If this is * set, we know the host wants us out so let's do it now diff --git a/arch/powerpc/kvm/book3s_hv_uvmem.c b/arch/powerpc/kvm/book3s_hv_uvmem.c new file mode 100644 index 000000000000..2de264fc3156 --- /dev/null +++ b/arch/powerpc/kvm/book3s_hv_uvmem.c @@ -0,0 +1,785 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Secure pages management: Migration of pages between normal and secure + * memory of KVM guests. + * + * Copyright 2018 Bharata B Rao, IBM Corp. <bharata@linux.ibm.com> + */ + +/* + * A pseries guest can be run as secure guest on Ultravisor-enabled + * POWER platforms. On such platforms, this driver will be used to manage + * the movement of guest pages between the normal memory managed by + * hypervisor (HV) and secure memory managed by Ultravisor (UV). + * + * The page-in or page-out requests from UV will come to HV as hcalls and + * HV will call back into UV via ultracalls to satisfy these page requests. + * + * Private ZONE_DEVICE memory equal to the amount of secure memory + * available in the platform for running secure guests is hotplugged. + * Whenever a page belonging to the guest becomes secure, a page from this + * private device memory is used to represent and track that secure page + * on the HV side. Some pages (like virtio buffers, VPA pages etc) are + * shared between UV and HV. However such pages aren't represented by + * device private memory and mappings to shared memory exist in both + * UV and HV page tables. + */ + +/* + * Notes on locking + * + * kvm->arch.uvmem_lock is a per-guest lock that prevents concurrent + * page-in and page-out requests for the same GPA. Concurrent accesses + * can either come via UV (guest vCPUs requesting for same page) + * or when HV and guest simultaneously access the same page. + * This mutex serializes the migration of page from HV(normal) to + * UV(secure) and vice versa. So the serialization points are around + * migrate_vma routines and page-in/out routines. + * + * Per-guest mutex comes with a cost though. Mainly it serializes the + * fault path as page-out can occur when HV faults on accessing secure + * guest pages. Currently UV issues page-in requests for all the guest + * PFNs one at a time during early boot (UV_ESM uvcall), so this is + * not a cause for concern. Also currently the number of page-outs caused + * by HV touching secure pages is very very low. If an when UV supports + * overcommitting, then we might see concurrent guest driven page-outs. + * + * Locking order + * + * 1. kvm->srcu - Protects KVM memslots + * 2. kvm->mm->mmap_sem - find_vma, migrate_vma_pages and helpers, ksm_madvise + * 3. kvm->arch.uvmem_lock - protects read/writes to uvmem slots thus acting + * as sync-points for page-in/out + */ + +/* + * Notes on page size + * + * Currently UV uses 2MB mappings internally, but will issue H_SVM_PAGE_IN + * and H_SVM_PAGE_OUT hcalls in PAGE_SIZE(64K) granularity. HV tracks + * secure GPAs at 64K page size and maintains one device PFN for each + * 64K secure GPA. UV_PAGE_IN and UV_PAGE_OUT calls by HV are also issued + * for 64K page at a time. + * + * HV faulting on secure pages: When HV touches any secure page, it + * faults and issues a UV_PAGE_OUT request with 64K page size. Currently + * UV splits and remaps the 2MB page if necessary and copies out the + * required 64K page contents. + * + * Shared pages: Whenever guest shares a secure page, UV will split and + * remap the 2MB page if required and issue H_SVM_PAGE_IN with 64K page size. + * + * HV invalidating a page: When a regular page belonging to secure + * guest gets unmapped, HV informs UV with UV_PAGE_INVAL of 64K + * page size. Using 64K page size is correct here because any non-secure + * page will essentially be of 64K page size. Splitting by UV during sharing + * and page-out ensures this. + * + * Page fault handling: When HV handles page fault of a page belonging + * to secure guest, it sends that to UV with a 64K UV_PAGE_IN request. + * Using 64K size is correct here too as UV would have split the 2MB page + * into 64k mappings and would have done page-outs earlier. + * + * In summary, the current secure pages handling code in HV assumes + * 64K page size and in fact fails any page-in/page-out requests of + * non-64K size upfront. If and when UV starts supporting multiple + * page-sizes, we need to break this assumption. + */ + +#include <linux/pagemap.h> +#include <linux/migrate.h> +#include <linux/kvm_host.h> +#include <linux/ksm.h> +#include <asm/ultravisor.h> +#include <asm/mman.h> +#include <asm/kvm_ppc.h> + +static struct dev_pagemap kvmppc_uvmem_pgmap; +static unsigned long *kvmppc_uvmem_bitmap; +static DEFINE_SPINLOCK(kvmppc_uvmem_bitmap_lock); + +#define KVMPPC_UVMEM_PFN (1UL << 63) + +struct kvmppc_uvmem_slot { + struct list_head list; + unsigned long nr_pfns; + unsigned long base_pfn; + unsigned long *pfns; +}; + +struct kvmppc_uvmem_page_pvt { + struct kvm *kvm; + unsigned long gpa; + bool skip_page_out; +}; + +int kvmppc_uvmem_slot_init(struct kvm *kvm, const struct kvm_memory_slot *slot) +{ + struct kvmppc_uvmem_slot *p; + + p = kzalloc(sizeof(*p), GFP_KERNEL); + if (!p) + return -ENOMEM; + p->pfns = vzalloc(array_size(slot->npages, sizeof(*p->pfns))); + if (!p->pfns) { + kfree(p); + return -ENOMEM; + } + p->nr_pfns = slot->npages; + p->base_pfn = slot->base_gfn; + + mutex_lock(&kvm->arch.uvmem_lock); + list_add(&p->list, &kvm->arch.uvmem_pfns); + mutex_unlock(&kvm->arch.uvmem_lock); + + return 0; +} + +/* + * All device PFNs are already released by the time we come here. + */ +void kvmppc_uvmem_slot_free(struct kvm *kvm, const struct kvm_memory_slot *slot) +{ + struct kvmppc_uvmem_slot *p, *next; + + mutex_lock(&kvm->arch.uvmem_lock); + list_for_each_entry_safe(p, next, &kvm->arch.uvmem_pfns, list) { + if (p->base_pfn == slot->base_gfn) { + vfree(p->pfns); + list_del(&p->list); + kfree(p); + break; + } + } + mutex_unlock(&kvm->arch.uvmem_lock); +} + +static void kvmppc_uvmem_pfn_insert(unsigned long gfn, unsigned long uvmem_pfn, + struct kvm *kvm) +{ + struct kvmppc_uvmem_slot *p; + + list_for_each_entry(p, &kvm->arch.uvmem_pfns, list) { + if (gfn >= p->base_pfn && gfn < p->base_pfn + p->nr_pfns) { + unsigned long index = gfn - p->base_pfn; + + p->pfns[index] = uvmem_pfn | KVMPPC_UVMEM_PFN; + return; + } + } +} + +static void kvmppc_uvmem_pfn_remove(unsigned long gfn, struct kvm *kvm) +{ + struct kvmppc_uvmem_slot *p; + + list_for_each_entry(p, &kvm->arch.uvmem_pfns, list) { + if (gfn >= p->base_pfn && gfn < p->base_pfn + p->nr_pfns) { + p->pfns[gfn - p->base_pfn] = 0; + return; + } + } +} + +static bool kvmppc_gfn_is_uvmem_pfn(unsigned long gfn, struct kvm *kvm, + unsigned long *uvmem_pfn) +{ + struct kvmppc_uvmem_slot *p; + + list_for_each_entry(p, &kvm->arch.uvmem_pfns, list) { + if (gfn >= p->base_pfn && gfn < p->base_pfn + p->nr_pfns) { + unsigned long index = gfn - p->base_pfn; + + if (p->pfns[index] & KVMPPC_UVMEM_PFN) { + if (uvmem_pfn) + *uvmem_pfn = p->pfns[index] & + ~KVMPPC_UVMEM_PFN; + return true; + } else + return false; + } + } + return false; +} + +unsigned long kvmppc_h_svm_init_start(struct kvm *kvm) +{ + struct kvm_memslots *slots; + struct kvm_memory_slot *memslot; + int ret = H_SUCCESS; + int srcu_idx; + + if (!kvmppc_uvmem_bitmap) + return H_UNSUPPORTED; + + /* Only radix guests can be secure guests */ + if (!kvm_is_radix(kvm)) + return H_UNSUPPORTED; + + srcu_idx = srcu_read_lock(&kvm->srcu); + slots = kvm_memslots(kvm); + kvm_for_each_memslot(memslot, slots) { + if (kvmppc_uvmem_slot_init(kvm, memslot)) { + ret = H_PARAMETER; + goto out; + } + ret = uv_register_mem_slot(kvm->arch.lpid, + memslot->base_gfn << PAGE_SHIFT, + memslot->npages * PAGE_SIZE, + 0, memslot->id); + if (ret < 0) { + kvmppc_uvmem_slot_free(kvm, memslot); + ret = H_PARAMETER; + goto out; + } + } + kvm->arch.secure_guest |= KVMPPC_SECURE_INIT_START; +out: + srcu_read_unlock(&kvm->srcu, srcu_idx); + return ret; +} + +unsigned long kvmppc_h_svm_init_done(struct kvm *kvm) +{ + if (!(kvm->arch.secure_guest & KVMPPC_SECURE_INIT_START)) + return H_UNSUPPORTED; + + kvm->arch.secure_guest |= KVMPPC_SECURE_INIT_DONE; + pr_info("LPID %d went secure\n", kvm->arch.lpid); + return H_SUCCESS; +} + +/* + * Drop device pages that we maintain for the secure guest + * + * We first mark the pages to be skipped from UV_PAGE_OUT when there + * is HV side fault on these pages. Next we *get* these pages, forcing + * fault on them, do fault time migration to replace the device PTEs in + * QEMU page table with normal PTEs from newly allocated pages. + */ +void kvmppc_uvmem_drop_pages(const struct kvm_memory_slot *free, + struct kvm *kvm) +{ + int i; + struct kvmppc_uvmem_page_pvt *pvt; + unsigned long pfn, uvmem_pfn; + unsigned long gfn = free->base_gfn; + + for (i = free->npages; i; --i, ++gfn) { + struct page *uvmem_page; + + mutex_lock(&kvm->arch.uvmem_lock); + if (!kvmppc_gfn_is_uvmem_pfn(gfn, kvm, &uvmem_pfn)) { + mutex_unlock(&kvm->arch.uvmem_lock); + continue; + } + + uvmem_page = pfn_to_page(uvmem_pfn); + pvt = uvmem_page->zone_device_data; + pvt->skip_page_out = true; + mutex_unlock(&kvm->arch.uvmem_lock); + + pfn = gfn_to_pfn(kvm, gfn); + if (is_error_noslot_pfn(pfn)) + continue; + kvm_release_pfn_clean(pfn); + } +} + +/* + * Get a free device PFN from the pool + * + * Called when a normal page is moved to secure memory (UV_PAGE_IN). Device + * PFN will be used to keep track of the secure page on HV side. + * + * Called with kvm->arch.uvmem_lock held + */ +static struct page *kvmppc_uvmem_get_page(unsigned long gpa, struct kvm *kvm) +{ + struct page *dpage = NULL; + unsigned long bit, uvmem_pfn; + struct kvmppc_uvmem_page_pvt *pvt; + unsigned long pfn_last, pfn_first; + + pfn_first = kvmppc_uvmem_pgmap.res.start >> PAGE_SHIFT; + pfn_last = pfn_first + + (resource_size(&kvmppc_uvmem_pgmap.res) >> PAGE_SHIFT); + + spin_lock(&kvmppc_uvmem_bitmap_lock); + bit = find_first_zero_bit(kvmppc_uvmem_bitmap, + pfn_last - pfn_first); + if (bit >= (pfn_last - pfn_first)) + goto out; + bitmap_set(kvmppc_uvmem_bitmap, bit, 1); + spin_unlock(&kvmppc_uvmem_bitmap_lock); + + pvt = kzalloc(sizeof(*pvt), GFP_KERNEL); + if (!pvt) + goto out_clear; + + uvmem_pfn = bit + pfn_first; + kvmppc_uvmem_pfn_insert(gpa >> PAGE_SHIFT, uvmem_pfn, kvm); + + pvt->gpa = gpa; + pvt->kvm = kvm; + + dpage = pfn_to_page(uvmem_pfn); + dpage->zone_device_data = pvt; + get_page(dpage); + lock_page(dpage); + return dpage; +out_clear: + spin_lock(&kvmppc_uvmem_bitmap_lock); + bitmap_clear(kvmppc_uvmem_bitmap, bit, 1); +out: + spin_unlock(&kvmppc_uvmem_bitmap_lock); + return NULL; +} + +/* + * Alloc a PFN from private device memory pool and copy page from normal + * memory to secure memory using UV_PAGE_IN uvcall. + */ +static int +kvmppc_svm_page_in(struct vm_area_struct *vma, unsigned long start, + unsigned long end, unsigned long gpa, struct kvm *kvm, + unsigned long page_shift, bool *downgrade) +{ + unsigned long src_pfn, dst_pfn = 0; + struct migrate_vma mig; + struct page *spage; + unsigned long pfn; + struct page *dpage; + int ret = 0; + + memset(&mig, 0, sizeof(mig)); + mig.vma = vma; + mig.start = start; + mig.end = end; + mig.src = &src_pfn; + mig.dst = &dst_pfn; + + /* + * We come here with mmap_sem write lock held just for + * ksm_madvise(), otherwise we only need read mmap_sem. + * Hence downgrade to read lock once ksm_madvise() is done. + */ + ret = ksm_madvise(vma, vma->vm_start, vma->vm_end, + MADV_UNMERGEABLE, &vma->vm_flags); + downgrade_write(&kvm->mm->mmap_sem); + *downgrade = true; + if (ret) + return ret; + + ret = migrate_vma_setup(&mig); + if (ret) + return ret; + + if (!(*mig.src & MIGRATE_PFN_MIGRATE)) { + ret = -1; + goto out_finalize; + } + + dpage = kvmppc_uvmem_get_page(gpa, kvm); + if (!dpage) { + ret = -1; + goto out_finalize; + } + + pfn = *mig.src >> MIGRATE_PFN_SHIFT; + spage = migrate_pfn_to_page(*mig.src); + if (spage) + uv_page_in(kvm->arch.lpid, pfn << page_shift, gpa, 0, + page_shift); + + *mig.dst = migrate_pfn(page_to_pfn(dpage)) | MIGRATE_PFN_LOCKED; + migrate_vma_pages(&mig); +out_finalize: + migrate_vma_finalize(&mig); + return ret; +} + +/* + * Shares the page with HV, thus making it a normal page. + * + * - If the page is already secure, then provision a new page and share + * - If the page is a normal page, share the existing page + * + * In the former case, uses dev_pagemap_ops.migrate_to_ram handler + * to unmap the device page from QEMU's page tables. + */ +static unsigned long +kvmppc_share_page(struct kvm *kvm, unsigned long gpa, unsigned long page_shift) +{ + + int ret = H_PARAMETER; + struct page *uvmem_page; + struct kvmppc_uvmem_page_pvt *pvt; + unsigned long pfn; + unsigned long gfn = gpa >> page_shift; + int srcu_idx; + unsigned long uvmem_pfn; + + srcu_idx = srcu_read_lock(&kvm->srcu); + mutex_lock(&kvm->arch.uvmem_lock); + if (kvmppc_gfn_is_uvmem_pfn(gfn, kvm, &uvmem_pfn)) { + uvmem_page = pfn_to_page(uvmem_pfn); + pvt = uvmem_page->zone_device_data; + pvt->skip_page_out = true; + } + +retry: + mutex_unlock(&kvm->arch.uvmem_lock); + pfn = gfn_to_pfn(kvm, gfn); + if (is_error_noslot_pfn(pfn)) + goto out; + + mutex_lock(&kvm->arch.uvmem_lock); + if (kvmppc_gfn_is_uvmem_pfn(gfn, kvm, &uvmem_pfn)) { + uvmem_page = pfn_to_page(uvmem_pfn); + pvt = uvmem_page->zone_device_data; + pvt->skip_page_out = true; + kvm_release_pfn_clean(pfn); + goto retry; + } + + if (!uv_page_in(kvm->arch.lpid, pfn << page_shift, gpa, 0, page_shift)) + ret = H_SUCCESS; + kvm_release_pfn_clean(pfn); + mutex_unlock(&kvm->arch.uvmem_lock); +out: + srcu_read_unlock(&kvm->srcu, srcu_idx); + return ret; +} + +/* + * H_SVM_PAGE_IN: Move page from normal memory to secure memory. + * + * H_PAGE_IN_SHARED flag makes the page shared which means that the same + * memory in is visible from both UV and HV. + */ +unsigned long +kvmppc_h_svm_page_in(struct kvm *kvm, unsigned long gpa, + unsigned long flags, unsigned long page_shift) +{ + bool downgrade = false; + unsigned long start, end; + struct vm_area_struct *vma; + int srcu_idx; + unsigned long gfn = gpa >> page_shift; + int ret; + + if (!(kvm->arch.secure_guest & KVMPPC_SECURE_INIT_START)) + return H_UNSUPPORTED; + + if (page_shift != PAGE_SHIFT) + return H_P3; + + if (flags & ~H_PAGE_IN_SHARED) + return H_P2; + + if (flags & H_PAGE_IN_SHARED) + return kvmppc_share_page(kvm, gpa, page_shift); + + ret = H_PARAMETER; + srcu_idx = srcu_read_lock(&kvm->srcu); + down_write(&kvm->mm->mmap_sem); + + start = gfn_to_hva(kvm, gfn); + if (kvm_is_error_hva(start)) + goto out; + + mutex_lock(&kvm->arch.uvmem_lock); + /* Fail the page-in request of an already paged-in page */ + if (kvmppc_gfn_is_uvmem_pfn(gfn, kvm, NULL)) + goto out_unlock; + + end = start + (1UL << page_shift); + vma = find_vma_intersection(kvm->mm, start, end); + if (!vma || vma->vm_start > start || vma->vm_end < end) + goto out_unlock; + + if (!kvmppc_svm_page_in(vma, start, end, gpa, kvm, page_shift, + &downgrade)) + ret = H_SUCCESS; +out_unlock: + mutex_unlock(&kvm->arch.uvmem_lock); +out: + if (downgrade) + up_read(&kvm->mm->mmap_sem); + else + up_write(&kvm->mm->mmap_sem); + srcu_read_unlock(&kvm->srcu, srcu_idx); + return ret; +} + +/* + * Provision a new page on HV side and copy over the contents + * from secure memory using UV_PAGE_OUT uvcall. + */ +static int +kvmppc_svm_page_out(struct vm_area_struct *vma, unsigned long start, + unsigned long end, unsigned long page_shift, + struct kvm *kvm, unsigned long gpa) +{ + unsigned long src_pfn, dst_pfn = 0; + struct migrate_vma mig; + struct page *dpage, *spage; + struct kvmppc_uvmem_page_pvt *pvt; + unsigned long pfn; + int ret = U_SUCCESS; + + memset(&mig, 0, sizeof(mig)); + mig.vma = vma; + mig.start = start; + mig.end = end; + mig.src = &src_pfn; + mig.dst = &dst_pfn; + + mutex_lock(&kvm->arch.uvmem_lock); + /* The requested page is already paged-out, nothing to do */ + if (!kvmppc_gfn_is_uvmem_pfn(gpa >> page_shift, kvm, NULL)) + goto out; + + ret = migrate_vma_setup(&mig); + if (ret) + return ret; + + spage = migrate_pfn_to_page(*mig.src); + if (!spage || !(*mig.src & MIGRATE_PFN_MIGRATE)) + goto out_finalize; + + if (!is_zone_device_page(spage)) + goto out_finalize; + + dpage = alloc_page_vma(GFP_HIGHUSER, vma, start); + if (!dpage) { + ret = -1; + goto out_finalize; + } + + lock_page(dpage); + pvt = spage->zone_device_data; + pfn = page_to_pfn(dpage); + + /* + * This function is used in two cases: + * - When HV touches a secure page, for which we do UV_PAGE_OUT + * - When a secure page is converted to shared page, we *get* + * the page to essentially unmap the device page. In this + * case we skip page-out. + */ + if (!pvt->skip_page_out) + ret = uv_page_out(kvm->arch.lpid, pfn << page_shift, + gpa, 0, page_shift); + + if (ret == U_SUCCESS) + *mig.dst = migrate_pfn(pfn) | MIGRATE_PFN_LOCKED; + else { + unlock_page(dpage); + __free_page(dpage); + goto out_finalize; + } + + migrate_vma_pages(&mig); +out_finalize: + migrate_vma_finalize(&mig); +out: + mutex_unlock(&kvm->arch.uvmem_lock); + return ret; +} + +/* + * Fault handler callback that gets called when HV touches any page that + * has been moved to secure memory, we ask UV to give back the page by + * issuing UV_PAGE_OUT uvcall. + * + * This eventually results in dropping of device PFN and the newly + * provisioned page/PFN gets populated in QEMU page tables. + */ +static vm_fault_t kvmppc_uvmem_migrate_to_ram(struct vm_fault *vmf) +{ + struct kvmppc_uvmem_page_pvt *pvt = vmf->page->zone_device_data; + + if (kvmppc_svm_page_out(vmf->vma, vmf->address, + vmf->address + PAGE_SIZE, PAGE_SHIFT, + pvt->kvm, pvt->gpa)) + return VM_FAULT_SIGBUS; + else + return 0; +} + +/* + * Release the device PFN back to the pool + * + * Gets called when secure page becomes a normal page during H_SVM_PAGE_OUT. + * Gets called with kvm->arch.uvmem_lock held. + */ +static void kvmppc_uvmem_page_free(struct page *page) +{ + unsigned long pfn = page_to_pfn(page) - + (kvmppc_uvmem_pgmap.res.start >> PAGE_SHIFT); + struct kvmppc_uvmem_page_pvt *pvt; + + spin_lock(&kvmppc_uvmem_bitmap_lock); + bitmap_clear(kvmppc_uvmem_bitmap, pfn, 1); + spin_unlock(&kvmppc_uvmem_bitmap_lock); + + pvt = page->zone_device_data; + page->zone_device_data = NULL; + kvmppc_uvmem_pfn_remove(pvt->gpa >> PAGE_SHIFT, pvt->kvm); + kfree(pvt); +} + +static const struct dev_pagemap_ops kvmppc_uvmem_ops = { + .page_free = kvmppc_uvmem_page_free, + .migrate_to_ram = kvmppc_uvmem_migrate_to_ram, +}; + +/* + * H_SVM_PAGE_OUT: Move page from secure memory to normal memory. + */ +unsigned long +kvmppc_h_svm_page_out(struct kvm *kvm, unsigned long gpa, + unsigned long flags, unsigned long page_shift) +{ + unsigned long gfn = gpa >> page_shift; + unsigned long start, end; + struct vm_area_struct *vma; + int srcu_idx; + int ret; + + if (!(kvm->arch.secure_guest & KVMPPC_SECURE_INIT_START)) + return H_UNSUPPORTED; + + if (page_shift != PAGE_SHIFT) + return H_P3; + + if (flags) + return H_P2; + + ret = H_PARAMETER; + srcu_idx = srcu_read_lock(&kvm->srcu); + down_read(&kvm->mm->mmap_sem); + start = gfn_to_hva(kvm, gfn); + if (kvm_is_error_hva(start)) + goto out; + + end = start + (1UL << page_shift); + vma = find_vma_intersection(kvm->mm, start, end); + if (!vma || vma->vm_start > start || vma->vm_end < end) + goto out; + + if (!kvmppc_svm_page_out(vma, start, end, page_shift, kvm, gpa)) + ret = H_SUCCESS; +out: + up_read(&kvm->mm->mmap_sem); + srcu_read_unlock(&kvm->srcu, srcu_idx); + return ret; +} + +int kvmppc_send_page_to_uv(struct kvm *kvm, unsigned long gfn) +{ + unsigned long pfn; + int ret = U_SUCCESS; + + pfn = gfn_to_pfn(kvm, gfn); + if (is_error_noslot_pfn(pfn)) + return -EFAULT; + + mutex_lock(&kvm->arch.uvmem_lock); + if (kvmppc_gfn_is_uvmem_pfn(gfn, kvm, NULL)) + goto out; + + ret = uv_page_in(kvm->arch.lpid, pfn << PAGE_SHIFT, gfn << PAGE_SHIFT, + 0, PAGE_SHIFT); +out: + kvm_release_pfn_clean(pfn); + mutex_unlock(&kvm->arch.uvmem_lock); + return (ret == U_SUCCESS) ? RESUME_GUEST : -EFAULT; +} + +static u64 kvmppc_get_secmem_size(void) +{ + struct device_node *np; + int i, len; + const __be32 *prop; + u64 size = 0; + + np = of_find_compatible_node(NULL, NULL, "ibm,uv-firmware"); + if (!np) + goto out; + + prop = of_get_property(np, "secure-memory-ranges", &len); + if (!prop) + goto out_put; + + for (i = 0; i < len / (sizeof(*prop) * 4); i++) + size += of_read_number(prop + (i * 4) + 2, 2); + +out_put: + of_node_put(np); +out: + return size; +} + +int kvmppc_uvmem_init(void) +{ + int ret = 0; + unsigned long size; + struct resource *res; + void *addr; + unsigned long pfn_last, pfn_first; + + size = kvmppc_get_secmem_size(); + if (!size) { + /* + * Don't fail the initialization of kvm-hv module if + * the platform doesn't export ibm,uv-firmware node. + * Let normal guests run on such PEF-disabled platform. + */ + pr_info("KVMPPC-UVMEM: No support for secure guests\n"); + goto out; + } + + res = request_free_mem_region(&iomem_resource, size, "kvmppc_uvmem"); + if (IS_ERR(res)) { + ret = PTR_ERR(res); + goto out; + } + + kvmppc_uvmem_pgmap.type = MEMORY_DEVICE_PRIVATE; + kvmppc_uvmem_pgmap.res = *res; + kvmppc_uvmem_pgmap.ops = &kvmppc_uvmem_ops; + addr = memremap_pages(&kvmppc_uvmem_pgmap, NUMA_NO_NODE); + if (IS_ERR(addr)) { + ret = PTR_ERR(addr); + goto out_free_region; + } + + pfn_first = res->start >> PAGE_SHIFT; + pfn_last = pfn_first + (resource_size(res) >> PAGE_SHIFT); + kvmppc_uvmem_bitmap = kcalloc(BITS_TO_LONGS(pfn_last - pfn_first), + sizeof(unsigned long), GFP_KERNEL); + if (!kvmppc_uvmem_bitmap) { + ret = -ENOMEM; + goto out_unmap; + } + + pr_info("KVMPPC-UVMEM: Secure Memory size 0x%lx\n", size); + return ret; +out_unmap: + memunmap_pages(&kvmppc_uvmem_pgmap); +out_free_region: + release_mem_region(res->start, size); +out: + return ret; +} + +void kvmppc_uvmem_free(void) +{ + memunmap_pages(&kvmppc_uvmem_pgmap); + release_mem_region(kvmppc_uvmem_pgmap.res.start, + resource_size(&kvmppc_uvmem_pgmap.res)); + kfree(kvmppc_uvmem_bitmap); +} diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c index 9e085e931d74..416fb3d2a1d0 100644 --- a/arch/powerpc/kvm/powerpc.c +++ b/arch/powerpc/kvm/powerpc.c @@ -31,6 +31,8 @@ #include <asm/hvcall.h> #include <asm/plpar_wrappers.h> #endif +#include <asm/ultravisor.h> +#include <asm/kvm_host.h> #include "timing.h" #include "irq.h" @@ -2413,6 +2415,16 @@ long kvm_arch_vm_ioctl(struct file *filp, r = -EFAULT; break; } + case KVM_PPC_SVM_OFF: { + struct kvm *kvm = filp->private_data; + + r = 0; + if (!kvm->arch.kvm_ops->svm_off) + goto out; + + r = kvm->arch.kvm_ops->svm_off(kvm); + break; + } default: { struct kvm *kvm = filp->private_data; r = kvm->arch.kvm_ops->arch_vm_ioctl(filp, ioctl, arg); diff --git a/arch/powerpc/lib/pmem.c b/arch/powerpc/lib/pmem.c index 377712e85605..0666a8d29596 100644 --- a/arch/powerpc/lib/pmem.c +++ b/arch/powerpc/lib/pmem.c @@ -17,14 +17,14 @@ void arch_wb_cache_pmem(void *addr, size_t size) unsigned long start = (unsigned long) addr; flush_dcache_range(start, start + size); } -EXPORT_SYMBOL(arch_wb_cache_pmem); +EXPORT_SYMBOL_GPL(arch_wb_cache_pmem); void arch_invalidate_pmem(void *addr, size_t size) { unsigned long start = (unsigned long) addr; flush_dcache_range(start, start + size); } -EXPORT_SYMBOL(arch_invalidate_pmem); +EXPORT_SYMBOL_GPL(arch_invalidate_pmem); /* * CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE symbols diff --git a/arch/powerpc/mm/book3s32/mmu.c b/arch/powerpc/mm/book3s32/mmu.c index 84d5fab94f8f..69b2419accef 100644 --- a/arch/powerpc/mm/book3s32/mmu.c +++ b/arch/powerpc/mm/book3s32/mmu.c @@ -251,9 +251,18 @@ void __init setbat(int index, unsigned long virt, phys_addr_t phys, { unsigned int bl; int wimgxpp; - struct ppc_bat *bat = BATS[index]; + struct ppc_bat *bat; unsigned long flags = pgprot_val(prot); + if (index == -1) + index = find_free_bat(); + if (index == -1) { + pr_err("%s: no BAT available for mapping 0x%llx\n", __func__, + (unsigned long long)phys); + return; + } + bat = BATS[index]; + if ((flags & _PAGE_NO_CACHE) || (cpu_has_feature(CPU_FTR_NEED_COHERENT) == 0)) flags &= ~_PAGE_COHERENT; diff --git a/arch/powerpc/mm/book3s64/hash_native.c b/arch/powerpc/mm/book3s64/hash_native.c index 523e42eb11da..d2d8237ea9d5 100644 --- a/arch/powerpc/mm/book3s64/hash_native.c +++ b/arch/powerpc/mm/book3s64/hash_native.c @@ -482,19 +482,12 @@ static long native_hpte_updatepp(unsigned long slot, unsigned long newpp, return ret; } -static long native_hpte_find(unsigned long vpn, int psize, int ssize) +static long __native_hpte_find(unsigned long want_v, unsigned long slot) { struct hash_pte *hptep; - unsigned long hash; + unsigned long hpte_v; unsigned long i; - long slot; - unsigned long want_v, hpte_v; - hash = hpt_hash(vpn, mmu_psize_defs[psize].shift, ssize); - want_v = hpte_encode_avpn(vpn, psize, ssize); - - /* Bolted mappings are only ever in the primary group */ - slot = (hash & htab_hash_mask) * HPTES_PER_GROUP; for (i = 0; i < HPTES_PER_GROUP; i++) { hptep = htab_address + slot; @@ -508,6 +501,33 @@ static long native_hpte_find(unsigned long vpn, int psize, int ssize) return -1; } +static long native_hpte_find(unsigned long vpn, int psize, int ssize) +{ + unsigned long hpte_group; + unsigned long want_v; + unsigned long hash; + long slot; + + hash = hpt_hash(vpn, mmu_psize_defs[psize].shift, ssize); + want_v = hpte_encode_avpn(vpn, psize, ssize); + + /* + * We try to keep bolted entries always in primary hash + * But in some case we can find them in secondary too. + */ + hpte_group = (hash & htab_hash_mask) * HPTES_PER_GROUP; + slot = __native_hpte_find(want_v, hpte_group); + if (slot < 0) { + /* Try in secondary */ + hpte_group = (~hash & htab_hash_mask) * HPTES_PER_GROUP; + slot = __native_hpte_find(want_v, hpte_group); + if (slot < 0) + return -1; + } + + return slot; +} + /* * Update the page protection bits. Intended to be used to create * guard pages for kernel data structures on pages which are bolted diff --git a/arch/powerpc/mm/book3s64/hash_utils.c b/arch/powerpc/mm/book3s64/hash_utils.c index 6c123760164e..b30435c7d804 100644 --- a/arch/powerpc/mm/book3s64/hash_utils.c +++ b/arch/powerpc/mm/book3s64/hash_utils.c @@ -263,6 +263,7 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend, unsigned long vsid = get_kernel_vsid(vaddr, ssize); unsigned long vpn = hpt_vpn(vaddr, vsid, ssize); unsigned long tprot = prot; + bool secondary_hash = false; /* * If we hit a bad address return error. @@ -291,13 +292,31 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend, hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP); BUG_ON(!mmu_hash_ops.hpte_insert); +repeat: ret = mmu_hash_ops.hpte_insert(hpteg, vpn, paddr, tprot, HPTE_V_BOLTED, psize, psize, ssize); + if (ret == -1) { + /* + * Try to to keep bolted entries in primary. + * Remove non bolted entries and try insert again + */ + ret = mmu_hash_ops.hpte_remove(hpteg); + if (ret != -1) + ret = mmu_hash_ops.hpte_insert(hpteg, vpn, paddr, tprot, + HPTE_V_BOLTED, psize, psize, + ssize); + if (ret == -1 && !secondary_hash) { + secondary_hash = true; + hpteg = ((~hash & htab_hash_mask) * HPTES_PER_GROUP); + goto repeat; + } + } if (ret < 0) break; + cond_resched(); #ifdef CONFIG_DEBUG_PAGEALLOC if (debug_pagealloc_enabled() && (paddr >> PAGE_SHIFT) < linear_map_hash_count) diff --git a/arch/powerpc/mm/book3s64/pkeys.c b/arch/powerpc/mm/book3s64/pkeys.c index ae7fca40e5b3..59e0ebbd8036 100644 --- a/arch/powerpc/mm/book3s64/pkeys.c +++ b/arch/powerpc/mm/book3s64/pkeys.c @@ -307,16 +307,6 @@ void thread_pkey_regs_init(struct thread_struct *thread) write_iamr(pkey_iamr_mask); } -static inline bool pkey_allows_readwrite(int pkey) -{ - int pkey_shift = pkeyshift(pkey); - - if (!is_pkey_enabled(pkey)) - return true; - - return !(read_amr() & ((AMR_RD_BIT|AMR_WR_BIT) << pkey_shift)); -} - int __execute_only_pkey(struct mm_struct *mm) { return mm->context.execute_only_pkey; diff --git a/arch/powerpc/mm/book3s64/radix_pgtable.c b/arch/powerpc/mm/book3s64/radix_pgtable.c index 6ee17d09649c..974109bb85db 100644 --- a/arch/powerpc/mm/book3s64/radix_pgtable.c +++ b/arch/powerpc/mm/book3s64/radix_pgtable.c @@ -13,6 +13,7 @@ #include <linux/memblock.h> #include <linux/of_fdt.h> #include <linux/mm.h> +#include <linux/hugetlb.h> #include <linux/string_helpers.h> #include <linux/stop_machine.h> diff --git a/arch/powerpc/mm/book3s64/radix_tlb.c b/arch/powerpc/mm/book3s64/radix_tlb.c index 67af871190c6..a95175c0972b 100644 --- a/arch/powerpc/mm/book3s64/radix_tlb.c +++ b/arch/powerpc/mm/book3s64/radix_tlb.c @@ -732,18 +732,13 @@ local: } preempt_enable(); } + void radix__flush_all_mm(struct mm_struct *mm) { __flush_all_mm(mm, false); } EXPORT_SYMBOL(radix__flush_all_mm); -void radix__flush_tlb_pwc(struct mmu_gather *tlb, unsigned long addr) -{ - tlb->need_flush_all = 1; -} -EXPORT_SYMBOL(radix__flush_tlb_pwc); - void radix__flush_tlb_page_psize(struct mm_struct *mm, unsigned long vmaddr, int psize) { @@ -832,8 +827,7 @@ static unsigned long tlb_single_page_flush_ceiling __read_mostly = 33; static unsigned long tlb_local_single_page_flush_ceiling __read_mostly = POWER9_TLB_SETS_RADIX * 2; static inline void __radix__flush_tlb_range(struct mm_struct *mm, - unsigned long start, unsigned long end, - bool flush_all_sizes) + unsigned long start, unsigned long end) { unsigned long pid; @@ -879,26 +873,16 @@ is_local: } } } else { - bool hflush = flush_all_sizes; - bool gflush = flush_all_sizes; + bool hflush = false; unsigned long hstart, hend; - unsigned long gstart, gend; - if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE)) - hflush = true; - - if (hflush) { + if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE)) { hstart = (start + PMD_SIZE - 1) & PMD_MASK; hend = end & PMD_MASK; if (hstart == hend) hflush = false; - } - - if (gflush) { - gstart = (start + PUD_SIZE - 1) & PUD_MASK; - gend = end & PUD_MASK; - if (gstart == gend) - gflush = false; + else + hflush = true; } if (local) { @@ -907,9 +891,6 @@ is_local: if (hflush) __tlbiel_va_range(hstart, hend, pid, PMD_SIZE, MMU_PAGE_2M); - if (gflush) - __tlbiel_va_range(gstart, gend, pid, - PUD_SIZE, MMU_PAGE_1G); asm volatile("ptesync": : :"memory"); } else if (cputlb_use_tlbie()) { asm volatile("ptesync": : :"memory"); @@ -917,10 +898,6 @@ is_local: if (hflush) __tlbie_va_range(hstart, hend, pid, PMD_SIZE, MMU_PAGE_2M); - if (gflush) - __tlbie_va_range(gstart, gend, pid, - PUD_SIZE, MMU_PAGE_1G); - asm volatile("eieio; tlbsync; ptesync": : :"memory"); } else { _tlbiel_va_range_multicast(mm, @@ -928,9 +905,6 @@ is_local: if (hflush) _tlbiel_va_range_multicast(mm, hstart, hend, pid, PMD_SIZE, MMU_PAGE_2M, false); - if (gflush) - _tlbiel_va_range_multicast(mm, - gstart, gend, pid, PUD_SIZE, MMU_PAGE_1G, false); } } preempt_enable(); @@ -945,7 +919,7 @@ void radix__flush_tlb_range(struct vm_area_struct *vma, unsigned long start, return radix__flush_hugetlb_tlb_range(vma, start, end); #endif - __radix__flush_tlb_range(vma->vm_mm, start, end, false); + __radix__flush_tlb_range(vma->vm_mm, start, end); } EXPORT_SYMBOL(radix__flush_tlb_range); @@ -1021,53 +995,19 @@ void radix__tlb_flush(struct mmu_gather *tlb) * that flushes the process table entry cache upon process teardown. * See the comment for radix in arch_exit_mmap(). */ - if (tlb->fullmm) { + if (tlb->fullmm || tlb->need_flush_all) { __flush_all_mm(mm, true); -#if defined(CONFIG_TRANSPARENT_HUGEPAGE) || defined(CONFIG_HUGETLB_PAGE) - } else if (mm_tlb_flush_nested(mm)) { - /* - * If there is a concurrent invalidation that is clearing ptes, - * then it's possible this invalidation will miss one of those - * cleared ptes and miss flushing the TLB. If this invalidate - * returns before the other one flushes TLBs, that can result - * in it returning while there are still valid TLBs inside the - * range to be invalidated. - * - * See mm/memory.c:tlb_finish_mmu() for more details. - * - * The solution to this is ensure the entire range is always - * flushed here. The problem for powerpc is that the flushes - * are page size specific, so this "forced flush" would not - * do the right thing if there are a mix of page sizes in - * the range to be invalidated. So use __flush_tlb_range - * which invalidates all possible page sizes in the range. - * - * PWC flush probably is not be required because the core code - * shouldn't free page tables in this path, but accounting - * for the possibility makes us a bit more robust. - * - * need_flush_all is an uncommon case because page table - * teardown should be done with exclusive locks held (but - * after locks are dropped another invalidate could come - * in), it could be optimized further if necessary. - */ - if (!tlb->need_flush_all) - __radix__flush_tlb_range(mm, start, end, true); - else - radix__flush_all_mm(mm); -#endif } else if ( (psize = radix_get_mmu_psize(page_size)) == -1) { - if (!tlb->need_flush_all) + if (!tlb->freed_tables) radix__flush_tlb_mm(mm); else radix__flush_all_mm(mm); } else { - if (!tlb->need_flush_all) + if (!tlb->freed_tables) radix__flush_tlb_range_psize(mm, start, end, psize); else radix__flush_tlb_pwc_range_psize(mm, start, end, psize); } - tlb->need_flush_all = 0; } static __always_inline void __radix__flush_tlb_range_psize(struct mm_struct *mm, diff --git a/arch/powerpc/mm/dma-noncoherent.c b/arch/powerpc/mm/dma-noncoherent.c index 2a82984356f8..5ab4f868e919 100644 --- a/arch/powerpc/mm/dma-noncoherent.c +++ b/arch/powerpc/mm/dma-noncoherent.c @@ -104,14 +104,14 @@ static void __dma_sync_page(phys_addr_t paddr, size_t size, int dir) #endif } -void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_device(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { __dma_sync_page(paddr, size, dir); } -void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { __dma_sync_page(paddr, size, dir); } diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index 8432c281de92..b5047f9b5dec 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -645,6 +645,7 @@ NOKPROBE_SYMBOL(do_page_fault); void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig) { const struct exception_table_entry *entry; + int is_write = page_fault_is_write(regs->dsisr); /* Are we prepared to handle this fault? */ if ((entry = search_exception_tables(regs->nip)) != NULL) { @@ -658,9 +659,10 @@ void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig) case 0x300: case 0x380: case 0xe00: - pr_alert("BUG: %s at 0x%08lx\n", + pr_alert("BUG: %s on %s at 0x%08lx\n", regs->dar < PAGE_SIZE ? "Kernel NULL pointer dereference" : - "Unable to handle kernel data access", regs->dar); + "Unable to handle kernel data access", + is_write ? "write" : "read", regs->dar); break; case 0x400: case 0x480: diff --git a/arch/powerpc/mm/init-common.c b/arch/powerpc/mm/init-common.c index a84da92920f7..42ef7a6e6098 100644 --- a/arch/powerpc/mm/init-common.c +++ b/arch/powerpc/mm/init-common.c @@ -21,6 +21,13 @@ #include <asm/pgtable.h> #include <asm/kup.h> +phys_addr_t memstart_addr __ro_after_init = (phys_addr_t)~0ull; +EXPORT_SYMBOL_GPL(memstart_addr); +phys_addr_t kernstart_addr __ro_after_init; +EXPORT_SYMBOL_GPL(kernstart_addr); +unsigned long kernstart_virt_addr __ro_after_init = KERNELBASE; +EXPORT_SYMBOL_GPL(kernstart_virt_addr); + static bool disable_kuep = !IS_ENABLED(CONFIG_PPC_KUEP); static bool disable_kuap = !IS_ENABLED(CONFIG_PPC_KUAP); diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index b04896a88d79..872df48ae41b 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -56,11 +56,6 @@ phys_addr_t total_memory; phys_addr_t total_lowmem; -phys_addr_t memstart_addr = (phys_addr_t)~0ull; -EXPORT_SYMBOL(memstart_addr); -phys_addr_t kernstart_addr; -EXPORT_SYMBOL(kernstart_addr); - #ifdef CONFIG_RELOCATABLE /* Used in __va()/__pa() */ long long virt_phys_offset; diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index 4e08246acd79..4002ced3596f 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -63,38 +63,48 @@ #include <mm/mmu_decl.h> -phys_addr_t memstart_addr = ~0; -EXPORT_SYMBOL_GPL(memstart_addr); -phys_addr_t kernstart_addr; -EXPORT_SYMBOL_GPL(kernstart_addr); - #ifdef CONFIG_SPARSEMEM_VMEMMAP /* - * Given an address within the vmemmap, determine the pfn of the page that - * represents the start of the section it is within. Note that we have to + * Given an address within the vmemmap, determine the page that + * represents the start of the subsection it is within. Note that we have to * do this by hand as the proffered address may not be correctly aligned. * Subtraction of non-aligned pointers produces undefined results. */ -static unsigned long __meminit vmemmap_section_start(unsigned long page) +static struct page * __meminit vmemmap_subsection_start(unsigned long vmemmap_addr) { - unsigned long offset = page - ((unsigned long)(vmemmap)); + unsigned long start_pfn; + unsigned long offset = vmemmap_addr - ((unsigned long)(vmemmap)); /* Return the pfn of the start of the section. */ - return (offset / sizeof(struct page)) & PAGE_SECTION_MASK; + start_pfn = (offset / sizeof(struct page)) & PAGE_SUBSECTION_MASK; + return pfn_to_page(start_pfn); } /* - * Check if this vmemmap page is already initialised. If any section - * which overlaps this vmemmap page is initialised then this page is - * initialised already. + * Since memory is added in sub-section chunks, before creating a new vmemmap + * mapping, the kernel should check whether there is an existing memmap mapping + * covering the new subsection added. This is needed because kernel can map + * vmemmap area using 16MB pages which will cover a memory range of 16G. Such + * a range covers multiple subsections (2M) + * + * If any subsection in the 16G range mapped by vmemmap is valid we consider the + * vmemmap populated (There is a page table entry already present). We can't do + * a page table lookup here because with the hash translation we don't keep + * vmemmap details in linux page table. */ -static int __meminit vmemmap_populated(unsigned long start, int page_size) +static int __meminit vmemmap_populated(unsigned long vmemmap_addr, int vmemmap_map_size) { - unsigned long end = start + page_size; - start = (unsigned long)(pfn_to_page(vmemmap_section_start(start))); + struct page *start; + unsigned long vmemmap_end = vmemmap_addr + vmemmap_map_size; + start = vmemmap_subsection_start(vmemmap_addr); - for (; start < end; start += (PAGES_PER_SECTION * sizeof(struct page))) - if (pfn_valid(page_to_pfn((struct page *)start))) + for (; (unsigned long)start < vmemmap_end; start += PAGES_PER_SUBSECTION) + /* + * pfn valid check here is intended to really check + * whether we have any subsection already initialized + * in this range. + */ + if (pfn_valid(page_to_pfn(start))) return 1; return 0; @@ -201,6 +211,12 @@ int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node, void *p = NULL; int rc; + /* + * This vmemmap range is backing different subsections. If any + * of that subsection is marked valid, that means we already + * have initialized a page table covering this range and hence + * the vmemmap range is populated. + */ if (vmemmap_populated(start, page_size)) continue; @@ -290,9 +306,10 @@ void __ref vmemmap_free(unsigned long start, unsigned long end, struct page *page; /* - * the section has already be marked as invalid, so - * vmemmap_populated() true means some other sections still - * in this page, so skip it. + * We have already marked the subsection we are trying to remove + * invalid. So if we want to remove the vmemmap range, we + * need to make sure there is no subsection marked valid + * in this range. */ if (vmemmap_populated(start, page_size)) continue; diff --git a/arch/powerpc/mm/ioremap_32.c b/arch/powerpc/mm/ioremap_32.c index f36121f25243..743e11384dea 100644 --- a/arch/powerpc/mm/ioremap_32.c +++ b/arch/powerpc/mm/ioremap_32.c @@ -68,6 +68,7 @@ __ioremap_caller(phys_addr_t addr, unsigned long size, pgprot_t prot, void *call /* * Should check if it is a candidate for a BAT mapping */ + pr_warn("ioremap() called early from %pS. Use early_ioremap() instead\n", caller); err = early_ioremap_range(ioremap_bot - size, p, size, prot); if (err) diff --git a/arch/powerpc/mm/ioremap_64.c b/arch/powerpc/mm/ioremap_64.c index fd29e51700cd..50a99d9684f7 100644 --- a/arch/powerpc/mm/ioremap_64.c +++ b/arch/powerpc/mm/ioremap_64.c @@ -81,6 +81,8 @@ void __iomem *__ioremap_caller(phys_addr_t addr, unsigned long size, if (slab_is_available()) return do_ioremap(paligned, offset, size, prot, caller); + pr_warn("ioremap() called early from %pS. Use early_ioremap() instead\n", caller); + err = early_ioremap_range(ioremap_bot, paligned, size, prot); if (err) return NULL; diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index c95b7fe9f298..9488b63dfc87 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -105,6 +105,27 @@ int __weak remove_section_mapping(unsigned long start, unsigned long end) return -ENODEV; } +#define FLUSH_CHUNK_SIZE SZ_1G +/** + * flush_dcache_range_chunked(): Write any modified data cache blocks out to + * memory and invalidate them, in chunks of up to FLUSH_CHUNK_SIZE + * Does not invalidate the corresponding instruction cache blocks. + * + * @start: the start address + * @stop: the stop address (exclusive) + * @chunk: the max size of the chunks + */ +static void flush_dcache_range_chunked(unsigned long start, unsigned long stop, + unsigned long chunk) +{ + unsigned long i; + + for (i = start; i < stop; i += chunk) { + flush_dcache_range(i, min(stop, i + chunk)); + cond_resched(); + } +} + int __ref arch_add_memory(int nid, u64 start, u64 size, struct mhp_restrictions *restrictions) { @@ -121,7 +142,6 @@ int __ref arch_add_memory(int nid, u64 start, u64 size, start, start + size, rc); return -EFAULT; } - flush_dcache_range(start, start + size); return __add_pages(nid, start_pfn, nr_pages, restrictions); } @@ -138,7 +158,8 @@ void __ref arch_remove_memory(int nid, u64 start, u64 size, /* Remove htab bolted mappings for this section of memory */ start = (unsigned long)__va(start); - flush_dcache_range(start, start + size); + flush_dcache_range_chunked(start, start + size, FLUSH_CHUNK_SIZE); + ret = remove_section_mapping(start, start + size); WARN_ON_ONCE(ret); @@ -217,15 +238,13 @@ void __init paging_init(void) unsigned long long total_ram = memblock_phys_mem_size(); phys_addr_t top_of_ram = memblock_end_of_DRAM(); -#ifdef CONFIG_PPC32 - unsigned long v = __fix_to_virt(__end_of_fixed_addresses - 1); - unsigned long end = __fix_to_virt(FIX_HOLE); +#ifdef CONFIG_HIGHMEM + unsigned long v = __fix_to_virt(FIX_KMAP_END); + unsigned long end = __fix_to_virt(FIX_KMAP_BEGIN); for (; v < end; v += PAGE_SIZE) map_kernel_page(v, 0, __pgprot(0)); /* XXX gross */ -#endif -#ifdef CONFIG_HIGHMEM map_kernel_page(PKMAP_BASE, 0, __pgprot(0)); /* XXX gross */ pkmap_page_table = virt_to_kpte(PKMAP_BASE); @@ -328,6 +347,120 @@ void free_initmem(void) free_initmem_default(POISON_FREE_INITMEM); } +/** + * flush_coherent_icache() - if a CPU has a coherent icache, flush it + * @addr: The base address to use (can be any valid address, the whole cache will be flushed) + * Return true if the cache was flushed, false otherwise + */ +static inline bool flush_coherent_icache(unsigned long addr) +{ + /* + * For a snooping icache, we still need a dummy icbi to purge all the + * prefetched instructions from the ifetch buffers. We also need a sync + * before the icbi to order the the actual stores to memory that might + * have modified instructions with the icbi. + */ + if (cpu_has_feature(CPU_FTR_COHERENT_ICACHE)) { + mb(); /* sync */ + icbi((void *)addr); + mb(); /* sync */ + isync(); + return true; + } + + return false; +} + +/** + * invalidate_icache_range() - Flush the icache by issuing icbi across an address range + * @start: the start address + * @stop: the stop address (exclusive) + */ +static void invalidate_icache_range(unsigned long start, unsigned long stop) +{ + unsigned long shift = l1_icache_shift(); + unsigned long bytes = l1_icache_bytes(); + char *addr = (char *)(start & ~(bytes - 1)); + unsigned long size = stop - (unsigned long)addr + (bytes - 1); + unsigned long i; + + for (i = 0; i < size >> shift; i++, addr += bytes) + icbi(addr); + + mb(); /* sync */ + isync(); +} + +/** + * flush_icache_range: Write any modified data cache blocks out to memory + * and invalidate the corresponding blocks in the instruction cache + * + * Generic code will call this after writing memory, before executing from it. + * + * @start: the start address + * @stop: the stop address (exclusive) + */ +void flush_icache_range(unsigned long start, unsigned long stop) +{ + if (flush_coherent_icache(start)) + return; + + clean_dcache_range(start, stop); + + if (IS_ENABLED(CONFIG_44x)) { + /* + * Flash invalidate on 44x because we are passed kmapped + * addresses and this doesn't work for userspace pages due to + * the virtually tagged icache. + */ + iccci((void *)start); + mb(); /* sync */ + isync(); + } else + invalidate_icache_range(start, stop); +} +EXPORT_SYMBOL(flush_icache_range); + +#if !defined(CONFIG_PPC_8xx) && !defined(CONFIG_PPC64) +/** + * flush_dcache_icache_phys() - Flush a page by it's physical address + * @physaddr: the physical address of the page + */ +static void flush_dcache_icache_phys(unsigned long physaddr) +{ + unsigned long bytes = l1_dcache_bytes(); + unsigned long nb = PAGE_SIZE / bytes; + unsigned long addr = physaddr & PAGE_MASK; + unsigned long msr, msr0; + unsigned long loop1 = addr, loop2 = addr; + + msr0 = mfmsr(); + msr = msr0 & ~MSR_DR; + /* + * This must remain as ASM to prevent potential memory accesses + * while the data MMU is disabled + */ + asm volatile( + " mtctr %2;\n" + " mtmsr %3;\n" + " isync;\n" + "0: dcbst 0, %0;\n" + " addi %0, %0, %4;\n" + " bdnz 0b;\n" + " sync;\n" + " mtctr %2;\n" + "1: icbi 0, %1;\n" + " addi %1, %1, %4;\n" + " bdnz 1b;\n" + " sync;\n" + " mtmsr %5;\n" + " isync;\n" + : "+&r" (loop1), "+&r" (loop2) + : "r" (nb), "r" (msr), "i" (bytes), "r" (msr0) + : "ctr", "memory"); +} +#endif // !defined(CONFIG_PPC_8xx) && !defined(CONFIG_PPC64) + /* * This is called when a page has been modified by the kernel. * It just marks the page as not i-cache clean. We do the i-cache @@ -360,12 +493,46 @@ void flush_dcache_icache_page(struct page *page) __flush_dcache_icache(start); kunmap_atomic(start); } else { - __flush_dcache_icache_phys(page_to_pfn(page) << PAGE_SHIFT); + unsigned long addr = page_to_pfn(page) << PAGE_SHIFT; + + if (flush_coherent_icache(addr)) + return; + flush_dcache_icache_phys(addr); } #endif } EXPORT_SYMBOL(flush_dcache_icache_page); +/** + * __flush_dcache_icache(): Flush a particular page from the data cache to RAM. + * Note: this is necessary because the instruction cache does *not* + * snoop from the data cache. + * + * @page: the address of the page to flush + */ +void __flush_dcache_icache(void *p) +{ + unsigned long addr = (unsigned long)p; + + if (flush_coherent_icache(addr)) + return; + + clean_dcache_range(addr, addr + PAGE_SIZE); + + /* + * We don't flush the icache on 44x. Those have a virtual icache and we + * don't have access to the virtual address here (it's not the page + * vaddr but where it's mapped in user space). The flushing of the + * icache on these is handled elsewhere, when a change in the address + * space occurs, before returning to user space. + */ + + if (cpu_has_feature(MMU_FTR_TYPE_44x)) + return; + + invalidate_icache_range(addr, addr + PAGE_SIZE); +} + void clear_user_page(void *page, unsigned long vaddr, struct page *pg) { clear_page(page); diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h index c750ac9ec713..8e99649c24fc 100644 --- a/arch/powerpc/mm/mmu_decl.h +++ b/arch/powerpc/mm/mmu_decl.h @@ -139,10 +139,21 @@ extern unsigned long calc_cam_sz(unsigned long ram, unsigned long virt, extern void adjust_total_lowmem(void); extern int switch_to_as1(void); extern void restore_to_as0(int esel, int offset, void *dt_ptr, int bootcpu); +void create_kaslr_tlb_entry(int entry, unsigned long virt, phys_addr_t phys); +void reloc_kernel_entry(void *fdt, int addr); +extern int is_second_reloc; #endif extern void loadcam_entry(unsigned int index); extern void loadcam_multi(int first_idx, int num, int tmp_idx); +#ifdef CONFIG_RANDOMIZE_BASE +void kaslr_early_init(void *dt_ptr, phys_addr_t size); +void kaslr_late_init(void); +#else +static inline void kaslr_early_init(void *dt_ptr, phys_addr_t size) {} +static inline void kaslr_late_init(void) {} +#endif + struct tlbcam { u32 MAS0; u32 MAS1; diff --git a/arch/powerpc/mm/nohash/8xx.c b/arch/powerpc/mm/nohash/8xx.c index 4a06cb342da2..090af2d2d3e4 100644 --- a/arch/powerpc/mm/nohash/8xx.c +++ b/arch/powerpc/mm/nohash/8xx.c @@ -103,6 +103,19 @@ static void mmu_patch_addis(s32 *site, long simm) patch_instruction_site(site, instr); } +void __init mmu_mapin_ram_chunk(unsigned long offset, unsigned long top, pgprot_t prot) +{ + unsigned long s = offset; + unsigned long v = PAGE_OFFSET + s; + phys_addr_t p = memstart_addr + s; + + for (; s < top; s += PAGE_SIZE) { + map_kernel_page(v, p, prot); + v += PAGE_SIZE; + p += PAGE_SIZE; + } +} + unsigned long __init mmu_mapin_ram(unsigned long base, unsigned long top) { unsigned long mapped; @@ -115,10 +128,20 @@ unsigned long __init mmu_mapin_ram(unsigned long base, unsigned long top) if (!IS_ENABLED(CONFIG_PIN_TLB_TEXT)) mmu_patch_cmp_limit(&patch__itlbmiss_linmem_top, 0); } else { + unsigned long einittext8 = ALIGN(__pa(_einittext), SZ_8M); + mapped = top & ~(LARGE_PAGE_SIZE_8M - 1); if (!IS_ENABLED(CONFIG_PIN_TLB_TEXT)) - mmu_patch_cmp_limit(&patch__itlbmiss_linmem_top, - _ALIGN(__pa(_einittext), 8 << 20)); + mmu_patch_cmp_limit(&patch__itlbmiss_linmem_top, einittext8); + + /* + * Populate page tables to: + * - have them appear in /sys/kernel/debug/kernel_page_tables + * - allow the BDI to find the pages when they are not PINNED + */ + mmu_mapin_ram_chunk(0, einittext8, PAGE_KERNEL_X); + mmu_mapin_ram_chunk(einittext8, mapped, PAGE_KERNEL); + mmu_mapin_immr(); } mmu_patch_cmp_limit(&patch__dtlbmiss_linmem_top, mapped); @@ -144,18 +167,41 @@ void mmu_mark_initmem_nx(void) if (IS_ENABLED(CONFIG_STRICT_KERNEL_RWX) && CONFIG_ETEXT_SHIFT < 23) mmu_patch_addis(&patch__itlbmiss_linmem_top8, -((long)_etext & ~(LARGE_PAGE_SIZE_8M - 1))); - if (!IS_ENABLED(CONFIG_PIN_TLB_TEXT)) + if (!IS_ENABLED(CONFIG_PIN_TLB_TEXT)) { + unsigned long einittext8 = ALIGN(__pa(_einittext), SZ_8M); + unsigned long etext8 = ALIGN(__pa(_etext), SZ_8M); + unsigned long etext = __pa(_etext); + mmu_patch_cmp_limit(&patch__itlbmiss_linmem_top, __pa(_etext)); + + /* Update page tables for PTDUMP and BDI */ + mmu_mapin_ram_chunk(0, einittext8, __pgprot(0)); + if (IS_ENABLED(CONFIG_STRICT_KERNEL_RWX)) { + mmu_mapin_ram_chunk(0, etext, PAGE_KERNEL_TEXT); + mmu_mapin_ram_chunk(etext, einittext8, PAGE_KERNEL); + } else { + mmu_mapin_ram_chunk(0, etext8, PAGE_KERNEL_TEXT); + mmu_mapin_ram_chunk(etext8, einittext8, PAGE_KERNEL); + } + } } #ifdef CONFIG_STRICT_KERNEL_RWX void mmu_mark_rodata_ro(void) { + unsigned long sinittext = __pa(_sinittext); + unsigned long etext = __pa(_etext); + if (CONFIG_DATA_SHIFT < 23) mmu_patch_addis(&patch__dtlbmiss_romem_top8, -__pa(((unsigned long)_sinittext) & ~(LARGE_PAGE_SIZE_8M - 1))); mmu_patch_addis(&patch__dtlbmiss_romem_top, -__pa(_sinittext)); + + /* Update page tables for PTDUMP and BDI */ + mmu_mapin_ram_chunk(0, sinittext, __pgprot(0)); + mmu_mapin_ram_chunk(0, etext, PAGE_KERNEL_ROX); + mmu_mapin_ram_chunk(etext, sinittext, PAGE_KERNEL_RO); } #endif diff --git a/arch/powerpc/mm/nohash/Makefile b/arch/powerpc/mm/nohash/Makefile index 33b6f6f29d3f..0424f6ce5bd8 100644 --- a/arch/powerpc/mm/nohash/Makefile +++ b/arch/powerpc/mm/nohash/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_40x) += 40x.o obj-$(CONFIG_44x) += 44x.o obj-$(CONFIG_PPC_8xx) += 8xx.o obj-$(CONFIG_PPC_FSL_BOOK3E) += fsl_booke.o +obj-$(CONFIG_RANDOMIZE_BASE) += kaslr_booke.o ifdef CONFIG_HUGETLB_PAGE obj-$(CONFIG_PPC_FSL_BOOK3E) += book3e_hugetlbpage.o endif diff --git a/arch/powerpc/mm/nohash/fsl_booke.c b/arch/powerpc/mm/nohash/fsl_booke.c index 556e3cd52a35..b4eb06ceb189 100644 --- a/arch/powerpc/mm/nohash/fsl_booke.c +++ b/arch/powerpc/mm/nohash/fsl_booke.c @@ -263,11 +263,13 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base, int __initdata is_second_reloc; notrace void __init relocate_init(u64 dt_ptr, phys_addr_t start) { - unsigned long base = KERNELBASE; + unsigned long base = kernstart_virt_addr; + phys_addr_t size; kernstart_addr = start; if (is_second_reloc) { virt_phys_offset = PAGE_OFFSET - memstart_addr; + kaslr_late_init(); return; } @@ -291,7 +293,7 @@ notrace void __init relocate_init(u64 dt_ptr, phys_addr_t start) start &= ~0x3ffffff; base &= ~0x3ffffff; virt_phys_offset = base - start; - early_get_first_memblock_info(__va(dt_ptr), NULL); + early_get_first_memblock_info(__va(dt_ptr), &size); /* * We now get the memstart_addr, then we should check if this * address is the same as what the PAGE_OFFSET map to now. If @@ -316,6 +318,8 @@ notrace void __init relocate_init(u64 dt_ptr, phys_addr_t start) /* We should never reach here */ panic("Relocation error"); } + + kaslr_early_init(__va(dt_ptr), size); } #endif #endif diff --git a/arch/powerpc/mm/nohash/kaslr_booke.c b/arch/powerpc/mm/nohash/kaslr_booke.c new file mode 100644 index 000000000000..4a75f2d9bf0e --- /dev/null +++ b/arch/powerpc/mm/nohash/kaslr_booke.c @@ -0,0 +1,401 @@ +// SPDX-License-Identifier: GPL-2.0-only +// +// Copyright (C) 2019 Jason Yan <yanaijie@huawei.com> + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/types.h> +#include <linux/mm.h> +#include <linux/swap.h> +#include <linux/stddef.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/memblock.h> +#include <linux/libfdt.h> +#include <linux/crash_core.h> +#include <asm/pgalloc.h> +#include <asm/prom.h> +#include <asm/kdump.h> +#include <mm/mmu_decl.h> +#include <generated/compile.h> +#include <generated/utsrelease.h> + +struct regions { + unsigned long pa_start; + unsigned long pa_end; + unsigned long kernel_size; + unsigned long dtb_start; + unsigned long dtb_end; + unsigned long initrd_start; + unsigned long initrd_end; + unsigned long crash_start; + unsigned long crash_end; + int reserved_mem; + int reserved_mem_addr_cells; + int reserved_mem_size_cells; +}; + +/* Simplified build-specific string for starting entropy. */ +static const char build_str[] = UTS_RELEASE " (" LINUX_COMPILE_BY "@" + LINUX_COMPILE_HOST ") (" LINUX_COMPILER ") " UTS_VERSION; + +struct regions __initdata regions; + +static __init void kaslr_get_cmdline(void *fdt) +{ + int node = fdt_path_offset(fdt, "/chosen"); + + early_init_dt_scan_chosen(node, "chosen", 1, boot_command_line); +} + +static unsigned long __init rotate_xor(unsigned long hash, const void *area, + size_t size) +{ + size_t i; + const unsigned long *ptr = area; + + for (i = 0; i < size / sizeof(hash); i++) { + /* Rotate by odd number of bits and XOR. */ + hash = (hash << ((sizeof(hash) * 8) - 7)) | (hash >> 7); + hash ^= ptr[i]; + } + + return hash; +} + +/* Attempt to create a simple starting entropy. This can make it defferent for + * every build but it is still not enough. Stronger entropy should + * be added to make it change for every boot. + */ +static unsigned long __init get_boot_seed(void *fdt) +{ + unsigned long hash = 0; + + hash = rotate_xor(hash, build_str, sizeof(build_str)); + hash = rotate_xor(hash, fdt, fdt_totalsize(fdt)); + + return hash; +} + +static __init u64 get_kaslr_seed(void *fdt) +{ + int node, len; + fdt64_t *prop; + u64 ret; + + node = fdt_path_offset(fdt, "/chosen"); + if (node < 0) + return 0; + + prop = fdt_getprop_w(fdt, node, "kaslr-seed", &len); + if (!prop || len != sizeof(u64)) + return 0; + + ret = fdt64_to_cpu(*prop); + *prop = 0; + return ret; +} + +static __init bool regions_overlap(u32 s1, u32 e1, u32 s2, u32 e2) +{ + return e1 >= s2 && e2 >= s1; +} + +static __init bool overlaps_reserved_region(const void *fdt, u32 start, + u32 end) +{ + int subnode, len, i; + u64 base, size; + + /* check for overlap with /memreserve/ entries */ + for (i = 0; i < fdt_num_mem_rsv(fdt); i++) { + if (fdt_get_mem_rsv(fdt, i, &base, &size) < 0) + continue; + if (regions_overlap(start, end, base, base + size)) + return true; + } + + if (regions.reserved_mem < 0) + return false; + + /* check for overlap with static reservations in /reserved-memory */ + for (subnode = fdt_first_subnode(fdt, regions.reserved_mem); + subnode >= 0; + subnode = fdt_next_subnode(fdt, subnode)) { + const fdt32_t *reg; + u64 rsv_end; + + len = 0; + reg = fdt_getprop(fdt, subnode, "reg", &len); + while (len >= (regions.reserved_mem_addr_cells + + regions.reserved_mem_size_cells)) { + base = fdt32_to_cpu(reg[0]); + if (regions.reserved_mem_addr_cells == 2) + base = (base << 32) | fdt32_to_cpu(reg[1]); + + reg += regions.reserved_mem_addr_cells; + len -= 4 * regions.reserved_mem_addr_cells; + + size = fdt32_to_cpu(reg[0]); + if (regions.reserved_mem_size_cells == 2) + size = (size << 32) | fdt32_to_cpu(reg[1]); + + reg += regions.reserved_mem_size_cells; + len -= 4 * regions.reserved_mem_size_cells; + + if (base >= regions.pa_end) + continue; + + rsv_end = min(base + size, (u64)U32_MAX); + + if (regions_overlap(start, end, base, rsv_end)) + return true; + } + } + return false; +} + +static __init bool overlaps_region(const void *fdt, u32 start, + u32 end) +{ + if (regions_overlap(start, end, __pa(_stext), __pa(_end))) + return true; + + if (regions_overlap(start, end, regions.dtb_start, + regions.dtb_end)) + return true; + + if (regions_overlap(start, end, regions.initrd_start, + regions.initrd_end)) + return true; + + if (regions_overlap(start, end, regions.crash_start, + regions.crash_end)) + return true; + + return overlaps_reserved_region(fdt, start, end); +} + +static void __init get_crash_kernel(void *fdt, unsigned long size) +{ +#ifdef CONFIG_CRASH_CORE + unsigned long long crash_size, crash_base; + int ret; + + ret = parse_crashkernel(boot_command_line, size, &crash_size, + &crash_base); + if (ret != 0 || crash_size == 0) + return; + if (crash_base == 0) + crash_base = KDUMP_KERNELBASE; + + regions.crash_start = (unsigned long)crash_base; + regions.crash_end = (unsigned long)(crash_base + crash_size); + + pr_debug("crash_base=0x%llx crash_size=0x%llx\n", crash_base, crash_size); +#endif +} + +static void __init get_initrd_range(void *fdt) +{ + u64 start, end; + int node, len; + const __be32 *prop; + + node = fdt_path_offset(fdt, "/chosen"); + if (node < 0) + return; + + prop = fdt_getprop(fdt, node, "linux,initrd-start", &len); + if (!prop) + return; + start = of_read_number(prop, len / 4); + + prop = fdt_getprop(fdt, node, "linux,initrd-end", &len); + if (!prop) + return; + end = of_read_number(prop, len / 4); + + regions.initrd_start = (unsigned long)start; + regions.initrd_end = (unsigned long)end; + + pr_debug("initrd_start=0x%llx initrd_end=0x%llx\n", start, end); +} + +static __init unsigned long get_usable_address(const void *fdt, + unsigned long start, + unsigned long offset) +{ + unsigned long pa; + unsigned long pa_end; + + for (pa = offset; (long)pa > (long)start; pa -= SZ_16K) { + pa_end = pa + regions.kernel_size; + if (overlaps_region(fdt, pa, pa_end)) + continue; + + return pa; + } + return 0; +} + +static __init void get_cell_sizes(const void *fdt, int node, int *addr_cells, + int *size_cells) +{ + const int *prop; + int len; + + /* + * Retrieve the #address-cells and #size-cells properties + * from the 'node', or use the default if not provided. + */ + *addr_cells = *size_cells = 1; + + prop = fdt_getprop(fdt, node, "#address-cells", &len); + if (len == 4) + *addr_cells = fdt32_to_cpu(*prop); + prop = fdt_getprop(fdt, node, "#size-cells", &len); + if (len == 4) + *size_cells = fdt32_to_cpu(*prop); +} + +static unsigned long __init kaslr_legal_offset(void *dt_ptr, unsigned long index, + unsigned long offset) +{ + unsigned long koffset = 0; + unsigned long start; + + while ((long)index >= 0) { + offset = memstart_addr + index * SZ_64M + offset; + start = memstart_addr + index * SZ_64M; + koffset = get_usable_address(dt_ptr, start, offset); + if (koffset) + break; + index--; + } + + if (koffset != 0) + koffset -= memstart_addr; + + return koffset; +} + +static inline __init bool kaslr_disabled(void) +{ + return strstr(boot_command_line, "nokaslr") != NULL; +} + +static unsigned long __init kaslr_choose_location(void *dt_ptr, phys_addr_t size, + unsigned long kernel_sz) +{ + unsigned long offset, random; + unsigned long ram, linear_sz; + u64 seed; + unsigned long index; + + kaslr_get_cmdline(dt_ptr); + if (kaslr_disabled()) + return 0; + + random = get_boot_seed(dt_ptr); + + seed = get_tb() << 32; + seed ^= get_tb(); + random = rotate_xor(random, &seed, sizeof(seed)); + + /* + * Retrieve (and wipe) the seed from the FDT + */ + seed = get_kaslr_seed(dt_ptr); + if (seed) + random = rotate_xor(random, &seed, sizeof(seed)); + else + pr_warn("KASLR: No safe seed for randomizing the kernel base.\n"); + + ram = min_t(phys_addr_t, __max_low_memory, size); + ram = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM, true); + linear_sz = min_t(unsigned long, ram, SZ_512M); + + /* If the linear size is smaller than 64M, do not randmize */ + if (linear_sz < SZ_64M) + return 0; + + /* check for a reserved-memory node and record its cell sizes */ + regions.reserved_mem = fdt_path_offset(dt_ptr, "/reserved-memory"); + if (regions.reserved_mem >= 0) + get_cell_sizes(dt_ptr, regions.reserved_mem, + ®ions.reserved_mem_addr_cells, + ®ions.reserved_mem_size_cells); + + regions.pa_start = memstart_addr; + regions.pa_end = memstart_addr + linear_sz; + regions.dtb_start = __pa(dt_ptr); + regions.dtb_end = __pa(dt_ptr) + fdt_totalsize(dt_ptr); + regions.kernel_size = kernel_sz; + + get_initrd_range(dt_ptr); + get_crash_kernel(dt_ptr, ram); + + /* + * Decide which 64M we want to start + * Only use the low 8 bits of the random seed + */ + index = random & 0xFF; + index %= linear_sz / SZ_64M; + + /* Decide offset inside 64M */ + offset = random % (SZ_64M - kernel_sz); + offset = round_down(offset, SZ_16K); + + return kaslr_legal_offset(dt_ptr, index, offset); +} + +/* + * To see if we need to relocate the kernel to a random offset + * void *dt_ptr - address of the device tree + * phys_addr_t size - size of the first memory block + */ +notrace void __init kaslr_early_init(void *dt_ptr, phys_addr_t size) +{ + unsigned long tlb_virt; + phys_addr_t tlb_phys; + unsigned long offset; + unsigned long kernel_sz; + + kernel_sz = (unsigned long)_end - (unsigned long)_stext; + + offset = kaslr_choose_location(dt_ptr, size, kernel_sz); + if (offset == 0) + return; + + kernstart_virt_addr += offset; + kernstart_addr += offset; + + is_second_reloc = 1; + + if (offset >= SZ_64M) { + tlb_virt = round_down(kernstart_virt_addr, SZ_64M); + tlb_phys = round_down(kernstart_addr, SZ_64M); + + /* Create kernel map to relocate in */ + create_kaslr_tlb_entry(1, tlb_virt, tlb_phys); + } + + /* Copy the kernel to it's new location and run */ + memcpy((void *)kernstart_virt_addr, (void *)_stext, kernel_sz); + flush_icache_range(kernstart_virt_addr, kernstart_virt_addr + kernel_sz); + + reloc_kernel_entry(dt_ptr, kernstart_virt_addr); +} + +void __init kaslr_late_init(void) +{ + /* If randomized, clear the original kernel */ + if (kernstart_virt_addr != KERNELBASE) { + unsigned long kernel_sz; + + kernel_sz = (unsigned long)_end - kernstart_virt_addr; + memzero_explicit((void *)KERNELBASE, kernel_sz); + } +} diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index 8ec5dfb65b2e..73b84166d06a 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -117,10 +117,7 @@ void __init mapin_ram(void) if (base >= top) continue; base = mmu_mapin_ram(base, top); - if (IS_ENABLED(CONFIG_BDI_SWITCH)) - __mapin_ram_chunk(reg->base, top); - else - __mapin_ram_chunk(base, top); + __mapin_ram_chunk(base, top); } } diff --git a/arch/powerpc/perf/callchain.c b/arch/powerpc/perf/callchain.c index c84bbd4298a0..35d542515faf 100644 --- a/arch/powerpc/perf/callchain.c +++ b/arch/powerpc/perf/callchain.c @@ -284,16 +284,6 @@ static void perf_callchain_user_64(struct perf_callchain_entry_ctx *entry, } } -static inline int current_is_64bit(void) -{ - /* - * We can't use test_thread_flag() here because we may be on an - * interrupt stack, and the thread flags don't get copied over - * from the thread_info on the main stack to the interrupt stack. - */ - return !test_ti_thread_flag(task_thread_info(current), TIF_32BIT); -} - #else /* CONFIG_PPC64 */ /* * On 32-bit we just access the address and let hash_page create a @@ -321,11 +311,6 @@ static inline void perf_callchain_user_64(struct perf_callchain_entry_ctx *entry { } -static inline int current_is_64bit(void) -{ - return 0; -} - static inline int valid_user_sp(unsigned long sp, int is_64) { if (!sp || (sp & 7) || sp > TASK_SIZE - 32) @@ -486,7 +471,7 @@ static void perf_callchain_user_32(struct perf_callchain_entry_ctx *entry, void perf_callchain_user(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs) { - if (current_is_64bit()) + if (!is_32bit_task()) perf_callchain_user_64(entry, regs); else perf_callchain_user_32(entry, regs); diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c index ba12dc14a3d1..8c0d324f657e 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c @@ -650,6 +650,7 @@ static const struct file_operations mpc52xx_wdt_fops = { .llseek = no_llseek, .write = mpc52xx_wdt_write, .unlocked_ioctl = mpc52xx_wdt_ioctl, + .compat_ioctl = compat_ptr_ioctl, .open = mpc52xx_wdt_open, .release = mpc52xx_wdt_release, }; diff --git a/arch/powerpc/platforms/83xx/misc.c b/arch/powerpc/platforms/83xx/misc.c index f46d7bf3b140..6399865a625e 100644 --- a/arch/powerpc/platforms/83xx/misc.c +++ b/arch/powerpc/platforms/83xx/misc.c @@ -18,6 +18,8 @@ #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> +#include <mm/mmu_decl.h> + #include "mpc83xx.h" static __be32 __iomem *restart_reg_base; @@ -145,6 +147,15 @@ void __init mpc83xx_setup_arch(void) if (ppc_md.progress) ppc_md.progress("mpc83xx_setup_arch()", 0); + if (!