diff options
Diffstat (limited to 'arch')
37 files changed, 728 insertions, 456 deletions
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 7d7ca054c557..e58fab8aec5d 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -36,6 +36,8 @@ phy1 = &usb1_phy; ethernet0 = &cpsw_emac0; ethernet1 = &cpsw_emac1; + spi0 = &spi0; + spi1 = &spi1; }; cpus { diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 9d276af7c539..081fa68b6f98 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -388,6 +388,7 @@ pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; status = "okay"; + slaves = <1>; }; &davinci_mdio { @@ -402,11 +403,6 @@ phy-mode = "rmii"; }; -&cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; - phy-mode = "rmii"; -}; - &phy_sel { rmii-clock-ext; }; diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts index 9c9088c99cc4..60cb084a8d92 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts @@ -67,7 +67,10 @@ usb1: ohci@00400000 { num-ports = <3>; - atmel,vbus-gpio = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>; + atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */ + &pioA PIN_PA27 GPIO_ACTIVE_HIGH + 0 + >; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb_default>; status = "okay"; @@ -120,7 +123,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mikrobus2_uart>; atmel,use-dma-rx; - atmel-use-dma-tx; + atmel,use-dma-tx; status = "okay"; }; @@ -178,7 +181,7 @@ uart4: serial@fc00c000 { atmel,use-dma-rx; atmel,use-dma-tx; - pinctrl-name = "default"; + pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mikrobus1_uart>; status = "okay"; }; @@ -330,7 +333,7 @@ }; pinctrl_led_gpio_default: led_gpio_default { - pinmux = <PIN_PA27__GPIO>, + pinmux = <PIN_PA10__GPIO>, <PIN_PB1__GPIO>, <PIN_PA31__GPIO>; bias-pull-up; @@ -396,7 +399,7 @@ }; pinctrl_usb_default: usb_default { - pinmux = <PIN_PA10__GPIO>, + pinmux = <PIN_PA27__GPIO>, <PIN_PD19__GPIO>; bias-disable; }; @@ -520,17 +523,17 @@ red { label = "red"; - gpios = <&pioA PIN_PA27 GPIO_ACTIVE_LOW>; + gpios = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>; }; green { label = "green"; - gpios = <&pioA PIN_PB1 GPIO_ACTIVE_LOW>; + gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>; }; blue { label = "blue"; - gpios = <&pioA PIN_PA31 GPIO_ACTIVE_LOW>; + gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; }; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 67e72bc72e80..c75507922f7d 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -15,6 +15,13 @@ compatible = "ti,da850-evm", "ti,da850"; model = "DA850/AM1808/OMAP-L138 EVM"; + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + ethernet0 = ð0; + }; + soc@1c00000 { pmx_core: pinmux@14120 { status = "okay"; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index cf229dfabf61..e62b62875cba 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -1817,6 +1817,8 @@ clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ti,bit-shift = <24>; reg = <0x1868>; + assigned-clocks = <&mcasp3_ahclkx_mux>; + assigned-clock-parents = <&abe_24m_fclk>; }; mcasp3_aux_gfclk_mux: mcasp3_aux_gfclk_mux@1868 { diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 26c20e1167b9..4acd32a1c4ef 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -144,15 +144,6 @@ io-channel-names = "temp", "bsi", "vbat"; }; - rear_camera: camera@0 { - compatible = "linux,camera"; - - module { - model = "TCM8341MD"; - sensor = <&cam1>; - }; - }; - pwm9: dmtimer-pwm { compatible = "ti,omap-dmtimer-pwm"; #pwm-cells = <3>; @@ -189,10 +180,8 @@ clock-lanes = <1>; data-lanes = <0>; lane-polarity = <0 0>; - clock-inv = <0>; /* Select strobe = <1> for back camera, <0> for front camera */ strobe = <1>; - crc = <0>; }; }; }; diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index 97b1c2321ba9..293ecb957227 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -47,6 +47,7 @@ /dts-v1/; #include "stm32f429.dtsi" +#include "stm32f429-pinctrl.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> @@ -202,10 +203,8 @@ stmpe1600: stmpe1600@42 { compatible = "st,stmpe1600"; reg = <0x42>; - irq-gpio = <&gpioi 8 0>; - irq-trigger = <3>; interrupts = <8 3>; - interrupt-parent = <&exti>; + interrupt-parent = <&gpioi>; interrupt-controller; wakeup-source; diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi new file mode 100644 index 000000000000..7f3560c0211d --- /dev/null +++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi @@ -0,0 +1,343 @@ +/* + * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/pinctrl/stm32f429-pinfunc.h> +#include <dt-bindings/mfd/stm32f4-rcc.h> + +/ { + soc { + pinctrl: pin-controller { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x40020000 