diff options
Diffstat (limited to 'arch')
35 files changed, 304 insertions, 1769 deletions
diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig index 6bb506edb1f5..e96a9743b220 100644 --- a/arch/arm/configs/pxa_defconfig +++ b/arch/arm/configs/pxa_defconfig @@ -66,9 +66,6 @@ CONFIG_MACH_MIOA701=y CONFIG_PXA_EZX=y CONFIG_MACH_MP900C=y CONFIG_ARCH_PXA_PALM=y -CONFIG_MACH_RAUMFELD_RC=y -CONFIG_MACH_RAUMFELD_CONNECTOR=y -CONFIG_MACH_RAUMFELD_SPEAKER=y CONFIG_PXA_SHARPSL=y CONFIG_MACH_POODLE=y CONFIG_MACH_CORGI=y @@ -498,7 +495,6 @@ CONFIG_SND_PXA2XX_SOC_E800=m CONFIG_SND_PXA2XX_SOC_EM_X270=m CONFIG_SND_PXA2XX_SOC_PALM27X=y CONFIG_SND_SOC_ZYLONITE=m -CONFIG_SND_SOC_RAUMFELD=m CONFIG_SND_PXA2XX_SOC_HX4700=m CONFIG_SND_PXA2XX_SOC_MAGICIAN=m CONFIG_SND_PXA2XX_SOC_MIOA701=m diff --git a/arch/arm/configs/raumfeld_defconfig b/arch/arm/configs/raumfeld_defconfig deleted file mode 100644 index 2dd56e9a484e..000000000000 --- a/arch/arm/configs/raumfeld_defconfig +++ /dev/null @@ -1,197 +0,0 @@ -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_LBDAF is not set -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_PXA=y -CONFIG_MACH_RAUMFELD_RC=y -CONFIG_MACH_RAUMFELD_CONNECTOR=y -CONFIG_MACH_RAUMFELD_SPEAKER=y -CONFIG_NO_HZ=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_CMDLINE="console=ttyS0,115200 rw" -CONFIG_CPU_FREQ=y -CONFIG_CPU_IDLE=y -CONFIG_PM=y -CONFIG_APM_EMULATION=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_SYN_COOKIES=y -CONFIG_IPV6=y -CONFIG_CFG80211=y -CONFIG_MAC80211=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_BLOCK=y -CONFIG_NFTL=y -CONFIG_NFTL_RW=y -CONFIG_MTD_BLOCK2MTD=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_MARVELL=y -CONFIG_MTD_UBI=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_ISL29003=y -CONFIG_IIO=y -CONFIG_AD5446=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_SMSC911X=y -CONFIG_LIBERTAS=y -CONFIG_LIBERTAS_SDIO=m -CONFIG_USB_USBNET=y -# CONFIG_USB_NET_AX8817X is not set -# CONFIG_USB_NET_NET1080 is not set -CONFIG_USB_NET_MCS7830=y -# CONFIG_USB_NET_CDC_SUBSET is not set -# CONFIG_USB_NET_ZAURUS is not set -CONFIG_INPUT_EVDEV=y -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_EETI=m -CONFIG_INPUT_MISC=y -CONFIG_INPUT_GPIO_ROTARY_ENCODER=y -CONFIG_SERIAL_PXA=y -CONFIG_SERIAL_PXA_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_PXA=y -CONFIG_SPI=y -CONFIG_SPI_DEBUG=y -CONFIG_SPI_GPIO=y -CONFIG_SPI_SPIDEV=y -CONFIG_DEBUG_GPIO=y -CONFIG_W1_MASTER_GPIO=m -CONFIG_POWER_SUPPLY=y -CONFIG_PDA_POWER=y -CONFIG_BATTERY_DS2760=m -CONFIG_SENSORS_LIS3_SPI=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_DEBUG=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_REGULATOR_MAX8660=y -CONFIG_FB=y -CONFIG_FB_PXA=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -# CONFIG_LCD_CLASS_DEVICE is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_GENERIC is not set -CONFIG_BACKLIGHT_PWM=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set -CONFIG_SOUND=y -CONFIG_SND=y -# CONFIG_SND_DRIVERS is not set -# CONFIG_SND_USB is not set -CONFIG_SND_SOC=y -CONFIG_SND_PXA2XX_SOC=y -CONFIG_SND_SOC_RAUMFELD=y -CONFIG_HID_DRAGONRISE=y -CONFIG_HID_GYRATION=y -CONFIG_HID_TWINHAN=y -CONFIG_HID_NTRIG=y -CONFIG_HID_PANTHERLORD=y -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y -CONFIG_HID_GREENASIA=y -CONFIG_HID_SMARTJOYPLUS=y -CONFIG_HID_TOPSEED=y -CONFIG_HID_THRUSTMASTER=y -CONFIG_HID_ZEROPLUS=y -CONFIG_USB=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_USBAT=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_MMC=y -CONFIG_MMC_PXA=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_LT3593=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_BACKLIGHT=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_PXA=y -CONFIG_DMADEVICES=y -CONFIG_UIO=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XIP=y -CONFIG_EXT3_FS=y -CONFIG_FSCACHE=y -CONFIG_FSCACHE_STATS=y -CONFIG_CACHEFILES=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_UBIFS_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_NFS_FSCACHE=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=y -CONFIG_NLS_CODEPAGE_775=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_CODEPAGE_852=y -CONFIG_NLS_CODEPAGE_855=y -CONFIG_NLS_CODEPAGE_857=y -CONFIG_NLS_CODEPAGE_860=y -CONFIG_NLS_CODEPAGE_861=y -CONFIG_NLS_CODEPAGE_862=y -CONFIG_NLS_CODEPAGE_863=y -CONFIG_NLS_CODEPAGE_864=y -CONFIG_NLS_CODEPAGE_865=y -CONFIG_NLS_CODEPAGE_866=y -CONFIG_NLS_CODEPAGE_869=y -CONFIG_NLS_CODEPAGE_936=y -CONFIG_NLS_CODEPAGE_950=y -CONFIG_NLS_CODEPAGE_932=y -CONFIG_NLS_CODEPAGE_949=y -CONFIG_NLS_CODEPAGE_874=y -CONFIG_NLS_ISO8859_8=y -CONFIG_NLS_CODEPAGE_1250=y -CONFIG_NLS_CODEPAGE_1251=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=y -CONFIG_NLS_ISO8859_3=y -CONFIG_NLS_ISO8859_4=y -CONFIG_NLS_ISO8859_5=y -CONFIG_NLS_ISO8859_6=y -CONFIG_NLS_ISO8859_7=y -CONFIG_NLS_ISO8859_9=y -CONFIG_NLS_ISO8859_13=y -CONFIG_NLS_ISO8859_14=y -CONFIG_NLS_ISO8859_15=y -CONFIG_NLS_KOI8_R=y -CONFIG_NLS_KOI8_U=y -CONFIG_NLS_UTF8=y -CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index c4da635ee4ce..3a2124212a7f 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -18,7 +18,7 @@ #include <linux/platform_device.h> #include <linux/i2c.h> #include <linux/platform_data/pcf857x.h> -#include <linux/platform_data/at24.h> +#include <linux/property.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> @@ -52,62 +52,19 @@ static const short da830_evm_usb11_pins[] = { -1 }; -static da8xx_ocic_handler_t da830_evm_usb_ocic_handler; - -static int da830_evm_usb_set_power(unsigned port, int on) -{ - gpio_set_value(ON_BD_USB_DRV, on); - return 0; -} - -static int da830_evm_usb_get_power(unsigned port) -{ - return gpio_get_value(ON_BD_USB_DRV); -} - -static int da830_evm_usb_get_oci(unsigned port) -{ - return !gpio_get_value(ON_BD_USB_OVC); -} - -static irqreturn_t da830_evm_usb_ocic_irq(int, void *); - -static int da830_evm_usb_ocic_notify(da8xx_ocic_handler_t handler) -{ - int irq = gpio_to_irq(ON_BD_USB_OVC); - int error = 0; - - if (handler != NULL) { - da830_evm_usb_ocic_handler = handler; - - error = request_irq(irq, da830_evm_usb_ocic_irq, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - "OHCI over-current indicator", NULL); - if (error) - pr_err("%s: could not request IRQ to watch over-current indicator changes\n", - __func__); - } else - free_irq(irq, NULL); - - return error; -} +static struct gpiod_lookup_table da830_evm_usb_gpio_lookup = { + .dev_id = "ohci-da8xx", + .table = { + GPIO_LOOKUP("davinci_gpio", ON_BD_USB_DRV, "vbus", 0), + GPIO_LOOKUP("davinci_gpio", ON_BD_USB_OVC, "oc", 0), + }, +}; static struct da8xx_ohci_root_hub da830_evm_usb11_pdata = { - .set_power = da830_evm_usb_set_power, - .get_power = da830_evm_usb_get_power, - .get_oci = da830_evm_usb_get_oci, - .ocic_notify = da830_evm_usb_ocic_notify, - /* TPS2065 switch @ 5V */ .potpgt = (3 + 1) / 2, /* 3 ms max */ }; -static irqreturn_t da830_evm_usb_ocic_irq(int irq, void *dev_id) -{ - da830_evm_usb_ocic_handler(&da830_evm_usb11_pdata, 1); - return IRQ_HANDLED; -} - static __init void da830_evm_usb_init(void) { int ret; @@ -142,21 +99,7 @@ static __init void da830_evm_usb_init(void) return; } - ret = gpio_request(ON_BD_USB_DRV, "ON_BD_USB_DRV"); - if (ret) { - pr_err("%s: failed to request GPIO for USB 1.1 port power control: %d\n", - __func__, ret); - return; - } - gpio_direction_output(ON_BD_USB_DRV, 0); - - ret = gpio_request(ON_BD_USB_OVC, "ON_BD_USB_OVC"); - if (ret) { - pr_err("%s: failed to request GPIO for USB 1.1 port over-current indicator: %d\n", - __func__, ret); - return; - } - gpio_direction_input(ON_BD_USB_OVC); + gpiod_add_lookup_table(&da830_evm_usb_gpio_lookup); ret = da8xx_register_usb11(&da830_evm_usb11_pdata); if (ret) @@ -457,12 +400,9 @@ static struct nvmem_cell_lookup da830_evm_nvmem_cell_lookup = { .con_id = "mac-address", }; -static struct at24_platform_data da830_evm_i2c_eeprom_info = { - .byte_len = SZ_256K / 8, - .page_size = 64, - .flags = AT24_FLAG_ADDR16, - .setup = davinci_get_mac_addr, - .context = (void *)0x7f00, +static const struct property_entry da830_evm_i2c_eeprom_properties[] = { + PROPERTY_ENTRY_U32("pagesize", 64), + { } }; static int __init da830_evm_ui_expander_setup(struct i2c_client *client, @@ -496,7 +436,7 @@ static struct pcf857x_platform_data __initdata da830_evm_ui_expander_info = { static struct i2c_board_info __initdata da830_evm_i2c_devices[] = { { I2C_BOARD_INFO("24c256", 0x50), - .platform_data = &da830_evm_i2c_eeprom_info, + .properties = da830_evm_i2c_eeprom_properties, }, { I2C_BOARD_INFO("tlv320aic3x", 0x18), diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 44bca048dfd0..56d0e0257048 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -150,32 +150,6 @@ static struct spi_board_info da850evm_spi_info[] = { }, }; -#ifdef CONFIG_MTD -static void da850_evm_m25p80_notify_add(struct