__map_without_bats) { + phys_addr_t immrbase = get_immrbase(); + int immrsize = IS_ALIGNED(immrbase, SZ_2M) ? SZ_2M : SZ_1M; + unsigned long va = fix_to_virt(FIX_IMMR_BASE); + + setbat(-1, va, immrbase, immrsize, PAGE_KERNEL_NCG); + update_bats(); + } + mpc83xx_setup_pci(); } diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c index 4a4efa906d35..240a26d88b07 100644 --- a/arch/powerpc/platforms/83xx/mpc836x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c @@ -39,7 +39,6 @@ #include <asm/udbg.h> #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> -#include <sysdev/simple_gpio.h> #include <soc/fsl/qe/qe.h> #include <soc/fsl/qe/qe_ic.h> @@ -181,12 +180,6 @@ static int __init mpc836x_usb_cfg(void) qe_usb_clock_set(QE_CLK21, 48000000); } else { setbits8(&bcsr[13], BCSR13_USBMODE); - /* - * The BCSR GPIOs are used to control power and - * speed of the USB transceiver. This is needed for - * the USB Host only. - */ - simple_gpiochip_init("fsl,mpc8360mds-bcsr-gpio"); } of_node_put(np); diff --git a/arch/powerpc/platforms/85xx/common.c b/arch/powerpc/platforms/85xx/common.c index fe0606439b5a..a554b6d87cf7 100644 --- a/arch/powerpc/platforms/85xx/common.c +++ b/arch/powerpc/platforms/85xx/common.c @@ -86,29 +86,6 @@ void __init mpc85xx_cpm2_pic_init(void) #endif #ifdef CONFIG_QUICC_ENGINE -void __init mpc85xx_qe_init(void) -{ - struct device_node *np; - - np = of_find_compatible_node(NULL, NULL, "fsl,qe"); - if (!np) { - np = of_find_node_by_name(NULL, "qe"); - if (!np) { - pr_err("%s: Could not find Quicc Engine node\n", - __func__); - return; - } - } - - if (!of_device_is_available(np)) { - of_node_put(np); - return; - } - - of_node_put(np); - -} - void __init mpc85xx_qe_par_io_init(void) { struct device_node *np; diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c index 7ee2c6628f64..a328a741b457 100644 --- a/arch/powerpc/platforms/85xx/corenet_generic.c +++ b/arch/powerpc/platforms/85xx/corenet_generic.c @@ -66,8 +66,6 @@ void __init corenet_gen_setup_arch(void) swiotlb_detect_4g(); pr_info("%s board\n", ppc_md.name); - - mpc85xx_qe_init(); } static const struct of_device_id of_device_ids[] = { diff --git a/arch/powerpc/platforms/85xx/mpc85xx.h b/arch/powerpc/platforms/85xx/mpc85xx.h index fa23f9b0592c..cb84c5c56c36 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx.h +++ b/arch/powerpc/platforms/85xx/mpc85xx.h @@ -10,10 +10,8 @@ static inline void __init mpc85xx_cpm2_pic_init(void) {} #endif /* CONFIG_CPM2 */ #ifdef CONFIG_QUICC_ENGINE -extern void mpc85xx_qe_init(void); extern void mpc85xx_qe_par_io_init(void); #else -static inline void __init mpc85xx_qe_init(void) {} static inline void __init mpc85xx_qe_par_io_init(void) {} #endif diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index 5ca254256c47..381a6ac8cb4b 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -43,7 +43,6 @@ #include <asm/udbg.h> #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> -#include <sysdev/simple_gpio.h> #include <soc/fsl/qe/qe.h> #include <soc/fsl/qe/qe_ic.h> #include <asm/mpic.h> @@ -238,7 +237,6 @@ static void __init mpc85xx_mds_qe_init(void) { struct device_node *np; - mpc85xx_qe_init(); mpc85xx_qe_par_io_init(); mpc85xx_mds_reset_ucc_phys(); @@ -351,11 +349,6 @@ machine_arch_initcall(mpc8569_mds, board_fixups); static int __init mpc85xx_publish_devices(void) { - if (machine_is(mpc8568_mds)) - simple_gpiochip_init("fsl,mpc8568mds-bcsr-gpio"); - if (machine_is(mpc8569_mds)) - simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio"); - return mpc85xx_common_publish_devices(); } diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c index d3c540ee558f..7f9a84f85766 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c @@ -89,7 +89,6 @@ static void __init mpc85xx_rdb_setup_arch(void) fsl_pci_assign_primary(); #ifdef CONFIG_QUICC_ENGINE - mpc85xx_qe_init(); mpc85xx_qe_par_io_init(); #if defined(CONFIG_UCC_GETH) || defined(CONFIG_SERIAL_QE) if (machine_is(p1025_rdb)) { diff --git a/arch/powerpc/platforms/85xx/twr_p102x.c b/arch/powerpc/platforms/85xx/twr_p102x.c index 720b0c0f03ba..6c3c0cdaee9a 100644 --- a/arch/powerpc/platforms/85xx/twr_p102x.c +++ b/arch/powerpc/platforms/85xx/twr_p102x.c @@ -72,7 +72,6 @@ static void __init twr_p1025_setup_arch(void) fsl_pci_assign_primary(); #ifdef CONFIG_QUICC_ENGINE - mpc85xx_qe_init(); mpc85xx_qe_par_io_init(); #if IS_ENABLED(CONFIG_UCC_GETH) || IS_ENABLED(CONFIG_SERIAL_QE) diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c index 96b27f6fdd0f..7733d0607da2 100644 --- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c +++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c @@ -34,7 +34,6 @@ #include <linux/of_platform.h> #include <sysdev/fsl_pci.h> #include <sysdev/fsl_soc.h> -#include <sysdev/simple_gpio.h> #include "mpc86xx.h" @@ -93,9 +92,6 @@ static const struct of_device_id mpc8610_ids[] __initconst = { static int __init mpc8610_declare_of_platform_devices(void) { - /* Firstly, register PIXIS GPIOs. */ - simple_gpiochip_init("fsl,fpga-pixis-gpio-bank"); - /* Enable wakeup on PIXIS' event IRQ. */ mpc8610_suspend_init(); diff --git a/arch/powerpc/platforms/8xx/cpm1.c b/arch/powerpc/platforms/8xx/cpm1.c index 0f65c51271db..a43ee7d1ff85 100644 --- a/arch/powerpc/platforms/8xx/cpm1.c +++ b/arch/powerpc/platforms/8xx/cpm1.c @@ -51,7 +51,7 @@ #define CPM_MAP_SIZE (0x4000) cpm8xx_t __iomem *cpmp; /* Pointer to comm processor space */ -immap_t __iomem *mpc8xx_immr; +immap_t __iomem *mpc8xx_immr = (void __iomem *)VIRT_IMMR_BASE; static cpic8xx_t __iomem *cpic_reg; static struct irq_domain *cpm_pic_host; @@ -130,7 +130,7 @@ static const struct irq_domain_ops cpm_pic_host_ops = { .map = cpm_pic_host_map, }; -unsigned int cpm_pic_init(void) +unsigned int __init cpm_pic_init(void) { struct device_node *np = NULL; struct resource res; @@ -201,12 +201,6 @@ void __init cpm_reset(void) { sysconf8xx_t __iomem *siu_conf; - mpc8xx_immr = ioremap(get_immrbase(), 0x4000); - if (!mpc8xx_immr) { - printk(KERN_CRIT "Could not map IMMR\n"); - return; - } - cpmp = &mpc8xx_immr->im_cpm; #ifndef CONFIG_PPC_EARLY_DEBUG_CPM @@ -306,7 +300,7 @@ struct cpm_ioport32e { __be32 dir, par, sor, odr, dat; }; -static void cpm1_set_pin32(int port, int pin, int flags) +static void __init cpm1_set_pin32(int port, int pin, int flags) { struct cpm_ioport32e __iomem *iop; pin = 1 << (31 - pin); @@ -348,7 +342,7 @@ static void cpm1_set_pin32(int port, int pin, int flags) } } -static void cpm1_set_pin16(int port, int pin, int flags) +static void __init cpm1_set_pin16(int port, int pin, int flags) { struct cpm_ioport16 __iomem *iop = (struct cpm_ioport16 __iomem *)&mpc8xx_immr->im_ioport; @@ -386,7 +380,7 @@ static void cpm1_set_pin16(int port, int pin, int flags) } } -void cpm1_set_pin(enum cpm_port port, int pin, int flags) +void __init cpm1_set_pin(enum cpm_port port, int pin, int flags) { if (port == CPM_PORTB || port == CPM_PORTE) cpm1_set_pin32(port, pin, flags); @@ -394,7 +388,7 @@ void cpm1_set_pin(enum cpm_port port, int pin, int flags) cpm1_set_pin16(port, pin, flags); } -int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode) +int __init cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode) { int shift; int i, bits = 0; diff --git a/arch/powerpc/platforms/8xx/pic.c b/arch/powerpc/platforms/8xx/pic.c index e9617d35fd1f..f2ba837249d6 100644 --- a/arch/powerpc/platforms/8xx/pic.c +++ b/arch/powerpc/platforms/8xx/pic.c @@ -125,7 +125,7 @@ static const struct irq_domain_ops mpc8xx_pic_host_ops = { .xlate = mpc8xx_pic_host_xlate, }; -int mpc8xx_pic_init(void) +int __init mpc8xx_pic_init(void) { struct resource res; struct device_node *np; diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index d82e3664ffdf..e28df298df56 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -303,16 +303,6 @@ config GEN_RTC replacing their get_rtc_time/set_rtc_time callbacks with a proper RTC device driver. -config SIMPLE_GPIO - bool "Support for simple, memory-mapped GPIO controllers" - depends on PPC - select GPIOLIB - help - Say Y here to support simple, memory-mapped GPIO controllers. - These are usually BCSRs used to control board's switches, LEDs, - chip-selects, Ethernet/USB PHY's power and various other small - on-board peripherals. - config MCU_MPC8349EMITX bool "MPC8349E-mITX MCU driver" depends on I2C=y && PPC_83xx diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index 12543e53fa96..8d7f9c3dc771 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -415,13 +415,13 @@ config PPC_MM_SLICES bool config PPC_HAVE_PMU_SUPPORT - bool + bool config PPC_PERF_CTRS - def_bool y - depends on PERF_EVENTS && PPC_HAVE_PMU_SUPPORT - help - This enables the powerpc-specific perf_event back-end. + def_bool y + depends on PERF_EVENTS && PPC_HAVE_PMU_SUPPORT + help + This enables the powerpc-specific perf_event back-end. config FORCE_SMP # Allow platforms to force SMP=y by selecting this @@ -459,7 +459,6 @@ config NOT_COHERENT_CACHE bool depends on 4xx || PPC_8xx || E200 || PPC_MPC512x || \ GAMECUBE_COMMON || AMIGAONE - select ARCH_HAS_DMA_COHERENT_TO_PFN select ARCH_HAS_DMA_PREP_COHERENT select ARCH_HAS_SYNC_DMA_FOR_DEVICE select ARCH_HAS_SYNC_DMA_FOR_CPU diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c index 2dd452a047cd..9b1586b85152 100644 --- a/arch/powerpc/platforms/cell/spufs/inode.c +++ b/arch/powerpc/platforms/cell/spufs/inode.c @@ -198,14 +198,12 @@ static int spufs_fill_dir(struct dentry *dir, static int spufs_dir_close(struct inode *inode, struct file *file) { - struct spu_context *ctx; struct inode *parent; struct dentry *dir; int ret; dir = file->f_path.dentry; parent = d_inode(dir->d_parent); - ctx = SPUFS_I(d_inode(dir))->i_ctx; inode_lock_nested(parent, I_MUTEX_PARENT); ret = spufs_rmdir(parent, dir); diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile index a3ac9646119d..c0f8120045c3 100644 --- a/arch/powerpc/platforms/powernv/Makefile +++ b/arch/powerpc/platforms/powernv/Makefile @@ -20,3 +20,4 @@ obj-$(CONFIG_PPC_MEMTRACE) += memtrace.o obj-$(CONFIG_PPC_VAS) += vas.o vas-window.o vas-debug.o obj-$(CONFIG_OCXL_BASE) += ocxl.o obj-$(CONFIG_SCOM_DEBUGFS) += opal-xscom.o +obj-$(CONFIG_PPC_SECURE_BOOT) += opal-secvar.o diff --git a/arch/powerpc/platforms/powernv/opal-call.c b/arch/powerpc/platforms/powernv/opal-call.c index a2aa5e433ac8..5cd0f52d258f 100644 --- a/arch/powerpc/platforms/powernv/opal-call.c +++ b/arch/powerpc/platforms/powernv/opal-call.c @@ -290,3 +290,6 @@ OPAL_CALL(opal_nx_coproc_init, OPAL_NX_COPROC_INIT); OPAL_CALL(opal_mpipl_update, OPAL_MPIPL_UPDATE); OPAL_CALL(opal_mpipl_register_tag, OPAL_MPIPL_REGISTER_TAG); OPAL_CALL(opal_mpipl_query_tag, OPAL_MPIPL_QUERY_TAG); +OPAL_CALL(opal_secvar_get, OPAL_SECVAR_GET); +OPAL_CALL(opal_secvar_get_next, OPAL_SECVAR_GET_NEXT); +OPAL_CALL(opal_secvar_enqueue_update, OPAL_SECVAR_ENQUEUE_UPDATE); diff --git a/arch/powerpc/platforms/powernv/opal-imc.c b/arch/powerpc/platforms/powernv/opal-imc.c index e04b20625cb9..000b350d4060 100644 --- a/arch/powerpc/platforms/powernv/opal-imc.c +++ b/arch/powerpc/platforms/powernv/opal-imc.c @@ -59,10 +59,6 @@ static void export_imc_mode_and_cmd(struct device_node *node, imc_debugfs_parent = debugfs_create_dir("imc", powerpc_debugfs_root); - /* - * Return here, either because 'imc' directory already exists, - * Or failed to create a new one. - */ if (!imc_debugfs_parent) return; @@ -135,7 +131,6 @@ static int imc_get_mem_addr_nest(struct device_node *node, } pmu_ptr->imc_counter_mmaped = true; - export_imc_mode_and_cmd(node, pmu_ptr); kfree(base_addr_arr); kfree(chipid_arr); return 0; @@ -151,7 +146,7 @@ error: * and domain as the inputs. * Allocates memory for the struct imc_pmu, sets up its domain, size and offsets */ -static int imc_pmu_create(struct device_node *parent, int pmu_index, int domain) +static struct imc_pmu *imc_pmu_create(struct device_node *parent, int pmu_index, int domain) { int ret = 0; struct imc_pmu *pmu_ptr; @@ -159,27 +154,23 @@ static int imc_pmu_create(struct device_node *parent, int pmu_index, int domain) /* Return for unknown domain */ if (domain < 0) - return -EINVAL; + return NULL; /* memory for pmu */ pmu_ptr = kzalloc(sizeof(*pmu_ptr), GFP_KERNEL); if (!pmu_ptr) - return -ENOMEM; + return NULL; /* Set the domain */ pmu_ptr->domain = domain; ret = of_property_read_u32(parent, "size", &pmu_ptr->counter_mem_size); - if (ret) { - ret = -EINVAL; + if (ret) goto free_pmu; - } if (!of_property_read_u32(parent, "offset", &offset)) { - if (imc_get_mem_addr_nest(parent, pmu_ptr, offset)) { - ret = -EINVAL; + if (imc_get_mem_addr_nest(parent, pmu_ptr, offset)) goto free_pmu; - } } /* Function to register IMC pmu */ @@ -190,14 +181,14 @@ static int imc_pmu_create(struct device_node *parent, int pmu_index, int domain) if (pmu_ptr->domain == IMC_DOMAIN_NEST) kfree(pmu_ptr->mem_info); kfree(pmu_ptr); - return ret; + return NULL; } - return 0; + return pmu_ptr; free_pmu: kfree(pmu_ptr); - return ret; + return NULL; } static void disable_nest_pmu_counters(void) @@ -254,6 +245,7 @@ int get_max_nest_dev(void) static int opal_imc_counters_probe(struct platform_device *pdev) { struct device_node *imc_dev = pdev->dev.of_node; + struct imc_pmu *pmu; int pmu_count = 0, domain; bool core_imc_reg = false, thread_imc_reg = false; u32 type; @@ -269,6 +261,7 @@ static int opal_imc_counters_probe(struct platform_device *pdev) } for_each_compatible_node(imc_dev, NULL, IMC_DTB_UNIT_COMPAT) { + pmu = NULL; if (of_property_read_u32(imc_dev, "type", &type)) { pr_warn("IMC Device without type property\n"); continue; @@ -285,7 +278,14 @@ static int opal_imc_counters_probe(struct platform_device *pdev) domain = IMC_DOMAIN_THREAD; break; case IMC_TYPE_TRACE: - domain = IMC_DOMAIN_TRACE; + /* + * FIXME. Using trace_imc events to monitor application + * or KVM thread performance can cause a checkstop + * (system crash). + * Disable it for now. + */ + pr_info_once("IMC: disabling trace_imc PMU\n"); + domain = -1; break; default: pr_warn("IMC Unknown Device type \n"); @@ -293,9 +293,13 @@ static int opal_imc_counters_probe(struct platform_device *pdev) break; } - if (!imc_pmu_create(imc_dev, pmu_count, domain)) { - if (domain == IMC_DOMAIN_NEST) + pmu = imc_pmu_create(imc_dev, pmu_count, domain); + if (pmu != NULL) { + if (domain == IMC_DOMAIN_NEST) { + if (!imc_debugfs_parent) + export_imc_mode_and_cmd(imc_dev, pmu); pmu_count++; + } if (domain == IMC_DOMAIN_CORE) core_imc_reg = true; if (domain == IMC_DOMAIN_THREAD) @@ -303,10 +307,6 @@ static int opal_imc_counters_probe(struct platform_device *pdev) } } - /* If none of the nest units are registered, remove debugfs interface */ - if (pmu_count == 0) - debugfs_remove_recursive(imc_debugfs_parent); - /* If core imc is not registered, unregister thread-imc */ if (!core_imc_reg && thread_imc_reg) unregister_thread_imc(); diff --git a/arch/powerpc/platforms/powernv/opal-powercap.c b/arch/powerpc/platforms/powernv/opal-powercap.c index dc599e787f78..c16d44f6f1d1 100644 --- a/arch/powerpc/platforms/powernv/opal-powercap.c +++ b/arch/powerpc/platforms/powernv/opal-powercap.c @@ -13,7 +13,7 @@ #include <asm/opal.h> -DEFINE_MUTEX(powercap_mutex); +static DEFINE_MUTEX(powercap_mutex); static struct kobject *powercap_kobj; diff --git a/arch/powerpc/platforms/powernv/opal-psr.c b/arch/powerpc/platforms/powernv/opal-psr.c index b6ccb3026c6c..69d7e75950d1 100644 --- a/arch/powerpc/platforms/powernv/opal-psr.c +++ b/arch/powerpc/platforms/powernv/opal-psr.c @@ -13,11 +13,11 @@ #include <asm/opal.h> -DEFINE_MUTEX(psr_mutex); +static DEFINE_MUTEX(psr_mutex); static struct kobject *psr_kobj; -struct psr_attr { +static struct psr_attr { u32 handle; struct kobj_attribute attr; } *psr_attrs; diff --git a/arch/powerpc/platforms/powernv/opal-secvar.c b/arch/powerpc/platforms/powernv/opal-secvar.c new file mode 100644 index 000000000000..14133e120bdd --- /dev/null +++ b/arch/powerpc/platforms/powernv/opal-secvar.c @@ -0,0 +1,140 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * PowerNV code for secure variables + * + * Copyright (C) 2019 IBM Corporation + * Author: Claudio Carvalho + * Nayna Jain + * + * APIs to access secure variables managed by OPAL. + */ + +#define pr_fmt(fmt) "secvar: "fmt + +#include <linux/types.h> +#include <linux/platform_device.h> +#include <linux/of_platform.h> +#include <asm/opal.h> +#include <asm/secvar.h> +#include <asm/secure_boot.h> + +static int opal_status_to_err(int rc) +{ + int err; + + switch (rc) { + case OPAL_SUCCESS: + err = 0; + break; + case OPAL_UNSUPPORTED: + err = -ENXIO; + break; + case OPAL_PARAMETER: + err = -EINVAL; + break; + case OPAL_RESOURCE: + err = -ENOSPC; + break; + case OPAL_HARDWARE: + err = -EIO; + break; + case OPAL_NO_MEM: + err = -ENOMEM; + break; + case OPAL_EMPTY: + err = -ENOENT; + break; + case OPAL_PARTIAL: + err = -EFBIG; + break; + default: + err = -EINVAL; + } + + return err; +} + +static int opal_get_variable(const char *key, uint64_t ksize, + u8 *data, uint64_t *dsize) +{ + int rc; + + if (!key || !dsize) + return -EINVAL; + + *dsize = cpu_to_be64(*dsize); + + rc = opal_secvar_get(key, ksize, data, dsize); + + *dsize = be64_to_cpu(*dsize); + + return opal_status_to_err(rc); +} + +static int opal_get_next_variable(const char *key, uint64_t *keylen, + uint64_t keybufsize) +{ + int rc; + + if (!key || !keylen) + return -EINVAL; + + *keylen = cpu_to_be64(*keylen); + + rc = opal_secvar_get_next(key, keylen, keybufsize); + + *keylen = be64_to_cpu(*keylen); + + return opal_status_to_err(rc); +} + +static int opal_set_variable(const char *key, uint64_t ksize, u8 *data, + uint64_t dsize) +{ + int rc; + + if (!key || !data) + return -EINVAL; + + rc = opal_secvar_enqueue_update(key, ksize, data, dsize); + + return opal_status_to_err(rc); +} + +static const struct secvar_operations opal_secvar_ops = { + .get = opal_get_variable, + .get_next = opal_get_next_variable, + .set = opal_set_variable, +}; + +static int opal_secvar_probe(struct platform_device *pdev) +{ + if (!opal_check_token(OPAL_SECVAR_GET) + || !opal_check_token(OPAL_SECVAR_GET_NEXT) + || !opal_check_token(OPAL_SECVAR_ENQUEUE_UPDATE)) { + pr_err("OPAL doesn't support secure variables\n"); + return -ENODEV; + } + + set_secvar_ops(&opal_secvar_ops); + + return 0; +} + +static const struct of_device_id opal_secvar_match[] = { + { .compatible = "ibm,secvar-backend",}, + {}, +}; + +static struct platform_driver opal_secvar_driver = { + .driver = { + .name = "secvar", + .of_match_table = opal_secvar_match, + }, +}; + +static int __init opal_secvar_init(void) +{ + return platform_driver_probe(&opal_secvar_driver, opal_secvar_probe); +} +device_initcall(opal_secvar_init); diff --git a/arch/powerpc/platforms/powernv/opal-sensor-groups.c b/arch/powerpc/platforms/powernv/opal-sensor-groups.c index 31f13c13275f..f8ae1fb0c102 100644 --- a/arch/powerpc/platforms/powernv/opal-sensor-groups.c +++ b/arch/powerpc/platforms/powernv/opal-sensor-groups.c @@ -13,7 +13,7 @@ #include <asm/opal.h> -DEFINE_MUTEX(sg_mutex); +static DEFINE_MUTEX(sg_mutex); static struct kobject *sg_kobj; diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c index 38e90270280b..a6ee08009f0f 100644 --- a/arch/powerpc/platforms/powernv/opal.c +++ b/arch/powerpc/platforms/powernv/opal.c @@ -35,6 +35,16 @@ #include "powernv.h" +#define OPAL_MSG_QUEUE_MAX 16 + +struct opal_msg_node { + struct list_head list; + struct opal_msg msg; +}; + +static DEFINE_SPINLOCK(msg_list_lock); +static LIST_HEAD(msg_list); + /* /sys/firmware/opal */ struct kobject *opal_kobj; @@ -50,6 +60,8 @@ struct mcheck_recoverable_range { u64 recover_addr; }; +static int msg_list_size; + static struct mcheck_recoverable_range *mc_recoverable_range; static int mc_recoverable_range_len; @@ -237,6 +249,43 @@ static int __init opal_register_exception_handlers(void) } machine_early_initcall(powernv, opal_register_exception_handlers); +static void queue_replay_msg(void *msg) +{ + struct opal_msg_node *msg_node; + + if (msg_list_size < OPAL_MSG_QUEUE_MAX) { + msg_node = kzalloc(sizeof(*msg_node), GFP_ATOMIC); + if (msg_node) { + INIT_LIST_HEAD(&msg_node->list); + memcpy(&msg_node->msg, msg, sizeof(struct opal_msg)); + list_add_tail(&msg_node->list, &msg_list); + msg_list_size++; + } else + pr_warn_once("message queue no memory\n"); + + if (msg_list_size >= OPAL_MSG_QUEUE_MAX) + pr_warn_once("message queue full\n"); + } +} + +static void dequeue_replay_msg(enum opal_msg_type msg_type) +{ + struct opal_msg_node *msg_node, *tmp; + + list_for_each_entry_safe(msg_node, tmp, &msg_list, list) { + if (be32_to_cpu(msg_node->msg.msg_type) != msg_type) + continue; + + atomic_notifier_call_chain(&opal_msg_notifier_head[msg_type], + msg_type, + &msg_node->msg); + + list_del(&msg_node->list); + kfree(msg_node); + msg_list_size--; + } +} + /* * Opal message notifier based on message type. Allow subscribers to get * notified for specific messgae type. @@ -244,14 +293,30 @@ machine_early_initcall(powernv, opal_register_exception_handlers); int opal_message_notifier_register(enum opal_msg_type msg_type, struct notifier_block *nb) { + int ret; + unsigned long flags; + if (!nb || msg_type >= OPAL_MSG_TYPE_MAX) { pr_warn("%s: Invalid arguments, msg_type:%d\n", __func__, msg_type); return -EINVAL; } - return atomic_notifier_chain_register( - &opal_msg_notifier_head[msg_type], nb); + spin_lock_irqsave(&msg_list_lock, flags); + ret = atomic_notifier_chain_register( + &opal_msg_notifier_head[msg_type], nb); + + /* + * If the registration succeeded, replay any queued messages that came + * in prior to the notifier chain registration. msg_list_lock held here + * to ensure they're delivered prior to any subsequent messages. + */ + if (ret == 0) + dequeue_replay_msg(msg_type); + + spin_unlock_irqrestore(&msg_list_lock, flags); + + return ret; } EXPORT_SYMBOL_GPL(opal_message_notifier_register); @@ -265,6 +330,23 @@ EXPORT_SYMBOL_GPL(opal_message_notifier_unregister); static void opal_message_do_notify(uint32_t msg_type, void *msg) { + unsigned long flags; + bool queued = false; + + spin_lock_irqsave(&msg_list_lock, flags); + if (opal_msg_notifier_head[msg_type].head == NULL) { + /* + * Queue up the msg since no notifiers have registered + * yet for this msg_type. + */ + queue_replay_msg(msg); + queued = true; + } + spin_unlock_irqrestore(&msg_list_lock, flags); + + if (queued) + return; + /* notify subscribers */ atomic_notifier_call_chain(&opal_msg_notifier_head[msg_type], msg_type, msg); @@ -1002,6 +1084,9 @@ static int __init opal_init(void) /* Initialise OPAL Power control interface */ opal_power_control_init(); + /* Initialize OPAL secure variables */ + opal_pdev_init("ibm,secvar-backend"); + return 0; } machine_subsys_initcall(powernv, opal_init); diff --git a/arch/powerpc/platforms/powernv/pci-ioda-tce.c b/arch/powerpc/platforms/powernv/pci-ioda-tce.c index a0b9c0c23ed2..5dc6847d5f4c 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda-tce.c +++ b/arch/powerpc/platforms/powernv/pci-ioda-tce.c @@ -340,14 +340,6 @@ free_tces_exit: return -ENOMEM; } -static void pnv_iommu_table_group_link_free(struct rcu_head *head) -{ - struct iommu_table_group_link *tgl = container_of(head, - struct iommu_table_group_link, rcu); - - kfree(tgl); -} - void pnv_pci_unlink_table_and_group(struct iommu_table *tbl, struct iommu_table_group *table_group) { @@ -363,7 +355,7 @@ void pnv_pci_unlink_table_and_group(struct iommu_table *tbl, list_for_each_entry_rcu(tgl, &tbl->it_group_list, next) { if (tgl->table_group == table_group) { list_del_rcu(&tgl->next); - call_rcu(&tgl->rcu, pnv_iommu_table_group_link_free); + kfree_rcu(tgl, rcu); found = true; break; } diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index c28d0d9b7ee0..da1068a9c263 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -3086,8 +3086,8 @@ static int pnv_pci_diag_data_set(void *data, u64 val) return 0; } -DEFINE_SIMPLE_ATTRIBUTE(pnv_pci_diag_data_fops, NULL, - pnv_pci_diag_data_set, "%llu\n"); +DEFINE_DEBUGFS_ATTRIBUTE(pnv_pci_diag_data_fops, NULL, pnv_pci_diag_data_set, + "%llu\n"); #endif /* CONFIG_DEBUG_FS */ @@ -3112,8 +3112,8 @@ static void pnv_pci_ioda_create_dbgfs(void) continue; } - debugfs_create_file("dump_diag_regs", 0200, phb->dbgfs, hose, - &pnv_pci_diag_data_fops); + debugfs_create_file_unsafe("dump_diag_regs", 0200, phb->dbgfs, + hose, &pnv_pci_diag_data_fops); } #endif /* CONFIG_DEBUG_FS */ } diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c index 2825d004dece..c0bea75ac27b 100644 --- a/arch/powerpc/platforms/powernv/pci.c +++ b/arch/powerpc/platforms/powernv/pci.c @@ -945,6 +945,23 @@ void __init pnv_pci_init(void) if (!firmware_has_feature(FW_FEATURE_OPAL)) return; +#ifdef CONFIG_PCIEPORTBUS + /* + * On PowerNV PCIe devices are (currently) managed in cooperation + * with firmware. This isn't *strictly* required, but there's enough + * assumptions baked into both firmware and the platform code that + * it's unwise to allow the portbus services to be used. + * + * We need to fix this eventually, but for now set this flag to disable + * the portbus driver. The AER service isn't required since that AER + * events are handled via EEH. The pciehp hotplug driver can't work + * without kernel changes (and portbus binding breaks pnv_php). The + * other services also require some thinking about how we're going + * to integrate them. + */ + pcie_ports_disabled = true; +#endif + /* Look for IODA IO-Hubs. */ for_each_compatible_node(np, NULL, "ibm,ioda-hub") { pnv_pci_init_ioda_hub(np); diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index 9e35cddddf73..595e9f8a6539 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -108,6 +108,7 @@ config PPC_SMLPAR config CMM tristate "Collaborative memory management" depends on PPC_SMLPAR + select MEMORY_BALLOON default y help Select this option, if you want to enable the kernel interface diff --git a/arch/powerpc/platforms/pseries/cmm.c b/arch/powerpc/platforms/pseries/cmm.c index b33251d75927..91571841df8a 100644 --- a/arch/powerpc/platforms/pseries/cmm.c +++ b/arch/powerpc/platforms/pseries/cmm.c @@ -19,6 +19,10 @@ #include <linux/stringify.h> #include <linux/swap.h> #include <linux/device.h> +#include <linux/mount.h> +#include <linux/pseudo_fs.h> +#include <linux/magic.h> +#include <linux/balloon_compaction.h> #include <asm/firmware.h> #include <asm/hvcall.h> #include <asm/mmu.h> @@ -38,12 +42,8 @@ #define CMM_MIN_MEM_MB 256 #define KB2PAGES(_p) ((_p)>>(PAGE_SHIFT-10)) #define PAGES2KB(_p) ((_p)<<(PAGE_SHIFT-10)) -/* - * The priority level tries to ensure that this notifier is called as - * late as possible to reduce thrashing in the shared memory pool. - */ + #define CMM_MEM_HOTPLUG_PRI 1 -#define CMM_MEM_ISOLATE_PRI 15 static unsigned int delay = CMM_DEFAULT_DELAY; static unsigned int hotplug_delay = CMM_HOTPLUG_DELAY; @@ -51,6 +51,8 @@ static unsigned int oom_kb = CMM_OOM_KB; static unsigned int cmm_debug = CMM_DEBUG; static unsigned int cmm_disabled = CMM_DISABLE; static unsigned long min_mem_mb = CMM_MIN_MEM_MB; +static bool __read_mostly simulate; +static unsigned long simulate_loan_target_kb; static struct device cmm_dev; MODULE_AUTHOR("Brian King <brking@linux.vnet.ibm.com>"); @@ -74,35 +76,31 @@ MODULE_PARM_DESC(min_mem_mb, "Minimum amount of memory (in MB) to not balloon. " module_param_named(debug, cmm_debug, uint, 0644); MODULE_PARM_DESC(debug, "Enable module debugging logging. Set to 1 to enable. " "[Default=" __stringify(CMM_DEBUG) "]"); - -#define CMM_NR_PAGES ((PAGE_SIZE - sizeof(void *) - sizeof(unsigned long)) / sizeof(unsigned long)) +module_param_named(simulate, simulate, bool, 0444); +MODULE_PARM_DESC(simulate, "Enable simulation mode (no communication with hw)."); #define cmm_dbg(...) if (cmm_debug) { printk(KERN_INFO "cmm: "__VA_ARGS__); } -struct cmm_page_array { - struct cmm_page_array *next; - unsigned long index; - unsigned long page[CMM_NR_PAGES]; -}; - -static unsigned long loaned_pages; +static atomic_long_t loaned_pages; static unsigned long loaned_pages_target; static unsigned long oom_freed_pages; -static struct cmm_page_array *cmm_page_list; -static DEFINE_SPINLOCK(cmm_lock); - static DEFINE_MUTEX(hotplug_mutex); static int hotplug_occurred; /* protected by the hotplug mutex */ static struct task_struct *cmm_thread_ptr; +static struct balloon_dev_info b_dev_info; -static long plpar_page_set_loaned(unsigned long vpa) +static long plpar_page_set_loaned(struct page *page) { + const unsigned long vpa = page_to_phys(page); unsigned long cmo_page_sz = cmo_get_page_size(); long rc = 0; int i; + if (unlikely(simulate)) + return 0; + for (i = 0; !rc && i < PAGE_SIZE; i += cmo_page_sz) rc = plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_LOANED, vpa + i, 0); @@ -113,12 +111,16 @@ static long plpar_page_set_loaned(unsigned long vpa) return rc; } -static long plpar_page_set_active(unsigned long vpa) +static long plpar_page_set_active(struct page *page) { + const unsigned long vpa = page_to_phys(page); unsigned long cmo_page_sz = cmo_get_page_size(); long rc = 0; int i; + if (unlikely(simulate)) + return 0; + for (i = 0; !rc && i < PAGE_SIZE; i += cmo_page_sz) rc = plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_ACTIVE, vpa + i, 0); @@ -138,8 +140,7 @@ static long plpar_page_set_active(unsigned long vpa) **/ static long cmm_alloc_pages(long nr) { - struct cmm_page_array *pa, *npa; - unsigned long addr; + struct page *page; long rc; cmm_dbg("Begin request for %ld pages\n", nr); @@ -156,46 +157,19 @@ static long cmm_alloc_pages(long nr) break; } - addr = __get_free_page(GFP_NOIO | __GFP_NOWARN | - __GFP_NORETRY | __GFP_NOMEMALLOC); - if (!addr) + page = balloon_page_alloc(); + if (!page) break; - spin_lock(&cmm_lock); - pa = cmm_page_list; - if (!pa || pa->index >= CMM_NR_PAGES) { - /* Need a new page for the page list. */ - spin_unlock(&cmm_lock); - npa = (struct cmm_page_array *)__get_free_page( - GFP_NOIO | __GFP_NOWARN | - __GFP_NORETRY | __GFP_NOMEMALLOC); - if (!npa) { - pr_info("%s: Can not allocate new page list\n", __func__); - free_page(addr); - break; - } - spin_lock(&cmm_lock); - pa = cmm_page_list; - - if (!pa || pa->index >= CMM_NR_PAGES) { - npa->next = pa; - npa->index = 0; - pa = npa; - cmm_page_list = pa; - } else - free_page((unsigned long) npa); - } - - if ((rc = plpar_page_set_loaned(__pa(addr)))) { + rc = plpar_page_set_loaned(page); + if (rc) { pr_err("%s: Can not set page to loaned. rc=%ld\n", __func__, rc); - spin_unlock(&cmm_lock); - free_page(addr); + __free_page(page); break; } - pa->page[pa->index++] = addr; - loaned_pages++; - totalram_pages_dec(); - spin_unlock(&cmm_lock); + balloon_page_enqueue(&b_dev_info, page); + atomic_long_inc(&loaned_pages); + adjust_managed_page_count(page, -1); nr--; } @@ -212,30 +186,19 @@ static long cmm_alloc_pages(long nr) **/ static long cmm_free_pages(long nr) { - struct cmm_page_array *pa; - unsigned long addr; + struct page *page; cmm_dbg("Begin free of %ld pages.\n", nr); - spin_lock(&cmm_lock); - pa = cmm_page_list; while (nr) { - if (!pa || pa->index <= 0) + page = balloon_page_dequeue(&b_dev_info); + if (!page) break; - addr = pa->page[--pa->index]; - - if (pa->index == 0) { - pa = pa->next; - free_page((unsigned long) cmm_page_list); - cmm_page_list = pa; - } - - plpar_page_set_active(__pa(addr)); - free_page(addr); - loaned_pages--; + plpar_page_set_active(page); + adjust_managed_page_count(page, 1); + __free_page(page); + atomic_long_dec(&loaned_pages); nr--; - totalram_pages_inc(); } - spin_unlock(&cmm_lock); cmm_dbg("End request with %ld pages unfulfilled\n", nr); return nr; } @@ -257,7 +220,7 @@ static int cmm_oom_notify(struct notifier_block *self, cmm_dbg("OOM processing started\n"); nr = cmm_free_pages(nr); - loaned_pages_target = loaned_pages; + loaned_pages_target = atomic_long_read(&loaned_pages); *freed += KB2PAGES(oom_kb) - nr; oom_freed_pages += KB2PAGES(oom_kb) - nr; cmm_dbg("OOM processing complete\n"); @@ -274,19 +237,24 @@ static int cmm_oom_notify(struct notifier_block *self, **/ static void cmm_get_mpp(void) { + const long __loaned_pages = atomic_long_read(&loaned_pages); + const long total_pages = totalram_pages() + __loaned_pages; int rc; struct hvcall_mpp_data mpp_data; signed long active_pages_target, page_loan_request, target; - signed long total_pages = totalram_pages() + loaned_pages; signed long min_mem_pages = (min_mem_mb * 1024 * 1024) / PAGE_SIZE; - rc = h_get_mpp(&mpp_data); - - if (rc != H_SUCCESS) - return; - - page_loan_request = div_s64((s64)mpp_data.loan_request, PAGE_SIZE); - target = page_loan_request + (signed long)loaned_pages; + if (likely(!simulate)) { + rc = h_get_mpp(&mpp_data); + if (rc != H_SUCCESS) + return; + page_loan_request = div_s64((s64)mpp_data.loan_request, + PAGE_SIZE); + target = page_loan_request + __loaned_pages; + } else { + target = KB2PAGES(simulate_loan_target_kb); + page_loan_request = target - __loaned_pages; + } if (target < 0 || total_pages < min_mem_pages) target = 0; @@ -307,7 +275,7 @@ static void cmm_get_mpp(void) loaned_pages_target = target; cmm_dbg("delta = %ld, loaned = %lu, target = %lu, oom = %lu, totalram = %lu\n", - page_loan_request, loaned_pages, loaned_pages_target, + page_loan_request, __loaned_pages, loaned_pages_target, oom_freed_pages, totalram_pages()); } @@ -325,6 +293,7 @@ static struct notifier_block cmm_oom_nb = { static int cmm_thread(void *dummy) { unsigned long timeleft; + long __loaned_pages; while (1) { timeleft = msleep_interruptible(delay * 1000); @@ -355,11 +324,12 @@ static int cmm_thread(void *dummy) cmm_get_mpp(); - if (loaned_pages_target > loaned_pages) { - if (cmm_alloc_pages(loaned_pages_target - loaned_pages)) - loaned_pages_target = loaned_pages; - } else if (loaned_pages_target < loaned_pages) - cmm_free_pages(loaned_pages - loaned_pages_target); + __loaned_pages = atomic_long_read(&loaned_pages); + if (loaned_pages_target > __loaned_pages) { + if (cmm_alloc_pages(loaned_pages_target - __loaned_pages)) + loaned_pages_target = __loaned_pages; + } else if (loaned_pages_target < __loaned_pages) + cmm_free_pages(__loaned_pages - loaned_pages_target); } return 0; } @@ -373,7 +343,7 @@ static int cmm_thread(void *dummy) } \ static DEVICE_ATTR(name, 0444, show_##name, NULL) -CMM_SHOW(loaned_kb, "%lu\n", PAGES2KB(loaned_pages)); +CMM_SHOW(loaned_kb, "%lu\n", PAGES2KB(atomic_long_read(&loaned_pages))); CMM_SHOW(loaned_target_kb, "%lu\n", PAGES2KB(loaned_pages_target)); static ssize_t show_oom_pages(struct device *dev, @@ -406,11 +376,18 @@ static struct device_attribute *cmm_attrs[] = { &dev_attr_oom_freed_kb, }; +static DEVICE_ULONG_ATTR(simulate_loan_target_kb, 0644, + simulate_loan_target_kb); + static struct bus_type cmm_subsys = { .name = "cmm", .dev_name = "cmm", }; +static void cmm_release_device(struct device *dev) +{ +} + /** * cmm_sysfs_register - Register with sysfs * @@ -426,6 +403,7 @@ static int cmm_sysfs_register(struct device *dev) dev->id = 0; dev->bus = &cmm_subsys; + dev->release = cmm_release_device; if ((rc = device_register(dev))) goto subsys_unregister; @@ -435,6 +413,11 @@ static int cmm_sysfs_register(struct device *dev) goto fail; } + if (!simulate) + return 0; + rc = device_create_file(dev, &dev_attr_simulate_loan_target_kb.attr); + if (rc) + goto fail; return 0; fail: @@ -471,7 +454,7 @@ static int cmm_reboot_notifier(struct notifier_block *nb, if (cmm_thread_ptr) kthread_stop(cmm_thread_ptr); cmm_thread_ptr = NULL; - cmm_free_pages(loaned_pages); + cmm_free_pages(atomic_long_read(&loaned_pages)); } return NOTIFY_DONE; } @@ -481,142 +464,6 @@ static struct notifier_block cmm_reboot_nb = { }; /** - * cmm_count_pages - Count the number of pages loaned in a particular range. - * - * @arg: memory_isolate_notify structure with address range and count - * - * Return value: - * 0 on success - **/ -static unsigned long cmm_count_pages(void *arg) -{ - struct memory_isolate_notify *marg = arg; - struct cmm_page_array *pa; - unsigned long start = (unsigned long)pfn_to_kaddr(marg->start_pfn); - unsigned long end = start + (marg->nr_pages << PAGE_SHIFT); - unsigned long idx; - - spin_lock(&cmm_lock); - pa = cmm_page_list; - while (pa) { - if ((unsigned long)pa >= start && (unsigned long)pa < end) - marg->pages_found++; - for (idx = 0; idx < pa->index; idx++) - if (pa->page[idx] >= start && pa->page[idx] < end) - marg->pages_found++; - pa = pa->next; - } - spin_unlock(&cmm_lock); - return 0; -} - -/** - * cmm_memory_isolate_cb - Handle memory isolation notifier calls - * @self: notifier block struct - * @action: action to take - * @arg: struct memory_isolate_notify data for handler - * - * Return value: - * NOTIFY_OK or notifier error based on subfunction return value - **/ -static int cmm_memory_isolate_cb(struct notifier_block *self, - unsigned long action, void *arg) -{ - int ret = 0; - - if (action == MEM_ISOLATE_COUNT) - ret = cmm_count_pages(arg); - - return notifier_from_errno(ret); -} - -static struct notifier_block cmm_mem_isolate_nb = { - .notifier_call = cmm_memory_isolate_cb, - .priority = CMM_MEM_ISOLATE_PRI -}; - -/** - * cmm_mem_going_offline - Unloan pages where memory is to be removed - * @arg: memory_notify structure with page range to be offlined - * - * Return value: - * 0 on success - **/ -static int cmm_mem_going_offline(void *arg) -{ - struct memory_notify *marg = arg; - unsigned long start_page = (unsigned long)pfn_to_kaddr(marg->start_pfn); - unsigned long end_page = start_page + (marg->nr_pages << PAGE_SHIFT); - struct cmm_page_array *pa_curr, *pa_last, *npa; - unsigned long idx; - unsigned long freed = 0; - - cmm_dbg("Memory going offline, searching 0x%lx (%ld pages).\n", - start_page, marg->nr_pages); - spin_lock(&cmm_lock); - - /* Search the page list for pages in the range to be offlined */ - pa_last = pa_curr = cmm_page_list; - while (pa_curr) { - for (idx = (pa_curr->index - 1); (idx + 1) > 0; idx--) { - if ((pa_curr->page[idx] < start_page) || - (pa_curr->page[idx] >= end_page)) - continue; - - plpar_page_set_active(__pa(pa_curr->page[idx])); - free_page(pa_curr->page[idx]); - freed++; - loaned_pages--; - totalram_pages_inc(); - pa_curr->page[idx] = pa_last->page[--pa_last->index]; - if (pa_last->index == 0) { - if (pa_curr == pa_last) - pa_curr = pa_last->next; - pa_last = pa_last->next; - free_page((unsigned long)cmm_page_list); - cmm_page_list = pa_last; - } - } - pa_curr = pa_curr->next; - } - - /* Search for page list structures in the range to be offlined */ - pa_last = NULL; - pa_curr = cmm_page_list; - while (pa_curr) { - if (((unsigned long)pa_curr >= start_page) && - ((unsigned long)pa_curr < end_page)) { - npa = (struct cmm_page_array *)__get_free_page( - GFP_NOIO | __GFP_NOWARN | - __GFP_NORETRY | __GFP_NOMEMALLOC); - if (!npa) { - spin_unlock(&cmm_lock); - cmm_dbg("Failed to allocate memory for list " - "management. Memory hotplug " - "failed.\n"); - return -ENOMEM; - } - memcpy(npa, pa_curr, PAGE_SIZE); - if (pa_curr == cmm_page_list) - cmm_page_list = npa; - if (pa_last) - pa_last->next = npa; - free_page((unsigned long) pa_curr); - freed++; - pa_curr = npa; - } - - pa_last = pa_curr; - pa_curr = pa_curr->next; - } - - spin_unlock(&cmm_lock); - cmm_dbg("Released %ld pages in the search range.\n", freed); - - return 0; -} - -/** * cmm_memory_cb - Handle memory hotplug notifier calls * @self: notifier block struct * @action: action to take @@ -635,7 +482,6 @@ static int cmm_memory_cb(struct notifier_block *self, case MEM_GOING_OFFLINE: mutex_lock(&hotplug_mutex); hotplug_occurred = 1; - ret = cmm_mem_going_offline(arg); break; case MEM_OFFLINE: case MEM_CANCEL_OFFLINE: @@ -656,6 +502,106 @@ static struct notifier_block cmm_mem_nb = { .priority = CMM_MEM_HOTPLUG_PRI }; +#ifdef CONFIG_BALLOON_COMPACTION +static struct vfsmount *balloon_mnt; + +static int cmm_init_fs_context(struct fs_context *fc) +{ + return init_pseudo(fc, PPC_CMM_MAGIC) ? 0 : -ENOMEM; +} + +static struct file_system_type balloon_fs = { + .name = "ppc-cmm", + .init_fs_context = cmm_init_fs_context, + .kill_sb = kill_anon_super, +}; + +static int cmm_migratepage(struct balloon_dev_info *b_dev_info, + struct page *newpage, struct page *page, + enum migrate_mode mode) +{ + unsigned long flags; + + /* + * loan/"inflate" the newpage first. + * + * We might race against the cmm_thread who might discover after our + * loan request that another page is to be unloaned. However, once + * the cmm_thread runs again later, this error will automatically + * be corrected. + */ + if (plpar_page_set_loaned(newpage)) { + /* Unlikely, but possible. Tell the caller not to retry now. */ + pr_err_ratelimited("%s: Cannot set page to loaned.", __func__); + return -EBUSY; + } + + /* balloon page list reference */ + get_page(newpage); + + spin_lock_irqsave(&b_dev_info->pages_lock, flags); + balloon_page_insert(b_dev_info, newpage); + balloon_page_delete(page); + b_dev_info->isolated_pages--; + spin_unlock_irqrestore(&b_dev_info->pages_lock, flags); + + /* + * activate/"deflate" the old page. We ignore any errors just like the + * other callers. + */ + plpar_page_set_active(page); + + /* balloon page list reference */ + put_page(page); + + return MIGRATEPAGE_SUCCESS; +} + +static int cmm_balloon_compaction_init(void) +{ + int rc; + + balloon_devinfo_init(&b_dev_info); + b_dev_info.migratepage = cmm_migratepage; + + balloon_mnt = kern_mount(&balloon_fs); + if (IS_ERR(balloon_mnt)) { + rc = PTR_ERR(balloon_mnt); + balloon_mnt = NULL; + return rc; + } + + b_dev_info.inode = alloc_anon_inode(balloon_mnt->mnt_sb); + if (IS_ERR(b_dev_info.inode)) { + rc = PTR_ERR(b_dev_info.inode); + b_dev_info.inode = NULL; + kern_unmount(balloon_mnt); + balloon_mnt = NULL; + return rc; + } + + b_dev_info.inode->i_mapping->a_ops = &balloon_aops; + return 0; +} +static void cmm_balloon_compaction_deinit(void) +{ + if (b_dev_info.inode) + iput(b_dev_info.inode); + b_dev_info.inode = NULL; + kern_unmount(balloon_mnt); + balloon_mnt = NULL; +} +#else /* CONFIG_BALLOON_COMPACTION */ +static int cmm_balloon_compaction_init(void) +{ + return 0; +} + +static void cmm_balloon_compaction_deinit(void) +{ +} +#endif /* CONFIG_BALLOON_COMPACTION */ + /** * cmm_init - Module initialization * @@ -664,26 +610,31 @@ static struct notifier_block cmm_mem_nb = { **/ static int cmm_init(void) { - int rc = -ENOMEM; + int rc; - if (!firmware_has_feature(FW_FEATURE_CMO)) + if (!firmware_has_feature(FW_FEATURE_CMO) && !simulate) return -EOPNOTSUPP; - if ((rc = register_oom_notifier(&cmm_oom_nb)) < 0) + rc = cmm_balloon_compaction_init(); + if (rc) return rc; + rc = register_oom_notifier(&cmm_oom_nb); + if (rc < 0) + goto out_balloon_compaction; + if ((rc = register_reboot_notifier(&cmm_reboot_nb))) goto out_oom_notifier; if ((rc = cmm_sysfs_register(&cmm_dev))) goto out_reboot_notifier; - if (register_memory_notifier(&cmm_mem_nb) || - register_memory_isolate_notifier(&cmm_mem_isolate_nb)) + rc = register_memory_notifier(&cmm_mem_nb); + if (rc) goto out_unregister_notifier; if (cmm_disabled) - return rc; + return 0; cmm_thread_ptr = kthread_run(cmm_thread, NULL, "cmmthread"); if (IS_ERR(cmm_thread_ptr)) { @@ -691,16 +642,16 @@ static int cmm_init(void) goto out_unregister_notifier; } - return rc; - + return 0; out_unregister_notifier: unregister_memory_notifier(&cmm_mem_nb); - unregister_memory_isolate_notifier(&cmm_mem_isolate_nb); cmm_unregister_sysfs(&cmm_dev); out_reboot_notifier: unregister_reboot_notifier(&cmm_reboot_nb); out_oom_notifier: unregister_oom_notifier(&cmm_oom_nb); +out_balloon_compaction: + cmm_balloon_compaction_deinit(); return rc; } @@ -717,9 +668,9 @@ static void cmm_exit(void) unregister_oom_notifier(&cmm_oom_nb); unregister_reboot_notifier(&cmm_reboot_nb); unregister_memory_notifier(&cmm_mem_nb); - unregister_memory_isolate_notifier(&cmm_mem_isolate_nb); - cmm_free_pages(loaned_pages); + cmm_free_pages(atomic_long_read(&loaned_pages)); cmm_unregister_sysfs(&cmm_dev); + cmm_balloon_compaction_deinit(); } /** @@ -739,7 +690,7 @@ static int cmm_set_disable(const char *val, const struct kernel_param *kp) if (cmm_thread_ptr) kthread_stop(cmm_thread_ptr); cmm_thread_ptr = NULL; - cmm_free_pages(loaned_pages); + cmm_free_pages(atomic_long_read(&loaned_pages)); } else if (!disable && cmm_disabled) { cmm_thread_ptr = kthread_run(cmm_thread, NULL, "cmmthread"); if (IS_ERR(cmm_thread_ptr)) diff --git a/arch/powerpc/platforms/pseries/dtl.c b/arch/powerpc/platforms/pseries/dtl.c index 2b87480f2837..eab8aa293743 100644 --- a/arch/powerpc/platforms/pseries/dtl.c +++ b/arch/powerpc/platforms/pseries/dtl.c @@ -19,7 +19,6 @@ struct dtl { struct dtl_entry *buf; - struct dentry *file; int cpu; int buf_entries; u64 last_idx; @@ -320,46 +319,28 @@ static const struct file_operations dtl_fops = { static struct dentry *dtl_dir; -static int dtl_setup_file(struct dtl *dtl) +static void dtl_setup_file(struct dtl *dtl) { char name[10]; sprintf(name, "cpu-%d", dtl->cpu); - dtl->file = debugfs_create_file(name, 0400, dtl_dir, dtl, &dtl_fops); - if (!dtl->file) - return -ENOMEM; - - return 0; + debugfs_create_file(name, 0400, dtl_dir, dtl, &dtl_fops); } static int dtl_init(void) { - struct dentry *event_mask_file, *buf_entries_file; - int rc, i; + int i; if (!firmware_has_feature(FW_FEATURE_SPLPAR)) return -ENODEV; /* set up common debugfs structure */ - rc = -ENOMEM; dtl_dir = debugfs_create_dir("dtl", powerpc_debugfs_root); - if (!dtl_dir) { - printk(KERN_WARNING "%s: can't create dtl root dir\n", - __func__); - goto err; - } - event_mask_file = debugfs_create_x8("dtl_event_mask", 0600, - dtl_dir, &dtl_event_mask); - buf_entries_file = debugfs_create_u32("dtl_buf_entries", 0400, - dtl_dir, &dtl_buf_entries); - - if (!event_mask_file || !buf_entries_file) { - printk(KERN_WARNING "%s: can't create dtl files\n", __func__); - goto err_remove_dir; - } + debugfs_create_x8("dtl_event_mask", 0600, dtl_dir, &dtl_event_mask); + debugfs_create_u32("dtl_buf_entries", 0400, dtl_dir, &dtl_buf_entries); /* set up the per-cpu log structures */ for_each_possible_cpu(i) { @@ -367,16 +348,9 @@ static int dtl_init(void) spin_lock_init(&dtl->lock); dtl->cpu = i; - rc = dtl_setup_file(dtl); - if (rc) - goto err_remove_dir; + dtl_setup_file(dtl); } return 0; - -err_remove_dir: - debugfs_remove_recursive(dtl_dir); -err: - return rc; } machine_arch_initcall(pseries, dtl_init); diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c index bbda646b63b5..3e8cbfe7a80f 100644 --- a/arch/powerpc/platforms/pseries/hotplug-cpu.c +++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c @@ -338,6 +338,62 @@ static void pseries_remove_processor(struct device_node *np) cpu_maps_update_done(); } +static int dlpar_offline_cpu(struct device_node *dn) +{ + int rc = 0; + unsigned int cpu; + int len, nthreads, i; + const __be32 *intserv; + u32 thread; + + intserv = of_get_property(dn, "ibm,ppc-interrupt-server#s", &len); + if (!intserv) + return -EINVAL; + + nthreads = len / sizeof(u32); + + cpu_maps_update_begin(); + for (i = 0; i < nthreads; i++) { + thread = be32_to_cpu(intserv[i]); + for_each_present_cpu(cpu) { + if (get_hard_smp_processor_id(cpu) != thread) + continue; + + if (get_cpu_current_state(cpu) == CPU_STATE_OFFLINE) + break; + + if (get_cpu_current_state(cpu) == CPU_STATE_ONLINE) { + set_preferred_offline_state(cpu, + CPU_STATE_OFFLINE); + cpu_maps_update_done(); + timed_topology_update(1); + rc = device_offline(get_cpu_device(cpu)); + if (rc) + goto out; + cpu_maps_update_begin(); + break; + } + + /* + * The cpu is in CPU_STATE_INACTIVE. + * Upgrade it's state to CPU_STATE_OFFLINE. + */ + set_preferred_offline_state(cpu, CPU_STATE_OFFLINE); + WARN_ON(plpar_hcall_norets(H_PROD, thread) != H_SUCCESS); + __cpu_die(cpu); + break; + } + if (cpu == num_possible_cpus()) { + pr_warn("Could not find cpu to offline with physical id 0x%x\n", + thread); + } + } + cpu_maps_update_done(); + +out: + return rc; +} + static int dlpar_online_cpu(struct device_node *dn) { int rc = 0; @@ -364,8 +420,10 @@ static int dlpar_online_cpu(struct device_node *dn) timed_topology_update(1); find_and_online_cpu_nid(cpu); rc = device_online(get_cpu_device(cpu)); - if (rc) + if (rc) { + dlpar_offline_cpu(dn); goto out; + } cpu_maps_update_begin(); break; @@ -407,17 +465,67 @@ static bool dlpar_cpu_exists(struct device_node *parent, u32 drc_index) return found; } +static bool drc_info_valid_index(struct device_node *parent, u32 drc_index) +{ + struct property *info; + struct of_drc_info drc; + const __be32 *value; + u32 index; + int count, i, j; + + info = of_find_property(parent, "ibm,drc-info", NULL); + if (!info) + return false; + + value = of_prop_next_u32(info, NULL, &count); + + /* First value of ibm,drc-info is number of drc-info records */ + if (value) + value++; + else + return false; + + for (i = 0; i < count; i++) { + if (of_read_drc_info_cell(&info, &value, &drc)) + return false; + + if (strncmp(drc.drc_type, "CPU", 3)) + break; + + if (drc_index > drc.last_drc_index) + continue; + + index = drc.drc_index_start; + for (j = 0; j < drc.num_sequential_elems; j++) { + if (drc_index == index) + return true; + + index += drc.sequential_inc; + } + } + + return false; +} + static bool valid_cpu_drc_index(struct device_node *parent, u32 drc_index) { bool found = false; int rc, index; - index = 0; + if (of_find_property(parent, "ibm,drc-info", NULL)) + return drc_info_valid_index(parent, drc_index); + + /* Note that the format of the ibm,drc-indexes array is + * the number of entries in the array followed by the array + * of drc values so we start looking at index = 1. + */ + index = 1; while (!found) { u32 drc; rc = of_property_read_u32_index(parent, "ibm,drc-indexes", index++, &drc); + if (rc) break; @@ -505,63 +613,6 @@ static ssize_t dlpar_cpu_add(u32 drc_index) return rc; } -static int dlpar_offline_cpu(struct device_node *dn) -{ - int rc = 0; - unsigned int cpu; - int len, nthreads, i; - const __be32 *intserv; - u32 thread; - - intserv = of_get_property(dn, "ibm,ppc-interrupt-server#s", &len); - if (!intserv) - return -EINVAL; - - nthreads = len / sizeof(u32); - - cpu_maps_update_begin(); - for (i = 0; i < nthreads; i++) { - thread = be32_to_cpu(intserv[i]); - for_each_present_cpu(cpu) { - if (get_hard_smp_processor_id(cpu) != thread) - continue; - - if (get_cpu_current_state(cpu) == CPU_STATE_OFFLINE) - break; - - if (get_cpu_current_state(cpu) == CPU_STATE_ONLINE) { - set_preferred_offline_state(cpu, - CPU_STATE_OFFLINE); - cpu_maps_update_done(); - timed_topology_update(1); - rc = device_offline(get_cpu_device(cpu)); - if (rc) - goto out; - cpu_maps_update_begin(); - break; - - } - - /* - * The cpu is in CPU_STATE_INACTIVE. - * Upgrade it's state to CPU_STATE_OFFLINE. - */ - set_preferred_offline_state(cpu, CPU_STATE_OFFLINE); - BUG_ON(plpar_hcall_norets(H_PROD, thread) - != H_SUCCESS); - __cpu_die(cpu); - break; - } - if (cpu == num_possible_cpus()) - printk(KERN_WARNING "Could not find cpu to offline with physical id 0x%x\n", thread); - } - cpu_maps_update_done(); - -out: - return rc; - -} - static ssize_t dlpar_cpu_remove(struct device_node *dn, u32 drc_index) { int rc; @@ -717,19 +768,52 @@ static int dlpar_cpu_remove_by_count(u32 cpus_to_remove) return rc; } -static int find_dlpar_cpus_to_add(u32 *cpu_drcs, u32 cpus_to_add) +static int find_drc_info_cpus_to_add(struct device_node *cpus, + struct property *info, + u32 *cpu_drcs, u32 cpus_to_add) { - struct device_node *parent; + struct of_drc_info drc; + const __be32 *value; + u32 count, drc_index; int cpus_found = 0; - int index, rc; + int i, j; - parent = of_find_node_by_path("/cpus"); - if (!parent) { - pr_warn("Could not find CPU root node in device tree\n"); - kfree(cpu_drcs); + if (!info) return -1; + + value = of_prop_next_u32(info, NULL, &count); + if (value) + value++; + + for (i = 0; i < count; i++) { + of_read_drc_info_cell(&info, &value, &drc); + if (strncmp(drc.drc_type, "CPU", 3)) + break; + + drc_index = drc.drc_index_start; + for (j = 0; j < drc.num_sequential_elems; j++) { + if (dlpar_cpu_exists(cpus, drc_index)) + continue; + + cpu_drcs[cpus_found++] = drc_index; + + if (cpus_found == cpus_to_add) + return cpus_found; + + drc_index += drc.sequential_inc; + } } + return cpus_found; +} + +static int find_drc_index_cpus_to_add(struct device_node *cpus, + u32 *cpu_drcs, u32 cpus_to_add) +{ + int cpus_found = 0; + int index, rc; + u32 drc_index; + /* Search the ibm,drc-indexes array for possible CPU drcs to * add. Note that the format of the ibm,drc-indexes array is * the number of entries in the array followed by the array @@ -737,25 +821,25 @@ static int find_dlpar_cpus_to_add(u32 *cpu_drcs, u32 cpus_to_add) */ index = 1; while (cpus_found < cpus_to_add) { - u32 drc; + rc = of_property_read_u32_index(cpus, "ibm,drc-indexes", + index++, &drc_index); - rc = of_property_read_u32_index(parent, "ibm,drc-indexes", - index++, &drc); if (rc) break; - if (dlpar_cpu_exists(parent, drc)) + if (dlpar_cpu_exists(cpus, drc_index)) continue; - cpu_drcs[cpus_found++] = drc; + cpu_drcs[cpus_found++] = drc_index; } - of_node_put(parent); return cpus_found; } static int dlpar_cpu_add_by_count(u32 cpus_to_add) { + struct device_node *parent; + struct property *info; u32 *cpu_drcs; int cpus_added = 0; int cpus_found; @@ -767,7 +851,21 @@ static int dlpar_cpu_add_by_count(u32 cpus_to_add) if (!cpu_drcs) return -EINVAL; - cpus_found = find_dlpar_cpus_to_add(cpu_drcs, cpus_to_add); + parent = of_find_node_by_path("/cpus"); + if (!parent) { + pr_warn("Could not find CPU root node in device tree\n"); + kfree(cpu_drcs); + return -1; + } + + info = of_find_property(parent, "ibm,drc-info", NULL); + if (info) + cpus_found = find_drc_info_cpus_to_add(parent, info, cpu_drcs, cpus_to_add); + else + cpus_found = find_drc_index_cpus_to_add(parent, cpu_drcs, cpus_to_add); + + of_node_put(parent); + if (cpus_found < cpus_to_add) { pr_warn("Failed to find enough CPUs (%d of %d) to add\n", cpus_found, cpus_to_add); diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c index 8e700390f3d6..c126b94d1943 100644 --- a/arch/powerpc/platforms/pseries/hotplug-memory.c +++ b/arch/powerpc/platforms/pseries/hotplug-memory.c @@ -338,7 +338,7 @@ static int pseries_remove_mem_node(struct device_node *np) static bool lmb_is_removable(struct drmem_lmb *lmb) { int i, scns_per_block; - int rc = 1; + bool rc = true; unsigned long pfn, block_sz; u64 phys_addr; @@ -363,11 +363,11 @@ static bool lmb_is_removable(struct drmem_lmb *lmb) if (!pfn_present(pfn)) continue; - rc &= is_mem_section_removable(pfn, PAGES_PER_SECTION); + rc = rc && is_mem_section_removable(pfn, PAGES_PER_SECTION); phys_addr += MIN_MEMORY_BLOCK_SIZE; } - return rc ? true : false; + return rc; } static int dlpar_add_lmb(struct drmem_lmb *); diff --git a/arch/powerpc/platforms/pseries/hvCall_inst.c b/arch/powerpc/platforms/pseries/hvCall_inst.c index bcc1b67417a8..c40c62ec432e 100644 --- a/arch/powerpc/platforms/pseries/hvCall_inst.c +++ b/arch/powerpc/platforms/pseries/hvCall_inst.c @@ -129,7 +129,6 @@ static void probe_hcall_exit(void *ignored, unsigned long opcode, long retval, static int __init hcall_inst_init(void) { struct dentry *hcall_root; - struct dentry *hcall_file; char cpu_name_buf[CPU_NAME_BUF_SIZE]; int cpu; @@ -145,17 +144,12 @@ static int __init hcall_inst_init(void) } hcall_root = debugfs_create_dir(HCALL_ROOT_DIR, NULL); - if (!hcall_root) - return -ENOMEM; for_each_possible_cpu(cpu) { snprintf(cpu_name_buf, CPU_NAME_BUF_SIZE, "cpu%d", cpu); - hcall_file = debugfs_create_file(cpu_name_buf, 0444, - hcall_root, - per_cpu(hcall_stats, cpu), - &hcall_inst_seq_fops); - if (!hcall_file) - return -ENOMEM; + debugfs_create_file(cpu_name_buf, 0444, hcall_root, + per_cpu(hcall_stats, cpu), + &hcall_inst_seq_fops); } return 0; diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index f87a5c64e24d..60cb29ae4739 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -774,7 +774,7 @@ static long pSeries_lpar_hpte_remove(unsigned long hpte_group) /* don't remove a bolted entry */ lpar_rc = plpar_pte_remove(H_ANDCOND, hpte_group + slot_offset, - (0x1UL << 4), &dummy1, &dummy2); + HPTE_V_BOLTED, &dummy1, &dummy2); if (lpar_rc == H_SUCCESS) return i; @@ -938,11 +938,19 @@ static long pSeries_lpar_hpte_find(unsigned long vpn, int psize, int ssize) hash = hpt_hash(vpn, mmu_psize_defs[psize].shift, ssize); want_v = hpte_encode_avpn(vpn, psize, ssize); - /* Bolted entries are always in the primary group */ + /* + * We try to keep bolted entries always in primary hash + * But in some case we can find them in secondary too. + */ hpte_group = (hash & htab_hash_mask) * HPTES_PER_GROUP; slot = __pSeries_lpar_hpte_find(want_v, hpte_group); - if (slot < 0) - return -1; + if (slot < 0) { + /* Try in secondary */ + hpte_group = (~hash & htab_hash_mask) * HPTES_PER_GROUP; + slot = __pSeries_lpar_hpte_find(want_v, hpte_group); + if (slot < 0) + return -1; + } return hpte_group + slot; } @@ -1992,30 +2000,17 @@ static int __init vpa_debugfs_init(void) { char name[16]; long i; - static struct dentry *vpa_dir; + struct dentry *vpa_dir; if (!firmware_has_feature(FW_FEATURE_SPLPAR)) return 0; vpa_dir = debugfs_create_dir("vpa", powerpc_debugfs_root); - if (!vpa_dir) { - pr_warn("%s: can't create vpa root dir\n", __func__); - return -ENOMEM; - } /* set up the per-cpu vpa file*/ for_each_possible_cpu(i) { - struct dentry *d; - sprintf(name, "cpu-%ld", i); - - d = debugfs_create_file(name, 0400, vpa_dir, (void *)i, - &vpa_fops); - if (!d) { - pr_warn("%s: can't create per-cpu vpa file\n", - __func__); - return -ENOMEM; - } + debugfs_create_file(name, 0400, vpa_dir, (void *)i, &vpa_fops); } return 0; diff --git a/arch/powerpc/platforms/pseries/of_helpers.c b/arch/powerpc/platforms/pseries/of_helpers.c index 6df192f38f80..66dfd8256712 100644 --- a/arch/powerpc/platforms/pseries/of_helpers.c +++ b/arch/powerpc/platforms/pseries/of_helpers.c @@ -45,14 +45,14 @@ struct device_node *pseries_of_derive_parent(const char *path) int of_read_drc_info_cell(struct property **prop, const __be32 **curval, struct of_drc_info *data) { - const char *p; + const char *p = (char *)(*curval); const __be32 *p2; if (!data) return -EINVAL; /* Get drc-type:encode-string */ - p = data->drc_type = (char*) (*curval); + data->drc_type = (char *)p; p = of_prop_next_string(*prop, p); if (!p) return -EINVAL; @@ -65,9 +65,7 @@ int of_read_drc_info_cell(struct property **prop, const __be32 **curval, /* Get drc-index-start:encode-int */ p2 = (const __be32 *)p; - p2 = of_prop_next_u32(*prop, p2, &data->drc_index_start); - if (!p2) - return -EINVAL; + data->drc_index_start = be32_to_cpu(*p2); /* Get drc-name-suffix-start:encode-int */ p2 = of_prop_next_u32(*prop, p2, &data->drc_name_suffix_start); diff --git a/arch/powerpc/platforms/pseries/papr_scm.c b/arch/powerpc/platforms/pseries/papr_scm.c index 61883291defc..c2ef320ba1bf 100644 --- a/arch/powerpc/platforms/pseries/papr_scm.c +++ b/arch/powerpc/platforms/pseries/papr_scm.c @@ -152,7 +152,7 @@ static int papr_scm_meta_get(struct papr_scm_priv *p, int len, read; int64_t ret; - if ((hdr->in_offset + hdr->in_length) >= p->metadata_size) + if ((hdr->in_offset + hdr->in_length) > p->metadata_size) return -EINVAL; for (len = hdr->in_length; len; len -= read) { @@ -206,7 +206,7 @@ static int papr_scm_meta_set(struct papr_scm_priv *p, __be64 data_be; int64_t ret; - if ((hdr->in_offset + hdr->in_length) >= p->metadata_size) + if ((hdr->in_offset + hdr->in_length) > p->metadata_size) return -EINVAL; for (len = hdr->in_length; len; len -= wrote) { @@ -284,25 +284,6 @@ int papr_scm_ndctl(struct nvdimm_bus_descriptor *nd_desc, struct nvdimm *nvdimm, return 0; } -static const struct attribute_group *region_attr_groups[] = { - &nd_region_attribute_group, - &nd_device_attribute_group, - &nd_mapping_attribute_group, - &nd_numa_attribute_group, - NULL, -}; - -static const struct attribute_group *bus_attr_groups[] = { - &nvdimm_bus_attribute_group, - NULL, -}; - -static const struct attribute_group *papr_scm_dimm_groups[] = { - &nvdimm_attribute_group, - &nd_device_attribute_group, - NULL, -}; - static inline int papr_scm_node(int node) { int min_dist = INT_MAX, dist; @@ -333,7 +314,6 @@ static int papr_scm_nvdimm_init(struct papr_scm_priv *p) p->bus_desc.ndctl = papr_scm_ndctl; p->bus_desc.module = THIS_MODULE; p->bus_desc.of_node = p->pdev->dev.of_node; - p->bus_desc.attr_groups = bus_attr_groups; p->bus_desc.provider_name = kstrdup(p->pdev->name, GFP_KERNEL); if (!p->bus_desc.provider_name) @@ -348,8 +328,8 @@ static int papr_scm_nvdimm_init(struct papr_scm_priv *p) dimm_flags = 0; set_bit(NDD_ALIASING, &dimm_flags); - p->nvdimm = nvdimm_create(p->bus, p, papr_scm_dimm_groups, - dimm_flags, PAPR_SCM_DIMM_CMD_MASK, 0, NULL); + p->nvdimm = nvdimm_create(p->bus, p, NULL, dimm_flags, + PAPR_SCM_DIMM_CMD_MASK, 0, NULL); if (!p->nvdimm) { dev_err(dev, "Error creating DIMM object for %pOF\n", p->dn); goto err; @@ -366,7 +346,6 @@ static int papr_scm_nvdimm_init(struct papr_scm_priv *p) mapping.size = p->blocks * p->block_size; // XXX: potential overflow? memset(&ndr_desc, 0, sizeof(ndr_desc)); - ndr_desc.attr_groups = region_attr_groups; target_nid = dev_to_node(&p->pdev->dev); online_nid = papr_scm_node(target_nid); ndr_desc.numa_node = online_nid; @@ -513,7 +492,6 @@ static struct platform_driver papr_scm_driver = { .remove = papr_scm_remove, .driver = { .name = "papr_scm", - .owner = THIS_MODULE, .of_match_table = papr_scm_match, }, }; diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c index 561917fa54a8..361986e4354e 100644 --- a/arch/powerpc/platforms/pseries/pci_dlpar.c +++ b/arch/powerpc/platforms/pseries/pci_dlpar.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * PCI Dynamic LPAR, PCI Hot Plug and PCI EEH recovery code * for RPA-compliant PPC64 platform. @@ -6,23 +7,6 @@ * * Updates, 2005, John Rose <johnrose@austin.ibm.com> * Updates, 2005, Linas Vepstas <linas@austin.ibm.com> - * - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/pci.h> diff --git a/arch/powerpc/platforms/pseries/pseries_energy.c b/arch/powerpc/platforms/pseries/pseries_energy.c index a96874f9492f..09e98d301db0 100644 --- a/arch/powerpc/platforms/pseries/pseries_energy.c +++ b/arch/powerpc/platforms/pseries/pseries_energy.c @@ -36,6 +36,7 @@ static int sysfs_entries; static u32 cpu_to_drc_index(int cpu) { struct device_node *dn = NULL; + struct property *info; int thread_index; int rc = 1; u32 ret = 0; @@ -47,20 +48,18 @@ static u32 cpu_to_drc_index(int cpu) /* Convert logical cpu number to core number */ thread_index = cpu_core_index_of_thread(cpu); - if (firmware_has_feature(FW_FEATURE_DRC_INFO)) { - struct property *info = NULL; + info = of_find_property(dn, "ibm,drc-info", NULL); + if (info) { struct of_drc_info drc; int j; u32 num_set_entries; const __be32 *value; - info = of_find_property(dn, "ibm,drc-info", NULL); - if (info == NULL) - goto err_of_node_put; - value = of_prop_next_u32(info, NULL, &num_set_entries); if (!value) goto err_of_node_put; + else + value++; for (j = 0; j < num_set_entries; j++) { @@ -110,6 +109,7 @@ err: static int drc_index_to_cpu(u32 drc_index) { struct device_node *dn = NULL; + struct property *info; const int *indexes; int thread_index = 0, cpu = 0; int rc = 1; @@ -117,21 +117,18 @@ static int drc_index_to_cpu(u32 drc_index) dn = of_find_node_by_path("/cpus"); if (dn == NULL) goto err; - - if (firmware_has_feature(FW_FEATURE_DRC_INFO)) { - struct property *info = NULL; + info = of_find_property(dn, "ibm,drc-info", NULL); + if (info) { struct of_drc_info drc; int j; u32 num_set_entries; const __be32 *value; - info = of_find_property(dn, "ibm,drc-info", NULL); - if (info == NULL) - goto err_of_node_put; - value = of_prop_next_u32(info, NULL, &num_set_entries); if (!value) goto err_of_node_put; + else + value++; for (j = 0; j < num_set_entries; j++) { diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c index 3acdcc3bb908..1d7f973c647b 100644 --- a/arch/powerpc/platforms/pseries/ras.c +++ b/arch/powerpc/platforms/pseries/ras.c @@ -255,7 +255,7 @@ static void rtas_parse_epow_errlog(struct rtas_error_log *log) break; case EPOW_SYSTEM_SHUTDOWN: - handle_system_shutdown(epow_log->event_modifier); + handle_system_shutdown(modifier); break; case EPOW_SYSTEM_HALT: diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 603b3c656d19..cb5a5bd2cef5 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -24,7 +24,6 @@ obj-$(CONFIG_FSL_CORENET_RCPM) += fsl_rcpm.o obj-$(CONFIG_FSL_LBC) += fsl_lbc.o obj-$(CONFIG_FSL_GTM) += fsl_gtm.o obj-$(CONFIG_FSL_85XX_CACHE_SRAM) += fsl_85xx_l2ctlr.o fsl_85xx_cache_sram.o -obj-$(CONFIG_SIMPLE_GPIO) += simple_gpio.o obj-$(CONFIG_FSL_RIO) += fsl_rio.o fsl_rmu.o obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o obj-$(CONFIG_RTC_DRV_CMOS) += rtc_cmos_setup.o diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index ff0e2b156cb5..617a443d673d 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -115,8 +115,8 @@ static void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev) { struct pci_controller *hose = pci_bus_to_host(pdev->bus); - pdev->dev.bus_dma_mask = - hose->dma_window_base_cur + hose->dma_window_size; + pdev->dev.bus_dma_limit = + hose->dma_window_base_cur + hose->dma_window_size - 1; } static void setup_swiotlb_ops(struct pci_controller *hose) @@ -135,7 +135,7 @@ static void fsl_pci_dma_set_mask(struct device *dev, u64 dma_mask) * mapping that allows addressing any RAM address from across PCI. */ if (dev_is_pci(dev) && dma_mask >= pci64_dma_offset * 2 - 1) { - dev->bus_dma_mask = 0; + dev->bus_dma_limit = 0; dev->archdata.dma_offset = pci64_dma_offset; } } diff --git a/arch/powerpc/sysdev/simple_gpio.c b/arch/powerpc/sysdev/simple_gpio.c deleted file mode 100644 index dc1740cd9e42..000000000000 --- a/arch/powerpc/sysdev/simple_gpio.c +++ /dev/null @@ -1,143 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Simple Memory-Mapped GPIOs - * - * Copyright (c) MontaVista Software, Inc. 2008. - * - * Author: Anton Vorontsov <avorontsov@ru.mvista.com> - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/spinlock.h> -#include <linux/types.h> -#include <linux/ioport.h> -#include <linux/io.h> -#include <linux/of.h> -#include <linux/of_gpio.h> -#include <linux/gpio/driver.h> -#include <linux/slab.h> -#include <asm/prom.h> -#include "simple_gpio.h" - -struct u8_gpio_chip { - struct of_mm_gpio_chip mm_gc; - spinlock_t lock; - - /* shadowed data register to clear/set bits safely */ - u8 data; -}; - -static u8 u8_pin2mask(unsigned int pin) -{ - return 1 << (8 - 1 - pin); -} - -static int u8_gpio_get(struct gpio_chip *gc, unsigned int gpio) -{ - struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); - - return !!