aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/ata/pata_pdc2027x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_pdc2027x.c')
-rw-r--r--drivers/ata/pata_pdc2027x.c63
1 files changed, 31 insertions, 32 deletions
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 1c106b866c79..2ff91bbbab06 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -45,6 +45,8 @@
#endif
enum {
+ PDC_MMIO_BAR = 5,
+
PDC_UDMA_100 = 0,
PDC_UDMA_133 = 1,
@@ -158,7 +160,7 @@ static struct ata_port_operations pdc2027x_pata100_ops = {
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_mmio_data_xfer,
+ .data_xfer = ata_data_xfer,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
@@ -190,7 +192,7 @@ static struct ata_port_operations pdc2027x_pata133_ops = {
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_mmio_data_xfer,
+ .data_xfer = ata_data_xfer,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
@@ -239,7 +241,7 @@ MODULE_DEVICE_TABLE(pci, pdc2027x_pci_tbl);
*/
static inline void __iomem *port_mmio(struct ata_port *ap, unsigned int offset)
{
- return ap->host->mmio_base + ap->port_no * 0x100 + offset;
+ return ap->host->iomap[PDC_MMIO_BAR] + ap->port_no * 0x100 + offset;
}
/**
@@ -520,18 +522,19 @@ static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc)
static long pdc_read_counter(struct ata_probe_ent *probe_ent)
{
+ void __iomem *mmio_base = probe_ent->iomap[PDC_MMIO_BAR];
long counter;
int retry = 1;
u32 bccrl, bccrh, bccrlv, bccrhv;
retry:
- bccrl = readl(probe_ent->mmio_base + PDC_BYTE_COUNT) & 0xffff;
- bccrh = readl(probe_ent->mmio_base + PDC_BYTE_COUNT + 0x100) & 0xffff;
+ bccrl = readl(mmio_base + PDC_BYTE_COUNT) & 0xffff;
+ bccrh = readl(mmio_base + PDC_BYTE_COUNT + 0x100) & 0xffff;
rmb();
/* Read the counter values again for verification */
- bccrlv = readl(probe_ent->mmio_base + PDC_BYTE_COUNT) & 0xffff;
- bccrhv = readl(probe_ent->mmio_base + PDC_BYTE_COUNT + 0x100) & 0xffff;
+ bccrlv = readl(mmio_base + PDC_BYTE_COUNT) & 0xffff;
+ bccrhv = readl(mmio_base + PDC_BYTE_COUNT + 0x100) & 0xffff;
rmb();
counter = (bccrh << 15) | bccrl;
@@ -562,7 +565,7 @@ retry:
*/
static void pdc_adjust_pll(struct ata_probe_ent *probe_ent, long pll_clock, unsigned int board_idx)
{
-
+ void __iomem *mmio_base = probe_ent->iomap[PDC_MMIO_BAR];
u16 pll_ctl;
long pll_clock_khz = pll_clock / 1000;
long pout_required = board_idx? PDC_133_MHZ:PDC_100_MHZ;
@@ -581,7 +584,7 @@ static void pdc_adjust_pll(struct ata_probe_ent *probe_ent, long pll_clock, unsi
/* Show the current clock value of PLL control register
* (maybe already configured by the firmware)
*/
- pll_ctl = readw(probe_ent->mmio_base + PDC_PLL_CTL);
+ pll_ctl = readw(mmio_base + PDC_PLL_CTL);
PDPRINTK("pll_ctl[%X]\n", pll_ctl);
#endif
@@ -621,8 +624,8 @@ static void pdc_adjust_pll(struct ata_probe_ent *probe_ent, long pll_clock, unsi
PDPRINTK("Writing pll_ctl[%X]\n", pll_ctl);
- writew(pll_ctl, probe_ent->mmio_base + PDC_PLL_CTL);
- readw(probe_ent->mmio_base + PDC_PLL_CTL); /* flush */
+ writew(pll_ctl, mmio_base + PDC_PLL_CTL);
+ readw(mmio_base + PDC_PLL_CTL); /* flush */
/* Wait the PLL circuit to be stable */
mdelay(30);
@@ -632,7 +635,7 @@ static void pdc_adjust_pll(struct ata_probe_ent *probe_ent, long pll_clock, unsi
* Show the current clock value of PLL control register
* (maybe configured by the firmware)
*/
- pll_ctl = readw(probe_ent->mmio_base + PDC_PLL_CTL);
+ pll_ctl = readw(mmio_base + PDC_PLL_CTL);
PDPRINTK("pll_ctl[%X]\n", pll_ctl);