mtd_info *mtd) -{ - char *mac_addr = davinci_soc_info.emac_pdata->mac_addr; - size_t retlen; - - if (!strcmp(mtd->name, "MAC-Address")) { - mtd_read(mtd, 0, ETH_ALEN, &retlen, mac_addr); - if (retlen == ETH_ALEN) - pr_info("Read MAC addr from SPI Flash: %pM\n", - mac_addr); - } -} - -static struct mtd_notifier da850evm_spi_notifier = { - .add = da850_evm_m25p80_notify_add, -}; - -static void da850_evm_setup_mac_addr(void) -{ - register_mtd_user(&da850evm_spi_notifier); -} -#else -static void da850_evm_setup_mac_addr(void) { } -#endif - static struct mtd_partition da850_evm_norflash_partition[] = { { .name = "bootloaders + env", @@ -1064,6 +1038,17 @@ static const short da850_evm_rmii_pins[] = { -1 }; +static struct gpiod_hog da850_evm_emac_gpio_hogs[] = { + { + .chip_label = "davinci_gpio", + .chip_hwnum = DA850_MII_MDIO_CLKEN_PIN, + .line_name = "mdio_clk_en", + .lflags = 0, + /* dflags set in da850_evm_config_emac() */ + }, + { } +}; + static int __init da850_evm_config_emac(void) { void __iomem *cfg_chip3_base; @@ -1102,14 +1087,9 @@ static int __init da850_evm_config_emac(void) if (ret) pr_warn("%s:GPIO(2,6) mux setup failed\n", __func__); - ret = gpio_request(DA850_MII_MDIO_CLKEN_PIN, "mdio_clk_en"); - if (ret) { - pr_warn("Cannot open GPIO %d\n", DA850_MII_MDIO_CLKEN_PIN); - return ret; - } - - /* Enable/Disable MII MDIO clock */ - gpio_direction_output(DA850_MII_MDIO_CLKEN_PIN, rmii_en); + da850_evm_emac_gpio_hogs[0].dflags = rmii_en ? GPIOD_OUT_HIGH + : GPIOD_OUT_LOW; + gpiod_add_hogs(da850_evm_emac_gpio_hogs); soc_info->emac_pdata->phy_id = DA850_EVM_PHY_ID; @@ -1494,8 +1474,6 @@ static __init void da850_evm_init(void) if (ret) pr_warn("%s: SATA registration failed: %d\n", __func__, ret); - da850_evm_setup_mac_addr(); - ret = da8xx_register_rproc(); if (ret) pr_warn("%s: dsp/rproc registration failed: %d\n", diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index e3b0b701e395..f21dc8d3b28c 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -18,7 +18,7 @@ #include <linux/i2c.h> #include <linux/io.h> #include <linux/clk.h> -#include <linux/platform_data/at24.h> +#include <linux/property.h> #include <linux/leds.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -225,18 +225,15 @@ static struct nvmem_cell_lookup davinci_nvmem_cell_lookup = { .con_id = "mac-address", }; -static struct at24_platform_data eeprom_info = { - .byte_len = (256*1024) / 8, - .page_size = 64, - .flags = AT24_FLAG_ADDR16, - .setup = davinci_get_mac_addr, - .context = (void *)0x7f00, +static const struct property_entry eeprom_properties[] = { + PROPERTY_ENTRY_U32("pagesize", 64), + { } }; static struct i2c_board_info i2c_info[] = { { I2C_BOARD_INFO("24c256", 0x50), - .platform_data = &eeprom_info, + .properties = eeprom_properties, }, { I2C_BOARD_INFO("tlv320aic3x", 0x18), diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index b80c4ee76217..ecd30643c2c4 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -16,8 +16,8 @@ #include <linux/gpio/machine.h> #include <linux/i2c.h> #include <linux/platform_data/pcf857x.h> -#include <linux/platform_data/at24.h> #include <linux/platform_data/gpio-davinci.h> +#include <linux/property.h> #include <linux/mtd/mtd.h> #include <linux/mtd/rawnand.h> #include <linux/mtd/partitions.h> @@ -532,12 +532,9 @@ static struct nvmem_cell_lookup dm644evm_nvmem_cell_lookup = { .con_id = "mac-address", }; -static struct at24_platform_data eeprom_info = { - .byte_len = (256*1024) / 8, - .page_size = 64, - .flags = AT24_FLAG_ADDR16, - .setup = davinci_get_mac_addr, - .context = (void *)0x7f00, +static const struct property_entry eeprom_properties[] = { + PROPERTY_ENTRY_U32("pagesize", 64), + { } }; /* @@ -647,7 +644,7 @@ static struct i2c_board_info __initdata i2c_info[] = { }, { I2C_BOARD_INFO("24c256", 0x50), - .platform_data = &eeprom_info, + .properties = eeprom_properties, }, { I2C_BOARD_INFO("tlv320aic33", 0x1b), diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 8d5be6dd2019..02b57face113 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -22,7 +22,7 @@ #include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/i2c.h> -#include <linux/platform_data/at24.h> +#include <linux/property.h> #include <linux/platform_data/pcf857x.h> #include <linux/platform_data/ti-aemif.h> @@ -364,12 +364,9 @@ static struct nvmem_cell_lookup dm646x_evm_nvmem_cell_lookup = { .con_id = "mac-address", }; -static struct at24_platform_data eeprom_info = { - .byte_len = (256*1024) / 8, - .page_size = 64, - .flags = AT24_FLAG_ADDR16, - .setup = davinci_get_mac_addr, - .context = (void *)0x7f00, +static const struct property_entry eeprom_properties[] = { + PROPERTY_ENTRY_U32("pagesize", 64), + { } }; #endif @@ -440,7 +437,7 @@ static void evm_init_cpld(void) static struct i2c_board_info __initdata i2c_info[] = { { I2C_BOARD_INFO("24c256", 0x50), - .platform_data = &eeprom_info, + .properties = eeprom_properties, }, { I2C_BOARD_INFO("pcf8574a", 0x38), diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index 8df16e81b69e..a381b26328d8 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -14,11 +14,13 @@ #include <linux/init.h> #include <linux/console.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/mtd/partitions.h> +#include <linux/notifier.h> +#include <linux/nvmem-consumer.h> #include <linux/nvmem-provider.h> #include <linux/regulator/machine.h> #include <linux/i2c.h> -#include <linux/platform_data/at24.h> #include <linux/etherdevice.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> @@ -117,11 +119,15 @@ static void mityomapl138_cpufreq_init(const char *partnum) static void mityomapl138_cpufreq_init(const char *partnum) { } #endif -static void read_factory_config(struct nvmem_device *nvmem, void *context) +static int read_factory_config(struct notifier_block *nb, + unsigned long event, void *data) { int ret; const char *partnum = NULL; - struct davinci_soc_info *soc_info = &davinci_soc_info; + struct nvmem_device *nvmem = data; + + if (strcmp(nvmem_dev_name(nvmem), "1-00500") != 0) + return NOTIFY_DONE; if (!IS_BUILTIN(CONFIG_NVMEM)) { pr_warn("Factory Config not available without CONFIG_NVMEM\n"); @@ -147,21 +153,20 @@ static void read_factory_config(struct nvmem_device *nvmem, void *context) goto bad_config; } - pr_info("Found MAC = %pM\n", factory_config.mac); - if (is_valid_ether_addr(factory_config.mac)) - memcpy(soc_info->emac_pdata->mac_addr, - factory_config.mac, ETH_ALEN); - else - pr_warn("Invalid MAC found in factory config block\n"); - partnum = factory_config.partnum; pr_info("Part Number = %s\n", partnum); bad_config: /* default maximum speed is valid for all platforms */ mityomapl138_cpufreq_init(partnum); + + return NOTIFY_STOP; } +static struct notifier_block mityomapl138_nvmem_notifier = { + .notifier_call = read_factory_config, +}; + /* * We don't define a cell for factory config as it will be accessed from the * board file using the nvmem notifier chain. @@ -187,12 +192,10 @@ static struct nvmem_cell_lookup mityomapl138_nvmem_cell_lookup = { .con_id = "mac-address", }; -static struct at24_platform_data mityomapl138_fd_chip = { - .byte_len = 256, - .page_size = 8, - .flags = AT24_FLAG_READONLY | AT24_FLAG_IRUGO, - .setup = read_factory_config, - .context = NULL, +static const struct property_entry mityomapl138_fd_chip_properties[] = { + PROPERTY_ENTRY_U32("pagesize", 8), + PROPERTY_ENTRY_BOOL("read-only"), + { } }; static struct davinci_i2c_platform_data mityomap_i2c_0_pdata = { @@ -321,7 +324,7 @@ static struct i2c_board_info __initdata mityomap_tps65023_info[] = { }, { I2C_BOARD_INFO("24c02", 0x50), - .platform_data = &mityomapl138_fd_chip, + .properties = mityomapl138_fd_chip_properties, }, }; @@ -569,6 +572,7 @@ static void __init mityomapl138_init(void) davinci_serial_init(da8xx_serial_device); + nvmem_register_notifier(&mityomapl138_nvmem_notifier); nvmem_add_cell_table(&mityomapl138_nvmem_cell_table); nvmem_add_cell_lookups(&mityomapl138_nvmem_cell_lookup, 1); diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index 94c4f126ef86..88a0c62eee86 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -294,66 +294,24 @@ static int omapl138_hawk_register_aemif(void) return platform_device_register(&omapl138_hawk_aemif_device); } -static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id); -static da8xx_ocic_handler_t hawk_usb_ocic_handler; - static const short da850_hawk_usb11_pins[] = { DA850_GPIO2_4, DA850_GPIO6_13, -1 }; -static int hawk_usb_set_power(unsigned port, int on) -{ - gpio_set_value(DA850_USB1_VBUS_PIN, on); - return 0; -} - -static int hawk_usb_get_power(unsigned port) -{ - return gpio_get_value(DA850_USB1_VBUS_PIN); -} - -static int hawk_usb_get_oci(unsigned port) -{ - return !gpio_get_value(DA850_USB1_OC_PIN); -} - -static int hawk_usb_ocic_notify(da8xx_ocic_handler_t handler) -{ - int irq = gpio_to_irq(DA850_USB1_OC_PIN); - int error = 0; - - if (handler != NULL) { - hawk_usb_ocic_handler = handler; - - error = request_irq(irq, omapl138_hawk_usb_ocic_irq, - IRQF_TRIGGER_RISING | - IRQF_TRIGGER_FALLING, - "OHCI over-current indicator", NULL); - if (error) - pr_err("%s: could not request IRQ to watch " - "over-current indicator changes\n", __func__); - } else { - free_irq(irq, NULL); - } - return error; -} +static struct gpiod_lookup_table hawk_usb_gpio_lookup = { + .dev_id = "ohci-da8xx", + .table = { + GPIO_LOOKUP("davinci_gpio", DA850_USB1_VBUS_PIN, "vbus", 0), + GPIO_LOOKUP("davinci_gpio", DA850_USB1_OC_PIN, "oc", 0), + }, +}; static struct da8xx_ohci_root_hub omapl138_hawk_usb11_pdata = { - .set_power = hawk_usb_set_power, - .get_power = hawk_usb_get_power, - .get_oci = hawk_usb_get_oci, - .ocic_notify = hawk_usb_ocic_notify, /* TPS2087 switch @ 5V */ .potpgt = (3 + 1) / 2, /* 3 ms max */ }; -static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id) -{ - hawk_usb_ocic_handler(&omapl138_hawk_usb11_pdata, 1); - return IRQ_HANDLED; -} - static __init void omapl138_hawk_usb_init(void) { int ret; @@ -374,34 +332,13 @@ static __init void omapl138_hawk_usb_init(void) pr_warn("%s: USB PHY registration failed: %d\n", __func__, ret); - ret = gpio_request_one(DA850_USB1_VBUS_PIN, - GPIOF_DIR_OUT, "USB1 VBUS"); - if (ret < 0) { - pr_err("%s: failed to request GPIO for USB 1.1 port " - "power control: %d\n", __func__, ret); - return; - } - - ret = gpio_request_one(DA850_USB1_OC_PIN, - GPIOF_DIR_IN, "USB1 OC"); - if (ret < 0) { - pr_err("%s: failed to request GPIO for USB 1.1 port " - "over-current indicator: %d\n", __func__, ret); - goto usb11_setup_oc_fail; - } + gpiod_add_lookup_table(&hawk_usb_gpio_lookup); ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata); - if (ret) { + if (ret) pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret); - goto usb11_setup_fail; - } return; - -usb11_setup_fail: - gpio_free(DA850_USB1_OC_PIN); -usb11_setup_oc_fail: - gpio_free(DA850_USB1_VBUS_PIN); } static __init void omapl138_hawk_init(void) diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 792bb84d5011..ff14de1396c8 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -26,7 +26,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/i2c.h> -#include <linux/platform_data/at24.h> +#include <linux/property.h> #include <linux/mtd/mtd.h> #include <linux/mtd/rawnand.h> #include <linux/mtd/partitions.h> @@ -92,16 +92,15 @@ static struct platform_device davinci_sffsdr_nandflash_device = { .resource = davinci_sffsdr_nandflash_resource, }; -static struct at24_platform_data eeprom_info = { - .byte_len = (64*1024) / 8, - .page_size = 32, - .flags = AT24_FLAG_ADDR16, +static const struct property_entry eeprom_properties[] = { + PROPERTY_ENTRY_U32("pagesize", 32), + { } }; static struct i2c_board_info __initdata i2c_info[] = { { - I2C_BOARD_INFO("24lc64", 0x50), - .platform_data = &eeprom_info, + I2C_BOARD_INFO("24c64", 0x50), + .properties = eeprom_properties, }, /* Other I2C devices: * MSP430, addr 0x23 (not used) diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c index e1d0f0d841ff..0c638fe15dcb 100644 --- a/arch/arm/mach-davinci/common.c +++ b/arch/arm/mach-davinci/common.c @@ -26,21 +26,6 @@ EXPORT_SYMBOL(davinci_soc_info); void __iomem *davinci_intc_base; int davinci_intc_type; -void davinci_get_mac_addr(struct nvmem_device *nvmem, void *context) -{ - char *mac_addr = davinci_soc_info.emac_pdata->mac_addr; - off_t offset = (off_t)context; - - if (!IS_BUILTIN(CONFIG_NVMEM)) { - pr_warn("Cannot read MAC addr from EEPROM without CONFIG_NVMEM\n"); - return; - } - - /* Read MAC addr from EEPROM */ - if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN) - pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr); -} - static int __init davinci_init_id(struct davinci_soc_info *soc_info) { int i; diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index c6a533699b00..85b74ac943f0 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -26,7 +26,6 @@ #include <mach/gpio-ep93xx.h> #include <mach/hardware.h> #include <mach/irqs.h> -#include <mach/gpio-ep93xx.h> #include <asm/mach-types.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index c39ffd2e2fe6..b6da7edbbd2f 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -336,9 +336,9 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) /* wait max 10 ms until cpu1 is on */ while (exynos_cpu_power_state(core_id) != S5P_CORE_LOCAL_PWR_EN) { - if (timeout-- == 0) + if (timeout == 0) break; - + timeout--; mdelay(1); } diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 8af2f7e91d13..35ff620537e6 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -29,9 +29,10 @@ obj-$(CONFIG_SOC_IMX6SL) += cpuidle-imx6sl.o obj-$(CONFIG_SOC_IMX6SLL) += cpuidle-imx6sx.o obj-$(CONFIG_SOC_IMX6SX) += cpuidle-imx6sx.o obj-$(CONFIG_SOC_IMX6UL) += cpuidle-imx6sx.o +obj-$(CONFIG_SOC_IMX7ULP) += cpuidle-imx7ulp.o endif -ifdef CONFIG_SND_IMX_SOC +ifdef CONFIG_SND_SOC_IMX_PCM_FIQ obj-y += ssi-fiq.o obj-y += ssi-fiq-ksym.o endif diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index bc915e5b4d56..c51764a85fd7 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -72,6 +72,15 @@ enum mxc_cpu_pwr_mode { STOP_POWER_OFF, /* STOP + SRPG */ }; +enum ulp_cpu_pwr_mode { + ULP_PM_HSRUN, /* High speed run mode */ + ULP_PM_RUN, /* Run mode */ + ULP_PM_WAIT, /* Wait mode */ + ULP_PM_STOP, /* Stop mode */ + ULP_PM_VLPS, /* Very low power stop mode */ + ULP_PM_VLLS, /* very low leakage stop mode */ +}; + void imx_enable_cpu(int cpu, bool enable); void imx_set_cpu_jump(int cpu, void *jump_addr); u32 imx_get_cpu_arg(int cpu); @@ -98,6 +107,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode); void imx6_set_int_mem_clk_lpm(bool enable); void imx6sl_set_wait_clk(bool enter); int imx_mmdc_get_ddr_type(void); +int imx7ulp_set_lpm(enum ulp_cpu_pwr_mode mode); void imx_cpu_die(unsigned int cpu); int imx_cpu_kill(unsigned int cpu); diff --git a/arch/arm/mach-imx/cpuidle-imx7ulp.c b/arch/arm/mach-imx/cpuidle-imx7ulp.c new file mode 100644 index 000000000000..ca86c967d19e --- /dev/null +++ b/arch/arm/mach-imx/cpuidle-imx7ulp.c @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP + * Anson Huang <Anson.Huang@nxp.com> + */ + +#include <linux/cpuidle.h> +#include <linux/module.h> +#include <asm/cpuidle.h> + +#include "common.h" +#include "cpuidle.h" + +static int imx7ulp_enter_wait(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + if (index == 1) + imx7ulp_set_lpm(ULP_PM_WAIT); + else + imx7ulp_set_lpm(ULP_PM_STOP); + + cpu_do_idle(); + + imx7ulp_set_lpm(ULP_PM_RUN); + + return index; +} + +static struct cpuidle_driver imx7ulp_cpuidle_driver = { + .name = "imx7ulp_cpuidle", + .owner = THIS_MODULE, + .states = { + /* WFI */ + ARM_CPUIDLE_WFI_STATE, + /* WAIT */ + { + .exit_latency = 50, + .target_residency = 75, + .enter = imx7ulp_enter_wait, + .name = "WAIT", + .desc = "PSTOP2", + }, + /* STOP */ + { + .exit_latency = 100, + .target_residency = 150, + .enter = imx7ulp_enter_wait, + .name = "STOP", + .desc = "PSTOP1", + }, + }, + .state_count = 3, + .safe_state_index = 0, +}; + +int __init imx7ulp_cpuidle_init(void) +{ + return cpuidle_register(&imx7ulp_cpuidle_driver, NULL); +} diff --git a/arch/arm/mach-imx/cpuidle.h b/arch/arm/mach-imx/cpuidle.h index f9140128ba05..7694c8f810a4 100644 --- a/arch/arm/mach-imx/cpuidle.h +++ b/arch/arm/mach-imx/cpuidle.h @@ -15,6 +15,7 @@ extern int imx5_cpuidle_init(void); extern int imx6q_cpuidle_init(void); extern int imx6sl_cpuidle_init(void); extern int imx6sx_cpuidle_init(void); +extern int imx7ulp_cpuidle_init(void); #else static inline int imx5_cpuidle_init(void) { @@ -32,4 +33,8 @@ static inline int imx6sx_cpuidle_init(void) { return 0; } +static inline int imx7ulp_cpuidle_init(void) +{ + return 0; +} #endif diff --git a/arch/arm/mach-imx/mach-imx7ulp.c b/arch/arm/mach-imx/mach-imx7ulp.c index 33937ebf66b5..11ac71aaf965 100644 --- a/arch/arm/mach-imx/mach-imx7ulp.c +++ b/arch/arm/mach-imx/mach-imx7ulp.c @@ -6,17 +6,57 @@ */ #include <linux/irqchip.h> +#include <linux/mfd/syscon.h> #include <linux/of_platform.h> +#include <linux/regmap.h> #include <asm/mach/arch.h> #include "common.h" +#include "cpuidle.h" #include "hardware.h" +#define SIM_JTAG_ID_REG 0x8c + +static void __init imx7ulp_set_revision(void) +{ + struct regmap *sim; + u32 revision; + + sim = syscon_regmap_lookup_by_compatible("fsl,imx7ulp-sim"); + if (IS_ERR(sim)) { + pr_warn("failed to find fsl,imx7ulp-sim regmap!\n"); + return; + } + + if (regmap_read(sim, SIM_JTAG_ID_REG, &revision)) { + pr_warn("failed to read sim regmap!