aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/ata
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata')
-rw-r--r--drivers/ata/Kconfig4
-rw-r--r--drivers/ata/ahci.c101
-rw-r--r--drivers/ata/ata_generic.c6
-rw-r--r--drivers/ata/libata-core.c17
-rw-r--r--drivers/ata/libata-eh.c2
-rw-r--r--drivers/ata/libata-scsi.c62
-rw-r--r--drivers/ata/libata-sff.c21
-rw-r--r--drivers/ata/pata_atiixp.c11
-rw-r--r--drivers/ata/pata_cmd64x.c23
-rw-r--r--drivers/ata/pata_hpt3x2n.c6
-rw-r--r--drivers/ata/pata_it821x.c4
-rw-r--r--drivers/ata/pata_ixp4xx_cf.c5
-rw-r--r--drivers/ata/pata_jmicron.c18
-rw-r--r--drivers/ata/pata_legacy.c4
-rw-r--r--drivers/ata/pata_platform.c3
-rw-r--r--drivers/ata/pata_rz1000.c6
-rw-r--r--drivers/ata/pata_sil680.c2
-rw-r--r--drivers/ata/pata_via.c4
-rw-r--r--drivers/ata/sata_nv.c14
-rw-r--r--drivers/ata/sata_uli.c3
-rw-r--r--drivers/ata/sata_via.c12
21 files changed, 210 insertions, 118 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index da21552d2b1c..1c94b43d2c9b 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -19,6 +19,10 @@ config ATA
if ATA
+config ATA_NONSTANDARD
+ bool
+ default n
+
config SATA_AHCI
tristate "AHCI SATA support"
depends on PCI
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index b517d2493551..48616c6fee9d 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -75,6 +75,7 @@ enum {
AHCI_CMD_CLR_BUSY = (1 << 10),
RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */
+ RX_FIS_SDB = 0x58, /* offset of SDB FIS data */
RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */
board_ahci = 0,
@@ -202,6 +203,10 @@ struct ahci_port_priv {
dma_addr_t cmd_tbl_dma;
void *rx_fis;
dma_addr_t rx_fis_dma;
+ /* for NCQ spurious interrupt analysis */
+ int ncq_saw_spurious_sdb_cnt;
+ unsigned int ncq_saw_d2h:1;
+ unsigned int ncq_saw_dmas:1;
};
static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg);
@@ -361,7 +366,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, 0x27c1), board_ahci }, /* ICH7 */
{ PCI_VDEVICE(INTEL, 0x27c5), board_ahci }, /* ICH7M */
{ PCI_VDEVICE(INTEL, 0x27c3), board_ahci }, /* ICH7R */
- { PCI_VDEVICE(AL, 0x5288), board_ahci }, /* ULi M5288 */
+ { PCI_VDEVICE(AL, 0x5288), board_ahci_ign_iferr }, /* ULi M5288 */
{ PCI_VDEVICE(INTEL, 0x2681), board_ahci }, /* ESB2 */
{ PCI_VDEVICE(INTEL, 0x2682), board_ahci }, /* ESB2 */
{ PCI_VDEVICE(INTEL, 0x2683), board_ahci }, /* ESB2 */
@@ -586,35 +591,18 @@ static void ahci_power_down(void __iomem *port_mmio, u32 cap)
{
u32 cmd, scontrol;
- cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
-
- if (cap & HOST_CAP_SSC) {
- /* enable transitions to slumber mode */
- scontrol = readl(port_mmio + PORT_SCR_CTL);
- if ((scontrol & 0x0f00) > 0x100) {
- scontrol &= ~0xf00;
- writel(scontrol, port_mmio + PORT_SCR_CTL);
- }
-
- /* put device into slumber mode */
- writel(cmd | PORT_CMD_ICC_SLUMBER, port_mmio + PORT_CMD);
-
- /* wait for the transition to complete */
- ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_ICC_SLUMBER,
- PORT_CMD_ICC_SLUMBER, 1, 50);
- }
+ if (!(cap & HOST_CAP_SSS))
+ return;
- /* put device into listen mode */
- if (cap & HOST_CAP_SSS) {
- /* first set PxSCTL.DET to 0 */
- scontrol = readl(port_mmio + PORT_SCR_CTL);
- scontrol &= ~0xf;
- writel(scontrol, port_mmio + PORT_SCR_CTL);
+ /* put device into listen mode, first set PxSCTL.DET to 0 */
+ scontrol = readl(port_mmio + PORT_SCR_CTL);
+ scontrol &= ~0xf;
+ writel(scontrol, port_mmio + PORT_SCR_CTL);
- /* then set PxCMD.SUD to 0 */
- cmd &= ~PORT_CMD_SPIN_UP;
- writel(cmd, port_mmio + PORT_CMD);
- }
+ /* then set PxCMD.SUD to 0 */
+ cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
+ cmd &= ~PORT_CMD_SPIN_UP;
+ writel(cmd, port_mmio + PORT_CMD);
}
static void ahci_init_port(void __iomem *port_mmio, u32 cap,
@@ -915,7 +903,7 @@ static int ahci_hardreset(struct ata_port *ap, unsigned int *class)
/* clear D2H reception area to properly wait for D2H FIS */
ata_tf_init(ap->device, &tf);
- tf.command = 0xff;
+ tf.command = 0x80;
ata_tf_to_fis(&tf, d2h_fis, 0);
rc = sata_std_hardreset(ap, class);
@@ -1126,8 +1114,9 @@ static void ahci_host_intr(struct ata_port *ap)
void __iomem *mmio = ap->host->mmio_base;
void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
struct ata_eh_info *ehi = &ap->eh_info;
+ struct ahci_port_priv *pp = ap->private_data;
u32 status, qc_active;
- int rc;
+ int rc, known_irq = 0;
status = readl(port_mmio + PORT_IRQ_STAT);
writel(status, port_mmio + PORT_IRQ_STAT);
@@ -1154,17 +1143,53 @@ static void ahci_host_intr(struct ata_port *ap)
/* hmmm... a spurious interupt */
- /* some devices send D2H reg with I bit set during NCQ command phase */
- if (ap->sactive && (status & PORT_IRQ_D2H_REG_FIS))
+ /* if !NCQ, ignore. No modern ATA device has broken HSM
+ * implementation for non-NCQ commands.
+ */
+ if (!ap->sactive)
return;
- /* ignore interim PIO setup fis interrupts */
- if (ata_tag_valid(ap->active_tag) && (status & PORT_IRQ_PIOS_FIS))
- return;
+ if (status & PORT_IRQ_D2H_REG_FIS) {
+ if (!pp->ncq_saw_d2h)
+ ata_port_printk(ap, KERN_INFO,
+ "D2H reg with I during NCQ, "
+ "this message won't be printed again\n");
+ pp->ncq_saw_d2h = 1;
+ known_irq = 1;
+ }
+
+ if (status & PORT_IRQ_DMAS_FIS) {
+ if (!pp->ncq_saw_dmas)
+ ata_port_printk(ap, KERN_INFO,
+ "DMAS FIS during NCQ, "
+ "this message won't be printed again\n");
+ pp->ncq_saw_dmas = 1;
+ known_irq = 1;
+ }
+
+ if (status & PORT_IRQ_SDB_FIS &&
+ pp->ncq_saw_spurious_sdb_cnt < 10) {
+ /* SDB FIS containing spurious completions might be
+ * dangerous, we need to know more about them. Print
+ * more of it.
+ */
+ const u32 *f = pp->rx_fis + RX_FIS_SDB;
+
+ ata_port_printk(ap, KERN_INFO, "Spurious SDB FIS during NCQ "
+ "issue=0x%x SAct=0x%x FIS=%08x:%08x%s\n",
+ readl(port_mmio + PORT_CMD_ISSUE),
+ readl(port_mmio + PORT_SCR_ACT),
+ le32_to_cpu(f[0]), le32_to_cpu(f[1]),
+ pp->ncq_saw_spurious_sdb_cnt < 10 ?
