diff options
Diffstat (limited to 'arch')
39 files changed, 587 insertions, 491 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5eee3bcb22b5..475950c8a831 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -689,7 +689,9 @@ source "drivers/block/Kconfig" source "drivers/acorn/block/Kconfig" -if ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE +if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \ + || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \ + || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE source "drivers/ide/Kconfig" endif diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 3b948e8c2751..e0a01eef0993 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -83,7 +83,6 @@ static struct map_desc intcp_io_desc[] __initdata = { { IO_ADDRESS(INTEGRATOR_UART1_BASE), INTEGRATOR_UART1_BASE, SZ_4K, MT_DEVICE }, { IO_ADDRESS(INTEGRATOR_DBG_BASE), INTEGRATOR_DBG_BASE, SZ_4K, MT_DEVICE }, { IO_ADDRESS(INTEGRATOR_GPIO_BASE), INTEGRATOR_GPIO_BASE, SZ_4K, MT_DEVICE }, - { 0xfc900000, 0xc9000000, SZ_4K, MT_DEVICE }, { 0xfca00000, 0xca000000, SZ_4K, MT_DEVICE }, { 0xfcb00000, 0xcb000000, SZ_4K, MT_DEVICE }, }; diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index dd012d6e2f5c..f2c9e0d2b24b 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -15,6 +15,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/device.h> +#include <linux/sysdev.h> #include <linux/major.h> #include <linux/fb.h> #include <linux/interrupt.h> @@ -106,6 +107,35 @@ static void __init lubbock_init_irq(void) set_irq_type(IRQ_GPIO(0), IRQT_FALLING); } +#ifdef CONFIG_PM + +static int lubbock_irq_resume(struct sys_device *dev) +{ + LUB_IRQ_MASK_EN = lubbock_irq_enabled; + return 0; +} + +static struct sysdev_class lubbock_irq_sysclass = { + set_kset_name("cpld_irq"), + .resume = lubbock_irq_resume, +}; + +static struct sys_device lubbock_irq_device = { + .cls = &lubbock_irq_sysclass, +}; + +static int __init lubbock_irq_device_init(void) +{ + int ret = sysdev_class_register(&lubbock_irq_sysclass); + if (ret == 0) + ret = sysdev_register(&lubbock_irq_device); + return ret; +} + +device_initcall(lubbock_irq_device_init); + +#endif + static int lubbock_udc_is_connected(void) { return (LUB_MISC_RD & (1 << 9)) == 0; diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 6823ae28ae6a..9896afca751f 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/device.h> +#include <linux/sysdev.h> #include <linux/interrupt.h> #include <linux/sched.h> #include <linux/bitops.h> @@ -62,7 +63,6 @@ static struct irqchip mainstone_irq_chip = { .unmask = mainstone_unmask_irq, }; - static void mainstone_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) { @@ -100,6 +100,35 @@ static void __init mainstone_init_irq(void) set_irq_type(IRQ_GPIO(0), IRQT_FALLING); } +#ifdef CONFIG_PM + +static int mainstone_irq_resume(struct sys_device *dev) +{ + MST_INTMSKENA = mainstone_irq_enabled; + return 0; +} + +static struct sysdev_class mainstone_irq_sysclass = { + set_kset_name("cpld_irq"), + .resume = mainstone_irq_resume, +}; + +static struct sys_device mainstone_irq_device = { + .cls = &mainstone_irq_sysclass, +}; + +static int __init mainstone_irq_device_init(void) +{ + int ret = sysdev_class_register(&mainstone_irq_sysclass); + if (ret == 0) + ret = sysdev_register(&mainstone_irq_device); + return ret; +} + +device_initcall(mainstone_irq_device_init); + +#endif + static struct resource smc91x_resources[] = { [0] = { diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index b6d945a6e774..7869c3b4e62f 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -16,6 +16,7 @@ * initialization stuff for PXA machines which can be overridden later if * need be. */ +#include <linux/config.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -103,6 +104,7 @@ unsigned int get_lcdclk_frequency_10khz(void) EXPORT_SYMBOL(get_lcdclk_frequency_10khz); +#ifdef CONFIG_PM int pxa_cpu_pm_prepare(suspend_state_t state) { @@ -131,3 +133,5 @@ void pxa_cpu_pm_enter(suspend_state_t state) break; } } + +#endif diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index aa3c3b2ab75e..893964fb9659 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -120,6 +120,8 @@ EXPORT_SYMBOL(get_clk_frequency_khz); EXPORT_SYMBOL(get_memclk_frequency_10khz); EXPORT_SYMBOL(get_lcdclk_frequency_10khz); +#ifdef CONFIG_PM + int pxa_cpu_pm_prepare(suspend_state_t state) { switch (state) { @@ -153,6 +155,8 @@ void pxa_cpu_pm_enter(suspend_state_t state) } } +#endif + /* * device registration specific to PXA27x. */ diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 554e1bd30d6e..302c2a7b9b63 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -543,7 +543,7 @@ static void versatile_clcd_enable(struct clcd_fb *fb) val |= SYS_CLCD_MODE_5551; break; case 6: - val |= SYS_CLCD_MODE_565_BLSB; + val |= SYS_CLCD_MODE_565_RLSB; break; case 8: val |= SYS_CLCD_MODE_888; diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c index 45641a872550..0ff65abcd56c 100644 --- a/arch/i386/kernel/apm.c +++ b/arch/i386/kernel/apm.c @@ -1222,6 +1222,7 @@ static int suspend(int vetoable) save_processor_state(); err = set_system_power_state(APM_STATE_SUSPEND); + ignore_normal_resume = 1; restore_processor_state(); local_irq_disable(); @@ -1229,7 +1230,6 @@ static int suspend(int vetoable) spin_lock(&i8253_lock); reinit_timer(); set_time(); - ignore_normal_resume = 1; spin_unlock(&i8253_lock); write_sequnlock(&xtime_lock); diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig index 7dbf997ff205..5649fbae430e 100644 --- a/arch/m68k/configs/amiga_defconfig +++ b/arch/m68k/configs/amiga_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:05:59 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:34:23 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -135,7 +137,6 @@ CONFIG_PARPORT_1284=y # CONFIG_AMIGA_FLOPPY=y CONFIG_AMIGA_Z2RAM=y -# CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y @@ -223,17 +224,12 @@ CONFIG_SCSI_CONSTANTS=y # # SCSI low-level drivers # -# CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_AHA152X is not set -# CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DTC3280 is not set -# CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_PPA is not set @@ -244,7 +240,6 @@ CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_T128 is not set -# CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_DEBUG is not set CONFIG_A3000_SCSI=y CONFIG_A2091_SCSI=y @@ -492,7 +487,6 @@ CONFIG_HYDRA=m CONFIG_ZORRO8390=m CONFIG_APNE=m # CONFIG_NET_VENDOR_3COM is not set -# CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_AT1700 is not set @@ -620,7 +614,6 @@ CONFIG_SERIO_SERPORT=m # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig index 505a2968e604..63024b0b7ac3 100644 --- a/arch/m68k/configs/apollo_defconfig +++ b/arch/m68k/configs/apollo_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:06:00 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:34:27 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -497,7 +499,6 @@ CONFIG_SERIO_SERPORT=m CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig index 617aa73c3250..6433da2d2ce2 100644 --- a/arch/m68k/configs/atari_defconfig +++ b/arch/m68k/configs/atari_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:06:18 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:34:32 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -531,7 +533,6 @@ CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig index b501db51d9ec..da2a23a21463 100644 --- a/arch/m68k/configs/bvme6000_defconfig +++ b/arch/m68k/configs/bvme6000_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:06:19 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:34:37 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -496,7 +498,6 @@ CONFIG_SERIO_SERPORT=m CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig index 2bf6cef4f2b2..51251883adf8 100644 --- a/arch/m68k/configs/hp300_defconfig +++ b/arch/m68k/configs/hp300_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:06:21 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:34:41 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -498,7 +500,6 @@ CONFIG_SERIO_SERPORT=m CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig index 7074f856820c..15b80abfe94a 100644 --- a/arch/m68k/configs/mac_defconfig +++ b/arch/m68k/configs/mac_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:06:24 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:34:45 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -540,7 +542,6 @@ CONFIG_SERIO_SERPORT=m CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig index 61f09bc4846a..f0d5534f6830 100644 --- a/arch/m68k/configs/mvme147_defconfig +++ b/arch/m68k/configs/mvme147_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:06:28 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:34:50 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -498,7 +500,6 @@ CONFIG_SERIO_SERPORT=m CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig index 69c01004ec41..1d5c46ff3c81 100644 --- a/arch/m68k/configs/mvme16x_defconfig +++ b/arch/m68k/configs/mvme16x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:06:31 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:34:53 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -497,7 +499,6 @@ CONFIG_SERIO_SERPORT=m CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig index 550ec26006c1..856238634d42 100644 --- a/arch/m68k/configs/q40_defconfig +++ b/arch/m68k/configs/q40_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:06:34 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:34:58 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -125,7 +127,6 @@ CONFIG_FW_LOADER=m # Block devices # # CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_XD is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m @@ -210,17 +211,12 @@ CONFIG_SCSI_CONSTANTS=y # # SCSI low-level drivers # -# CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_AHA152X is not set -# CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DTC3280 is not set -# CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_NCR53C406A is not set @@ -229,7 +225,6 @@ CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_T128 is not set -# CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_DEBUG is not set # @@ -466,7 +461,6 @@ CONFIG_EQUALIZER=m CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_NET_VENDOR_3COM is not set -# CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_AT1700 is not set @@ -570,7 +564,6 @@ CONFIG_SERIO_Q40KBD=m CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig index 5b5a619645aa..af903b5c5708 100644 --- a/arch/m68k/configs/sun3_defconfig +++ b/arch/m68k/configs/sun3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:06:37 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:35:02 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -171,7 +173,6 @@ CONFIG_SCSI_CONSTANTS=y # # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set -CONFIG_SUN3_SCSI=y # # Multi-device support (RAID and LVM) @@ -487,7 +488,6 @@ CONFIG_SERIO_SERPORT=m CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig index 704e42344cba..997143b7928a 100644 --- a/arch/m68k/configs/sun3x_defconfig +++ b/arch/m68k/configs/sun3x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:06:40 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:35:06 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -497,7 +499,6 @@ CONFIG_SERIO_SERPORT=m CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/m68k/defconfig b/arch/m68k/defconfig index 5b2296ecba82..7d935e48a9a8 100644 --- a/arch/m68k/defconfig +++ b/arch/m68k/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc2-m68k -# Tue Apr 5 14:05:31 2005 +# Linux kernel version: 2.6.12-rc6-m68k +# Tue Jun 7 20:34:17 2005 # CONFIG_M68K=y CONFIG_MMU=y @@ -33,6 +33,8 @@ CONFIG_KOBJECT_UEVENT=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -355,7 +357,6 @@ CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices diff --git a/arch/ppc64/configs/g5_defconfig b/arch/ppc64/configs/g5_defconfig index 0f90df0b3f9c..1eb33398648e 100644 --- a/arch/ppc64/configs/g5_defconfig +++ b/arch/ppc64/configs/g5_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11 -# Thu Mar 10 16:47:04 2005 +# Linux kernel version: 2.6.12-rc6 +# Tue Jun 14 16:59:20 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y -CONFIG_FRAME_POINTER=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -31,19 +32,20 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=17 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 @@ -87,6 +89,8 @@ CONFIG_NR_CPUS=2 # CONFIG_SCHED_SMT is not set # CONFIG_PREEMPT is not set CONFIG_GENERIC_HARDIRQS=y +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # General setup @@ -97,6 +101,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # CONFIG_HOTPLUG_CPU is not set # @@ -105,10 +110,6 @@ CONFIG_PCI_NAMES=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set @@ -293,7 +294,6 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set @@ -301,7 +301,6 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -310,6 +309,7 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set @@ -332,6 +332,7 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +# CONFIG_DM_MULTIPATH is not set # # Fusion MPT device support @@ -394,7 +395,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y