\n"); + return; + } + + /* + * bit[31:28] of JTAG_ID register defines revision as below from B0: + * 0001 B0 + * 0010 B1 + */ + switch (revision >> 28) { + case 1: + imx_set_soc_revision(IMX_CHIP_REVISION_2_0); + break; + case 2: + imx_set_soc_revision(IMX_CHIP_REVISION_2_1); + break; + default: + imx_set_soc_revision(IMX_CHIP_REVISION_1_0); + break; + } +} + static void __init imx7ulp_init_machine(void) { imx7ulp_pm_init(); mxc_set_cpu_type(MXC_CPU_IMX7ULP); + imx7ulp_set_revision(); of_platform_default_populate(NULL, NULL, imx_soc_device_init()); } @@ -25,7 +65,13 @@ static const char *const imx7ulp_dt_compat[] __initconst = { NULL, }; +static void __init imx7ulp_init_late(void) +{ + imx7ulp_cpuidle_init(); +} + DT_MACHINE_START(IMX7ulp, "Freescale i.MX7ULP (Device Tree)") .init_machine = imx7ulp_init_machine, .dt_compat = imx7ulp_dt_compat, + .init_late = imx7ulp_init_late, MACHINE_END diff --git a/arch/arm/mach-imx/pm-imx7ulp.c b/arch/arm/mach-imx/pm-imx7ulp.c index cf6a380c2b8d..7b2f7387e662 100644 --- a/arch/arm/mach-imx/pm-imx7ulp.c +++ b/arch/arm/mach-imx/pm-imx7ulp.c @@ -9,21 +9,60 @@ #include <linux/of.h> #include <linux/of_address.h> +#include "common.h" + #define SMC_PMCTRL 0x10 #define BP_PMCTRL_PSTOPO 16 #define PSTOPO_PSTOP3 0x3 +#define PSTOPO_PSTOP2 0x2 +#define PSTOPO_PSTOP1 0x1 +#define BP_PMCTRL_RUNM 8 +#define RUNM_RUN 0 +#define BP_PMCTRL_STOPM 0 +#define STOPM_STOP 0 + +#define BM_PMCTRL_PSTOPO (3 << BP_PMCTRL_PSTOPO) +#define BM_PMCTRL_RUNM (3 << BP_PMCTRL_RUNM) +#define BM_PMCTRL_STOPM (7 << BP_PMCTRL_STOPM) + +static void __iomem *smc1_base; + +int imx7ulp_set_lpm(enum ulp_cpu_pwr_mode mode) +{ + u32 val = readl_relaxed(smc1_base + SMC_PMCTRL); + + /* clear all */ + val &= ~(BM_PMCTRL_RUNM | BM_PMCTRL_STOPM | BM_PMCTRL_PSTOPO); + + switch (mode) { + case ULP_PM_RUN: + /* system/bus clock enabled */ + val |= PSTOPO_PSTOP3 << BP_PMCTRL_PSTOPO; + break; + case ULP_PM_WAIT: + /* system clock disabled, bus clock enabled */ + val |= PSTOPO_PSTOP2 << BP_PMCTRL_PSTOPO; + break; + case ULP_PM_STOP: + /* system/bus clock disabled */ + val |= PSTOPO_PSTOP1 << BP_PMCTRL_PSTOPO; + break; + default: + return -EINVAL; + } + + writel_relaxed(val, smc1_base + SMC_PMCTRL); + + return 0; +} void __init imx7ulp_pm_init(void) { struct device_node *np; - void __iomem *smc1_base; np = of_find_compatible_node(NULL, NULL, "fsl,imx7ulp-smc1"); smc1_base = of_iomap(np, 0); WARN_ON(!smc1_base); - /* Partial Stop mode 3 with system/bus clock enabled */ - writel_relaxed(PSTOPO_PSTOP3 << BP_PMCTRL_PSTOPO, - smc1_base + SMC_PMCTRL); - iounmap(smc1_base); + imx7ulp_set_lpm(ULP_PM_RUN); } diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index e48cc06c2aec..b3be60a8e467 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -45,73 +45,6 @@ #include <mach/board.h> #include "common.h" -/* - * AMBA LCD controller - */ -static struct clcd_panel conn_lcd_panel = { - .mode = { - .name = "QVGA portrait", - .refresh = 60, - .xres = 240, - .yres = 320, - .pixclock = 191828, - .left_margin = 22, - .right_margin = 11, - .upper_margin = 2, - .lower_margin = 1, - .hsync_len = 5, - .vsync_len = 2, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = (TIM2_IVS | TIM2_IHS), - .cntl = (CNTL_BGR | CNTL_LCDTFT | CNTL_LCDVCOMP(1) | - CNTL_LCDBPP16_565), - .bpp = 16, -}; -#define PANEL_SIZE (3 * SZ_64K) - -static int lpc32xx_clcd_setup(struct clcd_fb *fb) -{ - dma_addr_t dma; - - fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, PANEL_SIZE, &dma, - GFP_KERNEL); - if (!fb->fb.screen_base) { - printk(KERN_ERR "CLCD: unable to map framebuffer\n"); - return -ENOMEM; - } - - fb->fb.fix.smem_start = dma; - fb->fb.fix.smem_len = PANEL_SIZE; - fb->panel = &conn_lcd_panel; - - return 0; -} - -static int lpc32xx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) -{ - return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base, - fb->fb.fix.smem_start, fb->fb.fix.smem_len); -} - -static void lpc32xx_clcd_remove(struct clcd_fb *fb) -{ - dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base, - fb->fb.fix.smem_start); -} - -static struct clcd_board lpc32xx_clcd_data = { - .name = "Phytec LCD", - .check = clcdfb_check, - .decode = clcdfb_decode, - .setup = lpc32xx_clcd_setup, - .mmap = lpc32xx_clcd_mmap, - .remove = lpc32xx_clcd_remove, -}; - static struct pl08x_channel_data pl08x_slave_channels[] = { { .bus_id = "nand-slc", @@ -148,11 +81,6 @@ static struct pl08x_platform_data pl08x_pd = { .mem_buses = PL08X_AHB1, }; -static struct mmci_platform_data lpc32xx_mmci_data = { - .ocr_mask = MMC_VDD_30_31 | MMC_VDD_31_32 | - MMC_VDD_32_33 | MMC_VDD_33_34, -}; - static struct lpc32xx_slc_platform_data lpc32xx_slc_data = { .dma_filter = pl08x_filter_id, }; @@ -164,10 +92,7 @@ static struct lpc32xx_mlc_platform_data lpc32xx_mlc_data = { static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("arm,pl022", 0x20084000, "dev:ssp0", NULL), OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", NULL), - OF_DEV_AUXDATA("arm,pl110", 0x31040000, "dev:clcd", &lpc32xx_clcd_data), OF_DEV_AUXDATA("arm,pl080", 0x31000000, "pl08xdmac", &pl08x_pd), - OF_DEV_AUXDATA("arm,pl18x", 0x20098000, "20098000.sd", - &lpc32xx_mmci_data), OF_DEV_AUXDATA("nxp,lpc3220-slc", 0x20020000, "20020000.flash", &lpc32xx_slc_data), OF_DEV_AUXDATA("nxp,lpc3220-mlc", 0x200a8000, "200a8000.flash", @@ -177,15 +102,6 @@ static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = { static void __init lpc3250_machine_init(void) { - u32 tmp; - - /* Setup LCD muxing to RGB565 */ - tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL) & - ~(LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_MSK | - LPC32XX_CLKPWR_LCDCTRL_PSCALE_MSK); - tmp |= LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT16; - __raw_writel(tmp, LPC32XX_CLKPWR_LCDCLK_CTRL); - lpc32xx_serial_init(); /* Test clock needed for UDA1380 initial init */ diff --git a/arch/arm/mach-lpc32xx/pm.c b/arch/arm/mach-lpc32xx/pm.c index 62471570d586..32bca351a73b 100644 --- a/arch/arm/mach-lpc32xx/pm.c +++ b/arch/arm/mach-lpc32xx/pm.c @@ -86,17 +86,10 @@ static int lpc32xx_pm_enter(suspend_state_t state) void *iram_swap_area; /* Allocate some space for temporary IRAM storage */ - iram_swap_area = kmalloc(lpc32xx_sys_suspend_sz, GFP_KERNEL); - if (!iram_swap_area) { - printk(KERN_ERR - "PM Suspend: cannot allocate memory to save portion " - "of SRAM\n"); + iram_swap_area = kmemdup((void *)TEMP_IRAM_AREA, + lpc32xx_sys_suspend_sz, GFP_KERNEL); + if (!iram_swap_area) return -ENOMEM; - } - - /* Backup a small area of IRAM used for the suspend code */ - memcpy(iram_swap_area, (void *) TEMP_IRAM_AREA, - lpc32xx_sys_suspend_sz); /* * Copy code to suspend system into IRAM. The suspend code diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig index 91cc461f7b04..11ed264f0731 100644 --- a/arch/arm/mach-mediatek/Kconfig +++ b/arch/arm/mach-mediatek/Kconfig @@ -26,6 +26,10 @@ config MACH_MT7623 bool "MediaTek MT7623 SoCs support" default ARCH_MEDIATEK +config MACH_MT7629 + bool "MediaTek MT7629 SoCs support" + default ARCH_MEDIATEK + config MACH_MT8127 bool "MediaTek MT8127 SoCs support" default ARCH_MEDIATEK diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c index 6910b4e0d913..b6a81ba1ce32 100644 --- a/arch/arm/mach-mediatek/mediatek.c +++ b/arch/arm/mach-mediatek/mediatek.c @@ -30,7 +30,6 @@ static void __init mediatek_timer_init(void) if (of_machine_is_compatible("mediatek,mt6589") || of_machine_is_compatible("mediatek,mt7623") || - of_machine_is_compatible("mediatek,mt7623a") || of_machine_is_compatible("mediatek,mt8135") || of_machine_is_compatible("mediatek,mt8127")) { /* turn on GPT6 which ungates arch timer clocks */ @@ -50,7 +49,7 @@ static const char * const mediatek_board_dt_compat[] = { "mediatek,mt6589", "mediatek,mt6592", "mediatek,mt7623", - "mediatek,mt7623a", + "mediatek,mt7629", "mediatek,mt8127", "mediatek,mt8135", NULL, diff --git a/arch/arm/mach-mediatek/platsmp.c b/arch/arm/mach-mediatek/platsmp.c index 6882ff07aaa6..c9d7c0458452 100644 --- a/arch/arm/mach-mediatek/platsmp.c +++ b/arch/arm/mach-mediatek/platsmp.c @@ -60,7 +60,7 @@ static const struct of_device_id mtk_tz_smp_boot_infos[] __initconst = { static const struct of_device_id mtk_smp_boot_infos[] __initconst = { { .compatible = "mediatek,mt6589", .data = &mtk_mt6589_boot }, { .compatible = "mediatek,mt7623", .data = &mtk_mt7623_boot }, - { .compatible = "mediatek,mt7623a", .data = &mtk_mt7623_boot }, + { .compatible = "mediatek,mt7629", .data = &mtk_mt7623_boot }, {}, }; diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig index b16831697183..15e9cb75738e 100644 --- a/arch/arm/mach-meson/Kconfig +++ b/arch/arm/mach-meson/Kconfig @@ -9,7 +9,6 @@ menuconfig ARCH_MESON select PINCTRL select PINCTRL_MESON select COMMON_CLK - select COMMON_CLK_AMLOGIC select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index dc8e4f4b7ade..8839c72fdee3 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -454,24 +454,6 @@ config MACH_TREO680 Say Y here if you intend to run this kernel on Palm Treo 680 smartphone. -config MACH_RAUMFELD_RC - bool "Raumfeld Controller" - select CPU_PXA300 - select POWER_SUPPLY - select PXA3xx - -config MACH_RAUMFELD_CONNECTOR - bool "Raumfeld Connector" - select