(in_8(mm_gc->regs) & u8_pin2mask(gpio)); -} - -static void u8_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) -{ - struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); - struct u8_gpio_chip *u8_gc = gpiochip_get_data(gc); - unsigned long flags; - - spin_lock_irqsave(&u8_gc->lock, flags); - - if (val) - u8_gc->data |= u8_pin2mask(gpio); - else - u8_gc->data &= ~u8_pin2mask(gpio); - - out_8(mm_gc->regs, u8_gc->data); - - spin_unlock_irqrestore(&u8_gc->lock, flags); -} - -static int u8_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio) -{ - return 0; -} - -static int u8_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) -{ - u8_gpio_set(gc, gpio, val); - return 0; -} - -static void u8_gpio_save_regs(struct of_mm_gpio_chip *mm_gc) -{ - struct u8_gpio_chip *u8_gc = - container_of(mm_gc, struct u8_gpio_chip, mm_gc); - - u8_gc->data = in_8(mm_gc->regs); -} - -static int __init u8_simple_gpiochip_add(struct device_node *np) -{ - int ret; - struct u8_gpio_chip *u8_gc; - struct of_mm_gpio_chip *mm_gc; - struct gpio_chip *gc; - - u8_gc = kzalloc(sizeof(*u8_gc), GFP_KERNEL); - if (!u8_gc) - return -ENOMEM; - - spin_lock_init(&u8_gc->lock); - - mm_gc = &u8_gc->mm_gc; - gc = &mm_gc->gc; - - mm_gc->save_regs = u8_gpio_save_regs; - gc->ngpio = 8; - gc->direction_input = u8_gpio_dir_in; - gc->direction_output = u8_gpio_dir_out; - gc->get = u8_gpio_get; - gc->set = u8_gpio_set; - - ret = of_mm_gpiochip_add_data(np, mm_gc, u8_gc); - if (ret) - goto err; - return 0; -err: - kfree(u8_gc); - return ret; -} - -void __init simple_gpiochip_init(const char *compatible) -{ - struct device_node *np; - - for_each_compatible_node(np, NULL, compatible) { - int ret; - struct resource r; - - ret = of_address_to_resource(np, 0, &r); - if (ret) - goto err; - - switch (resource_size(&r)) { - case 1: - ret = u8_simple_gpiochip_add(np); - if (ret) - goto err; - break; - default: - /* - * Whenever you need support for GPIO bank width > 1, - * please just turn u8_ code into huge macros, and - * construct needed uX_ code with it. - */ - ret = -ENOSYS; - goto err; - } - continue; -err: - pr_err("%pOF: registration failed, status %d\n", np, ret); - } -} diff --git a/arch/powerpc/sysdev/simple_gpio.h b/arch/powerpc/sysdev/simple_gpio.h deleted file mode 100644 index f3f3a20d39e2..000000000000 --- a/arch/powerpc/sysdev/simple_gpio.h +++ /dev/null @@ -1,13 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __SYSDEV_SIMPLE_GPIO_H -#define __SYSDEV_SIMPLE_GPIO_H - -#include <linux/errno.h> - -#ifdef CONFIG_SIMPLE_GPIO -extern void simple_gpiochip_init(const char *compatible); -#else -static inline void simple_gpiochip_init(const char *compatible) {} -#endif /* CONFIG_SIMPLE_GPIO */ - -#endif /* __SYSDEV_SIMPLE_GPIO_H */ diff --git a/arch/powerpc/sysdev/xive/common.c b/arch/powerpc/sysdev/xive/common.c index df832b09e3e9..f5fadbd2533a 100644 --- a/arch/powerpc/sysdev/xive/common.c +++ b/arch/powerpc/sysdev/xive/common.c @@ -1035,6 +1035,15 @@ static int xive_irq_alloc_data(unsigned int virq, irq_hw_number_t hw) xd->target = XIVE_INVALID_TARGET; irq_set_handler_data(virq, xd); + /* + * Turn OFF by default the interrupt being mapped. A side + * effect of this check is the mapping the ESB page of the + * interrupt in the Linux address space. This prevents page + * fault issues in the crash handler which masks all + * interrupts. + */ + xive_esb_read(xd, XIVE_ESB_SET_PQ_01); + return 0; } diff --git a/arch/powerpc/sysdev/xive/spapr.c b/arch/powerpc/sysdev/xive/spapr.c index 33c10749edec..55dc61cb4867 100644 --- a/arch/powerpc/sysdev/xive/spapr.c +++ b/arch/powerpc/sysdev/xive/spapr.c @@ -392,20 +392,28 @@ static int xive_spapr_populate_irq_data(u32 hw_irq, struct xive_irq_data *data) data->esb_shift = esb_shift; data->trig_page = trig_page; + data->hw_irq = hw_irq; + /* * No chip-id for the sPAPR backend. This has an impact how we * pick a target. See xive_pick_irq_target(). */ data->src_chip = XIVE_INVALID_CHIP_ID; + /* + * When the H_INT_ESB flag is set, the H_INT_ESB hcall should + * be used for interrupt management. Skip the remapping of the + * ESB pages which are not available. + */ + if (data->flags & XIVE_IRQ_FLAG_H_INT_ESB) + return 0; + data->eoi_mmio = ioremap(data->eoi_page, 1u << data->esb_shift); if (!data->eoi_mmio) { pr_err("Failed to map EOI page for irq 0x%x\n", hw_irq); return -ENOMEM; } - data->hw_irq = hw_irq; - /* Full function page supports trigger */ if (flags & XIVE_SRC_TRIGGER) { data->trig_mmio = data->eoi_mmio; diff --git a/arch/powerpc/tools/relocs_check.sh b/arch/powerpc/tools/relocs_check.sh index 2b4e959caa36..7b9fe0a567cf 100755 --- a/arch/powerpc/tools/relocs_check.sh +++ b/arch/powerpc/tools/relocs_check.sh @@ -20,7 +20,7 @@ objdump="$1" vmlinux="$2" bad_relocs=$( -"$objdump" -R "$vmlinux" | +$objdump -R "$vmlinux" | # Only look at relocation lines. grep -E '\<R_' | # These relocations are okay diff --git a/arch/powerpc/tools/unrel_branch_check.sh b/arch/powerpc/tools/unrel_branch_check.sh index 1e972df3107e..77114755dc6f 100755 --- a/arch/powerpc/tools/unrel_branch_check.sh +++ b/arch/powerpc/tools/unrel_branch_check.sh @@ -18,14 +18,14 @@ vmlinux="$2" #__end_interrupts should be located within the first 64K end_intr=0x$( -"$objdump" -R "$vmlinux" -d --start-address=0xc000000000000000 \ +$objdump -R "$vmlinux" -d --start-address=0xc000000000000000 \ --stop-address=0xc000000000010000 | grep '\<__end_interrupts>:' | awk '{print $1}' ) BRANCHES=$( -"$objdump" -R "$vmlinux" -D --start-address=0xc000000000000000 \ +$objdump -R "$vmlinux" -D --start-address=0xc000000000000000 \ --stop-address=${end_intr} | grep -e "^c[0-9a-f]*:[[:space:]]*\([0-9a-f][0-9a-f][[:space:]]\)\{4\}[[:space:]]*b" | grep -v '\<__start_initialization_multiplatform>' | diff --git a/arch/powerpc/xmon/Makefile b/arch/powerpc/xmon/Makefile index f142570ad860..c3842dbeb1b7 100644 --- a/arch/powerpc/xmon/Makefile +++ b/arch/powerpc/xmon/Makefile @@ -1,8 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 # Makefile for xmon -# Disable clang warning for using setjmp without setjmp.h header -subdir-ccflags-y := $(call cc-disable-warning, builtin-requires-header) +# Avoid clang warnings around longjmp/setjmp declarations +subdir-ccflags-y := -ffreestanding GCOV_PROFILE := n KCOV_INSTRUMENT := n diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index d83364ebc5c5..a7056049709e 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -25,6 +25,7 @@ #include <linux/nmi.h> #include <linux/ctype.h> #include <linux/highmem.h> +#include <linux/security.h> #include <asm/debugfs.h> #include <asm/ptrace.h> @@ -187,6 +188,8 @@ static void dump_tlb_44x(void); static void dump_tlb_book3e(void); #endif +static void clear_all_bpt(void); + #ifdef CONFIG_PPC64 #define REG "%.16lx" #else @@ -283,10 +286,38 @@ Commands:\n\ " U show uptime information\n" " ? help\n" " # n limit output to n lines per page (for dp, dpa, dl)\n" -" zr reboot\n\ - zh halt\n" +" zr reboot\n" +" zh halt\n" ; +#ifdef CONFIG_SECURITY +static bool xmon_is_locked_down(void) +{ + static bool lockdown; + + if (!lockdown) { + lockdown = !!security_locked_down(LOCKDOWN_XMON_RW); + if (lockdown) { + printf("xmon: Disabled due to kernel lockdown\n"); + xmon_is_ro = true; + } + } + + if (!xmon_is_ro) { + xmon_is_ro = !!security_locked_down(LOCKDOWN_XMON_WR); + if (xmon_is_ro) + printf("xmon: Read-only due to kernel lockdown\n"); + } + + return lockdown; +} +#else /* CONFIG_SECURITY */ +static inline bool xmon_is_locked_down(void) +{ + return false; +} +#endif + static struct pt_regs *xmon_regs; static inline void sync(void) @@ -438,7 +469,10 @@ static bool wait_for_other_cpus(int ncpus) return false; } -#endif /* CONFIG_SMP */ +#else /* CONFIG_SMP */ +static inline void get_output_lock(void) {} +static inline void release_output_lock(void) {} +#endif static inline int unrecoverable_excp(struct pt_regs *regs) { @@ -455,6 +489,7 @@ static int xmon_core(struct pt_regs *regs, int fromipi) int cmd = 0; struct bpt *bp; long recurse_jmp[JMP_BUF_LEN]; + bool locked_down; unsigned long offset; unsigned long flags; #ifdef CONFIG_SMP @@ -465,6 +500,8 @@ static int xmon_core(struct pt_regs *regs, int fromipi) local_irq_save(flags); hard_irq_disable(); + locked_down = xmon_is_locked_down(); + if (!fromipi) { tracing_enabled = tracing_is_on(); tracing_off(); @@ -518,7 +555,8 @@ static int xmon_core(struct pt_regs *regs, int fromipi) if (!fromipi) { get_output_lock(); - excprint(regs); + if (!locked_down) + excprint(regs); if (bp) { printf("cpu 0x%x stopped at breakpoint 0x%tx (", cpu, BP_NUM(bp)); @@ -570,10 +608,14 @@ static int xmon_core(struct pt_regs *regs, int fromipi) } remove_bpts(); disable_surveillance(); - /* for breakpoint or single step, print the current instr. */ - if (bp || TRAP(regs) == 0xd00) - ppc_inst_dump(regs->nip, 1, 0); - printf("enter ? for help\n"); + + if (!locked_down) { + /* for breakpoint or single step, print curr insn */ + if (bp || TRAP(regs) == 0xd00) + ppc_inst_dump(regs->nip, 1, 0); + printf("enter ? for help\n"); + } + mb(); xmon_gate = 1; barrier(); @@ -597,8 +639,9 @@ static int xmon_core(struct pt_regs *regs, int fromipi) spin_cpu_relax(); touch_nmi_watchdog(); } else { - cmd = cmds(regs); - if (cmd != 0) { + if (!locked_down) + cmd = cmds(regs); + if (locked_down || cmd != 0) { /* exiting xmon */ insert_bpts(); xmon_gate = 0; @@ -635,13 +678,16 @@ static int xmon_core(struct pt_regs *regs, int fromipi) "can't continue\n"); remove_bpts(); disable_surveillance(); - /* for breakpoint or single step, print the current instr. */ - if (bp || TRAP(regs) == 0xd00) - ppc_inst_dump(regs->nip, 1, 0); - printf("enter ? for help\n"); + if (!locked_down) { + /* for breakpoint or single step, print current insn */ + if (bp || TRAP(regs) == 0xd00) + ppc_inst_dump(regs->nip, 1, 0); + printf("enter ? for help\n"); + } } - cmd = cmds(regs); + if (!locked_down) + cmd = cmds(regs); insert_bpts(); in_xmon = 0; @@ -670,7 +716,10 @@ static int xmon_core(struct pt_regs *regs, int fromipi) } } #endif - insert_cpu_bpts(); + if (locked_down) + clear_all_bpt(); + else + insert_cpu_bpts(); touch_nmi_watchdog(); local_irq_restore(flags); @@ -884,7 +933,7 @@ static void insert_cpu_bpts(void) if (dabr.enabled) { brk.address = dabr.address; brk.type = (dabr.enabled & HW_BRK_TYPE_DABR) | HW_BRK_TYPE_PRIV_ALL; - brk.len = 8; + brk.len = DABR_MAX_LEN; __set_breakpoint(&brk); } @@ -1047,10 +1096,6 @@ cmds(struct pt_regs *excp) set_lpp_cmd(); break; case 'b': - if (xmon_is_ro) { - printf(xmon_ro_msg); - break; - } bpt_cmds(); break; case 'C': @@ -1319,11 +1364,16 @@ bpt_cmds(void) struct bpt *bp; cmd = inchar(); + switch (cmd) { #ifndef CONFIG_PPC_8xx static const char badaddr[] = "Only kernel addresses are permitted for breakpoints\n"; int mode; case 'd': /* bd - hardware data breakpoint */ + if (xmon_is_ro) { + printf(xmon_ro_msg); + break; + } if (!ppc_breakpoint_available()) { printf("Hardware data breakpoint not supported on this cpu\n"); break; @@ -1351,6 +1401,10 @@ bpt_cmds(void) break; case 'i': /* bi - hardware instr breakpoint */ + if (xmon_is_ro) { + printf(xmon_ro_msg); + break; + } if (!cpu_has_feature(CPU_FTR_ARCH_207S)) { printf("Hardware instruction breakpoint " "not supported on this cpu\n"); @@ -1409,7 +1463,8 @@ bpt_cmds(void) break; } termch = cmd; - if (!scanhex(&a)) { + + if (xmon_is_ro || !scanhex(&a)) { /* print all breakpoints */ printf(" type address\n"); if (dabr.enabled) { @@ -3762,6 +3817,11 @@ static void xmon_init(int enable) #ifdef CONFIG_MAGIC_SYSRQ static void sysrq_handle_xmon(int key) { + if (xmon_is_locked_down()) { + clear_all_bpt(); + xmon_init(0); + return; + } /* ensure xmon is enabled */ xmon_init(1); debugger(get_irq_regs()); @@ -3783,7 +3843,6 @@ static int __init setup_xmon_sysrq(void) device_initcall(setup_xmon_sysrq); #endif /* CONFIG_MAGIC_SYSRQ */ -#ifdef CONFIG_DEBUG_FS static void clear_all_bpt(void) { int i; @@ -3801,18 +3860,22 @@ static void clear_all_bpt(void) iabr = NULL; dabr.enabled = 0; } - - printf("xmon: All breakpoints cleared\n"); } +#ifdef CONFIG_DEBUG_FS static int xmon_dbgfs_set(void *data, u64 val) { xmon_on = !!val; xmon_init(xmon_on); /* make sure all breakpoints removed when disabling */ - if (!xmon_on) + if (!xmon_on) { clear_all_bpt(); + get_output_lock(); + printf("xmon: All breakpoints cleared\n"); + release_output_lock(); + } + return 0; } @@ -3838,7 +3901,11 @@ static int xmon_early __initdata; static int __init early_parse_xmon(char *p) { - if (!p || strncmp(p, "early", 5) == 0) { + if (xmon_is_locked_down()) { + xmon_init(0); + xmon_early = 0; + xmon_on = 0; + } else if (!p || strncmp(p, "early", 5) == 0) { /* just "xmon" is equivalent to "xmon=early" */ xmon_init(1); xmon_early = 1; diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index 75a6c9117622..759ffb00267c 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -26,14 +26,16 @@ config RISCV select GENERIC_IRQ_SHOW select GENERIC_PCI_IOMAP select GENERIC_SCHED_CLOCK - select GENERIC_STRNCPY_FROM_USER - select GENERIC_STRNLEN_USER + select GENERIC_STRNCPY_FROM_USER if MMU + select GENERIC_STRNLEN_USER if MMU select GENERIC_SMP_IDLE_THREAD select GENERIC_ATOMIC64 if !64BIT + select GENERIC_IOREMAP select HAVE_ARCH_AUDITSYSCALL + select HAVE_ARCH_SECCOMP_FILTER select HAVE_ASM_MODVERSIONS select HAVE_MEMBLOCK_NODE_MAP - select HAVE_DMA_CONTIGUOUS + select HAVE_DMA_CONTIGUOUS if MMU select HAVE_FUTEX_CMPXCHG if FUTEX select HAVE_PERF_EVENTS select HAVE_PERF_REGS @@ -50,6 +52,7 @@ config RISCV select PCI_DOMAINS_GENERIC if PCI select PCI_MSI if PCI select RISCV_TIMER + select UACCESS_MEMCPY if !MMU select GENERIC_IRQ_MULTI_HANDLER select GENERIC_ARCH_TOPOLOGY if SMP select ARCH_HAS_PTE_SPECIAL @@ -60,7 +63,7 @@ config RISCV select ARCH_WANT_HUGE_PMD_SHARE if 64BIT select SPARSEMEM_STATIC if 32BIT select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU - select HAVE_ARCH_MMAP_RND_BITS + select HAVE_ARCH_MMAP_RND_BITS if MMU config ARCH_MMAP_RND_BITS_MIN default 18 if 64BIT @@ -72,8 +75,23 @@ config ARCH_MMAP_RND_BITS_MAX default 24 if 64BIT # SV39 based default 17 +# set if we run in machine mode, cleared if we run in supervisor mode +config RISCV_M_MODE + bool + default !MMU + +# set if we are running in S-mode and can use SBI calls +config RISCV_SBI + bool + depends on !RISCV_M_MODE + default y + config MMU - def_bool y + bool "MMU-based Paged Memory Management Support" + default y + help + Select if you want MMU-based virtualised addressing space + support by paged memory management. If unsure, say 'Y'. config ZONE_DMA32 bool @@ -92,6 +110,7 @@ config PA_BITS config PAGE_OFFSET hex default 0xC0000000 if 32BIT && MAXPHYSMEM_2GB + default 0x80000000 if 64BIT && !MMU default 0xffffffff80000000 if 64BIT && MAXPHYSMEM_2GB default 0xffffffe000000000 if 64BIT && MAXPHYSMEM_128GB @@ -135,7 +154,7 @@ config GENERIC_HWEIGHT def_bool y config FIX_EARLYCON_MEM - def_bool y + def_bool CONFIG_MMU config PGTABLE_LEVELS int @@ -160,6 +179,7 @@ config ARCH_RV32I select GENERIC_LIB_ASHRDI3 select GENERIC_LIB_LSHRDI3 select GENERIC_LIB_UCMPDI2 + select MMU config ARCH_RV64I bool "RV64I" @@ -168,9 +188,9 @@ config ARCH_RV64I select HAVE_FUNCTION_TRACER select HAVE_FUNCTION_GRAPH_TRACER select HAVE_FTRACE_MCOUNT_RECORD - select HAVE_DYNAMIC_FTRACE - select HAVE_DYNAMIC_FTRACE_WITH_REGS - select SWIOTLB + select HAVE_DYNAMIC_FTRACE if MMU + select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE + select SWIOTLB if MMU endchoice @@ -272,6 +292,19 @@ menu "Kernel features" source "kernel/Kconfig.hz" +config SECCOMP + bool "Enable seccomp to safely compute untrusted bytecode" + help + This kernel feature is useful for number crunching applications + that may need to compute untrusted bytecode during their + execution. By using pipes or other transports made available to + the process as file descriptors supporting the read/write + syscalls, it's possible to isolate those applications in + their own address space using seccomp. Once seccomp is + enabled via prctl(PR_SET_SECCOMP), it cannot be disabled + and the task is only allowed to execute a few safe syscalls + defined by each seccomp mode. + endmenu menu "Boot options" diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs index 536c0ef4aee8..634759ac8c71 100644 --- a/arch/riscv/Kconfig.socs +++ b/arch/riscv/Kconfig.socs @@ -1,13 +1,13 @@ menu "SoC selection" config SOC_SIFIVE - bool "SiFive SoCs" - select SERIAL_SIFIVE - select SERIAL_SIFIVE_CONSOLE - select CLK_SIFIVE - select CLK_SIFIVE_FU540_PRCI - select SIFIVE_PLIC - help - This enables support for SiFive SoC platform hardware. + bool "SiFive SoCs" + select SERIAL_SIFIVE + select SERIAL_SIFIVE_CONSOLE + select CLK_SIFIVE + select CLK_SIFIVE_FU540_PRCI + select SIFIVE_PLIC + help + This enables support for SiFive SoC platform hardware. endmenu diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile index f5e914210245..b9009a2fbaf5 100644 --- a/arch/riscv/Makefile +++ b/arch/riscv/Makefile @@ -83,13 +83,18 @@ PHONY += vdso_install vdso_install: $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@ -all: Image.gz +ifeq ($(CONFIG_RISCV_M_MODE),y) +KBUILD_IMAGE := $(boot)/loader +else +KBUILD_IMAGE := $(boot)/Image.gz +endif +BOOT_TARGETS := Image Image.gz loader -Image: vmlinux - $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ +all: $(notdir $(KBUILD_IMAGE)) -Image.%: Image +$(BOOT_TARGETS): vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ + @$(kecho) ' Kernel: $(boot)/$@ is ready' zinstall install: $(Q)$(MAKE) $(build)=$(boot) $@ diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile index 0990a9fdbe5d..a474f98ce4fa 100644 --- a/arch/riscv/boot/Makefile +++ b/arch/riscv/boot/Makefile @@ -16,7 +16,7 @@ OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S -targets := Image +targets := Image loader $(obj)/Image: vmlinux FORCE $(call if_changed,objcopy) @@ -24,6 +24,23 @@ $(obj)/Image: vmlinux FORCE $(obj)/Image.gz: $(obj)/Image FORCE $(call if_changed,gzip) +loader.o: $(src)/loader.S $(obj)/Image + +$(obj)/loader: $(obj)/loader.o $(obj)/Image $(obj)/loader.lds FORCE + $(Q)$(LD) -T $(obj)/loader.lds -o $@ $(obj)/loader.o + +$(obj)/Image.bz2: $(obj)/Image FORCE + $(call if_changed,bzip2) + +$(obj)/Image.lz4: $(obj)/Image FORCE + $(call if_changed,lz4) + +$(obj)/Image.lzma: $(obj)/Image FORCE + $(call if_changed,lzma) + +$(obj)/Image.lzo: $(obj)/Image FORCE + $(call if_changed,lzo) + install: $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ $(obj)/Image System.map "$(INSTALL_PATH)" diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi index afa43c7ea369..70a1891e7cd0 100644 --- a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi +++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi @@ -162,6 +162,13 @@ clocks = <&prci PRCI_CLK_TLCLK>; status = "disabled"; }; + dma: dma@3000000 { + compatible = "sifive,fu540-c000-pdma"; + reg = <0x0 0x3000000 0x0 0x8000>; + interrupt-parent = <&plic0>; + interrupts = <23 24 25 26 27 28 29 30>; + #dma-cells = <1>; + }; uart1: serial@10011000 { compatible = "sifive,fu540-c000-uart", "sifive,uart0"; reg = <0x0 0x10011000 0x0 0x1000>; diff --git a/arch/riscv/boot/loader.S b/arch/riscv/boot/loader.S new file mode 100644 index 000000000000..dcf88cf44dc1 --- /dev/null +++ b/arch/riscv/boot/loader.S @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + + .align 4 + .section .payload, "ax", %progbits + .globl _start +_start: + .incbin "arch/riscv/boot/Image" + diff --git a/arch/riscv/boot/loader.lds.S b/arch/riscv/boot/loader.lds.S new file mode 100644 index 000000000000..47a5003c2e28 --- /dev/null +++ b/arch/riscv/boot/loader.lds.S @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#include <asm/page.h> + +OUTPUT_ARCH(riscv) +ENTRY(_start) + +SECTIONS +{ + . = PAGE_OFFSET; + + .payload : { + *(.payload) + . = ALIGN(8); + } +} diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig index 420a0dbef386..e2ff95cb3390 100644 --- a/arch/riscv/configs/defconfig +++ b/arch/riscv/configs/defconfig @@ -100,4 +100,28 @@ CONFIG_9P_FS=y CONFIG_CRYPTO_USER_API_HASH=y CONFIG_CRYPTO_DEV_VIRTIO=y CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_PAGEALLOC=y +CONFIG_DEBUG_VM=y +CONFIG_DEBUG_VM_PGFLAGS=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_DEBUG_PER_CPU_MAPS=y +CONFIG_SOFTLOCKUP_DETECTOR=y +CONFIG_WQ_WATCHDOG=y +CONFIG_SCHED_STACK_END_CHECK=y +CONFIG_DEBUG_TIMEKEEPING=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_RWSEMS=y +CONFIG_DEBUG_ATOMIC_SLEEP=y +CONFIG_STACKTRACE=y +CONFIG_DEBUG_LIST=y +CONFIG_DEBUG_PLIST=y +CONFIG_DEBUG_SG=y # CONFIG_RCU_TRACE is not set +CONFIG_RCU_EQS_DEBUG=y +CONFIG_DEBUG_BLOCK_EXT_DEVT=y +# CONFIG_FTRACE is not set +# CONFIG_RUNTIME_TESTING_MENU is not set +CONFIG_MEMTEST=y diff --git a/arch/riscv/configs/nommu_virt_defconfig b/arch/riscv/configs/nommu_virt_defconfig new file mode 100644 index 000000000000..cf74e179bf90 --- /dev/null +++ b/arch/riscv/configs/nommu_virt_defconfig @@ -0,0 +1,78 @@ +# CONFIG_CPU_ISOLATION is not set +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=12 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_RD_XZ is not set +# CONFIG_RD_LZO is not set +# CONFIG_RD_LZ4 is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_EXPERT=y +# CONFIG_SYSFS_SYSCALL is not set +# CONFIG_FHANDLE is not set +# CONFIG_BASE_FULL is not set +# CONFIG_EPOLL is not set +# CONFIG_SIGNALFD is not set +# CONFIG_TIMERFD is not set +# CONFIG_EVENTFD is not set +# CONFIG_AIO is not set +# CONFIG_IO_URING is not set +# CONFIG_ADVISE_SYSCALLS is not set +# CONFIG_MEMBARRIER is not set +# CONFIG_KALLSYMS is not set +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_SLOB=y +# CONFIG_SLAB_MERGE_DEFAULT is not set +# CONFIG_MMU is not set +CONFIG_MAXPHYSMEM_2GB=y +CONFIG_SMP=y +CONFIG_CMDLINE="root=/dev/vda rw earlycon=uart8250,mmio,0x10000000,115200n8 console=ttyS0" +CONFIG_CMDLINE_FORCE=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_MQ_IOSCHED_DEADLINE is not set +# CONFIG_MQ_IOSCHED_KYBER is not set +CONFIG_BINFMT_FLAT=y +# CONFIG_COREDUMP is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_FW_LOADER is not set +# CONFIG_ALLOW_DEV_COREDUMP is not set +CONFIG_VIRTIO_BLK=y +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_LDISC_AUTOLOAD is not set +# CONFIG_DEVMEM is not set +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_LCD_CLASS_DEVICE is not set +# CONFIG_BACKLIGHT_CLASS_DEVICE is not set +# CONFIG_VGA_CONSOLE is not set +# CONFIG_HID is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_VIRTIO_MMIO=y +CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y +CONFIG_SIFIVE_PLIC=y +# CONFIG_VALIDATE_FS_PARSER is not set +CONFIG_EXT2_FS=y +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY_USER is not set +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_LSM="[]" +CONFIG_PRINTK_TIME=y +# CONFIG_SCHED_DEBUG is not set +# CONFIG_RCU_TRACE is not set +# CONFIG_FTRACE is not set +# CONFIG_RUNTIME_TESTING_MENU is not set diff --git a/arch/riscv/configs/rv32_defconfig b/arch/riscv/configs/rv32_defconfig index 87ee6e62b64b..eb519407c841 100644 --- a/arch/riscv/configs/rv32_defconfig +++ b/arch/riscv/configs/rv32_defconfig @@ -97,4 +97,28 @@ CONFIG_9P_FS=y CONFIG_CRYPTO_USER_API_HASH=y CONFIG_CRYPTO_DEV_VIRTIO=y CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_PAGEALLOC=y +CONFIG_DEBUG_VM=y +CONFIG_DEBUG_VM_PGFLAGS=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_DEBUG_PER_CPU_MAPS=y +CONFIG_SOFTLOCKUP_DETECTOR=y +CONFIG_WQ_WATCHDOG=y +CONFIG_SCHED_STACK_END_CHECK=y +CONFIG_DEBUG_TIMEKEEPING=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_RWSEMS=y +CONFIG_DEBUG_ATOMIC_SLEEP=y +CONFIG_STACKTRACE=y +CONFIG_DEBUG_LIST=y +CONFIG_DEBUG_PLIST=y +CONFIG_DEBUG_SG=y # CONFIG_RCU_TRACE is not set +CONFIG_RCU_EQS_DEBUG=y +CONFIG_DEBUG_BLOCK_EXT_DEVT=y +# CONFIG_FTRACE is not set +# CONFIG_RUNTIME_TESTING_MENU is not set +CONFIG_MEMTEST=y diff --git a/arch/riscv/include/asm/Kbuild b/arch/riscv/include/asm/Kbuild index 16970f246860..1efaeddf1e4b 100644 --- a/arch/riscv/include/asm/Kbuild +++ b/arch/riscv/include/asm/Kbuild @@ -22,7 +22,6 @@ generic-y += kvm_para.h generic-y += local.h generic-y += local64.h generic-y += mm-arch-hooks.h -generic-y += msi.h generic-y += percpu.h generic-y += preempt.h generic-y += sections.h diff --git a/arch/riscv/include/asm/asm-prototypes.h b/arch/riscv/include/asm/asm-prototypes.h index c9fecd120d18..dd62b691c443 100644 --- a/arch/riscv/include/asm/asm-prototypes.h +++ b/arch/riscv/include/asm/asm-prototypes.h @@ -1,5 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0 */ #ifndef _ASM_RISCV_PROTOTYPES_H +#define _ASM_RISCV_PROTOTYPES_H #include <linux/ftrace.h> #include <asm-generic/asm-prototypes.h> diff --git a/arch/riscv/include/asm/cache.h b/arch/riscv/include/asm/cache.h index bfd523e8f0b2..9b58b104559e 100644 --- a/arch/riscv/include/asm/cache.h +++ b/arch/riscv/include/asm/cache.h @@ -11,4 +11,12 @@ #define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) +/* + * RISC-V requires the stack pointer to be 16-byte aligned, so ensure that + * the flat loader aligns it accordingly. + */ +#ifndef CONFIG_MMU +#define ARCH_SLAB_MINALIGN 16 +#endif + #endif /* _ASM_RISCV_CACHE_H */ diff --git a/arch/riscv/include/asm/clint.h b/arch/riscv/include/asm/clint.h new file mode 100644 index 000000000000..6eaa2eedd694 --- /dev/null +++ b/arch/riscv/include/asm/clint.h @@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_RISCV_CLINT_H +#define _ASM_RISCV_CLINT_H 1 + +#include <linux/io.h> +#include <linux/smp.h> + +#ifdef CONFIG_RISCV_M_MODE +extern u32 __iomem *clint_ipi_base; + +void clint_init_boot_cpu(void); + +static inline void clint_send_ipi_single(unsigned long hartid) +{ + writel(1, clint_ipi_base + hartid); +} + +static inline void clint_send_ipi_mask(const struct cpumask *hartid_mask) +{ + int hartid; + + for_each_cpu(hartid, hartid_mask) + clint_send_ipi_single(hartid); +} + +static inline void clint_clear_ipi(unsigned long hartid) +{ + writel(0, clint_ipi_base + hartid); +} +#else /* CONFIG_RISCV_M_MODE */ +#define clint_init_boot_cpu() do { } while (0) + +/* stubs to for code is only reachable under IS_ENABLED(CONFIG_RISCV_M_MODE): */ +void clint_send_ipi_single(unsigned long hartid); +void clint_send_ipi_mask(const struct cpumask *hartid_mask); +void clint_clear_ipi(unsigned long hartid); +#endif /* CONFIG_RISCV_M_MODE */ + +#endif /* _ASM_RISCV_CLINT_H */ diff --git a/arch/riscv/include/asm/csr.h b/arch/riscv/include/asm/csr.h index a18923fa23c8..0a62d2d68455 100644 --- a/arch/riscv/include/asm/csr.h +++ b/arch/riscv/include/asm/csr.h @@ -11,8 +11,11 @@ /* Status register flags */ #define SR_SIE _AC(0x00000002, UL) /* Supervisor Interrupt Enable */ +#define SR_MIE _AC(0x00000008, UL) /* Machine Interrupt Enable */ #define SR_SPIE _AC(0x00000020, UL) /* Previous Supervisor IE */ +#define SR_MPIE _AC(0x00000080, UL) /* Previous Machine IE */ #define SR_SPP _AC(0x00000100, UL) /* Previously Supervisor */ +#define SR_MPP _AC(0x00001800, UL) /* Previously Machine */ #define SR_SUM _AC(0x00040000, UL) /* Supervisor User Memory Access */ #define SR_FS _AC(0x00006000, UL) /* Floating-point Status */ @@ -44,9 +47,10 @@ #define SATP_MODE SATP_MODE_39 #endif -/* SCAUSE */ -#define SCAUSE_IRQ_FLAG (_AC(1, UL) << (__riscv_xlen - 1)) +/* Exception cause high bit - is an interrupt if set */ +#define CAUSE_IRQ_FLAG (_AC(1, UL) << (__riscv_xlen - 1)) +/* Interrupt causes (minus the high bit) */ #define IRQ_U_SOFT 0 #define IRQ_S_SOFT 1 #define IRQ_M_SOFT 3 @@ -57,6 +61,7 @@ #define IRQ_S_EXT 9 #define IRQ_M_EXT 11 +/* Exception causes */ #define EXC_INST_MISALIGNED 0 #define EXC_INST_ACCESS 1 #define EXC_BREAKPOINT 3 @@ -67,14 +72,14 @@ #define EXC_LOAD_PAGE_FAULT 13 #define EXC_STORE_PAGE_FAULT 15 -/* SIE (Interrupt Enable) and SIP (Interrupt Pending) flags */ -#define SIE_SSIE (_AC(0x1, UL) << IRQ_S_SOFT) -#define SIE_STIE (_AC(0x1, UL) << IRQ_S_TIMER) -#define SIE_SEIE (_AC(0x1, UL) << IRQ_S_EXT) - +/* symbolic CSR names: */ #define CSR_CYCLE 0xc00 #define CSR_TIME 0xc01 #define CSR_INSTRET 0xc02 +#define CSR_CYCLEH 0xc80 +#define CSR_TIMEH 0xc81 +#define CSR_INSTRETH 0xc82 + #define CSR_SSTATUS 0x100 #define CSR_SIE 0x104 #define CSR_STVEC 0x105 @@ -85,9 +90,58 @@ #define CSR_STVAL 0x143 #define CSR_SIP 0x144 #define CSR_SATP 0x180 -#define CSR_CYCLEH 0xc80 -#define CSR_TIMEH 0xc81 -#define CSR_INSTRETH 0xc82 + +#define CSR_MSTATUS 0x300 +#define CSR_MISA 0x301 +#define CSR_MIE 0x304 +#define CSR_MTVEC 0x305 +#define CSR_MSCRATCH 0x340 +#define CSR_MEPC 0x341 +#define CSR_MCAUSE 0x342 +#define CSR_MTVAL 0x343 +#define CSR_MIP 0x344 +#define CSR_MHARTID 0xf14 + +#ifdef CONFIG_RISCV_M_MODE +# define CSR_STATUS CSR_MSTATUS +# define CSR_IE CSR_MIE +# define CSR_TVEC CSR_MTVEC +# define CSR_SCRATCH CSR_MSCRATCH +# define CSR_EPC CSR_MEPC +# define CSR_CAUSE CSR_MCAUSE +# define CSR_TVAL CSR_MTVAL +# define CSR_IP CSR_MIP + +# define SR_IE SR_MIE +# define SR_PIE SR_MPIE +# define SR_PP SR_MPP + +# define IRQ_SOFT IRQ_M_SOFT +# define IRQ_TIMER IRQ_M_TIMER +# define IRQ_EXT IRQ_M_EXT +#else /* CONFIG_RISCV_M_MODE */ +# define CSR_STATUS CSR_SSTATUS +# define CSR_IE CSR_SIE +# define CSR_TVEC CSR_STVEC +# define CSR_SCRATCH CSR_SSCRATCH +# define CSR_EPC CSR_SEPC +# define CSR_CAUSE CSR_SCAUSE +# define CSR_TVAL CSR_STVAL +# define CSR_IP CSR_SIP + +# define SR_IE SR_SIE +# define SR_PIE SR_SPIE +# define SR_PP SR_SPP + +# define IRQ_SOFT IRQ_S_SOFT +# define IRQ_TIMER IRQ_S_TIMER +# define IRQ_EXT IRQ_S_EXT +#endif /* CONFIG_RISCV_M_MODE */ + +/* IE/IP (Supervisor/Machine Interrupt Enable/Pending) flags */ +#define IE_SIE (_AC(0x1, UL) << IRQ_SOFT) +#define IE_TIE (_AC(0x1, UL) << IRQ_TIMER) +#define IE_EIE (_AC(0x1, UL) << IRQ_EXT) #ifndef __ASSEMBLY__ diff --git a/arch/riscv/include/asm/current.h b/arch/riscv/include/asm/current.h index 44dcf7fc15ee..dd973efe5d7c 100644 --- a/arch/riscv/include/asm/current.h +++ b/arch/riscv/include/asm/current.h @@ -7,8 +7,8 @@ */ -#ifndef __ASM_CURRENT_H -#define __ASM_CURRENT_H +#ifndef _ASM_RISCV_CURRENT_H +#define _ASM_RISCV_CURRENT_H #include <linux/bug.h> #include <linux/compiler.h> @@ -34,4 +34,4 @@ static __always_inline struct task_struct *get_current(void) #endif /* __ASSEMBLY__ */ -#endif /* __ASM_CURRENT_H */ +#endif /* _ASM_RISCV_CURRENT_H */ diff --git a/arch/riscv/include/asm/elf.h b/arch/riscv/include/asm/elf.h index ef04084bf0de..d83a4efd052b 100644 --- a/arch/riscv/include/asm/elf.h +++ b/arch/riscv/include/asm/elf.h @@ -56,16 +56,16 @@ extern unsigned long elf_hwcap; */ #define ELF_PLATFORM (NULL) +#ifdef CONFIG_MMU #define ARCH_DLINFO \ do { \ NEW_AUX_ENT(AT_SYSINFO_EHDR, \ (elf_addr_t)current->mm->context.vdso); \ } while (0) - - #define ARCH_HAS_SETUP_ADDITIONAL_PAGES struct linux_binprm; extern int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp); +#endif /* CONFIG_MMU */ #endif /* _ASM_RISCV_ELF_H */ diff --git a/arch/riscv/include/asm/fixmap.h b/arch/riscv/include/asm/fixmap.h index 161f28d04a07..42d2c42f3cc9 100644 --- a/arch/riscv/include/asm/fixmap.h +++ b/arch/riscv/include/asm/fixmap.h @@ -11,6 +11,7 @@ #include <asm/page.h> #include <asm/pgtable.h> +#ifdef CONFIG_MMU /* * Here we define all the compile-time 'special' virtual addresses. * The point is to have a constant address at compile time, but to @@ -42,4 +43,5 @@ extern void __set_fixmap(enum fixed_addresses idx, #include <asm-generic/fixmap.h> +#endif /* CONFIG_MMU */ #endif /* _ASM_RISCV_FIXMAP_H */ diff --git a/arch/riscv/include/asm/ftrace.h b/arch/riscv/include/asm/ftrace.h index c6dcc5291f97..ace8a6e2d11d 100644 --- a/arch/riscv/include/asm/ftrace.h +++ b/arch/riscv/include/asm/ftrace.h @@ -1,6 +1,9 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* Copyright (C) 2017 Andes Technology Corporation */ +#ifndef _ASM_RISCV_FTRACE_H +#define _ASM_RISCV_FTRACE_H + /* * The graph frame test is not possible if CONFIG_FRAME_POINTER is not enabled. * Check arch/riscv/kernel/mcount.S for detail. @@ -64,3 +67,5 @@ do { \ */ #define MCOUNT_INSN_SIZE 8 #endif + +#endif /* _ASM_RISCV_FTRACE_H */ diff --git a/arch/riscv/include/asm/futex.h b/arch/riscv/include/asm/futex.h index 4ad6409c4647..fdfaf7f3df7c 100644 --- a/arch/riscv/include/asm/futex.h +++ b/arch/riscv/include/asm/futex.h @@ -4,14 +4,20 @@ * Copyright (c) 2018 Jim Wilson (jimw@sifive.com) */ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H +#ifndef _ASM_RISCV_FUTEX_H +#define _ASM_RISCV_FUTEX_H #include <linux/futex.h> #include <linux/uaccess.h> #include <linux/errno.h> #include <asm/asm.h> +/* We don't even really need the extable code, but for now keep it simple */ +#ifndef CONFIG_MMU +#define __enable_user_access() do { } while (0) +#define __disable_user_access() do { } while (0) +#endif + #define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ { \ uintptr_t tmp; \ @@ -112,4 +118,4 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, return ret; } -#endif /* _ASM_FUTEX_H */ +#endif /* _ASM_RISCV_FUTEX_H */ diff --git a/arch/riscv/include/asm/hwcap.h b/arch/riscv/include/asm/hwcap.h index 7ecb7c6a57b1..1bb0cd04aec3 100644 --- a/arch/riscv/include/asm/hwcap.h +++ b/arch/riscv/include/asm/hwcap.h @@ -5,8 +5,8 @@ * Copyright (C) 2012 ARM Ltd. * Copyright (C) 2017 SiFive */ -#ifndef __ASM_HWCAP_H -#define __ASM_HWCAP_H +#ifndef _ASM_RISCV_HWCAP_H +#define _ASM_RISCV_HWCAP_H #include <uapi/asm/hwcap.h> @@ -23,4 +23,5 @@ enum { extern unsigned long elf_hwcap; #endif -#endif + +#endif /* _ASM_RISCV_HWCAP_H */ diff --git a/arch/riscv/include/asm/image.h b/arch/riscv/include/asm/image.h index 344db5244547..7b0f92ba0acc 100644 --- a/arch/riscv/include/asm/image.h +++ b/arch/riscv/include/asm/image.h @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_IMAGE_H -#define __ASM_IMAGE_H +#ifndef _ASM_RISCV_IMAGE_H +#define _ASM_RISCV_IMAGE_H #define RISCV_IMAGE_MAGIC "RISCV\0\0\0" #define RISCV_IMAGE_MAGIC2 "RSC\x05" @@ -62,4 +62,4 @@ struct riscv_image_header { u32 res4; }; #endif /* __ASSEMBLY__ */ -#endif /* __ASM_IMAGE_H */ +#endif /* _ASM_RISCV_IMAGE_H */ diff --git a/arch/riscv/include/asm/io.h b/arch/riscv/include/asm/io.h index 3ba4d93721d3..0f477206a4ed 100644 --- a/arch/riscv/include/asm/io.h +++ b/arch/riscv/include/asm/io.h @@ -15,158 +15,19 @@ #include <asm/mmiowb.h> #include <asm/pgtable.h> -extern void __iomem *ioremap(phys_addr_t offset, unsigned long size); - -/* - * The RISC-V ISA doesn't yet specify how to query or modify PMAs, so we can't - * change the properties of memory regions. This should be fixed by the - * upcoming platform spec. - */ -#define ioremap_nocache(addr, size) ioremap((addr), (size)) -#define ioremap_wc(addr, size) ioremap((addr), (size)) -#define ioremap_wt(addr, size) ioremap((addr), (size)) - -extern void iounmap(volatile void __iomem *addr); - -/* Generic IO read/write. These perform native-endian accesses. */ -#define __raw_writeb __raw_writeb -static inline void __raw_writeb(u8 val, volatile void __iomem *addr) -{ - asm volatile("sb %0, 0(%1)" : : "r" (val), "r" (addr)); -} - -#define __raw_writew __raw_writew -static inline void __raw_writew(u16 val, volatile void __iomem *addr) -{ - asm volatile("sh %0, 0(%1)" : : "r" (val), "r" (addr)); -} - -#define __raw_writel __raw_writel -static inline void __raw_writel(u32 val, volatile void __iomem *addr) -{ - asm volatile("sw %0, 0(%1)" : : "r" (val), "r" (addr)); -} - -#ifdef CONFIG_64BIT -#define __raw_writeq __raw_writeq -static inline void __raw_writeq(u64 val, volatile void __iomem *addr) -{ - asm volatile("sd %0, 0(%1)" : : "r" (val), "r" (addr)); -} -#endif - -#define __raw_readb __raw_readb -static inline u8 __raw_readb(const volatile void __iomem *addr) -{ - u8 val; - - asm volatile("lb %0, 0(%1)" : "=r" (val) : "r" (addr)); - return val; -} - -#define __raw_readw __raw_readw -static inline u16 __raw_readw(const volatile void __iomem *addr) -{ - u16 val; - - asm volatile("lh %0, 0(%1)" : "=r" (val) : "r" (addr)); - return val; -} - -#define __raw_readl __raw_readl -static inline u32 __raw_readl(const volatile void __iomem *addr) -{ - u32 val; - - asm volatile("lw %0, 0(%1)" : "=r" (val) : "r" (addr)); - return val; -} - -#ifdef CONFIG_64BIT -#define __raw_readq __raw_readq -static inline u64 __raw_readq(const volatile void __iomem *addr) -{ - u64 val; - - asm volatile("ld %0, 0(%1)" : "=r" (val) : "r" (addr)); - return val; -} -#endif - /* - * Unordered I/O memory access primitives. These are even more relaxed than - * the relaxed versions, as they don't even order accesses between successive - * operations to the I/O regions. + * MMIO access functions are separated out to break dependency cycles + * when using {read,write}* fns in low-level headers */ -#define readb_cpu(c) ({ u8 __r = __raw_readb(c); __r; }) -#define readw_cpu(c) ({ u16 __r = le16_to_cpu((__force __le16)__raw_readw(c)); __r; }) -#define readl_cpu(c) ({ u32 __r = le32_to_cpu((__force __le32)__raw_readl(c)); __r; }) - -#define writeb_cpu(v,c) ((void)__raw_writeb((v),(c))) -#define writew_cpu(v,c) ((void)__raw_writew((__force u16)cpu_to_le16(v),(c))) -#define writel_cpu(v,c) ((void)__raw_writel((__force u32)cpu_to_le32(v),(c))) - -#ifdef CONFIG_64BIT -#define readq_cpu(c) ({ u64 __r = le64_to_cpu((__force __le64)__raw_readq(c)); __r; }) -#define writeq_cpu(v,c) ((void)__raw_writeq((__force u64)cpu_to_le64(v),(c))) -#endif - -/* - * Relaxed I/O memory access primitives. These follow the Device memory - * ordering rules but do not guarantee any ordering relative to Normal memory - * accesses. These are defined to order the indicated access (either a read or - * write) with all other I/O memory accesses. Since the platform specification - * defines that all I/O regions are strongly ordered on channel 2, no explicit - * fences are required to enforce this ordering. - */ -/* FIXME: These are now the same as asm-generic */ -#define __io_rbr() do {} while (0) -#define __io_rar() do {} while (0) -#define __io_rbw() do {} while (0) -#define __io_raw() do {} while (0) - -#define readb_relaxed(c) ({ u8 __v; __io_rbr(); __v = readb_cpu(c); __io_rar(); __v; }) -#define readw_relaxed(c) ({ u16 __v; __io_rbr(); __v = readw_cpu(c); __io_rar(); __v; }) -#define readl_relaxed(c) ({ u32 __v; __io_rbr(); __v = readl_cpu(c); __io_rar(); __v; }) - -#define writeb_relaxed(v,c) ({ __io_rbw(); writeb_cpu((v),(c)); __io_raw(); }) -#define writew_relaxed(v,c) ({ __io_rbw(); writew_cpu((v),(c)); __io_raw(); }) -#define writel_relaxed(v,c) ({ __io_rbw(); writel_cpu((v),(c)); __io_raw(); }) - -#ifdef CONFIG_64BIT -#define readq_relaxed(c) ({ u64 __v; __io_rbr(); __v = readq_cpu(c); __io_rar(); __v; }) -#define writeq_relaxed(v,c) ({ __io_rbw(); writeq_cpu((v),(c)); __io_raw(); }) -#endif - -/* - * I/O memory access primitives. Reads are ordered relative to any - * following Normal memory access. Writes are ordered relative to any prior - * Normal memory access. The memory barriers here are necessary as RISC-V - * doesn't define any ordering between the memory space and the I/O space. - */ -#define __io_br() do {} while (0) -#define __io_ar(v) __asm__ __volatile__ ("fence i,r" : : : "memory"); -#define __io_bw() __asm__ __volatile__ ("fence w,o" : : : "memory"); -#define __io_aw() mmiowb_set_pending() - -#define readb(c) ({ u8 __v; __io_br(); __v = readb_cpu(c); __io_ar(__v); __v; }) -#define readw(c) ({ u16 __v; __io_br(); __v = readw_cpu(c); __io_ar(__v); __v; }) -#define readl(c) ({ u32 __v; __io_br(); __v = readl_cpu(c); __io_ar(__v); __v; }) - -#define writeb(v,c) ({ __io_bw(); writeb_cpu((v),(c)); __io_aw(); }) -#define writew(v,c) ({ __io_bw(); writew_cpu((v),(c)); __io_aw(); }) -#define writel(v,c) ({ __io_bw(); writel_cpu((v),(c)); __io_aw(); }) - -#ifdef CONFIG_64BIT -#define readq(c) ({ u64 __v; __io_br(); __v = readq_cpu(c); __io_ar(__v); __v; }) -#define writeq(v,c) ({ __io_bw(); writeq_cpu((v),(c)); __io_aw(); }) -#endif +#include <asm/mmio.h> /* * I/O port access constants. */ +#ifdef CONFIG_MMU #define IO_SPACE_LIMIT (PCI_IO_SIZE - 1) #define PCI_IOBASE ((void __iomem *)PCI_IO_START) +#endif /* CONFIG_MMU */ /* * Emulation routines for the port-mapped IO space used by some PCI drivers. diff --git a/arch/riscv/include/asm/irqflags.h b/arch/riscv/include/asm/irqflags.h index e70f647ce3b7..08d4d6a5b7e9 100644 --- a/arch/riscv/include/asm/irqflags.h +++ b/arch/riscv/include/asm/irqflags.h @@ -13,31 +13,31 @@ /* read interrupt enabled status */ static inline unsigned long arch_local_save_flags(void) { - return csr_read(CSR_SSTATUS); + return csr_read(CSR_STATUS); } /* unconditionally enable interrupts */ static inline void arch_local_irq_enable(void) { - csr_set(CSR_SSTATUS, SR_SIE); + csr_set(CSR_STATUS, SR_IE); } /* unconditionally disable interrupts */ static inline void arch_local_irq_disable(void) { - csr_clear(CSR_SSTATUS, SR_SIE); + csr_clear(CSR_STATUS, SR_IE); } /* get status and disable interrupts */ static inline unsigned long arch_local_irq_save(void) { - return csr_read_clear(CSR_SSTATUS, SR_SIE); + return csr_read_clear(CSR_STATUS, SR_IE); } /* test flags */ static inline int arch_irqs_disabled_flags(unsigned long flags) { - return !(flags & SR_SIE); + return !(flags & SR_IE); } /* test hardware interrupt enable bit */ @@ -49,7 +49,7 @@ static inline int arch_irqs_disabled(void) /* set interrupt enabled status */ static inline void arch_local_irq_restore(unsigned long flags) { - csr_set(CSR_SSTATUS, flags & SR_SIE); + csr_set(CSR_STATUS, flags & SR_IE); } #endif /* _ASM_RISCV_IRQFLAGS_H */ diff --git a/arch/riscv/include/asm/kprobes.h b/arch/riscv/include/asm/kprobes.h index 96e30ef637e8..56a98ea30731 100644 --- a/arch/riscv/include/asm/kprobes.h +++ b/arch/riscv/include/asm/kprobes.h @@ -6,9 +6,9 @@ * Copyright (C) 2017 SiFive */ -#ifndef _RISCV_KPROBES_H -#define _RISCV_KPROBES_H +#ifndef _ASM_RISCV_KPROBES_H +#define _ASM_RISCV_KPROBES_H #include <asm-generic/kprobes.h> -#endif /* _RISCV_KPROBES_H */ +#endif /* _ASM_RISCV_KPROBES_H */ diff --git a/arch/riscv/include/asm/mmio.h b/arch/riscv/include/asm/mmio.h new file mode 100644 index 000000000000..a2c809df2733 --- /dev/null +++ b/arch/riscv/include/asm/mmio.h @@ -0,0 +1,155 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * {read,write}{b,w,l,q} based on arch/arm64/include/asm/io.h + * which was based on arch/arm/include/io.h + * + * Copyright (C) 1996-2000 Russell King + * Copyright (C) 2012 ARM Ltd. + * Copyright (C) 2014 Regents of the University of California + */ + +#ifndef _ASM_RISCV_MMIO_H +#define _ASM_RISCV_MMIO_H + +#include <linux/types.h> +#include <asm/mmiowb.h> + +#ifndef CONFIG_MMU +#define pgprot_noncached(x) (x) +#endif /* CONFIG_MMU */ + +/* Generic IO read/write. These perform native-endian accesses. */ +#define __raw_writeb __raw_writeb +static inline void __raw_writeb(u8 val, volatile void __iomem *addr) +{ + asm volatile("sb %0, 0(%1)" : : "r" (val), "r" (addr)); +} + +#define __raw_writew __raw_writew +static inline void __raw_writew(u16 val, volatile void __iomem *addr) +{ + asm volatile("sh %0, 0(%1)" : : "r" (val), "r" (addr)); +} + +#define __raw_writel __raw_writel +static inline void __raw_writel(u32 val, volatile void __iomem *addr) +{ + asm volatile("sw %0, 0(%1)" : : "r" (val), "r" (addr)); +} + +#ifdef CONFIG_64BIT +#define __raw_writeq __raw_writeq +static inline void __raw_writeq(u64 val, volatile void __iomem *addr) +{ + asm volatile("sd %0, 0(%1)" : : "r" (val), "r" (addr)); +} +#endif + +#define __raw_readb __raw_readb +static inline u8 __raw_readb(const volatile void __iomem *addr) +{ + u8 val; + + asm volatile("lb %0, 0(%1)" : "=r" (val) : "r" (addr)); + return val; +} + +#define __raw_readw __raw_readw +static inline u16 __raw_readw(const volatile void __iomem *addr) +{ + u16 val; + + asm volatile("lh %0, 0(%1)" : "=r" (val) : "r" (addr)); + return val; +} + +#define __raw_readl __raw_readl +static inline u32 __raw_readl(const volatile void __iomem *addr) +{ + u32 val; + + asm volatile("lw %0, 0(%1)" : "=r" (val) : "r" (addr)); + return val; +} + +#ifdef CONFIG_64BIT +#define __raw_readq __raw_readq +static inline u64 __raw_readq(const volatile void __iomem *addr) +{ + u64 val; + + asm volatile("ld %0, 0(%1)" : "=r" (val) : "r" (addr)); + return val; +} +#endif + +/* + * Unordered I/O memory access primitives. These are even more relaxed than + * the relaxed versions, as they don't even order accesses between successive + * operations to the I/O regions. + */ +#define readb_cpu(c) ({ u8 __r = __raw_readb(c); __r; }) +#define readw_cpu(c) ({ u16 __r = le16_to_cpu((__force __le16)__raw_readw(c)); __r; }) +#define readl_cpu(c) ({ u32 __r = le32_to_cpu((__force __le32)__raw_readl(c)); __r; }) + +#define writeb_cpu(v, c) ((void)__raw_writeb((v), (c))) +#define writew_cpu(v, c) ((void)__raw_writew((__force u16)cpu_to_le16(v), (c))) +#define writel_cpu(v, c) ((void)__raw_writel((__force u32)cpu_to_le32(v), (c))) + +#ifdef CONFIG_64BIT +#define readq_cpu(c) ({ u64 __r = le64_to_cpu((__force __le64)__raw_readq(c)); __r; }) +#define writeq_cpu(v, c) ((void)__raw_writeq((__force u64)cpu_to_le64(v), (c))) +#endif + +/* + * Relaxed I/O memory access primitives. These follow the Device memory + * ordering rules but do not guarantee any ordering relative to Normal memory + * accesses. These are defined to order the indicated access (either a read or + * write) with all other I/O memory accesses. Since the platform specification + * defines that all I/O regions are strongly ordered on channel 2, no explicit + * fences are required to enforce this ordering. + */ +/* FIXME: These are now the same as asm-generic */ +#define __io_rbr() do {} while (0) +#define __io_rar() do {} while (0) +#define __io_rbw() do {} while (0) +#define __io_raw() do {} while (0) + +#define readb_relaxed(c) ({ u8 __v; __io_rbr(); __v = readb_cpu(c); __io_rar(); __v; }) +#define readw_relaxed(c) ({ u16 __v; __io_rbr(); __v = readw_cpu(c); __io_rar(); __v; }) +#define readl_relaxed(c) ({ u32 __v; __io_rbr(); __v = readl_cpu(c); __io_rar(); __v; }) + +#define writeb_relaxed(v, c) ({ __io_rbw(); writeb_cpu((v), (c)); __io_raw(); }) +#define writew_relaxed(v, c) ({ __io_rbw(); writew_cpu((v), (c)); __io_raw(); }) +#define writel_relaxed(v, c) ({ __io_rbw(); writel_cpu((v), (c)); __io_raw(); }) + +#ifdef CONFIG_64BIT +#define readq_relaxed(c) ({ u64 __v; __io_rbr(); __v = readq_cpu(c); __io_rar(); __v; }) +#define writeq_relaxed(v, c) ({ __io_rbw(); writeq_cpu((v), (c)); __io_raw(); }) +#endif + +/* + * I/O memory access primitives. Reads are ordered relative to any + * following Normal memory access. Writes are ordered relative to any prior + * Normal memory access. The memory barriers here are necessary as RISC-V + * doesn't define any ordering between the memory space and the I/O space. + */ +#define __io_br() do {} while (0) +#define __io_ar(v) __asm__ __volatile__ ("fence i,r" : : : "memory") +#define __io_bw() __asm__ __volatile__ ("fence w,o" : : : "memory") +#define __io_aw() mmiowb_set_pending() + +#define readb(c) ({ u8 __v; __io_br(); __v = readb_cpu(c); __io_ar(__v); __v; }) +#define readw(c) ({ u16 __v; __io_br(); __v = readw_cpu(c); __io_ar(__v); __v; }) +#define readl(c) ({ u32 __v; __io_br(); __v = readl_cpu(c); __io_ar(__v); __v; }) + +#define writeb(v, c) ({ __io_bw(); writeb_cpu((v), (c)); __io_aw(); }) +#define writew(v, c) ({ __io_bw(); writew_cpu((v), (c)); __io_aw(); }) +#define writel(v, c) ({ __io_bw(); writel_cpu((v), (c)); __io_aw(); }) + +#ifdef CONFIG_64BIT +#define readq(c) ({ u64 __v; __io_br(); __v = readq_cpu(c); __io_ar(__v); __v; }) +#define writeq(v, c) ({ __io_bw(); writeq_cpu((v), (c)); __io_aw(); }) +#endif + +#endif /* _ASM_RISCV_MMIO_H */ diff --git a/arch/riscv/include/asm/mmiowb.h b/arch/riscv/include/asm/mmiowb.h index 5d7e3a2b4e3b..bb4091ff4a21 100644 --- a/arch/riscv/include/asm/mmiowb.h +++ b/arch/riscv/include/asm/mmiowb.h @@ -11,4 +11,4 @@ #include <asm-generic/mmiowb.h> -#endif /* ASM_RISCV_MMIOWB_H */ +#endif /* _ASM_RISCV_MMIOWB_H */ diff --git a/arch/riscv/include/asm/mmu.h b/arch/riscv/include/asm/mmu.h index 151476fb58cb..967eacb01ab5 100644 --- a/arch/riscv/include/asm/mmu.h +++ b/arch/riscv/include/asm/mmu.h @@ -10,6 +10,9 @@ #ifndef __ASSEMBLY__ typedef struct { +#ifndef CONFIG_MMU + unsigned long end_brk; +#endif void *vdso; #ifdef CONFIG_SMP /* A local icache flush is needed before user execution can resume. */ diff --git a/arch/riscv/include/asm/page.h b/arch/riscv/include/asm/page.h index 3db261c4810f..ac699246ae7e 100644 --- a/arch/riscv/include/asm/page.h +++ b/arch/riscv/include/asm/page.h @@ -88,8 +88,14 @@ typedef struct page *pgtable_t; #define PTE_FMT "%08lx" #endif +#ifdef CONFIG_MMU extern unsigned long va_pa_offset; extern unsigned long pfn_base; +#define ARCH_PFN_OFFSET (pfn_base) +#else +#define va_pa_offset 0 +#define ARCH_PFN_OFFSET (PAGE_OFFSET >> PAGE_SHIFT) +#endif /* CONFIG_MMU */ extern unsigned long max_low_pfn; extern unsigned long min_low_pfn; @@ -112,11 +118,9 @@ extern unsigned long min_low_pfn; #ifdef CONFIG_FLATMEM #define pfn_valid(pfn) \ - (((pfn) >= pfn_base) && (((pfn)-pfn_base) < max_mapnr)) + (((pfn) >= ARCH_PFN_OFFSET) && (((pfn) - ARCH_PFN_OFFSET) < max_mapnr)) #endif -#define ARCH_PFN_OFFSET (pfn_base) - #endif /* __ASSEMBLY__ */ #define virt_addr_valid(vaddr) (pfn_valid(virt_to_pfn(vaddr))) diff --git a/arch/riscv/include/asm/pci.h b/arch/riscv/include/asm/pci.h index 5ac8daa1cc36..1c473a1bd986 100644 --- a/arch/riscv/include/asm/pci.h +++ b/arch/riscv/include/asm/pci.h @@ -3,8 +3,8 @@ * Copyright (C) 2016 SiFive */ -#ifndef __ASM_RISCV_PCI_H -#define __ASM_RISCV_PCI_H +#ifndef _ASM_RISCV_PCI_H +#define _ASM_RISCV_PCI_H #include <linux/types.h> #include <linux/slab.h> @@ -34,4 +34,4 @@ static inline int pci_proc_domain(struct pci_bus *bus) } #endif /* CONFIG_PCI */ -#endif /* __ASM_PCI_H */ +#endif /* _ASM_RISCV_PCI_H */ diff --git a/arch/riscv/include/asm/pgalloc.h b/arch/riscv/include/asm/pgalloc.h index d59ea92285ec..3f601ee8233f 100644 --- a/arch/riscv/include/asm/pgalloc.h +++ b/arch/riscv/include/asm/pgalloc.h @@ -10,6 +10,7 @@ #include <linux/mm.h> #include <asm/tlb.h> +#ifdef CONFIG_MMU #include <asm-generic/pgalloc.h> /* for pte_{alloc,free}_one */ static inline void pmd_populate_kernel(struct mm_struct *mm, @@ -81,5 +82,6 @@ do { \ pgtable_pte_page_dtor(pte); \ tlb_remove_page((tlb), pte); \ } while (0) +#endif /* CONFIG_MMU */ #endif /* _ASM_RISCV_PGALLOC_H */ diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h index d3221017194d..7ff0ed4f292e 100644 --- a/arch/riscv/include/asm/pgtable.h +++ b/arch/riscv/include/asm/pgtable.h @@ -25,6 +25,7 @@ #include <asm/pgtable-32.h> #endif /* CONFIG_64BIT */ +#ifdef CONFIG_MMU /* Number of entries in the page global directory */ #define PTRS_PER_PGD (PAGE_SIZE / sizeof(pgd_t)) /* Number of entries in the page table */ @@ -32,7 +33,6 @@ /* Number of PGD entries that a user-mode program can use */ #define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) -#define FIRST_USER_ADDRESS 0 /* Page protection bits */ #define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_USER) @@ -62,6 +62,12 @@ #define PAGE_TABLE __pgprot(_PAGE_TABLE) +/* + * The RISC-V ISA doesn't yet specify how to query or modify PMAs, so we can't + * change the properties of memory regions. + */ +#define _PAGE_IOREMAP _PAGE_KERNEL + extern pgd_t swapper_pg_dir[]; /* MAP_PRIVATE permissions: xwr (copy-on-write) */ @@ -84,42 +90,6 @@ extern pgd_t swapper_pg_dir[]; #define __S110 PAGE_SHARED_EXEC #define __S111 PAGE_SHARED_EXEC -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1) -#define VMALLOC_END (PAGE_OFFSET - 1) -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE) -#define PCI_IO_SIZE SZ_16M - -/* - * Roughly size the vmemmap space to be large enough to fit enough - * struct pages to map half the virtual address space. Then - * position vmemmap directly below the VMALLOC region. - */ -#define VMEMMAP_SHIFT \ - (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT) -#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT) -#define VMEMMAP_END (VMALLOC_START - 1) -#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE) - -#define vmemmap ((struct page *)VMEMMAP_START) - -#define PCI_IO_END VMEMMAP_START -#define PCI_IO_START (PCI_IO_END - PCI_IO_SIZE) -#define FIXADDR_TOP PCI_IO_START - -#ifdef CONFIG_64BIT -#define FIXADDR_SIZE PMD_SIZE -#else -#define FIXADDR_SIZE PGDIR_SIZE -#endif -#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE) - -/* - * ZERO_PAGE is a global shared page that is always zero, - * used for zero-mapped memory areas, etc. - */ -extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; -#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) - static inline int pmd_present(pmd_t pmd) { return (pmd_val(pmd) & (_PAGE_PRESENT | _PAGE_PROT_NONE)); @@ -430,11 +400,34 @@ static inline int ptep_clear_flush_young(struct vm_area_struct *vma, #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) #define __swp_entry_to_pte(x) ((pte_t) { (x).val }) -#define kern_addr_valid(addr) (1) /* FIXME */ +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1) +#define VMALLOC_END (PAGE_OFFSET - 1) +#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE) -extern void *dtb_early_va; -extern void setup_bootmem(void); -extern void paging_init(void); +/* + * Roughly size the vmemmap space to be large enough to fit enough + * struct pages to map half the virtual address space. Then + * position vmemmap directly below the VMALLOC region. + */ +#define VMEMMAP_SHIFT \ + (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT) +#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT) +#define VMEMMAP_END (VMALLOC_START - 1) +#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE) + +#define vmemmap ((struct page *)VMEMMAP_START) + +#define PCI_IO_SIZE SZ_16M +#define PCI_IO_END VMEMMAP_START +#define PCI_IO_START (PCI_IO_END - PCI_IO_SIZE) + +#define FIXADDR_TOP PCI_IO_START +#ifdef CONFIG_64BIT +#define FIXADDR_SIZE PMD_SIZE +#else +#define FIXADDR_SIZE PGDIR_SIZE +#endif +#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE) /* * Task size is 0x4000000000 for RV64 or 0x9fc00000 for RV32. @@ -446,6 +439,31 @@ extern void paging_init(void); #define TASK_SIZE FIXADDR_START #endif +#else /* CONFIG_MMU */ + +#define PAGE_KERNEL __pgprot(0) +#define swapper_pg_dir NULL +#define VMALLOC_START 0 + +#define TASK_SIZE 0xffffffffUL + +#endif /* !CONFIG_MMU */ + +#define kern_addr_valid(addr) (1) /* FIXME */ + +extern void *dtb_early_va; +void setup_bootmem(void); +void paging_init(void); + +#define FIRST_USER_ADDRESS 0 + +/* + * ZERO_PAGE is a global shared page that is always zero, + * used for zero-mapped memory areas, etc. + */ +extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; +#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) + #include <asm-generic/pgtable.h> #endif /* !__ASSEMBLY__ */ diff --git a/arch/riscv/include/asm/processor.h b/arch/riscv/include/asm/processor.h index f539149d04c2..3ddb798264f1 100644 --- a/arch/riscv/include/asm/processor.h +++ b/arch/riscv/include/asm/processor.h @@ -42,7 +42,7 @@ struct thread_struct { ((struct pt_regs *)(task_stack_page(tsk) + THREAD_SIZE \ - ALIGN(sizeof(struct pt_regs), STACK_ALIGN))) -#define KSTK_EIP(tsk) (task_pt_regs(tsk)->sepc) +#define KSTK_EIP(tsk) (task_pt_regs(tsk)->epc) #define KSTK_ESP(tsk) (task_pt_regs(tsk)->sp) diff --git a/arch/riscv/include/asm/ptrace.h b/arch/riscv/include/asm/ptrace.h index d48d1e13973c..ee49f80c9533 100644 --- a/arch/riscv/include/asm/ptrace.h +++ b/arch/riscv/include/asm/ptrace.h @@ -12,7 +12,7 @@ #ifndef __ASSEMBLY__ struct pt_regs { - unsigned long sepc; + unsigned long epc; unsigned long ra; unsigned long sp; unsigned long gp; @@ -44,10 +44,10 @@ struct pt_regs { unsigned long t4; unsigned long t5; unsigned long t6; - /* Supervisor CSRs */ - unsigned long sstatus; - unsigned long sbadaddr; - unsigned long scause; + /* Supervisor/Machine CSRs */ + unsigned long status; + unsigned long badaddr; + unsigned long cause; /* a0 value before the syscall */ unsigned long orig_a0; }; @@ -58,18 +58,18 @@ struct pt_regs { #define REG_FMT "%08lx" #endif -#define user_mode(regs) (((regs)->sstatus & SR_SPP) == 0) +#define user_mode(regs) (((regs)->status & SR_PP) == 0) /* Helpers for working with the instruction pointer */ static inline unsigned long instruction_pointer(struct pt_regs *regs) { - return regs->sepc; + return regs->epc; } static inline void instruction_pointer_set(struct pt_regs *regs, unsigned long val) { - regs->sepc = val; + regs->epc = val; } #define profile_pc(regs) instruction_pointer(regs) diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h index 21134b3ef404..2570c1e683d3 100644 --- a/arch/riscv/include/asm/sbi.h +++ b/arch/riscv/include/asm/sbi.h @@ -8,6 +8,7 @@ #include <linux/types.h> +#ifdef CONFIG_RISCV_SBI #define SBI_SET_TIMER 0 #define SBI_CONSOLE_PUTCHAR 1 #define SBI_CONSOLE_GETCHAR 2 @@ -93,5 +94,11 @@ static inline void sbi_remote_sfence_vma_asid(const unsigned long *hart_mask, { SBI_CALL_4(SBI_REMOTE_SFENCE_VMA_ASID, hart_mask, start, size, asid); } - -#endif +#else /* CONFIG_RISCV_SBI */ +/* stubs for code that is only reachable under IS_ENABLED(CONFIG_RISCV_SBI): */ +void sbi_set_timer(uint64_t stime_value); +void sbi_clear_ipi(void); +void sbi_send_ipi(const unsigned long *hart_mask); +void sbi_remote_fence_i(const unsigned long *hart_mask); +#endif /* CONFIG_RISCV_SBI */ +#endif /* _ASM_RISCV_SBI_H */ diff --git a/arch/riscv/include/asm/seccomp.h b/arch/riscv/include/asm/seccomp.h new file mode 100644 index 000000000000..bf7744ee3b3d --- /dev/null +++ b/arch/riscv/include/asm/seccomp.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef _ASM_SECCOMP_H +#define _ASM_SECCOMP_H + +#include <asm/unistd.h> + +#include <asm-generic/seccomp.h> + +#endif /* _ASM_SECCOMP_H */ diff --git a/arch/riscv/include/asm/sparsemem.h b/arch/riscv/include/asm/sparsemem.h index b58ba2d9ed6e..45a7018a8118 100644 --- a/arch/riscv/include/asm/sparsemem.h +++ b/arch/riscv/include/asm/sparsemem.h @@ -1,11 +1,11 @@ /* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_SPARSEMEM_H -#define __ASM_SPARSEMEM_H +#ifndef _ASM_RISCV_SPARSEMEM_H +#define _ASM_RISCV_SPARSEMEM_H #ifdef CONFIG_SPARSEMEM #define MAX_PHYSMEM_BITS CONFIG_PA_BITS #define SECTION_SIZE_BITS 27 #endif /* CONFIG_SPARSEMEM */ -#endif /* __ASM_SPARSEMEM_H */ +#endif /* _ASM_RISCV_SPARSEMEM_H */ diff --git a/arch/riscv/include/asm/spinlock_types.h b/arch/riscv/include/asm/spinlock_types.h index 888cbf8e7111..f398e7638dd6 100644 --- a/arch/riscv/include/asm/spinlock_types.h +++ b/arch/riscv/include/asm/spinlock_types.h @@ -22,4 +22,4 @@ typedef struct { #define __ARCH_RW_LOCK_UNLOCKED { 0 } -#endif +#endif /* _ASM_RISCV_SPINLOCK_TYPES_H */ diff --git a/arch/riscv/include/asm/switch_to.h b/arch/riscv/include/asm/switch_to.h index ee4f0ac62c9d..407bcc96a710 100644 --- a/arch/riscv/include/asm/switch_to.h +++ b/arch/riscv/include/asm/switch_to.h @@ -17,19 +17,19 @@ extern void __fstate_restore(struct task_struct *restore_from); static inline void __fstate_clean(struct pt_regs *regs) { - regs->sstatus = (regs->sstatus & ~SR_FS) | SR_FS_CLEAN; + regs->status = (regs->status & ~SR_FS) | SR_FS_CLEAN; } static inline void fstate_off(struct task_struct *task, struct pt_regs *regs) { - regs->sstatus = (regs->sstatus & ~SR_FS) | SR_FS_OFF; + regs->status = (regs->status & ~SR_FS) | SR_FS_OFF; } static inline void fstate_save(struct task_struct *task, struct pt_regs *regs) { - if ((regs->sstatus & SR_FS) == SR_FS_DIRTY) { + if ((regs->status & SR_FS) == SR_FS_DIRTY) { __fstate_save(task); __fstate_clean(regs); } @@ -38,7 +38,7 @@ static inline void fstate_save(struct task_struct *task, static inline void fstate_restore(struct task_struct *task, struct pt_regs *regs) { - if ((regs->sstatus & SR_FS) != SR_FS_OFF) { + if ((regs->status & SR_FS) != SR_FS_OFF) { __fstate_restore(task); __fstate_clean(regs); } @@ -50,7 +50,7 @@ static inline void __switch_to_aux(struct task_struct *prev, struct pt_regs *regs; regs = task_pt_regs(prev); - if (unlikely(regs->sstatus & SR_SD)) + if (unlikely(regs->status & SR_SD)) fstate_save(prev, regs); fstate_restore(next, task_pt_regs(next)); } diff --git a/arch/riscv/include/asm/thread_info.h b/arch/riscv/include/asm/thread_info.h index 905372d7eeb8..1dd12a0cbb2b 100644 --- a/arch/riscv/include/asm/thread_info.h +++ b/arch/riscv/include/asm/thread_info.h @@ -75,6 +75,7 @@ struct thread_info { #define TIF_MEMDIE 5 /* is terminating due to OOM killer */ #define TIF_SYSCALL_TRACEPOINT 6 /* syscall tracepoint instrumentation */ #define TIF_SYSCALL_AUDIT 7 /* syscall auditing */ +#define TIF_SECCOMP 8 /* syscall secure computing */ #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) #define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) @@ -82,11 +83,13 @@ struct thread_info { #define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) #define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT) #define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) +#define _TIF_SECCOMP (1 << TIF_SECCOMP) #define _TIF_WORK_MASK \ (_TIF_NOTIFY_RESUME | _TIF_SIGPENDING | _TIF_NEED_RESCHED) #define _TIF_SYSCALL_WORK \ - (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_TRACEPOINT | _TIF_SYSCALL_AUDIT) + (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_TRACEPOINT | _TIF_SYSCALL_AUDIT | \ + _TIF_SECCOMP) #endif /* _ASM_RISCV_THREAD_INFO_H */ diff --git a/arch/riscv/include/asm/timex.h b/arch/riscv/include/asm/timex.h index c7ef131b9e4c..bad2a7c2cda5 100644 --- a/arch/riscv/include/asm/timex.h +++ b/arch/riscv/include/asm/timex.h @@ -7,12 +7,25 @@ #define _ASM_RISCV_TIMEX_H #include <asm/csr.h> +#include <asm/mmio.h> typedef unsigned long cycles_t; +extern u64 __iomem *riscv_time_val; +extern u64 __iomem *riscv_time_cmp; + +#ifdef CONFIG_64BIT +#define mmio_get_cycles() readq_relaxed(riscv_time_val) +#else +#define mmio_get_cycles() readl_relaxed(riscv_time_val) +#define mmio_get_cycles_hi() readl_relaxed(((u32 *)riscv_time_val) + 1) +#endif + static inline cycles_t get_cycles(void) { - return csr_read(CSR_TIME); + if (IS_ENABLED(CONFIG_RISCV_SBI)) + return csr_read(CSR_TIME); + return mmio_get_cycles(); } #define get_cycles get_cycles @@ -24,7 +37,9 @@ static inline u64 get_cycles64(void) #else /* CONFIG_64BIT */ static inline u32 get_cycles_hi(void) { - return csr_read(CSR_TIMEH); + if (IS_ENABLED(CONFIG_RISCV_SBI)) + return csr_read(CSR_TIMEH); + return mmio_get_cycles_hi(); } static inline u64 get_cycles64(void) diff --git a/arch/riscv/include/asm/tlbflush.h b/arch/riscv/include/asm/tlbflush.h index f02188a5b0f4..394cfbccdcd9 100644 --- a/arch/riscv/include/asm/tlbflush.h +++ b/arch/riscv/include/asm/tlbflush.h @@ -10,6 +10,7 @@ #include <linux/mm_types.h> #include <asm/smp.h> +#ifdef CONFIG_MMU static inline void local_flush_tlb_all(void) { __asm__ __volatile__ ("sfence.vma" : : : "memory"); @@ -20,14 +21,19 @@ static inline void local_flush_tlb_page(unsigned long addr) { __asm__ __volatile__ ("sfence.vma %0" : : "r" (addr) : "memory"); } +#else /* CONFIG_MMU */ +#define local_flush_tlb_all() do { } while (0) +#define local_flush_tlb_page(addr) do { } while (0) +#endif /* CONFIG_MMU */ -#ifdef CONFIG_SMP +#if defined(CONFIG_SMP) && defined(CONFIG_MMU) void flush_tlb_all(void); void flush_tlb_mm(struct mm_struct *mm); void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr); void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end); -#else /* CONFIG_SMP */ +#else /* CONFIG_SMP && CONFIG_MMU */ + #define flush_tlb_all() local_flush_tlb_all() #define flush_tlb_page(vma, addr) local_flush_tlb_page(addr) @@ -38,7 +44,7 @@ static inline void flush_tlb_range(struct vm_area_struct *vma, } #define flush_tlb_mm(mm) flush_tlb_all() -#endif /* CONFIG_SMP */ +#endif /* !CONFIG_SMP || !CONFIG_MMU */ /* Flush a range of kernel pages */ static inline void flush_tlb_kernel_range(unsigned long start, diff --git a/arch/riscv/include/asm/uaccess.h b/arch/riscv/include/asm/uaccess.h index e076437cfafe..f462a183a9c2 100644 --- a/arch/riscv/include/asm/uaccess.h +++ b/arch/riscv/include/asm/uaccess.h @@ -11,6 +11,7 @@ /* * User space memory access functions */ +#ifdef CONFIG_MMU #include <linux/errno.h> #include <linux/compiler.h> #include <linux/thread_info.h> @@ -475,4 +476,7 @@ unsigned long __must_check clear_user(void __user *to, unsigned long n) __ret; \ }) +#else /* CONFIG_MMU */ +#include <asm-generic/uaccess.h> +#endif /* CONFIG_MMU */ #endif /* _ASM_RISCV_UACCESS_H */ diff --git a/arch/riscv/include/uapi/asm/elf.h b/arch/riscv/include/uapi/asm/elf.h index 644a00ce6e2e..d696d6610231 100644 --- a/arch/riscv/include/uapi/asm/elf.h +++ b/arch/riscv/include/uapi/asm/elf.h @@ -9,8 +9,8 @@ * (at your option) any later version. */ -#ifndef _UAPI_ASM_ELF_H -#define _UAPI_ASM_ELF_H +#ifndef _UAPI_ASM_RISCV_ELF_H +#define _UAPI_ASM_RISCV_ELF_H #include <asm/ptrace.h> @@ -95,4 +95,4 @@ typedef union __riscv_fp_state elf_fpregset_t; #define R_RISCV_32_PCREL 57 -#endif /* _UAPI_ASM_ELF_H */ +#endif /* _UAPI_ASM_RISCV_ELF_H */ diff --git a/arch/riscv/include/uapi/asm/hwcap.h b/arch/riscv/include/uapi/asm/hwcap.h index 4e7646077056..dee98ee28318 100644 --- a/arch/riscv/include/uapi/asm/hwcap.h +++ b/arch/riscv/include/uapi/asm/hwcap.h @@ -5,8 +5,8 @@ * Copyright (C) 2012 ARM Ltd. * Copyright (C) 2017 SiFive */ -#ifndef __UAPI_ASM_HWCAP_H -#define __UAPI_ASM_HWCAP_H +#ifndef _UAPI_ASM_RISCV_HWCAP_H +#define _UAPI_ASM_RISCV_HWCAP_H /* * Linux saves the floating-point registers according to the ISA Linux is @@ -22,4 +22,4 @@ #define COMPAT_HWCAP_ISA_D (1 << ('D' - 'A')) #define COMPAT_HWCAP_ISA_C (1 << ('C' - 'A')) -#endif +#endif /* _UAPI_ASM_RISCV_HWCAP_H */ diff --git a/arch/riscv/include/uapi/asm/ucontext.h b/arch/riscv/include/uapi/asm/ucontext.h index 411dd7b52ed6..44eb993950e5 100644 --- a/arch/riscv/include/uapi/asm/ucontext.h +++ b/arch/riscv/include/uapi/asm/ucontext.h @@ -5,8 +5,8 @@ * * This file was copied from arch/arm64/include/uapi/asm/ucontext.h */ -#ifndef _UAPI__ASM_UCONTEXT_H -#define _UAPI__ASM_UCONTEXT_H +#ifndef _UAPI_ASM_RISCV_UCONTEXT_H +#define _UAPI_ASM_RISCV_UCONTEXT_H #include <linux/types.h> @@ -31,4 +31,4 @@ struct ucontext { struct sigcontext uc_mcontext; }; -#endif /* _UAPI__ASM_UCONTEXT_H */ +#endif /* _UAPI_ASM_RISCV_UCONTEXT_H */ diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile index 696020ff72db..f40205cb9a22 100644 --- a/arch/riscv/kernel/Makefile +++ b/arch/riscv/kernel/Makefile @@ -25,10 +25,10 @@ obj-y += time.o obj-y += traps.o obj-y += riscv_ksyms.o obj-y += stacktrace.o -obj-y += vdso.o obj-y += cacheinfo.o -obj-y += vdso/ +obj-$(CONFIG_MMU) += vdso.o vdso/ +obj-$(CONFIG_RISCV_M_MODE) += clint.o obj-$(CONFIG_FPU) += fpu.o obj-$(CONFIG_SMP) += smpboot.o obj-$(CONFIG_SMP) += smp.o @@ -41,5 +41,6 @@ obj-$(CONFIG_DYNAMIC_FTRACE) += mcount-dyn.o obj-$(CONFIG_PERF_EVENTS) += perf_event.o obj-$(CONFIG_PERF_EVENTS) += perf_callchain.o obj-$(CONFIG_HAVE_PERF_REGS) += perf_regs.o +obj-$(CONFIG_RISCV_SBI) += sbi.o clean: diff --git a/arch/riscv/kernel/asm-offsets.c b/arch/riscv/kernel/asm-offsets.c index 9f5628c38ac9..07cb9c10de4e 100644 --- a/arch/riscv/kernel/asm-offsets.c +++ b/arch/riscv/kernel/asm-offsets.c @@ -71,7 +71,7 @@ void asm_offsets(void) OFFSET(TASK_THREAD_FCSR, task_struct, thread.fstate.fcsr); DEFINE(PT_SIZE, sizeof(struct pt_regs)); - OFFSET(PT_SEPC, pt_regs, sepc); + OFFSET(PT_EPC, pt_regs, epc); OFFSET(PT_RA, pt_regs, ra); OFFSET(PT_FP, pt_regs, s0); OFFSET(PT_S0, pt_regs, s0); @@ -105,9 +105,9 @@ void asm_offsets(void) OFFSET(PT_T6, pt_regs, t6); OFFSET(PT_GP, pt_regs, gp); OFFSET(PT_ORIG_A0, pt_regs, orig_a0); - OFFSET(PT_SSTATUS, pt_regs, sstatus); - OFFSET(PT_SBADADDR, pt_regs, sbadaddr); - OFFSET(PT_SCAUSE, pt_regs, scause); + OFFSET(PT_STATUS, pt_regs, status); + OFFSET(PT_BADADDR, pt_regs, badaddr); + OFFSET(PT_CAUSE, pt_regs, cause); /* * THREAD_{F,X}* might be larger than a S-type offset can handle, but diff --git a/arch/riscv/kernel/clint.c b/arch/riscv/kernel/clint.c new file mode 100644 index 000000000000..3647980d14c3 --- /dev/null +++ b/arch/riscv/kernel/clint.c @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 Christoph Hellwig. + */ + +#include <linux/io.h> +#include <linux/of_address.h> +#include <linux/types.h> +#include <asm/clint.h> +#include <asm/csr.h> +#include <asm/timex.h> +#include <asm/smp.h> + +/* + * This is the layout used by the SiFive clint, which is also shared by the qemu + * virt platform, and the Kendryte KD210 at least. + */ +#define CLINT_IPI_OFF 0 +#define CLINT_TIME_CMP_OFF 0x4000 +#define CLINT_TIME_VAL_OFF 0xbff8 + +u32 __iomem *clint_ipi_base; + +void clint_init_boot_cpu(void) +{ + struct device_node *np; + void __iomem *base; + + np = of_find_compatible_node(NULL, NULL, "riscv,clint0"); + if (!np) { + panic("clint not found"); + return; + } + + base = of_iomap(np, 0); + if (!base) + panic("could not map CLINT"); + + clint_ipi_base = base + CLINT_IPI_OFF; + riscv_time_cmp = base + CLINT_TIME_CMP_OFF; + riscv_time_val = base + CLINT_TIME_VAL_OFF; + + clint_clear_ipi(boot_cpu_hartid); +} diff --git a/arch/riscv/kernel/cpu.c b/arch/riscv/kernel/cpu.c index 7da3c6a93abd..40a3c442ac5f 100644 --- a/arch/riscv/kernel/cpu.c +++ b/arch/riscv/kernel/cpu.c @@ -46,51 +46,12 @@ int riscv_of_processor_hartid(struct device_node *node) #ifdef CONFIG_PROC_FS -static void print_isa(struct seq_file *f, const char *orig_isa) +static void print_isa(struct seq_file *f, const char *isa) { - static const char *ext = "mafdcsu"; - const char *isa = orig_isa; - const char *e; - - /* - * Linux doesn't support rv32e or rv128i, and we only support booting - * kernels on harts with the same ISA that the kernel is compiled for. - */ -#if defined(CONFIG_32BIT) - if (strncmp(isa, "rv32i", 5) != 0) - return; -#elif defined(CONFIG_64BIT) - if (strncmp(isa, "rv64i", 5) != 0) - return; -#endif - - /* Print the base ISA, as we already know it's legal. */ + /* Print the entire ISA as it is */ seq_puts(f, "isa\t\t: "); - seq_write(f, isa, 5); - isa += 5; - - /* - * Check the rest of the ISA string for valid extensions, printing those - * we find. RISC-V ISA strings define an order, so we only print the - * extension bits when they're in order. Hide the supervisor (S) - * extension from userspace as it's not accessible from there. - */ - for (e = ext; *e != '\0'; ++e) { - if (isa[0] == e[0]) { - if (isa[0] != 's') - seq_write(f, isa, 1); - - isa++; - } - } + seq_write(f, isa, strlen(isa)); seq_puts(f, "\n"); - - /* - * If we were given an unsupported ISA in the device tree then print - * a bit of info describing what went wrong. - */ - if (isa[0] != '\0') - pr_info("unsupported ISA \"%s\" in device tree\n", orig_isa); } static void print_mmu(struct seq_file *f, const char *mmu_type) diff --git a/arch/riscv/kernel/entry.S b/arch/riscv/kernel/entry.S index 8ca479831142..a1349ca64669 100644 --- a/arch/riscv/kernel/entry.S +++ b/arch/riscv/kernel/entry.S @@ -26,14 +26,14 @@ /* * If coming from userspace, preserve the user thread pointer and load - * the kernel thread pointer. If we came from the kernel, sscratch - * will contain 0, and we should continue on the current TP. + * the kernel thread pointer. If we came from the kernel, the scratch + * register will contain 0, and we should continue on the current TP. */ - csrrw tp, CSR_SSCRATCH, tp + csrrw tp, CSR_SCRATCH, tp bnez tp, _save_context _restore_kernel_tpsp: - csrr tp, CSR_SSCRATCH + csrr tp, CSR_SCRATCH REG_S sp, TASK_TI_KERNEL_SP(tp) _save_context: REG_S sp, TASK_TI_USER_SP(tp) @@ -79,16 +79,16 @@ _save_context: li t0, SR_SUM | SR_FS REG_L s0, TASK_TI_USER_SP(tp) - csrrc s1, CSR_SSTATUS, t0 - csrr s2, CSR_SEPC - csrr s3, CSR_STVAL - csrr s4, CSR_SCAUSE - csrr s5, CSR_SSCRATCH + csrrc s1, CSR_STATUS, t0 + csrr s2, CSR_EPC + csrr s3, CSR_TVAL + csrr s4, CSR_CAUSE + csrr s5, CSR_SCRATCH REG_S s0, PT_SP(sp) - REG_S s1, PT_SSTATUS(sp) - REG_S s2, PT_SEPC(sp) - REG_S s3, PT_SBADADDR(sp) - REG_S s4, PT_SCAUSE(sp) + REG_S s1, PT_STATUS(sp) + REG_S s2, PT_EPC(sp) + REG_S s3, PT_BADADDR(sp) + REG_S s4, PT_CAUSE(sp) REG_S s5, PT_TP(sp) .endm @@ -97,7 +97,7 @@ _save_context: * registers from the stack. */ .macro RESTORE_ALL - REG_L a0, PT_SSTATUS(sp) + REG_L a0, PT_STATUS(sp) /* * The current load reservation is effectively part of the processor's * state, in the sense that load reservations cannot be shared between @@ -115,11 +115,11 @@ _save_context: * completes, implementations are allowed to expand reservations to be * arbitrarily large. */ - REG_L a2, PT_SEPC(sp) - REG_SC x0, a2, PT_SEPC(sp) + REG_L a2, PT_EPC(sp) + REG_SC x0, a2, PT_EPC(sp) - csrw CSR_SSTATUS, a0 - csrw CSR_SEPC, a2 + csrw CSR_STATUS, a0 + csrw CSR_EPC, a2 REG_L x1, PT_RA(sp) REG_L x3, PT_GP(sp) @@ -163,10 +163,10 @@ ENTRY(handle_exception) SAVE_ALL /* - * Set sscratch register to 0, so that if a recursive exception + * Set the scratch register to 0, so that if a recursive exception * occurs, the exception vector knows it came from the kernel */ - csrw CSR_SSCRATCH, x0 + csrw CSR_SCRATCH, x0 /* Load the global pointer */ .option push @@ -185,11 +185,13 @@ ENTRY(handle_exception) move a0, sp /* pt_regs */ tail do_IRQ 1: - /* Exceptions run with interrupts enabled or disabled - depending on the state of sstatus.SR_SPIE */ - andi t0, s1, SR_SPIE + /* + * Exceptions run with interrupts enabled or disabled depending on the + * state of SR_PIE in m/sstatus. + */ + andi t0, s1, SR_PIE beqz t0, 1f - csrs CSR_SSTATUS, SR_SIE + csrs CSR_STATUS, SR_IE 1: /* Handle syscalls */ @@ -217,7 +219,7 @@ handle_syscall: * scall instruction on sret */ addi s2, s2, 0x4 - REG_S s2, PT_SEPC(sp) + REG_S s2, PT_EPC(sp) /* Trace syscalls, but only if requested by the user. */ REG_L t0, TASK_TI_FLAGS(tp) andi t0, t0, _TIF_SYSCALL_WORK @@ -226,8 +228,25 @@ check_syscall_nr: /* Check to make sure we don't jump to a bogus syscall number. */ li t0, __NR_syscalls la s0, sys_ni_syscall - /* Syscall number held in a7 */ - bgeu a7, t0, 1f + /* + * The tracer can change syscall number to valid/invalid value. + * We use syscall_set_nr helper in syscall_trace_enter thus we + * cannot trust the current value in a7 and have to reload from + * the current task pt_regs. + */ + REG_L a7, PT_A7(sp) + /* + * Syscall number held in a7. + * If syscall number is above allowed value, redirect to ni_syscall. + */ + bge a7, t0, 1f + /* + * Check if syscall is rejected by tracer or seccomp, i.e., a7 == -1. + * If yes, we pretend it was executed. + */ + li t1, -1 + beq a7, t1, ret_from_syscall_rejected + /* Call syscall */ la s0, sys_call_table slli t0, a7, RISCV_LGPTR add s0, s0, t0 @@ -238,15 +257,27 @@ check_syscall_nr: ret_from_syscall: /* Set user a0 to kernel a0 */ REG_S a0, PT_A0(sp) + /* + * We didn't execute the actual syscall. + * Seccomp already set return value for the current task pt_regs. + * (If it was configured with SECCOMP_RET_ERRNO/TRACE) + */ +ret_from_syscall_rejected: /* Trace syscalls, but only if requested by the user. */ REG_L t0, TASK_TI_FLAGS(tp) andi t0, t0, _TIF_SYSCALL_WORK bnez t0, handle_syscall_trace_exit ret_from_exception: - REG_L s0, PT_SSTATUS(sp) - csrc CSR_SSTATUS, SR_SIE + REG_L s0, PT_STATUS(sp) + csrc CSR_STATUS, SR_IE +#ifdef CONFIG_RISCV_M_MODE + /* the MPP value is too large to be used as an immediate arg for addi */ + li t0, SR_MPP + and s0, s0, t0 +#else andi s0, s0, SR_SPP +#endif bnez s0, resume_kernel resume_userspace: @@ -260,14 +291,18 @@ resume_userspace: REG_S s0, TASK_TI_KERNEL_SP(tp) /* - * Save TP into sscratch, so we can find the kernel data structures - * again. + * Save TP into the scratch register , so we can find the kernel data + * structures again. */ - csrw CSR_SSCRATCH, tp + csrw CSR_SCRATCH, tp restore_all: RESTORE_ALL +#ifdef CONFIG_RISCV_M_MODE + mret +#else sret +#endif #if IS_ENABLED(CONFIG_PREEMPT) resume_kernel: @@ -287,7 +322,7 @@ work_pending: bnez s1, work_resched work_notifysig: /* Handle pending signals and notify-resume requests */ - csrs CSR_SSTATUS, SR_SIE /* Enable interrupts for do_notify_resume() */ + csrs CSR_STATUS, SR_IE /* Enable interrupts for do_notify_resume() */ move a0, sp /* pt_regs */ move a1, s0 /* current_thread_info->flags */ tail do_notify_resume @@ -386,6 +421,10 @@ ENTRY(__switch_to) ret ENDPROC(__switch_to) +#ifndef CONFIG_MMU +#define do_page_fault do_trap_unknown +#endif + .section ".rodata" /* Exception vector table */ ENTRY(excp_vect_table) @@ -407,3 +446,10 @@ ENTRY(excp_vect_table) RISCV_PTR do_page_fault /* store page fault */ excp_vect_table_end: END(excp_vect_table) + +#ifndef CONFIG_MMU +ENTRY(__user_rt_sigreturn) + li a7, __NR_rt_sigreturn + scall +END(__user_rt_sigreturn) +#endif diff --git a/arch/riscv/kernel/fpu.S b/arch/riscv/kernel/fpu.S index 631d31540660..dd2205473de7 100644 --- a/arch/riscv/kernel/fpu.S +++ b/arch/riscv/kernel/fpu.S @@ -23,7 +23,7 @@ ENTRY(__fstate_save) li a2, TASK_THREAD_F0 add a0, a0, a2 li t1, SR_FS - csrs CSR_SSTATUS, t1 + csrs CSR_STATUS, t1 frcsr t0 fsd f0, TASK_THREAD_F0_F0(a0) fsd f1, TASK_THREAD_F1_F0(a0) @@ -58,7 +58,7 @@ ENTRY(__fstate_save) fsd f30, TASK_THREAD_F30_F0(a0) fsd f31, TASK_THREAD_F31_F0(a0) sw t0, TASK_THREAD_FCSR_F0(a0) - csrc CSR_SSTATUS, t1 + csrc CSR_STATUS, t1 ret ENDPROC(__fstate_save) @@ -67,7 +67,7 @@ ENTRY(__fstate_restore) add a0, a0, a2 li t1, SR_FS lw t0, TASK_THREAD_FCSR_F0(a0) - csrs CSR_SSTATUS, t1 + csrs CSR_STATUS, t1 fld f0, TASK_THREAD_F0_F0(a0) fld f1, TASK_THREAD_F1_F0(a0) fld f2, TASK_THREAD_F2_F0(a0) @@ -101,6 +101,6 @@ ENTRY(__fstate_restore) fld f30, TASK_THREAD_F30_F0(a0) fld f31, TASK_THREAD_F31_F0(a0) fscsr t0 - csrc CSR_SSTATUS, t1 + csrc CSR_STATUS, t1 ret ENDPROC(__fstate_restore) diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S index 72f89b7590dd..84a6f0a4b120 100644 --- a/arch/riscv/kernel/head.S +++ b/arch/riscv/kernel/head.S @@ -11,6 +11,7 @@ #include <asm/thread_info.h> #include <asm/page.h> #include <asm/csr.h> +#include <asm/hwcap.h> #include <asm/image.h> __INIT @@ -47,8 +48,22 @@ ENTRY(_start) .global _start_kernel _start_kernel: /* Mask all interrupts */ - csrw CSR_SIE, zero - csrw CSR_SIP, zero + csrw CSR_IE, zero + csrw CSR_IP, zero + +#ifdef CONFIG_RISCV_M_MODE + /* flush the instruction cache */ + fence.i + + /* Reset all registers except ra, a0, a1 */ + call reset_regs + + /* + * The hartid in a0 is expected later on, and we have no firmware + * to hand it to us. + */ + csrr a0, CSR_MHARTID +#endif /* CONFIG_RISCV_M_MODE */ /* Load the global pointer */ .option push @@ -61,7 +76,7 @@ _start_kernel: * floating point in kernel space */ li t0, SR_FS - csrc CSR_SSTATUS, t0 + csrc CSR_STATUS, t0 #ifdef CONFIG_SMP li t0, CONFIG_NR_CPUS @@ -94,8 +109,10 @@ clear_bss_done: la sp, init_thread_union + THREAD_SIZE mv a0, s1 call setup_vm +#ifdef CONFIG_MMU la a0, early_pg_dir call relocate +#endif /* CONFIG_MMU */ /* Restore C environment */ la tp, init_task @@ -106,6 +123,7 @@ clear_bss_done: call parse_dtb tail start_kernel +#ifdef CONFIG_MMU relocate: /* Relocate return address */ li a1, PAGE_OFFSET @@ -116,7 +134,7 @@ relocate: /* Point stvec to virtual address of intruction after satp write */ la a2, 1f add a2, a2, a1 - csrw CSR_STVEC, a2 + csrw CSR_TVEC, a2 /* Compute satp for kernel page tables, but don't load it yet */ srl a2, a0, PAGE_SHIFT @@ -138,7 +156,7 @@ relocate: 1: /* Set trap vector to spin forever to help debug */ la a0, .Lsecondary_park - csrw CSR_STVEC, a0 + csrw CSR_TVEC, a0 /* Reload the global pointer */ .option push @@ -156,12 +174,13 @@ relocate: sfence.vma ret +#endif /* CONFIG_MMU */ .Lsecondary_start: #ifdef CONFIG_SMP /* Set trap vector to spin forever to help debug */ la a3, .Lsecondary_park - csrw CSR_STVEC, a3 + csrw CSR_TVEC, a3 slli a3, a0, LGREG la a1, __cpu_up_stack_pointer @@ -181,9 +200,11 @@ relocate: beqz tp, .Lwait_for_cpu_up fence +#ifdef CONFIG_MMU /* Enable virtual memory and relocate to virtual address */ la a0, swapper_pg_dir call relocate +#endif tail smp_callin #endif @@ -195,6 +216,85 @@ relocate: j .Lsecondary_park END(_start) +#ifdef CONFIG_RISCV_M_MODE +ENTRY(reset_regs) + li sp, 0 + li gp, 0 + li tp, 0 + li t0, 0 + li t1, 0 + li t2, 0 + li s0, 0 + li s1, 0 + li a2, 0 + li a3, 0 + li a4, 0 + li a5, 0 + li a6, 0 + li a7, 0 + li s2, 0 + li s3, 0 + li s4, 0 + li s5, 0 + li s6, 0 + li s7, 0 + li s8, 0 + li s9, 0 + li s10, 0 + li s11, 0 + li t3, 0 + li t4, 0 + li t5, 0 + li t6, 0 + csrw sscratch, 0 + +#ifdef CONFIG_FPU + csrr t0, CSR_MISA + andi t0, t0, (COMPAT_HWCAP_ISA_F | COMPAT_HWCAP_ISA_D) + bnez t0, .Lreset_regs_done + + li t1, SR_FS + csrs CSR_STATUS, t1 + fmv.s.x f0, zero + fmv.s.x f1, zero + fmv.s.x f2, zero + fmv.s.x f3, zero + fmv.s.x f4, zero + fmv.s.x f5, zero + fmv.s.x f6, zero + fmv.s.x f7, zero + fmv.s.x f8, zero + fmv.s.x f9, zero + fmv.s.x f10, zero + fmv.s.x f11, zero + fmv.s.x f12, zero + fmv.s.x f13, zero + fmv.s.x f14, zero + fmv.s.x f15, zero + fmv.s.x f16, zero + fmv.s.x f17, zero + fmv.s.x f18, zero + fmv.s.x f19, zero + fmv.s.x f20, zero + fmv.s.x f21, zero + fmv.s.x f22, zero + fmv.s.x f23, zero + fmv.s.x f24, zero + fmv.s.x f25, zero + fmv.s.x f26, zero + fmv.s.x f27, zero + fmv.s.x f28, zero + fmv.s.x f29, zero + fmv.s.x f30, zero + fmv.s.x f31, zero + csrw fcsr, 0 + /* note that the caller must clear SR_FS */ +#endif /* CONFIG_FPU */ +.Lreset_regs_done: + ret +END(reset_regs) +#endif /* CONFIG_RISCV_M_MODE */ + __PAGE_ALIGNED_BSS /* Empty zero page */ .balign PAGE_SIZE diff --git a/arch/riscv/kernel/irq.c b/arch/riscv/kernel/irq.c index fffac6ddb0e0..3f07a91d5afb 100644 --- a/arch/riscv/kernel/irq.c +++ b/arch/riscv/kernel/irq.c @@ -11,13 +11,6 @@ #include <linux/seq_file.h> #include <asm/smp.h> -/* - * Possible interrupt causes: - */ -#define INTERRUPT_CAUSE_SOFTWARE IRQ_S_SOFT -#define INTERRUPT_CAUSE_TIMER IRQ_S_TIMER -#define INTERRUPT_CAUSE_EXTERNAL IRQ_S_EXT - int arch_show_interrupts(struct seq_file *p, int prec) { show_ipi_stats(p, prec); @@ -29,12 +22,12 @@ asmlinkage __visible void __irq_entry do_IRQ(struct pt_regs *regs) struct pt_regs *old_regs = set_irq_regs(regs); irq_enter(); - switch (regs->scause & ~SCAUSE_IRQ_FLAG) { - case INTERRUPT_CAUSE_TIMER: + switch (regs->cause & ~CAUSE_IRQ_FLAG) { + case IRQ_TIMER: riscv_timer_interrupt(); break; #ifdef CONFIG_SMP - case INTERRUPT_CAUSE_SOFTWARE: + case IRQ_SOFT: /* * We only use software interrupts to pass IPIs, so if a non-SMP * system gets one, then we don't know what to do. @@ -42,11 +35,11 @@ asmlinkage __visible void __irq_entry do_IRQ(struct pt_regs *regs) riscv_software_interrupt(); break; #endif - case INTERRUPT_CAUSE_EXTERNAL: + case IRQ_EXT: handle_arch_irq(regs); break; default: - pr_alert("unexpected interrupt cause 0x%lx", regs->scause); + pr_alert("unexpected interrupt cause 0x%lx", regs->cause); BUG(); } irq_exit(); diff --git a/arch/riscv/kernel/perf_callchain.c b/arch/riscv/kernel/perf_callchain.c index 8d2804f05cf9..cf190197a22f 100644 --- a/arch/riscv/kernel/perf_callchain.c +++ b/arch/riscv/kernel/perf_callchain.c @@ -67,7 +67,7 @@ void perf_callchain_user(struct perf_callchain_entry_ctx *entry, return; fp = regs->s0; - perf_callchain_store(entry, regs->sepc); + perf_callchain_store(entry, regs->epc); fp = user_backtrace(entry, fp, regs->ra); while (fp && !