CONFIG_NET_KEY=m CONFIG_INET=y @@ -564,6 +564,8 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SK98LIN is not set CONFIG_TIGON3=m +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set # # Ethernet (10000 Mbit) @@ -631,18 +633,6 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -660,6 +650,16 @@ CONFIG_INPUT_MOUSE=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -676,6 +676,7 @@ CONFIG_HW_CONSOLE=y # Non-8250 serial port support # # CONFIG_SERIAL_PMACZILOG is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -698,9 +699,12 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Ftape, the floppy tape device driver # +CONFIG_AGP=m +CONFIG_AGP_UNINORTH=m # CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set # # TPM devices @@ -730,12 +734,11 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set CONFIG_I2C_KEYWEST=y -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set @@ -772,6 +775,7 @@ CONFIG_I2C_KEYWEST=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set @@ -785,6 +789,7 @@ CONFIG_I2C_KEYWEST=y # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -817,6 +822,11 @@ CONFIG_I2C_KEYWEST=y # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set @@ -830,6 +840,7 @@ CONFIG_FB_OF=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set +# CONFIG_FB_NVIDIA is not set CONFIG_FB_RIVA=y # CONFIG_FB_RIVA_I2C is not set # CONFIG_FB_RIVA_DEBUG is not set @@ -847,6 +858,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -880,6 +892,8 @@ CONFIG_LCD_DEVICE=y # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -890,8 +904,6 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers @@ -917,7 +929,6 @@ CONFIG_USB_PRINTER=y # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_RW_DETECT=y CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y @@ -1004,8 +1015,10 @@ CONFIG_USB_MON=y # CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set CONFIG_USB_SERIAL_BELKIN=m CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set CONFIG_USB_SERIAL_CYPRESS_M8=m CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m @@ -1034,6 +1047,7 @@ CONFIG_USB_SERIAL_KLSI=m CONFIG_USB_SERIAL_KOBIL_SCT=m CONFIG_USB_SERIAL_MCT_U232=m CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set CONFIG_USB_SERIAL_SAFE=m CONFIG_USB_SERIAL_SAFE_PADDED=y CONFIG_USB_SERIAL_TI=m @@ -1270,11 +1284,13 @@ CONFIG_OPROFILE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y -# CONFIG_PRINTK_TIME is not set +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set diff --git a/arch/ppc64/configs/iSeries_defconfig b/arch/ppc64/configs/iSeries_defconfig index a39e9d2e25da..f6a2b99afd63 100644 --- a/arch/ppc64/configs/iSeries_defconfig +++ b/arch/ppc64/configs/iSeries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc3-bk6 -# Wed Feb 9 23:34:52 2005 +# Linux kernel version: 2.6.12-rc6 +# Tue Jun 14 17:01:28 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y -CONFIG_FRAME_POINTER=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -30,24 +31,29 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=17 +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -79,6 +85,8 @@ CONFIG_NR_CPUS=32 CONFIG_GENERIC_HARDIRQS=y CONFIG_MSCHUNKS=y CONFIG_LPARCFG=y +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # General setup @@ -89,6 +97,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support @@ -96,10 +105,6 @@ CONFIG_PCI_NAMES=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set @@ -210,7 +215,6 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set @@ -219,7 +223,6 @@ CONFIG_SCSI_IBMVSCSI=m # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -228,6 +231,7 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set @@ -250,6 +254,7 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +# CONFIG_DM_MULTIPATH is not set # # Fusion MPT device support @@ -280,7 +285,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y CONFIG_NET_KEY=m CONFIG_INET=y @@ -445,7 +449,6 @@ CONFIG_PCNET32=y # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y -# CONFIG_E100_NAPI is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set @@ -471,6 +474,7 @@ CONFIG_E1000=m # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) @@ -539,14 +543,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -556,6 +552,12 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # # CONFIG_SERIAL_NONSTANDARD is not set @@ -570,6 +572,7 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_SERIAL_CORE=m CONFIG_SERIAL_ICOM=m +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -592,9 +595,16 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Ftape, the floppy tape device driver # +# CONFIG_AGP is not set # CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set # # I2C support @@ -633,13 +643,9 @@ CONFIG_MAX_RAW_DEVS=256 # # USB support # -# CONFIG_USB is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# +# CONFIG_USB is not set # # USB Gadget Support @@ -848,10 +854,13 @@ CONFIG_OPROFILE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set @@ -881,6 +890,7 @@ CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m diff --git a/arch/ppc64/configs/maple_defconfig b/arch/ppc64/configs/maple_defconfig index cf527501915c..8051b0f47b6f 100644 --- a/arch/ppc64/configs/maple_defconfig +++ b/arch/ppc64/configs/maple_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc3-bk6 -# Wed Feb 9 23:34:53 2005 +# Linux kernel version: 2.6.12-rc6 +# Tue Jun 14 17:12:48 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y -CONFIG_FRAME_POINTER=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -30,24 +31,28 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_AUDIT is not set # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -84,6 +89,8 @@ CONFIG_NR_CPUS=2 # CONFIG_SCHED_SMT is not set # CONFIG_PREEMPT is not set CONFIG_GENERIC_HARDIRQS=y +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # General setup @@ -94,6 +101,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support @@ -101,10 +109,6 @@ CONFIG_PCI_NAMES=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set @@ -261,7 +265,6 @@ CONFIG_NET=y # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -376,6 +379,8 @@ CONFIG_E1000=y # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set # # Ethernet (10000 Mbit) @@ -432,14 +437,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -449,6 +446,12 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -469,7 +472,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -492,8 +495,15 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Ftape, the floppy tape device driver # +# CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set # # I2C support @@ -518,8 +528,8 @@ CONFIG_I2C_ALGOBIT=y CONFIG_I2C_AMD8111=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -545,7 +555,9 @@ CONFIG_I2C_AMD8111=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -556,9 +568,11 @@ CONFIG_I2C_AMD8111=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set @@ -568,6 +582,7 @@ CONFIG_I2C_AMD8111=y # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -615,6 +630,8 @@ CONFIG_DUMMY_CONSOLE=y # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -625,8 +642,6 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers @@ -635,6 +650,8 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_SPLIT_ISO=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set @@ -688,6 +705,7 @@ CONFIG_USB_HIDINPUT=y CONFIG_USB_PEGASUS=y # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y # # USB port drivers @@ -699,8 +717,10 @@ CONFIG_USB_PEGASUS=y CONFIG_USB_SERIAL=y # CONFIG_USB_SERIAL_CONSOLE is not set CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set CONFIG_USB_SERIAL_CYPRESS_M8=m # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set @@ -729,6 +749,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set CONFIG_USB_SERIAL_TI=m # CONFIG_USB_SERIAL_CYBERJACK is not set @@ -750,6 +771,7 @@ CONFIG_USB_EZUSB=y # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_TEST is not set # @@ -936,10 +958,13 @@ CONFIG_NLS_UTF8=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_SCHEDSTATS is not set CONFIG_DEBUG_SLAB=y +# CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set @@ -971,6 +996,7 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set diff --git a/arch/ppc64/configs/pSeries_defconfig b/arch/ppc64/configs/pSeries_defconfig index 4fecf237d5c9..3eb5ef25d3a3 100644 --- a/arch/ppc64/configs/pSeries_defconfig +++ b/arch/ppc64/configs/pSeries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc3-bk6 -# Wed Feb 9 23:34:54 2005 +# Linux kernel version: 2.6.12-rc6 +# Tue Jun 14 17:13:47 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y -CONFIG_FRAME_POINTER=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -30,24 +31,29 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=17 +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_CPUSETS=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -89,9 +95,12 @@ CONFIG_SCHED_SMT=y CONFIG_EEH=y CONFIG_GENERIC_HARDIRQS=y CONFIG_PPC_RTAS=y +CONFIG_RTAS_PROC=y CONFIG_RTAS_FLASH=m CONFIG_SCANLOG=m CONFIG_LPARCFG=y +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # General setup @@ -102,6 +111,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set CONFIG_HOTPLUG_CPU=y # @@ -110,10 +120,6 @@ CONFIG_HOTPLUG_CPU=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # PCI Hotplug Support # CONFIG_HOTPLUG_PCI=m @@ -147,11 +153,10 @@ CONFIG_FW_LOADER=y # CONFIG_PARPORT=m CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_OTHER is not set +# CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_1284 is not set # @@ -293,7 +298,6 @@ CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set @@ -310,7 +314,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_IPR=y CONFIG_SCSI_IPR_TRACE=y CONFIG_SCSI_IPR_DUMP=y -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -319,6 +322,7 @@ CONFIG_SCSI_QLA22XX=m CONFIG_SCSI_QLA2300=m CONFIG_SCSI_QLA2322=m CONFIG_SCSI_QLA6312=m +CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set @@ -341,6 +345,8 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m # # Fusion MPT device support @@ -371,7 +377,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y CONFIG_NET_KEY=m CONFIG_INET=y @@ -539,7 +544,6 @@ CONFIG_PCNET32=y # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y -# CONFIG_E100_NAPI is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set @@ -565,6 +569,8 @@ CONFIG_E1000=y # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set # # Ethernet (10000 Mbit) @@ -636,20 +642,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -669,6 +661,18 @@ CONFIG_INPUT_PCSPKR=m # CONFIG_INPUT_UINPUT is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -689,8 +693,8 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set CONFIG_SERIAL_ICOM=m +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -718,9 +722,16 @@ CONFIG_HVCS=m # # Ftape, the floppy tape device driver # +# CONFIG_AGP is not set # CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=1024 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set # # I2C support @@ -745,8 +756,8 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set @@ -773,7 +784,9 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -784,9 +797,11 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set @@ -796,6 +811,7 @@ CONFIG_I2C_ALGOBIT=y # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -828,8 +844,13 @@ CONFIG_I2C_ALGOBIT=y # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y -# CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set @@ -838,6 +859,7 @@ CONFIG_FB_OF=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set +# CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set CONFIG_FB_MATROX=y CONFIG_FB_MATROX_MILLENIUM=y @@ -858,6 +880,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -891,6 +914,8 @@ CONFIG_LCD_DEVICE=y # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -901,8 +926,6 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers @@ -911,6 +934,8 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -926,12 +951,11 @@ CONFIG_USB_OHCI_HCD=y # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_RW_DETECT is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set +# CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set @@ -975,6 +999,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y # # USB port drivers @@ -1000,6 +1025,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_TEST is not set # @@ -1208,10 +1234,13 @@ CONFIG_OPROFILE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set @@ -1243,6 +1272,7 @@ CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m diff --git a/arch/ppc64/defconfig b/arch/ppc64/defconfig index 537b1cc82eab..2f31bf3046f9 100644 --- a/arch/ppc64/defconfig +++ b/arch/ppc64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc3-bk6 -# Wed Feb 9 23:34:51 2005 +# Linux kernel version: 2.6.12-rc5-git9 +# Sun Jun 5 09:26:47 2005 # CONFIG_64BIT=y CONFIG_MMU=y @@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_HAVE_DEC_LOCK=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y -CONFIG_FRAME_POINTER=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_FORCE_MAX_ZONEORDER=13 # @@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -30,24 +31,28 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_AUDIT is not set CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_CPUSETS=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -91,9 +96,12 @@ CONFIG_DISCONTIGMEM=y CONFIG_EEH=y CONFIG_GENERIC_HARDIRQS=y CONFIG_PPC_RTAS=y +CONFIG_RTAS_PROC=y CONFIG_RTAS_FLASH=m CONFIG_SCANLOG=m CONFIG_LPARCFG=y +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # General setup @@ -104,6 +112,7 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m # CONFIG_PCI_LEGACY_PROC is not set # CONFIG_PCI_NAMES is not set +# CONFIG_PCI_DEBUG is not set CONFIG_HOTPLUG_CPU=y # @@ -112,10 +121,6 @@ CONFIG_HOTPLUG_CPU=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # PCI Hotplug Support # CONFIG_HOTPLUG_PCI=m @@ -149,11 +154,10 @@ CONFIG_FW_LOADER=y # CONFIG_PARPORT=m CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_OTHER is not set +# CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_1284 is not set # @@ -301,6 +305,7 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_NV is not set # CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set # CONFIG_SCSI_SATA_SIS is not set @@ -310,7 +315,6 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set @@ -327,7 +331,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_IPR=y CONFIG_SCSI_IPR_TRACE=y CONFIG_SCSI_IPR_DUMP=y -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -336,6 +339,7 @@ CONFIG_SCSI_QLA22XX=m CONFIG_SCSI_QLA2300=m CONFIG_SCSI_QLA2322=m CONFIG_SCSI_QLA6312=m +CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set CONFIG_SCSI_DEBUG=m @@ -358,6 +362,8 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m # # Fusion MPT device support @@ -405,6 +411,7 @@ CONFIG_IEEE1394_AMDTP=m # CONFIG_ADB=y CONFIG_ADB_PMU=y +CONFIG_PMAC_SMU=y # CONFIG_PMAC_PBOOK is not set # CONFIG_PMAC_BACKLIGHT is not set # CONFIG_INPUT_ADBHID is not set @@ -420,7 +427,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y CONFIG_NET_KEY=m CONFIG_INET=y @@ -588,7 +594,6 @@ CONFIG_PCNET32=y # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y -# CONFIG_E100_NAPI is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set @@ -614,6 +619,8 @@ CONFIG_E1000=y # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set # # Ethernet (10000 Mbit) @@ -683,20 +690,6 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -716,6 +709,18 @@ CONFIG_INPUT_PCSPKR=m # CONFIG_INPUT_UINPUT is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -738,6 +743,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_PMACZILOG is not set CONFIG_SERIAL_ICOM=m +CONFIG_SERIAL_JSM=m CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -766,9 +772,16 @@ CONFIG_HVCS=m # # Ftape, the floppy tape device driver # +# CONFIG_AGP is not set # CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set # # I2C support @@ -793,9 +806,9 @@ CONFIG_I2C_ALGOBIT=y CONFIG_I2C_AMD8111=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set CONFIG_I2C_KEYWEST=y -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set @@ -822,7 +835,9 @@ CONFIG_I2C_KEYWEST=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -833,9 +848,11 @@ CONFIG_I2C_KEYWEST=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set @@ -845,6 +862,7 @@ CONFIG_I2C_KEYWEST=y # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -877,6 +895,11 @@ CONFIG_I2C_KEYWEST=y # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set @@ -890,9 +913,8 @@ CONFIG_FB_OF=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set -CONFIG_FB_RIVA=y -CONFIG_FB_RIVA_I2C=y -# CONFIG_FB_RIVA_DEBUG is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set CONFIG_FB_MATROX=y CONFIG_FB_MATROX_MILLENIUM=y CONFIG_FB_MATROX_MYSTIQUE=y @@ -913,6 +935,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -946,6 +969,8 @@ CONFIG_LCD_DEVICE=y # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -956,8 +981,6 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers @@ -966,6 +989,8 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -981,12 +1006,11 @@ CONFIG_USB_OHCI_HCD=y # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_RW_DETECT=y # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set +# CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set @@ -1030,6 +1054,7 @@ CONFIG_USB_HIDDEV=y CONFIG_USB_PEGASUS=y # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +# CONFIG_USB_MON is not set # # USB port drivers @@ -1055,6 +1080,7 @@ CONFIG_USB_PEGASUS=y # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_TEST is not set # @@ -1276,10 +1302,13 @@ CONFIG_OPROFILE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set @@ -1311,6 +1340,7 @@ CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m diff --git a/arch/um/drivers/Makefile b/arch/um/drivers/Makefile index 323f72c64cd2..b2de9916c32c 100644 --- a/arch/um/drivers/Makefile +++ b/arch/um/drivers/Makefile @@ -22,8 +22,8 @@ obj-y := stdio_console.o fd.o chan_kern.o chan_user.o line.o obj-$(CONFIG_SSL) += ssl.o obj-$(CONFIG_STDERR_CONSOLE) += stderr_console.o -obj-$(CONFIG_UML_NET_SLIP) += slip.o -obj-$(CONFIG_UML_NET_SLIRP) += slirp.o +obj-$(CONFIG_UML_NET_SLIP) += slip.o slip_common.o +obj-$(CONFIG_UML_NET_SLIRP) += slirp.o slip_common.o obj-$(CONFIG_UML_NET_DAEMON) += daemon.o obj-$(CONFIG_UML_NET_MCAST) += mcast.o #obj-$(CONFIG_UML_NET_PCAP) += pcap.o $(PCAP) @@ -41,6 +41,6 @@ obj-$(CONFIG_UML_WATCHDOG) += harddog.o obj-$(CONFIG_BLK_DEV_COW_COMMON) += cow_user.o obj-$(CONFIG_UML_RANDOM) += random.o -USER_OBJS := fd.o null.o pty.o tty.o xterm.o +USER_OBJS := fd.o null.o pty.o tty.o xterm.o slip_common.o include arch/um/scripts/Makefile.rules diff --git a/arch/um/drivers/slip.h b/arch/um/drivers/slip.h index d523618cd5ac..bb0dab41c2e4 100644 --- a/arch/um/drivers/slip.h +++ b/arch/um/drivers/slip.h @@ -1,10 +1,7 @@ #ifndef __UM_SLIP_H #define __UM_SLIP_H -#define BUF_SIZE 1500 - /* two bytes each for a (pathological) max packet of escaped chars + * - * terminating END char + initial END char */ -#define ENC_BUF_SIZE (2 * BUF_SIZE + 2) +#include "slip_common.h" struct slip_data { void *dev; @@ -12,28 +9,12 @@ struct slip_data { char *addr; char *gate_addr; int slave; - unsigned char ibuf[ENC_BUF_SIZE]; - unsigned char obuf[ENC_BUF_SIZE]; - int more; /* more data: do not read fd until ibuf has been drained */ - int pos; - int esc; + struct slip_proto slip; }; extern struct net_user_info slip_user_info; -extern int set_umn_addr(int fd, char *addr, char *ptp_addr); extern int slip_user_read(int fd, void *buf, int len, struct slip_data *pri); extern int slip_user_write(int fd, void *buf, int len, struct slip_data *pri); #endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/drivers/slip_common.c b/arch/um/drivers/slip_common.c new file mode 100644 index 000000000000..e89cfc68fc3e --- /dev/null +++ b/arch/um/drivers/slip_common.c @@ -0,0 +1,54 @@ +#include <string.h> +#include "slip_common.h" +#include "net_user.h" + +int slip_proto_read(int fd, void *buf, int len, struct slip_proto *slip) +{ + int i, n, size, start; + + if(slip->more > 0){ + i = 0; + while(i < slip->more){ + size = slip_unesc(slip->ibuf[i++], slip->ibuf, + &slip->pos, &slip->esc); + if(size){ + memcpy(buf, slip->ibuf, size); + memmove(slip->ibuf, &slip->ibuf[i], + slip->more - i); + slip->more = slip->more - i; + return size; + } + } + slip->more = 0; + } + + n = net_read(fd, &slip->ibuf[slip->pos], + sizeof(slip->ibuf) - slip->pos); + if(n <= 0) + return n; + + start = slip->pos; + for(i = 0; i < n; i++){ + size = slip_unesc(slip->ibuf[start + i], slip->ibuf,&slip->pos, + &slip->esc); + if(size){ + memcpy(buf, slip->ibuf, size); + memmove(slip->ibuf, &slip->ibuf[start+i+1], + n - (i + 1)); + slip->more = n - (i + 1); + return size; + } + } + return 0; +} + +int slip_proto_write(int fd, void *buf, int len, struct slip_proto *slip) +{ + int actual, n; + + actual = slip_esc(buf, slip->obuf, len); + n = net_write(fd, slip->obuf, actual); + if(n < 0) + return n; + else return len; +} diff --git a/arch/um/drivers/slip_proto.h b/arch/um/drivers/slip_common.h index 4c4d94a33100..2ae76d8f1be1 100644 --- a/arch/um/drivers/slip_proto.h +++ b/arch/um/drivers/slip_common.h @@ -1,10 +1,10 @@ -/* - * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ +#ifndef __UM_SLIP_COMMON_H +#define __UM_SLIP_COMMON_H -#ifndef __UM_SLIP_PROTO_H__ -#define __UM_SLIP_PROTO_H__ +#define BUF_SIZE 1500 + /* two bytes each for a (pathological) max packet of escaped chars + * + * terminating END char + initial END char */ +#define ENC_BUF_SIZE (2 * BUF_SIZE + 2) /* SLIP protocol characters. */ #define SLIP_END 0300 /* indicates end of frame */ @@ -80,15 +80,25 @@ static inline int slip_esc(unsigned char *s, unsigned char *d, int len) return (ptr - d); } -#endif +struct slip_proto { + unsigned char ibuf[ENC_BUF_SIZE]; + unsigned char obuf[ENC_BUF_SIZE]; + int more; /* more data: do not read fd until ibuf has been drained */ + int pos; + int esc; +}; + +#define SLIP_PROTO_INIT { \ + .ibuf = { '\0' }, \ + .obuf = { '\0' }, \ + .more = 0, \ + .pos = 0, \ + .esc = 0 \ +} -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ +extern int slip_proto_read(int fd, void *buf, int len, + struct slip_proto *slip); +extern int slip_proto_write(int fd, void *buf, int len, + struct slip_proto *slip); + +#endif diff --git a/arch/um/drivers/slip_kern.c b/arch/um/drivers/slip_kern.c index 0886eedba213..9a6f5c85f902 100644 --- a/arch/um/drivers/slip_kern.c +++ b/arch/um/drivers/slip_kern.c @@ -26,16 +26,16 @@ void slip_init(struct net_device *dev, void *data) .addr = NULL, .gate_addr = init->gate_addr, .slave = -1, - .ibuf = { '\0' }, - .obuf = { '\0' }, - .pos = 0, - .esc = 0, + .slip = SLIP_PROTO_INIT, .dev = dev }); dev->init = NULL; + dev->header_cache_update = NULL; + dev->hard_header_cache = NULL; + dev->hard_header = NULL; dev->hard_header_len = 0; - dev->addr_len = 4; - dev->type = ARPHRD_ETHER; + dev->addr_len = 0; + dev->type = ARPHRD_SLIP; dev->tx_queue_len = 256; dev->flags = IFF_NOARP; printk("SLIP backend - SLIP IP = %s\n", spri->gate_addr); diff --git a/arch/um/drivers/slip_user.c b/arch/um/drivers/slip_user.c index d94846b1b4cf..71af444e591f 100644 --- a/arch/um/drivers/slip_user.c +++ b/arch/um/drivers/slip_user.c @@ -13,7 +13,7 @@ #include "user.h" #include "net_user.h" #include "slip.h" -#include "slip_proto.h" +#include "slip_common.h" #include "helper.h" #include "os.h" @@ -77,41 +77,51 @@ static int slip_tramp(char **argv, int fd) err = os_pipe(fds, 1, 0); if(err < 0){ printk("slip_tramp : pipe failed, err = %d\n", -err); - return(err); + goto out; } err = 0; pe_data.stdin = fd; pe_data.stdout = fds[1]; pe_data.close_me = fds[0]; - pid = run_helper(slip_pre_exec, &pe_data, argv, NULL); + err = run_helper(slip_pre_exec, &pe_data, argv, NULL); + if(err < 0) + goto out_close; + pid = err; + + output_len = page_size(); + output = um_kmalloc(output_len); + if(output == NULL){ + printk("slip_tramp : failed to allocate output buffer\n"); + os_kill_process(pid, 1); + err = -ENOMEM; + goto out_free; + } - if(pid < 0) err = pid; - else { - output_len = page_size(); - output = um_kmalloc(output_len); - if(output == NULL) - printk("slip_tramp : failed to allocate output " - "buffer\n"); - - os_close_file(fds[1]); - read_output(fds[0], output, output_len); - if(output != NULL){ - printk("%s", output); - kfree(output); - } - CATCH_EINTR(err = waitpid(pid, &status, 0)); - if(err < 0) - err = errno; - else if(!WIFEXITED(status) || (WEXITSTATUS(status) != 0)){ - printk("'%s' didn't exit with status 0\n", argv[0]); - err = -EINVAL; - } + os_close_file(fds[1]); + read_output(fds[0], output, output_len); + printk("%s", output); + + CATCH_EINTR(err = waitpid(pid, &status, 0)); + if(err < 0) + err = errno; + else if(!WIFEXITED(status) || (WEXITSTATUS(status) != 0)){ + printk("'%s' didn't exit with status 0\n", argv[0]); + err = -EINVAL; } + else err = 0; os_close_file(fds[0]); - return(err); +out_free: + kfree(output); + return err; + +out_close: + os_close_file(fds[0]); + os_close_file(fds[1]); +out: + return err; } static int slip_open(void *data) @@ -123,21 +133,26 @@ static int slip_open(void *data) NULL }; int sfd, mfd, err; - mfd = get_pty(); - if(mfd < 0){ - printk("umn : Failed to open pty, err = %d\n", -mfd); - return(mfd); + err = get_pty(); + if(err < 0){ + printk("slip-open : Failed to open pty, err = %d\n", -err); + goto out; } - sfd = os_open_file(ptsname(mfd), of_rdwr(OPENFLAGS()), 0); - if(sfd < 0){ - printk("Couldn't open tty for slip line, err = %d\n", -sfd); - os_close_file(mfd); - return(sfd); + mfd = err; + + err = os_open_file(ptsname(mfd), of_rdwr(OPENFLAGS()), 0); + if(err < 0){ + printk("Couldn't open tty for slip line, err = %d\n", -err); + goto out_close; } - if(set_up_tty(sfd)) return(-1); + sfd = err; + + if(set_up_tty(sfd)) + goto out_close2; + pri->slave = sfd; - pri->pos = 0; - pri->esc = 0; + pri->slip.pos = 0; + pri->slip.esc = 0; if(pri->gate_addr != NULL){ sprintf(version_buf, "%d", UML_NET_VERSION); strcpy(gate_buf, pri->gate_addr); @@ -146,12 +161,12 @@ static int slip_open(void *data) if(err < 0){ printk("slip_tramp failed - err = %d\n", -err); - return(err); + goto out_close2; } err = os_get_ifname(pri->slave, pri->name); if(err < 0){ printk("get_ifname failed, err = %d\n", -err); - return(err); + goto out_close2; } iter_addresses(pri->dev, open_addr, pri->name); } @@ -160,10 +175,16 @@ static int slip_open(void *data) if(err < 0){ printk("Failed