CPU_PXA300 - select POWER_SUPPLY - select PXA3xx - -config MACH_RAUMFELD_SPEAKER - bool "Raumfeld Speaker" - select CPU_PXA300 - select POWER_SUPPLY - select PXA3xx - config PXA_SHARPSL bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models" select SHARP_PARAM diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 0a8e9611052f..f70728930c4f 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -86,9 +86,6 @@ obj-$(CONFIG_MACH_POODLE) += poodle.o obj-$(CONFIG_MACH_TOSA) += tosa.o obj-$(CONFIG_MACH_ICONTROL) += icontrol.o mxm8x10.o obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o -obj-$(CONFIG_MACH_RAUMFELD_RC) += raumfeld.o -obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR) += raumfeld.o -obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o obj-$(CONFIG_MACH_ZIPIT2) += z2.o obj-$(CONFIG_PXA_SYSTEMS_CPLDS) += pxa_cplds_irqs.o diff --git a/arch/arm/mach-pxa/include/mach/pxa25x-udc.h b/arch/arm/mach-pxa/include/mach/pxa25x-udc.h deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/arch/arm/mach-pxa/include/mach/pxa25x-udc.h +++ /dev/null diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c deleted file mode 100644 index e13bfc9b01d2..000000000000 --- a/arch/arm/mach-pxa/raumfeld.c +++ /dev/null @@ -1,1186 +0,0 @@ -/* - * arch/arm/mach-pxa/raumfeld.c - * - * Support for the following Raumfeld devices: - * - * * Controller - * * Connector - * * Speaker S/M - * - * See http://www.raumfeld.com for details. - * - * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/property.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/gpio.h> -#include <linux/gpio/machine.h> -#include <linux/smsc911x.h> -#include <linux/input.h> -#include <linux/gpio_keys.h> -#include <linux/leds.h> -#include <linux/w1-gpio.h> -#include <linux/sched.h> -#include <linux/pwm.h> -#include <linux/pwm_backlight.h> -#include <linux/i2c.h> -#include <linux/platform_data/i2c-pxa.h> -#include <linux/spi/spi.h> -#include <linux/spi/spi_gpio.h> -#include <linux/lis3lv02d.h> -#include <linux/pda_power.h> -#include <linux/power_supply.h> -#include <linux/regulator/max8660.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/consumer.h> -#include <linux/delay.h> - -#include <asm/system_info.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "pxa300.h" -#include <linux/platform_data/usb-ohci-pxa27x.h> -#include <linux/platform_data/video-pxafb.h> -#include <linux/platform_data/mmc-pxamci.h> -#include <linux/platform_data/mtd-nand-pxa3xx.h> - -#include "generic.h" -#include "devices.h" - -/* common GPIO definitions */ - -/* inputs */ -#define GPIO_ON_OFF (14) -#define GPIO_VOLENC_A (19) -#define GPIO_VOLENC_B (20) -#define GPIO_CHARGE_DONE (23) -#define GPIO_CHARGE_IND (27) -#define GPIO_TOUCH_IRQ (32) -#define GPIO_ETH_IRQ (40) -#define GPIO_SPI_MISO (98) -#define GPIO_ACCEL_IRQ (104) -#define GPIO_RESCUE_BOOT (115) -#define GPIO_DOCK_DETECT (116) -#define GPIO_KEY1 (117) -#define GPIO_KEY2 (118) -#define GPIO_KEY3 (119) -#define GPIO_CHARGE_USB_OK (112) -#define GPIO_CHARGE_DC_OK (101) -#define GPIO_CHARGE_USB_SUSP (102) - -/* outputs */ -#define GPIO_SHUTDOWN_SUPPLY (16) -#define GPIO_SHUTDOWN_BATT (18) -#define GPIO_CHRG_PEN2 (31) -#define GPIO_TFT_VA_EN (33) -#define GPIO_SPDIF_CS (34) -#define GPIO_LED2 (35) -#define GPIO_LED1 (36) -#define GPIO_SPDIF_RESET (38) -#define GPIO_SPI_CLK (95) -#define GPIO_MCLK_DAC_CS (96) -#define GPIO_SPI_MOSI (97) -#define GPIO_W1_PULLUP_ENABLE (105) -#define GPIO_DISPLAY_ENABLE (106) -#define GPIO_MCLK_RESET (111) -#define GPIO_W2W_RESET (113) -#define GPIO_W2W_PDN (114) -#define GPIO_CODEC_RESET (120) -#define GPIO_AUDIO_VA_ENABLE (124) -#define GPIO_ACCEL_CS (125) -#define GPIO_ONE_WIRE (126) - -/* - * GPIO configurations - */ -static mfp_cfg_t raumfeld_controller_pin_config[] __initdata = { - /* UART1 */ - GPIO77_UART1_RXD, - GPIO78_UART1_TXD, - GPIO79_UART1_CTS, - GPIO81_UART1_DSR, - GPIO83_UART1_DTR, - GPIO84_UART1_RTS, - - /* UART3 */ - GPIO110_UART3_RXD, - - /* USB Host */ - GPIO0_2_USBH_PEN, - GPIO1_2_USBH_PWR, - - /* I2C */ - GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT, - GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT, - - /* SPI */ - GPIO34_GPIO, /* SPDIF_CS */ - GPIO96_GPIO, /* MCLK_CS */ - GPIO125_GPIO, /* ACCEL_CS */ - - /* MMC */ - GPIO3_MMC1_DAT0, - GPIO4_MMC1_DAT1, - GPIO5_MMC1_DAT2, - GPIO6_MMC1_DAT3, - GPIO7_MMC1_CLK, - GPIO8_MMC1_CMD, - - /* One-wire */ - GPIO126_GPIO | MFP_LPM_FLOAT, - GPIO105_GPIO | MFP_PULL_LOW | MFP_LPM_PULL_LOW, - - /* CHRG_USB_OK */ - GPIO101_GPIO | MFP_PULL_HIGH, - /* CHRG_USB_OK */ - GPIO112_GPIO | MFP_PULL_HIGH, - /* CHRG_USB_SUSP */ - GPIO102_GPIO, - /* DISPLAY_ENABLE */ - GPIO106_GPIO, - /* DOCK_DETECT */ - GPIO116_GPIO | MFP_LPM_FLOAT | MFP_PULL_FLOAT, - - /* LCD */ - GPIO54_LCD_LDD_0, - GPIO55_LCD_LDD_1, - GPIO56_LCD_LDD_2, - GPIO57_LCD_LDD_3, - GPIO58_LCD_LDD_4, - GPIO59_LCD_LDD_5, - GPIO60_LCD_LDD_6, - GPIO61_LCD_LDD_7, - GPIO62_LCD_LDD_8, - GPIO63_LCD_LDD_9, - GPIO64_LCD_LDD_10, - GPIO65_LCD_LDD_11, - GPIO66_LCD_LDD_12, - GPIO67_LCD_LDD_13, - GPIO68_LCD_LDD_14, - GPIO69_LCD_LDD_15, - GPIO70_LCD_LDD_16, - GPIO71_LCD_LDD_17, - GPIO72_LCD_FCLK, - GPIO73_LCD_LCLK, - GPIO74_LCD_PCLK, - GPIO75_LCD_BIAS, -}; - -static mfp_cfg_t raumfeld_connector_pin_config[] __initdata = { - /* UART1 */ - GPIO77_UART1_RXD, - GPIO78_UART1_TXD, - GPIO79_UART1_CTS, - GPIO81_UART1_DSR, - GPIO83_UART1_DTR, - GPIO84_UART1_RTS, - - /* UART3 */ - GPIO110_UART3_RXD, - - /* USB Host */ - GPIO0_2_USBH_PEN, - GPIO1_2_USBH_PWR, - - /* I2C */ - GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT, - GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT, - - /* SPI */ - GPIO34_GPIO, /* SPDIF_CS */ - GPIO96_GPIO, /* MCLK_CS */ - GPIO125_GPIO, /* ACCEL_CS */ - - /* MMC */ - GPIO3_MMC1_DAT0, - GPIO4_MMC1_DAT1, - GPIO5_MMC1_DAT2, - GPIO6_MMC1_DAT3, - GPIO7_MMC1_CLK, - GPIO8_MMC1_CMD, - - /* Ethernet */ - GPIO1_nCS2, /* CS */ - GPIO40_GPIO | MFP_PULL_HIGH, /* IRQ */ - - /* SSP for I2S */ - GPIO85_SSP1_SCLK, - GPIO89_SSP1_EXTCLK, - GPIO86_SSP1_FRM, - GPIO87_SSP1_TXD, - GPIO88_SSP1_RXD, - GPIO90_SSP1_SYSCLK, - - /* SSP2 for S/PDIF */ - GPIO25_SSP2_SCLK, - GPIO26_SSP2_FRM, - GPIO27_SSP2_TXD, - GPIO29_SSP2_EXTCLK, - - /* LEDs */ - GPIO35_GPIO | MFP_LPM_PULL_LOW, - GPIO36_GPIO | MFP_LPM_DRIVE_HIGH, -}; - -static mfp_cfg_t raumfeld_speaker_pin_config[] __initdata = { - /* UART1 */ - GPIO77_UART1_RXD, - GPIO78_UART1_TXD, - GPIO79_UART1_CTS, - GPIO81_UART1_DSR, - GPIO83_UART1_DTR, - GPIO84_UART1_RTS, - - /* UART3 */ - GPIO110_UART3_RXD, - - /* USB Host */ - GPIO0_2_USBH_PEN, - GPIO1_2_USBH_PWR, - - /* I2C */ - GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT, - GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT, - - /* SPI */ - GPIO34_GPIO, /* SPDIF_CS */ - GPIO96_GPIO, /* MCLK_CS */ - GPIO125_GPIO, /* ACCEL_CS */ - - /* MMC */ - GPIO3_MMC1_DAT0, - GPIO4_MMC1_DAT1, - GPIO5_MMC1_DAT2, - GPIO6_MMC1_DAT3, - GPIO7_MMC1_CLK, - GPIO8_MMC1_CMD, - - /* Ethernet */ - GPIO1_nCS2, /* CS */ - GPIO40_GPIO | MFP_PULL_HIGH, /* IRQ */ - - /* SSP for I2S */ - GPIO85_SSP1_SCLK, - GPIO89_SSP1_EXTCLK, - GPIO86_SSP1_FRM, - GPIO87_SSP1_TXD, - GPIO88_SSP1_RXD, - GPIO90_SSP1_SYSCLK, - - /* LEDs */ - GPIO35_GPIO | MFP_LPM_PULL_LOW, - GPIO36_GPIO | MFP_LPM_DRIVE_HIGH, -}; - -/* - * SMSC LAN9220 Ethernet - */ - -static struct resource smc91x_resources[] = { - { - .start = PXA3xx_CS2_PHYS, - .end = PXA3xx_CS2_PHYS + 0xfffff, - .flags = IORESOURCE_MEM, - }, - { - .start = PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ), - .end = PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ), - .