+ "" : ", shutting up");
+
+ pp->ncq_saw_spurious_sdb_cnt++;
+ known_irq = 1;
+ }
- if (ata_ratelimit())
+ if (!known_irq)
ata_port_printk(ap, KERN_INFO, "spurious interrupt "
- "(irq_stat 0x%x active_tag %d sactive 0x%x)\n",
+ "(irq_stat 0x%x active_tag 0x%x sactive 0x%x)\n",
status, ap->active_tag, ap->sactive);
}
@@ -1257,7 +1282,7 @@ static void ahci_thaw(struct ata_port *ap)
/* clear IRQ */
tmp = readl(port_mmio + PORT_IRQ_STAT);
writel(tmp, port_mmio + PORT_IRQ_STAT);
- writel(1 << ap->id, mmio + HOST_IRQ_STAT);
+ writel(1 << ap->port_no, mmio + HOST_IRQ_STAT);
/* turn IRQ back on */
writel(DEF_PORT_IRQ, port_mmio + PORT_IRQ_MASK);
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 908751d27e76..24af56081b5d 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -64,6 +64,7 @@ static void generic_error_handler(struct ata_port *ap)
/**
* generic_set_mode - mode setting
* @ap: interface to set up
+ * @unused: returned device on error
*
* Use a non standard set_mode function. We don't want to be tuned.
* The BIOS configured everything. Our job is not to fiddle. We
@@ -71,7 +72,7 @@ static void generic_error_handler(struct ata_port *ap)
* and respect them.
*/
-static void generic_set_mode(struct ata_port *ap)
+static int generic_set_mode(struct ata_port *ap, struct ata_device **unused)
{
int dma_enabled = 0;
int i;
@@ -82,7 +83,7 @@ static void generic_set_mode(struct ata_port *ap)
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
- if (ata_dev_enabled(dev)) {
+ if (ata_dev_ready(dev)) {
/* We don't really care */
dev->pio_mode = XFER_PIO_0;
dev->dma_mode = XFER_MW_DMA_0;
@@ -99,6 +100,7 @@ static void generic_set_mode(struct ata_port *ap)
}
}
}
+ return 0;
}
static struct scsi_host_template generic_sht = {
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 0d51d13b16bf..667acd283364 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1037,7 +1037,7 @@ static unsigned int ata_id_xfermask(const u16 *id)
* the PIO timing number for the maximum. Turn it into
* a mask.
*/
- u8 mode = id[ATA_ID_OLD_PIO_MODES] & 0xFF;
+ u8 mode = (id[ATA_ID_OLD_PIO_MODES] >> 8) & 0xFF;
if (mode < 5) /* Valid PIO range */
pio_mask = (2 << mode) - 1;
else
@@ -1250,6 +1250,7 @@ unsigned ata_exec_internal_sg(struct ata_device *dev,
ata_sg_init(qc, sg, n_elem);
qc->nsect = buflen / ATA_SECT_SIZE;
+ qc->nbytes = buflen;
}
qc->private_data = &wait;
@@ -2431,18 +2432,8 @@ int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev)
int i, rc = 0, used_dma = 0, found = 0;
/* has private set_mode? */
- if (ap->ops->set_mode) {
- /* FIXME: make ->set_mode handle no device case and
- * return error code and failing device on failure.