0x3000>; + interrupt-parent = <&exti>; + st,syscfg = <&syscfg 0x8>; + pins-are-numbered; + + gpioa: gpio@40020000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x400>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>; + st,bank-name = "GPIOA"; + }; + + gpiob: gpio@40020400 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x400 0x400>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>; + st,bank-name = "GPIOB"; + }; + + gpioc: gpio@40020800 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x800 0x400>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>; + st,bank-name = "GPIOC"; + }; + + gpiod: gpio@40020c00 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0xc00 0x400>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>; + st,bank-name = "GPIOD"; + }; + + gpioe: gpio@40021000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x400>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>; + st,bank-name = "GPIOE"; + }; + + gpiof: gpio@40021400 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1400 0x400>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>; + st,bank-name = "GPIOF"; + }; + + gpiog: gpio@40021800 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1800 0x400>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>; + st,bank-name = "GPIOG"; + }; + + gpioh: gpio@40021c00 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1c00 0x400>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>; + st,bank-name = "GPIOH"; + }; + + gpioi: gpio@40022000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x400>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>; + st,bank-name = "GPIOI"; + }; + + gpioj: gpio@40022400 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2400 0x400>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>; + st,bank-name = "GPIOJ"; + }; + + gpiok: gpio@40022800 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2800 0x400>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>; + st,bank-name = "GPIOK"; + }; + + usart1_pins_a: usart1@0 { + pins1 { + pinmux = <STM32F429_PA9_FUNC_USART1_TX>; + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32F429_PA10_FUNC_USART1_RX>; + bias-disable; + }; + }; + + usart3_pins_a: usart3@0 { + pins1 { + pinmux = <STM32F429_PB10_FUNC_USART3_TX>; + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32F429_PB11_FUNC_USART3_RX>; + bias-disable; + }; + }; + + usbotg_fs_pins_a: usbotg_fs@0 { + pins { + pinmux = <STM32F429_PA10_FUNC_OTG_FS_ID>, + <STM32F429_PA11_FUNC_OTG_FS_DM>, + <STM32F429_PA12_FUNC_OTG_FS_DP>; + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; + + usbotg_fs_pins_b: usbotg_fs@1 { + pins { + pinmux = <STM32F429_PB12_FUNC_OTG_HS_ID>, + <STM32F429_PB14_FUNC_OTG_HS_DM>, + <STM32F429_PB15_FUNC_OTG_HS_DP>; + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; + + usbotg_hs_pins_a: usbotg_hs@0 { + pins { + pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>, + <STM32F429_PI11_FUNC_OTG_HS_ULPI_DIR>, + <STM32F429_PC0_FUNC_OTG_HS_ULPI_STP>, + <STM32F429_PA5_FUNC_OTG_HS_ULPI_CK>, + <STM32F429_PA3_FUNC_OTG_HS_ULPI_D0>, + <STM32F429_PB0_FUNC_OTG_HS_ULPI_D1>, + <STM32F429_PB1_FUNC_OTG_HS_ULPI_D2>, + <STM32F429_PB10_FUNC_OTG_HS_ULPI_D3>, + <STM32F429_PB11_FUNC_OTG_HS_ULPI_D4>, + <STM32F429_PB12_FUNC_OTG_HS_ULPI_D5>, + <STM32F429_PB13_FUNC_OTG_HS_ULPI_D6>, + <STM32F429_PB5_FUNC_OTG_HS_ULPI_D7>; + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; + + ethernet_mii: mii@0 { + pins { + pinmux = <STM32F429_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>, + <STM32F429_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>, + <STM32F429_PC2_FUNC_ETH_MII_TXD2>, + <STM32F429_PB8_FUNC_ETH_MII_TXD3>, + <STM32F429_PC3_FUNC_ETH_MII_TX_CLK>, + <STM32F429_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>, + <STM32F429_PA2_FUNC_ETH_MDIO>, + <STM32F429_PC1_FUNC_ETH_MDC>, + <STM32F429_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>, + <STM32F429_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>, + <STM32F429_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>, + <STM32F429_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>, + <STM32F429_PH6_FUNC_ETH_MII_RXD2>, + <STM32F429_PH7_FUNC_ETH_MII_RXD3>; + slew-rate = <2>; + }; + }; + + adc3_in8_pin: adc@200 { + pins { + pinmux = <STM32F429_PF10_FUNC_ANALOG>; + }; + }; + + pwm1_pins: pwm@1 { + pins { + pinmux = <STM32F429_PA8_FUNC_TIM1_CH1>, + <STM32F429_PB13_FUNC_TIM1_CH1N>, + <STM32F429_PB12_FUNC_TIM1_BKIN>; + }; + }; + + pwm3_pins: pwm@3 { + pins { + pinmux = <STM32F429_PB4_FUNC_TIM3_CH1>, + <STM32F429_PB5_FUNC_TIM3_CH2>; + }; + }; + + i2c1_pins: i2c1@0 { + pins { + pinmux = <STM32F429_PB9_FUNC_I2C1_SDA>, + <STM32F429_PB6_FUNC_I2C1_SCL>; + bias-disable; + drive-open-drain; + slew-rate = <3>; + }; + }; + + ltdc_pins: ltdc@0 { + pins { + pinmux = <STM32F429_PI12_FUNC_LCD_HSYNC>, + <STM32F429_PI13_FUNC_LCD_VSYNC>, + <STM32F429_PI14_FUNC_LCD_CLK>, + <STM32F429_PI15_FUNC_LCD_R0>, + <STM32F429_PJ0_FUNC_LCD_R1>, + <STM32F429_PJ1_FUNC_LCD_R2>, + <STM32F429_PJ2_FUNC_LCD_R3>, + <STM32F429_PJ3_FUNC_LCD_R4>, + <STM32F429_PJ4_FUNC_LCD_R5>, + <STM32F429_PJ5_FUNC_LCD_R6>, + <STM32F429_PJ6_FUNC_LCD_R7>, + <STM32F429_PJ7_FUNC_LCD_G0>, + <STM32F429_PJ8_FUNC_LCD_G1>, + <STM32F429_PJ9_FUNC_LCD_G2>, + <STM32F429_PJ10_FUNC_LCD_G3>, + <STM32F429_PJ11_FUNC_LCD_G4>, + <STM32F429_PJ12_FUNC_LCD_B0>, + <STM32F429_PJ13_FUNC_LCD_B1>, + <STM32F429_PJ14_FUNC_LCD_B2>, + <STM32F429_PJ15_FUNC_LCD_B3>, + <STM32F429_PK0_FUNC_LCD_G5>, + <STM32F429_PK1_FUNC_LCD_G6>, + <STM32F429_PK2_FUNC_LCD_G7>, + <STM32F429_PK3_FUNC_LCD_B4>, + <STM32F429_PK4_FUNC_LCD_B5>, + <STM32F429_PK5_FUNC_LCD_B6>, + <STM32F429_PK6_FUNC_LCD_B7>, + <STM32F429_PK7_FUNC_LCD_DE>; + slew-rate = <2>; + }; + }; + + dcmi_pins: dcmi@0 { + pins { + pinmux = <STM32F429_PA4_FUNC_DCMI_HSYNC>, + <STM32F429_PB7_FUNC_DCMI_VSYNC>, + <STM32F429_PA6_FUNC_DCMI_PIXCLK>, + <STM32F429_PC6_FUNC_DCMI_D0>, + <STM32F429_PC7_FUNC_DCMI_D1>, + <STM32F429_PC8_FUNC_DCMI_D2>, + <STM32F429_PC9_FUNC_DCMI_D3>, + <STM32F429_PC11_FUNC_DCMI_D4>, + <STM32F429_PD3_FUNC_DCMI_D5>, + <STM32F429_PB8_FUNC_DCMI_D6>, + <STM32F429_PE6_FUNC_DCMI_D7>, + <STM32F429_PC10_FUNC_DCMI_D8>, + <STM32F429_PC12_FUNC_DCMI_D9>, + <STM32F429_PD6_FUNC_DCMI_D10>, + <STM32F429_PD2_FUNC_DCMI_D11>; + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts index c66d617e4245..5ceb2cf3777f 100644 --- a/arch/arm/boot/dts/stm32f429-disco.dts +++ b/arch/arm/boot/dts/stm32f429-disco.dts @@ -47,6 +47,7 @@ /dts-v1/; #include "stm32f429.dtsi" +#include "stm32f429-pinctrl.dtsi" #include <dt-bindings/input/input.h> / { diff --git a/arch/arm/boot/dts/stm32f429-pinctrl.dtsi b/arch/arm/boot/dts/stm32f429-pinctrl.dtsi new file mode 100644 index 000000000000..3e7a17d9112e --- /dev/null +++ b/arch/arm/boot/dts/stm32f429-pinctrl.dtsi @@ -0,0 +1,95 @@ +/* + * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "stm32f4-pinctrl.dtsi" + +/ { + soc { + pinctrl: pin-controller { + compatible = "st,stm32f429-pinctrl"; + + gpioa: gpio@40020000 { + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@40020400 { + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@40020800 { + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@40020c00 { + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@40021000 { + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@40021400 { + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@40021800 { + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@40021c00 { + gpio-ranges = <&pinctrl 0 112 16>; + }; + + gpioi: gpio@40022000 { + gpio-ranges = <&pinctrl 0 128 16>; + }; + + gpioj: gpio@40022400 { + gpio-ranges = <&pinctrl 0 144 16>; + }; + + gpiok: gpio@40022800 { + gpio-ranges = <&pinctrl 0 160 8>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index dd7e99b1f43b..5b36eb114ddc 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -47,7 +47,6 @@ #include "skeleton.dtsi" #include "armv7-m.dtsi" -#include <dt-bindings/pinctrl/stm32f429-pinfunc.h> #include <dt-bindings/clock/stm32fx-clock.h> #include <dt-bindings/mfd/stm32f4-rcc.h> @@ -591,302 +590,6 @@ status = "disabled"; }; - pinctrl: pin-controller { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stm32f429-pinctrl"; - ranges = <0 0x40020000 0x3000>; - interrupt-parent = <&exti>; - st,syscfg = <&syscfg 0x8>; - pins-are-numbered; - - gpioa: gpio@40020000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x0 0x400>; - clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>; - st,bank-name = "GPIOA"; - }; - - gpiob: gpio@40020400 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x400 0x400>; - clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>; - st,bank-name = "GPIOB"; - }; - - gpioc: gpio@40020800 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x800 0x400>; - clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>; - st,bank-name = "GPIOC"; - }; - - gpiod: gpio@40020c00 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0xc00 0x400>; - clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>; - st,bank-name = "GPIOD"; - }; - - gpioe: gpio@40021000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1000 0x400>; - clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>; - st,bank-name = "GPIOE"; - }; - - gpiof: gpio@40021400 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1400 