#endif
@@ -648,6 +651,7 @@ static void pdc_adjust_pll(struct ata_probe_ent *probe_ent, long pll_clock, unsi
*/
static long pdc_detect_pll_input_clock(struct ata_probe_ent *probe_ent)
{
+ void __iomem *mmio_base = probe_ent->iomap[PDC_MMIO_BAR];
u32 scr;
long start_count, end_count;
long pll_clock;
@@ -656,10 +660,10 @@ static long pdc_detect_pll_input_clock(struct ata_probe_ent *probe_ent)
start_count = pdc_read_counter(probe_ent);
/* Start the test mode */
- scr = readl(probe_ent->mmio_base + PDC_SYS_CTL);
+ scr = readl(mmio_base + PDC_SYS_CTL);
PDPRINTK("scr[%X]\n", scr);
- writel(scr | (0x01 << 14), probe_ent->mmio_base + PDC_SYS_CTL);
- readl(probe_ent->mmio_base + PDC_SYS_CTL); /* flush */
+ writel(scr | (0x01 << 14), mmio_base + PDC_SYS_CTL);
+ readl(mmio_base + PDC_SYS_CTL); /* flush */
/* Let the counter run for 100 ms. */
mdelay(100);
@@ -668,10 +672,10 @@ static long pdc_detect_pll_input_clock(struct ata_probe_ent *probe_ent)
end_count = pdc_read_counter(probe_ent);
/* Stop the test mode */
- scr = readl(probe_ent->mmio_base + PDC_SYS_CTL);
+ scr = readl(mmio_base + PDC_SYS_CTL);
PDPRINTK("scr[%X]\n", scr);
- writel(scr & ~(0x01 << 14), probe_ent->mmio_base + PDC_SYS_CTL);
- readl(probe_ent->mmio_base + PDC_SYS_CTL); /* flush */
+ writel(scr & ~(0x01 << 14), mmio_base + PDC_SYS_CTL);
+ readl(mmio_base + PDC_SYS_CTL); /* flush */
/* calculate the input clock in Hz */
pll_clock = (start_count - end_count) * 10;
@@ -716,7 +720,7 @@ static int pdc_hardware_init(struct pci_dev *pdev, struct ata_probe_ent *pe, uns
* @port: ata ioports to setup
* @base: base address
*/
-static void pdc_ata_setup_port(struct ata_ioports *port, unsigned long base)
+static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base)
{
port->cmd_addr =
port->data_addr = base;
@@ -750,7 +754,6 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de
unsigned int board_idx = (unsigned int) ent->driver_data;
struct ata_probe_ent *probe_ent;
- unsigned long base;
void __iomem *mmio_base;
int rc;
@@ -761,7 +764,7 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de
if (rc)
return rc;
- rc = pci_request_regions(pdev, DRV_NAME);
+ rc = pcim_iomap_regions(pdev, 1 << PDC_MMIO_BAR, DRV_NAME);
if (rc)
return rc;
@@ -781,12 +784,6 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de
probe_ent->dev = pci_dev_to_dev(pdev);
INIT_LIST_HEAD(&probe_ent->node);
- mmio_base = pcim_iomap(pdev, 5, 0);
- if (!mmio_base)
- return -ENOMEM;
-
- base = (unsigned long) mmio_base;
-
probe_ent->sht = pdc2027x_port_info[board_idx].sht;
probe_ent->port_flags = pdc2027x_port_info[board_idx].flags;
probe_ent->pio_mask = pdc2027x_port_info[board_idx].pio_mask;
@@ -796,12 +793,14 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de
probe_ent->irq = pdev->irq;
probe_ent->irq_flags = SA_SHIRQ;
- probe_ent->mmio_base = mmio_base;
+ probe_ent->iomap = pcim_iomap_table(pdev);
+
+ mmio_base = probe_ent->iomap[PDC_MMIO_BAR];
- pdc_ata_setup_port(&probe_ent->port[0], base + 0x17c0);
- probe_ent->port[0].bmdma_addr = base + 0x1000;
- pdc_ata_setup_port(&probe_ent->port[1], base + 0x15c0);
- probe_ent->port[1].bmdma_addr = base + 0x1008;
+ pdc_ata_setup_port(&probe_ent->port[0], mmio_base + 0x17c0);
+ probe_ent->port[0].bmdma_addr = mmio_base + 0x1000;
+ pdc_ata_setup_port(&probe_ent->port[1], mmio_base + 0x15c0);
+ probe_ent->port[1].bmdma_addr = mmio_base + 0x1008;
probe_ent->n_ports = 2;
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.