(fp & 0x3) && entry->nr < entry->max_stack) diff --git a/arch/riscv/kernel/process.c b/arch/riscv/kernel/process.c index 85e3c39bb60b..95a3031e5c7c 100644 --- a/arch/riscv/kernel/process.c +++ b/arch/riscv/kernel/process.c @@ -35,8 +35,8 @@ void show_regs(struct pt_regs *regs) { show_regs_print_info(KERN_DEFAULT); - pr_cont("sepc: " REG_FMT " ra : " REG_FMT " sp : " REG_FMT "\n", - regs->sepc, regs->ra, regs->sp); + pr_cont("epc: " REG_FMT " ra : " REG_FMT " sp : " REG_FMT "\n", + regs->epc, regs->ra, regs->sp); pr_cont(" gp : " REG_FMT " tp : " REG_FMT " t0 : " REG_FMT "\n", regs->gp, regs->tp, regs->t0); pr_cont(" t1 : " REG_FMT " t2 : " REG_FMT " s0 : " REG_FMT "\n", @@ -58,23 +58,23 @@ void show_regs(struct pt_regs *regs) pr_cont(" t5 : " REG_FMT " t6 : " REG_FMT "\n", regs->t5, regs->t6); - pr_cont("sstatus: " REG_FMT " sbadaddr: " REG_FMT " scause: " REG_FMT "\n", - regs->sstatus, regs->sbadaddr, regs->scause); + pr_cont("status: " REG_FMT " badaddr: " REG_FMT " cause: " REG_FMT "\n", + regs->status, regs->badaddr, regs->cause); } void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long sp) { - regs->sstatus = SR_SPIE; + regs->status = SR_PIE; if (has_fpu) { - regs->sstatus |= SR_FS_INITIAL; + regs->status |= SR_FS_INITIAL; /* * Restore the initial value to the FP register * before starting the user program. */ fstate_restore(current, regs); } - regs->sepc = pc; + regs->epc = pc; regs->sp = sp; set_fs(USER_DS); } @@ -110,7 +110,8 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, const register unsigned long gp __asm__ ("gp"); memset(childregs, 0, sizeof(struct pt_regs)); childregs->gp = gp; - childregs->sstatus = SR_SPP | SR_SPIE; /* Supervisor, irqs on */ + /* Supervisor/Machine, irqs on: */ + childregs->status = SR_PP | SR_PIE; p->thread.ra = (unsigned long)ret_from_kernel_thread; p->thread.s[0] = usp; /* fn */ diff --git a/arch/riscv/kernel/ptrace.c b/arch/riscv/kernel/ptrace.c index 1252113ef8b2..407464201b91 100644 --- a/arch/riscv/kernel/ptrace.c +++ b/arch/riscv/kernel/ptrace.c @@ -154,6 +154,16 @@ __visible void do_syscall_trace_enter(struct pt_regs *regs) if (tracehook_report_syscall_entry(regs)) syscall_set_nr(current, regs, -1); + /* + * Do the secure computing after ptrace; failures should be fast. + * If this fails we might have return value in a0 from seccomp + * (via SECCOMP_RET_ERRNO/TRACE). + */ + if (secure_computing() == -1) { + syscall_set_nr(current, regs, -1); + return; + } + #ifdef CONFIG_HAVE_SYSCALL_TRACEPOINTS if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) trace_sys_enter(regs, syscall_get_nr(current, regs)); diff --git a/arch/riscv/kernel/reset.c b/arch/riscv/kernel/reset.c index aa56bb135ec4..ee5878d968cc 100644 --- a/arch/riscv/kernel/reset.c +++ b/arch/riscv/kernel/reset.c @@ -5,12 +5,11 @@ #include <linux/reboot.h> #include <linux/pm.h> -#include <asm/sbi.h> static void default_power_off(void) { - sbi_shutdown(); - while (1); + while (1) + wait_for_interrupt(); } void (*pm_power_off)(void) = default_power_off; diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c new file mode 100644 index 000000000000..f6c7c3e82d28 --- /dev/null +++ b/arch/riscv/kernel/sbi.c @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include <linux/init.h> +#include <linux/pm.h> +#include <asm/sbi.h> + +static void sbi_power_off(void) +{ + sbi_shutdown(); +} + +static int __init sbi_init(void) +{ + pm_power_off = sbi_power_off; + return 0; +} +early_initcall(sbi_init); diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c index 845ae0e12115..365ff8420bfe 100644 --- a/arch/riscv/kernel/setup.c +++ b/arch/riscv/kernel/setup.c @@ -17,6 +17,7 @@ #include <linux/sched/task.h> #include <linux/swiotlb.h> +#include <asm/clint.h> #include <asm/setup.h> #include <asm/sections.h> #include <asm/pgtable.h> @@ -67,6 +68,7 @@ void __init setup_arch(char **cmdline_p) setup_bootmem(); paging_init(); unflatten_device_tree(); + clint_init_boot_cpu(); #ifdef CONFIG_SWIOTLB swiotlb_init(1); diff --git a/arch/riscv/kernel/signal.c b/arch/riscv/kernel/signal.c index d0f6f212f5df..17ba190e84a5 100644 --- a/arch/riscv/kernel/signal.c +++ b/arch/riscv/kernel/signal.c @@ -17,11 +17,16 @@ #include <asm/switch_to.h> #include <asm/csr.h> +extern u32 __user_rt_sigreturn[2]; + #define DEBUG_SIG 0 struct rt_sigframe { struct siginfo info; struct ucontext uc; +#ifndef CONFIG_MMU + u32 sigreturn_code[2]; +#endif }; #ifdef CONFIG_FPU @@ -124,7 +129,7 @@ badframe: pr_info_ratelimited( "%s[%d]: bad frame in %s: frame=%p pc=%p sp=%p\n", task->comm, task_pid_nr(task), __func__, - frame, (void *)regs->sepc, (void *)regs->sp); + frame, (void *)regs->epc, (void *)regs->sp); } force_sig(SIGSEGV); return 0; @@ -166,7 +171,6 @@ static inline void __user *get_sigframe(struct ksignal *ksig, return (void __user *)sp; } - static int setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs) { @@ -189,8 +193,19 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set, return -EFAULT; /* Set up to return from userspace. */ +#ifdef CONFIG_MMU regs->ra = (unsigned long)VDSO_SYMBOL( current->mm->context.vdso, rt_sigreturn); +#else + /* + * For the nommu case we don't have a VDSO. Instead we push two + * instructions to call the rt_sigreturn syscall onto the user stack. + */ + if (copy_to_user(&frame->sigreturn_code, __user_rt_sigreturn, + sizeof(frame->sigreturn_code))) + return -EFAULT; + regs->ra = (unsigned long)&frame->sigreturn_code; +#endif /* CONFIG_MMU */ /* * Set up registers for signal handler. @@ -199,7 +214,7 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set, * We always pass siginfo and mcontext, regardless of SA_SIGINFO, * since some things rely on this (e.g. glibc's debug/segfault.c). */ - regs->sepc = (unsigned long)ksig->ka.sa.sa_handler; + regs->epc = (unsigned long)ksig->ka.sa.sa_handler; regs->sp = (unsigned long)frame; regs->a0 = ksig->sig; /* a0: signal number */ regs->a1 = (unsigned long)(&frame->info); /* a1: siginfo pointer */ @@ -208,7 +223,7 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set, #if DEBUG_SIG pr_info("SIG deliver (%s:%d): sig=%d pc=%p ra=%p sp=%p\n", current->comm, task_pid_nr(current), ksig->sig, - (void *)regs->sepc, (void *)regs->ra, frame); + (void *)regs->epc, (void *)regs->ra, frame); #endif return 0; @@ -220,10 +235,9 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs) int ret; /* Are we from a system call? */ - if (regs->scause == EXC_SYSCALL) { + if (regs->cause == EXC_SYSCALL) { /* Avoid additional syscall restarting via ret_from_exception */ - regs->scause = -1UL; - + regs->cause = -1UL; /* If so, check system call restarting.. */ switch (regs->a0) { case -ERESTART_RESTARTBLOCK: @@ -239,7 +253,7 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs) /* fallthrough */ case -ERESTARTNOINTR: regs->a0 = regs->orig_a0; - regs->sepc -= 0x4; + regs->epc -= 0x4; break; } } @@ -261,9 +275,9 @@ static void do_signal(struct pt_regs *regs) } /* Did we come from a system call? */ - if (regs->scause == EXC_SYSCALL) { + if (regs->cause == EXC_SYSCALL) { /* Avoid additional syscall restarting via ret_from_exception */ - regs->scause = -1UL; + regs->cause = -1UL; /* Restart the system call - no handlers present */ switch (regs->a0) { @@ -271,12 +285,12 @@ static void do_signal(struct pt_regs *regs) case -ERESTARTSYS: case -ERESTARTNOINTR: regs->a0 = regs->orig_a0; - regs->sepc -= 0x4; + regs->epc -= 0x4; break; case -ERESTART_RESTARTBLOCK: regs->a0 = regs->orig_a0; regs->a7 = __NR_restart_syscall; - regs->sepc -= 0x4; + regs->epc -= 0x4; break; } } diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c index 5c9ec78422c2..eb878abcaaf8 100644 --- a/arch/riscv/kernel/smp.c +++ b/arch/riscv/kernel/smp.c @@ -16,6 +16,7 @@ #include <linux/seq_file.h> #include <linux/delay.h> +#include <asm/clint.h> #include <asm/sbi.h> #include <asm/tlbflush.h> #include <asm/cacheflush.h> @@ -92,7 +93,10 @@ static void send_ipi_mask(const struct cpumask *mask, enum ipi_message_type op) smp_mb__after_atomic(); riscv_cpuid_to_hartid_mask(mask, &hartid_mask); - sbi_send_ipi(cpumask_bits(&hartid_mask)); + if (IS_ENABLED(CONFIG_RISCV_SBI)) + sbi_send_ipi(cpumask_bits(&hartid_mask)); + else + clint_send_ipi_mask(&hartid_mask); } static void send_ipi_single(int cpu, enum ipi_message_type op) @@ -103,12 +107,18 @@ static void send_ipi_single(int cpu, enum ipi_message_type op) set_bit(op, &ipi_data[cpu].bits); smp_mb__after_atomic(); - sbi_send_ipi(cpumask_bits(cpumask_of(hartid))); + if (IS_ENABLED(CONFIG_RISCV_SBI)) + sbi_send_ipi(cpumask_bits(cpumask_of(hartid))); + else + clint_send_ipi_single(hartid); } static inline void clear_ipi(void) { - csr_clear(CSR_SIP, SIE_SSIE); + if (IS_ENABLED(CONFIG_RISCV_SBI)) + csr_clear(CSR_IP, IE_SIE); + else + clint_clear_ipi(cpuid_to_hartid_map(smp_processor_id())); } void riscv_software_interrupt(void) diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c index 261f4087cc39..8bc01f0ca73b 100644 --- a/arch/riscv/kernel/smpboot.c +++ b/arch/riscv/kernel/smpboot.c @@ -24,6 +24,7 @@ #include <linux/of.h> #include <linux/sched/task_stack.h> #include <linux/sched/mm.h> +#include <asm/clint.h> #include <asm/irq.h> #include <asm/mmu_context.h> #include <asm/tlbflush.h> @@ -137,6 +138,9 @@ asmlinkage __visible void __init smp_callin(void) { struct mm_struct *mm = &init_mm; + if (!IS_ENABLED(CONFIG_RISCV_SBI)) + clint_clear_ipi(cpuid_to_hartid_map(smp_processor_id())); + /* All kernel threads share the same mm context. */ mmgrab(mm); current->active_mm = mm; diff --git a/arch/riscv/kernel/traps.c b/arch/riscv/kernel/traps.c index 473de3ae8bb7..f4cad5163bf2 100644 --- a/arch/riscv/kernel/traps.c +++ b/arch/riscv/kernel/traps.c @@ -41,7 +41,7 @@ void die(struct pt_regs *regs, const char *str) print_modules(); show_regs(regs); - ret = notify_die(DIE_OOPS, str, regs, 0, regs->scause, SIGSEGV); + ret = notify_die(DIE_OOPS, str, regs, 0, regs->cause, SIGSEGV); bust_spinlocks(0); add_taint(TAINT_DIE, LOCKDEP_NOW_UNRELIABLE); @@ -86,7 +86,7 @@ static void do_trap_error(struct pt_regs *regs, int signo, int code, #define DO_ERROR_INFO(name, signo, code, str) \ asmlinkage __visible void name(struct pt_regs *regs) \ { \ - do_trap_error(regs, signo, code, regs->sepc, "Oops - " str); \ + do_trap_error(regs, signo, code, regs->epc, "Oops - " str); \ } DO_ERROR_INFO(do_trap_unknown, @@ -124,9 +124,9 @@ static inline unsigned long get_break_insn_length(unsigned long pc) asmlinkage __visible void do_trap_break(struct pt_regs *regs) { if (user_mode(regs)) - force_sig_fault(SIGTRAP, TRAP_BRKPT, (void __user *)regs->sepc); - else if (report_bug(regs->sepc, regs) == BUG_TRAP_TYPE_WARN) - regs->sepc += get_break_insn_length(regs->sepc); + force_sig_fault(SIGTRAP, TRAP_BRKPT, (void __user *)regs->epc); + else if (report_bug(regs->epc, regs) == BUG_TRAP_TYPE_WARN) + regs->epc += get_break_insn_length(regs->epc); else die(regs, "Kernel BUG"); } @@ -153,9 +153,9 @@ void __init trap_init(void) * Set sup0 scratch register to 0, indicating to exception vector * that we are presently executing in the kernel */ - csr_write(CSR_SSCRATCH, 0); + csr_write(CSR_SCRATCH, 0); /* Set the exception vector address */ - csr_write(CSR_STVEC, &handle_exception); + csr_write(CSR_TVEC, &handle_exception); /* Enable all interrupts */ - csr_write(CSR_SIE, -1); + csr_write(CSR_IE, -1); } diff --git a/arch/riscv/lib/Makefile b/arch/riscv/lib/Makefile index 267feaa10f6a..47e7a8204460 100644 --- a/arch/riscv/lib/Makefile +++ b/arch/riscv/lib/Makefile @@ -1,7 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only -lib-y += delay.o -lib-y += memcpy.o -lib-y += memset.o -lib-y += uaccess.o - -lib-$(CONFIG_64BIT) += tishift.o +lib-y += delay.o +lib-y += memcpy.o +lib-y += memset.o +lib-$(CONFIG_MMU) += uaccess.o +lib-$(CONFIG_64BIT) += tishift.o diff --git a/arch/riscv/lib/uaccess.S b/arch/riscv/lib/uaccess.S index ed2696c0143d..fecd65657a6f 100644 --- a/arch/riscv/lib/uaccess.S +++ b/arch/riscv/lib/uaccess.S @@ -18,7 +18,7 @@ ENTRY(__asm_copy_from_user) /* Enable access to user memory */ li t6, SR_SUM - csrs CSR_SSTATUS, t6 + csrs CSR_STATUS, t6 add a3, a1, a2 /* Use word-oriented copy only if low-order bits match */ @@ -47,7 +47,7 @@ ENTRY(__asm_copy_from_user) 3: /* Disable access to user memory */ - csrc CSR_SSTATUS, t6 + csrc CSR_STATUS, t6 li a0, 0 ret 4: /* Edge case: unalignment */ @@ -72,7 +72,7 @@ ENTRY(__clear_user) /* Enable access to user memory */ li t6, SR_SUM - csrs CSR_SSTATUS, t6 + csrs CSR_STATUS, t6 add a3, a0, a1 addi t0, a0, SZREG-1 @@ -94,7 +94,7 @@ ENTRY(__clear_user) 3: /* Disable access to user memory */ - csrc CSR_SSTATUS, t6 + csrc CSR_STATUS, t6 li a0, 0 ret 4: /* Edge case: unalignment */ @@ -114,11 +114,11 @@ ENDPROC(__clear_user) /* Fixup code for __copy_user(10) and __clear_user(11) */ 10: /* Disable access to user memory */ - csrs CSR_SSTATUS, t6 + csrs CSR_STATUS, t6 mv a0, a2 ret 11: - csrs CSR_SSTATUS, t6 + csrs CSR_STATUS, t6 mv a0, a1 ret .previous diff --git a/arch/riscv/mm/Makefile b/arch/riscv/mm/Makefile index 9d9a17335686..3c8b33258457 100644 --- a/arch/riscv/mm/Makefile +++ b/arch/riscv/mm/Makefile @@ -6,9 +6,8 @@ CFLAGS_REMOVE_init.o = -pg endif obj-y += init.o -obj-y += fault.o obj-y += extable.o -obj-y += ioremap.o +obj-$(CONFIG_MMU) += fault.o obj-y += cacheflush.o obj-y += context.o obj-y += sifive_l2_cache.o diff --git a/arch/riscv/mm/cacheflush.c b/arch/riscv/mm/cacheflush.c index 3f15938dec89..8f1900686640 100644 --- a/arch/riscv/mm/cacheflush.c +++ b/arch/riscv/mm/cacheflush.c @@ -10,9 +10,17 @@ #include <asm/sbi.h> +static void ipi_remote_fence_i(void *info) +{ + return local_flush_icache_all(); +} + void flush_icache_all(void) { - sbi_remote_fence_i(NULL); + if (IS_ENABLED(CONFIG_RISCV_SBI)) + sbi_remote_fence_i(NULL); + else + on_each_cpu(ipi_remote_fence_i, NULL, 1); } /* @@ -28,7 +36,7 @@ void flush_icache_all(void) void flush_icache_mm(struct mm_struct *mm, bool local) { unsigned int cpu; - cpumask_t others, hmask, *mask; + cpumask_t others, *mask; preempt_disable(); @@ -46,10 +54,7 @@ void flush_icache_mm(struct mm_struct *mm, bool local) */ cpumask_andnot(&others, mm_cpumask(mm), cpumask_of(cpu)); local |= cpumask_empty(&others); - if (mm != current->active_mm || !local) { - riscv_cpuid_to_hartid_mask(&others, &hmask); - sbi_remote_fence_i(hmask.bits); - } else { + if (mm == current->active_mm && local) { /* * It's assumed that at least one strongly ordered operation is * performed on this hart between setting a hart's cpumask bit @@ -59,6 +64,13 @@ void flush_icache_mm(struct mm_struct *mm, bool local) * with flush_icache_deferred(). */ smp_mb(); + } else if (IS_ENABLED(CONFIG_RISCV_SBI)) { + cpumask_t hartid_mask; + + riscv_cpuid_to_hartid_mask(&others, &hartid_mask); + sbi_remote_fence_i(cpumask_bits(&hartid_mask)); + } else { + on_each_cpu_mask(&others, ipi_remote_fence_i, NULL, 1); } preempt_enable(); @@ -66,6 +78,7 @@ void flush_icache_mm(struct mm_struct *mm, bool local) #endif /* CONFIG_SMP */ +#ifdef CONFIG_MMU void flush_icache_pte(pte_t pte) { struct page *page = pte_page(pte); @@ -73,3 +86,4 @@ void flush_icache_pte(pte_t pte) if (!test_and_set_bit(PG_dcache_clean, &page->flags)) flush_icache_all(); } +#endif /* CONFIG_MMU */ diff --git a/arch/riscv/mm/context.c b/arch/riscv/mm/context.c index ca66d44156b6..613ec81a8979 100644 --- a/arch/riscv/mm/context.c +++ b/arch/riscv/mm/context.c @@ -58,8 +58,10 @@ void switch_mm(struct mm_struct *prev, struct mm_struct *next, cpumask_clear_cpu(cpu, mm_cpumask(prev)); cpumask_set_cpu(cpu, mm_cpumask(next)); +#ifdef CONFIG_MMU csr_write(CSR_SATP, virt_to_pfn(next->pgd) | SATP_MODE); local_flush_tlb_all(); +#endif flush_icache_deferred(next); } diff --git a/arch/riscv/mm/extable.c b/arch/riscv/mm/extable.c index 7aed9178d365..2fc729422151 100644 --- a/arch/riscv/mm/extable.c +++ b/arch/riscv/mm/extable.c @@ -15,9 +15,9 @@ int fixup_exception(struct pt_regs *regs) { const struct exception_table_entry *fixup; - fixup = search_exception_tables(regs->sepc); + fixup = search_exception_tables(regs->epc); if (fixup) { - regs->sepc = fixup->fixup; + regs->epc = fixup->fixup; return 1; } return 0; diff --git a/arch/riscv/mm/fault.c b/arch/riscv/mm/fault.c index 247b8c859c44..cf7248e07f43 100644 --- a/arch/riscv/mm/fault.c +++ b/arch/riscv/mm/fault.c @@ -34,8 +34,8 @@ asmlinkage void do_page_fault(struct pt_regs *regs) int code = SEGV_MAPERR; vm_fault_t fault; - cause = regs->scause; - addr = regs->sbadaddr; + cause = regs->cause; + addr = regs->badaddr; tsk = current; mm = tsk->mm; @@ -53,7 +53,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs) goto vmalloc_fault; /* Enable interrupts if they were enabled in the parent context. */ - if (likely(regs->sstatus & SR_SPIE)) + if (likely(regs->status & SR_PIE)) local_irq_enable(); /* diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c index 573463d1c799..69f6678db7f3 100644 --- a/arch/riscv/mm/init.c +++ b/arch/riscv/mm/init.c @@ -26,6 +26,7 @@ unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)] EXPORT_SYMBOL(empty_zero_page); extern char _start[]; +void *dtb_early_va; static void __init zone_sizes_init(void) { @@ -40,11 +41,42 @@ static void __init zone_sizes_init(void) free_area_init_nodes(max_zone_pfns); } -void setup_zero_page(void) +static void setup_zero_page(void) { memset((void *)empty_zero_page, 0, PAGE_SIZE); } +#ifdef CONFIG_DEBUG_VM +static inline void print_mlk(char *name, unsigned long b, unsigned long t) +{ + pr_notice("%12s : 0x%08lx - 0x%08lx (%4ld kB)\n", name, b, t, + (((t) - (b)) >> 10)); +} + +static inline void print_mlm(char *name, unsigned long b, unsigned long t) +{ + pr_notice("%12s : 0x%08lx - 0x%08lx (%4ld MB)\n", name, b, t, + (((t) - (b)) >> 20)); +} + +static void print_vm_layout(void) +{ + pr_notice("Virtual kernel memory layout:\n"); + print_mlk("fixmap", (unsigned long)FIXADDR_START, + (unsigned long)FIXADDR_TOP); + print_mlm("pci io", (unsigned long)PCI_IO_START, + (unsigned long)PCI_IO_END); + print_mlm("vmemmap", (unsigned long)VMEMMAP_START, + (unsigned long)VMEMMAP_END); + print_mlm("vmalloc", (unsigned long)VMALLOC_START, + (unsigned long)VMALLOC_END); + print_mlm("lowmem", (unsigned long)PAGE_OFFSET, + (unsigned long)high_memory); +} +#else +static void print_vm_layout(void) { } +#endif /* CONFIG_DEBUG_VM */ + void __init mem_init(void) { #ifdef CONFIG_FLATMEM @@ -55,6 +87,7 @@ void __init mem_init(void) memblock_free_all(); mem_init_print_info(NULL); + print_vm_layout(); } #ifdef CONFIG_BLK_DEV_INITRD @@ -142,12 +175,12 @@ void __init setup_bootmem(void) } } +#ifdef CONFIG_MMU unsigned long va_pa_offset; EXPORT_SYMBOL(va_pa_offset); unsigned long pfn_base; EXPORT_SYMBOL(pfn_base); -void *dtb_early_va; pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned_bss; pgd_t trampoline_pg_dir[PTRS_PER_PGD] __page_aligned_bss; pte_t fixmap_pte[PTRS_PER_PTE] __page_aligned_bss; @@ -273,7 +306,6 @@ static void __init create_pmd_mapping(pmd_t *pmdp, #define get_pgd_next_virt(__pa) get_pmd_virt(__pa) #define create_pgd_next_mapping(__nextp, __va, __pa, __sz, __prot) \ create_pmd_mapping(__nextp, __va, __pa, __sz, __prot) -#define PTE_PARENT_SIZE PMD_SIZE #define fixmap_pgd_next fixmap_pmd #else #define pgd_next_t pte_t @@ -281,7 +313,6 @@ static void __init create_pmd_mapping(pmd_t *pmdp, #define get_pgd_next_virt(__pa) get_pte_virt(__pa) #define create_pgd_next_mapping(__nextp, __va, __pa, __sz, __prot) \ create_pte_mapping(__nextp, __va, __pa, __sz, __prot) -#define PTE_PARENT_SIZE PGDIR_SIZE #define fixmap_pgd_next fixmap_pte #endif @@ -314,14 +345,11 @@ static void __init create_pgd_mapping(pgd_t *pgdp, static uintptr_t __init best_map_size(phys_addr_t base, phys_addr_t size) { - uintptr_t map_size = PAGE_SIZE; - - /* Upgrade to PMD/PGDIR mappings whenever possible */ - if (!(base & (PTE_PARENT_SIZE - 1)) && - !(size & (PTE_PARENT_SIZE - 1))) - map_size = PTE_PARENT_SIZE; + /* Upgrade to PMD_SIZE mappings whenever possible */ + if ((base & (PMD_SIZE - 1)) || (size & (PMD_SIZE - 1))) + return PAGE_SIZE; - return map_size; + return PMD_SIZE; } /* @@ -449,6 +477,16 @@ static void __init setup_vm_final(void) csr_write(CSR_SATP, PFN_DOWN(__pa(swapper_pg_dir)) | SATP_MODE); local_flush_tlb_all(); } +#else +asmlinkage void __init setup_vm(uintptr_t dtb_pa) +{ + dtb_early_va = (void *)dtb_pa; +} + +static inline void setup_vm_final(void) +{ +} +#endif /* CONFIG_MMU */ void __init paging_init(void) { diff --git a/arch/riscv/mm/ioremap.c b/arch/riscv/mm/ioremap.c deleted file mode 100644 index ac621ddb45c0..000000000000 --- a/arch/riscv/mm/ioremap.c +++ /dev/null @@ -1,84 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * (C) Copyright 1995 1996 Linus Torvalds - * (C) Copyright 2012 Regents of the University of California - */ - -#include <linux/export.h> -#include <linux/mm.h> -#include <linux/vmalloc.h> -#include <linux/io.h> - -#include <asm/pgtable.h> - -/* - * Remap an arbitrary physical address space into the kernel virtual - * address space. Needed when the kernel wants to access high addresses - * directly. - * - * NOTE! We need to allow non-page-aligned mappings too: we will obviously - * have to convert them into an offset in a page-aligned mapping, but the - * caller shouldn't need to know that small detail. - */ -static void __iomem *__ioremap_caller(phys_addr_t addr, size_t size, - pgprot_t prot, void *caller) -{ - phys_addr_t last_addr; - unsigned long offset, vaddr; - struct vm_struct *area; - - /* Disallow wrap-around or zero size */ - last_addr = addr + size - 1; - if (!size || last_addr < addr) - return NULL; - - /* Page-align mappings */ - offset = addr & (~PAGE_MASK); - addr -= offset; - size = PAGE_ALIGN(size + offset); - - area = get_vm_area_caller(size, VM_IOREMAP, caller); - if (!area) - return NULL; - vaddr = (unsigned long)area->addr; - - if (ioremap_page_range(vaddr, vaddr + size, addr, prot)) { - free_vm_area(area); - return NULL; - } - - return (void __iomem *)(vaddr + offset); -} - -/* - * ioremap - map bus memory into CPU space - * @offset: bus address of the memory - * @size: size of the resource to map - * - * ioremap performs a platform specific sequence of operations to - * make bus memory CPU accessible via the readb/readw/readl/writeb/ - * writew/writel functions and the other mmio helpers. The returned - * address is not guaranteed to be usable directly as a virtual - * address. - * - * Must be freed with iounmap. - */ -void __iomem *ioremap(phys_addr_t offset, unsigned long size) -{ - return __ioremap_caller(offset, size, PAGE_KERNEL, - __builtin_return_address(0)); -} -EXPORT_SYMBOL(ioremap); - - -/** - * iounmap - Free a IO remapping - * @addr: virtual address from ioremap_* - * - * Caller must ensure there is only one unmapping for the same pointer. - */ -void iounmap(volatile void __iomem *addr) -{ - vunmap((void *)((unsigned long)addr & PAGE_MASK)); -} -EXPORT_SYMBOL(iounmap); diff --git a/arch/riscv/mm/tlbflush.c b/arch/riscv/mm/tlbflush.c index 24cd33d2c48f..720b443c4528 100644 --- a/arch/riscv/mm/tlbflush.c +++ b/arch/riscv/mm/tlbflush.c @@ -2,6 +2,7 @@ #include <linux/mm.h> #include <linux/smp.h> +#include <linux/sched.h> #include <asm/sbi.h> void flush_tlb_all(void) @@ -9,13 +10,33 @@ void flush_tlb_all(void) sbi_remote_sfence_vma(NULL, 0, -1); } +/* + * This function must not be called with cmask being null. + * Kernel may panic if cmask is NULL. + */ static void __sbi_tlb_flush_range(struct cpumask *cmask, unsigned long start, unsigned long size) { struct cpumask hmask; + unsigned int cpuid; - riscv_cpuid_to_hartid_mask(cmask, &hmask); - sbi_remote_sfence_vma(hmask.bits, start, size); + if (cpumask_empty(cmask)) + return; + + cpuid = get_cpu(); + + if (cpumask_any_but(cmask, cpuid) >= nr_cpu_ids) { + /* local cpu is the only cpu present in cpumask */ + if (size <= PAGE_SIZE) + local_flush_tlb_page(start); + else + local_flush_tlb_all(); + } else { + riscv_cpuid_to_hartid_mask(cmask, &hmask); + sbi_remote_sfence_vma(cpumask_bits(&hmask), start, size); + } + + put_cpu(); } void flush_tlb_mm(struct mm_struct *mm) diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index f0df9e48e651..d4051e88e625 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -170,6 +170,7 @@ config S390 select HAVE_PERF_EVENTS select HAVE_RCU_TABLE_FREE select HAVE_REGS_AND_STACK_ACCESS_API + select HAVE_RELIABLE_STACKTRACE select HAVE_RSEQ select HAVE_SYSCALL_TRACEPOINTS select HAVE_VIRT_CPU_ACCOUNTING @@ -426,9 +427,6 @@ config COMPAT (and some other stuff like libraries and such) is needed for executing 31 bit applications. It is safe to say "Y". -config COMPAT_VDSO - def_bool COMPAT && !CC_IS_CLANG - config SYSVIPC_COMPAT def_bool y if COMPAT && SYSVIPC @@ -1018,3 +1016,17 @@ config S390_GUEST the KVM hypervisor. endmenu + +menu "Selftests" + +config S390_UNWIND_SELFTEST + def_tristate n + prompt "Test unwind functions" + help + This option enables s390 specific stack unwinder testing kernel + module. This option is not useful for distributions or general + kernels, but only for kernel developers working on architecture code. + + Say N if you are unsure. + +endmenu diff --git a/arch/s390/Makefile b/arch/s390/Makefile index 478b645b20dd..ba8556bb0fb1 100644 --- a/arch/s390/Makefile +++ b/arch/s390/Makefile @@ -157,7 +157,6 @@ zfcpdump: vdso_install: $(Q)$(MAKE) $(build)=arch/$(ARCH)/kernel/vdso64 $@ - $(Q)$(MAKE) $(build)=arch/$(ARCH)/kernel/vdso32 $@ archclean: $(Q)$(MAKE) $(clean)=$(boot) diff --git a/arch/s390/boot/startup.c b/arch/s390/boot/startup.c index fbd341ea03b8..3b3a11f95269 100644 --- a/arch/s390/boot/startup.c +++ b/arch/s390/boot/startup.c @@ -170,6 +170,11 @@ void startup_kernel(void) handle_relocs(__kaslr_offset); if (__kaslr_offset) { + /* + * Save KASLR offset for early dumps, before vmcore_info is set. + * Mark as uneven to distinguish from real vmcore_info pointer. + */ + S390_lowcore.vmcore_info = __kaslr_offset | 0x1UL; /* Clear non-relocated kernel */ if (IS_ENABLED(CONFIG_KERNEL_UNCOMPRESSED)) memset(img, 0, vmlinux.image_size); diff --git a/arch/s390/include/asm/bitops.h b/arch/s390/include/asm/bitops.h index eb7eed43e780..431e208a5ea4 100644 --- a/arch/s390/include/asm/bitops.h +++ b/arch/s390/include/asm/bitops.h @@ -241,7 +241,9 @@ static inline void arch___clear_bit_unlock(unsigned long nr, arch___clear_bit(nr, ptr); } -#include <asm-generic/bitops-instrumented.h> +#include <asm-generic/bitops/instrumented-atomic.h> +#include <asm-generic/bitops/instrumented-non-atomic.h> +#include <asm-generic/bitops/instrumented-lock.h> /* * Functions which use MSB0 bit numbering. diff --git a/arch/s390/include/asm/cpu_mf.h b/arch/s390/include/asm/cpu_mf.h index 819803a97c2b..0d90cbeb89b4 100644 --- a/arch/s390/include/asm/cpu_mf.h +++ b/arch/s390/include/asm/cpu_mf.h @@ -313,7 +313,7 @@ static inline unsigned long *trailer_entry_ptr(unsigned long v) return (unsigned long *) ret; } -/* Return if the entry in the sample data block table (sdbt) +/* Return true if the entry in the sample data block table (sdbt) * is a link to the next sdbt */ static inline int is_link_entry(unsigned long *s) { diff --git a/arch/s390/include/asm/io.h b/arch/s390/include/asm/io.h index ca421614722f..5a16f500515a 100644 --- a/arch/s390/include/asm/io.h +++ b/arch/s390/include/asm/io.h @@ -26,10 +26,6 @@ void unxlate_dev_mem_ptr(phys_addr_t phys, void *addr); #define IO_SPACE_LIMIT 0 -#define ioremap_nocache(addr, size) ioremap(addr, size) -#define ioremap_wc ioremap_nocache -#define ioremap_wt ioremap_nocache - void __iomem *ioremap(unsigned long offset, unsigned long size); void iounmap(volatile void __iomem *addr); diff --git a/arch/s390/include/asm/pci.h b/arch/s390/include/asm/pci.h index a2399eff84ca..3a06c264ea53 100644 --- a/arch/s390/include/asm/pci.h +++ b/arch/s390/include/asm/pci.h @@ -2,9 +2,6 @@ #ifndef __ASM_S390_PCI_H #define __ASM_S390_PCI_H -/* must be set before including pci_clp.h */ -#define PCI_BAR_COUNT 6 - #include <linux/pci.h> #include <linux/mutex.h> #include <linux/iommu.h> @@ -138,7 +135,7 @@ struct zpci_dev { char res_name[16]; bool mio_capable; - struct zpci_bar_struct bars[PCI_BAR_COUNT]; + struct zpci_bar_struct bars[PCI_STD_NUM_BARS]; u64 start_dma; /* Start of available DMA addresses */ u64 end_dma; /* End of available DMA addresses */ diff --git a/arch/s390/include/asm/pci_clp.h b/arch/s390/include/asm/pci_clp.h index 50359172cc48..bd2cb4ea7d93 100644 --- a/arch/s390/include/asm/pci_clp.h +++ b/arch/s390/include/asm/pci_clp.h @@ -77,7 +77,7 @@ struct mio_info { struct { u64 wb; u64 wt; - } addr[PCI_BAR_COUNT]; + } addr[PCI_STD_NUM_BARS]; u32 reserved[6]; } __packed; @@ -98,9 +98,9 @@ struct clp_rsp_query_pci { u16 util_str_avail : 1; /* utility string available? */ u16 pfgid : 8; /* pci function group id */ u32 fid; /* pci function id */ - u8 bar_size[PCI_BAR_COUNT]; + u8 bar_size[PCI_STD_NUM_BARS]; u16 pchid; - __le32 bar[PCI_BAR_COUNT]; + __le32 bar[PCI_STD_NUM_BARS]; u8 pfip[CLP_PFIP_NR_SEGMENTS]; /* pci function internal path */ u32 : 16; u8 fmb_len; diff --git a/arch/s390/include/asm/perf_event.h b/arch/s390/include/asm/perf_event.h index 4652ffffe0b2..b9da71632827 100644 --- a/arch/s390/include/asm/perf_event.h +++ b/arch/s390/include/asm/perf_event.h @@ -12,6 +12,7 @@ #include <linux/perf_event.h> #include <linux/device.h> +#include <asm/stacktrace.h> /* Per-CPU flags for PMU states */ #define PMU_F_RESERVED 0x1000 @@ -73,4 +74,10 @@ struct perf_sf_sde_regs { #define SDB_FULL_BLOCKS(hwc) (SAMPL_FLAGS(hwc) & PERF_CPUM_SF_FULL_BLOCKS) #define SAMPLE_FREQ_MODE(hwc) (SAMPL_FLAGS(hwc) & PERF_CPUM_SF_FREQ_MODE) +#define perf_arch_fetch_caller_regs(regs, __ip) do { \ + (regs)->psw.addr = (__ip); \ + (regs)->gprs[15] = (unsigned long)__builtin_frame_address(0) - \ + offsetof(struct stack_frame, back_chain); \ +} while (0) + #endif /* _ASM_S390_PERF_EVENT_H */ diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h index 881fc37c11c6..361ef5eda468 100644 --- a/arch/s390/include/asm/processor.h +++ b/arch/s390/include/asm/processor.h @@ -310,7 +310,7 @@ void enabled_wait(void); /* * Function to drop a processor into disabled wait state */ -static inline void __noreturn disabled_wait(void) +static __always_inline void __noreturn disabled_wait(void) { psw_t psw; diff --git a/arch/s390/include/asm/stacktrace.h b/arch/s390/include/asm/stacktrace.h index fee40212af11..ee056f4a4fa3 100644 --- a/arch/s390/include/asm/stacktrace.h +++ b/arch/s390/include/asm/stacktrace.h @@ -33,12 +33,12 @@ static inline bool on_stack(struct stack_info *info, return addr >= info->begin && addr + len <= info->end; } -static inline unsigned long get_stack_pointer(struct task_struct *task, - struct pt_regs *regs) +static __always_inline unsigned long get_stack_pointer(struct task_struct *task, + struct pt_regs *regs) { if (regs) return (unsigned long) kernel_stack_pointer(regs); - if (!task || task == current) + if (task == current) return current_stack_pointer(); return (unsigned long) task->thread.ksp; } @@ -62,6 +62,17 @@ struct stack_frame { }; #endif +/* + * Unlike current_stack_pointer() which simply returns current value of %r15 + * current_frame_address() returns function stack frame address, which matches + * %r15 upon function invocation. It may differ from %r15 later if function + * allocates stack for local variables or new stack frame to call other + * functions. + */ +#define current_frame_address() \ + ((unsigned long)__builtin_frame_address(0) - \ + offsetof(struct stack_frame, back_chain)) + #define CALL_ARGS_0() \ register unsigned long r2 asm("2") #define CALL_ARGS_1(arg1) \ @@ -95,20 +106,33 @@ struct stack_frame { #define CALL_ON_STACK(fn, stack, nr, args...) \ ({ \ + unsigned long frame = current_frame_address(); \ CALL_ARGS_##nr(args); \ unsigned long prev; \ \ asm volatile( \ " la %[_prev],0(15)\n" \ - " la 15,0(%[_stack])\n" \ - " stg %[_prev],%[_bc](15)\n" \ + " lg 15,%[_stack]\n" \ + " stg %[_frame],%[_bc](15)\n" \ " brasl 14,%[_fn]\n" \ " la 15,0(%[_prev])\n" \ : [_prev] "=&a" (prev), CALL_FMT_##nr \ - [_stack] "a" (stack), \ + [_stack] "R" (stack), \ [_bc] "i" (offsetof(struct stack_frame, back_chain)), \ + [_frame] "d" (frame), \ [_fn] "X" (fn) : CALL_CLOBBER_##nr); \ r2; \ }) +#define CALL_ON_STACK_NORETURN(fn, stack) \ +({ \ + asm volatile( \ + " la 15,0(%[_stack])\n" \ + " xc %[_bc](8,15),%[_bc](15)\n" \ + " brasl 14,%[_fn]\n" \ + ::[_bc] "i" (offsetof(struct stack_frame, back_chain)), \ + [_stack] "a" (stack), [_fn] "X" (fn)); \ + BUG(); \ +}) + #endif /* _ASM_S390_STACKTRACE_H */ diff --git a/arch/s390/include/asm/unwind.h b/arch/s390/include/asm/unwind.h index eaaefeceef6f..de9006b0cfeb 100644 --- a/arch/s390/include/asm/unwind.h +++ b/arch/s390/include/asm/unwind.h @@ -35,7 +35,6 @@ struct unwind_state { struct task_struct *task; struct pt_regs *regs; unsigned long sp, ip; - bool reuse_sp; int graph_idx; bool reliable; bool error; @@ -59,10 +58,11 @@ static inline bool unwind_error(struct unwind_state *state) static inline void unwind_start(struct unwind_state *state, struct task_struct *task, struct pt_regs *regs, - unsigned long sp) + unsigned long first_frame) { - sp = sp ? : get_stack_pointer(task, regs); - __unwind_start(state, task, regs, sp); + task = task ?: current; + first_frame = first_frame ?: get_stack_pointer(task, regs); + __unwind_start(state, task, regs, first_frame); } static inline struct pt_regs *unwind_get_entry_regs(struct unwind_state *state) diff --git a/arch/s390/include/asm/vdso.h b/arch/s390/include/asm/vdso.h index 169d7604eb80..3bcfdeb01395 100644 --- a/arch/s390/include/asm/vdso.h +++ b/arch/s390/include/asm/vdso.h @@ -41,8 +41,17 @@ struct vdso_data { struct vdso_per_cpu_data { __u64 ectg_timer_base; __u64 ectg_user_time; - __u32 cpu_nr; - __u32 node_id; + /* + * Note: node_id and cpu_nr must be at adjacent memory locations. + * VDSO userspace must read both values with a single instruction. + */ + union { + __u64 getcpu_val; + struct { + __u32 node_id; + __u32 cpu_nr; + }; + }; }; extern struct vdso_data *vdso_data; diff --git a/arch/s390/include/uapi/asm/ipcbuf.h b/arch/s390/include/uapi/asm/ipcbuf.h index 5b1c4f47c656..1030cd186899 100644 --- a/arch/s390/include/uapi/asm/ipcbuf.h +++ b/arch/s390/include/uapi/asm/ipcbuf.h @@ -2,6 +2,8 @@ #ifndef __S390_IPCBUF_H__ #define __S390_IPCBUF_H__ +#include <linux/posix_types.h> + /* * The user_ipc_perm structure for S/390 architecture. * Note extra padding because this structure is passed back and forth diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile index 7edbbcd8228a..2b1203cf7be6 100644 --- a/arch/s390/kernel/Makefile +++ b/arch/s390/kernel/Makefile @@ -81,4 +81,3 @@ obj-$(CONFIG_TRACEPOINTS) += trace.o # vdso obj-y += vdso64/ -obj-$(CONFIG_COMPAT_VDSO) += vdso32/ diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c index 41ac4ad21311..ce33406cfe83 100644 --- a/arch/s390/kernel/asm-offsets.c +++ b/arch/s390/kernel/asm-offsets.c @@ -78,8 +78,7 @@ int main(void) OFFSET(__VDSO_TS_END, vdso_data, ts_end); OFFSET(__VDSO_ECTG_BASE, vdso_per_cpu_data, ectg_timer_base); OFFSET(__VDSO_ECTG_USER, vdso_per_cpu_data, ectg_user_time); - OFFSET(__VDSO_CPU_NR, vdso_per_cpu_data, cpu_nr); - OFFSET(__VDSO_NODE_ID, vdso_per_cpu_data, node_id); + OFFSET(__VDSO_GETCPU_VAL, vdso_per_cpu_data, getcpu_val); BLANK(); /* constants used by the vdso */ DEFINE(__CLOCK_REALTIME, CLOCK_REALTIME); diff --git a/arch/s390/kernel/dumpstack.c b/arch/s390/kernel/dumpstack.c index 34bdc60c0b11..d306fe04489a 100644 --- a/arch/s390/kernel/dumpstack.c +++ b/arch/s390/kernel/dumpstack.c @@ -38,6 +38,7 @@ const char *stack_type_name(enum stack_type type) return "unknown"; } } +EXPORT_SYMBOL_GPL(stack_type_name); static inline bool in_stack(unsigned long sp, struct stack_info *info, enum stack_type type, unsigned long low, @@ -93,7 +94,9 @@ int get_stack_info(unsigned long sp, struct task_struct *task, if (!sp) goto unknown; - task = task ? : current; + /* Sanity check: ABI requires SP to be aligned 8 bytes. */ + if (sp & 0x7) + goto unknown; /* Check per-task stack */ if (in_task_stack(sp, task, info)) @@ -128,8 +131,6 @@ void show_stack(struct task_struct *task, unsigned long *stack) struct unwind_state state; printk("Call Trace:\n"); - if (!task) - task = current; unwind_for_each_frame(&state, task, NULL, (unsigned long) stack) printk(state.reliable ? " [<%016lx>] %pSR \n" : "([<%016lx>] %pSR)\n", diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S index b9e585f528a6..8b88dbbda7df 100644 --- a/arch/s390/kernel/head64.S +++ b/arch/s390/kernel/head64.S @@ -31,7 +31,7 @@ ENTRY(startup_continue) # larl %r14,init_task stg %r14,__LC_CURRENT - larl %r15,init_thread_union+THREAD_SIZE-STACK_FRAME_OVERHEAD + larl %r15,init_thread_union+THREAD_SIZE-STACK_FRAME_OVERHEAD-__PT_SIZE #ifdef CONFIG_KASAN brasl %r14,kasan_early_init #endif diff --git a/arch/s390/kernel/machine_kexec.c b/arch/s390/kernel/machine_kexec.c index 444a19125a81..cb8b1cc285c9 100644 --- a/arch/s390/kernel/machine_kexec.c +++ b/arch/s390/kernel/machine_kexec.c @@ -164,7 +164,9 @@ static bool kdump_csum_valid(struct kimage *image) #ifdef CONFIG_CRASH_DUMP int rc; + preempt_disable(); rc = CALL_ON_STACK(do_start_kdump, S390_lowcore.nodat_stack, 1, image); + preempt_enable(); return rc == 0; #else return false; @@ -254,10 +256,10 @@ void arch_crash_save_vmcoreinfo(void) VMCOREINFO_SYMBOL(lowcore_ptr); VMCOREINFO_SYMBOL(high_memory); VMCOREINFO_LENGTH(lowcore_ptr, NR_CPUS); - mem_assign_absolute(S390_lowcore.vmcore_info, paddr_vmcoreinfo_note()); vmcoreinfo_append_str("SDMA=%lx\n", __sdma); vmcoreinfo_append_str("EDMA=%lx\n", __edma); vmcoreinfo_append_str("KERNELOFFSET=%lx\n", kaslr_offset()); + mem_assign_absolute(S390_lowcore.vmcore_info, paddr_vmcoreinfo_note()); } void machine_shutdown(void) diff --git a/arch/s390/kernel/perf_cpum_sf.c b/arch/s390/kernel/perf_cpum_sf.c index 69506fdbd9a1..c07fdcd73726 100644 --- a/arch/s390/kernel/perf_cpum_sf.c +++ b/arch/s390/kernel/perf_cpum_sf.c @@ -156,8 +156,8 @@ static void free_sampling_buffer(struct sf_buffer *sfb) } } - debug_sprintf_event(sfdbg, 5, "%s freed sdbt %p\n", __func__, - sfb->sdbt); + debug_sprintf_event(sfdbg, 5, "%s: freed sdbt %#lx\n", __func__, + (unsigned long)sfb->sdbt); memset(sfb, 0, sizeof(*sfb)); } @@ -193,7 +193,7 @@ static int realloc_sampling_buffer(struct sf_buffer *sfb, unsigned long num_sdb, gfp_t gfp_flags) { int i, rc; - unsigned long *new, *tail; + unsigned long *new, *tail, *tail_prev = NULL; if (!sfb->sdbt || !sfb->tail) return -EINVAL; @@ -213,9 +213,10 @@ static int realloc_sampling_buffer(struct sf_buffer *sfb, */ if (sfb->sdbt != get_next_sdbt(tail)) { debug_sprintf_event(sfdbg, 3, "%s: " - "sampling buffer is not linked: origin %p" - " tail %p\n", __func__, - (void *)sfb->sdbt, (void *)tail); + "sampling buffer is not linked: origin %#lx" + " tail %#lx\n", __func__, + (unsigned long)sfb->sdbt, + (unsigned long)tail); return -EINVAL; } @@ -232,6 +233,7 @@ static int realloc_sampling_buffer(struct sf_buffer *sfb, sfb->num_sdbt++; /* Link current page to tail of chain */ *tail = (unsigned long)(void *) new + 1; + tail_prev = tail; tail = new; } @@ -241,18 +243,30 @@ static int realloc_sampling_buffer(struct sf_buffer *sfb, * issue, a new realloc call (if required) might succeed. */ rc = alloc_sample_data_block(tail, gfp_flags); - if (rc) + if (rc) { + /* Undo last SDBT. An SDBT with no SDB at its first + * entry but with an SDBT entry instead can not be + * handled by the interrupt handler code. + * Avoid this situation. + */ + if (tail_prev) { + sfb->num_sdbt--; + free_page((unsigned long) new); + tail = tail_prev; + } break; + } sfb->num_sdb++; tail++; + tail_prev = new = NULL; /* Allocated at least one SBD */ } /* Link sampling buffer to its origin */ *tail = (unsigned long) sfb->sdbt + 1; sfb->tail = tail; - debug_sprintf_event(sfdbg, 4, "realloc_sampling_buffer: new buffer" - " settings: sdbt %lu sdb %lu\n", + debug_sprintf_event(sfdbg, 4, "%s: new buffer" + " settings: sdbt %lu sdb %lu\n", __func__, sfb->num_sdbt, sfb->num_sdb); return rc; } @@ -292,12 +306,13 @@ static int alloc_sampling_buffer(struct sf_buffer *sfb, unsigned long num_sdb) rc = realloc_sampling_buffer(sfb, num_sdb, GFP_KERNEL); if (rc) { free_sampling_buffer(sfb); - debug_sprintf_event(sfdbg, 4, "alloc_sampling_buffer: " - "realloc_sampling_buffer failed with rc %i\n", rc); + debug_sprintf_event(sfdbg, 4, "%s: " + "realloc_sampling_buffer failed with rc %i\n", + __func__, rc); } else debug_sprintf_event(sfdbg, 4, - "alloc_sampling_buffer: tear %p dear %p\n", - sfb->sdbt, (void *)*sfb->sdbt); + "%s: tear %#lx dear %#lx\n", __func__, + (unsigned long)sfb->sdbt, (unsigned long)*sfb->sdbt); return rc; } @@ -465,8 +480,8 @@ static void sfb_account_overflows(struct cpu_hw_sf *cpuhw, if (num) sfb_account_allocs(num, hwc); - debug_sprintf_event(sfdbg, 5, "sfb: overflow: overflow %llu ratio %lu" - " num %lu\n", OVERFLOW_REG(hwc), ratio, num); + debug_sprintf_event(sfdbg, 5, "%s: overflow %llu ratio %lu num %lu\n", + __func__, OVERFLOW_REG(hwc), ratio, num); OVERFLOW_REG(hwc) = 0; } @@ -504,13 +519,13 @@ static void extend_sampling_buffer(struct sf_buffer *sfb, */ rc = realloc_sampling_buffer(sfb, num, GFP_ATOMIC); if (rc) - debug_sprintf_event(sfdbg, 5, "sfb: extend: realloc " - "failed with rc %i\n", rc); + debug_sprintf_event(sfdbg, 5, "%s: realloc failed with rc %i\n", + __func__, rc); if (sfb_has_pending_allocs(sfb, hwc)) - debug_sprintf_event(sfdbg, 5, "sfb: extend: " + debug_sprintf_event(sfdbg, 5, "%s: " "req %lu alloc %lu remaining %lu\n", - num, sfb->num_sdb - num_old, + __func__, num, sfb->num_sdb - num_old, sfb_pending_allocs(sfb, hwc)); } @@ -600,13 +615,6 @@ static void hw_init_period(struct hw_perf_event *hwc, u64 period) local64_set(&hwc->period_left, hwc->sample_period); } -static void hw_reset_registers(struct hw_perf_event *hwc, - unsigned long *sdbt_origin) -{ - /* (Re)set to first sample-data-block-table */ - TEAR_REG(hwc) = (unsigned long) sdbt_origin; -} - static unsigned long hw_limit_rate(const struct hws_qsi_info_block *si, unsigned long rate) { @@ -698,9 +706,9 @@ static unsigned long getrate(bool freq, unsigned long sample, */ if (sample_rate_to_freq(si, rate) > sysctl_perf_event_sample_rate) { - debug_sprintf_event(sfdbg, 1, + debug_sprintf_event(sfdbg, 1, "%s: " "Sampling rate exceeds maximum " - "perf sample rate\n"); + "perf sample rate\n", __func__); rate = 0; } } @@ -745,10 +753,9 @@ static int __hw_perf_event_init_rate(struct perf_event *event, attr->sample_period = rate; SAMPL_RATE(hwc) = rate; hw_init_period(hwc, SAMPL_RATE(hwc)); - debug_sprintf_event(sfdbg, 4, "__hw_perf_event_init_rate:" - "cpu:%d period:%#llx freq:%d,%#lx\n", event->cpu, - event->attr.sample_period, event->attr.freq, - SAMPLE_FREQ_MODE(hwc)); + debug_sprintf_event(sfdbg, 4, "%s: cpu %d period %#llx freq %d,%#lx\n", + __func__, event->cpu, event->attr.sample_period, + event->attr.freq, SAMPLE_FREQ_MODE(hwc)); return 0; } @@ -951,8 +958,7 @@ static void cpumsf_pmu_enable(struct pmu *pmu) * buffer extents */ sfb_account_overflows(cpuhw, hwc); - if (sfb_has_pending_allocs(&cpuhw->sfb, hwc)) - extend_sampling_buffer(&cpuhw->sfb, hwc); + extend_sampling_buffer(&cpuhw->sfb, hwc); } /* Rate may be adjusted with ioctl() */ cpuhw->lsctl.interval = SAMPL_RATE(&cpuhw->event->hw); @@ -973,12 +979,11 @@ static void cpumsf_pmu_enable(struct pmu *pmu) /* Load current program parameter */ lpp(&S390_lowcore.lpp); - debug_sprintf_event(sfdbg, 6, "pmu_enable: es %i cs %i ed %i cd %i " - "interval %#lx tear %p dear %p\n", + debug_sprintf_event(sfdbg, 6, "%s: es %i cs %i ed %i cd %i " + "interval %#lx tear %#lx dear %#lx\n", __func__, cpuhw->lsctl.es, cpuhw->lsctl.cs, cpuhw->lsctl.ed, cpuhw->lsctl.cd, cpuhw->lsctl.interval, - (void *) cpuhw->lsctl.tear, - (void *) cpuhw->lsctl.dear); + cpuhw->lsctl.tear, cpuhw->lsctl.dear); } static void cpumsf_pmu_disable(struct pmu *pmu) @@ -1019,8 +1024,8 @@ static void cpumsf_pmu_disable(struct pmu *pmu) cpuhw->lsctl.dear = si.dear; } } else - debug_sprintf_event(sfdbg, 3, "cpumsf_pmu_disable: " - "qsi() failed with err %i\n", err); + debug_sprintf_event(sfdbg, 3, "%s: qsi() failed with err %i\n", + __func__, err); cpuhw->flags &= ~PMU_F_ENABLED; } @@ -1265,9 +1270,9 @@ static void hw_perf_event_update(struct perf_event *event, int flush_all) sampl_overflow += te->overflow; /* Timestamps are valid for full sample-data-blocks only */ - debug_sprintf_event(sfdbg, 6, "%s: sdbt %p " + debug_sprintf_event(sfdbg, 6, "%s: sdbt %#lx " "overflow %llu timestamp %#llx\n", - __func__, sdbt, te->overflow, + __func__, (unsigned long)sdbt, te->overflow, (te->f) ? trailer_timestamp(te) : 0ULL); /* Collect all samples from a single sample-data-block and @@ -1312,8 +1317,10 @@ static void hw_perf_event_update(struct perf_event *event, int flush_all) sampl_overflow, 1 + num_sdb); if (sampl_overflow || event_overflow) debug_sprintf_event(sfdbg, 4, "%s: " - "overflow stats: sample %llu event %llu\n", - __func__, sampl_overflow, event_overflow); + "overflows: sample %llu event %llu" + " total %llu num_sdb %llu\n", + __func__, sampl_overflow, event_overflow, + OVERFLOW_REG(hwc), num_sdb); } #define AUX_SDB_INDEX(aux, i) ((i) % aux->sfb.num_sdb) @@ -1424,10 +1431,10 @@ static int aux_output_begin(struct perf_output_handle *handle, cpuhw->lsctl.tear = base + offset * sizeof(unsigned long); cpuhw->lsctl.dear = aux->sdb_index[head]; - debug_sprintf_event(sfdbg, 6, "aux_output_begin: " + debug_sprintf_event(sfdbg, 6, "%s: " "head->alert_mark->empty_mark (num_alert, range)" "[%#lx -> %#lx -> %#lx] (%#lx, %#lx) " - "tear index %#lx, tear %#lx dear %#lx\n", + "tear index %#lx, tear %#lx dear %#lx\n", __func__, aux->head, aux->alert_mark, aux->empty_mark, AUX_SDB_NUM_ALERT(aux), range, head / CPUM_SF_SDB_PER_TABLE, @@ -1571,7 +1578,9 @@ static void hw_collect_aux(struct cpu_hw_sf *cpuhw) pr_err("The AUX buffer with %lu pages for the " "diagnostic-sampling mode is full\n", num_sdb); - debug_sprintf_event(sfdbg, 1, "AUX buffer used up\n"); + debug_sprintf_event(sfdbg, 1, + "%s: AUX buffer used up\n", + __func__); break; } if (WARN_ON_ONCE(!aux)) @@ -1594,23 +1603,25 @@ static void hw_collect_aux(struct cpu_hw_sf *cpuhw) perf_aux_output_end(&cpuhw->handle, size); pr_err("Sample data caused the AUX buffer with %lu " "pages to overflow\n", num_sdb); - debug_sprintf_event(sfdbg, 1, "head %#lx range %#lx " - "overflow %#llx\n", + debug_sprintf_event(sfdbg, 1, "%s: head %#lx range %#lx " + "overflow %#llx\n", __func__, aux->head, range, overflow); } else { size = AUX_SDB_NUM_ALERT(aux) << PAGE_SHIFT; perf_aux_output_end(&cpuhw->handle, size); - debug_sprintf_event(sfdbg, 6, "head %#lx alert %#lx " + debug_sprintf_event(sfdbg, 6, "%s: head %#lx alert %#lx " "already full, try another\n", + __func__, aux->head, aux->alert_mark); } } if (done) - debug_sprintf_event(sfdbg, 6, "aux_reset_buffer: " + debug_sprintf_event(sfdbg, 6, "%s: aux_reset_buffer " "[%#lx -> %#lx -> %#lx] (%#lx, %#lx)\n", - aux->head, aux->alert_mark, aux->empty_mark, - AUX_SDB_NUM_ALERT(aux), range); + __func__, aux->head, aux->alert_mark, + aux->empty_mark, AUX_SDB_NUM_ALERT(aux), + range); } /* @@ -1633,8 +1644,8 @@ static void aux_buffer_free(void *data) kfree(aux->sdb_index); kfree(aux); - debug_sprintf_event(sfdbg, 4, "aux_buffer_free: free " - "%lu SDBTs\n", num_sdbt); + debug_sprintf_event(sfdbg, 4, "%s: free " + "%lu SDBTs\n", __func__, num_sdbt); } static void aux_sdb_init(unsigned long sdb) @@ -1742,9 +1753,8 @@ static void *aux_buffer_setup(struct perf_event *event, void **pages, */ aux->empty_mark = sfb->num_sdb - 1; - debug_sprintf_event(sfdbg, 4, "aux_buffer_setup: setup %lu SDBTs" - " and %lu SDBs\n", - sfb->num_sdbt, sfb->num_sdb); + debug_sprintf_event(sfdbg, 4, "%s: setup %lu SDBTs and %lu SDBs\n", + __func__, sfb->num_sdbt, sfb->num_sdb); return aux; @@ -1797,9 +1807,9 @@ static int cpumsf_pmu_check_period(struct perf_event *event, u64 value) event->attr.sample_period = rate; SAMPL_RATE(&event->hw) = rate; hw_init_period(&event->hw, SAMPL_RATE(&event->hw)); - debug_sprintf_event(sfdbg, 4, "cpumsf_pmu_check_period:" - "cpu:%d value:%#llx period:%#llx freq:%d\n", - event->cpu, value, + debug_sprintf_event(sfdbg, 4, "%s:" + " cpu %d value %#llx period %#llx freq %d\n", + __func__, event->cpu, value, event->attr.sample_period, do_freq); return 0; } @@ -1875,7 +1885,7 @@ static int cpumsf_pmu_add(struct perf_event *event, int flags) if (!SAMPL_DIAG_MODE(&event->hw)) { cpuhw->lsctl.tear = (unsigned long) cpuhw->sfb.sdbt; cpuhw->lsctl.dear = *(unsigned long *) cpuhw->sfb.sdbt; - hw_reset_registers(&event->hw, cpuhw->sfb.sdbt); + TEAR_REG(&event->hw) = (unsigned long) cpuhw->sfb.sdbt; } /* Ensure sampling functions are in the disabled state. If disabled, @@ -2030,7 +2040,7 @@ static void cpumf_measurement_alert(struct ext_code ext_code, /* Report measurement alerts only for non-PRA codes */ if (alert != CPU_MF_INT_SF_PRA) - debug_sprintf_event(sfdbg, 6, "measurement alert: %#x\n", + debug_sprintf_event(sfdbg, 6, "%s: alert %#x\n", __func__, alert); /* Sampling authorization change request */ diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index ad71132374f0..58faa12542a1 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -856,7 +856,7 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) } /* Do the secure computing check after ptrace. */ - if (secure_computing(NULL)) { + if (secure_computing()) { /* seccomp failures shouldn't expose any additional code. */ return -1; } diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 3ff291bc63b7..9cbf490fd162 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -355,7 +355,6 @@ early_initcall(async_stack_realloc); void __init arch_call_rest_init(void) { - struct stack_frame *frame; unsigned long stack; stack = stack_alloc(); @@ -368,13 +367,7 @@ void __init arch_call_rest_init(void) set_task_stack_end_magic(current); stack += STACK_INIT_OFFSET; S390_lowcore.kernel_stack = stack; - frame = (struct stack_frame *) stack; - memset(frame, 0, sizeof(*frame)); - /* Branch to rest_init on the new stack, never returns */ - asm volatile( - " la 15,0(%[_frame])\n" - " jg rest_init\n" - : : [_frame] "a" (frame)); + CALL_ON_STACK_NORETURN(rest_init, stack); } static void __init setup_lowcore_dat_off(void) diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 6acdcf1d4074..2794cad9312e 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -262,10 +262,13 @@ static void pcpu_prepare_secondary(struct pcpu *pcpu, int cpu) lc->spinlock_index = 0; lc->percpu_offset = __per_cpu_offset[cpu]; lc->kernel_asce = S390_lowcore.kernel_asce; + lc->user_asce = S390_lowcore.kernel_asce; lc->machine_flags = S390_lowcore.machine_flags; lc->user_timer = lc->system_timer = lc->steal_timer = lc->avg_steal_timer = 0; __ctl_store(lc->cregs_save_area, 0, 15); + lc->cregs_save_area[1] = lc->kernel_asce; + lc->cregs_save_area[7] = lc->vdso_asce; save_access_regs((unsigned int *) lc->access_regs_save_area); memcpy(lc->stfle_fac_list, S390_lowcore.stfle_fac_list, sizeof(lc->stfle_fac_list)); @@ -844,6 +847,8 @@ static void smp_init_secondary(void) S390_lowcore.last_update_clock = get_tod_clock(); restore_access_regs(S390_lowcore.access_regs_save_area); + set_cpu_flag(CIF_ASCE_PRIMARY); + set_cpu_flag(CIF_ASCE_SECONDARY); cpu_init(); preempt_disable(); init_cpu_timer(); @@ -871,7 +876,7 @@ static void __no_sanitize_address smp_start_secondary(void *cpuvoid) S390_lowcore.restart_source = -1UL; __ctl_load(S390_lowcore.cregs_save_area, 0, 15); __load_psw_mask(PSW_KERNEL_BITS | PSW_MASK_DAT); - CALL_ON_STACK(smp_init_secondary, S390_lowcore.kernel_stack, 0); + CALL_ON_STACK_NORETURN(smp_init_secondary, S390_lowcore.kernel_stack); } /* Upping and downing of CPUs */ diff --git a/arch/s390/kernel/stacktrace.c b/arch/s390/kernel/stacktrace.c index f8fc4f8aef9b..fc5419ac64c8 100644 --- a/arch/s390/kernel/stacktrace.c +++ b/arch/s390/kernel/stacktrace.c @@ -9,6 +9,7 @@ #include <linux/stacktrace.h> #include <asm/stacktrace.h> #include <asm/unwind.h> +#include <asm/kprobes.h> void arch_stack_walk(stack_trace_consume_fn consume_entry, void *cookie, struct task_struct *task, struct pt_regs *regs) @@ -22,3 +23,45 @@ void arch_stack_walk(stack_trace_consume_fn consume_entry, void *cookie, break; } } + +/* + * This function returns an error if it detects any unreliable features of the + * stack. Otherwise it guarantees that the stack trace is reliable. + * + * If the task is not 'current', the caller *must* ensure the task is inactive. + */ +int arch_stack_walk_reliable(stack_trace_consume_fn consume_entry, + void *cookie, struct task_struct *task) +{ + struct unwind_state state; + unsigned long addr; + + unwind_for_each_frame(&state, task, NULL, 0) { + if (state.stack_info.type != STACK_TYPE_TASK) + return -EINVAL; + + if (state.regs) + return -EINVAL; + + addr = unwind_get_return_address(&state); + if (!addr) + return -EINVAL; + +#ifdef CONFIG_KPROBES + /* + * Mark stacktraces with kretprobed functions on them + * as unreliable. + */ + if (state.ip == (unsigned long)kretprobe_trampoline) + return -EINVAL; +#endif + + if (!consume_entry(cookie, addr, false)) + return -EINVAL; + } + + /* Check for stack corruption */ + if (unwind_error(&state)) + return -EINVAL; + return 0; +} diff --git a/arch/s390/kernel/unwind_bc.c b/arch/s390/kernel/unwind_bc.c index fa111d3d378f..da2d4d4c5b0e 100644 --- a/arch/s390/kernel/unwind_bc.c +++ b/arch/s390/kernel/unwind_bc.c @@ -36,6 +36,12 @@ static bool update_stack_info(struct unwind_state *state, unsigned long sp) return true; } +static inline bool is_task_pt_regs(struct unwind_state *state, + struct pt_regs *regs) +{ + return task_pt_regs(state->task) == regs; +} + bool unwind_next_frame(struct unwind_state *state) { struct stack_info *info = &state->stack_info; @@ -46,20 +52,16 @@ bool unwind_next_frame(struct unwind_state *state) regs = state->regs; if (unlikely(regs)) { - if (state->reuse_sp) { - sp = state->sp; - state->reuse_sp = false; - } else { - sp = READ_ONCE_NOCHECK(regs->gprs[15]); - if (unlikely(outside_of_stack(state, sp))) { - if (!update_stack_info(state, sp)) - goto out_err; - } - } + sp = state->sp; sf = (struct stack_frame *) sp; ip = READ_ONCE_NOCHECK(sf->gprs[8]); reliable = false; regs = NULL; + if (!__kernel_text_address(ip)) { + /* skip bogus %r14 */ + state->regs = NULL; + return unwind_next_frame(state); + } } else { sf = (struct stack_frame *) state->sp; sp = READ_ONCE_NOCHECK(sf->back_chain); @@ -76,15 +78,24 @@ bool unwind_next_frame(struct unwind_state *state) /* No back-chain, look for a pt_regs structure */ sp = state->sp + STACK_FRAME_OVERHEAD; if (!on_stack(info, sp, sizeof(struct pt_regs))) - goto out_stop; + goto out_err; regs = (struct pt_regs *) sp; - if (READ_ONCE_NOCHECK(regs->psw.mask) & PSW_MASK_PSTATE) + if (is_task_pt_regs(state, regs)) goto out_stop; ip = READ_ONCE_NOCHECK(regs->psw.addr); + sp = READ_ONCE_NOCHECK(regs->gprs[15]); + if (unlikely(outside_of_stack(state, sp))) { + if (!update_stack_info(state, sp)) + goto out_err; + } reliable = true; } } + /* Sanity check: ABI requires SP to be aligned 8 bytes. */ + if (sp & 0x7) + goto out_err; + ip = ftrace_graph_ret_addr(state->task, &state->graph_idx, ip, (void *) sp); /* Update unwind state */ @@ -103,13 +114,11 @@ out_stop: EXPORT_SYMBOL_GPL(unwind_next_frame); void __unwind_start(struct unwind_state *state, struct task_struct *task, - struct pt_regs *regs, unsigned long sp) + struct pt_regs *regs, unsigned long first_frame) { struct stack_info *info = &state->stack_info; - unsigned long *mask = &state->stack_mask; - bool reliable, reuse_sp; struct stack_frame *sf; - unsigned long ip; + unsigned long ip, sp; memset(state, 0, sizeof(*state)); state->task = task; @@ -121,25 +130,28 @@ void __unwind_start(struct unwind_state *state, struct task_struct *task, return; } + /* Get the instruction pointer from pt_regs or the stack frame */ + if (regs) { + ip = regs->psw.addr; + sp = regs->gprs[15]; + } else if (task == current) { + sp = current_frame_address(); + } else { + sp = task->thread.ksp; + } + /* Get current stack pointer and initialize stack info */ - if (get_stack_info(sp, task, info, mask) != 0 || - !on_stack(info, sp, sizeof(struct stack_frame))) { + if (!update_stack_info(state, sp)) { /* Something is wrong with the stack pointer */ info->type = STACK_TYPE_UNKNOWN; state->error = true; return; } - /* Get the instruction pointer from pt_regs or the stack frame */ - if (regs) { - ip = READ_ONCE_NOCHECK(regs->psw.addr); - reliable = true; - reuse_sp = true; - } else { - sf = (struct stack_frame *) sp; + if (!regs) { + /* Stack frame is within valid stack */ + sf = (struct stack_frame *)sp; ip = READ_ONCE_NOCHECK(sf->gprs[8]); - reliable = false; - reuse_sp = false; } ip = ftrace_graph_ret_addr(state->task, &state->graph_idx, ip, NULL); @@ -147,7 +159,17 @@ void __unwind_start(struct unwind_state *state, struct task_struct *task, /* Update unwind state */ state->sp = sp; state->ip = ip; - state->reliable = reliable; - state->reuse_sp = reuse_sp; + state->reliable = true; + + if (!first_frame) + return; + /* Skip through the call chain to the specified starting frame */ + while (!unwind_done(state)) { + if (on_stack(&state->stack_info, first_frame, sizeof(struct stack_frame))) { + if (state->sp >= first_frame) + break; + } + unwind_next_frame(state); + } } EXPORT_SYMBOL_GPL(__unwind_start); diff --git a/arch/s390/kernel/vdso.c b/arch/s390/kernel/vdso.c index ed1fc08ccea2..bcc9bdb39ba2 100644 --- a/arch/s390/kernel/vdso.c +++ b/arch/s390/kernel/vdso.c @@ -29,13 +29,6 @@ #include <asm/vdso.h> #include <asm/facility.h> -#ifdef CONFIG_COMPAT_VDSO -extern char vdso32_start, vdso32_end; -static void *vdso32_kbase = &vdso32_start; -static unsigned int vdso32_pages; -static struct page **vdso32_pagelist; -#endif - extern char vdso64_start, vdso64_end; static void *vdso64_kbase = &vdso64_start; static unsigned int vdso64_pages; @@ -55,12 +48,6 @@ static vm_fault_t vdso_fault(const struct vm_special_mapping *sm, vdso_pagelist = vdso64_pagelist; vdso_pages = vdso64_pages; -#ifdef CONFIG_COMPAT_VDSO - if (vma->vm_mm->context.compat_mm) { - vdso_pagelist = vdso32_pagelist; - vdso_pages = vdso32_pages; - } -#endif if (vmf->pgoff >= vdso_pages) return VM_FAULT_SIGBUS; @@ -76,10 +63,6 @@ static int vdso_mremap(const struct vm_special_mapping *sm, unsigned long vdso_pages; vdso_pages = vdso64_pages; -#ifdef CONFIG_COMPAT_VDSO - if (vma->vm_mm->context.compat_mm) - vdso_pages = vdso32_pages; -#endif if ((vdso_pages << PAGE_SHIFT) != vma->vm_end - vma->vm_start) return -EINVAL; @@ -209,12 +192,10 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) if (!vdso_enabled) return 0; + if (is_compat_task()) + return 0; + vdso_pages = vdso64_pages; -#ifdef CONFIG_COMPAT_VDSO - mm->context.compat_mm = is_compat_task(); - if (mm->context.compat_mm) - vdso_pages = vdso32_pages; -#endif /* * vDSO has a problem and was disabled, just don't "enable" it for * the process @@ -267,23 +248,6 @@ static int __init vdso_init(void) int i; vdso_init_data(vdso_data); -#ifdef CONFIG_COMPAT_VDSO - /* Calculate the size of the 32 bit vDSO */ - vdso32_pages = ((&vdso32_end - &vdso32_start - + PAGE_SIZE - 1) >> PAGE_SHIFT) + 1; - - /* Make sure pages are in the correct state */ - vdso32_pagelist = kcalloc(vdso32_pages + 1, sizeof(struct page *), - GFP_KERNEL); - BUG_ON(vdso32_pagelist == NULL); - for (i = 0; i < vdso32_pages - 1; i++) { - struct page *pg = virt_to_page(vdso32_kbase + i*PAGE_SIZE); - get_page(pg); - vdso32_pagelist[i] = pg; - } - vdso32_pagelist[vdso32_pages - 1] = virt_to_page(vdso_data); - vdso32_pagelist[vdso32_pages] = NULL; -#endif /* Calculate the size of the 64 bit vDSO */ vdso64_pages = ((&vdso64_end - &vdso64_start diff --git a/arch/s390/kernel/vdso32/.gitignore b/arch/s390/kernel/vdso32/.gitignore deleted file mode 100644 index e45fba9d0ced..000000000000 --- a/arch/s390/kernel/vdso32/.gitignore +++ /dev/null @@ -1 +0,0 @@ -vdso32.lds diff --git a/arch/s390/kernel/vdso32/Makefile b/arch/s390/kernel/vdso32/Makefile deleted file mode 100644 index aee9ffbccb54..000000000000 --- a/arch/s390/kernel/vdso32/Makefile +++ /dev/null @@ -1,66 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# List of files in the vdso, has to be asm only for now - -KCOV_INSTRUMENT := n - -obj-vdso32 = gettimeofday.o clock_getres.o clock_gettime.o note.o getcpu.o - -# Build rules - -targets := $(obj-vdso32) vdso32.so vdso32.so.dbg -obj-vdso32 := $(addprefix $(obj)/, $(obj-vdso32)) - -KBUILD_AFLAGS += -DBUILD_VDSO -KBUILD_CFLAGS += -DBUILD_VDSO - -KBUILD_AFLAGS_31 := $(filter-out -m64,$(KBUILD_AFLAGS)) -KBUILD_AFLAGS_31 += -m31 -s - -KBUILD_CFLAGS_31 := $(filter-out -m64,$(KBUILD_CFLAGS)) -KBUILD_CFLAGS_31 += -m31 -fPIC -shared -fno-common -fno-builtin -KBUILD_CFLAGS_31 += -nostdlib -Wl,-soname=linux-vdso32.so.1 \ - -Wl,--hash-style=both - -$(targets:%=$(obj)/%.dbg): KBUILD_CFLAGS = $(KBUILD_CFLAGS_31) -$(targets:%=$(obj)/%.dbg): KBUILD_AFLAGS = $(KBUILD_AFLAGS_31) - -obj-y += vdso32_wrapper.o -extra-y += vdso32.lds -CPPFLAGS_vdso32.lds += -P -C -U$(ARCH) - -# Disable gcov profiling, ubsan and kasan for VDSO code -GCOV_PROFILE := n -UBSAN_SANITIZE := n -KASAN_SANITIZE := n - -# Force dependency (incbin is bad) -$(obj)/vdso32_wrapper.o : $(obj)/vdso32.so - -# link rule for the .so file, .lds has to be first -$(obj)/vdso32.so.dbg: $(src)/vdso32.lds $(obj-vdso32) FORCE - $(call if_changed,vdso32ld) - -# strip rule for the .so file -$(obj)/%.so: OBJCOPYFLAGS := -S -$(obj)/%.so: $(obj)/%.so.dbg FORCE - $(call if_changed,objcopy) - -# assembly rules for the .S files -$(obj-vdso32): %.o: %.S FORCE - $(call if_changed_dep,vdso32as) - -# actual build commands -quiet_cmd_vdso32ld = VDSO32L $@ - cmd_vdso32ld = $(CC) $(c_flags) -Wl,-T $(filter %.lds %.o,$^) -o $@ -quiet_cmd_vdso32as = VDSO32A $@ - cmd_vdso32as = $(CC) $(a_flags) -c -o $@ $< - -# install commands for the unstripped file -quiet_cmd_vdso_install = INSTALL $@ - cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/$@ - -vdso32.so: $(obj)/vdso32.so.dbg - @mkdir -p $(MODLIB)/vdso - $(call cmd,vdso_install) - -vdso_install: vdso32.so diff --git a/arch/s390/kernel/vdso32/clock_getres.S b/arch/s390/kernel/vdso32/clock_getres.S deleted file mode 100644 index eaf9cf1417f6..000000000000 --- a/arch/s390/kernel/vdso32/clock_getres.S +++ /dev/null @@ -1,44 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Userland implementation of clock_getres() for 32 bits processes in a - * s390 kernel for use in the vDSO - * - * Copyright IBM Corp. 2008 - * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com) - */ -#include <asm/vdso.h> -#include <asm/asm-offsets.h> -#include <asm/unistd.h> -#include <asm/dwarf.h> - - .text - .align 4 - .globl __kernel_clock_getres - .type __kernel_clock_getres,@function -__kernel_clock_getres: - CFI_STARTPROC - basr %r1,0 - la %r1,4f-.