0x400>; - clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>; - st,bank-name = "GPIOF"; - }; - - gpiog: gpio@40021800 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1800 0x400>; - clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>; - st,bank-name = "GPIOG"; - }; - - gpioh: gpio@40021c00 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1c00 0x400>; - clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>; - st,bank-name = "GPIOH"; - }; - - gpioi: gpio@40022000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x2000 0x400>; - clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>; - st,bank-name = "GPIOI"; - }; - - gpioj: gpio@40022400 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x2400 0x400>; - clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>; - st,bank-name = "GPIOJ"; - }; - - gpiok: gpio@40022800 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x2800 0x400>; - clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>; - st,bank-name = "GPIOK"; - }; - - usart1_pins_a: usart1@0 { - pins1 { - pinmux = <STM32F429_PA9_FUNC_USART1_TX>; - bias-disable; - drive-push-pull; - slew-rate = <0>; - }; - pins2 { - pinmux = <STM32F429_PA10_FUNC_USART1_RX>; - bias-disable; - }; - }; - - usart3_pins_a: usart3@0 { - pins1 { - pinmux = <STM32F429_PB10_FUNC_USART3_TX>; - bias-disable; - drive-push-pull; - slew-rate = <0>; - }; - pins2 { - pinmux = <STM32F429_PB11_FUNC_USART3_RX>; - bias-disable; - }; - }; - - usbotg_fs_pins_a: usbotg_fs@0 { - pins { - pinmux = <STM32F429_PA10_FUNC_OTG_FS_ID>, - <STM32F429_PA11_FUNC_OTG_FS_DM>, - <STM32F429_PA12_FUNC_OTG_FS_DP>; - bias-disable; - drive-push-pull; - slew-rate = <2>; - }; - }; - - usbotg_fs_pins_b: usbotg_fs@1 { - pins { - pinmux = <STM32F429_PB12_FUNC_OTG_HS_ID>, - <STM32F429_PB14_FUNC_OTG_HS_DM>, - <STM32F429_PB15_FUNC_OTG_HS_DP>; - bias-disable; - drive-push-pull; - slew-rate = <2>; - }; - }; - - usbotg_hs_pins_a: usbotg_hs@0 { - pins { - pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>, - <STM32F429_PI11_FUNC_OTG_HS_ULPI_DIR>, - <STM32F429_PC0_FUNC_OTG_HS_ULPI_STP>, - <STM32F429_PA5_FUNC_OTG_HS_ULPI_CK>, - <STM32F429_PA3_FUNC_OTG_HS_ULPI_D0>, - <STM32F429_PB0_FUNC_OTG_HS_ULPI_D1>, - <STM32F429_PB1_FUNC_OTG_HS_ULPI_D2>, - <STM32F429_PB10_FUNC_OTG_HS_ULPI_D3>, - <STM32F429_PB11_FUNC_OTG_HS_ULPI_D4>, - <STM32F429_PB12_FUNC_OTG_HS_ULPI_D5>, - <STM32F429_PB13_FUNC_OTG_HS_ULPI_D6>, - <STM32F429_PB5_FUNC_OTG_HS_ULPI_D7>; - bias-disable; - drive-push-pull; - slew-rate = <2>; - }; - }; - - ethernet_mii: mii@0 { - pins { - pinmux = <STM32F429_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>, - <STM32F429_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>, - <STM32F429_PC2_FUNC_ETH_MII_TXD2>, - <STM32F429_PB8_FUNC_ETH_MII_TXD3>, - <STM32F429_PC3_FUNC_ETH_MII_TX_CLK>, - <STM32F429_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>, - <STM32F429_PA2_FUNC_ETH_MDIO>, - <STM32F429_PC1_FUNC_ETH_MDC>, - <STM32F429_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>, - <STM32F429_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>, - <STM32F429_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>, - <STM32F429_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>, - <STM32F429_PH6_FUNC_ETH_MII_RXD2>, - <STM32F429_PH7_FUNC_ETH_MII_RXD3>; - slew-rate = <2>; - }; - }; - - adc3_in8_pin: adc@200 { - pins { - pinmux = <STM32F429_PF10_FUNC_ANALOG>; - }; - }; - - pwm1_pins: pwm@1 { - pins { - pinmux = <STM32F429_PA8_FUNC_TIM1_CH1>, - <STM32F429_PB13_FUNC_TIM1_CH1N>, - <STM32F429_PB12_FUNC_TIM1_BKIN>; - }; - }; - - pwm3_pins: pwm@3 { - pins { - pinmux = <STM32F429_PB4_FUNC_TIM3_CH1>, - <STM32F429_PB5_FUNC_TIM3_CH2>; - }; - }; - - i2c1_pins: i2c1@0 { - pins { - pinmux = <STM32F429_PB9_FUNC_I2C1_SDA>, - <STM32F429_PB6_FUNC_I2C1_SCL>; - bias-disable; - drive-open-drain; - slew-rate = <3>; - }; - }; - - ltdc_pins: ltdc@0 { - pins { - pinmux = <STM32F429_PI12_FUNC_LCD_HSYNC>, - <STM32F429_PI13_FUNC_LCD_VSYNC>, - <STM32F429_PI14_FUNC_LCD_CLK>, - <STM32F429_PI15_FUNC_LCD_R0>, - <STM32F429_PJ0_FUNC_LCD_R1>, - <STM32F429_PJ1_FUNC_LCD_R2>, - <STM32F429_PJ2_FUNC_LCD_R3>, - <STM32F429_PJ3_FUNC_LCD_R4>, - <STM32F429_PJ4_FUNC_LCD_R5>, - <STM32F429_PJ5_FUNC_LCD_R6>, - <STM32F429_PJ6_FUNC_LCD_R7>, - <STM32F429_PJ7_FUNC_LCD_G0>, - <STM32F429_PJ8_FUNC_LCD_G1>, - <STM32F429_PJ9_FUNC_LCD_G2>, - <STM32F429_PJ10_FUNC_LCD_G3>, - <STM32F429_PJ11_FUNC_LCD_G4>, - <STM32F429_PJ12_FUNC_LCD_B0>, - <STM32F429_PJ13_FUNC_LCD_B1>, - <STM32F429_PJ14_FUNC_LCD_B2>, - <STM32F429_PJ15_FUNC_LCD_B3>, - <STM32F429_PK0_FUNC_LCD_G5>, - <STM32F429_PK1_FUNC_LCD_G6>, - <STM32F429_PK2_FUNC_LCD_G7>, - <STM32F429_PK3_FUNC_LCD_B4>, - <STM32F429_PK4_FUNC_LCD_B5>, - <STM32F429_PK5_FUNC_LCD_B6>, - <STM32F429_PK6_FUNC_LCD_B7>, - <STM32F429_PK7_FUNC_LCD_DE>; - slew-rate = <2>; - }; - }; - - dcmi_pins: dcmi@0 { - pins { - pinmux = <STM32F429_PA4_FUNC_DCMI_HSYNC>, - <STM32F429_PB7_FUNC_DCMI_VSYNC>, - <STM32F429_PA6_FUNC_DCMI_PIXCLK>, - <STM32F429_PC6_FUNC_DCMI_D0>, - <STM32F429_PC7_FUNC_DCMI_D1>, - <STM32F429_PC8_FUNC_DCMI_D2>, - <STM32F429_PC9_FUNC_DCMI_D3>, - <STM32F429_PC11_FUNC_DCMI_D4>, - <STM32F429_PD3_FUNC_DCMI_D5>, - <STM32F429_PB8_FUNC_DCMI_D6>, - <STM32F429_PE6_FUNC_DCMI_D7>, - <STM32F429_PC10_FUNC_DCMI_D8>, - <STM32F429_PC12_FUNC_DCMI_D9>, - <STM32F429_PD6_FUNC_DCMI_D10>, - <STM32F429_PD2_FUNC_DCMI_D11>; - bias-disable; - drive-push-pull; - slew-rate = <3>; - }; - }; - }; - crc: crc@40023000 { compatible = "st,stm32f4-crc"; reg = <0x40023000 0x400>; diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts index 6ae1f037f3f0..c18acbe4cf4e 100644 --- a/arch/arm/boot/dts/stm32f469-disco.dts +++ b/arch/arm/boot/dts/stm32f469-disco.dts @@ -47,6 +47,7 @@ /dts-v1/; #include "stm32f429.dtsi" +#include "stm32f469-pinctrl.dtsi" / { model = "STMicroelectronics STM32F469i-DISCO board"; diff --git a/arch/arm/boot/dts/stm32f469-pinctrl.dtsi b/arch/arm/boot/dts/stm32f469-pinctrl.dtsi new file mode 100644 index 000000000000..fff542662eea --- /dev/null +++ b/arch/arm/boot/dts/stm32f469-pinctrl.dtsi @@ -0,0 +1,96 @@ +/* + * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "stm32f4-pinctrl.dtsi" + +/ { + soc { + pinctrl: pin-controller { + compatible = "st,stm32f469-pinctrl"; + + gpioa: gpio@40020000 { + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@40020400 { + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@40020800 { + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@40020c00 { + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@40021000 { + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@40021400 { + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@40021800 { + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@40021c00 { + gpio-ranges = <&pinctrl 0 112 16>; + }; + + gpioi: gpio@40022000 { + gpio-ranges = <&pinctrl 0 128 16>; + }; + + gpioj: gpio@40022400 { + gpio-ranges = <&pinctrl 0 144 6>, + <&pinctrl 12 156 4>; + }; + + gpiok: gpio@40022800 { + gpio-ranges = <&pinctrl 3 163 5>; + }; + }; + }; +}; diff --git a/arch/arm/configs/gemini_defconfig b/arch/arm/configs/gemini_defconfig index d2d75fa664a6..2a63fa10c813 100644 --- a/arch/arm/configs/gemini_defconfig +++ b/arch/arm/configs/gemini_defconfig @@ -32,6 +32,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384 CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_ATA=y +CONFIG_PATA_FTIDE010=y CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set @@ -55,8 +56,8 @@ CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_GEMINI=y CONFIG_DMADEVICES=y +CONFIG_AMBA_PL08X=y # CONFIG_DNOTIFY is not set CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig index 64e3a2a8cede..d5e1370ec303 100644 --- a/arch/arm/configs/pxa_defconfig +++ b/arch/arm/configs/pxa_defconfig @@ -471,7 +471,7 @@ CONFIG_LCD_PLATFORM=m CONFIG_LCD_TOSA=m CONFIG_BACKLIGHT_PWM=m CONFIG_BACKLIGHT_TOSA=m -CONFIG_FRAMEBUFFER_CONSOLE=m +CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_LOGO=y CONFIG_SOUND=m diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig index 44d4fa57ba0a..070e5074f1ee 100644 --- a/arch/arm/configs/viper_defconfig +++ b/arch/arm/configs/viper_defconfig @@ -113,7 +113,7 @@ CONFIG_FB_PXA_PARAMETERS=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_PWM=m # CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=m +CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y CONFIG_SOUND=m CONFIG_SND=m diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig index 8d4c0c926c34..09e7050d5653 100644 --- a/arch/arm/configs/zeus_defconfig +++ b/arch/arm/configs/zeus_defconfig @@ -112,7 +112,7 @@ CONFIG_FB_PXA=m CONFIG_FB_PXA_PARAMETERS=y CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=m +CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y CONFIG_SOUND=m CONFIG_SND=m diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 5036f996e694..849014c01cf4 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -533,8 +533,8 @@ static void __init at91_pm_backup_init(void) } pm_bu->suspended = 0; - pm_bu->canary = virt_to_phys(&canary); - pm_bu->resume = virt_to_phys(cpu_resume); + pm_bu->canary = __pa_symbol(&canary); + pm_bu->resume = __pa_symbol(cpu_resume); return; diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 5b614388d72f..6d28aa20a7d3 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -58,10 +58,10 @@ void omap_hsmmc_late_init(struct omap2_hsmmc_info *c) struct platform_device *pdev; int res; - if (omap_hsmmc_done != 1) + if (omap_hsmmc_done) return; - omap_hsmmc_done++; + omap_hsmmc_done = 1; for (; c->mmc; c++) { pdev = c->pdev; diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index f040244c57e7..2f4f7002f38d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -839,6 +839,7 @@ static struct omap_hwmod dra7xx_gpio1_hwmod = { .name = "gpio1", .class = &dra7xx_gpio_hwmod_class, .clkdm_name = "wkupaon_clkdm", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .main_clk = "wkupaon_iclk_mux", .prcm = { .omap4 = { diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index c89010e56488..4157987f4a3d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -168,7 +168,8 @@ &sd_emmc_a { status = "okay"; pinctrl-0 = <&sdio_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; #address-cells = <1>; #size-cells = <0>; @@ -194,7 +195,8 @@ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; @@ -212,10 +214,10 @@ &sd_emmc_c { status = "okay"; pinctrl-0 = <&emmc_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <8>; - cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <200000000>; non-removable; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts index 9697a7a79464..4b17a76959b2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts @@ -107,6 +107,9 @@ states = <3300000 0>, <1800000 1>; + + regulator-settling-time-up-us = <100>; + regulator-settling-time-down-us = <5000>; }; wifi_32k: wifi-32k { @@ -250,7 +253,8 @@ &sd_emmc_a { status = "okay"; pinctrl-0 = <&sdio_pins>, <&sdio_irq_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; #address-cells = <1>; #size-cells = <0>; @@ -276,11 +280,16 @@ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + max-frequency = <200000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; @@ -294,10 +303,10 @@ &sd_emmc_c { status = "disabled"; pinctrl-0 = <&emmc_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <8>; - cap-sd-highspeed; max-frequency = <200000000>; non-removable; disable-wp; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index 9c59c3c6d1b6..38dfdde5c147 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts @@ -51,7 +51,7 @@ / { compatible = "nexbox,a95x", "amlogic,meson-gxbb"; model = "NEXBOX A95X"; - + aliases { serial0 = &uart_AO; }; @@ -232,7 +232,8 @@ &sd_emmc_a { status = "okay"; pinctrl-0 = <&sdio_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; #address-cells = <1>; #size-cells = <0>; @@ -253,7 +254,8 @@ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; @@ -271,10 +273,10 @@ &sd_emmc_c { status = "okay"; pinctrl-0 = <&emmc_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <8>; - cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <200000000>; non-removable; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index d147c853ab05..1ffa1c238a72 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -50,7 +50,7 @@ / { compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb"; model = "Hardkernel ODROID-C2"; - + aliases { serial0 = &uart_AO; }; @@ -253,7 +253,8 @@ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; @@ -271,10 +272,10 @@ &sd_emmc_c { status = "okay"; pinctrl-0 = <&emmc_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <8>; - cap-sd-highspeed; max-frequency = <200000000>; non-removable; disable-wp; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index 81ffc689a5bf..23c08c3afd0a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi @@ -194,7 +194,8 @@ &sd_emmc_a { status = "okay"; pinctrl-0 = <&sdio_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; #address-cells = <1>; #size-cells = <0>; @@ -220,10 +221,14 @@ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; max-frequency = <100000000>; disable-wp; @@ -238,10 +243,10 @@ &sd_emmc_c { status = "okay"; pinctrl-0 = <&emmc_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <8>; - cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <200000000>; non-removable; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi index 346753fb6324..f2bc6dea1fc6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi @@ -155,7 +155,8 @@ &sd_emmc_a { status = "okay"; pinctrl-0 = <&sdio_pins &sdio_irq_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; #address-cells = <1>; #size-cells = <0>; @@ -181,7 +182,8 @@ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; @@ -198,10 +200,10 @@ &sd_emmc_c { status = "okay"; pinctrl-0 = <&emmc_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <8>; - cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <200000000>; non-removable; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 