to set slip discipline encapsulation - " "err = %d\n", -err); - return(err); + goto out_close2; } } return(mfd); +out_close2: + os_close_file(sfd); +out_close: + os_close_file(mfd); +out: + return err; } static void slip_close(int fd, void *data) @@ -190,48 +211,12 @@ static void slip_close(int fd, void *data) int slip_user_read(int fd, void *buf, int len, struct slip_data *pri) { - int i, n, size, start; - - if(pri->more>0) { - i = 0; - while(i < pri->more) { - size = slip_unesc(pri->ibuf[i++], - pri->ibuf, &pri->pos, &pri->esc); - if(size){ - memcpy(buf, pri->ibuf, size); - memmove(pri->ibuf, &pri->ibuf[i], pri->more-i); - pri->more=pri->more-i; - return(size); - } - } - pri->more=0; - } - - n = net_read(fd, &pri->ibuf[pri->pos], sizeof(pri->ibuf) - pri->pos); - if(n <= 0) return(n); - - start = pri->pos; - for(i = 0; i < n; i++){ - size = slip_unesc(pri->ibuf[start + i], - pri->ibuf, &pri->pos, &pri->esc); - if(size){ - memcpy(buf, pri->ibuf, size); - memmove(pri->ibuf, &pri->ibuf[start+i+1], n-(i+1)); - pri->more=n-(i+1); - return(size); - } - } - return(0); + return slip_proto_read(fd, buf, len, &pri->slip); } int slip_user_write(int fd, void *buf, int len, struct slip_data *pri) { - int actual, n; - - actual = slip_esc(buf, pri->obuf, len); - n = net_write(fd, pri->obuf, actual); - if(n < 0) return(n); - else return(len); + return slip_proto_write(fd, buf, len, &pri->slip); } static int slip_set_mtu(int mtu, void *data) @@ -267,14 +252,3 @@ struct net_user_info slip_user_info = { .delete_address = slip_del_addr, .max_packet = BUF_SIZE }; - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/drivers/slirp.h b/arch/um/drivers/slirp.h index afa4e30284fd..6cf88ab580c9 100644 --- a/arch/um/drivers/slirp.h +++ b/arch/um/drivers/slirp.h @@ -1,10 +1,7 @@ #ifndef __UM_SLIRP_H #define __UM_SLIRP_H -#define BUF_SIZE 1500 - /* two bytes each for a (pathological) max packet of escaped chars + * - * terminating END char + initial END char */ -#define ENC_BUF_SIZE (2 * BUF_SIZE + 2) +#include "slip_common.h" #define SLIRP_MAX_ARGS 100 /* @@ -24,28 +21,13 @@ struct slirp_data { struct arg_list_dummy_wrapper argw; int pid; int slave; - unsigned char ibuf[ENC_BUF_SIZE]; - unsigned char obuf[ENC_BUF_SIZE]; - int more; /* more data: do not read fd until ibuf has been drained */ - int pos; - int esc; + struct slip_proto slip; }; extern struct net_user_info slirp_user_info; -extern int set_umn_addr(int fd, char *addr, char *ptp_addr); extern int slirp_user_read(int fd, void *buf, int len, struct slirp_data *pri); -extern int slirp_user_write(int fd, void *buf, int len, struct slirp_data *pri); +extern int slirp_user_write(int fd, void *buf, int len, + struct slirp_data *pri); #endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/drivers/slirp_kern.c b/arch/um/drivers/slirp_kern.c index c9d6b52a831d..9864d27afdbe 100644 --- a/arch/um/drivers/slirp_kern.c +++ b/arch/um/drivers/slirp_kern.c @@ -25,10 +25,7 @@ void slirp_init(struct net_device *dev, void *data) { .argw = init->argw, .pid = -1, .slave = -1, - .ibuf = { '\0' }, - .obuf = { '\0' }, - .pos = 0, - .esc = 0, + .slip = SLIP_PROTO_INIT, .dev = dev }); dev->init = NULL; diff --git a/arch/um/drivers/slirp_user.c b/arch/um/drivers/slirp_user.c index c322515c71cc..8d91f663d82c 100644 --- a/arch/um/drivers/slirp_user.c +++ b/arch/um/drivers/slirp_user.c @@ -12,7 +12,7 @@ #include "user.h" #include "net_user.h" #include "slirp.h" -#include "slip_proto.h" +#include "slip_common.h" #include "helper.h" #include "os.h" @@ -48,47 +48,32 @@ static int slirp_tramp(char **argv, int fd) return(pid); } -/* XXX This is just a trivial wrapper around os_pipe */ -static int slirp_datachan(int *mfd, int *sfd) -{ - int fds[2], err; - - err = os_pipe(fds, 1, 1); - if(err < 0){ - printk("slirp_datachan: Failed to open pipe, err = %d\n", -err); - return(err); - } - - *mfd = fds[0]; - *sfd = fds[1]; - return(0); -} - static int slirp_open(void *data) { struct slirp_data *pri = data; - int sfd, mfd, pid, err; + int fds[2], pid, err; - err = slirp_datachan(&mfd, &sfd); + err = os_pipe(fds, 1, 1); if(err) return(err); - pid = slirp_tramp(pri->argw.argv, sfd); - - if(pid < 0){ - printk("slirp_tramp failed - errno = %d\n", -pid); - os_close_file(sfd); - os_close_file(mfd); - return(pid); + err = slirp_tramp(pri->argw.argv, fds[1]); + if(err < 0){ + printk("slirp_tramp failed - errno = %d\n", -err); + goto out; } - - pri->slave = sfd; - pri->pos = 0; - pri->esc = 0; - - pri->pid = pid; - - return(mfd); + pid = err; + + pri->slave = fds[1]; + pri->slip.pos = 0; + pri->slip.esc = 0; + pri->pid = err; + + return(fds[0]); +out: + os_close_file(fds[0]); + os_close_file(fds[1]); + return err; } static void slirp_close(int fd, void *data) @@ -129,48 +114,12 @@ static void slirp_close(int fd, void *data) int slirp_user_read(int fd, void *buf, int len, struct slirp_data *pri) { - int i, n, size, start; - - if(pri->more>0) { - i = 0; - while(i < pri->more) { - size = slip_unesc(pri->ibuf[i++], - pri->ibuf,&pri->pos,&pri->esc); - if(size){ - memcpy(buf, pri->ibuf, size); - memmove(pri->ibuf, &pri->ibuf[i], pri->more-i); - pri->more=pri->more-i; - return(size); - } - } - pri->more=0; - } - - n = net_read(fd, &pri->ibuf[pri->pos], sizeof(pri->ibuf) - pri->pos); - if(n <= 0) return(n); - - start = pri->pos; - for(i = 0; i < n; i++){ - size = slip_unesc(pri->ibuf[start + i], - pri->ibuf,&pri->pos,&pri->esc); - if(size){ - memcpy(buf, pri->ibuf, size); - memmove(pri->ibuf, &pri->ibuf[start+i+1], n-(i+1)); - pri->more=n-(i+1); - return(size); - } - } - return(0); + return slip_proto_read(fd, buf, len, &pri->slip); } int slirp_user_write(int fd, void *buf, int len, struct slirp_data *pri) { - int actual, n; - - actual = slip_esc(buf, pri->obuf, len); - n = net_write(fd, pri->obuf, actual); - if(n < 0) return(n); - else return(len); + return slip_proto_write(fd, buf, len, &pri->slip); } static int slirp_set_mtu(int mtu, void *data) @@ -188,14 +137,3 @@ struct net_user_info slirp_user_info = { .delete_address = NULL, .max_packet = BUF_SIZE }; - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/include/sysdep-i386/ptrace.h b/arch/um/include/sysdep-i386/ptrace.h index 6eaeb9919983..c8ee9559f3ab 100644 --- a/arch/um/include/sysdep-i386/ptrace.h +++ b/arch/um/include/sysdep-i386/ptrace.h @@ -8,6 +8,8 @@ #include "uml-config.h" #include "user_constants.h" +#include "sysdep/faultinfo.h" +#include "choose-mode.h" #define MAX_REG_NR (UM_FRAME_SIZE / sizeof(unsigned long)) #define MAX_REG_OFFSET (UM_FRAME_SIZE) @@ -58,9 +60,6 @@ extern int sysemu_supported; #define PTRACE_SYSEMU_SINGLESTEP 32 #endif -#include "sysdep/faultinfo.h" -#include "choose-mode.h" - union uml_pt_regs { #ifdef UML_CONFIG_MODE_TT struct tt_regs { diff --git a/arch/um/kernel/main.c b/arch/um/kernel/main.c index e42e6364ca13..e59f58152678 100644 --- a/arch/um/kernel/main.c +++ b/arch/um/kernel/main.c @@ -24,8 +24,6 @@ #include "mode.h" #include "choose-mode.h" #include "uml-config.h" -#include "irq_user.h" -#include "time_user.h" #include "os.h" /* Set in set_stklim, which is called from main and __wrap_malloc. diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c index 51f8e5a8ac6a..1b5ef3e96c71 100644 --- a/arch/um/kernel/process.c +++ b/arch/um/kernel/process.c @@ -30,7 +30,6 @@ #include "init.h" #include "os.h" #include "uml-config.h" -#include "ptrace_user.h" #include "choose-mode.h" #include "mode.h" #ifdef UML_CONFIG_MODE_SKAS @@ -131,7 +130,7 @@ int start_fork_tramp(void *thread_arg, unsigned long temp_stack, return(arg.pid); } -static int ptrace_child(void *arg) +static int ptrace_child(void) { int ret; int pid = os_getpid(), ppid = getppid(); @@ -160,20 +159,16 @@ static int ptrace_child(void *arg) _exit(ret); } -static int start_ptraced_child(void **stack_out) +static int start_ptraced_child(void) { - void *stack; - unsigned long sp; int pid, n, status; - stack = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE | PROT_EXEC, - MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); - if(stack == MAP_FAILED) - panic("check_ptrace : mmap failed, errno = %d", errno); - sp = (unsigned long) stack + PAGE_SIZE - sizeof(void *); - pid = clone(ptrace_child, (void *) sp, SIGCHLD, NULL); + pid = fork(); + if(pid == 0) + ptrace_child(); + if(pid < 0) - panic("check_ptrace : clone failed, errno = %d", errno); + panic("check_ptrace : fork failed, errno = %d", errno); CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED)); if(n < 0) panic("check_ptrace : wait failed, errno = %d", errno); @@ -181,7 +176,6 @@ static int start_ptraced_child(void **stack_out) panic("check_ptrace : expected SIGSTOP, got status = %d", status); - *stack_out = stack; return(pid); } @@ -189,12 +183,12 @@ static int start_ptraced_child(void **stack_out) * just avoid using sysemu, not panic, but only if SYSEMU features are broken. * So only for SYSEMU features we test mustpanic, while normal host features * must work anyway!*/ -static int stop_ptraced_child(int pid, void *stack, int exitcode, int mustpanic) +static int stop_ptraced_child(int pid, int exitcode, int mustexit) { int status, n, ret = 0; if(ptrace(PTRACE_CONT, pid, 0, 0) < 0) - panic("check_ptrace : ptrace failed, errno = %d", errno); + panic("stop_ptraced_child : ptrace failed, errno = %d", errno); CATCH_EINTR(n = waitpid(pid, &status, 0)); if(!WIFEXITED(status) || (WEXITSTATUS(status) != exitcode)) { int exit_with = WEXITSTATUS(status); @@ -205,15 +199,13 @@ static int stop_ptraced_child(int pid, void *stack, int exitcode, int mustpanic) printk("check_ptrace : child exited with exitcode %d, while " "expecting %d; status 0x%x", exit_with, exitcode, status); - if (mustpanic) + if (mustexit) panic("\n"); else printk("\n"); ret = -1; } - if(munmap(stack, PAGE_SIZE) < 0) - panic("check_ptrace : munmap failed, errno = %d", errno); return ret; } @@ -235,12 +227,11 @@ __uml_setup("nosysemu", nosysemu_cmd_param, static void __init check_sysemu(void) { - void *stack; int pid, syscall, n, status, count=0; printk("Checking syscall emulation patch for ptrace..."); sysemu_supported = 0; - pid = start_ptraced_child(&stack); + pid = start_ptraced_child(); if(ptrace(PTRACE_SYSEMU, pid, 0, 0) < 0) goto fail; @@ -258,7 +249,7 @@ static void __init check_sysemu(void) panic("check_sysemu : failed to modify system " "call return, errno = %d", errno); - if (stop_ptraced_child(pid, stack, 0, 0) < 0) + if (stop_ptraced_child(pid, 0, 0) < 0) goto fail_stopped; sysemu_supported = 1; @@ -266,7 +257,7 @@ static void __init check_sysemu(void) set_using_sysemu(!force_sysemu_disabled); printk("Checking advanced syscall emulation patch for ptrace..."); - pid = start_ptraced_child(&stack); + pid = start_ptraced_child(); while(1){ count++; if(ptrace(PTRACE_SYSEMU_SINGLESTEP, pid, 0, 0) < 0) @@ -291,7 +282,7 @@ static void __init check_sysemu(void) break; } } - if (stop_ptraced_child(pid, stack, 0, 0) < 0) + if (stop_ptraced_child(pid, 0, 0) < 0) goto fail_stopped; sysemu_supported = 2; @@ -302,18 +293,17 @@ static void __init check_sysemu(void) return; fail: - stop_ptraced_child(pid, stack, 1, 0); + stop_ptraced_child(pid, 1, 0); fail_stopped: printk("missing\n"); } void __init check_ptrace(void) { - void *stack; int pid, syscall, n, status; printk("Checking that ptrace can change system call numbers..."); - pid = start_ptraced_child(&stack); + pid = start_ptraced_child(); if (ptrace(PTRACE_OLDSETOPTIONS, pid, 0, (void *)PTRACE_O_TRACESYSGOOD) < 0) panic("check_ptrace: PTRACE_SETOPTIONS failed, errno = %d", errno); @@ -340,7 +330,7 @@ void __init check_ptrace(void) break; } } - stop_ptraced_child(pid, stack, 0, 1); + stop_ptraced_child(pid, 0, 1); printk("OK\n"); check_sysemu(); } @@ -372,11 +362,10 @@ void forward_pending_sigio(int target) static inline int check_skas3_ptrace_support(void) { struct ptrace_faultinfo fi; - void *stack; int pid, n, ret = 1; printf("Checking for the skas3 patch in the host..."); - pid = start_ptraced_child(&stack); + pid = start_ptraced_child(); n = ptrace(PTRACE_FAULTINFO, pid, 0, &fi); if (n < 0) { @@ -391,7 +380,7 @@ static inline int check_skas3_ptrace_support(void) } init_registers(pid); - stop_ptraced_child(pid, stack, 1, 1); + stop_ptraced_child(pid, 1, 1); return(ret); } diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c index 418427107b29..8736d098f0ee 100644 --- a/arch/um/kernel/um_arch.c +++ b/arch/um/kernel/um_arch.c @@ -26,7 +26,6 @@ #include "asm/setup.h" #include "ubd_user.h" #include "asm/current.h" -#include "asm/setup.h" #include "user_util.h" #include "kern_util.h" #include "kern.h" diff --git a/arch/um/scripts/Makefile.rules b/arch/um/scripts/Makefile.rules index 0b2491883d9c..98346c711493 100644 --- a/arch/um/scripts/Makefile.rules +++ b/arch/um/scripts/Makefile.rules @@ -14,7 +14,7 @@ quiet_cmd_make_link = SYMLINK $@ cmd_make_link = ln -sf $(srctree)/arch/$(SUBARCH)/$($(notdir $@)-dir)/$(notdir $@) $@ # this needs to be before the foreach, because targets does not accept -# complete paths like $(obj)/$(f). To make sure this works, use a := assignment, +# complete paths like $(obj)/$(f). To make sure this works, use a := assignment # or we will get $(obj)/$(f) in the "targets" value. # Also, this forces you to use the := syntax when assigning to targets. # Otherwise the line below will cause an infinite loop (if you don't know why, |