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, - } -}; - -static struct smsc911x_platform_config raumfeld_smsc911x_config = { - .phy_interface = PHY_INTERFACE_MODE_MII, - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, -}; - -static struct platform_device smc91x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, - .dev = { - .platform_data = &raumfeld_smsc911x_config, - } -}; - -/** - * NAND - */ - -static struct mtd_partition raumfeld_nand_partitions[] = { - { - .name = "Bootloader", - .offset = 0, - .size = 0xa0000, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "BootloaderEnvironment", - .offset = 0xa0000, - .size = 0x20000, - }, - { - .name = "BootloaderSplashScreen", - .offset = 0xc0000, - .size = 0x60000, - }, - { - .name = "UBI", - .offset = 0x120000, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct pxa3xx_nand_platform_data raumfeld_nand_info = { - .keep_config = 1, - .parts = raumfeld_nand_partitions, - .nr_parts = ARRAY_SIZE(raumfeld_nand_partitions), -}; - -/** - * USB (OHCI) support - */ - -static struct pxaohci_platform_data raumfeld_ohci_info = { - .port_mode = PMM_GLOBAL_MODE, - .flags = ENABLE_PORT1, -}; - -/** - * Rotary encoder input device - */ - -static struct gpiod_lookup_table raumfeld_rotary_gpios_table = { - .dev_id = "rotary-encoder.0", - .table = { - GPIO_LOOKUP_IDX("gpio-0", - GPIO_VOLENC_A, NULL, 0, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("gpio-0", - GPIO_VOLENC_B, NULL, 1, GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static const struct property_entry raumfeld_rotary_properties[] __initconst = { - PROPERTY_ENTRY_U32("rotary-encoder,steps-per-period", 24), - PROPERTY_ENTRY_U32("linux,axis", REL_X), - PROPERTY_ENTRY_U32("rotary-encoder,relative_axis", 1), - { }, -}; - -static struct platform_device rotary_encoder_device = { - .name = "rotary-encoder", - .id = 0, -}; - -/** - * GPIO buttons - */ - -static struct gpio_keys_button gpio_keys_button[] = { - { - .code = KEY_F1, - .type = EV_KEY, - .gpio = GPIO_KEY1, - .active_low = 1, - .wakeup = 0, - .debounce_interval = 5, /* ms */ - .desc = "Button 1", - }, - { - .code = KEY_F2, - .type = EV_KEY, - .gpio = GPIO_KEY2, - .active_low = 1, - .wakeup = 0, - .debounce_interval = 5, /* ms */ - .desc = "Button 2", - }, - { - .code = KEY_F3, - .type = EV_KEY, - .gpio = GPIO_KEY3, - .active_low = 1, - .wakeup = 0, - .debounce_interval = 5, /* ms */ - .desc = "Button 3", - }, - { - .code = KEY_F4, - .type = EV_KEY, - .gpio = GPIO_RESCUE_BOOT, - .active_low = 0, - .wakeup = 0, - .debounce_interval = 5, /* ms */ - .desc = "rescue boot button", - }, - { - .code = KEY_F5, - .type = EV_KEY, - .gpio = GPIO_DOCK_DETECT, - .active_low = 1, - .wakeup = 0, - .debounce_interval = 5, /* ms */ - .desc = "dock detect", - }, - { - .code = KEY_F6, - .type = EV_KEY, - .gpio = GPIO_ON_OFF, - .active_low = 0, - .wakeup = 0, - .debounce_interval = 5, /* ms */ - .desc = "on_off button", - }, -}; - -static struct gpio_keys_platform_data gpio_keys_platform_data = { - .buttons = gpio_keys_button, - .nbuttons = ARRAY_SIZE(gpio_keys_button), - .rep = 0, -}; - -static struct platform_device raumfeld_gpio_keys_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &gpio_keys_platform_data, - } -}; - -/** - * GPIO LEDs - */ - -static struct gpio_led raumfeld_leds[] = { - { - .name = "raumfeld:1", - .gpio = GPIO_LED1, - .active_low = 1, - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, - { - .name = "raumfeld:2", - .gpio = GPIO_LED2, - .active_low = 0, - .default_state = LEDS_GPIO_DEFSTATE_OFF, - } -}; - -static struct gpio_led_platform_data raumfeld_led_platform_data = { - .leds = raumfeld_leds, - .num_leds = ARRAY_SIZE(raumfeld_leds), -}; - -static struct platform_device raumfeld_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &raumfeld_led_platform_data, - }, -}; - -/** - * One-wire (W1 bus) support - */ - -static void w1_enable_external_pullup(int enable) -{ - gpio_set_value(GPIO_W1_PULLUP_ENABLE, enable); - msleep(100); -} - -static struct gpiod_lookup_table raumfeld_w1_gpiod_table = { - .dev_id = "w1-gpio", - .table = { - GPIO_LOOKUP_IDX("gpio-pxa", GPIO_ONE_WIRE, NULL, 0, - GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - }, -}; - -static struct w1_gpio_platform_data w1_gpio_platform_data = { - .enable_external_pullup = w1_enable_external_pullup, -}; - -static struct platform_device raumfeld_w1_gpio_device = { - .name = "w1-gpio", - .dev = { - .platform_data = &w1_gpio_platform_data - } -}; - -static void __init raumfeld_w1_init(void) -{ - int ret = gpio_request(GPIO_W1_PULLUP_ENABLE, - "W1 external pullup enable"); - - if (ret < 0) - pr_warn("Unable to request GPIO_W1_PULLUP_ENABLE\n"); - else - gpio_direction_output(GPIO_W1_PULLUP_ENABLE, 0); - - gpiod_add_lookup_table(&raumfeld_w1_gpiod_table); - platform_device_register(&raumfeld_w1_gpio_device); -} - -/** - * Framebuffer device - */ - -static struct pwm_lookup raumfeld_pwm_lookup[] = { - PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 10000, - PWM_POLARITY_NORMAL), -}; - -/* PWM controlled backlight */ -static struct platform_pwm_backlight_data raumfeld_pwm_backlight_data = { - .max_brightness = 100, - .dft_brightness = 100, - .enable_gpio = -1, -}; - -static struct platform_device raumfeld_pwm_backlight_device = { - .name = "pwm-backlight", - .dev = { - .parent = &pxa27x_device_pwm0.dev, - .platform_data = &raumfeld_pwm_backlight_data, - } -}; - -/* LT3593 controlled backlight */ -static struct gpio_led raumfeld_lt3593_led = { - .name = "backlight", - .gpio = mfp_to_gpio(MFP_PIN_GPIO17), - .default_state = LEDS_GPIO_DEFSTATE_ON, -}; - -static struct gpio_led_platform_data raumfeld_lt3593_platform_data = { - .leds = &raumfeld_lt3593_led, - .num_leds = 1, -}; - -static struct platform_device raumfeld_lt3593_device = { - .name = "leds-lt3593", - .id = -1, - .dev = { - .platform_data = &raumfeld_lt3593_platform_data, - }, -}; - -static struct pxafb_mode_info sharp_lq043t3dx02_mode = { - .pixclock = 111000, - .xres = 480, - .yres = 272, - .bpp = 16, - .hsync_len = 41, - .left_margin = 2, - .right_margin = 1, - .vsync_len = 10, - .upper_margin = 3, - .lower_margin = 1, - .sync = 0, -}; - -static struct pxafb_mach_info raumfeld_sharp_lcd_info = { - .modes = &sharp_lq043t3dx02_mode, - .num_modes = 1, - .video_mem_size = 0x400000, - .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, -#ifdef CONFIG_PXA3XX_GCU - .acceleration_enabled = 1, -#endif -}; - -static void __init raumfeld_lcd_init(void) -{ - int ret; - - ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable"); - if (ret < 0) - pr_warn("Unable to request GPIO_TFT_VA_EN\n"); - else - gpio_direction_output(GPIO_TFT_VA_EN, 1); - - msleep(100); - - ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable"); - if (ret < 0) - pr_warn("Unable to request GPIO_DISPLAY_ENABLE\n"); - else - gpio_direction_output(GPIO_DISPLAY_ENABLE, 1); - - /* Hardware revision 2 has the backlight regulator controlled - * by an LT3593, earlier and later devices use PWM for that. */ - if ((system_rev & 0xff) == 2) { - platform_device_register(&raumfeld_lt3593_device); - } else { - mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT; - pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1); - pwm_add_table(raumfeld_pwm_lookup, - ARRAY_SIZE(raumfeld_pwm_lookup)); - platform_device_register(&raumfeld_pwm_backlight_device); - } - - pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info); - platform_device_register(&pxa3xx_device_gcu); -} - -/** - * SPI devices - */ - -static struct spi_gpio_platform_data raumfeld_spi_platform_data = { - .num_chipselect = 3, -}; - -static struct platform_device raumfeld_spi_device = { - .name = "spi_gpio", - .id = 0, - .dev = { - .platform_data = &raumfeld_spi_platform_data, - } -}; - -static struct gpiod_lookup_table raumfeld_spi_gpiod_table = { - .dev_id = "spi_gpio", - .table = { - GPIO_LOOKUP("gpio-0", GPIO_SPI_CLK, - "sck", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("gpio-0", GPIO_SPI_MOSI, - "mosi", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("gpio-0", GPIO_SPI_MISO, - "miso", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("gpio-0", GPIO_SPDIF_CS, - "cs", 0, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("gpio-0", GPIO_ACCEL_CS, - "cs", 1, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("gpio-0", GPIO_MCLK_DAC_CS, - "cs", 2, GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static struct lis3lv02d_platform_data lis3_pdata = { - .click_flags = LIS3_CLICK_SINGLE_X | - LIS3_CLICK_SINGLE_Y | - LIS3_CLICK_SINGLE_Z, - .irq_cfg = LIS3_IRQ1_CLICK | LIS3_IRQ2_CLICK, - .wakeup_flags = LIS3_WAKEUP_X_LO | LIS3_WAKEUP_X_HI | - LIS3_WAKEUP_Y_LO | LIS3_WAKEUP_Y_HI | - LIS3_WAKEUP_Z_LO | LIS3_WAKEUP_Z_HI, - .wakeup_thresh = 10, - .click_thresh_x = 10, - .click_thresh_y = 10, - .click_thresh_z = 10, -}; - -#define SPI_AK4104 \ -{ \ - .modalias = "ak4104-codec", \ - .max_speed_hz = 10000, \ - .bus_num = 0, \ - .chip_select = 0, \ -} - -#define SPI_LIS3 \ -{ \ - .modalias = "lis3lv02d_spi", \ - .max_speed_hz = 1000000, \ - .bus_num = 0, \ - .chip_select = 1, \ - .platform_data = &lis3_pdata, \ - .irq = PXA_GPIO_TO_IRQ(GPIO_ACCEL_IRQ), \ -} - -#define SPI_DAC7512 \ -{ \ - .modalias = "dac7512", \ - .max_speed_hz = 1000000, \ - .bus_num = 0, \ - .chip_select = 2, \ -} - -static struct spi_board_info connector_spi_devices[] __initdata = { - SPI_AK4104, - SPI_DAC7512, -}; - -static struct spi_board_info speaker_spi_devices[] __initdata = { - SPI_DAC7512, -}; - -static struct spi_board_info controller_spi_devices[] __initdata = { - SPI_LIS3, -}; - -/** - * MMC for Marvell Libertas 8688 via SDIO - */ - -static int raumfeld_mci_init(struct device *dev, irq_handler_t isr, void *data) -{ - gpio_set_value(GPIO_W2W_RESET, 1); - gpio_set_value(GPIO_W2W_PDN, 1); - - return 0; -} - -static void raumfeld_mci_exit(struct device *dev, void *data) -{ - gpio_set_value(GPIO_W2W_RESET, 0); - gpio_set_value(GPIO_W2W_PDN, 0); -} - -static struct pxamci_platform_data raumfeld_mci_platform_data = { - .init = raumfeld_mci_init, - .exit = raumfeld_mci_exit, - .detect_delay_ms = 200, -}; - -/* - * External power / charge logic - */ - -static int