- */
- for (i = 0; i < ATA_MAX_DEVICES; i++) {
- if (ata_dev_ready(&ap->device[i])) {
- ap->ops->set_mode(ap);
- break;
- }
- }
- return 0;
- }
+ if (ap->ops->set_mode)
+ return ap->ops->set_mode(ap, r_failed_dev);
/* step 1: calculate xfer_mask */
for (i = 0; i < ATA_MAX_DEVICES; i++) {
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 56cf59b60ec4..748435807d68 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1796,7 +1796,7 @@ static int ata_eh_suspend(struct ata_port *ap, struct ata_device **r_failed_dev)
*r_failed_dev = dev;
DPRINTK("EXIT\n");
- return 0;
+ return rc;
}
/**
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 836947da5b14..73902d335767 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -273,8 +273,8 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg)
{
int rc = 0;
u8 scsi_cmd[MAX_COMMAND_SIZE];
- u8 args[7];
- struct scsi_sense_hdr sshdr;
+ u8 args[7], *sensebuf = NULL;
+ int cmd_result;
if (arg == NULL)
return -EINVAL;
@@ -282,10 +282,14 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg)
if (copy_from_user(args, arg, sizeof(args)))
return -EFAULT;
+ sensebuf = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_NOIO);
+ if (!sensebuf)
+ return -ENOMEM;
+
memset(scsi_cmd, 0, sizeof(scsi_cmd));
scsi_cmd[0] = ATA_16;
scsi_cmd[1] = (3 << 1); /* Non-data */
- /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */
+ scsi_cmd[2] = 0x20; /* cc but no off.line or data xfer */
scsi_cmd[4] = args[1];
scsi_cmd[6] = args[2];
scsi_cmd[8] = args[3];
@@ -295,11 +299,46 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg)
/* Good values for timeout and retries? Values below
from scsi_ioctl_send_command() for default case... */
- if (scsi_execute_req(scsidev, scsi_cmd, DMA_NONE, NULL, 0, &sshdr,
- (10*HZ), 5))
+ cmd_result = scsi_execute(scsidev, scsi_cmd, DMA_NONE, NULL, 0,
+ sensebuf, (10*HZ), 5, 0);
+
+ if (driver_byte(cmd_result) == DRIVER_SENSE) {/* sense data available */
+ u8 *desc = sensebuf + 8;
+ cmd_result &= ~(0xFF<<24); /* DRIVER_SENSE is not an error */
+
+ /* If we set cc then ATA pass-through will cause a
+ * check condition even if no error. Filter that. */
+ if (cmd_result & SAM_STAT_CHECK_CONDITION) {
+ struct scsi_sense_hdr sshdr;
+ scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE,
+ &sshdr);
+ if (sshdr.sense_key==0 &&
+ sshdr.asc==0 && sshdr.ascq==0)
+ cmd_result &= ~SAM_STAT_CHECK_CONDITION;
+ }
+
+ /* Send userspace ATA registers */
+ if (sensebuf[0] == 0x72 && /* format is "descriptor" */
+ desc[0] == 0x09) {/* code is "ATA Descriptor" */
+ args[0] = desc[13]; /* status */
+ args[1] = desc[3]; /* error */
+ args[2] = desc[5]; /* sector count (0:7) */
+ args[3] = desc[7]; /* lbal */
+ args[4] = desc[9]; /* lbam */
+ args[5] = desc[11]; /* lbah */
+ args[6] = desc[12]; /* select */
+ if (copy_to_user(arg, args, sizeof(args)))
+ rc = -EFAULT;
+ }
+ }
+
+ if (cmd_result) {
rc = -EIO;
+ goto error;
+ }
- /* Need code to retrieve data from check condition? */
+ error:
+ kfree(sensebuf);
return rc;
}
@@ -372,7 +411,7 @@ struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev,
if (cmd->use_sg) {
qc->__sg = (struct scatterlist *) cmd->request_buffer;
qc->n_elem = cmd->use_sg;
- } else {
+ } else if (cmd->request_bufflen) {
qc->__sg = &qc->sgent;
qc->n_elem = 1;
}
@@ -983,11 +1022,10 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc)
}
tf->command = ATA_CMD_VERIFY; /* READ VERIFY */