(%r1) - chi %r2,__CLOCK_REALTIME - je 0f - chi %r2,__CLOCK_MONOTONIC - je 0f - la %r1,5f-4f(%r1) - chi %r2,__CLOCK_REALTIME_COARSE - je 0f - chi %r2,__CLOCK_MONOTONIC_COARSE - jne 3f -0: ltr %r3,%r3 - jz 2f /* res == NULL */ -1: l %r0,0(%r1) - xc 0(4,%r3),0(%r3) /* set tp->tv_sec to zero */ - st %r0,4(%r3) /* store tp->tv_usec */ -2: lhi %r2,0 - br %r14 -3: lhi %r1,__NR_clock_getres /* fallback to svc */ - svc 0 - br %r14 - CFI_ENDPROC -4: .long __CLOCK_REALTIME_RES -5: .long __CLOCK_COARSE_RES - .size __kernel_clock_getres,.-__kernel_clock_getres diff --git a/arch/s390/kernel/vdso32/clock_gettime.S b/arch/s390/kernel/vdso32/clock_gettime.S deleted file mode 100644 index ada5c11a16e5..000000000000 --- a/arch/s390/kernel/vdso32/clock_gettime.S +++ /dev/null @@ -1,179 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Userland implementation of clock_gettime() for 32 bits processes in a - * s390 kernel for use in the vDSO - * - * Copyright IBM Corp. 2008 - * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com) - */ -#include <asm/vdso.h> -#include <asm/asm-offsets.h> -#include <asm/unistd.h> -#include <asm/dwarf.h> -#include <asm/ptrace.h> - - .text - .align 4 - .globl __kernel_clock_gettime - .type __kernel_clock_gettime,@function -__kernel_clock_gettime: - CFI_STARTPROC - ahi %r15,-16 - CFI_DEF_CFA_OFFSET STACK_FRAME_OVERHEAD+16 - CFI_VAL_OFFSET 15, -STACK_FRAME_OVERHEAD - basr %r5,0 -0: al %r5,21f-0b(%r5) /* get &_vdso_data */ - chi %r2,__CLOCK_REALTIME_COARSE - je 10f - chi %r2,__CLOCK_REALTIME - je 11f - chi %r2,__CLOCK_MONOTONIC_COARSE - je 9f - chi %r2,__CLOCK_MONOTONIC - jne 19f - - /* CLOCK_MONOTONIC */ -1: l %r4,__VDSO_UPD_COUNT+4(%r5) /* load update counter */ - tml %r4,0x0001 /* pending update ? loop */ - jnz 1b - stcke 0(%r15) /* Store TOD clock */ - lm %r0,%r1,1(%r15) - s %r0,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */ - sl %r1,__VDSO_XTIME_STAMP+4(%r5) - brc 3,2f - ahi %r0,-1 -2: ms %r0,__VDSO_TK_MULT(%r5) /* * tk->mult */ - lr %r2,%r0 - l %r0,__VDSO_TK_MULT(%r5) - ltr %r1,%r1 - mr %r0,%r0 - jnm 3f - a %r0,__VDSO_TK_MULT(%r5) -3: alr %r0,%r2 - al %r0,__VDSO_WTOM_NSEC(%r5) - al %r1,__VDSO_WTOM_NSEC+4(%r5) - brc 12,5f - ahi %r0,1 -5: l %r2,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */ - srdl %r0,0(%r2) /* >> tk->shift */ - l %r2,__VDSO_WTOM_SEC+4(%r5) - cl %r4,__VDSO_UPD_COUNT+4(%r5) /* check update counter */ - jne 1b - basr %r5,0 -6: ltr %r0,%r0 - jnz 7f - cl %r1,20f-6b(%r5) - jl 8f -7: ahi %r2,1 - sl %r1,20f-6b(%r5) - brc 3,6b - ahi %r0,-1 - j 6b -8: st %r2,0(%r3) /* store tp->tv_sec */ - st %r1,4(%r3) /* store tp->tv_nsec */ - lhi %r2,0 - ahi %r15,16 - CFI_DEF_CFA_OFFSET STACK_FRAME_OVERHEAD - CFI_RESTORE 15 - br %r14 - - /* CLOCK_MONOTONIC_COARSE */ - CFI_DEF_CFA_OFFSET STACK_FRAME_OVERHEAD+16 - CFI_VAL_OFFSET 15, -STACK_FRAME_OVERHEAD -9: l %r4,__VDSO_UPD_COUNT+4(%r5) /* load update counter */ - tml %r4,0x0001 /* pending update ? loop */ - jnz 9b - l %r2,__VDSO_WTOM_CRS_SEC+4(%r5) - l %r1,__VDSO_WTOM_CRS_NSEC+4(%r5) - cl %r4,__VDSO_UPD_COUNT+4(%r5) /* check update counter */ - jne 9b - j 8b - - /* CLOCK_REALTIME_COARSE */ -10: l %r4,__VDSO_UPD_COUNT+4(%r5) /* load update counter */ - tml %r4,0x0001 /* pending update ? loop */ - jnz 10b - l %r2,__VDSO_XTIME_CRS_SEC+4(%r5) - l %r1,__VDSO_XTIME_CRS_NSEC+4(%r5) - cl %r4,__VDSO_UPD_COUNT+4(%r5) /* check update counter */ - jne 10b - j 17f - - /* CLOCK_REALTIME */ -11: l %r4,__VDSO_UPD_COUNT+4(%r5) /* load update counter */ - tml %r4,0x0001 /* pending update ? loop */ - jnz 11b - stcke 0(%r15) /* Store TOD clock */ - lm %r0,%r1,__VDSO_TS_END(%r5) /* TOD steering end time */ - s %r0,1(%r15) /* no - ts_steering_end */ - sl %r1,5(%r15) - brc 3,22f - ahi %r0,-1 -22: ltr %r0,%r0 /* past end of steering? */ - jm 24f - srdl %r0,15 /* 1 per 2^16 */ - tm __VDSO_TS_DIR+3(%r5),0x01 /* steering direction? */ - jz 23f - lcr %r0,%r0 /* negative TOD offset */ - lcr %r1,%r1 - je 23f - ahi %r0,-1 -23: a %r0,1(%r15) /* add TOD timestamp */ - al %r1,5(%r15) - brc 12,25f - ahi %r0,1 - j 25f -24: lm %r0,%r1,1(%r15) /* load TOD timestamp */ -25: s %r0,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */ - sl %r1,__VDSO_XTIME_STAMP+4(%r5) - brc 3,12f - ahi %r0,-1 -12: ms %r0,__VDSO_TK_MULT(%r5) /* * tk->mult */ - lr %r2,%r0 - l %r0,__VDSO_TK_MULT(%r5) - ltr %r1,%r1 - mr %r0,%r0 - jnm 13f - a %r0,__VDSO_TK_MULT(%r5) -13: alr %r0,%r2 - al %r0,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */ - al %r1,__VDSO_XTIME_NSEC+4(%r5) - brc 12,14f - ahi %r0,1 -14: l %r2,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */ - srdl %r0,0(%r2) /* >> tk->shift */ - l %r2,__VDSO_XTIME_SEC+4(%r5) - cl %r4,__VDSO_UPD_COUNT+4(%r5) /* check update counter */ - jne 11b - basr %r5,0 -15: ltr %r0,%r0 - jnz 16f - cl %r1,20f-15b(%r5) - jl 17f -16: ahi %r2,1 - sl %r1,20f-15b(%r5) - brc 3,15b - ahi %r0,-1 - j 15b -17: st %r2,0(%r3) /* store tp->tv_sec */ - st %r1,4(%r3) /* store tp->tv_nsec */ - lhi %r2,0 - ahi %r15,16 - CFI_DEF_CFA_OFFSET STACK_FRAME_OVERHEAD - CFI_RESTORE 15 - br %r14 - - /* Fallback to system call */ - CFI_DEF_CFA_OFFSET STACK_FRAME_OVERHEAD+16 - CFI_VAL_OFFSET 15, -STACK_FRAME_OVERHEAD -19: lhi %r1,__NR_clock_gettime - svc 0 - ahi %r15,16 - CFI_DEF_CFA_OFFSET STACK_FRAME_OVERHEAD - CFI_RESTORE 15 - br %r14 - CFI_ENDPROC - -20: .long 1000000000 -21: .long _vdso_data - 0b - .size __kernel_clock_gettime,.-__kernel_clock_gettime diff --git a/arch/s390/kernel/vdso32/getcpu.S b/arch/s390/kernel/vdso32/getcpu.S deleted file mode 100644 index 25515f3fbcea..000000000000 --- a/arch/s390/kernel/vdso32/getcpu.S +++ /dev/null @@ -1,33 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Userland implementation of getcpu() for 32 bits processes in a - * s390 kernel for use in the vDSO - * - * Copyright IBM Corp. 2016 - * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com> - */ -#include <asm/vdso.h> -#include <asm/asm-offsets.h> -#include <asm/dwarf.h> - - .text - .align 4 - .globl __kernel_getcpu - .type __kernel_getcpu,@function -__kernel_getcpu: - CFI_STARTPROC - la %r4,0 - sacf 256 - l %r5,__VDSO_CPU_NR(%r4) - l %r4,__VDSO_NODE_ID(%r4) - sacf 0 - ltr %r2,%r2 - jz 2f - st %r5,0(%r2) -2: ltr %r3,%r3 - jz 3f - st %r4,0(%r3) -3: lhi %r2,0 - br %r14 - CFI_ENDPROC - .size __kernel_getcpu,.-__kernel_getcpu diff --git a/arch/s390/kernel/vdso32/gettimeofday.S b/arch/s390/kernel/vdso32/gettimeofday.S deleted file mode 100644 index b23063fbc892..000000000000 --- a/arch/s390/kernel/vdso32/gettimeofday.S +++ /dev/null @@ -1,103 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Userland implementation of gettimeofday() for 32 bits processes in a - * s390 kernel for use in the vDSO - * - * Copyright IBM Corp. 2008 - * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com) - */ -#include <asm/vdso.h> -#include <asm/asm-offsets.h> -#include <asm/unistd.h> -#include <asm/dwarf.h> -#include <asm/ptrace.h> - - .text - .align 4 - .globl __kernel_gettimeofday - .type __kernel_gettimeofday,@function -__kernel_gettimeofday: - CFI_STARTPROC - ahi %r15,-16 - CFI_ADJUST_CFA_OFFSET 16 - CFI_VAL_OFFSET 15, -STACK_FRAME_OVERHEAD - basr %r5,0 -0: al %r5,13f-0b(%r5) /* get &_vdso_data */ -1: ltr %r3,%r3 /* check if tz is NULL */ - je 2f - mvc 0(8,%r3),__VDSO_TIMEZONE(%r5) -2: ltr %r2,%r2 /* check if tv is NULL */ - je 10f - l %r4,__VDSO_UPD_COUNT+4(%r5) /* load update counter */ - tml %r4,0x0001 /* pending update ? loop */ - jnz 1b - stcke 0(%r15) /* Store TOD clock */ - lm %r0,%r1,__VDSO_TS_END(%r5) /* TOD steering end time */ - s %r0,1(%r15) - sl %r1,5(%r15) - brc 3,14f - ahi %r0,-1 -14: ltr %r0,%r0 /* past end of steering? */ - jm 16f - srdl %r0,15 /* 1 per 2^16 */ - tm __VDSO_TS_DIR+3(%r5),0x01 /* steering direction? */ - jz 15f - lcr %r0,%r0 /* negative TOD offset */ - lcr %r1,%r1 - je 15f - ahi %r0,-1 -15: a %r0,1(%r15) /* add TOD timestamp */ - al %r1,5(%r15) - brc 12,17f - ahi %r0,1 - j 17f -16: lm %r0,%r1,1(%r15) /* load TOD timestamp */ -17: s %r0,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */ - sl %r1,__VDSO_XTIME_STAMP+4(%r5) - brc 3,3f - ahi %r0,-1 -3: ms %r0,__VDSO_TK_MULT(%r5) /* * tk->mult */ - st %r0,0(%r15) - l %r0,__VDSO_TK_MULT(%r5) - ltr %r1,%r1 - mr %r0,%r0 - jnm 4f - a %r0,__VDSO_TK_MULT(%r5) -4: al %r0,0(%r15) - al %r0,__VDSO_XTIME_NSEC(%r5) /* + xtime */ - al %r1,__VDSO_XTIME_NSEC+4(%r5) - brc 12,5f - ahi %r0,1 -5: mvc 0(4,%r15),__VDSO_XTIME_SEC+4(%r5) - cl %r4,__VDSO_UPD_COUNT+4(%r5) /* check update counter */ - jne 1b - l %r4,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */ - srdl %r0,0(%r4) /* >> tk->shift */ - l %r4,0(%r15) /* get tv_sec from stack */ - basr %r5,0 -6: ltr %r0,%r0 - jnz 7f - cl %r1,11f-6b(%r5) - jl 8f -7: ahi %r4,1 - sl %r1,11f-6b(%r5) - brc 3,6b - ahi %r0,-1 - j 6b -8: st %r4,0(%r2) /* store tv->tv_sec */ - ltr %r1,%r1 - m %r0,12f-6b(%r5) - jnm 9f - al %r0,12f-6b(%r5) -9: srl %r0,6 - st %r0,4(%r2) /* store tv->tv_usec */ -10: slr %r2,%r2 - ahi %r15,16 - CFI_ADJUST_CFA_OFFSET -16 - CFI_RESTORE 15 - br %r14 - CFI_ENDPROC -11: .long 1000000000 -12: .long 274877907 -13: .long _vdso_data - 0b - .size __kernel_gettimeofday,.-__kernel_gettimeofday diff --git a/arch/s390/kernel/vdso32/vdso32.lds.S b/arch/s390/kernel/vdso32/vdso32.lds.S deleted file mode 100644 index 721c4954cb6e..000000000000 --- a/arch/s390/kernel/vdso32/vdso32.lds.S +++ /dev/null @@ -1,142 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * This is the infamous ld script for the 32 bits vdso - * library - */ - -#include <asm/page.h> -#include <asm/vdso.h> - -OUTPUT_FORMAT("elf32-s390", "elf32-s390", "elf32-s390") -OUTPUT_ARCH(s390:31-bit) -ENTRY(_start) - -SECTIONS -{ - . = VDSO32_LBASE + SIZEOF_HEADERS; - - .hash : { *(.hash) } :text - .gnu.hash : { *(.gnu.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .gnu.version : { *(.gnu.version) } - .gnu.version_d : { *(.gnu.version_d) } - .gnu.version_r : { *(.gnu.version_r) } - - .note : { *(.note.*) } :text :note - - . = ALIGN(16); - .text : { - *(.text .stub .text.* .gnu.linkonce.t.*) - } :text - PROVIDE(__etext = .); - PROVIDE(_etext = .); - PROVIDE(etext = .); - - /* - * Other stuff is appended to the text segment: - */ - .rodata : { *(.rodata .rodata.* .gnu.linkonce.r.*) } - .rodata1 : { *(.rodata1) } - - .dynamic : { *(.dynamic) } :text :dynamic - - .eh_frame_hdr : { *(.eh_frame_hdr) } :text :eh_frame_hdr - .eh_frame : { KEEP (*(.eh_frame)) } :text - .gcc_except_table : { *(.gcc_except_table .gcc_except_table.*) } - - .rela.dyn ALIGN(8) : { *(.rela.dyn) } - .got ALIGN(8) : { *(.got .toc) } - - _end = .; - PROVIDE(end = .); - - /* - * Stabs debugging sections are here too. - */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - - /* - * DWARF debug sections. - * Symbols in the DWARF debugging sections are relative to the - * beginning of the section so we begin them at 0. - */ - /* DWARF 1 */ - .debug 0 : { *(.debug) } - .line 0 : { *(.line) } - /* GNU DWARF 1 extensions */ - .debug_srcinfo 0 : { *(.debug_srcinfo) } - .debug_sfnames 0 : { *(.debug_sfnames) } - /* DWARF 1.1 and DWARF 2 */ - .debug_aranges 0 : { *(.debug_aranges) } - .debug_pubnames 0 : { *(.debug_pubnames) } - /* DWARF 2 */ - .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_line 0 : { *(.debug_line) } - .debug_frame 0 : { *(.debug_frame) } - .debug_str 0 : { *(.debug_str) } - .debug_loc 0 : { *(.debug_loc) } - .debug_macinfo 0 : { *(.debug_macinfo) } - /* SGI/MIPS DWARF 2 extensions */ - .debug_weaknames 0 : { *(.debug_weaknames) } - .debug_funcnames 0 : { *(.debug_funcnames) } - .debug_typenames 0 : { *(.debug_typenames) } - .debug_varnames 0 : { *(.debug_varnames) } - /* DWARF 3 */ - .debug_pubtypes 0 : { *(.debug_pubtypes) } - .debug_ranges 0 : { *(.debug_ranges) } - .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) } - - . = ALIGN(PAGE_SIZE); - PROVIDE(_vdso_data = .); - - /DISCARD/ : { - *(.note.GNU-stack) - *(.branch_lt) - *(.data .data.* .gnu.linkonce.d.* .sdata*) - *(.bss .sbss .dynbss .dynsbss) - } -} - -/* - * Very old versions of ld do not recognize this name token; use the constant. - */ -#define PT_GNU_EH_FRAME 0x6474e550 - -/* - * We must supply the ELF program headers explicitly to get just one - * PT_LOAD segment, and set the flags explicitly to make segments read-only. - */ -PHDRS -{ - text PT_LOAD FILEHDR PHDRS FLAGS(5); /* PF_R|PF_X */ - dynamic PT_DYNAMIC FLAGS(4); /* PF_R */ - note PT_NOTE FLAGS(4); /* PF_R */ - eh_frame_hdr PT_GNU_EH_FRAME; -} - -/* - * This controls what symbols we export from the DSO. - */ -VERSION -{ - VDSO_VERSION_STRING { - global: - /* - * Has to be there for the kernel to find - */ - __kernel_gettimeofday; - __kernel_clock_gettime; - __kernel_clock_getres; - __kernel_getcpu; - - local: *; - }; -} diff --git a/arch/s390/kernel/vdso32/vdso32_wrapper.S b/arch/s390/kernel/vdso32/vdso32_wrapper.S deleted file mode 100644 index de2fb930471a..000000000000 --- a/arch/s390/kernel/vdso32/vdso32_wrapper.S +++ /dev/null @@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#include <linux/init.h> -#include <linux/linkage.h> -#include <asm/page.h> - - __PAGE_ALIGNED_DATA - - .globl vdso32_start, vdso32_end - .balign PAGE_SIZE -vdso32_start: - .incbin "arch/s390/kernel/vdso32/vdso32.so" - .balign PAGE_SIZE -vdso32_end: - - .previous diff --git a/arch/s390/kernel/vdso64/getcpu.S b/arch/s390/kernel/vdso64/getcpu.S index 2446e9dac8ab..3c04f7328500 100644 --- a/arch/s390/kernel/vdso64/getcpu.S +++ b/arch/s390/kernel/vdso64/getcpu.S @@ -16,10 +16,8 @@ .type __kernel_getcpu,@function __kernel_getcpu: CFI_STARTPROC - la %r4,0 sacf 256 - l %r5,__VDSO_CPU_NR(%r4) - l %r4,__VDSO_NODE_ID(%r4) + lm %r4,%r5,__VDSO_GETCPU_VAL(%r0) sacf 0 ltgr %r2,%r2 jz 2f diff --git a/arch/s390/lib/Makefile b/arch/s390/lib/Makefile index d7c218e8b559..28fd66d558ff 100644 --- a/arch/s390/lib/Makefile +++ b/arch/s390/lib/Makefile @@ -11,3 +11,6 @@ lib-$(CONFIG_UPROBES) += probes.o # Instrumenting memory accesses to __user data (in different address space) # produce false positives KASAN_SANITIZE_uaccess.o := n + +obj-$(CONFIG_S390_UNWIND_SELFTEST) += test_unwind.o +CFLAGS_test_unwind.o += -fno-optimize-sibling-calls diff --git a/arch/s390/lib/test_unwind.c b/arch/s390/lib/test_unwind.c new file mode 100644 index 000000000000..bda7ac0ddd29 --- /dev/null +++ b/arch/s390/lib/test_unwind.c @@ -0,0 +1,347 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Test module for unwind_for_each_frame + */ + +#define pr_fmt(fmt) "test_unwind: " fmt +#include <asm/unwind.h> +#include <linux/completion.h> +#include <linux/kallsyms.h> +#include <linux/kthread.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/kprobes.h> +#include <linux/wait.h> +#include <asm/irq.h> +#include <asm/delay.h> + +#define BT_BUF_SIZE (PAGE_SIZE * 4) + +/* + * To avoid printk line limit split backtrace by lines + */ +static void print_backtrace(char *bt) +{ + char *p; + + while (true) { + p = strsep(&bt, "\n"); + if (!p) + break; + pr_err("%s\n", p); + } +} + +/* + * Calls unwind_for_each_frame(task, regs, sp) and verifies that the result + * contains unwindme_func2 followed by unwindme_func1. + */ +static noinline int test_unwind(struct task_struct *task, struct pt_regs *regs, + unsigned long sp) +{ + int frame_count, prev_is_func2, seen_func2_func1; + const int max_frames = 128; + struct unwind_state state; + size_t bt_pos = 0; + int ret = 0; + char *bt; + + bt = kmalloc(BT_BUF_SIZE, GFP_ATOMIC); + if (!bt) { + pr_err("failed to allocate backtrace buffer\n"); + return -ENOMEM; + } + /* Unwind. */ + frame_count = 0; + prev_is_func2 = 0; + seen_func2_func1 = 0; + unwind_for_each_frame(&state, task, regs, sp) { + unsigned long addr = unwind_get_return_address(&state); + char sym[KSYM_SYMBOL_LEN]; + + if (frame_count++ == max_frames) + break; + if (state.reliable && !addr) { + pr_err("unwind state reliable but addr is 0\n"); + return -EINVAL; + } + sprint_symbol(sym, addr); + if (bt_pos < BT_BUF_SIZE) { + bt_pos += snprintf(bt + bt_pos, BT_BUF_SIZE - bt_pos, + state.reliable ? " [%-7s%px] %pSR\n" : + "([%-7s%px] %pSR)\n", + stack_type_name(state.stack_info.type), + (void *)state.sp, (void *)state.ip); + if (bt_pos >= BT_BUF_SIZE) + pr_err("backtrace buffer is too small\n"); + } + frame_count += 1; + if (prev_is_func2 && str_has_prefix(sym, "unwindme_func1")) + seen_func2_func1 = 1; + prev_is_func2 = str_has_prefix(sym, "unwindme_func2"); + } + + /* Check the results. */ + if (unwind_error(&state)) { + pr_err("unwind error\n"); + ret = -EINVAL; + } + if (!seen_func2_func1) { + pr_err("unwindme_func2 and unwindme_func1 not found\n"); + ret = -EINVAL; + } + if (frame_count == max_frames) { + pr_err("Maximum number of frames exceeded\n"); + ret = -EINVAL; + } + if (ret) + print_backtrace(bt); + kfree(bt); + return ret; +} + +/* State of the task being unwound. */ +struct unwindme { + int flags; + int ret; + struct task_struct *task; + struct completion task_ready; + wait_queue_head_t task_wq; + unsigned long sp; +}; + +static struct unwindme *unwindme; + +/* Values of unwindme.flags. */ +#define UWM_DEFAULT 0x0 +#define UWM_THREAD 0x1 /* Unwind a separate task. */ +#define UWM_REGS 0x2 /* Pass regs to test_unwind(). */ +#define UWM_SP 0x4 /* Pass sp to test_unwind(). */ +#define UWM_CALLER 0x8 /* Unwind starting from caller. */ +#define UWM_SWITCH_STACK 0x10 /* Use CALL_ON_STACK. */ +#define UWM_IRQ 0x20 /* Unwind from irq context. */ +#define UWM_PGM 0x40 /* Unwind from program check handler. */ + +static __always_inline unsigned long get_psw_addr(void) +{ + unsigned long psw_addr; + + asm volatile( + "basr %[psw_addr],0\n" + : [psw_addr] "=d" (psw_addr)); + return psw_addr; +} + +#ifdef CONFIG_KPROBES +static int pgm_pre_handler(struct kprobe *p, struct pt_regs *regs) +{ + struct unwindme *u = unwindme; + + u->ret = test_unwind(NULL, (u->flags & UWM_REGS) ? regs : NULL, + (u->flags & UWM_SP) ? u->sp : 0); + return 0; +} +#endif + +/* This function may or may not appear in the backtrace. */ +static noinline int unwindme_func4(struct unwindme *u) +{ + if (!(u->flags & UWM_CALLER)) + u->sp = current_frame_address(); + if (u->flags & UWM_THREAD) { + complete(&u->task_ready); + wait_event(u->task_wq, kthread_should_park()); + kthread_parkme(); + return 0; +#ifdef CONFIG_KPROBES + } else if (u->flags & UWM_PGM) { + struct kprobe kp; + int ret; + + unwindme = u; + memset(&kp, 0, sizeof(kp)); + kp.symbol_name = "do_report_trap"; + kp.pre_handler = pgm_pre_handler; + ret = register_kprobe(&kp); + if (ret < 0) { + pr_err("register_kprobe failed %d\n", ret); + return -EINVAL; + } + + /* + * trigger specification exception + */ + asm volatile( + " mvcl %%r1,%%r1\n" + "0: nopr %%r7\n" + EX_TABLE(0b, 0b) + :); + + unregister_kprobe(&kp); + unwindme = NULL; + return u->ret; +#endif + } else { + struct pt_regs regs; + + memset(®s, 0, sizeof(regs)); + regs.psw.addr = get_psw_addr(); + regs.gprs[15] = current_stack_pointer(); + return test_unwind(NULL, + (u->flags & UWM_REGS) ? ®s : NULL, + (u->flags & UWM_SP) ? u->sp : 0); + } +} + +/* This function may or may not appear in the backtrace. */ +static noinline int unwindme_func3(struct unwindme *u) +{ + u->sp = current_frame_address(); + return unwindme_func4(u); +} + +/* This function must appear in the backtrace. */ +static noinline int unwindme_func2(struct unwindme *u) +{ + int rc; + + if (u->flags & UWM_SWITCH_STACK) { + preempt_disable(); + rc = CALL_ON_STACK(unwindme_func3, S390_lowcore.nodat_stack, 1, u); + preempt_enable(); + return rc; + } else { + return unwindme_func3(u); + } +} + +/* This function must follow unwindme_func2 in the backtrace. */ +static noinline int unwindme_func1(void *u) +{ + return unwindme_func2((struct unwindme *)u); +} + +static void unwindme_irq_handler(struct ext_code ext_code, + unsigned int param32, + unsigned long param64) +{ + struct unwindme *u = READ_ONCE(unwindme); + + if (u && u->task == current) { + unwindme = NULL; + u->task = NULL; + u->ret = unwindme_func1(u); + } +} + +static int test_unwind_irq(struct unwindme *u) +{ + preempt_disable(); + if (register_external_irq(EXT_IRQ_CLK_COMP, unwindme_irq_handler)) { + pr_info("Couldn't reqister external interrupt handler"); + return -1; + } + u->task = current; + unwindme = u; + udelay(1); + unregister_external_irq(EXT_IRQ_CLK_COMP, unwindme_irq_handler); + preempt_enable(); + return u->ret; +} + +/* Spawns a task and passes it to test_unwind(). */ +static int test_unwind_task(struct unwindme *u) +{ + struct task_struct *task; + int ret; + + /* Initialize thread-related fields. */ + init_completion(&u->task_ready); + init_waitqueue_head(&u->task_wq); + + /* + * Start the task and wait until it reaches unwindme_func4() and sleeps + * in (task_ready, unwind_done] range. + */ + task = kthread_run(unwindme_func1, u, "%s", __func__); + if (IS_ERR(task)) { + pr_err("kthread_run() failed\n"); + return PTR_ERR(task); + } + /* + * Make sure task reaches unwindme_func4 before parking it, + * we might park it before kthread function has been executed otherwise + */ + wait_for_completion(&u->task_ready); + kthread_park(task); + /* Unwind. */ + ret = test_unwind(task, NULL, (u->flags & UWM_SP) ? u->sp : 0); + kthread_stop(task); + return ret; +} + +static int test_unwind_flags(int flags) +{ + struct unwindme u; + + u.flags = flags; + if (u.flags & UWM_THREAD) + return test_unwind_task(&u); + else if (u.flags & UWM_IRQ) + return test_unwind_irq(&u); + else + return unwindme_func1(&u); +} + +static int test_unwind_init(void) +{ + int ret = 0; + +#define TEST(flags) \ +do { \ + pr_info("[ RUN ] " #flags "\n"); \ + if (!test_unwind_flags((flags))) { \ + pr_info("[ OK ] " #flags "\n"); \ + } else { \ + pr_err("[ FAILED ] " #flags "\n"); \ + ret = -EINVAL; \ + } \ +} while (0) + + TEST(UWM_DEFAULT); + TEST(UWM_SP); + TEST(UWM_REGS); + TEST(UWM_SWITCH_STACK); + TEST(UWM_SP | UWM_REGS); + TEST(UWM_CALLER | UWM_SP); + TEST(UWM_CALLER | UWM_SP | UWM_REGS); + TEST(UWM_CALLER | UWM_SP | UWM_REGS | UWM_SWITCH_STACK); + TEST(UWM_THREAD); + TEST(UWM_THREAD | UWM_SP); + TEST(UWM_THREAD | UWM_CALLER | UWM_SP); + TEST(UWM_IRQ); + TEST(UWM_IRQ | UWM_SWITCH_STACK); + TEST(UWM_IRQ | UWM_SP); + TEST(UWM_IRQ | UWM_REGS); + TEST(UWM_IRQ | UWM_SP | UWM_REGS); + TEST(UWM_IRQ | UWM_CALLER | UWM_SP); + TEST(UWM_IRQ | UWM_CALLER | UWM_SP | UWM_REGS); + TEST(UWM_IRQ | UWM_CALLER | UWM_SP | UWM_REGS | UWM_SWITCH_STACK); +#ifdef CONFIG_KPROBES + TEST(UWM_PGM); + TEST(UWM_PGM | UWM_SP); + TEST(UWM_PGM | UWM_REGS); + TEST(UWM_PGM | UWM_SP | UWM_REGS); +#endif +#undef TEST + + return ret; +} + +static void test_unwind_exit(void) +{ +} + +module_init(test_unwind_init); +module_exit(test_unwind_exit); +MODULE_LICENSE("GPL"); diff --git a/arch/s390/mm/maccess.c b/arch/s390/mm/maccess.c index 59ad7997fed1..de7ca4b6718f 100644 --- a/arch/s390/mm/maccess.c +++ b/arch/s390/mm/maccess.c @@ -119,9 +119,15 @@ static unsigned long __no_sanitize_address _memcpy_real(unsigned long dest, */ int memcpy_real(void *dest, void *src, size_t count) { - if (S390_lowcore.nodat_stack != 0) - return CALL_ON_STACK(_memcpy_real, S390_lowcore.nodat_stack, - 3, dest, src, count); + int rc; + + if (S390_lowcore.nodat_stack != 0) { + preempt_disable(); + rc = CALL_ON_STACK(_memcpy_real, S390_lowcore.nodat_stack, 3, + dest, src, count); + preempt_enable(); + return rc; + } /* * This is a really early memcpy_real call, the stacks are * not set up yet. Just call _memcpy_real on the early boot diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c index c7fea9bea8cb..8e872951c07b 100644 --- a/arch/s390/pci/pci.c +++ b/arch/s390/pci/pci.c @@ -27,6 +27,7 @@ #include <linux/seq_file.h> #include <linux/jump_label.h> #include <linux/pci.h> +#include <linux/printk.h> #include <asm/isc.h> #include <asm/airq.h> @@ -43,7 +44,7 @@ static DECLARE_BITMAP(zpci_domain, ZPCI_NR_DEVICES); static DEFINE_SPINLOCK(zpci_domain_lock); #define ZPCI_IOMAP_ENTRIES \ - min(((unsigned long) ZPCI_NR_DEVICES * PCI_BAR_COUNT / 2), \ + min(((unsigned long) ZPCI_NR_DEVICES * PCI_STD_NUM_BARS / 2), \ ZPCI_IOMAP_MAX_ENTRIES) static DEFINE_SPINLOCK(zpci_iomap_lock); @@ -294,7 +295,7 @@ static void __iomem *pci_iomap_range_mio(struct pci_dev *pdev, int bar, void __iomem *pci_iomap_range(struct pci_dev *pdev, int bar, unsigned long offset, unsigned long max) { - if (!pci_resource_len(pdev, bar) || bar >= PCI_BAR_COUNT) + if (bar >= PCI_STD_NUM_BARS || !pci_resource_len(pdev, bar)) return NULL; if (static_branch_likely(&have_mio)) @@ -324,7 +325,7 @@ static void __iomem *pci_iomap_wc_range_mio(struct pci_dev *pdev, int bar, void __iomem *pci_iomap_wc_range(struct pci_dev *pdev, int bar, unsigned long offset, unsigned long max) { - if (!pci_resource_len(pdev, bar) || bar >= PCI_BAR_COUNT) + if (bar >= PCI_STD_NUM_BARS || !pci_resource_len(pdev, bar)) return NULL; if (static_branch_likely(&have_mio)) @@ -416,7 +417,7 @@ static void zpci_map_resources(struct pci_dev *pdev) resource_size_t len; int i; - for (i = 0; i < PCI_BAR_COUNT; i++) { + for (i = 0; i < PCI_STD_NUM_BARS; i++) { len = pci_resource_len(pdev, i); if (!len) continue; @@ -451,7 +452,7 @@ static void zpci_unmap_resources(struct pci_dev *pdev) if (zpci_use_mio(zdev)) return; - for (i = 0; i < PCI_BAR_COUNT; i++) { + for (i = 0; i < PCI_STD_NUM_BARS; i++) { len = pci_resource_len(pdev, i); if (!len) continue; @@ -514,7 +515,7 @@ static int zpci_setup_bus_resources(struct zpci_dev *zdev, snprintf(zdev->res_name, sizeof(zdev->res_name), "PCI Bus %04x:%02x", zdev->domain, ZPCI_BUS_NR); - for (i = 0; i < PCI_BAR_COUNT; i++) { + for (i = 0; i < PCI_STD_NUM_BARS; i++) { if (!zdev->bars[i].size) continue; entry = zpci_alloc_iomap(zdev); @@ -551,7 +552,7 @@ static void zpci_cleanup_bus_resources(struct zpci_dev *zdev) { int i; - for (i = 0; i < PCI_BAR_COUNT; i++) { + for (i = 0; i < PCI_STD_NUM_BARS; i++) { if (!zdev->bars[i].size || !zdev->bars[i].res) continue; @@ -573,7 +574,7 @@ int pcibios_add_device(struct pci_dev *pdev) pdev->dev.dma_ops = &s390_pci_dma_ops; zpci_map_resources(pdev); - for (i = 0; i < PCI_BAR_COUNT; i++) { + for (i = 0; i < PCI_STD_NUM_BARS; i++) { res = &pdev->resource[i]; if (res->parent || !res->flags) continue; @@ -659,6 +660,8 @@ static int zpci_alloc_domain(struct zpci_dev *zdev) spin_lock(&zpci_domain_lock); if (test_bit(zdev->domain, zpci_domain)) { spin_unlock(&zpci_domain_lock); + pr_err("Adding PCI function %08x failed because domain %04x is already assigned\n", + zdev->fid, zdev->domain); return -EEXIST; } set_bit(zdev->domain, zpci_domain); @@ -670,6 +673,8 @@ static int zpci_alloc_domain(struct zpci_dev *zdev) zdev->domain = find_first_zero_bit(zpci_domain, ZPCI_NR_DEVICES); if (zdev->domain == ZPCI_NR_DEVICES) { spin_unlock(&zpci_domain_lock); + pr_err("Adding PCI function %08x failed because the configured limit of %d is reached\n", + zdev->fid, ZPCI_NR_DEVICES); return -ENOSPC; } set_bit(zdev->domain, zpci_domain); diff --git a/arch/s390/pci/pci_clp.c b/arch/s390/pci/pci_clp.c index e585a62d6530..4c613e569fe0 100644 --- a/arch/s390/pci/pci_clp.c +++ b/arch/s390/pci/pci_clp.c @@ -145,7 +145,7 @@ static int clp_store_query_pci_fn(struct zpci_dev *zdev, { int i; - for (i = 0; i < PCI_BAR_COUNT; i++) { + for (i = 0; i < PCI_STD_NUM_BARS; i++) { zdev->bars[i].val = le32_to_cpu(response->bar[i]); zdev->bars[i].size = response->bar_size[i]; } @@ -164,8 +164,8 @@ static int clp_store_query_pci_fn(struct zpci_dev *zdev, sizeof(zdev->util_str)); } zdev->mio_capable = response->mio_addr_avail; - for (i = 0; i < PCI_BAR_COUNT; i++) { - if (!(response->mio.valid & (1 << (PCI_BAR_COUNT - i - 1)))) + for (i = 0; i < PCI_STD_NUM_BARS; i++) { + if (!(response->mio.valid & (1 << (PCI_STD_NUM_BARS - i - 1)))) continue; zdev->bars[i].mio_wb = (void __iomem *) response->mio.addr[i].wb; diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index acaa97459531..dd427bac5cde 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -371,20 +371,32 @@ static struct platform_device lcdc_device = { }, }; +static struct gpiod_lookup_table gpio_backlight_lookup = { + .dev_id = "gpio-backlight.0", + .table = { + GPIO_LOOKUP("sh7724_pfc", GPIO_PTR1, NULL, GPIO_ACTIVE_HIGH), + { } + }, +}; + +static struct property_entry gpio_backlight_props[] = { + PROPERTY_ENTRY_BOOL("default-on"), + { } +}; + static struct gpio_backlight_platform_data gpio_backlight_data = { .fbdev = &lcdc_device.dev, - .gpio = GPIO_PTR1, - .def_value = 1, - .name = "backlight", }; -static struct platform_device gpio_backlight_device = { +static const struct platform_device_info gpio_backlight_device_info = { .name = "gpio-backlight", - .dev = { - .platform_data = &gpio_backlight_data, - }, + .data = &gpio_backlight_data, + .size_data = sizeof(gpio_backlight_data), + .properties = gpio_backlight_props, }; +static struct platform_device *gpio_backlight_device; + /* CEU0 */ static struct ceu_platform_data ceu0_pdata = { .num_subdevs = 2, @@ -1006,7 +1018,6 @@ static struct platform_device *ecovec_devices[] __initdata = { &usb1_common_device, &usbhs_device, &lcdc_device, - &gpio_backlight_device, &keysc_device, &cn12_power, #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) @@ -1462,6 +1473,12 @@ static int __init arch_setup(void) #endif #endif + gpiod_add_lookup_table(&gpio_backlight_lookup); + gpio_backlight_device = platform_device_register_full( + &gpio_backlight_device_info); + if (IS_ERR(gpio_backlight_device)) + return PTR_ERR(gpio_backlight_device); + return platform_add_devices(ecovec_devices, ARRAY_SIZE(ecovec_devices)); } diff --git a/arch/sh/boot/compressed/misc.c b/arch/sh/boot/compressed/misc.c index c15cac9251b9..e69ec12cbbe6 100644 --- a/arch/sh/boot/compressed/misc.c +++ b/arch/sh/boot/compressed/misc.c @@ -111,6 +111,11 @@ void __stack_chk_fail(void) error("stack-protector: Kernel stack is corrupted\n"); } +/* Needed because vmlinux.lds.h references this */ +void ftrace_stub(void) +{ +} + #ifdef CONFIG_SUPERH64 #define stackalign 8 #else diff --git a/arch/sh/configs/rsk7264_defconfig b/arch/sh/configs/rsk7264_defconfig index 2b0572b497c1..78643191c99e 100644 --- a/arch/sh/configs/rsk7264_defconfig +++ b/arch/sh/configs/rsk7264_defconfig @@ -8,7 +8,6 @@ CONFIG_NAMESPACES=y CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y CONFIG_PERF_COUNTERS=y diff --git a/arch/sh/drivers/Makefile b/arch/sh/drivers/Makefile index 3e93b434e604..56b0acace6e7 100644 --- a/arch/sh/drivers/Makefile +++ b/arch/sh/drivers/Makefile @@ -3,7 +3,7 @@ # Makefile for the Linux SuperH-specific device drivers. # -obj-y += dma/ +obj-y += dma/ platform_early.o obj-$(CONFIG_PCI) += pci/ obj-$(CONFIG_SUPERHYWAY) += superhyway/ diff --git a/arch/sh/drivers/platform_early.c b/arch/sh/drivers/platform_early.c new file mode 100644 index 000000000000..f6d148451dfc --- /dev/null +++ b/arch/sh/drivers/platform_early.c @@ -0,0 +1,347 @@ +// SPDX--License-Identifier: GPL-2.0 + +#include <asm/platform_early.h> +#include <linux/mod_devicetable.h> +#include <linux/pm.h> + +static __initdata LIST_HEAD(sh_early_platform_driver_list); +static __initdata LIST_HEAD(sh_early_platform_device_list); + +static const struct platform_device_id * +platform_match_id(const struct platform_device_id *id, + struct platform_device *pdev) +{ + while (id->name[0]) { + if (strcmp(pdev->name, id->name) == 0) { + pdev->id_entry = id; + return id; + } + id++; + } + return NULL; +} + +static int platform_match(struct device *dev, struct device_driver *drv) +{ + struct platform_device *pdev = to_platform_device(dev); + struct platform_driver *pdrv = to_platform_driver(drv); + + /* When driver_override is set, only bind to the matching driver */ + if (pdev->driver_override) + return !strcmp(pdev->driver_override, drv->name); + + /* Then try to match against the id table */ + if (pdrv->id_table) + return platform_match_id(pdrv->id_table, pdev) != NULL; + + /* fall-back to driver name match */ + return (strcmp(pdev->name, drv->name) == 0); +} + +#ifdef CONFIG_PM +static void device_pm_init_common(struct device *dev) +{ + if (!dev->power.early_init) { + spin_lock_init(&dev->power.lock); + dev->power.qos = NULL; + dev->power.early_init = true; + } +} + +static void pm_runtime_early_init(struct device *dev) +{ + dev->power.disable_depth = 1; + device_pm_init_common(dev); +} +#else +static void pm_runtime_early_init(struct device *dev) {} +#endif + +/** + * sh_early_platform_driver_register - register early platform driver + * @epdrv: sh_early_platform driver structure + * @buf: string passed from early_param() + * + * Helper function for sh_early_platform_init() / sh_early_platform_init_buffer() + */ +int __init sh_early_platform_driver_register(struct sh_early_platform_driver *epdrv, + char *buf) +{ + char *tmp; + int n; + + /* Simply add the driver to the end of the global list. + * Drivers will by default be put on the list in compiled-in order. + */ + if (!epdrv->list.next) { + INIT_LIST_HEAD(&epdrv->list); + list_add_tail(&epdrv->list, &sh_early_platform_driver_list); + } + + /* If the user has specified device then make sure the driver + * gets prioritized. The driver of the last device specified on + * command line will be put first on the list. + */ + n = strlen(epdrv->pdrv->driver.name); + if (buf && !strncmp(buf, epdrv->pdrv->driver.name, n)) { + list_move(&epdrv->list, &sh_early_platform_driver_list); + + /* Allow passing parameters after device name */ + if (buf[n] == '\0' || buf[n] == ',') + epdrv->requested_id = -1; + else { + epdrv->requested_id = simple_strtoul(&buf[n + 1], + &tmp, 10); + + if (buf[n] != '.' || (tmp == &buf[n + 1])) { + epdrv->requested_id = EARLY_PLATFORM_ID_ERROR; + n = 0; + } else + n += strcspn(&buf[n + 1], ",") + 1; + } + + if (buf[n] == ',') + n++; + + if (epdrv->bufsize) { + memcpy(epdrv->buffer, &buf[n], + min_t(int, epdrv->bufsize, strlen(&buf[n]) + 1)); + epdrv->buffer[epdrv->bufsize - 1] = '\0'; + } + } + + return 0; +} + +/** + * sh_early_platform_add_devices - adds a number of early platform devices + * @devs: array of early platform devices to add + * @num: number of early platform devices in array + * + * Used by early architecture code to register early platform devices and + * their platform data. + */ +void __init sh_early_platform_add_devices(struct platform_device **devs, int num) +{ + struct device *dev; + int i; + + /* simply add the devices to list */ + for (i = 0; i < num; i++) { + dev = &devs[i]->dev; + + if (!dev->devres_head.next) { + pm_runtime_early_init(dev); + INIT_LIST_HEAD(&dev->devres_head); + list_add_tail(&dev->devres_head, + &sh_early_platform_device_list); + } + } +} + +/** + * sh_early_platform_driver_register_all - register early platform drivers + * @class_str: string to identify early platform driver class + * + * Used by architecture code to register all early platform drivers + * for a certain class. If omitted then only early platform drivers + * with matching kernel command line class parameters will be registered. + */ +void __init sh_early_platform_driver_register_all(char *class_str) +{ + /* The "class_str" parameter may or may not be present on the kernel + * command line. If it is present then there may be more than one + * matching parameter. + * + * Since we register our early platform drivers using early_param() + * we need to make sure that they also get registered in the case + * when the parameter is missing from the kernel command line. + * + * We use parse_early_options() to make sure the early_param() gets + * called at least once. The early_param() may be called more than + * once since the name of the preferred device may be specified on + * the kernel command line. sh_early_platform_driver_register() handles + * this case for us. + */ + parse_early_options(class_str); +} + +/** + * sh_early_platform_match - find early platform device matching driver + * @epdrv: early platform driver structure + * @id: id to match against + */ +static struct platform_device * __init +sh_early_platform_match(struct sh_early_platform_driver *epdrv, int id) +{ + struct platform_device *pd; + + list_for_each_entry(pd, &sh_early_platform_device_list, dev.devres_head) + if (platform_match(&pd->dev, &epdrv->pdrv->driver)) + if (pd->id == id) + return pd; + + return NULL; +} + +/** + * sh_early_platform_left - check if early platform driver has matching devices + * @epdrv: early platform driver structure + * @id: return true if id or above exists + */ +static int __init sh_early_platform_left(struct sh_early_platform_driver *epdrv, + int id) +{ + struct platform_device *pd; + + list_for_each_entry(pd, &sh_early_platform_device_list, dev.devres_head) + if (platform_match(&pd->dev, &epdrv->pdrv->driver)) + if (pd->id >= id) + return 1; + + return 0; +} + +/** + * sh_early_platform_driver_probe_id - probe drivers matching class_str and id + * @class_str: string to identify early platform driver class + * @id: id to match against + * @nr_probe: number of platform devices to successfully probe before exiting + */ +static int __init sh_early_platform_driver_probe_id(char *class_str, + int id, + int nr_probe) +{ + struct sh_early_platform_driver *epdrv; + struct platform_device *match; + int match_id; + int n = 0; + int left = 0; + + list_for_each_entry(epdrv, &sh_early_platform_driver_list, list) { + /* only use drivers matching our class_str */ + if (strcmp(class_str, epdrv->class_str)) + continue; + + if (id == -2) { + match_id = epdrv->requested_id; + left = 1; + + } else { + match_id = id; + left += sh_early_platform_left(epdrv, id); + + /* skip requested id */ + switch (epdrv->requested_id) { + case EARLY_PLATFORM_ID_ERROR: + case EARLY_PLATFORM_ID_UNSET: + break; + default: + if (epdrv->requested_id == id) + match_id = EARLY_PLATFORM_ID_UNSET; + } + } + + switch (match_id) { + case EARLY_PLATFORM_ID_ERROR: + pr_warn("%s: unable to parse %s parameter\n", + class_str, epdrv->pdrv->driver.name); + /* fall-through */ + case EARLY_PLATFORM_ID_UNSET: + match = NULL; + break; + default: + match = sh_early_platform_match(epdrv, match_id); + } + + if (match) { + /* + * Set up a sensible init_name to enable + * dev_name() and others to be used before the + * rest of the driver core is initialized. + */ + if (!match->dev.init_name && slab_is_available()) { + if (match->id != -1) + match->dev.init_name = + kasprintf(GFP_KERNEL, "%s.%d", + match->name, + match->id); + else + match->dev.init_name = + kasprintf(GFP_KERNEL, "%s", + match->name); + + if (!match->dev.init_name) + return -ENOMEM; + } + + if (epdrv->pdrv->probe(match)) + pr_warn("%s: unable to probe %s early.\n", + class_str, match->name); + else + n++; + } + + if (n >= nr_probe) + break; + } + + if (left) + return n; + else + return -ENODEV; +} + +/** + * sh_early_platform_driver_probe - probe a class of registered drivers + * @class_str: string to identify early platform driver class + * @nr_probe: number of platform devices to successfully probe before exiting + * @user_only: only probe user specified early platform devices + * + * Used by architecture code to probe registered early platform drivers + * within a certain class. For probe to happen a registered early platform + * device matching a registered early platform driver is needed. + */ +int __init sh_early_platform_driver_probe(char *class_str, + int nr_probe, + int user_only) +{ + int k, n, i; + + n = 0; + for (i = -2; n < nr_probe; i++) { + k = sh_early_platform_driver_probe_id(class_str, i, nr_probe - n); + + if (k < 0) + break; + + n += k; + + if (user_only) + break; + } + + return n; +} + +/** + * sh_early_platform_cleanup - clean up early platform code + */ +static int __init sh_early_platform_cleanup(void) +{ + struct platform_device *pd, *pd2; + + /* clean up the devres list used to chain devices */ + list_for_each_entry_safe(pd, pd2, &sh_early_platform_device_list, + dev.devres_head) { + list_del(&pd->dev.devres_head); + memset(&pd->dev.devres_head, 0, sizeof(pd->dev.devres_head)); + } + + return 0; +} +/* + * This must happen once after all early devices are probed but before probing + * real platform devices. + */ +subsys_initcall(sh_early_platform_cleanup); diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h index ac0561960c52..1495489225ac 100644 --- a/arch/sh/include/asm/io.h +++ b/arch/sh/include/asm/io.h @@ -267,7 +267,7 @@ unsigned long long poke_real_address_q(unsigned long long addr, #ifdef CONFIG_MMU void __iomem *__ioremap_caller(phys_addr_t offset, unsigned long size, pgprot_t prot, void *caller); -void __iounmap(void __iomem *addr); +void iounmap(void __iomem *addr); static inline void __iomem * __ioremap(phys_addr_t offset, unsigned long size, pgprot_t prot) @@ -328,7 +328,7 @@ __ioremap_mode(phys_addr_t offset, unsigned long size, pgprot_t prot) #else #define __ioremap(offset, size, prot) ((void __iomem *)(offset)) #define __ioremap_mode(offset, size, prot) ((void __iomem *)(offset)) -#define __iounmap(addr) do { } while (0) +#define iounmap(addr) do { } while (0) #endif /* CONFIG_MMU */ static inline void __iomem *ioremap(phys_addr_t offset, unsigned long size) @@ -370,11 +370,6 @@ static inline int iounmap_fixed(void __iomem *addr) { return -EINVAL; } #define ioremap_nocache ioremap #define ioremap_uc ioremap -static inline void iounmap(void __iomem *addr) -{ - __iounmap(addr); -} - /* * Convert a physical pointer to a virtual kernel pointer for /dev/mem * access diff --git a/arch/sh/include/asm/platform_early.h b/arch/sh/include/asm/platform_early.h new file mode 100644 index 000000000000..fc802137c37d --- /dev/null +++ b/arch/sh/include/asm/platform_early.h @@ -0,0 +1,61 @@ +/* SPDX--License-Identifier: GPL-2.0 */ + +#ifndef __PLATFORM_EARLY__ +#define __PLATFORM_EARLY__ + +#include <linux/types.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/slab.h> + +struct sh_early_platform_driver { + const char *class_str; + struct platform_driver *pdrv; + struct list_head list; + int requested_id; + char *buffer; + int bufsize; +}; + +#define EARLY_PLATFORM_ID_UNSET -2 +#define EARLY_PLATFORM_ID_ERROR -3 + +extern int sh_early_platform_driver_register(struct sh_early_platform_driver *epdrv, + char *buf); +extern void sh_early_platform_add_devices(struct platform_device **devs, int num); + +static inline int is_sh_early_platform_device(struct platform_device *pdev) +{ + return !pdev->dev.driver; +} + +extern void sh_early_platform_driver_register_all(char *class_str); +extern int sh_early_platform_driver_probe(char *class_str, + int nr_probe, int user_only); + +#define sh_early_platform_init(class_string, platdrv) \ + sh_early_platform_init_buffer(class_string, platdrv, NULL, 0) + +#ifndef MODULE +#define sh_early_platform_init_buffer(class_string, platdrv, buf, bufsiz) \ +static __initdata struct sh_early_platform_driver early_driver = { \ + .class_str = class_string, \ + .buffer = buf, \ + .bufsize = bufsiz, \ + .pdrv = platdrv, \ + .requested_id = EARLY_PLATFORM_ID_UNSET, \ +}; \ +static int __init sh_early_platform_driver_setup_func(char *buffer) \ +{ \ + return sh_early_platform_driver_register(&early_driver, buffer); \ +} \ +early_param(class_string, sh_early_platform_driver_setup_func) +#else /* MODULE */ +#define sh_early_platform_init_buffer(class_string, platdrv, buf, bufsiz) \ +static inline char *sh_early_platform_driver_setup_func(void) \ +{ \ + return bufsiz ? buf : NULL; \ +} +#endif /* MODULE */ + +#endif /* __PLATFORM_EARLY__ */ diff --git a/arch/sh/include/cpu-sh4/cpu/sh7734.h b/arch/sh/include/cpu-sh4/cpu/sh7734.h index 96f0246ad2f2..82b63208135a 100644 --- a/arch/sh/include/cpu-sh4/cpu/sh7734.h +++ b/arch/sh/include/cpu-sh4/cpu/sh7734.h @@ -134,7 +134,7 @@ enum { GPIO_FN_EX_WAIT1, GPIO_FN_SD1_DAT0_A, GPIO_FN_DREQ2, GPIO_FN_CAN1_TX_C, GPIO_FN_ET0_LINK_C, GPIO_FN_ET0_ETXD5_A, GPIO_FN_EX_WAIT0, GPIO_FN_TCLK1_B, - GPIO_FN_RD_WR, GPIO_FN_TCLK0, + GPIO_FN_RD_WR, GPIO_FN_TCLK0, GPIO_FN_CAN_CLK_B, GPIO_FN_ET0_ETXD4, GPIO_FN_EX_CS5, GPIO_FN_SD1_CMD_A, GPIO_FN_ATADIR, GPIO_FN_QSSL_B, GPIO_FN_ET0_ETXD3_A, GPIO_FN_EX_CS4, GPIO_FN_SD1_WP_A, GPIO_FN_ATAWR, GPIO_FN_QMI_QIO1_B, diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c index f5b6841ef7e1..b1c877b6a420 100644 --- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c +++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c @@ -12,6 +12,7 @@ #include <linux/sh_eth.h> #include <linux/sh_timer.h> #include <linux/io.h> +#include <asm/platform_early.h> enum { UNUSED = 0, @@ -199,6 +200,6 @@ void __init plat_early_device_setup(void) /* enable CMT clock */ __raw_writeb(__raw_readb(STBCR3) & ~0x10, STBCR3); - early_platform_add_devices(sh7619_early_devices, + sh_early_platform_add_devices(sh7619_early_devices, ARRAY_SIZE(sh7619_early_devices)); } diff --git a/arch/sh/kernel/cpu/sh2a/setup-mxg.c b/arch/sh/kernel/cpu/sh2a/setup-mxg.c index 52350ad0b0a2..cefa07924c16 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-mxg.c +++ b/arch/sh/kernel/cpu/sh2a/setup-mxg.c @@ -9,6 +9,7 @@ #include <linux/serial.h> #include <linux/serial_sci.h> #include <linux/sh_timer.h> +#include <asm/platform_early.h> enum { UNUSED = 0, @@ -169,6 +170,6 @@ static struct platform_device *mxg_early_devices[] __initdata = { void __init plat_early_device_setup(void) { - early_platform_add_devices(mxg_early_devices, + sh_early_platform_add_devices(mxg_early_devices, ARRAY_SIZE(mxg_early_devices)); } diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c index b51ed761ae08..28f1bebf3405 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c @@ -11,6 +11,7 @@ #include <linux/serial_sci.h> #include <linux/sh_timer.h> #include <linux/io.h> +#include <asm/platform_early.h> enum { UNUSED = 0, @@ -412,6 +413,6 @@ void __init plat_early_device_setup(void) /* enable MTU2 clock */ __raw_writeb(__raw_readb(STBCR3) & ~0x20, STBCR3); - early_platform_add_devices(sh7201_early_devices, + sh_early_platform_add_devices(sh7201_early_devices, ARRAY_SIZE(sh7201_early_devices)); } diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c index 89b3e49fc250..4839f3aaeb4c 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c @@ -10,6 +10,7 @@ #include <linux/serial_sci.h> #include <linux/sh_timer.h> #include <linux/io.h> +#include <asm/platform_early.h> enum { UNUSED = 0, @@ -349,6 +350,6 @@ void __init plat_early_device_setup(void) /* enable MTU2 clock */ __raw_writeb(__raw_readb(STBCR3) & ~0x20, STBCR3); - early_platform_add_devices(sh7203_early_devices, + sh_early_platform_add_devices(sh7203_early_devices, ARRAY_SIZE(sh7203_early_devices)); } diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c index 36ff3a3139da..68add5af4cc5 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c @@ -11,6 +11,7 @@ #include <linux/serial_sci.h> #include <linux/sh_timer.h> #include <linux/io.h> +#include <asm/platform_early.h> enum { UNUSED = 0, @@ -285,6 +286,6 @@ void __init plat_early_device_setup(void) /* enable MTU2 clock */ __raw_writeb(__raw_readb(STBCR3) & ~0x20, STBCR3); - early_platform_add_devices(sh7206_early_devices, + sh_early_platform_add_devices(sh7206_early_devices, ARRAY_SIZE(sh7206_early_devices)); } diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7264.c b/arch/sh/kernel/cpu/sh2a/setup-sh7264.c index d199618d877c..8a1cb613dd2e 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7264.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7264.c @@ -11,6 +11,7 @@ #include <linux/usb/r8a66597.h> #include <linux/sh_timer.h> #include <linux/io.h> +#include <asm/platform_early.h> enum { UNUSED = 0, @@ -546,6 +547,6 @@ static struct platform_device *sh7264_early_devices[] __initdata = { void __init plat_early_device_setup(void) { - early_platform_add_devices(sh7264_early_devices, + sh_early_platform_add_devices(sh7264_early_devices, ARRAY_SIZE(sh7264_early_devices)); } diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7269.c b/arch/sh/kernel/cpu/sh2a/setup-sh7269.c index 9095c960b455..8b1ef3028320 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7269.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7269.c @@ -12,6 +12,7 @@ #include <linux/usb/r8a66597.h> #include <linux/sh_timer.h> #include <linux/io.h> +#include <asm/platform_early.h> enum { UNUSED = 0, @@ -562,6 +563,6 @@ static struct platform_device *sh7269_early_devices[] __initdata = { void __init plat_early_device_setup(void) { - early_platform_add_devices(sh7269_early_devices, + sh_early_platform_add_devices(sh7269_early_devices, ARRAY_SIZE(sh7269_early_devices)); } diff --git a/arch/sh/kernel/cpu/sh3/setup-sh3.c b/arch/sh/kernel/cpu/sh3/setup-sh3.c index 8058c01cf09d..cf2a3f09fee4 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh3.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh3.c @@ -8,6 +8,7 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/io.h> +#include <asm/platform_early.h> /* All SH3 devices are equipped with IRQ0->5 (except sh7708) */ diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c index e19d1ce7b6ad..0544134b3f20 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c @@ -14,6 +14,7 @@ #include <linux/sh_intc.h> #include <asm/rtc.h> #include <cpu/serial.h> +#include <asm/platform_early.h> enum { UNUSED = 0, @@ -178,7 +179,7 @@ static struct platform_device *sh7705_early_devices[] __initdata = { void __init plat_early_device_setup(void) { - early_platform_add_devices(sh7705_early_devices, + sh_early_platform_add_devices(sh7705_early_devices, ARRAY_SIZE(sh7705_early_devices)); } diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c index 5c5144bee6bc..4947f57748bc 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c @@ -18,6 +18,7 @@ #include <linux/sh_timer.h> #include <linux/sh_intc.h> #include <cpu/serial.h> +#include <asm/platform_early.h> enum { UNUSED = 0, @@ -230,7 +231,7 @@ static struct platform_device *sh770x_early_devices[] __initdata = { void __init plat_early_device_setup(void) { - early_platform_add_devices(sh770x_early_devices, + sh_early_platform_add_devices(sh770x_early_devices, ARRAY_SIZE(sh770x_early_devices)); } diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c index 4776e2495738..381910761579 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c @@ -13,6 +13,7 @@ #include <linux/sh_timer.h> #include <linux/sh_intc.h> #include <asm/rtc.h> +#include <asm/platform_early.h> enum { UNUSED = 0, @@ -177,7 +178,7 @@ static struct platform_device *sh7710_early_devices[] __initdata = { void __init plat_early_device_setup(void) { - early_platform_add_devices(sh7710_early_devices, + sh_early_platform_add_devices(sh7710_early_devices, ARRAY_SIZE(sh7710_early_devices)); } diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c index 1d4c34e7b7db..425d067dae9b 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c @@ -19,6 +19,7 @@ #include <linux/sh_intc.h> #include <linux/usb/ohci_pdriver.h> #include <asm/rtc.h> +#include <asm/platform_early.h> #include <cpu/serial.h> static struct resource rtc_resources[] = { @@ -211,7 +212,7 @@ static struct platform_device *sh7720_early_devices[] __initdata = { void __init plat_early_device_setup(void) { - early_platform_add_devices(sh7720_early_devices, + sh_early_platform_add_devices(sh7720_early_devices, ARRAY_SIZE(sh7720_early_devices)); } diff --git a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c index a40ef35d101a..e6737f3d0df2 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c @@ -12,6 +12,7 @@ #include <linux/sh_timer.h> #include <linux/sh_intc.h> #include <linux/io.h> +#include <asm/platform_early.h> static struct plat_sci_port scif0_platform_data = { .scscr = SCSCR_REIE, @@ -76,7 +77,7 @@ static struct platform_device *sh4202_early_devices[] __initdata = { void __init plat_early_device_setup(void) { - early_platform_add_devices(sh4202_early_devices, + sh_early_platform_add_devices(sh4202_early_devices, ARRAY_SIZE(sh4202_early_devices)); } diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c index b37bda66a532..19c8f1d69071 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -13,6 +13,7 @@ #include <linux/sh_intc.h> #include <linux/serial_sci.h> #include <generated/machtypes.h> +#include <asm/platform_early.h> static struct resource rtc_resources[] = { [0] = { @@ -161,15 +162,15 @@ void __init plat_early_device_setup(void) if (mach_is_rts7751r2d()) { scif_platform_data.scscr |= SCSCR_CKE1; dev[0] = &scif_device; - early_platform_add_devices(dev, 1); + sh_early_platform_add_devices(dev, 1); } else { dev[0] = &sci_device; - early_platform_add_devices(dev, 1); + sh_early_platform_add_devices(dev, 1); dev[0] = &scif_device; - early_platform_add_devices(dev, 1); + sh_early_platform_add_devices(dev, 1); } - early_platform_add_devices(sh7750_early_devices, + sh_early_platform_add_devices(sh7750_early_devices, ARRAY_SIZE(sh7750_early_devices)); } diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c index 86845da85997..14212f5d803c 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c @@ -11,6 +11,7 @@ #include <linux/sh_intc.h> #include <linux/serial_sci.h> #include <linux/io.h> +#include <asm/platform_early.h> enum { UNUSED = 0, @@ -271,7 +272,7 @@ static struct platform_device *sh7760_early_devices[] __initdata = { void __init plat_early_device_setup(void) { - early_platform_add_devices(sh7760_early_devices, + sh_early_platform_add_devices(sh7760_early_devices, ARRAY_SIZE(sh7760_early_devices)); } diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c index a15e25690b5f..b6015188fab1 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c @@ -12,6 +12,7 @@ #include <linux/sh_timer.h> #include <linux/sh_intc.h> #include <asm/clock.h> +#include <asm/platform_early.h> /* Serial */ static struct plat_sci_port scif0_platform_data = { @@ -296,7 +297,7 @@ static struct platform_device *sh7343_early_devices[] __initdata = { void __init plat_early_device_setup(void) { - early_platform_add_devices(sh7343_early_devices, + sh_early_platform_add_devices(sh7343_early_devices, ARRAY_SIZE(sh7343_early_devices)); } diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c index 7bd2776441ba..6676beef053e 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c @@ -15,6 +15,7 @@ #include <linux/sh_intc.h> #include <linux/usb/r8a66597.h> #include <asm/clock.h> +#include <asm/platform_early.h> static struct plat_sci_port scif0_platform_data = { .scscr = SCSCR_REIE, @@ -240,7 +241,7 @@ static struct platform_device *sh7366_early_devices[] __initdata = { void __init plat_early_device_setup(void) { - early_platform_add_devices(sh7366_early_devices, + sh_early_platform_add_devices(sh7366_early_devices, ARRAY_SIZE(sh7366_early_devices)); } diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 1ce65f88f060..0c6757ef63f4 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -18,6 +18,7 @@ #include <asm/clock.h> #include <asm/mmzone.h> #include <asm/siu.h> +#include <asm/platform_early.h> #include <cpu/dma-register.h> #include <cpu/sh7722.h> @@ -512,7 +513,7 @@ static struct platform_device *sh7722_early_devices[] __initdata = { void __init plat_early_device_setup(void) { - early_platform_add_devices(sh7722_early_devices, + sh_early_platform_add_devices(sh7722_early_devices, ARRAY_SIZE(sh7722_early_devices)); } diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index edb649950662..83ae1ad4a86e 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -16,6 +16,7 @@ #include <linux/io.h> #include <asm/clock.h> #include <asm/mmzone.h> +#include <asm/platform_early.h> #include <cpu/sh7723.h> /* Serial */ @@ -410,7 +411,7 @@ static struct platform_device *sh7723_early_devices[] __initdata = { void __init plat_early_device_setup(void) { - early_platform_add_devices(sh7723_early_devices, + sh_early_platform_add_devices(sh7723_early_devices, ARRAY_SIZE(sh7723_early_devices)); } diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c index 3e9825031d3d..0d990ab1ba2a 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c @@ -24,6 +24,7 @@ #include <asm/suspend.h> #include <asm/clock.h> #include <asm/mmzone.h> +#include <asm/platform_early.h> #include <cpu/dma-register.h> #include <cpu/sh7724.h> @@ -830,7 +831,7 @@ static struct platform_device *sh7724_early_devices[] __initdata = { void __init plat_early_device_setup(void) { - early_platform_add_devices(sh7724_early_devices, + sh_early_platform_add_devices(sh7724_early_devices, ARRAY_SIZE(sh7724_early_devices)); } diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7734.c b/arch/sh/kernel/cpu/sh4a/setup-sh7734.c index 06a91569697a..9911da794358 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7734.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7734.c @@ -18,6 +18,7 @@ #include <linux/io.h> #include <asm/clock.h> #include <asm/irq.h> +#include <asm/platform_early.h> #include <cpu/sh7734.h> /* SCIF */ @@ -280,7 +281,7 @@ static struct platform_device *sh7734_early_devices[] __initdata = { void __init plat_early_device_setup(void) { - early_platform_add_devices(sh7734_early_devices, + sh_early_platform_add_devices(sh7734_early_devices, ARRAY_SIZE(sh7734_early_devices)); } diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c index 2501ce656511..67e330b7ea46 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c @@ -19,6 +19,7 @@ #include <linux/usb/ohci_pdriver.h> #include <cpu/dma-register.h> #include <cpu/sh7757.h> +#include <asm/platform_early.h> static struct plat_sci_port scif2_platform_data = { .scscr = SCSCR_REIE, @@ -767,7 +768,7 @@ static struct platform_device *sh7757_early_devices[] __initdata = { void __init plat_early_device_setup(void) { - early_platform_add_devices(sh7757_early_devices, + sh_early_platform_add_devices(sh7757_early_devices, ARRAY_SIZE(sh7757_early_devices)); } diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c index 419c5efe4a17..b0608664785f 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c @@ -14,6 +14,7 @@ #include <linux/io.h> #include <linux/serial_sci.h> #include <linux/usb/ohci_pdriver.h> +#include <asm/platform_early.h> static struct plat_sci_port scif0_platform_data = { .scscr = SCSCR_REIE, @@ -221,7 +222,7 @@ static struct platform_device *sh7763_early_devices[] __initdata = { void __init plat_early_device_setup(void) { - early_platform_add_devices(sh7763_early_devices, + sh_early_platform_add_devices(sh7763_early_devices, ARRAY_SIZE(sh7763_early_devices)); } diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c index 5fb4cf9b58c6..5efec6ceb04d 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c @@ -11,6 +11,7 @@ #include <linux/sh_timer.h> #include <linux/sh_intc.h> #include <linux/io.h> +#include <asm/platform_early.h> static struct plat_sci_port scif0_platform_data = { .scscr = SCSCR_REIE | SCSCR_TOIE, @@ -316,7 +317,7 @@ static struct platform_device *sh7770_early_devices[] __initdata = { void __init plat_early_device_setup(void) { - early_platform_add_devices(sh7770_early_devices, + sh_early_platform_add_devices(sh7770_early_devices, ARRAY_SIZE(sh7770_early_devices)); } diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c index ab7d6b715865..c818b788ecb0 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c @@ -13,6 +13,7 @@ #include <linux/sh_timer.h> #include <linux/sh_intc.h> #include <cpu/dma-register.h> +#include <asm/platform_early.h> static struct plat_sci_port scif0_platform_data = { .scscr = SCSCR_REIE | SCSCR_CKE1, @@ -285,7 +286,7 @@ void __init plat_early_device_setup(void) scif1_platform_data.scscr &= ~SCSCR_CKE1; } - early_platform_add_devices(sh7780_early_devices, + sh_early_platform_add_devices(sh7780_early_devices, ARRAY_SIZE(sh7780_early_devices)); } diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c index a438da47285d..3b4a414d60a9 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c @@ -14,6 +14,7 @@ #include <linux/sh_timer.h> #include <linux/sh_intc.h> #include <asm/mmzone.h> +#include <asm/platform_early.h> #include <cpu/dma-register.h> static struct plat_sci_port scif0_platform_data = { @@ -353,7 +354,7 @@ static struct platform_device *sh7785_early_devices[] __initdata = { void __init plat_early_device_setup(void) { - early_platform_add_devices(sh7785_early_devices, + sh_early_platform_add_devices(sh7785_early_devices, ARRAY_SIZE(sh7785_early_devices)); } diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c index d894165a0ef6..4b0db8259e3d 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c @@ -23,6 +23,7 @@ #include <linux/usb/ohci_pdriver.h> #include <cpu/dma-register.h> #include <asm/mmzone.h> +#include <asm/platform_early.h> static struct plat_sci_port scif0_platform_data = { .scscr = SCSCR_REIE | SCSCR_CKE1, @@ -834,6 +835,6 @@ arch_initcall(sh7786_devices_setup); void __init plat_early_device_setup(void) { - early_platform_add_devices(sh7786_early_devices, + sh_early_platform_add_devices(sh7786_early_devices, ARRAY_SIZE(sh7786_early_devices)); } diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c index 14aa4552bc45..7014d6d199b3 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-shx3.c +++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c @@ -14,6 +14,7 @@ #include <linux/sh_intc.h> #include <cpu/shx3.h> #include <asm/mmzone.h> +#include <asm/platform_early.h> /* * This intentionally only registers SCIF ports 0, 1, and 3. SCIF 2 @@ -152,7 +153,7 @@ arch_initcall(shx3_devices_setup); void __init plat_early_device_setup(void) { - early_platform_add_devices(shx3_early_devices, + sh_early_platform_add_devices(shx3_early_devices, ARRAY_SIZE(shx3_early_devices)); } diff --git a/arch/sh/kernel/cpu/sh5/setup-sh5.c b/arch/sh/kernel/cpu/sh5/setup-sh5.c index 41c1673afc0b..dc8476d67244 100644 --- a/arch/sh/kernel/cpu/sh5/setup-sh5.c +++ b/arch/sh/kernel/cpu/sh5/setup-sh5.c @@ -12,6 +12,7 @@ #include <linux/mm.h> #include <linux/sh_timer.h> #include <asm/addrspace.h> +#include <asm/platform_early.h> static struct plat_sci_port scif0_platform_data = { .flags = UPF_IOREMAP, @@ -115,6 +116,6 @@ arch_initcall(sh5_devices_setup); void __init plat_early_device_setup(void) { - early_platform_add_devices(sh5_early_devices, + sh_early_platform_add_devices(sh5_early_devices, ARRAY_SIZE(sh5_early_devices)); } diff --git a/arch/sh/kernel/cpu/shmobile/cpuidle.c b/arch/sh/kernel/cpu/shmobile/cpuidle.c index dbd2cdec2ddb..b0f9c8f8fd14 100644 --- a/arch/sh/kernel/cpu/shmobile/cpuidle.c +++ b/arch/sh/kernel/cpu/shmobile/cpuidle.c @@ -67,7 +67,7 @@ static struct cpuidle_driver cpuidle_driver = { .enter = cpuidle_sleep_enter, .name = "C2", .desc = "SuperH Sleep Mode [SF]", - .disabled = true, + .flags = CPUIDLE_FLAG_UNUSABLE, }, { .exit_latency = 2300, @@ -76,7 +76,7 @@ static struct cpuidle_driver cpuidle_driver = { .enter = cpuidle_sleep_enter, .name = "C3", .desc = "SuperH Mobile Standby Mode [SF]", - .disabled = true, + .flags = CPUIDLE_FLAG_UNUSABLE, }, }, .safe_state_index = 0, @@ -86,10 +86,10 @@ static struct cpuidle_driver cpuidle_driver = { int __init sh_mobile_setup_cpuidle(void) { if (sh_mobile_sleep_supported & SUSP_SH_SF) - cpuidle_driver.states[1].disabled = false; + cpuidle_driver.states[1].flags = CPUIDLE_FLAG_NONE; if (sh_mobile_sleep_supported & SUSP_SH_STANDBY) - cpuidle_driver.states[2].disabled = false; + cpuidle_driver.states[2].flags = CPUIDLE_FLAG_NONE; return cpuidle_register(&cpuidle_driver, NULL); } diff --git a/arch/sh/kernel/dma-coherent.c b/arch/sh/kernel/dma-coherent.c index b17514619b7e..eeb25a4fa55f 100644 --- a/arch/sh/kernel/dma-coherent.c +++ b/arch/sh/kernel/dma-coherent.c @@ -25,7 +25,7 @@ void *arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle, * Pages from the page allocator may have data present in * cache. So flush the cache before using uncached memory. */ - arch_sync_dma_for_device(dev, virt_to_phys(ret), size, + arch_sync_dma_for_device(virt_to_phys(ret), size, DMA_BIDIRECTIONAL); ret_nocache = (void __force *)ioremap_nocache(virt_to_phys(ret), size); @@ -59,8 +59,8 @@ void arch_dma_free(struct device *dev, size_t size, void *vaddr, iounmap(vaddr); } -void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_device(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { void *addr = sh_cacheop_vaddr(phys_to_virt(paddr)); diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 6ef341f6cfee..d232cfa01877 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -44,6 +44,7 @@ #include <asm/mmu_context.h> #include <asm/mmzone.h> #include <asm/sparsemem.h> +#include <asm/platform_early.h> /* * Initialize loops_per_jiffy as 10000000 (1000MIPS). @@ -328,7 +329,7 @@ void __init setup_arch(char **cmdline_p) sh_mv_setup(); /* Let earlyprintk output early console messages */ - early_platform_driver_probe("earlyprintk", 1, 1); + sh_early_platform_driver_probe("earlyprintk", 1, 1); #ifdef CONFIG_OF_FLATTREE #ifdef CONFIG_USE_BUILTIN_DTB diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c index e16b2cd269a3..821a09cbd605 100644 --- a/arch/sh/kernel/time.c +++ b/arch/sh/kernel/time.c @@ -18,6 +18,7 @@ #include <linux/rtc.h> #include <asm/clock.h> #include <asm/rtc.h> +#include <asm/platform_early.h> static void __init sh_late_time_init(void) { @@ -30,8 +31,8 @@ static void __init sh_late_time_init(void) * clocksource and the jiffies clocksource is used transparently * instead. No error handling is necessary here. */ - early_platform_driver_register_all("earlytimer"); - early_platform_driver_probe("earlytimer", 2, 0); + sh_early_platform_driver_register_all("earlytimer"); + sh_early_platform_driver_probe("earlytimer", 2, 0); } void __init time_init(void) diff --git a/arch/sh/mm/ioremap.c b/arch/sh/mm/ioremap.c index d09ddfe58fd8..f6d02246d665 100644 --- a/arch/sh/mm/ioremap.c +++ b/arch/sh/mm/ioremap.c @@ -103,7 +103,7 @@ static inline int iomapping_nontranslatable(unsigned long offset) return 0; } -void __iounmap(void __iomem *addr) +void iounmap(void __iomem *addr) { unsigned long vaddr = (unsigned long __force)addr; struct vm_struct *p; @@ -134,4 +134,4 @@ void __iounmap(void __iomem *addr) kfree(p); } -EXPORT_SYMBOL(__iounmap); +EXPORT_SYMBOL(iounmap); diff --git a/arch/sparc/include/asm/Kbuild b/arch/sparc/include/asm/Kbuild index b6212164847b..62de2eb2773d 100644 --- a/arch/sparc/include/asm/Kbuild +++ b/arch/sparc/include/asm/Kbuild @@ -18,7 +18,6 @@ generic-y += mcs_spinlock.h generic-y += mm-arch-hooks.h generic-y += mmiowb.h generic-y += module.h -generic-y += msi.h generic-y += preempt.h generic-y += serial.h generic-y += trace_clock.h diff --git a/arch/sparc/include/asm/io_32.h b/arch/sparc/include/asm/io_32.h index df2dc1784673..9a52d9506f80 100644 --- a/arch/sparc/include/asm/io_32.h +++ b/arch/sparc/include/asm/io_32.h @@ -127,6 +127,7 @@ static inline void sbus_memcpy_toio(volatile void __iomem *dst, * Bus number may be embedded in the higher bits of the physical address. * This is why we have no bus number argument to ioremap(). */ +void __iomem *ioremap(phys_addr_t offset, size_t size); void iounmap(volatile void __iomem *addr); /* Create a virtual mapping cookie for an IO port range */ void __iomem *ioport_map(unsigned long port, unsigned int nr); diff --git a/arch/sparc/include/asm/io_64.h b/arch/sparc/include/asm/io_64.h index 688911051b44..f4afa301954a 100644 --- a/arch/sparc/include/asm/io_64.h +++ b/arch/sparc/include/asm/io_64.h @@ -407,6 +407,7 @@ static inline void __iomem *ioremap(unsigned long offset, unsigned long size) } #define ioremap_nocache(X,Y) ioremap((X),(Y)) +#define ioremap_uc(X,Y) ioremap((X),(Y)) #define ioremap_wc(X,Y) ioremap((X),(Y)) #define ioremap_wt(X,Y) ioremap((X),(Y)) diff --git a/arch/sparc/include/asm/pgalloc_32.h b/arch/sparc/include/asm/pgalloc_32.h index 10538a4d1a1e..eae0c92ec422 100644 --- a/arch/sparc/include/asm/pgalloc_32.h +++ b/arch/sparc/include/asm/pgalloc_32.h @@ -26,14 +26,14 @@ static inline void free_pgd_fast(pgd_t *pgd) #define pgd_free(mm, pgd) free_pgd_fast(pgd) #define pgd_alloc(mm) get_pgd_fast() -static inline void pgd_set(pgd_t * pgdp, pmd_t * pmdp) +static inline void pud_set(pud_t * pudp, pmd_t * pmdp) { unsigned long pa = __nocache_pa(pmdp); - set_pte((pte_t *)pgdp, __pte((SRMMU_ET_PTD | (pa >> 4)))); + set_pte((pte_t *)pudp, __pte((SRMMU_ET_PTD | (pa >> 4)))); } -#define pgd_populate(MM, PGD, PMD) pgd_set(PGD, PMD) +#define pud_populate(MM, PGD, PMD) pud_set(PGD, PMD) static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address) diff --git a/arch/sparc/include/asm/pgtable_32.h b/arch/sparc/include/asm/pgtable_32.h index 31da44826645..6d6f44c0cad9 100644 --- a/arch/sparc/include/asm/pgtable_32.h +++ b/arch/sparc/include/asm/pgtable_32.h @@ -12,7 +12,7 @@ #include <linux/const.h> #ifndef __ASSEMBLY__ -#include <asm-generic/4level-fixup.h> +#include <asm-generic/pgtable-nopud.h> #include <linux/spinlock.h> #include <linux/mm_types.h> @@ -132,12 +132,12 @@ static inline struct page *pmd_page(pmd_t pmd) return pfn_to_page((pmd_val(pmd) & SRMMU_PTD_PMASK) >> (PAGE_SHIFT-4)); } -static inline unsigned long pgd_page_vaddr(pgd_t pgd) +static inline unsigned long pud_page_vaddr(pud_t pud) { - if (srmmu_device_memory(pgd_val(pgd))) { + if (srmmu_device_memory(pud_val(pud))) { return ~0; } else { - unsigned long v = pgd_val(pgd) & SRMMU_PTD_PMASK; + unsigned long v = pud_val(pud) & SRMMU_PTD_PMASK; return (unsigned long)__nocache_va(v << 4); } } @@ -184,24 +184,24 @@ static inline void pmd_clear(pmd_t *pmdp) set_pte((pte_t *)&pmdp->pmdv[i], __pte(0)); } -static inline int pgd_none(pgd_t pgd) +static inline int pud_none(pud_t pud) { - return !