power_supply_init(struct device *dev) -{ - return 0; -} - -static void power_supply_exit(struct device *dev) -{ -} - -static int raumfeld_is_ac_online(void) -{ - return !gpio_get_value(GPIO_CHARGE_DC_OK); -} - -static int raumfeld_is_usb_online(void) -{ - return 0; -} - -static char *raumfeld_power_supplicants[] = { "ds2760-battery.0" }; - -static void raumfeld_power_signal_charged(void) -{ - struct power_supply *psy = - power_supply_get_by_name(raumfeld_power_supplicants[0]); - - if (psy) { - power_supply_set_battery_charged(psy); - power_supply_put(psy); - } -} - -static int raumfeld_power_resume(void) -{ - /* check if GPIO_CHARGE_DONE went low while we were sleeping */ - if (!gpio_get_value(GPIO_CHARGE_DONE)) - raumfeld_power_signal_charged(); - - return 0; -} - -static struct pda_power_pdata power_supply_info = { - .init = power_supply_init, - .is_ac_online = raumfeld_is_ac_online, - .is_usb_online = raumfeld_is_usb_online, - .exit = power_supply_exit, - .supplied_to = raumfeld_power_supplicants, - .num_supplicants = ARRAY_SIZE(raumfeld_power_supplicants), - .resume = raumfeld_power_resume, -}; - -static struct resource power_supply_resources[] = { - { - .name = "ac", - .flags = IORESOURCE_IRQ | - IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE, - .start = GPIO_CHARGE_DC_OK, - .end = GPIO_CHARGE_DC_OK, - }, -}; - -static irqreturn_t charge_done_irq(int irq, void *dev_id) -{ - raumfeld_power_signal_charged(); - return IRQ_HANDLED; -} - -static struct platform_device raumfeld_power_supply = { - .name = "pda-power", - .id = -1, - .dev = { - .platform_data = &power_supply_info, - }, - .resource = power_supply_resources, - .num_resources = ARRAY_SIZE(power_supply_resources), -}; - -static void __init raumfeld_power_init(void) -{ - int ret; - - /* Set PEN2 high to enable maximum charge current */ - ret = gpio_request(GPIO_CHRG_PEN2, "CHRG_PEN2"); - if (ret < 0) - pr_warn("Unable to request GPIO_CHRG_PEN2\n"); - else - gpio_direction_output(GPIO_CHRG_PEN2, 1); - - ret = gpio_request(GPIO_CHARGE_DC_OK, "CABLE_DC_OK"); - if (ret < 0) - pr_warn("Unable to request GPIO_CHARGE_DC_OK\n"); - - ret = gpio_request(GPIO_CHARGE_USB_SUSP, "CHARGE_USB_SUSP"); - if (ret < 0) - pr_warn("Unable to request GPIO_CHARGE_USB_SUSP\n"); - else - gpio_direction_output(GPIO_CHARGE_USB_SUSP, 0); - - power_supply_resources[0].start = gpio_to_irq(GPIO_CHARGE_DC_OK); - power_supply_resources[0].end = gpio_to_irq(GPIO_CHARGE_DC_OK); - - ret = request_irq(gpio_to_irq(GPIO_CHARGE_DONE), - &charge_done_irq, IORESOURCE_IRQ_LOWEDGE, - "charge_done", NULL); - - if (ret < 0) - printk(KERN_ERR "%s: unable to register irq %d\n", __func__, - GPIO_CHARGE_DONE); - else - platform_device_register(&raumfeld_power_supply); -} - -/* Fixed regulator for AUDIO_VA, 0-0048 maps to the cs4270 codec device */ - -static struct regulator_consumer_supply audio_va_consumer_supply = - REGULATOR_SUPPLY("va", "0-0048"); - -static struct regulator_init_data audio_va_initdata = { - .consumer_supplies = &audio_va_consumer_supply, - .num_consumer_supplies = 1, - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, -}; - -static struct fixed_voltage_config audio_va_config = { - .supply_name = "audio_va", - .microvolts = 5000000, - .enabled_at_boot = 0, - .init_data = &audio_va_initdata, -}; - -static struct platform_device audio_va_device = { - .name = "reg-fixed-voltage", - .id = 0, - .dev = { - .platform_data = &audio_va_config, - }, -}; - -static struct gpiod_lookup_table audio_va_gpiod_table = { - .dev_id = "reg-fixed-voltage.0", - .table = { - GPIO_LOOKUP("gpio-pxa", GPIO_AUDIO_VA_ENABLE, - NULL, GPIO_ACTIVE_HIGH), - { }, - }, -}; - -/* Dummy supplies for Codec's VD/VLC */ - -static struct regulator_consumer_supply audio_dummy_supplies[] = { - REGULATOR_SUPPLY("vd", "0-0048"), - REGULATOR_SUPPLY("vlc", "0-0048"), -}; - -static struct regulator_init_data audio_dummy_initdata = { - .consumer_supplies = audio_dummy_supplies, - .num_consumer_supplies = ARRAY_SIZE(audio_dummy_supplies), - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, -}; - -static struct fixed_voltage_config audio_dummy_config = { - .supply_name = "audio_vd", - .microvolts = 3300000, - .init_data = &audio_dummy_initdata, -}; - -static struct platform_device audio_supply_dummy_device = { - .name = "reg-fixed-voltage", - .id = 1, - .dev = { - .platform_data = &audio_dummy_config, - }, -}; - -static struct platform_device *audio_regulator_devices[] = { - &audio_va_device, - &audio_supply_dummy_device, -}; - -/** - * Regulator support via MAX8660 - */ - -static struct regulator_consumer_supply vcc_mmc_supply = - REGULATOR_SUPPLY("vmmc", "pxa2xx-mci.0"); - -static struct regulator_init_data vcc_mmc_init_data = { - .constraints = { - .min_uV = 3300000, - .max_uV = 3300000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_MODE, - }, - .consumer_supplies = &vcc_mmc_supply, - .num_consumer_supplies = 1, -}; - -static struct max8660_subdev_data max8660_v6_subdev_data = { - .id = MAX8660_V6, - .name = "vmmc", - .platform_data = &vcc_mmc_init_data, -}; - -static struct max8660_platform_data max8660_pdata = { - .subdevs = &max8660_v6_subdev_data, - .num_subdevs = 1, -}; - -/** - * I2C devices - */ - -static struct i2c_board_info raumfeld_pwri2c_board_info = { - .type = "max8660", - .addr = 0x34, - .platform_data = &max8660_pdata, -}; - -static struct i2c_board_info raumfeld_connector_i2c_board_info __initdata = { - .type = "cs4270", - .addr = 0x48, -}; - -static struct gpiod_lookup_table raumfeld_controller_gpios_table = { - .dev_id = "0-000a", - .table = { - GPIO_LOOKUP("gpio-pxa", - GPIO_TOUCH_IRQ, "attn", GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static const struct resource raumfeld_controller_resources[] __initconst = { - { - .start = PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ), - .end = PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ), - .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH, - }, -}; - -static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = { - .type = "eeti_ts", - .addr = 0x0a, - .resources = raumfeld_controller_resources, - .num_resources = ARRAY_SIZE(raumfeld_controller_resources), -}; - -static struct platform_device *raumfeld_common_devices[] = { - &raumfeld_gpio_keys_device, - &raumfeld_led_device, - &raumfeld_spi_device, -}; - -static void __init raumfeld_audio_init(void) -{ - int ret; - - ret = gpio_request(GPIO_CODEC_RESET, "cs4270 reset"); - if (ret < 0) - pr_warn("unable to request GPIO_CODEC_RESET\n"); - else - gpio_direction_output(GPIO_CODEC_RESET, 1); - - ret = gpio_request(GPIO_SPDIF_RESET, "ak4104 s/pdif reset"); - if (ret < 0) - pr_warn("unable to request GPIO_SPDIF_RESET\n"); - else - gpio_direction_output(GPIO_SPDIF_RESET, 1); - - ret = gpio_request(GPIO_MCLK_RESET, "MCLK reset"); - if (ret < 0) - pr_warn("unable to request GPIO_MCLK_RESET\n"); - else - gpio_direction_output(GPIO_MCLK_RESET, 1); - - gpiod_add_lookup_table(&audio_va_gpiod_table); - platform_add_devices(ARRAY_AND_SIZE(audio_regulator_devices)); -} - -static void __init raumfeld_common_init(void) -{ - int ret; - - /* The on/off button polarity has changed after revision 1 */ - if ((system_rev & 0xff) > 1) { - int i; - - for (i = 0; i < ARRAY_SIZE(gpio_keys_button); i++) - if (!strcmp(gpio_keys_button[i].desc, "on_off button")) - gpio_keys_button[i].active_low = 1; - } - - enable_irq_wake(IRQ_WAKEUP0); - - pxa3xx_set_nand_info(&raumfeld_nand_info); - pxa3xx_set_i2c_power_info(NULL); - pxa_set_ohci_info(&raumfeld_ohci_info); - pxa_set_mci_info(&raumfeld_mci_platform_data); - pxa_set_i2c_info(NULL); - pxa_set_ffuart_info(NULL); - - ret = gpio_request(GPIO_W2W_RESET, "Wi2Wi reset"); - if (ret < 0) - pr_warn("Unable to request GPIO_W2W_RESET\n"); - else - gpio_direction_output(GPIO_W2W_RESET, 0); - - ret = gpio_request(GPIO_W2W_PDN, "Wi2Wi powerup"); - if (ret < 0) - pr_warn("Unable to request GPIO_W2W_PDN\n"); - else - gpio_direction_output(GPIO_W2W_PDN, 0); - - /* this can be used to switch off the device */ - ret = gpio_request(GPIO_SHUTDOWN_SUPPLY, "supply shutdown"); - if (ret < 0) - pr_warn("Unable to request GPIO_SHUTDOWN_SUPPLY\n"); - else - gpio_direction_output(GPIO_SHUTDOWN_SUPPLY, 0); - - gpiod_add_lookup_table(&raumfeld_spi_gpiod_table); - platform_add_devices(ARRAY_AND_SIZE(raumfeld_common_devices)); - i2c_register_board_info(1, &raumfeld_pwri2c_board_info, 1); -} - -static void __init __maybe_unused raumfeld_controller_init(void) -{ - int ret; - - pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_controller_pin_config)); - - gpiod_add_lookup_table(&raumfeld_rotary_gpios_table); - device_add_properties(&rotary_encoder_device.dev, - raumfeld_rotary_properties); - platform_device_register(&rotary_encoder_device); - - spi_register_board_info(ARRAY_AND_SIZE(controller_spi_devices)); - - gpiod_add_lookup_table(&raumfeld_controller_gpios_table); - i2c_register_board_info(0, &raumfeld_controller_i2c_board_info, 