- } else {
- tf->nsect = 0; /* time period value (0 implies now) */
- tf->command = ATA_CMD_STANDBY;
- /* Consider: ATA STANDBY IMMEDIATE command */
- }
+ } else
+ /* Issue ATA STANDBY IMMEDIATE command */
+ tf->command = ATA_CMD_STANDBYNOW1;
+
/*
* Standby and Idle condition timers could be implemented but that
* would require libata to implement the Power condition mode page
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 623cec914c9b..12c88c588039 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -827,7 +827,8 @@ void ata_bmdma_error_handler(struct ata_port *ap)
*/
void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc)
{
- ata_bmdma_stop(qc);
+ if (qc->ap->ioaddr.bmdma_addr)
+ ata_bmdma_stop(qc);
}
#ifdef CONFIG_PCI
@@ -870,7 +871,8 @@ ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int
pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS;
bmdma = pci_resource_start(pdev, 4);
if (bmdma) {
- if (inb(bmdma + 2) & 0x80)
+ if ((!(port[p]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
+ (inb(bmdma + 2) & 0x80))
probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
probe_ent->port[p].bmdma_addr = bmdma;
}
@@ -886,7 +888,8 @@ ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int
bmdma = pci_resource_start(pdev, 4);
if (bmdma) {
bmdma += 8;
- if(inb(bmdma + 2) & 0x80)
+ if ((!(port[p]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
+ (inb(bmdma + 2) & 0x80))
probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
probe_ent->port[p].bmdma_addr = bmdma;
}
@@ -914,13 +917,14 @@ static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev,
probe_ent->irq_flags = IRQF_SHARED;
if (port_mask & ATA_PORT_PRIMARY) {
- probe_ent->irq = ATA_PRIMARY_IRQ;
+ probe_ent->irq = ATA_PRIMARY_IRQ(pdev);
probe_ent->port[0].cmd_addr = ATA_PRIMARY_CMD;
probe_ent->port[0].altstatus_addr =
probe_ent->port[0].ctl_addr = ATA_PRIMARY_CTL;
if (bmdma) {
probe_ent->port[0].bmdma_addr = bmdma;
- if (inb(bmdma + 2) & 0x80)
+ if ((!(port[0]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
+ (inb(bmdma + 2) & 0x80))
probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
}
ata_std_ports(&probe_ent->port[0]);
@@ -929,15 +933,16 @@ static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev,
if (port_mask & ATA_PORT_SECONDARY) {
if (probe_ent->irq)
- probe_ent->irq2 = ATA_SECONDARY_IRQ;
+ probe_ent->irq2 = ATA_SECONDARY_IRQ(pdev);
else
- probe_ent->irq = ATA_SECONDARY_IRQ;
+ probe_ent->irq = ATA_SECONDARY_IRQ(pdev);
probe_ent->port[1].cmd_addr = ATA_SECONDARY_CMD;
probe_ent->port[1].altstatus_addr =
probe_ent->port[1].ctl_addr = ATA_SECONDARY_CTL;
if (bmdma) {
probe_ent->port[1].bmdma_addr = bmdma + 8;
- if (inb(bmdma + 10) & 0x80)
+ if ((!(port[1]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
+ (inb(bmdma + 10) & 0x80))
probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
}
ata_std_ports(&probe_ent->port[1]);
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 6f6672c55131..504e1dbfffd7 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -36,15 +36,22 @@ enum {
static int atiixp_pre_reset(struct ata_port *ap)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- static struct pci_bits atiixp_enable_bits[] = {
+ static const struct pci_bits atiixp_enable_bits[] = {
{ 0x48, 1, 0x01, 0x00 },
{ 0x48, 1, 0x08, 0x00 }
};
+ u8 udma;
if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no]))