52f1687e7a09..af834cdbba79 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -392,6 +392,17 @@ }; }; + emmc_clk_gate_pins: emmc_clk_gate { + mux { + groups = "BOOT_8"; + function = "gpio_periphs"; + }; + cfg-pull-down { + pins = "BOOT_8"; + bias-pull-down; + }; + }; + nor_pins: nor { mux { groups = "nor_d", @@ -430,6 +441,17 @@ }; }; + sdcard_clk_gate_pins: sdcard_clk_gate { + mux { + groups = "CARD_2"; + function = "gpio_periphs"; + }; + cfg-pull-down { + pins = "CARD_2"; + bias-pull-down; + }; + }; + sdio_pins: sdio { mux { groups = "sdio_d0", @@ -442,6 +464,17 @@ }; }; + sdio_clk_gate_pins: sdio_clk_gate { + mux { + groups = "GPIOX_4"; + function = "gpio_periphs"; + }; + cfg-pull-down { + pins = "GPIOX_4"; + bias-pull-down; + }; + }; + sdio_irq_pins: sdio_irq { mux { groups = "sdio_irq"; @@ -661,21 +694,21 @@ &sd_emmc_a { clocks = <&clkc CLKID_SD_EMMC_A>, - <&xtal>, + <&clkc CLKID_SD_EMMC_A_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; }; &sd_emmc_b { clocks = <&clkc CLKID_SD_EMMC_B>, - <&xtal>, + <&clkc CLKID_SD_EMMC_B_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; }; &sd_emmc_c { clocks = <&clkc CLKID_SD_EMMC_C>, - <&xtal>, + <&clkc CLKID_SD_EMMC_C_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts index 2a5804ce7f4b..977b4240f3c1 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts @@ -123,7 +123,8 @@ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; @@ -141,10 +142,10 @@ &sd_emmc_c { status = "okay"; pinctrl-0 = <&emmc_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <8>; - cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <100000000>; non-removable; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index 69ca14ac10fa..64c54c92e214 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -91,6 +91,9 @@ states = <3300000 0>, <1800000 1>; + + regulator-settling-time-up-us = <200>; + regulator-settling-time-down-us = <50000>; }; vddio_boot: regulator-vddio_boot { @@ -197,10 +200,14 @@ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; max-frequency = <100000000>; disable-wp; @@ -215,10 +222,12 @@ &sd_emmc_c { status = "okay"; pinctrl-0 = <&emmc_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-3_3v; max-frequency = <50000000>; non-removable; disable-wp; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts index 4c2ac7650fcd..1b8f32867aa1 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts @@ -189,7 +189,8 @@ &sd_emmc_a { status = "okay"; pinctrl-0 = <&sdio_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; #address-cells = <1>; #size-cells = <0>; @@ -210,7 +211,8 @@ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; @@ -228,10 +230,10 @@ &sd_emmc_c { status = "okay"; pinctrl-0 = <&emmc_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <8>; - cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <200000000>; non-removable; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi index f3eea8e89d12..129af9068814 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi @@ -95,7 +95,8 @@ &sd_emmc_a { status = "okay"; pinctrl-0 = <&sdio_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; #address-cells = <1>; #size-cells = <0>; @@ -116,7 +117,8 @@ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; @@ -134,10 +136,10 @@ &sd_emmc_c { status = "okay"; pinctrl-0 = <&emmc_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <8>; - cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <200000000>; non-removable; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index d6876e64979e..d8dd3298b15c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -281,6 +281,17 @@ }; }; + emmc_clk_gate_pins: emmc_clk_gate { + mux { + groups = "BOOT_8"; + function = "gpio_periphs"; + }; + cfg-pull-down { + pins = "BOOT_8"; + bias-pull-down; + }; + }; + nor_pins: nor { mux { groups = "nor_d", @@ -319,6 +330,17 @@ }; }; + sdcard_clk_gate_pins: sdcard_clk_gate { + mux { + groups = "CARD_2"; + function = "gpio_periphs"; + }; + cfg-pull-down { + pins = "CARD_2"; + bias-pull-down; + }; + }; + sdio_pins: sdio { mux { groups = "sdio_d0", @@ -331,6 +353,17 @@ }; }; + sdio_clk_gate_pins: sdio_clk_gate { + mux { + groups = "GPIOX_4"; + function = "gpio_periphs"; + }; + cfg-pull-down { + pins = "GPIOX_4"; + bias-pull-down; + }; + }; + sdio_irq_pins: sdio_irq { mux { groups = "sdio_irq"; @@ -603,21 +636,21 @@ &sd_emmc_a { clocks = <&clkc CLKID_SD_EMMC_A>, - <&xtal>, + <&clkc CLKID_SD_EMMC_A_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; }; &sd_emmc_b { clocks = <&clkc CLKID_SD_EMMC_B>, - <&xtal>, + <&clkc CLKID_SD_EMMC_B_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; }; &sd_emmc_c { clocks = <&clkc