1); - - ret = gpio_request(GPIO_SHUTDOWN_BATT, "battery shutdown"); - if (ret < 0) - pr_warn("Unable to request GPIO_SHUTDOWN_BATT\n"); - else - gpio_direction_output(GPIO_SHUTDOWN_BATT, 0); - - raumfeld_common_init(); - raumfeld_power_init(); - raumfeld_lcd_init(); - raumfeld_w1_init(); -} - -static void __init __maybe_unused raumfeld_connector_init(void) -{ - pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_connector_pin_config)); - spi_register_board_info(ARRAY_AND_SIZE(connector_spi_devices)); - i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1); - - platform_device_register(&smc91x_device); - - raumfeld_audio_init(); - raumfeld_common_init(); -} - -static void __init __maybe_unused raumfeld_speaker_init(void) -{ - pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_speaker_pin_config)); - spi_register_board_info(ARRAY_AND_SIZE(speaker_spi_devices)); - i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1); - - platform_device_register(&smc91x_device); - - gpiod_add_lookup_table(&raumfeld_rotary_gpios_table); - device_add_properties(&rotary_encoder_device.dev, - raumfeld_rotary_properties); - platform_device_register(&rotary_encoder_device); - - raumfeld_audio_init(); - raumfeld_common_init(); -} - -/* physical memory regions */ -#define RAUMFELD_SDRAM_BASE 0xa0000000 /* SDRAM region */ - -#ifdef CONFIG_MACH_RAUMFELD_RC -MACHINE_START(RAUMFELD_RC, "Raumfeld Controller") - .atag_offset = 0x100, - .init_machine = raumfeld_controller_init, - .map_io = pxa3xx_map_io, - .nr_irqs = PXA_NR_IRQS, - .init_irq = pxa3xx_init_irq, - .handle_irq = pxa3xx_handle_irq, - .init_time = pxa_timer_init, - .restart = pxa_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_RAUMFELD_CONNECTOR -MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector") - .atag_offset = 0x100, - .init_machine = raumfeld_connector_init, - .map_io = pxa3xx_map_io, - .nr_irqs = PXA_NR_IRQS, - .init_irq = pxa3xx_init_irq, - .handle_irq = pxa3xx_handle_irq, - .init_time = pxa_timer_init, - .restart = pxa_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_RAUMFELD_SPEAKER -MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker") - .atag_offset = 0x100, - .init_machine = raumfeld_speaker_init, - .map_io = pxa3xx_map_io, - .nr_irqs = PXA_NR_IRQS, - .init_irq = pxa3xx_init_irq, - .handle_irq = pxa3xx_handle_irq, - .init_time = pxa_timer_init, - .restart = pxa_restart, -MACHINE_END -#endif diff --git a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c index 058ce73137e8..5d819b6ea428 100644 --- a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c +++ b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c @@ -65,16 +65,16 @@ static int osiris_dvs_notify(struct notifier_block *nb, switch (val) { case CPUFREQ_PRECHANGE: - if (old_dvs & !new_dvs || - cur_dvs & !new_dvs) { + if ((old_dvs && !new_dvs) || + (cur_dvs && !new_dvs)) { pr_debug("%s: exiting dvs\n", __func__); cur_dvs = false; gpio_set_value(OSIRIS_GPIO_DVS, 1); } break; case CPUFREQ_POSTCHANGE: - if (!old_dvs & new_dvs || - !cur_dvs & new_dvs) { + if ((!old_dvs && new_dvs) || + (!cur_dvs && new_dvs)) { pr_debug("entering dvs\n"); cur_dvs = true; gpio_set_value(OSIRIS_GPIO_DVS, 0); diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c index 8e50daa99151..dc526ef2e9b3 100644 --- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c +++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c @@ -40,6 +40,7 @@ struct regulator_quirk { struct list_head list; const struct of_device_id *id; + struct device_node *np; struct of_phandle_args irq_args; struct i2c_msg i2c_msg; bool shared; /* IRQ line is shared */ @@ -101,6 +102,9 @@ static int regulator_quirk_notify(struct notifier_block *nb, if (!pos->shared) continue; + if (pos->np->parent != client->dev.parent->of_node) + continue; + dev_info(&client->dev, "clearing %s@0x%02x interrupts\n", pos->id->compatible, pos->i2c_msg.addr); @@ -165,6 +169,7 @@ static int __init rcar_gen2_regulator_quirk(void) memcpy(&quirk->i2c_msg, id->data, sizeof(quirk->i2c_msg)); quirk->id = id; + quirk->np = np; quirk->i2c_msg.addr = addr; ret = of_irq_parse_one(np, 0, argsa); diff --git a/arch/arm/mach-tegra/iomap.h b/arch/arm/mach-tegra/iomap.h index 9e5b2f869fc8..9bc291e76887 100644 --- a/arch/arm/mach-tegra/iomap.h +++ b/arch/arm/mach-tegra/iomap.h @@ -79,15 +79,24 @@ #define TEGRA_PMC_BASE 0x7000E400 #define TEGRA_PMC_SIZE SZ_256 +#define TEGRA_MC_BASE 0x7000F000 +#define TEGRA_MC_SIZE SZ_1K + #define TEGRA_EMC_BASE 0x7000F400 #define TEGRA_EMC_SIZE SZ_1K +#define TEGRA114_MC_BASE 0x70019000 +#define TEGRA114_MC_SIZE SZ_4K + #define TEGRA_EMC0_BASE 0x7001A000 #define TEGRA_EMC0_SIZE SZ_2K #define TEGRA_EMC1_BASE 0x7001A800 #define TEGRA_EMC1_SIZE SZ_2K +#define TEGRA124_MC_BASE 0x70019000 +#define TEGRA124_MC_SIZE SZ_4K + #define TEGRA124_EMC_BASE 0x7001B000 #define TEGRA124_EMC_SIZE SZ_2K diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S index 5c8e638ee51a..dedeebfccc55 100644 --- a/arch/arm/mach-tegra/sleep-tegra20.S +++ b/arch/arm/mach-tegra/sleep-tegra20.S @@ -32,7 +32,6 @@ #define EMC_CFG 0xc #define EMC_ADR_CFG 0x10 -#define EMC_REFRESH 0x70 #define EMC_NOP 0xdc #define EMC_SELF_REF 0xe0 #define EMC_REQ_CTRL 0x2b0 @@ -397,7 +396,6 @@ padload_done: mov r1, #1 str r1, [r0, #EMC_NOP] str r1, [r0, #EMC_NOP] - str r1, [r0, #EMC_REFRESH] emc_device_mask r1, r0 diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S index dd4a67dabd91..d0b4c486ddbf 100644 --- a/arch/arm/mach-tegra/sleep-tegra30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -29,7 +29,6 @@ #define EMC_CFG 0xc #define EMC_ADR_CFG 0x10 #define EMC_TIMING_CONTROL 0x28 -#define EMC_REFRESH 0x70 #define EMC_NOP 0xdc #define EMC_SELF_REF 0xe0 #define EMC_MRW 0xe8 @@ -45,6 +44,8 @@ #define EMC_XM2VTTGENPADCTRL 0x310 #define EMC_XM2VTTGENPADCTRL2 0x314 +#define MC_EMEM_ARB_CFG 0x90 + #define PMC_CTRL 0x0 #define PMC_CTRL_SIDE_EFFECT_LP0 (1 << 14) /* enter LP0 when CPU pwr gated */ @@ -419,6 +420,22 @@ _pll_m_c_x_done: movweq r0, #:lower16:TEGRA124_EMC_BASE movteq r0, #:upper16:TEGRA124_EMC_BASE + cmp r10, #TEGRA30 + moveq r2, #0x20 + movweq r4, #:lower16:TEGRA_MC_BASE + movteq r4, #:upper16:TEGRA_MC_BASE + cmp r10, #TEGRA114 + moveq r2, #0x34 + movweq r4, #:lower16:TEGRA114_MC_BASE + movteq r4, #:upper16:TEGRA114_MC_BASE + cmp r10, #TEGRA124 + moveq r2, #0x20 + movweq r4, #:lower16:TEGRA124_MC_BASE + movteq r4, #:upper16:TEGRA124_MC_BASE + + ldr r1, [r5, r2] @ restore MC_EMEM_ARB_CFG + str r1, [r4, #MC_EMEM_ARB_CFG] + exit_self_refresh: ldr r1, [r5, #0xC] @ restore EMC_XM2VTTGENPADCTRL str r1, [r0, #EMC_XM2VTTGENPADCTRL] @@ -459,7 +476,6 @@ emc_wait_auto_cal_onetime: cmp r10, #TEGRA30 streq r1, [r0, #EMC_NOP] streq r1, [r0, #EMC_NOP] - streq r1, [r0, #EMC_REFRESH] emc_device_mask r1, r0 @@ -521,6 +537,8 @@ zcal_done: ldr r1, [r5, #0x0] @ restore EMC_CFG str r1, [r0, #EMC_CFG] + emc_timing_update r1, r0 + /* Tegra114 had dual EMC channel, now config the other one */ cmp r10, #TEGRA114 bne __no_dual_emc_chanl @@ -546,6 +564,7 @@ tegra30_sdram_pad_address: .word TEGRA_PMC_BASE + PMC_IO_DPD_STATUS @0x14 .word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18 .word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c + .word TEGRA_MC_BASE + MC_EMEM_ARB_CFG @0x20 tegra30_sdram_pad_address_end: tegra114_sdram_pad_address: @@ -562,6 +581,7 @@ tegra114_sdram_pad_address: .word TEGRA_EMC1_BASE + EMC_AUTO_CAL_INTERVAL @0x28 .word TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL @0x2c .word TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL2 @0x30 + .word TEGRA114_MC_BASE + MC_EMEM_ARB_CFG @0x34 tegra114_sdram_pad_adress_end: tegra124_sdram_pad_address: @@ -573,6 +593,7 @@ tegra124_sdram_pad_address: .word TEGRA_PMC_BASE + PMC_IO_DPD_STATUS @0x14 .word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18 .word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c + .word TEGRA124_MC_BASE + MC_EMEM_ARB_CFG @0x20 tegra124_sdram_pad_address_end: tegra30_sdram_pad_size: diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 251ecf34cb02..a231815f549b 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -112,12 +112,13 @@ config ARCH_MESON bool "Amlogic Platforms" select PINCTRL select PINCTRL_MESON - select COMMON_CLK_AMLOGIC select COMMON_CLK_GXBB select COMMON_CLK_AXG + select COMMON_CLK_G12A select MESON_IRQ_GPIO help - This enables support for the Amlogic S905 SoCs. + This enables support for the arm64 based Amlogic SoCs + such as the s905, S905X/D, S912, A113X/D or S905X/D2 config ARCH_MVEBU bool "Marvell EBU SoC Family" @@ -146,6 +147,10 @@ config ARCH_MXC bool "ARMv8 based NXP i.MX SoC family" select ARM64_ERRATUM_843419 select ARM64_ERRATUM_845719 + select IMX_GPCV2 + select IMX_GPCV2_PM_DOMAINS + select PM + select PM_GENERIC_DOMAINS help This enables support for the ARMv8 based SoCs in the NXP i.MX family. |