return -ENOENT;
- ap->cbl = ATA_CBL_PATA80;
+ /* Hack from drivers/ide/pci. Really we want to know how to do the
+ raw detection not play follow the bios mode guess */
+ pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ap->port_no, &udma);
+ if ((udma & 0x07) >= 0x04 || (udma & 0x70) >= 0x40)
+ ap->cbl = ATA_CBL_PATA80;
+ else
+ ap->cbl = ATA_CBL_PATA40;
return ata_std_prereset(ap);
}
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 15841a563694..449162cbf93e 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -197,7 +197,7 @@ static void cmd64x_set_piomode(struct ata_port *ap, struct ata_device *adev)
static void cmd64x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
static const u8 udma_data[] = {
- 0x31, 0x21, 0x11, 0x25, 0x15, 0x05
+ 0x30, 0x20, 0x10, 0x20, 0x10, 0x00
};
static const u8 mwdma_data[] = {
0x30, 0x20, 0x10
@@ -213,12 +213,21 @@ static void cmd64x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
pci_read_config_byte(pdev, pciD, &regD);
pci_read_config_byte(pdev, pciU, &regU);
- regD &= ~(0x20 << shift);
- regU &= ~(0x35 << shift);
+ /* DMA bits off */
+ regD &= ~(0x20 << adev->devno);
+ /* DMA control bits */
+ regU &= ~(0x30 << shift);
+ /* DMA timing bits */
+ regU &= ~(0x05 << adev->devno);
- if (adev->dma_mode >= XFER_UDMA_0)
+ if (adev->dma_mode >= XFER_UDMA_0) {
+ /* Merge thge timing value */
regU |= udma_data[adev->dma_mode - XFER_UDMA_0] << shift;
- else
+ /* Merge the control bits */
+ regU |= 1 << adev->devno; /* UDMA on */
+ if (adev->dma_mode > 2) /* 15nS timing */
+ regU |= 4 << adev->devno;
+ } else
regD |= mwdma_data[adev->dma_mode - XFER_MW_DMA_0] << shift;
regD |= 0x20 << adev->devno;
@@ -239,8 +248,8 @@ static void cmd648_bmdma_stop(struct ata_queued_cmd *qc)
struct ata_port *ap = qc->ap;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
u8 dma_intr;
- int dma_reg = ap->port_no ? ARTTIM23_INTR_CH1 : CFR_INTR_CH0;
- int dma_mask = ap->port_no ? ARTTIM2 : CFR;
+ int dma_mask = ap->port_no ? ARTTIM23_INTR_CH1 : CFR_INTR_CH0;
+ int dma_reg = ap->port_no ? ARTTIM2 : CFR;
ata_bmdma_stop(qc);
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index f6817b4093a4..886fab9aa62c 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -25,7 +25,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt3x2n"
-#define DRV_VERSION "0.3"
+#define DRV_VERSION "0.3.2"
enum {
HPT_PCI_FAST = (1 << 31),
@@ -297,11 +297,11 @@ static int hpt3x2n_pair_idle(struct ata_port *ap)
return 0;
}
-static int hpt3x2n_use_dpll(struct ata_port *ap, int reading)
+static int hpt3x2n_use_dpll(struct ata_port *ap, int writing)
{
long flags = (long)ap->host->private_data;
/* See if we should use the DPLL */
- if (reading == 0)
+ if (writing)
return USE_DPLL; /* Needed for write */
if (flags & PCI66)
return USE_DPLL; /* Needed at 66Mhz */
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 0b56ff3d1cfe..e8afd486434a 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -476,6 +476,7 @@ static unsigned int it821x_passthru_qc_issue_prot(struct ata_queued_cmd *qc)
/**
* it821x_smart_set_mode - mode setting
* @ap: interface to set up
+ * @unused: device that failed (error only)
*
* Use a non standard set_mode function. We don't want to be tuned.
* The BIOS configured everything. Our job is not to fiddle. We
@@ -483,7 +484,7 @@ static unsigned int it821x_passthru_qc_issue_prot(struct ata_queued_cmd *qc)
* and respect them.