CLKID_SD_EMMC_C>, - <&xtal>, + <&clkc CLKID_SD_EMMC_C_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index 9b10c5f4f8c0..22c697732f66 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts @@ -175,7 +175,8 @@ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; @@ -193,10 +194,10 @@ &sd_emmc_c { status = "okay"; pinctrl-0 = <&emmc_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <8>; - cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <200000000>; non-removable; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts index 08f1dd69b679..470f72bb863c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts @@ -220,7 +220,6 @@ pinctrl-names = "default"; bus-width = <8>; - cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <200000000>; non-removable; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index 4d360713ed12..30d48ecf46e0 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -254,7 +254,7 @@ ap_syscon: system-controller@6f4000 { compatible = "syscon", "simple-mfd"; - reg = <0x6f4000 0x1000>; + reg = <0x6f4000 0x2000>; ap_clk: clock { compatible = "marvell,ap806-clock"; @@ -265,7 +265,7 @@ compatible = "marvell,ap806-pinctrl"; }; - ap_gpio: gpio { + ap_gpio: gpio@1040 { compatible = "marvell,armada-8k-gpio"; offset = <0x1040>; ngpios = <20>; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index e0518b4bc6c2..19fbaa5e7bdd 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -113,8 +113,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x0>; enable-method = "psci"; - clocks = <&cru ARMCLKL>; - operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; /* min followed by max */ }; @@ -123,8 +122,6 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x1>; enable-method = "psci"; - clocks = <&cru ARMCLKL>; - operating-points-v2 = <&cluster0_opp>; }; cpu_l2: cpu@2 { @@ -132,8 +129,6 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x2>; enable-method = "psci"; - clocks = <&cru ARMCLKL>; - operating-points-v2 = <&cluster0_opp>; }; cpu_l3: cpu@3 { @@ -141,8 +136,6 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x3>; enable-method = "psci"; - clocks = <&cru ARMCLKL>; - operating-points-v2 = <&cluster0_opp>; }; cpu_b0: cpu@100 { @@ -150,8 +143,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x100>; enable-method = "psci"; - clocks = <&cru ARMCLKB>; - operating-points-v2 = <&cluster1_opp>; + #cooling-cells = <2>; /* min followed by max */ }; @@ -160,8 +152,6 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x101>; enable-method = "psci"; - clocks = <&cru ARMCLKB>; - operating-points-v2 = <&cluster1_opp>; }; cpu_b2: cpu@102 { @@ -169,8 +159,6 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x102>; enable-method = "psci"; - clocks = <&cru ARMCLKB>; - operating-points-v2 = <&cluster1_opp>; }; cpu_b3: cpu@103 { @@ -178,62 +166,6 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x103>; enable-method = "psci"; - clocks = <&cru ARMCLKB>; - operating-points-v2 = <&cluster1_opp>; - }; - }; - - cluster0_opp: opp-table0 { - compatible = "operating-points-v2"; - opp-shared; - - opp00 { - opp-hz = /bits/ 64 <312000000>; - opp-microvolt = <950000>; - clock-latency-ns = <40000>; - }; - opp01 { - opp-hz = /bits/ 64 <408000000>; - opp-microvolt = <950000>; - }; - opp02 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <950000>; - }; - opp03 { - opp-hz = /bits/ 64 <816000000>; - opp-microvolt = <1025000>; - }; - opp04 { - opp-hz = /bits/ 64 <1008000000>; - opp-microvolt = <1125000>; - }; - }; - - cluster1_opp: opp-table1 { - compatible = "operating-points-v2"; - opp-shared; - - opp00 { - opp-hz = /bits/ 64 <312000000>; - opp-microvolt = <950000>; - clock-latency-ns = <40000>; - }; - opp01 { - opp-hz = /bits/ 64 <408000000>; - opp-microvolt = <950000>; - }; - opp02 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <950000>; - }; - opp03 { - opp-hz = /bits/ 64 <816000000>; - opp-microvolt = <975000>; - }; - opp04 { - opp-hz = /bits/ 64 <1008000000>; - opp-microvolt = <1050000>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index d79e9b3265b9..ab7629c5b856 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -1629,9 +1629,9 @@ compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi"; reg = <0x0 0xff960000 0x0 0x8000>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru SCLK_MIPIDPHY_REF>, <&cru PCLK_MIPI_DSI0>, - <&cru SCLK_DPHY_TX0_CFG>; - clock-names = "ref", "pclk", "phy_cfg"; + clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI0>, + <&cru SCLK_DPHY_TX0_CFG>, <&cru PCLK_VIO_GRF>; + clock-names = "ref", "pclk", "phy_cfg", "grf"; power-domains = <&power RK3399_PD_VIO>; rockchip,grf = <&grf>; status = "disabled"; |