(pgd_val(pgd) & 0xFFFFFFF); + return !(pud_val(pud) & 0xFFFFFFF); } -static inline int pgd_bad(pgd_t pgd) +static inline int pud_bad(pud_t pud) { - return (pgd_val(pgd) & SRMMU_ET_MASK) != SRMMU_ET_PTD; + return (pud_val(pud) & SRMMU_ET_MASK) != SRMMU_ET_PTD; } -static inline int pgd_present(pgd_t pgd) +static inline int pud_present(pud_t pud) { - return ((pgd_val(pgd) & SRMMU_ET_MASK) == SRMMU_ET_PTD); + return ((pud_val(pud) & SRMMU_ET_MASK) == SRMMU_ET_PTD); } -static inline void pgd_clear(pgd_t *pgdp) +static inline void pud_clear(pud_t *pudp) { - set_pte((pte_t *)pgdp, __pte(0)); + set_pte((pte_t *)pudp, __pte(0)); } /* @@ -319,9 +319,9 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) #define pgd_offset_k(address) pgd_offset(&init_mm, address) /* Find an entry in the second-level page table.. */ -static inline pmd_t *pmd_offset(pgd_t * dir, unsigned long address) +static inline pmd_t *pmd_offset(pud_t * dir, unsigned long address) { - return (pmd_t *) pgd_page_vaddr(*dir) + + return (pmd_t *) pud_page_vaddr(*dir) + ((address >> PMD_SHIFT) & (PTRS_PER_PMD - 1)); } diff --git a/arch/sparc/include/uapi/asm/ipcbuf.h b/arch/sparc/include/uapi/asm/ipcbuf.h index 9d0d125500e2..5b933a598a33 100644 --- a/arch/sparc/include/uapi/asm/ipcbuf.h +++ b/arch/sparc/include/uapi/asm/ipcbuf.h @@ -2,6 +2,8 @@ #ifndef __SPARC_IPCBUF_H #define __SPARC_IPCBUF_H +#include <linux/posix_types.h> + /* * The ipc64_perm structure for sparc/sparc64 architecture. * Note extra padding because this structure is passed back and forth diff --git a/arch/sparc/include/uapi/asm/msgbuf.h b/arch/sparc/include/uapi/asm/msgbuf.h index ffc46c211d6d..0954552da188 100644 --- a/arch/sparc/include/uapi/asm/msgbuf.h +++ b/arch/sparc/include/uapi/asm/msgbuf.h @@ -2,6 +2,8 @@ #ifndef _SPARC_MSGBUF_H #define _SPARC_MSGBUF_H +#include <asm/ipcbuf.h> + /* * The msqid64_ds structure for sparc64 architecture. * Note extra padding because this structure is passed back and forth @@ -13,9 +15,9 @@ struct msqid64_ds { struct ipc64_perm msg_perm; #if defined(__sparc__) && defined(__arch64__) - __kernel_time_t msg_stime; /* last msgsnd time */ - __kernel_time_t msg_rtime; /* last msgrcv time */ - __kernel_time_t msg_ctime; /* last change time */ + long msg_stime; /* last msgsnd time */ + long msg_rtime; /* last msgrcv time */ + long msg_ctime; /* last change time */ #else unsigned long msg_stime_high; unsigned long msg_stime; /* last msgsnd time */ diff --git a/arch/sparc/include/uapi/asm/sembuf.h b/arch/sparc/include/uapi/asm/sembuf.h index f3d309c2e1cd..10621d066d79 100644 --- a/arch/sparc/include/uapi/asm/sembuf.h +++ b/arch/sparc/include/uapi/asm/sembuf.h @@ -2,6 +2,8 @@ #ifndef _SPARC_SEMBUF_H #define _SPARC_SEMBUF_H +#include <asm/ipcbuf.h> + /* * The semid64_ds structure for sparc architecture. * Note extra padding because this structure is passed back and forth @@ -14,8 +16,8 @@ struct semid64_ds { struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ #if defined(__sparc__) && defined(__arch64__) - __kernel_time_t sem_otime; /* last semop time */ - __kernel_time_t sem_ctime; /* last change time */ + long sem_otime; /* last semop time */ + long sem_ctime; /* last change time */ #else unsigned long sem_otime_high; unsigned long sem_otime; /* last semop time */ diff --git a/arch/sparc/include/uapi/asm/shmbuf.h b/arch/sparc/include/uapi/asm/shmbuf.h index 06618b84822d..a5d7d8d681c4 100644 --- a/arch/sparc/include/uapi/asm/shmbuf.h +++ b/arch/sparc/include/uapi/asm/shmbuf.h @@ -14,9 +14,9 @@ struct shmid64_ds { struct ipc64_perm shm_perm; /* operation perms */ #if defined(__sparc__) && defined(__arch64__) - __kernel_time_t shm_atime; /* last attach time */ - __kernel_time_t shm_dtime; /* last detach time */ - __kernel_time_t shm_ctime; /* last change time */ + long shm_atime; /* last attach time */ + long shm_dtime; /* last detach time */ + long shm_ctime; /* last change time */ #else unsigned long shm_atime_high; unsigned long shm_atime; /* last attach time */ diff --git a/arch/sparc/include/uapi/asm/stat.h b/arch/sparc/include/uapi/asm/stat.h index b6ec4eb217f7..732c41720e24 100644 --- a/arch/sparc/include/uapi/asm/stat.h +++ b/arch/sparc/include/uapi/asm/stat.h @@ -14,12 +14,12 @@ struct stat { uid_t st_uid; gid_t st_gid; unsigned int st_rdev; - off_t st_size; - time_t st_atime; - time_t st_mtime; - time_t st_ctime; - off_t st_blksize; - off_t st_blocks; + long st_size; + long st_atime; + long st_mtime; + long st_ctime; + long st_blksize; + long st_blocks; unsigned long __unused4[2]; }; @@ -57,15 +57,15 @@ struct stat { unsigned short st_uid; unsigned short st_gid; unsigned short st_rdev; - off_t st_size; - time_t st_atime; + long st_size; + long st_atime; unsigned long st_atime_nsec; - time_t st_mtime; + long st_mtime; unsigned long st_mtime_nsec; - time_t st_ctime; + long st_ctime; unsigned long st_ctime_nsec; - off_t st_blksize; - off_t st_blocks; + long st_blksize; + long st_blocks; unsigned long __unused4[2]; }; diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c index f89603855f1e..e59461d03b9a 100644 --- a/arch/sparc/kernel/ioport.c +++ b/arch/sparc/kernel/ioport.c @@ -366,8 +366,8 @@ void arch_dma_free(struct device *dev, size_t size, void *cpu_addr, /* IIep is write-through, not flushing on cpu to device transfer. */ -void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { if (dir != PCI_DMA_TODEVICE) dma_make_coherent(paddr, PAGE_ALIGN(size)); diff --git a/arch/sparc/mm/fault_32.c b/arch/sparc/mm/fault_32.c index 8d69de111470..89976c9b936c 100644 --- a/arch/sparc/mm/fault_32.c +++ b/arch/sparc/mm/fault_32.c @@ -351,6 +351,8 @@ vmalloc_fault: */ int offset = pgd_index(address); pgd_t *pgd, *pgd_k; + p4d_t *p4d, *p4d_k; + pud_t *pud, *pud_k; pmd_t *pmd, *pmd_k; pgd = tsk->active_mm->pgd + offset; @@ -363,8 +365,13 @@ vmalloc_fault: return; } - pmd = pmd_offset(pgd, address); - pmd_k = pmd_offset(pgd_k, address); + p4d = p4d_offset(pgd, address); + pud = pud_offset(p4d, address); + pmd = pmd_offset(pud, address); + + p4d_k = p4d_offset(pgd_k, address); + pud_k = pud_offset(p4d_k, address); + pmd_k = pmd_offset(pud_k, address); if (pmd_present(*pmd) || !pmd_present(*pmd_k)) goto bad_area_nosemaphore; diff --git a/arch/sparc/mm/highmem.c b/arch/sparc/mm/highmem.c index 86bc2a58d26c..d4a80adea7e5 100644 --- a/arch/sparc/mm/highmem.c +++ b/arch/sparc/mm/highmem.c @@ -39,10 +39,14 @@ static pte_t *kmap_pte; void __init kmap_init(void) { unsigned long address; + p4d_t *p4d; + pud_t *pud; pmd_t *dir; address = __fix_to_virt(FIX_KMAP_BEGIN); - dir = pmd_offset(pgd_offset_k(address), address); + p4d = p4d_offset(pgd_offset_k(address), address); + pud = pud_offset(p4d, address); + dir = pmd_offset(pud, address); /* cache the first kmap pte */ kmap_pte = pte_offset_kernel(dir, address); diff --git a/arch/sparc/mm/io-unit.c b/arch/sparc/mm/io-unit.c index f770ee7229d8..33a0facd9eb5 100644 --- a/arch/sparc/mm/io-unit.c +++ b/arch/sparc/mm/io-unit.c @@ -239,12 +239,16 @@ static void *iounit_alloc(struct device *dev, size_t len, page = va; { pgd_t *pgdp; + p4d_t *p4dp; + pud_t *pudp; pmd_t *pmdp; pte_t *ptep; long i; pgdp = pgd_offset(&init_mm, addr); - pmdp = pmd_offset(pgdp, addr); + p4dp = p4d_offset(pgdp, addr); + pudp = pud_offset(p4dp, addr); + pmdp = pmd_offset(pudp, addr); ptep = pte_offset_map(pmdp, addr); set_pte(ptep, mk_pte(virt_to_page(page), dvma_prot)); diff --git a/arch/sparc/mm/iommu.c b/arch/sparc/mm/iommu.c index 71ac353032b6..4d3c6991f0ae 100644 --- a/arch/sparc/mm/iommu.c +++ b/arch/sparc/mm/iommu.c @@ -343,6 +343,8 @@ static void *sbus_iommu_alloc(struct device *dev, size_t len, page = va; { pgd_t *pgdp; + p4d_t *p4dp; + pud_t *pudp; pmd_t *pmdp; pte_t *ptep; @@ -354,7 +356,9 @@ static void *sbus_iommu_alloc(struct device *dev, size_t len, __flush_page_to_ram(page); pgdp = pgd_offset(&init_mm, addr); - pmdp = pmd_offset(pgdp, addr); + p4dp = p4d_offset(pgdp, addr); + pudp = pud_offset(p4dp, addr); + pmdp = pmd_offset(pudp, addr); ptep = pte_offset_map(pmdp, addr); set_pte(ptep, mk_pte(virt_to_page(page), dvma_prot)); diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c index cc3ad64479ac..f56c3c9a9793 100644 --- a/arch/sparc/mm/srmmu.c +++ b/arch/sparc/mm/srmmu.c @@ -296,6 +296,8 @@ static void __init srmmu_nocache_init(void) void *srmmu_nocache_bitmap; unsigned int bitmap_bits; pgd_t *pgd; + p4d_t *p4d; + pud_t *pud; pmd_t *pmd; pte_t *pte; unsigned long paddr, vaddr; @@ -329,6 +331,8 @@ static void __init srmmu_nocache_init(void) while (vaddr < srmmu_nocache_end) { pgd = pgd_offset_k(vaddr); + p4d = p4d_offset(__nocache_fix(pgd), vaddr); + pud = pud_offset(__nocache_fix(p4d), vaddr); pmd = pmd_offset(__nocache_fix(pgd), vaddr); pte = pte_offset_kernel(__nocache_fix(pmd), vaddr); @@ -516,13 +520,17 @@ static inline void srmmu_mapioaddr(unsigned long physaddr, unsigned long virt_addr, int bus_type) { pgd_t *pgdp; + p4d_t *p4dp; + pud_t *pudp; pmd_t *pmdp; pte_t *ptep; unsigned long tmp; physaddr &= PAGE_MASK; pgdp = pgd_offset_k(virt_addr); - pmdp = pmd_offset(pgdp, virt_addr); + p4dp = p4d_offset(pgdp, virt_addr); + pudp = pud_offset(p4dp, virt_addr); + pmdp = pmd_offset(pudp, virt_addr); ptep = pte_offset_kernel(pmdp, virt_addr); tmp = (physaddr >> 4) | SRMMU_ET_PTE; @@ -551,11 +559,16 @@ void srmmu_mapiorange(unsigned int bus, unsigned long xpa, static inline void srmmu_unmapioaddr(unsigned long virt_addr) { pgd_t *pgdp; + p4d_t *p4dp; + pud_t *pudp; pmd_t *pmdp; pte_t *ptep; + pgdp = pgd_offset_k(virt_addr); - pmdp = pmd_offset(pgdp, virt_addr); + p4dp = p4d_offset(pgdp, virt_addr); + pudp = pud_offset(p4dp, virt_addr); + pmdp = pmd_offset(pudp, virt_addr); ptep = pte_offset_kernel(pmdp, virt_addr); /* No need to flush uncacheable page. */ @@ -693,20 +706,24 @@ static void __init srmmu_early_allocate_ptable_skeleton(unsigned long start, unsigned long end) { pgd_t *pgdp; + p4d_t *p4dp; + pud_t *pudp; pmd_t *pmdp; pte_t *ptep; while (start < end) { pgdp = pgd_offset_k(start); - if (pgd_none(*(pgd_t *)__nocache_fix(pgdp))) { + p4dp = p4d_offset(pgdp, start); + pudp = pud_offset(p4dp, start); + if (pud_none(*(pud_t *)__nocache_fix(pudp))) { pmdp = __srmmu_get_nocache( SRMMU_PMD_TABLE_SIZE, SRMMU_PMD_TABLE_SIZE); if (pmdp == NULL) early_pgtable_allocfail("pmd"); memset(__nocache_fix(pmdp), 0, SRMMU_PMD_TABLE_SIZE); - pgd_set(__nocache_fix(pgdp), pmdp); + pud_set(__nocache_fix(pudp), pmdp); } - pmdp = pmd_offset(__nocache_fix(pgdp), start); + pmdp = pmd_offset(__nocache_fix(pudp), start); if (srmmu_pmd_none(*(pmd_t *)__nocache_fix(pmdp))) { ptep = __srmmu_get_nocache(PTE_SIZE, PTE_SIZE); if (ptep == NULL) @@ -724,19 +741,23 @@ static void __init srmmu_allocate_ptable_skeleton(unsigned long start, unsigned long end) { pgd_t *pgdp; + p4d_t *p4dp; + pud_t *pudp; pmd_t *pmdp; pte_t *ptep; while (start < end) { pgdp = pgd_offset_k(start); - if (pgd_none(*pgdp)) { + p4dp = p4d_offset(pgdp, start); + pudp = pud_offset(p4dp, start); + if (pud_none(*pudp)) { pmdp = __srmmu_get_nocache(SRMMU_PMD_TABLE_SIZE, SRMMU_PMD_TABLE_SIZE); if (pmdp == NULL) early_pgtable_allocfail("pmd"); memset(pmdp, 0, SRMMU_PMD_TABLE_SIZE); - pgd_set(pgdp, pmdp); + pud_set((pud_t *)pgdp, pmdp); } - pmdp = pmd_offset(pgdp, start); + pmdp = pmd_offset(pudp, start); if (srmmu_pmd_none(*pmdp)) { ptep = __srmmu_get_nocache(PTE_SIZE, PTE_SIZE); @@ -779,6 +800,8 @@ static void __init srmmu_inherit_prom_mappings(unsigned long start, unsigned long probed; unsigned long addr; pgd_t *pgdp; + p4d_t *p4dp; + pud_t *pudp; pmd_t *pmdp; pte_t *ptep; int what; /* 0 = normal-pte, 1 = pmd-level pte, 2 = pgd-level pte */ @@ -810,18 +833,20 @@ static void __init srmmu_inherit_prom_mappings(unsigned long start, } pgdp = pgd_offset_k(start); + p4dp = p4d_offset(pgdp, start); + pudp = pud_offset(p4dp, start); if (what == 2) { *(pgd_t *)__nocache_fix(pgdp) = __pgd(probed); start += SRMMU_PGDIR_SIZE; continue; } - if (pgd_none(*(pgd_t *)__nocache_fix(pgdp))) { + if (pud_none(*(pud_t *)__nocache_fix(pudp))) { pmdp = __srmmu_get_nocache(SRMMU_PMD_TABLE_SIZE, SRMMU_PMD_TABLE_SIZE); if (pmdp == NULL) early_pgtable_allocfail("pmd"); memset(__nocache_fix(pmdp), 0, SRMMU_PMD_TABLE_SIZE); - pgd_set(__nocache_fix(pgdp), pmdp); + pud_set(__nocache_fix(pudp), pmdp); } pmdp = pmd_offset(__nocache_fix(pgdp), start); if (srmmu_pmd_none(*(pmd_t *)__nocache_fix(pmdp))) { @@ -906,6 +931,8 @@ void __init srmmu_paging_init(void) phandle cpunode; char node_str[128]; pgd_t *pgd; + p4d_t *p4d; + pud_t *pud; pmd_t *pmd; pte_t *pte; unsigned long pages_avail; @@ -967,7 +994,9 @@ void __init srmmu_paging_init(void) srmmu_allocate_ptable_skeleton(PKMAP_BASE, PKMAP_END); pgd = pgd_offset_k(PKMAP_BASE); - pmd = pmd_offset(pgd, PKMAP_BASE); + p4d = p4d_offset(pgd, PKMAP_BASE); + pud = pud_offset(p4d, PKMAP_BASE); + pmd = pmd_offset(pud, PKMAP_BASE); pte = pte_offset_kernel(pmd, PKMAP_BASE); pkmap_page_table = pte; diff --git a/arch/sparc/vdso/vclock_gettime.c b/arch/sparc/vdso/vclock_gettime.c index fc5bdd14de76..e794edde6755 100644 --- a/arch/sparc/vdso/vclock_gettime.c +++ b/arch/sparc/vdso/vclock_gettime.c @@ -63,7 +63,7 @@ notrace static __always_inline struct vvar_data *get_vvar_data(void) return (struct vvar_data *) ret; } -notrace static long vdso_fallback_gettime(long clock, struct timespec *ts) +notrace static long vdso_fallback_gettime(long clock, struct __kernel_old_timespec *ts) { register long num __asm__("g1") = __NR_clock_gettime; register long o0 __asm__("o0") = clock; @@ -74,7 +74,7 @@ notrace static long vdso_fallback_gettime(long clock, struct timespec *ts) return o0; } -notrace static long vdso_fallback_gettimeofday(struct timeval *tv, struct timezone *tz) +notrace static long vdso_fallback_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz) { register long num __asm__("g1") = __NR_gettimeofday; register long o0 __asm__("o0") = (long) tv; @@ -144,7 +144,7 @@ notrace static __always_inline u64 vgetsns_stick(struct vvar_data *vvar) } notrace static __always_inline int do_realtime(struct vvar_data *vvar, - struct timespec *ts) + struct __kernel_old_timespec *ts) { unsigned long seq; u64 ns; @@ -164,7 +164,7 @@ notrace static __always_inline int do_realtime(struct vvar_data *vvar, } notrace static __always_inline int do_realtime_stick(struct vvar_data *vvar, - struct timespec *ts) + struct __kernel_old_timespec *ts) { unsigned long seq; u64 ns; @@ -184,7 +184,7 @@ notrace static __always_inline int do_realtime_stick(struct vvar_data *vvar, } notrace static __always_inline int do_monotonic(struct vvar_data *vvar, - struct timespec *ts) + struct __kernel_old_timespec *ts) { unsigned long seq; u64 ns; @@ -204,7 +204,7 @@ notrace static __always_inline int do_monotonic(struct vvar_data *vvar, } notrace static __always_inline int do_monotonic_stick(struct vvar_data *vvar, - struct timespec *ts) + struct __kernel_old_timespec *ts) { unsigned long seq; u64 ns; @@ -224,7 +224,7 @@ notrace static __always_inline int do_monotonic_stick(struct vvar_data *vvar, } notrace static int do_realtime_coarse(struct vvar_data *vvar, - struct timespec *ts) + struct __kernel_old_timespec *ts) { unsigned long seq; @@ -237,7 +237,7 @@ notrace static int do_realtime_coarse(struct vvar_data *vvar, } notrace static int do_monotonic_coarse(struct vvar_data *vvar, - struct timespec *ts) + struct __kernel_old_timespec *ts) { unsigned long seq; @@ -251,7 +251,7 @@ notrace static int do_monotonic_coarse(struct vvar_data *vvar, } notrace int -__vdso_clock_gettime(clockid_t clock, struct timespec *ts) +__vdso_clock_gettime(clockid_t clock, struct __kernel_old_timespec *ts) { struct vvar_data *vvd = get_vvar_data(); @@ -275,11 +275,11 @@ __vdso_clock_gettime(clockid_t clock, struct timespec *ts) return vdso_fallback_gettime(clock, ts); } int -clock_gettime(clockid_t, struct timespec *) +clock_gettime(clockid_t, struct __kernel_old_timespec *) __attribute__((weak, alias("__vdso_clock_gettime"))); notrace int -__vdso_clock_gettime_stick(clockid_t clock, struct timespec *ts) +__vdso_clock_gettime_stick(clockid_t clock, struct __kernel_old_timespec *ts) { struct vvar_data *vvd = get_vvar_data(); @@ -304,15 +304,15 @@ __vdso_clock_gettime_stick(clockid_t clock, struct timespec *ts) } notrace int -__vdso_gettimeofday(struct timeval *tv, struct timezone *tz) +__vdso_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz) { struct vvar_data *vvd = get_vvar_data(); if (likely(vvd->vclock_mode != VCLOCK_NONE)) { if (likely(tv != NULL)) { union tstv_t { - struct timespec ts; - struct timeval tv; + struct __kernel_old_timespec ts; + struct __kernel_old_timeval tv; } *tstv = (union tstv_t *) tv; do_realtime(vvd, &tstv->ts); /* @@ -336,19 +336,19 @@ __vdso_gettimeofday(struct timeval *tv, struct timezone *tz) return vdso_fallback_gettimeofday(tv, tz); } int -gettimeofday(struct timeval *, struct timezone *) +gettimeofday(struct __kernel_old_timeval *, struct timezone *) __attribute__((weak, alias("__vdso_gettimeofday"))); notrace int -__vdso_gettimeofday_stick(struct timeval *tv, struct timezone *tz) +__vdso_gettimeofday_stick(struct __kernel_old_timeval *tv, struct timezone *tz) { struct vvar_data *vvd = get_vvar_data(); if (likely(vvd->vclock_mode != VCLOCK_NONE)) { if (likely(tv != NULL)) { union tstv_t { - struct timespec ts; - struct timeval tv; + struct __kernel_old_timespec ts; + struct __kernel_old_timeval tv; } *tstv = (union tstv_t *) tv; do_realtime_stick(vvd, &tstv->ts); /* diff --git a/arch/um/Kconfig b/arch/um/Kconfig index fec6b4ca2b6e..2a6d04fcb3e9 100644 --- a/arch/um/Kconfig +++ b/arch/um/Kconfig @@ -153,7 +153,7 @@ config KERNEL_STACK_ORDER It is possible to reduce the stack to 1 for 64BIT and 0 for 32BIT on older (pre-2017) CPUs. It is not recommended on newer CPUs due to the increase in the size of the state which needs to be saved when handling - signals. + signals. config MMAPPER tristate "iomem emulation driver" diff --git a/arch/um/drivers/Kconfig b/arch/um/drivers/Kconfig index fea5a0d522dc..388096fb45a2 100644 --- a/arch/um/drivers/Kconfig +++ b/arch/um/drivers/Kconfig @@ -337,7 +337,7 @@ config UML_NET_SLIRP endmenu config VIRTIO_UML - tristate "UML driver for virtio devices" + bool "UML driver for virtio devices" select VIRTIO help This driver provides support for virtio based paravirtual device diff --git a/arch/um/drivers/harddog_kern.c b/arch/um/drivers/harddog_kern.c index 000cb69ba0bc..e6d4f43deba8 100644 --- a/arch/um/drivers/harddog_kern.c +++ b/arch/um/drivers/harddog_kern.c @@ -165,6 +165,7 @@ static const struct file_operations harddog_fops = { .owner = THIS_MODULE, .write = harddog_write, .unlocked_ioctl = harddog_ioctl, + .compat_ioctl = compat_ptr_ioctl, .open = harddog_open, .release = harddog_release, .llseek = no_llseek, diff --git a/arch/um/drivers/hostaudio_kern.c b/arch/um/drivers/hostaudio_kern.c index bf75b1ceac47..d35d3f305a31 100644 --- a/arch/um/drivers/hostaudio_kern.c +++ b/arch/um/drivers/hostaudio_kern.c @@ -298,6 +298,7 @@ static const struct file_operations hostaudio_fops = { .write = hostaudio_write, .poll = hostaudio_poll, .unlocked_ioctl = hostaudio_ioctl, + .compat_ioctl = compat_ptr_ioctl, .mmap = NULL, .open = hostaudio_open, .release = hostaudio_release, diff --git a/arch/um/drivers/vector_kern.c b/arch/um/drivers/vector_kern.c index 769ffbd9e9a6..92617e16829e 100644 --- a/arch/um/drivers/vector_kern.c +++ b/arch/um/drivers/vector_kern.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2017 - Cambridge Greys Limited + * Copyright (C) 2017 - 2019 Cambridge Greys Limited * Copyright (C) 2011 - 2014 Cisco Systems Inc * Copyright (C) 2001 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com) * Copyright (C) 2001 Lennert Buytenhek (buytenh@gnu.org) and @@ -21,6 +21,9 @@ #include <linux/skbuff.h> #include <linux/slab.h> #include <linux/interrupt.h> +#include <linux/firmware.h> +#include <linux/fs.h> +#include <uapi/linux/filter.h> #include <init.h> #include <irq_kern.h> #include <irq_user.h> @@ -128,6 +131,23 @@ static int get_mtu(struct arglist *def) return ETH_MAX_PACKET; } +static char *get_bpf_file(struct arglist *def) +{ + return uml_vector_fetch_arg(def, "bpffile"); +} + +static bool get_bpf_flash(struct arglist *def) +{ + char *allow = uml_vector_fetch_arg(def, "bpfflash"); + long result; + + if (allow != NULL) { + if (kstrtoul(allow, 10, &result) == 0) + return (allow > 0); + } + return false; +} + static int get_depth(struct arglist *def) { char *mtu = uml_vector_fetch_arg(def, "depth"); @@ -176,6 +196,7 @@ static int get_transport_options(struct arglist *def) int vec_rx = VECTOR_RX; int vec_tx = VECTOR_TX; long parsed; + int result = 0; if (vector != NULL) { if (kstrtoul(vector, 10, &parsed) == 0) { @@ -186,14 +207,16 @@ static int get_transport_options(struct arglist *def) } } + if (get_bpf_flash(def)) + result = VECTOR_BPF_FLASH; if (strncmp(transport, TRANS_TAP, TRANS_TAP_LEN) == 0) - return 0; + return result; if (strncmp(transport, TRANS_HYBRID, TRANS_HYBRID_LEN) == 0) - return (vec_rx | VECTOR_BPF); + return (result | vec_rx | VECTOR_BPF); if (strncmp(transport, TRANS_RAW, TRANS_RAW_LEN) == 0) - return (vec_rx | vec_tx | VECTOR_QDISC_BYPASS); - return (vec_rx | vec_tx); + return (result | vec_rx | vec_tx | VECTOR_QDISC_BYPASS); + return (result | vec_rx | vec_tx); } @@ -1139,6 +1162,8 @@ static int vector_net_close(struct net_device *dev) } tasklet_kill(&vp->tx_poll); if (vp->fds->rx_fd > 0) { + if (vp->bpf) + uml_vector_detach_bpf(vp->fds->rx_fd, vp->bpf); os_close_file(vp->fds->rx_fd); vp->fds->rx_fd = -1; } @@ -1146,7 +1171,10 @@ static int vector_net_close(struct net_device *dev) os_close_file(vp->fds->tx_fd); vp->fds->tx_fd = -1; } + if (vp->bpf != NULL) + kfree(vp->bpf->filter); kfree(vp->bpf); + vp->bpf = NULL; kfree(vp->fds->remote_addr); kfree(vp->transport_data); kfree(vp->header_rxbuffer); @@ -1181,6 +1209,7 @@ static void vector_reset_tx(struct work_struct *work) netif_start_queue(vp->dev); netif_wake_queue(vp->dev); } + static int vector_net_open(struct net_device *dev) { struct vector_private *vp = netdev_priv(dev); @@ -1196,6 +1225,8 @@ static int vector_net_open(struct net_device *dev) vp->opened = true; spin_unlock_irqrestore(&vp->lock, flags); + vp->bpf = uml_vector_user_bpf(get_bpf_file(vp->parsed)); + vp->fds = uml_vector_user_open(vp->unit, vp->parsed); if (vp->fds == NULL) @@ -1267,8 +1298,11 @@ static int vector_net_open(struct net_device *dev) if (!uml_raw_enable_qdisc_bypass(vp->fds->rx_fd)) vp->options |= VECTOR_BPF; } - if ((vp->options & VECTOR_BPF) != 0) - vp->bpf = uml_vector_default_bpf(vp->fds->rx_fd, dev->dev_addr); + if (((vp->options & VECTOR_BPF) != 0) && (vp->bpf == NULL)) + vp->bpf = uml_vector_default_bpf(dev->dev_addr); + + if (vp->bpf != NULL) + uml_vector_attach_bpf(vp->fds->rx_fd, vp->bpf); netif_start_queue(dev); @@ -1347,6 +1381,65 @@ static void vector_net_get_drvinfo(struct net_device *dev, strlcpy(info->version, DRIVER_VERSION, sizeof(info->version)); } +static int vector_net_load_bpf_flash(struct net_device *dev, + struct ethtool_flash *efl) +{ + struct vector_private *vp = netdev_priv(dev); + struct vector_device *vdevice; + const struct firmware *fw; + int result = 0; + + if (!(vp->options & VECTOR_BPF_FLASH)) { + netdev_err(dev, "loading firmware not permitted: %s\n", efl->data); + return -1; + } + + spin_lock(&vp->lock); + + if (vp->bpf != NULL) { + if (vp->opened) + uml_vector_detach_bpf(vp->fds->rx_fd, vp->bpf); + kfree(vp->bpf->filter); + vp->bpf->filter = NULL; + } else { + vp->bpf = kmalloc(sizeof(struct sock_fprog), GFP_KERNEL); + if (vp->bpf == NULL) { + netdev_err(dev, "failed to allocate memory for firmware\n"); + goto flash_fail; + } + } + + vdevice = find_device(vp->unit); + + if (request_firmware(&fw, efl->data, &vdevice->pdev.dev)) + goto flash_fail; + + vp->bpf->filter = kmemdup(fw->data, fw->size, GFP_KERNEL); + if (!vp->bpf->filter) + goto free_buffer; + + vp->bpf->len = fw->size / sizeof(struct sock_filter); + release_firmware(fw); + + if (vp->opened) + result = uml_vector_attach_bpf(vp->fds->rx_fd, vp->bpf); + + spin_unlock(&vp->lock); + + return result; + +free_buffer: + release_firmware(fw); + +flash_fail: + spin_unlock(&vp->lock); + if (vp->bpf != NULL) + kfree(vp->bpf->filter); + kfree(vp->bpf); + vp->bpf = NULL; + return -1; +} + static void vector_get_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring) { @@ -1424,6 +1517,7 @@ static const struct ethtool_ops vector_net_ethtool_ops = { .get_ethtool_stats = vector_get_ethtool_stats, .get_coalesce = vector_get_coalesce, .set_coalesce = vector_set_coalesce, + .flash_device = vector_net_load_bpf_flash, }; @@ -1528,8 +1622,9 @@ static void vector_eth_configure( .in_write_poll = false, .coalesce = 2, .req_size = get_req_size(def), - .in_error = false - }); + .in_error = false, + .bpf = NULL + }); dev->features = dev->hw_features = (NETIF_F_SG | NETIF_F_FRAGLIST); tasklet_init(&vp->tx_poll, vector_tx_poll, (unsigned long)vp); diff --git a/arch/um/drivers/vector_kern.h b/arch/um/drivers/vector_kern.h index 4d292e6c07af..d0159082faf0 100644 --- a/arch/um/drivers/vector_kern.h +++ b/arch/um/drivers/vector_kern.h @@ -29,10 +29,13 @@ #define VECTOR_TX (1 << 1) #define VECTOR_BPF (1 << 2) #define VECTOR_QDISC_BYPASS (1 << 3) +#define VECTOR_BPF_FLASH (1 << 4) #define ETH_MAX_PACKET 1500 #define ETH_HEADER_OTHER 32 /* just in case someone decides to go mad on QnQ */ +#define MAX_FILTER_PROG (2 << 16) + struct vector_queue { struct mmsghdr *mmsg_vector; void **skbuff_vector; @@ -118,10 +121,13 @@ struct vector_private { bool in_write_poll; bool in_error; + /* guest allowed to use ethtool flash to load bpf */ + bool bpf_via_flash; + /* ethtool stats */ struct vector_estats estats; - void *bpf; + struct sock_fprog *bpf; char user[0]; }; diff --git a/arch/um/drivers/vector_user.c b/arch/um/drivers/vector_user.c index e2c969b9f7ee..ddcd917be0af 100644 --- a/arch/um/drivers/vector_user.c +++ b/arch/um/drivers/vector_user.c @@ -46,7 +46,8 @@ #define TUN_GET_F_FAIL "tapraw: TUNGETFEATURES failed: %s" #define L2TPV3_BIND_FAIL "l2tpv3_open : could not bind socket err=%i" #define UNIX_BIND_FAIL "unix_open : could not bind socket err=%i" -#define BPF_ATTACH_FAIL "Failed to attach filter size %d to %d, err %d\n" +#define BPF_ATTACH_FAIL "Failed to attach filter size %d prog %px to %d, err %d\n" +#define BPF_DETACH_FAIL "Failed to detach filter size %d prog %px to %d, err %d\n" #define MAX_UN_LEN 107 @@ -660,31 +661,44 @@ int uml_vector_recvmmsg( else return -errno; } -int uml_vector_attach_bpf(int fd, void *bpf, int bpf_len) +int uml_vector_attach_bpf(int fd, void *bpf) { - int err = setsockopt(fd, SOL_SOCKET, SO_ATTACH_FILTER, bpf, bpf_len); + struct sock_fprog *prog = bpf; + + int err = setsockopt(fd, SOL_SOCKET, SO_ATTACH_FILTER, bpf, sizeof(struct sock_fprog)); if (err < 0) - printk(KERN_ERR BPF_ATTACH_FAIL, bpf_len, fd, -errno); + printk(KERN_ERR BPF_ATTACH_FAIL, prog->len, prog->filter, fd, -errno); return err; } -#define DEFAULT_BPF_LEN 6 +int uml_vector_detach_bpf(int fd, void *bpf) +{ + struct sock_fprog *prog = bpf; -void *uml_vector_default_bpf(int fd, void *mac) + int err = setsockopt(fd, SOL_SOCKET, SO_DETACH_FILTER, bpf, sizeof(struct sock_fprog)); + if (err < 0) + printk(KERN_ERR BPF_DETACH_FAIL, prog->len, prog->filter, fd, -errno); + return err; +} +void *uml_vector_default_bpf(void *mac) { struct sock_filter *bpf; uint32_t *mac1 = (uint32_t *)(mac + 2); uint16_t *mac2 = (uint16_t *) mac; - struct sock_fprog bpf_prog = { - .len = 6, - .filter = NULL, - }; + struct sock_fprog *bpf_prog; + bpf_prog = uml_kmalloc(sizeof(struct sock_fprog), UM_GFP_KERNEL); + if (bpf_prog) { + bpf_prog->len = DEFAULT_BPF_LEN; + bpf_prog->filter = NULL; + } else { + return NULL; + } bpf = uml_kmalloc( sizeof(struct sock_filter) * DEFAULT_BPF_LEN, UM_GFP_KERNEL); - if (bpf != NULL) { - bpf_prog.filter = bpf; + if (bpf) { + bpf_prog->filter = bpf; /* ld [8] */ bpf[0] = (struct sock_filter){ 0x20, 0, 0, 0x00000008 }; /* jeq #0xMAC[2-6] jt 2 jf 5*/ @@ -697,12 +711,56 @@ void *uml_vector_default_bpf(int fd, void *mac) bpf[4] = (struct sock_filter){ 0x6, 0, 0, 0x00000000 }; /* ret #0x40000 */ bpf[5] = (struct sock_filter){ 0x6, 0, 0, 0x00040000 }; - if (uml_vector_attach_bpf( - fd, &bpf_prog, sizeof(struct sock_fprog)) < 0) { - kfree(bpf); - bpf = NULL; - } + } else { + kfree(bpf_prog); + bpf_prog = NULL; } - return bpf; + return bpf_prog; } +/* Note - this function requires a valid mac being passed as an arg */ + +void *uml_vector_user_bpf(char *filename) +{ + struct sock_filter *bpf; + struct sock_fprog *bpf_prog; + struct stat statbuf; + int res, ffd = -1; + + if (filename == NULL) + return NULL; + + if (stat(filename, &statbuf) < 0) { + printk(KERN_ERR "Error %d reading bpf file", -errno); + return false; + } + bpf_prog = uml_kmalloc(sizeof(struct sock_fprog), UM_GFP_KERNEL); + if (bpf_prog != NULL) { + bpf_prog->len = statbuf.st_size / sizeof(struct sock_filter); + bpf_prog->filter = NULL; + } + ffd = os_open_file(filename, of_read(OPENFLAGS()), 0); + if (ffd < 0) { + printk(KERN_ERR "Error %d opening bpf file", -errno); + goto bpf_failed; + } + bpf = uml_kmalloc(statbuf.st_size, UM_GFP_KERNEL); + if (bpf == NULL) { + printk(KERN_ERR "Failed to allocate bpf buffer"); + goto bpf_failed; + } + bpf_prog->filter = bpf; + res = os_read_file(ffd, bpf, statbuf.st_size); + if (res < statbuf.st_size) { + printk(KERN_ERR "Failed to read bpf program %s, error %d", filename, res); + kfree(bpf); + goto bpf_failed; + } + os_close_file(ffd); + return bpf_prog; +bpf_failed: + if (ffd > 0) + os_close_file(ffd); + kfree(bpf_prog); + return NULL; +} diff --git a/arch/um/drivers/vector_user.h b/arch/um/drivers/vector_user.h index 649ec250268b..91f35b266aba 100644 --- a/arch/um/drivers/vector_user.h +++ b/arch/um/drivers/vector_user.h @@ -28,6 +28,8 @@ #define TRANS_BESS "bess" #define TRANS_BESS_LEN strlen(TRANS_BESS) +#define DEFAULT_BPF_LEN 6 + #ifndef IPPROTO_GRE #define IPPROTO_GRE 0x2F #endif @@ -95,8 +97,10 @@ extern int uml_vector_recvmmsg( unsigned int vlen, unsigned int flags ); -extern void *uml_vector_default_bpf(int fd, void *mac); -extern int uml_vector_attach_bpf(int fd, void *bpf, int bpf_len); +extern void *uml_vector_default_bpf(void *mac); +extern void *uml_vector_user_bpf(char *filename); +extern int uml_vector_attach_bpf(int fd, void *bpf); +extern int uml_vector_detach_bpf(int fd, void *bpf); extern bool uml_raw_enable_qdisc_bypass(int fd); extern bool uml_raw_enable_vnet_headers(int fd); extern bool uml_tap_enable_vnet_headers(int fd); diff --git a/arch/um/drivers/virtio_uml.c b/arch/um/drivers/virtio_uml.c index fc8c52cff5aa..023ced2250ea 100644 --- a/arch/um/drivers/virtio_uml.c +++ b/arch/um/drivers/virtio_uml.c @@ -4,12 +4,12 @@ * * Copyright(c) 2019 Intel Corporation * - * This module allows virtio devices to be used over a vhost-user socket. + * This driver allows virtio devices to be used over a vhost-user socket. * * Guest devices can be instantiated by kernel module or command line * parameters. One device will be created for each parameter. Syntax: * - * [virtio_uml.]device=<socket>:<virtio_id>[:<platform_id>] + * virtio_uml.device=<socket>:<virtio_id>[:<platform_id>] * where: * <socket> := vhost-user socket path to connect * <virtio_id> := virtio device id (as in virtio_ids.h) @@ -42,6 +42,13 @@ #define to_virtio_uml_device(_vdev) \ container_of(_vdev, struct virtio_uml_device, vdev) +struct virtio_uml_platform_data { + u32 virtio_device_id; + const char *socket_path; + struct work_struct conn_broken_wk; + struct platform_device *pdev; +}; + struct virtio_uml_device { struct virtio_device vdev; struct platform_device *pdev; @@ -50,6 +57,7 @@ struct virtio_uml_device { u64 features; u64 protocol_features; u8 status; + u8 registered:1; }; struct virtio_uml_vq_info { @@ -83,7 +91,7 @@ static int full_sendmsg_fds(int fd, const void *buf, unsigned int len, return 0; } -static int full_read(int fd, void *buf, int len) +static int full_read(int fd, void *buf, int len, bool abortable) { int rc; @@ -93,7 +101,7 @@ static int full_read(int fd, void *buf, int len) buf += rc; len -= rc; } - } while (len && (rc > 0 || rc == -EINTR)); + } while (len && (rc > 0 || rc == -EINTR || (!abortable && rc == -EAGAIN))); if (rc < 0) return rc; @@ -104,28 +112,37 @@ static int full_read(int fd, void *buf, int len) static int vhost_user_recv_header(int fd, struct vhost_user_msg *msg) { - return full_read(fd, msg, sizeof(msg->header)); + return full_read(fd, msg, sizeof(msg->header), true); } -static int vhost_user_recv(int fd, struct vhost_user_msg *msg, +static int vhost_user_recv(struct virtio_uml_device *vu_dev, + int fd, struct vhost_user_msg *msg, size_t max_payload_size) { size_t size; int rc = vhost_user_recv_header(fd, msg); + if (rc == -ECONNRESET && vu_dev->registered) { + struct virtio_uml_platform_data *pdata; + + pdata = vu_dev->pdev->dev.platform_data; + + virtio_break_device(&vu_dev->vdev); + schedule_work(&pdata->conn_broken_wk); + } if (rc) return rc; size = msg->header.size; if (size > max_payload_size) return -EPROTO; - return full_read(fd, &msg->payload, size); + return full_read(fd, &msg->payload, size, false); } static int vhost_user_recv_resp(struct virtio_uml_device *vu_dev, struct vhost_user_msg *msg, size_t max_payload_size) { - int rc = vhost_user_recv(vu_dev->sock, msg, max_payload_size); + int rc = vhost_user_recv(vu_dev, vu_dev->sock, msg, max_payload_size); if (rc) return rc; @@ -155,7 +172,7 @@ static int vhost_user_recv_req(struct virtio_uml_device *vu_dev, struct vhost_user_msg *msg, size_t max_payload_size) { - int rc = vhost_user_recv(vu_dev->req_fd, msg, max_payload_size); + int rc = vhost_user_recv(vu_dev, vu_dev->req_fd, msg, max_payload_size); if (rc) return rc; @@ -963,11 +980,6 @@ static void virtio_uml_release_dev(struct device *d) /* Platform device */ -struct virtio_uml_platform_data { - u32 virtio_device_id; - const char *socket_path; -}; - static int virtio_uml_probe(struct platform_device *pdev) { struct virtio_uml_platform_data *pdata = pdev->dev.platform_data; @@ -1005,6 +1017,7 @@ static int virtio_uml_probe(struct platform_device *pdev) rc = register_virtio_device(&vu_dev->vdev); if (rc) put_device(&vu_dev->vdev.dev); + vu_dev->registered = 1; return rc; error_init: @@ -1034,13 +1047,31 @@ static struct device vu_cmdline_parent = { static bool vu_cmdline_parent_registered; static int vu_cmdline_id; +static int vu_unregister_cmdline_device(struct device *dev, void *data) +{ + struct platform_device *pdev = to_platform_device(dev); + struct virtio_uml_platform_data *pdata = pdev->dev.platform_data; + + kfree(pdata->socket_path); + platform_device_unregister(pdev); + return 0; +} + +static void vu_conn_broken(struct work_struct *wk) +{ + struct virtio_uml_platform_data *pdata; + + pdata = container_of(wk, struct virtio_uml_platform_data, conn_broken_wk); + vu_unregister_cmdline_device(&pdata->pdev->dev, NULL); +} + static int vu_cmdline_set(const char *device, const struct kernel_param *kp) { const char *ids = strchr(device, ':'); unsigned int virtio_device_id; int processed, consumed, err; char *socket_path; - struct virtio_uml_platform_data pdata; + struct virtio_uml_platform_data pdata, *ppdata; struct platform_device *pdev; if (!ids || ids == device) @@ -1079,6 +1110,11 @@ static int vu_cmdline_set(const char *device, const struct kernel_param *kp) err = PTR_ERR_OR_ZERO(pdev); if (err) goto free; + + ppdata = pdev->dev.platform_data; + ppdata->pdev = pdev; + INIT_WORK(&ppdata->conn_broken_wk, vu_conn_broken); + return 0; free: @@ -1121,16 +1157,6 @@ __uml_help(vu_cmdline_param_ops, ); -static int vu_unregister_cmdline_device(struct device *dev, void *data) -{ - struct platform_device *pdev = to_platform_device(dev); - struct virtio_uml_platform_data *pdata = pdev->dev.platform_data; - - kfree(pdata->socket_path); - platform_device_unregister(pdev); - return 0; -} - static void vu_unregister_cmdline_devices(void) { if (vu_cmdline_parent_registered) { diff --git a/arch/um/include/asm/pgtable-2level.h b/arch/um/include/asm/pgtable-2level.h index 32b3d26a7109..32106d31e4ab 100644 --- a/arch/um/include/asm/pgtable-2level.h +++ b/arch/um/include/asm/pgtable-2level.h @@ -8,7 +8,6 @@ #ifndef __UM_PGTABLE_2LEVEL_H #define __UM_PGTABLE_2LEVEL_H -#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopmd.h> /* PGDIR_SHIFT determines what a third-level page table entry can map */ diff --git a/arch/um/include/asm/pgtable-3level.h b/arch/um/include/asm/pgtable-3level.h index 9812269fefc9..8a3b689e0f86 100644 --- a/arch/um/include/asm/pgtable-3level.h +++ b/arch/um/include/asm/pgtable-3level.h @@ -7,7 +7,6 @@ #ifndef __UM_PGTABLE_3LEVEL_H #define __UM_PGTABLE_3LEVEL_H -#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopud.h> /* PGDIR_SHIFT determines what a third-level page table entry can map */ diff --git a/arch/um/include/asm/pgtable.h b/arch/um/include/asm/pgtable.h index 36a44d58f373..2daa58df2190 100644 --- a/arch/um/include/asm/pgtable.h +++ b/arch/um/include/asm/pgtable.h @@ -106,6 +106,9 @@ extern unsigned long end_iomem; #define pud_newpage(x) (pud_val(x) & _PAGE_NEWPAGE) #define pud_mkuptodate(x) (pud_val(x) &= ~_PAGE_NEWPAGE) +#define p4d_newpage(x) (p4d_val(x) & _PAGE_NEWPAGE) +#define p4d_mkuptodate(x) (p4d_val(x) &= ~_PAGE_NEWPAGE) + #define pmd_page(pmd) phys_to_page(pmd_val(pmd) & PAGE_MASK) #define pte_page(x) pfn_to_page(pte_pfn(x)) diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c index 417ff647fb37..30885d0b94ac 100644 --- a/arch/um/kernel/mem.c +++ b/arch/um/kernel/mem.c @@ -96,6 +96,7 @@ static void __init fixrange_init(unsigned long start, unsigned long end, pgd_t *pgd_base) { pgd_t *pgd; + p4d_t *p4d; pud_t *pud; pmd_t *pmd; int i, j; @@ -107,7 +108,8 @@ static void __init fixrange_init(unsigned long start, unsigned long end, pgd = pgd_base + i; for ( ; (i < PTRS_PER_PGD) && (vaddr < end); pgd++, i++) { - pud = pud_offset(pgd, vaddr); + p4d = p4d_offset(pgd, vaddr); + pud = pud_offset(p4d, vaddr); if (pud_none(*pud)) one_md_table_init(pud); pmd = pmd_offset(pud, vaddr); @@ -124,6 +126,7 @@ static void __init fixaddr_user_init( void) #ifdef CONFIG_ARCH_REUSE_HOST_VSYSCALL_AREA long size = FIXADDR_USER_END - FIXADDR_USER_START; pgd_t *pgd; + p4d_t *p4d; pud_t *pud; pmd_t *pmd; pte_t *pte; @@ -144,7 +147,8 @@ static void __init fixaddr_user_init( void) for ( ; size > 0; size -= PAGE_SIZE, vaddr += PAGE_SIZE, p += PAGE_SIZE) { pgd = swapper_pg_dir + pgd_index(vaddr); - pud = pud_offset(pgd, vaddr); + p4d = p4d_offset(pgd, vaddr); + pud = pud_offset(p4d, vaddr); pmd = pmd_offset(pud, vaddr); pte = pte_offset_kernel(pmd, vaddr); pte_set_val(*pte, p, PAGE_READONLY); diff --git a/arch/um/kernel/skas/mmu.c b/arch/um/kernel/skas/mmu.c index b5e3d91fc9c2..3f0d9a573fd6 100644 --- a/arch/um/kernel/skas/mmu.c +++ b/arch/um/kernel/skas/mmu.c @@ -19,15 +19,21 @@ static int init_stub_pte(struct mm_struct *mm, unsigned long proc, unsigned long kernel) { pgd_t *pgd; + p4d_t *p4d; pud_t *pud; pmd_t *pmd; pte_t *pte; pgd = pgd_offset(mm, proc); - pud = pud_alloc(mm, pgd, proc); - if (!pud) + + p4d = p4d_alloc(mm, pgd, proc); + if (!p4d) goto out; + pud = pud_alloc(mm, p4d, proc); + if (!pud) + goto out_pud; + pmd = pmd_alloc(mm, pud, proc); if (!pmd) goto out_pmd; @@ -44,6 +50,8 @@ static int init_stub_pte(struct mm_struct *mm, unsigned long proc, pmd_free(mm, pmd); out_pmd: pud_free(mm, pud); + out_pud: + p4d_free(mm, p4d); out: return -ENOMEM; } diff --git a/arch/um/kernel/skas/syscall.c b/arch/um/kernel/skas/syscall.c index f574b1856bc6..40d90dddf3f1 100644 --- a/arch/um/kernel/skas/syscall.c +++ b/arch/um/kernel/skas/syscall.c @@ -35,7 +35,7 @@ void handle_syscall(struct uml_pt_regs *r) goto out; /* Do the seccomp check after ptrace; failures should be fast. */ - if (secure_computing(NULL) == -1) + if (secure_computing() == -1) goto out; syscall = UPT_SYSCALL_NR(r); diff --git a/arch/um/kernel/skas/uaccess.c b/arch/um/kernel/skas/uaccess.c index 3236052f20e6..d617f8dc9c19 100644 --- a/arch/um/kernel/skas/uaccess.c +++ b/arch/um/kernel/skas/uaccess.c @@ -17,6 +17,7 @@ pte_t *virt_to_pte(struct mm_struct *mm, unsigned long addr) { pgd_t *pgd; + p4d_t *p4d; pud_t *pud; pmd_t *pmd; @@ -27,7 +28,11 @@ pte_t *virt_to_pte(struct mm_struct *mm, unsigned long addr) if (!pgd_present(*pgd)) return NULL; - pud = pud_offset(pgd, addr); + p4d = p4d_offset(pgd, addr); + if (!p4d_present(*p4d)) + return NULL; + + pud = pud_offset(p4d, addr); if (!pud_present(*pud)) return NULL; diff --git a/arch/um/kernel/tlb.c b/arch/um/kernel/tlb.c index b7eaf655635c..80a358c6d652 100644 --- a/arch/um/kernel/tlb.c +++ b/arch/um/kernel/tlb.c @@ -277,7 +277,7 @@ static inline int update_pmd_range(pud_t *pud, unsigned long addr, return ret; } -static inline int update_pud_range(pgd_t *pgd, unsigned long addr, +static inline int update_pud_range(p4d_t *p4d, unsigned long addr, unsigned long end, struct host_vm_change *hvc) { @@ -285,7 +285,7 @@ static inline int update_pud_range(pgd_t *pgd, unsigned long addr, unsigned long next; int ret = 0; - pud = pud_offset(pgd, addr); + pud = pud_offset(p4d, addr); do { next = pud_addr_end(addr, end); if (!pud_present(*pud)) { @@ -299,6 +299,28 @@ static inline int update_pud_range(pgd_t *pgd, unsigned long addr, return ret; } +static inline int update_p4d_range(pgd_t *pgd, unsigned long addr, + unsigned long end, + struct host_vm_change *hvc) +{ + p4d_t *p4d; + unsigned long next; + int ret = 0; + + p4d = p4d_offset(pgd, addr); + do { + next = p4d_addr_end(addr, end); + if (!p4d_present(*p4d)) { + if (hvc->force || p4d_newpage(*p4d)) { + ret = add_munmap(addr, next - addr, hvc); + p4d_mkuptodate(*p4d); + } + } else + ret = update_pud_range(p4d, addr, next, hvc); + } while (p4d++, addr = next, ((addr < end) && !ret)); + return ret; +} + void fix_range_common(struct mm_struct *mm, unsigned long start_addr, unsigned long end_addr, int force) { @@ -316,8 +338,8 @@ void fix_range_common(struct mm_struct *mm, unsigned long start_addr, ret = add_munmap(addr, next - addr, &hvc); pgd_mkuptodate(*pgd); } - } - else ret = update_pud_range(pgd, addr, next, &hvc); + } else + ret = update_p4d_range(pgd, addr, next, &hvc); } while (pgd++, addr = next, ((addr < end_addr) && !ret)); if (!ret) @@ -338,6 +360,7 @@ static int flush_tlb_kernel_range_common(unsigned long start, unsigned long end) { struct mm_struct *mm; pgd_t *pgd; + p4d_t *p4d; pud_t *pud; pmd_t *pmd; pte_t *pte; @@ -364,7 +387,23 @@ static int flush_tlb_kernel_range_common(unsigned long start, unsigned long end) continue; } - pud = pud_offset(pgd, addr); + p4d = p4d_offset(pgd, addr); + if (!p4d_present(*p4d)) { + last = ADD_ROUND(addr, P4D_SIZE); + if (last > end) + last = end; + if (p4d_newpage(*p4d)) { + updated = 1; + err = add_munmap(addr, last - addr, &hvc); + if (err < 0) + panic("munmap failed, errno = %d\n", + -err); + } + addr = last; + continue; + } + + pud = pud_offset(p4d, addr); if (!pud_present(*pud)) { last = ADD_ROUND(addr, PUD_SIZE); if (last > end) @@ -424,6 +463,7 @@ static int flush_tlb_kernel_range_common(unsigned long start, unsigned long end) void flush_tlb_page(struct vm_area_struct *vma, unsigned long address) { pgd_t *pgd; + p4d_t *p4d; pud_t *pud; pmd_t *pmd; pte_t *pte; @@ -437,7 +477,11 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long address) if (!pgd_present(*pgd)) goto kill; - pud = pud_offset(pgd, address); + p4d = p4d_offset(pgd, address); + if (!p4d_present(*p4d)) + goto kill; + + pud = pud_offset(p4d, address); if (!pud_present(*pud)) goto kill; @@ -490,35 +534,6 @@ kill: force_sig(SIGKILL); } -pgd_t *pgd_offset_proc(struct mm_struct *mm, unsigned long address) -{ - return pgd_offset(mm, address); -} - -pud_t *pud_offset_proc(pgd_t *pgd, unsigned long address) -{ - return pud_offset(pgd, address); -} - -pmd_t *pmd_offset_proc(pud_t *pud, unsigned long address) -{ - return pmd_offset(pud, address); -} - -pte_t *pte_offset_proc(pmd_t *pmd, unsigned long address) -{ - return pte_offset_kernel(pmd, address); -} - -pte_t *addr_pte(struct task_struct *task, unsigned long addr) -{ - pgd_t *pgd = pgd_offset(task->mm, addr); - pud_t *pud = pud_offset(pgd, addr); - pmd_t *pmd = pmd_offset(pud, addr); - - return pte_offset_map(pmd, addr); -} - void flush_tlb_all(void) { /* diff --git a/arch/um/kernel/trap.c b/arch/um/kernel/trap.c index e62296c66c95..818553064f04 100644 --- a/arch/um/kernel/trap.c +++ b/arch/um/kernel/trap.c @@ -28,6 +28,7 @@ int handle_page_fault(unsigned long address, unsigned long ip, struct mm_struct *mm = current->mm; struct vm_area_struct *vma; pgd_t *pgd; + p4d_t *p4d; pud_t *pud; pmd_t *pmd; pte_t *pte; @@ -104,7 +105,8 @@ good_area: } pgd = pgd_offset(mm, address); - pud = pud_offset(pgd, address); + p4d = p4d_offset(pgd, address); + pud = pud_offset(p4d, address); pmd = pmd_offset(pud, address); pte = pte_offset_kernel(pmd, address); } while (!pte_present(*pte)); diff --git a/arch/um/os-Linux/main.c b/arch/um/os-Linux/main.c index 8014dfac644d..c8a42ecbd7a2 100644 --- a/arch/um/os-Linux/main.c +++ b/arch/um/os-Linux/main.c @@ -170,7 +170,7 @@ int __init main(int argc, char **argv, char **envp) * that they won't be delivered after the exec, when * they are definitely not expected. */ - unblock_signals_trace(); + unblock_signals(); os_info("\n"); /* Reboot */ diff --git a/arch/unicore32/include/asm/io.h b/arch/unicore32/include/asm/io.h index c71aa4b95996..4b460e01acfa 100644 --- a/arch/unicore32/include/asm/io.h +++ b/arch/unicore32/include/asm/io.h @@ -18,10 +18,9 @@ #include <asm-generic/io.h> /* - * __uc32_ioremap and __uc32_ioremap_cached takes CPU physical address. + * __uc32_ioremap takes CPU physical address. */ extern void __iomem *__uc32_ioremap(unsigned long, size_t); -extern void __iomem *__uc32_ioremap_cached(unsigned long, size_t); extern void __uc32_iounmap(volatile void __iomem *addr); /* @@ -32,7 +31,6 @@ extern void __uc32_iounmap(volatile void __iomem *addr); * */ #define ioremap(cookie, size) __uc32_ioremap(cookie, size) -#define ioremap_cached(cookie, size) __uc32_ioremap_cached(cookie, size) #define ioremap_nocache(cookie, size) __uc32_ioremap(cookie, size) #define iounmap(cookie) __uc32_iounmap(cookie) diff --git a/arch/unicore32/mm/ioremap.c b/arch/unicore32/mm/ioremap.c index cf6d656f240c..46a64bd6156a 100644 --- a/arch/unicore32/mm/ioremap.c +++ b/arch/unicore32/mm/ioremap.c @@ -220,14 +220,6 @@ __uc32_ioremap(unsigned long phys_addr, size_t size) } EXPORT_SYMBOL(__uc32_ioremap); -void __iomem * -__uc32_ioremap_cached(unsigned long phys_addr, size_t size) -{ - return __uc32_ioremap_caller(phys_addr, size, MT_DEVICE_CACHED, - __builtin_return_address(0)); -} -EXPORT_SYMBOL(__uc32_ioremap_cached); - void __uc32_iounmap(volatile void __iomem *io_addr) { void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr); diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 9c9bc348c412..5e8949953660 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -134,6 +134,7 @@ config X86 select HAVE_ARCH_JUMP_LABEL select HAVE_ARCH_JUMP_LABEL_RELATIVE select HAVE_ARCH_KASAN if X86_64 + select HAVE_ARCH_KASAN_VMALLOC if X86_64 select HAVE_ARCH_KGDB select HAVE_ARCH_MMAP_RND_BITS if MMU select HAVE_ARCH_MMAP_RND_COMPAT_BITS if MMU && COMPAT @@ -157,6 +158,7 @@ config X86 select HAVE_DMA_CONTIGUOUS select HAVE_DYNAMIC_FTRACE select HAVE_DYNAMIC_FTRACE_WITH_REGS + select HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS select HAVE_EBPF_JIT select HAVE_EFFICIENT_UNALIGNED_ACCESS select HAVE_EISA @@ -707,7 +709,6 @@ config X86_SUPPORTS_MEMORY_FAILURE config STA2X11 bool "STA2X11 Companion Chip Support" depends on X86_32_NON_STANDARD && PCI - select ARCH_HAS_PHYS_TO_DMA select SWIOTLB select MFD_STA2X11 select GPIOLIB diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index 409c00f74e60..c4eab8ed33a3 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -117,7 +117,7 @@ config DEBUG_WX config DOUBLEFAULT default y - bool "Enable doublefault exception handler" if EXPERT + bool "Enable doublefault exception handler" if EXPERT && X86_32 ---help--- This option allows trapping of rare doublefault exceptions that would otherwise cause a system to silently reboot. Disabling this diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c index 68945c5700bf..72b08fde6de6 100644 --- a/arch/x86/boot/compressed/eboot.c +++ b/arch/x86/boot/compressed/eboot.c @@ -554,7 +554,11 @@ setup_e820(struct boot_params *params, struct setup_data *e820ext, u32 e820ext_s case EFI_BOOT_SERVICES_CODE: case EFI_BOOT_SERVICES_DATA: case EFI_CONVENTIONAL_MEMORY: - e820_type = E820_TYPE_RAM; + if (efi_soft_reserve_enabled() && + (d->attribute & EFI_MEMORY_SP)) + e820_type = E820_TYPE_SOFT_RESERVED; + else + e820_type = E820_TYPE_RAM; break; case EFI_ACPI_MEMORY_NVS: diff --git a/arch/x86/boot/compressed/kaslr.c b/arch/x86/boot/compressed/kaslr.c index bb9bfef174ae..d7408af55738 100644 --- a/arch/x86/boot/compressed/kaslr.c +++ b/arch/x86/boot/compressed/kaslr.c @@ -132,8 +132,14 @@ char *skip_spaces(const char *str) #include "../../../../lib/ctype.c" #include "../../../../lib/cmdline.c" +enum parse_mode { + PARSE_MEMMAP, + PARSE_EFI, +}; + static int -parse_memmap(char *p, unsigned long long *start, unsigned long long *size) +parse_memmap(char *p, unsigned long long *start, unsigned long long *size, + enum parse_mode mode) { char *oldp; @@ -156,8 +162,29 @@ parse_memmap(char *p, unsigned long long *start, unsigned long long *size) *start = memparse(p + 1, &p); return 0; case '@': - /* memmap=nn@ss specifies usable region, should be skipped */ - *size = 0; + if (mode == PARSE_MEMMAP) { + /* + * memmap=nn@ss specifies usable region, should + * be skipped + */ + *size = 0; + } else { + unsigned long long flags; + + /* + * efi_fake_mem=nn@ss:attr the attr specifies + * flags that might imply a soft-reservation. + */ + *start = memparse(p + 1, &p); + if (p && *p == ':') { + p++; + if (kstrtoull(p, 0, &flags) < 0) + *size = 0; + else if (flags & EFI_MEMORY_SP) + return 0; + } + *size = 0; + } /* Fall through */ default: /* @@ -172,7 +199,7 @@ parse_memmap(char *p, unsigned long long *start, unsigned long long *size) return -EINVAL; } -static void mem_avoid_memmap(char *str) +static void mem_avoid_memmap(enum parse_mode mode, char *str) { static int i; @@ -187,7 +214,7 @@ static void mem_avoid_memmap(char *str) if (k) *k++ = 0; - rc = parse_memmap(str, &start, &size); + rc = parse_memmap(str, &start, &size, mode); if (rc < 0) break; str = k; @@ -238,7 +265,6 @@ static void parse_gb_huge_pages(char *param, char *val) } } - static void handle_mem_options(void) { char *args = (char *)get_cmd_line_ptr(); @@ -271,7 +297,7 @@ static void handle_mem_options(void) } if (!strcmp(param, "memmap")) { - mem_avoid_memmap(val); + mem_avoid_memmap(PARSE_MEMMAP, val); } else if (strstr(param, "hugepages")) { parse_gb_huge_pages(param, val); } else if (!strcmp(param, "mem")) { @@ -284,6 +310,8 @@ static void handle_mem_options(void) goto out; mem_limit = mem_size; + } else if (!strcmp(param, "efi_fake_mem")) { + mem_avoid_memmap(PARSE_EFI, val); } } @@ -772,6 +800,10 @@ process_efi_entries(unsigned long minimum, unsigned long image_size) if (md->type != EFI_CONVENTIONAL_MEMORY) continue; + if (efi_soft_reserve_enabled() && + (md->attribute & EFI_MEMORY_SP)) + continue; + if (efi_mirror_found && !(md->attribute & EFI_MEMORY_MORE_RELIABLE)) continue; diff --git a/arch/x86/crypto/blake2s-glue.c b/arch/x86/crypto/blake2s-glue.c index 4a37ba7cdbe5..1d9ff8a45e1f 100644 --- a/arch/x86/crypto/blake2s-glue.c +++ b/arch/x86/crypto/blake2s-glue.c @@ -210,12 +210,14 @@ static int __init blake2s_mod_init(void) XFEATURE_MASK_AVX512, NULL)) static_branch_enable(&blake2s_use_avx512); - return crypto_register_shashes(blake2s_algs, ARRAY_SIZE(blake2s_algs)); + return IS_REACHABLE(CONFIG_CRYPTO_HASH) ? + crypto_register_shashes(blake2s_algs, + ARRAY_SIZE(blake2s_algs)) : 0; } static void __exit blake2s_mod_exit(void) { - if (boot_cpu_has(X86_FEATURE_SSSE3)) + if (IS_REACHABLE(CONFIG_CRYPTO_HASH) && boot_cpu_has(X86_FEATURE_SSSE3)) crypto_unregister_shashes(blake2s_algs, ARRAY_SIZE(blake2s_algs)); } diff --git a/arch/x86/crypto/chacha_glue.c b/arch/x86/crypto/chacha_glue.c index a94e30b6f941..68a74953efaf 100644 --- a/arch/x86/crypto/chacha_glue.c +++ b/arch/x86/crypto/chacha_glue.c @@ -299,12 +299,13 @@ static int __init chacha_simd_mod_init(void) boot_cpu_has(X86_FEATURE_AVX512BW)) /* kmovq */ static_branch_enable(&chacha_use_avx512vl); } - return crypto_register_skciphers(algs, ARRAY_SIZE(algs)); + return IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER) ? + crypto_register_skciphers(algs, ARRAY_SIZE(algs)) : 0; } static void __exit chacha_simd_mod_fini(void) { - if (boot_cpu_has(X86_FEATURE_SSSE3)) + if (IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER) && boot_cpu_has(X86_FEATURE_SSSE3)) crypto_unregister_skciphers(algs, ARRAY_SIZE(algs)); } diff --git a/arch/x86/crypto/curve25519-x86_64.c b/arch/x86/crypto/curve25519-x86_64.c index a52a3fb15727..eec7d2d24239 100644 --- a/arch/x86/crypto/curve25519-x86_64.c +++ b/arch/x86/crypto/curve25519-x86_64.c @@ -2457,13 +2457,14 @@ static int __init curve25519_mod_init(void) static_branch_enable(&curve25519_use_adx); else return 0; - return crypto_register_kpp(&curve25519_alg); + return IS_REACHABLE(CONFIG_CRYPTO_KPP) ? + crypto_register_kpp(&curve25519_alg) : 0; } static void __exit curve25519_mod_exit(void) { - if (boot_cpu_has(X86_FEATURE_BMI2) || - boot_cpu_has(X86_FEATURE_ADX)) + if (IS_REACHABLE(CONFIG_CRYPTO_KPP) && + (boot_cpu_has(X86_FEATURE_BMI2) || boot_cpu_has(X86_FEATURE_ADX))) crypto_unregister_kpp(&curve25519_alg); } diff --git a/arch/x86/crypto/poly1305_glue.c b/arch/x86/crypto/poly1305_glue.c index 370cd88068ec..0cc4537e6617 100644 --- a/arch/x86/crypto/poly1305_glue.c +++ b/arch/x86/crypto/poly1305_glue.c @@ -224,12 +224,13 @@ static int __init poly1305_simd_mod_init(void) cpu_has_xfeatures(XFEATURE_MASK_SSE | XFEATURE_MASK_YMM, NULL)) static_branch_enable(&poly1305_use_avx2); - return crypto_register_shash(&alg); + return IS_REACHABLE(CONFIG_CRYPTO_HASH) ? crypto_register_shash(&alg) : 0; } static void __exit poly1305_simd_mod_exit(void) { - crypto_unregister_shash(&alg); + if (IS_REACHABLE(CONFIG_CRYPTO_HASH)) + crypto_unregister_shash(&alg); } module_init(poly1305_simd_mod_init); diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S index 5832b11f01bb..7e0560442538 100644 --- a/arch/x86/entry/entry_32.S +++ b/arch/x86/entry/entry_32.S @@ -1090,7 +1090,6 @@ SYM_FUNC_START(entry_INT80_32) restore_all: TRACE_IRQS_IRET SWITCH_TO_ENTRY_STACK -.Lrestore_all_notrace: CHECK_AND_APPLY_ESPFIX .Lrestore_nocheck: /* Switch back to user CR3 */ @@ -1537,6 +1536,48 @@ SYM_CODE_START(debug) jmp common_exception SYM_CODE_END(debug) +#ifdef CONFIG_DOUBLEFAULT +SYM_CODE_START(double_fault) +1: + /* + * This is a task gate handler, not an interrupt gate handler. + * The error code is on the stack, but the stack is otherwise + * empty. Interrupts are off. Our state is sane with the following + * exceptions: + * + * - CR0.TS is set. "TS" literally means "task switched". + * - EFLAGS.NT is set because we're a "nested task". + * - The doublefault TSS has back_link set and has been marked busy. + * - TR points to the doublefault TSS and the normal TSS is busy. + * - CR3 is the normal kernel PGD. This would be delightful, except + * that the CPU didn't bother to save the old CR3 anywhere. This + * would make it very awkward to return back to the context we came + * from. + * + * The rest of EFLAGS is sanitized for us, so we don't need to + * worry about AC or DF. + * + * Don't even bother popping the error code. It's always zero, + * and ignoring it makes us a bit more robust against buggy + * hypervisor task gate implementations. + * + * We will manually undo the task switch instead of doing a + * task-switching IRET. + */ + + clts /* clear CR0.TS */ + pushl $X86_EFLAGS_FIXED + popfl /* clear EFLAGS.NT */ + + call doublefault_shim + + /* We don't support returning, so we have no IRET here. */ +1: + hlt + jmp 1b +SYM_CODE_END(double_fault) +#endif + /* * NMI is doubly nasty. It can happen on the first instruction of * entry_SYSENTER_32 (just like #DB), but it can also interrupt the beginning diff --git a/arch/x86/entry/vdso/vclock_gettime.c b/arch/x86/entry/vdso/vclock_gettime.c index d9ff616bb0f6..7d70935b6758 100644 --- a/arch/x86/entry/vdso/vclock_gettime.c +++ b/arch/x86/entry/vdso/vclock_gettime.c @@ -15,7 +15,7 @@ #include "../../../../lib/vdso/gettimeofday.c" extern int __vdso_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz); -extern time_t __vdso_time(time_t *t); +extern __kernel_old_time_t __vdso_time(__kernel_old_time_t *t); int __vdso_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz) { @@ -25,12 +25,12 @@ int __vdso_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz) int gettimeofday(struct __kernel_old_timeval *, struct timezone *) __attribute__((weak, alias("__vdso_gettimeofday"))); -time_t __vdso_time(time_t *t) +__kernel_old_time_t __vdso_time(__kernel_old_time_t *t) { return __cvdso_time(t); } -time_t time(time_t *t) __attribute__((weak, alias("__vdso_time"))); +__kernel_old_time_t time(__kernel_old_time_t *t) __attribute__((weak, alias("__vdso_time"))); #if defined(CONFIG_X86_64) && !defined(BUILD_VDSO32_64) diff --git a/arch/x86/entry/vsyscall/vsyscall_64.c b/arch/x86/entry/vsyscall/vsyscall_64.c index e7c596dea947..44c33103a955 100644 --- a/arch/x86/entry/vsyscall/vsyscall_64.c +++ b/arch/x86/entry/vsyscall/vsyscall_64.c @@ -184,7 +184,7 @@ bool emulate_vsyscall(unsigned long error_code, */ switch (vsyscall_nr) { case 0: - if (!write_ok_or_segv(regs->di, sizeof(struct timeval)) || + if (!write_ok_or_segv(regs->di, sizeof(struct __kernel_old_timeval)) || !write_ok_or_segv(regs->si, sizeof(struct timezone))) { ret = -EFAULT; goto check_fault; @@ -194,7 +194,7 @@ bool emulate_vsyscall(unsigned long error_code, break; case 1: - if (!write_ok_or_segv(regs->di, sizeof(time_t))) { + if (!write_ok_or_segv(regs->di, sizeof(__kernel_old_time_t))) { ret = -EFAULT; goto check_fault; } @@ -222,7 +222,7 @@ bool emulate_vsyscall(unsigned long error_code, */ regs->orig_ax = syscall_nr; regs->ax = -ENOSYS; - tmp = secure_computing(NULL); + tmp = secure_computing(); if ((!tmp && regs->orig_ax != syscall_nr) || regs->ip != address) { warn_bad_vsyscall(KERN_DEBUG, regs, "seccomp tried to change syscall nr or ip"); diff --git a/arch/x86/events/core.c b/arch/x86/events/core.c index 6e3f0c18908e..9a89d98c55bd 100644 --- a/arch/x86/events/core.c +++ b/arch/x86/events/core.c @@ -49,6 +49,7 @@ DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = { .enabled = 1, }; +DEFINE_STATIC_KEY_FALSE(rdpmc_never_available_key); DEFINE_STATIC_KEY_FALSE(rdpmc_always_available_key); u64 __read_mostly hw_cache_event_ids @@ -2181,21 +2182,26 @@ static ssize_t set_attr_rdpmc(struct device *cdev, if (x86_pmu.attr_rdpmc_broken) return -ENOTSUPP; - if ((val == 2) != (x86_pmu.attr_rdpmc == 2)) { + if (val != x86_pmu.attr_rdpmc) { /* - * Changing into or out of always available, aka - * perf-event-bypassing mode. This path is extremely slow, + * Changing into or out of never available or always available, + * aka perf-event-bypassing mode. This path is extremely slow, * but only root can trigger it, so it's okay. */ + if (val == 0) + static_branch_inc(&rdpmc_never_available_key); + else if (x86_pmu.attr_rdpmc == 0) + static_branch_dec(&rdpmc_never_available_key); + if (val == 2) static_branch_inc(&rdpmc_always_available_key); - else + else if (x86_pmu.attr_rdpmc == 2) static_branch_dec(&rdpmc_always_available_key); + on_each_cpu(refresh_pce, NULL, 1); + x86_pmu.attr_rdpmc = val; } - x86_pmu.attr_rdpmc = val; - return count; } diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c index 50ff030d9224..caaf4dce99bf 100644 --- a/arch/x86/hyperv/hv_init.c +++ b/arch/x86/hyperv/hv_init.c @@ -7,6 +7,7 @@ * Author : K. Y. Srinivasan <kys@microsoft.com> */ +#include <linux/acpi.h> #include <linux/efi.h> #include <linux/types.h> #include <asm/apic.h> @@ -45,6 +46,14 @@ void *hv_alloc_hyperv_page(void) } EXPORT_SYMBOL_GPL(hv_alloc_hyperv_page); +void *hv_alloc_hyperv_zeroed_page(void) +{ + BUILD_BUG_ON(PAGE_SIZE != HV_HYP_PAGE_SIZE); + + return (void *)__get_free_page(GFP_KERNEL | __GFP_ZERO); +} +EXPORT_SYMBOL_GPL(hv_alloc_hyperv_zeroed_page); + void hv_free_hyperv_page(unsigned long addr) { free_page(addr); @@ -437,3 +446,9 @@ bool hv_is_hyperv_initialized(void) return hypercall_msr.enable; } EXPORT_SYMBOL_GPL(hv_is_hyperv_initialized); + +bool hv_is_hibernation_supported(void) +{ + return acpi_sleep_state_supported(ACPI_STATE_S4); +} +EXPORT_SYMBOL_GPL(hv_is_hibernation_supported); diff --git a/arch/x86/include/asm/bitops.h b/arch/x86/include/asm/bitops.h index 7d1f6a49bfae..062cdecb2f24 100644 --- a/arch/x86/include/asm/bitops.h +++ b/arch/x86/include/asm/bitops.h @@ -388,7 +388,9 @@ static __always_inline int fls64(__u64 x) #include <asm-generic/bitops/const_hweight.h> -#include <asm-generic/bitops-instrumented.h> +#include <asm-generic/bitops/instrumented-atomic.h> +#include <asm-generic/bitops/instrumented-non-atomic.h> +#include <asm-generic/bitops/instrumented-lock.h> #include <asm-generic/bitops/le.h> diff --git a/arch/x86/include/asm/cpu_entry_area.h b/arch/x86/include/asm/cpu_entry_area.h index ea866c7bf31d..804734058c77 100644 --- a/arch/x86/include/asm/cpu_entry_area.h +++ b/arch/x86/include/asm/cpu_entry_area.h @@ -65,6 +65,13 @@ enum exception_stack_ordering { #endif +#ifdef CONFIG_X86_32 +struct doublefault_stack { + unsigned long stack[(PAGE_SIZE - sizeof(struct x86_hw_tss)) / sizeof(unsigned long)]; + struct x86_hw_tss tss; +} __aligned(PAGE_SIZE); +#endif + /* * cpu_entry_area is a percpu region that contains things needed by the CPU * and early entry/exit code. Real types aren't used for all fields here @@ -86,6 +93,11 @@ struct cpu_entry_area { #endif struct entry_stack_page entry_stack_page; +#ifdef CONFIG_X86_32 + char guard_doublefault_stack[PAGE_SIZE]; + struct doublefault_stack doublefault_stack; +#endif + /* * On x86_64, the TSS is mapped RO. On x86_32, it's mapped RW because * we need task switches to work, and task switches write to the TSS. diff --git a/arch/x86/include/asm/device.h b/arch/x86/include/asm/device.h index a8f6c809d9b1..5e12c63b47aa 100644 --- a/arch/x86/include/asm/device.h +++ b/arch/x86/include/asm/device.h @@ -6,9 +6,6 @@ struct dev_archdata { #if defined(CONFIG_INTEL_IOMMU) || defined(CONFIG_AMD_IOMMU) void *iommu; /* hook for IOMMU specific extension */ #endif -#ifdef CONFIG_STA2X11 - bool is_sta2x11; -#endif }; #if defined(CONFIG_X86_DEV_DMA_OPS) && defined(CONFIG_PCI_DOMAINS) diff --git a/arch/x86/include/asm/dma-direct.h b/arch/x86/include/asm/dma-direct.h deleted file mode 100644 index 1a19251eaac9..000000000000 --- a/arch/x86/include/asm/dma-direct.h +++ /dev/null @@ -1,9 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef ASM_X86_DMA_DIRECT_H -#define ASM_X86_DMA_DIRECT_H 1 - -bool dma_capable(struct device *dev, dma_addr_t addr, size_t size); -dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr); -phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr); - -#endif /* ASM_X86_DMA_DIRECT_H */ diff --git a/arch/x86/include/asm/doublefault.h b/arch/x86/include/asm/doublefault.h new file mode 100644 index 000000000000..af9a14ac8962 --- /dev/null +++ b/arch/x86/include/asm/doublefault.