*/
-static void it821x_smart_set_mode(struct ata_port *ap)
+static int it821x_smart_set_mode(struct ata_port *ap, struct ata_device **unused)
{
int dma_enabled = 0;
int i;
@@ -512,6 +513,7 @@ static void it821x_smart_set_mode(struct ata_port *ap)
}
}
}
+ return 0;
}
/**
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index cb8924109f59..23b8aab3ebd8 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -23,9 +23,9 @@
#include <scsi/scsi_host.h>
#define DRV_NAME "pata_ixp4xx_cf"
-#define DRV_VERSION "0.1.1"
+#define DRV_VERSION "0.1.1ac1"
-static void ixp4xx_set_mode(struct ata_port *ap)
+static int ixp4xx_set_mode(struct ata_port *ap, struct ata_device *adev)
{
int i;
@@ -38,6 +38,7 @@ static void ixp4xx_set_mode(struct ata_port *ap)
dev->flags |= ATA_DFLAG_PIO;
}
}
+ return 0;
}
static void ixp4xx_phy_reset(struct ata_port *ap)
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 2d661cb4df3c..d50264af2848 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -204,20 +204,12 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i
u32 reg;
- if (id->driver_data != 368) {
- /* Put the controller into AHCI mode in case the AHCI driver
- has not yet been loaded. This can be done with either
- function present */
+ /* PATA controller is fn 1, AHCI is fn 0 */
+ if (id->driver_data != 368 && PCI_FUNC(pdev->devfn) != 1)
+ return -ENODEV;
- /* FIXME: We may want a way to override this in future */
- pci_write_config_byte(pdev, 0x41, 0xa1);
-
- /* PATA controller is fn 1, AHCI is fn 0 */
- if (PCI_FUNC(pdev->devfn) != 1)
- return -ENODEV;
- }
- if ( id->driver_data == 365 || id->driver_data == 366) {
- /* The 365/66 have two PATA channels, redirect the second */
+ /* The 365/66 have two PATA channels, redirect the second */
+ if (id->driver_data == 365 || id->driver_data == 366) {
pci_read_config_dword(pdev, 0x80, &reg);
reg |= (1 << 24); /* IDE1 to PATA IDE secondary */
pci_write_config_dword(pdev, 0x80, reg);
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index e7bf9d89c8ee..581cb33c6f45 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -96,6 +96,7 @@ static int pio_mask = 0x1F; /* PIO range for autospeed devices */
/**
* legacy_set_mode - mode setting
* @ap: IDE interface
+ * @unused: Device that failed when error is returned
*
* Use a non standard set_mode function. We don't want to be tuned.
*
@@ -105,7 +106,7 @@ static int pio_mask = 0x1F; /* PIO range for autospeed devices */
* expand on this as per hdparm in the base kernel.
*/
-static void legacy_set_mode(struct ata_port *ap)
+static int legacy_set_mode(struct ata_port *ap, struct ata_device **unused)
{
int i;
@@ -118,6 +119,7 @@ static void legacy_set_mode(struct ata_port *ap)
dev->flags |= ATA_DFLAG_PIO;
}
}
+ return 0;
}
static struct scsi_host_template legacy_sht = {
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index 443b1d85c6c4..40ae11cbfda4 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -30,7 +30,7 @@ static int pio_mask = 1;
* Provide our own set_mode() as we don't want to change anything that has
* already been configured..
*/
-static void pata_platform_set_mode(struct ata_port *ap)
+static int pata_platform_set_mode(struct ata_port *ap, struct ata_device **unused)
{
int i;
@@ -44,6 +44,7 @@ static void pata_platform_set_mode(struct ata_port *ap)
dev->flags |= ATA_DFLAG_PIO;
}
}
+ return 0;
}
static void pata_platform_host_stop(struct ata_host *host)
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index adf4cc134f25..cec0729225e1 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -52,19 +52,20 @@ static void rz1000_error_handler(struct ata_port *ap)
/**
* rz1000_set_mode - mode setting function
* @ap: ATA interface
+ * @unused: returned device on set_mode failure
*
* Use a non standard set_mode function. We don't want to be tuned. We
* would prefer to be BIOS generic but for the fact our hardware is
* whacked out.