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_X86_DOUBLEFAULT_H +#define _ASM_X86_DOUBLEFAULT_H + +#if defined(CONFIG_X86_32) && defined(CONFIG_DOUBLEFAULT) +extern void doublefault_init_cpu_tss(void); +#else +static inline void doublefault_init_cpu_tss(void) +{ +} +#endif + +#endif /* _ASM_X86_DOUBLEFAULT_H */ diff --git a/arch/x86/include/asm/e820/types.h b/arch/x86/include/asm/e820/types.h index c3aa4b5e49e2..314f75d886d0 100644 --- a/arch/x86/include/asm/e820/types.h +++ b/arch/x86/include/asm/e820/types.h @@ -29,6 +29,14 @@ enum e820_type { E820_TYPE_PRAM = 12, /* + * Special-purpose memory is indicated to the system via the + * EFI_MEMORY_SP attribute. Define an e820 translation of this + * memory type for the purpose of reserving this range and + * marking it with the IORES_DESC_SOFT_RESERVED designation. + */ + E820_TYPE_SOFT_RESERVED = 0xefffffff, + + /* * Reserved RAM used by the kernel itself if * CONFIG_INTEL_TXT=y is enabled, memory of this type * will be included in the S3 integrity calculation diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h index 43a82e59c59d..d028e9acdf1c 100644 --- a/arch/x86/include/asm/efi.h +++ b/arch/x86/include/asm/efi.h @@ -140,7 +140,6 @@ extern void efi_delete_dummy_variable(void); extern void efi_switch_mm(struct mm_struct *mm); extern void efi_recover_from_page_fault(unsigned long phys_addr); extern void efi_free_boot_services(void); -extern void efi_reserve_boot_services(void); struct efi_setup_data { u64 fw_vendor; @@ -244,6 +243,8 @@ static inline bool efi_is_64bit(void) extern bool efi_reboot_required(void); extern bool efi_is_table_address(unsigned long phys_addr); +extern void efi_find_mirror(void); +extern void efi_reserve_boot_services(void); #else static inline void parse_efi_setup(u64 phys_addr, u32 data_len) {} static inline bool efi_reboot_required(void) @@ -254,6 +255,20 @@ static inline bool efi_is_table_address(unsigned long phys_addr) { return false; } +static inline void efi_find_mirror(void) +{ +} +static inline void efi_reserve_boot_services(void) +{ +} #endif /* CONFIG_EFI */ +#ifdef CONFIG_EFI_FAKE_MEMMAP +extern void __init efi_fake_memmap_early(void); +#else +static inline void efi_fake_memmap_early(void) +{ +} +#endif + #endif /* _ASM_X86_EFI_H */ diff --git a/arch/x86/include/asm/fpu/internal.h b/arch/x86/include/asm/fpu/internal.h index 4c95c365058a..44c48e34d799 100644 --- a/arch/x86/include/asm/fpu/internal.h +++ b/arch/x86/include/asm/fpu/internal.h @@ -509,7 +509,7 @@ static inline void __fpu_invalidate_fpregs_state(struct fpu *fpu) static inline int fpregs_state_valid(struct fpu *fpu, unsigned int cpu) { - return fpu == this_cpu_read_stable(fpu_fpregs_owner_ctx) && cpu == fpu->last_cpu; + return fpu == this_cpu_read(fpu_fpregs_owner_ctx) && cpu == fpu->last_cpu; } /* diff --git a/arch/x86/include/asm/ftrace.h b/arch/x86/include/asm/ftrace.h index dbd9b08bf173..85be2f506272 100644 --- a/arch/x86/include/asm/ftrace.h +++ b/arch/x86/include/asm/ftrace.h @@ -28,6 +28,19 @@ static inline unsigned long ftrace_call_adjust(unsigned long addr) return addr; } +/* + * When a ftrace registered caller is tracing a function that is + * also set by a register_ftrace_direct() call, it needs to be + * differentiated in the ftrace_caller trampoline. To do this, we + * place the direct caller in the ORIG_AX part of pt_regs. This + * tells the ftrace_caller that there's a direct caller. + */ +static inline void arch_ftrace_set_direct_caller(struct pt_regs *regs, unsigned long addr) +{ + /* Emulate a call */ + regs->orig_ax = addr; +} + #ifdef CONFIG_DYNAMIC_FTRACE struct dyn_arch_ftrace { diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h index 6bed97ff6db2..9997521fc5cd 100644 --- a/arch/x86/include/asm/io.h +++ b/arch/x86/include/asm/io.h @@ -180,8 +180,6 @@ static inline unsigned int isa_virt_to_bus(volatile void *address) * The default ioremap() behavior is non-cached; if you need something * else, you probably want one of the following. */ -extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size); -#define ioremap_nocache ioremap_nocache extern void __iomem *ioremap_uc(resource_size_t offset, unsigned long size); #define ioremap_uc ioremap_uc extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size); @@ -205,10 +203,7 @@ extern void __iomem *ioremap_encrypted(resource_size_t phys_addr, unsigned long * If the area you are trying to map is a PCI BAR you should have a * look at pci_iomap(). */ -static inline void __iomem *ioremap(resource_size_t offset, unsigned long size) -{ - return ioremap_nocache(offset, size); -} +void __iomem *ioremap(resource_size_t offset, unsigned long size); #define ioremap ioremap extern void iounmap(volatile void __iomem *addr); diff --git a/arch/x86/include/asm/iommu.h b/arch/x86/include/asm/iommu.h index b91623d521d9..bf1ed2ddc74b 100644 --- a/arch/x86/include/asm/iommu.h +++ b/arch/x86/include/asm/iommu.h @@ -2,10 +2,28 @@ #ifndef _ASM_X86_IOMMU_H #define _ASM_X86_IOMMU_H +#include <linux/acpi.h> + +#include <asm/e820/api.h> + extern int force_iommu, no_iommu; extern int iommu_detected; /* 10 seconds */ #define DMAR_OPERATION_TIMEOUT ((cycles_t) tsc_khz*10*1000) +static inline int __init +arch_rmrr_sanity_check(struct acpi_dmar_reserved_memory *rmrr) +{ + u64 start = rmrr->base_address; + u64 end = rmrr->end_address + 1; + + if (e820__mapped_all(start, end, E820_TYPE_RESERVED)) + return 0; + + pr_err(FW_BUG "No firmware reserved region can cover this RMRR [%#018Lx-%#018Lx], contact BIOS vendor for fixes\n", + start, end - 1); + return -EINVAL; +} + #endif /* _ASM_X86_IOMMU_H */ diff --git a/arch/x86/include/asm/mmu_context.h b/arch/x86/include/asm/mmu_context.h index 16ae821483c8..5f33924e200f 100644 --- a/arch/x86/include/asm/mmu_context.h +++ b/arch/x86/include/asm/mmu_context.h @@ -26,12 +26,14 @@ static inline void paravirt_activate_mm(struct mm_struct *prev, #ifdef CONFIG_PERF_EVENTS +DECLARE_STATIC_KEY_FALSE(rdpmc_never_available_key); DECLARE_STATIC_KEY_FALSE(rdpmc_always_available_key); static inline void load_mm_cr4_irqsoff(struct mm_struct *mm) { if (static_branch_unlikely(&rdpmc_always_available_key) || - atomic_read(&mm->context.perf_rdpmc_allowed)) + (!static_branch_unlikely(&rdpmc_never_available_key) && + atomic_read(&mm->context.perf_rdpmc_allowed))) cr4_set_bits_irqsoff(X86_CR4_PCE); else cr4_clear_bits_irqsoff(X86_CR4_PCE); diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h index f4138aeb4280..6b79515abb82 100644 --- a/arch/x86/include/asm/mshyperv.h +++ b/arch/x86/include/asm/mshyperv.h @@ -219,6 +219,7 @@ static inline struct hv_vp_assist_page *hv_get_vp_assist_page(unsigned int cpu) void __init hyperv_init(void); void hyperv_setup_mmu_ops(void); void *hv_alloc_hyperv_page(void); +void *hv_alloc_hyperv_zeroed_page(void); void hv_free_hyperv_page(unsigned long addr); void hyperv_reenlightenment_intr(struct pt_regs *regs); void set_hv_tscchange_cb(void (*cb)(void)); diff --git a/arch/x86/include/asm/pgtable_32_types.h b/arch/x86/include/asm/pgtable_32_types.h index 19f5807260c3..0416d42e5bdd 100644 --- a/arch/x86/include/asm/pgtable_32_types.h +++ b/arch/x86/include/asm/pgtable_32_types.h @@ -41,10 +41,11 @@ extern bool __vmalloc_start_set; /* set once high_memory is set */ #endif /* - * Define this here and validate with BUILD_BUG_ON() in pgtable_32.c - * to avoid include recursion hell + * This is an upper bound on sizeof(struct cpu_entry_area) / PAGE_SIZE. + * Define this here and validate with BUILD_BUG_ON() in cpu_entry_area.c + * to avoid include recursion hell. */ -#define CPU_ENTRY_AREA_PAGES (NR_CPUS * 41) +#define CPU_ENTRY_AREA_PAGES (NR_CPUS * 43) /* The +1 is for the readonly IDT page: */ #define CPU_ENTRY_AREA_BASE \ diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index e51afbb0cbfb..0340aad3f2fc 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -166,7 +166,6 @@ enum cpuid_regs_idx { extern struct cpuinfo_x86 boot_cpu_data; extern struct cpuinfo_x86 new_cpu_data; -extern struct x86_hw_tss doublefault_tss; extern __u32 cpu_caps_cleared[NCAPINTS + NBUGINTS]; extern __u32 cpu_caps_set[NCAPINTS + NBUGINTS]; @@ -997,7 +996,6 @@ bool xen_set_default_idle(void); #endif void stop_this_cpu(void *dummy); -void df_debug(struct pt_regs *regs, long error_code); void microcode_check(void); enum l1tf_mitigations { diff --git a/arch/x86/include/asm/traps.h b/arch/x86/include/asm/traps.h index b25e633033c3..ffa0dc8a535e 100644 --- a/arch/x86/include/asm/traps.h +++ b/arch/x86/include/asm/traps.h @@ -69,6 +69,9 @@ dotraplinkage void do_overflow(struct pt_regs *regs, long error_code); dotraplinkage void do_bounds(struct pt_regs *regs, long error_code); dotraplinkage void do_invalid_op(struct pt_regs *regs, long error_code); dotraplinkage void do_device_not_available(struct pt_regs *regs, long error_code); +#if defined(CONFIG_X86_64) || defined(CONFIG_DOUBLEFAULT) +dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code, unsigned long cr2); +#endif dotraplinkage void do_coprocessor_segment_overrun(struct pt_regs *regs, long error_code); dotraplinkage void do_invalid_TSS(struct pt_regs *regs, long error_code); dotraplinkage void do_segment_not_present(struct pt_regs *regs, long error_code); diff --git a/arch/x86/include/asm/unwind_hints.h b/arch/x86/include/asm/unwind_hints.h index 0bcdb1279361..f5e2eb12cb71 100644 --- a/arch/x86/include/asm/unwind_hints.h +++ b/arch/x86/include/asm/unwind_hints.h @@ -86,6 +86,14 @@ UNWIND_HINT sp_offset=\sp_offset .endm +.macro UNWIND_HINT_SAVE + UNWIND_HINT type=UNWIND_HINT_TYPE_SAVE +.endm + +.macro UNWIND_HINT_RESTORE + UNWIND_HINT type=UNWIND_HINT_TYPE_RESTORE +.endm + #else /* !__ASSEMBLY__ */ #define UNWIND_HINT(sp_reg, sp_offset, type, end) \ diff --git a/arch/x86/include/uapi/asm/msgbuf.h b/arch/x86/include/uapi/asm/msgbuf.h index 90ab9a795b49..b3d0664fadc9 100644 --- a/arch/x86/include/uapi/asm/msgbuf.h +++ b/arch/x86/include/uapi/asm/msgbuf.h @@ -5,6 +5,9 @@ #if !defined(__x86_64__) || !defined(__ILP32__) #include <asm-generic/msgbuf.h> #else + +#include <asm/ipcbuf.h> + /* * The msqid64_ds structure for x86 architecture with x32 ABI. * @@ -15,9 +18,9 @@ struct msqid64_ds { struct ipc64_perm msg_perm; - __kernel_time_t msg_stime; /* last msgsnd time */ - __kernel_time_t msg_rtime; /* last msgrcv time */ - __kernel_time_t msg_ctime; /* last change time */ + __kernel_long_t msg_stime; /* last msgsnd time */ + __kernel_long_t msg_rtime; /* last msgrcv time */ + __kernel_long_t msg_ctime; /* last change time */ __kernel_ulong_t msg_cbytes; /* current number of bytes on queue */ __kernel_ulong_t msg_qnum; /* number of messages in queue */ __kernel_ulong_t msg_qbytes; /* max number of bytes on queue */ diff --git a/arch/x86/include/uapi/asm/sembuf.h b/arch/x86/include/uapi/asm/sembuf.h index 89de6cd9f0a7..71205b02a191 100644 --- a/arch/x86/include/uapi/asm/sembuf.h +++ b/arch/x86/include/uapi/asm/sembuf.h @@ -2,6 +2,8 @@ #ifndef _ASM_X86_SEMBUF_H #define _ASM_X86_SEMBUF_H +#include <asm/ipcbuf.h> + /* * The semid64_ds structure for x86 architecture. * Note extra padding because this structure is passed back and forth @@ -21,9 +23,9 @@ struct semid64_ds { unsigned long sem_ctime; /* last change time */ unsigned long sem_ctime_high; #else - __kernel_time_t sem_otime; /* last semop time */ + __kernel_long_t sem_otime; /* last semop time */ __kernel_ulong_t __unused1; - __kernel_time_t sem_ctime; /* last change time */ + __kernel_long_t sem_ctime; /* last change time */ __kernel_ulong_t __unused2; #endif __kernel_ulong_t sem_nsems; /* no. of semaphores in array */ diff --git a/arch/x86/include/uapi/asm/shmbuf.h b/arch/x86/include/uapi/asm/shmbuf.h index 644421f3823b..f0305dc660c9 100644 --- a/arch/x86/include/uapi/asm/shmbuf.h +++ b/arch/x86/include/uapi/asm/shmbuf.h @@ -16,9 +16,9 @@ struct shmid64_ds { struct ipc64_perm shm_perm; /* operation perms */ size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - __kernel_time_t shm_dtime; /* last detach time */ - __kernel_time_t shm_ctime; /* last change time */ + __kernel_long_t shm_atime; /* last attach time */ + __kernel_long_t shm_dtime; /* last detach time */ + __kernel_long_t shm_ctime; /* last change time */ __kernel_pid_t shm_cpid; /* pid of creator */ __kernel_pid_t shm_lpid; /* pid of last operator */ __kernel_ulong_t shm_nattch; /* no. of current attaches */ diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 32acb970f416..6175e370ee4a 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -100,7 +100,9 @@ obj-$(CONFIG_KEXEC_FILE) += kexec-bzimage64.o obj-$(CONFIG_CRASH_DUMP) += crash_dump_$(BITS).o obj-y += kprobes/ obj-$(CONFIG_MODULES) += module.o -obj-$(CONFIG_DOUBLEFAULT) += doublefault.o +ifeq ($(CONFIG_X86_32),y) +obj-$(CONFIG_DOUBLEFAULT) += doublefault_32.o +endif obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_VM86) += vm86_32.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o diff --git a/arch/x86/kernel/amd_gart_64.c b/arch/x86/kernel/amd_gart_64.c index 4bbccb9d16dc..4e5f50236048 100644 --- a/arch/x86/kernel/amd_gart_64.c +++ b/arch/x86/kernel/amd_gart_64.c @@ -185,13 +185,13 @@ static void iommu_full(struct device *dev, size_t size, int dir) static inline int need_iommu(struct device *dev, unsigned long addr, size_t size) { - return force_iommu || !dma_capable(dev, addr, size); + return force_iommu || !dma_capable(dev, addr, size, true); } static inline int nonforced_iommu(struct device *dev, unsigned long addr, size_t size) { - return !dma_capable(dev, addr, size); + return !dma_capable(dev, addr, size, true); } /* Map a single continuous physical area into the IOMMU. diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index baa2fed8deb6..2e4d90294fe6 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -24,6 +24,7 @@ #include <asm/stackprotector.h> #include <asm/perf_event.h> #include <asm/mmu_context.h> +#include <asm/doublefault.h> #include <asm/archrandom.h> #include <asm/hypervisor.h> #include <asm/processor.h> @@ -1814,8 +1815,6 @@ static inline void tss_setup_ist(struct tss_struct *tss) tss->x86_tss.ist[IST_INDEX_MCE] = __this_cpu_ist_top_va(MCE); } -static inline void gdt_setup_doublefault_tss(int cpu) { } - #else /* CONFIG_X86_64 */ static inline void setup_getcpu(int cpu) { } @@ -1827,13 +1826,6 @@ static inline void ucode_cpu_init(int cpu) static inline void tss_setup_ist(struct tss_struct *tss) { } -static inline void gdt_setup_doublefault_tss(int cpu) -{ -#ifdef CONFIG_DOUBLEFAULT - /* Set up the doublefault TSS pointer in the GDT */ - __set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss); -#endif -} #endif /* !CONFIG_X86_64 */ static inline void tss_setup_io_bitmap(struct tss_struct *tss) @@ -1923,7 +1915,7 @@ void cpu_init(void) clear_all_debug_regs(); dbg_restore_debug_regs(); - gdt_setup_doublefault_tss(cpu); + doublefault_init_cpu_tss(); fpu__init_cpu(); diff --git a/arch/x86/kernel/cpu/mce/therm_throt.c b/arch/x86/kernel/cpu/mce/therm_throt.c index d01e0da0163a..b38010b541d6 100644 --- a/arch/x86/kernel/cpu/mce/therm_throt.c +++ b/arch/x86/kernel/cpu/mce/therm_throt.c @@ -195,17 +195,24 @@ static const struct attribute_group thermal_attr_group = { #define THERM_THROT_POLL_INTERVAL HZ #define THERM_STATUS_PROCHOT_LOG BIT(1) +#define THERM_STATUS_CLEAR_CORE_MASK (BIT(1) | BIT(3) | BIT(5) | BIT(7) | BIT(9) | BIT(11) | BIT(13) | BIT(15)) +#define THERM_STATUS_CLEAR_PKG_MASK (BIT(1) | BIT(3) | BIT(5) | BIT(7) | BIT(9) | BIT(11)) + static void clear_therm_status_log(int level) { int msr; - u64 msr_val; + u64 mask, msr_val; - if (level == CORE_LEVEL) - msr = MSR_IA32_THERM_STATUS; - else - msr = MSR_IA32_PACKAGE_THERM_STATUS; + if (level == CORE_LEVEL) { + msr = MSR_IA32_THERM_STATUS; + mask = THERM_STATUS_CLEAR_CORE_MASK; + } else { + msr = MSR_IA32_PACKAGE_THERM_STATUS; + mask = THERM_STATUS_CLEAR_PKG_MASK; + } rdmsrl(msr, msr_val); + msr_val &= mask; wrmsrl(msr, msr_val & ~THERM_STATUS_PROCHOT_LOG); } diff --git a/arch/x86/kernel/doublefault.c b/arch/x86/kernel/doublefault.c deleted file mode 100644 index 0d6c657593f8..000000000000 --- a/arch/x86/kernel/doublefault.c +++ /dev/null @@ -1,86 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/sched/debug.h> -#include <linux/init_task.h> -#include <linux/fs.h> - -#include <linux/uaccess.h> -#include <asm/pgtable.h> -#include <asm/processor.h> -#include <asm/desc.h> - -#ifdef CONFIG_X86_32 - -#define DOUBLEFAULT_STACKSIZE (1024) -static unsigned long doublefault_stack[DOUBLEFAULT_STACKSIZE]; -#define STACK_START (unsigned long)(doublefault_stack+DOUBLEFAULT_STACKSIZE) - -#define ptr_ok(x) ((x) > PAGE_OFFSET && (x) < PAGE_OFFSET + MAXMEM) - -static void doublefault_fn(void) -{ - struct desc_ptr gdt_desc = {0, 0}; - unsigned long gdt, tss; - - native_store_gdt(&gdt_desc); - gdt = gdt_desc.address; - - printk(KERN_EMERG "PANIC: double fault, gdt at %08lx [%d bytes]\n", gdt, gdt_desc.size); - - if (ptr_ok(gdt)) { - gdt += GDT_ENTRY_TSS << 3; - tss = get_desc_base((struct desc_struct *)gdt); - printk(KERN_EMERG "double fault, tss at %08lx\n", tss); - - if (ptr_ok(tss)) { - struct x86_hw_tss *t = (struct x86_hw_tss *)tss; - - printk(KERN_EMERG "eip = %08lx, esp = %08lx\n", - t->ip, t->sp); - - printk(KERN_EMERG "eax = %08lx, ebx = %08lx, ecx = %08lx, edx = %08lx\n", - t->ax, t->bx, t->cx, t->dx); - printk(KERN_EMERG "esi = %08lx, edi = %08lx\n", - t->si, t->di); - } - } - - for (;;) - cpu_relax(); -} - -struct x86_hw_tss doublefault_tss __cacheline_aligned = { - .sp0 = STACK_START, - .ss0 = __KERNEL_DS, - .ldt = 0, - .io_bitmap_base = IO_BITMAP_OFFSET_INVALID, - - .ip = (unsigned long) doublefault_fn, - /* 0x2 bit is always set */ - .flags = X86_EFLAGS_SF | 0x2, - .sp = STACK_START, - .es = __USER_DS, - .cs = __KERNEL_CS, - .ss = __KERNEL_DS, - .ds = __USER_DS, - .fs = __KERNEL_PERCPU, -#ifndef CONFIG_X86_32_LAZY_GS - .gs = __KERNEL_STACK_CANARY, -#endif - - .__cr3 = __pa_nodebug(swapper_pg_dir), -}; - -/* dummy for do_double_fault() call */ -void df_debug(struct pt_regs *regs, long error_code) {} - -#else /* !CONFIG_X86_32 */ - -void df_debug(struct pt_regs *regs, long error_code) -{ - pr_emerg("PANIC: double fault, error_code: 0x%lx\n", error_code); - show_regs(regs); - panic("Machine halted."); -} -#endif diff --git a/arch/x86/kernel/doublefault_32.c b/arch/x86/kernel/doublefault_32.c new file mode 100644 index 000000000000..3793646f0fb5 --- /dev/null +++ b/arch/x86/kernel/doublefault_32.c @@ -0,0 +1,136 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/sched/debug.h> +#include <linux/init_task.h> +#include <linux/fs.h> + +#include <linux/uaccess.h> +#include <asm/pgtable.h> +#include <asm/processor.h> +#include <asm/desc.h> +#include <asm/traps.h> + +extern void double_fault(void); +#define ptr_ok(x) ((x) > PAGE_OFFSET && (x) < PAGE_OFFSET + MAXMEM) + +#define TSS(x) this_cpu_read(cpu_tss_rw.x86_tss.x) + +static void set_df_gdt_entry(unsigned int cpu); + +/* + * Called by double_fault with CR0.TS and EFLAGS.NT cleared. The CPU thinks + * we're running the doublefault task. Cannot return. + */ +asmlinkage notrace void __noreturn doublefault_shim(void) +{ + unsigned long cr2; + struct pt_regs regs; + + BUILD_BUG_ON(sizeof(struct doublefault_stack) != PAGE_SIZE); + + cr2 = native_read_cr2(); + + /* Reset back to the normal kernel task. */ + force_reload_TR(); + set_df_gdt_entry(smp_processor_id()); + + trace_hardirqs_off(); + + /* + * Fill in pt_regs. A downside of doing this in C is that the unwinder + * won't see it (no ENCODE_FRAME_POINTER), so a nested stack dump + * won't successfully unwind to the source of the double fault. + * The main dump from do_double_fault() is fine, though, since it + * uses these regs directly. + * + * If anyone ever cares, this could be moved to asm. + */ + regs.ss = TSS(ss); + regs.__ssh = 0; + regs.sp = TSS(sp); + regs.flags = TSS(flags); + regs.cs = TSS(cs); + /* We won't go through the entry asm, so we can leave __csh as 0. */ + regs.__csh = 0; + regs.ip = TSS(ip); + regs.orig_ax = 0; + regs.gs = TSS(gs); + regs.__gsh = 0; + regs.fs = TSS(fs); + regs.__fsh = 0; + regs.es = TSS(es); + regs.__esh = 0; + regs.ds = TSS(ds); + regs.__dsh = 0; + regs.ax = TSS(ax); + regs.bp = TSS(bp); + regs.di = TSS(di); + regs.si = TSS(si); + regs.dx = TSS(dx); + regs.cx = TSS(cx); + regs.bx = TSS(bx); + + do_double_fault(®s, 0, cr2); + + /* + * x86_32 does not save the original CR3 anywhere on a task switch. + * This means that, even if we wanted to return, we would need to find + * some way to reconstruct CR3. We could make a credible guess based + * on cpu_tlbstate, but that would be racy and would not account for + * PTI. + * + * Instead, don't bother. We can return through + * rewind_stack_do_exit() instead. + */ + panic("cannot return from double fault\n"); +} +NOKPROBE_SYMBOL(doublefault_shim); + +DEFINE_PER_CPU_PAGE_ALIGNED(struct doublefault_stack, doublefault_stack) = { + .tss = { + /* + * No sp0 or ss0 -- we never run CPL != 0 with this TSS + * active. sp is filled in later. + */ + .ldt = 0, + .io_bitmap_base = IO_BITMAP_OFFSET_INVALID, + + .ip = (unsigned long) double_fault, + .flags = X86_EFLAGS_FIXED, + .es = __USER_DS, + .cs = __KERNEL_CS, + .ss = __KERNEL_DS, + .ds = __USER_DS, + .fs = __KERNEL_PERCPU, +#ifndef CONFIG_X86_32_LAZY_GS + .gs = __KERNEL_STACK_CANARY, +#endif + + .__cr3 = __pa_nodebug(swapper_pg_dir), + }, +}; + +static void set_df_gdt_entry(unsigned int cpu) +{ + /* Set up doublefault TSS pointer in the GDT */ + __set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, + &get_cpu_entry_area(cpu)->doublefault_stack.tss); + +} + +void doublefault_init_cpu_tss(void) +{ + unsigned int cpu = smp_processor_id(); + struct cpu_entry_area *cea = get_cpu_entry_area(cpu); + + /* + * The linker isn't smart enough to initialize percpu variables that + * point to other places in percpu space. + */ + this_cpu_write(doublefault_stack.tss.sp, + (unsigned long)&cea->doublefault_stack.stack + + sizeof(doublefault_stack.stack)); + + set_df_gdt_entry(cpu); +} diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c index 64a59d726639..8e3a8fedfa4d 100644 --- a/arch/x86/kernel/dumpstack_32.c +++ b/arch/x86/kernel/dumpstack_32.c @@ -29,6 +29,9 @@ const char *stack_type_name(enum stack_type type) if (type == STACK_TYPE_ENTRY) return "ENTRY_TRAMPOLINE"; + if (type == STACK_TYPE_EXCEPTION) + return "#DF"; + return NULL; } @@ -82,6 +85,30 @@ static bool in_softirq_stack(unsigned long *stack, struct stack_info *info) return true; } +static bool in_doublefault_stack(unsigned long *stack, struct stack_info *info) +{ +#ifdef CONFIG_DOUBLEFAULT + struct cpu_entry_area *cea = get_cpu_entry_area(raw_smp_processor_id()); + struct doublefault_stack *ss = &cea->doublefault_stack; + + void *begin = ss->stack; + void *end = begin + sizeof(ss->stack); + + if ((void *)stack < begin || (void *)stack >= end) + return false; + + info->type = STACK_TYPE_EXCEPTION; + info->begin = begin; + info->end = end; + info->next_sp = (unsigned long *)this_cpu_read(cpu_tss_rw.x86_tss.sp); + + return true; +#else + return false; +#endif +} + + int get_stack_info(unsigned long *stack, struct task_struct *task, struct stack_info *info, unsigned long *visit_mask) { @@ -105,6 +132,9 @@ int get_stack_info(unsigned long *stack, struct task_struct *task, if (in_softirq_stack(stack, info)) goto recursion_check; + if (in_doublefault_stack(stack, info)) + goto recursion_check; + goto unknown; recursion_check: diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 0bfe9a685b3b..c5399e80c59c 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -190,6 +190,7 @@ static void __init e820_print_type(enum e820_type type) case E820_TYPE_RAM: /* Fall through: */ case E820_TYPE_RESERVED_KERN: pr_cont("usable"); break; case E820_TYPE_RESERVED: pr_cont("reserved"); break; + case E820_TYPE_SOFT_RESERVED: pr_cont("soft reserved"); break; case E820_TYPE_ACPI: pr_cont("ACPI data"); break; case E820_TYPE_NVS: pr_cont("ACPI NVS"); break; case E820_TYPE_UNUSABLE: pr_cont("unusable"); break; @@ -1048,6 +1049,7 @@ static const char *__init e820_type_to_string(struct e820_entry *entry) case E820_TYPE_PRAM: return "Persistent Memory (legacy)"; case E820_TYPE_PMEM: return "Persistent Memory"; case E820_TYPE_RESERVED: return "Reserved"; + case E820_TYPE_SOFT_RESERVED: return "Soft Reserved"; default: return "Unknown E820 type"; } } @@ -1063,6 +1065,7 @@ static unsigned long __init e820_type_to_iomem_type(struct e820_entry *entry) case E820_TYPE_PRAM: /* Fall-through: */ case E820_TYPE_PMEM: /* Fall-through: */ case E820_TYPE_RESERVED: /* Fall-through: */ + case E820_TYPE_SOFT_RESERVED: /* Fall-through: */ default: return IORESOURCE_MEM; } } @@ -1075,6 +1078,7 @@ static unsigned long __init e820_type_to_iores_desc(struct e820_entry *entry) case E820_TYPE_PMEM: return IORES_DESC_PERSISTENT_MEMORY; case E820_TYPE_PRAM: return IORES_DESC_PERSISTENT_MEMORY_LEGACY; case E820_TYPE_RESERVED: return IORES_DESC_RESERVED; + case E820_TYPE_SOFT_RESERVED: return IORES_DESC_SOFT_RESERVED; case E820_TYPE_RESERVED_KERN: /* Fall-through: */ case E820_TYPE_RAM: /* Fall-through: */ case E820_TYPE_UNUSABLE: /* Fall-through: */ @@ -1089,11 +1093,12 @@ static bool __init do_mark_busy(enum e820_type type, struct resource *res) return true; /* - * Treat persistent memory like device memory, i.e. reserve it - * for exclusive use of a driver + * Treat persistent memory and other special memory ranges like + * device memory, i.e. reserve it for exclusive use of a driver */ switch (type) { case E820_TYPE_RESERVED: + case E820_TYPE_SOFT_RESERVED: case E820_TYPE_PRAM: case E820_TYPE_PMEM: return false; @@ -1296,6 +1301,9 @@ void __init e820__memblock_setup(void) if (end != (resource_size_t)end) continue; + if (entry->type == E820_TYPE_SOFT_RESERVED) + memblock_reserve(entry->addr, entry->size); + if (entry->type != E820_TYPE_RAM && entry->type != E820_TYPE_RESERVED_KERN) continue; diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index 108ee96f8b66..07c32d5447e4 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -607,6 +607,20 @@ void prepare_ftrace_return(unsigned long self_addr, unsigned long *parent, return; /* + * If the return location is actually pointing directly to + * the start of a direct trampoline (if we trace the trampoline + * it will still be offset by MCOUNT_INSN_SIZE), then the + * return address is actually off by one word, and we + * need to adjust for that. + */ + if (ftrace_direct_func_count) { + if (ftrace_find_direct_func(self_addr + MCOUNT_INSN_SIZE)) { + self_addr = *parent; + parent++; + } + } + + /* * Protect against fault, even if it shouldn't * happen. This tool is too much intrusive to * ignore such a protection. diff --git a/arch/x86/kernel/ftrace_64.S b/arch/x86/kernel/ftrace_64.S index 6e8961ca3605..369e61faacfe 100644 --- a/arch/x86/kernel/ftrace_64.S +++ b/arch/x86/kernel/ftrace_64.S @@ -85,6 +85,7 @@ movq %rdi, RDI(%rsp) movq %r8, R8(%rsp) movq %r9, R9(%rsp) + movq $0, ORIG_RAX(%rsp) /* * Save the original RBP. Even though the mcount ABI does not * require this, it helps out callers. @@ -111,7 +112,11 @@ subq $MCOUNT_INSN_SIZE, %rdi .endm -.macro restore_mcount_regs +.macro restore_mcount_regs save=0 + + /* ftrace_regs_caller or frame pointers require this */ + movq RBP(%rsp), %rbp + movq R9(%rsp), %r9 movq R8(%rsp), %r8 movq RDI(%rsp), %rdi @@ -120,10 +125,7 @@ movq RCX(%rsp), %rcx movq RAX(%rsp), %rax - /* ftrace_regs_caller can modify %rbp */ - movq RBP(%rsp), %rbp - - addq $MCOUNT_REG_SIZE, %rsp + addq $MCOUNT_REG_SIZE-\save, %rsp .endm @@ -174,6 +176,8 @@ SYM_FUNC_START(ftrace_regs_caller) /* Save the current flags before any operations that can change them */ pushfq + UNWIND_HINT_SAVE + /* added 8 bytes to save flags */ save_mcount_regs 8 /* save_mcount_regs fills in first two parameters */ @@ -226,7 +230,33 @@ SYM_INNER_LABEL(ftrace_regs_call, SYM_L_GLOBAL) movq R10(%rsp), %r10 movq RBX(%rsp), %rbx - restore_mcount_regs + movq ORIG_RAX(%rsp), %rax + movq %rax, MCOUNT_REG_SIZE-8(%rsp) + + /* If ORIG_RAX is anything but zero, make this a call to that */ + movq ORIG_RAX(%rsp), %rax + cmpq $0, %rax + je 1f + + /* Swap the flags with orig_rax */ + movq MCOUNT_REG_SIZE(%rsp), %rdi + movq %rdi, MCOUNT_REG_SIZE-8(%rsp) + movq %rax, MCOUNT_REG_SIZE(%rsp) + + restore_mcount_regs 8 + + jmp 2f + +1: restore_mcount_regs + + +2: + /* + * The stack layout is nondetermistic here, depending on which path was + * taken. This confuses objtool and ORC, rightfully so. For now, + * pretend the stack always looks like the non-direct case. + */ + UNWIND_HINT_RESTORE /* Restore flags */ popfq diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index 57de2ebff7e2..5dcedad21dff 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -140,7 +140,7 @@ rootfs_initcall(pci_iommu_init); static int via_no_dac_cb(struct pci_dev *pdev, void *data) { - pdev->dev.bus_dma_mask = DMA_BIT_MASK(32); + pdev->dev.bus_dma_limit = DMA_BIT_MASK(32); return 0; } diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index bd2a11ca5dd6..61e93a318983 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -377,37 +377,37 @@ static void tss_copy_io_bitmap(struct tss_struct *tss, struct io_bitmap *iobm) void tss_update_io_bitmap(void) { struct tss_struct *tss = this_cpu_ptr(&cpu_tss_rw); + struct thread_struct *t = ¤t->thread; u16 *base = &tss->x86_tss.io_bitmap_base; - if (test_thread_flag(TIF_IO_BITMAP)) { - struct thread_struct *t = ¤t->thread; - - if (IS_ENABLED(CONFIG_X86_IOPL_IOPERM) && t->iopl_emul == 3) { - *base = IO_BITMAP_OFFSET_VALID_ALL; - } else { - struct io_bitmap *iobm = t->io_bitmap; - /* - * Only copy bitmap data when the sequence number - * differs. The update time is accounted to the - * incoming task. - */ - if (tss->io_bitmap.prev_sequence != iobm->sequence) - tss_copy_io_bitmap(tss, iobm); - - /* Enable the bitmap */ - *base = IO_BITMAP_OFFSET_VALID_MAP; - } + if (!test_thread_flag(TIF_IO_BITMAP)) { + tss_invalidate_io_bitmap(tss); + return; + } + + if (IS_ENABLED(CONFIG_X86_IOPL_IOPERM) && t->iopl_emul == 3) { + *base = IO_BITMAP_OFFSET_VALID_ALL; + } else { + struct io_bitmap *iobm = t->io_bitmap; + /* - * Make sure that the TSS limit is covering the io bitmap. - * It might have been cut down by a VMEXIT to 0x67 which - * would cause a subsequent I/O access from user space to - * trigger a #GP because tbe bitmap is outside the TSS - * limit. + * Only copy bitmap data when the sequence number differs. The + * update time is accounted to the incoming task. */ - refresh_tss_limit(); - } else { - tss_invalidate_io_bitmap(tss); + if (tss->io_bitmap.prev_sequence != iobm->sequence) + tss_copy_io_bitmap(tss, iobm); + + /* Enable the bitmap */ + *base = IO_BITMAP_OFFSET_VALID_MAP; } + + /* + * Make sure that the TSS limit is covering the IO bitmap. It might have + * been cut down by a VMEXIT to 0x67 which would cause a subsequent I/O + * access from user space to trigger a #GP because tbe bitmap is outside + * the TSS limit. + */ + refresh_tss_limit(); } #else /* CONFIG_X86_IOPL_IOPERM */ static inline void switch_to_bitmap(unsigned long tifp) { } diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index 066e5b01a7e0..f0e1ddbc2fd7 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -182,6 +182,9 @@ static u16 get_segment_reg(struct task_struct *task, unsigned long offset) static int set_segment_reg(struct task_struct *task, unsigned long offset, u16 value) { + if (WARN_ON_ONCE(task == current)) + return -EIO; + /* * The value argument was already truncated to 16 bits. */ @@ -209,10 +212,7 @@ static int set_segment_reg(struct task_struct *task, break; case offsetof(struct user_regs_struct, gs): - if (task == current) - set_user_gs(task_pt_regs(task), value); - else - task_user_gs(task) = value; + task_user_gs(task) = value; } return 0; @@ -272,32 +272,41 @@ static u16 get_segment_reg(struct task_struct *task, unsigned long offset) static int set_segment_reg(struct task_struct *task, unsigned long offset, u16 value) { + if (WARN_ON_ONCE(task == current)) + return -EIO; + /* * The value argument was already truncated to 16 bits. */ if (invalid_selector(value)) return -EIO; + /* + * This function has some ABI oddities. + * + * A 32-bit ptracer probably expects that writing FS or GS will change + * FSBASE or GSBASE respectively. In the absence of FSGSBASE support, + * this code indeed has that effect. When FSGSBASE is added, this + * will require a special case. + * + * For existing 64-bit ptracers, writing FS or GS *also* currently + * changes the base if the selector is nonzero the next time the task + * is run. This behavior may not be needed, and trying to preserve it + * when FSGSBASE is added would be complicated at best. + */ + switch (offset) { case offsetof(struct user_regs_struct,fs): task->thread.fsindex = value; - if (task == current) - loadsegment(fs, task->thread.fsindex); break; case offsetof(struct user_regs_struct,gs): task->thread.gsindex = value; - if (task == current) - load_gs_index(task->thread.gsindex); break; case offsetof(struct user_regs_struct,ds): task->thread.ds = value; - if (task == current) - loadsegment(ds, task->thread.ds); break; case offsetof(struct user_regs_struct,es): task->thread.es = value; - if (task == current) - loadsegment(es, task->thread.es); break; /* @@ -375,6 +384,9 @@ static int putreg(struct task_struct *child, * When changing the FS base, use do_arch_prctl_64() * to set the index to zero and to set the base * as requested. + * + * NB: This behavior is nonsensical and likely needs to + * change when FSGSBASE support is added. */ if (child->thread.fsbase != value) return do_arch_prctl_64(child, ARCH_SET_FS, value); diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index d398afd206b8..cedfe2077a69 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -1138,17 +1138,15 @@ void __init setup_arch(char **cmdline_p) reserve_bios_regions(); - if (efi_enabled(EFI_MEMMAP)) { - efi_fake_memmap(); - efi_find_mirror(); - efi_esrt_init(); + efi_fake_memmap(); + efi_find_mirror(); + efi_esrt_init(); - /* - * The EFI specification says that boot service code won't be - * called after ExitBootServices(). This is, in fact, a lie. - */ - efi_reserve_boot_services(); - } + /* + * The EFI specification says that boot service code won't be + * called after ExitBootServices(). This is, in fact, a lie. + */ + efi_reserve_boot_services(); /* preallocate 4k for mptable mpc */ e820__memblock_alloc_reserved_mpc_new(); diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index 3451a004e162..f19de6f45d48 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -306,8 +306,23 @@ __visible void __noreturn handle_stack_overflow(const char *message, } #endif -#ifdef CONFIG_X86_64 -/* Runs on IST stack */ +#if defined(CONFIG_X86_64) || defined(CONFIG_DOUBLEFAULT) +/* + * Runs on an IST stack for x86_64 and on a special task stack for x86_32. + * + * On x86_64, this is more or less a normal kernel entry. Notwithstanding the + * SDM's warnings about double faults being unrecoverable, returning works as + * expected. Presumably what the SDM actually means is that the CPU may get + * the register state wrong on entry, so returning could be a bad idea. + * + * Various CPU engineers have promised that double faults due to an IRET fault + * while the stack is read-only are, in fact, recoverable. + * + * On x86_32, this is entered through a task gate, and regs are synthesized + * from the TSS. Returning is, in principle, okay, but changes to regs will + * be lost. If, for some reason, we need to return to a context with modified + * regs, the shim code could be adjusted to synchronize the registers. + */ dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code, unsigned long cr2) { static const char str[] = "double fault"; @@ -411,15 +426,9 @@ dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code, unsign handle_stack_overflow("kernel stack overflow (double-fault)", regs, cr2); #endif -#ifdef CONFIG_DOUBLEFAULT - df_debug(regs, error_code); -#endif - /* - * This is always a kernel trap and never fixable (and thus must - * never return). - */ - for (;;) - die(str, regs, error_code); + pr_emerg("PANIC: double fault, error_code: 0x%lx\n", error_code); + die("double fault", regs, error_code); + panic("Machine halted."); } #endif diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c index c0aa07487eb8..cfafa320a8cf 100644 --- a/arch/x86/kvm/cpuid.c +++ b/arch/x86/kvm/cpuid.c @@ -504,7 +504,7 @@ static inline int __do_cpuid_func(struct kvm_cpuid_entry2 *entry, u32 function, r = -E2BIG; - if (*nent >= maxnent) + if (WARN_ON(*nent >= maxnent)) goto out; do_host_cpuid(entry, function, 0); @@ -778,6 +778,11 @@ static inline int __do_cpuid_func(struct kvm_cpuid_entry2 *entry, u32 function, case 0x8000001a: case 0x8000001e: break; + /* Support memory encryption cpuid if host supports it */ + case 0x8000001F: + if (!boot_cpu_has(X86_FEATURE_SEV)) + entry->eax = entry->ebx = entry->ecx = entry->edx = 0; + break; /*Add support for Centaur's CPUID instruction*/ case 0xC0000000: /*Just support up to 0xC0000004 now*/ @@ -810,6 +815,9 @@ out: static int do_cpuid_func(struct kvm_cpuid_entry2 *entry, u32 func, int *nent, int maxnent, unsigned int type) { + if (*nent >= maxnent) + return -E2BIG; + if (type == KVM_GET_EMULATED_CPUID) return __do_cpuid_func_emulated(entry, func, nent, maxnent); diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index 362e874297e4..122d4ce3b1ab 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -5958,13 +5958,6 @@ static void svm_set_supported_cpuid(u32 func, struct kvm_cpuid_entry2 *entry) if (npt_enabled) entry->edx |= F(NPT); - break; - case 0x8000001F: - /* Support memory encryption cpuid if host supports it */ - if (boot_cpu_has(X86_FEATURE_SEV)) - cpuid(0x8000001f, &entry->eax, &entry->ebx, - &entry->ecx, &entry->edx); - } } diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c index 1b9ab4166397..e3394c839dea 100644 --- a/arch/x86/kvm/vmx/vmx.c +++ b/arch/x86/kvm/vmx/vmx.c @@ -6666,7 +6666,6 @@ static void vmx_free_vcpu(struct kvm_vcpu *vcpu) free_vpid(vmx->vpid); nested_vmx_free_vcpu(vcpu); free_loaded_vmcs(vmx->loaded_vmcs); - kfree(vmx->guest_msrs); kvm_vcpu_uninit(vcpu); kmem_cache_free(x86_fpu_cache, vmx->vcpu.arch.user_fpu); kmem_cache_free(x86_fpu_cache, vmx->vcpu.arch.guest_fpu); @@ -6723,12 +6722,7 @@ static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id) goto uninit_vcpu; } - vmx->guest_msrs = kmalloc(PAGE_SIZE, GFP_KERNEL_ACCOUNT); - BUILD_BUG_ON(ARRAY_SIZE(vmx_msr_index) * sizeof(vmx->guest_msrs[0]) - > PAGE_SIZE); - - if (!vmx->guest_msrs) - goto free_pml; + BUILD_BUG_ON(ARRAY_SIZE(vmx_msr_index) != NR_SHARED_MSRS); for (i = 0; i < ARRAY_SIZE(vmx_msr_index); ++i) { u32 index = vmx_msr_index[i]; @@ -6760,7 +6754,7 @@ static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id) err = alloc_loaded_vmcs(&vmx->vmcs01); if (err < 0) - goto free_msrs; + goto free_pml; msr_bitmap = vmx->vmcs01.msr_bitmap; vmx_disable_intercept_for_msr(msr_bitmap, MSR_IA32_TSC, MSR_TYPE_R); @@ -6822,8 +6816,6 @@ static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id) free_vmcs: free_loaded_vmcs(vmx->loaded_vmcs); -free_msrs: - kfree(vmx->guest_msrs); free_pml: vmx_destroy_pml_buffer(vmx); uninit_vcpu: diff --git a/arch/x86/kvm/vmx/vmx.h b/arch/x86/kvm/vmx/vmx.h index 7c1b978b2df4..a4f7f737c5d4 100644 --- a/arch/x86/kvm/vmx/vmx.h +++ b/arch/x86/kvm/vmx/vmx.h @@ -22,6 +22,12 @@ extern u32 get_umwait_control_msr(void); #define X2APIC_MSR(r) (APIC_BASE_MSR + ((r) >> 4)) +#ifdef CONFIG_X86_64 +#define NR_SHARED_MSRS 7 +#else +#define NR_SHARED_MSRS 4 +#endif + #define NR_LOADSTORE_MSRS 8 struct vmx_msrs { @@ -206,7 +212,7 @@ struct vcpu_vmx { u32 idt_vectoring_info; ulong rflags; - struct shared_msr_entry *guest_msrs; + struct shared_msr_entry guest_msrs[NR_SHARED_MSRS]; int nmsrs; int save_nmsrs; bool guest_msrs_ready; diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt index 0a0e9112f284..8908c58bd6cd 100644 --- a/arch/x86/lib/x86-opcode-map.txt +++ b/arch/x86/lib/x86-opcode-map.txt @@ -695,16 +695,28 @@ AVXcode: 2 4d: vrcp14ss/d Vsd,Hpd,Wsd (66),(ev) 4e: vrsqrt14ps/d Vpd,Wpd (66),(ev) 4f: vrsqrt14ss/d Vsd,Hsd,Wsd (66),(ev) -# Skip 0x50-0x57 +50: vpdpbusd Vx,Hx,Wx (66),(ev) +51: vpdpbusds Vx,Hx,Wx (66),(ev) +52: vdpbf16ps Vx,Hx,Wx (F3),(ev) | vpdpwssd Vx,Hx,Wx (66),(ev) | vp4dpwssd Vdqq,Hdqq,Wdq (F2),(ev) +53: vpdpwssds Vx,Hx,Wx (66),(ev) | vp4dpwssds Vdqq,Hdqq,Wdq (F2),(ev) +54: vpopcntb/w Vx,Wx (66),(ev) +55: vpopcntd/q Vx,Wx (66),(ev) 58: vpbroadcastd Vx,Wx (66),(v) 59: vpbroadcastq Vx,Wx (66),(v) | vbroadcasti32x2 Vx,Wx (66),(evo) 5a: vbroadcasti128 Vqq,Mdq (66),(v) | vbroadcasti32x4/64x2 Vx,Wx (66),(evo) 5b: vbroadcasti32x8/64x4 Vqq,Mdq (66),(ev) -# Skip 0x5c-0x63 +# Skip 0x5c-0x61 +62: vpexpandb/w Vx,Wx (66),(ev) +63: vpcompressb/w Wx,Vx (66),(ev) 64: vpblendmd/q Vx,Hx,Wx (66),(ev) 65: vblendmps/d Vx,Hx,Wx (66),(ev) 66: vpblendmb/w Vx,Hx,Wx (66),(ev) -# Skip 0x67-0x74 +68: vp2intersectd/q Kx,Hx,Wx (F2),(ev) +# Skip 0x69-0x6f +70: vpshldvw Vx,Hx,Wx (66),(ev) +71: vpshldvd/q Vx,Hx,Wx (66),(ev) +72: vcvtne2ps2bf16 Vx,Hx,Wx (F2),(ev) | vcvtneps2bf16 Vx,Wx (F3),(ev) | vpshrdvw Vx,Hx,Wx (66),(ev) +73: vpshrdvd/q Vx,Hx,Wx (66),(ev) 75: vpermi2b/w Vx,Hx,Wx (66),(ev) 76: vpermi2d/q Vx,Hx,Wx (66),(ev) 77: vpermi2ps/d Vx,Hx,Wx (66),(ev) @@ -727,6 +739,7 @@ AVXcode: 2 8c: vpmaskmovd/q Vx,Hx,Mx (66),(v) 8d: vpermb/w Vx,Hx,Wx (66),(ev) 8e: vpmaskmovd/q Mx,Vx,Hx (66),(v) +8f: vpshufbitqmb Kx,Hx,Wx (66),(ev) # 0x0f 0x38 0x90-0xbf (FMA) 90: vgatherdd/q Vx,Hx,Wx (66),(v) | vpgatherdd/q Vx,Wx (66),(evo) 91: vgatherqd/q Vx,Hx,Wx (66),(v) | vpgatherqd/q Vx,Wx (66),(evo) @@ -738,8 +751,8 @@ AVXcode: 2 97: vfmsubadd132ps/d Vx,Hx,Wx (66),(v) 98: vfmadd132ps/d Vx,Hx,Wx (66),(v) 99: vfmadd132ss/d Vx,Hx,Wx (66),(v),(v1) -9a: vfmsub132ps/d Vx,Hx,Wx (66),(v) -9b: vfmsub132ss/d Vx,Hx,Wx (66),(v),(v1) +9a: vfmsub132ps/d Vx,Hx,Wx (66),(v) | v4fmaddps Vdqq,Hdqq,Wdq (F2),(ev) +9b: vfmsub132ss/d Vx,Hx,Wx (66),(v),(v1) | v4fmaddss Vdq,Hdq,Wdq (F2),(ev) 9c: vfnmadd132ps/d Vx,Hx,Wx (66),(v) 9d: vfnmadd132ss/d Vx,Hx,Wx (66),(v),(v1) 9e: vfnmsub132ps/d Vx,Hx,Wx (66),(v) @@ -752,8 +765,8 @@ a6: vfmaddsub213ps/d Vx,Hx,Wx (66),(v) a7: vfmsubadd213ps/d Vx,Hx,Wx (66),(v) a8: vfmadd213ps/d Vx,Hx,Wx (66),(v) a9: vfmadd213ss/d Vx,Hx,Wx (66),(v),(v1) -aa: vfmsub213ps/d Vx,Hx,Wx (66),(v) -ab: vfmsub213ss/d Vx,Hx,Wx (66),(v),(v1) +aa: vfmsub213ps/d Vx,Hx,Wx (66),(v) | v4fnmaddps Vdqq,Hdqq,Wdq (F2),(ev) +ab: vfmsub213ss/d Vx,Hx,Wx (66),(v),(v1) | v4fnmaddss Vdq,Hdq,Wdq (F2),(ev) ac: vfnmadd213ps/d Vx,Hx,Wx (66),(v) ad: vfnmadd213ss/d Vx,Hx,Wx (66),(v),(v1) ae: vfnmsub213ps/d Vx,Hx,Wx (66),(v) @@ -780,11 +793,12 @@ ca: sha1msg2 Vdq,Wdq | vrcp28ps/d Vx,Wx (66),(ev) cb: sha256rnds2 Vdq,Wdq | vrcp28ss/d Vx,Hx,Wx (66),(ev) cc: sha256msg1 Vdq,Wdq | vrsqrt28ps/d Vx,Wx (66),(ev) cd: sha256msg2 Vdq,Wdq | vrsqrt28ss/d Vx,Hx,Wx (66),(ev) +cf: vgf2p8mulb Vx,Wx (66) db: VAESIMC Vdq,Wdq (66),(v1) -dc: VAESENC Vdq,Hdq,Wdq (66),(v1) -dd: VAESENCLAST Vdq,Hdq,Wdq (66),(v1) -de: VAESDEC Vdq,Hdq,Wdq (66),(v1) -df: VAESDECLAST Vdq,Hdq,Wdq (66),(v1) +dc: vaesenc Vx,Hx,Wx (66) +dd: vaesenclast Vx,Hx,Wx (66) +de: vaesdec Vx,Hx,Wx (66) +df: vaesdeclast Vx,Hx,Wx (66) f0: MOVBE Gy,My | MOVBE Gw,Mw (66) | CRC32 Gd,Eb (F2) | CRC32 Gd,Eb (66&F2) f1: MOVBE My,Gy | MOVBE Mw,Gw (66) | CRC32 Gd,Ey (F2) | CRC32 Gd,Ew (66&F2) f2: ANDN Gy,By,Ey (v) @@ -848,7 +862,7 @@ AVXcode: 3 41: vdppd Vdq,Hdq,Wdq,Ib (66),(v1) 42: vmpsadbw Vx,Hx,Wx,Ib (66),(v1) | vdbpsadbw Vx,Hx,Wx,Ib (66),(evo) 43: vshufi32x4/64x2 Vx,Hx,Wx,Ib (66),(ev) -44: vpclmulqdq Vdq,Hdq,Wdq,Ib (66),(v1) +44: vpclmulqdq Vx,Hx,Wx,Ib (66) 46: vperm2i128 Vqq,Hqq,Wqq,Ib (66),(v) 4a: vblendvps Vx,Hx,Wx,Lx (66),(v) 4b: vblendvpd Vx,Hx,Wx,Lx (66),(v) @@ -865,7 +879,13 @@ AVXcode: 3 63: vpcmpistri Vdq,Wdq,Ib (66),(v1) 66: vfpclassps/d Vk,Wx,Ib (66),(ev) 67: vfpclassss/d Vk,Wx,Ib (66),(ev) +70: vpshldw Vx,Hx,Wx,Ib (66),(ev) +71: vpshldd/q Vx,Hx,Wx,Ib (66),(ev) +72: vpshrdw Vx,Hx,Wx,Ib (66),(ev) +73: vpshrdd/q Vx,Hx,Wx,Ib (66),(ev) cc: sha1rnds4 Vdq,Wdq,Ib +ce: vgf2p8affineqb Vx,Wx,Ib (66) +cf: vgf2p8affineinvqb Vx,Wx,Ib (66) df: VAESKEYGEN Vdq,Wdq,Ib (66),(v1) f0: RORX Gy,Ey,Ib (F2),(v) EndTable diff --git a/arch/x86/mm/cpu_entry_area.c b/arch/x86/mm/cpu_entry_area.c index 82ead8e27888..56f9189bbadb 100644 --- a/arch/x86/mm/cpu_entry_area.c +++ b/arch/x86/mm/cpu_entry_area.c @@ -17,6 +17,10 @@ static DEFINE_PER_CPU_PAGE_ALIGNED(struct exception_stacks, exception_stacks); DEFINE_PER_CPU(struct cea_exception_stacks*, cea_exception_stacks); #endif +#if defined(CONFIG_X86_32) && defined(CONFIG_DOUBLEFAULT) +DECLARE_PER_CPU_PAGE_ALIGNED(struct doublefault_stack, doublefault_stack); +#endif + struct cpu_entry_area *get_cpu_entry_area(int cpu) { unsigned long va = CPU_ENTRY_AREA_PER_CPU + cpu * CPU_ENTRY_AREA_SIZE; @@ -108,7 +112,15 @@ static void __init percpu_setup_exception_stacks(unsigned int cpu) cea_map_stack(MCE); } #else -static inline void percpu_setup_exception_stacks(unsigned int cpu) {} +static inline void percpu_setup_exception_stacks(unsigned int cpu) +{ +#ifdef CONFIG_DOUBLEFAULT + struct cpu_entry_area *cea = get_cpu_entry_area(cpu); + + cea_map_percpu_pages(&cea->doublefault_stack, + &per_cpu(doublefault_stack, cpu), 1, PAGE_KERNEL); +#endif +} #endif /* Setup the fixmap mappings only once per-processor */ diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index 9ceacd1156db..304d31d8cbbc 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -197,7 +197,7 @@ void vmalloc_sync_all(void) return; for (address = VMALLOC_START & PMD_MASK; - address >= TASK_SIZE_MAX && address < FIXADDR_TOP; + address >= TASK_SIZE_MAX && address < VMALLOC_END; address += PMD_SIZE) { struct page *page; diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 1ff9c2030b4f..b3a2936377b5 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -280,11 +280,11 @@ err_free_memtype: } /** - * ioremap_nocache - map bus memory into CPU space + * ioremap - map bus memory into CPU space * @phys_addr: bus address of the memory * @size: size of the resource to map * - * ioremap_nocache performs a platform specific sequence of operations to + * ioremap performs a platform specific sequence of operations to * make bus memory CPU accessible via the readb/readw/readl/writeb/ * writew/writel functions and the other mmio helpers. The returned * address is not guaranteed to be usable directly as a virtual @@ -300,7 +300,7 @@ err_free_memtype: * * Must be freed with iounmap. */ -void __iomem *ioremap_nocache(resource_size_t phys_addr, unsigned long size) +void __iomem *ioremap(resource_size_t phys_addr, unsigned long size) { /* * Ideally, this should be: @@ -315,7 +315,7 @@ void __iomem *ioremap_nocache(resource_size_t phys_addr, unsigned long size) return __ioremap_caller(phys_addr, size, pcm, __builtin_return_address(0), false); } -EXPORT_SYMBOL(ioremap_nocache); +EXPORT_SYMBOL(ioremap); /** * ioremap_uc - map bus memory into CPU space as strongly uncachable diff --git a/arch/x86/mm/kasan_init_64.c b/arch/x86/mm/kasan_init_64.c index 296da58f3013..cf5bc37c90ac 100644 --- a/arch/x86/mm/kasan_init_64.c +++ b/arch/x86/mm/kasan_init_64.c @@ -245,6 +245,49 @@ static void __init kasan_map_early_shadow(pgd_t *pgd) } while (pgd++, addr = next, addr != end); } +static void __init kasan_shallow_populate_p4ds(pgd_t *pgd, + unsigned long addr, + unsigned long end) +{ + p4d_t *p4d; + unsigned long next; + void *p; + + p4d = p4d_offset(pgd, addr); + do { + next = p4d_addr_end(addr, end); + + if (p4d_none(*p4d)) { + p = early_alloc(PAGE_SIZE, NUMA_NO_NODE, true); + p4d_populate(&init_mm, p4d, p); + } + } while (p4d++, addr = next, addr != end); +} + +static void __init kasan_shallow_populate_pgds(void *start, void *end) +{ + unsigned long addr, next; + pgd_t *pgd; + void *p; + + addr = (unsigned long)start; + pgd = pgd_offset_k(addr); + do { + next = pgd_addr_end(addr, (unsigned long)end); + + if (pgd_none(*pgd)) { + p = early_alloc(PAGE_SIZE, NUMA_NO_NODE, true); + pgd_populate(&init_mm, pgd, p); + } + + /* + * we need to populate p4ds to be synced when running in + * four level mode - see sync_global_pgds_l4() + */ + kasan_shallow_populate_p4ds(pgd, addr, next); + } while (pgd++, addr = next, addr != (unsigned long)end); +} + #ifdef CONFIG_KASAN_INLINE static int kasan_die_handler(struct notifier_block *self, unsigned long val, @@ -354,6 +397,24 @@ void __init kasan_init(void) kasan_populate_early_shadow( kasan_mem_to_shadow((void *)PAGE_OFFSET + MAXMEM), + kasan_mem_to_shadow((void *)VMALLOC_START)); + + /* + * If we're in full vmalloc mode, don't back vmalloc space with early + * shadow pages. Instead, prepopulate pgds/p4ds so they are synced to + * the global table and we can populate the lower levels on demand. + */ + if (IS_ENABLED(CONFIG_KASAN_VMALLOC)) + kasan_shallow_populate_pgds( + kasan_mem_to_shadow((void *)VMALLOC_START), + kasan_mem_to_shadow((void *)VMALLOC_END)); + else + kasan_populate_early_shadow( + kasan_mem_to_shadow((void *)VMALLOC_START), + kasan_mem_to_shadow((void *)VMALLOC_END)); + + kasan_populate_early_shadow( + kasan_mem_to_shadow((void *)VMALLOC_END + 1), shadow_cpu_entry_begin); kasan_populate_shadow((unsigned long)shadow_cpu_entry_begin, diff --git a/arch/x86/mm/mem_encrypt.c b/arch/x86/mm/mem_encrypt.c index 9268c12458c8..a03614bd3e1a 100644 --- a/arch/x86/mm/mem_encrypt.c +++ b/arch/x86/mm/mem_encrypt.c @@ -367,7 +367,7 @@ bool force_dma_unencrypted(struct device *dev) if (sme_active()) { u64 dma_enc_mask = DMA_BIT_MASK(__ffs64(sme_me_mask)); u64 dma_dev_mask = min_not_zero(dev->coherent_dma_mask, - dev->bus_dma_mask); + dev->bus_dma_limit); if (dma_dev_mask <= dma_enc_mask) return true; diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 0d09cc5aad61..1b99ad05b117 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -1784,7 +1784,7 @@ static inline int cpa_clear_pages_array(struct page **pages, int numpages, int _set_memory_uc(unsigned long addr, int numpages) { /* - * for now UC MINUS. see comments in ioremap_nocache() + * for now UC MINUS. see comments in ioremap() * If you really need strong UC use ioremap_uc(), but note * that you cannot override IO areas with set_memory_*() as * these helpers cannot work with IO memory. @@ -1799,7 +1799,7 @@ int set_memory_uc(unsigned long addr, int numpages) int ret; /* - * for now UC MINUS. see comments in ioremap_nocache() + * for now UC MINUS. see comments in ioremap() */ ret = reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE, _PAGE_CACHE_MODE_UC_MINUS, NULL); diff --git a/arch/x86/mm/pat_interval.c b/arch/x86/mm/pat_interval.c index 47a1bf30748f..6855362eaf21 100644 --- a/arch/x86/mm/pat_interval.c +++ b/arch/x86/mm/pat_interval.c @@ -56,7 +56,7 @@ static struct memtype *memtype_match(u64 start, u64 end, int match_type) { struct memtype *match; - match = memtype_interval_iter_first(&memtype_rbroot, start, end); + match = memtype_interval_iter_first(&memtype_rbroot, start, end-1); while (match != NULL && match->start < end) { if ((match_type == MEMTYPE_EXACT_MATCH) && (match->start == start) && (match->end == end)) @@ -66,7 +66,7 @@ static struct memtype *memtype_match(u64 start, u64 end, int match_type) (match->start < start) && (match->end == end)) return match; - match = memtype_interval_iter_next(match, start, end); + match = memtype_interval_iter_next(match, start, end-1); } return NULL; /* Returns NULL if there is no match */ @@ -79,7 +79,7 @@ static int memtype_check_conflict(u64 start, u64 end, struct memtype *match; enum page_cache_mode found_type = reqtype; - match = memtype_interval_iter_first(&memtype_rbroot, start, end); + match = memtype_interval_iter_first(&memtype_rbroot, start, end-1); if (match == NULL) goto success; @@ -89,12 +89,12 @@ static int memtype_check_conflict(u64 start, u64 end, dprintk("Overlap at 0x%Lx-0x%Lx\n", match->start, match->end); found_type = match->type; - match = memtype_interval_iter_next(match, start, end); + match = memtype_interval_iter_next(match, start, end-1); while (match) { if (match->type != found_type) goto failure; - match = memtype_interval_iter_next(match, start, end); + match = memtype_interval_iter_next(match, start, end-1); } success: if (newtype) @@ -160,7 +160,7 @@ struct memtype *memtype_erase(u64 start, u64 end) struct memtype *memtype_lookup(u64 addr) { return memtype_interval_iter_first(&memtype_rbroot, addr, - addr + PAGE_SIZE); + addr + PAGE_SIZE-1); } #if defined(CONFIG_DEBUG_FS) diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile index c806b57d3f22..48bcada5cabe 100644 --- a/arch/x86/pci/Makefile +++ b/arch/x86/pci/Makefile @@ -24,6 +24,4 @@ obj-y += bus_numa.o obj-$(CONFIG_AMD_NB) += amd_bus.o obj-$(CONFIG_PCI_CNB20LE_QUIRK) += broadcom_bus.o -ifeq ($(CONFIG_PCI_DEBUG),y) -EXTRA_CFLAGS += -DDEBUG -endif +ccflags-$(CONFIG_PCI_DEBUG) += -DDEBUG diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 9acab6ac28f5..1e59df041456 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -135,7 +135,7 @@ static void pcibios_fixup_device_resources(struct pci_dev *dev) * resource so the kernel doesn't attempt to assign * it later on in pci_assign_unassigned_resources */ - for (bar = 0; bar <= PCI_STD_RESOURCE_END; bar++) { + for (bar = 0; bar < PCI_STD_NUM_BARS; bar++) { bar_r = &dev->resource[bar]; if (bar_r->start == 0 && bar_r->end != 0) { bar_r->flags = 0; diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c index 527e69b12002..e723559c386a 100644 --- a/arch/x86/pci/fixup.c +++ b/arch/x86/pci/fixup.c @@ -589,6 +589,17 @@ static void pci_fixup_amd_ehci_pme(struct pci_dev *dev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x7808, pci_fixup_amd_ehci_pme); /* + * Device [1022:7914] + * When in D0, PME# doesn't get asserted when plugging USB 2.0 device. + */ +static void pci_fixup_amd_fch_xhci_pme(struct pci_dev *dev) +{ + dev_info(&dev->dev, "PME# does not work under D0, disabling it\n"); + dev->pme_support &= ~(PCI_PM_CAP_PME_D0 >> PCI_PM_CAP_PME_SHIFT); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x7914, pci_fixup_amd_fch_xhci_pme); + +/* * Apple MacBook Pro: Avoid [mem 0x7fa00000-0x7fbfffff] * * Using the [mem 0x7fa00000-0x7fbfffff] region, e.g., by assigning it to diff --git a/arch/x86/pci/intel_mid_pci.c b/arch/x86/pci/intel_mid_pci.c index 43867bc85368..00c62115f39c 100644 --- a/arch/x86/pci/intel_mid_pci.c +++ b/arch/x86/pci/intel_mid_pci.c @@ -382,7 +382,7 @@ static void pci_fixed_bar_fixup(struct pci_dev *dev) PCI_DEVFN(2, 2) == dev->devfn) return; - for (i = 0; i < PCI_ROM_RESOURCE; i++) { + for (i = 0; i < PCI_STD_NUM_BARS; i++) { pci_read_config_dword(dev, offset + 8 + (i * 4), &size); dev->resource[i].end = dev->resource[i].start + size - 1; dev->resource[i].flags |= IORESOURCE_PCI_FIXED; diff --git a/arch/x86/pci/numachip.c b/arch/x86/pci/numachip.c index 2e565e65c893..01a085d9135a 100644 --- a/arch/x86/pci/numachip.c +++ b/arch/x86/pci/numachip.c @@ -1,8 +1,5 @@ +// SPDX-License-Identifier: GPL-2.0 /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * * Numascale NumaConnect-specific PCI code * * Copyright (C) 2012 Numascale AS. All rights reserved. diff --git a/arch/x86/pci/sta2x11-fixup.c b/arch/x86/pci/sta2x11-fixup.c index 6269a175385d..c313d784efab 100644 --- a/arch/x86/pci/sta2x11-fixup.c +++ b/arch/x86/pci/sta2x11-fixup.c @@ -30,7 +30,6 @@ struct sta2x11_ahb_regs { /* saved during suspend */ }; struct sta2x11_mapping { - u32 amba_base; int is_suspended; struct sta2x11_ahb_regs regs[STA2X11_NR_FUNCS]; }; @@ -92,18 +91,6 @@ static int sta2x11_pdev_to_ep(struct pci_dev *pdev) return pdev->bus->number - instance->bus0; } -static struct sta2x11_mapping *sta2x11_pdev_to_mapping(struct pci_dev *pdev) -{ - struct sta2x11_instance *instance; - int ep; - - instance = sta2x11_pdev_to_instance(pdev); - if (!instance) - return NULL; - ep = sta2x11_pdev_to_ep(pdev); - return instance->map + ep; -} - /* This is exported, as some devices need to access the MFD registers */ struct sta2x11_instance *sta2x11_get_instance(struct pci_dev *pdev) { @@ -111,39 +98,6 @@ struct sta2x11_instance *sta2x11_get_instance(struct pci_dev *pdev) } EXPORT_SYMBOL(sta2x11_get_instance); - -/** - * p2a - Translate physical address to STA2x11 AMBA address, - * used for DMA transfers to STA2x11 - * @p: Physical address - * @pdev: PCI device (must be hosted within the connext) - */ -static dma_addr_t p2a(dma_addr_t p, struct pci_dev *pdev) -{ - struct sta2x11_mapping *map; - dma_addr_t a; - - map = sta2x11_pdev_to_mapping(pdev); - a = p + map->amba_base; - return a; -} - -/** - * a2p - Translate STA2x11 AMBA address to physical address - * used for DMA transfers from STA2x11 - * @a: STA2x11 AMBA address - * @pdev: PCI device (must be hosted within the connext) - */ -static dma_addr_t a2p(dma_addr_t a, struct pci_dev *pdev) -{ - struct sta2x11_mapping *map; - dma_addr_t p; - - map = sta2x11_pdev_to_mapping(pdev); - p = a - map->amba_base; - return p; -} - /* At setup time, we use our own ops if the device is a ConneXt one */ static void sta2x11_setup_pdev(struct pci_dev *pdev) { @@ -151,9 +105,6 @@ static void sta2x11_setup_pdev(struct pci_dev *pdev) if (!instance) /* either a sta2x11 bridge or another ST device */ return; - pci_set_consistent_dma_mask(pdev, STA2X11_AMBA_SIZE - 1); - pci_set_dma_mask(pdev, STA2X11_AMBA_SIZE - 1); - pdev->dev.archdata.is_sta2x11 = true; /* We must enable all devices as master, for audio DMA to work */ pci_set_master(pdev); @@ -161,61 +112,6 @@ static void sta2x11_setup_pdev(struct pci_dev *pdev) DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_STMICRO, PCI_ANY_ID, sta2x11_setup_pdev); /* - * The following three functions are exported (used in swiotlb: FIXME) - */ -/** - * dma_capable - Check if device can manage DMA transfers (FIXME: kill it) - * @dev: device for a PCI device - * @addr: DMA address - * @size: DMA size - */ -bool dma_capable(struct device *dev, dma_addr_t addr, size_t size) -{ - struct sta2x11_mapping *map; - - if (!dev->archdata.is_sta2x11) { - if (!dev->dma_mask) - return false; - return addr + size - 1 <= *dev->dma_mask; - } - - map = sta2x11_pdev_to_mapping(to_pci_dev(dev)); - - if (!map || (addr < map->amba_base)) - return false; - if (addr + size >= map->amba_base + STA2X11_AMBA_SIZE) { - return false; - } - - return true; -} - -/** - * __phys_to_dma - Return the DMA AMBA address used for this STA2x11 device - * @dev: device for a PCI device - * @paddr: Physical address - */ -dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr) -{ - if (!dev->archdata.is_sta2x11) - return paddr; - return p2a(paddr, to_pci_dev(dev)); -} - -/** - * dma_to_phys - Return the physical address used for this STA2x11 DMA address - * @dev: device for a PCI device - * @daddr: STA2x11 AMBA DMA address - */ -phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr) -{ - if (!dev->archdata.is_sta2x11) - return daddr; - return a2p(daddr, to_pci_dev(dev)); -} - - -/* * At boot we must set up the mappings for the pcie-to-amba bridge. * It involves device access, and the same happens at suspend/resume time */ @@ -234,12 +130,22 @@ phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr) /* At probe time, enable mapping for each endpoint, using the pdev */ static void sta2x11_map_ep(struct pci_dev *pdev) { - struct sta2x11_mapping *map = sta2x11_pdev_to_mapping(pdev); + struct sta2x11_instance *instance = sta2x11_pdev_to_instance(pdev); + struct device *dev = &pdev->dev; + u32 amba_base, max_amba_addr; int i; - if (!map) + if (!instance) return; - pci_read_config_dword(pdev, AHB_BASE(0), &map->amba_base); + + pci_read_config_dword(pdev, AHB_BASE(0), &amba_base); + max_amba_addr = amba_base + STA2X11_AMBA_SIZE - 1; + + dev->dma_pfn_offset = PFN_DOWN(-amba_base); + + dev->bus_dma_limit = max_amba_addr; + pci_set_consistent_dma_mask(pdev, max_amba_addr); + pci_set_dma_mask(pdev, max_amba_addr); /* Configure AHB mapping */ pci_write_config_dword(pdev, AHB_PEXLBASE(0), 0); @@ -253,13 +159,24 @@ static void sta2x11_map_ep(struct pci_dev *pdev) dev_info(&pdev->dev, "sta2x11: Map EP %i: AMBA address %#8x-%#8x\n", - sta2x11_pdev_to_ep(pdev), map->amba_base, - map->amba_base + STA2X11_AMBA_SIZE - 1); + sta2x11_pdev_to_ep(pdev), amba_base, max_amba_addr); } DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_STMICRO, PCI_ANY_ID, sta2x11_map_ep); #ifdef CONFIG_PM /* Some register values must be saved and restored */ +static struct sta2x11_mapping *sta2x11_pdev_to_mapping(struct pci_dev *pdev) +{ + struct sta2x11_instance *instance; + int ep; + + instance = sta2x11_pdev_to_instance(pdev); + if (!instance) + return NULL; + ep = sta2x11_pdev_to_ep(pdev); + return instance->map + ep; +} + static void suspend_mapping(struct pci_dev *pdev) { struct sta2x11_mapping *map = sta2x11_pdev_to_mapping(pdev); diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 425e025341db..38d44f36d5ed 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -128,6 +128,9 @@ void __init efi_find_mirror(void) efi_memory_desc_t *md; u64 mirror_size = 0, total_size = 0; + if (!efi_enabled(EFI_MEMMAP)) + return; + for_each_efi_memory_desc(md) { unsigned long long start = md->phys_addr; unsigned long long size = md->num_pages << EFI_PAGE_SHIFT; @@ -145,14 +148,18 @@ void __init efi_find_mirror(void) /* * Tell the kernel about the EFI memory map. This might include - * more than the max 128 entries that can fit in the e820 legacy - * (zeropage) memory map. + * more than the max 128 entries that can fit in the passed in e820 + * legacy (zeropage) memory map, but the kernel's e820 table can hold + * E820_MAX_ENTRIES. */ static void __init do_add_efi_memmap(void) { efi_memory_desc_t *md; + if (!efi_enabled(EFI_MEMMAP)) + return; + for_each_efi_memory_desc(md) { unsigned long long start = md->phys_addr; unsigned long long size = md->num_pages << EFI_PAGE_SHIFT; @@ -164,7 +171,10 @@ static void __init do_add_efi_memmap(void) case EFI_BOOT_SERVICES_CODE: case EFI_BOOT_SERVICES_DATA: case EFI_CONVENTIONAL_MEMORY: - if (md->attribute & EFI_MEMORY_WB) + if (efi_soft_reserve_enabled() + && (md->attribute & EFI_MEMORY_SP)) + e820_type = E820_TYPE_SOFT_RESERVED; + else if (md->attribute & EFI_MEMORY_WB) e820_type = E820_TYPE_RAM; else e820_type = E820_TYPE_RESERVED; @@ -190,11 +200,36 @@ static void __init do_add_efi_memmap(void) e820_type = E820_TYPE_RESERVED; break; } + e820__range_add(start, size, e820_type); } e820__update_table(e820_table); } +/* + * Given add_efi_memmap defaults to 0 and there there is no alternative + * e820 mechanism for soft-reserved memory, import the full EFI memory + * map if soft reservations are present and enabled. Otherwise, the + * mechanism to disable the kernel's consideration of EFI_MEMORY_SP is + * the efi=nosoftreserve option. + */ +static bool do_efi_soft_reserve(void) +{ + efi_memory_desc_t *md; + + if (!efi_enabled(EFI_MEMMAP)) + return false; + + if (!efi_soft_reserve_enabled()) + return false; + + for_each_efi_memory_desc(md) + if (md->type == EFI_CONVENTIONAL_MEMORY && + (md->attribute & EFI_MEMORY_SP)) + return true; + return false; +} + int __init efi_memblock_x86_reserve_range(void) { struct efi_info *e = &boot_params.efi_info; @@ -224,9 +259,11 @@ int __init efi_memblock_x86_reserve_range(void) if (rv) return rv; - if (add_efi_memmap) + if (add_efi_memmap || do_efi_soft_reserve()) do_add_efi_memmap(); + efi_fake_memmap_early(); + WARN(efi.memmap.desc_version != 1, "Unexpected EFI_MEMORY_DESCRIPTOR version %ld", efi.memmap.desc_version); @@ -779,6 +816,15 @@ static bool should_map_region(efi_memory_desc_t *md) return false; /* + * EFI specific purpose memory may be reserved by default + * depending on kernel config and boot options. + */ + if (md->type == EFI_CONVENTIONAL_MEMORY && + efi_soft_reserve_enabled() && + (md->attribute & EFI_MEMORY_SP)) + return false; + + /* * Map all of RAM so that we can access arguments in the 1:1 * mapping when making EFI runtime calls. */ diff --git a/arch/x86/platform/efi/quirks.c b/arch/x86/platform/efi/quirks.c index 3b9fd679cea9..7675cf754d90 100644 --- a/arch/x86/platform/efi/quirks.c +++ b/arch/x86/platform/efi/quirks.c @@ -320,6 +320,9 @@ void __init efi_reserve_boot_services(void) { efi_memory_desc_t *md; + if (!efi_enabled(EFI_MEMMAP)) + return; + for_each_efi_memory_desc(md) { u64 start = md->phys_addr; u64 size = md->num_pages << EFI_PAGE_SHIFT; diff --git a/arch/x86/platform/olpc/olpc-xo1-pm.c b/arch/x86/platform/olpc/olpc-xo1-pm.c index e1a32062a375..f067ac780ba7 100644 --- a/arch/x86/platform/olpc/olpc-xo1-pm.c +++ b/arch/x86/platform/olpc/olpc-xo1-pm.c @@ -12,7 +12,6 @@ #include <linux/platform_device.h> #include <linux/export.h> #include <linux/pm.h> -#include <linux/mfd/core.h> #include <linux/suspend.h> #include <linux/olpc-ec.h> @@ -120,16 +119,11 @@ static const struct platform_suspend_ops xo1_suspend_ops = { static int xo1_pm_probe(struct platform_device *pdev) { struct resource *res; - int err; /* don't run on non-XOs */ if (!machine_is_olpc()) return -ENODEV; - err = mfd_cell_enable(pdev); - if (err) - return err; - res = platform_get_resource(pdev, IORESOURCE_IO, 0); if (!res) { dev_err(&pdev->dev, "can't fetch device resource info\n"); @@ -152,8 +146,6 @@ static int xo1_pm_probe(struct platform_device *pdev) static int xo1_pm_remove(struct platform_device *pdev) { - mfd_cell_disable(pdev); - if (strcmp(pdev->name, "cs5535-pms") == 0) pms_base = 0; else if (strcmp(pdev->name, "olpc-xo1-pm-acpi") == 0) diff --git a/arch/x86/platform/olpc/olpc-xo1-sci.c b/arch/x86/platform/olpc/olpc-xo1-sci.c index 99a28ce2244c..933dd4fe3a97 100644 --- a/arch/x86/platform/olpc/olpc-xo1-sci.c +++ b/arch/x86/platform/olpc/olpc-xo1-sci.c @@ -15,7 +15,6 @@ #include <linux/platform_device.h> #include <linux/pm.h> #include <linux/pm_wakeup.h> -#include <linux/mfd/core.h> #include <linux/power_supply.h> #include <linux/suspend.h> #include <linux/workqueue.h> @@ -537,10 +536,6 @@ static int xo1_sci_probe(struct platform_device *pdev) if (!machine_is_olpc()) return -ENODEV; - r = mfd_cell_enable(pdev); - if (r) - return r; - res = platform_get_resource(pdev, IORESOURCE_IO, 0); if (!res) { dev_err(&pdev->dev, "can't fetch device resource info\n"); @@ -605,7 +600,6 @@ err_ebook: static int xo1_sci_remove(struct platform_device *pdev) { - mfd_cell_disable(pdev); free_irq(sci_irq, pdev); cancel_work_sync(&sci_work); free_ec_sci(); diff --git a/arch/x86/um/vdso/um_vdso.c b/arch/x86/um/vdso/um_vdso.c index 891868756a51..2112b8d14668 100644 --- a/arch/x86/um/vdso/um_vdso.c +++ b/arch/x86/um/vdso/um_vdso.c @@ -13,7 +13,7 @@ #include <linux/getcpu.h> #include <asm/unistd.h> -int __vdso_clock_gettime(clockid_t clock, struct timespec *ts) +int __vdso_clock_gettime(clockid_t clock, struct __kernel_old_timespec *ts) { long ret; @@ -22,10 +22,10 @@ int __vdso_clock_gettime(clockid_t clock, struct timespec *ts) return ret; } -int clock_gettime(clockid_t, struct timespec *) +int clock_gettime(clockid_t, struct __kernel_old_timespec *) __attribute__((weak, alias("__vdso_clock_gettime"))); -int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz) +int __vdso_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz) { long ret; @@ -34,10 +34,10 @@ int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz) return ret; } -int gettimeofday(struct timeval *, struct timezone *) +int gettimeofday(struct __kernel_old_timeval *, struct timezone *) __attribute__((weak, alias("__vdso_gettimeofday"))); -time_t __vdso_time(time_t *t) +__kernel_old_time_t __vdso_time(__kernel_old_time_t *t) { long secs; @@ -47,7 +47,7 @@ time_t __vdso_time(time_t *t) return secs; } -time_t time(time_t *t) __attribute__((weak, alias("__vdso_time"))); +__kernel_old_time_t time(__kernel_old_time_t *t) __attribute__((weak, alias("__vdso_time"))); long __vdso_getcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *unused) diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index a8e7beb6b7b5..4a3fa295d8fe 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -3,8 +3,10 @@ config XTENSA def_bool y select ARCH_32BIT_OFF_T select ARCH_HAS_BINFMT_FLAT if !MMU - select ARCH_HAS_SYNC_DMA_FOR_CPU - select ARCH_HAS_SYNC_DMA_FOR_DEVICE + select ARCH_HAS_DMA_PREP_COHERENT if MMU + select ARCH_HAS_SYNC_DMA_FOR_CPU if MMU + select ARCH_HAS_SYNC_DMA_FOR_DEVICE if MMU + select ARCH_HAS_UNCACHED_SEGMENT if MMU select ARCH_USE_QUEUED_RWLOCKS select ARCH_USE_QUEUED_SPINLOCKS select ARCH_WANT_FRAME_POINTERS @@ -19,8 +21,8 @@ config XTENSA select GENERIC_PCI_IOMAP select GENERIC_SCHED_CLOCK select GENERIC_STRNCPY_FROM_USER if KASAN - select HAVE_ARCH_JUMP_LABEL - select HAVE_ARCH_KASAN if MMU + select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL + select HAVE_ARCH_KASAN if MMU && !XIP_KERNEL select HAVE_ARCH_TRACEHOOK select HAVE_DEBUG_KMEMLEAK select HAVE_DMA_CONTIGUOUS @@ -213,151 +215,6 @@ config HOTPLUG_CPU Say N if you want to disable CPU hotplug. -config INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX - bool "Initialize Xtensa MMU inside the Linux kernel code" - depends on !XTENSA_VARIANT_FSF && !XTENSA_VARIANT_DC232B - default y if XTENSA_VARIANT_DC233C || XTENSA_VARIANT_CUSTOM - help - Earlier version initialized the MMU in the exception vector - before jumping to _startup in head.S and had an advantage that - it was possible to place a software breakpoint at 'reset' and - then enter your normal kernel breakpoints once the MMU was mapped - to the kernel mappings (0XC0000000). - - This unfortunately won't work for U-Boot and likely also wont - work for using KEXEC to have a hot kernel ready for doing a - KDUMP. - - So now the MMU is initialized in head.S but it's necessary to - use hardware breakpoints (gdb 'hbreak' cmd) to break at _startup. - xt-gdb can't place a Software Breakpoint in the 0XD region prior - to mapping the MMU and after mapping even if the area of low memory - was mapped gdb wouldn't remove the breakpoint on hitting it as the - PC wouldn't match. Since Hardware Breakpoints are recommended for - Linux configurations it seems reasonable to just assume they exist - and leave this older mechanism for unfortunate souls that choose - not to follow Tensilica's recommendation. - - Selecting this will cause U-Boot to set the KERNEL Load and Entry - address at 0x00003000 instead of the mapped std of 0xD0003000. - - If in doubt, say Y. - -config MEMMAP_CACHEATTR - hex "Cache attributes for the memory address space" - depends on !MMU - default 0x22222222 - help - These cache attributes are set up for noMMU systems. Each hex digit - specifies cache attributes for the corresponding 512MB memory - region: bits 0..3 -- for addresses 0x00000000..0x1fffffff, - bits 4..7 -- for addresses 0x20000000..0x3fffffff, and so on. - - Cache attribute values are specific for the MMU type. - For region protection MMUs: - 1: WT cached, - 2: cache bypass, - 4: WB cached, - f: illegal. - For ful MMU: - bit 0: executable, - bit 1: writable, - bits 2..3: - 0: cache bypass, - 1: WB cache, - 2: WT cache, - 3: special (c and e are illegal, f is reserved). - For MPU: - 0: illegal, - 1: WB cache, - 2: WB, no-write-allocate cache, - 3: WT cache, - 4: cache bypass. - -config KSEG_PADDR - hex "Physical address of the KSEG mapping" - depends on INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX && MMU - default 0x00000000 - help - This is the physical address where