*/
-static void rz1000_set_mode(struct ata_port *ap)
+static int rz1000_set_mode(struct ata_port *ap, struct ata_device **unused)
{
int i;
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
- if (ata_dev_enabled(dev)) {
+ if (ata_dev_ready(dev)) {
/* We don't really care */
dev->pio_mode = XFER_PIO_0;
dev->xfer_mode = XFER_PIO_0;
@@ -72,6 +73,7 @@ static void rz1000_set_mode(struct ata_port *ap)
dev->flags |= ATA_DFLAG_PIO;
}
}
+ return 0;
}
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 32cf0bfa8921..e8dfd8fc3ff7 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -135,7 +135,7 @@ static void sil680_error_handler(struct ata_port *ap)
static void sil680_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
static u16 speed_p[5] = { 0x328A, 0x2283, 0x1104, 0x10C3, 0x10C1 };
- static u16 speed_t[5] = { 0x328A, 0x1281, 0x1281, 0x10C3, 0x10C1 };
+ static u16 speed_t[5] = { 0x328A, 0x2283, 0x1281, 0x10C3, 0x10C1 };
unsigned long tfaddr = sil680_selreg(ap, 0x02);
unsigned long addr = sil680_seldev(ap, adev, 0x04);
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index f0d4f7e9ed31..f0b6c3b71429 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -23,6 +23,7 @@
* VIA VT8233c - UDMA100
* VIA VT8235 - UDMA133
* VIA VT8237 - UDMA133
+ * VIA VT8237S - UDMA133
* VIA VT8251 - UDMA133
*
* Most registers remain compatible across chips. Others start reserved
@@ -61,7 +62,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_via"
-#define DRV_VERSION "0.2.0"
+#define DRV_VERSION "0.2.1"
/*
* The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx
@@ -95,6 +96,7 @@ static const struct via_isa_bridge {
u8 rev_max;
u16 flags;
} via_isa_bridges[] = {
+ { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES},
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index f6d498e1cf80..f7a963eb1f02 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -700,7 +700,6 @@ static void nv_adma_check_cpb(struct ata_port *ap, int cpb_num, int force_err)
static int nv_host_intr(struct ata_port *ap, u8 irq_stat)
{
struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
- int handled;
/* freeze if hotplugged */
if (unlikely(irq_stat & (NV_INT_ADDED | NV_INT_REMOVED))) {
@@ -719,13 +718,7 @@ static int nv_host_intr(struct ata_port *ap, u8 irq_stat)
}
/* handle interrupt */
- handled = ata_host_intr(ap, qc);
- if (unlikely(!handled)) {
- /* spurious, clear it */
- ata_check_status(ap);
- }
-
- return 1;
+ return ata_host_intr(ap, qc);
}
static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
@@ -752,6 +745,11 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
if (pp->flags & NV_ADMA_PORT_REGISTER_MODE) {
u8 irq_stat = readb(host->mmio_base + NV_INT_STATUS_CK804)
>> (NV_INT_PORT_SHIFT * i);
+ if(ata_tag_valid(ap->active_tag))
+ /** NV_INT_DEV indication seems unreliable at times
+ at least in ADMA mode. Force it on always when a
+ command is active, to prevent losing interrupts. */
+ irq_stat |= NV_INT_DEV;
handled += nv_host_intr(ap, irq_stat);
continue;
}
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index 5c603ca3a50a..a43aec62d505 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -128,7 +128,8 @@ static const struct ata_port_operations uli_ops = {
static struct ata_port_info uli_port_info = {
.sht = &uli_sht,
- .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+ .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_IGN_SIMPLEX,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = 0x7f, /* udma0-6 */
.port_ops = &uli_ops,
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 88f0565c8883..d3d5c0d57032 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -74,6 +74,7 @@ enum {
static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
static u32 svia_scr_read (struct ata_port *ap, unsigned int sc_reg);
static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
+static void svia_noop_freeze(struct ata_port *ap);
static void vt6420_error_handler(struct ata_port *ap);
static const struct pci_device_id svia_pci_tbl[] = {
@@ -128,7 +129,7 @@ static const struct ata_port_operations vt6420_sata_ops = {
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_pio_data_xfer,
- .freeze = ata_bmdma_freeze,
+ .freeze = svia_noop_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = vt6420_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
@@ -204,6 +205,15 @@ static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
outl(val, ap->ioaddr.scr_addr + (4 * sc_reg));
}
+static void svia_noop_freeze(struct ata_port *ap)
+{
+ /* Some VIA controllers choke if ATA_NIEN is manipulated in
+ * certain way. Leave it alone and just clear pending IRQ.
+ */
+ ata_chk_status(ap);
+ ata_bmdma_irq_clear(ap);
+}
+
/**
* vt6420_prereset - prereset for vt6420
* @ap: target ATA port
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.