KSEG is mapped. Please refer to - the chosen KSEG layout help for the required address alignment. - Unpacked kernel image (including vectors) must be located completely - within KSEG. - Physical memory below this address is not available to linux. - - If unsure, leave the default value here. - -config KERNEL_LOAD_ADDRESS - hex "Kernel load address" - default 0x60003000 if !MMU - default 0x00003000 if MMU && INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX - default 0xd0003000 if MMU && !INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX - help - This is the address where the kernel is loaded. - It is virtual address for MMUv2 configurations and physical address - for all other configurations. - - If unsure, leave the default value here. - -config VECTORS_OFFSET - hex "Kernel vectors offset" - default 0x00003000 - help - This is the offset of the kernel image from the relocatable vectors - base. - - If unsure, leave the default value here. - -choice - prompt "KSEG layout" - depends on MMU - default XTENSA_KSEG_MMU_V2 - -config XTENSA_KSEG_MMU_V2 - bool "MMUv2: 128MB cached + 128MB uncached" - help - MMUv2 compatible kernel memory map: TLB way 5 maps 128MB starting - at KSEG_PADDR to 0xd0000000 with cache and to 0xd8000000 - without cache. - KSEG_PADDR must be aligned to 128MB. - -config XTENSA_KSEG_256M - bool "256MB cached + 256MB uncached" - depends on INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX - help - TLB way 6 maps 256MB starting at KSEG_PADDR to 0xb0000000 - with cache and to 0xc0000000 without cache. - KSEG_PADDR must be aligned to 256MB. - -config XTENSA_KSEG_512M - bool "512MB cached + 512MB uncached" - depends on INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX - help - TLB way 6 maps 512MB starting at KSEG_PADDR to 0xa0000000 - with cache and to 0xc0000000 without cache. - KSEG_PADDR must be aligned to 256MB. - -endchoice - -config HIGHMEM - bool "High Memory Support" - depends on MMU - help - Linux can use the full amount of RAM in the system by - default. However, the default MMUv2 setup only maps the - lowermost 128 MB of memory linearly to the areas starting - at 0xd0000000 (cached) and 0xd8000000 (uncached). - When there are more than 128 MB memory in the system not - all of it can be "permanently mapped" by the kernel. - The physical memory that's not permanently mapped is called - "high memory". - - If you are compiling a kernel which will never run on a - machine with more than 128 MB total physical RAM, answer - N here. - - If unsure, say Y. - config FAST_SYSCALL_XTENSA bool "Enable fast atomic syscalls" default n @@ -444,6 +301,9 @@ config XTENSA_CALIBRATE_CCOUNT config SERIAL_CONSOLE def_bool n +config PLATFORM_HAVE_XIP + def_bool n + menu "Platform options" choice @@ -470,6 +330,7 @@ config XTENSA_PLATFORM_XTFPGA select PLATFORM_WANT_DEFAULT_MEM if !MMU select SERIAL_CONSOLE select XTENSA_CALIBRATE_CCOUNT + select PLATFORM_HAVE_XIP help XTFPGA is the name of Tensilica board family (LX60, LX110, LX200, ML605). This hardware is capable of running a full Linux distribution. @@ -561,34 +422,6 @@ config SIMDISK1_FILENAME Another simulated disk in a host file for a buildroot-independent storage. -config FORCE_MAX_ZONEORDER - int "Maximum zone order" - default "11" - help - The kernel memory allocator divides physically contiguous memory - blocks into "zones", where each zone is a power of two number of - pages. This option selects the largest power of two that the kernel - keeps in the memory allocator. If you need to allocate very large - blocks of physically contiguous memory, then you may need to - increase this value. - - This config option is actually maximum order plus one. For example, - a value of 11 means that the largest free memory block is 2^10 pages. - -config PLATFORM_WANT_DEFAULT_MEM - def_bool n - -config DEFAULT_MEM_START - hex - prompt "PAGE_OFFSET/PHYS_OFFSET" if !MMU && PLATFORM_WANT_DEFAULT_MEM - default 0x60000000 if PLATFORM_WANT_DEFAULT_MEM - default 0x00000000 - help - This is the base address used for both PAGE_OFFSET and PHYS_OFFSET - in noMMU configurations. - - If unsure, leave the default value here. - config XTFPGA_LCD bool "Enable XTFPGA LCD driver" depends on XTENSA_PLATFORM_XTFPGA @@ -619,6 +452,221 @@ config XTFPGA_LCD_8BIT_ACCESS only be used with 8-bit interface. Please consult prototyping user guide for your board for the correct interface width. +comment "Kernel memory layout" + +config INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX + bool "Initialize Xtensa MMU inside the Linux kernel code" + depends on !XTENSA_VARIANT_FSF && !XTENSA_VARIANT_DC232B + default y if XTENSA_VARIANT_DC233C || XTENSA_VARIANT_CUSTOM + help + Earlier version initialized the MMU in the exception vector + before jumping to _startup in head.S and had an advantage that + it was possible to place a software breakpoint at 'reset' and + then enter your normal kernel breakpoints once the MMU was mapped + to the kernel mappings (0XC0000000). + + This unfortunately won't work for U-Boot and likely also wont + work for using KEXEC to have a hot kernel ready for doing a + KDUMP. + + So now the MMU is initialized in head.S but it's necessary to + use hardware breakpoints (gdb 'hbreak' cmd) to break at _startup. + xt-gdb can't place a Software Breakpoint in the 0XD region prior + to mapping the MMU and after mapping even if the area of low memory + was mapped gdb wouldn't remove the breakpoint on hitting it as the + PC wouldn't match. Since Hardware Breakpoints are recommended for + Linux configurations it seems reasonable to just assume they exist + and leave this older mechanism for unfortunate souls that choose + not to follow Tensilica's recommendation. + + Selecting this will cause U-Boot to set the KERNEL Load and Entry + address at 0x00003000 instead of the mapped std of 0xD0003000. + + If in doubt, say Y. + +config XIP_KERNEL + bool "Kernel Execute-In-Place from ROM" + depends on PLATFORM_HAVE_XIP + help + Execute-In-Place allows the kernel to run from non-volatile storage + directly addressable by the CPU, such as NOR flash. This saves RAM + space since the text section of the kernel is not loaded from flash + to RAM. Read-write sections, such as the data section and stack, + are still copied to RAM. The XIP kernel is not compressed since + it has to run directly from flash, so it will take more space to + store it. The flash address used to link the kernel object files, + and for storing it, is configuration dependent. Therefore, if you + say Y here, you must know the proper physical address where to + store the kernel image depending on your own flash memory usage. + + Also note that the make target becomes "make xipImage" rather than + "make Image" or "make uImage". The final kernel binary to put in + ROM memory will be arch/xtensa/boot/xipImage. + + If unsure, say N. + +config MEMMAP_CACHEATTR + hex "Cache attributes for the memory address space" + depends on !MMU + default 0x22222222 + help + These cache attributes are set up for noMMU systems. Each hex digit + specifies cache attributes for the corresponding 512MB memory + region: bits 0..3 -- for addresses 0x00000000..0x1fffffff, + bits 4..7 -- for addresses 0x20000000..0x3fffffff, and so on. + + Cache attribute values are specific for the MMU type. + For region protection MMUs: + 1: WT cached, + 2: cache bypass, + 4: WB cached, + f: illegal. + For ful MMU: + bit 0: executable, + bit 1: writable, + bits 2..3: + 0: cache bypass, + 1: WB cache, + 2: WT cache, + 3: special (c and e are illegal, f is reserved). + For MPU: + 0: illegal, + 1: WB cache, + 2: WB, no-write-allocate cache, + 3: WT cache, + 4: cache bypass. + +config KSEG_PADDR + hex "Physical address of the KSEG mapping" + depends on INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX && MMU + default 0x00000000 + help + This is the physical address where KSEG is mapped. Please refer to + the chosen KSEG layout help for the required address alignment. + Unpacked kernel image (including vectors) must be located completely + within KSEG. + Physical memory below this address is not available to linux. + + If unsure, leave the default value here. + +config KERNEL_VIRTUAL_ADDRESS + hex "Kernel virtual address" + depends on MMU && XIP_KERNEL + default 0xd0003000 + help + This is the virtual address where the XIP kernel is mapped. + XIP kernel may be mapped into KSEG or KIO region, virtual address + provided here must match kernel load address provided in + KERNEL_LOAD_ADDRESS. + +config KERNEL_LOAD_ADDRESS + hex "Kernel load address" + default 0x60003000 if !MMU + default 0x00003000 if MMU && INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX + default 0xd0003000 if MMU && !INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX + help + This is the address where the kernel is loaded. + It is virtual address for MMUv2 configurations and physical address + for all other configurations. + + If unsure, leave the default value here. + +config VECTORS_OFFSET + hex "Kernel vectors offset" + default 0x00003000 + depends on !XIP_KERNEL + help + This is the offset of the kernel image from the relocatable vectors + base. + + If unsure, leave the default value here. + +config XIP_DATA_ADDR + hex "XIP kernel data virtual address" + depends on XIP_KERNEL + default 0x00000000 + help + This is the virtual address where XIP kernel data is copied. + It must be within KSEG if MMU is used. + +config PLATFORM_WANT_DEFAULT_MEM + def_bool n + +config DEFAULT_MEM_START + hex + prompt "PAGE_OFFSET/PHYS_OFFSET" if !MMU && PLATFORM_WANT_DEFAULT_MEM + default 0x60000000 if PLATFORM_WANT_DEFAULT_MEM + default 0x00000000 + help + This is the base address used for both PAGE_OFFSET and PHYS_OFFSET + in noMMU configurations. + + If unsure, leave the default value here. + +choice + prompt "KSEG layout" + depends on MMU + default XTENSA_KSEG_MMU_V2 + +config XTENSA_KSEG_MMU_V2 + bool "MMUv2: 128MB cached + 128MB uncached" + help + MMUv2 compatible kernel memory map: TLB way 5 maps 128MB starting + at KSEG_PADDR to 0xd0000000 with cache and to 0xd8000000 + without cache. + KSEG_PADDR must be aligned to 128MB. + +config XTENSA_KSEG_256M + bool "256MB cached + 256MB uncached" + depends on INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX + help + TLB way 6 maps 256MB starting at KSEG_PADDR to 0xb0000000 + with cache and to 0xc0000000 without cache. + KSEG_PADDR must be aligned to 256MB. + +config XTENSA_KSEG_512M + bool "512MB cached + 512MB uncached" + depends on INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX + help + TLB way 6 maps 512MB starting at KSEG_PADDR to 0xa0000000 + with cache and to 0xc0000000 without cache. + KSEG_PADDR must be aligned to 256MB. + +endchoice + +config HIGHMEM + bool "High Memory Support" + depends on MMU + help + Linux can use the full amount of RAM in the system by + default. However, the default MMUv2 setup only maps the + lowermost 128 MB of memory linearly to the areas starting + at 0xd0000000 (cached) and 0xd8000000 (uncached). + When there are more than 128 MB memory in the system not + all of it can be "permanently mapped" by the kernel. + The physical memory that's not permanently mapped is called + "high memory". + + If you are compiling a kernel which will never run on a + machine with more than 128 MB total physical RAM, answer + N here. + + If unsure, say Y. + +config FORCE_MAX_ZONEORDER + int "Maximum zone order" + default "11" + help + The kernel memory allocator divides physically contiguous memory + blocks into "zones", where each zone is a power of two number of + pages. This option selects the largest power of two that the kernel + keeps in the memory allocator. If you need to allocate very large + blocks of physically contiguous memory, then you may need to + increase this value. + + This config option is actually maximum order plus one. For example, + a value of 11 means that the largest free memory block is 2^10 pages. + endmenu menu "Power management options" diff --git a/arch/xtensa/Kconfig.debug b/arch/xtensa/Kconfig.debug index 39de98e20018..83cc8d12fa0e 100644 --- a/arch/xtensa/Kconfig.debug +++ b/arch/xtensa/Kconfig.debug @@ -31,3 +31,10 @@ config S32C1I_SELFTEST It is easy to make wrong hardware configuration, this test should catch it early. Say 'N' on stable hardware. + +config PRINT_STACK_DEPTH + int "Stack depth to print" if DEBUG_KERNEL + default 64 + help + This option allows you to set the stack depth that the kernel + prints in stack traces. diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile index 1542018c9e57..67a7d151d1e7 100644 --- a/arch/xtensa/Makefile +++ b/arch/xtensa/Makefile @@ -87,7 +87,7 @@ drivers-$(CONFIG_OPROFILE) += arch/xtensa/oprofile/ boot := arch/xtensa/boot -all Image zImage uImage: vmlinux +all Image zImage uImage xipImage: vmlinux $(Q)$(MAKE) $(build)=$(boot) $@ archheaders: @@ -97,4 +97,5 @@ define archhelp @echo '* Image - Kernel ELF image with reset vector' @echo '* zImage - Compressed kernel image (arch/xtensa/boot/images/zImage.*)' @echo '* uImage - U-Boot wrapped image' + @echo ' xipImage - XIP image' endef diff --git a/arch/xtensa/boot/Makefile b/arch/xtensa/boot/Makefile index 294846117fc2..efb91bfda2b4 100644 --- a/arch/xtensa/boot/Makefile +++ b/arch/xtensa/boot/Makefile @@ -29,6 +29,7 @@ all: $(boot-y) Image: boot-elf zImage: boot-redboot uImage: $(obj)/uImage +xipImage: $(obj)/xipImage boot-elf boot-redboot: $(addprefix $(obj)/,$(subdir-y)) $(Q)$(MAKE) $(build)=$(obj)/$@ $(MAKECMDGOALS) @@ -50,3 +51,7 @@ UIMAGE_COMPRESSION = gzip $(obj)/uImage: vmlinux.bin.gz FORCE $(call if_changed,uimage) $(Q)$(kecho) ' Kernel: $@ is ready' + +$(obj)/xipImage: vmlinux FORCE + $(call if_changed,objcopy) + $(Q)$(kecho) ' Kernel: $@ is ready' diff --git a/arch/xtensa/configs/audio_kc705_defconfig b/arch/xtensa/configs/audio_kc705_defconfig index f378e56f9ce6..b6367af71d65 100644 --- a/arch/xtensa/configs/audio_kc705_defconfig +++ b/arch/xtensa/configs/audio_kc705_defconfig @@ -16,7 +16,6 @@ CONFIG_SCHED_AUTOGROUP=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y -CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS_ALL=y CONFIG_PROFILING=y CONFIG_OPROFILE=y diff --git a/arch/xtensa/configs/cadence_csp_defconfig b/arch/xtensa/configs/cadence_csp_defconfig index 62f32a902568..f4eef6decd2a 100644 --- a/arch/xtensa/configs/cadence_csp_defconfig +++ b/arch/xtensa/configs/cadence_csp_defconfig @@ -21,7 +21,6 @@ CONFIG_INITRAMFS_SOURCE="$$KERNEL_INITRAMFS_SOURCE" # CONFIG_RD_LZO is not set # CONFIG_RD_LZ4 is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL_SYSCALL=y CONFIG_EMBEDDED=y CONFIG_PROFILING=y CONFIG_MODULES=y diff --git a/arch/xtensa/configs/generic_kc705_defconfig b/arch/xtensa/configs/generic_kc705_defconfig index 8bebe07f1060..c925165cf760 100644 --- a/arch/xtensa/configs/generic_kc705_defconfig +++ b/arch/xtensa/configs/generic_kc705_defconfig @@ -16,7 +16,6 @@ CONFIG_SCHED_AUTOGROUP=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y -CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS_ALL=y CONFIG_PROFILING=y CONFIG_OPROFILE=y diff --git a/arch/xtensa/configs/iss_defconfig b/arch/xtensa/configs/iss_defconfig index 4bb5b76d9524..d1c01742baf4 100644 --- a/arch/xtensa/configs/iss_defconfig +++ b/arch/xtensa/configs/iss_defconfig @@ -1,7 +1,6 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_EXPERT=y -CONFIG_SYSCTL_SYSCALL=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set # CONFIG_PCI is not set diff --git a/arch/xtensa/configs/nommu_kc705_defconfig b/arch/xtensa/configs/nommu_kc705_defconfig index 933ab2adf434..380e366730d5 100644 --- a/arch/xtensa/configs/nommu_kc705_defconfig +++ b/arch/xtensa/configs/nommu_kc705_defconfig @@ -21,7 +21,6 @@ CONFIG_BLK_DEV_INITRD=y # CONFIG_RD_LZO is not set # CONFIG_RD_LZ4 is not set CONFIG_EXPERT=y -CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS_ALL=y CONFIG_PERF_EVENTS=y CONFIG_MODULES=y diff --git a/arch/xtensa/configs/smp_lx200_defconfig b/arch/xtensa/configs/smp_lx200_defconfig index e29c5b179a5b..d46b58f34098 100644 --- a/arch/xtensa/configs/smp_lx200_defconfig +++ b/arch/xtensa/configs/smp_lx200_defconfig @@ -16,7 +16,6 @@ CONFIG_SCHED_AUTOGROUP=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y -CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS_ALL=y CONFIG_PROFILING=y CONFIG_OPROFILE=y diff --git a/arch/xtensa/configs/virt_defconfig b/arch/xtensa/configs/virt_defconfig index bfc45a138e72..4fddd8512350 100644 --- a/arch/xtensa/configs/virt_defconfig +++ b/arch/xtensa/configs/virt_defconfig @@ -15,7 +15,6 @@ CONFIG_SCHED_AUTOGROUP=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y -CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS_ALL=y CONFIG_PERF_EVENTS=y CONFIG_XTENSA_VARIANT_DC233C=y diff --git a/arch/xtensa/configs/xip_kc705_defconfig b/arch/xtensa/configs/xip_kc705_defconfig new file mode 100644 index 000000000000..f9e85c082afc --- /dev/null +++ b/arch/xtensa/configs/xip_kc705_defconfig @@ -0,0 +1,119 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y +CONFIG_IRQ_TIME_ACCOUNTING=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_MEMCG=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_CGROUP_DEBUG=y +CONFIG_NAMESPACES=y +CONFIG_SCHED_AUTOGROUP=y +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_EXPERT=y +CONFIG_KALLSYMS_ALL=y +CONFIG_PROFILING=y +CONFIG_XTENSA_VARIANT_DC233C=y +CONFIG_XTENSA_UNALIGNED_USER=y +CONFIG_XIP_KERNEL=y +CONFIG_XIP_DATA_ADDR=0xd0000000 +CONFIG_KERNEL_VIRTUAL_ADDRESS=0xe6000000 +CONFIG_KERNEL_LOAD_ADDRESS=0xf6000000 +CONFIG_XTENSA_KSEG_512M=y +CONFIG_HIGHMEM=y +CONFIG_XTENSA_PLATFORM_XTFPGA=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="earlycon=uart8250,mmio32native,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=0x38000000@0" +CONFIG_USE_OF=y +CONFIG_BUILTIN_DTB_SOURCE="kc705" +# CONFIG_PARSE_BOOTPARAM is not set +CONFIG_OPROFILE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_COMPACTION is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_WIRELESS is not set +CONFIG_UEVENT_HELPER=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_ARC is not set +# CONFIG_NET_VENDOR_AURORA is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SAMSUNG is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set +CONFIG_MARVELL_PHY=y +# CONFIG_WLAN is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +CONFIG_DEVKMEM=y +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_SOFT_WATCHDOG=y +# CONFIG_VGA_CONSOLE is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT3_FS=y +CONFIG_FANOTIFY=y +CONFIG_VFAT_FS=y +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_NFS_FS=y +CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y +CONFIG_ROOT_NFS=y +CONFIG_SUNRPC_DEBUG=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_CRYPTO_ECHAINIV=y +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_LZO=y +CONFIG_CRYPTO_ANSI_CPRNG=y +CONFIG_PRINTK_TIME=y +CONFIG_DYNAMIC_DEBUG=y +CONFIG_DEBUG_INFO=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_SCHED_DEBUG is not set +CONFIG_SCHEDSTATS=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_ATOMIC_SLEEP=y +CONFIG_STACKTRACE=y +CONFIG_RCU_TRACE=y +# CONFIG_FTRACE is not set +# CONFIG_S32C1I_SELFTEST is not set diff --git a/arch/xtensa/include/asm/Kbuild b/arch/xtensa/include/asm/Kbuild index ffa0cf7f66c3..3acc31e55e02 100644 --- a/arch/xtensa/include/asm/Kbuild +++ b/arch/xtensa/include/asm/Kbuild @@ -11,6 +11,7 @@ generic-y += exec.h generic-y += extable.h generic-y += fb.h generic-y += hardirq.h +generic-y += hw_irq.h generic-y += irq_regs.h generic-y += irq_work.h generic-y += kdebug.h @@ -30,6 +31,7 @@ generic-y += qspinlock.h generic-y += sections.h generic-y += topology.h generic-y += trace_clock.h +generic-y += user.h generic-y += vga.h generic-y += word-at-a-time.h generic-y += xor.h diff --git a/arch/xtensa/include/asm/atomic.h b/arch/xtensa/include/asm/atomic.h index 7b00d26f472e..3e7c6134ed32 100644 --- a/arch/xtensa/include/asm/atomic.h +++ b/arch/xtensa/include/asm/atomic.h @@ -64,13 +64,13 @@ static inline void atomic_##op(int i, atomic_t *v) \ int result; \ \ __asm__ __volatile__( \ - "1: l32ex %1, %3\n" \ - " " #op " %0, %1, %2\n" \ - " s32ex %0, %3\n" \ - " getex %0\n" \ - " beqz %0, 1b\n" \ - : "=&a" (result), "=&a" (tmp) \ - : "a" (i), "a" (v) \ + "1: l32ex %[tmp], %[addr]\n" \ + " " #op " %[result], %[tmp], %[i]\n" \ + " s32ex %[result], %[addr]\n" \ + " getex %[result]\n" \ + " beqz %[result], 1b\n" \ + : [result] "=&a" (result), [tmp] "=&a" (tmp) \ + : [i] "a" (i), [addr] "a" (v) \ : "memory" \ ); \ } \ @@ -82,14 +82,14 @@ static inline int atomic_##op##_return(int i, atomic_t *v) \ int result; \ \ __asm__ __volatile__( \ - "1: l32ex %1, %3\n" \ - " " #op " %0, %1, %2\n" \ - " s32ex %0, %3\n" \ - " getex %0\n" \ - " beqz %0, 1b\n" \ - " " #op " %0, %1, %2\n" \ - : "=&a" (result), "=&a" (tmp) \ - : "a" (i), "a" (v) \ + "1: l32ex %[tmp], %[addr]\n" \ + " " #op " %[result], %[tmp], %[i]\n" \ + " s32ex %[result], %[addr]\n" \ + " getex %[result]\n" \ + " beqz %[result], 1b\n" \ + " " #op " %[result], %[tmp], %[i]\n" \ + : [result] "=&a" (result), [tmp] "=&a" (tmp) \ + : [i] "a" (i), [addr] "a" (v) \ : "memory" \ ); \ \ @@ -103,13 +103,13 @@ static inline int atomic_fetch_##op(int i, atomic_t *v) \ int result; \ \ __asm__ __volatile__( \ - "1: l32ex %1, %3\n" \ - " " #op " %0, %1, %2\n" \ - " s32ex %0, %3\n" \ - " getex %0\n" \ - " beqz %0, 1b\n" \ - : "=&a" (result), "=&a" (tmp) \ - : "a" (i), "a" (v) \ + "1: l32ex %[tmp], %[addr]\n" \ + " " #op " %[result], %[tmp], %[i]\n" \ + " s32ex %[result], %[addr]\n" \ + " getex %[result]\n" \ + " beqz %[result], 1b\n" \ + : [result] "=&a" (result), [tmp] "=&a" (tmp) \ + : [i] "a" (i), [addr] "a" (v) \ : "memory" \ ); \ \ @@ -124,13 +124,14 @@ static inline void atomic_##op(int i, atomic_t * v) \ int result; \ \ __asm__ __volatile__( \ - "1: l32i %1, %3, 0\n" \ - " wsr %1, scompare1\n" \ - " " #op " %0, %1, %2\n" \ - " s32c1i %0, %3, 0\n" \ - " bne %0, %1, 1b\n" \ - : "=&a" (result), "=&a" (tmp) \ - : "a" (i), "a" (v) \ + "1: l32i %[tmp], %[mem]\n" \ + " wsr %[tmp], scompare1\n" \ + " " #op " %[result], %[tmp], %[i]\n" \ + " s32c1i %[result], %[mem]\n" \ + " bne %[result], %[tmp], 1b\n" \ + : [result] "=&a" (result), [tmp] "=&a" (tmp), \ + [mem] "+m" (*v) \ + : [i] "a" (i) \ : "memory" \ ); \ } \ @@ -142,14 +143,15 @@ static inline int atomic_##op##_return(int i, atomic_t * v) \ int result; \ \ __asm__ __volatile__( \ - "1: l32i %1, %3, 0\n" \ - " wsr %1, scompare1\n" \ - " " #op " %0, %1, %2\n" \ - " s32c1i %0, %3, 0\n" \ - " bne %0, %1, 1b\n" \ - " " #op " %0, %0, %2\n" \ - : "=&a" (result), "=&a" (tmp) \ - : "a" (i), "a" (v) \ + "1: l32i %[tmp], %[mem]\n" \ + " wsr %[tmp], scompare1\n" \ + " " #op " %[result], %[tmp], %[i]\n" \ + " s32c1i %[result], %[mem]\n" \ + " bne %[result], %[tmp], 1b\n" \ + " " #op " %[result], %[result], %[i]\n" \ + : [result] "=&a" (result), [tmp] "=&a" (tmp), \ + [mem] "+m" (*v) \ + : [i] "a" (i) \ : "memory" \ ); \ \ @@ -163,13 +165,14 @@ static inline int atomic_fetch_##op(int i, atomic_t * v) \ int result; \ \ __asm__ __volatile__( \ - "1: l32i %1, %3, 0\n" \ - " wsr %1, scompare1\n" \ - " " #op " %0, %1, %2\n" \ - " s32c1i %0, %3, 0\n" \ - " bne %0, %1, 1b\n" \ - : "=&a" (result), "=&a" (tmp) \ - : "a" (i), "a" (v) \ + "1: l32i %[tmp], %[mem]\n" \ + " wsr %[tmp], scompare1\n" \ + " " #op " %[result], %[tmp], %[i]\n" \ + " s32c1i %[result], %[mem]\n" \ + " bne %[result], %[tmp], 1b\n" \ + : [result] "=&a" (result), [tmp] "=&a" (tmp), \ + [mem] "+m" (*v) \ + : [i] "a" (i) \ : "memory" \ ); \ \ @@ -184,14 +187,14 @@ static inline void atomic_##op(int i, atomic_t * v) \ unsigned int vval; \ \ __asm__ __volatile__( \ - " rsil a15, "__stringify(TOPLEVEL)"\n"\ - " l32i %0, %2, 0\n" \ - " " #op " %0, %0, %1\n" \ - " s32i %0, %2, 0\n" \ + " rsil a15, "__stringify(TOPLEVEL)"\n" \ + " l32i %[result], %[mem]\n" \ + " " #op " %[result], %[result], %[i]\n" \ + " s32i %[result], %[mem]\n" \ " wsr a15, ps\n" \ " rsync\n" \ - : "=&a" (vval) \ - : "a" (i), "a" (v) \ + : [result] "=&a" (vval), [mem] "+m" (*v) \ + : [i] "a" (i) \ : "a15", "memory" \ ); \ } \ @@ -203,13 +206,13 @@ static inline int atomic_##op##_return(int i, atomic_t * v) \ \ __asm__ __volatile__( \ " rsil a15,"__stringify(TOPLEVEL)"\n" \ - " l32i %0, %2, 0\n" \ - " " #op " %0, %0, %1\n" \ - " s32i %0, %2, 0\n" \ + " l32i %[result], %[mem]\n" \ + " " #op " %[result], %[result], %[i]\n" \ + " s32i %[result], %[mem]\n" \ " wsr a15, ps\n" \ " rsync\n" \ - : "=&a" (vval) \ - : "a" (i), "a" (v) \ + : [result] "=&a" (vval), [mem] "+m" (*v) \ + : [i] "a" (i) \ : "a15", "memory" \ ); \ \ @@ -223,13 +226,14 @@ static inline int atomic_fetch_##op(int i, atomic_t * v) \ \ __asm__ __volatile__( \ " rsil a15,"__stringify(TOPLEVEL)"\n" \ - " l32i %0, %3, 0\n" \ - " " #op " %1, %0, %2\n" \ - " s32i %1, %3, 0\n" \ + " l32i %[result], %[mem]\n" \ + " " #op " %[tmp], %[result], %[i]\n" \ + " s32i %[tmp], %[mem]\n" \ " wsr a15, ps\n" \ " rsync\n" \ - : "=&a" (vval), "=&a" (tmp) \ - : "a" (i), "a" (v) \ + : [result] "=&a" (vval), [tmp] "=&a" (tmp), \ + [mem] "+m" (*v) \ + : [i] "a" (i) \ : "a15", "memory" \ ); \ \ diff --git a/arch/xtensa/include/asm/bitops.h b/arch/xtensa/include/asm/bitops.h index be8b2be5a98b..3f71d364ba90 100644 --- a/arch/xtensa/include/asm/bitops.h +++ b/arch/xtensa/include/asm/bitops.h @@ -98,247 +98,112 @@ static inline unsigned long __fls(unsigned long word) #if XCHAL_HAVE_EXCLUSIVE -static inline void set_bit(unsigned int bit, volatile unsigned long *p) -{ - unsigned long tmp; - unsigned long mask = 1UL << (bit & 31); - - p += bit >> 5; - - __asm__ __volatile__( - "1: l32ex %0, %2\n" - " or %0, %0, %1\n" - " s32ex %0, %2\n" - " getex %0\n" - " beqz %0, 1b\n" - : "=&a" (tmp) - : "a" (mask), "a" (p) - : "memory"); -} - -static inline void clear_bit(unsigned int bit, volatile unsigned long *p) -{ - unsigned long tmp; - unsigned long mask = 1UL << (bit & 31); - - p += bit >> 5; - - __asm__ __volatile__( - "1: l32ex %0, %2\n" - " and %0, %0, %1\n" - " s32ex %0, %2\n" - " getex %0\n" - " beqz %0, 1b\n" - : "=&a" (tmp) - : "a" (~mask), "a" (p) - : "memory"); -} - -static inline void change_bit(unsigned int bit, volatile unsigned long *p) -{ - unsigned long tmp; - unsigned long mask = 1UL << (bit & 31); - - p += bit >> 5; - - __asm__ __volatile__( - "1: l32ex %0, %2\n" - " xor %0, %0, %1\n" - " s32ex %0, %2\n" - " getex %0\n" - " beqz %0, 1b\n" - : "=&a" (tmp) - : "a" (mask), "a" (p) - : "memory"); -} - -static inline int -test_and_set_bit(unsigned int bit, volatile unsigned long *p) -{ - unsigned long tmp, value; - unsigned long mask = 1UL << (bit & 31); - - p += bit >> 5; - - __asm__ __volatile__( - "1: l32ex %1, %3\n" - " or %0, %1, %2\n" - " s32ex %0, %3\n" - " getex %0\n" - " beqz %0, 1b\n" - : "=&a" (tmp), "=&a" (value) - : "a" (mask), "a" (p) - : "memory"); - - return value & mask; -} - -static inline int -test_and_clear_bit(unsigned int bit, volatile unsigned long *p) -{ - unsigned long tmp, value; - unsigned long mask = 1UL << (bit & 31); - - p += bit >> 5; - - __asm__ __volatile__( - "1: l32ex %1, %3\n" - " and %0, %1, %2\n" - " s32ex %0, %3\n" - " getex %0\n" - " beqz %0, 1b\n" - : "=&a" (tmp), "=&a" (value) - : "a" (~mask), "a" (p) - : "memory"); - - return value & mask; -} - -static inline int -test_and_change_bit(unsigned int bit, volatile unsigned long *p) -{ - unsigned long tmp, value; - unsigned long mask = 1UL << (bit & 31); - - p += bit >> 5; - - __asm__ __volatile__( - "1: l32ex %1, %3\n" - " xor %0, %1, %2\n" - " s32ex %0, %3\n" - " getex %0\n" - " beqz %0, 1b\n" - : "=&a" (tmp), "=&a" (value) - : "a" (mask), "a" (p) - : "memory"); - - return value & mask; +#define BIT_OP(op, insn, inv) \ +static inline void op##_bit(unsigned int bit, volatile unsigned long *p)\ +{ \ + unsigned long tmp; \ + unsigned long mask = 1UL << (bit & 31); \ + \ + p += bit >> 5; \ + \ + __asm__ __volatile__( \ + "1: l32ex %[tmp], %[addr]\n" \ + " "insn" %[tmp], %[tmp], %[mask]\n" \ + " s32ex %[tmp], %[addr]\n" \ + " getex %[tmp]\n" \ + " beqz %[tmp], 1b\n" \ + : [tmp] "=&a" (tmp) \ + : [mask] "a" (inv mask), [addr] "a" (p) \ + : "memory"); \ +} + +#define TEST_AND_BIT_OP(op, insn, inv) \ +static inline int \ +test_and_##op##_bit(unsigned int bit, volatile unsigned long *p) \ +{ \ + unsigned long tmp, value; \ + unsigned long mask = 1UL << (bit & 31); \ + \ + p += bit >> 5; \ + \ + __asm__ __volatile__( \ + "1: l32ex %[value], %[addr]\n" \ + " "insn" %[tmp], %[value], %[mask]\n" \ + " s32ex %[tmp], %[addr]\n" \ + " getex %[tmp]\n" \ + " beqz %[tmp], 1b\n" \ + : [tmp] "=&a" (tmp), [value] "=&a" (value) \ + : [mask] "a" (inv mask), [addr] "a" (p) \ + : "memory"); \ + \ + return value & mask; \ } #elif XCHAL_HAVE_S32C1I -static inline void set_bit(unsigned int bit, volatile unsigned long *p) -{ - unsigned long tmp, value; - unsigned long mask = 1UL << (bit & 31); - - p += bit >> 5; - - __asm__ __volatile__( - "1: l32i %1, %3, 0\n" - " wsr %1, scompare1\n" - " or %0, %1, %2\n" - " s32c1i %0, %3, 0\n" - " bne %0, %1, 1b\n" - : "=&a" (tmp), "=&a" (value) - : "a" (mask), "a" (p) - : "memory"); -} - -static inline void clear_bit(unsigned int bit, volatile unsigned long *p) -{ - unsigned long tmp, value; - unsigned long mask = 1UL << (bit & 31); - - p += bit >> 5; - - __asm__ __volatile__( - "1: l32i %1, %3, 0\n" - " wsr %1, scompare1\n" - " and %0, %1, %2\n" - " s32c1i %0, %3, 0\n" - " bne %0, %1, 1b\n" - : "=&a" (tmp), "=&a" (value) - : "a" (~mask), "a" (p) - : "memory"); +#define BIT_OP(op, insn, inv) \ +static inline void op##_bit(unsigned int bit, volatile unsigned long *p)\ +{ \ + unsigned long tmp, value; \ + unsigned long mask = 1UL << (bit & 31); \ + \ + p += bit >> 5; \ + \ + __asm__ __volatile__( \ + "1: l32i %[value], %[mem]\n" \ + " wsr %[value], scompare1\n" \ + " "insn" %[tmp], %[value], %[mask]\n" \ + " s32c1i %[tmp], %[mem]\n" \ + " bne %[tmp], %[value], 1b\n" \ + : [tmp] "=&a" (tmp), [value] "=&a" (value), \ + [mem] "+m" (*p) \ + : [mask] "a" (inv mask) \ + : "memory"); \ +} + +#define TEST_AND_BIT_OP(op, insn, inv) \ +static inline int \ +test_and_##op##_bit(unsigned int bit, volatile unsigned long *p) \ +{ \ + unsigned long tmp, value; \ + unsigned long mask = 1UL << (bit & 31); \ + \ + p += bit >> 5; \ + \ + __asm__ __volatile__( \ + "1: l32i %[value], %[mem]\n" \ + " wsr %[value], scompare1\n" \ + " "insn" %[tmp], %[value], %[mask]\n" \ + " s32c1i %[tmp], %[mem]\n" \ + " bne %[tmp], %[value], 1b\n" \ + : [tmp] "=&a" (tmp), [value] "=&a" (value), \ + [mem] "+m" (*p) \ + : [mask] "a" (inv mask) \ + : "memory"); \ + \ + return tmp & mask; \ } -static inline void change_bit(unsigned int bit, volatile unsigned long *p) -{ - unsigned long tmp, value; - unsigned long mask = 1UL << (bit & 31); - - p += bit >> 5; - - __asm__ __volatile__( - "1: l32i %1, %3, 0\n" - " wsr %1, scompare1\n" - " xor %0, %1, %2\n" - " s32c1i %0, %3, 0\n" - " bne %0, %1, 1b\n" - : "=&a" (tmp), "=&a" (value) - : "a" (mask), "a" (p) - : "memory"); -} +#else -static inline int -test_and_set_bit(unsigned int bit, volatile unsigned long *p) -{ - unsigned long tmp, value; - unsigned long mask = 1UL << (bit & 31); - - p += bit >> 5; - - __asm__ __volatile__( - "1: l32i %1, %3, 0\n" - " wsr %1, scompare1\n" - " or %0, %1, %2\n" - " s32c1i %0, %3, 0\n" - " bne %0, %1, 1b\n" - : "=&a" (tmp), "=&a" (value) - : "a" (mask), "a" (p) - : "memory"); - - return tmp & mask; -} +#define BIT_OP(op, insn, inv) +#define TEST_AND_BIT_OP(op, insn, inv) -static inline int -test_and_clear_bit(unsigned int bit, volatile unsigned long *p) -{ - unsigned long tmp, value; - unsigned long mask = 1UL << (bit & 31); - - p += bit >> 5; - - __asm__ __volatile__( - "1: l32i %1, %3, 0\n" - " wsr %1, scompare1\n" - " and %0, %1, %2\n" - " s32c1i %0, %3, 0\n" - " bne %0, %1, 1b\n" - : "=&a" (tmp), "=&a" (value) - : "a" (~mask), "a" (p) - : "memory"); - - return tmp & mask; -} +#include <asm-generic/bitops/atomic.h> -static inline int -test_and_change_bit(unsigned int bit, volatile unsigned long *p) -{ - unsigned long tmp, value; - unsigned long mask = 1UL << (bit & 31); - - p += bit >> 5; - - __asm__ __volatile__( - "1: l32i %1, %3, 0\n" - " wsr %1, scompare1\n" - " xor %0, %1, %2\n" - " s32c1i %0, %3, 0\n" - " bne %0, %1, 1b\n" - : "=&a" (tmp), "=&a" (value) - : "a" (mask), "a" (p) - : "memory"); - - return tmp & mask; -} +#endif /* XCHAL_HAVE_S32C1I */ -#else +#define BIT_OPS(op, insn, inv) \ + BIT_OP(op, insn, inv) \ + TEST_AND_BIT_OP(op, insn, inv) -#include <asm-generic/bitops/atomic.h> +BIT_OPS(set, "or", ) +BIT_OPS(clear, "and", ~) +BIT_OPS(change, "xor", ) -#endif /* XCHAL_HAVE_S32C1I */ +#undef BIT_OPS +#undef BIT_OP +#undef TEST_AND_BIT_OP #include <asm-generic/bitops/find.h> #include <asm-generic/bitops/le.h> diff --git a/arch/xtensa/include/asm/cache.h b/arch/xtensa/include/asm/cache.h index b21fd133ff62..54e147ac26bf 100644 --- a/arch/xtensa/include/asm/cache.h +++ b/arch/xtensa/include/asm/cache.h @@ -31,4 +31,10 @@ #define ARCH_DMA_MINALIGN L1_CACHE_BYTES +/* + * R/O after init is actually writable, it cannot go to .rodata + * according to vmlinux linker script. + */ +#define __ro_after_init __read_mostly + #endif /* _XTENSA_CACHE_H */ diff --git a/arch/xtensa/include/asm/cmpxchg.h b/arch/xtensa/include/asm/cmpxchg.h index 7ccc5cbf441b..a175f8aec3fb 100644 --- a/arch/xtensa/include/asm/cmpxchg.h +++ b/arch/xtensa/include/asm/cmpxchg.h @@ -27,25 +27,25 @@ __cmpxchg_u32(volatile int *p, int old, int new) unsigned long tmp, result; __asm__ __volatile__( - "1: l32ex %0, %3\n" - " bne %0, %4, 2f\n" - " mov %1, %2\n" - " s32ex %1, %3\n" - " getex %1\n" - " beqz %1, 1b\n" + "1: l32ex %[result], %[addr]\n" + " bne %[result], %[cmp], 2f\n" + " mov %[tmp], %[new]\n" + " s32ex %[tmp], %[addr]\n" + " getex %[tmp]\n" + " beqz %[tmp], 1b\n" "2:\n" - : "=&a" (result), "=&a" (tmp) - : "a" (new), "a" (p), "a" (old) + : [result] "=&a" (result), [tmp] "=&a" (tmp) + : [new] "a" (new), [addr] "a" (p), [cmp] "a" (old) : "memory" ); return result; #elif XCHAL_HAVE_S32C1I __asm__ __volatile__( - " wsr %2, scompare1\n" - " s32c1i %0, %1, 0\n" - : "+a" (new) - : "a" (p), "a" (old) + " wsr %[cmp], scompare1\n" + " s32c1i %[new], %[mem]\n" + : [new] "+a" (new), [mem] "+m" (*p) + : [cmp] "a" (old) : "memory" ); @@ -53,14 +53,14 @@ __cmpxchg_u32(volatile int *p, int old, int new) #else __asm__ __volatile__( " rsil a15, "__stringify(TOPLEVEL)"\n" - " l32i %0, %1, 0\n" - " bne %0, %2, 1f\n" - " s32i %3, %1, 0\n" + " l32i %[old], %[mem]\n" + " bne %[old], %[cmp], 1f\n" + " s32i %[new], %[mem]\n" "1:\n" " wsr a15, ps\n" " rsync\n" - : "=&a" (old) - : "a" (p), "a" (old), "r" (new) + : [old] "=&a" (old), [mem] "+m" (*p) + : [cmp] "a" (old), [new] "r" (new) : "a15", "memory"); return old; #endif @@ -129,13 +129,13 @@ static inline unsigned long xchg_u32(volatile int * m, unsigned long val) unsigned long tmp, result; __asm__ __volatile__( - "1: l32ex %0, %3\n" - " mov %1, %2\n" - " s32ex %1, %3\n" - " getex %1\n" - " beqz %1, 1b\n" - : "=&a" (result), "=&a" (tmp) - : "a" (val), "a" (m) + "1: l32ex %[result], %[addr]\n" + " mov %[tmp], %[val]\n" + " s32ex %[tmp], %[addr]\n" + " getex %[tmp]\n" + " beqz %[tmp], 1b\n" + : [result] "=&a" (result), [tmp] "=&a" (tmp) + : [val] "a" (val), [addr] "a" (m) : "memory" ); @@ -143,13 +143,14 @@ static inline unsigned long xchg_u32(volatile int * m, unsigned long val) #elif XCHAL_HAVE_S32C1I unsigned long tmp, result; __asm__ __volatile__( - "1: l32i %1, %2, 0\n" - " mov %0, %3\n" - " wsr %1, scompare1\n" - " s32c1i %0, %2, 0\n" - " bne %0, %1, 1b\n" - : "=&a" (result), "=&a" (tmp) - : "a" (m), "a" (val) + "1: l32i %[tmp], %[mem]\n" + " mov %[result], %[val]\n" + " wsr %[tmp], scompare1\n" + " s32c1i %[result], %[mem]\n" + " bne %[result], %[tmp], 1b\n" + : [result] "=&a" (result), [tmp] "=&a" (tmp), + [mem] "+m" (*m) + : [val] "a" (val) : "memory" ); return result; @@ -157,12 +158,12 @@ static inline unsigned long xchg_u32(volatile int * m, unsigned long val) unsigned long tmp; __asm__ __volatile__( " rsil a15, "__stringify(TOPLEVEL)"\n" - " l32i %0, %1, 0\n" - " s32i %2, %1, 0\n" + " l32i %[tmp], %[mem]\n" + " s32i %[val], %[mem]\n" " wsr a15, ps\n" " rsync\n" - : "=&a" (tmp) - : "a" (m), "a" (val) + : [tmp] "=&a" (tmp), [mem] "+m" (*m) + : [val] "a" (val) : "a15", "memory"); return tmp; #endif diff --git a/arch/xtensa/include/asm/fixmap.h b/arch/xtensa/include/asm/fixmap.h index 7e25c1b50ac0..cfb8696917e9 100644 --- a/arch/xtensa/include/asm/fixmap.h +++ b/arch/xtensa/include/asm/fixmap.h @@ -78,8 +78,10 @@ static inline unsigned long virt_to_fix(const unsigned long vaddr) #define kmap_get_fixmap_pte(vaddr) \ pte_offset_kernel( \ - pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), \ - (vaddr) \ - ) + pmd_offset(pud_offset(p4d_offset(pgd_offset_k(vaddr), \ + (vaddr)), \ + (vaddr)), \ + (vaddr)), \ + (vaddr)) #endif diff --git a/arch/xtensa/include/asm/futex.h b/arch/xtensa/include/asm/futex.h index 0c4457ca0a85..964611083224 100644 --- a/arch/xtensa/include/asm/futex.h +++ b/arch/xtensa/include/asm/futex.h @@ -43,10 +43,10 @@ #elif XCHAL_HAVE_S32C1I #define __futex_atomic_op(insn, ret, old, uaddr, arg) \ __asm__ __volatile( \ - "1: l32i %[oldval], %[addr], 0\n" \ + "1: l32i %[oldval], %[mem]\n" \ insn "\n" \ " wsr %[oldval], scompare1\n" \ - "2: s32c1i %[newval], %[addr], 0\n" \ + "2: s32c1i %[newval], %[mem]\n" \ " bne %[newval], %[oldval], 1b\n" \ " movi %[newval], 0\n" \ "3:\n" \ @@ -60,9 +60,9 @@ " .section __ex_table,\"a\"\n" \ " .long 1b, 5b, 2b, 5b\n" \ " .previous\n" \ - : [oldval] "=&r" (old), [newval] "=&r" (ret) \ - : [addr] "r" (uaddr), [oparg] "r" (arg), \ - [fault] "I" (-EFAULT) \ + : [oldval] "=&r" (old), [newval] "=&r" (ret), \ + [mem] "+m" (*(uaddr)) \ + : [oparg] "r" (arg), [fault] "I" (-EFAULT) \ : "memory") #endif diff --git a/arch/xtensa/include/asm/hw_irq.h b/arch/xtensa/include/asm/hw_irq.h deleted file mode 100644 index 3ddbea759b2b..000000000000 --- a/arch/xtensa/include/asm/hw_irq.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * include/asm-xtensa/hw_irq.h - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - * - * Copyright (C) 2002 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_HW_IRQ_H -#define _XTENSA_HW_IRQ_H - -#endif diff --git a/arch/xtensa/include/asm/initialize_mmu.h b/arch/xtensa/include/asm/initialize_mmu.h index 3b054d2bede0..e3e1d9a1ef69 100644 --- a/arch/xtensa/include/asm/initialize_mmu.h +++ b/arch/xtensa/include/asm/initialize_mmu.h @@ -23,6 +23,7 @@ #ifndef _XTENSA_INITIALIZE_MMU_H #define _XTENSA_INITIALIZE_MMU_H +#include <linux/init.h> #include <asm/pgtable.h> #include <asm/vectors.h> @@ -183,7 +184,7 @@ #endif #if XCHAL_HAVE_MPU - .data + __REFCONST .align 4 .Lattribute_table: .long 0x000000, 0x1fff00, 0x1ddf00, 0x1eef00 diff --git a/arch/xtensa/include/asm/io.h b/arch/xtensa/include/asm/io.h index 988e08530a5c..54188e69b988 100644 --- a/arch/xtensa/include/asm/io.h +++ b/arch/xtensa/include/asm/io.h @@ -32,8 +32,7 @@ void xtensa_iounmap(volatile void __iomem *addr); /* * Return the virtual address for the specified bus memory. */ -static inline void __iomem *ioremap_nocache(unsigned long offset, - unsigned long size) +static inline void __iomem *ioremap(unsigned long offset, unsigned long size) { if (offset >= XCHAL_KIO_PADDR && offset - XCHAL_KIO_PADDR < XCHAL_KIO_SIZE) @@ -52,15 +51,6 @@ static inline void __iomem *ioremap_cache(unsigned long offset, return xtensa_ioremap_cache(offset, size); } #define ioremap_cache ioremap_cache -#define ioremap_nocache ioremap_nocache - -#define ioremap_wc ioremap_nocache -#define ioremap_wt ioremap_nocache - -static inline void __iomem *ioremap(unsigned long offset, unsigned long size) -{ - return ioremap_nocache(offset, size); -} static inline void iounmap(volatile void __iomem *addr) { diff --git a/arch/xtensa/include/asm/kmem_layout.h b/arch/xtensa/include/asm/kmem_layout.h index 9c12babc016c..7cbf68ca7106 100644 --- a/arch/xtensa/include/asm/kmem_layout.h +++ b/arch/xtensa/include/asm/kmem_layout.h @@ -11,6 +11,7 @@ #ifndef _XTENSA_KMEM_LAYOUT_H #define _XTENSA_KMEM_LAYOUT_H +#include <asm/core.h> #include <asm/types.h> #ifdef CONFIG_MMU @@ -65,6 +66,34 @@ #endif +/* KIO definition */ + +#if XCHAL_HAVE_PTP_MMU +#define XCHAL_KIO_CACHED_VADDR 0xe0000000 +#define XCHAL_KIO_BYPASS_VADDR 0xf0000000 +#define XCHAL_KIO_DEFAULT_PADDR 0xf0000000 +#else +#define XCHAL_KIO_BYPASS_VADDR XCHAL_KIO_PADDR +#define XCHAL_KIO_DEFAULT_PADDR 0x90000000 +#endif +#define XCHAL_KIO_SIZE 0x10000000 + +#if (!XCHAL_HAVE_PTP_MMU || XCHAL_HAVE_SPANNING_WAY) && defined(CONFIG_OF) +#define XCHAL_KIO_PADDR xtensa_get_kio_paddr() +#ifndef __ASSEMBLY__ +extern unsigned long xtensa_kio_paddr; + +static inline unsigned long xtensa_get_kio_paddr(void) +{ + return xtensa_kio_paddr; +} +#endif +#else +#define XCHAL_KIO_PADDR XCHAL_KIO_DEFAULT_PADDR +#endif + +/* KERNEL_STACK definition */ + #ifndef CONFIG_KASAN #define KERNEL_STACK_SHIFT 13 #else diff --git a/arch/xtensa/include/asm/page.h b/arch/xtensa/include/asm/page.h index 09c56cba442e..f4771c29c7e9 100644 --- a/arch/xtensa/include/asm/page.h +++ b/arch/xtensa/include/asm/page.h @@ -169,7 +169,18 @@ static inline unsigned long ___pa(unsigned long va) if (off >= XCHAL_KSEG_SIZE) off -= XCHAL_KSEG_SIZE; +#ifndef CONFIG_XIP_KERNEL return off + PHYS_OFFSET; +#else + if (off < XCHAL_KSEG_SIZE) + return off + PHYS_OFFSET; + + off -= XCHAL_KSEG_SIZE; + if (off >= XCHAL_KIO_SIZE) + off -= XCHAL_KIO_SIZE; + + return off + XCHAL_KIO_PADDR; +#endif } #define __pa(x) ___pa((unsigned long)(x)) #else diff --git a/arch/xtensa/include/asm/pgtable.h b/arch/xtensa/include/asm/pgtable.h index 3f7fe5a8c286..27ac17c9da09 100644 --- a/arch/xtensa/include/asm/pgtable.h +++ b/arch/xtensa/include/asm/pgtable.h @@ -8,7 +8,6 @@ #ifndef _XTENSA_PGTABLE_H #define _XTENSA_PGTABLE_H -#define __ARCH_USE_5LEVEL_HACK #include <asm/page.h> #include <asm/kmem_layout.h> #include <asm-generic/pgtable-nopmd.h> @@ -371,9 +370,6 @@ ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep) #define pgd_index(address) ((address) >> PGDIR_SHIFT) -/* Find an entry in the second-level page table.. */ -#define pmd_offset(dir,address) ((pmd_t*)(dir)) - /* Find an entry in the third-level page table.. */ #define pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) #define pte_offset_kernel(dir,addr) \ diff --git a/arch/xtensa/include/asm/platform.h b/arch/xtensa/include/asm/platform.h index 913826dfa838..f2c48522c5a1 100644 --- a/arch/xtensa/include/asm/platform.h +++ b/arch/xtensa/include/asm/platform.h @@ -65,31 +65,4 @@ extern void platform_calibrate_ccount (void); */ void cpu_reset(void) __attribute__((noreturn)); -/* - * Memory caching is platform-dependent in noMMU xtensa configurations. - * The following set of functions should be implemented in platform code - * in order to enable coherent DMA memory operations when CONFIG_MMU is not - * enabled. Default implementations do nothing and issue a warning. - */ - -/* - * Check whether p points to a cached memory. - */ -bool platform_vaddr_cached(const void *p); - -/* - * Check whether p points to an uncached memory. - */ -bool platform_vaddr_uncached(const void *p); - -/* - * Return pointer to an uncached view of the cached sddress p. - */ -void *platform_vaddr_to_uncached(void *p); - -/* - * Return pointer to a cached view of the uncached sddress p. - */ -void *platform_vaddr_to_cached(void *p); - #endif /* _XTENSA_PLATFORM_H */ diff --git a/arch/xtensa/include/asm/processor.h b/arch/xtensa/include/asm/processor.h index 7495520d7a3e..6fa903daf2a2 100644 --- a/arch/xtensa/include/asm/processor.h +++ b/arch/xtensa/include/asm/processor.h @@ -195,6 +195,7 @@ struct thread_struct { /* Clearing a0 terminates the backtrace. */ #define start_thread(regs, new_pc, new_sp) \ do { \ + unsigned long syscall = (regs)->syscall; \ memset((regs), 0, sizeof(*(regs))); \ (regs)->pc = (new_pc); \ (regs)->ps = USER_PS_VALUE; \ @@ -204,7 +205,7 @@ struct thread_struct { (regs)->depc = 0; \ (regs)->windowbase = 0; \ (regs)->windowstart = 1; \ - (regs)->syscall = NO_SYSCALL; \ + (regs)->syscall = syscall; \ } while (0) /* Forward declaration */ diff --git a/arch/xtensa/include/asm/syscall.h b/arch/xtensa/include/asm/syscall.h index 359ab40e935a..f9a671cbf933 100644 --- a/arch/xtensa/include/asm/syscall.h +++ b/arch/xtensa/include/asm/syscall.h @@ -51,7 +51,7 @@ static inline void syscall_set_return_value(struct task_struct *task, struct pt_regs *regs, int error, long val) { - regs->areg[0] = (long) error ? error : val; + regs->areg[2] = (long) error ? error : val; } #define SYSCALL_MAX_ARGS 6 @@ -79,7 +79,7 @@ static inline void syscall_set_arguments(struct task_struct *task, regs->areg[reg[i]] = args[i]; } -asmlinkage long xtensa_rt_sigreturn(struct pt_regs*); +asmlinkage long xtensa_rt_sigreturn(void); asmlinkage long xtensa_shmat(int, char __user *, int); asmlinkage long xtensa_fadvise64_64(int, int, unsigned long long, unsigned long long); diff --git a/arch/xtensa/include/asm/uaccess.h b/arch/xtensa/include/asm/uaccess.h index 3f80386f1883..47b7702aaa40 100644 --- a/arch/xtensa/include/asm/uaccess.h +++ b/arch/xtensa/include/asm/uaccess.h @@ -132,13 +132,13 @@ do { \ #define __check_align_1 "" #define __check_align_2 \ - " _bbci.l %[addr], 0, 1f \n" \ + " _bbci.l %[mem] * 0, 1f \n" \ " movi %[err], %[efault] \n" \ " _j 2f \n" #define __check_align_4 \ - " _bbsi.l %[addr], 0, 0f \n" \ - " _bbci.l %[addr], 1, 1f \n" \ + " _bbsi.l %[mem] * 0, 0f \n" \ + " _bbci.l %[mem] * 0 + 1, 1f \n" \ "0: movi %[err], %[efault] \n" \ " _j 2f \n" @@ -154,7 +154,7 @@ do { \ #define __put_user_asm(x_, addr_, err_, align, insn, cb)\ __asm__ __volatile__( \ __check_align_##align \ - "1: "insn" %[x], %[addr], 0 \n" \ + "1: "insn" %[x], %[mem] \n" \ "2: \n" \ " .section .fixup,\"ax\" \n" \ " .align 4 \n" \ @@ -167,8 +167,8 @@ __asm__ __volatile__( \ " .section __ex_table,\"a\" \n" \ " .long 1b, 5b \n" \ " .previous" \ - :[err] "+r"(err_), [tmp] "=r"(cb) \ - :[x] "r"(x_), [addr] "r"(addr_), [efault] "i"(-EFAULT)) + :[err] "+r"(err_), [tmp] "=r"(cb), [mem] "=m"(*(addr_)) \ + :[x] "r"(x_), [efault] "i"(-EFAULT)) #define __get_user_nocheck(x, ptr, size) \ ({ \ @@ -222,7 +222,7 @@ do { \ u32 __x = 0; \ __asm__ __volatile__( \ __check_align_##align \ - "1: "insn" %[x], %[addr], 0 \n" \ + "1: "insn" %[x], %[mem] \n" \ "2: \n" \ " .section .fixup,\"ax\" \n" \ " .align 4 \n" \ @@ -236,7 +236,7 @@ do { \ " .long 1b, 5b \n" \ " .previous" \ :[err] "+r"(err_), [tmp] "=r"(cb), [x] "+r"(__x) \ - :[addr] "r"(addr_), [efault] "i"(-EFAULT)); \ + :[mem] "m"(*(addr_)), [efault] "i"(-EFAULT)); \ (x_) = (__force __typeof__(*(addr_)))__x; \ } while (0) diff --git a/arch/xtensa/include/asm/user.h b/arch/xtensa/include/asm/user.h deleted file mode 100644 index 2c3ed23354a8..000000000000 --- a/arch/xtensa/include/asm/user.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * include/asm-xtensa/user.h - * - * Xtensa Processor version. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_USER_H -#define _XTENSA_USER_H - -/* This file usually defines a 'struct user' structure. However, it it only - * used for a.out file, which are not supported on Xtensa. - */ - -#endif /* _XTENSA_USER_H */ diff --git a/arch/xtensa/include/asm/vectors.h b/arch/xtensa/include/asm/vectors.h index 79fe3007919e..fd99b25037a7 100644 --- a/arch/xtensa/include/asm/vectors.h +++ b/arch/xtensa/include/asm/vectors.h @@ -21,50 +21,18 @@ #include <asm/core.h> #include <asm/kmem_layout.h> -#if XCHAL_HAVE_PTP_MMU -#define XCHAL_KIO_CACHED_VADDR 0xe0000000 -#define XCHAL_KIO_BYPASS_VADDR 0xf0000000 -#define XCHAL_KIO_DEFAULT_PADDR 0xf0000000 +#if defined(CONFIG_MMU) && XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY +#ifdef CONFIG_KERNEL_VIRTUAL_ADDRESS +#define KERNELOFFSET CONFIG_KERNEL_VIRTUAL_ADDRESS #else -#define XCHAL_KIO_BYPASS_VADDR XCHAL_KIO_PADDR -#define XCHAL_KIO_DEFAULT_PADDR 0x90000000 -#endif -#define XCHAL_KIO_SIZE 0x10000000 - -#if (!XCHAL_HAVE_PTP_MMU || XCHAL_HAVE_SPANNING_WAY) && defined(CONFIG_OF) -#define XCHAL_KIO_PADDR xtensa_get_kio_paddr() -#ifndef __ASSEMBLY__ -extern unsigned long xtensa_kio_paddr; - -static inline unsigned long xtensa_get_kio_paddr(void) -{ - return xtensa_kio_paddr; -} -#endif -#else -#define XCHAL_KIO_PADDR XCHAL_KIO_DEFAULT_PADDR -#endif - -#if defined(CONFIG_MMU) - -#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY -/* Image Virtual Start Address */ -#define KERNELOFFSET (XCHAL_KSEG_CACHED_VADDR + \ - CONFIG_KERNEL_LOAD_ADDRESS - \ +#define KERNELOFFSET (CONFIG_KERNEL_LOAD_ADDRESS + \ + XCHAL_KSEG_CACHED_VADDR - \ XCHAL_KSEG_PADDR) +#endif #else #define KERNELOFFSET CONFIG_KERNEL_LOAD_ADDRESS #endif -#else /* !defined(CONFIG_MMU) */ - /* MMU Not being used - Virtual == Physical */ - -/* Location of the start of the kernel text, _start */ -#define KERNELOFFSET CONFIG_KERNEL_LOAD_ADDRESS - - -#endif /* CONFIG_MMU */ - #define RESET_VECTOR1_VADDR (XCHAL_RESET_VECTOR1_VADDR) #ifdef CONFIG_VECTORS_OFFSET #define VECBASE_VADDR (KERNELOFFSET - CONFIG_VECTORS_OFFSET) diff --git a/arch/xtensa/include/uapi/asm/ipcbuf.h b/arch/xtensa/include/uapi/asm/ipcbuf.h index a57afa0b606f..3bd0642f6660 100644 --- a/arch/xtensa/include/uapi/asm/ipcbuf.h +++ b/arch/xtensa/include/uapi/asm/ipcbuf.h @@ -12,6 +12,8 @@ #ifndef _XTENSA_IPCBUF_H #define _XTENSA_IPCBUF_H +#include <linux/posix_types.h> + /* * Pad space is left for: * - 32-bit mode_t and seq diff --git a/arch/xtensa/include/uapi/asm/msgbuf.h b/arch/xtensa/include/uapi/asm/msgbuf.h index d6915e9f071c..1ed2c85b693a 100644 --- a/arch/xtensa/include/uapi/asm/msgbuf.h +++ b/arch/xtensa/include/uapi/asm/msgbuf.h @@ -17,6 +17,8 @@ #ifndef _XTENSA_MSGBUF_H #define _XTENSA_MSGBUF_H +#include <asm/ipcbuf.h> + struct msqid64_ds { struct ipc64_perm msg_perm; #ifdef __XTENSA_EB__ diff --git a/arch/xtensa/include/uapi/asm/sembuf.h b/arch/xtensa/include/uapi/asm/sembuf.h index 09f348d643f1..3b9cdd406dfe 100644 --- a/arch/xtensa/include/uapi/asm/sembuf.h +++ b/arch/xtensa/include/uapi/asm/sembuf.h @@ -22,6 +22,7 @@ #define _XTENSA_SEMBUF_H #include <asm/byteorder.h> +#include <asm/ipcbuf.h> struct semid64_ds { struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ diff --git a/arch/xtensa/kernel/Makefile b/arch/xtensa/kernel/Makefile index 6f629027ac7d..d4082c6a121b 100644 --- a/arch/xtensa/kernel/Makefile +++ b/arch/xtensa/kernel/Makefile @@ -5,10 +5,11 @@ extra-y := head.o vmlinux.lds -obj-y := align.o coprocessor.o entry.o irq.o pci-dma.o platform.o process.o \ +obj-y := align.o coprocessor.o entry.o irq.o platform.o process.o \ ptrace.o setup.o signal.o stacktrace.o syscall.o time.o traps.o \ vectors.o +obj-$(CONFIG_MMU) += pci-dma.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_MODULES) += xtensa_ksyms.o module.o obj-$(CONFIG_FUNCTION_TRACER) += mcount.o diff --git a/arch/xtensa/kernel/coprocessor.S b/arch/xtensa/kernel/coprocessor.S index 80828b95a51f..bb8e499b9900 100644 --- a/arch/xtensa/kernel/coprocessor.S +++ b/arch/xtensa/kernel/coprocessor.S @@ -15,17 +15,9 @@ #include <linux/linkage.h> #include <asm/asm-offsets.h> #include <asm/asmmacro.h> -#include <asm/processor.h> #include <asm/coprocessor.h> -#include <asm/thread_info.h> -#include <asm/asm-uaccess.h> -#include <asm/unistd.h> -#include <asm/ptrace.h> #include <asm/current.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/signal.h> -#include <asm/tlbflush.h> +#include <asm/regs.h> #if XTENSA_HAVE_COPROCESSORS diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S index 9e3676879168..be897803834a 100644 --- a/arch/xtensa/kernel/entry.S +++ b/arch/xtensa/kernel/entry.S @@ -529,7 +529,7 @@ common_exception_return: l32i a4, a2, TI_PRE_COUNT bnez a4, 4f call4 preempt_schedule_irq - j 1b + j 4f #endif #if XTENSA_FAKE_NMI @@ -1876,8 +1876,7 @@ ENDPROC(fast_store_prohibited) ENTRY(system_call) - /* reserve 4 bytes on stack for function parameter */ - abi_entry(4) + abi_entry_default /* regs->syscall = regs->areg[2] */ @@ -1892,11 +1891,10 @@ ENTRY(system_call) mov a6, a2 call4 do_syscall_trace_enter + beqz a6, .Lsyscall_exit l32i a7, a2, PT_SYSCALL 1: - s32i a7, a1, 4 - /* syscall = sys_call_table[syscall_nr] */ movi a4, sys_call_table @@ -1906,8 +1904,6 @@ ENTRY(system_call) addx4 a4, a7, a4 l32i a4, a4, 0 - movi a5, sys_ni_syscall; - beq a4, a5, 1f /* Load args: arg0 - arg5 are passed via regs. */ @@ -1918,25 +1914,19 @@ ENTRY(system_call) l32i a10, a2, PT_AREG8 l32i a11, a2, PT_AREG9 - /* Pass one additional argument to the syscall: pt_regs (on stack) */ - s32i a2, a1, 0 - callx4 a4 1: /* regs->areg[2] = return_value */ s32i a6, a2, PT_AREG2 bnez a3, 1f - abi_ret(4) +.Lsyscall_exit: + abi_ret_default 1: - l32i a4, a1, 4 - l32i a3, a2, PT_SYSCALL - s32i a4, a2, PT_SYSCALL mov a6, a2 call4 do_syscall_trace_leave - s32i a3, a2, PT_SYSCALL - abi_ret(4) + abi_ret_default ENDPROC(system_call) diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S index 4ae998b5a348..e0c1fac0910f 100644 --- a/arch/xtensa/kernel/head.S +++ b/arch/xtensa/kernel/head.S @@ -260,6 +260,13 @@ ENTRY(_startup) ___invalidate_icache_all a2 a3 isync +#ifdef CONFIG_XIP_KERNEL + /* Setup bootstrap CPU stack in XIP kernel */ + + movi a1, start_info + l32i a1, a1, 0 +#endif + movi a6, 0 xsr a6, excsave1 @@ -355,10 +362,10 @@ ENDPROC(cpu_restart) * DATA section */ - .section ".data.init.refok" - .align 4 + __REFDATA + .align 4 ENTRY(start_info) - .long init_thread_union + KERNEL_STACK_SIZE + .long init_thread_union + KERNEL_STACK_SIZE /* * BSS section diff --git a/arch/xtensa/kernel/pci-dma.c b/arch/xtensa/kernel/pci-dma.c index 154979d62b73..72b6222daa0b 100644 --- a/arch/xtensa/kernel/pci-dma.c +++ b/arch/xtensa/kernel/pci-dma.c @@ -44,8 +44,8 @@ static void do_cache_op(phys_addr_t paddr, size_t size, } } -void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { switch (dir) { case DMA_BIDIRECTIONAL: @@ -62,8 +62,8 @@ void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr, } } -void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_device(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { switch (dir) { case DMA_BIDIRECTIONAL: @@ -81,122 +81,25 @@ void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr, } } -#ifdef CONFIG_MMU -bool platform_vaddr_cached(const void *p) -{ - unsigned long addr = (unsigned long)p; - - return addr >= XCHAL_KSEG_CACHED_VADDR && - addr - XCHAL_KSEG_CACHED_VADDR < XCHAL_KSEG_SIZE; -} - -bool platform_vaddr_uncached(const void *p) -{ - unsigned long addr = (unsigned long)p; - - return addr >= XCHAL_KSEG_BYPASS_VADDR && - addr - XCHAL_KSEG_BYPASS_VADDR < XCHAL_KSEG_SIZE; -} - -void *platform_vaddr_to_uncached(void *p) -{ - return p + XCHAL_KSEG_BYPASS_VADDR - XCHAL_KSEG_CACHED_VADDR; -} - -void *platform_vaddr_to_cached(void *p) -{ - return p + XCHAL_KSEG_CACHED_VADDR - XCHAL_KSEG_BYPASS_VADDR; -} -#else -bool __attribute__((weak)) platform_vaddr_cached(const void *p) -{ - WARN_ONCE(1, "Default %s implementation is used\n", __func__); - return true; -} - -bool __attribute__((weak)) platform_vaddr_uncached(const void *p) -{ - WARN_ONCE(1, "Default %s implementation is used\n", __func__); - return false; -} - -void __attribute__((weak)) *platform_vaddr_to_uncached(void *p) +void arch_dma_prep_coherent(struct page *page, size_t size) { - WARN_ONCE(1, "Default %s implementation is used\n", __func__); - return p; -} - -void __attribute__((weak)) *platform_vaddr_to_cached(void *p) -{ - WARN_ONCE(1, "Default %s implementation is used\n", __func__); - return p; + __invalidate_dcache_range((unsigned long)page_address(page), size); } -#endif /* - * Note: We assume that the full memory space is always mapped to 'kseg' - * Otherwise we have to use page attributes (not implemented). + * Memory caching is platform-dependent in noMMU xtensa configurations. + * The following two functions should be implemented in platform code + * in order to enable coherent DMA memory operations when CONFIG_MMU is not + * enabled. */ - -void *arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, - gfp_t flag, unsigned long attrs) -{ - unsigned long count = PAGE_ALIGN(size) >> PAGE_SHIFT; - struct page *page = NULL; - - /* ignore region speicifiers */ - - flag &= ~(__GFP_DMA | __GFP_HIGHMEM); - - if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff)) - flag |= GFP_DMA; - - if (gfpflags_allow_blocking(flag)) - page = dma_alloc_from_contiguous(dev, count, get_order(size), - flag & __GFP_NOWARN); - - if (!page) - page = alloc_pages(flag | __GFP_ZERO, get_order(size)); - - if (!page) - return NULL; - - *handle = phys_to_dma(dev, page_to_phys(page)); - #ifdef CONFIG_MMU - if (PageHighMem(page)) { - void *p; - - p = dma_common_contiguous_remap(page, size, - pgprot_noncached(PAGE_KERNEL), - __builtin_return_address(0)); - if (!p) { - if (!dma_release_from_contiguous(dev, page, count)) - __free_pages(page, get_order(size)); - } - return p; - } -#endif - BUG_ON(!platform_vaddr_cached(page_address(page))); - __invalidate_dcache_range((unsigned long)page_address(page), size); - return platform_vaddr_to_uncached(page_address(page)); +void *uncached_kernel_address(void *p) +{ + return p + XCHAL_KSEG_BYPASS_VADDR - XCHAL_KSEG_CACHED_VADDR; } -void arch_dma_free(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle, unsigned long attrs) +void *cached_kernel_address(void *p) { - unsigned long count = PAGE_ALIGN(size) >> PAGE_SHIFT; - struct page *page; - - if (platform_vaddr_uncached(vaddr)) { - page = virt_to_page(platform_vaddr_to_cached(vaddr)); - } else { -#ifdef CONFIG_MMU - dma_common_free_remap(vaddr, size); -#endif - page = pfn_to_page(PHYS_PFN(dma_to_phys(dev, dma_handle))); - } - - if (!dma_release_from_contiguous(dev, page, count)) - __free_pages(page, get_order(size)); + return p + XCHAL_KSEG_CACHED_VADDR - XCHAL_KSEG_BYPASS_VADDR; } +#endif /* CONFIG_MMU */ diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c index db278a9e80c7..9e1c49134c07 100644 --- a/arch/xtensa/kernel/process.c +++ b/arch/xtensa/kernel/process.c @@ -264,6 +264,8 @@ int copy_thread(unsigned long clone_flags, unsigned long usp_thread_fn, ®s->areg[XCHAL_NUM_AREGS - len/4], len); } + childregs->syscall = regs->syscall; + /* The thread pointer is passed in the '4th argument' (= a5) */ if (clone_flags & CLONE_SETTLS) childregs->threadptr = childregs->areg[5]; diff --git a/arch/xtensa/kernel/ptrace.c b/arch/xtensa/kernel/ptrace.c index b964f0b2d886..145742d70a9f 100644 --- a/arch/xtensa/kernel/ptrace.c +++ b/arch/xtensa/kernel/ptrace.c @@ -542,14 +542,28 @@ long arch_ptrace(struct task_struct *child, long request, return ret; } -void do_syscall_trace_enter(struct pt_regs *regs) +void do_syscall_trace_leave(struct pt_regs *regs); +int do_syscall_trace_enter(struct pt_regs *regs) { + if (regs->syscall == NO_SYSCALL) + regs->areg[2] = -ENOSYS; + if (test_thread_flag(TIF_SYSCALL_TRACE) && - tracehook_report_syscall_entry(regs)) + tracehook_report_syscall_entry(regs)) { + regs->areg[2] = -ENOSYS; regs->syscall = NO_SYSCALL; + return 0; + } + + if (regs->syscall == NO_SYSCALL) { + do_syscall_trace_leave(regs); + return 0; + } if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) trace_sys_enter(regs, syscall_get_nr(current, regs)); + + return 1; } void do_syscall_trace_leave(struct pt_regs *regs) diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c index e0e1e1892b86..0f93b67c7a5a 100644 --- a/arch/xtensa/kernel/setup.c +++ b/arch/xtensa/kernel/setup.c @@ -308,6 +308,10 @@ extern char _Level6InterruptVector_text_end; extern char _SecondaryResetVector_text_start; extern char _SecondaryResetVector_text_end; #endif +#ifdef CONFIG_XIP_KERNEL +extern char _xip_start[]; +extern char _xip_end[]; +#endif static inline int __init_memblock mem_reserve(unsigned long start, unsigned long end) @@ -339,6 +343,9 @@ void __init setup_arch(char **cmdline_p) #endif mem_reserve(__pa(_stext), __pa(_end)); +#ifdef CONFIG_XIP_KERNEL + mem_reserve(__pa(_xip_start), __pa(_xip_end)); +#endif #ifdef CONFIG_VECTORS_OFFSET mem_reserve(__pa(&_WindowVectors_text_start), diff --git a/arch/xtensa/kernel/signal.c b/arch/xtensa/kernel/signal.c index dae83cddd6ca..76cee341507b 100644 --- a/arch/xtensa/kernel/signal.c +++ b/arch/xtensa/kernel/signal.c @@ -236,9 +236,9 @@ restore_sigcontext(struct pt_regs *regs, struct rt_sigframe __user *frame) * Do a signal return; undo the signal stack. */ -asmlinkage long xtensa_rt_sigreturn(long a0, long a1, long a2, long a3, - long a4, long a5, struct pt_regs *regs) +asmlinkage long xtensa_rt_sigreturn(void) { + struct pt_regs *regs = current_pt_regs(); struct rt_sigframe __user *frame; sigset_t set; int ret; diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c index 4a6c495ce9b6..87bd68dd7687 100644 --- a/arch/xtensa/kernel/traps.c +++ b/arch/xtensa/kernel/traps.c @@ -491,32 +491,27 @@ void show_trace(struct task_struct *task, unsigned long *sp) pr_info("Call Trace:\n"); walk_stackframe(sp, show_trace_cb, NULL); -#ifndef CONFIG_KALLSYMS - pr_cont("\n"); -#endif } -static int kstack_depth_to_print = 24; +#define STACK_DUMP_ENTRY_SIZE 4 +#define STACK_DUMP_LINE_SIZE 32 +static size_t kstack_depth_to_print = CONFIG_PRINT_STACK_DEPTH; void show_stack(struct task_struct *task, unsigned long *sp) { - int i = 0; - unsigned long *stack; + size_t len; if (!sp) sp = stack_pointer(task); - stack = sp; - pr_info("Stack:\n"); + len = min((-(size_t)sp) & (THREAD_SIZE - STACK_DUMP_ENTRY_SIZE), + kstack_depth_to_print * STACK_DUMP_ENTRY_SIZE); - for (i = 0; i < kstack_depth_to_print; i++) { - if (kstack_end(sp)) - break; - pr_cont(" %08lx", *sp++); - if (i % 8 == 7) - pr_cont("\n"); - } - show_trace(task, stack); + pr_info("Stack:\n"); + print_hex_dump(KERN_INFO, " ", DUMP_PREFIX_NONE, + STACK_DUMP_LINE_SIZE, STACK_DUMP_ENTRY_SIZE, + sp, len, false); + show_trace(task, sp); } DEFINE_SPINLOCK(die_lock); diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S index 0043d5858f14..409c05cac15e 100644 --- a/arch/xtensa/kernel/vmlinux.lds.S +++ b/arch/xtensa/kernel/vmlinux.lds.S @@ -119,7 +119,7 @@ SECTIONS SCHED_TEXT CPUIDLE_TEXT LOCK_TEXT - + *(.fixup) } _etext = .; PROVIDE (etext = .); @@ -128,12 +128,11 @@ SECTIONS RO_DATA(4096) - /* Relocation table */ - - .fixup : { *(.fixup) } - /* Data section */ +#ifdef CONFIG_XIP_KERNEL + INIT_TEXT_SECTION(PAGE_SIZE) +#else _sdata = .; RW_DATA(XCHAL_ICACHE_LINESIZE, PAGE_SIZE, THREAD_SIZE) _edata = .; @@ -147,6 +146,11 @@ SECTIONS .init.data : { INIT_DATA + } +#endif + + .init.rodata : + { . = ALIGN(0x4); __tagtable_begin = .; *(.taglist) @@ -187,12 +191,16 @@ SECTIONS RELOCATE_ENTRY(_DebugInterruptVector_text, .DebugInterruptVector.text); #endif +#ifdef CONFIG_XIP_KERNEL + RELOCATE_ENTRY(_xip_data, .data); + RELOCATE_ENTRY(_xip_init_data, .init.data); +#else #if defined(CONFIG_SMP) RELOCATE_ENTRY(_SecondaryResetVector_text, .SecondaryResetVector.text); #endif +#endif - __boot_reloc_table_end = ABSOLUTE(.) ; INIT_SETUP(XCHAL_ICACHE_LINESIZE) @@ -278,7 +286,7 @@ SECTIONS . = (LOADADDR( .DoubleExceptionVector.text ) + SIZEOF( .DoubleExceptionVector.text ) + 3) & ~ 3; #endif -#if defined(CONFIG_SMP) +#if !defined(CONFIG_XIP_KERNEL) && defined(CONFIG_SMP) SECTION_VECTOR (_SecondaryResetVector_text, .SecondaryResetVector.text, @@ -291,12 +299,48 @@ SECTIONS . = ALIGN(PAGE_SIZE); +#ifndef CONFIG_XIP_KERNEL __init_end = .; BSS_SECTION(0, 8192, 0) +#endif _end = .; +#ifdef CONFIG_XIP_KERNEL + . = CONFIG_XIP_DATA_ADDR; + + _xip_start = .; + +#undef LOAD_OFFSET +#define LOAD_OFFSET \ + (CONFIG_XIP_DATA_ADDR - (LOADADDR(.dummy) + SIZEOF(.dummy) + 3) & ~ 3) + + _xip_data_start = .; + _sdata = .; + RW_DATA(XCHAL_ICACHE_LINESIZE, PAGE_SIZE, THREAD_SIZE) + _edata = .; + _xip_data_end = .; + + /* Initialization data: */ + + STRUCT_ALIGN(); + + _xip_init_data_start = .; + __init_begin = .; + .init.data : + { + INIT_DATA + } + _xip_init_data_end = .; + __init_end = .; + BSS_SECTION(0, 8192, 0) + + _xip_end = .; + +#undef LOAD_OFFSET +#endif + DWARF_DEBUG .xt.prop 0 : { KEEP(*(.xt.prop .xt.prop.* .gnu.linkonce.prop.*)) } diff --git a/arch/xtensa/mm/fault.c b/arch/xtensa/mm/fault.c index f81b1478da61..bee30a77cd70 100644 --- a/arch/xtensa/mm/fault.c +++ b/arch/xtensa/mm/fault.c @@ -197,6 +197,8 @@ vmalloc_fault: struct mm_struct *act_mm = current->active_mm; int index = pgd_index(address); pgd_t *pgd, *pgd_k; + p4d_t *p4d, *p4d_k; + pud_t *pud, *pud_k; pmd_t *pmd, *pmd_k; pte_t *pte_k; @@ -211,8 +213,18 @@ vmalloc_fault: pgd_val(*pgd) = pgd_val(*pgd_k); - pmd = pmd_offset(pgd, address); - pmd_k = pmd_offset(pgd_k, address); + p4d = p4d_offset(pgd, address); + p4d_k = p4d_offset(pgd_k, address); + if (!p4d_present(*p4d) || !p4d_present(*p4d_k)) + goto bad_page_fault; + + pud = pud_offset(p4d, address); + pud_k = pud_offset(p4d_k, address); + if (!pud_present(*pud) || !pud_present(*pud_k)) + goto bad_page_fault; + + pmd = pmd_offset(pud, address); + pmd_k = pmd_offset(pud_k, address); if (!pmd_present(*pmd) || !pmd_present(*pmd_k)) goto bad_page_fault; diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c index d898ed67d890..19c625e6d81f 100644 --- a/arch/xtensa/mm/init.c +++ b/arch/xtensa/mm/init.c @@ -193,8 +193,8 @@ void __init mem_init(void) ((max_low_pfn - min_low_pfn) * PAGE_SIZE) >> 20, (unsigned long)_text, (unsigned long)_etext, (unsigned long)(_etext - _text) >> 10, - (unsigned long)__start_rodata, (unsigned long)_sdata, - (unsigned long)(_sdata - __start_rodata) >> 10, + (unsigned long)__start_rodata, (unsigned long)__end_rodata, + (unsigned long)(__end_rodata - __start_rodata) >> 10, (unsigned long)_sdata, (unsigned long)_edata, (unsigned long)(_edata - _sdata) >> 10, (unsigned long)__init_begin, (unsigned long)__init_end, diff --git a/arch/xtensa/mm/kasan_init.c b/arch/xtensa/mm/kasan_init.c index af7152560bc3..e3baa21ff24c 100644 --- a/arch/xtensa/mm/kasan_init.c +++ b/arch/xtensa/mm/kasan_init.c @@ -20,7 +20,9 @@ void __init kasan_early_init(void) { unsigned long vaddr = KASAN_SHADOW_START; pgd_t *pgd = pgd_offset_k(vaddr); - pmd_t *pmd = pmd_offset(pgd, vaddr); + p4d_t *p4d = p4d_offset(pgd, vaddr); + pud_t *pud = pud_offset(p4d, vaddr); + pmd_t *pmd = pmd_offset(pud, vaddr); int i; for (i = 0; i < PTRS_PER_PTE; ++i) @@ -42,7 +44,9 @@ static void __init populate(void *start, void *end) unsigned long i, j; unsigned long vaddr = (unsigned long)start; pgd_t *pgd = pgd_offset_k(vaddr); - pmd_t *pmd = pmd_offset(pgd, vaddr); + p4d_t *p4d = p4d_offset(pgd, vaddr); + pud_t *pud = pud_offset(p4d, vaddr); + pmd_t *pmd = pmd_offset(pud, vaddr); pte_t *pte = memblock_alloc(n_pages * sizeof(pte_t), PAGE_SIZE); if (!pte) @@ -56,7 +60,9 @@ static void __init populate(void *start, void *end) for (k = 0; k < PTRS_PER_PTE; ++k, ++j) { phys_addr_t phys = - memblock_phys_alloc(PAGE_SIZE, PAGE_SIZE); + memblock_phys_alloc_range(PAGE_SIZE, PAGE_SIZE, + 0, + MEMBLOCK_ALLOC_ANYWHERE); if (!phys) panic("Failed to allocate page table page\n"); diff --git a/arch/xtensa/mm/mmu.c b/arch/xtensa/mm/mmu.c index 03678c4afc39..37e478a27877 100644 --- a/arch/xtensa/mm/mmu.c +++ b/arch/xtensa/mm/mmu.c @@ -22,7 +22,9 @@ static void * __init init_pmd(unsigned long vaddr, unsigned long n_pages) { pgd_t *pgd = pgd_offset_k(vaddr); - pmd_t *pmd = pmd_offset(pgd, vaddr); + p4d_t *p4d = p4d_offset(pgd, vaddr); + pud_t *pud = pud_offset(p4d, vaddr); + pmd_t *pmd = pmd_offset(pud, vaddr); pte_t *pte; unsigned long i; diff --git a/arch/xtensa/mm/tlb.c b/arch/xtensa/mm/tlb.c index 59153d0aa890..f436cf2efd8b 100644 --- a/arch/xtensa/mm/tlb.c +++ b/arch/xtensa/mm/tlb.c @@ -169,6 +169,8 @@ static unsigned get_pte_for_vaddr(unsigned vaddr) struct task_struct *task = get_current(); struct mm_struct *mm = task->mm; pgd_t *pgd; + p4d_t *p4d; + pud_t *pud; pmd_t *pmd; pte_t *pte; @@ -177,7 +179,13 @@ static unsigned get_pte_for_vaddr(unsigned vaddr) pgd = pgd_offset(mm, vaddr); if (pgd_none_or_clear_bad(pgd)) return 0; - pmd = pmd_offset(pgd, vaddr); + p4d = p4d_offset(pgd, vaddr); + if (p4d_none_or_clear_bad(p4d)) + return 0; + pud = pud_offset(p4d, vaddr); + if (pud_none_or_clear_bad(pud)) + return 0; + pmd = pmd_offset(pud, vaddr); if (pmd_none_or_clear_bad(pmd)) return 0; pte = pte_offset_map(pmd, vaddr); @@ -216,6 +224,8 @@ static int check_tlb_entry(unsigned w, unsigned e, bool dtlb) unsigned tlbidx = w | (e << PAGE_SHIFT); unsigned r0 = dtlb ? read_dtlb_virtual(tlbidx) : read_itlb_virtual(tlbidx); + unsigned r1 = dtlb ? + read_dtlb_translation(tlbidx) : read_itlb_translation(tlbidx); unsigned vpn = (r0 & PAGE_MASK) | (e << PAGE_SHIFT); unsigned pte = get_pte_for_vaddr(vpn); unsigned mm_asid = (get_rasid_register() >> 8) & ASID_MASK; @@ -231,8 +241,6 @@ static int check_tlb_entry(unsigned w, unsigned e, bool dtlb) } if (tlb_asid == mm_asid) { - unsigned r1 = dtlb ? read_dtlb_translation(tlbidx) : - read_itlb_translation(tlbidx); if ((pte ^ r1) & PAGE_MASK) { pr_err("%cTLB: way: %u, entry: %u, mapping: %08x->%08x, PTE: %08x\n", dtlb ? 'D' : 'I', w, e, r0, r1, pte); |